diff options
Diffstat (limited to 'keyboard/planck/keymaps/cbbrowne/keymap.c')
| -rw-r--r-- | keyboard/planck/keymaps/cbbrowne/keymap.c | 142 |
1 files changed, 142 insertions, 0 deletions
diff --git a/keyboard/planck/keymaps/cbbrowne/keymap.c b/keyboard/planck/keymaps/cbbrowne/keymap.c new file mode 100644 index 0000000000..bd09f65c87 --- /dev/null +++ b/keyboard/planck/keymaps/cbbrowne/keymap.c @@ -0,0 +1,142 @@ +#include "planck.h" +#ifdef BACKLIGHT_ENABLE + #include "backlight.h" +#endif + +/* Each layer is given a name to aid in readability, which is then + used in the keymap matrix below. The underscores do not denote + anything - you can have a layer called STUFF or any other name. + + Layer names don't all need to be of the same length, obviously, and + you could also skip them entirely and just use numbers, though that + means needing to manage the numbers. + + It is preferable to keep the symbols short so that a line worth of + key mappings fits compactly onto a line of code. */ + +/* This was originally based on planck/keymaps/default/default.c, and + then cbbrowne has revised things */ + +/* Things I did not like about the default mapping + + - I find control too hard to get to. I think I'll want it on a + left finger. Gonna need to lose something to do that... + - Almost certainly, KC_LCTL should be on [2][1] + - having dash on [lower-j] is a bit nonintuitive, but may be OK + - I'll bet I should switch ESC/TAB + - I'm suspicious that I want to shift M(0) from [4][1] to [4][2], + and shift ESC off the first column so KC_LCTL and KC_LALT can + be on the first column. + - I think I wanna swap ' and ENTER + + - All of the above are done :-) + + - I'm keeping Colemak and Dvorak around for reference, and added + Workman just for fun. They're useless to me, though. +*/ + +/* Other things to do... + + - Need to think about what zsh and readline actions I use lots + - Wanna figure out macros, so I can put in a "cbbrowne" macro + - Ought to ensure that Control-Alt-Delete is convenient enough + - How about Alt-F1 thru Alt-F8? + - What's the keystroke to get from X to console these days? + - I do indeed want a sweet number pad! + - A layer for doing console switching would not be a bad idea +*/ + +enum layers { + _QW = 0, /* Qwerty mapping */ + _CM, /* Colemak */ + _DV, /* Dvorak */ + _WK, /* Workman */ + _LW, /* Lower layer, where top line has symbols !@#$%^&*() */ + _RS, /* Raised layer, where top line has digits 1234567890 */ + _KP, /* Key pad */ +}; + +/* Note that Planck has dimensions 4 rows x 12 columns */ + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { +[_QW] = { /* Qwerty */ + {KC_ESC, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_BSPC}, + {KC_LCTL, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_ENT}, + {KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_QUOT }, + {KC_TAB, M(0), KC_LALT, KC_LGUI, MO(_LW), KC_SPC, KC_SPC, MO(_RS), KC_LEFT, KC_DOWN, KC_UP, KC_RGHT} +}, +[_CM] = { /* Colemak */ + {KC_ESC, KC_Q, KC_W, KC_F, KC_P, KC_G, KC_J, KC_L, KC_U, KC_Y, KC_SCLN, KC_BSPC}, + {KC_LCTL, KC_A, KC_R, KC_S, KC_T, KC_D, KC_H, KC_N, KC_E, KC_I, KC_O, KC_ENT}, + {KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_K, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_QUOT }, + {KC_TAB, M(0), KC_LALT, KC_LGUI, MO(_LW), KC_SPC, KC_SPC, MO(_RS), KC_LEFT, KC_DOWN, KC_UP, KC_RGHT} +}, +[_DV] = { /* Dvorak */ + {KC_ESC, KC_QUOT, KC_COMM, KC_DOT, KC_P, KC_Y, KC_F, KC_G, KC_C, KC_R, KC_L, KC_BSPC}, + {KC_LCTL, KC_A, KC_O, KC_E, KC_U, KC_I, KC_D, KC_H, KC_T, KC_N, KC_S, KC_SLSH}, + {KC_LSFT, KC_SCLN, KC_Q, KC_J, KC_K, KC_X, KC_B, KC_M, KC_W, KC_V, KC_Z, KC_ENT }, + {KC_TAB, M(0), KC_LALT, KC_LGUI, MO(_LW), KC_SPC, KC_SPC, MO(_RS), KC_LEFT, KC_DOWN, KC_UP, KC_RGHT} +}, +[_WK] = { /* Workman */ + {KC_ESC, KC_Q, KC_D, KC_R, KC_W, KC_B, KC_J, KC_F, KC_U, KC_P, KC_SCLN, KC_BSPC}, + {KC_LCTL, KC_A, KC_S, KC_H, KC_T, KC_G, KC_Y, KC_N, KC_E, KC_O, KC_I, KC_ENT}, + {KC_LSFT, KC_Z, KC_X, KC_M, KC_C, KC_V, KC_K, KC_L, KC_COMM, KC_DOT, KC_SLSH, KC_QUOT }, + {KC_TAB, M(0), KC_LALT, KC_LGUI, MO(_LW), KC_SPC, KC_SPC, MO(_RS), KC_LEFT, KC_DOWN, KC_UP, KC_RGHT} +}, +[_RS] = { /* RAISE */ + {KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_BSPC}, + {KC_TRNS, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_MINS, KC_EQL, KC_LBRC, KC_RBRC, KC_BSLS}, + {KC_TRNS, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, DF(_QW), DF(_CM), DF(_WK), RESET, KC_TRNS}, + {KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_MNXT, KC_VOLD, KC_VOLU, KC_MPLY} +}, +[_LW] = { /* LOWER */ + {KC_TILD, KC_EXLM, KC_AT, KC_HASH, KC_DLR, KC_PERC, KC_CIRC, KC_AMPR, KC_ASTR, KC_LPRN, KC_RPRN, KC_BSPC}, + {KC_TRNS, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_UNDS, KC_PLUS, KC_LCBR, KC_RCBR, KC_PIPE}, + {KC_TRNS, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, DF(_QW), DF(_CM), DF(_WK), RESET, KC_TRNS}, + {KC_TRNS, DF(_KP), KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_MNXT, KC_VOLD, KC_VOLU, KC_MPLY} +}, +[_KP] = { /* Key Pad */ + {KC_ESC, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_KP_ENTER, KC_KP_PLUS, KC_KP_PLUS, KC_KP_ENTER, KC_KP_ENTER}, + {KC_LCTL, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_KP_MINUS, KC_7, KC_8, KC_9, KC_KP_DOT}, + {KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_KP_PLUS, KC_4, KC_5, KC_6, KC_0}, + {BL_STEP, M(0), KC_LALT, KC_LGUI, KC_NO, KC_SPC, KC_SPC, DF(_QW), KC_1, KC_2, KC_3, KC_0} +} +}; + +/* I'm planning to use this to set up some macros, including one to + expand into "cbbrowne", more to prove it can be done than anything + else. +*/ + +enum macro_id { + M_P0, + M_P1, + M_P2, + M_P3, + M_P4, + M_P5, + M_USERNAME +}; + + +const uint16_t PROGMEM fn_actions[] = { + +}; + +const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) +{ + // MACRODOWN only works in this function + switch(id) { + case 0: + if (record->event.pressed) { + register_code(KC_RSFT); + #ifdef BACKLIGHT_ENABLE + backlight_step(); + #endif + } else { + unregister_code(KC_RSFT); + } + break; + } + return MACRO_NONE; +}; |