summaryrefslogtreecommitdiff
path: root/keyboards/kkatano
diff options
context:
space:
mode:
Diffstat (limited to 'keyboards/kkatano')
-rw-r--r--keyboards/kkatano/bakeneko60/config.h41
-rw-r--r--keyboards/kkatano/bakeneko60/info.json3
-rw-r--r--keyboards/kkatano/bakeneko60/rules.mk8
-rw-r--r--keyboards/kkatano/bakeneko65/rev2/config.h41
-rw-r--r--keyboards/kkatano/bakeneko65/rev2/info.json3
-rw-r--r--keyboards/kkatano/bakeneko65/rev2/rules.mk8
-rw-r--r--keyboards/kkatano/bakeneko65/rev3/config.h41
-rw-r--r--keyboards/kkatano/bakeneko65/rev3/info.json2
-rw-r--r--keyboards/kkatano/bakeneko65/rev3/rules.mk6
-rw-r--r--keyboards/kkatano/bakeneko80/config.h66
-rw-r--r--keyboards/kkatano/bakeneko80/info.json3
-rw-r--r--keyboards/kkatano/bakeneko80/rules.mk8
-rw-r--r--keyboards/kkatano/wallaby/config.h66
-rw-r--r--keyboards/kkatano/wallaby/info.json3
-rw-r--r--keyboards/kkatano/wallaby/rules.mk8
-rw-r--r--keyboards/kkatano/yurei/config.h66
-rw-r--r--keyboards/kkatano/yurei/info.json3
-rw-r--r--keyboards/kkatano/yurei/rules.mk8
18 files changed, 17 insertions, 367 deletions
diff --git a/keyboards/kkatano/bakeneko60/config.h b/keyboards/kkatano/bakeneko60/config.h
index fc3da670dc..49833d6b6d 100644
--- a/keyboards/kkatano/bakeneko60/config.h
+++ b/keyboards/kkatano/bakeneko60/config.h
@@ -17,11 +17,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
#pragma once
-#include "config_common.h"
-
-/* key matrix size */
-#define MATRIX_ROWS 5
-#define MATRIX_COLS 15
/*
* Keyboard Matrix Assignments
@@ -39,43 +34,11 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
/* COL2ROW, ROW2COL */
#define DIODE_DIRECTION COL2ROW
-/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
-#define DEBOUNCE 5
-
-/* define if matrix has ghost (lacks anti-ghosting diodes) */
-//#define MATRIX_HAS_GHOST
-
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
#define LOCKING_SUPPORT_ENABLE
/* Locking resynchronize hack */
#define LOCKING_RESYNC_ENABLE
-/* If defined, GRAVE_ESC will always act as ESC when CTRL is held.
- * This is useful for the Windows task manager shortcut (ctrl+shift+esc).
- */
-//#define GRAVE_ESC_CTRL_OVERRIDE
-
-/*
- * Force NKRO
- *
- * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
- * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
- * makefile for this to work.)
- *
- * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
- * until the next keyboard reset.
- *
- * NKRO may prevent your keystrokes from being detected in the BIOS, but it is
- * fully operational during normal computer usage.
- *
- * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
- * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
- * bootmagic, NKRO mode will always be enabled until it is toggled again during a
- * power-up.
- *
- */
-//#define FORCE_NKRO
-
/*
* Feature disable options
* These options are also useful to firmware size reduction.
