diff options
3455 files changed, 11460 insertions, 17189 deletions
diff --git a/builddefs/build_keyboard.mk b/builddefs/build_keyboard.mk index 0425d3fc9d..72c990abbb 100644 --- a/builddefs/build_keyboard.mk +++ b/builddefs/build_keyboard.mk @@ -27,7 +27,6 @@ QMK_BIN ?= qmk # Set the filename for the final firmware binary KEYBOARD_FILESAFE := $(subst /,_,$(KEYBOARD)) TARGET ?= $(KEYBOARD_FILESAFE)_$(KEYMAP) -KEYBOARD_OUTPUT := $(BUILD_DIR)/obj_$(KEYBOARD_FILESAFE) ifeq ($(strip $(DUMP_CI_METADATA)),yes) $(info CI Metadata: KEYBOARD=$(KEYBOARD)) @@ -44,7 +43,7 @@ endif # Object files and generated keymap directory # To put object files in current directory, use a dot (.), do NOT make # this an empty or blank macro! -KEYMAP_OUTPUT := $(BUILD_DIR)/obj_$(TARGET) +INTERMEDIATE_OUTPUT := $(BUILD_DIR)/obj_$(TARGET) ifdef SKIP_VERSION OPT_DEFS += -DSKIP_VERSION @@ -60,7 +59,7 @@ VERSION_H_FLAGS += --skip-git endif # Generate the board's version.h file. -$(shell $(QMK_BIN) generate-version-h $(VERSION_H_FLAGS) -q -o $(KEYMAP_OUTPUT)/src/version.h) +$(shell $(QMK_BIN) generate-version-h $(VERSION_H_FLAGS) -q -o $(INTERMEDIATE_OUTPUT)/src/version.h) # Determine which subfolders exist. KEYBOARD_FOLDER_PATH_1 := $(KEYBOARD) @@ -121,7 +120,7 @@ MAIN_KEYMAP_PATH_4 := $(KEYBOARD_PATH_4)/keymaps/$(KEYMAP) MAIN_KEYMAP_PATH_5 := $(KEYBOARD_PATH_5)/keymaps/$(KEYMAP) # Pull in rules from info.json -INFO_RULES_MK = $(shell $(QMK_BIN) generate-rules-mk --quiet --escape --keyboard $(KEYBOARD) --output $(KEYBOARD_OUTPUT)/src/info_rules.mk) +INFO_RULES_MK = $(shell $(QMK_BIN) generate-rules-mk --quiet --escape --keyboard $(KEYBOARD) --output $(INTERMEDIATE_OUTPUT)/src/info_rules.mk) include $(INFO_RULES_MK) # Check for keymap.json first, so we can regenerate keymap.c @@ -161,28 +160,28 @@ endif # Have we found a keymap.json? ifneq ("$(wildcard $(KEYMAP_JSON))", "") - KEYMAP_C := $(KEYMAP_OUTPUT)/src/keymap.c - KEYMAP_H := $(KEYMAP_OUTPUT)/src/config.h + KEYMAP_C := $(INTERMEDIATE_OUTPUT)/src/keymap.c + KEYMAP_H := $(INTERMEDIATE_OUTPUT)/src/config.h # Load the keymap-level rules.mk if exists -include $(KEYMAP_PATH)/rules.mk # Load any rules.mk content from keymap.json - INFO_RULES_MK = $(shell $(QMK_BIN) generate-rules-mk --quiet --escape --output $(KEYMAP_OUTPUT)/src/rules.mk $(KEYMAP_JSON)) + INFO_RULES_MK = $(shell $(QMK_BIN) generate-rules-mk --quiet --escape --output $(INTERMEDIATE_OUTPUT)/src/rules.mk $(KEYMAP_JSON)) include $(INFO_RULES_MK) # Add rules to generate the keymap files - indentation here is important -$(KEYMAP_OUTPUT)/src/keymap.c: $(KEYMAP_JSON) +$(INTERMEDIATE_OUTPUT)/src/keymap.c: $(KEYMAP_JSON) @$(SILENT) || printf "$(MSG_GENERATING) $@" | $(AWK_CMD) $(eval CMD=$(QMK_BIN) json2c --quiet --output $(KEYMAP_C) $(KEYMAP_JSON)) @$(BUILD_CMD) -$(KEYMAP_OUTPUT)/src/config.h: $(KEYMAP_JSON) +$(INTERMEDIATE_OUTPUT)/src/config.h: $(KEYMAP_JSON) @$(SILENT) || printf "$(MSG_GENERATING) $@" | $(AWK_CMD) $(eval CMD=$(QMK_BIN) generate-config-h --quiet --output $(KEYMAP_H) $(KEYMAP_JSON)) @$(BUILD_CMD) -generated-files: $(KEYMAP_OUTPUT)/src/config.h $(KEYMAP_OUTPUT)/src/keymap.c +generated-files: $(INTERMEDIATE_OUTPUT)/src/config.h $(INTERMEDIATE_OUTPUT)/src/keymap.c endif @@ -323,34 +322,34 @@ ifneq ("$(wildcard $(KEYBOARD_PATH_5)/info.json)","") INFO_JSON_FILES += $(KEYBOARD_PATH_5)/info.json endif -CONFIG_H += $(KEYBOARD_OUTPUT)/src/info_config.h -KEYBOARD_SRC += $(KEYBOARD_OUTPUT)/src/default_keyboard.c +CONFIG_H += $(INTERMEDIATE_OUTPUT)/src/info_config.h +KEYBOARD_SRC += $(INTERMEDIATE_OUTPUT)/src/default_keyboard.c -$(KEYBOARD_OUTPUT)/src/info_config.h: $(INFO_JSON_FILES) +$(INTERMEDIATE_OUTPUT)/src/info_config.h: $(INFO_JSON_FILES) @$(SILENT) || printf "$(MSG_GENERATING) $@" | $(AWK_CMD) - $(eval CMD=$(QMK_BIN) generate-config-h --quiet --keyboard $(KEYBOARD) --output $(KEYBOARD_OUTPUT)/src/info_config.h) + $(eval CMD=$(QMK_BIN) generate-config-h --quiet --keyboard $(KEYBOARD) --output $(INTERMEDIATE_OUTPUT)/src/info_config.h) @$(BUILD_CMD) -$(KEYBOARD_OUTPUT)/src/default_keyboard.c: $(INFO_JSON_FILES) +$(INTERMEDIATE_OUTPUT)/src/default_keyboard.c: $(INFO_JSON_FILES) @$(SILENT) || printf "$(MSG_GENERATING) $@" | $(AWK_CMD) - $(eval CMD=$(QMK_BIN) generate-keyboard-c --quiet --keyboard $(KEYBOARD) --output $(KEYBOARD_OUTPUT)/src/default_keyboard.c) + $(eval CMD=$(QMK_BIN) generate-keyboard-c --quiet --keyboard $(KEYBOARD) --output $(INTERMEDIATE_OUTPUT)/src/default_keyboard.c) @$(BUILD_CMD) -$(KEYBOARD_OUTPUT)/src/default_keyboard.h: $(INFO_JSON_FILES) +$(INTERMEDIATE_OUTPUT)/src/default_keyboard.h: $(INFO_JSON_FILES) @$(SILENT) || printf "$(MSG_GENERATING) $@" | $(AWK_CMD) - $(eval CMD=$(QMK_BIN) generate-keyboard-h --quiet --keyboard $(KEYBOARD) --include $(FOUND_KEYBOARD_H) --output $(KEYBOARD_OUTPUT)/src/default_keyboard.h) + $(eval CMD=$(QMK_BIN) generate-keyboard-h --quiet --keyboard $(KEYBOARD) --include $(FOUND_KEYBOARD_H) --output $(INTERMEDIATE_OUTPUT)/src/default_keyboard.h) @$(BUILD_CMD) -generated-files: $(KEYBOARD_OUTPUT)/src/info_config.h $(KEYBOARD_OUTPUT)/src/default_keyboard.c $(KEYBOARD_OUTPUT)/src/default_keyboard.h +generated-files: $(INTERMEDIATE_OUTPUT)/src/info_config.h $(INTERMEDIATE_OUTPUT)/src/default_keyboard.c $(INTERMEDIATE_OUTPUT)/src/default_keyboard.h -generated-files: $(KEYMAP_OUTPUT)/src/info_deps.d +generated-files: $(INTERMEDIATE_OUTPUT)/src/info_deps.d -$(KEYMAP_OUTPUT)/src/info_deps.d: +$(INTERMEDIATE_OUTPUT)/src/info_deps.d: @$(SILENT) || printf "$(MSG_GENERATING) $@" | $(AWK_CMD) - $(eval CMD=$(QMK_BIN) generate-make-dependencies -kb $(KEYBOARD) -km $(KEYMAP) -o $(KEYMAP_OUTPUT)/src/info_deps.d) + $(eval CMD=$(QMK_BIN) generate-make-dependencies -kb $(KEYBOARD) -km $(KEYMAP) -o $(INTERMEDIATE_OUTPUT)/src/info_deps.d) @$(BUILD_CMD) --include $(KEYMAP_OUTPUT)/src/info_deps.d +-include $(INTERMEDIATE_OUTPUT)/src/info_deps.d .INTERMEDIATE : generated-files @@ -423,8 +422,7 @@ VPATH += $(KEYMAP_PATH) VPATH += $(USER_PATH) VPATH += $(KEYBOARD_PATHS) VPATH += $(COMMON_VPATH) -VPATH += $(KEYBOARD_OUTPUT)/src -VPATH += $(KEYMAP_OUTPUT)/src +VPATH += $(INTERMEDIATE_OUTPUT)/src include $(BUILDDEFS_PATH)/common_features.mk include $(BUILDDEFS_PATH)/generic_features.mk @@ -442,10 +440,11 @@ include $(PLATFORM_PATH)/$(PLATFORM_KEY)/platform.mk -include $(PLATFORM_PATH)/$(PLATFORM_KEY)/flash.mk ifneq ($(strip $(PROTOCOL)),) - include $(TMK_PATH)/protocol/$(strip $(shell echo $(PROTOCOL) | tr '[:upper:]' '[:lower:]')).mk +PROTOCOL_KEY = $(strip $(shell echo $(PROTOCOL) | tr '[:upper:]' '[:lower:]')) else - include $(TMK_PATH)/protocol/$(PLATFORM_KEY).mk +PROTOCOL_KEY = $(PLATFORM_KEY) endif +include $(TMK_PATH)/protocol/$(PROTOCOL_KEY)/$(PROTOCOL_KEY).mk # Setup definitions based on the selected MCU $(eval $(call add_qmk_prefix_defs,MCU_ORIG,MCU)) @@ -471,17 +470,14 @@ PROJECT_CONFIG := $(CONFIG_H) CONFIG_H += $(POST_CONFIG_H) ALL_CONFIGS := $(PROJECT_CONFIG) $(CONFIG_H) -OUTPUTS := $(KEYMAP_OUTPUT) $(KEYBOARD_OUTPUT) -$(KEYMAP_OUTPUT)_SRC := $(SRC) -$(KEYMAP_OUTPUT)_DEFS := $(OPT_DEFS) \ --DQMK_KEYBOARD=\"$(KEYBOARD)\" -DQMK_KEYBOARD_H=\"$(KEYBOARD_OUTPUT)/src/default_keyboard.h\" \ --DQMK_KEYMAP=\"$(KEYMAP)\" -DQMK_KEYMAP_H=\"$(KEYMAP).h\" -DQMK_KEYMAP_CONFIG_H=\"$(KEYMAP_PATH)/config.h\" -$(KEYMAP_OUTPUT)_INC := $(VPATH) $(EXTRAINCDIRS) -$(KEYMAP_OUTPUT)_CONFIG := $(CONFIG_H) -$(KEYBOARD_OUTPUT)_SRC := $(PLATFORM_SRC) -$(KEYBOARD_OUTPUT)_DEFS := $(PROJECT_DEFS) -$(KEYBOARD_OUTPUT)_INC := $(PROJECT_INC) -$(KEYBOARD_OUTPUT)_CONFIG := $(PROJECT_CONFIG) +OUTPUTS := $(INTERMEDIATE_OUTPUT) +$(INTERMEDIATE_OUTPUT)_SRC := $(SRC) $(PLATFORM_SRC) +$(INTERMEDIATE_OUTPUT)_DEFS := $(OPT_DEFS) \ + -DQMK_KEYBOARD=\"$(KEYBOARD)\" -DQMK_KEYBOARD_H=\"$(INTERMEDIATE_OUTPUT)/src/default_keyboard.h\" \ + -DQMK_KEYMAP=\"$(KEYMAP)\" -DQMK_KEYMAP_H=\"$(KEYMAP).h\" -DQMK_KEYMAP_CONFIG_H=\"$(KEYMAP_PATH)/config.h\" \ + $(PROJECT_DEFS) +$(INTERMEDIATE_OUTPUT)_INC := $(VPATH) $(EXTRAINCDIRS) $(PROJECT_INC) +$(INTERMEDIATE_OUTPUT)_CONFIG := $(CONFIG_H) $(PROJECT_CONFIG) # Default target. all: build check-size diff --git a/builddefs/common_rules.mk b/builddefs/common_rules.mk index 816eac49ae..5d635307ed 100644 --- a/builddefs/common_rules.mk +++ b/builddefs/common_rules.mk @@ -176,7 +176,7 @@ MOVE_DEP = mv -f $(patsubst %.o,%.td,$@) $(patsubst %.o,%.d,$@) # For a ChibiOS build, ensure that the board files have the hook overrides injected define BOARDSRC_INJECT_HOOKS -$(KEYBOARD_OUTPUT)/$(patsubst %.c,%.o,$(patsubst ./%,%,$1)): INIT_HOOK_CFLAGS += -include $(TOP_DIR)/tmk_core/protocol/chibios/init_hooks.h +$(INTERMEDIATE_OUTPUT)/$(patsubst %.c,%.o,$(patsubst ./%,%,$1)): INIT_HOOK_CFLAGS += -include $(TOP_DIR)/tmk_core/protocol/chibios/init_hooks.h endef $(foreach LOBJ, $(BOARDSRC), $(eval $(call BOARDSRC_INJECT_HOOKS,$(LOBJ)))) diff --git a/data/mappings/info_config.hjson b/data/mappings/info_config.hjson index e53d90da39..56d6216c42 100644 --- a/data/mappings/info_config.hjson +++ b/data/mappings/info_config.hjson @@ -117,6 +117,7 @@ "RGBLIGHT_LAYER_BLINK": {"info_key": "rgblight.layers.blink", "value_type": "bool"}, "RGBLIGHT_LAYERS": {"info_key": "rgblight.layers.enabled", "value_type": "bool"}, "RGBLIGHT_LAYERS_OVERRIDE_RGB_OFF": {"info_key": "rgblight.layers.override_rgb", "value_type": "bool"}, + "RGBLIGHT_LED_MAP": {"info_key": "rgblight.led_map", "value_type": "array.int"}, "RGBLIGHT_LIMIT_VAL": {"info_key": "rgblight.max_brightness", "value_type": "int"}, "RGBLIGHT_MAX_LAYERS": {"info_key": "rgblight.layers.max", "value_type": "int"}, "RGBLIGHT_SAT_STEP": {"info_key": "rgblight.saturation_steps", "value_type": "int"}, diff --git a/data/mappings/keyboard_aliases.hjson b/data/mappings/keyboard_aliases.hjson index a656288a8f..6cf1e206e2 100644 --- a/data/mappings/keyboard_aliases.hjson +++ b/data/mappings/keyboard_aliases.hjson @@ -868,6 +868,9 @@ "hecomi/alpha": { "target": "takashiski/hecomi/alpha" }, + "hfdkb/keyboard_sw/k83":{ + "target": "inland/kb83" + }, "hid_liber": { "target": "bpiphany/hid_liber" }, diff --git a/data/schemas/keyboard.jsonschema b/data/schemas/keyboard.jsonschema index ba4a7eec55..2051a7b8ba 100644 --- a/data/schemas/keyboard.jsonschema +++ b/data/schemas/keyboard.jsonschema @@ -71,6 +71,8 @@ "STM32F446", "STM32G431", "STM32G474", + "STM32H723", + "STM32H733", "STM32L412", "STM32L422", "STM32L432", @@ -491,6 +493,11 @@ } }, "led_count": {"$ref": "qmk.definitions.v1#/unsigned_int"}, + "led_map": { + "type": "array", + "minItems": 2, + "items": {"$ref": "qmk.definitions.v1#/unsigned_int"} + }, "max_brightness": {"$ref": "qmk.definitions.v1#/unsigned_int_8"}, "pin": { "$ref": "qmk.definitions.v1#/mcu_pin", diff --git a/docs/breaking_changes.md b/docs/breaking_changes.md index e660182c32..f4560b746f 100644 --- a/docs/breaking_changes.md +++ b/docs/breaking_changes.md @@ -119,6 +119,7 @@ This happens immediately after the previous `develop` branch is merged to `maste * `git commit -m 'Branch point for <DATE> Breaking Change'` * `git tag breakpoint_<YYYY>_<MM>_<DD>` * `git push upstream breakpoint_<YYYY>_<MM>_<DD>` + * `git push upstream develop` * All submodules under `lib` now need to be checked against their QMK-based forks: * `git submodule foreach git log -n1` diff --git a/docs/compatible_microcontrollers.md b/docs/compatible_microcontrollers.md index cc9c0b7f92..197033f78b 100644 --- a/docs/compatible_microcontrollers.md +++ b/docs/compatible_microcontrollers.md @@ -43,6 +43,8 @@ You can also use any ARM chip with USB that [ChibiOS](https://www.chibios.org) s * [STM32F446](https://www.st.com/en/microcontrollers-microprocessors/stm32f446.html) * [STM32G431](https://www.st.com/en/microcontrollers-microprocessors/stm32g4x1.html) * [STM32G474](https://www.st.com/en/microcontrollers-microprocessors/stm32g4x4.html) + * [STM32H723](https://www.st.com/en/microcontrollers-microprocessors/stm32h723-733.html) + * [STM32H733](https://www.st.com/en/microcontrollers-microprocessors/stm32h723-733.html) * [STM32L412](https://www.st.com/en/microcontrollers-microprocessors/stm32l4x2.html) * [STM32L422](https://www.st.com/en/microcontrollers-microprocessors/stm32l4x2.html) * [STM32L432](https://www.st.com/en/microcontrollers-microprocessors/stm32l4x2.html) diff --git a/docs/data_driven_config.md b/docs/data_driven_config.md index ba287f5688..b288f9901a 100644 --- a/docs/data_driven_config.md +++ b/docs/data_driven_config.md @@ -79,8 +79,8 @@ If you are not sure how to edit this file or are not comfortable with Python [op The final piece of the puzzle is providing your new option to the build system. This is done by generating two files: -* `.build/obj_<keyboard>/src/info_config.h` -* `.build/obj_<keyboard>/src/rules.mk` +* `.build/obj_<keyboard>_<keymap>/src/info_config.h` +* `.build/obj_<keyboard>_<keymap>/src/rules.mk` These two files are generated by the code here: diff --git a/docs/feature_auto_shift.md b/docs/feature_auto_shift.md index 1719807e26..6241cbaeb1 100644 --- a/docs/feature_auto_shift.md +++ b/docs/feature_auto_shift.md @@ -133,7 +133,17 @@ groups in the below fallback switch. ### NO_AUTO_SHIFT_SPECIAL (simple define) Do not Auto Shift special keys, which include -\_, =+, [{, ]}, ;:, '", ,<, .>, -and /? +/?, and the KC_TAB. + +### NO_AUTO_SHIFT_TAB (simple define) + +Do not Auto Shift KC_TAB but leave Auto Shift enabled for the other special +characters. + +### NO_AUTO_SHIFT_SYMBOLS (simple define) + +Do not Auto Shift symbol keys, which include -\_, =+, [{, ]}, ;:, '", ,<, .>, +and /?. ### NO_AUTO_SHIFT_NUMERIC (simple define) @@ -143,9 +153,13 @@ Do not Auto Shift numeric keys, zero through nine. Do not Auto Shift alpha characters, which include A through Z. +### AUTO_SHIFT_ENTER (simple define) + +Auto Shift the enter key. + ### Auto Shift Per Key -There are functions that allows you to determine which keys shold be autoshifted, much like the tap-hold keys. +There are functions that allows you to determine which keys should be autoshifted, much like the tap-hold keys. The first of these, used to simply add a key to Auto Shift, is `get_custom_auto_shifted_key`: @@ -172,9 +186,15 @@ bool get_auto_shifted_key(uint16_t keycode, keyrecord_t *record) { case KC_1 ... KC_0: # endif # ifndef NO_AUTO_SHIFT_SPECIAL +# ifndef NO_AUTO_SHIFT_TAB case KC_TAB: - case KC_MINUS ... KC_SLASH: - case KC_NONUS_BACKSLASH: +# endif +# ifndef NO_AUTO_SHIFT_SYMBOLS + case AUTO_SHIFT_SYMBOLS: +# endif +# endif +# ifdef AUTO_SHIFT_ENTER + case KC_ENT: # endif return true; } @@ -192,6 +212,25 @@ Enables keyrepeat. Disables automatically keyrepeating when `AUTO_SHIFT_TIMEOUT` is exceeded. + +### AUTO_SHIFT_ALPHA (predefined key group) + +A predefined group of keys representing A through Z. + +### AUTO_SHIFT_NUMERIC (predefined key group) + +A predefined group of keys representing 0 through 9. Note, these are defined as +1 through 0 since that is the order they normally appear in. + +### AUTO_SHIFT_SYMBOLS (predefined key group) + +A predefined group of keys representing symbolic characters which include -\_, =+, [{, ]}, ;:, '", ,<, .>, +and /?. + +### AUTO_SHIFT_SPECIAL (predefined key group) + +A predefined group of keys that combines AUTO_SHIFT_SYMBOLS and KC_TAB. + ## Custom Shifted Values Especially on small keyboards, the default shifted value for many keys is not diff --git a/docs/feature_hd44780.md b/docs/feature_hd44780.md index 4ade640baa..dcbd656bbe 100644 --- a/docs/feature_hd44780.md +++ b/docs/feature_hd44780.md @@ -1,6 +1,6 @@ -# HD44780 LCD Driver +# HD44780 LCD Driver :id=hd44780-lcd-driver -## Supported Hardware +## Supported Hardware :id=supported-hardware LCD modules using [HD44780U](https://www.sparkfun.com/datasheets/LCD/HD44780.pdf) IC or equivalent, communicating in 4-bit mode. @@ -11,7 +11,7 @@ LCD modules using [HD44780U](https://www.sparkfun.com/datasheets/LCD/HD44780.pdf To run these modules at 3.3V, an additional MAX660 voltage converter IC must be soldered on, along with two 10µF capacitors. See [this page](https://www.codrey.com/electronic-circuits/hack-your-16x2-lcd/) for more details. -## Usage +## Usage :id=usage Add the following to your `rules.mk`: @@ -19,7 +19,7 @@ Add the following to your `rules.mk`: HD44780_ENABLE = yes ``` -## Basic Configuration +## Basic Configuration :id=basic-configuration Add the following to your `config.h`: @@ -33,9 +33,9 @@ Add the following to your `config.h`: |`HD44780_DISPLAY_LINES`|`2` |The number of visible lines on the display | |`HD44780_WRAP_LINES` |*Not defined* |If defined, input characters will wrap to the next line | -## Examples +## Examples :id=examples -### Hello World +### Hello World :id=example-hello-world Add the following to your `keymap.c`: @@ -46,7 +46,7 @@ void keyboard_post_init_user(void) { } ``` -### Custom Character Definition +### Custom Character Definition :id=example-custom-character Up to eight custom characters can be defined. This data is stored in the Character Generator RAM (CGRAM), and is not persistent across power cycles. @@ -77,15 +77,15 @@ void keyboard_post_init_user(void) { } ``` -## API +## API :id=api -### `void hd44780_init(bool cursor, bool blink)` +### `void hd44780_init(bool cursor, bool blink)` :id=api-hd44780-init Initialize the display. This function should be called only once, before any of the other functions can be called. -#### Arguments +#### Arguments :id=api-hd44780-init-arguments - `bool cursor` Whether to show the cursor. @@ -94,7 +94,7 @@ This function should be called only once, before any of the other functions can --- -### `void hd44780_clear(void)` +### `void hd44780_clear(void)` :id=api-hd44780-clear Clear the display. @@ -102,7 +102,7 @@ This function is called on init. --- -### `void hd44780_home(void)` +### `void hd44780_home(void)` :id=api-hd44780-home Move the cursor to the home position. @@ -110,13 +110,13 @@ This function is called on init. --- -### `void hd44780_on(bool cursor, bool blink)` +### `void hd44780_on(bool cursor, bool blink)` :id=api-hd44780-on Turn the display on, and/or set the cursor properties. This function is called on init. -#### Arguments +#### Arguments :id=api-hd44780-on-arguments - `bool cursor` Whether to show the cursor. @@ -125,17 +125,17 @@ This function is called on init. --- -### `void hd44780_off(void)` +### `void hd44780_off(void)` :id=api-hd44780-off Turn the display off. --- -### `void hd44780_set_cursor(uint8_t col, uint8_t line)` +### `void hd44780_set_cursor(uint8_t col, uint8_t line)` :id=api-hd44780-set-cursor Move the cursor to the specified position on the display. -#### Arguments +#### Arguments :id=api-hd44780-set-cursor-arguments - `uint8_t col` The column number to move to, from 0 to 15 on 16x2 displays. @@ -144,48 +144,48 @@ Move the cursor to the specified position on the display. --- -### `void hd44780_putc(char c)` +### `void hd44780_putc(char c)` :id=api-hd44780-putc Print a character to the display. The newline character `\n` will move the cursor to the start of the next line. The exact character shown may depend on the ROM code of your particular display - refer to the datasheet for the full character set. -#### Arguments +#### Arguments :id=api-hd44780-putc-arguments - `char c` The character to print. --- -### `void hd44780_puts(const char *s)` +### `void hd44780_puts(const char *s)` :id=api-hd44780-puts Print a string of characters to the display. -#### Arguments +#### Arguments :id=api-hd44780-puts-arguments - `const char *s` The string to print. --- -### `void hd44780_puts_P(const char *s)` +### `void hd44780_puts_P(const char *s)` :id=api-hd44780-puts-p Print a string of characters from PROGMEM to the display. On ARM devices, this function is simply an alias of `hd44780_puts()`. -#### Arguments +#### Arguments :id=api-hd44780-puts-p-arguments - `const char *s` The PROGMEM string to print (ie. `PSTR("Hello")`). --- -### `void hd44780_define_char(uint8_t index, uint8_t *data)` +### `void hd44780_define_char(uint8_t index, uint8_t *data)` :id=api-hd44780-define-char Define a custom character. -#### Arguments +#### Arguments :id=api-hd44780-define-char-arguments - `uint8_t index` The index of the custom character to define, from 0 to 7. @@ -194,13 +194,13 @@ Define a custom character. --- -### `void hd44780_define_char_P(uint8_t index, const uint8_t *data)` +### `void hd44780_define_char_P(uint8_t index, const uint8_t *data)` :id=api-hd44780-define-char-p Define a custom character from PROGMEM. On ARM devices, this function is simply an alias of `hd44780_define_char()`. -#### Arguments +#### Arguments :id=api-hd44780-define-char-p-arguments - `uint8_t index` The index of the custom character to define, from 0 to 7. @@ -209,21 +209,21 @@ On ARM devices, this function is simply an alias of `hd44780_define_char()`. --- -### `bool hd44780_busy(void)` +### `bool hd44780_busy(void)` :id=api-hd44780-busy Indicates whether the display is currently processing, and cannot accept instructions. -#### Return Value +#### Return Value :id=api-hd44780-busy-arguments `true` if the display is busy. --- -### `void hd44780_write(uint8_t data, bool isData)` +### `void hd44780_write(uint8_t data, bool isData)` :id=api-hd44780-write Write a byte to the display. -#### Arguments +#### Arguments :id=api-hd44780-write-arguments - `uint8_t data` The byte to send to the display. @@ -232,67 +232,67 @@ Write a byte to the display. --- -### `uint8_t hd44780_read(bool isData)` +### `uint8_t hd44780_read(bool isData)` :id=api-hd44780-read Read a byte from the display. -#### Arguments +#### Arguments :id=api-hd44780-read-arguments - `bool isData` Whether to read the current cursor position, or the character at the cursor. -#### Return Value +#### Return Value :id=api-hd44780-read-return If `isData` is `true`, the returned byte will be the character at the current DDRAM address. Otherwise, it will be the current DDRAM address and the busy flag. --- -### `void hd44780_command(uint8_t command)` +### `void hd44780_command(uint8_t command)` :id=api-hd44780-command Send a command to the display. Refer to the datasheet and `hd44780.h` for the valid commands and defines. This function waits for the display to clear the busy flag before sending the command. -#### Arguments +#### Arguments :id=api-hd44780-command-arguments - `uint8_t command` The command to send. --- -### `void hd44780_data(uint8_t data)` +### `void hd44780_data(uint8_t data)` :id=api-hd44780-data Send a byte of data to the display. This function waits for the display to clear the busy flag before sending the data. -#### Arguments +#### Arguments :id=api-hd44780-data-arguments - `uint8_t data` The byte of data to send. --- -### `void hd44780_set_cgram_address(uint8_t address)` +### `void hd44780_set_cgram_address(uint8_t address)` :id=api-hd44780-set-cgram-address Set the CGRAM address. This function is used when defining custom characters. -#### Arguments +#### Arguments :id=api-hd44780-set-cgram-address-arguments - `uint8_t address` The CGRAM address to move to, from `0x00` to `0x3F`. --- -### `void hd44780_set_ddram_address(uint8_t address)` +### `void hd44780_set_ddram_address(uint8_t address)` :id=api-hd44780-set-ddram-address Set the DDRAM address. This function is used when printing characters to the display, and setting the cursor. -#### Arguments +#### Arguments :id=api-hd44780-set-ddram-address-arguments - `uint8_t address` The DDRAM address to move to, from `0x00` to `0x7F`. diff --git a/docs/feature_led_matrix.md b/docs/feature_led_matrix.md index bc86099f1f..b967f943d3 100644 --- a/docs/feature_led_matrix.md +++ b/docs/feature_led_matrix.md @@ -139,7 +139,7 @@ Currently only 4 drivers are supported, but it would be trivial to support for m Define these arrays listing all the LEDs in your `<keyboard>.c`: ```c -const is31_led __flash g_is31_leds[LED_MATRIX_LED_COUNT] = { +const is31_led PROGMEM g_is31_leds[LED_MATRIX_LED_COUNT] = { /* Refer to IS31 manual for these locations * driver * | LED address @@ -158,7 +158,7 @@ Eg `#define ISSI_MANUAL_SCALING 3` Then Define the array listing all the LEDs you want to override in your `<keyboard>.c`: ```c -const is31_led __flash g_is31_scaling[ISSI_MANUAL_SCALING] = { +const is31_led PROGMEM g_is31_scaling[ISSI_MANUAL_SCALING] = { * LED Index * | Scaling * | | */ diff --git a/docs/feature_rgb_matrix.md b/docs/feature_rgb_matrix.md index 75f07b5e64..89c9268ca4 100644 --- a/docs/feature_rgb_matrix.md +++ b/docs/feature_rgb_matrix.md @@ -386,7 +386,7 @@ Currently only 4 drivers are supported, but it would be trivial to support for m Define these arrays listing all the LEDs in your `<keyboard>.c`: ```c -const is31_led __flash g_is31_leds[RGB_MATRIX_LED_COUNT] = { +const is31_led PROGMEM g_is31_leds[RGB_MATRIX_LED_COUNT] = { /* Refer to IS31 manual for these locations * driver * | R location @@ -406,7 +406,7 @@ Eg `#define ISSI_MANUAL_SCALING 3` Then Define the array listing all the LEDs you want to override in your `<keyboard>.c`: ```c -const is31_led __flash g_is31_scaling[ISSI_MANUAL_SCALING] = { +const is31_led PROGMEM g_is31_scaling[ISSI_MANUAL_SCALING] = { * LED Index * | R scaling * | | G scaling diff --git a/docs/feature_rgblight.md b/docs/feature_rgblight.md index 5131658ae1..7deda1f8d5 100644 --- a/docs/feature_rgblight.md +++ b/docs/feature_rgblight.md @@ -524,37 +524,6 @@ By defining `RGBLIGHT_LED_MAP` as in the example below, you can specify the LED ``` <img src="https://user-images.githubusercontent.com/2170248/55743725-08ad7a80-5a6e-11e9-83ed-126a2b0209fc.JPG" alt="simple mapped" width="50%"/> -For keyboards that use the RGB LEDs as a backlight for each key, you can also define it as in the example below. - -```c -// config.h - -#define RGBLED_NUM 30 - -/* RGB LED Conversion macro from physical array to electric array */ -#define LED_LAYOUT( \ - L00, L01, L02, L03, L04, L05, \ - L10, L11, L12, L13, L14, L15, \ - L20, L21, L22, L23, L24, L25, \ - L30, L31, L32, L33, L34, L35, \ - L40, L41, L42, L43, L44, L45 ) \ - { \ - L05, L04, L03, L02, L01, L00, \ - L10, L11, L12, L13, L14, L15, \ - L25, L24, L23, L22, L21, L20, \ - L30, L31, L32, L33, L34, L35, \ - L46, L45, L44, L43, L42, L41 \ - } - -/* RGB LED logical order map */ -/* Top->Bottom, Right->Left */ -#define RGBLIGHT_LED_MAP LED_LAYOUT( \ - 25, 20, 15, 10, 5, 0, \ - 26, 21, 16, 11, 6, 1, \ - 27, 22, 17, 12, 7, 2, \ - 28, 23, 18, 13, 8, 3, \ - 29, 24, 19, 14, 9, 4 ) - ``` ## Clipping Range diff --git a/docs/feature_send_string.md b/docs/feature_send_string.md index 67df0224e9..7d3f3ba32a 100644 --- a/docs/feature_send_string.md +++ b/docs/feature_send_string.md @@ -1,4 +1,4 @@ -# Send String +# Send String :id=send-string The Send String API is part of QMK's macro system. It allows for sequences of keystrokes to be sent automatically. @@ -6,7 +6,7 @@ The full ASCII character set is supported, along with all of the keycodes in the ?> Unicode characters are **not** supported with this API -- see the [Unicode](feature_unicode.md) feature instead. -## Usage +## Usage :id=usage Send String is enabled by default, so there is usually no need for any special setup. However, if it is disabled, add the following to your `rules.mk`: @@ -14,7 +14,7 @@ Send String is enabled by default, so there is usually no need for any special s SEND_STRING_ENABLE = yes ``` -## Basic Configuration +## Basic Configuration :id=basic-configuration Add the following to your `config.h`: @@ -23,7 +23,7 @@ Add the following to your `config.h`: |`SENDSTRING_BELL`|*Not defined* |If the [Audio](feature_audio.md) feature is enabled, the `\a` character (ASCII `BEL`) will beep the speaker.| |`BELL_SOUND` |`TERMINAL_SOUND`|The song to play when the `\a` character is encountered. By default, this is an eighth note of C5. | -## Keycodes +## Keycodes :id=keycodes The Send String functions accept C string literals, but specific keycodes can be injected with the below macros. All of the keycodes in the [Basic Keycode range](keycodes_basic.md) are supported (as these are the only ones that will actually be sent to the host), but with an `X_` prefix instead of `KC_`. @@ -44,13 +44,13 @@ The following characters are also mapped to their respective keycodes for conven |`\t` |`\x1B`|`TAB`|`KC_TAB` | | |`\x7F`|`DEL`|`KC_DELETE` | -### Language Support +### Language Support :id=language-support By default, Send String assumes your OS keyboard layout is set to US ANSI. If you are using a different keyboard layout, you can [override the lookup tables used to convert ASCII characters to keystrokes](reference_keymap_extras.md#sendstring-support). -## Examples +## Examples :id=examples -### Hello World +### Hello World :id=example-hello-world A simple custom keycode which types out "Hello, world!" and the Enter key when pressed. @@ -70,7 +70,7 @@ bool process_record_user(uint16_t keycode, keyrecord_t *record) { } ``` -### Keycode Injection +### Keycode Injection :id=example-keycode-injection This example types out opening and closing curly braces, then taps the left arrow key to move the cursor between the two. @@ -84,26 +84,26 @@ This example types Ctrl+A, then Ctrl+C, without releasing Ctrl. SEND_STRING(SS_LCTL("ac")); ``` -## API +## API :id=api -### `void send_string(const char *string)` +### `void send_string(const char *string)` :id=api-send-string Type out a string of ASCII characters. This function simply calls `send_string_with_delay(string, 0)`. -#### Arguments +#### Arguments :id=api-send-string-arguments - `const char *string` The string to type out. --- -### `void send_string_with_delay(const char *string, uint8_t interval)` +### `void send_string_with_delay(const char *string, uint8_t interval)` :id=api-send-string-with-delay Type out a string of ASCII characters, with a delay between each character. -#### Arguments +#### Arguments :id=api-send-string-with-delay-arguments - `const char *string` The string to type out. @@ -112,26 +112,26 @@ Type out a string of ASCII characters, with a delay between each character. --- -### `void send_string_P(const char *string)` +### `void send_string_P(const char *string)` :id=api-send-string-p Type out a PROGMEM string of ASCII characters. On ARM devices, this function is simply an alias for `send_string_with_delay(string, 0)`. -#### Arguments +#### Arguments :id=api-send-string-p-arguments - `const char *string` The string to type out. --- -### `void send_string_with_delay_P(const char *string, uint8_t interval)` +### `void send_string_with_delay_P(const char *string, uint8_t interval)` :id=api-send-string-with-delay-p Type out a PROGMEM string of ASCII characters, with a delay between each character. On ARM devices, this function is simply an alias for `send_string_with_delay(string, interval)`. -#### Arguments +#### Arguments :id=api-send-string-with-delay-p-arguments - `const char *string` The string to type out. @@ -140,76 +140,76 @@ On ARM devices, this function is simply an alias for `send_string_with_delay(str --- -### `void send_char(char ascii_code)` +### `void send_char(char ascii_code)` :id=api-send-char Type out an ASCII character. -#### Arguments +#### Arguments :id=api-send-char-arguments - `char ascii_code` The character to type. --- -### `void send_dword(uint32_t number)` +### `void send_dword(uint32_t number)` :id=api-send-dword Type out an eight digit (unsigned 32-bit) hexadecimal value. The format is `[0-9a-f]{8}`, eg. `00000000` through `ffffffff`. -#### Arguments +#### Arguments :id=api-send-dword-arguments - `uint32_t number` The value to type, from 0 to 4,294,967,295. --- -### `void send_word(uint16_t number)` +### `void send_word(uint16_t number)` :id=api-send-word Type out a four digit (unsigned 16-bit) hexadecimal value. The format is `[0-9a-f]{4}`, eg. `0000` through `ffff`. -#### Arguments +#### Arguments :id=api-send-word-arguments - `uint16_t number` The value to type, from 0 to 65,535. --- -### `void send_byte(uint8_t number)` +### `void send_byte(uint8_t number)` :id=api-send-bytes Type out a two digit (8-bit) hexadecimal value. The format is `[0-9a-f]{2}`, eg. `00` through `ff`. -#### Arguments +#### Arguments :id=api-send-byte-arguments - `uint8_t number` The value to type, from 0 to 255. --- -### `void send_nibble(uint8_t number)` +### `void send_nibble(uint8_t number)` :id=api-send-nibble Type out a single hexadecimal digit. The format is `[0-9a-f]{1}`, eg. `0` through `f`. -#### Arguments +#### Arguments :id=api-send-nibble-arguments - `uint8_t number` The value to type, from 0 to 15. --- -### `void tap_random_base64(void)` +### `void tap_random_base64(void)` :id=api-tap-random-base64 Type a pseudorandom character from the set `A-Z`, `a-z`, `0-9`, `+` and `/`. --- -### `SEND_STRING(string)` +### `SEND_STRING(string)` :id=api-send-string-macro Shortcut macro for `send_string_with_delay_P(PSTR(string), 0)`. @@ -217,7 +217,7 @@ On ARM devices, this define evaluates to `send_string_with_delay(string, 0)`. --- -### `SEND_STRING_DELAY(string, interval)` +### `SEND_STRING_DELAY(string, interval)` :id=api-send-string-delay-macro Shortcut macro for `send_string_with_delay_P(PSTR(string), interval)`. diff --git a/docs/feature_unicode.md b/docs/feature_unicode.md index 455596dab5..312a033257 100644 --- a/docs/feature_unicode.md +++ b/docs/feature_unicode.md @@ -42,7 +42,7 @@ Add the following to your `rules.mk`: UNICODEMAP_ENABLE = yes ``` -Then add `X(i)` keycodes to your keymap, where _i_ is the desired character's index in the mapping table. This can be a numeric value, but it's recommended to keep the indices in an enum and access them by name. +Then add `UM(i)` keycodes to your keymap, where _i_ is the desired character's index in the mapping table. This can be a numeric value, but it's recommended to keep the indices in an enum and access them by name. ```c enum unicode_names { @@ -58,13 +58,13 @@ const uint32_t unicode_map[] PROGMEM = { }; ``` -Then you can use `X(BANG)`, `X(SNEK)` etc. in your keymap. +Then you can use `UM(BANG)`, `UM(SNEK)` etc. in your keymap. #### Lower and Upper Case -Characters often come in lower and upper case pairs, such as å and Å. To make inputting these characters easier, you can use `XP(i, j)` in your keymap, where _i_ and _j_ are the mapping table indices of the lower and upper case character, respectively. If you're holding down Shift or have Caps Lock turned on when you press the key, the second (upper case) character will be inserted; otherwise, the first (lower case) version will appear. +Characters often come in lower and upper case pairs, such as å and Å. To make inputting these characters easier, you can use `UP(i, j)` in your keymap, where _i_ and _j_ are the mapping table indices of the lower and upper case character, respectively. If you're holding down Shift or have Caps Lock turned on when you press the key, the second (upper case) character will be inserted; otherwise, the first (lower case) version will appear. -This is most useful when creating a keymap for an international layout with special characters. Instead of having to put the lower and upper case versions of a character on separate keys, you can have them both on the same key by using `XP()`. This helps blend Unicode keys in with regular alphas. +This is most useful when creating a keymap for an international layout with special characters. Instead of having to put the lower and upper case versions of a character on separate keys, you can have them both on the same key by using `UP()`. This helps blend Unicode keys in with regular alphas. Due to keycode size constraints, _i_ and _j_ can each only refer to one of the first 128 characters in your `unicode_map`. In other words, 0 ≤ _i_ ≤ 127 and 0 ≤ _j_ ≤ 127. This is enough for most use cases, but if you'd like to customize the index calculation, you can override the [`unicodemap_index()`](https://github.com/qmk/qmk_firmware/blob/71f640d47ee12c862c798e1f56392853c7b1c1a8/quantum/process_keycode/process_unicodemap.c#L36) function. This also allows you to, say, check Ctrl instead of Shift/Caps. diff --git a/docs/getting_started_make_guide.md b/docs/getting_started_make_guide.md index 1a7e276098..3d98e4602b 100644 --- a/docs/getting_started_make_guide.md +++ b/docs/getting_started_make_guide.md @@ -109,7 +109,7 @@ This allows you to send Unicode characters using `UC(<code point>)` in your keym `UNICODEMAP_ENABLE` -This allows you to send Unicode characters using `X(<map index>)` in your keymap. You will need to maintain a mapping table in your keymap file. All possible code points (up to `0x10FFFF`) are supported. +This allows you to send Unicode characters using `UM(<map index>)` in your keymap. You will need to maintain a mapping table in your keymap file. All possible code points (up to `0x10FFFF`) are supported. `UCIS_ENABLE` diff --git a/docs/i2c_driver.md b/docs/i2c_driver.md index f4e6c6619e..92b666b5e3 100644 --- a/docs/i2c_driver.md +++ b/docs/i2c_driver.md @@ -72,7 +72,7 @@ Configuration-wise, you'll need to set up the peripheral as per your MCU's datas The following configuration values depend on the specific MCU in use. -### I2Cv1 :id=i2cv1 +### I2Cv1 :id=arm-configuration-i2cv1 * STM32F1xx * STM32F2xx @@ -88,7 +88,7 @@ See [this page](https://www.playembedded.org/blog/stm32-i2c-chibios/#7_I2Cv1_con |`I2C1_CLOCK_SPEED` |`100000` | |`I2C1_DUTY_CYCLE` |`STD_DUTY_CYCLE`| -### I2Cv2 :id=i2cv2 +### I2Cv2 :id=arm-configuration-i2cv2 * STM32F0xx * STM32F3xx @@ -105,9 +105,9 @@ See [this page](https://www.playembedded.org/blog/stm32-i2c-chibios/#8_I2Cv2_I2C |`I2C1_TIMINGR_SCLH` |`38U` | |`I2C1_TIMINGR_SCLL` |`129U` | -## Functions :id=functions +## API :id=api -### `void i2c_init(void)` +### `void i2c_init(void)` :id=api-i2c-init Initialize the I2C driver. This function must be called only once, before any of the below functions can be called. @@ -126,28 +126,28 @@ void i2c_init(void) { --- -### `i2c_status_t i2c_start(uint8_t address, uint16_t timeout)` +### `i2c_status_t i2c_start(uint8_t address, uint16_t timeout)` :id=api-i2c-start Start an I2C transaction. -#### Arguments +#### Arguments :id=api-i2c-start-arguments - `uint8_t address` The 7-bit I2C address of the device (ie. without the read/write bit - this will be set automatically). - `uint16_t timeout` The time in milliseconds to wait for a response from the target device. -#### Return Value +#### Return Value :id=api-i2c-start-return `I2C_STATUS_TIMEOUT` if the timeout period elapses, `I2C_STATUS_ERROR` if some other error occurs, otherwise `I2C_STATUS_SUCCESS`. --- -### `i2c_status_t i2c_transmit(uint8_t address, uint8_t *data, uint16_t length, uint16_t timeout)` +### `i2c_status_t i2c_transmit(uint8_t address, uint8_t *data, uint16_t length, uint16_t timeout)` :id=api-i2c-transmit Send multiple bytes to the selected I2C device. -#### Arguments +#### Arguments :id=api-i2c-transmit-arguments - `uint8_t address` The 7-bit I2C address of the device. @@ -158,17 +158,17 @@ Send multiple bytes to the selected I2C device. - `uint16_t timeout` The time in milliseconds to wait for a response from the target device. -#### Return Value +#### Return Value :id=api-i2c-transmit-return `I2C_STATUS_TIMEOUT` if the timeout period elapses, `I2C_STATUS_ERROR` if some other error occurs, otherwise `I2C_STATUS_SUCCESS`. --- -### `i2c_status_t i2c_receive(uint8_t address, uint8_t* data, uint16_t length, uint16_t timeout)` +### `i2c_status_t i2c_receive(uint8_t address, uint8_t* data, uint16_t length, uint16_t timeout)` :id=api-i2c-receive Receive multiple bytes from the selected I2C device. -#### Arguments +#### Arguments :id=api-i2c-receive-arguments - `uint8_t address` The 7-bit I2C address of the device. @@ -179,17 +179,17 @@ Receive multiple bytes from the selected I2C device. - `uint16_t timeout` The time in milliseconds to wait for a response from the target device. -#### Return Value +#### Return Value :id=api-i2c-receive-return `I2C_STATUS_TIMEOUT` if the timeout period elapses, `I2C_STATUS_ERROR` if some other error occurs, otherwise `I2C_STATUS_SUCCESS`. --- -### `i2c_status_t i2c_writeReg(uint8_t devaddr, uint8_t regaddr, uint8_t* data, uint16_t length, uint16_t timeout)` +### `i2c_status_t i2c_writeReg(uint8_t devaddr, uint8_t regaddr, uint8_t* data, uint16_t length, uint16_t timeout)` :id=api-i2c-writereg Writes to a register with an 8-bit address on the I2C device. -#### Arguments +#### Arguments :id=api-i2c-writereg-arguments - `uint8_t devaddr` The 7-bit I2C address of the device. @@ -202,17 +202,17 @@ Writes to a register with an 8-bit address on the I2C device. - `uint16_t timeout` The time in milliseconds to wait for a response from the target device. -#### Return Value +#### Return Value :id=api-i2c-writereg-return `I2C_STATUS_TIMEOUT` if the timeout period elapses, `I2C_STATUS_ERROR` if some other error occurs, otherwise `I2C_STATUS_SUCCESS`. --- -### `i2c_status_t i2c_writeReg16(uint8_t devaddr, uint16_t regaddr, uint8_t* data, uint16_t length, uint16_t timeout)` +### `i2c_status_t i2c_writeReg16(uint8_t devaddr, uint16_t regaddr, uint8_t* data, uint16_t length, uint16_t timeout)` :id=api-i2c-writereg16 Writes to a register with a 16-bit address (big endian) on the I2C device. -#### Arguments +#### Arguments :id=api-i2c-writereg16-arguments - `uint8_t devaddr` The 7-bit I2C address of the device. @@ -225,17 +225,17 @@ Writes to a register with a 16-bit address (big endian) on the I2C device. - `uint16_t timeout` The time in milliseconds to wait for a response from the target device. -#### Return Value +#### Return Value :id=api-i2c-writereg16-return `I2C_STATUS_TIMEOUT` if the timeout period elapses, `I2C_STATUS_ERROR` if some other error occurs, otherwise `I2C_STATUS_SUCCESS`. --- -### `i2c_status_t i2c_readReg(uint8_t devaddr, uint8_t regaddr, uint8_t* data, uint16_t length, uint16_t timeout)` +### `i2c_status_t i2c_readReg(uint8_t devaddr, uint8_t regaddr, uint8_t* data, uint16_t length, uint16_t timeout)` :id=api-i2c-readreg Reads from a register with an 8-bit address on the I2C device. -#### Arguments +#### Arguments :id=api-i2c-readreg-arguments - `uint8_t devaddr` The 7-bit I2C address of the device. @@ -246,7 +246,7 @@ Reads from a register with an 8-bit address on the I2C device. - `uint16_t timeout` The time in milliseconds to wait for a response from the target device. -#### Return Value +#### Return Value :id=api-i2c-readreg-return `I2C_STATUS_TIMEOUT` if the timeout period elapses, `I2C_STATUS_ERROR` if some other error occurs, otherwise `I2C_STATUS_SUCCESS`. @@ -256,7 +256,7 @@ Reads from a register with an 8-bit address on the I2C device. Reads from a register with a 16-bit address (big endian) on the I2C device. -#### Arguments +#### Arguments :id=api-i2c-readreg16-arguments - `uint8_t devaddr` The 7-bit I2C address of the device. @@ -267,12 +267,12 @@ Reads from a register with a 16-bit address (big endian) on the I2C device. - `uint16_t timeout` The time in milliseconds to wait for a response from the target device. -#### Return Value +#### Return Value :id=api-i2c-readreg16-return `I2C_STATUS_TIMEOUT` if the timeout period elapses, `I2C_STATUS_ERROR` if some other error occurs, otherwise `I2C_STATUS_SUCCESS`. --- -### `i2c_status_t i2c_stop(void)` +### `i2c_status_t i2c_stop(void)` :id=api-i2c-stop Stop the current I2C transaction. diff --git a/docs/ja/data_driven_config.md b/docs/ja/data_driven_config.md index bc8f4d24a5..6296173b66 100644 --- a/docs/ja/data_driven_config.md +++ b/docs/ja/data_driven_config.md @@ -109,8 +109,8 @@ QMK が完全な `info.json` を生成するときはいつでも、`config.h` パズルの最後のピースは、ビルドシステムに新しいオプションを提供することです。 これは、2つのファイルを生成することによって行われます。 -* `.build/obj_<keyboard>/src/info_config.h` -* `.build/obj_<keyboard>/src/rules.mk` +* `.build/obj_<keyboard>_<keymap>/src/info_config.h` +* `.build/obj_<keyboard>_<keymap>/src/rules.mk` この2つのファイルは、次のコードによって生成されます。 diff --git a/docs/keycodes.md b/docs/keycodes.md index e5b6246af7..65762234a4 100644 --- a/docs/keycodes.md +++ b/docs/keycodes.md @@ -848,8 +848,8 @@ See also: [Unicode Support](feature_unicode.md) |Key |Aliases |Description | |----------------------------|---------|----------------------------------------------------------------| |`UC(c)` | |Send Unicode code point `c`, up to `0x7FFF` | -|`X(i)` | |Send Unicode code point at index `i` in `unicode_map` | -|`XP(i, j)` | |Send Unicode code point at index `i`, or `j` if Shift/Caps is on| +|`UM(i)` | |Send Unicode code point at index `i` in `unicode_map` | +|`UP(i, j)` | |Send Unicode code point at index `i`, or `j` if Shift/Caps is on| |`QK_UNICODE_MODE_NEXT` |`UC_NEXT`|Cycle through selected input modes | |`QK_UNICODE_MODE_PREVIOUS` |`UC_PREV`|Cycle through selected input modes in reverse | |`QK_UNICODE_MODE_MACOS` |`UC_MAC` |Switch to macOS input | diff --git a/docs/spi_driver.md b/docs/spi_driver.md index a27a3a13d0..c1c6831e73 100644 --- a/docs/spi_driver.md +++ b/docs/spi_driver.md @@ -1,8 +1,8 @@ -# SPI Master Driver +# SPI Master Driver :id=spi-master-driver The SPI Master drivers used in QMK have a set of common functions to allow portability between MCUs. -## AVR Configuration +## AVR Configuration :id=avr-configuration No special setup is required - just connect the `SS`, `SCK`, `MOSI` and `MISO` pins of your SPI devices to the matching pins on the MCU: @@ -16,7 +16,7 @@ No special setup is required - just connect the `SS`, `SCK`, `MOSI` and `MISO` p You may use more than one slave select pin, not just the `SS` pin. This is useful when you have multiple devices connected and need to communicate with them individually. `SPI_SS_PIN` can be passed to `spi_start()` to refer to `SS`. -## ChibiOS/ARM Configuration +## ChibiOS/ARM Configuration :id=arm-configuration You'll need to determine which pins can be used for SPI -- as an example, STM32 parts generally have multiple SPI peripherals, labeled SPI1, SPI2, SPI3 etc. @@ -49,19 +49,19 @@ Configuration-wise, you'll need to set up the peripheral as per your MCU's datas As per the AVR configuration, you may choose any other standard GPIO as a slave select pin, which should be supplied to `spi_start()`. -## Functions +## API :id=api -### `void spi_init(void)` +### `void spi_init(void)` :id=api-spi-init Initialize the SPI driver. This function must be called only once, before any of the below functions can be called. --- -### `bool spi_start(pin_t slavePin, bool lsbFirst, uint8_t mode, uint16_t divisor)` +### `bool spi_start(pin_t slavePin, bool lsbFirst, uint8_t mode, uint16_t divisor)` :id=api-spi-start Start an SPI transaction. -#### Arguments +#### Arguments :id=api-spi-start-arguments - `pin_t slavePin` The QMK pin to assert as the slave select pin, eg. `B4`. @@ -80,71 +80,71 @@ Start an SPI transaction. - `uint16_t divisor` The SPI clock divisor, will be rounded up to the nearest power of two. This number can be calculated by dividing the MCU's clock speed by the desired SPI clock speed. For example, an MCU running at 8 MHz wanting to talk to an SPI device at 4 MHz would set the divisor to `2`. -#### Return Value +#### Return Value :id=api-spi-start-return `false` if the supplied parameters are invalid or the SPI peripheral is already in use, or `true`. --- -### `spi_status_t spi_write(uint8_t data)` +### `spi_status_t spi_write(uint8_t data)` :id=api-spi-write Write a byte to the selected SPI device. -#### Arguments +#### Arguments :id=api-spi-write-arguments - `uint8_t data` The byte to write. -#### Return Value +#### Return Value :id=api-spi-write-return `SPI_STATUS_TIMEOUT` if the timeout period elapses, or `SPI_STATUS_SUCCESS`. --- -### `spi_status_t spi_read(void)` +### `spi_status_t spi_read(void)` :id=api-spi-read Read a byte from the selected SPI device. -#### Return Value +#### Return Value :id=api-spi-read-return `SPI_STATUS_TIMEOUT` if the timeout period elapses, or the byte read from the device. --- -### `spi_status_t spi_transmit(const uint8_t *data, uint16_t length)` +### `spi_status_t spi_transmit(const uint8_t *data, uint16_t length)` :id=api-spi-transmit Send multiple bytes to the selected SPI device. -#### Arguments +#### Arguments :id=api-spi-transmit-arguments - `const uint8_t *data` A pointer to the data to write from. - `uint16_t length` The number of bytes to write. Take care not to overrun the length of `data`. -#### Return Value +#### Return Value :id=api-spi-transmit-return `SPI_STATUS_TIMEOUT` if the timeout period elapses, `SPI_STATUS_ERROR` if some other error occurs, otherwise `SPI_STATUS_SUCCESS`. --- -### `spi_status_t spi_receive(uint8_t *data, uint16_t length)` +### `spi_status_t spi_receive(uint8_t *data, uint16_t length)` :id=api-spi-receive Receive multiple bytes from the selected SPI device. -#### Arguments +#### Arguments :id=api-spi-receive-arguments - `uint8_t *data` A pointer to the buffer to read into. - `uint16_t length` The number of bytes to read. Take care not to overrun the length of `data`. -#### Return Value +#### Return Value :id=api-spi-receive-return `SPI_STATUS_TIMEOUT` if the timeout period elapses, `SPI_STATUS_ERROR` if some other error occurs, otherwise `SPI_STATUS_SUCCESS`. --- -### `void spi_stop(void)` +### `void spi_stop(void)` :id=api-spi-stop End the current SPI transaction. This will deassert the slave select pin and reset the endianness, mode and divisor configured by `spi_start()`. diff --git a/docs/uart_driver.md b/docs/uart_driver.md index 340b648189..a44f2c28d9 100644 --- a/docs/uart_driver.md +++ b/docs/uart_driver.md @@ -1,10 +1,10 @@ -# UART Driver +# UART Driver :id=uart-driver The UART drivers used in QMK have a set of common functions to allow portability between MCUs. Currently, this driver does not support enabling hardware flow control (the `RTS` and `CTS` pins) if available, but may do so in future. -## AVR Configuration +## AVR Configuration :id=avr-configuration No special setup is required - just connect the `RX` and `TX` pins of your UART device to the opposite pins on the MCU: @@ -16,7 +16,7 @@ No special setup is required - just connect the `RX` and `TX` pins of your UART |ATmega32A |`D1`|`D0`|*n/a*|*n/a*| |ATmega328/P |`D1`|`D0`|*n/a*|*n/a*| -## ChibiOS/ARM Configuration +## ChibiOS/ARM Configuration :id=arm-configuration You'll need to determine which pins can be used for UART -- as an example, STM32 parts generally have multiple UART peripherals, labeled USART1, USART2, USART3 etc. @@ -47,45 +47,45 @@ Configuration-wise, you'll need to set up the peripheral as per your MCU's datas |`#define SD1_RTS_PIN` |The pin to use for RTS |`A12` | |`#define SD1_RTS_PAL_MODE`|The alternate function mode for RTS |`7` | -## Functions +## API :id=api -### `void uart_init(uint32_t baud)` +### `void uart_init(uint32_t baud)` :id=api-uart-init Initialize the UART driver. This function must be called only once, before any of the below functions can be called. -#### Arguments +#### Arguments :id=api-uart-init-arguments - `uint32_t baud` The baud rate to transmit and receive at. This may depend on the device you are communicating with. Common values are 1200, 2400, 4800, 9600, 19200, 38400, 57600, and 115200. --- -### `void uart_write(uint8_t data)` +### `void uart_write(uint8_t data)` :id=api-uart-write Transmit a single byte. -#### Arguments +#### Arguments :id=api-uart-write-arguments - `uint8_t data` The byte to write. --- -### `uint8_t uart_read(void)` +### `uint8_t uart_read(void)` :id=api-uart-read Receive a single byte. -#### Return Value +#### Return Value :id=api-uart-read-return The byte read from the receive buffer. This function will block if the buffer is empty (ie. no data to read). --- -### `void uart_transmit(const uint8_t *data, uint16_t length)` +### `void uart_transmit(const uint8_t *data, uint16_t length)` :id=api-uart-transmit Transmit multiple bytes. -#### Arguments +#### Arguments :id=api-uart-transmit-arguments - `const uint8_t *data` A pointer to the data to write from. @@ -94,11 +94,11 @@ Transmit multiple bytes. --- -### `void uart_receive(char *data, uint16_t length)` +### `void uart_receive(char *data, uint16_t length)` :id=api-uart-receive Receive multiple bytes. -#### Arguments +#### Arguments :id=api-uart-receive-arguments - `uint8_t *data` A pointer to the buffer to read into. @@ -107,10 +107,10 @@ Receive multiple bytes. --- -### `bool uart_available(void)` +### `bool uart_available(void)` :id=api-uart-available Return whether the receive buffer contains data. Call this function to determine if `uart_read()` will return data immediately. -#### Return Value +#### Return Value :id=api-uart-available-return `true` if the receive buffer length is non-zero. diff --git a/drivers/led/aw20216.c b/drivers/led/aw20216.c index 7895f1497b..5fd25eed88 100644 --- a/drivers/led/aw20216.c +++ b/drivers/led/aw20216.c @@ -145,6 +145,9 @@ void AW20216_set_color(int index, uint8_t red, uint8_t green, uint8_t blue) { aw_led led; memcpy_P(&led, (&g_aw_leds[index]), sizeof(led)); + if (g_pwm_buffer[led.driver][led.r] == red && g_pwm_buffer[led.driver][led.g] == green && g_pwm_buffer[led.driver][led.b] == blue) { + return; + } g_pwm_buffer[led.driver][led.r] = red; g_pwm_buffer[led.driver][led.g] = green; g_pwm_buffer[led.driver][led.b] = blue; diff --git a/drivers/led/ckled2001-simple.c b/drivers/led/ckled2001-simple.c index 6c4ffd398e..ee192af7dc 100644 --- a/drivers/led/ckled2001-simple.c +++ b/drivers/led/ckled2001-simple.c @@ -151,6 +151,9 @@ void CKLED2001_set_value(int index, uint8_t value) { if (index >= 0 && index < LED_MATRIX_LED_COUNT) { memcpy_P(&led, (&g_ckled2001_leds[index]), sizeof(led)); + if (g_pwm_buffer[led.driver][led.v] == value) { + return; + } g_pwm_buffer[led.driver][led.v] = value; g_pwm_buffer_update_required[led.driver] = true; } diff --git a/drivers/led/ckled2001.c b/drivers/led/ckled2001.c index a99b479d1c..d0099163ee 100644 --- a/drivers/led/ckled2001.c +++ b/drivers/led/ckled2001.c @@ -150,6 +150,9 @@ void CKLED2001_set_color(int index, uint8_t red, uint8_t green, uint8_t blue) { if (index >= 0 && index < RGB_MATRIX_LED_COUNT) { memcpy_P(&led, (&g_ckled2001_leds[index]), sizeof(led)); + if (g_pwm_buffer[led.driver][led.r] == red && g_pwm_buffer[led.driver][led.g] == green && g_pwm_buffer[led.driver][led.b] == blue) { + return; + } g_pwm_buffer[led.driver][led.r] = red; g_pwm_buffer[led.driver][led.g] = green; g_pwm_buffer[led.driver][led.b] = blue; diff --git a/drivers/led/issi/is31fl3218.c b/drivers/led/issi/is31fl3218.c index c2300ebe89..1ed45c4558 100644 --- a/drivers/led/issi/is31fl3218.c +++ b/drivers/led/issi/is31fl3218.c @@ -72,6 +72,9 @@ void IS31FL3218_init(void) { } void IS31FL3218_set_color(int index, uint8_t red, uint8_t green, uint8_t blue) { + if (g_pwm_buffer[index * 3 + 0] == red && g_pwm_buffer[index * 3 + 1] == green && g_pwm_buffer[index * 3 + 2] == blue) { + return; + } g_pwm_buffer[index * 3 + 0] = red; g_pwm_buffer[index * 3 + 1] = green; g_pwm_buffer[index * 3 + 2] = blue; diff --git a/drivers/led/issi/is31fl3731-simple.c b/drivers/led/issi/is31fl3731-simple.c index a62b21cc6b..da4f17b73d 100644 --- a/drivers/led/issi/is31fl3731-simple.c +++ b/drivers/led/issi/is31fl3731-simple.c @@ -196,6 +196,10 @@ void IS31FL3731_set_value(int index, uint8_t value) { memcpy_P(&led, (&g_is31_leds[index]), sizeof(led)); // Subtract 0x24 to get the second index of g_pwm_buffer + + if (g_pwm_buffer[led.driver][led.v - 0x24] == value) { + return; + } g_pwm_buffer[led.driver][led.v - 0x24] = value; g_pwm_buffer_update_required[led.driver] = true; } diff --git a/drivers/led/issi/is31fl3731.c b/drivers/led/issi/is31fl3731.c index 80344ca721..b8b520161e 100644 --- a/drivers/led/issi/is31fl3731.c +++ b/drivers/led/issi/is31fl3731.c @@ -184,6 +184,9 @@ void IS31FL3731_set_color(int index, uint8_t red, uint8_t green, uint8_t blue) { memcpy_P(&led, (&g_is31_leds[index]), sizeof(led)); // Subtract 0x24 to get the second index of g_pwm_buffer + if (g_pwm_buffer[led.driver][led.r - 0x24] == red && g_pwm_buffer[led.driver][led.g - 0x24] == green && g_pwm_buffer[led.driver][led.b - 0x24] == blue) { + return; + } g_pwm_buffer[led.driver][led.r - 0x24] = red; g_pwm_buffer[led.driver][led.g - 0x24] = green; g_pwm_buffer[led.driver][led.b - 0x24] = blue; diff --git a/drivers/led/issi/is31fl3733-simple.c b/drivers/led/issi/is31fl3733-simple.c index 21138c6e05..d90fd8587f 100644 --- a/drivers/led/issi/is31fl3733-simple.c +++ b/drivers/led/issi/is31fl3733-simple.c @@ -193,9 +193,13 @@ void IS31FL3733_init(uint8_t addr, uint8_t sync) { } void IS31FL3733_set_value(int index, uint8_t value) { + is31_led led; if (index >= 0 && index < LED_MATRIX_LED_COUNT) { - is31_led led = g_is31_leds[index]; + memcpy_P(&led, (&g_is31_leds[index]), sizeof(led)); + if (g_pwm_buffer[led.driver][led.v] == value) { + return; + } g_pwm_buffer[led.driver][led.v] = value; g_pwm_buffer_update_required[led.driver] = true; } @@ -208,7 +212,8 @@ void IS31FL3733_set_value_all(uint8_t value) { } void IS31FL3733_set_led_control_register(uint8_t index, bool value) { - is31_led led = g_is31_leds[index]; + is31_led led; + memcpy_P(&led, (&g_is31_leds[index]), sizeof(led)); uint8_t control_register = led.v / 8; uint8_t bit_value = led.v % 8; diff --git a/drivers/led/issi/is31fl3733-simple.h b/drivers/led/issi/is31fl3733-simple.h index 1571fdd3d5..bd61082f42 100644 --- a/drivers/led/issi/is31fl3733-simple.h +++ b/drivers/led/issi/is31fl3733-simple.h @@ -30,7 +30,7 @@ typedef struct is31_led { uint8_t v; } __attribute__((packed)) is31_led; -extern const is31_led __flash g_is31_leds[LED_MATRIX_LED_COUNT]; +extern const is31_led PROGMEM g_is31_leds[LED_MATRIX_LED_COUNT]; void IS31FL3733_init(uint8_t addr, uint8_t sync); bool IS31FL3733_write_register(uint8_t addr, uint8_t reg, uint8_t data); diff --git a/drivers/led/issi/is31fl3733.c b/drivers/led/issi/is31fl3733.c index 379eaa0ae3..b2b467ab9e 100644 --- a/drivers/led/issi/is31fl3733.c +++ b/drivers/led/issi/is31fl3733.c @@ -189,6 +189,9 @@ void IS31FL3733_set_color(int index, uint8_t red, uint8_t green, uint8_t blue) { if (index >= 0 && index < RGB_MATRIX_LED_COUNT) { memcpy_P(&led, (&g_is31_leds[index]), sizeof(led)); + if (g_pwm_buffer[led.driver][led.r] == red && g_pwm_buffer[led.driver][led.g] == green && g_pwm_buffer[led.driver][led.b] == blue) { + return; + } g_pwm_buffer[led.driver][led.r] = red; g_pwm_buffer[led.driver][led.g] = green; g_pwm_buffer[led.driver][led.b] = blue; diff --git a/drivers/led/issi/is31fl3736.c b/drivers/led/issi/is31fl3736.c index d6b0881139..45b34f2c8d 100644 --- a/drivers/led/issi/is31fl3736.c +++ b/drivers/led/issi/is31fl3736.c @@ -169,6 +169,9 @@ void IS31FL3736_set_color(int index, uint8_t red, uint8_t green, uint8_t blue) { if (index >= 0 && index < RGB_MATRIX_LED_COUNT) { memcpy_P(&led, (&g_is31_leds[index]), sizeof(led)); + if (g_pwm_buffer[led.driver][led.r] == red && g_pwm_buffer[led.driver][led.g] == green && g_pwm_buffer[led.driver][led.b] == blue) { + return; + } g_pwm_buffer[led.driver][led.r] = red; g_pwm_buffer[led.driver][led.g] = green; g_pwm_buffer[led.driver][led.b] = blue; diff --git a/drivers/led/issi/is31fl3737.c b/drivers/led/issi/is31fl3737.c index b6ed6b2629..e5e6c66e5a 100644 --- a/drivers/led/issi/is31fl3737.c +++ b/drivers/led/issi/is31fl3737.c @@ -176,6 +176,9 @@ void IS31FL3737_set_color(int index, uint8_t red, uint8_t green, uint8_t blue) { if (index >= 0 && index < RGB_MATRIX_LED_COUNT) { memcpy_P(&led, (&g_is31_leds[index]), sizeof(led)); + if (g_pwm_buffer[led.driver][led.r] == red && g_pwm_buffer[led.driver][led.g] == green && g_pwm_buffer[led.driver][led.b] == blue) { + return; + } g_pwm_buffer[led.driver][led.r] = red; g_pwm_buffer[led.driver][led.g] = green; g_pwm_buffer[led.driver][led.b] = blue; diff --git a/drivers/led/issi/is31fl3741.c b/drivers/led/issi/is31fl3741.c index 2f43473fc1..65f0c3640b 100644 --- a/drivers/led/issi/is31fl3741.c +++ b/drivers/led/issi/is31fl3741.c @@ -180,10 +180,13 @@ void IS31FL3741_set_color(int index, uint8_t red, uint8_t green, uint8_t blue) { if (index >= 0 && index < RGB_MATRIX_LED_COUNT) { memcpy_P(&led, (&g_is31_leds[index]), sizeof(led)); + if (g_pwm_buffer[led.driver][led.r] == red && g_pwm_buffer[led.driver][led.g] == green && g_pwm_buffer[led.driver][led.b] == blue) { + return; + } + g_pwm_buffer_update_required[led.driver] = true; g_pwm_buffer[led.driver][led.r] = red; g_pwm_buffer[led.driver][led.g] = green; g_pwm_buffer[led.driver][led.b] = blue; - g_pwm_buffer_update_required[led.driver] = true; } } diff --git a/drivers/led/issi/is31flcommon.c b/drivers/led/issi/is31flcommon.c index 106890a8bf..4b78947ada 100644 --- a/drivers/led/issi/is31flcommon.c +++ b/drivers/led/issi/is31flcommon.c @@ -133,19 +133,28 @@ void IS31FL_common_update_pwm_register(uint8_t addr, uint8_t index) { #ifdef ISSI_MANUAL_SCALING void IS31FL_set_manual_scaling_buffer(void) { + is31_led led; + is31_led scale; for (int i = 0; i < ISSI_MANUAL_SCALING; i++) { - is31_led scale = g_is31_scaling[i]; + memcpy_P(&scale, (&g_is31_scaling[i]), sizeof(scale)); + # ifdef RGB_MATRIX_ENABLE if (scale.driver >= 0 && scale.driver < RGB_MATRIX_LED_COUNT) { - is31_led led = g_is31_leds[scale.driver]; + memcpy_P(&led, (&g_is31_leds[scale.driver]), sizeof(led)); + if (g_scaling_buffer[led.driver][led.r] = scale.r && g_scaling_buffer[led.driver][led.g] = scale.g && g_scaling_buffer[led.driver][led.b] = scale.b) { + return; + } g_scaling_buffer[led.driver][led.r] = scale.r; g_scaling_buffer[led.driver][led.g] = scale.g; g_scaling_buffer[led.driver][led.b] = scale.b; # elif defined(LED_MATRIX_ENABLE) if (scale.driver >= 0 && scale.driver < LED_MATRIX_LED_COUNT) { - is31_led led = g_is31_leds[scale.driver]; + memcpy_P(&led, (&g_is31_leds[scale.driver]), sizeof(led)); + if (g_scaling_buffer[led.driver][led.v] == scale.v) { + return; + } g_scaling_buffer[led.driver][led.v] = scale.v; # endif g_scaling_buffer_update_required[led.driver] = true; @@ -169,7 +178,8 @@ void IS31FL_common_update_scaling_register(uint8_t addr, uint8_t index) { // Colour is set by adjusting PWM register void IS31FL_RGB_set_color(int index, uint8_t red, uint8_t green, uint8_t blue) { if (index >= 0 && index < RGB_MATRIX_LED_COUNT) { - is31_led led = g_is31_leds[index]; + is31_led led; + memcpy_P(&led, (&g_is31_leds[index]), sizeof(led)); g_pwm_buffer[led.driver][led.r] = red; g_pwm_buffer[led.driver][led.g] = green; @@ -186,7 +196,8 @@ void IS31FL_RGB_set_color_all(uint8_t red, uint8_t green, uint8_t blue) { // Setup Scaling register that decides the peak current of each LED void IS31FL_RGB_set_scaling_buffer(uint8_t index, bool red, bool green, bool blue) { - is31_led led = g_is31_leds[index]; + is31_led led; + memcpy_P(&led, (&g_is31_leds[index]), sizeof(led)); if (red) { g_scaling_buffer[led.driver][led.r] = ISSI_SCAL_RED; } else { @@ -208,7 +219,8 @@ void IS31FL_RGB_set_scaling_buffer(uint8_t index, bool red, bool green, bool blu #elif defined(LED_MATRIX_ENABLE) // LED Matrix Specific scripts void IS31FL_simple_set_scaling_buffer(uint8_t index, bool value) { - is31_led led = g_is31_leds[index]; + is31_led led; + memcpy_P(&led, (&g_is31_leds[index]), sizeof(led)); if (value) { g_scaling_buffer[led.driver][led.v] = ISSI_SCAL_LED; } else { @@ -219,7 +231,9 @@ void IS31FL_simple_set_scaling_buffer(uint8_t index, bool value) { void IS31FL_simple_set_brightness(int index, uint8_t value) { if (index >= 0 && index < LED_MATRIX_LED_COUNT) { - is31_led led = g_is31_leds[index]; + is31_led led; + memcpy_P(&led, (&g_is31_leds[index]), sizeof(led)); + g_pwm_buffer[led.driver][led.v] = value; g_pwm_buffer_update_required[led.driver] = true; } diff --git a/drivers/led/issi/is31flcommon.h b/drivers/led/issi/is31flcommon.h index 18432ffc31..4b3add558b 100644 --- a/drivers/led/issi/is31flcommon.h +++ b/drivers/led/issi/is31flcommon.h @@ -43,7 +43,7 @@ typedef struct is31_led { uint8_t b; } __attribute__((packed)) is31_led; -extern const is31_led __flash g_is31_leds[RGB_MATRIX_LED_COUNT]; +extern const is31_led PROGMEM g_is31_leds[RGB_MATRIX_LED_COUNT]; #elif defined(LED_MATRIX_ENABLE) typedef struct is31_led { @@ -51,11 +51,11 @@ typedef struct is31_led { uint8_t v; } __attribute__((packed)) is31_led; -extern const is31_led __flash g_is31_leds[LED_MATRIX_LED_COUNT]; +extern const is31_led PROGMEM g_is31_leds[LED_MATRIX_LED_COUNT]; #endif #ifdef ISSI_MANUAL_SCALING -extern const is31_led __flash g_is31_scaling[]; +extern const is31_led PROGMEM g_is31_scaling[]; void IS31FL_set_manual_scaling_buffer(void); #endif diff --git a/drivers/painter/ili9xxx/qp_ili9xxx_opcodes.h b/drivers/painter/ili9xxx/qp_ili9xxx_opcodes.h index 47bb703648..f57e638e03 100644 --- a/drivers/painter/ili9xxx/qp_ili9xxx_opcodes.h +++ b/drivers/painter/ili9xxx/qp_ili9xxx_opcodes.h @@ -19,8 +19,8 @@ #define ILI9XXX_CMD_SLEEP_OFF 0x11 // Exist sleep mode #define ILI9XXX_CMD_PARTIAL_ON 0x12 // Enter partial mode #define ILI9XXX_CMD_PARTIAL_OFF 0x13 // Exit partial mode -#define ILI9XXX_CMD_INVERT_ON 0x20 // Enter inverted mode -#define ILI9XXX_CMD_INVERT_OFF 0x21 // Exit inverted mode +#define ILI9XXX_CMD_INVERT_OFF 0x20 // Exit inverted mode +#define ILI9XXX_CMD_INVERT_ON 0x21 // Enter inverted mode #define ILI9XXX_SET_GAMMA 0x26 // Set gamma params #define ILI9XXX_CMD_DISPLAY_OFF 0x28 // Disable display #define ILI9XXX_CMD_DISPLAY_ON 0x29 // Enable display diff --git a/drivers/ps2/ps2_mouse.c b/drivers/ps2/ps2_mouse.c index d6911d66f2..ae594c94bc 100644 --- a/drivers/ps2/ps2_mouse.c +++ b/drivers/ps2/ps2_mouse.c @@ -191,13 +191,12 @@ static inline void ps2_mouse_convert_report_to_hid(report_mouse_t *mouse_report) #ifdef PS2_MOUSE_INVERT_BUTTONS // swap left & right buttons - uint8_t needs_left = mouse_report->buttons & PS2_MOUSE_BTN_RIGHT; - uint8_t needs_right = mouse_report->buttons & PS2_MOUSE_BTN_LEFT; - mouse_report->buttons = (mouse_report->buttons & ~(PS2_MOUSE_BTN_MASK)) | (needs_left ? PS2_MOUSE_BTN_LEFT : 0) | (needs_right ? PS2_MOUSE_BTN_RIGHT : 0); -#else + bool needs_left = mouse_report->buttons & (1 << PS2_MOUSE_BTN_RIGHT); + bool needs_right = mouse_report->buttons & (1 << PS2_MOUSE_BTN_LEFT); + mouse_report->buttons = (mouse_report->buttons & ~((1 << PS2_MOUSE_BTN_LEFT) | (1 << PS2_MOUSE_BTN_RIGHT))) | (needs_left << PS2_MOUSE_BTN_LEFT) | (needs_right << PS2_MOUSE_BTN_RIGHT); +#endif // remove sign and overflow flags mouse_report->buttons &= PS2_MOUSE_BTN_MASK; -#endif #ifdef PS2_MOUSE_INVERT_X mouse_report->x = -mouse_report->x; diff --git a/keyboards/0_sixty/underglow/config.h b/keyboards/0_sixty/underglow/config.h index 6efe6e18cd..2d4eaa013a 100644 --- a/keyboards/0_sixty/underglow/config.h +++ b/keyboards/0_sixty/underglow/config.h @@ -18,7 +18,6 @@ /* underglow */ -#define RGBLED_NUM 24 #define RGBLIGHT_EFFECT_BREATHING #define RGBLIGHT_EFFECT_RAINBOW_MOOD #define RGBLIGHT_EFFECT_RAINBOW_SWIRL diff --git a/keyboards/0_sixty/underglow/info.json b/keyboards/0_sixty/underglow/info.json index 2491491561..89a35f9a1c 100644 --- a/keyboards/0_sixty/underglow/info.json +++ b/keyboards/0_sixty/underglow/info.json @@ -10,6 +10,7 @@ "pin": "B6" }, "rgblight": { + "led_count": 24, "max_brightness": 185 } } diff --git a/keyboards/0xcb/1337/config.h b/keyboards/0xcb/1337/config.h index cf4ea821bf..2d85a92387 100644 --- a/keyboards/0xcb/1337/config.h +++ b/keyboards/0xcb/1337/config.h @@ -18,13 +18,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. // clang-format off -#define TAP_CODE_DELAY 10 - - #define RGBLED_NUM 4 - #define RGBLIGHT_HUE_STEP 8 - #define RGBLIGHT_SAT_STEP 8 - #define RGBLIGHT_VAL_STEP 8 - #define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */ #define RGBLIGHT_EFFECT_BREATHING #define RGBLIGHT_EFFECT_RAINBOW_MOOD #define RGBLIGHT_EFFECT_RAINBOW_SWIRL diff --git a/keyboards/0xcb/1337/info.json b/keyboards/0xcb/1337/info.json index a0b04ba7df..c72cd83f5d 100644 --- a/keyboards/0xcb/1337/info.json +++ b/keyboards/0xcb/1337/info.json @@ -18,9 +18,18 @@ {"pin_a": "F6", "pin_b": "F5"} ] }, + "qmk": { + "tap_keycode_delay": 10 + }, "qmk_lufa_bootloader": { "led": "B0" }, + "rgblight": { + "saturation_steps": 8, + "brightness_steps": 8, + "led_count": 4, + "sleep": true + }, "ws2812": { "pin": "D3" }, diff --git a/keyboards/0xcb/static/config.h b/keyboards/0xcb/static/config.h index 10b1f88216..179c84088b 100644 --- a/keyboards/0xcb/static/config.h +++ b/keyboards/0xcb/static/config.h @@ -16,8 +16,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. */ #pragma once -#define TAP_CODE_DELAY 10 - /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ #define LOCKING_SUPPORT_ENABLE /* Locking resynchronize hack */ diff --git a/keyboards/0xcb/static/info.json b/keyboards/0xcb/static/info.json index 7a678a0194..97f5e53cad 100644 --- a/keyboards/0xcb/static/info.json +++ b/keyboards/0xcb/static/info.json @@ -18,6 +18,9 @@ {"pin_a": "D0", "pin_b": "D1"} ] }, + "qmk": { + "tap_keycode_delay": 10 + }, "processor": "atmega328p", "bootloader": "usbasploader", "layout_aliases": { diff --git a/keyboards/0xcb/tutelpad/config.h b/keyboards/0xcb/tutelpad/config.h index f64205d126..08d69e0100 100644 --- a/keyboards/0xcb/tutelpad/config.h +++ b/keyboards/0xcb/tutelpad/config.h @@ -16,13 +16,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #pragma once -#define RGBLED_NUM 4 // Number of LEDs connected - -#define RGBLIGHT_HUE_STEP 10 // The number of steps to cycle through the hue by -#define RGBLIGHT_SAT_STEP 17 // The number of steps to increment the saturation by -#define RGBLIGHT_VAL_STEP 17 // The number of steps to increment the brightness by -#define RGBLIGHT_SLEEP // RGB will switch off when host goes to sleep - #define RGBLIGHT_EFFECT_BREATHING // Enable all additional RGB animation modes #define RGBLIGHT_EFFECT_RAINBOW_MOOD #define RGBLIGHT_EFFECT_RAINBOW_SWIRL diff --git a/keyboards/0xcb/tutelpad/info.json b/keyboards/0xcb/tutelpad/info.json index 79fdf0af45..7c23d0b2bc 100644 --- a/keyboards/0xcb/tutelpad/info.json +++ b/keyboards/0xcb/tutelpad/info.json @@ -11,6 +11,11 @@ "bootmagic": { "matrix": [1, 0] }, + "rgblight": { + "hue_steps": 10, + "led_count": 4, + "sleep": true + }, "ws2812": { "pin": "D3" }, diff --git a/keyboards/10bleoledhub/config.h b/keyboards/10bleoledhub/config.h index ae376dfa53..d5ec736436 100644 --- a/keyboards/10bleoledhub/config.h +++ b/keyboards/10bleoledhub/config.h @@ -18,8 +18,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.*/ #define SSD1306OLED -#define RGBLED_NUM 4 - #define RGBLIGHT_EFFECT_BREATHING #define RGBLIGHT_EFFECT_RAINBOW_MOOD #define RGBLIGHT_EFFECT_RAINBOW_SWIRL diff --git a/keyboards/10bleoledhub/info.json b/keyboards/10bleoledhub/info.json index 9b536e0677..15d4702427 100644 --- a/keyboards/10bleoledhub/info.json +++ b/keyboards/10bleoledhub/info.json @@ -8,6 +8,9 @@ "pid": "0x7C99", "device_version": "0.0.1" }, + "rgblight": { + "led_count": 4 + }, "ws2812": { "pin": "B7" }, diff --git a/keyboards/1k/config.h b/keyboards/1k/config.h index afdc6d4baa..0d0cd3712a 100644 --- a/keyboards/1k/config.h +++ b/keyboards/1k/config.h @@ -15,8 +15,6 @@ */ #pragma once -#define RGBLED_NUM 1 - // Save as much space as we can... #define LAYER_STATE_8BIT #define NO_ACTION_LAYER diff --git a/keyboards/1k/info.json b/keyboards/1k/info.json index 090e93b94b..34f33d5059 100644 --- a/keyboards/1k/info.json +++ b/keyboards/1k/info.json @@ -8,6 +8,9 @@ "pid": "0x0001", "device_version": "0.0.1" }, + "rgblight": { + "led_count": 1 + }, "ws2812": { "pin": "B2" }, diff --git a/keyboards/1upkeyboards/1up60hse/config.h b/keyboards/1upkeyboards/1up60hse/config.h index bc0d7f0c4b..62c2837ebe 100644 --- a/keyboards/1upkeyboards/1up60hse/config.h +++ b/keyboards/1upkeyboards/1up60hse/config.h @@ -27,11 +27,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #define RGBLIGHT_EFFECT_RGB_TEST #define RGBLIGHT_EFFECT_ALTERNATING #define RGBLIGHT_EFFECT_TWINKLE -#define RGBLED_NUM 14 -#define RGBLIGHT_HUE_STEP 8 -#define RGBLIGHT_SAT_STEP 8 -#define RGBLIGHT_VAL_STEP 8 -#define RGBLIGHT_SLEEP /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ #define LOCKING_SUPPORT_ENABLE diff --git a/keyboards/1upkeyboards/1up60hse/info.json b/keyboards/1upkeyboards/1up60hse/info.json index 475a935123..cc0b9d1d7e 100644 --- a/keyboards/1upkeyboards/1up60hse/info.json +++ b/keyboards/1upkeyboards/1up60hse/info.json @@ -18,6 +18,12 @@ "levels": 5, "breathing": true }, + "rgblight": { + "saturation_steps": 8, + "brightness_steps": 8, + "led_count": 14, + "sleep": true + }, "ws2812": { "pin": "F0" }, diff --git a/keyboards/1upkeyboards/1up60hte/config.h b/keyboards/1upkeyboards/1up60hte/config.h index aeda8afd33..e0d482302d 100644 --- a/keyboards/1upkeyboards/1up60hte/config.h +++ b/keyboards/1upkeyboards/1up60hte/config.h @@ -34,7 +34,3 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #define RGBLIGHT_EFFECT_RGB_TEST #define RGBLIGHT_EFFECT_ALTERNATING #define RGBLIGHT_EFFECT_TWINKLE -#define RGBLED_NUM 14 -#define RGBLIGHT_HUE_STEP 8 -#define RGBLIGHT_SAT_STEP 8 -#define RGBLIGHT_VAL_STEP 8 diff --git a/keyboards/1upkeyboards/1up60hte/info.json b/keyboards/1upkeyboards/1up60hte/info.json index 712999df32..c1a8f48372 100644 --- a/keyboards/1upkeyboards/1up60hte/info.json +++ b/keyboards/1upkeyboards/1up60hte/info.json @@ -20,6 +20,11 @@ "caps_lock": "B6", "on_state": 0 }, + "rgblight": { + "saturation_steps": 8, + "brightness_steps": 8, + "led_count": 14 + }, "ws2812": { "pin": "F0" }, diff --git a/keyboards/1upkeyboards/1up60rgb/config.h b/keyboards/1upkeyboards/1up60rgb/config.h index 8bbb646e40..d702489ee7 100644 --- a/keyboards/1upkeyboards/1up60rgb/config.h +++ b/keyboards/1upkeyboards/1up60rgb/config.h @@ -16,7 +16,3 @@ #define RGBLIGHT_EFFECT_RGB_TEST #define RGBLIGHT_EFFECT_ALTERNATING #define RGBLIGHT_EFFECT_TWINKLE -#define RGBLED_NUM 16 -#define RGBLIGHT_HUE_STEP 8 -#define RGBLIGHT_SAT_STEP 8 -#define RGBLIGHT_VAL_STEP 8 diff --git a/keyboards/1upkeyboards/1up60rgb/info.json b/keyboards/1upkeyboards/1up60rgb/info.json index ee6914a4e5..0108b2e828 100644 --- a/keyboards/1upkeyboards/1up60rgb/info.json +++ b/keyboards/1upkeyboards/1up60rgb/info.json @@ -17,6 +17,11 @@ "pin": "B6", "levels": 5 }, + "rgblight": { + "saturation_steps": 8, + "brightness_steps": 8, + "led_count": 16 + }, "ws2812": { "pin": "E2" }, diff --git a/keyboards/1upkeyboards/1up60rgb/keymaps/default/keymap.c b/keyboards/1upkeyboards/1up60rgb/keymaps/default/keymap.c index 15b7c9faa7..5792f51ca8 100644 --- a/keyboards/1upkeyboards/1up60rgb/keymaps/default/keymap.c +++ b/keyboards/1upkeyboards/1up60rgb/keymaps/default/keymap.c @@ -18,12 +18,13 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { }; -void led_set_user(uint8_t usb_led) { - if (usb_led & (1 << USB_LED_CAPS_LOCK)) { +bool led_update_user(led_t led_state) { + if (led_state.caps_lock) { setPinOutput(B2); writePinLow(B2); } else { setPinInput(B2); writePinLow(B2); } + return false; } diff --git a/keyboards/1upkeyboards/1up60rgb/keymaps/iso/keymap.c b/keyboards/1upkeyboards/1up60rgb/keymaps/iso/keymap.c index fd6087a238..20783c22cb 100644 --- a/keyboards/1upkeyboards/1up60rgb/keymaps/iso/keymap.c +++ b/keyboards/1upkeyboards/1up60rgb/keymaps/iso/keymap.c @@ -18,12 +18,13 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { }; -void led_set_user(uint8_t usb_led) { - if (usb_led & (1 << USB_LED_CAPS_LOCK)) { +bool led_update_user(led_t led_state) { + if (led_state.caps_lock) { setPinOutput(B2); writePinLow(B2); } else { setPinInput(B2); writePinLow(B2); } + return false; } diff --git a/keyboards/1upkeyboards/1up60rgb/keymaps/raffle/keymap.c b/keyboards/1upkeyboards/1up60rgb/keymaps/raffle/keymap.c index d0c47c526d..453bf8c961 100644 --- a/keyboards/1upkeyboards/1up60rgb/keymaps/raffle/keymap.c +++ b/keyboards/1upkeyboards/1up60rgb/keymaps/raffle/keymap.c @@ -71,42 +71,12 @@ layer_state_t layer_state_set_user(layer_state_t state) { return update_tri_layer_state(state, _raise, _rgb, _adjust); } - -// scan matrix -void matrix_scan_user(void) { -} - // support for standard mod state keys (caps lock, scroll lock, etc.) -void led_set_user(uint8_t usb_led) { - - if (usb_led & (1 << USB_LED_NUM_LOCK)) { - - } else { - - } - - if (usb_led & (1 << USB_LED_CAPS_LOCK)) { +bool led_update_user(led_t led_state) { + if (led_state.caps_lock) { DDRB |= (1 << 2); PORTB &= ~(1 << 2); } else { DDRB &= ~(1 << 2); PORTB &= ~(1 << 2); } - - if (usb_led & (1 << USB_LED_SCROLL_LOCK)) { - - } else { - - } - - if (usb_led & (1 << USB_LED_COMPOSE)) { - - } else { - - } - - if (usb_led & (1 << USB_LED_KANA)) { - - } else { - - } - + return false; } diff --git a/keyboards/1upkeyboards/1up60rgb/keymaps/tsangan/keymap.c b/keyboards/1upkeyboards/1up60rgb/keymaps/tsangan/keymap.c index a45947de54..5cc9227885 100644 --- a/keyboards/1upkeyboards/1up60rgb/keymaps/tsangan/keymap.c +++ b/keyboards/1upkeyboards/1up60rgb/keymaps/tsangan/keymap.c @@ -18,12 +18,13 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { }; -void led_set_user(uint8_t usb_led) { - if (usb_led & (1 << USB_LED_CAPS_LOCK)) { +bool led_update_user(led_t led_state) { + if (led_state.caps_lock) { setPinOutput(B2); writePinLow(B2); } else { setPinInput(B2); writePinLow(B2); } + return false; } diff --git a/keyboards/1upkeyboards/pi60_hse/config.h b/keyboards/1upkeyboards/pi60_hse/config.h index 02100955e4..a47120f7d3 100644 --- a/keyboards/1upkeyboards/pi60_hse/config.h +++ b/keyboards/1upkeyboards/pi60_hse/config.h @@ -6,7 +6,6 @@ #define DYNAMIC_KEYMAP_LAYER_COUNT 10 #define RGB_MATRIX_LED_COUNT 16 -#define RGBLED_NUM 16 #define RGB_MATRIX_FRAMEBUFFER_EFFECTS #define RGB_MATRIX_KEYPRESSES #define RGB_DISABLE_WHEN_USB_SUSPENDED diff --git a/keyboards/1upkeyboards/super16/config.h b/keyboards/1upkeyboards/super16/config.h index 8102cbda4c..77548c9744 100644 --- a/keyboards/1upkeyboards/super16/config.h +++ b/keyboards/1upkeyboards/super16/config.h @@ -17,13 +17,8 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #pragma once -# define RGBLED_NUM 16 // Add 12 if attaching the RGB LED ring -# define RGB_MATRIX_LED_COUNT RGBLED_NUM +# define RGB_MATRIX_LED_COUNT 16 # ifdef RGBLIGHT_ENABLE -# define RGBLIGHT_HUE_STEP 8 -# define RGBLIGHT_SAT_STEP 8 -# define RGBLIGHT_VAL_STEP 8 -# define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */ # define RGBLIGHT_EFFECT_BREATHING # define RGBLIGHT_EFFECT_RAINBOW_MOOD # define RGBLIGHT_EFFECT_RAINBOW_SWIRL diff --git a/keyboards/1upkeyboards/super16/info.json b/keyboards/1upkeyboards/super16/info.json index 923f536ac8..7937eff8da 100644 --- a/keyboards/1upkeyboards/super16/info.json +++ b/keyboards/1upkeyboards/super16/info.json @@ -11,6 +11,12 @@ "ws2812": { "pin": "D3" }, + "rgblight": { + "saturation_steps": 8, + "brightness_steps": 8, + "led_count": 16, + "sleep": true + }, "rgb_matrix": { "driver": "WS2812" }, diff --git a/keyboards/1upkeyboards/sweet16/v1/config.h b/keyboards/1upkeyboards/sweet16/v1/config.h index bed2edc0a6..42c163a432 100644 --- a/keyboards/1upkeyboards/sweet16/v1/config.h +++ b/keyboards/1upkeyboards/sweet16/v1/config.h @@ -17,7 +17,3 @@ #define RGBLIGHT_EFFECT_RGB_TEST #define RGBLIGHT_EFFECT_ALTERNATING #define RGBLIGHT_EFFECT_TWINKLE -#define RGBLED_NUM 1 -#define RGBLIGHT_HUE_STEP 8 -#define RGBLIGHT_SAT_STEP 8 -#define RGBLIGHT_VAL_STEP 8 diff --git a/keyboards/1upkeyboards/sweet16/v1/info.json b/keyboards/1upkeyboards/sweet16/v1/info.json index cb82e7fcfb..ba7844015b 100644 --- a/keyboards/1upkeyboards/sweet16/v1/info.json +++ b/keyboards/1upkeyboards/sweet16/v1/info.json @@ -3,6 +3,11 @@ "pid": "0x0161", "device_version": "0.0.1" }, + "rgblight": { + "saturation_steps": 8, + "brightness_steps": 8, + "led_count": 1 + }, "ws2812": { "pin": "B1" }, diff --git a/keyboards/1upkeyboards/sweet16v2/kb2040/config.h b/keyboards/1upkeyboards/sweet16v2/kb2040/config.h index 88687335de..37a85b4711 100644 --- a/keyboards/1upkeyboards/sweet16v2/kb2040/config.h +++ b/keyboards/1upkeyboards/sweet16v2/kb2040/config.h @@ -19,7 +19,6 @@ #define DYNAMIC_KEYMAP_LAYER_COUNT 10 #define RGB_MATRIX_LED_COUNT 20 -#define RGBLED_NUM 20 #define RGB_MATRIX_KEYPRESSES #define RGB_MATRIX_FRAMEBUFFER_EFFECTS #define RGB_DISABLE_WHEN_USB_SUSPENDED diff --git a/keyboards/25keys/aleth42/rev0/config.h b/keyboards/25keys/aleth42/rev0/config.h index 2c3ca34c5e..8d9b7022b5 100644 --- a/keyboards/25keys/aleth42/rev0/config.h +++ b/keyboards/25keys/aleth42/rev0/config.h @@ -17,11 +17,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #pragma once - #define RGBLED_NUM 6 - #define RGBLIGHT_HUE_STEP 8 - #define RGBLIGHT_SAT_STEP 8 - #define RGBLIGHT_VAL_STEP 8 - #define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */ # define RGBLIGHT_EFFECT_BREATHING # define RGBLIGHT_EFFECT_RAINBOW_MOOD # define RGBLIGHT_EFFECT_RAINBOW_SWIRL diff --git a/keyboards/25keys/aleth42/rev0/info.json b/keyboards/25keys/aleth42/rev0/info.json index f3741a80b1..5232b7626a 100644 --- a/keyboards/25keys/aleth42/rev0/info.json +++ b/keyboards/25keys/aleth42/rev0/info.json @@ -13,6 +13,12 @@ {"pin_a": "B5", "pin_b": "B4"} ] }, + "rgblight": { + "saturation_steps": 8, + "brightness_steps": 8, + "led_count": 6, + "sleep": true + }, "ws2812": { "pin": "C7" }, diff --git a/keyboards/25keys/aleth42/rev1/config.h b/keyboards/25keys/aleth42/rev1/config.h index a97ab1ea49..8d9b7022b5 100644 --- a/keyboards/25keys/aleth42/rev1/config.h +++ b/keyboards/25keys/aleth42/rev1/config.h @@ -17,11 +17,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #pragma once - #define RGBLED_NUM 8 - #define RGBLIGHT_HUE_STEP 8 - #define RGBLIGHT_SAT_STEP 8 - #define RGBLIGHT_VAL_STEP 8 - #define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */ # define RGBLIGHT_EFFECT_BREATHING # define RGBLIGHT_EFFECT_RAINBOW_MOOD # define RGBLIGHT_EFFECT_RAINBOW_SWIRL diff --git a/keyboards/25keys/aleth42/rev1/info.json b/keyboards/25keys/aleth42/rev1/info.json index 5620203889..702e7af27c 100644 --- a/keyboards/25keys/aleth42/rev1/info.json +++ b/keyboards/25keys/aleth42/rev1/info.json @@ -13,6 +13,12 @@ {"pin_a": "F5", "pin_b": "F6"} ] }, + "rgblight": { + "saturation_steps": 8, + "brightness_steps": 8, + "led_count": 8, + "sleep": true + }, "ws2812": { "pin": "B3" }, diff --git a/keyboards/25keys/cassette42/config.h b/keyboards/25keys/cassette42/config.h index 07d9ab9b67..fa69a3dd58 100644 --- a/keyboards/25keys/cassette42/config.h +++ b/keyboards/25keys/cassette42/config.h @@ -17,11 +17,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #pragma once -# define RGBLED_NUM 5 -# define RGBLIGHT_HUE_STEP 8 -# define RGBLIGHT_SAT_STEP 8 -# define RGBLIGHT_VAL_STEP 8 -# define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */ # define RGBLIGHT_EFFECT_BREATHING # define RGBLIGHT_EFFECT_RAINBOW_MOOD # define RGBLIGHT_EFFECT_RAINBOW_SWIRL diff --git a/keyboards/25keys/cassette42/info.json b/keyboards/25keys/cassette42/info.json index 01701aedeb..e75214b662 100644 --- a/keyboards/25keys/cassette42/info.json +++ b/keyboards/25keys/cassette42/info.json @@ -14,6 +14,12 @@ {"pin_a": "B3", "pin_b": "B1"} ] }, + "rgblight": { + "saturation_steps": 8, + "brightness_steps": 8, + "led_count": 5, + "sleep": true + }, "ws2812": { "pin": "D3" }, diff --git a/keyboards/25keys/zinc/rev1/config.h b/keyboards/25keys/zinc/rev1/config.h index e4b0d02f75..27755e64c6 100644 --- a/keyboards/25keys/zinc/rev1/config.h +++ b/keyboards/25keys/zinc/rev1/config.h @@ -18,7 +18,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #pragma once #define QUICK_TAP_TERM 0 -#define TAPPING_TERM 100 /* Select hand configuration */ #define MASTER_LEFT diff --git a/keyboards/25keys/zinc/rev1/info.json b/keyboards/25keys/zinc/rev1/info.json index 46692f6e4d..47fb1f2e98 100644 --- a/keyboards/25keys/zinc/rev1/info.json +++ b/keyboards/25keys/zinc/rev1/info.json @@ -8,6 +8,12 @@ "split": { "soft_serial_pin": "D2" }, + "tapping": { + "term": 100 + }, + "rgblight": { + "hue_steps": 10 + }, "ws2812": { "pin": "D3" }, diff --git a/keyboards/25keys/zinc/rev1/post_config.h b/keyboards/25keys/zinc/rev1/post_config.h index 15857d3b0b..3d51de9e4c 100644 --- a/keyboards/25keys/zinc/rev1/post_config.h +++ b/keyboards/25keys/zinc/rev1/post_config.h @@ -34,7 +34,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #ifdef RGBLED_CONT #define RGBLED_NUM 60 #define RGBLED_SPLIT { 30, 30 } -// #define RGBLIGHT_LED_MAP {0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29} #else #define RGBLED_NUM 30 #endif @@ -72,8 +71,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #endif #define RGBLIGHT_VAL_STEP 4 #endif -#define RGBLIGHT_HUE_STEP 10 -#define RGBLIGHT_SAT_STEP 17 #if defined(RGBLIGHT_ENABLE) && !defined(IOS_DEVICE_ENABLE) // USB_MAX_POWER_CONSUMPTION value diff --git a/keyboards/25keys/zinc/reva/config.h b/keyboards/25keys/zinc/reva/config.h index e4b0d02f75..27755e64c6 100644 --- a/keyboards/25keys/zinc/reva/config.h +++ b/keyboards/25keys/zinc/reva/config.h @@ -18,7 +18,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #pragma once #define QUICK_TAP_TERM 0 -#define TAPPING_TERM 100 /* Select hand configuration */ #define MASTER_LEFT diff --git a/keyboards/25keys/zinc/reva/info.json b/keyboards/25keys/zinc/reva/info.json index 4db1d04910..1ab2fb7e38 100644 --- a/keyboards/25keys/zinc/reva/info.json +++ b/keyboards/25keys/zinc/reva/info.json @@ -8,6 +8,12 @@ "split": { "soft_serial_pin": "D2" }, + "tapping": { + "term": 100 + }, + "rgblight": { + "hue_steps": 10 + }, "ws2812": { "pin": "D3" }, diff --git a/keyboards/25keys/zinc/reva/post_config.h b/keyboards/25keys/zinc/reva/post_config.h index 15857d3b0b..3d51de9e4c 100644 --- a/keyboards/25keys/zinc/reva/post_config.h +++ b/keyboards/25keys/zinc/reva/post_config.h @@ -34,7 +34,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #ifdef RGBLED_CONT #define RGBLED_NUM 60 #define RGBLED_SPLIT { 30, 30 } -// #define RGBLIGHT_LED_MAP {0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29} #else #define RGBLED_NUM 30 #endif @@ -72,8 +71,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #endif #define RGBLIGHT_VAL_STEP 4 #endif -#define RGBLIGHT_HUE_STEP 10 -#define RGBLIGHT_SAT_STEP 17 #if defined(RGBLIGHT_ENABLE) && !defined(IOS_DEVICE_ENABLE) // USB_MAX_POWER_CONSUMPTION value diff --git a/keyboards/2key2crawl/config.h b/keyboards/2key2crawl/config.h index a4088e4925..b3548d696e 100644 --- a/keyboards/2key2crawl/config.h +++ b/keyboards/2key2crawl/config.h @@ -18,5 +18,4 @@ # define RGBLIGHT_EFFECT_RGB_TEST # define RGBLIGHT_EFFECT_ALTERNATING # define RGBLIGHT_EFFECT_TWINKLE -#define RGBLED_NUM 3 #endif diff --git a/keyboards/2key2crawl/info.json b/keyboards/2key2crawl/info.json index 1752531ba1..66636b4a3c 100644 --- a/keyboards/2key2crawl/info.json +++ b/keyboards/2key2crawl/info.json @@ -18,6 +18,9 @@ {"pin_a": "D0", "pin_b": "D1", "resolution": 1} ] }, + "rgblight": { + "led_count": 3 + }, "ws2812": { "pin": "C6" }, diff --git a/keyboards/40percentclub/gherkin/keymaps/default/keymap.c b/keyboards/40percentclub/gherkin/keymaps/default/keymap.c index ab2a1fa1c1..f4d3032857 100644 --- a/keyboards/40percentclub/gherkin/keymaps/default/keymap.c +++ b/keyboards/40percentclub/gherkin/keymaps/default/keymap.c @@ -59,16 +59,17 @@ void keyboard_pre_init_user(void) { setPinOutput(B0); } -void led_set_user(uint8_t usb_led) { - if (IS_LED_ON(usb_led, USB_LED_NUM_LOCK)) { +bool led_update_user(led_t led_state) { + if (led_state.num_lock) { writePinLow(D5); } else { writePinHigh(D5); } - if (IS_LED_ON(usb_led, USB_LED_CAPS_LOCK)) { + if (led_state.caps_lock) { writePinLow(B0); } else { writePinHigh(B0); } + return false; } diff --git a/keyboards/40percentclub/gherkin/keymaps/mjt/keymap.c b/keyboards/40percentclub/gherkin/keymaps/mjt/keymap.c index 40c11739fb..090fd1d296 100644 --- a/keyboards/40percentclub/gherkin/keymaps/mjt/keymap.c +++ b/keyboards/40percentclub/gherkin/keymaps/mjt/keymap.c @@ -199,9 +199,6 @@ void music_scale_user(void) #endif -void matrix_scan_user(void) { -} - //Tap Dance Definitions tap_dance_action_t tap_dance_actions[] = { //Tap once for Esc, twice for Caps Lock @@ -211,40 +208,3 @@ tap_dance_action_t tap_dance_actions[] = { [TD_A_TAB] = ACTION_TAP_DANCE_DOUBLE(KC_A, KC_TAB), [TD_Q_ESC] = ACTION_TAP_DANCE_DOUBLE(KC_Q, KC_ESC) }; - -// don't know what this is doing... -/* -void led_set_user(uint8_t usb_led) { - - if (usb_led & (1 << USB_LED_NUM_LOCK)) { - DDRD |= (1 << 5); PORTD &= ~(1 << 5); - } else { - DDRD &= ~(1 << 5); PORTD &= ~(1 << 5); - } - - if (usb_led & (1 << USB_LED_CAPS_LOCK)) { - DDRB |= (1 << 0); PORTB &= ~(1 << 0); - } else { - DDRB &= ~(1 << 0); PORTB &= ~(1 << 0); - } - - if (usb_led & (1 << USB_LED_SCROLL_LOCK)) { - - } else { - - } - - if (usb_led & (1 << USB_LED_COMPOSE)) { - - } else { - - } - - if (usb_led & (1 << USB_LED_KANA)) { - - } else { - - } - -} -*/ diff --git a/keyboards/40percentclub/luddite/config.h b/keyboards/40percentclub/luddite/config.h index e388bc9705..06570c9ce9 100644 --- a/keyboards/40percentclub/luddite/config.h +++ b/keyboards/40percentclub/luddite/config.h @@ -17,7 +17,3 @@ # define RGBLIGHT_EFFECT_RGB_TEST # define RGBLIGHT_EFFECT_ALTERNATING # define RGBLIGHT_EFFECT_TWINKLE -#define RGBLED_NUM 8 // Number of LEDs -// #define RGBLIGHT_HUE_STEP 10 -// #define RGBLIGHT_SAT_STEP 17 -// #define RGBLIGHT_VAL_STEP 17 diff --git a/keyboards/40percentclub/luddite/info.json b/keyboards/40percentclub/luddite/info.json index eb5c0e4a9d..9ee787ad63 100644 --- a/keyboards/40percentclub/luddite/info.json +++ b/keyboards/40percentclub/luddite/info.json @@ -17,6 +17,9 @@ "pin": "B5", "levels": 4 }, + "rgblight": { + "led_count": 8 + }, "ws2812": { "pin": "B4" }, diff --git a/keyboards/40percentclub/mf68/keymaps/delivrance/keymap.c b/keyboards/40percentclub/mf68/keymaps/delivrance/keymap.c index c3e359e24e..f7899ad886 100644 --- a/keyboards/40percentclub/mf68/keymaps/delivrance/keymap.c +++ b/keyboards/40percentclub/mf68/keymaps/delivrance/keymap.c @@ -157,11 +157,11 @@ void dynamic_macro_record_end_user(int8_t direction) { // Custom Caps Lock backlight behaviour // ------------------------------------ -void led_set_user(uint8_t usb_led) { +bool led_update_user(led_t led_state) { // This exists because I don't like the backlight to turn OFF when the Caps Lock is ON. // That is, this will turn the backlight ON (at half the brightness) when the Caps Lock is ON as well. static bool prev_is_caps_on; - bool is_caps_on = IS_LED_ON(usb_led, USB_LED_CAPS_LOCK); + bool is_caps_on = led_state.caps_lock; if (prev_is_caps_on != is_caps_on) { prev_is_caps_on = is_caps_on; @@ -178,7 +178,7 @@ void led_set_user(uint8_t usb_led) { } // Turn on the Pro Micro's on-board LEDs for Caps Lock - if (IS_LED_ON(usb_led, USB_LED_CAPS_LOCK)) { + if (led_state.caps_lock) { // Set to low setPinOutput(B0); writePinLow(B0); @@ -189,6 +189,7 @@ void led_set_user(uint8_t usb_led) { setPinInput(B0); setPinInput(D5); } + return false; } // Backlight idle timeout feature diff --git a/keyboards/40percentclub/mf68/keymaps/emdarcher/keymap.c b/keyboards/40percentclub/mf68/keymaps/emdarcher/keymap.c index ea659979ea..3932a1ee9b 100644 --- a/keyboards/40percentclub/mf68/keymaps/emdarcher/keymap.c +++ b/keyboards/40percentclub/mf68/keymaps/emdarcher/keymap.c @@ -35,11 +35,9 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { ) }; - - -void led_set_user(uint8_t usb_led){ +bool led_update_user(led_t led_state){ //turn on the Pro Micro's on board LEDs for CAPS LOCK - if(IS_LED_ON(usb_led, USB_LED_CAPS_LOCK)){ + if(led_state.caps_lock){ //set led pins to low setPinOutput(B0); writePinLow(B0); @@ -50,4 +48,5 @@ void led_set_user(uint8_t usb_led){ setPinInput(B0); setPinInput(D5); } + return false; } diff --git a/keyboards/40percentclub/nano/config.h b/keyboards/40percentclub/nano/config.h index 8641d6a37f..3e8f6e666b 100644 --- a/keyboards/40percentclub/nano/config.h +++ b/keyboards/40percentclub/nano/config.h @@ -28,4 +28,3 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. # define RGBLIGHT_EFFECT_RGB_TEST # define RGBLIGHT_EFFECT_ALTERNATING # define RGBLIGHT_EFFECT_TWINKLE -#define RGBLED_NUM 6 // Number of LEDs diff --git a/keyboards/40percentclub/nano/info.json b/keyboards/40percentclub/nano/info.json index 21e5c2d1d2..5ad37b00b5 100644 --- a/keyboards/40percentclub/nano/info.json +++ b/keyboards/40percentclub/nano/info.json @@ -8,6 +8,9 @@ "pid": "0x0007", "device_version": "0.0.1" }, + "rgblight": { + "led_count": 6 + }, "ws2812": { "pin": "D3" }, diff --git a/keyboards/40percentclub/nori/config.h b/keyboards/40percentclub/nori/config.h index 57981dd27f..6d4f10af71 100644 --- a/keyboards/40percentclub/nori/config.h +++ b/keyboards/40percentclub/nori/config.h @@ -27,10 +27,6 @@ #define RGBLIGHT_EFFECT_RGB_TEST #define RGBLIGHT_EFFECT_ALTERNATING #define RGBLIGHT_EFFECT_TWINKLE -#define RGBLED_NUM 10 -#define RGBLIGHT_HUE_STEP 8 -#define RGBLIGHT_SAT_STEP 8 -#define RGBLIGHT_VAL_STEP 8 /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ #define LOCKING_SUPPORT_ENABLE diff --git a/keyboards/40percentclub/nori/info.json b/keyboards/40percentclub/nori/info.json index b58ee84edc..dfd2c310bb 100644 --- a/keyboards/40percentclub/nori/info.json +++ b/keyboards/40percentclub/nori/info.json @@ -16,6 +16,11 @@ "backlight": { "pin": "B5" }, + "rgblight": { + "saturation_steps": 8, + "brightness_steps": 8, + "led_count": 10 + }, "ws2812": { "pin": "B4" }, diff --git a/keyboards/40percentclub/tomato/config.h b/keyboards/40percentclub/tomato/config.h index 2199981c7c..37576953de 100644 --- a/keyboards/40percentclub/tomato/config.h +++ b/keyboards/40percentclub/tomato/config.h @@ -17,7 +17,3 @@ #define RGBLIGHT_EFFECT_RGB_TEST #define RGBLIGHT_EFFECT_ALTERNATING #define RGBLIGHT_EFFECT_TWINKLE -#define RGBLED_NUM 30 -#define RGBLIGHT_HUE_STEP 8 -#define RGBLIGHT_SAT_STEP 8 -#define RGBLIGHT_VAL_STEP 8 diff --git a/keyboards/40percentclub/tomato/info.json b/keyboards/40percentclub/tomato/info.json index c881f7c7d1..89c0f7b367 100644 --- a/keyboards/40percentclub/tomato/info.json +++ b/keyboards/40percentclub/tomato/info.json @@ -8,6 +8,11 @@ "pid": "0x546F", "device_version": "0.0.1" }, + "rgblight": { + "saturation_steps": 8, + "brightness_steps": 8, + "led_count": 30 + }, "ws2812": { "pin": "B5" }, diff --git a/keyboards/40percentclub/ut47/led.c b/keyboards/40percentclub/ut47/led.c index f5d8ffc12e..867a6e2e2a 100644 --- a/keyboards/40percentclub/ut47/led.c +++ b/keyboards/40percentclub/ut47/led.c @@ -19,20 +19,23 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #include <stdint.h> #include "led.h" - -void led_set(uint8_t usb_led) +bool led_update_kb(led_t led_state) { - if (usb_led & (1<<USB_LED_CAPS_LOCK)) { - // output low - DDRB |= (1<<0); - PORTB &= ~(1<<0); - DDRD |= (1<<5); - PORTD &= ~(1<<5); - } else { - // Hi-Z - DDRB &= ~(1<<0); - PORTB &= ~(1<<0); - DDRD &= ~(1<<5); - PORTD &= ~(1<<5); + bool res = led_update_user(led_state); + if (res) { + if (led_state.caps_lock) { + // output low + DDRB |= (1<<0); + PORTB &= ~(1<<0); + DDRD |= (1<<5); + PORTD &= ~(1<<5); + } else { + // Hi-Z + DDRB &= ~(1<<0); + PORTB &= ~(1<<0); + DDRD &= ~(1<<5); + PORTD &= ~(1<<5); + } } + return false; } diff --git a/keyboards/4pplet/aekiso60/rev_a/config.h b/keyboards/4pplet/aekiso60/rev_a/config.h index 4ec3391a61..a0f3c01aa3 100644 --- a/keyboards/4pplet/aekiso60/rev_a/config.h +++ b/keyboards/4pplet/aekiso60/rev_a/config.h @@ -1,10 +1,5 @@ #pragma once -#define RGBLED_NUM 12 - -#define RGBLIGHT_HUE_STEP 8 -#define RGBLIGHT_SAT_STEP 8 -#define RGBLIGHT_VAL_STEP 8 #define RGBLIGHT_EFFECT_BREATHING #define RGBLIGHT_EFFECT_RAINBOW_MOOD #define RGBLIGHT_EFFECT_RAINBOW_SWIRL diff --git a/keyboards/4pplet/aekiso60/rev_a/info.json b/keyboards/4pplet/aekiso60/rev_a/info.json index cbcf0f5997..32e6378cfc 100644 --- a/keyboards/4pplet/aekiso60/rev_a/info.json +++ b/keyboards/4pplet/aekiso60/rev_a/info.json @@ -4,6 +4,11 @@ "pid": "0x0001", "device_version": "0.0.1" }, + "rgblight": { + "saturation_steps": 8, + "brightness_steps": 8, + "led_count": 12 + }, "ws2812": { "pin": "D3" }, diff --git a/keyboards/4pplet/aekiso60/rev_b/config.h b/keyboards/4pplet/aekiso60/rev_b/config.h index e6f7c748a5..c96bd9d192 100644 --- a/keyboards/4pplet/aekiso60/rev_b/config.h +++ b/keyboards/4pplet/aekiso60/rev_b/config.h @@ -16,11 +16,7 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. */ #pragma once -#define RGBLED_NUM 12 #define WS2812_EXTERNAL_PULLUP -#define RGBLIGHT_HUE_STEP 8 -#define RGBLIGHT_SAT_STEP 8 -#define RGBLIGHT_VAL_STEP 8 #define RGBLIGHT_EFFECT_BREATHING #define RGBLIGHT_EFFECT_RAINBOW_MOOD #define RGBLIGHT_EFFECT_RAINBOW_SWIRL diff --git a/keyboards/4pplet/aekiso60/rev_b/info.json b/keyboards/4pplet/aekiso60/rev_b/info.json index 4e218f9365..a927a3e271 100644 --- a/keyboards/4pplet/aekiso60/rev_b/info.json +++ b/keyboards/4pplet/aekiso60/rev_b/info.json @@ -4,6 +4,11 @@ "pid": "0x0011", "device_version": "0.0.2" }, + "rgblight": { + "saturation_steps": 8, + "brightness_steps": 8, + "led_count": 12 + }, "ws2812": { "pin": "A8" }, diff --git a/keyboards/4pplet/aekiso60/rev_b/rules.mk b/keyboards/4pplet/aekiso60/rev_b/rules.mk index 041df45eca..e539634d58 100644 --- a/keyboards/4pplet/aekiso60/rev_b/rules.mk +++ b/keyboards/4pplet/aekiso60/rev_b/rules.mk @@ -14,5 +14,3 @@ AUDIO_ENABLE = no # Audio output # Wildcard to allow APM32 MCU DFU_SUFFIX_ARGS = -p FFFF -v FFFF -# Enter lower-power sleep mode when on the ChibiOS idle thread -OPT_DEFS += -DCORTEX_ENABLE_WFI_IDLE=TRUE diff --git a/keyboards/4pplet/eagle_viper_rep/rev_a/config.h b/keyboards/4pplet/eagle_viper_rep/rev_a/config.h index 6114950220..ddd59434a4 100644 --- a/keyboards/4pplet/eagle_viper_rep/rev_a/config.h +++ b/keyboards/4pplet/eagle_viper_rep/rev_a/config.h @@ -25,10 +25,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #define WS2812_SPI_MOSI_PAL_MODE 0 #define WS2812_SPI_SCK_PIN A5 #define WS2812_SPI_SCK_PAL_MODE 0 -#define RGBLED_NUM 16 -#define RGBLIGHT_HUE_STEP 8 -#define RGBLIGHT_SAT_STEP 8 -#define RGBLIGHT_VAL_STEP 8 #define RGBLIGHT_EFFECT_BREATHING #define RGBLIGHT_EFFECT_RAINBOW_MOOD #define RGBLIGHT_EFFECT_RAINBOW_SWIRL diff --git a/keyboards/4pplet/eagle_viper_rep/rev_a/info.json b/keyboards/4pplet/eagle_viper_rep/rev_a/info.json index 02d4f38632..9a112a2cde 100644 --- a/keyboards/4pplet/eagle_viper_rep/rev_a/info.json +++ b/keyboards/4pplet/eagle_viper_rep/rev_a/info.json @@ -18,6 +18,11 @@ "levels": 10, "breathing": true }, + "rgblight": { + "saturation_steps": 8, + "brightness_steps": 8, + "led_count": 16 + }, "ws2812": { "pin": "A7", "driver": "spi" diff --git a/keyboards/4pplet/eagle_viper_rep/rev_a/rules.mk b/keyboards/4pplet/eagle_viper_rep/rev_a/rules.mk index 4e3e37ff3d..30a36865b9 100644 --- a/keyboards/4pplet/eagle_viper_rep/rev_a/rules.mk +++ b/keyboards/4pplet/eagle_viper_rep/rev_a/rules.mk @@ -13,5 +13,3 @@ RGBLIGHT_ENABLE = yes # Wildcard to allow APM32 MCU DFU_SUFFIX_ARGS = -p FFFF -v FFFF -# Enter lower-power sleep mode when on the ChibiOS idle thread -OPT_DEFS += -DCORTEX_ENABLE_WFI_IDLE=TRUE diff --git a/keyboards/4pplet/eagle_viper_rep/rev_b/config.h b/keyboards/4pplet/eagle_viper_rep/rev_b/config.h index 7c8c8a8cf2..9a5de0dd6f 100644 --- a/keyboards/4pplet/eagle_viper_rep/rev_b/config.h +++ b/keyboards/4pplet/eagle_viper_rep/rev_b/config.h @@ -21,12 +21,8 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #define BACKLIGHT_PAL_MODE 1 /* Underglow */ -#define RGBLED_NUM 16 #define WS2812_EXTERNAL_PULLUP -#define RGBLIGHT_HUE_STEP 8 -#define RGBLIGHT_SAT_STEP 8 -#define RGBLIGHT_VAL_STEP 8 #define RGBLIGHT_EFFECT_BREATHING #define RGBLIGHT_EFFECT_RAINBOW_MOOD #define RGBLIGHT_EFFECT_RAINBOW_SWIRL diff --git a/keyboards/4pplet/eagle_viper_rep/rev_b/info.json b/keyboards/4pplet/eagle_viper_rep/rev_b/info.json index 73a2053979..d260e76c81 100644 --- a/keyboards/4pplet/eagle_viper_rep/rev_b/info.json +++ b/keyboards/4pplet/eagle_viper_rep/rev_b/info.json @@ -23,6 +23,11 @@ "num_lock": "B12", "scroll_lock": "B13" }, + "rgblight": { + "saturation_steps": 8, + "brightness_steps": 8, + "led_count": 16 + }, "ws2812": { "pin": "A8" }, diff --git a/keyboards/4pplet/eagle_viper_rep/rev_b/rules.mk b/keyboards/4pplet/eagle_viper_rep/rev_b/rules.mk index 09e14f7540..428a48c464 100644 --- a/keyboards/4pplet/eagle_viper_rep/rev_b/rules.mk +++ b/keyboards/4pplet/eagle_viper_rep/rev_b/rules.mk @@ -13,5 +13,3 @@ RGBLIGHT_ENABLE = yes # Wildcard to allow APM32 MCU DFU_SUFFIX_ARGS = -p FFFF -v FFFF -# Enter lower-power sleep mode when on the ChibiOS idle thread -OPT_DEFS += -DCORTEX_ENABLE_WFI_IDLE=TRUE diff --git a/keyboards/4pplet/perk60_iso/rev_a/rules.mk b/keyboards/4pplet/perk60_iso/rev_a/rules.mk index d89fef7194..6a7da3e998 100644 --- a/keyboards/4pplet/perk60_iso/rev_a/rules.mk +++ b/keyboards/4pplet/perk60_iso/rev_a/rules.mk @@ -12,5 +12,3 @@ RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow AUDIO_ENABLE = no # Audio output RGB_MATRIX_ENABLE = yes -# Enter lower-power sleep mode when on the ChibiOS idle thread -OPT_DEFS += -DCORTEX_ENABLE_WFI_IDLE=TRUE diff --git a/keyboards/4pplet/steezy60/rev_b/rules.mk b/keyboards/4pplet/steezy60/rev_b/rules.mk index 68bddfc748..3787d8c241 100644 --- a/keyboards/4pplet/steezy60/rev_b/rules.mk +++ b/keyboards/4pplet/steezy60/rev_b/rules.mk @@ -6,5 +6,3 @@ KEY_LOCK_ENABLE = yes # Wildcard to allow APM32 MCU DFU_SUFFIX_ARGS = -p FFFF -v FFFF -# Enter lower-power sleep mode when on the ChibiOS idle thread -OPT_DEFS += -DCORTEX_ENABLE_WFI_IDLE=TRUE diff --git a/keyboards/4pplet/unextended_std/rev_a/rules.mk b/keyboards/4pplet/unextended_std/rev_a/rules.mk index 68bddfc748..3787d8c241 100644 --- a/keyboards/4pplet/unextended_std/rev_a/rules.mk +++ b/keyboards/4pplet/unextended_std/rev_a/rules.mk @@ -6,5 +6,3 @@ KEY_LOCK_ENABLE = yes # Wildcard to allow APM32 MCU DFU_SUFFIX_ARGS = -p FFFF -v FFFF -# Enter lower-power sleep mode when on the ChibiOS idle thread -OPT_DEFS += -DCORTEX_ENABLE_WFI_IDLE=TRUE diff --git a/keyboards/4pplet/waffling60/rev_b/config.h b/keyboards/4pplet/waffling60/rev_b/config.h index 2552b1e451..189e53b8c1 100644 --- a/keyboards/4pplet/waffling60/rev_b/config.h +++ b/keyboards/4pplet/waffling60/rev_b/config.h @@ -16,11 +16,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. */ #pragma once -#define RGBLED_NUM 1 - -#define RGBLIGHT_HUE_STEP 8 -#define RGBLIGHT_SAT_STEP 8 -#define RGBLIGHT_VAL_STEP 8 #define RGBLIGHT_EFFECT_BREATHING #define RGBLIGHT_EFFECT_RAINBOW_MOOD #define RGBLIGHT_EFFECT_RAINBOW_SWIRL diff --git a/keyboards/4pplet/waffling60/rev_b/info.json b/keyboards/4pplet/waffling60/rev_b/info.json index 90fe5d02a2..2d22a82b85 100644 --- a/keyboards/4pplet/waffling60/rev_b/info.json +++ b/keyboards/4pplet/waffling60/rev_b/info.json @@ -8,6 +8,11 @@ "pid": "0x0005", "device_version": "0.0.2" }, + "rgblight": { + "saturation_steps": 8, + "brightness_steps": 8, + "led_count": 1 + }, "ws2812": { "pin": "D3" }, diff --git a/keyboards/4pplet/waffling60/rev_c/config.h b/keyboards/4pplet/waffling60/rev_c/config.h index 06e5db9090..27246c865e 100644 --- a/keyboards/4pplet/waffling60/rev_c/config.h +++ b/keyboards/4pplet/waffling60/rev_c/config.h @@ -16,11 +16,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. */ #pragma once -#define RGBLED_NUM 1 - -#define RGBLIGHT_HUE_STEP 8 -#define RGBLIGHT_SAT_STEP 8 -#define RGBLIGHT_VAL_STEP 8 #define RGBLIGHT_EFFECT_BREATHING #define RGBLIGHT_EFFECT_RAINBOW_MOOD #define RGBLIGHT_EFFECT_RAINBOW_SWIRL diff --git a/keyboards/4pplet/waffling60/rev_c/info.json b/keyboards/4pplet/waffling60/rev_c/info.json index c33d2b0616..b4a0046728 100644 --- a/keyboards/4pplet/waffling60/rev_c/info.json +++ b/keyboards/4pplet/waffling60/rev_c/info.json @@ -12,6 +12,11 @@ "cols": ["C4", "C5", "D2", "C6", "C7", "B7", "B6", "B5", "B4", "B3", "B2", "B1", "D1", "D4"], "rows": ["C2", "D0", "B0", "D6", "D5"] }, + "rgblight": { + "saturation_steps": 8, + "brightness_steps": 8, + "led_count": 1 + }, "ws2812": { "pin": "D3" }, diff --git a/keyboards/4pplet/waffling60/rev_d/config.h b/keyboards/4pplet/waffling60/rev_d/config.h index 2ba774712a..036d08cc73 100644 --- a/keyboards/4pplet/waffling60/rev_d/config.h +++ b/keyboards/4pplet/waffling60/rev_d/config.h @@ -16,9 +16,4 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. */ #pragma once -#define RGBLED_NUM 1 #define WS2812_EXTERNAL_PULLUP - -#define RGBLIGHT_HUE_STEP 8 -#define RGBLIGHT_SAT_STEP 8 -#define RGBLIGHT_VAL_STEP 8 diff --git a/keyboards/4pplet/waffling60/rev_d/info.json b/keyboards/4pplet/waffling60/rev_d/info.json index 01aba22863..692f995605 100644 --- a/keyboards/4pplet/waffling60/rev_d/info.json +++ b/keyboards/4pplet/waffling60/rev_d/info.json @@ -8,6 +8,11 @@ "pid": "0x000E", "device_version": "0.0.4" }, + "rgblight": { + "saturation_steps": 8, + "brightness_steps": 8, + "led_count": 1 + }, "ws2812": { "pin": "A8" }, diff --git a/keyboards/4pplet/waffling60/rev_d/rules.mk b/keyboards/4pplet/waffling60/rev_d/rules.mk index 041df45eca..e539634d58 100644 --- a/keyboards/4pplet/waffling60/rev_d/rules.mk +++ b/keyboards/4pplet/waffling60/rev_d/rules.mk @@ -14,5 +14,3 @@ AUDIO_ENABLE = no # Audio output # Wildcard to allow APM32 MCU DFU_SUFFIX_ARGS = -p FFFF -v FFFF -# Enter lower-power sleep mode when on the ChibiOS idle thread -OPT_DEFS += -DCORTEX_ENABLE_WFI_IDLE=TRUE diff --git a/keyboards/4pplet/waffling60/rev_d_ansi/rules.mk b/keyboards/4pplet/waffling60/rev_d_ansi/rules.mk index 5192065644..a64bf928eb 100644 --- a/keyboards/4pplet/waffling60/rev_d_ansi/rules.mk +++ b/keyboards/4pplet/waffling60/rev_d_ansi/rules.mk @@ -14,5 +14,3 @@ AUDIO_ENABLE = no # Audio output # Wildcard to allow APM32 MCU DFU_SUFFIX_ARGS = -p FFFF -v FFFF -# Enter lower-power sleep mode when on the ChibiOS idle thread -OPT_DEFS += -DCORTEX_ENABLE_WFI_IDLE=TRUE diff --git a/keyboards/4pplet/waffling60/rev_d_iso/rules.mk b/keyboards/4pplet/waffling60/rev_d_iso/rules.mk index e8184d57ab..e11c916b4f 100644 --- a/keyboards/4pplet/waffling60/rev_d_iso/rules.mk +++ b/keyboards/4pplet/waffling60/rev_d_iso/rules.mk @@ -14,5 +14,3 @@ AUDIO_ENABLE = no # Audio output # Wildcard to allow APM32 MCU DFU_SUFFIX_ARGS = -p FFFF -v FFFF -# Enter lower-power sleep mode when on the ChibiOS idle thread -OPT_DEFS += -DCORTEX_ENABLE_WFI_IDLE=TRUE diff --git a/keyboards/4pplet/waffling80/rev_a/config.h b/keyboards/4pplet/waffling80/rev_a/config.h deleted file mode 100644 index e42bb68b37..0000000000 --- a/keyboards/4pplet/waffling80/rev_a/config.h +++ /dev/null @@ -1,23 +0,0 @@ -/* -Copyright 2022 Stefan Sundin "4pplet" <mail@4pplet.com> - -This program is free software: you can redistribute it and/or modify -it under the terms of the GNU General Public License as published by -the Free Software Foundation, either version 2 of the License, or -(at your option) any later version. - -This program is distributed in the hope that it will be useful, -but WITHOUT ANY WARRANTY; without even the implied warranty of -MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -GNU General Public License for more details. - -You should have received a copy of the GNU General Public License -along with this program. If not, see <http://www.gnu.org/licenses/>. -*/ -#pragma once - -#define RGBLED_NUM 2 - -#define RGBLIGHT_HUE_STEP 8 -#define RGBLIGHT_SAT_STEP 8 -#define RGBLIGHT_VAL_STEP 8 diff --git a/keyboards/4pplet/waffling80/rev_a/info.json b/keyboards/4pplet/waffling80/rev_a/info.json index 34ec33bbe2..8c3a84be1e 100644 --- a/keyboards/4pplet/waffling80/rev_a/info.json +++ b/keyboards/4pplet/waffling80/rev_a/info.json @@ -4,6 +4,11 @@ "pid": "0x0006", "device_version": "0.0.1" }, + "rgblight": { + "saturation_steps": 8, + "brightness_steps": 8, + "led_count": 2 + }, "ws2812": { "pin": "D7" }, diff --git a/keyboards/4pplet/waffling80/rev_b/config.h b/keyboards/4pplet/waffling80/rev_b/config.h index 1bf561d74a..036d08cc73 100644 --- a/keyboards/4pplet/waffling80/rev_b/config.h +++ b/keyboards/4pplet/waffling80/rev_b/config.h @@ -16,9 +16,4 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. */ #pragma once -#define RGBLED_NUM 2 #define WS2812_EXTERNAL_PULLUP - -#define RGBLIGHT_HUE_STEP 8 -#define RGBLIGHT_SAT_STEP 8 -#define RGBLIGHT_VAL_STEP 8 diff --git a/keyboards/4pplet/waffling80/rev_b/info.json b/keyboards/4pplet/waffling80/rev_b/info.json index 61673e609d..47d3d5d662 100644 --- a/keyboards/4pplet/waffling80/rev_b/info.json +++ b/keyboards/4pplet/waffling80/rev_b/info.json @@ -4,6 +4,11 @@ "pid": "0x000F", "device_version": "0.0.2" }, + "rgblight": { + "saturation_steps": 8, + "brightness_steps": 8, + "led_count": 2 + }, "ws2812": { "pin": "A8" }, diff --git a/keyboards/4pplet/waffling80/rev_b/rules.mk b/keyboards/4pplet/waffling80/rev_b/rules.mk index 041df45eca..e539634d58 100644 --- a/keyboards/4pplet/waffling80/rev_b/rules.mk +++ b/keyboards/4pplet/waffling80/rev_b/rules.mk @@ -14,5 +14,3 @@ AUDIO_ENABLE = no # Audio output # Wildcard to allow APM32 MCU DFU_SUFFIX_ARGS = -p FFFF -v FFFF -# Enter lower-power sleep mode when on the ChibiOS idle thread -OPT_DEFS += -DCORTEX_ENABLE_WFI_IDLE=TRUE diff --git a/keyboards/4pplet/yakiimo/rev_a/rules.mk b/keyboards/4pplet/yakiimo/rev_a/rules.mk index 9e42693cb6..c3b8e77d77 100644 --- a/keyboards/4pplet/yakiimo/rev_a/rules.mk +++ b/keyboards/4pplet/yakiimo/rev_a/rules.mk @@ -11,5 +11,3 @@ BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow AUDIO_ENABLE = no # Audio output -# Enter lower-power sleep mode when on the ChibiOS idle thread -OPT_DEFS += -DCORTEX_ENABLE_WFI_IDLE=TRUE diff --git a/keyboards/7c8/framework/config.h b/keyboards/7c8/framework/config.h deleted file mode 100644 index f6b4b30cf5..0000000000 --- a/keyboards/7c8/framework/config.h +++ /dev/null @@ -1,22 +0,0 @@ -/* Copyright 2020 Steven Nguyen - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see <http://www.gnu.org/licenses/>. - */ - -#pragma once - -#define TAP_CODE_DELAY 16 - -#define LEADER_TIMEOUT 250 -#define LEADER_PER_KEY_TIMING 150 diff --git a/keyboards/7c8/framework/info.json b/keyboards/7c8/framework/info.json index 18c0289c9a..19325af9cb 100644 --- a/keyboards/7c8/framework/info.json +++ b/keyboards/7c8/framework/info.json @@ -18,6 +18,13 @@ {"pin_a": "D0", "pin_b": "D1"} ] }, + "qmk": { + "tap_keycode_delay": 16 + }, + "leader_key": { + "timeout": 250, + "timing": true + }, "processor": "atmega328p", "bootloader": "usbasploader", "layouts": { diff --git a/keyboards/8pack/config.h b/keyboards/8pack/config.h index 5139d4cf69..e48b4d5a72 100644 --- a/keyboards/8pack/config.h +++ b/keyboards/8pack/config.h @@ -7,7 +7,6 @@ #define LOCKING_RESYNC_ENABLE // ws2812 options -#define RGBLED_NUM 8 // number of LEDs #define RGBLIGHT_EFFECT_BREATHING #define RGBLIGHT_EFFECT_RAINBOW_MOOD #define RGBLIGHT_EFFECT_RAINBOW_SWIRL diff --git a/keyboards/8pack/info.json b/keyboards/8pack/info.json index 45dec97b33..fffac7d426 100644 --- a/keyboards/8pack/info.json +++ b/keyboards/8pack/info.json @@ -11,6 +11,9 @@ "pins": ["D1", "D0", "D4", "C6", "D7", "E6", "B4", "B5"], "levels": 8 }, + "rgblight": { + "led_count": 8 + }, "ws2812": { "pin": "D2" }, diff --git a/keyboards/9key/config.h b/keyboards/9key/config.h deleted file mode 100644 index bb910a4427..0000000000 --- a/keyboards/9key/config.h +++ /dev/null @@ -1,22 +0,0 @@ -/* -Copyright 2012 Jun Wako <wakojun@gmail.com> - -This program is free software: you can redistribute it and/or modify -it under the terms of the GNU General Public License as published by -the Free Software Foundation, either version 2 of the License, or -(at your option) any later version. - -This program is distributed in the hope that it will be useful, -but WITHOUT ANY WARRANTY; without even the implied warranty of -MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -GNU General Public License for more details. - -You should have received a copy of the GNU General Public License -along with this program. If not, see <http://www.gnu.org/licenses/>. -*/ - -#pragma once - -#define RGBLED_NUM 1 // Number of LEDs - -#define TAPPING_TERM 200 diff --git a/keyboards/9key/info.json b/keyboards/9key/info.json index 1dc9fad41a..d4061d8261 100644 --- a/keyboards/9key/info.json +++ b/keyboards/9key/info.json @@ -8,6 +8,9 @@ "pid": "0x0007", "device_version": "0.0.1" }, + "rgblight": { + "led_count": 1 + }, "ws2812": { "pin": "F7" }, diff --git a/keyboards/a_dux/keymaps/daliusd/keymap.c b/keyboards/a_dux/keymaps/daliusd/keymap.c index 7dec77b01e..dcc41a36ee 100644 --- a/keyboards/a_dux/keymaps/daliusd/keymap.c +++ b/keyboards/a_dux/keymaps/daliusd/keymap.c @@ -126,28 +126,28 @@ const uint32_t unicode_map[] PROGMEM = { [LT_CB] = 0x201c, // “ }; -#define K_SNEK X(SNEK) -#define K_EURO X(EURO) -#define K_LT_A XP(LT_S_A, LT_L_A) -#define K_LT_AU X(LT_L_A) -#define K_LT_C XP(LT_S_C, LT_L_C) -#define K_LT_CU X(LT_L_C) -#define K_LT_E1 XP(LT_S_E1, LT_L_E1) -#define K_LT_E1U X(LT_L_E1) -#define K_LT_E2 XP(LT_S_E2, LT_L_E2) -#define K_LT_E2U X(LT_L_E2) -#define K_LT_I XP(LT_S_I, LT_L_I) -#define K_LT_IU X(LT_L_I) -#define K_LT_S XP(LT_S_S, LT_L_S) -#define K_LT_SU X(LT_L_S) -#define K_LT_U1 XP(LT_S_U1, LT_L_U1) -#define K_LT_U1U X(LT_L_U1) -#define K_LT_U2 XP(LT_S_U2, LT_L_U2) -#define K_LT_U2U X(LT_L_U2) -#define K_LT_Z XP(LT_S_Z, LT_L_Z) -#define K_LT_ZU X(LT_L_Z) -#define K_LT_OB X(LT_OB) -#define K_LT_CB X(LT_CB) +#define K_SNEK UM(SNEK) +#define K_EURO UM(EURO) +#define K_LT_A UP(LT_S_A, LT_L_A) +#define K_LT_AU UM(LT_L_A) +#define K_LT_C UP(LT_S_C, LT_L_C) +#define K_LT_CU UM(LT_L_C) +#define K_LT_E1 UP(LT_S_E1, LT_L_E1) +#define K_LT_E1U UM(LT_L_E1) +#define K_LT_E2 UP(LT_S_E2, LT_L_E2) +#define K_LT_E2U UM(LT_L_E2) +#define K_LT_I UP(LT_S_I, LT_L_I) +#define K_LT_IU UM(LT_L_I) +#define K_LT_S UP(LT_S_S, LT_L_S) +#define K_LT_SU UM(LT_L_S) +#define K_LT_U1 UP(LT_S_U1, LT_L_U1) +#define K_LT_U1U UM(LT_L_U1) +#define K_LT_U2 UP(LT_S_U2, LT_L_U2) +#define K_LT_U2U UM(LT_L_U2) +#define K_LT_Z UP(LT_S_Z, LT_L_Z) +#define K_LT_ZU UM(LT_L_Z) +#define K_LT_OB UM(LT_OB) +#define K_LT_CB UM(LT_CB) const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { diff --git a/keyboards/abacus/config.h b/keyboards/abacus/config.h index b5109c291d..420cf9d143 100644 --- a/keyboards/abacus/config.h +++ b/keyboards/abacus/config.h @@ -19,11 +19,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #define DIP_SWITCH_PINS { D0 } -# define RGBLED_NUM 17 -# define RGBLIGHT_HUE_STEP 8 -# define RGBLIGHT_SAT_STEP 8 -# define RGBLIGHT_VAL_STEP 8 -# define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */ /*== choose animations ==*/ # define RGBLIGHT_EFFECT_BREATHING # define RGBLIGHT_EFFECT_RAINBOW_MOOD diff --git a/keyboards/abacus/info.json b/keyboards/abacus/info.json index c12d7cb235..261808c189 100644 --- a/keyboards/abacus/info.json +++ b/keyboards/abacus/info.json @@ -18,6 +18,12 @@ {"pin_a": "F1", "pin_b": "F0"} ] }, + "rgblight": { + "saturation_steps": 8, + "brightness_steps": 8, + "led_count": 17, + "sleep": true + }, "ws2812": { "pin": "D1" }, diff --git a/keyboards/abacus/keymaps/unicodemap/keymap.c b/keyboards/abacus/keymaps/unicodemap/keymap.c index 0e6ab0d647..46e2219f0b 100644 --- a/keyboards/abacus/keymaps/unicodemap/keymap.c +++ b/keyboards/abacus/keymaps/unicodemap/keymap.c @@ -76,7 +76,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { [_LOWER] = LAYOUT( NICKURL, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, _______, _______, KC_F11, KC_F12, RGB_MODE_PLAIN, RGB_MODE_BREATHE, RGB_MODE_RAINBOW, RGB_MODE_SWIRL, RGB_MODE_SNAKE, RGB_MODE_KNIGHT, RGB_MODE_GRADIENT, XXXXXXX, RGB_TOG, - _______, X(LOVEEYES), X(THINK), X(UPSIDEDOWN), X(NOMOUTH), X(PARTY), X(PEACH), X(HEART), X(EGGPLANT), X(EMOJI100), X(EMOJIB), RGB_HUI, + _______, UM(LOVEEYES), UM(THINK), UM(UPSIDEDOWN), UM(NOMOUTH), UM(PARTY), UM(PEACH), UM(HEART), UM(EGGPLANT), UM(EMOJI100), UM(EMOJIB), RGB_HUI, KC_CAPS, _______, _______, _______, _______, _______, _______, _______, _______ ) diff --git a/keyboards/abatskeyboardclub/nayeon/config.h b/keyboards/abatskeyboardclub/nayeon/config.h index b42ece99a6..7fedf4dce1 100644 --- a/keyboards/abatskeyboardclub/nayeon/config.h +++ b/keyboards/abatskeyboardclub/nayeon/config.h @@ -20,5 +20,4 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. /* RGB Matrix setup */ #define RGB_MATRIX_LED_COUNT 2 -#define RGBLED_NUM 2 #define WS2812_PIO_USE_PIO1 // Force the usage of PIO1 peripheral, by default the WS2812 implementation uses the PIO0 peripheral diff --git a/keyboards/abstract/ellipse/rev1/config.h b/keyboards/abstract/ellipse/rev1/config.h index c2632e0417..81349657ef 100644 --- a/keyboards/abstract/ellipse/rev1/config.h +++ b/keyboards/abstract/ellipse/rev1/config.h @@ -17,12 +17,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #pragma once - #define RGBLED_NUM 3 - #define RGBLIGHT_HUE_STEP 8 - #define RGBLIGHT_SAT_STEP 8 - #define RGBLIGHT_VAL_STEP 8 - #define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */ - /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ #define LOCKING_SUPPORT_ENABLE /* Locking resynchronize hack */ diff --git a/keyboards/abstract/ellipse/rev1/info.json b/keyboards/abstract/ellipse/rev1/info.json index 9dfe255ba2..341b522926 100644 --- a/keyboards/abstract/ellipse/rev1/info.json +++ b/keyboards/abstract/ellipse/rev1/info.json @@ -24,6 +24,12 @@ "pin": "C6", "levels": 15 }, + "rgblight": { + "saturation_steps": 8, + "brightness_steps": 8, + "led_count": 3, + "sleep": true + }, "ws2812": { "pin": "E6" }, diff --git a/keyboards/acekeyboard/titan60/config.h b/keyboards/acekeyboard/titan60/config.h index 2f3159192a..19c323f334 100644 --- a/keyboards/acekeyboard/titan60/config.h +++ b/keyboards/acekeyboard/titan60/config.h @@ -17,11 +17,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #pragma once -# define RGBLED_NUM 6 -# define RGBLIGHT_HUE_STEP 8 -# define RGBLIGHT_SAT_STEP 8 -# define RGBLIGHT_VAL_STEP 8 -# define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */ # define RGBLIGHT_EFFECT_BREATHING # define RGBLIGHT_EFFECT_RAINBOW_MOOD # define RGBLIGHT_EFFECT_RAINBOW_SWIRL diff --git a/keyboards/acekeyboard/titan60/info.json b/keyboards/acekeyboard/titan60/info.json index b384b7bcbf..552145092f 100644 --- a/keyboards/acekeyboard/titan60/info.json +++ b/keyboards/acekeyboard/titan60/info.json @@ -17,6 +17,12 @@ "pin": "B7", "breathing": true }, + "rgblight": { + "saturation_steps": 8, + "brightness_steps": 8, + "led_count": 6, + "sleep": true + }, "ws2812": { "pin": "D0" }, diff --git a/keyboards/acheron/apollo/87h/delta/rules.mk b/keyboards/acheron/apollo/87h/delta/rules.mk index ce1d65be0f..723724b7aa 100644 --- a/keyboards/acheron/apollo/87h/delta/rules.mk +++ b/keyboards/acheron/apollo/87h/delta/rules.mk @@ -12,5 +12,3 @@ RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow AUDIO_ENABLE = no # Audio output RGB_MATRIX_ENABLE = yes -# Enter lower-power sleep mode when on the ChibiOS idle thread -OPT_DEFS += -DCORTEX_ENABLE_WFI_IDLE=TRUE -DDEBUG_EEPROM_OUTPUT=TRUE diff --git a/keyboards/acheron/apollo/87h/gamma/rules.mk b/keyboards/acheron/apollo/87h/gamma/rules.mk index 25c83bb136..4af646ec02 100644 --- a/keyboards/acheron/apollo/87h/gamma/rules.mk +++ b/keyboards/acheron/apollo/87h/gamma/rules.mk @@ -13,5 +13,3 @@ AUDIO_ENABLE = no # Audio output RGB_MATRIX_ENABLE = yes KEYBOARD_SHARED_EP = yes -# Enter lower-power sleep mode when on the ChibiOS idle thread -OPT_DEFS += -DCORTEX_ENABLE_WFI_IDLE=TRUE -DDEBUG_EEPROM_OUTPUT=TRUE diff --git a/keyboards/acheron/apollo/87htsc/rules.mk b/keyboards/acheron/apollo/87htsc/rules.mk index ce1d65be0f..723724b7aa 100644 --- a/keyboards/acheron/apollo/87htsc/rules.mk +++ b/keyboards/acheron/apollo/87htsc/rules.mk @@ -12,5 +12,3 @@ RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow AUDIO_ENABLE = no # Audio output RGB_MATRIX_ENABLE = yes -# Enter lower-power sleep mode when on the ChibiOS idle thread -OPT_DEFS += -DCORTEX_ENABLE_WFI_IDLE=TRUE -DDEBUG_EEPROM_OUTPUT=TRUE diff --git a/keyboards/acheron/apollo/88htsc/rules.mk b/keyboards/acheron/apollo/88htsc/rules.mk index ce1d65be0f..723724b7aa 100644 --- a/keyboards/acheron/apollo/88htsc/rules.mk +++ b/keyboards/acheron/apollo/88htsc/rules.mk @@ -12,5 +12,3 @@ RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow AUDIO_ENABLE = no # Audio output RGB_MATRIX_ENABLE = yes -# Enter lower-power sleep mode when on the ChibiOS idle thread -OPT_DEFS += -DCORTEX_ENABLE_WFI_IDLE=TRUE -DDEBUG_EEPROM_OUTPUT=TRUE diff --git a/keyboards/acheron/arctic/rules.mk b/keyboards/acheron/arctic/rules.mk index 0aeca0dd9f..7f4f202a1b 100644 --- a/keyboards/acheron/arctic/rules.mk +++ b/keyboards/acheron/arctic/rules.mk @@ -11,5 +11,3 @@ BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow AUDIO_ENABLE = no # Audio output -# Enter lower-power sleep mode when on the ChibiOS idle thread -OPT_DEFS += -DCORTEX_ENABLE_WFI_IDLE=TRUE diff --git a/keyboards/acheron/athena/alpha/alpha.c b/keyboards/acheron/athena/alpha/alpha.c index 26c00e41aa..5b5c45b7c7 100644 --- a/keyboards/acheron/athena/alpha/alpha.c +++ b/keyboards/acheron/athena/alpha/alpha.c @@ -26,7 +26,6 @@ void keyboard_post_init_kb(void){ palSetLineMode(BACKLIGHT_PIN, PAL_MODE_ALTERNATE(BACKLIGHT_PAL_MODE) | PAL_STM32_OTYPE_OPENDRAIN | PAL_STM32_OSPEED_HIGHEST | PAL_STM32_PUPDR_FLOATING); } -#define LED_PIN_ON_STATE 1 void led_init_ports(void) { palSetLineMode(LED_CAPS_LOCK_PIN, PAL_MODE_OUTPUT_OPENDRAIN | PAL_STM32_PUPDR_FLOATING); } diff --git a/keyboards/acheron/athena/alpha/config.h b/keyboards/acheron/athena/alpha/config.h index 1f91766add..1bb03e3783 100644 --- a/keyboards/acheron/athena/alpha/config.h +++ b/keyboards/acheron/athena/alpha/config.h @@ -24,7 +24,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #define BACKLIGHT_PWM_CHANNEL 1 #define BACKLIGHT_PAL_MODE 2 -#define RGBLED_NUM 34 #define RGBLIGHT_EFFECT_BREATHING #define RGBLIGHT_EFFECT_RAINBOW_MOOD #define RGBLIGHT_EFFECT_RAINBOW_SWIRL diff --git a/keyboards/acheron/athena/alpha/info.json b/keyboards/acheron/athena/alpha/info.json index e72e8aece4..ff0ebf94b5 100644 --- a/keyboards/acheron/athena/alpha/info.json +++ b/keyboards/acheron/athena/alpha/info.json @@ -15,6 +15,9 @@ "on_state": 0, "breathing": true }, + "rgblight": { + "led_count": 34 + }, "ws2812": { "pin": "B15" }, diff --git a/keyboards/acheron/athena/alpha/rules.mk b/keyboards/acheron/athena/alpha/rules.mk index 3d622c2216..086e2474ba 100644 --- a/keyboards/acheron/athena/alpha/rules.mk +++ b/keyboards/acheron/athena/alpha/rules.mk @@ -13,5 +13,3 @@ AUDIO_ENABLE = no # Audio output LTO_ENABLE = yes ENCODER_ENABLE = no -# Enter lower-power sleep mode when on the ChibiOS idle thread -OPT_DEFS += -DCORTEX_ENABLE_WFI_IDLE=TRUE diff --git a/keyboards/acheron/athena/beta/config.h b/keyboards/acheron/athena/beta/config.h index 0376a9ac2c..77985b2ae5 100644 --- a/keyboards/acheron/athena/beta/config.h +++ b/keyboards/acheron/athena/beta/config.h @@ -24,7 +24,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #define BACKLIGHT_PWM_CHANNEL 3 #define BACKLIGHT_PAL_MODE 2 -#define RGBLED_NUM 34 #define RGBLIGHT_EFFECT_BREATHING #define RGBLIGHT_EFFECT_RAINBOW_MOOD #define RGBLIGHT_EFFECT_RAINBOW_SWIRL diff --git a/keyboards/acheron/athena/beta/info.json b/keyboards/acheron/athena/beta/info.json index b2ced072a8..21b7a96337 100644 --- a/keyboards/acheron/athena/beta/info.json +++ b/keyboards/acheron/athena/beta/info.json @@ -14,6 +14,9 @@ "levels": 20, "breathing": true }, + "rgblight": { + "led_count": 34 + }, "ws2812": { "pin": "B15" }, diff --git a/keyboards/acheron/athena/beta/rules.mk b/keyboards/acheron/athena/beta/rules.mk index 3d622c2216..086e2474ba 100644 --- a/keyboards/acheron/athena/beta/rules.mk +++ b/keyboards/acheron/athena/beta/rules.mk @@ -13,5 +13,3 @@ AUDIO_ENABLE = no # Audio output LTO_ENABLE = yes ENCODER_ENABLE = no -# Enter lower-power sleep mode when on the ChibiOS idle thread -OPT_DEFS += -DCORTEX_ENABLE_WFI_IDLE=TRUE diff --git a/keyboards/acheron/austin/rules.mk b/keyboards/acheron/austin/rules.mk index 295d6960ee..a5089d51a5 100644 --- a/keyboards/acheron/austin/rules.mk +++ b/keyboards/acheron/austin/rules.mk @@ -10,5 +10,3 @@ NKRO_ENABLE = yes # Enable N-Key Rollover BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow AUDIO_ENABLE = no # Audio output -# Enter lower-power sleep mode when on the ChibiOS idle thread -OPT_DEFS += -DCORTEX_ENABLE_WFI_IDLE=TRUE diff --git a/keyboards/acheron/elongate/beta/config.h b/keyboards/acheron/elongate/beta/config.h index 81093a2838..9158a2f62f 100644 --- a/keyboards/acheron/elongate/beta/config.h +++ b/keyboards/acheron/elongate/beta/config.h @@ -17,11 +17,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #pragma once - #define RGBLED_NUM 16 - #define RGBLIGHT_HUE_STEP 8 - #define RGBLIGHT_SAT_STEP 8 - #define RGBLIGHT_VAL_STEP 8 -# define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */ # define RGBLIGHT_EFFECT_BREATHING # define RGBLIGHT_EFFECT_RAINBOW_MOOD # define RGBLIGHT_EFFECT_RAINBOW_SWIRL diff --git a/keyboards/acheron/elongate/beta/info.json b/keyboards/acheron/elongate/beta/info.json index 5f46a2a48c..192784ba2a 100644 --- a/keyboards/acheron/elongate/beta/info.json +++ b/keyboards/acheron/elongate/beta/info.json @@ -8,6 +8,12 @@ "pid": "0x454C", "device_version": "0.0.1" }, + "rgblight": { + "saturation_steps": 8, + "brightness_steps": 8, + "led_count": 16, + "sleep": true + }, "ws2812": { "pin": "D7" }, diff --git a/keyboards/acheron/elongate/delta/config.h b/keyboards/acheron/elongate/delta/config.h index 2113a65b3a..89122ba8cc 100755 --- a/keyboards/acheron/elongate/delta/config.h +++ b/keyboards/acheron/elongate/delta/config.h @@ -21,8 +21,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #define BACKLIGHT_PWM_CHANNEL 1 #define BACKLIGHT_PAL_MODE 1 -#define RGBLED_NUM 16 -#define RGBLIGHT_SLEEP #define RGBLIGHT_EFFECT_BREATHING #define RGBLIGHT_EFFECT_RAINBOW_MOOD #define RGBLIGHT_EFFECT_RAINBOW_SWIRL diff --git a/keyboards/acheron/elongate/delta/delta.c b/keyboards/acheron/elongate/delta/delta.c index e83516b566..e621b4495b 100755 --- a/keyboards/acheron/elongate/delta/delta.c +++ b/keyboards/acheron/elongate/delta/delta.c @@ -16,7 +16,6 @@ #include "quantum.h" -#define LED_PIN_ON_STATE 1 // Inits all indicator LEDs as push-pull outputs void led_init_ports(void) { palSetLineMode(LED1_PIN, PAL_MODE_OUTPUT_PUSHPULL); diff --git a/keyboards/acheron/elongate/delta/info.json b/keyboards/acheron/elongate/delta/info.json index c753810954..429cb11293 100644 --- a/keyboards/acheron/elongate/delta/info.json +++ b/keyboards/acheron/elongate/delta/info.json @@ -20,7 +20,9 @@ "breathing_period": 3 }, "rgblight": { - "max_brightness": 200 + "led_count": 16, + "max_brightness": 200, + "sleep": true }, "ws2812": { "pin": "B15" diff --git a/keyboards/acheron/elongate/delta/rules.mk b/keyboards/acheron/elongate/delta/rules.mk index f84ab5d602..3d5cb57ad5 100755..100644 --- a/keyboards/acheron/elongate/delta/rules.mk +++ b/keyboards/acheron/elongate/delta/rules.mk @@ -10,5 +10,3 @@ NKRO_ENABLE = yes # Enable N-Key Rollover BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality RGBLIGHT_ENABLE = yes # Enable keyboard RGB underglow AUDIO_ENABLE = no # Audio output -# Enter lower-power sleep mode when on the ChibiOS idle thread -OPT_DEFS += -DCORTEX_ENABLE_WFI_IDLE=TRUE diff --git a/keyboards/acheron/keebspcb/rules.mk b/keyboards/acheron/keebspcb/rules.mk index f94f12cb84..5356b24d77 100644 --- a/keyboards/acheron/keebspcb/rules.mk +++ b/keyboards/acheron/keebspcb/rules.mk @@ -10,5 +10,3 @@ NKRO_ENABLE = yes # Enable N-Key Rollover BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow AUDIO_ENABLE = no # Audio output -# Enter lower-power sleep mode when on the ChibiOS idle thread -OPT_DEFS += -DCORTEX_ENABLE_WFI_IDLE=TRUE diff --git a/keyboards/acheron/lasgweloth/rules.mk b/keyboards/acheron/lasgweloth/rules.mk index 93f25a13d8..5b6b0c9299 100644 --- a/keyboards/acheron/lasgweloth/rules.mk +++ b/keyboards/acheron/lasgweloth/rules.mk @@ -12,5 +12,3 @@ RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow AUDIO_ENABLE = no # Audio output ENCODER_ENABLE = no -# Enter lower-power sleep mode when on the ChibiOS idle thread -OPT_DEFS += -DCORTEX_ENABLE_WFI_IDLE=TRUE diff --git a/keyboards/acheron/shark/beta/config.h b/keyboards/acheron/shark/beta/config.h index 348b284a3f..25ad6b3bf0 100644 --- a/keyboards/acheron/shark/beta/config.h +++ b/keyboards/acheron/shark/beta/config.h @@ -24,7 +24,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #define BACKLIGHT_PWM_CHANNEL 1 #define BACKLIGHT_PAL_MODE 2 -#define RGBLED_NUM 24 #define RGBLIGHT_EFFECT_BREATHING #define RGBLIGHT_EFFECT_RAINBOW_MOOD #define RGBLIGHT_EFFECT_RAINBOW_SWIRL diff --git a/keyboards/acheron/shark/beta/info.json b/keyboards/acheron/shark/beta/info.json index 504e86f4b3..ca1ef7082b 100644 --- a/keyboards/acheron/shark/beta/info.json +++ b/keyboards/acheron/shark/beta/info.json @@ -14,6 +14,9 @@ {"pin_a": "C15", "pin_b": "C14"} ] }, + "rgblight": { + "led_count": 24 + }, "ws2812": { "pin": "B15" }, diff --git a/keyboards/acheron/shark/beta/rules.mk b/keyboards/acheron/shark/beta/rules.mk index fd436cc258..a398475a3e 100644 --- a/keyboards/acheron/shark/beta/rules.mk +++ b/keyboards/acheron/shark/beta/rules.mk @@ -15,5 +15,3 @@ ENCODER_ENABLE = yes EEPROM_DRIVER = i2c -# Enter lower-power sleep mode when on the ChibiOS idle thread -OPT_DEFS += -DCORTEX_ENABLE_WFI_IDLE=TRUE diff --git a/keyboards/ada/ada1800mini/config.h b/keyboards/ada/ada1800mini/config.h index 92f08f354c..0c279a8bca 100644 --- a/keyboards/ada/ada1800mini/config.h +++ b/keyboards/ada/ada1800mini/config.h @@ -17,11 +17,6 @@ #pragma once //TODO: implement RGB matrix when I get the hardware - #define RGBLED_NUM 100 - #define RGBLIGHT_HUE_STEP 8 - #define RGBLIGHT_SAT_STEP 8 - #define RGBLIGHT_VAL_STEP 8 - #define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */ #define RGBLIGHT_EFFECT_BREATHING #define RGBLIGHT_EFFECT_RAINBOW_MOOD #define RGBLIGHT_EFFECT_RAINBOW_SWIRL diff --git a/keyboards/ada/ada1800mini/info.json b/keyboards/ada/ada1800mini/info.json index 1768a7b55b..d32cee2fbe 100644 --- a/keyboards/ada/ada1800mini/info.json +++ b/keyboards/ada/ada1800mini/info.json @@ -12,7 +12,11 @@ "pin": "F0" }, "rgblight": { - "max_brightness": 200 + "saturation_steps": 8, + "brightness_steps": 8, + "led_count": 100, + "max_brightness": 200, + "sleep": true }, "matrix_pins": { "cols": ["F1", "F4", "F5", "F6", "F7", "C7", "C6", "B6", "B5", "B4", "D7", "D6", "B3", "B2", "B1"], diff --git a/keyboards/ada/infinity81/config.h b/keyboards/ada/infinity81/config.h index 336bd351f1..862f50a3c3 100644 --- a/keyboards/ada/infinity81/config.h +++ b/keyboards/ada/infinity81/config.h @@ -3,11 +3,6 @@ #pragma once -# define RGBLED_NUM 107 -# define RGBLIGHT_HUE_STEP 8 -# define RGBLIGHT_SAT_STEP 8 -# define RGBLIGHT_VAL_STEP 8 -# define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */ #define RGBLIGHT_EFFECT_BREATHING #define RGBLIGHT_EFFECT_RAINBOW_MOOD #define RGBLIGHT_EFFECT_RAINBOW_SWIRL diff --git a/keyboards/ada/infinity81/info.json b/keyboards/ada/infinity81/info.json index f957a01094..8e7e475c9f 100644 --- a/keyboards/ada/infinity81/info.json +++ b/keyboards/ada/infinity81/info.json @@ -8,6 +8,12 @@ "pid": "0x0081", "device_version": "0.0.1" }, + "rgblight": { + "saturation_steps": 8, + "brightness_steps": 8, + "led_count": 107, + "sleep": true + }, "ws2812": { "pin": "D0" }, diff --git a/keyboards/adafruit/macropad/config.h b/keyboards/adafruit/macropad/config.h index 08db87fefe..818a8229f5 100644 --- a/keyboards/adafruit/macropad/config.h +++ b/keyboards/adafruit/macropad/config.h @@ -55,7 +55,6 @@ /* RGB Defines */ # define RGB_MATRIX_LED_COUNT 12 -# define RGBLED_NUM 12 /* Enable Framebuffer and keypress effects */ # define RGB_MATRIX_FRAMEBUFFER_EFFECTS diff --git a/keyboards/adkb96/info.json b/keyboards/adkb96/info.json index 47e08a7ed7..aa7e5a6921 100644 --- a/keyboards/adkb96/info.json +++ b/keyboards/adkb96/info.json @@ -16,6 +16,9 @@ "split": { "soft_serial_pin": "D0" }, + "tapping": { + "term": 100 + }, "processor": "atmega32u4", "bootloader": "caterina", "layout_aliases": { diff --git a/keyboards/adkb96/rev1/config.h b/keyboards/adkb96/rev1/config.h index 89de3d9a64..0b8941e776 100644 --- a/keyboards/adkb96/rev1/config.h +++ b/keyboards/adkb96/rev1/config.h @@ -18,9 +18,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #pragma once -/* define tapping term */ -#define TAPPING_TERM 100 - /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ #define LOCKING_SUPPORT_ENABLE /* Locking resynchronize hack */ diff --git a/keyboards/adm42/config.h b/keyboards/adm42/config.h index af23da4c66..b5ba2eb94e 100644 --- a/keyboards/adm42/config.h +++ b/keyboards/adm42/config.h @@ -16,8 +16,6 @@ #pragma once -#define TAP_CODE_DELAY 1 - #if defined(CONSOLE_ENABLE) #define DEBUG_MATRIX_SCAN_RATE #endif diff --git a/keyboards/adm42/info.json b/keyboards/adm42/info.json index 0ffebff135..b890ad5e6b 100644 --- a/keyboards/adm42/info.json +++ b/keyboards/adm42/info.json @@ -13,7 +13,11 @@ "pin": "B7" }, "rgb_matrix": { - "driver": "WS2812" + "driver": "WS2812", + "sat_steps": 24 + }, + "qmk": { + "tap_keycode_delay": 1 }, "matrix_pins": { "cols": ["C6", "B6", "B5", "B4", "D7", "D6", "F0", "F1", "F4", "F5", "F6", "F7"], diff --git a/keyboards/adm42/rev4/config.h b/keyboards/adm42/rev4/config.h index fbf2e300ef..5553b18751 100644 --- a/keyboards/adm42/rev4/config.h +++ b/keyboards/adm42/rev4/config.h @@ -27,10 +27,6 @@ #define RGB_MATRIX_TYPING_HEATMAP_DECREASE_DELAY_MS 20 #define RGB_MATRIX_KEYPRESSES #define RGB_MATRIX_FRAMEBUFFER_EFFECTS -#define RGB_MATRIX_SAT_STEP 24 -#define RGB_MATRIX_HUE_STEP 8 -#define RGB_MATRIX_VAL_STEP 16 -#define RGB_MATRIX_SPD_STEP 16 #define ENABLE_RGB_MATRIX_BREATHING #define ENABLE_RGB_MATRIX_CYCLE_LEFT_RIGHT diff --git a/keyboards/adpenrose/akemipad/config.h b/keyboards/adpenrose/akemipad/config.h index 5756903c66..230453c3a0 100644 --- a/keyboards/adpenrose/akemipad/config.h +++ b/keyboards/adpenrose/akemipad/config.h @@ -3,8 +3,6 @@ #pragma once -#define TAP_CODE_DELAY 10 - /* Audio functionality */ #define AUDIO_PIN C6 #define AUDIO_CLICKY diff --git a/keyboards/adpenrose/akemipad/info.json b/keyboards/adpenrose/akemipad/info.json index fb70fb00a4..c1b6377e60 100644 --- a/keyboards/adpenrose/akemipad/info.json +++ b/keyboards/adpenrose/akemipad/info.json @@ -23,6 +23,9 @@ {"pin_a": "B1", "pin_b": "B3"} ] }, + "qmk": { + "tap_keycode_delay": 10 + }, "processor": "atmega32u4", "bootloader": "caterina", "layouts": { diff --git a/keyboards/adpenrose/kintsugi/config.h b/keyboards/adpenrose/kintsugi/config.h index 088b40139b..e08849d93e 100644 --- a/keyboards/adpenrose/kintsugi/config.h +++ b/keyboards/adpenrose/kintsugi/config.h @@ -17,14 +17,7 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #pragma once -#define TAP_CODE_DELAY 10 - /* Underglow options: */ -# define RGBLED_NUM 16 -# define RGBLIGHT_HUE_STEP 8 -# define RGBLIGHT_SAT_STEP 8 -# define RGBLIGHT_VAL_STEP 8 -# define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */ # define RGBLIGHT_EFFECT_BREATHING # define RGBLIGHT_EFFECT_RAINBOW_MOOD # define RGBLIGHT_EFFECT_RAINBOW_SWIRL diff --git a/keyboards/adpenrose/kintsugi/info.json b/keyboards/adpenrose/kintsugi/info.json index 3daf3326ac..6ae75a227e 100644 --- a/keyboards/adpenrose/kintsugi/info.json +++ b/keyboards/adpenrose/kintsugi/info.json @@ -8,6 +8,12 @@ "pid": "0x0001", "device_version": "1.0.0" }, + "rgblight": { + "saturation_steps": 8, + "brightness_steps": 8, + "led_count": 16, + "sleep": true + }, "ws2812": { "pin": "F1" }, @@ -21,6 +27,9 @@ {"pin_a": "B7", "pin_b": "D5"} ] }, + "qmk": { + "tap_keycode_delay": 10 + }, "processor": "atmega32u4", "bootloader": "atmel-dfu", "layouts": { diff --git a/keyboards/adpenrose/obi/config.h b/keyboards/adpenrose/obi/config.h index 862c0fe1ee..109ffbe418 100644 --- a/keyboards/adpenrose/obi/config.h +++ b/keyboards/adpenrose/obi/config.h @@ -3,14 +3,7 @@ #pragma once -#define TAP_CODE_DELAY 10 - /* Underglow options: */ -# define RGBLED_NUM 16 -# define RGBLIGHT_HUE_STEP 8 -# define RGBLIGHT_SAT_STEP 8 -# define RGBLIGHT_VAL_STEP 8 -# define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */ # define RGBLIGHT_EFFECT_BREATHING # define RGBLIGHT_EFFECT_RAINBOW_MOOD # define RGBLIGHT_EFFECT_RAINBOW_SWIRL diff --git a/keyboards/adpenrose/obi/info.json b/keyboards/adpenrose/obi/info.json index 00a2572e7a..b67080af2c 100644 --- a/keyboards/adpenrose/obi/info.json +++ b/keyboards/adpenrose/obi/info.json @@ -7,6 +7,12 @@ "pid": "0x0002", "vid": "0x4450" }, + "rgblight": { + "saturation_steps": 8, + "brightness_steps": 8, + "led_count": 16, + "sleep": true + }, "ws2812": { "pin": "F7" }, @@ -20,6 +26,9 @@ {"pin_a": "F1", "pin_b": "F0"} ] }, + "qmk": { + "tap_keycode_delay": 10 + }, "processor": "atmega32u4", "bootloader": "caterina", "layouts": { diff --git a/keyboards/aeboards/ext65/rev2/config.h b/keyboards/aeboards/ext65/rev2/config.h index 0bc48fb562..ae855d38ac 100644 --- a/keyboards/aeboards/ext65/rev2/config.h +++ b/keyboards/aeboards/ext65/rev2/config.h @@ -27,7 +27,6 @@ #define RGBLIGHT_EFFECT_RGB_TEST #define RGBLIGHT_EFFECT_ALTERNATING #define RGBLIGHT_EFFECT_TWINKLE -#define RGBLED_NUM 24 //SPI #define WS2812_SPI SPID2 diff --git a/keyboards/aeboards/ext65/rev2/info.json b/keyboards/aeboards/ext65/rev2/info.json index bfdcae090e..1018336ed5 100644 --- a/keyboards/aeboards/ext65/rev2/info.json +++ b/keyboards/aeboards/ext65/rev2/info.json @@ -12,6 +12,9 @@ "levels": 6, "breathing": true }, + "rgblight": { + "led_count": 24 + }, "ws2812": { "pin": "B15", "driver": "spi" diff --git a/keyboards/aeboards/ext65/rev2/rules.mk b/keyboards/aeboards/ext65/rev2/rules.mk index d52eea26d1..b9637955ff 100644 --- a/keyboards/aeboards/ext65/rev2/rules.mk +++ b/keyboards/aeboards/ext65/rev2/rules.mk @@ -12,5 +12,3 @@ RGBLIGHT_ENABLE = yes # Enable keyboard RGB underglow AUDIO_ENABLE = no # Audio output SLEEP_LED_ENABLE = yes -# Enter lower-power sleep mode when on the ChibiOS idle thread -OPT_DEFS += -DCORTEX_ENABLE_WFI_IDLE=TRUE diff --git a/keyboards/ai03/andromeda/rules.mk b/keyboards/ai03/andromeda/rules.mk index 0aeca0dd9f..7f4f202a1b 100644 --- a/keyboards/ai03/andromeda/rules.mk +++ b/keyboards/ai03/andromeda/rules.mk @@ -11,5 +11,3 @@ BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow AUDIO_ENABLE = no # Audio output -# Enter lower-power sleep mode when on the ChibiOS idle thread -OPT_DEFS += -DCORTEX_ENABLE_WFI_IDLE=TRUE diff --git a/keyboards/ai03/polaris/config.h b/keyboards/ai03/polaris/config.h index 2542b9f62f..c920b83bc9 100644 --- a/keyboards/ai03/polaris/config.h +++ b/keyboards/ai03/polaris/config.h @@ -17,11 +17,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #pragma once - #define RGBLED_NUM 14 - #define RGBLIGHT_HUE_STEP 8 - #define RGBLIGHT_SAT_STEP 8 - #define RGBLIGHT_VAL_STEP 8 - #define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */ # define RGBLIGHT_EFFECT_BREATHING # define RGBLIGHT_EFFECT_RAINBOW_MOOD # define RGBLIGHT_EFFECT_RAINBOW_SWIRL diff --git a/keyboards/ai03/polaris/info.json b/keyboards/ai03/polaris/info.json index af67191ba1..e875c727db 100644 --- a/keyboards/ai03/polaris/info.json +++ b/keyboards/ai03/polaris/info.json @@ -19,7 +19,11 @@ "breathing": true }, "rgblight": { - "max_brightness": 200 + "saturation_steps": 8, + "brightness_steps": 8, + "led_count": 14, + "max_brightness": 200, + "sleep": true }, "ws2812": { "pin": "D2" diff --git a/keyboards/ai03/quasar/keymaps/ai03/keymap.c b/keyboards/ai03/quasar/keymaps/ai03/keymap.c index 4df12732bd..c564b8aa38 100644 --- a/keyboards/ai03/quasar/keymaps/ai03/keymap.c +++ b/keyboards/ai03/quasar/keymaps/ai03/keymap.c @@ -33,19 +33,3 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { _______, _______, _______, _______, KC_BSPC, KC_HOME, KC_PGDN, KC_END ) }; - -bool process_record_user(uint16_t keycode, keyrecord_t *record) { - return true; -} - -void matrix_init_user(void) { - -} - -void matrix_scan_user(void) { - -} - -void led_set_user(uint8_t usb_led) { - -} diff --git a/keyboards/ai03/soyuz/keymaps/1U/keymap.c b/keyboards/ai03/soyuz/keymaps/1U/keymap.c index 1d6f3dfa8c..792457cf10 100644 --- a/keyboards/ai03/soyuz/keymaps/1U/keymap.c +++ b/keyboards/ai03/soyuz/keymaps/1U/keymap.c @@ -43,15 +43,3 @@ bool process_record_user(uint16_t keycode, keyrecord_t *record) { } return true; } - -void matrix_init_user(void) { - -} - -void matrix_scan_user(void) { - -} - -void led_set_user(uint8_t usb_led) { - -} diff --git a/keyboards/ai03/vega/rules.mk b/keyboards/ai03/vega/rules.mk index 0aeca0dd9f..7f4f202a1b 100644 --- a/keyboards/ai03/vega/rules.mk +++ b/keyboards/ai03/vega/rules.mk @@ -11,5 +11,3 @@ BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow AUDIO_ENABLE = no # Audio output -# Enter lower-power sleep mode when on the ChibiOS idle thread -OPT_DEFS += -DCORTEX_ENABLE_WFI_IDLE=TRUE diff --git a/keyboards/ai03/voyager60_alps/config.h b/keyboards/ai03/voyager60_alps/config.h deleted file mode 100644 index a358ce601e..0000000000 --- a/keyboards/ai03/voyager60_alps/config.h +++ /dev/null @@ -1,37 +0,0 @@ -/* -Copyright 2020 <t@ylor.io> -This program is free software: you can redistribute it and/or modify -it under the terms of the GNU General Public License as published by -the Free Software Foundation, either version 2 of the License, or -(at your option) any later version. -This program is distributed in the hope that it will be useful, -but WITHOUT ANY WARRANTY; without even the implied warranty of -MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -GNU General Public License for more details. -You should have received a copy of the GNU General Public License -along with this program. If not, see <http://www.gnu.org/licenses/>. -*/ - -#pragma once - - #define RGBLED_NUM 14 - #define RGBLIGHT_HUE_STEP 8 - #define RGBLIGHT_SAT_STEP 8 - #define RGBLIGHT_VAL_STEP 8 - #define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */ - -/* - * Feature disable options - * These options are also useful to firmware size reduction. - */ - -/* disable debug print */ -// #define NO_DEBUG - -/* disable print */ -// #define NO_PRINT - -/* disable action features */ -//#define NO_ACTION_LAYER -//#define NO_ACTION_TAPPING -//#define NO_ACTION_ONESHOT diff --git a/keyboards/ai03/voyager60_alps/info.json b/keyboards/ai03/voyager60_alps/info.json index 00a2a9f4d8..440f061432 100644 --- a/keyboards/ai03/voyager60_alps/info.json +++ b/keyboards/ai03/voyager60_alps/info.json @@ -8,6 +8,12 @@ "pid": "0x060A", "device_version": "0.0.1" }, + "rgblight": { + "saturation_steps": 8, + "brightness_steps": 8, + "led_count": 14, + "sleep": true + }, "ws2812": { "pin": "D2" }, diff --git a/keyboards/akegata_denki/device_one/rules.mk b/keyboards/akegata_denki/device_one/rules.mk index 6ac6abcf56..26de1138e5 100644 --- a/keyboards/akegata_denki/device_one/rules.mk +++ b/keyboards/akegata_denki/device_one/rules.mk @@ -10,5 +10,3 @@ COMMAND_ENABLE = no # Commands for debug and configuration NKRO_ENABLE = yes # Enable N-Key Rollover NO_USB_STARTUP_CHECK = no # Disable initialization only when usb is plugged in -# Enter lower-power sleep mode when on the ChibiOS idle thread -OPT_DEFS += -DCORTEX_ENABLE_WFI_IDLE=TRUE diff --git a/keyboards/alas/config.h b/keyboards/alas/config.h index a442481560..6f81ce367b 100644 --- a/keyboards/alas/config.h +++ b/keyboards/alas/config.h @@ -19,7 +19,3 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. /* Ensure we jump to bootloader if the RESET keycode was pressed */ #define EARLY_INIT_PERFORM_BOOTLOADER_JUMP TRUE - -/* Indicator LEDs */ -#define LED_CAPS_LOCK_PIN B6 -#define LED_PIN_ON_STATE 0 diff --git a/keyboards/alas/info.json b/keyboards/alas/info.json index 6c2beff27e..5c5e29f595 100755 --- a/keyboards/alas/info.json +++ b/keyboards/alas/info.json @@ -8,6 +8,10 @@ "pid": "0x414C", "device_version": "0.0.1" }, + "indicators": { + "caps_lock": "B6", + "on_state": 0 + }, "matrix_pins": { "cols": ["A1", "B1", "B0", "A7", "A6", "A5", "A4", "A3", "B2", "B10", "B11", "B12", "B13", "B14"], "rows": ["A2", "B9", "B8", "B5", "B4"] diff --git a/keyboards/alas/rules.mk b/keyboards/alas/rules.mk index 4b25596ba2..916e1bf9bb 100755..100644 --- a/keyboards/alas/rules.mk +++ b/keyboards/alas/rules.mk @@ -1,11 +1,6 @@ # Wildcard to allow APM32 MCU DFU_SUFFIX_ARGS = -v FFFF -p FFFF -# Do not put the microcontroller into power saving mode -# when we get USB suspend event. We want it to keep updating -# backlight effects. -OPT_DEFS += -DCORTEX_ENABLE_WFI_IDLE=TRUE - # Build Options # change yes to no to disable # diff --git a/keyboards/aleblazer/zodiark/config.h b/keyboards/aleblazer/zodiark/config.h index 900836e4a8..88080d501c 100644 --- a/keyboards/aleblazer/zodiark/config.h +++ b/keyboards/aleblazer/zodiark/config.h @@ -19,9 +19,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #define SELECT_SOFT_SERIAL_SPEED 1 #ifdef RGBLIGHT_ENABLE -#define RGBLED_NUM 68 -#define RGBLIGHT_SPLIT -#define RGBLED_SPLIT { 34, 34 } #define RGBLIGHT_EFFECT_BREATHING #define RGBLIGHT_EFFECT_RAINBOW_MOOD #define RGBLIGHT_EFFECT_RAINBOW_SWIRL @@ -32,9 +29,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #define RGBLIGHT_EFFECT_RGB_TEST #define RGBLIGHT_EFFECT_ALTERNATING #define RGBLIGHT_EFFECT_TWINKLE -#define RGBLIGHT_HUE_STEP 8 -#define RGBLIGHT_SAT_STEP 8 -#define RGBLIGHT_VAL_STEP 8 #endif #ifdef RGB_MATRIX_ENABLE @@ -43,8 +37,4 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #define RGB_MATRIX_MAXIMUM_BRIGHTNESS 150 // limits maximum brightness of LEDs to 150 out of 255. Higher may cause the controller to crash. #define RGB_MATRIX_KEYPRESSES #define RGB_MATRIX_FRAMEBUFFER_EFFECTS -#define RGB_MATRIX_HUE_STEP 8 -#define RGB_MATRIX_SAT_STEP 8 -#define RGB_MATRIX_VAL_STEP 8 -#define RGB_MATRIX_SPD_STEP 10 #endif diff --git a/keyboards/aleblazer/zodiark/info.json b/keyboards/aleblazer/zodiark/info.json index 0052d39844..79f71d6ae8 100644 --- a/keyboards/aleblazer/zodiark/info.json +++ b/keyboards/aleblazer/zodiark/info.json @@ -12,10 +12,17 @@ "pin": "B5" }, "rgblight": { - "max_brightness": 170 + "saturation_steps": 8, + "brightness_steps": 8, + "led_count": 68, + "max_brightness": 170, + "split_count": [34, 34] }, "rgb_matrix": { - "driver": "WS2812" + "driver": "WS2812", + "sat_steps": 8, + "val_steps": 8, + "speed_steps": 10 }, "matrix_pins": { "cols": ["F5", "F6", "F7", "B1", "B3", "B2", "B6"], diff --git a/keyboards/alf/dc60/config.h b/keyboards/alf/dc60/config.h index b94b584df0..62c2837ebe 100644 --- a/keyboards/alf/dc60/config.h +++ b/keyboards/alf/dc60/config.h @@ -27,10 +27,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #define RGBLIGHT_EFFECT_RGB_TEST #define RGBLIGHT_EFFECT_ALTERNATING #define RGBLIGHT_EFFECT_TWINKLE -#define RGBLED_NUM 20 -#define RGBLIGHT_HUE_STEP 8 -#define RGBLIGHT_SAT_STEP 8 -#define RGBLIGHT_VAL_STEP 8 /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ #define LOCKING_SUPPORT_ENABLE diff --git a/keyboards/alf/dc60/info.json b/keyboards/alf/dc60/info.json index 9d304c8de9..9c3f8e8b8f 100644 --- a/keyboards/alf/dc60/info.json +++ b/keyboards/alf/dc60/info.json @@ -17,6 +17,11 @@ "levels": 5, "breathing": true }, + "rgblight": { + "saturation_steps": 8, + "brightness_steps": 8, + "led_count": 20 + }, "ws2812": { "pin": "E6" }, diff --git a/keyboards/alf/x11/config.h b/keyboards/alf/x11/config.h index 639c56298b..bf4b9cff60 100644 --- a/keyboards/alf/x11/config.h +++ b/keyboards/alf/x11/config.h @@ -17,11 +17,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #pragma once - #define RGBLED_NUM 28 - #define RGBLIGHT_HUE_STEP 8 - #define RGBLIGHT_SAT_STEP 8 - #define RGBLIGHT_VAL_STEP 8 - #define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */ # define RGBLIGHT_EFFECT_BREATHING # define RGBLIGHT_EFFECT_RAINBOW_MOOD # define RGBLIGHT_EFFECT_RAINBOW_SWIRL diff --git a/keyboards/alf/x11/info.json b/keyboards/alf/x11/info.json index bca26ecb0a..cc2c29a6f6 100644 --- a/keyboards/alf/x11/info.json +++ b/keyboards/alf/x11/info.json @@ -17,6 +17,12 @@ "pin": "B7", "breathing": true }, + "rgblight": { + "saturation_steps": 8, + "brightness_steps": 8, + "led_count": 28, + "sleep": true + }, "ws2812": { "pin": "F7" }, diff --git a/keyboards/alf/x2/config.h b/keyboards/alf/x2/config.h index c982289a0b..d3d6a8b100 100644 --- a/keyboards/alf/x2/config.h +++ b/keyboards/alf/x2/config.h @@ -32,7 +32,3 @@ # define RGBLIGHT_EFFECT_RGB_TEST # define RGBLIGHT_EFFECT_ALTERNATING # define RGBLIGHT_EFFECT_TWINKLE -# define RGBLED_NUM 4 -# define RGBLIGHT_HUE_STEP 8 -# define RGBLIGHT_SAT_STEP 8 -# define RGBLIGHT_VAL_STEP 8 diff --git a/keyboards/alf/x2/info.json b/keyboards/alf/x2/info.json index ea54b093ce..7a7dad29b6 100644 --- a/keyboards/alf/x2/info.json +++ b/keyboards/alf/x2/info.json @@ -17,6 +17,11 @@ "caps_lock": "B2", "on_state": 0 }, + "rgblight": { + "saturation_steps": 8, + "brightness_steps": 8, + "led_count": 4 + }, "ws2812": { "pin": "E2" }, diff --git a/keyboards/alfredslab/swift65/hotswap/config.h b/keyboards/alfredslab/swift65/hotswap/config.h index 793bb4dd1e..819bbf1a5e 100644 --- a/keyboards/alfredslab/swift65/hotswap/config.h +++ b/keyboards/alfredslab/swift65/hotswap/config.h @@ -16,11 +16,6 @@ #pragma once - #define RGBLED_NUM 22 - #define RGBLIGHT_HUE_STEP 8 - #define RGBLIGHT_SAT_STEP 8 - #define RGBLIGHT_VAL_STEP 8 - #define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */ /*== all animations enable ==*/ #define RGBLIGHT_EFFECT_BREATHING #define RGBLIGHT_EFFECT_RAINBOW_MOOD diff --git a/keyboards/alfredslab/swift65/hotswap/info.json b/keyboards/alfredslab/swift65/hotswap/info.json index d60bd0c85d..f7580fb475 100644 --- a/keyboards/alfredslab/swift65/hotswap/info.json +++ b/keyboards/alfredslab/swift65/hotswap/info.json @@ -8,6 +8,12 @@ "pid": "0xD4C4", "device_version": "0.0.1" }, + "rgblight": { + "saturation_steps": 8, + "brightness_steps": 8, + "led_count": 22, + "sleep": true + }, "ws2812": { "pin": "D2" }, diff --git a/keyboards/alfredslab/swift65/solder/config.h b/keyboards/alfredslab/swift65/solder/config.h index 9ee0233356..7d264c96f0 100644 --- a/keyboards/alfredslab/swift65/solder/config.h +++ b/keyboards/alfredslab/swift65/solder/config.h @@ -17,11 +17,6 @@ #pragma once - #define RGBLED_NUM 14 - #define RGBLIGHT_HUE_STEP 8 - #define RGBLIGHT_SAT_STEP 8 - #define RGBLIGHT_VAL_STEP 8 - #define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */ # define RGBLIGHT_EFFECT_BREATHING # define RGBLIGHT_EFFECT_RAINBOW_MOOD # define RGBLIGHT_EFFECT_RAINBOW_SWIRL diff --git a/keyboards/alfredslab/swift65/solder/info.json b/keyboards/alfredslab/swift65/solder/info.json index 129b0436d9..660a800827 100644 --- a/keyboards/alfredslab/swift65/solder/info.json +++ b/keyboards/alfredslab/swift65/solder/info.json @@ -9,7 +9,11 @@ "device_version": "0.0.1" }, "rgblight": { - "max_brightness": 100 + "saturation_steps": 8, + "brightness_steps": 8, + "led_count": 14, + "max_brightness": 100, + "sleep": true }, "ws2812": { "pin": "D2" diff --git a/keyboards/alpha/config.h b/keyboards/alpha/config.h index b4ab41d42c..d702489ee7 100755 --- a/keyboards/alpha/config.h +++ b/keyboards/alpha/config.h @@ -16,7 +16,3 @@ #define RGBLIGHT_EFFECT_RGB_TEST #define RGBLIGHT_EFFECT_ALTERNATING #define RGBLIGHT_EFFECT_TWINKLE -#define RGBLED_NUM 5 -#define RGBLIGHT_HUE_STEP 8 -#define RGBLIGHT_SAT_STEP 8 -#define RGBLIGHT_VAL_STEP 8 diff --git a/keyboards/alpha/info.json b/keyboards/alpha/info.json index 86e4dbefb3..0ea5b89761 100644 --- a/keyboards/alpha/info.json +++ b/keyboards/alpha/info.json @@ -7,6 +7,11 @@ "pid": "0x6060", "device_version": "0.0.1" }, + "rgblight": { + "saturation_steps": 8, + "brightness_steps": 8, + "led_count": 5 + }, "ws2812": { "pin": "F4" }, diff --git a/keyboards/alpine65/config.h b/keyboards/alpine65/config.h index ac74e24450..3717a6d07c 100644 --- a/keyboards/alpine65/config.h +++ b/keyboards/alpine65/config.h @@ -22,8 +22,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. /* Locking resynchronize hack */ #define LOCKING_RESYNC_ENABLE -#define RGBLED_NUM 68 -#define RGBLIGHT_SLEEP #define RGBLIGHT_EFFECT_BREATHING #define RGBLIGHT_EFFECT_RAINBOW_MOOD #define RGBLIGHT_EFFECT_RAINBOW_SWIRL diff --git a/keyboards/alpine65/info.json b/keyboards/alpine65/info.json index e290606d8c..51357fb0c9 100644 --- a/keyboards/alpine65/info.json +++ b/keyboards/alpine65/info.json @@ -9,7 +9,9 @@ "device_version": "0.0.1" }, "rgblight": { - "max_brightness": 200 + "led_count": 68, + "max_brightness": 200, + "sleep": true }, "ws2812": { "pin": "B15" diff --git a/keyboards/alpine65/rules.mk b/keyboards/alpine65/rules.mk index 8e1200c9f5..747e719be4 100644 --- a/keyboards/alpine65/rules.mk +++ b/keyboards/alpine65/rules.mk @@ -11,5 +11,3 @@ BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality RGBLIGHT_ENABLE = yes # Enable keyboard RGB underglow ENCODER_ENABLE = no -# Enter lower-power sleep mode when on the ChibiOS idle thread -OPT_DEFS += -DCORTEX_ENABLE_WFI_IDLE=TRUE diff --git a/keyboards/amag23/config.h b/keyboards/amag23/config.h index 34e622bfb3..d04d1b238e 100644 --- a/keyboards/amag23/config.h +++ b/keyboards/amag23/config.h @@ -15,7 +15,6 @@ */ #pragma once -#define RGBLED_NUM 7 #define RGBLIGHT_EFFECT_BREATHING #define RGBLIGHT_EFFECT_RAINBOW_MOOD #define RGBLIGHT_EFFECT_RAINBOW_SWIRL @@ -27,10 +26,6 @@ #define RGBLIGHT_EFFECT_ALTERNATING #define RGBLIGHT_EFFECT_TWINKLE -#define RGBLIGHT_HUE_STEP 8 -#define RGBLIGHT_SAT_STEP 8 -#define RGBLIGHT_VAL_STEP 8 - /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ #define LOCKING_SUPPORT_ENABLE /* Locking resynchronize hack */ diff --git a/keyboards/amag23/info.json b/keyboards/amag23/info.json index 9ee25d06d8..8b6bcb67c7 100644 --- a/keyboards/amag23/info.json +++ b/keyboards/amag23/info.json @@ -8,6 +8,11 @@ "pid": "0x2323", "device_version": "0.0.1" }, + "rgblight": { + "saturation_steps": 8, + "brightness_steps": 8, + "led_count": 7 + }, "ws2812": { "driver": "i2c" }, diff --git a/keyboards/amjkeyboard/amj40/config.h b/keyboards/amjkeyboard/amj40/config.h index 9ec9dcbbeb..f857aafc50 100755 --- a/keyboards/amjkeyboard/amj40/config.h +++ b/keyboards/amjkeyboard/amj40/config.h @@ -35,10 +35,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #define RGBLIGHT_EFFECT_RGB_TEST #define RGBLIGHT_EFFECT_ALTERNATING #define RGBLIGHT_EFFECT_TWINKLE -#define RGBLED_NUM 4 // Number of LEDs -#define RGBLIGHT_HUE_STEP 10 -#define RGBLIGHT_SAT_STEP 17 -#define RGBLIGHT_VAL_STEP 17 /* * Feature disable options diff --git a/keyboards/amjkeyboard/amj40/info.json b/keyboards/amjkeyboard/amj40/info.json index a3bbb13785..3ba95145aa 100644 --- a/keyboards/amjkeyboard/amj40/info.json +++ b/keyboards/amjkeyboard/amj40/info.json @@ -17,6 +17,10 @@ "pin": "B6", "levels": 4 }, + "rgblight": { + "hue_steps": 10, + "led_count": 4 + }, "ws2812": { "pin": "D3" }, diff --git a/keyboards/amjkeyboard/amj60/config.h b/keyboards/amjkeyboard/amj60/config.h index c94d803db5..06338d2a2d 100644 --- a/keyboards/amjkeyboard/amj60/config.h +++ b/keyboards/amjkeyboard/amj60/config.h @@ -17,11 +17,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #pragma once -# define RGBLED_NUM 8 -# define RGBLIGHT_HUE_STEP 10 -# define RGBLIGHT_SAT_STEP 17 -# define RGBLIGHT_VAL_STEP 17 -//# define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */ # define RGBLIGHT_EFFECT_BREATHING # define RGBLIGHT_EFFECT_RAINBOW_MOOD # define RGBLIGHT_EFFECT_RAINBOW_SWIRL diff --git a/keyboards/amjkeyboard/amj60/info.json b/keyboards/amjkeyboard/amj60/info.json index 236db9bd08..a031cc307d 100644 --- a/keyboards/amjkeyboard/amj60/info.json +++ b/keyboards/amjkeyboard/amj60/info.json @@ -18,6 +18,10 @@ "levels": 4, "breathing": true }, + "rgblight": { + "hue_steps": 10, + "led_count": 8 + }, "ws2812": { "pin": "E2" }, diff --git a/keyboards/amjkeyboard/amj96/config.h b/keyboards/amjkeyboard/amj96/config.h index 5060c17f3f..7c5bd8f668 100644 --- a/keyboards/amjkeyboard/amj96/config.h +++ b/keyboards/amjkeyboard/amj96/config.h @@ -36,11 +36,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. /* COL2ROW, ROW2COL*/ #define DIODE_DIRECTION COL2ROW -# define RGBLED_NUM 16 -//# define RGBLIGHT_HUE_STEP 8 -//# define RGBLIGHT_SAT_STEP 8 -//# define RGBLIGHT_VAL_STEP 8 -//# define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */ # define RGBLIGHT_EFFECT_BREATHING # define RGBLIGHT_EFFECT_RAINBOW_MOOD # define RGBLIGHT_EFFECT_RAINBOW_SWIRL diff --git a/keyboards/amjkeyboard/amj96/info.json b/keyboards/amjkeyboard/amj96/info.json index 23bfedd721..45dade12f8 100644 --- a/keyboards/amjkeyboard/amj96/info.json +++ b/keyboards/amjkeyboard/amj96/info.json @@ -8,6 +8,9 @@ "pid": "0x6074", "device_version": "0.0.2" }, + "rgblight": { + "led_count": 16 + }, "ws2812": { "pin": "D3" }, diff --git a/keyboards/amjkeyboard/amjpad/config.h b/keyboards/amjkeyboard/amjpad/config.h index ecd9f99ed9..f857aafc50 100644 --- a/keyboards/amjkeyboard/amjpad/config.h +++ b/keyboards/amjkeyboard/amjpad/config.h @@ -36,11 +36,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #define RGBLIGHT_EFFECT_ALTERNATING #define RGBLIGHT_EFFECT_TWINKLE -#define RGBLED_NUM 8 // Number of LEDs -#define RGBLIGHT_HUE_STEP 10 -#define RGBLIGHT_SAT_STEP 17 -#define RGBLIGHT_VAL_STEP 17 - /* * Feature disable options * These options are also useful to firmware size reduction. diff --git a/keyboards/amjkeyboard/amjpad/info.json b/keyboards/amjkeyboard/amjpad/info.json index d5e1b042f4..e29a2a90d9 100644 --- a/keyboards/amjkeyboard/amjpad/info.json +++ b/keyboards/amjkeyboard/amjpad/info.json @@ -17,6 +17,10 @@ "pin": "B6", "levels": 4 }, + "rgblight": { + "hue_steps": 10, + "led_count": 8 + }, "ws2812": { "pin": "E2" }, diff --git a/keyboards/anavi/macropad8/config.h b/keyboards/anavi/macropad8/config.h index cce2b5bc14..b2bad3e01c 100644 --- a/keyboards/anavi/macropad8/config.h +++ b/keyboards/anavi/macropad8/config.h @@ -17,9 +17,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #pragma once -#define RGBLIGHT_SLEEP - - /* ws2812B RGB LED */ #ifdef RGBLIGHT_ENABLE # define RGBLIGHT_EFFECT_BREATHING @@ -32,10 +29,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. # define RGBLIGHT_EFFECT_RGB_TEST # define RGBLIGHT_EFFECT_ALTERNATING # define RGBLIGHT_EFFECT_TWINKLE -# define RGBLED_NUM 4 -# define RGBLIGHT_HUE_STEP 10 -# define RGBLIGHT_SAT_STEP 17 -# define RGBLIGHT_VAL_STEP 17 #endif #ifdef OLED_ENABLE diff --git a/keyboards/anavi/macropad8/info.json b/keyboards/anavi/macropad8/info.json index 1fa276d94e..b21f12b7d7 100644 --- a/keyboards/anavi/macropad8/info.json +++ b/keyboards/anavi/macropad8/info.json @@ -12,6 +12,11 @@ "pin": "D7", "breathing": true }, + "rgblight": { + "hue_steps": 10, + "led_count": 4, + "sleep": true + }, "ws2812": { "pin": "F4" }, diff --git a/keyboards/ano/config.h b/keyboards/ano/config.h index 296abfa02e..fff04f05b3 100644 --- a/keyboards/ano/config.h +++ b/keyboards/ano/config.h @@ -16,8 +16,6 @@ #pragma once -#define TAP_CODE_DELAY 10 - /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ #define LOCKING_SUPPORT_ENABLE /* Locking resynchronize hack */ diff --git a/keyboards/ano/info.json b/keyboards/ano/info.json index 146e0cad7f..ce88965500 100644 --- a/keyboards/ano/info.json +++ b/keyboards/ano/info.json @@ -18,6 +18,9 @@ {"pin_a": "B12", "pin_b": "A14", "resolution": 2} ] }, + "qmk": { + "tap_keycode_delay": 10 + }, "processor": "STM32F303", "bootloader": "stm32-dfu", "layouts": { diff --git a/keyboards/aos/tkl/config.h b/keyboards/aos/tkl/config.h index a30a446491..63bf09d603 100644 --- a/keyboards/aos/tkl/config.h +++ b/keyboards/aos/tkl/config.h @@ -31,7 +31,3 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. # define RGBLIGHT_EFFECT_RGB_TEST # define RGBLIGHT_EFFECT_ALTERNATING # define RGBLIGHT_EFFECT_TWINKLE -# define RGBLED_NUM 88 -# define RGBLIGHT_HUE_STEP 8 -# define RGBLIGHT_SAT_STEP 8 -# define RGBLIGHT_VAL_STEP 8 diff --git a/keyboards/aos/tkl/info.json b/keyboards/aos/tkl/info.json index 9b4f70a7ef..cd889141f4 100644 --- a/keyboards/aos/tkl/info.json +++ b/keyboards/aos/tkl/info.json @@ -11,6 +11,9 @@ "pin": "E6" }, "rgblight": { + "saturation_steps": 8, + "brightness_steps": 8, + "led_count": 88, "max_brightness": 50 }, "matrix_pins": { diff --git a/keyboards/aplyard/aplx6/rev2/config.h b/keyboards/aplyard/aplx6/rev2/config.h deleted file mode 100644 index 2724ccf117..0000000000 --- a/keyboards/aplyard/aplx6/rev2/config.h +++ /dev/null @@ -1,22 +0,0 @@ -/* -Copyright 2020 April Aplyard <alex.fragiou@gmail.com> - -This program is free software: you can redistribute it and/or modify -it under the terms of the GNU General Public License as published by -the Free Software Foundation, either version 2 of the License, or -(at your option) any later version. - -This program is distributed in the hope that it will be useful, -but WITHOUT ANY WARRANTY; without even the implied warranty of -MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -GNU General Public License for more details. - -You should have received a copy of the GNU General Public License -along with this program. If not, see <http://www.gnu.org/licenses/>. -*/ - -#pragma once - -#define TAPPING_TERM 200 - -#define TAP_CODE_DELAY 50 diff --git a/keyboards/aplyard/aplx6/rev2/info.json b/keyboards/aplyard/aplx6/rev2/info.json index 2dc54180eb..06e0296b68 100644 --- a/keyboards/aplyard/aplx6/rev2/info.json +++ b/keyboards/aplyard/aplx6/rev2/info.json @@ -13,6 +13,9 @@ {"pin_a": "F5", "pin_b": "F4"} ] }, + "qmk": { + "tap_keycode_delay": 50 + }, "processor": "atmega32u4", "bootloader": "caterina", "layouts": { diff --git a/keyboards/arabica37/rev1/config.h b/keyboards/arabica37/rev1/config.h deleted file mode 100644 index 07d567be65..0000000000 --- a/keyboards/arabica37/rev1/config.h +++ /dev/null @@ -1,37 +0,0 @@ -/* -Copyright 2012 Jun Wako <wakojun@gmail.com> -Copyright 2015 Jack Humbert - -This program is free software: you can redistribute it and/or modify -it under the terms of the GNU General Public License as published by -the Free Software Foundation, either version 2 of the License, or -(at your option) any later version. - -This program is distributed in the hope that it will be useful, -but WITHOUT ANY WARRANTY; without even the implied warranty of -MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -GNU General Public License for more details. - -You should have received a copy of the GNU General Public License -along with this program. If not, see <http://www.gnu.org/licenses/>. -*/ - -#pragma once - -#define RGBLED_NUM 50 // Number of LEDs -#define RGBLED_SPLIT {25, 25} -/* - * Feature disable options - * These options are also useful to firmware size reduction. - */ - -/* disable debug print */ -// #define NO_DEBUG - -/* disable print */ -// #define NO_PRINT - -/* disable action features */ -//#define NO_ACTION_LAYER -//#define NO_ACTION_TAPPING -//#define NO_ACTION_ONESHOT diff --git a/keyboards/arabica37/rev1/info.json b/keyboards/arabica37/rev1/info.json index a543a83fd9..14d0c01cb9 100644 --- a/keyboards/arabica37/rev1/info.json +++ b/keyboards/arabica37/rev1/info.json @@ -16,6 +16,10 @@ "split": { "soft_serial_pin": "D2" }, + "rgblight": { + "led_count": 50, + "split_count": [25, 25] + }, "ws2812": { "pin": "D3" }, diff --git a/keyboards/ares/config.h b/keyboards/ares/config.h index ddc21dae30..d849732a07 100644 --- a/keyboards/ares/config.h +++ b/keyboards/ares/config.h @@ -17,9 +17,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #pragma once - -#define RGBLED_NUM 16 - #define RGBLIGHT_EFFECT_BREATHING #define RGBLIGHT_EFFECT_RAINBOW_MOOD #define RGBLIGHT_EFFECT_RAINBOW_SWIRL diff --git a/keyboards/ares/info.json b/keyboards/ares/info.json index 81646cb00c..333e883a5e 100644 --- a/keyboards/ares/info.json +++ b/keyboards/ares/info.json @@ -22,6 +22,9 @@ "bootmagic": { "matrix": [4, 0] }, + "rgblight": { + "led_count": 16 + }, "ws2812": { "driver": "i2c" }, diff --git a/keyboards/ash1800/ash1800.c b/keyboards/ash1800/ash1800.c deleted file mode 100644 index 520b1503ac..0000000000 --- a/keyboards/ash1800/ash1800.c +++ /dev/null @@ -1,25 +0,0 @@ -/* Copyright 2019 angelbirth - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see <http://www.gnu.org/licenses/>. - */ -#include "quantum.h" - -bool led_update_kb(led_t led_state) { - if (led_update_user(led_state)) { - writePin(NUM_LOCK_LED_PIN, !led_state.num_lock); - writePin(CAPS_LOCK_LED_PIN, !led_state.caps_lock); - writePin(SCROLL_LOCK_LED_PIN, !led_state.scroll_lock); - } - return true; -}
\ No newline at end of file diff --git a/keyboards/ash1800/config.h b/keyboards/ash1800/config.h index 2f259d40f6..75e72d0e22 100644 --- a/keyboards/ash1800/config.h +++ b/keyboards/ash1800/config.h @@ -17,10 +17,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #pragma once -#define NUM_LOCK_LED_PIN E6 -#define CAPS_LOCK_LED_PIN F0 -#define SCROLL_LOCK_LED_PIN F7 - /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ #define LOCKING_SUPPORT_ENABLE /* Locking resynchronize hack */ diff --git a/keyboards/ash1800/info.json b/keyboards/ash1800/info.json index e028e09135..658e76962d 100644 --- a/keyboards/ash1800/info.json +++ b/keyboards/ash1800/info.json @@ -7,6 +7,12 @@ "pid": "0x1800", "device_version": "0.0.1" }, + "indicators": { + "caps_lock": "F0", + "num_lock": "E6", + "scroll_lock": "F7", + "on_state": 0 + }, "matrix_pins": { "cols": ["F1", "F4", "F5", "F6", "B0", "B2", "B1", "B3", "B7", "C7"], "rows": ["C6", "B6", "B5", "B4", "D7", "D0", "D1", "D2", "D3", "D5", "D4", "D6"] diff --git a/keyboards/ash_xiix/ash_xiix.c b/keyboards/ash_xiix/ash_xiix.c deleted file mode 100644 index 64be362f93..0000000000 --- a/keyboards/ash_xiix/ash_xiix.c +++ /dev/null @@ -1,25 +0,0 @@ -/* Copyright 2020 sh_xguitar - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see <http://www.gnu.org/licenses/>. - */ -#include "quantum.h" - -bool led_update_kb(led_t led_state) { - if (led_update_user(led_state)) { - writePin(NUM_LOCK_LED_PIN, led_state.num_lock); - writePin(CAPS_LOCK_LED_PIN, led_state.caps_lock); - writePin(SCROLL_LOCK_LED_PIN, led_state.scroll_lock); - } - return true; -} diff --git a/keyboards/ash_xiix/config.h b/keyboards/ash_xiix/config.h index 8f81c450eb..08dd2458c8 100644 --- a/keyboards/ash_xiix/config.h +++ b/keyboards/ash_xiix/config.h @@ -14,10 +14,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #pragma once -#define NUM_LOCK_LED_PIN E6 -#define CAPS_LOCK_LED_PIN F0 -#define SCROLL_LOCK_LED_PIN F7 - /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ #define LOCKING_SUPPORT_ENABLE #define LOCKING_RESYNC_ENABLE diff --git a/keyboards/ash_xiix/info.json b/keyboards/ash_xiix/info.json index 69155f55c1..d9f9964035 100644 --- a/keyboards/ash_xiix/info.json +++ b/keyboards/ash_xiix/info.json @@ -8,6 +8,12 @@ "pid": "0x14BC", "device_version": "0.0.1" }, + "indicators": { + "caps_lock": "F0", + "num_lock": "E6", + "scroll_lock": "F7", + "on_state": 0 + }, "matrix_pins": { "cols": ["F1", "F4", "F5", "F6", "B0", "B2", "B1", "B3", "B7", "C7"], "rows": ["C6", "B6", "B5", "B4", "D7", "D0", "D1", "D2", "D3", "D5", "D4", "D6"] diff --git a/keyboards/at_at/660m/rules.mk b/keyboards/at_at/660m/rules.mk index 0495864be4..e984f8dc96 100644 --- a/keyboards/at_at/660m/rules.mk +++ b/keyboards/at_at/660m/rules.mk @@ -12,5 +12,3 @@ NKRO_ENABLE = yes # Enable N-Key Rollover NO_USB_STARTUP_CHECK = yes # Workaround for issue 6369 -# Enter lower-power sleep mode when on the ChibiOS idle thread -OPT_DEFS += -DCORTEX_ENABLE_WFI_IDLE=TRUE diff --git a/keyboards/atlantis/ak81_ve/config.h b/keyboards/atlantis/ak81_ve/config.h index f300362917..28a4e88893 100644 --- a/keyboards/atlantis/ak81_ve/config.h +++ b/keyboards/atlantis/ak81_ve/config.h @@ -16,9 +16,6 @@ #pragma once -#define ENCODERS_CCW_KEY { { 4, 5 } } // Note: array is { col, row ) -#define ENCODERS_CW_KEY { { 3, 5 } } // Note: array is { col, row ) - /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ #define LOCKING_SUPPORT_ENABLE diff --git a/keyboards/atlantis/ak81_ve/keymaps/via/keymap.c b/keyboards/atlantis/ak81_ve/keymaps/via/keymap.c index 48ffe1be63..08001a6f99 100644 --- a/keyboards/atlantis/ak81_ve/keymaps/via/keymap.c +++ b/keyboards/atlantis/ak81_ve/keymaps/via/keymap.c @@ -16,54 +16,47 @@ #include QMK_KEYBOARD_H -#define LAYOUT_via( \ - K000, K001, K002, K003, K004, K005, K006, K007, K008, K010, K011, K012, K013, K014, \ - K100, K101, K102, K103, K104, K105, K106, K107, K108, K109, K110, K111, K112, K113, K114, \ - K200, K201, K202, K203, K204, K205, K206, K207, K208, K209, K210, K211, K212, K213, K214, \ - K300, K301, K302, K303, K304, K305, K306, K307, K308, K309, K310, K311, K312, K314, \ - K400, K401, K402, K403, K404, K405, K406, K407, K408, K409, K410, K411, K413, K414, \ - K500, K501, K502, K503, K504, K506, K510, K511, K512, K513, K514 \ -) { \ - { K000, K001, K002, K003, K004, K005, K006, K007, K008, KC_NO, K010, K011, K012, K013, K014 }, \ - { K100, K101, K102, K103, K104, K105, K106, K107, K108, K109, K110, K111, K112, K113, K114 }, \ - { K200, K201, K202, K203, K204, K205, K206, K207, K208, K209, K210, K211, K212, K213, K214 }, \ - { K300, K301, K302, K303, K304, K305, K306, K307, K308, K309, K310, K311, K312, KC_NO, K314 }, \ - { K400, K401, K402, K403, K404, K405, K406, K407, K408, K409, K410, K411, KC_NO, K413, K414 }, \ - { K500, K501, K502, K503, K504, KC_NO, K506, KC_NO, KC_NO, KC_NO, K510, K511, K512, K513, K514 } \ -} - const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { - [0] = LAYOUT_via( - KC_ESC, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_DEL, - KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_HOME, - KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_PGUP, - KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, KC_PGDN, - KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_UP, KC_END, - KC_LCTL, KC_LGUI, KC_LALT, KC_VOLU, KC_VOLD, KC_SPC, KC_RALT, MO(1), KC_LEFT, KC_DOWN, KC_RGHT), - - [1] = LAYOUT_via( - KC_SYSTEM_SLEEP, KC_F13, KC_F14, KC_F15, KC_F16, KC_F17, KC_F18, KC_F19, KC_F20, KC_F21, KC_F22, KC_F23, KC_F24, RGB_TOG, - _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, RGB_SPI, - _______, _______, _______, _______, QK_BOOT, _______, _______, _______, _______, _______, KC_PSCR, _______, _______, _______, RGB_VAI, - _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, RGB_VAD, - _______, _______, _______, KC_CALC, _______, _______, _______, KC_MUTE, _______, _______, _______, _______, RGB_HUI, RGB_SPD, - _______, _______, _______, RGB_MOD, RGB_RMOD, _______, _______, _______, RGB_SAD, RGB_HUD, RGB_SAI), - - [2] = LAYOUT_via( - _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, - _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, - _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, - _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, - _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, - _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______), - - [3] = LAYOUT_via( - _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, - _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, - _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, - _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, - _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, - _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______) - -};
\ No newline at end of file + [0] = LAYOUT( + KC_ESC, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_DEL, + KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_HOME, + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_PGUP, + KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, KC_PGDN, + KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_UP, KC_END, + KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_RALT, MO(1), KC_LEFT, KC_DOWN, KC_RGHT), + + [1] = LAYOUT( + KC_SYSTEM_SLEEP, KC_F13, KC_F14, KC_F15, KC_F16, KC_F17, KC_F18, KC_F19, KC_F20, KC_F21, KC_F22, KC_F23, KC_F24, RGB_TOG, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, RGB_SPI, + _______, _______, _______, _______, QK_BOOT, _______, _______, _______, _______, _______, KC_PSCR, _______, _______, _______, RGB_VAI, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, RGB_VAD, + _______, _______, _______, KC_CALC, _______, _______, _______, KC_MUTE, _______, _______, _______, _______, RGB_HUI, RGB_SPD, + _______, _______, _______, _______, _______, _______, RGB_SAD, RGB_HUD, RGB_SAI), + + [2] = LAYOUT( + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______), + + [3] = LAYOUT( + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______) + +}; + +#ifdef ENCODER_MAP_ENABLE +const uint16_t PROGMEM encoder_map[][NUM_ENCODERS][NUM_DIRECTIONS] = { + [0] = { ENCODER_CCW_CW(KC_VOLD, KC_VOLU) }, + [1] = { ENCODER_CCW_CW(RGB_RMOD, RGB_MOD) }, + [2] = { ENCODER_CCW_CW(_______, _______) }, + [3] = { ENCODER_CCW_CW(_______, _______) }, +}; +#endif diff --git a/keyboards/atlantis/ak81_ve/keymaps/via/rules.mk b/keyboards/atlantis/ak81_ve/keymaps/via/rules.mk index f74ca2c244..f1adcab005 100644 --- a/keyboards/atlantis/ak81_ve/keymaps/via/rules.mk +++ b/keyboards/atlantis/ak81_ve/keymaps/via/rules.mk @@ -1,3 +1,2 @@ VIA_ENABLE = yes - -SRC += encoder_actions.c
\ No newline at end of file +ENCODER_MAP_ENABLE = yes diff --git a/keyboards/atlantis/encoder_actions.c b/keyboards/atlantis/encoder_actions.c deleted file mode 100644 index 126b665a8e..0000000000 --- a/keyboards/atlantis/encoder_actions.c +++ /dev/null @@ -1,63 +0,0 @@ -/* Copyright 2020 Neil Brian Ramirez - * Copyright 2021 drashna jael're (@drashna) - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 3 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see <http://www.gnu.org/licenses/>. - */ - -#include "encoder_actions.h" - -#if defined(VIA_ENABLE) && defined(ENCODER_ENABLE) -static uint8_t encoder_state[NUM_ENCODERS] = {0}; -static keypos_t encoder_cw[NUM_ENCODERS] = ENCODERS_CW_KEY; -static keypos_t encoder_ccw[NUM_ENCODERS] = ENCODERS_CCW_KEY; - -void encoder_action_unregister(void) { - for (int index = 0; index < NUM_ENCODERS; ++index) { - if (encoder_state[index]) { - keyevent_t encoder_event = (keyevent_t) { - .key = encoder_state[index] >> 1 ? encoder_cw[index] : encoder_ccw[index], - .pressed = false, - .time = timer_read(), - .type = KEY_EVENT - }; - encoder_state[index] = 0; - action_exec(encoder_event); - } - } -} - -void encoder_action_register(uint8_t index, bool clockwise) { - keyevent_t encoder_event = (keyevent_t) { - .key = clockwise ? encoder_cw[index] : encoder_ccw[index], - .pressed = true, - .time = timer_read(), - .type = KEY_EVENT - }; - encoder_state[index] = (clockwise ^ 1) | (clockwise << 1); - action_exec(encoder_event); -} - -void matrix_scan_kb(void) { - encoder_action_unregister(); - matrix_scan_user(); -} - -bool encoder_update_kb(uint8_t index, bool clockwise) { - encoder_action_register(index, clockwise); - // don't return user actions, because they are in the keymap - // encoder_update_user(index, clockwise); - return true; -}; - -#endif diff --git a/keyboards/atlantis/encoder_actions.h b/keyboards/atlantis/encoder_actions.h deleted file mode 100644 index 1a7fb72014..0000000000 --- a/keyboards/atlantis/encoder_actions.h +++ /dev/null @@ -1,23 +0,0 @@ -/* Copyright 2020 Neil Brian Ramirez - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 3 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see <http://www.gnu.org/licenses/>. - */ - -#pragma once - -#include "quantum.h" - -void encoder_action_unregister(void); - -void encoder_action_register(uint8_t index, bool clockwise); diff --git a/keyboards/atreus/f103/rules.mk b/keyboards/atreus/f103/rules.mk index 9755a4a3c2..22634018d2 100644 --- a/keyboards/atreus/f103/rules.mk +++ b/keyboards/atreus/f103/rules.mk @@ -1,4 +1,2 @@ -# Enter lower-power sleep mode when on the ChibiOS idle thread -OPT_DEFS += -DCORTEX_ENABLE_WFI_IDLE=TRUE BOOTMAGIC_ENABLE = yes
\ No newline at end of file diff --git a/keyboards/atreus/keymaps/ridingqwerty/keymap.c b/keyboards/atreus/keymaps/ridingqwerty/keymap.c index 1eeb17fd17..9b0826402e 100644 --- a/keyboards/atreus/keymaps/ridingqwerty/keymap.c +++ b/keyboards/atreus/keymaps/ridingqwerty/keymap.c @@ -46,7 +46,7 @@ { K75, K74, K73, K72, K71, K70 } \ } -//#define ALPHA XP(UCM_LDEL, UCM_UDEL) +//#define ALPHA UP(UCM_LDEL, UCM_UDEL) const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { [_QWERTY] = LAYOUT_atreus_wrapper( /* Qwerty */ diff --git a/keyboards/atxkb/1894/config.h b/keyboards/atxkb/1894/config.h index 2542b9f62f..c920b83bc9 100644 --- a/keyboards/atxkb/1894/config.h +++ b/keyboards/atxkb/1894/config.h @@ -17,11 +17,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #pragma once - #define RGBLED_NUM 14 - #define RGBLIGHT_HUE_STEP 8 - #define RGBLIGHT_SAT_STEP 8 - #define RGBLIGHT_VAL_STEP 8 - #define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */ # define RGBLIGHT_EFFECT_BREATHING # define RGBLIGHT_EFFECT_RAINBOW_MOOD # define RGBLIGHT_EFFECT_RAINBOW_SWIRL diff --git a/keyboards/atxkb/1894/info.json b/keyboards/atxkb/1894/info.json index 1f101bd9de..39394834ab 100644 --- a/keyboards/atxkb/1894/info.json +++ b/keyboards/atxkb/1894/info.json @@ -18,6 +18,12 @@ "levels": 5, "breathing": true }, + "rgblight": { + "saturation_steps": 8, + "brightness_steps": 8, + "led_count": 14, + "sleep": true + }, "ws2812": { "pin": "D2" }, diff --git a/keyboards/aurora65/config.h b/keyboards/aurora65/config.h index fad29eeec2..956053707f 100644 --- a/keyboards/aurora65/config.h +++ b/keyboards/aurora65/config.h @@ -26,10 +26,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #define WS2812_DMA_CHANNEL 5 #define WS2812_BYTE_ORDER WS2812_BYTE_ORDER_RGB -#define RGBLED_NUM 36 -#define RGBLIGHT_HUE_STEP 8 -#define RGBLIGHT_SAT_STEP 8 -#define RGBLIGHT_VAL_STEP 8 #define RGBLIGHT_EFFECT_BREATHING #define RGBLIGHT_EFFECT_RAINBOW_MOOD #define RGBLIGHT_EFFECT_RAINBOW_SWIRL diff --git a/keyboards/aurora65/info.json b/keyboards/aurora65/info.json index fd03acb5bd..986732d51a 100644 --- a/keyboards/aurora65/info.json +++ b/keyboards/aurora65/info.json @@ -8,6 +8,11 @@ "pid": "0x4136", "device_version": "0.0.1" }, + "rgblight": { + "saturation_steps": 8, + "brightness_steps": 8, + "led_count": 36 + }, "ws2812": { "pin": "B15", "driver": "pwm" diff --git a/keyboards/aurora65/rules.mk b/keyboards/aurora65/rules.mk index 000ee78e21..cc9d7bb3f5 100644 --- a/keyboards/aurora65/rules.mk +++ b/keyboards/aurora65/rules.mk @@ -1,11 +1,6 @@ # Wildcard to allow APM32 MCU DFU_SUFFIX_ARGS = -v FFFF -p FFFF -# Do not put the microcontroller into power saving mode -# when we get USB suspend event. We want it to keep updating -# backlight effects. -OPT_DEFS += -DCORTEX_ENABLE_WFI_IDLE=TRUE - # Build Options # change yes to no to disable # diff --git a/keyboards/avalanche/v2/config.h b/keyboards/avalanche/v2/config.h deleted file mode 100644 index 5d7c1c2047..0000000000 --- a/keyboards/avalanche/v2/config.h +++ /dev/null @@ -1,8 +0,0 @@ -// Copyright 2022 Vitaly Volkov (@vlkv) -// SPDX-License-Identifier: GPL-2.0-or-later - -#pragma once - -#define RGBLED_NUM 12 -#define RGBLED_SPLIT { 6, 6 } -#define RGBLIGHT_SPLIT diff --git a/keyboards/avalanche/v2/info.json b/keyboards/avalanche/v2/info.json index 92f02721de..62c284a845 100644 --- a/keyboards/avalanche/v2/info.json +++ b/keyboards/avalanche/v2/info.json @@ -18,6 +18,10 @@ {"pin_a": "B5", "pin_b": "F4", "resolution": 2} ] }, + "rgblight": { + "led_count": 12, + "split_count": [6, 6] + }, "ws2812": { "pin": "D3" }, diff --git a/keyboards/avalanche/v3/config.h b/keyboards/avalanche/v3/config.h deleted file mode 100644 index c6042255e3..0000000000 --- a/keyboards/avalanche/v3/config.h +++ /dev/null @@ -1,8 +0,0 @@ -// Copyright 2022 Vitaly Volkov (@vlkv) -// SPDX-License-Identifier: GPL-2.0-or-later - -#pragma once - -#define RGBLED_NUM 12 -#define RGBLED_SPLIT { 7, 7 } -#define RGBLIGHT_SPLIT diff --git a/keyboards/avalanche/v3/info.json b/keyboards/avalanche/v3/info.json index ed507485f5..8cf8187df7 100644 --- a/keyboards/avalanche/v3/info.json +++ b/keyboards/avalanche/v3/info.json @@ -21,6 +21,10 @@ "split": { "soft_serial_pin": "D2" }, + "rgblight": { + "led_count": 12, + "split_count": [7, 7] + }, "ws2812": { "pin": "D3" }, diff --git a/keyboards/avalanche/v4/config.h b/keyboards/avalanche/v4/config.h index 51b7cb7537..b1f1833c2e 100644 --- a/keyboards/avalanche/v4/config.h +++ b/keyboards/avalanche/v4/config.h @@ -4,13 +4,6 @@ #pragma once #ifdef RGBLIGHT_ENABLE -# define RGBLED_NUM 64 -# define RGBLED_SPLIT { 32, 32 } -# define RGBLIGHT_SPLIT -# define RGBLIGHT_HUE_STEP 10 -# define RGBLIGHT_SAT_STEP 17 -# define RGBLIGHT_VAL_STEP 17 - # define RGBLIGHT_DEFAULT_MODE RGBLIGHT_MODE_RAINBOW_SWIRL+2 # define RGBLIGHT_EFFECT_ALTERNATING @@ -22,29 +15,6 @@ # define RGBLIGHT_EFFECT_KNIGHT # define RGBLIGHT_EFFECT_SNAKE # define RGBLIGHT_EFFECT_CHRISTMAS - - -// RGB LED Conversion macro from physical array to electric array. This results in better looking animated effects. -# define LED_LAYOUT( \ - /* LED matrix */ \ - L01, L02, L03, L04, L05, L06, L011, L012, L013, L014, L015, L016, \ - L11, L12, L13, L14, L15, L16, L111, L112, L113, L114, L115, L116, \ - L20, L21, L22, L23, L24, L25, L26, L211, L212, L213, L214, L215, L216, L217, \ - L31, L32, L33, L34, L35, L36, L37, L38, L39, L310, L311, L312, L313, L314, L315, L316, \ - L44, L45, L46, L47, L48, L49, L410, L411, L412, L413 )\ - { \ - /* left half - electrical wiring order */ \ - L47,L48,L38,L37,L36,L26,L16,L06,L05,L15,L25,L35,L46,L45,L34,L24,L14,L04,L03,L13,L23,L33,L44,L32,L22,L12,L02,L01,L11,L21,L31,L20, \ - /* right half - electrical wiring order */ \ - L410,L49,L39,L310,L311,L211,L111,L011,L012,L112,L212,L312,L411,L412,L313,L213,L113,L013,L014,L114,L214,L314,L413,L315,L215,L115,L015,L016,L116,L216,L316,L217 \ - } -# define RGBLIGHT_LED_MAP LED_LAYOUT( \ - /* animation order. */ \ - 4, 8, 12, 17, 22, 27, 40, 45, 50, 54, 58, 62, \ - 3, 7, 11, 16, 21, 26, 39, 44, 49, 53, 57, 61, \ - 0, 2, 6, 10, 15, 20, 25, 38, 43, 48, 52, 56, 60, 63, \ - 1, 5, 9, 14, 19, 24, 29, 31, 33, 35, 37, 42, 47, 51, 55, 59, \ - 13, 18, 23, 28, 30, 32, 34, 36, 41, 46 ) #endif #ifdef OLED_ENABLE diff --git a/keyboards/avalanche/v4/info.json b/keyboards/avalanche/v4/info.json index 235bb12220..3efed01d45 100644 --- a/keyboards/avalanche/v4/info.json +++ b/keyboards/avalanche/v4/info.json @@ -25,7 +25,11 @@ "pin": "D3" }, "rgblight": { - "max_brightness": 100 + "hue_steps": 10, + "led_count": 64, + "max_brightness": 100, + "led_map": [28, 30, 31, 29, 24, 25, 26, 27, 22, 21, 20, 19, 23, 18, 14, 15, 16, 17, 12, 11, 10, 9, 13, 5, 6, 7, 8, 4, 3, 2, 1, 0, 34, 32, 33, 35, 37, 38, 39, 40, 45, 44, 43, 42, 36, 41, 47, 48, 49, 50, 54, 53, 52, 51, 46, 55, 56, 57, 58, 62, 61, 60, 59, 63], + "split_count": [32, 32] }, "processor": "atmega32u4", "bootloader": "caterina", diff --git a/keyboards/aves60/config.h b/keyboards/aves60/config.h index 7b3a528629..bb7c5f2c34 100644 --- a/keyboards/aves60/config.h +++ b/keyboards/aves60/config.h @@ -3,11 +3,6 @@ #pragma once -#define RGBLED_NUM 9 -//# define RGBLIGHT_HUE_STEP 8 -//# define RGBLIGHT_SAT_STEP 8 -//# define RGBLIGHT_VAL_STEP 8 -//# define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */ /*== or choose animations ==*/ #define RGBLIGHT_EFFECT_BREATHING #define RGBLIGHT_EFFECT_RAINBOW_MOOD diff --git a/keyboards/aves60/info.json b/keyboards/aves60/info.json index eaa74b4fbb..b8c9468f31 100644 --- a/keyboards/aves60/info.json +++ b/keyboards/aves60/info.json @@ -16,6 +16,9 @@ "bootmagic": { "matrix": [4, 6] }, + "rgblight": { + "led_count": 9 + }, "ws2812": { "pin": "D5" }, diff --git a/keyboards/aves65/config.h b/keyboards/aves65/config.h index 05d7e7fb16..41190f44ed 100644 --- a/keyboards/aves65/config.h +++ b/keyboards/aves65/config.h @@ -34,4 +34,3 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #define RGBLIGHT_EFFECT_RGB_TEST #define RGBLIGHT_EFFECT_ALTERNATING #define RGBLIGHT_EFFECT_TWINKLE -#define RGBLED_NUM 9 diff --git a/keyboards/aves65/info.json b/keyboards/aves65/info.json index 38e619a0aa..2cda8da3b1 100644 --- a/keyboards/aves65/info.json +++ b/keyboards/aves65/info.json @@ -17,6 +17,9 @@ "esc_input": "D4", "esc_output": "D0" }, + "rgblight": { + "led_count": 9 + }, "ws2812": { "pin": "B0" }, diff --git a/keyboards/baion_808/rules.mk b/keyboards/baion_808/rules.mk index 5d2ff62877..11c4a00e5a 100755..100644 --- a/keyboards/baion_808/rules.mk +++ b/keyboards/baion_808/rules.mk @@ -1,11 +1,6 @@ # Wildcard to allow APM32 MCU DFU_SUFFIX_ARGS = -v FFFF -p FFFF -# Do not put the microcontroller into power saving mode -# when we get USB suspend event. We want it to keep updating -# backlight effects. -OPT_DEFS += -DCORTEX_ENABLE_WFI_IDLE=TRUE - # Build Options # change yes to no to disable # diff --git a/keyboards/bajjak/config.h b/keyboards/bajjak/config.h index 614d7a7813..72d296bca4 100644 --- a/keyboards/bajjak/config.h +++ b/keyboards/bajjak/config.h @@ -43,10 +43,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #define MOUSEKEY_MAX_SPEED 7 #define MOUSEKEY_WHEEL_DELAY 0 -#define TAPPING_TOGGLE 1 - -#define TAPPING_TERM 200 - /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ #define LOCKING_SUPPORT_ENABLE /* Locking resynchronize hack */ diff --git a/keyboards/bajjak/info.json b/keyboards/bajjak/info.json index a280cb9ed8..37bfafa262 100644 --- a/keyboards/bajjak/info.json +++ b/keyboards/bajjak/info.json @@ -10,6 +10,9 @@ }, "processor": "atmega32u4", "bootloader": "halfkay", + "tapping": { + "toggle": 1 + }, "layouts": { "LAYOUT_6x7": { "layout": [ diff --git a/keyboards/bandominedoni/config.h b/keyboards/bandominedoni/config.h index 91a4eb0ae8..df0ebb0fdc 100644 --- a/keyboards/bandominedoni/config.h +++ b/keyboards/bandominedoni/config.h @@ -137,5 +137,3 @@ // Initial velocity value (avoid using 127 since it is used as a special number in some sound sources.) # define MIDI_INITIAL_VELOCITY 117 #endif // MIDI_ENABLE - -#define TAP_CODE_DELAY 10 diff --git a/keyboards/bandominedoni/info.json b/keyboards/bandominedoni/info.json index c4dfe46d74..9f069f771c 100644 --- a/keyboards/bandominedoni/info.json +++ b/keyboards/bandominedoni/info.json @@ -26,6 +26,9 @@ } } }, + "qmk": { + "tap_keycode_delay": 10 + }, "ws2812": { "pin": "D3" }, diff --git a/keyboards/barleycorn_smd/config.h b/keyboards/barleycorn_smd/config.h index 167c3b5c87..2ed9bc00ba 100644 --- a/keyboards/barleycorn_smd/config.h +++ b/keyboards/barleycorn_smd/config.h @@ -38,7 +38,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #define MATRIX_COL_PINS { D4, D6, D7, B4, B5, B6, C6, C7, D5, D5, D5, D5, D5, D5, D5, D5, D5, D5 } #define PORT_EXPANDER_ADDRESS 0x20 -#define RGBLED_NUM 15 #define RGBLIGHT_EFFECT_BREATHING #define RGBLIGHT_EFFECT_RAINBOW_MOOD #define RGBLIGHT_EFFECT_RAINBOW_SWIRL @@ -49,7 +48,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #define RGBLIGHT_EFFECT_RGB_TEST #define RGBLIGHT_EFFECT_ALTERNATING #define RGBLIGHT_EFFECT_TWINKLE -#define RGBLIGHT_LED_MAP { 0, 1, 2, 3, 4, 6, 7, 8, 9, 10, 11, 12, 13, 14, 5 } /* COL2ROW, ROW2COL*/ #define DIODE_DIRECTION COL2ROW diff --git a/keyboards/barleycorn_smd/info.json b/keyboards/barleycorn_smd/info.json index 0f759e5f4d..39516649b1 100644 --- a/keyboards/barleycorn_smd/info.json +++ b/keyboards/barleycorn_smd/info.json @@ -12,6 +12,10 @@ "caps_lock": "B2", "num_lock": "B3" }, + "rgblight": { + "led_count": 15, + "led_map": [0, 1, 2, 3, 4, 6, 7, 8, 9, 10, 11, 12, 13, 14, 5] + }, "ws2812": { "pin": "E6" }, diff --git a/keyboards/basekeys/slice/rev1_rgb/config.h b/keyboards/basekeys/slice/rev1_rgb/config.h index 996e538ae3..975b0f0f90 100644 --- a/keyboards/basekeys/slice/rev1_rgb/config.h +++ b/keyboards/basekeys/slice/rev1_rgb/config.h @@ -28,11 +28,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. /* RGB LED */ #ifdef RGBLIGHT_ENABLE -#define RGBLED_NUM 69 // Number of LEDs. backlight x69 -#define RGBLED_SPLIT { 34, 35 } -#define RGBLIGHT_HUE_STEP 10 -#define RGBLIGHT_SAT_STEP 17 -#define RGBLIGHT_VAL_STEP 17 #define RGBLIGHT_EFFECT_BREATHING #define RGBLIGHT_EFFECT_RAINBOW_MOOD #define RGBLIGHT_EFFECT_RAINBOW_SWIRL diff --git a/keyboards/basekeys/slice/rev1_rgb/info.json b/keyboards/basekeys/slice/rev1_rgb/info.json index 38a6e8398a..947146004c 100644 --- a/keyboards/basekeys/slice/rev1_rgb/info.json +++ b/keyboards/basekeys/slice/rev1_rgb/info.json @@ -20,7 +20,10 @@ "pin": "D3" }, "rgblight": { - "max_brightness": 120 + "hue_steps": 10, + "led_count": 69, + "max_brightness": 120, + "split_count": [34, 35] }, "processor": "atmega32u4", "bootloader": "caterina", diff --git a/keyboards/basekeys/trifecta/config.h b/keyboards/basekeys/trifecta/config.h index 85ae15513e..5a6b326043 100644 --- a/keyboards/basekeys/trifecta/config.h +++ b/keyboards/basekeys/trifecta/config.h @@ -20,10 +20,6 @@ /* RGB LED */ #ifdef RGBLIGHT_ENABLE -#define RGBLED_NUM 80 // Number of LEDs. backlight x69 -#define RGBLIGHT_HUE_STEP 10 -#define RGBLIGHT_SAT_STEP 17 -#define RGBLIGHT_VAL_STEP 17 #define RGBLIGHT_EFFECT_BREATHING #define RGBLIGHT_EFFECT_RAINBOW_MOOD #define RGBLIGHT_EFFECT_RAINBOW_SWIRL @@ -53,10 +49,6 @@ # define RGB_MATRIX_LED_PROCESS_LIMIT (RGB_MATRIX_LED_COUNT + 4) / 5 // limits the number of LEDs to process in an animation per task run (increases keyboard responsiveness) # define RGB_MATRIX_LED_FLUSH_LIMIT 16 // limits in milliseconds how frequently an animation will update the LEDs. 16 (16ms) is equivalent to limiting to 60fps (increases keyboard responsiveness) # define RGB_MATRIX_MAXIMUM_BRIGHTNESS 150 // limits maximum brightness of LEDs to 150 out of 255. Higher may cause the controller to crash. -# define RGB_MATRIX_HUE_STEP 8 -# define RGB_MATRIX_SAT_STEP 8 -# define RGB_MATRIX_VAL_STEP 8 -# define RGB_MATRIX_SPD_STEP 10 /* Disable the animations you don't want/need. You will need to disable a good number of these * * because they take up a lot of space. Disable until you can successfully compile your firmware. */ diff --git a/keyboards/basekeys/trifecta/info.json b/keyboards/basekeys/trifecta/info.json index 3cc2c19f8b..5d35e7210c 100644 --- a/keyboards/basekeys/trifecta/info.json +++ b/keyboards/basekeys/trifecta/info.json @@ -27,8 +27,15 @@ "pin": "E6" }, "rgblight": { + "hue_steps": 10, + "led_count": 80, "max_brightness": 128 }, + "rgb_matrix": { + "sat_steps": 8, + "val_steps": 8, + "speed_steps": 10 + }, "processor": "atmega32u4", "bootloader": "atmel-dfu", "layouts": { diff --git a/keyboards/basketweave/config.h b/keyboards/basketweave/config.h index 36054e7bb6..ebf8596319 100644 --- a/keyboards/basketweave/config.h +++ b/keyboards/basketweave/config.h @@ -20,5 +20,3 @@ #define LOCKING_SUPPORT_ENABLE /* Locking resynchronize hack */ #define LOCKING_RESYNC_ENABLE - -#define TAP_CODE_DELAY 10 diff --git a/keyboards/basketweave/info.json b/keyboards/basketweave/info.json index 8f9be9b406..705ef675ba 100644 --- a/keyboards/basketweave/info.json +++ b/keyboards/basketweave/info.json @@ -19,6 +19,9 @@ {"pin_a": "D7", "pin_b": "C0"} ] }, + "qmk": { + "tap_keycode_delay": 10 + }, "processor": "atmega32a", "bootloader": "usbasploader", "layouts": { diff --git a/keyboards/bastardkb/dilemma/3x5_3/config.h b/keyboards/bastardkb/dilemma/3x5_3/config.h index c5fa0dc192..8604597ff8 100644 --- a/keyboards/bastardkb/dilemma/3x5_3/config.h +++ b/keyboards/bastardkb/dilemma/3x5_3/config.h @@ -41,16 +41,11 @@ #define RP2040_BOOTLOADER_DOUBLE_TAP_RESET_LED GP17 #define RP2040_BOOTLOADER_DOUBLE_TAP_RESET_TIMEOUT 1000U -/* RGB settings. */ -#define RGBLED_NUM 36 -#define RGBLED_SPLIT \ - { 18, 18 } - /* RGB matrix support. */ #ifdef RGB_MATRIX_ENABLE # define SPLIT_TRANSPORT_MIRROR -# define RGB_MATRIX_LED_COUNT RGBLED_NUM -# define RGB_MATRIX_SPLIT RGBLED_SPLIT +# define RGB_MATRIX_LED_COUNT 36 +# define RGB_MATRIX_SPLIT { 18, 18 } # define RGB_MATRIX_MAXIMUM_BRIGHTNESS 50 # define RGB_MATRIX_DEFAULT_VAL RGB_MATRIX_MAXIMUM_BRIGHTNESS # define RGB_DISABLE_WHEN_USB_SUSPENDED diff --git a/keyboards/bastardkb/dilemma/3x5_3/info.json b/keyboards/bastardkb/dilemma/3x5_3/info.json index 57ea2c16df..2ee5d5ea4a 100644 --- a/keyboards/bastardkb/dilemma/3x5_3/info.json +++ b/keyboards/bastardkb/dilemma/3x5_3/info.json @@ -15,6 +15,9 @@ "split": { "soft_serial_pin": "GP1" }, + "rgblight": { + "split_count": [18, 18] + }, "ws2812": { "pin": "GP0", "driver": "vendor" diff --git a/keyboards/bastardkb/scylla/config.h b/keyboards/bastardkb/scylla/config.h index 0ad3ecd17b..33c62549a1 100644 --- a/keyboards/bastardkb/scylla/config.h +++ b/keyboards/bastardkb/scylla/config.h @@ -18,16 +18,11 @@ #pragma once -/* RGB settings. */ -#define RGBLED_NUM 58 -#define RGBLED_SPLIT \ - { 29, 29 } - /* RGB matrix support. */ #ifdef RGB_MATRIX_ENABLE # define SPLIT_TRANSPORT_MIRROR -# define RGB_MATRIX_LED_COUNT RGBLED_NUM -# define RGB_MATRIX_SPLIT RGBLED_SPLIT +# define RGB_MATRIX_LED_COUNT 58 +# define RGB_MATRIX_SPLIT { 29, 29 } # define RGB_MATRIX_MAXIMUM_BRIGHTNESS 50 # define RGB_MATRIX_DEFAULT_VAL RGB_MATRIX_MAXIMUM_BRIGHTNESS # define RGB_DISABLE_WHEN_USB_SUSPENDED diff --git a/keyboards/bastardkb/scylla/info.json b/keyboards/bastardkb/scylla/info.json index 682b2dc6db..24a0262bee 100644 --- a/keyboards/bastardkb/scylla/info.json +++ b/keyboards/bastardkb/scylla/info.json @@ -3,6 +3,10 @@ "usb": { "pid": "0x1829" }, + "rgblight": { + "led_count": 58, + "split_count": [29, 29] + }, "layouts": { "LAYOUT_split_4x6_5": { "layout": [ diff --git a/keyboards/bastardkb/skeletyl/config.h b/keyboards/bastardkb/skeletyl/config.h index 3e282f0f15..a7f9c94387 100644 --- a/keyboards/bastardkb/skeletyl/config.h +++ b/keyboards/bastardkb/skeletyl/config.h @@ -18,16 +18,11 @@ #pragma once -/* RGB settings. */ -#define RGBLED_NUM 36 -#define RGBLED_SPLIT \ - { 18, 18 } - /* RGB matrix support. */ #ifdef RGB_MATRIX_ENABLE # define SPLIT_TRANSPORT_MIRROR -# define RGB_MATRIX_LED_COUNT RGBLED_NUM -# define RGB_MATRIX_SPLIT RGBLED_SPLIT +# define RGB_MATRIX_LED_COUNT 36 +# define RGB_MATRIX_SPLIT { 18, 18 } # define RGB_MATRIX_MAXIMUM_BRIGHTNESS 50 # define RGB_MATRIX_DEFAULT_VAL RGB_MATRIX_MAXIMUM_BRIGHTNESS # define RGB_DISABLE_WHEN_USB_SUSPENDED diff --git a/keyboards/bastardkb/skeletyl/info.json b/keyboards/bastardkb/skeletyl/info.json index b325ca7196..b4bb9ea78e 100644 --- a/keyboards/bastardkb/skeletyl/info.json +++ b/keyboards/bastardkb/skeletyl/info.json @@ -3,6 +3,10 @@ "usb": { "pid": "0x1830" }, + "rgblight": { + "led_count": 36, + "split_count": [18, 18] + }, "community_layouts": ["split_3x5_3"], "layouts": { "LAYOUT_split_3x5_3": { diff --git a/keyboards/bastardkb/tbk/config.h b/keyboards/bastardkb/tbk/config.h index 40a9b2cbeb..19ec26d148 100644 --- a/keyboards/bastardkb/tbk/config.h +++ b/keyboards/bastardkb/tbk/config.h @@ -17,9 +17,6 @@ #pragma once -#define RGBLED_NUM 38 -#define RGBLED_SPLIT { 19, 19 } -#define RGBLIGHT_SPLIT #define RGBLIGHT_EFFECT_BREATHING #define RGBLIGHT_EFFECT_RAINBOW_MOOD #define RGBLIGHT_EFFECT_RAINBOW_SWIRL diff --git a/keyboards/bastardkb/tbk/info.json b/keyboards/bastardkb/tbk/info.json index 7da2d56ad5..62db6d741f 100644 --- a/keyboards/bastardkb/tbk/info.json +++ b/keyboards/bastardkb/tbk/info.json @@ -5,6 +5,10 @@ "device_version": "0.0.1", "pid": "0x1828" }, + "rgblight": { + "led_count": 38, + "split_count": [19, 19] + }, "ws2812": { "pin": "D2" }, diff --git a/keyboards/bastardkb/tbkmini/config.h b/keyboards/bastardkb/tbkmini/config.h index 06c6e3ada4..ea18f4349e 100644 --- a/keyboards/bastardkb/tbkmini/config.h +++ b/keyboards/bastardkb/tbkmini/config.h @@ -18,16 +18,11 @@ #pragma once -/* RGB settings. */ -#define RGBLED_NUM 42 -#define RGBLED_SPLIT \ - { 21, 21 } - /* RGB matrix support. */ #ifdef RGB_MATRIX_ENABLE # define SPLIT_TRANSPORT_MIRROR -# define RGB_MATRIX_LED_COUNT RGBLED_NUM -# define RGB_MATRIX_SPLIT RGBLED_SPLIT +# define RGB_MATRIX_LED_COUNT 42 +# define RGB_MATRIX_SPLIT { 21, 21 } # define RGB_MATRIX_MAXIMUM_BRIGHTNESS 50 # define RGB_MATRIX_DEFAULT_VAL RGB_MATRIX_MAXIMUM_BRIGHTNESS # define RGB_DISABLE_WHEN_USB_SUSPENDED diff --git a/keyboards/bastardkb/tbkmini/info.json b/keyboards/bastardkb/tbkmini/info.json index 94c357cd3b..ec0433d387 100644 --- a/keyboards/bastardkb/tbkmini/info.json +++ b/keyboards/bastardkb/tbkmini/info.json @@ -3,6 +3,10 @@ "usb": { "pid": "0x1828" }, + "rgblight": { + "led_count": 42, + "split_count": [21, 21] + }, "community_layouts": ["split_3x6_3"], "layouts": { "LAYOUT_split_3x6_3": { diff --git a/keyboards/bbrfkr/dynamis/config.h b/keyboards/bbrfkr/dynamis/config.h index 4cad8086cd..ee41aaec4e 100644 --- a/keyboards/bbrfkr/dynamis/config.h +++ b/keyboards/bbrfkr/dynamis/config.h @@ -17,7 +17,6 @@ #pragma once /* rgb num */ -#define RGBLED_NUM 10 #define RGBLIGHT_EFFECT_BREATHING #define RGBLIGHT_EFFECT_RAINBOW_MOOD #define RGBLIGHT_EFFECT_RAINBOW_SWIRL diff --git a/keyboards/bbrfkr/dynamis/info.json b/keyboards/bbrfkr/dynamis/info.json index c9f403a045..b3f9c6d2aa 100644 --- a/keyboards/bbrfkr/dynamis/info.json +++ b/keyboards/bbrfkr/dynamis/info.json @@ -18,6 +18,9 @@ {"pin_a": "B7", "pin_b": "E6"} ] }, + "rgblight": { + "led_count": 10 + }, "ws2812": { "pin": "D3" }, diff --git a/keyboards/bemeier/bmek/config.h b/keyboards/bemeier/bmek/config.h index 6c147e6368..be8ac6c0fd 100755 --- a/keyboards/bemeier/bmek/config.h +++ b/keyboards/bemeier/bmek/config.h @@ -22,11 +22,3 @@ #define RGBLIGHT_EFFECT_BREATHING #define RGBLIGHT_EFFECT_RAINBOW_MOOD #define RGBLIGHT_MODE_STATIC_GRADIENT - -#define RGBLED_NUM 6 -#define RGBLIGHT_HUE_STEP 8 -#define RGBLIGHT_SAT_STEP 8 -#define RGBLIGHT_VAL_STEP 8 - -//#define RETRO_TAPPING -#define TAPPING_TERM 175 diff --git a/keyboards/bemeier/bmek/rev1/info.json b/keyboards/bemeier/bmek/rev1/info.json index c50cae166e..b3aa3b2382 100644 --- a/keyboards/bemeier/bmek/rev1/info.json +++ b/keyboards/bemeier/bmek/rev1/info.json @@ -2,6 +2,14 @@ "usb": { "device_version": "0.0.1" }, + "rgblight": { + "saturation_steps": 8, + "brightness_steps": 8, + "led_count": 6 + }, + "tapping": { + "term": 175 + }, "ws2812": { "pin": "E6" }, diff --git a/keyboards/bemeier/bmek/rev2/info.json b/keyboards/bemeier/bmek/rev2/info.json index 1ac54f5c79..34c3df6470 100644 --- a/keyboards/bemeier/bmek/rev2/info.json +++ b/keyboards/bemeier/bmek/rev2/info.json @@ -2,6 +2,14 @@ "usb": { "device_version": "0.0.2" }, + "rgblight": { + "saturation_steps": 8, + "brightness_steps": 8, + "led_count": 6 + }, + "tapping": { + "term": 175 + }, "ws2812": { "pin": "E6" }, diff --git a/keyboards/bemeier/bmek/rev3/info.json b/keyboards/bemeier/bmek/rev3/info.json index c951ca8e43..d2840af893 100644 --- a/keyboards/bemeier/bmek/rev3/info.json +++ b/keyboards/bemeier/bmek/rev3/info.json @@ -2,6 +2,14 @@ "usb": { "device_version": "0.0.3" }, + "rgblight": { + "saturation_steps": 8, + "brightness_steps": 8, + "led_count": 6 + }, + "tapping": { + "term": 175 + }, "ws2812": { "pin": "E6" }, diff --git a/keyboards/bfake/config.h b/keyboards/bfake/config.h index ddc21dae30..d849732a07 100644 --- a/keyboards/bfake/config.h +++ b/keyboards/bfake/config.h @@ -17,9 +17,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #pragma once - -#define RGBLED_NUM 16 - #define RGBLIGHT_EFFECT_BREATHING #define RGBLIGHT_EFFECT_RAINBOW_MOOD #define RGBLIGHT_EFFECT_RAINBOW_SWIRL diff --git a/keyboards/bfake/info.json b/keyboards/bfake/info.json index 374e337792..3f449b1ca2 100644 --- a/keyboards/bfake/info.json +++ b/keyboards/bfake/info.json @@ -16,6 +16,9 @@ "backlight": { "pin": "D4" }, + "rgblight": { + "led_count": 16 + }, "ws2812": { "driver": "i2c" }, diff --git a/keyboards/biacco42/ergo42/rev1/config.h b/keyboards/biacco42/ergo42/rev1/config.h index 8f990eb8ed..179b117243 100644 --- a/keyboards/biacco42/ergo42/rev1/config.h +++ b/keyboards/biacco42/ergo42/rev1/config.h @@ -24,9 +24,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. /* Locking resynchronize hack */ #define LOCKING_RESYNC_ENABLE -/* ws2812 RGB LED */ -#define RGBLED_NUM 12 // Number of LEDs - /* * Feature disable options * These options are also useful to firmware size reduction. diff --git a/keyboards/biacco42/ergo42/rev1/info.json b/keyboards/biacco42/ergo42/rev1/info.json index 96ecd7010e..67f27ad612 100644 --- a/keyboards/biacco42/ergo42/rev1/info.json +++ b/keyboards/biacco42/ergo42/rev1/info.json @@ -8,6 +8,9 @@ "pid": "0x0042", "device_version": "1.0.0" }, + "rgblight": { + "led_count": 12 + }, "ws2812": { "pin": "D3" }, diff --git a/keyboards/binepad/bnr1/v2/rules.mk b/keyboards/binepad/bnr1/v2/rules.mk index a9a826d49f..77b90d035d 100755..100644 --- a/keyboards/binepad/bnr1/v2/rules.mk +++ b/keyboards/binepad/bnr1/v2/rules.mk @@ -3,5 +3,3 @@ EEPROM_DRIVER = wear_leveling WEAR_LEVELING_DRIVER = embedded_flash -# Enter lower-power sleep mode when on the ChibiOS idle thread -OPT_DEFS += -DCORTEX_ENABLE_WFI_IDLE=TRUE diff --git a/keyboards/bioi/f60/config.h b/keyboards/bioi/f60/config.h index b06dcb251a..7635dba8d0 100644 --- a/keyboards/bioi/f60/config.h +++ b/keyboards/bioi/f60/config.h @@ -17,11 +17,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #pragma once -# define RGBLED_NUM 5 -# define RGBLIGHT_HUE_STEP 8 -# define RGBLIGHT_SAT_STEP 8 -# define RGBLIGHT_VAL_STEP 8 -# define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */ # define RGBLIGHT_EFFECT_BREATHING # define RGBLIGHT_EFFECT_RAINBOW_MOOD # define RGBLIGHT_EFFECT_RAINBOW_SWIRL diff --git a/keyboards/bioi/f60/info.json b/keyboards/bioi/f60/info.json index 5911813043..49227f787d 100644 --- a/keyboards/bioi/f60/info.json +++ b/keyboards/bioi/f60/info.json @@ -18,6 +18,12 @@ "levels": 8, "breathing": true }, + "rgblight": { + "saturation_steps": 8, + "brightness_steps": 8, + "led_count": 5, + "sleep": true + }, "ws2812": { "pin": "B1" }, diff --git a/keyboards/bioi/g60/config.h b/keyboards/bioi/g60/config.h index d1039d0896..273b316b82 100644 --- a/keyboards/bioi/g60/config.h +++ b/keyboards/bioi/g60/config.h @@ -28,10 +28,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #define RGBLIGHT_EFFECT_RGB_TEST #define RGBLIGHT_EFFECT_ALTERNATING #define RGBLIGHT_EFFECT_TWINKLE -#define RGBLED_NUM 8 // Number of LEDs -#define RGBLIGHT_HUE_STEP 8 -#define RGBLIGHT_SAT_STEP 8 -#define RGBLIGHT_VAL_STEP 8 /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ #define LOCKING_SUPPORT_ENABLE diff --git a/keyboards/bioi/g60/info.json b/keyboards/bioi/g60/info.json index 10a92de946..16341aff48 100644 --- a/keyboards/bioi/g60/info.json +++ b/keyboards/bioi/g60/info.json @@ -17,6 +17,11 @@ "pin": "B7", "levels": 12 }, + "rgblight": { + "saturation_steps": 8, + "brightness_steps": 8, + "led_count": 8 + }, "ws2812": { "pin": "B1" }, diff --git a/keyboards/bioi/g60ble/config.h b/keyboards/bioi/g60ble/config.h index 24ced1fc0a..667c0d8cc0 100644 --- a/keyboards/bioi/g60ble/config.h +++ b/keyboards/bioi/g60ble/config.h @@ -11,10 +11,6 @@ #define RGBLIGHT_EFFECT_RGB_TEST #define RGBLIGHT_EFFECT_ALTERNATING #define RGBLIGHT_EFFECT_TWINKLE -#define RGBLED_NUM 36 -#define RGBLIGHT_HUE_STEP 8 -#define RGBLIGHT_SAT_STEP 8 -#define RGBLIGHT_VAL_STEP 8 /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ #define LOCKING_SUPPORT_ENABLE diff --git a/keyboards/bioi/g60ble/info.json b/keyboards/bioi/g60ble/info.json index 2b835f7c48..69643ae60f 100644 --- a/keyboards/bioi/g60ble/info.json +++ b/keyboards/bioi/g60ble/info.json @@ -17,6 +17,11 @@ "pin": "B7", "levels": 8 }, + "rgblight": { + "saturation_steps": 8, + "brightness_steps": 8, + "led_count": 36 + }, "ws2812": { "pin": "B1" }, diff --git a/keyboards/bioi/morgan65/config.h b/keyboards/bioi/morgan65/config.h index 93ab008b66..f3d313eea0 100644 --- a/keyboards/bioi/morgan65/config.h +++ b/keyboards/bioi/morgan65/config.h @@ -28,10 +28,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #define RGBLIGHT_EFFECT_RGB_TEST #define RGBLIGHT_EFFECT_ALTERNATING #define RGBLIGHT_EFFECT_TWINKLE -#define RGBLED_NUM 8 // Number of LEDs -#define RGBLIGHT_HUE_STEP 8 -#define RGBLIGHT_SAT_STEP 8 -#define RGBLIGHT_VAL_STEP 8 /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ #define LOCKING_SUPPORT_ENABLE diff --git a/keyboards/bioi/morgan65/info.json b/keyboards/bioi/morgan65/info.json index c3fced4f78..db1c74474d 100644 --- a/keyboards/bioi/morgan65/info.json +++ b/keyboards/bioi/morgan65/info.json @@ -17,6 +17,11 @@ "pin": "B6", "levels": 12 }, + "rgblight": { + "saturation_steps": 8, + "brightness_steps": 8, + "led_count": 8 + }, "ws2812": { "pin": "B1" }, diff --git a/keyboards/bioi/s65/config.h b/keyboards/bioi/s65/config.h index 13f5533c9f..7e5ab6f854 100644 --- a/keyboards/bioi/s65/config.h +++ b/keyboards/bioi/s65/config.h @@ -28,10 +28,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #define RGBLIGHT_EFFECT_RGB_TEST #define RGBLIGHT_EFFECT_ALTERNATING #define RGBLIGHT_EFFECT_TWINKLE -#define RGBLED_NUM 8 -#define RGBLIGHT_HUE_STEP 8 -#define RGBLIGHT_SAT_STEP 8 -#define RGBLIGHT_VAL_STEP 8 /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ #define LOCKING_SUPPORT_ENABLE diff --git a/keyboards/bioi/s65/info.json b/keyboards/bioi/s65/info.json index a3a783b61f..46b07b90d1 100644 --- a/keyboards/bioi/s65/info.json +++ b/keyboards/bioi/s65/info.json @@ -17,6 +17,11 @@ "pin": "B6", "levels": 12 }, + "rgblight": { + "saturation_steps": 8, + "brightness_steps": 8, + "led_count": 8 + }, "ws2812": { "pin": "D3" }, diff --git a/keyboards/blackplum/config.h b/keyboards/blackplum/config.h index ec4300c811..ab095e7c1e 100644 --- a/keyboards/blackplum/config.h +++ b/keyboards/blackplum/config.h @@ -18,8 +18,3 @@ #define RGBLIGHT_EFFECT_RGB_TEST #define RGBLIGHT_EFFECT_ALTERNATING #define RGBLIGHT_EFFECT_TWINKLE -#define RGBLED_NUM 16 // Number of LEDs -#define RGBLIGHT_HUE_STEP 10 -#define RGBLIGHT_SAT_STEP 10 -#define RGBLIGHT_VAL_STEP 10 -#define RGBLIGHT_SLEEP diff --git a/keyboards/blackplum/info.json b/keyboards/blackplum/info.json index bc9786c09a..ead8b9a2fa 100644 --- a/keyboards/blackplum/info.json +++ b/keyboards/blackplum/info.json @@ -8,6 +8,13 @@ "pid": "0x4250", "device_version": "10.0.1" }, + "rgblight": { + "hue_steps": 10, + "saturation_steps": 10, + "brightness_steps": 10, + "led_count": 16, + "sleep": true + }, "ws2812": { "pin": "C7" }, diff --git a/keyboards/blockboy/ac980mini/config.h b/keyboards/blockboy/ac980mini/config.h index 57ba70ec11..b98cb7964f 100644 --- a/keyboards/blockboy/ac980mini/config.h +++ b/keyboards/blockboy/ac980mini/config.h @@ -6,7 +6,6 @@ // RGB configuration // The number of LEDs connected #define RGB_MATRIX_LED_COUNT 81 -# define RGBLED_NUM 81 #ifdef RGB_MATRIX_ENABLE //# define RGB_MATRIX_KEYPRESSES // reacts to keypresses @@ -16,10 +15,6 @@ // # define RGB_MATRIX_LED_PROCESS_LIMIT (RGB_MATRIX_LED_COUNT + 4) / 5 // limits the number of LEDs to process in an animation per task run (increases keyboard responsiveness) // # define RGB_MATRIX_LED_FLUSH_LIMIT 16 // limits in milliseconds how frequently an animation will update the LEDs. 16 (16ms) is equivalent to limiting to 60fps (increases keyboard responsiveness) # define RGB_MATRIX_MAXIMUM_BRIGHTNESS 150 // limits maximum brightness of LEDs to 150 out of 255. Higher may cause the controller to crash. -# define RGB_MATRIX_HUE_STEP 8 -# define RGB_MATRIX_SAT_STEP 8 -# define RGB_MATRIX_VAL_STEP 8 -# define RGB_MATRIX_SPD_STEP 10 /* Enable the animations you want/need. You may need to enable only a small number of these because * * they take up a lot of space. Enable and confirm that you can still successfully compile your firmware. */ diff --git a/keyboards/blockboy/ac980mini/info.json b/keyboards/blockboy/ac980mini/info.json index c754176824..1134d36aeb 100644 --- a/keyboards/blockboy/ac980mini/info.json +++ b/keyboards/blockboy/ac980mini/info.json @@ -19,7 +19,10 @@ "pin": "B7" }, "rgb_matrix": { - "driver": "WS2812" + "driver": "WS2812", + "sat_steps": 8, + "val_steps": 8, + "speed_steps": 10 }, "layouts": { "LAYOUT": { diff --git a/keyboards/blockey/config.h b/keyboards/blockey/config.h index 9b796dcece..a51c4956ae 100644 --- a/keyboards/blockey/config.h +++ b/keyboards/blockey/config.h @@ -17,10 +17,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #pragma once -#define RGBLED_NUM 4 -#define RGBLIGHT_HUE_STEP 10 -#define RGBLIGHT_SAT_STEP 17 - #define RGBLIGHT_EFFECT_BREATHING #define RGBLIGHT_EFFECT_RAINBOW_MOOD #define RGBLIGHT_EFFECT_RAINBOW_SWIRL diff --git a/keyboards/blockey/info.json b/keyboards/blockey/info.json index 044d1e9e1a..2c3f25cfec 100644 --- a/keyboards/blockey/info.json +++ b/keyboards/blockey/info.json @@ -8,6 +8,10 @@ "pid": "0x0000", "device_version": "0.0.1" }, + "rgblight": { + "hue_steps": 10, + "led_count": 4 + }, "ws2812": { "pin": "B1" }, diff --git a/keyboards/blockey/keymaps/eucalyn/keymap.c b/keyboards/blockey/keymaps/eucalyn/keymap.c index 3a6d1fecd1..20ab8ed117 100644 --- a/keyboards/blockey/keymaps/eucalyn/keymap.c +++ b/keyboards/blockey/keymaps/eucalyn/keymap.c @@ -37,19 +37,3 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { ), }; - -bool process_record_user(uint16_t keycode, keyrecord_t *record) { - return true; -} - -void matrix_init_user(void) { - -} - -void matrix_scan_user(void) { - -} - -void led_set_user(uint8_t usb_led) { - -} diff --git a/keyboards/bluebell/swoop/config.h b/keyboards/bluebell/swoop/config.h index c34ab85ecf..de12e03e36 100644 --- a/keyboards/bluebell/swoop/config.h +++ b/keyboards/bluebell/swoop/config.h @@ -28,11 +28,3 @@ #define RGBLIGHT_EFFECT_RAINBOW_MOOD #define RGBLIGHT_EFFECT_STATIC_GRADIENT #define RGBLIGHT_EFFECT_BREATHING - #define RGBLED_NUM 36 - #define RGBLED_SPLIT \ - { 18, 18 } - #define RGBLIGHT_SPLIT - #define RGBLIGHT_HUE_STEP 10 - #define RGBLIGHT_SAT_STEP 17 - #define RGBLIGHT_VAL_STEP 17 - #define RGBLIGHT_SLEEP diff --git a/keyboards/bluebell/swoop/info.json b/keyboards/bluebell/swoop/info.json index e319754f78..11d0d2bf8d 100644 --- a/keyboards/bluebell/swoop/info.json +++ b/keyboards/bluebell/swoop/info.json @@ -12,7 +12,11 @@ "pin": "D3" }, "rgblight": { - "max_brightness": 150 + "hue_steps": 10, + "led_count": 36, + "max_brightness": 150, + "sleep": true, + "split_count": [18, 18] }, "matrix_pins": { "cols": ["B1", "F7", "F6", "F5", "F4"], diff --git a/keyboards/boardrun/bizarre/config.h b/keyboards/boardrun/bizarre/config.h index a367b59dd3..2dd7e6b969 100644 --- a/keyboards/boardrun/bizarre/config.h +++ b/keyboards/boardrun/bizarre/config.h @@ -47,7 +47,3 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #define RGBLIGHT_EFFECT_RGB_TEST #define RGBLIGHT_EFFECT_ALTERNATING #define RGBLIGHT_EFFECT_TWINKLE -#define RGBLED_NUM 15 // number of LEDs -#define RGBLIGHT_HUE_STEP 12 // units to step when in/decreasing hue -#define RGBLIGHT_SAT_STEP 25 // units to step when in/decresing saturation -#define RGBLIGHT_VAL_STEP 12 // units to step when in/decreasing value (brightness) diff --git a/keyboards/boardrun/bizarre/info.json b/keyboards/boardrun/bizarre/info.json index 8c6253965b..6167941d35 100644 --- a/keyboards/boardrun/bizarre/info.json +++ b/keyboards/boardrun/bizarre/info.json @@ -9,6 +9,12 @@ "pid": "0x5339", "device_version": "0.0.1" }, + "rgblight": { + "hue_steps": 12, + "saturation_steps": 25, + "brightness_steps": 12, + "led_count": 15 + }, "ws2812": { "pin": "B7" }, diff --git a/keyboards/boardrun/classic/config.h b/keyboards/boardrun/classic/config.h index a1d1a3a544..2dd7e6b969 100644 --- a/keyboards/boardrun/classic/config.h +++ b/keyboards/boardrun/classic/config.h @@ -47,7 +47,3 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #define RGBLIGHT_EFFECT_RGB_TEST #define RGBLIGHT_EFFECT_ALTERNATING #define RGBLIGHT_EFFECT_TWINKLE -#define RGBLED_NUM 14 // number of LEDs -#define RGBLIGHT_HUE_STEP 12 // units to step when in/decreasing hue -#define RGBLIGHT_SAT_STEP 25 // units to step when in/decresing saturation -#define RGBLIGHT_VAL_STEP 12 // units to step when in/decreasing value (brightness) diff --git a/keyboards/boardrun/classic/info.json b/keyboards/boardrun/classic/info.json index 8259afcdcc..aeb670a30f 100644 --- a/keyboards/boardrun/classic/info.json +++ b/keyboards/boardrun/classic/info.json @@ -9,6 +9,12 @@ "pid": "0x5338", "device_version": "0.0.1" }, + "rgblight": { + "hue_steps": 12, + "saturation_steps": 25, + "brightness_steps": 12, + "led_count": 14 + }, "ws2812": { "pin": "B7" }, diff --git a/keyboards/boardwalk/config.h b/keyboards/boardwalk/config.h index a1d1a3a544..2dd7e6b969 100644 --- a/keyboards/boardwalk/config.h +++ b/keyboards/boardwalk/config.h @@ -47,7 +47,3 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #define RGBLIGHT_EFFECT_RGB_TEST #define RGBLIGHT_EFFECT_ALTERNATING #define RGBLIGHT_EFFECT_TWINKLE -#define RGBLED_NUM 14 // number of LEDs -#define RGBLIGHT_HUE_STEP 12 // units to step when in/decreasing hue -#define RGBLIGHT_SAT_STEP 25 // units to step when in/decresing saturation -#define RGBLIGHT_VAL_STEP 12 // units to step when in/decreasing value (brightness) diff --git a/keyboards/boardwalk/info.json b/keyboards/boardwalk/info.json index 8a04fc121e..c6d76eb6a4 100644 --- a/keyboards/boardwalk/info.json +++ b/keyboards/boardwalk/info.json @@ -8,6 +8,12 @@ "pid": "0x5337", "device_version": "0.0.1" }, + "rgblight": { + "hue_steps": 12, + "saturation_steps": 25, + "brightness_steps": 12, + "led_count": 14 + }, "ws2812": { "pin": "B7" }, diff --git a/keyboards/bolsa/bolsalice/config.h b/keyboards/bolsa/bolsalice/config.h index ad199d6578..d0d4d47e7d 100644 --- a/keyboards/bolsa/bolsalice/config.h +++ b/keyboards/bolsa/bolsalice/config.h @@ -16,12 +16,6 @@ #pragma once - #define RGBLED_NUM 8 - #define RGBLIGHT_HUE_STEP 8 - #define RGBLIGHT_SAT_STEP 8 - #define RGBLIGHT_VAL_STEP 8 - #define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */ - #define RGBLIGHT_EFFECT_BREATHING #define RGBLIGHT_EFFECT_RAINBOW_MOOD #define RGBLIGHT_EFFECT_RAINBOW_SWIRL diff --git a/keyboards/bolsa/bolsalice/info.json b/keyboards/bolsa/bolsalice/info.json index 25ef2f617b..a4313c4633 100644 --- a/keyboards/bolsa/bolsalice/info.json +++ b/keyboards/bolsa/bolsalice/info.json @@ -6,6 +6,12 @@ "vid": "0x4253", "device_version": "0.0.1" }, + "rgblight": { + "saturation_steps": 8, + "brightness_steps": 8, + "led_count": 8, + "sleep": true + }, "ws2812": { "pin": "B1" }, diff --git a/keyboards/boston/config.h b/keyboards/boston/config.h index 1dcbcdb5b8..e4d02ffcb8 100644 --- a/keyboards/boston/config.h +++ b/keyboards/boston/config.h @@ -26,7 +26,6 @@ #define LOCKING_RESYNC_ENABLE /* Define RGBLED */ -#define RGBLED_NUM 1 #define RGBLIGHT_EFFECT_BREATHING #define RGBLIGHT_EFFECT_RAINBOW_MOOD #define RGBLIGHT_EFFECT_RAINBOW_SWIRL @@ -42,8 +41,6 @@ //The 3D-printed version of Boston uses APA106 LEDs, which are reversed #define WS2812_BYTE_ORDER WS2812_BYTE_ORDER_RGB -#define TAP_CODE_DELAY 15 - /* * Feature disable options * These options are also useful to firmware size reduction. diff --git a/keyboards/boston/info.json b/keyboards/boston/info.json index 76d6cb41ab..f6539ef658 100644 --- a/keyboards/boston/info.json +++ b/keyboards/boston/info.json @@ -18,11 +18,17 @@ {"pin_a": "C13", "pin_b": "F1", "resolution": 2} ] }, + "qmk": { + "tap_keycode_delay": 15 + }, "backlight": { "pin": "A6", "levels": 6, "breathing": true }, + "rgblight": { + "led_count": 1 + }, "ws2812": { "pin": "A5" }, diff --git a/keyboards/boston/rules.mk b/keyboards/boston/rules.mk index 176d6b7982..80d17a2dfd 100644 --- a/keyboards/boston/rules.mk +++ b/keyboards/boston/rules.mk @@ -12,5 +12,3 @@ RGBLIGHT_ENABLE = yes # Enable keyboard RGB underglow AUDIO_ENABLE = no # Audio output ENCODER_ENABLE = yes -# Enter lower-power sleep mode when on the ChibiOS idle thread -OPT_DEFS += -DCORTEX_ENABLE_WFI_IDLE=TRUE diff --git a/keyboards/boston_meetup/2019/config.h b/keyboards/boston_meetup/2019/config.h index d609409cb5..4ed063f738 100644 --- a/keyboards/boston_meetup/2019/config.h +++ b/keyboards/boston_meetup/2019/config.h @@ -96,8 +96,7 @@ #define RGBLIGHT_EFFECT_ALTERNATING #define RGBLIGHT_EFFECT_TWINKLE -#define RGBLED_NUM 10 -#define RGB_MATRIX_LED_COUNT RGBLED_NUM +#define RGB_MATRIX_LED_COUNT 10 #define RGB_MATRIX_KEYPRESSES diff --git a/keyboards/boston_meetup/2019/info.json b/keyboards/boston_meetup/2019/info.json index d50e92e17c..5260ffabe1 100644 --- a/keyboards/boston_meetup/2019/info.json +++ b/keyboards/boston_meetup/2019/info.json @@ -15,6 +15,9 @@ {"pin_a": "B13", "pin_b": "B14"} ] }, + "rgblight": { + "led_count": 10 + }, "ws2812": { "pin": "B5" }, diff --git a/keyboards/box75/rules.mk b/keyboards/box75/rules.mk index 93f25a13d8..5b6b0c9299 100644 --- a/keyboards/box75/rules.mk +++ b/keyboards/box75/rules.mk @@ -12,5 +12,3 @@ RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow AUDIO_ENABLE = no # Audio output ENCODER_ENABLE = no -# Enter lower-power sleep mode when on the ChibiOS idle thread -OPT_DEFS += -DCORTEX_ENABLE_WFI_IDLE=TRUE diff --git a/keyboards/bpiphany/four_banger/config.h b/keyboards/bpiphany/four_banger/config.h index 2dae864ddb..d702489ee7 100644 --- a/keyboards/bpiphany/four_banger/config.h +++ b/keyboards/bpiphany/four_banger/config.h @@ -16,7 +16,3 @@ #define RGBLIGHT_EFFECT_RGB_TEST #define RGBLIGHT_EFFECT_ALTERNATING #define RGBLIGHT_EFFECT_TWINKLE -#define RGBLED_NUM 1 -#define RGBLIGHT_HUE_STEP 8 -#define RGBLIGHT_SAT_STEP 8 -#define RGBLIGHT_VAL_STEP 8 diff --git a/keyboards/bpiphany/four_banger/info.json b/keyboards/bpiphany/four_banger/info.json index ce9b4a7ec5..73527bc970 100644 --- a/keyboards/bpiphany/four_banger/info.json +++ b/keyboards/bpiphany/four_banger/info.json @@ -8,6 +8,11 @@ "pid": "0x2004", "device_version": "0.0.1" }, + "rgblight": { + "saturation_steps": 8, + "brightness_steps": 8, + "led_count": 1 + }, "ws2812": { "pin": "E6" }, diff --git a/keyboards/bpiphany/hid_liber/config.h b/keyboards/bpiphany/hid_liber/config.h index f567c3e12a..2e41e1f700 100755 --- a/keyboards/bpiphany/hid_liber/config.h +++ b/keyboards/bpiphany/hid_liber/config.h @@ -23,7 +23,6 @@ #define MATRIX_COLS 8 // HID Liberation Device uses custom matrix code to accomodate a 74HC238 3 to 8 decoder on pins B1, B2 and B3. -//#define DIODE_DIRECTION /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ #define LOCKING_SUPPORT_ENABLE diff --git a/keyboards/bpiphany/kitten_paw/keymaps/ickerwx/keymap.c b/keyboards/bpiphany/kitten_paw/keymaps/ickerwx/keymap.c index c0439912ff..f0c75284f7 100644 --- a/keyboards/bpiphany/kitten_paw/keymaps/ickerwx/keymap.c +++ b/keyboards/bpiphany/kitten_paw/keymaps/ickerwx/keymap.c @@ -3,8 +3,6 @@ #define MEDAPP LT(MEDIA, KC_APP) -uint8_t current_layer_global = 255; - enum layers { DEFAULT, PROG1, @@ -87,25 +85,6 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { _______,_______,_______, LT(MISC, KC_SPC), _______,_______,_______,_______, _______,_______,_______, _______,_______), }; -void matrix_scan_user(void) { - uint8_t layer; - layer = get_highest_layer(layer_state); - - if (current_layer_global != layer) { - current_layer_global = layer; - - // unset CAPSLOCK and SCROLL LOCK LEDs - led_set(host_keyboard_leds() & ~(1<<USB_LED_CAPS_LOCK)); - led_set(host_keyboard_leds() & ~(1<<USB_LED_SCROLL_LOCK)); - // set SCROLL LOCK LED when the mouse layer is active, CAPS LOCK when PROG layer is active - if (layer == MOUSE1 || layer == MOUSE2) { - led_set(host_keyboard_leds() | (1<<USB_LED_SCROLL_LOCK)); - } else if (layer == PROG1 || layer == PROG2) { - led_set(host_keyboard_leds() | (1<<USB_LED_CAPS_LOCK)); - } - } -} - void tap_helper(keyrecord_t *record, uint16_t orig_mod, uint16_t macro_mod, uint16_t macro_kc ) { if (record->event.pressed) { if (record->tap.count > 0 && !record->tap.interrupted) { diff --git a/keyboards/bt66tech/bt66tech60/config.h b/keyboards/bt66tech/bt66tech60/config.h index 687baec509..4c46487b4f 100644 --- a/keyboards/bt66tech/bt66tech60/config.h +++ b/keyboards/bt66tech/bt66tech60/config.h @@ -35,7 +35,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #define RGBLIGHT_EFFECT_RGB_TEST #define RGBLIGHT_EFFECT_ALTERNATING #define RGBLIGHT_EFFECT_TWINKLE -#define RGBLED_NUM 9 #define WS2812_SPI SPID2 #define WS2812_SPI_MOSI_PAL_MODE 5 /* diff --git a/keyboards/bt66tech/bt66tech60/info.json b/keyboards/bt66tech/bt66tech60/info.json index e4a2d5b1d6..5c5ca57a1a 100644 --- a/keyboards/bt66tech/bt66tech60/info.json +++ b/keyboards/bt66tech/bt66tech60/info.json @@ -19,6 +19,9 @@ "levels": 6, "breathing": true }, + "rgblight": { + "led_count": 9 + }, "ws2812": { "pin": "B15", "driver": "spi" diff --git a/keyboards/bt66tech/bt66tech60/rules.mk b/keyboards/bt66tech/bt66tech60/rules.mk index bfd3bcd1b4..0f238804a1 100644 --- a/keyboards/bt66tech/bt66tech60/rules.mk +++ b/keyboards/bt66tech/bt66tech60/rules.mk @@ -14,5 +14,3 @@ SLEEP_LED_ENABLE = yes DEFAULT_FOLDER = bt66tech/bt66tech60 -# Enter lower-power sleep mode when on the ChibiOS idle thread -OPT_DEFS += -DCORTEX_ENABLE_WFI_IDLE=TRUE diff --git a/keyboards/bubble75/hotswap/config.h b/keyboards/bubble75/hotswap/config.h index df83257ebd..7ecadd0076 100644 --- a/keyboards/bubble75/hotswap/config.h +++ b/keyboards/bubble75/hotswap/config.h @@ -24,11 +24,7 @@ /* WS2812 RGB */ #ifdef RGB_MATRIX_ENABLE -#define RGBLED_NUM 81 #define RGB_MATRIX_LED_COUNT 81 -#define RGBLIGHT_HUE_STEP 8 -#define RGBLIGHT_SAT_STEP 8 -#define RGBLIGHT_VAL_STEP 8 #define RGBLIGHT_LAYERS //#define RGBLIGHT_LAYER_BLINK #define RGBLIGHT_LAYERS_OVERRIDE_RGB_OFF diff --git a/keyboards/buildakb/potato65/config.h b/keyboards/buildakb/potato65/config.h index 17e3e9a481..6f793b279f 100644 --- a/keyboards/buildakb/potato65/config.h +++ b/keyboards/buildakb/potato65/config.h @@ -48,8 +48,3 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #define RGBLIGHT_EFFECT_RGB_TEST #define RGBLIGHT_EFFECT_ALTERNATING #define RGBLIGHT_EFFECT_TWINKLE -#define RGBLED_NUM 14 -#define RGBLIGHT_HUE_STEP 8 -#define RGBLIGHT_SAT_STEP 8 -#define RGBLIGHT_VAL_STEP 8 -#define RGBLIGHT_SLEEP diff --git a/keyboards/buildakb/potato65/info.json b/keyboards/buildakb/potato65/info.json index effaf6cbca..94610fb6ce 100644 --- a/keyboards/buildakb/potato65/info.json +++ b/keyboards/buildakb/potato65/info.json @@ -12,7 +12,11 @@ "pin": "B1" }, "rgblight": { - "max_brightness": 240 + "saturation_steps": 8, + "brightness_steps": 8, + "led_count": 14, + "max_brightness": 240, + "sleep": true }, "matrix_pins": { "cols": ["F6", "B0", "F1", "C7", "C6", "B6", "B5", "B4", "D7", "D6", "D4", "D5", "D3", "D2", "D1", "D0"], diff --git a/keyboards/buildakb/potato65hs/config.h b/keyboards/buildakb/potato65hs/config.h index d0bdbb2258..dcd77424dc 100644 --- a/keyboards/buildakb/potato65hs/config.h +++ b/keyboards/buildakb/potato65hs/config.h @@ -33,8 +33,3 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #define RGBLIGHT_EFFECT_RGB_TEST #define RGBLIGHT_EFFECT_ALTERNATING #define RGBLIGHT_EFFECT_TWINKLE -# define RGBLED_NUM 16 -# define RGBLIGHT_HUE_STEP 8 -# define RGBLIGHT_SAT_STEP 8 -# define RGBLIGHT_VAL_STEP 8 -# define RGBLIGHT_SLEEP diff --git a/keyboards/buildakb/potato65hs/info.json b/keyboards/buildakb/potato65hs/info.json index fa3b5d2bfe..bbcfef953f 100644 --- a/keyboards/buildakb/potato65hs/info.json +++ b/keyboards/buildakb/potato65hs/info.json @@ -12,7 +12,11 @@ "pin": "D5" }, "rgblight": { - "max_brightness": 240 + "saturation_steps": 8, + "brightness_steps": 8, + "led_count": 16, + "max_brightness": 240, + "sleep": true }, "matrix_pins": { "cols": ["D3", "D4", "D6", "D7", "B4", "B5", "B6", "F1", "B0", "B1", "B2", "B3", "B7", "D0", "D1"], diff --git a/keyboards/buildakb/potato65s/config.h b/keyboards/buildakb/potato65s/config.h index 3b512642a2..6da15830a2 100644 --- a/keyboards/buildakb/potato65s/config.h +++ b/keyboards/buildakb/potato65s/config.h @@ -33,8 +33,3 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. # define RGBLIGHT_EFFECT_RGB_TEST # define RGBLIGHT_EFFECT_ALTERNATING # define RGBLIGHT_EFFECT_TWINKLE -# define RGBLED_NUM 16 -# define RGBLIGHT_HUE_STEP 8 -# define RGBLIGHT_SAT_STEP 8 -# define RGBLIGHT_VAL_STEP 8 -# define RGBLIGHT_SLEEP diff --git a/keyboards/buildakb/potato65s/info.json b/keyboards/buildakb/potato65s/info.json index d4efe4aac6..c1893ffb3c 100644 --- a/keyboards/buildakb/potato65s/info.json +++ b/keyboards/buildakb/potato65s/info.json @@ -12,7 +12,11 @@ "pin": "D5" }, "rgblight": { - "max_brightness": 240 + "saturation_steps": 8, + "brightness_steps": 8, + "led_count": 16, + "max_brightness": 240, + "sleep": true }, "matrix_pins": { "cols": ["D3", "D4", "D6", "D7", "B4", "B5", "B6", "F1", "B0", "B1", "B2", "B3", "B7", "D0", "D1"], diff --git a/keyboards/cablecardesigns/cypher/rev6/config.h b/keyboards/cablecardesigns/cypher/rev6/config.h index 5a697f8805..21e08eecc9 100644 --- a/keyboards/cablecardesigns/cypher/rev6/config.h +++ b/keyboards/cablecardesigns/cypher/rev6/config.h @@ -7,11 +7,6 @@ /* Locking resynchronize hack */ #define LOCKING_RESYNC_ENABLE - #define RGBLED_NUM 3 - #define RGBLIGHT_HUE_STEP 12 - #define RGBLIGHT_SAT_STEP 25 - #define RGBLIGHT_VAL_STEP 12 - #define RGBLIGHT_SLEEP #define RGBLIGHT_EFFECT_BREATHING #define RGBLIGHT_EFFECT_RAINBOW_MOOD #define RGBLIGHT_EFFECT_RAINBOW_SWIRL diff --git a/keyboards/cablecardesigns/cypher/rev6/info.json b/keyboards/cablecardesigns/cypher/rev6/info.json index 5974c492a1..9722db7a63 100644 --- a/keyboards/cablecardesigns/cypher/rev6/info.json +++ b/keyboards/cablecardesigns/cypher/rev6/info.json @@ -18,6 +18,13 @@ "levels": 5, "breathing": true }, + "rgblight": { + "hue_steps": 12, + "saturation_steps": 25, + "brightness_steps": 12, + "led_count": 3, + "sleep": true + }, "ws2812": { "pin": "D5" }, diff --git a/keyboards/cablecardesigns/phoenix/rules.mk b/keyboards/cablecardesigns/phoenix/rules.mk index 7ce6edcba9..6dd24d8e06 100755..100644 --- a/keyboards/cablecardesigns/phoenix/rules.mk +++ b/keyboards/cablecardesigns/phoenix/rules.mk @@ -1,7 +1,3 @@ # Wildcard to allow APM32 MCU DFU_SUFFIX_ARGS = -v FFFF -p FFFF -# Do not put the microcontroller into power saving mode -# when we get USB suspend event. We want it to keep updating -# backlight effects. -OPT_DEFS += -DCORTEX_ENABLE_WFI_IDLE=TRUE diff --git a/keyboards/canary/canary60rgb/info.json b/keyboards/canary/canary60rgb/info.json index 1d3b2d693b..fada3f56f0 100644 --- a/keyboards/canary/canary60rgb/info.json +++ b/keyboards/canary/canary60rgb/info.json @@ -8,6 +8,12 @@ "pid": "0x0621", "device_version": "0.0.1" }, + "rgblight": { + "saturation_steps": 8, + "brightness_steps": 8, + "led_count": 20, + "sleep": true + }, "ws2812": { "pin": "B6" }, diff --git a/keyboards/canary/canary60rgb/v1/config.h b/keyboards/canary/canary60rgb/v1/config.h index c269ae5172..955021ccd8 100644 --- a/keyboards/canary/canary60rgb/v1/config.h +++ b/keyboards/canary/canary60rgb/v1/config.h @@ -25,11 +25,6 @@ # define RGBLIGHT_EFFECT_RGB_TEST # define RGBLIGHT_EFFECT_ALTERNATING # define RGBLIGHT_EFFECT_TWINKLE -# define RGBLED_NUM 20 -# define RGBLIGHT_HUE_STEP 8 -# define RGBLIGHT_SAT_STEP 8 -# define RGBLIGHT_VAL_STEP 8 -# define RGBLIGHT_SLEEP #ifdef RGB_MATRIX_ENABLE # define RGB_DISABLE_WHEN_USB_SUSPENDED // turn off effects when suspended diff --git a/keyboards/cannonkeys/adelie/config.h b/keyboards/cannonkeys/adelie/config.h index 4333289e82..9435a66e79 100644 --- a/keyboards/cannonkeys/adelie/config.h +++ b/keyboards/cannonkeys/adelie/config.h @@ -17,11 +17,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #pragma once - #define RGBLED_NUM 3 - #define RGBLIGHT_HUE_STEP 8 - #define RGBLIGHT_SAT_STEP 8 - #define RGBLIGHT_VAL_STEP 8 - #define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */ # define RGBLIGHT_EFFECT_BREATHING # define RGBLIGHT_EFFECT_RAINBOW_MOOD # define RGBLIGHT_EFFECT_RAINBOW_SWIRL diff --git a/keyboards/cannonkeys/adelie/info.json b/keyboards/cannonkeys/adelie/info.json index 717bf3f3f8..8f2a0f71be 100644 --- a/keyboards/cannonkeys/adelie/info.json +++ b/keyboards/cannonkeys/adelie/info.json @@ -8,6 +8,12 @@ "pid": "0x0005", "device_version": "0.0.1" }, + "rgblight": { + "saturation_steps": 8, + "brightness_steps": 8, + "led_count": 3, + "sleep": true + }, "ws2812": { "pin": "F0" }, diff --git a/keyboards/cannonkeys/aella/rules.mk b/keyboards/cannonkeys/aella/rules.mk index f56120695a..480e866179 100644 --- a/keyboards/cannonkeys/aella/rules.mk +++ b/keyboards/cannonkeys/aella/rules.mk @@ -14,5 +14,3 @@ BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow AUDIO_ENABLE = no # Audio output -# Enter lower-power sleep mode when on the ChibiOS idle thread -OPT_DEFS += -DCORTEX_ENABLE_WFI_IDLE=TRUE diff --git a/keyboards/cannonkeys/an_c/config.h b/keyboards/cannonkeys/an_c/config.h index aced1f333c..e84ffc5e99 100644 --- a/keyboards/cannonkeys/an_c/config.h +++ b/keyboards/cannonkeys/an_c/config.h @@ -36,7 +36,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #define RGBLIGHT_EFFECT_RGB_TEST #define RGBLIGHT_EFFECT_ALTERNATING #define RGBLIGHT_EFFECT_TWINKLE -#define RGBLED_NUM 14 #define WS2812_SPI SPID2 #define WS2812_SPI_MOSI_PAL_MODE 0 #define WS2812_SPI_SCK_PAL_MODE 0 diff --git a/keyboards/cannonkeys/an_c/info.json b/keyboards/cannonkeys/an_c/info.json index d3b73e3109..370fb9caf4 100644 --- a/keyboards/cannonkeys/an_c/info.json +++ b/keyboards/cannonkeys/an_c/info.json @@ -18,6 +18,9 @@ "levels": 6, "breathing": true }, + "rgblight": { + "led_count": 14 + }, "ws2812": { "pin": "B15", "driver": "spi" diff --git a/keyboards/cannonkeys/an_c/rules.mk b/keyboards/cannonkeys/an_c/rules.mk index b7ab91a339..8d3de1b8b2 100644 --- a/keyboards/cannonkeys/an_c/rules.mk +++ b/keyboards/cannonkeys/an_c/rules.mk @@ -13,5 +13,3 @@ NKRO_ENABLE = yes # Enable N-Key Rollover BACKLIGHT_ENABLE = yes RGBLIGHT_ENABLE = yes -# Enter lower-power sleep mode when on the ChibiOS idle thread -OPT_DEFS += -DCORTEX_ENABLE_WFI_IDLE=TRUE diff --git a/keyboards/cannonkeys/atlas/config.h b/keyboards/cannonkeys/atlas/config.h index 1296ad8dcc..b5bcb93ba7 100644 --- a/keyboards/cannonkeys/atlas/config.h +++ b/keyboards/cannonkeys/atlas/config.h @@ -35,7 +35,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #define WS2812_SPI SPID2 -#define RGBLED_NUM 22 #define WS2812_SPI_MOSI_PAL_MODE 0 #define WS2812_SPI_SCK_PAL_MODE 0 #define WS2812_SPI_SCK_PIN B13 diff --git a/keyboards/cannonkeys/atlas/info.json b/keyboards/cannonkeys/atlas/info.json index 6fc7724b2b..873c1c0c4d 100644 --- a/keyboards/cannonkeys/atlas/info.json +++ b/keyboards/cannonkeys/atlas/info.json @@ -8,6 +8,9 @@ "pid": "0xA7A5", "device_version": "0.0.1" }, + "rgblight": { + "led_count": 22 + }, "ws2812": { "pin": "B15", "driver": "spi" diff --git a/keyboards/cannonkeys/atlas_alps/config.h b/keyboards/cannonkeys/atlas_alps/config.h index 7e6ce9cdb9..1129e4261b 100644 --- a/keyboards/cannonkeys/atlas_alps/config.h +++ b/keyboards/cannonkeys/atlas_alps/config.h @@ -34,7 +34,3 @@ #define RGBLIGHT_EFFECT_RGB_TEST #define RGBLIGHT_EFFECT_ALTERNATING #define RGBLIGHT_EFFECT_TWINKLE -#define RGBLED_NUM 36 -#define RGBLIGHT_HUE_STEP 12 -#define RGBLIGHT_SAT_STEP 12 -#define RGBLIGHT_VAL_STEP 12 diff --git a/keyboards/cannonkeys/atlas_alps/info.json b/keyboards/cannonkeys/atlas_alps/info.json index ee584b24d2..c3e03db701 100644 --- a/keyboards/cannonkeys/atlas_alps/info.json +++ b/keyboards/cannonkeys/atlas_alps/info.json @@ -12,6 +12,10 @@ "pin": "D4" }, "rgblight": { + "hue_steps": 12, + "saturation_steps": 12, + "brightness_steps": 12, + "led_count": 36, "max_brightness": 230 }, "matrix_pins": { diff --git a/keyboards/cannonkeys/bakeneko60_iso_hs/rules.mk b/keyboards/cannonkeys/bakeneko60_iso_hs/rules.mk index 2a5031cd32..6dd24d8e06 100644 --- a/keyboards/cannonkeys/bakeneko60_iso_hs/rules.mk +++ b/keyboards/cannonkeys/bakeneko60_iso_hs/rules.mk @@ -1,5 +1,3 @@ # Wildcard to allow APM32 MCU DFU_SUFFIX_ARGS = -v FFFF -p FFFF -# Enter lower-power sleep mode when on the ChibiOS idle thread -OPT_DEFS += -DCORTEX_ENABLE_WFI_IDLE=TRUE diff --git a/keyboards/cannonkeys/bakeneko65_iso_hs/rules.mk b/keyboards/cannonkeys/bakeneko65_iso_hs/rules.mk index 2a5031cd32..6dd24d8e06 100644 --- a/keyboards/cannonkeys/bakeneko65_iso_hs/rules.mk +++ b/keyboards/cannonkeys/bakeneko65_iso_hs/rules.mk @@ -1,5 +1,3 @@ # Wildcard to allow APM32 MCU DFU_SUFFIX_ARGS = -v FFFF -p FFFF -# Enter lower-power sleep mode when on the ChibiOS idle thread -OPT_DEFS += -DCORTEX_ENABLE_WFI_IDLE=TRUE diff --git a/keyboards/cannonkeys/balance/config.h b/keyboards/cannonkeys/balance/config.h index f9c629dad8..0f2582901b 100644 --- a/keyboards/cannonkeys/balance/config.h +++ b/keyboards/cannonkeys/balance/config.h @@ -22,8 +22,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. /* Locking resynchronize hack */ #define LOCKING_RESYNC_ENABLE -#define TAP_CODE_DELAY 25 - #define DYNAMIC_KEYMAP_LAYER_COUNT 3 /* diff --git a/keyboards/cannonkeys/balance/info.json