diff options
Diffstat (limited to 'keyboards/bastardkb/charybdis/4x6')
5 files changed, 107 insertions, 168 deletions
diff --git a/keyboards/bastardkb/charybdis/4x6/keymaps/drashna/config.h b/keyboards/bastardkb/charybdis/4x6/keymaps/drashna/config.h index e29ff644da..cb11ea2748 100644 --- a/keyboards/bastardkb/charybdis/4x6/keymaps/drashna/config.h +++ b/keyboards/bastardkb/charybdis/4x6/keymaps/drashna/config.h @@ -16,99 +16,49 @@ */ #pragma once -#undef PRODUCT -#define PRODUCT "Charybdis (4x6) Blackpill" +#if defined(KEYBOARD_bastardkb_charybdis_4x6_blackpill) +# undef MATRIX_COL_PINS +# define MATRIX_COL_PINS \ + { B0, B1, B12, B3, B4, B5 } -#undef MATRIX_COL_PINS -#define MATRIX_COL_PINS \ - { B0, B1, B12, B3, B4, B5 } -#undef MATRIX_COL_PINS_RIGHT -#define MATRIX_COL_PINS_RIGHT \ - { B0, B1, B12, B3, B4, B5 } +# define USB_VBUS_PIN B10 +# define DEBUG_LED_PIN C13 -#undef MATRIX_ROW_PINS -#define MATRIX_ROW_PINS \ - { B15, A2, B8, A8, B9 } -#undef MATRIX_ROW_PINS_RIGHT -#define MATRIX_ROW_PINS_RIGHT \ - { B15, A2, B8, A8, B9 } +# define AUDIO_PIN B7 +# define AUDIO_PWM_DRIVER PWMD4 +# define AUDIO_PWM_CHANNEL 2 +# define AUDIO_PWM_PAL_MODE 2 +# define AUDIO_INIT_DELAY +# define AUDIO_ENABLE_TONE_MULTIPLEXING +# define AUDIO_TONE_MULTIPLEXING_RATE_DEFAULT 10 +# define SERIAL_USART_SPEED (1 * 1024 * 1024) -#define DIODE_DIRECTION ROW2COL -#define SPLIT_HAND_PIN A3 -#undef MASTER_RIGHT -#define USB_VBUS_PIN B10 +# undef POINTING_DEVICE_CS_PIN +# define POINTING_DEVICE_CS_PIN A15 // b14 +# define PMW33XX_LIFTOFF_DISTANCE 0b1111 +#endif -#undef RGB_DI_PIN -#define RGB_DI_PIN A1 -#define WS2812_EXTERNAL_PULLUP -#define WS2812_PWM_DRIVER PWMD2 -#define WS2812_PWM_CHANNEL 2 -#define WS2812_PWM_PAL_MODE 1 -#define WS2812_EXTERNAL_PULLUP -#define WS2812_DMA_STREAM STM32_DMA1_STREAM1 -#define WS2812_DMA_CHANNEL 3 -#define WS2812_PWM_TARGET_PERIOD 800000 - -#define DEBUG_LED_PIN C13 - -#define AUDIO_PIN B7 -#define AUDIO_PWM_DRIVER PWMD4 -#define AUDIO_PWM_CHANNEL 2 -#define AUDIO_PWM_PAL_MODE 2 -#define AUDIO_INIT_DELAY -#define AUDIO_ENABLE_TONE_MULTIPLEXING -#define AUDIO_TONE_MULTIPLEXING_RATE_DEFAULT 10 - -#undef SOFT_SERIAL_PIN -// #define SERIAL_USART_FULL_DUPLEX // Enable full duplex operation mode. -#define SERIAL_USART_TX_PIN A9 -// #define SERIAL_USART_RX_PIN A3 -// #define SERIAL_USART_DRIVER SD2 -// #define SERIAL_USART_TX_PAL_MODE 7 // Pin "alternate function", see the respective datasheet for the appropriate values for your MCU. default: 7 -// #define SERIAL_USART_RX_PAL_MODE 7 // Pin "alternate function", see the respective datasheet for the appropriate values for your MCU. default: 7 -// #define SERIAL_USART_TIMEOUT 100 // USART driver timeout. default 100 -// #define SERIAL_USART_SPEED 921600 -#define SERIAL_USART_SPEED (1.5 * 1024 * 1024) - -#define CRC8_USE_TABLE -#define CRC8_OPTIMIZE_SPEED - -/* spi config for eeprom and pmw3360 sensor */ -#define SPI_DRIVER SPID1 -#define SPI_SCK_PIN A5 -#define SPI_SCK_PAL_MODE 5 -#define