diff options
Diffstat (limited to 'keyboards/handwired/tractyl_manuform/5x6_right/f411/config.h')
| -rw-r--r-- | keyboards/handwired/tractyl_manuform/5x6_right/f411/config.h | 98 |
1 files changed, 98 insertions, 0 deletions
diff --git a/keyboards/handwired/tractyl_manuform/5x6_right/f411/config.h b/keyboards/handwired/tractyl_manuform/5x6_right/f411/config.h new file mode 100644 index 0000000000..d3e0598cd6 --- /dev/null +++ b/keyboards/handwired/tractyl_manuform/5x6_right/f411/config.h @@ -0,0 +1,98 @@ +/* +Copyright 2012 Jun Wako <wakojun@gmail.com> +Copyright 2015 Jack Humbert + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see <http://www.gnu.org/licenses/>. +*/ + +#pragma once + +#define PRODUCT Tractyl Manuform(5x6) BlackPill + +// wiring of each half +#define MATRIX_COL_PINS \ + { A15, B3, B4, B5, B6, B7 } +#define MATRIX_ROW_PINS \ + { B12, B13, B14, B15, A8, A9 } + +#define DIODE_DIRECTION COL2ROW + +#define USB_VBUS_PIN B10 +#define SPLIT_HAND_PIN C14 // high = left, low = right + +// WS2812 RGB LED strip input and number of LEDs +#define RGB_DI_PIN A1 +#define WS2812_PWM_DRIVER PWMD5 // default: PWMD2 +#define WS2812_PWM_CHANNEL 2 // default: 2 +#define WS2812_PWM_PAL_MODE 2 // Pin "alternate function", see the respective datasheet for the appropriate values for your MCU. default: 2 +//#define WS2812_PWM_COMPLEMENTARY_OUTPUT // Define for a complementary timer output (TIMx_CHyN); omit for a normal timer output (TIMx_CHy). +#define WS2812_DMA_STREAM STM32_DMA1_STREAM0 // DMA Stream for TIMx_UP, see the respective reference manual for the appropriate values for your MCU. +#define WS2812_DMA_CHANNEL 6 // DMA Channel for TIMx_UP, see the respective reference manual for the appropriate values for your MCU. + +#define RGBLED_NUM 20 +#define RGBLIGHT_SPLIT +#define RGBLED_SPLIT \ + { 10, 10 } + +#define DEBUG_LED_PIN C13 + +#define AUDIO_PIN A0 +#define AUDIO_PWM_DRIVER PWMD5 +#define AUDIO_PWM_CHANNEL 1 +#define AUDIO_STATE_TIMER GPTD4 + +/* serial.c configuration for split keyboard */ +#define SERIAL_USART_FULL_DUPLEX // Enable full duplex operation mode. +#define SERIAL_USART_TX_PIN A2 +#define SERIAL_USART_RX_PIN A3 +#define SERIAL_USART_DRIVER SD2 +#define SERIAL_USART_TX_PAL_MODE 7 // Pin "alternate function", see the respective datasheet for the appropriate values for your MCU. default: 7 +#define SERIAL_USART_RX_PAL_MODE 7 // Pin "alternate function", see the respective datasheet for the appropriate values for your MCU. default: 7 +#define SERIAL_USART_TIMEOUT 100 // USART driver timeout. default 100 +#undef SOFT_SERIAL_PIN + +// #define EE_HANDS + +#define I2C_DRIVER I2CD1 +#define I2C1_SCL_BANK GPIOB +#define I2C1_SDA_BANK GPIOB +#define I2C1_SCL 8 +#define I2C1_SDA 9 +#define I2C1_SCL_PAL_MODE 4 +#define I2C1_SDA_PAL_MODE 4 +#define I2C1_CLOCK_SPEED 400000 + +#define ENCODERS_PAD_A \ + { B1 } +#define ENCODERS_PAD_B \ + { B2 } + +#define SPI_DRIVER SPID1 +#define SPI_SCK_PIN A5 +#define SPI_SCK_PAL_MODE 5 +#define SPI_MOSI_PIN A7 +#define SPI_MOSI_PAL_MODE 5 +#define SPI_MISO_PIN A6 +#define SPI_MISO_PAL_MODE 5 + +#define EXTERNAL_EEPROM_SPI_SLAVE_SELECT_PIN A4 +// #define EXTERNAL_EEPROM_SPI_CLOCK_DIVISOR 64 +// #define EXTERNAL_EEPROM_BYTE_COUNT 8196 +// #define EXTERNAL_EEPROM_PAGE_SIZE 32 +// #define EXTERNAL_EEPROM_ADDRESS_SIZE 2 +#define DEBUG_EEPROM_OUTPUT + +#define PMW_CS_PIN B0 +#define SPI_MODE 0 +#define SPI_DIVISOR 64 |