b/keyboards/cannonkeys/balance/info.json index 8be2cee0c5..9565795169 100644 --- a/keyboards/cannonkeys/balance/info.json +++ b/keyboards/cannonkeys/balance/info.json @@ -18,6 +18,9 @@ {"pin_a": "B5", "pin_b": "B6", "resolution": 2} ] }, + "qmk": { + "tap_keycode_delay": 25 + }, "indicators": { "caps_lock": "B12", "num_lock": "B14", diff --git a/keyboards/cannonkeys/balance/rules.mk b/keyboards/cannonkeys/balance/rules.mk index aa1b707d43..5afdd3772f 100644 --- a/keyboards/cannonkeys/balance/rules.mk +++ b/keyboards/cannonkeys/balance/rules.mk @@ -15,5 +15,3 @@ RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow AUDIO_ENABLE = no # Audio output ENCODER_ENABLE = yes -# Enter lower-power sleep mode when on the ChibiOS idle thread -OPT_DEFS += -DCORTEX_ENABLE_WFI_IDLE=TRUE diff --git a/keyboards/cannonkeys/brutalv2_65/rules.mk b/keyboards/cannonkeys/brutalv2_65/rules.mk index f56120695a..480e866179 100644 --- a/keyboards/cannonkeys/brutalv2_65/rules.mk +++ b/keyboards/cannonkeys/brutalv2_65/rules.mk @@ -14,5 +14,3 @@ BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow AUDIO_ENABLE = no # Audio output -# Enter lower-power sleep mode when on the ChibiOS idle thread -OPT_DEFS += -DCORTEX_ENABLE_WFI_IDLE=TRUE diff --git a/keyboards/cannonkeys/chimera65/rules.mk b/keyboards/cannonkeys/chimera65/rules.mk index 09c801a849..9bdf6b8093 100644 --- a/keyboards/cannonkeys/chimera65/rules.mk +++ b/keyboards/cannonkeys/chimera65/rules.mk @@ -11,5 +11,3 @@ BACKLIGHT_ENABLE = yes RGBLIGHT_ENABLE = no -# Enter lower-power sleep mode when on the ChibiOS idle thread -OPT_DEFS += -DCORTEX_ENABLE_WFI_IDLE=TRUE diff --git a/keyboards/cannonkeys/chimera65_hs/rules.mk b/keyboards/cannonkeys/chimera65_hs/rules.mk index 2a5031cd32..6dd24d8e06 100644 --- a/keyboards/cannonkeys/chimera65_hs/rules.mk +++ b/keyboards/cannonkeys/chimera65_hs/rules.mk @@ -1,5 +1,3 @@ # Wildcard to allow APM32 MCU DFU_SUFFIX_ARGS = -v FFFF -p FFFF -# Enter lower-power sleep mode when on the ChibiOS idle thread -OPT_DEFS += -DCORTEX_ENABLE_WFI_IDLE=TRUE diff --git a/keyboards/cannonkeys/cloudline/config.h b/keyboards/cannonkeys/cloudline/config.h index a3fc30fc3d..62e3dd37aa 100644 --- a/keyboards/cannonkeys/cloudline/config.h +++ b/keyboards/cannonkeys/cloudline/config.h @@ -12,7 +12,6 @@ /* Locking resynchronize hack */ #define LOCKING_RESYNC_ENABLE -#define RGBLED_NUM 20 #define WS2812_SPI SPID2 #define WS2812_SPI_MOSI_PAL_MODE 0 #define WS2812_SPI_SCK_PAL_MODE 0 diff --git a/keyboards/cannonkeys/cloudline/info.json b/keyboards/cannonkeys/cloudline/info.json index 37fc5470f9..a84a6f6a06 100644 --- a/keyboards/cannonkeys/cloudline/info.json +++ b/keyboards/cannonkeys/cloudline/info.json @@ -8,6 +8,9 @@ "pid": "0x000A", "device_version": "0.0.1" }, + "rgblight": { + "led_count": 20 + }, "ws2812": { "pin": "B15", "driver": "spi" diff --git a/keyboards/cannonkeys/cloudline/rules.mk b/keyboards/cannonkeys/cloudline/rules.mk index 42e73a4650..86794ca0f7 100644 --- a/keyboards/cannonkeys/cloudline/rules.mk +++ b/keyboards/cannonkeys/cloudline/rules.mk @@ -14,5 +14,3 @@ BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality RGBLIGHT_ENABLE = yes # Enable keyboard RGB underglow AUDIO_ENABLE = no # Audio output -# Enter lower-power sleep mode when on the ChibiOS idle thread -OPT_DEFS += -DCORTEX_ENABLE_WFI_IDLE=TRUE diff --git a/keyboards/cannonkeys/crin/rules.mk b/keyboards/cannonkeys/crin/rules.mk index e58c511435..a5906b6a90 100644 --- a/keyboards/cannonkeys/crin/rules.mk +++ b/keyboards/cannonkeys/crin/rules.mk @@ -14,5 +14,3 @@ BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow AUDIO_ENABLE = no # Audio output -# Enter lower-power sleep mode when on the ChibiOS idle thread -OPT_DEFS += -DCORTEX_ENABLE_WFI_IDLE=TRUE diff --git a/keyboards/cannonkeys/db60/config.h b/keyboards/cannonkeys/db60/config.h index 20f73d95a2..e84ffc5e99 100644 --- a/keyboards/cannonkeys/db60/config.h +++ b/keyboards/cannonkeys/db60/config.h @@ -37,7 +37,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #define RGBLIGHT_EFFECT_ALTERNATING #define RGBLIGHT_EFFECT_TWINKLE #define WS2812_SPI SPID2 -#define RGBLED_NUM 20 #define WS2812_SPI_MOSI_PAL_MODE 0 #define WS2812_SPI_SCK_PAL_MODE 0 #define WS2812_SPI_SCK_PIN B13 diff --git a/keyboards/cannonkeys/db60/info.json b/keyboards/cannonkeys/db60/info.json index 99a4425752..4c653de1be 100644 --- a/keyboards/cannonkeys/db60/info.json +++ b/keyboards/cannonkeys/db60/info.json @@ -16,6 +16,9 @@ "levels": 6, "breathing": true }, + "rgblight": { + "led_count": 20 + }, "ws2812": { "pin": "B15", "driver": "spi" diff --git a/keyboards/cannonkeys/db60/rules.mk b/keyboards/cannonkeys/db60/rules.mk index 9a57c69c7e..023b329ad2 100644 --- a/keyboards/cannonkeys/db60/rules.mk +++ b/keyboards/cannonkeys/db60/rules.mk @@ -15,5 +15,3 @@ RGBLIGHT_ENABLE = yes DEFAULT_FOLDER = cannonkeys/db60/rev2 -# Enter lower-power sleep mode when on the ChibiOS idle thread -OPT_DEFS += -DCORTEX_ENABLE_WFI_IDLE=TRUE diff --git a/keyboards/cannonkeys/devastatingtkl/config.h b/keyboards/cannonkeys/devastatingtkl/config.h index 947648f59e..e84ffc5e99 100644 --- a/keyboards/cannonkeys/devastatingtkl/config.h +++ b/keyboards/cannonkeys/devastatingtkl/config.h @@ -36,7 +36,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #define RGBLIGHT_EFFECT_RGB_TEST #define RGBLIGHT_EFFECT_ALTERNATING #define RGBLIGHT_EFFECT_TWINKLE -#define RGBLED_NUM 20 #define WS2812_SPI SPID2 #define WS2812_SPI_MOSI_PAL_MODE 0 #define WS2812_SPI_SCK_PAL_MODE 0 diff --git a/keyboards/cannonkeys/devastatingtkl/info.json b/keyboards/cannonkeys/devastatingtkl/info.json index 13a1a2ef48..d25c7ff036 100644 --- a/keyboards/cannonkeys/devastatingtkl/info.json +++ b/keyboards/cannonkeys/devastatingtkl/info.json @@ -18,6 +18,9 @@ "levels": 6, "breathing": true }, + "rgblight": { + "led_count": 20 + }, "ws2812": { "pin": "B15", "driver": "spi" diff --git a/keyboards/cannonkeys/devastatingtkl/rules.mk b/keyboards/cannonkeys/devastatingtkl/rules.mk index b7ab91a339..8d3de1b8b2 100644 --- a/keyboards/cannonkeys/devastatingtkl/rules.mk +++ b/keyboards/cannonkeys/devastatingtkl/rules.mk @@ -13,5 +13,3 @@ NKRO_ENABLE = yes # Enable N-Key Rollover BACKLIGHT_ENABLE = yes RGBLIGHT_ENABLE = yes -# Enter lower-power sleep mode when on the ChibiOS idle thread -OPT_DEFS += -DCORTEX_ENABLE_WFI_IDLE=TRUE diff --git a/keyboards/cannonkeys/gentoo/rules.mk b/keyboards/cannonkeys/gentoo/rules.mk index f56120695a..480e866179 100644 --- a/keyboards/cannonkeys/gentoo/rules.mk +++ b/keyboards/cannonkeys/gentoo/rules.mk @@ -14,5 +14,3 @@ BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow AUDIO_ENABLE = no # Audio output -# Enter lower-power sleep mode when on the ChibiOS idle thread -OPT_DEFS += -DCORTEX_ENABLE_WFI_IDLE=TRUE diff --git a/keyboards/cannonkeys/gentoo_hs/rules.mk b/keyboards/cannonkeys/gentoo_hs/rules.mk index 5b983f1f26..4ee7a29916 100644 --- a/keyboards/cannonkeys/gentoo_hs/rules.mk +++ b/keyboards/cannonkeys/gentoo_hs/rules.mk @@ -14,5 +14,3 @@ BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow AUDIO_ENABLE = no # Audio output -# Enter lower-power sleep mode when on the ChibiOS idle thread -OPT_DEFS += -DCORTEX_ENABLE_WFI_IDLE=TRUE diff --git a/keyboards/cannonkeys/hoodrowg/config.h b/keyboards/cannonkeys/hoodrowg/config.h index 043ee2908a..fb5b024240 100644 --- a/keyboards/cannonkeys/hoodrowg/config.h +++ b/keyboards/cannonkeys/hoodrowg/config.h @@ -17,7 +17,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #pragma once -#define RGBLED_NUM 16 #define RGBLIGHT_EFFECT_BREATHING #define RGBLIGHT_EFFECT_RAINBOW_MOOD #define RGBLIGHT_EFFECT_RAINBOW_SWIRL diff --git a/keyboards/cannonkeys/hoodrowg/info.json b/keyboards/cannonkeys/hoodrowg/info.json index 0ad5b9fbf6..a3a3452d9e 100644 --- a/keyboards/cannonkeys/hoodrowg/info.json +++ b/keyboards/cannonkeys/hoodrowg/info.json @@ -17,6 +17,9 @@ "caps_lock": "B6", "scroll_lock": "B2" }, + "rgblight": { + "led_count": 16 + }, "ws2812": { "pin": "D1" }, diff --git a/keyboards/cannonkeys/instant60/config.h b/keyboards/cannonkeys/instant60/config.h index aced1f333c..e84ffc5e99 100644 --- a/keyboards/cannonkeys/instant60/config.h +++ b/keyboards/cannonkeys/instant60/config.h @@ -36,7 +36,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #define RGBLIGHT_EFFECT_RGB_TEST #define RGBLIGHT_EFFECT_ALTERNATING #define RGBLIGHT_EFFECT_TWINKLE -#define RGBLED_NUM 14 #define WS2812_SPI SPID2 #define WS2812_SPI_MOSI_PAL_MODE 0 #define WS2812_SPI_SCK_PAL_MODE 0 diff --git a/keyboards/cannonkeys/instant60/info.json b/keyboards/cannonkeys/instant60/info.json index 31aeca1e8d..5ca3a78dca 100644 --- a/keyboards/cannonkeys/instant60/info.json +++ b/keyboards/cannonkeys/instant60/info.json @@ -18,6 +18,9 @@ "levels": 6, "breathing": true }, + "rgblight": { + "led_count": 14 + }, "ws2812": { "pin": "B15", "driver": "spi" diff --git a/keyboards/cannonkeys/instant60/rules.mk b/keyboards/cannonkeys/instant60/rules.mk index b7ab91a339..8d3de1b8b2 100644 --- a/keyboards/cannonkeys/instant60/rules.mk +++ b/keyboards/cannonkeys/instant60/rules.mk @@ -13,5 +13,3 @@ NKRO_ENABLE = yes # Enable N-Key Rollover BACKLIGHT_ENABLE = yes RGBLIGHT_ENABLE = yes -# Enter lower-power sleep mode when on the ChibiOS idle thread -OPT_DEFS += -DCORTEX_ENABLE_WFI_IDLE=TRUE diff --git a/keyboards/cannonkeys/instant65/config.h b/keyboards/cannonkeys/instant65/config.h index 65ffa50103..7f5841a299 100644 --- a/keyboards/cannonkeys/instant65/config.h +++ b/keyboards/cannonkeys/instant65/config.h @@ -36,7 +36,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #define RGBLIGHT_EFFECT_RGB_TEST #define RGBLIGHT_EFFECT_ALTERNATING #define RGBLIGHT_EFFECT_TWINKLE -#define RGBLED_NUM 20 #define WS2812_SPI SPID2 #define WS2812_SPI_MOSI_PAL_MODE 0 #define WS2812_SPI_SCK_PAL_MODE 0 diff --git a/keyboards/cannonkeys/instant65/info.json b/keyboards/cannonkeys/instant65/info.json index 23b667cf6c..4db1d0f626 100644 --- a/keyboards/cannonkeys/instant65/info.json +++ b/keyboards/cannonkeys/instant65/info.json @@ -18,6 +18,9 @@ "levels": 6, "breathing": true }, + "rgblight": { + "led_count": 20 + }, "ws2812": { "pin": "B15", "driver": "spi" diff --git a/keyboards/cannonkeys/instant65/rules.mk b/keyboards/cannonkeys/instant65/rules.mk index 42e73a4650..86794ca0f7 100644 --- a/keyboards/cannonkeys/instant65/rules.mk +++ b/keyboards/cannonkeys/instant65/rules.mk @@ -14,5 +14,3 @@ BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality RGBLIGHT_ENABLE = yes # Enable keyboard RGB underglow AUDIO_ENABLE = no # Audio output -# Enter lower-power sleep mode when on the ChibiOS idle thread -OPT_DEFS += -DCORTEX_ENABLE_WFI_IDLE=TRUE diff --git a/keyboards/cannonkeys/iron165/rules.mk b/keyboards/cannonkeys/iron165/rules.mk index 09c801a849..9bdf6b8093 100644 --- a/keyboards/cannonkeys/iron165/rules.mk +++ b/keyboards/cannonkeys/iron165/rules.mk @@ -11,5 +11,3 @@ BACKLIGHT_ENABLE = yes RGBLIGHT_ENABLE = no -# Enter lower-power sleep mode when on the ChibiOS idle thread -OPT_DEFS += -DCORTEX_ENABLE_WFI_IDLE=TRUE diff --git a/keyboards/cannonkeys/leviatan/rules.mk b/keyboards/cannonkeys/leviatan/rules.mk index 2a5031cd32..6dd24d8e06 100644 --- a/keyboards/cannonkeys/leviatan/rules.mk +++ b/keyboards/cannonkeys/leviatan/rules.mk @@ -1,5 +1,3 @@ # Wildcard to allow APM32 MCU DFU_SUFFIX_ARGS = -v FFFF -p FFFF -# Enter lower-power sleep mode when on the ChibiOS idle thread -OPT_DEFS += -DCORTEX_ENABLE_WFI_IDLE=TRUE diff --git a/keyboards/cannonkeys/malicious_ergo/config.h b/keyboards/cannonkeys/malicious_ergo/config.h index 2c1baa101d..4a28aa7d86 100644 --- a/keyboards/cannonkeys/malicious_ergo/config.h +++ b/keyboards/cannonkeys/malicious_ergo/config.h @@ -38,7 +38,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #define RGBLIGHT_EFFECT_RGB_TEST #define RGBLIGHT_EFFECT_ALTERNATING #define RGBLIGHT_EFFECT_TWINKLE -#define RGBLED_NUM 14 #define WS2812_SPI SPID2 #define WS2812_SPI_MOSI_PAL_MODE 0 #define WS2812_SPI_SCK_PAL_MODE 0 diff --git a/keyboards/cannonkeys/malicious_ergo/info.json b/keyboards/cannonkeys/malicious_ergo/info.json index 3b54ee75b6..7fcab147bd 100644 --- a/keyboards/cannonkeys/malicious_ergo/info.json +++ b/keyboards/cannonkeys/malicious_ergo/info.json @@ -18,6 +18,9 @@ "levels": 6, "breathing": true }, + "rgblight": { + "led_count": 14 + }, "ws2812": { "pin": "B15", "driver": "spi" diff --git a/keyboards/cannonkeys/malicious_ergo/rules.mk b/keyboards/cannonkeys/malicious_ergo/rules.mk index 42e73a4650..86794ca0f7 100644 --- a/keyboards/cannonkeys/malicious_ergo/rules.mk +++ b/keyboards/cannonkeys/malicious_ergo/rules.mk @@ -14,5 +14,3 @@ BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality RGBLIGHT_ENABLE = yes # Enable keyboard RGB underglow AUDIO_ENABLE = no # Audio output -# Enter lower-power sleep mode when on the ChibiOS idle thread -OPT_DEFS += -DCORTEX_ENABLE_WFI_IDLE=TRUE diff --git a/keyboards/cannonkeys/obliterated75/config.h b/keyboards/cannonkeys/obliterated75/config.h index 65ffa50103..7f5841a299 100644 --- a/keyboards/cannonkeys/obliterated75/config.h +++ b/keyboards/cannonkeys/obliterated75/config.h @@ -36,7 +36,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #define RGBLIGHT_EFFECT_RGB_TEST #define RGBLIGHT_EFFECT_ALTERNATING #define RGBLIGHT_EFFECT_TWINKLE -#define RGBLED_NUM 20 #define WS2812_SPI SPID2 #define WS2812_SPI_MOSI_PAL_MODE 0 #define WS2812_SPI_SCK_PAL_MODE 0 diff --git a/keyboards/cannonkeys/obliterated75/info.json b/keyboards/cannonkeys/obliterated75/info.json index 678ca4457a..926c41d6d8 100644 --- a/keyboards/cannonkeys/obliterated75/info.json +++ b/keyboards/cannonkeys/obliterated75/info.json @@ -18,6 +18,9 @@ "levels": 6, "breathing": true }, + "rgblight": { + "led_count": 20 + }, "ws2812": { "pin": "B15", "driver": "spi" diff --git a/keyboards/cannonkeys/obliterated75/rules.mk b/keyboards/cannonkeys/obliterated75/rules.mk index 42e73a4650..86794ca0f7 100644 --- a/keyboards/cannonkeys/obliterated75/rules.mk +++ b/keyboards/cannonkeys/obliterated75/rules.mk @@ -14,5 +14,3 @@ BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality RGBLIGHT_ENABLE = yes # Enable keyboard RGB underglow AUDIO_ENABLE = no # Audio output -# Enter lower-power sleep mode when on the ChibiOS idle thread -OPT_DEFS += -DCORTEX_ENABLE_WFI_IDLE=TRUE diff --git a/keyboards/cannonkeys/onyx/rules.mk b/keyboards/cannonkeys/onyx/rules.mk index e58c511435..a5906b6a90 100644 --- a/keyboards/cannonkeys/onyx/rules.mk +++ b/keyboards/cannonkeys/onyx/rules.mk @@ -14,5 +14,3 @@ BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow AUDIO_ENABLE = no # Audio output -# Enter lower-power sleep mode when on the ChibiOS idle thread -OPT_DEFS += -DCORTEX_ENABLE_WFI_IDLE=TRUE diff --git a/keyboards/cannonkeys/ortho48/config.h b/keyboards/cannonkeys/ortho48/config.h index eaf33bbfa0..ec1924949b 100644 --- a/keyboards/cannonkeys/ortho48/config.h +++ b/keyboards/cannonkeys/ortho48/config.h @@ -35,7 +35,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #define RGBLIGHT_EFFECT_RGB_TEST #define RGBLIGHT_EFFECT_ALTERNATING #define RGBLIGHT_EFFECT_TWINKLE -#define RGBLED_NUM 9 #define WS2812_SPI SPID2 /* diff --git a/keyboards/cannonkeys/ortho48/info.json b/keyboards/cannonkeys/ortho48/info.json index dd4879b5be..f972e729cd 100644 --- a/keyboards/cannonkeys/ortho48/info.json +++ b/keyboards/cannonkeys/ortho48/info.json @@ -18,6 +18,9 @@ "levels": 6, "breathing": true }, + "rgblight": { + "led_count": 9 + }, "ws2812": { "pin": "B15", "driver": "spi" diff --git a/keyboards/cannonkeys/ortho48/rules.mk b/keyboards/cannonkeys/ortho48/rules.mk index 57a302eec3..7b6ddd5ad3 100644 --- a/keyboards/cannonkeys/ortho48/rules.mk +++ b/keyboards/cannonkeys/ortho48/rules.mk @@ -11,5 +11,3 @@ BACKLIGHT_ENABLE = yes RGBLIGHT_ENABLE = yes SLEEP_LED_ENABLE = yes -# Enter lower-power sleep mode when on the ChibiOS idle thread -OPT_DEFS += -DCORTEX_ENABLE_WFI_IDLE=TRUE diff --git a/keyboards/cannonkeys/ortho60/config.h b/keyboards/cannonkeys/ortho60/config.h index c8c8c93e51..33acb298b9 100644 --- a/keyboards/cannonkeys/ortho60/config.h +++ b/keyboards/cannonkeys/ortho60/config.h @@ -36,7 +36,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #define RGBLIGHT_EFFECT_ALTERNATING #define RGBLIGHT_EFFECT_TWINKLE -#define RGBLED_NUM 16 #define WS2812_SPI SPID2 /* diff --git a/keyboards/cannonkeys/ortho60/info.json b/keyboards/cannonkeys/ortho60/info.json index 3b672f4f6d..d933cc1989 100644 --- a/keyboards/cannonkeys/ortho60/info.json +++ b/keyboards/cannonkeys/ortho60/info.json @@ -18,6 +18,9 @@ "levels": 6, "breathing": true }, + "rgblight": { + "led_count": 16 + }, "ws2812": { "pin": "B15", "driver": "spi" diff --git a/keyboards/cannonkeys/ortho60/rules.mk b/keyboards/cannonkeys/ortho60/rules.mk index 57a302eec3..7b6ddd5ad3 100644 --- a/keyboards/cannonkeys/ortho60/rules.mk +++ b/keyboards/cannonkeys/ortho60/rules.mk @@ -11,5 +11,3 @@ BACKLIGHT_ENABLE = yes RGBLIGHT_ENABLE = yes SLEEP_LED_ENABLE = yes -# Enter lower-power sleep mode when on the ChibiOS idle thread -OPT_DEFS += -DCORTEX_ENABLE_WFI_IDLE=TRUE diff --git a/keyboards/cannonkeys/ortho75/config.h b/keyboards/cannonkeys/ortho75/config.h index c8c8c93e51..33acb298b9 100644 --- a/keyboards/cannonkeys/ortho75/config.h +++ b/keyboards/cannonkeys/ortho75/config.h @@ -36,7 +36,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #define RGBLIGHT_EFFECT_ALTERNATING #define RGBLIGHT_EFFECT_TWINKLE -#define RGBLED_NUM 16 #define WS2812_SPI SPID2 /* diff --git a/keyboards/cannonkeys/ortho75/info.json b/keyboards/cannonkeys/ortho75/info.json index dd2b78b998..a0dd517d0c 100644 --- a/keyboards/cannonkeys/ortho75/info.json +++ b/keyboards/cannonkeys/ortho75/info.json @@ -23,6 +23,9 @@ "levels": 6, "breathing": true }, + "rgblight": { + "led_count": 16 + }, "ws2812": { "pin": "B15", "driver": "spi" diff --git a/keyboards/cannonkeys/ortho75/rules.mk b/keyboards/cannonkeys/ortho75/rules.mk index 2407875062..5a1f61bac0 100644 --- a/keyboards/cannonkeys/ortho75/rules.mk +++ b/keyboards/cannonkeys/ortho75/rules.mk @@ -12,5 +12,3 @@ RGBLIGHT_ENABLE = yes SLEEP_LED_ENABLE = yes ENCODER_ENABLE = yes -# Enter lower-power sleep mode when on the ChibiOS idle thread -OPT_DEFS += -DCORTEX_ENABLE_WFI_IDLE=TRUE diff --git a/keyboards/cannonkeys/practice60/config.h b/keyboards/cannonkeys/practice60/config.h index c766c83f65..33acb298b9 100644 --- a/keyboards/cannonkeys/practice60/config.h +++ b/keyboards/cannonkeys/practice60/config.h @@ -36,7 +36,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #define RGBLIGHT_EFFECT_ALTERNATING #define RGBLIGHT_EFFECT_TWINKLE -#define RGBLED_NUM 9 #define WS2812_SPI SPID2 /* diff --git a/keyboards/cannonkeys/practice60/info.json b/keyboards/cannonkeys/practice60/info.json index a1313242fa..aa1ca1259f 100644 --- a/keyboards/cannonkeys/practice60/info.json +++ b/keyboards/cannonkeys/practice60/info.json @@ -18,6 +18,9 @@ "levels": 6, "breathing": true }, + "rgblight": { + "led_count": 9 + }, "ws2812": { "pin": "B15", "driver": "spi" diff --git a/keyboards/cannonkeys/practice60/rules.mk b/keyboards/cannonkeys/practice60/rules.mk index 01c330aeb6..544fe68a88 100644 --- a/keyboards/cannonkeys/practice60/rules.mk +++ b/keyboards/cannonkeys/practice60/rules.mk @@ -14,5 +14,3 @@ SLEEP_LED_ENABLE = yes DEFAULT_FOLDER = cannonkeys/practice60 -# Enter lower-power sleep mode when on the ChibiOS idle thread -OPT_DEFS += -DCORTEX_ENABLE_WFI_IDLE=TRUE diff --git a/keyboards/cannonkeys/practice65/config.h b/keyboards/cannonkeys/practice65/config.h index 0163604ead..33acb298b9 100644 --- a/keyboards/cannonkeys/practice65/config.h +++ b/keyboards/cannonkeys/practice65/config.h @@ -36,7 +36,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #define RGBLIGHT_EFFECT_ALTERNATING #define RGBLIGHT_EFFECT_TWINKLE -#define RGBLED_NUM 20 #define WS2812_SPI SPID2 /* diff --git a/keyboards/cannonkeys/practice65/info.json b/keyboards/cannonkeys/practice65/info.json index 28841b48a6..ac4a7bd272 100644 --- a/keyboards/cannonkeys/practice65/info.json +++ b/keyboards/cannonkeys/practice65/info.json @@ -18,6 +18,9 @@ "levels": 6, "breathing": true }, + "rgblight": { + "led_count": 20 + }, "ws2812": { "pin": "B15", "driver": "spi" diff --git a/keyboards/cannonkeys/practice65/rules.mk b/keyboards/cannonkeys/practice65/rules.mk index 57a302eec3..7b6ddd5ad3 100644 --- a/keyboards/cannonkeys/practice65/rules.mk +++ b/keyboards/cannonkeys/practice65/rules.mk @@ -11,5 +11,3 @@ BACKLIGHT_ENABLE = yes RGBLIGHT_ENABLE = yes SLEEP_LED_ENABLE = yes -# Enter lower-power sleep mode when on the ChibiOS idle thread -OPT_DEFS += -DCORTEX_ENABLE_WFI_IDLE=TRUE diff --git a/keyboards/cannonkeys/rekt1800/rules.mk b/keyboards/cannonkeys/rekt1800/rules.mk index 32e7be7370..01d0c0ade1 100644 --- a/keyboards/cannonkeys/rekt1800/rules.mk +++ b/keyboards/cannonkeys/rekt1800/rules.mk @@ -13,5 +13,3 @@ NKRO_ENABLE = yes # Enable N-Key Rollover BACKLIGHT_ENABLE = yes RGBLIGHT_ENABLE = no -# Enter lower-power sleep mode when on the ChibiOS idle thread -OPT_DEFS += -DCORTEX_ENABLE_WFI_IDLE=TRUE diff --git a/keyboards/cannonkeys/ripple/rules.mk b/keyboards/cannonkeys/ripple/rules.mk index 2a5031cd32..6dd24d8e06 100644 --- a/keyboards/cannonkeys/ripple/rules.mk +++ b/keyboards/cannonkeys/ripple/rules.mk @@ -1,5 +1,3 @@ # Wildcard to allow APM32 MCU DFU_SUFFIX_ARGS = -v FFFF -p FFFF -# Enter lower-power sleep mode when on the ChibiOS idle thread -OPT_DEFS += -DCORTEX_ENABLE_WFI_IDLE=TRUE diff --git a/keyboards/cannonkeys/ripple_hs/rules.mk b/keyboards/cannonkeys/ripple_hs/rules.mk index 2a5031cd32..6dd24d8e06 100644 --- a/keyboards/cannonkeys/ripple_hs/rules.mk +++ b/keyboards/cannonkeys/ripple_hs/rules.mk @@ -1,5 +1,3 @@ # Wildcard to allow APM32 MCU DFU_SUFFIX_ARGS = -v FFFF -p FFFF -# Enter lower-power sleep mode when on the ChibiOS idle thread -OPT_DEFS += -DCORTEX_ENABLE_WFI_IDLE=TRUE diff --git a/keyboards/cannonkeys/sagittarius/config.h b/keyboards/cannonkeys/sagittarius/config.h index 29c78c2398..925046aa4f 100644 --- a/keyboards/cannonkeys/sagittarius/config.h +++ b/keyboards/cannonkeys/sagittarius/config.h @@ -37,7 +37,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #define RGBLIGHT_EFFECT_ALTERNATING #define RGBLIGHT_EFFECT_TWINKLE -#define RGBLED_NUM 8 #define WS2812_SPI SPID2 #define WS2812_SPI_MOSI_PAL_MODE 0 #define WS2812_SPI_SCK_PAL_MODE 0 diff --git a/keyboards/cannonkeys/sagittarius/info.json b/keyboards/cannonkeys/sagittarius/info.json index 0980cb4275..df90b9db0a 100644 --- a/keyboards/cannonkeys/sagittarius/info.json +++ b/keyboards/cannonkeys/sagittarius/info.json @@ -18,6 +18,9 @@ "levels": 6, "breathing": true }, + "rgblight": { + "led_count": 8 + }, "ws2812": { "pin": "B15", "driver": "spi" diff --git a/keyboards/cannonkeys/sagittarius/rules.mk b/keyboards/cannonkeys/sagittarius/rules.mk index 42e73a4650..86794ca0f7 100644 --- a/keyboards/cannonkeys/sagittarius/rules.mk +++ b/keyboards/cannonkeys/sagittarius/rules.mk @@ -14,5 +14,3 @@ BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality RGBLIGHT_ENABLE = yes # Enable keyboard RGB underglow AUDIO_ENABLE = no # Audio output -# Enter lower-power sleep mode when on the ChibiOS idle thread -OPT_DEFS += -DCORTEX_ENABLE_WFI_IDLE=TRUE diff --git a/keyboards/cannonkeys/satisfaction75/rules.mk b/keyboards/cannonkeys/satisfaction75/rules.mk index 9f6480ee0e..35c6daa727 100644 --- a/keyboards/cannonkeys/satisfaction75/rules.mk +++ b/keyboards/cannonkeys/satisfaction75/rules.mk @@ -21,5 +21,3 @@ OLED_DRIVER = SSD1306 DEFAULT_FOLDER = cannonkeys/satisfaction75/rev1 -# Enter lower-power sleep mode when on the ChibiOS idle thread -OPT_DEFS += -DCORTEX_ENABLE_WFI_IDLE=TRUE diff --git a/keyboards/cannonkeys/satisfaction75/satisfaction75.c b/keyboards/cannonkeys/satisfaction75/satisfaction75.c index ce870c49af..29fb6e7619 100644 --- a/keyboards/cannonkeys/satisfaction75/satisfaction75.c +++ b/keyboards/cannonkeys/satisfaction75/satisfaction75.c @@ -243,22 +243,22 @@ void via_custom_value_command(uint8_t *data, uint8_t length) { void read_host_led_state(void) { - uint8_t leds = host_keyboard_leds(); - if (leds & (1 << USB_LED_NUM_LOCK)) { + led_t led_state = host_keyboard_led_state(); + if (led_state.num_lock) { if (led_numlock == false){ led_numlock = true;} } else { if (led_numlock == true){ led_numlock = false;} } - if (leds & (1 << USB_LED_CAPS_LOCK)) { + if (led_state.caps_lock) { if (led_capslock == false){ led_capslock = true;} } else { if (led_capslock == true){ led_capslock = false;} } - if (leds & (1 << USB_LED_SCROLL_LOCK)) { + if (led_state.scroll_lock) { if (led_scrolllock == false){ led_scrolllock = true;} } else { diff --git a/keyboards/cannonkeys/savage65/config.h b/keyboards/cannonkeys/savage65/config.h index 6aac0aefb4..21420a9f28 100644 --- a/keyboards/cannonkeys/savage65/config.h +++ b/keyboards/cannonkeys/savage65/config.h @@ -37,7 +37,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #define RGBLIGHT_EFFECT_ALTERNATING #define RGBLIGHT_EFFECT_TWINKLE -#define RGBLED_NUM 20 #define WS2812_SPI SPID2 #define WS2812_SPI_MOSI_PAL_MODE 0 #define WS2812_SPI_SCK_PAL_MODE 0 diff --git a/keyboards/cannonkeys/savage65/info.json b/keyboards/cannonkeys/savage65/info.json index 540327c6b8..596ee91dc9 100644 --- a/keyboards/cannonkeys/savage65/info.json +++ b/keyboards/cannonkeys/savage65/info.json @@ -18,6 +18,9 @@ "levels": 6, "breathing": true }, + "rgblight": { + "led_count": 20 + }, "ws2812": { "pin": "B15", "driver": "spi" diff --git a/keyboards/cannonkeys/savage65/rules.mk b/keyboards/cannonkeys/savage65/rules.mk index b7ab91a339..8d3de1b8b2 100644 --- a/keyboards/cannonkeys/savage65/rules.mk +++ b/keyboards/cannonkeys/savage65/rules.mk @@ -13,5 +13,3 @@ NKRO_ENABLE = yes # Enable N-Key Rollover BACKLIGHT_ENABLE = yes RGBLIGHT_ENABLE = yes -# Enter lower-power sleep mode when on the ChibiOS idle thread -OPT_DEFS += -DCORTEX_ENABLE_WFI_IDLE=TRUE diff --git a/keyboards/cannonkeys/tmov2/config.h b/keyboards/cannonkeys/tmov2/config.h index d344ffaee6..60a4a44990 100644 --- a/keyboards/cannonkeys/tmov2/config.h +++ b/keyboards/cannonkeys/tmov2/config.h @@ -37,7 +37,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #define RGBLIGHT_EFFECT_ALTERNATING #define RGBLIGHT_EFFECT_TWINKLE -#define RGBLED_NUM 22 #define WS2812_SPI SPID2 #define WS2812_SPI_MOSI_PAL_MODE 0 #define WS2812_SPI_SCK_PAL_MODE 0 diff --git a/keyboards/cannonkeys/tmov2/info.json b/keyboards/cannonkeys/tmov2/info.json index 4d5d564e66..1caf127069 100644 --- a/keyboards/cannonkeys/tmov2/info.json +++ b/keyboards/cannonkeys/tmov2/info.json @@ -18,6 +18,9 @@ "levels": 6, "breathing": true }, + "rgblight": { + "led_count": 22 + }, "ws2812": { "pin": "B15", "driver": "spi" diff --git a/keyboards/cannonkeys/tmov2/rules.mk b/keyboards/cannonkeys/tmov2/rules.mk index b7ab91a339..8d3de1b8b2 100644 --- a/keyboards/cannonkeys/tmov2/rules.mk +++ b/keyboards/cannonkeys/tmov2/rules.mk @@ -13,5 +13,3 @@ NKRO_ENABLE = yes # Enable N-Key Rollover BACKLIGHT_ENABLE = yes RGBLIGHT_ENABLE = yes -# Enter lower-power sleep mode when on the ChibiOS idle thread -OPT_DEFS += -DCORTEX_ENABLE_WFI_IDLE=TRUE diff --git a/keyboards/cannonkeys/tsukuyomi/config.h b/keyboards/cannonkeys/tsukuyomi/config.h index 6aac0aefb4..21420a9f28 100644 --- a/keyboards/cannonkeys/tsukuyomi/config.h +++ b/keyboards/cannonkeys/tsukuyomi/config.h @@ -37,7 +37,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #define RGBLIGHT_EFFECT_ALTERNATING #define RGBLIGHT_EFFECT_TWINKLE -#define RGBLED_NUM 20 #define WS2812_SPI SPID2 #define WS2812_SPI_MOSI_PAL_MODE 0 #define WS2812_SPI_SCK_PAL_MODE 0 diff --git a/keyboards/cannonkeys/tsukuyomi/info.json b/keyboards/cannonkeys/tsukuyomi/info.json index e370e1acc0..a2b7022f53 100644 --- a/keyboards/cannonkeys/tsukuyomi/info.json +++ b/keyboards/cannonkeys/tsukuyomi/info.json @@ -18,6 +18,9 @@ "levels": 6, "breathing": true }, + "rgblight": { + "led_count": 20 + }, "ws2812": { "pin": "B15", "driver": "spi" diff --git a/keyboards/cannonkeys/tsukuyomi/rules.mk b/keyboards/cannonkeys/tsukuyomi/rules.mk index 42e73a4650..86794ca0f7 100644 --- a/keyboards/cannonkeys/tsukuyomi/rules.mk +++ b/keyboards/cannonkeys/tsukuyomi/rules.mk @@ -14,5 +14,3 @@ BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality RGBLIGHT_ENABLE = yes # Enable keyboard RGB underglow AUDIO_ENABLE = no # Audio output -# Enter lower-power sleep mode when on the ChibiOS idle thread -OPT_DEFS += -DCORTEX_ENABLE_WFI_IDLE=TRUE diff --git a/keyboards/cannonkeys/vicious40/rules.mk b/keyboards/cannonkeys/vicious40/rules.mk index df23201719..9d14eaf9aa 100644 --- a/keyboards/cannonkeys/vicious40/rules.mk +++ b/keyboards/cannonkeys/vicious40/rules.mk @@ -14,5 +14,3 @@ BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow AUDIO_ENABLE = no # Audio output -# Enter lower-power sleep mode when on the ChibiOS idle thread -OPT_DEFS += -DCORTEX_ENABLE_WFI_IDLE=TRUE diff --git a/keyboards/capsunlocked/cu24/config.h b/keyboards/capsunlocked/cu24/config.h index 1d8a04fe70..2f8d64b767 100644 --- a/keyboards/capsunlocked/cu24/config.h +++ b/keyboards/capsunlocked/cu24/config.h @@ -17,7 +17,6 @@ #pragma once /* RGB Glow */ -#define RGBLED_NUM 5 // Number of LEDs in your strip #define RGBLIGHT_EFFECT_BREATHING #define RGBLIGHT_EFFECT_RAINBOW_MOOD #define RGBLIGHT_EFFECT_RAINBOW_SWIRL diff --git a/keyboards/capsunlocked/cu24/info.json b/keyboards/capsunlocked/cu24/info.json index c7d6660f13..cea21c4c0d 100644 --- a/keyboards/capsunlocked/cu24/info.json +++ b/keyboards/capsunlocked/cu24/info.json @@ -18,6 +18,9 @@ "levels": 5, "breathing": true }, + "rgblight": { + "led_count": 5 + }, "ws2812": { "pin": "F4" }, diff --git a/keyboards/capsunlocked/cu7/config.h b/keyboards/capsunlocked/cu7/config.h index 8883514e5d..fc0ac23947 100644 --- a/keyboards/capsunlocked/cu7/config.h +++ b/keyboards/capsunlocked/cu7/config.h @@ -33,7 +33,3 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #define RGBLIGHT_EFFECT_TWINKLE // #define RGBLIGHT_EFFECT_BREATHING -#define RGBLED_NUM 6 -#define RGBLIGHT_HUE_STEP 10 -#define RGBLIGHT_SAT_STEP 17 -#define RGBLIGHT_VAL_STEP 17 diff --git a/keyboards/capsunlocked/cu7/info.json b/keyboards/capsunlocked/cu7/info.json index 61182fcb53..f9fada284d 100644 --- a/keyboards/capsunlocked/cu7/info.json +++ b/keyboards/capsunlocked/cu7/info.json @@ -12,6 +12,8 @@ "pin": "F1" }, "rgblight": { + "hue_steps": 10, + "led_count": 6, "max_brightness": 50 }, "matrix_pins": { diff --git a/keyboards/capsunlocked/cu75/config.h b/keyboards/capsunlocked/cu75/config.h index 67f1f43c44..d6760e89f2 100644 --- a/keyboards/capsunlocked/cu75/config.h +++ b/keyboards/capsunlocked/cu75/config.h @@ -17,7 +17,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #pragma once -#define RGBLED_NUM 24 // Number of LEDs #define RGBLIGHT_EFFECT_BREATHING #define RGBLIGHT_EFFECT_RAINBOW_MOOD #define RGBLIGHT_EFFECT_RAINBOW_SWIRL @@ -29,10 +28,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #define RGBLIGHT_EFFECT_ALTERNATING #define RGBLIGHT_EFFECT_TWINKLE -#define RGBLIGHT_HUE_STEP 10 -#define RGBLIGHT_SAT_STEP 17 -#define RGBLIGHT_VAL_STEP 17 - #define BACKLIGHT_PWM_MAP {8, 16, 40, 55, 70, 128, 200, 255} /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ diff --git a/keyboards/capsunlocked/cu75/info.json b/keyboards/capsunlocked/cu75/info.json index 3ea17a46e1..5698fc101e 100644 --- a/keyboards/capsunlocked/cu75/info.json +++ b/keyboards/capsunlocked/cu75/info.json @@ -17,6 +17,10 @@ "driver": "custom", "levels": 8 }, + "rgblight": { + "hue_steps": 10, + "led_count": 24 + }, "ws2812": { "pin": "C7" }, diff --git a/keyboards/capsunlocked/cu80/v2/ansi/ansi.c b/keyboards/capsunlocked/cu80/v2/ansi/ansi.c new file mode 100644 index 0000000000..9967388153 --- /dev/null +++ b/keyboards/capsunlocked/cu80/v2/ansi/ansi.c @@ -0,0 +1,20 @@ +// Copyright 2021 CapsUnlocked +// SPDX-License-Identifier: GPL-2.0-or-later +#include "quantum.h" + +#ifdef RGB_MATRIX_ENABLE +led_config_t g_led_config = { + { + {0, NO_LED, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15}, + {32, 31, 30, 29, 28, 27, 26, 25, 24, 23, 22, 21, 20, 19, 18, 17, 16}, + {33, 34, 35, 36, 37, 38, 39, 40, 41, 42, 43, 44, 45, 46, 47, 48, 49}, + {62, 61, 60, 59, 58, 57, 56, 55, 54, 53, 52, 51, 50}, + {63, NO_LED, 64, 65, 66, 67, 68, 69, 70, 71, 72, 73, 74, NO_LED, NO_LED, 75}, + {86, 85, 84, NO_LED, NO_LED, 83, NO_LED, NO_LED, NO_LED, 82, 81, 80, 79, 78, NO_LED, 77, 76} + }, { + {0, 0}, {28, 0}, {42, 0}, {56, 0}, {71, 0}, {85, 0}, {99, 0}, {113, 0}, {127, 0}, {141, 0}, {155, 0}, {169, 0}, {184, 0}, {198, 0}, {212, 0}, {226, 0}, {226, 13}, {212, 13}, {198, 13}, {184, 13}, {169, 13}, {155, 13}, {141, 13}, {127, 13}, {113, 13}, {99, 13}, {85, 13}, {71, 13}, {56, 13}, {42, 13}, {28, 13}, {14, 13}, {0, 13}, {0, 26}, {14, 26}, {28, 26}, {42, 26}, {56, 26}, {71, 26}, {85, 26}, {99, 26}, {113, 26}, {127, 26}, {141, 26}, {155, 26}, {169, 26}, {184, 26}, {198, 26}, {212, 26}, {226, 26}, {169, 38}, {155, 38}, {141, 38}, {127, 38}, {113, 38}, {99, 38}, {85, 38}, {71, 38}, {56, 38}, {42, 38}, {28, 38}, {14, 38}, {0, 38}, {0, 51}, {28, 51}, {42, 51}, {56, 51}, {71, 51}, {85, 51}, {99, 51}, {113, 51}, {127, 51}, {141, 51}, {155, 51}, {169, 51}, {212, 51}, {226, 64}, {212, 64}, {184, 64}, {169, 64}, {155, 64}, {141, 64}, {127, 64}, {71, 64}, {28, 64}, {14, 64}, {0, 64} + }, { + 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 8, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 8, 1, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 1, 4, 4, 4, 4, 1, 1, 1, 1, 4, 1, 1, 1 + } +}; +#endif diff --git a/keyboards/capsunlocked/cu80/v2/ansi/config.h b/keyboards/capsunlocked/cu80/v2/ansi/config.h new file mode 100644 index 0000000000..638c9a820f --- /dev/null +++ b/keyboards/capsunlocked/cu80/v2/ansi/config.h @@ -0,0 +1,8 @@ +// Copyright 2021 CapsUnlocked +// SPDX-License-Identifier: GPL-2.0-or-later +#pragma once + +#ifdef RGB_MATRIX_ENABLE +# define RGB_MATRIX_LED_COUNT 87 +# define RGB_MATRIX_KEYPRESSES +#endif diff --git a/keyboards/capsunlocked/cu80/v2_ansi/base/info.json b/keyboards/capsunlocked/cu80/v2/ansi/info.json index 9dc24b5e40..9dc24b5e40 100644 --- a/keyboards/capsunlocked/cu80/v2_ansi/base/info.json +++ b/keyboards/capsunlocked/cu80/v2/ansi/info.json diff --git a/keyboards/capsunlocked/cu80/v2_ansi/keymaps/default/keymap.c b/keyboards/capsunlocked/cu80/v2/ansi/keymaps/default/keymap.c index ee81be6561..5e13e10d15 100644 --- a/keyboards/capsunlocked/cu80/v2_ansi/keymaps/default/keymap.c +++ b/keyboards/capsunlocked/cu80/v2/ansi/keymaps/default/keymap.c @@ -34,5 +34,5 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, NK_TOGG, _______, _______, _______, _______, _______, RGB_SPD, _______, _______, _______, _______, _______, _______, _______, _______, RGB_RMOD,RGB_TOG, RGB_MOD - ), + ) }; diff --git a/keyboards/capsunlocked/cu80/v2_ansi/keymaps/via/keymap.c b/keyboards/capsunlocked/cu80/v2/ansi/keymaps/via/keymap.c index 5ee09fadac..aeef5a1255 100644 --- a/keyboards/capsunlocked/cu80/v2_ansi/keymaps/via/keymap.c +++ b/keyboards/capsunlocked/cu80/v2/ansi/keymaps/via/keymap.c @@ -33,23 +33,5 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, NK_TOGG, _______, _______, _______, _______, _______, RGB_SPD, _______, _______, _______, _______, _______, _______, _______, _______, RGB_RMOD,RGB_TOG, RGB_MOD - ), - [2] = LAYOUT_tkl_ansi( - _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, - - _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, - _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, - _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, - _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, - _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______ - ), - [3] = LAYOUT_tkl_ansi( - _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, - - _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, - _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, - _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, - _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, - _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______ - ), + ) }; diff --git a/keyboards/capsunlocked/cu80/v2_ansi/keymaps/via/rules.mk b/keyboards/capsunlocked/cu80/v2/ansi/keymaps/via/rules.mk index 1e5b99807c..1e5b99807c 100644 --- a/keyboards/capsunlocked/cu80/v2_ansi/keymaps/via/rules.mk +++ b/keyboards/capsunlocked/cu80/v2/ansi/keymaps/via/rules.mk diff --git a/keyboards/capsunlocked/cu80/v2/ansi/rules.mk b/keyboards/capsunlocked/cu80/v2/ansi/rules.mk new file mode 100644 index 0000000000..6e7633bfe0 --- /dev/null +++ b/keyboards/capsunlocked/cu80/v2/ansi/rules.mk @@ -0,0 +1 @@ +# This file intentionally left blank diff --git a/keyboards/capsunlocked/cu80/v2/info.json b/keyboards/capsunlocked/cu80/v2/info.json new file mode 100644 index 0000000000..f7036daa7f --- /dev/null +++ b/keyboards/capsunlocked/cu80/v2/info.json @@ -0,0 +1,265 @@ +{ + "manufacturer": "CapsUnlocked", + "maintainer": "rys / maz0r", + "processor": "atmega32u4", + "bootloader": "atmel-dfu", + "diode_direction": "COL2ROW", + "features": { + "bootmagic": true, + "extrakey": true, + "mousekey": true, + "nkro": true, + "rgb_matrix": true + }, + "build": { + "lto": true + }, + "matrix_pins": { + "cols": ["B0", "B1", "B2", "B3", "F4", "F5", "F6", "F7", "B6", "B5", "D7", "B4", "D6", "F0", "D1", "C6", "D4"], + "rows": ["D3", "D2", "B7", "F1", "C7", "D5"] + }, + "rgb_matrix": { + "driver": "WS2812", + "animations": { + "alphas_mods": true, + "band_pinwheel_sat": true, + "band_pinwheel_val": true, + "band_sat": true, + "band_spiral_sat": true, + "band_spiral_val": true, + "band_val": true, + "breathing": true, + "cycle_all": true, + "cycle_left_right": true, + "cycle_out_in": true, + "cycle_out_in_dual": true, + "cycle_pinwheel": true, + "cycle_spiral": true, + "cycle_up_down": true, + "digital_rain": true, + "dual_beacon": true, + "gradient_left_right": true, + "gradient_up_down": true, + "hue_breathing": true, + "hue_pendulum": true, + "hue_wave": true, + "jellybean_raindrops": true, + "multisplash": true, + "pixel_flow": true, + "pixel_fractal": true, + "pixel_rain": true, + "rainbow_beacon": true, + "rainbow_moving_chevron": true, + "rainbow_pinwheels": true, + "raindrops": true, + "solid_color": true, + "solid_multisplash": true, + "solid_reactive": true, + "solid_reactive_cross": true, + "solid_reactive_multicross": true, + "solid_reactive_multinexus": true, + "solid_reactive_multiwide": true, + "solid_reactive_nexus": true, + "solid_reactive_simple": true, + "solid_reactive_wide": true, + "solid_splash": true, + "splash": true, + "typing_heatmap": true + } + }, + "url": "https://caps-unlocked.com/cu80-round-2/", + "usb": { + "device_version": "0.0.1", + "vid": "0x4355", + "no_startup_check": true + }, + "ws2812": { + "pin": "E6" + }, + "community_layouts": ["tkl_ansi", "tkl_iso"], + "layouts": { + "LAYOUT_tkl_ansi": { + "layout": [ + {"matrix": [0, 0], "x": 0, "y": 0}, + {"matrix": [0, 2], "x": 2, "y": 0}, + {"matrix": [0, 3], "x": 3, "y": 0}, + {"matrix": [0, 4], "x": 4, "y": 0}, + {"matrix": [0, 5], "x": 5, "y": 0}, + {"matrix": [0, 6], "x": 6.5, "y": 0}, + {"matrix": [0, 7], "x": 7.5, "y": 0}, + {"matrix": [0, 8], "x": 8.5, "y": 0}, + {"matrix": [0, 9], "x": 9.5, "y": 0}, + {"matrix": [0, 10], "x": 11, "y": 0}, + {"matrix": [0, 11], "x": 12, "y": 0}, + {"matrix": [0, 12], "x": 13, "y": 0}, + {"matrix": [0, 13], "x": 14, "y": 0}, + {"matrix": [0, 14], "x": 15.25, "y": 0}, + {"matrix": [0, 15], "x": 16.25, "y": 0}, + {"matrix": [0, 16], "x": 17.25, "y": 0}, + {"matrix": [1, 0], "x": 0, "y": 1.5}, + {"matrix": [1, 1], "x": 1, "y": 1.5}, + {"matrix": [1, 2], "x": 2, "y": 1.5}, + {"matrix": [1, 3], "x": 3, "y": 1.5}, + {"matrix": [1, 4], "x": 4, "y": 1.5}, + {"matrix": [1, 5], "x": 5, "y": 1.5}, + {"matrix": [1, 6], "x": 6, "y": 1.5}, + {"matrix": [1, 7], "x": 7, "y": 1.5}, + {"matrix": [1, 8], "x": 8, "y": 1.5}, + {"matrix": [1, 9], "x": 9, "y": 1.5}, + {"matrix": [1, 10], "x": 10, "y": 1.5}, + {"matrix": [1, 11], "x": 11, "y": 1.5}, + {"matrix": [1, 12], "x": 12, "y": 1.5}, + {"matrix": [1, 13], "x": 13, "y": 1.5, "w": 2}, + {"matrix": [1, 14], "x": 15.25, "y": 1.5}, + {"matrix": [1, 15], "x": 16.25, "y": 1.5}, + {"matrix": [1, 16], "x": 17.25, "y": 1.5}, + {"matrix": [2, 0], "x": 0, "y": 2.5, "w": 1.5}, + {"matrix": [2, 1], "x": 1.5, "y": 2.5}, + {"matrix": [2, 2], "x": 2.5, "y": 2.5}, + {"matrix": [2, 3], "x": 3.5, "y": 2.5}, + {"matrix": [2, 4], "x": 4.5, "y": 2.5}, + {"matrix": [2, 5], "x": 5.5, "y": 2.5}, + {"matrix": [2, 6], "x": 6.5, "y": 2.5}, + {"matrix": [2, 7], "x": 7.5, "y": 2.5}, + {"matrix": [2, 8], "x": 8.5, "y": 2.5}, + {"matrix": [2, 9], "x": 9.5, "y": 2.5}, + {"matrix": [2, 10], "x": 10.5, "y": 2.5}, + {"matrix": [2, 11], "x": 11.5, "y": 2.5}, + {"matrix": [2, 12], "x": 12.5, "y": 2.5}, + {"matrix": [2, 13], "x": 13.5, "y": 2.5, "w": 1.5}, + {"matrix": [2, 14], "x": 15.25, "y": 2.5}, + {"matrix": [2, 15], "x": 16.25, "y": 2.5}, + {"matrix": [2, 16], "x": 17.25, "y": 2.5}, + {"matrix": [3, 0], "x": 0, "y": 3.5, "w": 1.75}, + {"matrix": [3, 1], "x": 1.75, "y": 3.5}, + {"matrix": [3, 2], "x": 2.75, "y": 3.5}, + {"matrix": [3, 3], "x": 3.75, "y": 3.5}, + {"matrix": [3, 4], "x": 4.75, "y": 3.5}, + {"matrix": [3, 5], "x": 5.75, "y": 3.5}, + {"matrix": [3, 6], "x": 6.75, "y": 3.5}, + {"matrix": [3, 7], "x": 7.75, "y": 3.5}, + {"matrix": [3, 8], "x": 8.75, "y": 3.5}, + {"matrix": [3, 9], "x": 9.75, "y": 3.5}, + {"matrix": [3, 10], "x": 10.75, "y": 3.5}, + {"matrix": [3, 11], "x": 11.75, "y": 3.5}, + {"matrix": [3, 12], "x": 12.75, "y": 3.5, "w": 2.25}, + {"matrix": [4, 0], "x": 0, "y": 4.5, "w": 2.25}, + {"matrix": [4, 2], "x": 2.25, "y": 4.5}, + {"matrix": [4, 3], "x": 3.25, "y": 4.5}, + {"matrix": [4, 4], "x": 4.25, "y": 4.5}, + {"matrix": [4, 5], "x": 5.25, "y": 4.5}, + {"matrix": [4, 6], "x": 6.25, "y": 4.5}, + {"matrix": [4, 7], "x": 7.25, "y": 4.5}, + {"matrix": [4, 8], "x": 8.25, "y": 4.5}, + {"matrix": [4, 9], "x": 9.25, "y": 4.5}, + {"matrix": [4, 10], "x": 10.25, "y": 4.5}, + {"matrix": [4, 11], "x": 11.25, "y": 4.5}, + {"matrix": [4, 12], "x": 12.25, "y": 4.5, "w": 2.75}, + {"matrix": [4, 15], "x": 16.25, "y": 4.5}, + {"matrix": [5, 0], "x": 0, "y": 5.5, "w": 1.25}, + {"matrix": [5, 1], "x": 1.25, "y": 5.5, "w": 1.25}, + {"matrix": [5, 2], "x": 2.5, "y": 5.5, "w": 1.25}, + {"matrix": [5, 5], "x": 3.75, "y": 5.5, "w": 6.25}, + {"matrix": [5, 9], "x": 10, "y": 5.5, "w": 1.25}, + {"matrix": [5, 10], "x": 11.25, "y": 5.5, "w": 1.25}, + {"matrix": [5, 11], "x": 12.5, "y": 5.5, "w": 1.25}, + {"matrix": [5, 12], "x": 13.75, "y": 5.5, "w": 1.25}, + {"matrix": [5, 13], "x": 15.25, "y": 5.5}, + {"matrix": [5, 15], "x": 16.25, "y": 5.5}, + {"matrix": [5, 16], "x": 17.25, "y": 5.5} + ] + }, + "LAYOUT_tkl_iso": { + "layout": [ + {"matrix": [0, 0], "x": 0, "y": 0}, + {"matrix": [0, 2], "x": 2, "y": 0}, + {"matrix": [0, 3], "x": 3, "y": 0}, + {"matrix": [0, 4], "x": 4, "y": 0}, + {"matrix": [0, 5], "x": 5, "y": 0}, + {"matrix": [0, 6], "x": 6.5, "y": 0}, + {"matrix": [0, 7], "x": 7.5, "y": 0}, + {"matrix": [0, 8], "x": 8.5, "y": 0}, + {"matrix": [0, 9], "x": 9.5, "y": 0}, + {"matrix": [0, 10], "x": 11, "y": 0}, + {"matrix": [0, 11], "x": 12, "y": 0}, + {"matrix": [0, 12], "x": 13, "y": 0}, + {"matrix": [0, 13], "x": 14, "y": 0}, + {"matrix": [0, 14], "x": 15.25, "y": 0}, + {"matrix": [0, 15], "x": 16.25, "y": 0}, + {"matrix": [0, 16], "x": 17.25, "y": 0}, + {"matrix": [1, 0], "x": 0, "y": 1.5}, + {"matrix": [1, 1], "x": 1, "y": 1.5}, + {"matrix": [1, 2], "x": 2, "y": 1.5}, + {"matrix": [1, 3], "x": 3, "y": 1.5}, + {"matrix": [1, 4], "x": 4, "y": 1.5}, + {"matrix": [1, 5], "x": 5, "y": 1.5}, + {"matrix": [1, 6], "x": 6, "y": 1.5}, + {"matrix": [1, 7], "x": 7, "y": 1.5}, + {"matrix": [1, 8], "x": 8, "y": 1.5}, + {"matrix": [1, 9], "x": 9, "y": 1.5}, + {"matrix": [1, 10], "x": 10, "y": 1.5}, + {"matrix": [1, 11], "x": 11, "y": 1.5}, + {"matrix": [1, 12], "x": 12, "y": 1.5}, + {"matrix": [1, 13], "x": 13, "y": 1.5, "w": 2}, + {"matrix": [1, 14], "x": 15.25, "y": 1.5}, + {"matrix": [1, 15], "x": 16.25, "y": 1.5}, + {"matrix": [1, 16], "x": 17.25, "y": 1.5}, + {"matrix": [2, 0], "x": 0, "y": 2.5, "w": 1.5}, + {"matrix": [2, 1], "x": 1.5, "y": 2.5}, + {"matrix": [2, 2], "x": 2.5, "y": 2.5}, + {"matrix": [2, 3], "x": 3.5, "y": 2.5}, + {"matrix": [2, 4], "x": 4.5, "y": 2.5}, + {"matrix": [2, 5], "x": 5.5, "y": 2.5}, + {"matrix": [2, 6], "x": 6.5, "y": 2.5}, + {"matrix": [2, 7], "x": 7.5, "y": 2.5}, + {"matrix": [2, 8], "x": 8.5, "y": 2.5}, + {"matrix": [2, 9], "x": 9.5, "y": 2.5}, + {"matrix": [2, 10], "x": 10.5, "y": 2.5}, + {"matrix": [2, 11], "x": 11.5, "y": 2.5}, + {"matrix": [2, 12], "x": 12.5, "y": 2.5}, + {"matrix": [2, 14], "x": 15.25, "y": 2.5}, + {"matrix": [2, 15], "x": 16.25, "y": 2.5}, + {"matrix": [2, 16], "x": 17.25, "y": 2.5}, + {"matrix": [3, 0], "x": 0, "y": 3.5, "w": 1.75}, + {"matrix": [3, 1], "x": 1.75, "y": 3.5}, + {"matrix": [3, 2], "x": 2.75, "y": 3.5}, + {"matrix": [3, 3], "x": 3.75, "y": 3.5}, + {"matrix": [3, 4], "x": 4.75, "y": 3.5}, + {"matrix": [3, 5], "x": 5.75, "y": 3.5}, + {"matrix": [3, 6], "x": 6.75, "y": 3.5}, + {"matrix": [3, 7], "x": 7.75, "y": 3.5}, + {"matrix": [3, 8], "x": 8.75, "y": 3.5}, + {"matrix": [3, 9], "x": 9.75, "y": 3.5}, + {"matrix": [3, 10], "x": 10.75, "y": 3.5}, + {"matrix": [3, 11], "x": 11.75, "y": 3.5}, + {"matrix": [3, 12], "x": 12.75, "y": 3.5}, + {"matrix": [2, 13], "x": 13.75, "y": 2.5, "w": 1.25, "h": 2}, + {"matrix": [4, 0], "x": 0, "y": 4.5, "w": 1.25}, + {"matrix": [4, 1], "x": 1.25, "y": 4.5}, + {"matrix": [4, 2], "x": 2.25, "y": 4.5}, + {"matrix": [4, 3], "x": 3.25, "y": 4.5}, + {"matrix": [4, 4], "x": 4.25, "y": 4.5}, + {"matrix": [4, 5], "x": 5.25, "y": 4.5}, + {"matrix": [4, 6], "x": 6.25, "y": 4.5}, + {"matrix": [4, 7], "x": 7.25, "y": 4.5}, + {"matrix": [4, 8], "x": 8.25, "y": 4.5}, + {"matrix": [4, 9], "x": 9.25, "y": 4.5}, + {"matrix": [4, 10], "x": 10.25, "y": 4.5}, + {"matrix": [4, 11], "x": 11.25, "y": 4.5}, + {"matrix": [4, 12], "x": 12.25, "y": 4.5, "w": 2.75}, + {"matrix": [4, 15], "x": 16.25, "y": 4.5}, + {"matrix": [5, 0], "x": 0, "y": 5.5, "w": 1.25}, + {"matrix": [5, 1], "x": 1.25, "y": 5.5, "w": 1.25}, + {"matrix": [5, 2], "x": 2.5, "y": 5.5, "w": 1.25}, + {"matrix": [5, 5], "x": 3.75, "y": 5.5, "w": 6.25}, + {"matrix": [5, 9], "x": 10, "y": 5.5, "w": 1.25}, + {"matrix": [5, 10], "x": 11.25, "y": 5.5, "w": 1.25}, + {"matrix": [5, 11], "x": 12.5, "y": 5.5, "w": 1.25}, + {"matrix": [5, 12], "x": 13.75, "y": 5.5, "w": 1.25}, + {"matrix": [5, 13], "x": 15.25, "y": 5.5}, + {"matrix": [5, 15], "x": 16.25, "y": 5.5}, + {"matrix": [5, 16], "x": 17.25, "y": 5.5} + ] + } + } +} diff --git a/keyboards/capsunlocked/cu80/v2/iso/config.h b/keyboards/capsunlocked/cu80/v2/iso/config.h new file mode 100644 index 0000000000..28086d6195 --- /dev/null +++ b/keyboards/capsunlocked/cu80/v2/iso/config.h @@ -0,0 +1,8 @@ +// Copyright 2021 CapsUnlocked +// SPDX-License-Identifier: GPL-2.0-or-later +#pragma once + +#ifdef RGB_MATRIX_ENABLE +# define RGB_MATRIX_LED_COUNT 88 +# define RGB_MATRIX_KEYPRESSES +#endif diff --git a/keyboards/capsunlocked/cu80/v2_iso/base/info.json b/keyboards/capsunlocked/cu80/v2/iso/info.json index 636e6e2276..33d49db64a 100644 --- a/keyboards/capsunlocked/cu80/v2_iso/base/info.json +++ b/keyboards/capsunlocked/cu80/v2/iso/info.json @@ -1,6 +1,6 @@ { "keyboard_name": "CU80 v2 ISO", "usb": { - "pid": "0x0080" + "pid": "0x0083" } } diff --git a/keyboards/capsunlocked/cu80/v2/iso/iso.c b/keyboards/capsunlocked/cu80/v2/iso/iso.c new file mode 100644 index 0000000000..cdc588160e --- /dev/null +++ b/keyboards/capsunlocked/cu80/v2/iso/iso.c @@ -0,0 +1,20 @@ +// Copyright 2021 CapsUnlocked +// SPDX-License-Identifier: GPL-2.0-or-later +#include "quantum.h" + +#ifdef RGB_MATRIX_ENABLE +led_config_t g_led_config = { + { + {0, NO_LED, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15}, + {32, 31, 30, 29, 28, 27, 26, 25, 24, 23, 22, 21, 20, 19, 18, 17, 16}, + {33, 34, 35, 36, 37, 38, 39, 40, 41, 42, 43, 44, 45, 46, 47, 48, 49}, + {62, 61, 60, 59, 58, 57, 56, 55, 54, 53, 52, 51, 50}, + {63, 64, 65, 66, 67, 68, 69, 70, 71, 72, 73, 74, 75, NO_LED, NO_LED, 76}, + {87, 86, 85, NO_LED, NO_LED, 84, NO_LED, NO_LED, NO_LED, 83, 82, 81, 80, 79, NO_LED, 78, 77} + }, { + {0, 0}, {28, 0}, {42, 0}, {56, 0}, {71, 0}, {85, 0}, {99, 0}, {113, 0}, {127, 0}, {141, 0}, {155, 0}, {169, 0}, {184, 0}, {198, 0}, {212, 0}, {226, 0}, {226, 26}, {212, 26}, {198, 26}, {184, 26}, {169, 26}, {155, 26}, {141, 26}, {127, 26}, {113, 26}, {99, 26}, {85, 26}, {71, 26}, {56, 26}, {42, 26}, {28, 26}, {14, 26}, {0, 26}, {0, 26}, {14, 26}, {28, 26}, {42, 26}, {56, 26}, {71, 26}, {85, 26}, {99, 26}, {113, 26}, {127, 26}, {141, 26}, {155, 26}, {169, 26}, {184, 26}, {198, 26}, {212, 26}, {226, 26}, {169, 38}, {155, 38}, {141, 38}, {127, 38}, {113, 38}, {99, 38}, {85, 38}, {71, 38}, {56, 38}, {42, 38}, {28, 38}, {14, 38}, {0, 38}, {0, 51}, {14, 51}, {28, 51}, {42, 51}, {56, 51}, {71, 51}, {85, 51}, {99, 51}, {113, 51}, {127, 51}, {141, 51}, {155, 51}, {169, 51}, {212, 51}, {226, 64}, {212, 64}, {184, 64}, {169, 64}, {155, 64}, {141, 64}, {127, 64}, {71, 64}, {28, 64}, {14, 64}, {0, 64} + }, { + 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 8, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 8, 1, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 1, 4, 4, 4, 4, 1, 1, 1, 1, 4, 1, 1, 1 + } +}; +#endif diff --git a/keyboards/capsunlocked/cu80/v2_iso/keymaps/default/keymap.c b/keyboards/capsunlocked/cu80/v2/iso/keymaps/default/keymap.c index d42f3533a4..cf5886f457 100644 --- a/keyboards/capsunlocked/cu80/v2_iso/keymaps/default/keymap.c +++ b/keyboards/capsunlocked/cu80/v2/iso/keymaps/default/keymap.c @@ -34,5 +34,5 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, NK_TOGG, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, RGB_RMOD,RGB_TOG, RGB_MOD - ), + ) }; diff --git a/keyboards/capsunlocked/cu80/v2_iso/keymaps/via/keymap.c b/keyboards/capsunlocked/cu80/v2/iso/keymaps/via/keymap.c index a72f451b3f..947a0bd97a 100644 --- a/keyboards/capsunlocked/cu80/v2_iso/keymaps/via/keymap.c +++ b/keyboards/capsunlocked/cu80/v2/iso/keymaps/via/keymap.c @@ -33,23 +33,5 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, NK_TOGG, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, RGB_RMOD,RGB_TOG, RGB_MOD - ), - [2] = LAYOUT_tkl_iso( - _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, - - _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, - _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, - _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, - _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, - _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______ - ), - [3] = LAYOUT_tkl_iso( - _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, - - _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, - _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, - _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, - _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, - _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______ - ), + ) }; diff --git a/keyboards/capsunlocked/cu80/v2_iso/keymaps/via/rules.mk b/keyboards/capsunlocked/cu80/v2/iso/keymaps/via/rules.mk index 1e5b99807c..1e5b99807c 100644 --- a/keyboards/capsunlocked/cu80/v2_iso/keymaps/via/rules.mk +++ b/keyboards/capsunlocked/cu80/v2/iso/keymaps/via/rules.mk diff --git a/keyboards/capsunlocked/cu80/v2/iso/rules.mk b/keyboards/capsunlocked/cu80/v2/iso/rules.mk new file mode 100644 index 0000000000..6e7633bfe0 --- /dev/null +++ b/keyboards/capsunlocked/cu80/v2/iso/rules.mk @@ -0,0 +1 @@ +# This file intentionally left blank diff --git a/keyboards/capsunlocked/cu80/v2/v2.c b/keyboards/capsunlocked/cu80/v2/v2.c new file mode 100644 index 0000000000..e450082ba2 --- /dev/null +++ b/keyboards/capsunlocked/cu80/v2/v2.c @@ -0,0 +1,23 @@ +// Copyright 2021 CapsUnlocked +// SPDX-License-Identifier: GPL-2.0-or-later +#include "quantum.h" + +void matrix_init_kb(void) { + setPinOutput(E6); + matrix_init_user(); +} + +#ifdef RGB_MATRIX_ENABLE +bool rgb_matrix_indicators_kb(void) { + if (!rgb_matrix_indicators_user()) { + return false; + } + if (host_keyboard_led_state().caps_lock) { + rgb_matrix_set_color(62, 255, 255, 255); + } + if (host_keyboard_led_state().scroll_lock) { + rgb_matrix_set_color(14, 255, 255, 255); + } + return true; +} +#endif diff --git a/keyboards/capsunlocked/cu80/v2_ansi/config.h b/keyboards/capsunlocked/cu80/v2_ansi/config.h deleted file mode 100644 index 3199b57da4..0000000000 --- a/keyboards/capsunlocked/cu80/v2_ansi/config.h +++ /dev/null @@ -1,36 +0,0 @@ -/* -Copyright 2021 CapsUnlocked - -This program is free software: you can redistribute it and/or modify -it under the terms of the GNU General Public License as published by -the Free Software Foundation, either version 2 of the License, or -(at your option) any later version. - -This program is distributed in the hope that it will be useful, -but WITHOUT ANY WARRANTY; without even the implied warranty of -MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -GNU General Public License for more details. - -You should have received a copy of the GNU General Public License -along with this program. If not, see <http://www.gnu.org/licenses/>. -*/ - -#pragma once - - -#define LOCKING_SUPPORT_ENABLE -/* Locking resynchronize hack */ -#define LOCKING_RESYNC_ENABLE - -/* Define RGB */ -#define RGB_MATRIX_LED_COUNT 87 -#define RGBLIGHT_EFFECT_BREATHING -#define RGBLIGHT_EFFECT_RAINBOW_MOOD -#define RGBLIGHT_EFFECT_RAINBOW_SWIRL -#define RGBLIGHT_EFFECT_SNAKE -#define RGBLIGHT_EFFECT_KNIGHT -#define RGBLIGHT_EFFECT_CHRISTMAS -#define RGBLIGHT_EFFECT_STATIC_GRADIENT -#define RGBLIGHT_EFFECT_RGB_TEST -#define RGBLIGHT_EFFECT_ALTERNATING -#define RGBLIGHT_EFFECT_TWINKLE diff --git a/keyboards/capsunlocked/cu80/v2_ansi/info.json b/keyboards/capsunlocked/cu80/v2_ansi/info.json deleted file mode 100644 index c9d4b88926..0000000000 --- a/keyboards/capsunlocked/cu80/v2_ansi/info.json +++ /dev/null @@ -1,161 +0,0 @@ -{ - "manufacturer": "CapsUnlocked", - "maintainer": "rys / maz0r", - "bootloader": "atmel-dfu", - "diode_direction": "COL2ROW", - "features": { - "audio": false, - "backlight": false, - "bluetooth": false, - "bootmagic": true, - "command": false, - "console": false, - "extrakey": true, - "mousekey": false, - "nkro": true, - "rgblight": true, - "sleep_led": false, - "unicode": false - }, - "matrix_pins": { - "cols": ["B0", "B1", "B2", "B3", "F4", "F5", "F6", "F7", "B6", "B5", "D7", "B4", "D6", "F0", "D1", "C6", "D4"], - "rows": ["D3", "D2", "B7", "F1", "C7", "D5"] - }, - "processor": "atmega32u4", - "rgblight": { - "animations": { - "alternating": false, - "breathing": false, - "christmas": false, - "knight": false, - "rainbow_mood": false, - "rainbow_swirl": false, - "rgb_test": false, - "snake": false, - "static_gradient": false, - "twinkle": false - }, - "brightness_steps": 8, - "hue_steps": 8, - "led_count": 87, - "max_brightness": 50, - "saturation_steps": 8 - }, - "ws2812": { - "pin": "E6" - }, - "url": "https://caps-unlocked.com/cu80-round-2/", - "usb": { - "device_version": "0.0.1", - "vid": "0x4355" - }, - "community_layouts": ["tkl_ansi"], - "layouts": { - "LAYOUT_tkl_ansi": { - "c_macro": true, - "filename": "keyboards/capsunlocked/cu80/v2_ansi/v2_ansi.h", - "layout": [ - {"matrix": [0, 0], "x": 0, "y": 0}, - - {"matrix": [0, 2], "x": 2, "y": 0}, - {"matrix": [0, 3], "x": 3, "y": 0}, - {"matrix": [0, 4], "x": 4, "y": 0}, - {"matrix": [0, 5], "x": 5, "y": 0}, - - {"matrix": [0, 6], "x": 6.5, "y": 0}, - {"matrix": [0, 7], "x": 7.5, "y": 0}, - {"matrix": [0, 8], "x": 8.5, "y": 0}, - {"matrix": [0, 9], "x": 9.5, "y": 0}, - - {"matrix": [0, 10], "x": 11, "y": 0}, - {"matrix": [0, 11], "x": 12, "y": 0}, - {"matrix": [0, 12], "x": 13, "y": 0}, - {"matrix": [0, 13], "x": 14, "y": 0}, - - {"matrix": [0, 14], "x": 15.25, "y": 0}, - {"matrix": [0, 15], "x": 16.25, "y": 0}, - {"matrix": [0, 16], "x": 17.25, "y": 0}, - - {"matrix": [1, 0], "x": 0, "y": 1.5}, - {"matrix": [1, 1], "x": 1, "y": 1.5}, - {"matrix": [1, 2], "x": 2, "y": 1.5}, - {"matrix": [1, 3], "x": 3, "y": 1.5}, - {"matrix": [1, 4], "x": 4, "y": 1.5}, - {"matrix": [1, 5], "x": 5, "y": 1.5}, - {"matrix": [1, 6], "x": 6, "y": 1.5}, - {"matrix": [1, 7], "x": 7, "y": 1.5}, - {"matrix": [1, 8], "x": 8, "y": 1.5}, - {"matrix": [1, 9], "x": 9, "y": 1.5}, - {"matrix": [1, 10], "x": 10, "y": 1.5}, - {"matrix": [1, 11], "x": 11, "y": 1.5}, - {"matrix": [1, 12], "x": 12, "y": 1.5}, - {"matrix": [1, 13], "x": 13, "y": 1.5, "w": 2}, - - {"matrix": [1, 14], "x": 15.25, "y": 1.5}, - {"matrix": [1, 15], "x": 16.25, "y": 1.5}, - {"matrix": [1, 16], "x": 17.25, "y": 1.5}, - - {"matrix": [2, 0], "x": 0, "y": 2.5, "w": 1.5}, - {"matrix": [2, 1], "x": 1.5, "y": 2.5}, - {"matrix": [2, 2], "x": 2.5, "y": 2.5}, - {"matrix": [2, 3], "x": 3.5, "y": 2.5}, - {"matrix": [2, 4], "x": 4.5, "y": 2.5}, - {"matrix": [2, 5], "x": 5.5, "y": 2.5}, - {"matrix": [2, 6], "x": 6.5, "y": 2.5}, - {"matrix": [2, 7], "x": 7.5, "y": 2.5}, - {"matrix": [2, 8], "x": 8.5, "y": 2.5}, - {"matrix": [2, 9], "x": 9.5, "y": 2.5}, - {"matrix": [2, 10], "x": 10.5, "y": 2.5}, - {"matrix": [2, 11], "x": 11.5, "y": 2.5}, - {"matrix": [2, 12], "x": 12.5, "y": 2.5}, - {"matrix": [2, 13], "x": 13.5, "y": 2.5, "w": 1.5}, - - {"matrix": [2, 14], "x": 15.25, "y": 2.5}, - {"matrix": [2, 15], "x": 16.25, "y": 2.5}, - {"matrix": [2, 16], "x": 17.25, "y": 2.5}, - - {"matrix": [3, 0], "x": 0, "y": 3.5, "w": 1.75}, - {"matrix": [3, 1], "x": 1.75, "y": 3.5}, - {"matrix": [3, 2], "x": 2.75, "y": 3.5}, - {"matrix": [3, 3], "x": 3.75, "y": 3.5}, - {"matrix": [3, 4], "x": 4.75, "y": 3.5}, - {"matrix": [3, 5], "x": 5.75, "y": 3.5}, - {"matrix": [3, 6], "x": 6.75, "y": 3.5}, - {"matrix": [3, 7], "x": 7.75, "y": 3.5}, - {"matrix": [3, 8], "x": 8.75, "y": 3.5}, - {"matrix": [3, 9], "x": 9.75, "y": 3.5}, - {"matrix": [3, 10], "x": 10.75, "y": 3.5}, - {"matrix": [3, 11], "x": 11.75, "y": 3.5}, - {"matrix": [3, 12], "x": 12.75, "y": 3.5, "w": 2.25}, - - {"matrix": [4, 0], "x": 0, "y": 4.5, "w": 2.25}, - {"matrix": [4, 2], "x": 2.25, "y": 4.5}, - {"matrix": [4, 3], "x": 3.25, "y": 4.5}, - {"matrix": [4, 4], "x": 4.25, "y": 4.5}, - {"matrix": [4, 5], "x": 5.25, "y": 4.5}, - {"matrix": [4, 6], "x": 6.25, "y": 4.5}, - {"matrix": [4, 7], "x": 7.25, "y": 4.5}, - {"matrix": [4, 8], "x": 8.25, "y": 4.5}, - {"matrix": [4, 9], "x": 9.25, "y": 4.5}, - {"matrix": [4, 10], "x": 10.25, "y": 4.5}, - {"matrix": [4, 11], "x": 11.25, "y": 4.5}, - {"matrix": [4, 12], "x": 12.25, "y": 4.5, "w": 2.75}, - - {"matrix": [4, 15], "x": 16.25, "y": 4.5}, - - {"matrix": [5, 0], "x": 0, "y": 5.5, "w": 1.25}, - {"matrix": [5, 1], "x": 1.25, "y": 5.5, "w": 1.25}, - {"matrix": [5, 2], "x": 2.5, "y": 5.5, "w": 1.25}, - {"matrix": [5, 5], "x": 3.75, "y": 5.5, "w": 6.25}, - {"matrix": [5, 9], "x": 10, "y": 5.5, "w": 1.25}, - {"matrix": [5, 10], "x": 11.25, "y": 5.5, "w": 1.25}, - {"matrix": [5, 11], "x": 12.5, "y": 5.5, "w": 1.25}, - {"matrix": [5, 12], "x": 13.75, "y": 5.5, "w": 1.25}, - - {"matrix": [5, 13], "x": 15.25, "y": 5.5}, - {"matrix": [5, 15], "x": 16.25, "y": 5.5}, - {"matrix": [5, 16], "x": 17.25, "y": 5.5} - ] - } - } -} diff --git a/keyboards/capsunlocked/cu80/v2_ansi/keymaps/default/readme.md b/keyboards/capsunlocked/cu80/v2_ansi/keymaps/default/readme.md deleted file mode 100644 index 717c2c283a..0000000000 --- a/keyboards/capsunlocked/cu80/v2_ansi/keymaps/default/readme.md +++ /dev/null @@ -1,3 +0,0 @@ -# The default ANSI keymap for the CU80 - -This CU80 is keymap is for the fixed ANSI variant with fully populated bottom row. diff --git a/keyboards/capsunlocked/cu80/v2_ansi/readme.md b/keyboards/capsunlocked/cu80/v2_ansi/readme.md deleted file mode 100644 index 4768917fc8..0000000000 --- a/keyboards/capsunlocked/cu80/v2_ansi/readme.md +++ /dev/null @@ -1,16 +0,0 @@ -# CU80 v2 ANSI - -The CU80 v2 ANSI is the PCB for round 2 of the CU80 TKL keyboard, with fixed layout ANSI and VIA support. - -To place the keyboard into bootloader mode in order to flash it, hold the ESC key while plugging the board in, or use the reset button on the back of the PCB. - -* Keyboard maintainer: [rys](https://github.com/rys) & [maz0r](https://github.com/maz0r) -* Hardware supported: [CU80 v2 ANSI](https://imgur.com/gOWpJqe) -* Hardware availability: [CapsUnlocked](https://caps-unlocked.com/cu80-round-2/) - -Make and flash example for this keyboard (after setting up your build environment): - - make capsunlocked/cu80/v2_ansi:default:flash - make capsunlocked/cu80/v2_ansi/rgb:default:flash - -See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). diff --git a/keyboards/capsunlocked/cu80/v2_ansi/rgb/config.h b/keyboards/capsunlocked/cu80/v2_ansi/rgb/config.h deleted file mode 100644 index 48a12c0cdc..0000000000 --- a/keyboards/capsunlocked/cu80/v2_ansi/rgb/config.h +++ /dev/null @@ -1,77 +0,0 @@ -/* -Copyright 2021 CapsUnlocked - -This program is free software: you can redistribute it and/or modify -it under the terms of the GNU General Public License as published by -the Free Software Foundation, either version 2 of the License, or -(at your option) any later version. - -This program is distributed in the hope that it will be useful, -but WITHOUT ANY WARRANTY; without even the implied warranty of -MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -GNU General Public License for more details. - -You should have received a copy of the GNU General Public License -along with this program. If not, see <http://www.gnu.org/licenses/>. -*/ -#pragma once - -/* enable RGB matrix */ -#define CU80_RGB - -/* moved to RGB specific */ -#define RGB_MATRIX_KEYPRESSES -#define RGB_MATRIX_MAXIMUM_BRIGHTNESS 50 -// RGB Matrix Animation modes. Explicitly enabled -// For full list of effects, see: -// https://docs.qmk.fm/#/feature_rgb_matrix?id=rgb-matrix-effects -#define ENABLE_RGB_MATRIX_ALPHAS_MODS -#define ENABLE_RGB_MATRIX_GRADIENT_UP_DOWN -#define ENABLE_RGB_MATRIX_GRADIENT_LEFT_RIGHT -#define ENABLE_RGB_MATRIX_BREATHING -#define ENABLE_RGB_MATRIX_BAND_SAT -#define ENABLE_RGB_MATRIX_BAND_VAL -#define ENABLE_RGB_MATRIX_BAND_PINWHEEL_SAT -#define ENABLE_RGB_MATRIX_BAND_PINWHEEL_VAL -#define ENABLE_RGB_MATRIX_BAND_SPIRAL_SAT -#define ENABLE_RGB_MATRIX_BAND_SPIRAL_VAL -#define ENABLE_RGB_MATRIX_CYCLE_ALL -#define ENABLE_RGB_MATRIX_CYCLE_LEFT_RIGHT -#define ENABLE_RGB_MATRIX_CYCLE_UP_DOWN -#define ENABLE_RGB_MATRIX_RAINBOW_MOVING_CHEVRON -#define ENABLE_RGB_MATRIX_CYCLE_OUT_IN -#define ENABLE_RGB_MATRIX_CYCLE_OUT_IN_DUAL -#define ENABLE_RGB_MATRIX_CYCLE_PINWHEEL -#define ENABLE_RGB_MATRIX_CYCLE_SPIRAL -#define ENABLE_RGB_MATRIX_DUAL_BEACON -#define ENABLE_RGB_MATRIX_RAINBOW_BEACON -#define ENABLE_RGB_MATRIX_RAINBOW_PINWHEELS -#define ENABLE_RGB_MATRIX_RAINDROPS -#define ENABLE_RGB_MATRIX_JELLYBEAN_RAINDROPS -#define ENABLE_RGB_MATRIX_HUE_BREATHING -#define ENABLE_RGB_MATRIX_HUE_PENDULUM -#define ENABLE_RGB_MATRIX_HUE_WAVE -#define ENABLE_RGB_MATRIX_PIXEL_RAIN -#define ENABLE_RGB_MATRIX_PIXEL_FLOW -#define ENABLE_RGB_MATRIX_PIXEL_FRACTAL -// enabled only if RGB_MATRIX_FRAMEBUFFER_EFFECTS is defined -#define ENABLE_RGB_MATRIX_TYPING_HEATMAP -#define ENABLE_RGB_MATRIX_DIGITAL_RAIN -// enabled only of RGB_MATRIX_KEYPRESSES or RGB_MATRIX_KEYRELEASES is defined -#define ENABLE_RGB_MATRIX_SOLID_REACTIVE_SIMPLE -#define ENABLE_RGB_MATRIX_SOLID_REACTIVE -#define ENABLE_RGB_MATRIX_SOLID_REACTIVE_WIDE -#define ENABLE_RGB_MATRIX_SOLID_REACTIVE_MULTIWIDE -#define ENABLE_RGB_MATRIX_SOLID_REACTIVE_CROSS -#define ENABLE_RGB_MATRIX_SOLID_REACTIVE_MULTICROSS -#define ENABLE_RGB_MATRIX_SOLID_REACTIVE_NEXUS -#define ENABLE_RGB_MATRIX_SOLID_REACTIVE_MULTINEXUS -#define ENABLE_RGB_MATRIX_SPLASH -#define ENABLE_RGB_MATRIX_MULTISPLASH -#define ENABLE_RGB_MATRIX_SOLID_SPLASH -#define ENABLE_RGB_MATRIX_SOLID_MULTISPLASH - -/* RGB firmware override */ -#undef RGBLIGHT_HUE_STEP -#undef RGBLIGHT_SAT_STEP -#undef RGBLIGHT_VAL_STEP diff --git a/keyboards/capsunlocked/cu80/v2_ansi/rgb/info.json b/keyboards/capsunlocked/cu80/v2_ansi/rgb/info.json deleted file mode 100644 index 45b4b9c8cd..0000000000 --- a/keyboards/capsunlocked/cu80/v2_ansi/rgb/info.json +++ /dev/null @@ -1,12 +0,0 @@ -{ - "keyboard_name": "CU80 v2 ANSI RGB", - "features": { - "rgblight": false - }, - "rgb_matrix": { - "driver": "WS2812" - }, - "usb": { - "pid": "0x0082" - } -} diff --git a/keyboards/capsunlocked/cu80/v2_ansi/rgb/readme.md b/keyboards/capsunlocked/cu80/v2_ansi/rgb/readme.md deleted file mode 100644 index 0919483592..0000000000 --- a/keyboards/capsunlocked/cu80/v2_ansi/rgb/readme.md +++ /dev/null @@ -1,3 +0,0 @@ -# CU80 v2 ANSI RGB - -Overrides
\ No newline at end of file diff --git a/keyboards/capsunlocked/cu80/v2_ansi/rgb/rules.mk b/keyboards/capsunlocked/cu80/v2_ansi/rgb/rules.mk deleted file mode 100644 index 9470477f49..0000000000 --- a/keyboards/capsunlocked/cu80/v2_ansi/rgb/rules.mk +++ /dev/null @@ -1,3 +0,0 @@ -RGB_MATRIX_ENABLE = yes # Enable RGB matrix - -LTO_ENABLE = yes diff --git a/keyboards/capsunlocked/cu80/v2_ansi/rules.mk b/keyboards/capsunlocked/cu80/v2_ansi/rules.mk deleted file mode 100644 index e96dd72928..0000000000 --- a/keyboards/capsunlocked/cu80/v2_ansi/rules.mk +++ /dev/null @@ -1,3 +0,0 @@ -NO_USB_STARTUP_CHECK = yes # resolve possible sleep issue - -DEFAULT_FOLDER = capsunlocked/cu80/v2_ansi/base diff --git a/keyboards/capsunlocked/cu80/v2_ansi/v2_ansi.c b/keyboards/capsunlocked/cu80/v2_ansi/v2_ansi.c deleted file mode 100644 index f014479ef8..0000000000 --- a/keyboards/capsunlocked/cu80/v2_ansi/v2_ansi.c +++ /dev/null @@ -1,52 +0,0 @@ -/* -Copyright 2021 CapsUnlocked - -This program is free software: you can redistribute it and/or modify -it under the terms of the GNU General Public License as published by -the Free Software Foundation, either version 2 of the License, or -(at your option) any later version. - -This program is distributed in the hope that it will be useful, -but WITHOUT ANY WARRANTY; without even the implied warranty of -MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -GNU General Public License for more details. - -You should have received a copy of the GNU General Public License -along with this program. If not, see <http://www.gnu.org/licenses/>. -*/ - -#include "quantum.h" - -#ifdef CU80_RGB - -void matrix_init_kb(void) { - setPinOutput(E6); - matrix_init_user(); -} - -/* Set LED 62 (Caps Lock) and LED 14 (Scroll Lock) when key active */ -bool rgb_matrix_indicators_kb(void) { - if (!rgb_matrix_indicators_user()) { - return false; - } - if (host_keyboard_led_state().caps_lock) { - rgb_matrix_set_color(62, 255, 255, 255); - } - if (host_keyboard_led_state().scroll_lock) { - rgb_matrix_set_color(14, 255, 255, 255); - } - return true; -} - -/* Leds on the CU80 go ltr > rtl > ltr > rlt > Ltr > rtl */ -led_config_t g_led_config = {{{0, NO_LED, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15}, {32, 31, 30, 29, 28, 27, 26, 25, 24, 23, 22, 21, 20, 19, 18, 17, 16}, {33, 34, 35, 36, 37, 38, 39, 40, 41, 42, 43, 44, 45, 46, 47, 48, 49}, {62, 61, 60, 59, 58, 57, 56, 55, 54, 53, 52, 51, 50}, {63, NO_LED, 64, 65, 66, 67, 68, 69, 70, 71, 72, 73, 74, NO_LED, NO_LED, 75}, {86, 85, 84, NO_LED, NO_LED, 83, NO_LED, NO_LED, NO_LED, 82, 81, 80, 79, 78, NO_LED, 77, 76} - - }, - /*board layout accounting for led directions */ - {{0, 0}, {28, 0}, {42, 0}, {56, 0}, {71, 0}, {85, 0}, {99, 0}, {113, 0}, {127, 0}, {141, 0}, {155, 0}, {169, 0}, {184, 0}, {198, 0}, {212, 0}, {226, 0}, {226, 13}, {212, 13}, {198, 13}, {184, 13}, {169, 13}, {155, 13}, {141, 13}, {127, 13}, {113, 13}, {99, 13}, {85, 13}, {71, 13}, {56, 13}, {42, 13}, {28, 13}, {14, 13}, {0, 13}, {0, 26}, {14, 26}, {28, 26}, {42, 26}, {56, 26}, {71, 26}, {85, 26}, {99, 26}, {113, 26}, {127, 26}, {141, 26}, - {155, 26}, {169, 26}, {184, 26}, {198, 26}, {212, 26}, {226, 26}, {169, 38}, {155, 38}, {141, 38}, {127, 38}, {113, 38}, {99, 38}, {85, 38}, {71, 38}, {56, 38}, {42, 38}, {28, 38}, {14, 38}, {0, 38}, {0, 51}, {28, 51}, {42, 51}, {56, 51}, {71, 51}, {85, 51}, {99, 51}, {113, 51}, {127, 51}, {141, 51}, {155, 51}, {169, 51}, {212, 51}, {226, 64}, {212, 64}, {184, 64}, {169, 64}, {155, 64}, {141, 64}, {127, 64}, {71, 64}, {28, 64}, {14, 64}, {0, 64} - - }, - /* marks scroll and caps as function modifiers for led effects */ - {4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 8, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 8, 1, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 1, 4, 4, 4, 4, 1, 1, 1, 1, 4, 1, 1, 1}}; -#endif diff --git a/keyboards/capsunlocked/cu80/v2_iso/config.h b/keyboards/capsunlocked/cu80/v2_iso/config.h deleted file mode 100644 index 167bf871f1..0000000000 --- a/keyboards/capsunlocked/cu80/v2_iso/config.h +++ /dev/null @@ -1,37 +0,0 @@ -/* -Copyright 2021 CapsUnlocked - -This program is free software: you can redistribute it and/or modify -it under the terms of the GNU General Public License as published by -the Free Software Foundation, either version 2 of the License, or -(at your option) any later version. - -This program is distributed in the hope that it will be useful, -but WITHOUT ANY WARRANTY; without even the implied warranty of -MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -GNU General Public License for more details. - -You should have received a copy of the GNU General Public License -along with this program. If not, see <http://www.gnu.org/licenses/>. -*/ - -#pragma once - - - -#define LOCKING_SUPPORT_ENABLE -/* Locking resynchronize hack */ -#define LOCKING_RESYNC_ENABLE - -/* Define RGB */ -#define RGB_MATRIX_LED_COUNT 88 -#define RGBLIGHT_EFFECT_BREATHING -#define RGBLIGHT_EFFECT_RAINBOW_MOOD -#define RGBLIGHT_EFFECT_RAINBOW_SWIRL -#define RGBLIGHT_EFFECT_SNAKE -#define RGBLIGHT_EFFECT_KNIGHT -#define RGBLIGHT_EFFECT_CHRISTMAS -#define RGBLIGHT_EFFECT_STATIC_GRADIENT -#define RGBLIGHT_EFFECT_RGB_TEST -#define RGBLIGHT_EFFECT_ALTERNATING -#define RGBLIGHT_EFFECT_TWINKLE diff --git a/keyboards/capsunlocked/cu80/v2_iso/info.json b/keyboards/capsunlocked/cu80/v2_iso/info.json deleted file mode 100644 index b7225214ba..0000000000 --- a/keyboards/capsunlocked/cu80/v2_iso/info.json +++ /dev/null @@ -1,162 +0,0 @@ -{ - "manufacturer": "CapsUnlocked", - "maintainer": "rys / maz0r", - "bootloader": "atmel-dfu", - "diode_direction": "COL2ROW", - "features": { - "audio": false, - "backlight": false, - "bluetooth": false, - "bootmagic": true, - "command": false, - "console": false, - "extrakey": true, - "mousekey": false, - "nkro": true, - "rgblight": true, - "sleep_led": false, - "unicode": false - }, - "matrix_pins": { - "cols": ["B0", "B1", "B2", "B3", "F4", "F5", "F6", "F7", "B6", "B5", "D7", "B4", "D6", "F0", "D1", "C6", "D4"], - "rows": ["D3", "D2", "B7", "F1", "C7", "D5"] - }, - "processor": "atmega32u4", - "rgblight": { - "animations": { - "alternating": false, - "breathing": false, - "christmas": false, - "knight": false, - "rainbow_mood": false, - "rainbow_swirl": false, - "rgb_test": false, - "snake": false, - "static_gradient": false, - "twinkle": false - }, - "brightness_steps": 8, - "hue_steps": 8, - "led_count": 88, - "max_brightness": 50, - "saturation_steps": 8 - }, - "ws2812": { - "pin": "E6" - }, - "url": "https://caps-unlocked.com/cu80-round-2/", - "usb": { - "device_version": "0.0.1", - "vid": "0x4355" - }, - "community_layouts": ["tkl_iso"], - "layouts": { - "LAYOUT_tkl_iso": { - "c_macro": true, - "filename": "keyboards/capsunlocked/cu80/v2_iso/v2_iso.h", - "layout": [ - {"matrix": [0, 0], "x": 0, "y": 0}, - - {"matrix": [0, 2], "x": 2, "y": 0}, - {"matrix": [0, 3], "x": 3, "y": 0}, - {"matrix": [0, 4], "x": 4, "y": 0}, - {"matrix": [0, 5], "x": 5, "y": 0}, - - {"matrix": [0, 6], "x": 6.5, "y": 0}, - {"matrix": [0, 7], "x": 7.5, "y": 0}, - {"matrix": [0, 8], "x": 8.5, "y": 0}, - {"matrix": [0, 9], "x": 9.5, "y": 0}, - - {"matrix": [0, 10], "x": 11, "y": 0}, - {"matrix": [0, 11], "x": 12, "y": 0}, - {"matrix": [0, 12], "x": 13, "y": 0}, - {"matrix": [0, 13], "x": 14, "y": 0}, - - {"matrix": [0, 14], "x": 15.25, "y": 0}, - {"matrix": [0, 15], "x": 16.25, "y": 0}, - {"matrix": [0, 16], "x": 17.25, "y": 0}, - - {"matrix": [1, 0], "x": 0, "y": 1.5}, - {"matrix": [1, 1], "x": 1, "y": 1.5}, - {"matrix": [1, 2], "x": 2, "y": 1.5}, - {"matrix": [1, 3], "x": 3, "y": 1.5}, - {"matrix": [1, 4], "x": 4, "y": 1.5}, - {"matrix": [1, 5], "x": 5, "y": 1.5}, - {"matrix": [1, 6], "x": 6, "y": 1.5}, - {"matrix": [1, 7], "x": 7, "y": 1.5}, - {"matrix": [1, 8], "x": 8, "y": 1.5}, - {"matrix": [1, 9], "x": 9, "y": 1.5}, - {"matrix": [1, 10], "x": 10, "y": 1.5}, - {"matrix": [1, 11], "x": 11, "y": 1.5}, - {"matrix": [1, 12], "x": 12, "y": 1.5}, - {"matrix": [1, 13], "x": 13, "y": 1.5, "w": 2}, - - {"matrix": [1, 14], "x": 15.25, "y": 1.5}, - {"matrix": [1, 15], "x": 16.25, "y": 1.5}, - {"matrix": [1, 16], "x": 17.25, "y": 1.5}, - - {"matrix": [2, 0], "x": 0, "y": 2.5, "w": 1.5}, - {"matrix": [2, 1], "x": 1.5, "y": 2.5}, - {"matrix": [2, 2], "x": 2.5, "y": 2.5}, - {"matrix": [2, 3], "x": 3.5, "y": 2.5}, - {"matrix": [2, 4], "x": 4.5, "y": 2.5}, - {"matrix": [2, 5], "x": 5.5, "y": 2.5}, - {"matrix": [2, 6], "x": 6.5, "y": 2.5}, - {"matrix": [2, 7], "x": 7.5, "y": 2.5}, - {"matrix": [2, 8], "x": 8.5, "y": 2.5}, - {"matrix": [2, 9], "x": 9.5, "y": 2.5}, - {"matrix": [2, 10], "x": 10.5, "y": 2.5}, - {"matrix": [2, 11], "x": 11.5, "y": 2.5}, - {"matrix": [2, 12], "x": 12.5, "y": 2.5}, - - {"matrix": [2, 14], "x": 15.25, "y": 2.5}, - {"matrix": [2, 15], "x": 16.25, "y": 2.5}, - {"matrix": [2, 16], "x": 17.25, "y": 2.5}, - - {"matrix": [3, 0], "x": 0, "y": 3.5, "w": 1.75}, - {"matrix": [3, 1], "x": 1.75, "y": 3.5}, - {"matrix": [3, 2], "x": 2.75, "y": 3.5}, - {"matrix": [3, 3], "x": 3.75, "y": 3.5}, - {"matrix": [3, 4], "x": 4.75, "y": 3.5}, - {"matrix": [3, 5], "x": 5.75, "y": 3.5}, - {"matrix": [3, 6], "x": 6.75, "y": 3.5}, - {"matrix": [3, 7], "x": 7.75, "y": 3.5}, - {"matrix": [3, 8], "x": 8.75, "y": 3.5}, - {"matrix": [3, 9], "x": 9.75, "y": 3.5}, - {"matrix": [3, 10], "x": 10.75, "y": 3.5}, - {"matrix": [3, 11], "x": 11.75, "y": 3.5}, - {"matrix": [3, 12], "x": 12.75, "y": 3.5}, - {"matrix": [2, 13], "x": 13.75, "y": 2.5, "w": 1.25, "h": 2}, - - {"matrix": [4, 0], "x": 0, "y": 4.5, "w": 1.25}, - {"matrix": [4, 1], "x": 1.25, "y": 4.5}, - {"matrix": [4, 2], "x": 2.25, "y": 4.5}, - {"matrix": [4, 3], "x": 3.25, "y": 4.5}, - {"matrix": [4, 4], "x": 4.25, "y": 4.5}, - {"matrix": [4, 5], "x": 5.25, "y": 4.5}, - {"matrix": [4, 6], "x": 6.25, "y": 4.5}, - {"matrix": [4, 7], "x": 7.25, "y": 4.5}, - {"matrix": [4, 8], "x": 8.25, "y": 4.5}, - {"matrix": [4, 9], "x": 9.25, "y": 4.5}, - {"matrix": [4, 10], "x": 10.25, "y": 4.5}, - {"matrix": [4, 11], "x": 11.25, "y": 4.5}, - {"matrix": [4, 12], "x": 12.25, "y": 4.5, "w": 2.75}, - - {"matrix": [4, 15], "x": 16.25, "y": 4.5}, - - {"matrix": [5, 0], "x": 0, "y": 5.5, "w": 1.25}, - {"matrix": [5, 1], "x": 1.25, "y": 5.5, "w": 1.25}, - {"matrix": [5, 2], "x": 2.5, "y": 5.5, "w": 1.25}, - {"matrix": [5, 5], "x": 3.75, "y": 5.5, "w": 6.25}, - {"matrix": [5, 9], "x": 10, "y": 5.5, "w": 1.25}, - {"matrix": [5, 10], "x": 11.25, "y": 5.5, "w": 1.25}, - {"matrix": [5, 11], "x": 12.5, "y": 5.5, "w": 1.25}, - {"matrix": [5, 12], "x": 13.75, "y": 5.5, "w": 1.25}, - - {"matrix": [5, 13], "x": 15.25, "y": 5.5}, - {"matrix": [5, 15], "x": 16.25, "y": 5.5}, - {"matrix": [5, 16], "x": 17.25, "y": 5.5} - ] - } - } -} diff --git a/keyboards/capsunlocked/cu80/v2_iso/keymaps/default/readme.md b/keyboards/capsunlocked/cu80/v2_iso/keymaps/default/readme.md deleted file mode 100644 index bf55002afe..0000000000 --- a/keyboards/capsunlocked/cu80/v2_iso/keymaps/default/readme.md +++ /dev/null @@ -1,3 +0,0 @@ -# The default ISO keymap for the CU80 - -This CU80 is keymap is for the fixed ISO variant with fully populated bottom row. diff --git a/keyboards/capsunlocked/cu80/v2_iso/readme.md b/keyboards/capsunlocked/cu80/v2_iso/readme.md deleted file mode 100644 index cf8c5fc6fa..0000000000 --- a/keyboards/capsunlocked/cu80/v2_iso/readme.md +++ /dev/null @@ -1,16 +0,0 @@ -# CU80 v2 ISO - -The CU80 v2 ISO is the PCB for round 2 of the CU80 TKL keyboard, with fixed layout ISO and VIA support. - -To place the keyboard into bootloader mode in order to flash it, hold the ESC key while plugging the board in, or use the reset button on the back of the PCB. - -* Keyboard maintainer: [rys](https://github.com/rys) & [maz0r](https://github.com/maz0r) -* Hardware supported: [CU80 v2 ISO](https://imgur.com/yMZMt6j) -* Hardware availability: [CapsUnlocked](https://caps-unlocked.com/cu80-round-2/) - -Make and flash example for this keyboard (after setting up your build environment): - - make capsunlocked/cu80/v2_iso:default:flash - make capsunlocked/cu80/v2_iso/rgb:default:flash - -See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). diff --git a/keyboards/capsunlocked/cu80/v2_iso/rgb/config.h b/keyboards/capsunlocked/cu80/v2_iso/rgb/config.h deleted file mode 100644 index db6ab832b4..0000000000 --- a/keyboards/capsunlocked/cu80/v2_iso/rgb/config.h +++ /dev/null @@ -1,78 +0,0 @@ -/* -Copyright 2021 CapsUnlocked - -This program is free software: you can redistribute it and/or modify -it under the terms of the GNU General Public License as published by -the Free Software Foundation, either version 2 of the License, or -(at your option) any later version. - -This program is distributed in the hope that it will be useful, -but WITHOUT ANY WARRANTY; without even the implied warranty of -MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -GNU General Public License for more details. - -You should have received a copy of the GNU General Public License -along with this program. If not, see <http://www.gnu.org/licenses/>. -*/ - -#pragma once - -/* enable RGB matrix */ -#define CU80_RGB - -/* moved to RGB specific */ -#define RGB_MATRIX_KEYPRESSES -#define RGB_MATRIX_MAXIMUM_BRIGHTNESS 50 -// RGB Matrix Animation modes. Explicitly enabled -// For full list of effects, see: -// https://docs.qmk.fm/#/feature_rgb_matrix?id=rgb-matrix-effects -#define ENABLE_RGB_MATRIX_ALPHAS_MODS -#define ENABLE_RGB_MATRIX_GRADIENT_UP_DOWN -#define ENABLE_RGB_MATRIX_GRADIENT_LEFT_RIGHT -#define ENABLE_RGB_MATRIX_BREATHING -#define ENABLE_RGB_MATRIX_BAND_SAT -#define ENABLE_RGB_MATRIX_BAND_VAL -#define ENABLE_RGB_MATRIX_BAND_PINWHEEL_SAT -#define ENABLE_RGB_MATRIX_BAND_PINWHEEL_VAL -#define ENABLE_RGB_MATRIX_BAND_SPIRAL_SAT -#define ENABLE_RGB_MATRIX_BAND_SPIRAL_VAL -#define ENABLE_RGB_MATRIX_CYCLE_ALL -#define ENABLE_RGB_MATRIX_CYCLE_LEFT_RIGHT -#define ENABLE_RGB_MATRIX_CYCLE_UP_DOWN -#define ENABLE_RGB_MATRIX_RAINBOW_MOVING_CHEVRON -#define ENABLE_RGB_MATRIX_CYCLE_OUT_IN -#define ENABLE_RGB_MATRIX_CYCLE_OUT_IN_DUAL -#define ENABLE_RGB_MATRIX_CYCLE_PINWHEEL -#define ENABLE_RGB_MATRIX_CYCLE_SPIRAL -#define ENABLE_RGB_MATRIX_DUAL_BEACON -#define ENABLE_RGB_MATRIX_RAINBOW_BEACON -#define ENABLE_RGB_MATRIX_RAINBOW_PINWHEELS -#define ENABLE_RGB_MATRIX_RAINDROPS -#define ENABLE_RGB_MATRIX_JELLYBEAN_RAINDROPS -#define ENABLE_RGB_MATRIX_HUE_BREATHING -#define ENABLE_RGB_MATRIX_HUE_PENDULUM -#define ENABLE_RGB_MATRIX_HUE_WAVE -#define ENABLE_RGB_MATRIX_PIXEL_RAIN -#define ENABLE_RGB_MATRIX_PIXEL_FLOW -#define ENABLE_RGB_MATRIX_PIXEL_FRACTAL -// enabled only if RGB_MATRIX_FRAMEBUFFER_EFFECTS is defined -#define ENABLE_RGB_MATRIX_TYPING_HEATMAP -#define ENABLE_RGB_MATRIX_DIGITAL_RAIN -// enabled only of RGB_MATRIX_KEYPRESSES or RGB_MATRIX_KEYRELEASES is defined -#define ENABLE_RGB_MATRIX_SOLID_REACTIVE_SIMPLE -#define ENABLE_RGB_MATRIX_SOLID_REACTIVE -#define ENABLE_RGB_MATRIX_SOLID_REACTIVE_WIDE -#define ENABLE_RGB_MATRIX_SOLID_REACTIVE_MULTIWIDE -#define ENABLE_RGB_MATRIX_SOLID_REACTIVE_CROSS -#define ENABLE_RGB_MATRIX_SOLID_REACTIVE_MULTICROSS -#define ENABLE_RGB_MATRIX_SOLID_REACTIVE_NEXUS -#define ENABLE_RGB_MATRIX_SOLID_REACTIVE_MULTINEXUS -#define ENABLE_RGB_MATRIX_SPLASH -#define ENABLE_RGB_MATRIX_MULTISPLASH -#define ENABLE_RGB_MATRIX_SOLID_SPLASH -#define ENABLE_RGB_MATRIX_SOLID_MULTISPLASH - -/* RGB firmware override */ -#undef RGBLIGHT_HUE_STEP -#undef RGBLIGHT_SAT_STEP -#undef RGBLIGHT_VAL_STEP diff --git a/keyboards/capsunlocked/cu80/v2_iso/rgb/info.json b/keyboards/capsunlocked/cu80/v2_iso/rgb/info.json deleted file mode 100644 index 4f08f6116a..0000000000 --- a/keyboards/capsunlocked/cu80/v2_iso/rgb/info.json +++ /dev/null @@ -1,12 +0,0 @@ -{ - "keyboard_name": "CU80 v2 ISO RGB", - "features": { - "rgblight": false - }, - "rgb_matrix": { - "driver": "WS2812" - }, - "usb": { - "pid": "0x0083" - } -} diff --git a/keyboards/capsunlocked/cu80/v2_iso/rgb/readme.md b/keyboards/capsunlocked/cu80/v2_iso/rgb/readme.md deleted file mode 100644 index c53bf74078..0000000000 --- a/keyboards/capsunlocked/cu80/v2_iso/rgb/readme.md +++ /dev/null @@ -1,3 +0,0 @@ -# CU80 v2 ISO RGB - -Overrides
\ No newline at end of file diff --git a/keyboards/capsunlocked/cu80/v2_iso/rgb/rules.mk b/keyboards/capsunlocked/cu80/v2_iso/rgb/rules.mk deleted file mode 100644 index 9470477f49..0000000000 --- a/keyboards/capsunlocked/cu80/v2_iso/rgb/rules.mk +++ /dev/null @@ -1,3 +0,0 @@ -RGB_MATRIX_ENABLE = yes # Enable RGB matrix - -LTO_ENABLE = yes diff --git a/keyboards/capsunlocked/cu80/v2_iso/rules.mk b/keyboards/capsunlocked/cu80/v2_iso/rules.mk deleted file mode 100644 index c0feb35307..0000000000 --- a/keyboards/capsunlocked/cu80/v2_iso/rules.mk +++ /dev/null @@ -1,3 +0,0 @@ -NO_USB_STARTUP_CHECK = yes # resolve possible sleep issue - -DEFAULT_FOLDER = capsunlocked/cu80/v2_iso/base diff --git a/keyboards/capsunlocked/cu80/v2_iso/v2_iso.c b/keyboards/capsunlocked/cu80/v2_iso/v2_iso.c deleted file mode 100644 index acb1d835aa..0000000000 --- a/keyboards/capsunlocked/cu80/v2_iso/v2_iso.c +++ /dev/null @@ -1,47 +0,0 @@ -/* -Copyright 2021 CapsUnlocked - -This program is free software: you can redistribute it and/or modify -it under the terms of the GNU General Public License as published by -the Free Software Foundation, either version 2 of the License, or -(at your option) any later version. - -This program is distributed in the hope that it will be useful, -but WITHOUT ANY WARRANTY; without even the implied warranty of -MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -GNU General Public License for more details. - -You should have received a copy of the GNU General Public License -along with this program. If not, see <http://www.gnu.org/licenses/>. -*/ - -#include "quantum.h" - -#ifdef CU80_RGB - -void matrix_init_kb(void) { - setPinOutput(E6); - matrix_init_user(); -} - -/* Set LED 62 (Caps Lock) and LED 14 (Scroll Lock) when key active */ -bool rgb_matrix_indicators_kb(void) { - if (!rgb_matrix_indicators_user()) { - return false; - } - if (host_keyboard_led_state().caps_lock) { - rgb_matrix_set_color(62, 255, 255, 255); - } - if (host_keyboard_led_state().scroll_lock) { - rgb_matrix_set_color(14, 255, 255, 255); - } - return true; -} - -/* Leds on the CU80 go ltr > rtl > ltr > rlt > Ltr > rtl */ -led_config_t g_led_config = {{{0, NO_LED, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15}, {32, 31, 30, 29, 28, 27, 26, 25, 24, 23, 22, 21, 20, 19, 18, 17, 16}, {33, 34, 35, 36, 37, 38, 39, 40, 41, 42, 43, 44, 45, 46, 47, 48, 49}, {62, 61, 60, 59, 58, 57, 56, 55, 54, 53, 52, 51, 50}, {63, 64, 65, 66, 67, 68, 69, 70, 71, 72, 73, 74, 75, NO_LED, NO_LED, 76}, {87, 86, 85, NO_LED, NO_LED, 84, NO_LED, NO_LED, NO_LED, 83, 82, 81, 80, 79, NO_LED, 78, 77}}, - /*board layout accounting for led directions */ - {{0, 0}, {28, 0}, {42, 0}, {56, 0}, {71, 0}, {85, 0}, {99, 0}, {113, 0}, {127, 0}, {141, 0}, {155, 0}, {169, 0}, {184, 0}, {198, 0}, {212, 0}, {226, 0}, {226, 26}, {212, 26}, {198, 26}, {184, 26}, {169, 26}, {155, 26}, {141, 26}, {127, 26}, {113, 26}, {99, 26}, {85, 26}, {71, 26}, {56, 26}, {42, 26}, {28, 26}, {14, 26}, {0, 26}, {0, 26}, {14, 26}, {28, 26}, {42, 26}, {56, 26}, {71, 26}, {85, 26}, {99, 26}, {113, 26}, {127, 26}, {141, 26}, {155, 26}, {169, 26}, {184, 26}, {198, 26}, {212, 26}, {226, 26}, {169, 38}, {155, 38}, {141, 38}, {127, 38}, {113, 38}, {99, 38}, {85, 38}, {71, 38}, {56, 38}, {42, 38}, {28, 38}, {14, 38}, {0, 38}, {0, 51}, {14, 51}, {28, 51}, {42, 51}, {56, 51}, {71, 51}, {85, 51}, {99, 51}, {113, 51}, {127, 51}, {141, 51}, {155, 51}, {169, 51}, {212, 51}, {226, 64}, {212, 64}, {184, 64}, {169, 64}, {155, 64}, {141, 64}, {127, 64}, {71, 64}, {28, 64}, {14, 64}, {0, 64}}, - /* marks scroll and caps as function modifiers for led effects */ - {4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 8, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 8, 1, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 1, 4, 4, 4, 4, 1, 1, 1, 1, 4, 1, 1, 1}}; -#endif diff --git a/keyboards/carbo65/rules.mk b/keyboards/carbo65/rules.mk index d6ed15acc7..d3ca7b060e 100644 --- a/keyboards/carbo65/rules.mk +++ b/keyboards/carbo65/rules.mk @@ -1,7 +1,3 @@ -# Do not put the microcontroller into power saving mode -# when we get USB suspend event. We want it to keep updating -# backlight effects. -OPT_DEFS += -DCORTEX_ENABLE_WFI_IDLE=TRUE # Build Options # change yes to no to disable diff --git a/keyboards/catch22/config.h b/keyboards/catch22/config.h index 98e0780698..a724174410 100644 --- a/keyboards/catch22/config.h +++ b/keyboards/catch22/config.h @@ -32,5 +32,4 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #define RGBLIGHT_EFFECT_RGB_TEST #define RGBLIGHT_EFFECT_ALTERNATING #define RGBLIGHT_EFFECT_TWINKLE -#define RGBLED_NUM 6 #endif diff --git a/keyboards/catch22/info.json b/keyboards/catch22/info.json index 6ffd3117af..0239b4f467 100644 --- a/keyboards/catch22/info.json +++ b/keyboards/catch22/info.json @@ -6,6 +6,9 @@ "pid": "0xCA22", "device_version": "0.0.1" }, + "rgblight": { + "led_count": 6 + }, "ws2812": { "pin": "F6" }, diff --git a/keyboards/chalice/config.h b/keyboards/chalice/config.h index 6bbd5af9bf..7024377ffc 100644 --- a/keyboards/chalice/config.h +++ b/keyboards/chalice/config.h @@ -18,8 +18,6 @@ #pragma once #ifdef RGBLIGHT_ENABLE - #define RGBLED_NUM 14 - #define RGBLIGHT_SLEEP #define RGBLIGHT_EFFECT_BREATHING #define RGBLIGHT_EFFECT_RAINBOW_MOOD #define RGBLIGHT_EFFECT_RAINBOW_SWIRL diff --git a/keyboards/chalice/info.json b/keyboards/chalice/info.json index 6b447c1fe6..d1fd939b16 100644 --- a/keyboards/chalice/info.json +++ b/keyboards/chalice/info.json @@ -8,6 +8,10 @@ "pid": "0x000C", "device_version": "0.0.1" }, + "rgblight": { + "led_count": 14, + "sleep": true + }, "ws2812": { "pin": "D3" }, diff --git a/keyboards/charue/sunsetter/rules.mk b/keyboards/charue/sunsetter/rules.mk index 0aeca0dd9f..7f4f202a1b 100644 --- a/keyboards/charue/sunsetter/rules.mk +++ b/keyboards/charue/sunsetter/rules.mk @@ -11,5 +11,3 @@ BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow AUDIO_ENABLE = no # Audio output -# Enter lower-power sleep mode when on the ChibiOS idle thread -OPT_DEFS += -DCORTEX_ENABLE_WFI_IDLE=TRUE diff --git a/keyboards/charue/sunsetter_r2/config.h b/keyboards/charue/sunsetter_r2/config.h index 4ef27597b3..c48e14fee9 100644 --- a/keyboards/charue/sunsetter_r2/config.h +++ b/keyboards/charue/sunsetter_r2/config.h @@ -4,7 +4,6 @@ #pragma once /* RGB */ -# define RGBLED_NUM 10 #define RGBLIGHT_EFFECT_BREATHING #define RGBLIGHT_EFFECT_RAINBOW_MOOD #define RGBLIGHT_EFFECT_RAINBOW_SWIRL diff --git a/keyboards/charue/sunsetter_r2/info.json b/keyboards/charue/sunsetter_r2/info.json index 502609402f..bf39937bb4 100644 --- a/keyboards/charue/sunsetter_r2/info.json +++ b/keyboards/charue/sunsetter_r2/info.json @@ -8,6 +8,9 @@ "pid": "0x5335", "device_version": "0.0.1" }, + "rgblight": { + "led_count": 10 + }, "ws2812": { "pin": "E6" }, diff --git a/keyboards/checkerboards/axon40/config.h b/keyboards/checkerboards/axon40/config.h index 530fa06413..a48f6d74e4 100644 --- a/keyboards/checkerboards/axon40/config.h +++ b/keyboards/checkerboards/axon40/config.h @@ -32,7 +32,3 @@ #define RGBLIGHT_EFFECT_RGB_TEST #define RGBLIGHT_EFFECT_ALTERNATING #define RGBLIGHT_EFFECT_TWINKLE -#define RGBLED_NUM 29 -#define RGBLIGHT_HUE_STEP 8 -#define RGBLIGHT_SAT_STEP 8 -#define RGBLIGHT_VAL_STEP 8 diff --git a/keyboards/checkerboards/axon40/info.json b/keyboards/checkerboards/axon40/info.json index 6b47a8f679..2d943acba7 100644 --- a/keyboards/checkerboards/axon40/info.json +++ b/keyboards/checkerboards/axon40/info.json @@ -8,6 +8,11 @@ "pid": "0x1119", "device_version": "0.0.1" }, + "rgblight": { + "saturation_steps": 8, + "brightness_steps": 8, + "led_count": 29 + }, "ws2812": { "pin": "D7" }, diff --git a/keyboards/checkerboards/candybar_ortho/config.h b/keyboards/checkerboards/candybar_ortho/config.h index 0033db5d2b..419c77945c 100644 --- a/keyboards/checkerboards/candybar_ortho/config.h +++ b/keyboards/checkerboards/candybar_ortho/config.h @@ -32,7 +32,3 @@ #define RGBLIGHT_EFFECT_RGB_TEST #define RGBLIGHT_EFFECT_ALTERNATING #define RGBLIGHT_EFFECT_TWINKLE -#define RGBLED_NUM 18 -#define RGBLIGHT_HUE_STEP 8 -#define RGBLIGHT_SAT_STEP 8 -#define RGBLIGHT_VAL_STEP 8 diff --git a/keyboards/checkerboards/candybar_ortho/info.json b/keyboards/checkerboards/candybar_ortho/info.json index 3369eee53d..ac1485c7cc 100644 --- a/keyboards/checkerboards/candybar_ortho/info.json +++ b/keyboards/checkerboards/candybar_ortho/info.json @@ -8,6 +8,11 @@ "pid": "0x3215", "device_version": "0.0.1" }, + "rgblight": { + "saturation_steps": 8, + "brightness_steps": 8, + "led_count": 18 + }, "ws2812": { "pin": "B7" }, diff --git a/keyboards/checkerboards/nop60/config.h b/keyboards/checkerboards/nop60/config.h index 3c52543d25..cf5b1ff906 100644 --- a/keyboards/checkerboards/nop60/config.h +++ b/keyboards/checkerboards/nop60/config.h @@ -30,10 +30,6 @@ Copyright 2021 Nathan Spears #define RGBLIGHT_EFFECT_RGB_TEST #define RGBLIGHT_EFFECT_ALTERNATING #define RGBLIGHT_EFFECT_TWINKLE -#define RGBLED_NUM 14 // number of LEDs -#define RGBLIGHT_HUE_STEP 12 // units to step when in/decreasing hue -#define RGBLIGHT_SAT_STEP 12 // units to step when in/decresing saturation -#define RGBLIGHT_VAL_STEP 12 // units to step when in/decreasing value (brightness) /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ #define LOCKING_SUPPORT_ENABLE diff --git a/keyboards/checkerboards/nop60/info.json b/keyboards/checkerboards/nop60/info.json index 9f44cfd41f..8b164a9982 100644 --- a/keyboards/checkerboards/nop60/info.json +++ b/keyboards/checkerboards/nop60/info.json @@ -18,6 +18,12 @@ "levels": 6, "breathing": true }, + "rgblight": { + "hue_steps": 12, + "saturation_steps": 12, + "brightness_steps": 12, + "led_count": 14 + }, "ws2812": { "pin": "D2" }, diff --git a/keyboards/checkerboards/plexus75/config.h b/keyboards/checkerboards/plexus75/config.h index 50aa698524..e3e6a51249 100644 --- a/keyboards/checkerboards/plexus75/config.h +++ b/keyboards/checkerboards/plexus75/config.h @@ -48,7 +48,3 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #define RGBLIGHT_EFFECT_RGB_TEST #define RGBLIGHT_EFFECT_ALTERNATING #define RGBLIGHT_EFFECT_TWINKLE -#define RGBLED_NUM 14 // number of LEDs -#define RGBLIGHT_HUE_STEP 12 // units to step when in/decreasing hue -#define RGBLIGHT_SAT_STEP 25 // units to step when in/decresing saturation -#define RGBLIGHT_VAL_STEP 12 // units to step when in/decreasing value (brightness) diff --git a/keyboards/checkerboards/plexus75/info.json b/keyboards/checkerboards/plexus75/info.json index 30d8df7edb..638909d9f9 100644 --- a/keyboards/checkerboards/plexus75/info.json +++ b/keyboards/checkerboards/plexus75/info.json @@ -8,6 +8,12 @@ "pid": "0x5338", "device_version": "0.0.1" }, + "rgblight": { + "hue_steps": 12, + "saturation_steps": 25, + "brightness_steps": 12, + "led_count": 14 + }, "ws2812": { "pin": "D3" }, diff --git a/keyboards/checkerboards/plexus75_he/config.h b/keyboards/checkerboards/plexus75_he/config.h index bfa5878383..98ed0df629 100644 --- a/keyboards/checkerboards/plexus75_he/config.h +++ b/keyboards/checkerboards/plexus75_he/config.h @@ -33,7 +33,3 @@ #define RGBLIGHT_EFFECT_RGB_TEST #define RGBLIGHT_EFFECT_ALTERNATING #define RGBLIGHT_EFFECT_TWINKLE -#define RGBLED_NUM 18 // number of LEDs -#define RGBLIGHT_HUE_STEP 12 // units to step when in/decreasing hue -#define RGBLIGHT_SAT_STEP 12 // units to step when in/decresing saturation -#define RGBLIGHT_VAL_STEP 12 // units to step when in/decreasing value (brightness) diff --git a/keyboards/checkerboards/plexus75_he/info.json b/keyboards/checkerboards/plexus75_he/info.json index fc1dfc9fd5..bc1b884d0c 100644 --- a/keyboards/checkerboards/plexus75_he/info.json +++ b/keyboards/checkerboards/plexus75_he/info.json @@ -8,6 +8,12 @@ "pid": "0x5339", "device_version": "0.0.1" }, + "rgblight": { + "hue_steps": 12, + "saturation_steps": 12, + "brightness_steps": 12, + "led_count": 18 + }, "ws2812": { "pin": "D4" }, diff --git a/keyboards/checkerboards/pursuit40/config.h b/keyboards/checkerboards/pursuit40/config.h index 6fe6785edb..b83c73672a 100644 --- a/keyboards/checkerboards/pursuit40/config.h +++ b/keyboards/checkerboards/pursuit40/config.h @@ -49,7 +49,3 @@ #define RGBLIGHT_EFFECT_RGB_TEST #define RGBLIGHT_EFFECT_ALTERNATING #define RGBLIGHT_EFFECT_TWINKLE -#define RGBLED_NUM 12 // number of LEDs -#define RGBLIGHT_HUE_STEP 12 // units to step when in/decreasing hue -#define RGBLIGHT_SAT_STEP 12 // units to step when in/decresing saturation -#define RGBLIGHT_VAL_STEP 12 // units to step when in/decreasing value (brightness) diff --git a/keyboards/checkerboards/pursuit40/info.json b/keyboards/checkerboards/pursuit40/info.json index 0f4394b87f..0785b84397 100644 --- a/keyboards/checkerboards/pursuit40/info.json +++ b/keyboards/checkerboards/pursuit40/info.json @@ -8,6 +8,12 @@ "pid": "0x1620", "device_version": "0.0.1" }, + "rgblight": { + "hue_steps": 12, + "saturation_steps": 12, + "brightness_steps": 12, + "led_count": 12 + }, "ws2812": { "pin": "F0" }, diff --git a/keyboards/checkerboards/quark/config.h b/keyboards/checkerboards/quark/config.h index efa8f93d3e..daf6c8df84 100644 --- a/keyboards/checkerboards/quark/config.h +++ b/keyboards/checkerboards/quark/config.h @@ -33,7 +33,3 @@ #define RGBLIGHT_EFFECT_RGB_TEST #define RGBLIGHT_EFFECT_ALTERNATING #define RGBLIGHT_EFFECT_TWINKLE -#define RGBLED_NUM 14 // number of LEDs -#define RGBLIGHT_HUE_STEP 12 // units to step when in/decreasing hue -#define RGBLIGHT_SAT_STEP 12 // units to step when in/decresing saturation -#define RGBLIGHT_VAL_STEP 12 // units to step when in/decreasing value (brightness) diff --git a/keyboards/checkerboards/quark/info.json b/keyboards/checkerboards/quark/info.json index 262cd6e60c..7b5640dcec 100644 --- a/keyboards/checkerboards/quark/info.json +++ b/keyboards/checkerboards/quark/info.json @@ -8,6 +8,12 @@ "pid": "0x5340", "device_version": "0.0.1" }, + "rgblight": { + "hue_steps": 12, + "saturation_steps": 12, + "brightness_steps": 12, + "led_count": 14 + }, "ws2812": { "pin": "D0" }, diff --git a/keyboards/checkerboards/quark_lp/config.h b/keyboards/checkerboards/quark_lp/config.h index 75345075e7..ca124775d7 100644 --- a/keyboards/checkerboards/quark_lp/config.h +++ b/keyboards/checkerboards/quark_lp/config.h @@ -22,17 +22,11 @@ /* Locking resynchronize hack */ #define LOCKING_RESYNC_ENABLE -#define TAPPING_TOGGLE 2 - #ifdef RGB_MATRIX_ENABLE #define RGB_MATRIX_LED_COUNT 51 #define RGB_MATRIX_KEYPRESSES // reacts to keypresses #define RGB_DISABLE_WHEN_USB_SUSPENDED // turn off effects when suspended #define RGB_MATRIX_MAXIMUM_BRIGHTNESS 125 // limits maximum brightness of LEDs to 125 out of 255. Higher may cause the controller to crash. -#define RGB_MATRIX_HUE_STEP 8 -#define RGB_MATRIX_SAT_STEP 8 -#define RGB_MATRIX_VAL_STEP 8 -#define RGB_MATRIX_SPD_STEP 10 // RGB Matrix Animation modes. Explicitly enabled // For full list of effects, see: diff --git a/keyboards/checkerboards/quark_lp/info.json b/keyboards/checkerboards/quark_lp/info.json index 264bddad12..201de629da 100644 --- a/keyboards/checkerboards/quark_lp/info.json +++ b/keyboards/checkerboards/quark_lp/info.json @@ -12,7 +12,10 @@ "pin": "C2" }, "rgb_matrix": { - "driver": "WS2812" + "driver": "WS2812", + "sat_steps": 8, + "val_steps": 8, + "speed_steps": 10 }, "matrix_pins": { "cols": ["B6", "B5", "B4", "B3", "B0", "D6", "D5", "D4", "D3", "D2", "D1", "D0"], @@ -21,6 +24,9 @@ "diode_direction": "COL2ROW", "processor": "atmega32u2", "bootloader": "atmel-dfu", + "tapping": { + "toggle": 2 + }, "layouts": { "LAYOUT_ortho_4x12": { "layout": [ diff --git a/keyboards/checkerboards/quark_plus/config.h b/keyboards/checkerboards/quark_plus/config.h index 4136faaa7a..1fccfb7d21 100644 --- a/keyboards/checkerboards/quark_plus/config.h +++ b/keyboards/checkerboards/quark_plus/config.h @@ -33,7 +33,3 @@ #define RGBLIGHT_EFFECT_RGB_TEST #define RGBLIGHT_EFFECT_ALTERNATING #define RGBLIGHT_EFFECT_TWINKLE -#define RGBLED_NUM 14 // number of LEDs -#define RGBLIGHT_HUE_STEP 12 // units to step when in/decreasing hue -#define RGBLIGHT_SAT_STEP 12 // units to step when in/decresing saturation -#define RGBLIGHT_VAL_STEP 12 // units to step when in/decreasing value (brightness) diff --git a/keyboards/checkerboards/quark_plus/info.json b/keyboards/checkerboards/quark_plus/info.json index 0d47ec2ec4..3b8803ce71 100644 --- a/keyboards/checkerboards/quark_plus/info.json +++ b/keyboards/checkerboards/quark_plus/info.json @@ -8,6 +8,12 @@ "pid": "0x5344", "device_version": "0.0.1" }, + "rgblight": { + "hue_steps": 12, + "saturation_steps": 12, + "brightness_steps": 12, + "led_count": 14 + }, "ws2812": { "pin": "C5" }, diff --git a/keyboards/checkerboards/quark_squared/config.h b/keyboards/checkerboards/quark_squared/config.h index 514ce68f3f..98ed0df629 100644 --- a/keyboards/checkerboards/quark_squared/config.h +++ b/keyboards/checkerboards/quark_squared/config.h @@ -33,7 +33,3 @@ #define RGBLIGHT_EFFECT_RGB_TEST #define RGBLIGHT_EFFECT_ALTERNATING #define RGBLIGHT_EFFECT_TWINKLE -#define RGBLED_NUM 14 // number of LEDs -#define RGBLIGHT_HUE_STEP 12 // units to step when in/decreasing hue -#define RGBLIGHT_SAT_STEP 12 // units to step when in/decresing saturation -#define RGBLIGHT_VAL_STEP 12 // units to step when in/decreasing value (brightness) diff --git a/keyboards/checkerboards/quark_squared/info.json b/keyboards/checkerboards/quark_squared/info.json index bd6233b208..6ce11b449f 100644 --- a/keyboards/checkerboards/quark_squared/info.json +++ b/keyboards/checkerboards/quark_squared/info.json @@ -8,6 +8,12 @@ "pid": "0x5342", "device_version": "0.0.1" }, + "rgblight": { + "hue_steps": 12, + "saturation_steps": 12, + "brightness_steps": 12, + "led_count": 14 + }, "ws2812": { "pin": "D0" }, diff --git a/keyboards/checkerboards/snop60/config.h b/keyboards/checkerboards/snop60/config.h index d11757cc15..24eb330d02 100644 --- a/keyboards/checkerboards/snop60/config.h +++ b/keyboards/checkerboards/snop60/config.h @@ -28,10 +28,6 @@ Copyright 2022 Nathan Spears #define RGBLIGHT_EFFECT_RGB_TEST #define RGBLIGHT_EFFECT_ALTERNATING #define RGBLIGHT_EFFECT_TWINKLE -#define RGBLED_NUM 14 // number of LEDs -#define RGBLIGHT_HUE_STEP 12 // units to step when in/decreasing hue -#define RGBLIGHT_SAT_STEP 12 // units to step when in/decresing saturation -#define RGBLIGHT_VAL_STEP 12 // units to step when in/decreasing value (brightness) /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ #define LOCKING_SUPPORT_ENABLE diff --git a/keyboards/checkerboards/snop60/info.json b/keyboards/checkerboards/snop60/info.json index 94d40e6645..00194c0184 100644 --- a/keyboards/checkerboards/snop60/info.json +++ b/keyboards/checkerboards/snop60/info.json @@ -23,6 +23,12 @@ "levels": 6, "breathing": true }, + "rgblight": { + "hue_steps": 12, + "saturation_steps": 12, + "brightness_steps": 12, + "led_count": 14 + }, "ws2812": { "pin": "B1" }, diff --git a/keyboards/checkerboards/ud40_ortho_alt/config.h b/keyboards/checkerboards/ud40_ortho_alt/config.h index 788fbe39a9..98ed0df629 100644 --- a/keyboards/checkerboards/ud40_ortho_alt/config.h +++ b/keyboards/checkerboards/ud40_ortho_alt/config.h @@ -33,7 +33,3 @@ #define RGBLIGHT_EFFECT_RGB_TEST #define RGBLIGHT_EFFECT_ALTERNATING #define RGBLIGHT_EFFECT_TWINKLE -#define RGBLED_NUM 12 // number of LEDs -#define RGBLIGHT_HUE_STEP 12 // units to step when in/decreasing hue -#define RGBLIGHT_SAT_STEP 12 // units to step when in/decresing saturation -#define RGBLIGHT_VAL_STEP 12 // units to step when in/decreasing value (brightness) diff --git a/keyboards/checkerboards/ud40_ortho_alt/info.json b/keyboards/checkerboards/ud40_ortho_alt/info.json index 7d49bdb5b4..78d1c806b3 100644 --- a/keyboards/checkerboards/ud40_ortho_alt/info.json +++ b/keyboards/checkerboards/ud40_ortho_alt/info.json @@ -8,6 +8,12 @@ "pid": "0x7030", "device_version": "0.0.1" }, + "rgblight": { + "hue_steps": 12, + "saturation_steps": 12, + "brightness_steps": 12, + "led_count": 12 + }, "ws2812": { "pin": "D4" }, diff --git a/keyboards/cherrybstudio/cb1800/config.h b/keyboards/cherrybstudio/cb1800/config.h index 21aeb17d77..8e87adda59 100644 --- a/keyboards/cherrybstudio/cb1800/config.h +++ b/keyboards/cherrybstudio/cb1800/config.h @@ -23,7 +23,3 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. # define RGBLIGHT_EFFECT_RGB_TEST # define RGBLIGHT_EFFECT_ALTERNATING # define RGBLIGHT_EFFECT_TWINKLE -# define RGBLED_NUM 20 -# define RGBLIGHT_HUE_STEP 8 -# define RGBLIGHT_SAT_STEP 8 -# define RGBLIGHT_VAL_STEP 8 diff --git a/keyboards/cherrybstudio/cb1800/info.json b/keyboards/cherrybstudio/cb1800/info.json index 1b2fadd2a9..306e2338ce 100644 --- a/keyboards/cherrybstudio/cb1800/info.json +++ b/keyboards/cherrybstudio/cb1800/info.json @@ -19,6 +19,11 @@ "scroll_lock": "F7", "on_state": 0 }, + "rgblight": { + "saturation_steps": 8, + "brightness_steps": 8, + "led_count": 20 + }, "ws2812": { "pin": "E6" }, diff --git a/keyboards/cherrybstudio/cb65/config.h b/keyboards/cherrybstudio/cb65/config.h index e463e1d6c7..18bd076b1d 100644 --- a/keyboards/cherrybstudio/cb65/config.h +++ b/keyboards/cherrybstudio/cb65/config.h @@ -24,7 +24,3 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #define RGBLIGHT_EFFECT_RGB_TEST #define RGBLIGHT_EFFECT_ALTERNATING #define RGBLIGHT_EFFECT_TWINKLE -#define RGBLED_NUM 24 -#define RGBLIGHT_HUE_STEP 8 -#define RGBLIGHT_SAT_STEP 8 -#define RGBLIGHT_VAL_STEP 8 diff --git a/keyboards/cherrybstudio/cb65/info.json b/keyboards/cherrybstudio/cb65/info.json index 37038b214f..de4fd4f9d7 100644 --- a/keyboards/cherrybstudio/cb65/info.json +++ b/keyboards/cherrybstudio/cb65/info.json @@ -18,6 +18,11 @@ "scroll_lock": "F4", "on_state": 0 }, + "rgblight": { + "saturation_steps": 8, + "brightness_steps": 8, + "led_count": 24 + }, "ws2812": { "pin": "F0" }, diff --git a/keyboards/cherrybstudio/cb87/config.h b/keyboards/cherrybstudio/cb87/config.h index ddb9102d36..7b44004187 100644 --- a/keyboards/cherrybstudio/cb87/config.h +++ b/keyboards/cherrybstudio/cb87/config.h @@ -23,7 +23,3 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #define RGBLIGHT_EFFECT_RGB_TEST #define RGBLIGHT_EFFECT_ALTERNATING #define RGBLIGHT_EFFECT_TWINKLE -#define RGBLED_NUM 22 /* 16 Bottom 6 top*/ -#define RGBLIGHT_HUE_STEP 8 -#define RGBLIGHT_SAT_STEP 8 -#define RGBLIGHT_VAL_STEP 8 diff --git a/keyboards/cherrybstudio/cb87/info.json b/keyboards/cherrybstudio/cb87/info.json index ac32d5f8ea..06ebed630b 100644 --- a/keyboards/cherrybstudio/cb87/info.json +++ b/keyboards/cherrybstudio/cb87/info.json @@ -16,6 +16,11 @@ "backlight": { "pin": "B6" }, + "rgblight": { + "saturation_steps": 8, + "brightness_steps": 8, + "led_count": 22 + }, "ws2812": { "pin": "E6" }, diff --git a/keyboards/cherrybstudio/cb87v2/config.h b/keyboards/cherrybstudio/cb87v2/config.h index 4c66b113e7..7b44004187 100644 --- a/keyboards/cherrybstudio/cb87v2/config.h +++ b/keyboards/cherrybstudio/cb87v2/config.h @@ -23,7 +23,3 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #define RGBLIGHT_EFFECT_RGB_TEST #define RGBLIGHT_EFFECT_ALTERNATING #define RGBLIGHT_EFFECT_TWINKLE -#define RGBLED_NUM 24 -#define RGBLIGHT_HUE_STEP 8 -#define RGBLIGHT_SAT_STEP 8 -#define RGBLIGHT_VAL_STEP 8 diff --git a/keyboards/cherrybstudio/cb87v2/info.json b/keyboards/cherrybstudio/cb87v2/info.json index 8c35532c32..5c743447b5 100644 --- a/keyboards/cherrybstudio/cb87v2/info.json +++ b/keyboards/cherrybstudio/cb87v2/info.json @@ -21,6 +21,11 @@ "scroll_lock": "F4", "on_state": 0 }, + "rgblight": { + "saturation_steps": 8, + "brightness_steps": 8, + "led_count": 24 + }, "ws2812": { "pin": "E6" }, diff --git a/keyboards/cheshire/curiosity/config.h b/keyboards/cheshire/curiosity/config.h index 71b0146437..6460a7cf8a 100644 --- a/keyboards/cheshire/curiosity/config.h +++ b/keyboards/cheshire/curiosity/config.h @@ -17,8 +17,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #pragma once -#define RGBLED_NUM 14 - #define RGBLIGHT_EFFECT_BREATHING #define RGBLIGHT_EFFECT_RAINBOW_MOOD #define RGBLIGHT_EFFECT_RAINBOW_SWIRL diff --git a/keyboards/cheshire/curiosity/info.json b/keyboards/cheshire/curiosity/info.json index fa8180e5af..464136b5d3 100644 --- a/keyboards/cheshire/curiosity/info.json +++ b/keyboards/cheshire/curiosity/info.json @@ -7,6 +7,9 @@ "pid": "0x0FAD", "device_version": "0.0.1" }, + "rgblight": { + "led_count": 14 + }, "ws2812": { "pin": "B15" }, diff --git a/keyboards/chlx/str_merro60/config.h b/keyboards/chlx/str_merro60/config.h index 62b31cf95b..9beedbaf8b 100644 --- a/keyboards/chlx/str_merro60/config.h +++ b/keyboards/chlx/str_merro60/config.h @@ -28,12 +28,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. # define RGBLIGHT_EFFECT_ALTERNATING # define RGBLIGHT_EFFECT_TWINKLE # define RGBLIGHT_DEFAULT_MODE RGBLIGHT_MODE_RAINBOW_SWIRL + 5 -# define RGBLED_NUM 12 -# define RGBLIGHT_LED_MAP { 0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11 } -# define RGBLIGHT_HUE_STEP 8 -# define RGBLIGHT_SAT_STEP 8 -# define RGBLIGHT_VAL_STEP 8 -# define RGBLIGHT_SLEEP /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ #define LOCKING_SUPPORT_ENABLE diff --git a/keyboards/chlx/str_merro60/info.json b/keyboards/chlx/str_merro60/info.json index add2f077fe..aecc89c39b 100644 --- a/keyboards/chlx/str_merro60/info.json +++ b/keyboards/chlx/str_merro60/info.json @@ -8,6 +8,12 @@ "pid": "0x0602", "device_version": "1.0.0" }, + "rgblight": { + "saturation_steps": 8, + "brightness_steps": 8, + "led_count": 12, + "sleep": true + }, "ws2812": { "pin": "D3" }, diff --git a/keyboards/cipulot/ec_prox/jis/info.json b/keyboards/cipulot/ec_prox/jis/info.json index 8404967909..6016004b1b 100644 --- a/keyboards/cipulot/ec_prox/jis/info.json +++ b/keyboards/cipulot/ec_prox/jis/info.json @@ -52,75 +52,79 @@ "layouts": { "LAYOUT_jp": { "layout": [ - {"label": "0,0", "matrix": [0, 0], "x": 0.0, "y": 0.0}, - {"label": "0,1", "matrix": [0, 1], "x": 1.0, "y": 0.0}, - {"label": "0,2", "matrix": [0, 2], "x": 2.0, "y": 0.0}, - {"label": "0,3", "matrix": [0, 3], "x": 3.0, "y": 0.0}, - {"label": "0,4", "matrix": [0, 4], "x": 4.0, "y": 0.0}, - {"label": "0,5", "matrix": [0, 5], "x": 5.0, "y": 0.0}, - {"label": "0,6", "matrix": [0, 6], "x": 6.0, "y": 0.0}, - {"label": "0,7", "matrix": [0, 7], "x": 7.0, "y": 0.0}, - {"label": "0,8", "matrix": [0, 8], "x": 8.0, "y": 0.0}, - {"label": "0,9", "matrix": [0, 9], "x": 9.0, "y": 0.0}, - {"label": "0,10", "matrix": [0, 10], "x": 10.0, "y": 0.0}, - {"label": "0,11", "matrix": [0, 11], "x": 11.0, "y": 0.0}, - {"label": "0,12", "matrix": [0, 12], "x": 12.0, "y": 0.0}, - {"label": "0,13", "matrix": [0, 13], "x": 13.0, "y": 0.0}, - {"label": "1,13", "matrix": [1, 13], "x": 14.0, "y": 0.0}, - {"label": "1,0", "matrix": [1, 0], "w": 1.5, "x": 0.0, "y": 1.0}, - {"label": "1,1", "matrix": [1, 1], "x": 1.5, "y": 1.0}, - {"label": "1,2", "matrix": [1, 2], "x": 2.5, "y": 1.0}, - {"label": "1,3", "matrix": [1, 3], "x": 3.5, "y": 1.0}, - {"label": "1,4", "matrix": [1, 4], "x": 4.5, "y": 1.0}, - {"label": "1,5", "matrix": [1, 5], "x": 5.5, "y": 1.0}, - {"label": "1,6", "matrix": [1, 6], "x": 6.5, "y": 1.0}, - {"label": "1,7", "matrix": [1, 7], "x": 7.5, "y": 1.0}, - {"label": "1,8", "matrix": [1, 8], "x": 8.5, "y": 1.0}, - {"label": "1,9", "matrix": [1, 9], "x": 9.5, "y": 1.0}, - {"label": "1,10", "matrix": [1, 10], "x": 10.5, "y": 1.0}, - {"label": "1,11", "matrix": [1, 11], "x": 11.5, "y": 1.0}, - {"label": "1,12", "matrix": [1, 12], "x": 12.5, "y": 1.0}, - {"h": 2, "label": "2,13", "matrix": [2, 13], "w": 1.25, "x": 13.75, "y": 1.0}, - {"label": "2,0", "matrix": [2, 0], "w": 1.75, "x": 0.0, "y": 2.0}, - {"label": "2,1", "matrix": [2, 1], "x": 1.75, "y": 2.0}, - {"label": "2,2", "matrix": [2, 2], "x": 2.75, "y": 2.0}, - {"label": "2,3", "matrix": [2, 3], "x": 3.75, "y": 2.0}, - {"label": "2,4", "matrix": [2, 4], "x": 4.75, "y": 2.0}, - {"label": "2,5", "matrix": [2, 5], "x": 5.75, "y": 2.0}, - {"label": "2,6", "matrix": [2, 6], "x": 6.75, "y": 2.0}, - {"label": "2,7", "matrix": [2, 7], "x": 7.75, "y": 2.0}, - {"label": "2,8", "matrix": [2, 8], "x": 8.75, "y": 2.0}, - {"label": "2,9", "matrix": [2, 9], "x": 9.75, "y": 2.0}, - {"label": "2,10", "matrix": [2, 10], "x": 10.75, "y": 2.0}, - {"label": "2,11", "matrix": [2, 11], "x": 11.75, "y": 2.0}, - {"label": "2,12", "matrix": [2, 12], "x": 12.75, "y": 2.0}, - {"label": "3,0", "matrix": [3, 0], "w": 2, "x": 0.0, "y": 3.0}, - {"label": "3,1", "matrix": [3, 1], "x": 2.0, "y": 3.0}, - {"label": "3,2", "matrix": [3, 2], "x": 3.0, "y": 3.0}, - {"label": "3,3", "matrix": [3, 3], "x": 4.0, "y": 3.0}, - {"label": "3,4", "matrix": [3, 4], "x": 5.0, "y": 3.0}, - {"label": "3,5", "matrix": [3, 5], "x": 6.0, "y": 3.0}, - {"label": "3,6", "matrix": [3, 6], "x": 7.0, "y": 3.0}, - {"label": "3,7", "matrix": [3, 7], "x": 8.0, "y": 3.0}, - {"label": "3,8", "matrix": [3, 8], "x": 9.0, "y": 3.0}, - {"label": "3,9", "matrix": [3, 9], "x": 10.0, "y": 3.0}, - {"label": "3,10", "matrix": [3, 10], "x": 11.0, "y": 3.0}, - {"label": "3,11", "matrix": [3, 11], "x": 12.0, "y": 3.0}, - {"label": "3,12", "matrix": [3, 12], "x": 13.0, "y": 3.0}, - {"label": "3,13", "matrix": [3, 13], "x": 14.0, "y": 3.0}, - {"label": "4,0", "matrix": [4, 0], "x": 0.0, "y": 4.0}, - {"label": "4,1", "matrix": [4, 1], "x": 1.25, "y": 4.0}, - {"label": "4,2", "matrix": [4, 2], "x": 2.25, "y": 4.0}, - {"label": "4,3", "matrix": [4, 3], "x": 3.25, "y": 4.0}, - {"label": "4,4", "matrix": [4, 4], "x": 4.25, "y": 4.0}, - {"label": "4,5", "matrix": [4, 5], "w": 2.5, "x": 5.25, "y": 4.0}, - {"label": "4,7", "matrix": [4, 7], "x": 7.75, "y": 4.0}, - {"label": "4,8", "matrix": [4, 8], "x": 8.75, "y": 4.0}, - {"label": "4,9", "matrix": [4, 9], "x": 9.75, "y": 4.0}, - {"label": "4,10", "matrix": [4, 10], "x": 10.75, "y": 4.0}, - {"label": "4,11", "matrix": [4, 11], "x": 12.0, "y": 4.0}, - {"label": "4,12", "matrix": [4, 12], "x": 13.0, "y": 4.0}, - {"label": "4,13", "matrix": [4, 13], "x": 14.0, "y": 4.0} + {"matrix": [0, 0], "x": 0, "y": 0}, + {"matrix": [0, 1], "x": 1, "y": 0}, + {"matrix": [0, 2], "x": 2, "y": 0}, + {"matrix": [0, 3], "x": 3, "y": 0}, + {"matrix": [0, 4], "x": 4, "y": 0}, + {"matrix": [0, 5], "x": 5, "y": 0}, + {"matrix": [0, 6], "x": 6, "y": 0}, + {"matrix": [0, 7], "x": 7, "y": 0}, + {"matrix": [0, 8], "x": 8, "y": 0}, + {"matrix": [0, 9], "x": 9, "y": 0}, + {"matrix": [0, 10], "x": 10, "y": 0}, + {"matrix": [0, 11], "x": 11, "y": 0}, + {"matrix": [0, 12], "x": 12, "y": 0}, + {"matrix": [0, 13], "x": 13, "y": 0}, + {"matrix": [1, 13], "x": 14, "y": 0}, + + {"matrix": [1, 0], "x": 0, "y": 1, "w": 1.5}, + {"matrix": [1, 1], "x": 1.5, "y": 1}, + {"matrix": [1, 2], "x": 2.5, "y": 1}, + {"matrix": [1, 3], "x": 3.5, "y": 1}, + {"matrix": [1, 4], "x": 4.5, "y": 1}, + {"matrix": [1, 5], "x": 5.5, "y": 1}, + {"matrix": [1, 6], "x": 6.5, "y": 1}, + {"matrix": [1, 7], "x": 7.5, "y": 1}, + {"matrix": [1, 8], "x": 8.5, "y": 1}, + {"matrix": [1, 9], "x": 9.5, "y": 1}, + {"matrix": [1, 10], "x": 10.5, "y": 1}, + {"matrix": [1, 11], "x": 11.5, "y": 1}, + {"matrix": [1, 12], "x": 12.5, "y": 1}, + + {"matrix": [2, 0], "x": 0, "y": 2, "w": 1.75}, + {"matrix": [2, 1], "x": 1.75, "y": 2}, + {"matrix": [2, 2], "x": 2.75, "y": 2}, + {"matrix": [2, 3], "x": 3.75, "y": 2}, + {"matrix": [2, 4], "x": 4.75, "y": 2}, + {"matrix": [2, 5], "x": 5.75, "y": 2}, + {"matrix": [2, 6], "x": 6.75, "y": 2}, + {"matrix": [2, 7], "x": 7.75, "y": 2}, + {"matrix": [2, 8], "x": 8.75, "y": 2}, + {"matrix": [2, 9], "x": 9.75, "y": 2}, + {"matrix": [2, 10], "x": 10.75, "y": 2}, + {"matrix": [2, 11], "x": 11.75, "y": 2}, + {"matrix": [2, 12], "x": 12.75, "y": 2}, + {"matrix": [2, 13], "x": 13.75, "y": 1, "w": 1.25, "h": 2}, + + {"matrix": [3, 0], "x": 0, "y": 3, "w": 2}, + {"matrix": [3, 1], "x": 2, "y": 3}, + {"matrix": [3, 2], "x": 3, "y": 3}, + {"matrix": [3, 3], "x": 4, "y": 3}, + {"matrix": [3, 4], "x": 5, "y": 3}, + {"matrix": [3, 5], "x": 6, "y": 3}, + {"matrix": [3, 6], "x": 7, "y": 3}, + {"matrix": [3, 7], "x": 8, "y": 3}, + {"matrix": [3, 8], "x": 9, "y": 3}, + {"matrix": [3, 9], "x": 10, "y": 3}, + {"matrix": [3, 10], "x": 11, "y": 3}, + {"matrix": [3, 11], "x": 12, "y": 3}, + {"matrix": [3, 12], "x": 13, "y": 3}, + {"matrix": [3, 13], "x": 14, "y": 3}, + + {"matrix": [4, 0], "x": 0, "y": 4}, + {"matrix": [4, 1], "x": 1.25, "y": 4}, + {"matrix": [4, 2], "x": 2.25, "y": 4}, + {"matrix": [4, 3], "x": 3.25, "y": 4}, + {"matrix": [4, 4], "x": 4.25, "y": 4}, + {"matrix": [4, 5], "x": 5.25, "y": 4, "w": 2.5}, + {"matrix": [4, 7], "x": 7.75, "y": 4}, + {"matrix": [4, 8], "x": 8.75, "y": 4}, + {"matrix": [4, 9], "x": 9.75, "y": 4}, + {"matrix": [4, 10], "x": 10.75, "y": 4}, + {"matrix": [4, 11], "x": 12, "y": 4}, + {"matrix": [4, 12], "x": 13, "y": 4}, + {"matrix": [4, 13], "x": 14, "y": 4} ] } } diff --git a/keyboards/cipulot/ec_prox/jis/keymaps/default/keymap.c b/keyboards/cipulot/ec_prox/jis/keymaps/default/keymap.c index 979319a622..2a64063a0b 100644 --- a/keyboards/cipulot/ec_prox/jis/keymaps/default/keymap.c +++ b/keyboards/cipulot/ec_prox/jis/keymaps/default/keymap.c @@ -21,14 +21,14 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { // clang-format off [0] = LAYOUT_jp( - KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, JP_YEN, KC_BSPC, - KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, - KC_LCTL, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_BSLS, KC_ENT, - KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, JP_UNDS, KC_UP, KC_RSFT, - MO(1), JP_ZKHK, KC_LGUI, KC_LALT, JP_MHEN, KC_SPC, JP_HENK, JP_KANA, KC_RALT, MO(1), KC_LEFT, KC_DOWN, KC_RGHT), + KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, JP_YEN, KC_BSPC, + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, + KC_LCTL, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_BSLS, KC_ENT, + KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, JP_UNDS, KC_UP, KC_RSFT, + MO(1), JP_ZKHK, KC_LGUI, KC_LALT, JP_MHEN, KC_SPC, JP_HENK, JP_KANA, KC_RALT, MO(1), KC_LEFT, KC_DOWN, KC_RGHT), [1] = LAYOUT_jp( - _______, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_INS, KC_DEL, + _______, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_INS, KC_DEL, KC_CAPS, _______, _______, _______, _______, _______, _______, _______, KC_PSCR, KC_SCRL, KC_PAUS, KC_UP, _______, _______, KC_VOLD, KC_VOLU, KC_MUTE, _______, _______, KC_PAST, KC_PSLS, KC_HOME, KC_PGUP, KC_LEFT, KC_RGHT, _______, KC_PENT, _______, _______, _______, _______, _______, _______, KC_PPLS, KC_PMNS, KC_END, KC_PGDN, KC_DOWN, _______, _______, _______, diff --git a/keyboards/cipulot/ec_prox/jis/keymaps/via/keymap.c b/keyboards/cipulot/ec_prox/jis/keymaps/via/keymap.c index cc9382531d..2a64063a0b 100644 --- a/keyboards/cipulot/ec_prox/jis/keymaps/via/keymap.c +++ b/keyboards/cipulot/ec_prox/jis/keymaps/via/keymap.c @@ -21,31 +21,31 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { // clang-format off [0] = LAYOUT_jp( - KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, JP_YEN, KC_BSPC, - KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_ENT, - KC_LCTL, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_BSLS, - KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, JP_UNDS, KC_UP, KC_RSFT, - MO(1), JP_ZKHK, KC_LGUI, KC_LALT, JP_MHEN, KC_SPC, JP_HENK, JP_KANA, KC_RALT, MO(1), KC_LEFT, KC_DOWN, KC_RGHT), + KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, JP_YEN, KC_BSPC, + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, + KC_LCTL, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_BSLS, KC_ENT, + KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, JP_UNDS, KC_UP, KC_RSFT, + MO(1), JP_ZKHK, KC_LGUI, KC_LALT, JP_MHEN, KC_SPC, JP_HENK, JP_KANA, KC_RALT, MO(1), KC_LEFT, KC_DOWN, KC_RGHT), [1] = LAYOUT_jp( - _______, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_INS, KC_DEL, - KC_CAPS, _______, _______, _______, _______, _______, _______, _______, KC_PSCR, KC_SCRL, KC_PAUS, KC_UP, _______, KC_PENT, - _______, KC_VOLD, KC_VOLU, KC_MUTE, _______, _______, KC_PAST, KC_PSLS, KC_HOME, KC_PGUP, KC_LEFT, KC_RGHT, _______, + _______, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_INS, KC_DEL, + KC_CAPS, _______, _______, _______, _______, _______, _______, _______, KC_PSCR, KC_SCRL, KC_PAUS, KC_UP, _______, + _______, KC_VOLD, KC_VOLU, KC_MUTE, _______, _______, KC_PAST, KC_PSLS, KC_HOME, KC_PGUP, KC_LEFT, KC_RGHT, _______, KC_PENT, _______, _______, _______, _______, _______, _______, KC_PPLS, KC_PMNS, KC_END, KC_PGDN, KC_DOWN, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, MO(2), _______, _______, _______, _______), [2] = LAYOUT_jp( RGB_TOG, RGB_VAD, RGB_VAI, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, QK_BOOT, - _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______), [3] = LAYOUT_jp( _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, - _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______) // clang-format on }; diff --git a/keyboards/cipulot/kallos/config.h b/keyboards/cipulot/kallos/config.h index bb51142311..546d3a9520 100644 --- a/keyboards/cipulot/kallos/config.h +++ b/keyboards/cipulot/kallos/config.h @@ -18,7 +18,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #pragma once /* Lightbar pin and LED count definitions*/ -#define RGBLED_NUM 13 #define RGBLIGHT_EFFECT_BREATHING #define RGBLIGHT_EFFECT_RAINBOW_MOOD #define RGBLIGHT_EFFECT_RAINBOW_SWIRL diff --git a/keyboards/cipulot/kallos/info.json b/keyboards/cipulot/kallos/info.json index f9fd74acfe..186f98578a 100644 --- a/keyboards/cipulot/kallos/info.json +++ b/keyboards/cipulot/kallos/info.json @@ -8,6 +8,9 @@ "pid": "0x6B7A", "device_version": "0.0.1" }, + "rgblight": { + "led_count": 13 + }, "ws2812": { "pin": "D0" }, diff --git a/keyboards/citrus/erdnuss65/rules.mk b/keyboards/citrus/erdnuss65/rules.mk index 80b5a0b8f5..e69de29bb2 100644 --- a/keyboards/citrus/erdnuss65/rules.mk +++ b/keyboards/citrus/erdnuss65/rules.mk @@ -1,2 +0,0 @@ -# Enter lower-power sleep mode when on the ChibiOS idle thread -OPT_DEFS += -DCORTEX_ENABLE_WFI_IDLE=TRUE
\ No newline at end of file diff --git a/keyboards/ck60i/config.h b/keyboards/ck60i/config.h index 07c7421d25..b34fb3e42f 100644 --- a/keyboards/ck60i/config.h +++ b/keyboards/ck60i/config.h @@ -26,8 +26,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. /* Locking resynchronize hack */ #define LOCKING_RESYNC_ENABLE -#define RGBLED_NUM 16 -#define RGBLIGHT_SLEEP #define RGBLIGHT_EFFECT_BREATHING #define RGBLIGHT_EFFECT_RAINBOW_MOOD #define RGBLIGHT_EFFECT_RAINBOW_SWIRL diff --git a/keyboards/ck60i/info.json b/keyboards/ck60i/info.json index 38ae378ef4..bef7d850e8 100644 --- a/keyboards/ck60i/info.json +++ b/keyboards/ck60i/info.json @@ -24,7 +24,9 @@ "breathing": true }, "rgblight": { - "max_brightness": 200 + "led_count": 16, + "max_brightness": 200, + "sleep": true }, "ws2812": { "pin": "B15" diff --git a/keyboards/ck60i/rules.mk b/keyboards/ck60i/rules.mk index e505cf44b4..3ec023e5e8 100644 --- a/keyboards/ck60i/rules.mk +++ b/keyboards/ck60i/rules.mk @@ -11,5 +11,3 @@ BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality RGBLIGHT_ENABLE = yes # Enable keyboard RGB underglow ENCODER_ENABLE = yes -# Enter lower-power sleep mode when on the ChibiOS idle thread -OPT_DEFS += -DCORTEX_ENABLE_WFI_IDLE=TRUE diff --git a/keyboards/ckeys/washington/keymaps/default/keymap.c b/keyboards/ckeys/washington/keymaps/default/keymap.c index 9ce0181fe4..8e1eb0e272 100644 --- a/keyboards/ckeys/washington/keymaps/default/keymap.c +++ b/keyboards/ckeys/washington/keymaps/default/keymap.c @@ -75,10 +75,10 @@ bool oled_task_user(void) { } // Host Keyboard LED Status - uint8_t usb_led = host_keyboard_leds(); - oled_write_P(IS_LED_ON(usb_led, USB_LED_NUM_LOCK) ? PSTR("NUMLCK ") : PSTR(" "), false); - oled_write_P(IS_LED_ON(usb_led, USB_LED_CAPS_LOCK) ? PSTR("CAPLCK ") : PSTR(" "), false); - oled_write_P(IS_LED_ON(usb_led, USB_LED_SCROLL_LOCK) ? PSTR("SCRLCK ") : PSTR(" "), false); + led_t led_state = host_keyboard_led_state(); + oled_write_P(led_state.num_lock ? PSTR("NUMLCK ") : PSTR(" "), false); + oled_write_P(led_state.caps_lock ? PSTR("CAPLCK ") : PSTR(" "), false); + oled_write_P(led_state.scroll_lock ? PSTR("SCRLCK ") : PSTR(" "), false); return false; } #endif diff --git a/keyboards/clickety_split/leeloo/info.json b/keyboards/clickety_split/leeloo/info.json index 78794cbddb..a2510f9f7f 100644 --- a/keyboards/clickety_split/leeloo/info.json +++ b/keyboards/clickety_split/leeloo/info.json @@ -28,6 +28,9 @@ } } }, + "tapping": { + "term": 100 + }, "processor": "atmega32u4", "bootloader": "caterina", "layouts": { diff --git a/keyboards/clickety_split/leeloo/rev1/config.h b/keyboards/clickety_split/leeloo/rev1/config.h deleted file mode 100644 index 96c6b71d37..0000000000 --- a/keyboards/clickety_split/leeloo/rev1/config.h +++ /dev/null @@ -1,37 +0,0 @@ -/* Copyright 2022 Clickety Split Ltd. - * https://clicketysplit.ca - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see <http://www.gnu.org/licenses/>. - */ - -#pragma once - -/* define tapping term */ -#define TAPPING_TERM 100 - -/* disable action features */ -//#define NO_ACTION_LAYER -//#define NO_ACTION_TAPPING -//#define NO_ACTION_ONESHOT - -/* - * Feature disable options - * These options are also useful to firmware size reduction. - */ - -/* disable debug print */ -// #define NO_DEBUG - -/* disable print */ -// #define NO_PRINT diff --git a/keyboards/cmm_studio/fuji65/config.h b/keyboards/cmm_studio/fuji65/config.h index 2460cac2cb..2bfbbc195a 100644 --- a/keyboards/cmm_studio/fuji65/config.h +++ b/keyboards/cmm_studio/fuji65/config.h @@ -16,11 +16,6 @@ #pragma once - #define RGBLED_NUM 8 - #define RGBLIGHT_HUE_STEP 8 - #define RGBLIGHT_SAT_STEP 8 - #define RGBLIGHT_VAL_STEP 8 - #define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */ #define RGBLIGHT_EFFECT_BREATHING #define RGBLIGHT_EFFECT_RAINBOW_MOOD #define RGBLIGHT_EFFECT_RAINBOW_SWIRL diff --git a/keyboards/cmm_studio/fuji65/info.json b/keyboards/cmm_studio/fuji65/info.json index 2225bedad3..73f1bb5298 100644 --- a/keyboards/cmm_studio/fuji65/info.json +++ b/keyboards/cmm_studio/fuji65/info.json @@ -8,6 +8,12 @@ "pid": "0x364D", "device_version": "0.0.1" }, + "rgblight": { + "saturation_steps": 8, + "brightness_steps": 8, + "led_count": 8, + "sleep": true + }, "ws2812": { "pin": "E6" }, diff --git a/keyboards/coarse/cordillera/rules.mk b/keyboards/coarse/cordillera/rules.mk index 6e8451b10c..d6cd9d5f0d 100644 --- a/keyboards/coarse/cordillera/rules.mk +++ b/keyboards/coarse/cordillera/rules.mk @@ -11,5 +11,3 @@ BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow AUDIO_ENABLE = no # Audio output -# Enter lower-power sleep mode when on the ChibiOS idle thread -OPT_DEFS += -DCORTEX_ENABLE_WFI_IDLE=TRUE diff --git a/keyboards/coarse/ixora/rules.mk b/keyboards/coarse/ixora/rules.mk index ff4c3156fe..af1134ce29 100644 --- a/keyboards/coarse/ixora/rules.mk +++ b/keyboards/coarse/ixora/rules.mk @@ -11,5 +11,3 @@ NKRO_ENABLE = yes # Enable N-Key Rollover NO_USB_STARTUP_CHECK = no # Disable initialization only when usb is plugged in -# Enter lower-power sleep mode when on the ChibiOS idle thread -OPT_DEFS += -DCORTEX_ENABLE_WFI_IDLE=TRUE diff --git a/keyboards/coarse/vinta/rules.mk b/keyboards/coarse/vinta/rules.mk index 88f853eb44..cedbfeb321 100644 --- a/keyboards/coarse/vinta/rules.mk +++ b/keyboards/coarse/vinta/rules.mk @@ -10,5 +10,3 @@ COMMAND_ENABLE = no # Commands for debug and configuration NKRO_ENABLE = yes # Enable N-Key Rollover NO_USB_STARTUP_CHECK = no # Disable initialization only when usb is plugged in -# Enter lower-power sleep mode when on the ChibiOS idle thread -OPT_DEFS += -DCORTEX_ENABLE_WFI_IDLE=TRUE diff --git a/keyboards/coban/pad3a/config.h b/keyboards/coban/pad3a/config.h index 9483086fb4..5299ccb4f1 100644 --- a/keyboards/coban/pad3a/config.h +++ b/keyboards/coban/pad3a/config.h @@ -16,8 +16,5 @@ #pragma once -#define ENCODERS_PAD_A { GP5 } -#define ENCODERS_PAD_B { GP4 } - #define RP2040_BOOTLOADER_DOUBLE_TAP_RESET #define RP2040_BOOTLOADER_DOUBLE_TAP_RESET_TIMEOUT 500U diff --git a/keyboards/coban/pad3a/info.json b/keyboards/coban/pad3a/info.json index 3eadcb7f50..fc5c8ee71e 100644 --- a/keyboards/coban/pad3a/info.json +++ b/keyboards/coban/pad3a/info.json @@ -9,6 +9,11 @@ "vid": "0xCB3A", "device_version": "1.1.0" }, + "encoder": { + "rotary": [ + {"pin_a": "GP5", "pin_b": "GP4"} + ] + }, "matrix_pins": { "direct": [ ["GP8", "GP7", "GP6"] diff --git a/keyboards/contender/config.h b/keyboards/contender/config.h index 971253f396..56aa0f3e5c 100644 --- a/keyboards/contender/config.h +++ b/keyboards/contender/config.h @@ -17,19 +17,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #pragma once -#define RGBLED_NUM 33 -#define RGBLIGHT_LED_MAP { \ - 0, 1, 2, 3, \ - 7, 6, 5, 4, \ - 8, 9, 10, 11, \ - 15, 14, 13, 12, \ - 16, 17, 18, 19, \ - 22, 21, 20, \ - 25, 24, 23, 26, 27, 28, 29, 30, 31, 32 } -#define RGBLIGHT_HUE_STEP 8 -#define RGBLIGHT_SAT_STEP 8 -#define RGBLIGHT_VAL_STEP 8 -#define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */ #define RGBLIGHT_EFFECT_BREATHING #define RGBLIGHT_EFFECT_RAINBOW_MOOD #define RGBLIGHT_EFFECT_RAINBOW_SWIRL diff --git a/keyboards/contender/info.json b/keyboards/contender/info.json index 8a81ae164d..e9de10100d 100644 --- a/keyboards/contender/info.json +++ b/keyboards/contender/info.json @@ -12,7 +12,12 @@ "pin": "C6" }, "rgblight": { - "max_brightness": 32 + "saturation_steps": 8, + "brightness_steps": 8, + "led_count": 33, + "max_brightness": 32, + "sleep": true, + "led_map": [0, 1, 2, 3, 7, 6, 5, 4, 8, 9, 10, 11, 15, 14, 13, 12, 16, 17, 18, 19, 22, 21, 20, 25, 24, 23, 26, 27, 28, 29, 30, 31, 32] }, "matrix_pins": { "cols": ["C7", "D6", "B3", "B0", "B1"], diff --git a/keyboards/contra/keymaps/bramver/README.md b/keyboards/contra/keymaps/bramver/README.md index 3c7028a933..c5a887ce2c 100644 --- a/keyboards/contra/keymaps/bramver/README.md +++ b/keyboards/contra/keymaps/bramver/README.md @@ -22,9 +22,9 @@ LOWER layer { _______ , _______ , _______ , _______ , _______ , _______ , _______ , _______ , _______ , _______ , _______ , _______ }, EMOJI layer - { _______ , X(CLAP) , X(CUM) , X(BNIS) , X(BUTT) , X(CAR) , X(FIRE) , X(REDB) , X(MONY) , X(HNDR) , X(SOS) , _______ }, - { _______ , X(CELE) , X(PRAY) , X(NAIL) , X(OK) , X(THNK) , X(UNAM) , X(HEYE) , X(COOL) , X(EYES) , X(SMIR) , _______ }, - { _______ , X(TRIU) , X(SCRM) , X(VOMI) , X(DTIV) , X(EXPL) , X(HAIR) , X(DANC) , X(STRN) , X(LEFT) , X(RGHT) , _______ }, + { _______ , UM(CLAP) , UM(CUM) , UM(BNIS) , UM(BUTT) , UM(CAR) , UM(FIRE) , UM(REDB) , UM(MONY) , UM(HNDR) , UM(SOS) , _______ }, + { _______ , UM(CELE) , UM(PRAY) , UM(NAIL) , UM(OK) , UM(THNK) , UM(UNAM) , UM(HEYE) , UM(COOL) , UM(EYES) , UM(SMIR) , _______ }, + { _______ , UM(TRIU) , UM(SCRM) , UM(VOMI) , UM(DTIV) , UM(EXPL) , UM(HAIR) , UM(DANC) , UM(STRN) , UM(LEFT) , UM(RGHT) , _______ }, { _______ , _______ , _______ , _______ , _______ , _______ , _______ , _______ , _______ , _______ , _______ , _______ }, MOUSE layer diff --git a/keyboards/contra/keymaps/bramver/keymap.c b/keyboards/contra/keymaps/bramver/keymap.c index 3816ee629e..08f25119c2 100644 --- a/keyboards/contra/keymaps/bramver/keymap.c +++ b/keyboards/contra/keymaps/bramver/keymap.c @@ -106,9 +106,9 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { ), [_EMOJI] = LAYOUT_ortho_4x12( - _______ , X(CLAP) , X(CUM) , X(BNIS) , X(BUTT) , X(CAR) , X(FIRE) , X(REDB) , X(MONY) , X(HNDR) , X(SOS) , _______ , - _______ , X(CELE) , X(PRAY) , X(NAIL) , X(OK) , X(THNK) , X(UNAM) , X(HEYE) , X(COOL) , X(EYES) , X(SMIR) , _______ , - _______ , X(TRIU) , X(SCRM) , X(VOMI) , X(DTIV) , X(EXPL) , X(HAIR) , X(DANC) , X(STRN) , X(LEFT) , X(RGHT) , _______ , + _______ , UM(CLAP) , UM(CUM) , UM(BNIS) , UM(BUTT) , UM(CAR) , UM(FIRE) , UM(REDB) , UM(MONY) , UM(HNDR) , UM(SOS) , _______ , + _______ , UM(CELE) , UM(PRAY) , UM(NAIL) , UM(OK) , UM(THNK) , UM(UNAM) , UM(HEYE) , UM(COOL) , UM(EYES) , UM(SMIR) , _______ , + _______ , UM(TRIU) , UM(SCRM) , UM(VOMI) , UM(DTIV) , UM(EXPL) , UM(HAIR) , UM(DANC) , UM(STRN) , UM(LEFT) , UM(RGHT) , _______ , _______ , _______ , _______ , _______ , _______ , _______ , _______ , _______ , _______ , _______ , _______ , _______ ), diff --git a/keyboards/contra/keymaps/maxr1998/keymap.c b/keyboards/contra/keymaps/maxr1998/keymap.c index 8a56c60746..0802a211f0 100644 --- a/keyboards/contra/keymaps/maxr1998/keymap.c +++ b/keyboards/contra/keymaps/maxr1998/keymap.c @@ -176,10 +176,11 @@ void update_tri_layer_user(void) { } } -void led_set_user(uint8_t usb_led) { +bool led_update_user(led_t led_state) { // Force-enable Numlock - if (!(usb_led & (1<<USB_LED_NUM_LOCK))) { + if (!led_state.num_lock) { register_code(KC_NUM_LOCK); unregister_code(KC_NUM_LOCK); } + return false; } diff --git a/keyboards/controllerworks/mini36/config.h b/keyboards/controllerworks/mini36/config.h index c9da0d411b..3a094c2fd1 100644 --- a/keyboards/controllerworks/mini36/config.h +++ b/keyboards/controllerworks/mini36/config.h @@ -18,8 +18,7 @@ #pragma once #define WS2812_PIO_USE_PIO1 -#define RGBLED_NUM 48 -#define RGB_MATRIX_LED_COUNT RGBLED_NUM +#define RGB_MATRIX_LED_COUNT 48 #define RGB_MATRIX_SPLIT \ { 24, 24 } diff --git a/keyboards/controllerworks/mini42/config.h b/keyboards/controllerworks/mini42/config.h index 0a4d8c84b7..e7fc529592 100644 --- a/keyboards/controllerworks/mini42/config.h +++ b/keyboards/controllerworks/mini42/config.h @@ -18,8 +18,7 @@ #pragma once #define WS2812_PIO_USE_PIO1 -#define RGBLED_NUM 54 -#define RGB_MATRIX_LED_COUNT RGBLED_NUM +#define RGB_MATRIX_LED_COUNT 54 #define SPLIT_TRANSPORT_MIRROR #define SPLIT_LAYER_STATE_ENABLE diff --git a/keyboards/converter/a1200/mistress1200/config.h b/keyboards/converter/a1200/mistress1200/config.h index 21ba99e0b7..bc137dc185 100644 --- a/keyboards/converter/a1200/mistress1200/config.h +++ b/keyboards/converter/a1200/mistress1200/config.h @@ -17,8 +17,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #pragma once -#define TAPPING_TOGGLE 3 - #undef LOCKING_SUPPORT_ENABLE #undef LOCKING_RESYNC_ENABLE #define LAYER_STATE_8BIT diff --git a/keyboards/converter/a1200/mistress1200/info.json b/keyboards/converter/a1200/mistress1200/info.json index c37bdadd61..28de092b3d 100644 --- a/keyboards/converter/a1200/mistress1200/info.json +++ b/keyboards/converter/a1200/mistress1200/info.json @@ -16,5 +16,8 @@ "on_state": 0 }, "processor": "atmega16u4", - "bootloader": "atmel-dfu" + "bootloader": "atmel-dfu", + "tapping": { + "toggle": 3 + } } diff --git a/keyboards/converter/ibm_terminal/keymaps/priyadi/keymap.c b/keyboards/converter/ibm_terminal/keymaps/priyadi/keymap.c index 0e11fa6779..3645dd7da7 100644 --- a/keyboards/converter/ibm_terminal/keymaps/priyadi/keymap.c +++ b/keyboards/converter/ibm_terminal/keymaps/priyadi/keymap.c @@ -226,9 +226,9 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, - XXXXXXX, XXXXXXX, XXXXXXX, X(CRY2),X(WEARY),X(EYERT),X(SMIRK), X(TJOY), X(RECYC),X(UNAMU),X(MUSIC),X(OKHND),X(PENSV),XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, - XXXXXXX, XXXXXXX, XXXXXXX, X(PRAY),X(SMILE),X(SMIL2),X(FLUSH), X(GRIN), X(HEART),X(BYE), X(KISS), X(CELEB),X(COOL), XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, - XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX,X(SLEEP),X(CLAP), X(CRY), X(VIC), X(BHART),X(SUN), X(SMEYE),X(WINK), X(MOON), X(CONFU), XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, + XXXXXXX, XXXXXXX, XXXXXXX, UM(CRY2),UM(WEARY),UM(EYERT),UM(SMIRK), UM(TJOY), UM(RECYC),UM(UNAMU),UM(MUSIC),UM(OKHND),UM(PENSV),XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, + XXXXXXX, XXXXXXX, XXXXXXX, UM(PRAY),UM(SMILE),UM(SMIL2),UM(FLUSH), UM(GRIN), UM(HEART),UM(BYE), UM(KISS), UM(CELEB),UM(COOL), XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, + XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX,UM(SLEEP),UM(CLAP), UM(CRY), UM(VIC), UM(BHART),UM(SUN), UM(SMEYE),UM(WINK), UM(MOON), UM(CONFU), XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX ), diff --git a/keyboards/converter/ibm_terminal/led.c b/keyboards/converter/ibm_terminal/led.c index e0f31ee4e1..1bcde277a2 100644 --- a/keyboards/converter/ibm_terminal/led.c +++ b/keyboards/converter/ibm_terminal/led.c @@ -20,14 +20,15 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #include "led.h" -void led_set(uint8_t usb_led) +bool led_update_kb(led_t led_state) { uint8_t ps2_led = 0; - if (usb_led & (1<<USB_LED_SCROLL_LOCK)) + if (led_state.scroll_lock) ps2_led |= (1<<PS2_LED_SCROLL_LOCK); - if (usb_led & (1<<USB_LED_NUM_LOCK)) + if (led_state.num_lock) ps2_led |= (1<<PS2_LED_NUM_LOCK); - if (usb_led & (1<<USB_LED_CAPS_LOCK)) + if (led_state.caps_lock) ps2_led |= (1<<PS2_LED_CAPS_LOCK); ps2_host_set_led(ps2_led); + return false; } diff --git a/keyboards/converter/numeric_keypad_iie/keymaps/newbold/keymap.c b/keyboards/converter/numeric_keypad_iie/keymaps/newbold/keymap.c index 58d23d2566..5664628376 100644 --- a/keyboards/converter/numeric_keypad_iie/keymaps/newbold/keymap.c +++ b/keyboards/converter/numeric_keypad_iie/keymaps/newbold/keymap.c @@ -46,23 +46,3 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, QK_BOOT ), }; - -bool process_record_user(uint16_t keycode, keyrecord_t *record) { - return true; -} - -void keyboard_post_init_user(void) { - -} - -void matrix_init_user(void) { - -} - -void matrix_scan_user(void) { - -} - -void led_set_user(uint8_t usb_led) { - -} diff --git a/keyboards/converter/siemens_tastatur/keymaps/default/keymap.c b/keyboards/converter/siemens_tastatur/keymaps/default/keymap.c index 0ce8a64ab7..0f3911a2d3 100644 --- a/keyboards/converter/siemens_tastatur/keymaps/default/keymap.c +++ b/keyboards/converter/siemens_tastatur/keymaps/default/keymap.c @@ -51,10 +51,11 @@ void matrix_init_user(void) { writePinLow(B0); } -void led_set_user(uint8_t usb_led) { - if (IS_LED_ON(usb_led, USB_LED_CAPS_LOCK)) { +bool led_update_user(led_t led_state) { + if (led_state.caps_lock) { writePinHigh(B0); } else { writePinLow(B0); } + return false; } diff --git a/keyboards/converter/siemens_tastatur/rules.mk b/keyboards/converter/siemens_tastatur/rules.mk index bd42622805..1bc8ee188b 100644 --- a/keyboards/converter/siemens_tastatur/rules.mk +++ b/keyboards/converter/siemens_tastatur/rules.mk @@ -15,5 +15,3 @@ SLEEP_LED_ENABLE = yes CUSTOM_MATRIX = yes -# Enter lower-power sleep mode when on the ChibiOS idle thread -OPT_DEFS += -DCORTEX_ENABLE_WFI_IDLE=TRUE diff --git a/keyboards/converter/sun_usb/led.c b/keyboards/converter/sun_usb/led.c index 493825bac8..160664ffde 100644 --- a/keyboards/converter/sun_usb/led.c +++ b/keyboards/converter/sun_usb/led.c @@ -19,15 +19,18 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #include "print.h" #include "uart.h" -void led_set(uint8_t usb_led) +bool led_update_kb(led_t led_state) { - uint8_t sun_led = 0; - if (usb_led & (1<<USB_LED_NUM_LOCK)) sun_led |= (1<<0); - if (usb_led & (1<<USB_LED_COMPOSE)) sun_led |= (1<<1); - if (usb_led & (1<<USB_LED_SCROLL_LOCK)) sun_led |= (1<<2); - if (usb_led & (1<<USB_LED_CAPS_LOCK)) sun_led |= (1<<3); - xprintf("LED: %02X\n", usb_led); + bool res = led_update_user(led_state); + if (res) { + uint8_t sun_led = 0; + if (led_state.num_lock) sun_led |= (1<<0); + if (led_state.compose) sun_led |= (1<<1); + if (led_state.scroll_lock) sun_led |= (1<<2); + if (led_state.caps_lock) sun_led |= (1<<3); - uart_write(0x0E); - uart_write(sun_led); + uart_write(0x0E); + uart_write(sun_led); + } + return res; } diff --git a/keyboards/converter/usb_usb/keymaps/coloneljesus/keymap.c b/keyboards/converter/usb_usb/keymaps/coloneljesus/keymap.c index 67e1075654..54d39a3e29 100644 --- a/keyboards/converter/usb_usb/keymaps/coloneljesus/keymap.c +++ b/keyboards/converter/usb_usb/keymaps/coloneljesus/keymap.c @@ -65,22 +65,6 @@ const uint16_t keymaps[][MATRIX_ROWS][MATRIX_COLS] PROGMEM = { ), }; -void matrix_init_user(void) { - -} - -void matrix_scan_user(void) { - -} - -bool process_record_user(uint16_t keycode, keyrecord_t *record) { - return true; -} - -void led_set_user(uint8_t usb_led) { - -} - /* * Keymap samples */ diff --git a/keyboards/coseyfannitutti/mullet/config.h b/keyboards/coseyfannitutti/mullet/config.h index 760c1645b0..0647b48680 100644 --- a/keyboards/coseyfannitutti/mullet/config.h +++ b/keyboards/coseyfannitutti/mullet/config.h @@ -27,11 +27,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #define RGBLIGHT_EFFECT_RGB_TEST #define RGBLIGHT_EFFECT_ALTERNATING #define RGBLIGHT_EFFECT_TWINKLE -#define RGBLED_NUM 14 -#define RGBLIGHT_HUE_STEP 8 -#define RGBLIGHT_SAT_STEP 8 -#define RGBLIGHT_VAL_STEP 8 -#define RGBLIGHT_SLEEP /* * Feature disable options diff --git a/keyboards/coseyfannitutti/mullet/info.json b/keyboards/coseyfannitutti/mullet/info.json index 695d0729c1..ac2424f28f 100644 --- a/keyboards/coseyfannitutti/mullet/info.json +++ b/keyboards/coseyfannitutti/mullet/info.json @@ -8,6 +8,12 @@ "pid": "0x6969", "device_version": "0.0.1" }, + "rgblight": { + "saturation_steps": 8, + "brightness_steps": 8, + "led_count": 14, + "sleep": true + }, "ws2812": { "pin": "D5" }, diff --git a/keyboards/cosmo65/config.h b/keyboards/cosmo65/config.h index c97f9dbac4..1d30de51db 100644 --- a/keyboards/cosmo65/config.h +++ b/keyboards/cosmo65/config.h @@ -16,7 +16,6 @@ along with this program. If not, see http://www.gnu.org/licenses/. /* RGB Lighting */ -#define RGBLED_NUM 16 #define RGBLIGHT_EFFECT_BREATHING #define RGBLIGHT_EFFECT_RAINBOW_MOOD #define RGBLIGHT_EFFECT_RAINBOW_SWIRL diff --git a/keyboards/cosmo65/info.json b/keyboards/cosmo65/info.json index d20de266e4..00d6efe855 100644 --- a/keyboards/cosmo65/info.json +++ b/keyboards/cosmo65/info.json @@ -8,6 +8,9 @@ "pid": "0x6331", "device_version": "0.0.1" }, + "rgblight": { + "led_count": 16 + }, "ws2812": { "pin": "F7" }, diff --git a/keyboards/cozykeys/bloomer/config.h b/keyboards/cozykeys/bloomer/config.h index 44f6aa3613..6a93b53f15 100644 --- a/keyboards/cozykeys/bloomer/config.h +++ b/keyboards/cozykeys/bloomer/config.h @@ -19,11 +19,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. // Enable RGB backlight #ifdef RGBLIGHT_ENABLE -#define RGBLED_NUM 12 -#define RGBLIGHT_HUE_STEP 8 -#define RGBLIGHT_SAT_STEP 8 -#define RGBLIGHT_VAL_STEP 8 -#define RGBLIGHT_SLEEP #define RGBLIGHT_EFFECT_BREATHING #define RGBLIGHT_EFFECT_RAINBOW_MOOD #define RGBLIGHT_EFFECT_RAINBOW_SWIRL diff --git a/keyboards/cozykeys/bloomer/info.json b/keyboards/cozykeys/bloomer/info.json index 96db04787e..622d5054be 100644 --- a/keyboards/cozykeys/bloomer/info.json +++ b/keyboards/cozykeys/bloomer/info.json @@ -7,6 +7,12 @@ "vid": "0xFEED", "pid": "0x1191" }, + "rgblight": { + "saturation_steps": 8, + "brightness_steps": 8, + "led_count": 12, + "sleep": true + }, "ws2812": { "pin": "D7" } diff --git a/keyboards/cozykeys/speedo/v3/config.h b/keyboards/cozykeys/speedo/v3/config.h index 8a13e5e509..eb22271aa3 100644 --- a/keyboards/cozykeys/speedo/v3/config.h +++ b/keyboards/cozykeys/speedo/v3/config.h @@ -17,11 +17,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #pragma once #ifdef RGBLIGHT_ENABLE -#define RGBLED_NUM 12 -#define RGBLIGHT_HUE_STEP 8 -#define RGBLIGHT_SAT_STEP 8 -#define RGBLIGHT_VAL_STEP 8 -#define RGBLIGHT_SLEEP #define RGBLIGHT_EFFECT_BREATHING #define RGBLIGHT_EFFECT_RAINBOW_MOOD #define RGBLIGHT_EFFECT_RAINBOW_SWIRL diff --git a/keyboards/cozykeys/speedo/v3/info.json b/keyboards/cozykeys/speedo/v3/info.json index d368fd25fc..fe275aa449 100644 --- a/keyboards/cozykeys/speedo/v3/info.json +++ b/keyboards/cozykeys/speedo/v3/info.json @@ -8,6 +8,12 @@ "pid": "0x1192", "device_version": "0.0.3" }, + "rgblight": { + "saturation_steps": 8, + "brightness_steps": 8, + "led_count": 12, + "sleep": true + }, "ws2812": { "pin": "B5" }, diff --git a/keyboards/craftwalk/config.h b/keyboards/craftwalk/config.h index 40d79db10c..f0b96679b8 100644 --- a/keyboards/craftwalk/config.h +++ b/keyboards/craftwalk/config.h @@ -17,11 +17,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #pragma once - #define RGBLED_NUM 19 - #define RGBLIGHT_HUE_STEP 8 - #define RGBLIGHT_SAT_STEP 8 - #define RGBLIGHT_VAL_STEP 8 - #define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */ // /*== or choose animations ==*/ #define RGBLIGHT_EFFECT_BREATHING #define RGBLIGHT_EFFECT_RAINBOW_MOOD diff --git a/keyboards/craftwalk/info.json b/keyboards/craftwalk/info.json index b3f3fbbe57..8d5bea014d 100644 --- a/keyboards/craftwalk/info.json +++ b/keyboards/craftwalk/info.json @@ -8,6 +8,12 @@ "pid": "0x2E8F", "device_version": "0.0.1" }, + "rgblight": { + "saturation_steps": 8, + "brightness_steps": 8, + "led_count": 19, + "sleep": true + }, "ws2812": { "pin": "D3" }, diff --git a/keyboards/crawlpad/config.h b/keyboards/crawlpad/config.h index 4378435471..64a378d399 100755 --- a/keyboards/crawlpad/config.h +++ b/keyboards/crawlpad/config.h @@ -25,5 +25,4 @@ #define RGBLIGHT_EFFECT_RGB_TEST #define RGBLIGHT_EFFECT_ALTERNATING #define RGBLIGHT_EFFECT_TWINKLE -#define RGBLED_NUM 3 #endif diff --git a/keyboards/crawlpad/info.json b/keyboards/crawlpad/info.json index 0d4d38d4ea..4f40504059 100644 --- a/keyboards/crawlpad/info.json +++ b/keyboards/crawlpad/info.json @@ -8,6 +8,9 @@ "pid": "0x6070", "device_version": "0.0.1" }, + "rgblight": { + "led_count": 3 + }, "ws2812": { "pin": "D3" }, diff --git a/keyboards/crazy_keyboard_68/config.h b/keyboards/crazy_keyboard_68/config.h index 50fbb5dcb9..6e2fa77af6 100644 --- a/keyboards/crazy_keyboard_68/config.h +++ b/keyboards/crazy_keyboard_68/config.h @@ -17,11 +17,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #pragma once -# define RGBLED_NUM 84 -# define RGBLIGHT_HUE_STEP 8 -# define RGBLIGHT_SAT_STEP 8 -# define RGBLIGHT_VAL_STEP 8 -# define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */ # define RGBLIGHT_EFFECT_BREATHING # define RGBLIGHT_EFFECT_RAINBOW_MOOD # define RGBLIGHT_EFFECT_RAINBOW_SWIRL diff --git a/keyboards/crazy_keyboard_68/info.json b/keyboards/crazy_keyboard_68/info.json index 5e7416545d..527306f032 100644 --- a/keyboards/crazy_keyboard_68/info.json +++ b/keyboards/crazy_keyboard_68/info.json @@ -17,6 +17,12 @@ "caps_lock": "B0", "on_state": 0 }, + "rgblight": { + "saturation_steps": 8, + "brightness_steps": 8, + "led_count": 84, + "sleep": true + }, "ws2812": { "pin": "F6" }, diff --git a/keyboards/crin/rules.mk b/keyboards/crin/rules.mk index 0aeca0dd9f..7f4f202a1b 100644 --- a/keyboards/crin/rules.mk +++ b/keyboards/crin/rules.mk @@ -11,5 +11,3 @@ BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow AUDIO_ENABLE = no # Audio output -# Enter lower-power sleep mode when on the ChibiOS idle thread -OPT_DEFS += -DCORTEX_ENABLE_WFI_IDLE=TRUE diff --git a/keyboards/crkbd/keymaps/oled_sample/keymap.c b/keyboards/crkbd/keymaps/oled_sample/keymap.c index 1a48165e3f..84a4f9204f 100644 --- a/keyboards/crkbd/keymaps/oled_sample/keymap.c +++ b/keyboards/crkbd/keymaps/oled_sample/keymap.c @@ -147,12 +147,12 @@ void render_layer_state(void) { oled_write_P(PSTR("Raise"), layer_state_is(_RAISE)); } -void render_keylock_status(uint8_t led_usb_state) { +void render_keylock_status(led_t led_state) { oled_write_P(PSTR("Lock:"), false); oled_write_P(PSTR(" "), false); - oled_write_P(PSTR("N"), led_usb_state & (1 << USB_LED_NUM_LOCK)); - oled_write_P(PSTR("C"), led_usb_state & (1 << USB_LED_CAPS_LOCK)); - oled_write_ln_P(PSTR("S"), led_usb_state & (1 << USB_LED_SCROLL_LOCK)); + oled_write_P(PSTR("N"), led_state.num_lock); + oled_write_P(PSTR("C"), led_state.caps_lock); + oled_write_ln_P(PSTR("S"), led_state.scroll_lock); } void render_mod_status(uint8_t modifiers) { @@ -183,7 +183,7 @@ void render_bootmagic_status(void) { void render_status_main(void) { /* Show Keyboard Layout */ render_default_layer_state(); - render_keylock_status(host_keyboard_leds()); + render_keylock_status(host_keyboard_led_state()); render_mod_status(get_mods()); render_bootmagic_status(); diff --git a/keyboards/crkbd/keymaps/rpbaptist/keymap.c b/keyboards/crkbd/keymaps/rpbaptist/keymap.c index aeeae2cbd8..0fc110b12e 100644 --- a/keyboards/crkbd/keymaps/rpbaptist/keymap.c +++ b/keyboards/crkbd/keymaps/rpbaptist/keymap.c @@ -266,10 +266,10 @@ void render_status(void) { oled_write_P(PSTR("\n"), false); - uint8_t led_usb_state = host_keyboard_leds(); + led_t led_state = host_keyboard_led_state(); oled_write_P(PSTR("Mode:"), false); - oled_write_P(IS_LED_ON(led_usb_state, USB_LED_NUM_LOCK) ? PSTR(" NUM ") : PSTR("\n"), false); - oled_write_P(IS_LED_ON(led_usb_state, USB_LED_CAPS_LOCK) ? PSTR(" CAPS") : PSTR("\n"), false); + oled_write_P(led_state.num_lock ? PSTR(" NUM ") : PSTR("\n"), false); + oled_write_P(led_state.caps_lock ? PSTR(" CAPS") : PSTR("\n"), false); # ifdef RGB_MATRIX_ENABLE oled_write_P(PSTR("\n"), false); diff --git a/keyboards/crkbd/lib/host_led_state_reader.c b/keyboards/crkbd/lib/host_led_state_reader.c index a0684e4a27..2593ac5f8b 100644 --- a/keyboards/crkbd/lib/host_led_state_reader.c +++ b/keyboards/crkbd/lib/host_led_state_reader.c @@ -5,11 +5,11 @@ char host_led_state_str[24]; const char *read_host_led_state(void) { - uint8_t leds = host_keyboard_leds(); + led_t led_state = host_keyboard_led_state(); snprintf(host_led_state_str, sizeof(host_led_state_str), "NL:%s CL:%s SL:%s", - (leds & (1 << USB_LED_NUM_LOCK)) ? "on" : "- ", - (leds & (1 << USB_LED_CAPS_LOCK)) ? "on" : "- ", - (leds & (1 << USB_LED_SCROLL_LOCK)) ? "on" : "- "); + (led_state.num_lock) ? "on" : "- ", + (led_state.caps_lock) ? "on" : "- ", + (led_state.scroll_lock) ? "on" : "- "); return host_led_state_str; } diff --git a/keyboards/crkbd/r2g/config.h b/keyboards/crkbd/r2g/config.h index e44626739d..46db11318f 100644 --- a/keyboards/crkbd/r2g/config.h +++ b/keyboards/crkbd/r2g/config.h @@ -31,15 +31,10 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. # define RGBLIGHT_EFFECT_RGB_TEST # define RGBLIGHT_EFFECT_ALTERNATING # define RGBLIGHT_EFFECT_TWINKLE - -# define RGBLED_NUM 54 -# define RGBLED_SPLIT \ - { 27, 27 } #endif #ifdef RGB_MATRIX_ENABLE -# define RGBLED_NUM 54 // Number of LEDs -# define RGB_MATRIX_LED_COUNT RGBLED_NUM +# define RGB_MATRIX_LED_COUNT 54 # define RGB_MATRIX_SPLIT \ { 27, 27 } # define SPLIT_TRANSPORT_MIRROR diff --git a/keyboards/crkbd/r2g/info.json b/keyboards/crkbd/r2g/info.json index cfd29368e6..3b269a5051 100644 --- a/keyboards/crkbd/r2g/info.json +++ b/keyboards/crkbd/r2g/info.json @@ -5,6 +5,10 @@ "split": { "soft_serial_pin": "D2" }, + "rgblight": { + "led_count": 54, + "split_count": [27, 27] + }, "ws2812": { "pin": "D3" }, diff --git a/keyboards/crkbd/rev1/config.h b/keyboards/crkbd/rev1/config.h index 2378a8637f..60a49100e3 100644 --- a/keyboards/crkbd/rev1/config.h +++ b/keyboards/crkbd/rev1/config.h @@ -18,16 +18,8 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #pragma once -#ifdef RGBLIGHT_ENABLE -# define RGBLED_NUM 54 // Number of LEDs -# define RGBLED_SPLIT \ - { 27, 27 } -# define RGBLIGHT_SPLIT -#endif - #ifdef RGB_MATRIX_ENABLE -# define RGBLED_NUM 54 // Number of LEDs -# define RGB_MATRIX_LED_COUNT RGBLED_NUM +# define RGB_MATRIX_LED_COUNT 54 # define RGB_MATRIX_SPLIT \ { 27, 27 } # define SPLIT_TRANSPORT_MIRROR diff --git a/keyboards/crkbd/rev1/info.json b/keyboards/crkbd/rev1/info.json index 4f63c95170..48a27d11f3 100644 --- a/keyboards/crkbd/rev1/info.json +++ b/keyboards/crkbd/rev1/info.json @@ -5,6 +5,10 @@ "split": { "soft_serial_pin": "D2" }, + "rgblight": { + "led_count": 54, + "split_count": [27, 27] + }, "ws2812": { "pin": "D3" }, diff --git a/keyboards/crypt_macro/config.h b/keyboards/crypt_macro/config.h index ecdef4acaa..0e47fb3111 100644 --- a/keyboards/crypt_macro/config.h +++ b/keyboards/crypt_macro/config.h @@ -28,10 +28,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #define WS2812_DMA_CHANNEL 3 #define WS2812_BYTE_ORDER WS2812_BYTE_ORDER_RGB -#define RGBLED_NUM 11 -#define RGBLIGHT_HUE_STEP 8 -#define RGBLIGHT_SAT_STEP 8 -#define RGBLIGHT_VAL_STEP 8 #define RGBLIGHT_EFFECT_BREATHING #define RGBLIGHT_EFFECT_RAINBOW_MOOD #define RGBLIGHT_EFFECT_RAINBOW_SWIRL diff --git a/keyboards/crypt_macro/info.json b/keyboards/crypt_macro/info.json index 8dcd2e264e..a7178acf90 100644 --- a/keyboards/crypt_macro/info.json +++ b/keyboards/crypt_macro/info.json @@ -8,6 +8,11 @@ "pid": "0x434D", "device_version": "0.0.1" }, + "rgblight": { + "saturation_steps": 8, + "brightness_steps": 8, + "led_count": 11 + }, "ws2812": { "pin": "B4", "driver": "pwm" diff --git a/keyboards/crypt_macro/rules.mk b/keyboards/crypt_macro/rules.mk index 000ee78e21..cc9d7bb3f5 100644 --- a/keyboards/crypt_macro/rules.mk +++ b/keyboards/crypt_macro/rules.mk @@ -1,11 +1,6 @@ # Wildcard to allow APM32 MCU DFU_SUFFIX_ARGS = -v FFFF -p FFFF -# Do not put the microcontroller into power saving mode -# when we get USB suspend event. We want it to keep updating -# backlight effects. -OPT_DEFS += -DCORTEX_ENABLE_WFI_IDLE=TRUE - # Build Options # change yes to no to disable # diff --git a/keyboards/custommk/ergostrafer/config.h b/keyboards/custommk/ergostrafer/config.h index c5a0ec75b5..9622315def 100644 --- a/keyboards/custommk/ergostrafer/config.h +++ b/keyboards/custommk/ergostrafer/config.h @@ -16,8 +16,6 @@ #define SPI_MISO_PIN B4 #define SPI_MISO_PAL_MODE 5 -#define TAP_CODE_DELAY 10 - // Audio configuration #define AUDIO_PIN B8 #define AUDIO_PWM_DRIVER PWMD4 diff --git a/keyboards/custommk/ergostrafer/info.json b/keyboards/custommk/ergostrafer/info.json index 66f1562fd9..590925065e 100644 --- a/keyboards/custommk/ergostrafer/info.json +++ b/keyboards/custommk/ergostrafer/info.json @@ -79,5 +79,8 @@ { "pin_a": "B12", "pin_b": "B14"}, { "pin_a": "B15", "pin_b": "A15"} ] + }, + "qmk": { + "tap_keycode_delay": 10 } }
\ No newline at end of file diff --git a/keyboards/custommk/evo70/config.h b/keyboards/custommk/evo70/config.h index 3010e4989d..00f78c6339 100644 --- a/keyboards/custommk/evo70/config.h +++ b/keyboards/custommk/evo70/config.h @@ -20,6 +20,4 @@ #define OLED_DISABLE_TIMEOUT -#define TAP_CODE_DELAY 10 - #define RGBLIGHT_DEFAULT_MODE RGBLIGHT_MODE_RAINBOW_SWIRL + 4 diff --git a/keyboards/custommk/evo70/info.json b/keyboards/custommk/evo70/info.json index 769e2e6118..ec65473462 100644 --- a/keyboards/custommk/evo70/info.json +++ b/keyboards/custommk/evo70/info.json @@ -29,6 +29,9 @@ {"pin_a": "C7", "pin_b": "D5", "resolution": 2} ] }, + "qmk": { + "tap_keycode_delay": 10 + }, "backlight": { "pin": "B5", "levels": 17, @@ -143,13 +146,9 @@ {"matrix": [5, 6], "x": 0.5, "y": 1.1}, - {"matrix": [4, 7], "x": 0, "y": 0}, - {"matrix": [4, 8], "x": 12.5, "y": 5.1, "w": 1.25}, {"matrix": [4, 9], "x": 13.75, "y": 5.1, "w": 1.25}, - {"matrix": [4, 10], "x": 1, "y": 0}, - {"matrix": [4, 11], "x": 15.5, "y": 5.1}, {"matrix": [4, 12], "x": 16.5, "y": 5.1}, {"matrix": [4, 13], "x": 17.5, "y": 5.1} diff --git a/keyboards/custommk/evo70/keymaps/default/keymap.c b/keyboards/custommk/evo70/keymaps/default/keymap.c index 6f518dd964..b577b885b2 100644 --- a/keyboards/custommk/evo70/keymaps/default/keymap.c +++ b/keyboards/custommk/evo70/keymaps/default/keymap.c @@ -23,7 +23,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_PGUP, KC_F1, KC_F2, KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, KC_PGDN, KC_F3, KC_F4, KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_UP, KC_END, - KC_F5, KC_F6, KC_LCTL, KC_LWIN, KC_LALT, KC_SPACE, KC_NO, KC_VOLD, KC_RALT, KC_RCTL, KC_VOLU, KC_LEFT, KC_DOWN, KC_RGHT + KC_F5, KC_F6, KC_LCTL, KC_LWIN, KC_LALT, KC_SPACE, KC_NO, KC_RALT, KC_RCTL, KC_LEFT, KC_DOWN, KC_RGHT ), [1] = LAYOUT( @@ -31,6 +31,6 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { KC_TRNS, KC_TRNS, KC_BSLS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_F7, KC_F8, KC_TRNS, BL_TOGG, BL_STEP, BL_BRTG, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_F9, KC_F10, KC_TRNS, RGB_TOG, RGB_MOD, RGB_RMOD, RGB_VAI, RGB_VAD, RGB_HUI, RGB_HUD, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, - KC_F11, KC_F12, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS - ), + KC_F11, KC_F12, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS + ) }; diff --git a/keyboards/custommk/evo70/keymaps/via/keymap.c b/keyboards/custommk/evo70/keymaps/via/keymap.c index 34de0889ee..bff3309e63 100644 --- a/keyboards/custommk/evo70/keymaps/via/keymap.c +++ b/keyboards/custommk/evo70/keymaps/via/keymap.c @@ -23,7 +23,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_PGUP, KC_F1, KC_F2, KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, KC_PGDN, KC_F3, KC_F4, KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_UP, KC_END, - KC_F5, KC_F6, KC_LCTL, KC_LWIN, KC_LALT, KC_SPACE, KC_NO, KC_VOLD, KC_RALT, KC_RCTL, KC_VOLU, KC_LEFT, KC_DOWN, KC_RGHT + KC_F5, KC_F6, KC_LCTL, KC_LWIN, KC_LALT, KC_SPACE, KC_NO, KC_RALT, KC_RCTL, KC_LEFT, KC_DOWN, KC_RGHT ), [1] = LAYOUT( @@ -31,57 +31,13 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { KC_TRNS, KC_TRNS, KC_BSLS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_F7, KC_F8, KC_TRNS, BL_TOGG, BL_STEP, BL_BRTG, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_F9, KC_F10, KC_TRNS, RGB_TOG, RGB_MOD, RGB_RMOD, RGB_VAI, RGB_VAD, RGB_HUI, RGB_HUD, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, - KC_F11, KC_F12, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS + KC_F11, KC_F12, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS ), }; -static bool custom_encoder_mode = false; - -void set_custom_encoder_mode_user(bool custom_mode) { - custom_encoder_mode = custom_mode; -} - - -keyevent_t encoder_ccw = { - .key = (keypos_t){.row = 4, .col = 7}, - .pressed = false, - .type = KEY_EVENT -}; - -keyevent_t encoder_cw = { - .key = (keypos_t){.row = 4, .col = 10}, - .pressed = false, - .type = KEY_EVENT +#ifdef ENCODER_MAP_ENABLE +const uint16_t PROGMEM encoder_map[][NUM_ENCODERS][NUM_DIRECTIONS] = { + [0] = { ENCODER_CCW_CW(KC_VOLD, KC_VOLU) }, + [1] = { ENCODER_CCW_CW(_______, _______) }, }; - - -bool encoder_update_user(uint8_t index, bool clockwise) { - if (custom_encoder_mode) { - if (clockwise) { - encoder_cw.pressed = true; - encoder_cw.time = timer_read(); - action_exec(encoder_cw); - } - else { - encoder_ccw.pressed = true; - encoder_ccw.time = timer_read(); - action_exec(encoder_ccw); - } - return false; - } - return true; -} - -void matrix_scan_user(void) { - if (encoder_ccw.pressed) { - encoder_ccw.pressed = false; - encoder_ccw.time = timer_read(); - action_exec(encoder_ccw); - } - - if (encoder_cw.pressed) { - encoder_cw.pressed = false; - encoder_cw.time = timer_read(); - action_exec(encoder_cw); - } -} +#endif diff --git a/keyboards/custommk/evo70/keymaps/via/rules.mk b/keyboards/custommk/evo70/keymaps/via/rules.mk index 1e5b99807c..f1adcab005 100644 --- a/keyboards/custommk/evo70/keymaps/via/rules.mk +++ b/keyboards/custommk/evo70/keymaps/via/rules.mk @@ -1 +1,2 @@ VIA_ENABLE = yes +ENCODER_MAP_ENABLE = yes diff --git a/keyboards/custommk/genesis/rev1/config.h b/keyboards/custommk/genesis/rev1/config.h index d894b55edf..892ac61ad3 100644 --- a/keyboards/custommk/genesis/rev1/config.h +++ b/keyboards/custommk/genesis/rev1/config.h @@ -16,8 +16,6 @@ #pragma once -#define TAP_CODE_DELAY 10 - #define RGBLIGHT_EFFECT_BREATHING #define RGBLIGHT_EFFECT_RAINBOW_MOOD #define RGBLIGHT_EFFECT_RAINBOW_SWIRL @@ -28,9 +26,5 @@ #define RGBLIGHT_EFFECT_RGB_TEST #define RGBLIGHT_EFFECT_ALTERNATING #define RGBLIGHT_EFFECT_TWINKLE -#define RGBLED_NUM 13 -#define RGBLIGHT_HUE_STEP 8 -#define RGBLIGHT_SAT_STEP 8 -#define RGBLIGHT_VAL_STEP 8 #define RGBLIGHT_DEFAULT_MODE RGBLIGHT_MODE_RAINBOW_SWIRL + 4 diff --git a/keyboards/custommk/genesis/rev1/info.json b/keyboards/custommk/genesis/rev1/info.json index 4915497bb0..8404cdbaca 100644 --- a/keyboards/custommk/genesis/rev1/info.json +++ b/keyboards/custommk/genesis/rev1/info.json @@ -12,6 +12,9 @@ "pin": "E6" }, "rgblight": { + "saturation_steps": 8, + "brightness_steps": 8, + "led_count": 13, "max_brightness": 128 }, "matrix_pins": { @@ -25,6 +28,9 @@ {"pin_a": "D2", "pin_b": "D1", "resolution": 2} ] }, + "qmk": { + "tap_keycode_delay": 10 + }, "processor": "atmega32u4", "bootloader": "qmk-dfu", "layouts": { diff --git a/keyboards/custommk/genesis/rev2/config.h b/keyboards/custommk/genesis/rev2/config.h index 126caeab6a..6427c5de2b 100644 --- a/keyboards/custommk/genesis/rev2/config.h +++ b/keyboards/custommk/genesis/rev2/config.h @@ -16,8 +16,6 @@ #pragma once -#define TAP_CODE_DELAY 10 - #define RGBLIGHT_EFFECT_BREATHING #define RGBLIGHT_EFFECT_RAINBOW_MOOD #define RGBLIGHT_EFFECT_RAINBOW_SWIRL @@ -28,10 +26,6 @@ #define RGBLIGHT_EFFECT_RGB_TEST #define RGBLIGHT_EFFECT_ALTERNATING #define RGBLIGHT_EFFECT_TWINKLE -#define RGBLED_NUM 13 #define RGBLIGHT_LAYERS -#define RGBLIGHT_HUE_STEP 8 -#define RGBLIGHT_SAT_STEP 8 -#define RGBLIGHT_VAL_STEP 8 #define RGBLIGHT_DEFAULT_MODE RGBLIGHT_MODE_RAINBOW_SWIRL + 4 diff --git a/keyboards/custommk/genesis/rev2/info.json b/keyboards/custommk/genesis/rev2/info.json index 0ee3d9a537..6b7d1c6de3 100644 --- a/keyboards/custommk/genesis/rev2/info.json +++ b/keyboards/custommk/genesis/rev2/info.json @@ -12,6 +12,9 @@ "pin": "E6" }, "rgblight": { + "saturation_steps": 8, + "brightness_steps": 8, + "led_count": 13, "max_brightness": 128 }, "matrix_pins": { @@ -25,6 +28,9 @@ {"pin_a": "D2", "pin_b": "D1", "resolution": 2} ] }, + "qmk": { + "tap_keycode_delay": 10 + }, "processor": "atmega32u4", "bootloader": "qmk-dfu", "layouts": { @@ -80,39 +86,6 @@ {"matrix": [4, 2], "x": 0, "y": 4, "w": 2}, {"matrix": [4, 3], "x": 2, "y": 4} ] - }, - "LAYOUT_via_6x4": { - "layout": [ - {"matrix": [5, 0], "x": 0, "y": 0}, - {"matrix": [5, 1], "x": 1, "y": 0}, - {"matrix": [5, 2], "x": 3, "y": 0}, - {"matrix": [5, 3], "x": 4, "y": 0}, - - {"matrix": [0, 0], "x": 0.5, "y": 1.1}, - {"matrix": [0, 1], "x": 1.5, "y": 1.1}, - {"matrix": [0, 2], "x": 2.5, "y": 1.1}, - {"matrix": [0, 3], "x": 3.5, "y": 1.1}, - - {"matrix": [1, 0], "x": 0.5, "y": 2.1}, - {"matrix": [1, 1], "x": 1.5, "y": 2.1}, - {"matrix": [1, 2], "x": 2.5, "y": 2.1}, - {"matrix": [1, 3], "x": 3.5, "y": 2.1}, - - {"matrix": [2, 0], "x": 0.5, "y": 3.1}, - {"matrix": [2, 1], "x": 1.5, "y": 3.1}, - {"matrix": [2, 2], "x": 2.5, "y": 3.1}, - {"matrix": [2, 3], "x": 3.5, "y": 3.1}, - - {"matrix": [3, 0], "x": 0.5, "y": 4.1}, - {"matrix": [3, 1], "x": 1.5, "y": 4.1}, - {"matrix": [3, 2], "x": 2.5, "y": 4.1}, - {"matrix": [3, 3], "x": 3.5, "y": 4.1}, - - {"matrix": [4, 0], "x": 0.5, "y": 5.1}, - {"matrix": [4, 1], "x": 1.5, "y": 5.1}, - {"matrix": [4, 2], "x": 2.5, "y": 5.1}, - {"matrix": [4, 3], "x": 3.5, "y": 5.1} - ] } } } diff --git a/keyboards/custommk/genesis/rev2/keymaps/via/keymap.c b/keyboards/custommk/genesis/rev2/keymaps/via/keymap.c index 6739b8857d..e49f614cb7 100644 --- a/keyboards/custommk/genesis/rev2/keymaps/via/keymap.c +++ b/keyboards/custommk/genesis/rev2/keymaps/via/keymap.c @@ -13,7 +13,7 @@ * You should have received a copy of the GNU General Public License * along with this program. If not, see <http://www.gnu.org/licenses/>. */ - + #include QMK_KEYBOARD_H //#define GENESIS_LAYER_COLORS @@ -24,36 +24,32 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { - [0] = LAYOUT_via_6x4( - KC_VOLD, KC_VOLU, KC_VOLD, KC_VOLU, - MO(1), KC_PSLS, KC_PAST, KC_PMNS, - KC_P7, KC_P8, KC_P9, KC_PGUP, - KC_P4, KC_P5, KC_P6, KC_PPLS, - KC_P1, KC_P2, KC_P3, KC_PGDN, + [0] = LAYOUT_ortho_5x4( + MO(1), KC_PSLS, KC_PAST, KC_PMNS, + KC_P7, KC_P8, KC_P9, KC_PGUP, + KC_P4, KC_P5, KC_P6, KC_PPLS, + KC_P1, KC_P2, KC_P3, KC_PGDN, KC_P0, KC_SPC, KC_PDOT, KC_PENT), - [1] = LAYOUT_via_6x4( - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, - KC_TRNS, RGB_TOG, RGB_MOD, KC_TRNS, - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, - RGB_VAI, RGB_VAD, RGB_SPI, RGB_SPD, - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + [1] = LAYOUT_ortho_5x4( + KC_TRNS, RGB_TOG, RGB_MOD, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + RGB_VAI, RGB_VAD, RGB_SPI, RGB_SPD, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, RGB_HUI, RGB_HUD, KC_TRNS, KC_TRNS), - [2] = LAYOUT_via_6x4( - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + [2] = LAYOUT_ortho_5x4( + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS), - [3] = LAYOUT_via_6x4( - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + [3] = LAYOUT_ortho_5x4( + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS), }; @@ -92,80 +88,11 @@ void keyboard_post_init_user(void) { } #endif - -keyevent_t encoder_left_ccw = { - .key = (keypos_t){.row = 5, .col = 0}, - .pressed = false, - .type = KEY_EVENT -}; - -keyevent_t encoder_left_cw = { - .key = (keypos_t){.row = 5, .col = 1}, - .pressed = false, - .type = KEY_EVENT -}; - -keyevent_t encoder_right_ccw = { - .key = (keypos_t){.row = 5, .col = 2}, - .pressed = false, - .type = KEY_EVENT -}; - -keyevent_t encoder_right_cw = { - .key = (keypos_t){.row = 5, .col = 3}, - .pressed = false, - .type = KEY_EVENT +#ifdef ENCODER_MAP_ENABLE +const uint16_t PROGMEM encoder_map[][NUM_ENCODERS][NUM_DIRECTIONS] = { + [0] = { ENCODER_CCW_CW(KC_VOLD, KC_VOLU), ENCODER_CCW_CW(KC_VOLD, KC_VOLU) }, + [1] = { ENCODER_CCW_CW(_______, _______), ENCODER_CCW_CW(_______, _______) }, + [2] = { ENCODER_CCW_CW(_______, _______), ENCODER_CCW_CW(_______, _______) }, + [3] = { ENCODER_CCW_CW(_______, _______), ENCODER_CCW_CW(_______, _______) } }; - -void matrix_scan_user(void) { - if (encoder_left_ccw.pressed) { - encoder_left_ccw.pressed = false; - encoder_left_ccw.time = timer_read(); - action_exec(encoder_left_ccw); - } - - if (encoder_left_cw.pressed) { - encoder_left_cw.pressed = false; - encoder_left_cw.time = timer_read(); - action_exec(encoder_left_cw); - } - - if (encoder_right_ccw.pressed) { - encoder_right_ccw.pressed = false; - encoder_right_ccw.time = timer_read(); - action_exec(encoder_right_ccw); - } - - if (encoder_right_cw.pressed) { - encoder_right_cw.pressed = false; - encoder_right_cw.time = timer_read(); - action_exec(encoder_right_cw); - } - -} - - -bool encoder_update_user(uint8_t index, bool clockwise) { - if (index == 0) { - if (clockwise) { - encoder_left_cw.pressed = true; - encoder_left_cw.time = timer_read(); - action_exec(encoder_left_cw); - } else { - encoder_left_ccw.pressed = true; - encoder_left_ccw.time = timer_read(); - action_exec(encoder_left_ccw); - } - } else { - if (clockwise) { - encoder_right_cw.pressed = true; - encoder_right_cw.time = timer_read(); - action_exec(encoder_right_cw); - } else { - encoder_right_ccw.pressed = true; - encoder_right_ccw.time = timer_read(); - action_exec(encoder_right_ccw); - } - } - return false; -} +#endif diff --git a/keyboards/custommk/genesis/rev2/keymaps/via/rules.mk b/keyboards/custommk/genesis/rev2/keymaps/via/rules.mk index 43061db1dd..1189f4ad19 100644 --- a/keyboards/custommk/genesis/rev2/keymaps/via/rules.mk +++ b/keyboards/custommk/genesis/rev2/keymaps/via/rules.mk @@ -1,2 +1,3 @@ VIA_ENABLE = yes -LTO_ENABLE = yes
\ No newline at end of file +LTO_ENABLE = yes +ENCODER_MAP_ENABLE = yes diff --git a/keyboards/cutie_club/wraith/keymaps/amber/keymap.c b/keyboards/cutie_club/wraith/keymaps/amber/keymap.c index 41d5b39c40..f3ea61ba5e 100644 --- a/keyboards/cutie_club/wraith/keymaps/amber/keymap.c +++ b/keyboards/cutie_club/wraith/keymaps/amber/keymap.c @@ -40,11 +40,6 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { ) }; - -void matrix_init_user(void) { - -} - void matrix_scan_user(void) { // escape LED on layer 1 if (IS_LAYER_ON(1)) { @@ -53,7 +48,3 @@ void matrix_scan_user(void) { writePinHigh(B0); } } - -void led_set_user(uint8_t usb_led) { - -} diff --git a/keyboards/cx60/config.h b/keyboards/cx60/config.h index f14a164f57..b0b899c644 100644 --- a/keyboards/cx60/config.h +++ b/keyboards/cx60/config.h @@ -27,7 +27,3 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #define RGBLIGHT_EFFECT_RGB_TEST #define RGBLIGHT_EFFECT_ALTERNATING #define RGBLIGHT_EFFECT_TWINKLE -#define RGBLED_NUM 14 -#define RGBLIGHT_HUE_STEP 10 -#define RGBLIGHT_SAT_STEP 17 -#define RGBLIGHT_VAL_STEP 17 diff --git a/keyboards/cx60/info.json b/keyboards/cx60/info.json index 89da7fa8b3..b0323767ac 100644 --- a/keyboards/cx60/info.json +++ b/keyboards/cx60/info.json @@ -21,6 +21,10 @@ "caps_lock": "B5", "on_state": 0 }, + "rgblight": { + "hue_steps": 10, + "led_count": 14 + }, "ws2812": { "pin": "B6" }, diff --git a/keyboards/dailycraft/owl8/info.json b/keyboards/dailycraft/owl8/info.json index b1bcacb60b..194bd5bdb6 100644 --- a/keyboards/dailycraft/owl8/info.json +++ b/keyboards/dailycraft/owl8/info.json @@ -18,21 +18,16 @@ "bootloader": "atmel-dfu", "matrix_pins": { "direct": [ - ["F4", "F7", "B3", "B6", "F5", "F6", "B1", "B2", "D4", "C6", "D7", "E6", null, null, null, null] + ["F4", "F7", "B3", "B6", "F5", "F6", "B1", "B2", "D4", "C6", "D7", "E6"] ] }, "layouts": { "LAYOUT": { "layout": [ - {"x": 0, "y": 0, "matrix": [0, 12]}, - {"x": 1, "y": 0, "matrix": [0, 13]}, - {"x": 2, "y": 0, "matrix": [0, 14]}, - {"x": 3, "y": 0, "matrix": [0, 15]}, - - {"x": 0, "y": 1.25, "matrix": [0, 8]}, - {"x": 1, "y": 1.25, "matrix": [0, 9]}, - {"x": 2, "y": 1.25, "matrix": [0, 10]}, - {"x": 3, "y": 1.25, "matrix": [0, 11]}, + {"x":0, "y":1.25, "matrix": [0, 8]}, + {"x":1, "y":1.25, "matrix": [0, 9]}, + {"x":2, "y":1.25, "matrix": [0, 10]}, + {"x":3, "y":1.25, "matrix": [0, 11]}, {"x": 0, "y": 2.5, "matrix": [0, 0]}, {"x": 1, "y": 2.5, "matrix": [0, 1]}, diff --git a/keyboards/dailycraft/owl8/keymaps/default/keymap.c b/keyboards/dailycraft/owl8/keymaps/default/keymap.c index e840263639..7ff5519e5a 100644 --- a/keyboards/dailycraft/owl8/keymaps/default/keymap.c +++ b/keyboards/dailycraft/owl8/keymaps/default/keymap.c @@ -25,26 +25,22 @@ enum layer_names { const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { [_BASE] = LAYOUT( - KC_NO, KC_NO, KC_NO, KC_NO, // for encoders KC_NO, KC_NO, KC_NO, KC_NO, // for ext keys MO(1), KC_BSPC, KC_SPC, KC_ENT, KC_LEFT, KC_DOWN, KC_UP, KC_RGHT ), [_FN1] = LAYOUT( KC_NO, KC_NO, KC_NO, KC_NO, - KC_NO, KC_NO, KC_NO, KC_NO, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8 ), [_FN2] = LAYOUT( KC_NO, KC_NO, KC_NO, KC_NO, - KC_NO, KC_NO, KC_NO, KC_NO, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8 ), [_FN3] = LAYOUT( KC_NO, KC_NO, KC_NO, KC_NO, - KC_NO, KC_NO, KC_NO, KC_NO, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8 ) @@ -64,5 +60,5 @@ bool encoder_update_user(uint8_t index, bool clockwise) { tap_code(KC_UP); } } - return true; + return false; } diff --git a/keyboards/dailycraft/owl8/keymaps/via/keymap.c b/keyboards/dailycraft/owl8/keymaps/via/keymap.c index 1a3bb0f0ae..d010bbe10e 100644 --- a/keyboards/dailycraft/owl8/keymaps/via/keymap.c +++ b/keyboards/dailycraft/owl8/keymaps/via/keymap.c @@ -25,103 +25,32 @@ enum layer_names { const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { [_BASE] = LAYOUT( - KC_NO, KC_NO, KC_NO, KC_NO, // for encoders KC_NO, KC_NO, KC_NO, KC_NO, // for ext keys MO(1), KC_BSPC, KC_SPC, KC_ENT, KC_LEFT, KC_DOWN, KC_UP, KC_RGHT ), [_FN1] = LAYOUT( KC_NO, KC_NO, KC_NO, KC_NO, - KC_NO, KC_NO, KC_NO, KC_NO, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8 ), [_FN2] = LAYOUT( KC_NO, KC_NO, KC_NO, KC_NO, - KC_NO, KC_NO, KC_NO, KC_NO, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8 ), [_FN3] = LAYOUT( KC_NO, KC_NO, KC_NO, KC_NO, - KC_NO, KC_NO, KC_NO, KC_NO, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8 ) }; -keyevent_t encoder1_ccw = { - .key = (keypos_t){.row = 0, .col = 12}, - .pressed = false, - .type = KEY_EVENT -}; - -keyevent_t encoder1_cw = { - .key = (keypos_t){.row = 0, .col = 13}, - .pressed = false, - .type = KEY_EVENT -}; - -keyevent_t encoder2_ccw = { - .key = (keypos_t){.row = 0, .col = 14}, - .pressed = false, - .type = KEY_EVENT +#ifdef ENCODER_MAP_ENABLE +const uint16_t PROGMEM encoder_map[][NUM_ENCODERS][NUM_DIRECTIONS] = { + [0] = { ENCODER_CCW_CW(_______, _______), ENCODER_CCW_CW(_______, _______) }, + [1] = { ENCODER_CCW_CW(_______, _______), ENCODER_CCW_CW(_______, _______) }, + [2] = { ENCODER_CCW_CW(_______, _______), ENCODER_CCW_CW(_______, _______) }, + [3] = { ENCODER_CCW_CW(_______, _______), ENCODER_CCW_CW(_______, _______) } }; - -keyevent_t encoder2_cw = { - .key = (keypos_t){.row = 0, .col = 15}, - .pressed = false, - .type = KEY_EVENT -}; - -void matrix_scan_user(void) { - if (encoder1_ccw.pressed) { - encoder1_ccw.pressed = false; - encoder1_ccw.time = timer_read(); - action_exec(encoder1_ccw); - } - - if (encoder1_cw.pressed) { - encoder1_cw.pressed = false; - encoder1_cw.time = timer_read(); - action_exec(encoder1_cw); - } - - if (encoder2_ccw.pressed) { - encoder2_ccw.pressed = false; - encoder2_ccw.time = timer_read(); - action_exec(encoder2_ccw); - } - - if (encoder2_cw.pressed) { - encoder2_cw.pressed = false; - encoder2_cw.time = timer_read(); - action_exec(encoder2_cw); - } -} - -bool encoder_update_user(uint8_t index, bool clockwise) { - if (index == 0) { /* First encoder */ - if (clockwise) { - encoder1_cw.pressed = true; - encoder1_cw.time = timer_read(); - action_exec(encoder1_cw); - } else { - encoder1_ccw.pressed = true; - encoder1_ccw.time = timer_read(); - action_exec(encoder1_ccw); - } - } else if (index == 1) { - if (clockwise) { - encoder2_cw.pressed = true; - encoder2_cw.time = timer_read(); - action_exec(encoder2_cw); - } else { - encoder2_ccw.pressed = true; - encoder2_ccw.time = timer_read(); - action_exec(encoder2_ccw); - } - } - - return true; -} +#endif diff --git a/keyboards/dailycraft/owl8/keymaps/via/rules.mk b/keyboards/dailycraft/owl8/keymaps/via/rules.mk index 1e5b99807c..f1adcab005 100644 --- a/keyboards/dailycraft/owl8/keymaps/via/rules.mk +++ b/keyboards/dailycraft/owl8/keymaps/via/rules.mk @@ -1 +1,2 @@ VIA_ENABLE = yes +ENCODER_MAP_ENABLE = yes diff --git a/keyboards/dailycraft/stickey4/info.json b/keyboards/dailycraft/stickey4/info.json index c8d5803718..156a6d63a1 100644 --- a/keyboards/dailycraft/stickey4/info.json +++ b/keyboards/dailycraft/stickey4/info.json @@ -18,7 +18,7 @@ "bootloader": "atmel-dfu", "matrix_pins": { "direct": [ - ["D4", "C6", "D7", "E6", null, null, null, null] + ["D4", "C6", "D7", "E6"] ] }, "layouts": { @@ -27,12 +27,7 @@ {"x": 0, "y": 0, "matrix": [0, 0]}, {"x": 1, "y": 0, "matrix": [0, 1]}, {"x": 2, "y": 0, "matrix": [0, 2]}, - {"x": 3, "y": 0, "matrix": [0, 3]}, - - {"label": "Encoder 1 CCW", "x": 0, "y": 1, "matrix": [0, 4]}, - {"label": "Encoder 1 CW", "x": 1, "y": 1, "matrix": [0, 5]}, - {"label": "Encoder 2 CCW", "x": 2, "y": 1, "matrix": [0, 6]}, - {"label": "Encoder 2 CW", "x": 3, "y": 1, "matrix": [0, 7]} + {"x": 3, "y": 0, "matrix": [0, 3]} ] } } diff --git a/keyboards/dailycraft/stickey4/keymaps/default/keymap.c b/keyboards/dailycraft/stickey4/keymaps/default/keymap.c index 70de5dca44..40cfc22a0f 100644 --- a/keyboards/dailycraft/stickey4/keymaps/default/keymap.c +++ b/keyboards/dailycraft/stickey4/keymaps/default/keymap.c @@ -25,19 +25,6 @@ enum layer_names { const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { [_BASE] = LAYOUT( - KC_A, KC_B, KC_C, KC_D, - KC_NO, KC_NO, KC_NO, KC_NO // for encoders - ), - [_FN1] = LAYOUT( - KC_NO, KC_NO, KC_NO, KC_NO, - KC_NO, KC_NO, KC_NO, KC_NO - ), - [_FN2] = LAYOUT( - KC_NO, KC_NO, KC_NO, KC_NO, - KC_NO, KC_NO, KC_NO, KC_NO - ), - [_FN3] = LAYOUT( - KC_NO, KC_NO, KC_NO, KC_NO, - KC_NO, KC_NO, KC_NO, KC_NO + KC_A, KC_B, KC_C, KC_D ) }; diff --git a/keyboards/dailycraft/stickey4/keymaps/via/keymap.c b/keyboards/dailycraft/stickey4/keymaps/via/keymap.c index 30de32fa60..0e577fcf62 100644 --- a/keyboards/dailycraft/stickey4/keymaps/via/keymap.c +++ b/keyboards/dailycraft/stickey4/keymaps/via/keymap.c @@ -25,95 +25,24 @@ enum layer_names { const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { [_BASE] = LAYOUT( - KC_A, KC_B, KC_C, KC_D, - KC_NO, KC_NO, KC_NO, KC_NO // for encoders + KC_A, KC_B, KC_C, KC_D ), [_FN1] = LAYOUT( - KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO ), [_FN2] = LAYOUT( - KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO ), [_FN3] = LAYOUT( - KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO ) }; -keyevent_t encoder1_ccw = { - .key = (keypos_t){.row = 0, .col = 4}, - .pressed = false, - .type = KEY_EVENT +#ifdef ENCODER_MAP_ENABLE +const uint16_t PROGMEM encoder_map[][NUM_ENCODERS][NUM_DIRECTIONS] = { + [0] = { ENCODER_CCW_CW(_______, _______), ENCODER_CCW_CW(_______, _______) }, + [1] = { ENCODER_CCW_CW(_______, _______), ENCODER_CCW_CW(_______, _______) }, + [2] = { ENCODER_CCW_CW(_______, _______), ENCODER_CCW_CW(_______, _______) }, + [3] = { ENCODER_CCW_CW(_______, _______), ENCODER_CCW_CW(_______, _______) } }; - -keyevent_t encoder1_cw = { - .key = (keypos_t){.row = 0, .col = 5}, - .pressed = false, - .type = KEY_EVENT -}; - -keyevent_t encoder2_ccw = { - .key = (keypos_t){.row = 0, .col = 6}, - .pressed = false, - .type = KEY_EVENT -}; - -keyevent_t encoder2_cw = { - .key = (keypos_t){.row = 0, .col = 7}, - .pressed = false, - .type = KEY_EVENT -}; - -void matrix_scan_user(void) { - if (encoder1_ccw.pressed) { - encoder1_ccw.pressed = false; - encoder1_ccw.time = timer_read(); - action_exec(encoder1_ccw); - } - - if (encoder1_cw.pressed) { - encoder1_cw.pressed = false; - encoder1_cw.time = timer_read(); - action_exec(encoder1_cw); - } - - if (encoder2_ccw.pressed) { - encoder2_ccw.pressed = false; - encoder2_ccw.time = timer_read(); - action_exec(encoder2_ccw); - } - - if (encoder2_cw.pressed) { - encoder2_cw.pressed = false; - encoder2_cw.time = timer_read(); - action_exec(encoder2_cw); - } -} - -bool encoder_update_user(uint8_t index, bool clockwise) { - if (index == 0) { /* First encoder */ - if (clockwise) { - encoder1_cw.pressed = true; - encoder1_cw.time = timer_read(); - action_exec(encoder1_cw); - } else { - encoder1_ccw.pressed = true; - encoder1_ccw.time = timer_read(); - action_exec(encoder1_ccw); - } - } else if (index == 1) { - if (clockwise) { - encoder2_cw.pressed = true; - encoder2_cw.time = timer_read(); - action_exec(encoder2_cw); - } else { - encoder2_ccw.pressed = true; - encoder2_ccw.time = timer_read(); - action_exec(encoder2_ccw); - } - } - - return true; -} +#endif diff --git a/keyboards/dailycraft/stickey4/keymaps/via/rules.mk b/keyboards/dailycraft/stickey4/keymaps/via/rules.mk index 1e5b99807c..f1adcab005 100644 --- a/keyboards/dailycraft/stickey4/keymaps/via/rules.mk +++ b/keyboards/dailycraft/stickey4/keymaps/via/rules.mk @@ -1 +1,2 @@ VIA_ENABLE = yes +ENCODER_MAP_ENABLE = yes diff --git a/keyboards/dailycraft/wings42/rev2/info.json b/keyboards/dailycraft/wings42/rev2/info.json index 09cf423e93..261157627a 100644 --- a/keyboards/dailycraft/wings42/rev2/info.json +++ b/keyboards/dailycraft/wings42/rev2/info.json @@ -16,6 +16,15 @@ "split": { "soft_serial_pin": "D2" }, + "features": { + "encoder": true + }, + "encoder": { + "rotary": [ + { "pin_a": "B5", "pin_b": "B4" }, + { "pin_a": "B6", "pin_b": "B2" } + ] + }, "processor": "atmega32u4", "bootloader": "caterina", "layouts": { @@ -41,9 +50,7 @@ {"matrix": [1, 3], "x": 3, "y": 1}, {"matrix": [1, 4], "x": 4, "y": 1}, {"matrix": [1, 5], "x": 5, "y": 1.125}, - {"matrix": [3, 1], "x": 6, "y": 1.625}, - {"matrix": [8, 2], "x": 8, "y": 1.625}, {"matrix": [6, 5], "x": 9, "y": 1.125}, {"matrix": [6, 4], "x": 10, "y": 1}, {"matrix": [6, 3], "x": 11, "y": 1}, @@ -57,9 +64,7 @@ {"matrix": [2, 3], "x": 3, "y": 2}, {"matrix": [2, 4], "x": 4, "y": 2}, {"matrix": [2, 5], "x": 5, "y": 2.125}, - {"matrix": [3, 2], "x": 6, "y": 2.625}, - {"matrix": [8, 1], "x": 8, "y": 2.625}, {"matrix": [7, 5], "x": 9, "y": 2.125}, {"matrix": [7, 4], "x": 10, "y": 2}, {"matrix": [7, 3], "x": 11, "y": 2}, diff --git a/keyboards/dailycraft/wings42/rev2/keymaps/default/keymap.c b/keyboards/dailycraft/wings42/rev2/keymaps/default/keymap.c index 501b5d2e12..d809d59f4c 100644 --- a/keyboards/dailycraft/wings42/rev2/keymaps/default/keymap.c +++ b/keyboards/dailycraft/wings42/rev2/keymaps/default/keymap.c @@ -35,9 +35,9 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { //,--------+--------+--------+--------+--------+--------. ,--------+---------+--------+---------+--------+--------. KC_ESC , KC_Q , KC_W , KC_E , KC_R , KC_T , KC_Y , KC_U , KC_I , KC_O , KC_P , KC_MINS, //|--------+--------+--------+--------+--------+--------| |--------+---------+--------+---------+--------+--------| - KC_G_TAB, KC_A , KC_S , KC_D , KC_F , KC_G , KC_BSPC, KC_BSPC, KC_H , KC_J , KC_K , KC_L , KC_SCLN, KC_G_BS, + KC_G_TAB, KC_A , KC_S , KC_D , KC_F , KC_G , KC_H , KC_J , KC_K , KC_L , KC_SCLN, KC_G_BS, //|--------+--------+--------+--------+--------+--------| |--------+---------+--------+---------+--------+--------| - KC_LCTL, KC_Z , KC_X , KC_C , KC_V , KC_B , KC_DEL , KC_DEL , KC_N , KC_M , KC_COMM, KC_DOT , KC_SLSH, KC_RCTL, + KC_LCTL, KC_Z , KC_X , KC_C , KC_V , KC_B , KC_N , KC_M , KC_COMM, KC_DOT , KC_SLSH, KC_RCTL, //`--------+--------+--------+--------+--------+--------/ \--------+---------+--------+---------+--------+--------' KC_A_DEL,KC_S_EN ,KC_L_SPC, KC_R_ENT, KC_S_JA , KC_A_DEL // `+--------+--------+--------' `--------+---------+--------+' @@ -47,9 +47,9 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { //,--------+--------+--------+--------+--------+--------. ,--------+--------+--------+--------+--------+--------. _______, KC_BSLS, KC_CIRC, KC_EXLM, KC_AMPR, KC_PIPE, KC_AT , KC_EQL , KC_PLUS, KC_ASTR, KC_PERC, KC_MINS, //|--------+--------+--------+--------+--------+--------| |--------+--------+--------+--------+--------+--------| - KC_LPRN, KC_HASH, KC_DLR , KC_DQT , KC_QUOT, KC_TILD, _______, _______, KC_LEFT, KC_DOWN, KC_UP , KC_RGHT, KC_GRV , KC_RPRN, + KC_LPRN, KC_HASH, KC_DLR , KC_DQT , KC_QUOT, KC_TILD, KC_LEFT, KC_DOWN, KC_UP , KC_RGHT, KC_GRV , KC_RPRN, //|--------+--------+--------+--------+--------+--------| |--------+--------+--------+--------+--------+--------| - _______, _______, _______, _______, KC_LCBR, KC_LBRC, _______, _______, KC_RBRC, KC_RCBR, _______, _______, _______, _______, + _______, _______, _______, _______, KC_LCBR, KC_LBRC, KC_RBRC, KC_RCBR, _______, _______, _______, _______, //`--------+--------+--------+--------+--------+--------/ \--------+--------+--------+--------+--------+--------' _______, _______, _______, _______, _______, QK_BOOT // `+--------+--------+--------' `--------+-------+--------+' @@ -59,9 +59,9 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { //,--------+--------+--------+--------+--------+--------. ,--------+--------+--------+--------+--------+--------. KC_F1 , KC_F2 , KC_F3 , KC_F4 , KC_F5 , KC_F6 , _______, KC_EQL , KC_PLUS, KC_ASTR, KC_PERC, KC_MINS, //|--------+--------+--------+--------+--------+--------| |--------+--------+--------+--------+--------+--------| - _______, KC_1 , KC_2 , KC_3 , KC_4 , KC_5 , _______, _______, KC_6 , KC_7 , KC_8 , KC_9 , KC_0 , _______, + _______, KC_1 , KC_2 , KC_3 , KC_4 , KC_5 , KC_6 , KC_7 , KC_8 , KC_9 , KC_0 , _______, //|--------+--------+--------+--------+--------+--------| |--------+--------+--------+--------+--------+--------| - KC_F7 , KC_F8 , KC_F9 , KC_F10 , KC_F11 , KC_F12 , _______, _______, _______, _______, KC_COMM, KC_DOT , KC_SLSH, _______, + KC_F7 , KC_F8 , KC_F9 , KC_F10 , KC_F11 , KC_F12 , _______, _______, KC_COMM, KC_DOT , KC_SLSH, _______, //`--------+--------+--------+--------+--------+--------/ \--------+--------+--------+--------+--------+--------' QK_BOOT , _______, _______, _______, _______, _______ // `+--------+--------+--------' `--------+--------+--------+' @@ -71,9 +71,9 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { //,--------+--------+--------+--------+--------+--------. ,--------+--------+--------+--------+--------+--------. _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, //|--------+--------+--------+--------+--------+--------| |--------+--------+--------+--------+--------+--------| - _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, //|--------+--------+--------+--------+--------+--------| |--------+--------+--------+--------+--------+--------| - _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, //`--------+--------+--------+--------+--------+--------/ \--------+--------+--------+--------+--------+--------' _______, _______, _______, _______, _______, _______ // `+--------+--------+--------' `--------+--------+--------+' diff --git a/keyboards/dailycraft/wings42/rev2/keymaps/via/keymap.c b/keyboards/dailycraft/wings42/rev2/keymaps/via/keymap.c index 7349bf2411..362164c5ec 100644 --- a/keyboards/dailycraft/wings42/rev2/keymaps/via/keymap.c +++ b/keyboards/dailycraft/wings42/rev2/keymaps/via/keymap.c @@ -35,9 +35,9 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { //,--------+--------+--------+--------+--------+--------. ,--------+---------+--------+---------+--------+--------. KC_ESC , KC_Q , KC_W , KC_E , KC_R , KC_T , KC_Y , KC_U , KC_I , KC_O , KC_P , KC_MINS, //|--------+--------+--------+--------+--------+--------| |--------+---------+--------+---------+--------+--------| - KC_G_TAB, KC_A , KC_S , KC_D , KC_F , KC_G , KC_BSPC, KC_BSPC, KC_H , KC_J , KC_K , KC_L , KC_SCLN, KC_G_BS, + KC_G_TAB, KC_A , KC_S , KC_D , KC_F , KC_G , KC_H , KC_J , KC_K , KC_L , KC_SCLN, KC_G_BS, //|--------+--------+--------+--------+--------+--------| |--------+---------+--------+---------+--------+--------| - KC_LCTL, KC_Z , KC_X , KC_C , KC_V , KC_B , KC_DEL , KC_DEL , KC_N , KC_M , KC_COMM, KC_DOT , KC_SLSH, KC_RCTL, + KC_LCTL, KC_Z , KC_X , KC_C , KC_V , KC_B , KC_N , KC_M , KC_COMM, KC_DOT , KC_SLSH, KC_RCTL, //`--------+--------+--------+--------+--------+--------/ \--------+---------+--------+---------+--------+--------' KC_A_DEL,KC_S_EN ,KC_L_SPC, KC_R_ENT, KC_S_JA , KC_A_DEL // `+--------+--------+--------' `--------+---------+--------+' @@ -47,9 +47,9 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { //,--------+--------+--------+--------+--------+--------. ,--------+--------+--------+--------+--------+--------. _______, KC_BSLS, KC_CIRC, KC_EXLM, KC_AMPR, KC_PIPE, KC_AT , KC_EQL , KC_PLUS, KC_ASTR, KC_PERC, KC_MINS, //|--------+--------+--------+--------+--------+--------| |--------+--------+--------+--------+--------+--------| - KC_LPRN, KC_HASH, KC_DLR , KC_DQT , KC_QUOT, KC_TILD, _______, _______, KC_LEFT, KC_DOWN, KC_UP , KC_RGHT, KC_GRV , KC_RPRN, + KC_LPRN, KC_HASH, KC_DLR , KC_DQT , KC_QUOT, KC_TILD, KC_LEFT, KC_DOWN, KC_UP , KC_RGHT, KC_GRV , KC_RPRN, //|--------+--------+--------+--------+--------+--------| |--------+--------+--------+--------+--------+--------| - _______, _______, _______, _______, KC_LCBR, KC_LBRC, _______, _______, KC_RBRC, KC_RCBR, _______, _______, _______, _______, + _______, _______, _______, _______, KC_LCBR, KC_LBRC, KC_RBRC, KC_RCBR, _______, _______, _______, _______, //`--------+--------+--------+--------+--------+--------/ \--------+--------+--------+--------+--------+--------' _______, _______, _______, _______, _______, QK_BOOT // `+--------+--------+--------' `--------+-------+--------+' @@ -59,9 +59,9 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { //,--------+--------+--------+--------+--------+--------. ,--------+--------+--------+--------+--------+--------. KC_F1 , KC_F2 , KC_F3 , KC_F4 , KC_F5 , KC_F6 , _______, KC_EQL , KC_PLUS, KC_ASTR, KC_PERC, KC_MINS, //|--------+--------+--------+--------+--------+--------| |--------+--------+--------+--------+--------+--------| - _______, KC_1 , KC_2 , KC_3 , KC_4 , KC_5 , _______, _______, KC_6 , KC_7 , KC_8 , KC_9 , KC_0 , _______, + _______, KC_1 , KC_2 , KC_3 , KC_4 , KC_5 , KC_6 , KC_7 , KC_8 , KC_9 , KC_0 , _______, //|--------+--------+--------+--------+--------+--------| |--------+--------+--------+--------+--------+--------| - KC_F7 , KC_F8 , KC_F9 , KC_F10 , KC_F11 , KC_F12 , _______, _______, _______, _______, KC_COMM, KC_DOT , KC_SLSH, _______, + KC_F7 , KC_F8 , KC_F9 , KC_F10 , KC_F11 , KC_F12 , _______, _______, KC_COMM, KC_DOT , KC_SLSH, _______, //`--------+--------+--------+--------+--------+--------/ \--------+--------+--------+--------+--------+--------' QK_BOOT , _______, _______, _______, _______, _______ // `+--------+--------+--------' `--------+--------+--------+' @@ -71,156 +71,20 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { //,--------+--------+--------+--------+--------+--------. ,--------+--------+--------+--------+--------+--------. _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, //|--------+--------+--------+--------+--------+--------| |--------+--------+--------+--------+--------+--------| - _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, //|--------+--------+--------+--------+--------+--------| |--------+--------+--------+--------+--------+--------| - _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, //`--------+--------+--------+--------+--------+--------/ \--------+--------+--------+--------+--------+--------' _______, _______, _______, _______, _______, _______ // `+--------+--------+--------' `--------+--------+--------+' ), }; -keyevent_t encoder1_ccw = { - .key = (keypos_t){.row = 4, .col = 0}, - .pressed = false, - .type = KEY_EVENT -}; - -keyevent_t encoder1_cw = { - .key = (keypos_t){.row = 4, .col = 1}, - .pressed = false, - .type = KEY_EVENT -}; - -keyevent_t encoder2_ccw = { - .key = (keypos_t){.row = 4, .col = 2}, - .pressed = false, - .type = KEY_EVENT -}; - -keyevent_t encoder2_cw = { - .key = (keypos_t){.row = 4, .col = 3}, - .pressed = false, - .type = KEY_EVENT -}; - -keyevent_t encoder3_ccw = { - .key = (keypos_t){.row = 9, .col = 1}, - .pressed = false, - .type = KEY_EVENT -}; - -keyevent_t encoder3_cw = { - .key = (keypos_t){.row = 9, .col = 0}, - .pressed = false, - .type = KEY_EVENT -}; - -keyevent_t encoder4_ccw = { - .key = (keypos_t){.row = 9, .col = 3}, - .pressed = false, - .type = KEY_EVENT +#ifdef ENCODER_MAP_ENABLE +const uint16_t PROGMEM encoder_map[][NUM_ENCODERS][NUM_DIRECTIONS] = { + [0] = { ENCODER_CCW_CW(KC_BSPC, KC_DEL), ENCODER_CCW_CW(KC_BSPC, KC_DEL) }, + [1] = { ENCODER_CCW_CW(_______, _______), ENCODER_CCW_CW(_______, _______) }, + [2] = { ENCODER_CCW_CW(_______, _______), ENCODER_CCW_CW(_______, _______) }, + [3] = { ENCODER_CCW_CW(_______, _______), ENCODER_CCW_CW(_______, _______) } }; - -keyevent_t encoder4_cw = { - .key = (keypos_t){.row = 9, .col = 2}, - .pressed = false, - .type = KEY_EVENT -}; - - -void matrix_scan_user(void) { - if (encoder1_ccw.pressed) { - encoder1_ccw.pressed = false; - encoder1_ccw.time = timer_read(); - action_exec(encoder1_ccw); - } - - if (encoder1_cw.pressed) { - encoder1_cw.pressed = false; - encoder1_cw.time = timer_read(); - action_exec(encoder1_cw); - } - - if (encoder2_ccw.pressed) { - encoder2_ccw.pressed = false; - encoder2_ccw.time = timer_read(); - action_exec(encoder2_ccw); - } - - if (encoder2_cw.pressed) { - encoder2_cw.pressed = false; - encoder2_cw.time = timer_read(); - action_exec(encoder2_cw); - } - - if (encoder3_ccw.pressed) { - encoder3_ccw.pressed = false; - encoder3_ccw.time = timer_read(); - action_exec(encoder3_ccw); - } - - if (encoder3_cw.pressed) { - encoder3_cw.pressed = false; - encoder3_cw.time = timer_read(); - action_exec(encoder3_cw); - } - - if (encoder4_ccw.pressed) { - encoder4_ccw.pressed = false; - encoder4_ccw.time = timer_read(); - action_exec(encoder4_ccw); - } - - if (encoder4_cw.pressed) { - encoder4_cw.pressed = false; - encoder4_cw.time = timer_read(); - action_exec(encoder4_cw); - } -} - -bool encoder_update_user(uint8_t index, bool clockwise) { - if (index == 0) { - if (clockwise) { - encoder1_cw.pressed = true; - encoder1_cw.time = timer_read(); - action_exec(encoder1_cw); - } else { - encoder1_ccw.pressed = true; - encoder1_ccw.time = timer_read(); - action_exec(encoder1_ccw); - } - } else if (index == 1) { - if (clockwise) { - encoder2_cw.pressed = true; - encoder2_cw.time = timer_read(); - action_exec(encoder2_cw); - } else { - encoder2_ccw.pressed = true; - encoder2_ccw.time = timer_read(); - action_exec(encoder2_ccw); - } - } else if (index == 2) { - if (clockwise) { - encoder3_cw.pressed = true; - encoder3_cw.time = timer_read(); - action_exec(encoder3_cw); - } else { - encoder3_ccw.pressed = true; - encoder3_ccw.time = timer_read(); - action_exec(encoder3_ccw); - } - } else if (index == 3) { - if (clockwise) { - encoder4_cw.pressed = true; - encoder4_cw.time = timer_read(); - action_exec(encoder4_cw); - } else { - encoder4_ccw.pressed = true; - encoder4_ccw.time = timer_read(); - action_exec(encoder4_ccw); - } - } - - return true; -} +#endif diff --git a/keyboards/dailycraft/wings42/rev2/keymaps/via/rules.mk b/keyboards/dailycraft/wings42/rev2/keymaps/via/rules.mk index eea5e1e2a2..f1adcab005 100644 --- a/keyboards/dailycraft/wings42/rev2/keymaps/via/rules.mk +++ b/keyboards/dailycraft/wings42/rev2/keymaps/via/rules.mk @@ -1,2 +1,2 @@ -ENCODER_ENABLE = yes VIA_ENABLE = yes +ENCODER_MAP_ENABLE = yes diff --git a/keyboards/daji/seis_cinco/rules.mk b/keyboards/daji/seis_cinco/rules.mk index 9e42693cb6..c3b8e77d77 100644 --- a/keyboards/daji/seis_cinco/rules.mk +++ b/keyboards/daji/seis_cinco/rules.mk @@ -11,5 +11,3 @@ BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow AUDIO_ENABLE = no # Audio output -# Enter lower-power sleep mode when on the ChibiOS idle thread -OPT_DEFS += -DCORTEX_ENABLE_WFI_IDLE=TRUE diff --git a/keyboards/db/db63/config.h b/keyboards/db/db63/config.h index 7a7d3584de..c82ef78de8 100644 --- a/keyboards/db/db63/config.h +++ b/keyboards/db/db63/config.h @@ -17,7 +17,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #pragma once -#define RGBLED_NUM 18 #define RGBLIGHT_EFFECT_BREATHING #define RGBLIGHT_EFFECT_RAINBOW_MOOD #define RGBLIGHT_EFFECT_RAINBOW_SWIRL diff --git a/keyboards/db/db63/info.json b/keyboards/db/db63/info.json index c8004a2bae..1faaf2becf 100644 --- a/keyboards/db/db63/info.json +++ b/keyboards/db/db63/info.json @@ -16,6 +16,9 @@ "backlight": { "pin": "D4" }, + "rgblight": { + "led_count": 18 + }, "ws2812": { "driver": "i2c" }, diff --git a/keyboards/dekunukem/duckypad/config.h b/keyboards/dekunukem/duckypad/config.h index 692f679d24..cc4c962462 100644 --- a/keyboards/dekunukem/duckypad/config.h +++ b/keyboards/dekunukem/duckypad/config.h @@ -20,63 +20,11 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #pragma once -#define RGBLED_NUM 15 -#define RGB_MATRIX_LED_COUNT 15 - #ifdef RGB_MATRIX_ENABLE - +#define RGB_MATRIX_LED_COUNT 15 #define RGB_MATRIX_KEYPRESSES #define RGB_MATRIX_DEFAULT_MODE RGB_MATRIX_SOLID_REACTIVE_SIMPLE #define RGB_MATRIX_DEFAULT_HUE 221 -// RGB Matrix Animation modes. Explicitly enabled -// For full list of effects, see: -// https://docs.qmk.fm/#/feature_rgb_matrix?id=rgb-matrix-effects -# define ENABLE_RGB_MATRIX_ALPHAS_MODS -# define ENABLE_RGB_MATRIX_GRADIENT_UP_DOWN -# define ENABLE_RGB_MATRIX_GRADIENT_LEFT_RIGHT -# define ENABLE_RGB_MATRIX_BREATHING -# define ENABLE_RGB_MATRIX_BAND_SAT -# define ENABLE_RGB_MATRIX_BAND_VAL -# define ENABLE_RGB_MATRIX_BAND_PINWHEEL_SAT -# define ENABLE_RGB_MATRIX_BAND_PINWHEEL_VAL -# define ENABLE_RGB_MATRIX_BAND_SPIRAL_SAT -# define ENABLE_RGB_MATRIX_BAND_SPIRAL_VAL -# define ENABLE_RGB_MATRIX_CYCLE_ALL -# define ENABLE_RGB_MATRIX_CYCLE_LEFT_RIGHT -# define ENABLE_RGB_MATRIX_CYCLE_UP_DOWN -# define ENABLE_RGB_MATRIX_RAINBOW_MOVING_CHEVRON -# define ENABLE_RGB_MATRIX_CYCLE_OUT_IN -# define ENABLE_RGB_MATRIX_CYCLE_OUT_IN_DUAL -# define ENABLE_RGB_MATRIX_CYCLE_PINWHEEL -# define ENABLE_RGB_MATRIX_CYCLE_SPIRAL -# define ENABLE_RGB_MATRIX_DUAL_BEACON -# define ENABLE_RGB_MATRIX_RAINBOW_BEACON -# define ENABLE_RGB_MATRIX_RAINBOW_PINWHEELS -# define ENABLE_RGB_MATRIX_RAINDROPS -# define ENABLE_RGB_MATRIX_JELLYBEAN_RAINDROPS -# define ENABLE_RGB_MATRIX_HUE_BREATHING -# define ENABLE_RGB_MATRIX_HUE_PENDULUM -# define ENABLE_RGB_MATRIX_HUE_WAVE -# define ENABLE_RGB_MATRIX_PIXEL_RAIN -# define ENABLE_RGB_MATRIX_PIXEL_FLOW -# define ENABLE_RGB_MATRIX_PIXEL_FRACTAL -// enabled only if RGB_MATRIX_FRAMEBUFFER_EFFECTS is defined -# define ENABLE_RGB_MATRIX_TYPING_HEATMAP -# define ENABLE_RGB_MATRIX_DIGITAL_RAIN -// enabled only of RGB_MATRIX_KEYPRESSES or RGB_MATRIX_KEYRELEASES is defined -# define ENABLE_RGB_MATRIX_SOLID_REACTIVE_SIMPLE -# define ENABLE_RGB_MATRIX_SOLID_REACTIVE -# define ENABLE_RGB_MATRIX_SOLID_REACTIVE_WIDE -# define ENABLE_RGB_MATRIX_SOLID_REACTIVE_MULTIWIDE -# define ENABLE_RGB_MATRIX_SOLID_REACTIVE_CROSS -# define ENABLE_RGB_MATRIX_SOLID_REACTIVE_MULTICROSS -# define ENABLE_RGB_MATRIX_SOLID_REACTIVE_NEXUS -# define ENABLE_RGB_MATRIX_SOLID_REACTIVE_MULTINEXUS -# define ENABLE_RGB_MATRIX_SPLASH -# define ENABLE_RGB_MATRIX_MULTISPLASH -# define ENABLE_RGB_MATRIX_SOLID_SPLASH -# define ENABLE_RGB_MATRIX_SOLID_MULTISPLASH - #endif #define I2C1_SCL_PIN B8 diff --git a/keyboards/dekunukem/duckypad/duckypad.c b/keyboards/dekunukem/duckypad/duckypad.c index d03d284b95..7e486c4550 100644 --- a/keyboards/dekunukem/duckypad/duckypad.c +++ b/keyboards/dekunukem/duckypad/duckypad.c @@ -20,32 +20,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #include "quantum.h" -#ifdef RGB_MATRIX_ENABLE - -led_config_t g_led_config = { { - { 2, 1, 0, 3, 4, 5, 8, 7, 6, 9, 10, 11, 14, 13, 12, NO_LED, NO_LED } -}, { - {224, 0}, - {112, 0}, - {0, 0}, - {0, 16}, - {112, 16}, - {224, 16}, - {224, 32}, - {112, 32}, - {0, 32}, - {0, 48}, - {112, 48}, - {224, 48}, - {224, 64}, - {112, 64}, - {0, 64}, -}, { - 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, -} }; - -#endif - void keyboard_pre_init_kb(void) { setPinOutput(A0); writePinHigh(A0); @@ -55,3 +29,21 @@ void keyboard_pre_init_kb(void) { keyboard_pre_init_user(); } + +#ifdef OLED_ENABLE +# define LOGO_SIZE 384 +bool oled_task_kb(void) { + if (!oled_task_user()) { + return false; + } + static const char PROGMEM ducky_logo[LOGO_SIZE] = { + // clang-format off + 0, 0, 0, 0,128,128,128,128,128, 0, 0,252,252,252, 0, 0, 0,128,128,128, 0, 0, 0, 0, 0,128,128,128, 0, 0, 0, 0, 0,128,128,128,128,128, 0, 0, 0, 0, 0,252,252,252, 0, 0, 0, 0, 0,128,128,128,128,128,128, 0, 0, 0, 0, 0, 0,128,128,128,128, 0,248,248,248, 56, 56, 56, 56, 56, 56,120,240,224,192, 0, 0,128,128,128,128,128,128, 0, 0, 0, 0, 0, 0, 0, 0,128,128,128,128,128, 0, 0,252,252,252, 0, 0, 0, 0, 0,232, 24, 24,232, 0, 24, 48, 48, 24, 0,232, 24, 24,232, 0, 0, + 0,248,254,255,143, 7, 3, 3, 3, 7,142,255,255,255, 0, 0, 0,255,255,255, 0, 0, 0, 0, 0,255,255,255, 0,248,254,255,143, 7, 3, 3, 3, 3,143, 7, 2, 0, 0,255,255,255,240,120,252,254,231,131, 1, 0, 1, 7, 63,254,240,192, 0,224,252,127, 31, 3, 0, 0,255,255,255,112,112,112,112,112,112, 56, 63, 31, 15,193,231,243,115, 51, 51, 51, 55,255,255,252, 0, 0,248,254,255,143, 7, 3, 3, 3, 7,142,255,255,255, 0, 0, 0, 0, 0, 21,127,127,252,252,252,253,253,252,252,252,255,255,255, 0, 0, + 0, 0, 3, 7, 15, 15, 14, 14, 14, 7, 3, 15, 15, 15, 0, 0, 0, 3, 7, 15, 15, 14, 14, 6, 3, 15, 15, 15, 0, 0, 3, 7, 7, 15, 14, 14, 14, 14, 7, 7, 2, 0, 0, 15, 15, 15, 0, 0, 0, 1, 3, 15, 15, 12,136,224,224,224,247,127,127, 31, 3, 0, 0, 0, 0, 0, 15, 15, 15, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 3, 7, 15, 14, 14, 14, 6, 3, 15, 15, 15, 0, 0, 0, 3, 7, 15, 15, 14, 14, 14, 7, 3, 15, 15, 15, 0, 0, 0, 0, 0, 0, 0, 0, 0, 8, 7, 11, 3, 11, 7, 11, 7, 7, 31, 0, 0 + //clang-format on + }; + oled_write_raw_P(ducky_logo, LOGO_SIZE); + return false; +} +#endif diff --git a/keyboards/dekunukem/duckypad/info.json b/keyboards/dekunukem/duckypad/info.json index e5859b718a..1c702e1b1b 100644 --- a/keyboards/dekunukem/duckypad/info.json +++ b/keyboards/dekunukem/duckypad/info.json @@ -8,11 +8,79 @@ "pid": "0x4450", "device_version": "0.0.1" }, + "features": { + "extrakey": true, + "rgb_matrix": true, + "oled": true + }, "ws2812": { "pin": "A10" }, "rgb_matrix": { - "driver": "WS2812" + "driver": "WS2812", + "layout": [ + {"matrix": [0, 2], "x": 224, "y": 0, "flags": 4}, + {"matrix": [0, 1], "x": 112, "y": 0, "flags": 4}, + {"matrix": [0, 0], "x": 0, "y": 0, "flags": 4}, + {"matrix": [0, 3], "x": 0, "y": 16, "flags": 4}, + {"matrix": [0, 4], "x": 112, "y": 16, "flags": 4}, + {"matrix": [0, 5], "x": 224, "y": 16, "flags": 4}, + {"matrix": [0, 8], "x": 224, "y": 32, "flags": 4}, + {"matrix": [0, 7], "x": 112, "y": 32, "flags": 4}, + {"matrix": [0, 6], "x": 0, "y": 32, "flags": 4}, + {"matrix": [0, 9], "x": 0, "y": 48, "flags": 4}, + {"matrix": [0, 10], "x": 112, "y": 48, "flags": 4}, + {"matrix": [0, 11], "x": 224, "y": 48, "flags": 4}, + {"matrix": [0, 14], "x": 224, "y": 64, "flags": 4}, + {"matrix": [0, 13], "x": 112, "y": 64, "flags": 4}, + {"matrix": [0, 12], "x": 0, "y": 64, "flags": 4} + ], + "animations": { + "alphas_mods": true, + "band_pinwheel_sat": true, + "band_pinwheel_val": true, + "band_sat": true, + "band_spiral_sat": true, + "band_spiral_val": true, + "band_val": true, + "breathing": true, + "cycle_all": true, + "cycle_left_right": true, + "cycle_out_in": true, + "cycle_out_in_dual": true, + "cycle_pinwheel": true, + "cycle_spiral": true, + "cycle_up_down": true, + "digital_rain": true, + "dual_beacon": true, + "gradient_left_right": true, + "gradient_up_down": true, + "hue_breathing": true, + "hue_pendulum": true, + "hue_wave": true, + "jellybean_raindrops": true, + "multisplash": true, + "pixel_flow": true, + "pixel_fractal": true, + "pixel_rain": true, + "rainbow_beacon": true, + "rainbow_moving_chevron": true, + "rainbow_pinwheels": true, + "raindrops": true, + "solid_color": true, + "solid_multisplash": true, + "solid_reactive": true, + "solid_reactive_cross": true, + "solid_reactive_multicross": true, + "solid_reactive_multinexus": true, + "solid_reactive_multiwide": true, + "solid_reactive_nexus": true, + "solid_reactive_simple": true, + "solid_reactive_wide": true, + "solid_splash": true, + "splash": true, + "typing_heatmap": true + } }, "processor": "STM32F072", "bootloader": "stm32-dfu", diff --git a/keyboards/dekunukem/duckypad/keymaps/default/keymap.c b/keyboards/dekunukem/duckypad/keymaps/default/keymap.c index 3b74640fe6..482f816fb3 100644 --- a/keyboards/dekunukem/duckypad/keymaps/default/keymap.c +++ b/keyboards/dekunukem/duckypad/keymaps/default/keymap.c @@ -40,9 +40,10 @@ enum my_keycodes { Z12, Z13, Z14 }; -#define _DEFAULT 0 -#define _RGB 1 - +enum layers { + _DEFAULT, + _RGB +}; const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { /* diff --git a/keyboards/dekunukem/duckypad/keymaps/via/keymap.c b/keyboards/dekunukem/duckypad/keymaps/via/keymap.c index 01baaeb593..c3bb88353f 100644 --- a/keyboards/dekunukem/duckypad/keymaps/via/keymap.c +++ b/keyboards/dekunukem/duckypad/keymaps/via/keymap.c @@ -20,9 +20,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #include QMK_KEYBOARD_H -#define LOGO_SIZE 384 - - const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { LAYOUT( KC_KP_1, KC_KP_2, KC_KP_3, @@ -31,43 +28,5 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { KC_TRNS, KC_KP_0, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS - ), - LAYOUT( - KC_TRNS, KC_TRNS, KC_TRNS, - KC_TRNS, KC_TRNS, KC_TRNS, - KC_TRNS, KC_TRNS, KC_TRNS, - KC_TRNS, KC_TRNS, KC_TRNS, - KC_TRNS, KC_TRNS, KC_TRNS, - KC_TRNS, KC_TRNS - ), - LAYOUT( - KC_TRNS, KC_TRNS, KC_TRNS, - KC_TRNS, KC_TRNS, KC_TRNS, - KC_TRNS, KC_TRNS, KC_TRNS, - KC_TRNS, KC_TRNS, KC_TRNS, - KC_TRNS, KC_TRNS, KC_TRNS, - KC_TRNS, KC_TRNS - ), - LAYOUT( - KC_TRNS, KC_TRNS, KC_TRNS, - KC_TRNS, KC_TRNS, KC_TRNS, - KC_TRNS, KC_TRNS, KC_TRNS, - KC_TRNS, KC_TRNS, KC_TRNS, - KC_TRNS, KC_TRNS, KC_TRNS, - KC_TRNS, KC_TRNS - ), + ) }; - -static void render_logo(void) { - static const char PROGMEM ducky_logo[LOGO_SIZE] = { - 0, 0, 0, 0,128,128,128,128,128, 0, 0,252,252,252, 0, 0, 0,128,128,128, 0, 0, 0, 0, 0,128,128,128, 0, 0, 0, 0, 0,128,128,128,128,128, 0, 0, 0, 0, 0,252,252,252, 0, 0, 0, 0, 0,128,128,128,128,128,128, 0, 0, 0, 0, 0, 0,128,128,128,128, 0,248,248,248, 56, 56, 56, 56, 56, 56,120,240,224,192, 0, 0,128,128,128,128,128,128, 0, 0, 0, 0, 0, 0, 0, 0,128,128,128,128,128, 0, 0,252,252,252, 0, 0, 0, 0, 0,232, 24, 24,232, 0, 24, 48, 48, 24, 0,232, 24, 24,232, 0, 0, - 0,248,254,255,143, 7, 3, 3, 3, 7,142,255,255,255, 0, 0, 0,255,255,255, 0, 0, 0, 0, 0,255,255,255, 0,248,254,255,143, 7, 3, 3, 3, 3,143, 7, 2, 0, 0,255,255,255,240,120,252,254,231,131, 1, 0, 1, 7, 63,254,240,192, 0,224,252,127, 31, 3, 0, 0,255,255,255,112,112,112,112,112,112, 56, 63, 31, 15,193,231,243,115, 51, 51, 51, 55,255,255,252, 0, 0,248,254,255,143, 7, 3, 3, 3, 7,142,255,255,255, 0, 0, 0, 0, 0, 21,127,127,252,252,252,253,253,252,252,252,255,255,255, 0, 0, - 0, 0, 3, 7, 15, 15, 14, 14, 14, 7, 3, 15, 15, 15, 0, 0, 0, 3, 7, 15, 15, 14, 14, 6, 3, 15, 15, 15, 0, 0, 3, 7, 7, 15, 14, 14, 14, 14, 7, 7, 2, 0, 0, 15, 15, 15, 0, 0, 0, 1, 3, 15, 15, 12,136,224,224,224,247,127,127, 31, 3, 0, 0, 0, 0, 0, 15, 15, 15, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 3, 7, 15, 14, 14, 14, 6, 3, 15, 15, 15, 0, 0, 0, 3, 7, 15, 15, 14, 14, 14, 7, 3, 15, 15, 15, 0, 0, 0, 0, 0, 0, 0, 0, 0, 8, 7, 11, 3, 11, 7, 11, 7, 7, 31, 0, 0 - }; - oled_write_raw_P(ducky_logo, LOGO_SIZE); -} - -bool oled_task_user(void) { - render_logo(); - return false; -} diff --git a/keyboards/dekunukem/duckypad/keymaps/via/rules.mk b/keyboards/dekunukem/duckypad/keymaps/via/rules.mk index 5085d50a04..1e5b99807c 100644 --- a/keyboards/dekunukem/duckypad/keymaps/via/rules.mk +++ b/keyboards/dekunukem/duckypad/keymaps/via/rules.mk @@ -1,3 +1 @@ VIA_ENABLE = yes -RGBLIGHT_ENABLE = yes # Enable keyboard RGB underglow -RGB_MATRIX_ENABLE = no diff --git a/keyboards/dekunukem/duckypad/rules.mk b/keyboards/dekunukem/duckypad/rules.mk index d9bd708a95..6e7633bfe0 100644 --- a/keyboards/dekunukem/duckypad/rules.mk +++ b/keyboards/dekunukem/duckypad/rules.mk @@ -1,17 +1 @@ -# Build Options -# change yes to no to disable -# -BOOTMAGIC_ENABLE = no # Enable Bootmagic Lite -MOUSEKEY_ENABLE = no # Mouse keys -EXTRAKEY_ENABLE = yes # Audio control and System control -CONSOLE_ENABLE = no # Console for debug -COMMAND_ENABLE = no # Commands for debug and configuration -NKRO_ENABLE = no # Enable N-Key Rollover -BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality -RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow -AUDIO_ENABLE = no # Audio output - -RGB_MATRIX_ENABLE = yes - -OLED_ENABLE = yes -OLED_DRIVER = SSD1306 +# This file intentionally left blank diff --git a/keyboards/delikeeb/flatbread60/config.h b/keyboards/delikeeb/flatbread60/config.h index 545ce1fadb..ce8ba5fef4 100644 --- a/keyboards/delikeeb/flatbread60/config.h +++ b/keyboards/delikeeb/flatbread60/config.h @@ -17,12 +17,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #pragma once - #define RGBLED_NUM 19 - #define RGBLIGHT_HUE_STEP 8 - #define RGBLIGHT_SAT_STEP 8 - #define RGBLIGHT_VAL_STEP 8 - #define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */ - #define RGBLIGHT_EFFECT_BREATHING #define RGBLIGHT_EFFECT_RAINBOW_MOOD #define RGBLIGHT_EFFECT_RAINBOW_SWIRL diff --git a/keyboards/delikeeb/flatbread60/info.json b/keyboards/delikeeb/flatbread60/info.json index e43a3458ea..aea248d248 100644 --- a/keyboards/delikeeb/flatbread60/info.json +++ b/keyboards/delikeeb/flatbread60/info.json @@ -8,6 +8,12 @@ "pid": "0x0000", "device_version": "0.0.1" }, + "rgblight": { + "saturation_steps": 8, + "brightness_steps": 8, + "led_count": 19, + "sleep": true + }, "ws2812": { "pin": "F7" }, diff --git a/keyboards/delikeeb/vaguettelite/config.h b/keyboards/delikeeb/vaguettelite/config.h index b2c1315f3a..e063678b4f 100644 --- a/keyboards/delikeeb/vaguettelite/config.h +++ b/keyboards/delikeeb/vaguettelite/config.h @@ -17,11 +17,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #pragma once -# define RGBLED_NUM 9 -# define RGBLIGHT_HUE_STEP 8 -# define RGBLIGHT_SAT_STEP 8 -# define RGBLIGHT_VAL_STEP 8 -# define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */ // # define RGBLIGHT_EFFECT_BREATHING # define RGBLIGHT_EFFECT_RAINBOW_MOOD # define RGBLIGHT_EFFECT_RAINBOW_SWIRL diff --git a/keyboards/delikeeb/vaguettelite/info.json b/keyboards/delikeeb/vaguettelite/info.json index b6ddb96725..c1c065bb07 100644 --- a/keyboards/delikeeb/vaguettelite/info.json +++ b/keyboards/delikeeb/vaguettelite/info.json @@ -19,6 +19,12 @@ {"pin_a": "F1", "pin_b": "F0"} ] }, + "rgblight": { + "saturation_steps": 8, + "brightness_steps": 8, + "led_count": 9, + "sleep": true + }, "ws2812": { "pin": "C7" }, diff --git a/keyboards/delikeeb/vanana/rev1/config.h b/keyboards/delikeeb/vanana/rev1/config.h index 984a14d94f..eee7ef04b4 100644 --- a/keyboards/delikeeb/vanana/rev1/config.h +++ b/keyboards/delikeeb/vanana/rev1/config.h @@ -19,11 +19,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #define B7_AUDIO -# define RGBLED_NUM 16 -# define RGBLIGHT_HUE_STEP 8 -# define RGBLIGHT_SAT_STEP 8 -# define RGBLIGHT_VAL_STEP 8 -# define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */ //# define RGBLIGHT_EFFECT_BREATHING # define RGBLIGHT_EFFECT_RAINBOW_MOOD # define RGBLIGHT_EFFECT_RAINBOW_SWIRL diff --git a/keyboards/delikeeb/vanana/rev1/info.json b/keyboards/delikeeb/vanana/rev1/info.json index 4a7d4c7718..daf11e6efb 100644 --- a/keyboards/delikeeb/vanana/rev1/info.json +++ b/keyboards/delikeeb/vanana/rev1/info.json @@ -3,6 +3,12 @@ "usb": { "device_version": "0.0.1" }, + "rgblight": { + "saturation_steps": 8, + "brightness_steps": 8, + "led_count": 16, + "sleep": true + }, "ws2812": { "pin": "F0" }, diff --git a/keyboards/delikeeb/vanana/rev2/config.h b/keyboards/delikeeb/vanana/rev2/config.h index 984a14d94f..eee7ef04b4 100644 --- a/keyboards/delikeeb/vanana/rev2/config.h +++ b/keyboards/delikeeb/vanana/rev2/config.h @@ -19,11 +19,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #define B7_AUDIO -# define RGBLED_NUM 16 -# define RGBLIGHT_HUE_STEP 8 -# define RGBLIGHT_SAT_STEP 8 -# define RGBLIGHT_VAL_STEP 8 -# define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */ //# define RGBLIGHT_EFFECT_BREATHING # define RGBLIGHT_EFFECT_RAINBOW_MOOD # define RGBLIGHT_EFFECT_RAINBOW_SWIRL diff --git a/keyboards/delikeeb/vanana/rev2/info.json b/keyboards/delikeeb/vanana/rev2/info.json index e8ff47d855..587dbaeddf 100644 --- a/keyboards/delikeeb/vanana/rev2/info.json +++ b/keyboards/delikeeb/vanana/rev2/info.json @@ -3,6 +3,12 @@ "usb": { "device_version": "0.0.2" }, + "rgblight": { + "saturation_steps": 8, + "brightness_steps": 8, + "led_count": 16, + "sleep": true + }, "ws2812": { "pin": "C7" }, diff --git a/keyboards/delikeeb/waaffle/rev3/config.h b/keyboards/delikeeb/waaffle/rev3/config.h index 36ef7a27bf..c4b1222c02 100644 --- a/keyboards/delikeeb/waaffle/rev3/config.h +++ b/keyboards/delikeeb/waaffle/rev3/config.h @@ -17,11 +17,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #pragma once -# define RGBLED_NUM 10 -# define RGBLIGHT_HUE_STEP 8 -# define RGBLIGHT_SAT_STEP 8 -# define RGBLIGHT_VAL_STEP 8 -# define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */ // # define RGBLIGHT_EFFECT_BREATHING # define RGBLIGHT_EFFECT_RAINBOW_MOOD # define RGBLIGHT_EFFECT_RAINBOW_SWIRL diff --git a/keyboards/delikeeb/waaffle/rev3/info.json b/keyboards/delikeeb/waaffle/rev3/info.json index b251334154..4e7c48ba00 100644 --- a/keyboards/delikeeb/waaffle/rev3/info.json +++ b/keyboards/delikeeb/waaffle/rev3/info.json @@ -8,6 +8,12 @@ "pid": "0x0012", "device_version": "0.0.3" }, + "rgblight": { + "saturation_steps": 8, + "brightness_steps": 8, + "led_count": 10, + "sleep": true + }, "ws2812": { "pin": "C7" }, diff --git a/keyboards/deltasplit75/v2/config.h b/keyboards/deltasplit75/v2/config.h index 4d2439ad3c..9b7700e013 100644 --- a/keyboards/deltasplit75/v2/config.h +++ b/keyboards/deltasplit75/v2/config.h @@ -22,8 +22,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. /* Locking resynchronize hack */ #define LOCKING_RESYNC_ENABLE -#define RGBLED_NUM 12 // Number of LEDs - /* * Feature disable options * These options are also useful to firmware size reduction. diff --git a/keyboards/deltasplit75/v2/info.json b/keyboards/deltasplit75/v2/info.json index 857fa12e9a..d583f3bb65 100644 --- a/keyboards/deltasplit75/v2/info.json +++ b/keyboards/deltasplit75/v2/info.json @@ -15,6 +15,9 @@ "split": { "soft_serial_pin": "D0" }, + "rgblight": { + "led_count": 12 + }, "ws2812": { "pin": "D3" }, diff --git a/keyboards/demiurge/config.h b/keyboards/demiurge/config.h index 2d3108fae3..bd58363c4b 100755 --- a/keyboards/demiurge/config.h +++ b/keyboards/demiurge/config.h @@ -17,7 +17,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #pragma once -#define RGBLED_NUM 21 #define RGBLIGHT_EFFECT_BREATHING #define RGBLIGHT_EFFECT_RAINBOW_MOOD #define RGBLIGHT_EFFECT_RAINBOW_SWIRL diff --git a/keyboards/demiurge/info.json b/keyboards/demiurge/info.json index 88c9381319..f7554aad54 100644 --- a/keyboards/demiurge/info.json +++ b/keyboards/demiurge/info.json @@ -17,6 +17,7 @@ "pin": "F1" }, "rgblight": { + "led_count": 21, "max_brightness": 153 }, "processor": "atmega32u4", diff --git a/keyboards/deng/thirty/rules.mk b/keyboards/deng/thirty/rules.mk index e8ce9e854b..d1753c1e6c 100644 --- a/keyboards/deng/thirty/rules.mk +++ b/keyboards/deng/thirty/rules.mk @@ -1,5 +1,3 @@ -# Enter lower-power sleep mode when on the ChibiOS idle thread -OPT_DEFS += -DCORTEX_ENABLE_WFI_IDLE=TRUE # Wildcard to allow APM32 MCU DFU_SUFFIX_ARGS = -p FFFF -v FFFF diff --git a/keyboards/dinofizz/fnrow/v1/rules.mk b/keyboards/dinofizz/fnrow/v1/rules.mk index 2f7ef9fbe8..a1e56ea486 100644 --- a/keyboards/dinofizz/fnrow/v1/rules.mk +++ b/keyboards/dinofizz/fnrow/v1/rules.mk @@ -11,5 +11,3 @@ BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow AUDIO_ENABLE = no # Audio output -# Enter lower-power sleep mode when on the ChibiOS idle thread -OPT_DEFS += -DCORTEX_ENABLE_WFI_IDLE=TRUE diff --git a/keyboards/dm9records/ergoinu/config.h b/keyboards/dm9records/ergoinu/config.h index 7ca2b8cded..d1c1201a54 100644 --- a/keyboards/dm9records/ergoinu/config.h +++ b/keyboards/dm9records/ergoinu/config.h @@ -24,8 +24,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. // #define MASTER_RIGHT // #define EE_HANDS -#define RGBLED_NUM 7 - #ifndef IOS_DEVICE_ENABLE #if RGBLED_NUM <= 7 #define RGBLIGHT_LIMIT_VAL 255 @@ -36,9 +34,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #define RGBLIGHT_VAL_STEP 4 #endif -#define RGBLIGHT_HUE_STEP 10 -#define RGBLIGHT_SAT_STEP 17 - #if defined(RGBLIGHT_ENABLE) && !defined(IOS_DEVICE_ENABLE) #define USB_MAX_POWER_CONSUMPTION 500 #else diff --git a/keyboards/dm9records/ergoinu/info.json b/keyboards/dm9records/ergoinu/info.json index 1813baa241..4f3b03b6f9 100644 --- a/keyboards/dm9records/ergoinu/info.json +++ b/keyboards/dm9records/ergoinu/info.json @@ -16,6 +16,10 @@ "split": { "soft_serial_pin": "D2" }, + "rgblight": { + "hue_steps": 10, + "led_count": 7 + }, "ws2812": { "pin": "B6" }, diff --git a/keyboards/dmqdesign/spin/config.h b/keyboards/dmqdesign/spin/config.h index 2a1bafaacf..cc43876148 100644 --- a/keyboards/dmqdesign/spin/config.h +++ b/keyboards/dmqdesign/spin/config.h @@ -17,9 +17,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #pragma once -//Number of RGB LEDs -#define RGBLED_NUM 3 - /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ #define LOCKING_SUPPORT_ENABLE /* Locking resynchronize hack */ diff --git a/keyboards/dmqdesign/spin/info.json b/keyboards/dmqdesign/spin/info.json index 52fc9f40ea..aeeb19299e 100644 --- a/keyboards/dmqdesign/spin/info.json +++ b/keyboards/dmqdesign/spin/info.json @@ -20,6 +20,9 @@ {"pin_a": "D6", "pin_b": "D4"} ] }, + "rgblight": { + "led_count": 3 + }, "ws2812": { "pin": "D3" }, diff --git a/keyboards/do60/config.h b/keyboards/do60/config.h index 21160e0a8d..16b0a506b7 100644 --- a/keyboards/do60/config.h +++ b/keyboards/do60/config.h @@ -29,14 +29,8 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #define RGBLIGHT_EFFECT_RGB_TEST #define RGBLIGHT_EFFECT_ALTERNATING #define RGBLIGHT_EFFECT_TWINKLE -#define RGBLED_NUM 20 // Number of LEDs -#define RGBLIGHT_HUE_STEP 10 -#define RGBLIGHT_SAT_STEP 15 -#define RGBLIGHT_VAL_STEP 15 /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ #define LOCKING_SUPPORT_ENABLE /* Locking resynchronize hack */ #define LOCKING_RESYNC_ENABLE - -#define TAPPING_TERM 200 diff --git a/keyboards/do60/info.json b/keyboards/do60/info.json index 9267a98141..2b2b4aaa3b 100644 --- a/keyboards/do60/info.json +++ b/keyboards/do60/info.json @@ -21,6 +21,12 @@ "caps_lock": "B2", "on_state": 0 }, + "rgblight": { + "hue_steps": 10, + "saturation_steps": 15, + "brightness_steps": 15, + "led_count": 20 + }, "ws2812": { "pin": "F5" }, diff --git a/keyboards/doio/kb30/rules.mk b/keyboards/doio/kb30/rules.mk index b12899890e..a6ad4b74ca 100644 --- a/keyboards/doio/kb30/rules.mk +++ b/keyboards/doio/kb30/rules.mk @@ -15,5 +15,3 @@ OLED_ENABLE = yes OLED_DRIVER = SSD1306 ENCODER_ENABLE = yes -# Enter lower-power sleep mode when on the ChibiOS idle thread -OPT_DEFS += -DCORTEX_ENABLE_WFI_IDLE=TRUE diff --git a/keyboards/donutcables/budget96/config.h b/keyboards/donutcables/budget96/config.h index 398b0be3c8..ace3594f48 100644 --- a/keyboards/donutcables/budget96/config.h +++ b/keyboards/donutcables/budget96/config.h @@ -17,9 +17,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #pragma once - -#define RGBLED_NUM 18 - #define RGBLIGHT_EFFECT_BREATHING #define RGBLIGHT_EFFECT_RAINBOW_MOOD #define RGBLIGHT_EFFECT_RAINBOW_SWIRL diff --git a/keyboards/donutcables/budget96/info.json b/keyboards/donutcables/budget96/info.json index 98c878d12f..263174c8ba 100644 --- a/keyboards/donutcables/budget96/info.json +++ b/keyboards/donutcables/budget96/info.json @@ -16,6 +16,9 @@ "backlight": { "pin": "D4" }, + "rgblight": { + "led_count": 18 + }, "ws2812": { "driver": "i2c" }, diff --git a/keyboards/doodboard/duckboard/config.h b/keyboards/doodboard/duckboard/config.h deleted file mode 100644 index a73678faf2..0000000000 --- a/keyboards/doodboard/duckboard/config.h +++ /dev/null @@ -1,24 +0,0 @@ -/* Copyright 2020-2021 doodboard - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see <http://www.gnu.org/licenses/>. - */ - -#pragma once - -/* media key slowdown for windows */ -#define TAP_CODE_DELAY 20 - -#ifdef RGBLIGHT_ENABLE -#define RGBLED_NUM 8 // Number of LEDs -#endif diff --git a/keyboards/doodboard/duckboard/info.json b/keyboards/doodboard/duckboard/info.json index 367a9b7d72..3d45770112 100644 --- a/keyboards/doodboard/duckboard/info.json +++ b/keyboards/doodboard/duckboard/info.json @@ -18,6 +18,12 @@ {"pin_a": "F5", "pin_b": "F6", "resolution": 2} ] }, + "qmk": { + "tap_keycode_delay": 20 + }, + "rgblight": { + "led_count": 8 + }, "ws2812": { "pin": "D3" }, diff --git a/keyboards/doodboard/duckboard_r2/config.h b/keyboards/doodboard/duckboard_r2/config.h deleted file mode 100644 index a73678faf2..0000000000 --- a/keyboards/doodboard/duckboard_r2/config.h +++ /dev/null @@ -1,24 +0,0 @@ -/* Copyright 2020-2021 doodboard - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see <http://www.gnu.org/licenses/>. - */ - -#pragma once - -/* media key slowdown for windows */ -#define TAP_CODE_DELAY 20 - -#ifdef RGBLIGHT_ENABLE -#define RGBLED_NUM 8 // Number of LEDs -#endif diff --git a/keyboards/doodboard/duckboard_r2/info.json b/keyboards/doodboard/duckboard_r2/info.json index 00d0fc6452..4c47e9a70e 100644 --- a/keyboards/doodboard/duckboard_r2/info.json +++ b/keyboards/doodboard/duckboard_r2/info.json @@ -18,6 +18,12 @@ {"pin_a": "F6", "pin_b": "F5", "resolution": 2} ] }, + "qmk": { + "tap_keycode_delay": 20 + }, + "rgblight": { + "led_count": 8 + }, "ws2812": { "pin": "D3" }, diff --git a/keyboards/doppelganger/config.h b/keyboards/doppelganger/config.h index bc64bd9001..a18b484746 100644 --- a/keyboards/doppelganger/config.h +++ b/keyboards/doppelganger/config.h @@ -21,10 +21,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. // #define USE_I2C -#define RGBLED_NUM 2 -#define RGBLIGHT_SPLIT -#define RGBLED_SPLIT { 1, 1 } - /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ #define LOCKING_SUPPORT_ENABLE /* Locking resynchronize hack */ diff --git a/keyboards/doppelganger/info.json b/keyboards/doppelganger/info.json index 83a3e68be7..ea53bfb915 100644 --- a/keyboards/doppelganger/info.json +++ b/keyboards/doppelganger/info.json @@ -22,6 +22,10 @@ } } }, + "rgblight": { + "led_count": 2, + "split_count": [1, 1] + }, "ws2812": { "pin": "B4" }, diff --git a/keyboards/doro67/rgb/config.h b/keyboards/doro67/rgb/config.h index cca3e4d26f..e18a231380 100644 --- a/keyboards/doro67/rgb/config.h +++ b/keyboards/doro67/rgb/config.h @@ -70,8 +70,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #define ENABLE_RGB_MATRIX_SOLID_SPLASH #define ENABLE_RGB_MATRIX_SOLID_MULTISPLASH -#define RGBLED_NUM 67 - /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ #define LOCKING_SUPPORT_ENABLE /* Locking resynchronize hack */ diff --git a/keyboards/dp60/config.h b/keyboards/dp60/config.h index b1518cb5fb..7ccd630c74 100644 --- a/keyboards/dp60/config.h +++ b/keyboards/dp60/config.h @@ -33,7 +33,6 @@ //#define NO_PRINT //rgb light setting -#define RGBLED_NUM 18 #define RGBLIGHT_EFFECT_BREATHING #define RGBLIGHT_EFFECT_RAINBOW_MOOD #define RGBLIGHT_EFFECT_RAINBOW_SWIRL @@ -44,9 +43,6 @@ #define RGBLIGHT_EFFECT_RGB_TEST #define RGBLIGHT_EFFECT_ALTERNATING #define RGBLIGHT_EFFECT_TWINKLE -#define RGBLIGHT_HUE_STEP 8 -#define RGBLIGHT_SAT_STEP 8 -#define RGBLIGHT_VAL_STEP 8 //rgb matrix setting #define DRIVER_ADDR_1 0b1110100 diff --git a/keyboards/dp60/info.json b/keyboards/dp60/info.json index 625ca2a238..4433544708 100644 --- a/keyboards/dp60/info.json +++ b/keyboards/dp60/info.json @@ -8,6 +8,11 @@ "pid": "0x00BE", "device_version": "0.0.1" }, + "rgblight": { + "saturation_steps": 8, + "brightness_steps": 8, + "led_count": 18 + }, "ws2812": { "pin": "D7" }, diff --git a/keyboards/draculad/config.h b/keyboards/draculad/config.h index a9f78283d0..233c7b35ec 100644 --- a/keyboards/draculad/config.h +++ b/keyboards/draculad/config.h @@ -26,12 +26,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #define RGBLIGHT_EFFECT_RAINBOW_MOOD #define RGBLIGHT_EFFECT_STATIC_GRADIENT #define RGBLIGHT_EFFECT_BREATHING -#define RGBLED_NUM 10 -#define RGBLIGHT_SPLIT -#define RGBLIGHT_HUE_STEP 8 -#define RGBLIGHT_SAT_STEP 8 -#define RGBLIGHT_VAL_STEP 8 -#define RGBLIGHT_SLEEP #define EE_HANDS diff --git a/keyboards/draculad/info.json b/keyboards/draculad/info.json index 57250d57ef..3c2b022be6 100644 --- a/keyboards/draculad/info.json +++ b/keyboards/draculad/info.json @@ -8,6 +8,13 @@ "pid": "0x1B1E", "device_version": "0.0.1" }, + "rgblight": { + "saturation_steps": 8, + "brightness_steps": 8, + "led_count": 10, + "sleep": true, + "split": true + }, "ws2812": { "pin": "D3" }, diff --git a/keyboards/draytronics/daisy/config.h b/keyboards/draytronics/daisy/config.h index 7b12915393..398395b40a 100644 --- a/keyboards/draytronics/daisy/config.h +++ b/keyboards/draytronics/daisy/config.h @@ -18,8 +18,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #pragma once -#define TAP_CODE_DELAY 10 - /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ #define LOCKING_SUPPORT_ENABLE /* Locking resynchronize hack */ @@ -39,11 +37,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. //#define NO_ACTION_ONESHOT //Underglow - #define RGBLED_NUM 4 - #define RGBLIGHT_HUE_STEP 8 - #define RGBLIGHT_SAT_STEP 8 - #define RGBLIGHT_VAL_STEP 8 - #define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */ /*== all animations enable ==*/ #define RGBLIGHT_EFFECT_BREATHING #define RGBLIGHT_EFFECT_RAINBOW_MOOD diff --git a/keyboards/draytronics/daisy/info.json b/keyboards/draytronics/daisy/info.json index ae0579b667..ad5244159e 100644 --- a/keyboards/draytronics/daisy/info.json +++ b/keyboards/draytronics/daisy/info.json @@ -19,6 +19,15 @@ {"pin_a": "D0", "pin_b": "D1"} ] }, + "qmk": { + "tap_keycode_delay": 10 + }, + "rgblight": { + "saturation_steps": 8, + "brightness_steps": 8, + "led_count": 4, + "sleep": true + }, "ws2812": { "pin": "D4" }, diff --git a/keyboards/draytronics/elise/config.h b/keyboards/draytronics/elise/config.h index 9d35099552..717fe910e8 100644 --- a/keyboards/draytronics/elise/config.h +++ b/keyboards/draytronics/elise/config.h @@ -24,11 +24,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #define LOCKING_RESYNC_ENABLE // ws2812 options - #define RGBLED_NUM 7 - #define RGBLIGHT_HUE_STEP 8 - #define RGBLIGHT_SAT_STEP 8 - #define RGBLIGHT_VAL_STEP 8 - #define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */ /*== all animations enable ==*/ #define RGBLIGHT_EFFECT_BREATHING #define RGBLIGHT_EFFECT_RAINBOW_MOOD diff --git a/keyboards/draytronics/elise/info.json b/keyboards/draytronics/elise/info.json index 81be5cffd7..4da4c88e11 100644 --- a/keyboards/draytronics/elise/info.json +++ b/keyboards/draytronics/elise/info.json @@ -13,6 +13,12 @@ "rows": ["B2", "B3", "B1", "F0", "F1"] }, "diode_direction": "COL2ROW", + "rgblight": { + "saturation_steps": 8, + "brightness_steps": 8, + "led_count": 7, + "sleep": true + }, "ws2812": { "pin": "D1" }, diff --git a/keyboards/draytronics/elise_v2/config.h b/keyboards/draytronics/elise_v2/config.h index fdbdb23ce4..717fe910e8 100644 --- a/keyboards/draytronics/elise_v2/config.h +++ b/keyboards/draytronics/elise_v2/config.h @@ -24,11 +24,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #define LOCKING_RESYNC_ENABLE // ws2812 options - #define RGBLED_NUM 16 - #define RGBLIGHT_HUE_STEP 8 - #define RGBLIGHT_SAT_STEP 8 - #define RGBLIGHT_VAL_STEP 8 - #define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */ /*== all animations enable ==*/ #define RGBLIGHT_EFFECT_BREATHING #define RGBLIGHT_EFFECT_RAINBOW_MOOD diff --git a/keyboards/draytronics/elise_v2/info.json b/keyboards/draytronics/elise_v2/info.json index faef95cbee..eefce17778 100644 --- a/keyboards/draytronics/elise_v2/info.json +++ b/keyboards/draytronics/elise_v2/info.json @@ -8,6 +8,12 @@ "pid": "0x454C", "device_version": "2.0.0" }, + "rgblight": { + "saturation_steps": 8, + "brightness_steps": 8, + "led_count": 16, + "sleep": true + }, "ws2812": { "pin": "D1" }, diff --git a/keyboards/drop/thekey/v2/config.h b/keyboards/drop/thekey/v2/config.h deleted file mode 100644 index ca6944c2c9..0000000000 --- a/keyboards/drop/thekey/v2/config.h +++ /dev/null @@ -1,5 +0,0 @@ -// Copyright 2023 Massdrop, Inc. -// SPDX-License-Identifier: GPL-2.0-or-later -#pragma once - -#define RGBLIGHT_LED_MAP {4, 0, 1, 2, 3} diff --git a/keyboards/drop/thekey/v2/info.json b/keyboards/drop/thekey/v2/info.json index 7870599fe1..ced9901bea 100644 --- a/keyboards/drop/thekey/v2/info.json +++ b/keyboards/drop/thekey/v2/info.json @@ -25,6 +25,7 @@ "diode_direction": "ROW2COL", "rgblight": { "led_count": 5, + "led_map": [4, 0, 1, 2, 3], "sleep": true, "animations": { "alternating": true, diff --git a/keyboards/duck/eagle_viper/v2/config.h b/keyboards/duck/eagle_viper/v2/config.h index e39099ef56..68f0ffa60f 100644 --- a/keyboards/duck/eagle_viper/v2/config.h +++ b/keyboards/duck/eagle_viper/v2/config.h @@ -34,6 +34,3 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #define RGBLIGHT_EFFECT_RGB_TEST #define RGBLIGHT_EFFECT_ALTERNATING #define RGBLIGHT_EFFECT_TWINKLE -#define RGBLED_NUM 17 - -#define TAPPING_TERM 200 diff --git a/keyboards/duck/eagle_viper/v2/info.json b/keyboards/duck/eagle_viper/v2/info.json index 4d6019ddba..0352ab4760 100644 --- a/keyboards/duck/eagle_viper/v2/info.json +++ b/keyboards/duck/eagle_viper/v2/info.json @@ -12,6 +12,9 @@ "bootmagic": { "matrix": [4, 10] }, + "rgblight": { + "led_count": 17 + }, "ws2812": { "pin": "D6" }, diff --git a/keyboards/duck/jetfire/config.h b/keyboards/duck/jetfire/config.h index 95459e67b1..426f673b05 100644 --- a/keyboards/duck/jetfire/config.h +++ b/keyboards/duck/jetfire/config.h @@ -35,7 +35,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #define RGBLIGHT_EFFECT_RGB_TEST #define RGBLIGHT_EFFECT_ALTERNATING #define RGBLIGHT_EFFECT_TWINKLE -#define RGBLED_NUM 23 /* * Feature disable options diff --git a/keyboards/duck/jetfire/info.json b/keyboards/duck/jetfire/info.json index 287ab0ac4a..8c0a02dd7b 100644 --- a/keyboards/duck/jetfire/info.json +++ b/keyboards/duck/jetfire/info.json @@ -15,6 +15,9 @@ "bootmagic": { "matrix": [5, 10] }, + "rgblight": { + "led_count": 23 + }, "ws2812": { "pin": "D6" }, diff --git a/keyboards/duck/lightsaver/config.h b/keyboards/duck/lightsaver/config.h index cb5a419f56..07a54c3ca8 100644 --- a/keyboards/duck/lightsaver/config.h +++ b/keyboards/duck/lightsaver/config.h @@ -34,6 +34,3 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #define RGBLIGHT_EFFECT_RGB_TEST #define RGBLIGHT_EFFECT_ALTERNATING #define RGBLIGHT_EFFECT_TWINKLE -#define RGBLED_NUM 17 - -#define TAPPING_TERM 200 diff --git a/keyboards/duck/lightsaver/info.json b/keyboards/duck/lightsaver/info.json index 296820d7ca..6c77c26bf0 100644 --- a/keyboards/duck/lightsaver/info.json +++ b/keyboards/duck/lightsaver/info.json @@ -15,6 +15,9 @@ "bootmagic": { "matrix": [5, 10] }, + "rgblight": { + "led_count": 17 + }, "ws2812": { "pin": "D6" }, diff --git a/keyboards/duck/octagon/v1/config.h b/keyboards/duck/octagon/v1/config.h index 9b557edaba..f0e8b748f0 100644 --- a/keyboards/duck/octagon/v1/config.h +++ b/keyboards/duck/octagon/v1/config.h @@ -34,6 +34,3 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #define RGBLIGHT_EFFECT_RGB_TEST #define RGBLIGHT_EFFECT_ALTERNATING #define RGBLIGHT_EFFECT_TWINKLE -#define RGBLED_NUM 17 - -#define TAPPING_TERM 200 diff --git a/keyboards/duck/octagon/v1/info.json b/keyboards/duck/octagon/v1/info.json index 8186ce878e..2f07bbcb6d 100644 --- a/keyboards/duck/octagon/v1/info.json +++ b/keyboards/duck/octagon/v1/info.json @@ -15,6 +15,9 @@ "bootmagic": { "matrix": [5, 10] }, + "rgblight": { + "led_count": 17 + }, "ws2812": { "pin": "D6" }, diff --git a/keyboards/duck/octagon/v1/v1.c b/keyboards/duck/octagon/v1/v1.c index dc3b7fc728..35aea54456 100644 --- a/keyboards/duck/octagon/v1/v1.c +++ b/keyboards/duck/octagon/v1/v1.c @@ -43,8 +43,8 @@ void backlight_set(uint8_t level) { bool led_update_kb(led_t led_state) { bool res = led_update_user(led_state); if(res) { - backlight_os_state & (1<<USB_LED_CAPS_LOCK) ? (PORTB &= ~0b00000001) : (PORTB |= 0b00000001); - backlight_os_state & (1<<USB_LED_SCROLL_LOCK) ? (PORTB &= ~0b00010000) : (PORTB |= 0b00010000); + backlight_os_state & 2 ? (PORTB &= ~0b00000001) : (PORTB |= 0b00000001); + backlight_os_state & 4 ? (PORTB &= ~0b00010000) : (PORTB |= 0b00010000); } return res; } diff --git a/keyboards/duck/octagon/v2/config.h b/keyboards/duck/octagon/v2/config.h index 2530cedc0f..56b5aea64d 100644 --- a/keyboards/duck/octagon/v2/config.h +++ b/keyboards/duck/octagon/v2/config.h @@ -34,6 +34,3 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #define RGBLIGHT_EFFECT_RGB_TEST #define RGBLIGHT_EFFECT_ALTERNATING #define RGBLIGHT_EFFECT_TWINKLE -#define RGBLED_NUM 17 - -#define TAPPING_TERM 200 diff --git a/keyboards/duck/octagon/v2/info.json b/keyboards/duck/octagon/v2/info.json index f3bd30fbe5..53c8c629a6 100644 --- a/keyboards/duck/octagon/v2/info.json +++ b/keyboards/duck/octagon/v2/info.json @@ -15,6 +15,9 @@ "bootmagic": { "matrix": [5, 10] }, + "rgblight": { + "led_count": 17 + }, "ws2812": { "pin": "D6" }, diff --git a/keyboards/duck/octagon/v2/v2.c b/keyboards/duck/octagon/v2/v2.c index 612df9aa3e..7a3ad76027 100644 --- a/keyboards/duck/octagon/v2/v2.c +++ b/keyboards/duck/octagon/v2/v2.c @@ -101,17 +101,17 @@ bool led_update_kb(led_t led_state) { bool res = led_update_user(led_state); if(res) { bool status[7] = { - backlight_os_state & (1<<USB_LED_CAPS_LOCK), - backlight_os_state & (1<<USB_LED_SCROLL_LOCK), - backlight_os_state & (1<<USB_LED_NUM_LOCK), + backlight_os_state & 2, + backlight_os_state & 4, + backlight_os_state & 1, backlight_layer_state & (1<<1), backlight_layer_state & (1<<2), backlight_layer_state & (1<<3), backlight_layer_state & (1<<4) }; indicator_leds_set(status); - backlight_os_state & (1<<USB_LED_CAPS_LOCK) ? (PORTB &= ~0b00000001) : (PORTB |= 0b00000001); - backlight_os_state & (1<<USB_LED_SCROLL_LOCK) ? (PORTB &= ~0b00010000) : (PORTB |= 0b00010000); + backlight_os_state & 2 ? (PORTB &= ~0b00000001) : (PORTB |= 0b00000001); + backlight_os_state & 4 ? (PORTB &= ~0b00010000) : (PORTB |= 0b00010000); } return res; } diff --git a/keyboards/duck/orion/v3/config.h b/keyboards/duck/orion/v3/config.h index e8d87e0719..57327932f6 100644 --- a/keyboards/duck/orion/v3/config.h +++ b/keyboards/duck/orion/v3/config.h @@ -34,6 +34,3 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #define RGBLIGHT_EFFECT_RGB_TEST #define RGBLIGHT_EFFECT_ALTERNATING #define RGBLIGHT_EFFECT_TWINKLE -#define RGBLED_NUM 18 - -#define TAPPING_TERM 200 diff --git a/keyboards/duck/orion/v3/info.json b/keyboards/duck/orion/v3/info.json index eff1e5f88c..d7de16e7c9 100644 --- a/keyboards/duck/orion/v3/info.json +++ b/keyboards/duck/orion/v3/info.json @@ -16,6 +16,9 @@ "bootmagic": { "matrix": [4, 10] }, + "rgblight": { + "led_count": 18 + }, "ws2812": { "pin": "D6" }, diff --git a/keyboards/duck/tcv3/config.h b/keyboards/duck/tcv3/config.h index 13f2d76139..ed75effe40 100644 --- a/keyboards/duck/tcv3/config.h +++ b/keyboards/duck/tcv3/config.h @@ -34,4 +34,3 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #define RGBLIGHT_EFFECT_RGB_TEST #define RGBLIGHT_EFFECT_ALTERNATING #define RGBLIGHT_EFFECT_TWINKLE -#define RGBLED_NUM 17 diff --git a/keyboards/duck/tcv3/info.json b/keyboards/duck/tcv3/info.json index 69f1033d22..6b4a650596 100644 --- a/keyboards/duck/tcv3/info.json +++ b/keyboards/duck/tcv3/info.json @@ -11,6 +11,9 @@ "bootmagic": { "matrix": [5, 10] }, + "rgblight": { + "led_count": 17 + }, "ws2812": { "pin": "D6" }, diff --git a/keyboards/duck/tcv3/tcv3.c b/keyboards/duck/tcv3/tcv3.c index ab89e180c0..87b22443e4 100644 --- a/keyboards/duck/tcv3/tcv3.c +++ b/keyboards/duck/tcv3/tcv3.c @@ -24,69 +24,6 @@ enum BACKLIGHT_AREAS { BACKLIGHT_SWITCH = 0b0001111 }; -// uint8_t backlight_rgb_r = 255; -// uint8_t backlight_rgb_g = 0; -// uint8_t backlight_rgb_b = 0; -// uint8_t backlight_os_state = 0; -// uint32_t backlight_layer_state = 0; - -// void backlight_toggle_rgb(bool enabled) -// { -// if(enabled) { -// uint8_t rgb[17][3] = { -// {backlight_rgb_r, backlight_rgb_g, backlight_rgb_b}, -// {backlight_rgb_r, backlight_rgb_g, backlight_rgb_b}, -// {backlight_rgb_r, backlight_rgb_g, backlight_rgb_b}, -// {backlight_rgb_r, backlight_rgb_g, backlight_rgb_b}, -// {backlight_rgb_r, backlight_rgb_g, backlight_rgb_b}, -// {backlight_rgb_r, backlight_rgb_g, backlight_rgb_b}, -// {backlight_rgb_r, backlight_rgb_g, backlight_rgb_b}, -// {backlight_rgb_r, backlight_rgb_g, backlight_rgb_b}, -// {backlight_rgb_r, backlight_rgb_g, backlight_rgb_b}, -// {backlight_rgb_r, backlight_rgb_g, backlight_rgb_b}, -// {backlight_rgb_r, backlight_rgb_g, backlight_rgb_b}, -// {backlight_rgb_r, backlight_rgb_g, backlight_rgb_b}, -// {backlight_rgb_r, backlight_rgb_g, backlight_rgb_b}, -// {backlight_rgb_r, backlight_rgb_g, backlight_rgb_b}, -// {backlight_rgb_r, backlight_rgb_g, backlight_rgb_b}, -// {backlight_rgb_r, backlight_rgb_g, backlight_rgb_b}, -// {backlight_rgb_r, backlight_rgb_g, backlight_rgb_b} -// }; -// backlight_set_rgb(rgb); -// } else { -// uint8_t rgb[17][3] = { -// {0, 0, 0}, -// {0, 0, 0}, -// {0, 0, 0}, -// {0, 0, 0}, -// {0, 0, 0}, -// {0, 0, 0}, -// {0, 0, 0}, -// {0, 0, 0}, -// {0, 0, 0}, -// {0, 0, 0}, -// {0, 0, 0}, -// {0, 0, 0}, -// {0, 0, 0}, -// {0, 0, 0}, -// {0, 0, 0}, -// {0, 0, 0}, -// {0, 0, 0} -// }; -// backlight_set_rgb(rgb); -// } -// } - -// void backlight_set_rgb(uint8_t