summaryrefslogtreecommitdiff
path: root/keyboards/ergodox/infinity
diff options
context:
space:
mode:
Diffstat (limited to 'keyboards/ergodox/infinity')
-rw-r--r--keyboards/ergodox/infinity/Makefile2
-rw-r--r--keyboards/ergodox/infinity/animations.c107
-rw-r--r--keyboards/ergodox/infinity/animations.h30
-rw-r--r--keyboards/ergodox/infinity/config.h4
-rw-r--r--keyboards/ergodox/infinity/drivers/gdisp/IS31FL3731C/gdisp_IS31FL3731C.c37
-rw-r--r--keyboards/ergodox/infinity/drivers/gdisp/st7565ergodox/board_ST7565.h80
-rw-r--r--keyboards/ergodox/infinity/drivers/gdisp/st7565ergodox/gdisp_lld_ST7565.c411
-rw-r--r--keyboards/ergodox/infinity/drivers/gdisp/st7565ergodox/gdisp_lld_config.h11
-rw-r--r--keyboards/ergodox/infinity/drivers/gdisp/st7565ergodox/st7565.h2
-rw-r--r--keyboards/ergodox/infinity/gfxconf.h2
-rw-r--r--keyboards/ergodox/infinity/infinity.c51
-rw-r--r--keyboards/ergodox/infinity/infinity.h71
-rw-r--r--keyboards/ergodox/infinity/matrix.c1
-rw-r--r--keyboards/ergodox/infinity/rules.mk13
-rw-r--r--keyboards/ergodox/infinity/simple_visualizer.h123
-rw-r--r--keyboards/ergodox/infinity/visualizer.c329
16 files changed, 955 insertions, 319 deletions
diff --git a/keyboards/ergodox/infinity/Makefile b/keyboards/ergodox/infinity/Makefile
index 191c6bb664..bd09e5885d 100644
--- a/keyboards/ergodox/infinity/Makefile
+++ b/keyboards/ergodox/infinity/Makefile
@@ -1,3 +1,3 @@
ifndef MAKEFILE_INCLUDED
include ../../../Makefile
-endif \ No newline at end of file
+endif
diff --git a/keyboards/ergodox/infinity/animations.c b/keyboards/ergodox/infinity/animations.c
new file mode 100644
index 0000000000..4c9f6d9c85
--- /dev/null
+++ b/keyboards/ergodox/infinity/animations.c
@@ -0,0 +1,107 @@
+/* Copyright 2017 Fred Sundvik
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#if defined(VISUALIZER_ENABLE)
+
+#include "animations.h"
+#include "visualizer.h"
+#ifdef LCD_ENABLE
+#include "lcd_keyframes.h"
+#endif
+#ifdef LCD_BACKLIGHT_ENABLE
+#include "lcd_backlight_keyframes.h"
+#endif
+
+#ifdef LED_ENABLE
+#include "led_keyframes.h"
+#endif
+
+#include "visualizer_keyframes.h"
+
+
+#if defined(LCD_ENABLE) && defined(LCD_BACKLIGHT_ENABLE)
+
+// Don't worry, if the startup animation is long, you can use the keyboard like normal
+// during that time
+keyframe_animation_t default_startup_animation = {
+ .num_frames = 4,
+ .loop = false,
+ .frame_lengths = {0, 0, 0, gfxMillisecondsToTicks(5000), 0},
+ .frame_functions = {
+ lcd_keyframe_enable,
+ backlight_keyframe_enable,
+ lcd_keyframe_draw_logo,
+ backlight_keyframe_animate_color,
+ },
+};
+
+keyframe_animation_t default_suspend_animation = {
+ .num_frames = 4,
+ .loop = false,
+ .frame_lengths = {0, gfxMillisecondsToTicks(1000), 0, 0},
+ .frame_functions = {
+ lcd_keyframe_display_layer_text,
+ backlight_keyframe_animate_color,
+ lcd_keyframe_disable,
+ backlight_keyframe_disable,
+ },
+};
+#endif
+
+#if defined(LED_ENABLE)
+#define CROSSFADE_TIME 1000
+#define GRADIENT_TIME 3000
+
+keyframe_animation_t led_test_animation = {
+ .num_frames = 14,
+ .loop = true,
+ .frame_lengths = {
+ gfxMillisecondsToTicks(1000), // fade in
+ gfxMillisecondsToTicks(1000), // no op (leds on)
+ gfxMillisecondsToTicks(1000), // fade out
+ gfxMillisecondsToTicks(CROSSFADE_TIME), // crossfade
+ gfxMillisecondsToTicks(GRADIENT_TIME), // left to rigt (outside in)
+ gfxMillisecondsToTicks(CROSSFADE_TIME), // crossfade
+ gfxMillisecondsToTicks(GRADIENT_TIME), // top_to_bottom
+ 0, // mirror leds
+ gfxMillisecondsToTicks(CROSSFADE_TIME), // crossfade
+ gfxMillisecondsToTicks(GRADIENT_TIME), // left_to_right (mirrored, so inside out)
+ gfxMillisecondsToTicks(CROSSFADE_TIME), // crossfade
+ gfxMillisecondsToTicks(GRADIENT_TIME), // top_to_bottom
+ 0, // normal leds
+ gfxMillisecondsToTicks(CROSSFADE_TIME), // crossfade
+
+ },
+ .frame_functions = {
+ led_keyframe_fade_in_all,
+ keyframe_no_operation,
+ led_keyframe_fade_out_all,
+ led_keyframe_crossfade,
+ led_keyframe_left_to_right_gradient,
+ led_keyframe_crossfade,
+ led_keyframe_top_to_bottom_gradient,
+ led_keyframe_mirror_orientation,
+ led_keyframe_crossfade,
+ led_keyframe_left_to_right_gradient,
+ led_keyframe_crossfade,
+ led_keyframe_top_to_bottom_gradient,
+ led_keyframe_normal_orientation,
+ led_keyframe_crossfade,
+ },
+};
+#endif
+
+#endif
diff --git a/keyboards/ergodox/infinity/animations.h b/keyboards/ergodox/infinity/animations.h
new file mode 100644
index 0000000000..6d8b9830d9
--- /dev/null
+++ b/keyboards/ergodox/infinity/animations.h
@@ -0,0 +1,30 @@
+/* Copyright 2017 Fred Sundvik
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#ifndef KEYBOARDS_ERGODOX_INFINITY_ANIMATIONS_H_
+#define KEYBOARDS_ERGODOX_INFINITY_ANIMATIONS_H_
+
+#include "visualizer.h"
+
+// You can use these default animations, but of course you can also write your own custom ones instead
+extern keyframe_animation_t default_startup_animation;
+extern keyframe_animation_t default_suspend_animation;
+
+// An animation for testing and demonstrating the led support, should probably not be used for real world
+// cases
+extern keyframe_animation_t led_test_animation;
+
+#endif /* KEYBOARDS_ERGODOX_INFINITY_ANIMATIONS_H_ */
diff --git a/keyboards/ergodox/infinity/config.h b/keyboards/ergodox/infinity/config.h
index 9e264083be..95f713819e 100644
--- a/keyboards/ergodox/infinity/config.h
+++ b/keyboards/ergodox/infinity/config.h
@@ -40,7 +40,7 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
/* number of backlight levels */
#define BACKLIGHT_LEVELS 3
-#define LED_BRIGHTNESS_LO 15
+#define LED_BRIGHTNESS_LO 100
#define LED_BRIGHTNESS_HI 255
/* define if matrix has ghost */
@@ -54,6 +54,8 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
// The visualizer needs gfx thread priorities
#define VISUALIZER_THREAD_PRIORITY (NORMAL_PRIORITY - 2)
+#define VISUALIZER_USER_DATA_SIZE 16
+
/*
* Feature disable options
* These options are also useful to firmware size reduction.
diff --git a/keyboards/ergodox/infinity/drivers/gdisp/IS31FL3731C/gdisp_IS31FL3731C.c b/keyboards/ergodox/infinity/drivers/gdisp/IS31FL3731C/gdisp_IS31FL3731C.c
index 1d21f0c498..ea09c4bb0c 100644
--- a/keyboards/ergodox/infinity/drivers/gdisp/IS31FL3731C/gdisp_IS31FL3731C.c
+++ b/keyboards/ergodox/infinity/drivers/gdisp/IS31FL3731C/gdisp_IS31FL3731C.c
@@ -25,6 +25,10 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
#include "board_IS31FL3731C.h"
+
+// Can't include led_tables from here
+extern const uint8_t CIE1931_CURVE[];
+
/*===========================================================================*/
/* Driver local definitions. */
/*===========================================================================*/
@@ -100,37 +104,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
#define IS31
-//Generated by http://jared.geek.nz/2013/feb/linear-led-pwm
-const unsigned char cie[256] = {
- 0, 0, 0, 0, 0, 1, 1, 1, 1, 1,
- 1, 1, 1, 1, 2, 2, 2, 2, 2, 2,
- 2, 2, 2, 3, 3, 3, 3, 3, 3, 3,
- 3, 4, 4, 4, 4, 4, 4, 5, 5, 5,
- 5, 5, 6, 6, 6, 6, 6, 7, 7, 7,
- 7, 8, 8, 8, 8, 9, 9, 9, 10, 10,
- 10, 10, 11, 11, 11, 12, 12, 12, 13, 13,
- 13, 14, 14, 15, 15, 15, 16, 16, 17, 17,
- 17, 18, 18, 19, 19, 20, 20, 21, 21, 22,
- 22, 23, 23, 24, 24, 25, 25, 26, 26, 27,
- 28, 28, 29, 29, 30, 31, 31, 32, 32, 33,
- 34, 34, 35, 36, 37, 37, 38, 39, 39, 40,
- 41, 42, 43, 43, 44, 45, 46, 47, 47, 48,
- 49, 50, 51, 52, 53, 54, 54, 55, 56, 57,
- 58, 59, 60, 61, 62, 63, 64, 65, 66, 67,
- 68, 70, 71, 72, 73, 74, 75, 76, 77, 79,
- 80, 81, 82, 83, 85, 86, 87, 88, 90, 91,
- 92, 94, 95, 96, 98, 99, 100, 102, 103, 105,
- 106, 108, 109, 110, 112, 113, 115, 116, 118, 120,
- 121, 123, 124, 126, 128, 129, 131, 132, 134, 136,
- 138, 139, 141, 143, 145, 146, 148, 150, 152, 154,
- 155, 157, 159, 161, 163, 165, 167, 169, 171, 173,
- 175, 177, 179, 181, 183, 185, 187, 189, 191, 193,
- 196, 198, 200, 202, 204, 207, 209, 211, 214, 216,
- 218, 220, 223, 225, 228, 230, 232, 235, 237, 240,
- 242, 245, 247, 250, 252, 255,
-};
-
-
/*===========================================================================*/
/* Driver local functions. */
/*===========================================================================*/
@@ -231,7 +204,7 @@ LLDSPEC bool_t gdisp_lld_init(GDisplay *g) {
uint8_t* src = PRIV(g)->frame_buffer;
for (int y=0;y<GDISP_SCREEN_HEIGHT;y++) {
for (int x=0;x<GDISP_SCREEN_WIDTH;x++) {
- PRIV(g)->write_buffer[get_led_address(g, x, y)]=cie[*src];
+ PRIV(g)->write_buffer[get_led_address(g, x, y)]=CIE1931_CURVE[*src];
++src;
}
}
diff --git a/keyboards/ergodox/infinity/drivers/gdisp/st7565ergodox/board_ST7565.h b/keyboards/ergodox/infinity/drivers/gdisp/st7565ergodox/board_ST7565.h
index 290571ce5b..9650ffb440 100644
--- a/keyboards/ergodox/infinity/drivers/gdisp/st7565ergodox/board_ST7565.h
+++ b/keyboards/ergodox/infinity/drivers/gdisp/st7565ergodox/board_ST7565.h
@@ -8,8 +8,6 @@
#ifndef _GDISP_LLD_BOARD_H
#define _GDISP_LLD_BOARD_H
-#include "print.h"
-
#define ST7565_LCD_BIAS ST7565_LCD_BIAS_9 // actually 6
#define ST7565_ADC ST7565_ADC_NORMAL
#define ST7565_COM_SCAN ST7565_COM_SCAN_DEC
@@ -39,35 +37,49 @@
// MSB First
// CLK Low by default
static const SPIConfig spi1config = {
- NULL,
- /* HW dependent part.*/
- ST7565_GPIOPORT,
- ST7565_SS_PIN,
- SPIx_CTARn_FMSZ(7)
- | SPIx_CTARn_ASC(7)
- | SPIx_CTARn_DT(7)
- | SPIx_CTARn_CSSCK(7)
- | SPIx_CTARn_PBR(0)
- | SPIx_CTARn_BR(7)
- //SPI_CR1_BR_0
+ // Operation complete callback or @p NULL.
+ .end_cb = NULL,
+ //The chip select line port - when not using pcs.
+ .ssport = ST7565_GPIOPORT,
+ // brief The chip select line pad number - when not using pcs.
+ .sspad=ST7565_SS_PIN,
+ // SPI initialization data.
+ .tar0 =
+ SPIx_CTARn_FMSZ(7) // Frame size = 8 bytes
+ | SPIx_CTARn_ASC(1) // After SCK Delay Scaler (min 50 ns) = 55.56ns
+ | SPIx_CTARn_DT(0) // Delay After Transfer Scaler (no minimum)= 27.78ns
+ | SPIx_CTARn_CSSCK(0) // PCS to SCK Delay Scaler (min 20 ns) = 27.78ns
+ | SPIx_CTARn_PBR(0) // Baud Rate Prescaler = 2
+ | SPIx_CTARn_BR(0) // Baud rate (min 50ns) = 55.56ns
};
-static bool_t st7565_is_data_mode = 1;
+static GFXINLINE void acquire_bus(GDisplay *g) {
+ (void) g;
+ // Only the LCD is using the SPI bus, so no need to acquire
+ // spiAcquireBus(&SPID1);
+ spiSelect(&SPID1);
+}
+
+static GFXINLINE void release_bus(GDisplay *g) {
+ (void) g;
+ // Only the LCD is using the SPI bus, so no need to release
+ //spiReleaseBus(&SPID1);
+ spiUnselect(&SPID1);
+}
static GFXINLINE void init_board(GDisplay *g) {
(void) g;
palSetPadModeNamed(A0, PAL_MODE_OUTPUT_PUSHPULL);
palSetPad(ST7565_GPIOPORT, ST7565_A0_PIN);
- st7565_is_data_mode = 1;
palSetPadModeNamed(RST, PAL_MODE_OUTPUT_PUSHPULL);
palSetPad(ST7565_GPIOPORT, ST7565_RST_PIN);
palSetPadModeRaw(MOSI, ST7565_SPI_MODE);
palSetPadModeRaw(SLCK, ST7565_SPI_MODE);
- palSetPadModeRaw(SS, ST7565_SPI_MODE);
+ palSetPadModeNamed(SS, PAL_MODE_OUTPUT_PUSHPULL);
spiInit();
spiStart(&SPID1, &spi1config);
- spiSelect(&SPID1);
+ release_bus(g);
}
static GFXINLINE void post_init_board(GDisplay *g) {
@@ -84,43 +96,17 @@ static GFXINLINE void setpin_reset(GDisplay *g, bool_t state) {
}
}
-static GFXINLINE void acquire_bus(GDisplay *g) {
- (void) g;
- // Only the LCD is using the SPI bus, so no need to acquire
- // spiAcquireBus(&SPID1);
+static GFXINLINE void enter_data_mode(GDisplay *g) {
+ palSetPad(ST7565_GPIOPORT, ST7565_A0_PIN);
}
-static GFXINLINE void release_bus(GDisplay *g) {
- (void) g;
- // Only the LCD is using the SPI bus, so no need to release
- //spiReleaseBus(&SPID1);
+static GFXINLINE void enter_cmd_mode(GDisplay *g) {
+ palClearPad(ST7565_GPIOPORT, ST7565_A0_PIN);
}
-static GFXINLINE void write_cmd(GDisplay *g, uint8_t cmd) {
- (void) g;
- if (st7565_is_data_mode) {
- // The sleeps need to be at lest 10 vs 25 ns respectively
