summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
-rw-r--r--keyboards/gray_studio/cod67/rules.mk2
-rw-r--r--keyboards/standaside/rules.mk2
-rw-r--r--keyboards/tada68/keymaps/default/rules.mk18
-rwxr-xr-xkeyboards/tada68/rules.mk59
-rw-r--r--keyboards/tanuki/rules.mk56
-rw-r--r--keyboards/telophase/rules.mk63
-rwxr-xr-xkeyboards/tetris/rules.mk50
-rw-r--r--keyboards/tgr/jane/keymaps/default/rules.mk0
-rw-r--r--keyboards/the_ruler/keymaps/default/rules.mk0
-rw-r--r--keyboards/the_ruler/rules.mk17
-rw-r--r--keyboards/thevankeyboards/bananasplit/keymaps/default/rules.mk34
-rw-r--r--keyboards/thevankeyboards/bananasplit/rules.mk55
-rw-r--r--keyboards/thevankeyboards/caravan/rules.mk15
-rw-r--r--keyboards/thevankeyboards/minivan/keymaps/default/rules.mk18
-rw-r--r--keyboards/thevankeyboards/minivan/rules.mk56
-rw-r--r--keyboards/thevankeyboards/roadkit/keymaps/default/rules.mk18
-rw-r--r--keyboards/thevankeyboards/roadkit/rules.mk56
-rw-r--r--keyboards/tmo50/rules.mk43
-rw-r--r--keyboards/toad/rules.mk50
-rw-r--r--keyboards/tokyo60/rules.mk57
-rw-r--r--keyboards/touchpad/rules.mk51
-rw-r--r--keyboards/treadstone32/keymaps/default/rules.mk6
-rw-r--r--keyboards/treadstone32/rules.mk39
-rw-r--r--keyboards/treadstone48/keymaps/default/rules.mk18
-rw-r--r--keyboards/treadstone48/rules.mk55
-rw-r--r--keyboards/treasure/type9/rules.mk51
-rw-r--r--keyboards/uzu42/rev1/rules.mk21
-rw-r--r--keyboards/uzu42/rules.mk11
-rw-r--r--keyboards/v60_type_r/keymaps/default/rules.mk2
-rw-r--r--keyboards/v60_type_r/keymaps/iso/rules.mk2
-rw-r--r--keyboards/v60_type_r/rules.mk41
-rw-r--r--keyboards/vision_division/keymaps/default/rules.mk19
-rw-r--r--keyboards/vitamins_included/keymaps/default/rules.mk1
-rw-r--r--keyboards/vitamins_included/rev1/rules.mk11
-rw-r--r--keyboards/vitamins_included/rev2/rules.mk11
-rw-r--r--keyboards/vitamins_included/rules.mk2
-rw-r--r--keyboards/vn66/rules.mk15
-rw-r--r--keyboards/waldo/keymaps/default/rules.mk0
-rw-r--r--keyboards/waldo/keymaps/default_split_shft_bck/rules.mk0
-rw-r--r--keyboards/waldo/rules.mk15
-rw-r--r--keyboards/westfoxtrot/aanzee/rules.mk39
-rw-r--r--keyboards/westfoxtrot/cyclops/rules.mk53
-rw-r--r--keyboards/westfoxtrot/cypher/rules.mk51
-rw-r--r--keyboards/wilba_tech/rama_works_koyu/rules.mk14
-rw-r--r--keyboards/wilba_tech/rama_works_m10_b/rules.mk7
-rw-r--r--keyboards/wilba_tech/rama_works_m60_a/rules.mk16
-rw-r--r--keyboards/wilba_tech/rama_works_m6_a/rules.mk6
-rw-r--r--keyboards/wilba_tech/rama_works_m6_b/rules.mk14
-rw-r--r--keyboards/wilba_tech/rama_works_u80_a/rules.mk15
-rw-r--r--keyboards/wilba_tech/wt60_a/keymaps/via/rules.mk2
-rw-r--r--keyboards/wilba_tech/wt60_a/rules.mk61
-rw-r--r--keyboards/wilba_tech/wt60_d/keymaps/via/rules.mk2
-rw-r--r--keyboards/wilba_tech/wt60_d/rules.mk8
-rw-r--r--keyboards/wilba_tech/wt65_a/keymaps/via/rules.mk2
-rw-r--r--keyboards/wilba_tech/wt65_a/rules.mk15
-rw-r--r--keyboards/wilba_tech/wt65_b/keymaps/via/rules.mk2
-rw-r--r--keyboards/wilba_tech/wt65_b/rules.mk15
-rw-r--r--keyboards/wilba_tech/wt69_a/keymaps/via/rules.mk2
-rw-r--r--keyboards/wilba_tech/wt69_a/rules.mk7
-rw-r--r--keyboards/wilba_tech/wt75_a/keymaps/via/rules.mk2
-rw-r--r--keyboards/wilba_tech/wt75_a/rules.mk15
-rw-r--r--keyboards/wilba_tech/wt75_b/keymaps/via/rules.mk2
-rw-r--r--keyboards/wilba_tech/wt75_b/rules.mk15
-rw-r--r--keyboards/wilba_tech/wt75_c/keymaps/via/rules.mk2
-rw-r--r--keyboards/wilba_tech/wt75_c/rules.mk15
-rw-r--r--keyboards/wilba_tech/wt80_a/keymaps/via/rules.mk2
-rw-r--r--keyboards/wilba_tech/wt80_a/rules.mk15
-rw-r--r--keyboards/wilba_tech/wt8_a/rules.mk6
-rw-r--r--keyboards/wilba_tech/zeal60/rules.mk14
-rw-r--r--keyboards/wilba_tech/zeal65/rules.mk14
-rw-r--r--keyboards/xd60/rev2/rules.mk55
-rw-r--r--keyboards/xd60/rev3/rules.mk53
-rw-r--r--keyboards/xd75/keymaps/default/rules.mk15
-rw-r--r--keyboards/xd75/rules.mk53
-rw-r--r--keyboards/xd84/rules.mk51
-rwxr-xr-xkeyboards/xd87/keymaps/default_underglow/rules.mk2
-rw-r--r--keyboards/xd87/rules.mk51
-rw-r--r--keyboards/xd96/rules.mk51
-rw-r--r--keyboards/xmmx/rules.mk50
-rw-r--r--keyboards/xw60/rules.mk38
-rw-r--r--keyboards/yd60mq/rules.mk39
-rw-r--r--keyboards/yd68/rules.mk51
-rw-r--r--keyboards/yosino58/keymaps/default/rules.mk22
-rw-r--r--keyboards/yosino58/rules.mk58
-rw-r--r--keyboards/zinc/keymaps/default/rules.mk1
-rw-r--r--keyboards/zinc/rules.mk53
-rw-r--r--keyboards/zj68/rules.mk38
-rwxr-xr-xkeyboards/zlant/rules.mk48
88 files changed, 394 insertions, 1808 deletions
diff --git a/keyboards/gray_studio/cod67/rules.mk b/keyboards/gray_studio/cod67/rules.mk
index 1df4615eb9..196dfb8c48 100644
--- a/keyboards/gray_studio/cod67/rules.mk
+++ b/keyboards/gray_studio/cod67/rules.mk
@@ -9,7 +9,7 @@ MCU = atmega32u4
# QMK DFU qmk-dfu
# ATmega32A bootloadHID
# ATmega328P USBasp
-BOOTLOADER = lufa-ms
+BOOTLOADER = atmel-dfu # actually lufa-ms
# Build Options
# change yes to no to disable
diff --git a/keyboards/standaside/rules.mk b/keyboards/standaside/rules.mk
index 993f0acdc0..1d92c731c3 100644
--- a/keyboards/standaside/rules.mk
+++ b/keyboards/standaside/rules.mk
@@ -9,7 +9,7 @@ MCU = atmega32u4
# QMK DFU qmk-dfu
# ATmega32A bootloadHID
# ATmega328P USBasp
-BOOTLOADER = atmel_dfu
+BOOTLOADER = atmel-dfu
# Build Options
# change yes to no to disable
diff --git a/keyboards/tada68/keymaps/default/rules.mk b/keyboards/tada68/keymaps/default/rules.mk
deleted file mode 100644
index 53644093d6..0000000000
--- a/keyboards/tada68/keymaps/default/rules.mk
+++ /dev/null
@@ -1,18 +0,0 @@
-# Build Options
-# change to "no" to disable the options, or define them in the Makefile in
-# the appropriate keymap folder that will get included automatically
-#
-BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration(+1000)
-MOUSEKEY_ENABLE = yes # Mouse keys(+4700)
-EXTRAKEY_ENABLE = yes # Audio control and System control(+450)
-CONSOLE_ENABLE = no # Console for debug(+400)
-COMMAND_ENABLE = yes # Commands for debug and configuration
-NKRO_ENABLE = yes # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
-BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality
-MIDI_ENABLE = no # MIDI controls
-AUDIO_ENABLE = no # Audio output on port C6
-UNICODE_ENABLE = no # Unicode
-BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID
-RGBLIGHT_ENABLE = no # Enable WS2812 RGB underlight.
-SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend
-
diff --git a/keyboards/tada68/rules.mk b/keyboards/tada68/rules.mk
index ceb6f96af7..ec3991c318 100755
--- a/keyboards/tada68/rules.mk
+++ b/keyboards/tada68/rules.mk
@@ -1,61 +1,26 @@
# MCU name
MCU = atmega32u4
-# Processor frequency.
-# This will define a symbol, F_CPU, in all source code files equal to the
-# processor frequency in Hz. You can then use this symbol in your source code to
-# calculate timings. Do NOT tack on a 'UL' at the end, this will be done
-# automatically to create a 32-bit value in your source code.
-#
-# This will be an integer division of F_USB below, as it is sourced by
-# F_USB after it has run through any CPU prescalers. Note that this value
-# does not *change* the processor frequency - it should merely be updated to
-# reflect the processor speed set externally so that the code can use accurate
-# software delays.
-F_CPU = 16000000
-
-
-#
-# LUFA specific
-#
-# Target architecture (see library "Board Types" documentation).
-ARCH = AVR8
-
-# Input clock frequency.
-# This will define a symbol, F_USB, in all source code files equal to the
-# input clock frequency (before any prescaling is performed) in Hz. This value may
-# differ from F_CPU if prescaling is used on the latter, and is required as the
-# raw input clock is fed directly to the PLL sections of the AVR for high speed
-# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
-# at the end, this will be done automatically to create a 32-bit value in your
-# source code.
-#
-# If no clock division is performed on the input clock inside the AVR (via the
-# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
-F_USB = $(F_CPU)
-
-# Interrupt driven control endpoint task(+60)
-OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
-
-
-# Boot Section Size in *bytes*
-# Teensy halfKay 512
-# Teensy++ halfKay 1024
-# Atmel DFU loader 4096
-# LUFA bootloader 4096
-# USBaspLoader 2048
-OPT_DEFS += -DBOOTLOADER_SIZE=4096
+# Bootloader selection
+# Teensy halfkay
+# Pro Micro caterina
+# Atmel DFU atmel-dfu
+# LUFA DFU lufa-dfu
+# QMK DFU qmk-dfu
+# ATmega32A bootloadHID
+# ATmega328P USBasp
+BOOTLOADER = atmel-dfu # actually lufa-ms
# Mass storage bootloader on the tada68 uses bin files
-FIRMWARE_FORMAT=bin
+FIRMWARE_FORMAT = bin
# Build Options
# comment out to disable the options.
#
BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration(+1000)
-MOUSEKEY_ENABLE = no # Mouse keys(+4700)
+MOUSEKEY_ENABLE = yes # Mouse keys(+4700)
EXTRAKEY_ENABLE = yes # Audio control and System control(+450)
-CONSOLE_ENABLE = yes # Console for debug(+400)
+CONSOLE_ENABLE = no # Console for debug(+400)
COMMAND_ENABLE = yes # Commands for debug and configuration
NKRO_ENABLE = yes # USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
RGBLIGHT_ENABLE = no # Enable keyboard underlight functionality (+4870)
diff --git a/keyboards/tanuki/rules.mk b/keyboards/tanuki/rules.mk
index fd3c058304..516c3db5e6 100644
--- a/keyboards/tanuki/rules.mk
+++ b/keyboards/tanuki/rules.mk
@@ -1,52 +1,15 @@
-
-
# MCU name
MCU = atmega32u4
-# Processor frequency.
-# This will define a symbol, F_CPU, in all source code files equal to the
-# processor frequency in Hz. You can then use this symbol in your source code to
-# calculate timings. Do NOT tack on a 'UL' at the end, this will be done
-# automatically to create a 32-bit value in your source code.
-#
-# This will be an integer division of F_USB below, as it is sourced by
-# F_USB after it has run through any CPU prescalers. Note that this value
-# does not *change* the processor frequency - it should merely be updated to
-# reflect the processor speed set externally so that the code can use accurate
-# software delays.
-F_CPU = 16000000
-
-
-#
-# LUFA specific
-#
-# Target architecture (see library "Board Types" documentation).
-ARCH = AVR8
-
-# Input clock frequency.
-# This will define a symbol, F_USB, in all source code files equal to the
-# input clock frequency (before any prescaling is performed) in Hz. This value may
-# differ from F_CPU if prescaling is used on the latter, and is required as the
-# raw input clock is fed directly to the PLL sections of the AVR for high speed
-# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
-# at the end, this will be done automatically to create a 32-bit value in your
-# source code.
-#
-# If no clock division is performed on the input clock inside the AVR (via the
-# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
-F_USB = $(F_CPU)
-
-# Interrupt driven control endpoint task(+60)
-OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
-
-
-# Boot Section Size in *bytes*
-# Teensy halfKay 512
-# Teensy++ halfKay 1024
-# Atmel DFU loader 4096
-# LUFA bootloader 4096
-# USBaspLoader 2048
-BOOTLOADER=caterina
+# Bootloader selection
+# Teensy halfkay
+# Pro Micro caterina
+# Atmel DFU atmel-dfu
+# LUFA DFU lufa-dfu
+# QMK DFU qmk-dfu
+# ATmega32A bootloadHID
+# ATmega328P USBasp
+BOOTLOADER = caterina
# Build Options
# comment out to disable the options.
@@ -64,4 +27,3 @@ AUDIO_ENABLE = no
UNICODE_ENABLE = no # Unicode
BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID
TAP_DANCE_ENABLE = no
-
diff --git a/keyboards/telophase/rules.mk b/keyboards/telophase/rules.mk
index 3af91858f2..2c8df3295d 100644
--- a/keyboards/telophase/rules.mk
+++ b/keyboards/telophase/rules.mk
@@ -1,56 +1,16 @@
-
-OPT_DEFS += -DMITOSIS_PROMICRO
-MITOSIS_UPLOAD_COMMAND = while [ ! -r $(USB) ]; do sleep 1; done; \
- avrdude -p $(MCU) -c avr109 -U flash:w:$(TARGET).hex -P $(USB)
-
-# # project specific files
-SRC = matrix.c
-
-
# MCU name
MCU = atmega32u4
-# Processor frequency.
-# This will define a symbol, F_CPU, in all source code files equal to the
-# processor frequency in Hz. You can then use this symbol in your source code to
-# calculate timings. Do NOT tack on a 'UL' at the end, this will be done
-# automatically to create a 32-bit value in your source code.
-#
-# This will be an integer division of F_USB below, as it is sourced by
-# F_USB after it has run through any CPU prescalers. Note that this value
-# does not *change* the processor frequency - it should merely be updated to
-# reflect the processor speed set externally so that the code can use accurate
-# software delays.
-F_CPU = 16000000
-
-#
-# LUFA specific
-#
-# Target architecture (see library "Board Types" documentation).
-ARCH = AVR8
-
-# Input clock frequency.
-# This will define a symbol, F_USB, in all source code files equal to the
-# input clock frequency (before any prescaling is performed) in Hz. This value may
-# differ from F_CPU if prescaling is used on the latter, and is required as the
-# raw input clock is fed directly to the PLL sections of the AVR for high speed
-# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
-# at the end, this will be done automatically to create a 32-bit value in your
-# source code.
-#
-# If no clock division is performed on the input clock inside the AVR (via the
-# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
-F_USB = $(F_CPU)
-
-# Bootloader
-# This definition is optional, and if your keyboard supports multiple bootloaders of
-# different sizes, comment this out, and the correct address will be loaded
-# automatically (+60). See bootloader.mk for all options.