cfg[17][3]) -// { -// cli(); -// for(uint8_t i = 0; i < 17; ++i) { -// send_color(cfg[i][0], cfg[i][1], cfg[i][2], Device_PCBRGB); -// } -// sei(); -// show(); -// } - // Q5, Q6, Q7 is connected to B1 - alphas // Q8, Q9 is connected to B2 - frow // Q1, Q2, Q3 is connected to B3 - mods @@ -99,26 +36,6 @@ void backlight_set(uint8_t level) { level & BACKLIGHT_MACRO ? (PORTE |= 0b01000000) : (PORTE &= ~0b01000000); } -// // Port from backlight_update_state -// bool led_update_kb(led_t led_state) { -// bool res = led_update_user(led_state); -// if(res) { -// bool status[7] = { -// backlight_os_state & (1<<USB_LED_CAPS_LOCK), -// backlight_os_state & (1<<USB_LED_SCROLL_LOCK), -// backlight_os_state & (1<<USB_LED_NUM_LOCK), -// backlight_layer_state & (1<<1), -// backlight_layer_state & (1<<2), -// backlight_layer_state & (1<<3), -// backlight_layer_state & (1<<4) -// }; -// indicator_leds_set(status); -// backlight_os_state & (1<<USB_LED_CAPS_LOCK) ? (PORTB &= ~0b00000001) : (PORTB |= 0b00000001); -// backlight_os_state & (1<<USB_LED_SCROLL_LOCK) ? (PORTB &= ~0b00010000) : (PORTB |= 0b00010000); -// } -// return res; -// } - // U5 Pin 1, 2, 3 connected to top left LEDs // U6 Pin 1, 2, 3 connected to bottom right leds col of 3 diff --git a/keyboards/ducky/one2mini/1861st/rules.mk b/keyboards/ducky/one2mini/1861st/rules.mk index a5b4708b26..b7db490c11 100644 --- a/keyboards/ducky/one2mini/1861st/rules.mk +++ b/keyboards/ducky/one2mini/1861st/rules.mk @@ -30,5 +30,3 @@ RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow AUDIO_ENABLE = no # Audio output DIP_SWITCH_ENABLE = yes -# Enter lower-power sleep mode when on the ChibiOS idle thread -OPT_DEFS += -DCORTEX_ENABLE_WFI_IDLE=TRUE diff --git a/keyboards/ducky/one2sf/1967st/rules.mk b/keyboards/ducky/one2sf/1967st/rules.mk index a5b4708b26..b7db490c11 100644 --- a/keyboards/ducky/one2sf/1967st/rules.mk +++ b/keyboards/ducky/one2sf/1967st/rules.mk @@ -30,5 +30,3 @@ RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow AUDIO_ENABLE = no # Audio output DIP_SWITCH_ENABLE = yes -# Enter lower-power sleep mode when on the ChibiOS idle thread -OPT_DEFS += -DCORTEX_ENABLE_WFI_IDLE=TRUE diff --git a/keyboards/dumbpad/config.h b/keyboards/dumbpad/config.h deleted file mode 100644 index 879046ea07..0000000000 --- a/keyboards/dumbpad/config.h +++ /dev/null @@ -1,20 +0,0 @@ -/* -Copyright 2020 imchipwood - -This program is free software: you can redistribute it and/or modify -it under the terms of the GNU General Public License as published by -the Free Software Foundation, either version 2 of the License, or -(at your option) any later version. - -This program is distributed in the hope that it will be useful, -but WITHOUT ANY WARRANTY; without even the implied warranty of -MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -GNU General Public License for more details. - -You should have received a copy of the GNU General Public License -along with this program. If not, see <http://www.gnu.org/licenses/>. -*/ -#pragma once - -/* Reduce tapdance required taps from 5 to 2 */ -#define TAPPING_TOGGLE 2 diff --git a/keyboards/dumbpad/info.json b/keyboards/dumbpad/info.json index 341a1bcf8b..605d90fbb4 100644 --- a/keyboards/dumbpad/info.json +++ b/keyboards/dumbpad/info.json @@ -6,5 +6,8 @@ "usb": { "vid": "0xDEAF", "pid": "0x0913" + }, + "tapping": { + "toggle": 2 } } diff --git a/keyboards/dumbpad/v1x_oled/config.h b/keyboards/dumbpad/v1x_oled/config.h deleted file mode 100644 index 1293e85979..0000000000 --- a/keyboards/dumbpad/v1x_oled/config.h +++ /dev/null @@ -1,17 +0,0 @@ -/* -Copyright 2020 imchipwood -This program is free software: you can redistribute it and/or modify -it under the terms of the GNU General Public License as published by -the Free Software Foundation, either version 2 of the License, or -(at your option) any later version. -This program is distributed in the hope that it will be useful, -but WITHOUT ANY WARRANTY; without even the implied warranty of -MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -GNU General Public License for more details. -You should have received a copy of the GNU General Public License -along with this program. If not, see <http://www.gnu.org/licenses/>. -*/ -#pragma once - -/* Reduce tapdance required taps from 5 to 2 */ -#define TAPPING_TOGGLE 2 diff --git a/keyboards/dumbpad/v3x/config.h b/keyboards/dumbpad/v3x/config.h index 1944244c3b..7667bb39d0 100644 --- a/keyboards/dumbpad/v3x/config.h +++ b/keyboards/dumbpad/v3x/config.h @@ -26,7 +26,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. // Cleanup RGB #ifdef RGB_MATRIX_ENABLE -#define RGB_MATRIX_TIMEOUT 300000 // 5 minutes (5 * 60 * 1000ms) #define RGB_DISABLE_WHEN_USB_SUSPENDED #define RGB_MATRIX_FRAMEBUFFER_EFFECTS // Heatmap, Rain diff --git a/keyboards/dumbpad/v3x/info.json b/keyboards/dumbpad/v3x/info.json index 5be344c17b..463fa5ec9c 100644 --- a/keyboards/dumbpad/v3x/info.json +++ b/keyboards/dumbpad/v3x/info.json @@ -6,7 +6,8 @@ "device_version": "0.1.0" }, "rgb_matrix": { - "driver": "WS2812" + "driver": "WS2812", + "timeout": 300000 }, "matrix_pins": { "cols": ["C6", "D7", "E6", "B4", "B5"], diff --git a/keyboards/durgod/k320/keymaps/kuenhlee/keymap.c b/keyboards/durgod/k320/keymaps/kuenhlee/keymap.c index 7f49352de4..4092126d7f 100644 --- a/keyboards/durgod/k320/keymaps/kuenhlee/keymap.c +++ b/keyboards/durgod/k320/keymaps/kuenhlee/keymap.c @@ -132,11 +132,11 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { [_UL] = LAYOUT_tkl_ansi( /* Unicode Layer */ XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, - X(APPR), X(NEQU), X(POW2), X(POW3), XXXXXXX, XXXXXXX, X(BSQR), X(WSQR), X(INFI), X(BDOT), X(WDOT), XXXXXXX, X(PONE), XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, - XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, X(SUM), XXXXXXX, X(MYU), X(SAME), XXXXXXX, X(OHM), X(DLAR), X(DRAR), XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, - XXXXXXX, XXXXXXX, X(SQRT), X(DELT), XXXXXXX, XXXXXXX, X(THFR), XXXXXXX, XXXXXXX, XXXXXXX, X(THET), X(DEGR), XXXXXXX, - XXXXXXX, XXXXXXX, XXXXXXX, X(COPY), XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, X(LTOE), X(MTOE), X(DIV), XXXXXXX, X(UARR), - XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, KC_TRNS, KC_TRNS, XXXXXXX, X(LARR), X(DARR), X(RARR) + UM(APPR), UM(NEQU), UM(POW2), UM(POW3), XXXXXXX, XXXXXXX, UM(BSQR), UM(WSQR), UM(INFI), UM(BDOT), UM(WDOT), XXXXXXX, UM(PONE), XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, + XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, UM(SUM), XXXXXXX, UM(MYU), UM(SAME), XXXXXXX, UM(OHM), UM(DLAR), UM(DRAR), XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, + XXXXXXX, XXXXXXX, UM(SQRT), UM(DELT), XXXXXXX, XXXXXXX, UM(THFR), XXXXXXX, XXXXXXX, XXXXXXX, UM(THET), UM(DEGR), XXXXXXX, + XXXXXXX, XXXXXXX, XXXXXXX, UM(COPY), XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, UM(LTOE), UM(MTOE), UM(DIV), XXXXXXX, UM(UARR), + XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, KC_TRNS, KC_TRNS, XXXXXXX, UM(LARR), UM(DARR), UM(RARR) ) }; diff --git a/keyboards/dyz/dyz40/config.h b/keyboards/dyz/dyz40/config.h index 87e057133d..7e7ca8b694 100644 --- a/keyboards/dyz/dyz40/config.h +++ b/keyboards/dyz/dyz40/config.h @@ -17,6 +17,4 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #pragma once -#define TAP_CODE_DELAY 10 // Need this delay for some keys like VOLD/VOLU to work - #define DYNAMIC_KEYMAP_LAYER_COUNT 3 diff --git a/keyboards/dyz/dyz40/info.json b/keyboards/dyz/dyz40/info.json index bb54647fed..fdd14a7c42 100644 --- a/keyboards/dyz/dyz40/info.json +++ b/keyboards/dyz/dyz40/info.json @@ -13,6 +13,9 @@ {"pin_a": "D1", "pin_b": "D0"} ] }, + "qmk": { + "tap_keycode_delay": 10 + }, "rgblight": { "led_count": 13, "hue_steps": 10, diff --git a/keyboards/dyz/dyz60/config.h b/keyboards/dyz/dyz60/config.h index 87e057133d..7e7ca8b694 100644 --- a/keyboards/dyz/dyz60/config.h +++ b/keyboards/dyz/dyz60/config.h @@ -17,6 +17,4 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #pragma once -#define TAP_CODE_DELAY 10 // Need this delay for some keys like VOLD/VOLU to work - #define DYNAMIC_KEYMAP_LAYER_COUNT 3 diff --git a/keyboards/dyz/dyz60/info.json b/keyboards/dyz/dyz60/info.json index 05e0a2dae7..28300d7914 100644 --- a/keyboards/dyz/dyz60/info.json +++ b/keyboards/dyz/dyz60/info.json @@ -39,6 +39,9 @@ {"pin_a": "D0", "pin_b": "D1"} ] }, + "qmk": { + "tap_keycode_delay": 10 + }, "indicators": { "caps_lock": "F1" }, diff --git a/keyboards/dyz/dyz60_hs/config.h b/keyboards/dyz/dyz60_hs/config.h index 4dd98dcbdf..7e7ca8b694 100644 --- a/keyboards/dyz/dyz60_hs/config.h +++ b/keyboards/dyz/dyz60_hs/config.h @@ -17,5 +17,4 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #pragma once -#define TAP_CODE_DELAY 10 // Need this delay for some keys like VOLD/VOLU to work #define DYNAMIC_KEYMAP_LAYER_COUNT 3 diff --git a/keyboards/dyz/dyz60_hs/info.json b/keyboards/dyz/dyz60_hs/info.json index c23b0dca6a..598f236980 100644 --- a/keyboards/dyz/dyz60_hs/info.json +++ b/keyboards/dyz/dyz60_hs/info.json @@ -37,6 +37,9 @@ "pid": "0x001A", "device_version": "0.0.1" }, + "qmk": { + "tap_keycode_delay": 10 + }, "processor": "atmega32u4", "bootloader": "atmel-dfu", "community_layouts": ["60_ansi", "60_ansi_split_bs_rshift", "60_tsangan_hhkb", "60_iso", "60_iso_split_bs_rshift"], diff --git a/keyboards/dyz/dyz_tkl/config.h b/keyboards/dyz/dyz_tkl/config.h index 87e057133d..7e7ca8b694 100644 --- a/keyboards/dyz/dyz_tkl/config.h +++ b/keyboards/dyz/dyz_tkl/config.h @@ -17,6 +17,4 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #pragma once -#define TAP_CODE_DELAY 10 // Need this delay for some keys like VOLD/VOLU to work - #define DYNAMIC_KEYMAP_LAYER_COUNT 3 diff --git a/keyboards/dyz/dyz_tkl/info.json b/keyboards/dyz/dyz_tkl/info.json index c44e9b585c..298611a742 100644 --- a/keyboards/dyz/dyz_tkl/info.json +++ b/keyboards/dyz/dyz_tkl/info.json @@ -34,6 +34,9 @@ "indicators": { "caps_lock": "D2" }, + "qmk": { + "tap_keycode_delay": 10 + }, "processor": "atmega32u4", "bootloader": "atmel-dfu", "community_layouts": ["tkl_f13_ansi", "tkl_f13_iso"], diff --git a/keyboards/dyz/selka40/config.h b/keyboards/dyz/selka40/config.h index 87e057133d..7e7ca8b694 100644 --- a/keyboards/dyz/selka40/config.h +++ b/keyboards/dyz/selka40/config.h @@ -17,6 +17,4 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #pragma once -#define TAP_CODE_DELAY 10 // Need this delay for some keys like VOLD/VOLU to work - #define DYNAMIC_KEYMAP_LAYER_COUNT 3 diff --git a/keyboards/dyz/selka40/info.json b/keyboards/dyz/selka40/info.json index 8fe32e5071..95ac00a883 100644 --- a/keyboards/dyz/selka40/info.json +++ b/keyboards/dyz/selka40/info.json @@ -39,6 +39,9 @@ {"pin_a": "D6", "pin_b": "D7"} ] }, + "qmk": { + "tap_keycode_delay": 10 + }, "indicators": { "caps_lock": "B1", "num_lock": "B3", diff --git a/keyboards/dz60/config.h b/keyboards/dz60/config.h index 98673bdef0..f6a95047ff 100644 --- a/keyboards/dz60/config.h +++ b/keyboards/dz60/config.h @@ -10,11 +10,6 @@ # define RGBLIGHT_EFFECT_RGB_TEST # define RGBLIGHT_EFFECT_ALTERNATING # define RGBLIGHT_EFFECT_TWINKLE -# define RGBLED_NUM 16 -# define RGBLIGHT_HUE_STEP 8 -# define RGBLIGHT_SAT_STEP 8 -# define RGBLIGHT_VAL_STEP 8 -# define RGBLIGHT_SLEEP /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ #define LOCKING_SUPPORT_ENABLE diff --git a/keyboards/dz60/info.json b/keyboards/dz60/info.json index 4c5fb59d2e..6d35b3255e 100644 --- a/keyboards/dz60/info.json +++ b/keyboards/dz60/info.json @@ -21,6 +21,12 @@ "caps_lock": "B2", "on_state": 0 }, + "rgblight": { + "saturation_steps": 8, + "brightness_steps": 8, + "led_count": 16, + "sleep": true + }, "ws2812": { "pin": "E2" }, diff --git a/keyboards/dz60/keymaps/muzfuz/keymap.c b/keyboards/dz60/keymaps/muzfuz/keymap.c index 36b843d459..1a71b9bb86 100644 --- a/keyboards/dz60/keymaps/muzfuz/keymap.c +++ b/keyboards/dz60/keymaps/muzfuz/keymap.c @@ -25,38 +25,13 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______), }; -void led_set_user(uint8_t usb_led) { - - if (usb_led & (1 << USB_LED_NUM_LOCK)) { - - } else { - - } - - if (usb_led & (1 << USB_LED_CAPS_LOCK)) { +bool led_update_user(led_t led_state) { + if (led_state.caps_lock) { DDRB |= (1 << 2); PORTB &= ~(1 << 2); } else { DDRB &= ~(1 << 2); PORTB &= ~(1 << 2); } - - if (usb_led & (1 << USB_LED_SCROLL_LOCK)) { - - } else { - - } - - if (usb_led & (1 << USB_LED_COMPOSE)) { - - } else { - - } - - if (usb_led & (1 << USB_LED_KANA)) { - - } else { - - } - + return false; } bool process_record_user(uint16_t keycode, keyrecord_t *record) diff --git a/keyboards/dztech/bocc/config.h b/keyboards/dztech/bocc/config.h index ba8626e95c..e9e3ebcb75 100644 --- a/keyboards/dztech/bocc/config.h +++ b/keyboards/dztech/bocc/config.h @@ -25,11 +25,6 @@ # define RGBLIGHT_EFFECT_RGB_TEST # define RGBLIGHT_EFFECT_ALTERNATING # define RGBLIGHT_EFFECT_TWINKLE -# define RGBLED_NUM 20 -# define RGBLIGHT_HUE_STEP 8 -# define RGBLIGHT_SAT_STEP 8 -# define RGBLIGHT_VAL_STEP 8 -# define RGBLIGHT_SLEEP /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ #define LOCKING_SUPPORT_ENABLE diff --git a/keyboards/dztech/bocc/info.json b/keyboards/dztech/bocc/info.json index 525ec93947..8d333c9063 100644 --- a/keyboards/dztech/bocc/info.json +++ b/keyboards/dztech/bocc/info.json @@ -17,6 +17,12 @@ "pin": "B7", "levels": 5 }, + "rgblight": { + "saturation_steps": 8, + "brightness_steps": 8, + "led_count": 20, + "sleep": true + }, "ws2812": { "pin": "E2" }, diff --git a/keyboards/dztech/duo_s/config.h b/keyboards/dztech/duo_s/config.h index 4685510d8b..2926c30193 100644 --- a/keyboards/dztech/duo_s/config.h +++ b/keyboards/dztech/duo_s/config.h @@ -28,11 +28,6 @@ #define RGBLIGHT_EFFECT_TWINKLE #define RGBLIGHT_DEFAULT_MODE (RGBLIGHT_EFFECT_RAINBOW_MOOD + 6) #define RGBLIGHT_DEFAULT_SPD 15 -#define RGBLED_NUM 16 -#define RGBLIGHT_HUE_STEP 10 -#define RGBLIGHT_SAT_STEP 10 -#define RGBLIGHT_VAL_STEP 10 -#define RGBLIGHT_SLEEP /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ #define LOCKING_SUPPORT_ENABLE diff --git a/keyboards/dztech/duo_s/info.json b/keyboards/dztech/duo_s/info.json index 3d806edf41..b1d5bd45b5 100644 --- a/keyboards/dztech/duo_s/info.json +++ b/keyboards/dztech/duo_s/info.json @@ -8,6 +8,13 @@ "pid": "0x1012", "device_version": "0.0.1" }, + "rgblight": { + "hue_steps": 10, + "saturation_steps": 10, + "brightness_steps": 10, + "led_count": 16, + "sleep": true + }, "ws2812": { "pin": "B15" }, diff --git a/keyboards/dztech/dz60rgb/keymaps/matthewrobo/keymap.c b/keyboards/dztech/dz60rgb/keymaps/matthewrobo/keymap.c index 8d58eed10e..e446178b62 100644 --- a/keyboards/dztech/dz60rgb/keymaps/matthewrobo/keymap.c +++ b/keyboards/dztech/dz60rgb/keymaps/matthewrobo/keymap.c @@ -25,7 +25,6 @@ enum dz60rgb_keycodes { #define _V_V_V_ KC_TRNS #define LT_CAPS LT(_NAV, KC_CAPS) #define LT_DEL LT(_RGB, KC_DEL) -extern bool autoshift_enabled; #define MT_SLSH RSFT_T(KC_SLSH) #define MT_APP RALT_T(KC_APP) #define LM_LALT LM(_FNM, MOD_LALT) @@ -92,12 +91,12 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { }; bool rgb_matrix_indicators_user(void) { - uint8_t this_led = host_keyboard_leds(); + led_t led_state = host_keyboard_led_state(); if (!g_suspend_state && rgb_matrix_config.enable) { switch (get_highest_layer(layer_state)) { case _NAV: - if (this_led & (1 << USB_LED_NUM_LOCK)) { + if (led_state.num_lock) { rgb_matrix_set_color(13, 0xFF, 0x00, 0x00); rgb_matrix_set_color(19, 0xFF, 0xFF, 0x00); } else { @@ -204,17 +203,11 @@ bool rgb_matrix_indicators_user(void) { rgb_matrix_set_color(41, 0xFF, 0x00, 0x40); // ctrl+delete rgb_matrix_set_color(43, 0xFF, 0x00, 0x40); // ctrl+slash - if (this_led & (1 << !autoshift_enabled)) { - rgb_matrix_set_color(0, 0xFF, 0x00, 0x00); // AS_TOGG - } else { - rgb_matrix_set_color(0, 0xFF, 0xFF, 0x00); - } - break; } } - if (this_led & (1 << USB_LED_CAPS_LOCK)) { + if (led_state.caps_lock) { rgb_matrix_set_color(40, 0xFF, 0xFF, 0xFF); } return false; diff --git a/keyboards/dztech/dz60rgb/keymaps/mekanist/keymap.c b/keyboards/dztech/dz60rgb/keymaps/mekanist/keymap.c index 4dca4d2396..52b7643850 100644 --- a/keyboards/dztech/dz60rgb/keymaps/mekanist/keymap.c +++ b/keyboards/dztech/dz60rgb/keymaps/mekanist/keymap.c @@ -58,7 +58,7 @@ void rgb_matrix_layer_helper (uint8_t red, uint8_t green, uint8_t blue) { } bool rgb_matrix_indicators_user(void) { - uint8_t this_led = host_keyboard_leds(); + led_t led_state = host_keyboard_led_state(); if (!g_suspend_state && rgb_matrix_config.enable) { switch (get_highest_layer(layer_state)) { @@ -73,13 +73,13 @@ bool rgb_matrix_indicators_user(void) { } } - if (this_led & (1 << USB_LED_CAPS_LOCK)) { + if (led_state.caps_lock) { rgb_matrix_set_color(40, 0xFF, 0xFF, 0xFF); } switch (get_highest_layer(layer_state)) { case _LAYER3: - if (this_led & (1 << USB_LED_NUM_LOCK)) { + if (led_state.num_lock) { rgb_matrix_set_color(13, 0xFF, 0x00, 0x00); } else { rgb_matrix_set_color(13, 0x00, 0x00, 0x00); @@ -152,22 +152,3 @@ bool rgb_matrix_indicators_user(void) { } return false; } - - - - - -void matrix_init_user(void) -{ - //user initialization -} - -void matrix_scan_user(void) -{ - //user matrix -} - -bool process_record_user(uint16_t keycode, keyrecord_t* record) -{ - return true; -} diff --git a/keyboards/dztech/dz60rgb_ansi/keymaps/kuru/keymap.c b/keyboards/dztech/dz60rgb_ansi/keymaps/kuru/keymap.c index 7f3b24de74..e5f5083ee5 100644 --- a/keyboards/dztech/dz60rgb_ansi/keymaps/kuru/keymap.c +++ b/keyboards/dztech/dz60rgb_ansi/keymaps/kuru/keymap.c @@ -85,7 +85,7 @@ void highlight_layer3(void){ } bool rgb_matrix_indicators_user(void) { - uint8_t this_led = host_keyboard_leds(); + led_t led_state = host_keyboard_led_state(); if (!g_suspend_state) { switch (get_highest_layer(layer_state)) { case 3: @@ -94,7 +94,7 @@ bool rgb_matrix_indicators_user(void) { break; } } - if ( this_led & (1<<USB_LED_CAPS_LOCK)) { + if (led_state.caps_lock) { rgb_matrix_set_color(40, 0xFF, 0xFF, 0xFF); } return false; diff --git a/keyboards/dztech/dz60rgb_ansi/keymaps/muralisc/keymap.c b/keyboards/dztech/dz60rgb_ansi/keymaps/muralisc/keymap.c index af2d9fa3dc..ff829f53fa 100644 --- a/keyboards/dztech/dz60rgb_ansi/keymaps/muralisc/keymap.c +++ b/keyboards/dztech/dz60rgb_ansi/keymaps/muralisc/keymap.c @@ -146,7 +146,7 @@ void highlight_layer3(void) { } bool rgb_matrix_indicators_user(void) { - uint8_t this_led = host_keyboard_leds(); + led_t led_state = host_keyboard_led_state(); if (!g_suspend_state) { switch (get_highest_layer(layer_state)) { case 1: @@ -161,7 +161,7 @@ bool rgb_matrix_indicators_user(void) { break; } } - if ( this_led & (1<<USB_LED_CAPS_LOCK)) { + if (led_state.caps_lock) { rgb_matrix_set_color(40, 0xFF, 0xFF, 0xFF); } return false; diff --git a/keyboards/dztech/dz65rgb/keymaps/catrielmuller/keymap.c b/keyboards/dztech/dz65rgb/keymaps/catrielmuller/keymap.c index d4e1851f68..7b4e9ab728 100644 --- a/keyboards/dztech/dz65rgb/keymaps/catrielmuller/keymap.c +++ b/keyboards/dztech/dz65rgb/keymaps/catrielmuller/keymap.c @@ -166,10 +166,10 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, TO(_INDEX), KC_NO, KC_MPRV, KC_VOLD, KC_MNXT ), [_EMOJI] = LAYOUT_65_ansi( - TO(_MAIN), X(UC_GRINNING_FACE), X(UC_BEAMING_FACE), X(UC_GRINNING_FACE_WITH_SWEAT), X(UC_ROLLING_LAUGHING), X(UC_FACE_TEARS_JOY), X(UC_WINKING_FACE), X(UC_SMILING_FACE_HALO), X(UC_SMILING_FACE_HEARTS), X(UC_SMILING_FACE_HEART_EYES), X(UC_FACE_BLOWING_KISS), X(UC_FACE_SAVORING_FOOD), X(UC_ZANY_FACE), KC_BSPC, KC_HOME, - KC_TAB, X(UC_HUGGING_FACE), X(UC_SHUSHING_FACE), X(UC_THINKING_FACE), X(UC_FACE_RAISED_EYEBROW), X(UC_NEUTRAL_FACE), X(UC_SMIRKING_FACE), X(UC_FACE_ROLLING_EYES), X(UC_PENSIVE_FACE), X(UC_FACE_VOMITING), X(UC_WOOZY_FACE), X(UC_PLEADING_FACE), X(UC_LOUDLY_CRYING_FACE), X(UC_THUMBSUP), KC_END, - KC_APP, X(UC_DISAPPOINTED_FACE), X(UC_FACE_SYMBOLS_MOUTH), X(UC_SMILING_FACE_HORNS), X(UC_SKULL), X(UC_PILE_POO), X(UC_GHOST), X(UC_ALIEN_MONSTER), X(UC_RED_HEART), X(UC_BOMB), X(UC_WAVING_HAND), X(UC_OK_HAND), KC_ENT, KC_PGUP, - KC_LSFT, X(UC_CLAPPING_HANDS), X(UC_EYES), X(UC_MAN_FACEPALMING), X(UC_TURTLE), X(UC_SNAKE), X(UC_SPOUTING_WHALE), X(UC_DRAGON), X(UC_TREX), X(UC_ARGENTINA_A), X(UC_ARGENTINA_R), X(UC_THUMBSDOWN), KC_UP, KC_PGDN, + TO(_MAIN), UM(UC_GRINNING_FACE), UM(UC_BEAMING_FACE), UM(UC_GRINNING_FACE_WITH_SWEAT), UM(UC_ROLLING_LAUGHING), UM(UC_FACE_TEARS_JOY), UM(UC_WINKING_FACE), UM(UC_SMILING_FACE_HALO), UM(UC_SMILING_FACE_HEARTS), UM(UC_SMILING_FACE_HEART_EYES), UM(UC_FACE_BLOWING_KISS), UM(UC_FACE_SAVORING_FOOD), UM(UC_ZANY_FACE), KC_BSPC, KC_HOME, + KC_TAB, UM(UC_HUGGING_FACE), UM(UC_SHUSHING_FACE), UM(UC_THINKING_FACE), UM(UC_FACE_RAISED_EYEBROW), UM(UC_NEUTRAL_FACE), UM(UC_SMIRKING_FACE), UM(UC_FACE_ROLLING_EYES), UM(UC_PENSIVE_FACE), UM(UC_FACE_VOMITING), UM(UC_WOOZY_FACE), UM(UC_PLEADING_FACE), UM(UC_LOUDLY_CRYING_FACE), UM(UC_THUMBSUP), KC_END, + KC_APP, UM(UC_DISAPPOINTED_FACE), UM(UC_FACE_SYMBOLS_MOUTH), UM(UC_SMILING_FACE_HORNS), UM(UC_SKULL), UM(UC_PILE_POO), UM(UC_GHOST), UM(UC_ALIEN_MONSTER), UM(UC_RED_HEART), UM(UC_BOMB), UM(UC_WAVING_HAND), UM(UC_OK_HAND), KC_ENT, KC_PGUP, + KC_LSFT, UM(UC_CLAPPING_HANDS), UM(UC_EYES), UM(UC_MAN_FACEPALMING), UM(UC_TURTLE), UM(UC_SNAKE), UM(UC_SPOUTING_WHALE), UM(UC_DRAGON), UM(UC_TREX), UM(UC_ARGENTINA_A), UM(UC_ARGENTINA_R), UM(UC_THUMBSDOWN), KC_UP, KC_PGDN, KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, QK_LEAD, TO(_INDEX), TO(_MAIN), KC_LEFT, KC_DOWN, KC_RGHT ), [_EXT1] = LAYOUT_65_ansi( diff --git a/keyboards/dztech/dz65rgb/keymaps/matthewrobo/keymap.c b/keyboards/dztech/dz65rgb/keymaps/matthewrobo/keymap.c index d283d0ba1e..7936aaff75 100644 --- a/keyboards/dztech/dz65rgb/keymaps/matthewrobo/keymap.c +++ b/keyboards/dztech/dz65rgb/keymaps/matthewrobo/keymap.c @@ -25,7 +25,6 @@ enum dz65rgb_keycodes { #define TG_NKRO MAGIC_TOGGLE_NKRO #define _V_V_V_ KC_TRNS #define LT_CAPS LT(_NAV, KC_CAPS) -extern bool autoshift_enabled; #define MT_APP RALT_T(KC_APP) #define LM_LALT LM(_FNM, MOD_LALT) @@ -87,12 +86,12 @@ bool rgb_matrix_indicators_user(void) { rgb_matrix_set_color(8, 0xFF, 0xFF, 0xFF); } - uint8_t this_led = host_keyboard_leds(); + led_t led_state = host_keyboard_led_state(); if (!g_suspend_state && rgb_matrix_config.enable) { switch (get_highest_layer(layer_state)) { case _NAV: - if (IS_LED_ON(this_led, USB_LED_NUM_LOCK)) { + if (led_state.num_lock) { rgb_matrix_set_color(17, 0xFF, 0x00, 0x00); rgb_matrix_set_color(26, 0xFF, 0xFF, 0x00); } else { @@ -171,12 +170,6 @@ bool rgb_matrix_indicators_user(void) { rgb_matrix_set_color(24, 0xFF, 0x40, 0x00); // KC_MPRV rgb_matrix_set_color(25, 0xFF, 0x40, 0x00); - if (this_led & (1 << !autoshift_enabled)) { - rgb_matrix_set_color(15, 0xFF, 0x00, 0x00); // AS_TOGG - } else { - rgb_matrix_set_color(15, 0xFF, 0xFF, 0x00); - } - rgb_matrix_set_color(6, 0xFF, 0x80, 0x00); //RGB_MOD rgb_matrix_set_color(48, 0xFF, 0x80, 0x00); rgb_matrix_set_color(29, 0xFF, 0x80, 0x00); //RGB_MOD diff --git a/keyboards/dztech/endless80/config.h b/keyboards/dztech/endless80/config.h index d02f837169..88714aca19 100644 --- a/keyboards/dztech/endless80/config.h +++ b/keyboards/dztech/endless80/config.h @@ -27,7 +27,3 @@ #define RGBLIGHT_EFFECT_TWINKLE #define RGBLIGHT_DEFAULT_MODE (RGBLIGHT_EFFECT_RAINBOW_MOOD + 6) #define RGBLIGHT_DEFAULT_SPD 10 -#define RGBLED_NUM 30 -#define RGBLIGHT_HUE_STEP 10 -#define RGBLIGHT_SAT_STEP 10 -#define RGBLIGHT_VAL_STEP 10 diff --git a/keyboards/dztech/endless80/info.json b/keyboards/dztech/endless80/info.json index 9fb8bc22ed..590b3a02ee 100644 --- a/keyboards/dztech/endless80/info.json +++ b/keyboards/dztech/endless80/info.json @@ -21,6 +21,10 @@ "pin": "F7" }, "rgblight": { + "hue_steps": 10, + "saturation_steps": 10, + "brightness_steps": 10, + "led_count": 30, "max_brightness": 130 }, "processor": "atmega32u4", diff --git a/keyboards/ealdin/quadrant/config.h b/keyboards/ealdin/quadrant/config.h index f5d4e037d9..73073023ab 100644 --- a/keyboards/ealdin/quadrant/config.h +++ b/keyboards/ealdin/quadrant/config.h @@ -17,11 +17,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #pragma once - #define RGBLED_NUM 7 - #define RGBLIGHT_HUE_STEP 8 - #define RGBLIGHT_SAT_STEP 8 - #define RGBLIGHT_VAL_STEP 8 - #define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */ #define RGBLIGHT_EFFECT_BREATHING #define RGBLIGHT_EFFECT_RAINBOW_MOOD #define RGBLIGHT_EFFECT_RAINBOW_SWIRL diff --git a/keyboards/ealdin/quadrant/info.json b/keyboards/ealdin/quadrant/info.json index be9249cca4..e2da03bd50 100644 --- a/keyboards/ealdin/quadrant/info.json +++ b/keyboards/ealdin/quadrant/info.json @@ -18,6 +18,12 @@ {"pin_a": "D5", "pin_b": "F1"} ] }, + "rgblight": { + "saturation_steps": 8, + "brightness_steps": 8, + "led_count": 7, + "sleep": true + }, "ws2812": { "pin": "C7" }, diff --git a/keyboards/eason/aeroboard/config.h b/keyboards/eason/aeroboard/config.h index 5ba690ee95..877ce5ac96 100644 --- a/keyboards/eason/aeroboard/config.h +++ b/keyboards/eason/aeroboard/config.h @@ -13,7 +13,6 @@ #define RGBLIGHT_EFFECT_RGB_TEST #define RGBLIGHT_EFFECT_ALTERNATING #define RGBLIGHT_EFFECT_TWINKLE -#define RGBLED_NUM 20 #define WS2812_SPI SPID2 #define WS2812_SPI_MOSI_PAL_MODE 5 diff --git a/keyboards/eason/aeroboard/info.json b/keyboards/eason/aeroboard/info.json index c7383aa160..68707d82fa 100644 --- a/keyboards/eason/aeroboard/info.json +++ b/keyboards/eason/aeroboard/info.json @@ -2,13 +2,16 @@ "keyboard_name": "AeroBoard", "manufacturer": "Eason", "url": "", - "maintainer": "Eason", + "maintainer": "EasonQian1", "usb": { "vid": "0x8954", "pid": "0x8870", "device_version": "0.0.1", "force_nkro": true }, + "rgblight": { + "led_count": 20 + }, "ws2812": { "pin": "B15", "driver": "spi" @@ -21,12 +24,96 @@ "processor": "STM32F103", "bootloader": "stm32duino", "layouts": { - "LAYOUT": { + "LAYOUT_7u_space": { + "layout": [ + {"matrix": [0, 0], "x": 0, "y": 0}, + + {"matrix": [0, 2], "x": 1.75, "y": 0}, + {"matrix": [0, 1], "x": 2.75, "y": 0}, + {"matrix": [0, 3], "x": 3.75, "y": 0}, + {"matrix": [0, 4], "x": 4.75, "y": 0}, + {"matrix": [0, 5], "x": 5.75, "y": 0}, + {"matrix": [0, 6], "x": 6.75, "y": 0}, + {"matrix": [0, 7], "x": 7.75, "y": 0}, + {"matrix": [0, 8], "x": 8.75, "y": 0}, + {"matrix": [0, 9], "x": 9.75, "y": 0}, + {"matrix": [0, 10], "x": 10.75, "y": 0}, + {"matrix": [0, 11], "x": 11.75, "y": 0}, + {"matrix": [0, 12], "x": 12.75, "y": 0}, + {"matrix": [0, 13], "x": 13.75, "y": 0}, + {"matrix": [0, 14], "x": 14.75, "y": 0, "w": 2}, + {"matrix": [0, 15], "x": 16.75, "y": 0}, + + {"matrix": [1, 0], "x": 0, "y": 1}, + + {"matrix": [1, 2], "x": 1.75, "y": 1, "w": 1.5}, + {"matrix": [1, 1], "x": 3.25, "y": 1}, + {"matrix": [1, 3], "x": 4.25, "y": 1}, + {"matrix": [1, 4], "x": 5.25, "y": 1}, + {"matrix": [1, 5], "x": 6.25, "y": 1}, + {"matrix": [1, 6], "x": 7.25, "y": 1}, + {"matrix": [1, 7], "x": 8.25, "y": 1}, + {"matrix": [1, 8], "x": 9.25, "y": 1}, + {"matrix": [1, 9], "x": 10.25, "y": 1}, + {"matrix": [1, 10], "x": 11.25, "y": 1}, + {"matrix": [1, 11], "x": 12.25, "y": 1}, + {"matrix": [1, 12], "x": 13.25, "y": 1}, + {"matrix": [1, 13], "x": 14.25, "y": 1}, + {"matrix": [1, 14], "x": 15.25, "y": 1, "w": 1.5}, + {"matrix": [1, 15], "x": 16.75, "y": 1}, + + {"matrix": [2, 0], "x": 0, "y": 2}, + + {"matrix": [2, 1], "x": 1.75, "y": 2, "w": 1.75}, + {"matrix": [2, 2], "x": 3.5, "y": 2}, + {"matrix": [2, 3], "x": 4.5, "y": 2}, + {"matrix": [2, 4], "x": 5.5, "y": 2}, + {"matrix": [2, 5], "x": 6.5, "y": 2}, + {"matrix": [2, 6], "x": 7.5, "y": 2}, + {"matrix": [2, 7], "x": 8.5, "y": 2}, + {"matrix": [2, 8], "x": 9.5, "y": 2}, + {"matrix": [2, 9], "x": 10.5, "y": 2}, + {"matrix": [2, 10], "x": 11.5, "y": 2}, + {"matrix": [2, 11], "x": 12.5, "y": 2}, + {"matrix": [2, 12], "x": 13.5, "y": 2}, + {"matrix": [2, 14], "x": 14.5, "y": 2, "w": 2.25}, + {"matrix": [2, 15], "x": 16.75, "y": 2}, + + {"matrix": [3, 0], "x": 0, "y": 3}, + + {"matrix": [3, 1], "x": 1.75, "y": 3, "w": 2.25}, + {"matrix": [3, 3], "x": 4, "y": 3}, + {"matrix": [3, 4], "x": 5, "y": 3}, + {"matrix": [3, 5], "x": 6, "y": 3}, + {"matrix": [3, 6], "x": 7, "y": 3}, + {"matrix": [3, 7], "x": 8, "y": 3}, + {"matrix": [3, 8], "x": 9, "y": 3}, + {"matrix": [3, 9], "x": 10, "y": 3}, + {"matrix": [3, 10], "x": 11, "y": 3}, + {"matrix": [3, 11], "x": 12, "y": 3}, + {"matrix": [3, 12], "x": 13, "y": 3}, + {"matrix": [3, 13], "x": 14, "y": 3, "w": 1.75}, + {"matrix": [3, 14], "x": 15.75, "y": 3}, + {"matrix": [3, 15], "x": 16.75, "y": 3}, + + {"matrix": [4, 0], "x": 0, "y": 4}, + + {"matrix": [4, 1], "x": 1.75, "y": 4, "w": 1.5}, + {"matrix": [4, 3], "x": 4, "y": 4, "w": 1.5}, + {"matrix": [4, 7], "x": 5.5, "y": 4, "w": 7}, + {"matrix": [4, 11], "x": 12.5, "y": 4, "w": 1.5}, + + {"matrix": [4, 13], "x": 14.75, "y": 4}, + {"matrix": [4, 14], "x": 15.75, "y": 4}, + {"matrix": [4, 15], "x": 16.75, "y": 4} + ] + }, + "LAYOUT_split_space": { "layout": [ {"matrix": [0, 0], "x": 0, "y": 0}, - {"matrix": [0, 1], "x": 1.75, "y": 0}, - {"matrix": [0, 2], "x": 2.75, "y": 0}, + {"matrix": [0, 2], "x": 1.75, "y": 0}, + {"matrix": [0, 1], "x": 2.75, "y": 0}, {"matrix": [0, 3], "x": 3.75, "y": 0}, {"matrix": [0, 4], "x": 4.75, "y": 0}, {"matrix": [0, 5], "x": 5.75, "y": 0}, @@ -43,8 +130,8 @@ {"matrix": [1, 0], "x": 0, "y": 1}, - {"matrix": [1, 1], "x": 1.75, "y": 1, "w": 1.5}, - {"matrix": [1, 2], "x": 3.25, "y": 1}, + {"matrix": [1, 2], "x": 1.75, "y": 1, "w": 1.5}, + {"matrix": [1, 1], "x": 3.25, "y": 1}, {"matrix": [1, 3], "x": 4.25, "y": 1}, {"matrix": [1, 4], "x": 5.25, "y": 1}, {"matrix": [1, 5], "x": 6.25, "y": 1}, diff --git a/keyboards/eason/aeroboard/keymaps/default/keymap.c b/keyboards/eason/aeroboard/keymaps/default/keymap.c index 61f2a90364..2e6d012fba 100644 --- a/keyboards/eason/aeroboard/keymaps/default/keymap.c +++ b/keyboards/eason/aeroboard/keymaps/default/keymap.c @@ -5,19 +5,19 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { - [0] = LAYOUT( - KC_ESC, KC_1, KC_GRV, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_DEL, - KC_MINS, KC_Q, KC_TAB, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_PGUP, - KC_PLUS, KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, KC_PGDN, - MO(1) , KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_UP, MO(1), - KC_LGUI, KC_LCTL, KC_LALT, KC_SPC, KC_SPC, KC_SPC, KC_RALT, KC_LEFT, KC_DOWN, KC_RGHT - ), - [1] = LAYOUT( - KC_HOME, KC_F1, _______, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12,KC_DEL, KC_PSCR, - _______, _______, _______, KC_UP, _______, _______, _______, _______, _______, _______, _______, _______, _______,_______,QK_BOOT, KC_PAUS, - _______, _______, KC_LEFT, KC_DOWN, KC_RGHT, _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_INS, - _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_MUTE,_______, KC_VOLU, _______, - _______, _______, _______, _______, _______, _______, _______, KC_MPRV, KC_VOLD, KC_MNXT - ), + [0] = LAYOUT_split_space( + KC_ESC, KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_DEL, + KC_MINS, KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_PGUP, + KC_PLUS, KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, KC_PGDN, + MO(1), KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_UP, MO(1), + KC_LGUI, KC_LCTL, KC_LALT, KC_SPC, KC_SPC, KC_SPC, KC_RALT, KC_LEFT, KC_DOWN, KC_RGHT + ), + [1] = LAYOUT_split_space( + KC_HOME, _______, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_DEL, KC_PSCR, + _______, _______, _______, KC_UP, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, QK_BOOT, KC_PAUS, + _______, _______, KC_LEFT, KC_DOWN, KC_RGHT, _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_INS, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_MUTE, _______, KC_VOLU, _______, + _______, _______, _______, _______, _______, _______, _______, KC_MPRV, KC_VOLD, KC_MNXT + ), }; diff --git a/keyboards/eason/aeroboard/keymaps/via/keymap.c b/keyboards/eason/aeroboard/keymaps/via/keymap.c index 614c3daa02..0c410242ef 100644 --- a/keyboards/eason/aeroboard/keymaps/via/keymap.c +++ b/keyboards/eason/aeroboard/keymaps/via/keymap.c @@ -5,32 +5,33 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { - [0] = LAYOUT( - KC_ESC, KC_1, KC_GRV, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_DEL, - KC_MINS, KC_Q, KC_TAB, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_PGUP, - KC_PLUS, KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, KC_PGDN, - MO(1) , KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_UP, MO(1), - KC_LGUI, KC_LCTL, KC_LALT, KC_SPC, KC_SPC, KC_SPC, KC_RALT, KC_LEFT, KC_DOWN, KC_RGHT - ), - [1] = LAYOUT( - KC_HOME, KC_F1, _______, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12,KC_DEL, KC_PSCR, - _______, _______, _______, KC_UP, _______, _______, _______, _______, _______, _______, _______, _______, _______,_______,QK_BOOT, KC_PAUS, - _______, _______, KC_LEFT, KC_DOWN, KC_RGHT, _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_INS, - _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_MUTE,_______, KC_VOLU, _______, - _______, _______, _______, _______, _______, _______, _______, KC_MPRV, KC_VOLD, KC_MNXT - ), - [2] = LAYOUT( - _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,_______,_______, _______, - _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,_______,_______, _______, - _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, - _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,_______, _______, _______, - _______, _______, _______, _______, _______, _______, _______, _______, _______, _______ - ), - [3] = LAYOUT( - _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,_______,_______, _______, - _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,_______,_______, _______, - _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, - _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,_______, _______, _______, - _______, _______, _______, _______, _______, _______, _______, _______, _______, _______ - ), + [0] = LAYOUT_split_space( + KC_ESC, KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_DEL, + KC_MINS, KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_PGUP, + KC_PLUS, KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, KC_PGDN, + MO(1), KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_UP, MO(1), + KC_LGUI, KC_LCTL, KC_LALT, KC_SPC, KC_SPC, KC_SPC, KC_RALT, KC_LEFT, KC_DOWN, KC_RGHT + ), + [1] = LAYOUT_split_space( + KC_HOME, _______, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_DEL, KC_PSCR, + _______, _______, _______, KC_UP, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, QK_BOOT, KC_PAUS, + _______, _______, KC_LEFT, KC_DOWN, KC_RGHT, _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_INS, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_MUTE, _______, KC_VOLU, _______, + _______, _______, _______, _______, _______, _______, _______, KC_MPRV, KC_VOLD, KC_MNXT + ), + [2] = LAYOUT_split_space( + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______ + ), + [3] = LAYOUT_split_space( + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______ + ), + }; diff --git a/keyboards/eason/aeroboard/rules.mk b/keyboards/eason/aeroboard/rules.mk index 9f38d0d71b..f8a65f43e9 100644 --- a/keyboards/eason/aeroboard/rules.mk +++ b/keyboards/eason/aeroboard/rules.mk @@ -11,5 +11,3 @@ BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality RGBLIGHT_ENABLE = yes # Enable keyboard RGB underglow AUDIO_ENABLE = no # Audio output SLEEP_LED_ENABLE = yes -# Enter lower-power sleep mode when on the ChibiOS idle thread -OPT_DEFS += -DCORTEX_ENABLE_WFI_IDLE=TRUE diff --git a/keyboards/eason/capsule65/config.h b/keyboards/eason/capsule65/config.h index cfe3e84fda..6f3b87c58e 100644 --- a/keyboards/eason/capsule65/config.h +++ b/keyboards/eason/capsule65/config.h @@ -26,7 +26,3 @@ #define RGBLIGHT_EFFECT_RGB_TEST #define RGBLIGHT_EFFECT_ALTERNATING #define RGBLIGHT_EFFECT_TWINKLE -#define RGBLED_NUM 6 -#define RGBLIGHT_HUE_STEP 8 -#define RGBLIGHT_SAT_STEP 8 -#define RGBLIGHT_VAL_STEP 8 diff --git a/keyboards/eason/capsule65/info.json b/keyboards/eason/capsule65/info.json index 6496a6be71..108732af6e 100644 --- a/keyboards/eason/capsule65/info.json +++ b/keyboards/eason/capsule65/info.json @@ -16,6 +16,11 @@ "indicators": { "caps_lock": "F6" }, + "rgblight": { + "saturation_steps": 8, + "brightness_steps": 8, + "led_count": 6 + }, "ws2812": { "pin": "F7" }, diff --git a/keyboards/eason/greatsword80/config.h b/keyboards/eason/greatsword80/config.h deleted file mode 100644 index 9a0ee7ab72..0000000000 --- a/keyboards/eason/greatsword80/config.h +++ /dev/null @@ -1,20 +0,0 @@ -/* Copyright 2023 Eason <xiaoxuxk@yeah.net> - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see <http://www.gnu.org/licenses/>. - */ - -#pragma once - -#define LED_CAPS_LOCK_PIN F0 -#define LED_PIN_ON_STATE 0 diff --git a/keyboards/eason/greatsword80/info.json b/keyboards/eason/greatsword80/info.json index d198d65f2a..74c469f7ce 100644 --- a/keyboards/eason/greatsword80/info.json +++ b/keyboards/eason/greatsword80/info.json @@ -8,6 +8,10 @@ "pid": "0x998F", "device_version": "0.0.1" }, + "indicators": { + "caps_lock": "F0", + "on_state": 0 + }, "matrix_pins": { "cols": ["D6", "D7", "B4", "B5", "B6", "C6", "C7", "E2", "F7", "F6", "F5", "F4", "B0", "B1", "B2", "B3"], "rows": ["D0", "D1", "D2", "D3", "D5", "D4"] diff --git a/keyboards/ebastler/isometria_75/rev1/config.h b/keyboards/ebastler/isometria_75/rev1/config.h index 68f54a8014..29a2ac527d 100644 --- a/keyboards/ebastler/isometria_75/rev1/config.h +++ b/keyboards/ebastler/isometria_75/rev1/config.h @@ -24,18 +24,14 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #define BACKLIGHT_PWM_OUTPUT_FREQUENCY 1000 // Increases backlight PWM freq if compiled with an unmerged PR. Does no harm without it. /* Underglow */ -#define RGBLED_NUM 17 #define WS2812_PWM_DRIVER PWMD2 #define WS2812_PWM_CHANNEL 2 #define WS2812_PWM_PAL_MODE 2 #define WS2812_DMA_STREAM STM32_DMA1_STREAM2 #define WS2812_DMA_CHANNEL 2 -#define RGBLIGHT_SLEEP #define RGBLIGHT_EFFECT_BREATHING #define RGBLIGHT_EFFECT_RAINBOW_MOOD #define RGBLIGHT_EFFECT_RAINBOW_SWIRL -#define TAP_CODE_DELAY 10 - /* ADC - will be used for battery monitoring once BT support is added */ /* #define ADC_PIN B0 */ diff --git a/keyboards/ebastler/isometria_75/rev1/info.json b/keyboards/ebastler/isometria_75/rev1/info.json index 8151451a32..4c3d6a626e 100644 --- a/keyboards/ebastler/isometria_75/rev1/info.json +++ b/keyboards/ebastler/isometria_75/rev1/info.json @@ -8,6 +8,10 @@ "pid": "0x1337", "device_version": "0.0.1" }, + "rgblight": { + "led_count": 17, + "sleep": true + }, "ws2812": { "pin": "B3", "driver": "pwm" @@ -22,6 +26,9 @@ {"pin_a": "C15", "pin_b": "C14", "resolution": 2} ] }, + "qmk": { + "tap_keycode_delay": 10 + }, "backlight": { "pin": "A9", "levels": 5, diff --git a/keyboards/ebastler/isometria_75/rev1/rules.mk b/keyboards/ebastler/isometria_75/rev1/rules.mk index 2fd78a13f1..76b31f0a0a 100644 --- a/keyboards/ebastler/isometria_75/rev1/rules.mk +++ b/keyboards/ebastler/isometria_75/rev1/rules.mk @@ -12,5 +12,3 @@ RGBLIGHT_ENABLE = yes # Enable keyboard RGB underglow AUDIO_ENABLE = no # Audio output ENCODER_ENABLE = yes -# Enter lower-power sleep mode when on the ChibiOS idle thread -OPT_DEFS += -DCORTEX_ENABLE_WFI_IDLE=TRUE diff --git a/keyboards/edi/hardlight/mk1/config.h b/keyboards/edi/hardlight/mk1/config.h index 6677c4587e..44515c0913 100644 --- a/keyboards/edi/hardlight/mk1/config.h +++ b/keyboards/edi/hardlight/mk1/config.h @@ -25,7 +25,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. /* * Enable RGB Underlighting */ -#define RGBLED_NUM 15 #define RGBLIGHT_EFFECT_BREATHING #define RGBLIGHT_EFFECT_RAINBOW_MOOD #define RGBLIGHT_EFFECT_RAINBOW_SWIRL diff --git a/keyboards/edi/hardlight/mk1/info.json b/keyboards/edi/hardlight/mk1/info.json index d7275dfa70..7e8d1a755d 100644 --- a/keyboards/edi/hardlight/mk1/info.json +++ b/keyboards/edi/hardlight/mk1/info.json @@ -11,6 +11,9 @@ "rows": ["B0", "B1", "B2", "B3", "D4", "D6", "D7", "B4"] }, "diode_direction": "COL2ROW", + "rgblight": { + "led_count": 15 + }, "ws2812": { "pin": "C7" }, diff --git a/keyboards/edi/hardlight/mk2/config.h b/keyboards/edi/hardlight/mk2/config.h index b9b6b86c98..54e18096ff 100644 --- a/keyboards/edi/hardlight/mk2/config.h +++ b/keyboards/edi/hardlight/mk2/config.h @@ -23,7 +23,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #define LOCKING_RESYNC_ENABLE /* RGB Underglow */ -#define RGBLED_NUM 32 #define RGBLIGHT_EFFECT_BREATHING #define RGBLIGHT_EFFECT_RAINBOW_MOOD #define RGBLIGHT_EFFECT_RAINBOW_SWIRL diff --git a/keyboards/edi/hardlight/mk2/info.json b/keyboards/edi/hardlight/mk2/info.json index 63ca3aa15d..64be97d95b 100644 --- a/keyboards/edi/hardlight/mk2/info.json +++ b/keyboards/edi/hardlight/mk2/info.json @@ -6,6 +6,9 @@ "pid": "0x2408", "device_version": "0.0.7" }, + "rgblight": { + "led_count": 32 + }, "ws2812": { "pin": "A10", "driver": "pwm" diff --git a/keyboards/edi/hardlight/mk2/rules.mk b/keyboards/edi/hardlight/mk2/rules.mk index 69c4b26a9e..b7b67ba5b2 100644 --- a/keyboards/edi/hardlight/mk2/rules.mk +++ b/keyboards/edi/hardlight/mk2/rules.mk @@ -16,5 +16,3 @@ AUDIO_ENABLE = no # Audio output VELOCIKEY_ENABLE = yes KEY_LOCK_ENABLE = yes -# Enter lower-power sleep mode when on the ChibiOS idle thread -OPT_DEFS += -DCORTEX_ENABLE_WFI_IDLE=TRUE diff --git a/keyboards/edi/standaside/config.h b/keyboards/edi/standaside/config.h index e59dbc15e6..23ca0b1886 100644 --- a/keyboards/edi/standaside/config.h +++ b/keyboards/edi/standaside/config.h @@ -10,7 +10,6 @@ /* * Enable RGB Underlighting */ -#define RGBLED_NUM 12 #define RGBLIGHT_EFFECT_BREATHING #define RGBLIGHT_EFFECT_RAINBOW_MOOD #define RGBLIGHT_EFFECT_RAINBOW_SWIRL diff --git a/keyboards/edi/standaside/info.json b/keyboards/edi/standaside/info.json index 0c8bb289b0..07e58f1e30 100644 --- a/keyboards/edi/standaside/info.json +++ b/keyboards/edi/standaside/info.json @@ -13,6 +13,9 @@ "rows": ["D1", "F4", "F6", "F7", "B1", "B3", "B2", "B6"] }, "diode_direction": "COL2ROW", + "rgblight": { + "led_count": 12 + }, "ws2812": { "pin": "C7" }, diff --git a/keyboards/edinburgh41/config.h b/keyboards/edinburgh41/config.h index f37d43dd2f..1958d0a932 100644 --- a/keyboards/edinburgh41/config.h +++ b/keyboards/edinburgh41/config.h @@ -3,10 +3,6 @@ #pragma once -// Underglow LED settings - -#define RGBLED_NUM 10 - // Thumbstick settings #define ANALOG_JOYSTICK_X_AXIS_PIN B5 #define ANALOG_JOYSTICK_Y_AXIS_PIN B6 diff --git a/keyboards/edinburgh41/info.json b/keyboards/edinburgh41/info.json index 14e4950c4a..745710f92f 100644 --- a/keyboards/edinburgh41/info.json +++ b/keyboards/edinburgh41/info.json @@ -10,6 +10,9 @@ "pid": "0x0000", "vid": "0xFEED" }, + "rgblight": { + "led_count": 10 + }, "ws2812": { "pin": "D0" }, diff --git a/keyboards/eek/config.h b/keyboards/eek/config.h index 37beac094b..c4a2c91e69 100644 --- a/keyboards/eek/config.h +++ b/keyboards/eek/config.h @@ -17,11 +17,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #pragma once - #define RGBLED_NUM 36 - #define RGBLIGHT_HUE_STEP 4 - #define RGBLIGHT_SAT_STEP 8 - #define RGBLIGHT_VAL_STEP 8 - #define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */ #define RGBLIGHT_EFFECT_BREATHING #define RGBLIGHT_EFFECT_RAINBOW_MOOD #define RGBLIGHT_EFFECT_RAINBOW_SWIRL diff --git a/keyboards/eek/info.json b/keyboards/eek/info.json index dde20e49dc..0a293c514d 100644 --- a/keyboards/eek/info.json +++ b/keyboards/eek/info.json @@ -20,7 +20,12 @@ "pin": "D3" }, "rgblight": { - "max_brightness": 200 + "hue_steps": 4, + "saturation_steps": 8, + "brightness_steps": 8, + "led_count": 36, + "max_brightness": 200, + "sleep": true }, "processor": "atmega32u4", "bootloader": "qmk-dfu", diff --git a/keyboards/ein_60/config.h b/keyboards/ein_60/config.h index e3df68481d..45ce00a2d4 100644 --- a/keyboards/ein_60/config.h +++ b/keyboards/ein_60/config.h @@ -29,11 +29,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. # define AUDIO_DAC_SAMPLE_MAX 4095U #endif -# define RGBLED_NUM 38 -# define RGBLIGHT_HUE_STEP 4 -# define RGBLIGHT_SAT_STEP 8 -# define RGBLIGHT_VAL_STEP 8 -# define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */ # define RGBLIGHT_EFFECT_BREATHING # define RGBLIGHT_EFFECT_RAINBOW_MOOD # define RGBLIGHT_EFFECT_RAINBOW_SWIRL diff --git a/keyboards/ein_60/info.json b/keyboards/ein_60/info.json index 9af00830e0..a316542605 100644 --- a/keyboards/ein_60/info.json +++ b/keyboards/ein_60/info.json @@ -12,7 +12,12 @@ "driver": "WS2812" }, "rgblight": { - "max_brightness": 200 + "hue_steps": 4, + "saturation_steps": 8, + "brightness_steps": 8, + "led_count": 38, + "max_brightness": 200, + "sleep": true }, "matrix_pins": { "cols": ["A3", "A2", "A1", "A0", "F6", "F5", "F0", "E0", "E1", "C0", "C1", "C2", "C3"], diff --git a/keyboards/elephant42/config.h b/keyboards/elephant42/config.h index dc1f568fc4..e08a3bc4e4 100644 --- a/keyboards/elephant42/config.h +++ b/keyboards/elephant42/config.h @@ -17,11 +17,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #pragma once -# define RGBLED_SPLIT { 27, 27 } -# define RGBLED_NUM 54 // backlight x42 + underglow x12 -# define RGBLIGHT_HUE_STEP 8 -# define RGBLIGHT_SAT_STEP 8 -# define RGBLIGHT_VAL_STEP 8 # define RGBLIGHT_EFFECT_BREATHING # define RGBLIGHT_EFFECT_RAINBOW_MOOD # define RGBLIGHT_EFFECT_RAINBOW_SWIRL @@ -35,13 +30,9 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #ifdef RGB_MATRIX_ENABLE # define SPLIT_TRANSPORT_MIRROR -# define RGB_MATRIX_LED_COUNT RGBLED_NUM -# define RGB_MATRIX_SPLIT RGBLED_SPLIT +# define RGB_MATRIX_LED_COUNT 54 +# define RGB_MATRIX_SPLIT { 27, 27 } # define RGB_MATRIX_MAXIMUM_BRIGHTNESS 170 -# define RGB_MATRIX_HUE_STEP RGBLIGHT_HUE_STEP -# define RGB_MATRIX_SAT_STEP RGBLIGHT_SAT_STEP -# define RGB_MATRIX_VAL_STEP RGBLIGHT_VAL_STEP -# define RGB_MATRIX_SPD_STEP 8 #endif #ifndef OLED_FONT_H diff --git a/keyboards/elephant42/info.json b/keyboards/elephant42/info.json index 8c44408055..005735556b 100644 --- a/keyboards/elephant42/info.json +++ b/keyboards/elephant42/info.json @@ -9,10 +9,17 @@ "device_version": "0.0.1" }, "rgb_matrix": { - "driver": "WS2812" + "driver": "WS2812", + "sat_steps": 8, + "val_steps": 8, + "speed_steps": 8 }, "rgblight": { - "max_brightness": 170 + "saturation_steps": 8, + "brightness_steps": 8, + "led_count": 54, + "max_brightness": 170, + "split_count": [27, 27] }, "matrix_pins": { "cols": ["F4", "F5", "F6", "F7", "B1", "B3"], diff --git a/keyboards/emery65/rules.mk b/keyboards/emery65/rules.mk index 7000bb6571..7c0709f41e 100644 --- a/keyboards/emery65/rules.mk +++ b/keyboards/emery65/rules.mk @@ -1,11 +1,6 @@ # Wildcard to allow APM32 MCU DFU_SUFFIX_ARGS = -v FFFF -p FFFF -# Do not put the microcontroller into power saving mode -# when we get USB suspend event. We want it to keep updating -# backlight effects. -OPT_DEFS += -DCORTEX_ENABLE_WFI_IDLE=TRUE - # Build Options # change yes to no to disable # diff --git a/keyboards/ep/comsn/mollydooker/config.h b/keyboards/ep/comsn/mollydooker/config.h index bf53058d52..27fdb99158 100644 --- a/keyboards/ep/comsn/mollydooker/config.h +++ b/keyboards/ep/comsn/mollydooker/config.h @@ -32,10 +32,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #define RGBLIGHT_EFFECT_RGB_TEST #define RGBLIGHT_EFFECT_ALTERNATING #define RGBLIGHT_EFFECT_TWINKLE -#define RGBLED_NUM 84 -#define RGBLIGHT_HUE_STEP 10 -#define RGBLIGHT_SAT_STEP 17 -#define RGBLIGHT_VAL_STEP 17 /* * Feature disable options diff --git a/keyboards/ep/comsn/mollydooker/info.json b/keyboards/ep/comsn/mollydooker/info.json index 6c8825c915..310aa7dbe1 100644 --- a/keyboards/ep/comsn/mollydooker/info.json +++ b/keyboards/ep/comsn/mollydooker/info.json @@ -16,6 +16,8 @@ "pin": "B0" }, "rgblight": { + "hue_steps": 10, + "led_count": 84, "max_brightness": 35 }, "processor": "atmega32u4", diff --git a/keyboards/ergodox_ez/config.h b/keyboards/ergodox_ez/config.h index 3adcd0198b..03a6039e38 100644 --- a/keyboards/ergodox_ez/config.h +++ b/keyboards/ergodox_ez/config.h @@ -44,10 +44,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #define MOUSEKEY_WHEEL_MAX_SPEED MOUSEKEY_MAX_SPEED #define MOUSEKEY_WHEEL_TIME_TO_MAX MOUSEKEY_TIME_TO_MAX -#define TAPPING_TOGGLE 1 - -#define TAPPING_TERM 200 - /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ #define LOCKING_SUPPORT_ENABLE /* Locking resynchronize hack */ @@ -78,9 +74,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #define RGBLIGHT_EFFECT_RGB_TEST #define RGBLIGHT_EFFECT_ALTERNATING #define RGBLIGHT_EFFECT_TWINKLE -#define RGBLIGHT_HUE_STEP 12 -#define RGBLIGHT_SAT_STEP 255 -#define RGBLIGHT_VAL_STEP 12 // Pick one of the modes // Defaults to 15 mirror, for legacy behavior @@ -94,8 +87,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #define RGBW -#define RGBLIGHT_SLEEP - /* * The debounce filtering reports a key/switch change directly, * without any extra delay. After that the debounce logic will filter diff --git a/keyboards/ergodox_ez/ergodox_ez.h b/keyboards/ergodox_ez/ergodox_ez.h index 0c23a12969..befc114617 100644 --- a/keyboards/ergodox_ez/ergodox_ez.h +++ b/keyboards/ergodox_ez/ergodox_ez.h @@ -139,25 +139,3 @@ typedef union { } keyboard_config_t; extern keyboard_config_t keyboard_config; - -/* ---- LEFT HAND ---- ---- RIGHT HAND ---- */ -#define LED_LAYOUT_ergodox_pretty( \ - L01,L02,L03,L04,L05, R01,R02,R03,R04,R05, \ - L11,L12,L13,L14,L15, R11,R12,R13,R14,R15, \ - L21,L22,L23,L24,L25, R21,R22,R23,R24,R25, \ - L31,L32,L33,L34,L35, R31,R32,R33,R34,R35, \ - L41,L42,L43,L44, R42,R43,R44,R45 ) \ - \ - /* matrix positions */ \ - { R01, R02, R03, R04, R05, \ - R11, R12, R13, R14, R15, \ - R21, R22, R23, R24, R25, \ - R31, R32, R33, R34, R35, \ - R42, R43, R44, R45, \ - \ - L05, L04, L03, L02, L01, \ - L15, L14, L13, L12, L11, \ - L25, L24, L23, L22, L21, \ - L35, L34, L33, L32, L31, \ - L44, L43, L42, L41 \ - } diff --git a/keyboards/ergodox_ez/info.json b/keyboards/ergodox_ez/info.json index 5727d11184..0c739abf1e 100644 --- a/keyboards/ergodox_ez/info.json +++ b/keyboards/ergodox_ez/info.json @@ -6,6 +6,11 @@ "vid": "0x3297", "device_version": "0.0.1" }, + "rgblight": { + "hue_steps": 12, + "brightness_steps": 12, + "sleep": true + }, "ws2812": { "pin": "D7" }, @@ -15,6 +20,9 @@ "processor": "atmega32u4", "bootloader": "halfkay", "debounce": 30, + "tapping": { + "toggle": 1 + }, "community_layouts": ["ergodox"], "layouts": { "LAYOUT_ergodox": { diff --git a/keyboards/ergodox_ez/keymaps/bepo_tm_style/keymap.c b/keyboards/ergodox_ez/keymaps/bepo_tm_style/keymap.c index 45a101ec81..99d10e9a12 100755 --- a/keyboards/ergodox_ez/keymaps/bepo_tm_style/keymap.c +++ b/keyboards/ergodox_ez/keymaps/bepo_tm_style/keymap.c @@ -253,12 +253,7 @@ void matrix_scan_user(void) { }; // The state of the LEDs requested by the system, as a bitmask. -static uint8_t sys_led_state = 0; - -// Use these masks to read the system LEDs state. -static const uint8_t sys_led_mask_num_lock = 1 << USB_LED_NUM_LOCK; -static const uint8_t sys_led_mask_caps_lock = 1 << USB_LED_CAPS_LOCK; -static const uint8_t sys_led_mask_scroll_lock = 1 << USB_LED_SCROLL_LOCK; +static led_t sys_led_state = {0}; // Value to use to switch LEDs on. The default value of 255 is far too bright. static const uint8_t max_led_value = 20; @@ -294,25 +289,26 @@ void led_3_off(void) { } // Called when the computer wants to change the state of the keyboard LEDs. -void led_set_user(uint8_t usb_led) { - sys_led_state = usb_led; +bool led_update_user(led_t led_state) { + sys_led_state = led_state; if (LAYER_ON(SYSLEDS)) { - if (sys_led_state & sys_led_mask_caps_lock) { + if (sys_led_state.caps_lock) { led_1_on(); } else { led_1_off(); } - if (sys_led_state & sys_led_mask_num_lock) { + if (sys_led_state.num_lock) { led_2_on(); } else { led_2_off(); } - if (sys_led_state & sys_led_mask_scroll_lock) { + if (sys_led_state.scroll_lock) { led_3_on(); } else { led_3_off(); } } + return false; } layer_state_t layer_state_set_user(layer_state_t state) { @@ -327,7 +323,7 @@ layer_state_t layer_state_set_user(layer_state_t state) { } if (LAYER_ON(SYSLEDS)) { - led_set_user(sys_led_state); + led_update_user(sys_led_state); return state; } diff --git a/keyboards/ergodox_ez/keymaps/dvorak_42_key/keymap.c b/keyboards/ergodox_ez/keymaps/dvorak_42_key/keymap.c index 34284e146d..f8fce23ce5 100644 --- a/keyboards/ergodox_ez/keymaps/dvorak_42_key/keymap.c +++ b/keyboards/ergodox_ez/keymaps/dvorak_42_key/keymap.c @@ -296,12 +296,13 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { -void led_set_user(uint8_t usb_led) { - if (usb_led & (1<<USB_LED_CAPS_LOCK)) { +bool led_update_user(led_t led_state) { + if (led_state.caps_lock) { ergodox_right_led_1_on(); } else { ergodox_right_led_1_off(); } + return false; } diff --git a/keyboards/ergodox_ez/keymaps/smurmann/keymap.c b/keyboards/ergodox_ez/keymaps/smurmann/keymap.c index 0d60e46bfc..65a7a08ec7 100644 --- a/keyboards/ergodox_ez/keymaps/smurmann/keymap.c +++ b/keyboards/ergodox_ez/keymaps/smurmann/keymap.c @@ -194,11 +194,12 @@ void matrix_scan_user(void) { } }; -void led_set_user(uint8_t usb_led){ - if (usb_led & (1 << USB_LED_CAPS_LOCK)) +bool led_update_user(led_t led_state){ + if (led_state.caps_lock) { capsOn = true; }else { capsOn = false; } + return false; } diff --git a/keyboards/ergodox_stm32/rules.mk b/keyboards/ergodox_stm32/rules.mk index e730df82aa..5b86324f9a 100644 --- a/keyboards/ergodox_stm32/rules.mk +++ b/keyboards/ergodox_stm32/rules.mk @@ -15,8 +15,5 @@ NKRO_ENABLE = yes # Enable N-Key Rollover CUSTOM_MATRIX = yes # Custom matrix file UNICODE_ENABLE = yes # Unicode -# Enter lower-power sleep mode when on the ChibiOS idle thread -OPT_DEFS += -DCORTEX_ENABLE_WFI_IDLE=TRUE - SRC += matrix.c QUANTUM_LIB_SRC += i2c_master.c diff --git a/keyboards/ergoslab/rev1/config.h b/keyboards/ergoslab/rev1/config.h deleted file mode 100644 index 414de0ed15..0000000000 --- a/keyboards/ergoslab/rev1/config.h +++ /dev/null @@ -1,40 +0,0 @@ -/* -Copyright 2019 Tom Saleeba <ergoslab@techotom.com> - -This program is free software: you can redistribute it and/or modify -it under the terms of the GNU General Public License as published by -the Free Software Foundation, either version 2 of the License, or -(at your option) any later version. - -This program is distributed in the hope that it will be useful, -but WITHOUT ANY WARRANTY; without even the implied warranty of -MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -GNU General Public License for more details. - -You should have received a copy of the GNU General Public License -along with this program. If not, see <http://www.gnu.org/licenses/>. -*/ - -#pragma once - -#define RGBLED_NUM 2 // Number of LEDs -// FIXME this following line should enable our layer status LEDs to work on both -// sides without need to wire them into a chain. It doesn't though. Uncommenting -// means the slave side of the keyboard stops working (and the LEDs don't work). -// #define RGBLED_SPLIT {1,1} - -/* - * Feature disable options - * These options are also useful to firmware size reduction. - */ - -/* disable debug print */ -// #define NO_DEBUG - -/* disable print */ -// #define NO_PRINT - -/* disable action features */ -//#define NO_ACTION_LAYER -//#define NO_ACTION_TAPPING -//#define NO_ACTION_ONESHOT diff --git a/keyboards/ergoslab/rev1/info.json b/keyboards/ergoslab/rev1/info.json index d786799810..e92dd4dccc 100644 --- a/keyboards/ergoslab/rev1/info.json +++ b/keyboards/ergoslab/rev1/info.json @@ -16,6 +16,9 @@ "split": { "soft_serial_pin": "D2" }, + "rgblight": { + "led_count": 2 + }, "ws2812": { "pin": "D3" }, diff --git a/keyboards/ergotravel/rev1/config.h b/keyboards/ergotravel/rev1/config.h index 326a8f8ffe..790a2696fb 100644 --- a/keyboards/ergotravel/rev1/config.h +++ b/keyboards/ergotravel/rev1/config.h @@ -22,8 +22,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. /* Locking resynchronize hack */ #define LOCKING_RESYNC_ENABLE -#define RGBLED_NUM 12 // Number of LEDs - /* * Feature disable options * These options are also useful to firmware size reduction. diff --git a/keyboards/ergotravel/rev1/info.json b/keyboards/ergotravel/rev1/info.json index 01fd3265e9..77aecec0ed 100644 --- a/keyboards/ergotravel/rev1/info.json +++ b/keyboards/ergotravel/rev1/info.json @@ -16,6 +16,9 @@ "split": { "soft_serial_pin": "D0" }, + "rgblight": { + "led_count": 12 + }, "ws2812": { "pin": "D3" }, diff --git a/keyboards/esca/getawayvan/config.h b/keyboards/esca/getawayvan/config.h index 01118712d2..4b6f46018e 100644 --- a/keyboards/esca/getawayvan/config.h +++ b/keyboards/esca/getawayvan/config.h @@ -29,10 +29,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #define RGBLIGHT_EFFECT_RGB_TEST #define RGBLIGHT_EFFECT_ALTERNATING #define RGBLIGHT_EFFECT_TWINKLE -#define RGBLED_NUM 51 -#define RGBLIGHT_HUE_STEP 20 -#define RGBLIGHT_SAT_STEP 17 -#define RGBLIGHT_VAL_STEP 17 /* * Feature disable options diff --git a/keyboards/esca/getawayvan/info.json b/keyboards/esca/getawayvan/info.json index ba31f9c260..717bf9c7fc 100644 --- a/keyboards/esca/getawayvan/info.json +++ b/keyboards/esca/getawayvan/info.json @@ -17,6 +17,8 @@ "pin": "B15" }, "rgblight": { + "hue_steps": 20, + "led_count": 51, "max_brightness": 128 }, "processor": "STM32F072", diff --git a/keyboards/esca/getawayvan_f042/config.h b/keyboards/esca/getawayvan_f042/config.h index 01118712d2..4b6f46018e 100644 --- a/keyboards/esca/getawayvan_f042/config.h +++ b/keyboards/esca/getawayvan_f042/config.h @@ -29,10 +29,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #define RGBLIGHT_EFFECT_RGB_TEST #define RGBLIGHT_EFFECT_ALTERNATING #define RGBLIGHT_EFFECT_TWINKLE -#define RGBLED_NUM 51 -#define RGBLIGHT_HUE_STEP 20 -#define RGBLIGHT_SAT_STEP 17 -#define RGBLIGHT_VAL_STEP 17 /* * Feature disable options diff --git a/keyboards/esca/getawayvan_f042/info.json b/keyboards/esca/getawayvan_f042/info.json index e39d2b4c22..757308c3c8 100644 --- a/keyboards/esca/getawayvan_f042/info.json +++ b/keyboards/esca/getawayvan_f042/info.json @@ -17,6 +17,8 @@ "pin": "B15" }, "rgblight": { + "hue_steps": 20, + "led_count": 51, "max_brightness": 128 }, "processor": "STM32F042", diff --git a/keyboards/eternal_keypad/config.h b/keyboards/eternal_keypad/config.h index 6eaf9220c7..2dcb4ed665 100644 --- a/keyboards/eternal_keypad/config.h +++ b/keyboards/eternal_keypad/config.h @@ -17,8 +17,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #pragma once -#define RGBLED_NUM 8 -#define RGBLIGHT_SLEEP #define RGBLIGHT_EFFECT_BREATHING #define RGBLIGHT_EFFECT_RAINBOW_MOOD #define RGBLIGHT_EFFECT_RAINBOW_SWIRL diff --git a/keyboards/eternal_keypad/info.json b/keyboards/eternal_keypad/info.json index f10b4ab8a4..b700d04c3f 100644 --- a/keyboards/eternal_keypad/info.json +++ b/keyboards/eternal_keypad/info.json @@ -16,6 +16,10 @@ "bootmagic": { "matrix": [0, 1] }, + "rgblight": { + "led_count": 8, + "sleep": true + }, "ws2812": { "pin": "D3" }, diff --git a/keyboards/evolv/config.h b/keyboards/evolv/config.h index ee7e079772..b25af1111a 100644 --- a/keyboards/evolv/config.h +++ b/keyboards/evolv/config.h @@ -22,8 +22,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. /* Locking resynchronize hack */ #define LOCKING_RESYNC_ENABLE -#define RGBLED_NUM 16 -#define RGBLIGHT_SLEEP #define RGBLIGHT_EFFECT_BREATHING #define RGBLIGHT_EFFECT_RAINBOW_MOOD #define RGBLIGHT_EFFECT_RAINBOW_SWIRL @@ -35,8 +33,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #define RGBLIGHT_EFFECT_ALTERNATING #define RGBLIGHT_EFFECT_TWINKLE -#define TAPPING_TERM 200 - /* * Feature disable options * These options are also useful to firmware size reduction. diff --git a/keyboards/evolv/info.json b/keyboards/evolv/info.json index d4b5162126..f95a5bc1d1 100644 --- a/keyboards/evolv/info.json +++ b/keyboards/evolv/info.json @@ -22,7 +22,9 @@ "pin": "B15" }, "rgblight": { - "max_brightness": 200 + "led_count": 16, + "max_brightness": 200, + "sleep": true }, "processor": "STM32F072", "bootloader": "stm32-dfu", diff --git a/keyboards/evolv/rules.mk b/keyboards/evolv/rules.mk index e6378f4a59..87802fbd6f 100644 --- a/keyboards/evolv/rules.mk +++ b/keyboards/evolv/rules.mk @@ -12,5 +12,3 @@ RGBLIGHT_ENABLE = yes # Enable keyboard RGB underglow AUDIO_ENABLE = no # Audio output ENCODER_ENABLE = yes -# Enter lower-power sleep mode when on the ChibiOS idle thread -OPT_DEFS += -DCORTEX_ENABLE_WFI_IDLE=TRUE diff --git a/keyboards/evyd13/atom47/rev2/config.h b/keyboards/evyd13/atom47/rev2/config.h index 352b89dad9..e14ecadbf0 100644 --- a/keyboards/evyd13/atom47/rev2/config.h +++ b/keyboards/evyd13/atom47/rev2/config.h @@ -21,5 +21,3 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #define LOCKING_SUPPORT_ENABLE /* Locking resynchronize hack */ #define LOCKING_RESYNC_ENABLE - -#define RGBLED_NUM 1 // Number of LEDs in your strip diff --git a/keyboards/evyd13/atom47/rev2/info.json b/keyboards/evyd13/atom47/rev2/info.json index b1642612ea..8c5720d0c4 100644 --- a/keyboards/evyd13/atom47/rev2/info.json +++ b/keyboards/evyd13/atom47/rev2/info.json @@ -18,6 +18,9 @@ "levels": 4, "breathing": true }, + "rgblight": { + "led_count": 1 + }, "ws2812": { "pin": "D0" }, diff --git a/keyboards/evyd13/atom47/rev3/config.h b/keyboards/evyd13/atom47/rev3/config.h index 5f37dc519b..72c1b9dc46 100644 --- a/keyboards/evyd13/atom47/rev3/config.h +++ b/keyboards/evyd13/atom47/rev3/config.h @@ -17,7 +17,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #pragma once -#define RGBLED_NUM 6 // Number of LEDs in your strip #define RGBLIGHT_EFFECT_BREATHING #define RGBLIGHT_EFFECT_RAINBOW_MOOD #define RGBLIGHT_EFFECT_RAINBOW_SWIRL diff --git a/keyboards/evyd13/atom47/rev3/info.json b/keyboards/evyd13/atom47/rev3/info.json index dc9b13961f..7cf50a0a94 100644 --- a/keyboards/evyd13/atom47/rev3/info.json +++ b/keyboards/evyd13/atom47/rev3/info.json @@ -18,6 +18,9 @@ "levels": 5, "breathing": true }, + "rgblight": { + "led_count": 6 + }, "ws2812": { "pin": "F5" }, diff --git a/keyboards/evyd13/eon65/config.h b/keyboards/evyd13/eon65/config.h index abfa0fe63d..d60691c6ab 100644 --- a/keyboards/evyd13/eon65/config.h +++ b/keyboards/evyd13/eon65/config.h @@ -16,7 +16,6 @@ #pragma once - #define RGBLED_NUM 10 #define RGBLIGHT_EFFECT_BREATHING #define RGBLIGHT_EFFECT_RAINBOW_MOOD #define RGBLIGHT_EFFECT_RAINBOW_SWIRL diff --git a/keyboards/evyd13/eon65/info.json b/keyboards/evyd13/eon65/info.json index a58c3a5233..be993ea283 100644 --- a/keyboards/evyd13/eon65/info.json +++ b/keyboards/evyd13/eon65/info.json @@ -13,6 +13,9 @@ "rows": ["D3", "D5", "B1", "B2", "B3"] }, "diode_direction": "COL2ROW", + "rgblight": { + "led_count": 10 + }, "ws2812": { "pin": "E6" }, diff --git a/keyboards/evyd13/eon87/config.h b/keyboards/evyd13/eon87/config.h index 04247c7e73..d60691c6ab 100644 --- a/keyboards/evyd13/eon87/config.h +++ b/keyboards/evyd13/eon87/config.h @@ -16,7 +16,6 @@ #pragma once - #define RGBLED_NUM 12 #define RGBLIGHT_EFFECT_BREATHING #define RGBLIGHT_EFFECT_RAINBOW_MOOD #define RGBLIGHT_EFFECT_RAINBOW_SWIRL diff --git a/keyboards/evyd13/eon87/info.json b/keyboards/evyd13/eon87/info.json index fc134b502f..9698650bac 100644 --- a/keyboards/evyd13/eon87/info.json +++ b/keyboards/evyd13/eon87/info.json @@ -13,6 +13,9 @@ "rows": ["B1", "B2", "B3", "D4", "D1", "D5"] }, "diode_direction": "COL2ROW", + "rgblight": { + "led_count": 12 + }, "ws2812": { "pin": "D0" }, diff --git a/keyboards/evyd13/ta65/config.h b/keyboards/evyd13/ta65/config.h index e17b637a1e..cfa335c00b 100644 --- a/keyboards/evyd13/ta65/config.h +++ b/keyboards/evyd13/ta65/config.h @@ -34,4 +34,3 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #define RGBLIGHT_EFFECT_RGB_TEST #define RGBLIGHT_EFFECT_ALTERNATING #define RGBLIGHT_EFFECT_TWINKLE -#define RGBLED_NUM 8 diff --git a/keyboards/evyd13/ta65/info.json b/keyboards/evyd13/ta65/info.json index d1195a597b..fa4fd552e9 100644 --- a/keyboards/evyd13/ta65/info.json +++ b/keyboards/evyd13/ta65/info.json @@ -18,6 +18,9 @@ {"pin_a": "B2", "pin_b": "B1"} ] }, + "rgblight": { + "led_count": 8 + }, "ws2812": { "pin": "E6" }, diff --git a/keyboards/evyd13/wonderland/config.h b/keyboards/evyd13/wonderland/config.h index 1f7440aa20..1fe33fc437 100644 --- a/keyboards/evyd13/wonderland/config.h +++ b/keyboards/evyd13/wonderland/config.h @@ -29,4 +29,3 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #define RGBLIGHT_EFFECT_RGB_TEST #define RGBLIGHT_EFFECT_ALTERNATING #define RGBLIGHT_EFFECT_TWINKLE -#define RGBLED_NUM 12 diff --git a/keyboards/evyd13/wonderland/info.json b/keyboards/evyd13/wonderland/info.json index 621be94232..5ac4bfb787 100644 --- a/keyboards/evyd13/wonderland/info.json +++ b/keyboards/evyd13/wonderland/info.json @@ -18,6 +18,9 @@ "esc_output": "F0", "led": "B1" }, + "rgblight": { + "led_count": 12 + }, "ws2812": { "pin": "B7" }, diff --git a/keyboards/exclusive/e65/config.h b/keyboards/exclusive/e65/config.h index 9d31e13dcb..cce43732e9 100644 --- a/keyboards/exclusive/e65/config.h +++ b/keyboards/exclusive/e65/config.h @@ -32,7 +32,3 @@ # define RGBLIGHT_EFFECT_RGB_TEST # define RGBLIGHT_EFFECT_ALTERNATING # define RGBLIGHT_EFFECT_TWINKLE -# define RGBLED_NUM 20 -# define RGBLIGHT_HUE_STEP 8 -# define RGBLIGHT_SAT_STEP 8 -# define RGBLIGHT_VAL_STEP 8 diff --git a/keyboards/exclusive/e65/info.json b/keyboards/exclusive/e65/info.json index 3fab8ca8ab..077d5d7cb9 100644 --- a/keyboards/exclusive/e65/info.json +++ b/keyboards/exclusive/e65/info.json @@ -21,6 +21,11 @@ "caps_lock": "B6", "on_state": 0 }, + "rgblight": { + "saturation_steps": 8, + "brightness_steps": 8, + "led_count": 20 + }, "ws2812": { "pin": "E6" }, diff --git a/keyboards/exclusive/e6_rgb/config.h b/keyboards/exclusive/e6_rgb/config.h index c6acec2658..2e74c06530 100644 --- a/keyboards/exclusive/e6_rgb/config.h +++ b/keyboards/exclusive/e6_rgb/config.h @@ -5,7 +5,6 @@ #pragma once //rgb light setting -#define RGBLED_NUM 6 #define RGBLIGHT_EFFECT_BREATHING #define RGBLIGHT_EFFECT_RAINBOW_MOOD #define RGBLIGHT_EFFECT_RAINBOW_SWIRL @@ -16,9 +15,6 @@ #define RGBLIGHT_EFFECT_RGB_TEST #define RGBLIGHT_EFFECT_ALTERNATING #define RGBLIGHT_EFFECT_TWINKLE -#define RGBLIGHT_HUE_STEP 8 -#define RGBLIGHT_SAT_STEP 8 -#define RGBLIGHT_VAL_STEP 8 #define DRIVER_ADDR_1 0b1010000 diff --git a/keyboards/exclusive/e6_rgb/info.json b/keyboards/exclusive/e6_rgb/info.json index 0381b209a8..167ce46917 100644 --- a/keyboards/exclusive/e6_rgb/info.json +++ b/keyboards/exclusive/e6_rgb/info.json @@ -16,6 +16,11 @@ "rows": ["F1", "F4", "F5", "F6", "D6"] }, "diode_direction": "COL2ROW", + "rgblight": { + "saturation_steps": 8, + "brightness_steps": 8, + "led_count": 6 + }, "ws2812": { "pin": "B7" }, diff --git a/keyboards/exclusive/e6v2/le/config.h b/keyboards/exclusive/e6v2/le/config.h index 8c0ffda30b..05d2733f8b 100644 --- a/keyboards/exclusive/e6v2/le/config.h +++ b/keyboards/exclusive/e6v2/le/config.h @@ -27,7 +27,3 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #define RGBLIGHT_EFFECT_RGB_TEST #define RGBLIGHT_EFFECT_ALTERNATING #define RGBLIGHT_EFFECT_TWINKLE -#define RGBLED_NUM 12 -#define RGBLIGHT_HUE_STEP 12 -#define RGBLIGHT_SAT_STEP 12 -#define RGBLIGHT_VAL_STEP 12 diff --git a/keyboards/exclusive/e6v2/le/info.json b/keyboards/exclusive/e6v2/le/info.json index 8fbbcbfea3..3f7987329b 100644 --- a/keyboards/exclusive/e6v2/le/info.json +++ b/keyboards/exclusive/e6v2/le/info.json @@ -23,6 +23,12 @@ "caps_lock": "B7", "on_state": 0 }, + "rgblight": { + "hue_steps": 12, + "saturation_steps": 12, + "brightness_steps": 12, + "led_count": 12 + }, "ws2812": { "pin": "E6" }, diff --git a/keyboards/exclusive/e6v2/le_bmc/config.h b/keyboards/exclusive/e6v2/le_bmc/config.h index bb3f00287e..b8be4dca5f 100644 --- a/keyboards/exclusive/e6v2/le_bmc/config.h +++ b/keyboards/exclusive/e6v2/le_bmc/config.h @@ -17,7 +17,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #pragma once -#define RGBLED_NUM 6 #define RGBLIGHT_EFFECT_BREATHING #define RGBLIGHT_EFFECT_RAINBOW_MOOD #define RGBLIGHT_EFFECT_RAINBOW_SWIRL diff --git a/keyboards/exclusive/e6v2/le_bmc/info.json b/keyboards/exclusive/e6v2/le_bmc/info.json index c0d2ffa868..29bf63bf52 100644 --- a/keyboards/exclusive/e6v2/le_bmc/info.json +++ b/keyboards/exclusive/e6v2/le_bmc/info.json @@ -15,6 +15,9 @@ "backlight": { "pin": "D4" }, + "rgblight": { + "led_count": 6 + }, "ws2812": { "driver": "i2c" }, diff --git a/keyboards/exclusive/e6v2/oe/config.h b/keyboards/exclusive/e6v2/oe/config.h index 6e9255bebb..05d2733f8b 100644 --- a/keyboards/exclusive/e6v2/oe/config.h +++ b/keyboards/exclusive/e6v2/oe/config.h @@ -27,7 +27,3 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #define RGBLIGHT_EFFECT_RGB_TEST #define RGBLIGHT_EFFECT_ALTERNATING #define RGBLIGHT_EFFECT_TWINKLE -#define RGBLED_NUM 8 -#define RGBLIGHT_HUE_STEP 12 -#define RGBLIGHT_SAT_STEP 12 -#define RGBLIGHT_VAL_STEP 12 diff --git a/keyboards/exclusive/e6v2/oe/info.json b/keyboards/exclusive/e6v2/oe/info.json index eef3f67847..6c102f043e 100644 --- a/keyboards/exclusive/e6v2/oe/info.json +++ b/keyboards/exclusive/e6v2/oe/info.json @@ -19,6 +19,12 @@ "breathing": true, "breathing_period": 3 }, + "rgblight": { + "hue_steps": 12, + "saturation_steps": 12, + "brightness_steps": 12, + "led_count": 8 + }, "ws2812": { "pin": "E2" }, diff --git a/keyboards/exclusive/e6v2/oe_bmc/config.h b/keyboards/exclusive/e6v2/oe_bmc/config.h index bb3f00287e..b8be4dca5f 100644 --- a/keyboards/exclusive/e6v2/oe_bmc/config.h +++ b/keyboards/exclusive/e6v2/oe_bmc/config.h @@ -17,7 +17,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #pragma once -#define RGBLED_NUM 6 #define RGBLIGHT_EFFECT_BREATHING #define RGBLIGHT_EFFECT_RAINBOW_MOOD #define RGBLIGHT_EFFECT_RAINBOW_SWIRL diff --git a/keyboards/exclusive/e6v2/oe_bmc/info.json b/keyboards/exclusive/e6v2/oe_bmc/info.json index 622d7db564..56c4fbdf57 100644 --- a/keyboards/exclusive/e6v2/oe_bmc/info.json +++ b/keyboards/exclusive/e6v2/oe_bmc/info.json @@ -15,6 +15,9 @@ "backlight": { "pin": "D4" }, + "rgblight": { + "led_count": 6 + }, "ws2812": { "driver": "i2c" }, diff --git a/keyboards/exclusive/e7v1/config.h b/keyboards/exclusive/e7v1/config.h index 896eb97b25..d702489ee7 100644 --- a/keyboards/exclusive/e7v1/config.h +++ b/keyboards/exclusive/e7v1/config.h @@ -16,7 +16,3 @@ #define RGBLIGHT_EFFECT_RGB_TEST #define RGBLIGHT_EFFECT_ALTERNATING #define RGBLIGHT_EFFECT_TWINKLE -#define RGBLED_NUM 20 -#define RGBLIGHT_HUE_STEP 8 -#define RGBLIGHT_SAT_STEP 8 -#define RGBLIGHT_VAL_STEP 8 diff --git a/keyboards/exclusive/e7v1/info.json b/keyboards/exclusive/e7v1/info.json index 42ec77a9fb..f71bc158c2 100644 --- a/keyboards/exclusive/e7v1/info.json +++ b/keyboards/exclusive/e7v1/info.json @@ -17,6 +17,11 @@ "pin": "B7", "levels": 6 }, + "rgblight": { + "saturation_steps": 8, + "brightness_steps": 8, + "led_count": 20 + }, "ws2812": { "pin": "E6" }, diff --git a/keyboards/exclusive/e7v1se/config.h b/keyboards/exclusive/e7v1se/config.h index f4f04f2bbe..1b6f748e1e 100644 --- a/keyboards/exclusive/e7v1se/config.h +++ b/keyboards/exclusive/e7v1se/config.h @@ -17,11 +17,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #pragma once - #define RGBLED_NUM 16 - #define RGBLIGHT_HUE_STEP 8 - #define RGBLIGHT_SAT_STEP 8 - #define RGBLIGHT_VAL_STEP 8 - #define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */ #define RGBLIGHT_EFFECT_BREATHING #define RGBLIGHT_EFFECT_RAINBOW_MOOD #define RGBLIGHT_EFFECT_RAINBOW_SWIRL diff --git a/keyboards/exclusive/e7v1se/info.json b/keyboards/exclusive/e7v1se/info.json index 3244831b4d..6675bc2b3d 100644 --- a/keyboards/exclusive/e7v1se/info.json +++ b/keyboards/exclusive/e7v1se/info.json @@ -17,6 +17,12 @@ "pin": "B7", "breathing": true }, + "rgblight": { + "saturation_steps": 8, + "brightness_steps": 8, + "led_count": 16, + "sleep": true + }, "ws2812": { "pin": "E2" }, diff --git a/keyboards/exclusive/e85/config.h b/keyboards/exclusive/e85/config.h index 730536b513..e0af849629 100644 --- a/keyboards/exclusive/e85/config.h +++ b/keyboards/exclusive/e85/config.h @@ -17,11 +17,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #pragma once - #define RGBLED_NUM 18 - #define RGBLIGHT_HUE_STEP 8 - #define RGBLIGHT_SAT_STEP 8 - #define RGBLIGHT_VAL_STEP 8 - #define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */ #define RGBLIGHT_EFFECT_BREATHING #define RGBLIGHT_EFFECT_RAINBOW_MOOD #define RGBLIGHT_EFFECT_RAINBOW_SWIRL diff --git a/keyboards/exclusive/e85/hotswap/info.json b/keyboards/exclusive/e85/hotswap/info.json index 60dc68eaf7..a6a3269fb5 100644 --- a/keyboards/exclusive/e85/hotswap/info.json +++ b/keyboards/exclusive/e85/hotswap/info.json @@ -18,6 +18,12 @@ "levels": 6, "breathing": true }, + "rgblight": { + "saturation_steps": 8, + "brightness_steps": 8, + "led_count": 18, + "sleep": true + }, "ws2812": { "pin": "E2" }, diff --git a/keyboards/exclusive/e85/soldered/info.json b/keyboards/exclusive/e85/soldered/info.json index c0f9128b52..fc89bd6d10 100644 --- a/keyboards/exclusive/e85/soldered/info.json +++ b/keyboards/exclusive/e85/soldered/info.json @@ -18,6 +18,12 @@ "levels": 6, "breathing": true }, + "rgblight": { + "saturation_steps": 8, + "brightness_steps": 8, + "led_count": 18, + "sleep": true + }, "ws2812": { "pin": "E2" }, diff --git a/keyboards/exent/config.h b/keyboards/exent/config.h index b062e20b68..1441c7581f 100644 --- a/keyboards/exent/config.h +++ b/keyboards/exent/config.h @@ -16,8 +16,6 @@ #pragma once -#define RGBLED_NUM 18 - #define RGBLIGHT_EFFECT_BREATHING #define RGBLIGHT_EFFECT_RAINBOW_MOOD #define RGBLIGHT_EFFECT_RAINBOW_SWIRL diff --git a/keyboards/exent/info.json b/keyboards/exent/info.json index 9f0f3e3945..ef4b00b905 100644 --- a/keyboards/exent/info.json +++ b/keyboards/exent/info.json @@ -16,6 +16,9 @@ "backlight": { "pin": "D4" }, + "rgblight": { + "led_count": 18 + }, "ws2812": { "driver": "i2c" }, diff --git a/keyboards/eyeohdesigns/babyv/config.h b/keyboards/eyeohdesigns/babyv/config.h index 4bfabf0e8a..dfc4bcd47c 100644 --- a/keyboards/eyeohdesigns/babyv/config.h +++ b/keyboards/eyeohdesigns/babyv/config.h @@ -17,11 +17,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #pragma once -#define RGBLED_NUM 12 -#define RGBLIGHT_HUE_STEP 8 -#define RGBLIGHT_SAT_STEP 8 -#define RGBLIGHT_VAL_STEP 8 -#define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */ #define RGBLIGHT_EFFECT_BREATHING #define RGBLIGHT_EFFECT_RAINBOW_MOOD #define RGBLIGHT_EFFECT_RAINBOW_SWIRL diff --git a/keyboards/eyeohdesigns/babyv/info.json b/keyboards/eyeohdesigns/babyv/info.json index f2d0ea53e6..8eccfbdec3 100644 --- a/keyboards/eyeohdesigns/babyv/info.json +++ b/keyboards/eyeohdesigns/babyv/info.json @@ -16,6 +16,12 @@ "backlight": { "pin": "B6" }, + "rgblight": { + "saturation_steps": 8, + "brightness_steps": 8, + "led_count": 12, + "sleep": true + }, "ws2812": { "pin": "B7" }, diff --git a/keyboards/eyeohdesigns/theboulevard/config.h b/keyboards/eyeohdesigns/theboulevard/config.h index e2f7092f98..96697db31f 100644 --- a/keyboards/eyeohdesigns/theboulevard/config.h +++ b/keyboards/eyeohdesigns/theboulevard/config.h @@ -17,9 +17,4 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #pragma once -#define RGBLED_NUM 2 -#define RGBLIGHT_HUE_STEP 8 -#define RGBLIGHT_SAT_STEP 8 -#define RGBLIGHT_VAL_STEP 8 -#define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */ #define RGBLIGHT_EFFECT_BREATHING diff --git a/keyboards/eyeohdesigns/theboulevard/info.json b/keyboards/eyeohdesigns/theboulevard/info.json index a94968a989..b7e911d5dc 100644 --- a/keyboards/eyeohdesigns/theboulevard/info.json +++ b/keyboards/eyeohdesigns/theboulevard/info.json @@ -18,6 +18,12 @@ {"pin_a": "F5", "pin_b": "F4", "resolution": 2} ] }, + "rgblight": { + "saturation_steps": 8, + "brightness_steps": 8, + "led_count": 2, + "sleep": true + }, "ws2812": { "pin": "F6" }, diff --git a/keyboards/ez_maker/directpins/teensy_32/rules.mk b/keyboards/ez_maker/directpins/teensy_32/rules.mk index 9803d8cc70..abd2f7fce9 100644 --- a/keyboards/ez_maker/directpins/teensy_32/rules.mk +++ b/keyboards/ez_maker/directpins/teensy_32/rules.mk @@ -1,4 +1,2 @@ USE_CHIBIOS_CONTRIB = yes -# Enter lower-power sleep mode when on the ChibiOS idle thread -OPT_DEFS += -DCORTEX_ENABLE_WFI_IDLE=TRUE diff --git a/keyboards/ez_maker/directpins/teensy_lc/rules.mk b/keyboards/ez_maker/directpins/teensy_lc/rules.mk index 9803d8cc70..abd2f7fce9 100644 --- a/keyboards/ez_maker/directpins/teensy_lc/rules.mk +++ b/keyboards/ez_maker/directpins/teensy_lc/rules.mk @@ -1,4 +1,2 @@ USE_CHIBIOS_CONTRIB = yes -# Enter lower-power sleep mode when on the ChibiOS idle thread -OPT_DEFS += -DCORTEX_ENABLE_WFI_IDLE=TRUE diff --git a/keyboards/facew/config.h b/keyboards/facew/config.h index ddc21dae30..d849732a07 100644 --- a/keyboards/facew/config.h +++ b/keyboards/facew/config.h @@ -17,9 +17,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #pragma once - -#define RGBLED_NUM 16 - #define RGBLIGHT_EFFECT_BREATHING #define RGBLIGHT_EFFECT_RAINBOW_MOOD #define RGBLIGHT_EFFECT_RAINBOW_SWIRL diff --git a/keyboards/facew/info.json b/keyboards/facew/info.json index 514c64f2c3..d28bd4447e 100644 --- a/keyboards/facew/info.json +++ b/keyboards/facew/info.json @@ -16,6 +16,9 @@ "backlight": { "pin": "D4" }, + "rgblight": { + "led_count": 16 + }, "ws2812": { "driver": "i2c" }, diff --git a/keyboards/fallacy/config.h b/keyboards/fallacy/config.h index 4e5ad26583..1fe5f41924 100755 --- a/keyboards/fallacy/config.h +++ b/keyboards/fallacy/config.h @@ -40,4 +40,3 @@ #define RGBLIGHT_EFFECT_RGB_TEST #define RGBLIGHT_EFFECT_ALTERNATING #define RGBLIGHT_EFFECT_TWINKLE -#define RGBLED_NUM 14 diff --git a/keyboards/fallacy/info.json b/keyboards/fallacy/info.json index e51283eb19..f92926b72f 100644 --- a/keyboards/fallacy/info.json +++ b/keyboards/fallacy/info.json @@ -12,6 +12,9 @@ "rows": ["B1", "B2", "B3", "C6", "C7"] }, "diode_direction": "COL2ROW", + "rgblight": { + "led_count": 14 + }, "ws2812": { "pin": "D2" }, diff --git a/keyboards/fancytech/fancyalice66/config.h b/keyboards/fancytech/fancyalice66/config.h index b6fcea0c6b..9f56bd3a20 100644 --- a/keyboards/fancytech/fancyalice66/config.h +++ b/keyboards/fancytech/fancyalice66/config.h @@ -4,8 +4,6 @@ #pragma once #ifdef RGB_MATRIX_ENABLE -# define WS2812_DI_PIN B0 -# define RGB_DI_PIN B0 # define RGB_MATRIX_LED_COUNT 82 /* RGB Matrix effect */ diff --git a/keyboards/fancytech/fancyalice66/info.json b/keyboards/fancytech/fancyalice66/info.json index 1be7f37639..525a19d32c 100644 --- a/keyboards/fancytech/fancyalice66/info.json +++ b/keyboards/fancytech/fancyalice66/info.json @@ -165,6 +165,9 @@ "pid": "0x3663", "vid": "0xECED" }, + "ws2812": { + "pin": "B0" + }, "layouts": { "LAYOUT": { "layout": [ diff --git a/keyboards/fc660c/config.h b/keyboards/fc660c/config.h index 670b0f8e38..cd23bdb2b8 100644 --- a/keyboards/fc660c/config.h +++ b/keyboards/fc660c/config.h @@ -22,10 +22,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #define MATRIX_ROWS 5 #define MATRIX_COLS 16 -//#define DIODE_DIRECTION - -#define TAPPING_TERM 175 - /* * Feature disable options * These options are also useful to firmware size reduction. diff --git a/keyboards/fc660c/info.json b/keyboards/fc660c/info.json index 8250619bdc..e65ed35dae 100644 --- a/keyboards/fc660c/info.json +++ b/keyboards/fc660c/info.json @@ -8,6 +8,9 @@ "pid": "0x660C", "device_version": "1.0.0" }, + "tapping": { + "term": 175 + }, "indicators": { "caps_lock": "B6", "on_state": 0 diff --git a/keyboards/ffkeebs/puca/config.h b/keyboards/ffkeebs/puca/config.h index 23a2f15d99..450a31173a 100644 --- a/keyboards/ffkeebs/puca/config.h +++ b/keyboards/ffkeebs/puca/config.h @@ -29,7 +29,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #define RGBLIGHT_EFFECT_ALTERNATING #define RGBLIGHT_EFFECT_TWINKLE #define RGBLIGHT_DEFAULT_MODE RGBLIGHT_MODE_STATIC_LIGHT - #define RGBLED_NUM 8 #endif /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ diff --git a/keyboards/ffkeebs/puca/info.json b/keyboards/ffkeebs/puca/info.json index 356c148d8e..645efa8551 100644 --- a/keyboards/ffkeebs/puca/info.json +++ b/keyboards/ffkeebs/puca/info.json @@ -18,6 +18,9 @@ {"pin_a": "F4", "pin_b": "F5"} ] }, + "rgblight": { + "led_count": 8 + }, "ws2812": { "pin": "D4" }, diff --git a/keyboards/fjlabs/7vhotswap/config.h b/keyboards/fjlabs/7vhotswap/config.h index 4aa0cd52ea..cf9d7a9850 100644 --- a/keyboards/fjlabs/7vhotswap/config.h +++ b/keyboards/fjlabs/7vhotswap/config.h @@ -23,7 +23,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #define LOCKING_RESYNC_ENABLE /* Define RGB */ -#define RGBLED_NUM 4 #define RGBLIGHT_EFFECT_BREATHING #define RGBLIGHT_EFFECT_RAINBOW_MOOD #define RGBLIGHT_EFFECT_RAINBOW_SWIRL diff --git a/keyboards/fjlabs/7vhotswap/info.json b/keyboards/fjlabs/7vhotswap/info.json index 6e026ecc58..c6a186387d 100644 --- a/keyboards/fjlabs/7vhotswap/info.json +++ b/keyboards/fjlabs/7vhotswap/info.json @@ -13,6 +13,9 @@ "rows": ["B0", "F4", "F1", "F7", "F6", "F5"] }, "diode_direction": "COL2ROW", + "rgblight": { + "led_count": 4 + }, "ws2812": { "pin": "C7" }, diff --git a/keyboards/fjlabs/avalon/config.h b/keyboards/fjlabs/avalon/config.h index 4204f1d129..edc330d4fb 100644 --- a/keyboards/fjlabs/avalon/config.h +++ b/keyboards/fjlabs/avalon/config.h @@ -23,7 +23,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #define LOCKING_RESYNC_ENABLE /* Define RGB Underglow */ -#define RGBLED_NUM 6 #define RGBLIGHT_EFFECT_BREATHING #define RGBLIGHT_EFFECT_RAINBOW_MOOD #define RGBLIGHT_EFFECT_RAINBOW_SWIRL diff --git a/keyboards/fjlabs/avalon/info.json b/keyboards/fjlabs/avalon/info.json index ba9239629c..387cdbe99c 100644 --- a/keyboards/fjlabs/avalon/info.json +++ b/keyboards/fjlabs/avalon/info.json @@ -16,6 +16,9 @@ "indicators": { "caps_lock": "C7" }, + "rgblight": { + "led_count": 6 + }, "ws2812": { "pin": "D6" }, diff --git a/keyboards/fjlabs/bks65/config.h b/keyboards/fjlabs/bks65/config.h index 3b205ce76f..5f5f69421c 100644 --- a/keyboards/fjlabs/bks65/config.h +++ b/keyboards/fjlabs/bks65/config.h @@ -23,7 +23,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #define LOCKING_RESYNC_ENABLE /* Define RGB Underglow */ -#define RGBLED_NUM 24 #define RGBLIGHT_EFFECT_BREATHING #define RGBLIGHT_EFFECT_RAINBOW_MOOD #define RGBLIGHT_EFFECT_RAINBOW_SWIRL diff --git a/keyboards/fjlabs/bks65/info.json b/keyboards/fjlabs/bks65/info.json index 7b468da941..7772d751d6 100644 --- a/keyboards/fjlabs/bks65/info.json +++ b/keyboards/fjlabs/bks65/info.json @@ -16,6 +16,9 @@ "indicators": { "caps_lock": "C7" }, + "rgblight": { + "led_count": 24 + }, "ws2812": { "pin": "B0" }, diff --git a/keyboards/fjlabs/bks65solder/config.h b/keyboards/fjlabs/bks65solder/config.h index 3b205ce76f..5f5f69421c 100644 --- a/keyboards/fjlabs/bks65solder/config.h +++ b/keyboards/fjlabs/bks65solder/config.h @@ -23,7 +23,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #define LOCKING_RESYNC_ENABLE /* Define RGB Underglow */ -#define RGBLED_NUM 24 #define RGBLIGHT_EFFECT_BREATHING #define RGBLIGHT_EFFECT_RAINBOW_MOOD #define RGBLIGHT_EFFECT_RAINBOW_SWIRL diff --git a/keyboards/fjlabs/bks65solder/info.json b/keyboards/fjlabs/bks65solder/info.json index 27c3ece3ba..d073372ef6 100644 --- a/keyboards/fjlabs/bks65solder/info.json +++ b/keyboards/fjlabs/bks65solder/info.json @@ -13,6 +13,9 @@ "rows": ["F4", "F1", "F7", "F6", "F5"] }, "diode_direction": "COL2ROW", + "rgblight": { + "led_count": 24 + }, "ws2812": { "pin": "B0" }, diff --git a/keyboards/fjlabs/kf87/config.h b/keyboards/fjlabs/kf87/config.h index 4131a88429..b14096f20a 100644 --- a/keyboards/fjlabs/kf87/config.h +++ b/keyboards/fjlabs/kf87/config.h @@ -23,7 +23,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #define LOCKING_RESYNC_ENABLE /* Define RGB */ -#define RGBLED_NUM 87 #define RGBLIGHT_EFFECT_BREATHING #define RGBLIGHT_EFFECT_RAINBOW_MOOD #define RGBLIGHT_EFFECT_RAINBOW_SWIRL diff --git a/keyboards/fjlabs/kf87/info.json b/keyboards/fjlabs/kf87/info.json index 415405a9e8..0016552ab5 100644 --- a/keyboards/fjlabs/kf87/info.json +++ b/keyboards/fjlabs/kf87/info.json @@ -21,6 +21,7 @@ "pin": "C2" }, "rgblight": { + "led_count": 87, "max_brightness": 86 }, "processor": "at90usb646", diff --git a/keyboards/fjlabs/kyuu/config.h b/keyboards/fjlabs/kyuu/config.h index 5fa5e84acd..f0f64903be 100644 --- a/keyboards/fjlabs/kyuu/config.h +++ b/keyboards/fjlabs/kyuu/config.h @@ -23,7 +23,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #define LOCKING_RESYNC_ENABLE /* Define Badge RGB */ -#define RGBLED_NUM 16 #define RGBLIGHT_EFFECT_BREATHING #define RGBLIGHT_EFFECT_RAINBOW_MOOD #define RGBLIGHT_EFFECT_RAINBOW_SWIRL diff --git a/keyboards/fjlabs/kyuu/info.json b/keyboards/fjlabs/kyuu/info.json index 058cb4ea23..f57ee482dc 100644 --- a/keyboards/fjlabs/kyuu/info.json +++ b/keyboards/fjlabs/kyuu/info.json @@ -13,6 +13,9 @@ "rows": ["F4", "F1", "F7", "F6", "F5"] }, "diode_direction": "COL2ROW", + "rgblight": { + "led_count": 16 + }, "ws2812": { "pin": "C7" }, diff --git a/keyboards/fjlabs/mk61rgbansi/config.h b/keyboards/fjlabs/mk61rgbansi/config.h index 89e8c6c221..e83868463a 100644 --- a/keyboards/fjlabs/mk61rgbansi/config.h +++ b/keyboards/fjlabs/mk61rgbansi/config.h @@ -23,7 +23,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #define LOCKING_RESYNC_ENABLE /* Define RGB Underglow */ -#define RGBLED_NUM 64 #define RGBLIGHT_EFFECT_BREATHING #define RGBLIGHT_EFFECT_RAINBOW_MOOD #define RGBLIGHT_EFFECT_RAINBOW_SWIRL diff --git a/keyboards/fjlabs/mk61rgbansi/info.json b/keyboards/fjlabs/mk61rgbansi/info.json index 7e99f1bd10..1f1078be69 100644 --- a/keyboards/fjlabs/mk61rgbansi/info.json +++ b/keyboards/fjlabs/mk61rgbansi/info.json @@ -17,6 +17,7 @@ "pin": "F7" }, "rgblight": { + "led_count": 64, "max_brightness": 108 }, "processor": "atmega32u4", diff --git a/keyboards/fjlabs/ready100/config.h b/keyboards/fjlabs/ready100/config.h index 1292feb117..14307e1e34 100644 --- a/keyboards/fjlabs/ready100/config.h +++ b/keyboards/fjlabs/ready100/config.h @@ -23,7 +23,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #define LOCKING_RESYNC_ENABLE /* Define RGB Underglow */ -#define RGBLED_NUM 64 #define RGBLIGHT_EFFECT_BREATHING #define RGBLIGHT_EFFECT_RAINBOW_MOOD #define RGBLIGHT_EFFECT_RAINBOW_SWIRL diff --git a/keyboards/fjlabs/ready100/info.json b/keyboards/fjlabs/ready100/info.json index 689f396b3e..403d4801d1 100644 --- a/keyboards/fjlabs/ready100/info.json +++ b/keyboards/fjlabs/ready100/info.json @@ -17,6 +17,7 @@ "pin": "F7" }, "rgblight": { + "led_count": 64, "max_brightness": 108 }, "processor": "atmega32u4", diff --git a/keyboards/fjlabs/solanis/config.h b/keyboards/fjlabs/solanis/config.h index 569d563e45..d0ae4b866f 100644 --- a/keyboards/fjlabs/solanis/config.h +++ b/keyboards/fjlabs/solanis/config.h @@ -23,7 +23,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #define LOCKING_RESYNC_ENABLE /* Define RGB */ -#define RGBLED_NUM 24 #define RGBLIGHT_EFFECT_BREATHING #define RGBLIGHT_EFFECT_RAINBOW_MOOD #define RGBLIGHT_EFFECT_RAINBOW_SWIRL diff --git a/keyboards/fjlabs/solanis/info.json b/keyboards/fjlabs/solanis/info.json index 2f1bea8698..917befc2e3 100644 --- a/keyboards/fjlabs/solanis/info.json +++ b/keyboards/fjlabs/solanis/info.json @@ -17,6 +17,7 @@ "pin": "B7" }, "rgblight": { + "led_count": 24, "max_brightness": 172 }, "processor": "at90usb646", diff --git a/keyboards/fjlabs/swordfish/config.h b/keyboards/fjlabs/swordfish/config.h index be5bee6e44..089b49ea03 100644 --- a/keyboards/fjlabs/swordfish/config.h +++ b/keyboards/fjlabs/swordfish/config.h @@ -23,7 +23,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #define LOCKING_RESYNC_ENABLE /* Define RGB */ -#define RGBLED_NUM 1 #define RGBLIGHT_EFFECT_BREATHING #define RGBLIGHT_EFFECT_RAINBOW_MOOD #define RGBLIGHT_EFFECT_RAINBOW_SWIRL diff --git a/keyboards/fjlabs/swordfish/info.json b/keyboards/fjlabs/swordfish/info.json index 98fb7f6f49..bc17ac108b 100644 --- a/keyboards/fjlabs/swordfish/info.json +++ b/keyboards/fjlabs/swordfish/info.json @@ -13,88 +13,168 @@ "rows": ["B0", "B1", "C7", "C6", "B6"] }, "diode_direction": "COL2ROW", + "rgblight": { + "led_count": 1 + }, "ws2812": { "pin": "D3" }, "processor": "atmega32u4", "bootloader": "atmel-dfu", "layouts": { - "LAYOUT_alice_all": { + "LAYOUT_2u_bs": { + "layout": [ + {"matrix": [0, 0], "x": 0, "y": 0}, + {"matrix": [0, 1], "x": 1, "y": 0}, + {"matrix": [0, 2], "x": 2, "y": 0}, + {"matrix": [0, 3], "x": 3, "y": 0}, + {"matrix": [0, 4], "x": 4, "y": 0}, + {"matrix": [1, 5], "x": 5, "y": 0}, + {"matrix": [0, 5], "x": 6, "y": 0}, + {"matrix": [0, 6], "x": 9, "y": 0}, + {"matrix": [0, 7], "x": 10, "y": 0}, + {"matrix": [0, 8], "x": 11, "y": 0}, + {"matrix": [0, 9], "x": 12, "y": 0}, + {"matrix": [0, 10], "x": 13, "y": 0}, + {"matrix": [0, 11], "x": 14, "y": 0}, + {"matrix": [0, 12], "x": 15, "y": 0, "w": 2}, + {"matrix": [0, 14], "x": 17.25, "y": 0}, + + {"matrix": [1, 0], "x": 0, "y": 1, "w": 1.5}, + {"matrix": [1, 1], "x": 1.5, "y": 1}, + {"matrix": [1, 2], "x": 2.5, "y": 1}, + {"matrix": [1, 3], "x": 3.5, "y": 1}, + {"matrix": [1, 4], "x": 4.5, "y": 1}, + {"matrix": [2, 5], "x": 5.5, "y": 1}, + {"matrix": [1, 6], "x": 8.5, "y": 1}, + {"matrix": [1, 7], "x": 9.5, "y": 1}, + {"matrix": [1, 8], "x": 10.5, "y": 1}, + {"matrix": [1, 9], "x": 11.5, "y": 1}, + {"matrix": [1, 10], "x": 12.5, "y": 1}, + {"matrix": [1, 11], "x": 13.5, "y": 1}, + {"matrix": [1, 12], "x": 14.5, "y": 1}, + {"matrix": [1, 13], "x": 15.5, "y": 1, "w": 1.5}, + {"matrix": [1, 14], "x": 17.25, "y": 1}, + + {"matrix": [2, 0], "x": 0, "y": 2, "w": 1.75}, + {"matrix": [2, 1], "x": 1.75, "y": 2}, + {"matrix": [2, 2], "x": 2.75, "y": 2}, + {"matrix": [2, 3], "x": 3.75, "y": 2}, + {"matrix": [2, 4], "x": 4.75, "y": 2}, + {"matrix": [3, 5], "x": 5.75, "y": 2}, + {"matrix": [2, 6], "x": 8.75, "y": 2}, + {"matrix": [2, 7], "x": 9.75, "y": 2}, + {"matrix": [2, 8], "x": 10.75, "y": 2}, + {"matrix": [2, 9], "x": 11.75, "y": 2}, + {"matrix": [2, 10], "x": 12.75, "y": 2}, + {"matrix": [2, 11], "x": 13.75, "y": 2}, + {"matrix": [2, 13], "x": 14.75, "y": 2, "w": 2.25}, + {"matrix": [2, 14], "x": 17.25, "y": 2}, + + {"matrix": [3, 0], "x": 0, "y": 3, "w": 2.25}, + {"matrix": [3, 1], "x": 2.25, "y": 3}, + {"matrix": [3, 2], "x": 3.25, "y": 3}, + {"matrix": [3, 3], "x": 4.25, "y": 3}, + {"matrix": [3, 4], "x": 5.25, "y": 3}, + {"matrix": [4, 5], "x": 6.25, "y": 3}, + {"matrix": [3, 6], "x": 8.25, "y": 3}, + {"matrix": [3, 7], "x": 9.25, "y": 3}, + {"matrix": [3, 8], "x": 10.25, "y": 3}, + {"matrix": [3, 9], "x": 11.25, "y": 3}, + {"matrix": [3, 10], "x": 12.25, "y": 3}, + {"matrix": [3, 11], "x": 13.25, "y": 3}, + {"matrix": [3, 12], "x": 14.25, "y": 3, "w": 1.75}, + {"matrix": [3, 13], "x": 16.25, "y": 3.25}, + + {"matrix": [4, 0], "x": 0, "y": 4, "w": 1.25}, + {"matrix": [4, 1], "x": 1.25, "y": 4, "w": 1.25}, + {"matrix": [4, 2], "x": 3.25, "y": 4, "w": 1.25}, + {"matrix": [4, 4], "x": 4.5, "y": 4, "w": 2.75}, + {"matrix": [4, 7], "x": 8.25, "y": 4, "w": 2.25}, + {"matrix": [4, 8], "x": 10.5, "y": 4, "w": 1.25}, + {"matrix": [4, 10], "x": 12.25, "y": 4, "w": 1.25}, + {"matrix": [4, 11], "x": 13.5, "y": 4, "w": 1.25}, + {"matrix": [4, 12], "x": 15.25, "y": 4.25}, + {"matrix": [4, 13], "x": 16.25, "y": 4.25}, + {"matrix": [4, 14], "x": 17.25, "y": 4.25} + ] + }, + "LAYOUT_split_bs": { "layout": [ {"matrix": [0, 0], "x": 0, "y": 0}, {"matrix": [0, 1], "x": 1, "y": 0}, {"matrix": [0, 2], "x": 2, "y": 0}, {"matrix": [0, 3], "x": 3, "y": 0}, {"matrix": [0, 4], "x": 4, "y": 0}, - {"matrix": [0, 5], "x": 5, "y": 0}, - {"matrix": [0, 6], "x": 6, "y": 0}, - {"matrix": [0, 7], "x": 8.5, "y": 0}, - {"matrix": [0, 8], "x": 9.5, "y": 0}, - {"matrix": [0, 9], "x": 10.5, "y": 0}, - {"matrix": [0, 10], "x": 11.5, "y": 0}, - {"matrix": [0, 11], "x": 12.5, "y": 0}, - {"matrix": [0, 12], "x": 13.5, "y": 0}, - {"matrix": [0, 13], "x": 14.5, "y": 0}, - {"matrix": [0, 14], "x": 15.5, "y": 0}, - {"matrix": [1, 0], "x": 16.75, "y": 0}, + {"matrix": [1, 5], "x": 5, "y": 0}, + {"matrix": [0, 5], "x": 6, "y": 0}, + {"matrix": [0, 6], "x": 9, "y": 0}, + {"matrix": [0, 7], "x": 10, "y": 0}, + {"matrix": [0, 8], "x": 11, "y": 0}, + {"matrix": [0, 9], "x": 12, "y": 0}, + {"matrix": [0, 10], "x": 13, "y": 0}, + {"matrix": [0, 11], "x": 14, "y": 0}, + {"matrix": [0, 12], "x": 15, "y": 0}, + {"matrix": [0, 13], "x": 16, "y": 0}, + {"matrix": [0, 14], "x": 17.25, "y": 0}, - {"matrix": [1, 1], "x": 0, "y": 1, "w": 1.5}, - {"matrix": [1, 2], "x": 1.5, "y": 1}, - {"matrix": [1, 3], "x": 2.5, "y": 1}, - {"matrix": [1, 4], "x": 3.5, "y": 1}, - {"matrix": [1, 5], "x": 4.5, "y": 1}, - {"matrix": [1, 6], "x": 5.5, "y": 1}, - {"matrix": [1, 7], "x": 8, "y": 1}, - {"matrix": [1, 8], "x": 9, "y": 1}, - {"matrix": [1, 9], "x": 10, "y": 1}, - {"matrix": [1, 10], "x": 11, "y": 1}, - {"matrix": [1, 11], "x": 12, "y": 1}, - {"matrix": [1, 12], "x": 13, "y": 1}, - {"matrix": [1, 13], "x": 14, "y": 1}, - {"matrix": [1, 14], "x": 15, "y": 1, "w": 1.5}, - {"matrix": [2, 0], "x": 16.75, "y": 1}, + {"matrix": [1, 0], "x": 0, "y": 1, "w": 1.5}, + {"matrix": [1, 1], "x": 1.5, "y": 1}, + {"matrix": [1, 2], "x": 2.5, "y": 1}, + {"matrix": [1, 3], "x": 3.5, "y": 1}, + {"matrix": [1, 4], "x": 4.5, "y": 1}, + {"matrix": [2, 5], "x": 5.5, "y": 1}, + {"matrix": [1, 6], "x": 8.5, "y": 1}, + {"matrix": [1, 7], "x": 9.5, "y": 1}, + {"matrix": [1, 8], "x": 10.5, "y": 1}, + {"matrix": [1, 9], "x": 11.5, "y": 1}, + {"matrix": [1, 10], "x": 12.5, "y": 1}, + {"matrix": [1, 11], "x": 13.5, "y": 1}, + {"matrix": [1, 12], "x": 14.5, "y": 1}, + {"matrix": [1, 13], "x": 15.5, "y": 1, "w": 1.5}, + {"matrix": [1, 14], "x": 17.25, "y": 1}, - {"matrix": [2, 1], "x": 0, "y": 2, "w": 1.75}, - {"matrix": [2, 2], "x": 1.75, "y": 2}, - {"matrix": [2, 3], "x": 2.75, "y": 2}, - {"matrix": [2, 4], "x": 3.75, "y": 2}, - {"matrix": [2, 5], "x": 4.75, "y": 2}, - {"matrix": [2, 6], "x": 5.75, "y": 2}, - {"matrix": [2, 7], "x": 8.25, "y": 2}, - {"matrix": [2, 8], "x": 9.25, "y": 2}, - {"matrix": [2, 9], "x": 10.25, "y": 2}, - {"matrix": [2, 10], "x": 11.25, "y": 2}, - {"matrix": [2, 11], "x": 12.25, "y": 2}, - {"matrix": [2, 13], "x": 13.25, "y": 2}, - {"matrix": [2, 14], "x": 14.25, "y": 2, "w": 2.25}, - {"matrix": [3, 0], "x": 16.75, "y": 2}, + {"matrix": [2, 0], "x": 0, "y": 2, "w": 1.75}, + {"matrix": [2, 1], "x": 1.75, "y": 2}, + {"matrix": [2, 2], "x": 2.75, "y": 2}, + {"matrix": [2, 3], "x": 3.75, "y": 2}, + {"matrix": [2, 4], "x": 4.75, "y": 2}, + {"matrix": [3, 5], "x": 5.75, "y": 2}, + {"matrix": [2, 6], "x": 8.75, "y": 2}, + {"matrix": [2, 7], "x": 9.75, "y": 2}, + {"matrix": [2, 8], "x": 10.75, "y": 2}, + {"matrix": [2, 9], "x": 11.75, "y": 2}, + {"matrix": [2, 10], "x": 12.75, "y": 2}, + {"matrix": [2, 11], "x": 13.75, "y": 2}, + {"matrix": [2, 13], "x": 14.75, "y": 2, "w": 2.25}, + {"matrix": [2, 14], "x": 17.25, "y": 2}, - {"matrix": [3, 1], "x": 0, "y": 3, "w": 2.25}, - {"matrix": [3, 2], "x": 2.25, "y": 3}, - {"matrix": [3, 3], "x": 3.25, "y": 3}, - {"matrix": [3, 4], "x": 4.25, "y": 3}, - {"matrix": [3, 5], "x": 5.25, "y": 3}, - {"matrix": [3, 6], "x": 6.25, "y": 3}, - {"matrix": [3, 7], "x": 8, "y": 3}, - {"matrix": [3, 8], "x": 9, "y": 3}, - {"matrix": [3, 9], "x": 10, "y": 3}, - {"matrix": [3, 10], "x": 11, "y": 3}, - {"matrix": [3, 11], "x": 12, "y": 3}, - {"matrix": [3, 12], "x": 13, "y": 3}, - {"matrix": [3, 13], "x": 14, "y": 3, "w": 1.5}, - {"matrix": [4, 0], "x": 15.75, "y": 3.25}, + {"matrix": [3, 0], "x": 0, "y": 3, "w": 2.25}, + {"matrix": [3, 1], "x": 2.25, "y": 3}, + {"matrix": [3, 2], "x": 3.25, "y": 3}, + {"matrix": [3, 3], "x": 4.25, "y": 3}, + {"matrix": [3, 4], "x": 5.25, "y": 3}, + {"matrix": [4, 5], "x": 6.25, "y": 3}, + {"matrix": [3, 6], "x": 8.25, "y": 3}, + {"matrix": [3, 7], "x": 9.25, "y": 3}, + {"matrix": [3, 8], "x": 10.25, "y": 3}, + {"matrix": [3, 9], "x": 11.25, "y": 3}, + {"matrix": [3, 10], "x": 12.25, "y": 3}, + {"matrix": [3, 11], "x": 13.25, "y": 3}, + {"matrix": [3, 12], "x": 14.25, "y": 3, "w": 1.75}, + {"matrix": [3, 13], "x": 16.25, "y": 3.25}, - {"matrix": [4, 1], "x": 0, "y": 4, "w": 1.25}, - {"matrix": [4, 2], "x": 1.25, "y": 4, "w": 1.25}, - {"matrix": [4, 4], "x": 3.25, "y": 4, "w": 1.25}, - {"matrix": [4, 5], "x": 4.5, "y": 4, "w": 2.75}, - {"matrix": [4, 7], "x": 8, "y": 4, "w": 2.25}, - {"matrix": [4, 8], "x": 10.25, "y": 4, "w": 1.25}, - {"matrix": [4, 10], "x": 12, "y": 4, "w": 1.25}, - {"matrix": [4, 11], "x": 13.25, "y": 4, "w": 1.25}, - {"matrix": [4, 12], "x": 14.75, "y": 4.25}, - {"matrix": [4, 13], "x": 15.75, "y": 4.25}, - {"matrix": [4, 14], "x": 16.75, "y": 4.25} + {"matrix": [4, 0], "x": 0, "y": 4, "w": 1.25}, + {"matrix": [4, 1], "x": 1.25, "y": 4, "w": 1.25}, + {"matrix": [4, 2], "x": 3.25, "y": 4, "w": 1.25}, + {"matrix": [4, 4], "x": 4.5, "y": 4, "w": 2.75}, + {"matrix": [4, 7], "x": 8.25, "y": 4, "w": 2.25}, + {"matrix": [4, 8], "x": 10.5, "y": 4, "w": 1.25}, + {"matrix": [4, 10], "x": 12.25, "y": 4, "w": 1.25}, + {"matrix": [4, 11], "x": 13.5, "y": 4, "w": 1.25}, + {"matrix": [4, 12], "x": 15.25, "y": 4.25}, + {"matrix": [4, 13], "x": 16.25, "y": 4.25}, + {"matrix": [4, 14], "x": 17.25, "y": 4.25} ] } } diff --git a/keyboards/fjlabs/swordfish/keymaps/default/keymap.c b/keyboards/fjlabs/swordfish/keymaps/default/keymap.c index ecce4f1a7b..2b2c8cf19f 100644 --- a/keyboards/fjlabs/swordfish/keymaps/default/keymap.c +++ b/keyboards/fjlabs/swordfish/keymaps/default/keymap.c @@ -21,19 +21,19 @@ enum layers { const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { - [_LAYER0] = LAYOUT_alice_all( - KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSLS, KC_GRV, KC_MPLY, - KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_5, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSPC, KC_VOLU, - KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_T, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, KC_VOLD, - KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_G, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_UP, - KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_B, KC_SPC, KC_RALT, MO(1), KC_RCTL, KC_LEFT, KC_DOWN, KC_RGHT + [_LAYER0] = LAYOUT_split_bs( + KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSLS, KC_GRV, KC_MPLY, + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSPC, KC_VOLU, + KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, KC_VOLD, + KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_UP, + KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_SPC, KC_RALT, MO(1), KC_RCTL, KC_LEFT, KC_DOWN, KC_RGHT ), - [_LAYER1] = LAYOUT_alice_all( - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, RGB_MOD, RGB_RMOD, RGB_TOG, - KC_TRNS, KC_TRNS, KC_UP, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, RGB_VAI, - KC_TRNS, KC_LEFT, KC_DOWN, KC_RGHT, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, RGB_VAD, - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_PGUP, - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_HOME, KC_PGDN, KC_END + [_LAYER1] = LAYOUT_split_bs( + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, RGB_MOD, RGB_RMOD, RGB_TOG, + KC_TRNS, KC_TRNS, KC_UP, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, RGB_VAI, + KC_TRNS, KC_LEFT, KC_DOWN, KC_RGHT, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, RGB_VAD, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_PGUP, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_HOME, KC_PGDN, KC_END ) }; diff --git a/keyboards/fjlabs/swordfish/keymaps/via/keymap.c b/keyboards/fjlabs/swordfish/keymaps/via/keymap.c index 50ade4767e..7428985841 100644 --- a/keyboards/fjlabs/swordfish/keymaps/via/keymap.c +++ b/keyboards/fjlabs/swordfish/keymaps/via/keymap.c @@ -23,35 +23,35 @@ enum layers { const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { - [_LAYER0] = LAYOUT_alice_all( - KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSLS, KC_GRV, KC_MPLY, - KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_5, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSPC, KC_VOLU, - KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_T, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, KC_VOLD, - KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_G, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_UP, - KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_B, KC_SPC, KC_RALT, MO(1), KC_RCTL, KC_LEFT, KC_DOWN, KC_RGHT + [_LAYER0] = LAYOUT_split_bs( + KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSLS, KC_GRV, KC_MPLY, + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSPC, KC_VOLU, + KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, KC_VOLD, + KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_UP, + KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_SPC, KC_RALT, MO(1), KC_RCTL, KC_LEFT, KC_DOWN, KC_RGHT ), - [_LAYER1] = LAYOUT_alice_all( - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, RGB_MOD, RGB_RMOD, RGB_TOG, - KC_TRNS, KC_TRNS, KC_UP, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, RGB_VAI, - KC_TRNS, KC_LEFT, KC_DOWN, KC_RGHT, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, RGB_VAD, - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_PGUP, - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_HOME, KC_PGDN, KC_END + [_LAYER1] = LAYOUT_split_bs( + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, RGB_MOD, RGB_RMOD, RGB_TOG, + KC_TRNS, KC_TRNS, KC_UP, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, RGB_VAI, + KC_TRNS, KC_LEFT, KC_DOWN, KC_RGHT, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, RGB_VAD, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_PGUP, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_HOME, KC_PGDN, KC_END ), - [_LAYER2] = LAYOUT_alice_all( - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS + [_LAYER2] = LAYOUT_split_bs( + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS ), - [_LAYER3] = LAYOUT_alice_all( - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS + [_LAYER3] = LAYOUT_split_bs( + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS ) }; diff --git a/keyboards/fjlabs/tf60ansi/config.h b/keyboards/fjlabs/tf60ansi/config.h index 89e8c6c221..e83868463a 100644 --- a/keyboards/fjlabs/tf60ansi/config.h +++ b/keyboards/fjlabs/tf60ansi/config.h @@ -23,7 +23,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #define LOCKING_RESYNC_ENABLE /* Define RGB Underglow */ -#define RGBLED_NUM 64 #define RGBLIGHT_EFFECT_BREATHING #define RGBLIGHT_EFFECT_RAINBOW_MOOD #define RGBLIGHT_EFFECT_RAINBOW_SWIRL diff --git a/keyboards/fjlabs/tf60ansi/info.json b/keyboards/fjlabs/tf60ansi/info.json index b07464ad36..308ab23457 100644 --- a/keyboards/fjlabs/tf60ansi/info.json +++ b/keyboards/fjlabs/tf60ansi/info.json @@ -17,6 +17,7 @@ "pin": "F7" }, "rgblight": { + "led_count": 64, "max_brightness": 108 }, "processor": "atmega32u4", diff --git a/keyboards/fjlabs/tf60v2/config.h b/keyboards/fjlabs/tf60v2/config.h index 89e8c6c221..e83868463a 100644 --- a/keyboards/fjlabs/tf60v2/config.h +++ b/keyboards/fjlabs/tf60v2/config.h @@ -23,7 +23,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #define LOCKING_RESYNC_ENABLE /* Define RGB Underglow */ -#define RGBLED_NUM 64 #define RGBLIGHT_EFFECT_BREATHING #define RGBLIGHT_EFFECT_RAINBOW_MOOD #define RGBLIGHT_EFFECT_RAINBOW_SWIRL diff --git a/keyboards/fjlabs/tf60v2/info.json b/keyboards/fjlabs/tf60v2/info.json index 6e9a5bf821..4b2edf7d73 100644 --- a/keyboards/fjlabs/tf60v2/info.json +++ b/keyboards/fjlabs/tf60v2/info.json @@ -17,6 +17,7 @@ "pin": "F7" }, "rgblight": { + "led_count": 64, "max_brightness": 108 }, "processor": "atmega32u4", diff --git a/keyboards/fjlabs/tf65rgbv2/config.h b/keyboards/fjlabs/tf65rgbv2/config.h index 5932113c94..e83868463a 100644 --- a/keyboards/fjlabs/tf65rgbv2/config.h +++ b/keyboards/fjlabs/tf65rgbv2/config.h @@ -23,7 +23,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #define LOCKING_RESYNC_ENABLE /* Define RGB Underglow */ -#define RGBLED_NUM 68 #define RGBLIGHT_EFFECT_BREATHING #define RGBLIGHT_EFFECT_RAINBOW_MOOD #define RGBLIGHT_EFFECT_RAINBOW_SWIRL diff --git a/keyboards/fjlabs/tf65rgbv2/info.json b/keyboards/fjlabs/tf65rgbv2/info.json index 098bad3fcf..0769600824 100644 --- a/keyboards/fjlabs/tf65rgbv2/info.json +++ b/keyboards/fjlabs/tf65rgbv2/info.json @@ -17,6 +17,7 @@ "pin": "F7" }, "rgblight": { + "led_count": 68, "max_brightness": 96 }, "processor": "atmega32u4", diff --git a/keyboards/flehrad/bigswitch/config.h b/keyboards/flehrad/bigswitch/config.h index ddf4546bbb..f633202f97 100644 --- a/keyboards/flehrad/bigswitch/config.h +++ b/keyboards/flehrad/bigswitch/config.h @@ -34,5 +34,4 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #define RGBLIGHT_EFFECT_RGB_TEST #define RGBLIGHT_EFFECT_ALTERNATING #define RGBLIGHT_EFFECT_TWINKLE -#define RGBLED_NUM 8 #endif diff --git a/keyboards/flehrad/bigswitch/info.json b/keyboards/flehrad/bigswitch/info.json index 095f8284e4..13a3500853 100644 --- a/keyboards/flehrad/bigswitch/info.json +++ b/keyboards/flehrad/bigswitch/info.json @@ -7,6 +7,9 @@ "pid": "0xB195", "device_version": "0.0.1" }, + "rgblight": { + "led_count": 8 + }, "ws2812": { "pin": "D3" }, diff --git a/keyboards/fleuron/config.h b/keyboards/fleuron/config.h index 34197c8578..64f691e305 100644 --- a/keyboards/fleuron/config.h +++ b/keyboards/fleuron/config.h @@ -38,7 +38,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. //#define NO_ACTION_TAPPING //#define NO_ACTION_ONESHOT -#define RGBLED_NUM 18 // Number of LEDs in your strip #define RGBLIGHT_EFFECT_BREATHING #define RGBLIGHT_EFFECT_RAINBOW_MOOD #define RGBLIGHT_EFFECT_RAINBOW_SWIRL diff --git a/keyboards/fleuron/info.json b/keyboards/fleuron/info.json index c2ff091ace..81237e2cbf 100644 --- a/keyboards/fleuron/info.json +++ b/keyboards/fleuron/info.json @@ -12,6 +12,9 @@ "rows": ["F0", "F1", "F4", "F5", "F6", "F7"] }, "diode_direction": "COL2ROW", + "rgblight": { + "led_count": 18 + }, "ws2812": { "pin": "E6" }, diff --git a/keyboards/fleuron/keymaps/dollartacos/keymap.c b/keyboards/fleuron/keymaps/dollartacos/keymap.c index e2bef353ef..90490bb02f 100644 --- a/keyboards/fleuron/keymaps/dollartacos/keymap.c +++ b/keyboards/fleuron/keymaps/dollartacos/keymap.c @@ -145,15 +145,3 @@ bool process_record_user(uint16_t keycode, keyrecord_t *record) { } return true; } - -void matrix_init_user(void) { - -} - -void matrix_scan_user(void) { - -} - -void led_set_user(uint8_t usb_led) { - -} diff --git a/keyboards/flx/virgo/config.h b/keyboards/flx/virgo/config.h index 84306f36a0..fc97b59fa9 100644 --- a/keyboards/flx/virgo/config.h +++ b/keyboards/flx/virgo/config.h @@ -17,11 +17,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #pragma once - #define RGBLED_NUM 0 - #define RGBLIGHT_HUE_STEP 8 - #define RGBLIGHT_SAT_STEP 8 - #define RGBLIGHT_VAL_STEP 8 - #define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */ #define RGBLIGHT_EFFECT_BREATHING #define RGBLIGHT_EFFECT_RAINBOW_MOOD #define RGBLIGHT_EFFECT_RAINBOW_SWIRL diff --git a/keyboards/flx/virgo/info.json b/keyboards/flx/virgo/info.json index f7ce772482..962c4326b9 100644 --- a/keyboards/flx/virgo/info.json +++ b/keyboards/flx/virgo/info.json @@ -17,6 +17,12 @@ "pin": "B7", "levels": 5 }, + "rgblight": { + "saturation_steps": 8, + "brightness_steps": 8, + "led_count": 0, + "sleep": true + }, "ws2812": { "pin": "B3" }, diff --git a/keyboards/flxlb/zplit/config.h b/keyboards/flxlb/zplit/config.h index 55edfade82..7d8e1d90f1 100644 --- a/keyboards/flxlb/zplit/config.h +++ b/keyboards/flxlb/zplit/config.h @@ -29,10 +29,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #define LOCKING_RESYNC_ENABLE /* ws2812 RGB LED */ -#define RGBLED_NUM 16 -#define RGBLIGHT_LED_MAP { 0, 1, 2, 3, 4, 5, 6, 7, 15, 14, 13, 12, 11, 10, 9, 8} -#define RGBLED_SPLIT { 8, 8 } -#define RGBLIGHT_SPLIT #define RGBLIGHT_EFFECT_BREATHING #define RGBLIGHT_EFFECT_RAINBOW_MOOD #define RGBLIGHT_EFFECT_RAINBOW_SWIRL diff --git a/keyboards/flxlb/zplit/info.json b/keyboards/flxlb/zplit/info.json index a2c27492cf..a4dfb714b7 100644 --- a/keyboards/flxlb/zplit/info.json +++ b/keyboards/flxlb/zplit/info.json @@ -18,6 +18,11 @@ {"pin_a": "B0", "pin_b": "D2"} ] }, + "rgblight": { + "led_count": 16, + "led_map": [0, 1, 2, 3, 4, 5, 6, 7, 15, 14, 13, 12, 11, 10, 9, 8], + "split_count": [8, 8] + }, "ws2812": { "pin": "D3" }, diff --git a/keyboards/fortitude60/rev1/config.h b/keyboards/fortitude60/rev1/config.h index d13ea1c845..5dec5df1f1 100644 --- a/keyboards/fortitude60/rev1/config.h +++ b/keyboards/fortitude60/rev1/config.h @@ -27,10 +27,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. /* Locking resynchronize hack */ #define LOCKING_RESYNC_ENABLE -/* ws2812 RGB LED */ -#ifdef RGBLIGHT_ENABLE - #define RGBLED_NUM 18 // Number of LEDs */ -#endif /* * Feature disable options * These options are also useful to firmware size reduction. diff --git a/keyboards/fortitude60/rev1/info.json b/keyboards/fortitude60/rev1/info.json index 175e621e23..0ae02161cd 100644 --- a/keyboards/fortitude60/rev1/info.json +++ b/keyboards/fortitude60/rev1/info.json @@ -17,6 +17,9 @@ "pin": "B5", "levels": 9 }, + "rgblight": { + "led_count": 18 + }, "ws2812": { "pin": "B5" }, diff --git a/keyboards/foxlab/key65/hotswap/config.h b/keyboards/foxlab/key65/hotswap/config.h index 8ee5b2a14a..0e4a96d81d 100644 --- a/keyboards/foxlab/key65/hotswap/config.h +++ b/keyboards/foxlab/key65/hotswap/config.h @@ -16,11 +16,6 @@ #pragma once - #define RGBLED_NUM 8 - #define RGBLIGHT_HUE_STEP 8 - #define RGBLIGHT_SAT_STEP 8 - #define RGBLIGHT_VAL_STEP 8 - #define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */ #define RGBLIGHT_EFFECT_BREATHING #define RGBLIGHT_EFFECT_RAINBOW_MOOD #define RGBLIGHT_EFFECT_RAINBOW_SWIRL diff --git a/keyboards/foxlab/key65/hotswap/info.json b/keyboards/foxlab/key65/hotswap/info.json index 619f59671d..8811a8e2ee 100644 --- a/keyboards/foxlab/key65/hotswap/info.json +++ b/keyboards/foxlab/key65/hotswap/info.json @@ -17,6 +17,12 @@ "pin": "B7", "levels": 5 }, + "rgblight": { + "saturation_steps": 8, + "brightness_steps": 8, + "led_count": 8, + "sleep": true + }, "ws2812": { "pin": "E2" }, diff --git a/keyboards/foxlab/key65/universal/config.h b/keyboards/foxlab/key65/universal/config.h index 003eb0a72c..0e4a96d81d 100644 --- a/keyboards/foxlab/key65/universal/config.h +++ b/keyboards/foxlab/key65/universal/config.h @@ -16,11 +16,6 @@ #pragma once - #define RGBLED_NUM 6 - #define RGBLIGHT_HUE_STEP 8 - #define RGBLIGHT_SAT_STEP 8 - #define RGBLIGHT_VAL_STEP 8 - #define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */ #define RGBLIGHT_EFFECT_BREATHING #define RGBLIGHT_EFFECT_RAINBOW_MOOD #define RGBLIGHT_EFFECT_RAINBOW_SWIRL diff --git a/keyboards/foxlab/key65/universal/info.json b/keyboards/foxlab/key65/universal/info.json index ef7c4386c8..056aa112db 100644 --- a/keyboards/foxlab/key65/universal/info.json +++ b/keyboards/foxlab/key65/universal/info.json @@ -17,6 +17,12 @@ "pin": "B7", "levels": 5 }, + "rgblight": { + "saturation_steps": 8, + "brightness_steps": 8, + "led_count": 6, + "sleep": true + }, "ws2812": { "pin": "E2" }, diff --git a/keyboards/foxlab/leaf60/hotswap/config.h b/keyboards/foxlab/leaf60/hotswap/config.h index a7b28ae1db..4b19ee06e7 100644 --- a/keyboards/foxlab/leaf60/hotswap/config.h +++ b/keyboards/foxlab/leaf60/hotswap/config.h @@ -17,11 +17,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #pragma once - #define RGBLED_NUM 8 - #define RGBLIGHT_HUE_STEP 8 - #define RGBLIGHT_SAT_STEP 8 - #define RGBLIGHT_VAL_STEP 8 - #define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */ #define RGBLIGHT_EFFECT_BREATHING #define RGBLIGHT_EFFECT_RAINBOW_MOOD #define RGBLIGHT_EFFECT_RAINBOW_SWIRL diff --git a/keyboards/foxlab/leaf60/hotswap/info.json b/keyboards/foxlab/leaf60/hotswap/info.json index f8b3c35edd..144311d89a 100644 --- a/keyboards/foxlab/leaf60/hotswap/info.json +++ b/keyboards/foxlab/leaf60/hotswap/info.json @@ -22,6 +22,12 @@ "caps_lock": "E6", "on_state": 0 }, + "rgblight": { + "saturation_steps": 8, + "brightness_steps": 8, + "led_count": 8, + "sleep": true + }, "ws2812": { "pin": "E2" }, diff --git a/keyboards/foxlab/leaf60/universal/config.h b/keyboards/foxlab/leaf60/universal/config.h index a7b28ae1db..4b19ee06e7 100644 --- a/keyboards/foxlab/leaf60/universal/config.h +++ b/keyboards/foxlab/leaf60/universal/config.h @@ -17,11 +17,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #pragma once - #define RGBLED_NUM 8 - #define RGBLIGHT_HUE_STEP 8 - #define RGBLIGHT_SAT_STEP 8 - #define RGBLIGHT_VAL_STEP 8 - #define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */ #define RGBLIGHT_EFFECT_BREATHING #define RGBLIGHT_EFFECT_RAINBOW_MOOD #define RGBLIGHT_EFFECT_RAINBOW_SWIRL diff --git a/keyboards/foxlab/leaf60/universal/info.json b/keyboards/foxlab/leaf60/universal/info.json index a277830d9d..7847228417 100644 --- a/keyboards/foxlab/leaf60/universal/info.json +++ b/keyboards/foxlab/leaf60/universal/info.json @@ -21,6 +21,12 @@ "caps_lock": "E6", "on_state": 0 }, + "rgblight": { + "saturation_steps": 8, + "brightness_steps": 8, + "led_count": 8, + "sleep": true + }, "ws2812": { "pin": "E2" }, diff --git a/keyboards/foxlab/time80/config.h b/keyboards/foxlab/time80/config.h index f68ee9bd55..0b0ee83971 100644 --- a/keyboards/foxlab/time80/config.h +++ b/keyboards/foxlab/time80/config.h @@ -17,12 +17,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #pragma once -#define RGBLED_NUM 16 -//#define RGBLIGHT_HUE_STEP 8 -//#define RGBLIGHT_SAT_STEP 8 -//#define RGBLIGHT_VAL_STEP 8 -//#define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */ - /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ #define LOCKING_SUPPORT_ENABLE /* Locking resynchronize hack */ diff --git a/keyboards/foxlab/time80/info.json b/keyboards/foxlab/time80/info.json index f5b8a7eb0c..b19e3c3104 100644 --- a/keyboards/foxlab/time80/info.json +++ b/keyboards/foxlab/time80/info.json @@ -16,6 +16,9 @@ "backlight": { "pin": "D4" }, + "rgblight": { + "led_count": 16 + }, "ws2812": { "driver": "i2c" }, diff --git a/keyboards/foxlab/time_re/hotswap/config.h b/keyboards/foxlab/time_re/hotswap/config.h index 03e8b6b3d4..6b2c1721f8 100644 --- a/keyboards/foxlab/time_re/hotswap/config.h +++ b/keyboards/foxlab/time_re/hotswap/config.h @@ -17,11 +17,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #pragma once - #define RGBLED_NUM 5 - #define RGBLIGHT_HUE_STEP 8 - #define RGBLIGHT_SAT_STEP 8 - #define RGBLIGHT_VAL_STEP 8 - #define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */ # define RGBLIGHT_EFFECT_BREATHING # define RGBLIGHT_EFFECT_RAINBOW_MOOD # define RGBLIGHT_EFFECT_RAINBOW_SWIRL diff --git a/keyboards/foxlab/time_re/hotswap/info.json b/keyboards/foxlab/time_re/hotswap/info.json index 1253771b5c..5b5c8b11ea 100644 --- a/keyboards/foxlab/time_re/hotswap/info.json +++ b/keyboards/foxlab/time_re/hotswap/info.json @@ -24,7 +24,11 @@ "pin": "E2" }, "rgblight": { - "max_brightness": 200 + "saturation_steps": 8, + "brightness_steps": 8, + "led_count": 5, + "max_brightness": 200, + "sleep": true }, "processor": "atmega32u4", "bootloader": "atmel-dfu", diff --git a/keyboards/foxlab/time_re/universal/config.h b/keyboards/foxlab/time_re/universal/config.h index 03e8b6b3d4..6b2c1721f8 100644 --- a/keyboards/foxlab/time_re/universal/config.h +++ b/keyboards/foxlab/time_re/universal/config.h @@ -17,11 +17,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #pragma once - #define RGBLED_NUM 5 - #define RGBLIGHT_HUE_STEP 8 - #define RGBLIGHT_SAT_STEP 8 - #define RGBLIGHT_VAL_STEP 8 - #define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */ # define RGBLIGHT_EFFECT_BREATHING # define RGBLIGHT_EFFECT_RAINBOW_MOOD # define RGBLIGHT_EFFECT_RAINBOW_SWIRL diff --git a/keyboards/foxlab/time_re/universal/info.json b/keyboards/foxlab/time_re/universal/info.json index 8bb9a58ee2..2aa773e588 100644 --- a/keyboards/foxlab/time_re/universal/info.json +++ b/keyboards/foxlab/time_re/universal/info.json @@ -20,7 +20,11 @@ "pin": "E2" }, "rgblight": { - "max_brightness": 200 + "saturation_steps": 8, + "brightness_steps": 8, + "led_count": 5, + "max_brightness": 200, + "sleep": true }, "indicators": { "caps_lock": "E6", diff --git a/keyboards/frooastboard/nano/config.h b/keyboards/frooastboard/nano/config.h index 32d34ead42..bf0b6ea79b 100644 --- a/keyboards/frooastboard/nano/config.h +++ b/keyboards/frooastboard/nano/config.h @@ -16,14 +16,6 @@ #pragma once -#define RGBLED_NUM 8 - -#define RGBLIGHT_SLEEP - -#define RGBLIGHT_HUE_STEP 8 -#define RGBLIGHT_SAT_STEP 8 -#define RGBLIGHT_VAL_STEP 8 - #define RGBLIGHT_DEFAULT_HUE 234 #define RGBLIGHT_DEFAULT_VAL 190 diff --git a/keyboards/frooastboard/nano/info.json b/keyboards/frooastboard/nano/info.json index d1a77d256d..f309c802d5 100644 --- a/keyboards/frooastboard/nano/info.json +++ b/keyboards/frooastboard/nano/info.json @@ -24,6 +24,12 @@ "pid": "0x6F21", "device_version": "0.0.1" }, + "rgblight": { + "saturation_steps": 8, + "brightness_steps": 8, + "led_count": 8, + "sleep": true + }, "ws2812": { "pin": "B4" }, diff --git a/keyboards/ft/mars65/config.h b/keyboards/ft/mars65/config.h index bfe825dcc9..1cdab6b8fc 100644 --- a/keyboards/ft/mars65/config.h +++ b/keyboards/ft/mars65/config.h @@ -3,11 +3,6 @@ #pragma once - #define RGBLED_NUM 24 - #define RGBLIGHT_HUE_STEP 8 - #define RGBLIGHT_SAT_STEP 8 - #define RGBLIGHT_VAL_STEP 8 - #define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */ #define RGBLIGHT_EFFECT_BREATHING #define RGBLIGHT_EFFECT_RAINBOW_MOOD #define RGBLIGHT_EFFECT_RAINBOW_SWIRL diff --git a/keyboards/ft/mars65/info.json b/keyboards/ft/mars65/info.json index 2160ae9be6..664867655c 100644 --- a/keyboards/ft/mars65/info.json +++ b/keyboards/ft/mars65/info.json @@ -20,7 +20,11 @@ "pin": "E6" }, "rgblight": { - "max_brightness": 130 + "saturation_steps": 8, + "brightness_steps": 8, + "led_count": 24, + "max_brightness": 130, + "sleep": true }, "processor": "atmega32u4", "bootloader": "atmel-dfu", diff --git a/keyboards/ft/mars80/config.h b/keyboards/ft/mars80/config.h index 116c09d6ac..d849732a07 100644 --- a/keyboards/ft/mars80/config.h +++ b/keyboards/ft/mars80/config.h @@ -17,9 +17,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #pragma once - -#define RGBLED_NUM 20 - #define RGBLIGHT_EFFECT_BREATHING #define RGBLIGHT_EFFECT_RAINBOW_MOOD #define RGBLIGHT_EFFECT_RAINBOW_SWIRL diff --git a/keyboards/ft/mars80/info.json b/keyboards/ft/mars80/info.json index 5801c63a23..80c47565ad 100644 --- a/keyboards/ft/mars80/info.json +++ b/keyboards/ft/mars80/info.json @@ -16,6 +16,9 @@ "backlight": { "pin": "D4" }, + "rgblight": { + "led_count": 20 + }, "ws2812": { "driver": "i2c" }, diff --git a/keyboards/fungo/rev1/config.h b/keyboards/fungo/rev1/config.h index 187a7809bc..bebed352e2 100644 --- a/keyboards/fungo/rev1/config.h +++ b/keyboards/fungo/rev1/config.h @@ -23,16 +23,8 @@ /** public parameter **/ /*************************************/ -#define MATRIX_IO_DELAY 15 // default 30 -#define TAP_CODE_DELAY 50 // default 0, disabled - /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ #define LOCKING_SUPPORT_ENABLE /* Locking resynchronize hack */ #define LOCKING_RESYNC_ENABLE - -//지정된 횟수로 눌러야 토글됨 -#define TAPPING_TOGGLE 3 - - diff --git a/keyboards/fungo/rev1/info.json b/keyboards/fungo/rev1/info.json index 2874f3d5e4..d153f9f834 100644 --- a/keyboards/fungo/rev1/info.json +++ b/keyboards/fungo/rev1/info.json @@ -10,7 +10,8 @@ }, "matrix_pins": { "cols": ["F4", "F5", "F6", "F7", "B1", "B3", "B2"], - "rows": ["D4", "C6", "D7", "E6", "B4", "B5"] + "rows": ["D4", "C6", "D7", "E6", "B4", "B5"], + "io_delay": 15 }, "diode_direction": "COL2ROW", "split": { @@ -22,9 +23,15 @@ } } }, + "qmk": { + "tap_keycode_delay": 50 + }, "processor": "atmega32u4", "bootloader": "caterina", "debounce": 3, + "tapping": { + "toggle": 3 + }, "layout_aliases": { "LAYOUT_fungo_split_num": "LAYOUT" }, diff --git a/keyboards/gami_studio/lex60/config.h b/keyboards/gami_studio/lex60/config.h index ba2a345045..0d7d5228d2 100644 --- a/keyboards/gami_studio/lex60/config.h +++ b/keyboards/gami_studio/lex60/config.h @@ -17,7 +17,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #pragma once -#define RGBLED_NUM 12 #define RGBLIGHT_EFFECT_BREATHING #define RGBLIGHT_EFFECT_RAINBOW_MOOD #define RGBLIGHT_EFFECT_RAINBOW_SWIRL diff --git a/keyboards/gami_studio/lex60/info.json b/keyboards/gami_studio/lex60/info.json index b5b59df7aa..f63f6e2c31 100644 --- a/keyboards/gami_studio/lex60/info.json +++ b/keyboards/gami_studio/lex60/info.json @@ -8,6 +8,9 @@ "pid": "0x0160", "device_version": "0.0.1" }, + "rgblight": { + "led_count": 12 + }, "ws2812": { "pin": "D1" }, diff --git a/keyboards/gboards/ergotaco/config.h b/keyboards/gboards/ergotaco/config.h index 456eb3f9d9..0ab992eac3 100644 --- a/keyboards/gboards/ergotaco/config.h +++ b/keyboards/gboards/ergotaco/config.h @@ -32,9 +32,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #define MOUSEKEY_TIME_TO_MAX 60 #define MOUSEKEY_MAX_SPEED 7 #define MOUSEKEY_WHEEL_DELAY 0 -#define TAPPING_TOGGLE 1 - -#define TAPPING_TERM 200 /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ #define LOCKING_SUPPORT_ENABLE diff --git a/keyboards/gboards/ergotaco/info.json b/keyboards/gboards/ergotaco/info.json index 1de1f3ab85..80558ad692 100644 --- a/keyboards/gboards/ergotaco/info.json +++ b/keyboards/gboards/ergotaco/info.json @@ -10,6 +10,9 @@ }, "processor": "atmega32u4", "bootloader": "atmel-dfu", + "tapping": { + "toggle": 1 + }, "layouts": { "LAYOUT": { "layout": [ diff --git a/keyboards/gboards/georgi/config.h b/keyboards/gboards/georgi/config.h index db2ff42a1e..f0785f24bc 100644 --- a/keyboards/gboards/georgi/config.h +++ b/keyboards/gboards/georgi/config.h @@ -37,9 +37,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #define MOUSEKEY_TIME_TO_MAX 60 #define MOUSEKEY_MAX_SPEED 7 #define MOUSEKEY_WHEEL_DELAY 0 -#define TAPPING_TOGGLE 2 - -#define TAPPING_TERM 200 /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ #define LOCKING_SUPPORT_ENABLE diff --git a/keyboards/gboards/georgi/info.json b/keyboards/gboards/georgi/info.json index 0a654eaa4a..51737f75af 100644 --- a/keyboards/gboards/georgi/info.json +++ b/keyboards/gboards/georgi/info.json @@ -11,6 +11,9 @@ }, "processor": "atmega32u4", "bootloader": "atmel-dfu", + "tapping": { + "toggle": 2 + }, "layout_aliases": { "LAYOUT_georgi": "LAYOUT" }, diff --git a/keyboards/gboards/gergo/config.h b/keyboards/gboards/gergo/config.h index dbff6ccf6f..44cb5a4304 100644 --- a/keyboards/gboards/gergo/config.h +++ b/keyboards/gboards/gergo/config.h @@ -41,9 +41,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #define MOUSEKEY_TIME_TO_MAX 60 #define MOUSEKEY_MAX_SPEED 7 #define MOUSEKEY_WHEEL_DELAY 0 -#define TAPPING_TOGGLE 1 - -#define TAPPING_TERM 200 /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ #define LOCKING_SUPPORT_ENABLE diff --git a/keyboards/gboards/gergo/info.json b/keyboards/gboards/gergo/info.json index 53711cb271..65b184366b 100644 --- a/keyboards/gboards/gergo/info.json +++ b/keyboards/gboards/gergo/info.json @@ -13,6 +13,9 @@ }, "processor": "atmega32u4", "bootloader": "atmel-dfu", + "tapping": { + "toggle": 1 + }, "layout_aliases": { "LAYOUT_gergo": "LAYOUT" }, diff --git a/keyboards/geekboards/macropad_v2/config.h b/keyboards/geekboards/macropad_v2/config.h index 344ccf3fff..47f9064e45 100644 --- a/keyboards/geekboards/macropad_v2/config.h +++ b/keyboards/geekboards/macropad_v2/config.h @@ -16,7 +16,6 @@ #pragma once -#define RGBLED_NUM 42 #define RGB_MATRIX_LED_COUNT 42 // PWM RGB Underglow Defines @@ -86,5 +85,3 @@ #define RGB_DISABLE_WHEN_USB_SUSPENDED #define WAIT_FOR_USB - -#define TAP_CODE_DELAY 10 diff --git a/keyboards/geekboards/macropad_v2/info.json b/keyboards/geekboards/macropad_v2/info.json index 504238b21c..52db89c06a 100644 --- a/keyboards/geekboards/macropad_v2/info.json +++ b/keyboards/geekboards/macropad_v2/info.json @@ -8,6 +8,9 @@ "pid": "0xA372", "device_version": "0.0.2" }, + "qmk": { + "tap_keycode_delay": 10 + }, "ws2812": { "pin": "A7", "driver": "pwm" diff --git a/keyboards/geekboards/macropad_v2/rules.mk b/keyboards/geekboards/macropad_v2/rules.mk index b7807ae418..c49a369dd0 100644 --- a/keyboards/geekboards/macropad_v2/rules.mk +++ b/keyboards/geekboards/macropad_v2/rules.mk @@ -12,5 +12,3 @@ RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow AUDIO_ENABLE = no # Audio output RGB_MATRIX_ENABLE = yes -# Enter lower-power sleep mode when on the ChibiOS idle thread -OPT_DEFS += -DCORTEX_ENABLE_WFI_IDLE=TRUE diff --git a/keyboards/geonworks/frogmini/fmh/rules.mk b/keyboards/geonworks/frogmini/fmh/rules.mk index 683a20e5c0..1f63f8feef 100644 --- a/keyboards/geonworks/frogmini/fmh/rules.mk +++ b/keyboards/geonworks/frogmini/fmh/rules.mk @@ -16,5 +16,3 @@ BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality EEPROM_DRIVER = i2c -# Enter lower-power sleep mode when on the ChibiOS idle thread -OPT_DEFS += -DCORTEX_ENABLE_WFI_IDLE=TRUE diff --git a/keyboards/geonworks/frogmini/fms/rules.mk b/keyboards/geonworks/frogmini/fms/rules.mk index d847becc1a..dfd36d0f82 100644 --- a/keyboards/geonworks/frogmini/fms/rules.mk +++ b/keyboards/geonworks/frogmini/fms/rules.mk @@ -16,5 +16,3 @@ BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality EEPROM_DRIVER = i2c -# Enter lower-power sleep mode when on the ChibiOS idle thread -OPT_DEFS += -DCORTEX_ENABLE_WFI_IDLE=TRUE diff --git a/keyboards/gh60/satan/config.h b/keyboards/gh60/satan/config.h index 1fbb35b3a2..0dd6c10aa0 100644 --- a/keyboards/gh60/satan/config.h +++ b/keyboards/gh60/satan/config.h @@ -34,10 +34,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #define RGBLIGHT_EFFECT_RGB_TEST #define RGBLIGHT_EFFECT_ALTERNATING #define RGBLIGHT_EFFECT_TWINKLE -#define RGBLED_NUM 8 -#define RGBLIGHT_HUE_STEP 10 -#define RGBLIGHT_SAT_STEP 17 -#define RGBLIGHT_VAL_STEP 17 /* * Feature disable options diff --git a/keyboards/gh60/satan/info.json b/keyboards/gh60/satan/info.json index 6432d8eb45..08e73d2270 100644 --- a/keyboards/gh60/satan/info.json +++ b/keyboards/gh60/satan/info.json @@ -17,6 +17,10 @@ "pin": "B6", "levels": 4 }, + "rgblight": { + "hue_steps": 10, + "led_count": 8 + }, "ws2812": { "pin": "E2" }, diff --git a/keyboards/gh60/satan/keymaps/addcninblue/rules.mk b/keyboards/gh60/satan/keymaps/addcninblue/rules.mk index b8c05a5984..fe07e497f9 100644 --- a/keyboards/gh60/satan/keymaps/addcninblue/rules.mk +++ b/keyboards/gh60/satan/keymaps/addcninblue/rules.mk @@ -12,7 +12,7 @@ NKRO_ENABLE = yes # Nkey Rollover - if this doesn't work, see here: htt BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality MIDI_ENABLE = no # MIDI controls AUDIO_ENABLE = no # Audio output on port C6 -UNICODEMAP_ENABLE = no # This allows sending unicode symbols using X(<unicode>) in your keymap. +UNICODEMAP_ENABLE = no UNICODE_ENABLE = no # Unicode UCIS_ENABLE = no # Keep in mind that not all will work (See WinCompose for details on Windows). BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID diff --git a/keyboards/gh60/v1p3/config.h b/keyboards/gh60/v1p3/config.h index c294394eca..ca30d472c8 100644 --- a/keyboards/gh60/v1p3/config.h +++ b/keyboards/gh60/v1p3/config.h @@ -17,11 +17,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #pragma once - #define RGBLED_NUM 10 - #define RGBLIGHT_HUE_STEP 8 - #define RGBLIGHT_SAT_STEP 8 - #define RGBLIGHT_VAL_STEP 8 - #define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */ # define RGBLIGHT_EFFECT_BREATHING # define RGBLIGHT_EFFECT_RAINBOW_MOOD # define RGBLIGHT_EFFECT_RAINBOW_SWIRL diff --git a/keyboards/gh60/v1p3/info.json b/keyboards/gh60/v1p3/info.json index 191cca4f57..7057634fb1 100644 --- a/keyboards/gh60/v1p3/info.json +++ b/keyboards/gh60/v1p3/info.json @@ -17,6 +17,12 @@ "pin": "B6", "levels": 15 }, + "rgblight": { + "saturation_steps": 8, + "brightness_steps": 8, + "led_count": 10, + "sleep": true + }, "ws2812": { "pin": "F0" }, diff --git a/keyboards/gh80_3000/keymaps/ansi_std/keymap.c b/keyboards/gh80_3000/keymaps/ansi_std/keymap.c index f33767ca64..f99d522ead 100644 --- a/keyboards/gh80_3000/keymaps/ansi_std/keymap.c +++ b/keyboards/gh80_3000/keymaps/ansi_std/keymap.c @@ -12,23 +12,29 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { ) }; -void led_set_user(uint8_t usb_led) { - - if (usb_led & (1 << USB_LED_NUM_LOCK)) { - DDRB |= (1 << 5); PORTB &= ~(1 << 5); +bool led_update_user(led_t led_state) { + if (led_state.num_lock) { + DDRB |= (1 << 5); + PORTB &= ~(1 << 5); } else { - DDRB &= ~(1 << 5); PORTB &= ~(1 << 5); + DDRB &= ~(1 << 5); + PORTB &= ~(1 << 5); } - if (usb_led & (1 << USB_LED_CAPS_LOCK)) { - DDRB |= (1 << 6); PORTB &= ~(1 << 6); + if (led_state.caps_lock) { + DDRB |= (1 << 6); + PORTB &= ~(1 << 6); } else { - DDRB &= ~(1 << 6); PORTB &= ~(1 << 6); + DDRB &= ~(1 << 6); + PORTB &= ~(1 << 6); } - if (usb_led & (1 << USB_LED_SCROLL_LOCK)) { - DDRB |= (1 << 7); PORTB &= ~(1 << 7); + if (led_state.scroll_lock) { + DDRB |= (1 << 7); + PORTB &= ~(1 << 7); } else { - DDRB &= ~(1 << 7); PORTB &= ~(1 << 7); + DDRB &= ~(1 << 7); + PORTB &= ~(1 << 7); } + return false; } diff --git a/keyboards/gh80_3000/keymaps/ansi_wkl/keymap.c b/keyboards/gh80_3000/keymaps/ansi_wkl/keymap.c index 28a34c4269..b3f2426e88 100644 --- a/keyboards/gh80_3000/keymaps/ansi_wkl/keymap.c +++ b/keyboards/gh80_3000/keymaps/ansi_wkl/keymap.c @@ -12,23 +12,29 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { ) }; -void led_set_user(uint8_t usb_led) { +bool led_update_user(led_t led_state) { + if (led_state.num_lock) { + DDRB |= (1 << 5); + PORTB &= ~(1 << 5); + } else { + DDRB &= ~(1 << 5); + PORTB &= ~(1 << 5); + } - if (usb_led & (1 << USB_LED_NUM_LOCK)) { - DDRB |= (1 << 5); PORTB &= ~(1 << 5); - } else { - DDRB &= ~(1 << 5); PORTB &= ~(1 << 5); - } + if (led_state.caps_lock) { + DDRB |= (1 << 6); + PORTB &= ~(1 << 6); + } else { + DDRB &= ~(1 << 6); + PORTB &= ~(1 << 6); + } - if (usb_led & (1 << USB_LED_CAPS_LOCK)) { - DDRB |= (1 << 6); PORTB &= ~(1 << 6); - } else { - DDRB &= ~(1 << 6); PORTB &= ~(1 << 6); - } - - if (usb_led & (1 << USB_LED_SCROLL_LOCK)) { - DDRB |= (1 << 7); PORTB &= ~(1 << 7); - } else { - DDRB &= ~(1 << 7); PORTB &= ~(1 << 7); - } + if (led_state.scroll_lock) { + DDRB |= (1 << 7); + PORTB &= ~(1 << 7); + } else { + DDRB &= ~(1 << 7); + PORTB &= ~(1 << 7); + } + return false; } diff --git a/keyboards/gh80_3000/keymaps/default/keymap.c b/keyboards/gh80_3000/keymaps/default/keymap.c index 264f20fbca..b74127fc5e 100644 --- a/keyboards/gh80_3000/keymaps/default/keymap.c +++ b/keyboards/gh80_3000/keymaps/default/keymap.c @@ -12,23 +12,29 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { ) }; -void led_set_user(uint8_t usb_led) { - - if (usb_led & (1 << USB_LED_NUM_LOCK)) { - DDRB |= (1 << 5); PORTB &= ~(1 << 5); +bool led_update_user(led_t led_state) { + if (led_state.num_lock) { + DDRB |= (1 << 5); + PORTB &= ~(1 << 5); } else { - DDRB &= ~(1 << 5); PORTB &= ~(1 << 5); + DDRB &= ~(1 << 5); + PORTB &= ~(1 << 5); } - if (usb_led & (1 << USB_LED_CAPS_LOCK)) { - DDRB |= (1 << 6); PORTB &= ~(1 << 6); + if (led_state.caps_lock) { + DDRB |= (1 << 6); + PORTB &= ~(1 << 6); } else { - DDRB &= ~(1 << 6); PORTB &= ~(1 << 6); + DDRB &= ~(1 << 6); + PORTB &= ~(1 << 6); } - if (usb_led & (1 << USB_LED_SCROLL_LOCK)) { - DDRB |= (1 << 7); PORTB &= ~(1 << 7); + if (led_state.scroll_lock) { + DDRB |= (1 << 7); + PORTB &= ~(1 << 7); } else { - DDRB &= ~(1 << 7); PORTB &= ~(1 << 7); + DDRB &= ~(1 << 7); + PORTB &= ~(1 << 7); } + return false; } diff --git a/keyboards/gh80_3000/keymaps/iso_default/keymap.c b/keyboards/gh80_3000/keymaps/iso_default/keymap.c index 137a6513b6..4c4b10f458 100644 --- a/keyboards/gh80_3000/keymaps/iso_default/keymap.c +++ b/keyboards/gh80_3000/keymaps/iso_default/keymap.c @@ -12,23 +12,29 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { ) }; -void led_set_user(uint8_t usb_led) { - - if (usb_led & (1 << USB_LED_NUM_LOCK)) { - DDRB |= (1 << 5); PORTB &= ~(1 << 5); +bool led_update_user(led_t led_state) { + if (led_state.num_lock) { + DDRB |= (1 << 5); + PORTB &= ~(1 << 5); } else { - DDRB &= ~(1 << 5); PORTB &= ~(1 << 5); + DDRB &= ~(1 << 5); + PORTB &= ~(1 << 5); } - if (usb_led & (1 << USB_LED_CAPS_LOCK)) { - DDRB |= (1 << 6); PORTB &= ~(1 << 6); + if (led_state.caps_lock) { + DDRB |= (1 << 6); + PORTB &= ~(1 << 6); } else { - DDRB &= ~(1 << 6); PORTB &= ~(1 << 6); + DDRB &= ~(1 << 6); + PORTB &= ~(1 << 6); } - if (usb_led & (1 << USB_LED_SCROLL_LOCK)) { - DDRB |= (1 << 7); PORTB &= ~(1 << 7); + if (led_state.scroll_lock) { + DDRB |= (1 << 7); + PORTB &= ~(1 << 7); } else { - DDRB &= ~(1 << 7); PORTB &= ~(1 << 7); + DDRB &= ~(1 << 7); + PORTB &= ~(1 << 7); } + return false; } diff --git a/keyboards/gh80_3000/keymaps/iso_std/keymap.c b/keyboards/gh80_3000/keymaps/iso_std/keymap.c index 434abf68f5..9559bde119 100644 --- a/keyboards/gh80_3000/keymaps/iso_std/keymap.c +++ b/keyboards/gh80_3000/keymaps/iso_std/keymap.c @@ -12,23 +12,29 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { ) }; -void led_set_user(uint8_t usb_led) { +bool led_update_user(led_t led_state) { + if (led_state.num_lock) { + DDRB |= (1 << 5); + PORTB &= ~(1 << 5); + } else { + DDRB &= ~(1 << 5); + PORTB &= ~(1 << 5); + } - if (usb_led & (1 << USB_LED_NUM_LOCK)) { - DDRB |= (1 << 5); PORTB &= ~(1 << 5); - } else { - DDRB &= ~(1 << 5); PORTB &= ~(1 << 5); - } + if (led_state.caps_lock) { + DDRB |= (1 << 6); + PORTB &= ~(1 << 6); + } else { + DDRB &= ~(1 << 6); + PORTB &= ~(1 << 6); + } - if (usb_led & (1 << USB_LED_CAPS_LOCK)) { - DDRB |= (1 << 6); PORTB &= ~(1 << 6); - } else { - DDRB &= ~(1 << 6); PORTB &= ~(1 << 6); - } - - if (usb_led & (1 << USB_LED_SCROLL_LOCK)) { - DDRB |= (1 << 7); PORTB &= ~(1 << 7); - } else { - DDRB &= ~(1 << 7); PORTB &= ~(1 << 7); - } + if (led_state.scroll_lock) { + DDRB |= (1 << 7); + PORTB &= ~(1 << 7); + } else { + DDRB &= ~(1 << 7); + PORTB &= ~(1 << 7); + } + return false; } diff --git a/keyboards/gh80_3000/keymaps/iso_wkl/keymap.c b/keyboards/gh80_3000/keymaps/iso_wkl/keymap.c index f275a3e789..86054ba1fd 100644 --- a/keyboards/gh80_3000/keymaps/iso_wkl/keymap.c +++ b/keyboards/gh80_3000/keymaps/iso_wkl/keymap.c @@ -12,23 +12,29 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { ) }; -void led_set_user(uint8_t usb_led) { +bool led_update_user(led_t led_state) { + if (led_state.num_lock) { + DDRB |= (1 << 5); + PORTB &= ~(1 << 5); + } else { + DDRB &= ~(1 << 5); + PORTB &= ~(1 << 5); + } - if (usb_led & (1 << USB_LED_NUM_LOCK)) { - DDRB |= (1 << 5); PORTB &= ~(1 << 5); - } else { - DDRB &= ~(1 << 5); PORTB &= ~(1 << 5); - } + if (led_state.caps_lock) { + DDRB |= (1 << 6); + PORTB &= ~(1 << 6); + } else { + DDRB &= ~(1 << 6); + PORTB &= ~(1 << 6); + } - if (usb_led & (1 << USB_LED_CAPS_LOCK)) { - DDRB |= (1 << 6); PORTB &= ~(1 << 6); - } else { - DDRB &= ~(1 << 6); PORTB &= ~(1 << 6); - } - - if (usb_led & (1 << USB_LED_SCROLL_LOCK)) { - DDRB |= (1 << 7); PORTB &= ~(1 << 7); - } else { - DDRB &= ~(1 << 7); PORTB &= ~(1 << 7); - } + if (led_state.scroll_lock) { + DDRB |= (1 << 7); + PORTB &= ~(1 << 7); + } else { + DDRB &= ~(1 << 7); + PORTB &= ~(1 << 7); + } + return false; } diff --git a/keyboards/ghs/rar/config.h b/keyboards/ghs/rar/config.h index 9cd6e7be5a..4156d04e55 100644 --- a/keyboards/ghs/rar/config.h +++ b/keyboards/ghs/rar/config.h @@ -17,7 +17,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #pragma once - #define RGBLED_NUM 17 # define RGBLIGHT_EFFECT_BREATHING # define RGBLIGHT_EFFECT_RAINBOW_MOOD # define RGBLIGHT_EFFECT_RAINBOW_SWIRL diff --git a/keyboards/ghs/rar/info.json b/keyboards/ghs/rar/info.json index 9a684c2840..f51efa5105 100644 --- a/keyboards/ghs/rar/info.json +++ b/keyboards/ghs/rar/info.json @@ -8,6 +8,9 @@ "pid": "0x0001", "device_version": "0.0.1" }, + "rgblight": { + "led_count": 17 + }, "ws2812": { "pin": "D0" }, diff --git a/keyboards/ghs/xls/rules.mk b/keyboards/ghs/xls/rules.mk index a92b099328..8b13789179 100644 --- a/keyboards/ghs/xls/rules.mk +++ b/keyboards/ghs/xls/rules.mk @@ -1,2 +1 @@ -# Enter lower-power sleep mode when on the ChibiOS idle thread -OPT_DEFS += -DCORTEX_ENABLE_WFI_IDLE=TRUE + diff --git a/keyboards/giabalanai/config.h b/keyboards/giabalanai/config.h index aa0095aebd..10e34a4cbb 100644 --- a/keyboards/giabalanai/config.h +++ b/keyboards/giabalanai/config.h @@ -34,40 +34,11 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #define SPLIT_USB_DETECT #ifdef RGBLIGHT_ENABLE -# define RGBLED_NUM 123 - -// Do not define "RGBLED_SPLIT" since somehow it doesn't work well yet. -// Even thhough "#define RGBLED_SPLIT { 60, 63 }" was set, LEDs on the sub keyboad side didn't turn on. -// Not sure but rgblight_sethsv_at() might not support RGBLED_SPLIT yet. -// Instead, LED data is tranferred from right side to the left via TRRS cable. - # define RGBLIGHT_LAYERS // By default, LEDs of the buttons which are pressed turn on. // # define RGBLIGHT_EFFECT_TWINKLE // # define RGBLIGHT_EFFECT_KNIGHT - - -// RGBLIGHT LED MAP -// Right 1st row (12 LEDs) -// ENCODER -// Right 2nd .. 5th row(13, 12, 13, 12 LEDs) -// Left 1st .. 5th row (12 LEDs x 5 rows) - -# define RGBLIGHT_LED_MAP { \ - 60, 61, 62, 63, 64, 65, 66, 67, 68, 69, 70, 71, \ - 97, \ - 84, 83, 82, 81, 80, 79, 78, 77, 76, 75, 74, 73, 72, \ - 85, 86, 87, 88, 89, 90, 91, 92, 93, 94, 95, 96, \ - 110, 109, 108, 107, 106, 105, 104, 103, 102, 101, 100, 99, 98, \ - 111, 112, 113, 114, 115, 116, 117, 118, 119, 120, 121, 122, \ - \ - 11, 10, 9, 8, 7, 6, 5, 4, 3, 2, 1, 0, \ - 12, 13, 14, 15, 16, 17, 18, 19, 20, 21, 22, 23, \ - 35, 34, 33, 32, 31, 30, 29, 28, 27, 26, 25, 24, \ - 36, 37, 38, 39, 40, 41, 42, 43, 44, 45, 46, 47, \ - 59, 58, 57, 56, 55, 54, 53, 52, 51, 50, 49, 48 \ - } #endif #ifdef RGB_MATRIX_ENABLE @@ -197,8 +168,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. # define MIDI_INITIAL_VELOCITY 117 #endif // MIDI_ENABLE -#define TAP_CODE_DELAY 10 - /* 2021/01/22 added to shrink firmware size */ // NO_ACTION_TAPPING -1964 bytes, however, this disables Layer mods... // #define NO_ACTION_TAPPING diff --git a/keyboards/giabalanai/info.json b/keyboards/giabalanai/info.json index 7c2fa72047..44482a2c0c 100644 --- a/keyboards/giabalanai/info.json +++ b/keyboards/giabalanai/info.json @@ -12,7 +12,9 @@ "driver": "WS2812" }, "rgblight": { - "max_brightness": 80 + "led_count": 123, + "max_brightness": 80, + "led_map": [60, 61, 62, 63, 64, 65, 66, 67, 68, 69, 70, 71, 97, 84, 83, 82, 81, 80, 79, 78, 77, 76, 75, 74, 73, 72, 85, 86, 87, 88, 89, 90, 91, 92, 93, 94, 95, 96, 110, 109, 108, 107, 106, 105, 104, 103, 102, 101, 100, 99, 98, 111, 112, 113, 114, 115, 116, 117, 118, 119, 120, 121, 122, 11, 10, 9, 8, 7, 6, 5, 4, 3, 2, 1, 0, 12, 13, 14, 15, 16, 17, 18, 19, 20, 21, 22, 23, 35, 34, 33, 32, 31, 30, 29, 28, 27, 26, 25, 24, 36, 37, 38, 39, 40, 41, 42, 43, 44, 45, 46, 47, 59, 58, 57, 56, 55, 54, 53, 52, 51, 50, 49, 48] }, "matrix_pins": { "cols": ["B1", "F7", "F6", "F5", "F4", "B3", "B2", "B6", "D0", "D1"], @@ -53,6 +55,9 @@ } } }, + "qmk": { + "tap_keycode_delay": 10 + }, "processor": "atmega32u4", "bootloader": "caterina", "layouts": { diff --git a/keyboards/giabalanai/keymaps/2firmware/keymap.c b/keyboards/giabalanai/keymaps/2firmware/keymap.c index 8e95b89a91..338d5d8e0f 100644 --- a/keyboards/giabalanai/keymaps/2firmware/keymap.c +++ b/keyboards/giabalanai/keymaps/2firmware/keymap.c @@ -332,9 +332,9 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, - MI_OCN2, MI_OCN1, MI_OC0, MI_OC1, MI_OC2, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, VERSION, EE_CLR, _______, + MI_OCN2, MI_OCN1, MI_OC0, MI_OC1, MI_OC2, XXXXXXX, XXXXXXX, MI_OCTD, MI_OCTU, XXXXXXX, VERSION, EE_CLR, _______, CSYSTEM, BSYSTEM, CNTBASC, CSYSALL, CHRTONE, CFLIP2B, XXXXXXX, XXXXXXX, XXXXXXX, MI_VELD, MI_VELU, XXXXXXX, RGB_TOG, - XXXXXXX, TGLBASS, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, TGLUVEL, MELDYAL, MELODYS, MELDYAH + XXXXXXX, TGLBASS, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, MI_TRSD, MI_TRSU, TGLUVEL, MELDYAL, MELODYS, MELDYAH ) }; diff --git a/keyboards/giabalanai/keymaps/3araht/keymap.c b/keyboards/giabalanai/keymaps/3araht/keymap.c index daa31ffa7b..fb68c02c70 100644 --- a/keyboards/giabalanai/keymaps/3araht/keymap.c +++ b/keyboards/giabalanai/keymaps/3araht/keymap.c @@ -363,9 +363,9 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, - MI_OCN2, MI_OCN1, MI_OC0, MI_OC1, MI_OC2, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, VERSION, EE_CLR, _______, + MI_OCN2, MI_OCN1, MI_OC0, MI_OC1, MI_OC2, XXXXXXX, XXXXXXX, MI_OCTD, MI_OCTU, XXXXXXX, VERSION, EE_CLR, _______, CSYSTEM, BSYSTEM, CNTBASC, CSYSALL, CHRTONE, CFLIP2B, CSYSFBS, CNTBASB, XXXXXXX, MI_VELD, MI_VELU, XXXXXXX, RGB_TOG, - XXXXXXX, TGLBASS, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, TGLUVEL, MELDYAL, MELODYS, MELDYAH + XXXXXXX, TGLBASS, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, MI_TRSD, MI_TRSU, TGLUVEL, MELDYAL, MELODYS, MELDYAH ) }; diff --git a/keyboards/giabalanai/keymaps/party/keymap.c b/keyboards/giabalanai/keymaps/party/keymap.c index ea3000c010..e4ff336930 100644 --- a/keyboards/giabalanai/keymaps/party/keymap.c +++ b/keyboards/giabalanai/keymaps/party/keymap.c @@ -363,9 +363,9 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, - MI_OCN2, MI_OCN1, MI_OC0, MI_OC1, MI_OC2, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, VERSION, EE_CLR, _______, + MI_OCN2, MI_OCN1, MI_OC0, MI_OC1, MI_OC2, XXXXXXX, XXXXXXX, MI_OCTD, MI_OCTU, XXXXXXX, VERSION, EE_CLR, _______, CSYSTEM, BSYSTEM, CNTBASC, CSYSALL, CHRTONE, CFLIP2B, CSYSFBS, CNTBASB, XXXXXXX, MI_VELD, MI_VELU, RGB_MOD, RGB_TOG, - XXXXXXX, TGLBASS, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, TGLUVEL, MELDYAL, MELODYS, MELDYAH + XXXXXXX, TGLBASS, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, MI_TRSD, MI_TRSU, TGLUVEL, MELDYAL, MELODYS, MELDYAH ) }; diff --git a/keyboards/gkeyboard/gkb_m16/config.h b/keyboards/gkeyboard/gkb_m16/config.h index 1f278e6e31..686937e573 100644 --- a/keyboards/gkeyboard/gkb_m16/config.h +++ b/keyboards/gkeyboard/gkb_m16/config.h @@ -17,11 +17,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #pragma once - #define RGBLED_NUM 4 - #define RGBLIGHT_HUE_STEP 8 - #define RGBLIGHT_SAT_STEP 8 - #define RGBLIGHT_VAL_STEP 8 - #define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */ #define RGBLIGHT_EFFECT_BREATHING #define RGBLIGHT_EFFECT_RAINBOW_MOOD #define RGBLIGHT_EFFECT_RAINBOW_SWIRL diff --git a/keyboards/gkeyboard/gkb_m16/info.json b/keyboards/gkeyboard/gkb_m16/info.json index ebf5ee8845..589ab4d853 100644 --- a/keyboards/gkeyboard/gkb_m16/info.json +++ b/keyboards/gkeyboard/gkb_m16/info.json @@ -8,6 +8,12 @@ "pid": "0x4201", "device_version": "0.0.1" }, + "rgblight": { + "saturation_steps": 8, + "brightness_steps": 8, + "led_count": 4, + "sleep": true + }, "ws2812": { "pin": "F1" }, diff --git a/keyboards/gl516/j73gl/config.h b/keyboards/gl516/j73gl/config.h index 49205e59d1..7adc4e10c3 100644 --- a/keyboards/gl516/j73gl/config.h +++ b/keyboards/gl516/j73gl/config.h @@ -31,10 +31,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. /* Locking resynchronize hack */ #define LOCKING_RESYNC_ENABLE -#ifndef RGBLED_NUM - #define RGBLED_NUM 73 -#endif - #define RGBLIGHT_EFFECT_BREATHING #define RGBLIGHT_EFFECT_RAINBOW_MOOD #define RGBLIGHT_EFFECT_RAINBOW_SWIRL diff --git a/keyboards/gl516/j73gl/info.json b/keyboards/gl516/j73gl/info.json index a34c1e6c4c..2650356f1f 100644 --- a/keyboards/gl516/j73gl/info.json +++ b/keyboards/gl516/j73gl/info.json @@ -8,6 +8,9 @@ "pid": "0xE8D0", "device_version": "0.0.1" }, + "rgblight": { + "led_count": 73 + }, "ws2812": { "pin": "D3" }, diff --git a/keyboards/gl516/n51gl/config.h b/keyboards/gl516/n51gl/config.h index cd919a72c4..138e9d1063 100644 --- a/keyboards/gl516/n51gl/config.h +++ b/keyboards/gl516/n51gl/config.h @@ -31,10 +31,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. /* Locking resynchronize hack */ #define LOCKING_RESYNC_ENABLE -#ifndef RGBLED_NUM - #define RGBLED_NUM 15 -#endif - #define RGBLIGHT_EFFECT_BREATHING #define RGBLIGHT_EFFECT_RAINBOW_MOOD #define RGBLIGHT_EFFECT_RAINBOW_SWIRL diff --git a/keyboards/gl516/n51gl/info.json b/keyboards/gl516/n51gl/info.json index 9da8930c60..180a2b4c75 100644 --- a/keyboards/gl516/n51gl/info.json +++ b/keyboards/gl516/n51gl/info.json @@ -8,6 +8,9 @@ "pid": "0xE8CF", "device_version": "0.0.1" }, + "rgblight": { + "led_count": 15 + }, "ws2812": { "pin": "D3" }, @@ -83,64 +86,6 @@ {"matrix": [7, 5], "x": 14.75, "y": 3}, {"matrix": [7, 6], "x": 15.75, "y": 3} ] - }, - "LAYOUT_rotary_layer": { - "layout": [ - {"matrix": [0, 0], "x": 0, "y": 0}, - {"matrix": [0, 1], "x": 1, "y": 0}, - {"matrix": [0, 2], "x": 2, "y": 0}, - {"matrix": [0, 3], "x": 3, "y": 0}, - {"matrix": [0, 4], "x": 4, "y": 0}, - {"matrix": [0, 5], "x": 5, "y": 0}, - {"matrix": [0, 6], "x": 6, "y": 0}, - {"matrix": [4, 0], "x": 7, "y": 0}, - {"matrix": [4, 1], "x": 8, "y": 0}, - {"matrix": [4, 2], "x": 9, "y": 0}, - {"matrix": [4, 3], "x": 10, "y": 0}, - {"matrix": [4, 4], "x": 11, "y": 0}, - {"matrix": [4, 5], "x": 12, "y": 0}, - {"matrix": [4, 6], "x": 13, "y": 0}, - {"matrix": [1, 1], "x": 14, "y": 0}, - {"matrix": [1, 2], "x": 15, "y": 0}, - {"matrix": [1, 3], "x": 16, "y": 0}, - {"matrix": [1, 4], "x": 17, "y": 0}, - {"matrix": [1, 5], "x": 18, "y": 0}, - {"matrix": [1, 6], "x": 19, "y": 0}, - {"matrix": [1, 0], "x": 20, "y": 0}, - {"matrix": [5, 0], "x": 21, "y": 0}, - {"matrix": [5, 1], "x": 22, "y": 0}, - {"matrix": [5, 2], "x": 23, "y": 0}, - {"matrix": [5, 3], "x": 24, "y": 0}, - {"matrix": [5, 4], "x": 25, "y": 0}, - {"matrix": [5, 5], "x": 26, "y": 0}, - {"matrix": [5, 6], "x": 27, "y": 0}, - {"matrix": [2, 1], "x": 28, "y": 0}, - {"matrix": [2, 2], "x": 29, "y": 0}, - {"matrix": [2, 3], "x": 30, "y": 0}, - {"matrix": [2, 4], "x": 31, "y": 0}, - {"matrix": [2, 5], "x": 32, "y": 0}, - {"matrix": [2, 6], "x": 33, "y": 0}, - {"matrix": [2, 0], "x": 34, "y": 0}, - {"matrix": [6, 0], "x": 35, "y": 0}, - {"matrix": [6, 1], "x": 36, "y": 0}, - {"matrix": [6, 2], "x": 37, "y": 0}, - {"matrix": [6, 3], "x": 38, "y": 0}, - {"matrix": [6, 4], "x": 39, "y": 0}, - {"matrix": [6, 5], "x": 40, "y": 0}, - {"matrix": [6, 6], "x": 41, "y": 0}, - {"matrix": [3, 1], "x": 42, "y": 0}, - {"matrix": [3, 2], "x": 43, "y": 0}, - {"matrix": [3, 4], "x": 44, "y": 0}, - {"matrix": [3, 5], "x": 45, "y": 0}, - {"matrix": [3, 6], "x": 46, "y": 0}, - {"matrix": [3, 0], "x": 47, "y": 0}, - {"matrix": [7, 0], "x": 48, "y": 0}, - {"matrix": [7, 1], "x": 49, "y": 0}, - {"matrix": [7, 2], "x": 50, "y": 0}, - {"matrix": [7, 4], "x": 51, "y": 0}, - {"matrix": [7, 5], "x": 52, "y": 0}, - {"matrix": [7, 6], "x": 53, "y": 0} - ] } } } diff --git a/keyboards/gl516/n51gl/keymaps/salicylic/config.h b/keyboards/gl516/n51gl/keymaps/salicylic/config.h deleted file mode 100644 index 0e221d844d..0000000000 --- a/keyboards/gl516/n51gl/keymaps/salicylic/config.h +++ /dev/null @@ -1,22 +0,0 @@ -/* Copyright 2021 Salicylic_acid3 - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see <http://www.gnu.org/licenses/>. - */ - -#pragma once - -/* Select hand configuration */ - -#define QUICK_TAP_TERM 0 -#define TAPPING_TERM 180 diff --git a/keyboards/gl516/n51gl/keymaps/salicylic/keymap.c b/keyboards/gl516/n51gl/keymaps/salicylic/keymap.c deleted file mode 100644 index 81f7b8665f..0000000000 --- a/keyboards/gl516/n51gl/keymaps/salicylic/keymap.c +++ /dev/null @@ -1,117 +0,0 @@ -/* -Copyright 2021 Salicylic_Acid - -This program is free software: you can redistribute it and/or modify -it under the terms of the GNU General Public License as published by -the Free Software Foundation, either version 2 of the License, or -(at your option) any later version. - -This program is distributed in the hope that it will be useful, -but WITHOUT ANY WARRANTY; without even the implied warranty of -MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -GNU General Public License for more details. - -You should have received a copy of the GNU General Public License -along with this program. If not, see <http://www.gnu.org/licenses/>. -*/ - -#include QMK_KEYBOARD_H -#include "keymap_japanese.h" - - -// Each layer gets a name for readability, which is then used in the keymap matrix below. -// The underscores don't mean anything - you can have a layer called STUFF or any other name. -// Layer names don't all need to be of the same length, obviously, and you can also skip them -// entirely and just use numbers. -enum layer_number { - _QWERTY = 0, - _LOWER, - _RAISE, - _ADJUST, -}; - -const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { - [_QWERTY] = LAYOUT_rotary_layer( - //,--------------------------------------------------------------| |--------------------------------------------------------------. - KC_ESC, KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_BSPC, - //|--------+--------+--------+--------+--------+--------+--------| |--------+--------+--------+--------+--------+--------+--------| - KC_LCTL, KC_A, KC_S, KC_D, KC_F, KC_G, KC_VOLU, KC_H, KC_J, KC_K, KC_L, JP_MINS, JP_BSLS, KC_ENT, - //|--------+--------+--------+--------+--------+--------+--------| |--------+--------+--------+--------+--------+--------+--------| - KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_MUTE, KC_N, KC_M, KC_COMM, KC_DOT, JP_SLSH, KC_UP, KC_RSFT, - //|--------+--------+--------+--------+--------+--------+--------| |--------+--------+--------+--------+--------+--------+--------| - JP_ZKHK, KC_LALT,LGUI_T(JP_MHEN),LT(_LOWER,KC_ENT),KC_BSPC, KC_VOLD, KC_DEL,LT(_RAISE,KC_SPC),ALT_T(JP_HENK),KC_LEFT, KC_DOWN, KC_RGHT - //|--------------------------------------------------------------| |--------------------------------------------------------------' - ), - [_LOWER] = LAYOUT_rotary_layer( - //,--------------------------------------------------------------| |--------------------------------------------------------------. - _______, _______, JP_EXLM, JP_QUES, JP_LBRC, JP_RBRC, JP_TILD, KC_6, KC_7, KC_8, KC_9, JP_ASTR, JP_SLSH, KC_BSPC, - //|--------+--------+--------+--------+--------+--------+--------| |--------+--------+--------+--------+--------+--------+--------| - JP_QUOT, JP_HASH, JP_DQT, JP_LPRN, JP_RPRN, JP_AT, KC_WH_U, XXXXXXX, KC_4, KC_5, KC_6, JP_MINS, JP_EQL, _______, - //|--------+--------+--------+--------+--------+--------+--------| |--------+--------+--------+--------+--------+--------+--------| - JP_CIRC, JP_PERC, JP_AMPR, JP_SCLN, JP_COLN, JP_PIPE, KC_BTN3, KC_0, KC_1, KC_2, KC_3, JP_PLUS, _______, _______, - //|--------+--------+--------+--------+--------+--------+--------| |--------+--------+--------+--------+--------+--------+--------| - _______, _______, JP_MHEN, MO(_LOWER), _______, KC_WH_D, _______, MO(_RAISE), JP_DOT, _______, _______, _______ - //|--------------------------------------------------------------| |--------------------------------------------------------------' - ), - - [_RAISE] = LAYOUT_rotary_layer( - //,--------------------------------------------------------------| |--------------------------------------------------------------. - _______, _______, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, XXXXXXX, KC_UP, XXXXXXX, KC_PGUP,LALT(KC_PSCR),KC_PSCR, - //|--------+--------+--------+--------+--------+--------+--------| |--------+--------+--------+--------+--------+--------+--------| - LCTL_T(KC_F11), KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_WH_L, XXXXXXX, KC_LEFT, KC_DOWN, KC_RGHT, XXXXXXX, XXXXXXX, _______, - //|--------+--------+--------+--------+--------+--------+--------| |--------+--------+--------+--------+--------+--------+--------| - KC_LSFT, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, _______, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, KC_PGDN, _______, _______, - //|--------+--------+--------+--------+--------+--------+--------| |--------+--------+--------+--------+--------+--------+--------| - _______, _______, _______, _______, _______, KC_WH_R, _______, _______, JP_HENK, _______, _______, _______ - //|--------------------------------------------------------------| |--------------------------------------------------------------' - ), - - [_ADJUST] = LAYOUT_rotary_layer( - //,--------------------------------------------------------------| |--------------------------------------------------------------. - QK_BOOT, KC_TAB, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX,LALT(KC_PSCR),KC_PSCR, - //|--------+--------+--------+--------+--------+--------+--------| |--------+--------+--------+--------+--------+--------+--------| - KC_LCTL, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, RGB_MOD, RGB_TOG, RGB_MOD, RGB_SAD, RGB_SAI, XXXXXXX, XXXXXXX, _______, - //|--------+--------+--------+--------+--------+--------+--------| |--------+--------+--------+--------+--------+--------+--------| - SFT_T(KC_F12), XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, RGB_TOG, RGB_VAD, RGB_VAI, RGB_HUD, RGB_HUI, XXXXXXX, _______, _______, - //|--------+--------+--------+--------+--------+--------+--------| |--------+--------+--------+--------+--------+--------+--------| - _______, _______, _______, _______, _______,RGB_RMOD, _______, _______, _______, _______, _______, _______ - //|--------------------------------------------------------------| |--------------------------------------------------------------' - ) -}; - -//A description for expressing the layer position in LED mode. -layer_state_t layer_state_set_user(layer_state_t state) { - state = update_tri_layer_state(state, _RAISE, _LOWER, _ADJUST); -#ifdef RGBLIGHT_ENABLE - switch (get_highest_layer(state)) { - case _LOWER: - rgblight_sethsv_at(HSV_BLUE, 0); - break; - case _RAISE: - rgblight_sethsv_at(HSV_RED, 0); - break; - case _ADJUST: - rgblight_sethsv_at(HSV_PURPLE, 0); - break; - default: // for any other layers, or the default layer - rgblight_sethsv_at( 0, 0, 0, 0); - break; - } - rgblight_set_effect_range( 1, 14); -#endif -return state; -} - -bool encoder_update_user(uint8_t index, bool clockwise) { - keypos_t key; - if (clockwise) { - key.row = 3; - key.col = 0; - } else { - key.row = 1; - key.col = 0; - } - action_exec(MAKE_KEYEVENT(key.row, key.col, true)); - action_exec(MAKE_KEYEVENT(key.row, key.col, false)); - return true; -} diff --git a/keyboards/gl516/n51gl/keymaps/via/keymap.c b/keyboards/gl516/n51gl/keymaps/via/keymap.c index cf1aa7d595..10980c6ad0 100644 --- a/keyboards/gl516/n51gl/keymaps/via/keymap.c +++ b/keyboards/gl516/n51gl/keymaps/via/keymap.c @@ -18,48 +18,48 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #include QMK_KEYBOARD_H const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { - [0] = LAYOUT_rotary_layer( + [0] = LAYOUT( //,--------------------------------------------------------------| |--------------------------------------------------------------. KC_ESC, KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_BSPC, //|--------+--------+--------+--------+--------+--------+--------| |--------+--------+--------+--------+--------+--------+--------| - LT(1,KC_CAPS), KC_A, KC_S, KC_D, KC_F, KC_G, KC_VOLU, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, + LT(1,KC_CAPS), KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, //|--------+--------+--------+--------+--------+--------+--------| |--------+--------+--------+--------+--------+--------+--------| KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_MUTE, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_UP, KC_RSFT, //|--------+--------+--------+--------+--------+--------+--------| |--------+--------+--------+--------+--------+--------+--------| - KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_SPC, KC_VOLD, KC_SPC, KC_SPC, KC_LALT, KC_LEFT, KC_DOWN, KC_RGHT + KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_SPC, KC_SPC, KC_SPC, KC_LALT, KC_LEFT, KC_DOWN, KC_RGHT //|--------------------------------------------------------------| |--------------------------------------------------------------' ), - [1] = LAYOUT_rotary_layer( + [1] = LAYOUT( //,--------------------------------------------------------------| |--------------------------------------------------------------. _______, QK_BOOT, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, //|--------+--------+--------+--------+--------+--------+--------| |--------+--------+--------+--------+--------+--------+--------| - _______, KC_1, KC_2, KC_3, KC_4, KC_5, _______, KC_6, KC_7, KC_8, KC_9, KC_0, _______, _______, + _______, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, _______, _______, //|--------+--------+--------+--------+--------+--------+--------| |--------+--------+--------+--------+--------+--------+--------| _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, //|--------+--------+--------+--------+--------+--------+--------| |--------+--------+--------+--------+--------+--------+--------| - _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______ + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______ //|--------------------------------------------------------------| |--------------------------------------------------------------' ), - [2] = LAYOUT_rotary_layer( + [2] = LAYOUT( //,--------------------------------------------------------------| |--------------------------------------------------------------. XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, //|--------+--------+--------+--------+--------+--------+--------| |--------+--------+--------+--------+--------+--------+--------| - XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, + XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, //|--------+--------+--------+--------+--------+--------+--------| |--------+--------+--------+--------+--------+--------+--------| XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, //|--------+--------+--------+--------+--------+--------+--------| |--------+--------+--------+--------+--------+--------+--------| - XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX + XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX //|--------------------------------------------------------------| |--------------------------------------------------------------' ), - [3] = LAYOUT_rotary_layer( + [3] = LAYOUT( //,--------------------------------------------------------------| |--------------------------------------------------------------. XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, //|--------+--------+--------+--------+--------+--------+--------| |--------+--------+--------+--------+--------+--------+--------| - XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, + XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, //|--------+--------+--------+--------+--------+--------+--------| |--------+--------+--------+--------+--------+--------+--------| XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, //|--------+--------+--------+--------+--------+--------+--------| |--------+--------+--------+--------+--------+--------+--------| - XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX + XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX //|--------------------------------------------------------------| |--------------------------------------------------------------' ) }; @@ -87,16 +87,11 @@ layer_state_t layer_state_set_user(layer_state_t state) { return state; } -bool encoder_update_user(uint8_t index, bool clockwise) { - keypos_t key; - if (clockwise) { - key.row = 3; - key.col = 0; - } else { - key.row = 1; - key.col = 0; - } - action_exec(MAKE_KEYEVENT(key.row, key.col, true)); - action_exec(MAKE_KEYEVENT(key.row, key.col, false)); - return true; -} +#ifdef ENCODER_MAP_ENABLE +const uint16_t PROGMEM encoder_map[][NUM_ENCODERS][NUM_DIRECTIONS] = { + [0] = { ENCODER_CCW_CW(KC_VOLD, KC_VOLU) }, + [1] = { ENCODER_CCW_CW(_______, _______) }, + [2] = { ENCODER_CCW_CW(_______, _______) }, + [3] = { ENCODER_CCW_CW(_______, _______) }, +}; +#endif diff --git a/keyboards/gl516/n51gl/keymaps/via/rules.mk b/keyboards/gl516/n51gl/keymaps/via/rules.mk index 036bd6d1c3..f1adcab005 100644 --- a/keyboards/gl516/n51gl/keymaps/via/rules.mk +++ b/keyboards/gl516/n51gl/keymaps/via/rules.mk @@ -1 +1,2 @@ -VIA_ENABLE = yes
\ No newline at end of file +VIA_ENABLE = yes +ENCODER_MAP_ENABLE = yes diff --git a/keyboards/gmmk/gmmk2/p65/ansi/info.json b/keyboards/gmmk/gmmk2/p65/ansi/info.json index c22fe89f58..f4a9b92312 100644 --- a/keyboards/gmmk/gmmk2/p65/ansi/info.json +++ b/keyboards/gmmk/gmmk2/p65/ansi/info.json @@ -8,6 +8,9 @@ "pid": "0x5045", "device_version": "0.0.1" }, + "qmk": { + "tap_keycode_delay": 10 + }, "rgb_matrix": { "driver": "AW20216" }, diff --git a/keyboards/gmmk/gmmk2/p65/config.h b/keyboards/gmmk/gmmk2/p65/config.h index 64febeb948..3c6a2fd906 100644 --- a/keyboards/gmmk/gmmk2/p65/config.h +++ b/keyboards/gmmk/gmmk2/p65/config.h @@ -16,8 +16,6 @@ #pragma once -#define TAP_CODE_DELAY 10 - /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ #define LOCKING_SUPPORT_ENABLE /* Locking resynchronize hack */ diff --git a/keyboards/gmmk/gmmk2/p65/iso/info.json b/keyboards/gmmk/gmmk2/p65/iso/info.json index de078864ce..c036ffa306 100644 --- a/keyboards/gmmk/gmmk2/p65/iso/info.json +++ b/keyboards/gmmk/gmmk2/p65/iso/info.json @@ -8,6 +8,9 @@ "pid": "0x504A", "device_version": "0.0.1" }, + "qmk": { + "tap_keycode_delay": 10 + }, "rgb_matrix": { "driver": "AW20216" }, diff --git a/keyboards/gmmk/gmmk2/p96/ansi/info.json b/keyboards/gmmk/gmmk2/p96/ansi/info.json index 482e52f504..3b5caf5d54 100644 --- a/keyboards/gmmk/gmmk2/p96/ansi/info.json +++ b/keyboards/gmmk/gmmk2/p96/ansi/info.json @@ -8,6 +8,9 @@ "pid": "0x504B", "device_version": "0.0.1" }, + "qmk": { + "tap_keycode_delay": 10 + }, "rgb_matrix": { "driver": "AW20216" }, diff --git a/keyboards/gmmk/gmmk2/p96/config.h b/keyboards/gmmk/gmmk2/p96/config.h index 16aae9b330..e3b5cdcfa1 100644 --- a/keyboards/gmmk/gmmk2/p96/config.h +++ b/keyboards/gmmk/gmmk2/p96/config.h @@ -16,8 +16,6 @@ #pragma once -#define TAP_CODE_DELAY 10 - /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ #define LOCKING_SUPPORT_ENABLE /* Locking resynchronize hack */ diff --git a/keyboards/gmmk/gmmk2/p96/iso/info.json b/keyboards/gmmk/gmmk2/p96/iso/info.json index de9eb07edc..dd747478d9 100644 --- a/keyboards/gmmk/gmmk2/p96/iso/info.json +++ b/keyboards/gmmk/gmmk2/p96/iso/info.json @@ -8,6 +8,9 @@ "pid": "0x505A", "device_version": "0.0.1" }, + "qmk": { + "tap_keycode_delay": 10 + }, "rgb_matrix": { "driver": "AW20216" }, diff --git a/keyboards/gmmk/pro/config.h b/keyboards/gmmk/pro/config.h index 8188418469..069823663e 100644 --- a/keyboards/gmmk/pro/config.h +++ b/keyboards/gmmk/pro/config.h @@ -16,8 +16,6 @@ #pragma once -#define TAP_CODE_DELAY 10 - /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ #define LOCKING_SUPPORT_ENABLE /* Locking resynchronize hack */ @@ -35,6 +33,8 @@ #define DRIVER_COUNT 2 +#define RGB_DISABLE_WHEN_USB_SUSPENDED + // RGB Matrix Animation modes. Explicitly enabled // For full list of effects, see: // https://docs.qmk.fm/#/feature_rgb_matrix?id=rgb-matrix-effects diff --git a/keyboards/gmmk/pro/rev1/ansi/info.json b/keyboards/gmmk/pro/rev1/ansi/info.json index 7a1532424b..80cab4dfe3 100644 --- a/keyboards/gmmk/pro/rev1/ansi/info.json +++ b/keyboards/gmmk/pro/rev1/ansi/info.json @@ -21,6 +21,9 @@ {"pin_a": "C15", "pin_b": "C14"} ] }, + "qmk": { + "tap_keycode_delay": 10 + }, "bootmagic": { "matrix": [1, 3] }, diff --git a/keyboards/gmmk/pro/rev1/iso/info.json b/keyboards/gmmk/pro/rev1/iso/info.json index 7b78ca5716..b1c17fe805 100644 --- a/keyboards/gmmk/pro/rev1/iso/info.json +++ b/keyboards/gmmk/pro/rev1/iso/info.json @@ -21,6 +21,9 @@ {"pin_a": "C15", "pin_b": "C14"} ] }, + "qmk": { + "tap_keycode_delay": 10 + }, "bootmagic": { "matrix": [1, 3] }, diff --git a/keyboards/gmmk/pro/rev2/ansi/info.json b/keyboards/gmmk/pro/rev2/ansi/info.json index ff693e3573..ae9086af43 100644 --- a/keyboards/gmmk/pro/rev2/ansi/info.json +++ b/keyboards/gmmk/pro/rev2/ansi/info.json @@ -21,6 +21,9 @@ {"pin_a": "C15", "pin_b": "C14"} ] }, + "qmk": { + "tap_keycode_delay": 10 + }, "bootmagic": { "matrix": [1, 3] }, diff --git a/keyboards/gmmk/pro/rev2/iso/info.json b/keyboards/gmmk/pro/rev2/iso/info.json index 972551ec41..b1b85b7af5 100644 --- a/keyboards/gmmk/pro/rev2/iso/info.json +++ b/keyboards/gmmk/pro/rev2/iso/info.json @@ -21,6 +21,9 @@ {"pin_a": "C15", "pin_b": "C14"} ] }, + "qmk": { + "tap_keycode_delay": 10 + }, "bootmagic": { "matrix": [1, 3] }, diff --git a/keyboards/gon/nerdtkl/keymaps/gam3cat/keymap.c b/keyboards/gon/nerdtkl/keymaps/gam3cat/keymap.c index d551f4cb50..065cf3eddc 100644 --- a/keyboards/gon/nerdtkl/keymaps/gam3cat/keymap.c +++ b/keyboards/gon/nerdtkl/keymaps/gam3cat/keymap.c @@ -236,10 +236,6 @@ void matrix_init_user(void) { #endif } -void matrix_scan_user(void) { - -} - layer_state_t layer_state_set_user(layer_state_t state) { switch (get_highest_layer(state)) { case _BL: @@ -263,7 +259,3 @@ layer_state_t layer_state_set_user(layer_state_t state) { } return state; } - -void led_set_user(uint8_t usb_led) { - -} diff --git a/keyboards/gray_studio/aero75/config.h b/keyboards/gray_studio/aero75/config.h index a55a587467..35b1ea56bb 100644 --- a/keyboards/gray_studio/aero75/config.h +++ b/keyboards/gray_studio/aero75/config.h @@ -5,11 +5,6 @@ #define RGBLIGHT_LAYERS #define RGBLIGHT_LAYERS_OVERRIDE_RGB_OFF -#define RGBLED_NUM 1 -#define RGBLIGHT_HUE_STEP 8 -#define RGBLIGHT_SAT_STEP 8 -#define RGBLIGHT_VAL_STEP 8 -#define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */ // /*== all animations enable ==*/ #define RGBLIGHT_EFFECT_BREATHING #define RGBLIGHT_EFFECT_RAINBOW_MOOD diff --git a/keyboards/gray_studio/aero75/info.json b/keyboards/gray_studio/aero75/info.json index e8a08e79e4..7219afb68a 100644 --- a/keyboards/gray_studio/aero75/info.json +++ b/keyboards/gray_studio/aero75/info.json @@ -12,7 +12,11 @@ "pin": "B10" }, "rgblight": { - "max_brightness": 200 + "saturation_steps": 8, + "brightness_steps": 8, + "led_count": 1, + "max_brightness": 200, + "sleep": true }, "matrix_pins": { "cols": ["A3", "A5", "A4", "B9", "B8", "B7", "B6", "B5", "B4", "B3", "A15", "B1", "A8", "B15", "B14", "B13"], diff --git a/keyboards/gray_studio/aero75/rules.mk b/keyboards/gray_studio/aero75/rules.mk index ecfd4b5b95..4a54444867 100644 --- a/keyboards/gray_studio/aero75/rules.mk +++ b/keyboards/gray_studio/aero75/rules.mk @@ -1,5 +1,3 @@ -# Enter lower-power sleep mode when on the ChibiOS idle thread -OPT_DEFS += -DCORTEX_ENABLE_WFI_IDLE=TRUE # Build Options # change yes to no to disable diff --git a/keyboards/gray_studio/apollo80/config.h b/keyboards/gray_studio/apollo80/config.h index 362574dea8..845978a434 100644 --- a/keyboards/gray_studio/apollo80/config.h +++ b/keyboards/gray_studio/apollo80/config.h @@ -16,12 +16,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #pragma once - #define RGBLED_NUM 22 - #define RGBLIGHT_HUE_STEP 8 - #define RGBLIGHT_SAT_STEP 8 - #define RGBLIGHT_VAL_STEP 8 - #define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */ - #define RGBLIGHT_DEFAULT_MODE RGBLIGHT_MODE_RAINBOW_MOOD /*== or choose animations ==*/ #define RGBLIGHT_EFFECT_BREATHING diff --git a/keyboards/gray_studio/apollo80/info.json b/keyboards/gray_studio/apollo80/info.json index 1dfa43bfe1..e0c60212f9 100644 --- a/keyboards/gray_studio/apollo80/info.json +++ b/keyboards/gray_studio/apollo80/info.json @@ -12,7 +12,11 @@ "pin": "E2" }, "rgblight": { - "max_brightness": 180 + "saturation_steps": 8, + "brightness_steps": 8, + "led_count": 22, + "max_brightness": 180, + "sleep": true }, "matrix_pins": { "cols": ["F0", "F1", "F4", "F5", "F6", "F7", "C7", "C6", "B6", "B5", "B4", "D7", "D4", "D6", "D2", "D3", "D5"], diff --git a/keyboards/gray_studio/cod67/config.h b/keyboards/gray_studio/cod67/config.h index 7a2d573aaf..ebb36d7fda 100644 --- a/keyboards/gray_studio/cod67/config.h +++ b/keyboards/gray_studio/cod67/config.h @@ -17,11 +17,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #pragma once - #define RGBLED_NUM 20 - #define RGBLIGHT_HUE_STEP 8 - #define RGBLIGHT_SAT_STEP 8 - #define RGBLIGHT_VAL_STEP 8 - #define RGBLIGHT_SLEEP #define RGBLIGHT_EFFECT_BREATHING #define RGBLIGHT_EFFECT_RAINBOW_MOOD #define RGBLIGHT_EFFECT_RAINBOW_SWIRL diff --git a/keyboards/gray_studio/cod67/info.json b/keyboards/gray_studio/cod67/info.json index fe6f1b1867..91b6668581 100644 --- a/keyboards/gray_studio/cod67/info.json +++ b/keyboards/gray_studio/cod67/info.json @@ -8,6 +8,12 @@ "pid": "0x1000", "device_version": "0.0.1" }, + "rgblight": { + "saturation_steps": 8, + "brightness_steps": 8, + "led_count": 20, + "sleep": true + }, "ws2812": { "pin": "B2" }, diff --git a/keyboards/gray_studio/hb85/config.h b/keyboards/gray_studio/hb85/config.h index 41df8a357d..d849732a07 100644 --- a/keyboards/gray_studio/hb85/config.h +++ b/keyboards/gray_studio/hb85/config.h @@ -17,7 +17,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #pragma once -#define RGBLED_NUM 5 #define RGBLIGHT_EFFECT_BREATHING #define RGBLIGHT_EFFECT_RAINBOW_MOOD #define RGBLIGHT_EFFECT_RAINBOW_SWIRL diff --git a/keyboards/gray_studio/hb85/info.json b/keyboards/gray_studio/hb85/info.json index 138b1bfe5c..c1d7533a7d 100644 --- a/keyboards/gray_studio/hb85/info.json +++ b/keyboards/gray_studio/hb85/info.json @@ -16,6 +16,9 @@ "backlight": { "pin": "D4" }, + "rgblight": { + "led_count": 5 + }, "ws2812": { "driver": "i2c" }, diff --git a/keyboards/gray_studio/space65/config.h b/keyboards/gray_studio/space65/config.h index b1c76459fc..c43ea48906 100644 --- a/keyboards/gray_studio/space65/config.h +++ b/keyboards/gray_studio/space65/config.h @@ -17,11 +17,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #pragma once - #define RGBLED_NUM 6 - #define RGBLIGHT_HUE_STEP 8 - #define RGBLIGHT_SAT_STEP 8 - #define RGBLIGHT_VAL_STEP 8 - #define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */ #define RGBLIGHT_EFFECT_BREATHING #define RGBLIGHT_EFFECT_RAINBOW_MOOD #define RGBLIGHT_EFFECT_RAINBOW_SWIRL diff --git a/keyboards/gray_studio/space65/info.json b/keyboards/gray_studio/space65/info.json index 8bcd90705a..73caa1571b 100644 --- a/keyboards/gray_studio/space65/info.json +++ b/keyboards/gray_studio/space65/info.json @@ -18,6 +18,12 @@ "levels": 5, "breathing": true }, + "rgblight": { + "saturation_steps": 8, + "brightness_steps": 8, + "led_count": 6, + "sleep": true + }, "ws2812": { "pin": "E2" }, diff --git a/keyboards/gray_studio/space65r3/config.h b/keyboards/gray_studio/space65r3/config.h index 88824052b2..17d533adfa 100644 --- a/keyboards/gray_studio/space65r3/config.h +++ b/keyboards/gray_studio/space65r3/config.h @@ -4,11 +4,6 @@ #define RGBLIGHT_LAYERS #define RGBLIGHT_LAYERS_OVERRIDE_RGB_OFF -#define RGBLED_NUM 5 -#define RGBLIGHT_HUE_STEP 8 -#define RGBLIGHT_SAT_STEP 8 -#define RGBLIGHT_VAL_STEP 8 -#define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */ // /*== all animations enable ==*/ #define RGBLIGHT_EFFECT_BREATHING #define RGBLIGHT_EFFECT_RAINBOW_MOOD diff --git a/keyboards/gray_studio/space65r3/info.json b/keyboards/gray_studio/space65r3/info.json index 7caa7cdd60..68cc6a449f 100644 --- a/keyboards/gray_studio/space65r3/info.json +++ b/keyboards/gray_studio/space65r3/info.json @@ -12,7 +12,11 @@ "pin": "B10" }, "rgblight": { - "max_brightness": 200 + "saturation_steps": 8, + "brightness_steps": 8, + "led_count": 5, + "max_brightness": 200, + "sleep": true }, "matrix_pins": { "cols": ["A3", "A5", "A4", "B9", "B8", "B7", "B6", "B5", "B4", "B3", "A15", "B0", "A8", "B15", "B14", "B13"], diff --git a/keyboards/gray_studio/space65r3/rules.mk b/keyboards/gray_studio/space65r3/rules.mk index 703a4ac4e1..edf9d72c6e 100644 --- a/keyboards/gray_studio/space65r3/rules.mk +++ b/keyboards/gray_studio/space65r3/rules.mk @@ -1,5 +1,3 @@ -# Enter lower-power sleep mode when on the ChibiOS idle thread -OPT_DEFS += -DCORTEX_ENABLE_WFI_IDLE=TRUE # Build Options # change yes to no to disable diff --git a/keyboards/gray_studio/think65/hotswap/config.h b/keyboards/gray_studio/think65/hotswap/config.h index 7a2cc1f03c..314f467400 100644 --- a/keyboards/gray_studio/think65/hotswap/config.h +++ b/keyboards/gray_studio/think65/hotswap/config.h @@ -17,11 +17,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #pragma once - #define RGBLED_NUM 22 - #define RGBLIGHT_HUE_STEP 8 - #define RGBLIGHT_SAT_STEP 8 - #define RGBLIGHT_VAL_STEP 8 - #define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */ #define RGBLIGHT_EFFECT_BREATHING #define RGBLIGHT_EFFECT_RAINBOW_MOOD #define RGBLIGHT_EFFECT_RAINBOW_SWIRL diff --git a/keyboards/gray_studio/think65/hotswap/info.json b/keyboards/gray_studio/think65/hotswap/info.json index 1912e10989..6e0a300ebf 100644 --- a/keyboards/gray_studio/think65/hotswap/info.json +++ b/keyboards/gray_studio/think65/hotswap/info.json @@ -8,6 +8,12 @@ "pid": "0x4001", "device_version": "0.0.1" }, + "rgblight": { + "saturation_steps": 8, + "brightness_steps": 8, + "led_count": 22, + "sleep": true + }, "ws2812": { "pin": "E2" }, diff --git a/keyboards/gray_studio/think65/solder/config.h b/keyboards/gray_studio/think65/solder/config.h index 7a2cc1f03c..314f467400 100644 --- a/keyboards/gray_studio/think65/solder/config.h +++ b/keyboards/gray_studio/think65/solder/config.h @@ -17,11 +17,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #pragma once - #define RGBLED_NUM 22 - #define RGBLIGHT_HUE_STEP 8 - #define RGBLIGHT_SAT_STEP 8 - #define RGBLIGHT_VAL_STEP 8 - #define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */ #define RGBLIGHT_EFFECT_BREATHING #define RGBLIGHT_EFFECT_RAINBOW_MOOD #define RGBLIGHT_EFFECT_RAINBOW_SWIRL diff --git a/keyboards/gray_studio/think65/solder/info.json b/keyboards/gray_studio/think65/solder/info.json index 7bc54a5bc5..a4e5d905ab 100644 --- a/keyboards/gray_studio/think65/solder/info.json +++ b/keyboards/gray_studio/think65/solder/info.json @@ -8,6 +8,12 @@ "pid": "0x4000", "device_version": "0.0.1" }, + "rgblight": { + "saturation_steps": 8, + "brightness_steps": 8, + "led_count": 22, + "sleep": true + }, "ws2812": { "pin": "E2" }, diff --git a/keyboards/grid600/press/config.h b/keyboards/grid600/press/config.h index 81bccd015b..137d23b3ae 100644 --- a/keyboards/grid600/press/config.h +++ b/keyboards/grid600/press/config.h @@ -17,11 +17,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #pragma once - #define RGBLED_NUM 4 - #define RGBLIGHT_HUE_STEP 10 - #define RGBLIGHT_SAT_STEP 17 - #define RGBLIGHT_VAL_STEP 17 - #define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */ #define RGBLIGHT_EFFECT_BREATHING #define RGBLIGHT_EFFECT_RAINBOW_MOOD #define RGBLIGHT_EFFECT_RAINBOW_SWIRL diff --git a/keyboards/grid600/press/info.json b/keyboards/grid600/press/info.json index 6a5d86e0c7..a4a6f43730 100644 --- a/keyboards/grid600/press/info.json +++ b/keyboards/grid600/press/info.json @@ -12,6 +12,11 @@ "cols": ["F1", "F4", "F5", "F6"], "rows": ["F0"] }, + "rgblight": { + "hue_steps": 10, + "led_count": 4, + "sleep": true + }, "ws2812": { "pin": "B6" }, diff --git a/keyboards/h0oni/deskpad/config.h b/keyboards/h0oni/deskpad/config.h index ddcf0ebe4a..441e3b8c1a 100644 --- a/keyboards/h0oni/deskpad/config.h +++ b/keyboards/h0oni/deskpad/config.h @@ -20,6 +20,3 @@ #define LOCKING_SUPPORT_ENABLE /* Locking resynchronize hack */ #define LOCKING_RESYNC_ENABLE - -/* Defining tapping term */ -#define TAPPING_TERM 250
\ No newline at end of file diff --git a/keyboards/h0oni/deskpad/info.json b/keyboards/h0oni/deskpad/info.json index 96a23f7f61..e51aa7e7df 100644 --- a/keyboards/h0oni/deskpad/info.json +++ b/keyboards/h0oni/deskpad/info.json @@ -8,6 +8,9 @@ "pid": "0x4450", "device_version": "0.0.1" }, + "tapping": { + "term": 250 + }, "matrix_pins": { "cols": ["D0", "D4", "D1"], "rows": ["D7", "C6"] diff --git a/keyboards/h0oni/hotduck/config.h b/keyboards/h0oni/hotduck/config.h index 9891423e3f..13e5bfb2d3 100644 --- a/keyboards/h0oni/hotduck/config.h +++ b/keyboards/h0oni/hotduck/config.h @@ -28,10 +28,6 @@ #define RGBLIGHT_EFFECT_RGB_TEST #define RGBLIGHT_EFFECT_ALTERNATING #define RGBLIGHT_EFFECT_TWINKLE -#define RGBLED_NUM 20 -#define RGBLIGHT_HUE_STEP 10 -#define RGBLIGHT_SAT_STEP 15 -#define RGBLIGHT_VAL_STEP 15 /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ #define LOCKING_SUPPORT_ENABLE diff --git a/keyboards/h0oni/hotduck/info.json b/keyboards/h0oni/hotduck/info.json index 6e8e2e6144..2a1e8449d4 100644 --- a/keyboards/h0oni/hotduck/info.json +++ b/keyboards/h0oni/hotduck/info.json @@ -13,6 +13,12 @@ "rows": ["B6", "B2", "B3", "B1", "F7", "F6", "F5"] }, "diode_direction": "COL2ROW", + "rgblight": { + "hue_steps": 10, + "saturation_steps": 15, + "brightness_steps": 15, + "led_count": 20 + }, "ws2812": { "pin": "F4" }, diff --git a/keyboards/hackpad/info.json b/keyboards/hackpad/info.json new file mode 100644 index 0000000000..0a77c9320c --- /dev/null +++ b/keyboards/hackpad/info.json @@ -0,0 +1,78 @@ +{ + "manufacturer": "Nico Stuhlmueller", + "keyboard_name": "hackpad", + "maintainer": "ThePurox", + "development_board": "promicro", + "diode_direction": "COL2ROW", + "features": { + "bootmagic": true, + "command": false, + "console": false, + "extrakey": true, + "mousekey": true, + "nkro": true, + "rgblight": true, + "encoder": true + }, + "matrix_pins": { + "cols": ["B1", "B3", "B2", "B6"], + "rows": ["C6", "D7", "E6", "B4", "B5"] + }, + "encoder": { + "rotary": [ + {"pin_a": "F5", "pin_b": "F4"} + ] + }, + "url": "https://git.imaginaerraum.de/Purox/Hackpad", + "usb": { + "device_version": "1.0.0", + "pid": "0x0000", + "vid": "0xFEED" + }, + "ws2812": { + "pin": "D4" + }, + "rgblight": { + "led_count": 16, + "sleep": true, + "animations": { + "breathing": true, + "rainbow_mood": true, + "rainbow_swirl": true, + "snake": true, + "knight": true, + "christmas": true, + "static_gradient": true, + "rgb_test": true, + "alternating": true, + "twinkle": true + } + }, + "layouts": { + "LAYOUT": { + "layout": [ + {"matrix": [0, 3], "x": 3, "y": 0}, + + {"matrix": [1, 0], "x": 0, "y": 1}, + {"matrix": [1, 1], "x": 1, "y": 1}, + {"matrix": [1, 2], "x": 2, "y": 1}, + {"matrix": [1, 3], "x": 3, "y": 1}, + + {"matrix": [2, 0], "x": 0, "y": 2}, + {"matrix": [2, 1], "x": 1, "y": 2}, + {"matrix": [2, 2], "x": 2, "y": 2}, + {"matrix": [2, 3], "x": 3, "y": 2}, + + {"matrix": [3, 0], "x": 0, "y": 3}, + {"matrix": [3, 1], "x": 1, "y": 3}, + {"matrix": [3, 2], "x": 2, "y": 3}, + {"matrix": [3, 3], "x": 3, "y": 3}, + + {"matrix": [4, 0], "x": 0, "y": 4}, + {"matrix": [4, 1], "x": 1, "y": 4}, + {"matrix": [4, 2], "x": 2, "y": 4}, + {"matrix": [4, 3], "x": 3, "y": 4} + ] + } + } +} diff --git a/keyboards/hackpad/keymaps/default/keymap.c b/keyboards/hackpad/keymaps/default/keymap.c new file mode 100644 index 0000000000..43489484ae --- /dev/null +++ b/keyboards/hackpad/keymaps/default/keymap.c @@ -0,0 +1,30 @@ +// Copyright 2023 Nico Stuhlmueller (@ThePurox) +// SPDX-License-Identifier: GPL-2.0-or-later + +#include QMK_KEYBOARD_H +#include "keymap_german.h" + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + /* ┌───┐ + * │MUT│ + * ┌───┬───┬───┼───┤ + * │ 7 │ 8 │ 9 │ + │ + * ├───┼───┼───┼───┤ + * │ 4 │ 5 │ 6 │ - │ + * ├───┼───┼───┼───┤ + * │ 1 │ 2 │ 3 │ * │ + * ├───┼───┼───┼───┤ + * │ 0 │ . │Ent│ / │ + * └───┴───┴───┴───┘ + */ + [0] = LAYOUT( LT(1, KC_MUTE), + KC_7, KC_8, KC_9, DE_PLUS, + KC_4, KC_5, KC_6, DE_MINS, + KC_1, KC_2, KC_3, DE_ASTR, + KC_0, KC_DOT, KC_ENT, DE_SLSH), + + [1] = LAYOUT( _______, + RGB_M_P, RGB_M_B, RGB_M_R, RGB_HUI, + RGB_M_SW, RGB_M_SN, RGB_M_K, RGB_HUD, + RGB_M_X, RGB_M_G, RGB_M_TW, RGB_VAI, + RGB_TOG, RGB_SAI, RGB_SAD, RGB_VAD)}; diff --git a/keyboards/hackpad/readme.md b/keyboards/hackpad/readme.md new file mode 100644 index 0000000000..f992e55b39 --- /dev/null +++ b/keyboards/hackpad/readme.md @@ -0,0 +1,31 @@ +# hackpad + + + + +The `Hackpad` is a 4x4 numpad/macropad designed for the Arduino Day 2023 in Bayreuth in cooperation with the hackspace [Imaginärraum e.V.](imaginaerraum.de) and [Fablab-Bayreuth e.V.](fablab-bayreuth.de). +It supports 16 MX-style switches, an EC-11 rotary encoder, and per key RGB LEDs based on SK6812. + +In v0.2 all necessary components are through hole components (except for an optional reset switch and RGB-LEDs), but the ProMicro protrudes out of the case. +In v0.3 this is fixed by moving some diodes to the bottom side. The bottom diodes however are SMD only. + +* Keyboard Maintainer: [Nico Stuhlmueller](https://github.com/ThePurox) +* Hardware Supported: ProMicro is supported in v0.2 and v0.3 of the PCBs +* Hardware Availability: PCBs can be found [here](https://git.imaginaerraum.de/Purox/Hackpad) + +Make example for this keyboard (after setting up your build environment): + + make hackpad:default + +Flashing example for this keyboard: + + make hackpad:default:flash + +See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). + +## Bootloader + +Enter the bootloader in 2 ways: + +* **Physical reset button**: Briefly press the button on the top of the PCB - some may have pads you must short instead +* **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available diff --git a/keyboards/hackpad/rules.mk b/keyboards/hackpad/rules.mk new file mode 100644 index 0000000000..7114cc3295 --- /dev/null +++ b/keyboards/hackpad/rules.mk @@ -0,0 +1 @@ +# this file is intentionally left blank diff --git a/keyboards/hadron/ver2/config.h b/keyboards/hadron/ver2/config.h index 7b7acf32b6..85a236184d 100644 --- a/keyboards/hadron/ver2/config.h +++ b/keyboards/hadron/ver2/config.h @@ -30,6 +30,3 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #define RGBLIGHT_EFFECT_RGB_TEST #define RGBLIGHT_EFFECT_ALTERNATING #define RGBLIGHT_EFFECT_TWINKLE -#define RGBLED_NUM 14 // Number of LEDs -#define RGBLIGHT_HUE_STEP 10 -#define RGBLIGHT_SAT_STEP 17 diff --git a/keyboards/hadron/ver2/info.json b/keyboards/hadron/ver2/info.json index 612d3af50a..ad56f5c9ab 100644 --- a/keyboards/hadron/ver2/info.json +++ b/keyboards/hadron/ver2/info.json @@ -7,6 +7,10 @@ "rows": ["D7", "E6", "B4", "B5", "B6"] }, "diode_direction": "COL2ROW", + "rgblight": { + "hue_steps": 10, + "led_count": 14 + }, "ws2812": { "pin": "D4" }, diff --git a/keyboards/hadron/ver3/config.h b/keyboards/hadron/ver3/config.h index 02e4116bb6..be315e668a 100644 --- a/keyboards/hadron/ver3/config.h +++ b/keyboards/hadron/ver3/config.h @@ -118,8 +118,7 @@ #define RGBLIGHT_EFFECT_ALTERNATING #define RGBLIGHT_EFFECT_TWINKLE -#define RGBLED_NUM 10 -#define RGB_MATRIX_LED_COUNT RGBLED_NUM +#define RGB_MATRIX_LED_COUNT 10 // #define RGB_MATRIX_KEYPRESSES diff --git a/keyboards/hadron/ver3/info.json b/keyboards/hadron/ver3/info.json index 753a9676ce..466dafbc53 100644 --- a/keyboards/hadron/ver3/info.json +++ b/keyboards/hadron/ver3/info.json @@ -15,6 +15,9 @@ {"pin_a": "B13", "pin_b": "B14"} ] }, + "rgblight": { + "led_count": 10 + }, "ws2812": { "pin": "B5" }, diff --git a/keyboards/hadron/ver3/keymaps/sebaslayout/keymap.c b/keyboards/hadron/ver3/keymaps/sebaslayout/keymap.c index 01fe45bd05..fcae7f07c6 100644 --- a/keyboards/hadron/ver3/keymaps/sebaslayout/keymap.c +++ b/keyboards/hadron/ver3/keymaps/sebaslayout/keymap.c @@ -41,17 +41,3 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { */ }; - -void matrix_init_user(void) { -} - -void matrix_scan_user(void) { -} - -bool process_record_user(uint16_t keycode, keyrecord_t *record) { - return true; -} - -void led_set_user(uint8_t usb_led) { - -} diff --git a/keyboards/halfcliff/config.h b/keyboards/halfcliff/config.h index 6f5dd093d6..d3c5de4338 100644 --- a/keyboards/halfcliff/config.h +++ b/keyboards/halfcliff/config.h @@ -25,14 +25,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #define MATRIX_ROW_PINS { F5, F6, F7, D7, B5, F5, F6, F7, D7, B5 } #define MATRIX_COL_PINS { B4, E6, C6, B6, B2 } - #define RGBLED_NUM 10 - #define RGBLIGHT_SPLIT - #define RGBLED_SPLIT { 5, 5 } - #define RGBLIGHT_HUE_STEP 8 - #define RGBLIGHT_SAT_STEP 8 - #define RGBLIGHT_VAL_STEP 8 - #define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */ - /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ #define LOCKING_SUPPORT_ENABLE /* Locking resynchronize hack */ diff --git a/keyboards/halfcliff/info.json b/keyboards/halfcliff/info.json index fb0666fbf4..0c9b4ddb0f 100644 --- a/keyboards/halfcliff/info.json +++ b/keyboards/halfcliff/info.json @@ -16,6 +16,13 @@ "split": { "soft_serial_pin": "D2" }, + "rgblight": { + "saturation_steps": 8, + "brightness_steps": 8, + "led_count": 10, + "sleep": true, + "split_count": [5, 5] + }, "ws2812": { "pin": "D3" }, diff --git a/keyboards/halokeys/elemental75/config.h b/keyboards/halokeys/elemental75/config.h index c23763ee9b..0f093b6455 100644 --- a/keyboards/halokeys/elemental75/config.h +++ b/keyboards/halokeys/elemental75/config.h @@ -15,11 +15,6 @@ */ #pragma once -#define TAP_CODE_DELAY 10 // tap_code function delay for register and unregister - -#define RGBLED_NUM 22 -#define RGBLIGHT_SLEEP - /* animations enabled */ #define RGBLIGHT_EFFECT_BREATHING #define RGBLIGHT_EFFECT_RAINBOW_MOOD @@ -34,9 +29,6 @@ //#define RGBLIGHT_DISABLE_KEYCODES -// Tap dance term declaration -#define TAPPING_TERM 300 - /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ #define LOCKING_SUPPORT_ENABLE diff --git a/keyboards/halokeys/elemental75/info.json b/keyboards/halokeys/elemental75/info.json index 5f8bdb38a6..56feac1e6b 100644 --- a/keyboards/halokeys/elemental75/info.json +++ b/keyboards/halokeys/elemental75/info.json @@ -18,11 +18,19 @@ {"pin_a": "B6", "pin_b": "B5"} ] }, + "tapping": { + "term": 300 + }, + "qmk": { + "tap_keycode_delay": 10 + }, "ws2812": { "pin": "A10" }, "rgblight": { - "max_brightness": 225 + "led_count": 22, + "max_brightness": 225, + "sleep": true }, "processor": "STM32F303", "bootloader": "stm32-dfu", diff --git a/keyboards/hand88/rules.mk b/keyboards/hand88/rules.mk index 266889cfe7..475da66262 100755..100644 --- a/keyboards/hand88/rules.mk +++ b/keyboards/hand88/rules.mk @@ -1,7 +1,3 @@ -# Do not put the microcontroller into power saving mode -# when we get USB suspend event. We want it to keep updating -# backlight effects. -OPT_DEFS += -DCORTEX_ENABLE_WFI_IDLE=TRUE # Build Options # change yes to no to disable diff --git a/keyboards/handwired/2x5keypad/config.h b/keyboards/handwired/2x5keypad/config.h index 819f0f640f..5f36081323 100644 --- a/keyboards/handwired/2x5keypad/config.h +++ b/keyboards/handwired/2x5keypad/config.h @@ -5,6 +5,3 @@ /* Locking resynchronize hack */ #define LOCKING_RESYNC_ENABLE - -/* Tap dancing params */ -#define TAPPING_TERM 250 diff --git a/keyboards/handwired/2x5keypad/info.json b/keyboards/handwired/2x5keypad/info.json index 1df0ccbdee..b33273e19d 100644 --- a/keyboards/handwired/2x5keypad/info.json +++ b/keyboards/handwired/2x5keypad/info.json @@ -8,6 +8,9 @@ "pid": "0x2020", "device_version": "0.0.1" }, + "tapping": { + "term": 250 + }, "matrix_pins": { "cols": ["D4", "C6", "D7", "E6", "B4"], "rows": ["B3", "B2"] diff --git a/keyboards/handwired/3dp660/config.h b/keyboards/handwired/3dp660/config.h index f804456960..c2949ab3a7 100644 --- a/keyboards/handwired/3dp660/config.h +++ b/keyboards/handwired/3dp660/config.h @@ -17,9 +17,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #pragma once - -#define TAPPING_TERM 400 - /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ #define LOCKING_SUPPORT_ENABLE /* Locking resynchronize hack */ diff --git a/keyboards/handwired/3dp660/info.json b/keyboards/handwired/3dp660/info.json index c3bc103d77..6d380fc3c6 100644 --- a/keyboards/handwired/3dp660/info.json +++ b/keyboards/handwired/3dp660/info.json @@ -8,6 +8,9 @@ "pid": "0x3660", "device_version": "0.0.1" }, + "tapping": { + "term": 400 + }, "matrix_pins": { "cols": ["D2", "D3", "C6", "C7", "D5", "D4", "D7", "B4", "B5", "B6", "F7", "F6", "F5", "F4", "F1"], "rows": ["B0", "B1", "B2", "B3", "B7"] diff --git a/keyboards/handwired/42/config.h b/keyboards/handwired/42/config.h index 57a8664649..fa9a83d08e 100644 --- a/keyboards/handwired/42/config.h +++ b/keyboards/handwired/42/config.h @@ -4,5 +4,3 @@ #define LOCKING_SUPPORT_ENABLE /* Locking resynchronize hack */ #define LOCKING_RESYNC_ENABLE - -#define TAPPING_TERM 100 diff --git a/keyboards/handwired/42/info.json b/keyboards/handwired/42/info.json index dccafc6d86..fae660de93 100644 --- a/keyboards/handwired/42/info.json +++ b/keyboards/handwired/42/info.json @@ -8,6 +8,9 @@ "pid": "0x0000", "device_version": "0.0.3" }, + "tapping": { + "term": 100 + }, "matrix_pins": { "cols": ["F5", "F6", "F7", "F0", "F1", "F4", "B6", "B5", "D7", "C7", "D6", "B7"], "rows": ["D2", "D3", "D0", "D1"] diff --git a/keyboards/handwired/6macro/config.h b/keyboards/handwired/6macro/config.h index 55716a3b7a..9b3ff4cb6d 100644 --- a/keyboards/handwired/6macro/config.h +++ b/keyboards/handwired/6macro/config.h @@ -17,12 +17,7 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #pragma once -#define RGBLED_NUM 10 -#define RGB_MATRIX_LED_COUNT RGBLED_NUM -#define RGBLIGHT_HUE_STEP 10 -#define RGBLIGHT_SAT_STEP 17 -#define RGBLIGHT_VAL_STEP 17 -// #define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */ +#define RGB_MATRIX_LED_COUNT 10 #define RGBLIGHT_EFFECT_BREATHING #define RGBLIGHT_EFFECT_RAINBOW_MOOD #define RGBLIGHT_EFFECT_RAINBOW_SWIRL diff --git a/keyboards/handwired/6macro/info.json b/keyboards/handwired/6macro/info.json index 5bc9833fa5..8f41316cd8 100644 --- a/keyboards/handwired/6macro/info.json +++ b/keyboards/handwired/6macro/info.json @@ -8,6 +8,10 @@ "pid": "0x0037", "device_version": "0.0.1" }, + "rgblight": { + "hue_steps": 10, + "led_count": 10 + }, "ws2812": { "pin": "D2" }, diff --git a/keyboards/handwired/aek64/config.h b/keyboards/handwired/aek64/config.h index 6291115158..fa8d618c74 100644 --- a/keyboards/handwired/aek64/config.h +++ b/keyboards/handwired/aek64/config.h @@ -22,6 +22,3 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #define RCPC_KEYS KC_RCTL, KC_TRNS, KC_PGDN #define LSPO_KEYS KC_LSFT, KC_TRNS, KC_HOME #define LCPO_KEYS KC_LCTL, KC_TRNS, KC_END - -/* Enable double tab */ -#define TAPPING_TERM 175 diff --git a/keyboards/handwired/aek64/info.json b/keyboards/handwired/aek64/info.json index dfa762ce81..e71156e988 100644 --- a/keyboards/handwired/aek64/info.json +++ b/keyboards/handwired/aek64/info.json @@ -18,6 +18,9 @@ "levels": 5, "breathing": true }, + "tapping": { + "term": 175 + }, "processor": "at90usb1286", "bootloader": "halfkay", "layouts": { diff --git a/keyboards/handwired/angel/config.h b/keyboards/handwired/angel/config.h index 3439d8c8c1..ee492503d1 100644 --- a/keyboards/handwired/angel/config.h +++ b/keyboards/handwired/angel/config.h @@ -17,8 +17,5 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #pragma once -// https://docs.qmk.fm/using-qmk/software-features/tap_hold -#define TAPPING_TERM 200 - /* define if matrix has ghost (lacks anti-ghosting diodes) */ #define MATRIX_HAS_GHOST diff --git a/keyboards/handwired/aranck/config.h b/keyboards/handwired/aranck/config.h index 6f44c0cbba..b20b3099e9 100644 --- a/keyboards/handwired/aranck/config.h +++ b/keyboards/handwired/aranck/config.h @@ -31,9 +31,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. * Aranck-specific definitions END */ - -#define TAPPING_TERM 200 - /* * Feature disable options * These options are also useful to firmware size reduction. diff --git a/keyboards/handwired/arrow_pad/keymaps/default/keymap.c b/keyboards/handwired/arrow_pad/keymaps/default/keymap.c index cecaefe80d..820851f803 100644 --- a/keyboards/handwired/arrow_pad/keymaps/default/keymap.c +++ b/keyboards/handwired/arrow_pad/keymaps/default/keymap.c @@ -96,9 +96,9 @@ bool process_record_user(uint16_t keycode, keyrecord_t * record) { return true; } -void led_set_user(uint8_t usb_led) +bool led_update_user(led_t led_state) { - if (usb_led & (1<<USB_LED_CAPS_LOCK)) { + if (led_state.caps_lock) { // output high DDRD |= (1<<6); PORTD |= (1<<6); @@ -107,7 +107,7 @@ void led_set_user(uint8_t usb_led) DDRD &= ~(1<<6); PORTD &= ~(1<<6); } - if (usb_led & (1<<USB_LED_NUM_LOCK)) { + if (led_state.num_lock) { // output low DDRC |= (1<<7); PORTC |= ~(1<<7); @@ -116,4 +116,5 @@ void led_set_user(uint8_t usb_led) DDRC &= ~(1<<7); PORTC &= ~(1<<7); } + return false; } diff --git a/keyboards/handwired/arrow_pad/keymaps/pad_21/keymap.c b/keyboards/handwired/arrow_pad/keymaps/pad_21/keymap.c index cf291c00cf..c3ab462ce3 100644 --- a/keyboards/handwired/arrow_pad/keymaps/pad_21/keymap.c +++ b/keyboards/handwired/arrow_pad/keymaps/pad_21/keymap.c @@ -109,9 +109,9 @@ bool process_record_user(uint16_t keycode, keyrecord_t * record) { return true; } -void led_set_user(uint8_t usb_led) +bool led_update_user(led_t led_state) { - if (usb_led & (1<<USB_LED_CAPS_LOCK)) { + if (led_state.caps_lock) { // output high DDRD |= (1<<6); PORTD |= (1<<6); @@ -120,7 +120,7 @@ void led_set_user(uint8_t usb_led) DDRD &= ~(1<<6); PORTD &= ~(1<<6); } - if (usb_led & (1<<USB_LED_NUM_LOCK)) { + if (led_state.num_lock) { // output low DDRC |= (1<<7); PORTC |= ~(1<<7); @@ -129,4 +129,5 @@ void led_set_user(uint8_t usb_led) DDRC &= ~(1<<7); PORTC &= ~(1<<7); } + return false; } diff --git a/keyboards/handwired/arrow_pad/keymaps/pad_24/keymap.c b/keyboards/handwired/arrow_pad/keymaps/pad_24/keymap.c index b69d49b7e5..fc044a0e1a 100644 --- a/keyboards/handwired/arrow_pad/keymaps/pad_24/keymap.c +++ b/keyboards/handwired/arrow_pad/keymaps/pad_24/keymap.c @@ -96,9 +96,9 @@ bool process_record_user(uint16_t keycode, keyrecord_t * record) { return true; } -void led_set_user(uint8_t usb_led) +bool led_update_user(led_t led_state) { - if (usb_led & (1<<USB_LED_CAPS_LOCK)) { + if (led_state.caps_lock) { // output high DDRD |= (1<<6); PORTD |= (1<<6); @@ -107,7 +107,7 @@ void led_set_user(uint8_t usb_led) DDRD &= ~(1<<6); PORTD &= ~(1<<6); } - if (usb_led & (1<<USB_LED_NUM_LOCK)) { + if (led_state.num_lock) { // output low DDRC |= (1<<7); PORTC |= ~(1<<7); @@ -116,4 +116,5 @@ void led_set_user(uint8_t usb_led) DDRC &= ~(1<<7); PORTC &= ~(1<<7); } + return false; } diff --git a/keyboards/handwired/atreus50/config.h b/keyboards/handwired/atreus50/config.h index 89532fd32b..3a3231b9b9 100644 --- a/keyboards/handwired/atreus50/config.h +++ b/keyboards/handwired/atreus50/config.h @@ -33,10 +33,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #define RGBLIGHT_EFFECT_RGB_TEST #define RGBLIGHT_EFFECT_ALTERNATING #define RGBLIGHT_EFFECT_TWINKLE -#define RGBLED_NUM 12 // Number of LEDs -#define RGBLIGHT_HUE_STEP 10 -#define RGBLIGHT_SAT_STEP 17 -#define RGBLIGHT_VAL_STEP 17 /* * Feature disable options diff --git a/keyboards/handwired/atreus50/info.json b/keyboards/handwired/atreus50/info.json index cb1d6f6f0a..e1394555fe 100644 --- a/keyboards/handwired/atreus50/info.json +++ b/keyboards/handwired/atreus50/info.json @@ -8,6 +8,10 @@ "pid": "0x040D", "device_version": "0.0.1" }, + "rgblight": { + "hue_steps": 10, + "led_count": 12 + }, "ws2812": { "pin": "C6" }, diff --git a/keyboards/handwired/bento/rev1/config.h b/keyboards/handwired/bento/rev1/config.h index 75eb7537b2..bf4ae6d7d1 100644 --- a/keyboards/handwired/bento/rev1/config.h +++ b/keyboards/handwired/bento/rev1/config.h @@ -16,11 +16,6 @@ #pragma once - #define RGBLED_NUM 4 - #define RGBLIGHT_HUE_STEP 8 - #define RGBLIGHT_SAT_STEP 8 - #define RGBLIGHT_VAL_STEP 8 - #define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */ #define RGBLIGHT_EFFECT_BREATHING #define RGBLIGHT_EFFECT_RAINBOW_MOOD #define RGBLIGHT_EFFECT_RAINBOW_SWIRL diff --git a/keyboards/handwired/bento/rev1/info.json b/keyboards/handwired/bento/rev1/info.json index 555731bdd5..527341e96a 100644 --- a/keyboards/handwired/bento/rev1/info.json +++ b/keyboards/handwired/bento/rev1/info.json @@ -8,6 +8,12 @@ "pid": "0xDAD3", "device_version": "1.0.0" }, + "rgblight": { + "saturation_steps": 8, + "brightness_steps": 8, + "led_count": 4, + "sleep": true + }, "ws2812": { "pin": "D3" }, diff --git a/keyboards/handwired/brain/config.h b/keyboards/handwired/brain/config.h index 61dddcd9c2..91253b1695 100644 --- a/keyboards/handwired/brain/config.h +++ b/keyboards/handwired/brain/config.h @@ -42,10 +42,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. /* Enables This makes it easier for fast typists to use dual-function keys */ #define PERMISSIVE_HOLD -#define RGBLED_NUM 28 // Number of LEDs - -#define RGBLIGHT_SPLIT - /* * Feature disable options * These options are also useful to firmware size reduction. @@ -61,6 +57,3 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. //#define NO_ACTION_LAYER //#define NO_ACTION_TAPPING //#define NO_ACTION_ONESHOT - -//#define TAPPING_TERM 150 -//#define QUICK_TAP_TERM 0 diff --git a/keyboards/handwired/brain/info.json b/keyboards/handwired/brain/info.json index 0454b36669..910a628ca6 100644 --- a/keyboards/handwired/brain/info.json +++ b/keyboards/handwired/brain/info.json @@ -20,6 +20,8 @@ "pin": "D3" }, "rgblight": { + "led_count": 28, + "split": true, "max_brightness": 120 }, "split": { diff --git a/keyboards/handwired/chiron/config.h b/keyboards/handwired/chiron/config.h index 677804cbe9..4d245e80e4 100644 --- a/keyboards/handwired/chiron/config.h +++ b/keyboards/handwired/chiron/config.h @@ -22,5 +22,3 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #define LOCKING_SUPPORT_ENABLE #define LOCKING_RESYNC_ENABLE - -#define RGBLED_NUM 4 diff --git a/keyboards/handwired/chiron/info.json b/keyboards/handwired/chiron/info.json index 2cb9a7a4d9..0bbdefe921 100644 --- a/keyboards/handwired/chiron/info.json +++ b/keyboards/handwired/chiron/info.json @@ -17,6 +17,9 @@ "pin": "B6", "levels": 7 }, + "rgblight": { + "led_count": 4 + }, "ws2812": { "pin": "D3" }, diff --git a/keyboards/handwired/ck4x4/rules.mk b/keyboards/handwired/ck4x4/rules.mk index 9a1946bb60..91a488483f 100644 --- a/keyboards/handwired/ck4x4/rules.mk +++ b/keyboards/handwired/ck4x4/rules.mk @@ -11,5 +11,3 @@ NKRO_ENABLE = yes # Enable N-Key Rollover DEFAULT_FOLDER = handwired/ck4x4 -# Enter lower-power sleep mode when on the ChibiOS idle thread -OPT_DEFS += -DCORTEX_ENABLE_WFI_IDLE=TRUE diff --git a/keyboards/handwired/co60/rev7/config.h b/keyboards/handwired/co60/rev7/config.h index 8cafa3c6f3..be60d6b522 100644 --- a/keyboards/handwired/co60/rev7/config.h +++ b/keyboards/handwired/co60/rev7/config.h @@ -36,8 +36,3 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #define RGBLIGHT_EFFECT_RGB_TEST #define RGBLIGHT_EFFECT_ALTERNATING #define RGBLIGHT_EFFECT_TWINKLE - -#define RGBLED_NUM 16 -#define RGB_MATRIX_LED_COUNT RGBLED_NUM - -#define RGB_MATRIX_KEYPRESSES diff --git a/keyboards/handwired/co60/rev7/info.json b/keyboards/handwired/co60/rev7/info.json index 1f1c2a2cf9..1475c808f3 100644 --- a/keyboards/handwired/co60/rev7/info.json +++ b/keyboards/handwired/co60/rev7/info.json @@ -12,6 +12,9 @@ "pin": "B8", "breathing": true }, + "rgblight": { + "led_count": 16 + }, "ws2812": { "pin": "A7", "driver": "spi" diff --git a/keyboards/handwired/concertina/64key/config.h b/keyboards/handwired/concertina/64key/config.h index b315e309ae..70aafa3bfd 100644 --- a/keyboards/handwired/concertina/64key/config.h +++ b/keyboards/handwired/concertina/64key/config.h @@ -16,7 +16,4 @@ #pragma once -/* LEDs are not used in the standard 64key configuration. */ -#define RGBLED_NUM 0 - #define PERMISSIVE_HOLD diff --git a/keyboards/handwired/concertina/64key/info.json b/keyboards/handwired/concertina/64key/info.json index 1bca5a6fa4..2786c33451 100644 --- a/keyboards/handwired/concertina/64key/info.json +++ b/keyboards/handwired/concertina/64key/info.json @@ -8,6 +8,9 @@ "pid": "0x3632", "device_version": "0.0.1" }, + "rgblight": { + "led_count": 0 + }, "ws2812": { "pin": "D3" }, diff --git a/keyboards/handwired/consolekeyboard/18key/config.h b/keyboards/handwired/consolekeyboard/18key/config.h index bbc4eccf18..7b68a5560c 100644 --- a/keyboards/handwired/consolekeyboard/18key/config.h +++ b/keyboards/handwired/consolekeyboard/18key/config.h @@ -16,11 +16,6 @@ #pragma once - #define RGBLED_NUM 6 - #define RGBLIGHT_HUE_STEP 8 - #define RGBLIGHT_SAT_STEP 8 - #define RGBLIGHT_VAL_STEP 8 - #define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */ #define RGBLIGHT_EFFECT_BREATHING // #define RGBLIGHT_EFFECT_RAINBOW_MOOD // #define RGBLIGHT_EFFECT_RAINBOW_SWIRL diff --git a/keyboards/handwired/consolekeyboard/18key/info.json b/keyboards/handwired/consolekeyboard/18key/info.json index 3a37174f36..d6ce8fb928 100644 --- a/keyboards/handwired/consolekeyboard/18key/info.json +++ b/keyboards/handwired/consolekeyboard/18key/info.json @@ -8,6 +8,12 @@ "pid": "0x3332", "device_version": "0.0.1" }, + "rgblight": { + "saturation_steps": 8, + "brightness_steps": 8, + "led_count": 6, + "sleep": true + }, "ws2812": { "pin": "F4" }, diff --git a/keyboards/handwired/consolekeyboard/20key/config.h b/keyboards/handwired/consolekeyboard/20key/config.h index bbc4eccf18..7b68a5560c 100644 --- a/keyboards/handwired/consolekeyboard/20key/config.h +++ b/keyboards/handwired/consolekeyboard/20key/config.h @@ -16,11 +16,6 @@ #pragma once - #define RGBLED_NUM 6 - #define RGBLIGHT_HUE_STEP 8 - #define RGBLIGHT_SAT_STEP 8 - #define RGBLIGHT_VAL_STEP 8 - #define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */ #define RGBLIGHT_EFFECT_BREATHING // #define RGBLIGHT_EFFECT_RAINBOW_MOOD // #define RGBLIGHT_EFFECT_RAINBOW_SWIRL diff --git a/keyboards/handwired/consolekeyboard/20key/info.json b/keyboards/handwired/consolekeyboard/20key/info.json index 1dc5a331e1..bfcbf70c85 100644 --- a/keyboards/handwired/consolekeyboard/20key/info.json +++ b/keyboards/handwired/consolekeyboard/20key/info.json @@ -8,6 +8,12 @@ "pid": "0x3432", "device_version": "0.0.1" }, + "rgblight": { + "saturation_steps": 8, + "brightness_steps": 8, + "led_count": 6, + "sleep": true + }, "ws2812": { "pin": "F4" }, diff --git a/keyboards/handwired/consolekeyboard/27key/config.h b/keyboards/handwired/consolekeyboard/27key/config.h index bbc4eccf18..7b68a5560c 100644 --- a/keyboards/handwired/consolekeyboard/27key/config.h +++ b/keyboards/handwired/consolekeyboard/27key/config.h @@ -16,11 +16,6 @@ #pragma once - #define RGBLED_NUM 6 - #define RGBLIGHT_HUE_STEP 8 - #define RGBLIGHT_SAT_STEP 8 - #define RGBLIGHT_VAL_STEP 8 - #define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */ #define RGBLIGHT_EFFECT_BREATHING // #define RGBLIGHT_EFFECT_RAINBOW_MOOD // #define RGBLIGHT_EFFECT_RAINBOW_SWIRL diff --git a/keyboards/handwired/consolekeyboard/27key/info.json b/keyboards/handwired/consolekeyboard/27key/info.json index 86682eb0f4..3c303fc9aa 100644 --- a/keyboards/handwired/consolekeyboard/27key/info.json +++ b/keyboards/handwired/consolekeyboard/27key/info.json @@ -8,6 +8,12 @@ "pid": "0x3433", "device_version": "0.0.1" }, + "rgblight": { + "saturation_steps": 8, + "brightness_steps": 8, + "led_count": 6, + "sleep": true + }, "ws2812": { "pin": "F4" }, diff --git a/keyboards/handwired/consolekeyboard/30key/config.h b/keyboards/handwired/consolekeyboard/30key/config.h index 30d9a2f459..8d327bf5bd 100644 --- a/keyboards/handwired/consolekeyboard/30key/config.h +++ b/keyboards/handwired/consolekeyboard/30key/config.h @@ -16,11 +16,6 @@ #pragma once - #define RGBLED_NUM 6 - #define RGBLIGHT_HUE_STEP 8 - #define RGBLIGHT_SAT_STEP 8 - #define RGBLIGHT_VAL_STEP 8 - #define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */ #define RGBLIGHT_EFFECT_BREATHING // #define RGBLIGHT_EFFECT_RAINBOW_MOOD // #define RGBLIGHT_EFFECT_RAINBOW_SWIRL diff --git a/keyboards/handwired/consolekeyboard/30key/info.json b/keyboards/handwired/consolekeyboard/30key/info.json index e2bac91ab1..9e60ae68ad 100644 --- a/keyboards/handwired/consolekeyboard/30key/info.json +++ b/keyboards/handwired/consolekeyboard/30key/info.json @@ -8,6 +8,12 @@ "pid": "0x3433", "device_version": "0.0.1" }, + "rgblight": { + "saturation_steps": 8, + "brightness_steps": 8, + "led_count": 6, + "sleep": true + }, "ws2812": { "pin": "F4" }, diff --git a/keyboards/handwired/croxsplit44/config.h b/keyboards/handwired/croxsplit44/config.h index 5703448756..8ef7c658a7 100644 --- a/keyboards/handwired/croxsplit44/config.h +++ b/keyboards/handwired/croxsplit44/config.h @@ -17,11 +17,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #pragma once - #define RGBLED_NUM 42 - #define RGBLIGHT_HUE_STEP 8 - #define RGBLIGHT_SAT_STEP 8 - #define RGBLIGHT_VAL_STEP 8 - #define RGBLIGHT_SLEEP #define RGBLIGHT_EFFECT_BREATHING #define RGBLIGHT_EFFECT_RAINBOW_MOOD #define RGBLIGHT_EFFECT_RAINBOW_SWIRL diff --git a/keyboards/handwired/croxsplit44/info.json b/keyboards/handwired/croxsplit44/info.json index 399dae6c33..74e1e0db69 100644 --- a/keyboards/handwired/croxsplit44/info.json +++ b/keyboards/handwired/croxsplit44/info.json @@ -8,6 +8,12 @@ "pid": "0x6146", "device_version": "0.0.1" }, + "rgblight": { + "saturation_steps": 8, + "brightness_steps": 8, + "led_count": 42, + "sleep": true + }, "ws2812": { "pin": "C4" }, diff --git a/keyboards/handwired/cyberstar/config.h b/keyboards/handwired/cyberstar/config.h index 813b565036..0e47fb3111 100644 --- a/keyboards/handwired/cyberstar/config.h +++ b/keyboards/handwired/cyberstar/config.h @@ -28,10 +28,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #define WS2812_DMA_CHANNEL 3 #define WS2812_BYTE_ORDER WS2812_BYTE_ORDER_RGB -#define RGBLED_NUM 12 -#define RGBLIGHT_HUE_STEP 8 -#define RGBLIGHT_SAT_STEP 8 -#define RGBLIGHT_VAL_STEP 8 #define RGBLIGHT_EFFECT_BREATHING #define RGBLIGHT_EFFECT_RAINBOW_MOOD #define RGBLIGHT_EFFECT_RAINBOW_SWIRL diff --git a/keyboards/handwired/cyberstar/info.json b/keyboards/handwired/cyberstar/info.json index 47eaab67a7..8384d1a69f 100644 --- a/keyboards/handwired/cyberstar/info.json +++ b/keyboards/handwired/cyberstar/info.json @@ -8,6 +8,11 @@ "pid": "0x432A", "device_version": "0.0.1" }, + "rgblight": { + "saturation_steps": 8, + "brightness_steps": 8, + "led_count": 12 + }, "ws2812": { "pin": "B4", "driver": "pwm" diff --git a/keyboards/handwired/cyberstar/rules.mk b/keyboards/handwired/cyberstar/rules.mk index 000ee78e21..cc9d7bb3f5 100644 --- a/keyboards/handwired/cyberstar/rules.mk +++ b/keyboards/handwired/cyberstar/rules.mk @@ -1,11 +1,6 @@ # Wildcard to allow APM32 MCU DFU_SUFFIX_ARGS = -v FFFF -p FFFF -# Do not put the microcontroller into power saving mode -# when we get USB suspend event. We want it to keep updating -# backlight effects. -OPT_DEFS += -DCORTEX_ENABLE_WFI_IDLE=TRUE - # Build Options # change yes to no to disable # diff --git a/keyboards/handwired/d48/config.h b/keyboards/handwired/d48/config.h index 64364451ff..9f06a2501a 100644 --- a/keyboards/handwired/d48/config.h +++ b/keyboards/handwired/d48/config.h @@ -2,10 +2,6 @@ /* RGB Underglow */ #ifdef RGBLIGHT_ENABLE -#define RGBLED_NUM 14 -#define RGBLIGHT_HUE_STEP 8 -#define RGBLIGHT_SAT_STEP 8 -#define RGBLIGHT_VAL_STEP 8 #define RGBLIGHT_EFFECT_BREATHING #define RGBLIGHT_EFFECT_RAINBOW_MOOD #define RGBLIGHT_EFFECT_RAINBOW_SWIRL @@ -35,9 +31,6 @@ #define OLED_TIMEOUT 0 // #define OLED_SCROLL_TIMEOUT 1000 -/* Taps (encoder tap_code) */ -#define TAP_CODE_DELAY 10 - /* I2C */ //#define I2C1_DUTY_CYCLE FAST_DUTY_CYCLE_2 //#define PAL_MODE_STM32_ALTERNATE_OPENDRAIN (PAL_MODE_ALTERNATE(4) | PAL_STM32_OTYPE_OPENDRAIN) diff --git a/keyboards/handwired/d48/info.json b/keyboards/handwired/d48/info.json index db3f2bbacc..f56cb99e20 100644 --- a/keyboards/handwired/d48/info.json +++ b/keyboards/handwired/d48/info.json @@ -8,6 +8,11 @@ "pid": "0x6060", "device_version": "0.0.1" }, + "rgblight": { + "saturation_steps": 8, + "brightness_steps": 8, + "led_count": 14 + }, "ws2812": { "pin": "A15" }, @@ -22,6 +27,9 @@ {"pin_a": "A0", "pin_b": "A1"} ] }, + "qmk": { + "tap_keycode_delay": 10 + }, "processor": "STM32F303", "bootloader": "stm32-dfu", "board": "QMK_PROTON_C", diff --git a/keyboards/handwired/dactyl/config.h b/keyboards/handwired/dactyl/config.h index f37a8f2722..94b407d735 100644 --- a/keyboards/handwired/dactyl/config.h +++ b/keyboards/handwired/dactyl/config.h @@ -37,10 +37,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #define MOUSEKEY_MAX_SPEED 7 #define MOUSEKEY_WHEEL_DELAY 0 -#define TAPPING_TOGGLE 1 - -#define TAPPING_TERM 200 - /* key combination for command */ #define IS_COMMAND() ( \ get_mods() == (MOD_BIT(KC_LCTL) | MOD_BIT(KC_RCTL)) || \ diff --git a/keyboards/handwired/dactyl/info.json b/keyboards/handwired/dactyl/info.json index 8297e609a1..e95c380d9c 100644 --- a/keyboards/handwired/dactyl/info.json +++ b/keyboards/handwired/dactyl/info.json @@ -11,6 +11,9 @@ "processor": "atmega32u4", "bootloader": "halfkay", "debounce": 15, + "tapping": { + "toggle": 1 + }, "layouts": { "LAYOUT_dactyl": { "layout": [ diff --git a/keyboards/handwired/dactyl_cc/info.json b/keyboards/handwired/dactyl_cc/info.json new file mode 100644 index 0000000000..ffaf326f21 --- /dev/null +++ b/keyboards/handwired/dactyl_cc/info.json @@ -0,0 +1,117 @@ +{ + "keyboard_name": "Dactyl CC", + "manufacturer": "mjohns", + "url": "https://github.com/mjohns/dactyl-cc", + "maintainer": "qmk", + "usb": { + "vid": "0xFEED", + "pid": "0x3060", + "device_version": "0.0.1" + }, + "features": { + "bootmagic": true, + "mousekey": true, + "extrakey": true, + "console": false, + "command": true, + "nkro": false + }, + "matrix_pins": { + "cols": ["D4", "C6", "D7", "E6", "B4", "B5"], + "rows": ["F6", "F7", "B1", "B3", "B2", "B6"] + }, + "diode_direction": "COL2ROW", + "split": { + "enabled": true, + "soft_serial_pin": "D0" + }, + "development_board": "promicro", + "layouts": { + "LAYOUT": { + "layout": [ + {"matrix": [0, 0], "x": 0, "y": 0}, + {"matrix": [0, 1], "x": 1, "y": 0}, + {"matrix": [0, 2], "x": 2, "y": 0}, + {"matrix": [0, 3], "x": 3, "y": 0}, + {"matrix": [0, 4], "x": 4, "y": 0}, + {"matrix": [0, 5], "x": 5, "y": 0}, + + {"matrix": [6, 0], "x": 11, "y": 0}, + {"matrix": [6, 1], "x": 12, "y": 0}, + {"matrix": [6, 2], "x": 13, "y": 0}, + {"matrix": [6, 3], "x": 14, "y": 0}, + {"matrix": [6, 4], "x": 15, "y": 0}, + {"matrix": [6, 5], "x": 16, "y": 0}, + + {"matrix": [1, 0], "x": 0, "y": 1}, + {"matrix": [1, 1], "x": 1, "y": 1}, + {"matrix": [1, 2], "x": 2, "y": 1}, + {"matrix": [1, 3], "x": 3, "y": 1}, + {"matrix": [1, 4], "x": 4, "y": 1}, + {"matrix": [1, 5], "x": 5, "y": 1}, + + {"matrix": [7, 0], "x": 11, "y": 1}, + {"matrix": [7, 1], "x": 12, "y": 1}, + {"matrix": [7, 2], "x": 13, "y": 1}, + {"matrix": [7, 3], "x": 14, "y": 1}, + {"matrix": [7, 4], "x": 15, "y": 1}, + {"matrix": [7, 5], "x": 16, "y": 1}, + + {"matrix": [2, 0], "x": 0, "y": 2}, + {"matrix": [2, 1], "x": 1, "y": 2}, + {"matrix": [2, 2], "x": 2, "y": 2}, + {"matrix": [2, 3], "x": 3, "y": 2}, + {"matrix": [2, 4], "x": 4, "y": 2}, + {"matrix": [2, 5], "x": 5, "y": 2}, + + {"matrix": [8, 0], "x": 11, "y": 2}, + {"matrix": [8, 1], "x": 12, "y": 2}, + {"matrix": [8, 2], "x": 13, "y": 2}, + {"matrix": [8, 3], "x": 14, "y": 2}, + {"matrix": [8, 4], "x": 15, "y": 2}, + {"matrix": [8, 5], "x": 16, "y": 2}, + + {"matrix": [3, 0], "x": 0, "y": 3}, + {"matrix": [3, 1], "x": 1, "y": 3}, + {"matrix": [3, 2], "x": 2, "y": 3}, + {"matrix": [3, 3], "x": 3, "y": 3}, + {"matrix": [3, 4], "x": 4, "y": 3}, + {"matrix": [3, 5], "x": 5, "y": 3}, + + {"matrix": [9, 0], "x": 11, "y": 3}, + {"matrix": [9, 1], "x": 12, "y": 3}, + {"matrix": [9, 2], "x": 13, "y": 3}, + {"matrix": [9, 3], "x": 14, "y": 3}, + {"matrix": [9, 4], "x": 15, "y": 3}, + {"matrix": [9, 5], "x": 16, "y": 3}, + + {"matrix": [4, 0], "x": 1, "y": 4}, + {"matrix": [4, 1], "x": 2, "y": 4}, + {"matrix": [4, 2], "x": 3, "y": 4}, + {"matrix": [4, 3], "x": 4, "y": 4}, + + {"matrix": [10, 2], "x": 12, "y": 4}, + {"matrix": [10, 3], "x": 13, "y": 4}, + {"matrix": [10, 4], "x": 14, "y": 4}, + {"matrix": [10, 5], "x": 15, "y": 4}, + + {"matrix": [4, 4], "x": 6, "y": 5}, + {"matrix": [4, 5], "x": 7, "y": 5}, + + {"matrix": [10, 0], "x": 9, "y": 5}, + {"matrix": [10, 1], "x": 10, "y": 5}, + + {"matrix": [5, 2], "x": 5, "y": 6, "h": 2}, + {"matrix": [5, 3], "x": 6, "y": 6, "h": 2}, + {"matrix": [5, 5], "x": 7, "y": 6}, + + {"matrix": [11, 0], "x": 9, "y": 6}, + {"matrix": [11, 2], "x": 10, "y": 6, "h": 2}, + {"matrix": [11, 3], "x": 11, "y": 6, "h": 2}, + + {"matrix": [5, 4], "x": 7, "y": 7}, + {"matrix": [11, 1], "x": 9, "y": 7} + ] + } + } +} diff --git a/keyboards/handwired/dactyl_cc/keymaps/default/config.h b/keyboards/handwired/dactyl_cc/keymaps/default/config.h new file mode 100644 index 0000000000..49d5477f0a --- /dev/null +++ b/keyboards/handwired/dactyl_cc/keymaps/default/config.h @@ -0,0 +1,28 @@ +// Copyright 2022 mjohns +// SPDX-License-Identifier: GPL-2.0-or-later + +#pragma once + +/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ +#define LOCKING_SUPPORT_ENABLE + +/* Locking resynchronize hack */ +#define LOCKING_RESYNC_ENABLE + +/* Enables This makes it easier for fast typists to use dual-function keys */ +#define PERMISSIVE_HOLD + +/* mouse config */ +#define MOUSEKEY_DELAY 0 +// Lowering MOUSEKEY_INTERVAL raises the cursor speed significantly, you may want to lower MOUSEKEY_MAX_SPEED (default: 10) +#define MOUSEKEY_INTERVAL 20 +#define MOUSEKEY_MAX_SPEED 7 +#define MOUSEKEY_WHEEL_DELAY 0 + +/* layer config */ +#define TAPPING_TOGGLE 1 + +/* disable action features */ +//#define NO_ACTION_LAYER +//#define NO_ACTION_TAPPING +//#define NO_ACTION_ONESHOT diff --git a/keyboards/handwired/dactyl_cc/keymaps/default/keymap.c b/keyboards/handwired/dactyl_cc/keymaps/default/keymap.c new file mode 100644 index 0000000000..6422699684 --- /dev/null +++ b/keyboards/handwired/dactyl_cc/keymaps/default/keymap.c @@ -0,0 +1,37 @@ +// Copyright 2022 mjohns +// SPDX-License-Identifier: GPL-2.0-or-later + +#include QMK_KEYBOARD_H + +enum layers { + BASE, + NAV +}; + +#define CTL_ESC LCTL_T(KC_ESC) +#define CTL_CAP LCTL_T(KC_CAPS) +#define ALT_BSP LALT_T(KC_BSPC) +#define LT_SCLN LT(NAV, KC_SCLN) + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + [BASE] = LAYOUT( + KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_HOME, + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_BSLS, + CTL_CAP, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, LT_SCLN, KC_QUOT, + KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, + KC_MINS, KC_EQL, KC_LBRC, KC_RBRC, KC_LEFT, KC_DOWN, KC_UP, KC_RGHT, + TT(NAV), KC_DEL, KC_PGUP, KC_RCTL, + KC_BSPC, CTL_ESC, KC_LGUI, KC_PGDN, KC_ENT, KC_SPC, + KC_LALT, KC_RALT + ), + [NAV] = LAYOUT( + QK_BOOT, KC_NO, KC_MPRV, KC_MPLY, KC_MNXT, KC_NO, KC_BRIU, KC_P7, KC_P8, KC_P9, KC_NO, QK_BOOT, + _______, KC_VOLU, KC_WBAK, KC_MS_U, KC_WFWD, KC_WH_U, KC_BRID, KC_P4, KC_P5, KC_P6, KC_PMNS, _______, + _______, KC_VOLD, KC_MS_L, KC_MS_D, KC_MS_R, KC_WH_D, KC_PPLS, KC_P1, KC_P2, KC_P3, KC_PSLS, _______, + KC_NO, KC_F1, KC_F2, KC_F3, KC_F4, KC_NO, KC_PAST, KC_PCMM, KC_P0, KC_PDOT, KC_PENT, _______, + KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, + _______, _______, KC_HOME, _______, + KC_BTN1, KC_BTN2, _______, KC_END, _______, _______, + _______, ALT_BSP + ) +}; diff --git a/keyboards/handwired/dactyl_cc/keymaps/via/config.h b/keyboards/handwired/dactyl_cc/keymaps/via/config.h new file mode 100644 index 0000000000..49d5477f0a --- /dev/null +++ b/keyboards/handwired/dactyl_cc/keymaps/via/config.h @@ -0,0 +1,28 @@ +// Copyright 2022 mjohns +// SPDX-License-Identifier: GPL-2.0-or-later + +#pragma once + +/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ +#define LOCKING_SUPPORT_ENABLE + +/* Locking resynchronize hack */ +#define LOCKING_RESYNC_ENABLE + +/* Enables This makes it easier for fast typists to use dual-function keys */ +#define PERMISSIVE_HOLD + +/* mouse config */ +#define MOUSEKEY_DELAY 0 +// Lowering MOUSEKEY_INTERVAL raises the cursor speed significantly, you may want to lower MOUSEKEY_MAX_SPEED (default: 10) +#define MOUSEKEY_INTERVAL 20 +#define MOUSEKEY_MAX_SPEED 7 +#define MOUSEKEY_WHEEL_DELAY 0 + +/* layer config */ +#define TAPPING_TOGGLE 1 + +/* disable action features */ +//#define NO_ACTION_LAYER +//#define NO_ACTION_TAPPING +//#define NO_ACTION_ONESHOT diff --git a/keyboards/handwired/dactyl_cc/keymaps/via/keymap.c b/keyboards/handwired/dactyl_cc/keymaps/via/keymap.c new file mode 100644 index 0000000000..aad8656a06 --- /dev/null +++ b/keyboards/handwired/dactyl_cc/keymaps/via/keymap.c @@ -0,0 +1,64 @@ +// Copyright 2022 mjohns +// SPDX-License-Identifier: GPL-2.0-or-later + +#include QMK_KEYBOARD_H + +enum layers { + _BASE, + _NAV, + _SYS, + _BLANK +}; + +#define LT_1BSP LT(1, KC_BSPC) +#define LT_2SPC LT(2, KC_SPC) +#define MH_DEL MEH_T(KC_DEL) +#define HY_ENT HYPR_T(KC_ENT) +#define CA_PGDN LCA_T(KC_PGDN) +#define CAG_END LCAG_T(KC_END) +#define AG_PGUP LAG_T(KC_PGUP) +#define CG_HOME MT(MOD_LGUI | MOD_LCTL, KC_HOME) + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + [_BASE] = LAYOUT( + KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_GRV, + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_BSLS, + KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, + KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, + KC_MINS, KC_EQL, KC_LBRC, KC_RBRC, KC_LEFT, KC_DOWN, KC_UP, KC_RGHT, + KC_LCTL, KC_LALT, KC_RGUI, KC_RCTL, + LT_1BSP, MH_DEL, CG_HOME, AG_PGUP, HY_ENT, LT_2SPC, + CAG_END, CA_PGDN + ), + [_NAV] = LAYOUT( + _______, _______, _______, _______, _______, _______, _______, KC_NUM, KC_PEQL, KC_PSLS, KC_PAST, _______, + _______, _______, _______, _______, _______, _______, _______, KC_P7, KC_P8, KC_P9, KC_PMNS, _______, + _______, QK_BOOT, _______, _______, KC_SLEP, _______, _______, KC_P4, KC_P5, KC_P6, KC_PPLS, _______, + _______, _______, _______, _______, _______, _______, _______, KC_P1, KC_P2, KC_P3, KC_PENT, _______, + _______, _______, _______, _______, _______, _______, KC_PDOT, KC_PENT, + _______, _______, _______, KC_P0, + _______, _______, _______, _______, _______, MO(3), + _______, _______ + ), + [_SYS] = LAYOUT( + KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, + _______, KC_VOLU, KC_WBAK, KC_MS_U, KC_WFWD, KC_WH_U, _______, KC_NO, KC_NO, KC_NO, KC_NO, _______, + _______, KC_MUTE, KC_MS_L, KC_MS_D, KC_MS_R, KC_WH_D, _______, KC_PSCR, KC_PAUS, KC_INS, KC_SCRL, _______, + _______, KC_VOLD, KC_MPRV, KC_MPLY, KC_MNXT, KC_MSTP, _______, KC_NO, KC_NO, KC_NO, KC_NO, _______, + _______, _______, _______, _______, _______, _______, KC_UP, KC_RGHT, + _______, _______, _______, _______, + KC_BTN1, KC_BTN2, _______, _______, _______, _______, + _______, _______ + + ), + [_BLANK] = LAYOUT( + KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, + KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, + KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, + KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, + KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, + KC_NO, KC_NO, KC_NO, KC_NO, + KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, + KC_NO, KC_NO + ) +}; diff --git a/keyboards/handwired/dactyl_cc/keymaps/via/rules.mk b/keyboards/handwired/dactyl_cc/keymaps/via/rules.mk new file mode 100644 index 0000000000..1e5b99807c --- /dev/null +++ b/keyboards/handwired/dactyl_cc/keymaps/via/rules.mk @@ -0,0 +1 @@ +VIA_ENABLE = yes diff --git a/keyboards/handwired/dactyl_cc/readme.md b/keyboards/handwired/dactyl_cc/readme.md new file mode 100644 index 0000000000..580539639b --- /dev/null +++ b/keyboards/handwired/dactyl_cc/readme.md @@ -0,0 +1,27 @@ +# Dactyl-CC + + + +Modelled on the *Kinesis Advantage* (KA) 1|2, though missing it's combined function and program row, the *Dactyl CC* retains the finger and thumb key placements of the KA but opts to split board into physical halves. + +* Keyboard Maintainer: [Michael Johns](https://github.com/mjohns) +* Hardware Supported: Pro micro controller or clones of +* Hardware Availability: [Dactyl CC GitHub](https://github.com/mjohns/dactyl-cc) + +Make example for this keyboard (after setting up your build environment): + + make handwired/dactyl_cc:default + +Flashing example for this keyboard: + + make handwired/dactyl_cc:default:flash + +See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). + +## Bootloader + +Enter the bootloader in 3 ways: + +* **Bootmagic reset**: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard +* **Physical reset button**: Briefly press the button on the back of the PCB - some may have pads you must short instead +* **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available diff --git a/keyboards/capsunlocked/cu80/v2_ansi/base/rules.mk b/keyboards/handwired/dactyl_cc/rules.mk index e69de29bb2..e69de29bb2 100644 --- a/keyboards/capsunlocked/cu80/v2_ansi/base/rules.mk +++ b/keyboards/handwired/dactyl_cc/rules.mk diff --git a/keyboards/handwired/dactyl_manuform/4x5/config.h b/keyboards/handwired/dactyl_manuform/4x5/config.h deleted file mode 100644 index 9a4e39dad2..0000000000 --- a/keyboards/handwired/dactyl_manuform/4x5/config.h +++ /dev/null @@ -1,22 +0,0 @@ -/* -Copyright 2012 Jun Wako <wakojun@gmail.com> -Copyright 2015 Jack Humbert - -This program is free software: you can redistribute it and/or modify -it under the terms of the GNU General Public License as published by -the Free Software Foundation, either version 2 of the License, or -(at your option) any later version. - -This program is distributed in the hope that it will be useful, -but WITHOUT ANY WARRANTY; without even the implied warranty of -MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -GNU General Public License for more details. - -You should have received a copy of the GNU General Public License -along with this program. If not, see <http://www.gnu.org/licenses/>. -*/ - -#pragma once - -// WS2812 RGB LED strip input and number of LEDs -#define RGBLED_NUM 12 diff --git a/keyboards/handwired/dactyl_manuform/4x5/info.json b/keyboards/handwired/dactyl_manuform/4x5/info.json index 5fdab01ef4..141bb47717 100644 --- a/keyboards/handwired/dactyl_manuform/4x5/info.json +++ b/keyboards/handwired/dactyl_manuform/4x5/info.json @@ -8,6 +8,9 @@ "pid": "0x3435", "device_version": "0.0.1" }, + "rgblight": { + "led_count": 12 + }, "ws2812": { "pin": "D3" }, diff --git a/keyboards/handwired/dactyl_manuform/4x6/config.h b/keyboards/handwired/dactyl_manuform/4x6/config.h deleted file mode 100644 index 9a4e39dad2..0000000000 --- a/keyboards/handwired/dactyl_manuform/4x6/config.h +++ /dev/null @@ -1,22 +0,0 @@ -/* -Copyright 2012 Jun Wako <wakojun@gmail.com> -Copyright 2015 Jack Humbert - -This program is free software: you can redistribute it and/or modify -it under the terms of the GNU General Public License as published by -the Free Software Foundation, either version 2 of the License, or -(at your option) any later version. - -This program is distributed in the hope that it will be useful, -but WITHOUT ANY WARRANTY; without even the implied warranty of -MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -GNU General Public License for more details. - -You should have received a copy of the GNU General Public License -along with this program. If not, see <http://www.gnu.org/licenses/>. -*/ - -#pragma once - -// WS2812 RGB LED strip input and number of LEDs -#define RGBLED_NUM 12 diff --git a/keyboards/handwired/dactyl_manuform/4x6/info.json b/keyboards/handwired/dactyl_manuform/4x6/info.json index 7de3ef0b0d..5b415fbd2b 100644 --- a/keyboards/handwired/dactyl_manuform/4x6/info.json +++ b/keyboards/handwired/dactyl_manuform/4x6/info.json @@ -8,6 +8,9 @@ "pid": "0x3436", "device_version": "0.0.1" }, + "rgblight": { + "led_count": 12 + }, "ws2812": { "pin": "D3" }, diff --git a/keyboards/handwired/dactyl_manuform/4x6/keymaps/scheikled/keymap.c b/keyboards/handwired/dactyl_manuform/4x6/keymaps/scheikled/keymap.c index 2e92d4b86b..24f6b35f57 100644 --- a/keyboards/handwired/dactyl_manuform/4x6/keymaps/scheikled/keymap.c +++ b/keyboards/handwired/dactyl_manuform/4x6/keymaps/scheikled/keymap.c @@ -60,5 +60,4 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { N_PASTE , N_UNDO , KC_BSPC , KC_DEL ), - }; diff --git a/keyboards/handwired/dactyl_manuform/4x6/keymaps/scheikled/rules.mk b/keyboards/handwired/dactyl_manuform/4x6/keymaps/scheikled/rules.mk index 9991dcad71..53ce5a3190 100644 --- a/keyboards/handwired/dactyl_manuform/4x6/keymaps/scheikled/rules.mk +++ b/keyboards/handwired/dactyl_manuform/4x6/keymaps/scheikled/rules.mk @@ -8,3 +8,4 @@ COMMAND_ENABLE = no NKRO_ENABLE = yes RGBLIGHT_ENABLE = yes DEBOUNCE_TYPE = asym_eager_defer_pk +USER_NAME := scheiklp diff --git a/keyboards/handwired/dactyl_manuform/4x6_5/config.h b/keyboards/handwired/dactyl_manuform/4x6_5/config.h deleted file mode 100644 index 9a4e39dad2..0000000000 --- a/keyboards/handwired/dactyl_manuform/4x6_5/config.h +++ /dev/null @@ -1,22 +0,0 @@ -/* -Copyright 2012 Jun Wako <wakojun@gmail.com> -Copyright 2015 Jack Humbert - -This program is free software: you can redistribute it and/or modify -it under the terms of the GNU General Public License as published by -the Free Software Foundation, either version 2 of the License, or -(at your option) any later version. - -This program is distributed in the hope that it will be useful, -but WITHOUT ANY WARRANTY; without even the implied warranty of -MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -GNU General Public License for more details. - -You should have received a copy of the GNU General Public License -along with this program. If not, see <http://www.gnu.org/licenses/>. -*/ - -#pragma once - -// WS2812 RGB LED strip input and number of LEDs -#define RGBLED_NUM 12 diff --git a/keyboards/handwired/dactyl_manuform/4x6_5/info.json b/keyboards/handwired/dactyl_manuform/4x6_5/info.json index b9ebd6d7df..f54f0d56d2 100644 --- a/keyboards/handwired/dactyl_manuform/4x6_5/info.json +++ b/keyboards/handwired/dactyl_manuform/4x6_5/info.json @@ -8,6 +8,9 @@ "pid": "0x3436", "device_version": "0.0.1" }, + "rgblight": { + "led_count": 12 + }, "ws2812": { "pin": "D3" }, diff --git a/keyboards/handwired/dactyl_manuform/5x6/config.h b/keyboards/handwired/dactyl_manuform/5x6/config.h deleted file mode 100644 index 9a4e39dad2..0000000000 --- a/keyboards/handwired/dactyl_manuform/5x6/config.h +++ /dev/null @@ -1,22 +0,0 @@ -/* -Copyright 2012 Jun Wako <wakojun@gmail.com> -Copyright 2015 Jack Humbert - -This program is free software: you can redistribute it and/or modify -it under the terms of the GNU General Public License as published by -the Free Software Foundation, either version 2 of the License, or -(at your option) any later version. - -This program is distributed in the hope that it will be useful, -but WITHOUT ANY WARRANTY; without even the implied warranty of -MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -GNU General Public License for more details. - -You should have received a copy of the GNU General Public License -along with this program. If not, see <http://www.gnu.org/licenses/>. -*/ - -#pragma once - -// WS2812 RGB LED strip input and number of LEDs -#define RGBLED_NUM 12 diff --git a/keyboards/handwired/dactyl_manuform/5x6/info.json b/keyboards/handwired/dactyl_manuform/5x6/info.json index 89c2c800c6..e6372961d8 100644 --- a/keyboards/handwired/dactyl_manuform/5x6/info.json +++ b/keyboards/handwired/dactyl_manuform/5x6/info.json @@ -8,6 +8,9 @@ "pid": "0x3536", "device_version": "0.0.1" }, + "rgblight": { + "led_count": 12 + }, "ws2812": { "pin": "D3" }, diff --git a/keyboards/handwired/dactyl_manuform/5x7/config.h b/keyboards/handwired/dactyl_manuform/5x7/config.h deleted file mode 100644 index 9a4e39dad2..0000000000 --- a/keyboards/handwired/dactyl_manuform/5x7/config.h +++ /dev/null @@ -1,22 +0,0 @@ -/* -Copyright 2012 Jun Wako <wakojun@gmail.com> -Copyright 2015 Jack Humbert - -This program is free software: you can redistribute it and/or modify -it under the terms of the GNU General Public License as published by -the Free Software Foundation, either version 2 of the License, or -(at your option) any later version. - -This program is distributed in the hope that it will be useful, -but WITHOUT ANY WARRANTY; without even the implied warranty of -MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -GNU General Public License for more details. - -You should have received a copy of the GNU General Public License -along with this program. If not, see <http://www.gnu.org/licenses/>. -*/ - -#pragma once - -// WS2812 RGB LED strip input and number of LEDs -#define RGBLED_NUM 12 diff --git a/keyboards/handwired/dactyl_manuform/5x7/info.json b/keyboards/handwired/dactyl_manuform/5x7/info.json index b166df22a0..68270606cc 100644 --- a/keyboards/handwired/dactyl_manuform/5x7/info.json +++ b/keyboards/handwired/dactyl_manuform/5x7/info.json @@ -8,6 +8,9 @@ "pid": "0x3537", "device_version": "0.0.1" }, + "rgblight": { + "led_count": 12 + }, "ws2812": { "pin": "D3" }, diff --git a/keyboards/handwired/dactyl_manuform/6x6/promicro/config.h b/keyboards/handwired/dactyl_manuform/6x6/promicro/config.h deleted file mode 100644 index 1da1cb9590..0000000000 --- a/keyboards/handwired/dactyl_manuform/6x6/promicro/config.h +++ /dev/null @@ -1,20 +0,0 @@ -/* Copyright 2019 - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see <http://www.gnu.org/licenses/>. - */ - -#pragma once - -// WS2812 RGB LED strip input and number of LEDs -#define RGBLED_NUM 12 diff --git a/keyboards/handwired/dactyl_manuform/6x6/promicro/info.json b/keyboards/handwired/dactyl_manuform/6x6/promicro/info.json index 2b542a15da..245310fd3c 100644 --- a/keyboards/handwired/dactyl_manuform/6x6/promicro/info.json +++ b/keyboards/handwired/dactyl_manuform/6x6/promicro/info.json @@ -7,6 +7,9 @@ "split": { "soft_serial_pin": "D0" }, + "rgblight": { + "led_count": 12 + }, "ws2812": { "pin": "D3" }, diff --git a/keyboards/handwired/dactyl_manuform/6x6_4/config.h b/keyboards/handwired/dactyl_manuform/6x6_4/config.h deleted file mode 100644 index 9a4e39dad2..0000000000 --- a/keyboards/handwired/dactyl_manuform/6x6_4/config.h +++ /dev/null @@ -1,22 +0,0 @@ -/* -Copyright 2012 Jun Wako <wakojun@gmail.com> -Copyright 2015 Jack Humbert - -This program is free software: you can redistribute it and/or modify -it under the terms of the GNU General Public License as published by -the Free Software Foundation, either version 2 of the License, or -(at your option) any later version. - -This program is distributed in the hope that it will be useful, -but WITHOUT ANY WARRANTY; without even the implied warranty of -MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -GNU General Public License for more details. - -You should have received a copy of the GNU General Public License -along with this program. If not, see <http://www.gnu.org/licenses/>. -*/ - -#pragma once - -// WS2812 RGB LED strip input and number of LEDs -#define RGBLED_NUM 12 diff --git a/keyboards/handwired/dactyl_manuform/6x6_4/info.json b/keyboards/handwired/dactyl_manuform/6x6_4/info.json index 567057cf08..955060de7a 100644 --- a/keyboards/handwired/dactyl_manuform/6x6_4/info.json +++ b/keyboards/handwired/dactyl_manuform/6x6_4/info.json @@ -8,6 +8,9 @@ "pid": "0x3636", "device_version": "0.0.1" }, + "rgblight": { + "led_count": 12 + }, "ws2812": { "pin": "D3" }, diff --git a/keyboards/handwired/dactyl_manuform/6x6_kinesis/config.h b/keyboards/handwired/dactyl_manuform/6x6_kinesis/config.h deleted file mode 100644 index 9a4e39dad2..0000000000 --- a/keyboards/handwired/dactyl_manuform/6x6_kinesis/config.h +++ /dev/null @@ -1,22 +0,0 @@ -/* -Copyright 2012 Jun Wako <wakojun@gmail.com> -Copyright 2015 Jack Humbert - -This program is free software: you can redistribute it and/or modify -it under the terms of the GNU General Public License as published by -the Free Software Foundation, either version 2 of the License, or -(at your option) any later version. - -This program is distributed in the hope that it will be useful, -but WITHOUT ANY WARRANTY; without even the implied warranty of -MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -GNU General Public License for more details. - -You should have received a copy of the GNU General Public License -along with this program. If not, see <http://www.gnu.org/licenses/>. -*/ - -#pragma once - -// WS2812 RGB LED strip input and number of LEDs -#define RGBLED_NUM 12 diff --git a/keyboards/handwired/dactyl_manuform/6x6_kinesis/info.json b/keyboards/handwired/dactyl_manuform/6x6_kinesis/info.json index 8f14c5049e..3dd74aa3f6 100644 --- a/keyboards/handwired/dactyl_manuform/6x6_kinesis/info.json +++ b/keyboards/handwired/dactyl_manuform/6x6_kinesis/info.json @@ -8,6 +8,9 @@ "pid": "0x3636", "device_version": "0.0.1" }, + "rgblight": { + "led_count": 12 + }, "ws2812": { "pin": "D3" }, diff --git a/keyboards/handwired/dactyl_manuform/6x7/config.h b/keyboards/handwired/dactyl_manuform/6x7/config.h deleted file mode 100644 index 9a4e39dad2..0000000000 --- a/keyboards/handwired/dactyl_manuform/6x7/config.h +++ /dev/null @@ -1,22 +0,0 @@ -/* -Copyright 2012 Jun Wako <wakojun@gmail.com> -Copyright 2015 Jack Humbert - -This program is free software: you can redistribute it and/or modify -it under the terms of the GNU General Public License as published by -the Free Software Foundation, either version 2 of the License, or -(at your option) any later version. - -This program is distributed in the hope that it will be useful, -but WITHOUT ANY WARRANTY; without even the implied warranty of -MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -GNU General Public License for more details. - -You should have received a copy of the GNU General Public License -along with this program. If not, see <http://www.gnu.org/licenses/>. -*/ - -#pragma once - -// WS2812 RGB LED strip input and number of LEDs -#define RGBLED_NUM 12 diff --git a/keyboards/handwired/dactyl_manuform/6x7/info.json b/keyboards/handwired/dactyl_manuform/6x7/info.json index ea983da9c8..529d92bd3f 100644 --- a/keyboards/handwired/dactyl_manuform/6x7/info.json +++ b/keyboards/handwired/dactyl_manuform/6x7/info.json @@ -8,21 +8,35 @@ "pid": "0x3636", "device_version": "0.0.1" }, + "features": { + "bootmagic": true, + "command": true, + "console": false, + "extrakey": true, + "mousekey": true, + "nkro": false, + "audio": false, + "backlight": false, + "rgblight": false + }, "ws2812": { "pin": "D3" }, "matrix_pins": { - "cols": ["D4", "C6", "D7", "E6", "B4", "B5", "B7"], + "cols": ["D4", "C6", "D7", "E6", "B4", "B5", "D1"], "rows": ["F5", "F6", "F7", "B1", "B3", "B2", "B6"] }, "diode_direction": "COL2ROW", "split": { + "enabled": true, "soft_serial_pin": "D0" }, - "processor": "atmega32u4", - "bootloader": "caterina", + "rgblight": { + "led_count": 12 + }, + "development_board": "promicro", "layouts": { - "LAYOUT_6x7": { + "LAYOUT": { "layout": [ {"matrix": [0, 0], "x": 0, "y": 0}, {"matrix": [0, 1], "x": 1, "y": 0}, diff --git a/keyboards/handwired/dactyl_manuform/6x7/keymaps/default/keymap.c b/keyboards/handwired/dactyl_manuform/6x7/keymaps/default/keymap.c index 83fab9409d..5653786dcf 100644 --- a/keyboards/handwired/dactyl_manuform/6x7/keymaps/default/keymap.c +++ b/keyboards/handwired/dactyl_manuform/6x7/keymaps/default/keymap.c @@ -12,7 +12,7 @@ enum custom_layer { #define LOWER MO(_LOWER) const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { - [_QWERTY] = LAYOUT_6x7( + [_QWERTY] = LAYOUT( KC_ESC , KC_F1 , KC_F2 , KC_F3 , KC_F4 , KC_F5 , KC_F6 , KC_F7 , KC_F8 , KC_F9 , KC_F10, KC_F11, KC_F12 , _______, _______, KC_GRV , KC_1 , KC_2 , KC_3 , KC_4 , KC_5 , KC_6 , KC_7 , KC_8 , KC_9 , KC_0 , KC_LBRC , KC_RBRC, _______, KC_TAB , KC_Q , KC_W , KC_E , KC_R , KC_T , KC_Y , KC_U , KC_I , KC_O , KC_P , KC_QUOT , KC_BSLS, @@ -24,7 +24,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { KC_BSPC,KC_GRV, KC_LGUI, KC_LALT ), - [_LOWER] = LAYOUT_6x7( + [_LOWER] = LAYOUT( KC_ESC , KC_F1 , KC_F2 , KC_F3 , KC_F4 , KC_F5 , KC_F6 , KC_F7 , KC_F8 , KC_F9 ,KC_F10 ,KC_F11 ,KC_F12 , _______, _______, KC_TILD,KC_EXLM, KC_AT ,KC_HASH,KC_DLR ,KC_PERC, KC_CIRC,KC_AMPR,KC_ASTR,KC_LPRN,KC_RPRN,KC_DEL , _______, _______, _______,_______,_______,_______,_______,KC_LBRC, KC_RBRC, KC_P7 , KC_P8 , KC_P9 ,_______,KC_PLUS, _______, @@ -36,7 +36,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { _______,_______, _______,_______ ), - [_RAISE] = LAYOUT_6x7( + [_RAISE] = LAYOUT( _______,KC_F12 , KC_F1 , KC_F2 , KC_F3 , KC_F4 , KC_F5 , KC_F6 , KC_F7 , KC_F8 , KC_F9 ,KC_F10 ,KC_F11 , _______, _______,_______,_______,_______,_______,_______,KC_LBRC, KC_RBRC,_______,KC_NUM ,KC_INS ,KC_SCRL,KC_MUTE, _______, _______,_______,KC_LEFT,KC_UP ,KC_DOWN,KC_RGHT,KC_LPRN, KC_RPRN,KC_MPRV,KC_MPLY,KC_MNXT,_______,KC_VOLU, _______, diff --git a/keyboards/handwired/dactyl_manuform/6x7/keymaps/iso-de/keymap.c b/keyboards/handwired/dactyl_manuform/6x7/keymaps/iso-de/keymap.c index 0e8436788e..dbbc54cdca 100644 --- a/keyboards/handwired/dactyl_manuform/6x7/keymaps/iso-de/keymap.c +++ b/keyboards/handwired/dactyl_manuform/6x7/keymaps/iso-de/keymap.c @@ -10,7 +10,7 @@ enum custom_layer { #define RAISE MO(_RAISE) const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { - [_QWERTZ] = LAYOUT_6x7( + [_QWERTZ] = LAYOUT( KC_ESC , KC_F1 , KC_F2 , KC_F3 , KC_F4 , KC_F5 , KC_F6 , KC_F7 , KC_F8 , KC_F9 , KC_F10 , KC_F11 , KC_F12 , KC_HOME, KC_GRV , KC_1 , KC_2 , KC_3 , KC_4 , KC_5 , KC_6 , KC_7 , KC_8 , KC_9 , KC_0 , KC_MINS, KC_EQL , KC_END , XXXXXXX, KC_TAB , KC_Q , KC_W , KC_E , KC_R , KC_T , KC_Y , KC_U , KC_I , KC_O , KC_P , KC_LBRC, KC_RBRC, @@ -18,12 +18,11 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { KC_LCTL, KC_NUBS, KC_Z , KC_X , KC_C , KC_V , KC_B , KC_N , KC_M , KC_COMM, KC_DOT , KC_SLSH, KC_RSFT, KC_MPLY, KC_LEFT, KC_RGHT, KC_UP , KC_DOWN, KC_SPC , KC_LSFT, KC_RALT, KC_ENT , - KC_LGUI, KC_LALT, KC_BSPC, KC_DEL , KC_PGDN, KC_PGUP, KC_TAB , KC_INS ), - [_RAISE] = LAYOUT_6x7( + [_RAISE] = LAYOUT( QK_BOOT, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, @@ -31,7 +30,6 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_MPRV, KC_MNXT, KC_VOLU, KC_VOLD, _______, _______, _______, _______, - _______, _______, _______, _______, _______, _______, _______, _______ ) diff --git a/keyboards/handwired/dactyl_manuform/6x7/rules.mk b/keyboards/handwired/dactyl_manuform/6x7/rules.mk index b893863bb5..e69de29bb2 100644 --- a/keyboards/handwired/dactyl_manuform/6x7/rules.mk +++ b/keyboards/handwired/dactyl_manuform/6x7/rules.mk @@ -1,13 +0,0 @@ -# Build Options -# change yes to no to disable -# -BOOTMAGIC_ENABLE = no # Enable Bootmagic Lite -MOUSEKEY_ENABLE = yes # Mouse keys -EXTRAKEY_ENABLE = yes # Audio control and System control -CONSOLE_ENABLE = no # Console for debug -COMMAND_ENABLE = yes # Commands for debug and configuration -NKRO_ENABLE = no # Enable N-Key Rollover -BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality -RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow -AUDIO_ENABLE = no # Audio output -SPLIT_KEYBOARD = yes diff --git a/keyboards/handwired/dactyl_manuform/dmote/62key/config.h b/keyboards/handwired/dactyl_manuform/dmote/62key/config.h index 41af664c25..584db341d6 100644 --- a/keyboards/handwired/dactyl_manuform/dmote/62key/config.h +++ b/keyboards/handwired/dactyl_manuform/dmote/62key/config.h @@ -5,5 +5,3 @@ #define RGBLIGHT_EFFECT_KNIGHT_LENGTH 2 #define RGBLIGHT_EFFECT_CHRISTMAS #define RGBLIGHT_EFFECT_CHRISTMAS_STEP 1 -#define RGBLED_NUM 6 // Used when chaining strips -#define RGBLED_SPLIT { 3, 3 } // Used when not chaining strips diff --git a/keyboards/handwired/dactyl_manuform/dmote/62key/info.json b/keyboards/handwired/dactyl_manuform/dmote/62key/info.json index c2a818bde2..99e1739d20 100644 --- a/keyboards/handwired/dactyl_manuform/dmote/62key/info.json +++ b/keyboards/handwired/dactyl_manuform/dmote/62key/info.json @@ -10,6 +10,10 @@ "pid": "0x3632", "device_version": "0.0.1" }, + "rgblight": { + "led_count": 6, + "split_count": [3, 3] + }, "ws2812": { "pin": "D1" }, diff --git a/keyboards/handwired/dactyl_promicro/config.h b/keyboards/handwired/dactyl_promicro/config.h index ab6beb807f..543ef8e6c5 100644 --- a/keyboards/handwired/dactyl_promicro/config.h +++ b/keyboards/handwired/dactyl_promicro/config.h @@ -33,8 +33,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. /* Enables This makes it easier for fast typists to use dual-function keys */ #define PERMISSIVE_HOLD -#define RGBLED_NUM 12 // Number of LEDs - /* * Feature disable options * These options are also useful to firmware size reduction. diff --git a/keyboards/handwired/dactyl_promicro/info.json b/keyboards/handwired/dactyl_promicro/info.json index 5f0b4f85a2..2ae20d2f4a 100644 --- a/keyboards/handwired/dactyl_promicro/info.json +++ b/keyboards/handwired/dactyl_promicro/info.json @@ -16,6 +16,9 @@ "split": { "soft_serial_pin": "D0" }, + "rgblight": { + "led_count": 12 + }, "ws2812": { "pin": "D3" }, diff --git a/keyboards/handwired/dactyl_rah/config.h b/keyboards/handwired/dactyl_rah/config.h index e40f6dfc69..107d8e1668 100644 --- a/keyboards/handwired/dactyl_rah/config.h +++ b/keyboards/handwired/dactyl_rah/config.h @@ -24,9 +24,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #define MOUSEKEY_MAX_SPEED 7 #define MOUSEKEY_WHEEL_DELAY 0 -/* layer config */ -#define TAPPING_TOGGLE 1 - /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ #define LOCKING_SUPPORT_ENABLE diff --git a/keyboards/handwired/dactyl_rah/info.json b/keyboards/handwired/dactyl_rah/info.json index 9234536a23..bfacb99a4b 100644 --- a/keyboards/handwired/dactyl_rah/info.json +++ b/keyboards/handwired/dactyl_rah/info.json @@ -18,6 +18,9 @@ }, "processor": "atmega32u4", "bootloader": "caterina", + "tapping": { + "toggle": 1 + }, "layouts": { "LAYOUT_6x6": { "layout": [ diff --git a/keyboards/handwired/dactylmacropad/config.h b/keyboards/handwired/dactylmacropad/config.h deleted file mode 100644 index a2a5455ab1..0000000000 --- a/keyboards/handwired/dactylmacropad/config.h +++ /dev/null @@ -1,22 +0,0 @@ -// Copyright 2022 bwprobably -// SPDX-License-Identifier: GPL-2.0-or-later - -#pragma once - -/* - * Feature disable options - * These options are also useful to firmware size reduction. - */ - -/* disable debug print */ -//#define NO_DEBUG - -/* disable print */ -//#define NO_PRINT - -/* disable action features */ -//#define NO_ACTION_LAYER -//#define NO_ACTION_TAPPING -//#define NO_ACTION_ONESHOT - -#define TAP_CODE_DELAY 100 diff --git a/keyboards/handwired/dactylmacropad/info.json b/keyboards/handwired/dactylmacropad/info.json index 6744d4b701..5d40a240a9 100644 --- a/keyboards/handwired/dactylmacropad/info.json +++ b/keyboards/handwired/dactylmacropad/info.json @@ -28,6 +28,9 @@ {"pin_a": "D1", "pin_b": "D0"} ] }, + "qmk": { + "tap_keycode_delay": 100 + }, "layouts": { "LAYOUT": { "layout": [ diff --git a/keyboards/handwired/daishi/config.h b/keyboards/handwired/daishi/config.h deleted file mode 100644 index 2e6498ab5d..0000000000 --- a/keyboards/handwired/daishi/config.h +++ /dev/null @@ -1,21 +0,0 @@ -/* -Copyright 2019 Crokto - -This program is free software: you can redistribute it and/or modify -it under the terms of the GNU General Public License as published by -the Free Software Foundation, either version 2 of the License, or -(at your option) any later version. - -This program is distributed in the hope that it will be useful, -but WITHOUT ANY WARRANTY; without even the implied warranty of -MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -GNU General Public License for more details. - -You should have received a copy of the GNU General Public License -along with this program. If not, see <http://www.gnu.org/licenses/>. -*/ - -#pragma once - -/* Set delay for tap_code on rotary encoder */ -#define TAP_CODE_DELAY 10 diff --git a/keyboards/handwired/daishi/info.json b/keyboards/handwired/daishi/info.json index 37d80633a7..6b6508eb83 100644 --- a/keyboards/handwired/daishi/info.json +++ b/keyboards/handwired/daishi/info.json @@ -18,6 +18,9 @@ {"pin_a": "F1", "pin_b": "F0", "resolution": 2} ] }, + "qmk": { + "tap_keycode_delay": 10 + }, "processor": "at90usb1286", "bootloader": "atmel-dfu", "layouts": { diff --git a/keyboards/handwired/datahand/config.h b/keyboards/handwired/datahand/config.h index 0b2de61490..b1d8cc9c77 100644 --- a/keyboards/handwired/datahand/config.h +++ b/keyboards/handwired/datahand/config.h @@ -20,8 +20,6 @@ #define MATRIX_ROWS 13 #define MATRIX_COLS 4 -//#define DIODE_DIRECTION - /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ #define LOCKING_SUPPORT_ENABLE /* Locking resynchronize hack */ diff --git a/keyboards/handwired/datahand/keymaps/default/keymap.c b/keyboards/handwired/datahand/keymaps/default/keymap.c index 7ebcff366f..608c45dea3 100644 --- a/keyboards/handwired/datahand/keymaps/default/keymap.c +++ b/keyboards/handwired/datahand/keymaps/default/keymap.c @@ -302,8 +302,9 @@ void matrix_init_user(void) { #endif } -void led_set_user(uint8_t usb_led) { - lock_led_set(usb_led & (1<<USB_LED_NUM_LOCK), LED_NUM_LOCK); - lock_led_set(usb_led & (1<<USB_LED_CAPS_LOCK), LED_CAPS_LOCK); - lock_led_set(usb_led & (1<<USB_LED_SCROLL_LOCK), LED_SCROLL_LOCK); +bool led_update_user(led_t led_state) { + lock_led_set(led_state.num_lock, LED_NUM_LOCK); + lock_led_set(led_state.caps_lock, LED_CAPS_LOCK); + lock_led_set(led_state.scroll_lock, LED_SCROLL_LOCK); + return false; } diff --git a/keyboards/handwired/ergocheap/config.h b/keyboards/handwired/ergocheap/config.h index 4458922746..23b6e9bad9 100644 --- a/keyboards/handwired/ergocheap/config.h +++ b/keyboards/handwired/ergocheap/config.h @@ -17,7 +17,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #pragma once -#define TAPPING_TERM 500 #define PERMISSIVE_HOLD /* diff --git a/keyboards/handwired/ergocheap/info.json b/keyboards/handwired/ergocheap/info.json index 12bff57b3e..17d7863237 100644 --- a/keyboards/handwired/ergocheap/info.json +++ b/keyboards/handwired/ergocheap/info.json @@ -8,6 +8,9 @@ "pid": "0x6942", "device_version": "0.0.1" }, + "tapping": { + "term": 500 + }, "matrix_pins": { "cols": ["A8", "A9", "B14", "B12", "B13", "B15", "B3", "B11", "A4", "A5", "A6", "A7", "B0", "B1", "B10"], "rows": ["B5", "B6", "B7", "B9", "B8"] diff --git a/keyboards/handwired/ergocheap/rules.mk b/keyboards/handwired/ergocheap/rules.mk index 2c8f1f42bf..10c9a692df 100644 --- a/keyboards/handwired/ergocheap/rules.mk +++ b/keyboards/handwired/ergocheap/rules.mk @@ -1,5 +1,3 @@ -# Enter lower-power sleep mode when on the ChibiOS idle thread -OPT_DEFS += -DCORTEX_ENABLE_WFI_IDLE=TRUE # Build Options # change yes to no to disable diff --git a/keyboards/handwired/frenchdev/config.h b/keyboards/handwired/frenchdev/config.h index 9cb309c78f..d758c60239 100644 --- a/keyboards/handwired/frenchdev/config.h +++ b/keyboards/handwired/frenchdev/config.h @@ -31,10 +31,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #define MOUSEKEY_MAX_SPEED 2 #define MOUSEKEY_WHEEL_DELAY 0 -#define TAPPING_TOGGLE 1 - -#define TAPPING_TERM 200 - /* key combination for command */ #define IS_COMMAND() ( \ get_mods() == (MOD_BIT(KC_LCTL) | MOD_BIT(KC_RCTL)) || \ diff --git a/keyboards/handwired/frenchdev/info.json b/keyboards/handwired/frenchdev/info.json index d5981aebd4..47c8199cd3 100644 --- a/keyboards/handwired/frenchdev/info.json +++ b/keyboards/handwired/frenchdev/info.json @@ -9,6 +9,9 @@ }, "processor": "atmega32u4", "bootloader": "halfkay", + "tapping": { + "toggle": 1 + }, "layouts": { "LAYOUT": { "layout": [ diff --git a/keyboards/handwired/frenchdev/keymaps/default/keymap.c b/keyboards/handwired/frenchdev/keymaps/default/keymap.c index e5a5dcc6c1..60e355f290 100644 --- a/keyboards/handwired/frenchdev/keymaps/default/keymap.c +++ b/keyboards/handwired/frenchdev/keymaps/default/keymap.c @@ -351,11 +351,11 @@ bool process_record_user(uint16_t keycode, keyrecord_t *record) { return true; } -void led_set_user(uint8_t usb_led) { - if (usb_led & (1<<USB_LED_CAPS_LOCK)){ +bool led_update_user(led_t led_state) { + if (led_state.caps_lock){ frenchdev_led_3_on(); } else { frenchdev_led_3_off(); } - return ; + return false; } diff --git a/keyboards/handwired/freoduo/config.h b/keyboards/handwired/freoduo/config.h index 232d5638eb..7ee7aeb3b9 100644 --- a/keyboards/handwired/freoduo/config.h +++ b/keyboards/handwired/freoduo/config.h @@ -18,14 +18,7 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #define EE_HANDS /* ws2812 RGB LED */ -#if !defined(RGBLED_NUM) -# define RGBLED_NUM 30 -# define RGBLIGHT_SPLIT -# define RGBLED_SPLIT { 16, 14 } -// Switch RGB sides with LED MAP. -# define RGBLIGHT_LED_MAP { 15, 14, 13, 12, 11, 10, 9, 8, 7, 6, 5, 4, 3, 2, 1, 0, 16, 17, 18, 19, 20, 21, 22, 23, 24, 25, 26, 27, 28, 29, 30} # define RGBLIGHT_LAYERS -#endif #define RGBLIGHT_EFFECT_BREATHING #define RGBLIGHT_EFFECT_RAINBOW_MOOD #define RGBLIGHT_EFFECT_RAINBOW_SWIRL @@ -36,7 +29,3 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #define RGBLIGHT_EFFECT_RGB_TEST #define RGBLIGHT_EFFECT_ALTERNATING #define RGBLIGHT_EFFECT_TWINKLE -#define RGBLIGHT_SLEEP -#define RGBLIGHT_HUE_STEP 16 -#define RGBLIGHT_SAT_STEP 8 -#define RGBLIGHT_VAL_STEP 8 diff --git a/keyboards/handwired/freoduo/info.json b/keyboards/handwired/freoduo/info.json index 5ddf21ee79..9628157477 100644 --- a/keyboards/handwired/freoduo/info.json +++ b/keyboards/handwired/freoduo/info.json @@ -16,6 +16,15 @@ "split": { "soft_serial_pin": "D0" }, +"rgblight": { + "hue_steps": 16, + "saturation_steps": 8, + "brightness_steps": 8, + "led_count": 30, + "sleep": true, + "led_map": [15, 14, 13, 12, 11, 10, 9, 8, 7, 6, 5, 4, 3, 2, 1, 0, 16, 17, 18, 19, 20, 21, 22, 23, 24, 25, 26, 27, 28, 29, 30], + "split_count": [16, 14] +}, "ws2812": { "pin": "D4" }, diff --git a/keyboards/handwired/heisenberg/config.h b/keyboards/handwired/heisenberg/config.h index 00362c5375..470d116348 100644 --- a/keyboards/handwired/heisenberg/config.h +++ b/keyboards/handwired/heisenberg/config.h @@ -17,11 +17,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #pragma once - #define RGBLED_NUM 6 -// #define RGBLIGHT_HUE_STEP 8 -// #define RGBLIGHT_SAT_STEP 8 -// #define RGBLIGHT_VAL_STEP 8 -// #define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */ #define RGBLIGHT_EFFECT_BREATHING #define RGBLIGHT_EFFECT_RAINBOW_MOOD #define RGBLIGHT_EFFECT_RAINBOW_SWIRL @@ -47,9 +42,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. * Heisenberg-specific definitions END */ - -#define TAPPING_TERM 200 - /* * Feature disable options * These options are also useful to firmware size reduction. diff --git a/keyboards/handwired/heisenberg/info.json b/keyboards/handwired/heisenberg/info.json index 5b3e000fba..246171e696 100644 --- a/keyboards/handwired/heisenberg/info.json +++ b/keyboards/handwired/heisenberg/info.json @@ -8,6 +8,9 @@ "pid": "0x0000", "device_version": "0.0.1" }, + "rgblight": { + "led_count": 6 + }, "ws2812": { "pin": "D4" }, diff --git a/keyboards/handwired/jopr/config.h b/keyboards/handwired/jopr/config.h index 5d5233ca99..59717346c3 100644 --- a/keyboards/handwired/jopr/config.h +++ b/keyboards/handwired/jopr/config.h @@ -7,9 +7,3 @@ #define LOCKING_RESYNC_ENABLE #define NO_ACTION_ONESHOT -#define TAPPING_TOGGLE 3 - -#define RGBLED_NUM 1 -#define RGBLIGHT_HUE_STEP 1 -#define RGBLIGHT_SAT_STEP 1 -#define RGBLIGHT_VAL_STEP 1 diff --git a/keyboards/handwired/jopr/info.json b/keyboards/handwired/jopr/info.json index efebe52d0b..78fb52cb99 100644 --- a/keyboards/handwired/jopr/info.json +++ b/keyboards/handwired/jopr/info.json @@ -8,6 +8,12 @@ "pid": "0x1000", "device_version": "0.0.1" }, + "rgblight": { + "hue_steps": 1, + "saturation_steps": 1, + "brightness_steps": 1, + "led_count": 1 + }, "ws2812": { "pin": "F4" }, @@ -18,6 +24,9 @@ "diode_direction": "COL2ROW", "processor": "atmega32u4", "bootloader": "atmel-dfu", + "tapping": { + "toggle": 3 + }, "layouts": { "LAYOUT": { "layout": [ diff --git a/keyboards/handwired/jopr/keymaps/default/keymap.c b/keyboards/handwired/jopr/keymaps/default/keymap.c index 1dc0f3a59e..fc615b0109 100644 --- a/keyboards/handwired/jopr/keymaps/default/keymap.c +++ b/keyboards/handwired/jopr/keymaps/default/keymap.c @@ -22,23 +22,24 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { ) }; -void led_set_user(uint8_t usb_led) { +bool led_update_user(led_t led_state) { - if (IS_LED_ON(usb_led, USB_LED_CAPS_LOCK)) { + if (led_state.caps_lock) { writePinHigh(F1); } else { writePinLow(F1); } - if (IS_LED_ON(usb_led, USB_LED_SCROLL_LOCK)) { + if (led_state.scroll_lock) { writePinHigh(F0); } else { writePinLow(F0); } - if (!