diff options
Diffstat (limited to 'keyboards/handwired/tractyl_manuform/5x6_right/f411')
| -rw-r--r-- | keyboards/handwired/tractyl_manuform/5x6_right/f411/config.h | 3 | ||||
| -rw-r--r-- | keyboards/handwired/tractyl_manuform/5x6_right/f411/readme.md | 3 |
2 files changed, 4 insertions, 2 deletions
diff --git a/keyboards/handwired/tractyl_manuform/5x6_right/f411/config.h b/keyboards/handwired/tractyl_manuform/5x6_right/f411/config.h index b2a240f9ff..172ccf7bc2 100644 --- a/keyboards/handwired/tractyl_manuform/5x6_right/f411/config.h +++ b/keyboards/handwired/tractyl_manuform/5x6_right/f411/config.h @@ -39,6 +39,7 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #define WS2812_PWM_DRIVER PWMD2 // default: PWMD2 #define WS2812_PWM_CHANNEL 2 // default: 2 #define WS2812_PWM_PAL_MODE 1 // Pin "alternate function", see the respective datasheet for the appropriate values for your MCU. default: 2 +#define WS2812_EXTERNAL_PULLUP //#define WS2812_PWM_COMPLEMENTARY_OUTPUT // Define for a complementary timer output (TIMx_CHyN); omit for a normal timer output (TIMx_CHy). #define WS2812_DMA_STREAM STM32_DMA1_STREAM7 // DMA Stream for TIMx_UP, see the respective reference manual for the appropriate values for your MCU. #define WS2812_DMA_CHANNEL 3 // DMA Channel for TIMx_UP, see the respective reference manual for the appropriate values for your MCU. @@ -47,7 +48,7 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #define RGBLIGHT_SPLIT #define RGBLED_SPLIT \ { 10, 10 } -#define RGBLIGHT_LIMIT_VAL 80 +#define RGBLIGHT_LMIT_VAL 80 #define DEBUG_LED_PIN C13 diff --git a/keyboards/handwired/tractyl_manuform/5x6_right/f411/readme.md b/keyboards/handwired/tractyl_manuform/5x6_right/f411/readme.md index 6377613814..5fb2c0fc72 100644 --- a/keyboards/handwired/tractyl_manuform/5x6_right/f411/readme.md +++ b/keyboards/handwired/tractyl_manuform/5x6_right/f411/readme.md @@ -9,7 +9,8 @@ * 8KB SPI EEPROM chip sharing PA5-PA7 on SPI1 with PA4 as CS pin * Encoder using PA13 and PA14 * SSD1306 OLED display (128x64) using PB8-PB9 on I2C1 -* Pull-up resistor (22k) on A10 to fix reset issue. +* Pull-up resistor (22k) on PA10 to fix reset issue. +* Pull-up resistor (5.1k) on PA1 for WS2812 LED support, and wire it's VCC to the 5V pin. * Keyboard Maintainer: [Drashna Jael're](https://github.com/drashna) * Hardware Supported: [Design files](https://gitlab.com/keyboards1/dm_r_track/-/tree/master/boolean), [WeAct BlackPill (F411)](https://github.com/WeActTC/MiniSTM32F4x1), [PMW3360 Optical Sensor](https://www.tindie.com/products/jkicklighter/pmw3360-motion-sensor/) |