diff options
32 files changed, 553 insertions, 163 deletions
diff --git a/keyboards/mechlovin/hannah910/config.h b/keyboards/mechlovin/hannah910/config.h index 1ff7dfd0b2..c61693599d 100644 --- a/keyboards/mechlovin/hannah910/config.h +++ b/keyboards/mechlovin/hannah910/config.h @@ -20,12 +20,10 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #include "config_common.h" /* USB Device descriptor parameter */ -#define VENDOR_ID 0xFEED -#define PRODUCT_ID 0x0000 -#define DEVICE_VER 0x0001 -#define MANUFACTURER Mechlovin -#define PRODUCT Hannah910 -#define DESCRIPTION A replace PCB for TGR910 keyboard +#define VENDOR_ID 0x4D4C // ML-MechLovin' +#define MANUFACTURER Mechlovin +#define PRODUCT Mechlovin Hannah910 +#define DESCRIPTION Mechlovin Hannah910 /* key matrix size */ #define MATRIX_ROWS 5 @@ -54,32 +52,8 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #define BACKLIGHT_LEVELS 3 #define RGB_DI_PIN E2 -// #ifdef RGB_DI_PIN -#define RGBLED_NUM 9 -// #define RGBLIGHT_HUE_STEP 8 -// #define RGBLIGHT_SAT_STEP 8 -// #define RGBLIGHT_VAL_STEP 8 -#define RGBLIGHT_LIMIT_VAL 255 /* The maximum brightness level */ -// #define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */ -// /*== all animations enable ==*/ +#define RGBLIGHT_LIMIT_VAL 255 #define RGBLIGHT_ANIMATIONS -// /*== or choose animations ==*/ -// #define RGBLIGHT_EFFECT_BREATHING -// #define RGBLIGHT_EFFECT_RAINBOW_MOOD -// #define RGBLIGHT_EFFECT_RAINBOW_SWIRL -// #define RGBLIGHT_EFFECT_SNAKE -// #define RGBLIGHT_EFFECT_KNIGHT -// #define RGBLIGHT_EFFECT_CHRISTMAS -// #define RGBLIGHT_EFFECT_STATIC_GRADIENT -// #define RGBLIGHT_EFFECT_RGB_TEST -// #define RGBLIGHT_EFFECT_ALTERNATING -// /*== customize breathing effect ==*/ -// /*==== (DEFAULT) use fixed table instead of exp() and sin() ====*/ -// #define RGBLIGHT_BREATHE_TABLE_SIZE 256 // 256(default) or 128 or 64 -// /*==== use exp() and sin() ====*/ -// #define RGBLIGHT_EFFECT_BREATHE_CENTER 1.85 // 1 to 2.7 -// #define RGBLIGHT_EFFECT_BREATHE_MAX 255 // 0 to 255 -// #endif /* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ #define DEBOUNCE 5 diff --git a/keyboards/mechlovin/hannah910/hannah910.h b/keyboards/mechlovin/hannah910/hannah910.h index 554116721c..de9929bd12 100644 --- a/keyboards/mechlovin/hannah910/hannah910.h +++ b/keyboards/mechlovin/hannah910/hannah910.h @@ -17,54 +17,8 @@ #include "quantum.h" -/* This a shortcut to help you visually see your layout. - * - * The first section contains all of the arguments representing the physical - * layout of the board and position of the keys. - * - * The second converts the arguments into a two-dimensional array which - * represents the switch matrix. - */ -#define LAYOUT_all( \ - k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k10, k11, k12, k13, k14, \ - k15, k16, k17, k18, k19, k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, \ - k30, k31, k32, k33, k34, k35, k36, k37, k38, k39, k40, k41, k42, k43, k45, \ - k46, k47, k48, k49, k50, k51, k52, k53, k54, k55, k56, k57, k58, k59, k60, \ - k61, k62, k63, k64, k65, k66, k67, k68, k69, k70, k71 \ -) \ -{ \ - { k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k10, k11, k12, k13, k14 }, \ - { k15, k16, k17, k18, k19, k20, k21, k22, k23, k24, k25, k26, k27, k28, k29 }, \ - { k30, k31, k32, k33, k34, k35, k36, k37, k38, k39, k40, k41, k42, k43, k45 }, \ - { k46, k47, k48, k49, k50, k51, k52, k53, k54, k55, k56, k57, k58, k59, k60 }, \ - { k61, k62, k63, KC_NO, k64, KC_NO, k65, KC_NO, k66, KC_NO, k67, k68, k69, k70, k71 }, \ -} -#define LAYOUT_iso( \ - k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k10, k11, k12, k13, k14, \ - k15, k16, k17, k18, k19, k20, k21, k22, k23, k24, k25, k26, k27, k29, \ - k30, k31, k32, k33, k34, k35, k36, k37, k38, k39, k40, k41, k42, k43, k45, \ - k46, k47, k48, k49, k50, k51, k52, k53, k54, k55, k56, k57, k58, k59, k60, \ - k61, k62, k63, k65, k67, k68, k69, k70, k71 \ -) \ -{ \ - { k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k10, k11, k12, k13, k14 }, \ - { k15, k16, k17, k18, k19, k20, k21, k22, k23, k24, k25, k26, k27, KC_NO, k29 }, \ - { k30, k31, k32, k33, k34, k35, k36, k37, k38, k39, k40, k41, k42, k43, k45 }, \ - { k46, k47, k48, k49, k50, k51, k52, k53, k54, k55, k56, k57, k58, k59, k60 }, \ - { k61, k62, k63, KC_NO, KC_NO, KC_NO, k65, KC_NO, KC_NO, KC_NO, k67, k68, k69, k70, k71 }, \ -} - -#define LAYOUT_ansi( \ - k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k10, k11, k12, k13, \ - k15, k16, k17, k18, k19, k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, \ - k30, k31, k32, k33, k34, k35, k36, k37, k38, k39, k40, k41, k43, k45, \ - k46, k48, k49, k50, k51, k52, k53, k54, k55, k56, k57, k58, k59, k60, \ - k61, k62, k63, k65, k67, k68, k69, k70, k71 \ -) \ -{ \ - { k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k10, k11, k12, k13, KC_NO }, \ - { k15, k16, k17, k18, k19, k20, k21, k22, k23, k24, k25, k26, k27, k28, k29 }, \ - { k30, k31, k32, k33, k34, k35, k36, k37, k38, k39, k40, k41, KC_NO, k43, k45 }, \ - { k46, KC_NO, k48, k49, k50, k51, k52, k53, k54, k55, k56, k57, k58, k59, k60 }, \ - { k61, k62, k63, KC_NO, KC_NO, KC_NO, k65, KC_NO, KC_NO, KC_NO, k67, k68, k69, k70, k71 }, \ -} +#ifdef KEYBOARD_mechlovin_hannah910_rev1 + #include "rev1.h" +#elif KEYBOARD_mechlovin_hannah910_rev2 + #include "rev2.h" +#endif diff --git a/keyboards/mechlovin/hannah910/keymaps/ansi/config.h b/keyboards/mechlovin/hannah910/keymaps/ansi/config.h deleted file mode 100644 index 3d1156ac06..0000000000 --- a/keyboards/mechlovin/hannah910/keymaps/ansi/config.h +++ /dev/null @@ -1,19 +0,0 @@ -/* Copyright 2019 Mechlovin - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see <http://www.gnu.org/licenses/>. - */ - -#pragma once - -// place overrides here diff --git a/keyboards/mechlovin/hannah910/keymaps/ansi/readme.md b/keyboards/mechlovin/hannah910/keymaps/ansi/readme.md deleted file mode 100644 index b0dfa055c6..0000000000 --- a/keyboards/mechlovin/hannah910/keymaps/ansi/readme.md +++ /dev/null @@ -1 +0,0 @@ -# The ansi keymap for hannah910 diff --git a/keyboards/mechlovin/hannah910/keymaps/default/config.h b/keyboards/mechlovin/hannah910/keymaps/default/config.h deleted file mode 100644 index 3d1156ac06..0000000000 --- a/keyboards/mechlovin/hannah910/keymaps/default/config.h +++ /dev/null @@ -1,19 +0,0 @@ -/* Copyright 2019 Mechlovin - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see <http://www.gnu.org/licenses/>. - */ - -#pragma once - -// place overrides here diff --git a/keyboards/mechlovin/hannah910/keymaps/default/readme.md b/keyboards/mechlovin/hannah910/keymaps/default/readme.md deleted file mode 100644 index 6abbe27c4b..0000000000 --- a/keyboards/mechlovin/hannah910/keymaps/default/readme.md +++ /dev/null @@ -1 +0,0 @@ -# The default keymap for hannah910 diff --git a/keyboards/mechlovin/hannah910/readme.md b/keyboards/mechlovin/hannah910/readme.md index 6cc6b226f1..b16b294a5c 100644 --- a/keyboards/mechlovin/hannah910/readme.md +++ b/keyboards/mechlovin/hannah910/readme.md @@ -4,12 +4,18 @@ Replacement PCB and plate for TGR 910 keyboard -Keyboard Maintainer: [Mechlovin'](https://github.com/mechlovin) -Hardware Supported: TGR910 CE, TGR910 SE -Hardware Availability: [Reddit Group Buy](https://www.reddit.com/r/mechmarket/comments/dhwvbn/gb_1015_update_hannah_910_group_buy_tgr_910/) +* Keyboard Maintainer: [Mechlovin'](https://github.com/mechlovin) +* Hardware Supported: TGR910 CE, TGR910 SE +* Hardware Availability: [Reddit Group Buy](https://www.reddit.com/r/mechmarket/comments/dhwvbn/gb_1015_update_hannah_910_group_buy_tgr_910/) Make example for this keyboard (after setting up your build environment): - make mechlovin/hannah910:default + make mechlovin/hannah910/rev1:default + make mechlovin/hannah910/rev2:default + +Make firmware for keymap with VIA: + + make mechlovin/hannah910/rev1:via + make mechlovin/hannah910/rev2:via See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). diff --git a/keyboards/mechlovin/hannah910/rev1/config.h b/keyboards/mechlovin/hannah910/rev1/config.h new file mode 100644 index 0000000000..906e0c8846 --- /dev/null +++ b/keyboards/mechlovin/hannah910/rev1/config.h @@ -0,0 +1,6 @@ +#pragma once + +#define PRODUCT_ID 0x9101 +#define DEVICE_VER 0x0001 + +#define RGBLED_NUM 9
