diff options
Diffstat (limited to 'keyboards/enviousdesign/mcro/readme.md')
| -rw-r--r-- | keyboards/enviousdesign/mcro/readme.md | 30 |
1 files changed, 30 insertions, 0 deletions
diff --git a/keyboards/enviousdesign/mcro/readme.md b/keyboards/enviousdesign/mcro/readme.md new file mode 100644 index 0000000000..378fab8c3e --- /dev/null +++ b/keyboards/enviousdesign/mcro/readme.md @@ -0,0 +1,30 @@ +# EnvKB MCRO + + + +A small 12 Key macro pad for various uses + +* Keyboard Maintainer: [Envious-Data](https://github.com/envious-data) +* Hardware Supported: EnvKB MCRO (Pi Pico) +* Hardware Availability: [GitHub](https://github.com/Envious-Data/Env-MCRO) + +Make example for this keyboard (after setting up your build environment): + + make enviousdesign/mcro:default + +Flashing example for this keyboard: + + make enviousdesign/mcro:default:flash + +See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). + +## Bootloader + +Enter the bootloader in 3 ways: + +* **Bootmagic reset**: Hold down the top left key and plug in the keyboard. This will also clear the emulated EEPROM, so it is a good first step if the keyboard is misbehaving. +* **Physical reset**: Hold down the `BOOTSEL` button on the Pi Pico, then either plug the board in or press the `RESET` button. +* **Keycode in layout**: There is no key mapped to `QK_BOOT` in the pre-created keymaps, but you may assign this key in any keymaps you create. + +After entering the bootloader through one of the three methods above, the keyboard will appear as a USB mass storage device named `RPI-RP2`. If the CLI is unable to find this device, the compiled `.uf2` file can be manually copied to it. The keyboard will reboot on completion with the new firmware loaded. + |