diff options
Diffstat (limited to 'keyboards/linworks/whale75/config.h')
| -rw-r--r-- | keyboards/linworks/whale75/config.h | 79 |
1 files changed, 79 insertions, 0 deletions
diff --git a/keyboards/linworks/whale75/config.h b/keyboards/linworks/whale75/config.h new file mode 100644 index 0000000000..5ba4494309 --- /dev/null +++ b/keyboards/linworks/whale75/config.h @@ -0,0 +1,79 @@ +/* +Copyright 2020 Moritz Plattner +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. +You should have received a copy of the GNU General Public License +along with this program. If not, see <http://www.gnu.org/licenses/>. +*/ + +#pragma once + +#include "config_common.h" + +/* USB Device descriptor parameter */ +#define VENDOR_ID 0x4C58 //"LX" +#define PRODUCT_ID 0x0001 +#define DEVICE_VER 0x0001 +#define MANUFACTURER Lx3 +#define PRODUCT Whale-75 + +/* Set 1 kHz polling rate and force USB NKRO */ +#define USB_POLLING_INTERVAL_MS 1 +#define FORCE_NKRO + +/* key matrix size */ +#define MATRIX_ROWS 6 +#define MATRIX_COLS 16 + +#define MATRIX_ROW_PINS { B3, B4, B5, B6, B7, A0 } +#define MATRIX_COL_PINS { A1, A2, A3, A4, A5, A6, A7, B0, B1, B2, B10, B11, B12, B13, B14, B15 } +#define UNUSED_PINS { C13, C14, C15 } + +/* COL2ROW, ROW2COL */ +#define DIODE_DIRECTION COL2ROW +#define DEBOUNCE 5 + +#define LED_NUM_LOCK_PIN A8 +#define LED_CAPS_LOCK_PIN A9 +#define LED_SCROLL_LOCK_PIN A13 +#define LED_PIN_ON_STATE 0 + +/* Backlight */ +#define BACKLIGHT_PIN A10 +#define BACKLIGHT_BREATHING +#define BACKLIGHT_PWM_DRIVER PWMD1 +#define BACKLIGHT_PWM_CHANNEL 3 +#define BACKLIGHT_PAL_MODE 6 +#define BACKLIGHT_LEVELS 5 +#define BACKLIGHT_ON_STATE 1 +#define BACKLIGHT_PWM_OUTPUT_FREQUENCY 1000 // Increases backlight PWM freq if compiled with an unmerged PR. Does no harm without it. + +/* Underglow */ +#define RGB_DI_PIN B9 +#define WS2812_EXTERNAL_PULLUP // This board uses a pull-up + 5 V tolerant GPIO in open drain config ro generate a 5 V signal +#define RGBLED_NUM 18 +/* section for PWM WS2812 driver */ +#define WS2812_PWM_DRIVER PWMD4 +#define WS2812_PWM_CHANNEL 4 +#define WS2812_PWM_PAL_MODE 2 +#define WS2812_DMA_STREAM STM32_DMA1_STREAM7 +#define WS2812_DMA_CHANNEL 7 +#define RGBLIGHT_SLEEP +#define RGBLIGHT_EFFECT_BREATHING +#define RGBLIGHT_EFFECT_RAINBOW_MOOD +#define RGBLIGHT_EFFECT_RAINBOW_SWIRL + + +/* Rotary encoder - set the resolution fitting your encoder. +Most will need a value of 4. If 1 encoder click results in 2 keycodes sent +double the value. If you need 2 clicks for 1 keycode, half it */ +#define ENCODER_RESOLUTION 2 +#define ENCODERS_PAD_A { A15 } +#define ENCODERS_PAD_B { A14 } +#define TAP_CODE_DELAY 10 |