\ No newline at end of file diff --git a/keyboards/mechlovin/hannah910/info.json b/keyboards/mechlovin/hannah910/rev1/info.json index 7bc6c74414..7bc6c74414 100644 --- a/keyboards/mechlovin/hannah910/info.json +++ b/keyboards/mechlovin/hannah910/rev1/info.json diff --git a/keyboards/mechlovin/hannah910/keymaps/ansi/keymap.c b/keyboards/mechlovin/hannah910/rev1/keymaps/ansi/keymap.c index 97dd7a5f02..c16620a74e 100644 --- a/keyboards/mechlovin/hannah910/keymaps/ansi/keymap.c +++ b/keyboards/mechlovin/hannah910/rev1/keymaps/ansi/keymap.c @@ -23,7 +23,21 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_UP, KC_END, KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_RALT, KC_RCTL, KC_LEFT, KC_DOWN, KC_RGHT ), - [1] = LAYOUT_ansi( /* Base */ + [1] = LAYOUT_ansi( /* Layer2 */ + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS + ), + [2] = LAYOUT_ansi( /* Layer2 */ + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS + ), + [3] = LAYOUT_ansi( /* Layer2 */ KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, diff --git a/keyboards/mechlovin/hannah910/rev1/keymaps/ansi/readme.md b/keyboards/mechlovin/hannah910/rev1/keymaps/ansi/readme.md new file mode 100644 index 0000000000..0b0b0e3fb7 --- /dev/null +++ b/keyboards/mechlovin/hannah910/rev1/keymaps/ansi/readme.md @@ -0,0 +1 @@ +# The ansi keymap for hannah910v1 diff --git a/keyboards/mechlovin/hannah910/keymaps/default/keymap.c b/keyboards/mechlovin/hannah910/rev1/keymaps/default/keymap.c index 48499a111a..ae53cc3f71 100644 --- a/keyboards/mechlovin/hannah910/keymaps/default/keymap.c +++ b/keyboards/mechlovin/hannah910/rev1/keymaps/default/keymap.c @@ -15,15 +15,30 @@ */ #include QMK_KEYBOARD_H + const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { [0] = LAYOUT_all( /* Base */ KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_DEL, KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_INS, - LT(1,KC_CAPS), KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_NUBS, KC_ENT, KC_HOME, - KC_LSFT, KC_NUHS, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_UP, KC_END, + LT(1,KC_CAPS), KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_NUHS, KC_ENT, KC_HOME, + KC_LSFT, KC_NUBS, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_UP, KC_END, KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_SPC, KC_SPC, KC_RALT, KC_RCTL, KC_LEFT, KC_DOWN, KC_RGHT ), - [1] = LAYOUT_all( /* Base */ + [1] = LAYOUT_all( /* Layer2 */ + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS + ), + [2] = LAYOUT_all( /* Layer2 */ + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS + ), + [3] = LAYOUT_all( /* Layer2 */ KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, diff --git a/keyboards/mechlovin/hannah910/rev1/keymaps/default/readme.md b/keyboards/mechlovin/hannah910/rev1/keymaps/default/readme.md new file mode 100644 index 0000000000..fcfadce951 --- /dev/null +++ b/keyboards/mechlovin/hannah910/rev1/keymaps/default/readme.md @@ -0,0 +1 @@ +# The default keymap for hannah910v1 diff --git a/keyboards/mechlovin/hannah910/rev1/keymaps/via/keymap.c b/keyboards/mechlovin/hannah910/rev1/keymaps/via/keymap.c new file mode 100644 index 0000000000..1b91e2aad1 --- /dev/null +++ b/keyboards/mechlovin/hannah910/rev1/keymaps/via/keymap.c @@ -0,0 +1,48 @@ +/* Copyright 2019 Mechlovin + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ +#include QMK_KEYBOARD_H + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + + [0] = LAYOUT_all( /* Base */ + KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_DEL, + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_INS, + LT(1,KC_CAPS), KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_NUHS, KC_ENT, KC_HOME, + KC_LSFT, KC_NUBS, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_UP, KC_END, + KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_SPC, KC_SPC, KC_RALT, KC_RCTL, KC_LEFT, KC_DOWN, KC_RGHT + ), + [1] = LAYOUT_all( /* Layer2 */ + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS + ), + [2] = LAYOUT_all( /* Layer2 */ + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS + ), + [3] = LAYOUT_all( /* Layer2 */ + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS + ), +};
\ No newline at end of file diff --git a/keyboards/mechlovin/hannah910/rev1/keymaps/via/readme.md b/keyboards/mechlovin/hannah910/rev1/keymaps/via/readme.md new file mode 100644 index 0000000000..3e54ca18c5 --- /dev/null +++ b/keyboards/mechlovin/hannah910/rev1/keymaps/via/readme.md @@ -0,0 +1 @@ +# The default keymap (VIA support) for hannah910v1
