summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
-rw-r--r--keyboards/evyd13/wasdat/config.h86
-rw-r--r--keyboards/evyd13/wasdat/info.json29
-rw-r--r--keyboards/evyd13/wasdat/rules.mk22
3 files changed, 30 insertions, 107 deletions
diff --git a/keyboards/evyd13/wasdat/config.h b/keyboards/evyd13/wasdat/config.h
index e151496aed..821cc26b65 100644
--- a/keyboards/evyd13/wasdat/config.h
+++ b/keyboards/evyd13/wasdat/config.h
@@ -19,13 +19,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
#include "config_common.h"
-/* USB Device descriptor parameter */
-#define VENDOR_ID 0x4705
-#define PRODUCT_ID 0xC474
-#define DEVICE_VER 0x0001
-#define MANUFACTURER Evyd13
-#define PRODUCT Wasdat
-
/* key matrix size */
#define MATRIX_ROWS 8
#define MATRIX_COLS 16
@@ -46,87 +39,8 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
#define SN74X138_ADDRESS_PINS { D2, D1, D0 }
-// For QMK DFU
-#define QMK_ESC_OUTPUT D6
-#define QMK_ESC_INPUT D7
-#define QMK_LED B0
-
-#define LED_NUM_LOCK_PIN B2
-#define LED_CAPS_LOCK_PIN B0
-#define LED_SCROLL_LOCK_PIN B1
#define LED_PIN_ON_STATE 0
-// #define BACKLIGHT_PIN B7
-// #define BACKLIGHT_BREATHING
-// #define BACKLIGHT_LEVELS 3
-
-// #define RGB_DI_PIN E2
-// #ifdef RGB_DI_PIN
-// #define RGBLED_NUM 16
-// #define RGBLIGHT_HUE_STEP 8
-// #define RGBLIGHT_SAT_STEP 8
-// #define RGBLIGHT_VAL_STEP 8
-// #define RGBLIGHT_LIMIT_VAL 255 /* The maximum brightness level */
-// #define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */
-// /*== all animations enable ==*/
-// #define RGBLIGHT_ANIMATIONS
-// /*== or choose animations ==*/
-// #define RGBLIGHT_EFFECT_BREATHING
-// #define RGBLIGHT_EFFECT_RAINBOW_MOOD
-// #define RGBLIGHT_EFFECT_RAINBOW_SWIRL
-// #define RGBLIGHT_EFFECT_SNAKE
-// #define RGBLIGHT_EFFECT_KNIGHT
-// #define RGBLIGHT_EFFECT_CHRISTMAS
-// #define RGBLIGHT_EFFECT_STATIC_GRADIENT
-// #define RGBLIGHT_EFFECT_RGB_TEST
-// #define RGBLIGHT_EFFECT_ALTERNATING
-// /*== customize breathing effect ==*/
-// /*==== (DEFAULT) use fixed table instead of exp() and sin() ====*/
-// #define RGBLIGHT_BREATHE_TABLE_SIZE 256 // 256(default) or 128 or 64
-// /*==== use exp() and sin() ====*/
-// #define RGBLIGHT_EFFECT_BREATHE_CENTER 1.85 // 1 to 2.7
-// #define RGBLIGHT_EFFECT_BREATHE_MAX 255 // 0 to 255
-// #endif
-
-/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
-#define DEBOUNCE 5
-
-/* define if matrix has ghost (lacks anti-ghosting diodes) */
-//#define MATRIX_HAS_GHOST
-
-/* number of backlight levels */
-
-/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
-#define LOCKING_SUPPORT_ENABLE
-/* Locking resynchronize hack */
-#define LOCKING_RESYNC_ENABLE
-
-/* If defined, GRAVE_ESC will always act as ESC when CTRL is held.
- * This is userful for the Windows task manager shortcut (ctrl+shift+esc).
- */
-// #define GRAVE_ESC_CTRL_OVERRIDE
-
-/*
- * Force NKRO
- *
- * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
- * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
- * makefile for this to work.)
- *
- * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
- * until the next keyboard reset.
- *
- * NKRO may prevent your keystrokes from being detected in the BIOS, but it is
- * fully operational during normal computer usage.
- *
- * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
- * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
- * bootmagic, NKRO mode will always be enabled until it is toggled again during a
- * power-up.
- *
- */
-//#define FORCE_NKRO
-
/*
* Feature disable options
* These options are also useful to firmware size reduction.
diff --git a/keyboards/evyd13/wasdat/info.json b/keyboards/evyd13/wasdat/info.json
index 23e59c6b33..32a25d96d2 100644
--- a/keyboards/evyd13/wasdat/info.json
+++ b/keyboards/evyd13/wasdat/info.json
@@ -1,7 +1,36 @@
{
"keyboard_name": "Wasdat",
+ "manufacturer": "Evyd13",
"url": "https://maartenwut.com/product/wasdat/",
"maintainer": "evyd13",
+ "processor": "atmega32u4",
+ "bootloader": "qmk-dfu",
+ "usb": {
+ "vid": "0x4705",
+ "pid": "0xC474",
+ "device_version": "0.0.1",
+ },
+ "qmk_lufa_bootloader": {
+ "esc_output": "D6",
+ "esc_input": "D7",
+ "led": "B0"
+ },
+ "features": {
+ "bootmagic": true,
+ "extrakey": true,
+ "nkro": true,
+ },
+ "indicators": {
+ "num_lock": "B2",
+ "caps_lock": "B0",
+ "scroll_lock": "B1"
+ },
+ "community_layouts": [
+ "fullsize_ansi",
+ "fullsize_iso",
+ "tkl_ansi",
+ "tkl_iso"
+ ],
"layouts": {
"LAYOUT_fullsize_ansi": {
"layout": [
diff --git a/keyboards/evyd13/wasdat/rules.mk b/keyboards/evyd13/wasdat/rules.mk
index bb4261a4fe..64eebdfac4 100644
--- a/keyboards/evyd13/wasdat/rules.mk
+++ b/keyboards/evyd13/wasdat/rules.mk
@@ -1,24 +1,4 @@
-# MCU name
-MCU = atmega32u4
-
-# Bootloader selection
-BOOTLOADER = qmk-dfu
-
-# Build Options
-# change yes to no to disable
-#
-BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite
-MOUSEKEY_ENABLE = no # Mouse keys
-EXTRAKEY_ENABLE = yes # Audio control and System control
-CONSOLE_ENABLE = no # Console for debug
-COMMAND_ENABLE = no # Commands for debug and configuration
-NKRO_ENABLE = yes # Enable N-Key Rollover
-BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality
-RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow
-AUDIO_ENABLE = no # Audio output
-
CUSTOM_MATRIX = lite
+
VPATH += drivers/gpio
SRC += matrix.c sn74x138.c
-
-LAYOUTS = fullsize_ansi fullsize_iso tkl_ansi tkl_iso