summaryrefslogtreecommitdiff
path: root/keyboards/durgod/k320/readme.md
diff options
context:
space:
mode:
Diffstat (limited to 'keyboards/durgod/k320/readme.md')
-rw-r--r--keyboards/durgod/k320/readme.md8
1 files changed, 3 insertions, 5 deletions
diff --git a/keyboards/durgod/k320/readme.md b/keyboards/durgod/k320/readme.md
index 839a2c74ab..1150294354 100644
--- a/keyboards/durgod/k320/readme.md
+++ b/keyboards/durgod/k320/readme.md
@@ -32,9 +32,8 @@ For first Flashing from initial Stock's Firmware
- Using DFUseDemo.exe from ST's STSW-STM32080: https://www.st.com/en/development-tools/stsw-stm32080.html
- Using dfu-util (thanks to [tylert](https://github.com/tylert) for instructions!):
-
- dfu-util --list
- dfu-util --alt 0 --dfuse-address 0x08000000 --upload ${OLD_STOCK_BIN}
+ dfu-util --list
+ dfu-util --alt 0 --dfuse-address 0x08000000 --upload ${OLD_STOCK_BIN}
2. Flash the QMK Firmware Image.
- Put board into Bootloader mode, using the same method as when backing up the original Firmware (above)
@@ -43,8 +42,7 @@ For first Flashing from initial Stock's Firmware
- Using DFuseDemo.exe if STTub30 driver is used.
- Using dfu-util:
-
- dfu-util --alt 0 --dfuse-address 0x08000000 --upload ${NEW_QMK_BIN}
+ dfu-util --alt 0 --dfuse-address 0x08000000 --download ${NEW_QMK_BIN}
You can short Boot0 to Vdd by shorting R21 to C27 on the sides closest to the processor, as shown: