diff options
Diffstat (limited to 'keyboards/argo_works/ishi/80/mk0_avr/readme.md')
| -rw-r--r-- | keyboards/argo_works/ishi/80/mk0_avr/readme.md | 29 |
1 files changed, 29 insertions, 0 deletions
diff --git a/keyboards/argo_works/ishi/80/mk0_avr/readme.md b/keyboards/argo_works/ishi/80/mk0_avr/readme.md new file mode 100644 index 0000000000..7f7919951e --- /dev/null +++ b/keyboards/argo_works/ishi/80/mk0_avr/readme.md @@ -0,0 +1,29 @@ +# Ishi 80 Mk 0 + + + +Ishi 80 is a 60% keyboard with a SouthPaw, Mirrored Numpad. + +Note: This firmware is for ATMega32U4 based daughterboards with the standard Pro-Micro footprint. It does not support the Encoder and OLED display functionality. + +* Keyboard Maintainer: [Jason Devadoss](https://github.com/jasonj2232) +* Hardware Supported: Ishi80 Mk 0 with standard Pro Micro footprint daughterboards +* Hardware Availability: - + +Make example for this keyboard (after setting up your build environment): + + make argo_works/ishi/80/mk0_avr:default + +Flashing example for this keyboard: + + make argo_works/ishi/80/mk0_avr:default:flash + +See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). + +## Bootloader + +Enter the bootloader in 3 ways: + +* **Bootmagic reset**: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard +* **Physical reset button**: Briefly press the button on the back of the PCB - some may have pads you must short instead +* **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available |