diff options
Diffstat (limited to 'docs')
-rw-r--r-- | docs/feature_rgb_matrix.md | 36 |
1 files changed, 18 insertions, 18 deletions
diff --git a/docs/feature_rgb_matrix.md b/docs/feature_rgb_matrix.md index 76c5c4f90b..be12c26756 100644 --- a/docs/feature_rgb_matrix.md +++ b/docs/feature_rgb_matrix.md @@ -170,31 +170,31 @@ Configure the hardware via your `config.h`: | Variable | Description | Default | |----------|-------------|---------| -| `ISSI_TIMEOUT` | (Optional) How long to wait for i2c messages, in milliseconds | 100 | -| `ISSI_PERSISTENCE` | (Optional) Retry failed messages this many times | 0 | -| `ISSI_PWM_FREQUENCY` | (Optional) PWM Frequency Setting - IS31FL3736B only | 0 | -| `ISSI_GLOBALCURRENT` | (Optional) Configuration for the Global Current Register | 0xFF | -| `ISSI_SWPULLUP` | (Optional) Set the value of the SWx lines on-chip de-ghosting resistors | PUR_0R (Disabled) | -| `ISSI_CSPULLUP` | (Optional) Set the value of the CSx lines on-chip de-ghosting resistors | PUR_0R (Disabled) | -| `DRIVER_COUNT` | (Required) How many RGB driver IC's are present | | +| `IS31FL3736_I2C_TIMEOUT` | (Optional) How long to wait for i2c messages, in milliseconds | 100 | +| `IS31FL3736_PERSISTENCE` | (Optional) Retry failed messages this many times | 0 | +| `IS31FL3736_PWM_FREQUENCY` | (Optional) PWM Frequency Setting - IS31FL3736B only | 0 | +| `IS31FL3736_GLOBALCURRENT` | (Optional) Configuration for the Global Current Register | 0xFF | +| `IS31FL3736_SWPULLUP` | (Optional) Set the value of the SWx lines on-chip de-ghosting resistors | PUR_0R (Disabled) | +| `IS31FL3736_CSPULLUP` | (Optional) Set the value of the CSx lines on-chip de-ghosting resistors | PUR_0R (Disabled) | +| `IS31FL3736_DRIVER_COUNT` | (Required) How many RGB driver IC's are present | | | `RGB_MATRIX_LED_COUNT` | (Required) How many RGB lights are present across all drivers | | | `DRIVER_ADDR_1` | (Required) Address for the first RGB driver | | | `DRIVER_ADDR_2` | (Optional) Address for the second RGB driver | | | `DRIVER_ADDR_3` | (Optional) Address for the third RGB driver | | | `DRIVER_ADDR_4` | (Optional) Address for the fourth RGB driver | | -The IS31FL3736 IC's have on-chip resistors that can be enabled to allow for de-ghosting of the RGB matrix. By default these resistors are not enabled (`ISSI_SWPULLUP`/`ISSI_CSPULLUP` are given the value of`PUR_0R`), the values that can be set to enable de-ghosting are as follows: +The IS31FL3736 IC's have on-chip resistors that can be enabled to allow for de-ghosting of the RGB matrix. By default these resistors are not enabled (`IS31FL3736_SWPULLUP`/`IS31FL3736_CSPULLUP` are given the value of `IS31FL3736_PUR_0R`), the values that can be set to enable de-ghosting are as follows: -| `ISSI_SWPULLUP/ISSI_CSPULLUP` | Description | +| `IS31FL3736_SWPULLUP/IS31FL3736_CSPULLUP` | Description | |----------------------|-------------| -| `PUR_0R` | (default) Do not use the on-chip resistors/enable de-ghosting | -| `PUR_05KR` | The 0.5k Ohm resistor used during blanking period (t_NOL) | -| `PUR_1KR` | The 1k Ohm resistor used during blanking period (t_NOL) | -| `PUR_2KR` | The 2k Ohm resistor used during blanking period (t_NOL) | -| `PUR_4KR` | The 4k Ohm resistor used during blanking period (t_NOL) | -| `PUR_8KR` | The 8k Ohm resistor during blanking period (t_NOL) | -| `PUR_16KR` | The 16k Ohm resistor during blanking period (t_NOL) | -| `PUR_32KR` | The 32k Ohm resistor used during blanking period (t_NOL) | +| `IS31FL3736_PUR_0R` | (default) Do not use the on-chip resistors/enable de-ghosting | +| `IS31FL3736_PUR_05KR` | The 0.5k Ohm resistor used during blanking period (t_NOL) | +| `IS31FL3736_PUR_1KR` | The 1k Ohm resistor used during blanking period (t_NOL) | +| `IS31FL3736_PUR_2KR` | The 2k Ohm resistor used during blanking period (t_NOL) | +| `IS31FL3736_PUR_4KR` | The 4k Ohm resistor used during blanking period (t_NOL) | +| `IS31FL3736_PUR_8KR` | The 8k Ohm resistor during blanking period (t_NOL) | +| `IS31FL3736_PUR_16KR` | The 16k Ohm resistor during blanking period (t_NOL) | +| `IS31FL3736_PUR_32KR` | The 32k Ohm resistor used during blanking period (t_NOL) | Here is an example using 2 drivers. @@ -211,7 +211,7 @@ Here is an example using 2 drivers. #define DRIVER_ADDR_1 0b1010000 #define DRIVER_ADDR_2 0b1010001 -#define DRIVER_COUNT 2 +#define IS31FL3736_DRIVER_COUNT 2 #define DRIVER_1_LED_TOTAL 30 #define DRIVER_2_LED_TOTAL 32 #define RGB_MATRIX_LED_COUNT (DRIVER_1_LED_TOTAL + DRIVER_2_LED_TOTAL) |