+# Bootloader selection
+# Teensy halfkay
+# Pro Micro caterina
+# Atmel DFU atmel-dfu
+# LUFA DFU lufa-dfu
+# QMK DFU qmk-dfu
+# ATmega32A bootloadHID
+# ATmega328P USBasp
BOOTLOADER = caterina
-# Interrupt driven control endpoint task(+60)
-OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
-
# Build Options
# comment out to disable the options.
#
@@ -72,3 +32,10 @@ USB = /dev/ttyACM0
# upload: build
# $(MITOSIS_UPLOAD_COMMAND)
+
+OPT_DEFS += -DMITOSIS_PROMICRO
+MITOSIS_UPLOAD_COMMAND = while [ ! -r $(USB) ]; do sleep 1; done; \
+ avrdude -p $(MCU) -c avr109 -U flash:w:$(TARGET).hex -P $(USB)
+
+# # project specific files
+SRC = matrix.c
diff --git a/keyboards/tetris/rules.mk b/keyboards/tetris/rules.mk
index c3e641c8f2..15fcf5cf6d 100755
--- a/keyboards/tetris/rules.mk
+++ b/keyboards/tetris/rules.mk
@@ -1,47 +1,15 @@
# MCU name
MCU = atmega32u4
-# Processor frequency.
-# This will define a symbol, F_CPU, in all source code files equal to the
-# processor frequency in Hz. You can then use this symbol in your source code to
-# calculate timings. Do NOT tack on a 'UL' at the end, this will be done
-# automatically to create a 32-bit value in your source code.
-#
-# This will be an integer division of F_USB below, as it is sourced by
-# F_USB after it has run through any CPU prescalers. Note that this value
-# does not *change* the processor frequency - it should merely be updated to
-# reflect the processor speed set externally so that the code can use accurate
-# software delays.
-F_CPU = 16000000
-
-#
-# LUFA specific
-#
-# Target architecture (see library "Board Types" documentation).
-ARCH = AVR8
-
-# Input clock frequency.
-# This will define a symbol, F_USB, in all source code files equal to the
-# input clock frequency (before any prescaling is performed) in Hz. This value may
-# differ from F_CPU if prescaling is used on the latter, and is required as the
-# raw input clock is fed directly to the PLL sections of the AVR for high speed
-# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
-# at the end, this will be done automatically to create a 32-bit value in your
-# source code.
-#
-# If no clock division is performed on the input clock inside the AVR (via the
-# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
-F_USB = $(F_CPU)
-
-# Interrupt driven control endpoint task(+60)
-OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
-
-
-# Boot Section Size in *bytes*
-#OPT_DEFS += -DBOOTLOADER_SIZE=4096
-
-BOOTLOADER =qmk-dfu
-
+# Bootloader selection
+# Teensy halfkay
+# Pro Micro caterina
+# Atmel DFU atmel-dfu
+# LUFA DFU lufa-dfu
+# QMK DFU qmk-dfu
+# ATmega32A bootloadHID
+# ATmega328P USBasp
+BOOTLOADER = qmk-dfu
# Build Options
# comment out to disable the options.
diff --git a/keyboards/tgr/jane/keymaps/default/rules.mk b/keyboards/tgr/jane/keymaps/default/rules.mk
deleted file mode 100644
index e69de29bb2..0000000000
--- a/keyboards/tgr/jane/keymaps/default/rules.mk
+++ /dev/null
diff --git a/keyboards/the_ruler/keymaps/default/rules.mk b/keyboards/the_ruler/keymaps/default/rules.mk
deleted file mode 100644
index e69de29bb2..0000000000
--- a/keyboards/the_ruler/keymaps/default/rules.mk
+++ /dev/null
diff --git a/keyboards/the_ruler/rules.mk b/keyboards/the_ruler/rules.mk
index 33611c44bb..bfcc092615 100644
--- a/keyboards/the_ruler/rules.mk
+++ b/keyboards/the_ruler/rules.mk
@@ -1,14 +1,15 @@
# MCU name
MCU = atmega32u4
-# Boot Section Size in *bytes*
-# Teensy halfKay 512
-# Teensy++ halfKay 1024
-# Atmel DFU loader 4096
-# LUFA bootloader 4096
-# USBaspLoader 2048
-OPT_DEFS += -DBOOTLOADER_SIZE=4096
-
+# Bootloader selection
+# Teensy halfkay
+# Pro Micro caterina
+# Atmel DFU atmel-dfu
+# LUFA DFU lufa-dfu
+# QMK DFU qmk-dfu
+# ATmega32A bootloadHID
+# ATmega328P USBasp
+BOOTLOADER = atmel-dfu
# Build Options
# change yes to no to disable
diff --git a/keyboards/thevankeyboards/bananasplit/keymaps/default/rules.mk b/keyboards/thevankeyboards/bananasplit/keymaps/default/rules.mk
deleted file mode 100644
index 9da4bf91a5..0000000000
--- a/keyboards/thevankeyboards/bananasplit/keymaps/default/rules.mk
+++ /dev/null
@@ -1,34 +0,0 @@
-# Copyright 2017 Balz Guenat
-#
-# This program is free software: you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation, either version 2 of the License, or
-# (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program. If not, see <http://www.gnu.org/licenses/>.
-
-
-# QMK Build Options
-# change to "no" to disable the options, or define them in the Makefile in
-# the appropriate keymap folder that will get included automatically
-#
-# BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration(+1000)
-# MOUSEKEY_ENABLE = yes # Mouse keys(+4700)
-# EXTRAKEY_ENABLE = yes # Audio control and System control(+450)
-# CONSOLE_ENABLE = no # Console for debug(+400)
-# COMMAND_ENABLE = yes # Commands for debug and configuration
-# NKRO_ENABLE = yes # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
-# BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality
-# MIDI_ENABLE = no # MIDI support (+2400 to 4200, depending on config)
-# AUDIO_ENABLE = no # Audio output on port C6
-# UNICODE_ENABLE = no # Unicode
-# BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID
-# RGBLIGHT_ENABLE = no # Enable WS2812 RGB underlight.
-# SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend
-
diff --git a/keyboards/thevankeyboards/bananasplit/rules.mk b/keyboards/thevankeyboards/bananasplit/rules.mk
index 81570c493a..19f0e81f51 100644
--- a/keyboards/thevankeyboards/bananasplit/rules.mk
+++ b/keyboards/thevankeyboards/bananasplit/rules.mk
@@ -1,51 +1,15 @@
# MCU name
MCU = atmega32u4
-# Processor frequency.
-# This will define a symbol, F_CPU, in all source code files equal to the
-# processor frequency in Hz. You can then use this symbol in your source code to
-# calculate timings. Do NOT tack on a 'UL' at the end, this will be done
-# automatically to create a 32-bit value in your source code.
-#
-# This will be an integer division of F_USB below, as it is sourced by
-# F_USB after it has run through any CPU prescalers. Note that this value
-# does not *change* the processor frequency - it should merely be updated to
-# reflect the processor speed set externally so that the code can use accurate
-# software delays.
-F_CPU = 16000000
-
-
-#
-# LUFA specific
-#
-# Target architecture (see library "Board Types" documentation).
-ARCH = AVR8
-
-# Input clock frequency.
-# This will define a symbol, F_USB, in all source code files equal to the
-# input clock frequency (before any prescaling is performed) in Hz. This value may
-# differ from F_CPU if prescaling is used on the latter, and is required as the
-# raw input clock is fed directly to the PLL sections of the AVR for high speed
-# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
-# at the end, this will be done automatically to create a 32-bit value in your
-# source code.
-#
-# If no clock division is performed on the input clock inside the AVR (via the
-# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
-F_USB = $(F_CPU)
-
-# Interrupt driven control endpoint task(+60)
-OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
-
-
-# Boot Section Size in *bytes*
-# Teensy halfKay 512
-# Teensy++ halfKay 1024
-# Atmel DFU loader 4096
-# LUFA bootloader 4096
-# USBaspLoader 2048
-OPT_DEFS += -DBOOTLOADER_SIZE=4096
-
+# Bootloader selection
+# Teensy halfkay
+# Pro Micro caterina
+# Atmel DFU atmel-dfu
+# LUFA DFU lufa-dfu
+# QMK DFU qmk-dfu
+# ATmega32A bootloadHID
+# ATmega328P USBasp
+BOOTLOADER = atmel-dfu
# Build Options
# comment out to disable the options.
@@ -59,7 +23,6 @@ COMMAND_ENABLE = yes # Commands for debug and configuration
NKRO_ENABLE = yes # USB Nkey Rollover - not yet supported in LUFA
BACKLIGHT_ENABLE = yes
-
# Optimize size but this may cause error "relocation truncated to fit"
#EXTRALDFLAGS = -Wl,--relax
diff --git a/keyboards/thevankeyboards/caravan/rules.mk b/keyboards/thevankeyboards/caravan/rules.mk
index 6143ed9a66..f21c31f6fd 100644
--- a/keyboards/thevankeyboards/caravan/rules.mk
+++ b/keyboards/thevankeyboards/caravan/rules.mk
@@ -1,17 +1,16 @@
# MCU name
MCU = atmega32u4
-
# Bootloader selection
-# Teensy halfkay
-# Pro Micro caterina
-# Atmel DFU atmel-dfu
-# LUFA DFU lufa-dfu
-# QMK DFU qmk-dfu
-# atmega32a bootloadHID
+# Teensy halfkay
+# Pro Micro caterina
+# Atmel DFU atmel-dfu
+# LUFA DFU lufa-dfu
+# QMK DFU qmk-dfu
+# ATmega32A bootloadHID
+# ATmega328P USBasp
BOOTLOADER = atmel-dfu
-
# Build Options
# change yes to no to disable
#
diff --git a/keyboards/thevankeyboards/minivan/keymaps/default/rules.mk b/keyboards/thevankeyboards/minivan/keymaps/default/rules.mk
deleted file mode 100644
index 7a331cd530..0000000000
--- a/keyboards/thevankeyboards/minivan/keymaps/default/rules.mk
+++ /dev/null
@@ -1,18 +0,0 @@
-# Build Options
-# change to "no" to disable the options, or define them in the Makefile in
-# the appropriate keymap folder that will get included automatically
-#
-BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration(+1000)
-MOUSEKEY_ENABLE = yes # Mouse keys(+4700)
-EXTRAKEY_ENABLE = yes # Audio control and System control(+450)
-CONSOLE_ENABLE = no # Console for debug(+400)
-COMMAND_ENABLE = yes # Commands for debug and configuration
-NKRO_ENABLE = yes # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
-BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality
-MIDI_ENABLE = no # MIDI controls
-AUDIO_ENABLE = no # Audio output on port C6
-UNICODE_ENABLE = no # Unicode
-BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID
-RGBLIGHT_ENABLE = no # Enable WS2812 RGB underlight.
-SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend
-
diff --git a/keyboards/thevankeyboards/minivan/rules.mk b/keyboards/thevankeyboards/minivan/rules.mk
index ea453e4b85..3a2b8ae584 100644
--- a/keyboards/thevankeyboards/minivan/rules.mk
+++ b/keyboards/thevankeyboards/minivan/rules.mk
@@ -1,51 +1,15 @@
# MCU name
MCU = atmega32u4
-# Processor frequency.
-# This will define a symbol, F_CPU, in all source code files equal to the
-# processor frequency in Hz. You can then use this symbol in your source code to
-# calculate timings. Do NOT tack on a 'UL' at the end, this will be done
-# automatically to create a 32-bit value in your source code.
-#
-# This will be an integer division of F_USB below, as it is sourced by
-# F_USB after it has run through any CPU prescalers. Note that this value
-# does not *change* the processor frequency - it should merely be updated to
-# reflect the processor speed set externally so that the code can use accurate
-# software delays.
-F_CPU = 16000000
-
-
-#
-# LUFA specific
-#
-# Target architecture (see library "Board Types" documentation).
-ARCH = AVR8
-
-# Input clock frequency.
-# This will define a symbol, F_USB, in all source code files equal to the
-# input clock frequency (before any prescaling is performed) in Hz. This value may
-# differ from F_CPU if prescaling is used on the latter, and is required as the
-# raw input clock is fed directly to the PLL sections of the AVR for high speed
-# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
-# at the end, this will be done automatically to create a 32-bit value in your
-# source code.
-#
-# If no clock division is performed on the input clock inside the AVR (via the
-# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
-F_USB = $(F_CPU)
-
-# Interrupt driven control endpoint task(+60)
-OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
-
-
-# Boot Section Size in *bytes*
-# Teensy halfKay 512
-# Teensy++ halfKay 1024
-# Atmel DFU loader 4096
-# LUFA bootloader 4096
-# USBaspLoader 2048
-OPT_DEFS += -DBOOTLOADER_SIZE=4096
-
+# Bootloader selection
+# Teensy halfkay
+# Pro Micro caterina
+# Atmel DFU atmel-dfu
+# LUFA DFU lufa-dfu
+# QMK DFU qmk-dfu
+# ATmega32A bootloadHID
+# ATmega328P USBasp
+BOOTLOADER = atmel-dfu
# Build Options
# change yes to no to disable
@@ -53,7 +17,7 @@ OPT_DEFS += -DBOOTLOADER_SIZE=4096
BOOTMAGIC_ENABLE = yes # Virtual DIP switch configuration(+1000)
MOUSEKEY_ENABLE = yes # Mouse keys(+4700)
EXTRAKEY_ENABLE = yes # Audio control and System control(+450)
-CONSOLE_ENABLE = yes # Console for debug(+400)
+CONSOLE_ENABLE = no # Console for debug(+400)
COMMAND_ENABLE = yes # Commands for debug and configuration
# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend
diff --git a/keyboards/thevankeyboards/roadkit/keymaps/default/rules.mk b/keyboards/thevankeyboards/roadkit/keymaps/default/rules.mk
deleted file mode 100644
index 7a331cd530..0000000000
--- a/keyboards/thevankeyboards/roadkit/keymaps/default/rules.mk
+++ /dev/null
@@ -1,18 +0,0 @@
-# Build Options
-# change to "no" to disable the options, or define them in the Makefile in
-# the appropriate keymap folder that will get included automatically
-#
-BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration(+1000)
-MOUSEKEY_ENABLE = yes # Mouse keys(+4700)
-EXTRAKEY_ENABLE = yes # Audio control and System control(+450)
-CONSOLE_ENABLE = no # Console for debug(+400)
-COMMAND_ENABLE = yes # Commands for debug and configuration
-NKRO_ENABLE = yes # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
-BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality
-MIDI_ENABLE = no # MIDI controls
-AUDIO_ENABLE = no # Audio output on port C6
-UNICODE_ENABLE = no # Unicode
-BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID
-RGBLIGHT_ENABLE = no # Enable WS2812 RGB underlight.
-SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend
-
diff --git a/keyboards/thevankeyboards/roadkit/rules.mk b/keyboards/thevankeyboards/roadkit/rules.mk
index c2afaa85a8..79cbec757f 100644
--- a/keyboards/thevankeyboards/roadkit/rules.mk
+++ b/keyboards/thevankeyboards/roadkit/rules.mk
@@ -1,51 +1,15 @@
# MCU name
MCU = atmega32u4
-# Processor frequency.
-# This will define a symbol, F_CPU, in all source code files equal to the
-# processor frequency in Hz. You can then use this symbol in your source code to
-# calculate timings. Do NOT tack on a 'UL' at the end, this will be done
-# automatically to create a 32-bit value in your source code.
-#
-# This will be an integer division of F_USB below, as it is sourced by
-# F_USB after it has run through any CPU prescalers. Note that this value
-# does not *change* the processor frequency - it should merely be updated to
-# reflect the processor speed set externally so that the code can use accurate
-# software delays.
-F_CPU = 16000000
-
-
-#
-# LUFA specific
-#
-# Target architecture (see library "Board Types" documentation).
-ARCH = AVR8
-
-# Input clock frequency.
-# This will define a symbol, F_USB, in all source code files equal to the
-# input clock frequency (before any prescaling is performed) in Hz. This value may
-# differ from F_CPU if prescaling is used on the latter, and is required as the
-# raw input clock is fed directly to the PLL sections of the AVR for high speed
-# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
-# at the end, this will be done automatically to create a 32-bit value in your
-# source code.
