summaryrefslogtreecommitdiff
path: root/keyboards/bandominedoni/config.h
diff options
context:
space:
mode:
Diffstat (limited to 'keyboards/bandominedoni/config.h')
-rw-r--r--keyboards/bandominedoni/config.h88
1 files changed, 1 insertions, 87 deletions
diff --git a/keyboards/bandominedoni/config.h b/keyboards/bandominedoni/config.h
index 55608af85e..7a25216afd 100644
--- a/keyboards/bandominedoni/config.h
+++ b/keyboards/bandominedoni/config.h
@@ -15,11 +15,6 @@
*/
#pragma once
-#include "config_common.h"
-
-/* key matrix size */
-#define MATRIX_ROWS 12
-#define MATRIX_COLS 7
/*
* Keyboard Matrix Assignments
@@ -43,38 +38,9 @@
/* COL2ROW, ROW2COL */
#define DIODE_DIRECTION COL2ROW
-/*
- * Split Keyboard specific options, make sure you have 'SPLIT_KEYBOARD = yes' in your rules.mk, and define SOFT_SERIAL_PIN.
- */
-#define SOFT_SERIAL_PIN D2 // or D1, D2, D3, E6
-
#define SPLIT_USB_DETECT
-//#define LED_NUM_LOCK_PIN B0
-//#define LED_CAPS_LOCK_PIN B1
-//#define LED_SCROLL_LOCK_PIN B2
-//#define LED_COMPOSE_PIN B3
-//#define LED_KANA_PIN B4
-
-//#define BACKLIGHT_PIN B7
-//#define BACKLIGHT_LEVELS 3
-//#define BACKLIGHT_BREATHING
-
#define RGB_DI_PIN D3
-//#ifdef RGB_DI_PIN
-//# define RGBLED_NUM 16
-//# define RGBLIGHT_HUE_STEP 8
-//# define RGBLIGHT_SAT_STEP 8
-//# define RGBLIGHT_VAL_STEP 8
-//# define RGBLIGHT_LIMIT_VAL 255 /* The maximum brightness level */
-//# define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */
-/*== customize breathing effect ==*/
-/*==== (DEFAULT) use fixed table instead of exp() and sin() ====*/
-//# define RGBLIGHT_BREATHE_TABLE_SIZE 256 // 256(default) or 128 or 64
-/*==== use exp() and sin() ====*/
-//# define RGBLIGHT_EFFECT_BREATHE_CENTER 1.85 // 1 to 2.7
-//# define RGBLIGHT_EFFECT_BREATHE_MAX 255 // 0 to 255
-//#endif
#ifdef RGB_MATRIX_ENABLE
@@ -165,43 +131,6 @@
# endif // CONSOLE_ENABLE
#endif // RGB_MATRIX_ENABLE
-/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
-#define DEBOUNCE 5
-
-/* define if matrix has ghost (lacks anti-ghosting diodes) */
-//#define MATRIX_HAS_GHOST
-
-/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
-// #define LOCKING_SUPPORT_ENABLE
-/* Locking resynchronize hack */
-// #define LOCKING_RESYNC_ENABLE
-
-/* If defined, GRAVE_ESC will always act as ESC when CTRL is held.
- * This is useful for the Windows task manager shortcut (ctrl+shift+esc).
- */
-//#define GRAVE_ESC_CTRL_OVERRIDE
-
-/*
- * Force NKRO
- *
- * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
- * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
- * makefile for this to work.)
- *
- * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
- * until the next keyboard reset.
- *
- * NKRO may prevent your keystrokes from being detected in the BIOS, but it is
- * fully operational during normal computer usage.
- *
- * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
- * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
- * bootmagic, NKRO mode will always be enabled until it is toggled again during a
- * power-up.
- *
- */
-//#define FORCE_NKRO
-
/*
* Feature disable options
* These options are also useful to firmware size reduction.
@@ -222,25 +151,10 @@
// NO_ACTION_ONESHOT -388 bytes
#define NO_ACTION_ONESHOT
-/* Bootmagic Lite key configuration */
-//#define BOOTMAGIC_LITE_ROW 0
-//#define BOOTMAGIC_LITE_COLUMN 0
-
#ifdef MIDI_ENABLE
# define MIDI_ADVANCED
// Initial velocity value (avoid using 127 since it is used as a special number in some sound sources.)
# define MIDI_INITIAL_VELOCITY 117
#endif // MIDI_ENABLE
-/*
- * Encoder options
- */
-#ifdef ENCODER_ENABLE
-# define ENCODERS_PAD_A { }
-# define ENCODERS_PAD_B { }
-# define ENCODER_RESOLUTIONS { }
-# define ENCODERS_PAD_A_RIGHT { F5 }
-# define ENCODERS_PAD_B_RIGHT { F4 }
-# define ENCODER_RESOLUTIONS_RIGHT { 4 }
-# define TAP_CODE_DELAY 10
-#endif // ENCODER_ENABLE
+#define TAP_CODE_DELAY 10