(IS_LED_ON(usb_led, USB_LED_NUM_LOCK))) { + if (!led_state.num_lock) { tap_code(KC_NUM_LOCK); } + return false; } bool process_record_user(uint16_t keycode, keyrecord_t *record) { static bool sysreq_led = false; diff --git a/keyboards/handwired/jopr/keymaps/modded_white/keymap.c b/keyboards/handwired/jopr/keymaps/modded_white/keymap.c index edaabe78e6..69d1a56bb5 100644 --- a/keyboards/handwired/jopr/keymaps/modded_white/keymap.c +++ b/keyboards/handwired/jopr/keymaps/modded_white/keymap.c @@ -22,23 +22,24 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { ) }; -void led_set_user(uint8_t usb_led) { +bool led_update_user(led_t led_state) { - if (IS_LED_ON(usb_led, USB_LED_CAPS_LOCK)) { + if (led_state.caps_lock) { writePinHigh(F1); } else { writePinLow(F1); } - if (IS_LED_ON(usb_led, USB_LED_SCROLL_LOCK)) { + if (led_state.scroll_lock) { writePinHigh(F0); } else { writePinLow(F0); } - if (!(IS_LED_ON(usb_led, USB_LED_NUM_LOCK))) { + if (!led_state.num_lock) { tap_code(KC_NUM_LOCK); } + return false; } bool process_record_user(uint16_t keycode, keyrecord_t *record) { static bool sysreq_led = false; diff --git a/keyboards/handwired/k_numpad17/config.h b/keyboards/handwired/k_numpad17/config.h index 9bcc1ca12e..9f71a07f90 100644 --- a/keyboards/handwired/k_numpad17/config.h +++ b/keyboards/handwired/k_numpad17/config.h @@ -17,9 +17,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #pragma once - -#define TAPPING_TERM 400 - /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ #define LOCKING_SUPPORT_ENABLE /* Locking resynchronize hack */ diff --git a/keyboards/handwired/k_numpad17/info.json b/keyboards/handwired/k_numpad17/info.json index e0cd79a9c0..97d5f38774 100644 --- a/keyboards/handwired/k_numpad17/info.json +++ b/keyboards/handwired/k_numpad17/info.json @@ -8,6 +8,9 @@ "pid": "0x6060", "device_version": "0.0.1" }, + "tapping": { + "term": 400 + }, "matrix_pins": { "cols": ["B2", "B1", "F6", "F4"], "rows": ["D1", "D4", "C6", "D7", "E6"] diff --git a/keyboards/handwired/kbod/config.h b/keyboards/handwired/kbod/config.h index f952881772..b9449c4714 100644 --- a/keyboards/handwired/kbod/config.h +++ b/keyboards/handwired/kbod/config.h @@ -37,5 +37,3 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. //#define NO_ACTION_LAYER //#define NO_ACTION_TAPPING //#define NO_ACTION_ONESHOT - -#define TAPPING_TOGGLE 2 diff --git a/keyboards/handwired/kbod/info.json b/keyboards/handwired/kbod/info.json index 6508b3d859..69005c6579 100644 --- a/keyboards/handwired/kbod/info.json +++ b/keyboards/handwired/kbod/info.json @@ -18,6 +18,9 @@ }, "processor": "atmega32u4", "bootloader": "caterina", + "tapping": { + "toggle": 2 + }, "layouts": { "LAYOUT": { "layout": [ diff --git a/keyboards/handwired/lovelive9/config.h b/keyboards/handwired/lovelive9/config.h index a946442dc0..547baa54c2 100644 --- a/keyboards/handwired/lovelive9/config.h +++ b/keyboards/handwired/lovelive9/config.h @@ -2,8 +2,6 @@ #pragma once -#define RGBLED_NUM 9 // Number of LEDs - #define RGBLIGHT_EFFECT_BREATHING #define RGBLIGHT_EFFECT_RAINBOW_MOOD #define RGBLIGHT_EFFECT_RAINBOW_SWIRL @@ -15,8 +13,3 @@ #define RGBLIGHT_EFFECT_ALTERNATING #define RGBLIGHT_EFFECT_TWINKLE #define RGBLIGHT_EFFECT_SNAKE_LENGTH 4 -#define RGBLIGHT_HUE_STEP 10 -#define RGBLIGHT_SAT_STEP 17 -#define RGBLIGHT_VAL_STEP 17 - -#define TAPPING_TERM 200 diff --git a/keyboards/handwired/lovelive9/info.json b/keyboards/handwired/lovelive9/info.json index 4000b543c3..893db7f9da 100644 --- a/keyboards/handwired/lovelive9/info.json +++ b/keyboards/handwired/lovelive9/info.json @@ -17,6 +17,10 @@ "backlight": { "breathing_period": 2 }, + "rgblight": { + "hue_steps": 10, + "led_count": 9 + }, "ws2812": { "pin": "D3" }, diff --git a/keyboards/handwired/macroboard/config.h b/keyboards/handwired/macroboard/config.h index d20625da08..e019e4251a 100644 --- a/keyboards/handwired/macroboard/config.h +++ b/keyboards/handwired/macroboard/config.h @@ -23,13 +23,7 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #define WS2812_DMA_STREAM STM32_DMA1_STREAM6 // DMA Stream for TIMx_UP, see the respective reference manual for the appropriate values for your MCU. #define WS2812_DMA_CHANNEL 2 // DMA Channel for TIMx_UP, see the respective reference manual for the appropriate values for your MCU. #define WS2812_PWM_TARGET_PERIOD 800000 -#define RGBLIGHT_LED_MAP { 0, 2, 4, 6, 8, 10, 12, 14, 16, 18, 20, 22, 23, 21, 19, 17, 15, 13, 11, 9, 7, 5, 3, 1 } -# define RGBLED_NUM 24 -# define RGBLIGHT_HUE_STEP 8 -# define RGBLIGHT_SAT_STEP 8 -# define RGBLIGHT_VAL_STEP 8 -# define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */ # define RGBLIGHT_EFFECT_BREATHING # define RGBLIGHT_EFFECT_RAINBOW_MOOD # define RGBLIGHT_EFFECT_RAINBOW_SWIRL diff --git a/keyboards/handwired/macroboard/info.json b/keyboards/handwired/macroboard/info.json index b82cee4fb5..493e6981f7 100644 --- a/keyboards/handwired/macroboard/info.json +++ b/keyboards/handwired/macroboard/info.json @@ -8,6 +8,13 @@ "pid": "0x2137", "device_version": "0.0.1" }, + "rgblight": { + "saturation_steps": 8, + "brightness_steps": 8, + "led_count": 24, + "sleep": true, + "led_map": [0, 2, 4, 6, 8, 10, 12, 14, 16, 18, 20, 22, 23, 21, 19, 17, 15, 13, 11, 9, 7, 5, 3, 1] + }, "ws2812": { "pin": "B9" }, diff --git a/keyboards/handwired/marauder/config.h b/keyboards/handwired/marauder/config.h index bdb092a3ae..9d56df98e1 100644 --- a/keyboards/handwired/marauder/config.h +++ b/keyboards/handwired/marauder/config.h @@ -17,9 +17,3 @@ #pragma once #define LAYER_STATE_8BIT - - #define RGBLED_NUM 7 - #define RGBLIGHT_HUE_STEP 8 - #define RGBLIGHT_SAT_STEP 8 - #define RGBLIGHT_VAL_STEP 8 - #define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */ diff --git a/keyboards/handwired/marauder/info.json b/keyboards/handwired/marauder/info.json index a4bab13284..5c17825a63 100644 --- a/keyboards/handwired/marauder/info.json +++ b/keyboards/handwired/marauder/info.json @@ -8,6 +8,12 @@ "pid": "0x0001", "device_version": "0.0.1" }, + "rgblight": { + "saturation_steps": 8, + "brightness_steps": 8, + "led_count": 7, + "sleep": true + }, "ws2812": { "pin": "D3" }, diff --git a/keyboards/handwired/minorca/keymaps/ridingqwerty/keymap.c b/keyboards/handwired/minorca/keymaps/ridingqwerty/keymap.c index 7d541270fb..26e6fc630c 100644 --- a/keyboards/handwired/minorca/keymaps/ridingqwerty/keymap.c +++ b/keyboards/handwired/minorca/keymaps/ridingqwerty/keymap.c @@ -59,9 +59,9 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { }, #ifdef UNICODE_H [_RUNE] = { - {KC_ESC, X(INGWZ), X(WUNJO), X(EHWAZ), X(RAIDO), X(TIWAZ), X(IWAZ), X(UR), X(ISAZ), X(ETHEL), X(PERTH), SC(BSPC) }, - {ED(TAB), X(ANSUZ), X(SOWIL), X(DAGAZ), X(FE), X(GEBO), X(HAGLZ), X(JERAN), X(KAUNA), X(LAUKZ), XXXXXXX, NM(SCLN) }, - {MT_QUOT, XXXXXXX, X(ALGIZ), X(THURS), X(KAUNA), X(WUNJO), X(BEORC), X(NAUDZ), X(MANNZ), KC_COMM, FK(DOT), RS(SLSH) }, + {KC_ESC, UM(INGWZ), UM(WUNJO), UM(EHWAZ), UM(RAIDO), UM(TIWAZ), UM(IWAZ), UM(UR), UM(ISAZ), UM(ETHEL), UM(PERTH), SC(BSPC) }, + {ED(TAB), UM(ANSUZ), UM(SOWIL), UM(DAGAZ), UM(FE), UM(GEBO), UM(HAGLZ), UM(JERAN), UM(KAUNA), UM(LAUKZ), XXXXXXX, NM(SCLN) }, + {MT_QUOT, XXXXXXX, UM(ALGIZ), UM(THURS), UM(KAUNA), UM(WUNJO), UM(BEORC), UM(NAUDZ), UM(MANNZ), KC_COMM, FK(DOT), RS(SLSH) }, {LC(ESC), XXXXXXX, LG(LBRC), LA(RBRC), NM(BSPC), XXXXXXX, XXXXXXX, SM(SPC), XXXXXXX, RA(MINS), RG(EQL), RC(ENT) } }, #endif diff --git a/keyboards/handwired/mutepad/config.h b/keyboards/handwired/mutepad/config.h index 83c78b1634..632465bba7 100644 --- a/keyboards/handwired/mutepad/config.h +++ b/keyboards/handwired/mutepad/config.h @@ -3,8 +3,6 @@ #pragma once -#define TAP_CODE_DELAY 10 - /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ #define LOCKING_SUPPORT_ENABLE /* Locking resynchronize hack */ diff --git a/keyboards/handwired/mutepad/info.json b/keyboards/handwired/mutepad/info.json index e8df528eff..5adb2505fb 100644 --- a/keyboards/handwired/mutepad/info.json +++ b/keyboards/handwired/mutepad/info.json @@ -19,6 +19,9 @@ {"pin_a": "F4", "pin_b": "F5", "resolution": 2} ] }, + "qmk": { + "tap_keycode_delay": 10 + }, "processor": "atmega32u4", "bootloader": "caterina", "layouts": { diff --git a/keyboards/handwired/myskeeb/config.h b/keyboards/handwired/myskeeb/config.h index 2e2a2bbcbf..8c37524a0e 100644 --- a/keyboards/handwired/myskeeb/config.h +++ b/keyboards/handwired/myskeeb/config.h @@ -13,7 +13,3 @@ #define OLED_FONT_HEIGHT 8 #define OLED_FONT_WIDTH 6 #define OLED_FONT_H "skeeb_font.c" - -// Tap Dance - -#define TAPPING_TERM 200 diff --git a/keyboards/handwired/myskeeb/oled.c b/keyboards/handwired/myskeeb/oled.c index 3f43590b8e..675b290630 100644 --- a/keyboards/handwired/myskeeb/oled.c +++ b/keyboards/handwired/myskeeb/oled.c @@ -127,13 +127,13 @@ void render_layer_state(void){ } // Keylock State -void render_keylock_status(uint8_t led_usb_state) { +void render_keylock_status(led_t led_state) { oled_write_P(PSTR(" "), false); - oled_write_P(led_usb_state & (1<<USB_LED_NUM_LOCK) ? PSTR("-NUML") : PSTR("-----"), false); + oled_write_P(led_state.num_lock ? PSTR("-NUML") : PSTR("-----"), false); oled_write_P(PSTR(" "), false); - oled_write_P(led_usb_state & (1<<USB_LED_CAPS_LOCK) ? PSTR("-CAPS") : PSTR("-----"), false); + oled_write_P(led_state.caps_lock ? PSTR("-CAPS") : PSTR("-----"), false); oled_write_P(PSTR(" "), false); - oled_write_P(led_usb_state & (1<<USB_LED_SCROLL_LOCK) ? PSTR("-SCRL") : PSTR("-----"), false); + oled_write_P(led_state.scroll_lock ? PSTR("-SCRL") : PSTR("-----"), false); oled_write_P(PSTR(" "), false); } @@ -213,7 +213,7 @@ if (is_keyboard_master()) { oled_write_P(oled_layer_line_end, false); oled_write_P(oled_layer_keylog_bottom, false); oled_write_P(oled_line_start, false); - render_keylock_status(host_keyboard_leds()); + render_keylock_status(host_keyboard_led_state()); oled_write_P(oled_layer_line_end, false); oled_write_P(oled_mods_bottom, false); oled_write_P(oled_line_start, false); diff --git a/keyboards/handwired/onekey/bluepill/rules.mk b/keyboards/handwired/onekey/bluepill/rules.mk index a92b099328..8b13789179 100644 --- a/keyboards/handwired/onekey/bluepill/rules.mk +++ b/keyboards/handwired/onekey/bluepill/rules.mk @@ -1,2 +1 @@ -# Enter lower-power sleep mode when on the ChibiOS idle thread -OPT_DEFS += -DCORTEX_ENABLE_WFI_IDLE=TRUE + diff --git a/keyboards/handwired/onekey/bluepill_f103c6/rules.mk b/keyboards/handwired/onekey/bluepill_f103c6/rules.mk index 8fd4321938..71bc488563 100644 --- a/keyboards/handwired/onekey/bluepill_f103c6/rules.mk +++ b/keyboards/handwired/onekey/bluepill_f103c6/rules.mk @@ -7,9 +7,6 @@ BOOTLOADER_TYPE = stm32duino DFU_ARGS = -d 1EAF:0003 -a 2 -R DFU_SUFFIX_ARGS = -v 1EAF -p 0003 -# Enter lower-power sleep mode when on the ChibiOS idle thread -OPT_DEFS += -DCORTEX_ENABLE_WFI_IDLE=TRUE - # LTO is required to fit the firmware into the available 24K of flash LTO_ENABLE = yes diff --git a/keyboards/handwired/onekey/bluepill_uf2boot/rules.mk b/keyboards/handwired/onekey/bluepill_uf2boot/rules.mk index a92b099328..8b13789179 100644 --- a/keyboards/handwired/onekey/bluepill_uf2boot/rules.mk +++ b/keyboards/handwired/onekey/bluepill_uf2boot/rules.mk @@ -1,2 +1 @@ -# Enter lower-power sleep mode when on the ChibiOS idle thread -OPT_DEFS += -DCORTEX_ENABLE_WFI_IDLE=TRUE + diff --git a/keyboards/handwired/onekey/config.h b/keyboards/handwired/onekey/config.h index 7ef807c5d1..09cf965941 100644 --- a/keyboards/handwired/onekey/config.h +++ b/keyboards/handwired/onekey/config.h @@ -22,7 +22,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. /* Locking resynchronize hack */ #define LOCKING_RESYNC_ENABLE -#define TAPPING_TERM 500 #define PERMISSIVE_HOLD /* diff --git a/keyboards/handwired/onekey/info.json b/keyboards/handwired/onekey/info.json index 339dfe5974..17bb84a82c 100644 --- a/keyboards/handwired/onekey/info.json +++ b/keyboards/handwired/onekey/info.json @@ -7,6 +7,9 @@ "pid": "0x6465", "device_version": "0.0.1" }, + "tapping": { + "term": 500 + }, "diode_direction": "COL2ROW", "features": { "bootmagic": false, diff --git a/keyboards/handwired/onekey/nucleo_h723zg/info.json b/keyboards/handwired/onekey/nucleo_h723zg/info.json new file mode 100644 index 0000000000..7596d007b2 --- /dev/null +++ b/keyboards/handwired/onekey/nucleo_h723zg/info.json @@ -0,0 +1,19 @@ +{ + "keyboard_name": "Onekey Nucleo H723ZG", + "processor": "STM32H723", + "bootloader": "stm32-dfu", + "matrix_pins": { + "cols": ["A9"], + "rows": ["A10"] + }, + "backlight": { + "pin": "B8" + }, + "ws2812": { + "pin": "A0" + }, + "apa102": { + "data_pin": "A0", + "clock_pin": "B13" + } +} diff --git a/keyboards/handwired/onekey/nucleo_h723zg/readme.md b/keyboards/handwired/onekey/nucleo_h723zg/readme.md new file mode 100755 index 0000000000..97a2da5115 --- /dev/null +++ b/keyboards/handwired/onekey/nucleo_h723zg/readme.md @@ -0,0 +1,5 @@ +# ST Microelectronics Nucleo144-H723 onekey + +Supported Hardware: <https://www.st.com/en/evaluation-tools/nucleo-h723zg.html> + +To trigger keypress, short together pins *A9* and *A10*. diff --git a/keyboards/capsunlocked/cu80/v2_iso/base/rules.mk b/keyboards/handwired/onekey/nucleo_h723zg/rules.mk index e69de29bb2..e69de29bb2 100644..100755 --- a/keyboards/capsunlocked/cu80/v2_iso/base/rules.mk +++ b/keyboards/handwired/onekey/nucleo_h723zg/rules.mk diff --git a/keyboards/handwired/onekey/stm32f0_disco/rules.mk b/keyboards/handwired/onekey/stm32f0_disco/rules.mk index a92b099328..8b13789179 100644 --- a/keyboards/handwired/onekey/stm32f0_disco/rules.mk +++ b/keyboards/handwired/onekey/stm32f0_disco/rules.mk @@ -1,2 +1 @@ -# Enter lower-power sleep mode when on the ChibiOS idle thread -OPT_DEFS += -DCORTEX_ENABLE_WFI_IDLE=TRUE + diff --git a/keyboards/handwired/onekey/stm32f405_feather/rules.mk b/keyboards/handwired/onekey/stm32f405_feather/rules.mk index a92b099328..8b13789179 100644 --- a/keyboards/handwired/onekey/stm32f405_feather/rules.mk +++ b/keyboards/handwired/onekey/stm32f405_feather/rules.mk @@ -1,2 +1 @@ -# Enter lower-power sleep mode when on the ChibiOS idle thread -OPT_DEFS += -DCORTEX_ENABLE_WFI_IDLE=TRUE + diff --git a/keyboards/handwired/onekey/teensy_32/rules.mk b/keyboards/handwired/onekey/teensy_32/rules.mk index a92b099328..8b13789179 100644 --- a/keyboards/handwired/onekey/teensy_32/rules.mk +++ b/keyboards/handwired/onekey/teensy_32/rules.mk @@ -1,2 +1 @@ -# Enter lower-power sleep mode when on the ChibiOS idle thread -OPT_DEFS += -DCORTEX_ENABLE_WFI_IDLE=TRUE + diff --git a/keyboards/handwired/onekey/teensy_35/rules.mk b/keyboards/handwired/onekey/teensy_35/rules.mk index a92b099328..8b13789179 100644 --- a/keyboards/handwired/onekey/teensy_35/rules.mk +++ b/keyboards/handwired/onekey/teensy_35/rules.mk @@ -1,2 +1 @@ -# Enter lower-power sleep mode when on the ChibiOS idle thread -OPT_DEFS += -DCORTEX_ENABLE_WFI_IDLE=TRUE + diff --git a/keyboards/handwired/onekey/teensy_lc/rules.mk b/keyboards/handwired/onekey/teensy_lc/rules.mk index 9803d8cc70..abd2f7fce9 100644 --- a/keyboards/handwired/onekey/teensy_lc/rules.mk +++ b/keyboards/handwired/onekey/teensy_lc/rules.mk @@ -1,4 +1,2 @@ USE_CHIBIOS_CONTRIB = yes -# Enter lower-power sleep mode when on the ChibiOS idle thread -OPT_DEFS += -DCORTEX_ENABLE_WFI_IDLE=TRUE diff --git a/keyboards/handwired/ortho5x14/config.h b/keyboards/handwired/ortho5x14/config.h index c37ac42537..5f60fd44d7 100644 --- a/keyboards/handwired/ortho5x14/config.h +++ b/keyboards/handwired/ortho5x14/config.h @@ -22,8 +22,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. /* Locking resynchronize hack */ #define LOCKING_RESYNC_ENABLE -#define TAPPING_TERM 200 - //#define PERMISSIVE_HOLD /* diff --git a/keyboards/handwired/owlet60/config.h b/keyboards/handwired/owlet60/config.h index ba5322f32f..18ab1e446f 100644 --- a/keyboards/handwired/owlet60/config.h +++ b/keyboards/handwired/owlet60/config.h @@ -40,11 +40,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. /* COL2ROW, ROW2COL*/ #define DIODE_DIRECTION COL2ROW - #define RGBLED_NUM 8 - #define RGBLIGHT_HUE_STEP 8 - #define RGBLIGHT_SAT_STEP 8 - #define RGBLIGHT_VAL_STEP 8 - #define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */ #define RGBLIGHT_EFFECT_BREATHING #define RGBLIGHT_EFFECT_RAINBOW_MOOD #define RGBLIGHT_EFFECT_RAINBOW_SWIRL diff --git a/keyboards/handwired/owlet60/info.json b/keyboards/handwired/owlet60/info.json index d036911755..e697ca7a38 100644 --- a/keyboards/handwired/owlet60/info.json +++ b/keyboards/handwired/owlet60/info.json @@ -12,7 +12,11 @@ "pin": "D0" }, "rgblight": { - "max_brightness": 128 + "saturation_steps": 8, + "brightness_steps": 8, + "led_count": 8, + "max_brightness": 128, + "sleep": true }, "processor": "atmega32u4", "bootloader": "caterina", diff --git a/keyboards/handwired/owlet60/keymaps/oled_testing/keymap.c b/keyboards/handwired/owlet60/keymaps/oled_testing/keymap.c index f617fb5e68..f54ceb4491 100644 --- a/keyboards/handwired/owlet60/keymaps/oled_testing/keymap.c +++ b/keyboards/handwired/owlet60/keymaps/oled_testing/keymap.c @@ -67,24 +67,6 @@ oled_rotation_t oled_init_user(oled_rotation_t rotation) { return OLED_ROTATION_180; } bool oled_task_user(void) { - // Host Keyboard Layer Status - /*oled_write_P(PSTR("Lyr: "), false); - switch (get_highest_layer(layer_state)) { - case 0: - oled_write_P(PSTR("Alpha\n"), false); - break; - case 1: - oled_write_P(PSTR("FN\n"), false); - break; - default: - // Or use the write_ln shortcut over adding '\n' to the end of your string - oled_write_ln_P(PSTR("Undefined"), false); - } - - uint8_t led_usb_state = host_keyboard_leds(); - oled_write_P(led_usb_state & (1<<USB_LED_CAPS_LOCK) ? PSTR("CAPLCK ") : PSTR(" "), false); - */ - static const char PROGMEM qmk_logo[] = { 0x80,0x81,0x82,0x83,0x84,0x85,0x86,0x87,0x88,0x89,0x8a,0x8b,0x8c,0x8d,0x8e,0x8f,0x90,0x91,0x92,0x93,0x94, 0xa0,0xa1,0xa2,0xa3,0xa4,0xa5,0xa6,0xa7,0xa8,0xa9,0xaa,0xab,0xac,0xad,0xae,0xaf,0xb0,0xb1,0xb2,0xb3,0xb4, diff --git a/keyboards/handwired/pill60/bluepill/rules.mk b/keyboards/handwired/pill60/bluepill/rules.mk index a92b099328..8b13789179 100644 --- a/keyboards/handwired/pill60/bluepill/rules.mk +++ b/keyboards/handwired/pill60/bluepill/rules.mk @@ -1,2 +1 @@ -# Enter lower-power sleep mode when on the ChibiOS idle thread -OPT_DEFS += -DCORTEX_ENABLE_WFI_IDLE=TRUE + diff --git a/keyboards/handwired/prime_exl_plus/config.h b/keyboards/handwired/prime_exl_plus/config.h index a660e0ddfa..691995b349 100644 --- a/keyboards/handwired/prime_exl_plus/config.h +++ b/keyboards/handwired/prime_exl_plus/config.h @@ -17,7 +17,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #pragma once -#define RGBLED_NUM 10 #define RGBLIGHT_EFFECT_BREATHING #define RGBLIGHT_EFFECT_RAINBOW_MOOD #define RGBLIGHT_EFFECT_RAINBOW_SWIRL diff --git a/keyboards/handwired/prime_exl_plus/info.json b/keyboards/handwired/prime_exl_plus/info.json index cb4a939a02..edea65842c 100644 --- a/keyboards/handwired/prime_exl_plus/info.json +++ b/keyboards/handwired/prime_exl_plus/info.json @@ -8,6 +8,9 @@ "pid": "0x6579", "device_version": "0.0.1" }, + "rgblight": { + "led_count": 10 + }, "ws2812": { "pin": "D4" }, diff --git a/keyboards/handwired/prkl30/feather/config.h b/keyboards/handwired/prkl30/feather/config.h index bb71df9c64..692efc513c 100644 --- a/keyboards/handwired/prkl30/feather/config.h +++ b/keyboards/handwired/prkl30/feather/config.h @@ -26,7 +26,3 @@ #define RGBLIGHT_EFFECT_RGB_TEST #define RGBLIGHT_EFFECT_ALTERNATING #define RGBLIGHT_EFFECT_TWINKLE -#define RGBLED_NUM 13 -#define RGBLIGHT_HUE_STEP 8 -#define RGBLIGHT_SAT_STEP 8 -#define RGBLIGHT_VAL_STEP 8 diff --git a/keyboards/handwired/prkl30/feather/info.json b/keyboards/handwired/prkl30/feather/info.json index 08c6e107dd..e0570d71bf 100644 --- a/keyboards/handwired/prkl30/feather/info.json +++ b/keyboards/handwired/prkl30/feather/info.json @@ -1,4 +1,9 @@ { + "rgblight": { + "saturation_steps": 8, + "brightness_steps": 8, + "led_count": 13 + }, "ws2812": { "pin": "D1" }, diff --git a/keyboards/handwired/prkl30/promicro/config.h b/keyboards/handwired/prkl30/promicro/config.h index bb71df9c64..692efc513c 100644 --- a/keyboards/handwired/prkl30/promicro/config.h +++ b/keyboards/handwired/prkl30/promicro/config.h @@ -26,7 +26,3 @@ #define RGBLIGHT_EFFECT_RGB_TEST #define RGBLIGHT_EFFECT_ALTERNATING #define RGBLIGHT_EFFECT_TWINKLE -#define RGBLED_NUM 13 -#define RGBLIGHT_HUE_STEP 8 -#define RGBLIGHT_SAT_STEP 8 -#define RGBLIGHT_VAL_STEP 8 diff --git a/keyboards/handwired/prkl30/promicro/info.json b/keyboards/handwired/prkl30/promicro/info.json index 69c3ae8bfe..a77a02a6c3 100644 --- a/keyboards/handwired/prkl30/promicro/info.json +++ b/keyboards/handwired/prkl30/promicro/info.json @@ -3,6 +3,11 @@ "cols": ["B4", "B5", "F6", "F5", "F4", "F7", "B1", "B3", "B2", "B6"], "rows": ["D4", "C6", "D7", "E6"] }, + "rgblight": { + "saturation_steps": 8, + "brightness_steps": 8, + "led_count": 13 + }, "ws2812": { "pin": "D1" }, diff --git a/keyboards/handwired/promethium/keymaps/default/keymap.c b/keyboards/handwired/promethium/keymaps/default/keymap.c index 100db97678..ff73e51d5e 100644 --- a/keyboards/handwired/promethium/keymaps/default/keymap.c +++ b/keyboards/handwired/promethium/keymaps/default/keymap.c @@ -779,9 +779,9 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { * `-----------------------------------------------------------------------------------' */ [_PUNC] = LAYOUT( - KC_TILD, KC_EXLM, KC_AT, KC_HASH, KC_DLR, KC_PERC, KC_CIRC, KC_AMPR, KC_ASTR, X(LTEQ), X(GTEQ), _______, - KC_GRV, KC_ASTR, KC_BSLS, KC_MINS, KC_EQL, KC_SLSH, X(NOTEQ),KC_LPRN, KC_RPRN, KC_LABK, KC_RABK, _______, - KC_AMPR, KC_CIRC, KC_PIPE, KC_UNDS, KC_PLUS, KC_QUES, X(PLMIN),KC_LBRC, KC_RBRC, KC_LCBR, KC_RCBR, _______, + KC_TILD, KC_EXLM, KC_AT, KC_HASH, KC_DLR, KC_PERC, KC_CIRC, KC_AMPR, KC_ASTR, UM(LTEQ), UM(GTEQ), _______, + KC_GRV, KC_ASTR, KC_BSLS, KC_MINS, KC_EQL, KC_SLSH, UM(NOTEQ),KC_LPRN, KC_RPRN, KC_LABK, KC_RABK, _______, + KC_AMPR, KC_CIRC, KC_PIPE, KC_UNDS, KC_PLUS, KC_QUES, UM(PLMIN),KC_LBRC, KC_RBRC, KC_LCBR, KC_RCBR, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_COLN, _______, _______, _______, _______ ), @@ -836,9 +836,9 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { * `-----------------------------------------------------------------------------------' */ [_GREEKU] = LAYOUT( - _______, XXXXXXX, XXXXXXX,X(UEPSI), X(URHO), X(UTAU),X(UUPSI),X(UTHET),X(UIOTA),X(UOMIC), X(UPI), _______, - _______,X(UALPH),X(USIGM),X(UDELT), X(UPHI),X(UGAMM), X(UETA), X(UXI),X(UKAPP),X(ULAMB), KC_QUOT, _______, - _______,X(UZETA), X(UCHI), X(UPSI),X(UOMEG),X(UBETA), X(UNU), X(UMU), KC_COMM, KC_DOT, KC_SLSH, _______, + _______, XXXXXXX, XXXXXXX,UM(UEPSI), UM(URHO), UM(UTAU),UM(UUPSI),UM(UTHET),UM(UIOTA),UM(UOMIC), UM(UPI), _______, + _______,UM(UALPH),UM(USIGM),UM(UDELT), UM(UPHI),UM(UGAMM), UM(UETA), UM(UXI),UM(UKAPP),UM(ULAMB), KC_QUOT, _______, + _______,UM(UZETA), UM(UCHI), UM(UPSI),UM(UOMEG),UM(UBETA), UM(UNU), UM(UMU), KC_COMM, KC_DOT, KC_SLSH, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______ ), @@ -855,9 +855,9 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { * `-----------------------------------------------------------------------------------' */ [_GREEKL] = LAYOUT( - _______, XXXXXXX,X(FSIGM),X(LEPSI), X(LRHO), X(LTAU),X(LUPSI),X(LTHET),X(LIOTA),X(LOMIC), X(LPI), _______, - _______,X(LALPH),X(LSIGM),X(LDELT), X(LPHI),X(LGAMM), X(LETA), X(LXI),X(LKAPP),X(LLAMB), KC_QUOT, _______, - _______,X(LZETA), X(LCHI), X(LPSI),X(LOMEG),X(LBETA), X(LNU), X(LMU), KC_COMM, KC_DOT, KC_SLSH, _______, + _______, XXXXXXX,UM(FSIGM),UM(LEPSI), UM(LRHO), UM(LTAU),UM(LUPSI),UM(LTHET),UM(LIOTA),UM(LOMIC), UM(LPI), _______, + _______,UM(LALPH),UM(LSIGM),UM(LDELT), UM(LPHI),UM(LGAMM), UM(LETA), UM(LXI),UM(LKAPP),UM(LLAMB), KC_QUOT, _______, + _______,UM(LZETA), UM(LCHI), UM(LPSI),UM(LOMEG),UM(LBETA), UM(LNU), UM(LMU), KC_COMM, KC_DOT, KC_SLSH, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______ ), @@ -893,10 +893,10 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { * `-----------------------------------------------------------------------------------' */ [_EMOJI] = LAYOUT( - X(HART2), X(CRY2),X(WEARY),X(EYERT),X(SMIRK), X(TJOY),X(RECYC),X(UNAMU),X(MUSIC),X(OKHND),X(PENSV), X(PHEW), - X(THMUP), X(PRAY),X(SMILE),X(SMIL2),X(FLUSH), X(GRIN),X(HEART), X(BYE), X(KISS),X(CELEB), X(COOL),X(NOEVS), - X(THMDN),X(SLEEP), X(CLAP), X(CRY), X(VIC),X(BHART), X(SUN),X(SMEYE), X(WINK), X(MOON),X(CONFU),X(NOEVH), - X(POO), X(EYES), X(HUNRD),_______, X(SKULL),X(HORNS), X(HALO), X(FEAR),_______,X(YUMMY),X(DISAP),X(NOEVK), + UM(HART2), UM(CRY2),UM(WEARY),UM(EYERT),UM(SMIRK), UM(TJOY),UM(RECYC),UM(UNAMU),UM(MUSIC),UM(OKHND),UM(PENSV), UM(PHEW), + UM(THMUP), UM(PRAY),UM(SMILE),UM(SMIL2),UM(FLUSH), UM(GRIN),UM(HEART), UM(BYE), UM(KISS),UM(CELEB), UM(COOL),UM(NOEVS), + UM(THMDN),UM(SLEEP), UM(CLAP), UM(CRY), UM(VIC),UM(BHART), UM(SUN),UM(SMEYE), UM(WINK), UM(MOON),UM(CONFU),UM(NOEVH), + UM(POO), UM(EYES), UM(HUNRD),_______, UM(SKULL),UM(HORNS), UM(HALO), UM(FEAR),_______,UM(YUMMY),UM(DISAP),UM(NOEVK), _______, _______, _______ ), @@ -1303,8 +1303,8 @@ void turn_off_capslock(void) { rgbsps_send(); } - void led_set_user(uint8_t usb_led) { - bool new_capslock = usb_led & (1<<USB_LED_CAPS_LOCK); + bool led_update_user(led_t led_state) { + bool new_capslock = led_state.caps_lock; if (new_capslock ^ capslock) { // capslock state is different if ((capslock = new_capslock)) { rgbsps_set(LED_IND_CAPSLOCK, THEME_COLOR_CAPSLOCK); @@ -1313,6 +1313,7 @@ void turn_off_capslock(void) { } rgbsps_send(); } + return false; } #endif diff --git a/keyboards/handwired/promethium/keymaps/priyadi/keymap.c b/keyboards/handwired/promethium/keymaps/priyadi/keymap.c index 1d299c2299..37cff59cb1 100644 --- a/keyboards/handwired/promethium/keymaps/priyadi/keymap.c +++ b/keyboards/handwired/promethium/keymaps/priyadi/keymap.c @@ -782,9 +782,9 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { * `-----------------------------------------------------------------------------------' */ [_PUNC] = LAYOUT( - KC_TILD, KC_EXLM, KC_AT, KC_HASH, KC_DLR, KC_PERC, KC_CIRC, KC_AMPR, KC_ASTR, X(LTEQ), X(GTEQ), _______, - KC_GRV, KC_ASTR, KC_BSLS, KC_MINS, KC_EQL, KC_SLSH, X(NOTEQ),KC_LPRN, KC_RPRN, KC_LABK, KC_RABK, _______, - KC_AMPR, KC_CIRC, KC_PIPE, KC_UNDS, KC_PLUS, KC_QUES, X(PLMIN),KC_LBRC, KC_RBRC, KC_LCBR, KC_RCBR, _______, + KC_TILD, KC_EXLM, KC_AT, KC_HASH, KC_DLR, KC_PERC, KC_CIRC, KC_AMPR, KC_ASTR, UM(LTEQ), UM(GTEQ), _______, + KC_GRV, KC_ASTR, KC_BSLS, KC_MINS, KC_EQL, KC_SLSH, UM(NOTEQ),KC_LPRN, KC_RPRN, KC_LABK, KC_RABK, _______, + KC_AMPR, KC_CIRC, KC_PIPE, KC_UNDS, KC_PLUS, KC_QUES, UM(PLMIN),KC_LBRC, KC_RBRC, KC_LCBR, KC_RCBR, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_COLN, _______, _______, _______, _______ ), @@ -839,9 +839,9 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { * `-----------------------------------------------------------------------------------' */ [_GREEKU] = LAYOUT( - _______, XXXXXXX, XXXXXXX,X(UEPSI), X(URHO), X(UTAU),X(UUPSI),X(UTHET),X(UIOTA),X(UOMIC), X(UPI), _______, - _______,X(UALPH),X(USIGM),X(UDELT), X(UPHI),X(UGAMM), X(UETA), X(UXI),X(UKAPP),X(ULAMB), KC_QUOT, _______, - _______,X(UZETA), X(UCHI), X(UPSI),X(UOMEG),X(UBETA), X(UNU), X(UMU), KC_COMM, KC_DOT, KC_SLSH, _______, + _______, XXXXXXX, XXXXXXX,UM(UEPSI), UM(URHO), UM(UTAU),UM(UUPSI),UM(UTHET),UM(UIOTA),UM(UOMIC), UM(UPI), _______, + _______,UM(UALPH),UM(USIGM),UM(UDELT), UM(UPHI),UM(UGAMM), UM(UETA), UM(UXI),UM(UKAPP),UM(ULAMB), KC_QUOT, _______, + _______,UM(UZETA), UM(UCHI), UM(UPSI),UM(UOMEG),UM(UBETA), UM(UNU), UM(UMU), KC_COMM, KC_DOT, KC_SLSH, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______ ), @@ -858,9 +858,9 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { * `-----------------------------------------------------------------------------------' */ [_GREEKL] = LAYOUT( - _______, XXXXXXX,X(FSIGM),X(LEPSI), X(LRHO), X(LTAU),X(LUPSI),X(LTHET),X(LIOTA),X(LOMIC), X(LPI), _______, - _______,X(LALPH),X(LSIGM),X(LDELT), X(LPHI),X(LGAMM), X(LETA), X(LXI),X(LKAPP),X(LLAMB), KC_QUOT, _______, - _______,X(LZETA), X(LCHI), X(LPSI),X(LOMEG),X(LBETA), X(LNU), X(LMU), KC_COMM, KC_DOT, KC_SLSH, _______, + _______, XXXXXXX,UM(FSIGM),UM(LEPSI), UM(LRHO), UM(LTAU),UM(LUPSI),UM(LTHET),UM(LIOTA),UM(LOMIC), UM(LPI), _______, + _______,UM(LALPH),UM(LSIGM),UM(LDELT), UM(LPHI),UM(LGAMM), UM(LETA), UM(LXI),UM(LKAPP),UM(LLAMB), KC_QUOT, _______, + _______,UM(LZETA), UM(LCHI), UM(LPSI),UM(LOMEG),UM(LBETA), UM(LNU), UM(LMU), KC_COMM, KC_DOT, KC_SLSH, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______ ), @@ -896,10 +896,10 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { * `-----------------------------------------------------------------------------------' */ [_EMOJI] = LAYOUT( - X(HART2), X(CRY2),X(WEARY),X(EYERT),X(SMIRK), X(TJOY),X(RECYC),X(UNAMU),X(MUSIC),X(OKHND),X(PENSV), X(PHEW), - X(THMUP), X(PRAY),X(SMILE),X(SMIL2),X(FLUSH), X(GRIN),X(HEART), X(BYE), X(KISS),X(CELEB), X(COOL),X(NOEVS), - X(THMDN),X(SLEEP), X(CLAP), X(CRY), X(VIC),X(BHART), X(SUN),X(SMEYE), X(WINK), X(MOON),X(CONFU),X(NOEVH), - X(POO), X(EYES), X(HUNRD),_______, X(SKULL),X(HORNS), X(HALO), X(FEAR),_______,X(YUMMY),X(DISAP),X(NOEVK), + UM(HART2), UM(CRY2),UM(WEARY),UM(EYERT),UM(SMIRK), UM(TJOY),UM(RECYC),UM(UNAMU),UM(MUSIC),UM(OKHND),UM(PENSV), UM(PHEW), + UM(THMUP), UM(PRAY),UM(SMILE),UM(SMIL2),UM(FLUSH), UM(GRIN),UM(HEART), UM(BYE), UM(KISS),UM(CELEB), UM(COOL),UM(NOEVS), + UM(THMDN),UM(SLEEP), UM(CLAP), UM(CRY), UM(VIC),UM(BHART), UM(SUN),UM(SMEYE), UM(WINK), UM(MOON),UM(CONFU),UM(NOEVH), + UM(POO), UM(EYES), UM(HUNRD),_______, UM(SKULL),UM(HORNS), UM(HALO), UM(FEAR),_______,UM(YUMMY),UM(DISAP),UM(NOEVK), _______, _______, _______ ), @@ -1306,8 +1306,8 @@ void turn_off_capslock(void) { rgbsps_send(); } - void led_set_user(uint8_t usb_led) { - bool new_capslock = usb_led & (1<<USB_LED_CAPS_LOCK); + bool led_update_user(led_t led_state) { + bool new_capslock = led_state.caps_lock; if (new_capslock ^ capslock) { // capslock state is different if ((capslock = new_capslock)) { rgbsps_set(LED_IND_CAPSLOCK, THEME_COLOR_CAPSLOCK); @@ -1316,6 +1316,7 @@ void turn_off_capslock(void) { } rgbsps_send(); } + return false; } #endif diff --git a/keyboards/handwired/pterodactyl/config.h b/keyboards/handwired/pterodactyl/config.h index 40aee1e05e..ff53a1970d 100644 --- a/keyboards/handwired/pterodactyl/config.h +++ b/keyboards/handwired/pterodactyl/config.h @@ -37,8 +37,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #define MOUSEKEY_MAX_SPEED 7 #define MOUSEKEY_WHEEL_DELAY 0 -#define TAPPING_TOGGLE 1 - /* key combination for command */ #define IS_COMMAND() ( \ get_mods() == (MOD_BIT(KC_LCTL) | MOD_BIT(KC_RCTL)) || \ diff --git a/keyboards/handwired/pterodactyl/info.json b/keyboards/handwired/pterodactyl/info.json index 213b7aa53b..3598b39b8d 100644 --- a/keyboards/handwired/pterodactyl/info.json +++ b/keyboards/handwired/pterodactyl/info.json @@ -11,6 +11,9 @@ "processor": "atmega32u4", "bootloader": "caterina", "debounce": 0, + "tapping": { + "toggle": 1 + }, "layouts": { "LAYOUT_pterodactyl": { "layout": [ diff --git a/keyboards/handwired/qc60/info.json b/keyboards/handwired/qc60/info.json index b78ca3c807..7fba95f9d1 100644 --- a/keyboards/handwired/qc60/info.json +++ b/keyboards/handwired/qc60/info.json @@ -8,6 +8,9 @@ "pid": "0x0C60", "device_version": "1.0.0" }, + "rgblight": { + "led_count": 1 + }, "ws2812": { "pin": "D3" }, diff --git a/keyboards/handwired/qc60/proto/config.h b/keyboards/handwired/qc60/proto/config.h deleted file mode 100644 index a64c4ebeec..0000000000 --- a/keyboards/handwired/qc60/proto/config.h +++ /dev/null @@ -1,4 +0,0 @@ -#pragma once - -/* ws2812 RGB LED */ -#define RGBLED_NUM 1 // Number of LEDs diff --git a/keyboards/handwired/riblee_f401/config.h b/keyboards/handwired/riblee_f401/config.h index 09a304e1c7..c39cbc87f5 100644 --- a/keyboards/handwired/riblee_f401/config.h +++ b/keyboards/handwired/riblee_f401/config.h @@ -17,5 +17,3 @@ #pragma once #define MOUSEKEY_INTERVAL 32 - -#define TAPPING_TERM 175
\ No newline at end of file diff --git a/keyboards/handwired/riblee_f401/info.json b/keyboards/handwired/riblee_f401/info.json index 7b9b320b98..4ff8ec21f6 100644 --- a/keyboards/handwired/riblee_f401/info.json +++ b/keyboards/handwired/riblee_f401/info.json @@ -8,6 +8,9 @@ "pid": "0x002A", "device_version": "0.0.1" }, + "tapping": { + "term": 175 + }, "matrix_pins": { "cols": ["B10", "B1", "B0", "B15", "A8", "B3", "B4", "B5", "B6", "B7", "B8", "B9"], "rows": ["A6", "A5", "A4", "A3", "A2"] diff --git a/keyboards/handwired/riblee_f411/config.h b/keyboards/handwired/riblee_f411/config.h index 425b35f266..c39cbc87f5 100644 --- a/keyboards/handwired/riblee_f411/config.h +++ b/keyboards/handwired/riblee_f411/config.h @@ -17,5 +17,3 @@ #pragma once #define MOUSEKEY_INTERVAL 32 - -#define TAPPING_TERM 175 diff --git a/keyboards/handwired/riblee_f411/info.json b/keyboards/handwired/riblee_f411/info.json index d13dfb2291..1c957e9940 100644 --- a/keyboards/handwired/riblee_f411/info.json +++ b/keyboards/handwired/riblee_f411/info.json @@ -8,6 +8,9 @@ "pid": "0x002B", "device_version": "0.0.1" }, + "tapping": { + "term": 175 + }, "matrix_pins": { "cols": ["B10", "B1", "B0", "B15", "A8", "B3", "B4", "B5", "B14", "A0", "B8", "B9"], "rows": ["A6", "A5", "A4", "A3", "A2"] diff --git a/keyboards/handwired/sejin_eat1010r2/rules.mk b/keyboards/handwired/sejin_eat1010r2/rules.mk index a92b099328..8b13789179 100644 --- a/keyboards/handwired/sejin_eat1010r2/rules.mk +++ b/keyboards/handwired/sejin_eat1010r2/rules.mk @@ -1,2 +1 @@ -# Enter lower-power sleep mode when on the ChibiOS idle thread -OPT_DEFS += -DCORTEX_ENABLE_WFI_IDLE=TRUE + diff --git a/keyboards/handwired/selene/config.h b/keyboards/handwired/selene/config.h index 7ee210aa84..31c0cc59f7 100644 --- a/keyboards/handwired/selene/config.h +++ b/keyboards/handwired/selene/config.h @@ -16,7 +16,5 @@ #pragma once -#define RGBLED_NUM 50 - #define LOCKING_SUPPORT_ENABLE #define LOCKING_RESYNC_ENABLE diff --git a/keyboards/handwired/selene/info.json b/keyboards/handwired/selene/info.json index 24cb90487c..b99e41bda5 100644 --- a/keyboards/handwired/selene/info.json +++ b/keyboards/handwired/selene/info.json @@ -8,6 +8,9 @@ "pid": "0x0001", "device_version": "0.0.1" }, + "rgblight": { + "led_count": 50 + }, "ws2812": { "pin": "A3" }, diff --git a/keyboards/handwired/sono1/stm32f103/rules.mk b/keyboards/handwired/sono1/stm32f103/rules.mk index a92b099328..8b13789179 100644 --- a/keyboards/handwired/sono1/stm32f103/rules.mk +++ b/keyboards/handwired/sono1/stm32f103/rules.mk @@ -1,2 +1 @@ -# Enter lower-power sleep mode when on the ChibiOS idle thread -OPT_DEFS += -DCORTEX_ENABLE_WFI_IDLE=TRUE + diff --git a/keyboards/handwired/split65/promicro/config.h b/keyboards/handwired/split65/promicro/config.h index b92456da98..f5c5ee3be2 100644 --- a/keyboards/handwired/split65/promicro/config.h +++ b/keyboards/handwired/split65/promicro/config.h @@ -15,8 +15,6 @@ */ #pragma once -#define MATRIX_IO_DELAY 5 - #define SELECT_SOFT_SERIAL_SPEED 1 // Feature diable options diff --git a/keyboards/handwired/split65/promicro/info.json b/keyboards/handwired/split65/promicro/info.json index e1540d99a2..ea41cb3ac1 100644 --- a/keyboards/handwired/split65/promicro/info.json +++ b/keyboards/handwired/split65/promicro/info.json @@ -1,7 +1,8 @@ { "matrix_pins": { "cols": ["F4", "F5", "F6", "F7", "B1", "B3", "B2", "B6"], - "rows": ["D4", "C6", "D7", "E6", "B4"] + "rows": ["D4", "C6", "D7", "E6", "B4"], + "io_delay": 5 }, "diode_direction": "COL2ROW", "split": { diff --git a/keyboards/handwired/split65/stm32/config.h b/keyboards/handwired/split65/stm32/config.h index 020e44f02e..3d48891e7e 100644 --- a/keyboards/handwired/split65/stm32/config.h +++ b/keyboards/handwired/split65/stm32/config.h @@ -21,8 +21,6 @@ #define AUDIO_PIN_ALT A4 #define AUDIO_PIN_ALT_AS_NEGATIVE -#define MATRIX_IO_DELAY 5 - #define SELECT_SOFT_SERIAL_SPEED 1 #define SERIAL_USART_DRIVER SD1 #define SERIAL_USART_TX_PAL_MODE 7 diff --git a/keyboards/handwired/split65/stm32/info.json b/keyboards/handwired/split65/stm32/info.json index b9956ed7ab..61aff0e7ea 100644 --- a/keyboards/handwired/split65/stm32/info.json +++ b/keyboards/handwired/split65/stm32/info.json @@ -1,7 +1,8 @@ { "matrix_pins": { "cols": ["A2", "A1", "A0", "B8", "B13", "B14", "B15", "B9"], - "rows": ["B5", "B4", "B3", "B2", "B1"] + "rows": ["B5", "B4", "B3", "B2", "B1"], + "io_delay": 5 }, "diode_direction": "COL2ROW", "split": { diff --git a/keyboards/handwired/splittest/bluepill/rules.mk b/keyboards/handwired/splittest/bluepill/rules.mk index a92b099328..8b13789179 100644 --- a/keyboards/handwired/splittest/bluepill/rules.mk +++ b/keyboards/handwired/splittest/bluepill/rules.mk @@ -1,2 +1 @@ -# Enter lower-power sleep mode when on the ChibiOS idle thread -OPT_DEFS += -DCORTEX_ENABLE_WFI_IDLE=TRUE + diff --git a/keyboards/handwired/splittest/config.h b/keyboards/handwired/splittest/config.h index 49bc3cbddb..ef6699d079 100644 --- a/keyboards/handwired/splittest/config.h +++ b/keyboards/handwired/splittest/config.h @@ -34,8 +34,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #define RGBLIGHT_EFFECT_RGB_TEST #define RGBLIGHT_EFFECT_ALTERNATING #define RGBLIGHT_EFFECT_TWINKLE -#define RGBLED_NUM 12 -#define RGBLED_SPLIT { 6, 6 } /* * Feature disable options diff --git a/keyboards/handwired/splittest/info.json b/keyboards/handwired/splittest/info.json index efd82d20c4..cb9c16e889 100644 --- a/keyboards/handwired/splittest/info.json +++ b/keyboards/handwired/splittest/info.json @@ -8,6 +8,10 @@ "pid": "0x1111", "device_version": "1.0.0" }, + "rgblight": { + "led_count": 12, + "split_count": [6, 6] + }, "layouts": { "LAYOUT": { "layout": [ diff --git a/keyboards/handwired/steamvan/keymaps/jmdaly/keymap.c b/keyboards/handwired/steamvan/keymaps/jmdaly/keymap.c index 7b6a4c1e74..21ba0e5b3d 100644 --- a/keyboards/handwired/steamvan/keymaps/jmdaly/keymap.c +++ b/keyboards/handwired/steamvan/keymaps/jmdaly/keymap.c @@ -62,19 +62,3 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { _______, KC_LSFT, KC_B, KC_SPC, KC_C, _______, _______, _______ ) }; - -void matrix_init_user(void) { - -} - -void matrix_scan_user(void) { - -} - -bool process_record_user(uint16_t keycode, keyrecord_t *record) { - return true; -} - -void led_set_user(uint8_t usb_led) { - -} diff --git a/keyboards/handwired/steamvan/rev1/config.h b/keyboards/handwired/steamvan/rev1/config.h index ffd061fa17..28d368dab8 100644 --- a/keyboards/handwired/steamvan/rev1/config.h +++ b/keyboards/handwired/steamvan/rev1/config.h @@ -36,7 +36,4 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #define RGBLIGHT_EFFECT_ALTERNATING #define RGBLIGHT_EFFECT_TWINKLE -#define RGBLED_NUM 16 -#define RGB_MATRIX_LED_COUNT RGBLED_NUM - #define RGB_MATRIX_KEYPRESSES diff --git a/keyboards/handwired/steamvan/rev1/info.json b/keyboards/handwired/steamvan/rev1/info.json index b76753f19f..08a6cd06ce 100644 --- a/keyboards/handwired/steamvan/rev1/info.json +++ b/keyboards/handwired/steamvan/rev1/info.json @@ -17,6 +17,9 @@ "pin": "B8", "breathing": true }, + "rgblight": { + "led_count": 16 + }, "ws2812": { "pin": "A7", "driver": "spi" diff --git a/keyboards/handwired/swiftrax/bumblebee/config.h b/keyboards/handwired/swiftrax/bumblebee/config.h index 4fe6fb4428..fa4c9291e7 100644 --- a/keyboards/handwired/swiftrax/bumblebee/config.h +++ b/keyboards/handwired/swiftrax/bumblebee/config.h @@ -17,9 +17,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #pragma once -/* RGB Indicators */ -#define RGBLED_NUM 3 - /* Solenid Pin */ #define SOLENOID_PIN D2 diff --git a/keyboards/handwired/swiftrax/bumblebee/info.json b/keyboards/handwired/swiftrax/bumblebee/info.json index 9a46cb9849..e2cad64ad8 100644 --- a/keyboards/handwired/swiftrax/bumblebee/info.json +++ b/keyboards/handwired/swiftrax/bumblebee/info.json @@ -8,6 +8,9 @@ "pid": "0xE881", "device_version": "0.0.1" }, + "rgblight": { + "led_count": 3 + }, "ws2812": { "pin": "E6" }, diff --git a/keyboards/handwired/swiftrax/glacier/config.h b/keyboards/handwired/swiftrax/glacier/config.h index 4bff062d6c..b0fe39ae46 100644 --- a/keyboards/handwired/swiftrax/glacier/config.h +++ b/keyboards/handwired/swiftrax/glacier/config.h @@ -21,7 +21,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #define DYNAMIC_KEYMAP_LAYER_COUNT 3 /* RGB */ -#define RGBLED_NUM 12 #define RGBLIGHT_EFFECT_BREATHING #define RGBLIGHT_EFFECT_RAINBOW_MOOD #define RGBLIGHT_EFFECT_RAINBOW_SWIRL diff --git a/keyboards/handwired/swiftrax/glacier/info.json b/keyboards/handwired/swiftrax/glacier/info.json index 3aed06628f..8898503eb7 100644 --- a/keyboards/handwired/swiftrax/glacier/info.json +++ b/keyboards/handwired/swiftrax/glacier/info.json @@ -8,6 +8,9 @@ "pid": "0xE890", "device_version": "0.0.1" }, + "rgblight": { + "led_count": 12 + }, "ws2812": { "pin": "B0" }, diff --git a/keyboards/handwired/swiftrax/walter/config.h b/keyboards/handwired/swiftrax/walter/config.h index 5fdda201e0..daf96d9c9d 100644 --- a/keyboards/handwired/swiftrax/walter/config.h +++ b/keyboards/handwired/swiftrax/walter/config.h @@ -17,7 +17,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #pragma once -#define RGBLED_NUM 24 #define RGBLIGHT_EFFECT_BREATHING #define RGBLIGHT_EFFECT_RAINBOW_MOOD #define RGBLIGHT_EFFECT_RAINBOW_SWIRL diff --git a/keyboards/handwired/swiftrax/walter/info.json b/keyboards/handwired/swiftrax/walter/info.json index a52a0470e7..e7e72a5707 100644 --- a/keyboards/handwired/swiftrax/walter/info.json +++ b/keyboards/handwired/swiftrax/walter/info.json @@ -8,6 +8,9 @@ "pid": "0xE964", "device_version": "0.0.1" }, + "rgblight": { + "led_count": 24 + }, "ws2812": { "pin": "E6" }, diff --git a/keyboards/handwired/symmetry60/config.h b/keyboards/handwired/symmetry60/config.h index c92944a48f..3ae1aa8032 100644 --- a/keyboards/handwired/symmetry60/config.h +++ b/keyboards/handwired/symmetry60/config.h @@ -27,10 +27,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #define RGBLIGHT_EFFECT_RGB_TEST #define RGBLIGHT_EFFECT_ALTERNATING #define RGBLIGHT_EFFECT_TWINKLE -#define RGBLED_NUM 14 -#define RGBLIGHT_HUE_STEP 8 -#define RGBLIGHT_SAT_STEP 8 -#define RGBLIGHT_VAL_STEP 8 /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ #define LOCKING_SUPPORT_ENABLE diff --git a/keyboards/handwired/symmetry60/info.json b/keyboards/handwired/symmetry60/info.json index 54d58d8b7f..88f6f1c913 100644 --- a/keyboards/handwired/symmetry60/info.json +++ b/keyboards/handwired/symmetry60/info.json @@ -8,6 +8,11 @@ "pid": "0x0000", "device_version": "0.0.1" }, + "rgblight": { + "saturation_steps": 8, + "brightness_steps": 8, + "led_count": 14 + }, "ws2812": { "pin": "B1" }, diff --git a/keyboards/handwired/t111/keymaps/oleg/keymap.c b/keyboards/handwired/t111/keymaps/oleg/keymap.c index dd0c097197..b372de027b 100644 --- a/keyboards/handwired/t111/keymaps/oleg/keymap.c +++ b/keyboards/handwired/t111/keymaps/oleg/keymap.c @@ -117,10 +117,10 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { */ [1] = LAYOUT( VRSN, KC_SLEP, _______, UC_NEXT, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, - _______, _______, X(UAT), X(UHSH), X(UDLR), X(USCT), X(UCFX), X(UAMP), X(UAST), _______, _______, _______, _______, _______, _______, _______, _______, KC_CALC, _______, _______, _______, - _______, KC_BTN1, KC_MS_U, KC_BTN2, KC_BTN3, _______, _______, _______, KC_SYRQ, KC_SCRL, KC_PAUS, XP(ULSB, ULCB), XP(URSB, URCB), _______, _______, _______, _______, _______, _______, _______, - _______, KC_MS_L, KC_MS_D, KC_MS_R, KC_BTN5, _______, _______, _______, _______, _______, XP(USCO, UCLN), XP(UAPO, UQOT), _______, _______, _______, _______, _______, _______, _______, - _______, _______, _______, KC_BTN4, _______, _______, _______, _______, XP(UCOM, ULTH), XP(UDOT, UGTH), XP(USLS, UQUE), KC_APP, _______, _______, _______, _______, _______, _______, _______, + _______, _______, UM(UAT), UM(UHSH), UM(UDLR), UM(USCT), UM(UCFX), UM(UAMP), UM(UAST), _______, _______, _______, _______, _______, _______, _______, _______, KC_CALC, _______, _______, _______, + _______, KC_BTN1, KC_MS_U, KC_BTN2, KC_BTN3, _______, _______, _______, KC_SYRQ, KC_SCRL, KC_PAUS, UP(ULSB, ULCB), UP(URSB, URCB), _______, _______, _______, _______, _______, _______, _______, + _______, KC_MS_L, KC_MS_D, KC_MS_R, KC_BTN5, _______, _______, _______, _______, _______, UP(USCO, UCLN), UP(UAPO, UQOT), _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, KC_BTN4, _______, _______, _______, _______, UP(UCOM, ULTH), UP(UDOT, UGTH), UP(USLS, UQUE), KC_APP, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______ ) }; diff --git a/keyboards/handwired/t111/rules.mk b/keyboards/handwired/t111/rules.mk index 3939229475..2542c545bf 100644 --- a/keyboards/handwired/t111/rules.mk +++ b/keyboards/handwired/t111/rules.mk @@ -1,5 +1,3 @@ -# Enter lower-power sleep mode when on the ChibiOS idle thread -OPT_DEFS += -DCORTEX_ENABLE_WFI_IDLE=TRUE # Build Options # change yes to no to disable diff --git a/keyboards/handwired/tennie/config.h b/keyboards/handwired/tennie/config.h index c1acec7001..b54ad5f3ef 100644 --- a/keyboards/handwired/tennie/config.h +++ b/keyboards/handwired/tennie/config.h @@ -18,11 +18,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #pragma once #define RGBW - #define RGBLED_NUM 1 - #define RGBLIGHT_HUE_STEP 8 - #define RGBLIGHT_SAT_STEP 8 - #define RGBLIGHT_VAL_STEP 8 -// #define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */ #define RGBLIGHT_EFFECT_BREATHING #define RGBLIGHT_EFFECT_RAINBOW_MOOD #define RGBLIGHT_EFFECT_RAINBOW_SWIRL diff --git a/keyboards/handwired/tennie/info.json b/keyboards/handwired/tennie/info.json index a48d64f730..241bacd95f 100644 --- a/keyboards/handwired/tennie/info.json +++ b/keyboards/handwired/tennie/info.json @@ -8,6 +8,11 @@ "pid": "0x1313", "device_version": "0.0.1" }, + "rgblight": { + "saturation_steps": 8, + "brightness_steps": 8, + "led_count": 1 + }, "ws2812": { "pin": "D1" }, diff --git a/keyboards/handwired/terminus_mini/config.h b/keyboards/handwired/terminus_mini/config.h index 50ee7eac61..6243804dc5 100644 --- a/keyboards/handwired/terminus_mini/config.h +++ b/keyboards/handwired/terminus_mini/config.h @@ -17,12 +17,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #pragma once -//define tapping-toggle count -#define TAPPING_TOGGLE 1 - -//define maximum duration of hold required to register a tap vs hold default is 200 -#define TAPPING_TERM 150 //reduce time required to register a held key - /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ #define LOCKING_SUPPORT_ENABLE /* Locking resynchronize hack */ diff --git a/keyboards/handwired/terminus_mini/info.json b/keyboards/handwired/terminus_mini/info.json index 6948b13edc..5593be8bb7 100644 --- a/keyboards/handwired/terminus_mini/info.json +++ b/keyboards/handwired/terminus_mini/info.json @@ -8,6 +8,10 @@ "pid": "0x6060", "device_version": "0.0.1" }, + "tapping": { + "term": 150, + "toggle": 1 + }, "matrix_pins": { "cols": ["B0", "D0", "D5", "B6", "D4", "C7", "F7", "F6", "F5", "F4", "F1", "F0"], "rows": ["B5", "B4", "D7", "D6"] diff --git a/keyboards/handwired/tractyl_manuform/5x6_right/elite_c/config.h b/keyboards/handwired/tractyl_manuform/5x6_right/elite_c/config.h index a0355469e9..af4b3c0ac0 100644 --- a/keyboards/handwired/tractyl_manuform/5x6_right/elite_c/config.h +++ b/keyboards/handwired/tractyl_manuform/5x6_right/elite_c/config.h @@ -18,12 +18,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #pragma once -// WS2812 RGB LED strip input and number of LEDs -#define RGBLED_NUM 20 -#define RGBLIGHT_SPLIT -#define RGBLED_SPLIT \ - { 10, 10 } - #define AUDIO_PIN C6 #define EE_HANDS diff --git a/keyboards/handwired/tractyl_manuform/5x6_right/elite_c/info.json b/keyboards/handwired/tractyl_manuform/5x6_right/elite_c/info.json index e0d074c2b6..92e0baace1 100644 --- a/keyboards/handwired/tractyl_manuform/5x6_right/elite_c/info.json +++ b/keyboards/handwired/tractyl_manuform/5x6_right/elite_c/info.json @@ -17,7 +17,9 @@ "pin": "D3" }, "rgblight": { - "max_brightness": 80 + "led_count": 20, + "max_brightness": 80, + "split_count": [10, 10] }, "processor": "atmega32u4", "bootloader": "atmel-dfu" diff --git a/keyboards/handwired/tractyl_manuform/5x6_right/f303/config.h b/keyboards/handwired/tractyl_manuform/5x6_right/f303/config.h index 2d05b71c92..3a7f97f8d2 100644 --- a/keyboards/handwired/tractyl_manuform/5x6_right/f303/config.h +++ b/keyboards/handwired/tractyl_manuform/5x6_right/f303/config.h @@ -29,11 +29,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. // #define WS2812_DMA_STREAM STM32_DMA1_STREAM3 // DMA Stream for TIMx_UP, see the respective reference manual for the appropriate values for your MCU. #define WS2812_DMA_CHANNEL 3 // DMA Channel for TIMx_UP, see the respective reference manual for the appropriate values for your MCU. -#define RGBLED_NUM 20 -#define RGBLIGHT_SPLIT -#define RGBLED_SPLIT \ - { 10, 10 } - #define DEBUG_LED_PIN C13 /* Audio config */ diff --git a/keyboards/handwired/tractyl_manuform/5x6_right/f303/info.json b/keyboards/handwired/tractyl_manuform/5x6_right/f303/info.json index 0e0e020ddf..62fa261ac7 100644 --- a/keyboards/handwired/tractyl_manuform/5x6_right/f303/info.json +++ b/keyboards/handwired/tractyl_manuform/5x6_right/f303/info.json @@ -5,6 +5,10 @@ "rows": ["B10", "B11", "B12", "A14", "A13", "A15"] }, "diode_direction": "COL2ROW", + "rgblight": { + "led_count": 20, + "split_count": [10, 10] + }, "ws2812": { "pin": "A6", "driver": "pwm" diff --git a/keyboards/handwired/tractyl_manuform/5x6_right/f411/config.h b/keyboards/handwired/tractyl_manuform/5x6_right/f411/config.h index 73ea40fb76..2ad18267ad 100644 --- a/keyboards/handwired/tractyl_manuform/5x6_right/f411/config.h +++ b/keyboards/handwired/tractyl_manuform/5x6_right/f411/config.h @@ -31,12 +31,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #define WS2812_DMA_CHANNEL 3 // DMA Channel for TIMx_UP, see the respective reference manual for the appropriate values for your MCU. #define WS2812_PWM_TARGET_PERIOD 800000 - -#define RGBLED_NUM 57 -#define RGBLIGHT_SPLIT -#define RGBLED_SPLIT \ - { 26, 31 } - #define DEBUG_LED_PIN C13 /* Audio config */ diff --git a/keyboards/handwired/tractyl_manuform/5x6_right/f411/info.json b/keyboards/handwired/tractyl_manuform/5x6_right/f411/info.json index 671e3746c6..dff5fec4a5 100644 --- a/keyboards/handwired/tractyl_manuform/5x6_right/f411/info.json +++ b/keyboards/handwired/tractyl_manuform/5x6_right/f411/info.json @@ -5,6 +5,10 @@ "rows": ["B12", "B13", "B14", "B15", "A8", "A10"] }, "diode_direction": "COL2ROW", + "rgblight": { + "led_count": 57, + "split_count": [26, 31] + }, "ws2812": { "pin": "A1", "driver": "pwm" diff --git a/keyboards/handwired/tractyl_manuform/5x6_right/teensy2pp/config.h b/keyboards/handwired/tractyl_manuform/5x6_right/teensy2pp/config.h index ce8e65e924..769a348e65 100644 --- a/keyboards/handwired/tractyl_manuform/5x6_right/teensy2pp/config.h +++ b/keyboards/handwired/tractyl_manuform/5x6_right/teensy2pp/config.h @@ -18,11 +18,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #pragma once -// WS2812 RGB LED strip input and number of LEDs -#define RGBLED_NUM 20 -#define RGBLIGHT_SPLIT -#define RGBLED_SPLIT \ - { 10, 10 } #define RGBLIGHT_LIMIT_VAL 80 #define DEBUG_LED_PIN D6 diff --git a/keyboards/handwired/tractyl_manuform/5x6_right/teensy2pp/info.json b/keyboards/handwired/tractyl_manuform/5x6_right/teensy2pp/info.json index c65b226601..a131ac085b 100644 --- a/keyboards/handwired/tractyl_manuform/5x6_right/teensy2pp/info.json +++ b/keyboards/handwired/tractyl_manuform/5x6_right/teensy2pp/info.json @@ -17,7 +17,9 @@ "pin": "E7" }, "rgblight": { - "max_brightness": 80 + "led_count": 20, + "max_brightness": 80, + "split_count": [10, 10] }, "processor": "at90usb1286", "bootloader": "halfkay" diff --git a/keyboards/handwired/traveller/config.h b/keyboards/handwired/traveller/config.h deleted file mode 100644 index f015683e68..0000000000 --- a/keyboards/handwired/traveller/config.h +++ /dev/null @@ -1,40 +0,0 @@ -/* -Copyright 2012 Jun Wako <wakojun@gmail.com> - -This program is free software: you can redistribute it and/or modify -it under the terms of the GNU General Public License as published by -the Free Software Foundation, either version 2 of the License, or -(at your option) any later version. - -This program is distributed in the hope that it will be useful, -but WITHOUT ANY WARRANTY; without even the implied warranty of -MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -GNU General Public License for more details. - -You should have received a copy of the GNU General Public License -along with this program. If not, see <http://www.gnu.org/licenses/>. -*/ - -#pragma once - -# define RGBLED_NUM 1 -# define RGBLIGHT_HUE_STEP 10 -# define RGBLIGHT_SAT_STEP 17 -# define RGBLIGHT_VAL_STEP 17 -//# define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */ - -/* - * Feature disable options - * These options are also useful to firmware size reduction. - */ - -/* disable debug print */ -//#define NO_DEBUG - -/* disable print */ -//#define NO_PRINT - -/* disable action features */ -//#define NO_ACTION_LAYER -//#define NO_ACTION_TAPPING -//#define NO_ACTION_ONESHOT diff --git a/keyboards/handwired/traveller/info.json b/keyboards/handwired/traveller/info.json index 91fe9e1cf4..ea1b3e3530 100644 --- a/keyboards/handwired/traveller/info.json +++ b/keyboards/handwired/traveller/info.json @@ -8,6 +8,10 @@ "pid": "0x6060", "device_version": "0.0.1" }, + "rgblight": { + "hue_steps": 10, + "led_count": 1 + }, "ws2812": { "pin": "B2" }, diff --git a/keyboards/handwired/tritium_numpad/config.h b/keyboards/handwired/tritium_numpad/config.h index 838776b5eb..b9449c4714 100644 --- a/keyboards/handwired/tritium_numpad/config.h +++ b/keyboards/handwired/tritium_numpad/config.h @@ -22,10 +22,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. /* Locking resynchronize hack */ #define LOCKING_RESYNC_ENABLE -/* Underlight configuration - */ -#define RGBLED_NUM 4 // Number of LEDs - /* * Feature disable options * These options are also useful to firmware size reduction. diff --git a/keyboards/handwired/tritium_numpad/info.json b/keyboards/handwired/tritium_numpad/info.json index 8f56d90947..2e2fc6c81f 100644 --- a/keyboards/handwired/tritium_numpad/info.json +++ b/keyboards/handwired/tritium_numpad/info.json @@ -21,6 +21,9 @@ "num_lock": "D5", "on_state": 0 }, + "rgblight": { + "led_count": 4 + }, "ws2812": { "pin": "D2" }, diff --git a/keyboards/handwired/tsubasa/config.h b/keyboards/handwired/tsubasa/config.h index dee2156fb5..52087ea54b 100644 --- a/keyboards/handwired/tsubasa/config.h +++ b/keyboards/handwired/tsubasa/config.h @@ -18,12 +18,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #pragma once #define MASTER_RIGHT -# define RGBLED_NUM 12 -# define RGBLIGHT_SPLIT -# define RGBLED_SPLIT {6, 6} -# define RGBLIGHT_HUE_STEP 8 -# define RGBLIGHT_SAT_STEP 1 -# define RGBLIGHT_VAL_STEP 1 # define RGBLIGHT_EFFECT_BREATHING # define RGBLIGHT_EFFECT_RAINBOW_MOOD # define RGBLIGHT_EFFECT_RAINBOW_SWIRL diff --git a/keyboards/handwired/tsubasa/info.json b/keyboards/handwired/tsubasa/info.json index 1c374f3b08..f5e2ecd126 100644 --- a/keyboards/handwired/tsubasa/info.json +++ b/keyboards/handwired/tsubasa/info.json @@ -8,6 +8,12 @@ "pid": "0x0000", "device_version": "1.0.0" }, + "rgblight": { + "saturation_steps": 1, + "brightness_steps": 1, + "led_count": 12, + "split_count": [6, 6] + }, "ws2812": { "pin": "D2" }, diff --git a/keyboards/handwired/twadlee/tp69/rules.mk b/keyboards/handwired/twadlee/tp69/rules.mk index b1b6b8e616..b73afc0e44 100644 --- a/keyboards/handwired/twadlee/tp69/rules.mk +++ b/keyboards/handwired/twadlee/tp69/rules.mk @@ -14,5 +14,3 @@ PS2_MOUSE_ENABLE = no USE_CHIBIOS_CONTRIB = yes -# Enter lower-power sleep mode when on the ChibiOS idle thread -OPT_DEFS += -DCORTEX_ENABLE_WFI_IDLE=TRUE diff --git a/keyboards/handwired/twig/twig50/config.h b/keyboards/handwired/twig/twig50/config.h index d3d188ef42..e4347a75b5 100644 --- a/keyboards/handwired/twig/twig50/config.h +++ b/keyboards/handwired/twig/twig50/config.h @@ -3,8 +3,6 @@ #pragma once -#define TAPPING_TERM 150 - #ifdef AUDIO_ENABLE #define AUDIO_PIN A5 #define AUDIO_PIN_ALT A4 diff --git a/keyboards/handwired/twig/twig50/info.json b/keyboards/handwired/twig/twig50/info.json index c32734cecb..24eb51d03c 100644 --- a/keyboards/handwired/twig/twig50/info.json +++ b/keyboards/handwired/twig/twig50/info.json @@ -9,6 +9,9 @@ "device_version": "0.2.1", "force_nkro": true }, + "tapping": { + "term": 150 + }, "matrix_pins": { "cols": ["A2", "A1", "A0", "B8", "B13", "B14", "B15", "B9", "B10", "B11", "B3", "B2", "B1", "B0"], "rows": ["B7", "B6", "B5", "B4"] diff --git a/keyboards/handwired/unk/rev1/config.h b/keyboards/handwired/unk/rev1/config.h index de1208a7ec..2a7f301a6a 100644 --- a/keyboards/handwired/unk/rev1/config.h +++ b/keyboards/handwired/unk/rev1/config.h @@ -25,8 +25,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. /* Locking resynchronize hack */ #define LOCKING_RESYNC_ENABLE -#define RGBLED_NUM 12 // Number of LEDs - /* * Feature disable options * These options are also useful to firmware size reduction. diff --git a/keyboards/handwired/unk/rev1/info.json b/keyboards/handwired/unk/rev1/info.json index 162faca32c..171ae7bb02 100644 --- a/keyboards/handwired/unk/rev1/info.json +++ b/keyboards/handwired/unk/rev1/info.json @@ -8,6 +8,9 @@ "pid": "0x3060", "device_version": "0.0.1" }, + "rgblight": { + "led_count": 12 + }, "ws2812": { "pin": "D3" }, diff --git a/keyboards/handwired/uthol/rev2/config.h b/keyboards/handwired/uthol/rev2/config.h index bf9b590421..f4c4fda7cf 100644 --- a/keyboards/handwired/uthol/rev2/config.h +++ b/keyboards/handwired/uthol/rev2/config.h @@ -18,5 +18,4 @@ #pragma once //RGB Stuff -#define RGBLED_NUM 39 #define RGBLIGHT_DEFAULT_HUE 201 diff --git a/keyboards/handwired/uthol/rev2/info.json b/keyboards/handwired/uthol/rev2/info.json index 7c46269579..89515a8fef 100644 --- a/keyboards/handwired/uthol/rev2/info.json +++ b/keyboards/handwired/uthol/rev2/info.json @@ -3,6 +3,9 @@ "usb": { "device_version": "0.0.2" }, + "rgblight": { + "led_count": 39 + }, "ws2812": { "pin": "E6" }, diff --git a/keyboards/handwired/uthol/rev3/config.h b/keyboards/handwired/uthol/rev3/config.h index dd7ef6a5a9..4e58bd9da4 100644 --- a/keyboards/handwired/uthol/rev3/config.h +++ b/keyboards/handwired/uthol/rev3/config.h @@ -31,11 +31,9 @@ /* Locking resynchronize hack */ #define LOCKING_RESYNC_ENABLE -#define TAPPING_TERM 500 #define PERMISSIVE_HOLD // RGB Stuff -#define RGBLED_NUM 39 #define RGBLIGHT_EFFECT_BREATHING #define RGBLIGHT_EFFECT_RAINBOW_MOOD #define RGBLIGHT_EFFECT_RAINBOW_SWIRL diff --git a/keyboards/handwired/uthol/rev3/info.json b/keyboards/handwired/uthol/rev3/info.json index 5ba12dc846..74d26c15a5 100644 --- a/keyboards/handwired/uthol/rev3/info.json +++ b/keyboards/handwired/uthol/rev3/info.json @@ -3,6 +3,12 @@ "usb": { "device_version": "0.0.3" }, + "rgblight": { + "led_count": 39 + }, + "tapping": { + "term": 500 + }, "ws2812": { "pin": "B0" }, diff --git a/keyboards/handwired/wulkan/keymaps/default/keymap.c b/keyboards/handwired/wulkan/keymaps/default/keymap.c index b73592760e..3a333198a4 100644 --- a/keyboards/handwired/wulkan/keymaps/default/keymap.c +++ b/keyboards/handwired/wulkan/keymaps/default/keymap.c @@ -95,8 +95,8 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { * `-----------------------------------------------------------------------------------' */ [_ADJUST] = LAYOUT_ortho_4x12( - _______, QK_BOOT, _______, _______, KC_WH_U, _______, _______, KC_MS_U, _______, _______, XP(SE_ARNG_LOW, SE_ARNG_HIGH), KC_DEL, - _______, _______, _______, _______, KC_WH_D, _______, KC_MS_L, KC_MS_D, KC_MS_R, XP(SE_ODIA_LOW, SE_ODIA_HIGH), XP(SE_ADIA_LOW, SE_ADIA_HIGH), _______, + _______, QK_BOOT, _______, _______, KC_WH_U, _______, _______, KC_MS_U, _______, _______, UP(SE_ARNG_LOW, SE_ARNG_HIGH), KC_DEL, + _______, _______, _______, _______, KC_WH_D, _______, KC_MS_L, KC_MS_D, KC_MS_R, UP(SE_ODIA_LOW, SE_ODIA_HIGH), UP(SE_ADIA_LOW, SE_ADIA_HIGH), _______, _______, KC_ACL0, KC_ACL1, KC_ACL2, _______, _______, KC_BTN1, _______, KC_BTN2, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______ ) diff --git a/keyboards/handwired/z150/rules.mk b/keyboards/handwired/z150/rules.mk index 8e7bef8b5c..421d72570e 100644 --- a/keyboards/handwired/z150/rules.mk +++ b/keyboards/handwired/z150/rules.mk @@ -1,5 +1,3 @@ -# Enter lower-power sleep mode when on the ChibiOS idle thread -OPT_DEFS += -DCORTEX_ENABLE_WFI_IDLE=TRUE # Build Options # change yes to no to disable diff --git a/keyboards/helix/pico/config.h b/keyboards/helix/pico/config.h index cf4e9f4ffe..f5eb4c13e1 100644 --- a/keyboards/helix/pico/config.h +++ b/keyboards/helix/pico/config.h @@ -20,7 +20,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #pragma once #define QUICK_TAP_TERM 0 -#define TAPPING_TERM 100 #define SERIAL_SLAVE_BUFFER_LENGTH ((MATRIX_ROWS)/2) #define SERIAL_MASTER_BUFFER_LENGTH ((MATRIX_ROWS)/2) @@ -48,8 +47,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #define AUDIO_PIN B5 #endif -//#define RGBLED_NUM 12 // Number of LEDs. see ./keymaps/default/config.h - // Helix keyboard RGB LED support // see ./rules.mk: LED_BACK_ENABLE or LED_UNDERGLOW_ENABLE set yes #ifdef RGBLED_BACK @@ -73,8 +70,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #endif #define RGBLIGHT_VAL_STEP 4 #endif -#define RGBLIGHT_HUE_STEP 10 -#define RGBLIGHT_SAT_STEP 17 #if defined(RGBLIGHT_ENABLE) && !defined(IOS_DEVICE_ENABLE) // USB_MAX_POWER_CONSUMPTION value for Helix keyboard diff --git a/keyboards/helix/pico/info.json b/keyboards/helix/pico/info.json index 1147d09f37..34305944bd 100644 --- a/keyboards/helix/pico/info.json +++ b/keyboards/helix/pico/info.json @@ -11,6 +11,12 @@ "split": { "soft_serial_pin": "D2" }, + "tapping": { + "term": 100 + }, + "rgblight": { + "hue_steps": 10 + }, "ws2812": { "pin": "D3" }, diff --git a/keyboards/helix/rev2/config.h b/keyboards/helix/rev2/config.h index 1d71636757..212d0e1e38 100644 --- a/keyboards/helix/rev2/config.h +++ b/keyboards/helix/rev2/config.h @@ -20,7 +20,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #pragma once #define QUICK_TAP_TERM 0 -#define TAPPING_TERM 100 #define SPLIT_LAYER_STATE_ENABLE #define SPLIT_LED_STATE_ENABLE @@ -55,8 +54,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #endif #define RGBLIGHT_VAL_STEP 4 #endif -#define RGBLIGHT_HUE_STEP 10 -#define RGBLIGHT_SAT_STEP 17 #if defined(RGBLIGHT_ENABLE) && !defined(IOS_DEVICE_ENABLE) // USB_MAX_POWER_CONSUMPTION value for Helix keyboard diff --git a/keyboards/helix/rev2/info.json b/keyboards/helix/rev2/info.json index 105b05e6e3..0cdc10815d 100644 --- a/keyboards/helix/rev2/info.json +++ b/keyboards/helix/rev2/info.json @@ -16,6 +16,12 @@ "split": { "soft_serial_pin": "D2" }, + "tapping": { + "term": 100 + }, + "rgblight": { + "hue_steps": 10 + }, "ws2812": { "pin": "D3" }, diff --git a/keyboards/helix/rev2/keymaps/edvorakjp/oled.c b/keyboards/helix/rev2/keymaps/edvorakjp/oled.c index 14e3e5533b..38a91c1639 100644 --- a/keyboards/helix/rev2/keymaps/edvorakjp/oled.c +++ b/keyboards/helix/rev2/keymaps/edvorakjp/oled.c @@ -5,13 +5,9 @@ #ifdef OLED_ENABLE void render_host_led_state(void) { char led_state_str[24]; - uint8_t leds = host_keyboard_leds(); + led_t led_state = host_keyboard_led_state(); - bool is_num_lock_enabled = leds & (1 << USB_LED_NUM_LOCK); - bool is_caps_lock_enabled = leds & (1 << USB_LED_CAPS_LOCK); - bool is_scroll_lock_enabled = leds & (1 << USB_LED_SCROLL_LOCK); - - snprintf(led_state_str, sizeof(led_state_str), "NL:%s CL:%s SL:%s", is_num_lock_enabled ? "on" : "- ", is_caps_lock_enabled ? "on" : "- ", is_scroll_lock_enabled ? "on" : "- "); + snprintf(led_state_str, sizeof(led_state_str), "NL:%s CL:%s SL:%s", led_state.num_lock ? "on" : "- ", led_state.caps_lock ? "on" : "- ", led_state.scroll_lock ? "on" : "- "); oled_write(led_state_str, false); } diff --git a/keyboards/helix/rev2/keymaps/five_rows_jis/keymap.c b/keyboards/helix/rev2/keymaps/five_rows_jis/keymap.c index 32b446c498..ff7b174f5b 100644 --- a/keyboards/helix/rev2/keymaps/five_rows_jis/keymap.c +++ b/keyboards/helix/rev2/keymaps/five_rows_jis/keymap.c @@ -205,7 +205,7 @@ const char code_to_name[60] = { static inline void set_keylog(uint16_t keycode, keyrecord_t *record) { char name = ' '; - uint8_t leds = host_keyboard_leds(); + led_t led_state = host_keyboard_led_state(); if (keycode < 60) { @@ -218,9 +218,9 @@ static inline void set_keylog(uint16_t keycode, keyrecord_t *record) record->event.key.col, keycode, name, - (leds & (1<<USB_LED_NUM_LOCK)) ? 'N' : ' ', - (leds & (1<<USB_LED_CAPS_LOCK)) ? 'C' : ' ', - (leds & (1<<USB_LED_SCROLL_LOCK)) ? 'S' : ' ' + led_state.num_lock ? 'N' : ' ', + led_state.caps_lock ? 'C' : ' ', + led_state.scroll_lock ? 'S' : ' ' ); } #endif diff --git a/keyboards/helix/rev2/keymaps/froggy/keymap.c b/keyboards/helix/rev2/keymaps/froggy/keymap.c index 8463365f59..c29c5832de 100644 --- a/keyboards/helix/rev2/keymaps/froggy/keymap.c +++ b/keyboards/helix/rev2/keymaps/froggy/keymap.c @@ -704,9 +704,10 @@ void render_status(struct CharacterMatrix *matrix) { int rows = 0; //Set Indicator icon - if (host_keyboard_leds() & (1<<USB_LED_NUM_LOCK)) { rown = 4; } else { rown = 0; } - if (host_keyboard_leds() & (1<<USB_LED_CAPS_LOCK)) { rowa = 4; } else { rowa = 0; } - if (host_keyboard_leds() & (1<<USB_LED_SCROLL_LOCK)) { rows = 4; } else { rows = 0; } + led_t led_state = host_keyboard_led_state(); + if (led_state.num_lock) { rown = 4; } else { rown = 0; } + if (led_state.caps_lock) { rowa = 4; } else { rowa = 0; } + if (led_state.scroll_lock) { rows = 4; } else { rows = 0; } if (layer_state == L_FUNC) { rowf = 4; } matrix_write(matrix, indctr[rown] [0]); @@ -813,9 +814,10 @@ void render_status(void) { int rows = 0; //Set Indicator icon - if (host_keyboard_leds() & (1<<USB_LED_NUM_LOCK)) { rown = 4; } else { rown = 0; } - if (host_keyboard_leds() & (1<<USB_LED_CAPS_LOCK)) { rowa = 4; } else { rowa = 0; } - if (host_keyboard_leds() & (1<<USB_LED_SCROLL_LOCK)) { rows = 4; } else { rows = 0; } + led_t led_state = host_keyboard_led_state(); + if (led_state.num_lock) { rown = 4; } else { rown = 0; } + if (led_state.caps_lock) { rowa = 4; } else { rowa = 0; } + if (led_state.scroll_lock) { rows = 4; } else { rows = 0; } if (layer_state == L_FUNC) { rowf = 4; } oled_write(indctr[rown] [0], false); diff --git a/keyboards/helix/rev2/keymaps/froggy_106/keymap.c b/keyboards/helix/rev2/keymaps/froggy_106/keymap.c index a370c21ea2..b9c6aa2324 100644 --- a/keyboards/helix/rev2/keymaps/froggy_106/keymap.c +++ b/keyboards/helix/rev2/keymaps/froggy_106/keymap.c @@ -782,9 +782,10 @@ void render_status(struct CharacterMatrix *matrix) { int rowj = 1; //Set Indicator icon - if (host_keyboard_leds() & (1<<USB_LED_NUM_LOCK)) { rown = 4; } - if (host_keyboard_leds() & (1<<USB_LED_CAPS_LOCK)) { rowa = 4; } - if (host_keyboard_leds() & (1<<USB_LED_SCROLL_LOCK)) { rows = 4; } + led_t led_state = host_keyboard_led_state(); + if (led_state.num_lock) { rown = 4; } + if (led_state.caps_lock) { rowa = 4; } + if (led_state.scroll_lock) { rows = 4; } if (IS_LAYER_ON(_FUNC)) { rowf = 4; } //Set Mode icon @@ -909,9 +910,10 @@ void render_status(void) { int rowj = 1; //Set Indicator icon - if (host_keyboard_leds() & (1<<USB_LED_NUM_LOCK)) { rown = 4; } - if (host_keyboard_leds() & (1<<USB_LED_CAPS_LOCK)) { rowa = 4; } - if (host_keyboard_leds() & (1<<USB_LED_SCROLL_LOCK)) { rows = 4; } + led_t led_state = host_keyboard_led_state(); + if (led_state.num_lock) { rown = 4; } + if (led_state.caps_lock) { rowa = 4; } + if (led_state.scroll_lock) { rows = 4; } if (IS_LAYER_ON(_FUNC)) { rowf = 4; } //Set Mode icon diff --git a/keyboards/helix/rev2/keymaps/yshrsmz/keymap.c b/keyboards/helix/rev2/keymaps/yshrsmz/keymap.c index b3ae8a3d25..1fc5dfba99 100644 --- a/keyboards/helix/rev2/keymaps/yshrsmz/keymap.c +++ b/keyboards/helix/rev2/keymaps/yshrsmz/keymap.c @@ -459,12 +459,10 @@ void render_status(struct CharacterMatrix *matrix) { matrix_write_P(matrix, PSTR("\n")); // Host Keyboard LED Status - matrix_write_P(matrix, (host_keyboard_leds() & (1<<USB_LED_NUM_LOCK)) ? - PSTR("NUMLOCK") : PSTR(" ")); - matrix_write_P(matrix, (host_keyboard_leds() & (1<<USB_LED_CAPS_LOCK)) ? - PSTR("CAPS") : PSTR(" ")); - matrix_write_P(matrix, (host_keyboard_leds() & (1<<USB_LED_SCROLL_LOCK)) ? - PSTR("SCLK") : PSTR(" ")); + led_t led_state = host_keyboard_led_state(); + matrix_write_P(matrix, led_state.num_lock ? PSTR("NUMLOCK") : PSTR(" ")); + matrix_write_P(matrix, led_state.caps_lock ? PSTR("CAPS") : PSTR(" ")); + matrix_write_P(matrix, led_state.scroll_lock ? PSTR("SCLK") : PSTR(" ")); matrix_write_P(matrix, PSTR("\n")); render_rgbled_status(true, matrix); } @@ -580,12 +578,10 @@ void render_status(void) { render_layer_status(); // Host Keyboard LED Status - oled_write_P((host_keyboard_leds() & (1<<USB_LED_NUM_LOCK)) ? - PSTR("NUMLOCK") : PSTR(" "), false); - oled_write_P((host_keyboard_leds() & (1<<USB_LED_CAPS_LOCK)) ? - PSTR("CAPS") : PSTR(" "), false); - oled_write_P((host_keyboard_leds() & (1<<USB_LED_SCROLL_LOCK)) ? - PSTR("SCLK") : PSTR(" "), false); + led_t led_state = host_keyboard_led_state(); + oled_write_P(led_state.num_lock ? PSTR("NUMLOCK") : PSTR(" "), false); + oled_write_P(led_state.caps_lock ? PSTR("CAPS") : PSTR(" "), false); + oled_write_P(led_state.scroll_lock ? PSTR("SCLK") : PSTR(" "), false); oled_write_P(PSTR("\n"), false); render_rgbled_status(true); oled_write_P(PSTR("\n"), false); diff --git a/keyboards/helix/rev3_4rows/config.h b/keyboards/helix/rev3_4rows/config.h index 2eda425a4f..712d95ebcd 100644 --- a/keyboards/helix/rev3_4rows/config.h +++ b/keyboards/helix/rev3_4rows/config.h @@ -46,10 +46,8 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. /* Dip switch on matrix grid */ #define DIP_SWITCH_MATRIX_GRID { {0,6}, {1,6}, {5,6}, {6,6} } -#define RGBLED_NUM 50 // Number of LEDs - #ifdef RGB_MATRIX_ENABLE - #define RGB_MATRIX_LED_COUNT RGBLED_NUM + #define RGB_MATRIX_LED_COUNT 50 # define RGB_MATRIX_KEYPRESSES // reacts to keypresses // # define RGB_MATRIX_KEYRELEASES // reacts to keyreleases (instead of keypresses) # define RGB_DISABLE_WHEN_USB_SUSPENDED // turn off effects when suspended @@ -57,19 +55,9 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. // # define RGB_MATRIX_LED_PROCESS_LIMIT (RGB_MATRIX_LED_COUNT + 4) / 5 // limits the number of LEDs to process in an animation per task run (increases keyboard responsiveness) // # define RGB_MATRIX_LED_FLUSH_LIMIT 16 // limits in milliseconds how frequently an animation will update the LEDs. 16 (16ms) is equivalent to limiting to 60fps (increases keyboard responsiveness) # define RGB_MATRIX_MAXIMUM_BRIGHTNESS 150 // limits maximum brightness of LEDs to 150 out of 255. Higher may cause the controller to crash. -# define RGB_MATRIX_HUE_STEP 8 -# define RGB_MATRIX_SAT_STEP 8 -# define RGB_MATRIX_VAL_STEP 8 -# define RGB_MATRIX_SPD_STEP 10 #endif #ifdef RGBLIGHT_ENABLE - #define RGBLIGHT_SPLIT - #define RGBLED_SPLIT { 25, 25 } -// #define RGBLIGHT_HUE_STEP 8 -// #define RGBLIGHT_SAT_STEP 8 -// #define RGBLIGHT_VAL_STEP 8 -// #define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */ // #define RGBLIGHT_EFFECT_BREATHING #define RGBLIGHT_EFFECT_RAINBOW_MOOD #define RGBLIGHT_EFFECT_RAINBOW_SWIRL diff --git a/keyboards/helix/rev3_4rows/info.json b/keyboards/helix/rev3_4rows/info.json index 9a832bbb5b..7c8042bb5e 100644 --- a/keyboards/helix/rev3_4rows/info.json +++ b/keyboards/helix/rev3_4rows/info.json @@ -9,7 +9,10 @@ "device_version": "0.0.1" }, "rgb_matrix": { - "driver": "WS2812" + "driver": "WS2812", + "sat_steps": 8, + "val_steps": 8, + "speed_steps": 10 }, "encoder": { "rotary": [ @@ -23,7 +26,9 @@ "pin": "D3" }, "rgblight": { - "max_brightness": 120 + "led_count": 50, + "max_brightness": 120, + "split_count": [25, 25] }, "processor": "atmega32u4", "bootloader": "caterina", diff --git a/keyboards/helix/rev3_5rows/config.h b/keyboards/helix/rev3_5rows/config.h index bd09cc60ab..658b3bcd4c 100644 --- a/keyboards/helix/rev3_5rows/config.h +++ b/keyboards/helix/rev3_5rows/config.h @@ -46,10 +46,8 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. /* Dip switch on matrix grid */ #define DIP_SWITCH_MATRIX_GRID { {0,6}, {1,6}, {5,6}, {6,6} } -#define RGBLED_NUM 64 // Number of LEDs - #ifdef RGB_MATRIX_ENABLE - #define RGB_MATRIX_LED_COUNT RGBLED_NUM + #define RGB_MATRIX_LED_COUNT 64 # define RGB_MATRIX_KEYPRESSES // reacts to keypresses // # define RGB_MATRIX_KEYRELEASES // reacts to keyreleases (instead of keypresses) # define RGB_DISABLE_WHEN_USB_SUSPENDED // turn off effects when suspended @@ -57,19 +55,9 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. // # define RGB_MATRIX_LED_PROCESS_LIMIT (RGB_MATRIX_LED_COUNT + 4) / 5 // limits the number of LEDs to process in an animation per task run (increases keyboard responsiveness) // # define RGB_MATRIX_LED_FLUSH_LIMIT 16 // limits in milliseconds how frequently an animation will update the LEDs. 16 (16ms) is equivalent to limiting to 60fps (increases keyboard responsiveness) # define RGB_MATRIX_MAXIMUM_BRIGHTNESS 150 // limits maximum brightness of LEDs to 150 out of 255. Higher may cause the controller to crash. -# define RGB_MATRIX_HUE_STEP 8 -# define RGB_MATRIX_SAT_STEP 8 -# define RGB_MATRIX_VAL_STEP 8 -# define RGB_MATRIX_SPD_STEP 10 #endif #ifdef RGBLIGHT_ENABLE - #define RGBLIGHT_SPLIT - #define RGBLED_SPLIT { 32, 32 } -// #define RGBLIGHT_HUE_STEP 8 -// #define RGBLIGHT_SAT_STEP 8 -// #define RGBLIGHT_VAL_STEP 8 -// #define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */ // #define RGBLIGHT_EFFECT_BREATHING #define RGBLIGHT_EFFECT_RAINBOW_MOOD #define RGBLIGHT_EFFECT_RAINBOW_SWIRL diff --git a/keyboards/helix/rev3_5rows/info.json b/keyboards/helix/rev3_5rows/info.json index 2ae80dd901..12a4b618e2 100644 --- a/keyboards/helix/rev3_5rows/info.json +++ b/keyboards/helix/rev3_5rows/info.json @@ -9,7 +9,10 @@ "device_version": "0.0.1" }, "rgb_matrix": { - "driver": "WS2812" + "driver": "WS2812", + "sat_steps": 8, + "val_steps": 8, + "speed_steps": 10 }, "encoder": { "rotary": [ @@ -23,7 +26,9 @@ "pin": "D3" }, "rgblight": { - "max_brightness": 120 + "led_count": 64, + "max_brightness": 120, + "split_count": [32, 32] }, "processor": "atmega32u4", "bootloader": "caterina", diff --git a/keyboards/hfdkb/ac001/config.h b/keyboards/hfdkb/ac001/config.h index 899a134762..6c0c2a2cf6 100644 --- a/keyboards/hfdkb/ac001/config.h +++ b/keyboards/hfdkb/ac001/config.h @@ -16,8 +16,6 @@ #pragma once -#define TAP_CODE_DELAY 5 - /* ws2812 RGB LED */ #define RGB_MATRIX_LED_COUNT 5 diff --git a/keyboards/hfdkb/ac001/info.json b/keyboards/hfdkb/ac001/info.json index 2efee90deb..229bee6ff4 100644 --- a/keyboards/hfdkb/ac001/info.json +++ b/keyboards/hfdkb/ac001/info.json @@ -20,6 +20,9 @@ "ws2812": { "pin": "A1" }, + "qmk": { + "tap_keycode_delay": 5 + }, "processor": "WB32FQ95", "bootloader": "wb32-dfu", "layouts": { diff --git a/keyboards/hhkb/ansi/config.h b/keyboards/hhkb/ansi/config.h index 723fe29479..7fe9f1f9db 100644 --- a/keyboards/hhkb/ansi/config.h +++ b/keyboards/hhkb/ansi/config.h @@ -22,8 +22,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #define MATRIX_ROWS 8 #define MATRIX_COLS 8 -#define TAPPING_TERM 200 - /* * Feature disable options * These options are also useful to firmware size reduction. diff --git a/keyboards/hhkb/jp/config.h b/keyboards/hhkb/jp/config.h index 9de64724b7..88b9c9b6cc 100644 --- a/keyboards/hhkb/jp/config.h +++ b/keyboards/hhkb/jp/config.h @@ -22,8 +22,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #define MATRIX_ROWS 16 #define MATRIX_COLS 8 -#define TAPPING_TERM 200 - /* * Feature disable options * These options are also useful to firmware size reduction. diff --git a/keyboards/hidtech/bastyl/config.h b/keyboards/hidtech/bastyl/config.h index 48ac76c74b..b544871c2e 100644 --- a/keyboards/hidtech/bastyl/config.h +++ b/keyboards/hidtech/bastyl/config.h @@ -18,8 +18,6 @@ #pragma once -#define RGBLED_NUM 38 -#define RGBLIGHT_SPLIT #define RGBLIGHT_EFFECT_BREATHING #define RGBLIGHT_EFFECT_RAINBOW_MOOD #define RGBLIGHT_EFFECT_RAINBOW_SWIRL diff --git a/keyboards/hidtech/bastyl/info.json b/keyboards/hidtech/bastyl/info.json index 02b8854e36..5d313e7186 100644 --- a/keyboards/hidtech/bastyl/info.json +++ b/keyboards/hidtech/bastyl/info.json @@ -19,6 +19,10 @@ "ws2812": { "pin": "D2" }, + "rgblight": { + "led_count": 38, + "split": true + }, "processor": "atmega32u4", "bootloader": "atmel-dfu", "layouts": { diff --git a/keyboards/hidtech/bastyl/keymaps/nstickney/keymap.c b/keyboards/hidtech/bastyl/keymaps/nstickney/keymap.c index 8dbb311309..e068f81a73 100644 --- a/keyboards/hidtech/bastyl/keymaps/nstickney/keymap.c +++ b/keyboards/hidtech/bastyl/keymaps/nstickney/keymap.c @@ -33,15 +33,15 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { //-------------------------------// KC_LBRC, TD(LOCKS), TD(LAYERS), KC_RBRC), - [SYMB] = LAYOUT(_______, XP(IEX, SS1), X(SS2), X(SS3), XP(CUR, GBP), X(EUR), X(V14), X(V12), X(V34), XP(LSQ, LDQ), XP(RSQ, RDQ), _______, + [SYMB] = LAYOUT(_______, UP(IEX, SS1), UM(SS2), UM(SS3), UP(CUR, GBP), UM(EUR), UM(V14), UM(V12), UM(V34), UP(LSQ, LDQ), UP(RSQ, RDQ), _______, //-------------------------------// - _______, XP(A_D, AXD), XP(A_R, ACR), XP(E_A, ECA), XP(REG, CPL), X(THR), XP(U_D, UCD), XP(U_A, UCA), XP(I_A, ICA), XP(O_A, OCA), XP(O_D, OCD), _______, + _______, UP(A_D, AXD), UP(A_R, ACR), UP(E_A, ECA), UP(REG, CPL), UM(THR), UP(U_D, UCD), UP(U_A, UCA), UP(I_A, ICA), UP(O_A, OCA), UP(O_D, OCD), _______, //-------------------------------// - _______, XP(A_A, ACA), XP(S_S, SEC), XP(ETH, ETC), X(EMD), _______, _______, _______, _______, XP(O_S, OCS), XP(PLC, DEG), XP(ACT, DIS), + _______, UP(A_A, ACA), UP(S_S, SEC), UP(ETH, ETC), UM(EMD), _______, _______, _______, _______, UP(O_S, OCS), UP(PLC, DEG), UP(ACT, DIS), //-------------------------------// - _______, XP(AEL, AEC), _______, XP(CPR, CNT), _______, _______, _______, _______, XP(N_T, NCT), X(MCR), XP(C_C, CCC), _______, + _______, UP(AEL, AEC), _______, UP(CPR, CNT), _______, _______, _______, _______, UP(N_T, NCT), UM(MCR), UP(C_C, CCC), _______, //-------------------------------// - X(IQM), XP(NOT, BKB), _______, _______, X(YEN), XP(MLT, DIV), + UM(IQM), UP(NOT, BKB), _______, _______, UM(YEN), UP(MLT, DIV), //-------------------------------// _______, _______, _______, _______), diff --git a/keyboards/hifumi/config.h b/keyboards/hifumi/config.h index bcf040c6cb..019c322c09 100644 --- a/keyboards/hifumi/config.h +++ b/keyboards/hifumi/config.h @@ -17,8 +17,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #pragma once /* ws2812 RGB LED */ -#define RGBLED_NUM 6 -#define RGBLIGHT_HUE_STEP 5 #define RGBLIGHT_EFFECT_BREATHING #define RGBLIGHT_EFFECT_RAINBOW_MOOD #define RGBLIGHT_EFFECT_RAINBOW_SWIRL diff --git a/keyboards/hifumi/info.json b/keyboards/hifumi/info.json index a4aeccf83a..7e11c0b4a6 100644 --- a/keyboards/hifumi/info.json +++ b/keyboards/hifumi/info.json @@ -13,6 +13,10 @@ "rows": ["D4", "C6"] }, "diode_direction": "COL2ROW", + "rgblight": { + "hue_steps": 5, + "led_count": 6 + }, "ws2812": { "pin": "D3" }, diff --git a/keyboards/hillside/46/0_1/config.h b/keyboards/hillside/46/0_1/config.h index 81736ff175..55395dd407 100644 --- a/keyboards/hillside/46/0_1/config.h +++ b/keyboards/hillside/46/0_1/config.h @@ -8,8 +8,6 @@ #define SPLIT_HAND_MATRIX_GRID B5, F6 #define MATRIX_MASKED -#define RGBLIGHT_SLEEP - /* Haptic hardware */ // The Pimoroni is the likely hardware, for which these settings work #define FB_ERM_LRA 1 diff --git a/keyboards/hillside/46/0_1/info.json b/keyboards/hillside/46/0_1/info.json index 8b5fa112f7..7512debabd 100644 --- a/keyboards/hillside/46/0_1/info.json +++ b/keyboards/hillside/46/0_1/info.json @@ -36,7 +36,8 @@ "split": true, "hue_steps": 8, "saturation_steps": 8, - "brightness_steps": 8 + "brightness_steps": 8, + "sleep": true }, "ws2812": { "pin": "D3" diff --git a/keyboards/hillside/48/0_1/config.h b/keyboards/hillside/48/0_1/config.h index 72f1a842c7..dc642c1193 100644 --- a/keyboards/hillside/48/0_1/config.h +++ b/keyboards/hillside/48/0_1/config.h @@ -3,8 +3,6 @@ #pragma once -#define RGBLIGHT_SLEEP - /* Haptic hardware */ // The Pimoroni is the likely hardware, for which these settings work #define FB_ERM_LRA 1 diff --git a/keyboards/hillside/48/0_1/info.json b/keyboards/hillside/48/0_1/info.json index 19e38259d3..2159d1ca68 100644 --- a/keyboards/hillside/48/0_1/info.json +++ b/keyboards/hillside/48/0_1/info.json @@ -37,7 +37,8 @@ "split": true, "hue_steps": 8, "saturation_steps": 8, - "brightness_steps": 8 + "brightness_steps": 8, + "sleep": true }, "ws2812": { "pin": "D3" diff --git a/keyboards/hillside/52/0_1/config.h b/keyboards/hillside/52/0_1/config.h index 81736ff175..55395dd407 100644 --- a/keyboards/hillside/52/0_1/config.h +++ b/keyboards/hillside/52/0_1/config.h @@ -8,8 +8,6 @@ #define SPLIT_HAND_MATRIX_GRID B5, F6 #define MATRIX_MASKED -#define RGBLIGHT_SLEEP - /* Haptic hardware */ // The Pimoroni is the likely hardware, for which these settings work #define FB_ERM_LRA 1 diff --git a/keyboards/hillside/52/0_1/info.json b/keyboards/hillside/52/0_1/info.json index 8584ee1512..63bbf3b257 100644 --- a/keyboards/hillside/52/0_1/info.json +++ b/keyboards/hillside/52/0_1/info.json @@ -36,7 +36,8 @@ "split": true, "hue_steps": 8, "saturation_steps": 8, - "brightness_steps": 8 + "brightness_steps": 8, + "sleep": true }, "ws2812": { "pin": "D3" diff --git a/keyboards/hineybush/h08_ocelot/config.h b/keyboards/hineybush/h08_ocelot/config.h index e275779f4c..5b18aaa265 100644 --- a/keyboards/hineybush/h08_ocelot/config.h +++ b/keyboards/hineybush/h08_ocelot/config.h @@ -17,11 +17,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #pragma once -# define RGBLED_NUM 7 -# define RGBLIGHT_HUE_STEP 8 -# define RGBLIGHT_SAT_STEP 8 -# define RGBLIGHT_VAL_STEP 8 -# define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */ #define RGBLIGHT_EFFECT_BREATHING #define RGBLIGHT_EFFECT_RAINBOW_MOOD #define RGBLIGHT_EFFECT_RAINBOW_SWIRL diff --git a/keyboards/hineybush/h08_ocelot/info.json b/keyboards/hineybush/h08_ocelot/info.json index addd71a5a8..f802eea134 100644 --- a/keyboards/hineybush/h08_ocelot/info.json +++ b/keyboards/hineybush/h08_ocelot/info.json @@ -17,7 +17,11 @@ "pin": "F1" }, "rgblight": { - "max_brightness": 220 + "saturation_steps": 8, + "brightness_steps": 8, + "led_count": 7, + "max_brightness": 220, + "sleep": true }, "processor": "atmega32u4", "bootloader": "atmel-dfu", diff --git a/keyboards/hineybush/h60/config.h b/keyboards/hineybush/h60/config.h index a4d338b500..696c5aefde 100644 --- a/keyboards/hineybush/h60/config.h +++ b/keyboards/hineybush/h60/config.h @@ -17,11 +17,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #pragma once - #define RGBLED_NUM 16 - #define RGBLIGHT_HUE_STEP 8 - #define RGBLIGHT_SAT_STEP 8 - #define RGBLIGHT_VAL_STEP 8 - #define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */ /*== all animations enable ==*/ #define RGBLIGHT_EFFECT_BREATHING #define RGBLIGHT_EFFECT_RAINBOW_MOOD diff --git a/keyboards/hineybush/h60/info.json b/keyboards/hineybush/h60/info.json index 3069b4a4b3..964ce2b73d 100644 --- a/keyboards/hineybush/h60/info.json +++ b/keyboards/hineybush/h60/info.json @@ -17,6 +17,12 @@ "pin": "B7", "levels": 12 }, + "rgblight": { + "saturation_steps": 8, + "brightness_steps": 8, + "led_count": 16, + "sleep": true + }, "ws2812": { "pin": "B0" }, diff --git a/keyboards/hineybush/h65/config.h b/keyboards/hineybush/h65/config.h index ae0ecc61cf..5b18aaa265 100644 --- a/keyboards/hineybush/h65/config.h +++ b/keyboards/hineybush/h65/config.h @@ -17,11 +17,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #pragma once -# define RGBLED_NUM 17 -# define RGBLIGHT_HUE_STEP 8 -# define RGBLIGHT_SAT_STEP 8 -# define RGBLIGHT_VAL_STEP 8 -# define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */ #define RGBLIGHT_EFFECT_BREATHING #define RGBLIGHT_EFFECT_RAINBOW_MOOD #define RGBLIGHT_EFFECT_RAINBOW_SWIRL diff --git a/keyboards/hineybush/h65/info.json b/keyboards/hineybush/h65/info.json index dba8541b99..c12588c676 100644 --- a/keyboards/hineybush/h65/info.json +++ b/keyboards/hineybush/h65/info.json @@ -20,6 +20,12 @@ "indicators": { "caps_lock": "E6" }, + "rgblight": { + "saturation_steps": 8, + "brightness_steps": 8, + "led_count": 17, + "sleep": true + }, "ws2812": { "pin": "D2" }, diff --git a/keyboards/hineybush/h65_hotswap/config.h b/keyboards/hineybush/h65_hotswap/config.h index ae0ecc61cf..5b18aaa265 100644 --- a/keyboards/hineybush/h65_hotswap/config.h +++ b/keyboards/hineybush/h65_hotswap/config.h @@ -17,11 +17,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #pragma once -# define RGBLED_NUM 17 -# define RGBLIGHT_HUE_STEP 8 -# define RGBLIGHT_SAT_STEP 8 -# define RGBLIGHT_VAL_STEP 8 -# define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */ #define RGBLIGHT_EFFECT_BREATHING #define RGBLIGHT_EFFECT_RAINBOW_MOOD #define RGBLIGHT_EFFECT_RAINBOW_SWIRL diff --git a/keyboards/hineybush/h65_hotswap/info.json b/keyboards/hineybush/h65_hotswap/info.json index a4c09e02da..f512458e3b 100644 --- a/keyboards/hineybush/h65_hotswap/info.json +++ b/keyboards/hineybush/h65_hotswap/info.json @@ -20,6 +20,12 @@ "indicators": { "caps_lock": "E6" }, + "rgblight": { + "saturation_steps": 8, + "brightness_steps": 8, + "led_count": 17, + "sleep": true + }, "ws2812": { "pin": "D2" }, diff --git a/keyboards/hineybush/h660s/config.h b/keyboards/hineybush/h660s/config.h index e4d5a87a00..0d893c95c4 100644 --- a/keyboards/hineybush/h660s/config.h +++ b/keyboards/hineybush/h660s/config.h @@ -17,11 +17,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #pragma once -# define RGBLED_NUM 16 -# define RGBLIGHT_HUE_STEP 8 -# define RGBLIGHT_SAT_STEP 8 -# define RGBLIGHT_VAL_STEP 8 -# define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */ # define RGBLIGHT_EFFECT_BREATHING # define RGBLIGHT_EFFECT_RAINBOW_MOOD # define RGBLIGHT_EFFECT_RAINBOW_SWIRL diff --git a/keyboards/hineybush/h660s/info.json b/keyboards/hineybush/h660s/info.json index be6e28b261..6e7a96929e 100644 --- a/keyboards/hineybush/h660s/info.json +++ b/keyboards/hineybush/h660s/info.json @@ -17,6 +17,12 @@ "pin": "B7", "breathing": true }, + "rgblight": { + "saturation_steps": 8, + "brightness_steps": 8, + "led_count": 16, + "sleep": true + }, "ws2812": { "pin": "B0" }, diff --git a/keyboards/hineybush/h75_singa/config.h b/keyboards/hineybush/h75_singa/config.h index 760e5fdd70..0299e7c44f 100644 --- a/keyboards/hineybush/h75_singa/config.h +++ b/keyboards/hineybush/h75_singa/config.h @@ -17,11 +17,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #pragma once - #define RGBLED_NUM 22 - #define RGBLIGHT_HUE_STEP 8 - #define RGBLIGHT_SAT_STEP 8 - #define RGBLIGHT_VAL_STEP 8 - #define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */ #define RGBLIGHT_EFFECT_BREATHING #define RGBLIGHT_EFFECT_RAINBOW_MOOD #define RGBLIGHT_EFFECT_RAINBOW_SWIRL diff --git a/keyboards/hineybush/h75_singa/info.json b/keyboards/hineybush/h75_singa/info.json index f4a94774f4..bded9c56ad 100644 --- a/keyboards/hineybush/h75_singa/info.json +++ b/keyboards/hineybush/h75_singa/info.json @@ -17,6 +17,12 @@ "pin": "B7", "breathing": true }, + "rgblight": { + "saturation_steps": 8, + "brightness_steps": 8, + "led_count": 22, + "sleep": true + }, "ws2812": { "pin": "B3" }, diff --git a/keyboards/hineybush/h87a/config.h b/keyboards/hineybush/h87a/config.h index 26b995ddd0..05b7afca12 100644 --- a/keyboards/hineybush/h87a/config.h +++ b/keyboards/hineybush/h87a/config.h @@ -32,8 +32,3 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #define RGBLIGHT_EFFECT_RGB_TEST #define RGBLIGHT_EFFECT_ALTERNATING #define RGBLIGHT_EFFECT_TWINKLE -#define RGBLED_NUM 24 -#define RGBLIGHT_HUE_STEP 8 -#define RGBLIGHT_SAT_STEP 8 -#define RGBLIGHT_VAL_STEP 8 -#define RGBLIGHT_SLEEP // RGB will turn off when PC is put to sleep diff --git a/keyboards/hineybush/h87a/info.json b/keyboards/hineybush/h87a/info.json index ee067e1f32..5c9f9dc620 100644 --- a/keyboards/hineybush/h87a/info.json +++ b/keyboards/hineybush/h87a/info.json @@ -20,7 +20,11 @@ "pin": "D3" }, "rgblight": { - "max_brightness": 200 + "saturation_steps": 8, + "brightness_steps": 8, + "led_count": 24, + "max_brightness": 200, + "sleep": true }, "processor": "atmega32u4", "bootloader": "atmel-dfu", diff --git a/keyboards/hineybush/h87a/keymaps/gam3cat/keymap.c b/keyboards/hineybush/h87a/keymaps/gam3cat/keymap.c index 76fd4abae9..6d064455b3 100644 --- a/keyboards/hineybush/h87a/keymaps/gam3cat/keymap.c +++ b/keyboards/hineybush/h87a/keymaps/gam3cat/keymap.c @@ -278,15 +278,16 @@ void led_init_ports(void) { DDRE |= (1<<6); // OUT } -void led_set_user(uint8_t usb_led) { - if (usb_led & (1 << USB_LED_CAPS_LOCK)) { +bool led_update_user(led_t led_state) { + if (led_state.caps_lock) { DDRD |= (1 << 5); PORTD &= ~(1 << 5); } else { DDRD &= ~(1 << 5); PORTD &= ~(1 << 5); } - if (usb_led & (1 << USB_LED_SCROLL_LOCK)) { + if (led_state.scroll_lock) { DDRE |= (1 << 6); PORTE &= ~(1 << 6); } else { DDRE &= ~(1 << 6); PORTE &= ~(1 << 6); } + return false; } diff --git a/keyboards/hineybush/h88/config.h b/keyboards/hineybush/h88/config.h index 0eb28d50c1..a60fa381e9 100644 --- a/keyboards/hineybush/h88/config.h +++ b/keyboards/hineybush/h88/config.h @@ -32,8 +32,3 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #define RGBLIGHT_EFFECT_RGB_TEST #define RGBLIGHT_EFFECT_ALTERNATING #define RGBLIGHT_EFFECT_TWINKLE -#define RGBLED_NUM 24 -#define RGBLIGHT_HUE_STEP 8 -#define RGBLIGHT_SAT_STEP 8 -#define RGBLIGHT_VAL_STEP 8 -#define RGBLIGHT_SLEEP // RGB will turn off when PC is put to sleep diff --git a/keyboards/hineybush/h88/info.json b/keyboards/hineybush/h88/info.json index 7c78582c76..931b56eb93 100644 --- a/keyboards/hineybush/h88/info.json +++ b/keyboards/hineybush/h88/info.json @@ -16,6 +16,12 @@ "backlight": { "pin": "B7" }, + "rgblight": { + "saturation_steps": 8, + "brightness_steps": 8, + "led_count": 24, + "sleep": true + }, "ws2812": { "pin": "D3" }, diff --git a/keyboards/hineybush/hbcp/config.h b/keyboards/hineybush/hbcp/config.h index ee8f76aafd..c17a8fd6ef 100644 --- a/keyboards/hineybush/hbcp/config.h +++ b/keyboards/hineybush/hbcp/config.h @@ -35,14 +35,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #define MATRIX_ROW_PINS { B1, B6, D0, C7, C6, C5 } #define MATRIX_COL_PINS { F0, F1, F2, F3, F4, F5, F6, F7, A0, A1, A2, A3, A4, A5, B5, B4, B3, B2 } -//EITHERWAY is supported through a custom matrix -//#define DIODE_DIRECTION EITHERWAY - - #define RGBLED_NUM 27 - #define RGBLIGHT_HUE_STEP 8 - #define RGBLIGHT_SAT_STEP 8 - #define RGBLIGHT_VAL_STEP 8 - #define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */ #define RGBLIGHT_EFFECT_BREATHING #define RGBLIGHT_EFFECT_RAINBOW_MOOD #define RGBLIGHT_EFFECT_RAINBOW_SWIRL diff --git a/keyboards/hineybush/hbcp/hbcp.c b/keyboards/hineybush/hbcp/hbcp.c index d4601cd2e3..7d0f5ecf73 100644 --- a/keyboards/hineybush/hbcp/hbcp.c +++ b/keyboards/hineybush/hbcp/hbcp.c @@ -45,32 +45,40 @@ void eeconfig_init_kb(void) { // EEPROM is getting reset! #ifdef RGBLIGHT_ENABLE -__attribute__ ((weak)) -void led_set_user(uint8_t usb_led) { - if (IS_LED_ON(usb_led, USB_LED_CAPS_LOCK)) { - sethsv_raw(HSV_CAPS, (LED_TYPE *)&led[0]); - } else { - sethsv(HSV_BLACK, (LED_TYPE *)&led[0]); - } - if (IS_LED_ON(usb_led, USB_LED_NUM_LOCK)) { - sethsv_raw(HSV_NLCK, (LED_TYPE *)&led[1]); - } else { - sethsv(HSV_BLACK, (LED_TYPE *)&led[1]); - } - if (IS_LED_ON(usb_led, USB_LED_SCROLL_LOCK)) { - sethsv_raw(HSV_SCRL, (LED_TYPE *)&led[2]); - } else { - sethsv(HSV_BLACK, (LED_TYPE *)&led[2]); +bool led_update_kb(led_t led_state) { + bool res = led_update_user(led_state); + if (res) { + if (led_state.caps_lock) { + sethsv_raw(HSV_CAPS, (LED_TYPE *)&led[0]); + } else { + sethsv(HSV_BLACK, (LED_TYPE *)&led[0]); + } + if (led_state.num_lock) { + sethsv_raw(HSV_NLCK, (LED_TYPE *)&led[1]); + } else { + sethsv(HSV_BLACK, (LED_TYPE *)&led[1]); + } + if (led_state.scroll_lock) { + sethsv_raw(HSV_SCRL, (LED_TYPE *)&led[2]); + } else { + sethsv(HSV_BLACK, (LED_TYPE *)&led[2]); + } + rgblight_set(); } - rgblight_set(); + return false; } __attribute__ ((weak)) void keyboard_post_init_user(void) { rgblight_set_effect_range(3, RGBLED_NUM-3); - led_set_user(_BV(USB_LED_CAPS_LOCK)|_BV(USB_LED_NUM_LOCK)|_BV(USB_LED_SCROLL_LOCK)); + led_t led_state = { + .caps_lock = true, + .num_lock = true, + .scroll_lock = true + }; + led_update_kb(led_state); wait_ms(300); - led_set_user(0); + led_update_kb((led_t){0}); } __attribute__ ((weak)) diff --git a/keyboards/hineybush/hbcp/info.json b/keyboards/hineybush/hbcp/info.json index 45d52629ae..858551e087 100644 --- a/keyboards/hineybush/hbcp/info.json +++ b/keyboards/hineybush/hbcp/info.json @@ -16,7 +16,11 @@ "pin": "B0" }, "rgblight": { - "max_brightness": 200 + "saturation_steps": 8, + "brightness_steps": 8, + "led_count": 27, + "max_brightness": 200, + "sleep": true }, "processor": "at90usb1286", "bootloader": "atmel-dfu", diff --git a/keyboards/hineybush/hbcp/keymaps/hiney/keymap.c b/keyboards/hineybush/hbcp/keymaps/hiney/keymap.c index 5f1d7700f6..26a67fe7ca 100644 --- a/keyboards/hineybush/hbcp/keymaps/hiney/keymap.c +++ b/keyboards/hineybush/hbcp/keymaps/hiney/keymap.c @@ -77,23 +77,24 @@ void matrix_scan_user(void) { #ifdef RGBLIGHT_ENABLE // The first three LEDs are used as indicators for CAPS_LOCK, NUM_LOCK and SCROLL_LOCK. -void led_set_user(uint8_t usb_led) { - if (IS_LED_ON(usb_led, USB_LED_CAPS_LOCK)) { +bool led_update_user(led_t led_state) { + if (led_state.caps_lock) { sethsv_raw(HSV_SOFT_RED, (LED_TYPE *)&led[0]); } else { sethsv(HSV_BLACK, (LED_TYPE *)&led[0]); } - if (IS_LED_ON(usb_led, USB_LED_NUM_LOCK)) { + if (led_state.num_lock) { sethsv_raw(HSV_WARM_WHITE, (LED_TYPE *)&led[1]); } else { sethsv(HSV_BLACK, (LED_TYPE *)&led[1]); } - if (IS_LED_ON(usb_led, USB_LED_SCROLL_LOCK)) { + if (led_state.scroll_lock) { sethsv_raw(HSV_SOFT_BLUE, (LED_TYPE *)&led[2]); } else { sethsv(HSV_BLACK, (LED_TYPE *)&led[2]); } rgblight_set(); + return false; } #endif diff --git a/keyboards/hineybush/physix/config.h b/keyboards/hineybush/physix/config.h index 848c217499..0299e7c44f 100644 --- a/keyboards/hineybush/physix/config.h +++ b/keyboards/hineybush/physix/config.h @@ -17,11 +17,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #pragma once - #define RGBLED_NUM 26 - #define RGBLIGHT_HUE_STEP 8 - #define RGBLIGHT_SAT_STEP 8 - #define RGBLIGHT_VAL_STEP 8 - #define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */ #define RGBLIGHT_EFFECT_BREATHING #define RGBLIGHT_EFFECT_RAINBOW_MOOD #define RGBLIGHT_EFFECT_RAINBOW_SWIRL diff --git a/keyboards/hineybush/physix/info.json b/keyboards/hineybush/physix/info.json index 191621ff47..c4a0948682 100644 --- a/keyboards/hineybush/physix/info.json +++ b/keyboards/hineybush/physix/info.json @@ -17,6 +17,12 @@ "pin": "B7", "breathing": true }, + "rgblight": { + "saturation_steps": 8, + "brightness_steps": 8, + "led_count": 26, + "sleep": true + }, "ws2812": { "pin": "E6" }, diff --git a/keyboards/hineybush/sm68/config.h b/keyboards/hineybush/sm68/config.h index 98b32f8c37..7dc082706d 100644 --- a/keyboards/hineybush/sm68/config.h +++ b/keyboards/hineybush/sm68/config.h @@ -17,11 +17,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #pragma once - #define RGBLED_NUM 16 - #define RGBLIGHT_HUE_STEP 8 - #define RGBLIGHT_SAT_STEP 8 - #define RGBLIGHT_VAL_STEP 8 - #define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */ #define RGBLIGHT_EFFECT_BREATHING #define RGBLIGHT_EFFECT_RAINBOW_MOOD #define RGBLIGHT_EFFECT_RAINBOW_SWIRL diff --git a/keyboards/hineybush/sm68/info.json b/keyboards/hineybush/sm68/info.json index 6029c4faf9..f9e003f8c9 100644 --- a/keyboards/hineybush/sm68/info.json +++ b/keyboards/hineybush/sm68/info.json @@ -13,6 +13,12 @@ "rows": ["B2", "B1", "B0", "D4", "D1"] }, "diode_direction": "COL2ROW", + "rgblight": { + "saturation_steps": 8, + "brightness_steps": 8, + "led_count": 16, + "sleep": true + }, "ws2812": { "pin": "D0" }, diff --git a/keyboards/hnahkb/stella/config.h b/keyboards/hnahkb/stella/config.h index 3589952afb..9f9d81bea9 100644 --- a/keyboards/hnahkb/stella/config.h +++ b/keyboards/hnahkb/stella/config.h @@ -17,8 +17,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #pragma once -#define RGBLED_NUM 14 - /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ #define LOCKING_SUPPORT_ENABLE /* Locking resynchronize hack */ diff --git a/keyboards/hnahkb/stella/info.json b/keyboards/hnahkb/stella/info.json index 0c002b22c4..98f8f721f3 100644 --- a/keyboards/hnahkb/stella/info.json +++ b/keyboards/hnahkb/stella/info.json @@ -22,6 +22,9 @@ "scroll_lock": "B7", "on_state": 0 }, + "rgblight": { + "led_count": 14, + }, "ws2812": { "pin": "E2" }, diff --git a/keyboards/hnahkb/vn66/config.h b/keyboards/hnahkb/vn66/config.h index 61b2d4967b..33941efff1 100644 --- a/keyboards/hnahkb/vn66/config.h +++ b/keyboards/hnahkb/vn66/config.h @@ -17,11 +17,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #pragma once -# define RGBLED_NUM 20 -# define RGBLIGHT_HUE_STEP 8 -# define RGBLIGHT_SAT_STEP 8 -# define RGBLIGHT_VAL_STEP 8 -# define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */ # define RGBLIGHT_EFFECT_BREATHING # define RGBLIGHT_EFFECT_RAINBOW_MOOD # define RGBLIGHT_EFFECT_RAINBOW_SWIRL diff --git a/keyboards/hnahkb/vn66/info.json b/keyboards/hnahkb/vn66/info.json index aca0104810..83aaff5194 100644 --- a/keyboards/hnahkb/vn66/info.json +++ b/keyboards/hnahkb/vn66/info.json @@ -27,6 +27,12 @@ "caps_lock": "E6", "on_state": 0 }, + "rgblight": { + "saturation_steps": 8, + "brightness_steps": 8, + "led_count": 20, + "sleep": true + }, "ws2812": { "pin": "E2" }, diff --git a/keyboards/horrortroll/chinese_pcb/black_e65/config.h b/keyboards/horrortroll/chinese_pcb/black_e65/config.h index de5824e222..0e58118e05 100644 --- a/keyboards/horrortroll/chinese_pcb/black_e65/config.h +++ b/keyboards/horrortroll/chinese_pcb/black_e65/config.h @@ -17,9 +17,6 @@ #pragma once #ifdef RGBLIGHT_ENABLE - /* RGB Lighting config */ - #define RGBLED_NUM 24 - /* RGB Lighting effect */ #define RGBLIGHT_EFFECT_BREATHING #define RGBLIGHT_EFFECT_RAINBOW_MOOD diff --git a/keyboards/horrortroll/chinese_pcb/black_e65/info.json b/keyboards/horrortroll/chinese_pcb/black_e65/info.json index 2ceb38706f..9de9b1decc 100644 --- a/keyboards/horrortroll/chinese_pcb/black_e65/info.json +++ b/keyboards/horrortroll/chinese_pcb/black_e65/info.json @@ -21,6 +21,9 @@ "indicators": { "caps_lock": "C7" }, + "rgblight": { + "led_count": 24 + }, "ws2812": { "pin": "E2" }, diff --git a/keyboards/horrortroll/handwired_k552/rules.mk b/keyboards/horrortroll/handwired_k552/rules.mk index 2d1a6e93ca..c6854d8a44 100644 --- a/keyboards/horrortroll/handwired_k552/rules.mk +++ b/keyboards/horrortroll/handwired_k552/rules.mk @@ -26,9 +26,6 @@ BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow AUDIO_ENABLE = no # Audio output -# Enter lower-power sleep mode when on the ChibiOS idle thread -OPT_DEFS += -DCORTEX_ENABLE_WFI_IDLE=TRUE - # RGB Matrix enabled RGB_MATRIX_ENABLE = yes diff --git a/keyboards/horrortroll/lemon40/config.h b/keyboards/horrortroll/lemon40/config.h index 9037487173..6867922fd3 100644 --- a/keyboards/horrortroll/lemon40/config.h +++ b/keyboards/horrortroll/lemon40/config.h @@ -18,10 +18,6 @@ /* RGB light config */ #ifdef RGBLIGHT_ENABLE - - /* RGB light pin */ - #define RGBLED_NUM 15 - /* RGB light effect */ #define RGBLIGHT_EFFECT_BREATHING #define RGBLIGHT_EFFECT_RAINBOW_MOOD diff --git a/keyboards/horrortroll/lemon40/info.json b/keyboards/horrortroll/lemon40/info.json index f4b4c383c9..29530b3757 100644 --- a/keyboards/horrortroll/lemon40/info.json +++ b/keyboards/horrortroll/lemon40/info.json @@ -9,6 +9,9 @@ "device_version": "0.0.1", "force_nkro": true }, + "rgblight": { + "led_count": 15 + }, "ws2812": { "pin": "F4" }, diff --git a/keyboards/hotdox/config.h b/keyboards/hotdox/config.h index 4e801399da..60d9fe6217 100644 --- a/keyboards/hotdox/config.h +++ b/keyboards/hotdox/config.h @@ -11,10 +11,6 @@ #define MOUSEKEY_MAX_SPEED 7 #define MOUSEKEY_WHEEL_DELAY 0 -#define TAPPING_TOGGLE 1 - -#define TAPPING_TERM 200 - /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ #define LOCKING_SUPPORT_ENABLE /* Locking resynchronize hack */ diff --git a/keyboards/hotdox/info.json b/keyboards/hotdox/info.json index 51c0465899..8184588e5d 100644 --- a/keyboards/hotdox/info.json +++ b/keyboards/hotdox/info.json @@ -12,6 +12,9 @@ }, "processor": "atmega32u4", "bootloader": "atmel-dfu", + "tapping": { + "toggle": 1 + }, "community_layouts": ["ergodox"], "layouts": { "LAYOUT_ergodox": { diff --git a/keyboards/hp69/config.h b/keyboards/hp69/config.h index cb64849d06..409b36d2b1 100644 --- a/keyboards/hp69/config.h +++ b/keyboards/hp69/config.h @@ -17,7 +17,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #pragma once -#define RGBLED_NUM 20 #define RGBLIGHT_EFFECT_BREATHING #define RGBLIGHT_EFFECT_RAINBOW_MOOD #define RGBLIGHT_EFFECT_RAINBOW_SWIRL @@ -28,7 +27,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #define RGBLIGHT_EFFECT_RGB_TEST #define RGBLIGHT_EFFECT_ALTERNATING #define RGBLIGHT_EFFECT_TWINKLE -#define RGBLIGHT_SLEEP #define AUDIO_PIN A5 #define AUDIO_PIN_ALT A4 diff --git a/keyboards/hp69/info.json b/keyboards/hp69/info.json index 8484902252..fcb7afa602 100644 --- a/keyboards/hp69/info.json +++ b/keyboards/hp69/info.json @@ -17,6 +17,10 @@ "caps_lock": "A6", "scroll_lock": "A7" }, + "rgblight": { + "led_count": 20, + "sleep": true + }, "ws2812": { "pin": "A3" }, diff --git a/keyboards/hub16/config.h b/keyboards/hub16/config.h index a628c11ddc..1130700383 100755 --- a/keyboards/hub16/config.h +++ b/keyboards/hub16/config.h @@ -26,11 +26,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. /* COL2ROW, ROW2COL*/ #define DIODE_DIRECTION COL2ROW -#define RGBLED_NUM 11 -#define RGBLIGHT_HUE_STEP 8 -#define RGBLIGHT_SAT_STEP 8 -#define RGBLIGHT_VAL_STEP 8 -#define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */ #define RGBLIGHT_EFFECT_BREATHING #define RGBLIGHT_EFFECT_RAINBOW_MOOD #define RGBLIGHT_EFFECT_RAINBOW_SWIRL @@ -42,9 +37,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #define RGBLIGHT_EFFECT_ALTERNATING #define RGBLIGHT_EFFECT_TWINKLE -/* Tap Dance timing */ -#define TAPPING_TERM 200 - /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ #define LOCKING_SUPPORT_ENABLE /* Locking resynchronize hack */ diff --git a/keyboards/hub16/info.json b/keyboards/hub16/info.json index 4d8161d28d..4e3cc96d28 100644 --- a/keyboards/hub16/info.json +++ b/keyboards/hub16/info.json @@ -14,6 +14,12 @@ {"pin_a": "B5", "pin_b": "B4"} ] }, + "rgblight": { + "saturation_steps": 8, + "brightness_steps": 8, + "led_count": 11, + "sleep": true + }, "ws2812": { "pin": "D1" }, diff --git a/keyboards/hub20/config.h b/keyboards/hub20/config.h index 5fc99ecbf5..a72b1389ad 100644 --- a/keyboards/hub20/config.h +++ b/keyboards/hub20/config.h @@ -18,10 +18,7 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #pragma once -#define RGBLED_NUM 27 - #define RGB_MATRIX_LED_COUNT 27 - #define RGBLED_NUM 27 #define RGB_MATRIX_FRAMEBUFFER_EFFECTS #define RGB_MATRIX_KEYPRESSES @@ -75,12 +72,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. // #define ENABLE_RGB_MATRIX_SOLID_SPLASH // #define ENABLE_RGB_MATRIX_SOLID_MULTISPLASH -/* Tap delay for tap vs hold */ -#define TAPPING_TERM 200 - -/* Slow down key press speed to ensure computer picks it up */ -#define TAP_CODE_DELAY 10 - /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ #define LOCKING_SUPPORT_ENABLE /* Locking resynchronize hack */ diff --git a/keyboards/hub20/info.json b/keyboards/hub20/info.json index 994b9405d9..3b9cec99c2 100644 --- a/keyboards/hub20/info.json +++ b/keyboards/hub20/info.json @@ -22,6 +22,12 @@ {"pin_a": "A8", "pin_b": "A9"} ] }, + "qmk": { + "tap_keycode_delay": 10 + }, + "rgblight": { + "led_count": 27 + }, "ws2812": { "pin": "B15" }, diff --git a/keyboards/hub20/rules.mk b/keyboards/hub20/rules.mk index 081ea9225a..f559246b9e 100644 --- a/keyboards/hub20/rules.mk +++ b/keyboards/hub20/rules.mk @@ -13,5 +13,3 @@ AUDIO_ENABLE = no # Audio output RGB_MATRIX_ENABLE = yes ENCODER_ENABLE = yes -# Enter lower-power sleep mode when on the ChibiOS idle thread -OPT_DEFS += -DCORTEX_ENABLE_WFI_IDLE=TRUE diff --git a/keyboards/hubble/config.h b/keyboards/hubble/config.h index ad5e772c74..59787e7920 100644 --- a/keyboards/hubble/config.h +++ b/keyboards/hubble/config.h @@ -5,8 +5,6 @@ /* rgb */ -#define RGBLED_NUM 7 -#define RGBLIGHT_SLEEP #define RGBLIGHT_EFFECT_BREATHING #define RGBLIGHT_EFFECT_RAINBOW_MOOD #define RGBLIGHT_EFFECT_RAINBOW_SWIRL diff --git a/keyboards/hubble/info.json b/keyboards/hubble/info.json index b89647e524..953323fe00 100644 --- a/keyboards/hubble/info.json +++ b/keyboards/hubble/info.json @@ -14,6 +14,10 @@ "rgblight": true, "velocikey": true }, + "rgblight": { + "led_count": 7, + "sleep": true + }, "ws2812": { "pin": "D2" }, diff --git a/keyboards/ibm/model_m/mschwingen/config.h b/keyboards/ibm/model_m/mschwingen/config.h index b1dc81b8c7..b34d29649a 100644 --- a/keyboards/ibm/model_m/mschwingen/config.h +++ b/keyboards/ibm/model_m/mschwingen/config.h @@ -69,9 +69,6 @@ # error one of MODELM_LEDS_FFC, MODELM_LEDS_WIRED or MODELM_LEDS_WS2812 must be set! #endif -// 3* WS2812 LEDs instead of singlecolor GPIO LEDs -#define RGBLED_NUM 3 - // disabled, needs PCB patch. //#define AUDIO_PIN C6 //#define NO_MUSIC_MODE diff --git a/keyboards/ibm/model_m/mschwingen/info.json b/keyboards/ibm/model_m/mschwingen/info.json index 1ba525de6c..ce740e4a54 100644 --- a/keyboards/ibm/model_m/mschwingen/info.json +++ b/keyboards/ibm/model_m/mschwingen/info.json @@ -8,6 +8,9 @@ "pid": "0x558E", "device_version": "0.0.1" }, + "rgblight": { + "led_count": 3 + }, "ws2812": { "pin": "B6" }, diff --git a/keyboards/ibm/model_m/teensypp/keymaps/iw0rm3r/keymap.c b/keyboards/ibm/model_m/teensypp/keymaps/iw0rm3r/keymap.c index f4a1acb0ce..4ec0a0cbc0 100644 --- a/keyboards/ibm/model_m/teensypp/keymaps/iw0rm3r/keymap.c +++ b/keyboards/ibm/model_m/teensypp/keymaps/iw0rm3r/keymap.c @@ -25,19 +25,3 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { KC_LCTL, KC_LALT, KC_SPC, KC_RALT, KC_RCTL, KC_LEFT, KC_DOWN, KC_RGHT, KC_APP, KC_PDOT ), }; - -bool process_record_user(uint16_t keycode, keyrecord_t *record) { - return true; -} - -void matrix_init_user(void) { - -} - -void matrix_scan_user(void) { - -} - -void led_set_user(uint8_t usb_led) { - -} diff --git a/keyboards/ibm/model_m_122/ibm122m/keymaps/lukaus/keymap.c b/keyboards/ibm/model_m_122/ibm122m/keymaps/lukaus/keymap.c index 8b99267650..4e33b0af29 100644 --- a/keyboards/ibm/model_m_122/ibm122m/keymaps/lukaus/keymap.c +++ b/keyboards/ibm/model_m_122/ibm122m/keymaps/lukaus/keymap.c @@ -552,7 +552,3 @@ bool process_record_user(uint16_t keycode, keyrecord_t *record) { return true; } - -void led_set_user(uint8_t usb_led) { - -} diff --git a/keyboards/ibnuda/gurindam/config.h b/keyboards/ibnuda/gurindam/config.h index dc525a111d..5132abe095 100644 --- a/keyboards/ibnuda/gurindam/config.h +++ b/keyboards/ibnuda/gurindam/config.h @@ -17,7 +17,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #pragma once -#define RGBLED_NUM 10 #define RGBLIGHT_EFFECT_BREATHING #define RGBLIGHT_EFFECT_RAINBOW_MOOD #define RGBLIGHT_EFFECT_RAINBOW_SWIRL diff --git a/keyboards/ibnuda/gurindam/info.json b/keyboards/ibnuda/gurindam/info.json index 2b18d0417e..e2d965d3e8 100644 --- a/keyboards/ibnuda/gurindam/info.json +++ b/keyboards/ibnuda/gurindam/info.json @@ -8,6 +8,9 @@ "pid": "0x6974", "device_version": "0.0.1" }, + "rgblight": { + "led_count": 10 + }, "ws2812": { "pin": "D3" }, diff --git a/keyboards/idobao/id42/config.h b/keyboards/idobao/id42/config.h index 501fd1f996..bac9dbf1bd 100755 --- a/keyboards/idobao/id42/config.h +++ b/keyboards/idobao/id42/config.h @@ -3,10 +3,6 @@ #pragma once -/* Change the USB polling rate [default = 1000Hz (1ms)] and - * use larger value of keys per scan for elite games */ -#define USB_POLLING_INTERVAL_MS 2 // 500Hz - /* LED Matrix & Animations */ #ifdef RGB_MATRIX_ENABLE @@ -15,10 +11,6 @@ #define RGB_DISABLE_WHEN_USB_SUSPENDED // turn off effects when suspended #define RGB_MATRIX_MAXIMUM_BRIGHTNESS 180 // limits maximum brightness of LEDs to x out of 255. If not defined maximum brightness is set to 255 - #define RGBLIGHT_HUE_STEP 8 - #define RGBLIGHT_SAT_STEP 8 - #define RGBLIGHT_VAL_STEP 8 - #define RGB_MATRIX_KEYPRESSES // enable key press effects #define ENABLE_RGB_MATRIX_SOLID_COLOR // Static single color diff --git a/keyboards/idobao/id42/info.json b/keyboards/idobao/id42/info.json index cc896ff236..03a6f1724b 100644 --- a/keyboards/idobao/id42/info.json +++ b/keyboards/idobao/id42/info.json @@ -30,7 +30,8 @@ "vid": "0x6964", "pid": "0x0042", "device_version": "1.0.0", - "force_nkro": true + "force_nkro": true, + "polling_interval": 2 }, "layouts": { "LAYOUT": { diff --git a/keyboards/idobao/id75/v1/config.h b/keyboards/idobao/id75/v1/config.h index 2174e39bd2..1d24a79621 100644 --- a/keyboards/idobao/id75/v1/config.h +++ b/keyboards/idobao/id75/v1/config.h @@ -28,11 +28,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #define RGBLIGHT_EFFECT_STATIC_GRADIENT #define RGBLIGHT_EFFECT_TWINKLE - #define RGBLED_NUM 16 - #define RGBLIGHT_HUE_STEP 8 - #define RGBLIGHT_SAT_STEP 8 - #define RGBLIGHT_VAL_STEP 8 - /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ #define LOCKING_SUPPORT_ENABLE /* Locking resynchronize hack */ diff --git a/keyboards/idobao/id75/v1/info.json b/keyboards/idobao/id75/v1/info.json index 1407d02c80..2300b56b00 100644 --- a/keyboards/idobao/id75/v1/info.json +++ b/keyboards/idobao/id75/v1/info.json @@ -12,6 +12,11 @@ "cols": ["F6", "F5", "F4", "F1", "E6", "D5", "D3", "D2", "D1", "D0", "D4", "D6", "D7", "B4", "B5"], "rows": ["B0", "B3", "C7", "B6", "C6"] }, + "rgblight": { + "saturation_steps": 8, + "brightness_steps": 8, + "led_count": 16 + }, "ws2812": { "pin": "F0" }, diff --git a/keyboards/idobao/id75/keymaps/greenshadowmaker/keyboard-layout-editor-gsm-idobo.json b/keyboards/idobao/id75/v1/keymaps/greenshadowmaker/keyboard-layout-editor-gsm-idobo.json index 19c0780463..19c0780463 100644 --- a/keyboards/idobao/id75/keymaps/greenshadowmaker/keyboard-layout-editor-gsm-idobo.json +++ b/keyboards/idobao/id75/v1/keymaps/greenshadowmaker/keyboard-layout-editor-gsm-idobo.json diff --git a/keyboards/idobao/id75/keymaps/greenshadowmaker/keymap.c b/keyboards/idobao/id75/v1/keymaps/greenshadowmaker/keymap.c index a79b03b80f..84830e47c6 100644 --- a/keyboards/idobao/id75/keymaps/greenshadowmaker/keymap.c +++ b/keyboards/idobao/id75/v1/keymaps/greenshadowmaker/keymap.c @@ -126,15 +126,3 @@ bool process_record_user(uint16_t keycode, keyrecord_t *record) { } return true; } - -void matrix_init_user(void) { - -} - -void matrix_scan_user(void) { - -} - -void led_set_user(uint8_t usb_led) { - -} diff --git a/keyboards/idobao/id75/keymaps/greenshadowmaker/readme.md b/keyboards/idobao/id75/v1/keymaps/greenshadowmaker/readme.md index 7b6f654c71..7b6f654c71 100644 --- a/keyboards/idobao/id75/keymaps/greenshadowmaker/readme.md +++ b/keyboards/idobao/id75/v1/keymaps/greenshadowmaker/readme.md diff --git a/keyboards/idobao/id75/keymaps/greenshadowmaker/rules.mk b/keyboards/idobao/id75/v1/keymaps/greenshadowmaker/rules.mk index f6587a835e..f6587a835e 100644 --- a/keyboards/idobao/id75/keymaps/greenshadowmaker/rules.mk +++ b/keyboards/idobao/id75/v1/keymaps/greenshadowmaker/rules.mk diff --git a/keyboards/idobao/id80/v2/config.h b/keyboards/idobao/id80/v2/config.h index e45c0081ae..59cdc7a0c9 100644 --- a/keyboards/idobao/id80/v2/config.h +++ b/keyboards/idobao/id80/v2/config.h @@ -17,12 +17,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #pragma once - #define RGBLED_NUM 20 /* 16 underglow LEDs, 4 top LEDs */ - #define RGBLIGHT_HUE_STEP 8 - #define RGBLIGHT_SAT_STEP 8 - #define RGBLIGHT_VAL_STEP 8 - #define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */ - #define RGBLIGHT_EFFECT_ALTERNATING #define RGBLIGHT_EFFECT_BREATHING #define RGBLIGHT_EFFECT_CHRISTMAS diff --git a/keyboards/idobao/id80/v2/info.json b/keyboards/idobao/id80/v2/info.json index 26a5a7db81..411a066c97 100644 --- a/keyboards/idobao/id80/v2/info.json +++ b/keyboards/idobao/id80/v2/info.json @@ -19,7 +19,11 @@ "pin": "E2" }, "rgblight": { - "max_brightness": 180 + "saturation_steps": 8, + "brightness_steps": 8, + "led_count": 20, + "max_brightness": 180, + "sleep": true }, "indicators": { "caps_lock": "C7", diff --git a/keyboards/idobao/id87/v1/config.h b/keyboards/idobao/id87/v1/config.h index 9b7459de6c..e10f3a7a20 100644 --- a/keyboards/idobao/id87/v1/config.h +++ b/keyboards/idobao/id87/v1/config.h @@ -24,8 +24,3 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #define RGBLIGHT_EFFECT_SNAKE #define RGBLIGHT_EFFECT_STATIC_GRADIENT #define RGBLIGHT_EFFECT_TWINKLE - - #define RGBLED_NUM 22 /* 16 Bottom 6 top*/ - #define RGBLIGHT_HUE_STEP 8 - #define RGBLIGHT_SAT_STEP 8 - #define RGBLIGHT_VAL_STEP 8 diff --git a/keyboards/idobao/id87/v1/info.json b/keyboards/idobao/id87/v1/info.json index 1deaf6b270..b671d1908a 100644 --- a/keyboards/idobao/id87/v1/info.json +++ b/keyboards/idobao/id87/v1/info.json @@ -19,6 +19,11 @@ "indicators": { "caps_lock": "C7" }, + "rgblight": { + "saturation_steps": 8, + "brightness_steps": 8, + "led_count": 22 + }, "ws2812": { "pin": "E2" }, diff --git a/keyboards/idobao/id96/config.h b/keyboards/idobao/id96/config.h index a857f49125..7455adcc9f 100644 --- a/keyboards/idobao/id96/config.h +++ b/keyboards/idobao/id96/config.h @@ -34,7 +34,3 @@ #define RGBLIGHT_EFFECT_RGB_TEST #define RGBLIGHT_EFFECT_ALTERNATING #define RGBLIGHT_EFFECT_TWINKLE - #define RGBLED_NUM 18 - #define RGBLIGHT_HUE_STEP 8 - #define RGBLIGHT_SAT_STEP 8 - #define RGBLIGHT_VAL_STEP 8 diff --git a/keyboards/idobao/id96/info.json b/keyboards/idobao/id96/info.json index f49337fc14..3cf802bc92 100644 --- a/keyboards/idobao/id96/info.json +++ b/keyboards/idobao/id96/info.json @@ -18,6 +18,11 @@ "levels": 7, "breathing": true }, + "rgblight": { + "saturation_steps": 8, + "brightness_steps": 8, + "led_count": 18 + }, "ws2812": { "pin": "E2" }, diff --git a/keyboards/idobao/montex/v1/config.h b/keyboards/idobao/montex/v1/config.h index 87ed689f66..4f864b8483 100644 --- a/keyboards/idobao/montex/v1/config.h +++ b/keyboards/idobao/montex/v1/config.h @@ -32,8 +32,3 @@ #define RGBLIGHT_EFFECT_SNAKE #define RGBLIGHT_EFFECT_STATIC_GRADIENT #define RGBLIGHT_EFFECT_TWINKLE - - #define RGBLED_NUM 4 - #define RGBLIGHT_HUE_STEP 8 - #define RGBLIGHT_SAT_STEP 8 - #define RGBLIGHT_VAL_STEP 8 diff --git a/keyboards/idobao/montex/v1/info.json b/keyboards/idobao/montex/v1/info.json index 666ffbdf89..d86dd7f5b0 100644 --- a/keyboards/idobao/montex/v1/info.json +++ b/keyboards/idobao/montex/v1/info.json @@ -16,6 +16,11 @@ "backlight": { "pin": "B6" }, + "rgblight": { + "saturation_steps": 8, + "brightness_steps": 8, + "led_count": 4 + }, "ws2812": { "pin": "B1" }, diff --git a/keyboards/inett_studio/sqx/hotswap/config.h b/keyboards/inett_studio/sqx/hotswap/config.h index 1eff584a83..3450509468 100644 --- a/keyboards/inett_studio/sqx/hotswap/config.h +++ b/keyboards/inett_studio/sqx/hotswap/config.h @@ -31,7 +31,6 @@ //rgb light setting -#define RGBLED_NUM 18 #define RGBLIGHT_EFFECT_BREATHING #define RGBLIGHT_EFFECT_RAINBOW_MOOD #define RGBLIGHT_EFFECT_RAINBOW_SWIRL @@ -42,9 +41,6 @@ #define RGBLIGHT_EFFECT_RGB_TEST #define RGBLIGHT_EFFECT_ALTERNATING #define RGBLIGHT_EFFECT_TWINKLE -#define RGBLIGHT_HUE_STEP 8 -#define RGBLIGHT_SAT_STEP 8 -#define RGBLIGHT_VAL_STEP 8 //rgb matrix setting #define DRIVER_1_LED_TOTAL 33 diff --git a/keyboards/inett_studio/sqx/hotswap/info.json b/keyboards/inett_studio/sqx/hotswap/info.json index 8d4621a608..271af5e5b0 100644 --- a/keyboards/inett_studio/sqx/hotswap/info.json +++ b/keyboards/inett_studio/sqx/hotswap/info.json @@ -15,6 +15,9 @@ "driver": "IS31FL3731" }, "rgblight": { + "saturation_steps": 8, + "brightness_steps": 8, + "led_count": 18, "max_brightness": 128 }, "matrix_pins": { diff --git a/keyboards/inett_studio/sqx/universal/config.h b/keyboards/inett_studio/sqx/universal/config.h index 92c9bedfc9..808ba8fcbe 100644 --- a/keyboards/inett_studio/sqx/universal/config.h +++ b/keyboards/inett_studio/sqx/universal/config.h @@ -31,7 +31,6 @@ //rgb light setting -#define RGBLED_NUM 18 #define RGBLIGHT_EFFECT_BREATHING #define RGBLIGHT_EFFECT_RAINBOW_MOOD #define RGBLIGHT_EFFECT_RAINBOW_SWIRL @@ -42,9 +41,6 @@ #define RGBLIGHT_EFFECT_RGB_TEST #define RGBLIGHT_EFFECT_ALTERNATING #define RGBLIGHT_EFFECT_TWINKLE -#define RGBLIGHT_HUE_STEP 8 -#define RGBLIGHT_SAT_STEP 8 -#define RGBLIGHT_VAL_STEP 8 //rgb matrix setting #define DRIVER_1_LED_TOTAL 36 diff --git a/keyboards/inett_studio/sqx/universal/info.json b/keyboards/inett_studio/sqx/universal/info.json index 9839aa10de..8f574769f0 100644 --- a/keyboards/inett_studio/sqx/universal/info.json +++ b/keyboards/inett_studio/sqx/universal/info.json @@ -15,6 +15,9 @@ "driver": "IS31FL3731" }, "rgblight": { + "saturation_steps": 8, + "brightness_steps": 8, + "led_count": 18, "max_brightness": 128 }, "matrix_pins": { diff --git a/keyboards/hfdkb/keyboard_sw/k83/config.h b/keyboards/inland/kb83/config.h index a4660c93be..d1e7d11acc 100644 --- a/keyboards/hfdkb/keyboard_sw/k83/config.h +++ b/keyboards/inland/kb83/config.h @@ -19,9 +19,6 @@ #define RGB_TRIGGER_ON_KEYDOWN -/* encoder resolution */ -#define TAP_CODE_DELAY 15 - /* DIP switch */ #define DIP_SWITCH_PINS \ { A9 } diff --git a/keyboards/hfdkb/keyboard_sw/k83/halconf.h b/keyboards/inland/kb83/halconf.h index 2f64e65393..2f64e65393 100644 --- a/keyboards/hfdkb/keyboard_sw/k83/halconf.h +++ b/keyboards/inland/kb83/halconf.h diff --git a/keyboards/hfdkb/keyboard_sw/k83/info.json b/keyboards/inland/kb83/info.json index b31fd86f1f..ecd274cef7 100644 --- a/keyboards/hfdkb/keyboard_sw/k83/info.json +++ b/keyboards/inland/kb83/info.json @@ -23,6 +23,9 @@ {"pin_a": "B14", "pin_b": "B13", "resolution": 4} ] }, + "qmk": { + "tap_keycode_delay": 15 + }, "layouts": { "LAYOUT": { "layout": [ diff --git a/keyboards/hfdkb/keyboard_sw/k83/k83.c b/keyboards/inland/kb83/kb83.c index 86b52cfe92..86b52cfe92 100644 --- a/keyboards/hfdkb/keyboard_sw/k83/k83.c +++ b/keyboards/inland/kb83/kb83.c diff --git a/keyboards/hfdkb/keyboard_sw/k83/keymaps/default/keymap.c b/keyboards/inland/kb83/keymaps/default/keymap.c index 712383d48d..712383d48d 100644 --- a/keyboards/hfdkb/keyboard_sw/k83/keymaps/default/keymap.c +++ b/keyboards/inland/kb83/keymaps/default/keymap.c diff --git a/keyboards/hfdkb/keyboard_sw/k83/keymaps/via/keymap.c b/keyboards/inland/kb83/keymaps/via/keymap.c index 712383d48d..712383d48d 100644 --- a/keyboards/hfdkb/keyboard_sw/k83/keymaps/via/keymap.c +++ b/keyboards/inland/kb83/keymaps/via/keymap.c diff --git a/keyboards/hfdkb/keyboard_sw/k83/keymaps/via/rules.mk b/keyboards/inland/kb83/keymaps/via/rules.mk index 4253f570f0..4253f570f0 100644 --- a/keyboards/hfdkb/keyboard_sw/k83/keymaps/via/rules.mk +++ b/keyboards/inland/kb83/keymaps/via/rules.mk diff --git a/keyboards/hfdkb/keyboard_sw/k83/mcuconf.h b/keyboards/inland/kb83/mcuconf.h index 0d16f4f04e..0d16f4f04e 100644 --- a/keyboards/hfdkb/keyboard_sw/k83/mcuconf.h +++ b/keyboards/inland/kb83/mcuconf.h diff --git a/keyboards/hfdkb/keyboard_sw/k83/readme.md b/keyboards/inland/kb83/readme.md index 871e9b8936..e6f1d45990 100644 --- a/keyboards/hfdkb/keyboard_sw/k83/readme.md +++ b/keyboards/inland/kb83/readme.md @@ -1,17 +1,18 @@ -# k83 +# kb83 A customizable 75% encoder keyboard. * Keyboard Maintainer: [jonylee@hfd](https://github.com/jonylee1986) -* Hardware Supported: k83 +* Hardware Supported: kb83 +* Hardware Availability:[inland](https://www.microcenter.com) Make example for this keyboard (after setting up your build environment): - make hfdkb/keyboard_sw/k83:default + make inland/kb83:default Flashing example for this keyboard: - make hfdkb/keyboard_sw/k83:default:flash + make inland/kb83:default:flash **Reset Key**: Hold down the key located at *K01*, which programmed as *Esc* while plugging in the keyboard. diff --git a/keyboards/hfdkb/keyboard_sw/k83/rgb_matrix_kb.inc b/keyboards/inland/kb83/rgb_matrix_kb.inc index 56e2bd31cb..56e2bd31cb 100644 --- a/keyboards/hfdkb/keyboard_sw/k83/rgb_matrix_kb.inc +++ b/keyboards/inland/kb83/rgb_matrix_kb.inc diff --git a/keyboards/hfdkb/keyboard_sw/k83/rules.mk b/keyboards/inland/kb83/rules.mk index 756d0c0719..756d0c0719 100644 --- a/keyboards/hfdkb/keyboard_sw/k83/rules.mk +++ b/keyboards/inland/kb83/rules.mk diff --git a/keyboards/input_club/ergodox_infinity/config.h b/keyboards/input_club/ergodox_infinity/config.h index 6d642e5d45..7db6119a1c 100644 --- a/keyboards/input_club/ergodox_infinity/config.h +++ b/keyboards/input_club/ergodox_infinity/config.h @@ -23,10 +23,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #define MOUSEKEY_MAX_SPEED 7 #define MOUSEKEY_WHEEL_DELAY 0 -#define TAPPING_TOGGLE 1 - -#define TAPPING_TERM 200 - /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ #define LOCKING_SUPPORT_ENABLE /* Locking resynchronize hack */ diff --git a/keyboards/input_club/ergodox_infinity/info.json b/keyboards/input_club/ergodox_infinity/info.json index ca6aa92b5d..e3e0399bed 100644 --- a/keyboards/input_club/ergodox_infinity/info.json +++ b/keyboards/input_club/ergodox_infinity/info.json @@ -17,6 +17,9 @@ "processor": "MK20DX256", "bootloader": "kiibohd", "board": "IC_TEENSY_3_1", + "tapping": { + "toggle": 1 + }, "community_layouts": ["ergodox"], "layouts": { "LAYOUT_ergodox": { diff --git a/keyboards/input_club/infinity60/led.c b/keyboards/input_club/infinity60/led.c index 8effcea81a..33871bcc49 100644 --- a/keyboards/input_club/infinity60/led.c +++ b/keyboards/input_club/infinity60/led.c @@ -26,29 +26,33 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. * both regular threads and ISRs, unlocked (during resume-from-sleep). * In particular, I2C functions (interrupt-driven) should NOT be called from here. */ -void led_set(uint8_t usb_led) { - msg_t msg; - - if (usb_led & (1<<USB_LED_NUM_LOCK)) { - chSysUnconditionalLock(); - msg=(1 << 8) | TOGGLE_NUM_LOCK; - chMBPostI(&led_mailbox, msg); - chSysUnconditionalUnlock(); - } else { - chSysUnconditionalLock(); - msg=(0 << 8) | TOGGLE_NUM_LOCK; - chMBPostI(&led_mailbox, msg); - chSysUnconditionalUnlock(); - } - if (usb_led & (1<<USB_LED_CAPS_LOCK)) { - chSysUnconditionalLock(); - msg=(1 << 8) | TOGGLE_CAPS_LOCK; - chMBPostI(&led_mailbox, msg); - chSysUnconditionalUnlock(); - } else { - chSysUnconditionalLock(); - msg=(0 << 8) | TOGGLE_CAPS_LOCK; - chMBPostI(&led_mailbox, msg); - chSysUnconditionalUnlock(); +bool led_update_kb(led_t led_state) { + bool res = led_update_user(led_state); + if (res) { + msg_t msg; + + if (led_state.num_lock) { + chSysUnconditionalLock(); + msg=(1 << 8) | TOGGLE_NUM_LOCK; + chMBPostI(&led_mailbox, msg); + chSysUnconditionalUnlock(); + } else { + chSysUnconditionalLock(); + msg=(0 << 8) | TOGGLE_NUM_LOCK; + chMBPostI(&led_mailbox, msg); + chSysUnconditionalUnlock(); + } + if (led_state.caps_lock) { + chSysUnconditionalLock(); + msg=(1 << 8) | TOGGLE_CAPS_LOCK; + chMBPostI(&led_mailbox, msg); + chSysUnconditionalUnlock(); + } else { + chSysUnconditionalLock(); + msg=(0 << 8) | TOGGLE_CAPS_LOCK; + chMBPostI(&led_mailbox, msg); + chSysUnconditionalUnlock(); + } } + return false; } diff --git a/keyboards/input_club/infinity60/led_controller.c b/keyboards/input_club/infinity60/led_controller.c index cf3edf20dd..5ea0ae804c 100644 --- a/keyboards/input_club/infinity60/led_controller.c +++ b/keyboards/input_club/infinity60/led_controller.c @@ -187,8 +187,9 @@ static THD_FUNCTION(LEDthread, arg) { // initialize persistent variables pwm_step_status = 4; //full brightness page_status = 0; //start frame 0 (all off/on) - numlock_status = (host_keyboard_leds() & (1<<USB_LED_NUM_LOCK)) ? 1 : 0; - capslock_status = (host_keyboard_leds() & (1<<USB_LED_CAPS_LOCK)) ? 1 : 0; + led_t led_state = host_keyboard_led_state(); + numlock_status = led_state.num_lock ? 1 : 0; + capslock_status = led_state.caps_lock ? 1 : 0; while(true) { // wait for a message (asynchronous) diff --git a/keyboards/input_club/infinity60/rules.mk b/keyboards/input_club/infinity60/rules.mk index e47069dac9..5f885e1194 100644 --- a/keyboards/input_club/infinity60/rules.mk +++ b/keyboards/input_club/infinity60/rules.mk @@ -13,5 +13,3 @@ AUDIO_ENABLE = no # Audio output DEFAULT_FOLDER = input_club/infinity60/led -# Enter lower-power sleep mode when on the ChibiOS idle thread -OPT_DEFS += -DCORTEX_ENABLE_WFI_IDLE=TRUE diff --git a/keyboards/input_club/k_type/rules.mk b/keyboards/input_club/k_type/rules.mk index 450eb9a023..d7776bb755 100644 --- a/keyboards/input_club/k_type/rules.mk +++ b/keyboards/input_club/k_type/rules.mk @@ -18,5 +18,3 @@ RGB_MATRIX_ENABLE = no SRC += k_type-rgbdriver.c QUANTUM_LIB_SRC += i2c_master.c is31fl3733-dual.c -# Enter lower-power sleep mode when on the ChibiOS idle thread -OPT_DEFS += -DCORTEX_ENABLE_WFI_IDLE=TRUE diff --git a/keyboards/input_club/whitefox/rules.mk b/keyboards/input_club/whitefox/rules.mk index 9b9b2ed739..821041ea83 100644 --- a/keyboards/input_club/whitefox/rules.mk +++ b/keyboards/input_club/whitefox/rules.mk @@ -12,5 +12,3 @@ AUDIO_ENABLE = no # Audio output LED_MATRIX_ENABLE = yes -# Enter lower-power sleep mode when on the ChibiOS idle thread -OPT_DEFS += -DCORTEX_ENABLE_WFI_IDLE=TRUE diff --git a/keyboards/irene/config.h b/keyboards/irene/config.h index 3ee3ed6316..fbd367a499 100644 --- a/keyboards/irene/config.h +++ b/keyboards/irene/config.h @@ -17,11 +17,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #pragma once -# define RGBLED_NUM 23 -//# define RGBLIGHT_HUE_STEP 8 -//# define RGBLIGHT_SAT_STEP 8 -//# define RGBLIGHT_VAL_STEP 8 -//# define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */ #define RGBLIGHT_EFFECT_BREATHING #define RGBLIGHT_EFFECT_RAINBOW_MOOD #define RGBLIGHT_EFFECT_RAINBOW_SWIRL diff --git a/keyboards/irene/info.json b/keyboards/irene/info.json index 000a343647..6dcefe4a2a 100644 --- a/keyboards/irene/info.json +++ b/keyboards/irene/info.json @@ -8,6 +8,9 @@ "pid": "0x3000", "device_version": "0.0.1" }, + "rgblight": { + "led_count": 23 + }, "ws2812": { "pin": "F1" }, diff --git a/keyboards/iron180/rules.mk b/keyboards/iron180/rules.mk index 488d0df4b9..6f5c5c3b7e 100644 --- a/keyboards/iron180/rules.mk +++ b/keyboards/iron180/rules.mk @@ -12,5 +12,3 @@ RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow AUDIO_ENABLE = no # Audio output ENCODER_ENABLE = no -# Enter lower-power sleep mode when on the ChibiOS idle thread -OPT_DEFS += -DCORTEX_ENABLE_WFI_IDLE=TRUE diff --git a/keyboards/jacky_studio/bear_65/config.h b/keyboards/jacky_studio/bear_65/config.h index c432e839d0..7bf08002dd 100644 --- a/keyboards/jacky_studio/bear_65/config.h +++ b/keyboards/jacky_studio/bear_65/config.h @@ -20,9 +20,3 @@ #define RGBLIGHT_EFFECT_RGB_TEST #define RGBLIGHT_EFFECT_ALTERNATING #define RGBLIGHT_EFFECT_TWINKLE -#define RGBLED_NUM 20 -#define RGBLIGHT_HUE_STEP 8 -#define RGBLIGHT_SAT_STEP 8 -#define RGBLIGHT_VAL_STEP 8 -/* If defined, the RGB lighting will be switched off when the host goes to sleep */ -#define RGBLIGHT_SLEEP diff --git a/keyboards/jacky_studio/bear_65/rev1/info.json b/keyboards/jacky_studio/bear_65/rev1/info.json index 77c0e44c0d..42b397ce73 100644 --- a/keyboards/jacky_studio/bear_65/rev1/info.json +++ b/keyboards/jacky_studio/bear_65/rev1/info.json @@ -25,7 +25,11 @@ "pin": "E2" }, "rgblight": { - "max_brightness": 200 + "saturation_steps": 8, + "brightness_steps": 8, + "led_count": 20, + "max_brightness": 200, + "sleep": true }, "indicators": { "caps_lock": "C7", diff --git a/keyboards/jacky_studio/bear_65/rev2/info.json b/keyboards/jacky_studio/bear_65/rev2/info.json index 8e1779ceea..50e53c3564 100644 --- a/keyboards/jacky_studio/bear_65/rev2/info.json +++ b/keyboards/jacky_studio/bear_65/rev2/info.json @@ -25,7 +25,11 @@ "pin": "E2" }, "rgblight": { - "max_brightness": 200 + "saturation_steps": 8, + "brightness_steps": 8, + "led_count": 20, + "max_brightness": 200, + "sleep": true }, "indicators": { "caps_lock": "C7", diff --git a/keyboards/jacky_studio/piggy60/rev2/rules.mk b/keyboards/jacky_studio/piggy60/rev2/rules.mk index 47220e8853..edbd3dd718 100644 --- a/keyboards/jacky_studio/piggy60/rev2/rules.mk +++ b/keyboards/jacky_studio/piggy60/rev2/rules.mk @@ -4,5 +4,3 @@ MCU_LDSCRIPT = STM32F103xB # Wildcard to allow APM32 MCU DFU_SUFFIX_ARGS = -p FFFF -v FFFF -# Enter lower-power sleep mode when on the ChibiOS idle thread -OPT_DEFS += -DCORTEX_ENABLE_WFI_IDLE=TRUE diff --git a/keyboards/jacky_studio/s7_elephant/rev1/config.h b/keyboards/jacky_studio/s7_elephant/rev1/config.h index e2d6aed274..19f04d522c 100644 --- a/keyboards/jacky_studio/s7_elephant/rev1/config.h +++ b/keyboards/jacky_studio/s7_elephant/rev1/config.h @@ -26,11 +26,6 @@ #define RGBLIGHT_EFFECT_RGB_TEST #define RGBLIGHT_EFFECT_ALTERNATING #define RGBLIGHT_EFFECT_TWINKLE -#define RGBLED_NUM 2 -#define RGBLIGHT_HUE_STEP 8 -#define RGBLIGHT_SAT_STEP 8 -#define RGBLIGHT_VAL_STEP 8 -#define RGBLIGHT_SLEEP /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ #define LOCKING_SUPPORT_ENABLE diff --git a/keyboards/jacky_studio/s7_elephant/rev1/info.json b/keyboards/jacky_studio/s7_elephant/rev1/info.json index 3af975eb5c..556ddd59bb 100644 --- a/keyboards/jacky_studio/s7_elephant/rev1/info.json +++ b/keyboards/jacky_studio/s7_elephant/rev1/info.json @@ -8,6 +8,12 @@ "pid": "0x0007", "device_version": "0.0.1" }, + "rgblight": { + "saturation_steps": 8, + "brightness_steps": 8, + "led_count": 2, + "sleep": true + }, "ws2812": { "pin": "E6" }, diff --git a/keyboards/jacky_studio/s7_elephant/rev2/config.h b/keyboards/jacky_studio/s7_elephant/rev2/config.h index 316658ad6d..19f04d522c 100644 --- a/keyboards/jacky_studio/s7_elephant/rev2/config.h +++ b/keyboards/jacky_studio/s7_elephant/rev2/config.h @@ -26,11 +26,6 @@ #define RGBLIGHT_EFFECT_RGB_TEST #define RGBLIGHT_EFFECT_ALTERNATING #define RGBLIGHT_EFFECT_TWINKLE -#define RGBLED_NUM 2 -#define RGBLIGHT_HUE_STEP 8 -#define RGBLIGHT_SAT_STEP 8 -#define RGBLIGHT_VAL_STEP 8 -#define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */ /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ #define LOCKING_SUPPORT_ENABLE diff --git a/keyboards/jacky_studio/s7_elephant/rev2/info.json b/keyboards/jacky_studio/s7_elephant/rev2/info.json index cc0c91dadc..f240959899 100644 --- a/keyboards/jacky_studio/s7_elephant/rev2/info.json +++ b/keyboards/jacky_studio/s7_elephant/rev2/info.json @@ -12,6 +12,12 @@ "cols": ["D0", "D1", "D2", "D3", "D5", "D4", "D6", "D7", "B4", "F7", "F6", "F5", "F4", "F1", "F0", "E6"], "rows": ["B0", "B1", "B2", "B3", "B7"] }, + "rgblight": { + "saturation_steps": 8, + "brightness_steps": 8, + "led_count": 2, + "sleep": true + }, "ws2812": { "pin": "E2" }, diff --git a/keyboards/jadookb/jkb65/config.h b/keyboards/jadookb/jkb65/config.h index a54e1e1fd3..8e0534fa2c 100644 --- a/keyboards/jadookb/jkb65/config.h +++ b/keyboards/jadookb/jkb65/config.h @@ -21,7 +21,6 @@ #define RGB_DISABLE_WHEN_USB_SUSPENDED #define RGB_MATRIX_FRAMEBUFFER_EFFECTS #define RGB_MATRIX_KEYPRESSES -#define RGB_MATRIX_TIMEOUT 90000 #define RGB_MATRIX_LED_PROCESS_LIMIT 4 #define RGB_MATRIX_LED_FLUSH_LIMIT 26 #define RGB_MATRIX_DEFAULT_MODE RGB_MATRIX_CYCLE_ALL diff --git a/keyboards/jadookb/jkb65/info.json b/keyboards/jadookb/jkb65/info.json index e235e7bc41..46e499237a 100644 --- a/keyboards/jadookb/jkb65/info.json +++ b/keyboards/jadookb/jkb65/info.json @@ -10,7 +10,8 @@ "pin": "F0" }, "rgb_matrix": { - "driver": "WS2812" + "driver": "WS2812", + "timeout": 90000 }, "processor": "atmega32u4", "bootloader": "atmel-dfu", diff --git a/keyboards/jc65/v32a/config.h b/keyboards/jc65/v32a/config.h index 6abe1d446d..cbd51af3b5 100644 --- a/keyboards/jc65/v32a/config.h +++ b/keyboards/jc65/v32a/config.h @@ -17,7 +17,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #pragma once -#define RGBLED_NUM 16 #define RGBLIGHT_EFFECT_BREATHING #define RGBLIGHT_EFFECT_RAINBOW_MOOD #define RGBLIGHT_EFFECT_RAINBOW_SWIRL @@ -28,7 +27,4 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #define RGBLIGHT_EFFECT_RGB_TEST #define RGBLIGHT_EFFECT_ALTERNATING #define RGBLIGHT_EFFECT_TWINKLE -#define RGBLIGHT_HUE_STEP 8 -#define RGBLIGHT_SAT_STEP 8 -#define RGBLIGHT_VAL_STEP 8 #define RGBLIGHT_EFFECT_KNIGHT_LED_NUM 8 diff --git a/keyboards/jc65/v32a/info.json b/keyboards/jc65/v32a/info.json index 0c6413d587..3067978e83 100644 --- a/keyboards/jc65/v32a/info.json +++ b/keyboards/jc65/v32a/info.json @@ -16,6 +16,11 @@ "backlight": { "pin": "D4" }, + "rgblight": { + "saturation_steps": 8, + "brightness_steps": 8, + "led_count": 16 + }, "ws2812": { "driver": "i2c" }, diff --git a/keyboards/jc65/v32u4/config.h b/keyboards/jc65/v32u4/config.h index 35107f1518..05d2733f8b 100644 --- a/keyboards/jc65/v32u4/config.h +++ b/keyboards/jc65/v32u4/config.h @@ -27,7 +27,3 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #define RGBLIGHT_EFFECT_RGB_TEST #define RGBLIGHT_EFFECT_ALTERNATING #define RGBLIGHT_EFFECT_TWINKLE -#define RGBLED_NUM 20 -#define RGBLIGHT_HUE_STEP 8 -#define RGBLIGHT_SAT_STEP 8 -#define RGBLIGHT_VAL_STEP 8 diff --git a/keyboards/jc65/v32u4/info.json b/keyboards/jc65/v32u4/info.json index 1c56cc00ee..4d1cd45e25 100644 --- a/keyboards/jc65/v32u4/info.json +++ b/keyboards/jc65/v32u4/info.json @@ -16,6 +16,11 @@ "backlight": { "pin": "B6" }, + "rgblight": { + "saturation_steps": 8, + "brightness_steps": 8, + "led_count": 20 + }, "ws2812": { "pin": "E2" }, diff --git a/keyboards/jc65/v32u4/keymaps/gam3cat/keymap.c b/keyboards/jc65/v32u4/keymaps/gam3cat/keymap.c index b7349de55a..e0046073c6 100644 --- a/keyboards/jc65/v32u4/keymaps/gam3cat/keymap.c +++ b/keyboards/jc65/v32u4/keymaps/gam3cat/keymap.c @@ -219,10 +219,6 @@ void matrix_init_user(void) { #endif } -void matrix_scan_user(void) { - -} - layer_state_t layer_state_set_user(layer_state_t state) { switch (get_highest_layer(state)) { case _BL: @@ -260,7 +256,3 @@ layer_state_t layer_state_set_user(layer_state_t state) { } return state; } - -void led_set_user(uint8_t usb_led) { - -} diff --git a/keyboards/jd40/config.h b/keyboards/jd40/config.h index cec546538a..873b67a11d 100644 --- a/keyboards/jd40/config.h +++ b/keyboards/jd40/config.h @@ -32,7 +32,3 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #define RGBLIGHT_EFFECT_RGB_TEST #define RGBLIGHT_EFFECT_ALTERNATING #define RGBLIGHT_EFFECT_TWINKLE -#define RGBLED_NUM 12 // Number of LEDs -#define RGBLIGHT_HUE_STEP 8 -#define RGBLIGHT_SAT_STEP 8 -#define RGBLIGHT_VAL_STEP 8 diff --git a/keyboards/jd40/info.json b/keyboards/jd40/info.json index 1e11f466a0..3cdc06f7a4 100644 --- a/keyboards/jd40/info.json +++ b/keyboards/jd40/info.json @@ -8,6 +8,11 @@ "pid": "0x6060", "device_version": "0.0.1" }, + "rgblight": { + "saturation_steps": 8, + "brightness_steps": 8, + "led_count": 12 + }, "ws2812": { "pin": "D3" }, diff --git a/keyboards/jels/jels88/config.h b/keyboards/jels/jels88/config.h index 6ce24bfbde..491c0f4304 100644 --- a/keyboards/jels/jels88/config.h +++ b/keyboards/jels/jels88/config.h @@ -17,8 +17,6 @@ #pragma once #ifdef RGBLIGHT_ENABLE -#define RGBLED_NUM 20 // Number of LEDs -#define RGBLIGHT_SLEEP #define RGBLIGHT_EFFECT_BREATHING #define RGBLIGHT_EFFECT_RAINBOW_MOOD #define RGBLIGHT_EFFECT_RAINBOW_SWIRL diff --git a/keyboards/jels/jels88/info.json b/keyboards/jels/jels88/info.json index 2dc7c2f2ac..57845fa1a2 100644 --- a/keyboards/jels/jels88/info.json +++ b/keyboards/jels/jels88/info.json @@ -20,7 +20,9 @@ "pin": "B6" }, "rgblight": { - "max_brightness": 225 + "led_count": 20, + "max_brightness": 225, + "sleep": true }, "processor": "atmega32u4", "bootloader": "atmel-dfu", diff --git a/keyboards/jian/nsrev2/config.h b/keyboards/jian/nsrev2/config.h index 5bd79d3ce0..324c04e35f 100644 --- a/keyboards/jian/nsrev2/config.h +++ b/keyboards/jian/nsrev2/config.h @@ -21,7 +21,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. /* ws2812 RGB LED */ #define RGBLIGHT_TIMER -#define RGBLED_NUM 7 // Number of LEDs #define RGBLIGHT_EFFECT_BREATHING #define RGBLIGHT_EFFECT_RAINBOW_MOOD #define RGBLIGHT_EFFECT_RAINBOW_SWIRL @@ -33,9 +32,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #define RGBLIGHT_EFFECT_ALTERNATING #define RGBLIGHT_EFFECT_TWINKLE -#define RGBLIGHT_SLEEP -#define RGBLIGHT_SPLIT - #ifndef IOS_DEVICE_ENABLE #if RGBLED_NUM <= 6 #define RGBLIGHT_LIMIT_VAL 255 @@ -51,8 +47,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #endif #define RGBLIGHT_VAL_STEP 4 #endif -#define RGBLIGHT_HUE_STEP 10 -#define RGBLIGHT_SAT_STEP 17 #if defined(RGBLIGHT_ENABLE) && !defined(IOS_DEVICE_ENABLE) #define USB_MAX_POWER_CONSUMPTION 400 diff --git a/keyboards/jian/nsrev2/info.json b/keyboards/jian/nsrev2/info.json index 955fc517de..d1ca0639bb 100644 --- a/keyboards/jian/nsrev2/info.json +++ b/keyboards/jian/nsrev2/info.json @@ -13,6 +13,12 @@ "levels": 5, "breathing": true }, + "rgblight": { + "hue_steps": 10, + "led_count": 7, + "sleep": true, + "split": true + }, "ws2812": { "pin": "D4" }, diff --git a/keyboards/jian/rev1/config.h b/keyboards/jian/rev1/config.h index 11b99cc739..22c9bf303e 100644 --- a/keyboards/jian/rev1/config.h +++ b/keyboards/jian/rev1/config.h @@ -73,7 +73,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. /* ws2812 RGB LED */ #define RGBLIGHT_TIMER -#define RGBLED_NUM 7 // Number of LEDs #define RGBLIGHT_EFFECT_BREATHING #define RGBLIGHT_EFFECT_RAINBOW_MOOD #define RGBLIGHT_EFFECT_RAINBOW_SWIRL @@ -85,28 +84,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #define RGBLIGHT_EFFECT_ALTERNATING #define RGBLIGHT_EFFECT_TWINKLE - -#define RGBLIGHT_SLEEP -#define RGBLIGHT_SPLIT - -#ifndef IOS_DEVICE_ENABLE -#if RGBLED_NUM <= 6 -#define RGBLIGHT_LIMIT_VAL 255 -#else -#define RGBLIGHT_LIMIT_VAL 130 -#endif -#define RGBLIGHT_VAL_STEP 8 -#else -#if RGBLED_NUM <= 6 -#define RGBLIGHT_LIMIT_VAL 90 -#else -#define RGBLIGHT_LIMIT_VAL 45 -#endif -#define RGBLIGHT_VAL_STEP 4 -#endif -#define RGBLIGHT_HUE_STEP 10 -#define RGBLIGHT_SAT_STEP 17 - #if defined(RGBLIGHT_ENABLE) && !defined(IOS_DEVICE_ENABLE) #define USB_MAX_POWER_CONSUMPTION 400 #else diff --git a/keyboards/jian/rev1/info.json b/keyboards/jian/rev1/info.json index e7e386088a..c1cde6e7e8 100644 --- a/keyboards/jian/rev1/info.json +++ b/keyboards/jian/rev1/info.json @@ -12,6 +12,12 @@ "pin": "B6", "levels": 5 }, + "rgblight": { + "hue_steps": 10, + "led_count": 7, + "sleep": true, + "split": true + }, "ws2812": { "pin": "D4" }, diff --git a/keyboards/jian/rev1/post_config.h b/keyboards/jian/rev1/post_config.h new file mode 100644 index 0000000000..fade065e19 --- /dev/null +++ b/keyboards/jian/rev1/post_config.h @@ -0,0 +1,17 @@ +#pragma once + +#ifndef IOS_DEVICE_ENABLE +# if RGBLED_NUM <= 6 +# define RGBLIGHT_LIMIT_VAL 255 +# else +# define RGBLIGHT_LIMIT_VAL 130 +# endif +# define RGBLIGHT_VAL_STEP 8 +#else +# if RGBLED_NUM <= 6 +# define RGBLIGHT_LIMIT_VAL 90 +# else +# define RGBLIGHT_LIMIT_VAL 45 +# endif +# define RGBLIGHT_VAL_STEP 4 +#endif diff --git a/keyboards/jian/rev2/config.h b/keyboards/jian/rev2/config.h index 147c2cf147..4d86f1659e 100644 --- a/keyboards/jian/rev2/config.h +++ b/keyboards/jian/rev2/config.h @@ -25,7 +25,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. /* ws2812 RGB LED */ #define RGBLIGHT_TIMER -#define RGBLED_NUM 7 // Number of LEDs #define RGBLIGHT_EFFECT_BREATHING #define RGBLIGHT_EFFECT_RAINBOW_MOOD #define RGBLIGHT_EFFECT_RAINBOW_SWIRL @@ -37,27 +36,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #define RGBLIGHT_EFFECT_ALTERNATING #define RGBLIGHT_EFFECT_TWINKLE -#define RGBLIGHT_SLEEP -#define RGBLIGHT_SPLIT - -#ifndef IOS_DEVICE_ENABLE -#if RGBLED_NUM <= 6 -#define RGBLIGHT_LIMIT_VAL 255 -#else -#define RGBLIGHT_LIMIT_VAL 130 -#endif -#define RGBLIGHT_VAL_STEP 8 -#else -#if RGBLED_NUM <= 6 -#define RGBLIGHT_LIMIT_VAL 90 -#else -#define RGBLIGHT_LIMIT_VAL 45 -#endif -#define RGBLIGHT_VAL_STEP 4 -#endif -#define RGBLIGHT_HUE_STEP 10 -#define RGBLIGHT_SAT_STEP 17 - #if defined(RGBLIGHT_ENABLE) && !defined(IOS_DEVICE_ENABLE) #define USB_MAX_POWER_CONSUMPTION 400 #else diff --git a/keyboards/jian/rev2/info.json b/keyboards/jian/rev2/info.json index 7fecaed1f0..90cbefc334 100644 --- a/keyboards/jian/rev2/info.json +++ b/keyboards/jian/rev2/info.json @@ -12,6 +12,12 @@ "pin": "C6", "levels": 5 }, + "rgblight": { + "hue_steps": 10, + "led_count": 7, + "sleep": true, + "split": true + }, "ws2812": { "pin": "D4" }, diff --git a/keyboards/jian/rev2/post_config.h b/keyboards/jian/rev2/post_config.h new file mode 100644 index 0000000000..fade065e19 --- /dev/null +++ b/keyboards/jian/rev2/post_config.h @@ -0,0 +1,17 @@ +#pragma once + +#ifndef IOS_DEVICE_ENABLE +# if RGBLED_NUM <= 6 +# define RGBLIGHT_LIMIT_VAL 255 +# else +# define RGBLIGHT_LIMIT_VAL 130 +# endif +# define RGBLIGHT_VAL_STEP 8 +#else +# if RGBLED_NUM <= 6 +# define RGBLIGHT_LIMIT_VAL 90 +# else +# define RGBLIGHT_LIMIT_VAL 45 +# endif +# define RGBLIGHT_VAL_STEP 4 +#endif diff --git a/keyboards/jiran/rev2/config.h b/keyboards/jiran/rev2/config.h index ce78530cb7..219e4dc5d5 100644 --- a/keyboards/jiran/rev2/config.h +++ b/keyboards/jiran/rev2/config.h @@ -27,9 +27,3 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #define RGBLIGHT_EFFECT_RGB_TEST #define RGBLIGHT_EFFECT_ALTERNATING #define RGBLIGHT_EFFECT_TWINKLE -#define RGBLED_NUM 56 -#define RGBLIGHT_SPLIT -#define RGBLED_SPLIT { 28, 28 } -#define RGBLIGHT_HUE_STEP 10 -#define RGBLIGHT_SAT_STEP 17 -#define RGBLIGHT_VAL_STEP 17 diff --git a/keyboards/jiran/rev2/info.json b/keyboards/jiran/rev2/info.json index 8539b47652..dab79134ed 100644 --- a/keyboards/jiran/rev2/info.json +++ b/keyboards/jiran/rev2/info.json @@ -1,4 +1,9 @@ { + "rgblight": { + "hue_steps": 10, + "led_count": 56, + "split_count": [28, 28] + }, "ws2812": { "pin": "B6" }, diff --git a/keyboards/jkeys_design/gentleman65/config.h b/keyboards/jkeys_design/gentleman65/config.h index 1b66b1bb25..764748f3da 100644 --- a/keyboards/jkeys_design/gentleman65/config.h +++ b/keyboards/jkeys_design/gentleman65/config.h @@ -18,7 +18,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #pragma once -#define RGBLED_NUM 14 #define RGBLIGHT_EFFECT_BREATHING #define RGBLIGHT_EFFECT_RAINBOW_MOOD #define RGBLIGHT_EFFECT_RAINBOW_SWIRL diff --git a/keyboards/jkeys_design/gentleman65/info.json b/keyboards/jkeys_design/gentleman65/info.json index 9624933b8d..3586c8ed19 100644 --- a/keyboards/jkeys_design/gentleman65/info.json +++ b/keyboards/jkeys_design/gentleman65/info.json @@ -8,6 +8,9 @@ "pid": "0x2020", "device_version": "0.0.1" }, + "rgblight": { + "led_count": 14 + }, "ws2812": { "pin": "F4" }, diff --git a/keyboards/jkeys_design/gentleman65_se_s/config.h b/keyboards/jkeys_design/gentleman65_se_s/config.h index 1b66b1bb25..764748f3da 100644 --- a/keyboards/jkeys_design/gentleman65_se_s/config.h +++ b/keyboards/jkeys_design/gentleman65_se_s/config.h @@ -18,7 +18,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #pragma once -#define RGBLED_NUM 14 #define RGBLIGHT_EFFECT_BREATHING #define RGBLIGHT_EFFECT_RAINBOW_MOOD #define RGBLIGHT_EFFECT_RAINBOW_SWIRL diff --git a/keyboards/jkeys_design/gentleman65_se_s/info.json b/keyboards/jkeys_design/gentleman65_se_s/info.json index 6886f8f24b..2108bad6d2 100644 --- a/keyboards/jkeys_design/gentleman65_se_s/info.json +++ b/keyboards/jkeys_design/gentleman65_se_s/info.json @@ -8,6 +8,9 @@ "pid": "0x2322", "device_version": "0.0.1" }, + "rgblight": { + "led_count": 14 + }, "ws2812": { "pin": "F7" }, diff --git a/keyboards/jm60/rules.mk b/keyboards/jm60/rules.mk index 47b3dc0faa..5dbf13f5e7 100644 --- a/keyboards/jm60/rules.mk +++ b/keyboards/jm60/rules.mk @@ -20,5 +20,3 @@ BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow AUDIO_ENABLE = no # Audio output -# Enter lower-power sleep mode when on the ChibiOS idle thread -OPT_DEFS += -DCORTEX_ENABLE_WFI_IDLE=TRUE diff --git a/keyboards/jolofsor/denial75/config.h b/keyboards/jolofsor/denial75/config.h index a80552a780..785fdc3e5e 100644 --- a/keyboards/jolofsor/denial75/config.h +++ b/keyboards/jolofsor/denial75/config.h @@ -24,9 +24,4 @@ /* RGB Definitions */ - -#define RGBLED_NUM 84 #define RGBLIGHT_MAX_LAYERS 32 -#define RGBLIGHT_HUE_STEP 10 -#define RGBLIGHT_SAT_STEP 17 -#define RGBLIGHT_VAL_STEP 17 diff --git a/keyboards/jolofsor/denial75/info.json b/keyboards/jolofsor/denial75/info.json index 6f1388f49e..545243e410 100644 --- a/keyboards/jolofsor/denial75/info.json +++ b/keyboards/jolofsor/denial75/info.json @@ -16,6 +16,8 @@ "pin": "D2" }, "rgblight": { + "hue_steps": 10, + "led_count": 84, "max_brightness": 200 }, "diode_direction": "COL2ROW", diff --git a/keyboards/jones/v03/config.h b/keyboards/jones/v03/config.h index 1d6b6e7ad9..212bad3b77 100644 --- a/keyboards/jones/v03/config.h +++ b/keyboards/jones/v03/config.h @@ -37,10 +37,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #define MATRIX_ROW_PINS { D4, D7, C7, F1, F4, F5, D6, D5, E6, B0, B1 } #define MATRIX_COL_PINS { D4, D7, C7, F1, F4, F5, D6, D5, E6, B0, B1 } -/* COL2ROW, ROW2COL*/ -// No need to define DIODE_DIRECTION for Jones' custom Round-Robin matrix. -//#define DIODE_DIRECTION COL2ROW - /* Audio */ #ifdef AUDIO_ENABLE #define AUDIO_PIN C6 @@ -48,11 +44,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #define AUDIO_CLICKY #endif - #define RGBLED_NUM 6 // Left(4) + Right(2) - #define RGBLIGHT_HUE_STEP 8 - #define RGBLIGHT_SAT_STEP 8 - #define RGBLIGHT_VAL_STEP 8 - // #define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */ /*== Lighting Layers ==*/ #define RGBLIGHT_LAYERS // #define RGBLIGHT_MAX_LAYERS 2 diff --git a/keyboards/jones/v03/info.json b/keyboards/jones/v03/info.json index 6b4dbb0884..41b3937c02 100644 --- a/keyboards/jones/v03/info.json +++ b/keyboards/jones/v03/info.json @@ -14,6 +14,11 @@ {"pin_a": "B3", "pin_b": "B2"} ] }, + "rgblight": { + "saturation_steps": 8, + "brightness_steps": 8, + "led_count": 6 + }, "ws2812": { "pin": "B7" }, diff --git a/keyboards/jones/v03_1/config.h b/keyboards/jones/v03_1/config.h index b3eb44a156..eae7755da6 100644 --- a/keyboards/jones/v03_1/config.h +++ b/keyboards/jones/v03_1/config.h @@ -37,10 +37,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #define MATRIX_ROW_PINS { D4, D7, C7, F1, F4, F5, D6, D5, E6, B0, B1 } #define MATRIX_COL_PINS { D4, D7, C7, F1, F4, F5, D6, D5, E6, B0, B1 } -/* COL2ROW, ROW2COL*/ -// No need to define DIODE_DIRECTION for Jones' custom Round-Robin matrix. -//#define DIODE_DIRECTION COL2ROW - /* Audio */ #ifdef AUDIO_ENABLE #define AUDIO_PIN C6 @@ -48,12 +44,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #define AUDIO_CLICKY #endif - #define RGBLED_NUM 14 // Left(4) + Right(2) + Under(8) - #define RGBLIGHT_LED_MAP {0,1,2,3,13,12,4,5,6,7,8,9,10,11} // Left --> Right --> Under - #define RGBLIGHT_HUE_STEP 8 - #define RGBLIGHT_SAT_STEP 8 - #define RGBLIGHT_VAL_STEP 8 - // #define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */ /*== Lighting Layers ==*/ #define RGBLIGHT_LAYERS // #define RGBLIGHT_MAX_LAYERS 2 diff --git a/keyboards/jones/v03_1/info.json b/keyboards/jones/v03_1/info.json index d0fec4e571..41694a733c 100644 --- a/keyboards/jones/v03_1/info.json +++ b/keyboards/jones/v03_1/info.json @@ -14,6 +14,12 @@ {"pin_a": "B3", "pin_b": "B2"} ] }, + "rgblight": { + "saturation_steps": 8, + "brightness_steps": 8, + "led_count": 14, + "led_map": [0, 1, 2, 3, 13, 12, 4, 5, 6, 7, 8, 9, 10, 11] + }, "ws2812": { "pin": "F0" }, diff --git a/keyboards/jones/v1/config.h b/keyboards/jones/v1/config.h index 3017ca2ab0..e36574e56a 100644 --- a/keyboards/jones/v1/config.h +++ b/keyboards/jones/v1/config.h @@ -25,10 +25,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #endif /* RGBLIGHT */ - #define RGBLED_NUM 4 // Left(2) + Right(2) - #define RGBLIGHT_HUE_STEP 8 - #define RGBLIGHT_SAT_STEP 8 - #define RGBLIGHT_VAL_STEP 8 /*== Lighting Layers ==*/ #define RGBLIGHT_LAYERS #define RGBLIGHT_LAYERS_OVERRIDE_RGB_OFF // Overriding RGB Lighting on/off status diff --git a/keyboards/jones/v1/info.json b/keyboards/jones/v1/info.json index cd0286ef6b..fdc5cbd310 100644 --- a/keyboards/jones/v1/info.json +++ b/keyboards/jones/v1/info.json @@ -12,6 +12,11 @@ "cols": ["B3", "B2", "E6", "D6", "D4", "B0", "B1", "B7", "B4", "D7"], "rows": ["B3", "B2", "E6", "D6", "D4", "B0", "B1", "B7", "B4", "D7"] }, + "rgblight": { + "saturation_steps": 8, + "brightness_steps": 8, + "led_count": 4 + }, "ws2812": { "pin": "F1" }, @@ -30,87 +35,81 @@ "layouts": { "LAYOUT": { "layout": [ - {"label": "k09", "matrix": [0, 9], "x": 0.5, "y": 0}, - {"label": "k59", "matrix": [5, 9], "x": 1.5, "y": 0}, - {"label": "k08", "matrix": [0, 8], "x": 2.5, "y": 0}, - {"label": "k54", "matrix": [5, 4], "x": 3.5, "y": 0}, - {"label": "k04", "matrix": [0, 4], "x": 4.5, "y": 0}, - {"label": "k50", "matrix": [5, 0], "x": 5.5, "y": 0}, - {"label": "k56", "matrix": [5, 6], "x": 6.5, "y": 0}, - {"label": "k06", "matrix": [0, 6], "x": 7.5, "y": 0}, - {"label": "k05", "matrix": [0, 5], "x": 8.5, "y": 0}, - {"label": "k52", "matrix": [5, 2], "x": 9.5, "y": 0}, - {"label": "k02", "matrix": [0, 2], "x": 10.5, "y": 0}, - {"label": "k53", "matrix": [5, 3], "x": 11.5, "y": 0}, - {"label": "k07", "matrix": [0, 7], "x": 12.5, "y": 0}, - {"label": "k51", "matrix": [5, 1], "x": 13.5, "y": 0}, - {"label": "k01", "matrix": [0, 1], "x": 14.5, "y": 0}, - - {"label": "k19", "matrix": [1, 9], "x": 0.5, "y": 1, "w": 1.5}, - {"label": "k69", "matrix": [6, 9], "x": 2, "y": 1}, - {"label": "k18", "matrix": [1, 8], "x": 3, "y": 1}, - {"label": "k64", "matrix": [6, 4], "x": 4, "y": 1}, - {"label": "k14", "matrix": [1, 4], "x": 5, "y": 1}, - {"label": "k60", "matrix": [6, 0], "x": 6, "y": 1}, - {"label": "k10", "matrix": [1, 0], "x": 7, "y": 1}, - {"label": "k16", "matrix": [1, 6], "x": 8, "y": 1}, - {"label": "k15", "matrix": [1, 5], "x": 9, "y": 1}, - {"label": "k62", "matrix": [6, 2], "x": 10, "y": 1}, - {"label": "k12", "matrix": [1, 2], "x": 11, "y": 1}, - {"label": "k63", "matrix": [6, 3], "x": 12, "y": 1}, - {"label": "k17", "matrix": [1, 7], "x": 13, "y": 1}, - {"label": "k61", "matrix": [6, 1], "x": 14, "y": 1, "w": 1.5}, - - {"label": "k29", "matrix": [2, 9], "x": 0.5, "y": 2, "w": 1.5}, - {"label": "k79", "matrix": [7, 9], "x": 2, "y": 2}, - {"label": "k28", "matrix": [2, 8], "x": 3, "y": 2}, - {"label": "k74", "matrix": [7, 4], "x": 4, "y": 2}, - {"label": "k24", "matrix": [2, 4], "x": 5, "y": 2}, - {"label": "k70", "matrix": [7, 0], "x": 6, "y": 2}, - {"label": "k20", "matrix": [2, 0], "x": 7, "y": 2}, - {"label": "k26", "matrix": [2, 6], "x": 8, "y": 2}, - {"label": "k25", "matrix": [2, 5], "x": 9, "y": 2}, - {"label": "k72", "matrix": [7, 2], "x": 10, "y": 2}, - {"label": "k23", "matrix": [2, 3], "x": 11, "y": 2}, - {"label": "k73", "matrix": [7, 3], "x": 12, "y": 2}, - {"label": "k27", "matrix": [2, 7], "x": 13, "y": 2}, - {"label": "k71", "matrix": [7, 1], "x": 14, "y": 2, "w": 1.5}, + {"label": "k09", "matrix": [0, 9], "x": 0, "y": 0}, + {"label": "k59", "matrix": [5, 9], "x": 1, "y": 0}, + {"label": "k08", "matrix": [0, 8], "x": 2, "y": 0}, + {"label": "k54", "matrix": [5, 4], "x": 3, "y": 0}, + {"label": "k04", "matrix": [0, 4], "x": 4, "y": 0}, + {"label": "k50", "matrix": [5, 0], "x": 5, "y": 0}, + {"label": "k56", "matrix": [5, 6], "x": 6, "y": 0}, + {"label": "k06", "matrix": [0, 6], "x": 7, "y": 0}, + {"label": "k05", "matrix": [0, 5], "x": 8, "y": 0}, + {"label": "k52", "matrix": [5, 2], "x": 9, "y": 0}, + {"label": "k02", "matrix": [0, 2], "x": 10, "y": 0}, + {"label": "k53", "matrix": [5, 3], "x": 11, "y": 0}, + {"label": "k07", "matrix": [0, 7], "x": 12, "y": 0}, + {"label": "k51", "matrix": [5, 1], "x": 13, "y": 0}, + {"label": "k01", "matrix": [0, 1], "x": 14, "y": 0}, - {"label": "k39", "matrix": [3, 9], "x": 0.5, "y": 3}, - {"label": "k89", "matrix": [8, 9], "x": 1.5, "y": 3}, - {"label": "k38", "matrix": [3, 8], "x": 2.5, "y": 3}, - {"label": "k84", "matrix": [8, 4], "x": 3.5, "y": 3}, - {"label": "k34", "matrix": [3, 4], "x": 4.5, "y": 3}, - {"label": "k80", "matrix": [8, 0], "x": 5.5, "y": 3}, - {"label": "k30", "matrix": [3, 0], "x": 6.5, "y": 3}, - {"label": "k36", "matrix": [3, 6], "x": 7.5, "y": 3}, - {"label": "k35", "matrix": [3, 5], "x": 8.5, "y": 3}, - {"label": "k82", "matrix": [8, 2], "x": 9.5, "y": 3}, - {"label": "k32", "matrix": [3, 2], "x": 10.5, "y": 3}, - {"label": "k83", "matrix": [8, 3], "x": 11.5, "y": 3}, - {"label": "k37", "matrix": [3, 7], "x": 12.5, "y": 3}, - {"label": "k81", "matrix": [8, 1], "x": 13.5, "y": 3}, - {"label": "k31", "matrix": [3, 1], "x": 14.5, "y": 3}, + {"label": "k19", "matrix": [1, 9], "x": 0, "y": 1, "w": 1.5}, + {"label": "k69", "matrix": [6, 9], "x": 1.5, "y": 1}, + {"label": "k18", "matrix": [1, 8], "x": 2.5, "y": 1}, + {"label": "k64", "matrix": [6, 4], "x": 3.5, "y": 1}, + {"label": "k14", "matrix": [1, 4], "x": 4.5, "y": 1}, + {"label": "k60", "matrix": [6, 0], "x": 5.5, "y": 1}, + {"label": "k10", "matrix": [1, 0], "x": 6.5, "y": 1}, + {"label": "k16", "matrix": [1, 6], "x": 7.5, "y": 1}, + {"label": "k15", "matrix": [1, 5], "x": 8.5, "y": 1}, + {"label": "k62", "matrix": [6, 2], "x": 9.5, "y": 1}, + {"label": "k12", "matrix": [1, 2], "x": 10.5, "y": 1}, + {"label": "k63", "matrix": [6, 3], "x": 11.5, "y": 1}, + {"label": "k17", "matrix": [1, 7], "x": 12.5, "y": 1}, + {"label": "k61", "matrix": [6, 1], "x": 13.5, "y": 1, "w": 1.5}, - {"label": "k49", "matrix": [4, 9], "x": 0.5, "y": 4}, - {"label": "k98", "matrix": [9, 8], "x": 1.5, "y": 4}, - {"label": "k48", "matrix": [4, 8], "x": 2.5, "y": 4, "w": 1.25}, - {"label": "k94", "matrix": [9, 4], "x": 3.75, "y": 4, "w": 1.25}, - {"label": "k90", "matrix": [9, 0], "x": 5, "y": 4, "w": 1.5}, - {"label": "k46", "matrix": [4, 6], "x": 6.5, "y": 4}, - {"label": "k45", "matrix": [4, 5], "x": 7.5, "y": 4}, - {"label": "k92", "matrix": [9, 2], "x": 8.5, "y": 4}, - {"label": "k42", "matrix": [4, 2], "x": 9.5, "y": 4, "w": 1.5}, - {"label": "k93", "matrix": [9, 3], "x": 11, "y": 4, "w": 1.25}, - {"label": "k47", "matrix": [4, 7], "x": 12.25, "y": 4, "w": 1.25}, - {"label": "k91", "matrix": [9, 1], "x": 13.5, "y": 4}, - {"label": "k41", "matrix": [4, 1], "x": 14.5, "y": 4}, + {"label": "k29", "matrix": [2, 9], "x": 0, "y": 2, "w": 1.5}, + {"label": "k79", "matrix": [7, 9], "x": 1.5, "y": 2}, + {"label": "k28", "matrix": [2, 8], "x": 2.5, "y": 2}, + {"label": "k74", "matrix": [7, 4], "x": 3.5, "y": 2}, + {"label": "k24", "matrix": [2, 4], "x": 4.5, "y": 2}, + {"label": "k70", "matrix": [7, 0], "x": 5.5, "y": 2}, + {"label": "k20", "matrix": [2, 0], "x": 6.5, "y": 2}, + {"label": "k26", "matrix": [2, 6], "x": 7.5, "y": 2}, + {"label": "k25", "matrix": [2, 5], "x": 8.5, "y": 2}, + {"label": "k72", "matrix": [7, 2], "x": 9.5, "y": 2}, + {"label": "k23", "matrix": [2, 3], "x": 10.5, "y": 2}, + {"label": "k73", "matrix": [7, 3], "x": 11.5, "y": 2}, + {"label": "k27", "matrix": [2, 7], "x": 12.5, "y": 2}, + {"label": "k71", "matrix": [7, 1], "x": 13.5, "y": 2, "w": 1.5}, - {"label": "k85", "matrix": [8, 5], "x": 0, "y": 5}, - {"label": "k86", "matrix": [8, 6], "x": 1, "y": 5}, + {"label": "k39", "matrix": [3, 9], "x": 0, "y": 3}, + {"label": "k89", "matrix": [8, 9], "x": 1, "y": 3}, + {"label": "k38", "matrix": [3, 8], "x": 2, "y": 3}, + {"label": "k84", "matrix": [8, 4], "x": 3, "y": 3}, + {"label": "k34", "matrix": [3, 4], "x": 4, "y": 3}, + {"label": "k80", "matrix": [8, 0], "x": 5, "y": 3}, + {"label": "k30", "matrix": [3, 0], "x": 6, "y": 3}, + {"label": "k36", "matrix": [3, 6], "x": 7, "y": 3}, + {"label": "k35", "matrix": [3, 5], "x": 8, "y": 3}, + {"label": "k82", "matrix": [8, 2], "x": 9, "y": 3}, + {"label": "k32", "matrix": [3, 2], "x": 10, "y": 3}, + {"label": "k83", "matrix": [8, 3], "x": 11, "y": 3}, + {"label": "k37", "matrix": [3, 7], "x": 12, "y": 3}, + {"label": "k81", "matrix": [8, 1], "x": 13, "y": 3}, + {"label": "k31", "matrix": [3, 1], "x": 14, "y": 3}, - {"label": "k95", "matrix": [9, 5], "x": 14, "y": 5}, - {"label": "k96", "matrix": [9, 6], "x": 15, "y": 5} + {"label": "k49", "matrix": [4, 9], "x": 0, "y": 4}, + {"label": "k98", "matrix": [9, 8], "x": 1, "y": 4}, + {"label": "k48", "matrix": [4, 8], "x": 2, "y": 4, "w": 1.25}, + {"label": "k94", "matrix": [9, 4], "x": 3.25, "y": 4, "w": 1.25}, + {"label": "k90", "matrix": [9, 0], "x": 4.5, "y": 4, "w": 1.5}, + {"label": "k46", "matrix": [4, 6], "x": 6, "y": 4}, + {"label": "k45", "matrix": [4, 5], "x": 7, "y": 4}, + {"label": "k92", "matrix": [9, 2], "x": 8, "y": 4}, + {"label": "k42", "matrix": [4, 2], "x": 9, "y": 4, "w": 1.5}, + {"label": "k93", "matrix": [9, 3], "x": 10.5, "y": 4, "w": 1.25}, + {"label": "k47", "matrix": [4, 7], "x": 11.75, "y": 4, "w": 1.25}, + {"label": "k91", "matrix": [9, 1], "x": 13, "y": 4}, + {"label": "k41", "matrix": [4, 1], "x": 14, "y": 4} ] } } diff --git a/keyboards/jones/v1/keymaps/default/keymap.c b/keyboards/jones/v1/keymaps/default/keymap.c index 04da840a77..752c06f815 100644 --- a/keyboards/jones/v1/keymaps/default/keymap.c +++ b/keyboards/jones/v1/keymaps/default/keymap.c @@ -34,31 +34,27 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_LBRC, KC_RBRC, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_BSPC, KC_LCTL, KC_A, KC_S, KC_D, KC_F, KC_G, KC_SCLN, KC_QUOT, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_ENT, KC_LSFT, KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_LEFT, KC_RGHT, KC_N, KC_M, KC_COMM, KC_DOT, KC_UP, KC_SLSH, - KC_MUTE, KC_LNG2, KC_LGUI, KC_LALT, SP_LOW, SP_RAI, KC_BSPC, SP_RAI,KC_RALT, KC_RALT, KC_LEFT, KC_DOWN, KC_RGHT, - KC_VOLD, KC_VOLU, KC_VOLD, KC_VOLU + KC_MUTE, KC_LNG2, KC_LGUI, KC_LALT, SP_LOW, SP_RAI, KC_BSPC, SP_RAI,KC_RALT, KC_RALT, KC_LEFT, KC_DOWN, KC_RGHT ), [_LOWER] = LAYOUT( _______, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, _______, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_ESC, KC_EXLM, KC_AT, KC_HASH, KC_DLR, KC_PERC, _______, _______, KC_CIRC, KC_AMPR, KC_ASTR, KC_LPRN, KC_RPRN, KC_INS, _______, _______, _______, _______, _______, _______, _______, _______, KC_GRV, KC_MINS, KC_EQL, KC_LBRC, KC_RBRC, KC_BSLS, _______, _______, KC_MUTE, KC_VOLD, KC_VOLU, _______, _______, _______, _______, KC_TILD, KC_UNDS, KC_PLUS, KC_LCBR, KC_RCBR, KC_PIPE, - _______, _______, _______, _______, _______, _______, _______, SP_ADJ,_______, _______, _______, _______, _______, - _______, _______, _______, _______ + _______, _______, _______, _______, _______, _______, _______, SP_ADJ,_______, _______, _______, _______, _______ ), [_RAISE] = LAYOUT( KC_GRV, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, _______, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, _______, _______, KC_6, KC_7, KC_8, KC_9, KC_0, KC_DEL, _______, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, _______, _______, KC_LEFT, KC_DOWN, KC_UP, KC_RGHT, KC_SCLN, KC_QUOT, _______, _______, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, _______, _______, KC_HOME, KC_PGDN, KC_PGUP, KC_END, KC_F11, KC_F12, - _______, _______, _______, _______, SP_ADJ, _______, _______, _______,_______, _______, _______, KC_DOWN, KC_UP, - _______, _______, _______, _______ + _______, _______, _______, _______, SP_ADJ, _______, _______, _______,_______, _______, _______, KC_DOWN, KC_UP ), [_ADJUST] = LAYOUT( _______, RGB_HUI, RGB_SAI, RGB_VAI, _______, _______, _______, _______, _______, _______, _______, _______, KC_PSCR, KC_SCRL, KC_PAUS, _______, _______, _______, _______, _______, _______, _______, _______, RGB_HUI, RGB_SAI, RGB_VAI, _______, RGB_RMOD, _______, _______, AU_TOGG, CK_TOGG, MU_TOGG, MU_NEXT, _______, _______, _______, RGB_HUD, RGB_SAD, RGB_VAD, RGB_TOG, RGB_MOD, _______, KC_CAPS, KC_CAPS, CK_RST, CK_DOWN, CK_UP, AU_PREV, AU_NEXT, _______, _______, _______, _______, _______, _______, _______, _______, - _______, _______, _______, _______, _______, _______, _______, _______,_______, _______, _______, _______, _______, - _______, _______, _______, _______ + _______, _______, _______, _______, _______, _______, _______, _______,_______, _______, _______, _______, _______ ) }; diff --git a/keyboards/jones/v1/keymaps/via/config.h b/keyboards/jones/v1/keymaps/via/config.h deleted file mode 100644 index a66ab80904..0000000000 --- a/keyboards/jones/v1/keymaps/via/config.h +++ /dev/null @@ -1,31 +0,0 @@ -/* -Copyright 2021 Takeshi Nishio - -This program is free software: you can redistribute it and/or modify -it under the terms of the GNU General Public License as published by -the Free Software Foundation, either version 2 of the License, or -(at your option) any later version. - -This program is distributed in the hope that it will be useful, -but WITHOUT ANY WARRANTY; without even the implied warranty of -MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -GNU General Public License for more details. - -You should have received a copy of the GNU General Public License -along with this program. If not, see <http://www.gnu.org/licenses/>. -*/ - -#pragma once - -//------------------------------------------------------------------------------ -// Rotary Encoder -//------------------------------------------------------------------------------ -// Encoder triggers specific key matrix position, -// when turn knob clockwise or counterclockwise. -// This is handy to assign key codes by VIA. - -// Mappings of encoder rotation to key position in key matrix. -// First encoder, Left side : k85, k86 -// Second encoder, Right side : k95, k96 -#define ENCODERS_CW_KEY { { 6, 8 }, { 6, 9 } } -#define ENCODERS_CCW_KEY { { 5, 8 }, { 5, 9 } } diff --git a/keyboards/jones/v1/keymaps/via/keymap.c b/keyboards/jones/v1/keymaps/via/keymap.c index 3b41c40174..3f9b9faa86 100644 --- a/keyboards/jones/v1/keymaps/via/keymap.c +++ b/keyboards/jones/v1/keymaps/via/keymap.c @@ -37,48 +37,42 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { KC_TAB, JP_Q, JP_W, JP_E, JP_R, JP_T, JP_AT, JP_LBRC, JP_Y, JP_U, JP_I, JP_O, JP_P, KC_BSPC, KC_LCTL, JP_A, JP_S, JP_D, JP_F, JP_G, JP_COLN, JP_RBRC, JP_H, JP_J, JP_K, JP_L, JP_SCLN, KC_ENT, KC_LSFT, KC_LSFT, JP_Z, JP_X, JP_C, JP_V, JP_B, JP_SLSH, JP_BSLS, JP_N, JP_M, JP_COMM, JP_DOT, KC_DOWN, KC_UP, - KC_MUTE, KC_LGUI, KC_LALT, JP_MHEN, SP_LOW, SP_RAI, KC_BSPC, SP_RAI,SP_RAI, JP_HENK, JP_KANA, KC_LEFT, KC_RGHT, - KC_VOLD, KC_VOLU, KC_VOLD, KC_VOLU + KC_MUTE, KC_LGUI, KC_LALT, JP_MHEN, SP_LOW, SP_RAI, KC_BSPC, SP_RAI,SP_RAI, JP_HENK, JP_KANA, KC_LEFT, KC_RGHT ), [_BASE2] = LAYOUT( _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_PSLS, KC_PAST, KC_PMNS, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_P7, KC_P8, KC_P9, KC_PPLS, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_P4, KC_P5, KC_P6, KC_PPLS, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_P1, KC_P2, KC_P3, _______, _______, - _______, _______, _______, _______, _______, _______, _______, _______,_______, KC_P0, KC_PDOT, _______, _______, - _______, _______, _______, _______ + _______, _______, _______, _______, _______, _______, _______, _______,_______, KC_P0, KC_PDOT, _______, _______ ), [_BASE3] = LAYOUT( _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, - _______, _______, _______, _______, _______, _______, _______, _______,_______, _______, _______, _______, _______, - _______, _______, _______, _______ + _______, _______, _______, _______, _______, _______, _______, _______,_______, _______, _______, _______, _______ ), [_LOWER] = LAYOUT( _______, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, _______, _______, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, _______, JP_EXLM, JP_DQUO, JP_HASH, JP_DLR, JP_PERC, JP_TILD, JP_PIPE, JP_AMPR, JP_QUOT, JP_LPRN, JP_RPRN, JP_EQL, KC_INS, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_MUTE, KC_VOLD, KC_VOLU, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, - _______, _______, _______, _______, _______, SP_ADJ, _______, SP_ADJ,SP_ADJ, _______, _______, _______, _______, - _______, _______, _______, _______ + _______, _______, _______, _______, _______, SP_ADJ, _______, SP_ADJ,SP_ADJ, _______, _______, _______, _______ ), [_RAISE] = LAYOUT( KC_GRV, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, _______, _______, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_ESC, JP_1, JP_2, JP_3, JP_4, JP_5, JP_CIRC, JP_YEN, JP_6, JP_7, JP_8, JP_9, JP_0, KC_DEL, _______, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, _______, _______, KC_LEFT, KC_DOWN, KC_UP, KC_RGHT, _______, _______, _______, _______, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_HOME, KC_PGDN, KC_PGUP, KC_END, _______, _______, - _______, _______, _______, _______, SP_ADJ, _______, _______, _______,_______, _______, _______, KC_DOWN, KC_UP, - _______, _______, _______, _______ + _______, _______, _______, _______, SP_ADJ, _______, _______, _______,_______, _______, _______, KC_DOWN, KC_UP ), [_ADJUST] = LAYOUT( _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_PSCR, KC_SCRL, KC_PAUS, _______, DF(_BASE1),DF(_BASE2),DF(_BASE3),_______, _______, _______, _______, RGB_HUI, RGB_SAI, RGB_VAI, _______, RGB_RMOD, _______, _______, AU_TOGG, CK_TOGG, MU_TOGG, MU_NEXT, _______, _______, _______, RGB_HUD, RGB_SAD, RGB_VAD, RGB_TOG, RGB_MOD, _______, KC_CAPS, KC_CAPS, CK_RST, CK_DOWN, CK_UP, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, - _______, _______, _______, _______, _______, _______, _______, _______,_______, _______, _______, _______, _______, - _______, _______, _______, _______ + _______, _______, _______, _______, _______, _______, _______, _______,_______, _______, _______, _______, _______ ), }; @@ -164,50 +158,16 @@ bool led_update_user(led_t led_state) { } #endif - -//------------------------------------------------------------------------------ -// Rotary Encoder -//------------------------------------------------------------------------------ -static uint8_t encoder_state[NUM_ENCODERS] = {0}; -static keypos_t encoder_cw[NUM_ENCODERS] = ENCODERS_CW_KEY; -static keypos_t encoder_ccw[NUM_ENCODERS] = ENCODERS_CCW_KEY; - -void encoder_action_unregister(void) { - for (int index = 0; index < NUM_ENCODERS; ++index) { - if (encoder_state[index]) { - keyevent_t encoder_event = (keyevent_t) { - .key = encoder_state[index] >> 1 ? encoder_cw[index] : encoder_ccw[index], - .pressed = false, - .time = timer_read(), - .type = KEY_EVENT - }; - encoder_state[index] = 0; - action_exec(encoder_event); - } - } -} - -void encoder_action_register(uint8_t index, bool clockwise) { - keyevent_t encoder_event = (keyevent_t) { - .key = clockwise ? encoder_cw[index] : encoder_ccw[index], - .pressed = true, - .time = timer_read(), - .type = KEY_EVENT - }; - encoder_state[index] = (clockwise ^ 1) | (clockwise << 1); - action_exec(encoder_event); -} - -void matrix_scan_kb(void) { - encoder_action_unregister(); - matrix_scan_user(); -} - -bool encoder_update_user(uint8_t index, bool clockwise) { - encoder_action_register(index, clockwise); - return true; +#ifdef ENCODER_MAP_ENABLE +const uint16_t PROGMEM encoder_map[][NUM_ENCODERS][NUM_DIRECTIONS] = { + [0] = { ENCODER_CCW_CW(KC_VOLD, KC_VOLU) }, + [1] = { ENCODER_CCW_CW(_______, _______) }, + [2] = { ENCODER_CCW_CW(_______, _______) }, + [3] = { ENCODER_CCW_CW(_______, _______) }, + [4] = { ENCODER_CCW_CW(_______, _______) }, + [5] = { ENCODER_CCW_CW(_______, _______) }, }; - +#endif //------------------------------------------------------------------------------ // Keyboard Initialization diff --git a/keyboards/jones/v1/keymaps/via/rules.mk b/keyboards/jones/v1/keymaps/via/rules.mk index e1d2dc0582..8dd8cb0c15 100644 --- a/keyboards/jones/v1/keymaps/via/rules.mk +++ b/keyboards/jones/v1/keymaps/via/rules.mk @@ -1,2 +1,3 @@ -# Use VIA VIA_ENABLE = yes +ENCODER_MAP_ENABLE = yes +AUDIO_ENABLE = no diff --git a/keyboards/jorne/rev1/config.h b/keyboards/jorne/rev1/config.h index 73e2d8219b..623aaf149c 100644 --- a/keyboards/jorne/rev1/config.h +++ b/keyboards/jorne/rev1/config.h @@ -2,9 +2,6 @@ // SPDX-License-Identifier: GPL-2.0-or-later #pragma once -#define RGBLED_SPLIT { 28, 28 } -#define RGBLED_NUM 56 - /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ #define LOCKING_SUPPORT_ENABLE /* Locking resynchronize hack */ diff --git a/keyboards/jorne/rev1/info.json b/keyboards/jorne/rev1/info.json index f07f99e4a6..1b1f156fa5 100644 --- a/keyboards/jorne/rev1/info.json +++ b/keyboards/jorne/rev1/info.json @@ -16,6 +16,10 @@ "split": { "soft_serial_pin": "D2" }, + "rgblight": { + "led_count": 56, + "split_count": [28, 28] + }, "ws2812": { "pin": "D3" }, diff --git a/keyboards/junco/info.json b/keyboards/junco/info.json index 9fd699ca49..3762433765 100644 --- a/keyboards/junco/info.json +++ b/keyboards/junco/info.json @@ -8,6 +8,11 @@ "pid": "0x4A13", "device_version": "1.0.0" }, + "matrix_pins": { + "cols": ["GP2", "GP3", "GP4", "GP5", "GP6", "GP7"], + "rows": ["GP8", "GP9", "GP10", "GP11", "GP12"] + }, + "diode_direction": "COL2ROW", "ws2812": { "pin": "GP15", "driver": "vendor" @@ -15,6 +20,22 @@ "rgb_matrix": { "driver": "WS2812" }, + "encoder": { + "rotary": [ + {"pin_a": "GP16", "pin_b": "GP17"}, + {"pin_a": "GP14", "pin_b": "GP13"} + ] + }, + "split": { + "encoder": { + "right": { + "rotary": [ + {"pin_a": "GP14", "pin_b": "GP13"}, + {"pin_a": "GP16", "pin_b": "GP17"} + ] + } + } + }, "processor": "RP2040", "bootloader": "rp2040", "layouts": { diff --git a/keyboards/junco/rev1/config.h b/keyboards/junco/rev1/config.h index 95731fde01..713d651d47 100644 --- a/keyboards/junco/rev1/config.h +++ b/keyboards/junco/rev1/config.h @@ -3,13 +3,6 @@ #pragma once -// Electrical Wiring Stuff -#define MATRIX_ROW_PINS \ - { GP8, GP9, GP10, GP11, GP12 } -#define MATRIX_COL_PINS \ - { GP2, GP3, GP4, GP5, GP6, GP7 } -#define DIODE_DIRECTION COL2ROW - // Split Keyboard Stuff #define EE_HANDS // Sets the keyboard’s handedness using EEPROM #define SERIAL_USART_FULL_DUPLEX // Use full duplex communication (TRRS) @@ -24,19 +17,3 @@ { 37, 37 } // 37 LEDs on each side #endif - -/* Rotary Encoders Definition */ -// Indexing goes from physical leftmost to rightmost -// 0: left-half left | 1: left-half right | 2: right-half left | 3: right-half right -#ifdef ENCODER_ENABLE - -# define ENCODERS_PAD_A \ - { GP16, GP14 } -# define ENCODERS_PAD_B \ - { GP17, GP13 } -# define ENCODERS_PAD_A_RIGHT \ - { GP14, GP16 } -# define ENCODERS_PAD_B_RIGHT \ - { GP13, GP17 } - -#endif diff --git a/keyboards/kabedon/kabedon78s/config.h b/keyboards/kabedon/kabedon78s/config.h index 57f829e692..05d2733f8b 100644 --- a/keyboards/kabedon/kabedon78s/config.h +++ b/keyboards/kabedon/kabedon78s/config.h @@ -17,10 +17,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #pragma once - #define RGBLED_NUM 20 - #define RGBLIGHT_HUE_STEP 8 - #define RGBLIGHT_SAT_STEP 8 - #define RGBLIGHT_VAL_STEP 8 #define RGBLIGHT_EFFECT_BREATHING #define RGBLIGHT_EFFECT_RAINBOW_MOOD #define RGBLIGHT_EFFECT_RAINBOW_SWIRL diff --git a/keyboards/kabedon/kabedon78s/info.json b/keyboards/kabedon/kabedon78s/info.json index 8ec6b52705..02505c3676 100644 --- a/keyboards/kabedon/kabedon78s/info.json +++ b/keyboards/kabedon/kabedon78s/info.json @@ -8,6 +8,11 @@ "pid": "0x3738", "device_version": "0.0.1" }, + "rgblight": { + "saturation_steps": 8, + "brightness_steps": 8, + "led_count": 20 + }, "ws2812": { "pin": "B7" }, diff --git a/keyboards/kabedon/kabedon980/config.h b/keyboards/kabedon/kabedon980/config.h index 655a8af4a9..1592030f81 100644 --- a/keyboards/kabedon/kabedon980/config.h +++ b/keyboards/kabedon/kabedon980/config.h @@ -19,10 +19,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #define DYNAMIC_KEYMAP_LAYER_COUNT 3 - #define RGBLED_NUM 20 - #define RGBLIGHT_HUE_STEP 8 - #define RGBLIGHT_SAT_STEP 8 - #define RGBLIGHT_VAL_STEP 8 #define RGBLIGHT_EFFECT_BREATHING #define RGBLIGHT_EFFECT_RAINBOW_MOOD #define RGBLIGHT_EFFECT_RAINBOW_SWIRL diff --git a/keyboards/kabedon/kabedon980/info.json b/keyboards/kabedon/kabedon980/info.json index 95781f0581..15ae8ab876 100644 --- a/keyboards/kabedon/kabedon980/info.json +++ b/keyboards/kabedon/kabedon980/info.json @@ -8,6 +8,11 @@ "pid": "0x3938", "device_version": "0.0.1" }, + "rgblight": { + "saturation_steps": 8, + "brightness_steps": 8, + "led_count": 20 + }, "ws2812": { "pin": "B7" }, diff --git a/keyboards/kabedon/kabedon98e/config.h b/keyboards/kabedon/kabedon98e/config.h index c8ae65099b..28963e1935 100644 --- a/keyboards/kabedon/kabedon98e/config.h +++ b/keyboards/kabedon/kabedon98e/config.h @@ -15,7 +15,6 @@ */ #pragma once -#define RGBLED_NUM 24 #define RGBLIGHT_EFFECT_BREATHING #define RGBLIGHT_EFFECT_RAINBOW_MOOD #define RGBLIGHT_EFFECT_RAINBOW_SWIRL @@ -37,7 +36,4 @@ /* Locking resynchronize hack */ #define LOCKING_RESYNC_ENABLE -#define ENCODERS_CW_KEY { { 0, 0 },{ 2, 0 } } -#define ENCODERS_CCW_KEY { { 6, 0 },{ 8, 0 } } - #define DYNAMIC_KEYMAP_LAYER_COUNT 3 diff --git a/keyboards/kabedon/kabedon98e/info.json b/keyboards/kabedon/kabedon98e/info.json index cbe83c98ee..40888d8292 100644 --- a/keyboards/kabedon/kabedon98e/info.json +++ b/keyboards/kabedon/kabedon98e/info.json @@ -9,6 +9,9 @@ "device_version": "0.0.2", "force_nkro": true }, + "rgblight": { + "led_count": 24 + }, "ws2812": { "pin": "B4", "driver": "pwm" @@ -50,13 +53,9 @@ {"matrix": [1, 7], "x": 14, "y": 0.5}, {"matrix": [5, 7], "x": 15.5, "y": 0.5}, - {"matrix": [0, 0], "x": 16.9, "y": 0, "w": 0.6, "h": 0.5}, {"matrix": [4, 8], "x": 17, "y": 0.5}, - {"matrix": [2, 0], "x": 17.5, "y": 0, "w": 0.6, "h": 0.5}, - {"matrix": [6, 0], "x": 18.4, "y": 0, "w": 0.6, "h": 0.5}, {"matrix": [4, 0], "x": 18.5, "y": 0.5}, - {"matrix": [8, 0], "x": 19, "y": 0, "w": 0.6, "h": 0.5}, {"matrix": [3, 0], "x": 0, "y": 1.75}, {"matrix": [2, 1], "x": 1, "y": 1.75}, diff --git a/keyboards/kabedon/kabedon98e/kabedon98e.c b/keyboards/kabedon/kabedon98e/kabedon98e.c deleted file mode 100644 index 9fd34b58af..0000000000 --- a/keyboards/kabedon/kabedon98e/kabedon98e.c +++ /dev/null @@ -1,57 +0,0 @@ -/* Copyright 2021 KDon<370490639@qq.com> - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see <http://www.gnu.org/licenses/>. - */ -#include "quantum.h" - -static uint8_t encoder_state[NUM_ENCODERS] = {0}; -static keypos_t encoder_cw[NUM_ENCODERS] = ENCODERS_CW_KEY; -static keypos_t encoder_ccw[NUM_ENCODERS] = ENCODERS_CCW_KEY; - -void encoder_action_unregister(void) { - for (int index = 0; index < NUM_ENCODERS; ++index) { - if (encoder_state[index]) { - keyevent_t encoder_event = (keyevent_t) { - .key = encoder_state[index] >> 1 ? encoder_cw[index] : encoder_ccw[index], - .pressed = false, - .time = timer_read(), - .type = KEY_EVENT - }; - encoder_state[index] = 0; - action_exec(encoder_event); - } - } -} - -void encoder_action_register(uint8_t index, bool clockwise) { - keyevent_t encoder_event = (keyevent_t) { - .key = clockwise ? encoder_cw[index] : encoder_ccw[index], - .pressed = true, - .time = timer_read(), - .type = KEY_EVENT - }; - encoder_state[index] = (clockwise ^ 1) | (clockwise << 1); - action_exec(encoder_event); -} - -void matrix_scan_kb(void) { - encoder_action_unregister(); - matrix_scan_user(); -} - -bool encoder_update_kb(uint8_t index, bool clockwise) { - if (!encoder_update_user(index, clockwise)) { return false; } - encoder_action_register(index, clockwise); - return true; -}; diff --git a/keyboards/kabedon/kabedon98e/keymaps/default/keymap.c b/keyboards/kabedon/kabedon98e/keymaps/default/keymap.c index f730ee95b2..3dcdbf8377 100644 --- a/keyboards/kabedon/kabedon98e/keymaps/default/keymap.c +++ b/keyboards/kabedon/kabedon98e/keymaps/default/keymap.c @@ -45,7 +45,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { └──┘└──┘└──┘ */ [_BASE] = LAYOUT( - KC_ESC, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_DEL, KC_HOME, KC_INS, KC_END, KC_PGUP, KC_MUTE, KC_PGDN, + KC_ESC, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_DEL, KC_INS, KC_MUTE, KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_NUM, KC_PSLS, KC_PAST, KC_PMNS, KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_P7, KC_P8, KC_P9, KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, KC_P4, KC_P5, KC_P6, KC_PPLS, @@ -53,19 +53,17 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { KC_LCTL, KC_LGUI, KC_LALT, MO(1), KC_SPC, KC_RALT, KC_RCTL, KC_LEFT, KC_DOWN, KC_RGHT, KC_P0, KC_PDOT, KC_PENT), [_FN] = LAYOUT( - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, RGB_VAI, KC_TRNS, KC_TRNS, KC_TRNS, - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, RGB_TOG, RGB_MOD, RGB_HUI, RGB_VAD, RGB_HUD, KC_TRNS, KC_TRNS, KC_TRNS), - -[_FN1] = LAYOUT( - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS) + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, RGB_TOG, RGB_MOD, RGB_HUI, RGB_VAD, RGB_HUD, KC_TRNS, KC_TRNS, KC_TRNS) +}; +#ifdef ENCODER_MAP_ENABLE +const uint16_t PROGMEM encoder_map[][NUM_ENCODERS][NUM_DIRECTIONS] = { + [0] = { ENCODER_CCW_CW(KC_VOLD, KC_VOLU), ENCODER_CCW_CW(KC_VOLD, KC_VOLU) }, + [1] = { ENCODER_CCW_CW(_______, _______), ENCODER_CCW_CW(_______, _______) }, }; +#endif diff --git a/keyboards/kabedon/kabedon98e/keymaps/default/rules.mk b/keyboards/kabedon/kabedon98e/keymaps/default/rules.mk new file mode 100644 index 0000000000..ee32568148 --- /dev/null +++ b/keyboards/kabedon/kabedon98e/keymaps/default/rules.mk @@ -0,0 +1 @@ +ENCODER_MAP_ENABLE = yes diff --git a/keyboards/kabedon/kabedon98e/keymaps/via/keymap.c b/keyboards/kabedon/kabedon98e/keymaps/via/keymap.c index f730ee95b2..6cb85164c0 100644 --- a/keyboards/kabedon/kabedon98e/keymaps/via/keymap.c +++ b/keyboards/kabedon/kabedon98e/keymaps/via/keymap.c @@ -45,7 +45,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { └──┘└──┘└──┘ */ [_BASE] = LAYOUT( - KC_ESC, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_DEL, KC_HOME, KC_INS, KC_END, KC_PGUP, KC_MUTE, KC_PGDN, + KC_ESC, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_DEL, KC_INS, KC_MUTE, KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_NUM, KC_PSLS, KC_PAST, KC_PMNS, KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_P7, KC_P8, KC_P9, KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, KC_P4, KC_P5, KC_P6, KC_PPLS, @@ -53,7 +53,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { KC_LCTL, KC_LGUI, KC_LALT, MO(1), KC_SPC, KC_RALT, KC_RCTL, KC_LEFT, KC_DOWN, KC_RGHT, KC_P0, KC_PDOT, KC_PENT), [_FN] = LAYOUT( - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, @@ -61,7 +61,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, RGB_TOG, RGB_MOD, RGB_HUI, RGB_VAD, RGB_HUD, KC_TRNS, KC_TRNS, KC_TRNS), [_FN1] = LAYOUT( - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, @@ -69,3 +69,11 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS) }; + +#ifdef ENCODER_MAP_ENABLE +const uint16_t PROGMEM encoder_map[][NUM_ENCODERS][NUM_DIRECTIONS] = { + [0] = { ENCODER_CCW_CW(KC_VOLD, KC_VOLU), ENCODER_CCW_CW(KC_VOLD, KC_VOLU) }, + [1] = { ENCODER_CCW_CW(_______, _______), ENCODER_CCW_CW(_______, _______) }, + [2] = { ENCODER_CCW_CW(_______, _______), ENCODER_CCW_CW(_______, _______) }, +}; +#endif diff --git a/keyboards/kabedon/kabedon98e/keymaps/via/rules.mk b/keyboards/kabedon/kabedon98e/keymaps/via/rules.mk index 1e5b99807c..f1adcab005 100644 --- a/keyboards/kabedon/kabedon98e/keymaps/via/rules.mk +++ b/keyboards/kabedon/kabedon98e/keymaps/via/rules.mk @@ -1 +1,2 @@ VIA_ENABLE = yes +ENCODER_MAP_ENABLE = yes diff --git a/keyboards/kagizaraya/halberd/config.h b/keyboards/kagizaraya/halberd/config.h index 9b42731f84..4af8c12dc8 100644 --- a/keyboards/kagizaraya/halberd/config.h +++ b/keyboards/kagizaraya/halberd/config.h @@ -26,10 +26,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #define RGBLIGHT_EFFECT_RGB_TEST #define RGBLIGHT_EFFECT_ALTERNATING #define RGBLIGHT_EFFECT_TWINKLE -#define RGBLED_NUM 40 -#define RGBLIGHT_HUE_STEP 8 -#define RGBLIGHT_SAT_STEP 8 -#define RGBLIGHT_VAL_STEP 8 /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ #define LOCKING_SUPPORT_ENABLE @@ -51,5 +47,3 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. //#define NO_ACTION_LAYER //#define NO_ACTION_TAPPING //#define NO_ACTION_ONESHOT - -#define TAPPING_TERM 100 diff --git a/keyboards/kagizaraya/halberd/info.json b/keyboards/kagizaraya/halberd/info.json index 790db40f6d..de9b119e89 100644 --- a/keyboards/kagizaraya/halberd/info.json +++ b/keyboards/kagizaraya/halberd/info.json @@ -8,6 +8,14 @@ "pid": "0x0000", "device_version": "0.0.1" }, + "rgblight": { + "saturation_steps": 8, + "brightness_steps": 8, + "led_count": 40 + }, + "tapping": { + "term": 100 + }, "ws2812": { "pin": "F0" }, diff --git a/keyboards/kagizaraya/halberd/keymaps/right_modifiers/keymap.c b/keyboards/kagizaraya/halberd/keymaps/right_modifiers/keymap.c index d75b5b6079..a5c017336a 100644 --- a/keyboards/kagizaraya/halberd/keymaps/right_modifiers/keymap.c +++ b/keyboards/kagizaraya/halberd/keymaps/right_modifiers/keymap.c @@ -146,15 +146,3 @@ bool process_record_user(uint16_t keycode, keyrecord_t *record) { } return true; } - -void matrix_init_user(void) { - -} - -void matrix_scan_user(void) { - -} - -void led_set_user(uint8_t usb_led) { - -} diff --git a/keyboards/kagizaraya/scythe/config.h b/keyboards/kagizaraya/scythe/config.h index 96e9669046..d8ab9fc9f4 100644 --- a/keyboards/kagizaraya/scythe/config.h +++ b/keyboards/kagizaraya/scythe/config.h @@ -16,7 +16,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #pragma once -#define RGBLIGHT_SPLIT 1 #define RGBLIGHT_EFFECT_BREATHING #define RGBLIGHT_EFFECT_RAINBOW_MOOD #define RGBLIGHT_EFFECT_RAINBOW_SWIRL @@ -27,10 +26,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #define RGBLIGHT_EFFECT_RGB_TEST #define RGBLIGHT_EFFECT_ALTERNATING #define RGBLIGHT_EFFECT_TWINKLE -#define RGBLED_NUM 9 -#define RGBLIGHT_HUE_STEP 8 -#define RGBLIGHT_SAT_STEP 8 -#define RGBLIGHT_VAL_STEP 8 /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ #define LOCKING_SUPPORT_ENABLE @@ -57,5 +52,3 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. //#define EE_HANDS #define I2C_MASTER_LEFT //#define I2C_MASTER_RIGHT - -#define TAPPING_TERM 120 diff --git a/keyboards/kagizaraya/scythe/info.json b/keyboards/kagizaraya/scythe/info.json index 8198cd0017..5b95a776e3 100644 --- a/keyboards/kagizaraya/scythe/info.json +++ b/keyboards/kagizaraya/scythe/info.json @@ -19,6 +19,15 @@ "split": { "soft_serial_pin": "D0" }, + "rgblight": { + "saturation_steps": 8, + "brightness_steps": 8, + "led_count": 9, + "split": true + }, + "tapping": { + "term": 120 + }, "ws2812": { "pin": "F0" }, diff --git a/keyboards/kagizaraya/scythe/keymaps/forties/keymap.c b/keyboards/kagizaraya/scythe/keymaps/forties/keymap.c index 437be945bd..024bc9d952 100644 --- a/keyboards/kagizaraya/scythe/keymaps/forties/keymap.c +++ b/keyboards/kagizaraya/scythe/keymaps/forties/keymap.c @@ -191,15 +191,3 @@ bool process_record_user(uint16_t keycode, keyrecord_t *record) { } return true; } - -void matrix_init_user(void) { - -} - -void matrix_scan_user(void) { - -} - -void led_set_user(uint8_t usb_led) { - -} diff --git a/keyboards/kakunpc/angel17/rev1/config.h b/keyboards/kakunpc/angel17/rev1/config.h index 227e0d5294..f79d812475 100644 --- a/keyboards/kakunpc/angel17/rev1/config.h +++ b/keyboards/kakunpc/angel17/rev1/config.h @@ -17,12 +17,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #pragma once - #define RGBLED_NUM 17 - #define RGBLIGHT_HUE_STEP 8 - #define RGBLIGHT_SAT_STEP 8 - #define RGBLIGHT_VAL_STEP 8 - #define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */ - /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ #define LOCKING_SUPPORT_ENABLE /* Locking resynchronize hack */ diff --git a/keyboards/kakunpc/angel17/rev1/info.json b/keyboards/kakunpc/angel17/rev1/info.json index 9454cc5ffd..8395cf391c 100644 --- a/keyboards/kakunpc/angel17/rev1/info.json +++ b/keyboards/kakunpc/angel17/rev1/info.json @@ -3,6 +3,12 @@ "cols": ["F4", "F5", "F6", "F7", "B1"], "rows": ["D4", "C6", "D7", "E6"] }, + "rgblight": { + "saturation_steps": 8, + "brightness_steps": 8, + "led_count": 17, + "sleep": true + }, "ws2812": { "pin": "D3" }, diff --git a/keyboards/kakunpc/angel64/alpha/config.h b/keyboards/kakunpc/angel64/alpha/config.h index 4f068a9a7d..de3aadf442 100644 --- a/keyboards/kakunpc/angel64/alpha/config.h +++ b/keyboards/kakunpc/angel64/alpha/config.h @@ -29,11 +29,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #define MATRIX_ROW_PINS { D4, C6, D7, E6, B4, B5 } #define MATRIX_COL_PINS { F4, F5, F6, F7, B1, B3 } - #define RGBLED_NUM 64 - #define RGBLIGHT_HUE_STEP 8 - #define RGBLIGHT_SAT_STEP 8 - #define RGBLIGHT_VAL_STEP 8 - #define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */ #define RGBLIGHT_EFFECT_BREATHING #define RGBLIGHT_EFFECT_RAINBOW_MOOD #define RGBLIGHT_EFFECT_RAINBOW_SWIRL diff --git a/keyboards/kakunpc/angel64/alpha/info.json b/keyboards/kakunpc/angel64/alpha/info.json index 93748b736c..85fc0eee82 100644 --- a/keyboards/kakunpc/angel64/alpha/info.json +++ b/keyboards/kakunpc/angel64/alpha/info.json @@ -12,7 +12,11 @@ "pin": "D3" }, "rgblight": { - "max_brightness": 25 + "saturation_steps": 8, + "brightness_steps": 8, + "led_count": 64, + "max_brightness": 25, + "sleep": true }, "processor": "atmega32u4", "bootloader": "atmel-dfu", diff --git a/keyboards/kakunpc/angel64/rev1/config.h b/keyboards/kakunpc/angel64/rev1/config.h index 4f068a9a7d..de3aadf442 100644 --- a/keyboards/kakunpc/angel64/rev1/config.h +++ b/keyboards/kakunpc/angel64/rev1/config.h @@ -29,11 +29,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #define MATRIX_ROW_PINS { D4, C6, D7, E6, B4, B5 } #define MATRIX_COL_PINS { F4, F5, F6, F7, B1, B3 } - #define RGBLED_NUM 64 - #define RGBLIGHT_HUE_STEP 8 - #define RGBLIGHT_SAT_STEP 8 - #define RGBLIGHT_VAL_STEP 8 - #define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */ #define RGBLIGHT_EFFECT_BREATHING #define RGBLIGHT_EFFECT_RAINBOW_MOOD #define RGBLIGHT_EFFECT_RAINBOW_SWIRL diff --git a/keyboards/kakunpc/angel64/rev1/info.json b/keyboards/kakunpc/angel64/rev1/info.json index 59e7152e0d..8e97d0a653 100644 --- a/keyboards/kakunpc/angel64/rev1/info.json +++ b/keyboards/kakunpc/angel64/rev1/info.json @@ -12,7 +12,11 @@ "pin": "D3" }, "rgblight": { - "max_brightness": 25 + "saturation_steps": 8, + "brightness_steps": 8, + "led_count": 64, + "max_brightness": 25, + "sleep": true }, "processor": "atmega32u4", "bootloader": "atmel-dfu", diff --git a/keyboards/kakunpc/business_card/alpha/config.h b/keyboards/kakunpc/business_card/alpha/config.h index ebe746b7ce..f79d812475 100644 --- a/keyboards/kakunpc/business_card/alpha/config.h +++ b/keyboards/kakunpc/business_card/alpha/config.h @@ -17,12 +17,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #pragma once - #define RGBLED_NUM 6 - #define RGBLIGHT_HUE_STEP 8 - #define RGBLIGHT_SAT_STEP 8 - #define RGBLIGHT_VAL_STEP 8 - #define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */ - /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ #define LOCKING_SUPPORT_ENABLE /* Locking resynchronize hack */ diff --git a/keyboards/kakunpc/business_card/alpha/info.json b/keyboards/kakunpc/business_card/alpha/info.json index 17fda49030..3270f8e4bc 100644 --- a/keyboards/kakunpc/business_card/alpha/info.json +++ b/keyboards/kakunpc/business_card/alpha/info.json @@ -8,6 +8,12 @@ "pid": "0x0000", "device_version": "0.0.1" }, + "rgblight": { + "saturation_steps": 8, + "brightness_steps": 8, + "led_count": 6, + "sleep": true + }, "ws2812": { "pin": "D3" }, diff --git a/keyboards/kakunpc/business_card/beta/config.h b/keyboards/kakunpc/business_card/beta/config.h index ebe746b7ce..f79d812475 100644 --- a/keyboards/kakunpc/business_card/beta/config.h +++ b/keyboards/kakunpc/business_card/beta/config.h @@ -17,12 +17,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #pragma once - #define RGBLED_NUM 6 - #define RGBLIGHT_HUE_STEP 8 - #define RGBLIGHT_SAT_STEP 8 - #define RGBLIGHT_VAL_STEP 8 - #define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */ - /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ #define LOCKING_SUPPORT_ENABLE /* Locking resynchronize hack */ diff --git a/keyboards/kakunpc/business_card/beta/info.json b/keyboards/kakunpc/business_card/beta/info.json index 9886b2aa6c..ef09a0ac90 100644 --- a/keyboards/kakunpc/business_card/beta/info.json +++ b/keyboards/kakunpc/business_card/beta/info.json @@ -8,6 +8,12 @@ "pid": "0x0000", "device_version": "0.0.1" }, + "rgblight": { + "saturation_steps": 8, + "brightness_steps": 8, + "led_count": 6, + "sleep": true + }, "ws2812": { "pin": "D3" }, diff --git a/keyboards/kakunpc/rabbit_capture_plan/config.h b/keyboards/kakunpc/rabbit_capture_plan/config.h index 6a6c2678bf..54425daf6f 100644 --- a/keyboards/kakunpc/rabbit_capture_plan/config.h +++ b/keyboards/kakunpc/rabbit_capture_plan/config.h @@ -17,12 +17,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #pragma once -#define RGBLED_SPLIT {32, 37} -# define RGBLED_NUM 69 -# define RGBLIGHT_HUE_STEP 8 -# define RGBLIGHT_SAT_STEP 8 -# define RGBLIGHT_VAL_STEP 8 -# define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */ #define RGBLIGHT_EFFECT_BREATHING #define RGBLIGHT_EFFECT_RAINBOW_MOOD #define RGBLIGHT_EFFECT_RAINBOW_SWIRL diff --git a/keyboards/kakunpc/rabbit_capture_plan/info.json b/keyboards/kakunpc/rabbit_capture_plan/info.json index d988e94034..c9e2675b9b 100644 --- a/keyboards/kakunpc/rabbit_capture_plan/info.json +++ b/keyboards/kakunpc/rabbit_capture_plan/info.json @@ -12,7 +12,12 @@ "pin": "D3" }, "rgblight": { - "max_brightness": 200 + "saturation_steps": 8, + "brightness_steps": 8, + "led_count": 69, + "max_brightness": 200, + "sleep": true, + "split_count": [32, 37] }, "matrix_pins": { "cols": ["F4", "F5", "F6", "F7", "B1", "B3", "B2", "B6"], diff --git a/keyboards/kakunpc/suihankey/alpha/config.h b/keyboards/kakunpc/suihankey/alpha/config.h index 2e4fa2625f..3e27bcd72f 100644 --- a/keyboards/kakunpc/suihankey/alpha/config.h +++ b/keyboards/kakunpc/suihankey/alpha/config.h @@ -17,11 +17,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #pragma once - #define RGBLED_NUM 18 - #define RGBLIGHT_HUE_STEP 8 - #define RGBLIGHT_SAT_STEP 8 - #define RGBLIGHT_VAL_STEP 8 - #define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */ #define RGBLIGHT_EFFECT_BREATHING #define RGBLIGHT_EFFECT_RAINBOW_MOOD #define RGBLIGHT_EFFECT_RAINBOW_SWIRL @@ -53,5 +48,3 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. //#define NO_ACTION_LAYER //#define NO_ACTION_TAPPING //#define NO_ACTION_ONESHOT - -// #define RGBLED_SPLIT {18,18} diff --git a/keyboards/kakunpc/suihankey/alpha/info.json b/keyboards/kakunpc/suihankey/alpha/info.json index b48aab8422..2abfb99e30 100644 --- a/keyboards/kakunpc/suihankey/alpha/info.json +++ b/keyboards/kakunpc/suihankey/alpha/info.json @@ -8,6 +8,12 @@ "pid": "0x0000", "device_version": "0.0.1" }, + "rgblight": { + "saturation_steps": 8, + "brightness_steps": 8, + "led_count": 18, + "sleep": true + }, "ws2812": { "pin": "D3" }, diff --git a/keyboards/kakunpc/suihankey/rev1/config.h b/keyboards/kakunpc/suihankey/rev1/config.h index 2e4fa2625f..3e27bcd72f 100644 --- a/keyboards/kakunpc/suihankey/rev1/config.h +++ b/keyboards/kakunpc/suihankey/rev1/config.h @@ -17,11 +17,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #pragma once - #define RGBLED_NUM 18 - #define RGBLIGHT_HUE_STEP 8 - #define RGBLIGHT_SAT_STEP 8 - #define RGBLIGHT_VAL_STEP 8 - #define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */ #define RGBLIGHT_EFFECT_BREATHING #define RGBLIGHT_EFFECT_RAINBOW_MOOD #define RGBLIGHT_EFFECT_RAINBOW_SWIRL @@ -53,5 +48,3 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. //#define NO_ACTION_LAYER //#define NO_ACTION_TAPPING //#define NO_ACTION_ONESHOT - -// #define RGBLED_SPLIT {18,18} diff --git a/keyboards/kakunpc/suihankey/rev1/info.json b/keyboards/kakunpc/suihankey/rev1/info.json index 4f5caa6c63..ee68e6a09a 100644 --- a/keyboards/kakunpc/suihankey/rev1/info.json +++ b/keyboards/kakunpc/suihankey/rev1/info.json @@ -8,6 +8,12 @@ "pid": "0x0000", "device_version": "0.0.1" }, + "rgblight": { + "saturation_steps": 8, + "brightness_steps": 8, + "led_count": 18, + "sleep": true + }, "ws2812": { "pin": "D3" }, diff --git a/keyboards/kakunpc/suihankey/split/alpha/config.h b/keyboards/kakunpc/suihankey/split/alpha/config.h index 1fda3473f3..a2f2264457 100644 --- a/keyboards/kakunpc/suihankey/split/alpha/config.h +++ b/keyboards/kakunpc/suihankey/split/alpha/config.h @@ -21,12 +21,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #define SPLIT_HAND_PIN D2 - #define RGBLED_NUM 18 - #define RGBLIGHT_HUE_STEP 8 - #define RGBLIGHT_SAT_STEP 8 - #define RGBLIGHT_VAL_STEP 8 - #define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */ - /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ #define LOCKING_SUPPORT_ENABLE /* Locking resynchronize hack */ @@ -47,5 +41,3 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. //#define NO_ACTION_LAYER //#define NO_ACTION_TAPPING //#define NO_ACTION_ONESHOT - -// #define RGBLED_SPLIT {18,18} diff --git a/keyboards/kakunpc/suihankey/split/alpha/info.json b/keyboards/kakunpc/suihankey/split/alpha/info.json index 72aaf72967..fb7a619d0e 100644 --- a/keyboards/kakunpc/suihankey/split/alpha/info.json +++ b/keyboards/kakunpc/suihankey/split/alpha/info.json @@ -1,4 +1,10 @@ { + "rgblight": { + "saturation_steps": 8, + "brightness_steps": 8, + "led_count": 18, + "sleep": true + }, "ws2812": { "pin": "D3" }, diff --git a/keyboards/kakunpc/suihankey/split/rev1/config.h b/keyboards/kakunpc/suihankey/split/rev1/config.h index 86e33438b5..d5bf894d2f 100644 --- a/keyboards/kakunpc/suihankey/split/rev1/config.h +++ b/keyboards/kakunpc/suihankey/split/rev1/config.h @@ -21,11 +21,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #define SPLIT_HAND_PIN D2 - #define RGBLED_NUM 18 - #define RGBLIGHT_HUE_STEP 8 - #define RGBLIGHT_SAT_STEP 8 - #define RGBLIGHT_VAL_STEP 8 - #define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */ #define RGBLIGHT_EFFECT_BREATHING #define RGBLIGHT_EFFECT_RAINBOW_MOOD #define RGBLIGHT_EFFECT_RAINBOW_SWIRL @@ -57,5 +52,3 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. //#define NO_ACTION_LAYER //#define NO_ACTION_TAPPING //#define NO_ACTION_ONESHOT - -// #define RGBLED_SPLIT {18,18} diff --git a/keyboards/kakunpc/suihankey/split/rev1/info.json b/keyboards/kakunpc/suihankey/split/rev1/info.json index 2c414b3116..4dbde5c4a6 100644 --- a/keyboards/kakunpc/suihankey/split/rev1/info.json +++ b/keyboards/kakunpc/suihankey/split/rev1/info.json @@ -1,4 +1,10 @@ { + "rgblight": { + "saturation_steps": 8, + "brightness_steps": 8, + "led_count": 18, + "sleep": true + }, "ws2812": { "pin": "D3" }, diff --git a/keyboards/kakunpc/thedogkeyboard/config.h b/keyboards/kakunpc/thedogkeyboard/config.h index 80e1c06014..30b7b606c0 100644 --- a/keyboards/kakunpc/thedogkeyboard/config.h +++ b/keyboards/kakunpc/thedogkeyboard/config.h @@ -35,12 +35,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #define MATRIX_ROW_PINS { F4, F5, F6, F7, B1, B3, B2, B6, B4, B5 } #define MATRIX_COL_PINS { D1, D0, D4, C6, D7, E6 } - #define RGBLED_NUM 111 - #define RGBLIGHT_HUE_STEP 8 - #define RGBLIGHT_SAT_STEP 8 - #define RGBLIGHT_VAL_STEP 8 - #define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */ - /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ #define LOCKING_SUPPORT_ENABLE /* Locking resynchronize hack */ diff --git a/keyboards/kakunpc/thedogkeyboard/info.json b/keyboards/kakunpc/thedogkeyboard/info.json index a958fd52a6..79ed132f68 100644 --- a/keyboards/kakunpc/thedogkeyboard/info.json +++ b/keyboards/kakunpc/thedogkeyboard/info.json @@ -12,7 +12,11 @@ "pin": "D3" }, "rgblight": { - "max_brightness": 50 + "saturation_steps": 8, + "brightness_steps": 8, + "led_count": 111, + "max_brightness": 50, + "sleep": true }, "processor": "atmega32u4", "bootloader": "atmel-dfu", diff --git a/keyboards/kapcave/arya/config.h b/keyboards/kapcave/arya/config.h index 282b98a978..9422076315 100644 --- a/keyboards/kapcave/arya/config.h +++ b/keyboards/kapcave/arya/config.h @@ -22,8 +22,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. /* Locking resynchronize hack */ #define LOCKING_RESYNC_ENABLE -#define TAP_CODE_DELAY 25 - #define DYNAMIC_KEYMAP_LAYER_COUNT 3 /* diff --git a/keyboards/kapcave/arya/info.json b/keyboards/kapcave/arya/info.json index 0125b834fb..34246609e5 100644 --- a/keyboards/kapcave/arya/info.json +++ b/keyboards/kapcave/arya/info.json @@ -20,6 +20,9 @@ {"pin_a": "C15", "pin_b": "C14", "resolution": 2} ] }, + "qmk": { + "tap_keycode_delay": 25 + }, "processor": "STM32F072", "bootloader": "stm32-dfu", "community_layouts": ["alice_split_bs"], diff --git a/keyboards/kapcave/arya/rules.mk b/keyboards/kapcave/arya/rules.mk index bfdeb0e3ec..73bb6b769b 100644 --- a/keyboards/kapcave/arya/rules.mk +++ b/keyboards/kapcave/arya/rules.mk @@ -12,5 +12,3 @@ RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow AUDIO_ENABLE = no # Audio output ENCODER_ENABLE = yes -# Enter lower-power sleep mode when on the ChibiOS idle thread -OPT_DEFS += -DCORTEX_ENABLE_WFI_IDLE=TRUE diff --git a/keyboards/kapcave/gskt00/keymaps/nachie/keymap.c b/keyboards/kapcave/gskt00/keymaps/nachie/keymap.c index 105fd75a92..9b17187d05 100755 --- a/keyboards/kapcave/gskt00/keymaps/nachie/keymap.c +++ b/keyboards/kapcave/gskt00/keymaps/nachie/keymap.c @@ -35,48 +35,3 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, RGB_MOD, KC_TRNS, RGB_TOG) }; - -void matrix_init_user(void) { -} - -void matrix_scan_user(void) { -} - -bool process_record_user(uint16_t keycode, keyrecord_t *record) { - return true; -} - -void led_set_user(uint8_t usb_led) { - - if (usb_led & (1 << USB_LED_NUM_LOCK)) { - - } else { - - } - - if (usb_led & (1 << USB_LED_CAPS_LOCK)) { - - } else { - - } - - if (usb_led & (1 << USB_LED_SCROLL_LOCK)) { - - } else { - - } - - if (usb_led & (1 << USB_LED_COMPOSE)) { - - } else { - - } - - if (usb_led & (1 << USB_LED_KANA)) { - - } else { - - } - -} - diff --git a/keyboards/kapcave/paladinpad/rev1/config.h b/keyboards/kapcave/paladinpad/rev1/config.h index 386e4b0a0c..3f052b52b1 100644 --- a/keyboards/kapcave/paladinpad/rev1/config.h +++ b/keyboards/kapcave/paladinpad/rev1/config.h @@ -26,7 +26,3 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #define RGBLIGHT_EFFECT_RGB_TEST #define RGBLIGHT_EFFECT_ALTERNATING #define RGBLIGHT_EFFECT_TWINKLE -#define RGBLED_NUM 8 -#define RGBLIGHT_HUE_STEP 10 -#define RGBLIGHT_SAT_STEP 17 -#define RGBLIGHT_VAL_STEP 12 diff --git a/keyboards/kapcave/paladinpad/rev1/info.json b/keyboards/kapcave/paladinpad/rev1/info.json index 0fec9260a9..8acb87c517 100644 --- a/keyboards/kapcave/paladinpad/rev1/info.json +++ b/keyboards/kapcave/paladinpad/rev1/info.json @@ -2,6 +2,11 @@ "usb": { "device_version": "0.0.1" }, + "rgblight": { + "hue_steps": 10, + "brightness_steps": 12, + "led_count": 8 + }, "ws2812": { "pin": "D0" }, diff --git a/keyboards/kapcave/paladinpad/rev2/config.h b/keyboards/kapcave/paladinpad/rev2/config.h index 239a873384..1af48b400b 100644 --- a/keyboards/kapcave/paladinpad/rev2/config.h +++ b/keyboards/kapcave/paladinpad/rev2/config.h @@ -28,7 +28,3 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #define RGBLIGHT_EFFECT_RGB_TEST #define RGBLIGHT_EFFECT_ALTERNATING #define RGBLIGHT_EFFECT_TWINKLE -#define RGBLED_NUM 7 -#define RGBLIGHT_HUE_STEP 10 -#define RGBLIGHT_SAT_STEP 17 -#define RGBLIGHT_VAL_STEP 12 diff --git a/keyboards/kapcave/paladinpad/rev2/info.json b/keyboards/kapcave/paladinpad/rev2/info.json index 699cdde82d..fc101bec2e 100644 --- a/keyboards/kapcave/paladinpad/rev2/info.json +++ b/keyboards/kapcave/paladinpad/rev2/info.json @@ -2,6 +2,11 @@ "usb": { "device_version": "0.0.2" }, + "rgblight": { + "hue_steps": 10, + "brightness_steps": 12, + "led_count": 7 + }, "ws2812": { "pin": "D0" }, diff --git a/keyboards/kapl/rev1/config.h b/keyboards/kapl/rev1/config.h index 8dc6718d1a..19c039315c 100644 --- a/keyboards/kapl/rev1/config.h +++ b/keyboards/kapl/rev1/config.h @@ -5,19 +5,12 @@ /* Select hand configuration */ #define MASTER_LEFT -#define RGBLED_NUM 88 -#define RGBLED_SPLIT { 44, 44 } -#define RGBLIGHT_SPLIT - #define RGB_MATRIX_LED_COUNT 88 #define RGB_MATRIX_SPLIT { 44, 44 } #define RGB_MATRIX_MAXIMUM_BRIGHTNESS 120 // limits maximum brightness of LEDs to 150 out of 255. Higher may cause the controller to crash. #define SPLIT_TRANSPORT_MIRROR #ifdef RGBLIGHT_ENABLE -#define RGBLIGHT_HUE_STEP 8 -#define RGBLIGHT_SAT_STEP 16 -#define RGBLIGHT_VAL_STEP 16 #define RGBLIGHT_EFFECT_BREATHING #define RGBLIGHT_EFFECT_RAINBOW_MOOD #define RGBLIGHT_EFFECT_RAINBOW_SWIRL @@ -27,10 +20,6 @@ #endif #ifdef RGB_MATRIX_ENABLE -#define RGB_MATRIX_HUE_STEP 8 -#define RGB_MATRIX_SAT_STEP 16 -#define RGB_MATRIX_VAL_STEP 16 -#define RGB_MATRIX_SPD_STEP 10 // EFFECTS #define ENABLE_RGB_MATRIX_ALPHAS_MODS #define ENABLE_RGB_MATRIX_GRADIENT_UP_DOWN diff --git a/keyboards/kapl/rev1/info.json b/keyboards/kapl/rev1/info.json index ad310fa87c..07ab869a44 100644 --- a/keyboards/kapl/rev1/info.json +++ b/keyboards/kapl/rev1/info.json @@ -12,10 +12,15 @@ "pin": "D4" }, "rgb_matrix": { - "driver": "WS2812" + "driver": "WS2812", + "speed_steps": 10 }, "rgblight": { - "max_brightness": 120 + "saturation_steps": 16, + "brightness_steps": 16, + "led_count": 88, + "max_brightness": 120, + "split_count": [44, 44] }, "matrix_pins": { "cols": ["F5", "F6", "F7", "B1", "B3", "B2", "B6"], diff --git a/keyboards/kb_elmo/isolation/config.h b/keyboards/kb_elmo/isolation/config.h index 37a293fb19..bf815b7f53 100644 --- a/keyboards/kb_elmo/isolation/config.h +++ b/keyboards/kb_elmo/isolation/config.h @@ -18,11 +18,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #pragma once /* RGB backlight */ -# define RGBLED_NUM 3 -# define RGBLIGHT_HUE_STEP 8 -# define RGBLIGHT_SAT_STEP 8 -# define RGBLIGHT_VAL_STEP 8 -# define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */ # define RGBLIGHT_EFFECT_BREATHING # define RGBLIGHT_EFFECT_RAINBOW_MOOD # define RGBLIGHT_EFFECT_RAINBOW_SWIRL diff --git a/keyboards/kb_elmo/isolation/info.json b/keyboards/kb_elmo/isolation/info.json index 817a8db412..5f42e53988 100644 --- a/keyboards/kb_elmo/isolation/info.json +++ b/keyboards/kb_elmo/isolation/info.json @@ -8,6 +8,12 @@ "pid": "0x4EE6", "device_version": "0.0.1" }, + "rgblight": { + "saturation_steps": 8, + "brightness_steps": 8, + "led_count": 3, + "sleep": true + }, "ws2812": { "pin": "B2" }, diff --git a/keyboards/kb_elmo/noah_avr/config.h b/keyboards/kb_elmo/noah_avr/config.h index 08501c982b..387d189b26 100644 --- a/keyboards/kb_elmo/noah_avr/config.h +++ b/keyboards/kb_elmo/noah_avr/config.h @@ -28,6 +28,4 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #define RGBLIGHT_EFFECT_RGB_TEST #define RGBLIGHT_EFFECT_ALTERNATING #define RGBLIGHT_EFFECT_TWINKLE -#define RGBLED_NUM 7 -#define RGBLIGHT_SLEEP // RGB will turn off when PC is put to sleep #define WS2812_BYTE_ORDER WS2812_BYTE_ORDER_BGR // RGB on the Noah is different order diff --git a/keyboards/kb_elmo/noah_avr/info.json b/keyboards/kb_elmo/noah_avr/info.json index 8db5edb6b6..029b24cd63 100644 --- a/keyboards/kb_elmo/noah_avr/info.json +++ b/keyboards/kb_elmo/noah_avr/info.json @@ -8,6 +8,10 @@ "pid": "0x1DB0", "device_version": "0.0.1" }, + "rgblight": { + "led_count": 7, + "sleep": true + }, "ws2812": { "pin": "B5" }, diff --git a/keyboards/kbdcraft/adam64/rules.mk b/keyboards/kbdcraft/adam64/rules.mk index 094c6b058e..8b13789179 100644 --- a/keyboards/kbdcraft/adam64/rules.mk +++ b/keyboards/kbdcraft/adam64/rules.mk @@ -1,2 +1 @@ -# Enter lower-power sleep mode when on the ChibiOS idle thread -OPT_DEFS += -DCORTEX_ENABLE_WFI_IDLE=TRUE + diff --git a/keyboards/kbdfans/baguette66/rgb/config.h b/keyboards/kbdfans/baguette66/rgb/config.h index ee3574ac9c..78802b19f9 100644 --- a/keyboards/kbdfans/baguette66/rgb/config.h +++ b/keyboards/kbdfans/baguette66/rgb/config.h @@ -19,8 +19,7 @@ #define USB_SUSPEND_WAKEUP_DELAY 5000 #define VIA_EEPROM_LAYOUT_OPTIONS_SIZE 2 -#define RGBLED_NUM 66 -#define RGB_MATRIX_LED_COUNT RGBLED_NUM +#define RGB_MATRIX_LED_COUNT 66 #define RGBLIGHT_EFFECT_BREATHING #define RGBLIGHT_EFFECT_RAINBOW_MOOD #define RGBLIGHT_EFFECT_RAINBOW_SWIRL @@ -62,7 +61,3 @@ #define RGB_MATRIX_FRAMEBUFFER_EFFECTS #define RGB_MATRIX_MAXIMUM_BRIGHTNESS 150 // limits maximum brightness of LEDs to 150 out of 255. Higher may cause the controller to crash. #define RGB_MATRIX_DEFAULT_MODE RGB_MATRIX_CYCLE_ALL -#define RGB_MATRIX_HUE_STEP 8 -#define RGB_MATRIX_SAT_STEP 8 -#define RGB_MATRIX_VAL_STEP 8 -#define RGB_MATRIX_SPD_STEP 10 diff --git a/keyboards/kbdfans/baguette66/rgb/info.json b/keyboards/kbdfans/baguette66/rgb/info.json index 5f8faf89ae..9ac27f950a 100644 --- a/keyboards/kbdfans/baguette66/rgb/info.json +++ b/keyboards/kbdfans/baguette66/rgb/info.json @@ -7,11 +7,17 @@ "pid": "0x0106", "device_version": "0.0.1" }, + "rgblight": { + "led_count": 66 + }, "ws2812": { "pin": "E6" }, "rgb_matrix": { - "driver": "WS2812" + "driver": "WS2812", + "sat_steps": 8, + "val_steps": 8, + "speed_steps": 10 }, "matrix_pins": { "cols": ["C6", "C7", "F7", "F6", "B0", "B1", "B2", "B3", "D0", "D1", "D2", "D3", "D5", "D4", "D6"], diff --git a/keyboards/kbdfans/bounce/75/hotswap/config.h b/keyboards/kbdfans/bounce/75/hotswap/config.h index 29f510620b..4705c300f9 100644 --- a/keyboards/kbdfans/bounce/75/hotswap/config.h +++ b/keyboards/kbdfans/bounce/75/hotswap/config.h @@ -28,10 +28,5 @@ #define RGBLIGHT_EFFECT_TWINKLE #define RGBLIGHT_DEFAULT_MODE (RGBLIGHT_EFFECT_RAINBOW_MOOD +8 ) #define RGBLIGHT_DEFAULT_SPD 15 -#define RGBLED_NUM 4 -#define RGBLIGHT_HUE_STEP 10 -#define RGBLIGHT_SAT_STEP 10 -#define RGBLIGHT_VAL_STEP 10 -#define RGBLIGHT_SLEEP #define VIA_EEPROM_LAYOUT_OPTIONS_SIZE 2
\ No newline at end of file diff --git a/keyboards/kbdfans/bounce/75/hotswap/info.json b/keyboards/kbdfans/bounce/75/hotswap/info.json index 444a5addae..e715aab4c3 100644 --- a/keyboards/kbdfans/bounce/75/hotswap/info.json +++ b/keyboards/kbdfans/bounce/75/hotswap/info.json @@ -16,6 +16,13 @@ "caps_lock": "C6", "on_state": 0 }, + "rgblight": { + "hue_steps": 10, + "saturation_steps": 10, + "brightness_steps": 10, + "led_count": 4, + "sleep": true + }, "ws2812": { "pin": "F0" }, diff --git a/keyboards/kbdfans/bounce/75/soldered/config.h b/keyboards/kbdfans/bounce/75/soldered/config.h index 29f510620b..4705c300f9 100644 --- a/keyboards/kbdfans/bounce/75/soldered/config.h +++ b/keyboards/kbdfans/bounce/75/soldered/config.h @@ -28,10 +28,5 @@ #define RGBLIGHT_EFFECT_TWINKLE #define RGBLIGHT_DEFAULT_MODE (RGBLIGHT_EFFECT_RAINBOW_MOOD +8 ) #define RGBLIGHT_DEFAULT_SPD 15 -#define RGBLED_NUM 4 -#define RGBLIGHT_HUE_STEP 10 -#define RGBLIGHT_SAT_STEP 10 -#define RGBLIGHT_VAL_STEP 10 -#define RGBLIGHT_SLEEP #define VIA_EEPROM_LAYOUT_OPTIONS_SIZE 2