-#
-# If no clock division is performed on the input clock inside the AVR (via the
-# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
-F_USB = $(F_CPU)
-
-# Interrupt driven control endpoint task(+60)
-OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
-
-
-# Boot Section Size in *bytes*
-# Teensy halfKay 512
-# Teensy++ halfKay 1024
-# Atmel DFU loader 4096
-# LUFA bootloader 4096
-# USBaspLoader 2048
-OPT_DEFS += -DBOOTLOADER_SIZE=4096
-
+# Bootloader selection
+# Teensy halfkay
+# Pro Micro caterina
+# Atmel DFU atmel-dfu
+# LUFA DFU lufa-dfu
+# QMK DFU qmk-dfu
+# ATmega32A bootloadHID
+# ATmega328P USBasp
+BOOTLOADER = atmel-dfu
# Build Options
# change yes to no to disable
@@ -53,7 +17,7 @@ OPT_DEFS += -DBOOTLOADER_SIZE=4096
BOOTMAGIC_ENABLE = yes # Virtual DIP switch configuration(+1000)
MOUSEKEY_ENABLE = yes # Mouse keys(+4700)
EXTRAKEY_ENABLE = yes # Audio control and System control(+450)
-CONSOLE_ENABLE = yes # Console for debug(+400)
+CONSOLE_ENABLE = no # Console for debug(+400)
COMMAND_ENABLE = yes # Commands for debug and configuration
# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend
diff --git a/keyboards/tmo50/rules.mk b/keyboards/tmo50/rules.mk
index f18bf73e83..84abd20e6e 100644
--- a/keyboards/tmo50/rules.mk
+++ b/keyboards/tmo50/rules.mk
@@ -1,43 +1,14 @@
# MCU name
MCU = atmega32u4
-# Processor frequency.
-# This will define a symbol, F_CPU, in all source code files equal to the
-# processor frequency in Hz. You can then use this symbol in your source code to
-# calculate timings. Do NOT tack on a 'UL' at the end, this will be done
-# automatically to create a 32-bit value in your source code.
-#
-# This will be an integer division of F_USB below, as it is sourced by
-# F_USB after it has run through any CPU prescalers. Note that this value
-# does not *change* the processor frequency - it should merely be updated to
-# reflect the processor speed set externally so that the code can use accurate
-# software delays.
-F_CPU = 16000000
-
-
-#
-# LUFA specific
-#
-# Target architecture (see library "Board Types" documentation).
-ARCH = AVR8
-
-# Input clock frequency.
-# This will define a symbol, F_USB, in all source code files equal to the
-# input clock frequency (before any prescaling is performed) in Hz. This value may
-# differ from F_CPU if prescaling is used on the latter, and is required as the
-# raw input clock is fed directly to the PLL sections of the AVR for high speed
-# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
-# at the end, this will be done automatically to create a 32-bit value in your
-# source code.
-#
-# If no clock division is performed on the input clock inside the AVR (via the
-# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
-F_USB = $(F_CPU)
-
-# Interrupt driven control endpoint task(+60)
-OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
-
# Bootloader selection
+# Teensy halfkay
+# Pro Micro caterina
+# Atmel DFU atmel-dfu
+# LUFA DFU lufa-dfu
+# QMK DFU qmk-dfu
+# ATmega32A bootloadHID
+# ATmega328P USBasp
BOOTLOADER = atmel-dfu
# Build Options
diff --git a/keyboards/toad/rules.mk b/keyboards/toad/rules.mk
index ee87c6e8d4..df45fa5df0 100644
--- a/keyboards/toad/rules.mk
+++ b/keyboards/toad/rules.mk
@@ -1,45 +1,15 @@
# MCU name
MCU = atmega32u4
-# Processor frequency.
-# This will define a symbol, F_CPU, in all source code files equal to the
-# processor frequency in Hz. You can then use this symbol in your source code to
-# calculate timings. Do NOT tack on a 'UL' at the end, this will be done
-# automatically to create a 32-bit value in your source code.
-#
-# This will be an integer division of F_USB below, as it is sourced by
-# F_USB after it has run through any CPU prescalers. Note that this value
-# does not *change* the processor frequency - it should merely be updated to
-# reflect the processor speed set externally so that the code can use accurate
-# software delays.
-F_CPU = 16000000
-
-#
-# LUFA specific
-#
-# Target architecture (see library "Board Types" documentation).
-ARCH = AVR8
-
-# Input clock frequency.
-# This will define a symbol, F_USB, in all source code files equal to the
-# input clock frequency (before any prescaling is performed) in Hz. This value may
-# differ from F_CPU if prescaling is used on the latter, and is required as the
-# raw input clock is fed directly to the PLL sections of the AVR for high speed
-# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
-# at the end, this will be done automatically to create a 32-bit value in your
-# source code.
-#
-# If no clock division is performed on the input clock inside the AVR (via the
-# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
-F_USB = $(F_CPU)
-
-# Interrupt driven control endpoint task(+60)
-OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
-
-
-# Boot Section Size in *bytes*
-OPT_DEFS += -DBOOTLOADER_SIZE=4096
-
+# Bootloader selection
+# Teensy halfkay
+# Pro Micro caterina
+# Atmel DFU atmel-dfu
+# LUFA DFU lufa-dfu
+# QMK DFU qmk-dfu
+# ATmega32A bootloadHID
+# ATmega328P USBasp
+BOOTLOADER = atmel-dfu
# Build Options
# comment out to disable the options.
@@ -53,4 +23,4 @@ SLEEP_LED_ENABLE ?= no # Breathing sleep LED during USB suspend
NKRO_ENABLE ?= yes # USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
BACKLIGHT_ENABLE ?= no # Enable keyboard backlight functionality
AUDIO_ENABLE ?= no
-RGBLIGHT_ENABLE ?= no \ No newline at end of file
+RGBLIGHT_ENABLE ?= no
diff --git a/keyboards/tokyo60/rules.mk b/keyboards/tokyo60/rules.mk
index 3ec2e6150e..644e6a5412 100644
--- a/keyboards/tokyo60/rules.mk
+++ b/keyboards/tokyo60/rules.mk
@@ -1,55 +1,14 @@
# MCU name
MCU = atmega32u4
-# Processor frequency.
-# This will define a symbol, F_CPU, in all source code files equal to the
-# processor frequency in Hz. You can then use this symbol in your source code to
-# calculate timings. Do NOT tack on a 'UL' at the end, this will be done
-# automatically to create a 32-bit value in your source code.
-#
-# This will be an integer division of F_USB below, as it is sourced by
-# F_USB after it has run through any CPU prescalers. Note that this value
-# does not *change* the processor frequency - it should merely be updated to
-# reflect the processor speed set externally so that the code can use accurate
-# software delays.
-F_CPU = 16000000
-
-
-#
-# LUFA specific
-#
-# Target architecture (see library "Board Types" documentation).
-ARCH = AVR8
-
-# Input clock frequency.
-# This will define a symbol, F_USB, in all source code files equal to the
-# input clock frequency (before any prescaling is performed) in Hz. This value may
-# differ from F_CPU if prescaling is used on the latter, and is required as the
-# raw input clock is fed directly to the PLL sections of the AVR for high speed
-# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
-# at the end, this will be done automatically to create a 32-bit value in your
-# source code.
-#
-# If no clock division is performed on the input clock inside the AVR (via the
-# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
-F_USB = $(F_CPU)
-
-# Interrupt driven control endpoint task(+60)
-OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
-
-
-# Boot Section Size in *bytes*
-# Teensy halfKay 512
-# Teensy++ halfKay 1024
-# Atmel DFU loader 4096
-# LUFA bootloader 4096
-# USBaspLoader 2048
-OPT_DEFS += -DBOOTLOADER_SIZE=4096
-
-# Bootloader
-# This definition is optional, and if your keyboard supports multiple bootloaders of
-# different sizes, comment this out, and the correct address will be loaded
-# automatically (+60). See bootloader.mk for all options.
+# Bootloader selection
+# Teensy halfkay
+# Pro Micro caterina
+# Atmel DFU atmel-dfu
+# LUFA DFU lufa-dfu
+# QMK DFU qmk-dfu
+# ATmega32A bootloadHID
+# ATmega328P USBasp
BOOTLOADER = atmel-dfu
# Build Options
diff --git a/keyboards/touchpad/rules.mk b/keyboards/touchpad/rules.mk
index e4fa2ac133..21642c3d28 100644
--- a/keyboards/touchpad/rules.mk
+++ b/keyboards/touchpad/rules.mk
@@ -1,49 +1,16 @@
# MCU name
MCU = atmega32u4
-SRC = matrix.c i2c_master.c
-
-# Processor frequency.
-# This will define a symbol, F_CPU, in all source code files equal to the
-# processor frequency in Hz. You can then use this symbol in your source code to
-# calculate timings. Do NOT tack on a 'UL' at the end, this will be done
-# automatically to create a 32-bit value in your source code.
-#
-# This will be an integer division of F_USB below, as it is sourced by
-# F_USB after it has run through any CPU prescalers. Note that this value
-# does not *change* the processor frequency - it should merely be updated to
-# reflect the processor speed set externally so that the code can use accurate
-# software delays.
-F_CPU = 16000000
-
-#
-# LUFA specific
-#
-# Target architecture (see library "Board Types" documentation).
-ARCH = AVR8
-
-# Input clock frequency.
-# This will define a symbol, F_USB, in all source code files equal to the
-# input clock frequency (before any prescaling is performed) in Hz. This value may
-# differ from F_CPU if prescaling is used on the latter, and is required as the
-# raw input clock is fed directly to the PLL sections of the AVR for high speed
-# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
-# at the end, this will be done automatically to create a 32-bit value in your
-# source code.
-#
-# If no clock division is performed on the input clock inside the AVR (via the
-# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
-F_USB = $(F_CPU)
-
-# Bootloader
-# This definition is optional, and if your keyboard supports multiple bootloaders of
-# different sizes, comment this out, and the correct address will be loaded
-# automatically (+60). See bootloader.mk for all options.
+# Bootloader selection
+# Teensy halfkay
+# Pro Micro caterina
+# Atmel DFU atmel-dfu
+# LUFA DFU lufa-dfu
+# QMK DFU qmk-dfu
+# ATmega32A bootloadHID
+# ATmega328P USBasp
BOOTLOADER = caterina
-# Interrupt driven control endpoint task(+60)
-OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
-
# Build Options
# change to "no" to disable the options, or define them in the Makefile in
# the appropriate keymap folder that will get included automatically
@@ -65,3 +32,5 @@ CUSTOM_MATRIX = yes
# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend
+
+SRC += matrix.c i2c_master.c
diff --git a/keyboards/treadstone32/keymaps/default/rules.mk b/keyboards/treadstone32/keymaps/default/rules.mk
index 8c4541fa19..5ca4c52586 100644
--- a/keyboards/treadstone32/keymaps/default/rules.mk
+++ b/keyboards/treadstone32/keymaps/default/rules.mk
@@ -1,10 +1,7 @@
-
# Build Options
# change to "no" to disable the options, or define them in the Makefile in
# the appropriate keymap folder that will get included automatically
#
-TAP_DANCE_ENABLE = no
-
# If your custom treadstone32 pcb, you can rewrite to yes.
RGBLIGHT_ENABLE = yes # LED underglow (Enable WS2812 RGB underlight.)
LED_ANIMATIONS = yes # LED animations
@@ -20,6 +17,3 @@ endif
ifeq ($(strip $(IOS_DEVICE_ENABLE)), yes)
OPT_DEFS += -DIOS_DEVICE_ENABLE
endif
-
-# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
-SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend
diff --git a/keyboards/treadstone32/rules.mk b/keyboards/treadstone32/rules.mk
index 1d37dfc69f..dbc46b403c 100644
--- a/keyboards/treadstone32/rules.mk
+++ b/keyboards/treadstone32/rules.mk
@@ -1,50 +1,16 @@
# MCU name
MCU = atmega32u4
-# Processor frequency.
-# This will define a symbol, F_CPU, in all source code files equal to the
-# processor frequency in Hz. You can then use this symbol in your source code to
-# calculate timings. Do NOT tack on a 'UL' at the end, this will be done
-# automatically to create a 32-bit value in your source code.
-#
-# This will be an integer division of F_USB below, as it is sourced by
-# F_USB after it has run through any CPU prescalers. Note that this value
-# does not *change* the processor frequency - it should merely be updated to
-# reflect the processor speed set externally so that the code can use accurate
-# software delays.
-F_CPU = 16000000
-
-#
-# LUFA specific
-#
-# Target architecture (see library "Board Types" documentation).
-ARCH = AVR8
-
-# Input clock frequency.
-# This will define a symbol, F_USB, in all source code files equal to the
-# input clock frequency (before any prescaling is performed) in Hz. This value may
-# differ from F_CPU if prescaling is used on the latter, and is required as the
-# raw input clock is fed directly to the PLL sections of the AVR for high speed
-# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
-# at the end, this will be done automatically to create a 32-bit value in your
-# source code.
-#
-# If no clock division is performed on the input clock inside the AVR (via the
-# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
-F_USB = $(F_CPU)
-
# Bootloader selection
# Teensy halfkay
# Pro Micro caterina
# Atmel DFU atmel-dfu
# LUFA DFU lufa-dfu
# QMK DFU qmk-dfu
-# atmega32a bootloadHID
+# ATmega32A bootloadHID
+# ATmega328P USBasp
BOOTLOADER = atmel-dfu
-# Interrupt driven control endpoint task(+60)
-OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
-
# Build Options
# change yes to no to disable
#
@@ -61,4 +27,3 @@ UNICODE_ENABLE = no # Unicode
BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID
RGBLIGHT_ENABLE = no # Enable WS2812 RGB underlight.
LEADER_ENABLE = no
-
diff --git a/keyboards/treadstone48/keymaps/default/rules.mk b/keyboards/treadstone48/keymaps/default/rules.mk
index c53226431d..38ef4cc9fe 100644
--- a/keyboards/treadstone48/keymaps/default/rules.mk
+++ b/keyboards/treadstone48/keymaps/default/rules.mk
@@ -1,21 +1,3 @@
-
-# Build Options
-# change to "no" to disable the options, or define them in the Makefile in
-# the appropriate keymap folder that will get included automatically
-#
-BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration(+1000)
-MOUSEKEY_ENABLE = no # Mouse keys(+4700)
-EXTRAKEY_ENABLE = no # Audio control and System control(+450)
-CONSOLE_ENABLE = no # Console for debug(+400)
-COMMAND_ENABLE = no # Commands for debug and configuration
-NKRO_ENABLE = no # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
-BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality
-MIDI_ENABLE = no # MIDI controls
-AUDIO_ENABLE = no # Audio output on port C6
-UNICODE_ENABLE = no # Unicode
-BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID
-RGBLIGHT_ENABLE = no # Enable WS2812 RGB underlight. Do not enable this with audio at the same time.
-SWAP_HANDS_ENABLE = no # Enable one-hand typing
TAP_DANCE_ENABLE = yes
# If your custom treadstone48 pcb, you can rewrite to yes.
diff --git a/keyboards/treadstone48/rules.mk b/keyboards/treadstone48/rules.mk
index 8b0d3cd30a..fd3c6df570 100644
--- a/keyboards/treadstone48/rules.mk
+++ b/keyboards/treadstone48/rules.mk
@@ -1,51 +1,16 @@
-SRC += i2c.c
-SRC += serial.c
-SRC += ssd1306.c
-
# MCU name
MCU = atmega32u4
-# Processor frequency.
-# This will define a symbol, F_CPU, in all source code files equal to the
-# processor frequency in Hz. You can then use this symbol in your source code to
-# calculate timings. Do NOT tack on a 'UL' at the end, this will be done
-# automatically to create a 32-bit value in your source code.
-#
-# This will be an integer division of F_USB below, as it is sourced by
-# F_USB after it has run through any CPU prescalers. Note that this value
-# does not *change* the processor frequency - it should merely be updated to
-# reflect the processor speed set externally so that the code can use accurate
-# software delays.
-F_CPU = 16000000
-
-#
-# LUFA specific
-#
-# Target architecture (see library "Board Types" documentation).
-ARCH = AVR8
-
-# Input clock frequency.
-# This will define a symbol, F_USB, in all source code files equal to the
-# input clock frequency (before any prescaling is performed) in Hz. This value may
-# differ from F_CPU if prescaling is used on the latter, and is required as the
-# raw input clock is fed directly to the PLL sections of the AVR for high speed
-# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
-# at the end, this will be done automatically to create a 32-bit value in your
-# source code.
-#
-# If no clock division is performed on the input clock inside the AVR (via the
-# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
-F_USB = $(F_CPU)
-
-# Bootloader
-# This definition is optional, and if your keyboard supports multiple bootloaders of
-# different sizes, comment this out, and the correct address will be loaded
-# automatically (+60). See bootloader.mk for all options.