- // So let's sleep two ticks, one tick might not be enough
- // if we are at the end of the tick
- chThdSleep(2);
- palClearPad(ST7565_GPIOPORT, ST7565_A0_PIN);
- chThdSleep(2);
- st7565_is_data_mode = 0;
- }
- spiSend(&SPID1, 1, &cmd);
-}
static GFXINLINE void write_data(GDisplay *g, uint8_t* data, uint16_t length) {
(void) g;
- if (!st7565_is_data_mode) {
- // The sleeps need to be at lest 10 vs 25 ns respectively
- // So let's sleep two ticks, one tick might not be enough
- // if we are at the end of the tick
- chThdSleep(2);
- palSetPad(ST7565_GPIOPORT, ST7565_A0_PIN);
- chThdSleep(2);
- st7565_is_data_mode = 1;
- }
spiSend(&SPID1, length, data);
}
diff --git a/keyboards/ergodox/infinity/drivers/gdisp/st7565ergodox/gdisp_lld_ST7565.c b/keyboards/ergodox/infinity/drivers/gdisp/st7565ergodox/gdisp_lld_ST7565.c
index c33aea81a8..b04ad02935 100644
--- a/keyboards/ergodox/infinity/drivers/gdisp/st7565ergodox/gdisp_lld_ST7565.c
+++ b/keyboards/ergodox/infinity/drivers/gdisp/st7565ergodox/gdisp_lld_ST7565.c
@@ -20,16 +20,16 @@
/*===========================================================================*/
#ifndef GDISP_SCREEN_HEIGHT
- #define GDISP_SCREEN_HEIGHT 32
+#define GDISP_SCREEN_HEIGHT 32
#endif
#ifndef GDISP_SCREEN_WIDTH
- #define GDISP_SCREEN_WIDTH 128
+#define GDISP_SCREEN_WIDTH 128
#endif
#ifndef GDISP_INITIAL_CONTRAST
- #define GDISP_INITIAL_CONTRAST 0
+#define GDISP_INITIAL_CONTRAST 35
#endif
#ifndef GDISP_INITIAL_BACKLIGHT
- #define GDISP_INITIAL_BACKLIGHT 100
+#define GDISP_INITIAL_BACKLIGHT 100
#endif
#define GDISP_FLG_NEEDFLUSH (GDISP_FLG_DRIVER<<0)
@@ -40,16 +40,16 @@
/* Driver config defaults for backward compatibility. */
/*===========================================================================*/
#ifndef ST7565_LCD_BIAS
- #define ST7565_LCD_BIAS ST7565_LCD_BIAS_7
+#define ST7565_LCD_BIAS ST7565_LCD_BIAS_7
#endif
#ifndef ST7565_ADC
- #define ST7565_ADC ST7565_ADC_NORMAL
+#define ST7565_ADC ST7565_ADC_NORMAL
#endif
#ifndef ST7565_COM_SCAN
- #define ST7565_COM_SCAN ST7565_COM_SCAN_INC
+#define ST7565_COM_SCAN ST7565_COM_SCAN_INC
#endif
#ifndef ST7565_PAGE_ORDER
- #define ST7565_PAGE_ORDER 0,1,2,3
+#define ST7565_PAGE_ORDER 0,1,2,3
#endif
/*===========================================================================*/
@@ -58,12 +58,24 @@
typedef struct{
bool_t buffer2;
+ uint8_t data_pos;
+ uint8_t data[16];
uint8_t ram[GDISP_SCREEN_HEIGHT * GDISP_SCREEN_WIDTH / 8];
}PrivData;
// Some common routines and macros
#define PRIV(g) ((PrivData*)g->priv)
#define RAM(g) (PRIV(g)->ram)
+
+static GFXINLINE void write_cmd(GDisplay* g, uint8_t cmd) {
+ PRIV(g)->data[PRIV(g)->data_pos++] = cmd;
+}
+
+static GFXINLINE void flush_cmd(GDisplay* g) {
+ write_data(g, PRIV(g)->data, PRIV(g)->data_pos);
+ PRIV(g)->data_pos = 0;
+}
+
#define write_cmd2(g, cmd1, cmd2) { write_cmd(g, cmd1); write_cmd(g, cmd2); }
#define write_cmd3(g, cmd1, cmd2, cmd3) { write_cmd(g, cmd1); write_cmd(g, cmd2); write_cmd(g, cmd3); }
@@ -86,207 +98,232 @@ typedef struct{
*/
LLDSPEC bool_t gdisp_lld_init(GDisplay *g) {
- // The private area is the display surface.
- g->priv = gfxAlloc(sizeof(PrivData));
- PRIV(g)->buffer2 = false;
-
- // Initialise the board interface
- init_board(g);
-
- // Hardware reset
- setpin_reset(g, TRUE);
- gfxSleepMilliseconds(20);
- setpin_reset(g, FALSE);
- gfxSleepMilliseconds(20);
-
- acquire_bus(g);
- write_cmd(g, ST7565_DISPLAY_OFF);
- write_cmd(g, ST7565_LCD_BIAS);
+ // The private area is the display surface.
+ g->priv = gfxAlloc(sizeof(PrivData));
+ PRIV(g)->buffer2 = false;
+ PRIV(g)->data_pos = 0;
+
+ // Initialise the board interface
+ init_board(g);
+
+ // Hardware reset
+ setpin_reset(g, TRUE);
+ gfxSleepMilliseconds(20);
+ setpin_reset(g, FALSE);
+ gfxSleepMilliseconds(20);
+ acquire_bus(g);
+ enter_cmd_mode(g);
+
+ write_cmd(g, ST7565_RESET);
+ write_cmd(g, ST7565_LCD_BIAS);
write_cmd(g, ST7565_ADC);
write_cmd(g, ST7565_COM_SCAN);
-
- write_cmd(g, ST7565_START_LINE | 0);
-
- write_cmd(g, ST7565_RESISTOR_RATIO | 0x6);
-
- // turn on voltage converter (VC=1, VR=0, VF=0)
- write_cmd(g, ST7565_POWER_CONTROL | 0x04);
- delay_ms(50);
- // turn on voltage regulator (VC=1, VR=1, VF=0)
- write_cmd(g, ST7565_POWER_CONTROL | 0x06);
- delay_ms(50);
+ write_cmd(g, ST7565_RESISTOR_RATIO | 0x1);
+ write_cmd2(g, ST7565_CONTRAST, GDISP_INITIAL_CONTRAST);
- // turn on voltage follower (VC=1, VR=1, VF=1)
- write_cmd(g, ST7565_POWER_CONTROL | 0x07);
- delay_ms(50);
+ // turn on internal power supply (VC=1, VR=1, VF=1)
+ write_cmd(g, ST7565_POWER_CONTROL | 0x07);
- write_cmd(g, 0xE2);
- write_cmd(g, ST7565_COM_SCAN);
- write_cmd2(g, ST7565_CONTRAST, GDISP_INITIAL_CONTRAST*64/101);
- //write_cmd2(g, ST7565_CONTRAST, 0);
- write_cmd(g, ST7565_DISPLAY_ON);
- write_cmd(g, ST7565_ALLON_NORMAL);
- write_cmd(g, ST7565_INVERT_DISPLAY);
+ write_cmd(g, ST7565_INVERT_DISPLAY);
+ write_cmd(g, ST7565_ALLON_NORMAL);
- write_cmd(g, ST7565_RMW);
+ write_cmd(g, ST7565_START_LINE | 0);
+ write_cmd(g, ST7565_RMW);
+ flush_cmd(g);
// Finish Init
post_init_board(g);
- // Release the bus
- release_bus(g);
-
- /* Initialise the GDISP structure */
- g->g.Width = GDISP_SCREEN_WIDTH;
- g->g.Height = GDISP_SCREEN_HEIGHT;
- g->g.Orientation = GDISP_ROTATE_0;
- g->g.Powermode = powerOn;
- g->g.Backlight = GDISP_INITIAL_BACKLIGHT;
- g->g.Contrast = GDISP_INITIAL_CONTRAST;
- return TRUE;
+ // Release the bus
+ release_bus(g);
+
+ /* Initialise the GDISP structure */
+ g->g.Width = GDISP_SCREEN_WIDTH;
+ g->g.Height = GDISP_SCREEN_HEIGHT;
+ g->g.Orientation = GDISP_ROTATE_0;
+ g->g.Powermode = powerOff;
+ g->g.Backlight = GDISP_INITIAL_BACKLIGHT;
+ g->g.Contrast = GDISP_INITIAL_CONTRAST;
+ return TRUE;
}
#if GDISP_HARDWARE_FLUSH
- LLDSPEC void gdisp_lld_flush(GDisplay *g) {
- unsigned p;
-
- // Don't flush if we don't need it.
