diff options
Diffstat (limited to 'keyboards/doio/kb16/readme.md')
| -rw-r--r-- | keyboards/doio/kb16/readme.md | 25 |
1 files changed, 6 insertions, 19 deletions
diff --git a/keyboards/doio/kb16/readme.md b/keyboards/doio/kb16/readme.md index 8667da41d5..dd3007ff4f 100644 --- a/keyboards/doio/kb16/readme.md +++ b/keyboards/doio/kb16/readme.md @@ -1,26 +1,13 @@ # KB16-01 - +#### This keyboard have 2 revision, so before you need to write your own firmware code. Please read it carefully, or you could accident bricked your keeb after that. -A macropad that have 16-key keyboard made by DOIO, which controlled by an Atmega32u4 chipset. The keyboard features per-key RGB, 3 encoder and an OLED screen for displaying useful information. +- **Revision 1**: Using ATMEGA32U4. -* Keyboard Maintainer: [HorrorTroll](https://github.com/HorrorTroll) -* Hardware Supported: Atmega32u4 +When you try to go bootloader mode, QMK Toolbox will showing this message `Atmel DFU device connected (libusb0): Atmel Corp. ATmega32U4 (03EB:2FF4:0000)`. So please compile Revision 1 and flash after that. -Make example for this keyboard (after setting up your build environment): +Oh, and one more thing. As for the Bongo Cat on OLED screen, due to small flash size that ATMEGA32U4 support. It need to be disable Mouse key support. - make doio/kb16/rev1:default +- **Revision 2**: Using APM32F103CBT6 (clone STM32F103CBT6). -Flashing example for this keyboard: - - make doio/kb16/rev1:default:flash - -See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). - -## Bootloader - -Enter the bootloader in 3 ways: - -* **Bootmagic reset**: Hold down the key at (0,0) in the matrix (1! key) and plug in the keyboard -* **Physical reset button**: Short press the button under Spacebar keycap to enter the Bootloader and flash the firmware -* **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available +When you try to go bootloader mode, QMK Toolbox will showing this message `STM32Duino device connected: LeafLabs Maple 003 (1EAF:0003:0201)`. So please compile Revision 2 and flash after that. |