+# Bootloader selection
+# Teensy halfkay
+# Pro Micro caterina
+# Atmel DFU atmel-dfu
+# LUFA DFU lufa-dfu
+# QMK DFU qmk-dfu
+# ATmega32A bootloadHID
+# ATmega328P USBasp
BOOTLOADER = caterina
-# Interrupt driven control endpoint task(+60)
-OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
-
# Build Options
# change to "no" to disable the options, or define them in the Makefile in
# the appropriate keymap folder that will get included automatically
@@ -70,3 +35,7 @@ SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend
CUSTOM_MATRIX = yes
DEFAULT_FOLDER = treadstone48/rev1
+
+SRC += i2c.c
+SRC += serial.c
+SRC += ssd1306.c
diff --git a/keyboards/treasure/type9/rules.mk b/keyboards/treasure/type9/rules.mk
index af90959e1f..370c683a54 100644
--- a/keyboards/treasure/type9/rules.mk
+++ b/keyboards/treasure/type9/rules.mk
@@ -1,63 +1,16 @@
# MCU name
MCU = atmega32u4
-# Processor frequency.
-# This will define a symbol, F_CPU, in all source code files equal to the
-# processor frequency in Hz. You can then use this symbol in your source code to
-# calculate timings. Do NOT tack on a 'UL' at the end, this will be done
-# automatically to create a 32-bit value in your source code.
-#
-# This will be an integer division of F_USB below, as it is sourced by
-# F_USB after it has run through any CPU prescalers. Note that this value
-# does not *change* the processor frequency - it should merely be updated to
-# reflect the processor speed set externally so that the code can use accurate
-# software delays.
-F_CPU = 16000000
-
-
-#
-# LUFA specific
-#
-# Target architecture (see library "Board Types" documentation).
-ARCH = AVR8
-
-# Input clock frequency.
-# This will define a symbol, F_USB, in all source code files equal to the
-# input clock frequency (before any prescaling is performed) in Hz. This value may
-# differ from F_CPU if prescaling is used on the latter, and is required as the
-# raw input clock is fed directly to the PLL sections of the AVR for high speed
-# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
-# at the end, this will be done automatically to create a 32-bit value in your
-# source code.
-#
-# If no clock division is performed on the input clock inside the AVR (via the
-# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
-F_USB = $(F_CPU)
-
-# Interrupt driven control endpoint task(+60)
-OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
-
-
# Bootloader selection
# Teensy halfkay
# Pro Micro caterina
# Atmel DFU atmel-dfu
# LUFA DFU lufa-dfu
# QMK DFU qmk-dfu
-# atmega32a bootloadHID
+# ATmega32A bootloadHID
+# ATmega328P USBasp
BOOTLOADER = atmel-dfu
-
-# If you don't know the bootloader type, then you can specify the
-# Boot Section Size in *bytes* by uncommenting out the OPT_DEFS line
-# Teensy halfKay 512
-# Teensy++ halfKay 1024
-# Atmel DFU loader 4096
-# LUFA bootloader 4096
-# USBaspLoader 2048
-OPT_DEFS += -DBOOTLOADER_SIZE=4096
-
-
# Build Options
# change yes to no to disable
#
diff --git a/keyboards/uzu42/rev1/rules.mk b/keyboards/uzu42/rev1/rules.mk
index 9d0da7e0f8..1e3cebb145 100644
--- a/keyboards/uzu42/rev1/rules.mk
+++ b/keyboards/uzu42/rev1/rules.mk
@@ -1,20 +1 @@
-# Build Options
-# change to "no" to disable the options, or define them in the Makefile in
-# the appropriate keymap folder that will get included automatically
-#
-BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration(+1000)
-MOUSEKEY_ENABLE = no # Mouse keys(+4700)
-EXTRAKEY_ENABLE = no # Audio control and System control(+450)
-CONSOLE_ENABLE = no # Console for debug(+400)
-COMMAND_ENABLE = no # Commands for debug and configuration
-NKRO_ENABLE = no # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
-BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality
-MIDI_ENABLE = no # MIDI controls
-AUDIO_ENABLE = no # Audio output on port C6
-UNICODE_ENABLE = no # Unicode
-BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID
-RGBLIGHT_ENABLE = yes # Enable WS2812 RGB underlight.
-SWAP_HANDS_ENABLE = no # Enable one-hand typing
-
-# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
-SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend
+RGBLIGHT_ENABLE = yes
diff --git a/keyboards/uzu42/rules.mk b/keyboards/uzu42/rules.mk
index ff69431d43..aea23f3cd0 100644
--- a/keyboards/uzu42/rules.mk
+++ b/keyboards/uzu42/rules.mk
@@ -1,6 +1,3 @@
-# if firmware size over limit, try this option
-# CFLAGS += -flto
-
# MCU name
MCU = atmega32u4
@@ -14,11 +11,6 @@ MCU = atmega32u4
# ATmega328P USBasp
BOOTLOADER = caterina
-# Use split_common libraries
-SPLIT_KEYBOARD = yes
-
-DEFAULT_FOLDER = uzu42/rev1
-
# Build Options
# change to "no" to disable the options, or define them in the Makefile in
# the appropriate keymap folder that will get included automatically
@@ -38,3 +30,6 @@ RGBLIGHT_ENABLE = no # Enable WS2812 RGB underlight.
# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend
OLED_DRIVER_ENABLE = no # OLED display
+SPLIT_KEYBOARD = yes
+
+DEFAULT_FOLDER = uzu42/rev1
diff --git a/keyboards/v60_type_r/keymaps/default/rules.mk b/keyboards/v60_type_r/keymaps/default/rules.mk
deleted file mode 100644
index b6c9a25805..0000000000
--- a/keyboards/v60_type_r/keymaps/default/rules.mk
+++ /dev/null
@@ -1,2 +0,0 @@
-BACKLIGHT_ENABLE = no
-RGBLIGHT_ENABLE = no
diff --git a/keyboards/v60_type_r/keymaps/iso/rules.mk b/keyboards/v60_type_r/keymaps/iso/rules.mk
deleted file mode 100644
index b6c9a25805..0000000000
--- a/keyboards/v60_type_r/keymaps/iso/rules.mk
+++ /dev/null
@@ -1,2 +0,0 @@
-BACKLIGHT_ENABLE = no
-RGBLIGHT_ENABLE = no
diff --git a/keyboards/v60_type_r/rules.mk b/keyboards/v60_type_r/rules.mk
index 35a79db161..7533dff3db 100644
--- a/keyboards/v60_type_r/rules.mk
+++ b/keyboards/v60_type_r/rules.mk
@@ -1,53 +1,16 @@
# MCU name
MCU = atmega32u4
-# Processor frequency.
-# This will define a symbol, F_CPU, in all source code files equal to the
-# processor frequency in Hz. You can then use this symbol in your source code to
-# calculate timings. Do NOT tack on a 'UL' at the end, this will be done
-# automatically to create a 32-bit value in your source code.
-#
-# This will be an integer division of F_USB below, as it is sourced by
-# F_USB after it has run through any CPU prescalers. Note that this value
-# does not *change* the processor frequency - it should merely be updated to
-# reflect the processor speed set externally so that the code can use accurate
-# software delays.
-F_CPU = 16000000
-
-
-#
-# LUFA specific
-#
-# Target architecture (see library "Board Types" documentation).
-ARCH = AVR8
-
-# Input clock frequency.
-# This will define a symbol, F_USB, in all source code files equal to the
-# input clock frequency (before any prescaling is performed) in Hz. This value may
-# differ from F_CPU if prescaling is used on the latter, and is required as the
-# raw input clock is fed directly to the PLL sections of the AVR for high speed
-# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
-# at the end, this will be done automatically to create a 32-bit value in your
-# source code.
-#
-# If no clock division is performed on the input clock inside the AVR (via the
-# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
-F_USB = $(F_CPU)
-
-# Interrupt driven control endpoint task(+60)
-OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
-
-
# Bootloader selection
# Teensy halfkay
# Pro Micro caterina
# Atmel DFU atmel-dfu
# LUFA DFU lufa-dfu
# QMK DFU qmk-dfu
-# atmega32a bootloadHID
+# ATmega32A bootloadHID
+# ATmega328P USBasp
BOOTLOADER = atmel-dfu
-
# Build Options
# change yes to no to disable
#
diff --git a/keyboards/vision_division/keymaps/default/rules.mk b/keyboards/vision_division/keymaps/default/rules.mk
index 69a3b2cd29..ef72559a0c 100644
--- a/keyboards/vision_division/keymaps/default/rules.mk
+++ b/keyboards/vision_division/keymaps/default/rules.mk
@@ -1,18 +1 @@
-# Build Options
-# change to "no" to disable the options, or define them in the Makefile in
-# the appropriate keymap folder that will get included automatically
-#
-BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration(+1000)
-MOUSEKEY_ENABLE = yes # Mouse keys(+4700)
-EXTRAKEY_ENABLE = yes # Audio control and System control(+450)
-CONSOLE_ENABLE = yes # Console for debug(+400)
-COMMAND_ENABLE = yes # Commands for debug and configuration
-NKRO_ENABLE = yes # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
-BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality
-MIDI_ENABLE = no # MIDI controls
-AUDIO_ENABLE = yes # Audio output on port C6
-UNICODE_ENABLE = no # Unicode
-BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID
-RGBLIGHT_ENABLE = no # Enable WS2812 RGB underlight.
-SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend
-
+AUDIO_ENABLE = yes
diff --git a/keyboards/vitamins_included/keymaps/default/rules.mk b/keyboards/vitamins_included/keymaps/default/rules.mk
deleted file mode 100644
index 8b13789179..0000000000
--- a/keyboards/vitamins_included/keymaps/default/rules.mk
+++ /dev/null
@@ -1 +0,0 @@
-
diff --git a/keyboards/vitamins_included/rev1/rules.mk b/keyboards/vitamins_included/rev1/rules.mk
index 4b1454e155..8b96b5ca43 100644
--- a/keyboards/vitamins_included/rev1/rules.mk
+++ b/keyboards/vitamins_included/rev1/rules.mk
@@ -1,2 +1,11 @@
-SPLIT_KEYBOARD = yes
+# Bootloader selection
+# Teensy halfkay
+# Pro Micro caterina
+# Atmel DFU atmel-dfu
+# LUFA DFU lufa-dfu
+# QMK DFU qmk-dfu
+# ATmega32A bootloadHID
+# ATmega328P USBasp
BOOTLOADER = caterina
+
+SPLIT_KEYBOARD = yes
diff --git a/keyboards/vitamins_included/rev2/rules.mk b/keyboards/vitamins_included/rev2/rules.mk
index 3d8bbe0f61..bacfbea396 100644
--- a/keyboards/vitamins_included/rev2/rules.mk
+++ b/keyboards/vitamins_included/rev2/rules.mk
@@ -1,2 +1,11 @@
-SPLIT_KEYBOARD = yes # Rev2 uses split_common
+# Bootloader selection
+# Teensy halfkay
+# Pro Micro caterina
+# Atmel DFU atmel-dfu
+# LUFA DFU lufa-dfu
+# QMK DFU qmk-dfu
+# ATmega32A bootloadHID
+# ATmega328P USBasp
BOOTLOADER = qmk-dfu
+
+SPLIT_KEYBOARD = yes
diff --git a/keyboards/vitamins_included/rules.mk b/keyboards/vitamins_included/rules.mk
index 761df0357b..d81b4a9146 100644
--- a/keyboards/vitamins_included/rules.mk
+++ b/keyboards/vitamins_included/rules.mk
@@ -25,4 +25,4 @@ LAYOUTS = ortho_4x12
DEFAULT_FOLDER = vitamins_included/rev2
-LINK_TIME_OPTIMIZATION_ENABLE = yes \ No newline at end of file
+LINK_TIME_OPTIMIZATION_ENABLE = yes
diff --git a/keyboards/vn66/rules.mk b/keyboards/vn66/rules.mk
index ad8bb587ce..37005c1276 100644
--- a/keyboards/vn66/rules.mk
+++ b/keyboards/vn66/rules.mk
@@ -1,27 +1,16 @@
# MCU name
MCU = atmega32u4
-
# Bootloader selection
# Teensy halfkay
# Pro Micro caterina
# Atmel DFU atmel-dfu
# LUFA DFU lufa-dfu
# QMK DFU qmk-dfu
-# atmega32a bootloadHID
+# ATmega32A bootloadHID
+# ATmega328P USBasp
BOOTLOADER = atmel-dfu
-
-# If you don't know the bootloader type, then you can specify the
-# Boot Section Size in *bytes* by uncommenting out the OPT_DEFS line
-# Teensy halfKay 512
-# Teensy++ halfKay 1024
-# Atmel DFU loader 4096
-# LUFA bootloader 4096
-# USBaspLoader 2048
-# OPT_DEFS += -DBOOTLOADER_SIZE=4096
-
-
# Build Options
# change yes to no to disable
#
diff --git a/keyboards/waldo/keymaps/default/rules.mk b/keyboards/waldo/keymaps/default/rules.mk
deleted file mode 100644
index e69de29bb2..0000000000
--- a/keyboards/waldo/keymaps/default/rules.mk
+++ /dev/null
diff --git a/keyboards/waldo/keymaps/default_split_shft_bck/rules.mk b/keyboards/waldo/keymaps/default_split_shft_bck/rules.mk
deleted file mode 100644
index e69de29bb2..0000000000
--- a/keyboards/waldo/keymaps/default_split_shft_bck/rules.mk
+++ /dev/null
diff --git a/keyboards/waldo/rules.mk b/keyboards/waldo/rules.mk
index 6b3a9b96cc..c174a9eb96 100644
--- a/keyboards/waldo/rules.mk
+++ b/keyboards/waldo/rules.mk
@@ -1,15 +1,16 @@
# MCU name
MCU = atmega32u4
-# Bootloader
-# This definition is optional, and if your keyboard supports multiple bootloaders of
-# different sizes, comment this out, and the correct address will be loaded
-# automatically (+60). See bootloader.mk for all options.
+# Bootloader selection
+# Teensy halfkay
+# Pro Micro caterina
+# Atmel DFU atmel-dfu
+# LUFA DFU lufa-dfu
+# QMK DFU qmk-dfu
+# ATmega32A bootloadHID
+# ATmega328P USBasp
BOOTLOADER = atmel-dfu
-# Interrupt driven control endpoint task(+60)
-OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
-
# Build Options
# change to "no" to disable the options, or define them in the Makefile in
# the appropriate keymap folder that will get included automatically
diff --git a/keyboards/westfoxtrot/aanzee/rules.mk b/keyboards/westfoxtrot/aanzee/rules.mk
index 4ba66a5f78..5032b0d296 100644
--- a/keyboards/westfoxtrot/aanzee/rules.mk
+++ b/keyboards/westfoxtrot/aanzee/rules.mk
@@ -1,49 +1,14 @@
# MCU name
MCU = atmega32u4
-# Processor frequency.
-# This will define a symbol, F_CPU, in all source code files equal to the
-# processor frequency in Hz. You can then use this symbol in your source code to
-# calculate timings. Do NOT tack on a 'UL' at the end, this will be done
-# automatically to create a 32-bit value in your source code.
-#
-# This will be an integer division of F_USB below, as it is sourced by
-# F_USB after it has run through any CPU prescalers. Note that this value
-# does not *change* the processor frequency - it should merely be updated to
-# reflect the processor speed set externally so that the code can use accurate
-# software delays.
-F_CPU = 16000000
-
-
-#
-# LUFA specific
-#
-# Target architecture (see library "Board Types" documentation).
-ARCH = AVR8
-
-# Input clock frequency.
-# This will define a symbol, F_USB, in all source code files equal to the
-# input clock frequency (before any prescaling is performed) in Hz. This value may
-# differ from F_CPU if prescaling is used on the latter, and is required as the
-# raw input clock is fed directly to the PLL sections of the AVR for high speed
-# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
-# at the end, this will be done automatically to create a 32-bit value in your
-# source code.
-#
-# If no clock division is performed on the input clock inside the AVR (via the
-# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
-F_USB = $(F_CPU)
-
-# Interrupt driven control endpoint task(+60)
-OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
-
# Bootloader selection
# Teensy halfkay
# Pro Micro caterina
# Atmel DFU atmel-dfu
# LUFA DFU lufa-dfu
# QMK DFU qmk-dfu
-# atmega32a bootloadHID
+# ATmega32A bootloadHID
+# ATmega328P USBasp
BOOTLOADER = atmel-dfu
# Build Options
diff --git a/keyboards/westfoxtrot/cyclops/rules.mk b/keyboards/westfoxtrot/cyclops/rules.mk
index 10ea513910..04b2bc82f6 100644
--- a/keyboards/westfoxtrot/cyclops/rules.mk
+++ b/keyboards/westfoxtrot/cyclops/rules.mk
@@ -1,63 +1,16 @@
# MCU name
MCU = atmega32u4
-# Processor frequency.
-# This will define a symbol, F_CPU, in all source code files equal to the
-# processor frequency in Hz. You can then use this symbol in your source code to
-# calculate timings. Do NOT tack on a 'UL' at the end, this will be done
-# automatically to create a 32-bit value in your source code.
