summaryrefslogtreecommitdiff
path: root/keyboard/hhkb/doc/HHKB.txt
diff options
context:
space:
mode:
Diffstat (limited to 'keyboard/hhkb/doc/HHKB.txt')
-rw-r--r--keyboard/hhkb/doc/HHKB.txt36
1 files changed, 19 insertions, 17 deletions
diff --git a/keyboard/hhkb/doc/HHKB.txt b/keyboard/hhkb/doc/HHKB.txt
index f99a074437..422c452c90 100644
--- a/keyboard/hhkb/doc/HHKB.txt
+++ b/keyboard/hhkb/doc/HHKB.txt
@@ -30,25 +30,27 @@ Connector Cable
Two PCBs are connected by 15 lines(13 in case of Pro2).
Vcc and GND use 3(2) lines each, other 9 lines are for keyboard signaling.
- Keyswitch PCB connector Teensy++ pins
- -------------------------------------------------------------------------------
- 1 Vcc(5V) Not exist on Pro2 5V
- 2 Vcc(5V) 5V
- 3 Vcc(5V) 5V
- 4 TP1684 KEY: Low(0) when key pressed PE6 input(with pullup)
- 5 TP1684 KEY_PREV: assert previous key state??? PE7 output
- 6 HC4051 A(bit0) select 8 rows(0 to 7) PB0 output
- 7 HC4051 B(bit1) PB1 output
- 8 HC4051 C(bit2) PB2 output
- 9 LS145 A(bit0) select 8 columns(0 to 7) PB3 output
- 10 LS145 B(bit1) PB4 output
- 11 LS145 C(bit2) PB5 output
- 12 LS145 D(enable) Low(0) enable selected column PB6 output
- 13 GND GND
- 14 GND GND
- 15 GND Not exist on Pro2 GND
+ Keyswitch connector
+ pro pro2 Description Teensy++ pins
+ --------------------------------------------------------------------------------------------
+ 1 Vcc(5V) Not exist on Pro2 5V
+ 2 1 Vcc(5V) 5V
+ 3 2 Vcc(5V) 5V
+ 4 3 TP1684 KEY: Low(0) when key pressed PE6 input(with pullup)
+ 5 4 TP1684 KEY_PREV: make threshold PE7 output
+ 6 5 HC4051 A(bit0)\ PB0 output
+ 7 6 HC4051 B(bit1) > select row(0 to 7) PB1 output
+ 8 7 HC4051 C(bit2)/ PB2 output
+ 9 8 LS145 A(bit0)\ PB3 output
+ 10 9 LS145 B(bit1) > select column(0 to 7) PB4 output
+ 11 10 LS145 C(bit2)/ PB5 output
+ 12 11 LS145 D(enable) Low(0) enables selected column PB6 output
+ 13 12 GND GND
+ 14 13 GND GND
+ 15 GND Not exist on Pro2 GND
NOTE: guessing pin5(KEY_PREV) may work for hysteresis of capacitive sensing.
+ NOTE: 1KOhm didn't work as pullup resistor on KEY. AVR internal pullup or 10KOhm resistor was OK.
(HHKB_connector.jpg)