diff options
Diffstat (limited to 'keyboards/crkbd/keymaps/foostan/keymap.c')
| -rw-r--r-- | keyboards/crkbd/keymaps/foostan/keymap.c | 241 |
1 files changed, 0 insertions, 241 deletions
diff --git a/keyboards/crkbd/keymaps/foostan/keymap.c b/keyboards/crkbd/keymaps/foostan/keymap.c deleted file mode 100644 index 5235b78363..0000000000 --- a/keyboards/crkbd/keymaps/foostan/keymap.c +++ /dev/null @@ -1,241 +0,0 @@ -#include QMK_KEYBOARD_H -#ifdef PROTOCOL_LUFA - #include "lufa.h" - #include "split_util.h" -#endif -#ifdef SSD1306OLED - #include "ssd1306.h" -#endif - -extern keymap_config_t keymap_config; - -#ifdef RGBLIGHT_ENABLE -//Following line allows macro to read current RGB settings -extern rgblight_config_t rgblight_config; -#endif - -extern uint8_t is_master; - -// Each layer gets a name for readability, which is then used in the keymap matrix below. -// The underscores don't mean anything - you can have a layer called STUFF or any other name. -// Layer names don't all need to be of the same length, obviously, and you can also skip them -// entirely and just use numbers. -#define _QWERTY 0 -#define _LOWER 1 -#define _RAISE 2 -#define _ADJUST 3 - -enum custom_keycodes { - QWERTY = SAFE_RANGE, - LOWER, - RAISE, - ADJUST, - BACKLIT, - RGBRST -}; - -enum macro_keycodes { - KC_SAMPLEMACRO, -}; - -#define KC______ KC_TRNS -#define KC_XXXXX KC_NO -#define KC_LOWER LOWER -#define KC_RAISE RAISE -#define KC_RST RESET -#define KC_LRST RGBRST -#define KC_LTOG RGB_TOG -#define KC_LHUI RGB_HUI -#define KC_LHUD RGB_HUD -#define KC_LSAI RGB_SAI -#define KC_LSAD RGB_SAD -#define KC_LVAI RGB_VAI -#define KC_LVAD RGB_VAD -#define KC_LMOD RGB_MOD -#define KC_GUIEI GUI_T(KC_LANG2) -#define KC_ALTKN ALT_T(KC_LANG1) - -const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { - [_QWERTY] = LAYOUT_kc( \ - //,-----------------------------------------. ,-----------------------------------------. - TAB, Q, W, E, R, T, Y, U, I, O, P, BSPC,\ - //|------+------+------+------+------+------| |------+------+------+------+------+------| - LCTL, A, S, D, F, G, H, J, K, L, SCLN, QUOT,\ - //|------+------+------+------+------+------| |------+------+------+------+------+------| - LSFT, Z, X, C, V, B, N, M, COMM, DOT, SLSH, ESC,\ - //|------+------+------+------+------+------+------| |------+------+------+------+------+------+------| - GUIEI, LOWER, SPC, ENT, RAISE, ALTKN \ - //`--------------------' `--------------------' - ), - - [_LOWER] = LAYOUT_kc( \ - //,-----------------------------------------. ,-----------------------------------------. - TAB, 1, 2, 3, 4, 5, 6, 7, 8, 9, 0, BSPC,\ - //|------+------+------+------+------+------| |------+------+------+------+------+------| - LCTL, F1, F2, F3, F4, F5, LEFT, DOWN, UP, RIGHT, XXXXX, XXXXX,\ - //|------+------+------+------+------+------| |------+------+------+------+------+------| - LSFT, F6, F7, F8, F9, F10, XXXXX, XXXXX, XXXXX, XXXXX, XXXXX, XXXXX,\ - //|------+------+------+------+------+------+------| |------+------+------+------+------+------+------| - GUIEI, LOWER, SPC, ENT, RAISE, ALTKN \ - //`--------------------' `--------------------' - ), - - [_RAISE] = LAYOUT_kc( \ - //,-----------------------------------------. ,-----------------------------------------. - TAB, EXLM, AT, HASH, DLR, PERC, CIRC, AMPR, ASTR, LPRN, RPRN, BSPC,\ - //|------+------+------+------+------+------| |------+------+------+------+------+------| - LCTL, XXXXX, XXXXX, XXXXX, XXXXX, XXXXX, MINS, EQL, LCBR, RCBR, PIPE, GRV,\ - //|------+------+------+------+------+------| |------+------+------+------+------+------| - LSFT, XXXXX, XXXXX, XXXXX, XXXXX, XXXXX, UNDS, PLUS, LBRC, RBRC, BSLS, TILD,\ - //|------+------+------+------+------+------+------| |------+------+------+------+------+------+------| - GUIEI, LOWER, SPC, ENT, RAISE, ALTKN \ - //`--------------------' `--------------------' - ), - - [_ADJUST] = LAYOUT_kc( \ - //,-----------------------------------------. ,-----------------------------------------. - RST, LRST, XXXXX, XXXXX, XXXXX, XXXXX, XXXXX, XXXXX, XXXXX, XXXXX, XXXXX, XXXXX,\ - //|------+------+------+------+------+------| |------+------+------+------+------+------| - LTOG, LHUI, LSAI, LVAI, XXXXX, XXXXX, XXXXX, XXXXX, XXXXX, XXXXX, XXXXX, XXXXX,\ - //|------+------+------+------+------+------| |------+------+------+------+------+------| - LMOD, LHUD, LSAD, LVAD, XXXXX, XXXXX, XXXXX, XXXXX, XXXXX, XXXXX, XXXXX, XXXXX,\ - //|------+------+------+------+------+------+------| |------+------+------+------+------+------+------| - GUIEI, LOWER, SPC, ENT, RAISE, ALTKN \ - //`--------------------' `--------------------' - ) -}; - -int RGB_current_mode; - -void persistent_default_layer_set(uint16_t default_layer) { - eeconfig_update_default_layer(default_layer); - default_layer_set(default_layer); -} - -// Setting ADJUST layer RGB back to default -void update_tri_layer_RGB(uint8_t layer1, uint8_t layer2, uint8_t layer3) { - if (IS_LAYER_ON(layer1) && IS_LAYER_ON(layer2)) { - layer_on(layer3); - } else { - layer_off(layer3); - } -} - -void matrix_init_user(void) { - #ifdef RGBLIGHT_ENABLE - RGB_current_mode = rgblight_config.mode; - #endif - //SSD1306 OLED init, make sure to add #define SSD1306OLED in config.h - #ifdef SSD1306OLED - iota_gfx_init(!has_usb()); // turns on the display - #endif -} - -//SSD1306 OLED update loop, make sure to add #define SSD1306OLED in config.h -#ifdef SSD1306OLED - -// When add source files to SRC in rules.mk, you can use functions. -const char *read_layer_state(void); -const char *read_logo(void); -void set_keylog(uint16_t keycode, keyrecord_t *record); -const char *read_keylog(void); -const char *read_keylogs(void); - -// const char *read_mode_icon(bool swap); -// const char *read_host_led_state(void); -// void set_timelog(void); -// const char *read_timelog(void); - -void matrix_scan_user(void) { - iota_gfx_task(); -} - -void matrix_render_user(struct CharacterMatrix *matrix) { - if (is_master) { - // If you want to change the display of OLED, you need to change here - matrix_write_ln(matrix, read_layer_state()); - matrix_write_ln(matrix, read_keylog()); - matrix_write_ln(matrix, read_keylogs()); - //matrix_write_ln(matrix, read_mode_icon(keymap_config.swap_lalt_lgui)); - //matrix_write_ln(matrix, read_host_led_state()); - //matrix_write_ln(matrix, read_timelog()); - } else { - matrix_write(matrix, read_logo()); - } -} - -void matrix_update(struct CharacterMatrix *dest, const struct CharacterMatrix *source) { - if (memcmp(dest->display, source->display, sizeof(dest->display))) { - memcpy(dest->display, source->display, sizeof(dest->display)); - dest->dirty = true; - } -} - -void iota_gfx_task_user(void) { - struct CharacterMatrix matrix; - matrix_clear(&matrix); - matrix_render_user(&matrix); - matrix_update(&display, &matrix); -} -#endif//SSD1306OLED - -bool process_record_user(uint16_t keycode, keyrecord_t *record) { - if (record->event.pressed) { -#ifdef SSD1306OLED - set_keylog(keycode, record); -#endif - // set_timelog(); - } - - switch (keycode) { - case QWERTY: - if (record->event.pressed) { - persistent_default_layer_set(1UL<<_QWERTY); - } - return false; - case LOWER: - if (record->event.pressed) { - layer_on(_LOWER); - update_tri_layer_RGB(_LOWER, _RAISE, _ADJUST); - } else { - layer_off(_LOWER); - update_tri_layer_RGB(_LOWER, _RAISE, _ADJUST); - } - return false; - case RAISE: - if (record->event.pressed) { - layer_on(_RAISE); - update_tri_layer_RGB(_LOWER, _RAISE, _ADJUST); - } else { - layer_off(_RAISE); - update_tri_layer_RGB(_LOWER, _RAISE, _ADJUST); - } - return false; - case ADJUST: - if (record->event.pressed) { - layer_on(_ADJUST); - } else { - layer_off(_ADJUST); - } - return false; - case RGB_MOD: - #ifdef RGBLIGHT_ENABLE - if (record->event.pressed) { - rgblight_mode(RGB_current_mode); - rgblight_step(); - RGB_current_mode = rgblight_config.mode; - } - #endif - return false; - case RGBRST: - #ifdef RGBLIGHT_ENABLE - if (record->event.pressed) { - eeconfig_update_rgblight_default(); - rgblight_enable(); - RGB_current_mode = rgblight_config.mode; - } - #endif - break; - } - return true; -} |