diff options
Diffstat (limited to 'keyboards/crkbd')
24 files changed, 1270 insertions, 22 deletions
diff --git a/keyboards/crkbd/keymaps/drashna/config.h b/keyboards/crkbd/keymaps/drashna/config.h index 0b035ba3c3..724d52c38c 100644 --- a/keyboards/crkbd/keymaps/drashna/config.h +++ b/keyboards/crkbd/keymaps/drashna/config.h @@ -48,17 +48,24 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #ifdef RGB_MATRIX_ENABLE # define RGB_MATRIX_KEYPRESSES // reacts to keypresses # define RGB_DISABLE_WHEN_USB_SUSPENDED true // turn off effects when suspended +# define RGB_MATRIX_FRAMEBUFFER_EFFECTS +// # define DISABLE_RGB_MATRIX_ALPHAS_MODS # define DISABLE_RGB_MATRIX_GRADIENT_UP_DOWN +# define DISABLE_RGB_MATRIX_BREATHING # define DISABLE_RGB_MATRIX_CYCLE_ALL +# define DISABLE_RGB_MATRIX_CYCLE_LEFT_RIGHT # define DISABLE_RGB_MATRIX_CYCLE_UP_DOWN +// # define DISABLE_RGB_MATRIX_CYCLE_OUT_IN +// # define DISABLE_RGB_MATRIX_CYCLE_OUT_IN_DUAL # define DISABLE_RGB_MATRIX_RAINBOW_MOVING_CHEVRON # define DISABLE_RGB_MATRIX_DUAL_BEACON # define DISABLE_RGB_MATRIX_RAINBOW_BEACON # define DISABLE_RGB_MATRIX_RAINBOW_PINWHEELS -// #define DISABLE_RGB_MATRIX_RAINDROPS -// #define DISABLE_RGB_MATRIX_JELLYBEAN_RAINDROPS -# define DISABLE_RGB_MATRIX_DIGITAL_RAIN +// # define DISABLE_RGB_MATRIX_RAINDROPS +// # define DISABLE_RGB_MATRIX_JELLYBEAN_RAINDROPS +// # define DISABLE_RGB_MATRIX_TYPING_HEATMAP +// # define DISABLE_RGB_MATRIX_DIGITAL_RAIN # define DISABLE_RGB_MATRIX_SOLID_REACTIVE # define DISABLE_RGB_MATRIX_SOLID_REACTIVE_SIMPLE # define DISABLE_RGB_MATRIX_SOLID_REACTIVE_WIDE @@ -67,8 +74,11 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. # define DISABLE_RGB_MATRIX_SOLID_REACTIVE_MULTICROSS # define DISABLE_RGB_MATRIX_SOLID_REACTIVE_NEXUS # define DISABLE_RGB_MATRIX_SOLID_REACTIVE_MULTINEXUS +# define DISABLE_RGB_MATRIX_SPLASH +// # define DISABLE_RGB_MATRIX_MULTISPLASH # define DISABLE_RGB_MATRIX_SOLID_SPLASH # define DISABLE_RGB_MATRIX_SOLID_MULTISPLASH +#endif #ifdef AUDIO_ENABLE # define B6_AUDIO diff --git a/keyboards/crkbd/keymaps/drashna/keymap.c b/keyboards/crkbd/keymaps/drashna/keymap.c index 3eea7af9f9..af0bc0d9a7 100644 --- a/keyboards/crkbd/keymaps/drashna/keymap.c +++ b/keyboards/crkbd/keymaps/drashna/keymap.c @@ -20,9 +20,9 @@ enum crkbd_keycodes { ) \ LAYOUT_wrapper( \ KC_ESC, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, KC_MINS, \ - KC_TAB, ALT_T(K11), K12, K13, K14, K15, K16, K17, K18, K19, K1A, RGUI_T(KC_QUOT), \ + KC_TAB, ALT_T(K11), K12, K13, K14, K15, K16, K17, K18, K19, K1A, KC_QUOT, \ OS_LSFT, CTL_T(K21), K22, K23, K24, K25, K26, K27, K28, K29, RCTL_T(K2A), OS_RSFT, \ - LT(_LOWER,KC_GRV), KC_SPC, KC_BSPC, KC_DEL, KC_ENT, RAISE \ + KC_GRV, KC_SPC, BK_LWER, DL_RAIS, KC_ENT, OS_RGUI \ ) #define LAYOUT_crkbd_base_wrapper(...) LAYOUT_crkbd_base(__VA_ARGS__) @@ -100,7 +100,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { KC_MAKE, _________________ADJUST_L1_________________, _________________ADJUST_R1_________________, KC_RESET, VRSN, _________________ADJUST_L2_________________, _________________ADJUST_R2_________________, EEP_RST, _______, _________________ADJUST_L3_________________, _________________ADJUST_R3_________________, KC_MPLY, - _______, _______, _______, KC_NUKE, TG_MODS, _______ + _______, KC_NUKE, _______, _______, TG_MODS, _______ ) }; @@ -156,6 +156,8 @@ void add_keylog(uint16_t keycode) { if (keycode < 60) { keylog_str[0] = code_to_name[keycode]; } + keylog_str[KEYLOG_LEN] = 0; + log_timer = timer_read(); } @@ -267,3 +269,61 @@ uint16_t get_tapping_term(uint16_t keycode) { return TAPPING_TERM; } } + +#ifdef RGB_MATRIX_ENABLE + +void suspend_power_down_keymap(void) { + rgb_matrix_set_suspend_state(true); +} + +void suspend_wakeup_init_keymap(void) { + rgb_matrix_set_suspend_state(false); +} + +void rgb_matrix_indicators_user(void) { + if ( userspace_config.rgb_layer_change && +#ifdef RGB_DISABLE_WHEN_USB_SUSPENDED + !g_suspend_state && +#endif +#if defined(RGBLIGHT_ENABLE) + (!rgblight_config.enable && rgb_matrix_config.enable) +#else + rgb_matrix_config.enable +#endif + ) { + switch (biton32(layer_state)) { + case _MODS: + rgb_matrix_layer_helper(0xFF, 0xFF, 0x00, LED_FLAG_UNDERGLOW); break; + case _GAMEPAD: + rgb_matrix_layer_helper(0xFF, 0x80, 0x00, LED_FLAG_UNDERGLOW); break; + case _DIABLO: + rgb_matrix_layer_helper(0xFF, 0x00, 0x00, LED_FLAG_UNDERGLOW); break; + case _RAISE: + rgb_matrix_layer_helper(0xFF, 0xFF, 0x00, LED_FLAG_UNDERGLOW); break; + case _LOWER: + rgb_matrix_layer_helper(0x00, 0xFF, 0x00, LED_FLAG_UNDERGLOW); break; + case _ADJUST: + rgb_matrix_layer_helper(0xFF, 0x00, 0x00, LED_FLAG_UNDERGLOW); break; + default: + switch (biton32(default_layer_state)) { + case _QWERTY: + rgb_matrix_layer_helper(0x00, 0xFF, 0xFF, LED_FLAG_UNDERGLOW); break; + case _COLEMAK: + rgb_matrix_layer_helper(0xFF, 0x00, 0xFF, LED_FLAG_UNDERGLOW); break; + case _DVORAK: + rgb_matrix_layer_helper(0x00, 0xFF, 0x00, LED_FLAG_UNDERGLOW); break; + case _WORKMAN: + rgb_matrix_layer_helper(0xD9, 0xA5, 0x21, LED_FLAG_UNDERGLOW); break; + case _NORMAN: + rgb_matrix_layer_helper(0xFF, 0x7C, 0x4D, LED_FLAG_UNDERGLOW); break; + case _MALTRON: + rgb_matrix_layer_helper(0xFF, 0xFF, 0x00, LED_FLAG_UNDERGLOW); break; + case _EUCALYN: + rgb_matrix_layer_helper(0xFF, 0x80, 0xBF, LED_FLAG_UNDERGLOW); break; + case _CARPLAX: + rgb_matrix_layer_helper(0x00, 0x00, 0xFF, LED_FLAG_UNDERGLOW); break; + } + } + } +} +#endif diff --git a/keyboards/crkbd/keymaps/manna-harbour_miryoku/keymap.c b/keyboards/crkbd/keymaps/manna-harbour_miryoku/keymap.c new file mode 100644 index 0000000000..56d4de25ac --- /dev/null +++ b/keyboards/crkbd/keymaps/manna-harbour_miryoku/keymap.c @@ -0,0 +1,17 @@ + +// generated from users/manna-harbour_miryoku/miryoku.org + +#define LAYOUT_miryoku( \ + K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, \ + K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, \ + K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, \ + N30, N31, K32, K33, K34, K35, K36, K37, N38, N39 \ +) \ +LAYOUT( \ +KC_NO, K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, KC_NO, \ +KC_NO, K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, KC_NO, \ +KC_NO, K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, KC_NO, \ + K32, K33, K34, K35, K36, K37 \ +) + +#include "manna-harbour_miryoku.c" diff --git a/keyboards/crkbd/keymaps/thumb_ctrl/config.h b/keyboards/crkbd/keymaps/thumb_ctrl/config.h new file mode 100755 index 0000000000..5670d8c646 --- /dev/null +++ b/keyboards/crkbd/keymaps/thumb_ctrl/config.h @@ -0,0 +1,44 @@ +/* +This is the c configuration file for the keymap + +Copyright 2012 Jun Wako <wakojun@gmail.com> +Copyright 2015 Jack Humbert + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see <http://www.gnu.org/licenses/>. +*/ + +#pragma once + +//#define USE_MATRIX_I2C + +/* Select hand configuration */ + +#define MASTER_LEFT +// #define MASTER_RIGHT +// #define EE_HANDS + +#define SSD1306OLED + +#define USE_SERIAL_PD2 + +#define TAPPING_FORCE_HOLD +#define TAPPING_TERM 150 + +#undef RGBLED_NUM +#define RGBLIGHT_ANIMATIONS +#define RGBLED_NUM 27 +#define RGBLIGHT_LIMIT_VAL 120 +#define RGBLIGHT_HUE_STEP 10 +#define RGBLIGHT_SAT_STEP 17 +#define RGBLIGHT_VAL_STEP 17 diff --git a/keyboards/crkbd/keymaps/thumb_ctrl/keymap.c b/keyboards/crkbd/keymaps/thumb_ctrl/keymap.c new file mode 100755 index 0000000000..c67958aa14 --- /dev/null +++ b/keyboards/crkbd/keymaps/thumb_ctrl/keymap.c @@ -0,0 +1,253 @@ +#include QMK_KEYBOARD_H +#include "bootloader.h" +#ifdef PROTOCOL_LUFA + #include "lufa.h" + #include "split_util.h" +#endif +#ifdef SSD1306OLED + #include "ssd1306.h" +#endif + +extern keymap_config_t keymap_config; + +#ifdef RGBLIGHT_ENABLE +//Following line allows macro to read current RGB settings +extern rgblight_config_t rgblight_config; +#endif + +extern uint8_t is_master; + +// Each layer gets a name for readability, which is then used in the keymap matrix below. +// The underscores don't mean anything - you can have a layer called STUFF or any other name. +// Layer names don't all need to be of the same length, obviously, and you can also skip them +// entirely and just use numbers. +enum layer_names { + _QWERTY, + _LOWER, + _RAISE, + _ADJUST +}; + +enum custom_keycodes { + QWERTY = SAFE_RANGE, + LOWER, + RAISE, + ADJUST, + BACKLIT, + RGBRST +}; + +#define KC_ KC_TRNS +#define KC______ KC_TRNS +#define KC_XXXXX KC_NO +#define KC_LOWER LOWER +#define KC_RAISE RAISE +#define KC_RST RESET +#define KC_LRST RGBRST +#define KC_LTOG RGB_TOG +#define KC_LHUI RGB_HUI +#define KC_LHUD RGB_HUD +#define KC_LSAI RGB_SAI +#define KC_LSAD RGB_SAD +#define KC_LVAI RGB_VAI +#define KC_LVAD RGB_VAD +#define KC_LMOD RGB_MOD +#define KC_CTLTB CTL_T(KC_TAB) +#define KC_GUIEI GUI_T(KC_LANG2) +#define KC_ALTKN ALT_T(KC_LANG1) +#define KC_CTLEN CTL_T(KC_LANG2) // for Linux and Windows +#define KC_GUIEN GUI_T(KC_LANG2) // for Mac +#define KC_SFTJP SFT_T(KC_LANG1) +#define KC_ALTSP ALT_T(KC_SPACE) +#define KC_ALTDL ALT_T(KC_DEL) + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + [_QWERTY] = LAYOUT_kc( + //,-----------------------------------------. ,-----------------------------------------. + ESC, Q, W, E, R, T, Y, U, I, O, P, BSPC, + //|------+------+------+------+------+------| |------+------+------+------+------+------| + CTLTB, A, S, D, F, G, H, J, K, L, SCLN, QUOT, + //|------+------+------+------+------+------| |------+------+------+------+------+------| + LSFT, Z, X, C, V, B, N, M, COMM, DOT, SLSH, ENT, + //|------+------+------+------+------+------+------| |------+------+------+------+------+------+------| + ALTSP, LOWER, GUIEN, SFTJP, RAISE, ALTDL + //`--------------------' `--------------------' + ), + + [_LOWER] = LAYOUT_kc( + //,-----------------------------------------. ,-----------------------------------------. + , 1, 2, 3, 4, 5, 6, 7, 8, 9, 0, , + //|------+------+------+------+------+------| |------+------+------+------+------+------| + , HOME, END, PGDN, PGUP, F11, LEFT, DOWN, UP, RGHT, F12, PIPE, + //|------+------+------+------+------+------| |------+------+------+------+------+------| + , F1, F2, F3, F4, F5, F6, F7, F8, F9, F10, , + //|------+------+------+------+------+------+------| |------+------+------+------+------+------+------| + , , , , , + //`--------------------' `--------------------' + ), + + [_RAISE] = LAYOUT_kc( + //,-----------------------------------------. ,-----------------------------------------. + , EXLM, AT, HASH, DLR, PERC, CIRC, AMPR, ASTR, LPRN, RPRN, , + //|------+------+------+------+------+------| |------+------+------+------+------+------| + , XXXXX, XXXXX, XXXXX, XXXXX, PSCR, GRV, MINS, PLUS, LCBR, RCBR, BSLS, + //|------+------+------+------+------+------| |------+------+------+------+------+------| + , XXXXX, XXXXX, XXXXX, XXXXX, XXXXX, TILD, UNDS, EQL, LBRC, RBRC, , + //|------+------+------+------+------+------+------| |------+------+------+------+------+------+------| + , , , , , + //`--------------------' `--------------------' + ), + + [_ADJUST] = LAYOUT_kc( + //,-----------------------------------------. ,-----------------------------------------. + RST, LRST, XXXXX, XXXXX, XXXXX, XXXXX, XXXXX, XXXXX, XXXXX, XXXXX, XXXXX, XXXXX, + //|------+------+------+------+------+------| |------+------+------+------+------+------| + LTOG, LHUI, LSAI, LVAI, XXXXX, XXXXX, XXXXX, XXXXX, XXXXX, XXXXX, XXXXX, XXXXX, + //|------+------+------+------+------+------| |------+------+------+------+------+------| + LMOD, LHUD, LSAD, LVAD, XXXXX, XXXXX, XXXXX, XXXXX, XXXXX, XXXXX, XXXXX, XXXXX, + //|------+------+------+------+------+------+------| |------+------+------+------+------+------+------| + GUIEI, LOWER, SPC, ENT, RAISE, ALTKN + //`--------------------' `--------------------' + ) +}; + +int RGB_current_mode; + +void persistent_default_layer_set(uint16_t default_layer) { + eeconfig_update_default_layer(default_layer); + default_layer_set(default_layer); +} + +// Setting ADJUST layer RGB back to default +void update_tri_layer_RGB(uint8_t layer1, uint8_t layer2, uint8_t layer3) { + if (IS_LAYER_ON(layer1) && IS_LAYER_ON(layer2)) { + layer_on(layer3); + } else { + layer_off(layer3); + } +} + +void matrix_init_user(void) { + #ifdef RGBLIGHT_ENABLE + RGB_current_mode = rgblight_config.mode; + #endif + //SSD1306 OLED init, make sure to add #define SSD1306OLED in config.h + #ifdef SSD1306OLED + iota_gfx_init(!has_usb()); // turns on the display + #endif +} + +//SSD1306 OLED update loop, make sure to add #define SSD1306OLED in config.h +#ifdef SSD1306OLED + +// When add source files to SRC in rules.mk, you can use functions. +const char *read_layer_state(void); +const char *read_logo(void); +void set_keylog(uint16_t keycode, keyrecord_t *record); +const char *read_keylog(void); +const char *read_keylogs(void); + +// const char *read_mode_icon(bool swap); +// const char *read_host_led_state(void); +// void set_timelog(void); +// const char *read_timelog(void); + +void matrix_scan_user(void) { + iota_gfx_task(); +} + +void matrix_render_user(struct CharacterMatrix *matrix) { + if (is_master) { + // If you want to change the display of OLED, you need to change here + matrix_write_ln(matrix, read_layer_state()); + matrix_write_ln(matrix, read_keylog()); + matrix_write_ln(matrix, read_keylogs()); + //matrix_write_ln(matrix, read_mode_icon(keymap_config.swap_lalt_lgui)); + //matrix_write_ln(matrix, read_host_led_state()); + //matrix_write_ln(matrix, read_timelog()); + } else { + matrix_write(matrix, read_logo()); + } +} + +void matrix_update(struct CharacterMatrix *dest, const struct CharacterMatrix *source) { + if (memcmp(dest->display, source->display, sizeof(dest->display))) { + memcpy(dest->display, source->display, sizeof(dest->display)); + dest->dirty = true; + } +} + +void iota_gfx_task_user(void) { + struct CharacterMatrix matrix; + matrix_clear(&matrix); + matrix_render_user(&matrix); + matrix_update(&display, &matrix); +} +#endif//SSD1306OLED + +bool process_record_user(uint16_t keycode, keyrecord_t *record) { + if (record->event.pressed) { +#ifdef SSD1306OLED + set_keylog(keycode, record); +#endif + // set_timelog(); + } + + switch (keycode) { + case QWERTY: + if (record->event.pressed) { + persistent_default_layer_set(1UL<<_QWERTY); + } + return false; + break; + case LOWER: + if (record->event.pressed) { + layer_on(_LOWER); + update_tri_layer_RGB(_LOWER, _RAISE, _ADJUST); + } else { + layer_off(_LOWER); + update_tri_layer_RGB(_LOWER, _RAISE, _ADJUST); + } + return false; + break; + case RAISE: + if (record->event.pressed) { + layer_on(_RAISE); + update_tri_layer_RGB(_LOWER, _RAISE, _ADJUST); + } else { + layer_off(_RAISE); + update_tri_layer_RGB(_LOWER, _RAISE, _ADJUST); + } + return false; + break; + case ADJUST: + if (record->event.pressed) { + layer_on(_ADJUST); + } else { + layer_off(_ADJUST); + } + return false; + break; + case RGB_MOD: + #ifdef RGBLIGHT_ENABLE + if (record->event.pressed) { + rgblight_mode(RGB_current_mode); + rgblight_step(); + RGB_current_mode = rgblight_config.mode; + } + #endif + return false; + break; + case RGBRST: + #ifdef RGBLIGHT_ENABLE + if (record->event.pressed) { + eeconfig_update_rgblight_default(); + rgblight_enable(); + RGB_current_mode = rgblight_config.mode; + } + #endif + break; + } + return true; +} + diff --git a/keyboards/crkbd/keymaps/thumb_ctrl/rules.mk b/keyboards/crkbd/keymaps/thumb_ctrl/rules.mk new file mode 100755 index 0000000000..16deaf45d1 --- /dev/null +++ b/keyboards/crkbd/keymaps/thumb_ctrl/rules.mk @@ -0,0 +1,31 @@ + +# Build Options +# change to "no" to disable the options, or define them in the Makefile in +# the appropriate keymap folder that will get included automatically +# +BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration(+1000) +MOUSEKEY_ENABLE = no # Mouse keys(+4700) +EXTRAKEY_ENABLE = no # Audio control and System control(+450) +CONSOLE_ENABLE = no # Console for debug(+400) +COMMAND_ENABLE = no # Commands for debug and configuration +NKRO_ENABLE = no # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work +BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality +MIDI_ENABLE = no # MIDI controls +AUDIO_ENABLE = no # Audio output on port C6 +UNICODE_ENABLE = no # Unicode +BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID +RGBLIGHT_ENABLE = yes # Enable WS2812 RGB underlight. +SWAP_HANDS_ENABLE = no # Enable one-hand typing + +# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE +SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend + +# If you want to change the display of OLED, you need to change here +SRC += ./lib/glcdfont.c \ + ./lib/rgb_state_reader.c \ + ./lib/layer_state_reader.c \ + ./lib/logo_reader.c \ + ./lib/keylogger.c \ + # ./lib/mode_icon_reader.c \ + # ./lib/host_led_state_reader.c \ + # ./lib/timelogger.c \ diff --git a/keyboards/crkbd/keymaps/vlukash_trackpad_left/config.h b/keyboards/crkbd/keymaps/vlukash_trackpad_left/config.h new file mode 100644 index 0000000000..bdd1a099ae --- /dev/null +++ b/keyboards/crkbd/keymaps/vlukash_trackpad_left/config.h @@ -0,0 +1,21 @@ +#pragma once + +/* Select hand configuration */ + +#define MASTER_RIGHT +// #define EE_HANDS + +#define SSD1306OLED + +#define USE_SERIAL_PD2 + +#define TAPPING_FORCE_HOLD +#define TAPPING_TERM 100 + +#undef RGBLED_NUM +#define RGBLIGHT_ANIMATIONS +#define RGBLED_NUM 27 +#define RGBLIGHT_LIMIT_VAL 120 +#define RGBLIGHT_HUE_STEP 