1 files changed, 74 insertions, 0 deletions
diff --git a/keyboards/ebastler/isometria_75/rev1/config.h b/keyboards/ebastler/isometria_75/rev1/config.h
new file mode 100644
index 0000000000..038fa18ac1
--- /dev/null
+++ b/keyboards/ebastler/isometria_75/rev1/config.h
@@ -0,0 +1,74 @@
+/*
+Copyright 2020 Moritz Plattner
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#pragma once
+
+#include "config_common.h"
+
+/* USB Device descriptor parameter */
+#define VENDOR_ID       0x6562 // "eb"
+#define PRODUCT_ID      0x1337
+#define DEVICE_VER      0x0001
+#define MANUFACTURER    ebastler
+#define PRODUCT        isometria 75
+
+/* key matrix size */
+#define MATRIX_ROWS 6
+#define MATRIX_COLS 16
+
+#define MATRIX_ROW_PINS { A15, B4, B5, B6, B7, B8}
+#define MATRIX_COL_PINS { B12, B13, B14, B15, A8, A10, A13, A14, B9, C13, F0, F1, A0, B2, B10, B11 }
+#define UNUSED_PINS
+
+/* COL2ROW, ROW2COL*/
+#define DIODE_DIRECTION COL2ROW
+#define DEBOUNCE 5
+
+/* Backlight */
+#define BACKLIGHT_PIN A9
+#define BACKLIGHT_BREATHING
+#define BACKLIGHT_PWM_DRIVER PWMD1
+#define BACKLIGHT_PWM_CHANNEL 2
+#define BACKLIGHT_PAL_MODE 2
+#define BACKLIGHT_LEVELS 5
+#define BACKLIGHT_ON_STATE 1
+#define BACKLIGHT_PWM_OUTPUT_FREQUENCY 1000 // Increases backlight PWM freq if compiled with an unmerged PR. Does no harm without it.
+
+/* Underglow */
+#define RGB_DI_PIN B3
+#define RGBLED_NUM 17
+#define WS2812_PWM_DRIVER PWMD2
+#define WS2812_PWM_CHANNEL 2
+#define WS2812_PWM_PAL_MODE 2
+#define WS2812_DMA_STREAM STM32_DMA1_STREAM2
+#define WS2812_DMA_CHANNEL 2
+#define RGBLIGHT_SLEEP
+#define RGBLIGHT_EFFECT_BREATHING
+#define RGBLIGHT_EFFECT_RAINBOW_MOOD
+#define RGBLIGHT_EFFECT_RAINBOW_SWIRL
+
+
+/* Rotary encoder - set the resolution fitting your encoder.
+Most will need a value of 4. If 1 encoder click results in 2 keycodes sent
+increase the value. If you need 2 clicks for 1 keycode, decrease*/
+#define ENCODER_RESOLUTION 2
+#define ENCODERS_PAD_A { C15 }
+#define ENCODERS_PAD_B { C14 }
+#define TAP_CODE_DELAY 10
+
+/* ADC - will be used for battery monitoring once BT support is added */
+/* #define ADC_PIN B0 */