diff options
Diffstat (limited to 'drivers/led/issi/is31fl3737.c')
| -rw-r--r-- | drivers/led/issi/is31fl3737.c | 227 |
1 files changed, 227 insertions, 0 deletions
diff --git a/drivers/led/issi/is31fl3737.c b/drivers/led/issi/is31fl3737.c new file mode 100644 index 0000000000..30906b4840 --- /dev/null +++ b/drivers/led/issi/is31fl3737.c @@ -0,0 +1,227 @@ +/* Copyright 2017 Jason Williams + * Copyright 2018 Jack Humbert + * Copyright 2018 Yiancar + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#include "is31fl3737.h" +#include "i2c_master.h" +#include "wait.h" +#include "progmem.h" + +// This is a 7-bit address, that gets left-shifted and bit 0 +// set to 0 for write, 1 for read (as per I2C protocol) +// The address will vary depending on your wiring: +// 00 <-> GND +// 01 <-> SCL +// 10 <-> SDA +// 11 <-> VCC +// ADDR1 represents A1:A0 of the 7-bit address. +// ADDR2 represents A3:A2 of the 7-bit address. +// The result is: 0b101(ADDR2)(ADDR1) +#define ISSI_ADDR_DEFAULT 0x50 + +#define ISSI_COMMANDREGISTER 0xFD +#define ISSI_COMMANDREGISTER_WRITELOCK 0xFE +#define ISSI_INTERRUPTMASKREGISTER 0xF0 +#define ISSI_INTERRUPTSTATUSREGISTER 0xF1 + +#define ISSI_PAGE_LEDCONTROL 0x00 // PG0 +#define ISSI_PAGE_PWM 0x01 // PG1 +#define ISSI_PAGE_AUTOBREATH 0x02 // PG2 +#define ISSI_PAGE_FUNCTION 0x03 // PG3 + +#define ISSI_REG_CONFIGURATION 0x00 // PG3 +#define ISSI_REG_GLOBALCURRENT 0x01 // PG3 +#define ISSI_REG_RESET 0x11 // PG3 +#define ISSI_REG_SWPULLUP 0x0F // PG3 +#define ISSI_REG_CSPULLUP 0x10 // PG3 + +#ifndef ISSI_TIMEOUT +# define ISSI_TIMEOUT 100 +#endif + +#ifndef ISSI_PERSISTENCE +# define ISSI_PERSISTENCE 0 +#endif + +// Transfer buffer for TWITransmitData() +uint8_t g_twi_transfer_buffer[20]; + +// These buffers match the IS31FL3737 PWM registers. +// The control buffers match the PG0 LED On/Off registers. +// Storing them like this is optimal for I2C transfers to the registers. +// We could optimize this and take out the unused registers from these +// buffers and the transfers in IS31FL3737_write_pwm_buffer() but it's +// probably not worth the extra complexity. + +uint8_t g_pwm_buffer[DRIVER_COUNT][192]; +bool g_pwm_buffer_update_required[DRIVER_COUNT] = {false}; + +uint8_t g_led_control_registers[DRIVER_COUNT][24] = {0}; +bool g_led_control_registers_update_required[DRIVER_COUNT] = {false}; + +void IS31FL3737_write_register(uint8_t addr, uint8_t reg, uint8_t data) { + g_twi_transfer_buffer[0] = reg; + g_twi_transfer_buffer[1] = data; + +#if ISSI_PERSISTENCE > 0 + for (uint8_t i = 0; i < ISSI_PERSISTENCE; i++) { + if (i2c_transmit(addr << 1, g_twi_transfer_buffer, 2, ISSI_TIMEOUT) == 0) break; + } +#else + i2c_transmit(addr << 1, g_twi_transfer_buffer, 2, ISSI_TIMEOUT); +#endif +} + +void IS31FL3737_write_pwm_buffer(uint8_t addr, uint8_t *pwm_buffer) { + // assumes PG1 is already selected + + // transmit PWM registers in 12 transfers of 16 bytes + // g_twi_transfer_buffer[] is 20 bytes + + // iterate over the pwm_buffer contents at 16 byte intervals + for (int i = 0; i < 192; i += 16) { + g_twi_transfer_buffer[0] = i; + // copy the data from i to i+15 + // device will auto-increment register for data after the first byte + // thus this sets registers 0x00-0x0F, 0x10-0x1F, etc. in one transfer + for (int j = 0; j < 16; j++) { + g_twi_transfer_buffer[1 + j] = pwm_buffer[i + j]; + } + +#if ISSI_PERSISTENCE > 0 + for (uint8_t i = 0; i < ISSI_PERSISTENCE; i++) { + if (i2c_transmit(addr << 1, g_twi_transfer_buffer, 17, ISSI_TIMEOUT) == 0) break; + } +#else + i2c_transmit(addr << 1, g_twi_transfer_buffer, 17, ISSI_TIMEOUT); +#endif + } +} + +void IS31FL3737_init(uint8_t addr) { + // In order to avoid the LEDs being driven with garbage data + // in the LED driver's PWM registers, shutdown is enabled last. + // Set up the mode and other settings, clear the PWM