summaryrefslogtreecommitdiff
path: root/keyboards/cannonkeys/stm32f072
diff options
context:
space:
mode:
Diffstat (limited to 'keyboards/cannonkeys/stm32f072')
-rw-r--r--keyboards/cannonkeys/stm32f072/keyboard.c241
-rw-r--r--keyboards/cannonkeys/stm32f072/keyboard.h23
-rw-r--r--keyboards/cannonkeys/stm32f072/led.c251
-rw-r--r--keyboards/cannonkeys/stm32f072/led_custom.h8
-rw-r--r--keyboards/cannonkeys/stm32f072/ws2812.c151
5 files changed, 0 insertions, 674 deletions
diff --git a/keyboards/cannonkeys/stm32f072/keyboard.c b/keyboards/cannonkeys/stm32f072/keyboard.c
deleted file mode 100644
index 39f912506d..0000000000
--- a/keyboards/cannonkeys/stm32f072/keyboard.c
+++ /dev/null
@@ -1,241 +0,0 @@
-#include "keyboard.h"
-#include "ch.h"
-#include "hal.h"
-#include "led_custom.h"
-#include "util.h"
-#include "quantum.h"
-
-#include "raw_hid.h"
-#include "dynamic_keymap.h"
-#include "tmk_core/common/eeprom.h"
-#include "version.h" // for QMK_BUILDDATE used in EEPROM magic
-
-#include "via.h"
-#define EEPROM_CUSTOM_BACKLIGHT (VIA_EEPROM_CUSTOM_CONFIG_ADDR)
-
-backlight_config_t kb_backlight_config = {
- .enable = true,
- .breathing = true,
- .level = BACKLIGHT_LEVELS
-};
-
-void backlight_config_save(){
- eeprom_update_byte((uint8_t*)EEPROM_CUSTOM_BACKLIGHT, kb_backlight_config.raw);
-}
-
-void backlight_config_load(){
- kb_backlight_config.raw = eeprom_read_byte((uint8_t*)EEPROM_CUSTOM_BACKLIGHT);
-}
-
-// Called from via_init() if VIA_ENABLE
-// Called from matrix_init_kb() if not VIA_ENABLE
-void via_init_kb(void)
-{
- // If the EEPROM has the magic, the data is good.
- // OK to load from EEPROM.
- if (via_eeprom_is_valid()) {
- backlight_config_load();
- } else {
- // If the EEPROM has not been saved before, or is out of date,
- // save the default values to the EEPROM. Default values
- // come from construction of the backlight_config instance.
- backlight_config_save();
-
- // DO NOT set EEPROM valid here, let caller do this
- }
-}
-
-__attribute__ ((weak))
-void matrix_init_board(void);
-
-void matrix_init_kb(void){
- // If VIA is disabled, we still need to load backlight settings.
- // Call via_init_kb() the same way as via_init(), with setting
- // EEPROM valid afterwards.
-#ifndef VIA_ENABLE
- via_init_kb();
- via_eeprom_set_valid(true);
-#endif // VIA_ENABLE
- backlight_init_ports();
-
- matrix_init_board();
-}
-
-bool process_record_kb(uint16_t keycode, keyrecord_t *record) {
- switch (keycode) {
- case BL_INC:
- if (record->event.pressed) {
- kb_backlight_config.level = kb_backlight_config.level + 1;
- if(kb_backlight_config.level > BACKLIGHT_LEVELS){
- kb_backlight_config.level = BACKLIGHT_LEVELS;
- }
- backlight_set(kb_backlight_config.level);
- backlight_config_save();
- }
- return false;
- case BL_TOGG:
- if (record->event.pressed) {
- kb_backlight_config.enable = !kb_backlight_config.enable;
- if(kb_backlight_config.enable){
- backlight_set(kb_backlight_config.level);
- } else {
- backlight_set(0);
- }
- backlight_config_save();
- }
- return false;
-
- case BL_DEC:
- if (record->event.pressed) {
- if(kb_backlight_config.level <= 1){
- kb_backlight_config.level = 0;
- } else {
- kb_backlight_config.level = kb_backlight_config.level - 1;
- }
- backlight_set(kb_backlight_config.level);
- backlight_config_save();
- }
- return false;
- case BL_BRTG:
- if (record->event.pressed) {
- kb_backlight_config.breathing = !kb_backlight_config.breathing;
- breathing_toggle();
- backlight_config_save();
- }
- return false;
- default:
- break;
- }
-
- return process_record_user(keycode, record);;
-}
-
-#ifdef VIA_ENABLE
-
-void backlight_get_value( uint8_t *data )
-{
- uint8_t *value_id = &(data[0]);
- uint8_t *value_data = &(data[1]);
- switch (*value_id)
- {
- case id_qmk_backlight_brightness:
- {
- // level / BACKLIGHT_LEVELS * 255
- value_data[0] = ((uint16_t)kb_backlight_config.level) * 255 / BACKLIGHT_LEVELS;
- break;
- }
- case id_qmk_backlight_effect:
- {
- value_data[0] = kb_backlight_config.breathing ? 1 : 0;
- break;
- }
- }
-}
-
-void backlight_set_value( uint8_t *data )
-{
- uint8_t *value_id = &(data[0]);
- uint8_t *value_data = &(data[1]);
- switch (*value_id)
- {
- case id_qmk_backlight_brightness:
- {
- // level / 255 * BACKLIGHT_LEVELS
- kb_backlight_config.level = ((uint16_t)value_data[0]) * BACKLIGHT_LEVELS / 255;
- backlight_set(kb_backlight_config.level);
- break;
- }
- case id_qmk_backlight_effect:
- {
- if ( value_data[0] == 0 ) {
- kb_backlight_config.breathing = false;
- breathing_disable();
- } else {
- kb_backlight_config.breathing = true;
- breathing_enable();
- }
- break;
- }
- }
-}
-
-void raw_hid_receive_kb( uint8_t *data, uint8_t length )
-{
- uint8_t *command_id = &(data[0]);
- uint8_t *command_data = &(data[1]);
- switch ( *command_id )
- {
- case id_lighting_set_value:
- {
- backlight_set_value(command_data);
- break;
- }
- case id_lighting_get_value:
- {
- backlight_get_value(command_data);
- break;
- }
- case id_lighting_save:
- {
- backlight_config_save();
- break;
- }
- default:
- {
- // Unhandled message.
- *command_id = id_unhandled;
- break;
- }
- }
- // DO NOT call raw_hid_send(data,length) here, let caller do this
-}
-#endif
-
-//
-// In the case of VIA being disabled, we still need to check if
-// keyboard level EEPROM memory is valid before loading.
-// Thus these are copies of the same functions in VIA, since
-// the backlight settings reuse VIA's EEPROM magic/version,
-// and the ones in via.c won't be compiled in.
-//
-// Yes, this is sub-optimal, and is only here for completeness
-// (i.e. catering to the 1% of people that want wilba.tech LED bling
-// AND want persistent settings BUT DON'T want to use dynamic keymaps/VIA).
-//
-#ifndef VIA_ENABLE
-
-bool via_eeprom_is_valid(void)
-{
- char *p = QMK_BUILDDATE; // e.g. "2019-11-05-11:29:54"
- uint8_t magic0 = ( ( p[2] & 0x0F ) << 4 ) | ( p[3] & 0x0F );
- uint8_t magic1 = ( ( p[5] & 0x0F ) << 4 ) | ( p[6] & 0x0F );
- uint8_t magic2 = ( ( p[8] & 0x0F ) << 4 ) | ( p[9] & 0x0F );
-
- return (eeprom_read_byte( (void*)VIA_EEPROM_MAGIC_ADDR+0 ) == magic0 &&
- eeprom_read_byte( (void*)VIA_EEPROM_MAGIC_ADDR+1 ) == magic1 &&
- eeprom_read_byte( (void*)VIA_EEPROM_MAGIC_ADDR+2 ) == magic2 );
-}
-
-// Sets VIA/keyboard level usage of EEPROM to valid/invalid
-// Keyboard level code (eg. via_init_kb()) should not call this
-void via_eeprom_set_valid(bool valid)
-{
- char *p = QMK_BUILDDATE; // e.g. "2019-11-05-11:29:54"
- uint8_t magic0 = ( ( p[2] & 0x0F ) << 4 ) | ( p[3] & 0x0F );
- uint8_t magic1 = ( ( p[5] & 0x0F ) << 4 ) | ( p[6] & 0x0F );
- uint8_t magic2 = ( ( p[8] & 0x0F ) << 4 ) | ( p[9] & 0x0F );
-
- eeprom_update_byte( (void*)VIA_EEPROM_MAGIC_ADDR+0, valid ? magic0 : 0xFF);
- eeprom_update_byte( (void*)VIA_EEPROM_MAGIC_ADDR+1, valid ? magic1 : 0xFF);
- eeprom_update_byte( (void*)VIA_EEPROM_MAGIC_ADDR+2, valid ? magic2 : 0xFF);
-}
-
-void via_eeprom_reset(void)
-{
- // Set the VIA specific EEPROM state as invalid.