@@ -91,7 +54,3 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
//#define NO_ACTION_LAYER
//#define NO_ACTION_TAPPING
//#define NO_ACTION_ONESHOT
-
-/* Bootmagic Lite key configuration */
-//#define BOOTMAGIC_LITE_ROW 0
-//#define BOOTMAGIC_LITE_COLUMN 0
diff --git a/keyboards/kkatano/bakeneko60/info.json b/keyboards/kkatano/bakeneko60/info.json
index 7d957740a6..e4335d1147 100644
--- a/keyboards/kkatano/bakeneko60/info.json
+++ b/keyboards/kkatano/bakeneko60/info.json
@@ -8,6 +8,9 @@
"pid": "0xCBDC",
"device_version": "0.0.1"
},
+ "processor": "atmega32u4",
+ "bootloader": "atmel-dfu",
+ "community_layouts": ["60_ansi_split_bs_rshift", "60_ansi", "60_tsangan_hhkb"],
"layouts": {
"LAYOUT_60_ansi_split_bs_rshift": {
"layout": [
diff --git a/keyboards/kkatano/bakeneko60/rules.mk b/keyboards/kkatano/bakeneko60/rules.mk
index 157a9de50e..ab2c49da70 100644
--- a/keyboards/kkatano/bakeneko60/rules.mk
+++ b/keyboards/kkatano/bakeneko60/rules.mk
@@ -1,9 +1,3 @@
-# MCU name
-MCU = atmega32u4
-
-# Bootloader selection
-BOOTLOADER = atmel-dfu
-
# Build Options
# change yes to no to disable
#
@@ -16,5 +10,3 @@ NKRO_ENABLE = no # Enable N-Key Rollover
BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality
RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow
AUDIO_ENABLE = no # Audio output
-
-LAYOUTS = 60_ansi_split_bs_rshift 60_ansi 60_tsangan_hhkb
diff --git a/keyboards/kkatano/bakeneko65/rev2/config.h b/keyboards/kkatano/bakeneko65/rev2/config.h
index 442f69238f..6263646091 100644
--- a/keyboards/kkatano/bakeneko65/rev2/config.h
+++ b/keyboards/kkatano/bakeneko65/rev2/config.h
@@ -17,11 +17,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
#pragma once
-#include "config_common.h"
-
-/* key matrix size */
-#define MATRIX_ROWS 5
-#define MATRIX_COLS 16
/*
* Keyboard Matrix Assignments
@@ -39,43 +34,11 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
/* COL2ROW, ROW2COL */
#define DIODE_DIRECTION COL2ROW
-/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
-#define DEBOUNCE 5
-
-/* define if matrix has ghost (lacks anti-ghosting diodes) */
-//#define MATRIX_HAS_GHOST
-
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
#define LOCKING_SUPPORT_ENABLE
/* Locking resynchronize hack */
#define LOCKING_RESYNC_ENABLE
-/* If defined, GRAVE_ESC will always act as ESC when CTRL is held.
- * This is useful for the Windows task manager shortcut (ctrl+shift+esc).
- */
-//#define GRAVE_ESC_CTRL_OVERRIDE
-
-/*
- * Force NKRO
- *
- * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
- * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
- * makefile for this to work.)
- *
- * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
- * until the next keyboard reset.
- *
- * NKRO may prevent your keystrokes from being detected in the BIOS, but it is
- * fully operational during normal computer usage.
- *
- * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
- * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
- * bootmagic, NKRO mode will always be enabled until it is toggled again during a
- * power-up.
- *
- */
-//#define FORCE_NKRO
-
/*
* Feature disable options
* These options are also useful to firmware size reduction.
@@ -91,7 +54,3 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
//#define NO_ACTION_LAYER
//#define NO_ACTION_TAPPING
//#define NO_ACTION_ONESHOT
-
-/* Bootmagic Lite key configuration */
-//#define BOOTMAGIC_LITE_ROW 0
-//#define BOOTMAGIC_LITE_COLUMN 0
diff --git a/keyboards/kkatano/bakeneko65/rev2/info.json b/keyboards/kkatano/bakeneko65/rev2/info.json
index 064934b475..63cbf3ab7f 100644