10 +#define RGBLIGHT_SAT_STEP 17 +#define RGBLIGHT_VAL_STEP 17 diff --git a/keyboards/crkbd/keymaps/vlukash_trackpad_left/keymap.c b/keyboards/crkbd/keymaps/vlukash_trackpad_left/keymap.c new file mode 100644 index 0000000000..48f60419fb --- /dev/null +++ b/keyboards/crkbd/keymaps/vlukash_trackpad_left/keymap.c @@ -0,0 +1,227 @@ +#include QMK_KEYBOARD_H +#include "bootloader.h" +#ifdef PROTOCOL_LUFA + #include "lufa.h" + #include "split_util.h" +#endif +#ifdef SSD1306OLED + #include "ssd1306.h" +#endif + +#ifdef RGBLIGHT_ENABLE +//Following line allows macro to read current RGB settings +extern rgblight_config_t rgblight_config; +#endif + +extern uint8_t is_master; + +enum layer_names { + _QWERTY, + _LOWER, + _RAISE, + _ADJUST +}; + +enum custom_keycodes { + QWERTY = SAFE_RANGE, + LOWER, + RAISE, + RGBRST, + MBTN1, + SCRL +}; + +#define KC______ KC_TRNS +#define KC_XXXXX KC_NO +#define KC_LOWER LOWER +#define KC_RAISE RAISE +#define KC_RST RESET +#define KC_LRST RGBRST +#define KC_LTOG RGB_TOG +#define KC_LHUI RGB_HUI +#define KC_LHUD RGB_HUD +#define KC_LSAI RGB_SAI +#define KC_LSAD RGB_SAD +#define KC_LVAI RGB_VAI +#define KC_LVAD RGB_VAD +#define KC_LMOD RGB_MOD + +#define KC_CTLA CTL_T(KC_A) +#define KC_CTLSC CTL_T(KC_SCLN) +#define KC_SFTZ SFT_T(KC_Z) +#define KC_SFTSL SFT_T(KC_SLSH) +#define KC_WINX LWIN_T(KC_X) +#define KC_WINDO RWIN_T(KC_DOT) + +#define KC_MBTN1 MBTN1 +#define KC_SCRL SCRL + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + [_QWERTY] = LAYOUT_kc( + //,-----------------------------------------. ,-----------------------------------------. + ESC, Q, W, E, R, T, Y, U, I, O, P, BSPC, + //|------+------+------+------+------+------| |------+------+------+------+------+------| + TAB, CTLA, S, D, F, G, H, J, K, L, CTLSC, QUOT, + //|------+------+------+------+------+------| |------+------+------+------+------+------| + GRAVE, SFTZ, WINX, C, V, B, N, M, COMM, WINDO, SFTSL,BSLASH, + //|------+------+------+------+------+------+------| |------+------+------+------+------+------+------| + LOWER, SPC, SCRL, MBTN1, ENT, RAISE + //`--------------------' `--------------------' + ), + + [_LOWER] = LAYOUT_kc( + //,-----------------------------------------. ,-----------------------------------------. + ESC, XXXXX, PGDN, PSCR, PGUP, LBRC, RBRC, 7, 8, 9, XXXXX, XXXXX, + //|------+------+------+------+------+------| |------+------+------+------+------+------| + XXXXX, LCTRL, PLUS, MINS, EQL, LPRN, RPRN, 4, 5, 6, RCTRL, XXXXX, + //|------+------+------+------+------+------| |------+------+------+------+------+------| + XXXXX, LSFT, HOME, XXXXX, END, LCBR, RCBR, 1, 2, 3, RSFT, XXXXX, + //|------+------+------+------+------+------+------| |------+------+------+------+------+------+------| + LOWER, SPC, SCRL, MBTN1, ENT, 0 + //`--------------------' `--------------------' + ), + + [_RAISE] = LAYOUT_kc( + //,-----------------------------------------. ,-----------------------------------------. + ESC, XXXXX, F7, F8, F9, F10, BTN2, BTN2, MNXT, MPRV, MPLY, MSTP, + //|------+------+------+------+------+------| |------+------+------+------+------+------| + XXXXX, LCTRL, F4, F5, F6, F11, LEFT, DOWN, UP, RIGHT, RCTRL, XXXXX, + //|------+------+------+------+------+------| |------+------+------+------+------+------| + XXXXX, LSFT, F1, F2, F3, F12, XXXXX, XXXXX, VOLU, VOLD, MUTE, RSFT, + //|------+------+------+------+------+------+------| |------+------+------+------+------+------+------| + LOWER, SPC, SCRL, MBTN1, ENT, RAISE + //`--------------------' `--------------------' + ), + + [_ADJUST] = LAYOUT_kc( + //,-----------------------------------------. ,-----------------------------------------. + RST, LRST, XXXXX, XXXXX, XXXXX, XXXXX, XXXXX, XXXXX, XXXXX, XXXXX, XXXXX, RST, + //|------+------+------+------+------+------| |------+------+------+------+------+------| + LTOG, LHUI, LSAI, LVAI, XXXXX, XXXXX, XXXXX, XXXXX, XXXXX, XXXXX, XXXXX, XXXXX, + //|------+------+------+------+------+------| |------+------+------+------+------+------| + LMOD, LHUD, LSAD, LVAD, XXXXX, XXXXX, XXXXX, XXXXX, XXXXX, XXXXX, XXXXX, XXXXX, + //|------+------+------+------+------+------+------| |------+------+------+------+------+------+------| + LOWER, SPC, SCRL, MBTN1, ENT, RAISE + //`--------------------' `--------------------' + ) +}; + +int RGB_current_mode; + +void persistent_default_layer_set(uint16_t default_layer) { + eeconfig_update_default_layer(default_layer); + default_layer_set(default_layer); +} + +// Setting ADJUST layer RGB back to default +void update_tri_layer_RGB(uint8_t layer1, uint8_t layer2, uint8_t layer3) { + if (IS_LAYER_ON(layer1) && IS_LAYER_ON(layer2)) { + layer_on(layer3); + } else { + layer_off(layer3); + } +} + +void matrix_init_user(void) { + #ifdef RGBLIGHT_ENABLE + RGB_current_mode = rgblight_config.mode; + #endif + //SSD1306 OLED init, make sure to add #define SSD1306OLED in config.h + #ifdef SSD1306OLED + iota_gfx_init(!has_usb()); // turns on the display + #endif +} + +//SSD1306 OLED update loop, make sure to add #define SSD1306OLED in config.h +#ifdef SSD1306OLED + +// When add source files to SRC in rules.mk, you can use functions. +const char *read_layer_state(void); +const char *read_logo(void); +void set_keylog(uint16_t keycode, keyrecord_t *record); +const char *read_keylog(void); +const char *read_keylogs(void); + +void matrix_scan_user(void) { + iota_gfx_task(); +} + +void matrix_render_user(struct CharacterMatrix *matrix) { + if (is_master) { + // If you want to change the display of OLED, you need to change here + matrix_write_ln(matrix, read_layer_state()); + matrix_write_ln(matrix, read_keylog()); + matrix_write_ln(matrix, read_keylogs()); + } else { + matrix_write(matrix, read_logo()); + } +} + +void matrix_update(struct CharacterMatrix *dest, const struct CharacterMatrix *source) { + if (memcmp(dest->display, source->display, sizeof(dest->display))) { + memcpy(dest->display, source->display, sizeof(dest->display)); + dest->dirty = true; + } +} + +void iota_gfx_task_user(void) { + struct CharacterMatrix matrix; + matrix_clear(&matrix); + matrix_render_user(&matrix); + matrix_update(&display, &matrix); +} +#endif//SSD1306OLED + +bool process_record_user(uint16_t keycode, keyrecord_t *record) { + if (record->event.pressed) { +#ifdef SSD1306OLED + set_keylog(keycode, record); +#endif + } + + switch (keycode) { + case QWERTY: + if (record->event.pressed) { + persistent_default_layer_set(1UL<<_QWERTY); + } + return false; + case LOWER: + if (record->event.pressed) { + layer_on(_LOWER); + update_tri_layer_RGB(_LOWER, _RAISE, _ADJUST); + } else { + layer_off(_LOWER); + update_tri_layer_RGB(_LOWER, _RAISE, _ADJUST); + } + return false; + case RAISE: + if (record->event.pressed) { + layer_on(_RAISE); + update_tri_layer_RGB(_LOWER, _RAISE, _ADJUST); + } else { + layer_off(_RAISE); + update_tri_layer_RGB(_LOWER, _RAISE, _ADJUST); + } + return false; + case RGB_MOD: + #ifdef RGBLIGHT_ENABLE + if (record->event.pressed) { + rgblight_mode(RGB_current_mode); + rgblight_step(); + RGB_current_mode = rgblight_config.mode; + } + #endif + return false; + case RGBRST: + #ifdef RGBLIGHT_ENABLE + if (record->event.pressed) { + eeconfig_update_rgblight_default(); + rgblight_enable(); + RGB_current_mode = rgblight_config.mode; + } + #endif + break; + } + return true; +} + diff --git a/keyboards/crkbd/keymaps/vlukash_trackpad_left/readme.md b/keyboards/crkbd/keymaps/vlukash_trackpad_left/readme.md new file mode 100644 index 0000000000..91b884749f --- /dev/null +++ b/keyboards/crkbd/keymaps/vlukash_trackpad_left/readme.md @@ -0,0 +1,14 @@ +# CrKbd with the Trackpad support + +CrKbd version that supports BlackBerry 8520 trackpad via additional PCB. +See this repository for more details: + - https://github.com/vlukash/corne-trackpad + - https://vlukash.com/2019/01/15/trackpad-in-keycap-corne-crkbd-keyboard + +This firmware is for the Left keyboard. + +# Build + +``` +make crkbd:vlukash_trackpad_left:dfu +``` diff --git a/keyboards/crkbd/keymaps/vlukash_trackpad_left/rules.mk b/keyboards/crkbd/keymaps/vlukash_trackpad_left/rules.mk new file mode 100644 index 0000000000..46be73c475 --- /dev/null +++ b/keyboards/crkbd/keymaps/vlukash_trackpad_left/rules.mk @@ -0,0 +1,11 @@ +# Build Options +RGBLIGHT_ENABLE = yes # Enable WS2812 RGB underlight. + +BOOTLOADER = atmel-dfu + +# If you want to change the display of OLED, you need to change here +SRC += ./lib/glcdfont.c \ + ./lib/rgb_state_reader.c \ + ./lib/layer_state_reader.c \ + ./lib/logo_reader.c \ + ./lib/keylogger.c \ diff --git a/keyboards/crkbd/keymaps/vlukash_trackpad_right/config.h b/keyboards/crkbd/keymaps/vlukash_trackpad_right/config.h new file mode 100644 index 0000000000..8cbd8e9078 --- /dev/null +++ b/keyboards/crkbd/keymaps/vlukash_trackpad_right/config.h @@ -0,0 +1,35 @@ +#pragma once + +#define NO_DEBUG_LEDS + +// Connector PCB version +// 1 - PCB that supports flex caple and the trackpad sensor is mounted on an 'H' keycap +// - https://github.com/vlukash/corne-trackpad/tree/master/connector +// 2 - PCB woth no flex option, track sensor mounted directly on the PCB +// - https://github.com/vlukash/corne-trackpad/tree/master/connector-no-flex +#define TRACKPAD_CONNECTOR_VER 1 + +/* Select hand configuration */ +#define MASTER_RIGHT + +#define USE_SERIAL_PD2 + +#define TAPPING_FORCE_HOLD +#define TAPPING_TERM 300 + +#undef RGBLED_NUM +#define RGBLIGHT_ANIMATIONS +#define RGBLED_NUM 27 +#define RGBLIGHT_LIMIT_VAL 120 +#define RGBLIGHT_HUE_STEP 10 +#define RGBLIGHT_SAT_STEP 17 +#define RGBLIGHT_VAL_STEP 17 + +/* key matrix size */ +// Rows are doubled-up +#undef MATRIX_COL_PINS +#define MATRIX_COL_PINS { F4, F5, F6, F7, B7, D5 } + +/* ws2812 RGB LED */ +#undef RGB_DI_PIN +#define RGB_DI_PIN B5 diff --git a/keyboards/crkbd/keymaps/vlukash_trackpad_right/keymap.c b/keyboards/crkbd/keymaps/vlukash_trackpad_right/keymap.c new file mode 100644 index 0000000000..8749f7a686 --- /dev/null +++ b/keyboards/crkbd/keymaps/vlukash_trackpad_right/keymap.c @@ -0,0 +1,199 @@ +#include QMK_KEYBOARD_H +#include "bootloader.h" +#include "mousekey.h" +#include "pointing_device.h" +#include "report.h" + +#ifdef PROTOCOL_LUFA + #include "lufa.h" + #include "split_util.h" +#endif + +extern bool isScrollMode; + +#ifdef RGBLIGHT_ENABLE +//Following line allows macro to read current RGB settings +extern rgblight_config_t rgblight_config; +#endif + +extern uint8_t is_master; + +enum layer_names { + _QWERTY, + _LOWER, + _RAISE, + _ADJUST +}; + +enum custom_keycodes { + QWERTY = SAFE_RANGE, + LOWER, + RAISE, + RGBRST, + MBTN1, + SCRL +}; + +#define KC______ KC_TRNS +#define KC_XXXXX KC_NO +#define KC_LOWER LOWER +#define KC_RAISE RAISE +#define KC_RST RESET +#define KC_LRST RGBRST +#define KC_LTOG RGB_TOG +#define KC_LHUI RGB_HUI +#define KC_LHUD RGB_HUD +#define KC_LSAI RGB_SAI +#define KC_LSAD RGB_SAD +#define KC_LVAI RGB_VAI +#define KC_LVAD RGB_VAD +#define KC_LMOD RGB_MOD + +#define KC_CTLA CTL_T(KC_A) +#define KC_CTLSC CTL_T(KC_SCLN) +#define KC_SFTZ SFT_T(KC_Z) +#define KC_SFTSL SFT_T(KC_SLSH) +#define KC_WINX LWIN_T(KC_X) +#define KC_WINDO RWIN_T(KC_DOT) + +#define KC_MBTN1 MBTN1 +#define KC_SCRL SCRL + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + [_QWERTY] = LAYOUT_kc( + //,-----------------------------------------. ,-----------------------------------------. + ESC, Q, W, E, R, T, Y, U, I, O, P, BSPC, + //|------+------+------+------+------+------| |------+------+------+------+------+------| + TAB, CTLA, S, D, F, G, H, J, K, L, CTLSC, QUOT, + //|------+------+------+------+------+------| |------+------+------+------+------+------| + GRAVE, SFTZ, WINX, C, V, B, N, M, COMM, WINDO, SFTSL,BSLASH, + //|------+------+------+------+------+------+------| |------+------+------+------+------+------+------| + LOWER, SPC, SCRL, MBTN1, ENT, RAISE + //`--------------------' `--------------------' + ), + + [_LOWER] = LAYOUT_kc( + //,-----------------------------------------. ,-----------------------------------------. + ESC, XXXXX, PGDN, PSCR, PGUP, LBRC, RBRC, 7, 8, 9, XXXXX, XXXXX, + //|------+------+------+------+------+------| |------+------+------+------+------+------| + XXXXX, LCTRL, PLUS, MINS, EQL, LPRN, RPRN, 4, 5, 6, RCTRL, XXXXX, + //|------+------+------+------+------+------| |------+------+------+------+------+------| + XXXXX, LSFT, HOME, XXXXX, END, LCBR, RCBR, 1, 2, 3, RSFT, XXXXX, + //|------+------+------+------+------+------+------| |------+------+------+------+------+------+------| + LOWER, SPC, SCRL, MBTN1, ENT, 0 + //`--------------------' `--------------------' + ), + + [_RAISE] = LAYOUT_kc( + //,-----------------------------------------. ,-----------------------------------------. + ESC, XXXXX, F7, F8, F9, F10, BTN2, BTN2, MNXT, MPRV, MPLY, MSTP, + //|------+------+------+------+------+------| |------+------+------+------+------+------| + XXXXX, LCTRL, F4, F5, F6, F11, LEFT, DOWN, UP, RIGHT, RCTRL, XXXXX, + //|------+------+------+------+------+------| |------+------+------+------+------+------| + XXXXX, LSFT, F1, F2, F3, F12, XXXXX, XXXXX, VOLU, VOLD, MUTE, RSFT, + //|------+------+------+------+------+------+------| |------+------+------+------+------+------+------| + LOWER, SPC, SCRL, MBTN1, ENT, RAISE + //`--------------------' `--------------------' + ), + + [_ADJUST] = LAYOUT_kc( + //,-----------------------------------------. ,-----------------------------------------. + RST, LRST, XXXXX, XXXXX, XXXXX, XXXXX, XXXXX, XXXXX, XXXXX, XXXXX, XXXXX, RST, + //|------+------+------+------+------+------| |------+------+------+------+------+------| + LTOG, LHUI, LSAI, LVAI, XXXXX, XXXXX, XXXXX, XXXXX, XXXXX, XXXXX, XXXXX, XXXXX, + //|------+------+------+------+------+------| |------+------+------+------+------+------| + LMOD, LHUD, LSAD, LVAD, XXXXX, XXXXX, XXXXX, XXXXX, XXXXX, XXXXX, XXXXX, XXXXX, + //|------+------+------+------+------+------+------| |------+------+------+------+------+------+------| + LOWER, SPC, SCRL, MBTN1, ENT, RAISE + //`--------------------' `--------------------' + ) +}; + +int RGB_current_mode; + +void persistent_default_layer_set(uint16_t default_layer) { + eeconfig_update_default_layer(default_layer); + default_layer_set(default_layer); +} + +// Setting ADJUST layer RGB back to default +void update_tri_layer_RGB(uint8_t layer1, uint8_t layer2, uint8_t layer3) { + if (IS_LAYER_ON(layer1) && IS_LAYER_ON(layer2)) { + layer_on(layer3); + } else { + layer_off(layer3); + } +} + +void matrix_init_user(void) { + #ifdef RGBLIGHT_ENABLE + RGB_current_mode = rgblight_config.mode; + #endif +} + +bool process_record_user(uint16_t keycode, keyrecord_t *record) { + report_mouse_t currentReport = {}; + switch (keycode) { + case QWERTY: + if (record->event.pressed) { + persistent_default_layer_set(1UL<<_QWERTY); + } + return false; + case LOWER: + if (record->event.pressed) { + layer_on(_LOWER); + update_tri_layer_RGB(_LOWER, _RAISE, _ADJUST); + } else { + layer_off(_LOWER); + update_tri_layer_RGB(_LOWER, _RAISE, _ADJUST); + } + return false; + case RAISE: + if (record->event.pressed) { + layer_on(_RAISE); + update_tri_layer_RGB(_LOWER, _RAISE, _ADJUST); + } else { + layer_off(_RAISE); + update_tri_layer_RGB(_LOWER, _RAISE, _ADJUST); + } + return false; + case RGB_MOD: + #ifdef RGBLIGHT_ENABLE + if (record->event.pressed) { + rgblight_mode(RGB_current_mode); + rgblight_step(); + RGB_current_mode = rgblight_config.mode; + } + #endif + return false; + case RGBRST: + #ifdef RGBLIGHT_ENABLE + if (record->event.pressed) { + eeconfig_update_rgblight_default(); + rgblight_enable(); + RGB_current_mode = rgblight_config.mode; + } + #endif + break; + case MBTN1: + currentReport = pointing_device_get_report(); + if (record->event.pressed) { + currentReport.buttons |= MOUSE_BTN1; + } + else { + currentReport.buttons &= ~MOUSE_BTN1; + } + pointing_device_set_report(currentReport); + pointing_device_send(); + return false; + case SCRL: + if (record->event.pressed) { + isScrollMode = true; + } + else { + isScrollMode = false; + } + return false; + } + return true; +} diff --git a/keyboards/crkbd/keymaps/vlukash_trackpad_right/readme.md b/keyboards/crkbd/keymaps/vlukash_trackpad_right/readme.md new file mode 100644 index 0000000000..cd511018c1 --- /dev/null +++ b/keyboards/crkbd/keymaps/vlukash_trackpad_right/readme.md @@ -0,0 +1,14 @@ +# CrKbd with the Trackpad support + +CrKbd version that supports BlackBerry 8520 trackpad via additional PCB. +See this repository for more details: + - https://github.com/vlukash/corne-trackpad + - https://vlukash.com/2019/01/15/trackpad-in-keycap-corne-crkbd-keyboard + +This firmware is for the Right keyboard. + +# Build + +``` +make crkbd:vlukash_trackpad_right:dfu +``` diff --git a/keyboards/crkbd/keymaps/vlukash_trackpad_right/rules.mk b/keyboards/crkbd/keymaps/vlukash_trackpad_right/rules.mk new file mode 100644 index 0000000000..bd53c19211 --- /dev/null +++ b/keyboards/crkbd/keymaps/vlukash_trackpad_right/rules.mk @@ -0,0 +1,10 @@ +# Build Options +POINTING_DEVICE_ENABLE = yes # Generic Pointer, not as big as mouse keys hopefully. +MOUSEKEY_ENABLE = yes # Mouse keys(+4700) +EXTRAKEY_ENABLE = yes # Audio control and System control(+450) +RGBLIGHT_ENABLE = yes # Enable WS2812 RGB underlight. + +BOOTLOADER = atmel-dfu + +# Add support for the BB 8520 trackpad +SRC += trackpad.c diff --git a/keyboards/crkbd/keymaps/vlukash_trackpad_right/trackpad.c b/keyboards/crkbd/keymaps/vlukash_trackpad_right/trackpad.c