-#
-# This will be an integer division of F_USB below, as it is sourced by
-# F_USB after it has run through any CPU prescalers. Note that this value
-# does not *change* the processor frequency - it should merely be updated to
-# reflect the processor speed set externally so that the code can use accurate
-# software delays.
-F_CPU = 16000000
-
-
-#
-# LUFA specific
-#
-# Target architecture (see library "Board Types" documentation).
-ARCH = AVR8
-
-# Input clock frequency.
-# This will define a symbol, F_USB, in all source code files equal to the
-# input clock frequency (before any prescaling is performed) in Hz. This value may
-# differ from F_CPU if prescaling is used on the latter, and is required as the
-# raw input clock is fed directly to the PLL sections of the AVR for high speed
-# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
-# at the end, this will be done automatically to create a 32-bit value in your
-# source code.
-#
-# If no clock division is performed on the input clock inside the AVR (via the
-# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
-F_USB = $(F_CPU)
-
-# Interrupt driven control endpoint task(+60)
-OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
-
-
# Bootloader selection
# Teensy halfkay
# Pro Micro caterina
# Atmel DFU atmel-dfu
# LUFA DFU lufa-dfu
# QMK DFU qmk-dfu
-# atmega32a bootloadHID
+# ATmega32A bootloadHID
+# ATmega328P USBasp
BOOTLOADER = atmel-dfu
-
-# If you don't know the bootloader type, then you can specify the
-# Boot Section Size in *bytes* by uncommenting out the OPT_DEFS line
-# Teensy halfKay 512
-# Teensy++ halfKay 1024
-# Atmel DFU loader 4096
-# LUFA bootloader 4096
-# USBaspLoader 2048
-# OPT_DEFS += -DBOOTLOADER_SIZE=4096
-
-
# Build Options
# change yes to no to disable
#
@@ -77,4 +30,4 @@ UNICODE_ENABLE = no # Unicode
BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID
AUDIO_ENABLE = no # Audio output on port C6
FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches
-HD44780_ENABLE = no # Enable support for HD44780 based LCDs (+400) \ No newline at end of file
+HD44780_ENABLE = no # Enable support for HD44780 based LCDs (+400)
diff --git a/keyboards/westfoxtrot/cypher/rules.mk b/keyboards/westfoxtrot/cypher/rules.mk
index 63cbd36756..4703282ff2 100644
--- a/keyboards/westfoxtrot/cypher/rules.mk
+++ b/keyboards/westfoxtrot/cypher/rules.mk
@@ -1,63 +1,16 @@
# MCU name
MCU = atmega32u4
-# Processor frequency.
-# This will define a symbol, F_CPU, in all source code files equal to the
-# processor frequency in Hz. You can then use this symbol in your source code to
-# calculate timings. Do NOT tack on a 'UL' at the end, this will be done
-# automatically to create a 32-bit value in your source code.
-#
-# This will be an integer division of F_USB below, as it is sourced by
-# F_USB after it has run through any CPU prescalers. Note that this value
-# does not *change* the processor frequency - it should merely be updated to
-# reflect the processor speed set externally so that the code can use accurate
-# software delays.
-F_CPU = 16000000
-
-
-#
-# LUFA specific
-#
-# Target architecture (see library "Board Types" documentation).
-ARCH = AVR8
-
-# Input clock frequency.
-# This will define a symbol, F_USB, in all source code files equal to the
-# input clock frequency (before any prescaling is performed) in Hz. This value may
-# differ from F_CPU if prescaling is used on the latter, and is required as the
-# raw input clock is fed directly to the PLL sections of the AVR for high speed
-# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
-# at the end, this will be done automatically to create a 32-bit value in your
-# source code.
-#
-# If no clock division is performed on the input clock inside the AVR (via the
-# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
-F_USB = $(F_CPU)
-
-# Interrupt driven control endpoint task(+60)
-OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
-
-
# Bootloader selection
# Teensy halfkay
# Pro Micro caterina
# Atmel DFU atmel-dfu
# LUFA DFU lufa-dfu
# QMK DFU qmk-dfu
-# atmega32a bootloadHID
+# ATmega32A bootloadHID
+# ATmega328P USBasp
BOOTLOADER = atmel-dfu
-
-# If you don't know the bootloader type, then you can specify the
-# Boot Section Size in *bytes* by uncommenting out the OPT_DEFS line
-# Teensy halfKay 512
-# Teensy++ halfKay 1024
-# Atmel DFU loader 4096
-# LUFA bootloader 4096
-# USBaspLoader 2048
-# OPT_DEFS += -DBOOTLOADER_SIZE=4096
-
-
# Build Options
# change yes to no to disable
#
diff --git a/keyboards/wilba_tech/rama_works_koyu/rules.mk b/keyboards/wilba_tech/rama_works_koyu/rules.mk
index ebcb6a455f..cf6a8a96a0 100644
--- a/keyboards/wilba_tech/rama_works_koyu/rules.mk
+++ b/keyboards/wilba_tech/rama_works_koyu/rules.mk
@@ -1,10 +1,3 @@
-# project specific files
-SRC = keyboards/wilba_tech/wt_main.c \
- keyboards/wilba_tech/wt_rgb_backlight.c \
- quantum/color.c \
- drivers/issi/is31fl3731.c \
- drivers/avr/i2c_master.c
-
# MCU name
MCU = atmega32u4
@@ -47,4 +40,9 @@ RAW_ENABLE = yes
DYNAMIC_KEYMAP_ENABLE = yes
CIE1931_CURVE = yes
-#LAYOUTS = ???
+# project specific files
+SRC = keyboards/wilba_tech/wt_main.c \
+ keyboards/wilba_tech/wt_rgb_backlight.c \
+ quantum/color.c \
+ drivers/issi/is31fl3731.c \
+ drivers/avr/i2c_master.c
diff --git a/keyboards/wilba_tech/rama_works_m10_b/rules.mk b/keyboards/wilba_tech/rama_works_m10_b/rules.mk
index 99330021f2..07372d0ac2 100644
--- a/keyboards/wilba_tech/rama_works_m10_b/rules.mk
+++ b/keyboards/wilba_tech/rama_works_m10_b/rules.mk
@@ -1,6 +1,3 @@
-# project specific files
-SRC = keyboards/wilba_tech/wt_main.c
-
# MCU name
MCU = atmega32u4
@@ -14,7 +11,6 @@ MCU = atmega32u4
# ATmega328P USBasp
BOOTLOADER = atmel-dfu
-
# Build Options
# change yes to no to disable
#
@@ -36,3 +32,6 @@ FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches
RAW_ENABLE = yes
DYNAMIC_KEYMAP_ENABLE = yes
+
+# project specific files
+SRC = keyboards/wilba_tech/wt_main.c
diff --git a/keyboards/wilba_tech/rama_works_m60_a/rules.mk b/keyboards/wilba_tech/rama_works_m60_a/rules.mk
index 4ce5dc54cb..1dec6c074f 100644
--- a/keyboards/wilba_tech/rama_works_m60_a/rules.mk
+++ b/keyboards/wilba_tech/rama_works_m60_a/rules.mk
@@ -1,12 +1,3 @@
-
-
-# project specific files
-SRC = keyboards/wilba_tech/wt_main.c \
- keyboards/wilba_tech/wt_rgb_backlight.c \
- quantum/color.c \
- drivers/issi/is31fl3731.c \
- drivers/avr/i2c_master.c
-
# MCU name
MCU = atmega32u4
@@ -50,3 +41,10 @@ DYNAMIC_KEYMAP_ENABLE = yes
CIE1931_CURVE = yes
LAYOUTS = 60_hhkb
+
+# project specific files
+SRC = keyboards/wilba_tech/wt_main.c \
+ keyboards/wilba_tech/wt_rgb_backlight.c \
+ quantum/color.c \
+ drivers/issi/is31fl3731.c \
+ drivers/avr/i2c_master.c
diff --git a/keyboards/wilba_tech/rama_works_m6_a/rules.mk b/keyboards/wilba_tech/rama_works_m6_a/rules.mk
index 32f0e25de8..5feee31120 100644
--- a/keyboards/wilba_tech/rama_works_m6_a/rules.mk
+++ b/keyboards/wilba_tech/rama_works_m6_a/rules.mk
@@ -1,6 +1,3 @@
-# project specific files
-SRC = keyboards/wilba_tech/wt_main.c
-
# MCU name
MCU = atmega32u4
@@ -19,7 +16,6 @@ BOOTLOADER = atmel-dfu
# backlight effects.
OPT_DEFS += -DNO_SUSPEND_POWER_DOWN
-
# Build Options
# change yes to no to disable
#
@@ -43,3 +39,5 @@ RAW_ENABLE = yes
DYNAMIC_KEYMAP_ENABLE = yes
CIE1931_CURVE = no
+# project specific files
+SRC = keyboards/wilba_tech/wt_main.c
diff --git a/keyboards/wilba_tech/rama_works_m6_b/rules.mk b/keyboards/wilba_tech/rama_works_m6_b/rules.mk
index c016fa344f..4c14af06c4 100644
--- a/keyboards/wilba_tech/rama_works_m6_b/rules.mk
+++ b/keyboards/wilba_tech/rama_works_m6_b/rules.mk
@@ -1,10 +1,3 @@
-# project specific files
-SRC = keyboards/wilba_tech/wt_main.c \
- keyboards/wilba_tech/wt_rgb_backlight.c \
- quantum/color.c \
- drivers/issi/is31fl3218.c \
- drivers/avr/i2c_master.c
-
# MCU name
MCU = atmega32u4
@@ -23,7 +16,6 @@ BOOTLOADER = atmel-dfu
# backlight effects.
OPT_DEFS += -DNO_SUSPEND_POWER_DOWN
-
# Build Options
# change yes to no to disable
#
@@ -47,3 +39,9 @@ RAW_ENABLE = yes
DYNAMIC_KEYMAP_ENABLE = yes
CIE1931_CURVE = yes
+# project specific files
+SRC = keyboards/wilba_tech/wt_main.c \
+ keyboards/wilba_tech/wt_rgb_backlight.c \
+ quantum/color.c \
+ drivers/issi/is31fl3218.c \
+ drivers/avr/i2c_master.c
diff --git a/keyboards/wilba_tech/rama_works_u80_a/rules.mk b/keyboards/wilba_tech/rama_works_u80_a/rules.mk
index caecaecbb7..0f02cd04f3 100644
--- a/keyboards/wilba_tech/rama_works_u80_a/rules.mk
+++ b/keyboards/wilba_tech/rama_works_u80_a/rules.mk
@@ -1,10 +1,3 @@
-# project specific files
-SRC = keyboards/wilba_tech/wt_main.c \
- keyboards/wilba_tech/wt_rgb_backlight.c \
- quantum/color.c \
- drivers/issi/is31fl3731.c \
- drivers/avr/i2c_master.c
-
# MCU name
MCU = atmega32u4
@@ -18,7 +11,6 @@ MCU = atmega32u4
# ATmega328P USBasp
BOOTLOADER = atmel-dfu
-
# Build Options
# change yes to no to disable
#
@@ -41,3 +33,10 @@ FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches
RAW_ENABLE = yes
DYNAMIC_KEYMAP_ENABLE = yes
CIE1931_CURVE = yes
+
+# project specific files
+SRC = keyboards/wilba_tech/wt_main.c \
+ keyboards/wilba_tech/wt_rgb_backlight.c \
+ quantum/color.c \
+ drivers/issi/is31fl3731.c \
+ drivers/avr/i2c_master.c
diff --git a/keyboards/wilba_tech/wt60_a/keymaps/via/rules.mk b/keyboards/wilba_tech/wt60_a/keymaps/via/rules.mk
index 8834bf0c8e..4880a57bec 100644
--- a/keyboards/wilba_tech/wt60_a/keymaps/via/rules.mk
+++ b/keyboards/wilba_tech/wt60_a/keymaps/via/rules.mk
@@ -1,2 +1,2 @@
RAW_ENABLE = yes
-DYNAMIC_KEYMAP_ENABLE = yes \ No newline at end of file
+DYNAMIC_KEYMAP_ENABLE = yes
diff --git a/keyboards/wilba_tech/wt60_a/rules.mk b/keyboards/wilba_tech/wt60_a/rules.mk
index 4f702fab49..111c94ee80 100644
--- a/keyboards/wilba_tech/wt60_a/rules.mk
+++ b/keyboards/wilba_tech/wt60_a/rules.mk
@@ -1,54 +1,16 @@
-# project specific files
-SRC = drivers/issi/is31fl3736.c \
- drivers/avr/i2c_master.c \
- quantum/color.c \
- keyboards/wilba_tech/wt_mono_backlight.c \
- keyboards/wilba_tech/wt_main.c
-
# MCU name
MCU = atmega32u4
-# Processor frequency.
-# This will define a symbol, F_CPU, in all source code files equal to the
-# processor frequency in Hz. You can then use this symbol in your source code to
-# calculate timings. Do NOT tack on a 'UL' at the end, this will be done
-# automatically to create a 32-bit value in your source code.
-#
-# This will be an integer division of F_USB below, as it is sourced by
-# F_USB after it has run through any CPU prescalers. Note that this value
-# does not *change* the processor frequency - it should merely be updated to
-# reflect the processor speed set externally so that the code can use accurate
-# software delays.
-F_CPU = 16000000
-
-
-#
-# LUFA specific
-#
-# Target architecture (see library "Board Types" documentation).
-ARCH = AVR8
-
-# Input clock frequency.
-# This will define a symbol, F_USB, in all source code files equal to the
-# input clock frequency (before any prescaling is performed) in Hz. This value may
-# differ from F_CPU if prescaling is used on the latter, and is required as the
-# raw input clock is fed directly to the PLL sections of the AVR for high speed
-# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
-# at the end, this will be done automatically to create a 32-bit value in your
-# source code.
