diff options
Diffstat (limited to 'drivers/led/issi/is31fl3736-mono.c')
| -rw-r--r-- | drivers/led/issi/is31fl3736-mono.c | 244 |
1 files changed, 244 insertions, 0 deletions
diff --git a/drivers/led/issi/is31fl3736-mono.c b/drivers/led/issi/is31fl3736-mono.c new file mode 100644 index 0000000000..5ced65aa06 --- /dev/null +++ b/drivers/led/issi/is31fl3736-mono.c @@ -0,0 +1,244 @@ +/* Copyright 2018 Jason Williams (Wilba) + * Copyright 2021 Doni Crosby + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#include "is31fl3736-mono.h" +#include <string.h> +#include "i2c_master.h" +#include "wait.h" + +#define IS31FL3736_PWM_REGISTER_COUNT 192 // actually 96 +#define IS31FL3736_LED_CONTROL_REGISTER_COUNT 24 + +#ifndef IS31FL3736_I2C_TIMEOUT +# define IS31FL3736_I2C_TIMEOUT 100 +#endif + +#ifndef IS31FL3736_I2C_PERSISTENCE +# define IS31FL3736_I2C_PERSISTENCE 0 +#endif + +#ifndef IS31FL3736_PWM_FREQUENCY +# define IS31FL3736_PWM_FREQUENCY IS31FL3736_PWM_FREQUENCY_8K4_HZ // PFS - IS31FL3736B only +#endif + +#ifndef IS31FL3736_SW_PULLUP +# define IS31FL3736_SW_PULLUP IS31FL3736_PUR_0_OHM +#endif + +#ifndef IS31FL3736_CS_PULLDOWN +# define IS31FL3736_CS_PULLDOWN IS31FL3736_PDR_0_OHM +#endif + +#ifndef IS31FL3736_GLOBAL_CURRENT +# define IS31FL3736_GLOBAL_CURRENT 0xFF +#endif + +uint8_t i2c_transfer_buffer[20]; + +// These buffers match the IS31FL3736 PWM registers. +// The control buffers match the page 0 LED On/Off registers. +// Storing them like this is optimal for I2C transfers to the registers. +// We could optimize this and take out the unused registers from these +// buffers and the transfers in is31fl3736_write_pwm_buffer() but it's +// probably not worth the extra complexity. +uint8_t g_pwm_buffer[IS31FL3736_DRIVER_COUNT][IS31FL3736_PWM_REGISTER_COUNT]; +bool g_pwm_buffer_update_required[IS31FL3736_DRIVER_COUNT] = {false}; + +uint8_t g_led_control_registers[IS31FL3736_DRIVER_COUNT][IS31FL3736_LED_CONTROL_REGISTER_COUNT] = {0}; +bool g_led_control_registers_update_required[IS31FL3736_DRIVER_COUNT] = {false}; + +void is31fl3736_write_register(uint8_t addr, uint8_t reg, uint8_t data) { + i2c_transfer_buffer[0] = reg; + i2c_transfer_buffer[1] = data; + +#if IS31FL3736_I2C_PERSISTENCE > 0 + for (uint8_t i = 0; i < IS31FL3736_I2C_PERSISTENCE; i++) { + if (i2c_transmit(addr << 1, i2c_transfer_buffer, 2, IS31FL3736_I2C_TIMEOUT) == 0) break; + } +#else + i2c_transmit(addr << 1, i2c_transfer_buffer, 2, IS31FL3736_I2C_TIMEOUT); +#endif +} + +void is31fl3736_select_page(uint8_t addr, uint8_t page) { + is31fl3736_write_register(addr, IS31FL3736_REG_COMMAND_WRITE_LOCK, IS31FL3736_COMMAND_WRITE_LOCK_MAGIC); + is31fl3736_write_register(addr, IS31FL3736_REG_COMMAND, page); +} + +void is31fl3736_write_pwm_buffer(uint8_t addr, uint8_t *pwm_buffer) { + // assumes page 1 is already selected + + // transmit PWM registers in 12 transfers of 16 bytes + // i2c_transfer_buffer[] is 20 bytes + + // iterate over the pwm_buffer contents at 16 byte intervals + for (int i = 0; i < IS31FL3736_PWM_REGISTER_COUNT; i += 16) { + i2c_transfer_buffer[0] = i; + // copy the data from i to i+15 + // device will auto-increment register for data after the first byte + // thus this sets registers 0x00-0x0F, 0x10-0x1F, etc. in one transfer + memcpy(i2c_transfer_buffer + 1, pwm_buffer + i, 16); + +#if IS31FL3736_I2C_PERSISTENCE > 0 + for (uint8_t i = 0; i < IS31FL3736_I2C_PERSISTENCE; i++) { + if (i2c_transmit(addr << 1, i2c_transfer_buffer, 17, IS31FL3736_I2C_TIMEOUT) == 0) break; + } +#else + i2c_transmit(addr << 1, i2c_transfer_buffer, 17, IS31FL3736_I2C_TIMEOUT); +#endif + } +} + +void is31fl3736_init_drivers(void) { + i2c_init(); + + is31fl3736_init(IS31FL3736_I2C_ADDRESS_1); +#if defined(IS31FL3736_I2C_ADDRESS_2) + is31fl3736_init(IS31FL3736_I2C_ADDRESS_2); +# if defined(IS31FL3736_I2C_ADDRESS_3) + is31fl3736_init(IS31FL3736_I2C_ADDRESS_3); +# if defined(IS31FL3736_I2C_ADDRESS_4) + is31fl3736_init(IS31FL3736_I2C_ADDRESS_4); +# endif +# endif +#endif + + for (int i = 0; i < IS31FL3736_LED_COUNT; i++) { + is31fl3736_set_led_control_register(i, true); + } + + is31fl3736_update_led_control_registers(IS31FL3736_I2C_ADDRESS_1, 0); +#if