diff options
Diffstat (limited to 'keyboards/gonnerd')
| -rw-r--r-- | keyboards/gonnerd/Makefile | 3 | ||||
| -rw-r--r-- | keyboards/gonnerd/config.h | 43 | ||||
| -rw-r--r-- | keyboards/gonnerd/gonnerd.c | 1 | ||||
| -rw-r--r-- | keyboards/gonnerd/gonnerd.h | 42 | ||||
| -rw-r--r-- | keyboards/gonnerd/keymaps/default/Makefile | 21 | ||||
| -rw-r--r-- | keyboards/gonnerd/keymaps/default/keymap.c | 26 | ||||
| -rw-r--r-- | keyboards/gonnerd/keymaps/mauin/Makefile | 21 | ||||
| -rw-r--r-- | keyboards/gonnerd/keymaps/mauin/keymap.c | 108 | ||||
| -rw-r--r-- | keyboards/gonnerd/keymaps/mauin/readme.md | 5 | ||||
| -rw-r--r-- | keyboards/gonnerd/readme.md | 38 | ||||
| -rw-r--r-- | keyboards/gonnerd/rules.mk | 66 |
11 files changed, 374 insertions, 0 deletions
diff --git a/keyboards/gonnerd/Makefile b/keyboards/gonnerd/Makefile new file mode 100644 index 0000000000..57b2ef62e5 --- /dev/null +++ b/keyboards/gonnerd/Makefile @@ -0,0 +1,3 @@ +ifndef MAKEFILE_INCLUDED + include ../../Makefile +endif diff --git a/keyboards/gonnerd/config.h b/keyboards/gonnerd/config.h new file mode 100644 index 0000000000..cad8fe5861 --- /dev/null +++ b/keyboards/gonnerd/config.h @@ -0,0 +1,43 @@ +#ifndef CONFIG_H +#define CONFIG_H + +#include "config_common.h" + +/* USB Device descriptor parameter */ +#define VENDOR_ID 0xFEED +#define PRODUCT_ID 0x6060 +#define DEVICE_VER 0x0001 +#define MANUFACTURER GON +#define PRODUCT NerD +#define DESCRIPTION QMK port for the GON Nerd PCB + +/* key matrix size */ +#define MATRIX_ROWS 10 +#define MATRIX_COLS 9 + +/* backlight */ +#define BACKLIGHT_PIN B7 +#define BACKLIGHT_LEVELS 3 + +/* matrix pins */ +#define MATRIX_ROW_PINS { B4, E2, F4, F7, F1, F6, C6, F5, D7, C7 } +#define MATRIX_COL_PINS { E6, B0, B1, B2, B3, F0, D0, D5, D1 } +#define UNUSED_PINS + +/* COL2ROW or ROW2COL */ +#define DIODE_DIRECTION COL2ROW + +/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ +#define DEBOUNCING_DELAY 5 + +/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ +#define LOCKING_SUPPORT_ENABLE +/* Locking resynchronize hack */ +#define LOCKING_RESYNC_ENABLE + +/* key combination for magic key command */ +#define IS_COMMAND() ( \ + keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \ +) + +#endif diff --git a/keyboards/gonnerd/gonnerd.c b/keyboards/gonnerd/gonnerd.c new file mode 100644 index 0000000000..f25d3a85f2 --- /dev/null +++ b/keyboards/gonnerd/gonnerd.c @@ -0,0 +1 @@ +#include "gonnerd.h" diff --git a/keyboards/gonnerd/gonnerd.h b/keyboards/gonnerd/gonnerd.h new file mode 100644 index 0000000000..e5070328ed --- /dev/null +++ b/keyboards/gonnerd/gonnerd.h @@ -0,0 +1,42 @@ +#ifndef GONNERD_H +#define GONNERD_H + +#include "quantum.h" + +#define KEYMAP_TKL( \ + K08, K09, K18, K19, K28, K29, K38, K39, K48, K49, K58, K59, K68, K69, K88, K89, \ + K00, K01, K10, K11, K20, K21, K30, K31, K40, K41, K50, K51, K60, K61, K80, K81, K84, \ + K02, K03, K12, K13, K22, K23, K32, K33, K42, K43, K52, K53, K62, K63, K82, K83, K85, \ + K04, K14, K15, K24, K25, K34, K35, K44, K45, K54, K55, K64, K71, K65, \ + K07, K79, K16, K17, K26, K27, K36, K37, K46, K47, K56, K57, K66, K67, K86, \ + K06, K05, K78, K70, K72, K73, K74, K75, K76, K77, K87 \ +) \ +{ \ + { K00, K10, K20, K30, K40, K50, K60, K70, K80 }, \ + { K01, K11, K21, K31, K41, K51, K61, K71, K81 }, \ + { K02, K12, K22, K32, K42, K52, K62, K72, K82 }, \ + { K03, K13, K23, K33, K43, K53, K63, K73, K83 }, \ + { K04, K14, K24, K34, K44, K54, K64, K74, K84 }, \ + { K05, K15, K25, K35, K45, K55, K65, K75, K85 }, \ + { K06, K16, K26, K36, K46, K56, K66, K76, K86 }, \ + { K07, K17, K27, K37, K47, K57, K67, K77, K87 }, \ + { K08, K18, K28, K38, K48, K58, K68, K78, K88 }, \ + { K09, K19, K29, K39, K49, K59, K69, K79, K89 } \ +} + +#define KEYMAP_60( \ + K08, K01, K10, K11, K20, K21, K30, K31, K40, K41, K50, K51, K60, K61, \ + K02, K03, K12, K13, K22, K23, K32, K33, K42, K43, K52, K53, K62, K63, \ + K04, K14, K15, K24, K25, K34, K35, K44, K45, K54, K55, K64, K71, K65, \ + K07, K79, K16, K17, K26, K27, K36, K37, K46, K47, K56, K57, K66, K67, \ + K06, K05, K78, K70, K72, K73, K74, K75 \ +) KEYMAP_TKL( \ + K08, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, \ + KC_NO, K01, K10, K11, K20, K21, K30, K31, K40, K41, K50, K51, K60, K61, KC_NO, KC_NO, KC_NO, \ + K02, K03, K12, K13, K22, K23, K32, K33, K42, K43, K52, K53, K62, K63, KC_NO, KC_NO, KC_NO, \ + K04, K14, K15, K24, K25, K34, K35, K44, K45, K54, K55, K64, K71, K65, \ + K07, K79, K16, K17, K26, K27, K36, K37, K46, K47, K56, K57, K66, K67, KC_NO, \ + K06, K05, K78, K70, K72, K73, K74, K75, KC_NO, KC_NO, KC_NO \ +) + +#endif diff --git a/keyboards/gonnerd/keymaps/default/Makefile b/keyboards/gonnerd/keymaps/default/Makefile new file mode 100644 index 0000000000..772d7aee3b --- /dev/null +++ b/keyboards/gonnerd/keymaps/default/Makefile @@ -0,0 +1,21 @@ +# Build Options +# change to "no" to disable the options, or define them in the Makefile in +# the appropriate keymap folder that will get included automatically +# +BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration(+1000) +MOUSEKEY_ENABLE = yes # Mouse keys(+4700) +EXTRAKEY_ENABLE = yes # Audio control and System control(+450) +CONSOLE_ENABLE = no # Console for debug(+400) +COMMAND_ENABLE = yes # Commands for debug and configuration +NKRO_ENABLE = yes # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work +BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality +MIDI_ENABLE = no # MIDI controls +AUDIO_ENABLE = no # Audio output on port C6 +UNICODE_ENABLE = no # Unicode +BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID +RGBLIGHT_ENABLE = no # Enable WS2812 RGB underlight. Do not enable this with audio at the same time. +SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend + +ifndef QUANTUM_DIR + include ../../../../Makefile +endif diff --git a/keyboards/gonnerd/keymaps/default/keymap.c b/keyboards/gonnerd/keymaps/default/keymap.c new file mode 100644 index 0000000000..d74f949dcd --- /dev/null +++ b/keyboards/gonnerd/keymaps/default/keymap.c @@ -0,0 +1,26 @@ +#include "gonnerd.h" + +#define __x__ KC_NO + +// Keymap layers +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + [0] = KEYMAP_60( /* Base */ + KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, \ + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, \ + KC_LCTL, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, __x__, KC_ENT, \ + KC_LSFT, __x__, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, __x__, \ + KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_RALT, KC_RGUI, MO(1), KC_RCTL \ + ), + + [1] = KEYMAP_60( /* System layer to have access to RESET button */ + RESET, __x__, __x__, __x__, __x__, __x__, __x__, __x__, __x__, __x__, __x__, __x__, __x__, __x__, \ + __x__, __x__, __x__, __x__, __x__, __x__, __x__, __x__, __x__, __x__, __x__, __x__, __x__, __x__, \ + __x__, __x__, __x__, __x__, __x__, __x__, __x__, __x__, __x__, __x__, __x__, __x__, __x__, __x__, \ + __x__, __x__, __x__, __x__, __x__, __x__, __x__, __x__, __x__, __x__, __x__, __x__, __x__, __x__, \ + __x__, __x__, __x__, __x__, __x__, __x__, KC_TRNS, __x__ \ + ), +}; + +const uint16_t PROGMEM fn_actions[] = { + +}; diff --git a/keyboards/gonnerd/keymaps/mauin/Makefile b/keyboards/gonnerd/keymaps/mauin/Makefile new file mode 100644 index 0000000000..772d7aee3b --- /dev/null +++ b/keyboards/gonnerd/keymaps/mauin/Makefile @@ -0,0 +1,21 @@ +# Build Options +# change to "no" to disable the options, or define them in the Makefile in +# the appropriate keymap folder that will get included automatically +# +BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration(+1000) +MOUSEKEY_ENABLE = yes # Mouse keys(+4700) +EXTRAKEY_ENABLE = yes # Audio control and System control(+450) +CONSOLE_ENABLE = no # Console for debug(+400) +COMMAND_ENABLE = yes # Commands for debug and configuration +NKRO_ENABLE = yes # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work +BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality +MIDI_ENABLE = no # MIDI controls +AUDIO_ENABLE = no # Audio output on port C6 +UNICODE_ENABLE = no # Unicode +BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID +RGBLIGHT_ENABLE = no # Enable WS2812 RGB underlight. Do not enable this with audio at the same time. +SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend + +ifndef QUANTUM_DIR + include ../../../../Makefile +endif diff --git a/keyboards/gonnerd/keymaps/mauin/keymap.c b/keyboards/gonnerd/keymaps/mauin/keymap.c new file mode 100644 index 0000000000..5979a7ca44 --- /dev/null +++ b/keyboards/gonnerd/keymaps/mauin/keymap.c @@ -0,0 +1,108 @@ +#include "gonnerd.h" + +// Keymap layers +#define BASE_LAYER 0 +#define FUNCTION_LAYER 1 +#define SYSTEM_LAYER 2 + +// Key aliases +#define __x__ KC_NO + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + /* Layer 0: Default Layer + * ,-----------------------------------------------------------. + * |Esc| 1| 2| 3| 4| 5| 6| 7| 8| 9| 0| -| = | BSp | + * |-----------------------------------------------------------| + * |Tab | Q| W| E| R| T| Y| U| I| O| P| [| ]| \| + * |-----------------------------------------------------------| + * |Funct | A| S| D| F| G| H| J| K| L| ;| '|Enter | + * |-----------------------------------------------------------| + * |Shift | Z| X| C| V| B| N| M| ,| .| /| Shift | + * |-----------------------------------------------------------' + * | Ctl|Alt|Gui | Space |Gui |Alt| F2| Ctl | + * `-----------------------------------------------------------' + */ + [BASE_LAYER] = KEYMAP_60( + F(0), KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, \ + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, \ + MO(1), KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, __x__, KC_ENT, \ + KC_LSFT, __x__, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, __x__, \ + KC_LCTL, KC_LALT, KC_LGUI, KC_SPC, KC_RGUI, KC_RALT, MO(2), KC_RCTL \ + ), + + /* Layer 1: Function Layer + * ,-----------------------------------------------------------. + * | | F1| F2| F3| F4| F5| F6| F7| F8| F9|F10|F11| F12| Del | + * |-----------------------------------------------------------| + * | |Prv|Ply|Nxt| | |Pg^|Hme|Up |End| |Br-|Br+| | + * |-----------------------------------------------------------| + * |Hold |Mte|Vl-|Vl+| | |Pgv|Lft|Dwn|Rgt| | | | + * |-----------------------------------------------------------| + * | | | | | | | | | | | | | + * |-----------------------------------------------------------' + * | | | | | | | | | + * `-----------------------------------------------------------' + */ + [FUNCTION_LAYER] = KEYMAP_60( + KC_GRV, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_DEL, \ + __x__, KC_MPRV, KC_MPLY, KC_MNXT, __x__, __x__, KC_PGUP, KC_HOME, KC_UP, KC_END, __x__, KC_SLCK, KC_PAUS, __x__, \ + KC_TRNS, KC_MUTE, KC_VOLD, KC_VOLU, __x__, __x__, KC_PGDN, KC_LEFT, KC_DOWN, KC_RGHT, __x__, __x__, __x__, __x__, \ + KC_LSFT, __x__, __x__, __x__, __x__, __x__, __x__, __x__, __x__, __x__, __x__, __x__, __x__, __x__, \ + KC_LCTL, KC_LALT, KC_LGUI, KC_SPC, __x__, __x__, __x__, __x__ \ + ), + + /* Layer 2: System Layer + * ,-----------------------------------------------------------. + * |Reset| | | | | | | | | | | | | | + * |-----------------------------------------------------------| + * | | | | | | | | | | | | | | | + * |-----------------------------------------------------------| + * | | | | | | | | | | | | | | + * |-----------------------------------------------------------| + * | | | | | | | | | | | | | + * |-----------------------------------------------------------' + * | | | | | | | | | + * `-----------------------------------------------------------' + */ + [SYSTEM_LAYER] = KEYMAP_60( + RESET, __x__, __x__, __x__, __x__, __x__, __x__, __x__, __x__, __x__, __x__, __x__, __x__, __x__, \ + __x__, __x__, __x__, __x__, __x__, __x__, __x__, __x__, __x__, __x__, __x__, __x__, __x__, __x__, \ + __x__, __x__, __x__, __x__, __x__, __x__, __x__, __x__, __x__, __x__, __x__, __x__, __x__, __x__, \ + __x__, __x__, __x__, __x__, __x__, __x__, __x__, __x__, __x__, __x__, __x__, __x__, __x__, __x__, \ + __x__, __x__, __x__, __x__, __x__, __x__, KC_TRNS, __x__ \ + ), +}; + +enum function_id { + ESC_GRV, // Makes Esc behave like `~ when pressed with the left GUI modifier. This is the "switch between windows of the same application" key combination in macOS +}; + +const uint16_t PROGMEM fn_actions[] = { + [0] = ACTION_FUNCTION(ESC_GRV), +}; + +void action_function(keyrecord_t *record, uint8_t id, uint8_t opt) { + static uint8_t esc_grv_mask; + switch (id) { + case ESC_GRV: + esc_grv_mask = get_mods() & MOD_BIT(KC_LGUI); + if (record->event.pressed) { + if (esc_grv_mask) { + add_key(KC_GRV); + send_keyboard_report(); + } else { + add_key(KC_ESC); + send_keyboard_report(); + } + } else { + if (esc_grv_mask) { + del_key(KC_GRV); + send_keyboard_report(); + } else { + del_key(KC_ESC); + send_keyboard_report(); + } + } + break; + } +} diff --git a/keyboards/gonnerd/keymaps/mauin/readme.md b/keyboards/gonnerd/keymaps/mauin/readme.md new file mode 100644 index 0000000000..63be7c3923 --- /dev/null +++ b/keyboards/gonnerd/keymaps/mauin/readme.md @@ -0,0 +1,5 @@ +# Mauin's keymap for the GON NerD + +This layout is based on a Pok3r style layout with a standard base layer. + +Function layers provide access to navigation and media keys. diff --git a/keyboards/gonnerd/readme.md b/keyboards/gonnerd/readme.md new file mode 100644 index 0000000000..807df308a5 --- /dev/null +++ b/keyboards/gonnerd/readme.md @@ -0,0 +1,38 @@ +GON NerD keyboard firmware +====================== + +## Changing Bootloader + +It's not possible to simply flash this firmware on the GON NerD keyboard as the original bootloader does not support DFU connections. + +It is possible to change the bootloader of the GON NerD with an ISP programmer. A guide on how to change the bootloader on your GON NerD can be found here: +[Converting NerD60 to TMK](https://deskthority.net/wiki/Converting_NerD60_to_TMK). After changing the bootloader you can flash your QMK keymap onto the keyboard. + +_After changing the bootloader on your GON NerD PCB you will not be able to go back to the original firmware and the official configuration software will +not work anymore. You will lose your warranty and official support from GON!