\ No newline at end of file diff --git a/keyboards/kbdfans/bounce/75/soldered/info.json b/keyboards/kbdfans/bounce/75/soldered/info.json index 9dbb3712ce..582c3d8c55 100644 --- a/keyboards/kbdfans/bounce/75/soldered/info.json +++ b/keyboards/kbdfans/bounce/75/soldered/info.json @@ -17,6 +17,13 @@ "caps_lock": "C6", "on_state": 0 }, + "rgblight": { + "hue_steps": 10, + "saturation_steps": 10, + "brightness_steps": 10, + "led_count": 4, + "sleep": true + }, "ws2812": { "pin": "B7" }, diff --git a/keyboards/kbdfans/kbd19x/config.h b/keyboards/kbdfans/kbd19x/config.h index b18438ab4e..4ef254c5af 100644 --- a/keyboards/kbdfans/kbd19x/config.h +++ b/keyboards/kbdfans/kbd19x/config.h @@ -27,11 +27,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #define RGBLIGHT_EFFECT_RGB_TEST #define RGBLIGHT_EFFECT_ALTERNATING #define RGBLIGHT_EFFECT_TWINKLE -#define RGBLED_NUM 18 -#define RGBLIGHT_HUE_STEP 8 -#define RGBLIGHT_SAT_STEP 8 -#define RGBLIGHT_VAL_STEP 8 -#define RGBLIGHT_SLEEP /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ #define LOCKING_SUPPORT_ENABLE diff --git a/keyboards/kbdfans/kbd19x/info.json b/keyboards/kbdfans/kbd19x/info.json index 3fb10600ee..ce716804f7 100644 --- a/keyboards/kbdfans/kbd19x/info.json +++ b/keyboards/kbdfans/kbd19x/info.json @@ -22,6 +22,12 @@ "scroll_lock": "B1", "on_state": 0 }, + "rgblight": { + "saturation_steps": 8, + "brightness_steps": 8, + "led_count": 18, + "sleep": true + }, "ws2812": { "pin": "E2" }, diff --git a/keyboards/kbdfans/kbd4x/config.h b/keyboards/kbdfans/kbd4x/config.h index d08ecf7f98..3fe83f1a3a 100644 --- a/keyboards/kbdfans/kbd4x/config.h +++ b/keyboards/kbdfans/kbd4x/config.h @@ -27,11 +27,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #define RGBLIGHT_EFFECT_RGB_TEST #define RGBLIGHT_EFFECT_ALTERNATING #define RGBLIGHT_EFFECT_TWINKLE -#define RGBLED_NUM 16 -#define RGBLIGHT_HUE_STEP 8 -#define RGBLIGHT_SAT_STEP 8 -#define RGBLIGHT_VAL_STEP 8 -#define RGBLIGHT_SLEEP /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ #define LOCKING_SUPPORT_ENABLE diff --git a/keyboards/kbdfans/kbd4x/info.json b/keyboards/kbdfans/kbd4x/info.json index 21d1428f0d..7040322fc3 100644 --- a/keyboards/kbdfans/kbd4x/info.json +++ b/keyboards/kbdfans/kbd4x/info.json @@ -17,6 +17,12 @@ "pin": "B6", "breathing": true }, + "rgblight": { + "saturation_steps": 8, + "brightness_steps": 8, + "led_count": 16, + "sleep": true + }, "ws2812": { "pin": "E2" }, diff --git a/keyboards/kbdfans/kbd67/hotswap/config.h b/keyboards/kbdfans/kbd67/hotswap/config.h index dfbc40e0a0..21548537d4 100644 --- a/keyboards/kbdfans/kbd67/hotswap/config.h +++ b/keyboards/kbdfans/kbd67/hotswap/config.h @@ -17,11 +17,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #pragma once - #define RGBLED_NUM 8 - #define RGBLIGHT_HUE_STEP 8 - #define RGBLIGHT_SAT_STEP 8 - #define RGBLIGHT_VAL_STEP 8 - // #define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */ // /*== all animations enable ==*/ #define RGBLIGHT_EFFECT_BREATHING #define RGBLIGHT_EFFECT_RAINBOW_MOOD @@ -33,7 +28,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #define RGBLIGHT_EFFECT_RGB_TEST #define RGBLIGHT_EFFECT_ALTERNATING #define RGBLIGHT_EFFECT_TWINKLE - #define RGBLIGHT_SLEEP /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ #define LOCKING_SUPPORT_ENABLE diff --git a/keyboards/kbdfans/kbd67/hotswap/info.json b/keyboards/kbdfans/kbd67/hotswap/info.json index edbbf6638e..8ddee65b5c 100644 --- a/keyboards/kbdfans/kbd67/hotswap/info.json +++ b/keyboards/kbdfans/kbd67/hotswap/info.json @@ -17,6 +17,12 @@ "pin": "B7", "breathing": true }, + "rgblight": { + "saturation_steps": 8, + "brightness_steps": 8, + "led_count": 8, + "sleep": true + }, "ws2812": { "pin": "B4" }, diff --git a/keyboards/kbdfans/kbd67/hotswap/keymaps/zunger/keymap.c b/keyboards/kbdfans/kbd67/hotswap/keymaps/zunger/keymap.c index cd4a32ff41..33245acc51 100644 --- a/keyboards/kbdfans/kbd67/hotswap/keymaps/zunger/keymap.c +++ b/keyboards/kbdfans/kbd67/hotswap/keymaps/zunger/keymap.c @@ -163,14 +163,3 @@ bool process_record_user(uint16_t keycode, keyrecord_t *record) { void eeconfig_init_user(void) { set_unicode_input_mode(UNICODE_MODE_MACOS); } - -void matrix_init_user(void) { -} - -void matrix_scan_user(void) { - -} - -void led_set_user(uint8_t usb_led) { - -} diff --git a/keyboards/kbdfans/kbd67/mkiirgb/v4/config.h b/keyboards/kbdfans/kbd67/mkiirgb/v4/config.h index 8b79d929d6..2b06b9c43c 100644 --- a/keyboards/kbdfans/kbd67/mkiirgb/v4/config.h +++ b/keyboards/kbdfans/kbd67/mkiirgb/v4/config.h @@ -18,8 +18,7 @@ #define USB_SUSPEND_WAKEUP_DELAY 5000 -#define RGBLED_NUM 68 -#define RGB_MATRIX_LED_COUNT RGBLED_NUM +#define RGB_MATRIX_LED_COUNT 68 #define RGBLIGHT_EFFECT_BREATHING #define RGBLIGHT_EFFECT_RAINBOW_MOOD #define RGBLIGHT_EFFECT_RAINBOW_SWIRL @@ -37,10 +36,6 @@ # define RGB_MATRIX_FRAMEBUFFER_EFFECTS # define RGB_MATRIX_MAXIMUM_BRIGHTNESS 150 // limits maximum brightness of LEDs to 150 out of 255. Higher may cause the controller to crash. # define RGB_MATRIX_DEFAULT_MODE RGB_MATRIX_CYCLE_ALL -# define RGB_MATRIX_HUE_STEP 8 -# define RGB_MATRIX_SAT_STEP 8 -# define RGB_MATRIX_VAL_STEP 8 -# define RGB_MATRIX_SPD_STEP 10 // RGB Matrix Animation modes. Explicitly enabled // For full list of effects, see: // https://docs.qmk.fm/#/feature_rgb_matrix?id=rgb-matrix-effects diff --git a/keyboards/kbdfans/kbd67/mkiirgb/v4/info.json b/keyboards/kbdfans/kbd67/mkiirgb/v4/info.json index f7d5ab552f..f66a39d799 100644 --- a/keyboards/kbdfans/kbd67/mkiirgb/v4/info.json +++ b/keyboards/kbdfans/kbd67/mkiirgb/v4/info.json @@ -4,11 +4,17 @@ "pid": "0x1227", "device_version": "0.0.4" }, + "rgblight": { + "led_count": 68 + }, "ws2812": { "pin": "C7" }, "rgb_matrix": { - "driver": "WS2812" + "driver": "WS2812", + "sat_steps": 8, + "val_steps": 8, + "speed_steps": 10 }, "matrix_pins": { "cols": ["F7", "F6", "F5", "F4", "B0", "B7", "D0", "D1", "D2", "D3", "D5", "D4", "D6", "D7", "B4"], diff --git a/keyboards/kbdfans/kbd67/mkiirgb_iso/config.h b/keyboards/kbdfans/kbd67/mkiirgb_iso/config.h index ede122f3f2..10f0bc0ec2 100644 --- a/keyboards/kbdfans/kbd67/mkiirgb_iso/config.h +++ b/keyboards/kbdfans/kbd67/mkiirgb_iso/config.h @@ -26,10 +26,6 @@ # define RGB_MATRIX_FRAMEBUFFER_EFFECTS # define RGB_MATRIX_MAXIMUM_BRIGHTNESS 150 // limits maximum brightness of LEDs to 150 out of 255. Higher may cause the controller to crash. # define RGB_MATRIX_DEFAULT_MODE RGB_MATRIX_CYCLE_ALL -# define RGB_MATRIX_HUE_STEP 8 -# define RGB_MATRIX_SAT_STEP 8 -# define RGB_MATRIX_VAL_STEP 8 -# define RGB_MATRIX_SPD_STEP 10 // RGB Matrix Animation modes. Explicitly enabled // For full list of effects, see: // https://docs.qmk.fm/#/feature_rgb_matrix?id=rgb-matrix-effects diff --git a/keyboards/kbdfans/kbd67/mkiirgb_iso/info.json b/keyboards/kbdfans/kbd67/mkiirgb_iso/info.json index 4c7d09aa8e..222742ed8f 100644 --- a/keyboards/kbdfans/kbd67/mkiirgb_iso/info.json +++ b/keyboards/kbdfans/kbd67/mkiirgb_iso/info.json @@ -12,7 +12,10 @@ "pin": "C7" }, "rgb_matrix": { - "driver": "WS2812" + "driver": "WS2812", + "sat_steps": 8, + "val_steps": 8, + "speed_steps": 10 }, "matrix_pins": { "cols": ["F7", "F6", "F5", "F4", "B0", "B7", "D0", "D1", "D2", "D3", "D5", "D4", "D6", "D7", "B4"], diff --git a/keyboards/kbdfans/kbd67/rev1/config.h b/keyboards/kbdfans/kbd67/rev1/config.h index 20e3b8f0df..62c2837ebe 100644 --- a/keyboards/kbdfans/kbd67/rev1/config.h +++ b/keyboards/kbdfans/kbd67/rev1/config.h @@ -17,12 +17,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #pragma once - #define RGBLED_NUM 20 - #define RGBLIGHT_HUE_STEP 8 - #define RGBLIGHT_SAT_STEP 8 - #define RGBLIGHT_VAL_STEP 8 - // #define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */ - #define RGBLIGHT_SLEEP #define RGBLIGHT_EFFECT_BREATHING #define RGBLIGHT_EFFECT_RAINBOW_MOOD #define RGBLIGHT_EFFECT_RAINBOW_SWIRL diff --git a/keyboards/kbdfans/kbd67/rev1/info.json b/keyboards/kbdfans/kbd67/rev1/info.json index e34cbb87e2..383d1cc5a8 100644 --- a/keyboards/kbdfans/kbd67/rev1/info.json +++ b/keyboards/kbdfans/kbd67/rev1/info.json @@ -25,7 +25,11 @@ "pin": "E2" }, "rgblight": { - "max_brightness": 180 + "saturation_steps": 8, + "brightness_steps": 8, + "led_count": 20, + "max_brightness": 180, + "sleep": true }, "processor": "atmega32u4", "bootloader": "atmel-dfu", diff --git a/keyboards/kbdfans/kbd67/rev1/keymaps/martinffx/keymap.c b/keyboards/kbdfans/kbd67/rev1/keymaps/martinffx/keymap.c index 5c307a31b1..228f648319 100644 --- a/keyboards/kbdfans/kbd67/rev1/keymaps/martinffx/keymap.c +++ b/keyboards/kbdfans/kbd67/rev1/keymaps/martinffx/keymap.c @@ -85,15 +85,3 @@ bool process_record_user(uint16_t keycode, keyrecord_t *record) { } return true; } - -void matrix_init_user(void) { - -} - -void matrix_scan_user(void) { - -} - -void led_set_user(uint8_t usb_led) { - -} diff --git a/keyboards/kbdfans/kbd67/rev2/config.h b/keyboards/kbdfans/kbd67/rev2/config.h index 1aa30c01cd..7ab9c36d3b 100644 --- a/keyboards/kbdfans/kbd67/rev2/config.h +++ b/keyboards/kbdfans/kbd67/rev2/config.h @@ -27,8 +27,3 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #define RGBLIGHT_EFFECT_RGB_TEST #define RGBLIGHT_EFFECT_ALTERNATING #define RGBLIGHT_EFFECT_TWINKLE -#define RGBLED_NUM 16 -#define RGBLIGHT_HUE_STEP 8 -#define RGBLIGHT_SAT_STEP 8 -#define RGBLIGHT_VAL_STEP 8 -#define RGBLIGHT_SLEEP diff --git a/keyboards/kbdfans/kbd67/rev2/info.json b/keyboards/kbdfans/kbd67/rev2/info.json index bf83ad4af3..7f053c26ce 100644 --- a/keyboards/kbdfans/kbd67/rev2/info.json +++ b/keyboards/kbdfans/kbd67/rev2/info.json @@ -24,7 +24,11 @@ "pin": "E2" }, "rgblight": { - "max_brightness": 240 + "saturation_steps": 8, + "brightness_steps": 8, + "led_count": 16, + "max_brightness": 240, + "sleep": true }, "processor": "atmega32u4", "bootloader": "atmel-dfu", diff --git a/keyboards/kbdfans/kbd67/rev2/keymaps/tucznak/keymap.c b/keyboards/kbdfans/kbd67/rev2/keymaps/tucznak/keymap.c index 682f15c445..88fe681f14 100644 --- a/keyboards/kbdfans/kbd67/rev2/keymaps/tucznak/keymap.c +++ b/keyboards/kbdfans/kbd67/rev2/keymaps/tucznak/keymap.c @@ -69,22 +69,11 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { _______, _______, _______, _______, _______, _______, _______, _______, XXXXXXX, _______, _______, _______), }; -bool process_record_user(uint16_t keycode, keyrecord_t *record) { - return true; -} - -void matrix_init_user(void) { - -} - -void matrix_scan_user(void) { - -} - -void led_set_user(uint8_t usb_led) { - if (usb_led & (1 << USB_LED_CAPS_LOCK)) { +bool led_update_user(led_t led_state) { + if (led_state.caps_lock) { rgblight_enable_noeeprom(); } else { rgblight_disable_noeeprom(); } + return false; } diff --git a/keyboards/kbdfans/kbd6x/config.h b/keyboards/kbdfans/kbd6x/config.h index d29b1e494a..62c2837ebe 100644 --- a/keyboards/kbdfans/kbd6x/config.h +++ b/keyboards/kbdfans/kbd6x/config.h @@ -27,11 +27,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #define RGBLIGHT_EFFECT_RGB_TEST #define RGBLIGHT_EFFECT_ALTERNATING #define RGBLIGHT_EFFECT_TWINKLE -#define RGBLED_NUM 14 -#define RGBLIGHT_HUE_STEP 12 -#define RGBLIGHT_SAT_STEP 12 -#define RGBLIGHT_VAL_STEP 12 -#define RGBLIGHT_SLEEP /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ #define LOCKING_SUPPORT_ENABLE diff --git a/keyboards/kbdfans/kbd6x/info.json b/keyboards/kbdfans/kbd6x/info.json index 782da6bc64..b0ff678010 100644 --- a/keyboards/kbdfans/kbd6x/info.json +++ b/keyboards/kbdfans/kbd6x/info.json @@ -17,6 +17,13 @@ "pin": "B7", "breathing": true }, + "rgblight": { + "hue_steps": 12, + "saturation_steps": 12, + "brightness_steps": 12, + "led_count": 14, + "sleep": true + }, "ws2812": { "pin": "F0" }, diff --git a/keyboards/kbdfans/kbd6x/keymaps/konstantin/keymap.c b/keyboards/kbdfans/kbd6x/keymaps/konstantin/keymap.c index 8f2305ed4c..a8a369a611 100644 --- a/keyboards/kbdfans/kbd6x/keymaps/konstantin/keymap.c +++ b/keyboards/kbdfans/kbd6x/keymaps/konstantin/keymap.c @@ -43,8 +43,8 @@ static void check_light_layer(layer_state_t state) { last_checked_layer = true; } -static void check_light_led(uint8_t leds) { - if (IS_LED_ON(leds, USB_LED_CAPS_LOCK)) { +static void check_light_led(led_t led_state) { + if (led_state.caps_lock) { caps_light(); } else if (IS_LAYER_ON(L_FN)) { fn_light(); @@ -57,7 +57,7 @@ static void check_light_led(uint8_t leds) { static void inline check_light(void) { last_checked_layer ? check_light_layer(layer_state) - : check_light_led(host_keyboard_leds()); + : check_light_led(host_keyboard_led_state()); } void eeconfig_init_keymap(void) { diff --git a/keyboards/kbdfans/kbd75/config.h b/keyboards/kbdfans/kbd75/config.h index 38d9bacad9..8cb5bddc38 100644 --- a/keyboards/kbdfans/kbd75/config.h +++ b/keyboards/kbdfans/kbd75/config.h @@ -19,9 +19,3 @@ #define RGBLIGHT_EFFECT_RGB_TEST #define RGBLIGHT_EFFECT_ALTERNATING #define RGBLIGHT_EFFECT_TWINKLE -#define RGBLED_NUM 16 -#define RGBLIGHT_HUE_STEP 8 -#define RGBLIGHT_SAT_STEP 8 -#define RGBLIGHT_VAL_STEP 8 -/* If defined, the RGB lighting will be switched off when the host goes to sleep */ -#define RGBLIGHT_SLEEP diff --git a/keyboards/kbdfans/kbd75/keymaps/tucznak/keymap.c b/keyboards/kbdfans/kbd75/keymaps/tucznak/keymap.c index 88272e3c72..c7f05a4e94 100644 --- a/keyboards/kbdfans/kbd75/keymaps/tucznak/keymap.c +++ b/keyboards/kbdfans/kbd75/keymaps/tucznak/keymap.c @@ -79,11 +79,12 @@ bool process_record_user(uint16_t keycode, keyrecord_t *record) { return true; } -void led_set_user(uint8_t usb_led) { - if (IS_LED_ON(usb_led, USB_LED_CAPS_LOCK)) { +bool led_update_user(led_t led_state) { + if (led_state.caps_lock) { setPinOutput(B2); writePinLow(B2); } else { setPinInput(B2); } + return false; } diff --git a/keyboards/kbdfans/kbd75/rev1/info.json b/keyboards/kbdfans/kbd75/rev1/info.json index ab56fc90d1..fe52330c9c 100644 --- a/keyboards/kbdfans/kbd75/rev1/info.json +++ b/keyboards/kbdfans/kbd75/rev1/info.json @@ -21,6 +21,12 @@ "caps_lock": "B2", "on_state": 0 }, + "rgblight": { + "saturation_steps": 8, + "brightness_steps": 8, + "led_count": 16, + "sleep": true + }, "ws2812": { "pin": "E2" }, diff --git a/keyboards/kbdfans/kbd75/rev2/info.json b/keyboards/kbdfans/kbd75/rev2/info.json index 11eb19b729..e75a10fd31 100644 --- a/keyboards/kbdfans/kbd75/rev2/info.json +++ b/keyboards/kbdfans/kbd75/rev2/info.json @@ -21,6 +21,12 @@ "caps_lock": "B2", "on_state": 0 }, + "rgblight": { + "saturation_steps": 8, + "brightness_steps": 8, + "led_count": 16, + "sleep": true + }, "ws2812": { "pin": "E2" }, diff --git a/keyboards/kbdfans/kbd75hs/config.h b/keyboards/kbdfans/kbd75hs/config.h index 4bc0c6dcff..fab8ddf3f6 100644 --- a/keyboards/kbdfans/kbd75hs/config.h +++ b/keyboards/kbdfans/kbd75hs/config.h @@ -28,10 +28,5 @@ #define RGBLIGHT_EFFECT_TWINKLE #define RGBLIGHT_DEFAULT_MODE (RGBLIGHT_EFFECT_RAINBOW_MOOD + 6) #define RGBLIGHT_DEFAULT_SPD 15 -#define RGBLED_NUM 18 -#define RGBLIGHT_HUE_STEP 10 -#define RGBLIGHT_SAT_STEP 10 -#define RGBLIGHT_VAL_STEP 10 -#define RGBLIGHT_SLEEP #define VIA_EEPROM_LAYOUT_OPTIONS_SIZE 2 diff --git a/keyboards/kbdfans/kbd75hs/info.json b/keyboards/kbdfans/kbd75hs/info.json index fef9c5a8c2..ec245dbbf1 100644 --- a/keyboards/kbdfans/kbd75hs/info.json +++ b/keyboards/kbdfans/kbd75hs/info.json @@ -16,6 +16,13 @@ "indicators": { "caps_lock": "C6" }, + "rgblight": { + "hue_steps": 10, + "saturation_steps": 10, + "brightness_steps": 10, + "led_count": 18, + "sleep": true + }, "ws2812": { "pin": "F0" }, diff --git a/keyboards/kbdfans/kbd75rgb/config.h b/keyboards/kbdfans/kbd75rgb/config.h index 6d1273875d..6a93d118d6 100644 --- a/keyboards/kbdfans/kbd75rgb/config.h +++ b/keyboards/kbdfans/kbd75rgb/config.h @@ -19,8 +19,7 @@ #define USB_SUSPEND_WAKEUP_DELAY 5000 #define VIA_EEPROM_LAYOUT_OPTIONS_SIZE 2 -#define RGBLED_NUM 84 -#define RGB_MATRIX_LED_COUNT RGBLED_NUM +#define RGB_MATRIX_LED_COUNT 84 #define RGBLIGHT_EFFECT_BREATHING #define RGBLIGHT_EFFECT_RAINBOW_MOOD #define RGBLIGHT_EFFECT_RAINBOW_SWIRL @@ -62,7 +61,3 @@ #define RGB_MATRIX_FRAMEBUFFER_EFFECTS #define RGB_MATRIX_MAXIMUM_BRIGHTNESS 150 // limits maximum brightness of LEDs to 150 out of 255. Higher may cause the controller to crash. #define RGB_MATRIX_DEFAULT_MODE RGB_MATRIX_CYCLE_ALL -#define RGB_MATRIX_HUE_STEP 8 -#define RGB_MATRIX_SAT_STEP 8 -#define RGB_MATRIX_VAL_STEP 8 -#define RGB_MATRIX_SPD_STEP 10 diff --git a/keyboards/kbdfans/kbd75rgb/info.json b/keyboards/kbdfans/kbd75rgb/info.json index 231f13f412..bf2f596f3a 100644 --- a/keyboards/kbdfans/kbd75rgb/info.json +++ b/keyboards/kbdfans/kbd75rgb/info.json @@ -8,11 +8,17 @@ "pid": "0x6063", "device_version": "0.0.1" }, + "rgblight": { + "led_count": 84 + }, "ws2812": { "pin": "C7" }, "rgb_matrix": { - "driver": "WS2812" + "driver": "WS2812", + "sat_steps": 8, + "val_steps": 8, + "speed_steps": 10 }, "matrix_pins": { "cols": ["F7", "F6", "F5", "F4", "E6", "B3", "B7", "D0", "D1", "D2", "D3", "D5", "D4", "D6", "D7"], diff --git a/keyboards/kbdfans/kbd8x/config.h b/keyboards/kbdfans/kbd8x/config.h index 655b83f0e3..e5b1e26b62 100644 --- a/keyboards/kbdfans/kbd8x/config.h +++ b/keyboards/kbdfans/kbd8x/config.h @@ -27,11 +27,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #define RGBLIGHT_EFFECT_RGB_TEST #define RGBLIGHT_EFFECT_ALTERNATING #define RGBLIGHT_EFFECT_TWINKLE -#define RGBLED_NUM 20 -#define RGBLIGHT_HUE_STEP 8 -#define RGBLIGHT_SAT_STEP 8 -#define RGBLIGHT_VAL_STEP 8 -#define RGBLIGHT_SLEEP /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ #define LOCKING_SUPPORT_ENABLE diff --git a/keyboards/kbdfans/kbd8x/info.json b/keyboards/kbdfans/kbd8x/info.json index eeda61ac35..0239fa78a9 100644 --- a/keyboards/kbdfans/kbd8x/info.json +++ b/keyboards/kbdfans/kbd8x/info.json @@ -22,6 +22,12 @@ "num_lock": "B1", "scroll_lock": "B2" }, + "rgblight": { + "saturation_steps": 8, + "brightness_steps": 8, + "led_count": 20, + "sleep": true + }, "ws2812": { "pin": "E2" }, diff --git a/keyboards/kbdfans/kbd8x_mk2/config.h b/keyboards/kbdfans/kbd8x_mk2/config.h index 74fad03a87..ee31dd7bfe 100644 --- a/keyboards/kbdfans/kbd8x_mk2/config.h +++ b/keyboards/kbdfans/kbd8x_mk2/config.h @@ -17,11 +17,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #pragma once - #define RGBLED_NUM 20 - #define RGBLIGHT_HUE_STEP 8 - #define RGBLIGHT_SAT_STEP 8 - #define RGBLIGHT_VAL_STEP 8 - #define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */ #define RGBLIGHT_EFFECT_BREATHING #define RGBLIGHT_EFFECT_RAINBOW_MOOD #define RGBLIGHT_EFFECT_RAINBOW_SWIRL diff --git a/keyboards/kbdfans/kbd8x_mk2/info.json b/keyboards/kbdfans/kbd8x_mk2/info.json index 5c15e9e2d5..1029582d5b 100644 --- a/keyboards/kbdfans/kbd8x_mk2/info.json +++ b/keyboards/kbdfans/kbd8x_mk2/info.json @@ -21,7 +21,11 @@ "pin": "B3" }, "rgblight": { - "max_brightness": 200 + "saturation_steps": 8, + "brightness_steps": 8, + "led_count": 20, + "max_brightness": 200, + "sleep": true }, "indicators": { "caps_lock": "E6", diff --git a/keyboards/kbdfans/kbd8x_mk2/keymaps/ai03/keymap.c b/keyboards/kbdfans/kbd8x_mk2/keymaps/ai03/keymap.c index 8049c4ef5c..2e91933f44 100644 --- a/keyboards/kbdfans/kbd8x_mk2/keymaps/ai03/keymap.c +++ b/keyboards/kbdfans/kbd8x_mk2/keymaps/ai03/keymap.c @@ -35,19 +35,3 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { _______, _______, _______, _______, _______, _______, _______, _______, KC_HOME, KC_PGDN, KC_END ) }; - -bool process_record_user(uint16_t keycode, keyrecord_t *record) { - return true; -} - -void matrix_init_user(void) { - -} - -void matrix_scan_user(void) { - -} - -void led_set_user(uint8_t usb_led) { - -} diff --git a/keyboards/kbdfans/kbdpad/mk1/config.h b/keyboards/kbdfans/kbdpad/mk1/config.h index a3a9a993df..d849732a07 100644 --- a/keyboards/kbdfans/kbdpad/mk1/config.h +++ b/keyboards/kbdfans/kbdpad/mk1/config.h @@ -27,4 +27,3 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #define RGBLIGHT_EFFECT_RGB_TEST #define RGBLIGHT_EFFECT_ALTERNATING #define RGBLIGHT_EFFECT_TWINKLE -#define RGBLED_NUM 6 diff --git a/keyboards/kbdfans/kbdpad/mk1/info.json b/keyboards/kbdfans/kbdpad/mk1/info.json index 3527370e4c..4495eab886 100644 --- a/keyboards/kbdfans/kbdpad/mk1/info.json +++ b/keyboards/kbdfans/kbdpad/mk1/info.json @@ -17,6 +17,9 @@ "pin": "D4", "breathing": true }, + "rgblight": { + "led_count": 6 + }, "ws2812": { "driver": "i2c" }, diff --git a/keyboards/kbdfans/kbdpad/mk2/config.h b/keyboards/kbdfans/kbdpad/mk2/config.h index 9457b20766..ee31dd7bfe 100644 --- a/keyboards/kbdfans/kbdpad/mk2/config.h +++ b/keyboards/kbdfans/kbdpad/mk2/config.h @@ -17,11 +17,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #pragma once - #define RGBLED_NUM 16 - #define RGBLIGHT_HUE_STEP 8 - #define RGBLIGHT_SAT_STEP 8 - #define RGBLIGHT_VAL_STEP 8 - #define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */ #define RGBLIGHT_EFFECT_BREATHING #define RGBLIGHT_EFFECT_RAINBOW_MOOD #define RGBLIGHT_EFFECT_RAINBOW_SWIRL diff --git a/keyboards/kbdfans/kbdpad/mk2/info.json b/keyboards/kbdfans/kbdpad/mk2/info.json index dc47064fee..3d2afceb24 100644 --- a/keyboards/kbdfans/kbdpad/mk2/info.json +++ b/keyboards/kbdfans/kbdpad/mk2/info.json @@ -18,6 +18,12 @@ "levels": 5, "breathing": true }, + "rgblight": { + "saturation_steps": 8, + "brightness_steps": 8, + "led_count": 16, + "sleep": true + }, "ws2812": { "pin": "B5" }, diff --git a/keyboards/kbdfans/niu_mini/config.h b/keyboards/kbdfans/niu_mini/config.h index fb154031a0..7eaf08234a 100644 --- a/keyboards/kbdfans/niu_mini/config.h +++ b/keyboards/kbdfans/niu_mini/config.h @@ -33,10 +33,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #define RGBLIGHT_EFFECT_RGB_TEST #define RGBLIGHT_EFFECT_ALTERNATING #define RGBLIGHT_EFFECT_TWINKLE - #define RGBLED_NUM 14 - #define RGBLIGHT_HUE_STEP 8 - #define RGBLIGHT_SAT_STEP 8 - #define RGBLIGHT_VAL_STEP 8 /* * Feature disable options diff --git a/keyboards/kbdfans/niu_mini/info.json b/keyboards/kbdfans/niu_mini/info.json index 4ba2f38516..9719c832ec 100644 --- a/keyboards/kbdfans/niu_mini/info.json +++ b/keyboards/kbdfans/niu_mini/info.json @@ -17,6 +17,11 @@ "pin": "B6", "levels": 4 }, + "rgblight": { + "saturation_steps": 8, + "brightness_steps": 8, + "led_count": 14 + }, "ws2812": { "pin": "E2" }, diff --git a/keyboards/kbdfans/niu_mini/keymaps/codecoffeecode/keymap.c b/keyboards/kbdfans/niu_mini/keymaps/codecoffeecode/keymap.c index 523b6cf1a0..7f6f89589b 100644 --- a/keyboards/kbdfans/niu_mini/keymaps/codecoffeecode/keymap.c +++ b/keyboards/kbdfans/niu_mini/keymaps/codecoffeecode/keymap.c @@ -56,48 +56,3 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______ ) }; - - -void matrix_init_user(void) { -} - -void matrix_scan_user(void) { -} - -bool process_record_user(uint16_t keycode, keyrecord_t *record) { - return true; -} - -void led_set_user(uint8_t usb_led) { - - if (IS_LED_ON(usb_led, USB_LED_NUM_LOCK)) { - - } else { - - } - - if (IS_LED_ON(usb_led, USB_LED_CAPS_LOCK)) { - - } else { - - } - - if (IS_LED_ON(usb_led, USB_LED_SCROLL_LOCK)) { - - } else { - - } - - if (IS_LED_ON(usb_led, USB_LED_COMPOSE)) { - - } else { - - } - - if (IS_LED_ON(usb_led, USB_LED_KANA)) { - - } else { - - } - -} diff --git a/keyboards/kbdfans/niu_mini/keymaps/tobias/keymap.c b/keyboards/kbdfans/niu_mini/keymaps/tobias/keymap.c index 0631ceb185..8c7d3b8e0e 100644 --- a/keyboards/kbdfans/niu_mini/keymaps/tobias/keymap.c +++ b/keyboards/kbdfans/niu_mini/keymaps/tobias/keymap.c @@ -377,37 +377,7 @@ layer_state_t layer_state_set_user(layer_state_t state) { */ -void led_set_user(uint8_t usb_led) { - - if (usb_led & (1 << USB_LED_NUM_LOCK)) { - bnumlock = true; - - } else { - bnumlock = false; - } - - if (usb_led & (1 << USB_LED_CAPS_LOCK)) { - - } else { - - } - - if (usb_led & (1 << USB_LED_SCROLL_LOCK)) { - - } else { - - } - - if (usb_led & (1 << USB_LED_COMPOSE)) { - - } else { - - } - - if (usb_led & (1 << USB_LED_KANA)) { - - } else { - - } - +bool led_update_user(led_t led_state) { + bnumlock = led_state.num_lock; + return false; } diff --git a/keyboards/kbdfans/niu_mini/keymaps/tucznak/keymap.c b/keyboards/kbdfans/niu_mini/keymaps/tucznak/keymap.c index b4f75a9d1e..e4f2eb44cf 100644 --- a/keyboards/kbdfans/niu_mini/keymaps/tucznak/keymap.c +++ b/keyboards/kbdfans/niu_mini/keymaps/tucznak/keymap.c @@ -112,22 +112,9 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { ) }; - -void matrix_init_user(void) { - -} - -void matrix_scan_user(void) { - -} - bool process_record_user(uint16_t keycode, keyrecord_t *record) { if (!process_record_dynamic_macro(keycode, record)) { return false; } return true; } - -void led_set_user(uint8_t usb_led) { - -} diff --git a/keyboards/kbdfans/odin/rgb/config.h b/keyboards/kbdfans/odin/rgb/config.h index 54794e66be..9cc883891a 100644 --- a/keyboards/kbdfans/odin/rgb/config.h +++ b/keyboards/kbdfans/odin/rgb/config.h @@ -16,7 +16,6 @@ #pragma once -#define RGBLED_NUM 104 #define RGB_MATRIX_LED_COUNT 104 #ifdef RGB_MATRIX_ENABLE diff --git a/keyboards/kbdfans/odin/rgb/rules.mk b/keyboards/kbdfans/odin/rgb/rules.mk index b7807ae418..c49a369dd0 100644 --- a/keyboards/kbdfans/odin/rgb/rules.mk +++ b/keyboards/kbdfans/odin/rgb/rules.mk @@ -12,5 +12,3 @@ RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow AUDIO_ENABLE = no # Audio output RGB_MATRIX_ENABLE = yes -# Enter lower-power sleep mode when on the ChibiOS idle thread -OPT_DEFS += -DCORTEX_ENABLE_WFI_IDLE=TRUE diff --git a/keyboards/kbdfans/odin/soldered/config.h b/keyboards/kbdfans/odin/soldered/config.h index b55a558628..7c771d1d0d 100644 --- a/keyboards/kbdfans/odin/soldered/config.h +++ b/keyboards/kbdfans/odin/soldered/config.h @@ -16,7 +16,6 @@ #pragma once -#define RGBLED_NUM 4 #define RGBLIGHT_EFFECT_BREATHING #define RGBLIGHT_EFFECT_RAINBOW_MOOD #define RGBLIGHT_EFFECT_RAINBOW_SWIRL @@ -28,9 +27,5 @@ #define RGBLIGHT_EFFECT_ALTERNATING #define RGBLIGHT_EFFECT_TWINKLE #define RGBLIGHT_DEFAULT_MODE (RGBLIGHT_EFFECT_RAINBOW_MOOD + 8) -#define RGBLIGHT_HUE_STEP 8 -#define RGBLIGHT_SAT_STEP 8 -#define RGBLIGHT_VAL_STEP 8 -#define RGBLIGHT_SLEEP #define VIA_EEPROM_LAYOUT_OPTIONS_SIZE 2 diff --git a/keyboards/kbdfans/odin/soldered/info.json b/keyboards/kbdfans/odin/soldered/info.json index acbdc574bf..0b99fd1eb8 100644 --- a/keyboards/kbdfans/odin/soldered/info.json +++ b/keyboards/kbdfans/odin/soldered/info.json @@ -22,7 +22,11 @@ "pin": "B15" }, "rgblight": { - "max_brightness": 180 + "saturation_steps": 8, + "brightness_steps": 8, + "led_count": 4, + "max_brightness": 180, + "sleep": true }, "processor": "STM32F072", "bootloader": "stm32-dfu", diff --git a/keyboards/kbdfans/odin/soldered/rules.mk b/keyboards/kbdfans/odin/soldered/rules.mk index 9e42693cb6..c3b8e77d77 100644 --- a/keyboards/kbdfans/odin/soldered/rules.mk +++ b/keyboards/kbdfans/odin/soldered/rules.mk @@ -11,5 +11,3 @@ BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow AUDIO_ENABLE = no # Audio output -# Enter lower-power sleep mode when on the ChibiOS idle thread -OPT_DEFS += -DCORTEX_ENABLE_WFI_IDLE=TRUE diff --git a/keyboards/kbdfans/odin/v2/config.h b/keyboards/kbdfans/odin/v2/config.h index a753f00c6a..d82b94c5db 100644 --- a/keyboards/kbdfans/odin/v2/config.h +++ b/keyboards/kbdfans/odin/v2/config.h @@ -16,7 +16,6 @@ #pragma once - #define RGBLED_NUM 4 #define RGBLIGHT_EFFECT_STATIC_GRADIENT #define RGBLIGHT_EFFECT_RAINBOW_SWIRL #define RGBLIGHT_EFFECT_RAINBOW_MOOD @@ -25,8 +24,3 @@ #define RGBLIGHT_EFFECT_BREATHING #define RGBLIGHT_DEFAULT_MODE RGBLIGHT_MODE_RAINBOW_SWIRL - - #define RGBLIGHT_HUE_STEP 8 - #define RGBLIGHT_SAT_STEP 8 - #define RGBLIGHT_VAL_STEP 8 - #define RGBLIGHT_SLEEP diff --git a/keyboards/kbdfans/odin/v2/info.json b/keyboards/kbdfans/odin/v2/info.json index 59d2dde7ac..5af1d84aac 100644 --- a/keyboards/kbdfans/odin/v2/info.json +++ b/keyboards/kbdfans/odin/v2/info.json @@ -22,7 +22,11 @@ "pin": "B15" }, "rgblight": { - "max_brightness": 180 + "saturation_steps": 8, + "brightness_steps": 8, + "led_count": 4, + "max_brightness": 180, + "sleep": true }, "processor": "STM32F072", "bootloader": "stm32-dfu", diff --git a/keyboards/kbdfans/odin/v2/rules.mk b/keyboards/kbdfans/odin/v2/rules.mk index 0f15f10b20..0098dc473a 100644 --- a/keyboards/kbdfans/odin/v2/rules.mk +++ b/keyboards/kbdfans/odin/v2/rules.mk @@ -11,5 +11,3 @@ BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality RGBLIGHT_ENABLE = yes # Enable keyboard RGB underglow AUDIO_ENABLE = no # Audio output -# Enter lower-power sleep mode when on the ChibiOS idle thread -OPT_DEFS += -DCORTEX_ENABLE_WFI_IDLE=TRUE diff --git a/keyboards/kbdfans/phaseone/config.h b/keyboards/kbdfans/phaseone/config.h index a8e7f41e17..86e1483148 100644 --- a/keyboards/kbdfans/phaseone/config.h +++ b/keyboards/kbdfans/phaseone/config.h @@ -32,10 +32,5 @@ #define RGBLIGHT_EFFECT_TWINKLE #define RGBLIGHT_DEFAULT_MODE (RGBLIGHT_EFFECT_RAINBOW_MOOD + 6) #define RGBLIGHT_DEFAULT_SPD 15 -#define RGBLED_NUM 4 -#define RGBLIGHT_HUE_STEP 10 -#define RGBLIGHT_SAT_STEP 10 -#define RGBLIGHT_VAL_STEP 10 -#define RGBLIGHT_SLEEP #define VIA_EEPROM_LAYOUT_OPTIONS_SIZE 2
\ No newline at end of file diff --git a/keyboards/kbdfans/phaseone/info.json b/keyboards/kbdfans/phaseone/info.json index 0b4bf2e19f..836bc0952f 100644 --- a/keyboards/kbdfans/phaseone/info.json +++ b/keyboards/kbdfans/phaseone/info.json @@ -18,6 +18,13 @@ "num_lock": "D7", "on_state": 0 }, + "rgblight": { + "hue_steps": 10, + "saturation_steps": 10, + "brightness_steps": 10, + "led_count": 4, + "sleep": true + }, "ws2812": { "pin": "B6" }, diff --git a/keyboards/kbnordic/nordic60/rev_a/config.h b/keyboards/kbnordic/nordic60/rev_a/config.h index 5298868bcf..ff552db0fa 100644 --- a/keyboards/kbnordic/nordic60/rev_a/config.h +++ b/keyboards/kbnordic/nordic60/rev_a/config.h @@ -16,11 +16,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. */ #pragma once -#define RGBLED_NUM 16 - -#define RGBLIGHT_HUE_STEP 8 -#define RGBLIGHT_SAT_STEP 8 -#define RGBLIGHT_VAL_STEP 8 #define RGBLIGHT_EFFECT_BREATHING #define RGBLIGHT_EFFECT_RAINBOW_MOOD #define RGBLIGHT_EFFECT_RAINBOW_SWIRL diff --git a/keyboards/kbnordic/nordic60/rev_a/info.json b/keyboards/kbnordic/nordic60/rev_a/info.json index 126de687b8..de5033583e 100644 --- a/keyboards/kbnordic/nordic60/rev_a/info.json +++ b/keyboards/kbnordic/nordic60/rev_a/info.json @@ -8,6 +8,11 @@ "pid": "0x0001", "device_version": "0.0.1" }, + "rgblight": { + "saturation_steps": 8, + "brightness_steps": 8, + "led_count": 16 + }, "ws2812": { "pin": "D3" }, diff --git a/keyboards/kc60/config.h b/keyboards/kc60/config.h index 5f542b7ade..dc1ae20cdc 100644 --- a/keyboards/kc60/config.h +++ b/keyboards/kc60/config.h @@ -17,11 +17,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #pragma once -# define RGBLED_NUM 16 -# define RGBLIGHT_HUE_STEP 8 -# define RGBLIGHT_SAT_STEP 8 -# define RGBLIGHT_VAL_STEP 8 -# define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */ #define RGBLIGHT_EFFECT_BREATHING #define RGBLIGHT_EFFECT_RAINBOW_MOOD #define RGBLIGHT_EFFECT_RAINBOW_SWIRL diff --git a/keyboards/kc60/info.json b/keyboards/kc60/info.json index ca8580ad1a..2aa5ab5eab 100644 --- a/keyboards/kc60/info.json +++ b/keyboards/kc60/info.json @@ -18,6 +18,12 @@ "levels": 5, "breathing": true }, + "rgblight": { + "saturation_steps": 8, + "brightness_steps": 8, + "led_count": 16, + "sleep": true + }, "ws2812": { "pin": "F5" }, diff --git a/keyboards/keebformom/config.h b/keyboards/keebformom/config.h index 315e8e0bc6..e10ff8b983 100644 --- a/keyboards/keebformom/config.h +++ b/keyboards/keebformom/config.h @@ -16,11 +16,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #pragma once -#define RGBLED_NUM 40 -#define RGBLIGHT_HUE_STEP 8 -#define RGBLIGHT_SAT_STEP 8 -#define RGBLIGHT_VAL_STEP 8 -#define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */ # define RGBLIGHT_EFFECT_BREATHING # define RGBLIGHT_EFFECT_RAINBOW_MOOD # define RGBLIGHT_EFFECT_RAINBOW_SWIRL diff --git a/keyboards/keebformom/info.json b/keyboards/keebformom/info.json index afb2058f43..cae706055a 100644 --- a/keyboards/keebformom/info.json +++ b/keyboards/keebformom/info.json @@ -12,7 +12,11 @@ "pin": "F4" }, "rgblight": { - "max_brightness": 150 + "saturation_steps": 8, + "brightness_steps": 8, + "led_count": 40, + "max_brightness": 150, + "sleep": true }, "matrix_pins": { "cols": ["B3", "B2", "D1", "D0", "D4", "C6", "D7", "E6", "B4", "B5"], diff --git a/keyboards/keebio/bamfk1/config.h b/keyboards/keebio/bamfk1/config.h index c8587e1efb..5c9d9b741d 100644 --- a/keyboards/keebio/bamfk1/config.h +++ b/keyboards/keebio/bamfk1/config.h @@ -8,14 +8,6 @@ # define STARTUP_SONG SONG(STARTUP_SOUND) #endif -#define ENCODERS_CW_KEY { { 1, 1 }, { 3, 1 } } -#define ENCODERS_CCW_KEY { { 0, 1 }, { 2, 1 } } - -# define RGBLED_NUM 16 -# define RGBLIGHT_HUE_STEP 8 -# define RGBLIGHT_SAT_STEP 8 -# define RGBLIGHT_VAL_STEP 8 -# define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */ # define RGBLIGHT_EFFECT_BREATHING # define RGBLIGHT_EFFECT_RAINBOW_MOOD # define RGBLIGHT_EFFECT_RAINBOW_SWIRL diff --git a/keyboards/keebio/bamfk1/info.json b/keyboards/keebio/bamfk1/info.json index 77dcc1f7dd..042f8555af 100644 --- a/keyboards/keebio/bamfk1/info.json +++ b/keyboards/keebio/bamfk1/info.json @@ -8,6 +8,12 @@ "pid": "0x1111", "device_version": "0.0.1" }, + "rgblight": { + "saturation_steps": 8, + "brightness_steps": 8, + "led_count": 16, + "sleep": true + }, "ws2812": { "pin": "D3" }, @@ -21,8 +27,7 @@ "bootloader": "atmel-dfu", "matrix_pins": { "direct": [ - ["E6", "B6", "D6", null], - [null, null, null, null] + ["E6", "B6", "D6"] ] }, "layouts": { @@ -30,12 +35,7 @@ "layout": [ {"x": 1.5, "y": 0, "h": 2, "w": 2, "matrix": [0, 0]}, {"x": 0.5, "y": 2.25, "matrix": [0, 1]}, - {"x": 3.5, "y": 2.25, "matrix": [0, 2]}, - - {"x": 0, "y": 3.5, "matrix": [1, 0]}, - {"x": 1, "y": 3.5, "matrix": [1, 1]}, - {"x": 3, "y": 3.5, "matrix": [1, 2]}, - {"x": 4, "y": 3.5, "matrix": [1, 3]} + {"x": 3.5, "y": 2.25, "matrix": [0, 2]} ] } } diff --git a/keyboards/keebio/bamfk1/keymaps/default/keymap.c b/keyboards/keebio/bamfk1/keymaps/default/keymap.c index aa0780eafc..8ff3f794a5 100644 --- a/keyboards/keebio/bamfk1/keymaps/default/keymap.c +++ b/keyboards/keebio/bamfk1/keymaps/default/keymap.c @@ -13,27 +13,28 @@ enum layer_names { const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { [_MAIN] = LAYOUT( - KC_A, // Big Switch - MO(1), KC_MUTE, // Encoder presses - KC_DOWN, KC_UP, // Left encoder turns - KC_VOLD, KC_VOLU // Right encoder turns + RGB_MOD, // Big Switch + TL_LOWR, KC_MUTE // Encoder presses ), [_FN1] = LAYOUT( KC_B, // Big Switch - _______, KC_C, // Encoder presses - KC_PGDN, KC_PGUP, // Left encoder turns - KC_VOLU, KC_VOLD // Right encoder turns + _______, KC_C // Encoder presses ), [_FN2] = LAYOUT( _______, // Big Switch - _______, _______, // Encoder presses - _______, _______, // Left encoder turns - _______, _______ // Right encoder turns + _______, _______ // Encoder presses ), [_FN3] = LAYOUT( _______, // Big Switch - _______, _______, // Encoder presses - _______, _______, // Left encoder turns - _______, _______ // Right encoder turns + _______, _______ // Encoder presses ) }; + +#ifdef ENCODER_MAP_ENABLE +const uint16_t PROGMEM encoder_map[][NUM_ENCODERS][NUM_DIRECTIONS] = { + [0] = { ENCODER_CCW_CW(KC_DOWN, KC_UP), ENCODER_CCW_CW(KC_VOLD, KC_VOLU) }, + [1] = { ENCODER_CCW_CW(KC_PGDN, KC_PGUP), ENCODER_CCW_CW(_______, _______) }, + [2] = { ENCODER_CCW_CW(_______, _______), ENCODER_CCW_CW(_______, _______) }, + [3] = { ENCODER_CCW_CW(_______, _______), ENCODER_CCW_CW(_______, _______) } +}; +#endif diff --git a/keyboards/keebio/bamfk1/keymaps/default/rules.mk b/keyboards/keebio/bamfk1/keymaps/default/rules.mk new file mode 100644 index 0000000000..ee32568148 --- /dev/null +++ b/keyboards/keebio/bamfk1/keymaps/default/rules.mk @@ -0,0 +1 @@ +ENCODER_MAP_ENABLE = yes diff --git a/keyboards/keebio/bamfk1/keymaps/via/keymap.c b/keyboards/keebio/bamfk1/keymaps/via/keymap.c index 80ada5d8aa..8ff3f794a5 100644 --- a/keyboards/keebio/bamfk1/keymaps/via/keymap.c +++ b/keyboards/keebio/bamfk1/keymaps/via/keymap.c @@ -14,26 +14,27 @@ enum layer_names { const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { [_MAIN] = LAYOUT( RGB_MOD, // Big Switch - TL_LOWR, KC_MUTE, // Encoder presses - KC_DOWN, KC_UP, // Left encoder turns - KC_VOLD, KC_VOLU // Right encoder turns + TL_LOWR, KC_MUTE // Encoder presses ), [_FN1] = LAYOUT( KC_B, // Big Switch - _______, KC_C, // Encoder presses - KC_PGDN, KC_PGUP, // Left encoder turns - KC_VOLU, KC_VOLD // Right encoder turns + _______, KC_C // Encoder presses ), [_FN2] = LAYOUT( _______, // Big Switch - _______, _______, // Encoder presses - _______, _______, // Left encoder turns - _______, _______ // Right encoder turns + _______, _______ // Encoder presses ), [_FN3] = LAYOUT( _______, // Big Switch - _______, _______, // Encoder presses - _______, _______, // Left encoder turns - _______, _______ // Right encoder turns + _______, _______ // Encoder presses ) }; + +#ifdef ENCODER_MAP_ENABLE +const uint16_t PROGMEM encoder_map[][NUM_ENCODERS][NUM_DIRECTIONS] = { + [0] = { ENCODER_CCW_CW(KC_DOWN, KC_UP), ENCODER_CCW_CW(KC_VOLD, KC_VOLU) }, + [1] = { ENCODER_CCW_CW(KC_PGDN, KC_PGUP), ENCODER_CCW_CW(_______, _______) }, + [2] = { ENCODER_CCW_CW(_______, _______), ENCODER_CCW_CW(_______, _______) }, + [3] = { ENCODER_CCW_CW(_______, _______), ENCODER_CCW_CW(_______, _______) } +}; +#endif diff --git a/keyboards/keebio/bamfk1/keymaps/via/rules.mk b/keyboards/keebio/bamfk1/keymaps/via/rules.mk index 36b7ba9cbc..1189f4ad19 100644 --- a/keyboards/keebio/bamfk1/keymaps/via/rules.mk +++ b/keyboards/keebio/bamfk1/keymaps/via/rules.mk @@ -1,2 +1,3 @@ VIA_ENABLE = yes LTO_ENABLE = yes +ENCODER_MAP_ENABLE = yes diff --git a/keyboards/keebio/bamfk1/rules.mk b/keyboards/keebio/bamfk1/rules.mk index 514d88831a..21df40039e 100644 --- a/keyboards/keebio/bamfk1/rules.mk +++ b/keyboards/keebio/bamfk1/rules.mk @@ -2,9 +2,9 @@ # change yes to no to disable # BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite -MOUSEKEY_ENABLE = no # Mouse keys +MOUSEKEY_ENABLE = yes # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control -CONSOLE_ENABLE = yes # Console for debug +CONSOLE_ENABLE = no # Console for debug COMMAND_ENABLE = no # Commands for debug and configuration NKRO_ENABLE = no # Enable N-Key Rollover BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality @@ -12,5 +12,3 @@ RGBLIGHT_ENABLE = yes # Enable keyboard RGB underglow AUDIO_ENABLE = yes # Audio output ENCODER_ENABLE = yes LTO_ENABLE = yes - -SRC += encoder_actions.c diff --git a/keyboards/keebio/bamfk4/config.h b/keyboards/keebio/bamfk4/config.h index a28636c8b6..2be2b02e6e 100644 --- a/keyboards/keebio/bamfk4/config.h +++ b/keyboards/keebio/bamfk4/config.h @@ -3,11 +3,6 @@ #pragma once -# define RGBLED_NUM 32 -# define RGBLIGHT_HUE_STEP 8 -# define RGBLIGHT_SAT_STEP 8 -# define RGBLIGHT_VAL_STEP 8 -# define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */ /*== enabled animations ==*/ # define RGBLIGHT_EFFECT_BREATHING # define RGBLIGHT_EFFECT_RAINBOW_MOOD @@ -62,7 +57,7 @@ # define ENABLE_RGB_MATRIX_SOLID_MULTISPLASH # define RGB_MATRIX_MAXIMUM_BRIGHTNESS 160 # define RGB_MATRIX_DEFAULT_VAL RGB_MATRIX_MAXIMUM_BRIGHTNESS -# define RGB_MATRIX_LED_COUNT RGBLED_NUM +# define RGB_MATRIX_LED_COUNT 32 # define RGB_DISABLE_WHEN_USB_SUSPENDED # define RGB_MATRIX_KEYPRESSES //# endif diff --git a/keyboards/keebio/bamfk4/info.json b/keyboards/keebio/bamfk4/info.json index 40128e0820..52e072dcf9 100644 --- a/keyboards/keebio/bamfk4/info.json +++ b/keyboards/keebio/bamfk4/info.json @@ -15,7 +15,11 @@ "driver": "WS2812" }, "rgblight": { - "max_brightness": 120 + "saturation_steps": 8, + "brightness_steps": 8, + "led_count": 32, + "max_brightness": 120, + "sleep": true }, "matrix_pins": { "cols": ["E6", "D5", "B6", "B7"], diff --git a/keyboards/keebio/bdn9/rev1/config.h b/keyboards/keebio/bdn9/rev1/config.h index 64879bca49..5a4e849a57 100644 --- a/keyboards/keebio/bdn9/rev1/config.h +++ b/keyboards/keebio/bdn9/rev1/config.h @@ -17,11 +17,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #pragma once - #define RGBLED_NUM 4 - #define RGBLIGHT_HUE_STEP 8 - #define RGBLIGHT_SAT_STEP 8 - #define RGBLIGHT_VAL_STEP 8 - #define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */ #define RGBLIGHT_EFFECT_BREATHING #define RGBLIGHT_EFFECT_RAINBOW_MOOD #define RGBLIGHT_EFFECT_RAINBOW_SWIRL diff --git a/keyboards/keebio/bdn9/rev1/info.json b/keyboards/keebio/bdn9/rev1/info.json index 4a346fd564..aa042a7da7 100644 --- a/keyboards/keebio/bdn9/rev1/info.json +++ b/keyboards/keebio/bdn9/rev1/info.json @@ -15,6 +15,12 @@ "pin": "B5", "levels": 7 }, + "rgblight": { + "saturation_steps": 8, + "brightness_steps": 8, + "led_count": 4, + "sleep": true + }, "ws2812": { "pin": "D3" }, diff --git a/keyboards/keebio/bdn9/rev2/config.h b/keyboards/keebio/bdn9/rev2/config.h index 70f785d37b..ae46e0348f 100644 --- a/keyboards/keebio/bdn9/rev2/config.h +++ b/keyboards/keebio/bdn9/rev2/config.h @@ -17,13 +17,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #pragma once -#define TAP_CODE_DELAY 10 - -# define RGBLED_NUM 11 -# define RGBLIGHT_HUE_STEP 8 -# define RGBLIGHT_SAT_STEP 8 -# define RGBLIGHT_VAL_STEP 8 -# define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */ # define RGBLIGHT_EFFECT_BREATHING # define RGBLIGHT_EFFECT_RAINBOW_MOOD # define RGBLIGHT_EFFECT_RAINBOW_SWIRL @@ -36,7 +29,7 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. # define RGBLIGHT_EFFECT_TWINKLE // RGB Matrix # ifdef RGB_MATRIX_ENABLE -# define RGB_MATRIX_LED_COUNT RGBLED_NUM +# define RGB_MATRIX_LED_COUNT 11 # define RGB_MATRIX_FRAMEBUFFER_EFFECTS # define RGB_MATRIX_KEYPRESSES // RGB Matrix Animation modes. Explicitly enabled diff --git a/keyboards/keebio/bdn9/rev2/info.json b/keyboards/keebio/bdn9/rev2/info.json index 5a33976f83..c7dd5d6bcd 100644 --- a/keyboards/keebio/bdn9/rev2/info.json +++ b/keyboards/keebio/bdn9/rev2/info.json @@ -4,6 +4,12 @@ "pid": "0x2133", "device_version": "2.0.0" }, + "rgblight": { + "saturation_steps": 8, + "brightness_steps": 8, + "led_count": 11, + "sleep": true + }, "ws2812": { "pin": "B15" }, @@ -17,6 +23,9 @@ {"pin_a": "A10", "pin_b": "A9"} ] }, + "qmk": { + "tap_keycode_delay": 10 + }, "processor": "STM32F072", "bootloader": "stm32-dfu", "matrix_pins": { diff --git a/keyboards/keebio/bdn9/rev2/rules.mk b/keyboards/keebio/bdn9/rev2/rules.mk index de8fd9fc26..e407769147 100644 --- a/keyboards/keebio/bdn9/rev2/rules.mk +++ b/keyboards/keebio/bdn9/rev2/rules.mk @@ -13,5 +13,3 @@ AUDIO_ENABLE = no # Audio output ENCODER_ENABLE = yes RGB_MATRIX_ENABLE = yes -# Enter lower-power sleep mode when on the ChibiOS idle thread -OPT_DEFS += -DCORTEX_ENABLE_WFI_IDLE=TRUE diff --git a/keyboards/keebio/bfo9000/config.h b/keyboards/keebio/bfo9000/config.h index 48fd0aaf0c..0b8941e776 100644 --- a/keyboards/keebio/bfo9000/config.h +++ b/keyboards/keebio/bfo9000/config.h @@ -23,10 +23,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. /* Locking resynchronize hack */ #define LOCKING_RESYNC_ENABLE -/* ws2812 RGB LED */ -#define RGBLED_NUM 20 // Number of LEDs -#define RGBLED_SPLIT { 10, 10 } - /* * Feature disable options * These options are also useful to firmware size reduction. diff --git a/keyboards/keebio/bfo9000/info.json b/keyboards/keebio/bfo9000/info.json index 9900dbe951..5738ac6953 100644 --- a/keyboards/keebio/bfo9000/info.json +++ b/keyboards/keebio/bfo9000/info.json @@ -16,6 +16,10 @@ "split": { "soft_serial_pin": "D0" }, + "rgblight": { + "led_count": 20, + "split_count": [10, 10] + }, "ws2812": { "pin": "B4" }, diff --git a/keyboards/keebio/bfo9000/keymaps/abstractkb/keymap.c b/keyboards/keebio/bfo9000/keymaps/abstractkb/keymap.c index 4af086df3a..637a7e0440 100644 --- a/keyboards/keebio/bfo9000/keymaps/abstractkb/keymap.c +++ b/keyboards/keebio/bfo9000/keymaps/abstractkb/keymap.c @@ -56,12 +56,13 @@ layer_state_t layer_state_set_user(layer_state_t state) { return state; } -void led_set_user(uint8_t usb_led) { - if (usb_led & (1<<USB_LED_CAPS_LOCK)) { +bool led_update_user(led_t led_state) { + if (led_state.caps_lock) { rgblight_mode_noeeprom(RGBLIGHT_MODE_ALTERNATING); } else { layer_state_set_user(layer_state); } + return false; } void myrgb_toggle(void) { diff --git a/keyboards/keebio/cepstrum/rev1/config.h b/keyboards/keebio/cepstrum/rev1/config.h index 91e31d2caa..3ca3bef344 100644 --- a/keyboards/keebio/cepstrum/rev1/config.h +++ b/keyboards/keebio/cepstrum/rev1/config.h @@ -56,7 +56,6 @@ #define RGB_MATRIX_MAXIMUM_BRIGHTNESS 120 #define RGB_MATRIX_DEFAULT_VAL RGB_MATRIX_MAXIMUM_BRIGHTNESS -#define WS2812_DI_PIN GP18 #define RGB_MATRIX_LED_COUNT 96 #define RGB_DISABLE_WHEN_USB_SUSPENDED #define RGB_MATRIX_FRAMEBUFFER_EFFECTS diff --git a/keyboards/keebio/cepstrum/rev1/info.json b/keyboards/keebio/cepstrum/rev1/info.json index 75cbd41bd3..df98f9f12e 100644 --- a/keyboards/keebio/cepstrum/rev1/info.json +++ b/keyboards/keebio/cepstrum/rev1/info.json @@ -120,6 +120,9 @@ ] } }, + "ws2812": { + "pin": "GP18" + }, "rgb_matrix": { "driver": "WS2812", "split_count": [48, 48], diff --git a/keyboards/keebio/choconum/rules.mk b/keyboards/keebio/choconum/rules.mk index f3805c2acc..67d4dee2c7 100644 --- a/keyboards/keebio/choconum/rules.mk +++ b/keyboards/keebio/choconum/rules.mk @@ -11,5 +11,3 @@ BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow AUDIO_ENABLE = no # Audio output -# Enter lower-power sleep mode when on the ChibiOS idle thread -OPT_DEFS += -DCORTEX_ENABLE_WFI_IDLE=TRUE diff --git a/keyboards/keebio/chocopad/config.h b/keyboards/keebio/chocopad/config.h index 14c93278a6..d702489ee7 100644 --- a/keyboards/keebio/chocopad/config.h +++ b/keyboards/keebio/chocopad/config.h @@ -16,7 +16,3 @@ #define RGBLIGHT_EFFECT_RGB_TEST #define RGBLIGHT_EFFECT_ALTERNATING #define RGBLIGHT_EFFECT_TWINKLE -#define RGBLIGHT_HUE_STEP 8 -#define RGBLIGHT_SAT_STEP 8 -#define RGBLIGHT_VAL_STEP 8 -#define RGBLED_NUM 4 diff --git a/keyboards/keebio/chocopad/info.json b/keyboards/keebio/chocopad/info.json index 44d846da74..4516028399 100644 --- a/keyboards/keebio/chocopad/info.json +++ b/keyboards/keebio/chocopad/info.json @@ -17,6 +17,11 @@ "pin": "B5", "levels": 6 }, + "rgblight": { + "saturation_steps": 8, + "brightness_steps": 8, + "led_count": 4 + }, "ws2812": { "pin": "D3" }, diff --git a/keyboards/keebio/dilly/config.h b/keyboards/keebio/dilly/config.h index b2727f1ab2..d702489ee7 100644 --- a/keyboards/keebio/dilly/config.h +++ b/keyboards/keebio/dilly/config.h @@ -16,8 +16,3 @@ #define RGBLIGHT_EFFECT_RGB_TEST #define RGBLIGHT_EFFECT_ALTERNATING #define RGBLIGHT_EFFECT_TWINKLE -#define RGBLIGHT_HUE_STEP 8 -#define RGBLIGHT_SAT_STEP 8 -#define RGBLIGHT_VAL_STEP 8 - -#define RGBLED_NUM 10 diff --git a/keyboards/keebio/dilly/info.json b/keyboards/keebio/dilly/info.json index 29322a8044..d14b33f0bf 100644 --- a/keyboards/keebio/dilly/info.json +++ b/keyboards/keebio/dilly/info.json @@ -16,6 +16,11 @@ "backlight": { "pin": "B5" }, + "rgblight": { + "saturation_steps": 8, + "brightness_steps": 8, + "led_count": 10 + }, "ws2812": { "pin": "D3" }, diff --git a/keyboards/keebio/dsp40/rev1/config.h b/keyboards/keebio/dsp40/rev1/config.h index 7e6c613ebd..b832d5ee66 100644 --- a/keyboards/keebio/dsp40/rev1/config.h +++ b/keyboards/keebio/dsp40/rev1/config.h @@ -16,17 +16,10 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #pragma once -#define TAP_CODE_DELAY 10 - #define BACKLIGHT_PWM_DRIVER PWMD3 #define BACKLIGHT_PWM_CHANNEL 1 #define BACKLIGHT_PAL_MODE 1 - #define RGBLED_NUM 4 - #define RGBLIGHT_HUE_STEP 8 - #define RGBLIGHT_SAT_STEP 8 - #define RGBLIGHT_VAL_STEP 8 - #define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */ #define RGBLIGHT_EFFECT_BREATHING #define RGBLIGHT_EFFECT_RAINBOW_MOOD #define RGBLIGHT_EFFECT_RAINBOW_SWIRL diff --git a/keyboards/keebio/dsp40/rev1/info.json b/keyboards/keebio/dsp40/rev1/info.json index efb1bc9551..7a2ad6cf7e 100644 --- a/keyboards/keebio/dsp40/rev1/info.json +++ b/keyboards/keebio/dsp40/rev1/info.json @@ -18,10 +18,19 @@ {"pin_a": "A1", "pin_b": "A2"} ] }, + "qmk": { + "tap_keycode_delay": 10 + }, "backlight": { "pin": "A6", "levels": 7 }, + "rgblight": { + "saturation_steps": 8, + "brightness_steps": 8, + "led_count": 4, + "sleep": true + }, "ws2812": { "pin": "D3" }, diff --git a/keyboards/keebio/encoder_actions.c b/keyboards/keebio/encoder_actions.c deleted file mode 100644 index b02881de5f..0000000000 --- a/keyboards/keebio/encoder_actions.c +++ /dev/null @@ -1,63 +0,0 @@ -/* Copyright 2020 Neil Brian Ramirez - * Copyright 2021 drashna jael're (@drashna) - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 3 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see <http://www.gnu.org/licenses/>. - */ - -#include "encoder_actions.h" - -#if defined(ENCODER_ENABLE) -static uint8_t encoder_state[NUM_ENCODERS] = {0}; -static keypos_t encoder_cw[NUM_ENCODERS] = ENCODERS_CW_KEY; -static keypos_t encoder_ccw[NUM_ENCODERS] = ENCODERS_CCW_KEY; - -void encoder_action_unregister(void) { - for (int index = 0; index < NUM_ENCODERS; ++index) { - if (encoder_state[index]) { - keyevent_t encoder_event = (keyevent_t) { - .key = encoder_state[index] >> 1 ? encoder_cw[index] : encoder_ccw[index], - .pressed = false, - .time = timer_read(), - .type = KEY_EVENT - }; - encoder_state[index] = 0; - action_exec(encoder_event); - } - } -} - -void encoder_action_register(uint8_t index, bool clockwise) { - keyevent_t encoder_event = (keyevent_t) { - .key = clockwise ? encoder_cw[index] : encoder_ccw[index], - .pressed = true, - .time = timer_read(), - .type = KEY_EVENT - }; - encoder_state[index] = (clockwise ^ 1) | (clockwise << 1); - action_exec(encoder_event); -} - -void matrix_scan_kb(void) { - encoder_action_unregister(); - matrix_scan_user(); -} - -bool encoder_update_kb(uint8_t index, bool clockwise) { - encoder_action_register(index, clockwise); - // don't return user actions, because they are in the keymap - // encoder_update_user(index, clockwise); - return true; -}; - -#endif diff --git a/keyboards/keebio/encoder_actions.h b/keyboards/keebio/encoder_actions.h deleted file mode 100644 index 1a7fb72014..0000000000 --- a/keyboards/keebio/encoder_actions.h +++ /dev/null @@ -1,23 +0,0 @@ -/* Copyright 2020 Neil Brian Ramirez - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 3 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see <http://www.gnu.org/licenses/>. - */ - -#pragma once - -#include "quantum.h" - -void encoder_action_unregister(void); - -void encoder_action_register(uint8_t index, bool clockwise); diff --git a/keyboards/keebio/ergodicity/config.h b/keyboards/keebio/ergodicity/config.h index c423ca19aa..50cb99f051 100644 --- a/keyboards/keebio/ergodicity/config.h +++ b/keyboards/keebio/ergodicity/config.h @@ -17,11 +17,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #pragma once - #define RGBLED_NUM 12 - #define RGBLIGHT_HUE_STEP 8 - #define RGBLIGHT_SAT_STEP 8 - #define RGBLIGHT_VAL_STEP 8 - #define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */ #define RGBLIGHT_EFFECT_BREATHING #define RGBLIGHT_EFFECT_RAINBOW_MOOD #define RGBLIGHT_EFFECT_RAINBOW_SWIRL diff --git a/keyboards/keebio/ergodicity/info.json b/keyboards/keebio/ergodicity/info.json index c6a9f2d6a3..db963340d4 100644 --- a/keyboards/keebio/ergodicity/info.json +++ b/keyboards/keebio/ergodicity/info.json @@ -18,6 +18,12 @@ "levels": 7, "breathing": true }, + "rgblight": { + "saturation_steps": 8, + "brightness_steps": 8, + "led_count": 12, + "sleep": true + }, "ws2812": { "pin": "B2" }, diff --git a/keyboards/keebio/foldkb/rev1/config.h b/keyboards/keebio/foldkb/rev1/config.h index 30154273b7..f162dd2f10 100644 --- a/keyboards/keebio/foldkb/rev1/config.h +++ b/keyboards/keebio/foldkb/rev1/config.h @@ -34,7 +34,4 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #define RGBLIGHT_EFFECT_RGB_TEST #define RGBLIGHT_EFFECT_ALTERNATING #define RGBLIGHT_EFFECT_TWINKLE -#define RGBLED_NUM 16 // Number of LEDs -#define RGBLED_SPLIT { 8, 8 } -#define RGBLIGHT_LED_MAP { 0, 1, 2, 3, 12, 13, 14, 15, 4, 5, 6, 7, 8, 9, 10, 11 } #define RGBLIGHT_DEFAULT_MODE (RGBLIGHT_MODE_RAINBOW_SWIRL + 2) diff --git a/keyboards/keebio/foldkb/rev1/info.json b/keyboards/keebio/foldkb/rev1/info.json index e17389cc2c..c680785933 100644 --- a/keyboards/keebio/foldkb/rev1/info.json +++ b/keyboards/keebio/foldkb/rev1/info.json @@ -24,6 +24,11 @@ "split": { "soft_serial_pin": "D0" }, + "rgblight": { + "led_count": 16, + "led_map": [0, 1, 2, 3, 12, 13, 14, 15, 4, 5, 6, 7, 8, 9, 10, 11], + "split_count": [8, 8] + }, "ws2812": { "pin": "E6" }, diff --git a/keyboards/keebio/fourier/config.h b/keyboards/keebio/fourier/config.h index 904658ff8a..44286c7817 100644 --- a/keyboards/keebio/fourier/config.h +++ b/keyboards/keebio/fourier/config.h @@ -37,8 +37,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #define RGBLIGHT_EFFECT_RGB_TEST #define RGBLIGHT_EFFECT_ALTERNATING #define RGBLIGHT_EFFECT_TWINKLE -#define RGBLED_NUM 14 // Number of LEDs -#define RGBLED_SPLIT { 7, 7 } /* * Feature disable options diff --git a/keyboards/keebio/fourier/info.json b/keyboards/keebio/fourier/info.json index a9b37bda00..9f2147ca24 100644 --- a/keyboards/keebio/fourier/info.json +++ b/keyboards/keebio/fourier/info.json @@ -22,6 +22,10 @@ "split": { "soft_serial_pin": "D0" }, + "rgblight": { + "led_count": 14, + "split_count": [7, 7] + }, "ws2812": { "pin": "D3" }, diff --git a/keyboards/keebio/iris/keymaps/nstickney/keymap.c b/keyboards/keebio/iris/keymaps/nstickney/keymap.c index cc4c5bf375..cf53ffd934 100644 --- a/keyboards/keebio/iris/keymaps/nstickney/keymap.c +++ b/keyboards/keebio/iris/keymaps/nstickney/keymap.c @@ -27,11 +27,11 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { ), [SYMB] = LAYOUT( - _______, XP(IEX, SS1), X(SS2), X(SS3), XP(CUR, GBP), X(EUR), X(V14), X(V12), X(V34), XP(LSQ, LDQ), XP(RSQ, RDQ), _______, - _______, XP(A_D, AXD), XP(A_R, ACR), XP(E_A, ECA), XP(REG, CPL), X(THR), XP(U_D, UCD), XP(U_A, UCA), XP(I_A, ICA), XP(O_A, OCA), XP(O_D, OCD), _______, - _______, XP(A_A, ACA), XP(S_S, SEC), XP(ETH, ETC), X(EMD), _______, _______, _______, _______, XP(O_S, OCS), XP(PLC, DEG), XP(ACT, DIS), - _______, XP(AEL, AEC), _______, XP(CPR, CNT), _______, _______, _______, _______, XP(N_T, NCT), X(MCR), XP(C_C, CCC), _______, _______, _______, - X(IQM), XP(NOT, BKB), _______, _______, X(YEN), XP(MLT, DIV) + _______, UP(IEX, SS1), UM(SS2), UM(SS3), UP(CUR, GBP), UM(EUR), UM(V14), UM(V12), UM(V34), UP(LSQ, LDQ), UP(RSQ, RDQ), _______, + _______, UP(A_D, AXD), UP(A_R, ACR), UP(E_A, ECA), UP(REG, CPL), UM(THR), UP(U_D, UCD), UP(U_A, UCA), UP(I_A, ICA), UP(O_A, OCA), UP(O_D, OCD), _______, + _______, UP(A_A, ACA), UP(S_S, SEC), UP(ETH, ETC), UM(EMD), _______, _______, _______, _______, UP(O_S, OCS), UP(PLC, DEG), UP(ACT, DIS), + _______, UP(AEL, AEC), _______, UP(CPR, CNT), _______, _______, _______, _______, UP(N_T, NCT), UM(MCR), UP(C_C, CCC), _______, _______, _______, + UM(IQM), UP(NOT, BKB), _______, _______, UM(YEN), UP(MLT, DIV) ), [NUMP] = LAYOUT( diff --git a/keyboards/keebio/iris/rev1/config.h b/keyboards/keebio/iris/rev1/config.h index 7fd5c0ff95..ec1e07d8fb 100644 --- a/keyboards/keebio/iris/rev1/config.h +++ b/keyboards/keebio/iris/rev1/config.h @@ -23,7 +23,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #define LOCKING_RESYNC_ENABLE /* ws2812 RGB LED */ -#define RGBLED_NUM 12 // Number of LEDs #define RGBLIGHT_EFFECT_BREATHING #define RGBLIGHT_EFFECT_RAINBOW_MOOD #define RGBLIGHT_EFFECT_RAINBOW_SWIRL diff --git a/keyboards/keebio/iris/rev1/info.json b/keyboards/keebio/iris/rev1/info.json index af3c7acd42..a389e7ae09 100644 --- a/keyboards/keebio/iris/rev1/info.json +++ b/keyboards/keebio/iris/rev1/info.json @@ -16,6 +16,9 @@ "split": { "soft_serial_pin": "D0" }, + "rgblight": { + "led_count": 12 + }, "ws2812": { "pin": "D3" }, diff --git a/keyboards/keebio/iris/rev1_led/config.h b/keyboards/keebio/iris/rev1_led/config.h index 7fd5c0ff95..ec1e07d8fb 100644 --- a/keyboards/keebio/iris/rev1_led/config.h +++ b/keyboards/keebio/iris/rev1_led/config.h @@ -23,7 +23,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #define LOCKING_RESYNC_ENABLE /* ws2812 RGB LED */ -#define RGBLED_NUM 12 // Number of LEDs #define RGBLIGHT_EFFECT_BREATHING #define RGBLIGHT_EFFECT_RAINBOW_MOOD #define RGBLIGHT_EFFECT_RAINBOW_SWIRL diff --git a/keyboards/keebio/iris/rev1_led/info.json b/keyboards/keebio/iris/rev1_led/info.json index bc19a0cc8b..0be141b00f 100644 --- a/keyboards/keebio/iris/rev1_led/info.json +++ b/keyboards/keebio/iris/rev1_led/info.json @@ -16,6 +16,9 @@ "split": { "soft_serial_pin": "D0" }, + "rgblight": { + "led_count": 12 + }, "ws2812": { "pin": "D3" }, diff --git a/keyboards/keebio/iris/rev2/config.h b/keyboards/keebio/iris/rev2/config.h index 59867e6ef9..ec1e07d8fb 100644 --- a/keyboards/keebio/iris/rev2/config.h +++ b/keyboards/keebio/iris/rev2/config.h @@ -23,8 +23,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #define LOCKING_RESYNC_ENABLE /* ws2812 RGB LED */ -#define RGBLED_NUM 12 // Number of LEDs -#define RGBLED_SPLIT { 6, 6 } #define RGBLIGHT_EFFECT_BREATHING #define RGBLIGHT_EFFECT_RAINBOW_MOOD #define RGBLIGHT_EFFECT_RAINBOW_SWIRL diff --git a/keyboards/keebio/iris/rev2/info.json b/keyboards/keebio/iris/rev2/info.json index 80e65aa8e2..f9c025f9ce 100644 --- a/keyboards/keebio/iris/rev2/info.json +++ b/keyboards/keebio/iris/rev2/info.json @@ -16,6 +16,10 @@ "split": { "soft_serial_pin": "D0" }, + "rgblight": { + "led_count": 12, + "split_count": [6, 6] + }, "ws2812": { "pin": "D3" }, diff --git a/keyboards/keebio/iris/rev3/config.h b/keyboards/keebio/iris/rev3/config.h index c7a7222fdc..9c0c7e07c7 100644 --- a/keyboards/keebio/iris/rev3/config.h +++ b/keyboards/keebio/iris/rev3/config.h @@ -25,8 +25,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #define LOCKING_RESYNC_ENABLE /* ws2812 RGB LED */ -#define RGBLED_NUM 12 // Number of LEDs -#define RGBLED_SPLIT { 6, 6 } #define RGBLIGHT_EFFECT_BREATHING #define RGBLIGHT_EFFECT_RAINBOW_MOOD #define RGBLIGHT_EFFECT_RAINBOW_SWIRL diff --git a/keyboards/keebio/iris/rev3/info.json b/keyboards/keebio/iris/rev3/info.json index adc4b71354..8c188a9620 100644 --- a/keyboards/keebio/iris/rev3/info.json +++ b/keyboards/keebio/iris/rev3/info.json @@ -18,6 +18,10 @@ "pin": "B6", "levels": 5 }, + "rgblight": { + "led_count": 12, + "split_count": [6, 6] + }, "ws2812": { "pin": "F7" }, diff --git a/keyboards/keebio/iris/rev4/config.h b/keyboards/keebio/iris/rev4/config.h index eaeca3a4b9..e5b7a7633e 100644 --- a/keyboards/keebio/iris/rev4/config.h +++ b/keyboards/keebio/iris/rev4/config.h @@ -25,8 +25,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #define LOCKING_RESYNC_ENABLE /* ws2812 RGB LED */ -#define RGBLED_NUM 12 // Number of LEDs -#define RGBLED_SPLIT { 6, 6 } #define RGBLIGHT_EFFECT_BREATHING #define RGBLIGHT_EFFECT_RAINBOW_MOOD #define RGBLIGHT_EFFECT_RAINBOW_SWIRL diff --git a/keyboards/keebio/iris/rev4/info.json b/keyboards/keebio/iris/rev4/info.json index 6ddb257d21..4ba2f6e193 100644 --- a/keyboards/keebio/iris/rev4/info.json +++ b/keyboards/keebio/iris/rev4/info.json @@ -18,6 +18,10 @@ "pin": "B5", "levels": 5 }, + "rgblight": { + "led_count": 12, + "split_count": [6, 6] + }, "ws2812": { "pin": "D6" }, diff --git a/keyboards/keebio/iris/rev5/config.h b/keyboards/keebio/iris/rev5/config.h index 12ff3a2a4d..7bfc3e8ff8 100644 --- a/keyboards/keebio/iris/rev5/config.h +++ b/keyboards/keebio/iris/rev5/config.h @@ -22,8 +22,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #define BACKLIGHT_DEFAULT_LEVEL 3 /* ws2812 RGB LED */ -#define RGBLED_NUM 12 // Number of LEDs -#define RGBLED_SPLIT { 6, 6 } #define RGBLIGHT_EFFECT_BREATHING #define RGBLIGHT_EFFECT_RAINBOW_MOOD #define RGBLIGHT_EFFECT_RAINBOW_SWIRL diff --git a/keyboards/keebio/iris/rev5/info.json b/keyboards/keebio/iris/rev5/info.json index 98c0d3bf2d..30e5c6f999 100644 --- a/keyboards/keebio/iris/rev5/info.json +++ b/keyboards/keebio/iris/rev5/info.json @@ -18,6 +18,10 @@ "pin": "B5", "levels": 5 }, + "rgblight": { + "led_count": 12, + "split_count": [6, 6] + }, "ws2812": { "pin": "D6" }, diff --git a/keyboards/keebio/iris/rev6/config.h b/keyboards/keebio/iris/rev6/config.h index 79f92b75a9..e94cce1ab5 100644 --- a/keyboards/keebio/iris/rev6/config.h +++ b/keyboards/keebio/iris/rev6/config.h @@ -20,12 +20,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #define SPLIT_HAND_PIN D5 /* ws2812 RGB LED */ -# define RGBLED_NUM 68 -# define RGBLED_SPLIT { 34, 34 } -# define RGBLIGHT_HUE_STEP 8 -# define RGBLIGHT_SAT_STEP 8 -# define RGBLIGHT_VAL_STEP 8 -# define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */ /*== enabled animations ==*/ # define RGBLIGHT_EFFECT_BREATHING # define RGBLIGHT_EFFECT_RAINBOW_MOOD @@ -80,7 +74,7 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. # define ENABLE_RGB_MATRIX_SOLID_MULTISPLASH # define RGB_MATRIX_MAXIMUM_BRIGHTNESS 160 # define RGB_MATRIX_DEFAULT_VAL RGB_MATRIX_MAXIMUM_BRIGHTNESS -# define RGB_MATRIX_LED_COUNT RGBLED_NUM +# define RGB_MATRIX_LED_COUNT 68 # define RGB_MATRIX_SPLIT { 34, 34 } # define RGB_DISABLE_WHEN_USB_SUSPENDED # define RGB_MATRIX_KEYPRESSES diff --git a/keyboards/keebio/iris/rev6/info.json b/keyboards/keebio/iris/rev6/info.json index 632b5f10d8..c2e1d2158d 100644 --- a/keyboards/keebio/iris/rev6/info.json +++ b/keyboards/keebio/iris/rev6/info.json @@ -21,7 +21,12 @@ "pin": "E6" }, "rgblight": { - "max_brightness": 120 + "saturation_steps": 8, + "brightness_steps": 8, + "led_count": 68, + "max_brightness": 120, + "sleep": true, + "split_count": [34, 34] }, "split": { "soft_serial_pin": "D0", diff --git a/keyboards/keebio/iris/rev7/config.h b/keyboards/keebio/iris/rev7/config.h index dd4284cb9b..e83396907a 100644 --- a/keyboards/keebio/iris/rev7/config.h +++ b/keyboards/keebio/iris/rev7/config.h @@ -20,12 +20,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #define SPLIT_HAND_PIN D5 /* ws2812 RGB LED */ -# define RGBLED_NUM 68 -# define RGBLED_SPLIT { 34, 34 } -# define RGBLIGHT_HUE_STEP 8 -# define RGBLIGHT_SAT_STEP 8 -# define RGBLIGHT_VAL_STEP 8 -# define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */ /*== enabled animations ==*/ # define RGBLIGHT_EFFECT_BREATHING # define RGBLIGHT_EFFECT_RAINBOW_MOOD @@ -80,7 +74,7 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. //# define ENABLE_RGB_MATRIX_SOLID_MULTISPLASH # define RGB_MATRIX_MAXIMUM_BRIGHTNESS 120 # define RGB_MATRIX_DEFAULT_VAL RGB_MATRIX_MAXIMUM_BRIGHTNESS -# define RGB_MATRIX_LED_COUNT RGBLED_NUM +# define RGB_MATRIX_LED_COUNT 68 # define RGB_MATRIX_SPLIT { 34, 34 } # define RGB_DISABLE_WHEN_USB_SUSPENDED # define RGB_MATRIX_KEYPRESSES diff --git a/keyboards/keebio/iris/rev7/info.json b/keyboards/keebio/iris/rev7/info.json index 7ed57fb873..aa8e4ffc43 100644 --- a/keyboards/keebio/iris/rev7/info.json +++ b/keyboards/keebio/iris/rev7/info.json @@ -22,7 +22,12 @@ "pin": "E6" }, "rgblight": { - "max_brightness": 120 + "saturation_steps": 8, + "brightness_steps": 8, + "led_count": 68, + "max_brightness": 120, + "sleep": true, + "split_count": [34, 34] }, "split": { "soft_serial_pin": "D0", diff --git a/keyboards/keebio/kbo5000/rev1/config.h b/keyboards/keebio/kbo5000/rev1/config.h index f02c15c4a7..0771ad9e25 100644 --- a/keyboards/keebio/kbo5000/rev1/config.h +++ b/keyboards/keebio/kbo5000/rev1/config.h @@ -38,6 +38,3 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #define RGBLIGHT_EFFECT_RGB_TEST #define RGBLIGHT_EFFECT_ALTERNATING #define RGBLIGHT_EFFECT_TWINKLE -#define RGBLED_NUM 16 // Number of LEDs -#define RGBLED_SPLIT { 8, 8 } -#define RGBLIGHT_LED_MAP { 1, 2, 3, 12, 13, 14, 15, 0, 7, 6, 5, 4, 11, 10, 9, 8 } diff --git a/keyboards/keebio/kbo5000/rev1/info.json b/keyboards/keebio/kbo5000/rev1/info.json index d40c12b52d..fd93ad86d5 100644 --- a/keyboards/keebio/kbo5000/rev1/info.json +++ b/keyboards/keebio/kbo5000/rev1/info.json @@ -21,6 +21,11 @@ "backlight": { "pin": "B5" }, + "rgblight": { + "led_count": 16, + "led_map": [1, 2, 3, 12, 13, 14, 15, 0, 7, 6, 5, 4, 11, 10, 9, 8], + "split_count": [8, 8] + }, "ws2812": { "pin": "E6" }, diff --git a/keyboards/keebio/laplace/config.h b/keyboards/keebio/laplace/config.h index 93ef4c9130..e80e1f3d58 100644 --- a/keyboards/keebio/laplace/config.h +++ b/keyboards/keebio/laplace/config.h @@ -28,6 +28,3 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #define RGBLIGHT_EFFECT_RGB_TEST #define RGBLIGHT_EFFECT_ALTERNATING #define RGBLIGHT_EFFECT_TWINKLE -#define RGBLED_NUM 14 - -#define TAPPING_TERM 200 diff --git a/keyboards/keebio/laplace/info.json b/keyboards/keebio/laplace/info.json index 1899e88236..5fd29b1fbe 100644 --- a/keyboards/keebio/laplace/info.json +++ b/keyboards/keebio/laplace/info.json @@ -8,6 +8,9 @@ "pid": "0x1147", "device_version": "1.0.0" }, + "rgblight": { + "led_count": 14 + }, "ws2812": { "pin": "D4" }, diff --git a/keyboards/keebio/levinson/rev1/config.h b/keyboards/keebio/levinson/rev1/config.h index b1922fb9c3..2fd8b7d4d0 100644 --- a/keyboards/keebio/levinson/rev1/config.h +++ b/keyboards/keebio/levinson/rev1/config.h @@ -23,7 +23,3 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #define LOCKING_SUPPORT_ENABLE /* Locking resynchronize hack */ #define LOCKING_RESYNC_ENABLE - -/* ws2812 RGB LED */ -#define RGBLED_NUM 12 // Number of LEDs -#define RGBLED_SPLIT { 6, 6 } diff --git a/keyboards/keebio/levinson/rev1/info.json b/keyboards/keebio/levinson/rev1/info.json index c23887a49f..0a98e032d4 100644 --- a/keyboards/keebio/levinson/rev1/info.json +++ b/keyboards/keebio/levinson/rev1/info.json @@ -16,6 +16,10 @@ "pin": "C6", "levels": 7 }, + "rgblight": { + "led_count": 12, + "split_count": [6, 6] + }, "ws2812": { "pin": "D3" }, diff --git a/keyboards/keebio/levinson/rev2/config.h b/keyboards/keebio/levinson/rev2/config.h index b1922fb9c3..2fd8b7d4d0 100644 --- a/keyboards/keebio/levinson/rev2/config.h +++ b/keyboards/keebio/levinson/rev2/config.h @@ -23,7 +23,3 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #define LOCKING_SUPPORT_ENABLE /* Locking resynchronize hack */ #define LOCKING_RESYNC_ENABLE - -/* ws2812 RGB LED */ -#define RGBLED_NUM 12 // Number of LEDs -#define RGBLED_SPLIT { 6, 6 } diff --git a/keyboards/keebio/levinson/rev2/info.json b/keyboards/keebio/levinson/rev2/info.json index aab339166e..962f555e12 100644 --- a/keyboards/keebio/levinson/rev2/info.json +++ b/keyboards/keebio/levinson/rev2/info.json @@ -16,6 +16,10 @@ "pin": "B5", "levels": 7 }, + "rgblight": { + "led_count": 12, + "split_count": [6, 6] + }, "ws2812": { "pin": "D3" }, diff --git a/keyboards/keebio/levinson/rev3/config.h b/keyboards/keebio/levinson/rev3/config.h index d2e19703c1..e1c73cd56e 100644 --- a/keyboards/keebio/levinson/rev3/config.h +++ b/keyboards/keebio/levinson/rev3/config.h @@ -25,7 +25,3 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #define LOCKING_SUPPORT_ENABLE /* Locking resynchronize hack */ #define LOCKING_RESYNC_ENABLE - -/* ws2812 RGB LED */ -#define RGBLED_NUM 12 // Number of LEDs -#define RGBLED_SPLIT { 6, 6 } diff --git a/keyboards/keebio/levinson/rev3/info.json b/keyboards/keebio/levinson/rev3/info.json index e5e479ba7a..cac1c3ac35 100644 --- a/keyboards/keebio/levinson/rev3/info.json +++ b/keyboards/keebio/levinson/rev3/info.json @@ -22,6 +22,10 @@ "pin": "B6", "levels": 7 }, + "rgblight": { + "led_count": 12, + "split_count": [6, 6] + }, "ws2812": { "pin": "D7" }, diff --git a/keyboards/keebio/nyquist/keymaps/bramver/keymap.c b/keyboards/keebio/nyquist/keymaps/bramver/keymap.c index 04433c41cd..4518cb326d 100644 --- a/keyboards/keebio/nyquist/keymaps/bramver/keymap.c +++ b/keyboards/keebio/nyquist/keymaps/bramver/keymap.c @@ -232,9 +232,9 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { [_EMOJI] = LAYOUT( TO(0) , XXXXXXX , XXXXXXX , XXXXXXX , XXXXXXX , XXXXXXX , /**/ QK_BOOT , XXXXXXX , XXXXXXX , XXXXXXX , XXXXXXX , _______ , - _______ , X(CLAP) , X(CUM) , X(BNIS) , X(BUTT) , X(CAR) , /**/ X(FIRE) , X(REDB) , X(MONY) , X(HNDR) , X(SOS) , _______ , - XXXXXXX , X(CELE) , X(PRAY) , X(NAIL) , X(OK) , X(THNK) , /**/ X(UNAM) , X(HEYE) , X(COOL) , X(EYES) , X(SMIR) , KC_DEL , - _______ , X(TRIU) , X(SCRM) , X(VOMI) , X(DTIV) , X(EXPL) , /**/ X(HAIR) , X(DANC) , X(STRN) , X(LEFT) , X(RGHT) , _______ , + _______ , UM(CLAP) , UM(CUM) , UM(BNIS) , UM(BUTT) , UM(CAR) , /**/ UM(FIRE) , UM(REDB) , UM(MONY) , UM(HNDR) , UM(SOS) , _______ , + XXXXXXX , UM(CELE) , UM(PRAY) , UM(NAIL) , UM(OK) , UM(THNK) , /**/ UM(UNAM) , UM(HEYE) , UM(COOL) , UM(EYES) , UM(SMIR) , KC_DEL , + _______ , UM(TRIU) , UM(SCRM) , UM(VOMI) , UM(DTIV) , UM(EXPL) , /**/ UM(HAIR) , UM(DANC) , UM(STRN) , UM(LEFT) , UM(RGHT) , _______ , _______ , _______ , _______ , _______ , _______ , XXXXXXX , /**/ XXXXXXX , _______ , _______ , _______ , XXXXXXX , _______ ), diff --git a/keyboards/keebio/nyquist/rev1/config.h b/keyboards/keebio/nyquist/rev1/config.h index ab1c967e70..6fdc15c582 100644 --- a/keyboards/keebio/nyquist/rev1/config.h +++ b/keyboards/keebio/nyquist/rev1/config.h @@ -22,10 +22,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. /* Locking resynchronize hack */ #define LOCKING_RESYNC_ENABLE -/* ws2812 RGB LED */ -#define RGBLED_NUM 12 -#define RGBLED_SPLIT { 6, 6 } - /* * Feature disable options * These options are also useful to firmware size reduction. diff --git a/keyboards/keebio/nyquist/rev1/info.json b/keyboards/keebio/nyquist/rev1/info.json index 64d613dccf..cd729aa87b 100644 --- a/keyboards/keebio/nyquist/rev1/info.json +++ b/keyboards/keebio/nyquist/rev1/info.json @@ -12,6 +12,10 @@ "split": { "soft_serial_pin": "D0" }, + "rgblight": { + "led_count": 12, + "split_count": [6, 6] + }, "ws2812": { "pin": "D3" }, diff --git a/keyboards/keebio/nyquist/rev2/config.h b/keyboards/keebio/nyquist/rev2/config.h index ab1c967e70..6fdc15c582 100644 --- a/keyboards/keebio/nyquist/rev2/config.h +++ b/keyboards/keebio/nyquist/rev2/config.h @@ -22,10 +22,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. /* Locking resynchronize hack */ #define LOCKING_RESYNC_ENABLE -/* ws2812 RGB LED */ -#define RGBLED_NUM 12 -#define RGBLED_SPLIT { 6, 6 } - /* * Feature disable options * These options are also useful to firmware size reduction. diff --git a/keyboards/keebio/nyquist/rev2/info.json b/keyboards/keebio/nyquist/rev2/info.json index 05b4ea0b7e..f6b80cb946 100644 --- a/keyboards/keebio/nyquist/rev2/info.json +++ b/keyboards/keebio/nyquist/rev2/info.json @@ -13,6 +13,10 @@ "pin": "B6", "levels": 7 }, + "rgblight": { + "led_count": 12, + "split_count": [6, 6] + }, "ws2812": { "pin": "D3" }, diff --git a/keyboards/keebio/nyquist/rev3/config.h b/keyboards/keebio/nyquist/rev3/config.h index 7b014e4fc5..7e1e36bda3 100644 --- a/keyboards/keebio/nyquist/rev3/config.h +++ b/keyboards/keebio/nyquist/rev3/config.h @@ -35,8 +35,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #define RGBLIGHT_EFFECT_RGB_TEST #define RGBLIGHT_EFFECT_ALTERNATING #define RGBLIGHT_EFFECT_TWINKLE -#define RGBLED_NUM 12 -#define RGBLED_SPLIT { 6, 6 } /* * Feature disable options diff --git a/keyboards/keebio/nyquist/rev3/info.json b/keyboards/keebio/nyquist/rev3/info.json index eb17350d63..9012b3ab22 100644 --- a/keyboards/keebio/nyquist/rev3/info.json +++ b/keyboards/keebio/nyquist/rev3/info.json @@ -16,6 +16,10 @@ "split": { "soft_serial_pin": "D0" }, + "rgblight": { + "led_count": 12, + "split_count": [6, 6] + }, "ws2812": { "pin": "B4" }, diff --git a/keyboards/keebio/quefrency/keymaps/bramver/README.md b/keyboards/keebio/quefrency/keymaps/bramver/README.md index 547e2686f8..1665e4fd3e 100644 --- a/keyboards/keebio/quefrency/keymaps/bramver/README.md +++ b/keyboards/keebio/quefrency/keymaps/bramver/README.md @@ -51,9 +51,9 @@ Mostly based off of my other XD75 and Nyquist layouts. /* EMOJ * * _______ , _______ , _______ , _______ , _______ , _______ , _______ , /**/ _______ , _______ , _______ , _______ , _______ , _______ , _______ , _______ , - * _______ , X(CLAP) , X(CUM) , X(BNIS) , X(BUTT) , X(CAR) , /**/ X(FIRE) , X(REDB) , X(MONY) , X(HNDR) , X(SOS) , _______ , _______ , _______ , - * _______ , X(CELE) , X(PRAY) , X(NAIL) , X(OK) , X(THNK) , /**/ X(UNAM) , X(HEYE) , X(COOL) , X(EYES) , X(SMIR) , _______ , _______ , - * _______ , X(TRIU) , X(SCRM) , X(VOMI) , X(DTIV) , X(EXPL) , /**/ X(HAIR) , X(DANC) , X(STRN) , X(LEFT) , X(RGHT) , _______ , _______ , + * _______ , UM(CLAP) , UM(CUM) , UM(BNIS) , UM(BUTT) , UM(CAR) , /**/ UM(FIRE) , UM(REDB) , UM(MONY) , UM(HNDR) , UM(SOS) , _______ , _______ , _______ , + * _______ , UM(CELE) , UM(PRAY) , UM(NAIL) , UM(OK) , UM(THNK) , /**/ UM(UNAM) , UM(HEYE) , UM(COOL) , UM(EYES) , UM(SMIR) , _______ , _______ , + * _______ , UM(TRIU) , UM(SCRM) , UM(VOMI) , UM(DTIV) , UM(EXPL) , /**/ UM(HAIR) , UM(DANC) , UM(STRN) , UM(LEFT) , UM(RGHT) , _______ , _______ , * _______ , _______ , _______ , _______ , _______ , /**/ _______ , _______ , _______ , _______ , _______ , _______ , _______ * */ diff --git a/keyboards/keebio/quefrency/keymaps/bramver/keymap.c b/keyboards/keebio/quefrency/keymaps/bramver/keymap.c index f855425ec0..9c6729e91e 100644 --- a/keyboards/keebio/quefrency/keymaps/bramver/keymap.c +++ b/keyboards/keebio/quefrency/keymaps/bramver/keymap.c @@ -118,9 +118,9 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { [_EMOJ] = LAYOUT( _______ , _______ , _______ , _______ , _______ , _______ , _______ , _______ , _______ , _______ , _______ , _______ , _______ , _______ , _______ , - _______ , X(CLAP) , X(CUM) , X(BNIS) , X(BUTT) , X(CAR) , X(FIRE) , X(REDB) , X(MONY) , X(HNDR) , X(SOS) , _______ , _______ , _______ , - _______ , X(CELE) , X(PRAY) , X(NAIL) , X(OK) , X(THNK) , X(UNAM) , X(HEYE) , X(COOL) , X(EYES) , X(SMIR) , _______ , _______ , - _______ , X(TRIU) , X(SCRM) , X(VOMI) , X(DTIV) , X(EXPL) , X(HAIR) , X(DANC) , X(STRN) , X(LEFT) , X(RGHT) , _______ , _______ , + _______ , UM(CLAP) , UM(CUM) , UM(BNIS) , UM(BUTT) , UM(CAR) , UM(FIRE) , UM(REDB) , UM(MONY) , UM(HNDR) , UM(SOS) , _______ , _______ , _______ , + _______ , UM(CELE) , UM(PRAY) , UM(NAIL) , UM(OK) , UM(THNK) , UM(UNAM) , UM(HEYE) , UM(COOL) , UM(EYES) , UM(SMIR) , _______ , _______ , + _______ , UM(TRIU) , UM(SCRM) , UM(VOMI) , UM(DTIV) , UM(EXPL) , UM(HAIR) , UM(DANC) , UM(STRN) , UM(LEFT) , UM(RGHT) , _______ , _______ , _______ , _______ , _______ , _______ , _______ , _______ , _______ , _______ , _______ , _______ , _______ , _______ ), diff --git a/keyboards/keebio/quefrency/rev1/config.h b/keyboards/keebio/quefrency/rev1/config.h index 83fcd1fe0a..ee52660c6c 100644 --- a/keyboards/keebio/quefrency/rev1/config.h +++ b/keyboards/keebio/quefrency/rev1/config.h @@ -36,8 +36,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #define RGBLIGHT_EFFECT_RGB_TEST #define RGBLIGHT_EFFECT_ALTERNATING #define RGBLIGHT_EFFECT_TWINKLE -#define RGBLED_NUM 16 // Number of LEDs -#define RGBLED_SPLIT { 8, 8 } // Set 65% column (option 1) and Macro (option 2) on by default #define VIA_EEPROM_LAYOUT_OPTIONS_DEFAULT 0x60 diff --git a/keyboards/keebio/quefrency/rev1/info.json b/keyboards/keebio/quefrency/rev1/info.json index 7fb5ca8153..ba82cdcb2f 100644 --- a/keyboards/keebio/quefrency/rev1/info.json +++ b/keyboards/keebio/quefrency/rev1/info.json @@ -8,6 +8,10 @@ "pid": "0x1257", "device_version": "1.0.0" }, + "rgblight": { + "led_count": 16, + "split_count": [8, 8] + }, "ws2812": { "pin": "D3" }, diff --git a/keyboards/keebio/quefrency/rev2/config.h b/keyboards/keebio/quefrency/rev2/config.h index e7774432df..65b8ea7f8c 100644 --- a/keyboards/keebio/quefrency/rev2/config.h +++ b/keyboards/keebio/quefrency/rev2/config.h @@ -23,9 +23,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #define CAPS_LOCK_LED_PIN B6 /* ws2812 RGB LED */ -#define RGBLED_NUM 16 // Number of LEDs -#define RGBLED_SPLIT { 8, 8 } -#define RGBLIGHT_LED_MAP { 1, 2, 3, 12, 13, 14, 15, 0, 7, 6, 5, 4, 11, 10, 9, 8 } #define RGBLIGHT_EFFECT_BREATHING #define RGBLIGHT_EFFECT_RAINBOW_MOOD #define RGBLIGHT_EFFECT_RAINBOW_SWIRL diff --git a/keyboards/keebio/quefrency/rev2/info.json b/keyboards/keebio/quefrency/rev2/info.json index d73c1af308..c076a697f5 100644 --- a/keyboards/keebio/quefrency/rev2/info.json +++ b/keyboards/keebio/quefrency/rev2/info.json @@ -21,6 +21,11 @@ "backlight": { "pin": "B5" }, + "rgblight": { + "led_count": 16, + "led_map": [1, 2, 3, 12, 13, 14, 15, 0, 7, 6, 5, 4, 11, 10, 9, 8], + "split_count": [8, 8] + }, "ws2812": { "pin": "E6" }, diff --git a/keyboards/keebio/quefrency/rev3/config.h b/keyboards/keebio/quefrency/rev3/config.h index e7774432df..65b8ea7f8c 100644 --- a/keyboards/keebio/quefrency/rev3/config.h +++ b/keyboards/keebio/quefrency/rev3/config.h @@ -23,9 +23,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #define CAPS_LOCK_LED_PIN B6 /* ws2812 RGB LED */ -#define RGBLED_NUM 16 // Number of LEDs -#define RGBLED_SPLIT { 8, 8 } -#define RGBLIGHT_LED_MAP { 1, 2, 3, 12, 13, 14, 15, 0, 7, 6, 5, 4, 11, 10, 9, 8 } #define RGBLIGHT_EFFECT_BREATHING #define RGBLIGHT_EFFECT_RAINBOW_MOOD #define RGBLIGHT_EFFECT_RAINBOW_SWIRL diff --git a/keyboards/keebio/quefrency/rev3/info.json b/keyboards/keebio/quefrency/rev3/info.json index fb204ab910..66deb75951 100644 --- a/keyboards/keebio/quefrency/rev3/info.json +++ b/keyboards/keebio/quefrency/rev3/info.json @@ -21,6 +21,11 @@ "backlight": { "pin": "B5" }, + "rgblight": { + "led_count": 16, + "led_map": [1, 2, 3, 12, 13, 14, 15, 0, 7, 6, 5, 4, 11, 10, 9, 8], + "split_count": [8, 8] + }, "ws2812": { "pin": "E6" }, diff --git a/keyboards/keebio/quefrency/rev4/config.h b/keyboards/keebio/quefrency/rev4/config.h index b27ba56d53..abb3b8b340 100644 --- a/keyboards/keebio/quefrency/rev4/config.h +++ b/keyboards/keebio/quefrency/rev4/config.h @@ -24,9 +24,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #define LOCKING_RESYNC_ENABLE /* ws2812 RGB LED */ -#define RGBLED_NUM 16 // Number of LEDs -#define RGBLED_SPLIT { 8, 8 } -#define RGBLIGHT_LED_MAP { 1, 2, 3, 12, 13, 14, 15, 0, 7, 6, 5, 4, 11, 10, 9, 8 } #define RGBLIGHT_DEFAULT_MODE (RGBLIGHT_MODE_RAINBOW_SWIRL + 2) #define RGBLIGHT_EFFECT_BREATHING #define RGBLIGHT_EFFECT_RAINBOW_MOOD diff --git a/keyboards/keebio/quefrency/rev4/info.json b/keyboards/keebio/quefrency/rev4/info.json index 55fb4adda4..8ca39b9145 100644 --- a/keyboards/keebio/quefrency/rev4/info.json +++ b/keyboards/keebio/quefrency/rev4/info.json @@ -18,6 +18,11 @@ {"pin_a": "F5", "pin_b": "F6"} ] }, + "rgblight": { + "led_count": 16, + "led_map": [1, 2, 3, 12, 13, 14, 15, 0, 7, 6, 5, 4, 11, 10, 9, 8], + "split_count": [8, 8] + }, "ws2812": { "pin": "E6" }, diff --git a/keyboards/keebio/quefrency/rev5/config.h b/keyboards/keebio/quefrency/rev5/config.h index b27ba56d53..abb3b8b340 100644 --- a/keyboards/keebio/quefrency/rev5/config.h +++ b/keyboards/keebio/quefrency/rev5/config.h @@ -24,9 +24,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #define LOCKING_RESYNC_ENABLE /* ws2812 RGB LED */ -#define RGBLED_NUM 16 // Number of LEDs -#define RGBLED_SPLIT { 8, 8 } -#define RGBLIGHT_LED_MAP { 1, 2, 3, 12, 13, 14, 15, 0, 7, 6, 5, 4, 11, 10, 9, 8 } #define RGBLIGHT_DEFAULT_MODE (RGBLIGHT_MODE_RAINBOW_SWIRL + 2) #define RGBLIGHT_EFFECT_BREATHING #define RGBLIGHT_EFFECT_RAINBOW_MOOD diff --git a/keyboards/keebio/quefrency/rev5/info.json b/keyboards/keebio/quefrency/rev5/info.json index 78a44dfc80..f922b8cb94 100644 --- a/keyboards/keebio/quefrency/rev5/info.json +++ b/keyboards/keebio/quefrency/rev5/info.json @@ -18,6 +18,11 @@ {"pin_a": "F5", "pin_b": "F6"} ] }, + "rgblight": { + "led_count": 16, + "led_map": [1, 2, 3, 12, 13, 14, 15, 0, 7, 6, 5, 4, 11, 10, 9, 8], + "split_count": [8, 8] + }, "ws2812": { "pin": "E6" }, diff --git a/keyboards/keebio/rorschach/rev1/config.h b/keyboards/keebio/rorschach/rev1/config.h index 979899d547..abfd454fa9 100644 --- a/keyboards/keebio/rorschach/rev1/config.h +++ b/keyboards/keebio/rorschach/rev1/config.h @@ -33,7 +33,3 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #define RGBLIGHT_EFFECT_RGB_TEST #define RGBLIGHT_EFFECT_ALTERNATING #define RGBLIGHT_EFFECT_TWINKLE -#define RGBLED_NUM 12 -#define RGBLIGHT_HUE_STEP 8 -#define RGBLIGHT_SAT_STEP 8 -#define RGBLIGHT_VAL_STEP 8 diff --git a/keyboards/keebio/rorschach/rev1/info.json b/keyboards/keebio/rorschach/rev1/info.json index a0b1188a7c..e6d0e4471b 100644 --- a/keyboards/keebio/rorschach/rev1/info.json +++ b/keyboards/keebio/rorschach/rev1/info.json @@ -17,6 +17,11 @@ "pin": "B5", "levels": 5 }, + "rgblight": { + "saturation_steps": 8, + "brightness_steps": 8, + "led_count": 12 + }, "ws2812": { "pin": "D3" }, diff --git a/keyboards/keebio/sinc/rev1/config.h b/keyboards/keebio/sinc/rev1/config.h index c394777a8f..8894354d43 100644 --- a/keyboards/keebio/sinc/rev1/config.h +++ b/keyboards/keebio/sinc/rev1/config.h @@ -26,8 +26,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. /* Synchronize Caps Lock LED across halves */ #define SPLIT_LED_STATE_ENABLE -/* ws2812 RGB LED */ -#define RGBLIGHT_LED_MAP { 1, 2, 3, 12, 13, 14, 15, 0, 7, 6, 5, 4, 11, 10, 9, 8 } #define RGBLIGHT_DEFAULT_MODE (RGBLIGHT_MODE_RAINBOW_SWIRL + 2) #define VIA_EEPROM_LAYOUT_OPTIONS_SIZE 2 diff --git a/keyboards/keebio/sinc/rev1/info.json b/keyboards/keebio/sinc/rev1/info.json index d9b09568bd..5ddb54ee60 100644 --- a/keyboards/keebio/sinc/rev1/info.json +++ b/keyboards/keebio/sinc/rev1/info.json @@ -49,6 +49,7 @@ }, "rgblight": { "led_count": 16, + "led_map": [1, 2, 3, 12, 13, 14, 15, 0, 7, 6, 5, 4, 11, 10, 9, 8], "split_count": [8, 8], "animations": { "alternating": true, diff --git a/keyboards/keebio/sinc/rev2/config.h b/keyboards/keebio/sinc/rev2/config.h index c394777a8f..8894354d43 100644 --- a/keyboards/keebio/sinc/rev2/config.h +++ b/keyboards/keebio/sinc/rev2/config.h @@ -26,8 +26,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. /* Synchronize Caps Lock LED across halves */ #define SPLIT_LED_STATE_ENABLE -/* ws2812 RGB LED */ -#define RGBLIGHT_LED_MAP { 1, 2, 3, 12, 13, 14, 15, 0, 7, 6, 5, 4, 11, 10, 9, 8 } #define RGBLIGHT_DEFAULT_MODE (RGBLIGHT_MODE_RAINBOW_SWIRL + 2) #define VIA_EEPROM_LAYOUT_OPTIONS_SIZE 2 diff --git a/keyboards/keebio/sinc/rev2/info.json b/keyboards/keebio/sinc/rev2/info.json index d9372d9e94..0c86727abe 100644 --- a/keyboards/keebio/sinc/rev2/info.json +++ b/keyboards/keebio/sinc/rev2/info.json @@ -49,6 +49,7 @@ }, "rgblight": { "led_count": 16, + "led_map": [1, 2, 3, 12, 13, 14, 15, 0, 7, 6, 5, 4, 11, 10, 9, 8], "split_count": [8, 8], "animations": { "alternating": true, diff --git a/keyboards/keebio/stick/config.h b/keyboards/keebio/stick/config.h index d36d39703b..999b71be76 100644 --- a/keyboards/keebio/stick/config.h +++ b/keyboards/keebio/stick/config.h @@ -18,11 +18,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #pragma once /* WS2812 RGB LED */ -# define RGBLED_NUM 12 -# define RGBLIGHT_HUE_STEP 8 -# define RGBLIGHT_SAT_STEP 8 -# define RGBLIGHT_VAL_STEP 8 -# define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */ # define RGBLIGHT_EFFECT_BREATHING # define RGBLIGHT_EFFECT_RAINBOW_MOOD # define RGBLIGHT_EFFECT_RAINBOW_SWIRL @@ -35,7 +30,7 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. # define RGBLIGHT_EFFECT_TWINKLE // RGB Matrix # ifdef RGB_MATRIX_ENABLE -# define RGB_MATRIX_LED_COUNT RGBLED_NUM +# define RGB_MATRIX_LED_COUNT 12 // RGB Matrix Animation modes. Explicitly enabled // For full list of effects, see: // https://docs.qmk.fm/#/feature_rgb_matrix?id=rgb-matrix-effects @@ -85,5 +80,3 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. # define ENABLE_RGB_MATRIX_SOLID_SPLASH # define ENABLE_RGB_MATRIX_SOLID_MULTISPLASH # endif - -#define TAPPING_TERM 200 diff --git a/keyboards/keebio/stick/info.json b/keyboards/keebio/stick/info.json index d566e3df74..c5d88a746c 100644 --- a/keyboards/keebio/stick/info.json +++ b/keyboards/keebio/stick/info.json @@ -17,6 +17,12 @@ {"pin_a": "D4", "pin_b": "C6"} ] }, + "rgblight": { + "saturation_steps": 8, + "brightness_steps": 8, + "led_count": 12, + "sleep": true + }, "ws2812": { "pin": "D3" }, diff --git a/keyboards/keebio/tukey/config.h b/keyboards/keebio/tukey/config.h index 54d3f668a7..b833d1ab85 100644 --- a/keyboards/keebio/tukey/config.h +++ b/keyboards/keebio/tukey/config.h @@ -17,10 +17,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #pragma once - #define RGBLED_NUM 8 - #define RGBLIGHT_HUE_STEP 8 - #define RGBLIGHT_SAT_STEP 8 - #define RGBLIGHT_VAL_STEP 8 #define RGBLIGHT_EFFECT_BREATHING #define RGBLIGHT_EFFECT_RAINBOW_MOOD #define RGBLIGHT_EFFECT_RAINBOW_SWIRL diff --git a/keyboards/keebio/tukey/info.json b/keyboards/keebio/tukey/info.json index 3c4951b407..f1ae47341d 100644 --- a/keyboards/keebio/tukey/info.json +++ b/keyboards/keebio/tukey/info.json @@ -8,6 +8,11 @@ "pid": "0x1112", "device_version": "1.0.0" }, + "rgblight": { + "saturation_steps": 8, + "brightness_steps": 8, + "led_count": 8 + }, "ws2812": { "pin": "D3" }, diff --git a/keyboards/keebio/viterbi/rev1/config.h b/keyboards/keebio/viterbi/rev1/config.h index 1dfed1a82f..18b5d426e4 100644 --- a/keyboards/keebio/viterbi/rev1/config.h +++ b/keyboards/keebio/viterbi/rev1/config.h @@ -21,7 +21,3 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #define LOCKING_SUPPORT_ENABLE /* Locking resynchronize hack */ #define LOCKING_RESYNC_ENABLE - -/* ws2812 RGB LED */ -#define RGBLED_NUM 14 -#define RGBLED_SPLIT { 7, 7 } diff --git a/keyboards/keebio/viterbi/rev1/info.json b/keyboards/keebio/viterbi/rev1/info.json index 01ec06bc51..a003331f25 100644 --- a/keyboards/keebio/viterbi/rev1/info.json +++ b/keyboards/keebio/viterbi/rev1/info.json @@ -7,6 +7,10 @@ "pid": "0x1157", "device_version": "1.0.0" }, + "rgblight": { + "led_count": 14, + "split_count": [7, 7] + }, "ws2812": { "pin": "D3" }, diff --git a/keyboards/keebio/viterbi/rev2/config.h b/keyboards/keebio/viterbi/rev2/config.h index 56151a0028..010fcffc9b 100644 --- a/keyboards/keebio/viterbi/rev2/config.h +++ b/keyboards/keebio/viterbi/rev2/config.h @@ -23,7 +23,3 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #define LOCKING_SUPPORT_ENABLE /* Locking resynchronize hack */ #define LOCKING_RESYNC_ENABLE - -/* ws2812 RGB LED */ -#define RGBLED_NUM 14 -#define RGBLED_SPLIT { 7, 7 } diff --git a/keyboards/keebio/viterbi/rev2/info.json b/keyboards/keebio/viterbi/rev2/info.json index 10f36652ab..88ab2cd137 100644 --- a/keyboards/keebio/viterbi/rev2/info.json +++ b/keyboards/keebio/viterbi/rev2/info.json @@ -16,6 +16,10 @@ "pin": "B6", "levels": 7 }, + "rgblight": { + "led_count": 14, + "split_count": [7, 7] + }, "ws2812": { "pin": "D3" }, diff --git a/keyboards/keebio/wavelet/config.h b/keyboards/keebio/wavelet/config.h index b6d4d64719..2fd8b7d4d0 100644 --- a/keyboards/keebio/wavelet/config.h +++ b/keyboards/keebio/wavelet/config.h @@ -23,6 +23,3 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #define LOCKING_SUPPORT_ENABLE /* Locking resynchronize hack */ #define LOCKING_RESYNC_ENABLE - -/* ws2812 RGB LED */ -#define RGBLED_NUM 12 // Number of LEDs diff --git a/keyboards/keebio/wavelet/info.json b/keyboards/keebio/wavelet/info.json index c40265fc5b..3b88fcdd77 100644 --- a/keyboards/keebio/wavelet/info.json +++ b/keyboards/keebio/wavelet/info.json @@ -17,6 +17,9 @@ "pin": "B5", "levels": 7 }, + "rgblight": { + "led_count": 12 + }, "ws2812": { "pin": "D3" }, diff --git a/keyboards/keebio/wtf60/config.h b/keyboards/keebio/wtf60/config.h index 70343a3763..caf3e5c7db 100644 --- a/keyboards/keebio/wtf60/config.h +++ b/keyboards/keebio/wtf60/config.h @@ -18,11 +18,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #define AUDIO_PIN C6 - #define RGBLED_NUM 16 - #define RGBLIGHT_HUE_STEP 8 - #define RGBLIGHT_SAT_STEP 8 - #define RGBLIGHT_VAL_STEP 8 - #define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */ #define RGBLIGHT_EFFECT_BREATHING #define RGBLIGHT_EFFECT_RAINBOW_MOOD #define RGBLIGHT_EFFECT_RAINBOW_SWIRL diff --git a/keyboards/keebio/wtf60/info.json b/keyboards/keebio/wtf60/info.json index ebac7096f7..a78a7dc163 100644 --- a/keyboards/keebio/wtf60/info.json +++ b/keyboards/keebio/wtf60/info.json @@ -8,6 +8,12 @@ "pid": "0x1337", "device_version": "0.0.1" }, + "rgblight": { + "saturation_steps": 8, + "brightness_steps": 8, + "led_count": 16, + "sleep": true + }, "ws2812": { "pin": "E6" }, diff --git a/keyboards/keebmonkey/kbmg68/config.h b/keyboards/keebmonkey/kbmg68/config.h index 2d3b3feef7..9b4d5b9db5 100644 --- a/keyboards/keebmonkey/kbmg68/config.h +++ b/keyboards/keebmonkey/kbmg68/config.h @@ -16,11 +16,6 @@ #pragma once - #define RGBLED_NUM 68 - #define RGBLIGHT_HUE_STEP 8 - #define RGBLIGHT_SAT_STEP 8 - #define RGBLIGHT_VAL_STEP 8 - #define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */ #define RGBLIGHT_EFFECT_BREATHING #define RGBLIGHT_EFFECT_RAINBOW_MOOD #define RGBLIGHT_EFFECT_RAINBOW_SWIRL diff --git a/keyboards/keebmonkey/kbmg68/info.json b/keyboards/keebmonkey/kbmg68/info.json index 89bb9f7690..d22f417f4e 100644 --- a/keyboards/keebmonkey/kbmg68/info.json +++ b/keyboards/keebmonkey/kbmg68/info.json @@ -8,6 +8,12 @@ "pid": "0x0000", "device_version": "0.0.1" }, + "rgblight": { + "saturation_steps": 8, + "brightness_steps": 8, + "led_count": 68, + "sleep": true + }, "ws2812": { "pin": "B0" }, diff --git a/keyboards/keebsforall/coarse60/config.h b/keyboards/keebsforall/coarse60/config.h index 20493f173c..9be0f484f2 100644 --- a/keyboards/keebsforall/coarse60/config.h +++ b/keyboards/keebsforall/coarse60/config.h @@ -25,7 +25,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. /* Locking resynchronize hack */ #define LOCKING_RESYNC_ENABLE -#define RGBLED_NUM 14 #define WS2812_SPI SPID2 #define WS2812_SPI_MOSI_PAL_MODE 0 #define WS2812_SPI_SCK_PAL_MODE 0 diff --git a/keyboards/keebsforall/coarse60/info.json b/keyboards/keebsforall/coarse60/info.json index 11ec69872f..3085eb90b5 100644 --- a/keyboards/keebsforall/coarse60/info.json +++ b/keyboards/keebsforall/coarse60/info.json @@ -23,6 +23,9 @@ "levels": 6, "breathing": true }, + "rgblight": { + "led_count": 14 + }, "ws2812": { "pin": "B15", "driver": "spi" diff --git a/keyboards/keebsforall/coarse60/rules.mk b/keyboards/keebsforall/coarse60/rules.mk index e353d7863f..33b9c9f159 100644 --- a/keyboards/keebsforall/coarse60/rules.mk +++ b/keyboards/keebsforall/coarse60/rules.mk @@ -13,5 +13,3 @@ AUDIO_ENABLE = no # Audio output ENCODER_ENABLE = yes -# Enter lower-power sleep mode when on the ChibiOS idle thread -OPT_DEFS += -DCORTEX_ENABLE_WFI_IDLE=TRUE diff --git a/keyboards/keebwerk/nano_slider/config.h b/keyboards/keebwerk/nano_slider/config.h index 2d9f98c167..7372cad041 100644 --- a/keyboards/keebwerk/nano_slider/config.h +++ b/keyboards/keebwerk/nano_slider/config.h @@ -19,11 +19,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #define SLIDER_PIN D4 -# define RGBLED_NUM 4 -# define RGBLIGHT_HUE_STEP 8 -# define RGBLIGHT_SAT_STEP 8 -# define RGBLIGHT_VAL_STEP 8 -# define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */ /*== all animations enable ==*/ # define RGBLIGHT_EFFECT_BREATHING # define RGBLIGHT_EFFECT_RAINBOW_MOOD diff --git a/keyboards/keebwerk/nano_slider/info.json b/keyboards/keebwerk/nano_slider/info.json index 7c067c6f99..ae830385a8 100644 --- a/keyboards/keebwerk/nano_slider/info.json +++ b/keyboards/keebwerk/nano_slider/info.json @@ -17,6 +17,12 @@ "pin": "B7", "breathing": true }, + "rgblight": { + "saturation_steps": 8, + "brightness_steps": 8, + "led_count": 4, + "sleep": true + }, "ws2812": { "pin": "F6" }, diff --git a/keyboards/kegen/gboy/config.h b/keyboards/kegen/gboy/config.h index 2b008e5ca7..edd99e9df1 100644 --- a/keyboards/kegen/gboy/config.h +++ b/keyboards/kegen/gboy/config.h @@ -27,7 +27,3 @@ #define RGBLIGHT_EFFECT_RGB_TEST #define RGBLIGHT_EFFECT_ALTERNATING #define RGBLIGHT_EFFECT_TWINKLE -#define RGBLED_NUM 14 -#define RGBLIGHT_HUE_STEP 8 -#define RGBLIGHT_SAT_STEP 8 -#define RGBLIGHT_VAL_STEP 8 diff --git a/keyboards/kegen/gboy/info.json b/keyboards/kegen/gboy/info.json index f66eefd2da..e3bcbd34f7 100644 --- a/keyboards/kegen/gboy/info.json +++ b/keyboards/kegen/gboy/info.json @@ -17,6 +17,11 @@ "pin": "B7", "levels": 15 }, + "rgblight": { + "saturation_steps": 8, + "brightness_steps": 8, + "led_count": 14 + }, "ws2812": { "pin": "D1" }, diff --git a/keyboards/keybage/radpad/config.h b/keyboards/keybage/radpad/config.h index 5146b6ee13..029aa12c95 100644 --- a/keyboards/keybage/radpad/config.h +++ b/keyboards/keybage/radpad/config.h @@ -17,8 +17,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #pragma once - #define RGBLED_NUM 16 - #define RGBLIGHT_SLEEP #define RGBLIGHT_EFFECT_BREATHING #define RGBLIGHT_EFFECT_RAINBOW_MOOD #define RGBLIGHT_EFFECT_RAINBOW_SWIRL diff --git a/keyboards/keybage/radpad/info.json b/keyboards/keybage/radpad/info.json index 2d8e566a79..f170975f0a 100644 --- a/keyboards/keybage/radpad/info.json +++ b/keyboards/keybage/radpad/info.json @@ -22,6 +22,10 @@ "bootmagic": { "matrix": [1, 3] }, + "rgblight": { + "led_count": 16, + "sleep": true + }, "ws2812": { "pin": "F4" }, diff --git a/keyboards/keycapsss/kimiko/rev1/config.h b/keyboards/keycapsss/kimiko/rev1/config.h index 27049500bc..8e44b27ace 100644 --- a/keyboards/keycapsss/kimiko/rev1/config.h +++ b/keyboards/keycapsss/kimiko/rev1/config.h @@ -16,12 +16,6 @@ #pragma once -#ifdef RGBLIGHT_ENABLE -# define RGBLED_NUM 60 // Total number of LEDs -# define RGBLED_SPLIT { 30, 30 } // LEDs per side -# define RGBLIGHT_SPLIT -#endif - // Limit the power draw #ifdef IOS_DEVICE_ENABLE #define RGBLIGHT_LIMIT_VAL 40 diff --git a/keyboards/keycapsss/kimiko/rev1/info.json b/keyboards/keycapsss/kimiko/rev1/info.json index 56028f3f81..e0106f4423 100644 --- a/keyboards/keycapsss/kimiko/rev1/info.json +++ b/keyboards/keycapsss/kimiko/rev1/info.json @@ -21,6 +21,10 @@ "split": { "soft_serial_pin": "D2" }, + "rgblight": { + "led_count": 60, + "split_count": [30, 30] + }, "ws2812": { "pin": "D3" }, diff --git a/keyboards/keycapsss/o4l_5x12/config.h b/keyboards/keycapsss/o4l_5x12/config.h index 804dabbf6d..783ce3f9d2 100644 --- a/keyboards/keycapsss/o4l_5x12/config.h +++ b/keyboards/keycapsss/o4l_5x12/config.h @@ -1,10 +1,5 @@ #pragma once -# define RGBLED_NUM 12 -# define RGBLIGHT_HUE_STEP 4 -# define RGBLIGHT_SAT_STEP 4 -# define RGBLIGHT_VAL_STEP 4 -//# define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */ # define RGBLIGHT_EFFECT_BREATHING # define RGBLIGHT_EFFECT_RAINBOW_MOOD # define RGBLIGHT_EFFECT_RAINBOW_SWIRL diff --git a/keyboards/keycapsss/o4l_5x12/info.json b/keyboards/keycapsss/o4l_5x12/info.json index 0766e0a2e4..090355464c 100644 --- a/keyboards/keycapsss/o4l_5x12/info.json +++ b/keyboards/keycapsss/o4l_5x12/info.json @@ -8,6 +8,12 @@ "pid": "0x0512", "device_version": "0.0.1" }, + "rgblight": { + "hue_steps": 4, + "saturation_steps": 4, + "brightness_steps": 4, + "led_count": 12 + }, "ws2812": { "pin": "D3" }, diff --git a/keyboards/keycapsss/plaid_pad/config.h b/keyboards/keycapsss/plaid_pad/config.h deleted file mode 100644 index 984323f63c..0000000000 --- a/keyboards/keycapsss/plaid_pad/config.h +++ /dev/null @@ -1,20 +0,0 @@ -/* Copyright 2020 Ben Roesner (keycapsss.com) - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see <http://www.gnu.org/licenses/>. - */ - -#pragma once - -// Fix for volume controll with encoder (steadily in/decrease) -#define TAP_CODE_DELAY 60 diff --git a/keyboards/keycapsss/plaid_pad/info.json b/keyboards/keycapsss/plaid_pad/info.json index 9fe02448d0..c66bd05f1b 100644 --- a/keyboards/keycapsss/plaid_pad/info.json +++ b/keyboards/keycapsss/plaid_pad/info.json @@ -7,6 +7,9 @@ "pid": "0x5050", "max_power": 100 }, + "qmk": { + "tap_keycode_delay": 60 + }, "matrix_pins": { "cols": ["B0", "D7", "D6", "D5"], "rows": ["C0", "C1", "C2", "C3"] diff --git a/keyboards/keychron/c1_pro/ansi/rgb/rules.mk b/keyboards/keychron/c1_pro/ansi/rgb/rules.mk index 414ee38bbd..7307f9f9e7 100644 --- a/keyboards/keychron/c1_pro/ansi/rgb/rules.mk +++ b/keyboards/keychron/c1_pro/ansi/rgb/rules.mk @@ -1,3 +1 @@ # Build Options -# Enter lower-power sleep mode when on the ChibiOS idle thread -OPT_DEFS += -DCORTEX_ENABLE_WFI_IDLE=TRUE diff --git a/keyboards/keychron/c1_pro/ansi/white/rules.mk b/keyboards/keychron/c1_pro/ansi/white/rules.mk index 414ee38bbd..7307f9f9e7 100644 --- a/keyboards/keychron/c1_pro/ansi/white/rules.mk +++ b/keyboards/keychron/c1_pro/ansi/white/rules.mk @@ -1,3 +1 @@ # Build Options -# Enter lower-power sleep mode when on the ChibiOS idle thread -OPT_DEFS += -DCORTEX_ENABLE_WFI_IDLE=TRUE diff --git a/keyboards/keychron/c2_pro/ansi/rgb/rules.mk b/keyboards/keychron/c2_pro/ansi/rgb/rules.mk index 7c43bc28cd..dab1551049 100644 --- a/keyboards/keychron/c2_pro/ansi/rgb/rules.mk +++ b/keyboards/keychron/c2_pro/ansi/rgb/rules.mk @@ -1,5 +1,2 @@ # Build Options -# Enter lower-power sleep mode when on the ChibiOS idle thread -OPT_DEFS += -DCORTEX_ENABLE_WFI_IDLE=TRUE - SRC += matrix.c diff --git a/keyboards/keychron/c2_pro/ansi/white/rules.mk b/keyboards/keychron/c2_pro/ansi/white/rules.mk index 7c43bc28cd..dab1551049 100644 --- a/keyboards/keychron/c2_pro/ansi/white/rules.mk +++ b/keyboards/keychron/c2_pro/ansi/white/rules.mk @@ -1,5 +1,2 @@ # Build Options -# Enter lower-power sleep mode when on the ChibiOS idle thread -OPT_DEFS += -DCORTEX_ENABLE_WFI_IDLE=TRUE - SRC += matrix.c diff --git a/keyboards/keychron/q0/rev_0130/rules.mk b/keyboards/keychron/q0/rev_0130/rules.mk index 4eebc33437..f6868e88e3 100644 --- a/keyboards/keychron/q0/rev_0130/rules.mk +++ b/keyboards/keychron/q0/rev_0130/rules.mk @@ -1,5 +1,3 @@ EEPROM_DRIVER = wear_leveling WEAR_LEVELING_DRIVER = embedded_flash -# Enter lower-power sleep mode when on the ChibiOS idle thread -OPT_DEFS += -DCORTEX_ENABLE_WFI_IDLE=TRUE diff --git a/keyboards/keychron/q0/rev_0131/rules.mk b/keyboards/keychron/q0/rev_0131/rules.mk index 4eebc33437..f6868e88e3 100644 --- a/keyboards/keychron/q0/rev_0131/rules.mk +++ b/keyboards/keychron/q0/rev_0131/rules.mk @@ -1,5 +1,3 @@ EEPROM_DRIVER = wear_leveling WEAR_LEVELING_DRIVER = embedded_flash -# Enter lower-power sleep mode when on the ChibiOS idle thread -OPT_DEFS += -DCORTEX_ENABLE_WFI_IDLE=TRUE diff --git a/keyboards/keychron/q1/iso/keymaps/victorsavu3/keymap.c b/keyboards/keychron/q1/iso/keymaps/victorsavu3/keymap.c index b97e6bfb92..5256c97dca 100644 --- a/keyboards/keychron/q1/iso/keymaps/victorsavu3/keymap.c +++ b/keyboards/keychron/q1/iso/keymaps/victorsavu3/keymap.c @@ -55,8 +55,8 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS), [WIN_BASE] = LAYOUT_iso_83( - KC_ESC, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_DEL, X(SAD), - KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, X(GRIN), + KC_ESC, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_DEL, UM(SAD), + KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, UM(GRIN), KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_PGUP, QK_LEAD, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_NUHS, KC_ENT, KC_PGDN, KC_LSFT, KC_NUBS, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_UP, diff --git a/keyboards/keychron/q10/ansi_encoder/rules.mk b/keyboards/keychron/q10/ansi_encoder/rules.mk index 5df3cbccaf..7da353fbd1 100644 --- a/keyboards/keychron/q10/ansi_encoder/rules.mk +++ b/keyboards/keychron/q10/ansi_encoder/rules.mk @@ -16,9 +16,6 @@ RGB_MATRIX_ENABLE = yes EEPROM_DRIVER = wear_leveling WEAR_LEVELING_DRIVER = embedded_flash -# Enter lower-power sleep mode when on the ChibiOS idle thread -OPT_DEFS += -DCORTEX_ENABLE_WFI_IDLE=TRUE - # custom matrix setup CUSTOM_MATRIX = lite diff --git a/keyboards/keychron/q10/iso_encoder/rules.mk b/keyboards/keychron/q10/iso_encoder/rules.mk index 5df3cbccaf..7da353fbd1 100644 --- a/keyboards/keychron/q10/iso_encoder/rules.mk +++ b/keyboards/keychron/q10/iso_encoder/rules.mk @@ -16,9 +16,6 @@ RGB_MATRIX_ENABLE = yes EEPROM_DRIVER = wear_leveling WEAR_LEVELING_DRIVER = embedded_flash -# Enter lower-power sleep mode when on the ChibiOS idle thread -OPT_DEFS += -DCORTEX_ENABLE_WFI_IDLE=TRUE - # custom matrix setup CUSTOM_MATRIX = lite diff --git a/keyboards/keychron/q11/ansi_encoder/rules.mk b/keyboards/keychron/q11/ansi_encoder/rules.mk index ac78b227d6..60d5c6bea2 100755..100644 --- a/keyboards/keychron/q11/ansi_encoder/rules.mk +++ b/keyboards/keychron/q11/ansi_encoder/rules.mk @@ -1,4 +1,6 @@ -# Enter lower-power sleep mode when on the ChibiOS idle thread -OPT_DEFS += -DCORTEX_ENABLE_WFI_IDLE=TRUE - +# Build Options +# change yes to no to disable +# +EEPROM_DRIVER = wear_leveling +WEAR_LEVELING_DRIVER = embedded_flash SERIAL_DRIVER = usart diff --git a/keyboards/keychron/q12/ansi_encoder/rules.mk b/keyboards/keychron/q12/ansi_encoder/rules.mk index 9958a466f6..80a3f300bd 100644 --- a/keyboards/keychron/q12/ansi_encoder/rules.mk +++ b/keyboards/keychron/q12/ansi_encoder/rules.mk @@ -16,9 +16,6 @@ RGB_MATRIX_ENABLE = yes EEPROM_DRIVER = wear_leveling WEAR_LEVELING_DRIVER = embedded_flash -# Enter lower-power sleep mode when on the ChibiOS idle thread -OPT_DEFS += -DCORTEX_ENABLE_WFI_IDLE=TRUE - # custom matrix setup CUSTOM_MATRIX = lite diff --git a/keyboards/keychron/q12/iso_encoder/rules.mk b/keyboards/keychron/q12/iso_encoder/rules.mk index df920055a0..9867724957 100644 --- a/keyboards/keychron/q12/iso_encoder/rules.mk +++ b/keyboards/keychron/q12/iso_encoder/rules.mk @@ -16,9 +16,6 @@ RGB_MATRIX_ENABLE = yes EEPROM_DRIVER = wear_leveling WEAR_LEVELING_DRIVER = embedded_flash -# Enter lower-power sleep mode when on the ChibiOS idle thread -OPT_DEFS += -DCORTEX_ENABLE_WFI_IDLE=TRUE - # custom matrix setup CUSTOM_MATRIX = lite diff --git a/keyboards/keychron/q2/ansi/rules.mk b/keyboards/keychron/q2/ansi/rules.mk index bc7a0e0ff3..ede7d6fab2 100644 --- a/keyboards/keychron/q2/ansi/rules.mk +++ b/keyboards/keychron/q2/ansi/rules.mk @@ -16,5 +16,3 @@ RGB_MATRIX_ENABLE = yes EEPROM_DRIVER = wear_leveling WEAR_LEVELING_DRIVER = embedded_flash -# Enter lower-power sleep mode when on the ChibiOS idle thread -OPT_DEFS += -DCORTEX_ENABLE_WFI_IDLE=TRUE diff --git a/keyboards/keychron/q2/ansi_encoder/rules.mk b/keyboards/keychron/q2/ansi_encoder/rules.mk index 3de172c6e3..b294cf950e 100644 --- a/keyboards/keychron/q2/ansi_encoder/rules.mk +++ b/keyboards/keychron/q2/ansi_encoder/rules.mk @@ -16,5 +16,3 @@ RGB_MATRIX_ENABLE = yes EEPROM_DRIVER = wear_leveling WEAR_LEVELING_DRIVER = embedded_flash -# Enter lower-power sleep mode when on the ChibiOS idle thread -OPT_DEFS += -DCORTEX_ENABLE_WFI_IDLE=TRUE diff --git a/keyboards/keychron/q2/iso/rules.mk b/keyboards/keychron/q2/iso/rules.mk index f4aca09af8..b3de962291 100644 --- a/keyboards/keychron/q2/iso/rules.mk +++ b/keyboards/keychron/q2/iso/rules.mk @@ -16,5 +16,3 @@ RGB_MATRIX_ENABLE = yes EEPROM_DRIVER = wear_leveling WEAR_LEVELING_DRIVER = embedded_flash -# Enter lower-power sleep mode when on the ChibiOS idle thread -OPT_DEFS += -DCORTEX_ENABLE_WFI_IDLE=TRUE diff --git a/keyboards/keychron/q2/iso_encoder/rules.mk b/keyboards/keychron/q2/iso_encoder/rules.mk index 33a50c67f7..aba76c0944 100644 --- a/keyboards/keychron/q2/iso_encoder/rules.mk +++ b/keyboards/keychron/q2/iso_encoder/rules.mk @@ -16,5 +16,3 @@ RGB_MATRIX_ENABLE = yes EEPROM_DRIVER = wear_leveling WEAR_LEVELING_DRIVER = embedded_flash -# Enter lower-power sleep mode when on the ChibiOS idle thread -OPT_DEFS += -DCORTEX_ENABLE_WFI_IDLE=TRUE diff --git a/keyboards/keychron/q2/jis/rules.mk b/keyboards/keychron/q2/jis/rules.mk index 2b4a67b1ee..c37beecb9e 100644 --- a/keyboards/keychron/q2/jis/rules.mk +++ b/keyboards/keychron/q2/jis/rules.mk @@ -15,6 +15,3 @@ RGB_MATRIX_ENABLE = yes EEPROM_DRIVER = wear_leveling WEAR_LEVELING_DRIVER = embedded_flash -# Enter lower-power sleep mode when on the ChibiOS idle thread -OPT_DEFS += -DCORTEX_ENABLE_WFI_IDLE=TRUE - diff --git a/keyboards/keychron/q2/jis_encoder/rules.mk b/keyboards/keychron/q2/jis_encoder/rules.mk index 6a772965ff..5091fe9414 100644 --- a/keyboards/keychron/q2/jis_encoder/rules.mk +++ b/keyboards/keychron/q2/jis_encoder/rules.mk @@ -16,6 +16,3 @@ RGB_MATRIX_ENABLE = yes EEPROM_DRIVER = wear_leveling WEAR_LEVELING_DRIVER = embedded_flash -# Enter lower-power sleep mode when on the ChibiOS idle thread -OPT_DEFS += -DCORTEX_ENABLE_WFI_IDLE=TRUE - diff --git a/keyboards/keychron/q3/ansi/rules.mk b/keyboards/keychron/q3/ansi/rules.mk index 566c476585..58bbb89a72 100644 --- a/keyboards/keychron/q3/ansi/rules.mk +++ b/keyboards/keychron/q3/ansi/rules.mk @@ -16,5 +16,3 @@ LTO_ENABLE = yes EEPROM_DRIVER = wear_leveling WEAR_LEVELING_DRIVER = embedded_flash -# Enter lower-power sleep mode when on the ChibiOS idle thread -OPT_DEFS += -DCORTEX_ENABLE_WFI_IDLE=TRUE diff --git a/keyboards/keychron/q3/ansi_encoder/rules.mk b/keyboards/keychron/q3/ansi_encoder/rules.mk index 95a153f689..77b90f2466 100644 --- a/keyboards/keychron/q3/ansi_encoder/rules.mk +++ b/keyboards/keychron/q3/ansi_encoder/rules.mk @@ -17,9 +17,6 @@ LTO_ENABLE = yes EEPROM_DRIVER = wear_leveling WEAR_LEVELING_DRIVER = embedded_flash -# Enter lower-power sleep mode when on the ChibiOS idle thread -OPT_DEFS += -DCORTEX_ENABLE_WFI_IDLE=TRUE - # custom matrix setup CUSTOM_MATRIX = lite diff --git a/keyboards/keychron/q3/iso/rules.mk b/keyboards/keychron/q3/iso/rules.mk index 566c476585..58bbb89a72 100644 --- a/keyboards/keychron/q3/iso/rules.mk +++ b/keyboards/keychron/q3/iso/rules.mk @@ -16,5 +16,3 @@ LTO_ENABLE = yes EEPROM_DRIVER = wear_leveling WEAR_LEVELING_DRIVER = embedded_flash -# Enter lower-power sleep mode when on the ChibiOS idle thread -OPT_DEFS += -DCORTEX_ENABLE_WFI_IDLE=TRUE diff --git a/keyboards/keychron/q3/iso_encoder/rules.mk b/keyboards/keychron/q3/iso_encoder/rules.mk index 95a153f689..77b90f2466 100644 --- a/keyboards/keychron/q3/iso_encoder/rules.mk +++ b/keyboards/keychron/q3/iso_encoder/rules.mk @@ -17,9 +17,6 @@ LTO_ENABLE = yes EEPROM_DRIVER = wear_leveling WEAR_LEVELING_DRIVER = embedded_flash -# Enter lower-power sleep mode when on the ChibiOS idle thread -OPT_DEFS += -DCORTEX_ENABLE_WFI_IDLE=TRUE - # custom matrix setup CUSTOM_MATRIX = lite diff --git a/keyboards/keychron/q3/jis/rules.mk b/keyboards/keychron/q3/jis/rules.mk index 566c476585..58bbb89a72 100644 --- a/keyboards/keychron/q3/jis/rules.mk +++ b/keyboards/keychron/q3/jis/rules.mk @@ -16,5 +16,3 @@ LTO_ENABLE = yes EEPROM_DRIVER = wear_leveling WEAR_LEVELING_DRIVER = embedded_flash -# Enter lower-power sleep mode when on the ChibiOS idle thread -OPT_DEFS += -DCORTEX_ENABLE_WFI_IDLE=TRUE diff --git a/keyboards/keychron/q3/jis_encoder/rules.mk b/keyboards/keychron/q3/jis_encoder/rules.mk index 95a153f689..77b90f2466 100644 --- a/keyboards/keychron/q3/jis_encoder/rules.mk +++ b/keyboards/keychron/q3/jis_encoder/rules.mk @@ -17,9 +17,6 @@ LTO_ENABLE = yes EEPROM_DRIVER = wear_leveling WEAR_LEVELING_DRIVER = embedded_flash -# Enter lower-power sleep mode when on the ChibiOS idle thread -OPT_DEFS += -DCORTEX_ENABLE_WFI_IDLE=TRUE - # custom matrix setup CUSTOM_MATRIX = lite diff --git a/keyboards/keychron/q4/ansi_v1/rules.mk b/keyboards/keychron/q4/ansi_v1/rules.mk index 9111c3b9bd..cad488b009 100644 --- a/keyboards/keychron/q4/ansi_v1/rules.mk +++ b/keyboards/keychron/q4/ansi_v1/rules.mk @@ -16,6 +16,3 @@ LTO_ENABLE = no EEPROM_DRIVER = wear_leveling WEAR_LEVELING_DRIVER = embedded_flash -# Enter lower-power sleep mode when on the ChibiOS idle thread -OPT_DEFS += -DCORTEX_ENABLE_WFI_IDLE=TRUE - diff --git a/keyboards/keychron/q4/ansi_v2/rules.mk b/keyboards/keychron/q4/ansi_v2/rules.mk index 9111c3b9bd..cad488b009 100644 --- a/keyboards/keychron/q4/ansi_v2/rules.mk +++ b/keyboards/keychron/q4/ansi_v2/rules.mk @@ -16,6 +16,3 @@ LTO_ENABLE = no EEPROM_DRIVER = wear_leveling WEAR_LEVELING_DRIVER = embedded_flash -# Enter lower-power sleep mode when on the ChibiOS idle thread -OPT_DEFS += -DCORTEX_ENABLE_WFI_IDLE=TRUE - diff --git a/keyboards/keychron/q4/iso/rules.mk b/keyboards/keychron/q4/iso/rules.mk index 9111c3b9bd..cad488b009 100644 --- a/keyboards/keychron/q4/iso/rules.mk +++ b/keyboards/keychron/q4/iso/rules.mk @@ -16,6 +16,3 @@ LTO_ENABLE = no EEPROM_DRIVER = wear_leveling WEAR_LEVELING_DRIVER = embedded_flash -# Enter lower-power sleep mode when on the ChibiOS idle thread -OPT_DEFS += -DCORTEX_ENABLE_WFI_IDLE=TRUE - diff --git a/keyboards/keychron/q5/ansi/rules.mk b/keyboards/keychron/q5/ansi/rules.mk index f2dba218bf..e859eb9c34 100644 --- a/keyboards/keychron/q5/ansi/rules.mk +++ b/keyboards/keychron/q5/ansi/rules.mk @@ -15,9 +15,6 @@ RGB_MATRIX_ENABLE = yes EEPROM_DRIVER = wear_leveling WEAR_LEVELING_DRIVER = embedded_flash -# Enter lower-power sleep mode when on the ChibiOS idle thread -OPT_DEFS += -DCORTEX_ENABLE_WFI_IDLE=TRUE - # custom matrix setup CUSTOM_MATRIX = lite diff --git a/keyboards/keychron/q5/ansi_encoder/rules.mk b/keyboards/keychron/q5/ansi_encoder/rules.mk index 5df3cbccaf..7da353fbd1 100644 --- a/keyboards/keychron/q5/ansi_encoder/rules.mk +++ b/keyboards/keychron/q5/ansi_encoder/rules.mk @@ -16,9 +16,6 @@ RGB_MATRIX_ENABLE = yes EEPROM_DRIVER = wear_leveling WEAR_LEVELING_DRIVER = embedded_flash -# Enter lower-power sleep mode when on the ChibiOS idle thread -OPT_DEFS += -DCORTEX_ENABLE_WFI_IDLE=TRUE - # custom matrix setup CUSTOM_MATRIX = lite diff --git a/keyboards/keychron/q5/iso/rules.mk b/keyboards/keychron/q5/iso/rules.mk index f2dba218bf..e859eb9c34 100644 --- a/keyboards/keychron/q5/iso/rules.mk +++ b/keyboards/keychron/q5/iso/rules.mk @@ -15,9 +15,6 @@ RGB_MATRIX_ENABLE = yes EEPROM_DRIVER = wear_leveling WEAR_LEVELING_DRIVER = embedded_flash -# Enter lower-power sleep mode when on the ChibiOS idle thread -OPT_DEFS += -DCORTEX_ENABLE_WFI_IDLE=TRUE - # custom matrix setup CUSTOM_MATRIX = lite diff --git a/keyboards/keychron/q5/iso_encoder/rules.mk b/keyboards/keychron/q5/iso_encoder/rules.mk index 5df3cbccaf..7da353fbd1 100644 --- a/keyboards/keychron/q5/iso_encoder/rules.mk +++ b/keyboards/keychron/q5/iso_encoder/rules.mk @@ -16,9 +16,6 @@ RGB_MATRIX_ENABLE = yes EEPROM_DRIVER = wear_leveling WEAR_LEVELING_DRIVER = embedded_flash -# Enter lower-power sleep mode when on the ChibiOS idle thread -OPT_DEFS += -DCORTEX_ENABLE_WFI_IDLE=TRUE - # custom matrix setup CUSTOM_MATRIX = lite diff --git a/keyboards/keychron/q6/ansi/rules.mk b/keyboards/keychron/q6/ansi/rules.mk index ce3d41a17d..ec47b77d0f 100644 --- a/keyboards/keychron/q6/ansi/rules.mk +++ b/keyboards/keychron/q6/ansi/rules.mk @@ -16,9 +16,6 @@ LTO_ENABLE = yes EEPROM_DRIVER = wear_leveling WEAR_LEVELING_DRIVER = embedded_flash -# Enter lower-power sleep mode when on the ChibiOS idle thread -OPT_DEFS += -DCORTEX_ENABLE_WFI_IDLE=TRUE - # custom matrix setup CUSTOM_MATRIX = lite diff --git a/keyboards/keychron/q6/ansi_encoder/rules.mk b/keyboards/keychron/q6/ansi_encoder/rules.mk index 95a153f689..77b90f2466 100644 --- a/keyboards/keychron/q6/ansi_encoder/rules.mk +++ b/keyboards/keychron/q6/ansi_encoder/rules.mk @@ -17,9 +17,6 @@ LTO_ENABLE = yes EEPROM_DRIVER = wear_leveling WEAR_LEVELING_DRIVER = embedded_flash -# Enter lower-power sleep mode when on the ChibiOS idle thread -OPT_DEFS += -DCORTEX_ENABLE_WFI_IDLE=TRUE - # custom matrix setup CUSTOM_MATRIX = lite diff --git a/keyboards/keychron/q6/iso/rules.mk b/keyboards/keychron/q6/iso/rules.mk index 3388811add..6548448302 100644 --- a/keyboards/keychron/q6/iso/rules.mk +++ b/keyboards/keychron/q6/iso/rules.mk @@ -17,9 +17,6 @@ LTO_ENABLE = yes EEPROM_DRIVER = wear_leveling WEAR_LEVELING_DRIVER = embedded_flash -# Enter lower-power sleep mode when on the ChibiOS idle thread -OPT_DEFS += -DCORTEX_ENABLE_WFI_IDLE=TRUE - # custom matrix setup CUSTOM_MATRIX = lite diff --git a/keyboards/keychron/q6/iso_encoder/rules.mk b/keyboards/keychron/q6/iso_encoder/rules.mk index d7fe88d9ca..548b0d696b 100644 --- a/keyboards/keychron/q6/iso_encoder/rules.mk +++ b/keyboards/keychron/q6/iso_encoder/rules.mk @@ -18,9 +18,6 @@ LTO_ENABLE = yes EEPROM_DRIVER = wear_leveling WEAR_LEVELING_DRIVER = embedded_flash -# Enter lower-power sleep mode when on the ChibiOS idle thread -OPT_DEFS += -DCORTEX_ENABLE_WFI_IDLE=TRUE - # custom matrix setup CUSTOM_MATRIX = lite diff --git a/keyboards/keychron/q60/ansi/rules.mk b/keyboards/keychron/q60/ansi/rules.mk index 6dcd47b1fe..46f5aef144 100644 --- a/keyboards/keychron/q60/ansi/rules.mk +++ b/keyboards/keychron/q60/ansi/rules.mk @@ -15,6 +15,3 @@ RGB_MATRIX_ENABLE = yes EEPROM_DRIVER = wear_leveling WEAR_LEVELING_DRIVER = embedded_flash -# Enter lower-power sleep mode when on the ChibiOS idle thread -OPT_DEFS += -DCORTEX_ENABLE_WFI_IDLE=TRUE - diff --git a/keyboards/keychron/q65/ansi_encoder/rules.mk b/keyboards/keychron/q65/ansi_encoder/rules.mk index 5df3cbccaf..7da353fbd1 100644 --- a/keyboards/keychron/q65/ansi_encoder/rules.mk +++ b/keyboards/keychron/q65/ansi_encoder/rules.mk @@ -16,9 +16,6 @@ RGB_MATRIX_ENABLE = yes EEPROM_DRIVER = wear_leveling WEAR_LEVELING_DRIVER = embedded_flash -# Enter lower-power sleep mode when on the ChibiOS idle thread -OPT_DEFS += -DCORTEX_ENABLE_WFI_IDLE=TRUE - # custom matrix setup CUSTOM_MATRIX = lite diff --git a/keyboards/keychron/q7/ansi/rules.mk b/keyboards/keychron/q7/ansi/rules.mk index 2b4a67b1ee..c37beecb9e 100644 --- a/keyboards/keychron/q7/ansi/rules.mk +++ b/keyboards/keychron/q7/ansi/rules.mk @@ -15,6 +15,3 @@ RGB_MATRIX_ENABLE = yes EEPROM_DRIVER = wear_leveling WEAR_LEVELING_DRIVER = embedded_flash -# Enter lower-power sleep mode when on the ChibiOS idle thread -OPT_DEFS += -DCORTEX_ENABLE_WFI_IDLE=TRUE - diff --git a/keyboards/keychron/q7/iso/rules.mk b/keyboards/keychron/q7/iso/rules.mk index 7f91e808b1..c37beecb9e 100644 --- a/keyboards/keychron/q7/iso/rules.mk +++ b/keyboards/keychron/q7/iso/rules.mk @@ -15,5 +15,3 @@ RGB_MATRIX_ENABLE = yes EEPROM_DRIVER = wear_leveling WEAR_LEVELING_DRIVER = embedded_flash -# Enter lower-power sleep mode when on the ChibiOS idle thread -OPT_DEFS += -DCORTEX_ENABLE_WFI_IDLE=TRUE diff --git a/keyboards/keychron/q8/ansi/rules.mk b/keyboards/keychron/q8/ansi/rules.mk index 2b4a67b1ee..c37beecb9e 100644 --- a/keyboards/keychron/q8/ansi/rules.mk +++ b/keyboards/keychron/q8/ansi/rules.mk @@ -15,6 +15,3 @@ RGB_MATRIX_ENABLE = yes EEPROM_DRIVER = wear_leveling WEAR_LEVELING_DRIVER = embedded_flash -# Enter lower-power sleep mode when on the ChibiOS idle thread -OPT_DEFS += -DCORTEX_ENABLE_WFI_IDLE=TRUE - diff --git a/keyboards/keychron/q8/ansi_encoder/rules.mk b/keyboards/keychron/q8/ansi_encoder/rules.mk index e94a89ab85..5091fe9414 100644 --- a/keyboards/keychron/q8/ansi_encoder/rules.mk +++ b/keyboards/keychron/q8/ansi_encoder/rules.mk @@ -16,5 +16,3 @@ RGB_MATRIX_ENABLE = yes EEPROM_DRIVER = wear_leveling WEAR_LEVELING_DRIVER = embedded_flash -# Enter lower-power sleep mode when on the ChibiOS idle thread -OPT_DEFS += -DCORTEX_ENABLE_WFI_IDLE=TRUE diff --git a/keyboards/keychron/q8/iso/rules.mk b/keyboards/keychron/q8/iso/rules.mk index 2b4a67b1ee..c37beecb9e 100644 --- a/keyboards/keychron/q8/iso/rules.mk +++ b/keyboards/keychron/q8/iso/rules.mk @@ -15,6 +15,3 @@ RGB_MATRIX_ENABLE = yes EEPROM_DRIVER = wear_leveling WEAR_LEVELING_DRIVER = embedded_flash -# Enter lower-power sleep mode when on the ChibiOS idle thread -OPT_DEFS += -DCORTEX_ENABLE_WFI_IDLE=TRUE - diff --git a/keyboards/keychron/q8/iso_encoder/rules.mk b/keyboards/keychron/q8/iso_encoder/rules.mk index 6a772965ff..5091fe9414 100644 --- a/keyboards/keychron/q8/iso_encoder/rules.mk +++ b/keyboards/keychron/q8/iso_encoder/rules.mk @@ -16,6 +16,3 @@ RGB_MATRIX_ENABLE = yes EEPROM_DRIVER = wear_leveling WEAR_LEVELING_DRIVER = embedded_flash -# Enter lower-power sleep mode when on the ChibiOS idle thread -OPT_DEFS += -DCORTEX_ENABLE_WFI_IDLE=TRUE - diff --git a/keyboards/keychron/q9/ansi/rules.mk b/keyboards/keychron/q9/ansi/rules.mk index 2b4a67b1ee..c37beecb9e 100644 --- a/keyboards/keychron/q9/ansi/rules.mk +++ b/keyboards/keychron/q9/ansi/rules.mk @@ -15,6 +15,3 @@ RGB_MATRIX_ENABLE = yes EEPROM_DRIVER = wear_leveling WEAR_LEVELING_DRIVER = embedded_flash -# Enter lower-power sleep mode when on the ChibiOS idle thread -OPT_DEFS += -DCORTEX_ENABLE_WFI_IDLE=TRUE - diff --git a/keyboards/keychron/q9/ansi_encoder/rules.mk b/keyboards/keychron/q9/ansi_encoder/rules.mk index 7caead18d7..911c497043 100644 --- a/keyboards/keychron/q9/ansi_encoder/rules.mk +++ b/keyboards/keychron/q9/ansi_encoder/rules.mk @@ -17,6 +17,3 @@ RGB_MATRIX_ENABLE = yes EEPROM_DRIVER = wear_leveling WEAR_LEVELING_DRIVER = embedded_flash -# Enter lower-power sleep mode when on the ChibiOS idle thread -OPT_DEFS += -DCORTEX_ENABLE_WFI_IDLE=TRUE - diff --git a/keyboards/keychron/q9/iso/rules.mk b/keyboards/keychron/q9/iso/rules.mk index 2b4a67b1ee..c37beecb9e 100644 --- a/keyboards/keychron/q9/iso/rules.mk +++ b/keyboards/keychron/q9/iso/rules.mk @@ -15,6 +15,3 @@ RGB_MATRIX_ENABLE = yes EEPROM_DRIVER = wear_leveling WEAR_LEVELING_DRIVER = embedded_flash -# Enter lower-power sleep mode when on the ChibiOS idle thread -OPT_DEFS += -DCORTEX_ENABLE_WFI_IDLE=TRUE - diff --git a/keyboards/keychron/q9/iso_encoder/rules.mk b/keyboards/keychron/q9/iso_encoder/rules.mk index 7caead18d7..911c497043 100644 --- a/keyboards/keychron/q9/iso_encoder/rules.mk +++ b/keyboards/keychron/q9/iso_encoder/rules.mk @@ -17,6 +17,3 @@ RGB_MATRIX_ENABLE = yes EEPROM_DRIVER = wear_leveling WEAR_LEVELING_DRIVER = embedded_flash -# Enter lower-power sleep mode when on the ChibiOS idle thread -OPT_DEFS += -DCORTEX_ENABLE_WFI_IDLE=TRUE - diff --git a/keyboards/keychron/s1/ansi/rgb/rules.mk b/keyboards/keychron/s1/ansi/rgb/rules.mk index 2b4a67b1ee..c37beecb9e 100644 --- a/keyboards/keychron/s1/ansi/rgb/rules.mk +++ b/keyboards/keychron/s1/ansi/rgb/rules.mk @@ -15,6 +15,3 @@ RGB_MATRIX_ENABLE = yes EEPROM_DRIVER = wear_leveling WEAR_LEVELING_DRIVER = embedded_flash -# Enter lower-power sleep mode when on the ChibiOS idle thread -OPT_DEFS += -DCORTEX_ENABLE_WFI_IDLE=TRUE - diff --git a/keyboards/keychron/s1/ansi/white/rules.mk b/keyboards/keychron/s1/ansi/white/rules.mk index 1fa4f83a77..cb70ced917 100644 --- a/keyboards/keychron/s1/ansi/white/rules.mk +++ b/keyboards/keychron/s1/ansi/white/rules.mk @@ -15,6 +15,3 @@ LED_MATRIX_ENABLE = yes EEPROM_DRIVER = wear_leveling WEAR_LEVELING_DRIVER = embedded_flash -# Enter lower-power sleep mode when on the ChibiOS idle thread -OPT_DEFS += -DCORTEX_ENABLE_WFI_IDLE=TRUE - diff --git a/keyboards/keychron/v1/ansi/rules.mk b/keyboards/keychron/v1/ansi/rules.mk index f2dba218bf..e859eb9c34 100644 --- a/keyboards/keychron/v1/ansi/rules.mk +++ b/keyboards/keychron/v1/ansi/rules.mk @@ -15,9 +15,6 @@ RGB_MATRIX_ENABLE = yes EEPROM_DRIVER = wear_leveling WEAR_LEVELING_DRIVER = embedded_flash -# Enter lower-power sleep mode when on the ChibiOS idle thread -OPT_DEFS += -DCORTEX_ENABLE_WFI_IDLE=TRUE - # custom matrix setup CUSTOM_MATRIX = lite diff --git a/keyboards/keychron/v1/ansi_encoder/rules.mk b/keyboards/keychron/v1/ansi_encoder/rules.mk index 5df3cbccaf..7da353fbd1 100644 --- a/keyboards/keychron/v1/ansi_encoder/rules.mk +++ b/keyboards/keychron/v1/ansi_encoder/rules.mk @@ -16,9 +16,6 @@ RGB_MATRIX_ENABLE = yes EEPROM_DRIVER = wear_leveling WEAR_LEVELING_DRIVER = embedded_flash -# Enter lower-power sleep mode when on the ChibiOS idle thread -OPT_DEFS += -DCORTEX_ENABLE_WFI_IDLE=TRUE - # custom matrix setup CUSTOM_MATRIX = lite diff --git a/keyboards/keychron/v1/iso/rules.mk b/keyboards/keychron/v1/iso/rules.mk index f2dba218bf..e859eb9c34 100644 --- a/keyboards/keychron/v1/iso/rules.mk +++ b/keyboards/keychron/v1/iso/rules.mk @@ -15,9 +15,6 @@ RGB_MATRIX_ENABLE = yes EEPROM_DRIVER = wear_leveling WEAR_LEVELING_DRIVER = embedded_flash -# Enter lower-power sleep mode when on the ChibiOS idle thread -OPT_DEFS += -DCORTEX_ENABLE_WFI_IDLE=TRUE - # custom matrix setup CUSTOM_MATRIX = lite diff --git a/keyboards/keychron/v1/iso_encoder/rules.mk b/keyboards/keychron/v1/iso_encoder/rules.mk index 5df3cbccaf..7da353fbd1 100644 --- a/keyboards/keychron/v1/iso_encoder/rules.mk +++ b/keyboards/keychron/v1/iso_encoder/rules.mk @@ -16,9 +16,6 @@ RGB_MATRIX_ENABLE = yes EEPROM_DRIVER = wear_leveling WEAR_LEVELING_DRIVER = embedded_flash -# Enter lower-power sleep mode when on the ChibiOS idle thread -OPT_DEFS += -DCORTEX_ENABLE_WFI_IDLE=TRUE - # custom matrix setup CUSTOM_MATRIX = lite diff --git a/keyboards/keychron/v1/jis/rules.mk b/keyboards/keychron/v1/jis/rules.mk index f2dba218bf..e859eb9c34 100644 --- a/keyboards/keychron/v1/jis/rules.mk +++ b/keyboards/keychron/v1/jis/rules.mk @@ -15,9 +15,6 @@ RGB_MATRIX_ENABLE = yes EEPROM_DRIVER = wear_leveling WEAR_LEVELING_DRIVER = embedded_flash -# Enter lower-power sleep mode when on the ChibiOS idle thread -OPT_DEFS += -DCORTEX_ENABLE_WFI_IDLE=TRUE - # custom matrix setup CUSTOM_MATRIX = lite diff --git a/keyboards/keychron/v1/jis_encoder/rules.mk b/keyboards/keychron/v1/jis_encoder/rules.mk index 5df3cbccaf..7da353fbd1 100644 --- a/keyboards/keychron/v1/jis_encoder/rules.mk +++ b/keyboards/keychron/v1/jis_encoder/rules.mk @@ -16,9 +16,6 @@ RGB_MATRIX_ENABLE = yes EEPROM_DRIVER = wear_leveling WEAR_LEVELING_DRIVER = embedded_flash -# Enter lower-power sleep mode when on the ChibiOS idle thread -OPT_DEFS += -DCORTEX_ENABLE_WFI_IDLE=TRUE - # custom matrix setup CUSTOM_MATRIX = lite diff --git a/keyboards/keychron/v10/ansi_encoder/rules.mk b/keyboards/keychron/v10/ansi_encoder/rules.mk index 5df3cbccaf..7da353fbd1 100644 --- a/keyboards/keychron/v10/ansi_encoder/rules.mk +++ b/keyboards/keychron/v10/ansi_encoder/rules.mk @@ -16,9 +16,6 @@ RGB_MATRIX_ENABLE = yes EEPROM_DRIVER = wear_leveling WEAR_LEVELING_DRIVER = embedded_flash -# Enter lower-power sleep mode when on the ChibiOS idle thread -OPT_DEFS += -DCORTEX_ENABLE_WFI_IDLE=TRUE - # custom matrix setup CUSTOM_MATRIX = lite diff --git a/keyboards/keychron/v10/iso_encoder/rules.mk b/keyboards/keychron/v10/iso_encoder/rules.mk index 5df3cbccaf..7da353fbd1 100644 --- a/keyboards/keychron/v10/iso_encoder/rules.mk +++ b/keyboards/keychron/v10/iso_encoder/rules.mk @@ -16,9 +16,6 @@ RGB_MATRIX_ENABLE = yes EEPROM_DRIVER = wear_leveling WEAR_LEVELING_DRIVER = embedded_flash -# Enter lower-power sleep mode when on the ChibiOS idle thread -OPT_DEFS += -DCORTEX_ENABLE_WFI_IDLE=TRUE - # custom matrix setup CUSTOM_MATRIX = lite diff --git a/keyboards/keychron/v2/ansi/rules.mk b/keyboards/keychron/v2/ansi/rules.mk index 2b4a67b1ee..c37beecb9e 100644 --- a/keyboards/keychron/v2/ansi/rules.mk +++ b/keyboards/keychron/v2/ansi/rules.mk @@ -15,6 +15,3 @@ RGB_MATRIX_ENABLE = yes EEPROM_DRIVER = wear_leveling WEAR_LEVELING_DRIVER = embedded_flash -# Enter lower-power sleep mode when on the ChibiOS idle thread -OPT_DEFS += -DCORTEX_ENABLE_WFI_IDLE=TRUE - diff --git a/keyboards/keychron/v2/ansi_encoder/rules.mk b/keyboards/keychron/v2/ansi_encoder/rules.mk index 6a772965ff..5091fe9414 100644 --- a/keyboards/keychron/v2/ansi_encoder/rules.mk +++ b/keyboards/keychron/v2/ansi_encoder/rules.mk @@ -16,6 +16,3 @@ RGB_MATRIX_ENABLE = yes EEPROM_DRIVER = wear_leveling WEAR_LEVELING_DRIVER = embedded_flash -# Enter lower-power sleep mode when on the ChibiOS idle thread -OPT_DEFS += -DCORTEX_ENABLE_WFI_IDLE=TRUE - diff --git a/keyboards/keychron/v2/iso/rules.mk b/keyboards/keychron/v2/iso/rules.mk index 2b4a67b1ee..c37beecb9e 100644 --- a/keyboards/keychron/v2/iso/rules.mk +++ b/keyboards/keychron/v2/iso/rules.mk @@ -15,6 +15,3 @@ RGB_MATRIX_ENABLE = yes EEPROM_DRIVER = wear_leveling WEAR_LEVELING_DRIVER = embedded_flash -# Enter lower-power sleep mode when on the ChibiOS idle thread -OPT_DEFS += -DCORTEX_ENABLE_WFI_IDLE=TRUE - diff --git a/keyboards/keychron/v2/iso_encoder/rules.mk b/keyboards/keychron/v2/iso_encoder/rules.mk index 6a772965ff..5091fe9414 100644 --- a/keyboards/keychron/v2/iso_encoder/rules.mk +++ b/keyboards/keychron/v2/iso_encoder/rules.mk @@ -16,6 +16,3 @@ RGB_MATRIX_ENABLE = yes EEPROM_DRIVER = wear_leveling WEAR_LEVELING_DRIVER = embedded_flash -# Enter lower-power sleep mode when on the ChibiOS idle thread -OPT_DEFS += -DCORTEX_ENABLE_WFI_IDLE=TRUE - diff --git a/keyboards/keychron/v2/jis/rules.mk b/keyboards/keychron/v2/jis/rules.mk index 2b4a67b1ee..c37beecb9e 100644 --- a/keyboards/keychron/v2/jis/rules.mk +++ b/keyboards/keychron/v2/jis/rules.mk @@ -15,6 +15,3 @@ RGB_MATRIX_ENABLE = yes EEPROM_DRIVER = wear_leveling WEAR_LEVELING_DRIVER = embedded_flash -# Enter lower-power sleep mode when on the ChibiOS idle thread -OPT_DEFS += -DCORTEX_ENABLE_WFI_IDLE=TRUE - diff --git a/keyboards/keychron/v2/jis_encoder/rules.mk b/keyboards/keychron/v2/jis_encoder/rules.mk index 6a772965ff..5091fe9414 100644 --- a/keyboards/keychron/v2/jis_encoder/rules.mk +++ b/keyboards/keychron/v2/jis_encoder/rules.mk @@ -16,6 +16,3 @@ RGB_MATRIX_ENABLE = yes EEPROM_DRIVER = wear_leveling WEAR_LEVELING_DRIVER = embedded_flash -# Enter lower-power sleep mode when on the ChibiOS idle thread -OPT_DEFS += -DCORTEX_ENABLE_WFI_IDLE=TRUE - diff --git a/keyboards/keychron/v3/ansi/rules.mk b/keyboards/keychron/v3/ansi/rules.mk index 2b4a67b1ee..c37beecb9e 100644 --- a/keyboards/keychron/v3/ansi/rules.mk +++ b/keyboards/keychron/v3/ansi/rules.mk @@ -15,6 +15,3 @@ RGB_MATRIX_ENABLE = yes EEPROM_DRIVER = wear_leveling WEAR_LEVELING_DRIVER = embedded_flash -# Enter lower-power sleep mode when on the ChibiOS idle thread -OPT_DEFS += -DCORTEX_ENABLE_WFI_IDLE=TRUE - diff --git a/keyboards/keychron/v3/ansi_encoder/rules.mk b/keyboards/keychron/v3/ansi_encoder/rules.mk index 5df3cbccaf..7da353fbd1 100644 --- a/keyboards/keychron/v3/ansi_encoder/rules.mk +++ b/keyboards/keychron/v3/ansi_encoder/rules.mk @@ -16,9 +16,6 @@ RGB_MATRIX_ENABLE = yes EEPROM_DRIVER = wear_leveling WEAR_LEVELING_DRIVER = embedded_flash -# Enter lower-power sleep mode when on the ChibiOS idle thread -OPT_DEFS += -DCORTEX_ENABLE_WFI_IDLE=TRUE - # custom matrix setup CUSTOM_MATRIX = lite diff --git a/keyboards/keychron/v3/iso/rules.mk b/keyboards/keychron/v3/iso/rules.mk index 201148f39d..2eadfbded9 100644 --- a/keyboards/keychron/v3/iso/rules.mk +++ b/keyboards/keychron/v3/iso/rules.mk @@ -15,6 +15,3 @@ RGB_MATRIX_ENABLE = yes EEPROM_DRIVER = wear_leveling WEAR_LEVELING_DRIVER = embedded_flash -# Enter lower-power sleep mode when on the ChibiOS idle thread -OPT_DEFS += -DCORTEX_ENABLE_WFI_IDLE=TRUE - diff --git a/keyboards/keychron/v3/iso_encoder/rules.mk b/keyboards/keychron/v3/iso_encoder/rules.mk index 5df3cbccaf..7da353fbd1 100644 --- a/keyboards/keychron/v3/iso_encoder/rules.mk +++ b/keyboards/keychron/v3/iso_encoder/rules.mk @@ -16,9 +16,6 @@ RGB_MATRIX_ENABLE = yes EEPROM_DRIVER = wear_leveling WEAR_LEVELING_DRIVER = embedded_flash -# Enter lower-power sleep mode when on the ChibiOS idle thread -OPT_DEFS += -DCORTEX_ENABLE_WFI_IDLE=TRUE - # custom matrix setup CUSTOM_MATRIX = lite diff --git a/keyboards/keychron/v3/jis/rules.mk b/keyboards/keychron/v3/jis/rules.mk index 7f91e808b1..c37beecb9e 100644 --- a/keyboards/keychron/v3/jis/rules.mk +++ b/keyboards/keychron/v3/jis/rules.mk @@ -15,5 +15,3 @@ RGB_MATRIX_ENABLE = yes EEPROM_DRIVER = wear_leveling WEAR_LEVELING_DRIVER = embedded_flash -# Enter lower-power sleep mode when on the ChibiOS idle thread -OPT_DEFS += -DCORTEX_ENABLE_WFI_IDLE=TRUE diff --git a/keyboards/keychron/v3/jis_encoder/rules.mk b/keyboards/keychron/v3/jis_encoder/rules.mk index 5df3cbccaf..7da353fbd1 100644 --- a/keyboards/keychron/v3/jis_encoder/rules.mk +++ b/keyboards/keychron/v3/jis_encoder/rules.mk @@ -16,9 +16,6 @@ RGB_MATRIX_ENABLE = yes EEPROM_DRIVER = wear_leveling WEAR_LEVELING_DRIVER = embedded_flash -# Enter lower-power sleep mode when on the ChibiOS idle thread -OPT_DEFS += -DCORTEX_ENABLE_WFI_IDLE=TRUE - # custom matrix setup CUSTOM_MATRIX = lite diff --git a/keyboards/keychron/v4/ansi/rules.mk b/keyboards/keychron/v4/ansi/rules.mk index 6dcd47b1fe..46f5aef144 100644 --- a/keyboards/keychron/v4/ansi/rules.mk +++ b/keyboards/keychron/v4/ansi/rules.mk @@ -15,6 +15,3 @@ RGB_MATRIX_ENABLE = yes EEPROM_DRIVER = wear_leveling WEAR_LEVELING_DRIVER = embedded_flash -# Enter lower-power sleep mode when on the ChibiOS idle thread -OPT_DEFS += -DCORTEX_ENABLE_WFI_IDLE=TRUE - diff --git a/keyboards/keychron/v4/iso/rules.mk b/keyboards/keychron/v4/iso/rules.mk index 6dcd47b1fe..46f5aef144 100644 --- a/keyboards/keychron/v4/iso/rules.mk +++ b/keyboards/keychron/v4/iso/rules.mk @@ -15,6 +15,3 @@ RGB_MATRIX_ENABLE = yes EEPROM_DRIVER = wear_leveling WEAR_LEVELING_DRIVER = embedded_flash -# Enter lower-power sleep mode when on the ChibiOS idle thread -OPT_DEFS += -DCORTEX_ENABLE_WFI_IDLE=TRUE - diff --git a/keyboards/keychron/v5/ansi/rules.mk b/keyboards/keychron/v5/ansi/rules.mk index f2dba218bf..e859eb9c34 100644 --- a/keyboards/keychron/v5/ansi/rules.mk +++ b/keyboards/keychron/v5/ansi/rules.mk @@ -15,9 +15,6 @@ RGB_MATRIX_ENABLE = yes EEPROM_DRIVER = wear_leveling WEAR_LEVELING_DRIVER = embedded_flash -# Enter lower-power sleep mode when on the ChibiOS idle thread -OPT_DEFS += -DCORTEX_ENABLE_WFI_IDLE=TRUE - # custom matrix setup CUSTOM_MATRIX = lite diff --git a/keyboards/keychron/v5/ansi_encoder/rules.mk b/keyboards/keychron/v5/ansi_encoder/rules.mk index 5df3cbccaf..7da353fbd1 100644 --- a/keyboards/keychron/v5/ansi_encoder/rules.mk +++ b/keyboards/keychron/v5/ansi_encoder/rules.mk @@ -16,9 +16,6 @@ RGB_MATRIX_ENABLE = yes EEPROM_DRIVER = wear_leveling WEAR_LEVELING_DRIVER = embedded_flash -# Enter lower-power sleep mode when on the ChibiOS idle thread -OPT_DEFS += -DCORTEX_ENABLE_WFI_IDLE=TRUE - # custom matrix setup CUSTOM_MATRIX = lite diff --git a/keyboards/keychron/v5/iso/rules.mk b/keyboards/keychron/v5/iso/rules.mk index f2dba218bf..e859eb9c34 100644 --- a/keyboards/keychron/v5/iso/rules.mk +++ b/keyboards/keychron/v5/iso/rules.mk @@ -15,9 +15,6 @@ RGB_MATRIX_ENABLE = yes EEPROM_DRIVER = wear_leveling WEAR_LEVELING_DRIVER = embedded_flash -# Enter lower-power sleep mode when on the ChibiOS idle thread -OPT_DEFS += -DCORTEX_ENABLE_WFI_IDLE=TRUE - # custom matrix setup CUSTOM_MATRIX = lite diff --git a/keyboards/keychron/v5/iso_encoder/rules.mk b/keyboards/keychron/v5/iso_encoder/rules.mk index 5df3cbccaf..7da353fbd1 100644 --- a/keyboards/keychron/v5/iso_encoder/rules.mk +++ b/keyboards/keychron/v5/iso_encoder/rules.mk @@ -16,9 +16,6 @@ RGB_MATRIX_ENABLE = yes EEPROM_DRIVER = wear_leveling WEAR_LEVELING_DRIVER = embedded_flash -# Enter lower-power sleep mode when on the ChibiOS idle thread -OPT_DEFS += -DCORTEX_ENABLE_WFI_IDLE=TRUE - # custom matrix setup CUSTOM_MATRIX = lite diff --git a/keyboards/keychron/v6/ansi/rules.mk b/keyboards/keychron/v6/ansi/rules.mk index de86b770f3..980311d3f2 100644 --- a/keyboards/keychron/v6/ansi/rules.mk +++ b/keyboards/keychron/v6/ansi/rules.mk @@ -15,9 +15,6 @@ RGB_MATRIX_ENABLE = yes EEPROM_DRIVER = wear_leveling WEAR_LEVELING_DRIVER = embedded_flash -# Enter lower-power sleep mode when on the ChibiOS idle thread -OPT_DEFS += -DCORTEX_ENABLE_WFI_IDLE=TRUE - # custom matrix setup CUSTOM_MATRIX = lite diff --git a/keyboards/keychron/v6/ansi_encoder/rules.mk b/keyboards/keychron/v6/ansi_encoder/rules.mk index 9958a466f6..80a3f300bd 100644 --- a/keyboards/keychron/v6/ansi_encoder/rules.mk +++ b/keyboards/keychron/v6/ansi_encoder/rules.mk @@ -16,9 +16,6 @@ RGB_MATRIX_ENABLE = yes EEPROM_DRIVER = wear_leveling WEAR_LEVELING_DRIVER = embedded_flash -# Enter lower-power sleep mode when on the ChibiOS idle thread -OPT_DEFS += -DCORTEX_ENABLE_WFI_IDLE=TRUE - # custom matrix setup CUSTOM_MATRIX = lite diff --git a/keyboards/keychron/v6/iso/rules.mk b/keyboards/keychron/v6/iso/rules.mk index de86b770f3..980311d3f2 100644 --- a/keyboards/keychron/v6/iso/rules.mk +++ b/keyboards/keychron/v6/iso/rules.mk @@ -15,9 +15,6 @@ RGB_MATRIX_ENABLE = yes EEPROM_DRIVER = wear_leveling WEAR_LEVELING_DRIVER = embedded_flash -# Enter lower-power sleep mode when on the ChibiOS idle thread -OPT_DEFS += -DCORTEX_ENABLE_WFI_IDLE=TRUE - # custom matrix setup CUSTOM_MATRIX = lite diff --git a/keyboards/keychron/v6/iso_encoder/rules.mk b/keyboards/keychron/v6/iso_encoder/rules.mk index df920055a0..9867724957 100644 --- a/keyboards/keychron/v6/iso_encoder/rules.mk +++ b/keyboards/keychron/v6/iso_encoder/rules.mk @@ -16,9 +16,6 @@ RGB_MATRIX_ENABLE = yes EEPROM_DRIVER = wear_leveling WEAR_LEVELING_DRIVER = embedded_flash -# Enter lower-power sleep mode when on the ChibiOS idle thread -OPT_DEFS += -DCORTEX_ENABLE_WFI_IDLE=TRUE - # custom matrix setup CUSTOM_MATRIX = lite diff --git a/keyboards/keychron/v7/ansi/rules.mk b/keyboards/keychron/v7/ansi/rules.mk index 6dcd47b1fe..46f5aef144 100644 --- a/keyboards/keychron/v7/ansi/rules.mk +++ b/keyboards/keychron/v7/ansi/rules.mk @@ -15,6 +15,3 @@ RGB_MATRIX_ENABLE = yes EEPROM_DRIVER = wear_leveling WEAR_LEVELING_DRIVER = embedded_flash -# Enter lower-power sleep mode when on the ChibiOS idle thread -OPT_DEFS += -DCORTEX_ENABLE_WFI_IDLE=TRUE - diff --git a/keyboards/keychron/v7/iso/rules.mk b/keyboards/keychron/v7/iso/rules.mk index 6dcd47b1fe..46f5aef144 100644 --- a/keyboards/keychron/v7/iso/rules.mk +++ b/keyboards/keychron/v7/iso/rules.mk @@ -15,6 +15,3 @@ RGB_MATRIX_ENABLE = yes EEPROM_DRIVER = wear_leveling WEAR_LEVELING_DRIVER = embedded_flash -# Enter lower-power sleep mode when on the ChibiOS idle thread -OPT_DEFS += -DCORTEX_ENABLE_WFI_IDLE=TRUE - diff --git a/keyboards/keychron/v8/ansi/rules.mk b/keyboards/keychron/v8/ansi/rules.mk index bdb97dbf1c..e506e322d5 100644 --- a/keyboards/keychron/v8/ansi/rules.mk +++ b/keyboards/keychron/v8/ansi/rules.mk @@ -17,6 +17,3 @@ RGB_MATRIX_ENABLE = yes EEPROM_DRIVER = wear_leveling WEAR_LEVELING_DRIVER = embedded_flash -# Enter lower-power sleep mode when on the ChibiOS idle thread -OPT_DEFS += -DCORTEX_ENABLE_WFI_IDLE=TRUE - diff --git a/keyboards/keychron/v8/ansi_encoder/rules.mk b/keyboards/keychron/v8/ansi_encoder/rules.mk index d2bee999c8..e3b0d8f03f 100644 --- a/keyboards/keychron/v8/ansi_encoder/rules.mk +++ b/keyboards/keychron/v8/ansi_encoder/rules.mk @@ -17,6 +17,3 @@ RGB_MATRIX_ENABLE = yes EEPROM_DRIVER = wear_leveling WEAR_LEVELING_DRIVER = embedded_flash -# Enter lower-power sleep mode when on the ChibiOS idle thread -OPT_DEFS += -DCORTEX_ENABLE_WFI_IDLE=TRUE - diff --git a/keyboards/keychron/v8/iso/rules.mk b/keyboards/keychron/v8/iso/rules.mk index fec3d8d15c..8edab2465b 100644 --- a/keyboards/keychron/v8/iso/rules.mk +++ b/keyboards/keychron/v8/iso/rules.mk @@ -16,6 +16,3 @@ RGB_MATRIX_ENABLE = yes EEPROM_DRIVER = wear_leveling WEAR_LEVELING_DRIVER = embedded_flash -# Enter lower-power sleep mode when on the ChibiOS idle thread -OPT_DEFS += -DCORTEX_ENABLE_WFI_IDLE=TRUE - diff --git a/keyboards/keychron/v8/iso_encoder/rules.mk b/keyboards/keychron/v8/iso_encoder/rules.mk index d2bee999c8..e3b0d8f03f 100644 --- a/keyboards/keychron/v8/iso_encoder/rules.mk +++ b/keyboards/keychron/v8/iso_encoder/rules.mk @@ -17,6 +17,3 @@ RGB_MATRIX_ENABLE = yes EEPROM_DRIVER = wear_leveling WEAR_LEVELING_DRIVER = embedded_flash -# Enter lower-power sleep mode when on the ChibiOS idle thread -OPT_DEFS += -DCORTEX_ENABLE_WFI_IDLE=TRUE - diff --git a/keyboards/keygem/kg60ansi/config.h b/keyboards/keygem/kg60ansi/config.h index d2cf17fe2b..cf2fe9e01b 100644 --- a/keyboards/keygem/kg60ansi/config.h +++ b/keyboards/keygem/kg60ansi/config.h @@ -23,7 +23,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #define LOCKING_RESYNC_ENABLE /* Define RGB Underglow */ -#define RGBLED_NUM 64 #define RGBLIGHT_EFFECT_BREATHING #define RGBLIGHT_EFFECT_RAINBOW_MOOD #define RGBLIGHT_EFFECT_RAINBOW_SWIRL diff --git a/keyboards/keygem/kg60ansi/info.json b/keyboards/keygem/kg60ansi/info.json index 2d4fa5365b..cf9e7837a8 100644 --- a/keyboards/keygem/kg60ansi/info.json +++ b/keyboards/keygem/kg60ansi/info.json @@ -12,6 +12,7 @@ "pin": "F7" }, "rgblight": { + "led_count": 64, "max_brightness": 108 }, "matrix_pins": { diff --git a/keyboards/keygem/kg65rgbv2/config.h b/keyboards/keygem/kg65rgbv2/config.h index ab1fab73ff..cf2fe9e01b 100644 --- a/keyboards/keygem/kg65rgbv2/config.h +++ b/keyboards/keygem/kg65rgbv2/config.h @@ -23,7 +23,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #define LOCKING_RESYNC_ENABLE /* Define RGB Underglow */ -#define RGBLED_NUM 68 #define RGBLIGHT_EFFECT_BREATHING #define RGBLIGHT_EFFECT_RAINBOW_MOOD #define RGBLIGHT_EFFECT_RAINBOW_SWIRL diff --git a/keyboards/keygem/kg65rgbv2/info.json b/keyboards/keygem/kg65rgbv2/info.json index 8dccdc233d..a0e34eba71 100644 --- a/keyboards/keygem/kg65rgbv2/info.json +++ b/keyboards/keygem/kg65rgbv2/info.json @@ -12,6 +12,7 @@ "pin": "F7" }, "rgblight": { + "led_count": 68, "max_brightness": 96 }, "matrix_pins": { diff --git a/keyboards/keyhive/absinthe/config.h b/keyboards/keyhive/absinthe/config.h index c916ffc430..e303f99372 100644 --- a/keyboards/keyhive/absinthe/config.h +++ b/keyboards/keyhive/absinthe/config.h @@ -17,11 +17,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #pragma once - #define RGBLED_NUM 32 - #define RGBLIGHT_HUE_STEP 8 - #define RGBLIGHT_SAT_STEP 8 - #define RGBLIGHT_VAL_STEP 8 - #define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */ #define RGBLIGHT_EFFECT_BREATHING #define RGBLIGHT_EFFECT_RAINBOW_MOOD #define RGBLIGHT_EFFECT_RAINBOW_SWIRL diff --git a/keyboards/keyhive/absinthe/info.json b/keyboards/keyhive/absinthe/info.json index 8001d6db01..78c558b032 100644 --- a/keyboards/keyhive/absinthe/info.json +++ b/keyboards/keyhive/absinthe/info.json @@ -8,6 +8,12 @@ "pid": "0xFEED", "device_version": "0.0.1" }, + "rgblight": { + "saturation_steps": 8, + "brightness_steps": 8, + "led_count": 32, + "sleep": true + }, "ws2812": { "pin": "B0" }, diff --git a/keyboards/keyhive/ergosaurus/config.h b/keyboards/keyhive/ergosaurus/config.h index e7de4ca7bd..e87ada125b 100644 --- a/keyboards/keyhive/ergosaurus/config.h +++ b/keyboards/keyhive/ergosaurus/config.h @@ -18,11 +18,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #pragma once #ifdef RGBLIGHT_ENABLE - #define RGBLED_NUM 32 - #define RGBLIGHT_HUE_STEP 8 - #define RGBLIGHT_SAT_STEP 8 - #define RGBLIGHT_VAL_STEP 8 - #define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */ #define RGBLIGHT_EFFECT_BREATHING #define RGBLIGHT_EFFECT_RAINBOW_MOOD #define RGBLIGHT_EFFECT_RAINBOW_SWIRL diff --git a/keyboards/keyhive/ergosaurus/info.json b/keyboards/keyhive/ergosaurus/info.json index 28461eaf85..cca059f667 100644 --- a/keyboards/keyhive/ergosaurus/info.json +++ b/keyboards/keyhive/ergosaurus/info.json @@ -11,7 +11,11 @@ "pin": "B6" }, "rgblight": { - "max_brightness": 200 + "saturation_steps": 8, + "brightness_steps": 8, + "led_count": 32, + "max_brightness": 200, + "sleep": true }, "matrix_pins": { "cols": ["D7", "C6", "D0", "D1", "F7", "B1", "B3", "B2"], diff --git a/keyboards/keyhive/smallice/config.h b/keyboards/keyhive/smallice/config.h index 7113cd26e9..2cd149f6eb 100644 --- a/keyboards/keyhive/smallice/config.h +++ b/keyboards/keyhive/smallice/config.h @@ -17,11 +17,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #pragma once -# define RGBLED_NUM 12 -# define RGBLIGHT_HUE_STEP 8 -# define RGBLIGHT_SAT_STEP 8 -# define RGBLIGHT_VAL_STEP 8 -# define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */ # define RGBLIGHT_EFFECT_BREATHING # define RGBLIGHT_EFFECT_RAINBOW_MOOD # define RGBLIGHT_EFFECT_RAINBOW_SWIRL diff --git a/keyboards/keyhive/smallice/info.json b/keyboards/keyhive/smallice/info.json index afe95e7aa7..5e48c53c5a 100644 --- a/keyboards/keyhive/smallice/info.json +++ b/keyboards/keyhive/smallice/info.json @@ -8,6 +8,12 @@ "pid": "0x5341", "device_version": "0.0.1" }, + "rgblight": { + "saturation_steps": 8, + "brightness_steps": 8, + "led_count": 12, + "sleep": true + }, "ws2812": { "pin": "B7" }, diff --git a/keyboards/keyhive/uno/rev1/config.h b/keyboards/keyhive/uno/rev1/config.h index 414590f643..2783955239 100644 --- a/keyboards/keyhive/uno/rev1/config.h +++ b/keyboards/keyhive/uno/rev1/config.h @@ -17,7 +17,3 @@ #pragma once #define RGBLIGHT_EFFECT_RAINBOW_MOOD - -#ifdef RGBLIGHT_ENABLE -#define RGBLED_NUM 1 -#endif diff --git a/keyboards/keyhive/uno/rev1/info.json b/keyboards/keyhive/uno/rev1/info.json index 69fe9afd77..7e5030ba2a 100644 --- a/keyboards/keyhive/uno/rev1/info.json +++ b/keyboards/keyhive/uno/rev1/info.json @@ -3,6 +3,9 @@ "usb": { "device_version": "0.0.1" }, + "rgblight": { + "led_count": 1 + }, "ws2812": { "pin": "F6" }, diff --git a/keyboards/keyhive/uno/rev2/config.h b/keyboards/keyhive/uno/rev2/config.h index 414590f643..2783955239 100644 --- a/keyboards/keyhive/uno/rev2/config.h +++ b/keyboards/keyhive/uno/rev2/config.h @@ -17,7 +17,3 @@ #pragma once #define RGBLIGHT_EFFECT_RAINBOW_MOOD - -#ifdef RGBLIGHT_ENABLE -#define RGBLED_NUM 1 -#endif diff --git a/keyboards/keyhive/uno/rev2/info.json b/keyboards/keyhive/uno/rev2/info.json index 0af41bab77..cfa07576da 100644 --- a/keyboards/keyhive/uno/rev2/info.json +++ b/keyboards/keyhive/uno/rev2/info.json @@ -3,6 +3,9 @@ "usb": { "device_version": "0.0.2" }, + "rgblight": { + "led_count": 1 + }, "ws2812": { "pin": "D1" }, diff --git a/keyboards/keyhive/ut472/config.h b/keyboards/keyhive/ut472/config.h index 5ab9348126..f13992154d 100644 --- a/keyboards/keyhive/ut472/config.h +++ b/keyboards/keyhive/ut472/config.h @@ -31,7 +31,3 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #define RGBLIGHT_EFFECT_RGB_TEST #define RGBLIGHT_EFFECT_ALTERNATING #define RGBLIGHT_EFFECT_TWINKLE -#define RGBLED_NUM 8 -#define RGBLIGHT_HUE_STEP 8 -#define RGBLIGHT_SAT_STEP 8 -#define RGBLIGHT_VAL_STEP 8 diff --git a/keyboards/keyhive/ut472/info.json b/keyboards/keyhive/ut472/info.json index 9755bd6569..d2211016e7 100644 --- a/keyboards/keyhive/ut472/info.json +++ b/keyboards/keyhive/ut472/info.json @@ -8,6 +8,11 @@ "pid": "0x0472", "device_version": "0.0.2" }, + "rgblight": { + "saturation_steps": 8, + "brightness_steps": 8, + "led_count": 8 + }, "ws2812": { "pin": "C6" }, diff --git a/keyboards/keyquest/enclave/config.h b/keyboards/keyquest/enclave/config.h index 012d53a36b..4a3694901d 100644 --- a/keyboards/keyquest/enclave/config.h +++ b/keyboards/keyquest/enclave/config.h @@ -13,13 +13,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #pragma once -/* RGB light setup*/ -#define RGBLED_NUM 2 -#define RGBLIGHT_SLEEP -#define RGBLIGHT_HUE_STEP 10 -#define RGBLIGHT_SAT_STEP 17 -#define RGBLIGHT_VAL_STEP 17 - /* RGB light animations*/ #define RGBLIGHT_EFFECT_BREATHING #define RGBLIGHT_EFFECT_RAINBOW_MOOD diff --git a/keyboards/keyquest/enclave/info.json b/keyboards/keyquest/enclave/info.json index 8135d7fec2..9a9f438d97 100644 --- a/keyboards/keyquest/enclave/info.json +++ b/keyboards/keyquest/enclave/info.json @@ -11,7 +11,10 @@ "pin": "B5" }, "rgblight": { - "max_brightness": 200 + "hue_steps": 10, + "led_count": 2, + "max_brightness": 200, + "sleep": true }, "matrix_pins": { "cols": ["B4", "B7", "C7"], diff --git a/keyboards/keysofkings/twokey/config.h b/keyboards/keysofkings/twokey/config.h index 6fea0e2cb6..e28c779915 100755 --- a/keyboards/keysofkings/twokey/config.h +++ b/keyboards/keysofkings/twokey/config.h @@ -33,10 +33,6 @@ #define RGBLIGHT_EFFECT_RGB_TEST #define RGBLIGHT_EFFECT_ALTERNATING #define RGBLIGHT_EFFECT_TWINKLE -#define RGBLED_NUM 5 -#define RGBLIGHT_HUE_STEP 4 -#define RGBLIGHT_SAT_STEP 4 -#define RGBLIGHT_VAL_STEP 4 #define AUDIO_PIN B6 #define AUDIO_CLICKY #endif diff --git a/keyboards/keysofkings/twokey/info.json b/keyboards/keysofkings/twokey/info.json index 8040b94fac..e6c75a2b41 100644 --- a/keyboards/keysofkings/twokey/info.json +++ b/keyboards/keysofkings/twokey/info.json @@ -8,6 +8,12 @@ "pid": "0xAE12", "device_version": "0.0.1" }, + "rgblight": { + "hue_steps": 4, + "saturation_steps": 4, + "brightness_steps": 4, + "led_count": 5 + }, "ws2812": { "pin": "D3" }, diff --git a/keyboards/keystonecaps/gameroyadvance/config.h b/keyboards/keystonecaps/gameroyadvance/config.h index adca3366f2..11e149c6be 100644 --- a/keyboards/keystonecaps/gameroyadvance/config.h +++ b/keyboards/keystonecaps/gameroyadvance/config.h @@ -33,7 +33,3 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #define RGBLIGHT_EFFECT_RGB_TEST #define RGBLIGHT_EFFECT_ALTERNATING #define RGBLIGHT_EFFECT_TWINKLE -#define RGBLED_NUM 0 -#define RGBLIGHT_HUE_STEP 8 -#define RGBLIGHT_SAT_STEP 8 -#define RGBLIGHT_VAL_STEP 8 diff --git a/keyboards/keystonecaps/gameroyadvance/info.json b/keyboards/keystonecaps/gameroyadvance/info.json index 884bc706e4..2aca3411ae 100644 --- a/keyboards/keystonecaps/gameroyadvance/info.json +++ b/keyboards/keystonecaps/gameroyadvance/info.json @@ -18,6 +18,11 @@ {"pin_a": "B5", "pin_b": "B4"} ] }, + "rgblight": { + "saturation_steps": 8, + "brightness_steps": 8, + "led_count": 0 + }, "ws2812": { "pin": "C7" }, diff --git a/keyboards/kikoslab/ellora65/config.h b/keyboards/kikoslab/ellora65/config.h deleted file mode 100644 index c6fba5ebcf..0000000000 --- a/keyboards/kikoslab/ellora65/config.h +++ /dev/null @@ -1,21 +0,0 @@ -/* -Copyright 2021 Swiftrax <swiftrax@gmail.com> - -This program is free software: you can redistribute it and/or modify -it under the terms of the GNU General Public License as published by -the Free Software Foundation, either version 2 of the License, or -(at your option) any later version. - -This program is distributed in the hope that it will be useful, -but WITHOUT ANY WARRANTY; without even the implied warranty of -MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -GNU General Public License for more details. - -You should have received a copy of the GNU General Public License -along with this program. If not, see <http://www.gnu.org/licenses/>. -*/ - -#pragma once - -/*RGB TINGS*/ -#define RGBLED_NUM 12 diff --git a/keyboards/kikoslab/ellora65/info.json b/keyboards/kikoslab/ellora65/info.json index 5f3646476b..0ab7f7015a 100644 --- a/keyboards/kikoslab/ellora65/info.json +++ b/keyboards/kikoslab/ellora65/info.json @@ -18,6 +18,9 @@ {"pin_a": "B0", "pin_b": "B1"} ] }, + "rgblight": { + "led_count": 12 + }, "ws2812": { "pin": "E6" }, diff --git a/keyboards/kin80/blackpill103/rules.mk b/keyboards/kin80/blackpill103/rules.mk index a92b099328..8b13789179 100644 --- a/keyboards/kin80/blackpill103/rules.mk +++ b/keyboards/kin80/blackpill103/rules.mk @@ -1,2 +1 @@ -# Enter lower-power sleep mode when on the ChibiOS idle thread -OPT_DEFS += -DCORTEX_ENABLE_WFI_IDLE=TRUE + diff --git a/keyboards/kinesis/keymaps/tw1t611/keymap.c b/keyboards/kinesis/keymaps/tw1t611/keymap.c index 0a812aef35..f4197822ea 100644 --- a/keyboards/kinesis/keymaps/tw1t611/keymap.c +++ b/keyboards/kinesis/keymaps/tw1t611/keymap.c @@ -46,19 +46,3 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { _______,_______ ,_______ ) }; - -void matrix_init_user(void) { - -} - -void matrix_scan_user(void) { - -} - -bool process_record_user(uint16_t keycode, keyrecord_t *record) { - return true; -} - -void led_set_user(uint8_t usb_led) { - -} diff --git a/keyboards/kingly_keys/ave/config.h b/keyboards/kingly_keys/ave/config.h index af9ffae03d..8d024b26a5 100644 --- a/keyboards/kingly_keys/ave/config.h +++ b/keyboards/kingly_keys/ave/config.h @@ -18,7 +18,6 @@ #pragma once #if defined(RGBLIGHT_ENABLE) -# define RGBLED_NUM 2 # define RGBLIGHT_EFFECT_BREATHING #endif diff --git a/keyboards/kingly_keys/ave/ortho/info.json b/keyboards/kingly_keys/ave/ortho/info.json index 0de5b82bdd..c3fb2f83d5 100644 --- a/keyboards/kingly_keys/ave/ortho/info.json +++ b/keyboards/kingly_keys/ave/ortho/info.json @@ -18,6 +18,9 @@ {"pin_a": "B2", "pin_b": "B1"} ] }, + "rgblight": { + "led_count": 2 + }, "ws2812": { "pin": "B7" }, diff --git a/keyboards/kingly_keys/ave/staggered/info.json b/keyboards/kingly_keys/ave/staggered/info.json index b3795f8101..9a86093a72 100644 --- a/keyboards/kingly_keys/ave/staggered/info.json +++ b/keyboards/kingly_keys/ave/staggered/info.json @@ -18,6 +18,9 @@ {"pin_a": "B2", "pin_b": "B1"} ] }, + "rgblight": { + "led_count": 2 + }, "ws2812": { "pin": "B7" }, diff --git a/keyboards/kingly_keys/little_foot/config.h b/keyboards/kingly_keys/little_foot/config.h index fe391e91a1..02a1b0d15e 100644 --- a/keyboards/kingly_keys/little_foot/config.h +++ b/keyboards/kingly_keys/little_foot/config.h @@ -22,9 +22,6 @@ /* Locking resynchronize hack */ #define LOCKING_RESYNC_ENABLE -/* ws2812 RGB LED */ -#define RGBLED_NUM 10 // Number of LEDs - #define RGBLIGHT_EFFECT_BREATHING #define RGBLIGHT_EFFECT_RAINBOW_MOOD #define RGBLIGHT_EFFECT_RAINBOW_SWIRL @@ -35,6 +32,3 @@ #define RGBLIGHT_EFFECT_RGB_TEST #define RGBLIGHT_EFFECT_ALTERNATING #define RGBLIGHT_EFFECT_TWINKLE -#define RGBLIGHT_HUE_STEP 6 -#define RGBLIGHT_SAT_STEP 4 -#define RGBLIGHT_VAL_STEP 8 diff --git a/keyboards/kingly_keys/little_foot/info.json b/keyboards/kingly_keys/little_foot/info.json index c3dfe66910..ccd2a04aa6 100644 --- a/keyboards/kingly_keys/little_foot/info.json +++ b/keyboards/kingly_keys/little_foot/info.json @@ -9,6 +9,12 @@ "device_version": "0.0.1", "force_nkro": true }, + "rgblight": { + "hue_steps": 6, + "saturation_steps": 4, + "brightness_steps": 8, + "led_count": 10 + }, "ws2812": { "pin": "F4" }, diff --git a/keyboards/kingly_keys/romac/config.h b/keyboards/kingly_keys/romac/config.h index 0f5a7a6d7f..5f36081323 100644 --- a/keyboards/kingly_keys/romac/config.h +++ b/keyboards/kingly_keys/romac/config.h @@ -5,8 +5,3 @@ /* Locking resynchronize hack */ #define LOCKING_RESYNC_ENABLE - -#define RGBLED_NUM 0 -#define RGBLIGHT_HUE_STEP 8 -#define RGBLIGHT_SAT_STEP 8 -#define RGBLIGHT_VAL_STEP 8 diff --git a/keyboards/kingly_keys/romac_plus/config.h b/keyboards/kingly_keys/romac_plus/config.h index 2d715dbe51..d702489ee7 100644 --- a/keyboards/kingly_keys/romac_plus/config.h +++ b/keyboards/kingly_keys/romac_plus/config.h @@ -6,9 +6,6 @@ /* Locking resynchronize hack */ #define LOCKING_RESYNC_ENABLE -/* ws2812 RGB LED */ -#define RGBLED_NUM 4 // Number of LEDs - #define RGBLIGHT_EFFECT_BREATHING #define RGBLIGHT_EFFECT_RAINBOW_MOOD #define RGBLIGHT_EFFECT_RAINBOW_SWIRL @@ -19,6 +16,3 @@ #define RGBLIGHT_EFFECT_RGB_TEST #define RGBLIGHT_EFFECT_ALTERNATING #define RGBLIGHT_EFFECT_TWINKLE -#define RGBLIGHT_HUE_STEP 6 -#define RGBLIGHT_SAT_STEP 4 -#define RGBLIGHT_VAL_STEP 8 diff --git a/keyboards/kingly_keys/romac_plus/info.json b/keyboards/kingly_keys/romac_plus/info.json index a5bb27e397..51e032ad52 100644 --- a/keyboards/kingly_keys/romac_plus/info.json +++ b/keyboards/kingly_keys/romac_plus/info.json @@ -18,6 +18,12 @@ {"pin_a": "B3", "pin_b": "B2"} ] }, + "rgblight": { + "hue_steps": 6, + "saturation_steps": 4, + "brightness_steps": 8, + "led_count": 4 + }, "ws2812": { "pin": "F7" }, diff --git a/keyboards/kingly_keys/romac_plus/keymaps/default/keymap.c b/keyboards/kingly_keys/romac_plus/keymaps/default/keymap.c index 62c2349150..ce84abb24d 100644 --- a/keyboards/kingly_keys/romac_plus/keymaps/default/keymap.c +++ b/keyboards/kingly_keys/romac_plus/keymaps/default/keymap.c @@ -57,10 +57,10 @@ bool oled_task_user(void) { } // Host Keyboard LED Status - uint8_t led_usb_state = host_keyboard_leds(); - oled_write_P(IS_LED_ON(led_usb_state, USB_LED_NUM_LOCK) ? PSTR("NLCK ") : PSTR(" "), false); - oled_write_P(IS_LED_ON(led_usb_state, USB_LED_CAPS_LOCK) ? PSTR("CAPS ") : PSTR(" "), false); - oled_write_P(IS_LED_ON(led_usb_state, USB_LED_SCROLL_LOCK) ? PSTR("SCRLK") : PSTR(" "), false); + led_t led_state = host_keyboard_led_state(); + oled_write_P(led_state.num_lock ? PSTR("NLCK ") : PSTR(" "), false); + oled_write_P(led_state.caps_lock ? PSTR("CAPS ") : PSTR(" "), false); + oled_write_P(led_state.scroll_lock ? PSTR("SCRLK") : PSTR(" "), false); return false; } diff --git a/keyboards/kingly_keys/ropro/config.h b/keyboards/kingly_keys/ropro/config.h index 3dba502238..8d94471592 100644 --- a/keyboards/kingly_keys/ropro/config.h +++ b/keyboards/kingly_keys/ropro/config.h @@ -22,8 +22,6 @@ /* Locking resynchronize hack */ #define LOCKING_RESYNC_ENABLE -#define RGBLED_NUM 18 - #define RGBLIGHT_EFFECT_BREATHING #define RGBLIGHT_EFFECT_RAINBOW_MOOD #define RGBLIGHT_EFFECT_RAINBOW_SWIRL diff --git a/keyboards/kingly_keys/ropro/info.json b/keyboards/kingly_keys/ropro/info.json index ad77ae5608..598598b100 100644 --- a/keyboards/kingly_keys/ropro/info.json +++ b/keyboards/kingly_keys/ropro/info.json @@ -18,6 +18,9 @@ {"pin_a": "B7", "pin_b": "D5"} ] }, + "rgblight": { + "led_count": 18 + }, "ws2812": { "pin": "D3" }, diff --git a/keyboards/kingly_keys/smd_milk/config.h b/keyboards/kingly_keys/smd_milk/config.h index cb3fcd2e0d..9866e14319 100644 --- a/keyboards/kingly_keys/smd_milk/config.h +++ b/keyboards/kingly_keys/smd_milk/config.h @@ -21,9 +21,6 @@ /* Locking resynchronize hack */ #define LOCKING_RESYNC_ENABLE -/* ws2812 RGB LED */ -#define RGBLED_NUM 4 // Number of LEDs - #define RGBLIGHT_EFFECT_BREATHING #define RGBLIGHT_EFFECT_RAINBOW_MOOD #define RGBLIGHT_EFFECT_RAINBOW_SWIRL @@ -34,7 +31,3 @@ #define RGBLIGHT_EFFECT_RGB_TEST #define RGBLIGHT_EFFECT_ALTERNATING #define RGBLIGHT_EFFECT_TWINKLE - -#define RGBLIGHT_HUE_STEP 6 -#define RGBLIGHT_SAT_STEP 4 -#define RGBLIGHT_VAL_STEP 10 diff --git a/keyboards/kingly_keys/smd_milk/info.json b/keyboards/kingly_keys/smd_milk/info.json index d2f408e51f..0a16a3d3b7 100644 --- a/keyboards/kingly_keys/smd_milk/info.json +++ b/keyboards/kingly_keys/smd_milk/info.json @@ -9,6 +9,12 @@ "device_version": "0.0.1", "force_nkro": true }, + "rgblight": { + "hue_steps": 6, + "saturation_steps": 4, + "brightness_steps": 10, + "led_count": 4 + }, "ws2812": { "pin": "B3" }, diff --git a/keyboards/kingly_keys/soap/config.h b/keyboards/kingly_keys/soap/config.h index 682f1a7531..adce2a42d5 100644 --- a/keyboards/kingly_keys/soap/config.h +++ b/keyboards/kingly_keys/soap/config.h @@ -30,4 +30,3 @@ #define RGBLIGHT_EFFECT_RGB_TEST #define RGBLIGHT_EFFECT_ALTERNATING #define RGBLIGHT_EFFECT_TWINKLE -#define RGBLED_NUM 3 diff --git a/keyboards/kingly_keys/soap/info.json b/keyboards/kingly_keys/soap/info.json index b10260aa0b..74a51ead57 100644 --- a/keyboards/kingly_keys/soap/info.json +++ b/keyboards/kingly_keys/soap/info.json @@ -8,6 +8,9 @@ "pid": "0x0003", "device_version": "0.0.4" }, + "rgblight": { + "led_count": 3 + }, "ws2812": { "pin": "B6" }, diff --git a/keyboards/kira75/config.h b/keyboards/kira75/config.h index b51a90cb7e..62c2837ebe 100644 --- a/keyboards/kira75/config.h +++ b/keyboards/kira75/config.h @@ -27,10 +27,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #define RGBLIGHT_EFFECT_RGB_TEST #define RGBLIGHT_EFFECT_ALTERNATING #define RGBLIGHT_EFFECT_TWINKLE -#define RGBLED_NUM 18 -#define RGBLIGHT_HUE_STEP 8 -#define RGBLIGHT_SAT_STEP 8 -#define RGBLIGHT_VAL_STEP 8 /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ #define LOCKING_SUPPORT_ENABLE diff --git a/keyboards/kira75/info.json b/keyboards/kira75/info.json index 48e4bdf85e..5d573208d5 100644 --- a/keyboards/kira75/info.json +++ b/keyboards/kira75/info.json @@ -17,6 +17,11 @@ "pin": "B7", "breathing": true }, + "rgblight": { + "saturation_steps": 8, + "brightness_steps": 8, + "led_count": 18 + }, "ws2812": { "pin": "E2" }, diff --git a/keyboards/kiwikey/borderland/config.h b/keyboards/kiwikey/borderland/config.h index 541c8b45e2..c930dd1f09 100644 --- a/keyboards/kiwikey/borderland/config.h +++ b/keyboards/kiwikey/borderland/config.h @@ -3,13 +3,6 @@ #pragma once -#define TAP_CODE_DELAY 10 - -#define RGBLED_NUM 18 -#define RGBLIGHT_HUE_STEP 8 -#define RGBLIGHT_SAT_STEP 8 -#define RGBLIGHT_VAL_STEP 8 -//# define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */ #define RGBLIGHT_EFFECT_BREATHING #define RGBLIGHT_EFFECT_RAINBOW_MOOD #define RGBLIGHT_EFFECT_RAINBOW_SWIRL diff --git a/keyboards/kiwikey/borderland/info.json b/keyboards/kiwikey/borderland/info.json index 7ecd81e07b..cf8b655ba2 100644 --- a/keyboards/kiwikey/borderland/info.json +++ b/keyboards/kiwikey/borderland/info.json @@ -18,6 +18,14 @@ {"pin_a": "F5", "pin_b": "F6"} ] }, + "qmk": { + "tap_keycode_delay": 10 + }, + "rgblight": { + "saturation_steps": 8, + "brightness_steps": 8, + "led_count": 18 + }, "ws2812": { "pin": "B2" }, diff --git a/keyboards/kiwikey/kawii9/config.h b/keyboards/kiwikey/kawii9/config.h index ceaf40636e..f78a089fa2 100644 --- a/keyboards/kiwikey/kawii9/config.h +++ b/keyboards/kiwikey/kawii9/config.h @@ -17,11 +17,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #pragma once -#define RGBLED_NUM 4 -#define RGBLIGHT_HUE_STEP 8 -#define RGBLIGHT_SAT_STEP 8 -#define RGBLIGHT_VAL_STEP 8 -//# define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */ #define RGBLIGHT_EFFECT_BREATHING #define RGBLIGHT_EFFECT_RAINBOW_MOOD #define RGBLIGHT_EFFECT_RAINBOW_SWIRL diff --git a/keyboards/kiwikey/kawii9/info.json b/keyboards/kiwikey/kawii9/info.json index 7537e7fe8a..e8e1fe0e89 100644 --- a/keyboards/kiwikey/kawii9/info.json +++ b/keyboards/kiwikey/kawii9/info.json @@ -8,6 +8,11 @@ "pid": "0x0303", "device_version": "0.0.2" }, + "rgblight": { + "saturation_steps": 8, + "brightness_steps": 8, + "led_count": 4 + }, "ws2812": { "pin": "D3" }, diff --git a/keyboards/kiwikey/wanderland/config.h b/keyboards/kiwikey/wanderland/config.h index 223620c5fe..81d3bfb453 100644 --- a/keyboards/kiwikey/wanderland/config.h +++ b/keyboards/kiwikey/wanderland/config.h @@ -17,11 +17,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #pragma once -#define RGBLED_NUM 18 -#define RGBLIGHT_HUE_STEP 8 -#define RGBLIGHT_SAT_STEP 8 -#define RGBLIGHT_VAL_STEP 8 -#define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */ #define RGBLIGHT_EFFECT_BREATHING #define RGBLIGHT_EFFECT_RAINBOW_MOOD #define RGBLIGHT_EFFECT_RAINBOW_SWIRL diff --git a/keyboards/kiwikey/wanderland/info.json b/keyboards/kiwikey/wanderland/info.json index eb41a349d0..5b0ba53294 100644 --- a/keyboards/kiwikey/wanderland/info.json +++ b/keyboards/kiwikey/wanderland/info.json @@ -17,6 +17,12 @@ "pin": "B7", "breathing": true }, + "rgblight": { + "saturation_steps": 8, + "brightness_steps": 8, + "led_count": 18, + "sleep": true + }, "ws2812": { "pin": "F7" }, diff --git a/keyboards/kmac/config.h b/keyboards/kmac/config.h index bc647193ca..dd12560fb6 100644 --- a/keyboards/kmac/config.h +++ b/keyboards/kmac/config.h @@ -32,9 +32,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #define MATRIX_COL_PINS \ { B6, C6, C7, F1, F0, B5, NO_PIN, NO_PIN, NO_PIN, NO_PIN, NO_PIN, NO_PIN, NO_PIN, NO_PIN, NO_PIN, NO_PIN, NO_PIN } -/* COL2ROW, ROW2COL*/ -//#define DIODE_DIRECTION - /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ #define LOCKING_SUPPORT_ENABLE /* Locking resynchronize hack */ diff --git a/keyboards/kmac_pad/config.h b/keyboards/kmac_pad/config.h index aaffc6c987..ee27565dce 100644 --- a/keyboards/kmac_pad/config.h +++ b/keyboards/kmac_pad/config.h @@ -30,9 +30,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #define MATRIX_ROW_PINS { E2, D0, D1, D2, D3, D5 } #define MATRIX_COL_PINS { C7, C6, B6, B5 } -/* COL2ROW, ROW2COL*/ -// #define DIODE_DIRECTION COL2ROW - /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ #define LOCKING_SUPPORT_ENABLE /* Locking resynchronize hack */ diff --git a/keyboards/kmini/config.h b/keyboards/kmini/config.h index 3c92c89423..c06925781f 100755 --- a/keyboards/kmini/config.h +++ b/keyboards/kmini/config.h @@ -28,6 +28,3 @@ */ #define MATRIX_ROW_PINS { D0, D1, D2, D3, D5 } #define MATRIX_COL_PINS { } - -/* COL2ROW, ROW2COL*/ -//#define DIODE_DIRECTION diff --git a/keyboards/kmini/keymaps/default/keymap.c b/keyboards/kmini/keymaps/default/keymap.c index c3a7b12a40..1f041daffc 100755 --- a/keyboards/kmini/keymaps/default/keymap.c +++ b/keyboards/kmini/keymaps/default/keymap.c @@ -39,10 +39,11 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { ), }; -void led_set_user(uint8_t usb_led) { - if (usb_led & (1<<USB_LED_CAPS_LOCK)) { +bool led_update_user(led_t led_state) { + if (led_state.caps_lock) { writePinLow(B1); } else { writePinHigh(B1); } + return false; } diff --git a/keyboards/knops/mini/keymaps/default-gsm-newbs/keymap.c b/keyboards/knops/mini/keymaps/default-gsm-newbs/keymap.c index 4921564529..5a629f57ff 100644 --- a/keyboards/knops/mini/keymaps/default-gsm-newbs/keymap.c +++ b/keyboards/knops/mini/keymaps/default-gsm-newbs/keymap.c @@ -273,44 +273,6 @@ void matrix_init_user(void) { set_layer_led(0); } -void matrix_scan_user(void) { -} - -void led_set_user(uint8_t usb_led) { - - if (usb_led & (1 << USB_LED_NUM_LOCK)) { - - } else { - - } - - if (usb_led & (1 << USB_LED_CAPS_LOCK)) { - - } else { - - } - - if (usb_led & (1 << USB_LED_SCROLL_LOCK)) { - - } else { - - } - - if (usb_led & (1 << USB_LED_COMPOSE)) { - - } else { - - } - - if (usb_led & (1 << USB_LED_KANA)) { - - } else { - - } - -} - - /* * NOTE: * diff --git a/keyboards/kona_classic/config.h b/keyboards/kona_classic/config.h index dd6631f545..03c8bceba0 100644 --- a/keyboards/kona_classic/config.h +++ b/keyboards/kona_classic/config.h @@ -29,10 +29,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #define RGBLIGHT_EFFECT_RGB_TEST #define RGBLIGHT_EFFECT_ALTERNATING #define RGBLIGHT_EFFECT_TWINKLE -#define RGBLED_NUM 30 // Number of LEDs -#define RGBLIGHT_HUE_STEP 5 -#define RGBLIGHT_SAT_STEP 10 -#define RGBLIGHT_VAL_STEP 10 /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ #define LOCKING_SUPPORT_ENABLE diff --git a/keyboards/kona_classic/info.json b/keyboards/kona_classic/info.json index bc79963cb1..35a8d788c2 100644 --- a/keyboards/kona_classic/info.json +++ b/keyboards/kona_classic/info.json @@ -8,6 +8,12 @@ "pid": "0x6060", "device_version": "0.0.3" }, + "rgblight": { + "hue_steps": 5, + "saturation_steps": 10, + "brightness_steps": 10, + "led_count": 30 + }, "ws2812": { "pin": "B2" }, diff --git a/keyboards/kopibeng/mnk65_stm32/rules.mk b/keyboards/kopibeng/mnk65_stm32/rules.mk index fddc8cdf73..f2400ced17 100644 --- a/keyboards/kopibeng/mnk65_stm32/rules.mk +++ b/keyboards/kopibeng/mnk65_stm32/rules.mk @@ -15,5 +15,3 @@ RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow AUDIO_ENABLE = no # Audio output ENCODER_ENABLE = no # Enable Encoder -# Enter lower-power sleep mode when on the ChibiOS idle thread -OPT_DEFS += -DCORTEX_ENABLE_WFI_IDLE=TRUE diff --git a/keyboards/kopibeng/mnk88/config.h b/keyboards/kopibeng/mnk88/config.h index 449d460607..8de0e59b59 100644 --- a/keyboards/kopibeng/mnk88/config.h +++ b/keyboards/kopibeng/mnk88/config.h @@ -16,11 +16,6 @@ #pragma once - #define RGBLED_NUM 20 - #define RGBLIGHT_HUE_STEP 8 - #define RGBLIGHT_SAT_STEP 8 - #define RGBLIGHT_VAL_STEP 8 - #define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */ #define RGBLIGHT_EFFECT_BREATHING #define RGBLIGHT_EFFECT_RAINBOW_MOOD #define RGBLIGHT_EFFECT_RAINBOW_SWIRL diff --git a/keyboards/kopibeng/mnk88/info.json b/keyboards/kopibeng/mnk88/info.json index 08baf2310b..3c3987ee7e 100644 --- a/keyboards/kopibeng/mnk88/info.json +++ b/keyboards/kopibeng/mnk88/info.json @@ -12,7 +12,11 @@ "pin": "A10" }, "rgblight": { - "max_brightness": 200 + "saturation_steps": 8, + "brightness_steps": 8, + "led_count": 20, + "max_brightness": 200, + "sleep": true }, "matrix_pins": { "cols": ["A2", "A1", "A0", "B11", "B10", "B2", "F1", "B1", "B0", "A7", "A6", "A5", "F0", "A4", "C15", "C14", "C13"], diff --git a/keyboards/kopibeng/mnk88/rules.mk b/keyboards/kopibeng/mnk88/rules.mk index cc3bf2abed..65bc2097f5 100644 --- a/keyboards/kopibeng/mnk88/rules.mk +++ b/keyboards/kopibeng/mnk88/rules.mk @@ -12,5 +12,3 @@ RGBLIGHT_ENABLE = yes # Enable keyboard RGB underglow AUDIO_ENABLE = no # Audio output ENCODER_ENABLE = no # Enable Encoder -# Enter lower-power sleep mode when on the ChibiOS idle thread -OPT_DEFS += -DCORTEX_ENABLE_WFI_IDLE=TRUE diff --git a/keyboards/kopibeng/xt60/config.h b/keyboards/kopibeng/xt60/config.h index 7a903e4eff..b39773594b 100644 --- a/keyboards/kopibeng/xt60/config.h +++ b/keyboards/kopibeng/xt60/config.h @@ -16,11 +16,6 @@ #pragma once - #define RGBLED_NUM 14 - #define RGBLIGHT_HUE_STEP 8 - #define RGBLIGHT_SAT_STEP 8 - #define RGBLIGHT_VAL_STEP 8 - #define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */ #define RGBLIGHT_EFFECT_BREATHING #define RGBLIGHT_EFFECT_RAINBOW_MOOD #define RGBLIGHT_EFFECT_RAINBOW_SWIRL diff --git a/keyboards/kopibeng/xt60/info.json b/keyboards/kopibeng/xt60/info.json index ca278dff70..4fe6642979 100644 --- a/keyboards/kopibeng/xt60/info.json +++ b/keyboards/kopibeng/xt60/info.json @@ -8,6 +8,12 @@ "pid": "0x0600", "device_version": "0.0.2" }, + "rgblight": { + "saturation_steps": 8, + "brightness_steps": 8, + "led_count": 14, + "sleep": true + }, "ws2812": { "pin": "F6" }, diff --git a/keyboards/kopibeng/xt60_singa/config.h b/keyboards/kopibeng/xt60_singa/config.h index 7a903e4eff..b39773594b 100644 --- a/keyboards/kopibeng/xt60_singa/config.h +++ b/keyboards/kopibeng/xt60_singa/config.h @@ -16,11 +16,6 @@ #pragma once - #define RGBLED_NUM 14 - #define RGBLIGHT_HUE_STEP 8 - #define RGBLIGHT_SAT_STEP 8 - #define RGBLIGHT_VAL_STEP 8 - #define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */ #define RGBLIGHT_EFFECT_BREATHING #define RGBLIGHT_EFFECT_RAINBOW_MOOD #define RGBLIGHT_EFFECT_RAINBOW_SWIRL diff --git a/keyboards/kopibeng/xt60_singa/info.json b/keyboards/kopibeng/xt60_singa/info.json index a4ed217828..eabff0309b 100644 --- a/keyboards/kopibeng/xt60_singa/info.json +++ b/keyboards/kopibeng/xt60_singa/info.json @@ -8,6 +8,12 @@ "pid": "0x0601", "device_version": "0.0.1" }, + "rgblight": { + "saturation_steps": 8, + "brightness_steps": 8, + "led_count": 14, + "sleep": true + }, "ws2812": { "pin": "F6" }, diff --git a/keyboards/kopibeng/xt65/config.h b/keyboards/kopibeng/xt65/config.h index b64511a63f..a6950c8238 100644 --- a/keyboards/kopibeng/xt65/config.h +++ b/keyboards/kopibeng/xt65/config.h @@ -16,11 +16,6 @@ #pragma once - #define RGBLED_NUM 12 - #define RGBLIGHT_HUE_STEP 8 - #define RGBLIGHT_SAT_STEP 8 - #define RGBLIGHT_VAL_STEP 8 - #define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */ #define RGBLIGHT_EFFECT_BREATHING #define RGBLIGHT_EFFECT_RAINBOW_MOOD #define RGBLIGHT_EFFECT_RAINBOW_SWIRL diff --git a/keyboards/kopibeng/xt65/info.json b/keyboards/kopibeng/xt65/info.json index 0a909a1cd3..650e0e05b2 100644 --- a/keyboards/kopibeng/xt65/info.json +++ b/keyboards/kopibeng/xt65/info.json @@ -21,7 +21,11 @@ "pin": "D5" }, "rgblight": { - "max_brightness": 200 + "saturation_steps": 8, + "brightness_steps": 8, + "led_count": 12, + "max_brightness": 200, + "sleep": true }, "processor": "atmega32u4", "bootloader": "atmel-dfu", diff --git a/keyboards/kopibeng/xt8x/config.h b/keyboards/kopibeng/xt8x/config.h index f385599d80..38b9f61911 100644 --- a/keyboards/kopibeng/xt8x/config.h +++ b/keyboards/kopibeng/xt8x/config.h @@ -18,11 +18,6 @@ #define INDICATOR_PIN_0 B13 - #define RGBLED_NUM 19 - #define RGBLIGHT_HUE_STEP 8 - #define RGBLIGHT_SAT_STEP 8 - #define RGBLIGHT_VAL_STEP 8 - #define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */ #define RGBLIGHT_EFFECT_BREATHING #define RGBLIGHT_EFFECT_RAINBOW_MOOD #define RGBLIGHT_EFFECT_RAINBOW_SWIRL diff --git a/keyboards/kopibeng/xt8x/info.json b/keyboards/kopibeng/xt8x/info.json index 1596ed883e..5d56a221cc 100644 --- a/keyboards/kopibeng/xt8x/info.json +++ b/keyboards/kopibeng/xt8x/info.json @@ -21,7 +21,11 @@ "pin": "A10" }, "rgblight": { - "max_brightness": 200 + "saturation_steps": 8, + "brightness_steps": 8, + "led_count": 19, + "max_brightness": 200, + "sleep": true }, "processor": "STM32F072", "bootloader": "stm32-dfu", diff --git a/keyboards/kopibeng/xt8x/rules.mk b/keyboards/kopibeng/xt8x/rules.mk index cc3bf2abed..65bc2097f5 100644 --- a/keyboards/kopibeng/xt8x/rules.mk +++ b/keyboards/kopibeng/xt8x/rules.mk @@ -12,5 +12,3 @@ RGBLIGHT_ENABLE = yes # Enable keyboard RGB underglow AUDIO_ENABLE = no # Audio output ENCODER_ENABLE = no # Enable Encoder -# Enter lower-power sleep mode when on the ChibiOS idle thread -OPT_DEFS += -DCORTEX_ENABLE_WFI_IDLE=TRUE diff --git a/keyboards/kprepublic/bm16s/config.h b/keyboards/kprepublic/bm16s/config.h index fb73fedb04..d702489ee7 100755 --- a/keyboards/kprepublic/bm16s/config.h +++ b/keyboards/kprepublic/bm16s/config.h @@ -16,7 +16,3 @@ #define RGBLIGHT_EFFECT_RGB_TEST #define RGBLIGHT_EFFECT_ALTERNATING #define RGBLIGHT_EFFECT_TWINKLE - #define RGBLED_NUM 16 - #define RGBLIGHT_HUE_STEP 8 - #define RGBLIGHT_SAT_STEP 8 - #define RGBLIGHT_VAL_STEP 8 diff --git a/keyboards/kprepublic/bm16s/info.json b/keyboards/kprepublic/bm16s/info.json index 262ce39fba..bc5df521a7 100644 --- a/keyboards/kprepublic/bm16s/info.json +++ b/keyboards/kprepublic/bm16s/info.json @@ -8,6 +8,11 @@ "pid": "0x016B", "device_version": "0.0.1" }, + "rgblight": { + "saturation_steps": 8, + "brightness_steps": 8, + "led_count": 16 + }, "ws2812": { "pin": "E2" }, diff --git a/keyboards/kprepublic/bm40hsrgb/keymaps/signynt/keymap.c b/keyboards/kprepublic/bm40hsrgb/keymaps/signynt/keymap.c index 5a1d366f56..eb20a1a25b 100644 --- a/keyboards/kprepublic/bm40hsrgb/keymaps/signynt/keymap.c +++ b/keyboards/kprepublic/bm40hsrgb/keymaps/signynt/keymap.c @@ -165,7 +165,7 @@ if(IS_LAYER_ON(NSSL)) { //capslock leds -if (host_keyboard_leds() & (1<<USB_LED_CAPS_LOCK)) { +if (host_keyboard_led_state().caps_lock) { rgb_matrix_set_color_all(50, 15.6, 0); } diff --git a/keyboards/kprepublic/bm43a/config.h b/keyboards/kprepublic/bm43a/config.h index c3303237f7..aff98236a5 100644 --- a/keyboards/kprepublic/bm43a/config.h +++ b/keyboards/kprepublic/bm43a/config.h @@ -17,11 +17,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #pragma once - #define RGBLED_NUM 10 - #define RGBLIGHT_HUE_STEP 8 - #define RGBLIGHT_SAT_STEP 8 - #define RGBLIGHT_VAL_STEP 8 - #define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */ #ifdef RGB_MATRIX_ENABLE # define RGB_MATRIX_MAXIMUM_BRIGHTNESS 180 // Limit to vendor-recommended value #endif diff --git a/keyboards/kprepublic/bm43a/info.json b/keyboards/kprepublic/bm43a/info.json index 8cd3487567..041da2164d 100644 --- a/keyboards/kprepublic/bm43a/info.json +++ b/keyboards/kprepublic/bm43a/info.json @@ -21,7 +21,11 @@ "pin": "E2" }, "rgblight": { - "max_brightness": 180 + "saturation_steps": 8, + "brightness_steps": 8, + "led_count": 10, + "max_brightness": 180, + "sleep": true }, "processor": "atmega32u4", "bootloader": "atmel-dfu", diff --git a/keyboards/kprepublic/bm43hsrgb/config.h b/keyboards/kprepublic/bm43hsrgb/config.h index fb800abc06..8fb37ac348 100755 --- a/keyboards/kprepublic/bm43hsrgb/config.h +++ b/keyboards/kprepublic/bm43hsrgb/config.h @@ -17,12 +17,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #pragma once - #define RGBLED_NUM 53 - #define RGBLIGHT_HUE_STEP 8 - #define RGBLIGHT_SAT_STEP 8 - #define RGBLIGHT_VAL_STEP 8 - #define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */ - #define RGBLIGHT_EFFECT_BREATHING #define RGBLIGHT_EFFECT_RAINBOW_MOOD #define RGBLIGHT_EFFECT_RAINBOW_SWIRL diff --git a/keyboards/kprepublic/bm43hsrgb/info.json b/keyboards/kprepublic/bm43hsrgb/info.json index 1cdaa64602..3151d9c8cc 100755 --- a/keyboards/kprepublic/bm43hsrgb/info.json +++ b/keyboards/kprepublic/bm43hsrgb/info.json @@ -12,7 +12,11 @@ "pin": "E2" }, "rgblight": { - "max_brightness": 180 + "saturation_steps": 8, + "brightness_steps": 8, + "led_count": 53, + "max_brightness": 180, + "sleep": true }, "matrix_pins": { "cols": ["C6", "D2", "D1", "D0", "D7", "D6", "D4", "D5", "D3", "B7", "B3", "B2"], diff --git a/keyboards/kprepublic/bm60hsrgb/rev1/config.h b/keyboards/kprepublic/bm60hsrgb/rev1/config.h index eebd3381d5..6a3bee5a52 100644 --- a/keyboards/kprepublic/bm60hsrgb/rev1/config.h +++ b/keyboards/kprepublic/bm60hsrgb/rev1/config.h @@ -18,7 +18,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #pragma once #define RGB_MATRIX_LED_COUNT 69 -# define RGBLED_NUM 69 # define RGB_MATRIX_KEYPRESSES #ifdef RGB_MATRIX_ENABLE # define RGB_MATRIX_MAXIMUM_BRIGHTNESS 180 // Limit to vendor-recommended value diff --git a/keyboards/kprepublic/bm60hsrgb/rev2/config.h b/keyboards/kprepublic/bm60hsrgb/rev2/config.h index c2aafb9adc..c504b5f14f 100644 --- a/keyboards/kprepublic/bm60hsrgb/rev2/config.h +++ b/keyboards/kprepublic/bm60hsrgb/rev2/config.h @@ -16,7 +16,6 @@ #pragma once //rgb light setting -#define RGBLED_NUM 6 #define RGBLIGHT_EFFECT_BREATHING #define RGBLIGHT_EFFECT_RAINBOW_MOOD #define RGBLIGHT_EFFECT_RAINBOW_SWIRL @@ -28,9 +27,6 @@ #define RGBLIGHT_EFFECT_ALTERNATING #define RGBLIGHT_EFFECT_TWINKLE #define RGBLIGHT_DEFAULT_MODE RGBLIGHT_MODE_RAINBOW_MOOD -#define RGBLIGHT_HUE_STEP 8 -#define RGBLIGHT_SAT_STEP 8 -#define RGBLIGHT_VAL_STEP 8 #define RGB_DISABLE_WHEN_USB_SUSPENDED true // turn off effects when suspended #define DRIVER_ADDR_1 0b1010000 diff --git a/keyboards/kprepublic/bm60hsrgb/rev2/info.json b/keyboards/kprepublic/bm60hsrgb/rev2/info.json index bb6533b823..51712acf7e 100644 --- a/keyboards/kprepublic/bm60hsrgb/rev2/info.json +++ b/keyboards/kprepublic/bm60hsrgb/rev2/info.json @@ -15,6 +15,9 @@ "driver": "custom" }, "rgblight": { + "saturation_steps": 8, + "brightness_steps": 8, + "led_count": 6, "max_brightness": 150 }, "matrix_pins": { diff --git a/keyboards/kprepublic/bm60hsrgb_ec/rev1/config.h b/keyboards/kprepublic/bm60hsrgb_ec/rev1/config.h index a11d579239..2f02594e15 100644 --- a/keyboards/kprepublic/bm60hsrgb_ec/rev1/config.h +++ b/keyboards/kprepublic/bm60hsrgb_ec/rev1/config.h @@ -17,7 +17,6 @@ #pragma once #define RGB_MATRIX_LED_COUNT 69 - #define RGBLED_NUM 69 #define RGB_MATRIX_KEYPRESSES #define RGB_MATRIX_MAXIMUM_BRIGHTNESS 140 #define RGB_MATRIX_KEYPRESSES diff --git a/keyboards/kprepublic/bm60hsrgb_ec/rev2/config.h b/keyboards/kprepublic/bm60hsrgb_ec/rev2/config.h index 1cc17d6c86..8e51b83264 100644 --- a/keyboards/kprepublic/bm60hsrgb_ec/rev2/config.h +++ b/keyboards/kprepublic/bm60hsrgb_ec/rev2/config.h @@ -16,7 +16,6 @@ #pragma once //rgb light setting -#define RGBLED_NUM 6 #define RGBLIGHT_EFFECT_BREATHING #define RGBLIGHT_EFFECT_RAINBOW_MOOD #define RGBLIGHT_EFFECT_RAINBOW_SWIRL @@ -28,9 +27,6 @@ #define RGBLIGHT_EFFECT_ALTERNATING #define RGBLIGHT_EFFECT_TWINKLE #define RGBLIGHT_DEFAULT_MODE RGBLIGHT_MODE_RAINBOW_MOOD -#define RGBLIGHT_HUE_STEP 8 -#define RGBLIGHT_SAT_STEP 8 -#define RGBLIGHT_VAL_STEP 8 # define RGB_DISABLE_WHEN_USB_SUSPENDED true // turn off effects when suspended # define DRIVER_ADDR_1 0b1010000 diff --git a/keyboards/kprepublic/bm60hsrgb_ec/rev2/info.json b/keyboards/kprepublic/bm60hsrgb_ec/rev2/info.json index d91f6a8531..0b0b5c749d 100644 --- a/keyboards/kprepublic/bm60hsrgb_ec/rev2/info.json +++ b/keyboards/kprepublic/bm60hsrgb_ec/rev2/info.json @@ -15,6 +15,9 @@ "driver": "IS31FL3733" }, "rgblight": { + "saturation_steps": 8, + "brightness_steps": 8, + "led_count": 6, "max_brightness": 150 }, "matrix_pins": { diff --git a/keyboards/kprepublic/bm60hsrgb_iso/rev1/config.h b/keyboards/kprepublic/bm60hsrgb_iso/rev1/config.h index d4ba498987..563ac242c8 100644 --- a/keyboards/kprepublic/bm60hsrgb_iso/rev1/config.h +++ b/keyboards/kprepublic/bm60hsrgb_iso/rev1/config.h @@ -18,12 +18,7 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #pragma once #define RGB_MATRIX_LED_COUNT 70 -# define RGBLED_NUM 70 # define RGB_MATRIX_KEYPRESSES - // #define RGBLIGHT_HUE_STEP 8 - // #define RGBLIGHT_SAT_STEP 8 - // #define RGBLIGHT_VAL_STEP 8 - // #define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */ #ifdef RGB_MATRIX_ENABLE # define RGB_MATRIX_MAXIMUM_BRIGHTNESS 180 // Limit to vendor-recommended value // RGB Matrix Animation modes. Explicitly enabled diff --git a/keyboards/kprepublic/bm60hsrgb_iso/rev1/info.json b/keyboards/kprepublic/bm60hsrgb_iso/rev1/info.json index 6e9256523f..800ff0de31 100644 --- a/keyboards/kprepublic/bm60hsrgb_iso/rev1/info.json +++ b/keyboards/kprepublic/bm60hsrgb_iso/rev1/info.json @@ -14,9 +14,6 @@ "rgb_matrix": { "driver": "WS2812" }, - "rgblight": { - "max_brightness": 180 - }, "matrix_pins": { "cols": ["D0", "D1", "D2", "D3", "D5", "D4", "D6", "D7", "B4", "B5", "B6", "C6", "C7", "F7"], "rows": ["B0", "B1", "B2", "B3", "E6"] diff --git a/keyboards/kprepublic/bm60hsrgb_iso/rev2/config.h b/keyboards/kprepublic/bm60hsrgb_iso/rev2/config.h index 7af983c5e7..59d12994fd 100644 --- a/keyboards/kprepublic/bm60hsrgb_iso/rev2/config.h +++ b/keyboards/kprepublic/bm60hsrgb_iso/rev2/config.h @@ -18,7 +18,6 @@ #pragma once //rgb light setting -#define RGBLED_NUM 6 #define RGBLIGHT_EFFECT_BREATHING #define RGBLIGHT_EFFECT_RAINBOW_MOOD #define RGBLIGHT_EFFECT_RAINBOW_SWIRL @@ -30,9 +29,6 @@ #define RGBLIGHT_EFFECT_ALTERNATING #define RGBLIGHT_EFFECT_TWINKLE #define RGBLIGHT_DEFAULT_MODE RGBLIGHT_MODE_RAINBOW_MOOD -#define RGBLIGHT_HUE_STEP 8 -#define RGBLIGHT_SAT_STEP 8 -#define RGBLIGHT_VAL_STEP 8 # define RGB_DISABLE_WHEN_USB_SUSPENDED true // turn off effects when suspended # define RGB_MATRIX_KEYPRESSES @@ -106,7 +102,7 @@ #ifdef RGBLIGHT_ENABLE # define WS2812_LED_TOTAL 0 #else -# define WS2812_LED_TOTAL RGBLED_NUM +# define WS2812_LED_TOTAL 6 #endif #define RGB_MATRIX_LED_COUNT (ISSI_LED_TOTAL + WS2812_LED_TOTAL) diff --git a/keyboards/kprepublic/bm60hsrgb_iso/rev2/info.json b/keyboards/kprepublic/bm60hsrgb_iso/rev2/info.json index 6326d871df..252ff6773f 100644 --- a/keyboards/kprepublic/bm60hsrgb_iso/rev2/info.json +++ b/keyboards/kprepublic/bm60hsrgb_iso/rev2/info.json @@ -15,6 +15,9 @@ "driver": "custom" }, "rgblight": { + "saturation_steps": 8, + "brightness_steps": 8, + "led_count": 6, "max_brightness": 150 }, "matrix_pins": { diff --git a/keyboards/kprepublic/bm60hsrgb_poker/rev1/config.h b/keyboards/kprepublic/bm60hsrgb_poker/rev1/config.h index aac03cec4d..3213511072 100644 --- a/keyboards/kprepublic/bm60hsrgb_poker/rev1/config.h +++ b/keyboards/kprepublic/bm60hsrgb_poker/rev1/config.h @@ -18,12 +18,7 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #pragma once #define RGB_MATRIX_LED_COUNT 67 - #define RGBLED_NUM 67 #define RGB_MATRIX_KEYPRESSES - #define RGBLIGHT_HUE_STEP 8 - #define RGBLIGHT_SAT_STEP 8 - #define RGBLIGHT_VAL_STEP 8 - #define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */ #define RGBLIGHT_EFFECT_BREATHING #define RGBLIGHT_EFFECT_RAINBOW_MOOD #define RGBLIGHT_EFFECT_RAINBOW_SWIRL diff --git a/keyboards/kprepublic/bm60hsrgb_poker/rev1/info.json b/keyboards/kprepublic/bm60hsrgb_poker/rev1/info.json index 5746594468..c323a31dea 100644 --- a/keyboards/kprepublic/bm60hsrgb_poker/rev1/info.json +++ b/keyboards/kprepublic/bm60hsrgb_poker/rev1/info.json @@ -15,7 +15,11 @@ "driver": "WS2812" }, "rgblight": { - "max_brightness": 180 + "saturation_steps": 8, + "brightness_steps": 8, + "led_count": 67, + "max_brightness": 180, + "sleep": true }, "matrix_pins": { "cols": ["D0", "D1", "D2", "D3", "D5", "D4", "D6", "D7", "B4", "B5", "B6", "C6", "C7", "F7"], diff --git a/keyboards/kprepublic/bm60hsrgb_poker/rev2/config.h b/keyboards/kprepublic/bm60hsrgb_poker/rev2/config.h index 2feead3386..76791a2002 100644 --- a/keyboards/kprepublic/bm60hsrgb_poker/rev2/config.h +++ b/keyboards/kprepublic/bm60hsrgb_poker/rev2/config.h @@ -16,7 +16,6 @@ #pragma once //rgb light setting -#define RGBLED_NUM 6 #define RGBLIGHT_EFFECT_BREATHING #define RGBLIGHT_EFFECT_RAINBOW_MOOD #define RGBLIGHT_EFFECT_RAINBOW_SWIRL @@ -27,9 +26,6 @@ #define RGBLIGHT_EFFECT_RGB_TEST #define RGBLIGHT_EFFECT_ALTERNATING #define RGBLIGHT_DEFAULT_MODE RGBLIGHT_MODE_RAINBOW_MOOD -#define RGBLIGHT_HUE_STEP 8 -#define RGBLIGHT_SAT_STEP 8 -#define RGBLIGHT_VAL_STEP 8 # define RGB_DISABLE_WHEN_USB_SUSPENDED true // turn off effects when suspended # define RGB_MATRIX_KEYPRESSES @@ -102,7 +98,7 @@ #ifdef RGBLIGHT_ENABLE # define WS2812_LED_TOTAL 0 #else -# define WS2812_LED_TOTAL RGBLED_NUM +# define WS2812_LED_TOTAL 6 #endif #define RGB_MATRIX_LED_COUNT (ISSI_LED_TOTAL + WS2812_LED_TOTAL) diff --git a/keyboards/kprepublic/bm60hsrgb_poker/rev2/info.json b/keyboards/kprepublic/bm60hsrgb_poker/rev2/info.json index 01d09b5946..50a851180d 100644 --- a/keyboards/kprepublic/bm60hsrgb_poker/rev2/info.json +++ b/keyboards/kprepublic/bm60hsrgb_poker/rev2/info.json @@ -15,6 +15,9 @@ "driver": "custom" }, "rgblight": { + "saturation_steps": 8, + "brightness_steps": 8, + "led_count": 6, "max_brightness": 150 }, "matrix_pins": { diff --git a/keyboards/kprepublic/bm65hsrgb/rev1/config.h b/keyboards/kprepublic/bm65hsrgb/rev1/config.h index e2522723fc..ef410e9441 100644 --- a/keyboards/kprepublic/bm65hsrgb/rev1/config.h +++ b/keyboards/kprepublic/bm65hsrgb/rev1/config.h @@ -19,7 +19,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. // The number of LEDs connected #define RGB_MATRIX_LED_COUNT 73 - #define RGBLED_NUM 73 #define RGB_MATRIX_KEYPRESSES // reacts to keypresses /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ diff --git a/keyboards/kprepublic/bm65hsrgb_iso/rev1/config.h b/keyboards/kprepublic/bm65hsrgb_iso/rev1/config.h index 2814a6609a..639eb5012b 100644 --- a/keyboards/kprepublic/bm65hsrgb_iso/rev1/config.h +++ b/keyboards/kprepublic/bm65hsrgb_iso/rev1/config.h @@ -18,11 +18,7 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #pragma once #define RGB_MATRIX_LED_COUNT 74 - #define RGBLED_NUM 74 #define RGB_MATRIX_KEYPRESSES - #define RGBLIGHT_HUE_STEP 8 - #define RGBLIGHT_SAT_STEP 8 - #define RGBLIGHT_VAL_STEP 8 #define RGB_MATRIX_MAXIMUM_BRIGHTNESS 140 // RGB Matrix Animation modes. Explicitly enabled // For full list of effects, see: @@ -74,8 +70,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. # define ENABLE_RGB_MATRIX_SOLID_MULTISPLASH # define RGB_MATRIX_DEFAULT_MODE RGB_MATRIX_BAND_SAT -/* If defined, the RGB lighting will be switched off when the host goes to sleep */ -# define RGBLIGHT_SLEEP /*== all animations enable ==*/ # define RGBLIGHT_EFFECT_BREATHING # define RGBLIGHT_EFFECT_RAINBOW_MOOD diff --git a/keyboards/kprepublic/bm65hsrgb_iso/rev1/info.json b/keyboards/kprepublic/bm65hsrgb_iso/rev1/info.json index 8c3536db6b..c73c2cca8e 100644 --- a/keyboards/kprepublic/bm65hsrgb_iso/rev1/info.json +++ b/keyboards/kprepublic/bm65hsrgb_iso/rev1/info.json @@ -9,6 +9,12 @@ "device_version": "0.0.1", "force_nkro": true }, + "rgblight": { + "saturation_steps": 8, + "brightness_steps": 8, + "led_count": 74, + "sleep": true + }, "ws2812": { "pin": "E2" }, diff --git a/keyboards/kprepublic/bm68hsrgb/rev1/config.h b/keyboards/kprepublic/bm68hsrgb/rev1/config.h index cef5a0939b..a3ef1df3b3 100644 --- a/keyboards/kprepublic/bm68hsrgb/rev1/config.h +++ b/keyboards/kprepublic/bm68hsrgb/rev1/config.h @@ -19,7 +19,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. // The number of LEDs connected #define RGB_MATRIX_LED_COUNT 74 -# define RGBLED_NUM 74 # define RGB_MATRIX_KEYPRESSES // reacts to keypresses #ifdef RGB_MATRIX_ENABLE # define RGB_MATRIX_MAXIMUM_BRIGHTNESS 180 // Limit to vendor-recommended value diff --git a/keyboards/kprepublic/bm68hsrgb/rev1/info.json b/keyboards/kprepublic/bm68hsrgb/rev1/info.json index b3747af5b1..a965121f64 100644 --- a/keyboards/kprepublic/bm68hsrgb/rev1/info.json +++ b/keyboards/kprepublic/bm68hsrgb/rev1/info.json @@ -14,9 +14,6 @@ "rgb_matrix": { "driver": "WS2812" }, - "rgblight": { - "max_brightness": 180 - }, "matrix_pins": { "cols": ["D0", "D1", "D2", "D3", "D5", "D4", "D6", "D7", "B4", "B5", "B6", "C6", "C7", "F7", "F6"], "rows": ["B0", "B1", "B2", "B3", "E6"] diff --git a/keyboards/kprepublic/bm68hsrgb/rev2/config.h b/keyboards/kprepublic/bm68hsrgb/rev2/config.h index 53aabdaf94..ed054cd92d 100644 --- a/keyboards/kprepublic/bm68hsrgb/rev2/config.h +++ b/keyboards/kprepublic/bm68hsrgb/rev2/config.h @@ -16,9 +16,6 @@ */ #pragma once -#define USB_POLLING_INTERVAL_MS 1 - -#define RGBLED_NUM 6 #define RGBLIGHT_EFFECT_BREATHING #define RGBLIGHT_EFFECT_RAINBOW_MOOD #define RGBLIGHT_EFFECT_RAINBOW_SWIRL @@ -30,11 +27,6 @@ #define RGBLIGHT_EFFECT_ALTERNATING #define RGBLIGHT_EFFECT_TWINKLE #define RGBLIGHT_DEFAULT_MODE RGBLIGHT_MODE_RAINBOW_MOOD -#define RGBLIGHT_HUE_STEP 8 -#define RGBLIGHT_SAT_STEP 8 -#define RGBLIGHT_VAL_STEP 8 - - #define DRIVER_ADDR_1 0b0110000 diff --git a/keyboards/kprepublic/bm68hsrgb/rev2/info.json b/keyboards/kprepublic/bm68hsrgb/rev2/info.json index b7c827e0ea..7df0c1e4e3 100644 --- a/keyboards/kprepublic/bm68hsrgb/rev2/info.json +++ b/keyboards/kprepublic/bm68hsrgb/rev2/info.json @@ -15,6 +15,9 @@ "driver": "IS31FL3741" }, "rgblight": { + "saturation_steps": 8, + "brightness_steps": 8, + "led_count": 6, "max_brightness": 150 }, "matrix_pins": { diff --git a/keyboards/kprepublic/bm80hsrgb/config.h b/keyboards/kprepublic/bm80hsrgb/config.h index a9ba033fb0..c55999846e 100644 --- a/keyboards/kprepublic/bm80hsrgb/config.h +++ b/keyboards/kprepublic/bm80hsrgb/config.h @@ -20,11 +20,9 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. // The number of LEDs connected #define RGB_MATRIX_LED_COUNT 87 -#define RGBLED_NUM 87 #define RGB_MATRIX_KEYPRESSES // reacts to keypresses //#define RGB_MATRIX_KEYRELEASES // reacts to keyreleases (instead of keypresses) #define RGB_MATRIX_FRAMEBUFFER_EFFECTS -#define RGB_MATRIX_TIMEOUT 0 // number of milliseconds to wait until rgb automatically turns off //#define RGB_MATRIX_LED_PROCESS_LIMIT (RGB_MATRIX_LED_COUNT + 4) / 5 // limits the number of LEDs to process in an animation per task run (increases keyboard responsiveness) #define RGB_MATRIX_LED_FLUSH_LIMIT 16 // limits in milliseconds how frequently an animation will update the LEDs. 16 (16ms) is equivalent to limiting to 60fps (increases keyboard responsiveness) // #define RGB_MATRIX_MAXIMUM_BRIGHTNESS 200 // limits maximum brightness of LEDs to 200 out of 255. If not defined maximum brightness is set to 255 diff --git a/keyboards/kprepublic/bm980hsrgb/config.h b/keyboards/kprepublic/bm980hsrgb/config.h index 7ecc626803..73c222c113 100644 --- a/keyboards/kprepublic/bm980hsrgb/config.h +++ b/keyboards/kprepublic/bm980hsrgb/config.h @@ -19,7 +19,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. // The number of LEDs connected #define RGB_MATRIX_LED_COUNT 98 -# define RGBLED_NUM 98 #define RGB_MATRIX_KEYPRESSES // reacts to keypresses //#define RGB_MATRIX_KEYRELEASES // reacts to keyreleases (instead of keypresses) #define RGB_MATRIX_FRAMEBUFFER_EFFECTS diff --git a/keyboards/kprepublic/cospad/config.h b/keyboards/kprepublic/cospad/config.h index d9727b63c7..a59b1346c4 100644 --- a/keyboards/kprepublic/cospad/config.h +++ b/keyboards/kprepublic/cospad/config.h @@ -17,11 +17,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #pragma once - #define RGBLED_NUM 4 -// #define RGBLIGHT_HUE_STEP 8 -// #define RGBLIGHT_SAT_STEP 8 -// #define RGBLIGHT_VAL_STEP 8 -#define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */ #define RGBLIGHT_EFFECT_BREATHING #define RGBLIGHT_EFFECT_RAINBOW_MOOD #define RGBLIGHT_EFFECT_RAINBOW_SWIRL diff --git a/keyboards/kprepublic/cospad/info.json b/keyboards/kprepublic/cospad/info.json index 1814b50464..90b9dab4a1 100644 --- a/keyboards/kprepublic/cospad/info.json +++ b/keyboards/kprepublic/cospad/info.json @@ -17,6 +17,10 @@ "pin": "F7", "on_state": 0 }, + "rgblight": { + "led_count": 4, + "sleep": true + }, "ws2812": { "pin": "F6" }, diff --git a/keyboards/kprepublic/jj40/config.h b/keyboards/kprepublic/jj40/config.h index d77984fc69..d9bc6bc9fb 100644 --- a/keyboards/kprepublic/jj40/config.h +++ b/keyboards/kprepublic/jj40/config.h @@ -15,8 +15,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #pragma once /* RGB underglow */ -// NOTE: for PS2AVRGB boards, underglow commands are sent via I2C to 0xB0. -#define RGBLED_NUM 5 #define RGBLIGHT_EFFECT_BREATHING #define RGBLIGHT_EFFECT_RAINBOW_MOOD #define RGBLIGHT_EFFECT_RAINBOW_SWIRL diff --git a/keyboards/kprepublic/jj40/info.json b/keyboards/kprepublic/jj40/info.json index 2627ffbff9..e42de6f271 100644 --- a/keyboards/kprepublic/jj40/info.json +++ b/keyboards/kprepublic/jj40/info.json @@ -19,6 +19,9 @@ "levels": 12, "breathing": true }, + "rgblight": { + "led_count": 5 + }, "ws2812": { "driver": "i2c" }, diff --git a/keyboards/kprepublic/jj40/keymaps/stevexyz/keymap.c b/keyboards/kprepublic/jj40/keymaps/stevexyz/keymap.c index 51691e8f1f..6c8220a702 100644 --- a/keyboards/kprepublic/jj40/keymaps/stevexyz/keymap.c +++ b/keyboards/kprepublic/jj40/keymaps/stevexyz/keymap.c @@ -262,14 +262,11 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { void matrix_init_user(void) { // eeconfig_init(); // reset keyboard to a standard default state; useful when new releases messup with eeprom values // set num lock on at start (for numonly layer to work) - if (!(host_keyboard_leds() & (1<<USB_LED_NUM_LOCK))) { + if (!host_keyboard_led_state().num_lock) { SEND_STRING(SS_TAP(X_NUM_LOCK)); //register_code(KC_NUM_LOCK); unregister_code(KC_NUM_LOCK); } } -void matrix_scan_user(void) { -} - bool process_record_user(uint16_t keycode, keyrecord_t *record) { switch (keycode) { case CK_TRIPLEZERO: diff --git a/keyboards/kprepublic/jj4x4/config.h b/keyboards/kprepublic/jj4x4/config.h index 5646d4c653..2e1fefef99 100644 --- a/keyboards/kprepublic/jj4x4/config.h +++ b/keyboards/kprepublic/jj4x4/config.h @@ -18,8 +18,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #pragma once /* RGB underglow */ -// NOTE: for PS2AVRGB boards, underglow commands are sent via I2C to 0xB0. -#define RGBLED_NUM 4 #define RGBLIGHT_EFFECT_BREATHING #define RGBLIGHT_EFFECT_RAINBOW_MOOD #define RGBLIGHT_EFFECT_RAINBOW_SWIRL diff --git a/keyboards/kprepublic/jj4x4/info.json b/keyboards/kprepublic/jj4x4/info.json index fce30c67b0..35a4de519f 100644 --- a/keyboards/kprepublic/jj4x4/info.json +++ b/keyboards/kprepublic/jj4x4/info.json @@ -19,6 +19,9 @@ "levels": 12, "breathing": true }, + "rgblight": { + "led_count": 4 + }, "ws2812": { "driver": "i2c" }, diff --git a/keyboards/kprepublic/jj50/config.h b/keyboards/kprepublic/jj50/config.h index 3220fd6477..574aae16d8 100644 --- a/keyboards/kprepublic/jj50/config.h +++ b/keyboards/kprepublic/jj50/config.h @@ -20,7 +20,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #pragma once -#define RGBLED_NUM 12 #define RGBLIGHT_EFFECT_BREATHING #define RGBLIGHT_EFFECT_RAINBOW_MOOD #define RGBLIGHT_EFFECT_RAINBOW_SWIRL @@ -31,6 +30,3 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #define RGBLIGHT_EFFECT_RGB_TEST #define RGBLIGHT_EFFECT_ALTERNATING #define RGBLIGHT_EFFECT_TWINKLE -#define RGBLIGHT_HUE_STEP 12 -#define RGBLIGHT_SAT_STEP 15 -#define RGBLIGHT_VAL_STEP 18 diff --git a/keyboards/kprepublic/jj50/info.json b/keyboards/kprepublic/jj50/info.json index a83d42ab6a..2b7b710938 100644 --- a/keyboards/kprepublic/jj50/info.json +++ b/keyboards/kprepublic/jj50/info.json @@ -18,6 +18,12 @@ "levels": 12, "breathing": true }, + "rgblight": { + "hue_steps": 12, + "saturation_steps": 15, + "brightness_steps": 18, + "led_count": 12 + }, "ws2812": { "driver": "i2c" }, diff --git a/keyboards/kprepublic/jj50/keymaps/abstractkb/keymap.c b/keyboards/kprepublic/jj50/keymaps/abstractkb/keymap.c index 21f8fcbb0f..f02f27005b 100644 --- a/keyboards/kprepublic/jj50/keymaps/abstractkb/keymap.c +++ b/keyboards/kprepublic/jj50/keymaps/abstractkb/keymap.c @@ -64,12 +64,13 @@ layer_state_t layer_state_set_user(layer_state_t state) { return state; } -void led_set_user(uint8_t usb_led) { - if (usb_led & (1<<USB_LED_CAPS_LOCK)) { +bool led_update_user(led_t led_state) { + if (led_state.caps_lock) { rgblight_mode_noeeprom(RGBLIGHT_MODE_ALTERNATING); } else { layer_state_set_user(layer_state); } + return false; } void myrgb_toggle(void) { diff --git a/keyboards/kprepublic/jj50/keymaps/abstractkb_gergomatch/keymap.c b/keyboards/kprepublic/jj50/keymaps/abstractkb_gergomatch/keymap.c index 5292d99b5a..888e43e7dd 100644 --- a/keyboards/kprepublic/jj50/keymaps/abstractkb_gergomatch/keymap.c +++ b/keyboards/kprepublic/jj50/keymaps/abstractkb_gergomatch/keymap.c @@ -64,12 +64,13 @@ layer_state_t layer_state_set_user(layer_state_t state) { return state; } -void led_set_user(uint8_t usb_led) { - if (usb_led & (1<<USB_LED_CAPS_LOCK)) { +bool led_update_user(led_t led_state) { + if (led_state.caps_lock) { rgblight_mode_noeeprom(RGBLIGHT_MODE_ALTERNATING); } else { layer_state_set_user(layer_state); } + return false; } void myrgb_toggle(void) { diff --git a/keyboards/ktec/daisy/config.h b/keyboards/ktec/daisy/config.h index 7928ebcd35..94ac667ad4 100644 --- a/keyboards/ktec/daisy/config.h +++ b/keyboards/ktec/daisy/config.h @@ -17,11 +17,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #pragma once -# define RGBLED_NUM 8 -# define RGBLIGHT_HUE_STEP 12 -# define RGBLIGHT_SAT_STEP 25 -# define RGBLIGHT_VAL_STEP 12 -// #define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */ # define RGBLIGHT_EFFECT_BREATHING # define RGBLIGHT_EFFECT_RAINBOW_MOOD # define RGBLIGHT_EFFECT_RAINBOW_SWIRL diff --git a/keyboards/ktec/daisy/info.json b/keyboards/ktec/daisy/info.json index ddd45dae05..aa9a45477a 100644 --- a/keyboards/ktec/daisy/info.json +++ b/keyboards/ktec/daisy/info.json @@ -21,6 +21,12 @@ "caps_lock": "C6", "on_state": 0 }, + "rgblight": { + "hue_steps": 12, + "saturation_steps": 25, + "brightness_steps": 12, + "led_count": 8 + }, "ws2812": { "pin": "C7" }, diff --git a/keyboards/ktec/ergodone/keymaps/vega/keymap.c b/keyboards/ktec/ergodone/keymaps/vega/keymap.c index 8e460d7b4c..d668f9b41e 100644 --- a/keyboards/ktec/ergodone/keymaps/vega/keymap.c +++ b/keyboards/ktec/ergodone/keymaps/vega/keymap.c @@ -686,112 +686,112 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { [MATH] = LAYOUT_ergodox( KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_GRV, - KC_TAB, X(Mc), X(Munion), X(arwl), X(or), X(exists), KC_BSLS, - X(arwr), X(root), X(and), X(imply), X(nexists), X(forall), - SC_LSPO, KC_SCLN, X(intgrl), X(Mn), X(Mz), X(member), X(arwl), + KC_TAB, UM(Mc), UM(Munion), UM(arwl), UM(or), UM(exists), KC_BSLS, + UM(arwr), UM(root), UM(and), UM(imply), UM(nexists), UM(forall), + SC_LSPO, KC_SCLN, UM(intgrl), UM(Mn), UM(Mz), UM(member), UM(arwl), KC_MS_L, TO(BASE), TO(BASE), KC_INS, KC_DEL, KC_LBRC, KC_HOME, KC_UP, KC_SPC, KC_LGUI, KC_DOWN, TT(FNLR), KC_6, KC_7, KC_8, KC_9, KC_0, KC_BSPC, - KC_PGUP, X(plsminus), X(infin), X(neleof), X(equiv), X(Mq), KC_EQL, - X(sum), X(emtyset), X(porp), X(suprsetof), X(not), X(neq), - KC_PGDN, X(subsetof), X(intersection), X(angl), X(nmember), X(eleof), SC_RSPC, + KC_PGUP, UM(plsminus), UM(infin), UM(neleof), UM(equiv), UM(Mq), KC_EQL, + UM(sum), UM(emtyset), UM(porp), UM(suprsetof), UM(not), UM(neq), + KC_PGDN, UM(subsetof), UM(intersection), UM(angl), UM(nmember), UM(eleof), SC_RSPC, KC_RCTL, KC_RALT, KC_APP, TO(BASE), TO(BASE), KC_END, KC_RBRC, KC_LEFT, KC_RGHT, KC_ENT, KC_SPC ), [SYMB] = LAYOUT_ergodox( - X(Os), X(Oa), X(Ob), X(Oc), X(Od), X(Oe), X(mdot), - X(boxemp), X(bbstr), X(bbrtr), X(bbrtl), X(bbstl), X(degree), X(brkdn), - X(boxchk), X(bbmbl), X(bbml), X(bbmr), X(bbmbr), X(neteen), - X(boxX), X(bbsbr), X(bbrbr), X(bbrbl), X(bbsbl), X(uxclm), X(brkup), - X(floppy), TO(BASE), TO(BASE), X(arwu), X(arwd), - X(fire), X(lshade), X(mshade), KC_SPC, X(OS), X(dshade), - - X(Ox), X(Of), X(Og), X(Oh), X(Oi), X(OA), X(OB), - X(numero), X(trade), X(copy), X(cleft), X(cent), X(OED), X(OC), - X(Agrave), X(gnd), X(sqr), X(sine), X(opt), X(OD), - X(sect), X(Aacute), X(Acircm), X(Adiaer), X(Abreve), X(Atilde), X(OE), - X(arwl), X(arwr), X(geq), X(leq), X(OF), - X(rang), X(water), X(perup), X(perdn), X(baster), KC_ENT + UM(Os), UM(Oa), UM(Ob), UM(Oc), UM(Od), UM(Oe), UM(mdot), + UM(boxemp), UM(bbstr), UM(bbrtr), UM(bbrtl), UM(bbstl), UM(degree), UM(brkdn), + UM(boxchk), UM(bbmbl), UM(bbml), UM(bbmr), UM(bbmbr), UM(neteen), + UM(boxX), UM(bbsbr), UM(bbrbr), UM(bbrbl), UM(bbsbl), UM(uxclm), UM(brkup), + UM(floppy), TO(BASE), TO(BASE), UM(arwu), UM(arwd), + UM(fire), UM(lshade), UM(mshade), KC_SPC, UM(OS), UM(dshade), + + UM(Ox), UM(Of), UM(Og), UM(Oh), UM(Oi), UM(OA), UM(OB), + UM(numero), UM(trade), UM(copy), UM(cleft), UM(cent), UM(OED), UM(OC), + UM(Agrave), UM(gnd), UM(sqr), UM(sine), UM(opt), UM(OD), + UM(sect), UM(Aacute), UM(Acircm), UM(Adiaer), UM(Abreve), UM(Atilde), UM(OE), + UM(arwl), UM(arwr), UM(geq), UM(leq), UM(OF), + UM(rang), UM(water), UM(perup), UM(perdn), UM(baster), KC_ENT ), [GREL] = LAYOUT_ergodox( - KC_ESC, X(Rone), X(Rtwo), X(Rthree), X(Rfour), X(Rfive), KC_GRV, - KC_TAB, KC_QUOT, KC_COMM, KC_DOT, X(gp), X(gy), KC_SLSH, - KC_SLSH, X(ga), X(go), X(ge), X(gu), X(gi), - MO(GREU), KC_SCLN, X(gq), X(gj), X(gk), X(gx), KC_AMPR, + KC_ESC, UM(Rone), UM(Rtwo), UM(Rthree), UM(Rfour), UM(Rfive), KC_GRV, + KC_TAB, KC_QUOT, KC_COMM, KC_DOT, UM(gp), UM(gy), KC_SLSH, + KC_SLSH, UM(ga), UM(go), UM(ge), UM(gu), UM(gi), + MO(GREU), KC_SCLN, UM(gq), UM(gj), UM(gk), UM(gx), KC_AMPR, KC_MS_L, TO(BASE), TO(BASE), KC_INS, KC_DEL, KC_LBRC, KC_HOME, KC_UP, KC_SPC, KC_LGUI, KC_DOWN, - TO(BASE), X(Rsix), X(Rseven), X(Reight), X(Rnine), X(Rten), KC_BSPC, - KC_PGUP, X(gf), X(gg), X(gc), X(gr), X(gl), KC_EQL, - X(gd), X(gh), X(gt), X(gn), X(gs), KC_MINS, - KC_PGDN, X(gb), X(gm), X(gw), X(gv), X(gz), MO(GREU), + TO(BASE), UM(Rsix), UM(Rseven), UM(Reight), UM(Rnine), UM(Rten), KC_BSPC, + KC_PGUP, UM(gf), UM(gg), UM(gc), UM(gr), UM(gl), KC_EQL, + UM(gd), UM(gh), UM(gt), UM(gn), UM(gs), KC_MINS, + KC_PGDN, UM(gb), UM(gm), UM(gw), UM(gv), UM(gz), MO(GREU), KC_RCTL, KC_RALT, KC_APP, TO(BASE), TO(BASE), KC_END, KC_RBRC, KC_LEFT, KC_RGHT, KC_ENT, KC_SPC ), [GREU] = LAYOUT_ergodox( - KC_ESC, X(Rone), X(Rtwo), X(Rthree), X(Rfour), X(Rfive), KC_GRV, - KC_TAB, KC_QUOT, KC_COMM, KC_DOT, X(Gp), X(Gy), KC_SLSH, - KC_SLSH, X(Ga), X(Go), X(Ge), X(Gu), X(Gi), - KC_TRNS, KC_SCLN, X(Gq), X(Gj), X(Gk), X(Gx), KC_AMPR, + KC_ESC, UM(Rone), UM(Rtwo), UM(Rthree), UM(Rfour), UM(Rfive), KC_GRV, + KC_TAB, KC_QUOT, KC_COMM, KC_DOT, UM(Gp), UM(Gy), KC_SLSH, + KC_SLSH, UM(Ga), UM(Go), UM(Ge), UM(Gu), UM(Gi), + KC_TRNS, KC_SCLN, UM(Gq), UM(Gj), UM(Gk), UM(Gx), KC_AMPR, KC_MS_L, TO(BASE), TO(BASE), KC_INS, KC_DEL, KC_LBRC, KC_HOME, KC_UP, KC_SPC, KC_LGUI, KC_DOWN, - TO(BASE), X(Rsix), X(Rseven), X(Reight), X(Rnine), X(Rten), KC_BSPC, - KC_PGUP, X(Gf), X(Gg), X(Gc), X(Gr), X(Gl), KC_EQL, - X(Gd), X(Gh), X(Gt), X(Gn), X(Gs), KC_MINS, - KC_PGDN, X(Gb), X(Gm), X(Gw), X(Gv), X(Gz), KC_TRNS, + TO(BASE), UM(Rsix), UM(Rseven), UM(Reight), UM(Rnine), UM(Rten), KC_BSPC, + KC_PGUP, UM(Gf), UM(Gg), UM(Gc), UM(Gr), UM(Gl), KC_EQL, + UM(Gd), UM(Gh), UM(Gt), UM(Gn), UM(Gs), KC_MINS, + KC_PGDN, UM(Gb), UM(Gm), UM(Gw), UM(Gv), UM(Gz), KC_TRNS, KC_RCTL, KC_RALT, KC_APP, TO(BASE), TO(BASE), KC_END, KC_RBRC, KC_LEFT, KC_RGHT, KC_ENT, KC_SPC ), [TINY] = LAYOUT_ergodox( - KC_ESC, X(tone), X(ttwo), X(tthree), X(tfour), X(tfive), KC_GRV, - KC_TAB, KC_QUOT, KC_COMM, KC_DOT, X(tp), X(ty), KC_SLSH, - KC_SLSH, X(ta), X(to), X(te), X(tu), X(ti), - KC_TRNS, KC_SCLN, X(tq), X(tj), X(tk), X(tx), KC_AMPR, + KC_ESC, UM(tone), UM(ttwo), UM(tthree), UM(tfour), UM(tfive), KC_GRV, + KC_TAB, KC_QUOT, KC_COMM, KC_DOT, UM(tp), UM(ty), KC_SLSH, + KC_SLSH, UM(ta), UM(to), UM(te), UM(tu), UM(ti), + KC_TRNS, KC_SCLN, UM(tq), UM(tj), UM(tk), UM(tx), KC_AMPR, KC_MS_L, TO(BASE), TO(BASE), KC_INS, KC_DEL, KC_LBRC, KC_HOME, KC_UP, KC_SPC, KC_LGUI, KC_DOWN, - TO(BASE), X(tsix), X(tseven), X(teight), X(tnine), X(tzero), KC_BSPC, - KC_PGUP, X(tf), X(tg), X(tc), X(tr), X(tl), KC_EQL, - X(td), X(th), X(tt), X(tn), X(ts), KC_MINS, - KC_PGDN, X(tb), X(tm), X(tw), X(tv), X(tz), KC_TRNS, + TO(BASE), UM(tsix), UM(tseven), UM(teight), UM(tnine), UM(tzero), KC_BSPC, + KC_PGUP, UM(tf), UM(tg), UM(tc), UM(tr), UM(tl), KC_EQL, + UM(td), UM(th), UM(tt), UM(tn), UM(ts), KC_MINS, + KC_PGDN, UM(tb), UM(tm), UM(tw), UM(tv), UM(tz), KC_TRNS, KC_RCTL, KC_RALT, KC_APP, TO(BASE), TO(BASE), KC_END, KC_RBRC, KC_LEFT, KC_RGHT, KC_ENT, KC_SPC ), [FULL] = LAYOUT_ergodox( - KC_ESC, X(fwone), X(fwtwo), X(fwthree), X(fwfour), X(fwfive), KC_GRV, - KC_TAB, KC_QUOT, KC_COMM, KC_DOT, X(fwp), X(fwy), KC_SLSH, - KC_SLSH, X(fwa), X(fwo), X(fwe), X(fwu), X(fwi), - MO(FULU), KC_SCLN, X(fwq), X(fwj), X(fwk), X(fwx), KC_AMPR, + KC_ESC, UM(fwone), UM(fwtwo), UM(fwthree), UM(fwfour), UM(fwfive), KC_GRV, + KC_TAB, KC_QUOT, KC_COMM, KC_DOT, UM(fwp), UM(fwy), KC_SLSH, + KC_SLSH, UM(fwa), UM(fwo), UM(fwe), UM(fwu), UM(fwi), + MO(FULU), KC_SCLN, UM(fwq), UM(fwj), UM(fwk), UM(fwx), KC_AMPR, KC_MS_L, TO(BASE), TO(BASE), KC_INS, KC_DEL, KC_LBRC, KC_HOME, KC_UP, KC_SPC, KC_LGUI, KC_DOWN, - TO(BASE), X(fwsix), X(fwseven), X(fweight), X(fwnine), X(fwzero), KC_BSPC, - KC_PGUP, X(fwf), X(fwg), X(fwc), X(fwr), X(fwl), KC_EQL, - X(fwd), X(fwh), X(fwt), X(fwn), X(fws), KC_MINS, - KC_PGDN, X(fwb), X(fwm), X(fww), X(fwv), X(fwz), MO(FULU), + TO(BASE), UM(fwsix), UM(fwseven), UM(fweight), UM(fwnine), UM(fwzero), KC_BSPC, + KC_PGUP, UM(fwf), UM(fwg), UM(fwc), UM(fwr), UM(fwl), KC_EQL, + UM(fwd), UM(fwh), UM(fwt), UM(fwn), UM(fws), KC_MINS, + KC_PGDN, UM(fwb), UM(fwm), UM(fww), UM(fwv), UM(fwz), MO(FULU), KC_RCTL, KC_RALT, KC_APP, TO(BASE), TO(BASE), KC_END, KC_RBRC, KC_LEFT, KC_RGHT, KC_ENT, KC_SPC ), [FULU] = LAYOUT_ergodox( - KC_ESC, X(Fwone), X(Fwtwo), X(Fwthree), X(Fwfour), X(Fwfive), KC_GRV, - KC_TAB, KC_QUOT, KC_COMM, KC_DOT, X(Fwp), X(Fwy), KC_SLSH, - KC_SLSH, X(Fwa), X(Fwo), X(Fwe), X(Fwu), X(Fwi), - KC_TRNS, KC_SCLN, X(Fwq), X(Fwj), X(Fwk), X(Fwx), KC_AMPR, + KC_ESC, UM(Fwone), UM(Fwtwo), UM(Fwthree), UM(Fwfour), UM(Fwfive), KC_GRV, + KC_TAB, KC_QUOT, KC_COMM, KC_DOT, UM(Fwp), UM(Fwy), KC_SLSH, + KC_SLSH, UM(Fwa), UM(Fwo), UM(Fwe), UM(Fwu), UM(Fwi), + KC_TRNS, KC_SCLN, UM(Fwq), UM(Fwj), UM(Fwk), UM(Fwx), KC_AMPR, KC_MS_L, TO(BASE), TO(BASE), KC_INS, KC_DEL, KC_LBRC, KC_HOME, KC_UP, KC_SPC, KC_LGUI, KC_DOWN, - TO(BASE), X(Fwsix), X(Fwseven), X(Fweight), X(Fwnine), X(Fwzero), KC_BSPC, - KC_PGUP, X(Fwf), X(Fwg), X(Fwc), X(Fwr), X(Fwl), KC_EQL, - X(Fwd), X(Fwh), X(Fwt), X(Fwn), X(Fws), KC_MINS, - KC_PGDN, X(Fwb), X(Fwm), X(Fww), X(Fwv), X(Fwz), KC_TRNS, + TO(BASE), UM(Fwsix), UM(Fwseven), UM(Fweight), UM(Fwnine), UM(Fwzero), KC_BSPC, + KC_PGUP, UM(Fwf), UM(Fwg), UM(Fwc), UM(Fwr), UM(Fwl), KC_EQL, + UM(Fwd), UM(Fwh), UM(Fwt), UM(Fwn), UM(Fws), KC_MINS, + KC_PGDN, UM(Fwb), UM(Fwm), UM(Fww), UM(Fwv), UM(Fwz), KC_TRNS, KC_RCTL, KC_RALT, KC_APP, TO(BASE), TO(BASE), KC_END, KC_RBRC, KC_LEFT, KC_RGHT, KC_ENT, KC_SPC ), diff --git a/keyboards/ktec/staryu/config.h b/keyboards/ktec/staryu/config.h index 31f2930ac1..58fa32d052 100755 --- a/keyboards/ktec/staryu/config.h +++ b/keyboards/ktec/staryu/config.h @@ -16,7 +16,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. */ #pragma once -#define RGBLED_NUM 1 // Number of LEDs #define RGBLIGHT_EFFECT_BREATHING #define RGBLIGHT_EFFECT_RAINBOW_MOOD #define RGBLIGHT_EFFECT_RAINBOW_SWIRL diff --git a/keyboards/ktec/staryu/info.json b/keyboards/ktec/staryu/info.json index 3600de0c35..da277a0ae0 100644 --- a/keyboards/ktec/staryu/info.json +++ b/keyboards/ktec/staryu/info.json @@ -19,6 +19,7 @@ "pin": "C6" }, "rgblight": { + "led_count": 1, "max_brightness": 200 }, "processor": "atmega32u2", diff --git a/keyboards/kudox/columner/config.h b/keyboards/kudox/columner/config.h index 7506090b1e..50bfb15d21 100644 --- a/keyboards/kudox/columner/config.h +++ b/keyboards/kudox/columner/config.h @@ -21,8 +21,6 @@ /* Locking resynchronize hack */ #define LOCKING_RESYNC_ENABLE -#undef RGBLED_NUM -#define RGBLED_NUM 14 // Number of LEDs #define RGBLIGHT_EFFECT_BREATHING #define RGBLIGHT_EFFECT_RAINBOW_MOOD #define RGBLIGHT_EFFECT_RAINBOW_SWIRL @@ -33,9 +31,6 @@ #define RGBLIGHT_EFFECT_RGB_TEST #define RGBLIGHT_EFFECT_ALTERNATING #define RGBLIGHT_EFFECT_TWINKLE -#define RGBLIGHT_HUE_STEP 8 -#define RGBLIGHT_SAT_STEP 8 -#define RGBLIGHT_VAL_STEP 8 /* * Feature disable options diff --git a/keyboards/kudox/columner/info.json b/keyboards/kudox/columner/info.json index 7c106b1448..24e407dd69 100644 --- a/keyboards/kudox/columner/info.json +++ b/keyboards/kudox/columner/info.json @@ -16,6 +16,11 @@ "split": { "soft_serial_pin": "D0" }, + "rgblight": { + "saturation_steps": 8, + "brightness_steps": 8, + "led_count": 14 + }, "ws2812": { "pin": "D3" }, diff --git a/keyboards/kudox/rev1/config.h b/keyboards/kudox/rev1/config.h index 80ac84c64f..c3b8d1f4e4 100644 --- a/keyboards/kudox/rev1/config.h +++ b/keyboards/kudox/rev1/config.h @@ -21,8 +21,6 @@ /* Locking resynchronize hack */ #define LOCKING_RESYNC_ENABLE -#undef RGBLED_NUM -#define RGBLED_NUM 14 // Number of LEDs #define RGBLIGHT_EFFECT_BREATHING #define RGBLIGHT_EFFECT_RAINBOW_MOOD #define RGBLIGHT_EFFECT_RAINBOW_SWIRL @@ -33,9 +31,6 @@ #define RGBLIGHT_EFFECT_RGB_TEST #define RGBLIGHT_EFFECT_ALTERNATING #define RGBLIGHT_EFFECT_TWINKLE -#define RGBLIGHT_HUE_STEP 8 -#define RGBLIGHT_SAT_STEP 8 -#define RGBLIGHT_VAL_STEP 8 /* * Feature disable options diff --git a/keyboards/kudox/rev1/info.json b/keyboards/kudox/rev1/info.json index efb55bb989..52f61965f9 100644 --- a/keyboards/kudox/rev1/info.json +++ b/keyboards/kudox/rev1/info.json @@ -16,6 +16,11 @@ "split": { "soft_serial_pin": "D0" }, + "rgblight": { + "saturation_steps": 8, + "brightness_steps": 8, + "led_count": 14 + }, "ws2812": { "pin": "D3" }, diff --git a/keyboards/kudox/rev2/config.h b/keyboards/kudox/rev2/config.h index 80ac84c64f..c3b8d1f4e4 100644 --- a/keyboards/kudox/rev2/config.h +++ b/keyboards/kudox/rev2/config.h @@ -21,8 +21,6 @@ /* Locking resynchronize hack */ #define LOCKING_RESYNC_ENABLE -#undef RGBLED_NUM -#define RGBLED_NUM 14 // Number of LEDs #define RGBLIGHT_EFFECT_BREATHING #define RGBLIGHT_EFFECT_RAINBOW_MOOD #define RGBLIGHT_EFFECT_RAINBOW_SWIRL @@ -33,9 +31,6 @@ #define RGBLIGHT_EFFECT_RGB_TEST #define RGBLIGHT_EFFECT_ALTERNATING #define RGBLIGHT_EFFECT_TWINKLE -#define RGBLIGHT_HUE_STEP 8 -#define RGBLIGHT_SAT_STEP 8 -#define RGBLIGHT_VAL_STEP 8 /* * Feature disable options diff --git a/keyboards/kudox/rev2/info.json b/keyboards/kudox/rev2/info.json index 9dab738c38..6819224bc7 100644 --- a/keyboards/kudox/rev2/info.json +++ b/keyboards/kudox/rev2/info.json @@ -16,6 +16,11 @@ "split": { "soft_serial_pin": "D0" }, + "rgblight": { + "saturation_steps": 8, + "brightness_steps": 8, + "led_count": 14 + }, "ws2812": { "pin": "D3" }, diff --git a/keyboards/kudox/rev3/config.h b/keyboards/kudox/rev3/config.h index 7506090b1e..50bfb15d21 100644 --- a/keyboards/kudox/rev3/config.h +++ b/keyboards/kudox/rev3/config.h @@ -21,8 +21,6 @@ /* Locking resynchronize hack */ #define LOCKING_RESYNC_ENABLE -#undef RGBLED_NUM -#define RGBLED_NUM 14 // Number of LEDs #define RGBLIGHT_EFFECT_BREATHING #define RGBLIGHT_EFFECT_RAINBOW_MOOD #define RGBLIGHT_EFFECT_RAINBOW_SWIRL @@ -33,9 +31,6 @@ #define RGBLIGHT_EFFECT_RGB_TEST #define RGBLIGHT_EFFECT_ALTERNATING #define RGBLIGHT_EFFECT_TWINKLE -#define RGBLIGHT_HUE_STEP 8 -#define RGBLIGHT_SAT_STEP 8 -#define RGBLIGHT_VAL_STEP 8 /* * Feature disable options diff --git a/keyboards/kudox/rev3/info.json b/keyboards/kudox/rev3/info.json index a7e73c84ae..9981c3b88d 100644 --- a/keyboards/kudox/rev3/info.json +++ b/keyboards/kudox/rev3/info.json @@ -16,6 +16,11 @@ "split": { "soft_serial_pin": "D0" }, + "rgblight": { + "saturation_steps": 8, + "brightness_steps": 8, + "led_count": 14 + }, "ws2812": { "pin": "D3" }, diff --git a/keyboards/kudox_full/rev1/config.h b/keyboards/kudox_full/rev1/config.h index 84d08bce54..8e4ecc9efc 100644 --- a/keyboards/kudox_full/rev1/config.h +++ b/keyboards/kudox_full/rev1/config.h @@ -8,8 +8,6 @@ /* Locking resynchronize hack */ #define LOCKING_RESYNC_ENABLE -#undef RGBLED_NUM -#define RGBLED_NUM 14 // Number of LEDs #define RGBLIGHT_EFFECT_BREATHING #define RGBLIGHT_EFFECT_RAINBOW_MOOD #define RGBLIGHT_EFFECT_RAINBOW_SWIRL @@ -17,9 +15,6 @@ #define RGBLIGHT_EFFECT_KNIGHT #define RGBLIGHT_EFFECT_CHRISTMAS #define RGBLIGHT_EFFECT_STATIC_GRADIENT -#define RGBLIGHT_HUE_STEP 8 -#define RGBLIGHT_SAT_STEP 8 -#define RGBLIGHT_VAL_STEP 8 /* * Feature disable options diff --git a/keyboards/kudox_full/rev1/info.json b/keyboards/kudox_full/rev1/info.json index 45958b56c9..3abfc76f52 100644 --- a/keyboards/kudox_full/rev1/info.json +++ b/keyboards/kudox_full/rev1/info.json @@ -16,6 +16,11 @@ "split": { "soft_serial_pin": "D2" }, + "rgblight": { + "saturation_steps": 8, + "brightness_steps": 8, + "led_count": 14 + }, "ws2812": { "pin": "D3" }, diff --git a/keyboards/kudox_game/rev1/config.h b/keyboards/kudox_game/rev1/config.h index 5fddd8102a..2c5375a226 100644 --- a/keyboards/kudox_game/rev1/config.h +++ b/keyboards/kudox_game/rev1/config.h @@ -22,8 +22,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. /* Locking resynchronize hack */ #define LOCKING_RESYNC_ENABLE -#undef RGBLED_NUM -#define RGBLED_NUM 7 // Number of LEDs #define RGBLIGHT_EFFECT_BREATHING #define RGBLIGHT_EFFECT_RAINBOW_MOOD #define RGBLIGHT_EFFECT_RAINBOW_SWIRL @@ -34,9 +32,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #define RGBLIGHT_EFFECT_RGB_TEST #define RGBLIGHT_EFFECT_ALTERNATING #define RGBLIGHT_EFFECT_TWINKLE -#define RGBLIGHT_HUE_STEP 8 -#define RGBLIGHT_SAT_STEP 8 -#define RGBLIGHT_VAL_STEP 8 /* * Feature disable options diff --git a/keyboards/kudox_game/rev1/info.json b/keyboards/kudox_game/rev1/info.json index 7868308ead..5fbf2031ea 100644 --- a/keyboards/kudox_game/rev1/info.json +++ b/keyboards/kudox_game/rev1/info.json @@ -2,6 +2,11 @@ "usb": { "device_version": "1.0.0" }, + "rgblight": { + "saturation_steps": 8, + "brightness_steps": 8, + "led_count": 7 + }, "ws2812": { "pin": "D3" }, diff --git a/keyboards/kudox_game/rev2/config.h b/keyboards/kudox_game/rev2/config.h index 7b6ef67bd9..33806a1d7e 100644 --- a/keyboards/kudox_game/rev2/config.h +++ b/keyboards/kudox_game/rev2/config.h @@ -22,8 +22,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. /* Locking resynchronize hack */ #define LOCKING_RESYNC_ENABLE -#undef RGBLED_NUM -#define RGBLED_NUM 7 // Number of LEDs #define RGBLIGHT_EFFECT_BREATHING #define RGBLIGHT_EFFECT_RAINBOW_MOOD #define RGBLIGHT_EFFECT_RAINBOW_SWIRL @@ -34,9 +32,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #define RGBLIGHT_EFFECT_RGB_TEST #define RGBLIGHT_EFFECT_ALTERNATING #define RGBLIGHT_EFFECT_TWINKLE -#define RGBLIGHT_HUE_STEP 8 -#define RGBLIGHT_SAT_STEP 8 -#define RGBLIGHT_VAL_STEP 8 /* * Feature disable options diff --git a/keyboards/kudox_game/rev2/info.json b/keyboards/kudox_game/rev2/info.json index 4a441b7385..eb8a5a9fb6 100644 --- a/keyboards/kudox_game/rev2/info.json +++ b/keyboards/kudox_game/rev2/info.json @@ -2,6 +2,11 @@ "usb": { "device_version": "2.0.0" }, + "rgblight": { + "saturation_steps": 8, + "brightness_steps": 8, + "led_count": 7 + }, "ws2812": { "pin": "D3" }, diff --git a/keyboards/labyrinth75/config.h b/keyboards/labyrinth75/config.h index 8ff700ade8..e28d2b1898 100644 --- a/keyboards/labyrinth75/config.h +++ b/keyboards/labyrinth75/config.h @@ -17,11 +17,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #pragma once -#define RGBLED_NUM 6 -//# define RGBLIGHT_HUE_STEP 8 -//# define RGBLIGHT_SAT_STEP 8 -//# define RGBLIGHT_VAL_STEP 8 -//# define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */ #define RGBLIGHT_EFFECT_BREATHING #define RGBLIGHT_EFFECT_RAINBOW_MOOD #define RGBLIGHT_EFFECT_RAINBOW_SWIRL diff --git a/keyboards/labyrinth75/info.json b/keyboards/labyrinth75/info.json index 797627865e..c88af7f9f0 100644 --- a/keyboards/labyrinth75/info.json +++ b/keyboards/labyrinth75/info.json @@ -16,6 +16,9 @@ "bootmagic": { "matrix": [0, 2] }, + "rgblight": { + "led_count": 6 + }, "ws2812": { "pin": "B0" }, diff --git a/keyboards/late9/rev1/config.h b/keyboards/late9/rev1/config.h index e6fcd30ebe..8c9a5702f2 100644 --- a/keyboards/late9/rev1/config.h +++ b/keyboards/late9/rev1/config.h @@ -16,8 +16,5 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. */ #pragma once -/* Tap interval for tap dance */ -#define TAPPING_TERM 400 - /* Oneshot interval */ #define ONESHOT_TIMEOUT 5000 diff --git a/keyboards/late9/rev1/info.json b/keyboards/late9/rev1/info.json index 7d3a710bc5..408bb746bf 100644 --- a/keyboards/late9/rev1/info.json +++ b/keyboards/late9/rev1/info.json @@ -8,6 +8,9 @@ "pid": "0x3777", "device_version": "0.1.0" }, + "tapping": { + "term": 400 + }, "matrix_pins": { "cols": ["B5", "C6", "D4"], "rows": ["B4", "E6", "D7", "B3", "B2", "B6"] diff --git a/keyboards/latincompass/latin17rgb/config.h b/keyboards/latincompass/latin17rgb/config.h index 8b64704638..1d201d34a0 100644 --- a/keyboards/latincompass/latin17rgb/config.h +++ b/keyboards/latincompass/latin17rgb/config.h @@ -95,8 +95,3 @@ #define RGBLIGHT_EFFECT_RGB_TEST #define RGBLIGHT_EFFECT_ALTERNATING #define RGBLIGHT_EFFECT_TWINKLE -#define RGBLED_NUM 8 -#define RGBLIGHT_HUE_STEP 5 -#define RGBLIGHT_SAT_STEP 5 -#define RGBLIGHT_VAL_STEP 5 -#define RGBLIGHT_SLEEP diff --git a/keyboards/latincompass/latin17rgb/info.json b/keyboards/latincompass/latin17rgb/info.json index 7a5a6fbb6d..ad61a4f354 100644 --- a/keyboards/latincompass/latin17rgb/info.json +++ b/keyboards/latincompass/latin17rgb/info.json @@ -8,6 +8,13 @@ "pid": "0x7C97", "device_version": "0.0.1" }, + "rgblight": { + "hue_steps": 5, + "saturation_steps": 5, + "brightness_steps": 5, + "led_count": 8, + "sleep": true + }, "ws2812": { "pin": "B7" }, diff --git a/keyboards/latincompass/latin47ble/config.h b/keyboards/latincompass/latin47ble/config.h index 6068bc87d9..f9b76ecd88 100644 --- a/keyboards/latincompass/latin47ble/config.h +++ b/keyboards/latincompass/latin47ble/config.h @@ -16,11 +16,6 @@ #pragma once - #define RGBLED_NUM 3 - #define RGBLIGHT_HUE_STEP 8 - #define RGBLIGHT_SAT_STEP 8 - #define RGBLIGHT_VAL_STEP 8 -// #define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */ #define RGBLIGHT_EFFECT_BREATHING #define RGBLIGHT_EFFECT_RAINBOW_MOOD #define RGBLIGHT_EFFECT_RAINBOW_SWIRL @@ -32,8 +27,6 @@ #define RGBLIGHT_EFFECT_ALTERNATING #define RGBLIGHT_EFFECT_TWINKLE -#define TAPPING_TERM 250 - /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ #define LOCKING_SUPPORT_ENABLE /* Locking resynchronize hack */ diff --git a/keyboards/latincompass/latin47ble/info.json b/keyboards/latincompass/latin47ble/info.json index b9a9b7eb95..befa51fdab 100644 --- a/keyboards/latincompass/latin47ble/info.json +++ b/keyboards/latincompass/latin47ble/info.json @@ -13,6 +13,14 @@ "rows": ["D0", "D1", "D2", "D3"] }, "diode_direction": "COL2ROW", + "rgblight": { + "saturation_steps": 8, + "brightness_steps": 8, + "led_count": 3 + }, + "tapping": { + "term": 250 + }, "ws2812": { "pin": "B7" }, diff --git a/keyboards/latincompass/latin64ble/config.h b/keyboards/latincompass/latin64ble/config.h index 326f4795c0..1b27e5b254 100644 --- a/keyboards/latincompass/latin64ble/config.h +++ b/keyboards/latincompass/latin64ble/config.h @@ -15,10 +15,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.*/ #pragma once -#define RGBLED_NUM 2 -#define RGB_MATRIX_LED_COUNT RGBLED_NUM - -#define RGBLIGHT_VAL_STEP 25 #define RGBLIGHT_EFFECT_KNIGHT_OFFSET 20 #define RGBLIGHT_EFFECT_BREATHING #define RGBLIGHT_EFFECT_RAINBOW_MOOD diff --git a/keyboards/latincompass/latin64ble/info.json b/keyboards/latincompass/latin64ble/info.json index d59a5fb02c..e36572a1d0 100644 --- a/keyboards/latincompass/latin64ble/info.json +++ b/keyboards/latincompass/latin64ble/info.json @@ -8,6 +8,10 @@ "pid": "0x6C71", "device_version": "0.0.1" }, + "rgblight": { + "brightness_steps": 25, + "led_count": 2 + }, "ws2812": { "pin": "B7" }, diff --git a/keyboards/latincompass/latinpad/config.h b/keyboards/latincompass/latinpad/config.h index d166baebc7..d68f3b9241 100644 --- a/keyboards/latincompass/latinpad/config.h +++ b/keyboards/latincompass/latinpad/config.h @@ -18,8 +18,7 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.