- if (!(g->flags & GDISP_FLG_NEEDFLUSH))
- return;
-
- acquire_bus(g);
- unsigned dstOffset = (PRIV(g)->buffer2 ? 4 : 0);
- for (p = 0; p < 4; p++) {
- write_cmd(g, ST7565_PAGE | (p + dstOffset));
- write_cmd(g, ST7565_COLUMN_MSB | 0);
- write_cmd(g, ST7565_COLUMN_LSB | 0);
- write_cmd(g, ST7565_RMW);
- write_data(g, RAM(g) + (p*GDISP_SCREEN_WIDTH), GDISP_SCREEN_WIDTH);
- }
- unsigned line = (PRIV(g)->buffer2 ? 32 : 0);
- write_cmd(g, ST7565_START_LINE | line);
- PRIV(g)->buffer2 = !PRIV(g)->buffer2;
- release_bus(g);
-
- g->flags &= ~GDISP_FLG_NEEDFLUSH;
- }
+LLDSPEC void gdisp_lld_flush(GDisplay *g) {
+ unsigned p;
+
+ // Don't flush if we don't need it.
+ if (!(g->flags & GDISP_FLG_NEEDFLUSH))
+ return;
+
+ acquire_bus(g);
+ enter_cmd_mode(g);
+ unsigned dstOffset = (PRIV(g)->buffer2 ? 4 : 0);
+ for (p = 0; p < 4; p++) {
+ write_cmd(g, ST7565_PAGE | (p + dstOffset));
+ write_cmd(g, ST7565_COLUMN_MSB | 0);
+ write_cmd(g, ST7565_COLUMN_LSB | 0);
+ write_cmd(g, ST7565_RMW);
+ flush_cmd(g);
+ enter_data_mode(g);
+ write_data(g, RAM(g) + (p*GDISP_SCREEN_WIDTH), GDISP_SCREEN_WIDTH);
+ enter_cmd_mode(g);
+ }
+ unsigned line = (PRIV(g)->buffer2 ? 32 : 0);
+ write_cmd(g, ST7565_START_LINE | line);
+ flush_cmd(g);
+ PRIV(g)->buffer2 = !PRIV(g)->buffer2;
+ release_bus(g);
+
+ g->flags &= ~GDISP_FLG_NEEDFLUSH;
+}
#endif
#if GDISP_HARDWARE_DRAWPIXEL
- LLDSPEC void gdisp_lld_draw_pixel(GDisplay *g) {
- coord_t x, y;
-
- switch(g->g.Orientation) {
- default:
- case GDISP_ROTATE_0:
- x = g->p.x;
- y = g->p.y;
- break;
- case GDISP_ROTATE_90:
- x = g->p.y;
- y = GDISP_SCREEN_HEIGHT-1 - g->p.x;
- break;
- case GDISP_ROTATE_180:
- x = GDISP_SCREEN_WIDTH-1 - g->p.x;
- y = GDISP_SCREEN_HEIGHT-1 - g->p.y;
- break;
- case GDISP_ROTATE_270:
- x = GDISP_SCREEN_HEIGHT-1 - g->p.y;
- y = g->p.x;
- break;
- }
- if (gdispColor2Native(g->p.color) != Black)
- RAM(g)[xyaddr(x, y)] |= xybit(y);
- else
- RAM(g)[xyaddr(x, y)] &= ~xybit(y);
- g->flags |= GDISP_FLG_NEEDFLUSH;
- }
+LLDSPEC void gdisp_lld_draw_pixel(GDisplay *g) {
+ coord_t x, y;
+
+ switch(g->g.Orientation) {
+ default:
+ case GDISP_ROTATE_0:
+ x = g->p.x;
+ y = g->p.y;
+ break;
+ case GDISP_ROTATE_90:
+ x = g->p.y;
+ y = GDISP_SCREEN_HEIGHT-1 - g->p.x;
+ break;
+ case GDISP_ROTATE_180:
+ x = GDISP_SCREEN_WIDTH-1 - g->p.x;
+ y = GDISP_SCREEN_HEIGHT-1 - g->p.y;
+ break;
+ case GDISP_ROTATE_270:
+ x = GDISP_SCREEN_HEIGHT-1 - g->p.y;
+ y = g->p.x;
+ break;
+ }
+ if (gdispColor2Native(g->p.color) != Black)
+ RAM(g)[xyaddr(x, y)] |= xybit(y);
+ else
+ RAM(g)[xyaddr(x, y)] &= ~xybit(y);
+ g->flags |= GDISP_FLG_NEEDFLUSH;
+}
#endif
#if GDISP_HARDWARE_PIXELREAD
- LLDSPEC color_t gdisp_lld_get_pixel_color(GDisplay *g) {
- coord_t x, y;
-
- switch(g->g.Orientation) {
- default:
- case GDISP_ROTATE_0:
- x = g->p.x;
- y = g->p.y;
- break;
- case GDISP_ROTATE_90:
- x = g->p.y;
- y = GDISP_SCREEN_HEIGHT-1 - g->p.x;
- break;
- case GDISP_ROTATE_180:
- x = GDISP_SCREEN_WIDTH-1 - g->p.x;
- y = GDISP_SCREEN_HEIGHT-1 - g->p.y;
- break;
- case GDISP_ROTATE_270:
- x = GDISP_SCREEN_HEIGHT-1 - g->p.y;
- y = g->p.x;
- break;
- }
- return (RAM(g)[xyaddr(x, y)] & xybit(y)) ? White : Black;
- }
+LLDSPEC color_t gdisp_lld_get_pixel_color(GDisplay *g) {
+ coord_t x, y;
+
+ switch(g->g.Orientation) {
+ default:
+ case GDISP_ROTATE_0:
+ x = g->p.x;
+ y = g->p.y;
+ break;
+ case GDISP_ROTATE_90:
+ x = g->p.y;
+ y = GDISP_SCREEN_HEIGHT-1 - g->p.x;
+ break;
+ case GDISP_ROTATE_180:
+ x = GDISP_SCREEN_WIDTH-1 - g->p.x;
+ y = GDISP_SCREEN_HEIGHT-1 - g->p.y;
+ break;
+ case GDISP_ROTATE_270:
+ x = GDISP_SCREEN_HEIGHT-1 - g->p.y;
+ y = g->p.x;
+ break;
+ }
+ return (RAM(g)[xyaddr(x, y)] & xybit(y)) ? White : Black;
+}
#endif
+LLDSPEC void gdisp_lld_blit_area(GDisplay *g) {
+ uint8_t* buffer = (uint8_t*)g->p.ptr;
+ int linelength = g->p.cx;
+ for (int i = 0; i < g->p.cy; i++) {
+ unsigned dstx = g->p.x;
+ unsigned dsty = g->p.y + i;
+ unsigned srcx = g->p.x1;
+ unsigned srcy = g->p.y1 + i;
+ unsigned srcbit = srcy * g->p.x2 + srcx;
+ for(int j=0; j < linelength; j++) {
+ uint8_t src = buffer[srcbit / 8];
+ uint8_t bit = 7-(srcbit % 8);
+ uint8_t bitset = (src >> bit) & 1;
+ uint8_t* dst = &(RAM(g)[xyaddr(dstx, dsty)]);
+ if (bitset) {
+ *dst |= xybit(dsty);
+ }
+ else {
+ *dst &= ~xybit(dsty);
+ }
+ dstx++;
+ srcbit++;
+ }
+ }
+ g->flags |= GDISP_FLG_NEEDFLUSH;
+}
+
#if GDISP_NEED_CONTROL && GDISP_HARDWARE_CONTROL
- LLDSPEC void gdisp_lld_control(GDisplay *g) {
- switch(g->p.x) {
- case GDISP_CONTROL_POWER:
- if (g->g.Powermode == (powermode_t)g->p.ptr)
- return;
- switch((powermode_t)g->p.ptr) {
- case powerOff:
- case powerSleep:
- case powerDeepSleep:
- acquire_bus(g);
- write_cmd(g, ST7565_DISPLAY_OFF);
- release_bus(g);
- break;
- case powerOn:
- acquire_bus(g);
- write_cmd(g, ST7565_DISPLAY_ON);
- release_bus(g);
- break;
- default:
- return;
- }
- g->g.Powermode = (powermode_t)g->p.ptr;
- return;
-
- case GDISP_CONTROL_ORIENTATION:
- if (g->g.Orientation == (orientation_t)g->p.ptr)
- return;
- switch((orientation_t)g->p.ptr) {
- /* Rotation is handled by the drawing routines */
- case GDISP_ROTATE_0:
- case GDISP_ROTATE_180:
- g->g.Height = GDISP_SCREEN_HEIGHT;
- g->g.Width = GDISP_SCREEN_WIDTH;
- break;
- case GDISP_ROTATE_90:
- case GDISP_ROTATE_270:
- g->g.Height = GDISP_SCREEN_WIDTH;
- g->g.Width = GDISP_SCREEN_HEIGHT;
- break;
- default:
- return;
- }
- g->g.Orientation = (orientation_t)g->p.ptr;
- return;
-
- case GDISP_CONTROL_CONTRAST:
- if ((unsigned)g->p.ptr > 100)