-#
-# If no clock division is performed on the input clock inside the AVR (via the
-# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
-F_USB = $(F_CPU)
-
-# Interrupt driven control endpoint task(+60)
-OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
-
-
-# Boot Section
+# Bootloader selection
+# Teensy halfkay
+# Pro Micro caterina
+# Atmel DFU atmel-dfu
+# LUFA DFU lufa-dfu
+# QMK DFU qmk-dfu
+# ATmega32A bootloadHID
+# ATmega328P USBasp
BOOTLOADER = atmel-dfu
-
# Build Options
# change yes to no to disable
#
@@ -67,3 +29,10 @@ UNICODE_ENABLE = no # Unicode
BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID
AUDIO_ENABLE = no # Audio output on port C6
FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches
+
+# project specific files
+SRC = drivers/issi/is31fl3736.c \
+ drivers/avr/i2c_master.c \
+ quantum/color.c \
+ keyboards/wilba_tech/wt_mono_backlight.c \
+ keyboards/wilba_tech/wt_main.c
diff --git a/keyboards/wilba_tech/wt60_d/keymaps/via/rules.mk b/keyboards/wilba_tech/wt60_d/keymaps/via/rules.mk
index 8834bf0c8e..4880a57bec 100644
--- a/keyboards/wilba_tech/wt60_d/keymaps/via/rules.mk
+++ b/keyboards/wilba_tech/wt60_d/keymaps/via/rules.mk
@@ -1,2 +1,2 @@
RAW_ENABLE = yes
-DYNAMIC_KEYMAP_ENABLE = yes \ No newline at end of file
+DYNAMIC_KEYMAP_ENABLE = yes
diff --git a/keyboards/wilba_tech/wt60_d/rules.mk b/keyboards/wilba_tech/wt60_d/rules.mk
index 7ba0b9223b..07372d0ac2 100644
--- a/keyboards/wilba_tech/wt60_d/rules.mk
+++ b/keyboards/wilba_tech/wt60_d/rules.mk
@@ -1,6 +1,3 @@
-# project specific files
-SRC = keyboards/wilba_tech/wt_main.c
-
# MCU name
MCU = atmega32u4
@@ -34,4 +31,7 @@ AUDIO_ENABLE = no # Audio output on port C6
FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches
RAW_ENABLE = yes
-DYNAMIC_KEYMAP_ENABLE = yes \ No newline at end of file
+DYNAMIC_KEYMAP_ENABLE = yes
+
+# project specific files
+SRC = keyboards/wilba_tech/wt_main.c
diff --git a/keyboards/wilba_tech/wt65_a/keymaps/via/rules.mk b/keyboards/wilba_tech/wt65_a/keymaps/via/rules.mk
index 8834bf0c8e..4880a57bec 100644
--- a/keyboards/wilba_tech/wt65_a/keymaps/via/rules.mk
+++ b/keyboards/wilba_tech/wt65_a/keymaps/via/rules.mk
@@ -1,2 +1,2 @@
RAW_ENABLE = yes
-DYNAMIC_KEYMAP_ENABLE = yes \ No newline at end of file
+DYNAMIC_KEYMAP_ENABLE = yes
diff --git a/keyboards/wilba_tech/wt65_a/rules.mk b/keyboards/wilba_tech/wt65_a/rules.mk
index 9b5bd1e7f9..111c94ee80 100644
--- a/keyboards/wilba_tech/wt65_a/rules.mk
+++ b/keyboards/wilba_tech/wt65_a/rules.mk
@@ -1,10 +1,3 @@
-# project specific files
-SRC = drivers/issi/is31fl3736.c \
- drivers/avr/i2c_master.c \
- quantum/color.c \
- keyboards/wilba_tech/wt_mono_backlight.c \
- keyboards/wilba_tech/wt_main.c
-
# MCU name
MCU = atmega32u4
@@ -18,7 +11,6 @@ MCU = atmega32u4
# ATmega328P USBasp
BOOTLOADER = atmel-dfu
-
# Build Options
# change yes to no to disable
#
@@ -37,3 +29,10 @@ UNICODE_ENABLE = no # Unicode
BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID
AUDIO_ENABLE = no # Audio output on port C6
FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches
+
+# project specific files
+SRC = drivers/issi/is31fl3736.c \
+ drivers/avr/i2c_master.c \
+ quantum/color.c \
+ keyboards/wilba_tech/wt_mono_backlight.c \
+ keyboards/wilba_tech/wt_main.c
diff --git a/keyboards/wilba_tech/wt65_b/keymaps/via/rules.mk b/keyboards/wilba_tech/wt65_b/keymaps/via/rules.mk
index 8834bf0c8e..4880a57bec 100644
--- a/keyboards/wilba_tech/wt65_b/keymaps/via/rules.mk
+++ b/keyboards/wilba_tech/wt65_b/keymaps/via/rules.mk
@@ -1,2 +1,2 @@
RAW_ENABLE = yes
-DYNAMIC_KEYMAP_ENABLE = yes \ No newline at end of file
+DYNAMIC_KEYMAP_ENABLE = yes
diff --git a/keyboards/wilba_tech/wt65_b/rules.mk b/keyboards/wilba_tech/wt65_b/rules.mk
index 9b5bd1e7f9..111c94ee80 100644
--- a/keyboards/wilba_tech/wt65_b/rules.mk
+++ b/keyboards/wilba_tech/wt65_b/rules.mk
@@ -1,10 +1,3 @@
-# project specific files
-SRC = drivers/issi/is31fl3736.c \
- drivers/avr/i2c_master.c \
- quantum/color.c \
- keyboards/wilba_tech/wt_mono_backlight.c \
- keyboards/wilba_tech/wt_main.c
-
# MCU name
MCU = atmega32u4
@@ -18,7 +11,6 @@ MCU = atmega32u4
# ATmega328P USBasp
BOOTLOADER = atmel-dfu
-
# Build Options
# change yes to no to disable
#
@@ -37,3 +29,10 @@ UNICODE_ENABLE = no # Unicode
BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID
AUDIO_ENABLE = no # Audio output on port C6
FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches
+
+# project specific files
+SRC = drivers/issi/is31fl3736.c \
+ drivers/avr/i2c_master.c \
+ quantum/color.c \
+ keyboards/wilba_tech/wt_mono_backlight.c \
+ keyboards/wilba_tech/wt_main.c
diff --git a/keyboards/wilba_tech/wt69_a/keymaps/via/rules.mk b/keyboards/wilba_tech/wt69_a/keymaps/via/rules.mk
index 8834bf0c8e..4880a57bec 100644
--- a/keyboards/wilba_tech/wt69_a/keymaps/via/rules.mk
+++ b/keyboards/wilba_tech/wt69_a/keymaps/via/rules.mk
@@ -1,2 +1,2 @@
RAW_ENABLE = yes
-DYNAMIC_KEYMAP_ENABLE = yes \ No newline at end of file
+DYNAMIC_KEYMAP_ENABLE = yes
diff --git a/keyboards/wilba_tech/wt69_a/rules.mk b/keyboards/wilba_tech/wt69_a/rules.mk
index f349608cd9..7d1c2aa1b1 100644
--- a/keyboards/wilba_tech/wt69_a/rules.mk
+++ b/keyboards/wilba_tech/wt69_a/rules.mk
@@ -1,6 +1,3 @@
-# project specific files
-SRC = keyboards/wilba_tech/wt_main.c
-
# MCU name
MCU = atmega32u4
@@ -14,7 +11,6 @@ MCU = atmega32u4
# ATmega328P USBasp
BOOTLOADER = atmel-dfu
-
# Build Options
# change yes to no to disable
#
@@ -33,3 +29,6 @@ UNICODE_ENABLE = no # Unicode
BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID
AUDIO_ENABLE = no # Audio output on port C6
FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches
+
+# project specific files
+SRC = keyboards/wilba_tech/wt_main.c
diff --git a/keyboards/wilba_tech/wt75_a/keymaps/via/rules.mk b/keyboards/wilba_tech/wt75_a/keymaps/via/rules.mk
index 8834bf0c8e..4880a57bec 100644
--- a/keyboards/wilba_tech/wt75_a/keymaps/via/rules.mk
+++ b/keyboards/wilba_tech/wt75_a/keymaps/via/rules.mk
@@ -1,2 +1,2 @@
RAW_ENABLE = yes
-DYNAMIC_KEYMAP_ENABLE = yes \ No newline at end of file
+DYNAMIC_KEYMAP_ENABLE = yes
diff --git a/keyboards/wilba_tech/wt75_a/rules.mk b/keyboards/wilba_tech/wt75_a/rules.mk
index 9b5bd1e7f9..111c94ee80 100644
--- a/keyboards/wilba_tech/wt75_a/rules.mk
+++ b/keyboards/wilba_tech/wt75_a/rules.mk
@@ -1,10 +1,3 @@
-# project specific files
-SRC = drivers/issi/is31fl3736.c \
- drivers/avr/i2c_master.c \
- quantum/color.c \
- keyboards/wilba_tech/wt_mono_backlight.c \
- keyboards/wilba_tech/wt_main.c
-
# MCU name
MCU = atmega32u4
@@ -18,7 +11,6 @@ MCU = atmega32u4
# ATmega328P USBasp
BOOTLOADER = atmel-dfu
-
# Build Options
# change yes to no to disable
#
@@ -37,3 +29,10 @@ UNICODE_ENABLE = no # Unicode
BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID
AUDIO_ENABLE = no # Audio output on port C6
FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches
+
+# project specific files
+SRC = drivers/issi/is31fl3736.c \
+ drivers/avr/i2c_master.c \
+ quantum/color.c \
+ keyboards/wilba_tech/wt_mono_backlight.c \
+ keyboards/wilba_tech/wt_main.c
diff --git a/keyboards/wilba_tech/wt75_b/keymaps/via/rules.mk b/keyboards/wilba_tech/wt75_b/keymaps/via/rules.mk
index 8834bf0c8e..4880a57bec 100644
--- a/keyboards/wilba_tech/wt75_b/keymaps/via/rules.mk
+++ b/keyboards/wilba_tech/wt75_b/keymaps/via/rules.mk
@@ -1,2 +1,2 @@
RAW_ENABLE = yes
-DYNAMIC_KEYMAP_ENABLE = yes \ No newline at end of file
+DYNAMIC_KEYMAP_ENABLE = yes
diff --git a/keyboards/wilba_tech/wt75_b/rules.mk b/keyboards/wilba_tech/wt75_b/rules.mk
index 9b5bd1e7f9..111c94ee80 100644
--- a/keyboards/wilba_tech/wt75_b/rules.mk
+++ b/keyboards/wilba_tech/wt75_b/rules.mk
@@ -1,10 +1,3 @@
-# project specific files
-SRC = drivers/issi/is31fl3736.c \
- drivers/avr/i2c_master.c \
- quantum/color.c \
- keyboards/wilba_tech/wt_mono_backlight.c \
- keyboards/wilba_tech/wt_main.c
-
# MCU name
MCU = atmega32u4
@@ -18,7 +11,6 @@ MCU = atmega32u4
# ATmega328P USBasp
BOOTLOADER = atmel-dfu
-
# Build Options
# change yes to no to disable
#
@@ -37,3 +29,10 @@ UNICODE_ENABLE = no # Unicode
BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID
AUDIO_ENABLE = no # Audio output on port C6
FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches
+
+# project specific files
+SRC = drivers/issi/is31fl3736.c \
+ drivers/avr/i2c_master.c \
+ quantum/color.c \
+ keyboards/wilba_tech/wt_mono_backlight.c \
+ keyboards/wilba_tech/wt_main.c
diff --git a/keyboards/wilba_tech/wt75_c/keymaps/via/rules.mk b/keyboards/wilba_tech/wt75_c/keymaps/via/rules.mk
index 8834bf0c8e..4880a57bec 100644
--- a/keyboards/wilba_tech/wt75_c/keymaps/via/rules.mk
+++ b/keyboards/wilba_tech/wt75_c/keymaps/via/rules.mk
@@ -1,2 +1,2 @@
RAW_ENABLE = yes
-DYNAMIC_KEYMAP_ENABLE = yes \ No newline at end of file
+DYNAMIC_KEYMAP_ENABLE = yes
diff --git a/keyboards/wilba_tech/wt75_c/rules.mk b/keyboards/wilba_tech/wt75_c/rules.mk
index 9b5bd1e7f9..111c94ee80 100644
--- a/keyboards/wilba_tech/wt75_c/rules.mk
+++ b/keyboards/wilba_tech/wt75_c/rules.mk
@@ -1,10 +1,3 @@
-# project specific files
-SRC = drivers/issi/is31fl3736.c \
- drivers/avr/i2c_master.c \
- quantum/color.c \
- keyboards/wilba_tech/wt_mono_backlight.c \
- keyboards/wilba_tech/wt_main.c
-
# MCU name
MCU = atmega32u4
@@ -18,7 +11,6 @@ MCU = atmega32u4
# ATmega328P USBasp
BOOTLOADER = atmel-dfu
-
# Build Options
# change yes to no to disable
#
@@ -37,3 +29,10 @@ UNICODE_ENABLE = no # Unicode
BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID
AUDIO_ENABLE = no # Audio output on port C6
FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches
+
+# project specific files
+SRC = drivers/issi/is31fl3736.c \
+ drivers/avr/i2c_master.c \
+ quantum/color.c \
+ keyboards/wilba_tech/wt_mono_backlight.c \
+ keyboards/wilba_tech/wt_main.c
diff --git a/keyboards/wilba_tech/wt80_a/keymaps/via/rules.mk b/keyboards/wilba_tech/wt80_a/keymaps/via/rules.mk
index 8834bf0c8e..4880a57bec 100644
--- a/keyboards/wilba_tech/wt80_a/keymaps/via/rules.mk
+++ b/keyboards/wilba_tech/wt80_a/keymaps/via/rules.mk
@@ -1,2 +1,2 @@
RAW_ENABLE = yes
-DYNAMIC_KEYMAP_ENABLE = yes \ No newline at end of file
+DYNAMIC_KEYMAP_ENABLE = yes
diff --git a/keyboards/wilba_tech/wt80_a/rules.mk b/keyboards/wilba_tech/wt80_a/rules.mk
index 9b5bd1e7f9..111c94ee80 100644
--- a/keyboards/wilba_tech/wt80_a/rules.mk
+++ b/keyboards/wilba_tech/wt80_a/rules.mk
@@ -1,10 +1,3 @@
-# project specific files
-SRC = drivers/issi/is31fl3736.c \
- drivers/avr/i2c_master.c \
- quantum/color.c \
- keyboards/wilba_tech/wt_mono_backlight.c \
- keyboards/wilba_tech/wt_main.c
-
# MCU name
MCU = atmega32u4
@@ -18,7 +11,6 @@ MCU = atmega32u4
# ATmega328P USBasp
BOOTLOADER = atmel-dfu
-
# Build Options
# change yes to no to disable
#
@@ -37,3 +29,10 @@ UNICODE_ENABLE = no # Unicode
BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID
AUDIO_ENABLE = no # Audio output on port C6
FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches
+
+# project specific files
+SRC = drivers/issi/is31fl3736.c \
+ drivers/avr/i2c_master.c \
+ quantum/color.c \
+ keyboards/wilba_tech/wt_mono_backlight.c \
+ keyboards/wilba_tech/wt_main.c
diff --git a/keyboards/wilba_tech/wt8_a/rules.mk b/keyboards/wilba_tech/wt8_a/rules.mk
index 5e87a29959..7d1c2aa1b1 100644
--- a/keyboards/wilba_tech/wt8_a/rules.mk
+++ b/keyboards/wilba_tech/wt8_a/rules.mk
@@ -1,6 +1,3 @@
-# project specific files
-SRC = keyboards/wilba_tech/wt_main.c
-
# MCU name
MCU = atmega32u4
@@ -32,3 +29,6 @@ UNICODE_ENABLE = no # Unicode
BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID
AUDIO_ENABLE = no # Audio output on port C6
FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches
+
+# project specific files
+SRC = keyboards/wilba_tech/wt_main.c
diff --git a/keyboards/wilba_tech/zeal60/rules.mk b/keyboards/wilba_tech/zeal60/rules.mk
index b8d63050c6..11f3867de3 100644
--- a/keyboards/wilba_tech/zeal60/rules.mk
+++ b/keyboards/wilba_tech/zeal60/rules.mk
@@ -1,10 +1,3 @@
-# project specific files
-SRC = keyboards/wilba_tech/wt_main.c \
- keyboards/wilba_tech/wt_rgb_backlight.c \
- quantum/color.c \
- drivers/issi/is31fl3731.c \
- drivers/avr/i2c_master.c
-
# MCU name
MCU = atmega32u4
@@ -48,3 +41,10 @@ DYNAMIC_KEYMAP_ENABLE = yes
CIE1931_CURVE = yes
LAYOUTS = 60_ansi 60_iso 60_hhkb 60_ansi_split_bs_rshift
+
+# project specific files
+SRC = keyboards/wilba_tech/wt_main.c \
+ keyboards/wilba_tech/wt_rgb_backlight.c \
+ quantum/color.c \
+ drivers/issi/is31fl3731.c \
+ drivers/avr/i2c_master.c
diff --git a/keyboards/wilba_tech/zeal65/rules.mk b/keyboards/wilba_tech/zeal65/rules.mk
index f0df996561..6c8783eb29 100644
--- a/keyboards/wilba_tech/zeal65/rules.mk
+++ b/keyboards/wilba_tech/zeal65/rules.mk
@@ -1,10 +1,3 @@
-# project specific files
-SRC = keyboards/wilba_tech/wt_main.c \
- keyboards/wilba_tech/wt_rgb_backlight.c \
- quantum/color.c \
- drivers/issi/is31fl3731.c \
- drivers/avr/i2c_master.c
-
# MCU name
MCU = atmega32u4
@@ -46,3 +39,10 @@ SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend
RAW_ENABLE = yes
DYNAMIC_KEYMAP_ENABLE = yes
CIE1931_CURVE = yes
+
+# project specific files
+SRC = keyboards/wilba_tech/wt_main.c \
+ keyboards/wilba_tech/wt_rgb_backlight.c \
+ quantum/color.c \
+ drivers/issi/is31fl3731.c \
+ drivers/avr/i2c_master.c
diff --git a/keyboards/xd60/rev2/rules.mk b/keyboards/xd60/rev2/rules.mk
index 42f9842af1..37f281b0cc 100644
--- a/keyboards/xd60/rev2/rules.mk
+++ b/keyboards/xd60/rev2/rules.mk
@@ -1,52 +1,15 @@
# MCU name
MCU = atmega32u4
-
-# Processor frequency.
-# This will define a symbol, F_CPU, in all source code files equal to the
-# processor frequency in Hz. You can then use this symbol in your source code to
-# calculate timings. Do NOT tack on a 'UL' at the end, this will be done
-# automatically to create a 32-bit value in your source code.
-#
-# This will be an integer division of F_USB below, as it is sourced by
-# F_USB after it has run through any CPU prescalers. Note that this value
-# does not *change* the processor frequency - it should merely be updated to
-# reflect the processor speed set externally so that the code can use accurate
-# software delays.
-F_CPU = 16000000
-
-
-# LUFA specific
-# Target architecture (see library "Board Types" documentation).
-ARCH = AVR8
-
-
-# Input clock frequency.
-# This will define a symbol, F_USB, in all source code files equal to the
-# input clock frequency (before any prescaling is performed) in Hz. This value may
-# differ from F_CPU if prescaling is used on the latter, and is required as the
-# raw input clock is fed directly to the PLL sections of the AVR for high speed
-# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
-# at the end, this will be done automatically to create a 32-bit value in your
-# source code.
