diff options
Diffstat (limited to 'keyboard/lightpad')
| -rw-r--r-- | keyboard/lightpad/Makefile.lufa | 117 | ||||
| -rw-r--r-- | keyboard/lightpad/README.md | 24 | ||||
| -rw-r--r-- | keyboard/lightpad/backlight.c | 129 | ||||
| -rw-r--r-- | keyboard/lightpad/backlight.h | 39 | ||||
| -rw-r--r-- | keyboard/lightpad/config.h | 46 | ||||
| -rw-r--r-- | keyboard/lightpad/keymap.c | 73 | ||||
| -rw-r--r-- | keyboard/lightpad/keymap_lightpad.h | 29 | ||||
| -rw-r--r-- | keyboard/lightpad/led.c | 24 | ||||
| -rw-r--r-- | keyboard/lightpad/matrix.c | 205 |
9 files changed, 0 insertions, 686 deletions
diff --git a/keyboard/lightpad/Makefile.lufa b/keyboard/lightpad/Makefile.lufa deleted file mode 100644 index 88fb90ec4b..0000000000 --- a/keyboard/lightpad/Makefile.lufa +++ /dev/null @@ -1,117 +0,0 @@ -#---------------------------------------------------------------------------- -# On command line: -# -# make all = Make software. -# -# make clean = Clean out built project files. -# -# make coff = Convert ELF to AVR COFF. -# -# make extcoff = Convert ELF to AVR Extended COFF. -# -# make program = Download the hex file to the device. -# Please customize your programmer settings(PROGRAM_CMD) -# -# make teensy = Download the hex file to the device, using teensy_loader_cli. -# (must have teensy_loader_cli installed). -# -# make dfu = Download the hex file to the device, using dfu-programmer (must -# have dfu-programmer installed). -# -# make flip = Download the hex file to the device, using Atmel FLIP (must -# have Atmel FLIP installed). -# -# make dfu-ee = Download the eeprom file to the device, using dfu-programmer -# (must have dfu-programmer installed). -# -# make flip-ee = Download the eeprom file to the device, using Atmel FLIP -# (must have Atmel FLIP installed). -# -# make debug = Start either simulavr or avarice as specified for debugging, -# with avr-gdb or avr-insight as the front end for debugging. -# -# make filename.s = Just compile filename.c into the assembler code only. -# -# make filename.i = Create a preprocessed source file for use in submitting -# bug reports to the GCC project. -# -# To rebuild project do "make clean" then "make all". -#---------------------------------------------------------------------------- - -# Target file name (without extension). -TARGET = lightpad_lufa - -# Directory common source filess exist -TMK_DIR = ../../tmk_core - -# Directory keyboard dependent files exist -TARGET_DIR = . - -# List C source files here. (C dependencies are automatically generated.) -SRC = keymap.c \ - matrix.c \ - led.c \ - backlight.c - -CONFIG_H = config.h - -# MCU name -MCU = atmega32u4 - -# Processor frequency. -# This will define a symbol, F_CPU, in all source code files equal to the -# processor frequency in Hz. You can then use this symbol in your source code to -# calculate timings. Do NOT tack on a 'UL' at the end, this will be done -# automatically to create a 32-bit value in your source code. -# -# This will be an integer division of F_USB below, as it is sourced by -# F_USB after it has run through any CPU prescalers. Note that this value -# does not *change* the processor frequency - it should merely be updated to -# reflect the processor speed set externally so that the code can use accurate -# software delays. -F_CPU = 8000000 - -# -# LUFA specific -# -# Target architecture (see library "Board Types" documentation). -ARCH = AVR8 - -# Input clock frequency. -# This will define a symbol, F_USB, in all source code files equal to the -# input clock frequency (before any prescaling is performed) in Hz. This value may -# differ from F_CPU if prescaling is used on the latter, and is required as the -# raw input clock is fed directly to the PLL sections of the AVR for high speed -# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL' -# at the end, this will be done automatically to create a 32-bit value in your -# source code. -# -# If no clock division is performed on the input clock inside the AVR (via the -# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. -F_USB = $(F_CPU) - -# Build Options -# comment out to disable the options. -# -BOOTMAGIC_ENABLE = yes # Virtual DIP switch configuration(+1000) -#MOUSEKEY_ENABLE = yes # Mouse keys(+4700) -EXTRAKEY_ENABLE = yes # Audio control and System control(+450) -#CONSOLE_ENABLE = yes # Console for debug(+400) -#COMMAND_ENABLE = yes # Commands for debug and configuration -#SLEEP_LED_ENABLE = yes # Breathing sleep LED during USB suspend -#NKRO_ENABLE = yes # USB Nkey Rollover - not yet supported in LUFA -BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality - -# Boot Section Size in bytes -# Teensy halfKay 512 -# Atmel DFU loader 4096 -# LUFA bootloader 4096 -OPT_DEFS += -DBOOTLOADER_SIZE=4096 - -# Search Path -VPATH += $(TARGET_DIR) -VPATH += $(TMK_DIR) - -include $(TMK_DIR)/protocol/lufa.mk -include $(TMK_DIR)/common.mk -include $(TMK_DIR)/rules.mk diff --git a/keyboard/lightpad/README.md b/keyboard/lightpad/README.md deleted file mode 100644 index b21cccc6a2..0000000000 --- a/keyboard/lightpad/README.md +++ /dev/null @@ -1,24 +0,0 @@ -Lightpad keypad firmware -====================== -Korean custom keypad designed by Duck. - -*Note that this is not the official firmware* - - -Supported models ----------------- -All pcb options are supported. - - -Build ------ -Move to this directory then just run `make` like: - - $ make -f Makefile.lufa - - -Bootloader ---------- -The PCB is hardwired to run the bootloader if the key at the `top left` position is held down when connecting the keyboard. - -It is still possible to use Boot Magic and Command to access the bootloader though. diff --git a/keyboard/lightpad/backlight.c b/keyboard/lightpad/backlight.c deleted file mode 100644 index 693c566fc5..0000000000 --- a/keyboard/lightpad/backlight.c +++ /dev/null @@ -1,129 +0,0 @@ -/* -Copyright 2014 Ralf Schmitt <ralf@bunkertor.net> - -This program is free software: you can redistribute it and/or modify -it under the terms of the GNU General Public License as published by -the Free Software Foundation, either version 2 of the License, or -(at your option) any later version. - -This program is distributed in the hope that it will be useful, -but WITHOUT ANY WARRANTY; without even the implied warranty of -MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -GNU General Public License for more details. - -You should have received a copy of the GNU General Public License -along with this program. If not, see <http://www.gnu.org/licenses/>. -*/ - -#include <avr/io.h> -#include "backlight.h" - -/* Backlight pin configuration - * - * FN1 PB0 (low) - * FN2 PB5 (low) - * FN3 PB4 (low) - * FN4 