*/ #define SSD1306OLED -#define RGBLED_NUM 18 -#define RGB_MATRIX_LED_COUNT RGBLED_NUM +#define RGB_MATRIX_LED_COUNT 18 // RGB Matrix Animation modes. Explicitly enabled // For full list of effects, see: // https://docs.qmk.fm/#/feature_rgb_matrix?id=rgb-matrix-effects diff --git a/keyboards/lazydesigners/bolt/config.h b/keyboards/lazydesigners/bolt/config.h index 218631d1d5..b6b58fc4a9 100644 --- a/keyboards/lazydesigners/bolt/config.h +++ b/keyboards/lazydesigners/bolt/config.h @@ -28,8 +28,3 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #define RGBLIGHT_EFFECT_RGB_TEST #define RGBLIGHT_EFFECT_ALTERNATING #define RGBLIGHT_EFFECT_TWINKLE - #define RGBLIGHT_SLEEP - #define RGBLED_NUM 13 - /* #define RGBLIGHT_HUE_STEP 8 */ - /* #define RGBLIGHT_SAT_STEP 8 */ - /* #define RGBLIGHT_VAL_STEP 8 */ diff --git a/keyboards/lazydesigners/bolt/info.json b/keyboards/lazydesigners/bolt/info.json index a12226cf51..4b8e756486 100644 --- a/keyboards/lazydesigners/bolt/info.json +++ b/keyboards/lazydesigners/bolt/info.json @@ -8,6 +8,10 @@ "pid": "0x0041", "device_version": "0.0.1" }, + "rgblight": { + "led_count": 13, + "sleep": true + }, "ws2812": { "pin": "E6" }, diff --git a/keyboards/lazydesigners/cassette8/config.h b/keyboards/lazydesigners/cassette8/config.h index 23284233ef..58cdcff32f 100755 --- a/keyboards/lazydesigners/cassette8/config.h +++ b/keyboards/lazydesigners/cassette8/config.h @@ -27,8 +27,3 @@ #define RGBLIGHT_EFFECT_RGB_TEST #define RGBLIGHT_EFFECT_ALTERNATING #define RGBLIGHT_EFFECT_TWINKLE - #define RGBLIGHT_SLEEP - #define RGBLED_NUM 15 - /* #define RGBLIGHT_HUE_STEP 8 */ - /* #define RGBLIGHT_SAT_STEP 8 */ - /* #define RGBLIGHT_VAL_STEP 8 */ diff --git a/keyboards/lazydesigners/cassette8/info.json b/keyboards/lazydesigners/cassette8/info.json index d01080fabf..e4fb627f5f 100755 --- a/keyboards/lazydesigners/cassette8/info.json +++ b/keyboards/lazydesigners/cassette8/info.json @@ -8,6 +8,10 @@ "pid": "0x0008", "device_version": "0.0.1" }, + "rgblight": { + "led_count": 15, + "sleep": true + }, "ws2812": { "pin": "C2" }, diff --git a/keyboards/lazydesigners/dimple/config.h b/keyboards/lazydesigners/dimple/config.h index 0dc7502eac..8d5ae37ff6 100644 --- a/keyboards/lazydesigners/dimple/config.h +++ b/keyboards/lazydesigners/dimple/config.h @@ -34,8 +34,3 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #define RGBLIGHT_EFFECT_RGB_TEST #define RGBLIGHT_EFFECT_ALTERNATING #define RGBLIGHT_EFFECT_TWINKLE - #define RGBLIGHT_SLEEP - #define RGBLED_NUM 50 - /* #define RGBLIGHT_HUE_STEP 8 */ - /* #define RGBLIGHT_SAT_STEP 8 */ - /* #define RGBLIGHT_VAL_STEP 8 */ diff --git a/keyboards/lazydesigners/dimple/ortho/info.json b/keyboards/lazydesigners/dimple/ortho/info.json index fc23ad45c5..e05754d0b8 100644 --- a/keyboards/lazydesigners/dimple/ortho/info.json +++ b/keyboards/lazydesigners/dimple/ortho/info.json @@ -13,6 +13,10 @@ "rows": ["D0", "D1", "D2", "D3"] }, "diode_direction": "COL2ROW", + "rgblight": { + "led_count": 50, + "sleep": true + }, "ws2812": { "pin": "B7" }, diff --git a/keyboards/lazydesigners/dimple/staggered/info.json b/keyboards/lazydesigners/dimple/staggered/info.json index 1ffe78fc5c..c0fefad6eb 100644 --- a/keyboards/lazydesigners/dimple/staggered/info.json +++ b/keyboards/lazydesigners/dimple/staggered/info.json @@ -8,6 +8,10 @@ "pid": "0x0040", "device_version": "0.0.1" }, + "rgblight": { + "led_count": 50, + "sleep": true + }, "ws2812": { "pin": "B7" }, diff --git a/keyboards/lazydesigners/dimple/staggered/keymaps/tominabox1/keymap.c b/keyboards/lazydesigners/dimple/staggered/keymaps/tominabox1/keymap.c index cdaade987f..d1917e4aa7 100644 --- a/keyboards/lazydesigners/dimple/staggered/keymaps/tominabox1/keymap.c +++ b/keyboards/lazydesigners/dimple/staggered/keymaps/tominabox1/keymap.c @@ -100,10 +100,11 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { ), }; -void led_set_user(uint8_t usb_led) { -if (IS_LED_ON(usb_led, USB_LED_CAPS_LOCK)) { +bool led_update_user(led_t led_state) { +if (led_state.caps_lock) { writePinLow(E6); } else { writePinHigh(E6); } + return false; } diff --git a/keyboards/lazydesigners/dimpleplus/config.h b/keyboards/lazydesigners/dimpleplus/config.h index 828667122d..b6b58fc4a9 100644 --- a/keyboards/lazydesigners/dimpleplus/config.h +++ b/keyboards/lazydesigners/dimpleplus/config.h @@ -28,8 +28,3 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #define RGBLIGHT_EFFECT_RGB_TEST #define RGBLIGHT_EFFECT_ALTERNATING #define RGBLIGHT_EFFECT_TWINKLE - #define RGBLIGHT_SLEEP - #define RGBLED_NUM 8 - /* #define RGBLIGHT_HUE_STEP 8 */ - /* #define RGBLIGHT_SAT_STEP 8 */ - /* #define RGBLIGHT_VAL_STEP 8 */ diff --git a/keyboards/lazydesigners/dimpleplus/info.json b/keyboards/lazydesigners/dimpleplus/info.json index 0d47a51f95..4deb68ad63 100644 --- a/keyboards/lazydesigners/dimpleplus/info.json +++ b/keyboards/lazydesigners/dimpleplus/info.json @@ -16,6 +16,10 @@ "backlight": { "pin": "B7" }, + "rgblight": { + "led_count": 8, + "sleep": true + }, "ws2812": { "pin": "D2" }, diff --git a/keyboards/lazydesigners/the40/config.h b/keyboards/lazydesigners/the40/config.h index 8a326c3ba0..caac1c9110 100644 --- a/keyboards/lazydesigners/the40/config.h +++ b/keyboards/lazydesigners/the40/config.h @@ -17,11 +17,6 @@ #pragma once - #define RGBLED_NUM 8 - #define RGBLIGHT_HUE_STEP 8 - #define RGBLIGHT_SAT_STEP 8 - #define RGBLIGHT_VAL_STEP 8 - #define RGBLIGHT_SLEEP #define RGBLIGHT_EFFECT_BREATHING #define RGBLIGHT_EFFECT_RAINBOW_MOOD #define RGBLIGHT_EFFECT_RAINBOW_SWIRL diff --git a/keyboards/lazydesigners/the40/info.json b/keyboards/lazydesigners/the40/info.json index e7aab1bea3..cf9fd56f69 100644 --- a/keyboards/lazydesigners/the40/info.json +++ b/keyboards/lazydesigners/the40/info.json @@ -17,6 +17,12 @@ "pin": "B7", "breathing": true }, + "rgblight": { + "saturation_steps": 8, + "brightness_steps": 8, + "led_count": 8, + "sleep": true + }, "ws2812": { "pin": "C7" }, diff --git a/keyboards/lazydesigners/the50/config.h b/keyboards/lazydesigners/the50/config.h index 366d9d3325..5f36081323 100644 --- a/keyboards/lazydesigners/the50/config.h +++ b/keyboards/lazydesigners/the50/config.h @@ -5,6 +5,3 @@ /* Locking resynchronize hack */ #define LOCKING_RESYNC_ENABLE - -#define RGBLED_NUM 1 -#define RGBLIGHT_SLEEP diff --git a/keyboards/lazydesigners/the50/info.json b/keyboards/lazydesigners/the50/info.json index f29e8dfe0d..0c76516e80 100644 --- a/keyboards/lazydesigners/the50/info.json +++ b/keyboards/lazydesigners/the50/info.json @@ -17,6 +17,10 @@ "pin": "B6", "levels": 6 }, + "rgblight": { + "led_count": 1, + "sleep": true + }, "ws2812": { "pin": "E6" }, diff --git a/keyboards/lazydesigners/the50/keymaps/default/keymap.c b/keyboards/lazydesigners/the50/keymaps/default/keymap.c index 5d8ea732f6..61e6ee878c 100644 --- a/keyboards/lazydesigners/the50/keymaps/default/keymap.c +++ b/keyboards/lazydesigners/the50/keymaps/default/keymap.c @@ -49,11 +49,12 @@ EE_CLR, _______, _______, _______, _______, ) }; -void led_set_user(uint8_t usb_led) { +bool led_update_user(led_t led_state) { // Turn LED On/Off for Caps Lock - if (host_keyboard_leds() & (1 << USB_LED_CAPS_LOCK)) { + if (led_state.caps_lock) { the50_led_on(); } else { the50_led_off(); } + return false; } diff --git a/keyboards/lazydesigners/the50/keymaps/mikethetiger/keymap.c b/keyboards/lazydesigners/the50/keymaps/mikethetiger/keymap.c index 8986fd6c3d..c384c3c520 100644 --- a/keyboards/lazydesigners/the50/keymaps/mikethetiger/keymap.c +++ b/keyboards/lazydesigners/the50/keymaps/mikethetiger/keymap.c @@ -69,11 +69,12 @@ EE_CLR, _______, _______, _______, _______, ) }; -void led_set_user(uint8_t usb_led) { +bool led_update_user(led_t led_state) { // Turn LED On/Off for Caps Lock - if (host_keyboard_leds() & (1 << USB_LED_CAPS_LOCK)) { + if (led_state.caps_lock) { the50_led_on(); } else { the50_led_off(); } + return false; } diff --git a/keyboards/lazydesigners/the60/rev2/config.h b/keyboards/lazydesigners/the60/rev2/config.h index 19bd7fbb1f..ba5892e34f 100755 --- a/keyboards/lazydesigners/the60/rev2/config.h +++ b/keyboards/lazydesigners/the60/rev2/config.h @@ -17,11 +17,6 @@ #pragma once - #define RGBLED_NUM 10 - #define RGBLIGHT_HUE_STEP 8 - #define RGBLIGHT_SAT_STEP 8 - #define RGBLIGHT_VAL_STEP 8 - #define RGBLIGHT_SLEEP #define RGBLIGHT_EFFECT_BREATHING #define RGBLIGHT_EFFECT_RAINBOW_MOOD #define RGBLIGHT_EFFECT_RAINBOW_SWIRL diff --git a/keyboards/lazydesigners/the60/rev2/info.json b/keyboards/lazydesigners/the60/rev2/info.json index 7a5dce5906..442e7b8d09 100755 --- a/keyboards/lazydesigners/the60/rev2/info.json +++ b/keyboards/lazydesigners/the60/rev2/info.json @@ -18,6 +18,12 @@ "levels": 5, "breathing": true }, + "rgblight": { + "saturation_steps": 8, + "brightness_steps": 8, + "led_count": 10, + "sleep": true + }, "ws2812": { "pin": "D1" }, diff --git a/keyboards/leafcutterlabs/bigknob/config.h b/keyboards/leafcutterlabs/bigknob/config.h index d8b9a4fa0b..935f89491e 100644 --- a/keyboards/leafcutterlabs/bigknob/config.h +++ b/keyboards/leafcutterlabs/bigknob/config.h @@ -28,4 +28,3 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #define RGBLIGHT_EFFECT_RGB_TEST #define RGBLIGHT_EFFECT_ALTERNATING #define RGBLIGHT_EFFECT_TWINKLE -#define RGBLED_NUM 5 // Number of LEDs diff --git a/keyboards/leafcutterlabs/bigknob/info.json b/keyboards/leafcutterlabs/bigknob/info.json index 1361138549..f411b702da 100644 --- a/keyboards/leafcutterlabs/bigknob/info.json +++ b/keyboards/leafcutterlabs/bigknob/info.json @@ -13,6 +13,9 @@ {"pin_a": "D0", "pin_b": "D2"} ] }, + "rgblight": { + "led_count": 5 + }, "ws2812": { "pin": "C7" }, diff --git a/keyboards/leeku/finger65/config.h b/keyboards/leeku/finger65/config.h deleted file mode 100644 index 0626eb5d0e..0000000000 --- a/keyboards/leeku/finger65/config.h +++ /dev/null @@ -1,21 +0,0 @@ -/* -Copyright 2018 Rasmus Schults <rasmusx@gmail.com> - -This program is free software: you can redistribute it and/or modify -it under the terms of the GNU General Public License as published by -the Free Software Foundation, either version 2 of the License, or -(at your option) any later version. - -This program is distributed in the hope that it will be useful, -but WITHOUT ANY WARRANTY; without even the implied warranty of -MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -GNU General Public License for more details. - -You should have received a copy of the GNU General Public License -along with this program. If not, see <http://www.gnu.org/licenses/>. -*/ - -#pragma once - - -#define RGBLED_NUM 12 diff --git a/keyboards/lets_split/rev1/config.h b/keyboards/lets_split/rev1/config.h index a7b7c4843e..0b8941e776 100644 --- a/keyboards/lets_split/rev1/config.h +++ b/keyboards/lets_split/rev1/config.h @@ -23,8 +23,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. /* Locking resynchronize hack */ #define LOCKING_RESYNC_ENABLE -#define RGBLED_NUM 16 // Number of LEDs - /* * Feature disable options * These options are also useful to firmware size reduction. diff --git a/keyboards/lets_split/rev1/info.json b/keyboards/lets_split/rev1/info.json index 3c9cea5e5e..6f00161cd5 100644 --- a/keyboards/lets_split/rev1/info.json +++ b/keyboards/lets_split/rev1/info.json @@ -14,6 +14,9 @@ "split": { "soft_serial_pin": "D0" }, + "rgblight": { + "led_count": 16 + }, "ws2812": { "pin": "D3" }, diff --git a/keyboards/lets_split/rev2/config.h b/keyboards/lets_split/rev2/config.h index a30fed6078..0b8941e776 100644 --- a/keyboards/lets_split/rev2/config.h +++ b/keyboards/lets_split/rev2/config.h @@ -23,8 +23,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. /* Locking resynchronize hack */ #define LOCKING_RESYNC_ENABLE -#define RGBLED_NUM 12 // Number of LEDs - /* * Feature disable options * These options are also useful to firmware size reduction. diff --git a/keyboards/lets_split/rev2/info.json b/keyboards/lets_split/rev2/info.json index d25e6de611..8c6d622732 100644 --- a/keyboards/lets_split/rev2/info.json +++ b/keyboards/lets_split/rev2/info.json @@ -14,6 +14,9 @@ "split": { "soft_serial_pin": "D0" }, + "rgblight": { + "led_count": 12 + }, "ws2812": { "pin": "D3" }, diff --git a/keyboards/lets_split/sockets/config.h b/keyboards/lets_split/sockets/config.h index 3655ec19c5..dee5c458b2 100644 --- a/keyboards/lets_split/sockets/config.h +++ b/keyboards/lets_split/sockets/config.h @@ -18,8 +18,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #pragma once -#define RGBLED_NUM 12 // Number of LEDs - /* Audio settings */ #ifdef AUDIO_ENABLE #define AUDIO_PIN C6 // Define this to enable the buzzer diff --git a/keyboards/lets_split/sockets/info.json b/keyboards/lets_split/sockets/info.json index cf716c0507..76972243dc 100644 --- a/keyboards/lets_split/sockets/info.json +++ b/keyboards/lets_split/sockets/info.json @@ -14,6 +14,9 @@ "split": { "soft_serial_pin": "D0" }, + "rgblight": { + "led_count": 12 + }, "ws2812": { "pin": "D4" }, diff --git a/keyboards/lfkeyboards/lfk65_hs/config.h b/keyboards/lfkeyboards/lfk65_hs/config.h index ae682e447f..a1f9493845 100644 --- a/keyboards/lfkeyboards/lfk65_hs/config.h +++ b/keyboards/lfkeyboards/lfk65_hs/config.h @@ -1,10 +1,7 @@ #pragma once -#define RGBLED_NUM 20 // Number of LEDs - #define BACKLIGHT_PWM_MAP {8, 16, 40, 55, 70, 128, 200, 255} -#define RGBLED_NUM 20 // Number of LEDs #define RGBLIGHT_EFFECT_BREATHING #define RGBLIGHT_EFFECT_RAINBOW_MOOD #define RGBLIGHT_EFFECT_RAINBOW_SWIRL @@ -15,9 +12,6 @@ #define RGBLIGHT_EFFECT_RGB_TEST #define RGBLIGHT_EFFECT_ALTERNATING #define RGBLIGHT_EFFECT_TWINKLE -#define RGBLIGHT_HUE_STEP 10 -#define RGBLIGHT_SAT_STEP 17 -#define RGBLIGHT_VAL_STEP 17 /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ #define LOCKING_SUPPORT_ENABLE diff --git a/keyboards/lfkeyboards/lfk65_hs/info.json b/keyboards/lfkeyboards/lfk65_hs/info.json index 894a009583..2fd13d1679 100644 --- a/keyboards/lfkeyboards/lfk65_hs/info.json +++ b/keyboards/lfkeyboards/lfk65_hs/info.json @@ -16,6 +16,10 @@ "backlight": { "levels": 8 }, + "rgblight": { + "hue_steps": 10, + "led_count": 20 + }, "ws2812": { "pin": "C7" }, diff --git a/keyboards/lfkeyboards/lfk78/config.h b/keyboards/lfkeyboards/lfk78/config.h index 5748d29987..39c4294aa5 100644 --- a/keyboards/lfkeyboards/lfk78/config.h +++ b/keyboards/lfkeyboards/lfk78/config.h @@ -19,14 +19,9 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #define BACKLIGHT_PWM_MAP { 8, 16, 40, 55, 70, 128, 200, 255 } -#define TAPPING_TERM 200 - #define AUDIO_PIN C6 #define AUDIO_VOICES -# define RGBLIGHT_HUE_STEP 10 -# define RGBLIGHT_SAT_STEP 17 -# define RGBLIGHT_VAL_STEP 17 # define RGBLIGHT_EFFECT_BREATHING # define RGBLIGHT_EFFECT_RAINBOW_MOOD # define RGBLIGHT_EFFECT_RAINBOW_SWIRL diff --git a/keyboards/lfkeyboards/lfk78/revb/config.h b/keyboards/lfkeyboards/lfk78/revb/config.h deleted file mode 100644 index 377ea21123..0000000000 --- a/keyboards/lfkeyboards/lfk78/revb/config.h +++ /dev/null @@ -1,3 +0,0 @@ -#pragma once - -#define RGBLED_NUM 31 diff --git a/keyboards/lfkeyboards/lfk78/revb/info.json b/keyboards/lfkeyboards/lfk78/revb/info.json index 92662bacc7..bee0a0305b 100644 --- a/keyboards/lfkeyboards/lfk78/revb/info.json +++ b/keyboards/lfkeyboards/lfk78/revb/info.json @@ -17,6 +17,10 @@ "driver": "custom", "levels": 8 }, + "rgblight": { + "hue_steps": 10, + "led_count": 31 + }, "ws2812": { "pin": "C7" }, diff --git a/keyboards/lfkeyboards/lfk78/revc/config.h b/keyboards/lfkeyboards/lfk78/revc/config.h deleted file mode 100644 index 78343dc888..0000000000 --- a/keyboards/lfkeyboards/lfk78/revc/config.h +++ /dev/null @@ -1,3 +0,0 @@ -#pragma once - -#define RGBLED_NUM 27 diff --git a/keyboards/lfkeyboards/lfk78/revc/info.json b/keyboards/lfkeyboards/lfk78/revc/info.json index 830205c584..a0f3327dda 100644 --- a/keyboards/lfkeyboards/lfk78/revc/info.json +++ b/keyboards/lfkeyboards/lfk78/revc/info.json @@ -17,6 +17,10 @@ "driver": "custom", "levels": 8 }, + "rgblight": { + "hue_steps": 10, + "led_count": 27 + }, "ws2812": { "pin": "C7" }, diff --git a/keyboards/lfkeyboards/lfk78/revj/config.h b/keyboards/lfkeyboards/lfk78/revj/config.h deleted file mode 100644 index 78343dc888..0000000000 --- a/keyboards/lfkeyboards/lfk78/revj/config.h +++ /dev/null @@ -1,3 +0,0 @@ -#pragma once - -#define RGBLED_NUM 27 diff --git a/keyboards/lfkeyboards/lfk78/revj/info.json b/keyboards/lfkeyboards/lfk78/revj/info.json index 8f9198b089..3bfbcc147a 100644 --- a/keyboards/lfkeyboards/lfk78/revj/info.json +++ b/keyboards/lfkeyboards/lfk78/revj/info.json @@ -17,6 +17,10 @@ "driver": "custom", "levels": 8 }, + "rgblight": { + "hue_steps": 10, + "led_count": 27 + }, "ws2812": { "pin": "C7" }, diff --git a/keyboards/lfkeyboards/lfk87/config.h b/keyboards/lfkeyboards/lfk87/config.h index 3a8f16e0fd..2fa80e59d2 100644 --- a/keyboards/lfkeyboards/lfk87/config.h +++ b/keyboards/lfkeyboards/lfk87/config.h @@ -32,11 +32,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #define RGBLIGHT_EFFECT_RGB_TEST #define RGBLIGHT_EFFECT_ALTERNATING #define RGBLIGHT_EFFECT_TWINKLE -#define RGBLIGHT_HUE_STEP 10 -#define RGBLIGHT_SAT_STEP 17 -#define RGBLIGHT_VAL_STEP 17 - -#define TAPPING_TERM 200 /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ #define LOCKING_SUPPORT_ENABLE diff --git a/keyboards/lfkeyboards/lfk87/reva/info.json b/keyboards/lfkeyboards/lfk87/reva/info.json index 457f3602ab..dfda50bc4d 100644 --- a/keyboards/lfkeyboards/lfk87/reva/info.json +++ b/keyboards/lfkeyboards/lfk87/reva/info.json @@ -7,6 +7,7 @@ }, "diode_direction": "COL2ROW", "rgblight": { + "hue_steps": 10, "led_count": 25 }, "layouts": { diff --git a/keyboards/lfkeyboards/lfk87/revc/info.json b/keyboards/lfkeyboards/lfk87/revc/info.json index 7d18e71197..239c9f587b 100644 --- a/keyboards/lfkeyboards/lfk87/revc/info.json +++ b/keyboards/lfkeyboards/lfk87/revc/info.json @@ -7,6 +7,7 @@ }, "diode_direction": "COL2ROW", "rgblight": { + "hue_steps": 10, "led_count": 24 }, "layouts": { diff --git a/keyboards/lfkeyboards/lfkpad/config.h b/keyboards/lfkeyboards/lfkpad/config.h index 5393e47b39..06338d2a2d 100644 --- a/keyboards/lfkeyboards/lfkpad/config.h +++ b/keyboards/lfkeyboards/lfkpad/config.h @@ -17,10 +17,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #pragma once -# define RGBLED_NUM 28 -# define RGBLIGHT_HUE_STEP 10 -# define RGBLIGHT_SAT_STEP 17 -# define RGBLIGHT_VAL_STEP 17 # define RGBLIGHT_EFFECT_BREATHING # define RGBLIGHT_EFFECT_RAINBOW_MOOD # define RGBLIGHT_EFFECT_RAINBOW_SWIRL @@ -32,8 +28,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. # define RGBLIGHT_EFFECT_ALTERNATING # define RGBLIGHT_EFFECT_TWINKLE -#define TAPPING_TERM 200 - /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ #define LOCKING_SUPPORT_ENABLE /* Locking resynchronize hack */ diff --git a/keyboards/lfkeyboards/lfkpad/info.json b/keyboards/lfkeyboards/lfkpad/info.json index d4abb0abdd..5a9ee2bdaa 100644 --- a/keyboards/lfkeyboards/lfkpad/info.json +++ b/keyboards/lfkeyboards/lfkpad/info.json @@ -8,6 +8,10 @@ "pid": "0x3231", "device_version": "0.0.1" }, + "rgblight": { + "hue_steps": 10, + "led_count": 28 + }, "ws2812": { "pin": "C7" }, diff --git a/keyboards/lfkeyboards/mini1800/config.h b/keyboards/lfkeyboards/mini1800/config.h index c367ad95c3..2fa80e59d2 100644 --- a/keyboards/lfkeyboards/mini1800/config.h +++ b/keyboards/lfkeyboards/mini1800/config.h @@ -17,8 +17,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #pragma once - #define RGBLED_NUM 26 // Number of LEDs - #define AUDIO_VOICES #define AUDIO_PIN C6 @@ -34,11 +32,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #define RGBLIGHT_EFFECT_RGB_TEST #define RGBLIGHT_EFFECT_ALTERNATING #define RGBLIGHT_EFFECT_TWINKLE -#define RGBLIGHT_HUE_STEP 10 -#define RGBLIGHT_SAT_STEP 17 -#define RGBLIGHT_VAL_STEP 17 - -#define TAPPING_TERM 200 /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ #define LOCKING_SUPPORT_ENABLE diff --git a/keyboards/lfkeyboards/mini1800/info.json b/keyboards/lfkeyboards/mini1800/info.json index cf1cc7764b..5d877ea6fd 100644 --- a/keyboards/lfkeyboards/mini1800/info.json +++ b/keyboards/lfkeyboards/mini1800/info.json @@ -17,6 +17,10 @@ "driver": "custom", "levels": 10 }, + "rgblight": { + "hue_steps": 10, + "led_count": 26 + }, "ws2812": { "pin": "F4" }, diff --git a/keyboards/lfkeyboards/smk65/revb/config.h b/keyboards/lfkeyboards/smk65/revb/config.h index af7f6b17b8..46949a3d96 100644 --- a/keyboards/lfkeyboards/smk65/revb/config.h +++ b/keyboards/lfkeyboards/smk65/revb/config.h @@ -24,7 +24,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #define DIODE_DIRECTION COL2ROW #define MATRIX_ROW_PINS {D6, D7, E0, C3, C4} #define MATRIX_COL_PINS {F2, C5, E5, E4, B7, B6, B5, B4, B3, B2, B1, B0, E1, C0, C1, C2} -#define RGBLED_NUM 20 // Number of LEDs //RevB only: @@ -33,7 +32,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #define BACKLIGHT_PWM_MAP {8, 16, 40, 55, 70, 128, 200, 255} -#define RGBLED_NUM 20 // Number of LEDs #define RGBLIGHT_EFFECT_BREATHING #define RGBLIGHT_EFFECT_RAINBOW_MOOD #define RGBLIGHT_EFFECT_RAINBOW_SWIRL @@ -44,9 +42,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #define RGBLIGHT_EFFECT_RGB_TEST #define RGBLIGHT_EFFECT_ALTERNATING #define RGBLIGHT_EFFECT_TWINKLE -#define RGBLIGHT_HUE_STEP 10 -#define RGBLIGHT_SAT_STEP 17 -#define RGBLIGHT_VAL_STEP 17 /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ #define LOCKING_SUPPORT_ENABLE diff --git a/keyboards/lfkeyboards/smk65/revb/info.json b/keyboards/lfkeyboards/smk65/revb/info.json index f635133e9a..85c853cba0 100644 --- a/keyboards/lfkeyboards/smk65/revb/info.json +++ b/keyboards/lfkeyboards/smk65/revb/info.json @@ -5,6 +5,10 @@ "backlight": { "levels": 8 }, + "rgblight": { + "hue_steps": 10, + "led_count": 20 + }, "ws2812": { "pin": "C7" }, diff --git a/keyboards/lfkeyboards/smk65/revf/config.h b/keyboards/lfkeyboards/smk65/revf/config.h index 50ce341053..9e32ac9d3f 100644 --- a/keyboards/lfkeyboards/smk65/revf/config.h +++ b/keyboards/lfkeyboards/smk65/revf/config.h @@ -31,8 +31,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. /* COL2ROW, ROW2COL */ #define DIODE_DIRECTION COL2ROW -#define RGBLED_NUM 28 - /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ #define LOCKING_SUPPORT_ENABLE /* Locking resynchronize hack */ diff --git a/keyboards/lfkeyboards/smk65/revf/info.json b/keyboards/lfkeyboards/smk65/revf/info.json index 63e9d0abc7..086e7e38c8 100644 --- a/keyboards/lfkeyboards/smk65/revf/info.json +++ b/keyboards/lfkeyboards/smk65/revf/info.json @@ -4,6 +4,9 @@ }, "processor": "atmega32u4", "bootloader": "halfkay", + "rgblight": { + "led_count": 28 + }, "layouts": { "LAYOUT_65_ansi": { "layout": [ diff --git a/keyboards/lily58/glow_enc/config.h b/keyboards/lily58/glow_enc/config.h deleted file mode 100644 index cf58b0fe45..0000000000 --- a/keyboards/lily58/glow_enc/config.h +++ /dev/null @@ -1,26 +0,0 @@ -/* -Copyright 2012 Jun Wako <wakojun@gmail.com> -Copyright 2015 Jack Humbert -Copyright 2017 F_YUUCHI -Copyright 2020 Ben Roesner (keycapsss.com) - -This program is free software: you can redistribute it and/or modify -it under the terms of the GNU General Public License as published by -the Free Software Foundation, either version 2 of the License, or -(at your option) any later version. - -This program is distributed in the hope that it will be useful, -but WITHOUT ANY WARRANTY; without even the implied warranty of -MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -GNU General Public License for more details. - -You should have received a copy of the GNU General Public License -along with this program. If not, see <http://www.gnu.org/licenses/>. -*/ - -#pragma once - -#define RGBLED_NUM 72 // Number of LEDs - -#define RGBLED_SPLIT { 36, 36 } -#define RGBLIGHT_SPLIT diff --git a/keyboards/lily58/glow_enc/info.json b/keyboards/lily58/glow_enc/info.json index 79358416f5..006cf0aa21 100644 --- a/keyboards/lily58/glow_enc/info.json +++ b/keyboards/lily58/glow_enc/info.json @@ -38,7 +38,9 @@ "pin": "F4" }, "rgblight": { - "max_brightness": 120 + "led_count": 72, + "max_brightness": 120, + "split_count": [36, 36] }, "processor": "atmega32u4", "bootloader": "caterina", diff --git a/keyboards/lily58/light/config.h b/keyboards/lily58/light/config.h deleted file mode 100644 index 88cb95c243..0000000000 --- a/keyboards/lily58/light/config.h +++ /dev/null @@ -1,25 +0,0 @@ -/* -Copyright 2012 Jun Wako <wakojun@gmail.com> -Copyright 2015 Jack Humbert -Copyright 2017 F_YUUCHI -Copyright 2020 Ben Roesner (keycapsss.com) - -This program is free software: you can redistribute it and/or modify -it under the terms of the GNU General Public License as published by -the Free Software Foundation, either version 2 of the License, or -(at your option) any later version. - -This program is distributed in the hope that it will be useful, -but WITHOUT ANY WARRANTY; without even the implied warranty of -MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -GNU General Public License for more details. - -You should have received a copy of the GNU General Public License -along with this program. If not, see <http://www.gnu.org/licenses/>. -*/ - -#pragma once - -#define RGBLED_SPLIT { 35, 35 } -#define RGBLED_NUM 70 -#define RGBLIGHT_SPLIT diff --git a/keyboards/lily58/light/info.json b/keyboards/lily58/light/info.json index 7cca1288a3..1c556e429a 100644 --- a/keyboards/lily58/light/info.json +++ b/keyboards/lily58/light/info.json @@ -39,7 +39,9 @@ "pin": "D3" }, "rgblight": { - "max_brightness": 120 + "led_count": 70, + "max_brightness": 120, + "split_count": [35, 35] }, "processor": "atmega32u4", "bootloader": "caterina", diff --git a/keyboards/lily58/rev1/config.h b/keyboards/lily58/rev1/config.h deleted file mode 100644 index 8e94f9f62b..0000000000 --- a/keyboards/lily58/rev1/config.h +++ /dev/null @@ -1,39 +0,0 @@ -/* -Copyright 2012 Jun Wako <wakojun@gmail.com> -Copyright 2015 Jack Humbert -Copyright 2017 F_YUUCHI - -This program is free software: you can redistribute it and/or modify -it under the terms of the GNU General Public License as published by -the Free Software Foundation, either version 2 of the License, or -(at your option) any later version. - -This program is distributed in the hope that it will be useful, -but WITHOUT ANY WARRANTY; without even the implied warranty of -MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -GNU General Public License for more details. - -You should have received a copy of the GNU General Public License -along with this program. If not, see <http://www.gnu.org/licenses/>. -*/ - -#pragma once - -/* ws2812 RGB LED */ -#define RGBLED_NUM 12 // Number of LEDs - -/* - * Feature disable options - * These options are also useful to firmware size reduction. - */ - -/* disable debug print */ -// #define NO_DEBUG - -/* disable print */ -// #define NO_PRINT - -/* disable action features */ -//#define NO_ACTION_LAYER -//#define NO_ACTION_TAPPING -//#define NO_ACTION_ONESHOT diff --git a/keyboards/lily58/rev1/info.json b/keyboards/lily58/rev1/info.json index a3e89ec3a7..6f341915bf 100644 --- a/keyboards/lily58/rev1/info.json +++ b/keyboards/lily58/rev1/info.json @@ -20,6 +20,9 @@ "enabled": true, "soft_serial_pin": "D2" }, + "rgblight": { + "led_count": 12 + }, "ws2812": { "pin": "D3" }, diff --git a/keyboards/lime/rev1/config.h b/keyboards/lime/rev1/config.h index 6ecfdf3034..ef4f99076d 100644 --- a/keyboards/lime/rev1/config.h +++ b/keyboards/lime/rev1/config.h @@ -16,8 +16,6 @@ #pragma once -#define TAPPING_TERM 100 - /* joystick support */ #ifdef JOYSTICK_ENABLE # define JOYSTICK_AXIS_COUNT 2 @@ -25,8 +23,6 @@ # define JOYSTICK_AXIS_RESOLUTION 8 #endif -#define TAP_CODE_DELAY 10 - #define SPLIT_USB_DETECT #ifdef WPM_ENABLE diff --git a/keyboards/lime/rev1/info.json b/keyboards/lime/rev1/info.json index 215b47e103..13caf33841 100644 --- a/keyboards/lime/rev1/info.json +++ b/keyboards/lime/rev1/info.json @@ -28,6 +28,12 @@ } } }, + "tapping": { + "term": 100 + }, + "qmk": { + "tap_keycode_delay": 10 + }, "processor": "atmega32u4", "bootloader": "caterina", "layouts": { diff --git a/keyboards/linworks/fave104/rules.mk b/keyboards/linworks/fave104/rules.mk index af31ae9eca..d6925994b5 100644 --- a/keyboards/linworks/fave104/rules.mk +++ b/keyboards/linworks/fave104/rules.mk @@ -12,5 +12,3 @@ RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow AUDIO_ENABLE = no # Audio output ENCODER_ENABLE = no -# Enter lower-power sleep mode when on the ChibiOS idle thread -OPT_DEFS += -DCORTEX_ENABLE_WFI_IDLE=TRUE diff --git a/keyboards/linworks/fave65h/config.h b/keyboards/linworks/fave65h/config.h index 2c8d4845b1..3f549797d8 100644 --- a/keyboards/linworks/fave65h/config.h +++ b/keyboards/linworks/fave65h/config.h @@ -18,7 +18,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #pragma once /* Define RGB */ -#define RGBLED_NUM 67 #define RGB_MATRIX_LED_COUNT 67 #ifdef RGB_MATRIX_ENABLE diff --git a/keyboards/linworks/fave87/config.h b/keyboards/linworks/fave87/config.h index c46332b007..948b895548 100644 --- a/keyboards/linworks/fave87/config.h +++ b/keyboards/linworks/fave87/config.h @@ -15,8 +15,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #pragma once /* Underglow */ -#define RGBLED_NUM 40 -#define RGBLIGHT_SLEEP // Turns LEDs off if the PC goes to sleep/shutdown #define RGBLIGHT_EFFECT_BREATHING #define RGBLIGHT_EFFECT_RAINBOW_MOOD #define RGBLIGHT_EFFECT_RAINBOW_SWIRL diff --git a/keyboards/linworks/fave87/info.json b/keyboards/linworks/fave87/info.json index e77af6d10d..937a9e5393 100644 --- a/keyboards/linworks/fave87/info.json +++ b/keyboards/linworks/fave87/info.json @@ -17,6 +17,10 @@ "pin": "B7", "breathing": true }, + "rgblight": { + "led_count": 40, + "sleep": true + }, "ws2812": { "pin": "E2" }, diff --git a/keyboards/linworks/fave87h/config.h b/keyboards/linworks/fave87h/config.h index ef57446100..e84a0ec929 100644 --- a/keyboards/linworks/fave87h/config.h +++ b/keyboards/linworks/fave87h/config.h @@ -18,7 +18,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #pragma once /* Define RGB */ -#define RGBLED_NUM 87 #define RGB_MATRIX_LED_COUNT 87 #ifdef RGB_MATRIX_ENABLE diff --git a/keyboards/linworks/whale75/config.h b/keyboards/linworks/whale75/config.h index e21a6d3974..d12d33bdfd 100644 --- a/keyboards/linworks/whale75/config.h +++ b/keyboards/linworks/whale75/config.h @@ -21,16 +21,12 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. /* Underglow */ #define WS2812_EXTERNAL_PULLUP // This board uses a pull-up + 5 V tolerant GPIO in open drain config ro generate a 5 V signal -#define RGBLED_NUM 18 /* section for PWM WS2812 driver */ #define WS2812_PWM_DRIVER PWMD4 #define WS2812_PWM_CHANNEL 4 #define WS2812_PWM_PAL_MODE 2 #define WS2812_DMA_STREAM STM32_DMA1_STREAM7 #define WS2812_DMA_CHANNEL 7 -#define RGBLIGHT_SLEEP #define RGBLIGHT_EFFECT_BREATHING #define RGBLIGHT_EFFECT_RAINBOW_MOOD #define RGBLIGHT_EFFECT_RAINBOW_SWIRL - -#define TAP_CODE_DELAY 10 diff --git a/keyboards/linworks/whale75/info.json b/keyboards/linworks/whale75/info.json index b08d77e307..d85f17455f 100644 --- a/keyboards/linworks/whale75/info.json +++ b/keyboards/linworks/whale75/info.json @@ -8,6 +8,10 @@ "device_version": "0.0.1", "force_nkro": true }, + "rgblight": { + "led_count": 18, + "sleep": true + }, "ws2812": { "pin": "B9", "driver": "pwm" @@ -22,6 +26,9 @@ {"pin_a": "A15", "pin_b": "A14", "resolution": 2} ] }, + "qmk": { + "tap_keycode_delay": 10 + }, "backlight": { "pin": "A10", "levels": 5, diff --git a/keyboards/linworks/whale75/rules.mk b/keyboards/linworks/whale75/rules.mk index 2fd78a13f1..76b31f0a0a 100644 --- a/keyboards/linworks/whale75/rules.mk +++ b/keyboards/linworks/whale75/rules.mk @@ -12,5 +12,3 @@ RGBLIGHT_ENABLE = yes # Enable keyboard RGB underglow AUDIO_ENABLE = no # Audio output ENCODER_ENABLE = yes -# Enter lower-power sleep mode when on the ChibiOS idle thread -OPT_DEFS += -DCORTEX_ENABLE_WFI_IDLE=TRUE diff --git a/keyboards/littlealby/mute/config.h b/keyboards/littlealby/mute/config.h deleted file mode 100644 index 3a5b0356a9..0000000000 --- a/keyboards/littlealby/mute/config.h +++ /dev/null @@ -1,20 +0,0 @@ -/* Copyright 2019 albybarber - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see <http://www.gnu.org/licenses/>. - */ -#pragma once - -#ifdef RGBLIGHT_ENABLE -#define RGBLED_NUM 1 -#endif diff --git a/keyboards/littlealby/mute/info.json b/keyboards/littlealby/mute/info.json index a6392a76e7..a4a2a5822e 100644 --- a/keyboards/littlealby/mute/info.json +++ b/keyboards/littlealby/mute/info.json @@ -9,6 +9,9 @@ "device_version": "0.0.1", "max_power": 100 }, + "rgblight": { + "led_count": 1 + }, "ws2812": { "pin": "B6" }, diff --git a/keyboards/ll3macorn/bongopad/config.h b/keyboards/ll3macorn/bongopad/config.h index b4d4367f1d..4ee4b5a997 100644 --- a/keyboards/ll3macorn/bongopad/config.h +++ b/keyboards/ll3macorn/bongopad/config.h @@ -2,9 +2,6 @@ // SPDX-License-Identifier: GPL-2.0-or-later #pragma once -/* rgb underglow */ -#define RGBLED_NUM 6 - /* misc */ #define LAYER_STATE_8BIT #define NO_ACTION_TAPPING diff --git a/keyboards/ll3macorn/bongopad/info.json b/keyboards/ll3macorn/bongopad/info.json index 6208b749f9..cde72e5882 100644 --- a/keyboards/ll3macorn/bongopad/info.json +++ b/keyboards/ll3macorn/bongopad/info.json @@ -21,6 +21,9 @@ "bootmagic": { "matrix": [1, 0] }, + "rgblight": { + "led_count": 6 + }, "ws2812": { "pin": "E6" }, diff --git a/keyboards/lm_keyboard/lm60n/config.h b/keyboards/lm_keyboard/lm60n/config.h index e40b0762d3..331a182212 100644 --- a/keyboards/lm_keyboard/lm60n/config.h +++ b/keyboards/lm_keyboard/lm60n/config.h @@ -17,11 +17,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #pragma once - #define RGBLED_NUM 41 - #define RGBLIGHT_HUE_STEP 8 - #define RGBLIGHT_SAT_STEP 8 - #define RGBLIGHT_VAL_STEP 8 - #define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */ #define RGBLIGHT_EFFECT_BREATHING #define RGBLIGHT_EFFECT_RAINBOW_MOOD #define RGBLIGHT_EFFECT_RAINBOW_SWIRL diff --git a/keyboards/lm_keyboard/lm60n/info.json b/keyboards/lm_keyboard/lm60n/info.json index ed8af5bc77..d171c7f597 100644 --- a/keyboards/lm_keyboard/lm60n/info.json +++ b/keyboards/lm_keyboard/lm60n/info.json @@ -17,6 +17,12 @@ "caps_lock": "C7", "num_lock": "B7" }, + "rgblight": { + "saturation_steps": 8, + "brightness_steps": 8, + "led_count": 41, + "sleep": true + }, "ws2812": { "pin": "B0" }, diff --git a/keyboards/loki65/config.h b/keyboards/loki65/config.h index 750a12d64f..04c0356959 100644 --- a/keyboards/loki65/config.h +++ b/keyboards/loki65/config.h @@ -28,10 +28,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #define WS2812_DMA_CHANNEL 5 #define WS2812_BYTE_ORDER WS2812_BYTE_ORDER_RGB -#define RGBLED_NUM 37 -#define RGBLIGHT_HUE_STEP 8 -#define RGBLIGHT_SAT_STEP 8 -#define RGBLIGHT_VAL_STEP 8 #define RGBLIGHT_EFFECT_BREATHING #define RGBLIGHT_EFFECT_RAINBOW_MOOD #define RGBLIGHT_EFFECT_RAINBOW_SWIRL diff --git a/keyboards/loki65/info.json b/keyboards/loki65/info.json index a1a5e3ef06..e0f134c60a 100644 --- a/keyboards/loki65/info.json +++ b/keyboards/loki65/info.json @@ -8,6 +8,11 @@ "pid": "0x4C36", "device_version": "0.0.1" }, + "rgblight": { + "saturation_steps": 8, + "brightness_steps": 8, + "led_count": 37 + }, "ws2812": { "pin": "A9", "driver": "pwm" diff --git a/keyboards/loki65/rules.mk b/keyboards/loki65/rules.mk index 000ee78e21..cc9d7bb3f5 100644 --- a/keyboards/loki65/rules.mk +++ b/keyboards/loki65/rules.mk @@ -1,11 +1,6 @@ # Wildcard to allow APM32 MCU DFU_SUFFIX_ARGS = -v FFFF -p FFFF -# Do not put the microcontroller into power saving mode -# when we get USB suspend event. We want it to keep updating -# backlight effects. -OPT_DEFS += -DCORTEX_ENABLE_WFI_IDLE=TRUE - # Build Options # change yes to no to disable # diff --git a/keyboards/longnald/corin/config.h b/keyboards/longnald/corin/config.h index caafcfd8a1..dc8c6770ae 100644 --- a/keyboards/longnald/corin/config.h +++ b/keyboards/longnald/corin/config.h @@ -18,11 +18,6 @@ #pragma once -# define RGBLED_NUM 64 -# define RGBLIGHT_HUE_STEP 20 -# define RGBLIGHT_SAT_STEP 20 -# define RGBLIGHT_VAL_STEP 40 -# define RGBLIGHT_SLEEP # define RGBLIGHT_EFFECT_BREATHING # define RGBLIGHT_EFFECT_RAINBOW_SWIRL # define RGBLIGHT_EFFECT_SNAKE diff --git a/keyboards/longnald/corin/info.json b/keyboards/longnald/corin/info.json index 52964256bb..644a7a55ee 100644 --- a/keyboards/longnald/corin/info.json +++ b/keyboards/longnald/corin/info.json @@ -12,7 +12,12 @@ "pin": "D3" }, "rgblight": { - "max_brightness": 200 + "hue_steps": 20, + "saturation_steps": 20, + "brightness_steps": 40, + "led_count": 64, + "max_brightness": 200, + "sleep": true }, "matrix_pins": { "cols": ["F7", "F6", "F1", "F5", "B1", "E6", "D4", "B7", "D1", "D2", "D0", "B4", "B6", "C6", "C7"], diff --git a/keyboards/lyso1/lck75/config.h b/keyboards/lyso1/lck75/config.h index ef5df5dd3d..b7ade40289 100644 --- a/keyboards/lyso1/lck75/config.h +++ b/keyboards/lyso1/lck75/config.h @@ -21,8 +21,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. /* Locking resynchronize hack */ #define LOCKING_RESYNC_ENABLE -#define RGBLIGHT_SLEEP - #define OLED_TIMEOUT 10000 #define UNICODE_SELECTED_MODES UNICODE_MODE_WINCOMPOSE, UNICODE_MODE_MACOS, UNICODE_MODE_LINUX @@ -42,6 +40,5 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #endif #define PERMISSIVE_HOLD -#define TAPPING_TERM 200 #define NO_ACTION_ONESHOT diff --git a/keyboards/lz/erghost/config.h b/keyboards/lz/erghost/config.h index 4f298a1af8..49a5cb8b17 100644 --- a/keyboards/lz/erghost/config.h +++ b/keyboards/lz/erghost/config.h @@ -38,11 +38,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #define DIODE_DIRECTION ROW2COL #ifdef RGBLIGHT_ENABLE -#define RGBLED_NUM 28 -#define RGBLIGHT_HUE_STEP 8 -#define RGBLIGHT_SAT_STEP 8 -#define RGBLIGHT_VAL_STEP 8 -#define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */ # define RGBLIGHT_EFFECT_STATIC_LIGHT # define RGBLIGHT_EFFECT_BREATHING # define RGBLIGHT_EFFECT_RAINBOW_MOOD diff --git a/keyboards/lz/erghost/info.json b/keyboards/lz/erghost/info.json index d7e266d134..a5e2d7bf65 100644 --- a/keyboards/lz/erghost/info.json +++ b/keyboards/lz/erghost/info.json @@ -12,6 +12,12 @@ "pin": "B6", "breathing": true }, + "rgblight": { + "saturation_steps": 8, + "brightness_steps": 8, + "led_count": 28, + "sleep": true + }, "ws2812": { "pin": "E2" }, diff --git a/keyboards/m10a/keymaps/gam3cat/keymap.c b/keyboards/m10a/keymaps/gam3cat/keymap.c index bfe30b7981..8860bbd010 100644 --- a/keyboards/m10a/keymaps/gam3cat/keymap.c +++ b/keyboards/m10a/keymaps/gam3cat/keymap.c @@ -110,10 +110,6 @@ void matrix_init_user(void) { #endif } -void matrix_scan_user(void) { - -} - layer_state_t layer_state_set_user(layer_state_t state) { switch (get_highest_layer(state)) { case _L0: @@ -152,7 +148,3 @@ layer_state_t layer_state_set_user(layer_state_t state) { } return state; } - -void led_set_user(uint8_t usb_led) { - -} diff --git a/keyboards/makrosu/config.h b/keyboards/makrosu/config.h index 64f4553f90..2977cd9d40 100644 --- a/keyboards/makrosu/config.h +++ b/keyboards/makrosu/config.h @@ -16,8 +16,6 @@ #pragma once -#define TAP_CODE_DELAY 10 - /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ #define LOCKING_SUPPORT_ENABLE diff --git a/keyboards/makrosu/info.json b/keyboards/makrosu/info.json index 96eaf9fad6..ad6acdb100 100644 --- a/keyboards/makrosu/info.json +++ b/keyboards/makrosu/info.json @@ -18,6 +18,9 @@ {"pin_a": "E6", "pin_b": "D1"} ] }, + "qmk": { + "tap_keycode_delay": 10 + }, "bootmagic": { "matrix": [0, 5] }, diff --git a/keyboards/malevolti/lyra/rev1/config.h b/keyboards/malevolti/lyra/rev1/config.h deleted file mode 100644 index 38a1a09cd3..0000000000 --- a/keyboards/malevolti/lyra/rev1/config.h +++ /dev/null @@ -1,18 +0,0 @@ - /* Copyright 2021 Domanic Calleja - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see <http://www.gnu.org/licenses/>. - */ -#pragma once - -#define TAPPING_TERM 100 diff --git a/keyboards/malevolti/lyra/rev1/info.json b/keyboards/malevolti/lyra/rev1/info.json index 2b7f8fbd71..7a9aa305ac 100644 --- a/keyboards/malevolti/lyra/rev1/info.json +++ b/keyboards/malevolti/lyra/rev1/info.json @@ -16,6 +16,9 @@ "split": { "soft_serial_pin": "D2" }, + "tapping": { + "term": 100 + }, "processor": "atmega32u4", "bootloader": "caterina", "layouts": { diff --git a/keyboards/malevolti/superlyra/rev1/config.h b/keyboards/malevolti/superlyra/rev1/config.h deleted file mode 100644 index cffc2e9ff2..0000000000 --- a/keyboards/malevolti/superlyra/rev1/config.h +++ /dev/null @@ -1,18 +0,0 @@ - /* Copyright 2021 Domanic Calleja - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see <http://www.gnu.org/licenses/>. - */ -#pragma once - -#define TAPPING_TERM 100 diff --git a/keyboards/malevolti/superlyra/rev1/info.json b/keyboards/malevolti/superlyra/rev1/info.json index 59cd50af42..989e6baaa7 100644 --- a/keyboards/malevolti/superlyra/rev1/info.json +++ b/keyboards/malevolti/superlyra/rev1/info.json @@ -8,6 +8,9 @@ "pid": "0x4C53", "device_version": "30.3.1" }, + "tapping": { + "term": 100 + }, "matrix_pins": { "cols": ["D0", "D1", "D2", "D3", "D5", "D4", "D6", "D7", "B4", "B5", "B6", "C6", "C7", "F7", "F6", "F5", "F4", "F1"], "rows": ["B7", "B3", "B2", "B1", "B0"] diff --git a/keyboards/manta60/config.h b/keyboards/manta60/config.h index 918edbdbb0..d1769d9880 100644 --- a/keyboards/manta60/config.h +++ b/keyboards/manta60/config.h @@ -19,11 +19,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #define SELECT_SOFT_SERIAL_SPEED 1 -# define RGBLED_NUM 68 -# define RGBLIGHT_SPLIT -# define RGBLED_SPLIT { 34, 34 } -# define RGBLIGHT_HUE_STEP 8 -# define RGBLIGHT_SAT_STEP 8 # ifndef IOS_DEVICE_ENABLE # define RGBLIGHT_VAL_STEP 16 # define RGBLIGHT_LIMIT_VAL 128 /* The maximum brightness level */ @@ -31,7 +26,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. # define RGBLIGHT_VAL_STEP 4 # define RGBLIGHT_LIMIT_VAL 32 /* The maximum brightness level */ # endif -//# define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */ # define RGBLIGHT_EFFECT_BREATHING # define RGBLIGHT_EFFECT_RAINBOW_MOOD # define RGBLIGHT_EFFECT_RAINBOW_SWIRL diff --git a/keyboards/manta60/info.json b/keyboards/manta60/info.json index ba48f72ad2..dc9e1b2330 100644 --- a/keyboards/manta60/info.json +++ b/keyboards/manta60/info.json @@ -16,6 +16,11 @@ "split": { "soft_serial_pin": "D2" }, + "rgblight": { + "saturation_steps": 8, + "led_count": 68, + "split_count": [34, 34] + }, "ws2812": { "pin": "D3" }, diff --git a/keyboards/manyboard/macro/config.h b/keyboards/manyboard/macro/config.h deleted file mode 100644 index 3927473711..0000000000 --- a/keyboards/manyboard/macro/config.h +++ /dev/null @@ -1,21 +0,0 @@ -/* -Copyright 2020 William Ehman - -This program is free software: you can redistribute it and/or modify -it under the terms of the GNU General Public License as published by -the Free Software Foundation, either version 2 of the License, or -(at your option) any later version. - -This program is distributed in the hope that it will be useful, -but WITHOUT ANY WARRANTY; without even the implied warranty of -MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -GNU General Public License for more details. - -You should have received a copy of the GNU General Public License -along with this program. If not, see <http://www.gnu.org/licenses/>. -*/ - -#pragma once - -/* RGB Pins */ -#define RGBLED_NUM 2 diff --git a/keyboards/manyboard/macro/info.json b/keyboards/manyboard/macro/info.json index 3df9a79430..10218337d9 100644 --- a/keyboards/manyboard/macro/info.json +++ b/keyboards/manyboard/macro/info.json @@ -22,6 +22,7 @@ "pin": "B6" }, "rgblight": { + "led_count": 2, "max_brightness": 10 }, "processor": "atmega32u4", diff --git a/keyboards/maple_computing/6ball/config.h b/keyboards/maple_computing/6ball/config.h index 59679e2753..05d2733f8b 100644 --- a/keyboards/maple_computing/6ball/config.h +++ b/keyboards/maple_computing/6ball/config.h @@ -27,6 +27,3 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #define RGBLIGHT_EFFECT_RGB_TEST #define RGBLIGHT_EFFECT_ALTERNATING #define RGBLIGHT_EFFECT_TWINKLE -#define RGBLED_NUM 6 // Number of LEDs - -#define TAPPING_TERM 200 diff --git a/keyboards/maple_computing/6ball/info.json b/keyboards/maple_computing/6ball/info.json index b799baa28c..27f9ae1807 100644 --- a/keyboards/maple_computing/6ball/info.json +++ b/keyboards/maple_computing/6ball/info.json @@ -8,6 +8,9 @@ "pid": "0x0007", "device_version": "0.0.1" }, + "rgblight": { + "led_count": 6 + }, "ws2812": { "pin": "F7" }, diff --git a/keyboards/maple_computing/launchpad/rev1/config.h b/keyboards/maple_computing/launchpad/rev1/config.h index 7cf73259b4..05d2733f8b 100644 --- a/keyboards/maple_computing/launchpad/rev1/config.h +++ b/keyboards/maple_computing/launchpad/rev1/config.h @@ -17,7 +17,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #pragma once -#define RGBLED_NUM 10 #define RGBLIGHT_EFFECT_BREATHING #define RGBLIGHT_EFFECT_RAINBOW_MOOD #define RGBLIGHT_EFFECT_RAINBOW_SWIRL diff --git a/keyboards/maple_computing/launchpad/rev1/info.json b/keyboards/maple_computing/launchpad/rev1/info.json index 81c23850ec..9e7ec96748 100644 --- a/keyboards/maple_computing/launchpad/rev1/info.json +++ b/keyboards/maple_computing/launchpad/rev1/info.json @@ -8,6 +8,9 @@ "pid": "0x6007", "device_version": "0.0.1" }, + "rgblight": { + "led_count": 10 + }, "ws2812": { "pin": "F6" }, diff --git a/keyboards/maple_computing/lets_split_eh/eh/config.h b/keyboards/maple_computing/lets_split_eh/eh/config.h index c64be02975..ad601d7d36 100644 --- a/keyboards/maple_computing/lets_split_eh/eh/config.h +++ b/keyboards/maple_computing/lets_split_eh/eh/config.h @@ -19,8 +19,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #pragma once /* ws2812 RGB LED */ -#define RGBLED_NUM 12 // Number of LEDs (each hand) -#define RGBLED_SPLIT { 6, 6 } #define RGBLIGHT_EFFECT_BREATHING #define RGBLIGHT_EFFECT_RAINBOW_MOOD #define RGBLIGHT_EFFECT_RAINBOW_SWIRL diff --git a/keyboards/maple_computing/lets_split_eh/eh/info.json b/keyboards/maple_computing/lets_split_eh/eh/info.json index 1908f56eeb..5df74d73b6 100644 --- a/keyboards/maple_computing/lets_split_eh/eh/info.json +++ b/keyboards/maple_computing/lets_split_eh/eh/info.json @@ -16,6 +16,10 @@ "backlight": { "pin": "B7" }, + "rgblight": { + "led_count": 12, + "split_count": [6, 6] + }, "ws2812": { "pin": "B2" }, diff --git a/keyboards/maple_computing/the_ruler/config.h b/keyboards/maple_computing/the_ruler/config.h index e3b34d1bf0..a2119b413f 100644 --- a/keyboards/maple_computing/the_ruler/config.h +++ b/keyboards/maple_computing/the_ruler/config.h @@ -38,7 +38,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. //#define NO_ACTION_TAPPING //#define NO_ACTION_ONESHOT -#define RGBLED_NUM 1 // Number of LEDs #define RGBLIGHT_EFFECT_BREATHING #define RGBLIGHT_EFFECT_RAINBOW_MOOD #define RGBLIGHT_EFFECT_RAINBOW_SWIRL @@ -49,6 +48,3 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #define RGBLIGHT_EFFECT_RGB_TEST #define RGBLIGHT_EFFECT_ALTERNATING #define RGBLIGHT_EFFECT_TWINKLE -#define RGBLIGHT_HUE_STEP 10 -#define RGBLIGHT_SAT_STEP 17 -#define RGBLIGHT_VAL_STEP 17 diff --git a/keyboards/maple_computing/the_ruler/info.json b/keyboards/maple_computing/the_ruler/info.json index 336d48af4c..86478b7694 100644 --- a/keyboards/maple_computing/the_ruler/info.json +++ b/keyboards/maple_computing/the_ruler/info.json @@ -8,6 +8,10 @@ "pid": "0x6007", "device_version": "0.0.1" }, + "rgblight": { + "hue_steps": 10, + "led_count": 1 + }, "ws2812": { "pin": "E6" }, diff --git a/keyboards/marksard/leftover30/config.h b/keyboards/marksard/leftover30/config.h index 8f87bd4f1a..0b0263f296 100644 --- a/keyboards/marksard/leftover30/config.h +++ b/keyboards/marksard/leftover30/config.h @@ -17,11 +17,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #pragma once - #define RGBLED_NUM 6 - #define RGBLIGHT_HUE_STEP 8 - #define RGBLIGHT_SAT_STEP 8 - #define RGBLIGHT_VAL_STEP 8 - #define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */ #define RGBLIGHT_EFFECT_BREATHING #define RGBLIGHT_EFFECT_RAINBOW_MOOD #define RGBLIGHT_EFFECT_RAINBOW_SWIRL diff --git a/keyboards/marksard/leftover30/info.json b/keyboards/marksard/leftover30/info.json index 44e8b9bca5..cc11b5ba60 100644 --- a/keyboards/marksard/leftover30/info.json +++ b/keyboards/marksard/leftover30/info.json @@ -18,6 +18,12 @@ {"pin_a": "F4", "pin_b": "F5"} ] }, + "rgblight": { + "saturation_steps": 8, + "brightness_steps": 8, + "led_count": 6, + "sleep": true + }, "ws2812": { "pin": "D3" }, diff --git a/keyboards/marksard/rhymestone/rev1/config.h b/keyboards/marksard/rhymestone/rev1/config.h index d3250461b2..76fd9095fc 100644 --- a/keyboards/marksard/rhymestone/rev1/config.h +++ b/keyboards/marksard/rhymestone/rev1/config.h @@ -18,12 +18,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #pragma once #ifdef RGBLIGHT_ENABLE - #define RGBLED_NUM 40 - #define RGBLED_SPLIT {20, 20} - #define RGBLIGHT_HUE_STEP 8 - #define RGBLIGHT_SAT_STEP 8 - #define RGBLIGHT_VAL_STEP 8 - #define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */ // #define RGBLIGHT_EFFECT_BREATHING #define RGBLIGHT_EFFECT_RAINBOW_MOOD #define RGBLIGHT_EFFECT_RAINBOW_SWIRL @@ -36,18 +30,13 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #endif #ifdef RGB_MATRIX_ENABLE - #define RGBLED_NUM 40 // Number of LEDs - #define RGB_MATRIX_LED_COUNT RGBLED_NUM + #define RGB_MATRIX_LED_COUNT 40 #define RGB_MATRIX_KEYPRESSES // reacts to keypresses // #define RGB_MATRIX_KEYRELEASES // reacts to keyreleases (instead of keypresses) #define RGB_DISABLE_WHEN_USB_SUSPENDED // turn off effects when suspended // #define RGB_MATRIX_LED_PROCESS_LIMIT (RGB_MATRIX_LED_COUNT + 4) / 5 // limits the number of LEDs to process in an animation per task run (increases keyboard responsiveness) // #define RGB_MATRIX_LED_FLUSH_LIMIT 16 // limits in milliseconds how frequently an animation will update the LEDs. 16 (16ms) is equivalent to limiting to 60fps (increases keyboard responsiveness) #define RGB_MATRIX_MAXIMUM_BRIGHTNESS 150 // limits maximum brightness of LEDs to 200 out of 255. If not defined maximum brightness is set to 255 - #define RGB_MATRIX_HUE_STEP 8 - #define RGB_MATRIX_SAT_STEP 8 - #define RGB_MATRIX_VAL_STEP 8 - #define RGB_MATRIX_SPD_STEP 10 // #undef ENABLE_RGB_MATRIX_ALPHAS_MODS // #undef ENABLE_RGB_MATRIX_GRADIENT_UP_DOWN diff --git a/keyboards/marksard/rhymestone/rev1/info.json b/keyboards/marksard/rhymestone/rev1/info.json index fc4ee548d1..ba13c35b88 100644 --- a/keyboards/marksard/rhymestone/rev1/info.json +++ b/keyboards/marksard/rhymestone/rev1/info.json @@ -9,7 +9,10 @@ "device_version": "0.2.0" }, "rgb_matrix": { - "driver": "WS2812" + "driver": "WS2812", + "sat_steps": 8, + "val_steps": 8, + "speed_steps": 10 }, "matrix_pins": { "cols": ["D4", "C6", "D7", "E6", "B4"], @@ -23,7 +26,12 @@ "pin": "D3" }, "rgblight": { - "max_brightness": 150 + "saturation_steps": 8, + "brightness_steps": 8, + "led_count": 40, + "max_brightness": 150, + "sleep": true, + "split_count": [20, 20] }, "processor": "atmega32u4", "bootloader": "caterina", diff --git a/keyboards/marksard/treadstone32/lite/config.h b/keyboards/marksard/treadstone32/lite/config.h index 22435108df..a9f15c0db9 100644 --- a/keyboards/marksard/treadstone32/lite/config.h +++ b/keyboards/marksard/treadstone32/lite/config.h @@ -17,7 +17,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #pragma once - #define RGBLED_NUM 6 #ifndef IOS_DEVICE_ENABLE #define RGBLIGHT_LIMIT_VAL 255 /* The maximum brightness level */ #define RGBLIGHT_VAL_STEP 8 @@ -25,9 +24,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #define RGBLIGHT_LIMIT_VAL 50 #define RGBLIGHT_VAL_STEP 4 #endif - #define RGBLIGHT_HUE_STEP 8 - #define RGBLIGHT_SAT_STEP 8 - #define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */ // #define RGBLIGHT_EFFECT_BREATHING #define RGBLIGHT_EFFECT_RAINBOW_MOOD #define RGBLIGHT_EFFECT_RAINBOW_SWIRL diff --git a/keyboards/marksard/treadstone32/lite/info.json b/keyboards/marksard/treadstone32/lite/info.json index 878b4db2ac..07df01674a 100644 --- a/keyboards/marksard/treadstone32/lite/info.json +++ b/keyboards/marksard/treadstone32/lite/info.json @@ -3,6 +3,11 @@ "usb": { "device_version": "0.1.5" }, + "rgblight": { + "saturation_steps": 8, + "led_count": 6, + "sleep": true + }, "ws2812": { "pin": "D3" }, diff --git a/keyboards/marksard/treadstone32/rev1/config.h b/keyboards/marksard/treadstone32/rev1/config.h index 1f3a9ec168..0a6c395aa5 100644 --- a/keyboards/marksard/treadstone32/rev1/config.h +++ b/keyboards/marksard/treadstone32/rev1/config.h @@ -17,7 +17,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #pragma once - #define RGBLED_NUM 6 #ifndef IOS_DEVICE_ENABLE #define RGBLIGHT_LIMIT_VAL 255 /* The maximum brightness level */ #define RGBLIGHT_VAL_STEP 8 @@ -25,9 +24,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #define RGBLIGHT_LIMIT_VAL 50 #define RGBLIGHT_VAL_STEP 4 #endif - #define RGBLIGHT_HUE_STEP 8 - #define RGBLIGHT_SAT_STEP 8 - #define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */ // #define RGBLIGHT_EFFECT_BREATHING #define RGBLIGHT_EFFECT_RAINBOW_MOOD #define RGBLIGHT_EFFECT_RAINBOW_SWIRL diff --git a/keyboards/marksard/treadstone32/rev1/info.json b/keyboards/marksard/treadstone32/rev1/info.json index 00538f7e8a..17f9580af4 100644 --- a/keyboards/marksard/treadstone32/rev1/info.json +++ b/keyboards/marksard/treadstone32/rev1/info.json @@ -3,6 +3,11 @@ "usb": { "device_version": "0.1.0" }, + "rgblight": { + "saturation_steps": 8, + "led_count": 6, + "sleep": true + }, "ws2812": { "pin": "D3" }, diff --git a/keyboards/marksard/treadstone48/common/oled_helper.c b/keyboards/marksard/treadstone48/common/oled_helper.c index c3c8f23cbc..e9a8cf564a 100644 --- a/keyboards/marksard/treadstone48/common/oled_helper.c +++ b/keyboards/marksard/treadstone48/common/oled_helper.c @@ -43,10 +43,10 @@ void render_key_status(void) { static char lock_buf[24] = "Lock state ready.\n"; void update_lock_status(void) { - uint8_t leds = host_keyboard_leds(); - char *num_lock = (leds & (1<<USB_LED_NUM_LOCK)) ? "Num" : ""; - char *caps_lock = (leds & (1<<USB_LED_CAPS_LOCK)) ? "Caps" : ""; - char *scrl_lock = (leds & (1<<USB_LED_SCROLL_LOCK)) ? "Scrn" : ""; + led_t led_state = host_keyboard_led_state(); + char *num_lock = led_state.num_lock ? "Num" : ""; + char *caps_lock = led_state.caps_lock ? "Caps" : ""; + char *scrl_lock = led_state.scroll_lock ? "Scrn" : ""; snprintf(lock_buf, sizeof(lock_buf) - 1, "Lock:%s %s %s\n", num_lock, caps_lock, scrl_lock); } diff --git a/keyboards/marksard/treadstone48/rev1/config.h b/keyboards/marksard/treadstone48/rev1/config.h index 63ec196632..be5e67cad6 100644 --- a/keyboards/marksard/treadstone48/rev1/config.h +++ b/keyboards/marksard/treadstone48/rev1/config.h @@ -24,10 +24,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #define RGBLED_NUM 32 #define RGBLED_SPLIT {12, 20} #endif - #define RGBLIGHT_HUE_STEP 8 - #define RGBLIGHT_SAT_STEP 8 - #define RGBLIGHT_VAL_STEP 8 - #define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */ // #define RGBLIGHT_EFFECT_BREATHING #define RGBLIGHT_EFFECT_RAINBOW_MOOD #define RGBLIGHT_EFFECT_RAINBOW_SWIRL diff --git a/keyboards/marksard/treadstone48/rev1/info.json b/keyboards/marksard/treadstone48/rev1/info.json index f4dfc35ec1..ed9e4f8414 100644 --- a/keyboards/marksard/treadstone48/rev1/info.json +++ b/keyboards/marksard/treadstone48/rev1/info.json @@ -20,7 +20,10 @@ "pin": "D3" }, "rgblight": { - "max_brightness": 180 + "saturation_steps": 8, + "brightness_steps": 8, + "max_brightness": 180, + "sleep": true }, "processor": "atmega32u4", "bootloader": "caterina", diff --git a/keyboards/marksard/treadstone48/rev2/config.h b/keyboards/marksard/treadstone48/rev2/config.h index 4335ea0670..7dba6c39c1 100644 --- a/keyboards/marksard/treadstone48/rev2/config.h +++ b/keyboards/marksard/treadstone48/rev2/config.h @@ -17,11 +17,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #pragma once - #define RGBLED_NUM 12 - #define RGBLIGHT_HUE_STEP 8 - #define RGBLIGHT_SAT_STEP 8 - #define RGBLIGHT_VAL_STEP 8 - #define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */ // #define RGBLIGHT_EFFECT_BREATHING #define RGBLIGHT_EFFECT_RAINBOW_MOOD #define RGBLIGHT_EFFECT_RAINBOW_SWIRL diff --git a/keyboards/marksard/treadstone48/rev2/info.json b/keyboards/marksard/treadstone48/rev2/info.json index 6e39235dc1..e4e4a3920f 100644 --- a/keyboards/marksard/treadstone48/rev2/info.json +++ b/keyboards/marksard/treadstone48/rev2/info.json @@ -12,7 +12,11 @@ "pin": "D3" }, "rgblight": { - "max_brightness": 220 + "saturation_steps": 8, + "brightness_steps": 8, + "led_count": 12, + "max_brightness": 220, + "sleep": true }, "matrix_pins": { "cols": ["D4", "C6", "D7", "E6", "B4", "B5"], diff --git a/keyboards/massdrop/alt/keymaps/charlesrocket/keymap.c b/keyboards/massdrop/alt/keymaps/charlesrocket/keymap.c index edd906deb5..8df4376806 100644 --- a/keyboards/massdrop/alt/keymaps/charlesrocket/keymap.c +++ b/keyboards/massdrop/alt/keymaps/charlesrocket/keymap.c @@ -65,10 +65,10 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { _______, LAG_SWP, LAG_NRM, _______, _______, TG(3), _______, _______, _______ ), [3] = LAYOUT( - XP(0,1), XP(2,3), XP(4,5), XP(6,7), XP(8,9), XP(10,11), XP(12,13), XP(14,15), XP(16,17), XP(18,19), XP(20,21), XP(22,23), XP(24,25), _______, _______, - _______, KC_QUES, XP(27,28), XP(29,31), X(32), XP(33,34), X(35), X(36), XP(37,38), XP(39,40), XP(41,42), XP(43,44), XP(45,46), _______, _______, - _______, XP(47,48), X(49), X(50), KC_UNDS, XP(52,5), XP(53,54), XP(55,56), KC_QUOT, XP(59,60), XP(61,62), XP(63,64), _______, _______, - _______, XP(65,66), X(67), XP(68,69), X(70), X(71), X(72), X(73), KC_PIPE, XP(75,76), X(77), XP(78,79), _______, _______, + UP(0,1), UP(2,3), UP(4,5), UP(6,7), UP(8,9), UP(10,11), UP(12,13), UP(14,15), UP(16,17), UP(18,19), UP(20,21), UP(22,23), UP(24,25), _______, _______, + _______, KC_QUES, UP(27,28), UP(29,31), UM(32), UP(33,34), UM(35), UM(36), UP(37,38), UP(39,40), UP(41,42), UP(43,44), UP(45,46), _______, _______, + _______, UP(47,48), UM(49), UM(50), KC_UNDS, UP(52,5), UP(53,54), UP(55,56), KC_QUOT, UP(59,60), UP(61,62), UP(63,64), _______, _______, + _______, UP(65,66), UM(67), UP(68,69), UM(70), UM(71), UM(72), UM(73), KC_PIPE, UP(75,76), UM(77), UP(78,79), _______, _______, _______, _______, _______, _______, _______, TG(3), _______, _______, _______ ), }; diff --git a/keyboards/massdrop/alt/keymaps/jdelkins_ss/keymap.c b/keyboards/massdrop/alt/keymaps/jdelkins_ss/keymap.c index 51772f1fa3..c974fb9e2b 100644 --- a/keyboards/massdrop/alt/keymaps/jdelkins_ss/keymap.c +++ b/keyboards/massdrop/alt/keymaps/jdelkins_ss/keymap.c @@ -26,7 +26,6 @@ uint16_t rgb_idle_seconds = 0; uint16_t rgb_timer; uint8_t save_layer; -#define NUMLOCK_ON (host_keyboard_leds() & (1<<USB_LED_NUM_LOCK)) #define MODS_SHIFT (get_mods() & MOD_MASK_SHIFT) #define MODS_CTRL (get_mods() & MOD_MASK_CTRL) @@ -143,7 +142,7 @@ static void set_rgb_layer(int layer) { void matrix_init_keymap(void) { set_rgb_layer(_QWERTY); // force numlock on upon startup - if (!NUMLOCK_ON) { + if (!host_keyboard_led_state().num_lock) { tap_code(KC_NUM_LOCK); } }; diff --git a/keyboards/matrix/abelx/config.h b/keyboards/matrix/abelx/config.h index a1eaecf36e..7f6793b979 100644 --- a/keyboards/matrix/abelx/config.h +++ b/keyboards/matrix/abelx/config.h @@ -90,7 +90,6 @@ // rgb light setting -#define RGBLED_NUM 9 #define RGBLIGHT_EFFECT_BREATHING #define RGBLIGHT_EFFECT_RAINBOW_MOOD #define RGBLIGHT_EFFECT_RAINBOW_SWIRL diff --git a/keyboards/matrix/abelx/info.json b/keyboards/matrix/abelx/info.json index 60a272dc1f..f020f429d6 100644 --- a/keyboards/matrix/abelx/info.json +++ b/keyboards/matrix/abelx/info.json @@ -8,6 +8,9 @@ "pid": "0xAB87", "device_version": "0.0.1" }, + "rgblight": { + "led_count": 9 + }, "ws2812": { "pin": "B4" }, diff --git a/keyboards/matrix/cain_re/config.h b/keyboards/matrix/cain_re/config.h index 017961460c..9555d0962f 100644 --- a/keyboards/matrix/cain_re/config.h +++ b/keyboards/matrix/cain_re/config.h @@ -30,14 +30,6 @@ #define RGBLIGHT_EFFECT_ALTERNATING #define RGBLIGHT_EFFECT_TWINKLE - -#define RGBLED_NUM 14 -#define RGBLIGHT_HUE_STEP 8 -#define RGBLIGHT_SAT_STEP 8 -#define RGBLIGHT_VAL_STEP 8 -#define RGBLIGHT_SLEEP -#define RGBLIGHT_LED_MAP { 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 0, 1, 2, 3 } - #define CAPS_PIN D3 #define NUM_PIN F7 #define SCROLL_PIN B0 diff --git a/keyboards/matrix/cain_re/info.json b/keyboards/matrix/cain_re/info.json index 5b89ed83ef..f3d0aa4179 100644 --- a/keyboards/matrix/cain_re/info.json +++ b/keyboards/matrix/cain_re/info.json @@ -8,6 +8,13 @@ "pid": "0x0106", "device_version": "0.0.1" }, + "rgblight": { + "saturation_steps": 8, + "brightness_steps": 8, + "led_count": 14, + "sleep": true, + "led_map": [4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 0, 1, 2, 3] + }, "ws2812": { "pin": "E6" }, diff --git a/keyboards/matrix/falcon/config.h b/keyboards/matrix/falcon/config.h index d817e8b6f2..c6a2944a57 100644 --- a/keyboards/matrix/falcon/config.h +++ b/keyboards/matrix/falcon/config.h @@ -27,7 +27,6 @@ //#define NO_PRINT //rgb light setting -#define RGBLED_NUM 4 #define RGBLIGHT_EFFECT_BREATHING #define RGBLIGHT_EFFECT_RAINBOW_MOOD #define RGBLIGHT_EFFECT_RAINBOW_SWIRL @@ -38,9 +37,6 @@ #define RGBLIGHT_EFFECT_RGB_TEST #define RGBLIGHT_EFFECT_ALTERNATING #define RGBLIGHT_EFFECT_TWINKLE -#define RGBLIGHT_HUE_STEP 8 -#define RGBLIGHT_SAT_STEP 8 -#define RGBLIGHT_VAL_STEP 8 //pin setting #define LED_POWER_PIN D5 diff --git a/keyboards/matrix/falcon/info.json b/keyboards/matrix/falcon/info.json index 6c0bb7b085..7032bbf955 100644 --- a/keyboards/matrix/falcon/info.json +++ b/keyboards/matrix/falcon/info.json @@ -16,6 +16,11 @@ "indicators": { "caps_lock": "E2" }, + "rgblight": { + "saturation_steps": 8, + "brightness_steps": 8, + "led_count": 4 + }, "ws2812": { "pin": "D1" }, diff --git a/keyboards/matrix/m12og/rev1/config.h b/keyboards/matrix/m12og/rev1/config.h index f0ad633575..5ed4aa0075 100644 --- a/keyboards/matrix/m12og/rev1/config.h +++ b/keyboards/matrix/m12og/rev1/config.h @@ -42,7 +42,4 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #define RGBLIGHT_EFFECT_ALTERNATING #define RGBLIGHT_EFFECT_TWINKLE - -#define RGBLED_NUM 16 -#define RGBLIGHT_SLEEP #define WS2812_BYTE_ORDER WS2812_BYTE_ORDER_RGB diff --git a/keyboards/matrix/m12og/rev1/info.json b/keyboards/matrix/m12og/rev1/info.json index b74c059008..8187c81539 100644 --- a/keyboards/matrix/m12og/rev1/info.json +++ b/keyboards/matrix/m12og/rev1/info.json @@ -12,6 +12,10 @@ "caps_lock": "B6", "scroll_lock": "B5" }, + "rgblight": { + "led_count": 16, + "sleep": true + }, "ws2812": { "pin": "B8" }, diff --git a/keyboards/matrix/m12og/rev2/config.h b/keyboards/matrix/m12og/rev2/config.h index 7fb34f5001..5804100fb2 100644 --- a/keyboards/matrix/m12og/rev2/config.h +++ b/keyboards/matrix/m12og/rev2/config.h @@ -14,9 +14,4 @@ #define RGBLIGHT_EFFECT_RGB_TEST #define RGBLIGHT_EFFECT_ALTERNATING #define RGBLIGHT_EFFECT_TWINKLE -#define RGBLED_NUM 16 -#define RGBLIGHT_HUE_STEP 8 -#define RGBLIGHT_SAT_STEP 8 -#define RGBLIGHT_VAL_STEP 8 -#define RGBLIGHT_SLEEP #define WS2812_BYTE_ORDER WS2812_BYTE_ORDER_RGB diff --git a/keyboards/matrix/m12og/rev2/info.json b/keyboards/matrix/m12og/rev2/info.json index e6e77ba1ee..de16cb4177 100644 --- a/keyboards/matrix/m12og/rev2/info.json +++ b/keyboards/matrix/m12og/rev2/info.json @@ -8,6 +8,12 @@ "pid": "0x8712", "device_version": "0.0.1" }, + "rgblight": { + "saturation_steps": 8, + "brightness_steps": 8, + "led_count": 16, + "sleep": true + }, "ws2812": { "pin": "B3" }, diff --git a/keyboards/matrix/m20add/config.h b/keyboards/matrix/m20add/config.h index 421773affc..5e301cf1c4 100644 --- a/keyboards/matrix/m20add/config.h +++ b/keyboards/matrix/m20add/config.h @@ -79,7 +79,6 @@ #define I2C1_DUTY_CYCLE FAST_DUTY_CYCLE_2 // rgb light setting -#define RGBLED_NUM 20 #define RGBLIGHT_EFFECT_BREATHING #define RGBLIGHT_EFFECT_RAINBOW_MOOD #define RGBLIGHT_EFFECT_RAINBOW_SWIRL @@ -94,4 +93,4 @@ #define DRIVER_ADDR_1 0b1110100 #define DRIVER_COUNT 1 -#define RGB_MATRIX_LED_COUNT RGBLED_NUM +#define RGB_MATRIX_LED_COUNT 20 diff --git a/keyboards/matrix/m20add/info.json b/keyboards/matrix/m20add/info.json index 7d88bb81f5..25abd25827 100644 --- a/keyboards/matrix/m20add/info.json +++ b/keyboards/matrix/m20add/info.json @@ -8,6 +8,9 @@ "pid": "0x20AD", "device_version": "0.0.1" }, + "rgblight": { + "led_count": 20 + }, "ws2812": { "pin": "B4" }, diff --git a/keyboards/matrix/me/config.h b/keyboards/matrix/me/config.h index 8ee1b57bde..b0c06bed41 100644 --- a/keyboards/matrix/me/config.h +++ b/keyboards/matrix/me/config.h @@ -27,7 +27,6 @@ //#define NO_PRINT //rgb light setting -#define RGBLED_NUM 4 #define RGBLIGHT_EFFECT_BREATHING #define RGBLIGHT_EFFECT_RAINBOW_MOOD #define RGBLIGHT_EFFECT_RAINBOW_SWIRL @@ -38,6 +37,3 @@ #define RGBLIGHT_EFFECT_RGB_TEST #define RGBLIGHT_EFFECT_ALTERNATING #define RGBLIGHT_EFFECT_TWINKLE -#define RGBLIGHT_HUE_STEP 8 -#define RGBLIGHT_SAT_STEP 8 -#define RGBLIGHT_VAL_STEP 8 diff --git a/keyboards/matrix/me/info.json b/keyboards/matrix/me/info.json index 935035317c..5917c66d68 100644 --- a/keyboards/matrix/me/info.json +++ b/keyboards/matrix/me/info.json @@ -17,6 +17,11 @@ "caps_lock": "E6", "scroll_lock": "D2" }, + "rgblight": { + "saturation_steps": 8, + "brightness_steps": 8, + "led_count": 4 + }, "ws2812": { "pin": "E2" }, diff --git a/keyboards/matrix/noah/config.h b/keyboards/matrix/noah/config.h index 5a74ab5206..4a3e4d83c9 100644 --- a/keyboards/matrix/noah/config.h +++ b/keyboards/matrix/noah/config.h @@ -75,7 +75,6 @@ # define ENABLE_RGB_MATRIX_SOLID_MULTISPLASH /* indicator rgb */ -#define RGBLED_NUM 7 #define RGBLIGHT_EFFECT_BREATHING #define RGBLIGHT_EFFECT_RAINBOW_MOOD #define RGBLIGHT_EFFECT_RAINBOW_SWIRL @@ -86,9 +85,3 @@ #define RGBLIGHT_EFFECT_RGB_TEST #define RGBLIGHT_EFFECT_ALTERNATING #define RGBLIGHT_EFFECT_TWINKLE - - -// tapping setting -//#define TAPPING_TERM 200 -//#define RETRO_TAPPING -//#define PERMISSIVE_HOLD diff --git a/keyboards/matrix/noah/info.json b/keyboards/matrix/noah/info.json index 33dedc6bce..67c5fe0221 100644 --- a/keyboards/matrix/noah/info.json +++ b/keyboards/matrix/noah/info.json @@ -8,6 +8,9 @@ "pid": "0x0065", "device_version": "0.0.1" }, + "rgblight": { + "led_count": 7 + }, "ws2812": { "pin": "B1" }, diff --git a/keyboards/matrix/noah/noah.c b/keyboards/matrix/noah/noah.c index 671d272d85..0969998fa9 100644 --- a/keyboards/matrix/noah/noah.c +++ b/keyboards/matrix/noah/noah.c @@ -32,14 +32,14 @@ void rgblight_set(void) { } } if (noah_led_mode) { - uint8_t ind_led = host_keyboard_leds(); - if (IS_LED_ON(ind_led, USB_LED_CAPS_LOCK)) { + led_t led_state = host_keyboard_led_state(); + if (led_state.caps_lock) { noah_leds[0] = led[0]; } - if (IS_LED_ON(ind_led, USB_LED_SCROLL_LOCK)) { + if (led_state.scroll_lock) { noah_leds[1] = led[1]; } - if (IS_LED_ON(ind_led, USB_LED_NUM_LOCK)) { + if (led_state.num_lock) { noah_leds[2] = led[2]; } for (int32_t i = 0; i < 4; i++) { diff --git a/keyboards/maxr1998/pulse4k/config.h b/keyboards/maxr1998/pulse4k/config.h index 0b552acfda..c6cf684b8e 100644 --- a/keyboards/maxr1998/pulse4k/config.h +++ b/keyboards/maxr1998/pulse4k/config.h @@ -31,7 +31,6 @@ #define RGBLIGHT_EFFECT_RGB_TEST #define RGBLIGHT_EFFECT_ALTERNATING #define RGBLIGHT_EFFECT_TWINKLE -#define RGBLED_NUM 2 // number of LEDs /* * Feature disable options diff --git a/keyboards/maxr1998/pulse4k/info.json b/keyboards/maxr1998/pulse4k/info.json index 2d3b6e8a4b..004545cbbf 100644 --- a/keyboards/maxr1998/pulse4k/info.json +++ b/keyboards/maxr1998/pulse4k/info.json @@ -8,6 +8,9 @@ "pid": "0x6060", "device_version": "0.0.1" }, + "rgblight": { + "led_count": 2 + }, "ws2812": { "pin": "F7" }, diff --git a/keyboards/mechanickeys/undead60m/config.h b/keyboards/mechanickeys/undead60m/config.h index 9388d3da68..5135b7049e 100644 --- a/keyboards/mechanickeys/undead60m/config.h +++ b/keyboards/mechanickeys/undead60m/config.h @@ -17,8 +17,6 @@ #pragma once /* RGB Underglow */ - #define RGBLED_NUM 16 - #define RGBLIGHT_SLEEP #define RGBLIGHT_EFFECT_BREATHING #define RGBLIGHT_EFFECT_RAINBOW_MOOD #define RGBLIGHT_EFFECT_RAINBOW_SWIRL diff --git a/keyboards/mechanickeys/undead60m/info.json b/keyboards/mechanickeys/undead60m/info.json index 5fd2c83514..9941c93b12 100644 --- a/keyboards/mechanickeys/undead60m/info.json +++ b/keyboards/mechanickeys/undead60m/info.json @@ -8,6 +8,10 @@ "pid": "0x3C4D", "device_version": "0.0.1" }, + "rgblight": { + "led_count": 16, + "sleep": true + }, "ws2812": { "pin": "F7" }, diff --git a/keyboards/mechbrewery/mb65s/config.h b/keyboards/mechbrewery/mb65s/config.h index 603bf2a949..c2e9967f4e 100644 --- a/keyboards/mechbrewery/mb65s/config.h +++ b/keyboards/mechbrewery/mb65s/config.h @@ -27,8 +27,3 @@ #define RGBLIGHT_EFFECT_RGB_TEST #define RGBLIGHT_EFFECT_ALTERNATING #define RGBLIGHT_EFFECT_TWINKLE -#define RGBLED_NUM 16 -#define RGBLIGHT_HUE_STEP 8 -#define RGBLIGHT_SAT_STEP 8 -#define RGBLIGHT_VAL_STEP 8 -#define RGBLIGHT_SLEEP diff --git a/keyboards/mechbrewery/mb65s/info.json b/keyboards/mechbrewery/mb65s/info.json index f73a11bcd7..cf0cdaa673 100644 --- a/keyboards/mechbrewery/mb65s/info.json +++ b/keyboards/mechbrewery/mb65s/info.json @@ -21,7 +21,11 @@ "pin": "E2" }, "rgblight": { - "max_brightness": 240 + "saturation_steps": 8, + "brightness_steps": 8, + "led_count": 16, + "max_brightness": 240, + "sleep": true }, "processor": "atmega32u4", "bootloader": "atmel-dfu", diff --git a/keyboards/mechkeys/acr60/config.h b/keyboards/mechkeys/acr60/config.h index 8f261b69f2..e60c8a052f 100644 --- a/keyboards/mechkeys/acr60/config.h +++ b/keyboards/mechkeys/acr60/config.h @@ -32,7 +32,3 @@ #define RGBLIGHT_EFFECT_RGB_TEST #define RGBLIGHT_EFFECT_ALTERNATING #define RGBLIGHT_EFFECT_TWINKLE -#define RGBLED_NUM 20 -#define RGBLIGHT_HUE_STEP 8 -#define RGBLIGHT_SAT_STEP 8 -#define RGBLIGHT_VAL_STEP 8 diff --git a/keyboards/mechkeys/acr60/info.json b/keyboards/mechkeys/acr60/info.json index 422b3f6270..0c42991a70 100644 --- a/keyboards/mechkeys/acr60/info.json +++ b/keyboards/mechkeys/acr60/info.json @@ -21,6 +21,11 @@ "caps_lock": "B2", "on_state": 0 }, + "rgblight": { + "saturation_steps": 8, + "brightness_steps": 8, + "led_count": 20 + }, "ws2812": { "pin": "E2" }, diff --git a/keyboards/mechkeys/alu84/config.h b/keyboards/mechkeys/alu84/config.h index 16e5930364..c764ecf521 100755 --- a/keyboards/mechkeys/alu84/config.h +++ b/keyboards/mechkeys/alu84/config.h @@ -17,10 +17,6 @@ #pragma once #if defined(RGBLIGHT_ENABLE) -# define RGBLED_NUM 16 -# define RGBLIGHT_HUE_STEP 10 -# define RGBLIGHT_SAT_STEP 10 -# define RGBLIGHT_VAL_STEP 10 # define RGBLIGHT_EFFECT_BREATHING # define RGBLIGHT_EFFECT_RAINBOW_MOOD # define RGBLIGHT_EFFECT_RAINBOW_SWIRL diff --git a/keyboards/mechkeys/alu84/info.json b/keyboards/mechkeys/alu84/info.json index 5251bc600b..70ceae3dee 100644 --- a/keyboards/mechkeys/alu84/info.json +++ b/keyboards/mechkeys/alu84/info.json @@ -17,6 +17,12 @@ "pin": "B6", "breathing": true }, + "rgblight": { + "hue_steps": 10, + "saturation_steps": 10, + "brightness_steps": 10, + "led_count": 16 + }, "ws2812": { "pin": "E2" }, diff --git a/keyboards/mechkeys/espectro/config.h b/keyboards/mechkeys/espectro/config.h index a7436fb00c..1ab63d5ac5 100755 --- a/keyboards/mechkeys/espectro/config.h +++ b/keyboards/mechkeys/espectro/config.h @@ -22,11 +22,6 @@ /* Locking resynchronize hack */ #define LOCKING_RESYNC_ENABLE -#define RGBLED_NUM 18 -#define RGBLIGHT_HUE_STEP 10 -#define RGBLIGHT_SAT_STEP 10 -#define RGBLIGHT_VAL_STEP 10 - #define RGBLIGHT_EFFECT_BREATHING #define RGBLIGHT_EFFECT_RAINBOW_MOOD #define RGBLIGHT_EFFECT_RAINBOW_SWIRL diff --git a/keyboards/mechkeys/espectro/info.json b/keyboards/mechkeys/espectro/info.json index 40d6710829..68ec51e169 100644 --- a/keyboards/mechkeys/espectro/info.json +++ b/keyboards/mechkeys/espectro/info.json @@ -23,6 +23,12 @@ "scroll_lock": "B1", "on_state": 0 }, + "rgblight": { + "hue_steps": 10, + "saturation_steps": 10, + "brightness_steps": 10, + "led_count": 18 + }, "ws2812": { "pin": "E2" }, diff --git a/keyboards/mechkeys/mechmini/v1/config.h b/keyboards/mechkeys/mechmini/v1/config.h index f76d0f01e1..2e1fefef99 100644 --- a/keyboards/mechkeys/mechmini/v1/config.h +++ b/keyboards/mechkeys/mechmini/v1/config.h @@ -18,7 +18,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #pragma once /* RGB underglow */ -#define RGBLED_NUM 16 #define RGBLIGHT_EFFECT_BREATHING #define RGBLIGHT_EFFECT_RAINBOW_MOOD #define RGBLIGHT_EFFECT_RAINBOW_SWIRL diff --git a/keyboards/mechkeys/mechmini/v1/info.json b/keyboards/mechkeys/mechmini/v1/info.json index eea1d15feb..e8cb6f16bf 100644 --- a/keyboards/mechkeys/mechmini/v1/info.json +++ b/keyboards/mechkeys/mechmini/v1/info.json @@ -16,6 +16,9 @@ "backlight": { "pin": "D4" }, + "rgblight": { + "led_count": 16 + }, "ws2812": { "driver": "i2c" }, diff --git a/keyboards/mechkeys/mechmini/v2/config.h b/keyboards/mechkeys/mechmini/v2/config.h index 9517f6a731..b9e5aae342 100755 --- a/keyboards/mechkeys/mechmini/v2/config.h +++ b/keyboards/mechkeys/mechmini/v2/config.h @@ -31,7 +31,3 @@ #define RGBLIGHT_EFFECT_RGB_TEST #define RGBLIGHT_EFFECT_ALTERNATING #define RGBLIGHT_EFFECT_TWINKLE -#define RGBLED_NUM 14 -#define RGBLIGHT_HUE_STEP 8 -#define RGBLIGHT_SAT_STEP 8 -#define RGBLIGHT_VAL_STEP 8 diff --git a/keyboards/mechkeys/mechmini/v2/info.json b/keyboards/mechkeys/mechmini/v2/info.json index 53f60637f9..36c408d6de 100644 --- a/keyboards/mechkeys/mechmini/v2/info.json +++ b/keyboards/mechkeys/mechmini/v2/info.json @@ -16,6 +16,11 @@ "backlight": { "pin": "B6" }, + "rgblight": { + "saturation_steps": 8, + "brightness_steps": 8, + "led_count": 14 + }, "ws2812": { "pin": "E2" }, diff --git a/keyboards/mechkeys/mk60/config.h b/keyboards/mechkeys/mk60/config.h index 782b3a7381..c43ea48906 100644 --- a/keyboards/mechkeys/mk60/config.h +++ b/keyboards/mechkeys/mk60/config.h @@ -17,11 +17,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #pragma once - #define RGBLED_NUM 12 - #define RGBLIGHT_HUE_STEP 8 - #define RGBLIGHT_SAT_STEP 8 - #define RGBLIGHT_VAL_STEP 8 - #define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */ #define RGBLIGHT_EFFECT_BREATHING #define RGBLIGHT_EFFECT_RAINBOW_MOOD #define RGBLIGHT_EFFECT_RAINBOW_SWIRL diff --git a/keyboards/mechkeys/mk60/info.json b/keyboards/mechkeys/mk60/info.json index ef7658a1e1..58cb635587 100644 --- a/keyboards/mechkeys/mk60/info.json +++ b/keyboards/mechkeys/mk60/info.json @@ -22,6 +22,12 @@ "caps_lock": "B7", "on_state": 0 }, + "rgblight": { + "saturation_steps": 8, + "brightness_steps": 8, + "led_count": 12, + "sleep": true + }, "ws2812": { "pin": "E6" }, diff --git a/keyboards/mechllama/g35/v1/config.h b/keyboards/mechllama/g35/v1/config.h deleted file mode 100644 index 1aee08380c..0000000000 --- a/keyboards/mechllama/g35/v1/config.h +++ /dev/null @@ -1,20 +0,0 @@ -/* -Copyright 2019 Kaylyn Bogle - -This program is free software: you can redistribute it and/or modify -it under the terms of the GNU General Public License as published by -the Free Software Foundation, either version 2 of the License, or -(at your option) any later version. - -This program is distributed in the hope that it will be useful, -but WITHOUT ANY WARRANTY; without even the implied warranty of -MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -GNU General Public License for more details. - -You should have received a copy of the GNU General Public License -along with this program. If not, see <http://www.gnu.org/licenses/>. -*/ - -#pragma once - -#define RGBLED_NUM 41 diff --git a/keyboards/mechllama/g35/v1/info.json b/keyboards/mechllama/g35/v1/info.json index c5d4c69e7b..36d542dc58 100644 --- a/keyboards/mechllama/g35/v1/info.json +++ b/keyboards/mechllama/g35/v1/info.json @@ -6,5 +6,8 @@ "cols": ["D6", "D7", "B4", "B5", "B6", "F0", "D5"], "rows": ["F5", "F6", "F4", "F1", "D4"] }, - "diode_direction": "COL2ROW" + "diode_direction": "COL2ROW", + "rgblight": { + "led_count": 41 + } } diff --git a/keyboards/mechllama/g35/v2/config.h b/keyboards/mechllama/g35/v2/config.h deleted file mode 100644 index 7c15560a1a..0000000000 --- a/keyboards/mechllama/g35/v2/config.h +++ /dev/null @@ -1,20 +0,0 @@ -/* -Copyright 2019 Kaylyn Bogle - -This program is free software: you can redistribute it and/or modify -it under the terms of the GNU General Public License as published by -the Free Software Foundation, either version 2 of the License, or -(at your option) any later version. - -This program is distributed in the hope that it will be useful, -but WITHOUT ANY WARRANTY; without even the implied warranty of -MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -GNU General Public License for more details. - -You should have received a copy of the GNU General Public License -along with this program. If not, see <http://www.gnu.org/licenses/>. -*/ - -#pragma once - -#define RGBLED_NUM 6 diff --git a/keyboards/mechllama/g35/v2/info.json b/keyboards/mechllama/g35/v2/info.json index 563625f428..aa6bab7525 100644 --- a/keyboards/mechllama/g35/v2/info.json +++ b/keyboards/mechllama/g35/v2/info.json @@ -6,5 +6,8 @@ "cols": ["D6", "D7", "B4", "B5", "B6", "F6", "D5"], "rows": ["F5", "F4", "F1", "F0", "D4"] }, - "diode_direction": "COL2ROW" + "diode_direction": "COL2ROW", + "rgblight": { + "led_count": 6 + } } diff --git a/keyboards/mechlovin/adelais/rgb_led/rev2/config.h b/keyboards/mechlovin/adelais/rgb_led/rev2/config.h index 1e549f9a89..088c29a048 100644 --- a/keyboards/mechlovin/adelais/rgb_led/rev2/config.h +++ b/keyboards/mechlovin/adelais/rgb_led/rev2/config.h @@ -1,6 +1,5 @@ #pragma once -#define RGBLED_NUM 23 #define RGBLIGHT_EFFECT_BREATHING #define RGBLIGHT_EFFECT_RAINBOW_MOOD #define RGBLIGHT_EFFECT_RAINBOW_SWIRL @@ -11,9 +10,6 @@ #define RGBLIGHT_EFFECT_RGB_TEST #define RGBLIGHT_EFFECT_ALTERNATING #define RGBLIGHT_EFFECT_TWINKLE -#define RGBLIGHT_HUE_STEP 8 -#define RGBLIGHT_SAT_STEP 8 -#define RGBLIGHT_VAL_STEP 8 //rgb matrix setting // This is a 7-bit address, that gets left-shifted and bit 0 @@ -86,5 +82,3 @@ # define ENABLE_RGB_MATRIX_SOLID_MULTISPLASH #define RGB_MATRIX_DISABLE_KEYCODES - -#define TAP_CODE_DELAY 10 diff --git a/keyboards/mechlovin/adelais/rgb_led/rev2/info.json b/keyboards/mechlovin/adelais/rgb_led/rev2/info.json index 4ac693f894..c7e662c008 100644 --- a/keyboards/mechlovin/adelais/rgb_led/rev2/info.json +++ b/keyboards/mechlovin/adelais/rgb_led/rev2/info.json @@ -16,6 +16,14 @@ {"pin_a": "A4", "pin_b": "A3"} ] }, + "qmk": { + "tap_keycode_delay": 10 + }, + "rgblight": { + "saturation_steps": 8, + "brightness_steps": 8, + "led_count": 23 + }, "ws2812": { "pin": "A15" }, diff --git a/keyboards/mechlovin/adelais/rgb_led/rev3/config.h b/keyboards/mechlovin/adelais/rgb_led/rev3/config.h index c4f801b40d..3c514668d1 100644 --- a/keyboards/mechlovin/adelais/rgb_led/rev3/config.h +++ b/keyboards/mechlovin/adelais/rgb_led/rev3/config.h @@ -20,7 +20,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #ifdef RGBLIGHT_ENABLE #define WS2812_SPI SPID1 // default: SPID1 #define WS2812_SPI_MOSI_PAL_MODE 5 // Pin "alternate function", see the respective datasheet for the appropriate values for your MCU. default: 5 -#define RGBLED_NUM 23 #define RGBLIGHT_EFFECT_BREATHING #define RGBLIGHT_EFFECT_RAINBOW_MOOD #define RGBLIGHT_EFFECT_RAINBOW_SWIRL @@ -31,9 +30,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #define RGBLIGHT_EFFECT_RGB_TEST #define RGBLIGHT_EFFECT_ALTERNATING #define RGBLIGHT_EFFECT_TWINKLE -#define RGBLIGHT_HUE_STEP 8 -#define RGBLIGHT_SAT_STEP 8 -#define RGBLIGHT_VAL_STEP 8 #endif #ifdef RGB_MATRIX_ENABLE @@ -108,5 +104,3 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #define I2C1_DUTY_CYCLE FAST_DUTY_CYCLE_2 #endif - -#define TAP_CODE_DELAY 10 diff --git a/keyboards/mechlovin/adelais/rgb_led/rev3/info.json b/keyboards/mechlovin/adelais/rgb_led/rev3/info.json index d1775ccb83..d745503c27 100644 --- a/keyboards/mechlovin/adelais/rgb_led/rev3/info.json +++ b/keyboards/mechlovin/adelais/rgb_led/rev3/info.json @@ -16,6 +16,9 @@ {"pin_a": "B12", "pin_b": "B13"} ] }, + "qmk": { + "tap_keycode_delay": 10 + }, "processor": "STM32F103", "bootloader": "stm32duino", "indicators": { @@ -23,6 +26,11 @@ "num_lock": "A0", "scroll_lock": "C15" }, + "rgblight": { + "saturation_steps": 8, + "brightness_steps": 8, + "led_count": 23 + }, "ws2812": { "pin": "A7", "driver": "spi" diff --git a/keyboards/mechlovin/adelais/rgb_led/rev3/rules.mk b/keyboards/mechlovin/adelais/rgb_led/rev3/rules.mk index 5664ce6844..e144301381 100644 --- a/keyboards/mechlovin/adelais/rgb_led/rev3/rules.mk +++ b/keyboards/mechlovin/adelais/rgb_led/rev3/rules.mk @@ -6,6 +6,3 @@ RGBLIGHT_ENABLE = yes ENCODER_ENABLE = yes CONSOLE_ENABLE = no # Console for debug COMMAND_ENABLE = no # Commands for debug and configuration - -# Enter lower-power sleep mode when on the ChibiOS idle thread -OPT_DEFS += -DCORTEX_ENABLE_WFI_IDLE=TRUE
\ No newline at end of file diff --git a/keyboards/mechlovin/adelais/standard_led/arm/config.h b/keyboards/mechlovin/adelais/standard_led/arm/config.h index 1c9b61b9df..d7169c0443 100644 --- a/keyboards/mechlovin/adelais/standard_led/arm/config.h +++ b/keyboards/mechlovin/adelais/standard_led/arm/config.h @@ -20,7 +20,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #define BACKLIGHT_PWM_DRIVER PWMD3 #define BACKLIGHT_PWM_CHANNEL 3 -#define RGBLED_NUM 23 #define RGBLIGHT_EFFECT_BREATHING #define RGBLIGHT_EFFECT_RAINBOW_MOOD #define RGBLIGHT_EFFECT_RAINBOW_SWIRL diff --git a/keyboards/mechlovin/adelais/standard_led/arm/info.json b/keyboards/mechlovin/adelais/standard_led/arm/info.json index 9c6bd46a70..c4b97fbd78 100644 --- a/keyboards/mechlovin/adelais/standard_led/arm/info.json +++ b/keyboards/mechlovin/adelais/standard_led/arm/info.json @@ -9,6 +9,9 @@ "pin": "B0", "breathing": true }, + "rgblight": { + "led_count": 23 + }, "ws2812": { "pin": "A7" }, diff --git a/keyboards/mechlovin/adelais/standard_led/arm/rev3/config.h b/keyboards/mechlovin/adelais/standard_led/arm/rev3/config.h deleted file mode 100644 index 254d204038..0000000000 --- a/keyboards/mechlovin/adelais/standard_led/arm/rev3/config.h +++ /dev/null @@ -1,3 +0,0 @@ -#pragma once - -#define TAP_CODE_DELAY 10
\ No newline at end of file diff --git a/keyboards/mechlovin/adelais/standard_led/arm/rev3/info.json b/keyboards/mechlovin/adelais/standard_led/arm/rev3/info.json index a5ebef5b87..46907dc7a9 100644 --- a/keyboards/mechlovin/adelais/standard_led/arm/rev3/info.json +++ b/keyboards/mechlovin/adelais/standard_led/arm/rev3/info.json @@ -9,6 +9,9 @@ {"pin_a": "B7", "pin_b": "B6"} ] }, + "qmk": { + "tap_keycode_delay": 10 + }, "processor": "STM32F303", "board": "QMK_PROTON_C", "bootloader": "stm32-dfu", diff --git a/keyboards/mechlovin/adelais/standard_led/arm/rev4/config.h b/keyboards/mechlovin/adelais/standard_led/arm/rev4/config.h deleted file mode 100644 index 7905be1891..0000000000 --- a/keyboards/mechlovin/adelais/standard_led/arm/rev4/config.h +++ /dev/null @@ -1,19 +0,0 @@ -/* -Copyright 2021 Mechlovin' Studio - -This program is free software: you can redistribute it and/or modify -it under the terms of the GNU General Public License as published by -the Free Software Foundation, either version 2 of the License, or -(at your option) any later version. - -This program is distributed in the hope that it will be useful, -but WITHOUT ANY WARRANTY; without even the implied warranty of -MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -GNU General Public License for more details. - -You should have received a copy of the GNU General Public License -along with this program. If not, see <http://www.gnu.org/licenses/>. -*/ -#pragma once - -#define TAP_CODE_DELAY 10
\ No newline at end of file diff --git a/keyboards/mechlovin/adelais/standard_led/arm/rev4/info.json b/keyboards/mechlovin/adelais/standard_led/arm/rev4/info.json index b6ee0c5b67..f0d10942ad 100644 --- a/keyboards/mechlovin/adelais/standard_led/arm/rev4/info.json +++ b/keyboards/mechlovin/adelais/standard_led/arm/rev4/info.json @@ -9,6 +9,9 @@ {"pin_a": "B7", "pin_b": "B6"} ] }, + "qmk": { + "tap_keycode_delay": 10 + }, "layout_aliases": { "LAYOUT_all": "LAYOUT_alice_split_bs" }, diff --git a/keyboards/mechlovin/adelais/standard_led/avr/rev1/config.h b/keyboards/mechlovin/adelais/standard_led/avr/rev1/config.h index 0e23efaf3a..f1fda9adfc 100644 --- a/keyboards/mechlovin/adelais/standard_led/avr/rev1/config.h +++ b/keyboards/mechlovin/adelais/standard_led/avr/rev1/config.h @@ -31,7 +31,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. /* COL2ROW, ROW2COL*/ #define DIODE_DIRECTION ROW2COL -#define RGBLED_NUM 23 #define RGBLIGHT_EFFECT_BREATHING #define RGBLIGHT_EFFECT_RAINBOW_MOOD #define RGBLIGHT_EFFECT_RAINBOW_SWIRL @@ -42,5 +41,3 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #define RGBLIGHT_EFFECT_RGB_TEST #define RGBLIGHT_EFFECT_ALTERNATING #define RGBLIGHT_EFFECT_TWINKLE - -#define TAP_CODE_DELAY 10 diff --git a/keyboards/mechlovin/adelais/standard_led/avr/rev1/info.json b/keyboards/mechlovin/adelais/standard_led/avr/rev1/info.json index 31de7de957..d7c51465ff 100644 --- a/keyboards/mechlovin/adelais/standard_led/avr/rev1/info.json +++ b/keyboards/mechlovin/adelais/standard_led/avr/rev1/info.json @@ -10,10 +10,16 @@ {"pin_a": "C7", "pin_b": "C6"} ] }, + "qmk": { + "tap_keycode_delay": 10 + }, "backlight": { "pin": "B5", "breathing": true }, + "rgblight": { + "led_count": 23 + }, "ws2812": { "pin": "E2" }, diff --git a/keyboards/mechlovin/delphine/mono_led/config.h b/keyboards/mechlovin/delphine/mono_led/config.h index 61c495c889..8349512ec5 100644 --- a/keyboards/mechlovin/delphine/mono_led/config.h +++ b/keyboards/mechlovin/delphine/mono_led/config.h @@ -2,11 +2,6 @@ #pragma once #ifdef RGBLIGHT_ENABLE -#define RGBLED_NUM 13 -#define RGBLIGHT_HUE_STEP 8 -#define RGBLIGHT_SAT_STEP 8 -#define RGBLIGHT_VAL_STEP 8 -#define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */ #define RGBLIGHT_EFFECT_BREATHING #define RGBLIGHT_EFFECT_RAINBOW_MOOD #define RGBLIGHT_EFFECT_RAINBOW_SWIRL diff --git a/keyboards/mechlovin/delphine/mono_led/info.json b/keyboards/mechlovin/delphine/mono_led/info.json index 7f775f8c36..7e665b3830 100644 --- a/keyboards/mechlovin/delphine/mono_led/info.json +++ b/keyboards/mechlovin/delphine/mono_led/info.json @@ -3,6 +3,12 @@ "pid": "0xDEF1", "device_version": "0.0.1" }, + "rgblight": { + "saturation_steps": 8, + "brightness_steps": 8, + "led_count": 13, + "sleep": true + }, "ws2812": { "pin": "E2" }, diff --git a/keyboards/mechlovin/delphine/rgb_led/config.h b/keyboards/mechlovin/delphine/rgb_led/config.h index 7d9aa447f9..1e79908cd2 100644 --- a/keyboards/mechlovin/delphine/rgb_led/config.h +++ b/keyboards/mechlovin/delphine/rgb_led/config.h @@ -1,11 +1,6 @@ #pragma once #ifdef RGBLIGHT_ENABLE -#define RGBLED_NUM 13 -#define RGBLIGHT_HUE_STEP 8 -#define RGBLIGHT_SAT_STEP 8 -#define RGBLIGHT_VAL_STEP 8 -#define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */ #define RGBLIGHT_EFFECT_BREATHING #define RGBLIGHT_EFFECT_RAINBOW_MOOD #define RGBLIGHT_EFFECT_RAINBOW_SWIRL diff --git a/keyboards/mechlovin/delphine/rgb_led/info.json b/keyboards/mechlovin/delphine/rgb_led/info.json index 3b9fb036e9..dc604d5382 100644 --- a/keyboards/mechlovin/delphine/rgb_led/info.json +++ b/keyboards/mechlovin/delphine/rgb_led/info.json @@ -3,6 +3,12 @@ "pid": "0xDEF2", "device_version": "0.0.1" }, + "rgblight": { + "saturation_steps": 8, + "brightness_steps": 8, + "led_count": 13, + "sleep": true + }, "ws2812": { "pin": "E2" }, diff --git a/keyboards/mechlovin/foundation/config.h b/keyboards/mechlovin/foundation/config.h index cdcfe8572c..701ca1705f 100644 --- a/keyboards/mechlovin/foundation/config.h +++ b/keyboards/mechlovin/foundation/config.h @@ -17,11 +17,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #pragma once -# define RGBLED_NUM 22 -# define RGBLIGHT_HUE_STEP 8 -# define RGBLIGHT_SAT_STEP 8 -# define RGBLIGHT_VAL_STEP 8 -# define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */ # define RGBLIGHT_EFFECT_BREATHING # define RGBLIGHT_EFFECT_RAINBOW_MOOD # define RGBLIGHT_EFFECT_RAINBOW_SWIRL @@ -32,5 +27,3 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. # define RGBLIGHT_EFFECT_RGB_TEST # define RGBLIGHT_EFFECT_ALTERNATING # define RGBLIGHT_EFFECT_TWINKLE - -#define TAP_CODE_DELAY 10
\ No newline at end of file diff --git a/keyboards/mechlovin/foundation/info.json b/keyboards/mechlovin/foundation/info.json index 7132ecb953..54464510c8 100644 --- a/keyboards/mechlovin/foundation/info.json +++ b/keyboards/mechlovin/foundation/info.json @@ -18,10 +18,19 @@ {"pin_a": "C13", "pin_b": "C14"} ] }, + "qmk": { + "tap_keycode_delay": 10 + }, "indicators": { "caps_lock": "A1", "on_state": 0 }, + "rgblight": { + "saturation_steps": 8, + "brightness_steps": 8, + "led_count": 22, + "sleep": true + }, "ws2812": { "pin": "B15" }, diff --git a/keyboards/mechlovin/hannah60rgb/rev2/config.h b/keyboards/mechlovin/hannah60rgb/rev2/config.h index 81335f31be..1b583f2a46 100644 --- a/keyboards/mechlovin/hannah60rgb/rev2/config.h +++ b/keyboards/mechlovin/hannah60rgb/rev2/config.h @@ -1,7 +1,6 @@ #pragma once #ifdef RGBLIGHT_ENABLE -# define RGBLED_NUM 18 # define RGBLIGHT_EFFECT_BREATHING # define RGBLIGHT_EFFECT_RAINBOW_MOOD # define RGBLIGHT_EFFECT_RAINBOW_SWIRL @@ -12,9 +11,6 @@ # define RGBLIGHT_EFFECT_RGB_TEST # define RGBLIGHT_EFFECT_ALTERNATING # define RGBLIGHT_EFFECT_TWINKLE -# define RGBLIGHT_HUE_STEP 8 -# define RGBLIGHT_SAT_STEP 8 -# define RGBLIGHT_VAL_STEP 8 #endif //rgb matrix setting// This is a 7-bit address, that gets left-shifted and bit 0 diff --git a/keyboards/mechlovin/hannah60rgb/rev2/info.json b/keyboards/mechlovin/hannah60rgb/rev2/info.json index 61ce6898c8..c81c908174 100644 --- a/keyboards/mechlovin/hannah60rgb/rev2/info.json +++ b/keyboards/mechlovin/hannah60rgb/rev2/info.json @@ -8,6 +8,11 @@ "pid": "0x6002", "device_version": "0.0.1" }, + "rgblight": { + "saturation_steps": 8, + "brightness_steps": 8, + "led_count": 18 + }, "ws2812": { "pin": "A15" }, diff --git a/keyboards/mechlovin/hannah910/rev1/config.h b/keyboards/mechlovin/hannah910/rev1/config.h deleted file mode 100644 index 7b793c75b9..0000000000 --- a/keyboards/mechlovin/hannah910/rev1/config.h +++ /dev/null @@ -1,3 +0,0 @@ -#pragma once - -#define RGBLED_NUM 9
\ No newline at end of file diff --git a/keyboards/mechlovin/hannah910/rev1/info.json b/keyboards/mechlovin/hannah910/rev1/info.json index 49eb2af5c1..0dea587cb5 100644 --- a/keyboards/mechlovin/hannah910/rev1/info.json +++ b/keyboards/mechlovin/hannah910/rev1/info.json @@ -17,6 +17,9 @@ "pin": "B7", "breathing": true }, + "rgblight": { + "led_count": 9 + }, "ws2812": { "pin": "E2" }, diff --git a/keyboards/mechlovin/hannah910/rev2/config.h b/keyboards/mechlovin/hannah910/rev2/config.h deleted file mode 100644 index c37c581ae6..0000000000 --- a/keyboards/mechlovin/hannah910/rev2/config.h +++ /dev/null @@ -1,3 +0,0 @@ -#pragma once - -#define RGBLED_NUM 28
\ No newline at end of file diff --git a/keyboards/mechlovin/hannah910/rev2/info.json b/keyboards/mechlovin/hannah910/rev2/info.json index 43f6ab51a1..177831d153 100644 --- a/keyboards/mechlovin/hannah910/rev2/info.json +++ b/keyboards/mechlovin/hannah910/rev2/info.json @@ -17,6 +17,9 @@ "pin": "B7", "breathing": true }, + "rgblight": { + "led_count": 28 + }, "ws2812": { "pin": "E2" }, diff --git a/keyboards/mechlovin/hannah910/rev3/config.h b/keyboards/mechlovin/hannah910/rev3/config.h deleted file mode 100644 index fbb878ab6a..0000000000 --- a/keyboards/mechlovin/hannah910/rev3/config.h +++ /dev/null @@ -1,3 +0,0 @@ -#pragma once - -#define RGBLED_NUM 28 diff --git a/keyboards/mechlovin/hannah910/rev3/info.json b/keyboards/mechlovin/hannah910/rev3/info.json index d6b606913d..df5a850bf5 100644 --- a/keyboards/mechlovin/hannah910/rev3/info.json +++ b/keyboards/mechlovin/hannah910/rev3/info.json @@ -17,6 +17,9 @@ "pin": "B7", "breathing": true }, + "rgblight": { + "led_count": 28 + }, "ws2812": { "pin": "E2" }, diff --git a/keyboards/mechlovin/hex6c/config.h b/keyboards/mechlovin/hex6c/config.h index a22137acf7..48bf717581 100644 --- a/keyboards/mechlovin/hex6c/config.h +++ b/keyboards/mechlovin/hex6c/config.h @@ -20,7 +20,5 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #define BACKLIGHT_PWM_DRIVER PWMD3 #define BACKLIGHT_PWM_CHANNEL 3 -#define TAP_CODE_DELAY 10 - #define WEAR_LEVELING_BACKING_SIZE 4096 #define WEAR_LEVELING_LOGICAL_SIZE 2048 diff --git a/keyboards/mechlovin/hex6c/info.json b/keyboards/mechlovin/hex6c/info.json index 4ae471cb47..dfeb91e0ba 100644 --- a/keyboards/mechlovin/hex6c/info.json +++ b/keyboards/mechlovin/hex6c/info.json @@ -18,6 +18,9 @@ {"pin_a": "A15", "pin_b": "A2"} ] }, + "qmk": { + "tap_keycode_delay": 10 + }, "backlight": { "pin": "B0", "breathing": true diff --git a/keyboards/mechlovin/infinity87/rev1/standard/config.h b/keyboards/mechlovin/infinity87/rev1/standard/config.h index 7b3e497cdf..8427cb2140 100644 --- a/keyboards/mechlovin/infinity87/rev1/standard/config.h +++ b/keyboards/mechlovin/infinity87/rev1/standard/config.h @@ -16,8 +16,6 @@ #pragma once -#define RGBLED_NUM 26 -#define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */ #define RGBLIGHT_EFFECT_BREATHING #define RGBLIGHT_EFFECT_RAINBOW_MOOD #define RGBLIGHT_EFFECT_RAINBOW_SWIRL diff --git a/keyboards/mechlovin/infinity87/rev1/standard/info.json b/keyboards/mechlovin/infinity87/rev1/standard/info.json index c83cad4b06..f042e94761 100644 --- a/keyboards/mechlovin/infinity87/rev1/standard/info.json +++ b/keyboards/mechlovin/infinity87/rev1/standard/info.json @@ -8,6 +8,10 @@ "pid": "0x8701", "device_version": "0.0.1" }, + "rgblight": { + "led_count": 26, + "sleep": true + }, "ws2812": { "pin": "A15" }, diff --git a/keyboards/mechlovin/infinity87/rev2/config.h b/keyboards/mechlovin/infinity87/rev2/config.h index 851a9f860e..a54086651c 100644 --- a/keyboards/mechlovin/infinity87/rev2/config.h +++ b/keyboards/mechlovin/infinity87/rev2/config.h @@ -35,11 +35,6 @@ #define DIODE_DIRECTION ROW2COL #ifdef RGBLIGHT_ENABLE -#define RGBLED_NUM 24 -#define RGBLIGHT_HUE_STEP 8 -#define RGBLIGHT_SAT_STEP 8 -#define RGBLIGHT_VAL_STEP 8 -#define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */ #define RGBLIGHT_EFFECT_BREATHING #define RGBLIGHT_EFFECT_RAINBOW_MOOD #define RGBLIGHT_EFFECT_RAINBOW_SWIRL diff --git a/keyboards/mechlovin/infinity87/rev2/info.json b/keyboards/mechlovin/infinity87/rev2/info.json index d3b5cfc3ca..bb66e75f2e 100644 --- a/keyboards/mechlovin/infinity87/rev2/info.json +++ b/keyboards/mechlovin/infinity87/rev2/info.json @@ -17,6 +17,12 @@ "num_lock": "D7", "scroll_lock": "B4" }, + "rgblight": { + "saturation_steps": 8, + "brightness_steps": 8, + "led_count": 24, + "sleep": true + }, "ws2812": { "pin": "E2" }, diff --git a/keyboards/mechlovin/infinity88/config.h b/keyboards/mechlovin/infinity88/config.h index 40bcfcfeb9..9f5eaf5d87 100644 --- a/keyboards/mechlovin/infinity88/config.h +++ b/keyboards/mechlovin/infinity88/config.h @@ -20,8 +20,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #define BACKLIGHT_PWM_DRIVER PWMD3 #define BACKLIGHT_PWM_CHANNEL 3 -#define RGBLED_NUM 26 -#define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */ /*== all animations enable ==*/#define RGBLIGHT_EFFECT_BREATHING #define RGBLIGHT_EFFECT_RAINBOW_MOOD #define RGBLIGHT_EFFECT_RAINBOW_SWIRL diff --git a/keyboards/mechlovin/infinity88/info.json b/keyboards/mechlovin/infinity88/info.json index fdbb45a7d6..d69b97712f 100644 --- a/keyboards/mechlovin/infinity88/info.json +++ b/keyboards/mechlovin/infinity88/info.json @@ -21,6 +21,10 @@ "caps_lock": "A4", "num_lock": "A3" }, + "rgblight": { + "led_count": 26, + "sleep": true + }, "ws2812": { "pin": "A15" }, diff --git a/keyboards/mechlovin/infinityce/config.h b/keyboards/mechlovin/infinityce/config.h index 88c6c21dfa..061ea19c09 100644 --- a/keyboards/mechlovin/infinityce/config.h +++ b/keyboards/mechlovin/infinityce/config.h @@ -17,7 +17,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #pragma once -#define RGBLED_NUM 31 #define RGBLIGHT_EFFECT_BREATHING #define RGBLIGHT_EFFECT_RAINBOW_MOOD #define RGBLIGHT_EFFECT_RAINBOW_SWIRL diff --git a/keyboards/mechlovin/infinityce/info.json b/keyboards/mechlovin/infinityce/info.json index 1c49d54106..35cec0e699 100644 --- a/keyboards/mechlovin/infinityce/info.json +++ b/keyboards/mechlovin/infinityce/info.json @@ -17,6 +17,9 @@ "pin": "B7", "breathing": true }, + "rgblight": { + "led_count": 31 + }, "ws2812": { "pin": "E2" }, diff --git a/keyboards/mechlovin/kanu/config.h b/keyboards/mechlovin/kanu/config.h index bfa2908890..c7bed0450a 100644 --- a/keyboards/mechlovin/kanu/config.h +++ b/keyboards/mechlovin/kanu/config.h @@ -17,7 +17,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #pragma once -#define RGBLED_NUM 6 #define RGBLIGHT_EFFECT_BREATHING #define RGBLIGHT_EFFECT_RAINBOW_MOOD #define RGBLIGHT_EFFECT_RAINBOW_SWIRL diff --git a/keyboards/mechlovin/kanu/info.json b/keyboards/mechlovin/kanu/info.json index 1e8dafd2d7..1ac79221b7 100644 --- a/keyboards/mechlovin/kanu/info.json +++ b/keyboards/mechlovin/kanu/info.json @@ -17,6 +17,9 @@ "pin": "B7", "breathing": true }, + "rgblight": { + "led_count": 6 + }, "ws2812": { "pin": "E2" }, diff --git a/keyboards/mechlovin/kay60/config.h b/keyboards/mechlovin/kay60/config.h index bf5e80fc75..ae0aa6551b 100644 --- a/keyboards/mechlovin/kay60/config.h +++ b/keyboards/mechlovin/kay60/config.h @@ -17,11 +17,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #pragma once -# define RGBLED_NUM 22 -# define RGBLIGHT_HUE_STEP 8 -# define RGBLIGHT_SAT_STEP 8 -# define RGBLIGHT_VAL_STEP 8 -# define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */ # define RGBLIGHT_EFFECT_BREATHING # define RGBLIGHT_EFFECT_RAINBOW_MOOD # define RGBLIGHT_EFFECT_RAINBOW_SWIRL diff --git a/keyboards/mechlovin/kay60/info.json b/keyboards/mechlovin/kay60/info.json index 698247d76b..50d9d409f3 100644 --- a/keyboards/mechlovin/kay60/info.json +++ b/keyboards/mechlovin/kay60/info.json @@ -16,6 +16,12 @@ "indicators": { "caps_lock": "B0" }, + "rgblight": { + "saturation_steps": 8, + "brightness_steps": 8, + "led_count": 22, + "sleep": true + }, "ws2812": { "pin": "E2" }, diff --git a/keyboards/mechlovin/kay65/config.h b/keyboards/mechlovin/kay65/config.h index 1fb8123364..ae0aa6551b 100644 --- a/keyboards/mechlovin/kay65/config.h +++ b/keyboards/mechlovin/kay65/config.h @@ -17,11 +17,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #pragma once -# define RGBLED_NUM 24 -# define RGBLIGHT_HUE_STEP 8 -# define RGBLIGHT_SAT_STEP 8 -# define RGBLIGHT_VAL_STEP 8 -# define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */ # define RGBLIGHT_EFFECT_BREATHING # define RGBLIGHT_EFFECT_RAINBOW_MOOD # define RGBLIGHT_EFFECT_RAINBOW_SWIRL diff --git a/keyboards/mechlovin/kay65/info.json b/keyboards/mechlovin/kay65/info.json index fbd556217c..bb5fea24a9 100644 --- a/keyboards/mechlovin/kay65/info.json +++ b/keyboards/mechlovin/kay65/info.json @@ -17,6 +17,12 @@ "caps_lock": "D6", "on_state": 0 }, + "rgblight": { + "saturation_steps": 8, + "brightness_steps": 8, + "led_count": 24, + "sleep": true + }, "ws2812": { "pin": "E2" }, diff --git a/keyboards/mechlovin/olly/bb/config.h b/keyboards/mechlovin/olly/bb/config.h index e48a1c82a1..5c86bf9604 100644 --- a/keyboards/mechlovin/olly/bb/config.h +++ b/keyboards/mechlovin/olly/bb/config.h @@ -35,8 +35,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #define MATRIX_ROW_PINS {D6, A5, A4, A3, A6} #ifdef RGBLIGHT_ENABLE -#define RGBLED_NUM 24 -#define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */ /*== all animations enable ==*/ #define RGBLIGHT_EFFECT_BREATHING #define RGBLIGHT_EFFECT_RAINBOW_MOOD diff --git a/keyboards/mechlovin/olly/bb/info.json b/keyboards/mechlovin/olly/bb/info.json index c3b55f95d8..51ba7cdf5c 100644 --- a/keyboards/mechlovin/olly/bb/info.json +++ b/keyboards/mechlovin/olly/bb/info.json @@ -12,6 +12,10 @@ "pin": "D4", "breathing": true }, + "rgblight": { + "led_count": 24, + "sleep": true + }, "ws2812": { "pin": "B3" }, diff --git a/keyboards/mechlovin/olly/jf/config.h b/keyboards/mechlovin/olly/jf/config.h index c028a04554..271830740b 100644 --- a/keyboards/mechlovin/olly/jf/config.h +++ b/keyboards/mechlovin/olly/jf/config.h @@ -37,8 +37,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. /* COL2ROW, ROW2COL */ #define DIODE_DIRECTION ROW2COL -#define RGBLED_NUM 27 -#define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */ /*== all animations enable ==*/ #define RGBLIGHT_EFFECT_BREATHING #define RGBLIGHT_EFFECT_RAINBOW_MOOD diff --git a/keyboards/mechlovin/olly/jf/info.json b/keyboards/mechlovin/olly/jf/info.json index 0d49cb611a..5152ece20d 100644 --- a/keyboards/mechlovin/olly/jf/info.json +++ b/keyboards/mechlovin/olly/jf/info.json @@ -17,6 +17,10 @@ "num_lock": "B1", "scroll_lock": "B2" }, + "rgblight": { + "led_count": 27, + "sleep": true + }, "ws2812": { "pin": "B3" }, diff --git a/keyboards/mechlovin/olly/octagon/config.h b/keyboards/mechlovin/olly/octagon/config.h index a1127f6aad..14f4412796 100644 --- a/keyboards/mechlovin/olly/octagon/config.h +++ b/keyboards/mechlovin/olly/octagon/config.h @@ -18,7 +18,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #pragma once #ifdef RGBLIGHT_ENABLE -#define RGBLED_NUM 26 #define RGBLIGHT_EFFECT_BREATHING #define RGBLIGHT_EFFECT_RAINBOW_MOOD #define RGBLIGHT_EFFECT_RAINBOW_SWIRL @@ -29,9 +28,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #define RGBLIGHT_EFFECT_RGB_TEST #define RGBLIGHT_EFFECT_ALTERNATING #define RGBLIGHT_EFFECT_TWINKLE -#define RGBLIGHT_HUE_STEP 8 -#define RGBLIGHT_SAT_STEP 8 -#define RGBLIGHT_VAL_STEP 8 #endif #ifdef LED_MATRIX_ENABLE diff --git a/keyboards/mechlovin/olly/octagon/info.json b/keyboards/mechlovin/olly/octagon/info.json index 81893874e0..90695c1bc8 100644 --- a/keyboards/mechlovin/olly/octagon/info.json +++ b/keyboards/mechlovin/olly/octagon/info.json @@ -8,6 +8,11 @@ "pid": "0xD750", "device_version": "0.0.1" }, + "rgblight": { + "saturation_steps": 8, + "brightness_steps": 8, + "led_count": 26 + }, "ws2812": { "pin": "A7" }, diff --git a/keyboards/mechlovin/olly/orion/config.h b/keyboards/mechlovin/olly/orion/config.h index 9b3e98be71..d35228d7ec 100644 --- a/keyboards/mechlovin/olly/orion/config.h +++ b/keyboards/mechlovin/olly/orion/config.h @@ -18,11 +18,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #pragma once #ifdef RGBLIGHT_ENABLE -# define RGBLED_NUM 24 -# define RGBLIGHT_HUE_STEP 8 -# define RGBLIGHT_SAT_STEP 8 -# define RGBLIGHT_VAL_STEP 8 -# define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */ # define RGBLIGHT_EFFECT_BREATHING # define RGBLIGHT_EFFECT_RAINBOW_MOOD # define RGBLIGHT_EFFECT_RAINBOW_SWIRL diff --git a/keyboards/mechlovin/olly/orion/info.json b/keyboards/mechlovin/olly/orion/info.json index ad792e81af..e85b6c9996 100644 --- a/keyboards/mechlovin/olly/orion/info.json +++ b/keyboards/mechlovin/olly/orion/info.json @@ -18,6 +18,12 @@ "num_lock": "A13", "scroll_lock": "A14" }, + "rgblight": { + "saturation_steps": 8, + "brightness_steps": 8, + "led_count": 24, + "sleep": true + }, "ws2812": { "pin": "B15" }, diff --git a/keyboards/mechlovin/pisces/config.h b/keyboards/mechlovin/pisces/config.h index 5cc93f2d91..c7bed0450a 100644 --- a/keyboards/mechlovin/pisces/config.h +++ b/keyboards/mechlovin/pisces/config.h @@ -17,11 +17,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #pragma once - #define RGBLED_NUM 12 - #define RGBLIGHT_HUE_STEP 8 - #define RGBLIGHT_SAT_STEP 8 - #define RGBLIGHT_VAL_STEP 8 - #define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */ #define RGBLIGHT_EFFECT_BREATHING #define RGBLIGHT_EFFECT_RAINBOW_MOOD #define RGBLIGHT_EFFECT_RAINBOW_SWIRL diff --git a/keyboards/mechlovin/pisces/info.json b/keyboards/mechlovin/pisces/info.json index 84fdaefd21..7a2f923a36 100644 --- a/keyboards/mechlovin/pisces/info.json +++ b/keyboards/mechlovin/pisces/info.json @@ -19,6 +19,12 @@ "indicators": { "caps_lock": "B2" }, + "rgblight": { + "saturation_steps": 8, + "brightness_steps": 8, + "led_count": 12, + "sleep": true + }, "ws2812": { "pin": "E2" }, diff --git a/keyboards/mechlovin/serratus/config.h b/keyboards/mechlovin/serratus/config.h index 1efbadfd29..5cf074deb8 100644 --- a/keyboards/mechlovin/serratus/config.h +++ b/keyboards/mechlovin/serratus/config.h @@ -39,11 +39,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #define DIODE_DIRECTION ROW2COL #ifdef RGBLIGHT_ENABLE -#define RGBLED_NUM 24 -#define RGBLIGHT_HUE_STEP 8 -#define RGBLIGHT_SAT_STEP 8 -#define RGBLIGHT_VAL_STEP 8 -#define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */ #define RGBLIGHT_EFFECT_BREATHING #define RGBLIGHT_EFFECT_RAINBOW_MOOD #define RGBLIGHT_EFFECT_RAINBOW_SWIRL diff --git a/keyboards/mechlovin/serratus/info.json b/keyboards/mechlovin/serratus/info.json index 69a64066cd..57a1d831fd 100644 --- a/keyboards/mechlovin/serratus/info.json +++ b/keyboards/mechlovin/serratus/info.json @@ -17,6 +17,12 @@ "num_lock": "D7", "scroll_lock": "B4" }, + "rgblight": { + "saturation_steps": 8, + "brightness_steps": 8, + "led_count": 24, + "sleep": true + }, "ws2812": { "pin": "E2" }, diff --git a/keyboards/mechlovin/zed60/config.h b/keyboards/mechlovin/zed60/config.h index 01e1b51b1c..e53e0589d5 100644 --- a/keyboards/mechlovin/zed60/config.h +++ b/keyboards/mechlovin/zed60/config.h @@ -18,16 +18,10 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #pragma once #ifdef RGBLIGHT_ENABLE -#define RGBLED_NUM 22 #define WS2812_SPI SPID1 // default: SPID1 #define WS2812_SPI_MOSI_PAL_MODE 6 // MOSI pin "alternate function", see the respective datasheet for the appropriate values for your MCU. default: 5 -# define RGBLIGHT_HUE_STEP 8 -# define RGBLIGHT_SAT_STEP 8 -# define RGBLIGHT_VAL_STEP 8 -# define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */ - # define RGBLIGHT_EFFECT_BREATHING # define RGBLIGHT_EFFECT_RAINBOW_MOOD # define RGBLIGHT_EFFECT_RAINBOW_SWIRL diff --git a/keyboards/mechlovin/zed60/info.json b/keyboards/mechlovin/zed60/info.json index f02dfd89a5..0ea84ac95c 100644 --- a/keyboards/mechlovin/zed60/info.json +++ b/keyboards/mechlovin/zed60/info.json @@ -16,6 +16,12 @@ "indicators": { "caps_lock": "A4" }, + "rgblight": { + "saturation_steps": 8, + "brightness_steps": 8, + "led_count": 22, + "sleep": true + }, "ws2812": { "pin": "A7", "driver": "spi" diff --git a/keyboards/mechlovin/zed65/mono_led/config.h b/keyboards/mechlovin/zed65/mono_led/config.h index 9806ec92d6..efaea9b16f 100644 --- a/keyboards/mechlovin/zed65/mono_led/config.h +++ b/keyboards/mechlovin/zed65/mono_led/config.h @@ -61,11 +61,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #define VIA_QMK_LED_MATRIX_ENABLE #endif -# define RGBLED_NUM 24 -# define RGBLIGHT_HUE_STEP 8 -# define RGBLIGHT_SAT_STEP 8 -# define RGBLIGHT_VAL_STEP 8 -# define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */ # define RGBLIGHT_EFFECT_BREATHING # define RGBLIGHT_EFFECT_RAINBOW_MOOD # define RGBLIGHT_EFFECT_RAINBOW_SWIRL diff --git a/keyboards/mechlovin/zed65/mono_led/info.json b/keyboards/mechlovin/zed65/mono_led/info.json index c2133902ce..72fc0ecf87 100644 --- a/keyboards/mechlovin/zed65/mono_led/info.json +++ b/keyboards/mechlovin/zed65/mono_led/info.json @@ -8,6 +8,12 @@ "pid": "0x6503", "device_version": "0.0.1" }, + "rgblight": { + "saturation_steps": 8, + "brightness_steps": 8, + "led_count": 24, + "sleep": true + }, "ws2812": { "pin": "A7" }, diff --git a/keyboards/mechlovin/zed65/no_backlight/retro66/config.h b/keyboards/mechlovin/zed65/no_backlight/retro66/config.h deleted file mode 100644 index 6786e3b953..0000000000 --- a/keyboards/mechlovin/zed65/no_backlight/retro66/config.h +++ /dev/null @@ -1,20 +0,0 @@ -/* -Copyright 2022 Mechlovin' - -This program is free software: you can redistribute it and/or modify -it under the terms of the GNU General Public License as published by -the Free Software Foundation, either version 2 of the License, or -(at your option) any later version. - -This program is distributed in the hope that it will be useful, -but WITHOUT ANY WARRANTY; without even the implied warranty of -MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -GNU General Public License for more details. - -You should have received a copy of the GNU General Public License -along with this program. If not, see <http://www.gnu.org/licenses/>. -*/ - -#pragma once - -#define TAP_CODE_DELAY 10
\ No newline at end of file diff --git a/keyboards/mechlovin/zed65/no_backlight/retro66/info.json b/keyboards/mechlovin/zed65/no_backlight/retro66/info.json index 7919090563..0709014f76 100644 --- a/keyboards/mechlovin/zed65/no_backlight/retro66/info.json +++ b/keyboards/mechlovin/zed65/no_backlight/retro66/info.json @@ -19,6 +19,9 @@ {"pin_a": "B6", "pin_b": "B9"} ] }, + "qmk": { + "tap_keycode_delay": 10 + }, "indicators": { "caps_lock": "C14" }, diff --git a/keyboards/mechlovin/zed65/no_backlight/wearhaus66/config.h b/keyboards/mechlovin/zed65/no_backlight/wearhaus66/config.h index 9f668f2c47..1dd70424cc 100644 --- a/keyboards/mechlovin/zed65/no_backlight/wearhaus66/config.h +++ b/keyboards/mechlovin/zed65/no_backlight/wearhaus66/config.h @@ -18,16 +18,10 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #pragma once #ifdef RGBLIGHT_ENABLE -#define RGBLED_NUM 24 #define WS2812_SPI SPID2 // default: SPID1 #define WS2812_SPI_MOSI_PAL_MODE 0 // MOSI pin "alternate function", see the respective datasheet for the appropriate values for your MCU. default: 5 -# define RGBLIGHT_HUE_STEP 8 -# define RGBLIGHT_SAT_STEP 8 -# define RGBLIGHT_VAL_STEP 8 -# define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */ - # define RGBLIGHT_EFFECT_BREATHING # define RGBLIGHT_EFFECT_RAINBOW_MOOD # define RGBLIGHT_EFFECT_RAINBOW_SWIRL diff --git a/keyboards/mechlovin/zed65/no_backlight/wearhaus66/info.json b/keyboards/mechlovin/zed65/no_backlight/wearhaus66/info.json index 264d20504c..73f2347cb1 100644 --- a/keyboards/mechlovin/zed65/no_backlight/wearhaus66/info.json +++ b/keyboards/mechlovin/zed65/no_backlight/wearhaus66/info.json @@ -16,6 +16,12 @@ "indicators": { "caps_lock": "C14" }, + "rgblight": { + "saturation_steps": 8, + "brightness_steps": 8, + "led_count": 24, + "sleep": true + }, "ws2812": { "pin": "B15", "driver": "spi" diff --git a/keyboards/mechstudio/ud_40_ortho/config.h b/keyboards/mechstudio/ud_40_ortho/config.h index 4dea48a878..2c35fe5fdb 100644 --- a/keyboards/mechstudio/ud_40_ortho/config.h +++ b/keyboards/mechstudio/ud_40_ortho/config.h @@ -16,11 +16,6 @@ #pragma once - #define RGBLED_NUM 10 - #define RGBLIGHT_HUE_STEP 8 - #define RGBLIGHT_SAT_STEP 8 - #define RGBLIGHT_VAL_STEP 8 - #define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */ #define RGBLIGHT_EFFECT_BREATHING #define RGBLIGHT_EFFECT_RAINBOW_MOOD #define RGBLIGHT_EFFECT_RAINBOW_SWIRL diff --git a/keyboards/mechstudio/ud_40_ortho/info.json b/keyboards/mechstudio/ud_40_ortho/info.json index fe38614965..e2eb8f36f9 100644 --- a/keyboards/mechstudio/ud_40_ortho/info.json +++ b/keyboards/mechstudio/ud_40_ortho/info.json @@ -17,6 +17,12 @@ "esc_input": "B7", "esc_output": "F0" }, + "rgblight": { + "saturation_steps": 8, + "brightness_steps": 8, + "led_count": 10, + "sleep": true + }, "ws2812": { "pin": "B7" }, diff --git a/keyboards/mechwild/mercutio/config.h b/keyboards/mechwild/mercutio/config.h index f9f13d9ac0..7a7d9cfd15 100755 --- a/keyboards/mechwild/mercutio/config.h +++ b/keyboards/mechwild/mercutio/config.h @@ -17,8 +17,6 @@ #pragma once -#define TAP_CODE_DELAY 10 - /* Define custom font */ #define OLED_FONT_H "lib/mercutiofont.c" diff --git a/keyboards/mechwild/mercutio/info.json b/keyboards/mechwild/mercutio/info.json index f4b1fa141a..796d22e363 100644 --- a/keyboards/mechwild/mercutio/info.json +++ b/keyboards/mechwild/mercutio/info.json @@ -18,6 +18,9 @@ {"pin_a": "B4", "pin_b": "B5"} ] }, + "qmk": { + "tap_keycode_delay": 10 + }, "processor": "atmega328p", "bootloader": "usbasploader", "layouts": { diff --git a/keyboards/mechwild/mokulua/mirrored/config.h b/keyboards/mechwild/mokulua/mirrored/config.h index c8381bc636..3e746d8615 100644 --- a/keyboards/mechwild/mokulua/mirrored/config.h +++ b/keyboards/mechwild/mokulua/mirrored/config.h @@ -3,25 +3,16 @@ #pragma once -#define TAP_CODE_DELAY 10 - #define OLED_FONT_H "keyboards/mechwild/mokulua/glcdfont.c" #define MASTER_LEFT //#define MASTER_RIGHT -#define RGBLIGHT_SPLIT -#define RGBLED_SPLIT { 8, 8 } #define SPLIT_LAYER_STATE_ENABLE #define SPLIT_LED_STATE_ENABLE #define SPLIT_MODS_ENABLE #define SPLIT_OLED_ENABLE /* RGB options */ -# define RGBLED_NUM 16 -# define RGBLIGHT_HUE_STEP 8 -# define RGBLIGHT_SAT_STEP 8 -# define RGBLIGHT_VAL_STEP 8 -# define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */ /*== choose RGB animations ==*/ //# define RGBLIGHT_EFFECT_BREATHING # define RGBLIGHT_EFFECT_RAINBOW_MOOD diff --git a/keyboards/mechwild/mokulua/mirrored/info.json b/keyboards/mechwild/mokulua/mirrored/info.json index 5401c8898f..efdab99de7 100644 --- a/keyboards/mechwild/mokulua/mirrored/info.json +++ b/keyboards/mechwild/mokulua/mirrored/info.json @@ -18,9 +18,19 @@ {"pin_a": "D2", "pin_b": "B2"} ] }, + "qmk": { + "tap_keycode_delay": 10 + }, "split": { "soft_serial_pin": "D3" }, + "rgblight": { + "saturation_steps": 8, + "brightness_steps": 8, + "led_count": 16, + "sleep": true, + "split_count": [8, 8] + }, "ws2812": { "pin": "B6" }, diff --git a/keyboards/mechwild/mokulua/standard/config.h b/keyboards/mechwild/mokulua/standard/config.h index 7f902d0ca4..681c235764 100644 --- a/keyboards/mechwild/mokulua/standard/config.h +++ b/keyboards/mechwild/mokulua/standard/config.h @@ -3,25 +3,16 @@ #pragma once -#define TAP_CODE_DELAY 10 - #define OLED_FONT_H "keyboards/mechwild/mokulua/glcdfont.c" #define MASTER_LEFT //#define MASTER_RIGHT -#define RGBLIGHT_SPLIT -#define RGBLED_SPLIT { 8, 8 } #define SPLIT_LAYER_STATE_ENABLE #define SPLIT_LED_STATE_ENABLE #define SPLIT_MODS_ENABLE #define SPLIT_OLED_ENABLE /* RGB options */ -# define RGBLED_NUM 16 -# define RGBLIGHT_HUE_STEP 8 -# define RGBLIGHT_SAT_STEP 8 -# define RGBLIGHT_VAL_STEP 8 -# define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */ /*== choose RGB animations ==*/ //# define RGBLIGHT_EFFECT_BREATHING # define RGBLIGHT_EFFECT_RAINBOW_MOOD diff --git a/keyboards/mechwild/mokulua/standard/info.json b/keyboards/mechwild/mokulua/standard/info.json index 4ab38d9d37..d634df9ee7 100644 --- a/keyboards/mechwild/mokulua/standard/info.json +++ b/keyboards/mechwild/mokulua/standard/info.json @@ -18,9 +18,19 @@ {"pin_a": "D2", "pin_b": "B2"} ] }, + "qmk": { + "tap_keycode_delay": 10 + }, "split": { "soft_serial_pin": "D3" }, + "rgblight": { + "saturation_steps": 8, + "brightness_steps": 8, + "led_count": 16, + "sleep": true, + "split_count": [8, 8] + }, "ws2812": { "pin": "B6" }, diff --git a/keyboards/mechwild/murphpad/config.h b/keyboards/mechwild/murphpad/config.h index 000ad09768..3f3be7d484 100644 --- a/keyboards/mechwild/murphpad/config.h +++ b/keyboards/mechwild/murphpad/config.h @@ -17,15 +17,8 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #pragma once -#define TAP_CODE_DELAY 10 - #define OLED_FONT_H "keyboards/mechwild/murphpad/lib/murphpadfont.c" -# define RGBLED_NUM 8 -# define RGBLIGHT_HUE_STEP 8 -# define RGBLIGHT_SAT_STEP 8 -# define RGBLIGHT_VAL_STEP 8 -# define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */ #define RGBLIGHT_EFFECT_BREATHING #define RGBLIGHT_EFFECT_RAINBOW_MOOD #define RGBLIGHT_EFFECT_RAINBOW_SWIRL diff --git a/keyboards/mechwild/murphpad/info.json b/keyboards/mechwild/murphpad/info.json index 29247492ca..307cb5e13e 100644 --- a/keyboards/mechwild/murphpad/info.json +++ b/keyboards/mechwild/murphpad/info.json @@ -19,9 +19,18 @@ {"pin_a": "D2", "pin_b": "D3"} ] }, + "qmk": { + "tap_keycode_delay": 10 + }, "bootmagic": { "matrix": [0, 1] }, + "rgblight": { + "saturation_steps": 8, + "brightness_steps": 8, + "led_count": 8, + "sleep": true + }, "ws2812": { "pin": "F4" }, diff --git a/keyboards/mechwild/obe/config.h b/keyboards/mechwild/obe/config.h index 300bb16ef5..98bad4a615 100644 --- a/keyboards/mechwild/obe/config.h +++ b/keyboards/mechwild/obe/config.h @@ -17,14 +17,7 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #pragma once -#define TAP_CODE_DELAY 10 - /* RGB settings, uncomment this define to enable RGB */ -# define RGBLED_NUM 10 -# define RGBLIGHT_HUE_STEP 8 -# define RGBLIGHT_SAT_STEP 8 -# define RGBLIGHT_VAL_STEP 8 -# define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */ #define RGBLIGHT_EFFECT_BREATHING #define RGBLIGHT_EFFECT_RAINBOW_MOOD #define RGBLIGHT_EFFECT_RAINBOW_SWIRL diff --git a/keyboards/mechwild/obe/info.json b/keyboards/mechwild/obe/info.json index f529efd1e6..dbf7e6ddaf 100644 --- a/keyboards/mechwild/obe/info.json +++ b/keyboards/mechwild/obe/info.json @@ -18,6 +18,9 @@ {"pin_a": "B5", "pin_b": "B4"} ] }, + "qmk": { + "tap_keycode_delay": 10 + }, "indicators": { "caps_lock": "B9", "num_lock": "B8" @@ -25,6 +28,12 @@ "bootmagic": { "matrix": [5, 4] }, + "rgblight": { + "saturation_steps": 8, + "brightness_steps": 8, + "led_count": 10, + "sleep": true + }, "ws2812": { "pin": "A0" }, diff --git a/keyboards/mechwild/puckbuddy/config.h b/keyboards/mechwild/puckbuddy/config.h index 1df6c97bea..1ca7ed1204 100644 --- a/keyboards/mechwild/puckbuddy/config.h +++ b/keyboards/mechwild/puckbuddy/config.h @@ -13,11 +13,6 @@ /* set the tapping term for glidepoint pad to register a tap click */ //#define CIRQUE_PINNACLE_TAPPING_TERM 0 // This is set to 0 to disable it -/* TAPPING_TERM value is used for the CIRQUE_PINNACLE_TAPPING_TERM as well by default - * defining it this way allows us to easily modify it with DYNAMIC_TAPPING_TERM_ENABLE - */ -#define TAPPING_TERM 0 - /* spi config */ #define SPI_DRIVER SPID1 #define SPI_SCK_PIN A5 @@ -29,14 +24,7 @@ #define CIRQUE_PINNACLE_SPI_DIVISOR 8 #define CIRQUE_PINNACLE_SPI_CS_PIN A4 -#define TAP_CODE_DELAY 10 - /* RGB settings, uncomment this define to enable RGB */ -# define RGBLED_NUM 3 -# define RGBLIGHT_HUE_STEP 8 -# define RGBLIGHT_SAT_STEP 8 -# define RGBLIGHT_VAL_STEP 8 -# define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */ # define RGBLIGHT_EFFECT_BREATHING # define RGBLIGHT_EFFECT_RAINBOW_MOOD # define RGBLIGHT_EFFECT_RAINBOW_SWIRL diff --git a/keyboards/mechwild/puckbuddy/info.json b/keyboards/mechwild/puckbuddy/info.json index b8e653be6b..9586cd075c 100644 --- a/keyboards/mechwild/puckbuddy/info.json +++ b/keyboards/mechwild/puckbuddy/info.json @@ -19,10 +19,22 @@ {"pin_a": "B3", "pin_b": "A15"} ] }, + "qmk": { + "tap_keycode_delay": 10 + }, "indicators": { "caps_lock": "C13", "on_state": 0 }, + "rgblight": { + "saturation_steps": 8, + "brightness_steps": 8, + "led_count": 3, + "sleep": true + }, + "tapping": { + "term": 0 + }, "ws2812": { "pin": "A3" }, diff --git a/keyboards/mechwild/sugarglider/config.h b/keyboards/mechwild/sugarglider/config.h index 1512cc1528..75aa26956c 100644 --- a/keyboards/mechwild/sugarglider/config.h +++ b/keyboards/mechwild/sugarglider/config.h @@ -19,10 +19,6 @@ /* allows the "key" button on the blackpill to toggle caps lock for user testing before soldering */ #define DIP_SWITCH_PINS { A0 } -/* TAPPING_TERM value is used for the CIRQUE_PINNACLE_TAPPING_TERM as well by default - * defining it this way allows us to easily modify it with DYNAMIC_TAPPING_TERM_ENABLE - */ -#define TAPPING_TERM 0 #define CIRQUE_PINNACLE_TAP_ENABLE #define POINTING_DEVICE_GESTURES_SCROLL_ENABLE diff --git a/keyboards/mechwild/sugarglider/info.json b/keyboards/mechwild/sugarglider/info.json index 046776be49..8342600588 100644 --- a/keyboards/mechwild/sugarglider/info.json +++ b/keyboards/mechwild/sugarglider/info.json @@ -42,6 +42,9 @@ "twinkle": true } }, + "tapping": { + "term": 0 + }, "ws2812": { "pin": "B5" }, diff --git a/keyboards/mechwild/waka60/config.h b/keyboards/mechwild/waka60/config.h index 21e197df4c..98bad4a615 100644 --- a/keyboards/mechwild/waka60/config.h +++ b/keyboards/mechwild/waka60/config.h @@ -17,14 +17,7 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #pragma once -#define TAP_CODE_DELAY 10 - /* RGB settings, uncomment this define to enable RGB */ -# define RGBLED_NUM 3 -# define RGBLIGHT_HUE_STEP 8 -# define RGBLIGHT_SAT_STEP 8 -# define RGBLIGHT_VAL_STEP 8 -# define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */ #define RGBLIGHT_EFFECT_BREATHING #define RGBLIGHT_EFFECT_RAINBOW_MOOD #define RGBLIGHT_EFFECT_RAINBOW_SWIRL diff --git a/keyboards/mechwild/waka60/info.json b/keyboards/mechwild/waka60/info.json index 1014411ba0..e33dd5a010 100644 --- a/keyboards/mechwild/waka60/info.json +++ b/keyboards/mechwild/waka60/info.json @@ -8,6 +8,12 @@ "pid": "0x1709", "device_version": "1.0.1" }, + "rgblight": { + "saturation_steps": 8, + "brightness_steps": 8, + "led_count": 3, + "sleep": true + }, "ws2812": { "pin": "A1" }, @@ -21,6 +27,9 @@ {"pin_a": "A3", "pin_b": "A2"} ] }, + "qmk": { + "tap_keycode_delay": 10 + }, "layouts": { "LAYOUT": { "layout": [ diff --git a/keyboards/mecxlabs/mp1/rules.mk b/keyboards/mecxlabs/mp1/rules.mk index ee2a7c0d6a..0ab54aaaf7 100644 --- a/keyboards/mecxlabs/mp1/rules.mk +++ b/keyboards/mecxlabs/mp1/rules.mk @@ -1,4 +1,2 @@ # Wildcard to allow APM32 MCU DFU_SUFFIX_ARGS = -v FFFF -p FFFF -# Enter lower-power sleep mode when on the ChibiOS idle thread -OPT_DEFS += -DCORTEX_ENABLE_WFI_IDLE=TRUE diff --git a/keyboards/mehkee96/config.h b/keyboards/mehkee96/config.h index e5f456306d..12e4413a7a 100644 --- a/keyboards/mehkee96/config.h +++ b/keyboards/mehkee96/config.h @@ -1,6 +1,5 @@ #pragma once -#define RGBLED_NUM 18 #define RGBLIGHT_EFFECT_BREATHING #define RGBLIGHT_EFFECT_RAINBOW_MOOD #define RGBLIGHT_EFFECT_RAINBOW_SWIRL diff --git a/keyboards/mehkee96/info.json b/keyboards/mehkee96/info.json index f192bb5036..45d6758a79 100644 --- a/keyboards/mehkee96/info.json +++ b/keyboards/mehkee96/info.json @@ -16,6 +16,9 @@ "backlight": { "pin": "D4" }, + "rgblight": { + "led_count": 18 + }, "ws2812": { "driver": "i2c" }, diff --git a/keyboards/meletrix/zoom65/info.json b/keyboards/meletrix/zoom65/info.json index 30e4962a29..59de004989 100644 --- a/keyboards/meletrix/zoom65/info.json +++ b/keyboards/meletrix/zoom65/info.json @@ -43,9 +43,7 @@ {"matrix": [0, 12], "x": 12, "y": 0}, {"matrix": [0, 13], "x": 13, "y": 0}, {"matrix": [2, 13], "x": 14, "y": 0}, - {"matrix": [4, 3], "x": 15, "y": 0, "w": 0.5}, {"matrix": [0, 14], "x": 15.5, "y": 0}, - {"matrix": [4, 5], "x": 16.5, "y": 0, "w": 0.5}, {"matrix": [1, 0], "x": 0, "y": 1, "w": 1.5}, {"matrix": [1, 1], "x": 1.5, "y": 1}, diff --git a/keyboards/meletrix/zoom65/keymaps/default/keymap.c b/keyboards/meletrix/zoom65/keymaps/default/keymap.c index 3eab5dabb0..b96eff2257 100644 --- a/keyboards/meletrix/zoom65/keymaps/default/keymap.c +++ b/keyboards/meletrix/zoom65/keymaps/default/keymap.c @@ -18,14 +18,14 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { [0] = LAYOUT_all( - KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_BSPC, KC_VOLD, KC_MUTE, KC_VOLU, + KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_BSPC, KC_MUTE, KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_DEL, KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, KC_PGUP, KC_LSFT, KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_UP, KC_END, KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_SPC, KC_SPC, KC_RALT, MO(1), KC_LEFT, KC_DOWN, KC_RGHT ), [1] = LAYOUT_all( - KC_GRV, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, _______, _______, KC_MPRV, KC_MPLY, KC_MNXT, + KC_GRV, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, _______, _______, KC_MPLY, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, QK_BOOT, diff --git a/keyboards/meletrix/zoom65/keymaps/via/keymap.c b/keyboards/meletrix/zoom65/keymaps/via/keymap.c index 62e10541c2..f593d408d5 100644 --- a/keyboards/meletrix/zoom65/keymaps/via/keymap.c +++ b/keyboards/meletrix/zoom65/keymaps/via/keymap.c @@ -18,31 +18,40 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { [0] = LAYOUT_all( - KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_BSPC, KC_VOLD, KC_MUTE, KC_VOLU, + KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_BSPC, KC_MUTE, KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_DEL, KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, KC_PGUP, KC_LSFT, KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_UP, KC_END, KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_SPC, KC_SPC, KC_RALT, MO(1), KC_LEFT, KC_DOWN, KC_RGHT ), [1] = LAYOUT_all( - KC_GRV, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, _______, _______, KC_MPRV, KC_MPLY, KC_MNXT, + KC_GRV, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, _______, _______, KC_MPLY, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, QK_BOOT, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______ ), [2] = LAYOUT_all( - _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______ ), [3] = LAYOUT_all( - _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______ ), }; + +#ifdef ENCODER_MAP_ENABLE +const uint16_t PROGMEM encoder_map[][NUM_ENCODERS][NUM_DIRECTIONS] = { + [0] = { ENCODER_CCW_CW(KC_VOLD, KC_VOLU) }, + [1] = { ENCODER_CCW_CW(KC_MPRV, KC_MNXT) }, + [2] = { ENCODER_CCW_CW(_______, _______) }, + [3] = { ENCODER_CCW_CW(_______, _______) }, +}; +#endif diff --git a/keyboards/meletrix/zoom65/keymaps/via/rules.mk b/keyboards/meletrix/zoom65/keymaps/via/rules.mk index 43061db1dd..1189f4ad19 100644 --- a/keyboards/meletrix/zoom65/keymaps/via/rules.mk +++ b/keyboards/meletrix/zoom65/keymaps/via/rules.mk @@ -1,2 +1,3 @@ VIA_ENABLE = yes -LTO_ENABLE = yes
\ No newline at end of file +LTO_ENABLE = yes +ENCODER_MAP_ENABLE = yes diff --git a/keyboards/meletrix/zoom65/zoom65.c b/keyboards/meletrix/zoom65/zoom65.c deleted file mode 100644 index 10b48c7b2d..0000000000 --- a/keyboards/meletrix/zoom65/zoom65.c +++ /dev/null @@ -1,64 +0,0 @@ -/* Copyright 2021 meletrix - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see <http://www.gnu.org/licenses/>. - */ - -#include "quantum.h" - -#ifdef VIA_ENABLE -static uint8_t encoder_state[NUM_ENCODERS] = {0}; -static keypos_t encoder_cw[NUM_ENCODERS] = ENCODERS_CW_KEY; -static keypos_t encoder_ccw[NUM_ENCODERS] = ENCODERS_CCW_KEY; - -void encoder_action_unregister(void) -{ - for (int index = 0; index < NUM_ENCODERS; ++index) - { - if (encoder_state[index]) - { - keyevent_t encoder_event = (keyevent_t){ - .key = encoder_state[index] >> 1 ? encoder_cw[index] : encoder_ccw[index], - .pressed = false, - .time = timer_read(), - .type = KEY_EVENT - }; - encoder_state[index] = 0; - action_exec(encoder_event); - } - } -} -void encoder_action_register(uint8_t index, bool clockwise) -{ - keyevent_t encoder_event = (keyevent_t){ - .key = clockwise ? encoder_cw[index] : encoder_ccw[index], - .pressed = true, - .time = timer_read(), - .type = KEY_EVENT - }; - encoder_state[index] = (clockwise ^ 1) | (clockwise << 1); - action_exec(encoder_event); -} - -void matrix_scan_kb(void) -{ - encoder_action_unregister(); - matrix_scan_user(); -} - -bool encoder_update_kb(uint8_t index, bool clockwise) -{ - encoder_action_register(index, clockwise); - return true; -}; -#endif diff --git a/keyboards/meletrix/zoom65_lite/config.h b/keyboards/meletrix/zoom65_lite/config.h deleted file mode 100644 index e5cc1f3e5b..0000000000 --- a/keyboards/meletrix/zoom65_lite/config.h +++ /dev/null @@ -1,21 +0,0 @@ -/* Copyright 2021 meletrix - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see <http://www.gnu.org/licenses/>. - */ - -#pragma once - -// Note: array is { col, row ) -#define ENCODERS_CW_KEY { { 5, 4 } } -#define ENCODERS_CCW_KEY { { 3, 4 } } diff --git a/keyboards/meletrix/zoom65_lite/info.json b/keyboards/meletrix/zoom65_lite/info.json index b8b59a487d..932dc8571e 100644 --- a/keyboards/meletrix/zoom65_lite/info.json +++ b/keyboards/meletrix/zoom65_lite/info.json @@ -43,9 +43,7 @@ {"matrix": [0, 12], "x": 12, "y": 0}, {"matrix": [0, 13], "x": 13, "y": 0}, {"matrix": [2, 13], "x": 14, "y": 0}, - {"matrix": [4, 3], "x": 15, "y": 0, "w": 0.5}, {"matrix": [0, 14], "x": 15.5, "y": 0}, - {"matrix": [4, 5], "x": 16.5, "y": 0, "w": 0.5}, {"matrix": [1, 0], "x": 0, "y": 1, "w": 1.5}, {"matrix": [1, 1], "x": 1.5, "y": 1}, diff --git a/keyboards/meletrix/zoom65_lite/keymaps/default/keymap.c b/keyboards/meletrix/zoom65_lite/keymaps/default/keymap.c index 9d9aa67557..b96eff2257 100644 --- a/keyboards/meletrix/zoom65_lite/keymaps/default/keymap.c +++ b/keyboards/meletrix/zoom65_lite/keymaps/default/keymap.c @@ -18,14 +18,14 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { [0] = LAYOUT_all( - KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_BSPC, KC_VOLU, KC_MUTE, KC_VOLD, + KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_BSPC, KC_MUTE, KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_DEL, KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, KC_PGUP, KC_LSFT, KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_UP, KC_END, KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_SPC, KC_SPC, KC_RALT, MO(1), KC_LEFT, KC_DOWN, KC_RGHT ), [1] = LAYOUT_all( - KC_GRV, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, _______, _______, KC_MNXT, KC_MPLY, KC_MPRV, + KC_GRV, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, _______, _______, KC_MPLY, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, QK_BOOT, diff --git a/keyboards/meletrix/zoom65_lite/keymaps/via/keymap.c b/keyboards/meletrix/zoom65_lite/keymaps/via/keymap.c index 4adfaba69d..f593d408d5 100644 --- a/keyboards/meletrix/zoom65_lite/keymaps/via/keymap.c +++ b/keyboards/meletrix/zoom65_lite/keymaps/via/keymap.c @@ -16,78 +16,42 @@ #include QMK_KEYBOARD_H -static uint8_t encoder_state[NUM_ENCODERS] = {0}; -static keypos_t encoder_cw[NUM_ENCODERS] = ENCODERS_CW_KEY; -static keypos_t encoder_ccw[NUM_ENCODERS] = ENCODERS_CCW_KEY; - -void encoder_action_unregister(void) -{ - for (int index = 0; index < NUM_ENCODERS; ++index) - { - if (encoder_state[index]) - { - keyevent_t encoder_event = (keyevent_t){ - .key = encoder_state[index] >> 1 ? encoder_cw[index] : encoder_ccw[index], - .pressed = false, - .time = timer_read(), - .type = KEY_EVENT - }; - encoder_state[index] = 0; - action_exec(encoder_event); - } - } -} -void encoder_action_register(uint8_t index, bool clockwise) -{ - keyevent_t encoder_event = (keyevent_t){ - .key = clockwise ? encoder_cw[index] : encoder_ccw[index], - .pressed = true, - .time = timer_read(), - .type = KEY_EVENT - }; - encoder_state[index] = (clockwise ^ 1) | (clockwise << 1); - action_exec(encoder_event); -} - -void matrix_scan_kb(void) -{ - encoder_action_unregister(); - matrix_scan_user(); -} - -bool encoder_update_kb(uint8_t index, bool clockwise) -{ - encoder_action_register(index, clockwise); - return true; -} - const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { [0] = LAYOUT_all( - KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_BSPC, KC_VOLU, KC_MUTE, KC_VOLD, + KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_BSPC, KC_MUTE, KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_DEL, KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, KC_PGUP, KC_LSFT, KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_UP, KC_END, KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_SPC, KC_SPC, KC_RALT, MO(1), KC_LEFT, KC_DOWN, KC_RGHT ), [1] = LAYOUT_all( - KC_GRV, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, _______, _______, KC_MNXT, KC_MPLY, KC_MPRV, + KC_GRV, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, _______, _______, KC_MPLY, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, QK_BOOT, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______ ), [2] = LAYOUT_all( - _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______ ), [3] = LAYOUT_all( - _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______ ), }; + +#ifdef ENCODER_MAP_ENABLE +const uint16_t PROGMEM encoder_map[][NUM_ENCODERS][NUM_DIRECTIONS] = { + [0] = { ENCODER_CCW_CW(KC_VOLD, KC_VOLU) }, + [1] = { ENCODER_CCW_CW(KC_MPRV, KC_MNXT) }, + [2] = { ENCODER_CCW_CW(_______, _______) }, + [3] = { ENCODER_CCW_CW(_______, _______) }, +}; +#endif diff --git a/keyboards/meletrix/zoom65_lite/keymaps/via/rules.mk b/keyboards/meletrix/zoom65_lite/keymaps/via/rules.mk index 43061db1dd..1189f4ad19 100644 --- a/keyboards/meletrix/zoom65_lite/keymaps/via/rules.mk +++ b/keyboards/meletrix/zoom65_lite/keymaps/via/rules.mk @@ -1,2 +1,3 @@ VIA_ENABLE = yes -LTO_ENABLE = yes
\ No newline at end of file +LTO_ENABLE = yes +ENCODER_MAP_ENABLE = yes diff --git a/keyboards/meletrix/zoom87/config.h b/keyboards/meletrix/zoom87/config.h index 3cc2858e75..f5f2f63bb7 100644 --- a/keyboards/meletrix/zoom87/config.h +++ b/keyboards/meletrix/zoom87/config.h @@ -16,11 +16,6 @@ #pragma once - #define RGBLED_NUM 20 - #define RGBLIGHT_HUE_STEP 8 - #define RGBLIGHT_SAT_STEP 8 - #define RGBLIGHT_VAL_STEP 8 - #define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */ /*======= RGB function=======*/ #define RGBLIGHT_EFFECT_BREATHING #define RGBLIGHT_EFFECT_RAINBOW_MOOD diff --git a/keyboards/meletrix/zoom87/info.json b/keyboards/meletrix/zoom87/info.json index be54c6ccd3..126d2391dc 100644 --- a/keyboards/meletrix/zoom87/info.json +++ b/keyboards/meletrix/zoom87/info.json @@ -21,7 +21,11 @@ "pin": "D2" }, "rgblight": { - "max_brightness": 200 + "saturation_steps": 8, + "brightness_steps": 8, + "led_count": 20, + "max_brightness": 200, + "sleep": true }, "processor": "atmega32u4", "bootloader": "atmel-dfu", diff --git a/keyboards/melgeek/mj6xy/rev3/config.h b/keyboards/melgeek/mj6xy/rev3/config.h index dbe73b7e3d..415fc3f2aa 100755 --- a/keyboards/melgeek/mj6xy/rev3/config.h +++ b/keyboards/melgeek/mj6xy/rev3/config.h @@ -28,8 +28,3 @@ # define RGBLIGHT_EFFECT_TWINKLE # define RGBLIGHT_DEFAULT_MODE (RGBLIGHT_EFFECT_RAINBOW_MOOD + 6) # define RGBLIGHT_DEFAULT_SPD 10 -# define RGBLED_NUM 16 -# define RGBLIGHT_HUE_STEP 8 -# define RGBLIGHT_SAT_STEP 8 -# define RGBLIGHT_VAL_STEP 8 -# define RGBLIGHT_SLEEP diff --git a/keyboards/melgeek/mj6xy/rev3/info.json b/keyboards/melgeek/mj6xy/rev3/info.json index 5dd66001c5..3b5c7375a4 100644 --- a/keyboards/melgeek/mj6xy/rev3/info.json +++ b/keyboards/melgeek/mj6xy/rev3/info.json @@ -9,6 +9,12 @@ "pin": "B7", "levels": 10 }, + "rgblight": { + "saturation_steps": 8, + "brightness_steps": 8, + "led_count": 16, + "sleep": true + }, "ws2812": { "pin": "C6" } diff --git a/keyboards/meow48/config.h b/keyboards/meow48/config.h index 2cd54cde39..8da2936ace 100644 --- a/keyboards/meow48/config.h +++ b/keyboards/meow48/config.h @@ -19,12 +19,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #define OLED_BRIGHTNESS 100 - #define RGBLED_NUM 48 - #define RGBLIGHT_HUE_STEP 8 - #define RGBLIGHT_SAT_STEP 8 - #define RGBLIGHT_VAL_STEP 8 - #define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */ - /*== all animations enable ==*/ #define RGBLIGHT_EFFECT_BREATHING #define RGBLIGHT_EFFECT_RAINBOW_MOOD diff --git a/keyboards/meow48/info.json b/keyboards/meow48/info.json index b5d80286c7..9b498d63c3 100644 --- a/keyboards/meow48/info.json +++ b/keyboards/meow48/info.json @@ -12,7 +12,11 @@ "pin": "D3" }, "rgblight": { - "max_brightness": 100 + "saturation_steps": 8, + "brightness_steps": 8, + "led_count": 48, + "max_brightness": 100, + "sleep": true }, "matrix_pins": { "cols": ["F6", "F7", "B1", "B3", "B2", "B6"], diff --git a/keyboards/merge/uc1/config.h b/keyboards/merge/uc1/config.h index 945f753599..28c5cab153 100644 --- a/keyboards/merge/uc1/config.h +++ b/keyboards/merge/uc1/config.h @@ -16,7 +16,6 @@ #pragma once -#define RGBLED_NUM 12 #define RGBLIGHT_EFFECT_BREATHING #define RGBLIGHT_EFFECT_RAINBOW_MOOD #define RGBLIGHT_EFFECT_RAINBOW_SWIRL @@ -27,7 +26,3 @@ #define RGBLIGHT_EFFECT_RGB_TEST #define RGBLIGHT_EFFECT_ALTERNATING #define RGBLIGHT_EFFECT_TWINKLE -#define RGBLIGHT_HUE_STEP 10 -#define RGBLIGHT_SAT_STEP 10 -#define RGBLIGHT_VAL_STEP 10 -#define RGBLIGHT_SLEEP diff --git a/keyboards/merge/uc1/info.json b/keyboards/merge/uc1/info.json index 95de5a2e20..6d3febd0c4 100644 --- a/keyboards/merge/uc1/info.json +++ b/keyboards/merge/uc1/info.json @@ -8,6 +8,13 @@ "pid": "0x5543", "device_version": "0.0.1" }, + "rgblight": { + "hue_steps": 10, + "saturation_steps": 10, + "brightness_steps": 10, + "led_count": 12, + "sleep": true + }, "ws2812": { "pin": "B5" }, diff --git a/keyboards/merge/um70/config.h b/keyboards/merge/um70/config.h index bbc2f5b5fb..04569dc989 100644 --- a/keyboards/merge/um70/config.h +++ b/keyboards/merge/um70/config.h @@ -20,14 +20,10 @@ #define MASTER_LEFT #define SPLIT_MODS_ENABLE -#define RGBLIGHT_SPLIT -#define RGBLED_NUM 83 -#define RGBLED_SPLIT { 39, 44 } #ifdef RGB_MATRIX_ENABLE -# define RGB_MATRIX_LED_COUNT RGBLED_NUM -# define RGB_MATRIX_SPLIT RGBLED_SPLIT +# define RGB_MATRIX_LED_COUNT 83 +# define RGB_MATRIX_SPLIT { 39, 44 } #endif -#define RGBLIGHT_SLEEP #define B6_AUDIO diff --git a/keyboards/merge/um70/info.json b/keyboards/merge/um70/info.json index 84f44ba6d1..95f3bb1cea 100644 --- a/keyboards/merge/um70/info.json +++ b/keyboards/merge/um70/info.json @@ -25,7 +25,10 @@ "pin": "D3" }, "rgblight": { - "max_brightness": 150 + "led_count": 83, + "max_brightness": 150, + "sleep": true, + "split_count": [39, 44] }, "processor": "atmega32u4", "bootloader": "atmel-dfu", diff --git a/keyboards/merge/um80/config.h b/keyboards/merge/um80/config.h index 84b23cd33b..70a5d7ba59 100644 --- a/keyboards/merge/um80/config.h +++ b/keyboards/merge/um80/config.h @@ -20,14 +20,10 @@ #define MASTER_LEFT #define SPLIT_MODS_ENABLE -#define RGBLIGHT_SPLIT -#define RGBLED_NUM 100 -#define RGBLED_SPLIT { 48, 52 } #ifdef RGB_MATRIX_ENABLE -# define RGB_MATRIX_LED_COUNT RGBLED_NUM -# define RGB_MATRIX_SPLIT RGBLED_SPLIT +# define RGB_MATRIX_LED_COUNT 100 +# define RGB_MATRIX_SPLIT { 48, 52 } #endif -#define RGBLIGHT_SLEEP #define AUDIO_PIN B6 diff --git a/keyboards/merge/um80/info.json b/keyboards/merge/um80/info.json index 2223b3d4c0..554d1997a3 100644 --- a/keyboards/merge/um80/info.json +++ b/keyboards/merge/um80/info.json @@ -25,7 +25,10 @@ "pin": "D3" }, "rgblight": { - "max_brightness": 120 + "led_count": 100, + "max_brightness": 120, + "sleep": true, + "split_count": [48, 52] }, "processor": "atmega32u4", "bootloader": "atmel-dfu", diff --git a/keyboards/meson/config.h b/keyboards/meson/config.h index e89409d477..da5125a996 100644 --- a/keyboards/meson/config.h +++ b/keyboards/meson/config.h @@ -19,13 +19,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #define USE_I2C - #define RGBLED_NUM 10 - #define RGBLIGHT_SPLIT - #define RGBLED_SPLIT { 5, 5 } - #define RGBLIGHT_HUE_STEP 8 - #define RGBLIGHT_SAT_STEP 8 - #define RGBLIGHT_VAL_STEP 8 - #define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */ #define RGBLIGHT_EFFECT_BREATHING #define RGBLIGHT_EFFECT_RAINBOW_MOOD #define RGBLIGHT_EFFECT_RAINBOW_SWIRL diff --git a/keyboards/meson/info.json b/keyboards/meson/info.json index 62aa154c0b..aad657ace5 100644 --- a/keyboards/meson/info.json +++ b/keyboards/meson/info.json @@ -15,6 +15,13 @@ "split": { "soft_serial_pin": "D0" }, + "rgblight": { + "saturation_steps": 8, + "brightness_steps": 8, + "led_count": 10, + "sleep": true, + "split_count": [5, 5] + }, "ws2812": { "pin": "B5" }, diff --git a/keyboards/mexsistor/ludmila/config.h b/keyboards/mexsistor/ludmila/config.h index 8d8aaed5c7..8596b47af3 100644 --- a/keyboards/mexsistor/ludmila/config.h +++ b/keyboards/mexsistor/ludmila/config.h @@ -38,8 +38,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. /* COL2ROW, ROW2COL */ #define DIODE_DIRECTION COL2ROW -#define RGBLED_NUM 4 -#define RGBLIGHT_SLEEP #define RGBLIGHT_EFFECT_BREATHING #define RGBLIGHT_EFFECT_RAINBOW_MOOD #define RGBLIGHT_EFFECT_RAINBOW_SWIRL diff --git a/keyboards/mexsistor/ludmila/info.json b/keyboards/mexsistor/ludmila/info.json index fcfecd0fd7..a270e76ade 100644 --- a/keyboards/mexsistor/ludmila/info.json +++ b/keyboards/mexsistor/ludmila/info.json @@ -13,6 +13,10 @@ {"pin_a": "F6", "pin_b": "F5"} ] }, + "rgblight": { + "led_count": 4, + "sleep": true + }, "ws2812": { "pin": "D1" }, diff --git a/keyboards/mincedshon/ecila/config.h b/keyboards/mincedshon/ecila/config.h index 0b3c4eb59a..69493aadfb 100644 --- a/keyboards/mincedshon/ecila/config.h +++ b/keyboards/mincedshon/ecila/config.h @@ -13,8 +13,3 @@ #define RGBLIGHT_EFFECT_RGB_TEST #define RGBLIGHT_EFFECT_ALTERNATING #define RGBLIGHT_EFFECT_TWINKLE -#define RGBLED_NUM 6 -#define RGBLIGHT_HUE_STEP 8 -#define RGBLIGHT_SAT_STEP 8 -#define RGBLIGHT_VAL_STEP 8 -#define RGBLIGHT_SLEEP diff --git a/keyboards/mincedshon/ecila/info.json b/keyboards/mincedshon/ecila/info.json index 9ca79d2186..fbe46999b5 100644 --- a/keyboards/mincedshon/ecila/info.json +++ b/keyboards/mincedshon/ecila/info.json @@ -11,7 +11,11 @@ "pin": "B0" }, "rgblight": { - "max_brightness": 150 + "saturation_steps": 8, + "brightness_steps": 8, + "led_count": 6, + "max_brightness": 150, + "sleep": true }, "bootloader": "atmel-dfu", "features": { diff --git a/keyboards/miniaxe/config.h b/keyboards/miniaxe/config.h index 8d0955d769..7ac79dcc6f 100644 --- a/keyboards/miniaxe/config.h +++ b/keyboards/miniaxe/config.h @@ -28,10 +28,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #define RGBLIGHT_EFFECT_RGB_TEST #define RGBLIGHT_EFFECT_ALTERNATING #define RGBLIGHT_EFFECT_TWINKLE -#define RGBLED_NUM 6 -#define RGBLIGHT_HUE_STEP 8 -#define RGBLIGHT_SAT_STEP 8 -#define RGBLIGHT_VAL_STEP 8 /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ #define LOCKING_SUPPORT_ENABLE diff --git a/keyboards/miniaxe/info.json b/keyboards/miniaxe/info.json index 6f6c68d8d0..3760528ffc 100644 --- a/keyboards/miniaxe/info.json +++ b/keyboards/miniaxe/info.json @@ -11,6 +11,11 @@ "split": { "soft_serial_pin": "D0" }, + "rgblight": { + "saturation_steps": 8, + "brightness_steps": 8, + "led_count": 6 + }, "ws2812": { "pin": "F4" }, diff --git a/keyboards/minimacro5/config.h b/keyboards/minimacro5/config.h index 317e150935..935f89491e 100644 --- a/keyboards/minimacro5/config.h +++ b/keyboards/minimacro5/config.h @@ -17,9 +17,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #pragma once -//speed for double tap -#define TAPPING_TERM 200 - /* ws2812 RGB LED */ #define RGBLIGHT_EFFECT_BREATHING #define RGBLIGHT_EFFECT_RAINBOW_MOOD @@ -31,4 +28,3 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #define RGBLIGHT_EFFECT_RGB_TEST #define RGBLIGHT_EFFECT_ALTERNATING #define RGBLIGHT_EFFECT_TWINKLE -#define RGBLED_NUM 5 // Number of LEDs diff --git a/keyboards/minimacro5/info.json b/keyboards/minimacro5/info.json index e417a689ae..a48527ee08 100644 --- a/keyboards/minimacro5/info.json +++ b/keyboards/minimacro5/info.json @@ -8,6 +8,9 @@ "pid": "0x0007", "device_version": "0.0.1" }, + "rgblight": { + "led_count": 5 + }, "ws2812": { "pin": "B5" }, diff --git a/keyboards/minimon/index_tab/config.h b/keyboards/minimon/index_tab/config.h index 1d1616ee25..8d555dcf9f 100644 --- a/keyboards/minimon/index_tab/config.h +++ b/keyboards/minimon/index_tab/config.h @@ -21,9 +21,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. /* Locking resynchronize hack */ #define LOCKING_RESYNC_ENABLE -#define RGBLED_NUM 10 -#define RGBLIGHT_SLEEP - #define RGBLIGHT_EFFECT_BREATHING #define RGBLIGHT_EFFECT_RAINBOW_MOOD #define RGBLIGHT_EFFECT_RAINBOW_SWIRL diff --git a/keyboards/minimon/index_tab/info.json b/keyboards/minimon/index_tab/info.json index c386795024..0e60aa1327 100644 --- a/keyboards/minimon/index_tab/info.json +++ b/keyboards/minimon/index_tab/info.json @@ -9,6 +9,10 @@ "pid": "0x1306", "device_version": "0.0.1" }, + "rgblight": { + "led_count": 10, + "sleep": true + }, "ws2812": { "pin": "E6" }, diff --git a/keyboards/mino_plus/hotswap/config.h b/keyboards/mino_plus/hotswap/config.h new file mode 100644 index 0000000000..b8c0007938 --- /dev/null +++ b/keyboards/mino_plus/hotswap/config.h @@ -0,0 +1,15 @@ +// Copyright 2023 ShandonCodes (@ShandonCodes) +// SPDX-License-Identifier: GPL-2.0-or-later +#pragma once + +#define I2C_DRIVER I2CD1 +#define I2C1_SCL_PIN B6 +#define I2C1_SDA_PIN B7 +#define I2C1_SCL_PAL_MODE 1 +#define I2C1_SDA_PAL_MODE 1 +#define I2C1_TIMINGR_PRESC 0x00U +#define I2C1_TIMINGR_SCLDEL 0x03U +#define I2C1_TIMINGR_SDADEL 0x01U +#define I2C1_TIMINGR_SCLH 0x03U +#define I2C1_TIMINGR_SCLL 0x09U + diff --git a/keyboards/mino_plus/hotswap/halconf.h b/keyboards/mino_plus/hotswap/halconf.h new file mode 100644 index 0000000000..fb8ce45220 --- /dev/null +++ b/keyboards/mino_plus/hotswap/halconf.h @@ -0,0 +1,7 @@ +// Copyright 2023 ShandonCodes (@ShandonCodes) +// SPDX-License-Identifier: GPL-2.0-or-later +#pragma once + +#define HAL_USE_I2C TRUE + +#include_next <halconf.h> diff --git a/keyboards/mino_plus/hotswap/hotswap.c b/keyboards/mino_plus/hotswap/hotswap.c new file mode 100644 index 0000000000..a5920b2617 --- /dev/null +++ b/keyboards/mino_plus/hotswap/hotswap.c @@ -0,0 +1,8 @@ +// Copyright 2023 ShandonCodes (@ShandonCodes) +// SPDX-License-Identifier: GPL-2.0-or-later +#include "quantum.h" + +void board_init(void) { + SYSCFG->CFGR1 |= SYSCFG_CFGR1_I2C1_DMA_RMP; + SYSCFG->CFGR1 &= ~(SYSCFG_CFGR1_SPI2_DMA_RMP); +}
\ No newline at end of file diff --git a/keyboards/mino_plus/hotswap/info.json b/keyboards/mino_plus/hotswap/info.json new file mode 100644 index 0000000000..b7cda6d71f --- /dev/null +++ b/keyboards/mino_plus/hotswap/info.json @@ -0,0 +1,100 @@ +{ + "manufacturer": "ShandonCodes", + "keyboard_name": "Mino Plus (Hotswap)", + "maintainer": "ShandonCodes", + "bootloader": "stm32-dfu", + "diode_direction": "COL2ROW", + "features": { + "bootmagic": true, + "command": false, + "console": false, + "extrakey": true, + "mousekey": true, + "nkro": true + }, + "matrix_pins": { + "cols": ["B12", "A15", "B3", "B2", "B0", "A7", "A5", "A4", "A3", "A2", "A1", "F1", "A0", "A8", "A10"], + "rows": ["B14", "B10", "F0", "C15", "C14"] + }, + "processor": "STM32F072", + "url": "", + "usb": { + "device_version": "1.0.0", + "pid": "0x0004", + "vid": "0x7877" + }, + "layouts": { + "LAYOUT": { + "layout": [ + {"label": "Esc", "matrix": [0, 0], "x": 0, "y": 0}, + {"label": "1", "matrix": [0, 1], "x": 1, "y": 0}, + {"label": "2", "matrix": [0, 2], "x": 2, "y": 0}, + {"label": "3", "matrix": [0, 3], "x": 3, "y": 0}, + {"label": "4", "matrix": [0, 4], "x": 4, "y": 0}, + {"label": "5", "matrix": [0, 5], "x": 5, "y": 0}, + {"label": "6", "matrix": [0, 6], "x": 6, "y": 0}, + {"label": "7", "matrix": [0, 7], "x": 7, "y": 0}, + {"label": "8", "matrix": [0, 8], "x": 8, "y": 0}, + {"label": "9", "matrix": [0, 9], "x": 9, "y": 0}, + {"label": "0", "matrix": [0, 10], "x": 10, "y": 0}, + {"label": "_", "matrix": [0, 11], "x": 11, "y": 0}, + {"label": "+", "matrix": [0, 12], "x": 12, "y": 0}, + {"label": "Backspace", "matrix": [0, 13], "x": 13, "y": 0, "w": 2}, + {"label": "Del", "matrix": [0, 14], "x": 14, "y": 0}, + {"label": "Tab", "matrix": [1, 0], "x": 0, "y": 1, "w": 1.5}, + {"label": "Q", "matrix": [1, 1], "x": 1.5, "y": 1}, + {"label": "W", "matrix": [1, 2], "x": 2.5, "y": 1}, + {"label": "E", "matrix": [1, 3], "x": 3.5, "y": 1}, + {"label": "R", "matrix": [1, 4], "x": 4.5, "y": 1}, + {"label": "T", "matrix": [1, 5], "x": 5.5, "y": 1}, + {"label": "Y", "matrix": [1, 6], "x": 6.5, "y": 1}, + {"label": "U", "matrix": [1, 7], "x": 7.5, "y": 1}, + {"label": "I", "matrix": [1, 8], "x": 8.5, "y": 1}, + {"label": "O", "matrix": [1, 9], "x": 9.5, "y": 1}, + {"label": "P", "matrix": [1, 10], "x": 10.5, "y": 1}, + {"label": "{", "matrix": [1, 11], "x": 11.5, "y": 1}, + {"label": "}", "matrix": [1, 12], "x": 12.5, "y": 1}, + {"label": "|", "matrix": [1, 13], "x": 13.5, "y": 1, "w": 1.5}, + {"label": "Ins", "matrix": [1, 14], "x": 15, "y": 1}, + {"label": "Caps", "matrix": [2, 0], "x": 0, "y": 2, "w": 1.75}, + {"label": "A", "matrix": [2, 1], "x": 1.75, "y": 2}, + {"label": "S", "matrix": [2, 2], "x": 2.75, "y": 2}, + {"label": "D", "matrix": [2, 3], "x": 3.75, "y": 2}, + {"label": "F", "matrix": [2, 4], "x": 4.75, "y": 2}, + {"label": "G", "matrix": [2, 5], "x": 5.75, "y": 2}, + {"label": "H", "matrix": [2, 6], "x": 6.75, "y": 2}, + {"label": "J", "matrix": [2, 7], "x": 7.75, "y": 2}, + {"label": "K", "matrix": [2, 8], "x": 8.75, "y": 2}, + {"label": "L", "matrix": [2, 9], "x": 9.75, "y": 2}, + {"label": ":", "matrix": [2, 10], "x": 10.75, "y": 2}, + {"label": "'", "matrix": [2, 11], "x": 10.75, "y": 2}, + {"label": "Enter", "matrix": [2, 12], "x": 12.75, "y": 2, "w": 2.25}, + {"label": "Pgup", "matrix": [2, 14], "x": 14, "y": 2}, + {"label": "Shift", "matrix": [3, 0], "x": 0, "y": 3, "w": 2.25}, + {"label": "Z", "matrix": [3, 1], "x": 2.25, "y": 3}, + {"label": "X", "matrix": [3, 2], "x": 3.25, "y": 3}, + {"label": "C", "matrix": [3, 3], "x": 4.25, "y": 3}, + {"label": "V", "matrix": [3, 4], "x": 5.25, "y": 3}, + {"label": "B", "matrix": [3, 5], "x": 6.25, "y": 3}, + {"label": "N", "matrix": [3, 6], "x": 7.25, "y": 3}, + {"label": "M", "matrix": [3, 7], "x": 8.25, "y": 3}, + {"label": ",", "matrix": [3, 8], "x": 9.25, "y": 3}, + {"label": ".", "matrix": [3, 9], "x": 10.25, "y": 3}, + {"label": "/", "matrix": [3, 10], "x": 11.25, "y": 3}, + {"label": "Shift", "matrix": [3, 11], "x": 12.25, "y": 3, "w": 1.75}, + {"label": "Up", "matrix": [3, 12], "x": 14, "y": 3}, + {"label": "Pgdn", "matrix": [3, 14], "x": 15, "y": 3}, + {"label": "Ctrl", "matrix": [4, 0], "x": 0, "y": 4, "w": 1.25}, + {"label": "Super", "matrix": [4, 1], "x": 1.25, "y": 4, "w": 1.25}, + {"label": "Alt", "matrix": [4, 2], "x": 2.5, "y": 4, "w": 1.25}, + {"label": "Space", "matrix": [4, 5], "x": 3.75, "y": 4, "w": 6.25}, + {"label": "Meta", "matrix": [4, 9], "x": 10, "y": 4}, + {"label": "Win", "matrix": [4, 10], "x": 11, "y": 4}, + {"label": "Ctrl", "matrix": [4, 11], "x": 12, "y": 4}, + {"label": "Left", "matrix": [4, 12], "x": 13, "y": 4}, + {"label": "Down", "matrix": [4, 13], "x": 14, "y": 4}, + {"label": "Right", "matrix": [4, 14], "x": 15, "y": 4} + ] + } + } +} diff --git a/keyboards/mino_plus/hotswap/keymaps/default/keymap.c b/keyboards/mino_plus/hotswap/keymaps/default/keymap.c new file mode 100644 index 0000000000..f068c66215 --- /dev/null +++ b/keyboards/mino_plus/hotswap/keymaps/default/keymap.c @@ -0,0 +1,21 @@ +// Copyright 2023 ShandonCodes (@ShandonCodes) +// SPDX-License-Identifier: GPL-2.0-or-later +#include QMK_KEYBOARD_H + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + /* Base */ + [0] = LAYOUT( + KC_ESCAPE, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_GRV, + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_DEL, + KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENTER, KC_PGUP, + KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMMA, KC_DOT, KC_SLASH, KC_RSFT, KC_UP, KC_PGDN, + KC_LCTL, KC_LGUI, KC_LALT, KC_SPACE, MO(1), KC_RGUI, KC_RCTL, KC_LEFT, KC_DOWN, KC_RIGHT + ), + [1] = LAYOUT( + KC_GRV, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, QK_BOOT, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS + ) +};
\ No newline at end of file diff --git a/keyboards/mino_plus/hotswap/keymaps/via/keymap.c b/keyboards/mino_plus/hotswap/keymaps/via/keymap.c new file mode 100644 index 0000000000..901adcb3d2 --- /dev/null +++ b/keyboards/mino_plus/hotswap/keymaps/via/keymap.c @@ -0,0 +1,22 @@ +// Copyright 2023 ShandonCodes (@ShandonCodes) +// SPDX-License-Identifier: GPL-2.0-or-later +#include QMK_KEYBOARD_H + + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + /* Base */ + [0] = LAYOUT( + KC_ESCAPE, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_GRV, + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_DEL, + KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENTER, KC_PGUP, + KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMMA, KC_DOT, KC_SLASH, KC_RSFT, KC_UP, KC_PGDN, + KC_LCTL, KC_LGUI, KC_LALT, KC_SPACE, MO(1), KC_RGUI, KC_RCTL, KC_LEFT, KC_DOWN, KC_RIGHT + ), + [1] = LAYOUT( + KC_GRV, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, QK_BOOT, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS + ) +};
\ No newline at end of file diff --git a/keyboards/mino_plus/keymaps/via/rules.mk b/keyboards/mino_plus/hotswap/keymaps/via/rules.mk index 036bd6d1c3..036bd6d1c3 100644 --- a/keyboards/mino_plus/keymaps/via/rules.mk +++ b/keyboards/mino_plus/hotswap/keymaps/via/rules.mk diff --git a/keyboards/mino_plus/hotswap/mcuconf.h b/keyboards/mino_plus/hotswap/mcuconf.h new file mode 100644 index 0000000000..7b8a66123e --- /dev/null +++ b/keyboards/mino_plus/hotswap/mcuconf.h @@ -0,0 +1,8 @@ +// Copyright 2023 ShandonCodes (@ShandonCodes) +// SPDX-License-Identifier: GPL-2.0-or-later +#pragma once + +#include_next <mcuconf.h> + +#undef STM32_I2C_USE_I2C1 +#define STM32_I2C_USE_I2C1 TRUE
\ No newline at end of file diff --git a/keyboards/mino_plus/hotswap/rules.mk b/keyboards/mino_plus/hotswap/rules.mk new file mode 100644 index 0000000000..842350f40e --- /dev/null +++ b/keyboards/mino_plus/hotswap/rules.mk @@ -0,0 +1,3 @@ +OLED_ENABLE = yes +WPM_ENABLE = yes +OLED_DRIVER = SSD1306
\ No newline at end of file diff --git a/keyboards/mino_plus/mino_plus.c b/keyboards/mino_plus/mino_plus.c index 62434016f7..cd651b6d17 100644 --- a/keyboards/mino_plus/mino_plus.c +++ b/keyboards/mino_plus/mino_plus.c @@ -1,4 +1,4 @@ -// Copyright 2022 ShandonCodes (@ShandonCodes) +// Copyright 2023 ShandonCodes (@ShandonCodes) // SPDX-License-Identifier: GPL-2.0-or-later #include "quantum.h" diff --git a/keyboards/mino_plus/readme.md b/keyboards/mino_plus/readme.md index 0730e30d63..0a85b6dc58 100644 --- a/keyboards/mino_plus/readme.md +++ b/keyboards/mino_plus/readme.md @@ -11,10 +11,12 @@ A 65% keyboard, inspried by tetrominos. Make example for this keyboard (after setting up your build environment): make mino_plus/soldered:default + make mino_plus/hotswap:default Flashing example for this keyboard: make mino_plus/soldered:default:flash + make mino_plus/hotswap:default:flash See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). diff --git a/keyboards/mino_plus/keymaps/default/keymap.c b/keyboards/mino_plus/soldered/keymaps/default/keymap.c index 365f31440a..365f31440a 100644 --- a/keyboards/mino_plus/keymaps/default/keymap.c +++ b/keyboards/mino_plus/soldered/keymaps/default/keymap.c diff --git a/keyboards/mino_plus/keymaps/via/keymap.c b/keyboards/mino_plus/soldered/keymaps/via/keymap.c index 2a7e816e36..2a7e816e36 100644 --- a/keyboards/mino_plus/keymaps/via/keymap.c +++ b/keyboards/mino_plus/soldered/keymaps/via/keymap.c diff --git a/keyboards/mino_plus/soldered/keymaps/via/rules.mk b/keyboards/mino_plus/soldered/keymaps/via/rules.mk new file mode 100644 index 0000000000..036bd6d1c3 --- /dev/null +++ b/keyboards/mino_plus/soldered/keymaps/via/rules.mk @@ -0,0 +1 @@ +VIA_ENABLE = yes
\ No newline at end of file diff --git a/keyboards/mint60/config.h b/keyboards/mint60/config.h index 41c0f7e8eb..b10dbd854a 100644 --- a/keyboards/mint60/config.h +++ b/keyboards/mint60/config.h @@ -22,12 +22,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. /* Locking resynchronize hack */ #define LOCKING_RESYNC_ENABLE -#define RGBLED_NUM 8 -#define RGBLIGHT_SPLIT - -#define RGBLIGHT_HUE_STEP 10 -#define RGBLIGHT_SAT_STEP 17 - #define RGBLIGHT_EFFECT_BREATHING #define RGBLIGHT_EFFECT_RAINBOW_MOOD #define RGBLIGHT_EFFECT_RAINBOW_SWIRL diff --git a/keyboards/mint60/info.json b/keyboards/mint60/info.json index bd51052853..e7dc82f1b5 100644 --- a/keyboards/mint60/info.json +++ b/keyboards/mint60/info.json @@ -16,6 +16,11 @@ "split": { "soft_serial_pin": "D2" }, + "rgblight": { + "hue_steps": 10, + "led_count": 8, + "split": true + }, "ws2812": { "pin": "D3" }, diff --git a/keyboards/misonoworks/chocolatebar/config.h b/keyboards/misonoworks/chocolatebar/config.h index 55e57fb872..3f7b2a040f 100644 --- a/keyboards/misonoworks/chocolatebar/config.h +++ b/keyboards/misonoworks/chocolatebar/config.h @@ -17,7 +17,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #pragma once -#define RGBLED_NUM 12 #define RGBLIGHT_EFFECT_BREATHING #define RGBLIGHT_EFFECT_RAINBOW_MOOD #define RGBLIGHT_EFFECT_RAINBOW_SWIRL diff --git a/keyboards/misonoworks/chocolatebar/info.json b/keyboards/misonoworks/chocolatebar/info.json index 65087ac481..09a0c094e5 100644 --- a/keyboards/misonoworks/chocolatebar/info.json +++ b/keyboards/misonoworks/chocolatebar/info.json @@ -9,6 +9,9 @@ "device_version": "0.0.1", "force_nkro": true }, + "rgblight": { + "led_count": 12 + }, "ws2812": { "pin": "B1" }, diff --git a/keyboards/misonoworks/karina/config.h b/keyboards/misonoworks/karina/config.h index eba5475d83..6ce2c3a706 100644 --- a/keyboards/misonoworks/karina/config.h +++ b/keyboards/misonoworks/karina/config.h @@ -23,7 +23,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. /* Locking resynchronize hack */ #define LOCKING_RESYNC_ENABLE -#define RGBLED_NUM 19 #define RGBLIGHT_EFFECT_BREATHING #define RGBLIGHT_EFFECT_RAINBOW_MOOD #define RGBLIGHT_EFFECT_RAINBOW_SWIRL diff --git a/keyboards/misonoworks/karina/info.json b/keyboards/misonoworks/karina/info.json index 2fc140cba6..2b3d9230bd 100644 --- a/keyboards/misonoworks/karina/info.json +++ b/keyboards/misonoworks/karina/info.json @@ -9,6 +9,9 @@ "device_version": "0.0.1", "force_nkro": true }, + "rgblight": { + "led_count": 19 + }, "ws2812": { "pin": "D1" }, diff --git a/keyboards/misterknife/knife66/config.h b/keyboards/misterknife/knife66/config.h index 167cffb914..ba0d2a67c3 100644 --- a/keyboards/misterknife/knife66/config.h +++ b/keyboards/misterknife/knife66/config.h @@ -27,11 +27,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #define RGBLIGHT_EFFECT_RGB_TEST #define RGBLIGHT_EFFECT_ALTERNATING #define RGBLIGHT_EFFECT_TWINKLE -#define RGBLIGHT_SLEEP -#define RGBLED_NUM 6 -#define RGBLIGHT_HUE_STEP 8 -#define RGBLIGHT_SAT_STEP 8 -#define RGBLIGHT_VAL_STEP 8 #define WS2812_PWM_DRIVER PWMD1 // default: PWMD1 #define WS2812_PWM_CHANNEL 2 // default: 2 diff --git a/keyboards/misterknife/knife66/info.json b/keyboards/misterknife/knife66/info.json index d0ecc011bf..b3de97cfb2 100644 --- a/keyboards/misterknife/knife66/info.json +++ b/keyboards/misterknife/knife66/info.json @@ -13,7 +13,11 @@ "driver": "pwm" }, "rgblight": { - "max_brightness": 200 + "saturation_steps": 8, + "brightness_steps": 8, + "led_count": 6, + "max_brightness": 200, + "sleep": true }, "matrix_pins": { "cols": ["B2", "B1", "B0", "A7", "A6", "A5", "A4", "B9", "B8", "B7", "B6", "B5", "B4", "B3", "A15"], diff --git a/keyboards/misterknife/knife66/rules.mk b/keyboards/misterknife/knife66/rules.mk index 0f15f10b20..0098dc473a 100644 --- a/keyboards/misterknife/knife66/rules.mk +++ b/keyboards/misterknife/knife66/rules.mk @@ -11,5 +11,3 @@ BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality RGBLIGHT_ENABLE = yes # Enable keyboard RGB underglow AUDIO_ENABLE = no # Audio output -# Enter lower-power sleep mode when on the ChibiOS idle thread -OPT_DEFS += -DCORTEX_ENABLE_WFI_IDLE=TRUE diff --git a/keyboards/misterknife/knife66_iso/config.h b/keyboards/misterknife/knife66_iso/config.h index bbe55dcc48..910cc2a917 100644 --- a/keyboards/misterknife/knife66_iso/config.h +++ b/keyboards/misterknife/knife66_iso/config.h @@ -27,11 +27,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #define RGBLIGHT_EFFECT_RGB_TEST #define RGBLIGHT_EFFECT_ALTERNATING #define RGBLIGHT_EFFECT_TWINKLE -#define RGBLIGHT_SLEEP -#define RGBLED_NUM 6 -#define RGBLIGHT_HUE_STEP 8 -#define RGBLIGHT_SAT_STEP 8 -#define RGBLIGHT_VAL_STEP 8 #define WS2812_PWM_DRIVER PWMD1 // default: PWMD1 #define WS2812_PWM_CHANNEL 2 // default: 2 diff --git a/keyboards/misterknife/knife66_iso/info.json b/keyboards/misterknife/knife66_iso/info.json index 18d66368b5..d33ec0f484 100644 --- a/keyboards/misterknife/knife66_iso/info.json +++ b/keyboards/misterknife/knife66_iso/info.json @@ -13,7 +13,11 @@ "driver": "pwm" }, "rgblight": { - "max_brightness": 160 + "saturation_steps": 8, + "brightness_steps": 8, + "led_count": 6, + "max_brightness": 160, + "sleep": true }, "matrix_pins": { "cols": ["B2", "B1", "B0", "A7", "A6", "A5", "A4", "B9", "B8", "B7", "B6", "B5", "B4", "B3", "A15"], diff --git a/keyboards/misterknife/knife66_iso/rules.mk b/keyboards/misterknife/knife66_iso/rules.mk index 0f15f10b20..0098dc473a 100644 --- a/keyboards/misterknife/knife66_iso/rules.mk +++ b/keyboards/misterknife/knife66_iso/rules.mk @@ -11,5 +11,3 @@ BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality RGBLIGHT_ENABLE = yes # Enable keyboard RGB underglow AUDIO_ENABLE = no # Audio output -# Enter lower-power sleep mode when on the ChibiOS idle thread -OPT_DEFS += -DCORTEX_ENABLE_WFI_IDLE=TRUE diff --git a/keyboards/miuni32/config.h b/keyboards/miuni32/config.h index 76fa3df3f4..a2119b413f 100644 --- a/keyboards/miuni32/config.h +++ b/keyboards/miuni32/config.h @@ -38,7 +38,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. //#define NO_ACTION_TAPPING //#define NO_ACTION_ONESHOT -#define RGBLED_NUM 17 // Number of LEDs #define RGBLIGHT_EFFECT_BREATHING #define RGBLIGHT_EFFECT_RAINBOW_MOOD #define RGBLIGHT_EFFECT_RAINBOW_SWIRL @@ -49,6 +48,3 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #define RGBLIGHT_EFFECT_RGB_TEST #define RGBLIGHT_EFFECT_ALTERNATING #define RGBLIGHT_EFFECT_TWINKLE -#define RGBLIGHT_HUE_STEP 10 -#define RGBLIGHT_SAT_STEP 17 -#define RGBLIGHT_VAL_STEP 17 diff --git a/keyboards/miuni32/info.json b/keyboards/miuni32/info.json index 0c1c5d7c44..d55cfea85c 100644 --- a/keyboards/miuni32/info.json +++ b/keyboards/miuni32/info.json @@ -8,6 +8,10 @@ "pid": "0x6060", "device_version": "0.0.1" }, + "rgblight": { + "hue_steps": 10, + "led_count": 17 + }, "ws2812": { "pin": "D0" }, diff --git a/keyboards/miuni32/keymaps/kifinnsson/keymap.c b/keyboards/miuni32/keymaps/kifinnsson/keymap.c index 3ce4e14575..51a0b6fefa 100644 --- a/keyboards/miuni32/keymaps/kifinnsson/keymap.c +++ b/keyboards/miuni32/keymaps/kifinnsson/keymap.c @@ -74,12 +74,6 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { ) }; -void matrix_init_user(void) { -} - -void matrix_scan_user(void) { -} - //planck like tri layer bool process_record_user(uint16_t keycode, keyrecord_t *record) { switch (keycode) { @@ -112,37 +106,3 @@ bool process_record_user(uint16_t keycode, keyrecord_t *record) { } return true; } - -void led_set_user(uint8_t usb_led) { - - if (usb_led & (1 << USB_LED_NUM_LOCK)) { - - } else { - - } - - if (usb_led & (1 << USB_LED_CAPS_LOCK)) { - - } else { - - } - - if (usb_led & (1 << USB_LED_SCROLL_LOCK)) { - - } else { - - } - - if (usb_led & (1 << USB_LED_COMPOSE)) { - - } else { - - } - - if (usb_led & (1 << USB_LED_KANA)) { - - } else { - - } - -} diff --git a/keyboards/mixi/config.h b/keyboards/mixi/config.h index ad57ad01d6..9b52398ae9 100644 --- a/keyboards/mixi/config.h +++ b/keyboards/mixi/config.h @@ -6,11 +6,6 @@ /* Locking resynchronize hack */ #define LOCKING_RESYNC_ENABLE -#define RGBLED_NUM 5 -#define RGBLIGHT_HUE_STEP 8 -#define RGBLIGHT_SAT_STEP 8 -#define RGBLIGHT_VAL_STEP 8 -#define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */ #define RGBLIGHT_EFFECT_BREATHING #define RGBLIGHT_EFFECT_RAINBOW_MOOD #define RGBLIGHT_EFFECT_RAINBOW_SWIRL diff --git a/keyboards/mixi/info.json b/keyboards/mixi/info.json index aa31b758e9..ee02f06576 100644 --- a/keyboards/mixi/info.json +++ b/keyboards/mixi/info.json @@ -8,6 +8,12 @@ "pid": "0x4D49", "device_version": "0.0.1" }, + "rgblight": { + "saturation_steps": 8, + "brightness_steps": 8, + "led_count": 5, + "sleep": true + }, "ws2812": { "pin": "B5" }, diff --git a/keyboards/mk65/config.h b/keyboards/mk65/config.h deleted file mode 100644 index 7fa60c79f8..0000000000 --- a/keyboards/mk65/config.h +++ /dev/null @@ -1,19 +0,0 @@ -/* Copyright 2022 DeskDaily - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see <http://www.gnu.org/licenses/>. - */ - -#pragma once - -#define TAP_CODE_DELAY 10
\ No newline at end of file diff --git a/keyboards/mk65/info.json b/keyboards/mk65/info.json index 0ad1476419..44a8e15f15 100644 --- a/keyboards/mk65/info.json +++ b/keyboards/mk65/info.json @@ -13,6 +13,9 @@ {"pin_a": "B1", "pin_b": "B2"} ] }, + "qmk": { + "tap_keycode_delay": 10 + }, "processor": "atmega32u4", "bootloader": "atmel-dfu", "matrix_pins": { diff --git a/keyboards/mkh_studio/bully/rules.mk b/keyboards/mkh_studio/bully/rules.mk index 10a3d3bfb4..84467251b0 100644 --- a/keyboards/mkh_studio/bully/rules.mk +++ b/keyboards/mkh_studio/bully/rules.mk @@ -1,2 +1 @@ DFU_SUFFIX_ARGS = -p FFFF -v FFFF # allow for APM32 MCU -OPT_DEFS += -DCORTEX_ENABLE_WFI_IDLE=TRUE diff --git a/keyboards/ml/gas75/info.json b/keyboards/ml/gas75/info.json index 990b45f1ce..a72db33f25 100644 --- a/keyboards/ml/gas75/info.json +++ b/keyboards/ml/gas75/info.json @@ -49,9 +49,7 @@ {"matrix": [0, 13], "x": 14, "y": 0}, - {"matrix": [5, 4], "x": 15, "y": 0, "w": 0.5}, {"matrix": [0, 14], "x": 15.5, "y": 0}, - {"matrix": [5, 3], "x": 16.5, "y": 0, "w": 0.5}, {"matrix": [1, 0], "x": 0, "y": 1.25}, {"matrix": [1, 1], "x": 1, "y": 1.25}, diff --git a/keyboards/ml/gas75/keymaps/default/keymap.c b/keyboards/ml/gas75/keymaps/default/keymap.c index aa72a3c853..7fe790e601 100644 --- a/keyboards/ml/gas75/keymaps/default/keymap.c +++ b/keyboards/ml/gas75/keymaps/default/keymap.c @@ -83,7 +83,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { */ /* Row: 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 */ [_BASE] = LAYOUT( - KC_ESC, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_DEL, _______, KC_MUTE, _______, + KC_ESC, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_DEL, KC_MUTE, KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_HOME, KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_PGUP, KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, KC_PGDN, @@ -110,7 +110,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { */ /* Row: 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 */ [_FN] = LAYOUT( - QK_BOOT, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, RGB_TOG, _______, + QK_BOOT, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, RGB_TOG, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, RGB_HUI, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, RGB_HUD, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, @@ -158,25 +158,11 @@ bool process_record_user(uint16_t keycode, keyrecord_t *record) { return true; } -#ifdef ENCODER_ENABLE -bool encoder_update_user(uint8_t index, bool clockwise) { - if (index == 0) { - if (layer_state_is(_BASE)) { - if (clockwise) { - tap_code(KC_VOLU); - } else { - tap_code(KC_VOLD); - } - } else if (layer_state_is(_FN)) { - if (clockwise) { - rgb_matrix_step(); - } else { - rgb_matrix_step_reverse(); - } - } - } - return true; -} +#ifdef ENCODER_MAP_ENABLE +const uint16_t PROGMEM encoder_map[][NUM_ENCODERS][NUM_DIRECTIONS] = { + [0] = { ENCODER_CCW_CW(KC_VOLD, KC_VOLU) }, + [1] = { ENCODER_CCW_CW(RGB_RMOD, RGB_MOD) }, +}; #endif bool rgb_matrix_indicators_user(void) { diff --git a/keyboards/ml/gas75/keymaps/via/keymap.c b/keyboards/ml/gas75/keymaps/via/keymap.c index 615e36557a..a533571beb 100644 --- a/keyboards/ml/gas75/keymaps/via/keymap.c +++ b/keyboards/ml/gas75/keymaps/via/keymap.c @@ -83,7 +83,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { */ /* Row: 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 */ [_BASE] = LAYOUT( - KC_ESC, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_DEL, KC_VOLD, KC_MUTE, KC_VOLU, + KC_ESC, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_DEL, KC_MUTE, KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_HOME, KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_PGUP, KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, KC_PGDN, @@ -110,7 +110,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { */ /* Row: 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 */ [_FN] = LAYOUT( - QK_BOOT, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, RGB_RMOD, RGB_TOG, RGB_MOD, + QK_BOOT, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, RGB_TOG, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, RGB_HUI, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, RGB_HUD, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, @@ -158,45 +158,11 @@ bool process_record_user(uint16_t keycode, keyrecord_t *record) { return true; } -#ifdef ENCODER_ENABLE -static uint8_t encoder_state[NUM_ENCODERS] = {0}; -static keypos_t encoder_cw[NUM_ENCODERS] = {{3, 5}}; -static keypos_t encoder_ccw[NUM_ENCODERS] = {{4, 5}}; - -void encoder_action_unregister(void) { - for (int index = 0; index < NUM_ENCODERS; ++index) { - if (encoder_state[index]) { - keyevent_t encoder_event = (keyevent_t) { - .key = encoder_state[index] >> 1 ? encoder_cw[index] : encoder_ccw[index], - .pressed = false, - .time = timer_read(), - .type = KEY_EVENT - }; - encoder_state[index] = 0; - action_exec(encoder_event); - } - } -} - -void encoder_action_register(uint8_t index, bool clockwise) { - keyevent_t encoder_event = (keyevent_t) { - .key = clockwise ? encoder_cw[index] : encoder_ccw[index], - .pressed = true, - .time = timer_read(), - .type = KEY_EVENT - }; - encoder_state[index] = (clockwise ^ 1) | (clockwise << 1); - action_exec(encoder_event); -} - -void matrix_scan_user(void) { - encoder_action_unregister(); -} - -bool encoder_update_user(uint8_t index, bool clockwise) { - encoder_action_register(index, clockwise); - return false; -} +#ifdef ENCODER_MAP_ENABLE +const uint16_t PROGMEM encoder_map[][NUM_ENCODERS][NUM_DIRECTIONS] = { + [0] = { ENCODER_CCW_CW(KC_VOLD, KC_VOLU) }, + [1] = { ENCODER_CCW_CW(RGB_RMOD, RGB_MOD) }, +}; #endif bool rgb_matrix_indicators_user(void) { diff --git a/keyboards/ml/gas75/keymaps/via/rules.mk b/keyboards/ml/gas75/keymaps/via/rules.mk index 36b7ba9cbc..1189f4ad19 100644 --- a/keyboards/ml/gas75/keymaps/via/rules.mk +++ b/keyboards/ml/gas75/keymaps/via/rules.mk @@ -1,2 +1,3 @@ VIA_ENABLE = yes LTO_ENABLE = yes +ENCODER_MAP_ENABLE = yes diff --git a/keyboards/mlego/m48/rev1/config.h b/keyboards/mlego/m48/rev1/config.h index 303b7ae5b5..49860215fa 100644 --- a/keyboards/mlego/m48/rev1/config.h +++ b/keyboards/mlego/m48/rev1/config.h @@ -18,7 +18,6 @@ #ifdef RGBLIGHT_ENABLE #define RGBLIGHT_LAYERS -#define RGBLED_NUM 20 #define RGBLIGHT_EFFECT_BREATHING #define RGBLIGHT_EFFECT_RAINBOW_MOOD #define RGBLIGHT_EFFECT_RAINBOW_SWIRL diff --git a/keyboards/mlego/m48/rev1/info.json b/keyboards/mlego/m48/rev1/info.json index 4ccf9ede92..99c71ad37a 100644 --- a/keyboards/mlego/m48/rev1/info.json +++ b/keyboards/mlego/m48/rev1/info.json @@ -18,6 +18,9 @@ "num_lock": "B12", "scroll_lock": "B13" }, + "rgblight": { + "led_count": 20 + }, "ws2812": { "pin": "B15" }, diff --git a/keyboards/mlego/m60/rev1/config.h b/keyboards/mlego/m60/rev1/config.h index dc6c4c225d..71050b6ad4 100644 --- a/keyboards/mlego/m60/rev1/config.h +++ b/keyboards/mlego/m60/rev1/config.h @@ -19,7 +19,6 @@ #define RGBLIGHT_LAYERS -#define RGBLED_NUM 20 #define RGBLIGHT_EFFECT_BREATHING #define RGBLIGHT_EFFECT_RAINBOW_MOOD #define RGBLIGHT_EFFECT_RAINBOW_SWIRL diff --git a/keyboards/mlego/m60/rev1/info.json b/keyboards/mlego/m60/rev1/info.json index bbe9f86112..112b590f54 100644 --- a/keyboards/mlego/m60/rev1/info.json +++ b/keyboards/mlego/m60/rev1/info.json @@ -18,6 +18,9 @@ "num_lock": "B12", "scroll_lock": "B13" }, + "rgblight": { + "led_count": 20 + }, "ws2812": { "pin": "B15" }, diff --git a/keyboards/mlego/m60_split/rev1/config.h b/keyboards/mlego/m60_split/rev1/config.h index f6f86beed1..6f08c76e46 100644 --- a/keyboards/mlego/m60_split/rev1/config.h +++ b/keyboards/mlego/m60_split/rev1/config.h @@ -24,15 +24,10 @@ #define SERIAL_USART_SPEED 921600 #ifdef RGBLIGHT_ENABLE -#define RGBLIGHT_SPLIT #define RGBLIGHT_LAYERS #define RGBLIGHT_DEFAULT_HUE 213 -#define RGBLED_NUM 16 -#define RGBLED_SPLIT \ - { 8, 8 } - #define RGBLIGHT_EFFECT_BREATHING #define RGBLIGHT_EFFECT_RAINBOW_MOOD #define RGBLIGHT_EFFECT_RAINBOW_SWIRL diff --git a/keyboards/mlego/m60_split/rev1/info.json b/keyboards/mlego/m60_split/rev1/info.json index 6fe572fcf1..deeffe7753 100644 --- a/keyboards/mlego/m60_split/rev1/info.json +++ b/keyboards/mlego/m60_split/rev1/info.json @@ -22,7 +22,9 @@ "pin": "B15" }, "rgblight": { - "max_brightness": 128 + "led_count": 16, + "max_brightness": 128, + "split_count": [8, 8] }, "split": { "bootmagic": { diff --git a/keyboards/mlego/m60_split/rev2/config.h b/keyboards/mlego/m60_split/rev2/config.h index cfcb26edc1..7373aa2adf 100644 --- a/keyboards/mlego/m60_split/rev2/config.h +++ b/keyboards/mlego/m60_split/rev2/config.h @@ -26,11 +26,7 @@ #ifdef RGBLIGHT_ENABLE -#define RGBLIGHT_SPLIT #define RGBLIGHT_LAYERS -#define RGBLED_NUM 16 -#define RGBLED_SPLIT \ - { 8, 8 } #define RGBLIGHT_EFFECT_BREATHING #define RGBLIGHT_EFFECT_RAINBOW_MOOD #define RGBLIGHT_EFFECT_RAINBOW_SWIRL diff --git a/keyboards/mlego/m60_split/rev2/info.json b/keyboards/mlego/m60_split/rev2/info.json index 40718aa647..bfa70ec0bd 100644 --- a/keyboards/mlego/m60_split/rev2/info.json +++ b/keyboards/mlego/m60_split/rev2/info.json @@ -18,6 +18,10 @@ "num_lock": "B12", "scroll_lock": "B13" }, + "rgblight": { + "led_count": 16, + "split_count": [8, 8] + }, "ws2812": { "pin": "B15" }, diff --git a/keyboards/mlego/m65/keymaps/uk/keymap.c b/keyboards/mlego/m65/keymaps/uk/keymap.c index 8a711234b5..ee48872433 100644 --- a/keyboards/mlego/m65/keymaps/uk/keymap.c +++ b/keyboards/mlego/m65/keymaps/uk/keymap.c @@ -190,9 +190,9 @@ MS - mouse directions */ [_LWR] = LAYOUT_ortho_5x13( KC_GRV , KC_MUTE, KC_VOLU, KC_VOLD, KC_MPRV, KC_MPLY, KC_MNXT, G(KC_P), KC_SLEP, KC_WAKE, KC_PSCR, KC_DEL, UK_EQL, - KC_BTN3,XP(lq,lQ),XP(lw,lW),XP(le,lE),XP(lr,lR),XP(lt,lT),XP(ly,lY),XP(lu,lU),XP(li,lI), XP(lo,lO), XP(lp,lP), _______, _______, - KC_BTN2,XP(la,lA),XP(ls,lS),XP(ld,lD),XP(lf,lF),XP(lg,lG),XP(lh,lH),XP(lj,lJ),XP(lk,lK), XP(ll,lL),XP(ll1,lL1), XP(lk1,lK1), _______, - _______, KC_BTN1,XP(lz,lZ),XP(lx,lX),XP(lc,lC),XP(lv,lV),XP(lb,lB),XP(ln,lN),XP(lm,lM),XP(lc1,lC1),XP(lp1,lP1), KC_MS_U, XP(lq1,lQ1), + KC_BTN3,UP(lq,lQ),UP(lw,lW),UP(le,lE),UP(lr,lR),UP(lt,lT),UP(ly,lY),UP(lu,lU),UP(li,lI), UP(lo,lO), UP(lp,lP), _______, _______, + KC_BTN2,UP(la,lA),UP(ls,lS),UP(ld,lD),UP(lf,lF),UP(lg,lG),UP(lh,lH),UP(lj,lJ),UP(lk,lK), UP(ll,lL),UP(ll1,lL1), UP(lk1,lK1), _______, + _______, KC_BTN1,UP(lz,lZ),UP(lx,lX),UP(lc,lC),UP(lv,lV),UP(lb,lB),UP(ln,lN),UP(lm,lM),UP(lc1,lC1),UP(lp1,lP1), KC_MS_U, UP(lq1,lQ1), _______, KC_BTN4, _______, _______, _______, _______, _______, _______, _______, _______, KC_MS_L, KC_MS_D, KC_MS_R), /* @@ -224,9 +224,9 @@ raise layer shifted */ [_RSE] = LAYOUT_ortho_5x13( KC_ESC , KC_F1 , KC_F2 , KC_F3 , KC_F4 , KC_F5 , KC_F6 , KC_F7 , KC_F8 , KC_F9 , KC_F10 , KC_F11 , KC_F12 , - _______,XP(ra1,rA1), _______, _______, _______,XP(rt,rT), _______, _______,XP(ri,rI), _______, _______, _______, _______ , - KC_CAPS, XP(ra,rA), XP(rs,rS), _______, _______, _______, _______, _______, _______, _______, _______, _______, _______ , - _______, KC_F20 , _______, _______,XP(rc,rC), _______, _______, _______, _______, _______, _______, KC_WH_U, _______ , + _______,UP(ra1,rA1), _______, _______, _______,UP(rt,rT), _______, _______,UP(ri,rI), _______, _______, _______, _______ , + KC_CAPS, UP(ra,rA), UP(rs,rS), _______, _______, _______, _______, _______, _______, _______, _______, _______, _______ , + _______, KC_F20 , _______, _______,UP(rc,rC), _______, _______, _______, _______, _______, _______, KC_WH_U, _______ , _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_WH_L, KC_WH_D, KC_WH_R), /* adj layer diff --git a/keyboards/mlego/m65/rev1/config.h b/keyboards/mlego/m65/rev1/config.h index 2ed846b170..56c64846e5 100644 --- a/keyboards/mlego/m65/rev1/config.h +++ b/keyboards/mlego/m65/rev1/config.h @@ -19,8 +19,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #define RGBLIGHT_LAYERS -#undef RGBLED_NUM -#define RGBLED_NUM 20 #define RGBLIGHT_EFFECT_BREATHING #define RGBLIGHT_EFFECT_RAINBOW_MOOD #define RGBLIGHT_EFFECT_RAINBOW_SWIRL @@ -31,5 +29,3 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #define RGBLIGHT_EFFECT_RGB_TEST #define RGBLIGHT_EFFECT_ALTERNATING #define RGBLIGHT_EFFECT_TWINKLE -#define RGBLIGHT_HUE_STEP 8 -#define RGBLIGHT_SAT_STEP 8 diff --git a/keyboards/mlego/m65/rev1/info.json b/keyboards/mlego/m65/rev1/info.json index 3c939ef4c2..0736422499 100644 --- a/keyboards/mlego/m65/rev1/info.json +++ b/keyboards/mlego/m65/rev1/info.json @@ -18,6 +18,10 @@ "num_lock": "B12", "scroll_lock": "B13" }, + "rgblight": { + "saturation_steps": 8, + "led_count": 20 + }, "ws2812": { "pin": "B15" }, diff --git a/keyboards/mlego/m65/rev2/config.h b/keyboards/mlego/m65/rev2/config.h index 791b73e2f6..08e73f8406 100644 --- a/keyboards/mlego/m65/rev2/config.h +++ b/keyboards/mlego/m65/rev2/config.h @@ -19,8 +19,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #define RGBLIGHT_LAYERS -#undef RGBLED_NUM -#define RGBLED_NUM 20 #define RGBLIGHT_EFFECT_BREATHING #define RGBLIGHT_EFFECT_RAINBOW_MOOD #define RGBLIGHT_EFFECT_RAINBOW_SWIRL @@ -31,8 +29,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #define RGBLIGHT_EFFECT_RGB_TEST #define RGBLIGHT_EFFECT_ALTERNATING #define RGBLIGHT_EFFECT_TWINKLE -#define RGBLIGHT_HUE_STEP 8 -#define RGBLIGHT_SAT_STEP 8 #define EEPROM_PAGE_SIZE #define FEE_PAGE_SIZE 0x800 diff --git a/keyboards/mlego/m65/rev2/info.json b/keyboards/mlego/m65/rev2/info.json index 64df0a2ba6..126e7c2e90 100644 --- a/keyboards/mlego/m65/rev2/info.json +++ b/keyboards/mlego/m65/rev2/info.json @@ -18,6 +18,10 @@ "num_lock": "B12", "scroll_lock": "B13" }, + "rgblight": { + "saturation_steps": 8, + "led_count": 20 + }, "ws2812": { "pin": "B15" }, diff --git a/keyboards/mlego/m65/rev3/config.h b/keyboards/mlego/m65/rev3/config.h index 81f02bc411..dfce22e674 100644 --- a/keyboards/mlego/m65/rev3/config.h +++ b/keyboards/mlego/m65/rev3/config.h @@ -20,8 +20,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #ifdef RGBLIGHT_ENABLE #define RGBLIGHT_LAYERS -#undef RGBLED_NUM -#define RGBLED_NUM 20 #define RGBLIGHT_EFFECT_BREATHING #define RGBLIGHT_EFFECT_RAINBOW_MOOD #define RGBLIGHT_EFFECT_RAINBOW_SWIRL @@ -32,6 +30,4 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #define RGBLIGHT_EFFECT_RGB_TEST #define RGBLIGHT_EFFECT_ALTERNATING #define RGBLIGHT_EFFECT_TWINKLE -#define RGBLIGHT_HUE_STEP 8 -#define RGBLIGHT_SAT_STEP 8 #endif diff --git a/keyboards/mlego/m65/rev3/info.json b/keyboards/mlego/m65/rev3/info.json index b72b706587..7b169cff90 100644 --- a/keyboards/mlego/m65/rev3/info.json +++ b/keyboards/mlego/m65/rev3/info.json @@ -18,6 +18,10 @@ "num_lock": "B12", "scroll_lock": "B13" }, + "rgblight": { + "saturation_steps": 8, + "led_count": 20 + }, "ws2812": { "pin": "B15" }, diff --git a/keyboards/mlego/m65/rev4/config.h b/keyboards/mlego/m65/rev4/config.h index 942f360688..64e0d50b7f 100644 --- a/keyboards/mlego/m65/rev4/config.h +++ b/keyboards/mlego/m65/rev4/config.h @@ -20,8 +20,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #ifdef RGBLIGHT_ENABLE #define RGBLIGHT_LAYERS -#undef RGBLED_NUM -#define RGBLED_NUM 20 #define RGBLIGHT_EFFECT_BREATHING #define RGBLIGHT_EFFECT_RAINBOW_MOOD #define RGBLIGHT_EFFECT_RAINBOW_SWIRL @@ -32,8 +30,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #define RGBLIGHT_EFFECT_RGB_TEST #define RGBLIGHT_EFFECT_ALTERNATING #define RGBLIGHT_EFFECT_TWINKLE -#define RGBLIGHT_HUE_STEP 8 -#define RGBLIGHT_SAT_STEP 8 #endif diff --git a/keyboards/mlego/m65/rev4/info.json b/keyboards/mlego/m65/rev4/info.json index d671845e62..fd53630fac 100644 --- a/keyboards/mlego/m65/rev4/info.json +++ b/keyboards/mlego/m65/rev4/info.json @@ -18,6 +18,10 @@ "num_lock": "B12", "scroll_lock": "B13" }, + "rgblight": { + "saturation_steps": 8, + "led_count": 20 + }, "ws2812": { "pin": "B15" }, diff --git a/keyboards/mmkzoo65/config.h b/keyboards/mmkzoo65/config.h deleted file mode 100644 index 99f9e80b3e..0000000000 --- a/keyboards/mmkzoo65/config.h +++ /dev/null @@ -1,20 +0,0 @@ -/* Copyright 2021 TW59420 <https://github.com/TW59420> - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see <http://www.gnu.org/licenses/>. - */ - -#pragma once - -/* 将USB 轮询速率更改为 1000hz 并为精英游戏每次扫描使用更大的密钥*/ -#define USB_POLLING_INTERVAL_MS 2 diff --git a/keyboards/mmkzoo65/info.json b/keyboards/mmkzoo65/info.json index 558d1fa0dc..504e7b1061 100644 --- a/keyboards/mmkzoo65/info.json +++ b/keyboards/mmkzoo65/info.json @@ -7,7 +7,8 @@ "vid": "0x7BA1", "pid": "0x6505", "device_version": "0.0.1", - "force_nkro": true + "force_nkro": true, + "polling_interval": 2 }, "matrix_pins": { "cols": ["B1", "F0", "F1", "F4", "F5", "F6", "F7", "D4", "D6", "D7", "B4", "B5", "B6", "C6", "C7"], diff --git a/keyboards/mnk1800s/rules.mk b/keyboards/mnk1800s/rules.mk index 7000bb6571..7c0709f41e 100755..100644 --- a/keyboards/mnk1800s/rules.mk +++ b/keyboards/mnk1800s/rules.mk @@ -1,11 +1,6 @@ # Wildcard to allow APM32 MCU DFU_SUFFIX_ARGS = -v FFFF -p FFFF -# Do not put the microcontroller into power saving mode -# when we get USB suspend event. We want it to keep updating -# backlight effects. -OPT_DEFS += -DCORTEX_ENABLE_WFI_IDLE=TRUE - # Build Options # change yes to no to disable # diff --git a/keyboards/mnk50/rules.mk b/keyboards/mnk50/rules.mk index 7000bb6571..7c0709f41e 100755..100644 --- a/keyboards/mnk50/rules.mk +++ b/keyboards/mnk50/rules.mk @@ -1,11 +1,6 @@ # Wildcard to allow APM32 MCU DFU_SUFFIX_ARGS = -v FFFF -p FFFF -# Do not put the microcontroller into power saving mode -# when we get USB suspend event. We want it to keep updating -# backlight effects. -OPT_DEFS += -DCORTEX_ENABLE_WFI_IDLE=TRUE - # Build Options # change yes to no to disable # diff --git a/keyboards/mnk75/rules.mk b/keyboards/mnk75/rules.mk index ae3dafb3de..50f3a3d151 100755..100644 --- a/keyboards/mnk75/rules.mk +++ b/keyboards/mnk75/rules.mk @@ -1,11 +1,6 @@ # Wildcard to allow APM32 MCU DFU_SUFFIX_ARGS = -v FFFF -p FFFF -# Do not put the microcontroller into power saving mode -# when we get USB suspend event. We want it to keep updating -# backlight effects. -OPT_DEFS += -DCORTEX_ENABLE_WFI_IDLE=TRUE - # Build Options # change yes to no to disable # diff --git a/keyboards/mode/m65ha_alpha/m65ha_alpha.c b/keyboards/mode/m65ha_alpha/m65ha_alpha.c index 60a9a89927..afb093058f 100644 --- a/keyboards/mode/m65ha_alpha/m65ha_alpha.c +++ b/keyboards/mode/m65ha_alpha/m65ha_alpha.c @@ -21,7 +21,6 @@ void board_init(void) { setPinInput(B10); } -#define LED_PIN_ON_STATE 1 void led_init_ports(void) { /** If the OPENDRAIN_INDICATORS option is not defined in config.h, the indicator diff --git a/keyboards/mode/m65ha_alpha/rules.mk b/keyboards/mode/m65ha_alpha/rules.mk index 71de5b0a9f..da4b493847 100644 --- a/keyboards/mode/m65ha_alpha/rules.mk +++ b/keyboards/mode/m65ha_alpha/rules.mk @@ -12,5 +12,3 @@ RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow AUDIO_ENABLE = no # Audio output EEPROM_DRIVER = i2c -# Enter lower-power sleep mode when on the ChibiOS idle thread -OPT_DEFS += -DCORTEX_ENABLE_WFI_IDLE=TRUE -DDEBUG_EEPROM_OUTPUT=TRUE diff --git a/keyboards/mode/m65hi_alpha/m65hi_alpha.c b/keyboards/mode/m65hi_alpha/m65hi_alpha.c index 60a9a89927..afb093058f 100644 --- a/keyboards/mode/m65hi_alpha/m65hi_alpha.c +++ b/keyboards/mode/m65hi_alpha/m65hi_alpha.c @@ -21,7 +21,6 @@ void board_init(void) { setPinInput(B10); } -#define LED_PIN_ON_STATE 1 void led_init_ports(void) { /** If the OPENDRAIN_INDICATORS option is not defined in config.h, the indicator diff --git a/keyboards/mode/m65hi_alpha/rules.mk b/keyboards/mode/m65hi_alpha/rules.mk index 71de5b0a9f..da4b493847 100644 --- a/keyboards/mode/m65hi_alpha/rules.mk +++ b/keyboards/mode/m65hi_alpha/rules.mk @@ -12,5 +12,3 @@ RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow AUDIO_ENABLE = no # Audio output EEPROM_DRIVER = i2c -# Enter lower-power sleep mode when on the ChibiOS idle thread -OPT_DEFS += -DCORTEX_ENABLE_WFI_IDLE=TRUE -DDEBUG_EEPROM_OUTPUT=TRUE diff --git a/keyboards/mode/m65s/config.h b/keyboards/mode/m65s/config.h index ed3faacae0..80d31d8d75 100644 --- a/keyboards/mode/m65s/config.h +++ b/keyboards/mode/m65s/config.h @@ -45,5 +45,3 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. //#define NO_ACTION_LAYER //#define NO_ACTION_TAPPING //#define NO_ACTION_ONESHOT - -#define TAP_CODE_DELAY 50 diff --git a/keyboards/mode/m65s/info.json b/keyboards/mode/m65s/info.json index 06e49f7667..0a0c93f3f8 100644 --- a/keyboards/mode/m65s/info.json +++ b/keyboards/mode/m65s/info.json @@ -8,6 +8,9 @@ "pid": "0x6583", "device_version": "0.0.1" }, + "qmk": { + "tap_keycode_delay": 50 + }, "matrix_pins": { "cols": ["C7", "A8", "A10", "A4", "A5", "A6", "C10", "A7", "C4", "C5", "A15", "B0", "B1", "B12", "B10", "B13"], "rows": ["A3", "B14", "B15", "C9", "C6", "C11"] diff --git a/keyboards/mode/m65s/m65s.c b/keyboards/mode/m65s/m65s.c index 70aa52c461..954644310b 100644 --- a/keyboards/mode/m65s/m65s.c +++ b/keyboards/mode/m65s/m65s.c @@ -21,7 +21,6 @@ void board_init(void) { setPinInput(B10); } -#define LED_PIN_ON_STATE 1 void led_init_ports(void) { /** If the OPENDRAIN_INDICATORS option is not defined in config.h, the indicator diff --git a/keyboards/mode/m65s/rules.mk b/keyboards/mode/m65s/rules.mk index 91bc99f944..5dd8d547ab 100644 --- a/keyboards/mode/m65s/rules.mk +++ b/keyboards/mode/m65s/rules.mk @@ -12,5 +12,3 @@ RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow AUDIO_ENABLE = no # Audio output EEPROM_DRIVER = i2c -# Enter lower-power sleep mode when on the ChibiOS idle thread -OPT_DEFS += -DCORTEX_ENABLE_WFI_IDLE=TRUE -DDEBUG_EEPROM_OUTPUT=TRUE diff --git a/keyboards/mode/m75h/rules.mk b/keyboards/mode/m75h/rules.mk index 5302cbfc19..328eece1f9 100644 --- a/keyboards/mode/m75h/rules.mk +++ b/keyboards/mode/m75h/rules.mk @@ -12,5 +12,3 @@ RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow AUDIO_ENABLE = no # Audio output LTO_ENABLE = yes -# Enter lower-power sleep mode when on the ChibiOS idle thread -OPT_DEFS += -DCORTEX_ENABLE_WFI_IDLE=TRUE -DDEBUG_EEPROM_OUTPUT=TRUE diff --git a/keyboards/mode/m75s/rules.mk b/keyboards/mode/m75s/rules.mk index bd7d6a84c5..760b9cb9e6 100644 --- a/keyboards/mode/m75s/rules.mk +++ b/keyboards/mode/m75s/rules.mk @@ -12,5 +12,3 @@ RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow AUDIO_ENABLE = no # Audio output LTO_ENABLE = yes -# Enter lower-power sleep mode when on the ChibiOS idle thread -OPT_DEFS += -DCORTEX_ENABLE_WFI_IDLE=TRUE -DDEBUG_EEPROM_OUTPUT=TRUE diff --git a/keyboards/mode/m80v1/m80h/rules.mk b/keyboards/mode/m80v1/m80h/rules.mk index 8c9d2aea96..5742215e0a 100644 --- a/keyboards/mode/m80v1/m80h/rules.mk +++ b/keyboards/mode/m80v1/m80h/rules.mk @@ -11,5 +11,3 @@ BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow AUDIO_ENABLE = no # Audio output -# Enter lower-power sleep mode when on the ChibiOS idle thread -OPT_DEFS += -DCORTEX_ENABLE_WFI_IDLE=TRUE diff --git a/keyboards/mode/m80v1/m80s/rules.mk b/keyboards/mode/m80v1/m80s/rules.mk index 8c9d2aea96..5742215e0a 100644 --- a/keyboards/mode/m80v1/m80s/rules.mk +++ b/keyboards/mode/m80v1/m80s/rules.mk @@ -11,5 +11,3 @@ BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow AUDIO_ENABLE = no # Audio output -# Enter lower-power sleep mode when on the ChibiOS idle thread -OPT_DEFS += -DCORTEX_ENABLE_WFI_IDLE=TRUE diff --git a/keyboards/mode/m80v2/m80v2h/rules.mk b/keyboards/mode/m80v2/m80v2h/rules.mk index 113eb5ade8..475d3a239c 100644 --- a/keyboards/mode/m80v2/m80v2h/rules.mk +++ b/keyboards/mode/m80v2/m80v2h/rules.mk @@ -11,5 +11,3 @@ BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow AUDIO_ENABLE = no # Audio output -# Enter lower-power sleep mode when on the ChibiOS idle thread -OPT_DEFS += -DCORTEX_ENABLE_WFI_IDLE=TRUE -DDEBUG_EEPROM_OUTPUT=TRUE diff --git a/keyboards/mode/m80v2/m80v2s/rules.mk b/keyboards/mode/m80v2/m80v2s/rules.mk index 113eb5ade8..475d3a239c 100644 --- a/keyboards/mode/m80v2/m80v2s/rules.mk +++ b/keyboards/mode/m80v2/m80v2s/rules.mk @@ -11,5 +11,3 @@ BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow AUDIO_ENABLE = no # Audio output -# Enter lower-power sleep mode when on the ChibiOS idle thread -OPT_DEFS += -DCORTEX_ENABLE_WFI_IDLE=TRUE -DDEBUG_EEPROM_OUTPUT=TRUE diff --git a/keyboards/momoka_ergo/config.h b/keyboards/momoka_ergo/config.h index 014b1f93a5..3821789047 100644 --- a/keyboards/momoka_ergo/config.h +++ b/keyboards/momoka_ergo/config.h @@ -19,17 +19,12 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #define SELECT_SOFT_SERIAL_SPEED 5 -#define RGBLED_NUM 22 #define RGBLIGHT_EFFECT_BREATHING #define RGBLIGHT_EFFECT_CHRISTMAS #define RGBLIGHT_EFFECT_KNIGHT #define RGBLIGHT_EFFECT_RAINBOW_SWIRL #define RGBLIGHT_EFFECT_STATIC_GRADIENT #define RGBLIGHT_EFFECT_TWINKLE -#define RGBLED_SPLIT { 11, 11 } -#define RGBLIGHT_HUE_STEP 8 -#define RGBLIGHT_SAT_STEP 8 -#define RGBLIGHT_VAL_STEP 8 /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ #define LOCKING_SUPPORT_ENABLE diff --git a/keyboards/momoka_ergo/info.json b/keyboards/momoka_ergo/info.json index fa116fd1c0..7245ef0e90 100644 --- a/keyboards/momoka_ergo/info.json +++ b/keyboards/momoka_ergo/info.json @@ -16,6 +16,12 @@ "split": { "soft_serial_pin": "D1" }, + "rgblight": { + "saturation_steps": 8, + "brightness_steps": 8, + "led_count": 22, + "split_count": [11, 11] + }, "ws2812": { "pin": "C7" }, diff --git a/keyboards/monarch/info.json b/keyboards/monarch/info.json index 95daea5cdb..ff47a1be3e 100644 --- a/keyboards/monarch/info.json +++ b/keyboards/monarch/info.json @@ -262,10 +262,7 @@ {"matrix": [4, 13], "x": 13.25, "y": 4.25}, {"matrix": [4, 14], "x": 14.25, "y": 4.25}, - {"matrix": [4, 15], "x": 15.25, "y": 4.25}, - - {"matrix": [5, 0], "x": 0, "y": 5}, - {"matrix": [5, 1], "x": 1, "y": 5} + {"matrix": [4, 15], "x": 15.25, "y": 4.25} ] } } diff --git a/keyboards/monarch/keymaps/default/keymap.c b/keyboards/monarch/keymaps/default/keymap.c index a9f67ee904..76d64c3563 100644 --- a/keyboards/monarch/keymaps/default/keymap.c +++ b/keyboards/monarch/keymaps/default/keymap.c @@ -33,12 +33,3 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { _______, _______, _______, BL_TOGG, _______, BL_DOWN, BL_OFF, BL_UP ) }; - -bool encoder_update_user(uint8_t index, bool clockwise) { - if (clockwise) { - tap_code(KC_VOLU); - } else { - tap_code(KC_VOLD); - } - return true; -} diff --git a/keyboards/monarch/keymaps/iso/keymap.c b/keyboards/monarch/keymaps/iso/keymap.c index e707b2104b..5df9e560d0 100644 --- a/keyboards/monarch/keymaps/iso/keymap.c +++ b/keyboards/monarch/keymaps/iso/keymap.c @@ -33,12 +33,3 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { _______, _______, _______, BL_TOGG, _______, BL_DOWN, BL_OFF, BL_UP ) }; - -bool encoder_update_user(uint8_t index, bool clockwise) { - if (clockwise) { - tap_code(KC_VOLU); - } else { - tap_code(KC_VOLD); - } - return true; -} diff --git a/keyboards/monarch/keymaps/via/keymap.c b/keyboards/monarch/keymaps/via/keymap.c index c70f9c213b..39ad94fb8e 100644 --- a/keyboards/monarch/keymaps/via/keymap.c +++ b/keyboards/monarch/keymaps/via/keymap.c @@ -23,70 +23,35 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_PGUP, KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, KC_PGDN, KC_LSFT, KC_NO, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_UP, - KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, MO(1), KC_LEFT, KC_DOWN, KC_RGHT, - KC_VOLD, KC_VOLU + KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, MO(1), KC_LEFT, KC_DOWN, KC_RGHT ), [1] = LAYOUT_all( QK_BOOT, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_DEL, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, BL_ON, - _______, _______, _______, BL_TOGG, _______, BL_DOWN, BL_OFF, BL_UP, - _______, _______ + _______, _______, _______, BL_TOGG, _______, BL_DOWN, BL_OFF, BL_UP ), [2] = LAYOUT_all( _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, - _______, _______, _______, _______, _______, _______, _______, _______, - _______, _______ + _______, _______, _______, _______, _______, _______, _______, _______ ), [3] = LAYOUT_all( _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, - _______, _______, _______, _______, _______, _______, _______, _______, - _______, _______ + _______, _______, _______, _______, _______, _______, _______, _______ ) }; - -keyevent_t encoder_ccw = { - .key = (keypos_t){.row = 5, .col = 0}, - .pressed = false, - .type = KEY_EVENT -}; - -keyevent_t encoder_cw = { - .key = (keypos_t){.row = 5, .col = 1}, - .pressed = false, - .type = KEY_EVENT +#ifdef ENCODER_MAP_ENABLE +const uint16_t PROGMEM encoder_map[][NUM_ENCODERS][NUM_DIRECTIONS] = { + [0] = { ENCODER_CCW_CW(KC_VOLD, KC_VOLU) }, + [1] = { ENCODER_CCW_CW(_______, _______) }, + [2] = { ENCODER_CCW_CW(_______, _______) }, + [3] = { ENCODER_CCW_CW(_______, _______) }, }; - -void matrix_scan_user(void) { - if (encoder_ccw.pressed) { - encoder_ccw.pressed = false; - encoder_ccw.time = timer_read(); - action_exec(encoder_ccw); - } - - if (encoder_cw.pressed) { - encoder_cw.pressed = false; - encoder_cw.time = timer_read(); - action_exec(encoder_cw); - } -} - -bool encoder_update_user(uint8_t index, bool clockwise) { - if (clockwise) { - encoder_cw.pressed = true; - encoder_cw.time = timer_read(); - action_exec(encoder_cw); - } else { - encoder_ccw.pressed = true; - encoder_ccw.time = timer_read(); - action_exec(encoder_ccw); - } - return true; -} +#endif diff --git a/keyboards/monarch/keymaps/via/rules.mk b/keyboards/monarch/keymaps/via/rules.mk index 1e5b99807c..f1adcab005 100644 --- a/keyboards/monarch/keymaps/via/rules.mk +++ b/keyboards/monarch/keymaps/via/rules.mk @@ -1 +1,2 @@ VIA_ENABLE = yes +ENCODER_MAP_ENABLE = yes diff --git a/keyboards/monarch/rules.mk b/keyboards/monarch/rules.mk index 5a2c15a821..195a2958ce 100644 --- a/keyboards/monarch/rules.mk +++ b/keyboards/monarch/rules.mk @@ -13,5 +13,3 @@ AUDIO_ENABLE = no # Audio output SLEEP_LED_ENABLE = yes ENCODER_ENABLE = yes -# Enter lower-power sleep mode when on the ChibiOS idle thread -OPT_DEFS += -DCORTEX_ENABLE_WFI_IDLE=TRUE diff --git a/keyboards/monstargear/xo87/rgb/config.h b/keyboards/monstargear/xo87/rgb/config.h index 34d301311b..770c20f019 100644 --- a/keyboards/monstargear/xo87/rgb/config.h +++ b/keyboards/monstargear/xo87/rgb/config.h @@ -22,7 +22,6 @@ #define RGB_MATRIX_MAXIMUM_BRIGHTNESS 100 // limits maximum brightness of LEDs to 100 out of 255. #define RGB_MATRIX_KEYPRESSES #define RGB_MATRIX_FRAMEBUFFER_EFFECTS -#define RGBLED_NUM 110 // RGB Matrix Animation modes. Explicitly enabled // For full list of effects, see: // https://docs.qmk.fm/#/feature_rgb_matrix?id=rgb-matrix-effects diff --git a/keyboards/monstargear/xo87/solderable/config.h b/keyboards/monstargear/xo87/solderable/config.h index f8e73dccb8..1725018300 100644 --- a/keyboards/monstargear/xo87/solderable/config.h +++ b/keyboards/monstargear/xo87/solderable/config.h @@ -24,9 +24,6 @@ #define KEYLED_ROW_PINS { E5,B4,B5,F0,C6,D5 } #define KEYLED_COL_PINS { C4,C2,C0,E0,D4,E4,B6,B2,F4,A0,F2,A4,F1,A7,D3,A3 } -#define RGB_MATRIX_LED_COUNT 21 -#define DRIVER_COUNT 2 -#define RGBLED_NUM 21 #define RGBLIGHT_EFFECT_BREATHING #define RGBLIGHT_EFFECT_RAINBOW_MOOD #define RGBLIGHT_EFFECT_RAINBOW_SWIRL diff --git a/keyboards/monstargear/xo87/solderable/info.json b/keyboards/monstargear/xo87/solderable/info.json index 9a38968618..98afa6e228 100644 --- a/keyboards/monstargear/xo87/solderable/info.json +++ b/keyboards/monstargear/xo87/solderable/info.json @@ -17,6 +17,9 @@ "driver": "custom", "pin": "F0" }, + "rgblight": { + "led_count": 21 + }, "ws2812": { "pin": "D7" }, diff --git a/keyboards/montsinger/rebound/rev4/config.h b/keyboards/montsinger/rebound/rev4/config.h index b0b9bb6c17..274c715a93 100644 --- a/keyboards/montsinger/rebound/rev4/config.h +++ b/keyboards/montsinger/rebound/rev4/config.h @@ -18,6 +18,3 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #define LOCKING_SUPPORT_ENABLE /* Locking resynchronize hack */ #define LOCKING_RESYNC_ENABLE - -/* ws2812 RGB LED */ -#define RGBLED_NUM 17 diff --git a/keyboards/montsinger/rebound/rev4/info.json b/keyboards/montsinger/rebound/rev4/info.json index 9f4e89497e..565e56701f 100644 --- a/keyboards/montsinger/rebound/rev4/info.json +++ b/keyboards/montsinger/rebound/rev4/info.json @@ -18,6 +18,9 @@ {"pin_a": "D2", "pin_b": "D3"} ] }, + "rgblight": { + "led_count": 17 + }, "ws2812": { "pin": "B6" }, diff --git a/keyboards/moonlander/moonlander.h b/keyboards/moonlander/moonlander.h index f68b60379c..0e5282c511 100644 --- a/keyboards/moonlander/moonlander.h +++ b/keyboards/moonlander/moonlander.h @@ -34,37 +34,6 @@ extern bool mcp23018_leds[]; #define ML_LED_5(status) mcp23018_leds[1] = (bool)status #define ML_LED_6(status) mcp23018_leds[2] = (bool)status - -// clang-format off -#define LED_LAYOUT_moonlander( \ - l00, l01, l02, l03, l04, l05, l06, l60, l61, l62, l63, l64, l65, l66, \ - l10, l11, l12, l13, l14, l15, l16, l70, l71, l72, l73, l74, l75, l76, \ - l20, l21, l22, l23, l24, l25, l26, l80, l81, l82, l83, l84, l85, l86, \ - l30, l31, l32, l33, l34, l35, l91, l92, l93, l94, l95, l96, \ - l40, l41, l42, l43, l44, l53, lb3, la2, la3, la4, la5, la6, \ - l50, l51, l52, lb4, lb5, lb6 \ -) \ -{ \ - l00, l10, l20, l30, l40, \ - l01, l11, l21, l31, l41, \ - l02, l12, l22, l32, l42, \ - l03, l13, l23, l33, l43, \ - l04, l14, l24, l34, l44, \ - l05, l15, l25, l35, \ - l06, l16, l26, \ - l50, l51, l52, l53, \ -\ - l66, l76, l86, l96, la6, \ - l65, l75, l85, l95, la5, \ - l64, l74, l84, l94, la4, \ - l63, l73, l83, l93, la3, \ - l62, l72, l82, l92, la2, \ - l61, l71, l81, l91, \ - l60, l70, l80, \ - lb6, lb5, lb4, lb3 \ -} -// clang-format on - enum planck_ez_keycodes { TOGGLE_LAYER_COLOR = QK_KB_0, LED_LEVEL, diff --git a/keyboards/mt/blocked65/config.h b/keyboards/mt/blocked65/config.h index b61be3ea8f..cfa335c00b 100644 --- a/keyboards/mt/blocked65/config.h +++ b/keyboards/mt/blocked65/config.h @@ -34,4 +34,3 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #define RGBLIGHT_EFFECT_RGB_TEST #define RGBLIGHT_EFFECT_ALTERNATING #define RGBLIGHT_EFFECT_TWINKLE -#define RGBLED_NUM 14 diff --git a/keyboards/mt/blocked65/info.json b/keyboards/mt/blocked65/info.json index db328f8dad..ceb71d1efa 100644 --- a/keyboards/mt/blocked65/info.json +++ b/keyboards/mt/blocked65/info.json @@ -8,6 +8,9 @@ "pid": "0x0001", "device_version": "0.0.1" }, + "rgblight": { + "led_count": 14 + }, "ws2812": { "pin": "E2" }, diff --git a/keyboards/mt/mt40/config.h b/keyboards/mt/mt40/config.h index bb90137436..32e880e6a2 100644 --- a/keyboards/mt/mt40/config.h +++ b/keyboards/mt/mt40/config.h @@ -17,7 +17,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #pragma once -#define RGBLED_NUM 12 #define RGBLIGHT_EFFECT_BREATHING #define RGBLIGHT_EFFECT_RAINBOW_MOOD #define RGBLIGHT_EFFECT_RAINBOW_SWIRL diff --git a/keyboards/mt/mt40/info.json b/keyboards/mt/mt40/info.json index 4d3cab4eba..f53e9f60d4 100644 --- a/keyboards/mt/mt40/info.json +++ b/keyboards/mt/mt40/info.json @@ -16,6 +16,9 @@ "backlight": { "pin": "D2" }, + "rgblight": { + "led_count": 12 + }, "ws2812": { "driver": "i2c" }, diff --git a/keyboards/mt/mt64rgb/config.h b/keyboards/mt/mt64rgb/config.h index afcb90c5d2..04a301456a 100644 --- a/keyboards/mt/mt64rgb/config.h +++ b/keyboards/mt/mt64rgb/config.h @@ -90,11 +90,6 @@ // #define RGBLIGHT_EFFECT_RGB_TEST // #define RGBLIGHT_EFFECT_ALTERNATING #define RGBLIGHT_EFFECT_TWINKLE -#define RGBLED_NUM 18 -#define RGBLIGHT_HUE_STEP 5 -#define RGBLIGHT_SAT_STEP 5 -#define RGBLIGHT_VAL_STEP 5 -#define RGBLIGHT_SLEEP /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ #define LOCKING_SUPPORT_ENABLE diff --git a/keyboards/mt/mt64rgb/info.json b/keyboards/mt/mt64rgb/info.json index 58ded7742c..fe3be4503c 100644 --- a/keyboards/mt/mt64rgb/info.json +++ b/keyboards/mt/mt64rgb/info.json @@ -8,6 +8,13 @@ "pid": "0x0001", "device_version": "0.0.1" }, + "rgblight": { + "hue_steps": 5, + "saturation_steps": 5, + "brightness_steps": 5, + "led_count": 18, + "sleep": true + }, "ws2812": { "pin": "B0" }, diff --git a/keyboards/mt/mt84/config.h b/keyboards/mt/mt84/config.h index 1a2d49d734..a915281a80 100644 --- a/keyboards/mt/mt84/config.h +++ b/keyboards/mt/mt84/config.h @@ -86,11 +86,6 @@ # define RGBLIGHT_EFFECT_STATIC_GRADIENT # define RGBLIGHT_EFFECT_RAINBOW_SWIRL # define RGBLIGHT_EFFECT_BREATHING -# define RGBLED_NUM 18 -# define RGBLIGHT_HUE_STEP 8 -# define RGBLIGHT_SAT_STEP 8 -# define RGBLIGHT_VAL_STEP 8 -# define RGBLIGHT_SLEEP /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ #define LOCKING_SUPPORT_ENABLE diff --git a/keyboards/mt/mt84/info.json b/keyboards/mt/mt84/info.json index e7a7507d7e..95131d535a 100644 --- a/keyboards/mt/mt84/info.json +++ b/keyboards/mt/mt84/info.json @@ -8,6 +8,12 @@ "pid": "0x0002", "device_version": "0.0.1" }, + "rgblight": { + "saturation_steps": 8, + "brightness_steps": 8, + "led_count": 18, + "sleep": true + }, "ws2812": { "pin": "B0" }, diff --git a/keyboards/mt/mt980/config.h b/keyboards/mt/mt980/config.h index eff34dc521..d702489ee7 100644 --- a/keyboards/mt/mt980/config.h +++ b/keyboards/mt/mt980/config.h @@ -16,7 +16,3 @@ #define RGBLIGHT_EFFECT_RGB_TEST #define RGBLIGHT_EFFECT_ALTERNATING #define RGBLIGHT_EFFECT_TWINKLE -#define RGBLED_NUM 24 -#define RGBLIGHT_HUE_STEP 8 -#define RGBLIGHT_SAT_STEP 8 -#define RGBLIGHT_VAL_STEP 8 diff --git a/keyboards/mt/mt980/info.json b/keyboards/mt/mt980/info.json index 809474914f..7f4d9b060f 100644 --- a/keyboards/mt/mt980/info.json +++ b/keyboards/mt/mt980/info.json @@ -26,6 +26,9 @@ "pin": "E2" }, "rgblight": { + "saturation_steps": 8, + "brightness_steps": 8, + "led_count": 24, "max_brightness": 185 }, "bootmagic": { diff --git a/keyboards/mt/mt980/keymaps/walker/keymap.c b/keyboards/mt/mt980/keymaps/walker/keymap.c index e98a1d71de..f0817dd33d 100644 --- a/keyboards/mt/mt980/keymaps/walker/keymap.c +++ b/keyboards/mt/mt980/keymaps/walker/keymap.c @@ -89,8 +89,8 @@ tap_dance_action_t tap_dance_actions[] = { [ALT_L1] = ACTION_TAP_DANCE_FN_ADVANCED(NULL,alt_finished, alt_reset) }; -void led_set_keymap(uint8_t usb_led) { - if (usb_led & (1<<USB_LED_NUM_LOCK)) { +bool led_update_keymap(led_t led_state) { + if (led_state.num_lock) { numlock_on = true; } else { diff --git a/keyboards/mt/ncr80/hotswap/config.h b/keyboards/mt/ncr80/hotswap/config.h index 59b05a0f9b..0c2c1b74c9 100644 --- a/keyboards/mt/ncr80/hotswap/config.h +++ b/keyboards/mt/ncr80/hotswap/config.h @@ -27,7 +27,3 @@ #define RGBLIGHT_EFFECT_RGB_TEST #define RGBLIGHT_EFFECT_ALTERNATING #define RGBLIGHT_EFFECT_TWINKLE -#define RGBLED_NUM 81 -#define RGBLIGHT_HUE_STEP 8 -#define RGBLIGHT_SAT_STEP 8 -#define RGBLIGHT_VAL_STEP 8 diff --git a/keyboards/mt/ncr80/hotswap/info.json b/keyboards/mt/ncr80/hotswap/info.json index f02a2f7405..a065a43270 100644 --- a/keyboards/mt/ncr80/hotswap/info.json +++ b/keyboards/mt/ncr80/hotswap/info.json @@ -23,6 +23,9 @@ "pin": "E2" }, "rgblight": { + "saturation_steps": 8, + "brightness_steps": 8, + "led_count": 81, "max_brightness": 180 }, "processor": "atmega32u4", diff --git a/keyboards/mt/split75/config.h b/keyboards/mt/split75/config.h index f954d5fd95..688f30a251 100644 --- a/keyboards/mt/split75/config.h +++ b/keyboards/mt/split75/config.h @@ -7,7 +7,6 @@ #define MATRIX_ROWS 8 #define MATRIX_COLS 14 -#define RGBLED_NUM 8 #define RGBLIGHT_EFFECT_BREATHING #define RGBLIGHT_EFFECT_RAINBOW_MOOD #define RGBLIGHT_EFFECT_RAINBOW_SWIRL @@ -18,6 +17,5 @@ #define RGBLIGHT_EFFECT_RGB_TEST #define RGBLIGHT_EFFECT_ALTERNATING #define RGBLIGHT_EFFECT_TWINKLE -#define RGBLIGHT_SLEEP #define I2C_START_RETRY_COUNT 1 diff --git a/keyboards/mt/split75/info.json b/keyboards/mt/split75/info.json index dc20f93dbc..0fe612ebf0 100644 --- a/keyboards/mt/split75/info.json +++ b/keyboards/mt/split75/info.json @@ -11,6 +11,10 @@ "backlight": { "pin": "D4" }, + "rgblight": { + "led_count": 8, + "sleep": true + }, "ws2812": { "driver": "i2c" }, diff --git a/keyboards/mtbkeys/mtb60/hotswap/config.h b/keyboards/mtbkeys/mtb60/hotswap/config.h index 8d17412313..8d57a9ebd6 100644 --- a/keyboards/mtbkeys/mtb60/hotswap/config.h +++ b/keyboards/mtbkeys/mtb60/hotswap/config.h @@ -17,11 +17,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #pragma once -# define RGBLED_NUM 16 -# define RGBLIGHT_HUE_STEP 8 -# define RGBLIGHT_SAT_STEP 8 -# define RGBLIGHT_VAL_STEP 8 -# define RGBLIGHT_SLEEP /* Turn RGB light off when the host goes to sleep */ # define RGBLIGHT_EFFECT_ALTERNATING # define RGBLIGHT_EFFECT_BREATHING # define RGBLIGHT_EFFECT_CHRISTMAS diff --git a/keyboards/mtbkeys/mtb60/hotswap/info.json b/keyboards/mtbkeys/mtb60/hotswap/info.json index c1acbc3b86..c4397f95a6 100644 --- a/keyboards/mtbkeys/mtb60/hotswap/info.json +++ b/keyboards/mtbkeys/mtb60/hotswap/info.json @@ -8,6 +8,12 @@ "pid": "0x0001", "device_version": "0.0.1" }, + "rgblight": { + "saturation_steps": 8, + "brightness_steps": 8, + "led_count": 16, + "sleep": true + }, "ws2812": { "pin": "D4" }, diff --git a/keyboards/mtbkeys/mtb60/solder/config.h b/keyboards/mtbkeys/mtb60/solder/config.h index 8d17412313..8d57a9ebd6 100644 --- a/keyboards/mtbkeys/mtb60/solder/config.h +++ b/keyboards/mtbkeys/mtb60/solder/config.h @@ -17,11 +17,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #pragma once -# define RGBLED_NUM 16 -# define RGBLIGHT_HUE_STEP 8 -# define RGBLIGHT_SAT_STEP 8 -# define RGBLIGHT_VAL_STEP 8 -# define RGBLIGHT_SLEEP /* Turn RGB light off when the host goes to sleep */ # define RGBLIGHT_EFFECT_ALTERNATING # define RGBLIGHT_EFFECT_BREATHING # define RGBLIGHT_EFFECT_CHRISTMAS diff --git a/keyboards/mtbkeys/mtb60/solder/info.json b/keyboards/mtbkeys/mtb60/solder/info.json index 5cf3a327a1..a7a3a9a951 100644 --- a/keyboards/mtbkeys/mtb60/solder/info.json +++ b/keyboards/mtbkeys/mtb60/solder/info.json @@ -8,6 +8,12 @@ "pid": "0x0000", "device_version": "0.0.1" }, + "rgblight": { + "saturation_steps": 8, + "brightness_steps": 8, + "led_count": 16, + "sleep": true + }, "ws2812": { "pin": "B0" }, diff --git a/keyboards/mwstudio/alicekk/config.h b/keyboards/mwstudio/alicekk/config.h index 2e8b3f3bec..79ceffd306 100644 --- a/keyboards/mwstudio/alicekk/config.h +++ b/keyboards/mwstudio/alicekk/config.h @@ -18,7 +18,6 @@ #define RGB_MATRIX_MAXIMUM_BRIGHTNESS 200 #define RGB_MATRIX_DEFAULT_VAL RGB_MATRIX_MAXIMUM_BRIGHTNESS -#define RGBLED_NUM 87 #define RGBLIGHT_EFFECT_BREATHING #define RGBLIGHT_EFFECT_RAINBOW_MOOD @@ -30,7 +29,3 @@ #define RGBLIGHT_EFFECT_RGB_TEST #define RGBLIGHT_EFFECT_ALTERNATING #define RGBLIGHT_EFFECT_TWINKLE - -#define RGBLIGHT_HUE_STEP 8 -#define RGBLIGHT_SAT_STEP 8 -#define RGBLIGHT_VAL_STEP 8 diff --git a/keyboards/mwstudio/alicekk/info.json b/keyboards/mwstudio/alicekk/info.json index b77bbd8bdf..4a29fd7135 100644 --- a/keyboards/mwstudio/alicekk/info.json +++ b/keyboards/mwstudio/alicekk/info.json @@ -21,6 +21,9 @@ "pin": "B1" }, "rgblight": { + "saturation_steps": 8, + "brightness_steps": 8, + "led_count": 87, "max_brightness": 200 }, "processor": "STM32F103", diff --git a/keyboards/mwstudio/alicekk/keymaps/via/keymap.c b/keyboards/mwstudio/alicekk/keymaps/via/keymap.c index 92e893d5c5..5c3ae235b1 100644 --- a/keyboards/mwstudio/alicekk/keymaps/via/keymap.c +++ b/keyboards/mwstudio/alicekk/keymaps/via/keymap.c @@ -51,44 +51,11 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { ), }; - -#ifdef ENCODER_ENABLE -static uint8_t encoder_state[NUM_ENCODERS] = {0}; -static keypos_t encoder_cw[NUM_ENCODERS] = {{6, 4}}; -static keypos_t encoder_ccw[NUM_ENCODERS] = {{7, 4}}; - -void encoder_action_unregister(void) { - for (uint8_t index = 0; index < NUM_ENCODERS; ++index) { - if (encoder_state[index]) { - keyevent_t encoder_event = (keyevent_t) { - .key = encoder_state[index] >> 1 ? encoder_cw[index] : encoder_ccw[index], - .pressed = false, - .time = timer_read(), - .type = KEY_EVENT - }; - encoder_state[index] = 0; - action_exec(encoder_event); - } - } -} - -void encoder_action_register(uint8_t index, bool clockwise) { - keyevent_t encoder_event = (keyevent_t) { - .key = clockwise ? encoder_cw[index] : encoder_ccw[index], - .pressed = true, - .time = timer_read(), - .type = KEY_EVENT - }; - encoder_state[index] = (clockwise ^ 1) | (clockwise << 1); - action_exec(encoder_event); -} - -void matrix_scan_user(void) { - encoder_action_unregister(); -} - -bool encoder_update_user(uint8_t index, bool clockwise) { - encoder_action_register(index, clockwise); - return false; +#ifdef ENCODER_MAP_ENABLE +const uint16_t PROGMEM encoder_map[][NUM_ENCODERS][NUM_DIRECTIONS] = { + [0] = { ENCODER_CCW_CW(KC_VOLD, KC_VOLU) }, + [1] = { ENCODER_CCW_CW(_______, _______) }, + [2] = { ENCODER_CCW_CW(_______, _______) }, + [3] = { ENCODER_CCW_CW(_______, _______) }, }; #endif diff --git a/keyboards/mwstudio/alicekk/keymaps/via/rules.mk b/keyboards/mwstudio/alicekk/keymaps/via/rules.mk index 541a15608a..f1adcab005 100644 --- a/keyboards/mwstudio/alicekk/keymaps/via/rules.mk +++ b/keyboards/mwstudio/alicekk/keymaps/via/rules.mk @@ -1,2 +1,2 @@ VIA_ENABLE = yes -LTO_ENABLE = no +ENCODER_MAP_ENABLE = yes diff --git a/keyboards/mwstudio/mw65_black/config.h b/keyboards/mwstudio/mw65_black/config.h deleted file mode 100644 index f987360d4a..0000000000 --- a/keyboards/mwstudio/mw65_black/config.h +++ /dev/null @@ -1,22 +0,0 @@ -/* Copyright 2021 TW59420 <https://github.com/TW59420> - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see <http://www.gnu.org/licenses/>. - */ - -#pragma once - - #define RGBLED_NUM 21 - #define RGBLIGHT_HUE_STEP 8 - #define RGBLIGHT_SAT_STEP 8 - #define RGBLIGHT_VAL_STEP 8 diff --git a/keyboards/mwstudio/mw65_black/info.json b/keyboards/mwstudio/mw65_black/info.json index baa73a6e3b..2646340658 100644 --- a/keyboards/mwstudio/mw65_black/info.json +++ b/keyboards/mwstudio/mw65_black/info.json @@ -8,6 +8,11 @@ "pid": "0x6500", "device_version": "0.0.1" }, + "rgblight": { + "saturation_steps": 8, + "brightness_steps": 8, + "led_count": 21 + }, "ws2812": { "pin": "C7" }, diff --git a/keyboards/mwstudio/mw65_rgb/info.json b/keyboards/mwstudio/mw65_rgb/info.json index c2a8a6c188..cb2e62c6e9 100644 --- a/keyboards/mwstudio/mw65_rgb/info.json +++ b/keyboards/mwstudio/mw65_rgb/info.json @@ -43,10 +43,7 @@ {"matrix": [0, 11], "x": 11, "y": 0}, {"matrix": [0, 12], "x": 12, "y": 0}, {"matrix": [0, 13], "x": 13, "y": 0, "w": 2}, - - {"matrix": [4, 4], "x": 15, "y": 0, "w": 0.5}, {"matrix": [0, 14], "x": 15.5, "y": 0}, - {"matrix": [4, 3], "x": 16.5, "y": 0, "w": 0.5}, {"matrix": [1, 0], "x": 0, "y": 1, "w": 1.5}, {"matrix": [1, 1], "x": 1.5, "y": 1}, diff --git a/keyboards/mwstudio/mw65_rgb/keymaps/default/keymap.c b/keyboards/mwstudio/mw65_rgb/keymaps/default/keymap.c index 8153790b14..77750b5174 100644 --- a/keyboards/mwstudio/mw65_rgb/keymaps/default/keymap.c +++ b/keyboards/mwstudio/mw65_rgb/keymaps/default/keymap.c @@ -18,7 +18,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { [0] = LAYOUT( - KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_VOLD, KC_DEL, KC_VOLU, + KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_DEL, KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_PGUP, KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, KC_PGDN, KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_UP, RGB_TOG, @@ -26,7 +26,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { ), [1] = LAYOUT( - KC_GRV, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, _______, _______, RGB_HUI, _______, + KC_GRV, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, _______, RGB_HUI, RGB_TOG, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, RGB_HUD, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, RGB_SAI, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, RGB_VAI, RGB_SAD, diff --git a/keyboards/mwstudio/mw65_rgb/keymaps/horrortroll/keymap.c b/keyboards/mwstudio/mw65_rgb/keymaps/horrortroll/keymap.c index ef5ea90b61..6179d4cdc1 100644 --- a/keyboards/mwstudio/mw65_rgb/keymaps/horrortroll/keymap.c +++ b/keyboards/mwstudio/mw65_rgb/keymaps/horrortroll/keymap.c @@ -48,7 +48,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { */ /* Row: 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 */ [_BASE] = LAYOUT( - KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_VOLD, KC_HOME, KC_VOLU, + KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_HOME, KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_END, KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, KC_PGUP, KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_UP, KC_PGDN, @@ -71,7 +71,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { */ /* Row: 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 */ [_FN] = LAYOUT( - KC_GRV, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_HOME, _______, _______, _______, + KC_GRV, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_HOME, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_PAUSE, KC_INS, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_PSCR, KC_DEL, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, diff --git a/keyboards/mwstudio/mw65_rgb/keymaps/horrortroll/keymap_stuff.h b/keyboards/mwstudio/mw65_rgb/keymaps/horrortroll/keymap_stuff.h index 7fadbdc39c..bd979e9c81 100644 --- a/keyboards/mwstudio/mw65_rgb/keymaps/horrortroll/keymap_stuff.h +++ b/keyboards/mwstudio/mw65_rgb/keymaps/horrortroll/keymap_stuff.h @@ -273,19 +273,6 @@ bool process_record_user(uint16_t keycode, keyrecord_t *record) { return true; } -#ifdef ENCODER_ENABLE -bool encoder_update_user(uint8_t index, bool clockwise) { - if (index == 0) { - if (clockwise) { - tap_code(dynamic_keymap_get_keycode(biton32(layer_state), 4, 3)); - } else { - tap_code(dynamic_keymap_get_keycode(biton32(layer_state), 4, 4)); - } - } - return true; -} -#endif - bool rgb_matrix_indicators_user(void) { switch (biton32(layer_state)) { case _FN: diff --git a/keyboards/mwstudio/mw65_rgb/keymaps/thearesia/keymap.c b/keyboards/mwstudio/mw65_rgb/keymaps/thearesia/keymap.c index f4625bf7a7..e51a5e3ab8 100644 --- a/keyboards/mwstudio/mw65_rgb/keymaps/thearesia/keymap.c +++ b/keyboards/mwstudio/mw65_rgb/keymaps/thearesia/keymap.c @@ -79,7 +79,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { */ /* Row: 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 */ [_BASE] = LAYOUT( - KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_VOLD, KC_HOME, KC_VOLU, + KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_HOME, KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_END, KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, KC_PGUP, KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_UP, KC_PGDN, @@ -101,7 +101,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { */ /* Row: 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 */ [_FN] = LAYOUT( - KC_GRV, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_HOME, _______, _______, _______, + KC_GRV, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_HOME, _______, QK_BOOT, _______, _______, _______, _______, _______, _______, _______, RGB_HUD, RGB_HUI, _______, _______, _______, KC_PAUSE, KC_INS, _______, _______, _______, _______, _______, _______, _______, _______, RGB_SAD, RGB_SAI, _______, _______, KC_PSCR, KC_DEL, _______, _______, _______, _______, _______, _______, _______, RGB_SPD, RGB_SPI, _______, _______, _______, RGB_VAI, RGB_TOG, @@ -168,19 +168,6 @@ bool process_record_user(uint16_t keycode, keyrecord_t *record) { return true; } -#ifdef ENCODER_ENABLE -bool encoder_update_user(uint8_t index, bool clockwise) { - if (index == 0) { - if (clockwise) { - tap_code(dynamic_keymap_get_keycode(biton32(layer_state), 4, 3)); - } else { - tap_code(dynamic_keymap_get_keycode(biton32(layer_state), 4, 4)); - } - } - return true; -} -#endif - bool rgb_matrix_indicators_user(void) { HSV hsv = rgb_matrix_config.hsv; uint8_t time = scale16by8(g_rgb_timer, qadd8(32, 1)); diff --git a/keyboards/mwstudio/mw65_rgb/keymaps/via/keymap.c b/keyboards/mwstudio/mw65_rgb/keymaps/via/keymap.c index a1b54a8411..827cd0db38 100644 --- a/keyboards/mwstudio/mw65_rgb/keymaps/via/keymap.c +++ b/keyboards/mwstudio/mw65_rgb/keymaps/via/keymap.c @@ -34,7 +34,7 @@ enum custom_keycodes { const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { [0] = LAYOUT( - KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_VOLD, KC_DEL, KC_VOLU, + KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_DEL, KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_PGUP, KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, KC_PGDN, KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_UP, RGB_TOG, @@ -42,7 +42,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { ), [1] = LAYOUT( - KC_GRV, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, _______, _______, RGB_HUI, _______, + KC_GRV, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, _______, RGB_HUI, RGB_TOG, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, RGB_HUD, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, USER00, RGB_SAI, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, USER01, RGB_VAI, RGB_SAD, @@ -50,7 +50,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { ), [2] = LAYOUT( - _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, @@ -58,7 +58,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { ), [3] = LAYOUT( - _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, @@ -96,17 +96,13 @@ bool process_record_user(uint16_t keycode, keyrecord_t *record) { } } -#ifdef ENCODER_ENABLE -bool encoder_update_user(uint8_t index, bool clockwise) { - if (index == 0) { - if (clockwise) { - tap_code(dynamic_keymap_get_keycode(get_highest_layer(layer_state), 4, 3)); - } else { - tap_code(dynamic_keymap_get_keycode(get_highest_layer(layer_state), 4, 4)); - } - } - return true; -} +#ifdef ENCODER_MAP_ENABLE +const uint16_t PROGMEM encoder_map[][NUM_ENCODERS][NUM_DIRECTIONS] = { + [0] = { ENCODER_CCW_CW(KC_VOLD, KC_VOLU) }, + [1] = { ENCODER_CCW_CW(_______, _______) }, + [2] = { ENCODER_CCW_CW(_______, _______) }, + [3] = { ENCODER_CCW_CW(_______, _______) }, +}; #endif bool rgb_matrix_indicators_advanced_user(uint8_t led_min, uint8_t led_max) { diff --git a/keyboards/mwstudio/mw65_rgb/keymaps/via/rules.mk b/keyboards/mwstudio/mw65_rgb/keymaps/via/rules.mk index 36b7ba9cbc..1189f4ad19 100644 --- a/keyboards/mwstudio/mw65_rgb/keymaps/via/rules.mk +++ b/keyboards/mwstudio/mw65_rgb/keymaps/via/rules.mk @@ -1,2 +1,3 @@ VIA_ENABLE = yes LTO_ENABLE = yes +ENCODER_MAP_ENABLE = yes diff --git a/keyboards/mwstudio/mw660/config.h b/keyboards/mwstudio/mw660/config.h index 8c5cad9bef..87659c1f67 100644 --- a/keyboards/mwstudio/mw660/config.h +++ b/keyboards/mwstudio/mw660/config.h @@ -16,9 +16,6 @@ #pragma once -#define DRIVER_LED_TOTAL 34 -#define RGBLED_NUM 34 - #define WS2812_PWM_DRIVER PWMD4 // default: PWMD2 #define WS2812_PWM_CHANNEL 3 // default: 2 //#define WS2812_PWM_COMPLEMENTARY_OUTPUT // Define for a complementary timer output (TIMx_CHyN); omit for a normal timer output (TIMx_CHy). diff --git a/keyboards/mwstudio/mw660/info.json b/keyboards/mwstudio/mw660/info.json index 5d1edb296f..fdbd7564a7 100644 --- a/keyboards/mwstudio/mw660/info.json +++ b/keyboards/mwstudio/mw660/info.json @@ -12,6 +12,9 @@ "nkro": true, "rgblight": true }, + "rgblight": { + "led_count": 34 + }, "ws2812": { "pin": "B8" }, diff --git a/keyboards/mwstudio/mw75/config.h b/keyboards/mwstudio/mw75/config.h index 0a9b073ce1..e5dd4fd03c 100644 --- a/keyboards/mwstudio/mw75/config.h +++ b/keyboards/mwstudio/mw75/config.h @@ -16,12 +16,9 @@ #pragma once -#define RGBLIGHT_SLEEP - #define RGB_MATRIX_MAXIMUM_BRIGHTNESS 200 #define RGB_MATRIX_DEFAULT_VAL RGB_MATRIX_MAXIMUM_BRIGHTNESS #define RGB_MATRIX_LED_COUNT 97 -#define RGBLED_NUM 97 #define RGB_MATRIX_KEYPRESSES #define ENABLE_RGB_MATRIX_ALPHAS_MODS @@ -68,7 +65,3 @@ #define ENABLE_RGB_MATRIX_MULTISPLASH #define ENABLE_RGB_MATRIX_SOLID_SPLASH #define ENABLE_RGB_MATRIX_SOLID_MULTISPLASH - -#define RGBLIGHT_HUE_STEP 8 -#define RGBLIGHT_SAT_STEP 8 -#define RGBLIGHT_VAL_STEP 8 diff --git a/keyboards/mwstudio/mw75/info.json b/keyboards/mwstudio/mw75/info.json index cc2e3dc408..95e536a57e 100644 --- a/keyboards/mwstudio/mw75/info.json +++ b/keyboards/mwstudio/mw75/info.json @@ -24,6 +24,12 @@ "bootmagic": { "matrix": [0, 1] }, + "rgblight": { + "saturation_steps": 8, + "brightness_steps": 8, + "led_count": 97, + "sleep": true + }, "ws2812": { "pin": "B3" }, diff --git a/keyboards/mwstudio/mw75r2/config.h b/keyboards/mwstudio/mw75r2/config.h index ded31181aa..863a090d47 100644 --- a/keyboards/mwstudio/mw75r2/config.h +++ b/keyboards/mwstudio/mw75r2/config.h @@ -16,12 +16,9 @@ #pragma once -#define RGBLIGHT_SLEEP - #define RGB_MATRIX_MAXIMUM_BRIGHTNESS 255 #define RGB_MATRIX_DEFAULT_VAL RGB_MATRIX_MAXIMUM_BRIGHTNESS #define RGB_MATRIX_LED_COUNT 21 -#define RGBLED_NUM 21 #define ENABLE_RGB_MATRIX_ALPHAS_MODS #define ENABLE_RGB_MATRIX_BREATHING @@ -43,7 +40,3 @@ #define ENABLE_RGB_MATRIX_HUE_WAVE #define ENABLE_RGB_MATRIX_PIXEL_FRACTAL #define ENABLE_RGB_MATRIX_PIXEL_RAIN - -#define RGBLIGHT_HUE_STEP 8 -#define RGBLIGHT_SAT_STEP 8 -#define RGBLIGHT_VAL_STEP 8 diff --git a/keyboards/mwstudio/mw75r2/info.json b/keyboards/mwstudio/mw75r2/info.json index f86df57fe5..44850a8655 100644 --- a/keyboards/mwstudio/mw75r2/info.json +++ b/keyboards/mwstudio/mw75r2/info.json @@ -8,6 +8,12 @@ "pid": "0x7502", "device_version": "0.0.1" }, + "rgblight": { + "saturation_steps": 8, + "brightness_steps": 8, + "led_count": 21, + "sleep": true + }, "ws2812": { "pin": "B3" }, diff --git a/keyboards/mwstudio/mw75r2/keymaps/via/keymap.c b/keyboards/mwstudio/mw75r2/keymaps/via/keymap.c index 633629abc7..777a0dd6f4 100644 --- a/keyboards/mwstudio/mw75r2/keymaps/via/keymap.c +++ b/keyboards/mwstudio/mw75r2/keymaps/via/keymap.c @@ -104,48 +104,15 @@ bool process_record_user(uint16_t keycode, keyrecord_t *record) { } } -#ifdef ENCODER_ENABLE -static uint8_t encoder_state[NUM_ENCODERS] = {0}; -static keypos_t encoder_cw[NUM_ENCODERS] = {{3, 5}}; -static keypos_t encoder_ccw[NUM_ENCODERS] = {{4, 5}}; - -void encoder_action_unregister(void) { - for (uint8_t index = 0; index < NUM_ENCODERS; ++index) { - if (encoder_state[index]) { - keyevent_t encoder_event = (keyevent_t) { - .key = encoder_state[index] >> 1 ? encoder_cw[index] : encoder_ccw[index], - .pressed = false, - .time = timer_read(), - .type = KEY_EVENT - }; - encoder_state[index] = 0; - action_exec(encoder_event); - } - } -} - -void encoder_action_register(uint8_t index, bool clockwise) { - keyevent_t encoder_event = (keyevent_t) { - .key = clockwise ? encoder_cw[index] : encoder_ccw[index], - .pressed = true, - .time = timer_read(), - .type = KEY_EVENT - }; - encoder_state[index] = (clockwise ^ 1) | (clockwise << 1); - action_exec(encoder_event); -} - -void matrix_scan_user(void) { - encoder_action_unregister(); -} - -bool encoder_update_user(uint8_t index, bool clockwise) { - encoder_action_register(index, clockwise); - return true; +#ifdef ENCODER_MAP_ENABLE +const uint16_t PROGMEM encoder_map[][NUM_ENCODERS][NUM_DIRECTIONS] = { + [0] = { ENCODER_CCW_CW(KC_VOLD, KC_VOLU) }, + [1] = { ENCODER_CCW_CW(_______, _______) }, + [2] = { ENCODER_CCW_CW(_______, _______) }, + [3] = { ENCODER_CCW_CW(_______, _______) }, }; #endif - bool rgb_matrix_indicators_advanced_user(uint8_t led_min, uint8_t led_max) { if (user_config.top_rgb_change) diff --git a/keyboards/mwstudio/mw75r2/keymaps/via/rules.mk b/keyboards/mwstudio/mw75r2/keymaps/via/rules.mk index 36b7ba9cbc..1189f4ad19 100644 --- a/keyboards/mwstudio/mw75r2/keymaps/via/rules.mk +++ b/keyboards/mwstudio/mw75r2/keymaps/via/rules.mk @@ -1,2 +1,3 @@ VIA_ENABLE = yes LTO_ENABLE = yes +ENCODER_MAP_ENABLE = yes diff --git a/keyboards/mxss/config.h b/keyboards/mxss/config.h index d33ee88ce8..001b7f28a4 100644 --- a/keyboards/mxss/config.h +++ b/keyboards/mxss/config.h @@ -28,10 +28,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #define RGBLIGHT_EFFECT_RGB_TEST #define RGBLIGHT_EFFECT_ALTERNATING #define RGBLIGHT_EFFECT_TWINKLE -#define RGBLED_NUM 20 -#define RGBLIGHT_HUE_STEP 8 -#define RGBLIGHT_SAT_STEP 8 -#define RGBLIGHT_VAL_STEP 8 /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ #define LOCKING_SUPPORT_ENABLE diff --git a/keyboards/mxss/info.json b/keyboards/mxss/info.json index 7828803ae1..fbd9b7f6ca 100644 --- a/keyboards/mxss/info.json +++ b/keyboards/mxss/info.json @@ -8,6 +8,11 @@ "pid": "0x5353", "device_version": "0.0.1" }, + "rgblight": { + "saturation_steps": 8, + "brightness_steps": 8, + "led_count": 20 + }, "ws2812": { "pin": "C7" }, diff --git a/keyboards/nack/config.h b/keyboards/nack/config.h index 7240672afe..adb2cf5d87 100644 --- a/keyboards/nack/config.h +++ b/keyboards/nack/config.h @@ -17,18 +17,12 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #pragma once -#define TAPPING_TOGGLE 2 - #ifdef RGB_MATRIX_ENABLE #define WS2812_SPI SPID1 #define WS2812_SPI_MOSI_PAL_MODE 5 - #define RGBLED_NUM 52 - #define RGB_MATRIX_LED_COUNT RGBLED_NUM + #define RGB_MATRIX_LED_COUNT 52 #define RGB_MATRIX_MAXIMUM_BRIGHTNESS 128 // Max brightness of LEDs #define RGB_MATRIX_DEFAULT_VAL 64 - #define RGB_MATRIX_HUE_STEP 10 - #define RGB_MATRIX_SAT_STEP 10 - #define RGB_MATRIX_VAL_STEP 10 // RGB Matrix Animation modes. Explicitly enabled // For full list of effects, see: // https://docs.qmk.fm/#/feature_rgb_matrix?id=rgb-matrix-effects diff --git a/keyboards/nack/info.json b/keyboards/nack/info.json index 827e0fec0e..0c65f81961 100644 --- a/keyboards/nack/info.json +++ b/keyboards/nack/info.json @@ -13,7 +13,10 @@ "driver": "spi" }, "rgb_matrix": { - "driver": "WS2812" + "driver": "WS2812", + "hue_steps": 10, + "sat_steps": 10, + "val_steps": 10 }, "matrix_pins": { "cols": ["A6", "A7", "A8", "A9", "A10", "B0", "B1", "B2", "B6", "B7", "C13", "C14", "C15"], @@ -23,6 +26,9 @@ "processor": "STM32F303", "bootloader": "stm32-dfu", "board": "QMK_PROTON_C", + "tapping": { + "toggle": 2 + }, "layout_aliases": { "LAYOUT": "LAYOUT_ortho_4x13" }, diff --git a/keyboards/nacly/splitreus62/config.h b/keyboards/nacly/splitreus62/config.h index 9c6773547e..fe1acecf24 100644 --- a/keyboards/nacly/splitreus62/config.h +++ b/keyboards/nacly/splitreus62/config.h @@ -25,9 +25,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. /* Locking resynchronize hack */ #define LOCKING_RESYNC_ENABLE -#define RGBLED_NUM 12 // Number of LEDs - -#define RGBLED_SPLIT { 6, 6 } /* * Feature disable options * These options are also useful to firmware size reduction. diff --git a/keyboards/nacly/splitreus62/info.json b/keyboards/nacly/splitreus62/info.json index 5c61b6f5fe..c499277889 100644 --- a/keyboards/nacly/splitreus62/info.json +++ b/keyboards/nacly/splitreus62/info.json @@ -16,6 +16,10 @@ "split": { "soft_serial_pin": "D0" }, + "rgblight": { + "led_count": 12, + "split_count": [6, 6] + }, "ws2812": { "pin": "B1" }, diff --git a/keyboards/nacly/ua62/config.h b/keyboards/nacly/ua62/config.h index 0391f174c9..643a3b52db 100644 --- a/keyboards/nacly/ua62/config.h +++ b/keyboards/nacly/ua62/config.h @@ -22,8 +22,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. /* Locking resynchronize hack */ #define LOCKING_RESYNC_ENABLE -#define TAPPING_TERM 200 - /* * Feature disable options * These options are also useful to firmware size reduction. diff --git a/keyboards/nasu/rules.mk b/keyboards/nasu/rules.mk index 7000bb6571..7c0709f41e 100644 --- a/keyboards/nasu/rules.mk +++ b/keyboards/nasu/rules.mk @@ -1,11 +1,6 @@ # Wildcard to allow APM32 MCU DFU_SUFFIX_ARGS = -v FFFF -p FFFF -# Do not put the microcontroller into power saving mode -# when we get USB suspend event. We want it to keep updating -# backlight effects. -OPT_DEFS += -DCORTEX_ENABLE_WFI_IDLE=TRUE - # Build Options # change yes to no to disable # diff --git a/keyboards/ncc1701kb/config.h b/keyboards/ncc1701kb/config.h deleted file mode 100644 index bd03d32227..0000000000 --- a/keyboards/ncc1701kb/config.h +++ /dev/null @@ -1,20 +0,0 @@ -/* -Copyright 2012 Jun Wako <wakojun@gmail.com> - -This program is free software: you can redistribute it and/or modify -it under the terms of the GNU General Public License as published by -the Free Software Foundation, either version 2 of the License, or -(at your option) any later version. - -This program is distributed in the hope that it will be useful, -but WITHOUT ANY WARRANTY; without even the implied warranty of -MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -GNU General Public License for more details. - -You should have received a copy of the GNU General Public License -along with this program. If not, see <http://www.gnu.org/licenses/>. -*/ - -#pragma once - -#define TAPPING_TERM 200 diff --git a/keyboards/neito/config.h b/keyboards/neito/config.h index ef9b518920..7117516afb 100644 --- a/keyboards/neito/config.h +++ b/keyboards/neito/config.h @@ -29,12 +29,3 @@ #define RGBLIGHT_EFFECT_RGB_TEST #define RGBLIGHT_EFFECT_ALTERNATING #define RGBLIGHT_EFFECT_TWINKLE -#define RGBLED_NUM 11 -#define RGBLIGHT_LED_MAP { 4, 3, 2, 1, 0, 10, 9, 8, 7, 6, 5 } -#define RGBLIGHT_HUE_STEP 8 -#define RGBLIGHT_SAT_STEP 8 -#define RGBLIGHT_VAL_STEP 8 - -/* Handle volume control issue with rotary encoder */ - -#define TAP_CODE_DELAY 10 diff --git a/keyboards/neito/info.json b/keyboards/neito/info.json index a226d236c3..98b135756b 100644 --- a/keyboards/neito/info.json +++ b/keyboards/neito/info.json @@ -18,6 +18,9 @@ {"pin_a": "B7", "pin_b": "B0"} ] }, + "qmk": { + "tap_keycode_delay": 10 + }, "backlight": { "pin": "B5", "levels": 5, @@ -30,7 +33,11 @@ "pin": "D5" }, "rgblight": { - "max_brightness": 200 + "saturation_steps": 8, + "brightness_steps": 8, + "led_count": 11, + "max_brightness": 200, + "led_map": [4, 3, 2, 1, 0, 10, 9, 8, 7, 6, 5] }, "processor": "atmega32u4", "bootloader": "atmel-dfu", diff --git a/keyboards/nemui/rules.mk b/keyboards/nemui/rules.mk index 0aeca0dd9f..7f4f202a1b 100644 --- a/keyboards/nemui/rules.mk +++ b/keyboards/nemui/rules.mk @@ -11,5 +11,3 @@ BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow AUDIO_ENABLE = no # Audio output -# Enter lower-power sleep mode when on the ChibiOS idle thread -OPT_DEFS += -DCORTEX_ENABLE_WFI_IDLE=TRUE diff --git a/keyboards/neokeys/g67/element_hs/config.h b/keyboards/neokeys/g67/element_hs/config.h index e71dda2781..ca462e41c0 100644 --- a/keyboards/neokeys/g67/element_hs/config.h +++ b/keyboards/neokeys/g67/element_hs/config.h @@ -17,11 +17,6 @@ #pragma once #if defined(RGBLIGHT_ENABLE) - #define RGBLED_NUM 77 - #define RGBLIGHT_HUE_STEP 8 - #define RGBLIGHT_SAT_STEP 8 - #define RGBLIGHT_VAL_STEP 8 - #define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */ /*== all animations enable ==*/ #define RGBLIGHT_EFFECT_BREATHING #define RGBLIGHT_EFFECT_RAINBOW_MOOD diff --git a/keyboards/neokeys/g67/element_hs/info.json b/keyboards/neokeys/g67/element_hs/info.json index b744c334b5..7cfe898edc 100644 --- a/keyboards/neokeys/g67/element_hs/info.json +++ b/keyboards/neokeys/g67/element_hs/info.json @@ -17,7 +17,11 @@ "pin": "F0" }, "rgblight": { - "max_brightness": 150 + "saturation_steps": 8, + "brightness_steps": 8, + "led_count": 77, + "max_brightness": 150, + "sleep": true }, "processor": "atmega32u4", "bootloader": "atmel-dfu", diff --git a/keyboards/neokeys/g67/hotswap/config.h b/keyboards/neokeys/g67/hotswap/config.h index 3165d58b2f..8bb96c992f 100644 --- a/keyboards/neokeys/g67/hotswap/config.h +++ b/keyboards/neokeys/g67/hotswap/config.h @@ -17,11 +17,6 @@ #pragma once #if defined(RGBLIGHT_ENABLE) - #define RGBLED_NUM 77 - #define RGBLIGHT_HUE_STEP 8 - #define RGBLIGHT_SAT_STEP 8 - #define RGBLIGHT_VAL_STEP 8 - #define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */ #define RGBLIGHT_EFFECT_BREATHING #define RGBLIGHT_EFFECT_RAINBOW_MOOD #define RGBLIGHT_EFFECT_RAINBOW_SWIRL diff --git a/keyboards/neokeys/g67/hotswap/info.json b/keyboards/neokeys/g67/hotswap/info.json index 1ae8869ee9..1d6fc432ae 100644 --- a/keyboards/neokeys/g67/hotswap/info.json +++ b/keyboards/neokeys/g67/hotswap/info.json @@ -17,7 +17,11 @@ "pin": "F0" }, "rgblight": { - "max_brightness": 150 + "saturation_steps": 8, + "brightness_steps": 8, + "led_count": 77, + "max_brightness": 150, + "sleep": true }, "processor": "atmega32u4", "bootloader": "atmel-dfu", diff --git a/keyboards/neokeys/g67/soldered/config.h b/keyboards/neokeys/g67/soldered/config.h index 1dfb4e03ac..8bb96c992f 100644 --- a/keyboards/neokeys/g67/soldered/config.h +++ b/keyboards/neokeys/g67/soldered/config.h @@ -17,11 +17,6 @@ #pragma once #if defined(RGBLIGHT_ENABLE) - #define RGBLED_NUM 18 - #define RGBLIGHT_HUE_STEP 8 - #define RGBLIGHT_SAT_STEP 8 - #define RGBLIGHT_VAL_STEP 8 - #define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */ #define RGBLIGHT_EFFECT_BREATHING #define RGBLIGHT_EFFECT_RAINBOW_MOOD #define RGBLIGHT_EFFECT_RAINBOW_SWIRL diff --git a/keyboards/neokeys/g67/soldered/info.json b/keyboards/neokeys/g67/soldered/info.json index 87c4d0c03f..111d721254 100644 --- a/keyboards/neokeys/g67/soldered/info.json +++ b/keyboards/neokeys/g67/soldered/info.json @@ -22,7 +22,11 @@ "pin": "F0" }, "rgblight": { - "max_brightness": 150 + "saturation_steps": 8, + "brightness_steps": 8, + "led_count": 18, + "max_brightness": 150, + "sleep": true }, "processor": "atmega32u4", "bootloader": "atmel-dfu", diff --git a/keyboards/neopad/config.h b/keyboards/neopad/config.h deleted file mode 100755 index 6200d5a594..0000000000 --- a/keyboards/neopad/config.h +++ /dev/null @@ -1,20 +0,0 @@ -/* -Copyright 2021 rookiebwoy - -This program is free software: you can redistribute it and/or modify -it under the terms of the GNU General Public License as published by -the Free Software Foundation, either version 2 of the License, or -(at your option) any later version. - -This program is distributed in the hope that it will be useful, -but WITHOUT ANY WARRANTY; without even the implied warranty of -MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -GNU General Public License for more details. - -You should have received a copy of the GNU General Public License -along with this program. If not, see <http://www.gnu.org/licenses/>. -*/ -#pragma once - -/* Reduce tapdance required taps from 5 to 2 */ -#define TAPPING_TOGGLE 2 diff --git a/keyboards/neopad/rev1/info.json b/keyboards/neopad/rev1/info.json index 8a8f357c96..0a0340c06d 100755 --- a/keyboards/neopad/rev1/info.json +++ b/keyboards/neopad/rev1/info.json @@ -21,6 +21,9 @@ }, "processor": "atmega32u4", "bootloader": "caterina", + "tapping": { + "toggle": 2 + }, "layouts": { "LAYOUT": { "layout": [ diff --git a/keyboards/neson_design/700e/config.h b/keyboards/neson_design/700e/config.h index e35f0c4d0a..9a17556610 100644 --- a/keyboards/neson_design/700e/config.h +++ b/keyboards/neson_design/700e/config.h @@ -38,7 +38,6 @@ #define RGB_MATRIX_LED_COUNT (DRIVER_1_LED_TOTAL+DRIVER_2_LED_TOTAL) //rgb light setting -#define RGBLED_NUM 68 #define RGBLIGHT_EFFECT_BREATHING #define RGBLIGHT_EFFECT_RAINBOW_MOOD #define RGBLIGHT_EFFECT_RAINBOW_SWIRL @@ -48,8 +47,5 @@ #define RGBLIGHT_EFFECT_STATIC_GRADIENT #define RGBLIGHT_EFFECT_RGB_TEST #define RGBLIGHT_EFFECT_ALTERNATING -#define RGBLIGHT_HUE_STEP 8 -#define RGBLIGHT_SAT_STEP 8 -#define RGBLIGHT_VAL_STEP 8 #define USB_SUSPEND_WAKEUP_DELAY 1000 diff --git a/keyboards/neson_design/700e/info.json b/keyboards/neson_design/700e/info.json index 3f339ad554..addeafdaea 100644 --- a/keyboards/neson_design/700e/info.json +++ b/keyboards/neson_design/700e/info.json @@ -16,6 +16,11 @@ "indicators": { "caps_lock": "F5" }, + "rgblight": { + "saturation_steps": 8, + "brightness_steps": 8, + "led_count": 68 + }, "ws2812": { "pin": "D5" }, diff --git a/keyboards/neson_design/n6/config.h b/keyboards/neson_design/n6/config.h index 9a4c8240c0..f9e1463f64 100644 --- a/keyboards/neson_design/n6/config.h +++ b/keyboards/neson_design/n6/config.h @@ -38,7 +38,6 @@ #define RGB_MATRIX_LED_COUNT (DRIVER_1_LED_TOTAL+DRIVER_2_LED_TOTAL) //rgb light setting -#define RGBLED_NUM 65 #define RGBLIGHT_EFFECT_BREATHING #define RGBLIGHT_EFFECT_RAINBOW_MOOD #define RGBLIGHT_EFFECT_RAINBOW_SWIRL @@ -49,6 +48,3 @@ #define RGBLIGHT_EFFECT_RGB_TEST #define RGBLIGHT_EFFECT_ALTERNATING #define RGBLIGHT_EFFECT_TWINKLE -#define RGBLIGHT_HUE_STEP 8 -#define RGBLIGHT_SAT_STEP 8 -#define RGBLIGHT_VAL_STEP 8 diff --git a/keyboards/neson_design/n6/info.json b/keyboards/neson_design/n6/info.json index 770748fa29..b6dd5eba41 100644 --- a/keyboards/neson_design/n6/info.json +++ b/keyboards/neson_design/n6/info.json @@ -20,6 +20,9 @@ "pin": "B3" }, "rgblight": { + "saturation_steps": 8, + "brightness_steps": 8, + "led_count": 65, "max_brightness": 192 }, "processor": "atmega32u4", diff --git a/keyboards/newgame40/config.h b/keyboards/newgame40/config.h index 18c605eb62..e599136062 100644 --- a/keyboards/newgame40/config.h +++ b/keyboards/newgame40/config.h @@ -28,27 +28,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #define RGBLIGHT_EFFECT_RGB_TEST #define RGBLIGHT_EFFECT_ALTERNATING #define RGBLIGHT_EFFECT_TWINKLE -#define RGBLED_NUM 25 // Number of LEDs -#define RGBLIGHT_HUE_STEP 10 -#define RGBLIGHT_SAT_STEP 17 - -#ifndef IOS_DEVICE_ENABLE - #if RGBLED_NUM <= 6 - #define RGBLIGHT_LIMIT_VAL 255 - #else - #define RGBLIGHT_LIMIT_VAL 130 - #endif - #define RGBLIGHT_VAL_STEP 17 -#else - #if RGBLED_NUM <= 6 - #define RGBLIGHT_LIMIT_VAL 90 - #else - #define RGBLIGHT_LIMIT_VAL 45 - #endif - #define RGBLIGHT_VAL_STEP 4 -#endif -#define RGBLIGHT_HUE_STEP 10 -#define RGBLIGHT_SAT_STEP 17 #if defined(RGBLIGHT_ENABLE) && !defined(IOS_DEVICE_ENABLE) #define USB_MAX_POWER_CONSUMPTION 400 @@ -57,5 +36,3 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. // iOS device need lessthan 100 #define USB_MAX_POWER_CONSUMPTION 100 #endif - -#define TAPPING_TERM 200 diff --git a/keyboards/newgame40/info.json b/keyboards/newgame40/info.json index 2cbb4c117d..fd33fd1822 100644 --- a/keyboards/newgame40/info.json +++ b/keyboards/newgame40/info.json @@ -13,6 +13,10 @@ "rows": ["F7", "B1", "B3", "B2"] }, "diode_direction": "COL2ROW", + "rgblight": { + "hue_steps": 10, + "led_count": 25 + }, "ws2812": { "pin": "F6" }, diff --git a/keyboards/newgame40/post_config.h b/keyboards/newgame40/post_config.h new file mode 100644 index 0000000000..247178beec --- /dev/null +++ b/keyboards/newgame40/post_config.h @@ -0,0 +1,17 @@ +#pragma once + +#ifndef IOS_DEVICE_ENABLE +# if RGBLED_NUM <= 6 +# define RGBLIGHT_LIMIT_VAL 255 +# else +# define RGBLIGHT_LIMIT_VAL 130 +# endif +# define RGBLIGHT_VAL_STEP 17 +#else +# if RGBLED_NUM <= 6 +# define RGBLIGHT_LIMIT_VAL 90 +# else +# define RGBLIGHT_LIMIT_VAL 45 +# endif +# define RGBLIGHT_VAL_STEP 4 +#endif diff --git a/keyboards/nibiria/stream15/rules.mk b/keyboards/nibiria/stream15/rules.mk index 9e42693cb6..c3b8e77d77 100644 --- a/keyboards/nibiria/stream15/rules.mk +++ b/keyboards/nibiria/stream15/rules.mk @@ -11,5 +11,3 @@ BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow AUDIO_ENABLE = no # Audio output -# Enter lower-power sleep mode when on the ChibiOS idle thread -OPT_DEFS += -DCORTEX_ENABLE_WFI_IDLE=TRUE diff --git a/keyboards/nightly_boards/adellein/adellein.c b/keyboards/nightly_boards/adellein/adellein.c deleted file mode 100644 index 8ae826d49e..0000000000 --- a/keyboards/nightly_boards/adellein/adellein.c +++ /dev/null @@ -1,28 +0,0 @@ -/* Copyright 2020 Neil Brian Ramirez - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see <http://www.gnu.org/licenses/>. - */ - -#include "adellein.h" - -void matrix_scan_kb(void) { - encoder_action_unregister(); - matrix_scan_user(); -} - -bool encoder_update_kb(uint8_t index, bool clockwise) { -// if (!encoder_update_user(index, clockwise)) return false; - encoder_action_register(index, clockwise); - return true; -}; diff --git a/keyboards/nightly_boards/adellein/adellein.h b/keyboards/nightly_boards/adellein/adellein.h deleted file mode 100644 index 33cf8e0b68..0000000000 --- a/keyboards/nightly_boards/adellein/adellein.h +++ /dev/null @@ -1,20 +0,0 @@ -/* Copyright 2020 Neil Brian Ramirez - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see <http://www.gnu.org/licenses/>. - */ - -#pragma once - -#include "quantum.h" -#include "encoder_action.h" diff --git a/keyboards/nightly_boards/adellein/config.h b/keyboards/nightly_boards/adellein/config.h index d1703c1c80..6bcd3aafa3 100644 --- a/keyboards/nightly_boards/adellein/config.h +++ b/keyboards/nightly_boards/adellein/config.h @@ -17,7 +17,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #pragma once -#define RGBLED_NUM 14 #define RGBLIGHT_EFFECT_BREATHING #define RGBLIGHT_EFFECT_RAINBOW_MOOD #define RGBLIGHT_EFFECT_RAINBOW_SWIRL @@ -29,10 +28,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #define RGBLIGHT_EFFECT_ALTERNATING #define RGBLIGHT_EFFECT_TWINKLE -/* Encoders */ -#define ENCODERS_CW_KEY { { 3, 3 } } -#define ENCODERS_CCW_KEY { { 1, 3 } } - /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ #define LOCKING_SUPPORT_ENABLE /* Locking resynchronize hack */ diff --git a/keyboards/nightly_boards/adellein/encoder_action.c b/keyboards/nightly_boards/adellein/encoder_action.c deleted file mode 100644 index 522fb58d5a..0000000000 --- a/keyboards/nightly_boards/adellein/encoder_action.c +++ /dev/null @@ -1,47 +0,0 @@ -/* Copyright 2020 Neil Brian Ramirez - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 3 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see <http://www.gnu.org/licenses/>. - */ - -#include "encoder_action.h" - -static uint8_t encoder_state[NUM_ENCODERS] = {0}; -static keypos_t encoder_cw[NUM_ENCODERS] = ENCODERS_CW_KEY; -static keypos_t encoder_ccw[NUM_ENCODERS] = ENCODERS_CCW_KEY; - -void encoder_action_unregister(void) { - for (int index = 0; index < NUM_ENCODERS; ++index) { - if (encoder_state[index]) { - keyevent_t encoder_event = (keyevent_t) { - .key = encoder_state[index] >> 1 ? encoder_cw[index] : encoder_ccw[index], - .pressed = false, - .time = timer_read(), - .type = KEY_EVENT - }; - encoder_state[index] = 0; - action_exec(encoder_event); - } - } -} - -void encoder_action_register(uint8_t index, bool clockwise) { - keyevent_t encoder_event = (keyevent_t) { - .key = clockwise ? encoder_cw[index] : encoder_ccw[index], - .pressed = true, - .time = timer_read(), - .type = KEY_EVENT - }; - encoder_state[index] = (clockwise ^ 1) | (clockwise << 1); - action_exec(encoder_event); -} diff --git a/keyboards/nightly_boards/adellein/encoder_action.h b/keyboards/nightly_boards/adellein/encoder_action.h deleted file mode 100644 index fb22632632..0000000000 --- a/keyboards/nightly_boards/adellein/encoder_action.h +++ /dev/null @@ -1,23 +0,0 @@ -/* Copyright 2020 Neil Brian Ramirez - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 3 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see <http://www.gnu.org/licenses/>. - */ - -#pragma once - -#include "quantum.h" - -void encoder_action_unregister(void); - -void encoder_action_register(uint8_t index, bool clockwise);
\ No newline at end of file diff --git a/keyboards/nightly_boards/adellein/info.json b/keyboards/nightly_boards/adellein/info.json index 81e21e9377..8d29f87163 100644 --- a/keyboards/nightly_boards/adellein/info.json +++ b/keyboards/nightly_boards/adellein/info.json @@ -18,6 +18,9 @@ {"pin_a": "C7", "pin_b": "C6"} ] }, + "rgblight": { + "led_count": 14 + }, "ws2812": { "pin": "D5" }, @@ -80,66 +83,6 @@ {"matrix": [3, 9], "x": 10.75, "y": 3, "w": 1.25}, {"matrix": [3, 12], "x": 14.75, "y": 3, "w": 1.25} ] - }, - "LAYOUT_40ergo_split_ent_encoder": { - "layout": [ - {"matrix": [0, 0], "x": 0.5, "y": 0}, - {"matrix": [0, 1], "x": 1.5, "y": 0}, - {"matrix": [0, 2], "x": 2.5, "y": 0}, - {"matrix": [0, 3], "x": 3.5, "y": 0}, - {"matrix": [0, 4], "x": 4.5, "y": 0}, - {"matrix": [0, 5], "x": 5.5, "y": 0}, - - {"matrix": [0, 6], "x": 8.25, "y": 0}, - {"matrix": [0, 7], "x": 9.25, "y": 0}, - {"matrix": [0, 8], "x": 10.25, "y": 0}, - {"matrix": [0, 9], "x": 11.25, "y": 0}, - {"matrix": [0, 10], "x": 12.25, "y": 0}, - {"matrix": [0, 11], "x": 13.25, "y": 0}, - {"matrix": [0, 12], "x": 14.25, "y": 0, "w": 1.5}, - - {"matrix": [1, 0], "x": 0.25, "y": 1, "w": 1.25}, - {"matrix": [1, 1], "x": 1.5, "y": 1}, - {"matrix": [1, 2], "x": 2.5, "y": 1}, - {"matrix": [1, 3], "x": 3.5, "y": 1}, - {"matrix": [1, 4], "x": 4.5, "y": 1}, - {"matrix": [1, 5], "x": 5.5, "y": 1}, - - {"matrix": [1, 6], "x": 8.75, "y": 1}, - {"matrix": [1, 7], "x": 9.75, "y": 1}, - {"matrix": [1, 8], "x": 10.75, "y": 1}, - {"matrix": [1, 9], "x": 11.75, "y": 1}, - {"matrix": [1, 10], "x": 12.75, "y": 1}, - {"matrix": [1, 11], "x": 13.75, "y": 1}, - {"matrix": [1, 12], "x": 14.75, "y": 1, "w": 1.25}, - - {"matrix": [2, 0], "x": 0, "y": 2, "w": 1.75}, - {"matrix": [2, 1], "x": 1.75, "y": 2}, - {"matrix": [2, 2], "x": 2.75, "y": 2}, - {"matrix": [2, 3], "x": 3.75, "y": 2}, - {"matrix": [2, 4], "x": 4.75, "y": 2}, - {"matrix": [2, 5], "x": 5.75, "y": 2}, - - {"matrix": [2, 6], "x": 8.5, "y": 2}, - {"matrix": [2, 7], "x": 9.5, "y": 2}, - {"matrix": [2, 8], "x": 10.5, "y": 2}, - {"matrix": [2, 9], "x": 11.5, "y": 2}, - {"matrix": [2, 10], "x": 12.5, "y": 2}, - {"matrix": [2, 11], "x": 13.5, "y": 2}, - {"matrix": [2, 12], "x": 14.5, "y": 2, "w": 1.75}, - - {"matrix": [3, 0], "x": 0.25, "y": 3, "w": 1.25}, - {"matrix": [3, 2], "x": 2.75, "y": 3, "w": 1.25}, - {"matrix": [3, 4], "x": 4, "y": 3, "w": 2.25}, - {"matrix": [3, 5], "x": 6.25, "y": 3}, - - {"matrix": [3, 7], "x": 8, "y": 3, "w": 2.75}, - {"matrix": [3, 9], "x": 10.75, "y": 3, "w": 1.25}, - {"matrix": [3, 12], "x": 14.75, "y": 3, "w": 1.25}, - - {"matrix": [3, 1], "x": 5.75, "y": 4}, - {"matrix": [3, 3], "x": 6.75, "y": 4} - ] } } } diff --git a/keyboards/nightly_boards/adellein/keymaps/via/keymap.c b/keyboards/nightly_boards/adellein/keymaps/via/keymap.c index c4c0adffe3..acfac215a4 100644 --- a/keyboards/nightly_boards/adellein/keymaps/via/keymap.c +++ b/keyboards/nightly_boards/adellein/keymaps/via/keymap.c @@ -15,35 +15,39 @@ */ #include QMK_KEYBOARD_H - const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { - [0] = LAYOUT_40ergo_split_ent_encoder( + [0] = LAYOUT_40ergo_split_ent( KC_ESC, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_BSPC, KC_TAB, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, - KC_LCTL, KC_LALT, KC_SPC, KC_SPC, KC_SPC, KC_RALT, KC_RCTL, - KC_VOLD, KC_VOLU + KC_LCTL, KC_LALT, KC_SPC, KC_SPC, KC_SPC, KC_RALT, KC_RCTL ), - [1] = LAYOUT_40ergo_split_ent_encoder( + [1] = LAYOUT_40ergo_split_ent( KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, - KC_TRNS, KC_TRNS + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS ), - [2] = LAYOUT_40ergo_split_ent_encoder( + [2] = LAYOUT_40ergo_split_ent( KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, - KC_TRNS, KC_TRNS + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS ), - [3] = LAYOUT_40ergo_split_ent_encoder( + [3] = LAYOUT_40ergo_split_ent( KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, - KC_TRNS, KC_TRNS + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS ), }; + +#ifdef ENCODER_MAP_ENABLE +const uint16_t PROGMEM encoder_map[][NUM_ENCODERS][NUM_DIRECTIONS] = { + [0] = { ENCODER_CCW_CW(KC_VOLD, KC_VOLU) }, + [1] = { ENCODER_CCW_CW(_______, _______) }, + [2] = { ENCODER_CCW_CW(_______, _______) }, + [3] = { ENCODER_CCW_CW(_______, _______) }, +}; +#endif diff --git a/keyboards/nightly_boards/adellein/keymaps/via/rules.mk b/keyboards/nightly_boards/adellein/keymaps/via/rules.mk index 43061db1dd..1189f4ad19 100644 --- a/keyboards/nightly_boards/adellein/keymaps/via/rules.mk +++ b/keyboards/nightly_boards/adellein/keymaps/via/rules.mk @@ -1,2 +1,3 @@ VIA_ENABLE = yes -LTO_ENABLE = yes
\ No newline at end of file +LTO_ENABLE = yes +ENCODER_MAP_ENABLE = yes diff --git a/keyboards/nightly_boards/adellein/rules.mk b/keyboards/nightly_boards/adellein/rules.mk index 8daf6a353a..aa619121b9 100644 --- a/keyboards/nightly_boards/adellein/rules.mk +++ b/keyboards/nightly_boards/adellein/rules.mk @@ -11,6 +11,3 @@ BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality RGBLIGHT_ENABLE = yes # Enable keyboard RGB underglow ENCODER_ENABLE = yes # Enable Rotary Encoders LTO_ENABLE = yes - -# Added encoder Action -SRC += encoder_action.c
\ No newline at end of file diff --git a/keyboards/nightly_boards/alter/rev1/config.h b/keyboards/nightly_boards/alter/rev1/config.h index 6588633890..03c7b48e8e 100644 --- a/keyboards/nightly_boards/alter/rev1/config.h +++ b/keyboards/nightly_boards/alter/rev1/config.h @@ -14,11 +14,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #pragma once -#define RGBLED_NUM 18 -#define RGBLIGHT_HUE_STEP 8 -#define RGBLIGHT_SAT_STEP 8 -#define RGBLIGHT_VAL_STEP 8 -#define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */ #define RGBLIGHT_EFFECT_BREATHING #define RGBLIGHT_EFFECT_RAINBOW_MOOD #define RGBLIGHT_EFFECT_RAINBOW_SWIRL diff --git a/keyboards/nightly_boards/alter/rev1/info.json b/keyboards/nightly_boards/alter/rev1/info.json index e0ea3294e9..3fcbc36a0b 100644 --- a/keyboards/nightly_boards/alter/rev1/info.json +++ b/keyboards/nightly_boards/alter/rev1/info.json @@ -18,6 +18,12 @@ "num_lock": "D7", "scroll_lock": "B4" }, + "rgblight": { + "saturation_steps": 8, + "brightness_steps": 8, + "led_count": 18, + "sleep": true + }, "ws2812": { "pin": "F1" }, diff --git a/keyboards/nightly_boards/conde60/config.h b/keyboards/nightly_boards/conde60/config.h index 541d2e289e..3204c5492b 100644 --- a/keyboards/nightly_boards/conde60/config.h +++ b/keyboards/nightly_boards/conde60/config.h @@ -17,7 +17,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #pragma once -#define RGBLED_NUM 12 #define RGBLIGHT_EFFECT_BREATHING #define RGBLIGHT_EFFECT_RAINBOW_MOOD #define RGBLIGHT_EFFECT_RAINBOW_SWIRL diff --git a/keyboards/nightly_boards/conde60/info.json b/keyboards/nightly_boards/conde60/info.json index e318151c8c..3c6369c243 100644 --- a/keyboards/nightly_boards/conde60/info.json +++ b/keyboards/nightly_boards/conde60/info.json @@ -13,6 +13,9 @@ "rows": ["B1", "B2", "F0", "F1", "F4"] }, "diode_direction": "COL2ROW", + "rgblight": { + "led_count": 12 + }, "ws2812": { "pin": "D5" }, diff --git a/keyboards/nightly_boards/n2/config.h b/keyboards/nightly_boards/n2/config.h index 0fec21c752..03c7b48e8e 100644 --- a/keyboards/nightly_boards/n2/config.h +++ b/keyboards/nightly_boards/n2/config.h @@ -14,11 +14,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #pragma once -#define RGBLED_NUM 2 -#define RGBLIGHT_HUE_STEP 8 -#define RGBLIGHT_SAT_STEP 8 -#define RGBLIGHT_VAL_STEP 8 -#define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */ #define RGBLIGHT_EFFECT_BREATHING #define RGBLIGHT_EFFECT_RAINBOW_MOOD #define RGBLIGHT_EFFECT_RAINBOW_SWIRL diff --git a/keyboards/nightly_boards/n2/info.json b/keyboards/nightly_boards/n2/info.json index f925eba577..ed30ba981f 100644 --- a/keyboards/nightly_boards/n2/info.json +++ b/keyboards/nightly_boards/n2/info.json @@ -13,6 +13,12 @@ "rows": ["F1", "C7"] }, "diode_direction": "COL2ROW", + "rgblight": { + "saturation_steps": 8, + "brightness_steps": 8, + "led_count": 2, + "sleep": true + }, "ws2812": { "pin": "D4" }, diff --git a/keyboards/nightly_boards/n40_o/config.h b/keyboards/nightly_boards/n40_o/config.h index 474742b6af..27a82c8acd 100644 --- a/keyboards/nightly_boards/n40_o/config.h +++ b/keyboards/nightly_boards/n40_o/config.h @@ -17,26 +17,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #pragma once -#define RGBLED_NUM 12 -#define RGBLIGHT_EFFECT_BREATHING -#define RGBLIGHT_EFFECT_RAINBOW_MOOD -#define RGBLIGHT_EFFECT_RAINBOW_SWIRL -#define RGBLIGHT_EFFECT_SNAKE -#define RGBLIGHT_EFFECT_KNIGHT -#define RGBLIGHT_EFFECT_CHRISTMAS -#define RGBLIGHT_EFFECT_STATIC_GRADIENT -#define RGBLIGHT_EFFECT_RGB_TEST -#define RGBLIGHT_EFFECT_ALTERNATING -#define RGBLIGHT_EFFECT_TWINKLE - -/* Encoders */ -#define ENCODERS_CW_KEY { { 2, 4 },{ 4, 4 },{ 6, 4 } } -#define ENCODERS_CCW_KEY { { 1, 4 },{ 3, 4 },{ 5, 4 } } - -/* Audio */ - -#define AUDIO_PIN B7 - #define AUDIO_CLICKY /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ diff --git a/keyboards/nightly_boards/n40_o/encoder_action.c b/keyboards/nightly_boards/n40_o/encoder_action.c deleted file mode 100644 index 522fb58d5a..0000000000 --- a/keyboards/nightly_boards/n40_o/encoder_action.c +++ /dev/null @@ -1,47 +0,0 @@ -/* Copyright 2020 Neil Brian Ramirez - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 3 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see <http://www.gnu.org/licenses/>. - */ - -#include "encoder_action.h" - -static uint8_t encoder_state[NUM_ENCODERS] = {0}; -static keypos_t encoder_cw[NUM_ENCODERS] = ENCODERS_CW_KEY; -static keypos_t encoder_ccw[NUM_ENCODERS] = ENCODERS_CCW_KEY; - -void encoder_action_unregister(void) { - for (int index = 0; index < NUM_ENCODERS; ++index) { - if (encoder_state[index]) { - keyevent_t encoder_event = (keyevent_t) { - .key = encoder_state[index] >> 1 ? encoder_cw[index] : encoder_ccw[index], - .pressed = false, - .time = timer_read(), - .type = KEY_EVENT - }; - encoder_state[index] = 0; - action_exec(encoder_event); - } - } -} - -void encoder_action_register(uint8_t index, bool clockwise) { - keyevent_t encoder_event = (keyevent_t) { - .key = clockwise ? encoder_cw[index] : encoder_ccw[index], - .pressed = true, - .time = timer_read(), - .type = KEY_EVENT - }; - encoder_state[index] = (clockwise ^ 1) | (clockwise << 1); - action_exec(encoder_event); -} diff --git a/keyboards/nightly_boards/n40_o/encoder_action.h b/keyboards/nightly_boards/n40_o/encoder_action.h deleted file mode 100644 index fb22632632..0000000000 --- a/keyboards/nightly_boards/n40_o/encoder_action.h +++ /dev/null @@ -1,23 +0,0 @@ -/* Copyright 2020 Neil Brian Ramirez - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 3 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see <http://www.gnu.org/licenses/>. - */ - -#pragma once - -#include "quantum.h" - -void encoder_action_unregister(void); - -void encoder_action_register(uint8_t index, bool clockwise);