SPI_MOSI_PIN A7 -#define SPI_MOSI_PAL_MODE 5 -#define SPI_MISO_PIN A6 -#define SPI_MISO_PAL_MODE 5 - -#define EXTERNAL_EEPROM_SPI_SLAVE_SELECT_PIN A4 -#define EXTERNAL_EEPROM_SPI_CLOCK_DIVISOR 64 - -#undef PMW33XX_CS_PIN -#define PMW33XX_CS_PIN A15 // b14 -#define PMW33XX_LIFTOFF_DISTANCE 0b1111 #undef ROTATIONAL_TRANSFORM_ANGLE -#define ROTATIONAL_TRANSFORM_ANGLE -65 - -#define CHARYBDIS_MINIMUM_DEFAULT_DPI 1200 -#define CHARYBDIS_DEFAULT_DPI_CONFIG_STEP 400 -#define CHARYBDIS_MINIMUM_SNIPING_DPI 200 -#define CHARYBDIS_SNIPING_DPI_CONFIG_STEP 100 +#define ROTATIONAL_TRANSFORM_ANGLE 25 +#define POINTING_DEVICE_ROTATION_270 /* RGB Matrix. */ - #undef RGB_MATRIX_MAXIMUM_BRIGHTNESS #define RGB_MATRIX_MAXIMUM_BRIGHTNESS 150 +#define CHARYBDIS_MINIMUM_DEFAULT_DPI 1200 +#define CHARYBDIS_DEFAULT_DPI_CONFIG_STEP 400 +#define CHARYBDIS_MINIMUM_SNIPING_DPI 200 +#define CHARYBDIS_SNIPING_DPI_CONFIG_STEP 100 + #define CHARYBDIS_CONFIG_SYNC -#define BOOTMAGIC_LITE_ROW 0 +#define BOOTMAGIC_LITE_ROW 0 #define BOOTMAGIC_LITE_COLUMN 0 -#define BOOTMAGIC_LITE_ROW_RIGHT 5 +#define BOOTMAGIC_LITE_ROW_RIGHT 5 #define BOOTMAGIC_LITE_COLUMN_RIGHT 0 -#define BOOTMAGIC_LITE_EEPROM_ROW 1 +#define BOOTMAGIC_LITE_EEPROM_ROW 1 #define BOOTMAGIC_LITE_EEPROM_COLUMN 0 -#define BOOTMAGIC_LITE_EEPROM_ROW_RIGHT 1 +#define BOOTMAGIC_LITE_EEPROM_ROW_RIGHT 1 #define BOOTMAGIC_LITE_EEPROM_COLUMN_RIGHT 0 diff --git a/keyboards/bastardkb/charybdis/4x6/keymaps/drashna/halconf.h b/keyboards/bastardkb/charybdis/4x6/keymaps/drashna/halconf.h deleted file mode 100644 index 8aad829e5c..0000000000 --- a/keyboards/bastardkb/charybdis/4x6/keymaps/drashna/halconf.h +++ /dev/null @@ -1,26 +0,0 @@ -/* Copyright 2020 Nick Brassel (tzarc) - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 3 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see <https://www.gnu.org/licenses/>. - */ -#pragma once - -#define HAL_USE_PWM TRUE -#define HAL_USE_PAL TRUE -#define HAL_USE_SERIAL TRUE -// #define HAL_USE_I2C TRUE -#define HAL_USE_SPI TRUE -#define SPI_USE_WAIT TRUE -#define SPI_SELECT_MODE SPI_SELECT_MODE_PAD - -#include_next <halconf.h> diff --git a/keyboards/bastardkb/charybdis/4x6/keymaps/drashna/keymap.c b/keyboards/bastardkb/charybdis/4x6/keymaps/drashna/keymap.c index cc6dbc34e9..50a05e1b35 100644 --- a/keyboards/bastardkb/charybdis/4x6/keymaps/drashna/keymap.c +++ b/keyboards/bastardkb/charybdis/4x6/keymaps/drashna/keymap.c @@ -83,12 +83,12 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { SFT_T(KC_SPACE), ALT_T(KC_Q), _______ ), [_MOUSE] = LAYOUT_charybdis_4x6( - _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, - _______, _______, _______, _______, _______, _______, KC_WH_U, DPI_RMOD,DPI_MOD, S_D_RMOD,S_D_MOD, _______, + _______, _______, _______, _______, _______, _______, _______, DPI_RMOD,DPI_MOD, S_D_RMOD,S_D_MOD, _______, + _______, _______, _______, _______, _______, _______, KC_WH_U, _______, _______, _______, _______, DRGSCRL, _______, _______, _______, _______, _______, _______, KC_WH_D, KC_BTN1, KC_BTN3, KC_BTN2, KC_BTN6, SNIPING, - _______, _______, _______, _______, _______, _______, KC_BTN7, KC_BTN4, KC_BTN5, KC_BTN8, DRGSCRL, _______, - _______, SNIPING, SNIPING, _______, _______, - _______, _______, _______ + _______, _______, _______, _______, _______, _______, KC_BTN7, KC_BTN4, KC_BTN5, KC_BTN8, _______, _______, + _______, _______, _______, _______, _______, + _______, _______, _______ ), [_LOWER] = LAYOUT_charybdis_4x6_wrapper( @@ -110,7 +110,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { ), [_ADJUST] = LAYOUT_charybdis_4x6_wrapper( - QK_MAKE, KC_WIDE,KC_AUSSIE,KC_SCRIPT,KC_ZALGO,KC_SUPER, KC_NOMODE,KC_BLOCKS,KC_REGIONAL,TG_GAME,TG_DBLO, QK_BOOT, + QK_MAKE, KC_WIDE,KC_AUSSIE,KC_SCRIPT,KC_ZALGO,KC_SUPER, KC_NOMODE,KC_COMIC,KC_REGIONAL,TG_GAME,TG_DBLO, QK_BOOT, VRSN, _________________ADJUST_L1_________________, _________________ADJUST_R1_________________, EE_CLR, KEYLOCK, _________________ADJUST_L2_________________, _________________ADJUST_R2_________________, TG_MODS, UC_NEXT, _________________ADJUST_L3_________________, _________________ADJUST_R3_________________, KC_MPLY, @@ -121,8 +121,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { // clang-format on -void matrix_init_keymap(void) { - setPinInputHigh(A0); +void keyboard_post_init_keymap(void) { #ifdef RGB_MATRIX_ENABLE g_led_config.flags[53] = g_led_config.flags[54] = g_led_config.flags[55] = g_led_config.flags[0] = g_led_config.flags[1] = g_led_config.flags[2] = g_led_config.flags[3] = @@ -131,11 +130,17 @@ void matrix_init_keymap(void) { #endif } -void matrix_scan_keymap(void) { +#if defined(KEYBOARD_bastardkb_charybdis_4x6_blackpill) +void keyboard_pre_init_keymap(void) { + setPinInputHigh(A0); +} + +void housekeeping_task_keymap(void) { if (!readPin(A0)) { reset_keyboard(); } } +#endif #ifdef USB_VBUS_PIN bool usb_vbus_state(void) { @@ -145,12 +150,13 @@ bool usb_vbus_state(void) { } #endif +#if defined(KEYBOARD_bastardkb_charybdis_4x6_blackpill) void matrix_output_unselect_delay(uint8_t line, bool key_pressed) { for (int32_t i = 0; i < 40; i++) { __asm__ volatile("nop" ::: "memory"); } } - +#endif #ifdef SWAP_HANDS_ENABLE const keypos_t PROGMEM hand_swap_config[MATRIX_ROWS][MATRIX_COLS] = { diff --git a/keyboards/bastardkb/charybdis/4x6/keymaps/drashna/mcuconf.h b/keyboards/bastardkb/charybdis/4x6/keymaps/drashna/mcuconf.h index 4f04811e54..3a23d5f370 100644 --- a/keyboards/bastardkb/charybdis/4x6/keymaps/drashna/mcuconf.h +++ b/keyboards/bastardkb/charybdis/4x6/keymaps/drashna/mcuconf.h @@ -18,23 +18,10 @@ #include_next "mcuconf.h" -#undef STM32_PWM_USE_ADVANCED -#define STM32_PWM_USE_ADVANCED TRUE +#if defined(KEYBOARD_bastardkb_charybdis_4x6_blackpill) +# undef STM32_PWM_USE_ADVANCED +# define STM32_PWM_USE_ADVANCED TRUE -#undef STM32_PWM_USE_TIM1 -#define STM32_PWM_USE_TIM1 TRUE - -#undef STM32_PWM_USE_TIM2 -#define STM32_PWM_USE_TIM2 TRUE - -#undef STM32_PWM_USE_TIM4 -#define STM32_PWM_USE_TIM4 TRUE - -#undef