diff options
Diffstat (limited to 'keyboards/handwired/dactyl_manuform')
| -rw-r--r-- | keyboards/handwired/dactyl_manuform/readme.md | 16 |
1 files changed, 4 insertions, 12 deletions
diff --git a/keyboards/handwired/dactyl_manuform/readme.md b/keyboards/handwired/dactyl_manuform/readme.md index 0d08c67a08..3221da0e9d 100644 --- a/keyboards/handwired/dactyl_manuform/readme.md +++ b/keyboards/handwired/dactyl_manuform/readme.md @@ -131,17 +131,9 @@ file will run on both hands instead of having to flash left and right handed versions of the firmware to each half. To flash the EEPROM file for the left half run: ``` -avrdude -p atmega32u4 -P $(COM_PORT) -c avr109 -U eeprom:w:"./quantum/split_common/eeprom-lefthand.eep" -// or the equivalent in dfu-programmer - -``` -and similarly for right half +make handwired/dactyl_promicro:default:dfu-split-left +make handwired/dactyl_promicro:default:dfu-split-right ``` -avrdude -p atmega32u4 -P $(COM_PORT) -c avr109 -U eeprom:w:"./quantum/split_common/eeprom-righthand.eep" -// or the equivalent in dfu-programmer -``` - -NOTE: replace `$(COM_PORT)` with the port of your device (e.g. `/dev/ttyACM0`) After you have flashed the EEPROM, you then need to set `EE_HANDS` in your config.h, rebuild the hex files and reflash. @@ -162,6 +154,6 @@ Also, if the slave board is producing weird characters in certain columns, update the following line in `matrix.c` to the following: ``` -// _delay_us(30); // without this wait read unstable value. -_delay_us(300); // without this wait read unstable value. +// wait_us(30); // without this wait read unstable value. +wait_us(300); // without this wait read unstable value. ``` |