summaryrefslogtreecommitdiff
path: root/keyboards/latin6rgb/config.h
diff options
context:
space:
mode:
Diffstat (limited to 'keyboards/latin6rgb/config.h')
-rw-r--r--keyboards/latin6rgb/config.h106
1 files changed, 106 insertions, 0 deletions
diff --git a/keyboards/latin6rgb/config.h b/keyboards/latin6rgb/config.h
new file mode 100644
index 0000000000..4052fdc991
--- /dev/null
+++ b/keyboards/latin6rgb/config.h
@@ -0,0 +1,106 @@
+/* Copyright 2021 18438880
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see <http://www.gnu.org/licenses/>.
+ */
+
+
+#pragma once
+
+/* USB Device descriptor parameter */
+#include "config_common.h"
+#define VENDOR_ID 0x7C88 // "hw" = haierwangwei
+#define PRODUCT_ID 0x7C96 // "lp" = latin6RGB
+#define DEVICE_VER 0x0001
+#define MANUFACTURER 18438880
+#define PRODUCT Latin6rgb
+
+/* key matrix size */
+#define MATRIX_ROWS 2
+#define MATRIX_COLS 3
+
+/*
+ * Keyboard Matrix Assignments
+ *
+ * Change this to how you wired your keyboard
+ * COLS: AVR pins used for columns, left to right
+ * ROWS: AVR pins used for rows, top to bottom
+ * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
+ * ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
+ *
+ */
+#define MATRIX_ROW_PINS {C7, C6 }
+#define MATRIX_COL_PINS {F7, F6, F5}
+#define UNUSED_PINS
+
+/* COL2ROW, ROW2COL*/
+#define DIODE_DIRECTION ROW2COL
+
+/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
+#define DEBOUNCE 3
+
+/* disable these deprecated features by default */
+//#ifndef LINK_TIME_OPTIMIZATION_ENABLE
+//# define NO_ACTION_MACRO
+//# define NO_ACTION_FUNCTION
+//#endif
+
+#ifdef RGB_MATRIX_ENABLE
+# define RGB_DISABLE_AFTER_TIMEOUT 0 // number of ticks to wait until disabling effects
+# define RGB_DISABLE_WHEN_USB_SUSPENDED true // turn off effects when suspended
+# define RGB_MATRIX_KEYPRESSES
+# define RGB_MATRIX_FRAMEBUFFER_EFFECTS
+# define DISABLE_RGB_MATRIX_GRADIENT_UP_DOWN
+# define DISABLE_RGB_MATRIX_BAND_SAT
+# define DISABLE_RGB_MATRIX_BAND_PINWHEEL_SAT
+# define DISABLE_RGB_MATRIX_BAND_SPIRAL_SAT
+# define DISABLE_RGB_MATRIX_SOLID_REACTIVE_WIDE
+# define DISABLE_RGB_MATRIX_SOLID_REACTIVE_MULTIWIDE
+# define DISABLE_RGB_MATRIX_SOLID_REACTIVE_CROSS
+# define DISABLE_RGB_MATRIX_SOLID_REACTIVE_MULTICROSS
+# define DISABLE_RGB_MATRIX_SOLID_REACTIVE_NEXUS
+# define DISABLE_RGB_MATRIX_SOLID_REACTIVE_MULTINEXUS
+# define DISABLE_RGB_MATRIX_SPLASH
+# define DISABLE_RGB_MATRIX_MULTISPLASH
+# define DISABLE_RGB_MATRIX_SOLID_SPLASH
+# define DISABLE_RGB_MATRIX_SOLID_MULTISPLASH
+# define DISABLE_RGB_MATRIX_DIGITAL_RAIN
+
+// This is a 7-bit address, that gets left-shifted and bit 0
+// set to 0 for write, 1 for read (as per I2C protocol)
+// The address will vary depending on your wiring:
+// 0b1110100 AD <-> GND
+// 0b1110111 AD <-> VCC
+// 0b1110101 AD <-> SCL
+// 0b1110110 AD <-> SDA
+#define DRIVER_ADDR_1 0b1110100
+//#define DRIVER_ADDR_2 0b1110110
+
+#define DRIVER_COUNT 1
+#define DRIVER_1_LED_TOTAL 6
+//#define DRIVER_1_LED_TOTAL 25
+//#define DRIVER_2_LED_TOTAL 24
+//#define DRIVER_LED_TOTAL (DRIVER_1_LED_TOTAL + DRIVER_2_LED_TOTAL)
+#define DRIVER_LED_TOTAL DRIVER_1_LED_TOTAL
+#endif
+//#define RGB_DI_PIN B7
+//#ifdef RGB_DI_PIN
+//#define RGBLIGHT_ANIMATIONS
+//#define RGBLED_NUM 8
+//#define RGBLIGHT_HUE_STEP 5
+//#define RGBLIGHT_SAT_STEP 5
+//#define RGBLIGHT_VAL_STEP 5
+//#define RGBLIGHT_SLEEP
+//#endif
+
+#define B7_AUDIO