- g->p.ptr = (void *)100;
- acquire_bus(g);
- write_cmd2(g, ST7565_CONTRAST, ((((unsigned)g->p.ptr)<<6)/101) & 0x3F);
- release_bus(g);
- g->g.Contrast = (unsigned)g->p.ptr;
- return;
- }
- }
+LLDSPEC void gdisp_lld_control(GDisplay *g) {
+ switch(g->p.x) {
+ case GDISP_CONTROL_POWER:
+ if (g->g.Powermode == (powermode_t)g->p.ptr)
+ return;
+ switch((powermode_t)g->p.ptr) {
+ case powerOff:
+ case powerSleep:
+ case powerDeepSleep:
+ acquire_bus(g);
+ enter_cmd_mode(g);
+ write_cmd(g, ST7565_DISPLAY_OFF);
+ flush_cmd(g);
+ release_bus(g);
+ break;
+ case powerOn:
+ acquire_bus(g);
+ enter_cmd_mode(g);
+ write_cmd(g, ST7565_DISPLAY_ON);
+ flush_cmd(g);
+ release_bus(g);
+ break;
+ default:
+ return;
+ }
+ g->g.Powermode = (powermode_t)g->p.ptr;
+ return;
+
+ case GDISP_CONTROL_ORIENTATION:
+ if (g->g.Orientation == (orientation_t)g->p.ptr)
+ return;
+ switch((orientation_t)g->p.ptr) {
+ /* Rotation is handled by the drawing routines */
+ case GDISP_ROTATE_0:
+ case GDISP_ROTATE_180:
+ g->g.Height = GDISP_SCREEN_HEIGHT;
+ g->g.Width = GDISP_SCREEN_WIDTH;
+ break;
+ case GDISP_ROTATE_90:
+ case GDISP_ROTATE_270:
+ g->g.Height = GDISP_SCREEN_WIDTH;
+ g->g.Width = GDISP_SCREEN_HEIGHT;
+ break;
+ default:
+ return;
+ }
+ g->g.Orientation = (orientation_t)g->p.ptr;
+ return;
+
+ case GDISP_CONTROL_CONTRAST:
+ g->g.Contrast = (unsigned)g->p.ptr & 63;
+ acquire_bus(g);
+ enter_cmd_mode(g);
+ write_cmd2(g, ST7565_CONTRAST, g->g.Contrast);
+ flush_cmd(g);
+ release_bus(g);
+ return;
+ }
+}
#endif // GDISP_NEED_CONTROL
#endif // GFX_USE_GDISP
diff --git a/keyboards/ergodox/infinity/drivers/gdisp/st7565ergodox/gdisp_lld_config.h b/keyboards/ergodox/infinity/drivers/gdisp/st7565ergodox/gdisp_lld_config.h
index 48587b9e14..2b66a877c8 100644
--- a/keyboards/ergodox/infinity/drivers/gdisp/st7565ergodox/gdisp_lld_config.h
+++ b/keyboards/ergodox/infinity/drivers/gdisp/st7565ergodox/gdisp_lld_config.h
@@ -14,12 +14,13 @@
/* Driver hardware support. */
/*===========================================================================*/
-#define GDISP_HARDWARE_FLUSH TRUE // This controller requires flushing
-#define GDISP_HARDWARE_DRAWPIXEL TRUE
-#define GDISP_HARDWARE_PIXELREAD TRUE
-#define GDISP_HARDWARE_CONTROL TRUE
+#define GDISP_HARDWARE_FLUSH TRUE // This controller requires flushing
+#define GDISP_HARDWARE_DRAWPIXEL TRUE
+#define GDISP_HARDWARE_PIXELREAD TRUE
+#define GDISP_HARDWARE_CONTROL TRUE
+#define GDISP_HARDWARE_BITFILLS TRUE
-#define GDISP_LLD_PIXELFORMAT GDISP_PIXELFORMAT_MONO
+#define GDISP_LLD_PIXELFORMAT GDISP_PIXELFORMAT_MONO
#endif /* GFX_USE_GDISP */
diff --git a/keyboards/ergodox/infinity/drivers/gdisp/st7565ergodox/st7565.h b/keyboards/ergodox/infinity/drivers/gdisp/st7565ergodox/st7565.h
index 48636b33d6..24924ff050 100644
--- a/keyboards/ergodox/infinity/drivers/gdisp/st7565ergodox/st7565.h
+++ b/keyboards/ergodox/infinity/drivers/gdisp/st7565ergodox/st7565.h
@@ -34,4 +34,6 @@
#define ST7565_RESISTOR_RATIO 0x20
#define ST7565_POWER_CONTROL 0x28
+#define ST7565_RESET 0xE2
+
#endif /* _ST7565_H */
diff --git a/keyboards/ergodox/infinity/gfxconf.h b/keyboards/ergodox/infinity/gfxconf.h
index 8caa577b73..45b9f58580 100644
--- a/keyboards/ergodox/infinity/gfxconf.h
+++ b/keyboards/ergodox/infinity/gfxconf.h
@@ -143,7 +143,7 @@
#define GDISP_HARDWARE_DRAWPIXEL TRUE
#define GDISP_HARDWARE_CLEARS FALSE
#define GDISP_HARDWARE_FILLS FALSE
- #define GDISP_HARDWARE_BITFILLS FALSE
+ //#define GDISP_HARDWARE_BITFILLS FALSE
#define GDISP_HARDWARE_SCROLL FALSE
#define GDISP_HARDWARE_PIXELREAD TRUE
#define GDISP_HARDWARE_CONTROL TRUE
diff --git a/keyboards/ergodox/infinity/infinity.c b/keyboards/ergodox/infinity/infinity.c
index 02db67eaf2..62259ed3f6 100644
--- a/keyboards/ergodox/infinity/infinity.c
+++ b/keyboards/ergodox/infinity/infinity.c
@@ -70,10 +70,33 @@ void lcd_backlight_hal_init(void) {
RGB_PORT->PCR[BLUE_PIN] = RGB_MODE;
}
+static uint16_t cie_lightness(uint16_t v) {
+ // The CIE 1931 formula for lightness
+ // Y = luminance (output) 0-1
+ // L = lightness input 0 - 100
+
+ // Y = (L* / 902.3) if L* <= 8
+ // Y = ((L* + 16) / 116)^3 if L* > 8
+
+ float l = 100.0f * (v / 65535.0f);
+ float y = 0.0f;
+ if (l <= 8.0f) {
+ y = l / 902.3;
+ }
+ else {
+ y = ((l + 16.0f) / 116.0f);
+ y = y * y * y;
+ if (y > 1.0f) {
+ y = 1.0f;
+ }
+ }
+ return y * 65535.0f;
+}
+
void lcd_backlight_hal_color(uint16_t r, uint16_t g, uint16_t b) {
- CHANNEL_RED.CnV = r;
- CHANNEL_GREEN.CnV = g;
- CHANNEL_BLUE.CnV = b;
+ CHANNEL_RED.CnV = cie_lightness(r);
+ CHANNEL_GREEN.CnV = cie_lightness(g);
+ CHANNEL_BLUE.CnV = cie_lightness(b);
}
__attribute__ ((weak))
@@ -103,34 +126,48 @@ void matrix_scan_kb(void) {
matrix_scan_user();
}
+__attribute__ ((weak))
void ergodox_board_led_on(void){
}
+__attribute__ ((weak))
void ergodox_right_led_1_on(void){
}
+__attribute__ ((weak))
void ergodox_right_led_2_on(void){
}
+__attribute__ ((weak))
void ergodox_right_led_3_on(void){
}
-void ergodox_right_led_on(uint8_t led){
-}
-
+__attribute__ ((weak))
void ergodox_board_led_off(void){
}
+__attribute__ ((weak))
void ergodox_right_led_1_off(void){
}
+__attribute__ ((weak))
void ergodox_right_led_2_off(void){
}
+__attribute__ ((weak))
void ergodox_right_led_3_off(void){
}
-void ergodox_right_led_off(uint8_t led){
+__attribute__ ((weak))
+void ergodox_right_led_1_set(uint8_t n) {
+}
+
+__attribute__ ((weak))
+void ergodox_right_led_2_set(uint8_t n) {
+}
+
+__attribute__ ((weak))
+void ergodox_right_led_3_set(uint8_t n) {
}
#ifdef ONEHAND_ENABLE