--- a/keyboards/kkatano/bakeneko65/rev2/info.json
+++ b/keyboards/kkatano/bakeneko65/rev2/info.json
@@ -8,6 +8,9 @@
"pid": "0x4C82",
"device_version": "0.0.1"
},
+ "processor": "atmega32u4",
+ "bootloader": "atmel-dfu",
+ "community_layouts": ["65_ansi"],
"layouts": {
"LAYOUT_65_ansi_split_bs": {
"layout": [
diff --git a/keyboards/kkatano/bakeneko65/rev2/rules.mk b/keyboards/kkatano/bakeneko65/rev2/rules.mk
index 26af9d2afc..ab2c49da70 100644
--- a/keyboards/kkatano/bakeneko65/rev2/rules.mk
+++ b/keyboards/kkatano/bakeneko65/rev2/rules.mk
@@ -1,9 +1,3 @@
-# MCU name
-MCU = atmega32u4
-
-# Bootloader selection
-BOOTLOADER = atmel-dfu
-
# Build Options
# change yes to no to disable
#
@@ -16,5 +10,3 @@ NKRO_ENABLE = no # Enable N-Key Rollover
BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality
RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow
AUDIO_ENABLE = no # Audio output
-
-LAYOUTS = 65_ansi
diff --git a/keyboards/kkatano/bakeneko65/rev3/config.h b/keyboards/kkatano/bakeneko65/rev3/config.h
index 442f69238f..6263646091 100644
--- a/keyboards/kkatano/bakeneko65/rev3/config.h
+++ b/keyboards/kkatano/bakeneko65/rev3/config.h
@@ -17,11 +17,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
#pragma once
-#include "config_common.h"
-
-/* key matrix size */
-#define MATRIX_ROWS 5
-#define MATRIX_COLS 16
/*
* Keyboard Matrix Assignments
@@ -39,43 +34,11 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
/* COL2ROW, ROW2COL */
#define DIODE_DIRECTION COL2ROW
-/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
-#define DEBOUNCE 5
-
-/* define if matrix has ghost (lacks anti-ghosting diodes) */
-//#define MATRIX_HAS_GHOST
-
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
#define LOCKING_SUPPORT_ENABLE
/* Locking resynchronize hack */
#define LOCKING_RESYNC_ENABLE
-/* If defined, GRAVE_ESC will always act as ESC when CTRL is held.
- * This is useful for the Windows task manager shortcut (ctrl+shift+esc).
- */
-//#define GRAVE_ESC_CTRL_OVERRIDE
-
-/*
- * Force NKRO
- *
- * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
- * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
- * makefile for this to work.)
- *
- * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
- * until the next keyboard reset.
- *
- * NKRO may prevent your keystrokes from being detected in the BIOS, but it is
- * fully operational during normal computer usage.
- *
- * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
- * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
- * bootmagic, NKRO mode will always be enabled until it is toggled again during a
- * power-up.
- *
- */
-//#define FORCE_NKRO
-
/*
* Feature disable options
* These options are also useful to firmware size reduction.
@@ -91,7 +54,3 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
//#define NO_ACTION_LAYER
//#define NO_ACTION_TAPPING
//#define NO_ACTION_ONESHOT
-
-/* Bootmagic Lite key configuration */
-//#define BOOTMAGIC_LITE_ROW 0
-//#define BOOTMAGIC_LITE_COLUMN 0
diff --git a/keyboards/kkatano/bakeneko65/rev3/info.json b/keyboards/kkatano/bakeneko65/rev3/info.json
index 43e1170904..ad74ae3e74 100644
--- a/keyboards/kkatano/bakeneko65/rev3/info.json
+++ b/keyboards/kkatano/bakeneko65/rev3/info.json
@@ -8,6 +8,8 @@
"pid": "0x4C83",
"device_version": "0.0.1"
},
+ "processor": "atmega32u4",
+ "bootloader": "atmel-dfu",
"layouts": {
"LAYOUT_all": {