- via_eeprom_set_valid(false);
- // Set the TMK/QMK EEPROM state as invalid.
- eeconfig_disable();
-}
-
-#endif // VIA_ENABLE
diff --git a/keyboards/cannonkeys/stm32f072/keyboard.h b/keyboards/cannonkeys/stm32f072/keyboard.h
deleted file mode 100644
index 81dd1b704e..0000000000
--- a/keyboards/cannonkeys/stm32f072/keyboard.h
+++ /dev/null
@@ -1,23 +0,0 @@
-#pragma once
-
-#include "quantum.h"
-
-typedef union {
- uint8_t raw;
- struct {
- bool enable :1;
- bool breathing : 1;
- uint8_t level :6;
- };
-} backlight_config_t;
-
-// Backlighting
-extern backlight_config_t kb_backlight_config;
-extern bool kb_backlight_breathing;
-void backlight_init_ports(void);
-void backlight_set(uint8_t level);
-bool is_breathing(void);
-void breathing_enable(void);
-void breathing_disable(void);
-void backlight_config_load(void);
-void backlight_config_save(void);
diff --git a/keyboards/cannonkeys/stm32f072/led.c b/keyboards/cannonkeys/stm32f072/led.c
deleted file mode 100644
index 5c7df47da7..0000000000
--- a/keyboards/cannonkeys/stm32f072/led.c
+++ /dev/null
@@ -1,251 +0,0 @@
-/*
-Copyright 2012 Jun Wako <wakojun@gmail.com>
-
-This program is free software: you can redistribute it and/or modify
-it under the terms of the GNU General Public License as published by
-the Free Software Foundation, either version 2 of the License, or
-(at your option) any later version.
-
-This program is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-GNU General Public License for more details.
-
-You should have received a copy of the GNU General Public License
-along with this program. If not, see <http://www.gnu.org/licenses/>.
-*/
-
-#include "hal.h"
-#include "led_custom.h"
-#include "keyboard.h"
-#include "printf.h"
-
-static void breathing_callback(PWMDriver *pwmp);
-
-static PWMConfig pwmCFG = {
- 0xFFFF, /* PWM clock frequency */
- 256, /* PWM period (in ticks) 1S (1/10kHz=0.1mS 0.1ms*10000 ticks=1S) */
- NULL, /* No Callback */
- {
- {PWM_OUTPUT_ACTIVE_HIGH, NULL}, /* Enable Channel 0 */
- {PWM_OUTPUT_DISABLED, NULL},
- {PWM_OUTPUT_DISABLED, NULL},
- {PWM_OUTPUT_DISABLED, NULL}
- },
- 0, /* HW dependent part.*/
- 0
-};
-
-static PWMConfig pwmCFG_breathing = {
- 0xFFFF, /* 10kHz PWM clock frequency */
- 256, /* PWM period (in ticks) 1S (1/10kHz=0.1mS 0.1ms*10000 ticks=1S) */
- breathing_callback, /* Breathing Callback */
- {
- {PWM_OUTPUT_ACTIVE_HIGH, NULL}, /* Enable Channel 0 */
- {PWM_OUTPUT_DISABLED, NULL},
- {PWM_OUTPUT_DISABLED, NULL},
- {PWM_OUTPUT_DISABLED, NULL}
- },
- 0, /* HW dependent part.*/
- 0
-};
-
-// See http://jared.geek.nz/2013/feb/linear-led-pwm
-static uint16_t cie_lightness(uint16_t v) {
- if (v <= 5243) // if below 8% of max
- return v / 9; // same as dividing by 900%
- else {
- uint32_t y = (((uint32_t) v + 10486) << 8) / (10486 + 0xFFFFUL); // add 16% of max and compare
- // to get a useful result with integer division, we shift left in the expression above
- // and revert what we've done again after squaring.
