1 files changed, 0 insertions, 125 deletions
diff --git a/keyboards/latin47ble/config.h b/keyboards/latin47ble/config.h
deleted file mode 100644
index f9f94d0dbf..0000000000
--- a/keyboards/latin47ble/config.h
+++ /dev/null
@@ -1,125 +0,0 @@
- /* Copyright 2020 haierwangwei2005
-  * 
-  * This program is free software: you can redistribute it and/or modify 
-  * it under the terms of the GNU General Public License as published by 
-  * the Free Software Foundation, either version 2 of the License, or 
-  * (at your option) any later version. 
-  * 
-  * This program is distributed in the hope that it will be useful, 
-  * but WITHOUT ANY WARRANTY; without even the implied warranty of 
-  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the 
-  * GNU General Public License for more details. 
-  * 
-  * You should have received a copy of the GNU General Public License 
-  * along with this program.  If not, see <http://www.gnu.org/licenses/>. 
-  */ 
-
-#pragma once
-
-#include "config_common.h"
-
-/* USB Device descriptor parameter */ 
-#define VENDOR_ID       0x6C63 // "lc" = latincompass
-#define PRODUCT_ID      0x6C62 // "lb" = latin47BLE
-#define DEVICE_VER      0x0001
-#define MANUFACTURER    latincompass
-#define PRODUCT         Latin47BLE
-
-/* key matrix size */
-#define MATRIX_ROWS 4
-#define MATRIX_COLS 12
-
-/*
- * Keyboard Matrix Assignments
- *
- * Change this to how you wired your keyboard
- * COLS: AVR pins used for columns, left to right
- * ROWS: AVR pins used for rows, top to bottom
- * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
- *                  ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
- *
-*/
-#define MATRIX_ROW_PINS { D0, D1, D2, D3 }
-#define MATRIX_COL_PINS { D6, D7, B5, B6 ,C6, C7, F7, F6, F5, F4, F1, F0 }
-#define UNUSED_PINS
-
-/* COL2ROW or ROW2COL */
-#define DIODE_DIRECTION COL2ROW
-
-#define RGB_DI_PIN B7
-#ifdef RGB_DI_PIN
-     #define RGBLED_NUM 3
-     #define RGBLIGHT_HUE_STEP 8
-     #define RGBLIGHT_SAT_STEP 8
-     #define RGBLIGHT_VAL_STEP 8
-//   #define RGBLIGHT_LIMIT_VAL 255 /* The maximum brightness level */
-//   #define RGBLIGHT_SLEEP  /* If defined, the RGB lighting will be switched off when the host goes to sleep */
-// /*== all animations enable ==*/
-     #define RGBLIGHT_ANIMATIONS
-// /*== or choose animations ==*/
-//   #define RGBLIGHT_EFFECT_BREATHING
-//   #define RGBLIGHT_EFFECT_RAINBOW_MOOD
-//   #define RGBLIGHT_EFFECT_RAINBOW_SWIRL
-//   #define RGBLIGHT_EFFECT_SNAKE
-//   #define RGBLIGHT_EFFECT_KNIGHT
-//   #define RGBLIGHT_EFFECT_CHRISTMAS
-//   #define RGBLIGHT_EFFECT_STATIC_GRADIENT
-//   #define RGBLIGHT_EFFECT_RGB_TEST
-//   #define RGBLIGHT_EFFECT_ALTERNATING
-#endif
-
-#define TAPPING_TERM 250
-
-/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
-#define DEBOUNCE 5
-
-/* define if matrix has ghost (lacks anti-ghosting diodes) */
-//#define MATRIX_HAS_GHOST
-
-/* number of backlight levels */
-
-/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
-#define LOCKING_SUPPORT_ENABLE
-/* Locking resynchronize hack */
-#define LOCKING_RESYNC_ENABLE
-
-/*
- * Force NKRO
- *
- * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
- * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
- * makefile for this to work.)
- *
- * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
- * until the next keyboard reset.
- *
- * NKRO may prevent your keystrokes from being detected in the BIOS, but it is
- * fully operational during normal computer usage.
- *
- * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
- * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
- * bootmagic, NKRO mode will always be enabled until it is toggled again during a
- * power-up.
- *
- */
-//#define FORCE_NKRO
-
-/*
- * Feature disable options
- *  These options are also useful to firmware size reduction.
- */
-
-/* disable debug print */
-//#define NO_DEBUG
-
-/* disable print */
-//#define NO_PRINT
-
-/* disable action features */
-//#define NO_ACTION_LAYER
-//#define NO_ACTION_TAPPING
-//#define NO_ACTION_ONESHOT
-//#define NO_ACTION_MACRO
-//#define NO_ACTION_FUNCTION
-
-#define VIA_HAS_BROKEN_KEYCODES