diff options
| -rw-r--r-- | keyboards/kbdfans/kbd75/readme.md | 10 | ||||
| -rw-r--r-- | keyboards/winkeyless/bmini/readme.md | 8 | ||||
| -rw-r--r-- | keyboards/winkeyless/readme.md | 12 |
3 files changed, 21 insertions, 9 deletions
diff --git a/keyboards/kbdfans/kbd75/readme.md b/keyboards/kbdfans/kbd75/readme.md index 89fe274161..09f06a6ad5 100644 --- a/keyboards/kbdfans/kbd75/readme.md +++ b/keyboards/kbdfans/kbd75/readme.md @@ -4,10 +4,12 @@ Keyboard Maintainer: QMK Community Hardware Supported: KBD75 PCB rev 1 and 2 Hardware Availability: https://kbdfans.myshopify.com/products/kbd75-keyboard-set?variant=35638534029 -The KBD75 has two revisions. Revision 2 has a USB C port and allows a numpad layout. `.hex` files made -for KBD75 revision 1, will still work for revision 2. `.hex` files made for revision 2 (excluding the numpad) -will also still work on revision 1. Both revisions share the same switch matrix but have switch holes in -different areas. +The KBD75 was sold through various rounds, with various PCB changes between them. + +* **Round 1 (2017)**: Black PCB - Bootmapper Client, atmega32a MCU (Use [Winkeyless.kr B.mini](../../winkeyless/bmini/) firmware) +* **Round 2 (2018)**: White PCB - Bootmapper Client, atmega32a MCU (Use [Winkeyless.kr B.mini](../../winkeyless/bmini/) firmware) +* **Round 3-5 (2018)**: White PCB - QMK Firmware, atmega32u4 MCU (Use KBD75 rev1 or rev2(without numpad support)) +* **Round 6 (2019)**: White PCB with USB C - QMK Firmware, atmega32u4 MCU (Use KBD75 rev1 or rev2(with numpad support)) Make example for this keyboard (after setting up your build environment): diff --git a/keyboards/winkeyless/bmini/readme.md b/keyboards/winkeyless/bmini/readme.md index b8cc854950..0512ed7bea 100644 --- a/keyboards/winkeyless/bmini/readme.md +++ b/keyboards/winkeyless/bmini/readme.md @@ -1,6 +1,8 @@ # B.mini -A 75% keyboard with RGB +A 75% keyboard with RGB underglow. + +QMK Firmware is not the official firmware for the B.mini. * Keyboard Maintainer: QMK Community * Hardware Supported: B.mini PCB @@ -14,6 +16,8 @@ Flashing example for this keyboard ([after setting up the bootloadHID flashing e make winkeyless/bmini:default:flash -**Reset Key**: Hold down the key located at *LOCATION*, commonly programmed as *KEY* while plugging in the keyboard. +This firmware can be flashed onto the KBDFans KBD75 Round 1 and Round 2 Bootmapper Client boards sold during the 2017 and early 2018 timeframe. + +**Reset Key**: Hold down the bottom left most key located at `K00`, commonly programmed as Left Control while plugging in the keyboard. See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). diff --git a/keyboards/winkeyless/readme.md b/keyboards/winkeyless/readme.md index e6cb45fc47..91719f6da0 100644 --- a/keyboards/winkeyless/readme.md +++ b/keyboards/winkeyless/readme.md @@ -1,7 +1,13 @@ # Winkeyless -[Winkeyless](https://www.winkeyless.kr) is a Korean keyboard company popular for creating the Boot Mapper Client (BMC) firmware. Most Winkeyless boards were low profile and constructed out of acrylic showcasing their RGB underglow capabilities. +[Winkeyless](https://www.winkeyless.kr) is a Korean keyboard company popular for creating the Boot Mapper Client (BMC) firmware. -In late 2018, Winkeyless closed its doors due to the numerous unlicensed implementations of its hardware and software. +Winkeyless used an atmega32a MCU, mini USB B, and utilized the same MCU pins across all their PCBs. Their reset button was always +tied to pins `A0` and `B0` on the atmega32a MCU. -This directory contains official Winkeyless boards that have had QMK ported to work with them. +Most Winkeyless boards were low profile and constructed out of acrylic showcasing their RGB underglow capabilities. + +In late 2018, Winkeyless closed its doors. The numerous unlicensed implementations of its hardware and software were cited as one +of many reasons for shutting down. + +This directory contains official Winkeyless boards that have had QMK firmware ported to work with them. |