summaryrefslogtreecommitdiff
path: root/keyboards/chromatonemini/config.h
diff options
context:
space:
mode:
Diffstat (limited to 'keyboards/chromatonemini/config.h')
-rw-r--r--keyboards/chromatonemini/config.h94
1 files changed, 3 insertions, 91 deletions
diff --git a/keyboards/chromatonemini/config.h b/keyboards/chromatonemini/config.h
index 49b8eef7a8..aa7eeac148 100644
--- a/keyboards/chromatonemini/config.h
+++ b/keyboards/chromatonemini/config.h
@@ -19,27 +19,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
#include "config_common.h"
-/* key matrix size */
-#define MATRIX_ROWS 6
-#define MATRIX_COLS 8
-
-/*
- * Keyboard Matrix Assignments
- *
- * Change this to how you wired your keyboard
- * COLS: AVR pins used for columns, left to right
- * ROWS: AVR pins used for rows, top to bottom
- * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
- * ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
- *
- */
-#define MATRIX_ROW_PINS { E6, D7, C6, D4, D0, D1 }
-#define MATRIX_COL_PINS { F4, F5, F6, F7, B1, B3, B2, B6 }
-#define UNUSED_PINS
-
-/* COL2ROW, ROW2COL */
-#define DIODE_DIRECTION COL2ROW
-
/*
* Split Keyboard specific options, make sure you have 'SPLIT_KEYBOARD = yes' in your rules.mk, and define SOFT_SERIAL_PIN.
*/
@@ -171,63 +150,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
# endif // CONSOLE_ENABLE
#endif // RGB_MATRIX_ENABLE
-/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
-#define DEBOUNCE 5
-
-/* define if matrix has ghost (lacks anti-ghosting diodes) */
-//#define MATRIX_HAS_GHOST
-
-// /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
-// #define LOCKING_SUPPORT_ENABLE
-// /* Locking resynchronize hack */
-// #define LOCKING_RESYNC_ENABLE
-
-/* If defined, GRAVE_ESC will always act as ESC when CTRL is held.
- * This is useful for the Windows task manager shortcut (ctrl+shift+esc).
- */
-//#define GRAVE_ESC_CTRL_OVERRIDE
-
-/*
- * Force NKRO
- *
- * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
- * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
- * makefile for this to work.)
- *
- * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
- * until the next keyboard reset.
- *
- * NKRO may prevent your keystrokes from being detected in the BIOS, but it is
- * fully operational during normal computer usage.
- *
- * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
- * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
- * bootmagic, NKRO mode will always be enabled until it is toggled again during a
- * power-up.
- *
- */
-//#define FORCE_NKRO
-
-/*
- * Feature disable options
- * These options are also useful to firmware size reduction.
- */
-
-/* disable debug print */
-//#define NO_DEBUG
-
-/* disable print */
-//#define NO_PRINT
-
-/* disable action features */
-//#define NO_ACTION_LAYER
-//#define NO_ACTION_TAPPING
-//#define NO_ACTION_ONESHOT
-
-/* Bootmagic Lite key configuration */
-//#define BOOTMAGIC_LITE_ROW 0
-//#define BOOTMAGIC_LITE_COLUMN 0
-
/* Audio */
#ifdef AUDIO_ENABLE
# define AUDIO_PIN B6 // use PB6 = PIN10 as Audio output
@@ -262,19 +184,9 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
# define MIDI_INITIAL_VELOCITY 117
#endif // MIDI_ENABLE
-/*
- * Encoder options
- */
-#ifdef ENCODER_ENABLE
-# define ENCODERS_PAD_A { B5 }
-# define ENCODERS_PAD_B { B4 }
-# define ENCODER_RESOLUTION 4
-# define TAP_CODE_DELAY 10
-
-#define ENCODERS 1
-#define ENCODERS_CW_KEY { {7, 2} }
-#define ENCODERS_CCW_KEY { {7, 1} }
-#endif // ENCODER_ENABLE
+/* disable action features */
+//#define NO_ACTION_LAYER
+//#define NO_ACTION_TAPPING
/* 2021/01/22 added to shrink firmware size */
// NO_ACTION_TAPPING -1964 bytes, however, this disables Layer mods...