new file mode 100644 index 0000000000..afccb8c7ed --- /dev/null +++ b/keyboards/crkbd/keymaps/vlukash_trackpad_right/trackpad.c @@ -0,0 +1,78 @@ +#include "trackpad.h" + +// bool isScrollingMode = false; +bool isScrollMode = false; + +void pointing_device_init(void){ + + SPI_Init(SPI_SPEED_FCPU_DIV_8 | SPI_MODE_MASTER); + + // Set as output + TP_RESET_INIT; + TP_SHUTDOWN_INIT; + TP_CS_INIT; + LVL_SHIFT_EN_INIT; + + // Reset level shifter + LVL_SHIFT_EN_LO; + wait_ms(100); + LVL_SHIFT_EN_HI; + + // Force a BB-8520 reset + TP_RESET_HI; + wait_ms(100); + TP_RESET_LO; + + // Turn on BB-8520 trackpad + TP_SHUTDOWN_LO; + + TP_CS_HI; +} + +uint8_t readRegister(uint8_t address) { + uint8_t data; + + TP_CS_LO; + + // Read the data + SPI_TransferByte(address); + data = SPI_TransferByte(0x00); + + TP_CS_HI; + + return data; +} + +void pointing_device_task(void){ + uint8_t motion = readRegister(0x02); + + // Motion has occurred on the trackpad + if (motion > 127) { + + int8_t dx, dy; + + if(TRACKPAD_CONNECTOR_VER == 1) { + dx = readRegister(0x03); + dy = -readRegister(0x04); + } + else { + dy = -readRegister(0x03); + dx = -readRegister(0x04); + } + + report_mouse_t currentReport = pointing_device_get_report(); + if (isScrollMode) + { + currentReport.h = dx/SCROLL_SPEED_DIVIDER; + currentReport.v = dy/SCROLL_SPEED_DIVIDER; + } + else + { + currentReport.x = dx * POINTER_SPEED_MULTIPLIER; + currentReport.y = dy * POINTER_SPEED_MULTIPLIER; + } + + pointing_device_set_report(currentReport); + pointing_device_send(); + } +} diff --git a/keyboards/crkbd/keymaps/vlukash_trackpad_right/trackpad.h b/keyboards/crkbd/keymaps/vlukash_trackpad_right/trackpad.h new file mode 100644 index 0000000000..755abc7de2 --- /dev/null +++ b/keyboards/crkbd/keymaps/vlukash_trackpad_right/trackpad.h @@ -0,0 +1,32 @@ +#pragma once + +#include "pointing_device.h" +#include "quantum.h" +#include "report.h" +#include <util/delay.h> +#include "../../lib/lufa/LUFA/Drivers/Peripheral/SPI.h" + +// Trackpad speed adjustments +#define POINTER_SPEED_MULTIPLIER 2 +#define SCROLL_SPEED_DIVIDER 6 + +// Pins on corresponding ports +#define TP_RESET 1 +#define TP_SHUTDOWN 0 +#define TP_CS 0 +#define LVL_SHIFT_EN 7 + +// Configure as output +#define TP_RESET_INIT DDRF |= (1 << TP_RESET); +#define TP_SHUTDOWN_INIT DDRF |= (1 << TP_SHUTDOWN); +#define TP_CS_INIT DDRB |= (1 << TP_CS); +#define LVL_SHIFT_EN_INIT DDRC |= (1 << LVL_SHIFT_EN); + +#define TP_RESET_HI PORTF |= (1 << TP_RESET); +#define TP_RESET_LO PORTF &= ~ (1 << TP_RESET); +#define TP_SHUTDOWN_HI PORTF |= (1 << TP_SHUTDOWN); +#define TP_SHUTDOWN_LO PORTF &= ~ (1 << TP_SHUTDOWN); +#define TP_CS_HI PORTB |= (1 << TP_CS); +#define TP_CS_LO PORTB &= ~ (1 << TP_CS); +#define LVL_SHIFT_EN_HI PORTC |= (1 << LVL_SHIFT_EN); +#define LVL_SHIFT_EN_LO PORTC &= ~ (1 << LVL_SHIFT_EN); diff --git a/keyboards/crkbd/keymaps/vxid/README.md b/keyboards/crkbd/keymaps/vxid/README.md new file mode 100644 index 0000000000..7b0f9b8af5 --- /dev/null +++ b/keyboards/crkbd/keymaps/vxid/README.md @@ -0,0 +1,3 @@ +# Vxid crkbd layout + +Inspired by sdothum's wide planck layout. diff --git a/keyboards/crkbd/keymaps/vxid/config.h b/keyboards/crkbd/keymaps/vxid/config.h new file mode 100644 index 0000000000..bbf76d705f --- /dev/null +++ b/keyboards/crkbd/keymaps/vxid/config.h @@ -0,0 +1,44 @@ +/* +This is the c configuration file for the keymap + +Copyright 2012 Jun Wako <wakojun@gmail.com> +Copyright 2015 Jack Humbert + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see <http://www.gnu.org/licenses/>. +*/ + +#pragma once + +//#define USE_MATRIX_I2C + +/* Select hand configuration */ + +// #define MASTER_LEFT +#define MASTER_RIGHT +// #define EE_HANDS + +#define SSD1306OLED + +#define USE_SERIAL_PD2 + +#define TAPPING_FORCE_HOLD +#define TAPPING_TERM 100 + +#undef RGBLED_NUM +#define RGBLIGHT_ANIMATIONS +#define RGBLED_NUM 27 +#define RGBLIGHT_LIMIT_VAL 120 +#define RGBLIGHT_HUE_STEP 10 +#define RGBLIGHT_SAT_STEP 17 +#define RGBLIGHT_VAL_STEP 17 diff --git a/keyboards/crkbd/keymaps/vxid/keymap.c b/keyboards/crkbd/keymaps/vxid/keymap.c new file mode 100644 index 0000000000..e1c73caeb7 --- /dev/null +++ b/keyboards/crkbd/keymaps/vxid/keymap.c @@ -0,0 +1,85 @@ +#include QMK_KEYBOARD_H +#include "bootloader.h" +#ifdef PROTOCOL_LUFA + #include "lufa.h" + #include "split_util.h" +#endif + +extern keymap_config_t keymap_config; + +extern uint8_t is_master; + +#define _QWERTY 0 +#define _LOWER 1 +#define _RAISE 2 + +enum custom_keycodes { + QWERTY = SAFE_RANGE, + LOWER, + RAISE +}; + +#define KC______ KC_TRNS +#define KC_XXXXX KC_NO +#define KC_LOWER LOWER +#define KC_RAISE RAISE + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + [_QWERTY] = LAYOUT_kc( \ + //,-----------------------------------------. ,-----------------------------------------. + Q, W, E, R, T, ESC, DEL, Y, U, I, O, P,\ + //|------+------+------+------+------+------| |------+------+------+------+------+------| + A, S, D, F, G, SPC, BSPC, H, J, K, L, SCLN,\ + //|------+------+------+------+------+------| |------+------+------+------+------+------| + Z, X, C, V, B, TAB, ENT, N, M, COMM, DOT, SLSH,\ + //|------+------+------+------+------+------+------| |------+------+------+------+------+------+------| + LALT, LGUI, LCTL, LSFT, RAISE, LOWER \ + //`--------------------' `--------------------' + ), + + [_LOWER] = LAYOUT_kc( \ + //,-----------------------------------------. ,------------------------------------------. + 1, 2, 3, 4, 5, XXXXX, XXXXX, XXXXX, XXXXX, XXXXX, XXXXX, XXXXX,\ + //|------+------+------+------+------+------| |-------+------+------+------+------+------| + 6, 7, 8, 9, 0, XXXXX, XXXXX, XXXXX, XXXXX, XXXXX, XXXXX, XXXXX,\ + //|------+------+------+------+------+------| |-------+------+------+------+------+------| + EQL, PLUS, MINS, SLSH, ASTR, XXXXX, XXXXX, XXXXX, XXXXX, XXXXX, XXXXX, XXXXX,\ + //|------+------+------+------+------+------+------| |------+-------+------+------+------+------+------| + LALT, LGUI, LCTL, LSFT, RAISE, LOWER \ + //`--------------------' `--------------------' + ), + + [_RAISE] = LAYOUT_kc( \ + //,-----------------------------------------. ,------------------------------------------. + EXLM, AT, HASH, DLR, PERC, LPRN, RPRN, XXXXX, XXXXX, XXXXX, XXXXX, XXXXX,\ + //|------+------+------+------+------+------| |-------+------+------+------+------+------| + CIRC, AMPR, ASTR, QUOT, DQUO, LCBR, RCBR, LEFT, DOWN, UP, RIGHT, XXXXX,\ + //|------+------+------+------+------+------| |-------+------+------+------+------+------| + BSLS, TILD, GRV, UNDS, PIPE, LBRC, RBRC, XXXXX, XXXXX, XXXXX, XXXXX, XXXXX,\ + //|------+------+------+------+------+------+------| |------+-------+------+------+------+------+------| + LALT, LGUI, LCTL, LSFT, RAISE, LOWER \ + //`--------------------' `--------------------' + ) +}; + +bool process_record_user(uint16_t keycode, keyrecord_t *record) { + switch (keycode) { + case LOWER: + if (record->event.pressed) { + layer_on(_LOWER); + } else { + layer_off(_LOWER); + } + return false; + break; + case RAISE: + if (record->event.pressed) { + layer_on(_RAISE); + } else { + layer_off(_RAISE); + } + return false; + break; + } + return true; +} diff --git a/keyboards/crkbd/keymaps/vxid/rules.mk b/keyboards/crkbd/keymaps/vxid/rules.mk new file mode 100644 index 0000000000..83e87ecf98 --- /dev/null +++ b/keyboards/crkbd/keymaps/vxid/rules.mk @@ -0,0 +1,31 @@ + +# Build Options +# change to "no" to disable the options, or define them in the Makefile in +# the appropriate keymap folder that will get included automatically +# +BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration(+1000) +MOUSEKEY_ENABLE = no # Mouse keys(+4700) +EXTRAKEY_ENABLE = no # Audio control and System control(+450) +CONSOLE_ENABLE = no # Console for debug(+400) +COMMAND_ENABLE = no # Commands for debug and configuration +NKRO_ENABLE = no # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work +BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality +MIDI_ENABLE = no # MIDI controls +AUDIO_ENABLE = no # Audio output on port C6 +UNICODE_ENABLE = no # Unicode +BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID +RGBLIGHT_ENABLE = no # Enable WS2812 RGB underlight. +SWAP_HANDS_ENABLE = no # Enable one-hand typing + +# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE +SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend + +# If you want to change the display of OLED, you need to change here +SRC += ./lib/glcdfont.c \ + ./lib/rgb_state_reader.c \ + ./lib/layer_state_reader.c \ + ./lib/logo_reader.c \ + ./lib/keylogger.c \ + # ./lib/mode_icon_reader.c \ + # ./lib/host_led_state_reader.c \ + # ./lib/timelogger.c \ diff --git a/keyboards/crkbd/rev1/config.h b/keyboards/crkbd/rev1/config.h index 6564c8503d..4ea8ff38cd 100644 --- a/keyboards/crkbd/rev1/config.h +++ b/keyboards/crkbd/rev1/config.h @@ -43,7 +43,7 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. // #define BACKLIGHT_LEVELS 3 /* Set 0 if debouncing isn't needed */ -#define DEBOUNCING_DELAY 5 +#define DEBOUNCE 5 /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ //#define LOCKING_SUPPORT_ENABLE diff --git a/keyboards/crkbd/rev1/matrix.c b/keyboards/crkbd/rev1/matrix.c index 718cc57448..dd93506db1 100644 --- a/keyboards/crkbd/rev1/matrix.c +++ b/keyboards/crkbd/rev1/matrix.c @@ -93,6 +93,44 @@ uint8_t matrix_cols(void) return MATRIX_COLS; } +void tx_rx_leds_init(void) +{ +#ifndef NO_DEBUG_LEDS + TX_RX_LED_INIT; + TXLED0; + RXLED0; +#endif +} + +void tx_led_on(void) +{ +#ifndef NO_DEBUG_LEDS + TXLED1; +#endif +} + +void tx_led_off(void) +{ +#ifndef NO_DEBUG_LEDS + TXLED0; +#endif +} + +void rx_led_on(void) +{ +#ifndef NO_DEBUG_LEDS + RXLED1; +#endif +} + +void rx_led_off(void) +{ +#ifndef NO_DEBUG_LEDS + RXLED0; +#endif +} + + void matrix_init(void) { debug_enable = true; @@ -102,9 +140,7 @@ void matrix_init(void) unselect_rows(); init_cols(); - TX_RX_LED_INIT; - TXLED0; - RXLED0; + tx_rx_leds_init(); // initialize matrix state: all keys off for (uint8_t i=0; i < MATRIX_ROWS; i++) { @@ -189,10 +225,10 @@ int serial_transaction(int master_changed) { int ret=serial_update_buffers(); #endif if (ret ) { - if(ret==2) RXLED1; + if(ret==2) rx_led_on(); return 1; } - RXLED0; + rx_led_off(); memcpy(&matrix[slaveOffset], (void *)serial_slave_buffer, SERIAL_SLAVE_BUFFER_LENGTH); return 0; @@ -241,7 +277,7 @@ uint8_t matrix_master_scan(void) { if( serial_transaction(mchanged) ) { #endif // turn on the indicator led when halves are disconnected - TXLED1; + tx_led_on(); error_count++; @@ -254,7 +290,7 @@ uint8_t matrix_master_scan(void) { } } else { // turn off the indicator led on no error - TXLED0; + tx_led_off(); error_count = 0; } matrix_scan_quantum(); diff --git a/keyboards/crkbd/rev1/rev1.c b/keyboards/crkbd/rev1/rev1.c index 38ab927881..b969b5e286 100644 --- a/keyboards/crkbd/rev1/rev1.c +++ b/keyboards/crkbd/rev1/rev1.c @@ -6,13 +6,6 @@ float tone_goodbye[][2] = SONG(GOODBYE_SOUND); #endif -#ifdef SSD1306OLED -void led_set_kb(uint8_t usb_led) { - // put your keyboard LED indicator (ex: Caps Lock LED) toggling code here - //led_set_user(usb_led); -} -#endif - #ifdef RGB_MATRIX_ENABLE // Logical Layout diff --git a/keyboards/crkbd/ssd1306.c b/keyboards/crkbd/ssd1306.c index 4330c8497d..20c2738db7 100644 --- a/keyboards/crkbd/ssd1306.c +++ b/keyboards/crkbd/ssd1306.c @@ -13,7 +13,7 @@ #include "sendchar.h" #include "timer.h" -static const unsigned char font[] PROGMEM; +extern const unsigned char font[] PROGMEM; // Set this to 1 to help diagnose early startup problems // when testing power-on with ble. Turn it off otherwise, |