"layout": [{"x":0, "y":0.25}, {"x":1, "y":0.25}, {"x":2, "y":0.25}, {"x":3, "y":0.25}, {"x":4, "y":0.25}, {"x":5, "y":0.25}, {"x":6, "y":0.25}, {"x":7, "y":0.25}, {"x":8, "y":0.25}, {"x":9, "y":0.25}, {"x":10, "y":0.25}, {"x":11, "y":0.25}, {"x":12, "y":0.25}, {"x":13, "y":0.25}, {"x":14, "y":0.25}, {"x":15, "y":0.25}, {"x":0, "y":1.25, "w":1.5}, {"x":1.5, "y":1.25}, {"x":2.5, "y":1.25}, {"x":3.5, "y":1.25}, {"x":4.5, "y":1.25}, {"x":5.5, "y":1.25}, {"x":6.5, "y":1.25}, {"x":7.5, "y":1.25}, {"x":8.5, "y":1.25}, {"x":9.5, "y":1.25}, {"x":10.5, "y":1.25}, {"x":11.5, "y":1.25}, {"x":12.5, "y":1.25}, {"x":13.5, "y":1.25, "w":1.5}, {"x":15, "y":1.25}, {"x":0, "y":2.25, "w":1.75}, {"x":1.75, "y":2.25}, {"x":2.75, "y":2.25}, {"x":3.75, "y":2.25}, {"x":4.75, "y":2.25}, {"x":5.75, "y":2.25}, {"x":6.75, "y":2.25}, {"x":7.75, "y":2.25}, {"x":8.75, "y":2.25}, {"x":9.75, "y":2.25}, {"x":10.75, "y":2.25}, {"x":11.75, "y":2.25}, {"x":12.75, "y":2.25, "w":2.25}, {"x":15, "y":2.25}, {"x":0, "y":3.25, "w":2.25}, {"x":2.25, "y":3.25}, {"x":3.25, "y":3.25}, {"x":4.25, "y":3.25}, {"x":5.25, "y":3.25}, {"x":6.25, "y":3.25}, {"x":7.25, "y":3.25}, {"x":8.25, "y":3.25}, {"x":9.25, "y":3.25}, {"x":10.25, "y":3.25}, {"x":11.25, "y":3.25}, {"x":12.25, "y":3.25, "w":1.75}, {"x":14, "y":3.25}, {"x":15, "y":3.25}, {"x":0, "y":4.25, "w":1.25}, {"x":1.25, "y":4.25, "w":1.25}, {"x":2.5, "y":4.25, "w":1.25}, {"x":3.75, "y":4.25, "w":6.25}, {"x":10, "y":4.25, "w":1.25}, {"x":11.25, "y":4.25, "w":1.25}, {"x":13, "y":4.25}, {"x":14, "y":4.25}, {"x":15, "y":4.25}]
diff --git a/keyboards/kkatano/bakeneko65/rev3/rules.mk b/keyboards/kkatano/bakeneko65/rev3/rules.mk
index 1275531ef6..ab2c49da70 100644
--- a/keyboards/kkatano/bakeneko65/rev3/rules.mk
+++ b/keyboards/kkatano/bakeneko65/rev3/rules.mk
@@ -1,9 +1,3 @@
-# MCU name
-MCU = atmega32u4
-
-# Bootloader selection
-BOOTLOADER = atmel-dfu
-
# Build Options
# change yes to no to disable
#
diff --git a/keyboards/kkatano/bakeneko80/config.h b/keyboards/kkatano/bakeneko80/config.h
index 87b6705a75..d13b5396c6 100644
--- a/keyboards/kkatano/bakeneko80/config.h
+++ b/keyboards/kkatano/bakeneko80/config.h
@@ -17,11 +17,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
#pragma once
-#include "config_common.h"
-
-/* key matrix size */
-#define MATRIX_ROWS 6
-#define MATRIX_COLS 17
/*
* Keyboard Matrix Assignments
@@ -39,68 +34,11 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
/* COL2ROW, ROW2COL*/
#define DIODE_DIRECTION COL2ROW
-/*
- * Split Keyboard specific options, make sure you have 'SPLIT_KEYBOARD = yes' in your rules.mk, and define SOFT_SERIAL_PIN.
- */
-// #define SOFT_SERIAL_PIN D0 // or D1, D2, D3, E6
-
-// #define BACKLIGHT_PIN B7
-// #define BACKLIGHT_BREATHING
-// #define BACKLIGHT_LEVELS 3
-
-// #define RGB_DI_PIN E2
-// #ifdef RGB_DI_PIN
-// #define RGBLED_NUM 16
-// #define RGBLIGHT_HUE_STEP 8
-// #define RGBLIGHT_SAT_STEP 8
-// #define RGBLIGHT_VAL_STEP 8
-// #define RGBLIGHT_LIMIT_VAL 255 /* The maximum brightness level */
-// #define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */
-// /*== customize breathing effect ==*/
-// /*==== (DEFAULT) use fixed table instead of exp() and sin() ====*/
-// #define RGBLIGHT_BREATHE_TABLE_SIZE 256 // 256(default) or 128 or 64
-// /*==== use exp() and sin() ====*/
-// #define RGBLIGHT_EFFECT_BREATHE_CENTER 1.85 // 1 to 2.7
-// #define RGBLIGHT_EFFECT_BREATHE_MAX 255 // 0 to 255
-// #endif
-
-/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
-#define DEBOUNCE 5
-
-/* define if matrix has ghost (lacks anti-ghosting diodes) */
-//#define MATRIX_HAS_GHOST
-
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
#define LOCKING_SUPPORT_ENABLE
/* Locking resynchronize hack */
#define LOCKING_RESYNC_ENABLE
-/* If defined, GRAVE_ESC will always act as ESC when CTRL is held.
- * This is userful for the Windows task manager shortcut (ctrl+shift+esc).
- */
-// #define GRAVE_ESC_CTRL_OVERRIDE
-
-/*
- * Force NKRO
- *
- * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
- * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
- * makefile for this to work.)
- *
- * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
- * until the next keyboard reset.
- *
- * NKRO may prevent your keystrokes from being detected in the BIOS, but it is
- * fully operational during normal computer usage.
- *
- * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
- * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
- * bootmagic, NKRO mode will always be enabled until it is toggled again during a
- * power-up.
- *
- */
-//#define FORCE_NKRO
-
/*
* Feature disable options
* These options are also useful to firmware size reduction.
@@ -116,7 +54,3 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
//#define NO_ACTION_LAYER
//#define NO_ACTION_TAPPING
//#define NO_ACTION_ONESHOT
-
-/* Bootmagic Lite key configuration */
-// #define BOOTMAGIC_LITE_ROW 0
-// #define BOOTMAGIC_LITE_COLUMN 0
diff --git a/keyboards/kkatano/bakeneko80/info.json b/keyboards/kkatano/bakeneko80/info.json
index 8516779a8c..8cb125d309 100644
--- a/keyboards/kkatano/bakeneko80/info.json
+++ b/keyboards/kkatano/bakeneko80/info.json
@@ -8,6 +8,9 @@
"pid": "0x8DEF",
"device_version": "0.0.1"
},
+ "processor": "atmega32u4",
+ "bootloader": "atmel-dfu",
+ "community_layouts": ["tkl_ansi"],
"layouts": {
"LAYOUT_tkl_ansi": {
"layout": [{"label":"1", "x":0, "y":0}, {"label":"2", "x":2, "y":0}, {"label":"3", "x":3, "y":0}, {"label":"4", "x":4, "y":0}, {"label":"5", "x":5, "y":0}, {"label":"6", "x":6.5, "y":0}, {"label":"7", "x":7.5, "y":0}, {"label":"8", "x":8.5, "y":0}, {"label":"9", "x":9.5, "y":0}, {"label":"10", "x":11, "y":0}, {"label":"11", "x":12, "y":0}, {"label":"12", "x":13, "y":0}, {"label":"13", "x":14, "y":0}, {"label":"14", "x":15.25, "y":0}, {"label":"15", "x":16.25, "y":0}, {"label":"16", "x":17.25, "y":0}, {"label":"17", "x":0, "y":1.25}, {"label":"18", "x":1, "y":1.25}, {"label":"19", "x":2, "y":1.25}, {"label":"20", "x":3, "y":1.25}, {"label":"21", "x":4, "y":1.25}, {"label":"22", "x":5, "y":1.25}, {"label":"23", "x":6, "y":1.25}, {"label":"24", "x":7, "y":1.25}, {"label":"25", "x":8, "y":1.25}, {"label":"26", "x":9, "y":1.25}, {"label":"27", "x":10, "y":1.25}, {"label":"28", "x":11, "y":1.25}, {"label":"29", "x":12, "y":1.25}, {"label":"30", "x":13, "y":1.25, "w":2}, {"label":"31", "x":15.25, "y":1.25}, {"label":"32", "x":16.25, "y":1.25}, {"label":"33", "x":17.25, "y":1.25}, {"label":"34", "x":0, "y":2.25, "w":1.5}, {"label":"35", "x":1.5, "y":2.25}, {"label":"36", "x":2.5, "y":2.25}, {"label":"37", "x":3.5, "y":2.25}, {"label":"38", "x":4.5, "y":2.25}, {"label":"39", "x":5.5, "y":2.25}, {"label":"40", "x":6.5, "y":2.25}, {"label":"41", "x":7.5, "y":2.25}, {"label":"42", "x":8.5, "y":2.25}, {"label":"43", "x":9.5, "y":2.25}, {