\ No newline at end of file diff --git a/keyboards/nightly_boards/n40_o/info.json b/keyboards/nightly_boards/n40_o/info.json index ec403fb647..1f341441a4 100644 --- a/keyboards/nightly_boards/n40_o/info.json +++ b/keyboards/nightly_boards/n40_o/info.json @@ -3,6 +3,16 @@ "manufacturer": "Neil Brian Ramirez", "url": "", "maintainer": "Neil Brian Ramirez", + "features": { + "bootmagic": true, + "mousekey": true, + "extrakey": true, + "rgblight": true, + "encoder": true + }, + "build": { + "lto": true + }, "usb": { "vid": "0xD812", "pid": "0x0009", @@ -10,7 +20,7 @@ }, "matrix_pins": { "cols": ["B5", "C7", "D6", "D4", "B3", "B2", "B1", "B0", "D5", "D3", "D2", "D1", "D0"], - "rows": ["E6", "F0", "F1", "D7", null] + "rows": ["E6", "F0", "F1", "D7"] }, "diode_direction": "COL2ROW", "encoder": { @@ -20,77 +30,30 @@ {"pin_a": "B6", "pin_b": "C6"} ] }, + "rgblight": { + "led_count": 12, + "animations": { + "alternating": true, + "breathing": true, + "christmas": true, + "knight": true, + "rainbow_mood": true, + "rainbow_swirl": true, + "rgb_test": true, + "snake": true, + "static_gradient": true, + "twinkle": true + } + }, "ws2812": { "pin": "B4" }, + "audio": { + "pins": ["B7"] + }, "processor": "atmega32u4", "bootloader": "atmel-dfu", "layouts": { - "LAYOUT_ortho_4x13_encoders": { - "layout": [ - {"matrix": [4, 1], "x": 0, "y": 0}, - {"matrix": [4, 2], "x": 1, "y": 0}, - {"matrix": [0, 0], "x": 2.25, "y": 0}, - {"matrix": [0, 1], "x": 3.5, "y": 0}, - {"matrix": [0, 2], "x": 4.5, "y": 0}, - {"matrix": [0, 3], "x": 5.5, "y": 0}, - {"matrix": [0, 4], "x": 6.5, "y": 0}, - {"matrix": [0, 5], "x": 7.5, "y": 0}, - {"matrix": [0, 6], "x": 8.5, "y": 0}, - {"matrix": [0, 7], "x": 9.5, "y": 0}, - {"matrix": [0, 8], "x": 10.5, "y": 0}, - {"matrix": [0, 9], "x": 11.5, "y": 0}, - {"matrix": [0, 10], "x": 12.5, "y": 0}, - {"matrix": [0, 11], "x": 13.5, "y": 0}, - {"matrix": [0, 12], "x": 14.5, "y": 0}, - - {"matrix": [4, 3], "x": 0, "y": 1}, - {"matrix": [4, 4], "x": 1, "y": 1}, - {"matrix": [1, 0], "x": 2.25, "y": 1}, - {"matrix": [1, 1], "x": 3.5, "y": 1}, - {"matrix": [1, 2], "x": 4.5, "y": 1}, - {"matrix": [1, 3], "x": 5.5, "y": 1}, - {"matrix": [1, 4], "x": 6.5, "y": 1}, - {"matrix": [1, 5], "x": 7.5, "y": 1}, - {"matrix": [1, 6], "x": 8.5, "y": 1}, - {"matrix": [1, 7], "x": 9.5, "y": 1}, - {"matrix": [1, 8], "x": 10.5, "y": 1}, - {"matrix": [1, 9], "x": 11.5, "y": 1}, - {"matrix": [1, 10], "x": 12.5, "y": 1}, - {"matrix": [1, 11], "x": 13.5, "y": 1}, - {"matrix": [1, 12], "x": 14.5, "y": 1}, - - {"matrix": [4, 5], "x": 0, "y": 2}, - {"matrix": [4, 6], "x": 1, "y": 2}, - {"matrix": [2, 0], "x": 2.25, "y": 2}, - {"matrix": [2, 1], "x": 3.5, "y": 2}, - {"matrix": [2, 2], "x": 4.5, "y": 2}, - {"matrix": [2, 3], "x": 5.5, "y": 2}, - {"matrix": [2, 4], "x": 6.5, "y": 2}, - {"matrix": [2, 5], "x": 7.5, "y": 2}, - {"matrix": [2, 6], "x": 8.5, "y": 2}, - {"matrix": [2, 7], "x": 9.5, "y": 2}, - {"matrix": [2, 8], "x": 10.5, "y": 2}, - {"matrix": [2, 9], "x": 11.5, "y": 2}, - {"matrix": [2, 10], "x": 12.5, "y": 2}, - {"matrix": [2, 11], "x": 13.5, "y": 2}, - {"matrix": [2, 12], "x": 14.5, "y": 2}, - - {"matrix": [3, 0], "x": 2.25, "y": 3}, - {"matrix": [3, 1], "x": 3.5, "y": 3}, - {"matrix": [3, 2], "x": 4.5, "y": 3}, - {"matrix": [3, 3], "x": 5.5, "y": 3}, - {"matrix": [3, 4], "x": 6.5, "y": 3}, - {"matrix": [3, 5], "x": 7.5, "y": 3}, - {"matrix": [3, 6], "x": 8.5, "y": 3}, - {"matrix": [3, 7], "x": 9.5, "y": 3}, - {"matrix": [3, 8], "x": 10.5, "y": 3}, - {"matrix": [3, 9], "x": 11.5, "y": 3}, - {"matrix": [3, 10], "x": 12.5, "y": 3}, - {"matrix": [3, 11], "x": 13.5, "y": 3}, - {"matrix": [3, 12], "x": 14.5, "y": 3} - ] - }, "LAYOUT_ortho_4x13": { "layout": [ {"matrix": [0, 0], "x": 0, "y": 0}, diff --git a/keyboards/nightly_boards/n40_o/keymaps/default/keymap.c b/keyboards/nightly_boards/n40_o/keymaps/default/keymap.c index 658b43689a..bd57f61055 100644 --- a/keyboards/nightly_boards/n40_o/keymaps/default/keymap.c +++ b/keyboards/nightly_boards/n40_o/keymaps/default/keymap.c @@ -15,12 +15,11 @@ */ #include QMK_KEYBOARD_H - const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { [0] = LAYOUT_ortho_4x13( KC_SPC, KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_BSPC, KC_SPC, KC_ESC, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_SPC, KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_ENT, - KC_SPC, KC_SPC, KC_LCTL, KC_LALT, KC_LGUI, MO(1), KC_SPC, KC_SPC, MO(2), KC_LEFT, KC_DOWN, KC_UP, KC_RGHT - ), + KC_SPC, KC_SPC, KC_LCTL, KC_LALT, KC_LGUI, KC_SPC, KC_SPC, KC_SPC, KC_SPC, KC_LEFT, KC_DOWN, KC_UP, KC_RGHT + ) }; diff --git a/keyboards/nightly_boards/n40_o/keymaps/ortho_4x13_1x2u_c/keymap.c b/keyboards/nightly_boards/n40_o/keymaps/ortho_4x13_1x2u_c/keymap.c index 55f22cdc49..cda2bb6050 100644 --- a/keyboards/nightly_boards/n40_o/keymaps/ortho_4x13_1x2u_c/keymap.c +++ b/keyboards/nightly_boards/n40_o/keymaps/ortho_4x13_1x2u_c/keymap.c @@ -15,12 +15,11 @@ */ #include QMK_KEYBOARD_H - const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { [0] = LAYOUT_ortho_4x13_1x2u_c( KC_SPC, KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_BSPC, KC_SPC, KC_ESC, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_SPC, KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_ENT, - KC_SPC, KC_SPC, KC_LCTL, KC_LALT, KC_LGUI, MO(1), KC_SPC, MO(2), KC_LEFT, KC_DOWN, KC_UP, KC_RGHT - ), + KC_SPC, KC_SPC, KC_LCTL, KC_LALT, KC_LGUI, KC_SPC, KC_SPC, KC_SPC, KC_LEFT, KC_DOWN, KC_UP, KC_RGHT + ) }; diff --git a/keyboards/nightly_boards/n40_o/keymaps/ortho_4x13_encoders/keymap.c b/keyboards/nightly_boards/n40_o/keymaps/ortho_4x13_encoders/keymap.c deleted file mode 100644 index f6e0dc23ee..0000000000 --- a/keyboards/nightly_boards/n40_o/keymaps/ortho_4x13_encoders/keymap.c +++ /dev/null @@ -1,26 +0,0 @@ -/* Copyright 2020 Neil Brian Ramirez - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see <http://www.gnu.org/licenses/>. - */ -#include QMK_KEYBOARD_H - - -const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { - [0] = LAYOUT_ortho_4x13_encoders( - KC_SPC, KC_SPC, KC_SPC, KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_BSPC, - KC_SPC, KC_SPC, KC_SPC, KC_ESC, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, - KC_SPC, KC_SPC, KC_SPC, KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_ENT, - KC_SPC, KC_SPC, KC_LCTL, KC_LALT, KC_LGUI, MO(1), KC_SPC, KC_SPC, MO(2), KC_LEFT, KC_DOWN, KC_UP, KC_RGHT - ), -}; diff --git a/keyboards/nightly_boards/n40_o/keymaps/via/config.h b/keyboards/nightly_boards/n40_o/keymaps/via/config.h deleted file mode 100644 index 1208e2769f..0000000000 --- a/keyboards/nightly_boards/n40_o/keymaps/via/config.h +++ /dev/null @@ -1 +0,0 @@ -#define LAYER_STATE_8BIT
\ No newline at end of file diff --git a/keyboards/nightly_boards/n40_o/keymaps/via/keymap.c b/keyboards/nightly_boards/n40_o/keymaps/via/keymap.c index 830d8d8782..e9ddb71401 100644 --- a/keyboards/nightly_boards/n40_o/keymaps/via/keymap.c +++ b/keyboards/nightly_boards/n40_o/keymaps/via/keymap.c @@ -15,34 +15,24 @@ */ #include QMK_KEYBOARD_H - const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { - [0] = LAYOUT_ortho_4x13_encoders( - KC_SPC, KC_SPC, KC_SPC, KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_BSPC, - KC_SPC, KC_SPC, KC_SPC, KC_ESC, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, - KC_SPC, KC_SPC, KC_SPC, KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_ENT, - KC_SPC, KC_SPC, KC_LCTL, KC_LALT, KC_LGUI, MO(1), KC_SPC, KC_SPC, MO(2), KC_LEFT, KC_DOWN, KC_UP, KC_RGHT - - ), - [1] = LAYOUT_ortho_4x13_encoders( - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS - - ), - [2] = LAYOUT_ortho_4x13_encoders( - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS - - ), - [3] = LAYOUT_ortho_4x13_encoders( - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS - - ), + [0] = LAYOUT_ortho_4x13( + KC_SPC, KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_BSPC, + KC_SPC, KC_ESC, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, + KC_SPC, KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_ENT, + KC_SPC, KC_SPC, KC_LCTL, KC_LALT, KC_LGUI, MO(1), KC_SPC, KC_SPC, MO(2), KC_LEFT, KC_DOWN, KC_UP, KC_RGHT + ), + [1] = LAYOUT_ortho_4x13( + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS + ) +}; + +#ifdef ENCODER_MAP_ENABLE +const uint16_t PROGMEM encoder_map[][NUM_ENCODERS][NUM_DIRECTIONS] = { + [0] = { ENCODER_CCW_CW(KC_PGUP, KC_PGDN), ENCODER_CCW_CW(KC_VOLD, KC_VOLU), ENCODER_CCW_CW(KC_MPRV, KC_MNXT) }, + [1] = { ENCODER_CCW_CW(RGB_HUD, RGB_HUI), ENCODER_CCW_CW(RGB_SAD, RGB_SAI), ENCODER_CCW_CW(RGB_VAD, RGB_VAI) } }; +#endif diff --git a/keyboards/nightly_boards/n40_o/keymaps/via/rules.mk b/keyboards/nightly_boards/n40_o/keymaps/via/rules.mk index 43061db1dd..f1adcab005 100644 --- a/keyboards/nightly_boards/n40_o/keymaps/via/rules.mk +++ b/keyboards/nightly_boards/n40_o/keymaps/via/rules.mk @@ -1,2 +1,2 @@ VIA_ENABLE = yes -LTO_ENABLE = yes
\ No newline at end of file +ENCODER_MAP_ENABLE = yes diff --git a/keyboards/nightly_boards/n40_o/n40_o.c b/keyboards/nightly_boards/n40_o/n40_o.c deleted file mode 100644 index 643803f903..0000000000 --- a/keyboards/nightly_boards/n40_o/n40_o.c +++ /dev/null @@ -1,29 +0,0 @@ -/* Copyright 2020 Neil Brian Ramirez - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see <http://www.gnu.org/licenses/>. - */ - -#include "quantum.h" -#include "encoder_action.h" - -void matrix_scan_kb(void) { - encoder_action_unregister(); - matrix_scan_user(); -} - -bool encoder_update_kb(uint8_t index, bool clockwise) { -// if (!encoder_update_user(index, clockwise)) return false; - encoder_action_register(index, clockwise); - return true; -}; diff --git a/keyboards/nightly_boards/n40_o/rules.mk b/keyboards/nightly_boards/n40_o/rules.mk index f1189a87d2..6e7633bfe0 100644 --- a/keyboards/nightly_boards/n40_o/rules.mk +++ b/keyboards/nightly_boards/n40_o/rules.mk @@ -1,17 +1 @@ -# Build Options -# change yes to no to disable -# -BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite -MOUSEKEY_ENABLE = yes # Mouse keys -EXTRAKEY_ENABLE = yes # Audio control and System control -CONSOLE_ENABLE = no # Console for debug -COMMAND_ENABLE = no # Commands for debug and configuration -NKRO_ENABLE = no # Enable N-Key Rollover -BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality -RGBLIGHT_ENABLE = yes # Enable keyboard RGB underglow -AUDIO_ENABLE = yes # Audio output -ENCODER_ENABLE = yes # Enable Rotary Encoders -LTO_ENABLE = yes - -# Added encoder Action -SRC += encoder_action.c
\ No newline at end of file +# This file intentionally left blank diff --git a/keyboards/nightly_boards/n60_s/config.h b/keyboards/nightly_boards/n60_s/config.h index 75f803f548..26f02e471f 100644 --- a/keyboards/nightly_boards/n60_s/config.h +++ b/keyboards/nightly_boards/n60_s/config.h @@ -17,10 +17,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #pragma once -/* Encoders */ -#define ENCODERS_CW_KEY { { 1, 5 } } -#define ENCODERS_CCW_KEY { { 0, 5 } } - /* Audio */ #define B7_AUDIO @@ -28,12 +24,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. /* Underglow */ -#define RGBLED_NUM 12 -#define RGBLIGHT_HUE_STEP 8 -#define RGBLIGHT_SAT_STEP 8 -#define RGBLIGHT_VAL_STEP 8 -#define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */ - #define RGBLIGHT_EFFECT_BREATHING #define RGBLIGHT_EFFECT_RAINBOW_MOOD #define RGBLIGHT_EFFECT_RAINBOW_SWIRL diff --git a/keyboards/nightly_boards/n60_s/encoder_action.c b/keyboards/nightly_boards/n60_s/encoder_action.c deleted file mode 100644 index 522fb58d5a..0000000000 --- a/keyboards/nightly_boards/n60_s/encoder_action.c +++ /dev/null @@ -1,47 +0,0 @@ -/* Copyright 2020 Neil Brian Ramirez - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 3 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see <http://www.gnu.org/licenses/>. - */ - -#include "encoder_action.h" - -static uint8_t encoder_state[NUM_ENCODERS] = {0}; -static keypos_t encoder_cw[NUM_ENCODERS] = ENCODERS_CW_KEY; -static keypos_t encoder_ccw[NUM_ENCODERS] = ENCODERS_CCW_KEY; - -void encoder_action_unregister(void) { - for (int index = 0; index < NUM_ENCODERS; ++index) { - if (encoder_state[index]) { - keyevent_t encoder_event = (keyevent_t) { - .key = encoder_state[index] >> 1 ? encoder_cw[index] : encoder_ccw[index], - .pressed = false, - .time = timer_read(), - .type = KEY_EVENT - }; - encoder_state[index] = 0; - action_exec(encoder_event); - } - } -} - -void encoder_action_register(uint8_t index, bool clockwise) { - keyevent_t encoder_event = (keyevent_t) { - .key = clockwise ? encoder_cw[index] : encoder_ccw[index], - .pressed = true, - .time = timer_read(), - .type = KEY_EVENT - }; - encoder_state[index] = (clockwise ^ 1) | (clockwise << 1); - action_exec(encoder_event); -} diff --git a/keyboards/nightly_boards/n60_s/encoder_action.h b/keyboards/nightly_boards/n60_s/encoder_action.h deleted file mode 100644 index fb22632632..0000000000 --- a/keyboards/nightly_boards/n60_s/encoder_action.h +++ /dev/null @@ -1,23 +0,0 @@ -/* Copyright 2020 Neil Brian Ramirez - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 3 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see <http://www.gnu.org/licenses/>. - */ - -#pragma once - -#include "quantum.h" - -void encoder_action_unregister(void); - -void encoder_action_register(uint8_t index, bool clockwise);
\ No newline at end of file diff --git a/keyboards/nightly_boards/n60_s/info.json b/keyboards/nightly_boards/n60_s/info.json index 2e49134300..c17db5701b 100644 --- a/keyboards/nightly_boards/n60_s/info.json +++ b/keyboards/nightly_boards/n60_s/info.json @@ -10,7 +10,7 @@ }, "matrix_pins": { "cols": ["F7", "F6", "F5", "F4", "F1", "F0", "B0", "B1", "B2", "B3", "B5", "B6", "C6", "C7"], - "rows": ["B4", "D7", "D6", "D0", "E6", null] + "rows": ["B4", "D7", "D6", "D0", "E6"] }, "diode_direction": "COL2ROW", "encoder": { @@ -18,6 +18,12 @@ {"pin_a": "D3", "pin_b": "D5"} ] }, + "rgblight": { + "saturation_steps": 8, + "brightness_steps": 8, + "led_count": 12, + "sleep": true + }, "ws2812": { "pin": "D1" }, @@ -95,80 +101,6 @@ {"matrix": [4, 13], "x": 13.75, "y": 4, "w": 1.25} ] }, - "LAYOUT_60_ansi_split_bs_rshift_encoder": { - "layout": [ - {"matrix": [0, 0], "x": 0, "y": 0}, - {"matrix": [0, 1], "x": 1, "y": 0}, - {"matrix": [0, 2], "x": 2, "y": 0}, - {"matrix": [0, 3], "x": 3, "y": 0}, - {"matrix": [0, 4], "x": 4, "y": 0}, - {"matrix": [0, 5], "x": 5, "y": 0}, - {"matrix": [0, 6], "x": 6, "y": 0}, - {"matrix": [0, 7], "x": 7, "y": 0}, - {"matrix": [0, 8], "x": 8, "y": 0}, - {"matrix": [0, 9], "x": 9, "y": 0}, - {"matrix": [0, 10], "x": 10, "y": 0}, - {"matrix": [0, 11], "x": 11, "y": 0}, - {"matrix": [0, 12], "x": 12, "y": 0}, - {"matrix": [0, 13], "x": 13, "y": 0}, - {"matrix": [1, 13], "x": 14, "y": 0}, - - {"matrix": [1, 0], "x": 0, "y": 1, "w": 1.5}, - {"matrix": [1, 1], "x": 1.5, "y": 1}, - {"matrix": [1, 2], "x": 2.5, "y": 1}, - {"matrix": [1, 3], "x": 3.5, "y": 1}, - {"matrix": [1, 4], "x": 4.5, "y": 1}, - {"matrix": [1, 5], "x": 5.5, "y": 1}, - {"matrix": [1, 6], "x": 6.5, "y": 1}, - {"matrix": [1, 7], "x": 7.5, "y": 1}, - {"matrix": [1, 8], "x": 8.5, "y": 1}, - {"matrix": [1, 9], "x": 9.5, "y": 1}, - {"matrix": [1, 10], "x": 10.5, "y": 1}, - {"matrix": [1, 11], "x": 11.5, "y": 1}, - {"matrix": [1, 12], "x": 12.5, "y": 1}, - {"matrix": [2, 13], "x": 13.5, "y": 1, "w": 1.5}, - - {"matrix": [2, 0], "x": 0, "y": 2, "w": 1.75}, - {"matrix": [2, 1], "x": 1.75, "y": 2}, - {"matrix": [2, 2], "x": 2.75, "y": 2}, - {"matrix": [2, 3], "x": 3.75, "y": 2}, - {"matrix": [2, 4], "x": 4.75, "y": 2}, - {"matrix": [2, 5], "x": 5.75, "y": 2}, - {"matrix": [2, 6], "x": 6.75, "y": 2}, - {"matrix": [2, 7], "x": 7.75, "y": 2}, - {"matrix": [2, 8], "x": 8.75, "y": 2}, - {"matrix": [2, 9], "x": 9.75, "y": 2}, - {"matrix": [2, 10], "x": 10.75, "y": 2}, - {"matrix": [2, 11], "x": 11.75, "y": 2}, - {"matrix": [2, 12], "x": 12.75, "y": 2, "w": 2.25}, - - {"matrix": [3, 0], "x": 0, "y": 3, "w": 2.25}, - {"matrix": [3, 2], "x": 2.25, "y": 3}, - {"matrix": [3, 3], "x": 3.25, "y": 3}, - {"matrix": [3, 4], "x": 4.25, "y": 3}, - {"matrix": [3, 5], "x": 5.25, "y": 3}, - {"matrix": [3, 6], "x": 6.25, "y": 3}, - {"matrix": [3, 7], "x": 7.25, "y": 3}, - {"matrix": [3, 8], "x": 8.25, "y": 3}, - {"matrix": [3, 9], "x": 9.25, "y": 3}, - {"matrix": [3, 10], "x": 10.25, "y": 3}, - {"matrix": [3, 11], "x": 11.25, "y": 3}, - {"matrix": [3, 12], "x": 12.25, "y": 3, "w": 1.75}, - {"matrix": [3, 13], "x": 14, "y": 3}, - - {"matrix": [5, 0], "x": 15.25, "y": 3}, - {"matrix": [5, 1], "x": 16.25, "y": 3}, - - {"matrix": [4, 0], "x": 0, "y": 4, "w": 1.25}, - {"matrix": [4, 2], "x": 1.25, "y": 4, "w": 1.25}, - {"matrix": [4, 3], "x": 2.5, "y": 4, "w": 1.25}, - {"matrix": [4, 7], "x": 3.75, "y": 4, "w": 6.25}, - {"matrix": [4, 10], "x": 10, "y": 4, "w": 1.25}, - {"matrix": [4, 11], "x": 11.25, "y": 4, "w": 1.25}, - {"matrix": [4, 12], "x": 12.5, "y": 4, "w": 1.25}, - {"matrix": [4, 13], "x": 13.75, "y": 4, "w": 1.25} - ] - }, "LAYOUT_60_ansi_split_bs_rshift_tsangan": { "layout": [ {"matrix": [0, 0], "x": 0, "y": 0}, @@ -238,79 +170,6 @@ {"matrix": [4, 12], "x": 12.5, "y": 4}, {"matrix": [4, 13], "x": 13.5, "y": 4, "w": 1.5} ] - }, - "LAYOUT_60_ansi_split_bs_rshift_tsangan_encoder": { - "layout": [ - {"matrix": [0, 0], "x": 0, "y": 0}, - {"matrix": [0, 1], "x": 1, "y": 0}, - {"matrix": [0, 2], "x": 2, "y": 0}, - {"matrix": [0, 3], "x": 3, "y": 0}, - {"matrix": [0, 4], "x": 4, "y": 0}, - {"matrix": [0, 5], "x": 5, "y": 0}, - {"matrix": [0, 6], "x": 6, "y": 0}, - {"matrix": [0, 7], "x": 7, "y": 0}, - {"matrix": [0, 8], "x": 8, "y": 0}, - {"matrix": [0, 9], "x": 9, "y": 0}, - {"matrix": [0, 10], "x": 10, "y": 0}, - {"matrix": [0, 11], "x": 11, "y": 0}, - {"matrix": [0, 12], "x": 12, "y": 0}, - {"matrix": [0, 13], "x": 13, "y": 0}, - {"matrix": [1, 13], "x": 14, "y": 0}, - - {"matrix": [1, 0], "x": 0, "y": 1, "w": 1.5}, - {"matrix": [1, 1], "x": 1.5, "y": 1}, - {"matrix": [1, 2], "x": 2.5, "y": 1}, - {"matrix": [1, 3], "x": 3.5, "y": 1}, - {"matrix": [1, 4], "x": 4.5, "y": 1}, - {"matrix": [1, 5], "x": 5.5, "y": 1}, - {"matrix": [1, 6], "x": 6.5, "y": 1}, - {"matrix": [1, 7], "x": 7.5, "y": 1}, - {"matrix": [1, 8], "x": 8.5, "y": 1}, - {"matrix": [1, 9], "x": 9.5, "y": 1}, - {"matrix": [1, 10], "x": 10.5, "y": 1}, - {"matrix": [1, 11], "x": 11.5, "y": 1}, - {"matrix": [1, 12], "x": 12.5, "y": 1}, - {"matrix": [2, 13], "x": 13.5, "y": 1, "w": 1.5}, - - {"matrix": [2, 0], "x": 0, "y": 2, "w": 1.75}, - {"matrix": [2, 1], "x": 1.75, "y": 2}, - {"matrix": [2, 2], "x": 2.75, "y": 2}, - {"matrix": [2, 3], "x": 3.75, "y": 2}, - {"matrix": [2, 4], "x": 4.75, "y": 2}, - {"matrix": [2, 5], "x": 5.75, "y": 2}, - {"matrix": [2, 6], "x": 6.75, "y": 2}, - {"matrix": [2, 7], "x": 7.75, "y": 2}, - {"matrix": [2, 8], "x": 8.75, "y": 2}, - {"matrix": [2, 9], "x": 9.75, "y": 2}, - {"matrix": [2, 10], "x": 10.75, "y": 2}, - {"matrix": [2, 11], "x": 11.75, "y": 2}, - {"matrix": [2, 12], "x": 12.75, "y": 2, "w": 2.25}, - - {"matrix": [3, 0], "x": 0, "y": 3, "w": 2.25}, - {"matrix": [3, 2], "x": 2.25, "y": 3}, - {"matrix": [3, 3], "x": 3.25, "y": 3}, - {"matrix": [3, 4], "x": 4.25, "y": 3}, - {"matrix": [3, 5], "x": 5.25, "y": 3}, - {"matrix": [3, 6], "x": 6.25, "y": 3}, - {"matrix": [3, 7], "x": 7.25, "y": 3}, - {"matrix": [3, 8], "x": 8.25, "y": 3}, - {"matrix": [3, 9], "x": 9.25, "y": 3}, - {"matrix": [3, 10], "x": 10.25, "y": 3}, - {"matrix": [3, 11], "x": 11.25, "y": 3}, - {"matrix": [3, 12], "x": 12.25, "y": 3, "w": 1.75}, - {"matrix": [3, 13], "x": 14, "y": 3}, - - {"matrix": [5, 0], "x": 15.25, "y": 3}, - {"matrix": [5, 1], "x": 16.25, "y": 3}, - - {"matrix": [4, 0], "x": 0, "y": 4, "w": 1.5}, - {"matrix": [4, 2], "x": 1.5, "y": 4}, - {"matrix": [4, 3], "x": 2.5, "y": 4, "w": 1.5}, - {"matrix": [4, 7], "x": 4, "y": 4, "w": 7}, - {"matrix": [4, 11], "x": 11, "y": 4, "w": 1.5}, - {"matrix": [4, 12], "x": 12.5, "y": 4}, - {"matrix": [4, 13], "x": 13.5, "y": 4, "w": 1.5} - ] } } } diff --git a/keyboards/nightly_boards/n60_s/keymaps/ansi_encoder/keymap.c b/keyboards/nightly_boards/n60_s/keymaps/ansi_encoder/keymap.c deleted file mode 100644 index 9316b20c75..0000000000 --- a/keyboards/nightly_boards/n60_s/keymaps/ansi_encoder/keymap.c +++ /dev/null @@ -1,34 +0,0 @@ -/* Copyright 2020 Neil Brian Ramirez - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see <http://www.gnu.org/licenses/>. - */ -#include QMK_KEYBOARD_H - -const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { - /* Base */ - [0] = LAYOUT_60_ansi_split_bs_rshift_encoder( - KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_BSPC, - KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, - KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, - KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_RSFT, KC_VOLD, KC_VOLU, - KC_LCTL, MO(1), KC_LALT, KC_SPC, KC_RALT, KC_APP, KC_RGUI, KC_RCTL - ), - [1] = LAYOUT_60_ansi_split_bs_rshift_encoder( - QK_BOOT, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_DEL, KC_DEL, - KC_TRNS, KC_TRNS, KC_UP, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, - KC_TRNS, KC_LEFT, KC_DOWN, KC_RIGHT,KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_PGUP, KC_TRNS, - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_HOME, KC_END, KC_PGDN, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,KC_TRNS, KC_TRNS, KC_TRNS - ) -}; diff --git a/keyboards/nightly_boards/n60_s/keymaps/tsangan_encoder/keymap.c b/keyboards/nightly_boards/n60_s/keymaps/tsangan_encoder/keymap.c deleted file mode 100644 index cc25ac42e7..0000000000 --- a/keyboards/nightly_boards/n60_s/keymaps/tsangan_encoder/keymap.c +++ /dev/null @@ -1,34 +0,0 @@ -/* Copyright 2020 Neil Brian Ramirez - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see <http://www.gnu.org/licenses/>. - */ -#include QMK_KEYBOARD_H - -const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { - /* Base */ - [0] = LAYOUT_60_ansi_split_bs_rshift_tsangan_encoder( - KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_BSPC, - KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, - KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, - KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_RSFT, KC_VOLD, KC_VOLU, - KC_LCTL, MO(1), KC_LALT, KC_SPC, KC_RALT, KC_RGUI, KC_RCTL - ), - [1] = LAYOUT_60_ansi_split_bs_rshift_tsangan_encoder( - QK_BOOT, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_DEL, KC_DEL, - KC_TRNS, KC_TRNS, KC_UP, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, - KC_TRNS, KC_LEFT, KC_DOWN, KC_RIGHT,KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_PGUP, KC_TRNS, - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_HOME, KC_END, KC_PGDN, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS - ) -}; diff --git a/keyboards/nightly_boards/n60_s/keymaps/via/keymap.c b/keyboards/nightly_boards/n60_s/keymaps/via/keymap.c index d76c734782..04078c784e 100644 --- a/keyboards/nightly_boards/n60_s/keymaps/via/keymap.c +++ b/keyboards/nightly_boards/n60_s/keymaps/via/keymap.c @@ -17,32 +17,41 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { /* Base */ - [0] = LAYOUT_60_ansi_split_bs_rshift_encoder( + [0] = LAYOUT_60_ansi_split_bs_rshift( KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_BSPC, KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, - KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_LSFT, KC_LSFT, KC_VOLD, KC_VOLU, + KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_LSFT, KC_LSFT, KC_LCTL, MO(1), KC_LALT, KC_SPC, KC_LALT, KC_APP, KC_RGUI, KC_LCTL ), - [1] = LAYOUT_60_ansi_split_bs_rshift_encoder( + [1] = LAYOUT_60_ansi_split_bs_rshift( QK_BOOT, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F12, KC_F12, KC_DEL, KC_DEL, KC_TRNS, KC_TRNS, KC_UP, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_LEFT, KC_DOWN, KC_RIGHT,KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_PGUP, KC_TRNS, - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_HOME, KC_END, KC_PGDN, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_HOME, KC_END, KC_PGDN, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,KC_TRNS, KC_TRNS, KC_TRNS - ), - [2] = LAYOUT_60_ansi_split_bs_rshift_encoder( + ), + [2] = LAYOUT_60_ansi_split_bs_rshift( KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,KC_TRNS, KC_TRNS, KC_TRNS ), - [3] = LAYOUT_60_ansi_split_bs_rshift_encoder( + [3] = LAYOUT_60_ansi_split_bs_rshift( KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,KC_TRNS, KC_TRNS, KC_TRNS ) }; + +#ifdef ENCODER_MAP_ENABLE +const uint16_t PROGMEM encoder_map[][NUM_ENCODERS][NUM_DIRECTIONS] = { + [0] = { ENCODER_CCW_CW(KC_VOLD, KC_VOLU) }, + [1] = { ENCODER_CCW_CW(_______, _______) }, + [2] = { ENCODER_CCW_CW(_______, _______) }, + [3] = { ENCODER_CCW_CW(_______, _______) }, +}; +#endif diff --git a/keyboards/nightly_boards/n60_s/keymaps/via/rules.mk b/keyboards/nightly_boards/n60_s/keymaps/via/rules.mk index 36b7ba9cbc..1189f4ad19 100644 --- a/keyboards/nightly_boards/n60_s/keymaps/via/rules.mk +++ b/keyboards/nightly_boards/n60_s/keymaps/via/rules.mk @@ -1,2 +1,3 @@ VIA_ENABLE = yes LTO_ENABLE = yes +ENCODER_MAP_ENABLE = yes diff --git a/keyboards/nightly_boards/n60_s/n60_s.c b/keyboards/nightly_boards/n60_s/n60_s.c deleted file mode 100644 index dd0d23425b..0000000000 --- a/keyboards/nightly_boards/n60_s/n60_s.c +++ /dev/null @@ -1,28 +0,0 @@ -/* Copyright 2020 Neil Brian Ramirez - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see <http://www.gnu.org/licenses/>. - */ - -#include "n60_s.h" - -void matrix_scan_kb(void) { - encoder_action_unregister(); - matrix_scan_user(); -} - -bool encoder_update_kb(uint8_t index, bool clockwise) { -// if (!encoder_update_user(index, clockwise)) return false; - encoder_action_register(index, clockwise); - return true; -}; diff --git a/keyboards/nightly_boards/n60_s/n60_s.h b/keyboards/nightly_boards/n60_s/n60_s.h deleted file mode 100644 index 33cf8e0b68..0000000000 --- a/keyboards/nightly_boards/n60_s/n60_s.h +++ /dev/null @@ -1,20 +0,0 @@ -/* Copyright 2020 Neil Brian Ramirez - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see <http://www.gnu.org/licenses/>. - */ - -#pragma once - -#include "quantum.h" -#include "encoder_action.h" diff --git a/keyboards/nightly_boards/n60_s/rules.mk b/keyboards/nightly_boards/n60_s/rules.mk index a37378959e..f404ad0163 100644 --- a/keyboards/nightly_boards/n60_s/rules.mk +++ b/keyboards/nightly_boards/n60_s/rules.mk @@ -12,6 +12,3 @@ RGBLIGHT_ENABLE = yes # Enable keyboard RGB underglow AUDIO_ENABLE = yes # Audio output ENCODER_ENABLE = yes # Enable Rotary Encoders LTO_ENABLE = yes - -# Added encoder Action -SRC += encoder_action.c
\ No newline at end of file diff --git a/keyboards/nightly_boards/n87/config.h b/keyboards/nightly_boards/n87/config.h index 3ba7c40ea6..66fefbb2ef 100644 --- a/keyboards/nightly_boards/n87/config.h +++ b/keyboards/nightly_boards/n87/config.h @@ -17,11 +17,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #pragma once -#define RGBLED_NUM 16 -#define RGBLIGHT_HUE_STEP 8 -#define RGBLIGHT_SAT_STEP 8 -#define RGBLIGHT_VAL_STEP 8 -#define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */ #define RGBLIGHT_EFFECT_BREATHING #define RGBLIGHT_EFFECT_RAINBOW_MOOD #define RGBLIGHT_EFFECT_RAINBOW_SWIRL diff --git a/keyboards/nightly_boards/n87/info.json b/keyboards/nightly_boards/n87/info.json index 1be9d83f1c..352719c253 100644 --- a/keyboards/nightly_boards/n87/info.json +++ b/keyboards/nightly_boards/n87/info.json @@ -13,6 +13,12 @@ "rows": ["B0", "B1", "B2", "B3", "F1", "F0", "D7", "B4", "D1", "D2", "D3", "D5"] }, "diode_direction": "COL2ROW", + "rgblight": { + "saturation_steps": 8, + "brightness_steps": 8, + "led_count": 16, + "sleep": true + }, "ws2812": { "pin": "D0" }, diff --git a/keyboards/nightly_boards/n9/config.h b/keyboards/nightly_boards/n9/config.h index 30f781e600..03c7b48e8e 100644 --- a/keyboards/nightly_boards/n9/config.h +++ b/keyboards/nightly_boards/n9/config.h @@ -14,11 +14,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #pragma once -#define RGBLED_NUM 8 -#define RGBLIGHT_HUE_STEP 8 -#define RGBLIGHT_SAT_STEP 8 -#define RGBLIGHT_VAL_STEP 8 -#define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */ #define RGBLIGHT_EFFECT_BREATHING #define RGBLIGHT_EFFECT_RAINBOW_MOOD #define RGBLIGHT_EFFECT_RAINBOW_SWIRL diff --git a/keyboards/nightly_boards/n9/info.json b/keyboards/nightly_boards/n9/info.json index 1dfd4f6fda..0e26ab27af 100644 --- a/keyboards/nightly_boards/n9/info.json +++ b/keyboards/nightly_boards/n9/info.json @@ -13,6 +13,12 @@ "rows": ["F4", "B1", "B3"] }, "diode_direction": "COL2ROW", + "rgblight": { + "saturation_steps": 8, + "brightness_steps": 8, + "led_count": 8, + "sleep": true + }, "ws2812": { "pin": "F5" }, diff --git a/keyboards/nightly_boards/octopad/config.h b/keyboards/nightly_boards/octopad/config.h index 27c3d4bd02..b8b9535fb0 100644 --- a/keyboards/nightly_boards/octopad/config.h +++ b/keyboards/nightly_boards/octopad/config.h @@ -17,7 +17,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #pragma once -#define RGBLED_NUM 8 #define RGBLIGHT_EFFECT_BREATHING #define RGBLIGHT_EFFECT_RAINBOW_MOOD #define RGBLIGHT_EFFECT_RAINBOW_SWIRL @@ -29,10 +28,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #define RGBLIGHT_EFFECT_ALTERNATING #define RGBLIGHT_EFFECT_TWINKLE -/* Encoders */ -#define ENCODERS_CW_KEY { { 3, 2 },{ 1, 2 } } -#define ENCODERS_CCW_KEY { { 2, 2 },{ 0, 2 } } - /* Audio */ #define AUDIO_PIN B5 diff --git a/keyboards/nightly_boards/octopad/encoder_action.c b/keyboards/nightly_boards/octopad/encoder_action.c deleted file mode 100644 index 522fb58d5a..0000000000 --- a/keyboards/nightly_boards/octopad/encoder_action.c +++ /dev/null @@ -1,47 +0,0 @@ -/* Copyright 2020 Neil Brian Ramirez - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 3 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see <http://www.gnu.org/licenses/>. - */ - -#include "encoder_action.h" - -static uint8_t encoder_state[NUM_ENCODERS] = {0}; -static keypos_t encoder_cw[NUM_ENCODERS] = ENCODERS_CW_KEY; -static keypos_t encoder_ccw[NUM_ENCODERS] = ENCODERS_CCW_KEY; - -void encoder_action_unregister(void) { - for (int index = 0; index < NUM_ENCODERS; ++index) { - if (encoder_state[index]) { - keyevent_t encoder_event = (keyevent_t) { - .key = encoder_state[index] >> 1 ? encoder_cw[index] : encoder_ccw[index], - .pressed = false, - .time = timer_read(), - .type = KEY_EVENT - }; - encoder_state[index] = 0; - action_exec(encoder_event); - } - } -} - -void encoder_action_register(uint8_t index, bool clockwise) { - keyevent_t encoder_event = (keyevent_t) { - .key = clockwise ? encoder_cw[index] : encoder_ccw[index], - .pressed = true, - .time = timer_read(), - .type = KEY_EVENT - }; - encoder_state[index] = (clockwise ^ 1) | (clockwise << 1); - action_exec(encoder_event); -} diff --git a/keyboards/nightly_boards/octopad/encoder_action.h b/keyboards/nightly_boards/octopad/encoder_action.h deleted file mode 100644 index fb22632632..0000000000 --- a/keyboards/nightly_boards/octopad/encoder_action.h +++ /dev/null @@ -1,23 +0,0 @@ -/* Copyright 2020 Neil Brian Ramirez - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 3 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see <http://www.gnu.org/licenses/>. - */ - -#pragma once - -#include "quantum.h" - -void encoder_action_unregister(void); - -void encoder_action_register(uint8_t index, bool clockwise);
\ No newline at end of file diff --git a/keyboards/nightly_boards/octopad/info.json b/keyboards/nightly_boards/octopad/info.json index c78a58937d..0f1463e986 100644 --- a/keyboards/nightly_boards/octopad/info.json +++ b/keyboards/nightly_boards/octopad/info.json @@ -10,7 +10,7 @@ }, "matrix_pins": { "cols": ["F1", "F0", "D0", "D1", "B1"], - "rows": ["B2", "B3", null] + "rows": ["B2", "B3"] }, "diode_direction": "COL2ROW", "encoder": { @@ -19,6 +19,9 @@ {"pin_a": "F4", "pin_b": "F5"} ] }, + "rgblight": { + "led_count": 8 + }, "ws2812": { "pin": "F7" }, @@ -27,13 +30,9 @@ "layouts": { "LAYOUT": { "layout": [ - {"matrix": [2, 0], "x": 0, "y": 0}, {"matrix": [0, 4], "x": 1, "y": 0}, - {"matrix": [2, 1], "x": 2, "y": 0}, - {"matrix": [2, 2], "x": 3.5, "y": 0}, {"matrix": [1, 4], "x": 4.5, "y": 0}, - {"matrix": [2, 3], "x": 5.5, "y": 0}, {"matrix": [0, 0], "x": 1.25, "y": 1.25}, {"matrix": [0, 1], "x": 2.25, "y": 1.25}, diff --git a/keyboards/nightly_boards/octopad/keymaps/default/keymap.c b/keyboards/nightly_boards/octopad/keymaps/default/keymap.c index 7025c89375..94d8dc34f4 100644 --- a/keyboards/nightly_boards/octopad/keymaps/default/keymap.c +++ b/keyboards/nightly_boards/octopad/keymaps/default/keymap.c @@ -17,16 +17,15 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { - /* Base */ - /* ENC1_CCW, ENC1_P, ENC1_CW, ENC2_CCW, ENC2_P, ENC2_CW, - MACRO1, MACRO2, MACRO3, MACRO4, - MACRO5, MACRO6, MACRO7, MACRO8 - */ [0] = LAYOUT( - KC_VOLD, KC_ESC, KC_VOLU, KC_BRID, QK_BOOT, KC_BRIU, + KC_ESC, QK_BOOT, KC_Q, KC_W, KC_E, KC_R, KC_A, KC_S, KC_D, KC_F - - ), + ) }; +#ifdef ENCODER_MAP_ENABLE +const uint16_t PROGMEM encoder_map[][NUM_ENCODERS][NUM_DIRECTIONS] = { + [0] = { ENCODER_CCW_CW(KC_VOLD, KC_VOLU), ENCODER_CCW_CW(KC_BRID, KC_BRIU) } +}; +#endif diff --git a/keyboards/nightly_boards/octopad/keymaps/default/rules.mk b/keyboards/nightly_boards/octopad/keymaps/default/rules.mk new file mode 100644 index 0000000000..ee32568148 --- /dev/null +++ b/keyboards/nightly_boards/octopad/keymaps/default/rules.mk @@ -0,0 +1 @@ +ENCODER_MAP_ENABLE = yes diff --git a/keyboards/nightly_boards/octopad/keymaps/via/keymap.c b/keyboards/nightly_boards/octopad/keymaps/via/keymap.c index 44c2d63cc7..2f831466fc 100644 --- a/keyboards/nightly_boards/octopad/keymaps/via/keymap.c +++ b/keyboards/nightly_boards/octopad/keymaps/via/keymap.c @@ -17,57 +17,21 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { - /* Base */ - /* ENC1_CCW, ENC1_P, ENC1_CW, ENC2_CCW, ENC2_P, ENC2_CW, - MACRO1, MACRO2, MACRO3, MACRO4, - MACRO5, MACRO6, MACRO7, MACRO8 - */ [0] = LAYOUT( - KC_VOLD, KC_ESC, KC_VOLU, KC_BRID, QK_BOOT, KC_BRIU, + KC_ESC, QK_BOOT, KC_Q, KC_W, KC_E, KC_R, KC_A, KC_S, KC_D, KC_F - - ), - [1] = LAYOUT( - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS - - ), - [2] = LAYOUT( - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS - - ), - [3] = LAYOUT( - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS - - ), - [4] = LAYOUT( - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS - - ), - [5] = LAYOUT( - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS - - ), - [6] = LAYOUT( - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS - - ), - [7] = LAYOUT( - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS - ), + [1 ... 7] = LAYOUT( + _______, _______, + _______, _______, _______, _______, + _______, _______, _______, _______ + ) +}; + +#ifdef ENCODER_MAP_ENABLE +const uint16_t PROGMEM encoder_map[][NUM_ENCODERS][NUM_DIRECTIONS] = { + [0] = { ENCODER_CCW_CW(KC_VOLD, KC_VOLU), ENCODER_CCW_CW(KC_BRID, KC_BRIU) }, + [1 ... 7] = { ENCODER_CCW_CW(_______, _______), ENCODER_CCW_CW(_______, _______) } }; +#endif diff --git a/keyboards/nightly_boards/octopad/keymaps/via/rules.mk b/keyboards/nightly_boards/octopad/keymaps/via/rules.mk index 43061db1dd..1189f4ad19 100644 --- a/keyboards/nightly_boards/octopad/keymaps/via/rules.mk +++ b/keyboards/nightly_boards/octopad/keymaps/via/rules.mk @@ -1,2 +1,3 @@ VIA_ENABLE = yes -LTO_ENABLE = yes
\ No newline at end of file +LTO_ENABLE = yes +ENCODER_MAP_ENABLE = yes diff --git a/keyboards/nightly_boards/octopad/octopad.c b/keyboards/nightly_boards/octopad/octopad.c deleted file mode 100644 index e05782677e..0000000000 --- a/keyboards/nightly_boards/octopad/octopad.c +++ /dev/null @@ -1,28 +0,0 @@ -/* Copyright 2020 Neil Brian Ramirez - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see <http://www.gnu.org/licenses/>. - */ - -#include "octopad.h" - -void matrix_scan_kb(void) { - encoder_action_unregister(); - matrix_scan_user(); -} - -bool encoder_update_kb(uint8_t index, bool clockwise) { -// if (!encoder_update_user(index, clockwise)) return false; - encoder_action_register(index, clockwise); - return true; -}; diff --git a/keyboards/nightly_boards/octopad/octopad.h b/keyboards/nightly_boards/octopad/octopad.h deleted file mode 100644 index 33cf8e0b68..0000000000 --- a/keyboards/nightly_boards/octopad/octopad.h +++ /dev/null @@ -1,20 +0,0 @@ -/* Copyright 2020 Neil Brian Ramirez - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see <http://www.gnu.org/licenses/>. - */ - -#pragma once - -#include "quantum.h" -#include "encoder_action.h" diff --git a/keyboards/nightly_boards/octopad/rules.mk b/keyboards/nightly_boards/octopad/rules.mk index d36fbdc860..660f934499 100644 --- a/keyboards/nightly_boards/octopad/rules.mk +++ b/keyboards/nightly_boards/octopad/rules.mk @@ -12,6 +12,3 @@ BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality RGBLIGHT_ENABLE = yes # Enable keyboard RGB underglow AUDIO_ENABLE = yes # Audio output ENCODER_ENABLE = yes # Enable Rotary Encoders - -# Added encoder Action -SRC += encoder_action.c diff --git a/keyboards/nightly_boards/octopadplus/config.h b/keyboards/nightly_boards/octopadplus/config.h index 7547d5a97b..3d0b7f438c 100644 --- a/keyboards/nightly_boards/octopadplus/config.h +++ b/keyboards/nightly_boards/octopadplus/config.h @@ -17,8 +17,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #pragma once -#define TAP_CODE_DELAY 10 - /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ #define LOCKING_SUPPORT_ENABLE /* Locking resynchronize hack */ diff --git a/keyboards/nightly_boards/octopadplus/info.json b/keyboards/nightly_boards/octopadplus/info.json index 533cefc3c1..7a27cef020 100644 --- a/keyboards/nightly_boards/octopadplus/info.json +++ b/keyboards/nightly_boards/octopadplus/info.json @@ -19,6 +19,9 @@ {"pin_a": "D1", "pin_b": "D0", "resolution": 5} ] }, + "qmk": { + "tap_keycode_delay": 10 + }, "processor": "atmega32u4", "bootloader": "atmel-dfu", "rgblight": { diff --git a/keyboards/nix_studio/oxalys80/config.h b/keyboards/nix_studio/oxalys80/config.h index 52b5d011d9..9103d6e5d2 100644 --- a/keyboards/nix_studio/oxalys80/config.h +++ b/keyboards/nix_studio/oxalys80/config.h @@ -31,8 +31,3 @@ #define RGBLIGHT_EFFECT_RGB_TEST #define RGBLIGHT_EFFECT_ALTERNATING #define RGBLIGHT_EFFECT_TWINKLE -#define RGBLED_NUM 24 -#define RGBLIGHT_HUE_STEP 8 -#define RGBLIGHT_SAT_STEP 8 -#define RGBLIGHT_VAL_STEP 8 -#define RGBLIGHT_SLEEP // RGB will turn off when PC is put to sleep diff --git a/keyboards/nix_studio/oxalys80/info.json b/keyboards/nix_studio/oxalys80/info.json index 5c804d7182..cc1ea8c948 100644 --- a/keyboards/nix_studio/oxalys80/info.json +++ b/keyboards/nix_studio/oxalys80/info.json @@ -20,7 +20,11 @@ "pin": "B3" }, "rgblight": { - "max_brightness": 200 + "saturation_steps": 8, + "brightness_steps": 8, + "led_count": 24, + "max_brightness": 200, + "sleep": true }, "indicators": { "caps_lock": "E6", diff --git a/keyboards/novelkeys/nk1/config.h b/keyboards/novelkeys/nk1/config.h index c4cc79e624..a92c3b7211 100644 --- a/keyboards/novelkeys/nk1/config.h +++ b/keyboards/novelkeys/nk1/config.h @@ -17,11 +17,6 @@ #pragma once - #define RGBLED_NUM 9 - #define RGBLIGHT_HUE_STEP 8 - #define RGBLIGHT_SAT_STEP 8 - #define RGBLIGHT_VAL_STEP 8 - #define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */ #define RGBLIGHT_EFFECT_BREATHING #define RGBLIGHT_EFFECT_RAINBOW_MOOD #define RGBLIGHT_EFFECT_RAINBOW_SWIRL diff --git a/keyboards/novelkeys/nk1/info.json b/keyboards/novelkeys/nk1/info.json index b72492a6aa..f9c8e690cb 100755 --- a/keyboards/novelkeys/nk1/info.json +++ b/keyboards/novelkeys/nk1/info.json @@ -8,6 +8,12 @@ "pid": "0x4E4D", "device_version": "0.0.1" }, + "rgblight": { + "saturation_steps": 8, + "brightness_steps": 8, + "led_count": 9, + "sleep": true + }, "ws2812": { "pin": "F0" }, diff --git a/keyboards/novelkeys/nk20/config.h b/keyboards/novelkeys/nk20/config.h index 23b8d2915a..55d8b53e83 100644 --- a/keyboards/novelkeys/nk20/config.h +++ b/keyboards/novelkeys/nk20/config.h @@ -25,7 +25,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #define WS2812_DMA_STREAM STM32_DMA1_STREAM3 #define WS2812_DMA_CHANNEL 3 -#define RGBLED_NUM 20 #define RGB_MATRIX_LED_COUNT 20 #define RGB_MATRIX_MAXIMUM_BRIGHTNESS 210 #define RGB_DISABLE_WHEN_USB_SUSPENDED diff --git a/keyboards/novelkeys/nk20/rules.mk b/keyboards/novelkeys/nk20/rules.mk index 131bc94a44..9470fce1ba 100644 --- a/keyboards/novelkeys/nk20/rules.mk +++ b/keyboards/novelkeys/nk20/rules.mk @@ -1,11 +1,6 @@ # Wildcard to allow APM32 MCU DFU_SUFFIX_ARGS = -v FFFF -p FFFF -# Do not put the microcontroller into power saving mode -# when we get USB suspend event. We want it to keep updating -# backlight effects. -OPT_DEFS += -DCORTEX_ENABLE_WFI_IDLE=TRUE - # Build Options # change yes to no to disable # diff --git a/keyboards/novelkeys/nk65b/config.h b/keyboards/novelkeys/nk65b/config.h index a22f9b1685..e236351344 100755 --- a/keyboards/novelkeys/nk65b/config.h +++ b/keyboards/novelkeys/nk65b/config.h @@ -25,7 +25,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #define WS2812_DMA_STREAM STM32_DMA1_STREAM3 #define WS2812_DMA_CHANNEL 3 -#define RGBLED_NUM 68 #define RGB_MATRIX_LED_COUNT 68 #define RGB_MATRIX_MAXIMUM_BRIGHTNESS 130 #define RGB_DISABLE_WHEN_USB_SUSPENDED diff --git a/keyboards/novelkeys/nk65b/rules.mk b/keyboards/novelkeys/nk65b/rules.mk index 131bc94a44..9470fce1ba 100755..100644 --- a/keyboards/novelkeys/nk65b/rules.mk +++ b/keyboards/novelkeys/nk65b/rules.mk @@ -1,11 +1,6 @@ # Wildcard to allow APM32 MCU DFU_SUFFIX_ARGS = -v FFFF -p FFFF -# Do not put the microcontroller into power saving mode -# when we get USB suspend event. We want it to keep updating -# backlight effects. -OPT_DEFS += -DCORTEX_ENABLE_WFI_IDLE=TRUE - # Build Options # change yes to no to disable # diff --git a/keyboards/novelkeys/nk87b/config.h b/keyboards/novelkeys/nk87b/config.h index 49d3104c45..a0bbb315d4 100644 --- a/keyboards/novelkeys/nk87b/config.h +++ b/keyboards/novelkeys/nk87b/config.h @@ -25,7 +25,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #define WS2812_DMA_STREAM STM32_DMA1_STREAM3 #define WS2812_DMA_CHANNEL 3 -#define RGBLED_NUM 87 #define RGB_MATRIX_LED_COUNT 87 #define RGB_MATRIX_MAXIMUM_BRIGHTNESS 114 #define RGB_DISABLE_WHEN_USB_SUSPENDED diff --git a/keyboards/novelkeys/nk87b/rules.mk b/keyboards/novelkeys/nk87b/rules.mk index 131bc94a44..9470fce1ba 100644 --- a/keyboards/novelkeys/nk87b/rules.mk +++ b/keyboards/novelkeys/nk87b/rules.mk @@ -1,11 +1,6 @@ # Wildcard to allow APM32 MCU DFU_SUFFIX_ARGS = -v FFFF -p FFFF -# Do not put the microcontroller into power saving mode -# when we get USB suspend event. We want it to keep updating -# backlight effects. -OPT_DEFS += -DCORTEX_ENABLE_WFI_IDLE=TRUE - # Build Options # change yes to no to disable # diff --git a/keyboards/novelkeys/nk_plus/rules.mk b/keyboards/novelkeys/nk_plus/rules.mk index a68122281a..928a45cfae 100644 --- a/keyboards/novelkeys/nk_plus/rules.mk +++ b/keyboards/novelkeys/nk_plus/rules.mk @@ -1,11 +1,6 @@ # Wildcard to allow APM32 MCU DFU_SUFFIX_ARGS = -v FFFF -p FFFF -# Do not put the microcontroller into power saving mode -# when we get USB suspend event. We want it to keep updating -# backlight effects. -OPT_DEFS += -DCORTEX_ENABLE_WFI_IDLE=TRUE - # Build Options # change yes to no to disable # diff --git a/keyboards/novelkeys/novelpad/config.h b/keyboards/novelkeys/novelpad/config.h index 413efb67b0..95db869fcd 100755 --- a/keyboards/novelkeys/novelpad/config.h +++ b/keyboards/novelkeys/novelpad/config.h @@ -17,11 +17,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #pragma once - #define RGBLED_NUM 4 -// #define RGBLIGHT_HUE_STEP 8 -// #define RGBLIGHT_SAT_STEP 8 -// #define RGBLIGHT_VAL_STEP 8 -// #define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */ #define RGBLIGHT_EFFECT_BREATHING #define RGBLIGHT_EFFECT_RAINBOW_MOOD #define RGBLIGHT_EFFECT_RAINBOW_SWIRL diff --git a/keyboards/novelkeys/novelpad/info.json b/keyboards/novelkeys/novelpad/info.json index e98746ab29..a7dad32996 100644 --- a/keyboards/novelkeys/novelpad/info.json +++ b/keyboards/novelkeys/novelpad/info.json @@ -17,6 +17,9 @@ "pin": "B7", "levels": 10 }, + "rgblight": { + "led_count": 4 + }, "ws2812": { "pin": "D3" }, diff --git a/keyboards/novelkeys/novelpad/keymaps/0xdec/keymap.c b/keyboards/novelkeys/novelpad/keymaps/0xdec/keymap.c index 5380de9648..79a3e2fdbf 100755 --- a/keyboards/novelkeys/novelpad/keymaps/0xdec/keymap.c +++ b/keyboards/novelkeys/novelpad/keymaps/0xdec/keymap.c @@ -36,11 +36,12 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { }; -void led_set_user(uint8_t usb_led) { - if (usb_led & (1 << USB_LED_NUM_LOCK)) { +bool led_update_user(led_t led_state) { + if (led_state.num_lock) { // Illuminate the LED under the Num Lock key rgblight_sethsv_at(0, 0, 127, 1); } else { rgblight_sethsv_at(0, 0, 0, 1); } + return false; } diff --git a/keyboards/noxary/268/keymaps/ansi/keymap.c b/keyboards/noxary/268/keymaps/ansi/keymap.c index dac8e6c0dd..860d17177c 100644 --- a/keyboards/noxary/268/keymaps/ansi/keymap.c +++ b/keyboards/noxary/268/keymaps/ansi/keymap.c @@ -52,12 +52,13 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { }; -void led_set_user(uint8_t usb_led) { - if (usb_led & (1 << USB_LED_CAPS_LOCK)) { +bool led_update_user(led_t led_state) { + if (led_state.caps_lock) { setPinOutput(B6); writePinHigh(B6); } else { setPinInput(B6); writePinLow(B6); } + return false; } diff --git a/keyboards/noxary/268/keymaps/default/keymap.c b/keyboards/noxary/268/keymaps/default/keymap.c index 571396f21d..9023c6f81f 100644 --- a/keyboards/noxary/268/keymaps/default/keymap.c +++ b/keyboards/noxary/268/keymaps/default/keymap.c @@ -70,8 +70,8 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { }; -void led_set_user(uint8_t usb_led) { - if (usb_led & (1 << USB_LED_CAPS_LOCK)) { +bool led_update_user(led_t led_state) { + if (led_state.caps_lock) { setPinOutput(B6); writePinHigh(B6); } @@ -79,4 +79,5 @@ void led_set_user(uint8_t usb_led) { setPinInput(B6); writePinLow(B6); } + return false; } diff --git a/keyboards/noxary/268/keymaps/iso/keymap.c b/keyboards/noxary/268/keymaps/iso/keymap.c index 410883dd54..76462bf7fe 100644 --- a/keyboards/noxary/268/keymaps/iso/keymap.c +++ b/keyboards/noxary/268/keymaps/iso/keymap.c @@ -52,12 +52,13 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { }; -void led_set_user(uint8_t usb_led) { - if (usb_led & (1 << USB_LED_CAPS_LOCK)) { +bool led_update_user(led_t led_state) { + if (led_state.caps_lock) { setPinOutput(B6); writePinHigh(B6); } else { setPinInput(B6); writePinLow(B6); } + return false; } diff --git a/keyboards/noxary/268/keymaps/sixtyeight/keymap.c b/keyboards/noxary/268/keymaps/sixtyeight/keymap.c index 2502667d30..3527cf7ccc 100644 --- a/keyboards/noxary/268/keymaps/sixtyeight/keymap.c +++ b/keyboards/noxary/268/keymaps/sixtyeight/keymap.c @@ -70,52 +70,12 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { }; - -void matrix_init_user(void) { -} - -void matrix_scan_user(void) { -} - -bool process_record_user(uint16_t keycode, keyrecord_t *record) { - return true; -} - -void led_set_user(uint8_t usb_led) { - - if (usb_led & (1 << USB_LED_NUM_LOCK)) { - - } - else { - - } - - if (usb_led & (1 << USB_LED_CAPS_LOCK)) { +bool led_update_user(led_t led_state) { + if (led_state.caps_lock) { DDRB |= (1 << 6); PORTB |= (1 << 6); } else { DDRB &= ~(1 << 6); PORTB &= ~(1 << 6); } - - if (usb_led & (1 << USB_LED_SCROLL_LOCK)) { - - } - else { - - } - - if (usb_led & (1 << USB_LED_COMPOSE)) { - - } - else { - - } - - if (usb_led & (1 << USB_LED_KANA)) { - - } - else { - - } - + return false; } diff --git a/keyboards/noxary/268_2_rgb/config.h b/keyboards/noxary/268_2_rgb/config.h index 051782f146..20c5301861 100644 --- a/keyboards/noxary/268_2_rgb/config.h +++ b/keyboards/noxary/268_2_rgb/config.h @@ -25,10 +25,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #define RGBLIGHT_EFFECT_RGB_TEST #define RGBLIGHT_EFFECT_ALTERNATING #define RGBLIGHT_EFFECT_TWINKLE -#define RGBLED_NUM 16 -#define RGBLIGHT_HUE_STEP 16 -#define RGBLIGHT_SAT_STEP 16 -#define RGBLIGHT_VAL_STEP 16 /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ #define LOCKING_SUPPORT_ENABLE diff --git a/keyboards/noxary/268_2_rgb/info.json b/keyboards/noxary/268_2_rgb/info.json index d1f57bc5fc..b9378287c9 100644 --- a/keyboards/noxary/268_2_rgb/info.json +++ b/keyboards/noxary/268_2_rgb/info.json @@ -16,6 +16,12 @@ "backlight": { "pin": "B7" }, + "rgblight": { + "hue_steps": 16, + "saturation_steps": 16, + "brightness_steps": 16, + "led_count": 16 + }, "ws2812": { "pin": "B5" }, diff --git a/keyboards/noxary/378/rules.mk b/keyboards/noxary/378/rules.mk index 3c9c278b51..93e50cd795 100644 --- a/keyboards/noxary/378/rules.mk +++ b/keyboards/noxary/378/rules.mk @@ -11,5 +11,3 @@ BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow AUDIO_ENABLE = no # Audio output -# Enter lower-power sleep mode when on the ChibiOS idle thread -OPT_DEFS += -DCORTEX_ENABLE_WFI_IDLE=TRUE diff --git a/keyboards/noxary/valhalla/rules.mk b/keyboards/noxary/valhalla/rules.mk index 3c9c278b51..93e50cd795 100644 --- a/keyboards/noxary/valhalla/rules.mk +++ b/keyboards/noxary/valhalla/rules.mk @@ -11,5 +11,3 @@ BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow AUDIO_ENABLE = no # Audio output -# Enter lower-power sleep mode when on the ChibiOS idle thread -OPT_DEFS += -DCORTEX_ENABLE_WFI_IDLE=TRUE diff --git a/keyboards/noxary/x268/config.h b/keyboards/noxary/x268/config.h index 0f7486408c..f2a2a9584a 100644 --- a/keyboards/noxary/x268/config.h +++ b/keyboards/noxary/x268/config.h @@ -28,10 +28,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #define RGBLIGHT_EFFECT_RGB_TEST #define RGBLIGHT_EFFECT_ALTERNATING #define RGBLIGHT_EFFECT_TWINKLE -#define RGBLED_NUM 16 -#define RGBLIGHT_HUE_STEP 16 -#define RGBLIGHT_SAT_STEP 16 -#define RGBLIGHT_VAL_STEP 16 /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ #define LOCKING_SUPPORT_ENABLE diff --git a/keyboards/noxary/x268/info.json b/keyboards/noxary/x268/info.json index 1bfcf109f4..21ccfd911e 100644 --- a/keyboards/noxary/x268/info.json +++ b/keyboards/noxary/x268/info.json @@ -16,6 +16,12 @@ "backlight": { "pin": "B7" }, + "rgblight": { + "hue_steps": 16, + "saturation_steps": 16, + "brightness_steps": 16, + "led_count": 16 + }, "ws2812": { "pin": "B5" }, diff --git a/keyboards/nullbitsco/nibble/config.h b/keyboards/nullbitsco/nibble/config.h index 5ef3783b87..d33b8afb5e 100644 --- a/keyboards/nullbitsco/nibble/config.h +++ b/keyboards/nullbitsco/nibble/config.h @@ -39,7 +39,6 @@ #define MATRIX_COL_PINS { } /* Optional SMT LED pins */ -#define RGBLED_NUM 10 #define RGBLIGHT_EFFECT_BREATHING #define RGBLIGHT_EFFECT_RAINBOW_MOOD #define RGBLIGHT_EFFECT_RAINBOW_SWIRL @@ -50,4 +49,3 @@ #define RGBLIGHT_EFFECT_RGB_TEST #define RGBLIGHT_EFFECT_ALTERNATING #define RGBLIGHT_EFFECT_TWINKLE -#define RGBLIGHT_SLEEP diff --git a/keyboards/nullbitsco/nibble/info.json b/keyboards/nullbitsco/nibble/info.json index 7f24d36813..cc66623b09 100644 --- a/keyboards/nullbitsco/nibble/info.json +++ b/keyboards/nullbitsco/nibble/info.json @@ -12,6 +12,10 @@ {"pin_a": "B5", "pin_b": "B4"} ] }, + "rgblight": { + "led_count": 10, + "sleep": true + }, "ws2812": { "pin": "E6" }, diff --git a/keyboards/nullbitsco/scramble/v1/config.h b/keyboards/nullbitsco/scramble/v1/config.h deleted file mode 100644 index bb0ee7d785..0000000000 --- a/keyboards/nullbitsco/scramble/v1/config.h +++ /dev/null @@ -1,22 +0,0 @@ -/* -Copyright 2021 Jay Greco - -This program is free software: you can redistribute it and/or modify -it under the terms of the GNU General Public License as published by -the Free Software Foundation, either version 2 of the License, or -(at your option) any later version. - -This program is distributed in the hope that it will be useful, -but WITHOUT ANY WARRANTY; without even the implied warranty of -MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -GNU General Public License for more details. - -You should have received a copy of the GNU General Public License -along with this program. If not, see <http://www.gnu.org/licenses/>. -*/ - -/* NOTE: This config file is specific to AVR builds. */ - -#pragma once - -#define TAP_CODE_DELAY 10 diff --git a/keyboards/nullbitsco/scramble/v1/info.json b/keyboards/nullbitsco/scramble/v1/info.json index 77a00d91f4..5a9aeef64b 100644 --- a/keyboards/nullbitsco/scramble/v1/info.json +++ b/keyboards/nullbitsco/scramble/v1/info.json @@ -4,6 +4,9 @@ {"pin_a": "D6", "pin_b": "D7"} ] }, + "qmk": { + "tap_keycode_delay": 10 + }, "processor": "atmega328p", "bootloader": "usbasploader", "matrix_pins": { diff --git a/keyboards/nullbitsco/scramble/v2/config.h b/keyboards/nullbitsco/scramble/v2/config.h index 945a4da9de..419a028c9f 100644 --- a/keyboards/nullbitsco/scramble/v2/config.h +++ b/keyboards/nullbitsco/scramble/v2/config.h @@ -19,8 +19,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #pragma once -#define TAP_CODE_DELAY 10 - /* RP2040-specific defines*/ #define PICO_XOSC_STARTUP_DELAY_MULTIPLIER 64 #define RP2040_FLASH_GENERIC_03H diff --git a/keyboards/nullbitsco/scramble/v2/info.json b/keyboards/nullbitsco/scramble/v2/info.json index 5255c32205..2a89a1063b 100644 --- a/keyboards/nullbitsco/scramble/v2/info.json +++ b/keyboards/nullbitsco/scramble/v2/info.json @@ -4,6 +4,9 @@ {"pin_a": "GP24", "pin_b": "GP25"} ] }, + "qmk": { + "tap_keycode_delay": 10 + }, "processor": "RP2040", "bootloader": "rp2040", "matrix_pins": { diff --git a/keyboards/nullbitsco/snap/config.h b/keyboards/nullbitsco/snap/config.h index 24e9340c0e..e859b5b47d 100644 --- a/keyboards/nullbitsco/snap/config.h +++ b/keyboards/nullbitsco/snap/config.h @@ -58,10 +58,6 @@ #define MATRIX_EXT_PIN_RIGHT B6 /* Optional SMT LED pins */ -#define RGBLED_NUM 10 -#define RGBLED_SPLIT { 5, 5 } -#define RGBLIGHT_LED_MAP { 8, 9, 0, 1, 2, 6, 7, 3, 4, 5 } -#define RGBLIGHT_SLEEP #define RGBLIGHT_EFFECT_BREATHING #define RGBLIGHT_EFFECT_RAINBOW_MOOD #define RGBLIGHT_EFFECT_RAINBOW_SWIRL @@ -73,12 +69,6 @@ #define RGBLIGHT_EFFECT_ALTERNATING #define RGBLIGHT_EFFECT_TWINKLE -/* Optional encoder pins */ -#define ENCODERS_PAD_A { B3 } -#define ENCODERS_PAD_B { B1 } -#define ENCODERS_PAD_A_RIGHT { B4 } -#define ENCODERS_PAD_B_RIGHT { B5 } - /* Optional speaker pin */ #define AUDIO_PIN B6 diff --git a/keyboards/nullbitsco/snap/info.json b/keyboards/nullbitsco/snap/info.json index 560389a11f..97b06b5b34 100644 --- a/keyboards/nullbitsco/snap/info.json +++ b/keyboards/nullbitsco/snap/info.json @@ -7,6 +7,26 @@ "pid": "0x6063", "device_version": "0.0.1" }, + "encoder": { + "rotary": [ + {"pin_a": "B3", "pin_b": "B1"} + ] + }, + "rgblight": { + "led_count": 10, + "sleep": true, + "led_map": [8, 9, 0, 1, 2, 6, 7, 3, 4, 5], + "split_count": [5, 5] + }, + "split": { + "encoder": { + "right": { + "rotary": [ + {"pin_a": "B4", "pin_b": "B5"} + ] + } + } + }, "ws2812": { "pin": "B2" }, diff --git a/keyboards/nullbitsco/snap/keymaps/bongo_reactive/keymap.c b/keyboards/nullbitsco/snap/keymaps/bongo_reactive/keymap.c index 31e58c24a6..3dfe7e4057 100644 --- a/keyboards/nullbitsco/snap/keymaps/bongo_reactive/keymap.c +++ b/keyboards/nullbitsco/snap/keymaps/bongo_reactive/keymap.c @@ -87,27 +87,27 @@ static void render_status(void) { // Host Keyboard LED Status oled_set_cursor(0, 1); - static uint8_t persistent_led_state = 0; - uint8_t led_usb_state = host_keyboard_leds(); + static led_t persistent_led_state = {0}; + led_t led_state = host_keyboard_led_state(); // Only update if the LED state has changed // Otherwise, the OLED will not turn off if an LED is on. - if (persistent_led_state != led_usb_state) { - persistent_led_state = led_usb_state; + if (persistent_led_state != led_state) { + persistent_led_state = led_state; oled_write_ln_P(PSTR(""), false); - if (IS_LED_ON(led_usb_state, USB_LED_CAPS_LOCK)) { + if (led_state.caps_lock) { oled_set_cursor(0, 1); oled_write_P(PSTR("CAPS"), false); } - if (IS_LED_ON(led_usb_state, USB_LED_NUM_LOCK)) { + if (led_state.num_lock) { oled_set_cursor(5, 1); oled_write_P(PSTR("NUM"), true); } - if (IS_LED_ON(led_usb_state, USB_LED_SCROLL_LOCK)) { + if (led_state.scroll_lock) { oled_set_cursor(9, 1); oled_write_P(PSTR("SCR"), false); } diff --git a/keyboards/nullbitsco/snap/keymaps/oled/keymap.c b/keyboards/nullbitsco/snap/keymaps/oled/keymap.c index 3a48e90134..004d2f40c1 100644 --- a/keyboards/nullbitsco/snap/keymaps/oled/keymap.c +++ b/keyboards/nullbitsco/snap/keymaps/oled/keymap.c @@ -114,27 +114,27 @@ static void render_status(void) { // Host Keyboard LED Status oled_set_cursor(0, 1); - static uint8_t persistent_led_state = 0; - uint8_t led_usb_state = host_keyboard_leds(); + static led_t persistent_led_state = {0}; + led_t led_state = host_keyboard_led_state(); // Only update if the LED state has changed // Otherwise, the OLED will not turn off if an LED is on. - if (persistent_led_state != led_usb_state) { - persistent_led_state = led_usb_state; + if (persistent_led_state != led_state) { + persistent_led_state = led_state; oled_write_ln_P(PSTR(""), false); - if (IS_LED_ON(led_usb_state, USB_LED_CAPS_LOCK)) { + if (led_state.caps_lock) { oled_set_cursor(0, 1); oled_write_P(PSTR("CAPS"), false); } - if (IS_LED_ON(led_usb_state, USB_LED_NUM_LOCK)) { + if (led_state.num_lock) { oled_set_cursor(5, 1); oled_write_P(PSTR("NUM"), true); } - if (IS_LED_ON(led_usb_state, USB_LED_SCROLL_LOCK)) { + if (led_state.scroll_lock) { oled_set_cursor(9, 1); oled_write_P(PSTR("SCR"), false); } diff --git a/keyboards/nullbitsco/snap/keymaps/typehud/keymap.c b/keyboards/nullbitsco/snap/keymaps/typehud/keymap.c index 50e164f408..afdc5333ee 100644 --- a/keyboards/nullbitsco/snap/keymaps/typehud/keymap.c +++ b/keyboards/nullbitsco/snap/keymaps/typehud/keymap.c @@ -94,27 +94,27 @@ static void render_status(void) { // Host Keyboard LED Status oled_set_cursor(0, 1); - static uint8_t persistent_led_state = 0; - uint8_t led_usb_state = host_keyboard_leds(); + static led_t persistent_led_state = {0}; + led_t led_state = host_keyboard_led_state(); // Only update if the LED state has changed // Otherwise, the OLED will not turn off if an LED is on. - if (persistent_led_state != led_usb_state) { - persistent_led_state = led_usb_state; + if (persistent_led_state != led_state) { + persistent_led_state = led_state; oled_write_ln_P(PSTR(" "), false); - if (IS_LED_ON(led_usb_state, USB_LED_CAPS_LOCK)) { + if (led_state.caps_lock) { oled_set_cursor(0, 1); oled_write_P(PSTR("CAPS"), false); } - if (IS_LED_ON(led_usb_state, USB_LED_NUM_LOCK)) { + if (led_state.num_lock) { oled_set_cursor(5, 1); oled_write_P(PSTR("NUM"), true); } - if (IS_LED_ON(led_usb_state, USB_LED_SCROLL_LOCK)) { + if (led_state.scroll_lock) { oled_set_cursor(9, 1); oled_write_P(PSTR("SCR"), false); } diff --git a/keyboards/nullbitsco/tidbit/config.h b/keyboards/nullbitsco/tidbit/config.h index 346a8fb8a8..56477ea5c4 100644 --- a/keyboards/nullbitsco/tidbit/config.h +++ b/keyboards/nullbitsco/tidbit/config.h @@ -23,7 +23,6 @@ #define USB_SUSPEND_WAKEUP_DELAY 200 /* Optional SMT LED pins */ -#define RGBLED_NUM 8 #define RGBLIGHT_EFFECT_BREATHING #define RGBLIGHT_EFFECT_RAINBOW_MOOD #define RGBLIGHT_EFFECT_RAINBOW_SWIRL diff --git a/keyboards/nullbitsco/tidbit/info.json b/keyboards/nullbitsco/tidbit/info.json index 0ed0a5e7b8..0fb13a25c2 100644 --- a/keyboards/nullbitsco/tidbit/info.json +++ b/keyboards/nullbitsco/tidbit/info.json @@ -7,6 +7,9 @@ "pid": "0x6064", "device_version": "0.0.1" }, + "rgblight": { + "led_count": 8 + }, "ws2812": { "pin": "B6" }, @@ -32,33 +35,21 @@ {"matrix": [0, 4], "x": 4.25, "y": 0}, {"matrix": [0, 5], "x": 5.25, "y": 0}, - {"matrix": [1, 0], "x": 0, "y": 1}, - {"matrix": [1, 1], "x": 1, "y": 1}, - {"matrix": [1, 2], "x": 2.25, "y": 1}, {"matrix": [1, 3], "x": 3.25, "y": 1}, {"matrix": [1, 4], "x": 4.25, "y": 1}, {"matrix": [1, 5], "x": 5.25, "y": 1}, - {"matrix": [2, 0], "x": 0, "y": 2}, - {"matrix": [2, 1], "x": 1, "y": 2}, - {"matrix": [2, 2], "x": 2.25, "y": 2}, {"matrix": [2, 3], "x": 3.25, "y": 2}, {"matrix": [2, 4], "x": 4.25, "y": 2}, {"matrix": [2, 5], "x": 5.25, "y": 2}, - {"matrix": [3, 0], "x": 0, "y": 3}, - {"matrix": [3, 1], "x": 1, "y": 3}, - {"matrix": [3, 2], "x": 2.25, "y": 3}, {"matrix": [3, 3], "x": 3.25, "y": 3}, {"matrix": [3, 4], "x": 4.25, "y": 3}, {"matrix": [3, 5], "x": 5.25, "y": 3}, - {"matrix": [4, 0], "x": 0, "y": 4}, - {"matrix": [4, 1], "x": 1, "y": 4}, - {"matrix": [4, 2], "x": 2.25, "y": 4}, {"matrix": [4, 3], "x": 3.25, "y": 4}, {"matrix": [4, 4], "x": 4.25, "y": 4}, diff --git a/keyboards/nullbitsco/tidbit/keymaps/default/keymap.c b/keyboards/nullbitsco/tidbit/keymaps/default/keymap.c index 6cd9f48c94..8f552d30c1 100644 --- a/keyboards/nullbitsco/tidbit/keymaps/default/keymap.c +++ b/keyboards/nullbitsco/tidbit/keymaps/default/keymap.c @@ -22,19 +22,26 @@ enum layers { }; const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { - [_BASE] = LAYOUT( - KC_PSLS, KC_PAST, KC_PMNS, - KC_VOLD, KC_VOLU, KC_P7, KC_P8, KC_P9, KC_PPLS, - KC_MPRV, KC_MNXT, KC_P4, KC_P5, KC_P6, KC_PPLS, - KC_LEFT, KC_RGHT, KC_P1, KC_P2, KC_P3, KC_PENT, - KC_TRNS, KC_TRNS, KC_P0, KC_P0, KC_PDOT, KC_PENT - ), + [_BASE] = LAYOUT( + KC_PSLS, KC_PAST, KC_PMNS, + KC_P7, KC_P8, KC_P9, KC_PPLS, + KC_P4, KC_P5, KC_P6, KC_PPLS, + KC_P1, KC_P2, KC_P3, KC_PENT, + KC_P0, KC_P0, KC_PDOT, KC_PENT + ), [_FUNC] = LAYOUT( - _______, _______, _______, - _______, _______, _______, _______, _______, _______, - _______, _______, _______, _______, _______, _______, - _______, _______, _______, _______, _______, _______, - _______, _______, _______, _______, _______, _______ - ), + _______, _______, _______, + _______, _______, _______, _______, + _______, _______, _______, _______, + _______, _______, _______, _______, + _______, _______, _______, _______ + ) }; + +#ifdef ENCODER_MAP_ENABLE +const uint16_t PROGMEM encoder_map[][NUM_ENCODERS][NUM_DIRECTIONS] = { + [0] = { ENCODER_CCW_CW(KC_VOLD, KC_VOLU), ENCODER_CCW_CW(_______, _______), ENCODER_CCW_CW(_______, _______), ENCODER_CCW_CW(_______, _______), }, + [1] = { ENCODER_CCW_CW(_______, _______), ENCODER_CCW_CW(_______, _______), ENCODER_CCW_CW(_______, _______), ENCODER_CCW_CW(_______, _______), }, +}; +#endif diff --git a/keyboards/nullbitsco/tidbit/keymaps/default/rules.mk b/keyboards/nullbitsco/tidbit/keymaps/default/rules.mk new file mode 100644 index 0000000000..ee32568148 --- /dev/null +++ b/keyboards/nullbitsco/tidbit/keymaps/default/rules.mk @@ -0,0 +1 @@ +ENCODER_MAP_ENABLE = yes diff --git a/keyboards/nullbitsco/tidbit/keymaps/oled/keymap.c b/keyboards/nullbitsco/tidbit/keymaps/oled/keymap.c index 2555026534..642870640e 100644 --- a/keyboards/nullbitsco/tidbit/keymaps/oled/keymap.c +++ b/keyboards/nullbitsco/tidbit/keymaps/oled/keymap.c @@ -25,34 +25,40 @@ enum layers { const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { [_BASE] = LAYOUT( - KC_PSLS, KC_PAST, KC_PMNS, - KC_VOLD, KC_VOLU, KC_P7, KC_P8, KC_P9, KC_PPLS, - KC_TRNS, KC_TRNS, KC_P4, KC_P5, KC_P6, KC_PPLS, - KC_TRNS, KC_TRNS, KC_P1, KC_P2, KC_P3, KC_PENT, - KC_TRNS, KC_TRNS, KC_P0, KC_P0, KC_PDOT, KC_PENT + KC_PSLS, KC_PAST, KC_PMNS, + KC_P7, KC_P8, KC_P9, KC_PPLS, + KC_P4, KC_P5, KC_P6, KC_PPLS, + KC_P1, KC_P2, KC_P3, KC_PENT, + KC_P0, KC_P0, KC_PDOT, KC_PENT ), - [_VIA1] = LAYOUT( - _______, _______, _______, - _______, _______, _______, _______, _______, _______, - _______, _______, _______, _______, _______, _______, - _______, _______, _______, _______, _______, _______, - _______, _______, _______, _______, _______, _______ + _______, _______, _______, + _______, _______, _______, _______, + _______, _______, _______, _______, + _______, _______, _______, _______, + _______, _______, _______, _______ ), - [_VIA2] = LAYOUT( - _______, _______, _______, - _______, _______, _______, _______, _______, _______, - _______, _______, _______, _______, _______, _______, - _______, _______, _______, _______, _______, _______, - _______, _______, _______, _______, _______, _______ + _______, _______, _______, + _______, _______, _______, _______, + _______, _______, _______, _______, + _______, _______, _______, _______, + _______, _______, _______, _______ ), - [_VIA3] = LAYOUT( - _______, _______, _______, - _______, _______, _______, _______, _______, _______, - _______, _______, _______, _______, _______, _______, - _______, _______, _______, _______, _______, _______, - _______, _______, _______, _______, _______, _______ - ), + _______, _______, _______, + _______, _______, _______, _______, + _______, _______, _______, _______, + _______, _______, _______, _______, + _______, _______, _______, _______ + ) +}; + +#ifdef ENCODER_MAP_ENABLE +const uint16_t PROGMEM encoder_map[][NUM_ENCODERS][NUM_DIRECTIONS] = { + [0] = { ENCODER_CCW_CW(KC_VOLD, KC_VOLU), ENCODER_CCW_CW(_______, _______), ENCODER_CCW_CW(_______, _______), ENCODER_CCW_CW(_______, _______), }, + [1] = { ENCODER_CCW_CW(_______, _______), ENCODER_CCW_CW(_______, _______), ENCODER_CCW_CW(_______, _______), ENCODER_CCW_CW(_______, _______), }, + [2] = { ENCODER_CCW_CW(_______, _______), ENCODER_CCW_CW(_______, _______), ENCODER_CCW_CW(_______, _______), ENCODER_CCW_CW(_______, _______), }, + [3] = { ENCODER_CCW_CW(_______, _______), ENCODER_CCW_CW(_______, _______), ENCODER_CCW_CW(_______, _______), ENCODER_CCW_CW(_______, _______), }, }; +#endif diff --git a/keyboards/nullbitsco/tidbit/keymaps/oled/rules.mk b/keyboards/nullbitsco/tidbit/keymaps/oled/rules.mk index ef531564fc..1b3509eac8 100644 --- a/keyboards/nullbitsco/tidbit/keymaps/oled/rules.mk +++ b/keyboards/nullbitsco/tidbit/keymaps/oled/rules.mk @@ -1,3 +1,4 @@ VIA_ENABLE = yes OLED_ENABLE = yes OLED_DRIVER = SSD1306 +ENCODER_MAP_ENABLE = yes diff --git a/keyboards/nullbitsco/tidbit/keymaps/snailmap_lite/keymap.c b/keyboards/nullbitsco/tidbit/keymaps/snailmap_lite/keymap.c index 32306ef9d6..d14723df03 100644 --- a/keyboards/nullbitsco/tidbit/keymaps/snailmap_lite/keymap.c +++ b/keyboards/nullbitsco/tidbit/keymaps/snailmap_lite/keymap.c @@ -25,38 +25,44 @@ enum layer_names { const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { [_LAY0] = LAYOUT( - KC_PSLS, KC_PAST, KC_PMNS, - KC_VOLD, KC_VOLU, KC_P7, KC_P8, KC_P9, KC_PPLS, - KC_TRNS, KC_TRNS, KC_P4, KC_P5, KC_P6, KC_PPLS, - KC_TRNS, KC_TRNS, KC_P1, KC_P2, KC_P3, KC_PENT, - KC_TRNS, KC_TRNS, KC_P0, KC_P0, KC_PDOT, KC_PENT + KC_PSLS, KC_PAST, KC_PMNS, + KC_P7, KC_P8, KC_P9, KC_PPLS, + KC_P4, KC_P5, KC_P6, KC_PPLS, + KC_P1, KC_P2, KC_P3, KC_PENT, + KC_P0, KC_P0, KC_PDOT, KC_PENT ), - [_LAY1] = LAYOUT( - _______, _______, _______, - _______, _______, _______, _______, _______, _______, - _______, _______, _______, _______, _______, _______, - _______, _______, _______, _______, _______, _______, - _______, _______, _______, _______, _______, _______ + _______, _______, _______, + _______, _______, _______, _______, + _______, _______, _______, _______, + _______, _______, _______, _______, + _______, _______, _______, _______ ), - [_LAY2] = LAYOUT( - _______, _______, _______, - _______, _______, _______, _______, _______, _______, - _______, _______, _______, _______, _______, _______, - _______, _______, _______, _______, _______, _______, - _______, _______, _______, _______, _______, _______ + _______, _______, _______, + _______, _______, _______, _______, + _______, _______, _______, _______, + _______, _______, _______, _______, + _______, _______, _______, _______ ), - [_LAY3] = LAYOUT( - _______, _______, _______, - _______, _______, _______, _______, _______, _______, - _______, _______, _______, _______, _______, _______, - _______, _______, _______, _______, _______, _______, - _______, _______, _______, _______, _______, _______ - ), + _______, _______, _______, + _______, _______, _______, _______, + _______, _______, _______, _______, + _______, _______, _______, _______, + _______, _______, _______, _______ + ) }; +#ifdef ENCODER_MAP_ENABLE +const uint16_t PROGMEM encoder_map[][NUM_ENCODERS][NUM_DIRECTIONS] = { + [0] = { ENCODER_CCW_CW(KC_VOLD, KC_VOLU), ENCODER_CCW_CW(_______, _______), ENCODER_CCW_CW(_______, _______), ENCODER_CCW_CW(_______, _______), }, + [1] = { ENCODER_CCW_CW(_______, _______), ENCODER_CCW_CW(_______, _______), ENCODER_CCW_CW(_______, _______), ENCODER_CCW_CW(_______, _______), }, + [2] = { ENCODER_CCW_CW(_______, _______), ENCODER_CCW_CW(_______, _______), ENCODER_CCW_CW(_______, _______), ENCODER_CCW_CW(_______, _______), }, + [3] = { ENCODER_CCW_CW(_______, _______), ENCODER_CCW_CW(_______, _______), ENCODER_CCW_CW(_______, _______), ENCODER_CCW_CW(_______, _______), }, +}; +#endif + #ifdef OLED_ENABLE /*=========================================== OLED CONFIGURATION ===========================================*/ #define OLED_ROTATE true // OLED rotation (flip 180* from default orientation) @@ -112,18 +118,18 @@ oled_rotation_t oled_init_user(oled_rotation_t rotation) { // Draw static background image to OLED (keyboard with no bottom row) static void render_background(void) { static const char PROGMEM nullbits_n_oled[] = { - 0x00, 0xe0, 0xf0, 0xf0, 0xf8, 0xf8, 0xf0, 0xf0, 0xe0, 0x80, 0x20, 0xf0, 0xf0, 0xf0, 0xf0, 0xf0, - 0xf0, 0xf0, 0xf0, 0xf0, 0xf0, 0xe0, 0xe0, 0xe0, 0xc0, 0x80, 0x80, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0x00, 0x1f, 0x1f, 0x1f, 0x1f, 0x1f, - 0x1f, 0x1f, 0x1f, 0x1f, 0x3f, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xfe, 0xfc, 0xf0, 0x00, 0x00, - 0x00, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xfe, 0x00, - 0x00, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0x00, - 0x00, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0x00, - 0x00, 0x07, 0x0f, 0x0f, 0x0f, 0x0f, 0x0f, 0x0f, 0x07, 0x01, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x07, 0x0f, 0x0f, 0x0f, 0x0f, 0x0f, 0x0f, 0x07, 0x03, 0x00, + 0x00, 0xe0, 0xf0, 0xf0, 0xf8, 0xf8, 0xf0, 0xf0, 0xe0, 0x80, 0x20, 0xf0, 0xf0, 0xf0, 0xf0, 0xf0, + 0xf0, 0xf0, 0xf0, 0xf0, 0xf0, 0xe0, 0xe0, 0xe0, 0xc0, 0x80, 0x80, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0x00, 0x1f, 0x1f, 0x1f, 0x1f, 0x1f, + 0x1f, 0x1f, 0x1f, 0x1f, 0x3f, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xfe, 0xfc, 0xf0, 0x00, 0x00, + 0x00, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xfe, 0x00, + 0x00, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0x00, + 0x00, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0x00, + 0x00, 0x07, 0x0f, 0x0f, 0x0f, 0x0f, 0x0f, 0x0f, 0x07, 0x01, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x07, 0x0f, 0x0f, 0x0f, 0x0f, 0x0f, 0x0f, 0x07, 0x03, 0x00, }; oled_write_raw_P(nullbits_n_oled, sizeof(nullbits_n_oled)); } @@ -173,13 +179,13 @@ static void render_wpm_counters(uint8_t current_wpm) { static void render_led_status(void) { // Host Keyboard LED Status - uint8_t led_usb_state = host_keyboard_leds(); + led_t led_state = host_keyboard_led_state(); oled_set_cursor(0, 8); - oled_write_P(IS_LED_ON(led_usb_state, USB_LED_CAPS_LOCK) ? PSTR(CAPLCK_STR) : PSTR(EMPTY_STR), false); + oled_write_P(led_state.caps_lock ? PSTR(CAPLCK_STR) : PSTR(EMPTY_STR), false); oled_set_cursor(0, 9); - oled_write_P(IS_LED_ON(led_usb_state, USB_LED_NUM_LOCK) ? PSTR(NUMLCK_STR) : PSTR(EMPTY_STR), false); + oled_write_P(led_state.num_lock ? PSTR(NUMLCK_STR) : PSTR(EMPTY_STR), false); oled_set_cursor(0, 10); - oled_write_P(IS_LED_ON(led_usb_state, USB_LED_SCROLL_LOCK) ? PSTR(SCRLK_STR) : PSTR(EMPTY_STR), false); + oled_write_P(led_state.scroll_lock ? PSTR(SCRLK_STR) : PSTR(EMPTY_STR), false); } // Update WPM snail icon diff --git a/keyboards/nullbitsco/tidbit/keymaps/snailmap_lite/rules.mk b/keyboards/nullbitsco/tidbit/keymaps/snailmap_lite/rules.mk index 1b72fd006a..605f034e1d 100644 --- a/keyboards/nullbitsco/tidbit/keymaps/snailmap_lite/rules.mk +++ b/keyboards/nullbitsco/tidbit/keymaps/snailmap_lite/rules.mk @@ -4,3 +4,4 @@ VIA_ENABLE = yes SPACE_CADET_ENABLE = no GRAVE_ESC_ENABLE = no MAGIC_ENABLE = no +ENCODER_MAP_ENABLE = yes diff --git a/keyboards/nullbitsco/tidbit/keymaps/via/keymap.c b/keyboards/nullbitsco/tidbit/keymaps/via/keymap.c index 895b02c292..642870640e 100644 --- a/keyboards/nullbitsco/tidbit/keymaps/via/keymap.c +++ b/keyboards/nullbitsco/tidbit/keymaps/via/keymap.c @@ -24,36 +24,41 @@ enum layers { }; const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { - [_BASE] = LAYOUT( - KC_PSLS, KC_PAST, KC_PMNS, - KC_VOLD, KC_VOLU, KC_P7, KC_P8, KC_P9, KC_PPLS, - KC_TRNS, KC_TRNS, KC_P4, KC_P5, KC_P6, KC_PPLS, - KC_TRNS, KC_TRNS, KC_P1, KC_P2, KC_P3, KC_PENT, - KC_TRNS, KC_TRNS, KC_P0, KC_P0, KC_PDOT, KC_PENT - ), - - [_VIA1] = LAYOUT( - _______, _______, _______, - _______, _______, _______, _______, _______, _______, - _______, _______, _______, _______, _______, _______, - _______, _______, _______, _______, _______, _______, - _______, _______, _______, _______, _______, _______ - ), - - [_VIA2] = LAYOUT( - _______, _______, _______, - _______, _______, _______, _______, _______, _______, - _______, _______, _______, _______, _______, _______, - _______, _______, _______, _______, _______, _______, - _______, _______, _______, _______, _______, _______ - ), - - [_VIA3] = LAYOUT( - _______, _______, _______, - _______, _______, _______, _______, _______, _______, - _______, _______, _______, _______, _______, _______, - _______, _______, _______, _______, _______, _______, - _______, _______, _______, _______, _______, _______ - ), + [_BASE] = LAYOUT( + KC_PSLS, KC_PAST, KC_PMNS, + KC_P7, KC_P8, KC_P9, KC_PPLS, + KC_P4, KC_P5, KC_P6, KC_PPLS, + KC_P1, KC_P2, KC_P3, KC_PENT, + KC_P0, KC_P0, KC_PDOT, KC_PENT + ), + [_VIA1] = LAYOUT( + _______, _______, _______, + _______, _______, _______, _______, + _______, _______, _______, _______, + _______, _______, _______, _______, + _______, _______, _______, _______ + ), + [_VIA2] = LAYOUT( + _______, _______, _______, + _______, _______, _______, _______, + _______, _______, _______, _______, + _______, _______, _______, _______, + _______, _______, _______, _______ + ), + [_VIA3] = LAYOUT( + _______, _______, _______, + _______, _______, _______, _______, + _______, _______, _______, _______, + _______, _______, _______, _______, + _______, _______, _______, _______ + ) }; +#ifdef ENCODER_MAP_ENABLE +const uint16_t PROGMEM encoder_map[][NUM_ENCODERS][NUM_DIRECTIONS] = { + [0] = { ENCODER_CCW_CW(KC_VOLD, KC_VOLU), ENCODER_CCW_CW(_______, _______), ENCODER_CCW_CW(_______, _______), ENCODER_CCW_CW(_______, _______), }, + [1] = { ENCODER_CCW_CW(_______, _______), ENCODER_CCW_CW(_______, _______), ENCODER_CCW_CW(_______, _______), ENCODER_CCW_CW(_______, _______), }, + [2] = { ENCODER_CCW_CW(_______, _______), ENCODER_CCW_CW(_______, _______), ENCODER_CCW_CW(_______, _______), ENCODER_CCW_CW(_______, _______), }, + [3] = { ENCODER_CCW_CW(_______, _______), ENCODER_CCW_CW(_______, _______), ENCODER_CCW_CW(_______, _______), ENCODER_CCW_CW(_______, _______), }, +}; +#endif diff --git a/keyboards/nullbitsco/tidbit/keymaps/via/rules.mk b/keyboards/nullbitsco/tidbit/keymaps/via/rules.mk index 036bd6d1c3..f1adcab005 100644 --- a/keyboards/nullbitsco/tidbit/keymaps/via/rules.mk +++ b/keyboards/nullbitsco/tidbit/keymaps/via/rules.mk @@ -1 +1,2 @@ -VIA_ENABLE = yes
\ No newline at end of file +VIA_ENABLE = yes +ENCODER_MAP_ENABLE = yes diff --git a/keyboards/nullbitsco/tidbit/tidbit.c b/keyboards/nullbitsco/tidbit/tidbit.c index eea5a5d54c..15bc0f6a7a 100644 --- a/keyboards/nullbitsco/tidbit/tidbit.c +++ b/keyboards/nullbitsco/tidbit/tidbit.c @@ -18,20 +18,6 @@ #include "common/remote_kb.h" #include "common/bitc_led.h" -typedef struct PACKED { - uint8_t r; - uint8_t c; -} encodermap_t; - -// Map encoders to their respective virtual matrix entry -// Allows for encoder control using VIA -const encodermap_t encoder_map[4][2] = { - {{1, 0}, {1, 1}}, // Encoder 1 matrix location - {{2, 0}, {2, 1}}, // Encoder 2 matrix location - {{3, 0}, {3, 1}}, // Encoder 3 matrix location - {{4, 0}, {4, 1}}, // Encoder 4 matrix location -}; - bool numlock_set = false; #ifdef OLED_ENABLE @@ -41,40 +27,40 @@ oled_rotation_t oled_init_kb(oled_rotation_t rotation) { static void render_logo(void) { static const char PROGMEM tidbit_oled[] = { - 0x00, 0x0e, 0x1f, 0x1f, 0x1f, 0x1f, 0x1f, 0x1f, 0x1f, 0x1f, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, - 0x1f, 0x1f, 0x1f, 0x1f, 0x1f, 0x1f, 0x1f, 0x1f, 0x0e, 0x00, 0x00, 0x00, 0xfe, 0xff, 0xff, 0xff, - 0xfe, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xf8, 0xfe, 0xfe, 0xff, 0xff, 0xff, 0x1f, 0x1f, 0x1f, - 0x1f, 0x1f, 0x1f, 0x1f, 0x1f, 0x3e, 0x3e, 0x7e, 0xfc, 0xfc, 0xf8, 0xf0, 0xe0, 0xc0, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0xf8, 0xfe, 0xfe, 0xff, 0xff, 0xff, 0x1f, 0x1f, 0x1f, 0x1f, 0x1f, 0x1f, - 0x1f, 0x1f, 0x3f, 0x7e, 0xfe, 0xfe, 0xfc, 0xf8, 0xe0, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0xfe, 0xff, 0xff, 0xff, 0xfe, 0x00, 0x00, 0x00, 0x0e, 0x1f, 0x1f, 0x1f, 0x1f, 0x1f, 0x1f, 0x1f, - 0x1f, 0xff, 0xff, 0xff, 0xff, 0xff, 0x1f, 0x1f, 0x1f, 0x1f, 0x1f, 0x1f, 0x1f, 0x1f, 0x1e, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xff, 0xff, 0xff, 0xff, - 0xff, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x03, 0xff, 0xff, 0xff, 0xff, 0xfe, 0xc0, - 0x00, 0x00, 0x00, 0x00, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xe0, 0xe0, 0xe0, 0xe0, 0xe0, 0xe0, - 0xe0, 0xf0, 0xf0, 0xf8, 0xff, 0xff, 0xbf, 0x1f, 0x0f, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0xff, 0xff, 0xff, 0xff, 0xff, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0xff, 0xff, 0xff, 0xff, 0xff, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xff, 0xff, 0xff, 0xff, - 0xff, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x80, 0xe0, 0xff, 0xff, 0xff, 0xff, 0x7f, 0x03, - 0x00, 0x00, 0x00, 0x00, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0x03, 0x03, 0x03, 0x03, 0x03, 0x03, - 0x03, 0x03, 0x03, 0x07, 0x07, 0xbf, 0xff, 0xff, 0xff, 0xfe, 0xf0, 0x00, 0x00, 0x00, 0x00, 0x00, - 0xff, 0xff, 0xff, 0xff, 0xff, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0xff, 0xff, 0xff, 0xff, 0xff, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x3f, 0x7f, 0xff, 0xff, 0x7f, 0x3f, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x7f, 0xff, 0xff, 0xff, - 0x7f, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x1f, 0x7f, 0x7f, 0x7f, 0xff, 0xff, 0xf8, 0xf8, 0xf8, - 0xf8, 0xf8, 0xf8, 0x7c, 0x7c, 0x7c, 0x7e, 0x3e, 0x3f, 0x3f, 0x1f, 0x0f, 0x07, 0x01, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x1f, 0x7f, 0x7f, 0x7f, 0xff, 0xff, 0xf8, 0xf8, 0xf8, 0xf8, 0xf8, 0xf8, - 0xf8, 0x7c, 0x7c, 0x7c, 0x7e, 0x3f, 0x3f, 0x1f, 0x1f, 0x07, 0x01, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x7f, 0xff, 0xff, 0x7f, 0x3f, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x0e, 0x1f, 0x1f, 0x1f, 0x1f, 0x1f, 0x1f, 0x1f, 0x1f, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, + 0x1f, 0x1f, 0x1f, 0x1f, 0x1f, 0x1f, 0x1f, 0x1f, 0x0e, 0x00, 0x00, 0x00, 0xfe, 0xff, 0xff, 0xff, + 0xfe, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xf8, 0xfe, 0xfe, 0xff, 0xff, 0xff, 0x1f, 0x1f, 0x1f, + 0x1f, 0x1f, 0x1f, 0x1f, 0x1f, 0x3e, 0x3e, 0x7e, 0xfc, 0xfc, 0xf8, 0xf0, 0xe0, 0xc0, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0xf8, 0xfe, 0xfe, 0xff, 0xff, 0xff, 0x1f, 0x1f, 0x1f, 0x1f, 0x1f, 0x1f, + 0x1f, 0x1f, 0x3f, 0x7e, 0xfe, 0xfe, 0xfc, 0xf8, 0xe0, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0xfe, 0xff, 0xff, 0xff, 0xfe, 0x00, 0x00, 0x00, 0x0e, 0x1f, 0x1f, 0x1f, 0x1f, 0x1f, 0x1f, 0x1f, + 0x1f, 0xff, 0xff, 0xff, 0xff, 0xff, 0x1f, 0x1f, 0x1f, 0x1f, 0x1f, 0x1f, 0x1f, 0x1f, 0x1e, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xff, 0xff, 0xff, 0xff, + 0xff, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x03, 0xff, 0xff, 0xff, 0xff, 0xfe, 0xc0, + 0x00, 0x00, 0x00, 0x00, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xe0, 0xe0, 0xe0, 0xe0, 0xe0, 0xe0, + 0xe0, 0xf0, 0xf0, 0xf8, 0xff, 0xff, 0xbf, 0x1f, 0x0f, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0xff, 0xff, 0xff, 0xff, 0xff, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0xff, 0xff, 0xff, 0xff, 0xff, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xff, 0xff, 0xff, 0xff, + 0xff, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x80, 0xe0, 0xff, 0xff, 0xff, 0xff, 0x7f, 0x03, + 0x00, 0x00, 0x00, 0x00, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0x03, 0x03, 0x03, 0x03, 0x03, 0x03, + 0x03, 0x03, 0x03, 0x07, 0x07, 0xbf, 0xff, 0xff, 0xff, 0xfe, 0xf0, 0x00, 0x00, 0x00, 0x00, 0x00, + 0xff, 0xff, 0xff, 0xff, 0xff, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0xff, 0xff, 0xff, 0xff, 0xff, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x3f, 0x7f, 0xff, 0xff, 0x7f, 0x3f, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x7f, 0xff, 0xff, 0xff, + 0x7f, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x1f, 0x7f, 0x7f, 0x7f, 0xff, 0xff, 0xf8, 0xf8, 0xf8, + 0xf8, 0xf8, 0xf8, 0x7c, 0x7c, 0x7c, 0x7e, 0x3e, 0x3f, 0x3f, 0x1f, 0x0f, 0x07, 0x01, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x1f, 0x7f, 0x7f, 0x7f, 0xff, 0xff, 0xf8, 0xf8, 0xf8, 0xf8, 0xf8, 0xf8, + 0xf8, 0x7c, 0x7c, 0x7c, 0x7e, 0x3f, 0x3f, 0x1f, 0x1f, 0x07, 0x01, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x7f, 0xff, 0xff, 0x7f, 0x3f, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x3f, 0x7f, 0xff, 0xff, 0x7f, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00 }; - + oled_write_raw_P(tidbit_oled, sizeof(tidbit_oled)); }; @@ -86,20 +72,6 @@ bool oled_task_kb(void) { #endif -static void process_encoder_matrix(encodermap_t pos) { - action_exec(MAKE_KEYEVENT(pos.r, pos.c, true)); -#if TAP_CODE_DELAY > 0 - wait_ms(TAP_CODE_DELAY); -#endif - action_exec(MAKE_KEYEVENT(pos.r, pos.c, false)); -} - -bool encoder_update_kb(uint8_t index, bool clockwise) { - if (!encoder_update_user(index, clockwise)) return false; - process_encoder_matrix(encoder_map[index][clockwise ? 0 : 1]); - return false; -} - // Use Bit-C LED to show NUM LOCK status void led_update_ports(led_t led_state) { set_bitc_LED(led_state.num_lock ? LED_DIM : LED_OFF); diff --git a/keyboards/numatreus/config.h b/keyboards/numatreus/config.h index 774687565a..46a94d10c0 100644 --- a/keyboards/numatreus/config.h +++ b/keyboards/numatreus/config.h @@ -19,15 +19,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. /* Locking resynchronize hack */ #define LOCKING_RESYNC_ENABLE -// keyboard RGB LED support -// see ./rules.mk: LED_BACK_ENABLE or LED_UNDERGLOW_ENABLE set yes -#define RGBLED_NUM 6 - -#define RGBLIGHT_VAL_STEP 17 - -#define RGBLIGHT_HUE_STEP 10 -#define RGBLIGHT_SAT_STEP 17 - #if defined(RGBLIGHT_ENABLE) // USB_MAX_POWER_CONSUMPTION value for stonehenge30 keyboard // 120 RGBoff, OLEDoff diff --git a/keyboards/numatreus/info.json b/keyboards/numatreus/info.json index 54f5bde1bd..bdf4a574c6 100644 --- a/keyboards/numatreus/info.json +++ b/keyboards/numatreus/info.json @@ -17,6 +17,8 @@ "pin": "D3" }, "rgblight": { + "hue_steps": 10, + "led_count": 6, "max_brightness": 200 }, "processor": "atmega32u4", diff --git a/keyboards/obosob/arch_36/config.h b/keyboards/obosob/arch_36/config.h index 068a231f43..1b6189b42e 100644 --- a/keyboards/obosob/arch_36/config.h +++ b/keyboards/obosob/arch_36/config.h @@ -17,13 +17,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #pragma once -#ifdef RGBLIGHT_ENABLE -#define RGBLED_SPLIT { 6, 6 } -#define RGBLED_NUM 12 -#define RGBLIGHT_LED_MAP { 0, 1, 2, 3, 4, 5, \ - 11, 10, 9, 8, 7, 6 } -#endif - #define OLED_DISPLAY_128X64 #define EE_HANDS diff --git a/keyboards/obosob/arch_36/info.json b/keyboards/obosob/arch_36/info.json index d978080a2f..464cd01be8 100644 --- a/keyboards/obosob/arch_36/info.json +++ b/keyboards/obosob/arch_36/info.json @@ -16,6 +16,11 @@ "split": { "soft_serial_pin": "D2" }, + "rgblight": { + "led_count": 12, + "led_map": [0, 1, 2, 3, 4, 5, 11, 10, 9, 8, 7, 6], + "split_count": [6, 6] + }, "ws2812": { "pin": "D3" }, diff --git a/keyboards/oddforge/vea/config.h b/keyboards/oddforge/vea/config.h index c2e9c2b6bb..19ff41d44a 100644 --- a/keyboards/oddforge/vea/config.h +++ b/keyboards/oddforge/vea/config.h @@ -26,7 +26,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #define DYNAMIC_KEYMAP_LAYER_COUNT 3 -#define RGBLED_NUM 18 #define RGBLIGHT_EFFECT_BREATHING #define RGBLIGHT_EFFECT_RAINBOW_MOOD #define RGBLIGHT_EFFECT_RAINBOW_SWIRL @@ -37,5 +36,4 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #define RGBLIGHT_EFFECT_RGB_TEST #define RGBLIGHT_EFFECT_ALTERNATING #define RGBLIGHT_EFFECT_TWINKLE -#define RGBLIGHT_SLEEP #define RGBLIGHT_EFFECT_KNIGHT_OFFSET 9 diff --git a/keyboards/oddforge/vea/info.json b/keyboards/oddforge/vea/info.json index d6586a09e8..6cb8ae5f2a 100644 --- a/keyboards/oddforge/vea/info.json +++ b/keyboards/oddforge/vea/info.json @@ -11,6 +11,10 @@ "backlight": { "pin": "D4" }, + "rgblight": { + "led_count": 18, + "sleep": true + }, "ws2812": { "driver": "custom" }, diff --git a/keyboards/ogre/ergo_single/config.h b/keyboards/ogre/ergo_single/config.h index c6739d7f66..facded4a0e 100644 --- a/keyboards/ogre/ergo_single/config.h +++ b/keyboards/ogre/ergo_single/config.h @@ -17,8 +17,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #pragma once -#define RGBLED_NUM 14 -#define RGBLIGHT_LED_MAP { 0, 1, 2, 3, 4, 5, 6, 13, 12,11, 10, 9, 8, 7} #define RGBLIGHT_EFFECT_BREATHING #define RGBLIGHT_EFFECT_RAINBOW_MOOD #define RGBLIGHT_EFFECT_RAINBOW_SWIRL diff --git a/keyboards/ogre/ergo_single/info.json b/keyboards/ogre/ergo_single/info.json index 4a5b96b8ad..1c0346131b 100644 --- a/keyboards/ogre/ergo_single/info.json +++ b/keyboards/ogre/ergo_single/info.json @@ -13,6 +13,10 @@ "rows": ["D3", "D2", "D1", "D0", "D4", "C6", "D7", "E6", "B4", "B5"] }, "diode_direction": "COL2ROW", + "rgblight": { + "led_count": 14, + "led_map": [0, 1, 2, 3, 4, 5, 6, 13, 12, 11, 10, 9, 8, 7] + }, "ws2812": { "pin": "B6" }, diff --git a/keyboards/ogre/ergo_split/config.h b/keyboards/ogre/ergo_split/config.h index 92535947de..d510497b8e 100644 --- a/keyboards/ogre/ergo_split/config.h +++ b/keyboards/ogre/ergo_split/config.h @@ -19,9 +19,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #define SPLIT_HAND_PIN D1 -#define RGBLED_SPLIT { 7, 7 } -#define RGBLED_NUM 14 -#define RGBLIGHT_LED_MAP { 6, 5, 4, 3, 2, 1, 0, 13, 12,11, 10, 9, 8, 7} #define RGBLIGHT_EFFECT_BREATHING #define RGBLIGHT_EFFECT_RAINBOW_MOOD #define RGBLIGHT_EFFECT_RAINBOW_SWIRL diff --git a/keyboards/ogre/ergo_split/info.json b/keyboards/ogre/ergo_split/info.json index 2a1bbbdcd6..7ef564ba28 100644 --- a/keyboards/ogre/ergo_split/info.json +++ b/keyboards/ogre/ergo_split/info.json @@ -16,6 +16,11 @@ "split": { "soft_serial_pin": "D3" }, + "rgblight": { + "led_count": 14, + "led_map": [6, 5, 4, 3, 2, 1, 0, 13, 12, 11, 10, 9, 8, 7], + "split_count": [7, 7] + }, "ws2812": { "pin": "B6" }, diff --git a/keyboards/ok60/config.h b/keyboards/ok60/config.h index f11b35919e..e4668ff374 100644 --- a/keyboards/ok60/config.h +++ b/keyboards/ok60/config.h @@ -33,7 +33,3 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #define RGBLIGHT_EFFECT_RGB_TEST #define RGBLIGHT_EFFECT_ALTERNATING #define RGBLIGHT_EFFECT_TWINKLE -#define RGBLED_NUM 10 -#define RGBLIGHT_HUE_STEP 8 -#define RGBLIGHT_SAT_STEP 8 -#define RGBLIGHT_VAL_STEP 8 diff --git a/keyboards/ok60/info.json b/keyboards/ok60/info.json index a999639739..826e5ef60d 100644 --- a/keyboards/ok60/info.json +++ b/keyboards/ok60/info.json @@ -17,6 +17,11 @@ "pin": "B7", "levels": 5 }, + "rgblight": { + "saturation_steps": 8, + "brightness_steps": 8, + "led_count": 10 + }, "ws2812": { "pin": "F6" }, diff --git a/keyboards/om60/config.h b/keyboards/om60/config.h index 16957f9a0a..5977c819ed 100644 --- a/keyboards/om60/config.h +++ b/keyboards/om60/config.h @@ -34,28 +34,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. /* Locking resynchronize hack */ #define LOCKING_RESYNC_ENABLE -#ifndef RGBLED_NUM - #define RGBLED_NUM 69 - #define RGBLIGHT_LED_MAP { \ - 0, 1, 2, 3, \ - 8, 7, 6, 5, 4, \ - 9,10,11,12,13, \ - 18,17,16,15,14, \ - 19,20,21,22,23, \ - 28,27,26,25,24, \ - 29,30,31,32,33, \ - 38,37,36,35,34, \ - 39,40,41,42,43, \ - 48,47,46,45,44, \ - 49,50,51,52,53, \ - 58,57,56,55,54, \ - 59,60,61,62,63, \ - 68,67,66,65,64 \ - } - - #define RGBLIGHT_SLEEP -#endif - #define RGBLIGHT_EFFECT_BREATHING #define RGBLIGHT_EFFECT_RAINBOW_MOOD #define RGBLIGHT_EFFECT_RAINBOW_SWIRL @@ -74,8 +52,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #define RGBLIGHT_LIMIT_VAL 30 #define RGBLIGHT_VAL_STEP 4 #endif -#define RGBLIGHT_HUE_STEP 10 -#define RGBLIGHT_SAT_STEP 17 #if defined(RGBLIGHT_ENABLE) && !defined(IOS_DEVICE_ENABLE) // USB_MAX_POWER_CONSUMPTION value for naked48 keyboard @@ -90,5 +66,3 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. // iOS device need lessthan 100 #define USB_MAX_POWER_CONSUMPTION 100 #endif - -#define TAP_CODE_DELAY 10 diff --git a/keyboards/om60/info.json b/keyboards/om60/info.json index 7efa8097d6..9d33fbe1c2 100644 --- a/keyboards/om60/info.json +++ b/keyboards/om60/info.json @@ -13,6 +13,15 @@ {"pin_a": "B4", "pin_b": "B5"} ] }, + "qmk": { + "tap_keycode_delay": 10 + }, + "rgblight": { + "hue_steps": 10, + "led_count": 69, + "sleep": true, + "led_map": [0, 1, 2, 3, 8, 7, 6, 5, 4, 9, 10, 11, 12, 13, 18, 17, 16, 15, 14, 19, 20, 21, 22, 23, 28, 27, 26, 25, 24, 29, 30, 31, 32, 33, 38, 37, 36, 35, 34, 39, 40, 41, 42, 43, 48, 47, 46, 45, 44, 49, 50, 51, 52, 53, 58, 57, 56, 55, 54, 59, 60, 61, 62, 63, 68, 67, 66, 65, 64] + }, "ws2812": { "pin": "D3" }, diff --git a/keyboards/omkbd/ergodash/mini/config.h b/keyboards/omkbd/ergodash/mini/config.h index c66f9ef044..42c07ce4ac 100644 --- a/keyboards/omkbd/ergodash/mini/config.h +++ b/keyboards/omkbd/ergodash/mini/config.h @@ -18,9 +18,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #pragma once -/* define tapping term */ -#define TAPPING_TERM 120 - #define AUDIO_PIN C6 /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ @@ -39,9 +36,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #define RGBLIGHT_EFFECT_RGB_TEST #define RGBLIGHT_EFFECT_ALTERNATING #define RGBLIGHT_EFFECT_TWINKLE -#define RGBLED_NUM 20 -#define RGBLIGHT_SPLIT -#define RGBLED_SPLIT { 10, 10 } // Number of LEDs #define SELECT_SOFT_SERIAL_SPEED 1 /*Sets the protocol speed when using serial communication*/ diff --git a/keyboards/omkbd/ergodash/mini/info.json b/keyboards/omkbd/ergodash/mini/info.json index 0c62ef58fd..91e73a97a8 100644 --- a/keyboards/omkbd/ergodash/mini/info.json +++ b/keyboards/omkbd/ergodash/mini/info.json @@ -20,6 +20,13 @@ "split": { "soft_serial_pin": "D0" }, + "tapping": { + "term": 120 + }, + "rgblight": { + "led_count": 20, + "split_count": [10, 10] + }, "ws2812": { "pin": "D3" }, diff --git a/keyboards/omkbd/ergodash/rev1/config.h b/keyboards/omkbd/ergodash/rev1/config.h index 03eea39fd6..42c07ce4ac 100644 --- a/keyboards/omkbd/ergodash/rev1/config.h +++ b/keyboards/omkbd/ergodash/rev1/config.h @@ -18,9 +18,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #pragma once -/* define tapping term */ -#define TAPPING_TERM 120 - #define AUDIO_PIN C6 /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ @@ -39,13 +36,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #define RGBLIGHT_EFFECT_RGB_TEST #define RGBLIGHT_EFFECT_ALTERNATING #define RGBLIGHT_EFFECT_TWINKLE -#define RGBLED_NUM 24 -#define RGBLIGHT_SPLIT -#define RGBLED_SPLIT { 12, 12 } // Number of LEDs - -// The LEDs on the slave half go in reverse order -#define RGBLIGHT_LED_MAP { 0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, \ - 23, 22, 21, 20, 19, 18, 17, 16, 15, 14, 13, 12} #define SELECT_SOFT_SERIAL_SPEED 1 /*Sets the protocol speed when using serial communication*/ diff --git a/keyboards/omkbd/ergodash/rev1/info.json b/keyboards/omkbd/ergodash/rev1/info.json index 1ec059bd82..d34d4f79b1 100644 --- a/keyboards/omkbd/ergodash/rev1/info.json +++ b/keyboards/omkbd/ergodash/rev1/info.json @@ -20,6 +20,14 @@ "split": { "soft_serial_pin": "D0" }, + "tapping": { + "term": 120 + }, + "rgblight": { + "led_count": 24, + "led_map": [0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 23, 22, 21, 20, 19, 18, 17, 16, 15, 14, 13, 12], + "split_count": [12, 12] + }, "ws2812": { "pin": "D3" }, diff --git a/keyboards/omkbd/runner3680/3x6/config.h b/keyboards/omkbd/runner3680/3x6/config.h index d2cd91cbc5..127483886e 100644 --- a/keyboards/omkbd/runner3680/3x6/config.h +++ b/keyboards/omkbd/runner3680/3x6/config.h @@ -16,9 +16,6 @@ #pragma once -/* define tapping term */ -#define TAPPING_TERM 120 - /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ #define LOCKING_SUPPORT_ENABLE /* Locking resynchronize hack */ @@ -35,9 +32,6 @@ #define RGBLIGHT_EFFECT_RGB_TEST #define RGBLIGHT_EFFECT_ALTERNATING #define RGBLIGHT_EFFECT_TWINKLE -#define RGBLED_NUM 36 -#define RGBLIGHT_SPLIT -#define RGBLED_SPLIT { 18, 18 } // Number of LEDs #define SELECT_SOFT_SERIAL_SPEED 1 /*Sets the protocol speed when using serial communication*/ diff --git a/keyboards/omkbd/runner3680/3x6/info.json b/keyboards/omkbd/runner3680/3x6/info.json index c197f04207..d8217108be 100644 --- a/keyboards/omkbd/runner3680/3x6/info.json +++ b/keyboards/omkbd/runner3680/3x6/info.json @@ -16,11 +16,16 @@ "split": { "soft_serial_pin": "D2" }, + "tapping": { + "term": 120 + }, "ws2812": { "pin": "D3" }, "rgblight": { - "max_brightness": 100 + "led_count": 36, + "max_brightness": 100, + "split_count": [18, 18] }, "layouts": { "LAYOUT": { diff --git a/keyboards/omkbd/runner3680/3x7/config.h b/keyboards/omkbd/runner3680/3x7/config.h index b8c601b564..127483886e 100644 --- a/keyboards/omkbd/runner3680/3x7/config.h +++ b/keyboards/omkbd/runner3680/3x7/config.h @@ -16,9 +16,6 @@ #pragma once -/* define tapping term */ -#define TAPPING_TERM 120 - /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ #define LOCKING_SUPPORT_ENABLE /* Locking resynchronize hack */ @@ -35,9 +32,6 @@ #define RGBLIGHT_EFFECT_RGB_TEST #define RGBLIGHT_EFFECT_ALTERNATING #define RGBLIGHT_EFFECT_TWINKLE -#define RGBLED_NUM 42 -#define RGBLIGHT_SPLIT -#define RGBLED_SPLIT { 21, 21 } // Number of LEDs #define SELECT_SOFT_SERIAL_SPEED 1 /*Sets the protocol speed when using serial communication*/ diff --git a/keyboards/omkbd/runner3680/3x7/info.json b/keyboards/omkbd/runner3680/3x7/info.json index 458fab653c..ef025ccdf0 100644 --- a/keyboards/omkbd/runner3680/3x7/info.json +++ b/keyboards/omkbd/runner3680/3x7/info.json @@ -16,11 +16,16 @@ "split": { "soft_serial_pin": "D2" }, + "tapping": { + "term": 120 + }, "ws2812": { "pin": "D3" }, "rgblight": { - "max_brightness": 100 + "led_count": 42, + "max_brightness": 100, + "split_count": [21, 21] }, "layouts": { "LAYOUT": { diff --git a/keyboards/omkbd/runner3680/3x8/config.h b/keyboards/omkbd/runner3680/3x8/config.h index 3a273e8bb9..127483886e 100644 --- a/keyboards/omkbd/runner3680/3x8/config.h +++ b/keyboards/omkbd/runner3680/3x8/config.h @@ -16,9 +16,6 @@ #pragma once -/* define tapping term */ -#define TAPPING_TERM 120 - /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ #define LOCKING_SUPPORT_ENABLE /* Locking resynchronize hack */ @@ -35,9 +32,6 @@ #define RGBLIGHT_EFFECT_RGB_TEST #define RGBLIGHT_EFFECT_ALTERNATING #define RGBLIGHT_EFFECT_TWINKLE -#define RGBLED_NUM 48 -#define RGBLIGHT_SPLIT -#define RGBLED_SPLIT { 24, 24 } // Number of LEDs #define SELECT_SOFT_SERIAL_SPEED 1 /*Sets the protocol speed when using serial communication*/ diff --git a/keyboards/omkbd/runner3680/3x8/info.json b/keyboards/omkbd/runner3680/3x8/info.json index 33fcc3228f..e360b1de48 100644 --- a/keyboards/omkbd/runner3680/3x8/info.json +++ b/keyboards/omkbd/runner3680/3x8/info.json @@ -16,11 +16,16 @@ "split": { "soft_serial_pin": "D2" }, + "tapping": { + "term": 120 + }, "ws2812": { "pin": "D3" }, "rgblight": { - "max_brightness": 100 + "led_count": 48, + "max_brightness": 100, + "split_count": [24, 24] }, "layouts": { "LAYOUT": { diff --git a/keyboards/omkbd/runner3680/4x6/config.h b/keyboards/omkbd/runner3680/4x6/config.h index 3a273e8bb9..127483886e 100644 --- a/keyboards/omkbd/runner3680/4x6/config.h +++ b/keyboards/omkbd/runner3680/4x6/config.h @@ -16,9 +16,6 @@ #pragma once -/* define tapping term */ -#define TAPPING_TERM 120 - /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ #define LOCKING_SUPPORT_ENABLE /* Locking resynchronize hack */ @@ -35,9 +32,6 @@ #define RGBLIGHT_EFFECT_RGB_TEST #define RGBLIGHT_EFFECT_ALTERNATING #define RGBLIGHT_EFFECT_TWINKLE -#define RGBLED_NUM 48 -#define RGBLIGHT_SPLIT -#define RGBLED_SPLIT { 24, 24 } // Number of LEDs #define SELECT_SOFT_SERIAL_SPEED 1 /*Sets the protocol speed when using serial communication*/ diff --git a/keyboards/omkbd/runner3680/4x6/info.json b/keyboards/omkbd/runner3680/4x6/info.json index 2e6eda2a2e..c052c6891c 100644 --- a/keyboards/omkbd/runner3680/4x6/info.json +++ b/keyboards/omkbd/runner3680/4x6/info.json @@ -16,11 +16,16 @@ "split": { "soft_serial_pin": "D2" }, + "tapping": { + "term": 120 + }, "ws2812": { "pin": "D3" }, "rgblight": { - "max_brightness": 100 + "led_count": 48, + "max_brightness": 100, + "split_count": [24, 24] }, "layouts": { "LAYOUT": { diff --git a/keyboards/omkbd/runner3680/4x7/config.h b/keyboards/omkbd/runner3680/4x7/config.h index f6b5dcf145..127483886e 100644 --- a/keyboards/omkbd/runner3680/4x7/config.h +++ b/keyboards/omkbd/runner3680/4x7/config.h @@ -16,9 +16,6 @@ #pragma once -/* define tapping term */ -#define TAPPING_TERM 120 - /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ #define LOCKING_SUPPORT_ENABLE /* Locking resynchronize hack */ @@ -35,9 +32,6 @@ #define RGBLIGHT_EFFECT_RGB_TEST #define RGBLIGHT_EFFECT_ALTERNATING #define RGBLIGHT_EFFECT_TWINKLE -#define RGBLED_NUM 56 -#define RGBLIGHT_SPLIT -#define RGBLED_SPLIT { 28, 28 } // Number of LEDs #define SELECT_SOFT_SERIAL_SPEED 1 /*Sets the protocol speed when using serial communication*/ diff --git a/keyboards/omkbd/runner3680/4x7/info.json b/keyboards/omkbd/runner3680/4x7/info.json index af1a4375d6..dc445a7a4f 100644 --- a/keyboards/omkbd/runner3680/4x7/info.json +++ b/keyboards/omkbd/runner3680/4x7/info.json @@ -16,11 +16,16 @@ "split": { "soft_serial_pin": "D2" }, + "tapping": { + "term": 120 + }, "ws2812": { "pin": "D3" }, "rgblight": { - "max_brightness": 100 + "led_count": 56, + "max_brightness": 100, + "split_count": [28, 28] }, "layouts": { "LAYOUT": { diff --git a/keyboards/omkbd/runner3680/4x8/config.h b/keyboards/omkbd/runner3680/4x8/config.h index 9a53d19688..127483886e 100644 --- a/keyboards/omkbd/runner3680/4x8/config.h +++ b/keyboards/omkbd/runner3680/4x8/config.h @@ -16,9 +16,6 @@ #pragma once -/* define tapping term */ -#define TAPPING_TERM 120 - /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ #define LOCKING_SUPPORT_ENABLE /* Locking resynchronize hack */ @@ -35,9 +32,6 @@ #define RGBLIGHT_EFFECT_RGB_TEST #define RGBLIGHT_EFFECT_ALTERNATING #define RGBLIGHT_EFFECT_TWINKLE -#define RGBLED_NUM 64 -#define RGBLIGHT_SPLIT -#define RGBLED_SPLIT { 32, 32 } // Number of LEDs #define SELECT_SOFT_SERIAL_SPEED 1 /*Sets the protocol speed when using serial communication*/ diff --git a/keyboards/omkbd/runner3680/4x8/info.json b/keyboards/omkbd/runner3680/4x8/info.json index 88dc1455ce..1ac4ca08a7 100644 --- a/keyboards/omkbd/runner3680/4x8/info.json +++ b/keyboards/omkbd/runner3680/4x8/info.json @@ -16,11 +16,16 @@ "split": { "soft_serial_pin": "D2" }, + "tapping": { + "term": 120 + }, "ws2812": { "pin": "D3" }, "rgblight": { - "max_brightness": 100 + "led_count": 64, + "max_brightness": 100, + "split_count": [32, 32] }, "layouts": { "LAYOUT": { diff --git a/keyboards/omkbd/runner3680/5x6/config.h b/keyboards/omkbd/runner3680/5x6/config.h index 52626f1de3..127483886e 100644 --- a/keyboards/omkbd/runner3680/5x6/config.h +++ b/keyboards/omkbd/runner3680/5x6/config.h @@ -16,9 +16,6 @@ #pragma once -/* define tapping term */ -#define TAPPING_TERM 120 - /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ #define LOCKING_SUPPORT_ENABLE /* Locking resynchronize hack */ @@ -35,9 +32,6 @@ #define RGBLIGHT_EFFECT_RGB_TEST #define RGBLIGHT_EFFECT_ALTERNATING #define RGBLIGHT_EFFECT_TWINKLE -#define RGBLED_NUM 60 -#define RGBLIGHT_SPLIT -#define RGBLED_SPLIT { 30, 30 } // Number of LEDs #define SELECT_SOFT_SERIAL_SPEED 1 /*Sets the protocol speed when using serial communication*/ diff --git a/keyboards/omkbd/runner3680/5x6/info.json b/keyboards/omkbd/runner3680/5x6/info.json index 08c4950b80..a93571c981 100644 --- a/keyboards/omkbd/runner3680/5x6/info.json +++ b/keyboards/omkbd/runner3680/5x6/info.json @@ -16,11 +16,16 @@ "split": { "soft_serial_pin": "D2" }, + "tapping": { + "term": 120 + }, "ws2812": { "pin": "D3" }, "rgblight": { - "max_brightness": 100 + "led_count": 60, + "max_brightness": 100, + "split_count": [30, 30] }, "layouts": { "LAYOUT": { diff --git a/keyboards/omkbd/runner3680/5x6_5x8/config.h b/keyboards/omkbd/runner3680/5x6_5x8/config.h index 33f41e5289..c360e27e42 100644 --- a/keyboards/omkbd/runner3680/5x6_5x8/config.h +++ b/keyboards/omkbd/runner3680/5x6_5x8/config.h @@ -16,9 +16,6 @@ #pragma once -/* define tapping term */ -#define TAPPING_TERM 120 - /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ #define LOCKING_SUPPORT_ENABLE /* Locking resynchronize hack */ @@ -36,9 +33,6 @@ #define RGBLIGHT_EFFECT_RGB_TEST #define RGBLIGHT_EFFECT_ALTERNATING #define RGBLIGHT_EFFECT_TWINKLE -#define RGBLED_NUM 70 -#define RGBLIGHT_SPLIT -#define RGBLED_SPLIT { 30, 40 } // Number of LEDs #endif #ifdef RGB_MATRIX_ENABLE #define RGB_MATRIX_LED_COUNT 70 diff --git a/keyboards/omkbd/runner3680/5x6_5x8/info.json b/keyboards/omkbd/runner3680/5x6_5x8/info.json index 8b1b7054a5..19430d76c9 100644 --- a/keyboards/omkbd/runner3680/5x6_5x8/info.json +++ b/keyboards/omkbd/runner3680/5x6_5x8/info.json @@ -19,11 +19,16 @@ "split": { "soft_serial_pin": "D2" }, + "tapping": { + "term": 120 + }, "ws2812": { "pin": "D3" }, "rgblight": { - "max_brightness": 100 + "led_count": 70, + "max_brightness": 100, + "split_count": [30, 40] }, "layouts": { "LAYOUT": { diff --git a/keyboards/omkbd/runner3680/5x7/config.h b/keyboards/omkbd/runner3680/5x7/config.h index 7b60494fcb..127483886e 100644 --- a/keyboards/omkbd/runner3680/5x7/config.h +++ b/keyboards/omkbd/runner3680/5x7/config.h @@ -16,9 +16,6 @@ #pragma once -/* define tapping term */ -#define TAPPING_TERM 120 - /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ #define LOCKING_SUPPORT_ENABLE /* Locking resynchronize hack */ @@ -35,9 +32,6 @@ #define RGBLIGHT_EFFECT_RGB_TEST #define RGBLIGHT_EFFECT_ALTERNATING #define RGBLIGHT_EFFECT_TWINKLE -#define RGBLED_NUM 70 -#define RGBLIGHT_SPLIT -#define RGBLED_SPLIT { 35, 35 } // Number of LEDs #define SELECT_SOFT_SERIAL_SPEED 1 /*Sets the protocol speed when using serial communication*/ diff --git a/keyboards/omkbd/runner3680/5x7/info.json b/keyboards/omkbd/runner3680/5x7/info.json index 0c0c8670f2..1b2240948c 100644 --- a/keyboards/omkbd/runner3680/5x7/info.json +++ b/keyboards/omkbd/runner3680/5x7/info.json @@ -16,11 +16,16 @@ "split": { "soft_serial_pin": "D2" }, + "tapping": { + "term": 120 + }, "ws2812": { "pin": "D3" }, "rgblight": { - "max_brightness": 100 + "led_count": 70, + "max_brightness": 100, + "split_count": [35, 35] }, "layouts": { "LAYOUT": { diff --git a/keyboards/omkbd/runner3680/5x8/config.h b/keyboards/omkbd/runner3680/5x8/config.h index 55d8ae5c97..127483886e 100644 --- a/keyboards/omkbd/runner3680/5x8/config.h +++ b/keyboards/omkbd/runner3680/5x8/config.h @@ -16,9 +16,6 @@ #pragma once -/* define tapping term */ -#define TAPPING_TERM 120 - /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ #define LOCKING_SUPPORT_ENABLE /* Locking resynchronize hack */ @@ -35,9 +32,6 @@ #define RGBLIGHT_EFFECT_RGB_TEST #define RGBLIGHT_EFFECT_ALTERNATING #define RGBLIGHT_EFFECT_TWINKLE -#define RGBLED_NUM 80 -#define RGBLIGHT_SPLIT -#define RGBLED_SPLIT { 40, 40 } // Number of LEDs #define SELECT_SOFT_SERIAL_SPEED 1 /*Sets the protocol speed when using serial communication*/ diff --git a/keyboards/omkbd/runner3680/5x8/info.json b/keyboards/omkbd/runner3680/5x8/info.json index 41e95e583a..a957352e5e 100644 --- a/keyboards/omkbd/runner3680/5x8/info.json +++ b/keyboards/omkbd/runner3680/5x8/info.json @@ -16,11 +16,16 @@ "split": { "soft_serial_pin": "D2" }, + "tapping": { + "term": 120 + }, "ws2812": { "pin": "D3" }, "rgblight": { - "max_brightness": 100 + "led_count": 80, + "max_brightness": 100, + "split_count": [40, 40] }, "layouts": { "LAYOUT": { diff --git a/keyboards/orange75/keymaps/default/keymap.c b/keyboards/orange75/keymaps/default/keymap.c index c79fc918d0..d6b585145d 100644 --- a/keyboards/orange75/keymaps/default/keymap.c +++ b/keyboards/orange75/keymaps/default/keymap.c @@ -52,9 +52,9 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { ) }; -void led_set_user(uint8_t usb_led) { +bool led_update_user(led_t led_state) { - if (usb_led & (1 << USB_LED_NUM_LOCK)) { + if (led_state.num_lock) { setPinOutput(B0); writePinLow(B0); } else { @@ -62,7 +62,7 @@ void led_set_user(uint8_t usb_led) { writePinLow(B0); } - if (usb_led & (1 << USB_LED_CAPS_LOCK)) { + if (led_state.caps_lock) { setPinOutput(B1); writePinLow(B1); } else { @@ -70,11 +70,12 @@ void led_set_user(uint8_t usb_led) { writePinLow(B1); } - if (usb_led & (1 << USB_LED_SCROLL_LOCK)) { + if (led_state.scroll_lock) { setPinOutput(B2); writePinLow(B2); } else { setPinInput(B2); writePinLow(B2); } + return false; } diff --git a/keyboards/org60/config.h b/keyboards/org60/config.h index e2b275251d..3980b2fb71 100644 --- a/keyboards/org60/config.h +++ b/keyboards/org60/config.h @@ -29,14 +29,8 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #define RGBLIGHT_EFFECT_RGB_TEST #define RGBLIGHT_EFFECT_ALTERNATING #define RGBLIGHT_EFFECT_TWINKLE -#define RGBLED_NUM 20 // Number of LEDs -#define RGBLIGHT_HUE_STEP 10 -#define RGBLIGHT_SAT_STEP 17 -#define RGBLIGHT_VAL_STEP 17 /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ #define LOCKING_SUPPORT_ENABLE /* Locking resynchronize hack */ #define LOCKING_RESYNC_ENABLE - -#define TAPPING_TERM 200 diff --git a/keyboards/org60/info.json b/keyboards/org60/info.json index 7ceeef8312..bc922012f0 100644 --- a/keyboards/org60/info.json +++ b/keyboards/org60/info.json @@ -17,6 +17,10 @@ "pin": "F5", "levels": 6 }, + "rgblight": { + "hue_steps": 10, + "led_count": 20 + }, "ws2812": { "pin": "F6" }, diff --git a/keyboards/orthocode/config.h b/keyboards/orthocode/config.h index 38098991fe..f552f0f6db 100644 --- a/keyboards/orthocode/config.h +++ b/keyboards/orthocode/config.h @@ -16,13 +16,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #pragma once -#define TAP_CODE_DELAY 10 - - #define RGBLED_NUM 10 /*Change for the number of leds on the strip you attach*/ - #define RGBLIGHT_HUE_STEP 8 - #define RGBLIGHT_SAT_STEP 8 - #define RGBLIGHT_VAL_STEP 8 - #define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */ #define RGBLIGHT_EFFECT_BREATHING #define RGBLIGHT_EFFECT_RAINBOW_MOOD #define RGBLIGHT_EFFECT_RAINBOW_SWIRL diff --git a/keyboards/orthocode/info.json b/keyboards/orthocode/info.json index 6b283da6cf..49ea47835b 100644 --- a/keyboards/orthocode/info.json +++ b/keyboards/orthocode/info.json @@ -19,6 +19,15 @@ {"pin_a": "D1", "pin_b": "D0", "resolution": 1} ] }, + "qmk": { + "tap_keycode_delay": 10 + }, + "rgblight": { + "saturation_steps": 8, + "brightness_steps": 8, + "led_count": 10, + "sleep": true + }, "ws2812": { "pin": "D5" }, diff --git a/keyboards/owlab/jelly_epoch/hotswap/config.h b/keyboards/owlab/jelly_epoch/hotswap/config.h index b40244be73..0049e447f9 100644 --- a/keyboards/owlab/jelly_epoch/hotswap/config.h +++ b/keyboards/owlab/jelly_epoch/hotswap/config.h @@ -27,7 +27,3 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. # define RGBLIGHT_EFFECT_SNAKE # define RGBLIGHT_EFFECT_STATIC_GRADIENT # define RGBLIGHT_EFFECT_TWINKLE -# define RGBLED_NUM 24 -# define RGBLIGHT_HUE_STEP 8 -# define RGBLIGHT_SAT_STEP 8 -# define RGBLIGHT_VAL_STEP 10 diff --git a/keyboards/owlab/jelly_epoch/hotswap/info.json b/keyboards/owlab/jelly_epoch/hotswap/info.json index c30c06fb67..b27023fcf4 100644 --- a/keyboards/owlab/jelly_epoch/hotswap/info.json +++ b/keyboards/owlab/jelly_epoch/hotswap/info.json @@ -14,6 +14,11 @@ "rows": ["B0", "B1", "B2", "B3", "A15", "B10"] }, "diode_direction": "COL2ROW", + "rgblight": { + "saturation_steps": 8, + "brightness_steps": 10, + "led_count": 24 + }, "ws2812": { "pin": "B15" }, diff --git a/keyboards/owlab/jelly_epoch/soldered/config.h b/keyboards/owlab/jelly_epoch/soldered/config.h index b40244be73..0049e447f9 100644 --- a/keyboards/owlab/jelly_epoch/soldered/config.h +++ b/keyboards/owlab/jelly_epoch/soldered/config.h @@ -27,7 +27,3 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. # define RGBLIGHT_EFFECT_SNAKE # define RGBLIGHT_EFFECT_STATIC_GRADIENT # define RGBLIGHT_EFFECT_TWINKLE -# define RGBLED_NUM 24 -# define RGBLIGHT_HUE_STEP 8 -# define RGBLIGHT_SAT_STEP 8 -# define RGBLIGHT_VAL_STEP 10 diff --git a/keyboards/owlab/jelly_epoch/soldered/info.json b/keyboards/owlab/jelly_epoch/soldered/info.json index 4c66855d6b..a1d079ce2b 100644 --- a/keyboards/owlab/jelly_epoch/soldered/info.json +++ b/keyboards/owlab/jelly_epoch/soldered/info.json @@ -14,6 +14,11 @@ "rows": ["B0", "B1", "B2", "B3", "A15", "B10"] }, "diode_direction": "COL2ROW", + "rgblight": { + "saturation_steps": 8, + "brightness_steps": 10, + "led_count": 24 + }, "ws2812": { "pin": "B15" }, diff --git a/keyboards/owlab/spring/config.h b/keyboards/owlab/spring/config.h index 15d1e18d0b..2b727f29a0 100644 --- a/keyboards/owlab/spring/config.h +++ b/keyboards/owlab/spring/config.h @@ -28,9 +28,5 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. # define RGBLIGHT_EFFECT_RGB_TEST # define RGBLIGHT_EFFECT_ALTERNATING # define RGBLIGHT_EFFECT_TWINKLE -# define RGBLED_NUM 8 -# define RGBLIGHT_HUE_STEP 8 -# define RGBLIGHT_SAT_STEP 8 -# define RGBLIGHT_VAL_STEP 10 # define RGBLIGHT_DEFAULT_MODE RGBLIGHT_MODE_RAINBOW_SWIRL # define RGBLIGHT_DEFAULT_VAL 127 diff --git a/keyboards/owlab/spring/info.json b/keyboards/owlab/spring/info.json index cdf5143061..df71a94100 100644 --- a/keyboards/owlab/spring/info.json +++ b/keyboards/owlab/spring/info.json @@ -14,6 +14,11 @@ "rows": ["B0", "B7", "D0", "D1", "D2"] }, "diode_direction": "COL2ROW", + "rgblight": { + "saturation_steps": 8, + "brightness_steps": 10, + "led_count": 8 + }, "ws2812": { "pin": "D3" }, diff --git a/keyboards/owlab/spring/spring.c b/keyboards/owlab/spring/spring.c index 8088fb03c2..13280ff9b3 100644 --- a/keyboards/owlab/spring/spring.c +++ b/keyboards/owlab/spring/spring.c @@ -108,7 +108,7 @@ bool process_record_kb(uint16_t keycode, keyrecord_t *record) { case KC_CAPS: - if(IS_LED_ON(host_keyboard_leds(), USB_LED_CAPS_LOCK)){ + if(host_keyboard_led_state().caps_lock){ caps_mode_index = CAPS_MODE_LOWER; } else{ caps_mode_index = CAPS_MODE_UPPER; diff --git a/keyboards/owlab/voice65/hotswap/config.h b/keyboards/owlab/voice65/hotswap/config.h index 17222658f3..89e5bf4345 100644 --- a/keyboards/owlab/voice65/hotswap/config.h +++ b/keyboards/owlab/voice65/hotswap/config.h @@ -27,10 +27,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. # define RGBLIGHT_EFFECT_SNAKE # define RGBLIGHT_EFFECT_STATIC_GRADIENT # define RGBLIGHT_EFFECT_TWINKLE -# define RGBLED_NUM 20 -# define RGBLIGHT_HUE_STEP 8 -# define RGBLIGHT_SAT_STEP 8 -# define RGBLIGHT_VAL_STEP 10 # define OWL_VOLUME_RANGE 50 /* RGB matrix */ @@ -95,5 +91,3 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. # define ENABLE_RGB_MATRIX_SOLID_SPLASH # define ENABLE_RGB_MATRIX_SOLID_MULTISPLASH #endif - -#define TAP_CODE_DELAY 10 diff --git a/keyboards/owlab/voice65/hotswap/hotswap.c b/keyboards/owlab/voice65/hotswap/hotswap.c index 57a216f30a..65c0ee7eed 100644 --- a/keyboards/owlab/voice65/hotswap/hotswap.c +++ b/keyboards/owlab/voice65/hotswap/hotswap.c @@ -14,7 +14,7 @@ * along with this program. If not, see <http://www.gnu.org/licenses/>. */ -#include "hotswap.h" +#include "quantum.h" #ifdef RGB_MATRIX_ENABLE const is31_led g_is31_leds[RGB_MATRIX_LED_COUNT] = { @@ -122,329 +122,3 @@ bool rgb_matrix_indicators_kb(void) { } return true; } - -enum encoder_modes{ - ENCODER_MODE_ONE, - ENCODER_MODE_TWO, - ENCODER_MODE_THREE -}; - -keyboard_config_t keyboard_config; -rgblight_config_t rgblight_config; - -uint8_t pre_hue, pre_sat, pre_val; -uint8_t previous_rgb_mode = 0; -uint8_t dir_hue, dir_sat; - -bool encoder_in = false; -uint32_t encoder_timer; - -bool encoder_ani_start= false; -uint32_t encoder_ani_timer = 0; - -bool encoder_direction_start = false; -uint32_t encoder_direction_timer = 0; - - -bool lizm_restart_snake = false; -void rgblight_snake_restart(uint8_t hue, uint8_t sat, uint8_t val){ - lizm_restart_snake = true; // restart signal to local each effect - rgblight_config.hue = hue; - rgblight_config.sat = sat; - rgblight_config.val = val; -} - - -void keyboard_post_init_kb(void){ - keyboard_config.raw = eeconfig_read_kb(); - if( keyboard_config.encoder_mode_index > ENCODER_MODE_THREE ){ - keyboard_config.encoder_mode_index = ENCODER_MODE_ONE; - eeconfig_update_kb(keyboard_config.raw); - } -} - -void switch_encoder_mode(uint8_t mode){ - switch(mode){ - case ENCODER_MODE_ONE: - dir_hue = 88; - dir_sat = 255; - break; - - case ENCODER_MODE_TWO: - dir_hue = 0; - dir_sat = 240; - break; - - case ENCODER_MODE_THREE: - dir_hue = 176; - dir_sat = 255; - break; - } - rgblight_sethsv_noeeprom(dir_hue,dir_sat,pre_val); -} - - -void init_encoder_mode(uint8_t mode){ - previous_rgb_mode = rgblight_get_mode(); - pre_hue = rgblight_get_hue(); - pre_sat = rgblight_get_sat(); - pre_val = rgblight_get_val(); - encoder_in = true; - - rgblight_mode_noeeprom(RGBLIGHT_MODE_STATIC_LIGHT); - - switch_encoder_mode(mode); -} - - -void set_encoder_mode(uint8_t mode){ - if(encoder_in == false){ - init_encoder_mode(mode); - }else{ - switch_encoder_mode(mode); - } - eeconfig_update_kb(keyboard_config.raw); - encoder_timer = timer_read32(); -} - -bool process_record_kb(uint16_t keycode, keyrecord_t *record) { - if (record->event.pressed) { - switch(keycode) { - case RGB_MOD: - case RGB_RMOD: - case RGB_HUI: - case RGB_HUD: - case RGB_SAI: - case RGB_SAD: - case RGB_VAI: - case RGB_VAD: - - if(encoder_in){ - return false; - } - break; - - case KC_F13: - rgb_matrix_toggle(); - break; - - case KC_F14: - rgb_matrix_step(); - break; - - case KC_F15: - rgb_matrix_step_reverse(); - break; - - case KC_F16: - rgb_matrix_increase_hue(); //Increase the hue for effect range LEDs - break; - - case KC_F17: - rgb_matrix_decrease_hue(); //Decrease the hue for effect range LEDs - break; - - case KC_F18: - rgb_matrix_increase_sat(); //Increase the saturation for effect range LEDs - break; - - case KC_F19: - rgb_matrix_decrease_sat(); //Decrease the saturation for effect range LEDs - break; - - case KC_F20: - rgb_matrix_increase_val(); //Increase the value for effect range LEDs - break; - - case KC_F21: - rgb_matrix_decrease_val();//Decrease the value for effect range LEDs - break; - - case KC_F22: //change encoder mode upward - if(!encoder_direction_start){ - if(keyboard_config.encoder_mode_index < ENCODER_MODE_THREE){ - keyboard_config.encoder_mode_index++; - } - else{ - keyboard_config.encoder_mode_index = ENCODER_MODE_ONE; - } - set_encoder_mode(keyboard_config.encoder_mode_index); - } - return false; - case KC_F23: - if(!encoder_direction_start){ - if(keyboard_config.encoder_mode_index > ENCODER_MODE_ONE){ - keyboard_config.encoder_mode_index--; - } - else{ - keyboard_config.encoder_mode_index = ENCODER_MODE_THREE; - } - set_encoder_mode(keyboard_config.encoder_mode_index); - } - return false; - - default: - break; - } - } - return process_record_user(keycode, record); -} - - -void matrix_scan_kb(void) { - if(encoder_in){ - if(timer_elapsed32(encoder_timer) > 5000){ - rgblight_mode(previous_rgb_mode); - rgblight_sethsv(pre_hue, pre_sat, pre_val); - encoder_in = false; - } - } - - if(encoder_ani_start){ - if(timer_elapsed32(encoder_ani_timer) > VOLUME_ANIMATION_TIMER){ - encoder_ani_start = false; - rgblight_sethsv_noeeprom(0,0,0); - } - } - - if(encoder_direction_start){ - if(timer_elapsed32(encoder_direction_timer) > (VOLUME_ANIMATION_TIMER+1500)){ - rgblight_mode_noeeprom(RGBLIGHT_MODE_STATIC_LIGHT); - rgblight_sethsv_noeeprom(dir_hue, dir_sat, pre_val); - encoder_direction_start = false; - } - } - matrix_scan_user(); -} - - -void set_volume_animation(bool increase){ - if(!encoder_ani_start){ - rgblight_snake_restart(dir_hue, dir_sat, pre_val); - } - - if(increase){ - rgblight_mode_noeeprom(17); - } else { - rgblight_mode_noeeprom(18); - } - - encoder_ani_timer = timer_read32(); - encoder_direction_timer = encoder_ani_timer; - encoder_ani_start = true; - encoder_direction_start = true; -} - - -bool encoder_update_kb(uint8_t index, bool clockwise) { - uint8_t layer_now = keyboard_config.encoder_mode_index +1; - uint16_t encoder_cw_keycode = keymap_key_to_keycode(layer_now, (keypos_t){.row=2, .col=1 }); - uint16_t encoder_ccw_keycode = keymap_key_to_keycode(layer_now, (keypos_t){.row=2, .col=2 }); - if (index == 0) { /* First encoder */ - if(encoder_in == false){ - init_encoder_mode(keyboard_config.encoder_mode_index); - } - - if (!clockwise) { - switch(encoder_cw_keycode) { - - case KC_F13: - rgb_matrix_toggle(); - break; - - case KC_F14: - rgb_matrix_step(); - break; - - case KC_F15: - rgb_matrix_step_reverse(); - break; - - case KC_F16: - rgb_matrix_increase_hue(); //Increase the hue for effect range LEDs - break; - - case KC_F17: - rgb_matrix_decrease_hue(); //Decrease the hue for effect range LEDs - break; - - case KC_F18: - rgb_matrix_increase_sat(); //Increase the saturation for effect range LEDs - break; - - case KC_F19: - rgb_matrix_decrease_sat(); //Decrease the saturation for effect range LEDs - break; - - case KC_F20: - rgb_matrix_increase_val(); //Increase the value for effect range LEDs - break; - - case KC_F21: - rgb_matrix_decrease_val();//Decrease the value for effect range LEDs - break; - - case KC_VOLU: - case KC_VOLD: - tap_code(encoder_cw_keycode); - break; - - default: - tap_code(encoder_cw_keycode); - break; - } - set_volume_animation(true); - } else { - switch(encoder_ccw_keycode) { - - case KC_F13: - rgb_matrix_toggle(); - break; - - case KC_F14: - rgb_matrix_step(); - break; - - case KC_F15: - rgb_matrix_step_reverse(); - break; - - case KC_F16: - rgb_matrix_increase_hue(); //Increase the hue for effect range LEDs - break; - - case KC_F17: - rgb_matrix_decrease_hue(); //Decrease the hue for effect range LEDs - break; - - case KC_F18: - rgb_matrix_increase_sat(); //Increase the saturation for effect range LEDs - break; - - case KC_F19: - rgb_matrix_decrease_sat(); //Decrease the saturation for effect range LEDs - break; - - case KC_F20: - rgb_matrix_increase_val(); //Increase the value for effect range LEDs - break; - - case KC_F21: - rgb_matrix_decrease_val();//Decrease the value for effect range LEDs - break; - - case KC_VOLU: - case KC_VOLD: - tap_code(encoder_ccw_keycode); - break; - - default: - tap_code(encoder_ccw_keycode); - break; - } - set_volume_animation(false); - } - encoder_timer = timer_read32(); - } - return true; -} diff --git a/keyboards/owlab/voice65/hotswap/hotswap.h b/keyboards/owlab/voice65/hotswap/hotswap.h deleted file mode 100644 index 6536af4c49..0000000000 --- a/keyboards/owlab/voice65/hotswap/hotswap.h +++ /dev/null @@ -1,30 +0,0 @@ -/* Copyright 2021 kb-elmo<mail@elmo.space> - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see <http://www.gnu.org/licenses/>. - */ - -#pragma once - -#include "quantum.h" - -typedef union { - uint32_t raw; - struct { - uint8_t encoder_mode_index :8; - }; -} keyboard_config_t; - -extern keyboard_config_t keyboard_config; - -#define VOLUME_ANIMATION_TIMER 580 diff --git a/keyboards/owlab/voice65/hotswap/info.json b/keyboards/owlab/voice65/hotswap/info.json index 6b6474ab68..cf6c2503b6 100644 --- a/keyboards/owlab/voice65/hotswap/info.json +++ b/keyboards/owlab/voice65/hotswap/info.json @@ -22,10 +22,16 @@ {"pin_a": "B4", "pin_b": "B5"} ] }, + "qmk": { + "tap_keycode_delay": 10 + }, "ws2812": { "pin": "B15" }, "rgblight": { + "saturation_steps": 8, + "brightness_steps": 10, + "led_count": 20, "max_brightness": 180 }, "processor": "STM32F303", diff --git a/keyboards/owlab/voice65/hotswap/keymaps/default/keymap.c b/keyboards/owlab/voice65/hotswap/keymaps/default/keymap.c index 055f93e188..5d640c162b 100644 --- a/keyboards/owlab/voice65/hotswap/keymaps/default/keymap.c +++ b/keyboards/owlab/voice65/hotswap/keymaps/default/keymap.c @@ -16,35 +16,44 @@ #include QMK_KEYBOARD_H // How long (in ms) to wait between animation steps for the snake mode -const uint8_t RGBLED_SNAKE_INTERVALS[] PROGMEM = {100, 35, 20}; +const uint8_t RGBLED_SNAKE_INTERVALS[] PROGMEM = {100, 35, 20}; const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { [0] = LAYOUT_65_ansi_blocker( - KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_DEL, - KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_PGUP, - KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, KC_PGDN, + KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_DEL, + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_PGUP, + KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, KC_PGDN, KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_UP, MO(1), KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_RALT, KC_RCTL, KC_LEFT, KC_DOWN, KC_RGHT ), [1] = LAYOUT_65_ansi_blocker( KC_GRV, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_TRNS, QK_BOOT, KC_TRNS, RGB_TOG, RGB_MOD, RGB_RMOD,RGB_HUI, RGB_HUD, RGB_SAI, RGB_SAD, RGB_VAI, RGB_VAD, KC_TRNS, KC_TRNS, KC_TRNS, KC_HOME, KC_HOME, - KC_TRNS, KC_VOLU, KC_VOLD, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_END, - KC_TRNS, KC_F13, KC_F14, KC_F15, KC_F16, KC_F17, KC_F18, KC_F19, KC_F20, KC_F21, KC_TRNS, KC_TRNS, KC_F22, KC_TRNS, + KC_TRNS, KC_VOLU, KC_VOLD, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_END, + KC_TRNS, KC_F13, KC_F14, KC_F15, KC_F16, KC_F17, KC_F18, KC_F19, KC_F20, KC_F21, KC_TRNS, KC_TRNS, KC_F22, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_F23, KC_TRNS ), [2] = LAYOUT_65_ansi_blocker( KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_PGUP, KC_PGDN, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS ), [3] = LAYOUT_65_ansi_blocker( KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_WH_U, KC_WH_D, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS ) -};
\ No newline at end of file +}; + +#ifdef ENCODER_MAP_ENABLE +const uint16_t PROGMEM encoder_map[][NUM_ENCODERS][NUM_DIRECTIONS] = { + [0] = { ENCODER_CCW_CW(KC_VOLD, KC_VOLU) }, + [1] = { ENCODER_CCW_CW(KC_PGUP, KC_PGDN) }, + [2] = { ENCODER_CCW_CW(KC_WH_U, KC_WH_D) }, + [3] = { ENCODER_CCW_CW(_______, _______) }, +}; +#endif diff --git a/keyboards/owlab/voice65/hotswap/keymaps/default/rules.mk b/keyboards/owlab/voice65/hotswap/keymaps/default/rules.mk new file mode 100644 index 0000000000..ee32568148 --- /dev/null +++ b/keyboards/owlab/voice65/hotswap/keymaps/default/rules.mk @@ -0,0 +1 @@ +ENCODER_MAP_ENABLE = yes diff --git a/keyboards/owlab/voice65/hotswap/keymaps/via/keymap.c b/keyboards/owlab/voice65/hotswap/keymaps/via/keymap.c index 68801ff2f8..5d640c162b 100644 --- a/keyboards/owlab/voice65/hotswap/keymaps/via/keymap.c +++ b/keyboards/owlab/voice65/hotswap/keymaps/via/keymap.c @@ -16,36 +16,44 @@ #include QMK_KEYBOARD_H // How long (in ms) to wait between animation steps for the snake mode -const uint8_t RGBLED_SNAKE_INTERVALS[] PROGMEM = {100, 35, 20}; +const uint8_t RGBLED_SNAKE_INTERVALS[] PROGMEM = {100, 35, 20}; const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { [0] = LAYOUT_65_ansi_blocker( - KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_DEL, - KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_PGUP, - KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, KC_PGDN, + KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_DEL, + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_PGUP, + KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, KC_PGDN, KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_UP, MO(1), KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_RALT, KC_RCTL, KC_LEFT, KC_DOWN, KC_RGHT ), [1] = LAYOUT_65_ansi_blocker( KC_GRV, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_TRNS, QK_BOOT, KC_TRNS, RGB_TOG, RGB_MOD, RGB_RMOD,RGB_HUI, RGB_HUD, RGB_SAI, RGB_SAD, RGB_VAI, RGB_VAD, KC_TRNS, KC_TRNS, KC_TRNS, KC_HOME, KC_HOME, - KC_TRNS, KC_VOLU, KC_VOLD, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_END, - KC_TRNS, KC_F13, KC_F14, KC_F15, KC_F16, KC_F17, KC_F18, KC_F19, KC_F20, KC_F21, KC_TRNS, KC_TRNS, KC_F22, KC_TRNS, + KC_TRNS, KC_VOLU, KC_VOLD, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_END, + KC_TRNS, KC_F13, KC_F14, KC_F15, KC_F16, KC_F17, KC_F18, KC_F19, KC_F20, KC_F21, KC_TRNS, KC_TRNS, KC_F22, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_F23, KC_TRNS ), [2] = LAYOUT_65_ansi_blocker( KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_PGUP, KC_PGDN, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS ), [3] = LAYOUT_65_ansi_blocker( KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_WH_U, KC_WH_D, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS ) }; +#ifdef ENCODER_MAP_ENABLE +const uint16_t PROGMEM encoder_map[][NUM_ENCODERS][NUM_DIRECTIONS] = { + [0] = { ENCODER_CCW_CW(KC_VOLD, KC_VOLU) }, + [1] = { ENCODER_CCW_CW(KC_PGUP, KC_PGDN) }, + [2] = { ENCODER_CCW_CW(KC_WH_U, KC_WH_D) }, + [3] = { ENCODER_CCW_CW(_______, _______) }, +}; +#endif diff --git a/keyboards/owlab/voice65/hotswap/keymaps/via/rules.mk b/keyboards/owlab/voice65/hotswap/keymaps/via/rules.mk index 36b7ba9cbc..1189f4ad19 100644 --- a/keyboards/owlab/voice65/hotswap/keymaps/via/rules.mk +++ b/keyboards/owlab/voice65/hotswap/keymaps/via/rules.mk @@ -1,2 +1,3 @@ VIA_ENABLE = yes LTO_ENABLE = yes +ENCODER_MAP_ENABLE = yes diff --git a/keyboards/owlab/voice65/soldered/config.h b/keyboards/owlab/voice65/soldered/config.h index 6f41edccd0..ee882b0d41 100644 --- a/keyboards/owlab/voice65/soldered/config.h +++ b/keyboards/owlab/voice65/soldered/config.h @@ -27,10 +27,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. # define RGBLIGHT_EFFECT_SNAKE # define RGBLIGHT_EFFECT_STATIC_GRADIENT # define RGBLIGHT_EFFECT_TWINKLE -# define RGBLED_NUM 20 -# define RGBLIGHT_HUE_STEP 8 -# define RGBLIGHT_SAT_STEP 8 -# define RGBLIGHT_VAL_STEP 10 # define OWL_VOLUME_RANGE 50 /* RGB matrix*/ @@ -96,5 +92,3 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. # define ENABLE_RGB_MATRIX_SOLID_SPLASH # define ENABLE_RGB_MATRIX_SOLID_MULTISPLASH #endif - -#define TAP_CODE_DELAY 10 diff --git a/keyboards/owlab/voice65/soldered/info.json b/keyboards/owlab/voice65/soldered/info.json index 3b38b45da4..7e9d0be514 100644 --- a/keyboards/owlab/voice65/soldered/info.json +++ b/keyboards/owlab/voice65/soldered/info.json @@ -22,10 +22,16 @@ {"pin_a": "B4", "pin_b": "B5"} ] }, + "qmk": { + "tap_keycode_delay": 10 + }, "ws2812": { "pin": "B15" }, "rgblight": { + "saturation_steps": 8, + "brightness_steps": 10, + "led_count": 20, "max_brightness": 180 }, "processor": "STM32F303", diff --git a/keyboards/owlab/voice65/soldered/keymaps/default/keymap.c b/keyboards/owlab/voice65/soldered/keymaps/default/keymap.c index 055f93e188..5d640c162b 100644 --- a/keyboards/owlab/voice65/soldered/keymaps/default/keymap.c +++ b/keyboards/owlab/voice65/soldered/keymaps/default/keymap.c @@ -16,35 +16,44 @@ #include QMK_KEYBOARD_H // How long (in ms) to wait between animation steps for the snake mode -const uint8_t RGBLED_SNAKE_INTERVALS[] PROGMEM = {100, 35, 20}; +const uint8_t RGBLED_SNAKE_INTERVALS[] PROGMEM = {100, 35, 20}; const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { [0] = LAYOUT_65_ansi_blocker( - KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_DEL, - KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_PGUP, - KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, KC_PGDN, + KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_DEL, + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_PGUP, + KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, KC_PGDN, KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_UP, MO(1), KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_RALT, KC_RCTL, KC_LEFT, KC_DOWN, KC_RGHT ), [1] = LAYOUT_65_ansi_blocker( KC_GRV, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_TRNS, QK_BOOT, KC_TRNS, RGB_TOG, RGB_MOD, RGB_RMOD,RGB_HUI, RGB_HUD, RGB_SAI, RGB_SAD, RGB_VAI, RGB_VAD, KC_TRNS, KC_TRNS, KC_TRNS, KC_HOME, KC_HOME, - KC_TRNS, KC_VOLU, KC_VOLD, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_END, - KC_TRNS, KC_F13, KC_F14, KC_F15, KC_F16, KC_F17, KC_F18, KC_F19, KC_F20, KC_F21, KC_TRNS, KC_TRNS, KC_F22, KC_TRNS, + KC_TRNS, KC_VOLU, KC_VOLD, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_END, + KC_TRNS, KC_F13, KC_F14, KC_F15, KC_F16, KC_F17, KC_F18, KC_F19, KC_F20, KC_F21, KC_TRNS, KC_TRNS, KC_F22, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_F23, KC_TRNS ), [2] = LAYOUT_65_ansi_blocker( KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_PGUP, KC_PGDN, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS ), [3] = LAYOUT_65_ansi_blocker( KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_WH_U, KC_WH_D, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS ) -};
\ No newline at end of file +}; + +#ifdef ENCODER_MAP_ENABLE +const uint16_t PROGMEM encoder_map[][NUM_ENCODERS][NUM_DIRECTIONS] = { + [0] = { ENCODER_CCW_CW(KC_VOLD, KC_VOLU) }, + [1] = { ENCODER_CCW_CW(KC_PGUP, KC_PGDN) }, + [2] = { ENCODER_CCW_CW(KC_WH_U, KC_WH_D) }, + [3] = { ENCODER_CCW_CW(_______, _______) }, +}; +#endif diff --git a/keyboards/owlab/voice65/soldered/keymaps/default/rules.mk b/keyboards/owlab/voice65/soldered/keymaps/default/rules.mk new file mode 100644 index 0000000000..ee32568148 --- /dev/null +++ b/keyboards/owlab/voice65/soldered/keymaps/default/rules.mk @@ -0,0 +1 @@ +ENCODER_MAP_ENABLE = yes diff --git a/keyboards/owlab/voice65/soldered/keymaps/via/keymap.c b/keyboards/owlab/voice65/soldered/keymaps/via/keymap.c index 055f93e188..5d640c162b 100644 --- a/keyboards/owlab/voice65/soldered/keymaps/via/keymap.c +++ b/keyboards/owlab/voice65/soldered/keymaps/via/keymap.c @@ -16,35 +16,44 @@ #include QMK_KEYBOARD_H // How long (in ms) to wait between animation steps for the snake mode -const uint8_t RGBLED_SNAKE_INTERVALS[] PROGMEM = {100, 35, 20}; +const uint8_t RGBLED_SNAKE_INTERVALS[] PROGMEM = {100, 35, 20}; const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { [0] = LAYOUT_65_ansi_blocker( - KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_DEL, - KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_PGUP, - KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, KC_PGDN, + KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_DEL, + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_PGUP, + KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, KC_PGDN, KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_UP, MO(1), KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_RALT, KC_RCTL, KC_LEFT, KC_DOWN, KC_RGHT ), [1] = LAYOUT_65_ansi_blocker( KC_GRV, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_TRNS, QK_BOOT, KC_TRNS, RGB_TOG, RGB_MOD, RGB_RMOD,RGB_HUI, RGB_HUD, RGB_SAI, RGB_SAD, RGB_VAI, RGB_VAD, KC_TRNS, KC_TRNS, KC_TRNS, KC_HOME, KC_HOME, - KC_TRNS, KC_VOLU, KC_VOLD, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_END, - KC_TRNS, KC_F13, KC_F14, KC_F15, KC_F16, KC_F17, KC_F18, KC_F19, KC_F20, KC_F21, KC_TRNS, KC_TRNS, KC_F22, KC_TRNS, + KC_TRNS, KC_VOLU, KC_VOLD, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_END, + KC_TRNS, KC_F13, KC_F14, KC_F15, KC_F16, KC_F17, KC_F18, KC_F19, KC_F20, KC_F21, KC_TRNS, KC_TRNS, KC_F22, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_F23, KC_TRNS ), [2] = LAYOUT_65_ansi_blocker( KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_PGUP, KC_PGDN, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS ), [3] = LAYOUT_65_ansi_blocker( KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_WH_U, KC_WH_D, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS ) -};
\ No newline at end of file +}; + +#ifdef ENCODER_MAP_ENABLE +const uint16_t PROGMEM encoder_map[][NUM_ENCODERS][NUM_DIRECTIONS] = { + [0] = { ENCODER_CCW_CW(KC_VOLD, KC_VOLU) }, + [1] = { ENCODER_CCW_CW(KC_PGUP, KC_PGDN) }, + [2] = { ENCODER_CCW_CW(KC_WH_U, KC_WH_D) }, + [3] = { ENCODER_CCW_CW(_______, _______) }, +}; +#endif diff --git a/keyboards/owlab/voice65/soldered/keymaps/via/rules.mk b/keyboards/owlab/voice65/soldered/keymaps/via/rules.mk index 36b7ba9cbc..1189f4ad19 100644 --- a/keyboards/owlab/voice65/soldered/keymaps/via/rules.mk +++ b/keyboards/owlab/voice65/soldered/keymaps/via/rules.mk @@ -1,2 +1,3 @@ VIA_ENABLE = yes LTO_ENABLE = yes +ENCODER_MAP_ENABLE = yes diff --git a/keyboards/owlab/voice65/soldered/soldered.c b/keyboards/owlab/voice65/soldered/soldered.c index cfdaaad4ae..1444b05864 100644 --- a/keyboards/owlab/voice65/soldered/soldered.c +++ b/keyboards/owlab/voice65/soldered/soldered.c @@ -14,7 +14,7 @@ * along with this program. If not, see <http://www.gnu.org/licenses/>. */ -#include "soldered.h" +#include "quantum.h" #ifdef RGB_MATRIX_ENABLE const is31_led g_is31_leds[RGB_MATRIX_LED_COUNT] = { @@ -126,330 +126,3 @@ bool rgb_matrix_indicators_kb(void) { } return true; } - -enum encoder_modes{ - ENCODER_MODE_ONE, - ENCODER_MODE_TWO, - ENCODER_MODE_THREE -}; - -keyboard_config_t keyboard_config; -rgblight_config_t rgblight_config; - -uint8_t pre_hue, pre_sat, pre_val; -uint8_t previous_rgb_mode = 0; -uint8_t dir_hue, dir_sat; - -bool encoder_in = false; -uint32_t encoder_timer; - -bool encoder_ani_start= false; -uint32_t encoder_ani_timer = 0; - -bool encoder_direction_start = false; -uint32_t encoder_direction_timer = 0; - - -bool lizm_restart_snake = false; -void rgblight_snake_restart(uint8_t hue, uint8_t sat, uint8_t val){ - lizm_restart_snake = true; // restart signal to local each effect - rgblight_config.hue = hue; - rgblight_config.sat = sat; - rgblight_config.val = val; -} - - -void keyboard_post_init_kb(void){ - keyboard_config.raw = eeconfig_read_kb(); - if( keyboard_config.encoder_mode_index > ENCODER_MODE_THREE ){ - keyboard_config.encoder_mode_index = ENCODER_MODE_ONE; - eeconfig_update_kb(keyboard_config.raw); - } -} - -void switch_encoder_mode(uint8_t mode){ - switch(mode){ - case ENCODER_MODE_ONE: - dir_hue = 88; - dir_sat = 255; - break; - - case ENCODER_MODE_TWO: - dir_hue = 0; - dir_sat = 240; - break; - - case ENCODER_MODE_THREE: - dir_hue = 176; - dir_sat = 255; - break; - } - rgblight_sethsv_noeeprom(dir_hue,dir_sat,pre_val); -} - - -void init_encoder_mode(uint8_t mode){ - previous_rgb_mode = rgblight_get_mode(); - pre_hue = rgblight_get_hue(); - pre_sat = rgblight_get_sat(); - pre_val = rgblight_get_val(); - encoder_in = true; - - rgblight_mode_noeeprom(RGBLIGHT_MODE_STATIC_LIGHT); - - switch_encoder_mode(mode); -} - - -void set_encoder_mode(uint8_t mode){ - if(encoder_in == false){ - init_encoder_mode(mode); - }else{ - switch_encoder_mode(mode); - } - eeconfig_update_kb(keyboard_config.raw); - encoder_timer = timer_read32(); -} - -bool process_record_kb(uint16_t keycode, keyrecord_t *record) { - if (record->event.pressed) { - switch(keycode) { - case RGB_MOD: - case RGB_RMOD: - case RGB_HUI: - case RGB_HUD: - case RGB_SAI: - case RGB_SAD: - case RGB_VAI: - case RGB_VAD: - - if(encoder_in){ - return false; - } - break; - - case KC_F13: - rgb_matrix_toggle(); - break; - - case KC_F14: - rgb_matrix_step(); - break; - - case KC_F15: - rgb_matrix_step_reverse(); - break; - - case KC_F16: - rgb_matrix_increase_hue(); //Increase the hue for effect range LEDs - break; - - case KC_F17: - rgb_matrix_decrease_hue(); //Decrease the hue for effect range LEDs - break; - - case KC_F18: - rgb_matrix_increase_sat(); //Increase the saturation for effect range LEDs - break; - - case KC_F19: - rgb_matrix_decrease_sat(); //Decrease the saturation for effect range LEDs - break; - - case KC_F20: - rgb_matrix_increase_val(); //Increase the value for effect range LEDs - break; - - case KC_F21: - rgb_matrix_decrease_val();//Decrease the value for effect range LEDs - break; - - case KC_F22: //change encoder mode upward - if(!encoder_direction_start){ - if(keyboard_config.encoder_mode_index < ENCODER_MODE_THREE){ - keyboard_config.encoder_mode_index++; - } - else{ - keyboard_config.encoder_mode_index = ENCODER_MODE_ONE; - } - set_encoder_mode(keyboard_config.encoder_mode_index); - } - return false; - - case KC_F23: - if(!encoder_direction_start){ - if(keyboard_config.encoder_mode_index > ENCODER_MODE_ONE){ - keyboard_config.encoder_mode_index--; - } - else{ - keyboard_config.encoder_mode_index = ENCODER_MODE_THREE; - } - set_encoder_mode(keyboard_config.encoder_mode_index); - } - return false; - - default: - break; - } - } - return process_record_user(keycode, record); -} - - -void matrix_scan_kb(void) { - if(encoder_in){ - if(timer_elapsed32(encoder_timer) > 5000){ - rgblight_mode(previous_rgb_mode); - rgblight_sethsv(pre_hue, pre_sat, pre_val); - encoder_in = false; - } - } - - if(encoder_ani_start){ - if(timer_elapsed32(encoder_ani_timer) > VOLUME_ANIMATION_TIMER){ - encoder_ani_start = false; - rgblight_sethsv_noeeprom(0,0,0); - } - } - - if(encoder_direction_start){ - if(timer_elapsed32(encoder_direction_timer) > (VOLUME_ANIMATION_TIMER+1500)){ - rgblight_mode_noeeprom(RGBLIGHT_MODE_STATIC_LIGHT); - rgblight_sethsv_noeeprom(dir_hue, dir_sat, pre_val); - encoder_direction_start = false; - } - } - matrix_scan_user(); -} - - -void set_volume_animation(bool increase){ - if(!encoder_ani_start){ - rgblight_snake_restart(dir_hue, dir_sat, pre_val); - } - - if(increase){ - rgblight_mode_noeeprom(17); - } else { - rgblight_mode_noeeprom(18); - } - - encoder_ani_timer = timer_read32(); - encoder_direction_timer = encoder_ani_timer; - encoder_ani_start = true; - encoder_direction_start = true; -} - - -bool encoder_update_kb(uint8_t index, bool clockwise) { - uint8_t layer_now = keyboard_config.encoder_mode_index +1; - uint16_t encoder_cw_keycode = keymap_key_to_keycode(layer_now, (keypos_t){.row=2, .col=1 }); - uint16_t encoder_ccw_keycode = keymap_key_to_keycode(layer_now, (keypos_t){.row=2, .col=2 }); - if (index == 0) { /* First encoder */ - if(encoder_in == false){ - init_encoder_mode(keyboard_config.encoder_mode_index); - } - - if (!clockwise) { - switch(encoder_cw_keycode) { - - case KC_F13: - rgb_matrix_toggle(); - break; - - case KC_F14: - rgb_matrix_step(); - break; - - case KC_F15: - rgb_matrix_step_reverse(); - break; - - case KC_F16: - rgb_matrix_increase_hue(); //Increase the hue for effect range LEDs - break; - - case KC_F17: - rgb_matrix_decrease_hue(); //Decrease the hue for effect range LEDs - break; - - case KC_F18: - rgb_matrix_increase_sat(); //Increase the saturation for effect range LEDs - break; - - case KC_F19: - rgb_matrix_decrease_sat(); //Decrease the saturation for effect range LEDs - break; - - case KC_F20: - rgb_matrix_increase_val(); //Increase the value for effect range LEDs - break; - - case KC_F21: - rgb_matrix_decrease_val();//Decrease the value for effect range LEDs - break; - - case KC_VOLU: - case KC_VOLD: - tap_code(encoder_cw_keycode); - break; - - default: - tap_code(encoder_cw_keycode); - break; - } - set_volume_animation(true); - } else { - switch(encoder_ccw_keycode) { - - case KC_F13: - rgb_matrix_toggle(); - break; - - case KC_F14: - rgb_matrix_step(); - break; - - case KC_F15: - rgb_matrix_step_reverse(); - break; - - case KC_F16: - rgb_matrix_increase_hue(); //Increase the hue for effect range LEDs - break; - - case KC_F17: - rgb_matrix_decrease_hue(); //Decrease the hue for effect range LEDs - break; - - case KC_F18: - rgb_matrix_increase_sat(); //Increase the saturation for effect range LEDs - break; - - case KC_F19: - rgb_matrix_decrease_sat(); //Decrease the saturation for effect range LEDs - break; - - case KC_F20: - rgb_matrix_increase_val(); //Increase the value for effect range LEDs - break; - - case KC_F21: - rgb_matrix_decrease_val();//Decrease the value for effect range LEDs - break; - - case KC_VOLU: - case KC_VOLD: - tap_code(encoder_ccw_keycode); - break; - - default: - tap_code(encoder_ccw_keycode); - break; - } - set_volume_animation(false); - } - encoder_timer = timer_read32(); - } - return true; -} diff --git a/keyboards/owlab/voice65/soldered/soldered.h b/keyboards/owlab/voice65/soldered/soldered.h deleted file mode 100644 index 2c10428cec..0000000000 --- a/keyboards/owlab/voice65/soldered/soldered.h +++ /dev/null @@ -1,30 +0,0 @@ -/* Copyright 2021 kb-elmo<mail@elmo.space> - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see <http://www.gnu.org/licenses/>. - */ - -#pragma once - -#include "quantum.h" - -typedef union { - uint32_t raw; - struct { - uint8_t encoder_mode_index :8; - }; -} keyboard_config_t; - -extern keyboard_config_t keyboard_config; - -#define VOLUME_ANIMATION_TIMER 580 diff --git a/keyboards/p3d/glitch/config.h b/keyboards/p3d/glitch/config.h index a754828053..cc72fe4c95 100644 --- a/keyboards/p3d/glitch/config.h +++ b/keyboards/p3d/glitch/config.h @@ -17,7 +17,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #pragma once -#define RGBLED_NUM 25 #define RGBLIGHT_EFFECT_BREATHING #define RGBLIGHT_EFFECT_RAINBOW_MOOD #define RGBLIGHT_EFFECT_RAINBOW_SWIRL diff --git a/keyboards/p3d/glitch/info.json b/keyboards/p3d/glitch/info.json index 4f323df447..c42cc3dbf4 100644 --- a/keyboards/p3d/glitch/info.json +++ b/keyboards/p3d/glitch/info.json @@ -19,6 +19,9 @@ {"pin_a": "F6", "pin_b": "F7", "resolution": 2} ] }, + "rgblight": { + "led_count": 25 + }, "ws2812": { "pin": "B1" }, diff --git a/keyboards/panc40/config.h b/keyboards/panc40/config.h index edc623d08f..d702489ee7 100644 --- a/keyboards/panc40/config.h +++ b/keyboards/panc40/config.h @@ -16,7 +16,3 @@ #define RGBLIGHT_EFFECT_RGB_TEST #define RGBLIGHT_EFFECT_ALTERNATING #define RGBLIGHT_EFFECT_TWINKLE -#define RGBLED_NUM 8 -#define RGBLIGHT_HUE_STEP 8 -#define RGBLIGHT_SAT_STEP 8 -#define RGBLIGHT_VAL_STEP 8 diff --git a/keyboards/panc40/info.json b/keyboards/panc40/info.json index 89c9639139..349a7857e7 100644 --- a/keyboards/panc40/info.json +++ b/keyboards/panc40/info.json @@ -8,6 +8,11 @@ "pid": "0x6060", "device_version": "0.0.1" }, + "rgblight": { + "saturation_steps": 8, + "brightness_steps": 8, + "led_count": 8 + }, "ws2812": { "pin": "D2" }, diff --git a/keyboards/panc60/config.h b/keyboards/panc60/config.h index d324ea3f81..d849732a07 100644 --- a/keyboards/panc60/config.h +++ b/keyboards/panc60/config.h @@ -17,9 +17,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #pragma once - -#define RGBLED_NUM 12 - #define RGBLIGHT_EFFECT_BREATHING #define RGBLIGHT_EFFECT_RAINBOW_MOOD #define RGBLIGHT_EFFECT_RAINBOW_SWIRL diff --git a/keyboards/panc60/info.json b/keyboards/panc60/info.json index 077949cd09..05793bd412 100644 --- a/keyboards/panc60/info.json +++ b/keyboards/panc60/info.json @@ -16,6 +16,9 @@ "backlight": { "pin": "D4" }, + "rgblight": { + "led_count": 12 + }, "ws2812": { "driver": "i2c" }, diff --git a/keyboards/pearl/config.h b/keyboards/pearl/config.h index 2a51abdab2..d849732a07 100644 --- a/keyboards/pearl/config.h +++ b/keyboards/pearl/config.h @@ -27,4 +27,3 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #define RGBLIGHT_EFFECT_RGB_TEST #define RGBLIGHT_EFFECT_ALTERNATING #define RGBLIGHT_EFFECT_TWINKLE -#define RGBLED_NUM 12 diff --git a/keyboards/pearl/info.json b/keyboards/pearl/info.json index 8ac8ef0a7e..a56cf0aca2 100644 --- a/keyboards/pearl/info.json +++ b/keyboards/pearl/info.json @@ -15,6 +15,9 @@ "backlight": { "pin": "D4" }, + "rgblight": { + "led_count": 12 + }, "ws2812": { "driver": "i2c" }, diff --git a/keyboards/pearlboards/atlas/config.h b/keyboards/pearlboards/atlas/config.h index 009f810b0c..65443961ea 100644 --- a/keyboards/pearlboards/atlas/config.h +++ b/keyboards/pearlboards/atlas/config.h @@ -30,7 +30,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #define V_PEAK 5 /*== all animations enabled ==*/ -/* If RGBLIGHT_SLEEP defined, the RGB lighting will be switched off when the host goes to sleep */ #define RGBLIGHT_EFFECT_ALTERNATING #define RGBLIGHT_EFFECT_BREATHING #define RGBLIGHT_EFFECT_CHRISTMAS @@ -40,11 +39,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #define RGBLIGHT_EFFECT_SNAKE #define RGBLIGHT_EFFECT_STATIC_GRADIENT #define RGBLIGHT_EFFECT_TWINKLE -#define RGBLED_NUM 8 -#define RGBLIGHT_HUE_STEP 8 -#define RGBLIGHT_SAT_STEP 8 -#define RGBLIGHT_VAL_STEP 8 -#define RGBLIGHT_SLEEP /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ #define LOCKING_SUPPORT_ENABLE diff --git a/keyboards/pearlboards/atlas/info.json b/keyboards/pearlboards/atlas/info.json index 6c944ff329..31e5bdeba8 100644 --- a/keyboards/pearlboards/atlas/info.json +++ b/keyboards/pearlboards/atlas/info.json @@ -24,6 +24,12 @@ "scroll_lock": "F6", "on_state": 0 }, + "rgblight": { + "saturation_steps": 8, + "brightness_steps": 8, + "led_count": 8, + "sleep": true + }, "ws2812": { "pin": "B6" }, diff --git a/keyboards/pearlboards/pandora/config.h b/keyboards/pearlboards/pandora/config.h index 02fc30db97..e5b1903586 100644 --- a/keyboards/pearlboards/pandora/config.h +++ b/keyboards/pearlboards/pandora/config.h @@ -20,7 +20,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #define DIP_SWITCH_PINS { B2, B5 } /*== all animations enabled ==*/ -/* If RGBLIGHT_SLEEP defined, the RGB lighting will be switched off when the host goes to sleep */ #define RGBLIGHT_EFFECT_ALTERNATING #define RGBLIGHT_EFFECT_BREATHING #define RGBLIGHT_EFFECT_CHRISTMAS @@ -30,11 +29,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #define RGBLIGHT_EFFECT_SNAKE #define RGBLIGHT_EFFECT_STATIC_GRADIENT #define RGBLIGHT_EFFECT_TWINKLE -#define RGBLED_NUM 12 -#define RGBLIGHT_HUE_STEP 8 -#define RGBLIGHT_SAT_STEP 8 -#define RGBLIGHT_VAL_STEP 8 -#define RGBLIGHT_SLEEP /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ #define LOCKING_SUPPORT_ENABLE diff --git a/keyboards/pearlboards/pandora/info.json b/keyboards/pearlboards/pandora/info.json index 39f271d1b5..a56fd7e544 100644 --- a/keyboards/pearlboards/pandora/info.json +++ b/keyboards/pearlboards/pandora/info.json @@ -22,6 +22,12 @@ "caps_lock": "E6", "on_state": 0 }, + "rgblight": { + "saturation_steps": 8, + "brightness_steps": 8, + "led_count": 12, + "sleep": true + }, "ws2812": { "pin": "B1" }, diff --git a/keyboards/pearlboards/pearl/config.h b/keyboards/pearlboards/pearl/config.h index 361c315929..374e41284e 100644 --- a/keyboards/pearlboards/pearl/config.h +++ b/keyboards/pearlboards/pearl/config.h @@ -30,7 +30,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #define V_PEAK 5 /*== all animations enabled ==*/ -/* If RGBLIGHT_SLEEP defined, the RGB lighting will be switched off when the host goes to sleep */ #define RGBLIGHT_EFFECT_ALTERNATING #define RGBLIGHT_EFFECT_BREATHING #define RGBLIGHT_EFFECT_CHRISTMAS @@ -41,11 +40,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #define RGBLIGHT_EFFECT_SNAKE #define RGBLIGHT_EFFECT_STATIC_GRADIENT #define RGBLIGHT_EFFECT_TWINKLE -# define RGBLED_NUM 10 -# define RGBLIGHT_HUE_STEP 8 -# define RGBLIGHT_SAT_STEP 8 -# define RGBLIGHT_VAL_STEP 8 -# define RGBLIGHT_SLEEP /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ #define LOCKING_SUPPORT_ENABLE diff --git a/keyboards/pearlboards/pearl/info.json b/keyboards/pearlboards/pearl/info.json index c14c6685b3..d99dd00dd6 100644 --- a/keyboards/pearlboards/pearl/info.json +++ b/keyboards/pearlboards/pearl/info.json @@ -19,6 +19,12 @@ "scroll_lock": "B2", "on_state": 0 }, + "rgblight": { + "saturation_steps": 8, + "brightness_steps": 8, + "led_count": 10, + "sleep": true + }, "ws2812": { "pin": "B3" }, diff --git a/keyboards/pearlboards/zeus/config.h b/keyboards/pearlboards/zeus/config.h index 102c43e168..b3a6188f50 100644 --- a/keyboards/pearlboards/zeus/config.h +++ b/keyboards/pearlboards/zeus/config.h @@ -34,7 +34,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #define V_PEAK 5 /*== all animations enabled ==*/ -/* If RGBLIGHT_SLEEP defined, the RGB lighting will be switched off when the host goes to sleep */ #define RGBLIGHT_EFFECT_ALTERNATING #define RGBLIGHT_EFFECT_BREATHING #define RGBLIGHT_EFFECT_CHRISTMAS @@ -44,11 +43,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #define RGBLIGHT_EFFECT_SNAKE #define RGBLIGHT_EFFECT_STATIC_GRADIENT #define RGBLIGHT_EFFECT_TWINKLE -#define RGBLED_NUM 2 -#define RGBLIGHT_HUE_STEP 8 -#define RGBLIGHT_SAT_STEP 8 -#define RGBLIGHT_VAL_STEP 8 -#define RGBLIGHT_SLEEP /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ #define LOCKING_SUPPORT_ENABLE diff --git a/keyboards/pearlboards/zeus/info.json b/keyboards/pearlboards/zeus/info.json index 0fbfc75c21..2b4990390e 100644 --- a/keyboards/pearlboards/zeus/info.json +++ b/keyboards/pearlboards/zeus/info.json @@ -24,6 +24,12 @@ "scroll_lock": "C3", "on_state": 0 }, + "rgblight": { + "saturation_steps": 8, + "brightness_steps": 8, + "led_count": 2, + "sleep": true + }, "ws2812": { "pin": "D5" }, diff --git a/keyboards/pearlboards/zeuspad/config.h b/keyboards/pearlboards/zeuspad/config.h index 205cad6e32..4768e52149 100644 --- a/keyboards/pearlboards/zeuspad/config.h +++ b/keyboards/pearlboards/zeuspad/config.h @@ -25,7 +25,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #define AUDIO_PIN C6 /*== all animations enabled ==*/ -/* If RGBLIGHT_SLEEP defined, the RGB lighting will be switched off when the host goes to sleep */ #define RGBLIGHT_EFFECT_ALTERNATING #define RGBLIGHT_EFFECT_BREATHING #define RGBLIGHT_EFFECT_CHRISTMAS @@ -35,11 +34,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #define RGBLIGHT_EFFECT_SNAKE #define RGBLIGHT_EFFECT_STATIC_GRADIENT #define RGBLIGHT_EFFECT_TWINKLE -#define RGBLED_NUM 2 -#define RGBLIGHT_HUE_STEP 8 -#define RGBLIGHT_SAT_STEP 8 -#define RGBLIGHT_VAL_STEP 8 -#define RGBLIGHT_SLEEP /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ #define LOCKING_SUPPORT_ENABLE diff --git a/keyboards/pearlboards/zeuspad/info.json b/keyboards/pearlboards/zeuspad/info.json index 9bd5a1a99a..2d57bffde2 100644 --- a/keyboards/pearlboards/zeuspad/info.json +++ b/keyboards/pearlboards/zeuspad/info.json @@ -18,6 +18,12 @@ {"pin_a": "D6", "pin_b": "D4", "resolution": 1} ] }, + "rgblight": { + "saturation_steps": 8, + "brightness_steps": 8, + "led_count": 2, + "sleep": true + }, "ws2812": { "pin": "B7" }, diff --git a/keyboards/peranekofactory/tone/rev1/config.h b/keyboards/peranekofactory/tone/rev1/config.h index c97fab915a..bbe3b73627 100644 --- a/keyboards/peranekofactory/tone/rev1/config.h +++ b/keyboards/peranekofactory/tone/rev1/config.h @@ -17,8 +17,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #pragma once -#define TAP_CODE_DELAY 100 - /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ #define LOCKING_SUPPORT_ENABLE /* Locking resynchronize hack */ diff --git a/keyboards/peranekofactory/tone/rev1/info.json b/keyboards/peranekofactory/tone/rev1/info.json index 5a19b72ffe..67e08be688 100644 --- a/keyboards/peranekofactory/tone/rev1/info.json +++ b/keyboards/peranekofactory/tone/rev1/info.json @@ -13,6 +13,9 @@ {"pin_a": "B5", "pin_b": "B4"} ] }, + "qmk": { + "tap_keycode_delay": 100 + }, "processor": "atmega32u4", "bootloader": "caterina", "matrix_pins": { diff --git a/keyboards/peranekofactory/tone/rev2/config.h b/keyboards/peranekofactory/tone/rev2/config.h index c97fab915a..bbe3b73627 100644 --- a/keyboards/peranekofactory/tone/rev2/config.h +++ b/keyboards/peranekofactory/tone/rev2/config.h @@ -17,8 +17,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #pragma once -#define TAP_CODE_DELAY 100 - /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ #define LOCKING_SUPPORT_ENABLE /* Locking resynchronize hack */ diff --git a/keyboards/peranekofactory/tone/rev2/info.json b/keyboards/peranekofactory/tone/rev2/info.json index 5a19b72ffe..67e08be688 100644 --- a/keyboards/peranekofactory/tone/rev2/info.json +++ b/keyboards/peranekofactory/tone/rev2/info.json @@ -13,6 +13,9 @@ {"pin_a": "B5", "pin_b": "B4"} ] }, + "qmk": { + "tap_keycode_delay": 100 + }, "processor": "atmega32u4", "bootloader": "caterina", "matrix_pins": { diff --git a/keyboards/percent/booster/config.h b/keyboards/percent/booster/config.h index d0537fd5d7..b8be4dca5f 100644 --- a/keyboards/percent/booster/config.h +++ b/keyboards/percent/booster/config.h @@ -17,11 +17,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #pragma once - #define RGBLED_NUM 10 - #define RGBLIGHT_HUE_STEP 8 - #define RGBLIGHT_SAT_STEP 8 - #define RGBLIGHT_VAL_STEP 8 - #define RGBLIGHT_SLEEP #define RGBLIGHT_EFFECT_BREATHING #define RGBLIGHT_EFFECT_RAINBOW_MOOD #define RGBLIGHT_EFFECT_RAINBOW_SWIRL diff --git a/keyboards/percent/booster/info.json b/keyboards/percent/booster/info.json index ba8be4a603..6a7c3ef4ad 100644 --- a/keyboards/percent/booster/info.json +++ b/keyboards/percent/booster/info.json @@ -16,6 +16,12 @@ "backlight": { "pin": "B7" }, + "rgblight": { + "saturation_steps": 8, + "brightness_steps": 8, + "led_count": 10, + "sleep": true + }, "ws2812": { "pin": "E2" }, diff --git a/keyboards/percent/canoe/config.h b/keyboards/percent/canoe/config.h index b7aa6ca2e9..d849732a07 100644 --- a/keyboards/percent/canoe/config.h +++ b/keyboards/percent/canoe/config.h @@ -17,9 +17,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #pragma once - -#define RGBLED_NUM 2 - #define RGBLIGHT_EFFECT_BREATHING #define RGBLIGHT_EFFECT_RAINBOW_MOOD #define RGBLIGHT_EFFECT_RAINBOW_SWIRL diff --git a/keyboards/percent/canoe/info.json b/keyboards/percent/canoe/info.json index fcbdf6bac8..5cc689c1c2 100644 --- a/keyboards/percent/canoe/info.json +++ b/keyboards/percent/canoe/info.json @@ -16,6 +16,9 @@ "backlight": { "pin": "D4" }, + "rgblight": { + "led_count": 2 + }, "ws2812": { "driver": "i2c" }, diff --git a/keyboards/percent/canoe/keymaps/boy_314/keymap.c b/keyboards/percent/canoe/keymaps/boy_314/keymap.c index e9c56ed1b1..cccfd448a0 100644 --- a/keyboards/percent/canoe/keymaps/boy_314/keymap.c +++ b/keyboards/percent/canoe/keymaps/boy_314/keymap.c @@ -47,10 +47,11 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { }; -void led_set_user(uint8_t usb_led) { - if (usb_led & (1<<USB_LED_CAPS_LOCK)) { +bool led_update_user(led_t led_state) { + if (led_state.caps_lock) { rgblight_sethsv(HSV_RED); } else { rgblight_sethsv(HSV_TURQUOISE); } + return false; }
\ No newline at end of file diff --git a/keyboards/percent/skog/config.h b/keyboards/percent/skog/config.h index 6907429c39..0f45c7154e 100644 --- a/keyboards/percent/skog/config.h +++ b/keyboards/percent/skog/config.h @@ -17,7 +17,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #pragma once -#define RGBLED_NUM 2 #define RGBLIGHT_EFFECT_BREATHING #define RGBLIGHT_EFFECT_RAINBOW_MOOD #define RGBLIGHT_EFFECT_RAINBOW_SWIRL diff --git a/keyboards/percent/skog/info.json b/keyboards/percent/skog/info.json index 19e7f81603..0570481adc 100644 --- a/keyboards/percent/skog/info.json +++ b/keyboards/percent/skog/info.json @@ -17,6 +17,9 @@ "pin": "D4", "levels": 5 }, + "rgblight": { + "led_count": 2 + }, "ws2812": { "driver": "i2c" }, diff --git a/keyboards/percent/skog_lite/config.h b/keyboards/percent/skog_lite/config.h index 75b78de22d..d849732a07 100644 --- a/keyboards/percent/skog_lite/config.h +++ b/keyboards/percent/skog_lite/config.h @@ -17,9 +17,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #pragma once - -#define RGBLED_NUM 18 - #define RGBLIGHT_EFFECT_BREATHING #define RGBLIGHT_EFFECT_RAINBOW_MOOD #define RGBLIGHT_EFFECT_RAINBOW_SWIRL diff --git a/keyboards/percent/skog_lite/info.json b/keyboards/percent/skog_lite/info.json index 4133d5c81b..1b868a244f 100644 --- a/keyboards/percent/skog_lite/info.json +++ b/keyboards/percent/skog_lite/info.json @@ -16,6 +16,9 @@ "backlight": { "pin": "D4" }, + "rgblight": { + "led_count": 18 + }, "ws2812": { "driver": "i2c" }, diff --git a/keyboards/phage_studio/pila87/rules.mk b/keyboards/phage_studio/pila87/rules.mk index 05f967d7a8..cd96ec2c2c 100644 --- a/keyboards/phage_studio/pila87/rules.mk +++ b/keyboards/phage_studio/pila87/rules.mk @@ -14,9 +14,6 @@ BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow AUDIO_ENABLE = no # Audio output -# Enter lower-power sleep mode when on the ChibiOS idle thread -OPT_DEFS += -DCORTEX_ENABLE_WFI_IDLE=TRUE - # RGB Matrix enabled RGB_MATRIX_ENABLE = yes diff --git a/keyboards/phantom/config.h b/keyboards/phantom/config.h index 5a4961d3bb..06338d2a2d 100644 --- a/keyboards/phantom/config.h +++ b/keyboards/phantom/config.h @@ -17,11 +17,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #pragma once -# define RGBLED_NUM 20 -# define RGBLIGHT_HUE_STEP 10 -# define RGBLIGHT_SAT_STEP 17 -# define RGBLIGHT_VAL_STEP 17 -//# define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */ # define RGBLIGHT_EFFECT_BREATHING # define RGBLIGHT_EFFECT_RAINBOW_MOOD # define RGBLIGHT_EFFECT_RAINBOW_SWIRL diff --git a/keyboards/phantom/info.json b/keyboards/phantom/info.json index bf858eaf06..9c0249e3dd 100644 --- a/keyboards/phantom/info.json +++ b/keyboards/phantom/info.json @@ -17,6 +17,10 @@ "caps_lock": "B6", "scroll_lock": "B7" }, + "rgblight": { + "hue_steps": 10, + "led_count": 20 + }, "ws2812": { "pin": "E2" }, diff --git a/keyboards/phrygian/ph100/rules.mk b/keyboards/phrygian/ph100/rules.mk index 707adf67c4..5fb302d01f 100644 --- a/keyboards/phrygian/ph100/rules.mk +++ b/keyboards/phrygian/ph100/rules.mk @@ -12,5 +12,3 @@ RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow AUDIO_ENABLE = no # Audio output -# Enter lower-power sleep mode when on the ChibiOS idle thread -OPT_DEFS += -DCORTEX_ENABLE_WFI_IDLE=TRUE diff --git a/keyboards/pico/65keys/config.h b/keyboards/pico/65keys/config.h index 7506090b1e..50bfb15d21 100644 --- a/keyboards/pico/65keys/config.h +++ b/keyboards/pico/65keys/config.h @@ -21,8 +21,6 @@ /* Locking resynchronize hack */ #define LOCKING_RESYNC_ENABLE -#undef RGBLED_NUM -#define RGBLED_NUM 14 // Number of LEDs #define RGBLIGHT_EFFECT_BREATHING #define RGBLIGHT_EFFECT_RAINBOW_MOOD #define RGBLIGHT_EFFECT_RAINBOW_SWIRL @@ -33,9 +31,6 @@ #define RGBLIGHT_EFFECT_RGB_TEST #define RGBLIGHT_EFFECT_ALTERNATING #define RGBLIGHT_EFFECT_TWINKLE -#define RGBLIGHT_HUE_STEP 8 -#define RGBLIGHT_SAT_STEP 8 -#define RGBLIGHT_VAL_STEP 8 /* * Feature disable options diff --git a/keyboards/pico/65keys/info.json b/keyboards/pico/65keys/info.json index c9d61fc434..cba6e9d0c4 100644 --- a/keyboards/pico/65keys/info.json +++ b/keyboards/pico/65keys/info.json @@ -16,6 +16,11 @@ "split": { "soft_serial_pin": "D0" }, + "rgblight": { + "saturation_steps": 8, + "brightness_steps": 8, + "led_count": 14 + }, "ws2812": { "pin": "D3" }, diff --git a/keyboards/pico/70keys/config.h b/keyboards/pico/70keys/config.h index 7506090b1e..50bfb15d21 100644 --- a/keyboards/pico/70keys/config.h +++ b/keyboards/pico/70keys/config.h @@ -21,8 +21,6 @@ /* Locking resynchronize hack */ #define LOCKING_RESYNC_ENABLE -#undef RGBLED_NUM -#define RGBLED_NUM 14 // Number of LEDs #define RGBLIGHT_EFFECT_BREATHING #define RGBLIGHT_EFFECT_RAINBOW_MOOD #define RGBLIGHT_EFFECT_RAINBOW_SWIRL @@ -33,9 +31,6 @@ #define RGBLIGHT_EFFECT_RGB_TEST #define RGBLIGHT_EFFECT_ALTERNATING #define RGBLIGHT_EFFECT_TWINKLE -#define RGBLIGHT_HUE_STEP 8 -#define RGBLIGHT_SAT_STEP 8 -#define RGBLIGHT_VAL_STEP 8 /* * Feature disable options diff --git a/keyboards/pico/70keys/info.json b/keyboards/pico/70keys/info.json index 09c1cfa5b3..b704a422a6 100644 --- a/keyboards/pico/70keys/info.json +++ b/keyboards/pico/70keys/info.json @@ -16,6 +16,11 @@ "split": { "soft_serial_pin": "D0" }, + "rgblight": { + "saturation_steps": 8, + "brightness_steps": 8, + "led_count": 14 + }, "ws2812": { "pin": "D3" }, diff --git a/keyboards/picolab/frusta_fundamental/config.h b/keyboards/picolab/frusta_fundamental/config.h index 1bd318c9ad..ebb4d759a4 100644 --- a/keyboards/picolab/frusta_fundamental/config.h +++ b/keyboards/picolab/frusta_fundamental/config.h @@ -32,7 +32,3 @@ # define RGBLIGHT_EFFECT_RGB_TEST # define RGBLIGHT_EFFECT_ALTERNATING # define RGBLIGHT_EFFECT_TWINKLE -# define RGBLED_NUM 67 -# define RGBLIGHT_HUE_STEP 8 -# define RGBLIGHT_SAT_STEP 8 -# define RGBLIGHT_VAL_STEP 8 diff --git a/keyboards/picolab/frusta_fundamental/info.json b/keyboards/picolab/frusta_fundamental/info.json index 91aadda6ff..8885e77160 100644 --- a/keyboards/picolab/frusta_fundamental/info.json +++ b/keyboards/picolab/frusta_fundamental/info.json @@ -8,6 +8,11 @@ "pid": "0x0001", "device_version": "0.0.1" }, + "rgblight": { + "saturation_steps": 8, + "brightness_steps": 8, + "led_count": 67 + }, "ws2812": { "pin": "B0" }, diff --git a/keyboards/pimentoso/touhoupad/config.h b/keyboards/pimentoso/touhoupad/config.h index c4b29301c3..83b4c08c26 100644 --- a/keyboards/pimentoso/touhoupad/config.h +++ b/keyboards/pimentoso/touhoupad/config.h @@ -15,11 +15,6 @@ */ #pragma once - #define RGBLED_NUM 12 - #define RGBLIGHT_HUE_STEP 8 - #define RGBLIGHT_SAT_STEP 8 - #define RGBLIGHT_VAL_STEP 8 - #define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */ #define RGBLIGHT_EFFECT_BREATHING #define RGBLIGHT_EFFECT_RAINBOW_MOOD #define RGBLIGHT_EFFECT_RAINBOW_SWIRL diff --git a/keyboards/pimentoso/touhoupad/info.json b/keyboards/pimentoso/touhoupad/info.json index 4e35191761..eb3f73a751 100644 --- a/keyboards/pimentoso/touhoupad/info.json +++ b/keyboards/pimentoso/touhoupad/info.json @@ -8,6 +8,12 @@ "pid": "0x0031", "device_version": "0.0.1" }, + "rgblight": { + "saturation_steps": 8, + "brightness_steps": 8, + "led_count": 12, + "sleep": true + }, "ws2812": { "pin": "F4" }, diff --git a/keyboards/pixelspace/capsule65i/config.h b/keyboards/pixelspace/capsule65i/config.h index c6dd26a46a..d040080560 100644 --- a/keyboards/pixelspace/capsule65i/config.h +++ b/keyboards/pixelspace/capsule65i/config.h @@ -26,7 +26,3 @@ #define RGBLIGHT_EFFECT_RGB_TEST #define RGBLIGHT_EFFECT_ALTERNATING #define RGBLIGHT_EFFECT_TWINKLE -#define RGBLED_NUM 6 -#define RGBLIGHT_HUE_STEP 8 -#define RGBLIGHT_SAT_STEP 8 -#define RGBLIGHT_VAL_STEP 8 diff --git a/keyboards/pixelspace/capsule65i/info.json b/keyboards/pixelspace/capsule65i/info.json index b2ac8f8528..f304318e06 100644 --- a/keyboards/pixelspace/capsule65i/info.json +++ b/keyboards/pixelspace/capsule65i/info.json @@ -16,6 +16,11 @@ "indicators": { "caps_lock": "F6" }, + "rgblight": { + "saturation_steps": 8, + "brightness_steps": 8, + "led_count": 6 + }, "ws2812": { "pin": "F7" }, diff --git a/keyboards/planck/ez/config.h b/keyboards/planck/ez/config.h index 3b10a2b753..7cfc65d509 100644 --- a/keyboards/planck/ez/config.h +++ b/keyboards/planck/ez/config.h @@ -42,7 +42,6 @@ //#define NO_ACTION_ONESHOT // #define WS2812_LED_N 2 -// #define RGBLED_NUM WS2812_LED_N // #define WS2812_TIM_N 2 // #define WS2812_TIM_CH 2 // #define PORT_WS2812 GPIOA @@ -111,8 +110,6 @@ #define ENABLE_RGB_MATRIX_SOLID_SPLASH #define ENABLE_RGB_MATRIX_SOLID_MULTISPLASH -#define TAPPING_TOGGLE 1 - #define MOUSEKEY_INTERVAL 20 #define MOUSEKEY_DELAY 0 #define MOUSEKEY_TIME_TO_MAX 60 diff --git a/keyboards/planck/ez/info.json b/keyboards/planck/ez/info.json index 370a19357f..0bb9d35ca2 100644 --- a/keyboards/planck/ez/info.json +++ b/keyboards/planck/ez/info.json @@ -21,6 +21,9 @@ }, "processor": "STM32F303", "bootloader": "stm32-dfu", + "tapping": { + "toggle": 1 + }, "community_layouts": ["ortho_4x12", "planck_mit"], "layout_aliases": { "LAYOUT_planck_grid": "LAYOUT_ortho_4x12", diff --git a/keyboards/planck/keymaps/altgr/common/init.h b/keyboards/planck/keymaps/altgr/common/init.h index 6366a19f65..6d0b4392fb 100644 --- a/keyboards/planck/keymaps/altgr/common/init.h +++ b/keyboards/planck/keymaps/altgr/common/init.h @@ -13,21 +13,22 @@ void matrix_init_user(void) #ifdef AUDIO_ENABLE #ifdef BACKLIGHT_ENABLE -void led_set_user(uint8_t usb_led) +bool led_update_user(led_t led_state) { - static uint8_t old_usb_led = 0; + static led_t old_led_state = {0}; _delay_ms(10); // gets rid of tick if (!is_playing_notes()) { - if ((usb_led & (1<<USB_LED_CAPS_LOCK)) && !(old_usb_led & (1<<USB_LED_CAPS_LOCK))) { + if (led_state.caps_lock && !old_led_state.caps_lock) { // if capslock LED is turning on PLAY_SONG(song_caps_on); } - else if (!(usb_led & (1<<USB_LED_CAPS_LOCK)) && (old_usb_led & (1<<USB_LED_CAPS_LOCK))) { + else if (!led_state.caps_lock && old_led_state.caps_lock) { // if capslock LED is turning off PLAY_SONG(song_caps_off); } } - old_usb_led = usb_led; + old_led_state = led_state; + return false; } #endif diff --git a/keyboards/planck/keymaps/hiea/common/init.h b/keyboards/planck/keymaps/hiea/common/init.h index 6366a19f65..6d0b4392fb 100644 --- a/keyboards/planck/keymaps/hiea/common/init.h +++ b/keyboards/planck/keymaps/hiea/common/init.h @@ -13,21 +13,22 @@ void matrix_init_user(void) #ifdef AUDIO_ENABLE #ifdef BACKLIGHT_ENABLE -void led_set_user(uint8_t usb_led) +bool led_update_user(led_t led_state) { - static uint8_t old_usb_led = 0; + static led_t old_led_state = {0}; _delay_ms(10); // gets rid of tick if (!is_playing_notes()) { - if ((usb_led & (1<<USB_LED_CAPS_LOCK)) && !(old_usb_led & (1<<USB_LED_CAPS_LOCK))) { + if (led_state.caps_lock && !old_led_state.caps_lock) { // if capslock LED is turning on PLAY_SONG(song_caps_on); } - else if (!(usb_led & (1<<USB_LED_CAPS_LOCK)) && (old_usb_led & (1<<USB_LED_CAPS_LOCK))) { + else if (!led_state.caps_lock && old_led_state.caps_lock) { // if capslock LED is turning off PLAY_SONG(song_caps_off); } } - old_usb_led = usb_led; + old_led_state = led_state; + return false; } #endif diff --git a/keyboards/planck/keymaps/hieax/common/init.h b/keyboards/planck/keymaps/hieax/common/init.h index 6366a19f65..6d0b4392fb 100644 --- a/keyboards/planck/keymaps/hieax/common/init.h +++ b/keyboards/planck/keymaps/hieax/common/init.h @@ -13,21 +13,22 @@ void matrix_init_user(void) #ifdef AUDIO_ENABLE #ifdef BACKLIGHT_ENABLE -void led_set_user(uint8_t usb_led) +bool led_update_user(led_t led_state) { - static uint8_t old_usb_led = 0; + static led_t old_led_state = {0}; _delay_ms(10); // gets rid of tick if (!is_playing_notes()) { - if ((usb_led & (1<<USB_LED_CAPS_LOCK)) && !(old_usb_led & (1<<USB_LED_CAPS_LOCK))) { + if (led_state.caps_lock && !old_led_state.caps_lock) { // if capslock LED is turning on PLAY_SONG(song_caps_on); } - else if (!(usb_led & (1<<USB_LED_CAPS_LOCK)) && (old_usb_led & (1<<USB_LED_CAPS_LOCK))) { + else if (!led_state.caps_lock && old_led_state.caps_lock) { // if capslock LED is turning off PLAY_SONG(song_caps_off); } } - old_usb_led = usb_led; + old_led_state = led_state; + return false; } #endif diff --git a/keyboards/planck/keymaps/mwpeterson/keymap.c b/keyboards/planck/keymaps/mwpeterson/keymap.c index 5871fe4bfe..065750434f 100644 --- a/keyboards/planck/keymaps/mwpeterson/keymap.c +++ b/keyboards/planck/keymaps/mwpeterson/keymap.c @@ -102,7 +102,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { [LOWER_LAYER] = LAYOUT_planck_grid( KC_GRV, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, S(KC_3), _______, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, _______, - _______, KC_MINS, KC_PLUS, KC_GRV, SFT_INS, KC_COLN, KC_PIPE, X(IBANG), KC_COMM, KC_DOT, KC_BSLS, _______, + _______, KC_MINS, KC_PLUS, KC_GRV, SFT_INS, KC_COLN, KC_PIPE, UM(IBANG), KC_COMM, KC_DOT, KC_BSLS, _______, _______, _______, _______, _______, _______, KC_BSPC, KC_BSPC, _______, _______, _______, _______, _______ ), diff --git a/keyboards/planck/keymaps/rootiest/keymap.c b/keyboards/planck/keymaps/rootiest/keymap.c index 7e3b8af367..d6e8c7ef0f 100644 --- a/keyboards/planck/keymaps/rootiest/keymap.c +++ b/keyboards/planck/keymaps/rootiest/keymap.c @@ -1527,7 +1527,7 @@ void scap_finished(tap_dance_state_t* state, void* user_data) { register_code(KC_LSFT); break; default: - if (host_keyboard_leds() & (1 << USB_LED_CAPS_LOCK)) { + if (host_keyboard_led_state().caps_lock) { tap_code(KC_CAPS); reset_tap_dance(state); break; diff --git a/keyboards/planck/keymaps/sdothum/common/init.h b/keyboards/planck/keymaps/sdothum/common/init.h index 6366a19f65..6d0b4392fb 100644 --- a/keyboards/planck/keymaps/sdothum/common/init.h +++ b/keyboards/planck/keymaps/sdothum/common/init.h @@ -13,21 +13,22 @@ void matrix_init_user(void) #ifdef AUDIO_ENABLE #ifdef BACKLIGHT_ENABLE -void led_set_user(uint8_t usb_led) +bool led_update_user(led_t led_state) { - static uint8_t old_usb_led = 0; + static led_t old_led_state = {0}; _delay_ms(10); // gets rid of tick if (!is_playing_notes()) { - if ((usb_led & (1<<USB_LED_CAPS_LOCK)) && !(old_usb_led & (1<<USB_LED_CAPS_LOCK))) { + if (led_state.caps_lock && !old_led_state.caps_lock) { // if capslock LED is turning on PLAY_SONG(song_caps_on); } - else if (!(usb_led & (1<<USB_LED_CAPS_LOCK)) && (old_usb_led & (1<<USB_LED_CAPS_LOCK))) { + else if (!led_state.caps_lock && old_led_state.caps_lock) { // if capslock LED is turning off PLAY_SONG(song_caps_off); } } - old_usb_led = usb_led; + old_led_state = led_state; + return false; } #endif diff --git a/keyboards/planck/keymaps/vaire/keymap.c b/keyboards/planck/keymaps/vaire/keymap.c index 05f7f4a520..f58486cda8 100644 --- a/keyboards/planck/keymaps/vaire/keymap.c +++ b/keyboards/planck/keymaps/vaire/keymap.c @@ -80,47 +80,48 @@ void matrix_init_user(void) println("Matrix Init"); } -void led_set_user(uint8_t usb_led) +bool led_update_user(led_t led_state) { - static uint8_t old_usb_led = 0; + static led_t old_led_state = {0}; _delay_ms(10); // gets rid of tick if (!is_playing_notes()) { - if ((usb_led & (1<<USB_LED_CAPS_LOCK)) && !(old_usb_led & (1<<USB_LED_CAPS_LOCK))) + if (led_state.caps_lock && !old_led_state.caps_lock) { // If CAPS LK LED is turning on... PLAY_SONG(tone_caps_on); } - else if (!(usb_led & (1<<USB_LED_CAPS_LOCK)) && (old_usb_led & (1<<USB_LED_CAPS_LOCK))) + else if (!led_state.caps_lock && old_led_state.caps_lock) { // If CAPS LK LED is turning off... PLAY_SONG(tone_caps_off); } - else if ((usb_led & (1<<USB_LED_NUM_LOCK)) && !(old_usb_led & (1<<USB_LED_NUM_LOCK))) + else if (led_state.num_lock && !old_led_state.num_lock) { // If NUM LK LED is turning on... PLAY_SONG(tone_numlk_on); } - else if (!(usb_led & (1<<USB_LED_NUM_LOCK)) && (old_usb_led & (1<<USB_LED_NUM_LOCK))) + else if (!led_state.num_lock && old_led_state.num_lock) { // If NUM LED is turning off... PLAY_SONG(tone_numlk_off); } - else if ((usb_led & (1<<USB_LED_SCROLL_LOCK)) && !(old_usb_led & (1<<USB_LED_SCROLL_LOCK))) + else if (led_state.scroll_lock && !old_led_state.scroll_lock) { // If SCROLL LK LED is turning on... PLAY_SONG(tone_scroll_on); } - else if (!(usb_led & (1<<USB_LED_SCROLL_LOCK)) && (old_usb_led & (1<<USB_LED_SCROLL_LOCK))) + else if (!led_state.scroll_lock && old_led_state.scroll_lock) { // If SCROLL LED is turning off... PLAY_SONG(tone_scroll_off); } } - old_usb_led = usb_led; + old_led_state = led_state; + return false; } diff --git a/keyboards/planck/keymaps/zach/zach_common_functions.c b/keyboards/planck/keymaps/zach/zach_common_functions.c index 6ad1c7bed3..ae5f44e713 100644 --- a/keyboards/planck/keymaps/zach/zach_common_functions.c +++ b/keyboards/planck/keymaps/zach/zach_common_functions.c @@ -141,31 +141,31 @@ tap_dance_action_t tap_dance_actions[] = { //#ifdef UNICODE_ENABLE // Unicode shortcuts -#define IBANG X(0x203D) -#define RAROW X(0x2192) -#define LAROW X(0x2190) -#define DEGREE X(0x00B0) -#define OMEGA X(0x03A9) -#define WOMEGA X(0x03C9) -#define MICRO X(0x00B5) -#define PLUMIN X(0x00B1) -#define SUPA2 X(0x00B2) -#define ROMAN1 X(0x2160) -#define ROMAN2 X(0x2161) -#define ROMAN3 X(0x2162) -#define ROMAN4 X(0x2163) -#define ROMAN5 X(0x2164) -#define ROMAN6 X(0x2165) -#define ROMAN7 X(0x2166) -#define roman1 X(0x2170) -#define roman2 X(0x2171) -#define roman3 X(0x2172) -#define roman4 X(0x2173) -#define roman5 X(0x2174) -#define roman6 X(0x2175) -#define roman7 X(0x2176) +#define IBANG UM(0x203D) +#define RAROW UM(0x2192) +#define LAROW UM(0x2190) +#define DEGREE UM(0x00B0) +#define OMEGA UM(0x03A9) +#define WOMEGA UM(0x03C9) +#define MICRO UM(0x00B5) +#define PLUMIN UM(0x00B1) +#define SUPA2 UM(0x00B2) +#define ROMAN1 UM(0x2160) +#define ROMAN2 UM(0x2161) +#define ROMAN3 UM(0x2162) +#define ROMAN4 UM(0x2163) +#define ROMAN5 UM(0x2164) +#define ROMAN6 UM(0x2165) +#define ROMAN7 UM(0x2166) +#define roman1 UM(0x2170) +#define roman2 UM(0x2171) +#define roman3 UM(0x2172) +#define roman4 UM(0x2173) +#define roman5 UM(0x2174) +#define roman6 UM(0x2175) +#define roman7 UM(0x2176) -#ifdef UNICODEMAP_ENABLE // For Unicode characters larger than 0x8000. Send with X(<unicode>) +#ifdef UNICODEMAP_ENABLE enum Ext_Unicode{ PENGUIN = 0, BOAR, @@ -182,12 +182,12 @@ const uint32_t unicode_map[] PROGMEM = { [CHICK] = 0x1F425, [TUMBLER] = 0x1F943 }; -#define PENGY X(PENGUIN) -#define BOARY X(BOAR) -#define MNKY X(MONKEY) -#define DRGN X(DRAGON) -#define DUCK X(CHICK) -#define TMBL X(TUMBLER) +#define PENGY UM(PENGUIN) +#define BOARY UM(BOAR) +#define MNKY UM(MONKEY) +#define DRGN UM(DRAGON) +#define DUCK UM(CHICK) +#define TMBL UM(TUMBLER) #endif //#endif diff --git a/keyboards/planck/rev6/config.h b/keyboards/planck/rev6/config.h index 1d029dae69..c0c8dc2c55 100644 --- a/keyboards/planck/rev6/config.h +++ b/keyboards/planck/rev6/config.h @@ -45,8 +45,7 @@ /* * WS2812 Underglow Matrix options */ -#define RGBLED_NUM 9 -#define RGB_MATRIX_LED_COUNT RGBLED_NUM +#define RGB_MATRIX_LED_COUNT 9 #define WS2812_PWM_DRIVER PWMD2 #define WS2812_PWM_CHANNEL 2 diff --git a/keyboards/planck/rev6/info.json b/keyboards/planck/rev6/info.json index c1e4e527ce..ac0691721c 100644 --- a/keyboards/planck/rev6/info.json +++ b/keyboards/planck/rev6/info.json @@ -8,6 +8,9 @@ "pid": "0xA4F9", "device_version": "0.0.6" }, + "rgblight": { + "led_count": 9 + }, "ws2812": { "pin": "A1", "driver": "pwm" diff --git a/keyboards/planck/rev6_drop/config.h b/keyboards/planck/rev6_drop/config.h index ff15e9628d..7050fa009c 100644 --- a/keyboards/planck/rev6_drop/config.h +++ b/keyboards/planck/rev6_drop/config.h @@ -46,8 +46,7 @@ /* * WS2812 Underglow Matrix options */ -#define RGBLED_NUM 9 -#define RGB_MATRIX_LED_COUNT RGBLED_NUM +#define RGB_MATRIX_LED_COUNT 9 #define WS2812_PWM_DRIVER PWMD2 #define WS2812_PWM_CHANNEL 2 diff --git a/keyboards/planck/rev6_drop/info.json b/keyboards/planck/rev6_drop/info.json index 00f1fab14e..c5450f45c0 100644 --- a/keyboards/planck/rev6_drop/info.json +++ b/keyboards/planck/rev6_drop/info.json @@ -8,6 +8,9 @@ "pid": "0xA4F9", "device_version": "0.0.6" }, + "rgblight": { + "led_count": 9 + }, "ws2812": { "pin": "A1", "driver": "pwm" diff --git a/keyboards/planck/thk/config.h b/keyboards/planck/thk/config.h index 832fb0789c..cfb88aa0eb 100644 --- a/keyboards/planck/thk/config.h +++ b/keyboards/planck/thk/config.h @@ -18,8 +18,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #pragma once -#define TAPPING_TOGGLE 3 - #define DIP_SWITCH_PINS { D0, D1, D4, D6 } // THK uses D5 for audio diff --git a/keyboards/planck/thk/info.json b/keyboards/planck/thk/info.json index e7321ba697..f62e074e68 100644 --- a/keyboards/planck/thk/info.json +++ b/keyboards/planck/thk/info.json @@ -21,6 +21,9 @@ }, "processor": "atmega32a", "bootloader": "usbasploader", + "tapping": { + "toggle": 3 + }, "layout_aliases": { "LAYOUT_planck_grid": "LAYOUT_ortho_4x12", "LAYOUT_planck_mit": "LAYOUT_planck_1x2uC" diff --git a/keyboards/playkbtw/ca66/config.h b/keyboards/playkbtw/ca66/config.h index 9bcb20ae88..d702489ee7 100644 --- a/keyboards/playkbtw/ca66/config.h +++ b/keyboards/playkbtw/ca66/config.h @@ -16,7 +16,3 @@ #define RGBLIGHT_EFFECT_RGB_TEST #define RGBLIGHT_EFFECT_ALTERNATING #define RGBLIGHT_EFFECT_TWINKLE -#define RGBLED_NUM 6 -#define RGBLIGHT_HUE_STEP 8 -#define RGBLIGHT_SAT_STEP 8 -#define RGBLIGHT_VAL_STEP 8 diff --git a/keyboards/playkbtw/ca66/info.json b/keyboards/playkbtw/ca66/info.json index 828d5337b2..3f9538f31c 100644 --- a/keyboards/playkbtw/ca66/info.json +++ b/keyboards/playkbtw/ca66/info.json @@ -16,6 +16,11 @@ "backlight": { "pin": "F0" }, + "rgblight": { + "saturation_steps": 8, + "brightness_steps": 8, + "led_count": 6 + }, "ws2812": { "pin": "B1" }, diff --git a/keyboards/playkbtw/ca66/keymaps/olivia/keymap.c b/keyboards/playkbtw/ca66/keymaps/olivia/keymap.c index 9b441a8892..8ef6c0499d 100644 --- a/keyboards/playkbtw/ca66/keymaps/olivia/keymap.c +++ b/keyboards/playkbtw/ca66/keymaps/olivia/keymap.c @@ -17,20 +17,11 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS), }; -void matrix_init_user(void) { -} - -void matrix_scan_user(void) { -} - -bool process_record_user(uint16_t keycode, keyrecord_t *record) { - return true; -} - -void led_set_user(uint8_t usb_led) { - if (usb_led & (1 << USB_LED_CAPS_LOCK)) { +bool led_update_user(led_t led_state) { + if (led_state.caps_lock) { DDRD |= (1 << 1); PORTD &= ~(1 << 1); } else { DDRD &= ~(1 << 1); PORTD &= ~(1 << 1); } + return false; } diff --git a/keyboards/playkbtw/helen80/config.h b/keyboards/playkbtw/helen80/config.h index 57840935b6..130ef4a147 100644 --- a/keyboards/playkbtw/helen80/config.h +++ b/keyboards/playkbtw/helen80/config.h @@ -16,11 +16,6 @@ #pragma once - #define RGBLED_NUM 87 - #define RGBLIGHT_HUE_STEP 8 - #define RGBLIGHT_SAT_STEP 8 - #define RGBLIGHT_VAL_STEP 8 - #define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */ #define RGBLIGHT_EFFECT_BREATHING #define RGBLIGHT_EFFECT_RAINBOW_MOOD #define RGBLIGHT_EFFECT_RAINBOW_SWIRL diff --git a/keyboards/playkbtw/helen80/info.json b/keyboards/playkbtw/helen80/info.json index 7e568e6ed8..2fecd2b4cf 100644 --- a/keyboards/playkbtw/helen80/info.json +++ b/keyboards/playkbtw/helen80/info.json @@ -22,7 +22,11 @@ "pin": "E2" }, "rgblight": { - "max_brightness": 180 + "saturation_steps": 8, + "brightness_steps": 8, + "led_count": 87, + "max_brightness": 180, + "sleep": true }, "processor": "atmega32u4", "bootloader": "atmel-dfu", diff --git a/keyboards/playkbtw/pk60/config.h b/keyboards/playkbtw/pk60/config.h index 8471167fcd..d702489ee7 100644 --- a/keyboards/playkbtw/pk60/config.h +++ b/keyboards/playkbtw/pk60/config.h @@ -16,7 +16,3 @@ #define RGBLIGHT_EFFECT_RGB_TEST #define RGBLIGHT_EFFECT_ALTERNATING #define RGBLIGHT_EFFECT_TWINKLE -#define RGBLED_NUM 12 -#define RGBLIGHT_HUE_STEP 8 -#define RGBLIGHT_SAT_STEP 8 -#define RGBLIGHT_VAL_STEP 8 diff --git a/keyboards/playkbtw/pk60/info.json b/keyboards/playkbtw/pk60/info.json index 89b414d08f..2ef92c7b26 100644 --- a/keyboards/playkbtw/pk60/info.json +++ b/keyboards/playkbtw/pk60/info.json @@ -17,6 +17,11 @@ "pin": "B7", "levels": 5 }, + "rgblight": { + "saturation_steps": 8, + "brightness_steps": 8, + "led_count": 12 + }, "ws2812": { "pin": "E2" }, diff --git a/keyboards/playkbtw/pk60/keymaps/default/keymap.c b/keyboards/playkbtw/pk60/keymaps/default/keymap.c index 65d3996a85..cc0276673a 100644 --- a/keyboards/playkbtw/pk60/keymaps/default/keymap.c +++ b/keyboards/playkbtw/pk60/keymaps/default/keymap.c @@ -20,12 +20,13 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { }; -void led_set_user(uint8_t usb_led) { - if (usb_led & (1 << USB_LED_CAPS_LOCK)) { +bool led_update_user(led_t led_state) { + if (led_state.caps_lock) { setPinOutput(F4); writePinLow(F4); } else { setPinInput(F4); writePinLow(F4); } + return false; } diff --git a/keyboards/playkbtw/pk64rgb/config.h b/keyboards/playkbtw/pk64rgb/config.h index 3b2087c5b8..d9c5c81fdf 100644 --- a/keyboards/playkbtw/pk64rgb/config.h +++ b/keyboards/playkbtw/pk64rgb/config.h @@ -49,11 +49,6 @@ # define RGBLIGHT_EFFECT_STATIC_GRADIENT // # define RGBLIGHT_EFFECT_ALTERNATING # define RGBLIGHT_EFFECT_TWINKLE -# define RGBLED_NUM 18 -# define RGBLIGHT_HUE_STEP 5 -# define RGBLIGHT_SAT_STEP 5 -# define RGBLIGHT_VAL_STEP 5 -# define RGBLIGHT_SLEEP /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ #define LOCKING_SUPPORT_ENABLE diff --git a/keyboards/playkbtw/pk64rgb/info.json b/keyboards/playkbtw/pk64rgb/info.json index 522cd248b3..b37183af53 100644 --- a/keyboards/playkbtw/pk64rgb/info.json +++ b/keyboards/playkbtw/pk64rgb/info.json @@ -16,6 +16,13 @@ "rows": ["D7", "D6", "D5", "D3", "D2"] }, "diode_direction": "COL2ROW", + "rgblight": { + "hue_steps": 5, + "saturation_steps": 5, + "brightness_steps": 5, + "led_count": 18, + "sleep": true + }, "ws2812": { "pin": "B0" }, diff --git a/keyboards/ploopyco/mouse/config.h b/keyboards/ploopyco/mouse/config.h index 62ed32840b..b774237b03 100644 --- a/keyboards/ploopyco/mouse/config.h +++ b/keyboards/ploopyco/mouse/config.h @@ -28,7 +28,6 @@ //#define NO_ACTION_TAPPING //#define NO_ACTION_ONESHOT -#define RGBLED_NUM 4 #define RGBLIGHT_EFFECT_BREATHING #define RGBLIGHT_EFFECT_RAINBOW_MOOD #define RGBLIGHT_EFFECT_RAINBOW_SWIRL diff --git a/keyboards/ploopyco/mouse/info.json b/keyboards/ploopyco/mouse/info.json index b89f82a363..ad41e9ef87 100644 --- a/keyboards/ploopyco/mouse/info.json +++ b/keyboards/ploopyco/mouse/info.json @@ -16,6 +16,7 @@ "pin": "B5" }, "rgblight": { + "led_count": 4, "max_brightness": 40 }, "processor": "atmega32u4", diff --git a/keyboards/ploopyco/trackball/rev1_005/config.h b/keyboards/ploopyco/trackball/rev1_005/config.h index e59c0a3e85..33f5b870c0 100644 --- a/keyboards/ploopyco/trackball/rev1_005/config.h +++ b/keyboards/ploopyco/trackball/rev1_005/config.h @@ -23,7 +23,6 @@ #define UNUSABLE_PINS \ { D1, D3, B4, B7, D6, C7, F6, F5, F3, F7 } -#define RGBLED_NUM 3 #define RGBLIGHT_EFFECT_BREATHING #define RGBLIGHT_EFFECT_RAINBOW_MOOD #define RGBLIGHT_EFFECT_RAINBOW_SWIRL diff --git a/keyboards/ploopyco/trackball/rev1_005/info.json b/keyboards/ploopyco/trackball/rev1_005/info.json index c7506f2d84..3588628d87 100644 --- a/keyboards/ploopyco/trackball/rev1_005/info.json +++ b/keyboards/ploopyco/trackball/rev1_005/info.json @@ -10,6 +10,7 @@ "pin": "B5" }, "rgblight": { + "led_count": 3, "max_brightness": 40 } } diff --git a/keyboards/plume/plume65/config.h b/keyboards/plume/plume65/config.h index ba11813e4e..6c1a5941cd 100644 --- a/keyboards/plume/plume65/config.h +++ b/keyboards/plume/plume65/config.h @@ -16,11 +16,6 @@ #pragma once - #define RGBLED_NUM 10 -// #define RGBLIGHT_HUE_STEP 8 -// #define RGBLIGHT_SAT_STEP 8 -// #define RGBLIGHT_VAL_STEP 8 -// #define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */ #define RGBLIGHT_EFFECT_BREATHING #define RGBLIGHT_EFFECT_RAINBOW_MOOD #define RGBLIGHT_EFFECT_RAINBOW_SWIRL diff --git a/keyboards/plume/plume65/info.json b/keyboards/plume/plume65/info.json index 3f38c555e1..aaad820427 100644 --- a/keyboards/plume/plume65/info.json +++ b/keyboards/plume/plume65/info.json @@ -8,6 +8,9 @@ "pid": "0x22CF", "device_version": "0.0.1" }, + "rgblight": { + "led_count": 10 + }, "ws2812": { "pin": "B0" }, diff --git a/keyboards/plut0nium/0x3e/config.h b/keyboards/plut0nium/0x3e/config.h index 67d2105ef7..0555a74b55 100644 --- a/keyboards/plut0nium/0x3e/config.h +++ b/keyboards/plut0nium/0x3e/config.h @@ -20,11 +20,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. /* * RGB Underglow */ - #define RGBLED_NUM 6 - #define RGBLIGHT_HUE_STEP 12 - #define RGBLIGHT_SAT_STEP 8 - #define RGBLIGHT_VAL_STEP 8 - #define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */ #define RGBLIGHT_EFFECT_BREATHING #define RGBLIGHT_EFFECT_RAINBOW_MOOD // #define RGBLIGHT_EFFECT_RAINBOW_SWIRL diff --git a/keyboards/plut0nium/0x3e/info.json b/keyboards/plut0nium/0x3e/info.json index 9ae1bcca07..ef02cc4d44 100644 --- a/keyboards/plut0nium/0x3e/info.json +++ b/keyboards/plut0nium/0x3e/info.json @@ -22,7 +22,12 @@ "pin": "C7" }, "rgblight": { - "max_brightness": 150 + "hue_steps": 12, + "saturation_steps": 8, + "brightness_steps": 8, + "led_count": 6, + "max_brightness": 150, + "sleep": true }, "processor": "atmega32u4", "bootloader": "atmel-dfu", diff --git a/keyboards/plut0nium/0x3e/keymaps/default/keymap.c b/keyboards/plut0nium/0x3e/keymaps/default/keymap.c index 0b4c26369d..a906ebd24e 100644 --- a/keyboards/plut0nium/0x3e/keymaps/default/keymap.c +++ b/keyboards/plut0nium/0x3e/keymaps/default/keymap.c @@ -136,14 +136,6 @@ bool oled_task_user(void) { oled_write_ln_P(PSTR("Undf"), false); } - // Host Keyboard LED Status - // uint8_t led_usb_state = host_keyboard_leds(); - // oled_write_P(PSTR("-----"), false); - // oled_write_P(PSTR("Stats"), false); - // oled_write_P(led_usb_state & (1<<USB_LED_NUM_LOCK) ? PSTR("num:*") : PSTR("num:."), false); - // oled_write_P(led_usb_state & (1<<USB_LED_CAPS_LOCK) ? PSTR("cap:*") : PSTR("cap:."), false); - // oled_write_P(led_usb_state & (1<<USB_LED_SCROLL_LOCK) ? PSTR("scr:*") : PSTR("scr:."), false); - oled_write_P(PSTR("-----"), false); render_backlight_status(); diff --git a/keyboards/plywrks/lune/config.h b/keyboards/plywrks/lune/config.h index 50f82aeac9..2a8eb9dde1 100644 --- a/keyboards/plywrks/lune/config.h +++ b/keyboards/plywrks/lune/config.h @@ -17,11 +17,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #pragma once -# define RGBLED_NUM 8 -//# define RGBLIGHT_HUE_STEP 8 -//# define RGBLIGHT_SAT_STEP 8 -//# define RGBLIGHT_VAL_STEP 8 -//# define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */ #define RGBLIGHT_EFFECT_BREATHING #define RGBLIGHT_EFFECT_RAINBOW_MOOD #define RGBLIGHT_EFFECT_RAINBOW_SWIRL diff --git a/keyboards/plywrks/lune/info.json b/keyboards/plywrks/lune/info.json index 0804c27c1c..adb2f528e6 100644 --- a/keyboards/plywrks/lune/info.json +++ b/keyboards/plywrks/lune/info.json @@ -8,6 +8,9 @@ "pid": "0x7901", "device_version": "0.0.1" }, + "rgblight": { + "led_count": 8 + }, "ws2812": { "pin": "E2" }, diff --git a/keyboards/pohjolaworks/louhi/config.h b/keyboards/pohjolaworks/louhi/config.h index ee3792928a..9dbdc01050 100644 --- a/keyboards/pohjolaworks/louhi/config.h +++ b/keyboards/pohjolaworks/louhi/config.h @@ -17,12 +17,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #pragma once -# define RGBLED_NUM 14 -# define RGBLIGHT_HUE_STEP 8 -# define RGBLIGHT_SAT_STEP 8 -# define RGBLIGHT_VAL_STEP 8 -//# define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */ - /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ #define LOCKING_SUPPORT_ENABLE /* Locking resynchronize hack */ diff --git a/keyboards/pohjolaworks/louhi/info.json b/keyboards/pohjolaworks/louhi/info.json index 39674dc1ba..618d46b9c8 100644 --- a/keyboards/pohjolaworks/louhi/info.json +++ b/keyboards/pohjolaworks/louhi/info.json @@ -22,6 +22,9 @@ "pin": "B5" }, "rgblight": { + "saturation_steps": 8, + "brightness_steps": 8, + "led_count": 14, "max_brightness": 230 }, "processor": "atmega32u4", diff --git a/keyboards/poker87c/config.h b/keyboards/poker87c/config.h index b91aa11bd7..31b67e1fb8 100644 --- a/keyboards/poker87c/config.h +++ b/keyboards/poker87c/config.h @@ -16,11 +16,6 @@ #pragma once - #define RGBLED_NUM 95 - #define RGBLIGHT_HUE_STEP 8 - #define RGBLIGHT_SAT_STEP 8 - #define RGBLIGHT_VAL_STEP 8 - #define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */ #define RGBLIGHT_EFFECT_BREATHING #define RGBLIGHT_EFFECT_RAINBOW_MOOD #define RGBLIGHT_EFFECT_RAINBOW_SWIRL diff --git a/keyboards/poker87c/info.json b/keyboards/poker87c/info.json index f987bb5b05..1bf10da6d5 100644 --- a/keyboards/poker87c/info.json +++ b/keyboards/poker87c/info.json @@ -20,7 +20,11 @@ "pin": "E2" }, "rgblight": { - "max_brightness": 180 + "saturation_steps": 8, + "brightness_steps": 8, + "led_count": 95, + "max_brightness": 180, + "sleep": true }, "indicators": { "caps_lock": "B3", diff --git a/keyboards/poker87d/config.h b/keyboards/poker87d/config.h index 35d54817f7..31b67e1fb8 100644 --- a/keyboards/poker87d/config.h +++ b/keyboards/poker87d/config.h @@ -16,11 +16,6 @@ #pragma once - #define RGBLED_NUM 125 - #define RGBLIGHT_HUE_STEP 8 - #define RGBLIGHT_SAT_STEP 8 - #define RGBLIGHT_VAL_STEP 8 - #define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */ #define RGBLIGHT_EFFECT_BREATHING #define RGBLIGHT_EFFECT_RAINBOW_MOOD #define RGBLIGHT_EFFECT_RAINBOW_SWIRL diff --git a/keyboards/poker87d/info.json b/keyboards/poker87d/info.json index 3e0ea91fdc..52440fec9f 100644 --- a/keyboards/poker87d/info.json +++ b/keyboards/poker87d/info.json @@ -25,7 +25,11 @@ "pin": "E2" }, "rgblight": { - "max_brightness": 180 + "saturation_steps": 8, + "brightness_steps": 8, + "led_count": 125, + "max_brightness": 180, + "sleep": true }, "processor": "atmega32u4", "bootloader": "atmel-dfu", diff --git a/keyboards/polycarbdiet/s20/config.h b/keyboards/polycarbdiet/s20/config.h index 61969b945f..a50e580f3d 100644 --- a/keyboards/polycarbdiet/s20/config.h +++ b/keyboards/polycarbdiet/s20/config.h @@ -16,12 +16,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #pragma once -#define RGBLED_NUM 4 -#define RGBLIGHT_HUE_STEP 8 -#define RGBLIGHT_SAT_STEP 8 -#define RGBLIGHT_VAL_STEP 8 -#define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */ - #define RGBLIGHT_EFFECT_BREATHING #define RGBLIGHT_EFFECT_RAINBOW_MOOD #define RGBLIGHT_EFFECT_RAINBOW_SWIRL diff --git a/keyboards/polycarbdiet/s20/info.json b/keyboards/polycarbdiet/s20/info.json index aeb5427589..6202bb4915 100644 --- a/keyboards/polycarbdiet/s20/info.json +++ b/keyboards/polycarbdiet/s20/info.json @@ -18,6 +18,12 @@ "pin": "B6", "breathing": true }, + "rgblight": { + "saturation_steps": 8, + "brightness_steps": 8, + "led_count": 4, + "sleep": true + }, "ws2812": { "pin": "B3" }, diff --git a/keyboards/pom_keyboards/tnln95/config.h b/keyboards/pom_keyboards/tnln95/config.h index 4c85d73c7a..c0c679faf7 100644 --- a/keyboards/pom_keyboards/tnln95/config.h +++ b/keyboards/pom_keyboards/tnln95/config.h @@ -22,7 +22,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #define LOCKING_RESYNC_ENABLE /* RGB Configs */ - #define RGBLED_NUM 14 #define RGBLIGHT_EFFECT_BREATHING #define RGBLIGHT_EFFECT_RAINBOW_MOOD #define RGBLIGHT_EFFECT_RAINBOW_SWIRL @@ -34,10 +33,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #define RGBLIGHT_EFFECT_ALTERNATING #define RGBLIGHT_EFFECT_TWINKLE - #define RGBLIGHT_HUE_STEP 8 - #define RGBLIGHT_SAT_STEP 8 - #define RGBLIGHT_VAL_STEP 8 - #define RGBLIGHT_SLEEP // RGB will turn off when PC is put to sleep // #define RGB_MATRIX_LED_PROCESS_LIMIT (RGB_MATRIX_LED_COUNT + 4) / 5 // limits the number of LEDs to process in an animation per task run (increases keyboard responsiveness) // #define RGB_MATRIX_LED_FLUSH_LIMIT 16 // limits in milliseconds how frequently an animation will update the LEDs. 16 (16ms) is equivalent to limiting to 60fps (increases keyboard responsiveness) // #define RGB_MATRIX_MAXIMUM_BRIGHTNESS 225 // limits maximum brightness of LEDs to 200 out of 255. If not defined maximum brightness is set to 255 diff --git a/keyboards/pom_keyboards/tnln95/info.json b/keyboards/pom_keyboards/tnln95/info.json index 02f8ac7927..69849be644 100644 --- a/keyboards/pom_keyboards/tnln95/info.json +++ b/keyboards/pom_keyboards/tnln95/info.json @@ -18,6 +18,12 @@ "levels": 10, "breathing": true }, + "rgblight": { + "saturation_steps": 8, + "brightness_steps": 8, + "led_count": 14, + "sleep": true + }, "ws2812": { "pin": "C7" }, diff --git a/keyboards/preonic/keymaps/zach/zach_common_functions.c b/keyboards/preonic/keymaps/zach/zach_common_functions.c index 6ad1c7bed3..ae5f44e713 100644 --- a/keyboards/preonic/keymaps/zach/zach_common_functions.c +++ b/keyboards/preonic/keymaps/zach/zach_common_functions.c @@ -141,31 +141,31 @@ tap_dance_action_t tap_dance_actions[] = { //#ifdef UNICODE_ENABLE // Unicode shortcuts -#define IBANG X(0x203D) -#define RAROW X(0x2192) -#define LAROW X(0x2190) -#define DEGREE X(0x00B0) -#define OMEGA X(0x03A9) -#define WOMEGA X(0x03C9) -#define MICRO X(0x00B5) -#define PLUMIN X(0x00B1) -#define SUPA2 X(0x00B2) -#define ROMAN1 X(0x2160) -#define ROMAN2 X(0x2161) -#define ROMAN3 X(0x2162) -#define ROMAN4 X(0x2163) -#define ROMAN5 X(0x2164) -#define ROMAN6 X(0x2165) -#define ROMAN7 X(0x2166) -#define roman1 X(0x2170) -#define roman2 X(0x2171) -#define roman3 X(0x2172) -#define roman4 X(0x2173) -#define roman5 X(0x2174) -#define roman6 X(0x2175) -#define roman7 X(0x2176) +#define IBANG UM(0x203D) +#define RAROW UM(0x2192) +#define LAROW UM(0x2190) +#define DEGREE UM(0x00B0) +#define OMEGA UM(0x03A9) +#define WOMEGA UM(0x03C9) +#define MICRO UM(0x00B5) +#define PLUMIN UM(0x00B1) +#define SUPA2 UM(0x00B2) +#define ROMAN1 UM(0x2160) +#define ROMAN2 UM(0x2161) +#define ROMAN3 UM(0x2162) +#define ROMAN4 UM(0x2163) +#define ROMAN5 UM(0x2164) +#define ROMAN6 UM(0x2165) +#define ROMAN7 UM(0x2166) +#define roman1 UM(0x2170) +#define roman2 UM(0x2171) +#define roman3 UM(0x2172) +#define roman4 UM(0x2173) +#define roman5 UM(0x2174) +#define roman6 UM(0x2175) +#define roman7 UM(0x2176) -#ifdef UNICODEMAP_ENABLE // For Unicode characters larger than 0x8000. Send with X(<unicode>) +#ifdef UNICODEMAP_ENABLE enum Ext_Unicode{ PENGUIN = 0, BOAR, @@ -182,12 +182,12 @@ const uint32_t unicode_map[] PROGMEM = { [CHICK] = 0x1F425, [TUMBLER] = 0x1F943 }; -#define PENGY X(PENGUIN) -#define BOARY X(BOAR) -#define MNKY X(MONKEY) -#define DRGN X(DRAGON) -#define DUCK X(CHICK) -#define TMBL X(TUMBLER) +#define PENGY UM(PENGUIN) +#define BOARY UM(BOAR) +#define MNKY UM(MONKEY) +#define DRGN UM(DRAGON) +#define DUCK UM(CHICK) +#define TMBL UM(TUMBLER) #endif //#endif diff --git a/keyboards/preonic/rev3/config.h b/keyboards/preonic/rev3/config.h index 2f55894ae6..53e72073b5 100644 --- a/keyboards/preonic/rev3/config.h +++ b/keyboards/preonic/rev3/config.h @@ -45,7 +45,6 @@ /* * WS2812 Underglow Matrix options */ -#define RGBLED_NUM 9 #define RGBLIGHT_EFFECT_BREATHING #define RGBLIGHT_EFFECT_RAINBOW_MOOD #define RGBLIGHT_EFFECT_RAINBOW_SWIRL @@ -57,7 +56,7 @@ #define RGBLIGHT_EFFECT_ALTERNATING #define RGBLIGHT_EFFECT_TWINKLE // RGB Matrix support -#define RGB_MATRIX_LED_COUNT RGBLED_NUM +#define RGB_MATRIX_LED_COUNT 9 #define WS2812_PWM_DRIVER PWMD2 #define WS2812_PWM_CHANNEL 2 diff --git a/keyboards/preonic/rev3/info.json b/keyboards/preonic/rev3/info.json index e69aacf144..05d9b1cbd9 100644 --- a/keyboards/preonic/rev3/info.json +++ b/keyboards/preonic/rev3/info.json @@ -6,6 +6,9 @@ "pid": "0xA649", "device_version": "0.0.3" }, + "rgblight": { + "led_count": 9 + }, "ws2812": { "pin": "A1", "driver": "pwm" diff --git a/keyboards/preonic/rev3_drop/config.h b/keyboards/preonic/rev3_drop/config.h index ac584dfbfe..fa7b87b7cd 100644 --- a/keyboards/preonic/rev3_drop/config.h +++ b/keyboards/preonic/rev3_drop/config.h @@ -45,7 +45,6 @@ /* * WS2812 Underglow Matrix options */ -#define RGBLED_NUM 9 #define RGBLIGHT_EFFECT_BREATHING #define RGBLIGHT_EFFECT_RAINBOW_MOOD #define RGBLIGHT_EFFECT_RAINBOW_SWIRL @@ -58,7 +57,7 @@ #define RGBLIGHT_EFFECT_TWINKLE // RGB Matrix support -#define RGB_MATRIX_LED_COUNT RGBLED_NUM +#define RGB_MATRIX_LED_COUNT 9 #define WS2812_PWM_DRIVER PWMD2 #define WS2812_PWM_CHANNEL 2 diff --git a/keyboards/preonic/rev3_drop/info.json b/keyboards/preonic/rev3_drop/info.json index 7e5eace3d5..f700d848bc 100644 --- a/keyboards/preonic/rev3_drop/info.json +++ b/keyboards/preonic/rev3_drop/info.json @@ -6,6 +6,9 @@ "pid": "0xA649", "device_version": "0.0.3" }, + "rgblight": { + "led_count": 9 + }, "ws2812": { "pin": "A1", "driver": "pwm" diff --git a/keyboards/primekb/meridian/config.h b/keyboards/primekb/meridian/config.h index 0633f8948e..3bb4f22006 100644 --- a/keyboards/primekb/meridian/config.h +++ b/keyboards/primekb/meridian/config.h @@ -17,7 +17,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #pragma once -#define RGBLED_NUM 3 #define WS2812_SPI SPID2 #define WS2812_SPI_MOSI_PAL_MODE 0 #define WS2812_SPI_SCK_PAL_MODE 0 diff --git a/keyboards/primekb/meridian/ktr1010/config.h b/keyboards/primekb/meridian/ktr1010/config.h index e28306587d..3da9ff72c4 100644 --- a/keyboards/primekb/meridian/ktr1010/config.h +++ b/keyboards/primekb/meridian/ktr1010/config.h @@ -17,7 +17,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #pragma once -#define RGBLED_NUM 3 // Special timing definitions for KTR101 #define WS2812_TIMING 1325 #define WS2812_T0H 350 diff --git a/keyboards/primekb/meridian/ktr1010/info.json b/keyboards/primekb/meridian/ktr1010/info.json index 3a330b7306..a9a9362ec9 100644 --- a/keyboards/primekb/meridian/ktr1010/info.json +++ b/keyboards/primekb/meridian/ktr1010/info.json @@ -1,4 +1,7 @@ { + "rgblight": { + "led_count": 3 + }, "ws2812": { "pin": "B15" } diff --git a/keyboards/primekb/meridian/rules.mk b/keyboards/primekb/meridian/rules.mk index 8b14acaf19..6d34cadbf7 100644 --- a/keyboards/primekb/meridian/rules.mk +++ b/keyboards/primekb/meridian/rules.mk @@ -11,7 +11,4 @@ BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality RGBLIGHT_ENABLE = yes # Enable keyboard RGB underglow AUDIO_ENABLE = no # Audio output -# Enter lower-power sleep mode when on the ChibiOS idle thread -OPT_DEFS += -DCORTEX_ENABLE_WFI_IDLE=TRUE - DEFAULT_FOLDER = primekb/meridian/ktr1010 diff --git a/keyboards/primekb/meridian/ws2812/config.h b/keyboards/primekb/meridian/ws2812/config.h index 0633f8948e..3bb4f22006 100644 --- a/keyboards/primekb/meridian/ws2812/config.h +++ b/keyboards/primekb/meridian/ws2812/config.h @@ -17,7 +17,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #pragma once -#define RGBLED_NUM 3 #define WS2812_SPI SPID2 #define WS2812_SPI_MOSI_PAL_MODE 0 #define WS2812_SPI_SCK_PAL_MODE 0 diff --git a/keyboards/primekb/meridian/ws2812/info.json b/keyboards/primekb/meridian/ws2812/info.json index 9870232117..4299d367c2 100644 --- a/keyboards/primekb/meridian/ws2812/info.json +++ b/keyboards/primekb/meridian/ws2812/info.json @@ -1,4 +1,7 @@ { + "rgblight": { + "led_count": 3 + }, "ws2812": { "pin": "B15", "driver": "spi" diff --git a/keyboards/primekb/meridian_rgb/config.h b/keyboards/primekb/meridian_rgb/config.h index 6e481d7778..6003927d20 100644 --- a/keyboards/primekb/meridian_rgb/config.h +++ b/keyboards/primekb/meridian_rgb/config.h @@ -17,7 +17,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #pragma once -#define RGBLED_NUM 64 #define RGBLIGHT_EFFECT_BREATHING #define RGBLIGHT_EFFECT_RAINBOW_MOOD #define RGBLIGHT_EFFECT_RAINBOW_SWIRL diff --git a/keyboards/primekb/meridian_rgb/info.json b/keyboards/primekb/meridian_rgb/info.json index c967c15811..dca8ceb8bc 100644 --- a/keyboards/primekb/meridian_rgb/info.json +++ b/keyboards/primekb/meridian_rgb/info.json @@ -22,6 +22,7 @@ "pin": "F1" }, "rgblight": { + "led_count": 64, "max_brightness": 200 }, "processor": "atmega32u4", diff --git a/keyboards/primekb/prime_e/keymaps/default/keymap.c b/keyboards/primekb/prime_e/keymaps/default/keymap.c index 08067b3132..e5e47cffc2 100644 --- a/keyboards/primekb/prime_e/keymaps/default/keymap.c +++ b/keyboards/primekb/prime_e/keymaps/default/keymap.c @@ -57,24 +57,18 @@ void matrix_init_user(void) { writePinLow(B3); } -void led_set_user(uint8_t usb_led) { - if (IS_LED_ON(usb_led, USB_LED_NUM_LOCK)) { +bool led_update_user(led_t led_state) { + if (led_state.num_lock) { writePinHigh(B2); } else { writePinLow(B2); } - if (IS_LED_ON(usb_led, USB_LED_CAPS_LOCK)) { + if (led_state.caps_lock) { writePinHigh(B1); } else { writePinLow(B1); } -/* - if (IS_LED_ON(usb_led, USB_LED_SCROLL_LOCK)) { - writePinHigh(B3); - } else { - writePinLow(B3); - }*/ - + return false; } //function for layer indicator LED diff --git a/keyboards/primekb/prime_e/keymaps/jetpacktuxedo/keymap.c b/keyboards/primekb/prime_e/keymaps/jetpacktuxedo/keymap.c index cdd1b56430..a45a841285 100644 --- a/keyboards/primekb/prime_e/keymaps/jetpacktuxedo/keymap.c +++ b/keyboards/primekb/prime_e/keymaps/jetpacktuxedo/keymap.c @@ -100,13 +100,14 @@ layer_state_t layer_state_set_user(layer_state_t state) { return state; } -void led_set_user(uint8_t usb_led) { - if (IS_LED_ON(usb_led, USB_LED_CAPS_LOCK)) { +bool led_update_user(led_t led_state) { + if (led_state.caps_lock) { CAPS = 1; } else { CAPS = 0; } + return false; } void togg_indicator(uint8_t *state, uint8_t pin) { diff --git a/keyboards/primekb/prime_e/keymaps/madhatter/keymap.c b/keyboards/primekb/prime_e/keymaps/madhatter/keymap.c index f3228ec0d5..998046c6d7 100644 --- a/keyboards/primekb/prime_e/keymaps/madhatter/keymap.c +++ b/keyboards/primekb/prime_e/keymaps/madhatter/keymap.c @@ -91,8 +91,9 @@ layer_state_t layer_state_set_user(layer_state_t state) { return state; } -void led_set_user(uint8_t usb_led) { - CAPS = IS_LED_ON(usb_led, USB_LED_CAPS_LOCK); +bool led_update_user(led_t led_state) { + CAPS = led_state.caps_lock; + return false; } void togg_indicator(uint8_t *state, uint8_t pin) { diff --git a/keyboards/primekb/prime_e/keymaps/via/keymap.c b/keyboards/primekb/prime_e/keymaps/via/keymap.c index 2d1d003d51..09a42b0d16 100644 --- a/keyboards/primekb/prime_e/keymaps/via/keymap.c +++ b/keyboards/primekb/prime_e/keymaps/via/keymap.c @@ -85,24 +85,18 @@ void matrix_init_user(void) { writePinLow(B3); } -void led_set_user(uint8_t usb_led) { - if (IS_LED_ON(usb_led, USB_LED_NUM_LOCK)) { +bool led_update_user(led_t led_state) { + if (led_state.num_lock) { writePinHigh(B2); } else { writePinLow(B2); } - if (IS_LED_ON(usb_led, USB_LED_CAPS_LOCK)) { + if (led_state.caps_lock) { writePinHigh(B1); } else { writePinLow(B1); } -/* - if (IS_LED_ON(usb_led, USB_LED_SCROLL_LOCK)) { - writePinHigh(B3); - } else { - writePinLow(B3); - }*/ - + return false; } //function for layer indicator LED diff --git a/keyboards/primekb/prime_e/rgb/config.h b/keyboards/primekb/prime_e/rgb/config.h index 6610d03f04..21388d69a2 100644 --- a/keyboards/primekb/prime_e/rgb/config.h +++ b/keyboards/primekb/prime_e/rgb/config.h @@ -17,7 +17,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #pragma once -#define RGBLED_NUM 8 #define RGBLIGHT_EFFECT_BREATHING #define RGBLIGHT_EFFECT_RAINBOW_MOOD #define RGBLIGHT_EFFECT_RAINBOW_SWIRL diff --git a/keyboards/primekb/prime_e/rgb/info.json b/keyboards/primekb/prime_e/rgb/info.json index 189e448ed9..5a65a70359 100644 --- a/keyboards/primekb/prime_e/rgb/info.json +++ b/keyboards/primekb/prime_e/rgb/info.json @@ -4,6 +4,9 @@ "pid": "0x0052", "device_version": "0.0.1" }, + "rgblight": { + "led_count": 8 + }, "ws2812": { "pin": "B7" } diff --git a/keyboards/primekb/prime_o/keymaps/reasonsandreasons/keymap.c b/keyboards/primekb/prime_o/keymaps/reasonsandreasons/keymap.c index 20f34ce60b..2f0290dc03 100644 --- a/keyboards/primekb/prime_o/keymaps/reasonsandreasons/keymap.c +++ b/keyboards/primekb/prime_o/keymaps/reasonsandreasons/keymap.c @@ -172,15 +172,3 @@ bool process_record_user(uint16_t keycode, keyrecord_t *record) { } return true; } - -void matrix_init_user(void) { - -} - -void matrix_scan_user(void) { - -} - -void led_set_user(uint8_t usb_led) { - -} diff --git a/keyboards/program_yoink/config.h b/keyboards/program_yoink/config.h index dfb6f078ae..1a3198d61b 100644 --- a/keyboards/program_yoink/config.h +++ b/keyboards/program_yoink/config.h @@ -18,11 +18,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #pragma once /*RGB*/ - #define RGBLED_NUM 5 - #define RGBLIGHT_HUE_STEP 8 - #define RGBLIGHT_SAT_STEP 8 - #define RGBLIGHT_VAL_STEP 8 - #define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */ //#define RGBLIGHT_EFFECT_BREATHING #define RGBLIGHT_EFFECT_RAINBOW_MOOD #define RGBLIGHT_EFFECT_RAINBOW_SWIRL diff --git a/keyboards/program_yoink/ortho/info.json b/keyboards/program_yoink/ortho/info.json index ef5492bd52..c00b0f80f7 100644 --- a/keyboards/program_yoink/ortho/info.json +++ b/keyboards/program_yoink/ortho/info.json @@ -8,6 +8,12 @@ "pid": "0xF10C", "device_version": "0.0.1" }, + "rgblight": { + "saturation_steps": 8, + "brightness_steps": 8, + "led_count": 5, + "sleep": true + }, "ws2812": { "pin": "D4" }, diff --git a/keyboards/program_yoink/staggered/info.json b/keyboards/program_yoink/staggered/info.json index 1b028593e3..dae77f5c85 100644 --- a/keyboards/program_yoink/staggered/info.json +++ b/keyboards/program_yoink/staggered/info.json @@ -8,6 +8,12 @@ "pid": "0xF10B", "device_version": "0.0.1" }, + "rgblight": { + "saturation_steps": 8, + "brightness_steps": 8, + "led_count": 5, + "sleep": true + }, "ws2812": { "pin": "D4" }, diff --git a/keyboards/projectkb/alice/rev1/config.h b/keyboards/projectkb/alice/rev1/config.h index bcb9ffbb09..7e8be8b7f8 100644 --- a/keyboards/projectkb/alice/rev1/config.h +++ b/keyboards/projectkb/alice/rev1/config.h @@ -36,7 +36,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #define RGBLIGHT_EFFECT_RGB_TEST #define RGBLIGHT_EFFECT_ALTERNATING #define RGBLIGHT_EFFECT_TWINKLE -#define RGBLED_NUM 14 #define WS2812_SPI SPID2 #define WS2812_SPI_MOSI_PAL_MODE 0 #define WS2812_SPI_SCK_PAL_MODE 0 diff --git a/keyboards/projectkb/alice/rev1/info.json b/keyboards/projectkb/alice/rev1/info.json index 4ed9926907..0564715547 100644 --- a/keyboards/projectkb/alice/rev1/info.json +++ b/keyboards/projectkb/alice/rev1/info.json @@ -1,4 +1,7 @@ { + "rgblight": { + "led_count": 14 + }, "ws2812": { "pin": "B15", "driver": "spi" diff --git a/keyboards/projectkb/alice/rev1/rules.mk b/keyboards/projectkb/alice/rev1/rules.mk index ab88066b0a..f689205b38 100644 --- a/keyboards/projectkb/alice/rev1/rules.mk +++ b/keyboards/projectkb/alice/rev1/rules.mk @@ -11,5 +11,3 @@ BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality RGBLIGHT_ENABLE = yes # Enable keyboard RGB underglow AUDIO_ENABLE = no # Audio output -# Enter lower-power sleep mode when on the ChibiOS idle thread -OPT_DEFS += -DCORTEX_ENABLE_WFI_IDLE=TRUE diff --git a/keyboards/projectkb/alice/rev2/config.h b/keyboards/projectkb/alice/rev2/config.h index 95f845c931..848c0102c2 100644 --- a/keyboards/projectkb/alice/rev2/config.h +++ b/keyboards/projectkb/alice/rev2/config.h @@ -36,7 +36,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #define RGBLIGHT_EFFECT_RGB_TEST #define RGBLIGHT_EFFECT_ALTERNATING #define RGBLIGHT_EFFECT_TWINKLE -#define RGBLED_NUM 14 #define WS2812_SPI SPID2 #define WS2812_SPI_MOSI_PAL_MODE 0 #define WS2812_SPI_SCK_PAL_MODE 0 diff --git a/keyboards/projectkb/alice/rev2/info.json b/keyboards/projectkb/alice/rev2/info.json index 57113b1e3c..6a7046652c 100644 --- a/keyboards/projectkb/alice/rev2/info.json +++ b/keyboards/projectkb/alice/rev2/info.json @@ -1,4 +1,7 @@ { + "rgblight": { + "led_count": 14 + }, "ws2812": { "pin": "B15", "driver": "spi" diff --git a/keyboards/projectkb/alice/rev2/rules.mk b/keyboards/projectkb/alice/rev2/rules.mk index ab88066b0a..f689205b38 100644 --- a/keyboards/projectkb/alice/rev2/rules.mk +++ b/keyboards/projectkb/alice/rev2/rules.mk @@ -11,5 +11,3 @@ BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality RGBLIGHT_ENABLE = yes # Enable keyboard RGB underglow AUDIO_ENABLE = no # Audio output -# Enter lower-power sleep mode when on the ChibiOS idle thread -OPT_DEFS += -DCORTEX_ENABLE_WFI_IDLE=TRUE diff --git a/keyboards/projectkb/signature65/rules.mk b/keyboards/projectkb/signature65/rules.mk index 707adf67c4..5fb302d01f 100644 --- a/keyboards/projectkb/signature65/rules.mk +++ b/keyboards/projectkb/signature65/rules.mk @@ -12,5 +12,3 @@ RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow AUDIO_ENABLE = no # Audio output -# Enter lower-power sleep mode when on the ChibiOS idle thread -OPT_DEFS += -DCORTEX_ENABLE_WFI_IDLE=TRUE diff --git a/keyboards/projectkb/signature87/rules.mk b/keyboards/projectkb/signature87/rules.mk index 06b7b460e3..a09b9d3bdf 100644 --- a/keyboards/projectkb/signature87/rules.mk +++ b/keyboards/projectkb/signature87/rules.mk @@ -9,5 +9,3 @@ COMMAND_ENABLE = yes # Commands for debug and configuration NKRO_ENABLE = yes # Enable N-Key Rollover BACKLIGHT_ENABLE = no -# Enter lower-power sleep mode when on the ChibiOS idle thread -OPT_DEFS += -DCORTEX_ENABLE_WFI_IDLE=TRUE diff --git a/keyboards/prototypist/pt60/info.json b/keyboards/prototypist/pt60/info.json index f57d28aa84..8018350e6f 100644 --- a/keyboards/prototypist/pt60/info.json +++ b/keyboards/prototypist/pt60/info.json @@ -42,7 +42,8 @@ {"matrix": [0, 12], "label": "+", "x": 12, "y": 0}, {"matrix": [0, 13], "label": "Back", "x": 13, "y": 0}, {"matrix": [2, 13], "label": "Delete", "x": 14, "y": 0}, - {"matrix": [1, 0], "label": "Tab", "w": 1.5, "x": 0, "y": 1}, + + {"matrix": [1, 0], "label": "Tab", "x": 0, "y": 1, "w": 1.5}, {"matrix": [1, 1], "label": "Q", "x": 1.5, "y": 1}, {"matrix": [1, 2], "label": "W", "x": 2.5, "y": 1}, {"matrix": [1, 3], "label": "E", "x": 3.5, "y": 1}, @@ -55,8 +56,8 @@ {"matrix": [1, 10], "label": "P", "x": 10.5, "y": 1}, {"matrix": [1, 11], "label": "{", "x": 11.5, "y": 1}, {"matrix": [1, 12], "label": "}", "x": 12.5, "y": 1}, - {"matrix": [1, 13], "h": 2, "label": "Enter", "w": 1.25, "x": 13.75, "y": 1}, - {"matrix": [2, 0], "label": "Caps Lock", "w": 1.75, "x": 0, "y": 2}, + + {"matrix": [2, 0], "label": "Caps Lock", "x": 0, "y": 2, "w": 1.75}, {"matrix": [2, 1], "label": "A", "x": 1.75, "y": 2}, {"matrix": [2, 2], "label": "S", "x": 2.75, "y": 2}, {"matrix": [2, 3], "label": "D", "x": 3.75, "y": 2}, @@ -69,8 +70,9 @@ {"matrix": [2, 10], "label": ":", "x": 10.75, "y": 2}, {"matrix": [2, 11], "label": "@", "x": 11.75, "y": 2}, {"matrix": [2, 12], "label": "~", "x": 12.75, "y": 2}, + {"matrix": [1, 13], "label": "Enter", "x": 13.75, "y": 1, "w": 1.25, "h": 2}, - {"matrix": [3, 0], "label": "Shift", "w": 1.25, "x": 0, "y": 3}, + {"matrix": [3, 0], "label": "Shift", "x": 0, "y": 3, "w": 1.25}, {"matrix": [3, 1], "label": "|", "x": 1.25, "y": 3}, {"matrix": [3, 2], "label": "Z", "x": 2.25, "y": 3}, {"matrix": [3, 3], "label": "X", "x": 3.25, "y": 3}, @@ -82,16 +84,17 @@ {"matrix": [3, 9], "label": "<", "x": 9.25, "y": 3}, {"matrix": [3, 10], "label": ">", "x": 10.25, "y": 3}, {"matrix": [3, 11], "label": "?", "x": 11.25, "y": 3}, - {"matrix": [3, 12], "label": "Shift", "w": 1.75, "x": 12.25, "y": 3}, + {"matrix": [3, 12], "label": "Shift", "x": 12.25, "y": 3, "w": 1.75}, {"matrix": [3, 13], "label": "Fn", "x": 14, "y": 3}, - {"matrix": [4, 0], "label": "Ctrl", "w": 1.25, "x": 0, "y": 4}, - {"matrix": [4, 1], "label": "Win", "w": 1.25, "x": 1.25, "y": 4}, - {"matrix": [4, 2], "label": "Alt", "w": 1.25, "x": 2.5, "y": 4}, - {"matrix": [4, 6], "w": 6.25, "x": 3.75, "y": 4}, - {"matrix": [4, 10], "label": "AltGr", "w": 1.25, "x": 10, "y": 4}, - {"matrix": [4, 11], "label": "Win", "w": 1.25, "x": 11.25, "y": 4}, - {"matrix": [4, 12], "label": "Fn", "w": 1.25, "x": 12.5, "y": 4}, - {"matrix": [4, 13], "label": "Ctrl", "w": 1.25, "x": 13.75, "y": 4} + + {"matrix": [4, 0], "label": "Ctrl", "x": 0, "y": 4, "w": 1.25}, + {"matrix": [4, 1], "label": "Win", "x": 1.25, "y": 4, "w": 1.25}, + {"matrix": [4, 2], "label": "Alt", "x": 2.5, "y": 4, "w": 1.25}, + {"matrix": [4, 6], "x": 3.75, "y": 4, "w": 6.25}, + {"matrix": [4, 10], "label": "AltGr", "x": 10, "y": 4, "w": 1.25}, + {"matrix": [4, 11], "label": "Win", "x": 11.25, "y": 4, "w": 1.25}, + {"matrix": [4, 12], "label": "Fn", "x": 12.5, "y": 4, "w": 1.25}, + {"matrix": [4, 13], "label": "Ctrl", "x": 13.75, "y": 4, "w": 1.25} ] }, "LAYOUT_60_iso": { @@ -109,9 +112,9 @@ {"matrix": [0, 10], "label": ")", "x": 10, "y": 0}, {"matrix": [0, 11], "label": "_", "x": 11, "y": 0}, {"matrix": [0, 12], "label": "+", "x": 12, "y": 0}, - {"matrix": [0, 13], "label": "Back", "w": 2, "x": 13, "y": 0}, + {"matrix": [0, 13], "label": "Back", "x": 13, "y": 0, "w": 2}, - {"matrix": [1, 0], "label": "Tab", "w": 1.5, "x": 0, "y": 1}, + {"matrix": [1, 0], "label": "Tab", "x": 0, "y": 1, "w": 1.5}, {"matrix": [1, 1], "label": "Q", "x": 1.5, "y": 1}, {"matrix": [1, 2], "label": "W", "x": 2.5, "y": 1}, {"matrix": [1, 3], "label": "E", "x": 3.5, "y": 1}, @@ -124,8 +127,8 @@ {"matrix": [1, 10], "label": "P", "x": 10.5, "y": 1}, {"matrix": [1, 11], "label": "{", "x": 11.5, "y": 1}, {"matrix": [1, 12], "label": "}", "x": 12.5, "y": 1}, - {"matrix": [1, 13], "label": "Enter", "h": 2, "w": 1.25, "x": 13.75, "y": 1}, - {"matrix": [2, 0], "label": "Caps Lock", "w": 1.75, "x": 0, "y": 2}, + + {"matrix": [2, 0], "label": "Caps Lock", "x": 0, "y": 2, "w": 1.75}, {"matrix": [2, 1], "label": "A", "x": 1.75, "y": 2}, {"matrix": [2, 2], "label": "S", "x": 2.75, "y": 2}, {"matrix": [2, 3], "label": "D", "x": 3.75, "y": 2}, @@ -138,8 +141,9 @@ {"matrix": [2, 10], "label": ":", "x": 10.75, "y": 2}, {"matrix": [2, 11], "label": "@", "x": 11.75, "y": 2}, {"matrix": [2, 12], "label": "~", "x": 12.75, "y": 2}, + {"matrix": [1, 13], "label": "Enter", "x": 13.75, "y": 1, "w": 1.25, "h": 2}, - {"matrix": [3, 0], "label": "Shift", "w": 1.25, "x": 0, "y": 3}, + {"matrix": [3, 0], "label": "Shift", "x": 0, "y": 3, "w": 1.25}, {"matrix": [3, 1], "label": "|", "x": 1.25, "y": 3}, {"matrix": [3, 2], "label": "Z", "x": 2.25, "y": 3}, {"matrix": [3, 3], "label": "X", "x": 3.25, "y": 3}, @@ -151,16 +155,16 @@ {"matrix": [3, 9], "label": "<", "x": 9.25, "y": 3}, {"matrix": [3, 10], "label": ">", "x": 10.25, "y": 3}, {"matrix": [3, 11], "label": "?", "x": 11.25, "y": 3}, - {"matrix": [3, 12], "label": "Shift", "w": 2.75, "x": 12.25, "y": 3}, + {"matrix": [3, 12], "label": "Shift", "x": 12.25, "y": 3, "w": 2.75}, - {"matrix": [4, 0], "label": "Ctrl", "w": 1.25, "x": 0, "y": 4}, - {"matrix": [4, 1], "label": "Win", "w": 1.25, "x": 1.25, "y": 4}, - {"matrix": [4, 2], "label": "Alt", "w": 1.25, "x": 2.5, "y": 4}, - {"matrix": [4, 6], "w": 6.25, "x": 3.75, "y": 4}, - {"matrix": [4, 10], "label": "AltGr", "w": 1.25, "x": 10, "y": 4}, - {"matrix": [4, 11], "label": "Win", "w": 1.25, "x": 11.25, "y": 4}, - {"matrix": [4, 12], "label": "Fn", "w": 1.25, "x": 12.5, "y": 4}, - {"matrix": [4, 13], "label": "Ctrl", "w": 1.25, "x": 13.75, "y": 4} + {"matrix": [4, 0], "label": "Ctrl", "x": 0, "y": 4, "w": 1.25}, + {"matrix": [4, 1], "label": "Win", "x": 1.25, "y": 4, "w": 1.25}, + {"matrix": [4, 2], "label": "Alt", "x": 2.5, "y": 4, "w": 1.25}, + {"matrix": [4, 6], "x": 3.75, "y": 4, "w": 6.25}, + {"matrix": [4, 10], "label": "AltGr", "x": 10, "y": 4, "w": 1.25}, + {"matrix": [4, 11], "label": "Win", "x": 11.25, "y": 4, "w": 1.25}, + {"matrix": [4, 12], "label": "Fn", "x": 12.5, "y": 4, "w": 1.25}, + {"matrix": [4, 13], "label": "Ctrl", "x": 13.75, "y": 4, "w": 1.25} ] }, "LAYOUT_60_ansi": { @@ -178,9 +182,9 @@ {"matrix": [0, 10], "label": ")", "x": 10, "y": 0}, {"matrix": [0, 11], "label": "_", "x": 11, "y": 0}, {"matrix": [0, 12], "label": "+", "x": 12, "y": 0}, - {"matrix": [0, 13], "label": "Back", "w": 2, "x": 13, "y": 0}, + {"matrix": [0, 13], "label": "Back", "x": 13, "y": 0, "w": 2}, - {"matrix": [1, 0], "label": "Tab", "w": 1.5, "x": 0, "y": 1}, + {"matrix": [1, 0], "label": "Tab", "x": 0, "y": 1, "w": 1.5}, {"matrix": [1, 1], "label": "Q", "x": 1.5, "y": 1}, {"matrix": [1, 2], "label": "W", "x": 2.5, "y": 1}, {"matrix": [1, 3], "label": "E", "x": 3.5, "y": 1}, @@ -193,8 +197,9 @@ {"matrix": [1, 10], "label": "P", "x": 10.5, "y": 1}, {"matrix": [1, 11], "label": "{", "x": 11.5, "y": 1}, {"matrix": [1, 12], "label": "}", "x": 12.5, "y": 1}, - {"matrix": [1, 13], "label": "|", "w": 1.5, "x": 13.5, "y": 1}, - {"matrix": [2, 0], "label": "Caps Lock", "w": 1.75, "x": 0, "y": 2}, + {"matrix": [1, 13], "label": "|", "x": 13.5, "y": 1, "w": 1.5}, + + {"matrix": [2, 0], "label": "Caps Lock", "x": 0, "y": 2, "w": 1.75}, {"matrix": [2, 1], "label": "A", "x": 1.75, "y": 2}, {"matrix": [2, 2], "label": "S", "x": 2.75, "y": 2}, {"matrix": [2, 3], "label": "D", "x": 3.75, "y": 2}, @@ -206,10 +211,9 @@ {"matrix": [2, 9], "label": "L", "x": 9.75, "y": 2}, {"matrix": [2, 10], "label": ":", "x": 10.75, "y": 2}, {"matrix": [2, 11], "label": "'", "x": 11.75, "y": 2}, - {"matrix": [2, 12], "label": "Enter", "w": 2.25, "x": 12.75, "y": 2}, - - {"matrix": [3, 0], "label": "Shift", "w": 2.25, "x": 0, "y": 3}, + {"matrix": [2, 12], "label": "Enter", "x": 12.75, "y": 2, "w": 2.25}, + {"matrix": [3, 0], "label": "Shift", "x": 0, "y": 3, "w": 2.25}, {"matrix": [3, 2], "label": "Z", "x": 2.25, "y": 3}, {"matrix": [3, 3], "label": "X", "x": 3.25, "y": 3}, {"matrix": [3, 4], "label": "C", "x": 4.25, "y": 3}, @@ -220,16 +224,16 @@ {"matrix": [3, 9], "label": "<", "x": 9.25, "y": 3}, {"matrix": [3, 10], "label": ">", "x": 10.25, "y": 3}, {"matrix": [3, 11], "label": "?", "x": 11.25, "y": 3}, - {"matrix": [3, 12], "label": "Shift", "w": 2.75, "x": 12.25, "y": 3}, + {"matrix": [3, 12], "label": "Shift", "x": 12.25, "y": 3, "w": 2.75}, - {"matrix": [4, 0], "label": "Ctrl", "w": 1.25, "x": 0, "y": 4}, - {"matrix": [4, 1], "label": "Win", "w": 1.25, "x": 1.25, "y": 4}, - {"matrix": [4, 2], "label": "Alt", "w": 1.25, "x": 2.5, "y": 4}, - {"matrix": [4, 6], "w": 6.25, "x": 3.75, "y": 4}, - {"matrix": [4, 10], "label": "AltGr", "w": 1.25, "x": 10, "y": 4}, - {"matrix": [4, 11], "label": "Win", "w": 1.25, "x": 11.25, "y": 4}, - {"matrix": [4, 12], "label": "Fn", "w": 1.25, "x": 12.5, "y": 4}, - {"matrix": [4, 13], "label": "Ctrl", "w": 1.25, "x": 13.75, "y": 4} + {"matrix": [4, 0], "label": "Ctrl", "x": 0, "y": 4, "w": 1.25}, + {"matrix": [4, 1], "label": "Win", "x": 1.25, "y": 4, "w": 1.25}, + {"matrix": [4, 2], "label": "Alt", "x": 2.5, "y": 4, "w": 1.25}, + {"matrix": [4, 6], "x": 3.75, "y": 4, "w": 6.25}, + {"matrix": [4, 10], "label": "AltGr", "x": 10, "y": 4, "w": 1.25}, + {"matrix": [4, 11], "label": "Win", "x": 11.25, "y": 4, "w": 1.25}, + {"matrix": [4, 12], "label": "Fn", "x": 12.5, "y": 4, "w": 1.25}, + {"matrix": [4, 13], "label": "Ctrl", "x": 13.75, "y": 4, "w": 1.25} ] } } diff --git a/keyboards/prototypist/pt60/keymaps/default/keymap.c b/keyboards/prototypist/pt60/keymaps/default/keymap.c index 2461696475..9a2688e4c1 100644 --- a/keyboards/prototypist/pt60/keymaps/default/keymap.c +++ b/keyboards/prototypist/pt60/keymaps/default/keymap.c @@ -6,33 +6,33 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { [0] = LAYOUT_60_iso( QK_GESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, - KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_ENT, - KC_LGUI, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_NUHS, - KC_LSFT, KC_NUBS, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, + KC_LGUI, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_NUHS, KC_ENT, + KC_LSFT, KC_NUBS, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_RALT, KC_RGUI, MO(1), KC_RCTL ), [1] = LAYOUT_60_iso( EE_CLR, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_VOLU, - _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_UP, _______, _______, KC_MUTE, - KC_CAPS, _______, _______, _______, _______, _______, _______, _______, _______, KC_LEFT, KC_DOWN, KC_RGHT, _______, - _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, MO(2), + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_UP, _______, _______, + KC_CAPS, _______, _______, _______, _______, _______, _______, _______, _______, KC_LEFT, KC_DOWN, KC_RGHT, _______, KC_MUTE, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, MO(2), _______, _______, _______, _______, _______, _______, _______, _______ ), [2] = LAYOUT_60_iso( _______, KC_F13, KC_F14, KC_F15, KC_F16, KC_F17, KC_F18, KC_F19, KC_F20, KC_F21, KC_F22, KC_F23, KC_F24, KC_MPRV, - _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_MPLY, - QK_BOOT, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, - _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + QK_BOOT, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_MPLY, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, MO(3) ), [3] = LAYOUT_60_iso( _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, - _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, - _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______ ) -}; +}; diff --git a/keyboards/prototypist/pt60/keymaps/default_ansi/keymap.c b/keyboards/prototypist/pt60/keymaps/default_ansi/keymap.c index a25cd2fae9..b1e8987b65 100644 --- a/keyboards/prototypist/pt60/keymaps/default_ansi/keymap.c +++ b/keyboards/prototypist/pt60/keymaps/default_ansi/keymap.c @@ -7,32 +7,32 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { [0] = LAYOUT_60_ansi( QK_GESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, - KC_LGUI, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, - KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, + KC_LGUI, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, + KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_RALT, KC_RGUI, MO(1), KC_RCTL ), [1] = LAYOUT_60_ansi( EE_CLR, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_VOLU, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_UP, _______, _______, KC_MUTE, - KC_CAPS, _______, _______, _______, _______, _______, _______, _______, _______, KC_LEFT, KC_DOWN, KC_RGHT, _______, - _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, MO(2), + KC_CAPS, _______, _______, _______, _______, _______, _______, _______, _______, KC_LEFT, KC_DOWN, KC_RGHT, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, MO(2), _______, _______, _______, _______, _______, _______, _______, _______ ), [2] = LAYOUT_60_ansi( _______, KC_F13, KC_F14, KC_F15, KC_F16, KC_F17, KC_F18, KC_F19, KC_F20, KC_F21, KC_F22, KC_F23, KC_F24, KC_MPRV, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_MPLY, - QK_BOOT, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, - _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + QK_BOOT, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, MO(3) ), [3] = LAYOUT_60_ansi( _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, - _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, - _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______ ) }; diff --git a/keyboards/prototypist/pt60/keymaps/via/keymap.c b/keyboards/prototypist/pt60/keymaps/via/keymap.c index d710399a81..53e82bcd45 100644 --- a/keyboards/prototypist/pt60/keymaps/via/keymap.c +++ b/keyboards/prototypist/pt60/keymaps/via/keymap.c @@ -5,33 +5,33 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { [0] = LAYOUT_all( - QK_GESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_DEL, - KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_ENT, - KC_LGUI, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_NUHS, + QK_GESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_DEL, + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, + KC_LGUI, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_NUHS, KC_ENT, KC_LSFT, KC_NUBS, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, MO(1), KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_RALT, KC_RGUI, KC_APP, KC_RCTL ), [1] = LAYOUT_all( EE_CLR, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_VOLU, KC_VOLD, - _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_UP, _______, _______, KC_MUTE, - KC_CAPS, _______, _______, _______, _______, _______, _______, _______, _______, KC_LEFT, KC_DOWN, KC_RGHT, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_UP, _______, _______, + KC_CAPS, _______, _______, _______, _______, _______, _______, _______, _______, KC_LEFT, KC_DOWN, KC_RGHT, _______, KC_MUTE, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, MO(2), _______, _______, _______, _______, _______, _______, _______, _______, _______ ), [2] = LAYOUT_all( - _______, KC_F13, KC_F14, KC_F15, KC_F16, KC_F17, KC_F18, KC_F19, KC_F20, KC_F21, KC_F22, KC_F23, KC_F24, KC_MPRV, KC_MNXT, - _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_MPLY, - QK_BOOT, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, KC_F13, KC_F14, KC_F15, KC_F16, KC_F17, KC_F18, KC_F19, KC_F20, KC_F21, KC_F22, KC_F23, KC_F24, KC_MPRV, KC_MNXT, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + QK_BOOT, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_MPLY, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, MO(3) ), [3] = LAYOUT_all( _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, - _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______ ) diff --git a/keyboards/prototypist/pt60/matrix_diagram.md b/keyboards/prototypist/pt60/matrix_diagram.md new file mode 100644 index 0000000000..8401f90158 --- /dev/null +++ b/keyboards/prototypist/pt60/matrix_diagram.md @@ -0,0 +1,27 @@ +# Matrix Diagram for Proto[Typist] PT-60 + +``` + ┌───────┐ + 2u Backspace │0D │ + └───────┘ +┌───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┐ +│00 │01 │02 │03 │04 │05 │06 │07 │08 │09 │0A │0B │0C │0D │2D │ +├───┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴───┤ ┌─────┐ +│10 │11 │12 │13 │14 │15 │16 │17 │18 │19 │1A │1B │1C │1D │ │ │ +├─────┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴─────┤ ┌──┴┐1D │ ISO Enter +│20 │21 │22 │23 │24 │25 │26 │27 │28 │29 │2A │2B │2C │ │2C │ │ +├────┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴────┬───┤ └───┴────┘ +│30 │31 │32 │33 │34 │35 │36 │37 │38 │39 │3A │3B │3C │3D │ +├────┼───┴┬──┴─┬─┴───┴───┴───┴───┴───┴──┬┴───┼───┴┬────┬┴───┤ +│40 │41 │42 │46 │4A │4B │4C │4D │ +└────┴────┴────┴────────────────────────┴────┴────┴────┴────┘ +┌────────┐ ┌──────────┐ +│30 │ 2.25u LShift 2.75u RShift │3C │ +└────────┘ └──────────┘ +┌─────┬───┬─────┬───────────────────────────┬─────┬───┬─────┐ +│40 │41 │42 │46 │4B │4C │4D │ Tsangan/WKL +└─────┴───┴─────┴───────────────────────────┴─────┴───┴─────┘ +┌─────┬───┬───────────────────────────────────────┬───┬─────┐ +│40 │41 │46 │4C │4D │ Tsangan/WKL with 10u Spacebar +└─────┴───┴───────────────────────────────────────┴───┴─────┘ +``` diff --git a/keyboards/prototypist/pt80/info.json b/keyboards/prototypist/pt80/info.json index a9c47072a3..cb58643e3f 100644 --- a/keyboards/prototypist/pt80/info.json +++ b/keyboards/prototypist/pt80/info.json @@ -44,6 +44,7 @@ {"matrix": [0, 14], "label": "PrtSc", "x": 15.25, "y": 0}, {"matrix": [0, 15], "label": "Scroll Lock", "x": 16.25, "y": 0}, {"matrix": [0, 16], "label": "Pause", "x": 17.25, "y": 0}, + {"matrix": [1, 0], "label": "\u00ac", "x": 0, "y": 1.25}, {"matrix": [1, 1], "label": "!", "x": 1, "y": 1.25}, {"matrix": [1, 2], "label": "\"", "x": 2, "y": 1.25}, @@ -62,7 +63,8 @@ {"matrix": [1, 14], "label": "Insert", "x": 15.25, "y": 1.25}, {"matrix": [1, 15], "label": "Home", "x": 16.25, "y": 1.25}, {"matrix": [1, 16], "label": "PgUp", "x": 17.25, "y": 1.25}, - {"matrix": [2, 0], "label": "Tab", "w": 1.5, "x": 0, "y": 2.25}, + + {"matrix": [2, 0], "label": "Tab", "x": 0, "y": 2.25, "w": 1.5}, {"matrix": [2, 1], "label": "Q", "x": 1.5, "y": 2.25}, {"matrix": [2, 2], "label": "W", "x": 2.5, "y": 2.25}, {"matrix": [2, 3], "label": "E", "x": 3.5, "y": 2.25}, @@ -75,11 +77,11 @@ {"matrix": [2, 10], "label": "P", "x": 10.5, "y": 2.25}, {"matrix": [2, 11], "label": "{", "x": 11.5, "y": 2.25}, {"matrix": [2, 12], "label": "}", "x": 12.5, "y": 2.25}, - {"matrix": [2, 13], "h": 2, "label": "Enter", "w": 1.25, "x": 13.75, "y": 2.25}, {"matrix": [2, 14], "label": "Delete", "x": 15.25, "y": 2.25}, {"matrix": [2, 15], "label": "End", "x": 16.25, "y": 2.25}, {"matrix": [2, 16], "label": "PgDn", "x": 17.25, "y": 2.25}, - {"matrix": [3, 0], "label": "Caps Lock", "w": 1.75, "x": 0, "y": 3.25}, + + {"matrix": [3, 0], "label": "Caps Lock", "x": 0, "y": 3.25, "w": 1.75}, {"matrix": [3, 1], "label": "A", "x": 1.75, "y": 3.25}, {"matrix": [3, 2], "label": "S", "x": 2.75, "y": 3.25}, {"matrix": [3, 3], "label": "D", "x": 3.75, "y": 3.25}, @@ -92,7 +94,9 @@ {"matrix": [3, 10], "label": ":", "x": 10.75, "y": 3.25}, {"matrix": [3, 11], "label": "@", "x": 11.75, "y": 3.25}, {"matrix": [3, 12], "label": "~", "x": 12.75, "y": 3.25}, - {"matrix": [4, 0], "label": "Shift", "w": 1.25, "x": 0, "y": 4.25}, + {"matrix": [2, 13], "label": "Enter", "x": 13.75, "y": 2.25, "w": 1.25, "h": 2}, + + {"matrix": [4, 0], "label": "Shift", "x": 0, "y": 4.25, "w": 1.25}, {"matrix": [4, 1], "label": "|", "x": 1.25, "y": 4.25}, {"matrix": [4, 2], "label": "Z", "x": 2.25, "y": 4.25}, {"matrix": [4, 3], "label": "X", "x": 3.25, "y": 4.25}, @@ -104,17 +108,18 @@ {"matrix": [4, 9], "label": "<", "x": 9.25, "y": 4.25}, {"matrix": [4, 10], "label": ">", "x": 10.25, "y": 4.25}, {"matrix": [4, 11], "label": "?", "x": 11.25, "y": 4.25}, - {"matrix": [4, 12], "label": "Shift", "w": 1.75, "x": 12.25, "y": 4.25}, + {"matrix": [4, 12], "label": "Shift", "x": 12.25, "y": 4.25, "w": 1.75}, {"matrix": [4, 13], "label": "Fn", "x": 14, "y": 4.25}, {"matrix": [4, 15], "label": "\u2191", "x": 16.25, "y": 4.25}, - {"matrix": [5, 0], "label": "Ctrl", "w": 1.25, "x": 0, "y": 5.25}, - {"matrix": [5, 1], "label": "Win", "w": 1.25, "x": 1.25, "y": 5.25}, - {"matrix": [5, 2], "label": "Alt", "w": 1.25, "x": 2.5, "y": 5.25}, - {"matrix": [5, 6], "w": 6.25, "x": 3.75, "y": 5.25}, - {"matrix": [5, 10], "label": "AltGr", "w": 1.25, "x": 10, "y": 5.25}, - {"matrix": [5, 11], "label": "Win", "w": 1.25, "x": 11.25, "y": 5.25}, - {"matrix": [5, 12], "label": "Menu", "w": 1.25, "x": 12.5, "y": 5.25}, - {"matrix": [5, 13], "label": "Ctrl", "w": 1.25, "x": 13.75, "y": 5.25}, + + {"matrix": [5, 0], "label": "Ctrl", "x": 0, "y": 5.25, "w": 1.25}, + {"matrix": [5, 1], "label": "Win", "x": 1.25, "y": 5.25, "w": 1.25}, + {"matrix": [5, 2], "label": "Alt", "x": 2.5, "y": 5.25, "w": 1.25}, + {"matrix": [5, 6], "x": 3.75, "y": 5.25, "w": 6.25}, + {"matrix": [5, 10], "label": "AltGr", "x": 10, "y": 5.25, "w": 1.25}, + {"matrix": [5, 11], "label": "Win", "x": 11.25, "y": 5.25, "w": 1.25}, + {"matrix": [5, 12], "label": "Menu", "x": 12.5, "y": 5.25, "w": 1.25}, + {"matrix": [5, 13], "label": "Ctrl", "x": 13.75, "y": 5.25, "w": 1.25}, {"matrix": [5, 14], "label": "\u2190", "x": 15.25, "y": 5.25}, {"matrix": [5, 15], "label": "\u2193", "x": 16.25, "y": 5.25}, {"matrix": [5, 16], "label": "\u2192", "x": 17.25, "y": 5.25} @@ -123,22 +128,22 @@ "LAYOUT_tkl_iso": { "layout": [ {"matrix": [0, 0], "label": "Esc", "x": 0, "y": 0}, - {"matrix": [0, 1], "label": "F1", "x": 2, "y": 0}, - {"matrix": [0, 2], "label": "F2", "x": 3, "y": 0}, - {"matrix": [0, 3], "label": "F3", "x": 4, "y": 0}, - {"matrix": [0, 4], "label": "F4", "x": 5, "y": 0}, - {"matrix": [0, 5], "label": "F5", "x": 6.5, "y": 0}, - {"matrix": [0, 6], "label": "F6", "x": 7.5, "y": 0}, - {"matrix": [0, 7], "label": "F7", "x": 8.5, "y": 0}, - {"matrix": [0, 8], "label": "F8", "x": 9.5, "y": 0}, - {"matrix": [0, 9], "label": "F9", "x": 11, "y": 0}, - {"matrix": [0, 10], "label": "F10", "x": 12, "y": 0}, - {"matrix": [0, 11], "label": "F11", "x": 13, "y": 0}, - {"matrix": [0, 12], "label": "F12", "x": 14, "y": 0}, - + {"matrix": [0, 2], "label": "F1", "x": 2, "y": 0}, + {"matrix": [0, 3], "label": "F2", "x": 3, "y": 0}, + {"matrix": [0, 4], "label": "F3", "x": 4, "y": 0}, + {"matrix": [0, 5], "label": "F4", "x": 5, "y": 0}, + {"matrix": [0, 6], "label": "F5", "x": 6.5, "y": 0}, + {"matrix": [0, 7], "label": "F6", "x": 7.5, "y": 0}, + {"matrix": [0, 8], "label": "F7", "x": 8.5, "y": 0}, + {"matrix": [0, 9], "label": "F8", "x": 9.5, "y": 0}, + {"matrix": [0, 10], "label": "F9", "x": 11, "y": 0}, + {"matrix": [0, 11], "label": "F10", "x": 12, "y": 0}, + {"matrix": [0, 12], "label": "F11", "x": 13, "y": 0}, + {"matrix": [0, 13], "label": "F12", "x": 14, "y": 0}, {"matrix": [0, 14], "label": "PrtSc", "x": 15.25, "y": 0}, {"matrix": [0, 15], "label": "Scroll Lock", "x": 16.25, "y": 0}, {"matrix": [0, 16], "label": "Pause", "x": 17.25, "y": 0}, + {"matrix": [1, 0], "label": "\u00ac", "x": 0, "y": 1.25}, {"matrix": [1, 1], "label": "!", "x": 1, "y": 1.25}, {"matrix": [1, 2], "label": "\"", "x": 2, "y": 1.25}, @@ -152,12 +157,12 @@ {"matrix": [1, 10], "label": ")", "x": 10, "y": 1.25}, {"matrix": [1, 11], "label": "_", "x": 11, "y": 1.25}, {"matrix": [1, 12], "label": "+", "x": 12, "y": 1.25}, - {"matrix": [1, 13], "label": "Backspace", "w": 2, "x": 13, "y": 1.25}, - + {"matrix": [1, 13], "label": "Backspace", "x": 13, "y": 1.25, "w": 2}, {"matrix": [1, 14], "label": "Insert", "x": 15.25, "y": 1.25}, {"matrix": [1, 15], "label": "Home", "x": 16.25, "y": 1.25}, {"matrix": [1, 16], "label": "PgUp", "x": 17.25, "y": 1.25}, - {"matrix": [2, 0], "label": "Tab", "w": 1.5, "x": 0, "y": 2.25}, + + {"matrix": [2, 0], "label": "Tab", "x": 0, "y": 2.25, "w": 1.5}, {"matrix": [2, 1], "label": "Q", "x": 1.5, "y": 2.25}, {"matrix": [2, 2], "label": "W", "x": 2.5, "y": 2.25}, {"matrix": [2, 3], "label": "E", "x": 3.5, "y": 2.25}, @@ -170,11 +175,11 @@ {"matrix": [2, 10], "label": "P", "x": 10.5, "y": 2.25}, {"matrix": [2, 11], "label": "{", "x": 11.5, "y": 2.25}, {"matrix": [2, 12], "label": "}", "x": 12.5, "y": 2.25}, - {"matrix": [2, 13], "h": 2, "label": "Enter", "w": 1.25, "x": 13.75, "y": 2.25}, {"matrix": [2, 14], "label": "Delete", "x": 15.25, "y": 2.25}, {"matrix": [2, 15], "label": "End", "x": 16.25, "y": 2.25}, {"matrix": [2, 16], "label": "PgDn", "x": 17.25, "y": 2.25}, - {"matrix": [3, 0], "label": "Caps Lock", "w": 1.75, "x": 0, "y": 3.25}, + + {"matrix": [3, 0], "label": "Caps Lock", "x": 0, "y": 3.25, "w": 1.75}, {"matrix": [3, 1], "label": "A", "x": 1.75, "y": 3.25}, {"matrix": [3, 2], "label": "S", "x": 2.75, "y": 3.25}, {"matrix": [3, 3], "label": "D", "x": 3.75, "y": 3.25}, @@ -187,7 +192,9 @@ {"matrix": [3, 10], "label": ":", "x": 10.75, "y": 3.25}, {"matrix": [3, 11], "label": "@", "x": 11.75, "y": 3.25}, {"matrix": [3, 12], "label": "~", "x": 12.75, "y": 3.25}, - {"matrix": [4, 0], "label": "Shift", "w": 1.25, "x": 0, "y": 4.25}, + {"matrix": [2, 13], "label": "Enter", "x": 13.75, "y": 2.25, "w": 1.25, "h": 2}, + + {"matrix": [4, 0], "label": "Shift", "x": 0, "y": 4.25, "w": 1.25}, {"matrix": [4, 1], "label": "|", "x": 1.25, "y": 4.25}, {"matrix": [4, 2], "label": "Z", "x": 2.25, "y": 4.25}, {"matrix": [4, 3], "label": "X", "x": 3.25, "y": 4.25}, @@ -199,17 +206,17 @@ {"matrix": [4, 9], "label": "<", "x": 9.25, "y": 4.25}, {"matrix": [4, 10], "label": ">", "x": 10.25, "y": 4.25}, {"matrix": [4, 11], "label": "?", "x": 11.25, "y": 4.25}, - {"matrix": [4, 12], "label": "Shift", "w": 2.75, "x": 12.25, "y": 4.25}, - + {"matrix": [4, 12], "label": "Shift", "x": 12.25, "y": 4.25, "w": 2.75}, {"matrix": [4, 15], "label": "\u2191", "x": 16.25, "y": 4.25}, - {"matrix": [5, 0], "label": "Ctrl", "w": 1.25, "x": 0, "y": 5.25}, - {"matrix": [5, 1], "label": "Win", "w": 1.25, "x": 1.25, "y": 5.25}, - {"matrix": [5, 2], "label": "Alt", "w": 1.25, "x": 2.5, "y": 5.25}, - {"matrix": [5, 6], "w": 6.25, "x": 3.75, "y": 5.25}, - {"matrix": [5, 10], "label": "AltGr", "w": 1.25, "x": 10, "y": 5.25}, - {"matrix": [5, 11], "label": "Win", "w": 1.25, "x": 11.25, "y": 5.25}, - {"matrix": [5, 12], "label": "Menu", "w": 1.25, "x": 12.5, "y": 5.25}, - {"matrix": [5, 13], "label": "Ctrl", "w": 1.25, "x": 13.75, "y": 5.25}, + + {"matrix": [5, 0], "label": "Ctrl", "x": 0, "y": 5.25, "w": 1.25}, + {"matrix": [5, 1], "label": "Win", "x": 1.25, "y": 5.25, "w": 1.25}, + {"matrix": [5, 2], "label": "Alt", "x": 2.5, "y": 5.25, "w": 1.25}, + {"matrix": [5, 6], "x": 3.75, "y": 5.25, "w": 6.25}, + {"matrix": [5, 10], "label": "AltGr", "x": 10, "y": 5.25, "w": 1.25}, + {"matrix": [5, 11], "label": "Win", "x": 11.25, "y": 5.25, "w": 1.25}, + {"matrix": [5, 12], "label": "Menu", "x": 12.5, "y": 5.25, "w": 1.25}, + {"matrix": [5, 13], "label": "Ctrl", "x": 13.75, "y": 5.25, "w": 1.25}, {"matrix": [5, 14], "label": "\u2190", "x": 15.25, "y": 5.25}, {"matrix": [5, 15], "label": "\u2193", "x": 16.25, "y": 5.25}, {"matrix": [5, 16], "label": "\u2192", "x": 17.25, "y": 5.25} @@ -218,22 +225,22 @@ "LAYOUT_tkl_ansi": { "layout": [ {"matrix": [0, 0], "label": "Esc", "x": 0, "y": 0}, - {"matrix": [0, 1], "label": "F1", "x": 2, "y": 0}, - {"matrix": [0, 2], "label": "F2", "x": 3, "y": 0}, - {"matrix": [0, 3], "label": "F3", "x": 4, "y": 0}, - {"matrix": [0, 4], "label": "F4", "x": 5, "y": 0}, - {"matrix": [0, 5], "label": "F5", "x": 6.5, "y": 0}, - {"matrix": [0, 6], "label": "F6", "x": 7.5, "y": 0}, - {"matrix": [0, 7], "label": "F7", "x": 8.5, "y": 0}, - {"matrix": [0, 8], "label": "F8", "x": 9.5, "y": 0}, - {"matrix": [0, 9], "label": "F9", "x": 11, "y": 0}, - {"matrix": [0, 10], "label": "F10", "x": 12, "y": 0}, - {"matrix": [0, 11], "label": "F11", "x": 13, "y": 0}, - {"matrix": [0, 12], "label": "F12", "x": 14, "y": 0}, - + {"matrix": [0, 2], "label": "F1", "x": 2, "y": 0}, + {"matrix": [0, 3], "label": "F2", "x": 3, "y": 0}, + {"matrix": [0, 4], "label": "F3", "x": 4, "y": 0}, + {"matrix": [0, 5], "label": "F4", "x": 5, "y": 0}, + {"matrix": [0, 6], "label": "F5", "x": 6.5, "y": 0}, + {"matrix": [0, 7], "label": "F6", "x": 7.5, "y": 0}, + {"matrix": [0, 8], "label": "F7", "x": 8.5, "y": 0}, + {"matrix": [0, 9], "label": "F8", "x": 9.5, "y": 0}, + {"matrix": [0, 10], "label": "F9", "x": 11, "y": 0}, + {"matrix": [0, 11], "label": "F10", "x": 12, "y": 0}, + {"matrix": [0, 12], "label": "F11", "x": 13, "y": 0}, + {"matrix": [0, 13], "label": "F12", "x": 14, "y": 0}, {"matrix": [0, 14], "label": "PrtSc", "x": 15.25, "y": 0}, {"matrix": [0, 15], "label": "Scroll Lock", "x": 16.25, "y": 0}, {"matrix": [0, 16], "label": "Pause", "x": 17.25, "y": 0}, + {"matrix": [1, 0], "label": "\u00ac", "x": 0, "y": 1.25}, {"matrix": [1, 1], "label": "!", "x": 1, "y": 1.25}, {"matrix": [1, 2], "label": "\"", "x": 2, "y": 1.25}, @@ -247,12 +254,12 @@ {"matrix": [1, 10], "label": ")", "x": 10, "y": 1.25}, {"matrix": [1, 11], "label": "_", "x": 11, "y": 1.25}, {"matrix": [1, 12], "label": "+", "x": 12, "y": 1.25}, - {"matrix": [1, 13], "label": "Backspace", "w": 2, "x": 13, "y": 1.25}, - + {"matrix": [1, 13], "label": "Backspace", "x": 13, "y": 1.25, "w": 2}, {"matrix": [1, 14], "label": "Insert", "x": 15.25, "y": 1.25}, {"matrix": [1, 15], "label": "Home", "x": 16.25, "y": 1.25}, {"matrix": [1, 16], "label": "PgUp", "x": 17.25, "y": 1.25}, - {"matrix": [2, 0], "label": "Tab", "w": 1.5, "x": 0, "y": 2.25}, + + {"matrix": [2, 0], "label": "Tab", "x": 0, "y": 2.25, "w": 1.5}, {"matrix": [2, 1], "label": "Q", "x": 1.5, "y": 2.25}, {"matrix": [2, 2], "label": "W", "x": 2.5, "y": 2.25}, {"matrix": [2, 3], "label": "E", "x": 3.5, "y": 2.25}, @@ -265,11 +272,12 @@ {"matrix": [2, 10], "label": "P", "x": 10.5, "y": 2.25}, {"matrix": [2, 11], "label": "{", "x": 11.5, "y": 2.25}, {"matrix": [2, 12], "label": "}", "x": 12.5, "y": 2.25}, - {"matrix": [2, 13], "label": "|", "w": 1.5, "x": 13.5, "y": 2.25}, + {"matrix": [2, 13], "label": "|", "x": 13.5, "y": 2.25, "w": 1.5}, {"matrix": [2, 14], "label": "Delete", "x": 15.25, "y": 2.25}, {"matrix": [2, 15], "label": "End", "x": 16.25, "y": 2.25}, {"matrix": [2, 16], "label": "PgDn", "x": 17.25, "y": 2.25}, - {"matrix": [3, 0], "label": "Caps Lock", "w": 1.75, "x": 0, "y": 3.25}, + + {"matrix": [3, 0], "label": "Caps Lock", "x": 0, "y": 3.25, "w": 1.75}, {"matrix": [3, 1], "label": "A", "x": 1.75, "y": 3.25}, {"matrix": [3, 2], "label": "S", "x": 2.75, "y": 3.25}, {"matrix": [3, 3], "label": "D", "x": 3.75, "y": 3.25}, @@ -281,9 +289,9 @@ {"matrix": [3, 9], "label": "L", "x": 9.75, "y": 3.25}, {"matrix": [3, 10], "label": ":", "x": 10.75, "y": 3.25}, {"matrix": [3, 11], "label": "@", "x": 11.75, "y": 3.25}, - {"matrix": [3, 12], "label": "Enter", "w": 2.25, "x": 12.75, "y": 3.25}, - {"matrix": [4, 0], "label": "Shift", "w": 2.25, "x": 0, "y": 4.25}, + {"matrix": [3, 12], "label": "Enter", "x": 12.75, "y": 3.25, "w": 2.25}, + {"matrix": [4, 0], "label": "Shift", "x": 0, "y": 4.25, "w": 2.25}, {"matrix": [4, 2], "label": "Z", "x": 2.25, "y": 4.25}, {"matrix": [4, 3], "label": "X", "x": 3.25, "y": 4.25}, {"matrix": [4, 4], "label": "C", "x": 4.25, "y": 4.25}, @@ -294,17 +302,17 @@ {"matrix": [4, 9], "label": "<", "x": 9.25, "y": 4.25}, {"matrix": [4, 10], "label": ">", "x": 10.25, "y": 4.25}, {"matrix": [4, 11], "label": "?", "x": 11.25, "y": 4.25}, - {"matrix": [4, 12], "label": "Shift", "w": 2.75, "x": 12.25, "y": 4.25}, - + {"matrix": [4, 12], "label": "Shift", "x": 12.25, "y": 4.25, "w": 2.75}, {"matrix": [4, 15], "label": "\u2191", "x": 16.25, "y": 4.25}, - {"matrix": [5, 0], "label": "Ctrl", "w": 1.25, "x": 0, "y": 5.25}, - {"matrix": [5, 1], "label": "Win", "w": 1.25, "x": 1.25, "y": 5.25}, - {"matrix": [5, 2], "label": "Alt", "w": 1.25, "x": 2.5, "y": 5.25}, - {"matrix": [5, 6], "w": 6.25, "x": 3.75, "y": 5.25}, - {"matrix": [5, 10], "label": "AltGr", "w": 1.25, "x": 10, "y": 5.25}, - {"matrix": [5, 11], "label": "Win", "w": 1.25, "x": 11.25, "y": 5.25}, - {"matrix": [5, 12], "label": "Menu", "w": 1.25, "x": 12.5, "y": 5.25}, - {"matrix": [5, 13], "label": "Ctrl", "w": 1.25, "x": 13.75, "y": 5.25}, + + {"matrix": [5, 0], "label": "Ctrl", "x": 0, "y": 5.25, "w": 1.25}, + {"matrix": [5, 1], "label": "Win", "x": 1.25, "y": 5.25, "w": 1.25}, + {"matrix": [5, 2], "label": "Alt", "x": 2.5, "y": 5.25, "w": 1.25}, + {"matrix": [5, 6], "x": 3.75, "y": 5.25, "w": 6.25}, + {"matrix": [5, 10], "label": "AltGr", "x": 10, "y": 5.25, "w": 1.25}, + {"matrix": [5, 11], "label": "Win", "x": 11.25, "y": 5.25, "w": 1.25}, + {"matrix": [5, 12], "label": "Menu", "x": 12.5, "y": 5.25, "w": 1.25}, + {"matrix": [5, 13], "label": "Ctrl", "x": 13.75, "y": 5.25, "w": 1.25}, {"matrix": [5, 14], "label": "\u2190", "x": 15.25, "y": 5.25}, {"matrix": [5, 15], "label": "\u2193", "x": 16.25, "y": 5.25}, {"matrix": [5, 16], "label": "\u2192", "x": 17.25, "y": 5.25} diff --git a/keyboards/prototypist/pt80/keymaps/default/keymap.c b/keyboards/prototypist/pt80/keymaps/default/keymap.c index 5c5776b271..5905a8d05f 100644 --- a/keyboards/prototypist/pt80/keymaps/default/keymap.c +++ b/keyboards/prototypist/pt80/keymaps/default/keymap.c @@ -5,43 +5,43 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { [0] = LAYOUT_tkl_iso( - KC_ESC, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_PSCR, KC_SCRL, KC_PAUS, + KC_ESC, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_PSCR, KC_SCRL, KC_PAUS, - KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_INS, KC_HOME, KC_PGUP, - KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_ENT, KC_DEL, KC_END, KC_PGDN, - KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_NUHS, - KC_LSFT, KC_NUBS, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_UP, - KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_RALT, KC_RGUI, KC_APP, KC_RCTL, KC_LEFT, KC_DOWN, KC_RGHT + KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_INS, KC_HOME, KC_PGUP, + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_DEL, KC_END, KC_PGDN, + KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_NUHS, KC_ENT, + KC_LSFT, KC_NUBS, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_UP, + KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_RALT, KC_RGUI, KC_APP, KC_RCTL, KC_LEFT, KC_DOWN, KC_RGHT ), [1] = LAYOUT_tkl_iso( - QK_BOOT, KC_F14, KC_F15, KC_F16, KC_F17, KC_F18, KC_F19, KC_F20, KC_F21, KC_F22, KC_F23, KC_F24, KC_MUTE, _______, KC_MPLY, _______, + QK_BOOT, KC_F14, KC_F15, KC_F16, KC_F17, KC_F18, KC_F19, KC_F20, KC_F21, KC_F22, KC_F23, KC_F24, KC_MUTE, _______, KC_MPLY, _______, - _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, - _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, - _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, - _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, MO(2), KC_VOLU, - _______, _______, _______, _______, _______, _______, _______, _______, KC_MPRV, KC_VOLD, KC_MNXT + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, MO(2), KC_VOLU, + _______, _______, _______, _______, _______, _______, _______, _______, KC_MPRV, KC_VOLD, KC_MNXT ), [2] = LAYOUT_tkl_iso( - _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, - _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, - _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, - _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, - _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, - _______, _______, _______, _______, _______, _______, _______, MO(3), _______, _______, _______ + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, MO(3), _______, _______, _______ ), [3] = LAYOUT_tkl_iso( - _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, - _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, - _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, - _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, - _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, - _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______ + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______ ) - + }; diff --git a/keyboards/prototypist/pt80/keymaps/default_ansi/keymap.c b/keyboards/prototypist/pt80/keymaps/default_ansi/keymap.c index d4d974464a..0f851bcd5c 100644 --- a/keyboards/prototypist/pt80/keymaps/default_ansi/keymap.c +++ b/keyboards/prototypist/pt80/keymaps/default_ansi/keymap.c @@ -5,43 +5,43 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { [0] = LAYOUT_tkl_ansi( - KC_ESC, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_PSCR, KC_SCRL, KC_PAUS, + KC_ESC, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_PSCR, KC_SCRL, KC_PAUS, - KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_INS, KC_HOME, KC_PGUP, - KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_DEL, KC_END, KC_PGDN, - KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, - KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_UP, - KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_RALT, KC_RGUI, KC_APP, KC_RCTL, KC_LEFT, KC_DOWN, KC_RGHT + KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_INS, KC_HOME, KC_PGUP, + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_DEL, KC_END, KC_PGDN, + KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, + KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_UP, + KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_RALT, KC_RGUI, KC_APP, KC_RCTL, KC_LEFT, KC_DOWN, KC_RGHT ), [1] = LAYOUT_tkl_ansi( - QK_BOOT, KC_F14, KC_F15, KC_F16, KC_F17, KC_F18, KC_F19, KC_F20, KC_F21, KC_F22, KC_F23, KC_F24, KC_MUTE, _______, KC_MPLY, _______, + QK_BOOT, KC_F14, KC_F15, KC_F16, KC_F17, KC_F18, KC_F19, KC_F20, KC_F21, KC_F22, KC_F23, KC_F24, KC_MUTE, _______, KC_MPLY, _______, - _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, - _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, - _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, - _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, MO(2), KC_VOLU, - _______, _______, _______, _______, _______, _______, _______, _______, KC_MPRV, KC_VOLD, KC_MNXT + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, MO(2), KC_VOLU, + _______, _______, _______, _______, _______, _______, _______, _______, KC_MPRV, KC_VOLD, KC_MNXT ), [2] = LAYOUT_tkl_ansi( - _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, - _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, - _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, - _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, - _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, - _______, _______, _______, _______, _______, _______, _______, MO(3), _______, _______, _______ + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, MO(3), _______, _______, _______ ), [3] = LAYOUT_tkl_ansi( - _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, - _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, - _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, - _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, - _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, - _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______ + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______ ) - + }; diff --git a/keyboards/prototypist/pt80/keymaps/via/keymap.c b/keyboards/prototypist/pt80/keymaps/via/keymap.c index 0529547ba7..c3fe205bc0 100644 --- a/keyboards/prototypist/pt80/keymaps/via/keymap.c +++ b/keyboards/prototypist/pt80/keymaps/via/keymap.c @@ -5,43 +5,43 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { [0] = LAYOUT_all( - KC_ESC, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_F13, KC_PSCR, KC_SCRL, KC_PAUS, + KC_ESC, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_F13, KC_PSCR, KC_SCRL, KC_PAUS, - KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_DEL, KC_INS, KC_HOME, KC_PGUP, - KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_ENT, KC_DEL, KC_END, KC_PGDN, - KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_NUHS, - KC_LSFT, KC_NUBS, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, MO(1), KC_UP, - KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_RALT, KC_RGUI, KC_APP, KC_RCTL, KC_LEFT, KC_DOWN, KC_RGHT + KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_DEL, KC_INS, KC_HOME, KC_PGUP, + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_DEL, KC_END, KC_PGDN, + KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_NUHS, KC_ENT, + KC_LSFT, KC_NUBS, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, MO(1), KC_UP, + KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_RALT, KC_RGUI, KC_APP, KC_RCTL, KC_LEFT, KC_DOWN, KC_RGHT ), [1] = LAYOUT_all( - QK_BOOT, KC_F14, KC_F15, KC_F16, KC_F17, KC_F18, KC_F19, KC_F20, KC_F21, KC_F22, KC_F23, KC_F24, _______, KC_MUTE, _______, KC_MPLY, _______, + QK_BOOT, KC_F14, KC_F15, KC_F16, KC_F17, KC_F18, KC_F19, KC_F20, KC_F21, KC_F22, KC_F23, KC_F24, _______, KC_MUTE, _______, KC_MPLY, _______, - _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, - _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, - _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, - _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, MO(2), _______, KC_VOLU, - _______, _______, _______, _______, _______, _______, _______, _______, KC_MPRV, KC_VOLD, KC_MNXT + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, MO(2), _______, KC_VOLU, + _______, _______, _______, _______, _______, _______, _______, _______, KC_MPRV, KC_VOLD, KC_MNXT ), [2] = LAYOUT_all( - _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, - _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, - _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, - _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, - _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, - _______, _______, _______, _______, _______, _______, _______, MO(3), _______, _______, _______ + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, MO(3), _______, _______, _______ ), [3] = LAYOUT_all( - _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, - _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, - _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, - _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, - _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, - _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______ + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______ ) - + }; diff --git a/keyboards/prototypist/pt80/matrix_diagram.md b/keyboards/prototypist/pt80/matrix_diagram.md new file mode 100644 index 0000000000..e4fa03655e --- /dev/null +++ b/keyboards/prototypist/pt80/matrix_diagram.md @@ -0,0 +1,30 @@ +# Matrix Diagram for Proto[Typist] PT-80 + +``` +┌───┐ ┌───┬───┬───┬───┐ ┌───┬───┬───┬───┐ ┌───┬───┬───┬───┐ +│00 │ │02 │03 │04 │05 │ │06 │07 │08 │09 │ │0A │0B │0C │0D │ Standard +└───┘ └───┴───┴───┴───┘ └───┴───┴───┴───┘ └───┴───┴───┴───┘ +┌───┐┌───┬───┬───┬───┐┌───┬───┬───┬───┐┌───┬───┬───┬───┐┌───┐┌───┬───┬───┐ +│00 ││01 │02 │03 │04 ││05 │06 │07 │08 ││09 │0A │0B │0C ││0D ││0E │0F │0G │ +└───┘└───┴───┴───┴───┘└───┴───┴───┴───┘└───┴───┴───┴───┘└───┘└───┴───┴───┘ +┌───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┐┌───┬───┬───┐ ┌───────┐ +│10 │11 │12 │13 │14 │15 │16 │17 │18 │19 │1A │1B │1C │1D │3D ││1E │1F │1G │ │1D │ 2u Backspace +├───┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴───┤├───┼───┼───┤ └─┬─────┤ +│20 │21 │22 │23 │24 │25 │26 │27 │28 │29 │2A │2B │2C │2D ││2E │2F │2G │ │ │ +├─────┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴─────┤└───┴───┴───┘ ┌──┴┐2D │ ISO Enter +│30 │31 │32 │33 │34 │35 │36 │37 │38 │39 │3A │3B │3C │ │3C │ │ +├────┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴────┬───┤ ┌───┐ └───┴────┘ +│40 │41 │42 │43 │44 │45 │46 │47 │48 │49 │4A │4B │4C │4D │ │4F │ +├────┼───┴┬──┴─┬─┴───┴───┴───┴───┴───┴──┬┴───┼───┴┬────┬┴───┤┌───┼───┼───┐ +│50 │51 │52 │56 │5A │5B │5C │5D ││5E │5F │5G │ +└────┴────┴────┴────────────────────────┴────┴────┴────┴────┘└───┴───┴───┘ +┌────────┐ ┌──────────┐ +│40 │ 2.25u LShift 2.75u RShift │4C │ +└────────┘ └──────────┘ +┌─────┬───┬─────┬───────────────────────────┬─────┬───┬─────┐ +│50 │51 │52 │56 │5B │5C │5D │ Tsangan/WKL +└─────┴───┴─────┴───────────────────────────┴─────┴───┴─────┘ +┌─────┬───┬───────────────────────────────────────┬───┬─────┐ +│50 │51 │56 │5C │5D │ Tsangan/WKL with 10u Spacebar +└─────┴───┴───────────────────────────────────────┴───┴─────┘ +``` diff --git a/keyboards/protozoa/cassini/rules.mk b/keyboards/protozoa/cassini/rules.mk index 7000bb6571..7c0709f41e 100644 --- a/keyboards/protozoa/cassini/rules.mk +++ b/keyboards/protozoa/cassini/rules.mk @@ -1,11 +1,6 @@ # Wildcard to allow APM32 MCU DFU_SUFFIX_ARGS = -v FFFF -p FFFF -# Do not put the microcontroller into power saving mode -# when we get USB suspend event. We want it to keep updating -# backlight effects. -OPT_DEFS += -DCORTEX_ENABLE_WFI_IDLE=TRUE - # Build Options # change yes to no to disable # diff --git a/keyboards/protozoa/p01/config.h b/keyboards/protozoa/p01/config.h index 46f96e7934..06e46c9fa1 100644 --- a/keyboards/protozoa/p01/config.h +++ b/keyboards/protozoa/p01/config.h @@ -24,10 +24,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #define WS2812_DMA_STREAM STM32_DMA1_STREAM5 #define WS2812_DMA_CHANNEL 5 -#define RGBLED_NUM 18 -#define RGBLIGHT_HUE_STEP 8 -#define RGBLIGHT_SAT_STEP 8 -#define RGBLIGHT_VAL_STEP 8 #define RGBLIGHT_EFFECT_BREATHING #define RGBLIGHT_EFFECT_RAINBOW_MOOD #define RGBLIGHT_EFFECT_RAINBOW_SWIRL diff --git a/keyboards/protozoa/p01/info.json b/keyboards/protozoa/p01/info.json index 94089a3b78..4209c1d4cf 100644 --- a/keyboards/protozoa/p01/info.json +++ b/keyboards/protozoa/p01/info.json @@ -8,6 +8,11 @@ "pid": "0x5031", "device_version": "0.0.1" }, + "rgblight": { + "saturation_steps": 8, + "brightness_steps": 8, + "led_count": 18 + }, "ws2812": { "pin": "A9", "driver": "pwm" diff --git a/keyboards/protozoa/p01/rules.mk b/keyboards/protozoa/p01/rules.mk index a9e8e0f92e..adb0000e01 100644 --- a/keyboards/protozoa/p01/rules.mk +++ b/keyboards/protozoa/p01/rules.mk @@ -1,11 +1,6 @@ # Wildcard to allow APM32 MCU DFU_SUFFIX_ARGS = -v FFFF -p FFFF -# Do not put the microcontroller into power saving mode -# when we get USB suspend event. We want it to keep updating -# backlight effects. -OPT_DEFS += -DCORTEX_ENABLE_WFI_IDLE=TRUE - # Build Options # change yes to no to disable # diff --git a/keyboards/pteron36/config.h b/keyboards/pteron36/config.h index d661f794cc..1148463200 100644 --- a/keyboards/pteron36/config.h +++ b/keyboards/pteron36/config.h @@ -40,6 +40,3 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. // for via #define DYNAMIC_KEYMAP_LAYER_COUNT 7 - -//RGB Underglow -#define RGBLED_NUM 10 diff --git a/keyboards/pteron36/info.json b/keyboards/pteron36/info.json index bb5a8ee1eb..418ca0f6b8 100644 --- a/keyboards/pteron36/info.json +++ b/keyboards/pteron36/info.json @@ -28,6 +28,9 @@ } } }, + "rgblight": { + "led_count": 10 + }, "ws2812": { "pin": "B6" }, diff --git a/keyboards/qpockets/space_space/rev2/config.h b/keyboards/qpockets/space_space/rev2/config.h index 6603c0e153..02bd670f71 100644 --- a/keyboards/qpockets/space_space/rev2/config.h +++ b/keyboards/qpockets/space_space/rev2/config.h @@ -18,7 +18,4 @@ #define LOCKING_SUPPORT_ENABLE -#define RGBLED_NUM 4 - -#define RGB_MATRIX_LED_COUNT RGBLED_NUM #define RGBLIGHT_DEFAULT_HUE 130 diff --git a/keyboards/qpockets/space_space/rev2/info.json b/keyboards/qpockets/space_space/rev2/info.json index 635c66db99..45cdb5870a 100644 --- a/keyboards/qpockets/space_space/rev2/info.json +++ b/keyboards/qpockets/space_space/rev2/info.json @@ -19,6 +19,9 @@ {"pin_a": "C7", "pin_b": "F7", "resolution": 3} ] }, + "rgblight": { + "led_count": 4 + }, "ws2812": { "pin": "F0" }, diff --git a/keyboards/quad_h/lb75/config.h b/keyboards/quad_h/lb75/config.h index 9457b20766..ee31dd7bfe 100644 --- a/keyboards/quad_h/lb75/config.h +++ b/keyboards/quad_h/lb75/config.h @@ -17,11 +17,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #pragma once - #define RGBLED_NUM 16 - #define RGBLIGHT_HUE_STEP 8 - #define RGBLIGHT_SAT_STEP 8 - #define RGBLIGHT_VAL_STEP 8 - #define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */ #define RGBLIGHT_EFFECT_BREATHING #define RGBLIGHT_EFFECT_RAINBOW_MOOD #define RGBLIGHT_EFFECT_RAINBOW_SWIRL diff --git a/keyboards/quad_h/lb75/info.json b/keyboards/quad_h/lb75/info.json index 786439186f..161a7028a6 100644 --- a/keyboards/quad_h/lb75/info.json +++ b/keyboards/quad_h/lb75/info.json @@ -21,7 +21,11 @@ "pin": "B0" }, "rgblight": { - "max_brightness": 220 + "saturation_steps": 8, + "brightness_steps": 8, + "led_count": 16, + "max_brightness": 220, + "sleep": true }, "processor": "atmega32u4", "bootloader": "atmel-dfu", diff --git a/keyboards/quarkeys/z40/config.h b/keyboards/quarkeys/z40/config.h index ece3e61136..8aeaf51cc7 100644 --- a/keyboards/quarkeys/z40/config.h +++ b/keyboards/quarkeys/z40/config.h @@ -20,9 +20,6 @@ #define RGB_MATRIX_FRAMEBUFFER_EFFECTS #define RGB_DISABLE_WHEN_USB_SUSPENDED // Turn off effects when suspended #define RGB_MATRIX_MAXIMUM_BRIGHTNESS 130 // Limits maximum brightness of LEDs to 150 out of 255. Higher may cause the controller to crash. -#define RGB_MATRIX_SAT_STEP 8 -#define RGB_MATRIX_VAL_STEP 8 -#define RGB_MATRIX_SPD_STEP 10 // RGB_MATRIX effects #define ENABLE_RGB_MATRIX_ALPHAS_MODS //Enables RGB_MATRIX_ALPHAS_MODS @@ -47,10 +44,6 @@ #endif #ifdef RGBLIGHT_ENABLE -#define RGBLED_NUM 47 -#define RGBLIGHT_HUE_STEP 8 -#define RGBLIGHT_SAT_STEP 8 -#define RGBLIGHT_VAL_STEP 8 #define RGBLIGHT_EFFECT_BREATHING #define RGBLIGHT_EFFECT_RAINBOW_MOOD @@ -64,5 +57,4 @@ #define RGBLIGHT_LAYERS #define RGBLIGHT_LAYERS_OVERRIDE_RGB_OFF -#define RGBLIGHT_SLEEP #endif