\ No newline at end of file diff --git a/keyboards/mechlovin/hannah910/rev1/keymaps/via/rules.mk b/keyboards/mechlovin/hannah910/rev1/keymaps/via/rules.mk new file mode 100644 index 0000000000..1e5b99807c --- /dev/null +++ b/keyboards/mechlovin/hannah910/rev1/keymaps/via/rules.mk @@ -0,0 +1 @@ +VIA_ENABLE = yes diff --git a/keyboards/mechlovin/hannah910/rev1/readme.md b/keyboards/mechlovin/hannah910/rev1/readme.md new file mode 100644 index 0000000000..04df333d18 --- /dev/null +++ b/keyboards/mechlovin/hannah910/rev1/readme.md @@ -0,0 +1,15 @@ +# hannah910 + + + +Replacement PCB and plate for TGR 910 keyboard + +* Keyboard Maintainer: [Mechlovin'](https://github.com/mechlovin) +* Hardware Supported: TGR910 CE, TGR910 SE +* Hardware Availability: [Reddit Group Buy](https://www.reddit.com/r/mechmarket/comments/dhwvbn/gb_1015_update_hannah_910_group_buy_tgr_910/) + +Make example for this keyboard (after setting up your build environment): + + make mechlovin/hannah910/rev1:default + +See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). diff --git a/keyboards/mechlovin/hannah910/rev1/rev1.h b/keyboards/mechlovin/hannah910/rev1/rev1.h new file mode 100644 index 0000000000..d2b39dba0c --- /dev/null +++ b/keyboards/mechlovin/hannah910/rev1/rev1.h @@ -0,0 +1,48 @@ +#pragma once + + +#include "quantum.h" + +#define LAYOUT_all( \ + k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k10, k11, k12, k13, k14, \ + k15, k16, k17, k18, k19, k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, \ + k30, k31, k32, k33, k34, k35, k36, k37, k38, k39, k40, k41, k42, k43, k45, \ + k46, k47, k48, k49, k50, k51, k52, k53, k54, k55, k56, k57, k58, k59, k60, \ + k61, k62, k63, k64, k65, k66, k67, k68, k69, k70, k71 \ +) \ +{ \ + { k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k10, k11, k12, k13, k14 }, \ + { k15, k16, k17, k18, k19, k20, k21, k22, k23, k24, k25, k26, k27, k28, k29 }, \ + { k30, k31, k32, k33, k34, k35, k36, k37, k38, k39, k40, k41, k42, k43, k45 }, \ + { k46, k47, k48, k49, k50, k51, k52, k53, k54, k55, k56, k57, k58, k59, k60 }, \ + { k61, k62, k63, KC_NO, k64, KC_NO, k65, KC_NO, k66, KC_NO, k67, k68, k69, k70, k71 }, \ +} +#define LAYOUT_iso( \ + k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k10, k11, k12, k13, k14, \ + k15, k16, k17, k18, k19, k20, k21, k22, k23, k24, k25, k26, k27, k29, \ + k30, k31, k32, k33, k34, k35, k36, k37, k38, k39, k40, k41, k42, k43, k45, \ + k46, k47, k48, k49, k50, k51, k52, k53, k54, k55, k56, k57, k58, k59, k60, \ + k61, k62, k63, k65, k67, k68, k69, k70, k71 \ +) \ +{ \ + { k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k10, k11, k12, k13, k14 }, \ + { k15, k16, k17, k18, k19, k20, k21, k22, k23, k24, k25, k26, k27, KC_NO, k29 }, \ + { k30, k31, k32, k33, k34, k35, k36, k37, k38, k39, k40, k41, k42, k43, k45 }, \ + { k46, k47, k48, k49, k50, k51, k52, k53, k54, k55, k56, k57, k58, k59, k60 }, \ + { k61, k62, k63, KC_NO, KC_NO, KC_NO, k65, KC_NO, KC_NO, KC_NO, k67, k68, k69, k70, k71 }, \ +} + +#define LAYOUT_ansi( \ + k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k10, k11, k12, k13, \ + k15, k16, k17, k18, k19, k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, \ + k30, k31, k32, k33, k34, k35, k36, k37, k38, k39, k40, k41, k43, k45, \ + k46, k48, k49, k50, k51, k52, k53, k54, k55, k56, k57, k58, k59, k60, \ + k61, k62, k63, k65, k67, k68, k69, k70, k71 \ +) \ +{ \ + { k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k10, k11, k12, k13, KC_NO }, \ + { k15, k16, k17, k18, k19, k20, k21, k22, k23, k24, k25, k26, k27, k28, k29 }, \ + { k30, k31, k32, k33, k34, k35, k36, k37, k38, k39, k40, k41, KC_NO, k43, k45 }, \ + { k46, KC_NO, k48, k49, k50, k51, k52, k53, k54, k55, k56, k57, k58, k59, k60 }, \ + { k61, k62, k63, KC_NO, KC_NO, KC_NO, k65, KC_NO, KC_NO, KC_NO, k67, k68, k69, k70, k71 }, \ +} diff --git a/keyboards/mechlovin/hannah910/rev1/rules.mk b/keyboards/mechlovin/hannah910/rev1/rules.mk new file mode 100644 index 0000000000..5e17282eb0 --- /dev/null +++ b/keyboards/mechlovin/hannah910/rev1/rules.mk @@ -0,0 +1,33 @@ +# MCU name +MCU = atmega32u4 + +# Bootloader selection +# Teensy halfkay +# Pro Micro caterina +# Atmel DFU atmel-dfu +# LUFA DFU lufa-dfu +# QMK DFU qmk-dfu +# ATmega32A bootloadHID +# ATmega328P USBasp +BOOTLOADER = atmel-dfu + +# Build Options +# change yes to no to disable +# +BOOTMAGIC_ENABLE = lite # Virtual DIP switch configuration +MOUSEKEY_ENABLE = no # Mouse keys +EXTRAKEY_ENABLE = yes # Audio control and System control +CONSOLE_ENABLE = no # Console for debug +COMMAND_ENABLE = no # Commands for debug and configuration +# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE +SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend +# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work +NKRO_ENABLE = no # USB Nkey Rollover +BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality +RGBLIGHT_ENABLE = yes # Enable keyboard RGB underglow +MIDI_ENABLE = no # MIDI support +UNICODE_ENABLE = no # Unicode +BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID +AUDIO_ENABLE = no # Audio output on port C6 +FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches +HD44780_ENABLE = no # Enable support for HD44780 based LCDs
\ No newline at end of file diff --git a/keyboards/mechlovin/hannah910/rev2/config.h b/keyboards/mechlovin/hannah910/rev2/config.h new file mode 100644 index 0000000000..3ae3cb65bc --- /dev/null +++ b/keyboards/mechlovin/hannah910/rev2/config.h @@ -0,0 +1,6 @@ +#pragma once + +#define PRODUCT_ID 0x9102 +#define DEVICE_VER 0x0002 + +#define RGBLED_NUM 28
\ No newline at end of file diff --git a/keyboards/mechlovin/hannah910/rev2/info.json b/keyboards/mechlovin/hannah910/rev2/info.json new file mode 100644 index 0000000000..df48fbcf32 --- /dev/null +++ b/keyboards/mechlovin/hannah910/rev2/info.json @@ -0,0 +1,87 @@ +{ + "keyboard_name": "Hannah910 Rev.2", + "url": "", + "maintainer": "Team Mechlovin'", + "width": 16, + "height": 5, + "layouts": { + "LAYOUT": { + "key_count": 72, + "layout": [ + {"label":"K00 (B0,B5)", "x":0, "y":0}, + {"label":"K01 (B0,B6)", "x":1, "y":0}, + {"label":"K02 (B0,B7)", "x":2, "y":0}, + {"label":"K03 (B0,C0)", "x":3, "y":0}, + {"label":"K04 (B0,C1)", "x":4, "y":0}, + {"label":"K05 (B0,C2)", "x":5, "y":0}, + {"label":"K06 (B0,C3)", "x":6, "y":0}, + {"label":"K07 (B0,C4)", "x":7, "y":0}, + {"label":"K08 (B0,C5)", "x":8, "y":0}, + {"label":"K09 (B0,C6)", "x":9, "y":0}, + {"label":"K0A (B0,C7)", "x":10, "y":0}, + {"label":"K0B (B0,D0)", "x":11, "y":0}, + {"label":"K0C (B0,D1)", "x":12, "y":0}, + {"label":"K0D (B0,D2)", "x":13, "y":0}, + {"label":"K0E (B0,D3)", "x":14, "y":0}, + {"label":"K49 (B4,C6)", "x":15, "y":0}, + {"label":"K10 (B1,B5)", "x":0, "y":1, "w":1.5}, + {"label":"K11 (B1,B6)", "x":1.5, "y":1}, + {"label":"K12 (B1,B7)", "x":2.5, "y":1}, + {"label":"K13 (B1,C0)", "x":3.5, "y":1}, + {"label":"K14 (B1,C1)", "x":4.5, "y":1}, + {"label":"K15 (B1,C2)", "x":5.5, "y":1}, + {"label":"K16 (B1,C3)", "x":6.5, "y":1}, + {"label":"K17 (B1,C4)", "x":7.5, "y":1}, + {"label":"K18 (B1,C5)", "x":8.5, "y":1}, + {"label":"K19 (B1,C6)", "x":9.5, "y":1}, + {"label":"K1A (B1,C7)", "x":10.5, "y":1}, + {"label":"K1B (B1,D0)", "x":11.5, "y":1}, + {"label":"K1C (B1,D1)", "x":12.5, "y":1}, + {"label":"K1D (B1,D2)", "x":13.5, "y":1, "w":1.5}, + {"label":"K1E (B1,D3)", "x":15, "y":1}, + {"label":"K20 (B2,B5)", "x":0, "y":2, "w":1.75}, + {"label":"K21 (B2,B6)", "x":1.75, "y":2}, + {"label":"K22 (B2,B7)", "x":2.75, "y":2}, + {"label":"K23 (B2,C0)", "x":3.75, "y":2}, + {"label":"K24 (B2,C1)", "x":4.75, "y":2}, + {"label":"K25 (B2,C2)", "x":5.75, "y":2}, + {"label":"K26 (B2,C3)", "x":6.75, "y":2}, + {"label":"K27 (B2,C4)", "x":7.75, "y":2}, + {"label":"K28 (B2,C5)", "x":8.75, "y":2}, + {"label":"K29 (B2,C6)", "x":9.75, "y":2}, + {"label":"K2A (B2,C7)", "x":10.75, "y":2}, + {"label":"K2B (B2,D0)", "x":11.75, "y":2}, + {"label":"K2C (B2,D1)", "x":12.75, "y":2}, + {"label":"K2D (B2,D2)", "x":13.75, "y":2, "w":1.25}, + {"label":"K2E (B2,D3)", "x":15, "y":2}, + {"label":"K30 (B3,B5)", "x":0, "y":3, "w":1.25}, + {"label":"K31 (B3,B6)", "x":1.25, "y":3}, + {"label":"K32 (B3,B7)", "x":2.25, "y":3}, + {"label":"K33 (B3,C0)", "x":3.25, "y":3}, + {"label":"K34 (B3,C1)", "x":4.25, "y":3}, + {"label":"K35 (B3,C2)", "x":5.25, "y":3}, + {"label":"K36 (B3,C3)", "x":6.25, "y":3}, + {"label":"K37 (B3,C4)", "x":7.25, "y":3}, + {"label":"K38 (B3,C5)", "x":8.25, "y":3}, + {"label":"K39 (B3,C6)", "x":9.25, "y":3}, + {"label":"K3A (B3,C7)", "x":10.25, "y":3}, + {"label":"K3B (B3,D0)", "x":11.25, "y":3}, + {"label":"K3C (B3,D1)", "x":12.25, "y":3, "w":1.75}, + {"label":"K3D (B3,D2)", "x":14, "y":3}, + {"label":"K3E (B3,D3)", "x":15, "y":3}, + {"label":"K40 (B4,B5)", "x":0, "y":4, "w":1.25}, + {"label":"K41 (B4,B6)", "x":1.25, "y":4, "w":1.25}, + {"label":"K42 (B4,B7)", "x":2.5, "y":4, "w":1.25}, + {"label":"K44 (B4,C1)", "x":3.75, "y":4, "w":2.75}, + {"label":"K46 (B4,C3)", "x":6.5, "y":4, "w":1.25}, + {"label":"K48 (B4,C5)", "x":7.75, "y":4, "w":2.25}, + {"label":"K4A (B4,C7)", "x":10, "y":4, "w":1.25}, + {"label":"K4B (B4,D0)", "x":11.25, "y":4, "w":1.25}, + {"label":"K4C (B4,D1)", "x":13, "y":4}, + {"label":"K4D (B4,D2)", "x":14, "y":4}, + {"label":"K4E (B4,D3)", "x":15, "y":4} + ] + } + } + ,"meta": "https://noroadsleft.github.io/kbf_qmk_converter/" +} diff --git a/keyboards/mechlovin/hannah910/rev2/keymaps/ansi/keymap.c b/keyboards/mechlovin/hannah910/rev2/keymaps/ansi/keymap.c new file mode 100644 index 0000000000..022f1f3b37 --- /dev/null +++ b/keyboards/mechlovin/hannah910/rev2/keymaps/ansi/keymap.c @@ -0,0 +1,47 @@ +/* Copyright 2019 Mechlovin + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ +#include QMK_KEYBOARD_H + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + [0] = LAYOUT_ansi( /* Base */ + KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_PSCR, + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_INS, + LT(1,KC_CAPS), KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, KC_HOME, + KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_UP, KC_END, + KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_RALT, KC_RCTL, KC_LEFT, KC_DOWN, KC_RGHT + ), + [1] = LAYOUT_ansi( /* Layer2 */ + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS + ), + [2] = LAYOUT_ansi( /* Layer2 */ + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS + ), + [3] = LAYOUT_ansi( /* Layer2 */ + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS + ), +};
\ No newline at end of file diff --git a/keyboards/mechlovin/hannah910/rev2/keymaps/ansi/readme.md b/keyboards/mechlovin/hannah910/rev2/keymaps/ansi/readme.md new file mode 100644 index 0000000000..63604a09e4 --- /dev/null +++ b/keyboards/mechlovin/hannah910/rev2/keymaps/ansi/readme.md @@ -0,0 +1,2 @@ +# The ansi keymap for hannah910v2 +GB PCB rev.2 here: https://www.reddit.com/r/mechmarket/comments/esv0um/gb_team_mechlovin_hannah_910_v2_infinity_ce_jane/
\ No newline at end of file diff --git a/keyboards/mechlovin/hannah910/rev2/keymaps/default/keymap.c b/keyboards/mechlovin/hannah910/rev2/keymaps/default/keymap.c new file mode 100644 index 0000000000..c0f66cebcf --- /dev/null +++ b/keyboards/mechlovin/hannah910/rev2/keymaps/default/keymap.c @@ -0,0 +1,48 @@ +/* Copyright 2019 Mechlovin + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ +#include QMK_KEYBOARD_H + + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + [0] = LAYOUT_all( /* Base */ + KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_DEL, KC_PSCR, + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_INS, + LT(1,KC_CAPS), KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_NUHS, KC_ENT, KC_HOME, + KC_LSFT, KC_NUBS, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_UP, KC_END, + KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_SPC, KC_SPC, KC_RALT, KC_RCTL, KC_LEFT, KC_DOWN, KC_RGHT + ), + [1] = LAYOUT_all( + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS + ), + [2] = LAYOUT_all( + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS + ), + [3] = LAYOUT_all( + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS + ), +};
\ No newline at end of file diff --git a/keyboards/mechlovin/hannah910/rev2/keymaps/default/readme.md b/keyboards/mechlovin/hannah910/rev2/keymaps/default/readme.md new file mode 100644 index 0000000000..63604a09e4 --- /dev/null +++ b/keyboards/mechlovin/hannah910/rev2/keymaps/default/readme.md @@ -0,0 +1,2 @@ +# The ansi keymap for hannah910v2 +GB PCB rev.2 here: https://www.reddit.com/r/mechmarket/comments/esv0um/gb_team_mechlovin_hannah_910_v2_infinity_ce_jane/