- y = y * y * y >> 8;
- if (y > 0xFFFFUL) // prevent overflow
- return 0xFFFFU;
- else
- return (uint16_t) y;
- }
-}
-
-
-uint8_t get_backlight_level(void){
- return kb_backlight_config.level;
-}
-
-void backlight_init_ports(void) {
- printf("backlight_init_ports()\n");
- palSetPadMode(GPIOA, 6, PAL_MODE_ALTERNATE(1));
- pwmStart(&PWMD3, &pwmCFG);
- // pwmEnableChannel(&PWMD3, 0, PWM_FRACTION_TO_WIDTH(&PWMD3, 0xFFFF,cie_lightness(0xFFFF)));
- if(kb_backlight_config.enable){
- backlight_set(kb_backlight_config.level);
- if(kb_backlight_config.breathing){
- breathing_enable();
- }
- } else {
- backlight_set(0);
- }
-
-}
-
-void backlight_set(uint8_t level) {
- printf("backlight_set(%d)\n", level);
- uint32_t duty = (uint32_t)(cie_lightness(0xFFFF * (uint32_t) level / BACKLIGHT_LEVELS));
- printf("duty: (%d)\n", duty);
- if (level == 0) {
- // Turn backlight off
- pwmDisableChannel(&PWMD3, 0);
- } else {
- // Turn backlight on
- if(!is_breathing()){
- pwmEnableChannel(&PWMD3, 0, PWM_FRACTION_TO_WIDTH(&PWMD3,0xFFFF,duty));
- }
- }
-}
-
-
-uint8_t backlight_tick = 0;
-
-void backlight_task(void) {
-}
-
-#define BREATHING_NO_HALT 0
-#define BREATHING_HALT_OFF 1
-#define BREATHING_HALT_ON 2
-#define BREATHING_STEPS 128
-
-static uint8_t breathing_period = BREATHING_PERIOD;
-static uint8_t breathing_halt = BREATHING_NO_HALT;
-static uint16_t breathing_counter = 0;
-
-bool is_breathing(void) {
- return PWMD3.config == &pwmCFG_breathing;
-}
-
-#define breathing_min() do {breathing_counter = 0;} while (0)
-#define breathing_max() do {breathing_counter = breathing_period * 256 / 2;} while (0)
-
-
-void breathing_interrupt_enable(void){
- pwmStop(&PWMD3);
- pwmStart(&PWMD3, &pwmCFG_breathing);
- chSysLockFromISR();
- pwmEnablePeriodicNotification(&PWMD3);
- pwmEnableChannelI(
- &PWMD3,
- 0,
- PWM_FRACTION_TO_WIDTH(
- &PWMD3,
- 0xFFFF,
- 0xFFFF
- )
- );
- chSysUnlockFromISR();
-}
-
-void breathing_interrupt_disable(void){
- pwmStop(&PWMD3);
- pwmStart(&PWMD3, &pwmCFG);
-}
-
-void breathing_enable(void)
-{
- breathing_counter = 0;
- breathing_halt = BREATHING_NO_HALT;
- breathing_interrupt_enable();
-}
-
-void breathing_pulse(void)
-{
- if (get_backlight_level() == 0)
- breathing_min();
- else
- breathing_max();
- breathing_halt = BREATHING_HALT_ON;
- breathing_interrupt_enable();
-}
-
-void breathing_disable(void)
-{
- printf("breathing_disable()\n");
- breathing_interrupt_disable();
- // Restore backlight level
- backlight_set(get_backlight_level());
-}
-
-void breathing_self_disable(void)
-{
- if (get_backlight_level() == 0)
- breathing_halt = BREATHING_HALT_OFF;
- else
- breathing_halt = BREATHING_HALT_ON;
-}
-
-void breathing_toggle(void) {
- if (is_breathing()){
- printf("disable breathing\n");
- breathing_disable();
- } else {
- printf("enable breathing\n");
- breathing_enable();
- }
-}
-
-void breathing_period_set(uint8_t value)
-{
- if (!value)
- value = 1;
- breathing_period = value;
-}
-
-void breathing_period_default(void) {
- breathing_period_set(BREATHING_PERIOD);
-}
-
-void breathing_period_inc(void)
-{
- breathing_period_set(breathing_period+1);
-}
-
-void breathing_period_dec(void)
-{
- breathing_period_set(breathing_period-1);
-}
-
-/* To generate breathing curve in python:
- * from math import sin, pi; [int(sin(x/128.0*pi)**4*255) for x in range(128)]
- */
-static const uint8_t breathing_table[BREATHING_STEPS] = {0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 2, 3, 4, 5, 6, 8, 10, 12, 15, 17, 20, 24, 28, 32, 36, 41, 46, 51, 57, 63, 70, 76, 83, 91, 98, 106, 113, 121, 129, 138, 146, 154, 162, 170, 178, 185, 193, 200, 207, 213, 220, 225, 231, 235, 240, 244, 247, 250, 252, 253, 254, 255, 254, 253, 252, 250, 247, 244, 240, 235, 231, 225, 220, 213, 207, 200, 193, 185, 178, 170, 162, 154, 146, 138, 129, 121, 113, 106, 98, 91, 83, 76, 70, 63, 57, 51, 46, 41, 36, 32, 28, 24, 20, 17, 15, 12, 10, 8, 6, 5, 4, 3, 2, 1, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0};
-
-// Use this before the cie_lightness function.