PD7 (low) - * REAR PD6 (high) - * NUMPAD PB2 (high) - * NUMLOCK PB1 (low) - */ -void backlight_init_ports() { - DDRB |= (1<<0) | (1<<1) | (1<<2) | (1<<4) | (1<<5); - DDRD |= (1<<6) | (1<<7); - - backlight_disable_numlock(); -} - -void backlight_set(uint8_t level) { - (level & BACKLIGHT_FN1) ? backlight_enable_fn1() : backlight_disable_fn1(); - (level & BACKLIGHT_FN2) ? backlight_enable_fn2() : backlight_disable_fn2(); - (level & BACKLIGHT_FN3) ? backlight_enable_fn3() : backlight_disable_fn3(); - (level & BACKLIGHT_FN4) ? backlight_enable_fn4() : backlight_disable_fn4(); - (level & BACKLIGHT_NUMPAD) ? backlight_enable_numpad() : backlight_disable_numpad(); - (level & BACKLIGHT_REAR) ? backlight_enable_rear() : backlight_disable_rear(); -} - -void backlight_enable_fn1() { - PORTB &= ~(1<<0); -} - -void backlight_disable_fn1() { - PORTB |= (1<<0); -} - -void backlight_invert_fn1() { - PORTB ^= (1<<0); -} - -void backlight_enable_fn2() { - PORTB &= ~(1<<5); -} - -void backlight_disable_fn2() { - PORTB |= (1<<5); -} - -void backlight_invert_fn2() { - PORTB ^= (1<<5); -} - -void backlight_enable_fn3() { - PORTB &= ~(1<<4); -} - -void backlight_disable_fn3() { - PORTB |= (1<<4); -} - -void backlight_invert_fn3() { - PORTB ^= (1<<4); -} - -void backlight_enable_fn4() { - PORTD &= ~(1<<7); -} - -void backlight_disable_fn4() { - PORTD |= (1<<7); -} - -void backlight_invert_fn4() { - PORTD ^= (1<<7); -} - -void backlight_enable_numpad() { - PORTB |= (1<<2); -} - -void backlight_disable_numpad() { - PORTB &= ~(1<<2); -} - -void backlight_invert_numpad() { - PORTB ^= (1<<2); -} - -void backlight_enable_numlock() { - PORTB &= ~(1<<1); -} - -void backlight_disable_numlock() { - PORTB |= (1<<1); -} - -void backlight_invert_numlock() { - PORTB ^= (1<<1); -} - -void backlight_enable_rear() { - PORTD |= (1<<6); -} - -void backlight_disable_rear() { - PORTD &= ~(1<<6); -} - -void backlight_invert_rear() { - PORTD ^= (1<<6); -} diff --git a/keyboard/lightpad/backlight.h b/keyboard/lightpad/backlight.h deleted file mode 100644 index 3b3cfd9aea..0000000000 --- a/keyboard/lightpad/backlight.h +++ /dev/null @@ -1,39 +0,0 @@ - -enum backlight_level { - BACKLIGHT_FN1 = 0b0000001, - BACKLIGHT_FN2 = 0b0000010, - BACKLIGHT_FN3 = 0b0000100, - BACKLIGHT_FN4 = 0b0001000, - BACKLIGHT_NUMPAD = 0b0010000, - BACKLIGHT_REAR = 0b0100000, -}; - -void backlight_init_ports(void); - -void backlight_invert_fn1(void); -void backlight_enable_fn1(void); -void backlight_disable_fn1(void); - -void backlight_invert_fn2(void); -void backlight_enable_fn2(void); -void backlight_disable_fn2(void); - -void backlight_invert_fn3(void); -void backlight_enable_fn3(void); -void backlight_disable_fn3(void); - -void backlight_invert_fn4(void); -void backlight_enable_fn4(void); -void backlight_disable_fn4(void); - -void backlight_invert_numlock(void); -void backlight_enable_numlock(void); -void backlight_disable_numlock(void); - -void backlight_enable_numpad(void); -void backlight_disable_numpad(void); -void backlight_invert_numpad(void); - -void backlight_enable_rear(void); -void backlight_disable_rear(void); -void backlight_invert_rear(void); diff --git a/keyboard/lightpad/config.h b/keyboard/lightpad/config.h deleted file mode 100644 index 7f5a596c0c..0000000000 --- a/keyboard/lightpad/config.h +++ /dev/null @@ -1,46 +0,0 @@ -/* -Copyright 2014 Ralf Schmitt <ralf@bunkertor.net> - -This program is free software: you can redistribute it and/or modify -it under the terms of the GNU General Public License as published by -the Free Software Foundation, either version 2 of the License, or -(at your option) any later version. - -This program is distributed in the hope that it will be useful, -but WITHOUT ANY WARRANTY; without even the implied warranty of -MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -GNU General Public License for more details. - -You should have received a copy of the GNU General Public License -along with this program. If not, see <http://www.gnu.org/licenses/>. -*/ - -#ifndef CONFIG_H -#define CONFIG_H - -/* USB Device descriptor parameter */ -#define VENDOR_ID 0xFEED -#define PRODUCT_ID 0x6050 -#define DEVICE_VER 0x0104 -#define MANUFACTURER Duck -#define PRODUCT Lightpad - -/* message strings */ -#define DESCRIPTION t.m.k. keyboard firmware for Lightpad - -/* matrix size */ -#define MATRIX_ROWS 6 -#define MATRIX_COLS 4 - -/* number of backlight levels */ -#define BACKLIGHT_LEVELS 1 - -/* Set 0 if need no debouncing */ -#define DEBOUNCE 5 - -/* key combination for command */ -#define IS_COMMAND() ( \ - keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \ -) - -#endif diff --git a/keyboard/lightpad/keymap.c b/keyboard/lightpad/keymap.c deleted file mode 100644 index 2ca79a81b5..0000000000 --- a/keyboard/lightpad/keymap.c +++ /dev/null @@ -1,73 +0,0 @@ -/* -Copyright 2014 Ralf Schmitt <ralf@bunkertor.net> - -This program is free software: you can redistribute it and/or modify -it under the terms of the GNU General Public License as published by -the Free Software Foundation, either version 2 of the License, or -(at your option) any later version. - -This program is distributed in the hope that it will be useful, -but WITHOUT ANY WARRANTY; without even the implied warranty of -MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -GNU General Public License for more details. - -You should have received a copy of the GNU General Public License -along with this program. If not, see <http://www.gnu.org/licenses/>. -*/ - -#include <stdint.h> -#include <stdbool.h> -#include <avr/pgmspace.h> -#include "keycode.h" -#include "action.h" -#include "action_macro.h" -#include "report.h" -#include "host.h" -#include "debug.h" -#include "keymap.h" - -/* Map physical keyboard layout to matrix array */ -#define KEYMAP( \ - K5A, K5B, K5C, K5D, \ - K4A, K4B, K4C, K4D, \ - K3A, K3B, K3C, K3D, \ - K2A, K2B, K2C, \ - K1A, K1B, K1C, K1D, \ - K0A, K0B, K0C \ -) { \ -/* 0 1 2 3 */ \ -/* 5 */ { KC_##K5A, KC_##K5B, KC_##K5C, KC_##K5D}, \ -/* 4 */ { KC_##K4A, KC_##K4B, KC_##K4C, KC_##K4D}, \ -/* 3 */ { KC_##K3A, KC_##K3B, KC_##K3C, KC_##K3D}, \ -/* 2 */ { KC_##K2A, KC_##K2B, KC_##K2C, KC_NO}, \ -/* 1 */ { KC_##K1A, KC_##K1B, KC_##K1C, KC_##K1D}, \ -/* 0 */ { KC_##K0A, KC_##K0B, KC_##K0C, KC_NO, } \ -} - -#include "keymap_lightpad.h" - -#define KEYMAPS_SIZE (sizeof(keymaps) / sizeof(keymaps[0])) -#define FN_ACTIONS_SIZE (sizeof(fn_actions) / sizeof(fn_actions[0])) - -/* translates key to keycode */ -uint8_t keymap_key_to_keycode(uint8_t layer, keypos_t key) -{ - if (layer < KEYMAPS_SIZE) { - return pgm_read_byte(&keymaps[(layer)][(key.row)][(key.col)]); - } else { - // fall back to layer 0 - return