summaryrefslogtreecommitdiff
path: root/keyboards/keycapsss/kimiko/keymaps/oriaj3/config.h
diff options
context:
space:
mode:
Diffstat (limited to 'keyboards/keycapsss/kimiko/keymaps/oriaj3/config.h')
-rw-r--r--keyboards/keycapsss/kimiko/keymaps/oriaj3/config.h75
1 files changed, 75 insertions, 0 deletions
diff --git a/keyboards/keycapsss/kimiko/keymaps/oriaj3/config.h b/keyboards/keycapsss/kimiko/keymaps/oriaj3/config.h
new file mode 100644
index 0000000000..5e91a21c73
--- /dev/null
+++ b/keyboards/keycapsss/kimiko/keymaps/oriaj3/config.h
@@ -0,0 +1,75 @@
+/* Copyright 2019 MechMerlin
+ * Copyright 2020 @ben_roe (keycapsss.com)
+ * Copyright 2022 @oriaj3
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#pragma once
+
+/* Select hand configuration */
+#define MASTER_LEFT
+// #define MASTER_RIGHT
+// #define EE_HANDS
+
+#define OLED_FONT_H "keyboards/keycapsss/kimiko/keymaps/rgb_matrix/glcdfont.c"
+// #define OLED_FONT_WIDTH 5
+// #define OLED_FONT_HEIGHT 7
+
+
+#ifdef RGB_MATRIX_ENABLE
+
+// The pin connected to the data pin of the LEDs
+#define RGB_DI_PIN D3
+// The number of LEDs connected
+#define DRIVER_LED_TOTAL 60
+#define RGBLED_NUM 60
+#define RGB_MATRIX_SPLIT {30,30}
+#define SPLIT_LAYER_STATE_ENABLE
+#define SPLIT_TRANSPORT_MIRROR
+
+
+# define RGB_MATRIX_KEYPRESSES // reacts to keypresses
+// # define RGB_MATRIX_KEYRELEASES // reacts to keyreleases (instead of keypresses)
+// # define RGB_DISABLE_AFTER_TIMEOUT 0 // number of ticks to wait until disabling effects
+# define RGB_DISABLE_WHEN_USB_SUSPENDED // turn off effects when suspended
+# define RGB_MATRIX_FRAMEBUFFER_EFFECTS
+// # define RGB_MATRIX_LED_PROCESS_LIMIT (DRIVER_LED_TOTAL + 4) / 5 // limits the number of LEDs to process in an animation per task run (increases keyboard responsiveness)
+// # define RGB_MATRIX_LED_FLUSH_LIMIT 16 // limits in milliseconds how frequently an animation will update the LEDs. 16 (16ms) is equivalent to limiting to 60fps (increases keyboard responsiveness)
+# define RGB_MATRIX_MAXIMUM_BRIGHTNESS 80 // limits maximum brightness of LEDs to 80 out of 255. Higher may cause the controller to crash.
+# define RGB_MATRIX_HUE_STEP 8
+# define RGB_MATRIX_SAT_STEP 8
+# define RGB_MATRIX_VAL_STEP 8
+# define RGB_MATRIX_SPD_STEP 10
+
+
+
+// ENABLES EFFECTS. See alls the effects -> https://github.com/samhocevar-forks/qmk-firmware/blob/master/docs/feature_rgb_matrix.md#rgb-matrix-effects
+# define RGB_MATRIX_TYPING_HEATMAP_DECREASE_DELAY_MS 50
+# define ENABLE_RGB_MATRIX_BAND_SPLIT
+# define ENABLE_RGB_MATRIX_CYCLE_UP_DOWN
+# define ENABLE_RGB_MATRIX_TYPING_HEATMAP
+# define ENABLE_RGB_MATRIX_DIGITAL_RAIN
+# define ENABLE_RGB_MATRIX_SOLID_REACTIVE_WIDE
+//# define ENABLE_RGB_MATRIX_SOLID_REACTIVE_MULTIWIDE
+//# define ENABLE_RGB_MATRIX_SOLID_REACTIVE_MULTICROSS
+//# define ENABLE_RGB_MATRIX_SOLID_REACTIVE_MULTINEXUS
+//# define ENABLE_RGB_MATRIX_MULTISPLASH
+//# define ENABLE_RGB_MATRIX_SOLID_MULTISPLASH
+# define ENABLE_RGB_MATRIX_SPLASH
+#endif
+
+// If you are using an Elite C rev3 on the slave side, uncomment the lines below:
+// #define SPLIT_USB_DETECT
+// #define NO_USB_STARTUP_CHECK