STM32_SPI_USE_SPI1 -#define STM32_SPI_USE_SPI1 TRUE - -#undef STM32_SERIAL_USE_USART1 -#define STM32_SERIAL_USE_USART1 TRUE - -#undef STM32_ST_USE_TIMER -#define STM32_ST_USE_TIMER 5 +# undef STM32_PWM_USE_TIM4 +# define STM32_PWM_USE_TIM4 TRUE +#endif diff --git a/keyboards/bastardkb/charybdis/4x6/keymaps/drashna/rules.mk b/keyboards/bastardkb/charybdis/4x6/keymaps/drashna/rules.mk index d655fbd5dc..12e9cecda0 100644 --- a/keyboards/bastardkb/charybdis/4x6/keymaps/drashna/rules.mk +++ b/keyboards/bastardkb/charybdis/4x6/keymaps/drashna/rules.mk @@ -1,34 +1,56 @@ -# MCU name -MCU = STM32F411 -BOARD = BLACKPILL_STM32_F411 - -# Bootloader selection -BOOTLOADER := tinyuf2 - -BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite -MOUSEKEY_ENABLE = yes # Mouse keys -EXTRAKEY_ENABLE = yes # Audio control and System control -CONSOLE_ENABLE = yes # Console for debug -COMMAND_ENABLE = no # Commands for debug and configuration -NKRO_ENABLE = yes # Enable N-Key Rollover -RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow -AUDIO_ENABLE = yes # Audio output -AUDIO_SUPPORTED = yes # is set to no in kb, needs to be forcibly enabled - -KEYBOARD_SHARED_EP = yes -MOUSE_SHARED_EP = yes - -EEPROM_DRIVER = spi -WS2812_DRIVER = pwm -SERIAL_DRIVER = usart -AUDIO_DRIVER = pwm_hardware -BACKLIGHT_DRIVER = pwm - -AUTOCORRECT_ENABLE = yes -CAPS_WORD_ENABLE = yes -SWAP_HANDS_ENABLE = yes -TAP_DANCE_ENABLE = yes -DEBOUNCE_TYPE = asym_eager_defer_pk -WPM_ENABLE = yes -LTO_ENABLE = no -# OPT = 3 +CUSTOM_UNICODE_ENABLE = no +CUSTOM_POINTING_DEVICE = no +CUSTOM_SPLIT_TRANSPORT_SYNC = no + +ifeq ($(strip $(KEYBOARD)), bastardkb/charybdis/4x6/blackpill) + # MCU name + # Bootloader selection + BOOTLOADER := tinyuf2 + + AUDIO_ENABLE = yes # Audio output + AUDIO_SUPPORTED = yes # is set to no in kb, needs to be forcibly enabled + AUDIO_DRIVER = pwm_hardware + + BACKLIGHT_DRIVER = pwm + + OVERLOAD_FEATURES = yes +endif + +ifeq ($(strip $(KEYBOARD)), bastardkb/charybdis/4x6/v2/stemcell) + OVERLOAD_FEATURES = yes +endif +ifeq ($(strip $(KEYBOARD)), bastardkb/charybdis/4x6/v2/splinky) + OVERLOAD_FEATURES = yes +endif +ifeq ($(strip $(MCU)), atmega32u4) + LTO_ENABLE = yes + BOOTLOADER = qmk-hid + BOOTLOADER_SIZE = 512 +endif + +ifeq ($(strip $(OVERLOAD_FEATURES)), yes) + BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite + MOUSEKEY_ENABLE = yes # Mouse keys + EXTRAKEY_ENABLE = yes # Audio control and System control + CONSOLE_ENABLE = yes # Console for debug + COMMAND_ENABLE = no # Commands for debug and configuration + NKRO_ENABLE = yes # Enable N-Key Rollover + RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow + + KEYBOARD_SHARED_EP = yes + MOUSE_SHARED_EP = yes + + AUTOCORRECT_ENABLE = yes + CAPS_WORD_ENABLE = yes + SWAP_HANDS_ENABLE = yes + TAP_DANCE_ENABLE = yes + DEBOUNCE_TYPE = asym_eager_defer_pk + WPM_ENABLE = yes + LTO_ENABLE = no + # OPT = 3 + + CUSTOM_UNICODE_ENABLE = yes + CUSTOM_POINTING_DEVICE = yes + CUSTOM_SPLIT_TRANSPORT_SYNC = yes + +endif |