diff options
Diffstat (limited to 'keyboards/4pplet/waffling60/rev_e_iso/readme.md')
| -rw-r--r-- | keyboards/4pplet/waffling60/rev_e_iso/readme.md | 26 |
1 files changed, 26 insertions, 0 deletions
diff --git a/keyboards/4pplet/waffling60/rev_e_iso/readme.md b/keyboards/4pplet/waffling60/rev_e_iso/readme.md new file mode 100644 index 0000000000..03fa4889c6 --- /dev/null +++ b/keyboards/4pplet/waffling60/rev_e_iso/readme.md @@ -0,0 +1,26 @@ +# waffling60 Rev. E ISO + +A 60% PCB for MX switches, one hot swap and one solder-pcb version with decent layout support. Revision E adds underglow and rotary encoder support. + +More info: https://github.com/4pplet/waffling60 + +* Keyboard Maintainer: [4pplet](https://github.com/4pplet) +* Hardware Supported: [waffling60](https://github.com/4pplet/waffling60) + +Make example for this keyboard (after setting up your build environment): + + make 4pplet/waffling60/rev_e_iso:default + +Flashing example for this keyboard: + + make 4pplet/waffling60/rev_e_iso:default:flash + +See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). + +## Bootloader + +How to enter bootloader (DFU): +* Short the reset-header (labled BL/RESET) on the back of the PCB for about 2 seconds for the keyboard to enter DFU. When in DFU, it's ready to flash the firmware. If using a APM MCU it will not automatically reset after flash. Simply short the reset-header for a very short time to just reset the PCB, alternatively unplug and repluck the USB-cable to the keyboard. + +Alternative option if the firmware is already pre-flashed: +* Unplug your keyboard, hold down the Spacebar and B at the same time, plug in your keyboard and wait a second before releasing the keys. The keyboard will enter DFU and is ready to flash the firmware. |