-#
-# If no clock division is performed on the input clock inside the AVR (via the
-# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
-F_USB = $(F_CPU)
-
-
-# Interrupt driven control endpoint task(+60)
-OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
-
-
-# Boot Section Size in *bytes*
-# Teensy halfKay 512
-# Teensy++ halfKay 1024
-# Atmel DFU loader 4096
-# LUFA bootloader 4096
-# USBaspLoader 2048
-OPT_DEFS += -DBOOTLOADER_SIZE=4096
-
+# Bootloader selection
+# Teensy halfkay
+# Pro Micro caterina
+# Atmel DFU atmel-dfu
+# LUFA DFU lufa-dfu
+# QMK DFU qmk-dfu
+# ATmega32A bootloadHID
+# ATmega328P USBasp
+BOOTLOADER = atmel-dfu
# Build Options
BOOTMAGIC_ENABLE = yes # Virtual DIP switch configuration(+1000)
diff --git a/keyboards/xd60/rev3/rules.mk b/keyboards/xd60/rev3/rules.mk
index 36f259e054..8e1fd415b1 100644
--- a/keyboards/xd60/rev3/rules.mk
+++ b/keyboards/xd60/rev3/rules.mk
@@ -1,53 +1,16 @@
# MCU name
MCU = atmega32u4
-
-# Processor frequency.
-# This will define a symbol, F_CPU, in all source code files equal to the
-# processor frequency in Hz. You can then use this symbol in your source code to
-# calculate timings. Do NOT tack on a 'UL' at the end, this will be done
-# automatically to create a 32-bit value in your source code.
-#
-# This will be an integer division of F_USB below, as it is sourced by
-# F_USB after it has run through any CPU prescalers. Note that this value
-# does not *change* the processor frequency - it should merely be updated to
-# reflect the processor speed set externally so that the code can use accurate
-# software delays.
-F_CPU = 16000000
-
-
-# LUFA specific
-# Target architecture (see library "Board Types" documentation).
-ARCH = AVR8
-
-
-# Input clock frequency.
-# This will define a symbol, F_USB, in all source code files equal to the
-# input clock frequency (before any prescaling is performed) in Hz. This value may
-# differ from F_CPU if prescaling is used on the latter, and is required as the
-# raw input clock is fed directly to the PLL sections of the AVR for high speed
-# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
-# at the end, this will be done automatically to create a 32-bit value in your
-# source code.
-#
-# If no clock division is performed on the input clock inside the AVR (via the
-# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
-F_USB = $(F_CPU)
-
-
-# Interrupt driven control endpoint task(+60)
-OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
-
-
-# Boot Section Size in *bytes*
-# Teensy halfKay 512
-# Teensy++ halfKay 1024
-# Atmel DFU loader 4096
-# LUFA bootloader 4096
-# USBaspLoader 2048
+# Bootloader selection
+# Teensy halfkay
+# Pro Micro caterina
+# Atmel DFU atmel-dfu
+# LUFA DFU lufa-dfu
+# QMK DFU qmk-dfu
+# ATmega32A bootloadHID
+# ATmega328P USBasp
BOOTLOADER = atmel-dfu
-
# Build Options
BOOTMAGIC_ENABLE = yes # Virtual DIP switch configuration(+1000)
MOUSEKEY_ENABLE = yes # Mouse keys(+4700)
diff --git a/keyboards/xd75/keymaps/default/rules.mk b/keyboards/xd75/keymaps/default/rules.mk
deleted file mode 100644
index 52a8f38d45..0000000000
--- a/keyboards/xd75/keymaps/default/rules.mk
+++ /dev/null
@@ -1,15 +0,0 @@
-# Copyright 2013 Jun Wako <wakojun@gmail.com>
-#
-# This program is free software: you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation, either version 2 of the License, or
-# (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program. If not, see <http://www.gnu.org/licenses/>.
-
diff --git a/keyboards/xd75/rules.mk b/keyboards/xd75/rules.mk
index 4b2682b192..9052c8c123 100644
--- a/keyboards/xd75/rules.mk
+++ b/keyboards/xd75/rules.mk
@@ -1,50 +1,15 @@
# MCU name
MCU = atmega32u4
-# Processor frequency.
-# This will define a symbol, F_CPU, in all source code files equal to the
-# processor frequency in Hz. You can then use this symbol in your source code to
-# calculate timings. Do NOT tack on a 'UL' at the end, this will be done
-# automatically to create a 32-bit value in your source code.
-#
-# This will be an integer division of F_USB below, as it is sourced by
-# F_USB after it has run through any CPU prescalers. Note that this value
-# does not *change* the processor frequency - it should merely be updated to
-# reflect the processor speed set externally so that the code can use accurate
-# software delays.
-F_CPU = 16000000
-
-
-#
-# LUFA specific
-#
-# Target architecture (see library "Board Types" documentation).
-ARCH = AVR8
-
-# Input clock frequency.
-# This will define a symbol, F_USB, in all source code files equal to the
-# input clock frequency (before any prescaling is performed) in Hz. This value may
-# differ from F_CPU if prescaling is used on the latter, and is required as the
-# raw input clock is fed directly to the PLL sections of the AVR for high speed
-# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
-# at the end, this will be done automatically to create a 32-bit value in your
-# source code.
-#
-# If no clock division is performed on the input clock inside the AVR (via the
-# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
-F_USB = $(F_CPU)
-
-# Interrupt driven control endpoint task(+60)
-OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
-
-
-# Boot Section Size in *bytes*
-# Teensy halfKay 512
-# Teensy++ halfKay 1024
-# Atmel DFU loader 4096
-# LUFA bootloader 4096
-# USBaspLoader 2048
-OPT_DEFS += -DBOOTLOADER_SIZE=4096
+# Bootloader selection
+# Teensy halfkay
+# Pro Micro caterina
+# Atmel DFU atmel-dfu
+# LUFA DFU lufa-dfu
+# QMK DFU qmk-dfu
+# ATmega32A bootloadHID
+# ATmega328P USBasp
+BOOTLOADER = atmel-dfu
# QMK Build Options
# change to "no" to disable the options, or define them in the Makefile in
diff --git a/keyboards/xd84/rules.mk b/keyboards/xd84/rules.mk
index 9166452262..d9d316c133 100644
--- a/keyboards/xd84/rules.mk
+++ b/keyboards/xd84/rules.mk
@@ -1,63 +1,16 @@
# MCU name
MCU = atmega32u4
-# Processor frequency.
-# This will define a symbol, F_CPU, in all source code files equal to the
-# processor frequency in Hz. You can then use this symbol in your source code to
-# calculate timings. Do NOT tack on a 'UL' at the end, this will be done
-# automatically to create a 32-bit value in your source code.
-#
-# This will be an integer division of F_USB below, as it is sourced by
-# F_USB after it has run through any CPU prescalers. Note that this value
-# does not *change* the processor frequency - it should merely be updated to
-# reflect the processor speed set externally so that the code can use accurate
-# software delays.
-F_CPU = 16000000
-
-
-#
-# LUFA specific
-#
-# Target architecture (see library "Board Types" documentation).
-ARCH = AVR8
-
-# Input clock frequency.
-# This will define a symbol, F_USB, in all source code files equal to the
-# input clock frequency (before any prescaling is performed) in Hz. This value may
-# differ from F_CPU if prescaling is used on the latter, and is required as the
-# raw input clock is fed directly to the PLL sections of the AVR for high speed
-# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
-# at the end, this will be done automatically to create a 32-bit value in your
-# source code.
-#
-# If no clock division is performed on the input clock inside the AVR (via the
-# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
-F_USB = $(F_CPU)
-
-# Interrupt driven control endpoint task(+60)
-OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
-
-
# Bootloader selection
# Teensy halfkay
# Pro Micro caterina
# Atmel DFU atmel-dfu
# LUFA DFU lufa-dfu
# QMK DFU qmk-dfu
-# atmega32a bootloadHID
+# ATmega32A bootloadHID
+# ATmega328P USBasp
BOOTLOADER = atmel-dfu
-
-# If you don't know the bootloader type, then you can specify the
-# Boot Section Size in *bytes* by uncommenting out the OPT_DEFS line
-# Teensy halfKay 512
-# Teensy++ halfKay 1024
-# Atmel DFU loader 4096
-# LUFA bootloader 4096
-# USBaspLoader 2048
-# OPT_DEFS += -DBOOTLOADER_SIZE=4096
-
-
# Build Options
# change yes to no to disable
#
diff --git a/keyboards/xd87/keymaps/default_underglow/rules.mk b/keyboards/xd87/keymaps/default_underglow/rules.mk
index 390dad18df..5cf1edf60b 100755
--- a/keyboards/xd87/keymaps/default_underglow/rules.mk
+++ b/keyboards/xd87/keymaps/default_underglow/rules.mk
@@ -1,3 +1,3 @@
BOOTMAGIC_ENABLE = lite
COMMAND_ENABLE = no
-RGBLIGHT_ENABLE = yes \ No newline at end of file
+RGBLIGHT_ENABLE = yes
diff --git a/keyboards/xd87/rules.mk b/keyboards/xd87/rules.mk
index 1b1b6fdf28..3e8e4e1f51 100644
--- a/keyboards/xd87/rules.mk
+++ b/keyboards/xd87/rules.mk
@@ -1,63 +1,16 @@
# MCU name
MCU = atmega32u4
-# Processor frequency.
-# This will define a symbol, F_CPU, in all source code files equal to the
-# processor frequency in Hz. You can then use this symbol in your source code to
-# calculate timings. Do NOT tack on a 'UL' at the end, this will be done
-# automatically to create a 32-bit value in your source code.
-#
-# This will be an integer division of F_USB below, as it is sourced by
-# F_USB after it has run through any CPU prescalers. Note that this value
-# does not *change* the processor frequency - it should merely be updated to
-# reflect the processor speed set externally so that the code can use accurate
-# software delays.
-F_CPU = 16000000
-
-
-#
-# LUFA specific
-#
-# Target architecture (see library "Board Types" documentation).
-ARCH = AVR8
-
-# Input clock frequency.
-# This will define a symbol, F_USB, in all source code files equal to the
-# input clock frequency (before any prescaling is performed) in Hz. This value may
-# differ from F_CPU if prescaling is used on the latter, and is required as the
-# raw input clock is fed directly to the PLL sections of the AVR for high speed
-# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
-# at the end, this will be done automatically to create a 32-bit value in your
-# source code.
-#
-# If no clock division is performed on the input clock inside the AVR (via the
-# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
-F_USB = $(F_CPU)
-
-# Interrupt driven control endpoint task(+60)
-OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
-
-
# Bootloader selection
# Teensy halfkay
# Pro Micro caterina
# Atmel DFU atmel-dfu
# LUFA DFU lufa-dfu
# QMK DFU qmk-dfu
-# atmega32a bootloadHID
+# ATmega32A bootloadHID
+# ATmega328P USBasp
BOOTLOADER = atmel-dfu
-
-# If you don't know the bootloader type, then you can specify the
-# Boot Section Size in *bytes* by uncommenting out the OPT_DEFS line
-# Teensy halfKay 512
-# Teensy++ halfKay 1024
-# Atmel DFU loader 4096
-# LUFA bootloader 4096
-# USBaspLoader 2048
-# OPT_DEFS += -DBOOTLOADER_SIZE=4096
-
-
# Build Options
# change yes to no to disable
#
diff --git a/keyboards/xd96/rules.mk b/keyboards/xd96/rules.mk
index 3a97fe5f98..2079e436c0 100644
--- a/keyboards/xd96/rules.mk
+++ b/keyboards/xd96/rules.mk
@@ -1,63 +1,16 @@
# MCU name
MCU = atmega32u4
-# Processor frequency.
-# This will define a symbol, F_CPU, in all source code files equal to the
-# processor frequency in Hz. You can then use this symbol in your source code to
-# calculate timings. Do NOT tack on a 'UL' at the end, this will be done
-# automatically to create a 32-bit value in your source code.
-#
-# This will be an integer division of F_USB below, as it is sourced by
-# F_USB after it has run through any CPU prescalers. Note that this value
-# does not *change* the processor frequency - it should merely be updated to
-# reflect the processor speed set externally so that the code can use accurate
-# software delays.
-F_CPU = 16000000
-
-
-#
-# LUFA specific
-#
-# Target architecture (see library "Board Types" documentation).
-ARCH = AVR8
-
-# Input clock frequency.
-# This will define a symbol, F_USB, in all source code files equal to the
-# input clock frequency (before any prescaling is performed) in Hz. This value may
-# differ from F_CPU if prescaling is used on the latter, and is required as the
-# raw input clock is fed directly to the PLL sections of the AVR for high speed
-# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
-# at the end, this will be done automatically to create a 32-bit value in your
-# source code.
-#
-# If no clock division is performed on the input clock inside the AVR (via the
-# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
-F_USB = $(F_CPU)
-
-# Interrupt driven control endpoint task(+60)
-OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
-
-
# Bootloader selection
# Teensy halfkay
# Pro Micro caterina
# Atmel DFU atmel-dfu
# LUFA DFU lufa-dfu
# QMK DFU qmk-dfu
-# atmega32a bootloadHID
+# ATmega32A bootloadHID
+# ATmega328P USBasp
BOOTLOADER = atmel-dfu
-
-# If you don't know the bootloader type, then you can specify the
-# Boot Section Size in *bytes* by uncommenting out the OPT_DEFS line
-# Teensy halfKay 512
-# Teensy++ halfKay 1024
-# Atmel DFU loader 4096
-# LUFA bootloader 4096
-# USBaspLoader 2048
-# OPT_DEFS += -DBOOTLOADER_SIZE=4096
-
-
# Build Options
# change yes to no to disable
#
diff --git a/keyboards/xmmx/rules.mk b/keyboards/xmmx/rules.mk
index ee87c6e8d4..df45fa5df0 100644
--- a/keyboards/xmmx/rules.mk
+++ b/keyboards/xmmx/rules.mk
@@ -1,45 +1,15 @@
# MCU name
MCU = atmega32u4
-# Processor frequency.
-# This will define a symbol, F_CPU, in all source code files equal to the
-# processor frequency in Hz. You can then use this symbol in your source code to
-# calculate timings. Do NOT tack on a 'UL' at the end, this will be done
-# automatically to create a 32-bit value in your source code.
-#
-# This will be an integer division of F_USB below, as it is sourced by
-# F_USB after it has run through any CPU prescalers. Note that this value
-# does not *change* the processor frequency - it should merely be updated to
-# reflect the processor speed set externally so that the code can use accurate
-# software delays.
-F_CPU = 16000000
-
-#
-# LUFA specific
-#
-# Target architecture (see library "Board Types" documentation).
-ARCH = AVR8
-
-# Input clock frequency.
-# This will define a symbol, F_USB, in all source code files equal to the
-# input clock frequency (before any prescaling is performed) in Hz. This value may
-# differ from F_CPU if prescaling is used on the latter, and is required as the
-# raw input clock is fed directly to the PLL sections of the AVR for high speed
-# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
-# at the end, this will be done automatically to create a 32-bit value in your
-# source code.
-#
-# If no clock division is performed on the input clock inside the AVR (via the
-# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
-F_USB = $(F_CPU)
-
-# Interrupt driven control endpoint task(+60)
-OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
-
-
-# Boot Section Size in *bytes*
-OPT_DEFS += -DBOOTLOADER_SIZE=4096
-
+# Bootloader selection
+# Teensy halfkay
+# Pro Micro caterina
+# Atmel DFU atmel-dfu
+# LUFA DFU lufa-dfu
+# QMK DFU qmk-dfu
+# ATmega32A bootloadHID
+# ATmega328P USBasp
+BOOTLOADER = atmel-dfu
# Build Options
# comment out to disable the options.
@@ -53,4 +23,4 @@ SLEEP_LED_ENABLE ?= no # Breathing sleep LED during USB suspend
NKRO_ENABLE ?= yes # USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
BACKLIGHT_ENABLE ?= no # Enable keyboard backlight functionality
AUDIO_ENABLE ?= no
-RGBLIGHT_ENABLE ?= no \ No newline at end of file
+RGBLIGHT_ENABLE ?= no
diff --git a/keyboards/xw60/rules.mk b/keyboards/xw60/rules.mk
index 01435ee544..913ac3c024 100644
--- a/keyboards/xw60/rules.mk
+++ b/keyboards/xw60/rules.mk
@@ -1,48 +1,14 @@
# MCU name
MCU = atmega32u4
-# Processor frequency.