"label":"44", "x":10.5, "y":2.25}, {"label":"45", "x":11.5, "y":2.25}, {"label":"46", "x":12.5, "y":2.25}, {"label":"47", "x":13.5, "y":2.25, "w":1.5}, {"label":"48", "x":15.25, "y":2.25}, {"label":"49", "x":16.25, "y":2.25}, {"label":"50", "x":17.25, "y":2.25}, {"label":"51", "x":0, "y":3.25, "w":1.75}, {"label":"52", "x":1.75, "y":3.25}, {"label":"53", "x":2.75, "y":3.25}, {"label":"54", "x":3.75, "y":3.25}, {"label":"55", "x":4.75, "y":3.25}, {"label":"56", "x":5.75, "y":3.25}, {"label":"57", "x":6.75, "y":3.25}, {"label":"58", "x":7.75, "y":3.25}, {"label":"59", "x":8.75, "y":3.25}, {"label":"60", "x":9.75, "y":3.25}, {"label":"61", "x":10.75, "y":3.25}, {"label":"62", "x":11.75, "y":3.25}, {"label":"63", "x":12.75, "y":3.25, "w":2.25}, {"label":"64", "x":0, "y":4.25, "w":2.25}, {"label":"65", "x":2.25, "y":4.25}, {"label":"66", "x":3.25, "y":4.25}, {"label":"67", "x":4.25, "y":4.25}, {"label":"68", "x":5.25, "y":4.25}, {"label":"69", "x":6.25, "y":4.25}, {"label":"70", "x":7.25, "y":4.25}, {"label":"71", "x":8.25, "y":4.25}, {"label":"72", "x":9.25, "y":4.25}, {"label":"73", "x":10.25, "y":4.25}, {"label":"74", "x":11.25, "y":4.25}, {"label":"75", "x":12.25, "y":4.25, "w":2.75}, {"label":"76", "x":16.25, "y":4.25}, {"label":"77", "x":0, "y":5.25, "w":1.25}, {"label":"78", "x":1.25, "y":5.25, "w":1.25}, {"label":"79", "x":2.5, "y":5.25, "w":1.25}, {"label":"80", "x":3.75, "y":5.25, "w":6.25}, {"label":"81", "x":10, "y":5.25, "w":1.25}, {"label":"82", "x":11.25, "y":5.25, "w":1.25}, {"label":"83", "x":12.5, "y":5.25, "w":1.25}, {"label":"84", "x":13.75, "y":5.25, "w":1.25}, {"label":"85", "x":15.25, "y":5.25}, {"label":"86", "x":16.25, "y":5.25}, {"label":"87", "x":17.25, "y":5.25}]
diff --git a/keyboards/kkatano/bakeneko80/rules.mk b/keyboards/kkatano/bakeneko80/rules.mk
index 2661317d2a..fce764c22d 100644
--- a/keyboards/kkatano/bakeneko80/rules.mk
+++ b/keyboards/kkatano/bakeneko80/rules.mk
@@ -1,9 +1,3 @@
-# MCU name
-MCU = atmega32u4
-
-# Bootloader selection
-BOOTLOADER = atmel-dfu
-
# Build Options
# change yes to no to disable
#
@@ -16,5 +10,3 @@ NKRO_ENABLE = no # Enable N-Key Rollover
BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality
RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow
AUDIO_ENABLE = no # Audio output
-
-LAYOUTS = tkl_ansi
diff --git a/keyboards/kkatano/wallaby/config.h b/keyboards/kkatano/wallaby/config.h
index 784d867247..aecfcb1c13 100644
--- a/keyboards/kkatano/wallaby/config.h
+++ b/keyboards/kkatano/wallaby/config.h
@@ -17,11 +17,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
#pragma once
-#include "config_common.h"
-
-/* key matrix size */
-#define MATRIX_ROWS 6
-#define MATRIX_COLS 17
/*
* Keyboard Matrix Assignments
@@ -39,68 +34,11 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
/* COL2ROW, ROW2COL*/
#define DIODE_DIRECTION COL2ROW
-/*
- * Split Keyboard specific options, make sure you have 'SPLIT_KEYBOARD = yes' in your rules.mk, and define SOFT_SERIAL_PIN.
