diff options
Diffstat (limited to 'keyboards/jpe230/big_knob/readme.md')
-rw-r--r-- | keyboards/jpe230/big_knob/readme.md | 43 |
1 files changed, 43 insertions, 0 deletions
diff --git a/keyboards/jpe230/big_knob/readme.md b/keyboards/jpe230/big_knob/readme.md new file mode 100644 index 0000000000..f7b6052127 --- /dev/null +++ b/keyboards/jpe230/big_knob/readme.md @@ -0,0 +1,43 @@ +# Big Knob + +![big_knob](https://i.imgur.com/KLS0O7Zh.png) + +A 3D printed single encoder volume knob with a SPI Screen. + +* Keyboard Maintainer: [jpe230](https://github.com/jpe230) +* Hardware Supported: Big Knob PCB, Sparkfun ProMicro RP2040 (*See notes*) +* Hardware Availability: <https://github.com/Jpe230/big_knob> +## Features + +The Big Knob was designed to be easy to assemble: +* Designed to be used with a RP2040 board (*See notes*) +* ST7735 0.96 inch color display +* RGBLight +* Easy to 3D print + +### Notes +You can use any compatible RP2040 board (I.E.: KB2040, Elite Pi, etc), but you will need to modify the pin definition to match you board + +## Flashing + +Make example for this keyboard (after setting up your build environment): + + qmk compile -kb jpe230/big_knob -km default + +Flashing example for this keyboard: + + qmk flash -kb jpe230/big_knob -km default + +See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). + +## Building Instructions + +You can find the required materials and the instructions to build your own Big Knob in the [project repo](https://github.com/Jpe230/big_knob) + +## Bootloader + +Enter the bootloader in 3 ways: + +* **Bootmagic reset**: Hold down the encoder buitton and plug in the keyboard +* **Physical reset button**: Briefly press the reset button on the front of the RP2040 board +* **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available |