summaryrefslogtreecommitdiff
path: root/keyboards/idb_60
diff options
context:
space:
mode:
Diffstat (limited to 'keyboards/idb_60')
-rw-r--r--keyboards/idb_60/config.h12
-rw-r--r--keyboards/idb_60/rules.mk54
2 files changed, 15 insertions, 51 deletions
diff --git a/keyboards/idb_60/config.h b/keyboards/idb_60/config.h
index b85eb14af9..0120e470e5 100644
--- a/keyboards/idb_60/config.h
+++ b/keyboards/idb_60/config.h
@@ -155,16 +155,16 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
// TODO: refactor with new user EEPROM code (coming soon)
#define EEPROM_MAGIC 0x451F
-#define EEPROM_MAGIC_ADDR 32
+#define EEPROM_MAGIC_ADDR 34
// Bump this every time we change what we store
// This will automatically reset the EEPROM with defaults
// and avoid loading invalid data from the EEPROM
#define EEPROM_VERSION 0x08
-#define EEPROM_VERSION_ADDR 34
+#define EEPROM_VERSION_ADDR 36
// Dynamic keymap starts after EEPROM version
-#define DYNAMIC_KEYMAP_EEPROM_ADDR 35
-// Dynamic macro starts after dynamic keymaps (35+(4*10*6*2)) = (35+480)
-#define DYNAMIC_KEYMAP_MACRO_EEPROM_ADDR 675 // **** CHANGE THIS BASED ON MATRIX_ROWS & MATRIX_COLS ****
-#define DYNAMIC_KEYMAP_MACRO_EEPROM_SIZE 349 // **** CHANGE THIS BASED ON 1024-DYNAMIC_KEYMAP_MACRO_EEPROM_ADDR ****
+#define DYNAMIC_KEYMAP_EEPROM_ADDR 37
+// Dynamic macro starts after dynamic keymaps (37+(4*10*6*2)) = (37+480)
+#define DYNAMIC_KEYMAP_MACRO_EEPROM_ADDR 677 // **** CHANGE THIS BASED ON MATRIX_ROWS & MATRIX_COLS ****
+#define DYNAMIC_KEYMAP_MACRO_EEPROM_SIZE 347 // **** CHANGE THIS BASED ON 1024-DYNAMIC_KEYMAP_MACRO_EEPROM_ADDR ****
#define DYNAMIC_KEYMAP_MACRO_COUNT 16
diff --git a/keyboards/idb_60/rules.mk b/keyboards/idb_60/rules.mk
index b5c9413470..b57f12db6a 100644
--- a/keyboards/idb_60/rules.mk
+++ b/keyboards/idb_60/rules.mk
@@ -1,52 +1,16 @@
# MCU name
MCU = atmega32u2
-# Processor frequency.
-# This will define a symbol, F_CPU, in all source code files equal to the
-# processor frequency in Hz. You can then use this symbol in your source code to
-# calculate timings. Do NOT tack on a 'UL' at the end, this will be done
-# automatically to create a 32-bit value in your source code.
-#
-# This will be an integer division of F_USB below, as it is sourced by
-# F_USB after it has run through any CPU prescalers. Note that this value
-# does not *change* the processor frequency - it should merely be updated to
-# reflect the processor speed set externally so that the code can use accurate
-# software delays.
-F_CPU = 16000000
-
-
-#
-# LUFA specific
-#
-# Target architecture (see library "Board Types" documentation).
-ARCH = AVR8
-
-# Input clock frequency.
-# This will define a symbol, F_USB, in all source code files equal to the
-# input clock frequency (before any prescaling is performed) in Hz. This value may
-# differ from F_CPU if prescaling is used on the latter, and is required as the
-# raw input clock is fed directly to the PLL sections of the AVR for high speed
-# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
-# at the end, this will be done automatically to create a 32-bit value in your
-# source code.
-#
-# If no clock division is performed on the input clock inside the AVR (via the
-# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
-F_USB = $(F_CPU)
-
-# Interrupt driven control endpoint task(+60)
-OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
-
-
-# Boot Section Size in *bytes*
-# Teensy halfKay 512
-# Teensy++ halfKay 1024
-# Atmel DFU loader 4096
-# LUFA bootloader 4096
-# USBaspLoader 2048
+# Bootloader selection
+# Teensy halfkay
+# Pro Micro caterina
+# Atmel DFU atmel-dfu
+# LUFA DFU lufa-dfu
+# QMK DFU qmk-dfu
+# ATmega32A bootloadHID
+# ATmega328P USBasp
BOOTLOADER = atmel-dfu
-
# Build Options
# comment out to disable the options.
#
@@ -62,4 +26,4 @@ NKRO_ENABLE = yes # USB Nkey Rollover - if this doesn't work, see here: https:
# BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality
# MIDI_ENABLE = YES # MIDI controls
# UNICODE_ENABLE = YES # Unicode
-# BLUETOOTH_ENABLE = yes # Enable Bluetooth with the Adafruit EZ-Key HID \ No newline at end of file
+# BLUETOOTH_ENABLE = yes # Enable Bluetooth with the Adafruit EZ-Key HID