- */
-// #define SOFT_SERIAL_PIN D0 // or D1, D2, D3, E6
-
-// #define BACKLIGHT_PIN B7
-// #define BACKLIGHT_BREATHING
-// #define BACKLIGHT_LEVELS 3
-
-// #define RGB_DI_PIN E2
-// #ifdef RGB_DI_PIN
-// #define RGBLED_NUM 16
-// #define RGBLIGHT_HUE_STEP 8
-// #define RGBLIGHT_SAT_STEP 8
-// #define RGBLIGHT_VAL_STEP 8
-// #define RGBLIGHT_LIMIT_VAL 255 /* The maximum brightness level */
-// #define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */
-// /*== customize breathing effect ==*/
-// /*==== (DEFAULT) use fixed table instead of exp() and sin() ====*/
-// #define RGBLIGHT_BREATHE_TABLE_SIZE 256 // 256(default) or 128 or 64
-// /*==== use exp() and sin() ====*/
-// #define RGBLIGHT_EFFECT_BREATHE_CENTER 1.85 // 1 to 2.7
-// #define RGBLIGHT_EFFECT_BREATHE_MAX 255 // 0 to 255
-// #endif
-
-/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
-#define DEBOUNCE 5
-
-/* define if matrix has ghost (lacks anti-ghosting diodes) */
-//#define MATRIX_HAS_GHOST
-
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
#define LOCKING_SUPPORT_ENABLE
/* Locking resynchronize hack */
#define LOCKING_RESYNC_ENABLE
-/* If defined, GRAVE_ESC will always act as ESC when CTRL is held.
- * This is userful for the Windows task manager shortcut (ctrl+shift+esc).
- */
-// #define GRAVE_ESC_CTRL_OVERRIDE
-
-/*
- * Force NKRO
- *
- * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
- * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
- * makefile for this to work.)
- *
- * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
- * until the next keyboard reset.
- *
- * NKRO may prevent your keystrokes from being detected in the BIOS, but it is
- * fully operational during normal computer usage.
- *
- * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
- * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
- * bootmagic, NKRO mode will always be enabled until it is toggled again during a
- * power-up.
- *
- */
-//#define FORCE_NKRO
-
/*
* Feature disable options
* These options are also useful to firmware size reduction.
@@ -116,7 +54,3 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
//#define NO_ACTION_LAYER
//#define NO_ACTION_TAPPING
//#define NO_ACTION_ONESHOT
-
-/* Bootmagic Lite key configuration */
-// #define BOOTMAGIC_LITE_ROW 0
-// #define BOOTMAGIC_LITE_COLUMN 0
diff --git a/keyboards/kkatano/wallaby/info.json b/keyboards/kkatano/wallaby/info.json
index 3867a7cbf9..b5ee4bd1ed 100644
--- a/keyboards/kkatano/wallaby/info.json
+++ b/keyboards/kkatano/wallaby/info.json
@@ -8,6 +8,9 @@
"pid": "0x5967",
"device_version": "0.0.1"
},
+ "processor": "atmega32u4",
+ "bootloader": "atmel-dfu",
+ "community_layouts": ["tkl_ansi"],
"layouts": {
"LAYOUT_tkl_ansi": {
"layout": [
diff --git a/keyboards/kkatano/wallaby/rules.mk b/keyboards/kkatano/wallaby/rules.mk
index 2661317d2a..fce764c22d 100644
--- a/keyboards/kkatano/wallaby/rules.mk
+++ b/keyboards/kkatano/wallaby/rules.mk
@@ -1,9 +1,3 @@
-# MCU name
-MCU = atmega32u4
-
-# Bootloader selection
-BOOTLOADER = atmel-dfu
-
# Build Options
# change yes to no to disable
#
@@ -16,5 +10,3 @@ NKRO_ENABLE = no # Enable N-Key Rollover
BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality
RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow
AUDIO_ENABLE = no # Audio output
-
-LAYOUTS = tkl_ansi
diff --git a/keyboards/kkatano/yurei/config.h b/keyboards/kkatano/yurei/config.h
index 6a13affb21..cd117f9c57 100644
--- a/keyboards/kkatano/yurei/config.h
+++ b/keyboards/kkatano/yurei/config.h
@@ -17,11 +17,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
#pragma once
-#include "config_common.h"
-
-/* key matrix size */
-#define MATRIX_ROWS 6
-#define MATRIX_COLS 17
/*
* Keyboard Matrix Assignments
@@ -39,68 +34,11 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
/* COL2ROW, ROW2COL*/
#define DIODE_DIRECTION COL2ROW
-/*
- * Split Keyboard specific options, make sure you have 'SPLIT_KEYBOARD = yes' in your rules.mk, and define SOFT_SERIAL_PIN.