defined(IS31FL3736_I2C_ADDRESS_2) + is31fl3736_update_led_control_registers(IS31FL3736_I2C_ADDRESS_2, 1); +# if defined(IS31FL3736_I2C_ADDRESS_3) + is31fl3736_update_led_control_registers(IS31FL3736_I2C_ADDRESS_3, 2); +# if defined(IS31FL3736_I2C_ADDRESS_4) + is31fl3736_update_led_control_registers(IS31FL3736_I2C_ADDRESS_4, 3); +# endif +# endif +#endif +} + +void is31fl3736_init(uint8_t addr) { + // In order to avoid the LEDs being driven with garbage data + // in the LED driver's PWM registers, shutdown is enabled last. + // Set up the mode and other settings, clear the PWM registers, + // then disable software shutdown. + + is31fl3736_select_page(addr, IS31FL3736_COMMAND_LED_CONTROL); + + // Turn off all LEDs. + for (int i = 0; i < IS31FL3736_LED_CONTROL_REGISTER_COUNT; i++) { + is31fl3736_write_register(addr, i, 0x00); + } + + is31fl3736_select_page(addr, IS31FL3736_COMMAND_PWM); + + // Set PWM on all LEDs to 0 + // No need to setup Breath registers to PWM as that is the default. + for (int i = 0; i < IS31FL3736_PWM_REGISTER_COUNT; i++) { + is31fl3736_write_register(addr, i, 0x00); + } + + is31fl3736_select_page(addr, IS31FL3736_COMMAND_FUNCTION); + + // Set de-ghost pull-up resistors (SWx) + is31fl3736_write_register(addr, IS31FL3736_FUNCTION_REG_SW_PULLUP, IS31FL3736_SW_PULLUP); + // Set de-ghost pull-down resistors (CSx) + is31fl3736_write_register(addr, IS31FL3736_FUNCTION_REG_CS_PULLDOWN, IS31FL3736_CS_PULLDOWN); + // Set global current to maximum. + is31fl3736_write_register(addr, IS31FL3736_FUNCTION_REG_GLOBAL_CURRENT, IS31FL3736_GLOBAL_CURRENT); + // Disable software shutdown. + is31fl3736_write_register(addr, IS31FL3736_FUNCTION_REG_CONFIGURATION, ((IS31FL3736_PWM_FREQUENCY & 0b111) << 3) | 0x01); + + // Wait 10ms to ensure the device has woken up. + wait_ms(10); +} + +void is31fl3736_set_value(int index, uint8_t value) { + is31fl3736_led_t led; + if (index >= 0 && index < IS31FL3736_LED_COUNT) { + memcpy_P(&led, (&g_is31fl3736_leds[index]), sizeof(led)); + + if (g_pwm_buffer[led.driver][led.v] == value) { + return; + } + g_pwm_buffer[led.driver][led.v] = value; + g_pwm_buffer_update_required[led.driver] = true; + } +} + +void is31fl3736_set_value_all(uint8_t value) { + for (int i = 0; i < IS31FL3736_LED_COUNT; i++) { + is31fl3736_set_value(i, value); + } +} + +void is31fl3736_set_led_control_register(uint8_t index, bool value) { + is31fl3736_led_t led; + memcpy_P(&led, (&g_is31fl3736_leds[index]), sizeof(led)); + + // The PWM register for a matrix position (0x00 to 0xBF) is interleaved, so: + // A1=0x00 A2=0x02 A3=0x04 A4=0x06 A5=0x08 A6=0x0A A7=0x0C A8=0x0E + // B1=0x10 B2=0x12 B3=0x14 + // But also, the LED control registers (0x00 to 0x17) are also interleaved, so: + // A1-A4=0x00 A5-A8=0x01 + + uint8_t control_register = led.v / 8; + uint8_t bit_value = led.v % 8; + + if (value) { + g_led_control_registers[led.driver][control_register] |= (1 << bit_value); + } else { + g_led_control_registers[led.driver][control_register] &= ~(1 << bit_value); + } + + g_led_control_registers_update_required[led.driver] = true; +} + +void is31fl3736_update_pwm_buffers(uint8_t addr, uint8_t index) { + if (g_pwm_buffer_update_required[index]) { + is31fl3736_select_page(addr, IS31FL3736_COMMAND_PWM); + + is31fl3736_write_pwm_buffer(addr, g_pwm_buffer[index]); + g_pwm_buffer_update_required[index] = false; + } +} + +void is31fl3736_update_led_control_registers(uint8_t addr, uint8_t index) { + if (g_led_control_registers_update_required[index]) { + is31fl3736_select_page(addr, IS31FL3736_COMMAND_LED_CONTROL); + + for (int i = 0; i < IS31FL3736_LED_CONTROL_REGISTER_COUNT; i++) { + is31fl3736_write_register(addr, i, g_led_control_registers[index][i]); + } + g_led_control_registers_update_required[index] = false; + } +} + +void is31fl3736_flush(void) { + is31fl3736_update_pwm_buffers(IS31FL3736_I2C_ADDRESS_1, 0); +#if defined(IS31FL3736_I2C_ADDRESS_2) + is31fl3736_update_pwm_buffers(IS31FL3736_I2C_ADDRESS_2, 1); +# if defined(IS31FL3736_I2C_ADDRESS_3) + is31fl3736_update_pwm_buffers(IS31FL3736_I2C_ADDRESS_3, 2); +# if defined(IS31FL3736_I2C_ADDRESS_4) + is31fl3736_update_pwm_buffers(IS31FL3736_I2C_ADDRESS_4, 3); +# endif +# endif +#endif +} |