diff options
Diffstat (limited to 'keyboards/handwired/tractyl_manuform/5x6_right/f411')
3 files changed, 21 insertions, 7 deletions
diff --git a/keyboards/handwired/tractyl_manuform/5x6_right/f411/config.h b/keyboards/handwired/tractyl_manuform/5x6_right/f411/config.h index 172ccf7bc2..4dbe03acbf 100644 --- a/keyboards/handwired/tractyl_manuform/5x6_right/f411/config.h +++ b/keyboards/handwired/tractyl_manuform/5x6_right/f411/config.h @@ -44,11 +44,11 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #define WS2812_DMA_STREAM STM32_DMA1_STREAM7 // DMA Stream for TIMx_UP, see the respective reference manual for the appropriate values for your MCU. #define WS2812_DMA_CHANNEL 3 // DMA Channel for TIMx_UP, see the respective reference manual for the appropriate values for your MCU. -#define RGBLED_NUM 20 +#define RGBLED_NUM 52 #define RGBLIGHT_SPLIT #define RGBLED_SPLIT \ - { 10, 10 } -#define RGBLIGHT_LMIT_VAL 80 + { 26, 26 } +#define RGBLIGHT_LIMIT_VAL 150 #define DEBUG_LED_PIN C13 diff --git a/keyboards/handwired/tractyl_manuform/5x6_right/f411/readme.md b/keyboards/handwired/tractyl_manuform/5x6_right/f411/readme.md index 5fb2c0fc72..b387435122 100644 --- a/keyboards/handwired/tractyl_manuform/5x6_right/f411/readme.md +++ b/keyboards/handwired/tractyl_manuform/5x6_right/f411/readme.md @@ -1,16 +1,21 @@ # Drashna's Blackpill Tractyl Manuform (5x6) with a right side trackball -* VBUS mod, using PB10 +* System Timer on TIM5 +* ~~VBUS mod, using PB10~~ (*doesn't seem to work for me*) * Split Hand Pin, using PC14 -* Full Duplex Serial/USART using PA3 and PA4 on USART2 +* Full Duplex Serial/USART using PA2 and PA3 on USART2 * PWM Audio using PB1 and TIM3 and GPT on TIM4 -* PWM RGB using PA1 TIM2 -* pmw3360 sensor sharing PA5-PA7 on SPI1, with B0 as CS pin +* PWM WS2812 RGB using PA1 TIM2 * 8KB SPI EEPROM chip sharing PA5-PA7 on SPI1 with PA4 as CS pin +* pmw3360 sensor sharing PA5-PA7 on SPI1, with B0 as CS pin * Encoder using PA13 and PA14 * SSD1306 OLED display (128x64) using PB8-PB9 on I2C1 * Pull-up resistor (22k) on PA10 to fix reset issue. * Pull-up resistor (5.1k) on PA1 for WS2812 LED support, and wire it's VCC to the 5V pin. +* Pins PA9, PA11, A12 are not useable because they're used for USB connection, and can't be shared. +* Pin PB2 is used by BOOT1, and is unusable + +## Keyboard Info * Keyboard Maintainer: [Drashna Jael're](https://github.com/drashna) * Hardware Supported: [Design files](https://gitlab.com/keyboards1/dm_r_track/-/tree/master/boolean), [WeAct BlackPill (F411)](https://github.com/WeActTC/MiniSTM32F4x1), [PMW3360 Optical Sensor](https://www.tindie.com/products/jkicklighter/pmw3360-motion-sensor/) @@ -24,3 +29,9 @@ Flashing example for this keyboard: make handwired/tractyl_manuform/5x6_right/f411:default:flash See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). + +## Bootloader + +* **Bootmagic reset**: Hold down the top right key on the right side, or the top left key on the left side while plugging in. +* **Physical reset button**: Briefly press the "USER" button on the BlackPill +* **Keycode in layout**: Press the key mapped to `RESET`. diff --git a/keyboards/handwired/tractyl_manuform/5x6_right/f411/rules.mk b/keyboards/handwired/tractyl_manuform/5x6_right/f411/rules.mk index ede1a6baff..d6f972b468 100644 --- a/keyboards/handwired/tractyl_manuform/5x6_right/f411/rules.mk +++ b/keyboards/handwired/tractyl_manuform/5x6_right/f411/rules.mk @@ -6,8 +6,11 @@ BOOTLOADER = stm32-dfu KEYBOARD_SHARED_EP = yes CONSOLE_ENABLE = yes +MOUSE_SHARED_EP = no EEPROM_DRIVER = spi WS2812_DRIVER = pwm SERIAL_DRIVER = usart AUDIO_DRIVER = pwm_hardware + +DEBOUNCE_TYPE = asym_eager_defer_pk |