diff options
Diffstat (limited to 'keyboards/eyeohdesigns/humble40/readme.md')
| -rw-r--r-- | keyboards/eyeohdesigns/humble40/readme.md | 31 |
1 files changed, 31 insertions, 0 deletions
diff --git a/keyboards/eyeohdesigns/humble40/readme.md b/keyboards/eyeohdesigns/humble40/readme.md new file mode 100644 index 0000000000..cf82fa264a --- /dev/null +++ b/keyboards/eyeohdesigns/humble40/readme.md @@ -0,0 +1,31 @@ +# humble40 + + + +A 12.5u WKL 40% offering uniform and standard row stagger configurations. + +* Keyboard Maintainer: [Eye Oh Designs](https://github.com/joedinkle) +* Hardware Supported: humble40 (RP2040 MCU) +* Hardware Availability: Group buy took place between 2022-06-17 1900 UTC and 2022-07-09 0400 UTC on [Eye Oh Designs](https://eyeohdesigns.com/) + +Make example for this keyboard (after setting up your build environment): + + make eyeohdesigns/humble40:default + +Flashing example for this keyboard + + make eyeohdesigns/humble40:default:flash + +See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). + +## Bootloader + +Enter the bootloader in 3 ways: + +* **Bootmagic reset**: Hold down the top left key and plug in the keyboard. This will also clear the emulated EEPROM, so it is a good first step if the keyboard is misbehaving. +* **Physical reset button**: Short the two holes in the PCB marked `TP6` and plug the board in. +* **Keycode in layout**: There is no key mapped to `QK_BOOT` in the pre-provided keymaps, but you may assign this key in any keymaps you create. + +## Flashing + +After entering the bootloader through one of the three methods above, the keyboard will appear as a USB mass storage device named `RPI-RP2`. If the CLI is unable to find this device, the compiled `.uf2` file can be manually copied to it. The keyboard will reboot on completion with the new firmware loaded. |