-static inline uint16_t scale_backlight(uint16_t v) {
- return v / BACKLIGHT_LEVELS * get_backlight_level();
-}
-
-static void breathing_callback(PWMDriver *pwmp)
-{
- (void)pwmp;
- uint16_t interval = (uint16_t) breathing_period * 256 / BREATHING_STEPS;
- // resetting after one period to prevent ugly reset at overflow.
- breathing_counter = (breathing_counter + 1) % (breathing_period * 256);
- uint8_t index = breathing_counter / interval % BREATHING_STEPS;
-
- if (((breathing_halt == BREATHING_HALT_ON) && (index == BREATHING_STEPS / 2)) ||
- ((breathing_halt == BREATHING_HALT_OFF) && (index == BREATHING_STEPS - 1)))
- {
- breathing_interrupt_disable();
- }
-
- uint32_t duty = cie_lightness(scale_backlight(breathing_table[index] * 256));
-
- chSysLockFromISR();
- pwmEnableChannelI(
- &PWMD3,
- 0,
- PWM_FRACTION_TO_WIDTH(
- &PWMD3,
- 0xFFFF,
- duty
- )
- );
- chSysUnlockFromISR();
-}
diff --git a/keyboards/cannonkeys/stm32f072/led_custom.h b/keyboards/cannonkeys/stm32f072/led_custom.h
deleted file mode 100644
index 550d5b84cc..0000000000
--- a/keyboards/cannonkeys/stm32f072/led_custom.h
+++ /dev/null
@@ -1,8 +0,0 @@
-#pragma once
-
-void backlight_task(void);
-void breathing_interrupt_disable(void);
-void breathing_interrupt_enable(void);
-void breathing_toggle(void);
-void breathing_enable(void);
-void breathing_disable(void);
diff --git a/keyboards/cannonkeys/stm32f072/ws2812.c b/keyboards/cannonkeys/stm32f072/ws2812.c
deleted file mode 100644
index b2f2384f2c..0000000000
--- a/keyboards/cannonkeys/stm32f072/ws2812.c
+++ /dev/null
@@ -1,151 +0,0 @@
-#include "ch.h"
-#include "hal.h"
-
-#include "ws2812.h"
-
-#define BYTES_FOR_LED_BYTE 4
-#define NB_COLORS 3
-#define BYTES_FOR_LED BYTES_FOR_LED_BYTE*NB_COLORS
-#define DATA_SIZE BYTES_FOR_LED*NB_LEDS
-#define RESET_SIZE 200
-
-// Define the spi your LEDs are plugged to here
-#define LEDS_SPI WS2812_SPI
-// Define the number of LEDs you wish to control in your LED strip
-#define NB_LEDS RGBLED_NUM
-
-#define LED_SPIRAL 0
-
-static uint8_t txbuf[DATA_SIZE + RESET_SIZE];
-static uint8_t get_protocol_eq(uint8_t data, int pos);
-
-/*
- * This lib is meant to be used asynchronously, thus the colors contained in
- * the txbuf will be sent in loop, so that the colors are always the ones you
- * put in the table (the user thus have less to worry about)
- *
- * Since the data are sent via DMA, and the call to spiSend is a blocking one,
- * the processor ressources are not used to much, if you see your program being
- * too slow, simply add a:
- * chThdSleepMilliseconds(x);
- * after the spiSend, where you increment x untill you are satisfied with your
- * program speed, another trick may be to lower this thread priority : your call
- */
-static THD_WORKING_AREA(LEDS_THREAD_WA, 128);
-static THD_FUNCTION(ledsThread, arg) {
- (void) arg;
- while(1){
- spiSend(&LEDS_SPI, DATA_SIZE + RESET_SIZE, txbuf);
- }
-}
-
-#if LED_SPIRAL
-/*
- * 'Led spiral' is a simple demo in which we put all the leds to the same
- * color, where this color does all the hsv circle in loop.
