diff options
Diffstat (limited to 'keyboards/hhkb/keymaps/blakedietz/README.md')
| -rw-r--r-- | keyboards/hhkb/keymaps/blakedietz/README.md | 134 |
1 files changed, 0 insertions, 134 deletions
diff --git a/keyboards/hhkb/keymaps/blakedietz/README.md b/keyboards/hhkb/keymaps/blakedietz/README.md deleted file mode 100644 index 4dff47a6e8..0000000000 --- a/keyboards/hhkb/keymaps/blakedietz/README.md +++ /dev/null @@ -1,134 +0,0 @@ -# QMK HHKB Keymap: blakedietz - -<!-- TODO: Link to Hasu's geekhack page from his name --> -<!-- TODO: Link to the ergodox ez layout in this repository --> - -This is my (Blake Dietz's) own take on a QMK keymap for the Happy Hacking Keyboard Pro 2 alternate controller made by Hasu. A lot of the - functionality was inspired by the ergodox ez default layout. - -## Dependencies - -### macOS - -```bash -brew tap osx-cross/avr -brew install avr-libc -brew install dfu-programmer -``` - -### Windows/Linux - -[Build Environment Setup](https://github.com/jackhumbert/qmk_firmware/wiki#build-environment-setup) - -## Flashing - -You will need to make sure that you have something that you can use to press the button on the alternate controller in -order to put it into boot mode. - -From the hhkb directory run the following: - -```bash -make clean -make hhkb:blakedietz:dfu -``` - -Press the button on the alternate controller to put the board into boot mode. - -You'll see an output similar to the following: - -```bash -make hhkb:blakedietz:dfu - -Making hhkb with keymap blakedietz and target dfu - -avr-gcc (GCC) 6.2.0 -Copyright (C) 2016 Free Software Foundation, Inc. -This is free software; see the source for copying conditions. There is NO -warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. - -Size before: - text data bss dec hex filename - 0 22162 0 22162 5692 hhkb_blakedietz.hex - -Compiling: keyboards/hhkb/keymaps/blakedietz/keymap.c [OK] -Compiling: ./tmk_core/common/command.c [OK] -Linking: .build/hhkb_blakedietz.elf [OK] -Creating load file for Flash: .build/hhkb_blakedietz.hex [OK] - -Size after: - text data bss dec hex filename - 0 22162 0 22162 5692 hhkb_blakedietz.hex - -dfu-programmer: no device present. -Error: Bootloader not found. Trying again in 5s. -dfu-programmer: no device present. -Error: Bootloader not found. Trying again in 5s. -Bootloader Version: 0x00 (0) -Erasing flash... Success -Checking memory from 0x0 to 0x6FFF... Empty. -Checking memory from 0x0 to 0x56FF... Empty. -0% 100% Programming 0x5700 bytes... -[>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>] Success -0% 100% Reading 0x7000 bytes... -[>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>] Success -Validating... Success -0x5700 bytes written into 0x7000 bytes memory (77.68%). -``` - -### Layers - -#### Default - -##### A more "standard" layout - -This layout places tilde in the standard location. Backspace is moved to the two upper-right-most keys and pipe -is put back where it belongs (where backspace is on the default hhkb2 keymapping). - -##### Hyper key - -<!-- TODO: Link to Brett's article about the thyper key --> - -This layout throws out the HHKB's control key in favor of a Hyper key. Ctrl is instead placed on the z and / keys and -can be activated with a long press. I find that this is far more ergonomic as it's less of a reach and it allows you to -alternate to either hand when you need to use `ctrl` as a modifier. - -The hyper key can be held for hyper and tapped for escape. You'll find that this is quite nice for vim. - -Enter is also a hyper key. This allows for symmetry between control and enter. Hold for hyper, tap for enter. - -##### Tap to Hold - -###### CTL, ALT, GUI - -Since the HHKB does not have three super/meta keys, these keys were moved to pinky, ring and middle finger for ctrl, alt/ - option and super respectively. This is closer to home row which I've found causes less strain. - -The Alt and Super keys are instead replaced with layer toggle keys to go to dev and mouse mode respectively. - -###### Space - -Hold space to switch to dev mode. This will put you on a layer to have vim like arrow functionality on h,j,k and l. Use -this in editors that don't have vim keybindings. - -### Dev - -The Dev layer can be activated holding space or hitting the HHKB's Alt key. This will put you in a mode -where all function keys are available and left, right, up and down are mapped to their vim equivalents. The function - keys are mapped in such a way that you can use them for debugging. Typically I map debugging functions in all IDEs to - the following for a seamless debugging experience (e.g. jumping from Intellij to chrome dev tools and back): - - - f1 -> step over - - f2 -> step into - - f3 -> step out - - f4 -> continue - - f5 -> set break point on current line - -### Media - -The media layer can be activated by pressing and holding the semi-colon. I've also placed the play and pause key on the -apostrophe key in the media layer. This allows you to easily roll your pinky from the media toggle (semi-colon) to the -play/pause key in one fluid motion. - -I've also tried to logically map next/previous track along with volume up/down vim behavior. In vim since middle finger -goes up on k and index finger goes down on j, next/prev track is k/j respectively. ,/m changes volume up/down -respectively while toggled to the media layer. |