_ + +## Reset button + +To run the `make dfu` command to flash keymaps onto the board, you need to put the board into DFU mode. As the GON NerD PCBs do not have a reset button on the board to put it into DFU mode, be sure to include a `RESET` button on your keymap. Otherwise you'll have to unscrew your keyboard from the case and short the GND and RST pins. + +## Building + +Download or clone the whole firmware and navigate to the keyboards/gonnerd folder. Once your dev env is setup, you'll be able to type `make` to generate your .hex - you can then use the Teensy Loader to program your .hex file. + +Depending on which keymap you would like to use, you will have to compile slightly differently. + +### Default + +To build with the default keymap, simply run `make default`. + +### Other Keymaps + +Several version of keymap are available in advance but you are recommended to define your favorite layout yourself. To define your own keymap create a folder with the name of your keymap in the keymaps folder, and see keymap documentation (you can find in top readme.md) and existant keymap files. + +To build the firmware binary hex file with a keymap just do `make` with a keymap like this: + +``` +$ make [default|jack|<name>] +``` + +Keymaps follow the format **__\<name\>.c__** and are stored in the `keymaps` folder. diff --git a/keyboards/gonnerd/rules.mk b/keyboards/gonnerd/rules.mk new file mode 100644 index 0000000000..c9b584d542 --- /dev/null +++ b/keyboards/gonnerd/rules.mk @@ -0,0 +1,66 @@ +# MCU name +MCU = atmega32u4 + +# Processor frequency. +# This will define a symbol, F_CPU, in all source code files equal to the +# processor frequency in Hz. You can then use this symbol in your source code to +# calculate timings. Do NOT tack on a 'UL' at the end, this will be done +# automatically to create a 32-bit value in your source code. +# +# This will be an integer division of F_USB below, as it is sourced by +# F_USB after it has run through any CPU prescalers. Note that this value +# does not *change* the processor frequency - it should merely be updated to +# reflect the processor speed set externally so that the code can use accurate +# software delays. +F_CPU = 8000000 + + +# +# LUFA specific +# +# Target architecture (see library "Board Types" documentation). +ARCH = AVR8 + +# Input clock frequency. +# This will define a symbol, F_USB, in all source code files equal to the +# input clock frequency (before any prescaling is performed) in Hz. This value may +# differ from F_CPU if prescaling is used on the latter, and is required as the +# raw input clock is fed directly to the PLL sections of the AVR for high speed +# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL' +# at the end, this will be done automatically to create a 32-bit value in your +# source code. +# +# If no clock division is performed on the input clock inside the AVR (via the +# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. +F_USB = $(F_CPU) + +# Interrupt driven control endpoint task(+60) +OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT + + +# Boot Section Size in *bytes* +# Teensy halfKay 512 +# Teensy++ halfKay 1024 +# Atmel DFU loader 4096 +# LUFA bootloader 4096 +# USBaspLoader 2048 +OPT_DEFS += -DBOOTLOADER_SIZE=4096 + + +# Build Options +# change yes to no to disable +# +BOOTMAGIC_ENABLE ?= no # Virtual DIP switch configuration(+1000) +MOUSEKEY_ENABLE ?= yes # Mouse keys(+4700) +EXTRAKEY_ENABLE ?= yes # Audio control and System control(+450) +CONSOLE_ENABLE ?= no # Console for debug(+400) +COMMAND_ENABLE ?= yes # Commands for debug and configuration + # Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE +SLEEP_LED_ENABLE ?= no # Breathing sleep LED during USB suspend + # if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work +NKRO_ENABLE ?= no # USB Nkey Rollover +BACKLIGHT_ENABLE ?= yes # Enable keyboard backlight functionality on B7 by default +MIDI_ENABLE ?= no # MIDI controls +UNICODE_ENABLE ?= no # Unicode +BLUETOOTH_ENABLE ?= no # Enable Bluetooth with the Adafruit EZ-Key HID +AUDIO_ENABLE ?= no # Audio output on port C6 |