registers, + // then disable software shutdown. + + // Unlock the command register. + IS31FL3737_write_register(addr, ISSI_COMMANDREGISTER_WRITELOCK, 0xC5); + + // Select PG0 + IS31FL3737_write_register(addr, ISSI_COMMANDREGISTER, ISSI_PAGE_LEDCONTROL); + // Turn off all LEDs. + for (int i = 0x00; i <= 0x17; i++) { + IS31FL3737_write_register(addr, i, 0x00); + } + + // Unlock the command register. + IS31FL3737_write_register(addr, ISSI_COMMANDREGISTER_WRITELOCK, 0xC5); + + // Select PG1 + IS31FL3737_write_register(addr, ISSI_COMMANDREGISTER, ISSI_PAGE_PWM); + // Set PWM on all LEDs to 0 + // No need to setup Breath registers to PWM as that is the default. + for (int i = 0x00; i <= 0xBF; i++) { + IS31FL3737_write_register(addr, i, 0x00); + } + + // Unlock the command register. + IS31FL3737_write_register(addr, ISSI_COMMANDREGISTER_WRITELOCK, 0xC5); + + // Select PG3 + IS31FL3737_write_register(addr, ISSI_COMMANDREGISTER, ISSI_PAGE_FUNCTION); + // Set global current to maximum. + IS31FL3737_write_register(addr, ISSI_REG_GLOBALCURRENT, 0xFF); + // Disable software shutdown. + IS31FL3737_write_register(addr, ISSI_REG_CONFIGURATION, 0x01); + + // Wait 10ms to ensure the device has woken up. + wait_ms(10); +} + +void IS31FL3737_set_color(int index, uint8_t red, uint8_t green, uint8_t blue) { + if (index >= 0 && index < DRIVER_LED_TOTAL) { + // copy the led config from progmem to SRAM + is31_led led; + memcpy_P(&led, (&g_is31_leds[index]), sizeof(led)); + + g_pwm_buffer[led.driver][led.r] = red; + g_pwm_buffer[led.driver][led.g] = green; + g_pwm_buffer[led.driver][led.b] = blue; + g_pwm_buffer_update_required[led.driver] = true; + } +} + +void IS31FL3737_set_color_all(uint8_t red, uint8_t green, uint8_t blue) { + for (int i = 0; i < DRIVER_LED_TOTAL; i++) { + IS31FL3737_set_color(i, red, green, blue); + } +} + +void IS31FL3737_set_led_control_register(uint8_t index, bool red, bool green, bool blue) { + // copy the led config from progmem to SRAM + is31_led led; + memcpy_P(&led, (&g_is31_leds[index]), sizeof(led)); + + uint8_t control_register_r = led.r / 8; + uint8_t control_register_g = led.g / 8; + uint8_t control_register_b = led.b / 8; + uint8_t bit_r = led.r % 8; + uint8_t bit_g = led.g % 8; + uint8_t bit_b = led.b % 8; + + if (red) { + g_led_control_registers[led.driver][control_register_r] |= (1 << bit_r); + } else { + g_led_control_registers[led.driver][control_register_r] &= ~(1 << bit_r); + } + if (green) { + g_led_control_registers[led.driver][control_register_g] |= (1 << bit_g); + } else { + g_led_control_registers[led.driver][control_register_g] &= ~(1 << bit_g); + } + if (blue) { + g_led_control_registers[led.driver][control_register_b] |= (1 << bit_b); + } else { + g_led_control_registers[led.driver][control_register_b] &= ~(1 << bit_b); + } + + g_led_control_registers_update_required[led.driver] = true; +} + +void IS31FL3737_update_pwm_buffers(uint8_t addr, uint8_t index) { + if (g_pwm_buffer_update_required[index]) { + // Firstly we need to unlock the command register and select PG1 + IS31FL3737_write_register(addr, ISSI_COMMANDREGISTER_WRITELOCK, 0xC5); + IS31FL3737_write_register(addr, ISSI_COMMANDREGISTER, ISSI_PAGE_PWM); + + IS31FL3737_write_pwm_buffer(addr, g_pwm_buffer[index]); + } + g_pwm_buffer_update_required[index] = false; +} + +void IS31FL3737_update_led_control_registers(uint8_t addr, uint8_t index) { + if (g_led_control_registers_update_required[index]) { + // Firstly we need to unlock the command register and select PG0 + IS31FL3737_write_register(addr, ISSI_COMMANDREGISTER_WRITELOCK, 0xC5); + IS31FL3737_write_register(addr, ISSI_COMMANDREGISTER, ISSI_PAGE_LEDCONTROL); + for (int i = 0; i < 24; i++) { + IS31FL3737_write_register(addr, i, g_led_control_registers[index][i]); + } + } + g_led_control_registers_update_required[index] = false; +} |