\ No newline at end of file diff --git a/keyboards/mechlovin/hannah910/rev2/keymaps/via/keymap.c b/keyboards/mechlovin/hannah910/rev2/keymaps/via/keymap.c new file mode 100644 index 0000000000..9c2a72916d --- /dev/null +++ b/keyboards/mechlovin/hannah910/rev2/keymaps/via/keymap.c @@ -0,0 +1,48 @@ +/* Copyright 2019 Mechlovin + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ +#include QMK_KEYBOARD_H + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + + [0] = LAYOUT_all( /* Base */ + KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_DEL, KC_PSCR, + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_INS, + LT(1,KC_CAPS), KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_NUHS, KC_ENT, KC_HOME, + KC_LSFT, KC_NUBS, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_UP, KC_END, + KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_SPC, KC_SPC, KC_RALT, KC_RCTL, KC_LEFT, KC_DOWN, KC_RGHT + ), + [1] = LAYOUT_all( /* Layer2 */ + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS + ), + [2] = LAYOUT_all( /* Layer2 */ + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS + ), + [3] = LAYOUT_all( /* Layer2 */ + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS + ), +};
\ No newline at end of file diff --git a/keyboards/mechlovin/hannah910/rev2/keymaps/via/readme.md b/keyboards/mechlovin/hannah910/rev2/keymaps/via/readme.md new file mode 100644 index 0000000000..9db84a195e --- /dev/null +++ b/keyboards/mechlovin/hannah910/rev2/keymaps/via/readme.md @@ -0,0 +1,2 @@ +# The default keymap (VIA support) for hannah910v2 +GB PCB rev.2 here: https://www.reddit.com/r/mechmarket/comments/esv0um/gb_team_mechlovin_hannah_910_v2_infinity_ce_jane/
\ No newline at end of file diff --git a/keyboards/mechlovin/hannah910/rev2/keymaps/via/rules.mk b/keyboards/mechlovin/hannah910/rev2/keymaps/via/rules.mk new file mode 100644 index 0000000000..1e5b99807c --- /dev/null +++ b/keyboards/mechlovin/hannah910/rev2/keymaps/via/rules.mk @@ -0,0 +1 @@ +VIA_ENABLE = yes diff --git a/keyboards/mechlovin/hannah910/rev2/readme.md b/keyboards/mechlovin/hannah910/rev2/readme.md new file mode 100644 index 0000000000..6fc4a06f71 --- /dev/null +++ b/keyboards/mechlovin/hannah910/rev2/readme.md @@ -0,0 +1,19 @@ +# hannah910v2 + + + +Replacement PCB and plate for TGR 910 keyboard (maybe fit with dolinger 65) + +* Keyboard Maintainer: [Mechlovin'](https://github.com/mechlovin) +* Hardware Supported: TGR910 CE, TGR910 SE +* Hardware Availability: [Reddit Group Buy](https://www.reddit.com/r/mechmarket/comments/dhwvbn/gb_1015_update_hannah_910_group_buy_tgr_910/) + +Make example for this keyboard (after setting up your build environment): + + make mechlovin/hannah910/rev2:default + +Build firmware for VIA: + + make mechlovin/hannah910/rev2:via + +See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). diff --git a/keyboards/mechlovin/hannah910/rev2/rev2.h b/keyboards/mechlovin/hannah910/rev2/rev2.h new file mode 100644 index 0000000000..d212d1ea3e --- /dev/null +++ b/keyboards/mechlovin/hannah910/rev2/rev2.h @@ -0,0 +1,50 @@ +#pragma once + + +#include "quantum.h" + + +#define LAYOUT_all( \ + k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k10, k11, k12, k13, k14, k67, \ + k15, k16, k17, k18, k19, k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, \ + k30, k31, k32, k33, k34, k35, k36, k37, k38, k39, k40, k41, k42, k43, k45, \ + k46, k47, k48, k49, k50, k51, k52, k53, k54, k55, k56, k57, k58, k59, k60, \ + k61, k62, k63, k64, k65, k66, k68, k69, k70, k71, k72 \ +) \ +{ \ + { k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k10, k11, k12, k13, k14 }, \ + { k15, k16, k17, k18, k19, k20, k21, k22, k23, k24, k25, k26, k27, k28, k29 }, \ + { k30, k31, k32, k33, k34, k35, k36, k37, k38, k39, k40, k41, k42, k43, k45 }, \ + { k46, k47, k48, k49, k50, k51, k52, k53, k54, k55, k56, k57, k58, k59, k60 }, \ + { k61, k62, k63, KC_NO, k64, KC_NO, k65, KC_NO, k66, k67, k68, k69, k70, k71, k72 }, \ +} +#define LAYOUT_iso( \ + k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k10, k11, k12, k13, k14, k66, \ + k15, k16, k17, k18, k19, k20, k21, k22, k23, k24, k25, k26, k27, k29, \ + k30, k31, k32, k33, k34, k35, k36, k37, k38, k39, k40, k41, k42, k43, k45, \ + k46, k47, k48, k49, k50, k51, k52, k53, k54, k55, k56, k57, k58, k59, k60, \ + k61, k62, k63, k65, k67, k68, k69, k70, k71 \ +) \ +{ \ + { k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k10, k11, k12, k13, k14 }, \ + { k15, k16, k17, k18, k19, k20, k21, k22, k23, k24, k25, k26, k27, KC_NO, k29 }, \ + { k30, k31, k32, k33, k34, k35, k36, k37, k38, k39, k40, k41, k42, k43, k45 }, \ + { k46, k47, k48, k49, k50, k51, k52, k53, k54, k55, k56, k57, k58, k59, k60 }, \ + { k61, k62, k63, KC_NO, KC_NO, KC_NO, k65, KC_NO, KC_NO, k66, k67, k68, k69, k70, k71 }, \ +} + +#define LAYOUT_ansi( \ + k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k10, k11, k12, k13, k66, \ + k15, k16, k17, k18, k19, k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, \ + k30, k31, k32, k33, k34, k35, k36, k37, k38, k39, k40, k41, k43, k45, \ + k46, k48, k49, k50, k51, k52, k53, k54, k55, k56, k57, k58, k59, k60, \ + k61, k62, k63, k65, k67, k68, k69, k70, k71 \ +) \ +{ \ + { k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k10, k11, k12, k13, KC_NO }, \ + { k15, k16, k17, k18, k19, k20, k21, k22, k23, k24, k25, k26, k27, k28, k29 }, \ + { k30, k31, k32, k33, k34, k35, k36, k37, k38, k39, k40, k41, KC_NO, k43, k45 }, \ + { k46, KC_NO, k48, k49, k50, k51, k52, k53, k54, k55, k56, k57, k58, k59, k60 }, \ + { k61, k62, k63, KC_NO, KC_NO, KC_NO, k65, KC_NO, KC_NO, k66, k67, k68, k69, k70, k71 }, \ +} + diff --git a/keyboards/mechlovin/hannah910/rev2/rules.mk b/keyboards/mechlovin/hannah910/rev2/rules.mk new file mode 100644 index 0000000000..e8100a0f42 --- /dev/null +++ b/keyboards/mechlovin/hannah910/rev2/rules.mk @@ -0,0 +1,33 @@ +# MCU name +MCU = atmega32u4 + +# Bootloader selection +# Teensy halfkay +# Pro Micro caterina +# Atmel DFU atmel-dfu +# LUFA DFU lufa-dfu +# QMK DFU qmk-dfu +# ATmega32A bootloadHID +# ATmega328P USBasp +BOOTLOADER = atmel-dfu + +# Build Options +# change yes to no to disable +# +BOOTMAGIC_ENABLE = lite # Virtual DIP switch configuration +MOUSEKEY_ENABLE = no # Mouse keys +EXTRAKEY_ENABLE = yes # Audio control and System control +CONSOLE_ENABLE = no # Console for debug +COMMAND_ENABLE = no # Commands for debug and configuration +# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE +SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend +# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work +NKRO_ENABLE = no # USB Nkey Rollover +BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality +RGBLIGHT_ENABLE = yes # Enable keyboard RGB underglow +MIDI_ENABLE = no # MIDI support +UNICODE_ENABLE = no # Unicode +BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID +AUDIO_ENABLE = no # Audio output on port C6 +FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches +HD44780_ENABLE = no # Enable support for HD44780 based LCDs
\ No newline at end of file diff --git a/keyboards/mechlovin/hannah910/rules.mk b/keyboards/mechlovin/hannah910/rules.mk index 5e17282eb0..a356867197 100644 --- a/keyboards/mechlovin/hannah910/rules.mk +++ b/keyboards/mechlovin/hannah910/rules.mk @@ -1,33 +1 @@ -# MCU name -MCU = atmega32u4 - -# Bootloader selection -# Teensy halfkay -# Pro Micro caterina -# Atmel DFU atmel-dfu -# LUFA DFU lufa-dfu -# QMK DFU qmk-dfu -# ATmega32A bootloadHID -# ATmega328P USBasp -BOOTLOADER = atmel-dfu - -# Build Options -# change yes to no to disable -# -BOOTMAGIC_ENABLE = lite # Virtual DIP switch configuration -MOUSEKEY_ENABLE = no # Mouse keys -EXTRAKEY_ENABLE = yes # Audio control and System control -CONSOLE_ENABLE = no # Console for debug -COMMAND_ENABLE = no # Commands for debug and configuration -# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE -SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend -# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work -NKRO_ENABLE = no # USB Nkey Rollover -BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality -RGBLIGHT_ENABLE = yes # Enable keyboard RGB underglow -MIDI_ENABLE = no # MIDI support -UNICODE_ENABLE = no # Unicode -BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID -AUDIO_ENABLE = no # Audio output on port C6 -FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches -HD44780_ENABLE = no # Enable support for HD44780 based LCDs
\ No newline at end of file +DEFAULT_FOLDER = mechlovin/hannah910/rev1 |