- */
-// #define SOFT_SERIAL_PIN D0 // or D1, D2, D3, E6
-
-// #define BACKLIGHT_PIN B7
-// #define BACKLIGHT_BREATHING
-// #define BACKLIGHT_LEVELS 3
-
-// #define RGB_DI_PIN E2
-// #ifdef RGB_DI_PIN
-// #define RGBLED_NUM 16
-// #define RGBLIGHT_HUE_STEP 8
-// #define RGBLIGHT_SAT_STEP 8
-// #define RGBLIGHT_VAL_STEP 8
-// #define RGBLIGHT_LIMIT_VAL 255 /* The maximum brightness level */
-// #define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */
-// /*== customize breathing effect ==*/
-// /*==== (DEFAULT) use fixed table instead of exp() and sin() ====*/
-// #define RGBLIGHT_BREATHE_TABLE_SIZE 256 // 256(default) or 128 or 64
-// /*==== use exp() and sin() ====*/
-// #define RGBLIGHT_EFFECT_BREATHE_CENTER 1.85 // 1 to 2.7
-// #define RGBLIGHT_EFFECT_BREATHE_MAX 255 // 0 to 255
-// #endif
-
-/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
-#define DEBOUNCE 5
-
-/* define if matrix has ghost (lacks anti-ghosting diodes) */
-//#define MATRIX_HAS_GHOST
-
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
#define LOCKING_SUPPORT_ENABLE
/* Locking resynchronize hack */
#define LOCKING_RESYNC_ENABLE
-/* If defined, GRAVE_ESC will always act as ESC when CTRL is held.
- * This is userful for the Windows task manager shortcut (ctrl+shift+esc).
- */
-// #define GRAVE_ESC_CTRL_OVERRIDE
-
-/*
- * Force NKRO
- *
- * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
- * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
- * makefile for this to work.)
- *
- * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
- * until the next keyboard reset.
- *
- * NKRO may prevent your keystrokes from being detected in the BIOS, but it is
- * fully operational during normal computer usage.
- *
- * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
- * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
- * bootmagic, NKRO mode will always be enabled until it is toggled again during a
- * power-up.
- *
- */
-//#define FORCE_NKRO
-
/*
* Feature disable options
* These options are also useful to firmware size reduction.
@@ -116,7 +54,3 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
//#define NO_ACTION_LAYER
//#define NO_ACTION_TAPPING
//#define NO_ACTION_ONESHOT
-
-/* Bootmagic Lite key configuration */
-// #define BOOTMAGIC_LITE_ROW 0
-// #define BOOTMAGIC_LITE_COLUMN 0
diff --git a/keyboards/kkatano/yurei/info.json b/keyboards/kkatano/yurei/info.json
index 67c7669cd5..b1efc63581 100644
--- a/keyboards/kkatano/yurei/info.json
+++ b/keyboards/kkatano/yurei/info.json
@@ -8,6 +8,9 @@
"pid": "0x5D5E",
"device_version": "0.0.1"
},
+ "processor": "atmega32u4",
+ "bootloader": "halfkay",
+ "community_layouts": ["tkl_ansi"],
"layouts": {
"LAYOUT_tkl_ansi": {
"layout": [
diff --git a/keyboards/kkatano/yurei/rules.mk b/keyboards/kkatano/yurei/rules.mk
index 9d8bcfa6fb..fce764c22d 100644
--- a/keyboards/kkatano/yurei/rules.mk
+++ b/keyboards/kkatano/yurei/rules.mk
@@ -1,9 +1,3 @@
-# MCU name
-MCU = atmega32u4
-
-# Bootloader selection
-BOOTLOADER = halfkay
-
# Build Options
# change yes to no to disable
#
@@ -16,5 +10,3 @@ NKRO_ENABLE = no # Enable N-Key Rollover
BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality
RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow
AUDIO_ENABLE = no # Audio output
-
-LAYOUTS = tkl_ansi