pgm_read_byte(&keymaps[0][(key.row)][(key.col)]); - } -} - -/* translates Fn keycode to action */ -action_t keymap_fn_to_action(uint8_t keycode) -{ - action_t action; - if (FN_INDEX(keycode) < FN_ACTIONS_SIZE) { - action.code = pgm_read_word(&fn_actions[FN_INDEX(keycode)]); - } else { - action.code = ACTION_NO; - } - return action; -} diff --git a/keyboard/lightpad/keymap_lightpad.h b/keyboard/lightpad/keymap_lightpad.h deleted file mode 100644 index 9333964e39..0000000000 --- a/keyboard/lightpad/keymap_lightpad.h +++ /dev/null @@ -1,29 +0,0 @@ -#include "backlight.h" - -static const uint8_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { - KEYMAP(\ - FN0, F1, DEL, BSPC, \ - NLCK,PSLS,PAST,PMNS, \ - P7, P8, P9, PPLS, \ - P4, P5, P6, \ - P1, P2, P3, PENT, \ - P0, NO, PDOT), \ - KEYMAP(\ - TRNS,PGDN,PGUP,MUTE, \ - MSEL,MPRV,MNXT,VOLD, \ - P7, P8, P9, VOLU, \ - FN4, FN5, FN6, \ - FN1, FN2, FN3, MPLY, \ - FN7, NO, MSTP) -}; - -static const uint16_t PROGMEM fn_actions[] = { - [0] = ACTION_LAYER_MOMENTARY(1), - [1] = ACTION_BACKLIGHT_LEVEL(BACKLIGHT_FN1), - [2] = ACTION_BACKLIGHT_LEVEL(BACKLIGHT_FN2), - [3] = ACTION_BACKLIGHT_LEVEL(BACKLIGHT_FN3), - [4] = ACTION_BACKLIGHT_LEVEL(BACKLIGHT_FN4), - [5] = ACTION_BACKLIGHT_LEVEL(BACKLIGHT_NUMPAD), - [6] = ACTION_BACKLIGHT_LEVEL(BACKLIGHT_REAR), - [7] = ACTION_BACKLIGHT_TOGGLE() -}; diff --git a/keyboard/lightpad/led.c b/keyboard/lightpad/led.c deleted file mode 100644 index ebfac3af89..0000000000 --- a/keyboard/lightpad/led.c +++ /dev/null @@ -1,24 +0,0 @@ -/* -Copyright 2014 Ralf Schmitt <ralf@bunkertor.net> - -This program is free software: you can redistribute it and/or modify -it under the terms of the GNU General Public License as published by -the Free Software Foundation, either version 2 of the License, or -(at your option) any later version. - -This program is distributed in the hope that it will be useful, -but WITHOUT ANY WARRANTY; without even the implied warranty of -MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -GNU General Public License for more details. - -You should have received a copy of the GNU General Public License -along with this program. If not, see <http://www.gnu.org/licenses/>. -*/ - -#include <avr/io.h> -#include "stdint.h" -#include "led.h" - -void led_set(uint8_t usb_led) { - (usb_led & (1<<USB_LED_NUM_LOCK)) ? backlight_enable_numlock() : backlight_disable_numlock(); -} diff --git a/keyboard/lightpad/matrix.c b/keyboard/lightpad/matrix.c deleted file mode 100644 index 87d338395b..0000000000 --- a/keyboard/lightpad/matrix.c +++ /dev/null @@ -1,205 +0,0 @@ -/* -Copyright 2014 Ralf Schmitt <ralf@bunkertor.net> - -This program is free software: you can redistribute it and/or modify -it under the terms of the GNU General Public License as published by -the Free Software Foundation, either version 2 of the License, or -(at your option) any later version. - -This program is distributed in the hope that it will be useful, -but WITHOUT ANY WARRANTY; without even the implied warranty of -MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -GNU General Public License for more details. - -You should have received a copy of the GNU General Public License -along with this program. If not, see <http://www.gnu.org/licenses/>. -*/ - -#include <stdint.h> -#include <stdbool.h> -#include <avr/io.h> -#include <util/delay.h> -#include "print.h" -#include "debug.h" -#include "util.h" -#include "matrix.h" -#include "eeconfig.h" -#include "action_layer.h" -#include "backlight.h" - -#ifndef DEBOUNCE -# define DEBOUNCE 0 -#endif -static uint8_t debouncing = DEBOUNCE; - -static matrix_row_t matrix[MATRIX_ROWS]; -static matrix_row_t matrix_debouncing[MATRIX_ROWS]; - -static uint8_t read_rows(void); -static uint8_t read_fwkey(void); -static void init_rows(void); -static void unselect_cols(void); -static void select_col(uint8_t col); - -inline -uint8_t matrix_rows(void) -{ - return MATRIX_ROWS; -} - -inline -uint8_t matrix_cols(void) -{ - return MATRIX_COLS; -} - -void misc_init(void) { -} - -void matrix_init(void) -{ - backlight_init_ports(); - unselect_cols(); - init_rows(); - for (uint8_t i=0; i < MATRIX_ROWS; i++) { - matrix[i] = 0; - matrix_debouncing[i] = 0; - } -} - -uint8_t matrix_scan(void) -{ - for (uint8_t col = 0; col < MATRIX_COLS; col++) { - select_col(col); - _delay_us(3); - uint8_t rows = read_rows(); - // Use the otherwise unused col: 0 row: 0 for firmware key - if(col == 0) { - rows |= read_fwkey(); - } - for (uint8_t row = 0; row < MATRIX_ROWS; row++) { - bool prev_bit = matrix_debouncing[row] & ((matrix_row_t)1<<col); - bool curr_bit = rows & (1<<row); - if (prev_bit != curr_bit) { - matrix_debouncing[row] ^= ((matrix_row_t)1<<col); - if (debouncing) { - dprint("bounce!: "); dprintf("%02X", debouncing); dprintln(); - } - debouncing = DEBOUNCE; - } - } - unselect_cols(); - } - - if (debouncing) { - if (--debouncing) { - _delay_ms(1); - } else { - for (uint8_t i = 0; i < MATRIX_ROWS; i++) { - matrix[i] = matrix_debouncing[i]; - } - } - } - - return 1; -} - -bool matrix_is_modified(void) -{ - if (debouncing) return false; - return true; -} - -inline -bool matrix_is_on(uint8_t row, uint8_t col) -{ - return (matrix[row] & ((matrix_row_t)1<<col)); -} - -inline -matrix_row_t matrix_get_row(uint8_t row) -{ - return matrix[row]; -} - -void matrix_print(void) -{ - print("\nr/c 0123456789ABCDEF\n"); - for (uint8_t row = 0; row < MATRIX_ROWS; row++) { - xprintf("%02X: %032lb\n", row, bitrev32(matrix_get_row(row))); - } -} - -uint8_t matrix_key_count(void) -{ - uint8_t count = 0; - for (uint8_t i = 0; i < MATRIX_ROWS; i++) { - count += bitpop32(matrix[i]); - } - return count; -} - -/* Row configuration - * - * row: 0 1 2 3 4 5 - * pin: PD0 PD1 PD2 PD3 PD5 PB7 - * - * Firmware uses pin PE2 - */ -static void init_rows(void) -{ - DDRD &= ~0b00101111; - PORTD |= 0b00101111; - - DDRB &= ~0b10000000; - PORTB |= 0b10000000; - - DDRE &= ~0b00000100; - PORTE |= 0b00000100; -} - -static uint8_t read_rows(void) -{ - return (PIND&(1<<0) ? (1<<0) : 0) | - (PIND&(1<<1) ? (1<<1) : 0) | - (PIND&(1<<2) ? (1<<2) : 0) | - (PIND&(1<<3) ? (1<<3) : 0) | - (PIND&(1<<5) ? (1<<4) : 0) | - (PINB&(1<<7) ? (1<<5) : 0); -} - -static uint8_t read_fwkey(void) -{ - return PINE&(1<<2) ? 0 : (1<<0); -} - -/* Column configuration - * - * col: 0 1 2 3 - * pin: PF0 PF1 PC7 PC6 - */ -static void unselect_cols(void) -{ - DDRF |= 0b00000011; - PORTF &= ~0b00000011; - DDRC |= 0b11000000; - PORTC &= ~0b11000000; -} - -static void select_col(uint8_t col) -{ - switch (col) { - case 0: - PORTF |= (1<<0); - break; - case 1: - PORTF |= (1<<1); - break; - case 2: - PORTC |= (1<<7); - break; - case 3: - PORTC |= (1<<6); - break; - } -} |