diff --git a/keyboards/ergodox/infinity/infinity.h b/keyboards/ergodox/infinity/infinity.h
index fec9e565cd..73a0f4bf70 100644
--- a/keyboards/ergodox/infinity/infinity.h
+++ b/keyboards/ergodox/infinity/infinity.h
@@ -7,13 +7,38 @@ void ergodox_board_led_on(void);
void ergodox_right_led_1_on(void);
void ergodox_right_led_2_on(void);
void ergodox_right_led_3_on(void);
-void ergodox_right_led_on(uint8_t led);
+
+inline void ergodox_right_led_on(uint8_t led) {
+ switch (led) {
+ case 0:
+ ergodox_right_led_1_on();
+ break;
+ case 1:
+ ergodox_right_led_2_on();
+ break;
+ case 2:
+ ergodox_right_led_3_on();
+ break;
+ }
+}
void ergodox_board_led_off(void);
void ergodox_right_led_1_off(void);
void ergodox_right_led_2_off(void);
void ergodox_right_led_3_off(void);
-void ergodox_right_led_off(uint8_t led);
+inline void ergodox_right_led_off(uint8_t led) {
+ switch (led) {
+ case 0:
+ ergodox_right_led_1_off();
+ break;
+ case 1:
+ ergodox_right_led_2_off();
+ break;
+ case 2:
+ ergodox_right_led_3_off();
+ break;
+ }
+}
inline void ergodox_led_all_on(void)
{
@@ -31,36 +56,22 @@ inline void ergodox_led_all_off(void)
ergodox_right_led_3_off();
}
-inline void ergodox_right_led_1_set(uint8_t n){
- if (n) {
- ergodox_right_led_1_on();
- } else {
- ergodox_right_led_1_off();
- }
-}
-
-inline void ergodox_right_led_2_set(uint8_t n){
- if (n) {
- ergodox_right_led_2_on();
- } else {
- ergodox_right_led_2_off();
- }
-}
-
-inline void ergodox_right_led_3_set(uint8_t n){
- if (n) {
- ergodox_right_led_3_on();
- } else {
- ergodox_right_led_3_off();
- }
-}
+void ergodox_right_led_1_set(uint8_t n);
+void ergodox_right_led_2_set(uint8_t n);
+void ergodox_right_led_3_set(uint8_t n);
inline void ergodox_right_led_set(uint8_t led, uint8_t n){
- if (n) {
- ergodox_right_led_on(led);
- } else {
- ergodox_right_led_off(led);
- }
+ switch (led) {
+ case 0:
+ ergodox_right_led_1_set(n);
+ break;
+ case 1:
+ ergodox_right_led_2_set(n);
+ break;
+ case 2:
+ ergodox_right_led_3_set(n);
+ break;
+ }
}
inline void ergodox_led_all_set(uint8_t n) {
diff --git a/keyboards/ergodox/infinity/matrix.c b/keyboards/ergodox/infinity/matrix.c
index 1fda904849..3364f8c905 100644
--- a/keyboards/ergodox/infinity/matrix.c
+++ b/keyboards/ergodox/infinity/matrix.c
@@ -24,6 +24,7 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
#include "print.h"
#include "debug.h"
#include "matrix.h"
+#include "serial_link/system/serial_link.h"
/*
diff --git a/keyboards/ergodox/infinity/rules.mk b/keyboards/ergodox/infinity/rules.mk
index 473a6dfec6..9e6170d89a 100644
--- a/keyboards/ergodox/infinity/rules.mk
+++ b/keyboards/ergodox/infinity/rules.mk
@@ -1,6 +1,7 @@
# project specific files
SRC = matrix.c \
- led.c
+ led.c \
+ animations.c
## chip/board settings
# - the next two should match the directories in
@@ -59,21 +60,17 @@ OPT_DEFS += -DCORTEX_VTOR_INIT=0x00002000
#
CUSTOM_MATRIX ?= yes # Custom matrix file
SERIAL_LINK_ENABLE = yes
-VISUALIZER_ENABLE ?= no #temporarily disabled to make everything compile
+VISUALIZER_ENABLE ?= yes
LCD_ENABLE ?= yes
-LED_ENABLE ?= yes
+LED_ENABLE ?= no
LCD_BACKLIGHT_ENABLE ?= yes
MIDI_ENABLE = no
RGBLIGHT_ENABLE = no
-ifndef QUANTUM_DIR
- include ../../../Makefile
-endif
-
ifdef LCD_ENABLE
include $(SUBPROJECT_PATH)/drivers/gdisp/st7565ergodox/driver.mk
endif
ifdef LED_ENABLE
include $(SUBPROJECT_PATH)/drivers/gdisp/IS31FL3731C/driver.mk
-endif
+endif \ No newline at end of file
diff --git a/keyboards/ergodox/infinity/simple_visualizer.h b/keyboards/ergodox/infinity/simple_visualizer.h
new file mode 100644
index 0000000000..ded8a3222e
--- /dev/null
+++ b/keyboards/ergodox/infinity/simple_visualizer.h
@@ -0,0 +1,123 @@
+/* Copyright 2017 Fred Sundvik
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#ifndef KEYBOARDS_ERGODOX_INFINITY_SIMPLE_VISUALIZER_H_
+#define KEYBOARDS_ERGODOX_INFINITY_SIMPLE_VISUALIZER_H_
+
+// Currently we are assuming that both the backlight and LCD are enabled
+// But it's entirely possible to write a custom visualizer that use only
+// one of them
+#ifndef LCD_BACKLIGHT_ENABLE
+#error This visualizer needs that LCD backlight is enabled
+#endif
+
+#ifndef LCD_ENABLE
+#error This visualizer needs that LCD is enabled
+#endif
+
+#include "visualizer.h"
+#include "visualizer_keyframes.h"
+#include "lcd_keyframes.h"
+#include "lcd_backlight_keyframes.h"
+#include "system/serial_link.h"
+#include "led.h"
+#include "animations.h"
+
+static const uint32_t logo_background_color = LCD_COLOR(0x00, 0x00, 0xFF);
+static const uint32_t initial_color = LCD_COLOR(0, 0, 0);
+
+static bool initial_update = true;
+
+// Feel free to modify the animations below, or even add new ones if needed
+
+static keyframe_animation_t lcd_layer_display = {
+ .num_frames = 1,
+ .loop = false,
+ .frame_lengths = {gfxMillisecondsToTicks(0)},
+ .frame_functions = {lcd_keyframe_display_layer_and_led_states}
+};
+
+// The color animation animates the LCD color when you change layers
+static keyframe_animation_t color_animation = {
+ .num_frames = 2,
+ .loop = false,
+ // Note that there's a 200 ms no-operation frame,
+ // this prevents the color from changing when activating the layer
+ // momentarily
+ .frame_lengths = {gfxMillisecondsToTicks(200), gfxMillisecondsToTicks(500)},
+ .frame_functions = {keyframe_no_operation, backlight_keyframe_animate_color},
+};
+
+void initialize_user_visualizer(visualizer_state_t* state) {
+ // The brightness will be dynamically adjustable in the future
+ // But for now, change it here.