-# This will define a symbol, F_CPU, in all source code files equal to the
-# processor frequency in Hz. You can then use this symbol in your source code to
-# calculate timings. Do NOT tack on a 'UL' at the end, this will be done
-# automatically to create a 32-bit value in your source code.
-#
-# This will be an integer division of F_USB below, as it is sourced by
-# F_USB after it has run through any CPU prescalers. Note that this value
-# does not *change* the processor frequency - it should merely be updated to
-# reflect the processor speed set externally so that the code can use accurate
-# software delays.
-F_CPU = 16000000
-
-#
-# LUFA specific
-#
-# Target architecture (see library "Board Types" documentation).
-ARCH = AVR8
-
-# Input clock frequency.
-# This will define a symbol, F_USB, in all source code files equal to the
-# input clock frequency (before any prescaling is performed) in Hz. This value may
-# differ from F_CPU if prescaling is used on the latter, and is required as the
-# raw input clock is fed directly to the PLL sections of the AVR for high speed
-# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
-# at the end, this will be done automatically to create a 32-bit value in your
-# source code.
-#
-# If no clock division is performed on the input clock inside the AVR (via the
-# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
-F_USB = $(F_CPU)
-
-# Interrupt driven control endpoint task(+60)
-OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
-
# Bootloader selection
# Teensy halfkay
# Pro Micro caterina
# Atmel DFU atmel-dfu
# LUFA DFU lufa-dfu
# QMK DFU qmk-dfu
-# atmega32a bootloadHID
+# ATmega32A bootloadHID
+# ATmega328P USBasp
BOOTLOADER = atmel-dfu
# Build Options
diff --git a/keyboards/yd60mq/rules.mk b/keyboards/yd60mq/rules.mk
index 2a89630116..1e6d4bb7cd 100644
--- a/keyboards/yd60mq/rules.mk
+++ b/keyboards/yd60mq/rules.mk
@@ -1,51 +1,16 @@
# MCU name
MCU = atmega32u4
-# Processor frequency.
-# This will define a symbol, F_CPU, in all source code files equal to the
-# processor frequency in Hz. You can then use this symbol in your source code to
-# calculate timings. Do NOT tack on a 'UL' at the end, this will be done
-# automatically to create a 32-bit value in your source code.
-#
-# This will be an integer division of F_USB below, as it is sourced by
-# F_USB after it has run through any CPU prescalers. Note that this value
-# does not *change* the processor frequency - it should merely be updated to
-# reflect the processor speed set externally so that the code can use accurate
-# software delays.
-F_CPU = 16000000
-
-#
-# LUFA specific
-#
-# Target architecture (see library "Board Types" documentation).
-ARCH = AVR8
-
-# Input clock frequency.
-# This will define a symbol, F_USB, in all source code files equal to the
-# input clock frequency (before any prescaling is performed) in Hz. This value may
-# differ from F_CPU if prescaling is used on the latter, and is required as the
-# raw input clock is fed directly to the PLL sections of the AVR for high speed
-# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
-# at the end, this will be done automatically to create a 32-bit value in your
-# source code.
-#
-# If no clock division is performed on the input clock inside the AVR (via the
-# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
-F_USB = $(F_CPU)
-
-# Interrupt driven control endpoint task(+60)
-OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
-
# Bootloader selection
# Teensy halfkay
# Pro Micro caterina
# Atmel DFU atmel-dfu
# LUFA DFU lufa-dfu
# QMK DFU qmk-dfu
-# atmega32a bootloadHID
+# ATmega32A bootloadHID
+# ATmega328P USBasp
BOOTLOADER = atmel-dfu
-
# Build Options
# comment out to disable the options.
#
diff --git a/keyboards/yd68/rules.mk b/keyboards/yd68/rules.mk
index 2a18c0015d..420ab38bf5 100644
--- a/keyboards/yd68/rules.mk
+++ b/keyboards/yd68/rules.mk
@@ -1,63 +1,16 @@
# MCU name
MCU = atmega32u4
-# Processor frequency.
-# This will define a symbol, F_CPU, in all source code files equal to the
-# processor frequency in Hz. You can then use this symbol in your source code to
-# calculate timings. Do NOT tack on a 'UL' at the end, this will be done
-# automatically to create a 32-bit value in your source code.
-#
-# This will be an integer division of F_USB below, as it is sourced by
-# F_USB after it has run through any CPU prescalers. Note that this value
-# does not *change* the processor frequency - it should merely be updated to
-# reflect the processor speed set externally so that the code can use accurate
-# software delays.
-F_CPU = 16000000
-
-
-#
-# LUFA specific
-#
-# Target architecture (see library "Board Types" documentation).
-ARCH = AVR8
-
-# Input clock frequency.
-# This will define a symbol, F_USB, in all source code files equal to the
-# input clock frequency (before any prescaling is performed) in Hz. This value may
-# differ from F_CPU if prescaling is used on the latter, and is required as the
-# raw input clock is fed directly to the PLL sections of the AVR for high speed
-# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
-# at the end, this will be done automatically to create a 32-bit value in your
-# source code.
-#
-# If no clock division is performed on the input clock inside the AVR (via the
-# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
-F_USB = $(F_CPU)
-
-# Interrupt driven control endpoint task(+60)
-OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
-
-
# Bootloader selection
# Teensy halfkay
# Pro Micro caterina
# Atmel DFU atmel-dfu
# LUFA DFU lufa-dfu
# QMK DFU qmk-dfu
-# atmega32a bootloadHID
+# ATmega32A bootloadHID
+# ATmega328P USBasp
BOOTLOADER = atmel-dfu
-
-# If you don't know the bootloader type, then you can specify the
-# Boot Section Size in *bytes* by uncommenting out the OPT_DEFS line
-# Teensy halfKay 512
-# Teensy++ halfKay 1024
-# Atmel DFU loader 4096
-# LUFA bootloader 4096
-# USBaspLoader 2048
-# OPT_DEFS += -DBOOTLOADER_SIZE=4096
-
-
# Build Options
# change yes to no to disable
#
diff --git a/keyboards/yosino58/keymaps/default/rules.mk b/keyboards/yosino58/keymaps/default/rules.mk
index 131f5e1f8a..88c202edb0 100644
--- a/keyboards/yosino58/keymaps/default/rules.mk
+++ b/keyboards/yosino58/keymaps/default/rules.mk
@@ -1,23 +1,5 @@
-# Build Options
-# change to "no" to disable the options, or define them in the Makefile in
-# the appropriate keymap folder that will get included automatically
-#
-BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration(+1000)
-MOUSEKEY_ENABLE = no # Mouse keys(+4700)
-EXTRAKEY_ENABLE = yes # Audio control and System control(+450)
-CONSOLE_ENABLE = no # Console for debug(+400)
-COMMAND_ENABLE = no # Commands for debug and configuration
-NKRO_ENABLE = no # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
-BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality
-MIDI_ENABLE = no # MIDI controls
-AUDIO_ENABLE = no # Audio output on port C6
-UNICODE_ENABLE = no # Unicode
-BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID
-RGBLIGHT_ENABLE = yes # Enable WS2812 RGB underlight.
-SWAP_HANDS_ENABLE = no # Enable one-hand typing
-
-# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
-SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend
+EXTRAKEY_ENABLE = yes
+RGBLIGHT_ENABLE = yes
# If you want to change the display of OLED, you need to change here
SRC += ./lib/glcdfont.c \
diff --git a/keyboards/yosino58/rules.mk b/keyboards/yosino58/rules.mk
index 25f135a8e8..5d3885fb2f 100644
--- a/keyboards/yosino58/rules.mk
+++ b/keyboards/yosino58/rules.mk
@@ -1,54 +1,16 @@
-SRC += i2c.c
-SRC += serial.c
-SRC += ssd1306.c
-
-# if firmware size over limit, try this option
-# CFLAGS += -flto
-
# MCU name
MCU = atmega32u4
-# Processor frequency.
-# This will define a symbol, F_CPU, in all source code files equal to the
-# processor frequency in Hz. You can then use this symbol in your source code to
-# calculate timings. Do NOT tack on a 'UL' at the end, this will be done
-# automatically to create a 32-bit value in your source code.
-#
-# This will be an integer division of F_USB below, as it is sourced by
-# F_USB after it has run through any CPU prescalers. Note that this value
-# does not *change* the processor frequency - it should merely be updated to
-# reflect the processor speed set externally so that the code can use accurate
-# software delays.
-F_CPU = 16000000
-
-#
-# LUFA specific
-#
-# Target architecture (see library "Board Types" documentation).
-ARCH = AVR8
-
-# Input clock frequency.
-# This will define a symbol, F_USB, in all source code files equal to the
-# input clock frequency (before any prescaling is performed) in Hz. This value may
-# differ from F_CPU if prescaling is used on the latter, and is required as the
-# raw input clock is fed directly to the PLL sections of the AVR for high speed
-# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
-# at the end, this will be done automatically to create a 32-bit value in your
-# source code.
-#
-# If no clock division is performed on the input clock inside the AVR (via the
-# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
-F_USB = $(F_CPU)
-
-# Bootloader
-# This definition is optional, and if your keyboard supports multiple bootloaders of
-# different sizes, comment this out, and the correct address will be loaded
-# automatically (+60). See bootloader.mk for all options.
+# Bootloader selection
+# Teensy halfkay
+# Pro Micro caterina
+# Atmel DFU atmel-dfu
+# LUFA DFU lufa-dfu
+# QMK DFU qmk-dfu
+# ATmega32A bootloadHID
+# ATmega328P USBasp
BOOTLOADER = caterina
-# Interrupt driven control endpoint task(+60)
-OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
-
# Build Options
# change to "no" to disable the options, or define them in the Makefile in
# the appropriate keymap folder that will get included automatically
@@ -73,3 +35,7 @@ SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend
CUSTOM_MATRIX = yes
DEFAULT_FOLDER = yosino58/rev1
+
+SRC += i2c.c
+SRC += serial.c
+SRC += ssd1306.c
diff --git a/keyboards/zinc/keymaps/default/rules.mk b/keyboards/zinc/keymaps/default/rules.mk
index 2dcefc0016..d2bc96e3af 100644
--- a/keyboards/zinc/keymaps/default/rules.mk
+++ b/keyboards/zinc/keymaps/default/rules.mk
@@ -1,4 +1,3 @@
-
# Build Options
# change to "no" to disable the options, or define them in the Makefile in
# the appropriate keymap folder that will get included automatically
diff --git a/keyboards/zinc/rules.mk b/keyboards/zinc/rules.mk
index 7574af387c..d9d840c2d0 100644
--- a/keyboards/zinc/rules.mk
+++ b/keyboards/zinc/rules.mk
@@ -1,50 +1,16 @@
-#SRC += i2c.c
-SRC += serial.c
-
# MCU name
MCU = atmega32u4
-# Processor frequency.
-# This will define a symbol, F_CPU, in all source code files equal to the
-# processor frequency in Hz. You can then use this symbol in your source code to
-# calculate timings. Do NOT tack on a 'UL' at the end, this will be done
-# automatically to create a 32-bit value in your source code.
-#
-# This will be an integer division of F_USB below, as it is sourced by
-# F_USB after it has run through any CPU prescalers. Note that this value
-# does not *change* the processor frequency - it should merely be updated to
-# reflect the processor speed set externally so that the code can use accurate
-# software delays.
-F_CPU = 16000000
-
-#
-# LUFA specific
-#
-# Target architecture (see library "Board Types" documentation).
-ARCH = AVR8
-
-# Input clock frequency.
-# This will define a symbol, F_USB, in all source code files equal to the
-# input clock frequency (before any prescaling is performed) in Hz. This value may
-# differ from F_CPU if prescaling is used on the latter, and is required as the
-# raw input clock is fed directly to the PLL sections of the AVR for high speed
-# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
-# at the end, this will be done automatically to create a 32-bit value in your
-# source code.
-#
-# If no clock division is performed on the input clock inside the AVR (via the
-# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
-F_USB = $(F_CPU)
-
-# Bootloader
-# This definition is optional, and if your keyboard supports multiple bootloaders of
-# different sizes, comment this out, and the correct address will be loaded
-# automatically (+60). See bootloader.mk for all options.
+# Bootloader selection
+# Teensy halfkay
+# Pro Micro caterina
+# Atmel DFU atmel-dfu
+# LUFA DFU lufa-dfu
+# QMK DFU qmk-dfu
+# ATmega32A bootloadHID
+# ATmega328P USBasp
BOOTLOADER = caterina
-# Interrupt driven control endpoint task(+60)
-OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
-
# Build Options
# change to "no" to disable the options, or define them in the Makefile in
# the appropriate keymap folder that will get included automatically
@@ -69,3 +35,6 @@ SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend
CUSTOM_MATRIX = yes
DEFAULT_FOLDER = zinc/rev1
+
+#SRC += i2c.c
+SRC += serial.c
diff --git a/keyboards/zj68/rules.mk b/keyboards/zj68/rules.mk
index 79860ed7a2..648553cc41 100644
--- a/keyboards/zj68/rules.mk
+++ b/keyboards/zj68/rules.mk
@@ -1,48 +1,14 @@
# MCU name
MCU = atmega32u4
-# Processor frequency.
-# This will define a symbol, F_CPU, in all source code files equal to the
-# processor frequency in Hz. You can then use this symbol in your source code to
-# calculate timings. Do NOT tack on a 'UL' at the end, this will be done
-# automatically to create a 32-bit value in your source code.
-#
-# This will be an integer division of F_USB below, as it is sourced by
-# F_USB after it has run through any CPU prescalers. Note that this value
-# does not *change* the processor frequency - it should merely be updated to
-# reflect the processor speed set externally so that the code can use accurate
-# software delays.
-F_CPU = 16000000
-
-#
-# LUFA specific
-#
-# Target architecture (see library "Board Types" documentation).
-ARCH = AVR8
-
-# Input clock frequency.
-# This will define a symbol, F_USB, in all source code files equal to the
-# input clock frequency (before any prescaling is performed) in Hz. This value may
-# differ from F_CPU if prescaling is used on the latter, and is required as the
-# raw input clock is fed directly to the PLL sections of the AVR for high speed
-# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
-# at the end, this will be done automatically to create a 32-bit value in your
-# source code.
-#
-# If no clock division is performed on the input clock inside the AVR (via the
-# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
-F_USB = $(F_CPU)
-
-# Interrupt driven control endpoint task(+60)
-OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
-
# Bootloader selection
# Teensy halfkay
# Pro Micro caterina
# Atmel DFU atmel-dfu
# LUFA DFU lufa-dfu
# QMK DFU qmk-dfu
-# atmega32a bootloadHID
+# ATmega32A bootloadHID
+# ATmega328P USBasp
BOOTLOADER = atmel-dfu
# Build Options
diff --git a/keyboards/zlant/rules.mk b/keyboards/zlant/rules.mk
index 0bc5c8aaed..82bc13c60e 100755
--- a/keyboards/zlant/rules.mk
+++ b/keyboards/zlant/rules.mk
@@ -1,45 +1,15 @@
# MCU name
MCU = atmega32u4
-# Processor frequency.
-# This will define a symbol, F_CPU, in all source code files equal to the
-# processor frequency in Hz. You can then use this symbol in your source code to
-# calculate timings. Do NOT tack on a 'UL' at the end, this will be done
-# automatically to create a 32-bit value in your source code.
-#
-# This will be an integer division of F_USB below, as it is sourced by
-# F_USB after it has run through any CPU prescalers. Note that this value
-# does not *change* the processor frequency - it should merely be updated to
-# reflect the processor speed set externally so that the code can use accurate
-# software delays.
-F_CPU = 16000000
-
-#
-# LUFA specific
-#
-# Target architecture (see library "Board Types" documentation).
-ARCH = AVR8
-
-# Input clock frequency.
-# This will define a symbol, F_USB, in all source code files equal to the
-# input clock frequency (before any prescaling is performed) in Hz. This value may
-# differ from F_CPU if prescaling is used on the latter, and is required as the
-# raw input clock is fed directly to the PLL sections of the AVR for high speed
-# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
-# at the end, this will be done automatically to create a 32-bit value in your
-# source code.
-#
-# If no clock division is performed on the input clock inside the AVR (via the
-# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
-F_USB = $(F_CPU)
-
-# Interrupt driven control endpoint task(+60)
-OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
-
-
-# Boot Section Size in *bytes*
-OPT_DEFS += -DBOOTLOADER_SIZE=4096
-
+# Bootloader selection
+# Teensy halfkay
+# Pro Micro caterina
+# Atmel DFU atmel-dfu
+# LUFA DFU lufa-dfu
+# QMK DFU qmk-dfu
+# ATmega32A bootloadHID
+# ATmega328P USBasp
+BOOTLOADER = atmel-dfu
# Build Options
# comment out to disable the options.