- * If you want to launch the thread that will chage the led colors to the
- * appropriate value, simply set LED_SPIRAL to 1.
- */
-
-static THD_WORKING_AREA(HSVTRANS_WA, 128);
-static THD_FUNCTION(hsv_transThread, arg) {
- (void) arg;
- hsv_color color = {0, 255, 255};
- while(1){
- color.h += 1;
- color.h %= 256;
- set_leds_color_hsv(color);
- chThdSleepMilliseconds(50);
- }
-}
-#endif
-
-static const SPIConfig spicfg = {
- false,
- NULL,
- GPIOB,
- 15,
- SPI_CR1_BR_1|SPI_CR1_BR_0 // baudrate : fpclk / 8 => 1tick is 0.32us
-};
-
-/*
- * Function used to initialize the driver.
- *
- * Starts by shutting off all the LEDs.
- * Then gets access on the LED_SPI driver.
- * May eventually launch an animation on the LEDs (e.g. a thread setting the
- * txbuff values)
- */
-void leds_init(void){
- for(int i = 0; i < RESET_SIZE; i++)
- txbuf[DATA_SIZE+i] = 0x00;
- spiAcquireBus(&LEDS_SPI); /* Acquire ownership of the bus. */
- spiStart(&LEDS_SPI, &spicfg); /* Setup transfer parameters. */
- spiSelect(&LEDS_SPI); /* Slave Select assertion. */
- chThdCreateStatic(LEDS_THREAD_WA, sizeof(LEDS_THREAD_WA),NORMALPRIO, ledsThread, NULL);
-#if LED_SPIRAL
- chThdCreateStatic(HSVTRANS_WA, sizeof(HSVTRANS_WA),
- NORMALPRIO, hsv_transThread, NULL);
-#endif
-}
-
-/*
- * As the trick here is to use the SPI to send a huge pattern of 0 and 1 to
- * the ws2812b protocol, we use this helper function to translate bytes into
- * 0s and 1s for the LED (with the appropriate timing).
- */
-static uint8_t get_protocol_eq(uint8_t data, int pos){
- uint8_t eq = 0;
- if (data & (1 << (2*(3-pos))))
- eq = 0b1110;
- else
- eq = 0b1000;
- if (data & (2 << (2*(3-pos))))
- eq += 0b11100000;
- else
- eq += 0b10000000;
- return eq;
-}
-
-//
-///*
-// * If you want to set a LED's color in the RGB color space, simply call this
-// * function with a hsv_color containing the desired color and the index of the
-// * led on the LED strip (starting from 0, the first one being the closest the
-// * first plugged to the board)
-// *
-// * Only set the color of the LEDs through the functions given by this API
-// * (unless you really know what you are doing)
-// */
-void set_led_color_rgb(LED_TYPE color, int pos){
- for(int j = 0; j < 4; j++)
- txbuf[BYTES_FOR_LED*pos + j] = get_protocol_eq(color.g, j);
- for(int j = 0; j < 4; j++)
- txbuf[BYTES_FOR_LED*pos + BYTES_FOR_LED_BYTE+j] = get_protocol_eq(color.r, j);
- for(int j = 0; j < 4; j++)
- txbuf[BYTES_FOR_LED*pos + BYTES_FOR_LED_BYTE*2+j] = get_protocol_eq(color.b, j);
-}
-
-
-void WS2812_init(void) {
- leds_init();
-}
-
-void ws2812_setleds(LED_TYPE *ledarray, uint16_t number_of_leds) {
- uint8_t i = 0;
- while (i < number_of_leds) {
- set_led_color_rgb(ledarray[i], i);
- i++;
- }
-}
-
-
-void set_leds_color_rgb(LED_TYPE color){
- for(int i = 0; i < NB_LEDS; i++)
- set_led_color_rgb(color, i);
-}
-
-
-void ws2812_setleds_rgbw(LED_TYPE *ledarray, uint16_t number_of_leds) {
-
-}
generated by cgit v1.2.3 (git 2.25.1) at 2024-07-08 13:13:06 +0000