diff options
Diffstat (limited to 'keyboards/manta60/config.h')
| -rw-r--r-- | keyboards/manta60/config.h | 118 |
1 files changed, 72 insertions, 46 deletions
diff --git a/keyboards/manta60/config.h b/keyboards/manta60/config.h index 0bc49541c9..8bb63a566e 100644 --- a/keyboards/manta60/config.h +++ b/keyboards/manta60/config.h @@ -20,12 +20,11 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #include "config_common.h" /* USB Device descriptor parameter */ -#define VENDOR_ID 0xFEED -#define PRODUCT_ID 0x991D -#define DEVICE_VER 0x0001 +#define VENDOR_ID 0xFEED +#define PRODUCT_ID 0x991D +#define DEVICE_VER 0x0001 #define MANUFACTURER kamonanban -#define PRODUCT manta60 -#define DESCRIPTION A split keyboard with 27 ortholinear keys and 5-7 thumb/little finger keys +#define PRODUCT manta60 /* key matrix size */ #define MATRIX_ROWS 10 @@ -45,7 +44,7 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #define MATRIX_COL_PINS { F4, F5, F6, F7, B1, B3, B2 } #define UNUSED_PINS -/* COL2ROW, ROW2COL*/ +/* COL2ROW, ROW2COL */ #define DIODE_DIRECTION COL2ROW /* @@ -54,50 +53,45 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #define SOFT_SERIAL_PIN D2 #define SELECT_SOFT_SERIAL_SPEED 1 -#define RGBLIGHT_SPLIT #define RGB_DI_PIN D3 - -#ifdef RGBLIGHT_ENABLE - #define RGBLED_NUM 68 // Number of LEDs - #define RGBLED_SPLIT { 34, 34 } -#endif - #ifdef RGB_DI_PIN - #define RGBLIGHT_ANIMATIONS -// /*== or choose animations ==*/ -// #define RGBLIGHT_EFFECT_BREATHING -// #define RGBLIGHT_EFFECT_RAINBOW_MOOD -// #define RGBLIGHT_EFFECT_RAINBOW_SWIRL -// #define RGBLIGHT_EFFECT_SNAKE -// #define RGBLIGHT_EFFECT_KNIGHT -// #define RGBLIGHT_EFFECT_CHRISTMAS -// #define RGBLIGHT_EFFECT_STATIC_GRADIENT -// #define RGBLIGHT_EFFECT_RGB_TEST -// #define RGBLIGHT_EFFECT_ALTERNATING -// /*== customize breathing effect ==*/ -// /*==== (DEFAULT) use fixed table instead of exp() and sin() ====*/ -// #define RGBLIGHT_BREATHE_TABLE_SIZE 256 // 256(default) or 128 or 64 -// /*==== use exp() and sin() ====*/ -// #define RGBLIGHT_EFFECT_BREATHE_CENTER 1.85 // 1 to 2.7 -// #define RGBLIGHT_EFFECT_BREATHE_MAX 255 // 0 to 255 -#endif - -#ifndef IOS_DEVICE_ENABLE - /* The maximum brightness level */ - #define RGBLIGHT_LIMIT_VAL 128 - #define RGBLIGHT_VAL_STEP 16 -#else - #define RGBLIGHT_LIMIT_VAL 32 - #define RGBLIGHT_VAL_STEP 4 +# define RGBLED_NUM 68 +# define RGBLIGHT_SPLIT +# define RGBLED_SPLIT { 34, 34 } +# define RGBLIGHT_HUE_STEP 8 +# define RGBLIGHT_SAT_STEP 8 +# ifndef IOS_DEVICE_ENABLE +# define RGBLIGHT_VAL_STEP 16 +# define RGBLIGHT_LIMIT_VAL 128 /* The maximum brightness level */ +# else +# define RGBLIGHT_VAL_STEP 4 +# define RGBLIGHT_LIMIT_VAL 32 /* The maximum brightness level */ +# endif +//# define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */ +/*== all animations enable ==*/ +# define RGBLIGHT_ANIMATIONS +/*== or choose animations ==*/ +//# define RGBLIGHT_EFFECT_BREATHING +//# define RGBLIGHT_EFFECT_RAINBOW_MOOD +//# define RGBLIGHT_EFFECT_RAINBOW_SWIRL +//# define RGBLIGHT_EFFECT_SNAKE +//# define RGBLIGHT_EFFECT_KNIGHT +//# define RGBLIGHT_EFFECT_CHRISTMAS +//# define RGBLIGHT_EFFECT_STATIC_GRADIENT +//# define RGBLIGHT_EFFECT_RGB_TEST +//# define RGBLIGHT_EFFECT_ALTERNATING +/*== customize breathing effect ==*/ +/*==== (DEFAULT) use fixed table instead of exp() and sin() ====*/ +//# define RGBLIGHT_BREATHE_TABLE_SIZE 256 // 256(default) or 128 or 64 +/*==== use exp() and sin() ====*/ +//# define RGBLIGHT_EFFECT_BREATHE_CENTER 1.85 // 1 to 2.7 +//# define RGBLIGHT_EFFECT_BREATHE_MAX 255 // 0 to 255 #endif -#define RGBLIGHT_HUE_STEP 8 -#define RGBLIGHT_SAT_STEP 8 - #if defined(RGBLIGHT_ENABLE) && !defined(IOS_DEVICE_ENABLE) - #define USB_MAX_POWER_CONSUMPTION 400 +# define USB_MAX_POWER_CONSUMPTION 400 #else - #define USB_MAX_POWER_CONSUMPTION 100 +# define USB_MAX_POWER_CONSUMPTION 100 #endif /* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ @@ -111,6 +105,32 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. /* Locking resynchronize hack */ #define LOCKING_RESYNC_ENABLE +/* If defined, GRAVE_ESC will always act as ESC when CTRL is held. + * This is useful for the Windows task manager shortcut (ctrl+shift+esc). + */ +//#define GRAVE_ESC_CTRL_OVERRIDE + +/* + * Force NKRO + * + * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved + * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the + * makefile for this to work.) + * + * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N) + * until the next keyboard reset. + * + * NKRO may prevent your keystrokes from being detected in the BIOS, but it is + * fully operational during normal computer usage. + * + * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N) + * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by + * bootmagic, NKRO mode will always be enabled until it is toggled again during a + * power-up. + * + */ +//#define FORCE_NKRO + /* * Feature disable options * These options are also useful to firmware size reduction. @@ -126,5 +146,11 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. //#define NO_ACTION_LAYER //#define NO_ACTION_TAPPING //#define NO_ACTION_ONESHOT -//#define NO_ACTION_MACRO -//#define NO_ACTION_FUNCTION + +/* disable these deprecated features by default */ +#define NO_ACTION_MACRO +#define NO_ACTION_FUNCTION + +/* Bootmagic Lite key configuration */ +//#define BOOTMAGIC_LITE_ROW 0 +//#define BOOTMAGIC_LITE_COLUMN 0 |