summaryrefslogtreecommitdiff
path: root/keyboards/dichotemy/dichotemy.c
diff options
context:
space:
mode:
Diffstat (limited to 'keyboards/dichotemy/dichotemy.c')
-rw-r--r--keyboards/dichotemy/dichotemy.c86
1 files changed, 0 insertions, 86 deletions
diff --git a/keyboards/dichotemy/dichotemy.c b/keyboards/dichotemy/dichotemy.c
deleted file mode 100644
index 080c2654cd..0000000000
--- a/keyboards/dichotemy/dichotemy.c
+++ /dev/null
@@ -1,86 +0,0 @@
-#include "dichotemy.h"
-#include "pointing_device.h"
-#include "report.h"
-
-void uart_init(void) {
- SERIAL_UART_INIT();
-}
-
-void pointing_device_task(void){
- report_mouse_t currentReport = {};
- SERIAL_UART_INIT();
- uint32_t timeout = 0;
-
- //the m character requests the RF slave to send the mouse report
- SERIAL_UART_DATA = 'm';
-
- //trust the external inputs completely, erase old data
- uint8_t uart_data[5] = {0};
-
- //there are 10 bytes corresponding to 10 columns, and an end byte
- for (uint8_t i = 0; i < 5; i++) {
- //wait for the serial data, timeout if it's been too long
- //this only happened in testing with a loose wire, but does no
- //harm to leave it in here
- while(!SERIAL_UART_RXD_PRESENT){
- timeout++;
- if (timeout > 10000){
- break;
- }
- }
- uart_data[i] = SERIAL_UART_DATA;
- }
-
- //check for the end packet, bits 1-4 are movement and scroll
- //but bit 5 has bits 0-3 for the scroll button state
- //(1000 if pressed, 0000 if not) and bits 4-7 are always 1
- //We can use this to verify the report sent properly.
- if (uart_data[4] == 0x0F || uart_data[4] == 0x8F)
- {
- currentReport = pointing_device_get_report();
- //shifting and transferring the info to the mouse report varaible
- //mouseReport.x = 127 max -127 min
- currentReport.x = uart_data[0];
- //mouseReport.y = 127 max -127 min
- currentReport.y = uart_data[1];
- //mouseReport.v = 127 max -127 min (scroll vertical)
- currentReport.v = uart_data[2];
- //mouseReport.h = 127 max -127 min (scroll horizontal)
- currentReport.h = uart_data[3];
- //mouseReport.buttons = 0x31 max (bitmask for mouse buttons 1-5) 0x00 min
- //mouse buttons 1 and 2 are handled by the keymap, but not 3
- if (uart_data[4] == 0x0F) { //then 3 is not pressed
- currentReport.buttons &= ~MOUSE_BTN3; //MOUSE_BTN3 is def in report.h
- } else { //3 must be pressed
- currentReport.buttons |= MOUSE_BTN3;
- }
- pointing_device_set_report(currentReport);
- }
- pointing_device_send();
-}
-
-void led_init(void) {
- DDRD |= (1<<1);
- PORTD |= (1<<1);
- DDRF |= (1<<4) | (1<<5);
- PORTF |= (1<<4) | (1<<5);
-}
-
-
-void matrix_init_kb(void) {
- // put your keyboard start-up code here
- // runs once when the firmware starts up
- matrix_init_user();
- uart_init();
- led_init();
-}
-
-void matrix_scan_kb(void) {
- // put your looping keyboard code here
- // runs every cycle (a lot)
- matrix_scan_user();
-}
-
-void led_set_kb(uint8_t usb_led) {
-
-}