+ lcd_backlight_brightness(130);
+ state->current_lcd_color = initial_color;
+ state->target_lcd_color = logo_background_color;
+ initial_update = true;
+ start_keyframe_animation(&default_startup_animation);
+}
+
+
+// This function should be implemented by the keymap visualizer
+// Don't change anything else than state->target_lcd_color and state->layer_text as that's the only thing
+// that the simple_visualizer assumes that you are updating
+// Also make sure that the buffer passed to state->layer_text remains valid until the previous animation is
+// stopped. This can be done by either double buffering it or by using constant strings
+static void get_visualizer_layer_and_color(visualizer_state_t* state);
+
+void update_user_visualizer_state(visualizer_state_t* state, visualizer_keyboard_status_t* prev_status) {
+ // Add more tests, change the colors and layer texts here
+ // Usually you want to check the high bits (higher layers first)
+ // because that's the order layers are processed for keypresses
+ // You can for check for example:
+ // state->status.layer
+ // state->status.default_layer
+ // state->status.leds (see led.h for available statuses)
+
+ uint32_t prev_color = state->target_lcd_color;
+ const char* prev_layer_text = state->layer_text;
+
+ get_visualizer_layer_and_color(state);
+
+ if (initial_update || prev_color != state->target_lcd_color) {
+ start_keyframe_animation(&color_animation);
+ }
+
+ if (initial_update || prev_layer_text != state->layer_text) {
+ start_keyframe_animation(&lcd_layer_display);
+ }
+ // You can also stop existing animations, and start your custom ones here
+ // remember that you should normally have only one animation for the LCD
+ // and one for the background. But you can also combine them if you want.
+}
+
+void user_visualizer_suspend(visualizer_state_t* state) {
+ state->layer_text = "Suspending...";
+ uint8_t hue = LCD_HUE(state->current_lcd_color);
+ uint8_t sat = LCD_SAT(state->current_lcd_color);
+ state->target_lcd_color = LCD_COLOR(hue, sat, 0);
+ start_keyframe_animation(&default_suspend_animation);
+}
+
+void user_visualizer_resume(visualizer_state_t* state) {
+ state->current_lcd_color = initial_color;
+ state->target_lcd_color = logo_background_color;
+ initial_update = true;
+ start_keyframe_animation(&default_startup_animation);
+}
+
+#endif /* KEYBOARDS_ERGODOX_INFINITY_SIMPLE_VISUALIZER_H_ */
diff --git a/keyboards/ergodox/infinity/visualizer.c b/keyboards/ergodox/infinity/visualizer.c
new file mode 100644
index 0000000000..a4b09a34d0
--- /dev/null
+++ b/keyboards/ergodox/infinity/visualizer.c
@@ -0,0 +1,329 @@
+/*
+Copyright 2016 Fred Sundvik <fsundvik@gmail.com>
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program. If not, see <http://www.gnu.org/licenses/>.
+*/
+
+// Currently we are assuming that both the backlight and LCD are enabled
+// But it's entirely possible to write a custom visualizer that use only
+// one of them
+#ifndef LCD_BACKLIGHT_ENABLE
+#error This visualizer needs that LCD backlight is enabled
+#endif
+
+#ifndef LCD_ENABLE
+#error This visualizer needs that LCD is enabled
+#endif
+
+#include "visualizer.h"
+#include "visualizer_keyframes.h"
+#include "lcd_keyframes.h"
+#include "lcd_backlight_keyframes.h"
+#include "system/serial_link.h"
+#include "animations.h"
+
+static const uint32_t logo_background_color = LCD_COLOR(0x00, 0x00, 0xFF);
+static const uint32_t initial_color = LCD_COLOR(0, 0, 0);
+
+static const uint32_t led_emulation_colors[4] = {
+ LCD_COLOR(0, 0, 0),
+ LCD_COLOR(255, 255, 255),
+ LCD_COLOR(84, 255, 255),
+ LCD_COLOR(168, 255, 255),
+};
+
+static uint32_t next_led_target_color = 0;
+
+typedef enum {
+ LCD_STATE_INITIAL,
+ LCD_STATE_LAYER_BITMAP,
+ LCD_STATE_BITMAP_AND_LEDS,
+} lcd_state_t;
+
+static lcd_state_t lcd_state = LCD_STATE_INITIAL;
+
+typedef struct {
+ uint8_t led_on;
+ uint8_t led1;
+ uint8_t led2;
+ uint8_t led3;
+} visualizer_user_data_t;
+
+// Don't access from visualization function, use the visualizer state instead
+static visualizer_user_data_t user_data_keyboard = {
+ .led_on = 0,
+ .led1 = LED_BRIGHTNESS_HI,
+ .led2 = LED_BRIGHTNESS_HI,
+ .led3 = LED_BRIGHTNESS_HI,
+};
+
+_Static_assert(sizeof(visualizer_user_data_t) <= VISUALIZER_USER_DATA_SIZE,
+ "Please increase the VISUALIZER_USER_DATA_SIZE");
+
+// Feel free to modify the animations below, or even add new ones if needed
+
+
+// The color animation animates the LCD color when you change layers
+static keyframe_animation_t one_led_color = {
+ .num_frames = 1,
+ .loop = false,
+ .frame_lengths = {gfxMillisecondsToTicks(0)},
+ .frame_functions = {backlight_keyframe_set_color},
+};
+
+bool swap_led_target_color(keyframe_animation_t* animation, visualizer_state_t* state) {
+ uint32_t temp = next_led_target_color;
+ next_led_target_color = state->target_lcd_color;
+ state->target_lcd_color = temp;
+ return false;
+}
+
+// The color animation animates the LCD color when you change layers
+static keyframe_animation_t two_led_colors = {
+ .num_frames = 2,
+ .loop = true,
+ .frame_lengths = {gfxMillisecondsToTicks(1000), gfxMillisecondsToTicks(0)},
+ .frame_functions = {backlight_keyframe_set_color, swap_led_target_color},
+};
+
+// The LCD animation alternates between the layer name display and a
+// bitmap that displays all active layers
+static keyframe_animation_t lcd_bitmap_animation = {
+ .num_frames = 1,
+ .loop = false,
+ .frame_lengths = {gfxMillisecondsToTicks(0)},
+ .frame_functions = {lcd_keyframe_display_layer_bitmap},
+};
+
+static keyframe_animation_t lcd_bitmap_leds_animation = {
+ .num_frames = 2,
+ .loop = true,
+ .frame_lengths = {gfxMillisecondsToTicks(2000), gfxMillisecondsToTicks(2000)},
+ .frame_functions = {lcd_keyframe_display_layer_bitmap, lcd_keyframe_display_led_states},
+};
+
+void initialize_user_visualizer(visualizer_state_t* state) {
+ // The brightness will be dynamically adjustable in the future
+ // But for now, change it here.
+ lcd_backlight_brightness(130);
+ state->current_lcd_color = initial_color;
+ state->target_lcd_color = logo_background_color;
+ lcd_state = LCD_STATE_INITIAL;
+ start_keyframe_animation(&default_startup_animation);
+}
+
+inline bool is_led_on(visualizer_user_data_t* user_data, uint8_t num) {
+ return user_data->led_on & (1u << num);
+}
+
+static uint8_t get_led_index_master(visualizer_user_data_t* user_data) {
+ for (int i=0; i < 3; i++) {
+ if (is_led_on(user_data, i)) {
+ return i + 1;
+ }
+ }
+ return 0;
+}
+
+static uint8_t get_led_index_slave(visualizer_user_data_t* user_data) {
+ uint8_t master_index = get_led_index_master(user_data);
+ if (master_index!=0) {
+ for (int i=master_index; i < 3; i++) {
+ if (is_led_on(user_data, i)) {
+ return i + 1;
+ }
+ }
+ }
+
+ return 0;
+}
+
+static uint8_t get_secondary_led_index(visualizer_user_data_t* user_data) {
+ if (is_led_on(user_data, 0) &&
+ is_led_on(user_data, 1) &&
+ is_led_on(user_data, 2)) {
+ return 3;
+ }
+ return 0;
+}
+
+static uint8_t get_brightness(visualizer_user_data_t* user_data, uint8_t index) {
+ switch (index) {
+ case 1:
+ return user_data->led1;
+ case 2:
+ return user_data->led2;
+ case 3:
+ return user_data->led3;
+ }
+ return 0;
+}
+
+static void update_emulated_leds(visualizer_state_t* state, visualizer_keyboard_status_t* prev_status) {
+ visualizer_user_data_t* user_data_new = (visualizer_user_data_t*)state->status.user_data;
+ visualizer_user_data_t* user_data_old = (visualizer_user_data_t*)prev_status->user_data;
+
+ uint8_t new_index;
+ uint8_t old_index;
+
+ if (is_serial_link_master()) {
+ new_index = get_led_index_master(user_data_new);
+ old_index = get_led_index_master(user_data_old);
+ }
+ else {
+ new_index = get_led_index_slave(user_data_new);
+ old_index = get_led_index_slave(user_data_old);
+ }
+ uint8_t new_secondary_index = get_secondary_led_index(user_data_new);
+ uint8_t old_secondary_index = get_secondary_led_index(user_data_old);
+
+ uint8_t old_brightness = get_brightness(user_data_old, old_index);
+ uint8_t new_brightness = get_brightness(user_data_new, new_index);
+
+ uint8_t old_secondary_brightness = get_brightness(user_data_old, old_secondary_index);
+ uint8_t new_secondary_brightness = get_brightness(user_data_new, new_secondary_index);
+
+ if (lcd_state == LCD_STATE_INITIAL ||
+ new_index != old_index ||
+ new_secondary_index != old_secondary_index ||
+ new_brightness != old_brightness ||
+ new_secondary_brightness != old_secondary_brightness) {
+
+ if (new_secondary_index != 0) {
+ state->target_lcd_color = change_lcd_color_intensity(
+ led_emulation_colors[new_index], new_brightness);
+ next_led_target_color = change_lcd_color_intensity(
+ led_emulation_colors[new_secondary_index], new_secondary_brightness);
+
+ stop_keyframe_animation(&one_led_color);
+ start_keyframe_animation(&two_led_colors);
+ } else {
+ state->target_lcd_color = change_lcd_color_intensity(
+ led_emulation_colors[new_index], new_brightness);
+ stop_keyframe_animation(&two_led_colors);
+ start_keyframe_animation(&one_led_color);
+ }
+ }
+}
+
+static void update_lcd_text(visualizer_state_t* state, visualizer_keyboard_status_t* prev_status) {
+ if (state->status.leds) {
+ if (lcd_state != LCD_STATE_BITMAP_AND_LEDS ||
+ state->status.leds != prev_status->leds ||
+ state->status.layer != prev_status->layer ||
+ state->status.default_layer != prev_status->default_layer) {
+
+ // NOTE: that it doesn't matter if the animation isn't playing, stop will do nothing in that case
+ stop_keyframe_animation(&lcd_bitmap_animation);
+
+ lcd_state = LCD_STATE_BITMAP_AND_LEDS;
+ // For information:
+ // The logic in this function makes sure that this doesn't happen, but if you call start on an
+ // animation that is already playing it will be restarted.
+ start_keyframe_animation(&lcd_bitmap_leds_animation);
+ }
+ } else {
+ if (lcd_state != LCD_STATE_LAYER_BITMAP ||
+ state->status.layer != prev_status->layer ||
+ state->status.default_layer != prev_status->default_layer) {
+
+ stop_keyframe_animation(&lcd_bitmap_leds_animation);
+
+ lcd_state = LCD_STATE_LAYER_BITMAP;
+ start_keyframe_animation(&lcd_bitmap_animation);
+ }
+ }
+}
+
+void update_user_visualizer_state(visualizer_state_t* state, visualizer_keyboard_status_t* prev_status) {
+ // Check the status here to start and stop animations
+ // You might have to save some state, like the current animation here so that you can start the right
+ // This function is called every time the status changes
+
+ // NOTE that this is called from the visualizer thread, so don't access anything else outside the status
+ // This is also important because the slave won't have access to the active layer for example outside the
+ // status.
+
+ update_emulated_leds(state, prev_status);
+ update_lcd_text(state, prev_status);
+
+}
+
+void user_visualizer_suspend(visualizer_state_t* state) {
+ state->layer_text = "Suspending...";
+ uint8_t hue = LCD_HUE(state->current_lcd_color);
+ uint8_t sat = LCD_SAT(state->current_lcd_color);
+ state->target_lcd_color = LCD_COLOR(hue, sat, 0);
+ start_keyframe_animation(&default_suspend_animation);
+}
+
+void user_visualizer_resume(visualizer_state_t* state) {
+ state->current_lcd_color = initial_color;
+ state->target_lcd_color = logo_background_color;
+ lcd_state = LCD_STATE_INITIAL;
+ start_keyframe_animation(&default_startup_animation);
+}
+
+void ergodox_board_led_on(void){
+ // No board led support
+}
+
+void ergodox_right_led_1_on(void){
+ user_data_keyboard.led_on |= (1u << 0);
+ visualizer_set_user_data(&user_data_keyboard);
+}
+
+void ergodox_right_led_2_on(void){
+ user_data_keyboard.led_on |= (1u << 1);
+ visualizer_set_user_data(&user_data_keyboard);
+}
+
+void ergodox_right_led_3_on(void){
+ user_data_keyboard.led_on |= (1u << 2);
+ visualizer_set_user_data(&user_data_keyboard);
+}
+
+void ergodox_board_led_off(void){
+ // No board led support
+}
+
+void ergodox_right_led_1_off(void){
+ user_data_keyboard.led_on &= ~(1u << 0);
+ visualizer_set_user_data(&user_data_keyboard);
+}
+
+void ergodox_right_led_2_off(void){
+ user_data_keyboard.led_on &= ~(1u << 1);
+ visualizer_set_user_data(&user_data_keyboard);
+}
+
+void ergodox_right_led_3_off(void){
+ user_data_keyboard.led_on &= ~(1u << 2);
+ visualizer_set_user_data(&user_data_keyboard);
+}
+
+void ergodox_right_led_1_set(uint8_t n) {
+ user_data_keyboard.led1 = n;
+ visualizer_set_user_data(&user_data_keyboard);
+}
+
+void ergodox_right_led_2_set(uint8_t n) {
+ user_data_keyboard.led2 = n;
+ visualizer_set_user_data(&user_data_keyboard);
+}
+
+void ergodox_right_led_3_set(uint8_t n) {
+ user_data_keyboard.led3 = n;
+ visualizer_set_user_data(&user_data_keyboard);
+}