\ No newline at end of file diff --git a/keyboards/quarkeys/z40/info.json b/keyboards/quarkeys/z40/info.json index 3841e8c16a..0ce1a64214 100644 --- a/keyboards/quarkeys/z40/info.json +++ b/keyboards/quarkeys/z40/info.json @@ -9,10 +9,17 @@ "device_version": "0.0.1" }, "rgb_matrix": { - "driver": "WS2812" + "driver": "WS2812", + "sat_steps": 8, + "val_steps": 8, + "speed_steps": 10 }, "rgblight": { - "max_brightness": 130 + "saturation_steps": 8, + "brightness_steps": 8, + "led_count": 47, + "max_brightness": 130, + "sleep": true }, "matrix_pins": { "cols": ["F4", "F5", "F6", "F7", "B6", "B5", "B4", "D7", "D6", "D0", "B1", "B0"], diff --git a/keyboards/quarkeys/z60/hotswap/config.h b/keyboards/quarkeys/z60/hotswap/config.h index f02635a639..1117b87873 100644 --- a/keyboards/quarkeys/z60/hotswap/config.h +++ b/keyboards/quarkeys/z60/hotswap/config.h @@ -14,11 +14,6 @@ #pragma once -#define RGBLED_NUM 80 -#define RGBLIGHT_HUE_STEP 8 -#define RGBLIGHT_SAT_STEP 8 -#define RGBLIGHT_VAL_STEP 8 - #define RGBLIGHT_EFFECT_BREATHING #define RGBLIGHT_EFFECT_RAINBOW_MOOD #define RGBLIGHT_EFFECT_RAINBOW_SWIRL @@ -32,4 +27,3 @@ #define RGBLIGHT_LAYERS #define RGBLIGHT_LAYERS_OVERRIDE_RGB_OFF -#define RGBLIGHT_SLEEP diff --git a/keyboards/quarkeys/z60/hotswap/info.json b/keyboards/quarkeys/z60/hotswap/info.json index 1db45e4f7b..d1c7d3d514 100644 --- a/keyboards/quarkeys/z60/hotswap/info.json +++ b/keyboards/quarkeys/z60/hotswap/info.json @@ -16,7 +16,11 @@ "pin": "D6" }, "rgblight": { - "max_brightness": 140 + "saturation_steps": 8, + "brightness_steps": 8, + "led_count": 80, + "max_brightness": 140, + "sleep": true }, "diode_direction": "COL2ROW", "processor": "atmega32u4", diff --git a/keyboards/quarkeys/z60/solder/config.h b/keyboards/quarkeys/z60/solder/config.h index 588044ec30..4c4e1658a6 100644 --- a/keyboards/quarkeys/z60/solder/config.h +++ b/keyboards/quarkeys/z60/solder/config.h @@ -14,11 +14,6 @@ #pragma once -#define RGBLED_NUM 77 -#define RGBLIGHT_HUE_STEP 8 -#define RGBLIGHT_SAT_STEP 8 -#define RGBLIGHT_VAL_STEP 8 - #define RGBLIGHT_EFFECT_BREATHING #define RGBLIGHT_EFFECT_RAINBOW_MOOD #define RGBLIGHT_EFFECT_RAINBOW_SWIRL @@ -32,5 +27,3 @@ #define RGBLIGHT_LAYERS #define RGBLIGHT_LAYERS_OVERRIDE_RGB_OFF #define RGBLIGHT_DEFAULT_MODE (RGBLIGHT_MODE_RAINBOW_SWIRL + 2) - -#define RGBLIGHT_SLEEP diff --git a/keyboards/quarkeys/z60/solder/info.json b/keyboards/quarkeys/z60/solder/info.json index 75316622d1..640a8c0da5 100644 --- a/keyboards/quarkeys/z60/solder/info.json +++ b/keyboards/quarkeys/z60/solder/info.json @@ -16,7 +16,11 @@ "pin": "D6" }, "rgblight": { - "max_brightness": 180 + "saturation_steps": 8, + "brightness_steps": 8, + "led_count": 77, + "max_brightness": 180, + "sleep": true }, "diode_direction": "COL2ROW", "processor": "atmega32u4", diff --git a/keyboards/quarkeys/z67/hotswap/config.h b/keyboards/quarkeys/z67/hotswap/config.h index f662eb9480..1117b87873 100644 --- a/keyboards/quarkeys/z67/hotswap/config.h +++ b/keyboards/quarkeys/z67/hotswap/config.h @@ -14,11 +14,6 @@ #pragma once -#define RGBLED_NUM 77 -#define RGBLIGHT_HUE_STEP 8 -#define RGBLIGHT_SAT_STEP 8 -#define RGBLIGHT_VAL_STEP 8 - #define RGBLIGHT_EFFECT_BREATHING #define RGBLIGHT_EFFECT_RAINBOW_MOOD #define RGBLIGHT_EFFECT_RAINBOW_SWIRL @@ -32,4 +27,3 @@ #define RGBLIGHT_LAYERS #define RGBLIGHT_LAYERS_OVERRIDE_RGB_OFF -#define RGBLIGHT_SLEEP diff --git a/keyboards/quarkeys/z67/hotswap/info.json b/keyboards/quarkeys/z67/hotswap/info.json index 43a9f465f7..b024c27f1a 100644 --- a/keyboards/quarkeys/z67/hotswap/info.json +++ b/keyboards/quarkeys/z67/hotswap/info.json @@ -16,7 +16,11 @@ "pin": "F0" }, "rgblight": { - "max_brightness": 180 + "saturation_steps": 8, + "brightness_steps": 8, + "led_count": 77, + "max_brightness": 180, + "sleep": true }, "diode_direction": "COL2ROW", "processor": "atmega32u4", diff --git a/keyboards/quarkeys/z67/solder/config.h b/keyboards/quarkeys/z67/solder/config.h index e65139c5ff..4eaf0f6072 100644 --- a/keyboards/quarkeys/z67/solder/config.h +++ b/keyboards/quarkeys/z67/solder/config.h @@ -14,11 +14,6 @@ #pragma once -#define RGBLED_NUM 18 -#define RGBLIGHT_HUE_STEP 8 -#define RGBLIGHT_SAT_STEP 8 -#define RGBLIGHT_VAL_STEP 8 - #define RGBLIGHT_EFFECT_BREATHING #define RGBLIGHT_EFFECT_RAINBOW_MOOD #define RGBLIGHT_EFFECT_RAINBOW_SWIRL @@ -31,4 +26,3 @@ #define RGBLIGHT_DEFAULT_MODE (RGBLIGHT_MODE_RAINBOW_SWIRL + 2) #define RGBLIGHT_LAYERS -#define RGBLIGHT_SLEEP diff --git a/keyboards/quarkeys/z67/solder/info.json b/keyboards/quarkeys/z67/solder/info.json index 2a19958302..42139d75ac 100644 --- a/keyboards/quarkeys/z67/solder/info.json +++ b/keyboards/quarkeys/z67/solder/info.json @@ -16,7 +16,11 @@ "pin": "F0" }, "rgblight": { - "max_brightness": 180 + "saturation_steps": 8, + "brightness_steps": 8, + "led_count": 18, + "max_brightness": 180, + "sleep": true }, "diode_direction": "COL2ROW", "processor": "atmega32u4", diff --git a/keyboards/qvex/lynepad/config.h b/keyboards/qvex/lynepad/config.h index e266f72ad5..85f31bf5a8 100644 --- a/keyboards/qvex/lynepad/config.h +++ b/keyboards/qvex/lynepad/config.h @@ -28,10 +28,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #define RGBLIGHT_EFFECT_RGB_TEST #define RGBLIGHT_EFFECT_ALTERNATING #define RGBLIGHT_EFFECT_TWINKLE -#define RGBLED_NUM 4 -#define RGBLIGHT_HUE_STEP 8 -#define RGBLIGHT_SAT_STEP 8 -#define RGBLIGHT_VAL_STEP 8 /* Definitions for encoder tilt/press support */ #define ENC_TILT_THRESHOLD 1 diff --git a/keyboards/qvex/lynepad/info.json b/keyboards/qvex/lynepad/info.json index fa8b71b5d6..e1205383f4 100644 --- a/keyboards/qvex/lynepad/info.json +++ b/keyboards/qvex/lynepad/info.json @@ -23,6 +23,9 @@ "pin": "D3" }, "rgblight": { + "saturation_steps": 8, + "brightness_steps": 8, + "led_count": 4, "max_brightness": 240 }, "processor": "atmega32u4", diff --git a/keyboards/qwertyydox/config.h b/keyboards/qwertyydox/config.h index 8bc386dcab..8e784c3b9c 100644 --- a/keyboards/qwertyydox/config.h +++ b/keyboards/qwertyydox/config.h @@ -17,11 +17,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #pragma once - #define RGBLED_NUM 12 - #define RGBLIGHT_HUE_STEP 8 - #define RGBLIGHT_SAT_STEP 8 - #define RGBLIGHT_VAL_STEP 8 - #define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */ #define RGBLIGHT_EFFECT_BREATHING #define RGBLIGHT_EFFECT_RAINBOW_MOOD #define RGBLIGHT_EFFECT_RAINBOW_SWIRL diff --git a/keyboards/qwertyydox/info.json b/keyboards/qwertyydox/info.json index fcc14084b0..50fabb49db 100644 --- a/keyboards/qwertyydox/info.json +++ b/keyboards/qwertyydox/info.json @@ -13,6 +13,12 @@ "cols": ["F7", "F6", "F5", "C6", "D7", "D4", "D1"], "rows": ["B6", "B2", "B3", "B1"] }, + "rgblight": { + "saturation_steps": 8, + "brightness_steps": 8, + "led_count": 12, + "sleep": true + }, "ws2812": { "pin": "D6" }, diff --git a/keyboards/rainkeebs/delilah/config.h b/keyboards/rainkeebs/delilah/config.h index 3f9d574f77..d89d0648cb 100644 --- a/keyboards/rainkeebs/delilah/config.h +++ b/keyboards/rainkeebs/delilah/config.h @@ -31,7 +31,3 @@ #define RGBLIGHT_EFFECT_RGB_TEST #define RGBLIGHT_EFFECT_ALTERNATING #define RGBLIGHT_EFFECT_TWINKLE -#define RGBLED_NUM 8 -#define RGBLIGHT_HUE_STEP 8 -#define RGBLIGHT_SAT_STEP 8 -#define RGBLIGHT_VAL_STEP 8 diff --git a/keyboards/rainkeebs/delilah/info.json b/keyboards/rainkeebs/delilah/info.json index 891c484778..930d6dd901 100644 --- a/keyboards/rainkeebs/delilah/info.json +++ b/keyboards/rainkeebs/delilah/info.json @@ -8,6 +8,11 @@ "pid": "0x645C", "device_version": "0.0.1" }, + "rgblight": { + "saturation_steps": 8, + "brightness_steps": 8, + "led_count": 8 + }, "ws2812": { "pin": "B3" }, diff --git a/keyboards/rainkeebs/yasui/config.h b/keyboards/rainkeebs/yasui/config.h index 5033c1ceac..d89d0648cb 100644 --- a/keyboards/rainkeebs/yasui/config.h +++ b/keyboards/rainkeebs/yasui/config.h @@ -31,7 +31,3 @@ #define RGBLIGHT_EFFECT_RGB_TEST #define RGBLIGHT_EFFECT_ALTERNATING #define RGBLIGHT_EFFECT_TWINKLE -#define RGBLED_NUM 10 -#define RGBLIGHT_HUE_STEP 8 -#define RGBLIGHT_SAT_STEP 8 -#define RGBLIGHT_VAL_STEP 8 diff --git a/keyboards/rainkeebs/yasui/info.json b/keyboards/rainkeebs/yasui/info.json index c1c874c77b..d58b272597 100644 --- a/keyboards/rainkeebs/yasui/info.json +++ b/keyboards/rainkeebs/yasui/info.json @@ -8,6 +8,11 @@ "pid": "0x7973", "device_version": "0.0.1" }, + "rgblight": { + "saturation_steps": 8, + "brightness_steps": 8, + "led_count": 10 + }, "ws2812": { "pin": "D1" }, diff --git a/keyboards/rart/rart4x4/config.h b/keyboards/rart/rart4x4/config.h index 76ffbba1cf..cc0f4f0e89 100644 --- a/keyboards/rart/rart4x4/config.h +++ b/keyboards/rart/rart4x4/config.h @@ -33,8 +33,3 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #define RGBLIGHT_EFFECT_RGB_TEST #define RGBLIGHT_EFFECT_ALTERNATING #define RGBLIGHT_EFFECT_TWINKLE -#define RGBLED_NUM 7 -#define RGBLIGHT_HUE_STEP 8 -#define RGBLIGHT_SAT_STEP 8 -#define RGBLIGHT_VAL_STEP 8 -#define RGBLIGHT_SLEEP diff --git a/keyboards/rart/rart4x4/info.json b/keyboards/rart/rart4x4/info.json index 3cd5710ddf..980a2b6bfb 100644 --- a/keyboards/rart/rart4x4/info.json +++ b/keyboards/rart/rart4x4/info.json @@ -12,7 +12,11 @@ "pin": "D3" }, "rgblight": { - "max_brightness": 240 + "saturation_steps": 8, + "brightness_steps": 8, + "led_count": 7, + "max_brightness": 240, + "sleep": true }, "matrix_pins": { "cols": ["F7", "B2", "B5", "B4"], diff --git a/keyboards/rart/rart67/config.h b/keyboards/rart/rart67/config.h index 21a2aba522..cc0f4f0e89 100644 --- a/keyboards/rart/rart67/config.h +++ b/keyboards/rart/rart67/config.h @@ -33,8 +33,3 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #define RGBLIGHT_EFFECT_RGB_TEST #define RGBLIGHT_EFFECT_ALTERNATING #define RGBLIGHT_EFFECT_TWINKLE -#define RGBLED_NUM 11 -#define RGBLIGHT_HUE_STEP 8 -#define RGBLIGHT_SAT_STEP 8 -#define RGBLIGHT_VAL_STEP 8 -#define RGBLIGHT_SLEEP diff --git a/keyboards/rart/rart67/info.json b/keyboards/rart/rart67/info.json index d12df10ae1..bd3ed061ec 100644 --- a/keyboards/rart/rart67/info.json +++ b/keyboards/rart/rart67/info.json @@ -12,7 +12,11 @@ "pin": "B7" }, "rgblight": { - "max_brightness": 240 + "saturation_steps": 8, + "brightness_steps": 8, + "led_count": 11, + "max_brightness": 240, + "sleep": true }, "matrix_pins": { "cols": ["B3", "B2", "B1", "D5", "D4", "D6", "D7", "B4", "B5", "F0", "F7", "F6", "F5", "F4", "F1", "E6"], diff --git a/keyboards/rart/rart75hs/config.h b/keyboards/rart/rart75hs/config.h index 26adeb96a7..fbe2c720a0 100644 --- a/keyboards/rart/rart75hs/config.h +++ b/keyboards/rart/rart75hs/config.h @@ -29,9 +29,3 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #define RGBLIGHT_EFFECT_KNIGHT #define RGBLIGHT_EFFECT_STATIC_GRADIENT #define RGBLIGHT_EFFECT_TWINKLE -/* You can change the number of RGB strip */ -#define RGBLED_NUM 11 -#define RGBLIGHT_HUE_STEP 8 -#define RGBLIGHT_SAT_STEP 8 -#define RGBLIGHT_VAL_STEP 8 -#define RGBLIGHT_SLEEP diff --git a/keyboards/rart/rart75hs/info.json b/keyboards/rart/rart75hs/info.json index 80b09b6357..e3a2cb7a3f 100644 --- a/keyboards/rart/rart75hs/info.json +++ b/keyboards/rart/rart75hs/info.json @@ -26,7 +26,11 @@ "pin": "C0" }, "rgblight": { - "max_brightness": 240 + "saturation_steps": 8, + "brightness_steps": 8, + "led_count": 11, + "max_brightness": 240, + "sleep": true }, "bootmagic": { "matrix": [0, 1] diff --git a/keyboards/rart/rart80/config.h b/keyboards/rart/rart80/config.h index 4c08a231aa..fbe2c720a0 100644 --- a/keyboards/rart/rart80/config.h +++ b/keyboards/rart/rart80/config.h @@ -29,9 +29,3 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #define RGBLIGHT_EFFECT_KNIGHT #define RGBLIGHT_EFFECT_STATIC_GRADIENT #define RGBLIGHT_EFFECT_TWINKLE -/* You can change the number of RGB strip */ -#define RGBLED_NUM 6 -#define RGBLIGHT_HUE_STEP 8 -#define RGBLIGHT_SAT_STEP 8 -#define RGBLIGHT_VAL_STEP 8 -#define RGBLIGHT_SLEEP diff --git a/keyboards/rart/rart80/info.json b/keyboards/rart/rart80/info.json index 5b9f768c74..787363a881 100644 --- a/keyboards/rart/rart80/info.json +++ b/keyboards/rart/rart80/info.json @@ -21,7 +21,11 @@ "pin": "D5" }, "rgblight": { - "max_brightness": 240 + "saturation_steps": 8, + "brightness_steps": 8, + "led_count": 6, + "max_brightness": 240, + "sleep": true }, "bootmagic": { "matrix": [0, 1] diff --git a/keyboards/rart/rartlice/config.h b/keyboards/rart/rartlice/config.h index b242e63013..f5b050fa4e 100644 --- a/keyboards/rart/rartlice/config.h +++ b/keyboards/rart/rartlice/config.h @@ -32,7 +32,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #define RGBLIGHT_EFFECT_RGB_TEST #define RGBLIGHT_EFFECT_ALTERNATING #define RGBLIGHT_EFFECT_TWINKLE -#define RGBLED_NUM 11 #define WS2812_SPI SPID2 /* diff --git a/keyboards/rart/rartlice/info.json b/keyboards/rart/rartlice/info.json index b1046227cc..56266f3845 100644 --- a/keyboards/rart/rartlice/info.json +++ b/keyboards/rart/rartlice/info.json @@ -19,6 +19,9 @@ "scroll_lock": "A9", "on_state": 0 }, + "rgblight": { + "led_count": 11 + }, "ws2812": { "pin": "B15", "driver": "spi" diff --git a/keyboards/rart/rartlice/rules.mk b/keyboards/rart/rartlice/rules.mk index 49179d2fb9..47297d817f 100644 --- a/keyboards/rart/rartlice/rules.mk +++ b/keyboards/rart/rartlice/rules.mk @@ -14,5 +14,3 @@ SLEEP_LED_ENABLE = yes OLED_ENABLE = yes OLED_DRIVER = SSD1306 -# Enter lower-power sleep mode when on the ChibiOS idle thread -OPT_DEFS += -DCORTEX_ENABLE_WFI_IDLE=TRUE diff --git a/keyboards/rart/rartpad/config.h b/keyboards/rart/rartpad/config.h index bf87b3204d..cc0f4f0e89 100644 --- a/keyboards/rart/rartpad/config.h +++ b/keyboards/rart/rartpad/config.h @@ -33,8 +33,3 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #define RGBLIGHT_EFFECT_RGB_TEST #define RGBLIGHT_EFFECT_ALTERNATING #define RGBLIGHT_EFFECT_TWINKLE -#define RGBLED_NUM 5 -#define RGBLIGHT_HUE_STEP 8 -#define RGBLIGHT_SAT_STEP 8 -#define RGBLIGHT_VAL_STEP 8 -#define RGBLIGHT_SLEEP diff --git a/keyboards/rart/rartpad/info.json b/keyboards/rart/rartpad/info.json index 01929e0176..298ac75da8 100644 --- a/keyboards/rart/rartpad/info.json +++ b/keyboards/rart/rartpad/info.json @@ -26,7 +26,11 @@ "pin": "F7" }, "rgblight": { - "max_brightness": 240 + "saturation_steps": 8, + "brightness_steps": 8, + "led_count": 5, + "max_brightness": 240, + "sleep": true }, "processor": "atmega32u4", "bootloader": "caterina", diff --git a/keyboards/rastersoft/minitkl/info.json b/keyboards/rastersoft/minitkl/info.json new file mode 100644 index 0000000000..7de5b4f75d --- /dev/null +++ b/keyboards/rastersoft/minitkl/info.json @@ -0,0 +1,339 @@ +{ + "keyboard_name": "MiniTKL", + "manufacturer": "Rastersoft", + "url": "https://gitlab.com/rastersoft/full-ten-keyless", + "maintainer": "rastersoft", + "processor": "atmega32u4", + "bootloader": "atmel-dfu", + "usb": { + "vid": "0xFEED", + "pid": "0x68F1", + "device_version": "0.0.1" + }, + "diode_direction": "COL2ROW", + "matrix_pins": { + "rows": ["D6", "D4", "B6", "D5", "B4", "D3", "D7", "D1", "C6", "D2", "C7", "D0"], + "cols": ["F4", "F1", "F0", "F5", "F6", "F7", "B7", "B5"] + }, + "features": { + "bootmagic": true, + "extrakey": true, + "mousekey": true, + "rgblight": true + }, + "rgblight": { + "led_count": 3, + "pin": "B2", + "hue_steps": 8, + "saturation_steps": 8, + "brightness_steps": 8, + "animations": { + "alternating": true, + "breathing": true, + "christmas": true, + "knight": true, + "rainbow_mood": true, + "rainbow_swirl": true, + "rgb_test": true, + "snake": true, + "static_gradient": true, + "twinkle": true + }, + "layers": { + "enabled": true + } + }, + "ws2812": { + "pin": "B2" + }, + "layouts": { + "LAYOUT_iso": { + "layout": [ + {"label":"esc", "x":0, "y":0, "matrix": [0, 0]}, + {"label":"F1", "x":1, "y":0, "matrix": [0, 1]}, + {"label":"F2", "x":2, "y":0, "matrix": [0, 2]}, + {"label":"F3", "x":3, "y":0, "matrix": [0, 3]}, + {"label":"F4", "x":4, "y":0, "matrix": [0, 4]}, + {"label":"F5", "x":5, "y":0, "matrix": [0, 5]}, + {"label":"F6", "x":6, "y":0, "matrix": [0, 6]}, + {"label":"F7", "x":7, "y":0, "matrix": [0, 7]}, + {"label":"F8", "x":8, "y":0, "matrix": [1, 7]}, + {"label":"F9", "x":9, "y":0, "matrix": [1, 6]}, + {"label":"F10", "x":10, "y":0, "matrix": [1, 5]}, + {"label":"F11", "x":11, "y":0, "matrix": [1, 4]}, + {"label":"F12", "x":12, "y":0, "matrix": [1, 3]}, + {"label":"PrtScr", "x":13, "y":0, "matrix": [1, 2]}, + {"label":"ScrollLock", "x":14, "y":0, "matrix": [1, 1]}, + {"label":"Pause", "x":15, "y":0, "matrix": [1, 0]}, + + {"label":"º", "x":0, "y":1, "matrix": [2, 0]}, + {"label":"1", "x":1, "y":1, "matrix": [2, 1]}, + {"label":"2", "x":2, "y":1, "matrix": [2, 2]}, + {"label":"3", "x":3, "y":1, "matrix": [2, 3]}, + {"label":"4", "x":4, "y":1, "matrix": [2, 4]}, + {"label":"5", "x":5, "y":1, "matrix": [2, 5]}, + {"label":"6", "x":6, "y":1, "matrix": [2, 6]}, + {"label":"7", "x":7, "y":1, "matrix": [2, 7]}, + {"label":"8", "x":8, "y":1, "matrix": [3, 7]}, + {"label":"9", "x":9, "y":1, "matrix": [3, 6]}, + {"label":"0", "x":10, "y":1, "matrix": [3, 5]}, + {"label":"'", "x":11, "y":1, "matrix": [3, 4]}, + {"label":"\u00bf", "x":12, "y":1, "matrix": [3, 3]}, + {"label":"Backspace", "x":13, "y":1, "matrix": [3, 2], "w":2}, + {"label":"Home", "x":15, "y":1, "matrix": [3, 1]}, + {"label":"End", "x":16, "y":1, "matrix": [3, 0]}, + + {"label":"Tab", "x":0, "y":2, "w":1.5, "matrix": [4, 0]}, + {"label":"Q", "x":1.5, "y":2, "matrix": [4, 1]}, + {"label":"W", "x":2.5, "y":2, "matrix": [4, 2]}, + {"label":"E", "x":3.5, "y":2, "matrix": [4, 3]}, + {"label":"R", "x":4.5, "y":2, "matrix": [4, 4]}, + {"label":"T", "x":5.5, "y":2, "matrix": [4, 5]}, + {"label":"Y", "x":6.5, "y":2, "matrix": [4, 6]}, + {"label":"U", "x":7.5, "y":2, "matrix": [4, 7]}, + {"label":"I", "x":8.5, "y":2, "matrix": [5, 7]}, + {"label":"O", "x":9.5, "y":2, "matrix": [5, 6]}, + {"label":"P", "x":10.5, "y":2, "matrix": [5, 5]}, + {"label":"^", "x":11.5, "y":2, "matrix": [5, 4]}, + {"label":"*", "x":12.5, "y":2, "matrix": [5, 3]}, + {"label":"Insert", "x":15, "y":2, "matrix": [5, 1]}, + {"label":"PgUp", "x":15, "y":2, "matrix": [5, 0]}, + + {"label":"Shift Lock", "x":0, "y":3, "w":1.75, "matrix": [6, 0]}, + {"label":"A", "x":1.75, "y":3, "matrix": [6, 1]}, + {"label":"S", "x":2.75, "y":3, "matrix": [6, 2]}, + {"label":"D", "x":3.75, "y":3, "matrix": [6, 3]}, + {"label":"F", "x":4.75, "y":3, "matrix": [6, 4]}, + {"label":"G", "x":5.75, "y":3, "matrix": [6, 5]}, + {"label":"H", "x":6.75, "y":3, "matrix": [6, 6]}, + {"label":"J", "x":7.75, "y":3, "matrix": [6, 7]}, + {"label":"K", "x":8.75, "y":3, "matrix": [7, 7]}, + {"label":"L", "x":9.75, "y":3, "matrix": [7, 6]}, + {"label":"\u00d1", "x":10.75, "y":3, "matrix": [7, 5]}, + {"label":"\u00a8", "x":11.75, "y":3, "matrix": [7, 4]}, + {"label":"ç", "x":12.75, "y":3, "matrix": [7, 3]}, + {"label":"Return", "x":13.75, "y":2, "w":1.25, "h":2, "matrix": [5, 2]}, + {"label":"Del", "x":15, "y":3, "matrix": [7, 1]}, + {"label":"PgDow", "x":16, "y":3, "matrix": [7, 0]}, + + {"label":"Shift", "x":0, "y":4, "w":1.25, "matrix": [8, 0]}, + {"label":">", "x":1.25, "y":4, "matrix": [8, 1]}, + {"label":"Z", "x":2.25, "y":4, "matrix": [8, 2]}, + {"label":"X", "x":3.25, "y":4, "matrix": [8, 3]}, + {"label":"C", "x":4.25, "y":4, "matrix": [8, 4]}, + {"label":"V", "x":5.25, "y":4, "matrix": [8, 5]}, + {"label":"B", "x":6.25, "y":4, "matrix": [8, 6]}, + {"label":"N", "x":7.25, "y":4, "matrix": [8, 7]}, + {"label":"M", "x":8.25, "y":4, "matrix": [9, 7]}, + {"label":";", "x":9.25, "y":4, "matrix": [9, 6]}, + {"label":":", "x":10.25, "y":4, "matrix": [9, 5]}, + {"label":"_", "x":11.25, "y":4, "matrix": [9, 4]}, + {"label":"Shift", "x":12.25, "y":4, "w":2.75, "matrix": [9, 3]}, + {"label":"Up", "x":15, "y":4, "matrix": [9, 1]}, + {"label":"Fn", "x":16, "y":4, "matrix": [9, 0]}, + + {"label":"Ctrl", "x":0, "y":5, "w":1.25, "matrix": [10, 0]}, + {"label":"Mod", "x":1.25, "y":5, "w":1.25, "matrix": [10, 1]}, + {"label":"Alt", "x":2.25, "y":5, "w":1.25, "matrix": [10, 2]}, + {"label":"Space", "x":3.5, "y":5, "w":6.5, "matrix": [10, 6]}, + {"label":"AltGr", "x":10, "y":5, "w":1.25, "matrix": [11, 5]}, + {"label":"Menu", "x":11, "y":5, "w":1.25, "matrix": [11, 4]}, + {"label":"Ctrl", "x":12, "y":5, "w":1.25, "matrix": [11, 3]}, + {"label":"Left", "x":13, "y":5, "matrix": [11, 2]}, + {"label":"Bottom", "x":14, "y":5, "matrix": [11, 1]}, + {"label":"Right", "x":15, "y":5, "matrix": [11, 0]} + ] + },"LAYOUT_ansi": { + "layout": [ + {"label":"esc", "x":0, "y":0, "matrix": [0, 0]}, + {"label":"F1", "x":1, "y":0, "matrix": [0, 1]}, + {"label":"F2", "x":2, "y":0, "matrix": [0, 2]}, + {"label":"F3", "x":3, "y":0, "matrix": [0, 3]}, + {"label":"F4", "x":4, "y":0, "matrix": [0, 4]}, + {"label":"F5", "x":5, "y":0, "matrix": [0, 5]}, + {"label":"F6", "x":6, "y":0, "matrix": [0, 6]}, + {"label":"F7", "x":7, "y":0, "matrix": [0, 7]}, + {"label":"F8", "x":8, "y":0, "matrix": [1, 7]}, + {"label":"F9", "x":9, "y":0, "matrix": [1, 6]}, + {"label":"F10", "x":10, "y":0, "matrix": [1, 5]}, + {"label":"F11", "x":11, "y":0, "matrix": [1, 4]}, + {"label":"F12", "x":12, "y":0, "matrix": [1, 3]}, + {"label":"PrtScr", "x":13, "y":0, "matrix": [1, 2]}, + {"label":"ScrollLock", "x":14, "y":0, "matrix": [1, 1]}, + {"label":"Pause", "x":15, "y":0, "matrix": [1, 0]}, + + {"label":"º", "x":0, "y":1, "matrix": [2, 0]}, + {"label":"1", "x":1, "y":1, "matrix": [2, 1]}, + {"label":"2", "x":2, "y":1, "matrix": [2, 2]}, + {"label":"3", "x":3, "y":1, "matrix": [2, 3]}, + {"label":"4", "x":4, "y":1, "matrix": [2, 4]}, + {"label":"5", "x":5, "y":1, "matrix": [2, 5]}, + {"label":"6", "x":6, "y":1, "matrix": [2, 6]}, + {"label":"7", "x":7, "y":1, "matrix": [2, 7]}, + {"label":"8", "x":8, "y":1, "matrix": [3, 7]}, + {"label":"9", "x":9, "y":1, "matrix": [3, 6]}, + {"label":"0", "x":10, "y":1, "matrix": [3, 5]}, + {"label":"-", "x":11, "y":1, "matrix": [3, 4]}, + {"label":"=", "x":12, "y":1, "matrix": [3, 3]}, + {"label":"Backspace", "x":13, "y":1, "matrix": [3, 2], "w":2}, + {"label":"Home", "x":15, "y":1, "matrix": [3, 1]}, + {"label":"End", "x":16, "y":1, "matrix": [3, 0]}, + + {"label":"Tab", "x":0, "y":2, "w":1.5, "matrix": [4, 0]}, + {"label":"Q", "x":1.5, "y":2, "matrix": [4, 1]}, + {"label":"W", "x":2.5, "y":2, "matrix": [4, 2]}, + {"label":"E", "x":3.5, "y":2, "matrix": [4, 3]}, + {"label":"R", "x":4.5, "y":2, "matrix": [4, 4]}, + {"label":"T", "x":5.5, "y":2, "matrix": [4, 5]}, + {"label":"Y", "x":6.5, "y":2, "matrix": [4, 6]}, + {"label":"U", "x":7.5, "y":2, "matrix": [4, 7]}, + {"label":"I", "x":8.5, "y":2, "matrix": [5, 7]}, + {"label":"O", "x":9.5, "y":2, "matrix": [5, 6]}, + {"label":"P", "x":10.5, "y":2, "matrix": [5, 5]}, + {"label":"[", "x":11.5, "y":2, "matrix": [5, 4]}, + {"label":"]", "x":12.5, "y":2, "matrix": [5, 3]}, + {"label":"|", "x":13.75, "y":2, "w":1.25, "matrix": [5, 2]}, + {"label":"Insert", "x":15, "y":2, "matrix": [5, 1]}, + {"label":"PgUp", "x":15, "y":2, "matrix": [5, 0]}, + + {"label":"Shift Lock", "x":0, "y":3, "w":1.75, "matrix": [6, 0]}, + {"label":"A", "x":1.75, "y":3, "matrix": [6, 1]}, + {"label":"S", "x":2.75, "y":3, "matrix": [6, 2]}, + {"label":"D", "x":3.75, "y":3, "matrix": [6, 3]}, + {"label":"F", "x":4.75, "y":3, "matrix": [6, 4]}, + {"label":"G", "x":5.75, "y":3, "matrix": [6, 5]}, + {"label":"H", "x":6.75, "y":3, "matrix": [6, 6]}, + {"label":"J", "x":7.75, "y":3, "matrix": [6, 7]}, + {"label":"K", "x":8.75, "y":3, "matrix": [7, 7]}, + {"label":"L", "x":9.75, "y":3, "matrix": [7, 6]}, + {"label":";", "x":10.75, "y":3, "matrix": [7, 5]}, + {"label":"\u00a8", "x":11.75, "y":3, "matrix": [7, 4]}, + {"label":"Return", "x":12.75, "y":3, "w":2.25, "matrix": [7, 3]}, + {"label":"Del", "x":15, "y":3, "matrix": [7, 1]}, + {"label":"PgDow", "x":16, "y":3, "matrix": [7, 0]}, + + {"label":"Shift", "x":0, "y":4, "w":2.25, "matrix": [8, 0]}, + {"label":"Z", "x":2.25, "y":4, "matrix": [8, 2]}, + {"label":"X", "x":3.25, "y":4, "matrix": [8, 3]}, + {"label":"C", "x":4.25, "y":4, "matrix": [8, 4]}, + {"label":"V", "x":5.25, "y":4, "matrix": [8, 5]}, + {"label":"B", "x":6.25, "y":4, "matrix": [8, 6]}, + {"label":"N", "x":7.25, "y":4, "matrix": [8, 7]}, + {"label":"M", "x":8.25, "y":4, "matrix": [9, 7]}, + {"label":";", "x":9.25, "y":4, "matrix": [9, 6]}, + {"label":":", "x":10.25, "y":4, "matrix": [9, 5]}, + {"label":"_", "x":11.25, "y":4, "matrix": [9, 4]}, + {"label":"Shift", "x":12.25, "y":4, "w":2.75, "matrix": [9, 3]}, + {"label":"Up", "x":15, "y":4, "matrix": [9, 1]}, + {"label":"Fn", "x":16, "y":4, "matrix": [9, 0]}, + + {"label":"Ctrl", "x":0, "y":5, "w":1.25, "matrix": [10, 0]}, + {"label":"Mod", "x":1.25, "y":5, "w":1.25, "matrix": [10, 1]}, + {"label":"Alt", "x":2.25, "y":5, "w":1.25, "matrix": [10, 2]}, + {"label":"Space", "x":3.5, "y":5, "w":6.5, "matrix": [10, 6]}, + {"label":"AltGr", "x":10, "y":5, "w":1.25, "matrix": [11, 5]}, + {"label":"Menu", "x":11, "y":5, "w":1.25, "matrix": [11, 4]}, + {"label":"Ctrl", "x":12, "y":5, "w":1.25, "matrix": [11, 3]}, + {"label":"Left", "x":13, "y":5, "matrix": [11, 2]}, + {"label":"Bottom", "x":14, "y":5, "matrix": [11, 1]}, + {"label":"Right", "x":15, "y":5, "matrix": [11, 0]} + ] + },"LAYOUT_hybrid": { + "layout": [ + {"label":"esc", "x":0, "y":0, "matrix": [0, 0]}, + {"label":"F1", "x":1, "y":0, "matrix": [0, 1]}, + {"label":"F2", "x":2, "y":0, "matrix": [0, 2]}, + {"label":"F3", "x":3, "y":0, "matrix": [0, 3]}, + {"label":"F4", "x":4, "y":0, "matrix": [0, 4]}, + {"label":"F5", "x":5, "y":0, "matrix": [0, 5]}, + {"label":"F6", "x":6, "y":0, "matrix": [0, 6]}, + {"label":"F7", "x":7, "y":0, "matrix": [0, 7]}, + {"label":"F8", "x":8, "y":0, "matrix": [1, 7]}, + {"label":"F9", "x":9, "y":0, "matrix": [1, 6]}, + {"label":"F10", "x":10, "y":0, "matrix": [1, 5]}, + {"label":"F11", "x":11, "y":0, "matrix": [1, 4]}, + {"label":"F12", "x":12, "y":0, "matrix": [1, 3]}, + {"label":"PrtScr", "x":13, "y":0, "matrix": [1, 2]}, + {"label":"ScrollLock", "x":14, "y":0, "matrix": [1, 1]}, + {"label":"Pause", "x":15, "y":0, "matrix": [1, 0]}, + + {"label":"º", "x":0, "y":1, "matrix": [2, 0]}, + {"label":"1", "x":1, "y":1, "matrix": [2, 1]}, + {"label":"2", "x":2, "y":1, "matrix": [2, 2]}, + {"label":"3", "x":3, "y":1, "matrix": [2, 3]}, + {"label":"4", "x":4, "y":1, "matrix": [2, 4]}, + {"label":"5", "x":5, "y":1, "matrix": [2, 5]}, + {"label":"6", "x":6, "y":1, "matrix": [2, 6]}, + {"label":"7", "x":7, "y":1, "matrix": [2, 7]}, + {"label":"8", "x":8, "y":1, "matrix": [3, 7]}, + {"label":"9", "x":9, "y":1, "matrix": [3, 6]}, + {"label":"0", "x":10, "y":1, "matrix": [3, 5]}, + {"label":"-", "x":11, "y":1, "matrix": [3, 4]}, + {"label":"=", "x":12, "y":1, "matrix": [3, 3]}, + {"label":"Backspace", "x":13, "y":1, "matrix": [3, 2], "w":2}, + {"label":"Home", "x":15, "y":1, "matrix": [3, 1]}, + {"label":"End", "x":16, "y":1, "matrix": [3, 0]}, + + {"label":"Tab", "x":0, "y":2, "w":1.5, "matrix": [4, 0]}, + {"label":"Q", "x":1.5, "y":2, "matrix": [4, 1]}, + {"label":"W", "x":2.5, "y":2, "matrix": [4, 2]}, + {"label":"E", "x":3.5, "y":2, "matrix": [4, 3]}, + {"label":"R", "x":4.5, "y":2, "matrix": [4, 4]}, + {"label":"T", "x":5.5, "y":2, "matrix": [4, 5]}, + {"label":"Y", "x":6.5, "y":2, "matrix": [4, 6]}, + {"label":"U", "x":7.5, "y":2, "matrix": [4, 7]}, + {"label":"I", "x":8.5, "y":2, "matrix": [5, 7]}, + {"label":"O", "x":9.5, "y":2, "matrix": [5, 6]}, + {"label":"P", "x":10.5, "y":2, "matrix": [5, 5]}, + {"label":"[", "x":11.5, "y":2, "matrix": [5, 4]}, + {"label":"]", "x":12.5, "y":2, "matrix": [5, 3]}, + {"label":"|", "x":13.75, "y":2, "w":1.25, "matrix": [5, 2]}, + {"label":"Insert", "x":15, "y":2, "matrix": [5, 1]}, + {"label":"PgUp", "x":15, "y":2, "matrix": [5, 0]}, + + {"label":"Shift Lock", "x":0, "y":3, "w":1.75, "matrix": [6, 0]}, + {"label":"A", "x":1.75, "y":3, "matrix": [6, 1]}, + {"label":"S", "x":2.75, "y":3, "matrix": [6, 2]}, + {"label":"D", "x":3.75, "y":3, "matrix": [6, 3]}, + {"label":"F", "x":4.75, "y":3, "matrix": [6, 4]}, + {"label":"G", "x":5.75, "y":3, "matrix": [6, 5]}, + {"label":"H", "x":6.75, "y":3, "matrix": [6, 6]}, + {"label":"J", "x":7.75, "y":3, "matrix": [6, 7]}, + {"label":"K", "x":8.75, "y":3, "matrix": [7, 7]}, + {"label":"L", "x":9.75, "y":3, "matrix": [7, 6]}, + {"label":";", "x":10.75, "y":3, "matrix": [7, 5]}, + {"label":"\u00a8", "x":11.75, "y":3, "matrix": [7, 4]}, + {"label":"Return", "x":12.75, "y":3, "w":2.25, "matrix": [7, 3]}, + {"label":"Del", "x":15, "y":3, "matrix": [7, 1]}, + {"label":"PgDow", "x":16, "y":3, "matrix": [7, 0]}, + + {"label":"Shift", "x":0, "y":4, "w":1.25, "matrix": [8, 0]}, + {"label":">", "x":1.25, "y":4, "matrix": [8, 1]}, + {"label":"Z", "x":2.25, "y":4, "matrix": [8, 2]}, + {"label":"X", "x":3.25, "y":4, "matrix": [8, 3]}, + {"label":"C", "x":4.25, "y":4, "matrix": [8, 4]}, + {"label":"V", "x":5.25, "y":4, "matrix": [8, 5]}, + {"label":"B", "x":6.25, "y":4, "matrix": [8, 6]}, + {"label":"N", "x":7.25, "y":4, "matrix": [8, 7]}, + {"label":"M", "x":8.25, "y":4, "matrix": [9, 7]}, + {"label":";", "x":9.25, "y":4, "matrix": [9, 6]}, + {"label":":", "x":10.25, "y":4, "matrix": [9, 5]}, + {"label":"_", "x":11.25, "y":4, "matrix": [9, 4]}, + {"label":"Shift", "x":12.25, "y":4, "w":2.75, "matrix": [9, 3]}, + {"label":"Up", "x":15, "y":4, "matrix": [9, 1]}, + {"label":"Fn", "x":16, "y":4, "matrix": [9, 0]}, + + {"label":"Ctrl", "x":0, "y":5, "w":1.25, "matrix": [10, 0]}, + {"label":"Mod", "x":1.25, "y":5, "w":1.25, "matrix": [10, 1]}, + {"label":"Alt", "x":2.25, "y":5, "w":1.25, "matrix": [10, 2]}, + {"label":"Space", "x":3.5, "y":5, "w":6.5, "matrix": [10, 6]}, + {"label":"AltGr", "x":10, "y":5, "w":1.25, "matrix": [11, 5]}, + {"label":"Menu", "x":11, "y":5, "w":1.25, "matrix": [11, 4]}, + {"label":"Ctrl", "x":12, "y":5, "w":1.25, "matrix": [11, 3]}, + {"label":"Left", "x":13, "y":5, "matrix": [11, 2]}, + {"label":"Bottom", "x":14, "y":5, "matrix": [11, 1]}, + {"label":"Right", "x":15, "y":5, "matrix": [11, 0]} + ] + } + } +} diff --git a/keyboards/rastersoft/minitkl/keymaps/ansi/keymap.c b/keyboards/rastersoft/minitkl/keymaps/ansi/keymap.c new file mode 100644 index 0000000000..fce96e6a05 --- /dev/null +++ b/keyboards/rastersoft/minitkl/keymaps/ansi/keymap.c @@ -0,0 +1,37 @@ +/* + * Copyright 2023 Raster Software Vigo + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#include QMK_KEYBOARD_H + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + [0] = LAYOUT_ansi( + KC_ESC, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_PSCR, KC_SCRL, KC_PAUS, + KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_HOME, KC_END, + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_INS, KC_PGUP, + KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, KC_DEL, KC_PGDN, + KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_UP, LT(1, KC_APP), + KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_RALT, KC_APP, KC_RGUI, KC_LEFT, KC_DOWN, KC_RGHT + ), + [1] = LAYOUT_ansi( + XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, + XXXXXXX, RGB_TOG, RGB_MODE_FORWARD, RGB_MODE_REVERSE, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, + XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, + XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, KC_MUTE, XXXXXXX, + XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, KC_VOLU, XXXXXXX, + XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, KC_VOLD, KC_VOLD, KC_VOLU + ), +}; diff --git a/keyboards/rastersoft/minitkl/keymaps/ansi/readme.md b/keyboards/rastersoft/minitkl/keymaps/ansi/readme.md new file mode 100644 index 0000000000..7b3324b99c --- /dev/null +++ b/keyboards/rastersoft/minitkl/keymaps/ansi/readme.md @@ -0,0 +1,5 @@ +# The ANSI keymap for MiniTKL + + + +The `Fn` key trigger `KC_APP` when tapped, and activate Layer 1 when held. diff --git a/keyboards/rastersoft/minitkl/keymaps/default/keymap.c b/keyboards/rastersoft/minitkl/keymaps/default/keymap.c new file mode 100644 index 0000000000..12d9548433 --- /dev/null +++ b/keyboards/rastersoft/minitkl/keymaps/default/keymap.c @@ -0,0 +1,37 @@ +/* + * Copyright 2023 Raster Software Vigo + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#include QMK_KEYBOARD_H + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + [0] = LAYOUT_iso( + KC_ESC, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_PSCR, KC_SCRL, KC_PAUS, + KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_HOME, KC_END, + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_INS, KC_PGUP, + KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_NUHS, KC_ENT, KC_DEL, KC_PGDN, + KC_LSFT, KC_NUBS, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_UP, LT(1, KC_APP), + KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_RALT, KC_APP, KC_RGUI, KC_LEFT, KC_DOWN, KC_RGHT + ), + [1] = LAYOUT_iso( + XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, + XXXXXXX, RGB_TOG, RGB_MODE_FORWARD, RGB_MODE_REVERSE, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, + XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, + XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, KC_MUTE, XXXXXXX, + XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, KC_VOLU, XXXXXXX, + XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, KC_VOLD, KC_VOLD, KC_VOLU + ), +}; diff --git a/keyboards/rastersoft/minitkl/keymaps/default/readme.md b/keyboards/rastersoft/minitkl/keymaps/default/readme.md new file mode 100644 index 0000000000..6962acb70b --- /dev/null +++ b/keyboards/rastersoft/minitkl/keymaps/default/readme.md @@ -0,0 +1,5 @@ +# The default keymap for MiniTKL + + + +The `Fn` key trigger `KC_APP` when tapped, and activate Layer 1 when held. diff --git a/keyboards/rastersoft/minitkl/keymaps/hybrid/keymap.c b/keyboards/rastersoft/minitkl/keymaps/hybrid/keymap.c new file mode 100644 index 0000000000..a65df70573 --- /dev/null +++ b/keyboards/rastersoft/minitkl/keymaps/hybrid/keymap.c @@ -0,0 +1,37 @@ +/* + * Copyright 2023 Raster Software Vigo + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#include QMK_KEYBOARD_H + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + [0] = LAYOUT_hybrid( + KC_ESC, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_PSCR, KC_SCRL, KC_PAUS, + KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_HOME, KC_END, + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_NUHS, KC_INS, KC_PGUP, + KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, KC_DEL, KC_PGDN, + KC_LSFT, KC_NUBS, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_UP, LT(1, KC_APP), + KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_RALT, KC_APP, KC_RGUI, KC_LEFT, KC_DOWN, KC_RGHT + ), + [1] = LAYOUT_hybrid( + XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, + XXXXXXX, RGB_TOG, RGB_MODE_FORWARD, RGB_MODE_REVERSE, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, + XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, + XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, KC_MUTE, XXXXXXX, + XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, KC_VOLU, XXXXXXX, + XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, KC_VOLD, KC_VOLD, KC_VOLU + ), +}; diff --git a/keyboards/rastersoft/minitkl/keymaps/hybrid/readme.md b/keyboards/rastersoft/minitkl/keymaps/hybrid/readme.md new file mode 100644 index 0000000000..121f6277f2 --- /dev/null +++ b/keyboards/rastersoft/minitkl/keymaps/hybrid/readme.md @@ -0,0 +1,11 @@ +# The HYBRID keymap for MiniTKL + + + +This keymap is designed to be able to have an ISO keyboard with the ANSI Return +key. This is useful in, at least, two cases: + +* some programmers prefer the ANSI key, but want to use European languages. +* some keycaps come without ISO return key, even for European languages layouts. + +The `Fn` key trigger `KC_APP` when tapped, and activate Layer 1 when held. diff --git a/keyboards/rastersoft/minitkl/minitkl.c b/keyboards/rastersoft/minitkl/minitkl.c new file mode 100644 index 0000000000..3d5135b332 --- /dev/null +++ b/keyboards/rastersoft/minitkl/minitkl.c @@ -0,0 +1,54 @@ +/* + * Copyright 2023 Raster Software Vigo + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#include "quantum.h" + + +const rgblight_segment_t PROGMEM my_capslock_layer[] = RGBLIGHT_LAYER_SEGMENTS( + {0, 3, 85,255,192} // not-so-bright HSV_GREEN for CAPS LOCK +); +const rgblight_segment_t PROGMEM my_scroll_lock_layer[] = RGBLIGHT_LAYER_SEGMENTS( + {0, 3, HSV_RED} // HSV_RED for SCROLL LOCK +); +const rgblight_segment_t PROGMEM my_fn_layer[] = RGBLIGHT_LAYER_SEGMENTS( + {0, 3, HSV_ORANGE} // HSV_ORANGE for Fn key pressed +); + +const rgblight_segment_t* const PROGMEM my_rgb_layers[] = RGBLIGHT_LAYERS_LIST( + my_capslock_layer, + my_scroll_lock_layer, + my_fn_layer +); + +void keyboard_post_init_kb(void) { + // Enable the LED layers + rgblight_layers = my_rgb_layers; + keyboard_post_init_user(); +} + +bool led_update_kb(led_t led_state) { + if (led_update_user(led_state)) { + rgblight_set_layer_state(0, led_state.caps_lock); // all LEDs green in caps lock + rgblight_set_layer_state(1, led_state.scroll_lock); // all LEDs red in scroll lock + } + return true; +} + +layer_state_t layer_state_set_kb(layer_state_t state) { + rgblight_set_layer_state(2, layer_state_cmp(state, 1)); // all LEDs orange if FN is pressed + return layer_state_set_user(state); +} diff --git a/keyboards/rastersoft/minitkl/readme.md b/keyboards/rastersoft/minitkl/readme.md new file mode 100644 index 0000000000..e2f75d3989 --- /dev/null +++ b/keyboards/rastersoft/minitkl/readme.md @@ -0,0 +1,31 @@ +# MiniTKL + + + +A compact TenKeyLess keyboard. + +* Keyboard maintainer: [Sergio Costas](https://github.com/rastersoft) +* Hardware supported: ISO version. ANSI will be added in a future. +* Hardware Availability: it's a build-yourself keyboard. + +Make example for this keyboard (after setting up your build environment): + + make rastersoft/minitkl:default + +Flashing example for this keyboard: + + make rastersoft/minitkl:default:flash + + + + + +The default layout is ISO. Replace 'default' with 'ansi' for ANSI layout, or 'hybrid' for the ANSI/ISO hybrid layout. + +See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). + +## Bootloader + +* **Physical reset button**: Briefly press the button on the back of the PCB - some may have pads you must short instead + +More info: [gitlab.com/rastersoft/full-ten-keyless](https://gitlab.com/rastersoft/full-ten-keyless) diff --git a/keyboards/rastersoft/minitkl/rules.mk b/keyboards/rastersoft/minitkl/rules.mk new file mode 100644 index 0000000000..6e7633bfe0 --- /dev/null +++ b/keyboards/rastersoft/minitkl/rules.mk @@ -0,0 +1 @@ +# This file intentionally left blank diff --git a/keyboards/rate/pistachio/rev1/config.h b/keyboards/rate/pistachio/rev1/config.h index cf7e2cdfb0..cad548df8e 100644 --- a/keyboards/rate/pistachio/rev1/config.h +++ b/keyboards/rate/pistachio/rev1/config.h @@ -19,13 +19,7 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #define USE_I2C -/* ws2812 RGB LED */ -#define RGBLIGHT_SPLIT -#define RGBLED_SPLIT { 1, 1 } -#define RGBLED_NUM 2 #define RGBLIGHT_LAYERS -#define RGBLIGHT_HUE_STEP 10 -#define RGBLIGHT_SAT_STEP 17 #if defined(RGBLIGHT_ENABLE) && !defined(IOS_DEVICE_ENABLE) #define USB_MAX_POWER_CONSUMPTION 400 diff --git a/keyboards/rate/pistachio/rev1/info.json b/keyboards/rate/pistachio/rev1/info.json index a50ae8b991..2bec0c52af 100644 --- a/keyboards/rate/pistachio/rev1/info.json +++ b/keyboards/rate/pistachio/rev1/info.json @@ -1,4 +1,9 @@ { + "rgblight": { + "hue_steps": 10, + "led_count": 2, + "split_count": [1, 1] + }, "ws2812": { "pin": "D2" }, diff --git a/keyboards/rate/pistachio/rev2/config.h b/keyboards/rate/pistachio/rev2/config.h index 5ac0b8fbfa..8b5dcbc9f4 100644 --- a/keyboards/rate/pistachio/rev2/config.h +++ b/keyboards/rate/pistachio/rev2/config.h @@ -22,13 +22,7 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. /* Split hand configration */ #define SPLIT_HAND_MATRIX_GRID D4,D3 -/* ws2812 RGB LED */ -#define RGBLIGHT_SPLIT -#define RGBLED_SPLIT { 38, 46 } -#define RGBLED_NUM 84 #define RGBLIGHT_LAYERS -#define RGBLIGHT_HUE_STEP 10 -#define RGBLIGHT_SAT_STEP 17 #if defined(RGBLIGHT_ENABLE) && !defined(IOS_DEVICE_ENABLE) #define USB_MAX_POWER_CONSUMPTION 400 diff --git a/keyboards/rate/pistachio/rev2/info.json b/keyboards/rate/pistachio/rev2/info.json index a1ea3be3cb..9f0c169b87 100644 --- a/keyboards/rate/pistachio/rev2/info.json +++ b/keyboards/rate/pistachio/rev2/info.json @@ -3,7 +3,10 @@ "pin": "D2" }, "rgblight": { - "max_brightness": 195 + "hue_steps": 10, + "led_count": 84, + "max_brightness": 195, + "split_count": [38, 46] }, "matrix_pins": { "cols": ["B6", "B2", "B3", "B1", "F7", "F6", "F5", "F4", "D3"], diff --git a/keyboards/rate/pistachio_mp/config.h b/keyboards/rate/pistachio_mp/config.h index 25aac817da..eaa46500a1 100644 --- a/keyboards/rate/pistachio_mp/config.h +++ b/keyboards/rate/pistachio_mp/config.h @@ -17,9 +17,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #pragma once -#define RGBLED_NUM 3 -#define RGBLIGHT_HUE_STEP 10 -#define RGBLIGHT_SAT_STEP 17 #if defined(RGBLIGHT_ENABLE) && !defined(IOS_DEVICE_ENABLE) #define USB_MAX_POWER_CONSUMPTION 400 #else diff --git a/keyboards/rate/pistachio_mp/info.json b/keyboards/rate/pistachio_mp/info.json index 07943e5ca3..a37b55b6ab 100644 --- a/keyboards/rate/pistachio_mp/info.json +++ b/keyboards/rate/pistachio_mp/info.json @@ -9,6 +9,10 @@ "device_version": "0.0.1", "force_nkro": true }, + "rgblight": { + "hue_steps": 10, + "led_count": 3 + }, "ws2812": { "pin": "D2" }, diff --git a/keyboards/rate/pistachio_mp/keymaps/default/keymap.c b/keyboards/rate/pistachio_mp/keymaps/default/keymap.c index 86f88d9143..e73abd09eb 100644 --- a/keyboards/rate/pistachio_mp/keymaps/default/keymap.c +++ b/keyboards/rate/pistachio_mp/keymaps/default/keymap.c @@ -41,16 +41,3 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { KC_NO, KC_NO, KC_NO ) }; -#ifdef ENCODER_ENABLE -bool encoder_update_user(uint8_t index, bool clockwise) { - if (index == 0) { - // Volume control - if (clockwise) { - tap_code(KC_VOLU); - } else { - tap_code(KC_VOLD); - } - } - return true; -} -#endif diff --git a/keyboards/rate/pistachio_mp/keymaps/via/keymap.c b/keyboards/rate/pistachio_mp/keymaps/via/keymap.c index f459a76970..5e4dc36887 100644 --- a/keyboards/rate/pistachio_mp/keymaps/via/keymap.c +++ b/keyboards/rate/pistachio_mp/keymaps/via/keymap.c @@ -23,29 +23,10 @@ enum layer_names { _RESERVE_1 }; -static uint8_t encoder_state = 0; -static const keypos_t ENC_CW = {.row = 3, .col = 3}; -static const keypos_t ENC_CCW = {.row = 4, .col = 1}; - -#define LAYOUT_via( \ - ECW,ECCW, K07, \ - K00, K01, K02, K03, \ - K04, K05, K06, \ - K08, K09, K10, K11, \ - K12, K13, K14, \ - K15, K16, K17 ) { \ - { K00, K01, K02, K03 }, \ - { K04, K05, K06, K07 }, \ - { K08, K09, K10, K11 }, \ - { K12, K13, K14, ECCW }, \ - { K15, ECW, K16, K17 }, \ -} - - const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { /* Base */ - [_BASE] = LAYOUT_via( - KC_VOLU,KC_VOLD,KC_MPLY, + [_BASE] = LAYOUT( + KC_MPLY, LT(_FN, KC_NUM), KC_PSLS, KC_PAST, KC_PMNS, KC_P7, KC_P8, KC_P9, KC_P4, KC_P5, KC_P6, KC_PPLS, @@ -53,8 +34,8 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { KC_P0, KC_PDOT, KC_PENT ), /* Fn */ - [_FN] = LAYOUT_via( - KC_VOLU,KC_VOLD,KC_NO, + [_FN] = LAYOUT( + KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, RGB_HUI, RGB_SAI, RGB_VAI, RGB_HUD, RGB_SAD, RGB_VAD, RGB_TOG, @@ -62,8 +43,8 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { KC_NO, KC_NO, KC_NO ), /* Reserve */ - [_RESERVE_0] = LAYOUT_via( - KC_VOLU,KC_VOLD,KC_TRNS, + [_RESERVE_0] = LAYOUT( + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, @@ -71,8 +52,8 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { KC_TRNS, KC_TRNS, KC_TRNS ), /* Reserve */ - [_RESERVE_1] = LAYOUT_via( - KC_VOLU,KC_VOLD,KC_TRNS, + [_RESERVE_1] = LAYOUT( + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, @@ -81,43 +62,11 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { ), }; -#ifdef ENCODER_ENABLE -void encoder_action_unregister(void) { - if (encoder_state) { - keyevent_t encoder_event = (keyevent_t) { - .key = encoder_state >> 1 ? ENC_CW : ENC_CCW, - .pressed = false, - .time = timer_read(), - .type = KEY_EVENT - }; - encoder_state = 0; - action_exec(encoder_event); - } - return; -} - -void encoder_action_register(uint8_t index, bool clockwise) { - keyevent_t encoder_event = (keyevent_t) { - .key = clockwise ? ENC_CW : ENC_CCW, - .pressed = true, - .time = timer_read(), - .type = KEY_EVENT - }; - encoder_state = (clockwise ^ 1) | (clockwise << 1); - action_exec(encoder_event); - return; -} - -void matrix_scan_kb(void) { - encoder_action_unregister(); - matrix_scan_user(); - return; -} - -bool encoder_update_kb(uint8_t index, bool clockwise) { - encoder_action_register(index, clockwise); - // don't return user actions, because they are in the keymap - // encoder_update_user(index, clockwise); - return true; +#ifdef ENCODER_MAP_ENABLE +const uint16_t PROGMEM encoder_map[][NUM_ENCODERS][NUM_DIRECTIONS] = { + [0] = { ENCODER_CCW_CW(KC_VOLD, KC_VOLU) }, + [1] = { ENCODER_CCW_CW(_______, _______) }, + [2] = { ENCODER_CCW_CW(_______, _______) }, + [3] = { ENCODER_CCW_CW(_______, _______) }, }; #endif diff --git a/keyboards/rate/pistachio_mp/keymaps/via/rules.mk b/keyboards/rate/pistachio_mp/keymaps/via/rules.mk index 036bd6d1c3..f1adcab005 100644 --- a/keyboards/rate/pistachio_mp/keymaps/via/rules.mk +++ b/keyboards/rate/pistachio_mp/keymaps/via/rules.mk @@ -1 +1,2 @@ -VIA_ENABLE = yes
\ No newline at end of file +VIA_ENABLE = yes +ENCODER_MAP_ENABLE = yes diff --git a/keyboards/rate/pistachio_pro/keymaps/default/keymap.c b/keyboards/rate/pistachio_pro/keymaps/default/keymap.c index 5a543ef11c..a757bcce32 100644 --- a/keyboards/rate/pistachio_pro/keymaps/default/keymap.c +++ b/keyboards/rate/pistachio_pro/keymaps/default/keymap.c @@ -91,20 +91,6 @@ bool oled_task_user(void) { return false; } -/* Encoder */ -bool encoder_update_user(uint8_t index, bool clockwise) { - if (index == 0) { - // Volume control - if (clockwise) { - tap_code(KC_VOLU); - } else { - tap_code(KC_VOLD); - } - } - - return true; -} - /* Keyboard */ void keyboard_post_init_user(void) { bme280_init(); diff --git a/keyboards/rate/pistachio_pro/keymaps/via/keymap.c b/keyboards/rate/pistachio_pro/keymaps/via/keymap.c index b5b8e3c440..30156f0898 100644 --- a/keyboards/rate/pistachio_pro/keymaps/via/keymap.c +++ b/keyboards/rate/pistachio_pro/keymaps/via/keymap.c @@ -26,54 +26,34 @@ enum layer_names { _RESERVE_1 }; -static uint8_t encoder_state = 0; -static const keypos_t ENC_CW = {.row = 0, .col = 14 }; -static const keypos_t ENC_CCW = {.row = 0, .col = 15 }; - -#define LAYOUT_via( \ - k000, k001, k002, k003, k004, k005, k006, k007, k008, k009, k010, k011, k012, ENC_CW, ENC_CCW, k013, \ - k100, k101, k102, k103, k104, k105, k106, k107, k108, k109, k110, k111, k112, k113, k114, k115, k116, k117, \ - k200, k201, k202, k203, k204, k205, k206, k207, k208, k209, k210, k211, k212, k213, k214, k215, \ - k300, k301, k302, k303, k304, k305, k306, k307, k308, k309, k310, k311, k312, k313, \ - k400, k401, k402, k403, k404, k405, k406, k407, k408, k409, k410, k411, k412, k413, \ - k500, k501, k502, k503, k504, k505, k506, k507, k508, k509, k510, k511, k512, k513 ) { \ - { k000, k001, k002, k003, k004, k005, k006, k007, k008, k009, k010, k011, k012, k013, ENC_CW, ENC_CCW, KC_NO, KC_NO }, \ - { k100, k101, k102, k103, k104, k105, k106, k107, k108, k109, k110, k111, k112, k113, k114, k115, k116, k117 }, \ - { k200, k201, k202, k203, k204, k205, k206, k207, k208, k209, k210, k211, k212, k213, k214, k215, KC_NO, KC_NO }, \ - { k300, k301, k302, k303, k304, k305, k306, k307, k308, k309, k310, k311, k312, k313, KC_NO, KC_NO, KC_NO, KC_NO }, \ - { k400, k401, k402, k403, k404, k405, k406, k407, k408, k409, k410, k411, k412, k413, KC_NO, KC_NO, KC_NO, KC_NO }, \ - { k500, k501, k502, k503, k504, k505, k506, k507, k508, k509, k510, k511, k512, k513, KC_NO, KC_NO, KC_NO, KC_NO } \ -} - - const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { /* Base */ - [_BASE] = LAYOUT_via( - KC_ESC, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_VOLU,KC_VOLD,KC_MPLY, + [_BASE] = LAYOUT( + KC_ESC, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_MPLY, JP_ZKHK, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, JP_MINS, JP_CIRC, JP_YEN, KC_BSPC, KC_INS, KC_HOME, KC_PGUP, KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, JP_AT, JP_LBRC, KC_DEL, KC_END, KC_PGDN, JP_EISU, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, JP_SCLN, JP_COLN, JP_RBRC, KC_ENT, KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, JP_COMM, JP_DOT, JP_SLSH, JP_BSLS, KC_RSFT, KC_UP, KC_LCTL, KC_LGUI, KC_LALT, JP_MHEN, KC_SPC, KC_SPC, LT(_FN, JP_HENK), JP_KANA, KC_RALT, KC_APP, KC_RCTL, KC_LEFT, KC_DOWN, KC_RGHT ), - [_FN] = LAYOUT_via( - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_VOLU,KC_VOLD,KC_MPLY, + [_FN] = LAYOUT( + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_MPLY, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_7, KC_8, KC_9, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_4, KC_5, KC_6, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_1, KC_2, KC_3, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_0, JP_DOT, JP_DOT, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS ), - [_RESERVE_0] = LAYOUT_via( - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_VOLU,KC_VOLD,KC_MPLY, + [_RESERVE_0] = LAYOUT( + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_MPLY, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS ), - [_RESERVE_1] = LAYOUT_via( - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_VOLU,KC_VOLD,KC_MPLY, + [_RESERVE_1] = LAYOUT( + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_MPLY, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, @@ -129,40 +109,6 @@ bool oled_task_user(void) { return false; } -/* Encoder */ -void encoder_action_unregister(void) { - if (encoder_state) { - keyevent_t encoder_event = (keyevent_t) { - .key = encoder_state >> 1 ? ENC_CW : ENC_CCW, - .pressed = false, - .time = timer_read(), - .type = KEY_EVENT - }; - encoder_state = 0; - action_exec(encoder_event); - } -} - -void encoder_action_register(uint8_t index, bool clockwise) { - keyevent_t encoder_event = (keyevent_t) { - .key = clockwise ? ENC_CW : ENC_CCW, - .pressed = true, - .time = timer_read(), - .type = KEY_EVENT - }; - encoder_state = (clockwise ^ 1) | (clockwise << 1); - action_exec(encoder_event); -} - -void matrix_scan_user(void) { - encoder_action_unregister(); -} - -bool encoder_update_user(uint8_t index, bool clockwise) { - encoder_action_register(index, clockwise); - return false; -} - /* Keyboard */ void keyboard_post_init_user(void) { bme280_init(); @@ -179,3 +125,12 @@ bool process_record_user(uint16_t keycode, keyrecord_t *record) { return true; } + +#ifdef ENCODER_MAP_ENABLE +const uint16_t PROGMEM encoder_map[][NUM_ENCODERS][NUM_DIRECTIONS] = { + [0] = { ENCODER_CCW_CW(KC_VOLD, KC_VOLU) }, + [1] = { ENCODER_CCW_CW(_______, _______) }, + [2] = { ENCODER_CCW_CW(_______, _______) }, + [3] = { ENCODER_CCW_CW(_______, _______) }, +}; +#endif diff --git a/keyboards/rate/pistachio_pro/keymaps/via/rules.mk b/keyboards/rate/pistachio_pro/keymaps/via/rules.mk index 36b7ba9cbc..1189f4ad19 100644 --- a/keyboards/rate/pistachio_pro/keymaps/via/rules.mk +++ b/keyboards/rate/pistachio_pro/keymaps/via/rules.mk @@ -1,2 +1,3 @@ VIA_ENABLE = yes LTO_ENABLE = yes +ENCODER_MAP_ENABLE = yes diff --git a/keyboards/rationalist/ratio65_hotswap/rev_a/config.h b/keyboards/rationalist/ratio65_hotswap/rev_a/config.h index 17ec1a2bab..27246c865e 100644 --- a/keyboards/rationalist/ratio65_hotswap/rev_a/config.h +++ b/keyboards/rationalist/ratio65_hotswap/rev_a/config.h @@ -16,11 +16,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. */ #pragma once -#define RGBLED_NUM 18 - -#define RGBLIGHT_HUE_STEP 8 -#define RGBLIGHT_SAT_STEP 8 -#define RGBLIGHT_VAL_STEP 8 #define RGBLIGHT_EFFECT_BREATHING #define RGBLIGHT_EFFECT_RAINBOW_MOOD #define RGBLIGHT_EFFECT_RAINBOW_SWIRL diff --git a/keyboards/rationalist/ratio65_hotswap/rev_a/info.json b/keyboards/rationalist/ratio65_hotswap/rev_a/info.json index c9fb81dad8..78d2f9fe45 100644 --- a/keyboards/rationalist/ratio65_hotswap/rev_a/info.json +++ b/keyboards/rationalist/ratio65_hotswap/rev_a/info.json @@ -8,6 +8,11 @@ "pid": "0x0001", "device_version": "0.0.1" }, + "rgblight": { + "saturation_steps": 8, + "brightness_steps": 8, + "led_count": 18 + }, "ws2812": { "pin": "D3" }, diff --git a/keyboards/rationalist/ratio65_solder/rev_a/config.h b/keyboards/rationalist/ratio65_solder/rev_a/config.h index c3f781ab7c..c58b9bd78a 100644 --- a/keyboards/rationalist/ratio65_solder/rev_a/config.h +++ b/keyboards/rationalist/ratio65_solder/rev_a/config.h @@ -16,11 +16,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. */ #pragma once -#define RGBLED_NUM 18 - -#define RGBLIGHT_HUE_STEP 8 -#define RGBLIGHT_SAT_STEP 8 -#define RGBLIGHT_VAL_STEP 8 #define RGBLIGHT_EFFECT_BREATHING #define RGBLIGHT_EFFECT_RAINBOW_MOOD #define RGBLIGHT_EFFECT_RAINBOW_SWIRL diff --git a/keyboards/rationalist/ratio65_solder/rev_a/info.json b/keyboards/rationalist/ratio65_solder/rev_a/info.json index a35fb50972..4d44cd0304 100644 --- a/keyboards/rationalist/ratio65_solder/rev_a/info.json +++ b/keyboards/rationalist/ratio65_solder/rev_a/info.json @@ -8,6 +8,11 @@ "pid": "0x0002", "device_version": "0.0.1" }, + "rgblight": { + "saturation_steps": 8, + "brightness_steps": 8, + "led_count": 18 + }, "ws2812": { "pin": "D3" }, diff --git a/keyboards/recompile_keys/mio/config.h b/keyboards/recompile_keys/mio/config.h index 2a9f3d4187..3dae0066a3 100644 --- a/keyboards/recompile_keys/mio/config.h +++ b/keyboards/recompile_keys/mio/config.h @@ -17,11 +17,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #pragma once -# define RGBLED_NUM 8 -# define RGBLIGHT_HUE_STEP 8 -# define RGBLIGHT_SAT_STEP 8 -# define RGBLIGHT_VAL_STEP 8 -# define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */ # define RGBLIGHT_EFFECT_BREATHING # define RGBLIGHT_EFFECT_RAINBOW_MOOD # define RGBLIGHT_EFFECT_RAINBOW_SWIRL diff --git a/keyboards/recompile_keys/mio/info.json b/keyboards/recompile_keys/mio/info.json index 450cf1c3b0..fa801b4c11 100644 --- a/keyboards/recompile_keys/mio/info.json +++ b/keyboards/recompile_keys/mio/info.json @@ -8,6 +8,12 @@ "pid": "0x4D41", "device_version": "0.0.1" }, + "rgblight": { + "saturation_steps": 8, + "brightness_steps": 8, + "led_count": 8, + "sleep": true + }, "ws2812": { "pin": "B3" }, diff --git a/keyboards/rect44/config.h b/keyboards/rect44/config.h index 6fb0d430fb..4697a6ecd9 100644 --- a/keyboards/rect44/config.h +++ b/keyboards/rect44/config.h @@ -16,7 +16,6 @@ #pragma once -#define RGBLED_NUM 12 # define RGBLIGHT_EFFECT_BREATHING # define RGBLIGHT_EFFECT_RAINBOW_MOOD # define RGBLIGHT_EFFECT_RAINBOW_SWIRL diff --git a/keyboards/rect44/info.json b/keyboards/rect44/info.json index bf985f6202..efa82165ac 100644 --- a/keyboards/rect44/info.json +++ b/keyboards/rect44/info.json @@ -8,6 +8,9 @@ "pid": "0x4DD7", "device_version": "0.0.1" }, + "rgblight": { + "led_count": 12 + }, "ws2812": { "pin": "B6" }, diff --git a/keyboards/redox/rev1/config.h b/keyboards/redox/rev1/config.h index 5b44f7541f..fdda27552d 100644 --- a/keyboards/redox/rev1/config.h +++ b/keyboards/redox/rev1/config.h @@ -22,10 +22,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. /* Locking resynchronize hack */ #define LOCKING_RESYNC_ENABLE -#define RGBLED_NUM 14 // Number of LEDs - -#define RGBLIGHT_SPLIT // sync LEDs between RIGHT and LEFT hand - /* * Feature disable options * These options are also useful to firmware size reduction. diff --git a/keyboards/redox/rev1/info.json b/keyboards/redox/rev1/info.json index 908404466a..c0c5ce6e1a 100644 --- a/keyboards/redox/rev1/info.json +++ b/keyboards/redox/rev1/info.json @@ -8,6 +8,10 @@ "pid": "0x5244", "device_version": "1.0.0" }, + "rgblight": { + "led_count": 14, + "split": true + }, "layouts": { "LAYOUT": { "layout": [ diff --git a/keyboards/retro_75/config.h b/keyboards/retro_75/config.h index a5d547936b..3091e91126 100644 --- a/keyboards/retro_75/config.h +++ b/keyboards/retro_75/config.h @@ -17,11 +17,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #pragma once -#define RGBLED_NUM 18 -// #define RGBLIGHT_HUE_STEP 8 -// #define RGBLIGHT_SAT_STEP 8 -// #define RGBLIGHT_VAL_STEP 8 -// #define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */ #define RGBLIGHT_EFFECT_BREATHING #define RGBLIGHT_EFFECT_RAINBOW_MOOD #define RGBLIGHT_EFFECT_RAINBOW_SWIRL diff --git a/keyboards/retro_75/info.json b/keyboards/retro_75/info.json index 1b15ca5e80..f9ec25d671 100644 --- a/keyboards/retro_75/info.json +++ b/keyboards/retro_75/info.json @@ -8,6 +8,9 @@ "pid": "0x5275", "device_version": "0.0.1" }, + "rgblight": { + "led_count": 18 + }, "ws2812": { "pin": "A9" }, diff --git a/keyboards/reversestudio/decadepad/config.h b/keyboards/reversestudio/decadepad/config.h index a730f35d8c..7eaf08234a 100644 --- a/keyboards/reversestudio/decadepad/config.h +++ b/keyboards/reversestudio/decadepad/config.h @@ -33,10 +33,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #define RGBLIGHT_EFFECT_RGB_TEST #define RGBLIGHT_EFFECT_ALTERNATING #define RGBLIGHT_EFFECT_TWINKLE - #define RGBLED_NUM 20 - #define RGBLIGHT_HUE_STEP 8 - #define RGBLIGHT_SAT_STEP 8 - #define RGBLIGHT_VAL_STEP 8 /* * Feature disable options diff --git a/keyboards/reversestudio/decadepad/info.json b/keyboards/reversestudio/decadepad/info.json index 3b56eb8c53..6ab28acbba 100644 --- a/keyboards/reversestudio/decadepad/info.json +++ b/keyboards/reversestudio/decadepad/info.json @@ -8,6 +8,11 @@ "pid": "0x4450", "device_version": "0.0.1" }, + "rgblight": { + "saturation_steps": 8, + "brightness_steps": 8, + "led_count": 20 + }, "ws2812": { "pin": "D5" }, diff --git a/keyboards/reviung/reviung33/config.h b/keyboards/reviung/reviung33/config.h index 269d01a9ee..f3f04b11f1 100644 --- a/keyboards/reviung/reviung33/config.h +++ b/keyboards/reviung/reviung33/config.h @@ -17,11 +17,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #pragma once -# define RGBLED_NUM 5 -# define RGBLIGHT_HUE_STEP 16 -# define RGBLIGHT_SAT_STEP 16 -# define RGBLIGHT_VAL_STEP 16 -# define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */ #define RGBLIGHT_EFFECT_BREATHING #define RGBLIGHT_EFFECT_RAINBOW_MOOD #define RGBLIGHT_EFFECT_RAINBOW_SWIRL diff --git a/keyboards/reviung/reviung33/info.json b/keyboards/reviung/reviung33/info.json index d5dfa7061a..86ebb7e08e 100644 --- a/keyboards/reviung/reviung33/info.json +++ b/keyboards/reviung/reviung33/info.json @@ -8,6 +8,13 @@ "pid": "0x516D", "device_version": "0.0.1" }, + "rgblight": { + "hue_steps": 16, + "saturation_steps": 16, + "brightness_steps": 16, + "led_count": 5, + "sleep": true + }, "ws2812": { "pin": "D3" }, diff --git a/keyboards/reviung/reviung41/config.h b/keyboards/reviung/reviung41/config.h index 0269cf131b..f3f04b11f1 100644 --- a/keyboards/reviung/reviung41/config.h +++ b/keyboards/reviung/reviung41/config.h @@ -17,11 +17,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #pragma once - #define RGBLED_NUM 11 - #define RGBLIGHT_HUE_STEP 16 - #define RGBLIGHT_SAT_STEP 16 - #define RGBLIGHT_VAL_STEP 16 - #define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */ #define RGBLIGHT_EFFECT_BREATHING #define RGBLIGHT_EFFECT_RAINBOW_MOOD #define RGBLIGHT_EFFECT_RAINBOW_SWIRL diff --git a/keyboards/reviung/reviung41/info.json b/keyboards/reviung/reviung41/info.json index 6344a3e53e..4a67a93385 100644 --- a/keyboards/reviung/reviung41/info.json +++ b/keyboards/reviung/reviung41/info.json @@ -8,6 +8,13 @@ "pid": "0xDCCB", "device_version": "0.0.1" }, + "rgblight": { + "hue_steps": 16, + "saturation_steps": 16, + "brightness_steps": 16, + "led_count": 11, + "sleep": true + }, "ws2812": { "pin": "D3" }, diff --git a/keyboards/reviung/reviung41/keymaps/ciutadellla/keymap.c b/keyboards/reviung/reviung41/keymaps/ciutadellla/keymap.c index 98dda7fe19..a4279821cc 100644 --- a/keyboards/reviung/reviung41/keymaps/ciutadellla/keymap.c +++ b/keyboards/reviung/reviung41/keymaps/ciutadellla/keymap.c @@ -265,7 +265,7 @@ * +-------------/ \--------------+ */ - [_ADJUST] = LAYOUT_reviung41(X(GRINNING_FACE), X(GRINNING_FACE_WITH_SWEAT), X(ROLLING_LAUGHING), X(WINKING_FACE), X(SMILING_FACE_HALO), X(SMILING_FACE_HEARTS), RGB_VAI, RGB_HUI, RGB_MOD, KC_BRIU, KC_MPLY, KC_VOLU, X(SMILING_FACE_HEART_EYES), X(FACE_BLOWING_KISS), X(FACE_ROLLING_EYES), X(PENSIVE_FACE), X(LOUDLY_CRYING_FACE), X(PILE_POO), RGB_VAD, RGB_HUD, RGB_RMOD, KC_BRID, KC_MSTP, KC_VOLD, X(THUMBSUP), X(THUMBSDOWN), X(CLAPPING_HANDS), X(EYES), X(MAN_FACEPALMING), X(GHOST), RGB_TOG, RGB_SAD, RGB_SAI, RGB_SPD, RGB_SPI, KC_MUTE, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS) + [_ADJUST] = LAYOUT_reviung41(UM(GRINNING_FACE), UM(GRINNING_FACE_WITH_SWEAT), UM(ROLLING_LAUGHING), UM(WINKING_FACE), UM(SMILING_FACE_HALO), UM(SMILING_FACE_HEARTS), RGB_VAI, RGB_HUI, RGB_MOD, KC_BRIU, KC_MPLY, KC_VOLU, UM(SMILING_FACE_HEART_EYES), UM(FACE_BLOWING_KISS), UM(FACE_ROLLING_EYES), UM(PENSIVE_FACE), UM(LOUDLY_CRYING_FACE), UM(PILE_POO), RGB_VAD, RGB_HUD, RGB_RMOD, KC_BRID, KC_MSTP, KC_VOLD, UM(THUMBSUP), UM(THUMBSDOWN), UM(CLAPPING_HANDS), UM(EYES), UM(MAN_FACEPALMING), UM(GHOST), RGB_TOG, RGB_SAD, RGB_SAI, RGB_SPD, RGB_SPI, KC_MUTE, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS) }; diff --git a/keyboards/reviung/reviung5/config.h b/keyboards/reviung/reviung5/config.h index d955973b25..4a105e56c1 100644 --- a/keyboards/reviung/reviung5/config.h +++ b/keyboards/reviung/reviung5/config.h @@ -17,11 +17,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #pragma once -# define RGBLED_NUM 4 -# define RGBLIGHT_HUE_STEP 16 -# define RGBLIGHT_SAT_STEP 16 -# define RGBLIGHT_VAL_STEP 16 -# define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */ #define RGBLIGHT_EFFECT_BREATHING #define RGBLIGHT_EFFECT_RAINBOW_MOOD #define RGBLIGHT_EFFECT_RAINBOW_SWIRL diff --git a/keyboards/reviung/reviung5/info.json b/keyboards/reviung/reviung5/info.json index 59ca122b11..d1c6c7caa5 100644 --- a/keyboards/reviung/reviung5/info.json +++ b/keyboards/reviung/reviung5/info.json @@ -8,6 +8,13 @@ "pid": "0x4F0D", "device_version": "0.0.1" }, + "rgblight": { + "hue_steps": 16, + "saturation_steps": 16, + "brightness_steps": 16, + "led_count": 4, + "sleep": true + }, "ws2812": { "pin": "D3" }, diff --git a/keyboards/reviung/reviung53/config.h b/keyboards/reviung/reviung53/config.h index 5d55e83d35..79ac2a59cc 100644 --- a/keyboards/reviung/reviung53/config.h +++ b/keyboards/reviung/reviung53/config.h @@ -3,11 +3,6 @@ #pragma once -#define RGBLED_NUM 10 -#define RGBLIGHT_HUE_STEP 16 -#define RGBLIGHT_SAT_STEP 16 -#define RGBLIGHT_VAL_STEP 16 -#define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */ #define RGBLIGHT_EFFECT_BREATHING #define RGBLIGHT_EFFECT_RAINBOW_MOOD #define RGBLIGHT_EFFECT_RAINBOW_SWIRL diff --git a/keyboards/reviung/reviung53/info.json b/keyboards/reviung/reviung53/info.json index d79d31ae9e..0742f9c221 100644 --- a/keyboards/reviung/reviung53/info.json +++ b/keyboards/reviung/reviung53/info.json @@ -8,6 +8,13 @@ "pid": "0x4E09", "device_version": "0.0.1" }, + "rgblight": { + "hue_steps": 16, + "saturation_steps": 16, + "brightness_steps": 16, + "led_count": 10, + "sleep": true + }, "ws2812": { "pin": "D3" }, diff --git a/keyboards/rgbkb/mun/config.h b/keyboards/rgbkb/mun/config.h index 5b411a8c52..55a1c7367c 100644 --- a/keyboards/rgbkb/mun/config.h +++ b/keyboards/rgbkb/mun/config.h @@ -9,8 +9,6 @@ #pragma once -#define MATRIX_IO_DELAY 5 - #define BUSY_WAIT #define BUSY_WAIT_INSTRUCTIONS 35 // Increase if two rows are pressed at the same time. #define GPIO_INPUT_PIN_DELAY 10 @@ -49,8 +47,6 @@ #define SPLIT_TRANSACTION_IDS_KB TOUCH_ENCODER_SYNC, RGB_MENU_SYNC /* RGB LED Configuration */ -#define RGBLED_NUM 98 -#define RGBLED_SPLIT { 49, 49 } #define RGBLIGHT_EFFECT_BREATHING #define RGBLIGHT_EFFECT_RAINBOW_MOOD #define RGBLIGHT_EFFECT_RAINBOW_SWIRL @@ -135,7 +131,6 @@ #define TOUCH_UPDATE_INTERVAL 33 #define OLED_UPDATE_INTERVAL 33 -#define TAP_CODE_DELAY 5 #define WEAR_LEVELING_BACKING_SIZE 4096 #define WEAR_LEVELING_LOGICAL_SIZE 2048 diff --git a/keyboards/rgbkb/mun/keymaps/default/keymap.c b/keyboards/rgbkb/mun/keymaps/default/keymap.c index a1b9dcfe46..aa8ba1eba0 100644 --- a/keyboards/rgbkb/mun/keymaps/default/keymap.c +++ b/keyboards/rgbkb/mun/keymaps/default/keymap.c @@ -66,9 +66,6 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { * |--------+--------+--------+--------+--------+--------+--------| |--------+--------+--------+--------+--------+--------+--------| * | Ctrl | Win | Alt | RGBTOG | Adjust | Space | Bksp | | Enter | Space | Left | Down | Up | Right | Ctrl | * '--------+--------+--------+--------+--------+--------+--------' '--------+--------+--------+--------+--------+--------+--------' - * Encoder 1 Encoder 2 Encoder 3 Encoder 4 - * .-----------------------------------. .-----------------------------------. - * | VolUp | VolDn | VolUp | VolDn | | PgUp | PgDn | PgUp | PgDn | * |--------+--------+--------+--------+--------. .--------+--------+--------+--------+--------| * | VolDn | VolUp | Next | Play | Prev | Touch Encoder Touch Encoder | RgbHuI | RgbHuD | RgbMdD | RgbTog | RgbMdI | * '--------+--------+--------+--------+--------' '--------+--------+--------+--------+--------' @@ -80,7 +77,6 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_LCBR, KC_RCBR, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, SC_SENT, KC_LCTL, KC_LGUI, KC_LALT, RGB_TOG, ADJUST, KC_SPC, KC_DEL, KC_ENT, KC_SPC, KC_LEFT, KC_DOWN, KC_UP, KC_RIGHT,KC_RCTL, - KC_VOLU, KC_VOLD, KC_VOLU, KC_VOLD, KC_PGDN, KC_PGUP, KC_PGDN, KC_PGUP, KC_VOLD, KC_VOLU, KC_MNXT, KC_MPLY, KC_MPRV, RGB_HUI, RGB_HUD, RGB_RMOD,RGB_TOG, RGB_MOD ), @@ -91,7 +87,6 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { _______, KC_Z, KC_X, KC_C, KC_V, KC_B, _______, _______, KC_K, KC_M, KC_COMM, KC_DOT, KC_SLSH, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, - _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______ ), @@ -102,7 +97,6 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { _______, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_F4, KC_F8, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, _______, _______, KC_NO, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, - _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______ ), @@ -113,7 +107,6 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, TCH_TOG, _______, _______, _______, _______, _______, KC_MPLY, KC_MNXT, KC_MUTE, KC_VOLD, KC_VOLU, - _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______ ), @@ -124,7 +117,6 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { _______, RGB_SPD, _______, RGB_SPI, _______, _______, _______, _______, _______, KC_P1, KC_P2, KC_P3, _______, GAME, _______, RGB_RMOD,_______, RGB_MOD, _______, _______, _______, _______, _______, KC_P0, KC_PDOT, KC_NUM, QWERTY, COLEMAK, - _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______ ), @@ -135,7 +127,6 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, - _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______ ), @@ -146,7 +137,6 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, - _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______ ), @@ -157,7 +147,6 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, - _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______ ), }; @@ -251,3 +240,10 @@ bool oled_task_user(void) { oled_rotation_t oled_init_user(oled_rotation_t rotation) { return OLED_ROTATION_270; } + +#ifdef ENCODER_MAP_ENABLE +const uint16_t PROGMEM encoder_map[][NUM_ENCODERS][NUM_DIRECTIONS] = { + [0] = { ENCODER_CCW_CW(KC_VOLD, KC_VOLU), ENCODER_CCW_CW(KC_VOLD, KC_VOLU), ENCODER_CCW_CW(KC_PGUP, KC_PGDN), ENCODER_CCW_CW(KC_PGUP, KC_PGDN) }, + [1 ... 7] = { ENCODER_CCW_CW(_______, _______), ENCODER_CCW_CW(_______, _______), ENCODER_CCW_CW(_______, _______), ENCODER_CCW_CW(_______, _______) } +}; +#endif diff --git a/keyboards/rgbkb/mun/keymaps/default/rules.mk b/keyboards/rgbkb/mun/keymaps/default/rules.mk new file mode 100644 index 0000000000..ee32568148 --- /dev/null +++ b/keyboards/rgbkb/mun/keymaps/default/rules.mk @@ -0,0 +1 @@ +ENCODER_MAP_ENABLE = yes diff --git a/keyboards/rgbkb/mun/keymaps/peott-fr/keymap.c b/keyboards/rgbkb/mun/keymaps/peott-fr/keymap.c index 8767edbb57..4d62b95b96 100644 --- a/keyboards/rgbkb/mun/keymaps/peott-fr/keymap.c +++ b/keyboards/rgbkb/mun/keymaps/peott-fr/keymap.c @@ -42,40 +42,49 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { * '--------+--------+--------+--------+--------' '--------+--------+--------+--------+--------' */ [_BASE] = LAYOUT( - KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_GRV, KC_EQL, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, - KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_LBRC, KC_RBRC, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_BSLS, + KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_GRV, KC_EQL, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_LBRC, KC_RBRC, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_BSLS, KC_LCTL, KC_A, KC_S, KC_D, KC_F, KC_G, KC_HOME, KC_END, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, - SC_LSPO, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_MPLY, KC_MUTE, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, SC_RSPC, - KC_LCTL, KC_LGUI, KC_LALT, MO(3), DEL_FUNC, SPC_LHND, SPC_LHND, BSP_FUNC, BSP_FUNC, KC_LEFT, KC_DOWN, KC_UP, KC_RGHT, KC_RCTL, + SC_LSPO, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_MPLY, KC_MUTE, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, SC_RSPC, + KC_LCTL, KC_LGUI, KC_LALT, MO(3), DEL_FUNC, SPC_LHND, SPC_LHND, BSP_FUNC, BSP_FUNC, KC_LEFT, KC_DOWN, KC_UP, KC_RGHT, KC_RCTL, // Here we have the encoder setup. Encoder 0 clockwise, Encoder 0 counter-clockwise, Encoder 1 clockwise, Encoder 1 counter-clockwise , then right side - KC_VOLU, KC_VOLD, KC_VOLU, KC_VOLD, KC_PGDN, KC_PGUP, KC_PGDN, KC_PGUP, KC_VOLD, KC_VOLU, KC_MNXT, KC_MPLY, KC_MPRV, RGB_HUI, RGB_HUD, RGB_RMOD, RGB_TOG, RGB_MOD + KC_VOLD, KC_VOLU, KC_MNXT, KC_MPLY, KC_MPRV, RGB_HUI, RGB_HUD, RGB_RMOD, RGB_TOG, RGB_MOD ), [_LHAND] = LAYOUT( - QK_BOOT, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F11, KC_F12, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_TRNS, - KC_TRNS, KC_TRNS, KC_TRNS, KC_UP, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_PSCR, KC_SCRL, KC_PAUS, KC_TRNS, + QK_BOOT, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F11, KC_F12, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_UP, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_PSCR, KC_SCRL, KC_PAUS, KC_TRNS, KC_TRNS, KC_TRNS, KC_LEFT, KC_DOWN, KC_RGHT, KC_TRNS, KC_PGUP, KC_PGDN, KC_TRNS, KC_TRNS, KC_INS, KC_HOME, KC_PGUP, KC_TRNS, - KC_LSFT, KC_CALC, KC_MYCM, KC_TRNS, KC_ENT, KC_BSPC, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_DEL, KC_END, KC_PGDN, KC_RSFT, + KC_LSFT, KC_CALC, KC_MYCM, KC_TRNS, KC_ENT, KC_BSPC, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_DEL, KC_END, KC_PGDN, KC_RSFT, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_HOME, KC_PGDN, KC_PGUP, KC_END, KC_TRNS, // Encoders. - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS ), [_FUNC] = LAYOUT( - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, RGB_TOG, RGB_MOD, RGB_HUI, RGB_SAI, RGB_VAI, RGB_SPI, QK_BOOT, - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, RGB_TOG, RGB_MOD, RGB_HUI, RGB_SAI, RGB_VAI, RGB_SPI, QK_BOOT, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, // Encoders. - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS ), // Placeholder layer! [3] = LAYOUT( - KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, - KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, - KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, - KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, - KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, + KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, + KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, + KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, + KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, + KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, // Encoders. - KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO + KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO ) -};
\ No newline at end of file +}; + +#ifdef ENCODER_MAP_ENABLE +const uint16_t PROGMEM encoder_map[][NUM_ENCODERS][NUM_DIRECTIONS] = { + [0] = { ENCODER_CCW_CW(KC_VOLD, KC_VOLU), ENCODER_CCW_CW(KC_VOLD, KC_VOLU), ENCODER_CCW_CW(KC_PGUP, KC_PGDN), ENCODER_CCW_CW(KC_PGUP, KC_PGDN) }, + [1] = { ENCODER_CCW_CW(_______, _______), ENCODER_CCW_CW(_______, _______), ENCODER_CCW_CW(_______, _______), ENCODER_CCW_CW(_______, _______) }, + [2] = { ENCODER_CCW_CW(_______, _______), ENCODER_CCW_CW(_______, _______), ENCODER_CCW_CW(_______, _______), ENCODER_CCW_CW(_______, _______) }, + [3] = { ENCODER_CCW_CW(_______, _______), ENCODER_CCW_CW(_______, _______), ENCODER_CCW_CW(_______, _______), ENCODER_CCW_CW(_______, _______) } +}; +#endif diff --git a/keyboards/rgbkb/mun/keymaps/peott-fr/rules.mk b/keyboards/rgbkb/mun/keymaps/peott-fr/rules.mk new file mode 100644 index 0000000000..ee32568148 --- /dev/null +++ b/keyboards/rgbkb/mun/keymaps/peott-fr/rules.mk @@ -0,0 +1 @@ +ENCODER_MAP_ENABLE = yes diff --git a/keyboards/rgbkb/mun/keymaps/via/keymap.c b/keyboards/rgbkb/mun/keymaps/via/keymap.c index a1b9dcfe46..aa8ba1eba0 100644 --- a/keyboards/rgbkb/mun/keymaps/via/keymap.c +++ b/keyboards/rgbkb/mun/keymaps/via/keymap.c @@ -66,9 +66,6 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { * |--------+--------+--------+--------+--------+--------+--------| |--------+--------+--------+--------+--------+--------+--------| * | Ctrl | Win | Alt | RGBTOG | Adjust | Space | Bksp | | Enter | Space | Left | Down | Up | Right | Ctrl | * '--------+--------+--------+--------+--------+--------+--------' '--------+--------+--------+--------+--------+--------+--------' - * Encoder 1 Encoder 2 Encoder 3 Encoder 4 - * .-----------------------------------. .-----------------------------------. - * | VolUp | VolDn | VolUp | VolDn | | PgUp | PgDn | PgUp | PgDn | * |--------+--------+--------+--------+--------. .--------+--------+--------+--------+--------| * | VolDn | VolUp | Next | Play | Prev | Touch Encoder Touch Encoder | RgbHuI | RgbHuD | RgbMdD | RgbTog | RgbMdI | * '--------+--------+--------+--------+--------' '--------+--------+--------+--------+--------' @@ -80,7 +77,6 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_LCBR, KC_RCBR, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, SC_SENT, KC_LCTL, KC_LGUI, KC_LALT, RGB_TOG, ADJUST, KC_SPC, KC_DEL, KC_ENT, KC_SPC, KC_LEFT, KC_DOWN, KC_UP, KC_RIGHT,KC_RCTL, - KC_VOLU, KC_VOLD, KC_VOLU, KC_VOLD, KC_PGDN, KC_PGUP, KC_PGDN, KC_PGUP, KC_VOLD, KC_VOLU, KC_MNXT, KC_MPLY, KC_MPRV, RGB_HUI, RGB_HUD, RGB_RMOD,RGB_TOG, RGB_MOD ), @@ -91,7 +87,6 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { _______, KC_Z, KC_X, KC_C, KC_V, KC_B, _______, _______, KC_K, KC_M, KC_COMM, KC_DOT, KC_SLSH, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, - _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______ ), @@ -102,7 +97,6 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { _______, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_F4, KC_F8, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, _______, _______, KC_NO, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, - _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______ ), @@ -113,7 +107,6 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, TCH_TOG, _______, _______, _______, _______, _______, KC_MPLY, KC_MNXT, KC_MUTE, KC_VOLD, KC_VOLU, - _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______ ), @@ -124,7 +117,6 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { _______, RGB_SPD, _______, RGB_SPI, _______, _______, _______, _______, _______, KC_P1, KC_P2, KC_P3, _______, GAME, _______, RGB_RMOD,_______, RGB_MOD, _______, _______, _______, _______, _______, KC_P0, KC_PDOT, KC_NUM, QWERTY, COLEMAK, - _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______ ), @@ -135,7 +127,6 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, - _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______ ), @@ -146,7 +137,6 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, - _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______ ), @@ -157,7 +147,6 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, - _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______ ), }; @@ -251,3 +240,10 @@ bool oled_task_user(void) { oled_rotation_t oled_init_user(oled_rotation_t rotation) { return OLED_ROTATION_270; } + +#ifdef ENCODER_MAP_ENABLE +const uint16_t PROGMEM encoder_map[][NUM_ENCODERS][NUM_DIRECTIONS] = { + [0] = { ENCODER_CCW_CW(KC_VOLD, KC_VOLU), ENCODER_CCW_CW(KC_VOLD, KC_VOLU), ENCODER_CCW_CW(KC_PGUP, KC_PGDN), ENCODER_CCW_CW(KC_PGUP, KC_PGDN) }, + [1 ... 7] = { ENCODER_CCW_CW(_______, _______), ENCODER_CCW_CW(_______, _______), ENCODER_CCW_CW(_______, _______), ENCODER_CCW_CW(_______, _______) } +}; +#endif diff --git a/keyboards/rgbkb/mun/keymaps/via/rules.mk b/keyboards/rgbkb/mun/keymaps/via/rules.mk index 40bded3991..74b4513b04 100644 --- a/keyboards/rgbkb/mun/keymaps/via/rules.mk +++ b/keyboards/rgbkb/mun/keymaps/via/rules.mk @@ -1 +1,2 @@ -VIA_ENABLE=yes
\ No newline at end of file +VIA_ENABLE=yes +ENCODER_MAP_ENABLE = yes diff --git a/keyboards/rgbkb/mun/keymaps/xulkal2/keymap.c b/keyboards/rgbkb/mun/keymaps/xulkal2/keymap.c index 960cc9266d..eefb59e676 100644 --- a/keyboards/rgbkb/mun/keymaps/xulkal2/keymap.c +++ b/keyboards/rgbkb/mun/keymaps/xulkal2/keymap.c @@ -46,9 +46,6 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { * |--------+--------+--------+--------+--------+--------+--------| |--------+--------+--------+--------+--------+--------+--------| * | Ctrl- | Win | Alt | Del | Space | | ADJ | | FN | | Space | '" | Alt | App | Ctrl= | * '--------+--------+--------+--------|--------+--------+--------' '--------+--------+--------+--------+--------+--------+--------' - * Encoder 1 Encoder 2 Encoder 3 Encoder 4 - * .-----------------------------------. .-----------------------------------. - * | VolUp | VolDn | VolUp | VolDn | | PgUp | PgDn | PgUp | PgDn | * |--------+--------+--------+--------+--------. .--------+--------+--------+--------+--------| * | VolDn | VolUp | Next | Play | Prev | Touch Encoder Touch Encoder | RgbHuI | RgbHuD | RgbMdD | RgbTog | RgbMdI | * '--------+--------+--------+--------+--------' '--------+--------+--------+--------+--------' @@ -60,7 +57,6 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { SC_LSPO, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_LCBR, KC_RCBR, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, SC_RSPC, SC_LCPO, KC_LGUI, KC_LALT, KC_DEL, KC_SPC, KC_NO, ADJ, FN, KC_NO, KC_SPC, KC_QUOTE,KC_RALT, KC_APP, SC_RCPC, - KC_VOLU, KC_VOLD, KC_VOLU, KC_VOLD, MENU_DN, MENU_UP, MENU_DN, MENU_UP, KC_VOLD, KC_VOLU, KC_MNXT, KC_MPLY, KC_MPRV, RGB_HUI, RGB_HUD, RGB_RMOD,RGB_TOG, RGB_MOD ), @@ -76,9 +72,6 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { * |--------+--------+--------+--------+--------+--------+--------| |--------+--------+--------+--------+--------+--------+--------| * | | | | | | | | | | | Play | Prev | Next | VolUp | VolDn | * '--------+--------+--------+--------+--------+--------+--------' '--------+--------+--------+--------+--------+--------+--------' - * Encoder 1 Encoder 2 Encoder 3 Encoder 4 - * .-----------------------------------. .-----------------------------------. - * | | | | | | | | | | * |--------+--------+--------+--------+--------. .--------+--------+--------+--------+--------| * | | | | | | Touch Encoder Touch Encoder | | | | | | * '--------+--------+--------+--------+--------' '--------+--------+--------+--------+--------' @@ -90,7 +83,6 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { _______, RGB_RST, _______, _______, _______, RGB_TOG, _______, _______, _______, _______, KC_DEL, KC_END, KC_PGDN, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_MPLY, KC_MPRV, KC_MNXT, KC_VOLU, KC_VOLD, - _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______ ), @@ -120,7 +112,6 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { _______, _______, _______, _______, _______, EE_CLR, _______, _______, _______, KC_KP_1, KC_KP_2, KC_KP_3, KC_PENT, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_KP_0, KC_PDOT, KC_PENT, _______, - _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______ ) }; @@ -247,3 +238,11 @@ bool oled_task_user(void) { oled_rotation_t oled_init_user(oled_rotation_t rotation) { return OLED_ROTATION_270; } + +#ifdef ENCODER_MAP_ENABLE +const uint16_t PROGMEM encoder_map[][NUM_ENCODERS][NUM_DIRECTIONS] = { + [0] = { ENCODER_CCW_CW(KC_VOLD, KC_VOLU), ENCODER_CCW_CW(KC_VOLD, KC_VOLU), ENCODER_CCW_CW(MENU_DN, MENU_UP), ENCODER_CCW_CW(MENU_DN, MENU_UP) }, + [1] = { ENCODER_CCW_CW(_______, _______), ENCODER_CCW_CW(_______, _______), ENCODER_CCW_CW(_______, _______), ENCODER_CCW_CW(_______, _______) }, + [2] = { ENCODER_CCW_CW(_______, _______), ENCODER_CCW_CW(_______, _______), ENCODER_CCW_CW(_______, _______), ENCODER_CCW_CW(_______, _______) } +}; +#endif diff --git a/keyboards/rgbkb/mun/keymaps/xulkal2/rules.mk b/keyboards/rgbkb/mun/keymaps/xulkal2/rules.mk index a087f669da..e6b71e56d1 100644 --- a/keyboards/rgbkb/mun/keymaps/xulkal2/rules.mk +++ b/keyboards/rgbkb/mun/keymaps/xulkal2/rules.mk @@ -1,3 +1,5 @@ MOUSEKEY_ENABLE = yes # using for mouse wheel up and down, more granular than page up/down -OPT_DEFS += -DRGB_UNLIMITED_POWER
\ No newline at end of file +OPT_DEFS += -DRGB_UNLIMITED_POWER + +ENCODER_MAP_ENABLE = yes diff --git a/keyboards/rgbkb/mun/rev1/info.json b/keyboards/rgbkb/mun/rev1/info.json index 36b1ab0003..e948f27a59 100644 --- a/keyboards/rgbkb/mun/rev1/info.json +++ b/keyboards/rgbkb/mun/rev1/info.json @@ -8,6 +8,10 @@ "pid": "0x3505", "device_version": "0.0.1" }, + "rgblight": { + "led_count": 98, + "split_count": [49, 49] + }, "ws2812": { "pin": "B5", "driver": "pwm" @@ -17,7 +21,8 @@ }, "matrix_pins": { "cols": ["A0", "B11", "B0", "B10", "B12", "B2", "A8"], - "rows": ["A1", "A3", "B3", "A13", "B15", null, null] + "rows": ["A1", "A3", "B3", "A13", "B15", null, null], + "io_delay": 5 }, "diode_direction": "COL2ROW", "encoder": { @@ -26,6 +31,9 @@ {"pin_a": "B9", "pin_b": "A15"} ] }, + "qmk": { + "tap_keycode_delay": 5 + }, "split": { "soft_serial_pin": "A9" }, @@ -114,16 +122,6 @@ {"matrix": [11, 1], "x": 12.5, "y": 4}, {"matrix": [11, 0], "x": 13.5, "y": 4}, - {"matrix": [5, 0], "x": 0, "y": 5.5}, - {"matrix": [5, 1], "x": 1, "y": 5.5}, - {"matrix": [5, 2], "x": 2, "y": 5.5}, - {"matrix": [5, 3], "x": 3, "y": 5.5}, - - {"matrix": [12, 0], "x": 10.5, "y": 5.5}, - {"matrix": [12, 1], "x": 11.5, "y": 5.5}, - {"matrix": [12, 2], "x": 12.5, "y": 5.5}, - {"matrix": [12, 3], "x": 13.5, "y": 5.5}, - {"matrix": [6, 0], "x": 0, "y": 6.5}, {"matrix": [6, 1], "x": 1, "y": 6.5}, {"matrix": [6, 2], "x": 2, "y": 6.5}, diff --git a/keyboards/rgbkb/mun/rev1/rev1.c b/keyboards/rgbkb/mun/rev1/rev1.c index 564ce4dfb9..986916b4a9 100644 --- a/keyboards/rgbkb/mun/rev1/rev1.c +++ b/keyboards/rgbkb/mun/rev1/rev1.c @@ -12,25 +12,12 @@ #define NUMBER_OF_TOUCH_ENCODERS 2 #define TOUCH_ENCODER_OPTIONS TOUCH_SEGMENTS + 2 -#define NUMBER_OF_ENCODERS 4 -#define ENCODER_OPTIONS 2 - typedef struct PACKED { uint8_t r; uint8_t c; } encodermap_t; -// this maps encoders and then touch encoders to their respective electrical matrix entry -// mapping is row (y) then column (x) when looking at the electrical layout -const encodermap_t encoder_map[NUMBER_OF_ENCODERS][ENCODER_OPTIONS] = -{ - { { 5, 0 }, { 5, 1 } }, // Encoder 1 matrix entries - { { 5, 2 }, { 5, 3 } }, // Encoder 2 matrix entries - { { 12, 0 }, { 12, 1 } }, // Encoder 3 matrix entries - { { 12, 2 }, { 12, 3 } }, // Encoder 4 matrix entries -}; - -const encodermap_t touch_encoder_map[NUMBER_OF_TOUCH_ENCODERS][TOUCH_ENCODER_OPTIONS] = +const encodermap_t touch_encoder_map[NUMBER_OF_TOUCH_ENCODERS][TOUCH_ENCODER_OPTIONS] = { { { 6, 0 }, { 6, 1 }, { 6, 2 }, { 6, 3 }, { 6, 4 } }, // Touch Encoder 1 matrix entries { { 13, 0 }, { 13, 1 }, { 13, 2 }, { 13, 3 }, { 13, 4 } } // Touch Encoder 2 matrix entries @@ -44,24 +31,6 @@ static void process_encoder_matrix(encodermap_t pos) { action_exec(MAKE_KEYEVENT(pos.r, pos.c, false)); } -bool encoder_update_kb(uint8_t index, bool clockwise) { - if (!encoder_update_user(index, clockwise)) - return false; - - // Mapping clockwise (typically increase) to zero, and counter clockwise (decrease) to 1 - process_encoder_matrix(encoder_map[index][clockwise ? 0 : 1]); - return false; -} - -bool touch_encoder_update_kb(uint8_t index, bool clockwise) { - if (!touch_encoder_update_user(index, clockwise)) - return false; - - // Mapping clockwise (typically increase) to zero, and counter clockwise (decrease) to 1 - process_encoder_matrix(touch_encoder_map[index][clockwise ? 0 : 1]); - return false; -} - bool touch_encoder_tapped_kb(uint8_t index, uint8_t section) { if (!touch_encoder_tapped_user(index, section)) return false; diff --git a/keyboards/rgbkb/pan/config.h b/keyboards/rgbkb/pan/config.h index b89b6b4f65..242e397db4 100644 --- a/keyboards/rgbkb/pan/config.h +++ b/keyboards/rgbkb/pan/config.h @@ -16,7 +16,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #pragma once -#define RGBLED_NUM 64 #define RGBLIGHT_EFFECT_BREATHING #define RGBLIGHT_EFFECT_RAINBOW_MOOD #define RGBLIGHT_EFFECT_RAINBOW_SWIRL @@ -27,7 +26,7 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #define RGBLIGHT_EFFECT_RGB_TEST #define RGBLIGHT_EFFECT_ALTERNATING #define RGBLIGHT_EFFECT_TWINKLE -#define RGB_MATRIX_LED_COUNT RGBLED_NUM +#define RGB_MATRIX_LED_COUNT 64 // RGB Matrix Animation modes. Explicitly enabled // For full list of effects, see: diff --git a/keyboards/rgbkb/pan/info.json b/keyboards/rgbkb/pan/info.json index 5c3ed6f610..1f408bd713 100644 --- a/keyboards/rgbkb/pan/info.json +++ b/keyboards/rgbkb/pan/info.json @@ -12,6 +12,7 @@ "driver": "custom" }, "rgblight": { + "led_count": 64, "max_brightness": 120 }, "layouts": { diff --git a/keyboards/rgbkb/sol/config.h b/keyboards/rgbkb/sol/config.h index 5c327fd760..a0a2202afa 100644 --- a/keyboards/rgbkb/sol/config.h +++ b/keyboards/rgbkb/sol/config.h @@ -18,9 +18,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #pragma once - -#define TAPPING_TERM 150 - #define EE_HANDS #ifdef IOS_DEVICE_ENABLE diff --git a/keyboards/rgbkb/sol/keymaps/brianweyer/keymap.c b/keyboards/rgbkb/sol/keymaps/brianweyer/keymap.c index c476f4c2df..194ec4de2f 100644 --- a/keyboards/rgbkb/sol/keymaps/brianweyer/keymap.c +++ b/keyboards/rgbkb/sol/keymaps/brianweyer/keymap.c @@ -254,10 +254,10 @@ static void render_status(void) { } // Host Keyboard LED Status - uint8_t led_usb_state = host_keyboard_leds(); - oled_write_P(led_usb_state & (1<<USB_LED_NUM_LOCK) ? PSTR("NUMLOCK ") : PSTR(" "), false); - oled_write_P(led_usb_state & (1<<USB_LED_CAPS_LOCK) ? PSTR("CAPS ") : PSTR(" "), false); - oled_write_P(led_usb_state & (1<<USB_LED_SCROLL_LOCK) ? PSTR("SCLK ") : PSTR(" "), false); + led_t led_state = host_keyboard_led_state(); + oled_write_P(led_state.num_lock ? PSTR("NUMLOCK ") : PSTR(" "), false); + oled_write_P(led_state.caps_lock ? PSTR("CAPS ") : PSTR(" "), false); + oled_write_P(led_state.scroll_lock ? PSTR("SCLK ") : PSTR(" "), false); } bool oled_task_user(void) { diff --git a/keyboards/rgbkb/sol/keymaps/danielhklein/keymap.c b/keyboards/rgbkb/sol/keymaps/danielhklein/keymap.c index 6f222dcd71..24583f0d17 100644 --- a/keyboards/rgbkb/sol/keymaps/danielhklein/keymap.c +++ b/keyboards/rgbkb/sol/keymaps/danielhklein/keymap.c @@ -318,10 +318,10 @@ static void render_status(void) { } // Host Keyboard LED Status - uint8_t led_usb_state = host_keyboard_leds(); - oled_write_P(led_usb_state & (1<<USB_LED_NUM_LOCK) ? PSTR("NUMLOCK ") : PSTR(" "), false); - oled_write_P(led_usb_state & (1<<USB_LED_CAPS_LOCK) ? PSTR("CAPS ") : PSTR(" "), false); - oled_write_P(led_usb_state & (1<<USB_LED_SCROLL_LOCK) ? PSTR("SCLK ") : PSTR(" "), false); + led_t led_state = host_keyboard_led_state(); + oled_write_P(led_state.num_lock ? PSTR("NUMLOCK ") : PSTR(" "), false); + oled_write_P(led_state.caps_lock ? PSTR("CAPS ") : PSTR(" "), false); + oled_write_P(led_state.scroll_lock ? PSTR("SCLK ") : PSTR(" "), false); } bool oled_task_user(void) { diff --git a/keyboards/rgbkb/sol/keymaps/default/keymap.c b/keyboards/rgbkb/sol/keymaps/default/keymap.c index 60e4873275..4a6511cbfc 100644 --- a/keyboards/rgbkb/sol/keymaps/default/keymap.c +++ b/keyboards/rgbkb/sol/keymaps/default/keymap.c @@ -344,11 +344,11 @@ static void render_status(void) { } // Host Keyboard LED Status - uint8_t led_state = host_keyboard_leds(); + led_t led_state = host_keyboard_led_state(); oled_write_P(PSTR("-----"), false); - oled_write_P(IS_LED_ON(led_state, USB_LED_NUM_LOCK) ? PSTR("NUMLK") : PSTR(" "), false); - oled_write_P(IS_LED_ON(led_state, USB_LED_CAPS_LOCK) ? PSTR("CAPLK") : PSTR(" "), false); - oled_write_P(IS_LED_ON(led_state, USB_LED_SCROLL_LOCK) ? PSTR("SCRLK") : PSTR(" "), false); + oled_write_P(led_state.num_lock ? PSTR("NUMLK") : PSTR(" "), false); + oled_write_P(led_state.caps_lock ? PSTR("CAPLK") : PSTR(" "), false); + oled_write_P(led_state.scroll_lock ? PSTR("SCRLK") : PSTR(" "), false); #ifdef RGB_OLED_MENU static char buffer[31] = { 0 }; diff --git a/keyboards/rgbkb/sol/keymaps/xyverz/keymap.c b/keyboards/rgbkb/sol/keymaps/xyverz/keymap.c index a5b62eb1da..0ef9def55d 100644 --- a/keyboards/rgbkb/sol/keymaps/xyverz/keymap.c +++ b/keyboards/rgbkb/sol/keymaps/xyverz/keymap.c @@ -334,11 +334,11 @@ static void render_status(void) { } // Host Keyboard LED Status - uint8_t led_state = host_keyboard_leds(); + led_t led_state = host_keyboard_led_state(); oled_write_P(PSTR("-----"), false); - oled_write_P(IS_LED_ON(led_state, USB_LED_NUM_LOCK) ? PSTR("NUMLK") : PSTR(" "), false); - oled_write_P(IS_LED_ON(led_state, USB_LED_CAPS_LOCK) ? PSTR("CAPLK") : PSTR(" "), false); - oled_write_P(IS_LED_ON(led_state, USB_LED_SCROLL_LOCK) ? PSTR("SCRLK") : PSTR(" "), false); + oled_write_P(led_state.num_lock ? PSTR("NUMLK") : PSTR(" "), false); + oled_write_P(led_state.caps_lock ? PSTR("CAPLK") : PSTR(" "), false); + oled_write_P(led_state.scroll_lock ? PSTR("SCRLK") : PSTR(" "), false); #ifdef RGB_OLED_MENU static char buffer[31] = { 0 }; diff --git a/keyboards/rgbkb/sol/rev1/info.json b/keyboards/rgbkb/sol/rev1/info.json index b0b8fc12d0..ebd23f4e1d 100644 --- a/keyboards/rgbkb/sol/rev1/info.json +++ b/keyboards/rgbkb/sol/rev1/info.json @@ -24,6 +24,9 @@ "split": { "soft_serial_pin": "D3" }, + "tapping": { + "term": 150 + }, "ws2812": { "pin": "B3" }, diff --git a/keyboards/rgbkb/sol/rev2/info.json b/keyboards/rgbkb/sol/rev2/info.json index 1eec8a3930..508ba1ea05 100644 --- a/keyboards/rgbkb/sol/rev2/info.json +++ b/keyboards/rgbkb/sol/rev2/info.json @@ -19,6 +19,9 @@ "split": { "soft_serial_pin": "D3" }, + "tapping": { + "term": 150 + }, "ws2812": { "pin": "B7" }, diff --git a/keyboards/rgbkb/sol3/config.h b/keyboards/rgbkb/sol3/config.h index 1b8fa2314f..9cc01fbf97 100644 --- a/keyboards/rgbkb/sol3/config.h +++ b/keyboards/rgbkb/sol3/config.h @@ -9,8 +9,6 @@ #pragma once -#define MATRIX_IO_DELAY 5 - #define BUSY_WAIT #define BUSY_WAIT_INSTRUCTIONS 35 // Increase if two rows are pressed at the same time. #define GPIO_INPUT_PIN_DELAY 10 @@ -52,10 +50,6 @@ #define DIP_SWITCH_PINS { A14, B13 } #define DIP_SWITCH_PINS_RIGHT { A14, B0 } -/* RGB LED Configuration */ -#define RGBLED_NUM 156 -#define RGBLED_SPLIT { 78, 78 } - // RGB Lighting Animation modes. Explicitly enabled // For full list of effects, see: // https://docs.qmk.fm/#/feature_rgblight?id=effect-and-animation-toggles @@ -137,7 +131,6 @@ #define TOUCH_UPDATE_INTERVAL 33 #define OLED_UPDATE_INTERVAL 33 -#define TAP_CODE_DELAY 5 /* Audio Configuration */ #define AUDIO_PIN A4 diff --git a/keyboards/rgbkb/sol3/keymaps/default/keymap.c b/keyboards/rgbkb/sol3/keymaps/default/keymap.c index 19499ab3c3..dacdf98a40 100644 --- a/keyboards/rgbkb/sol3/keymaps/default/keymap.c +++ b/keyboards/rgbkb/sol3/keymaps/default/keymap.c @@ -23,9 +23,6 @@ * └──────┴──────┴──────┴──────┴──────┤ Space├──────┤ ├──────┤ Space├──────┴──────┴──────┴──────┴──────┘ * │ │ DEL │ │ Enter│ │ * └──────┴──────┘ └──────┴──────┘ - * ┌──────┬──────┬──────┬──────┬──────┬──────┐ ┌──────┬──────┬──────┬──────┬──────┬──────┐ - * │Vol Dn│Vol Up│Vol Dn│Vol Up│Vol Dn│Vol Up│ │Vol Dn│Vol Up│Vol Dn│Vol Up│Vol Dn│Vol Up│ - * └──────┴──────┴──────┴──────┴──────┴──────┘ └──────┴──────┴──────┴──────┴──────┴──────┘ * ┌──────┬──────┬──────┬──────┬──────┐ ┌──────┬──────┬──────┬──────┬──────┐ * │Vol Dn│Vol Up│ Prev │ Play │ Next │ │Vol Dn│Vol Up│ Prev │ Play │ Next │ * └──────┴──────┴──────┴──────┴──────┘ └──────┴──────┴──────┴──────┴──────┘ @@ -65,7 +62,6 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_LCBR, KC_RCBR, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, SC_SENT, KC_LCTL, KC_LGUI, KC_LALT, RGB_TOG, ADJUST, KC_SPC, KC_PGDN, KC_DEL, KC_ENT, KC_PGUP, KC_SPC, KC_LEFT, KC_DOWN, KC_UP, KC_RGHT, KC_RCTL, - KC_VOLD, KC_VOLU, KC_VOLD, KC_VOLU, KC_VOLD, KC_VOLU, KC_VOLD, KC_VOLU, KC_VOLD, KC_VOLU, KC_VOLD, KC_VOLU, KC_VOLD, KC_VOLU, KC_MNXT, KC_MPLY, KC_MPRV, KC_VOLD, KC_VOLU, KC_MNXT, KC_MPLY, KC_MPRV ), @@ -76,7 +72,6 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { _______, KC_Z, KC_X, KC_C, KC_V, KC_B, _______, _______, KC_K, KC_M, KC_COMM, KC_DOT, KC_SLSH, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, - _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______ ), @@ -87,7 +82,6 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { _______, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_F4, KC_F8, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, _______, _______, KC_NO, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, - _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______ ), @@ -98,7 +92,6 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { _______, AU_TOGG, MU_TOGG, MU_NEXT, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, CK_TOGG, CK_UP, CK_DOWN, _______, _______, _______, _______, _______, _______, _______, KC_MPLY, KC_MNXT, KC_MUTE, KC_VOLD, KC_VOLU, - _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______ ), @@ -109,7 +102,6 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { _______, RGB_SPD, _______, RGB_SPI, _______, _______, DM_RSTP, _______, _______, KC_P1, KC_P2, KC_P3, _______, GAME, _______, RGB_RMOD,RGB_TOG, RGB_MOD, _______, _______, _______, _______, _______, _______, _______, KC_P0, KC_PDOT, KC_NUM, QWERTY, COLEMAK, - _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______ ), @@ -171,3 +163,12 @@ void render_layer_status(void) { oled_write_ln_P(PSTR("Undef"), false); } } + +#ifdef ENCODER_MAP_ENABLE +const uint16_t PROGMEM encoder_map[][NUM_ENCODERS][NUM_DIRECTIONS] = { + [0] = { ENCODER_CCW_CW(KC_VOLD, KC_VOLU), ENCODER_CCW_CW(KC_VOLD, KC_VOLU), ENCODER_CCW_CW(KC_VOLD, KC_VOLU), + ENCODER_CCW_CW(KC_PGUP, KC_PGDN), ENCODER_CCW_CW(KC_PGUP, KC_PGDN), ENCODER_CCW_CW(KC_PGUP, KC_PGDN) }, + [1 ... 4] = { ENCODER_CCW_CW(_______, _______), ENCODER_CCW_CW(_______, _______), ENCODER_CCW_CW(_______, _______), + ENCODER_CCW_CW(_______, _______), ENCODER_CCW_CW(_______, _______), ENCODER_CCW_CW(_______, _______) } +}; +#endif diff --git a/keyboards/rgbkb/sol3/keymaps/default/rules.mk b/keyboards/rgbkb/sol3/keymaps/default/rules.mk new file mode 100644 index 0000000000..ee32568148 --- /dev/null +++ b/keyboards/rgbkb/sol3/keymaps/default/rules.mk @@ -0,0 +1 @@ +ENCODER_MAP_ENABLE = yes diff --git a/keyboards/rgbkb/sol3/keymaps/kageurufu/keymap.c b/keyboards/rgbkb/sol3/keymaps/kageurufu/keymap.c index ab8f7d0ce3..0f92110ff4 100644 --- a/keyboards/rgbkb/sol3/keymaps/kageurufu/keymap.c +++ b/keyboards/rgbkb/sol3/keymaps/kageurufu/keymap.c @@ -28,7 +28,6 @@ extern keymap_config_t keymap_config; * `-------------' `--------=----' */ #define EXPAND_LAYOUT(...) LAYOUT(__VA_ARGS__, \ - KC_VOLD, KC_VOLU, KC_VOLD, KC_VOLU, KC_VOLD, KC_VOLU, KC_VOLD, KC_VOLU, KC_VOLD, KC_VOLU, KC_VOLD, KC_VOLU, \ KC_MNXT, KC_MPLY, KC_MPRV, KC_VOLD, KC_VOLU, KC_MNXT, KC_MPLY, KC_MPRV, KC_VOLD, KC_VOLU ) const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { @@ -59,3 +58,12 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { ) }; + +#ifdef ENCODER_MAP_ENABLE +const uint16_t PROGMEM encoder_map[][NUM_ENCODERS][NUM_DIRECTIONS] = { + [0] = { ENCODER_CCW_CW(KC_VOLD, KC_VOLU), ENCODER_CCW_CW(KC_VOLD, KC_VOLU), ENCODER_CCW_CW(KC_VOLD, KC_VOLU), + ENCODER_CCW_CW(KC_VOLD, KC_VOLU), ENCODER_CCW_CW(KC_VOLD, KC_VOLU), ENCODER_CCW_CW(KC_VOLD, KC_VOLU) }, + [1 ... 4] = { ENCODER_CCW_CW(_______, _______), ENCODER_CCW_CW(_______, _______), ENCODER_CCW_CW(_______, _______), + ENCODER_CCW_CW(_______, _______), ENCODER_CCW_CW(_______, _______), ENCODER_CCW_CW(_______, _______) } +}; +#endif diff --git a/keyboards/rgbkb/sol3/keymaps/kageurufu/rules.mk b/keyboards/rgbkb/sol3/keymaps/kageurufu/rules.mk index 1e5b99807c..f1adcab005 100644 --- a/keyboards/rgbkb/sol3/keymaps/kageurufu/rules.mk +++ b/keyboards/rgbkb/sol3/keymaps/kageurufu/rules.mk @@ -1 +1,2 @@ VIA_ENABLE = yes +ENCODER_MAP_ENABLE = yes diff --git a/keyboards/rgbkb/sol3/keymaps/via/keymap.c b/keyboards/rgbkb/sol3/keymaps/via/keymap.c index 1147925908..9ceb324f64 100644 --- a/keyboards/rgbkb/sol3/keymaps/via/keymap.c +++ b/keyboards/rgbkb/sol3/keymaps/via/keymap.c @@ -23,9 +23,6 @@ * └──────┴──────┴──────┴──────┴──────┤ Space├──────┤ ├──────┤ Space├──────┴──────┴──────┴──────┴──────┘ * │ │ DEL │ │ Enter│ │ * └──────┴──────┘ └──────┴──────┘ - * ┌──────┬──────┬──────┬──────┬──────┬──────┐ ┌──────┬──────┬──────┬──────┬──────┬──────┐ - * │Vol Dn│Vol Up│Vol Dn│Vol Up│Vol Dn│Vol Up│ │Vol Dn│Vol Up│Vol Dn│Vol Up│Vol Dn│Vol Up│ - * └──────┴──────┴──────┴──────┴──────┴──────┘ └──────┴──────┴──────┴──────┴──────┴──────┘ * ┌──────┬──────┬──────┬──────┬──────┐ ┌──────┬──────┬──────┬──────┬──────┐ * │Vol Dn│Vol Up│ Prev │ Play │ Next │ │Vol Dn│Vol Up│ Prev │ Play │ Next │ * └──────┴──────┴──────┴──────┴──────┘ └──────┴──────┴──────┴──────┴──────┘ @@ -68,7 +65,6 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_LCBR, KC_RCBR, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, SC_SENT, KC_LCTL, KC_LGUI, KC_LALT, RGB_TOG, ADJUST, KC_SPC, KC_PGDN, KC_DEL, KC_ENT, KC_PGUP, KC_SPC, KC_LEFT, KC_DOWN, KC_UP, KC_RGHT, KC_RCTL, - KC_VOLD, KC_VOLU, KC_VOLD, KC_VOLU, KC_VOLD, KC_VOLU, KC_VOLD, KC_VOLU, KC_VOLD, KC_VOLU, KC_VOLD, KC_VOLU, KC_VOLD, KC_VOLU, KC_MNXT, KC_MPLY, KC_MPRV, KC_VOLD, KC_VOLU, KC_MNXT, KC_MPLY, KC_MPRV ), @@ -79,7 +75,6 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { _______, KC_Z, KC_X, KC_C, KC_V, KC_B, _______, _______, KC_K, KC_M, KC_COMM, KC_DOT, KC_SLSH, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, - _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______ ), @@ -90,7 +85,6 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { _______, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_F4, KC_F8, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, _______, _______, KC_NO, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, - _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______ ), @@ -101,7 +95,6 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { _______, AU_TOGG, MU_TOGG, MU_NEXT, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, CK_TOGG, CK_UP, CK_DOWN, _______, _______, _______, _______, _______, _______, _______, KC_MPLY, KC_MNXT, KC_MUTE, KC_VOLD, KC_VOLU, - _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______ ), @@ -112,7 +105,6 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { _______, RGB_SPD, _______, RGB_SPI, _______, _______, DM_RSTP, _______, _______, KC_P1, KC_P2, KC_P3, _______, GAME, _______, RGB_RMOD,RGB_TOG, RGB_MOD, _______, _______, _______, _______, _______, _______, _______, KC_P0, KC_PDOT, KC_NUM, QWERTY, COLEMAK, - _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______ ), @@ -123,7 +115,6 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, - _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______ ), @@ -134,7 +125,6 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, - _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______ ), @@ -145,7 +135,6 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, - _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______ ) @@ -216,3 +205,12 @@ void render_layer_status(void) { oled_write_ln_P(PSTR("Undef"), false); } } + +#ifdef ENCODER_MAP_ENABLE +const uint16_t PROGMEM encoder_map[][NUM_ENCODERS][NUM_DIRECTIONS] = { + [0] = { ENCODER_CCW_CW(KC_VOLD, KC_VOLU), ENCODER_CCW_CW(KC_VOLD, KC_VOLU), ENCODER_CCW_CW(KC_VOLD, KC_VOLU), + ENCODER_CCW_CW(KC_PGUP, KC_PGDN), ENCODER_CCW_CW(KC_PGUP, KC_PGDN), ENCODER_CCW_CW(KC_PGUP, KC_PGDN) }, + [1 ... 7] = { ENCODER_CCW_CW(_______, _______), ENCODER_CCW_CW(_______, _______), ENCODER_CCW_CW(_______, _______), + ENCODER_CCW_CW(_______, _______), ENCODER_CCW_CW(_______, _______), ENCODER_CCW_CW(_______, _______) } +}; +#endif diff --git a/keyboards/rgbkb/sol3/keymaps/via/rules.mk b/keyboards/rgbkb/sol3/keymaps/via/rules.mk index 1e5b99807c..f1adcab005 100644 --- a/keyboards/rgbkb/sol3/keymaps/via/rules.mk +++ b/keyboards/rgbkb/sol3/keymaps/via/rules.mk @@ -1 +1,2 @@ VIA_ENABLE = yes +ENCODER_MAP_ENABLE = yes diff --git a/keyboards/rgbkb/sol3/rev1/info.json b/keyboards/rgbkb/sol3/rev1/info.json index 74af9d21fa..619acd4588 100644 --- a/keyboards/rgbkb/sol3/rev1/info.json +++ b/keyboards/rgbkb/sol3/rev1/info.json @@ -8,6 +8,10 @@ "pid": "0x3510", "device_version": "0.0.1" }, + "rgblight": { + "led_count": 156, + "split_count": [78, 78] + }, "ws2812": { "pin": "B5", "driver": "pwm" @@ -17,7 +21,8 @@ }, "matrix_pins": { "cols": ["A6", "A7", "B0", "B2", "B1", "B9", "B3", "B4"], - "rows": ["B15", "A8", "A15", "B12", "A3", null] + "rows": ["B15", "A8", "A15", "B12", "A3", null], + "io_delay": 5 }, "diode_direction": "COL2ROW", "encoder": { @@ -45,6 +50,9 @@ } } }, + "qmk": { + "tap_keycode_delay": 5 + }, "processor": "STM32F303", "bootloader": "stm32-dfu", "layouts": { @@ -132,20 +140,6 @@ {"matrix": [10, 1], "x": 14.5, "y": 4}, {"matrix": [10, 0], "x": 15.5, "y": 4, "w": 1.5}, - {"matrix": [5, 0], "x": 0, "y": 7, "w": 0.8, "h": 0.8}, - {"matrix": [5, 1], "x": 0.8, "y": 7, "w": 0.8, "h": 0.8}, - {"matrix": [5, 2], "x": 1.6, "y": 7, "w": 0.8, "h": 0.8}, - {"matrix": [5, 3], "x": 2.4, "y": 7, "w": 0.8, "h": 0.8}, - {"matrix": [5, 4], "x": 3.2, "y": 7, "w": 0.8, "h": 0.8}, - {"matrix": [5, 5], "x": 4, "y": 7, "w": 0.8, "h": 0.8}, - - {"matrix": [11, 0], "x": 12.2, "y": 7, "w": 0.8, "h": 0.8}, - {"matrix": [11, 1], "x": 13, "y": 7, "w": 0.8, "h": 0.8}, - {"matrix": [11, 2], "x": 13.8, "y": 7, "w": 0.8, "h": 0.8}, - {"matrix": [11, 3], "x": 14.6, "y": 7, "w": 0.8, "h": 0.8}, - {"matrix": [11, 4], "x": 15.4, "y": 7, "w": 0.8, "h": 0.8}, - {"matrix": [11, 5], "x": 16.2, "y": 7, "w": 0.8, "h": 0.8}, - {"matrix": [0, 7], "x": 0, "y": 7.8, "w": 0.8, "h": 0.8}, {"matrix": [1, 7], "x": 0.8, "y": 7.8, "w": 0.8, "h": 0.8}, {"matrix": [2, 7], "x": 1.6, "y": 7.8, "w": 0.8, "h": 0.8}, diff --git a/keyboards/rgbkb/sol3/rev1/rev1.c b/keyboards/rgbkb/sol3/rev1/rev1.c index ff330a83d6..e853ed9b98 100644 --- a/keyboards/rgbkb/sol3/rev1/rev1.c +++ b/keyboards/rgbkb/sol3/rev1/rev1.c @@ -13,27 +13,12 @@ #define NUMBER_OF_TOUCH_ENCODERS 2 #define TOUCH_ENCODER_OPTIONS TOUCH_SEGMENTS + 2 -#define NUMBER_OF_ENCODERS 6 -#define ENCODER_OPTIONS 2 - typedef struct PACKED { uint8_t r; uint8_t c; } encodermap_t; -// this maps encoders and then touch encoders to their respective electrical matrix entry -// mapping is row (y) then column (x) when looking at the electrical layout -const encodermap_t encoder_map[NUMBER_OF_ENCODERS][ENCODER_OPTIONS] = -{ - { { 5, 0 }, { 5, 1 } }, // Encoder 0 matrix entries - { { 5, 2 }, { 5, 3 } }, // Encoder 1 matrix entries - { { 5, 4 }, { 5, 5 } }, // Encoder 2 matrix entries - { { 11, 0 }, { 11, 1 } }, // Encoder 3 matrix entries - { { 11, 2 }, { 11, 3 } }, // Encoder 4 matrix entries - { { 11, 4 }, { 11, 5 } } // Encoder 5 matrix entries -}; - -const encodermap_t touch_encoder_map[NUMBER_OF_TOUCH_ENCODERS][TOUCH_ENCODER_OPTIONS] = +const encodermap_t touch_encoder_map[NUMBER_OF_TOUCH_ENCODERS][TOUCH_ENCODER_OPTIONS] = { { { 1, 7 }, { 0, 7 }, { 2, 7 }, { 5, 6 }, { 5, 7 }, }, // Touch Encoder 0 matrix entries { { 7, 7 }, { 6, 7 }, { 8, 7 }, { 11, 6 }, { 11, 7 }, } // Touch Encoder 1 matrix entries @@ -43,7 +28,7 @@ static bool limit_lightning = true; RGB rgb_matrix_hsv_to_rgb(HSV hsv) { if (limit_lightning) hsv.v /= 2; - return hsv_to_rgb(hsv); + return hsv_to_rgb(hsv); } bool dip_switch_update_kb(uint8_t index, bool active) { @@ -72,15 +57,6 @@ static void process_encoder_matrix(encodermap_t pos) { action_exec(MAKE_KEYEVENT(pos.r, pos.c, false)); } -bool encoder_update_kb(uint8_t index, bool clockwise) { - if (!encoder_update_user(index, clockwise)) - return false; - - // Mapping clockwise (typically increase) to zero, and counter clockwise (decrease) to 1 - process_encoder_matrix(encoder_map[index][clockwise ? 0 : 1]); - return false; -} - bool touch_encoder_update_kb(uint8_t index, bool clockwise) { if (!touch_encoder_update_user(index, clockwise)) return false; @@ -189,7 +165,7 @@ void rgb_matrix_increase_flags(void) #endif -__attribute__((weak)) +__attribute__((weak)) void render_layer_status(void) { // Keymap specific, expected to be overridden // Host Keyboard Layer Status @@ -245,7 +221,7 @@ oled_rotation_t oled_init_kb(oled_rotation_t rotation) { bool oled_task_kb(void) { if (!oled_task_user()) return false; - + if (is_keyboard_left()) { render_icon(); oled_write_P(PSTR(" "), false); diff --git a/keyboards/rgbkb/zen/rev1/config.h b/keyboards/rgbkb/zen/rev1/config.h index 88951a1b44..1578432cf8 100644 --- a/keyboards/rgbkb/zen/rev1/config.h +++ b/keyboards/rgbkb/zen/rev1/config.h @@ -22,8 +22,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. /* Locking resynchronize hack */ #define LOCKING_RESYNC_ENABLE -#define RGBLED_NUM 16 // Number of LEDs - /* * Feature disable options * These options are also useful to firmware size reduction. diff --git a/keyboards/rgbkb/zen/rev1/info.json b/keyboards/rgbkb/zen/rev1/info.json index 940df081c9..81370b916d 100644 --- a/keyboards/rgbkb/zen/rev1/info.json +++ b/keyboards/rgbkb/zen/rev1/info.json @@ -16,6 +16,9 @@ "split": { "soft_serial_pin": "D0" }, + "rgblight": { + "led_count": 16 + }, "ws2812": { "pin": "D1" }, diff --git a/keyboards/rgbkb/zen/rev2/config.h b/keyboards/rgbkb/zen/rev2/config.h index 394fd1630b..6f706c197b 100644 --- a/keyboards/rgbkb/zen/rev2/config.h +++ b/keyboards/rgbkb/zen/rev2/config.h @@ -22,8 +22,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. /* Locking resynchronize hack */ #define LOCKING_RESYNC_ENABLE -/* ws2812 RGB LED */ -#define RGBLED_NUM 34 // Number of LEDs #define RGBLIGHT_EFFECT_BREATHING #define RGBLIGHT_EFFECT_RAINBOW_MOOD #define RGBLIGHT_EFFECT_RAINBOW_SWIRL diff --git a/keyboards/rgbkb/zen/rev2/info.json b/keyboards/rgbkb/zen/rev2/info.json index eed39e5628..c2c4e52ec6 100644 --- a/keyboards/rgbkb/zen/rev2/info.json +++ b/keyboards/rgbkb/zen/rev2/info.json @@ -21,6 +21,9 @@ "split": { "soft_serial_pin": "D3" }, + "rgblight": { + "led_count": 34 + }, "ws2812": { "pin": "B6" }, diff --git a/keyboards/rgbkb/zen/rev2/rev2.c b/keyboards/rgbkb/zen/rev2/rev2.c index 4c308264d6..c36a32c161 100644 --- a/keyboards/rgbkb/zen/rev2/rev2.c +++ b/keyboards/rgbkb/zen/rev2/rev2.c @@ -40,11 +40,11 @@ void render_status(void) { oled_write_P(layer_name_user(get_highest_layer(layer_state)), false); // Host Keyboard LED Status - uint8_t led_usb_state = host_keyboard_leds(); + led_t led_state = host_keyboard_led_state(); oled_set_cursor(0, oled_max_lines() - 4); // Line 13 - oled_write_P(led_usb_state & (1<<USB_LED_NUM_LOCK) ? PSTR("NUMLK") : PSTR(" "), false); // Line 14 - oled_write_P(led_usb_state & (1<<USB_LED_CAPS_LOCK) ? PSTR("CAPLK") : PSTR(" "), false); // Line 15 - oled_write_P(led_usb_state & (1<<USB_LED_SCROLL_LOCK) ? PSTR("SCRLK") : PSTR(" "), false); // Line 16 + oled_write_P(led_state.num_lock ? PSTR("NUMLK") : PSTR(" "), false); // Line 14 + oled_write_P(led_state.caps_lock ? PSTR("CAPLK") : PSTR(" "), false); // Line 15 + oled_write_P(led_state.scroll_lock ? PSTR("SCRLK") : PSTR(" "), false); // Line 16 } oled_rotation_t oled_init_kb(oled_rotation_t rotation) { diff --git a/keyboards/rgbkb/zygomorph/keymaps/5x6pad/keymap.c b/keyboards/rgbkb/zygomorph/keymaps/5x6pad/keymap.c index 131ac0e820..01cccab9e5 100644 --- a/keyboards/rgbkb/zygomorph/keymaps/5x6pad/keymap.c +++ b/keyboards/rgbkb/zygomorph/keymaps/5x6pad/keymap.c @@ -253,10 +253,11 @@ void render_status(struct CharacterMatrix *matrix) { // Host Keyboard LED Status char led[40]; + led_t led_state = host_keyboard_led_state(); snprintf(led, sizeof(led), "\n%s %s %s", - (host_keyboard_leds() & (1<<USB_LED_NUM_LOCK)) ? "NUMLOCK" : " ", - (host_keyboard_leds() & (1<<USB_LED_CAPS_LOCK)) ? "CAPS" : " ", - (host_keyboard_leds() & (1<<USB_LED_SCROLL_LOCK)) ? "SCLK" : " "); + led_state.num_lock ? "NUMLOCK" : " ", + led_state.caps_lock ? "CAPS" : " ", + led_state.scroll_lock ? "SCLK" : " "); matrix_write(matrix, led); } diff --git a/keyboards/rgbkb/zygomorph/keymaps/default_oled/keymap.c b/keyboards/rgbkb/zygomorph/keymaps/default_oled/keymap.c index 63a26989b1..c4da28ba35 100644 --- a/keyboards/rgbkb/zygomorph/keymaps/default_oled/keymap.c +++ b/keyboards/rgbkb/zygomorph/keymaps/default_oled/keymap.c @@ -216,10 +216,10 @@ static void render_status(void) { } // Host Keyboard LED Status - uint8_t led_usb_state = host_keyboard_leds(); - oled_write_P(led_usb_state & (1<<USB_LED_NUM_LOCK) ? PSTR("NUMLCK ") : PSTR(" "), false); - oled_write_P(led_usb_state & (1<<USB_LED_CAPS_LOCK) ? PSTR("CAPLCK ") : PSTR(" "), false); - oled_write_ln_P(led_usb_state & (1<<USB_LED_SCROLL_LOCK) ? PSTR("SCRLCK ") : PSTR(" "), false); + led_t led_state = host_keyboard_led_state(); + oled_write_P(led_state.num_lock ? PSTR("NUMLCK ") : PSTR(" "), false); + oled_write_P(led_state.caps_lock ? PSTR("CAPLCK ") : PSTR(" "), false); + oled_write_ln_P(led_state.scroll_lock ? PSTR("SCRLCK ") : PSTR(" "), false); } bool oled_task_user(void) { diff --git a/keyboards/rgbkb/zygomorph/rev1/config.h b/keyboards/rgbkb/zygomorph/rev1/config.h index 022e361de1..a7d023893e 100644 --- a/keyboards/rgbkb/zygomorph/rev1/config.h +++ b/keyboards/rgbkb/zygomorph/rev1/config.h @@ -25,7 +25,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #define RGBLED_NUM 30 #else #define RGBLED_NUM 60 - #define RGBLED_SPLIT { 30, 30 } #endif #define RGBLIGHT_EFFECT_BREATHING diff --git a/keyboards/rgbkb/zygomorph/rev1/info.json b/keyboards/rgbkb/zygomorph/rev1/info.json index 4be3dd61d3..893e5ff589 100644 --- a/keyboards/rgbkb/zygomorph/rev1/info.json +++ b/keyboards/rgbkb/zygomorph/rev1/info.json @@ -24,6 +24,9 @@ "split": { "soft_serial_pin": "D3" }, + "rgblight": { + "split_count": [30, 30] + }, "ws2812": { "pin": "B7" }, diff --git a/keyboards/rmi_kb/chevron/info.json b/keyboards/rmi_kb/chevron/info.json index ef1d823536..48f4373c26 100644 --- a/keyboards/rmi_kb/chevron/info.json +++ b/keyboards/rmi_kb/chevron/info.json @@ -10,7 +10,7 @@ }, "matrix_pins": { "cols": ["A5", "A6", "A7", "C7", "C6", "C5", "C4", "C3", "C2", "C1", "A4", "A3", "A2", "B4"], - "rows": ["D5", "D6", "C0", "D7", null] + "rows": ["D5", "D6", "C0", "D7"] }, "diode_direction": "COL2ROW", "encoder": { @@ -136,66 +136,6 @@ {"matrix": [3, 12], "x": 12, "y": 4, "w": 1.25}, {"matrix": [3, 13], "x": 13.25, "y": 4, "w": 1.25} ] - }, - "LAYOUT_all": { - "layout": [ - {"matrix": [4, 0], "x": 11.5, "y": 0}, - {"matrix": [1, 13], "x": 12.5, "y": 0}, - {"matrix": [4, 1], "x": 13.5, "y": 0}, - - {"matrix": [0, 0], "x": 0, "y": 1}, - {"matrix": [0, 1], "x": 1, "y": 1}, - {"matrix": [0, 2], "x": 2, "y": 1}, - {"matrix": [0, 3], "x": 3, "y": 1}, - {"matrix": [0, 4], "x": 4, "y": 1}, - {"matrix": [0, 5], "x": 5, "y": 1}, - {"matrix": [0, 6], "x": 6, "y": 1}, - {"matrix": [0, 7], "x": 7, "y": 1}, - {"matrix": [0, 8], "x": 8, "y": 1}, - {"matrix": [0, 9], "x": 9, "y": 1}, - {"matrix": [0, 10], "x": 10, "y": 1}, - {"matrix": [0, 11], "x": 11, "y": 1}, - {"matrix": [0, 12], "x": 12, "y": 1}, - {"matrix": [0, 13], "x": 13, "y": 1, "w": 1.5}, - - {"matrix": [1, 0], "x": 0, "y": 2, "w": 1.25}, - {"matrix": [1, 1], "x": 1.25, "y": 2}, - {"matrix": [1, 2], "x": 2.25, "y": 2}, - {"matrix": [1, 3], "x": 3.25, "y": 2}, - {"matrix": [1, 4], "x": 4.25, "y": 2}, - {"matrix": [1, 5], "x": 5.25, "y": 2}, - {"matrix": [1, 6], "x": 6.25, "y": 2}, - {"matrix": [1, 7], "x": 7.25, "y": 2}, - {"matrix": [1, 8], "x": 8.25, "y": 2}, - {"matrix": [1, 9], "x": 9.25, "y": 2}, - {"matrix": [1, 10], "x": 10.25, "y": 2}, - {"matrix": [1, 11], "x": 11.25, "y": 2}, - {"matrix": [1, 12], "x": 12.25, "y": 2, "w": 2.25}, - - {"matrix": [2, 0], "x": 0, "y": 3, "w": 1.75}, - {"matrix": [2, 1], "x": 1.75, "y": 3}, - {"matrix": [2, 2], "x": 2.75, "y": 3}, - {"matrix": [2, 3], "x": 3.75, "y": 3}, - {"matrix": [2, 4], "x": 4.75, "y": 3}, - {"matrix": [2, 5], "x": 5.75, "y": 3}, - {"matrix": [2, 6], "x": 6.75, "y": 3}, - {"matrix": [2, 7], "x": 7.75, "y": 3}, - {"matrix": [2, 8], "x": 8.75, "y": 3}, - {"matrix": [2, 9], "x": 9.75, "y": 3}, - {"matrix": [2, 10], "x": 10.75, "y": 3}, - {"matrix": [2, 12], "x": 11.75, "y": 3, "w": 1.75}, - {"matrix": [2, 13], "x": 13.5, "y": 3}, - - {"matrix": [3, 0], "x": 0, "y": 4, "w": 1.25}, - {"matrix": [3, 1], "x": 1.25, "y": 4, "w": 1.25}, - {"matrix": [3, 2], "x": 2.5, "y": 4, "w": 1.25}, - {"matrix": [3, 4], "x": 3.75, "y": 4, "w": 3}, - {"matrix": [3, 6], "x": 6.75, "y": 4}, - {"matrix": [3, 8], "x": 7.75, "y": 4, "w": 3}, - {"matrix": [3, 11], "x": 10.75, "y": 4, "w": 1.25}, - {"matrix": [3, 12], "x": 12, "y": 4, "w": 1.25}, - {"matrix": [3, 13], "x": 13.25, "y": 4, "w": 1.25} - ] } } } diff --git a/keyboards/rmi_kb/chevron/keymaps/via/keymap.c b/keyboards/rmi_kb/chevron/keymaps/via/keymap.c index 8651a3dee7..6ebf4eb7c0 100644 --- a/keyboards/rmi_kb/chevron/keymaps/via/keymap.c +++ b/keyboards/rmi_kb/chevron/keymaps/via/keymap.c @@ -16,29 +16,29 @@ #include QMK_KEYBOARD_H const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { - [0] = LAYOUT_all( - KC_VOLD, KC_MUTE, KC_VOLU, + [0] = LAYOUT_ansi( + KC_MUTE, KC_ESC, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_TAB, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, MO(1), KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, MO(1), KC_BSPC, KC_RALT, KC_RGUI, KC_RCTL ), - [1] = LAYOUT_all( - _______, _______, _______, + [1] = LAYOUT_ansi( + _______, KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, _______, _______, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, _______, _______, _______, KC_F11, KC_F12, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______ ), - [2] = LAYOUT_all( - _______, _______, _______, + [2] = LAYOUT_ansi( + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______ ), - [3] = LAYOUT_all( - _______, _______, _______, + [3] = LAYOUT_ansi( + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, @@ -46,43 +46,11 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { ), }; -keyevent_t encoder_ccw = { - .key = (keypos_t){.row = 4, .col = 0}, - .pressed = false, - .type = KEY_EVENT +#ifdef ENCODER_MAP_ENABLE +const uint16_t PROGMEM encoder_map[][NUM_ENCODERS][NUM_DIRECTIONS] = { + [0] = { ENCODER_CCW_CW(KC_VOLD, KC_VOLU) }, + [1] = { ENCODER_CCW_CW(_______, _______) }, + [2] = { ENCODER_CCW_CW(_______, _______) }, + [3] = { ENCODER_CCW_CW(_______, _______) }, }; - -keyevent_t encoder_cw = { - .key = (keypos_t){.row = 4, .col = 1}, - .pressed = false, - .type = KEY_EVENT -}; - -void matrix_scan_user(void) { - if (encoder_ccw.pressed) { - encoder_ccw.pressed = false; - encoder_ccw.time = timer_read(); - action_exec(encoder_ccw); - } - - if (encoder_cw.pressed) { - encoder_cw.pressed = false; - encoder_cw.time = timer_read(); - action_exec(encoder_cw); - } -} - -bool encoder_update_user(uint8_t index, bool clockwise) { - if (clockwise) { - encoder_cw.pressed = true; - encoder_cw.time = timer_read(); - action_exec(encoder_cw); - wait_ms(20); - } else { - encoder_ccw.pressed = true; - encoder_ccw.time = timer_read(); - action_exec(encoder_ccw); - wait_ms(20); - } - return true; -} +#endif diff --git a/keyboards/rmi_kb/chevron/keymaps/via/rules.mk b/keyboards/rmi_kb/chevron/keymaps/via/rules.mk index 1e5b99807c..f1adcab005 100644 --- a/keyboards/rmi_kb/chevron/keymaps/via/rules.mk +++ b/keyboards/rmi_kb/chevron/keymaps/via/rules.mk @@ -1 +1,2 @@ VIA_ENABLE = yes +ENCODER_MAP_ENABLE = yes diff --git a/keyboards/rmi_kb/herringbone/pro/info.json b/keyboards/rmi_kb/herringbone/pro/info.json index e02c428ab8..bbef69f28a 100644 --- a/keyboards/rmi_kb/herringbone/pro/info.json +++ b/keyboards/rmi_kb/herringbone/pro/info.json @@ -329,9 +329,7 @@ {"matrix": [5, 9], "x": 10, "y": 5.25, "w": 1.5}, {"matrix": [5, 10], "x": 11.5, "y": 5.25, "w": 1.5}, - {"matrix": [5, 12], "x": 13.25, "y": 5.5}, - {"matrix": [5, 13], "x": 14.25, "y": 5.5}, - {"matrix": [5, 14], "x": 15.25, "y": 5.5} + {"matrix": [5, 13], "x": 14.25, "y": 5.5} ] } } diff --git a/keyboards/rmi_kb/herringbone/pro/keymaps/via/keymap.c b/keyboards/rmi_kb/herringbone/pro/keymaps/via/keymap.c index dbf282b68f..9df8143fb7 100644 --- a/keyboards/rmi_kb/herringbone/pro/keymaps/via/keymap.c +++ b/keyboards/rmi_kb/herringbone/pro/keymaps/via/keymap.c @@ -19,7 +19,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { [0] = LAYOUT_all( - KC_ESC, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_PSCR, KC_VOLD, KC_MUTE, KC_VOLU, + KC_ESC, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_PSCR, KC_MUTE, KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_BSPC, KC_HOME, KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_PGUP, KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, KC_PGDN, @@ -27,7 +27,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { KC_LCTL, KC_LGUI, KC_LALT, KC_NO, KC_SPC, KC_NO, KC_RALT, KC_RCTL, KC_LEFT, KC_DOWN, KC_RGHT ), [1] = LAYOUT_all( - QK_BOOT, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + QK_BOOT, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, @@ -35,7 +35,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______ ), [2] = LAYOUT_all( - _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, @@ -43,7 +43,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______ ), [3] = LAYOUT_all( - _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, @@ -52,31 +52,14 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { ), }; -keyevent_t encoder_ccw = { - .key = (keypos_t){.row = 6, .col = 0}, - .pressed = false, - .type = KEY_EVENT - }; - -keyevent_t encoder_cw = { - .key = (keypos_t){.row = 6, .col = 1}, - .pressed = false, - .type = KEY_EVENT +#ifdef ENCODER_MAP_ENABLE +const uint16_t PROGMEM encoder_map[][NUM_ENCODERS][NUM_DIRECTIONS] = { + [0] = { ENCODER_CCW_CW(KC_VOLD, KC_VOLU) }, + [1] = { ENCODER_CCW_CW(_______, _______) }, + [2] = { ENCODER_CCW_CW(_______, _______) }, + [3] = { ENCODER_CCW_CW(_______, _______) }, }; - -void matrix_scan_user(void) { - if (encoder_ccw.pressed) { - encoder_ccw.pressed = false; - encoder_ccw.time = timer_read(); - action_exec(encoder_ccw); - } - - if (encoder_cw.pressed) { - encoder_cw.pressed = false; - encoder_cw.time = timer_read(); - action_exec(encoder_cw); - } -} +#endif #ifdef OLED_ENABLE uint32_t anim_timer = 0; @@ -85,25 +68,6 @@ uint8_t current_frame = 0; #define FRAME_DURATION 50 -bool encoder_update_user(uint8_t index, bool clockwise) { - if (clockwise) { - encoder_cw.pressed = true; - encoder_cw.time = timer_read(); - action_exec(encoder_cw); - wait_ms(20); - anim_sleep = timer_read32(); - oled_on(); - } else { - encoder_ccw.pressed = true; - encoder_ccw.time = timer_read(); - action_exec(encoder_ccw); - wait_ms(20); - anim_sleep = timer_read32(); - oled_on(); - } - return true; -} - static void render_pattern(void) { void animate(void) { oled_set_cursor(4, 0); diff --git a/keyboards/rmi_kb/herringbone/pro/keymaps/via/rules.mk b/keyboards/rmi_kb/herringbone/pro/keymaps/via/rules.mk index 1e5b99807c..f1adcab005 100644 --- a/keyboards/rmi_kb/herringbone/pro/keymaps/via/rules.mk +++ b/keyboards/rmi_kb/herringbone/pro/keymaps/via/rules.mk @@ -1 +1,2 @@ VIA_ENABLE = yes +ENCODER_MAP_ENABLE = yes diff --git a/keyboards/rmi_kb/squishy65/config.h b/keyboards/rmi_kb/squishy65/config.h index b4efbc241c..4184f7de3f 100644 --- a/keyboards/rmi_kb/squishy65/config.h +++ b/keyboards/rmi_kb/squishy65/config.h @@ -17,7 +17,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #pragma once -#define RGBLED_NUM 18 #define RGBLIGHT_EFFECT_BREATHING #define RGBLIGHT_EFFECT_RAINBOW_MOOD #define RGBLIGHT_EFFECT_RAINBOW_SWIRL diff --git a/keyboards/rmi_kb/squishy65/info.json b/keyboards/rmi_kb/squishy65/info.json index 35aeac5706..d94f8ef40e 100644 --- a/keyboards/rmi_kb/squishy65/info.json +++ b/keyboards/rmi_kb/squishy65/info.json @@ -8,6 +8,9 @@ "pid": "0x10B5", "device_version": "0.6.5" }, + "rgblight": { + "led_count": 18 + }, "ws2812": { "pin": "B15" }, diff --git a/keyboards/rmi_kb/squishy65/rules.mk b/keyboards/rmi_kb/squishy65/rules.mk index 4eaa5819ac..31f4f7acad 100644 --- a/keyboards/rmi_kb/squishy65/rules.mk +++ b/keyboards/rmi_kb/squishy65/rules.mk @@ -11,5 +11,3 @@ BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality RGBLIGHT_ENABLE = yes # Enable keyboard RGB underglow AUDIO_ENABLE = no # Audio output -# Enter lower-power sleep mode when on the ChibiOS idle thread -OPT_DEFS += -DCORTEX_ENABLE_WFI_IDLE=TRUE diff --git a/keyboards/rmi_kb/squishyfrl/config.h b/keyboards/rmi_kb/squishyfrl/config.h index 1433de8106..bb7b14c3cd 100644 --- a/keyboards/rmi_kb/squishyfrl/config.h +++ b/keyboards/rmi_kb/squishyfrl/config.h @@ -17,11 +17,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #pragma once -# define RGBLED_NUM 16 -//# define RGBLIGHT_HUE_STEP 8 -//# define RGBLIGHT_SAT_STEP 8 -//# define RGBLIGHT_VAL_STEP 8 -//# define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */ #define RGBLIGHT_EFFECT_BREATHING #define RGBLIGHT_EFFECT_RAINBOW_MOOD #define RGBLIGHT_EFFECT_RAINBOW_SWIRL diff --git a/keyboards/rmi_kb/squishyfrl/info.json b/keyboards/rmi_kb/squishyfrl/info.json index f6ab10f5d9..4ec0c9243d 100644 --- a/keyboards/rmi_kb/squishyfrl/info.json +++ b/keyboards/rmi_kb/squishyfrl/info.json @@ -8,6 +8,9 @@ "pid": "0x4BE5", "device_version": "0.0.1" }, + "rgblight": { + "led_count": 16 + }, "ws2812": { "pin": "C15" }, diff --git a/keyboards/rmi_kb/squishyfrl/rules.mk b/keyboards/rmi_kb/squishyfrl/rules.mk index 5c31520ab4..d612de6c5f 100644 --- a/keyboards/rmi_kb/squishyfrl/rules.mk +++ b/keyboards/rmi_kb/squishyfrl/rules.mk @@ -11,5 +11,3 @@ BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality RGBLIGHT_ENABLE = yes # Enable keyboard RGB underglow AUDIO_ENABLE = no # Audio output -# Enter lower-power sleep mode when on the ChibiOS idle thread -OPT_DEFS += -DCORTEX_ENABLE_WFI_IDLE=TRUE diff --git a/keyboards/rmi_kb/squishytkl/config.h b/keyboards/rmi_kb/squishytkl/config.h index 1433de8106..bb7b14c3cd 100644 --- a/keyboards/rmi_kb/squishytkl/config.h +++ b/keyboards/rmi_kb/squishytkl/config.h @@ -17,11 +17,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #pragma once -# define RGBLED_NUM 16 -//# define RGBLIGHT_HUE_STEP 8 -//# define RGBLIGHT_SAT_STEP 8 -//# define RGBLIGHT_VAL_STEP 8 -//# define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */ #define RGBLIGHT_EFFECT_BREATHING #define RGBLIGHT_EFFECT_RAINBOW_MOOD #define RGBLIGHT_EFFECT_RAINBOW_SWIRL diff --git a/keyboards/rmi_kb/squishytkl/info.json b/keyboards/rmi_kb/squishytkl/info.json index b49d72c829..f2ebdf503a 100644 --- a/keyboards/rmi_kb/squishytkl/info.json +++ b/keyboards/rmi_kb/squishytkl/info.json @@ -8,6 +8,9 @@ "pid": "0x00B1", "device_version": "1.0.0" }, + "rgblight": { + "led_count": 16 + }, "ws2812": { "pin": "C15" }, @@ -457,10 +460,7 @@ {"matrix": [7, 23], "x": 15.25, "y": 5.75}, {"matrix": [7, 24], "x": 16.25, "y": 5.75}, - {"matrix": [7, 25], "x": 17.25, "y": 5.75}, - - {"matrix": [13, 0], "x": 18.5, "y": 0}, - {"matrix": [13, 1], "x": 18.5, "y": 1} + {"matrix": [7, 25], "x": 17.25, "y": 5.75} ] } } diff --git a/keyboards/rmi_kb/squishytkl/keymaps/via/keymap.c b/keyboards/rmi_kb/squishytkl/keymaps/via/keymap.c index 2c33b4869c..ea11eadd08 100644 --- a/keyboards/rmi_kb/squishytkl/keymaps/via/keymap.c +++ b/keyboards/rmi_kb/squishytkl/keymaps/via/keymap.c @@ -22,46 +22,12 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_DEL, KC_END, KC_PGDN, KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, KC_LSFT, KC_NO, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_NO, KC_UP, - KC_LCTL, KC_LGUI, KC_LALT, KC_NO, KC_NO, KC_SPC, KC_NO, KC_RALT, KC_RGUI, KC_MENU, KC_RCTL, KC_LEFT, KC_DOWN, KC_RGHT, - KC_VOLU, KC_VOLD - ), + KC_LCTL, KC_LGUI, KC_LALT, KC_NO, KC_NO, KC_SPC, KC_NO, KC_RALT, KC_RGUI, KC_MENU, KC_RCTL, KC_LEFT, KC_DOWN, KC_RGHT + ) }; -keyevent_t encoder_ccw = { - .key = (keypos_t){.row = 13, .col = 0}, - .pressed = false, - .type = KEY_EVENT +#ifdef ENCODER_MAP_ENABLE +const uint16_t PROGMEM encoder_map[][NUM_ENCODERS][NUM_DIRECTIONS] = { + [0] = { ENCODER_CCW_CW(KC_VOLD, KC_VOLU) } }; - -keyevent_t encoder_cw = { - .key = (keypos_t){.row = 13, .col = 1}, - .pressed = false, - .type = KEY_EVENT -}; - -void matrix_scan_user(void) { - if (encoder_ccw.pressed) { - encoder_ccw.pressed = false; - encoder_ccw.time = timer_read(); - action_exec(encoder_ccw); - } - - if (encoder_cw.pressed) { - encoder_cw.pressed = false; - encoder_cw.time = timer_read(); - action_exec(encoder_cw); - } -} - -bool encoder_update_user(uint8_t index, bool clockwise) { - if (clockwise) { - encoder_cw.pressed = true; - encoder_cw.time = timer_read(); - action_exec(encoder_cw); - } else { - encoder_ccw.pressed = true; - encoder_ccw.time = timer_read(); - action_exec(encoder_ccw); - } - return true; -} +#endif diff --git a/keyboards/rmi_kb/squishytkl/keymaps/via/rules.mk b/keyboards/rmi_kb/squishytkl/keymaps/via/rules.mk index 1e5b99807c..f1adcab005 100644 --- a/keyboards/rmi_kb/squishytkl/keymaps/via/rules.mk +++ b/keyboards/rmi_kb/squishytkl/keymaps/via/rules.mk @@ -1 +1,2 @@ VIA_ENABLE = yes +ENCODER_MAP_ENABLE = yes diff --git a/keyboards/rmi_kb/squishytkl/rules.mk b/keyboards/rmi_kb/squishytkl/rules.mk index ae292c0a5a..a84e51ab51 100644 --- a/keyboards/rmi_kb/squishytkl/rules.mk +++ b/keyboards/rmi_kb/squishytkl/rules.mk @@ -11,6 +11,3 @@ BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality RGBLIGHT_ENABLE = yes # Enable keyboard RGB underglow AUDIO_ENABLE = no # Audio output ENCODER_ENABLE = yes # Enable rotary encoder fuctionality - -# Enter lower-power sleep mode when on the ChibiOS idle thread -OPT_DEFS += -DCORTEX_ENABLE_WFI_IDLE=TRUE
\ No newline at end of file diff --git a/keyboards/rmi_kb/tkl_ff/v2/config.h b/keyboards/rmi_kb/tkl_ff/v2/config.h index b5d023489a..6ada421d93 100644 --- a/keyboards/rmi_kb/tkl_ff/v2/config.h +++ b/keyboards/rmi_kb/tkl_ff/v2/config.h @@ -19,11 +19,6 @@ #define RGBLIGHT_LAYERS #define RGBLIGHT_LAYERS_OVERRIDE_RGB_OFF -# define RGBLED_NUM 26 -# define RGBLIGHT_HUE_STEP 32 -# define RGBLIGHT_SAT_STEP 32 -# define RGBLIGHT_VAL_STEP 32 -//# define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */ # define RGBLIGHT_EFFECT_BREATHING # define RGBLIGHT_EFFECT_RAINBOW_MOOD # define RGBLIGHT_EFFECT_RAINBOW_SWIRL diff --git a/keyboards/rmi_kb/tkl_ff/v2/info.json b/keyboards/rmi_kb/tkl_ff/v2/info.json index a7617b5f30..01fdf2ec46 100644 --- a/keyboards/rmi_kb/tkl_ff/v2/info.json +++ b/keyboards/rmi_kb/tkl_ff/v2/info.json @@ -2,6 +2,12 @@ "usb": { "pid": "0x10FF" }, + "rgblight": { + "hue_steps": 32, + "saturation_steps": 32, + "brightness_steps": 32, + "led_count": 26 + }, "ws2812": { "pin": "E2" } diff --git a/keyboards/rmi_kb/wete/v1/config.h b/keyboards/rmi_kb/wete/v1/config.h index c4d0637afe..b45bf03be5 100644 --- a/keyboards/rmi_kb/wete/v1/config.h +++ b/keyboards/rmi_kb/wete/v1/config.h @@ -21,7 +21,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #define BACKLIGHT_PWM_CHANNEL 1 #define BACKLIGHT_PAL_MODE 1 -#define RGBLED_NUM 24 #define RGBLIGHT_EFFECT_BREATHING #define RGBLIGHT_EFFECT_RAINBOW_MOOD #define RGBLIGHT_EFFECT_RAINBOW_SWIRL diff --git a/keyboards/rmi_kb/wete/v1/info.json b/keyboards/rmi_kb/wete/v1/info.json index c3ae142d31..df88e509b0 100644 --- a/keyboards/rmi_kb/wete/v1/info.json +++ b/keyboards/rmi_kb/wete/v1/info.json @@ -18,6 +18,9 @@ "levels": 24, "breathing": true }, + "rgblight": { + "led_count": 24 + }, "ws2812": { "pin": "B4" }, diff --git a/keyboards/rmi_kb/wete/v1/rules.mk b/keyboards/rmi_kb/wete/v1/rules.mk index e81a5dd98e..108db79ad0 100644 --- a/keyboards/rmi_kb/wete/v1/rules.mk +++ b/keyboards/rmi_kb/wete/v1/rules.mk @@ -12,5 +12,3 @@ RGBLIGHT_ENABLE = yes # Enable keyboard RGB underglow AUDIO_ENABLE = no # Audio output SLEEP_LED_ENABLE = yes -# Enter lower-power sleep mode when on the ChibiOS idle thread -OPT_DEFS += -DCORTEX_ENABLE_WFI_IDLE=TRUE diff --git a/keyboards/rmi_kb/wete/v2/config.h b/keyboards/rmi_kb/wete/v2/config.h index 3c46afada5..bad6ef83de 100644 --- a/keyboards/rmi_kb/wete/v2/config.h +++ b/keyboards/rmi_kb/wete/v2/config.h @@ -20,11 +20,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #define RGBLIGHT_LAYERS #define RGBLIGHT_LAYERS_OVERRIDE_RGB_OFF -# define RGBLED_NUM 18 -# define RGBLIGHT_HUE_STEP 32 -# define RGBLIGHT_SAT_STEP 32 -# define RGBLIGHT_VAL_STEP 32 -//# define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */ # define RGBLIGHT_EFFECT_BREATHING # define RGBLIGHT_EFFECT_RAINBOW_MOOD # define RGBLIGHT_EFFECT_RAINBOW_SWIRL diff --git a/keyboards/rmi_kb/wete/v2/info.json b/keyboards/rmi_kb/wete/v2/info.json index f1e87a6e28..364a61bf44 100644 --- a/keyboards/rmi_kb/wete/v2/info.json +++ b/keyboards/rmi_kb/wete/v2/info.json @@ -18,6 +18,12 @@ {"pin_a": "D2", "pin_b": "D1"} ] }, + "rgblight": { + "hue_steps": 32, + "saturation_steps": 32, + "brightness_steps": 32, + "led_count": 18 + }, "ws2812": { "pin": "D0" }, @@ -393,10 +399,7 @@ {"matrix": [10, 8], "x": 16.25, "y": 5.25}, {"matrix": [11, 8], "x": 17.25, "y": 5.25}, {"matrix": [10, 9], "x": 18.25, "y": 5.25}, - {"matrix": [11, 9], "x": 19.25, "y": 5.25}, - - {"matrix": [12, 0], "x": 19, "y": 0, "w": 0.5}, - {"matrix": [12, 1], "x": 20.5, "y": 0, "w": 0.5} + {"matrix": [11, 9], "x": 19.25, "y": 5.25} ] } } diff --git a/keyboards/rmi_kb/wete/v2/keymaps/via/keymap.c b/keyboards/rmi_kb/wete/v2/keymaps/via/keymap.c index 05df87fc94..8d4f3c88eb 100644 --- a/keyboards/rmi_kb/wete/v2/keymaps/via/keymap.c +++ b/keyboards/rmi_kb/wete/v2/keymaps/via/keymap.c @@ -14,6 +14,7 @@ * along with this program. If not, see <http://www.gnu.org/licenses/>. */ #include QMK_KEYBOARD_H + const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { [0] = LAYOUT_all( KC_PSCR, KC_SCRL, KC_PAUS, KC_INS, KC_ESC, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_DEL, @@ -21,8 +22,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { KC_P7, KC_P8, KC_P9, KC_PPLS, KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_END, KC_P4, KC_P5, KC_P6, KC_NO, KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, KC_PGUP, KC_P1, KC_P2, KC_P3, KC_PENT, KC_LSFT, KC_NO, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_UP, KC_PGDN, - KC_P0, KC_NO, KC_PDOT, KC_NO, KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_RALT, KC_RCTL, KC_NO, KC_LEFT, KC_DOWN, KC_RGHT, - KC_VOLD, KC_VOLU + KC_P0, KC_NO, KC_PDOT, KC_NO, KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_RALT, KC_RCTL, KC_NO, KC_LEFT, KC_DOWN, KC_RGHT ), [1] = LAYOUT_all( _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, @@ -30,49 +30,16 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, - _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, - _______, _______ + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______ ), }; -keyevent_t encoder_ccw = { - .key = (keypos_t){.row = 12, .col = 0}, - .pressed = false, - .type = KEY_EVENT -}; - -keyevent_t encoder_cw = { - .key = (keypos_t){.row = 12, .col = 1}, - .pressed = false, - .type = KEY_EVENT +#ifdef ENCODER_MAP_ENABLE +const uint16_t PROGMEM encoder_map[][NUM_ENCODERS][NUM_DIRECTIONS] = { + [0] = { ENCODER_CCW_CW(KC_VOLD, KC_VOLU) }, + [1] = { ENCODER_CCW_CW(_______, _______) } }; - -void matrix_scan_user(void) { - if (encoder_ccw.pressed) { - encoder_ccw.pressed = false; - encoder_ccw.time = timer_read(); - action_exec(encoder_ccw); - } - - if (encoder_cw.pressed) { - encoder_cw.pressed = false; - encoder_cw.time = timer_read(); - action_exec(encoder_cw); - } -} - -bool encoder_update_user(uint8_t index, bool clockwise) { - if (clockwise) { - encoder_cw.pressed = true; - encoder_cw.time = timer_read(); - action_exec(encoder_cw); - } else { - encoder_ccw.pressed = true; - encoder_ccw.time = timer_read(); - action_exec(encoder_ccw); - } - return true; -} +#endif #ifdef RGBLIGHT_ENABLE // Can probably still be optimized, but I like it as is for clarity diff --git a/keyboards/rmi_kb/wete/v2/keymaps/via/rules.mk b/keyboards/rmi_kb/wete/v2/keymaps/via/rules.mk index 1e5b99807c..f1adcab005 100644 --- a/keyboards/rmi_kb/wete/v2/keymaps/via/rules.mk +++ b/keyboards/rmi_kb/wete/v2/keymaps/via/rules.mk @@ -1 +1,2 @@ VIA_ENABLE = yes +ENCODER_MAP_ENABLE = yes diff --git a/keyboards/rocketboard_16/config.h b/keyboards/rocketboard_16/config.h index 64c493ace8..2c81b4cb7b 100644 --- a/keyboards/rocketboard_16/config.h +++ b/keyboards/rocketboard_16/config.h @@ -27,17 +27,11 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #define RGBLIGHT_EFFECT_RGB_TEST #define RGBLIGHT_EFFECT_ALTERNATING #define RGBLIGHT_EFFECT_TWINKLE -#define RGBLED_NUM 16 -#define RGBLIGHT_VAL_STEP 8 -#define RGBLIGHT_SLEEP // OLED stuff #define OLED_DISPLAY_128X64 #define OLED_FONT_H "custom_font.h" -// Allows for rotary encoder volume control -#define TAP_CODE_DELAY 20 - #define LOCKING_SUPPORT_ENABLE #define LOCKING_RESYNC_ENABLE diff --git a/keyboards/rocketboard_16/info.json b/keyboards/rocketboard_16/info.json index 00006749d8..4b0b5f481a 100644 --- a/keyboards/rocketboard_16/info.json +++ b/keyboards/rocketboard_16/info.json @@ -21,9 +21,17 @@ {"pin_a": "A2", "pin_b": "A3"} ] }, + "qmk": { + "tap_keycode_delay": 20 + }, "bootmagic": { "matrix": [4, 1] }, + "rgblight": { + "brightness_steps": 8, + "led_count": 16, + "sleep": true + }, "ws2812": { "pin": "A4" }, diff --git a/keyboards/rocketboard_16/rules.mk b/keyboards/rocketboard_16/rules.mk index dd493f5f18..110ba7d10a 100644 --- a/keyboards/rocketboard_16/rules.mk +++ b/keyboards/rocketboard_16/rules.mk @@ -22,7 +22,4 @@ ENCODER_ENABLE = yes RAW_ENABLE = yes # Enables HID RAW communication between the board and the PC -# Enter lower-power sleep mode when on the ChibiOS idle thread -OPT_DEFS += -DCORTEX_ENABLE_WFI_IDLE=TRUE - LTO_ENABLE = yes diff --git a/keyboards/rominronin/katana60/rev1/config.h b/keyboards/rominronin/katana60/rev1/config.h index 6c1b144b58..13f0a19cbd 100644 --- a/keyboards/rominronin/katana60/rev1/config.h +++ b/keyboards/rominronin/katana60/rev1/config.h @@ -22,8 +22,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. /* Locking resynchronize hack */ #define LOCKING_RESYNC_ENABLE -#define TAPPING_TERM 200 - /* * Feature disable options * These options are also useful to firmware size reduction. diff --git a/keyboards/rominronin/katana60/rev1/keymaps/josefadamcik/keymap.c b/keyboards/rominronin/katana60/rev1/keymaps/josefadamcik/keymap.c index 02bd23a9b4..ca2be62a19 100644 --- a/keyboards/rominronin/katana60/rev1/keymaps/josefadamcik/keymap.c +++ b/keyboards/rominronin/katana60/rev1/keymaps/josefadamcik/keymap.c @@ -120,14 +120,6 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { ) }; -void matrix_init_user(void) { - -} - -void matrix_scan_user(void) { - -} - bool process_record_user(uint16_t keycode, keyrecord_t *record) { switch (keycode) { case M_QWERTY: @@ -157,7 +149,3 @@ bool process_record_user(uint16_t keycode, keyrecord_t *record) { } return true; } - -void led_set_user(uint8_t usb_led) { - -} diff --git a/keyboards/rominronin/katana60/rev1/keymaps/msiu/keymap.c b/keyboards/rominronin/katana60/rev1/keymaps/msiu/keymap.c index a65a5260b5..7850d38c90 100644 --- a/keyboards/rominronin/katana60/rev1/keymaps/msiu/keymap.c +++ b/keyboards/rominronin/katana60/rev1/keymaps/msiu/keymap.c @@ -48,23 +48,3 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______ ) }; - - - - - -void matrix_init_user(void) { - -} - -void matrix_scan_user(void) { - -} - -bool process_record_user(uint16_t keycode, keyrecord_t *record) { - return true; -} - -void led_set_user(uint8_t usb_led) { - -} diff --git a/keyboards/rominronin/katana60/rev1/keymaps/rominronin/keymap.c b/keyboards/rominronin/katana60/rev1/keymaps/rominronin/keymap.c index 6fa09146ed..615de932f8 100644 --- a/keyboards/rominronin/katana60/rev1/keymaps/rominronin/keymap.c +++ b/keyboards/rominronin/katana60/rev1/keymaps/rominronin/keymap.c @@ -63,20 +63,3 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { ) }; - - -void matrix_init_user(void) { - -} - -void matrix_scan_user(void) { - -} - -bool process_record_user(uint16_t keycode, keyrecord_t *record) { - return true; -} - -void led_set_user(uint8_t usb_led) { - -} diff --git a/keyboards/rominronin/katana60/rev2/config.h b/keyboards/rominronin/katana60/rev2/config.h index 0de481d0de..8e3d35a7be 100644 --- a/keyboards/rominronin/katana60/rev2/config.h +++ b/keyboards/rominronin/katana60/rev2/config.h @@ -22,8 +22,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. /* Locking resynchronize hack */ #define LOCKING_RESYNC_ENABLE -#define TAPPING_TERM 200 - /* * Feature disable options * These options are also useful to firmware size reduction. diff --git a/keyboards/rpiguy9907/southpaw66/config.h b/keyboards/rpiguy9907/southpaw66/config.h index 99fb7f54ea..b4da5d530f 100644 --- a/keyboards/rpiguy9907/southpaw66/config.h +++ b/keyboards/rpiguy9907/southpaw66/config.h @@ -16,9 +16,6 @@ #pragma once - -#define TAPPING_TERM 400 - /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ #define LOCKING_SUPPORT_ENABLE /* Locking resynchronize hack */ diff --git a/keyboards/rpiguy9907/southpaw66/info.json b/keyboards/rpiguy9907/southpaw66/info.json index 3cebdcb4a8..6c90980e7c 100644 --- a/keyboards/rpiguy9907/southpaw66/info.json +++ b/keyboards/rpiguy9907/southpaw66/info.json @@ -16,6 +16,9 @@ "bootmagic": { "matrix": [1, 0] }, + "tapping": { + "term": 400 + }, "processor": "atmega32u4", "bootloader": "caterina", "layouts": { diff --git a/keyboards/runes/vaengr/config.h b/keyboards/runes/vaengr/config.h index 2f307f633f..0a344fbbaa 100644 --- a/keyboards/runes/vaengr/config.h +++ b/keyboards/runes/vaengr/config.h @@ -27,11 +27,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #define RGBLIGHT_EFFECT_RGB_TEST #define RGBLIGHT_EFFECT_ALTERNATING #define RGBLIGHT_EFFECT_TWINKLE -#define RGBLED_NUM 10 -#define RGBLIGHT_HUE_STEP 10 -#define RGBLIGHT_SAT_STEP 17 -#define RGBLIGHT_VAL_STEP 17 -#define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */ /* * Feature disable options diff --git a/keyboards/runes/vaengr/info.json b/keyboards/runes/vaengr/info.json index 98354c2900..51473b5667 100644 --- a/keyboards/runes/vaengr/info.json +++ b/keyboards/runes/vaengr/info.json @@ -9,6 +9,11 @@ "device_version": "0.0.1", "force_nkro": true }, + "rgblight": { + "hue_steps": 10, + "led_count": 10, + "sleep": true + }, "ws2812": { "pin": "C7" }, diff --git a/keyboards/rura66/rev1/config.h b/keyboards/rura66/rev1/config.h index 8afe563b68..e36d93ee00 100644 --- a/keyboards/rura66/rev1/config.h +++ b/keyboards/rura66/rev1/config.h @@ -21,14 +21,7 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #define MASTER_LEFT #ifdef RGBLIGHT_ENABLE - #define RGBLED_NUM 66 // Number of LEDs - #define RGBLIGHT_SPLIT - #define RGBLED_SPLIT { 33, 33 } - #define RGBLIGHT_HUE_STEP 8 - #define RGBLIGHT_SAT_STEP 8 - #define RGBLIGHT_VAL_STEP 8 #define RGBLIGHT_DEFAULT_MODE RGBLIGHT_MODE_RGB_TEST -// #define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */ /*== choose animations ==*/ // #define RGBLIGHT_EFFECT_BREATHING diff --git a/keyboards/rura66/rev1/info.json b/keyboards/rura66/rev1/info.json index e312323c4d..4165a8abec 100644 --- a/keyboards/rura66/rev1/info.json +++ b/keyboards/rura66/rev1/info.json @@ -12,7 +12,11 @@ "driver": "WS2812" }, "rgblight": { - "max_brightness": 120 + "saturation_steps": 8, + "brightness_steps": 8, + "led_count": 66, + "max_brightness": 120, + "split_count": [33, 33] }, "matrix_pins": { "cols": ["F4", "F5", "F6", "F7", "B1", "B3", "B2"], diff --git a/keyboards/ryanbaekr/rb18/config.h b/keyboards/ryanbaekr/rb18/config.h index 835872aed5..e38f0dc862 100644 --- a/keyboards/ryanbaekr/rb18/config.h +++ b/keyboards/ryanbaekr/rb18/config.h @@ -28,7 +28,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #define RGBLIGHT_EFFECT_RGB_TEST #define RGBLIGHT_EFFECT_ALTERNATING #define RGBLIGHT_EFFECT_TWINKLE -#define RGBLED_NUM 3 #define RGBLED_HUE_STEP 8 #define RGBLED_SAT_STEP 8 #define RGBLED_VAL_STEP 8 diff --git a/keyboards/ryanbaekr/rb18/info.json b/keyboards/ryanbaekr/rb18/info.json index 2ee0967486..72135377e2 100644 --- a/keyboards/ryanbaekr/rb18/info.json +++ b/keyboards/ryanbaekr/rb18/info.json @@ -8,6 +8,9 @@ "pid": "0x0018", "device_version": "0.0.3" }, + "rgblight": { + "led_count": 3 + }, "ws2812": { "pin": "B0" }, diff --git a/keyboards/ryanbaekr/rb69/config.h b/keyboards/ryanbaekr/rb69/config.h index 5614dfa100..e9ff04496c 100644 --- a/keyboards/ryanbaekr/rb69/config.h +++ b/keyboards/ryanbaekr/rb69/config.h @@ -28,7 +28,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #define RGBLIGHT_EFFECT_RGB_TEST #define RGBLIGHT_EFFECT_ALTERNATING #define RGBLIGHT_EFFECT_TWINKLE -#define RGBLED_NUM 14 #define RGBLED_HUE_STEP 8 #define RGBLED_SAT_STEP 8 #define RGBLED_VAL_STEP 8 diff --git a/keyboards/ryanbaekr/rb69/info.json b/keyboards/ryanbaekr/rb69/info.json index 0b514a46f6..019dbbe755 100644 --- a/keyboards/ryanbaekr/rb69/info.json +++ b/keyboards/ryanbaekr/rb69/info.json @@ -8,6 +8,9 @@ "pid": "0x0069", "device_version": "0.0.3" }, + "rgblight": { + "led_count": 14 + }, "ws2812": { "pin": "B0" }, @@ -16,8 +19,8 @@ "rows": ["D7", "C6", "D4", "D0", "D1"] }, "diode_direction": "COL2ROW", - "processor": "atmega32u4", - "bootloader": "caterina", + "development_board": "elite_c", + "pin_compatible": "elite_c", "layouts": { "LAYOUT": { "layout": [ diff --git a/keyboards/ryanbaekr/rb86/info.json b/keyboards/ryanbaekr/rb86/info.json index 5c4c3485df..fb4b9a4d21 100644 --- a/keyboards/ryanbaekr/rb86/info.json +++ b/keyboards/ryanbaekr/rb86/info.json @@ -13,8 +13,8 @@ "rows": ["B0", "B1", "B2", "B3", "B4", "D7"] }, "diode_direction": "COL2ROW", - "processor": "atmega32u4", - "bootloader": "caterina", + "development_board": "elite_c", + "pin_compatible": "elite_c", "layout_aliases": { "LAYOUT_numpad_6x17": "LAYOUT" }, diff --git a/keyboards/ryanbaekr/rb87/config.h b/keyboards/ryanbaekr/rb87/config.h index ca1f8284c5..e38f0dc862 100644 --- a/keyboards/ryanbaekr/rb87/config.h +++ b/keyboards/ryanbaekr/rb87/config.h @@ -28,7 +28,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #define RGBLIGHT_EFFECT_RGB_TEST #define RGBLIGHT_EFFECT_ALTERNATING #define RGBLIGHT_EFFECT_TWINKLE -#define RGBLED_NUM 15 #define RGBLED_HUE_STEP 8 #define RGBLED_SAT_STEP 8 #define RGBLED_VAL_STEP 8 diff --git a/keyboards/ryanbaekr/rb87/info.json b/keyboards/ryanbaekr/rb87/info.json index 8741408aaa..b633314bb3 100644 --- a/keyboards/ryanbaekr/rb87/info.json +++ b/keyboards/ryanbaekr/rb87/info.json @@ -3,13 +3,16 @@ "manufacturer": "ryanbaekr", "url": "", "maintainer": "ryanbaekr", - "processor": "atmega32u4", - "bootloader": "caterina", + "development_board": "elite_c", + "pin_compatible": "elite_c", "usb": { "vid": "0x7262", "pid": "0x0087", "device_version": "0.0.3" }, + "rgblight": { + "led_count": 15 + }, "ws2812": { "pin": "B0" }, diff --git a/keyboards/ryloo_studio/m0110/config.h b/keyboards/ryloo_studio/m0110/config.h index 9ed41827d0..bd9da79d60 100755 --- a/keyboards/ryloo_studio/m0110/config.h +++ b/keyboards/ryloo_studio/m0110/config.h @@ -33,7 +33,3 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. # define RGBLIGHT_EFFECT_RGB_TEST # define RGBLIGHT_EFFECT_ALTERNATING # define RGBLIGHT_EFFECT_TWINKLE -# define RGBLED_NUM 18 -# define RGBLIGHT_HUE_STEP 8 -# define RGBLIGHT_SAT_STEP 8 -# define RGBLIGHT_VAL_STEP 8 diff --git a/keyboards/ryloo_studio/m0110/info.json b/keyboards/ryloo_studio/m0110/info.json index cded8206f4..037dce93ae 100644 --- a/keyboards/ryloo_studio/m0110/info.json +++ b/keyboards/ryloo_studio/m0110/info.json @@ -21,6 +21,9 @@ "pin": "E2" }, "rgblight": { + "saturation_steps": 8, + "brightness_steps": 8, + "led_count": 18, "max_brightness": 123 }, "processor": "atmega32u4", diff --git a/keyboards/s_ol/0xc_pad/0xc_pad.c b/keyboards/s_ol/0xc_pad/0xc_pad.c index c471da92cc..ba8cd96aec 100644 --- a/keyboards/s_ol/0xc_pad/0xc_pad.c +++ b/keyboards/s_ol/0xc_pad/0xc_pad.c @@ -13,7 +13,7 @@ * You should have received a copy of the GNU General Public License * along with this program. If not, see <http://www.gnu.org/licenses/>. */ -#include "0xc_pad.h" +#include "quantum.h" #ifdef RGB_MATRIX_ENABLE led_config_t g_led_config = { { diff --git a/keyboards/s_ol/0xc_pad/0xc_pad.h b/keyboards/s_ol/0xc_pad/0xc_pad.h deleted file mode 100644 index 013f4c89dc..0000000000 --- a/keyboards/s_ol/0xc_pad/0xc_pad.h +++ /dev/null @@ -1,24 +0,0 @@ -/* Copyright 2021 s-ol - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see <http://www.gnu.org/licenses/>. - */ -#pragma once - -#include "quantum.h" - -#define LED_LAYOUT( \ - \ - k01, k05, k02, k06, k10, k03, k07, k11, k15, k08, k12, k16) \ - \ - { k01, k02, k03, k08, k07, k06, k05, k10, k11, k12, k16, k15, } diff --git a/keyboards/saevus/cor_tkl/config.h b/keyboards/saevus/cor_tkl/config.h index b42ece99a6..7fedf4dce1 100644 --- a/keyboards/saevus/cor_tkl/config.h +++ b/keyboards/saevus/cor_tkl/config.h @@ -20,5 +20,4 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. /* RGB Matrix setup */ #define RGB_MATRIX_LED_COUNT 2 -#define RGBLED_NUM 2 #define WS2812_PIO_USE_PIO1 // Force the usage of PIO1 peripheral, by default the WS2812 implementation uses the PIO0 peripheral diff --git a/keyboards/salicylic_acid3/7skb/rev1/config.h b/keyboards/salicylic_acid3/7skb/rev1/config.h index 573efb81c7..74be5103a2 100644 --- a/keyboards/salicylic_acid3/7skb/rev1/config.h +++ b/keyboards/salicylic_acid3/7skb/rev1/config.h @@ -25,12 +25,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. /* Locking resynchronize hack */ #define LOCKING_RESYNC_ENABLE -#ifndef RGBLED_NUM - #define RGBLED_NUM 12 - #define RGBLIGHT_SPLIT - #define RGBLED_SPLIT { 6, 6 } -#endif - #define RGBLIGHT_EFFECT_BREATHING #define RGBLIGHT_EFFECT_RAINBOW_MOOD #define RGBLIGHT_EFFECT_RAINBOW_SWIRL @@ -49,8 +43,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #define RGBLIGHT_LIMIT_VAL 50 #define RGBLIGHT_VAL_STEP 4 #endif -#define RGBLIGHT_HUE_STEP 10 -#define RGBLIGHT_SAT_STEP 17 #if defined(RGBLIGHT_ENABLE) && !defined(IOS_DEVICE_ENABLE) // USB_MAX_POWER_CONSUMPTION value for naked48 keyboard diff --git a/keyboards/salicylic_acid3/7skb/rev1/info.json b/keyboards/salicylic_acid3/7skb/rev1/info.json index 12f0b6f424..7b74a1ac34 100644 --- a/keyboards/salicylic_acid3/7skb/rev1/info.json +++ b/keyboards/salicylic_acid3/7skb/rev1/info.json @@ -16,6 +16,11 @@ "split": { "soft_serial_pin": "D2" }, + "rgblight": { + "hue_steps": 10, + "led_count": 12, + "split_count": [6, 6] + }, "ws2812": { "pin": "D3" }, diff --git a/keyboards/salicylic_acid3/7splus/config.h b/keyboards/salicylic_acid3/7splus/config.h index 82eec4a306..501738ca2d 100644 --- a/keyboards/salicylic_acid3/7splus/config.h +++ b/keyboards/salicylic_acid3/7splus/config.h @@ -24,12 +24,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. /* Locking resynchronize hack */ #define LOCKING_RESYNC_ENABLE -#ifndef RGBLED_NUM - #define RGBLED_NUM 31 - #define RGBLIGHT_SPLIT - #define RGBLED_SPLIT { 11, 20 } -#endif - #define RGBLIGHT_EFFECT_BREATHING #define RGBLIGHT_EFFECT_RAINBOW_MOOD #define RGBLIGHT_EFFECT_RAINBOW_SWIRL @@ -48,8 +42,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #define RGBLIGHT_LIMIT_VAL 50 #define RGBLIGHT_VAL_STEP 4 #endif -#define RGBLIGHT_HUE_STEP 10 -#define RGBLIGHT_SAT_STEP 17 #if defined(RGBLIGHT_ENABLE) && !defined(IOS_DEVICE_ENABLE) // USB_MAX_POWER_CONSUMPTION value for naked48 keyboard diff --git a/keyboards/salicylic_acid3/7splus/info.json b/keyboards/salicylic_acid3/7splus/info.json index 524ecc34ea..59c6060c63 100644 --- a/keyboards/salicylic_acid3/7splus/info.json +++ b/keyboards/salicylic_acid3/7splus/info.json @@ -16,6 +16,11 @@ "split": { "soft_serial_pin": "D2" }, + "rgblight": { + "hue_steps": 10, + "led_count": 31, + "split_count": [11, 20] + }, "ws2812": { "pin": "D3" }, diff --git a/keyboards/salicylic_acid3/ergoarrows/config.h b/keyboards/salicylic_acid3/ergoarrows/config.h index dcbdb0f537..a062f906ed 100644 --- a/keyboards/salicylic_acid3/ergoarrows/config.h +++ b/keyboards/salicylic_acid3/ergoarrows/config.h @@ -24,12 +24,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. /* Locking resynchronize hack */ #define LOCKING_RESYNC_ENABLE -#ifndef RGBLED_NUM - #define RGBLED_NUM 86 - #define RGBLIGHT_SPLIT - #define RGBLED_SPLIT { 43, 43 } -#endif - #define RGBLIGHT_EFFECT_BREATHING #define RGBLIGHT_EFFECT_RAINBOW_MOOD #define RGBLIGHT_EFFECT_RAINBOW_SWIRL @@ -48,8 +42,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #define RGBLIGHT_LIMIT_VAL 30 #define RGBLIGHT_VAL_STEP 4 #endif -#define RGBLIGHT_HUE_STEP 10 -#define RGBLIGHT_SAT_STEP 17 #if defined(RGBLIGHT_ENABLE) && !defined(IOS_DEVICE_ENABLE) // USB_MAX_POWER_CONSUMPTION value for naked48 keyboard diff --git a/keyboards/salicylic_acid3/ergoarrows/info.json b/keyboards/salicylic_acid3/ergoarrows/info.json index 1665fce7e8..fabbb4c542 100644 --- a/keyboards/salicylic_acid3/ergoarrows/info.json +++ b/keyboards/salicylic_acid3/ergoarrows/info.json @@ -16,6 +16,11 @@ "split": { "soft_serial_pin": "D0" }, + "rgblight": { + "hue_steps": 10, + "led_count": 86, + "split_count": [43, 43] + }, "ws2812": { "pin": "D3" }, diff --git a/keyboards/salicylic_acid3/getta25/rev1/config.h b/keyboards/salicylic_acid3/getta25/rev1/config.h index cdc803a98c..18c1a03538 100644 --- a/keyboards/salicylic_acid3/getta25/rev1/config.h +++ b/keyboards/salicylic_acid3/getta25/rev1/config.h @@ -23,7 +23,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. /* Locking resynchronize hack */ #define LOCKING_RESYNC_ENABLE -#define RGBLED_NUM 9 // Number of LEDs #define RGBLIGHT_EFFECT_BREATHING #define RGBLIGHT_EFFECT_RAINBOW_MOOD #define RGBLIGHT_EFFECT_RAINBOW_SWIRL @@ -42,8 +41,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #define RGBLIGHT_LIMIT_VAL 50 #define RGBLIGHT_VAL_STEP 4 #endif -#define RGBLIGHT_HUE_STEP 10 -#define RGBLIGHT_SAT_STEP 17 #if defined(RGBLIGHT_ENABLE) && !defined(IOS_DEVICE_ENABLE) // USB_MAX_POWER_CONSUMPTION value for naked48 keyboard diff --git a/keyboards/salicylic_acid3/getta25/rev1/info.json b/keyboards/salicylic_acid3/getta25/rev1/info.json index de9fe887e7..2f58de0c72 100644 --- a/keyboards/salicylic_acid3/getta25/rev1/info.json +++ b/keyboards/salicylic_acid3/getta25/rev1/info.json @@ -8,6 +8,10 @@ "pid": "0x3060", "device_version": "0.1.3" }, + "rgblight": { + "hue_steps": 10, + "led_count": 9 + }, "ws2812": { "pin": "D3" }, diff --git a/keyboards/salicylic_acid3/jisplit89/rev1/config.h b/keyboards/salicylic_acid3/jisplit89/rev1/config.h index 51b6d454e5..2a5c6d27e7 100644 --- a/keyboards/salicylic_acid3/jisplit89/rev1/config.h +++ b/keyboards/salicylic_acid3/jisplit89/rev1/config.h @@ -24,12 +24,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. /* Locking resynchronize hack */ #define LOCKING_RESYNC_ENABLE -#ifndef RGBLED_NUM - #define RGBLED_NUM 32 - #define RGBLIGHT_SPLIT - #define RGBLED_SPLIT { 11, 21 } -#endif - #define RGBLIGHT_EFFECT_BREATHING #define RGBLIGHT_EFFECT_RAINBOW_MOOD #define RGBLIGHT_EFFECT_RAINBOW_SWIRL @@ -48,8 +42,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #define RGBLIGHT_LIMIT_VAL 50 #define RGBLIGHT_VAL_STEP 4 #endif -#define RGBLIGHT_HUE_STEP 10 -#define RGBLIGHT_SAT_STEP 17 #if defined(RGBLIGHT_ENABLE) && !defined(IOS_DEVICE_ENABLE) // USB_MAX_POWER_CONSUMPTION value for naked48 keyboard diff --git a/keyboards/salicylic_acid3/jisplit89/rev1/info.json b/keyboards/salicylic_acid3/jisplit89/rev1/info.json index 63feabb939..a83024ef64 100644 --- a/keyboards/salicylic_acid3/jisplit89/rev1/info.json +++ b/keyboards/salicylic_acid3/jisplit89/rev1/info.json @@ -16,6 +16,11 @@ "split": { "soft_serial_pin": "D2" }, + "rgblight": { + "hue_steps": 10, + "led_count": 32, + "split_count": [11, 21] + }, "ws2812": { "pin": "D3" }, diff --git a/keyboards/salicylic_acid3/nafuda/config.h b/keyboards/salicylic_acid3/nafuda/config.h index 94d44bfce8..5436d668f6 100644 --- a/keyboards/salicylic_acid3/nafuda/config.h +++ b/keyboards/salicylic_acid3/nafuda/config.h @@ -23,7 +23,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. /* Locking resynchronize hack */ #define LOCKING_RESYNC_ENABLE -#define RGBLED_NUM 7 // Number of LEDs #define RGBLIGHT_EFFECT_BREATHING #define RGBLIGHT_EFFECT_RAINBOW_MOOD #define RGBLIGHT_EFFECT_RAINBOW_SWIRL @@ -42,8 +41,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #define RGBLIGHT_LIMIT_VAL 50 #define RGBLIGHT_VAL_STEP 4 #endif -#define RGBLIGHT_HUE_STEP 10 -#define RGBLIGHT_SAT_STEP 17 #if defined(RGBLIGHT_ENABLE) && !defined(IOS_DEVICE_ENABLE) #define USB_MAX_POWER_CONSUMPTION 400 diff --git a/keyboards/salicylic_acid3/nafuda/info.json b/keyboards/salicylic_acid3/nafuda/info.json index ea2645cf23..21b7b6cb5c 100644 --- a/keyboards/salicylic_acid3/nafuda/info.json +++ b/keyboards/salicylic_acid3/nafuda/info.json @@ -8,6 +8,10 @@ "pid": "0x3060", "device_version": "0.1.2" }, + "rgblight": { + "hue_steps": 10, + "led_count": 7 + }, "ws2812": { "pin": "D3" }, diff --git a/keyboards/salicylic_acid3/naked48/rev1/config.h b/keyboards/salicylic_acid3/naked48/rev1/config.h index c7246fad76..30c0e75be4 100644 --- a/keyboards/salicylic_acid3/naked48/rev1/config.h +++ b/keyboards/salicylic_acid3/naked48/rev1/config.h @@ -22,10 +22,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. /* Locking resynchronize hack */ #define LOCKING_RESYNC_ENABLE -#ifndef RGBLED_NUM - #define RGBLED_NUM 48 -#endif - #define RGBLIGHT_EFFECT_BREATHING #define RGBLIGHT_EFFECT_RAINBOW_MOOD #define RGBLIGHT_EFFECT_RAINBOW_SWIRL @@ -38,6 +34,3 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #define RGBLIGHT_EFFECT_TWINKLE #define RGBLIGHT_DEFAULT_VAL 50 - -#define RGBLIGHT_HUE_STEP 10 -#define RGBLIGHT_SAT_STEP 17 diff --git a/keyboards/salicylic_acid3/naked48/rev1/info.json b/keyboards/salicylic_acid3/naked48/rev1/info.json index a378952d25..d1209310c2 100644 --- a/keyboards/salicylic_acid3/naked48/rev1/info.json +++ b/keyboards/salicylic_acid3/naked48/rev1/info.json @@ -25,6 +25,10 @@ } } }, + "rgblight": { + "hue_steps": 10, + "led_count": 48 + }, "ws2812": { "pin": "D3" }, diff --git a/keyboards/salicylic_acid3/naked64/rev1/config.h b/keyboards/salicylic_acid3/naked64/rev1/config.h index 33ee2b5030..56fc1eede0 100644 --- a/keyboards/salicylic_acid3/naked64/rev1/config.h +++ b/keyboards/salicylic_acid3/naked64/rev1/config.h @@ -23,9 +23,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. /* Locking resynchronize hack */ #define LOCKING_RESYNC_ENABLE -#define RGBLED_NUM 12 // Number of LEDs -#define RGBLIGHT_LED_MAP { 0, 1, 3, 2, 2, 3, 2, 3, 4, 5, 6, 7 } - #ifndef IOS_DEVICE_ENABLE #define RGBLIGHT_LIMIT_VAL 180 #define RGBLIGHT_VAL_STEP 17 @@ -33,8 +30,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #define RGBLIGHT_LIMIT_VAL 50 #define RGBLIGHT_VAL_STEP 4 #endif -#define RGBLIGHT_HUE_STEP 10 -#define RGBLIGHT_SAT_STEP 17 // Selection of RGBLIGHT MODE to use. #define RGBLIGHT_EFFECT_BREATHING diff --git a/keyboards/salicylic_acid3/naked64/rev1/info.json b/keyboards/salicylic_acid3/naked64/rev1/info.json index a58acf807b..0ca53c1444 100644 --- a/keyboards/salicylic_acid3/naked64/rev1/info.json +++ b/keyboards/salicylic_acid3/naked64/rev1/info.json @@ -22,6 +22,11 @@ } } }, + "rgblight": { + "hue_steps": 10, + "led_count": 12, + "led_map": [0, 1, 3, 2, 2, 3, 2, 3, 4, 5, 6, 7] + }, "ws2812": { "pin": "B6" }, diff --git a/keyboards/salicylic_acid3/nknl7en/config.h b/keyboards/salicylic_acid3/nknl7en/config.h index 9f39d06f61..d548a9378a 100644 --- a/keyboards/salicylic_acid3/nknl7en/config.h +++ b/keyboards/salicylic_acid3/nknl7en/config.h @@ -24,12 +24,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. /* Locking resynchronize hack */ #define LOCKING_RESYNC_ENABLE -#ifndef RGBLED_NUM - #define RGBLED_NUM 21 - #define RGBLIGHT_SPLIT - #define RGBLED_SPLIT { 9, 12 } -#endif - #define RGBLIGHT_EFFECT_BREATHING #define RGBLIGHT_EFFECT_RAINBOW_MOOD #define RGBLIGHT_EFFECT_RAINBOW_SWIRL @@ -48,8 +42,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #define RGBLIGHT_LIMIT_VAL 50 #define RGBLIGHT_VAL_STEP 4 #endif -#define RGBLIGHT_HUE_STEP 10 -#define RGBLIGHT_SAT_STEP 17 #if defined(RGBLIGHT_ENABLE) && !defined(IOS_DEVICE_ENABLE) // USB_MAX_POWER_CONSUMPTION value for naked48 keyboard diff --git a/keyboards/salicylic_acid3/nknl7en/info.json b/keyboards/salicylic_acid3/nknl7en/info.json index f0f45f077a..2499586479 100644 --- a/keyboards/salicylic_acid3/nknl7en/info.json +++ b/keyboards/salicylic_acid3/nknl7en/info.json @@ -16,6 +16,11 @@ "split": { "soft_serial_pin": "D0" }, + "rgblight": { + "hue_steps": 10, + "led_count": 21, + "split_count": [9, 12] + }, "ws2812": { "pin": "D3" }, diff --git a/keyboards/salicylic_acid3/nknl7jp/config.h b/keyboards/salicylic_acid3/nknl7jp/config.h index 65091cadc0..d548a9378a 100644 --- a/keyboards/salicylic_acid3/nknl7jp/config.h +++ b/keyboards/salicylic_acid3/nknl7jp/config.h @@ -24,12 +24,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. /* Locking resynchronize hack */ #define LOCKING_RESYNC_ENABLE -#ifndef RGBLED_NUM - #define RGBLED_NUM 20 - #define RGBLIGHT_SPLIT - #define RGBLED_SPLIT { 9, 11 } -#endif - #define RGBLIGHT_EFFECT_BREATHING #define RGBLIGHT_EFFECT_RAINBOW_MOOD #define RGBLIGHT_EFFECT_RAINBOW_SWIRL @@ -48,8 +42,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #define RGBLIGHT_LIMIT_VAL 50 #define RGBLIGHT_VAL_STEP 4 #endif -#define RGBLIGHT_HUE_STEP 10 -#define RGBLIGHT_SAT_STEP 17 #if defined(RGBLIGHT_ENABLE) && !defined(IOS_DEVICE_ENABLE) // USB_MAX_POWER_CONSUMPTION value for naked48 keyboard diff --git a/keyboards/salicylic_acid3/nknl7jp/info.json b/keyboards/salicylic_acid3/nknl7jp/info.json index 5713ad9084..b3ddda0067 100644 --- a/keyboards/salicylic_acid3/nknl7jp/info.json +++ b/keyboards/salicylic_acid3/nknl7jp/info.json @@ -16,6 +16,11 @@ "split": { "soft_serial_pin": "D0" }, + "rgblight": { + "hue_steps": 10, + "led_count": 20, + "split_count": [9, 11] + }, "ws2812": { "pin": "D3" }, diff --git a/keyboards/salicylic_acid3/setta21/keymaps/salicylic/keymap.c b/keyboards/salicylic_acid3/setta21/keymaps/salicylic/keymap.c index e117d26eee..b7cde4d4e0 100644 --- a/keyboards/salicylic_acid3/setta21/keymaps/salicylic/keymap.c +++ b/keyboards/salicylic_acid3/setta21/keymaps/salicylic/keymap.c @@ -173,8 +173,8 @@ void render_layer_state(void) { oled_write_P(PSTR(" Macro "), layer_state_is(_MACRO)); } -void render_keylock_status(uint8_t led_usb_state) { - oled_write_P(PSTR("NumLock"), led_usb_state & (1 << USB_LED_NUM_LOCK)); +void render_keylock_status(led_t led_state) { + oled_write_P(PSTR("NumLock"), led_state.num_lock); oled_write_P(PSTR(" "), false); } @@ -186,7 +186,7 @@ void render_layer_messages(void) { void render_status(void) { /* Show Keyboard Layout */ render_layer_messages(); - render_keylock_status(host_keyboard_leds()); + render_keylock_status(host_keyboard_led_state()); render_layer_state(); } diff --git a/keyboards/salicylic_acid3/setta21/rev1/config.h b/keyboards/salicylic_acid3/setta21/rev1/config.h index eb9e0b5b1d..5436d668f6 100644 --- a/keyboards/salicylic_acid3/setta21/rev1/config.h +++ b/keyboards/salicylic_acid3/setta21/rev1/config.h @@ -23,7 +23,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. /* Locking resynchronize hack */ #define LOCKING_RESYNC_ENABLE -#define RGBLED_NUM 21 // Number of LEDs #define RGBLIGHT_EFFECT_BREATHING #define RGBLIGHT_EFFECT_RAINBOW_MOOD #define RGBLIGHT_EFFECT_RAINBOW_SWIRL @@ -42,8 +41,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #define RGBLIGHT_LIMIT_VAL 50 #define RGBLIGHT_VAL_STEP 4 #endif -#define RGBLIGHT_HUE_STEP 10 -#define RGBLIGHT_SAT_STEP 17 #if defined(RGBLIGHT_ENABLE) && !defined(IOS_DEVICE_ENABLE) #define USB_MAX_POWER_CONSUMPTION 400 diff --git a/keyboards/salicylic_acid3/setta21/rev1/info.json b/keyboards/salicylic_acid3/setta21/rev1/info.json index 642bde6298..af491489d5 100644 --- a/keyboards/salicylic_acid3/setta21/rev1/info.json +++ b/keyboards/salicylic_acid3/setta21/rev1/info.json @@ -8,6 +8,10 @@ "pid": "0x3060", "device_version": "0.1.1" }, + "rgblight": { + "hue_steps": 10, + "led_count": 21 + }, "ws2812": { "pin": "D3" }, diff --git a/keyboards/sam/s80/config.h b/keyboards/sam/s80/config.h deleted file mode 100644 index 4c3d6ae504..0000000000 --- a/keyboards/sam/s80/config.h +++ /dev/null @@ -1,26 +0,0 @@ -/* Copyright 2020 CMM。Studio Freather - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see <http://www.gnu.org/licenses/>. - */ - -#pragma once - -# define RGBLED_NUM 20 -# define RGBLIGHT_HUE_STEP 8 -# define RGBLIGHT_SAT_STEP 8 -# define RGBLIGHT_VAL_STEP 8 -//# define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */ - -// generated by KBFirmware JSON to QMK Parser -// https://noroadsleft.github.io/kbf_qmk_converter/ diff --git a/keyboards/sam/s80/info.json b/keyboards/sam/s80/info.json index 73794ba3eb..3949a2680a 100644 --- a/keyboards/sam/s80/info.json +++ b/keyboards/sam/s80/info.json @@ -20,6 +20,9 @@ "pin": "E2" }, "rgblight": { + "saturation_steps": 8, + "brightness_steps": 8, + "led_count": 20, "max_brightness": 100 }, "processor": "atmega32u4", diff --git a/keyboards/sam/sg81m/config.h b/keyboards/sam/sg81m/config.h index b999af6eec..f8165d9514 100644 --- a/keyboards/sam/sg81m/config.h +++ b/keyboards/sam/sg81m/config.h @@ -16,11 +16,6 @@ #pragma once - #define RGBLED_NUM 10 - #define RGBLIGHT_HUE_STEP 8 - #define RGBLIGHT_SAT_STEP 8 - #define RGBLIGHT_VAL_STEP 8 - #define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */ #define RGBLIGHT_EFFECT_BREATHING #define RGBLIGHT_EFFECT_RAINBOW_MOOD #define RGBLIGHT_EFFECT_RAINBOW_SWIRL diff --git a/keyboards/sam/sg81m/info.json b/keyboards/sam/sg81m/info.json index baa1cec9a7..3fa4da7e5c 100644 --- a/keyboards/sam/sg81m/info.json +++ b/keyboards/sam/sg81m/info.json @@ -16,6 +16,12 @@ "indicators": { "caps_lock": "B0" }, + "rgblight": { + "saturation_steps": 8, + "brightness_steps": 8, + "led_count": 10, + "sleep": true + }, "ws2812": { "pin": "E6" }, diff --git a/keyboards/satt/comet46/lib/host_led_state_reader.c b/keyboards/satt/comet46/lib/host_led_state_reader.c index 758fc4c1dc..e9910e0141 100644 --- a/keyboards/satt/comet46/lib/host_led_state_reader.c +++ b/keyboards/satt/comet46/lib/host_led_state_reader.c @@ -4,12 +4,12 @@ char host_led_state_str[22]; const char *read_host_led_state(void) { - uint8_t leds = host_keyboard_leds(); + led_t led_state = host_keyboard_led_state(); snprintf(host_led_state_str, sizeof(host_led_state_str), "Lock: %s%s%s", - (leds & (1 << USB_LED_CAPS_LOCK)) ? "CAPL " : "", - (leds & (1 << USB_LED_SCROLL_LOCK)) ? "SCRL " : "", - (leds & (1 << USB_LED_NUM_LOCK)) ? "NUML" : ""); + led_state.caps_lock ? "CAPL " : "", + led_state.scroll_lock ? "SCRL " : "", + led_state.num_lock ? "NUML" : ""); return host_led_state_str; } diff --git a/keyboards/satt/vision/rules.mk b/keyboards/satt/vision/rules.mk index 0aeca0dd9f..7f4f202a1b 100644 --- a/keyboards/satt/vision/rules.mk +++ b/keyboards/satt/vision/rules.mk @@ -11,5 +11,3 @@ BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow AUDIO_ENABLE = no # Audio output -# Enter lower-power sleep mode when on the ChibiOS idle thread -OPT_DEFS += -DCORTEX_ENABLE_WFI_IDLE=TRUE diff --git a/keyboards/sauce/mild/rules.mk b/keyboards/sauce/mild/rules.mk index eed469b44e..ca4d384584 100644 --- a/keyboards/sauce/mild/rules.mk +++ b/keyboards/sauce/mild/rules.mk @@ -11,5 +11,3 @@ BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow AUDIO_ENABLE = no # Audio output -# Enter lower-power sleep mode when on the ChibiOS idle thread -OPT_DEFS += -DCORTEX_ENABLE_WFI_IDLE=TRUE diff --git a/keyboards/sawnsprojects/amber80/solder/config.h b/keyboards/sawnsprojects/amber80/solder/config.h index b47e1efd74..17220860b4 100644 --- a/keyboards/sawnsprojects/amber80/solder/config.h +++ b/keyboards/sawnsprojects/amber80/solder/config.h @@ -17,11 +17,6 @@ #pragma once /* RGB */ - #define RGBLED_NUM 22 - #define RGBLIGHT_HUE_STEP 8 - #define RGBLIGHT_SAT_STEP 8 - #define RGBLIGHT_VAL_STEP 8 - #define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */ // /*== or choose animations ==*/ #define RGBLIGHT_EFFECT_BREATHING #define RGBLIGHT_EFFECT_RAINBOW_MOOD diff --git a/keyboards/sawnsprojects/amber80/solder/info.json b/keyboards/sawnsprojects/amber80/solder/info.json index 9fe412c3cd..8bb41b0731 100644 --- a/keyboards/sawnsprojects/amber80/solder/info.json +++ b/keyboards/sawnsprojects/amber80/solder/info.json @@ -18,6 +18,12 @@ "scroll_lock": "B0", "on_state": 0 }, + "rgblight": { + "saturation_steps": 8, + "brightness_steps": 8, + "led_count": 22, + "sleep": true + }, "ws2812": { "pin": "D2" }, diff --git a/keyboards/sawnsprojects/krush/krush60/solder/config.h b/keyboards/sawnsprojects/krush/krush60/solder/config.h index 9cdc6354ec..a1c767be61 100644 --- a/keyboards/sawnsprojects/krush/krush60/solder/config.h +++ b/keyboards/sawnsprojects/krush/krush60/solder/config.h @@ -16,11 +16,6 @@ #pragma once - #define RGBLED_NUM 20 - #define RGBLIGHT_HUE_STEP 8 - #define RGBLIGHT_SAT_STEP 8 - #define RGBLIGHT_VAL_STEP 8 - #define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */ /*== all animations enable ==*/ #define RGBLIGHT_EFFECT_BREATHING #define RGBLIGHT_EFFECT_RAINBOW_MOOD diff --git a/keyboards/sawnsprojects/krush/krush60/solder/info.json b/keyboards/sawnsprojects/krush/krush60/solder/info.json index 2cdecaaeb4..40addc5f36 100644 --- a/keyboards/sawnsprojects/krush/krush60/solder/info.json +++ b/keyboards/sawnsprojects/krush/krush60/solder/info.json @@ -21,7 +21,11 @@ "pin": "F1" }, "rgblight": { - "max_brightness": 200 + "saturation_steps": 8, + "brightness_steps": 8, + "led_count": 20, + "max_brightness": 200, + "sleep": true }, "processor": "atmega32u4", "bootloader": "atmel-dfu", diff --git a/keyboards/sawnsprojects/krush/krush65/hotswap/config.h b/keyboards/sawnsprojects/krush/krush65/hotswap/config.h index 380a50edbe..54868685fc 100644 --- a/keyboards/sawnsprojects/krush/krush65/hotswap/config.h +++ b/keyboards/sawnsprojects/krush/krush65/hotswap/config.h @@ -16,17 +16,7 @@ #pragma once -/* Encoders */ - -#define ENCODERS_CW_KEY { { 12, 3 } } -#define ENCODERS_CCW_KEY { { 12, 4 } } - /* RGB */ - #define RGBLED_NUM 20 - #define RGBLIGHT_HUE_STEP 8 - #define RGBLIGHT_SAT_STEP 8 - #define RGBLIGHT_VAL_STEP 8 - #define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */ /*== all animations enable ==*/ #define RGBLIGHT_EFFECT_BREATHING #define RGBLIGHT_EFFECT_RAINBOW_MOOD diff --git a/keyboards/sawnsprojects/krush/krush65/hotswap/encoder_actions.c b/keyboards/sawnsprojects/krush/krush65/hotswap/encoder_actions.c deleted file mode 100644 index 96fcc9a614..0000000000 --- a/keyboards/sawnsprojects/krush/krush65/hotswap/encoder_actions.c +++ /dev/null @@ -1,53 +0,0 @@ -/* Copyright 2020 Neil Brian Ramirez - * Copyright 2021 drashna jael're (@drashna) - * Copyright 2021 uybv - * Copyright 2021 SawnsProjects - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 3 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see <http://www.gnu.org/licenses/>. - */ - -#include "encoder_actions.h" - -#ifdef ENCODER_ENABLE -static uint8_t encoder_state[NUM_ENCODERS] = {0}; -static keypos_t encoder_cw[NUM_ENCODERS] = ENCODERS_CW_KEY; -static keypos_t encoder_ccw[NUM_ENCODERS] = ENCODERS_CCW_KEY; - -void encoder_action_unregister(void) { - for (int index = 0; index < NUM_ENCODERS; ++index) { - if (encoder_state[index]) { - keyevent_t encoder_event = (keyevent_t) { - .key = encoder_state[index] >> 1 ? encoder_cw[index] : encoder_ccw[index], - .pressed = false, - .time = timer_read(), - .type = KEY_EVENT - }; - encoder_state[index] = 0; - action_exec(encoder_event); - } - } -} - -void encoder_action_register(uint8_t index, bool clockwise) { - keyevent_t encoder_event = (keyevent_t) { - .key = clockwise ? encoder_cw[index] : encoder_ccw[index], - .pressed = true, - .time = timer_read(), - .type = KEY_EVENT - }; - encoder_state[index] = (clockwise ^ 1) | (clockwise << 1); - action_exec(encoder_event); -} - -#endif diff --git a/keyboards/sawnsprojects/krush/krush65/hotswap/encoder_actions.h b/keyboards/sawnsprojects/krush/krush65/hotswap/encoder_actions.h deleted file mode 100644 index fb22632632..0000000000 --- a/keyboards/sawnsprojects/krush/krush65/hotswap/encoder_actions.h +++ /dev/null @@ -1,23 +0,0 @@ -/* Copyright 2020 Neil Brian Ramirez - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 3 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see <http://www.gnu.org/licenses/>. - */ - -#pragma once - -#include "quantum.h" - -void encoder_action_unregister(void); - -void encoder_action_register(uint8_t index, bool clockwise);
\ No newline at end of file diff --git a/keyboards/sawnsprojects/krush/krush65/hotswap/hotswap.h b/keyboards/sawnsprojects/krush/krush65/hotswap/hotswap.h deleted file mode 100644 index 5f25d9c5c3..0000000000 --- a/keyboards/sawnsprojects/krush/krush65/hotswap/hotswap.h +++ /dev/null @@ -1,20 +0,0 @@ -/* Copyright 2021 SawnsProjects - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see <http://www.gnu.org/licenses/>. - */ - -#pragma once - -#include "quantum.h" -#include "encoder_actions.h" diff --git a/keyboards/sawnsprojects/krush/krush65/hotswap/info.json b/keyboards/sawnsprojects/krush/krush65/hotswap/info.json index 4cec48d86e..4552519533 100644 --- a/keyboards/sawnsprojects/krush/krush65/hotswap/info.json +++ b/keyboards/sawnsprojects/krush/krush65/hotswap/info.json @@ -26,12 +26,16 @@ "pin": "E6" }, "rgblight": { - "max_brightness": 200 + "saturation_steps": 8, + "brightness_steps": 8, + "led_count": 20, + "max_brightness": 200, + "sleep": true }, "processor": "atmega32u4", "bootloader": "atmel-dfu", "layouts": { - "LAYOUT_all": { + "LAYOUT": { "layout": [ {"matrix": [0, 0], "x": 0, "y": 0}, {"matrix": [0, 1], "x": 1, "y": 0}, @@ -109,88 +113,6 @@ {"matrix": [4, 14], "x": 14, "y": 4}, {"matrix": [4, 15], "x": 15, "y": 4} ] - }, - "LAYOUT_via_rotary": { - "layout": [ - {"matrix": [0, 0], "x": 0, "y": 0.75}, - {"matrix": [0, 1], "x": 1, "y": 0.75}, - {"matrix": [0, 2], "x": 2, "y": 0.75}, - {"matrix": [0, 3], "x": 3, "y": 0.75}, - {"matrix": [0, 4], "x": 4, "y": 0.75}, - {"matrix": [0, 5], "x": 5, "y": 0.75}, - {"matrix": [0, 6], "x": 6, "y": 0.75}, - {"matrix": [0, 7], "x": 7, "y": 0.75}, - {"matrix": [0, 8], "x": 8, "y": 0.75}, - {"matrix": [0, 9], "x": 9, "y": 0.75}, - {"matrix": [0, 10], "x": 10, "y": 0.75}, - {"matrix": [0, 11], "x": 11, "y": 0.75}, - {"matrix": [0, 12], "x": 12, "y": 0.75}, - {"matrix": [0, 13], "x": 13, "y": 0.75}, - {"matrix": [0, 14], "x": 14, "y": 0.75}, - {"matrix": [0, 15], "x": 15, "y": 0.75}, - - {"matrix": [3, 12], "x": 14.75, "y": 0, "w": 0.75, "h": 0.75}, - {"matrix": [4, 12], "x": 15.5, "y": 0, "w": 0.75, "h": 0.75}, - - {"matrix": [1, 0], "x": 0, "y": 1.75, "w": 1.5}, - {"matrix": [1, 1], "x": 1.5, "y": 1.75}, - {"matrix": [1, 2], "x": 2.5, "y": 1.75}, - {"matrix": [1, 3], "x": 3.5, "y": 1.75}, - {"matrix": [1, 4], "x": 4.5, "y": 1.75}, - {"matrix": [1, 5], "x": 5.5, "y": 1.75}, - {"matrix": [1, 6], "x": 6.5, "y": 1.75}, - {"matrix": [1, 7], "x": 7.5, "y": 1.75}, - {"matrix": [1, 8], "x": 8.5, "y": 1.75}, - {"matrix": [1, 9], "x": 9.5, "y": 1.75}, - {"matrix": [1, 10], "x": 10.5, "y": 1.75}, - {"matrix": [1, 11], "x": 11.5, "y": 1.75}, - {"matrix": [1, 12], "x": 12.5, "y": 1.75}, - {"matrix": [1, 13], "x": 13.5, "y": 1.75, "w": 1.5}, - {"matrix": [1, 15], "x": 15, "y": 1.75}, - - {"matrix": [2, 0], "x": 0, "y": 2.75, "w": 1.75}, - {"matrix": [2, 1], "x": 1.75, "y": 2.75}, - {"matrix": [2, 2], "x": 2.75, "y": 2.75}, - {"matrix": [2, 3], "x": 3.75, "y": 2.75}, - {"matrix": [2, 4], "x": 4.75, "y": 2.75}, - {"matrix": [2, 5], "x": 5.75, "y": 2.75}, - {"matrix": [2, 6], "x": 6.75, "y": 2.75}, - {"matrix": [2, 7], "x": 7.75, "y": 2.75}, - {"matrix": [2, 8], "x": 8.75, "y": 2.75}, - {"matrix": [2, 9], "x": 9.75, "y": 2.75}, - {"matrix": [2, 10], "x": 10.75, "y": 2.75}, - {"matrix": [2, 11], "x": 11.75, "y": 2.75}, - {"matrix": [2, 13], "x": 12.75, "y": 2.75, "w": 2.25}, - {"matrix": [2, 15], "x": 15, "y": 2.75}, - - {"matrix": [3, 0], "x": 0, "y": 3.75, "w": 2.25}, - {"matrix": [3, 2], "x": 2.25, "y": 3.75}, - {"matrix": [3, 3], "x": 3.25, "y": 3.75}, - {"matrix": [3, 4], "x": 4.25, "y": 3.75}, - {"matrix": [3, 5], "x": 5.25, "y": 3.75}, - {"matrix": [3, 6], "x": 6.25, "y": 3.75}, - {"matrix": [3, 7], "x": 7.25, "y": 3.75}, - {"matrix": [3, 8], "x": 8.25, "y": 3.75}, - {"matrix": [3, 9], "x": 9.25, "y": 3.75}, - {"matrix": [3, 10], "x": 10.25, "y": 3.75}, - {"matrix": [3, 11], "x": 11.25, "y": 3.75}, - {"matrix": [3, 13], "x": 12.25, "y": 3.75, "w": 1.75}, - {"matrix": [3, 14], "x": 14, "y": 3.75}, - {"matrix": [3, 15], "x": 15, "y": 3.75}, - - {"matrix": [4, 0], "x": 0, "y": 4.75, "w": 1.25}, - {"matrix": [4, 2], "x": 1.25, "y": 4.75, "w": 1.25}, - {"matrix": [4, 3], "x": 2.5, "y": 4.75, "w": 1.25}, - {"matrix": [4, 5], "x": 3.75, "y": 4.75, "w": 2.25}, - {"matrix": [4, 6], "x": 6, "y": 4.75, "w": 1.25}, - {"matrix": [4, 7], "x": 7.25, "y": 4.75, "w": 2.75}, - {"matrix": [4, 8], "x": 10, "y": 4.75, "w": 1.25}, - {"matrix": [4, 11], "x": 11.25, "y": 4.75, "w": 1.25}, - - {"matrix": [4, 13], "x": 13, "y": 4.75}, - {"matrix": [4, 14], "x": 14, "y": 4.75}, - {"matrix": [4, 15], "x": 15, "y": 4.75} - ] } } } diff --git a/keyboards/sawnsprojects/krush/krush65/hotswap/keymaps/default/keymap.c b/keyboards/sawnsprojects/krush/krush65/hotswap/keymaps/default/keymap.c index 13883d07e4..8487c555ba 100644 --- a/keyboards/sawnsprojects/krush/krush65/hotswap/keymaps/default/keymap.c +++ b/keyboards/sawnsprojects/krush/krush65/hotswap/keymaps/default/keymap.c @@ -19,7 +19,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { - [0] = LAYOUT_all( + [0] = LAYOUT( KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_GRV, KC_PSCR, KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_DEL, KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, KC_PGUP, @@ -27,7 +27,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_SPC, KC_SPC, MO(1), KC_RCTL, KC_LEFT, KC_DOWN, KC_RGHT ), - [1] = LAYOUT_all( + [1] = LAYOUT( KC_TRNS, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, diff --git a/keyboards/sawnsprojects/krush/krush65/hotswap/keymaps/via/keymap.c b/keyboards/sawnsprojects/krush/krush65/hotswap/keymaps/via/keymap.c index d55eb74fb0..7d239cc523 100644 --- a/keyboards/sawnsprojects/krush/krush65/hotswap/keymaps/via/keymap.c +++ b/keyboards/sawnsprojects/krush/krush65/hotswap/keymaps/via/keymap.c @@ -19,42 +19,42 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { - [0] = LAYOUT_via_rotary( - KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_GRV, KC_PSCR, KC_VOLD ,KC_VOLU, - KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_DEL, - KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, KC_PGUP, - KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_LSFT, KC_UP, KC_PGDN, - KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_SPC, KC_SPC, MO(1), KC_RCTL, KC_LEFT, KC_DOWN, KC_RGHT + [0] = LAYOUT( + KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_GRV, KC_PSCR, + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_DEL, + KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, KC_PGUP, + KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_LSFT, KC_UP, KC_PGDN, + KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_SPC, KC_SPC, MO(1), KC_RCTL, KC_LEFT, KC_DOWN, KC_RGHT ), - [1] = LAYOUT_via_rotary( - KC_TRNS, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS + [1] = LAYOUT( + KC_TRNS, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS ), - [2] = LAYOUT_via_rotary( - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS + [2] = LAYOUT( + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS ), - [3] = LAYOUT_via_rotary( - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS + [3] = LAYOUT( + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS ), }; - -void matrix_scan_user(void) { - encoder_action_unregister(); -} -bool encoder_update_user(uint8_t index, bool clockwise) { - encoder_action_register(index, clockwise); - return false; // override kb default behavior -};
\ No newline at end of file +#ifdef ENCODER_MAP_ENABLE +const uint16_t PROGMEM encoder_map[][NUM_ENCODERS][NUM_DIRECTIONS] = { + [0] = { ENCODER_CCW_CW(KC_VOLD, KC_VOLU) }, + [1] = { ENCODER_CCW_CW(_______, _______) }, + [2] = { ENCODER_CCW_CW(_______, _______) }, + [3] = { ENCODER_CCW_CW(_______, _______) }, +}; +#endif diff --git a/keyboards/sawnsprojects/krush/krush65/hotswap/keymaps/via/rules.mk b/keyboards/sawnsprojects/krush/krush65/hotswap/keymaps/via/rules.mk index a9739430b9..1189f4ad19 100644 --- a/keyboards/sawnsprojects/krush/krush65/hotswap/keymaps/via/rules.mk +++ b/keyboards/sawnsprojects/krush/krush65/hotswap/keymaps/via/rules.mk @@ -1,5 +1,3 @@ VIA_ENABLE = yes LTO_ENABLE = yes - -# Added encoder Action -SRC += encoder_actions.c
\ No newline at end of file +ENCODER_MAP_ENABLE = yes diff --git a/keyboards/sawnsprojects/krush/krush65/solder/config.h b/keyboards/sawnsprojects/krush/krush65/solder/config.h index c5b074931d..8f8bbbde84 100644 --- a/keyboards/sawnsprojects/krush/krush65/solder/config.h +++ b/keyboards/sawnsprojects/krush/krush65/solder/config.h @@ -16,11 +16,6 @@ #pragma once - #define RGBLED_NUM 20 - #define RGBLIGHT_HUE_STEP 8 - #define RGBLIGHT_SAT_STEP 8 - #define RGBLIGHT_VAL_STEP 8 - #define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */ /*== all animations enable ==*/ #define RGBLIGHT_EFFECT_BREATHING #define RGBLIGHT_EFFECT_RAINBOW_MOOD diff --git a/keyboards/sawnsprojects/krush/krush65/solder/info.json b/keyboards/sawnsprojects/krush/krush65/solder/info.json index bd84e19a0e..42dbc0060d 100644 --- a/keyboards/sawnsprojects/krush/krush65/solder/info.json +++ b/keyboards/sawnsprojects/krush/krush65/solder/info.json @@ -26,7 +26,11 @@ "pin": "F1" }, "rgblight": { - "max_brightness": 200 + "saturation_steps": 8, + "brightness_steps": 8, + "led_count": 20, + "max_brightness": 200, + "sleep": true }, "processor": "atmega32u4", "bootloader": "atmel-dfu", diff --git a/keyboards/sawnsprojects/satxri6key/config.h b/keyboards/sawnsprojects/satxri6key/config.h index b7b3436051..76bf7bffcc 100644 --- a/keyboards/sawnsprojects/satxri6key/config.h +++ b/keyboards/sawnsprojects/satxri6key/config.h @@ -16,11 +16,6 @@ #pragma once - #define RGBLED_NUM 6 - #define RGBLIGHT_HUE_STEP 8 - #define RGBLIGHT_SAT_STEP 8 - #define RGBLIGHT_VAL_STEP 8 - #define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */ #define RGBLIGHT_EFFECT_BREATHING #define RGBLIGHT_EFFECT_RAINBOW_MOOD #define RGBLIGHT_EFFECT_RAINBOW_SWIRL diff --git a/keyboards/sawnsprojects/satxri6key/info.json b/keyboards/sawnsprojects/satxri6key/info.json index 642f813a67..b9047bed4b 100644 --- a/keyboards/sawnsprojects/satxri6key/info.json +++ b/keyboards/sawnsprojects/satxri6key/info.json @@ -8,6 +8,12 @@ "pid": "0x0727", "device_version": "0.0.1" }, + "rgblight": { + "saturation_steps": 8, + "brightness_steps": 8, + "led_count": 6, + "sleep": true + }, "ws2812": { "pin": "F0" }, diff --git a/keyboards/sawnsprojects/vcl65/solder/config.h b/keyboards/sawnsprojects/vcl65/solder/config.h index 4fd203480c..a1c767be61 100644 --- a/keyboards/sawnsprojects/vcl65/solder/config.h +++ b/keyboards/sawnsprojects/vcl65/solder/config.h @@ -16,12 +16,6 @@ #pragma once - #define RGBLED_NUM 20 - #define RGBLIGHT_HUE_STEP 8 - #define RGBLIGHT_SAT_STEP 8 - #define RGBLIGHT_VAL_STEP 8 - #define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */ -/*== all animations enable ==*/ /*== all animations enable ==*/ #define RGBLIGHT_EFFECT_BREATHING #define RGBLIGHT_EFFECT_RAINBOW_MOOD diff --git a/keyboards/sawnsprojects/vcl65/solder/info.json b/keyboards/sawnsprojects/vcl65/solder/info.json index 47b141ad4e..1473cb5132 100644 --- a/keyboards/sawnsprojects/vcl65/solder/info.json +++ b/keyboards/sawnsprojects/vcl65/solder/info.json @@ -21,7 +21,11 @@ "pin": "B7" }, "rgblight": { - "max_brightness": 200 + "saturation_steps": 8, + "brightness_steps": 8, + "led_count": 20, + "max_brightness": 200, + "sleep": true }, "processor": "atmega32u4", "bootloader": "atmel-dfu", diff --git a/keyboards/sck/gtm/config.h b/keyboards/sck/gtm/config.h index c95d84b30d..9ae2a01bd5 100644 --- a/keyboards/sck/gtm/config.h +++ b/keyboards/sck/gtm/config.h @@ -18,5 +18,4 @@ #define RGBLIGHT_EFFECT_RGB_TEST #define RGBLIGHT_EFFECT_ALTERNATING #define RGBLIGHT_EFFECT_TWINKLE -#define RGBLED_NUM 4 #endif diff --git a/keyboards/sck/gtm/info.json b/keyboards/sck/gtm/info.json index 422fb0c0f1..3fc2bcc54d 100644 --- a/keyboards/sck/gtm/info.json +++ b/keyboards/sck/gtm/info.json @@ -8,6 +8,9 @@ "pid": "0x6090", "device_version": "0.0.2" }, + "rgblight": { + "led_count": 4 + }, "ws2812": { "pin": "B0" }, diff --git a/keyboards/sck/osa/config.h b/keyboards/sck/osa/config.h deleted file mode 100644 index cc6739122e..0000000000 --- a/keyboards/sck/osa/config.h +++ /dev/null @@ -1,40 +0,0 @@ -/* -Copyright 2019 jrfhoutx - -This program is free software: you can redistribute it and/or modify -it under the terms of the GNU General Public License as published by -the Free Software Foundation, either version 2 of the License, or -(at your option) any later version. - -This program is distributed in the hope that it will be useful, -but WITHOUT ANY WARRANTY; without even the implied warranty of -MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -GNU General Public License for more details. - -You should have received a copy of the GNU General Public License -along with this program. If not, see <http://www.gnu.org/licenses/>. -*/ - -#pragma once - - #define RGBLED_NUM 9 - #define RGBLIGHT_HUE_STEP 10 - #define RGBLIGHT_SAT_STEP 17 - #define RGBLIGHT_VAL_STEP 17 - #define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */ - -/* - * Feature disable options - * These options are also useful to firmware size reduction. - */ - -/* disable debug print */ -//#define NO_DEBUG - -/* disable print */ -//#define NO_PRINT - -/* disable action features */ -//#define NO_ACTION_LAYER -//#define NO_ACTION_TAPPING -//#define NO_ACTION_ONESHOT diff --git a/keyboards/sck/osa/info.json b/keyboards/sck/osa/info.json index ae63add062..823b94f477 100644 --- a/keyboards/sck/osa/info.json +++ b/keyboards/sck/osa/info.json @@ -18,6 +18,11 @@ "num_lock": "C7", "scroll_lock": "B6" }, + "rgblight": { + "hue_steps": 10, + "led_count": 9, + "sleep": true + }, "ws2812": { "pin": "D4" }, diff --git a/keyboards/sck/osa/keymaps/ocm/keymap.c b/keyboards/sck/osa/keymaps/ocm/keymap.c index cd48b57291..87544b7375 100644 --- a/keyboards/sck/osa/keymaps/ocm/keymap.c +++ b/keyboards/sck/osa/keymaps/ocm/keymap.c @@ -15,13 +15,6 @@ */ #include QMK_KEYBOARD_H -// Defines the keycodes used by our macros in process_record_user -//enum custom_keycodes { -// QMKBEST = SAFE_RANGE, -// QMKURL -//}; - - const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { /* Keymap BASE: (Base Layer) Default Layer * .----.,----------------------------------------------------------------------. @@ -84,40 +77,3 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { KC_LCTL, KC_LALT, KC_SPC, MO(1), KC_SPC, KC_RALT, KC_RCTL ), }; - - - - -//bool process_record_user(uint16_t keycode, keyrecord_t *record) { -// switch (keycode) { -// case QMKBEST: -// if (record->event.pressed) { -// // when keycode QMKBEST is pressed -// SEND_STRING("QMK is the best thing ever!"); -// } else { -// // when keycode QMKBEST is released -// } -// break; -// case QMKURL: -// if (record->event.pressed) { -// // when keycode QMKURL is pressed -// SEND_STRING("https://qmk.fm/" SS_TAP(X_ENTER)); -// } else { -// // when keycode QMKURL is released -// } -// break; -// } -// return true; -//} - -void matrix_init_user(void) { - -} - -void matrix_scan_user(void) { - -} - -void led_set_user(uint8_t usb_led) { - -} diff --git a/keyboards/sck/osa/keymaps/splitbs/keymap.c b/keyboards/sck/osa/keymaps/splitbs/keymap.c index 528e45329b..367e084443 100644 --- a/keyboards/sck/osa/keymaps/splitbs/keymap.c +++ b/keyboards/sck/osa/keymaps/splitbs/keymap.c @@ -15,13 +15,6 @@ */ #include QMK_KEYBOARD_H -// Defines the keycodes used by our macros in process_record_user -//enum custom_keycodes { -// QMKBEST = SAFE_RANGE, -// QMKURL -//}; - - const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { /* Keymap BASE: (Base Layer) Default Layer * .----.,----------------------------------------------------------------------. @@ -64,40 +57,3 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { KC_LCTL, KC_LALT, KC_SPC, _______, KC_SPC, KC_RALT, KC_RCTL ), }; - - - - -//bool process_record_user(uint16_t keycode, keyrecord_t *record) { -// switch (keycode) { -// case QMKBEST: -// if (record->event.pressed) { -// // when keycode QMKBEST is pressed -// SEND_STRING("QMK is the best thing ever!"); -// } else { -// // when keycode QMKBEST is released -// } -// break; -// case QMKURL: -// if (record->event.pressed) { -// // when keycode QMKURL is pressed -// SEND_STRING("https://qmk.fm/" SS_TAP(X_ENTER)); -// } else { -// // when keycode QMKURL is released -// } -// break; -// } -// return true; -//} - -void matrix_init_user(void) { - -} - -void matrix_scan_user(void) { - -} - -void led_set_user(uint8_t usb_led) { - -} diff --git a/keyboards/sck/osa/keymaps/splitrs/keymap.c b/keyboards/sck/osa/keymaps/splitrs/keymap.c index 3c64300667..92f156321c 100644 --- a/keyboards/sck/osa/keymaps/splitrs/keymap.c +++ b/keyboards/sck/osa/keymaps/splitrs/keymap.c @@ -15,13 +15,6 @@ */ #include QMK_KEYBOARD_H -// Defines the keycodes used by our macros in process_record_user -//enum custom_keycodes { -// QMKBEST = SAFE_RANGE, -// QMKURL -//}; - - const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { /* Keymap BASE: (Base Layer) Default Layer * .----.,----------------------------------------------------------------------. @@ -64,40 +57,3 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { KC_LCTL, KC_LALT, KC_SPC, _______, KC_SPC, KC_RALT, KC_RCTL ), }; - - - - -//bool process_record_user(uint16_t keycode, keyrecord_t *record) { -// switch (keycode) { -// case QMKBEST: -// if (record->event.pressed) { -// // when keycode QMKBEST is pressed -// SEND_STRING("QMK is the best thing ever!"); -// } else { -// // when keycode QMKBEST is released -// } -// break; -// case QMKURL: -// if (record->event.pressed) { -// // when keycode QMKURL is pressed -// SEND_STRING("https://qmk.fm/" SS_TAP(X_ENTER)); -// } else { -// // when keycode QMKURL is released -// } -// break; -// } -// return true; -//} - -void matrix_init_user(void) { - -} - -void matrix_scan_user(void) { - -} - -void led_set_user(uint8_t usb_led) { - -} diff --git a/keyboards/sendyyeah/pix/config.h b/keyboards/sendyyeah/pix/config.h index 071064c8bc..9cef535287 100644 --- a/keyboards/sendyyeah/pix/config.h +++ b/keyboards/sendyyeah/pix/config.h @@ -25,11 +25,6 @@ /* Locking resynchronize hack */ #define LOCKING_RESYNC_ENABLE -#define RGBLED_NUM 15 -#define RGBLIGHT_HUE_STEP 8 -#define RGBLIGHT_SAT_STEP 8 -#define RGBLIGHT_VAL_STEP 8 -#define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */ #define RGBLIGHT_EFFECT_BREATHING #define RGBLIGHT_EFFECT_RAINBOW_MOOD #define RGBLIGHT_EFFECT_RAINBOW_SWIRL diff --git a/keyboards/sendyyeah/pix/info.json b/keyboards/sendyyeah/pix/info.json index c1ca4137cc..fdf28b40d0 100644 --- a/keyboards/sendyyeah/pix/info.json +++ b/keyboards/sendyyeah/pix/info.json @@ -8,6 +8,12 @@ "pid": "0x4E34", "device_version": "0.0.1" }, + "rgblight": { + "saturation_steps": 8, + "brightness_steps": 8, + "led_count": 15, + "sleep": true + }, "ws2812": { "pin": "B5" }, diff --git a/keyboards/senselessclay/ck65/config.h b/keyboards/senselessclay/ck65/config.h index 9aad2f69c3..7f1195b18c 100644 --- a/keyboards/senselessclay/ck65/config.h +++ b/keyboards/senselessclay/ck65/config.h @@ -39,7 +39,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. //#define NO_ACTION_ONESHOT /* RGB Backlighting */ -#define RGBLED_NUM 69 #define RGBLIGHT_EFFECT_BREATHING #define RGBLIGHT_EFFECT_RAINBOW_MOOD #define RGBLIGHT_EFFECT_RAINBOW_SWIRL @@ -50,5 +49,4 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #define RGBLIGHT_EFFECT_RGB_TEST #define RGBLIGHT_EFFECT_ALTERNATING #define RGBLIGHT_EFFECT_TWINKLE -#define RGBLIGHT_SLEEP #define RGBLIGHT_DEFAULT_MODE RGBLIGHT_MODE_RAINBOW_SWIRL+5 diff --git a/keyboards/senselessclay/ck65/info.json b/keyboards/senselessclay/ck65/info.json index 75bff408c6..3653aaf82e 100644 --- a/keyboards/senselessclay/ck65/info.json +++ b/keyboards/senselessclay/ck65/info.json @@ -12,7 +12,9 @@ "pin": "B1" }, "rgblight": { - "max_brightness": 122 + "led_count": 69, + "max_brightness": 122, + "sleep": true }, "matrix_pins": { "cols": ["F0", "D5", "D3", "D2", "D1", "D0", "F7", "C7", "C6", "B6", "B5", "B4", "D7", "D6", "D4"], diff --git a/keyboards/senselessclay/gos65/config.h b/keyboards/senselessclay/gos65/config.h index 907e7dea5d..38391089fc 100644 --- a/keyboards/senselessclay/gos65/config.h +++ b/keyboards/senselessclay/gos65/config.h @@ -39,7 +39,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. //#define NO_ACTION_ONESHOT /* RGB Backlighting */ -#define RGBLED_NUM 68 #define RGBLIGHT_EFFECT_BREATHING #define RGBLIGHT_EFFECT_RAINBOW_MOOD #define RGBLIGHT_EFFECT_RAINBOW_SWIRL @@ -50,4 +49,3 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #define RGBLIGHT_EFFECT_RGB_TEST #define RGBLIGHT_EFFECT_ALTERNATING #define RGBLIGHT_EFFECT_TWINKLE -#define RGBLIGHT_SLEEP diff --git a/keyboards/senselessclay/gos65/info.json b/keyboards/senselessclay/gos65/info.json index eb59447c39..ca23cd1a83 100644 --- a/keyboards/senselessclay/gos65/info.json +++ b/keyboards/senselessclay/gos65/info.json @@ -12,7 +12,9 @@ "pin": "B0" }, "rgblight": { - "max_brightness": 125 + "led_count": 68, + "max_brightness": 125, + "sleep": true }, "matrix_pins": { "cols": ["F4", "D5", "D3", "D2", "D1", "D0", "F7", "C7", "C6", "B6", "B5", "B4", "D7", "D6", "D4"], diff --git a/keyboards/sentraq/number_pad/config.h b/keyboards/sentraq/number_pad/config.h index d1cb9939bd..b3914214fe 100644 --- a/keyboards/sentraq/number_pad/config.h +++ b/keyboards/sentraq/number_pad/config.h @@ -17,11 +17,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #pragma once - #define RGBLED_NUM 13 - #define RGBLIGHT_HUE_STEP 8 - #define RGBLIGHT_SAT_STEP 8 - #define RGBLIGHT_VAL_STEP 8 - #define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */ #define RGBLIGHT_EFFECT_BREATHING #define RGBLIGHT_EFFECT_RAINBOW_MOOD #define RGBLIGHT_EFFECT_RAINBOW_SWIRL diff --git a/keyboards/sentraq/number_pad/info.json b/keyboards/sentraq/number_pad/info.json index 61b085d86f..7f78c1be99 100644 --- a/keyboards/sentraq/number_pad/info.json +++ b/keyboards/sentraq/number_pad/info.json @@ -7,6 +7,12 @@ "pid": "0x0000", "device_version": "0.0.1" }, + "rgblight": { + "saturation_steps": 8, + "brightness_steps": 8, + "led_count": 13, + "sleep": true + }, "ws2812": { "pin": "B0" }, diff --git a/keyboards/sentraq/s60_x/default/config.h b/keyboards/sentraq/s60_x/default/config.h index 1fa22a6e9d..c265dc1ef1 100644 --- a/keyboards/sentraq/s60_x/default/config.h +++ b/keyboards/sentraq/s60_x/default/config.h @@ -6,7 +6,4 @@ /* Locking resynchronize hack */ #define LOCKING_RESYNC_ENABLE -#define LOCKING_SUPPORT_ENABLE -#define LOCKING_RESYNC_ENABLE - #define NO_ACTION_ONESHOT diff --git a/keyboards/sentraq/s60_x/keymaps/ansi_qwertz/keymap.c b/keyboards/sentraq/s60_x/keymaps/ansi_qwertz/keymap.c index 6337639143..f1c8c29128 100644 --- a/keyboards/sentraq/s60_x/keymaps/ansi_qwertz/keymap.c +++ b/keyboards/sentraq/s60_x/keymaps/ansi_qwertz/keymap.c @@ -34,9 +34,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #define KC_FUNC MO(2) #define MICMUTE RCTL(KC_LCTL) -enum function_codes { -}; - enum layer_names { DEFAULT, GAMING, @@ -144,14 +141,6 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { ), }; -void matrix_init_user(void) { - -} - -void matrix_scan_user(void) { - -} - bool process_german(uint16_t keycode, keyrecord_t *record) { uint16_t send_code = 0; if (record->event.pressed) { @@ -208,7 +197,3 @@ bool process_record_user(uint16_t keycode, keyrecord_t *record) { return true; #endif } - -void led_set_user(uint8_t usb_led) { - -} diff --git a/keyboards/sentraq/s60_x/rgb/config.h b/keyboards/sentraq/s60_x/rgb/config.h index da4d3257a6..d702489ee7 100644 --- a/keyboards/sentraq/s60_x/rgb/config.h +++ b/keyboards/sentraq/s60_x/rgb/config.h @@ -16,7 +16,3 @@ #define RGBLIGHT_EFFECT_RGB_TEST #define RGBLIGHT_EFFECT_ALTERNATING #define RGBLIGHT_EFFECT_TWINKLE -#define RGBLED_NUM 10 -#define RGBLIGHT_HUE_STEP 8 -#define RGBLIGHT_SAT_STEP 8 -#define RGBLIGHT_VAL_STEP 8 diff --git a/keyboards/sentraq/s60_x/rgb/info.json b/keyboards/sentraq/s60_x/rgb/info.json index c311c6a513..fb95952d92 100644 --- a/keyboards/sentraq/s60_x/rgb/info.json +++ b/keyboards/sentraq/s60_x/rgb/info.json @@ -9,6 +9,11 @@ "pin": "B7", "breathing": true }, + "rgblight": { + "saturation_steps": 8, + "brightness_steps": 8, + "led_count": 10 + }, "ws2812": { "pin": "F6" }, diff --git a/keyboards/sentraq/s65_plus/config.h b/keyboards/sentraq/s65_plus/config.h index 900ea0aa40..1f134beb1e 100644 --- a/keyboards/sentraq/s65_plus/config.h +++ b/keyboards/sentraq/s65_plus/config.h @@ -10,10 +10,6 @@ #define RGBLIGHT_EFFECT_RGB_TEST #define RGBLIGHT_EFFECT_ALTERNATING #define RGBLIGHT_EFFECT_TWINKLE -#define RGBLED_NUM 20 -#define RGBLIGHT_HUE_STEP 8 -#define RGBLIGHT_SAT_STEP 8 -#define RGBLIGHT_VAL_STEP 8 #define RGBLIGHT_EFFECT_KNIGHT_OFFSET 20 /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ diff --git a/keyboards/sentraq/s65_plus/info.json b/keyboards/sentraq/s65_plus/info.json index f9287f2507..d2161c5cdb 100644 --- a/keyboards/sentraq/s65_plus/info.json +++ b/keyboards/sentraq/s65_plus/info.json @@ -16,6 +16,11 @@ "backlight": { "pin": "B7" }, + "rgblight": { + "saturation_steps": 8, + "brightness_steps": 8, + "led_count": 20 + }, "ws2812": { "pin": "D3" }, diff --git a/keyboards/sentraq/s65_x/config.h b/keyboards/sentraq/s65_x/config.h index 7b388614f4..1f134beb1e 100644 --- a/keyboards/sentraq/s65_x/config.h +++ b/keyboards/sentraq/s65_x/config.h @@ -10,12 +10,7 @@ #define RGBLIGHT_EFFECT_RGB_TEST #define RGBLIGHT_EFFECT_ALTERNATING #define RGBLIGHT_EFFECT_TWINKLE -#define RGBLED_NUM 20 -#define RGBLIGHT_HUE_STEP 8 -#define RGBLIGHT_SAT_STEP 8 -#define RGBLIGHT_VAL_STEP 8 #define RGBLIGHT_EFFECT_KNIGHT_OFFSET 20 -#define RGBLIGHT_SLEEP /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ #define LOCKING_SUPPORT_ENABLE diff --git a/keyboards/sentraq/s65_x/info.json b/keyboards/sentraq/s65_x/info.json index d87a6873ca..764c1edf2f 100644 --- a/keyboards/sentraq/s65_x/info.json +++ b/keyboards/sentraq/s65_x/info.json @@ -18,6 +18,12 @@ "levels": 5, "as_caps_lock": true }, + "rgblight": { + "saturation_steps": 8, + "brightness_steps": 8, + "led_count": 20, + "sleep": true + }, "ws2812": { "pin": "D3" }, diff --git a/keyboards/sets3n/kk980/config.h b/keyboards/sets3n/kk980/config.h index d7b29ad732..25a0458f32 100644 --- a/keyboards/sets3n/kk980/config.h +++ b/keyboards/sets3n/kk980/config.h @@ -33,22 +33,10 @@ #define RGBLIGHT_EFFECT_ALTERNATING #define RGBLIGHT_EFFECT_TWINKLE -#define RGBLED_NUM 102 -#define RGBLIGHT_LED_MAP { 0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11,\ - 12, 13, 14, 15, 16, 17, 18, 19, 20, 21, 22, 23, 24, 25, \ - 26, 27, 28, 29, 30, 31, 32, 33, 34, 35, 36, 37, 38, 39, \ - 40, 41, 42, 43, 44, 45, 46, 47, 48, 49, 50, 51, 52, 53, \ - 54, 55, 56, 57, 58, 59, 60, 61, 62, 63, 64, 65, 66, 67, \ - 68, 69, 70, 71, 72, 73, 74, 75, 76, 77, 78, 79, 80, 81, \ - 82, 83, 84, 85, 86, 87, 88, 89, 90, 91, 92, 93, 94, 95, \ - 96, 97, 98, 99, 100, 101, 102 } // 1 --> ScollLock 2 --> CapsLock 3 --> Bluetooth 4 --> NumLock -#define RGBLIGHT_HUE_STEP 8 -#define RGBLIGHT_SAT_STEP 8 -#define RGBLIGHT_VAL_STEP 8 #define RGBLIGHT_LAYERS #define RGBLIGHT_LAYERS_OVERRIDE_RGB_OFF #ifdef RGB_MATRIX_ENABLE -#define RGB_MATRIX_LED_COUNT RGBLED_NUM +#define RGB_MATRIX_LED_COUNT 102 #define RGB_MATRIX_KEYPRESSES #endif diff --git a/keyboards/sets3n/kk980/info.json b/keyboards/sets3n/kk980/info.json index f59f186bf4..1350b90013 100644 --- a/keyboards/sets3n/kk980/info.json +++ b/keyboards/sets3n/kk980/info.json @@ -12,6 +12,9 @@ "pin": "B7" }, "rgblight": { + "saturation_steps": 8, + "brightness_steps": 8, + "led_count": 102, "max_brightness": 230 }, "matrix_pins": { diff --git a/keyboards/shoc/keymaps/bongo/keymap.c b/keyboards/shoc/keymaps/bongo/keymap.c index 14779f1d75..8f57181330 100644 --- a/keyboards/shoc/keymaps/bongo/keymap.c +++ b/keyboards/shoc/keymaps/bongo/keymap.c @@ -163,7 +163,7 @@ bool oled_task_user(void) { oled_set_cursor(0,6); oled_write_P(PSTR(" WPM: "), false); oled_write(get_u8_str(get_current_wpm(), '0'), false); - if(host_keyboard_leds() & (1<<USB_LED_CAPS_LOCK)){ + if(host_keyboard_led_state().caps_lock){ oled_set_cursor(0,5); oled_write_P(PSTR(" CAPS LOCK"), false); } diff --git a/keyboards/signum/3_0/keymaps/default/generate_km.py b/keyboards/signum/3_0/keymaps/default/generate_km.py index cfa8edf57a..a939e4e73a 100755 --- a/keyboards/signum/3_0/keymaps/default/generate_km.py +++ b/keyboards/signum/3_0/keymaps/default/generate_km.py @@ -39,7 +39,7 @@ def _translate(s): elif re.match("^TT[0-9]{1,2}$", s): # Tn, works from TT0 to TT99 return ("TT({0})".format(s[2:]), "{0:^7}".format(s)) elif s in layout.uc_dict: - return ("X("+s+")", " {0} ".format(chr(int(layout.uc_dict[s], 0)))) + return ("UM("+s+")", " {0} ".format(chr(int(layout.uc_dict[s], 0)))) elif s in layout.qmk_dict: return (layout.qmk_dict[s], "{0:^7}".format(s)) elif s == s.upper() and s.startswith("KC_"): diff --git a/keyboards/signum/3_0/keymaps/default/layout.py b/keyboards/signum/3_0/keymaps/default/layout.py index 90fb1d9c94..4691985d29 100644 --- a/keyboards/signum/3_0/keymaps/default/layout.py +++ b/keyboards/signum/3_0/keymaps/default/layout.py @@ -396,7 +396,7 @@ qmk_dict = { # One Shot Keys missing # Swap Hands "_sp_swp": "SHT(KC_SPC)", - # Unicode support (via X()) included implicitly + # Unicode support included implicitly # Switching Unicode Input Modes "UC_win": "UC_WINC", "UC_lnx": "UC_LINX", "UC_mac": "UC_MAC", diff --git a/keyboards/silverbullet44/config.h b/keyboards/silverbullet44/config.h index 5485a99f59..30dc9f2744 100644 --- a/keyboards/silverbullet44/config.h +++ b/keyboards/silverbullet44/config.h @@ -19,30 +19,16 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #define MASTER_RIGHT - //#define RGBLIGHT_SPLIT - #define RGBLED_SPLIT {26, 26} - #define RGBLED_NUM 52 #ifdef RGB_MATRIX_ENABLE #define RGB_MATRIX_LED_COUNT 52 #define RGB_MATRIX_MAXIMUM_BRIGHTNESS 150 - #define RGB_MATRIX_HUE_STEP 8 - #define RGB_MATRIX_SAT_STEP 8 - #define RGB_MATRIX_VAL_STEP 8 - #define RGB_MATRIX_SPD_STEP 8 - #define RGB_MATRIX_FRAMEBUFFER_EFFECTS #define RGB_MATRIX_KEYPRESSES // reacts to keypresses #define RGB_MATRIX_DEFAULT_MODE RGB_MATRIX_TYPING_HEATMAP #else - #define RGBLIGHT_LED_MAP { 0,1,2,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,3,4,5,6, \ - 26,27,28,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,29,30,31,32 } - #define RGBLIGHT_HUE_STEP 8 - #define RGBLIGHT_SAT_STEP 8 - #define RGBLIGHT_VAL_STEP 8 - //#define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */ #define RGBLIGHT_EFFECT_BREATHING #define RGBLIGHT_EFFECT_RAINBOW_MOOD #define RGBLIGHT_EFFECT_RAINBOW_SWIRL diff --git a/keyboards/silverbullet44/info.json b/keyboards/silverbullet44/info.json index 5fc8686de2..11edcee166 100644 --- a/keyboards/silverbullet44/info.json +++ b/keyboards/silverbullet44/info.json @@ -12,10 +12,18 @@ "pin": "D3" }, "rgb_matrix": { - "driver": "WS2812" + "driver": "WS2812", + "sat_steps": 8, + "val_steps": 8, + "speed_steps": 8 }, "rgblight": { - "max_brightness": 150 + "saturation_steps": 8, + "brightness_steps": 8, + "led_count": 52, + "max_brightness": 150, + "led_map": [0, 1, 2, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 20, 21, 22, 23, 24, 25, 3, 4, 5, 6, 26, 27, 28, 33, 34, 35, 36, 37, 38, 39, 40, 41, 42, 43, 44, 45, 46, 47, 48, 49, 50, 51, 29, 30, 31, 32], + "split_count": [26, 26] }, "matrix_pins": { "cols": ["B3", "B1", "F7", "F6", "F5", "F4"], diff --git a/keyboards/singa/config.h b/keyboards/singa/config.h index 75b78de22d..d849732a07 100644 --- a/keyboards/singa/config.h +++ b/keyboards/singa/config.h @@ -17,9 +17,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #pragma once - -#define RGBLED_NUM 18 - #define RGBLIGHT_EFFECT_BREATHING #define RGBLIGHT_EFFECT_RAINBOW_MOOD #define RGBLIGHT_EFFECT_RAINBOW_SWIRL diff --git a/keyboards/singa/info.json b/keyboards/singa/info.json index 4c582df858..e2441b48e5 100644 --- a/keyboards/singa/info.json +++ b/keyboards/singa/info.json @@ -16,6 +16,9 @@ "backlight": { "pin": "D4" }, + "rgblight": { + "led_count": 18 + }, "ws2812": { "driver": "i2c" }, diff --git a/keyboards/sirius/unigo66/keymaps/danielhklein/keymap.c b/keyboards/sirius/unigo66/keymaps/danielhklein/keymap.c index f63da310fd..5b55d1ba24 100644 --- a/keyboards/sirius/unigo66/keymaps/danielhklein/keymap.c +++ b/keyboards/sirius/unigo66/keymaps/danielhklein/keymap.c @@ -130,14 +130,6 @@ const uint16_t keymaps[][MATRIX_ROWS][MATRIX_COLS] PROGMEM = { ) }; -void matrix_init_user(void) { - -} - -void matrix_scan_user(void) { - -} - bool process_record_user(uint16_t keycode, keyrecord_t *record) { switch (keycode) { case MAC: @@ -171,7 +163,3 @@ bool process_record_user(uint16_t keycode, keyrecord_t *record) { } return true; } - -void led_set_user(uint8_t usb_led) { - -} diff --git a/keyboards/skeletn87/hotswap/config.h b/keyboards/skeletn87/hotswap/config.h index 26ec63afd4..3da790a039 100644 --- a/keyboards/skeletn87/hotswap/config.h +++ b/keyboards/skeletn87/hotswap/config.h @@ -27,8 +27,3 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #define RGBLIGHT_EFFECT_RGB_TEST #define RGBLIGHT_EFFECT_ALTERNATING #define RGBLIGHT_EFFECT_TWINKLE -#define RGBLED_NUM 10 -#define RGBLIGHT_HUE_STEP 8 -#define RGBLIGHT_SAT_STEP 8 -#define RGBLIGHT_VAL_STEP 8 -#define RGBLIGHT_SLEEP diff --git a/keyboards/skeletn87/hotswap/info.json b/keyboards/skeletn87/hotswap/info.json index 6eccddef6b..fc3232ec85 100644 --- a/keyboards/skeletn87/hotswap/info.json +++ b/keyboards/skeletn87/hotswap/info.json @@ -26,7 +26,11 @@ "pin": "B3" }, "rgblight": { - "max_brightness": 200 + "saturation_steps": 8, + "brightness_steps": 8, + "led_count": 10, + "max_brightness": 200, + "sleep": true }, "processor": "atmega32u4", "bootloader": "atmel-dfu", diff --git a/keyboards/skeletn87/soldered/config.h b/keyboards/skeletn87/soldered/config.h index 26ec63afd4..3da790a039 100644 --- a/keyboards/skeletn87/soldered/config.h +++ b/keyboards/skeletn87/soldered/config.h @@ -27,8 +27,3 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #define RGBLIGHT_EFFECT_RGB_TEST #define RGBLIGHT_EFFECT_ALTERNATING #define RGBLIGHT_EFFECT_TWINKLE -#define RGBLED_NUM 10 -#define RGBLIGHT_HUE_STEP 8 -#define RGBLIGHT_SAT_STEP 8 -#define RGBLIGHT_VAL_STEP 8 -#define RGBLIGHT_SLEEP diff --git a/keyboards/skeletn87/soldered/info.json b/keyboards/skeletn87/soldered/info.json index fefb5073bb..479d68e701 100644 --- a/keyboards/skeletn87/soldered/info.json +++ b/keyboards/skeletn87/soldered/info.json @@ -26,7 +26,11 @@ "pin": "B2" }, "rgblight": { - "max_brightness": 200 + "saturation_steps": 8, + "brightness_steps": 8, + "led_count": 10, + "max_brightness": 200, + "sleep": true }, "processor": "atmega32u4", "bootloader": "atmel-dfu", diff --git a/keyboards/skeletonkbd/skeletonnumpad/config.h b/keyboards/skeletonkbd/skeletonnumpad/config.h index 829b08ea52..ed6c706fe1 100644 --- a/keyboards/skeletonkbd/skeletonnumpad/config.h +++ b/keyboards/skeletonkbd/skeletonnumpad/config.h @@ -17,11 +17,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #pragma once -# define RGBLED_NUM 17 -# define RGBLIGHT_HUE_STEP 8 -# define RGBLIGHT_SAT_STEP 8 -# define RGBLIGHT_VAL_STEP 8 -# define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */ # define RGBLIGHT_EFFECT_BREATHING # define RGBLIGHT_EFFECT_RAINBOW_MOOD # define RGBLIGHT_EFFECT_RAINBOW_SWIRL diff --git a/keyboards/skeletonkbd/skeletonnumpad/info.json b/keyboards/skeletonkbd/skeletonnumpad/info.json index 7ed7ee3949..380725dae5 100644 --- a/keyboards/skeletonkbd/skeletonnumpad/info.json +++ b/keyboards/skeletonkbd/skeletonnumpad/info.json @@ -12,7 +12,11 @@ "pin": "D4" }, "rgblight": { - "max_brightness": 120 + "saturation_steps": 8, + "brightness_steps": 8, + "led_count": 17, + "max_brightness": 120, + "sleep": true }, "matrix_pins": { "cols": ["D6", "D7", "B4", "B5"], diff --git a/keyboards/skippys_custom_pcs/rooboard65/config.h b/keyboards/skippys_custom_pcs/rooboard65/config.h index 5932113c94..e83868463a 100644 --- a/keyboards/skippys_custom_pcs/rooboard65/config.h +++ b/keyboards/skippys_custom_pcs/rooboard65/config.h @@ -23,7 +23,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #define LOCKING_RESYNC_ENABLE /* Define RGB Underglow */ -#define RGBLED_NUM 68 #define RGBLIGHT_EFFECT_BREATHING #define RGBLIGHT_EFFECT_RAINBOW_MOOD #define RGBLIGHT_EFFECT_RAINBOW_SWIRL diff --git a/keyboards/skippys_custom_pcs/rooboard65/info.json b/keyboards/skippys_custom_pcs/rooboard65/info.json index ca86bae4b9..cf05928058 100644 --- a/keyboards/skippys_custom_pcs/rooboard65/info.json +++ b/keyboards/skippys_custom_pcs/rooboard65/info.json @@ -12,6 +12,7 @@ "pin": "F7" }, "rgblight": { + "led_count": 68, "max_brightness": 96 }, "matrix_pins": { diff --git a/keyboards/skippys_custom_pcs/roopad/config.h b/keyboards/skippys_custom_pcs/roopad/config.h index f787da4012..c97f2a22df 100644 --- a/keyboards/skippys_custom_pcs/roopad/config.h +++ b/keyboards/skippys_custom_pcs/roopad/config.h @@ -17,9 +17,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #pragma once -#define RGBLED_NUM 21 -#define RGBLIGHT_SLEEP - #define RGBLIGHT_EFFECT_ALTERNATING #define RGBLIGHT_EFFECT_BREATHING #define RGBLIGHT_EFFECT_CHRISTMAS diff --git a/keyboards/skippys_custom_pcs/roopad/info.json b/keyboards/skippys_custom_pcs/roopad/info.json index 0bf27a69dc..dd4ff8c1bb 100644 --- a/keyboards/skippys_custom_pcs/roopad/info.json +++ b/keyboards/skippys_custom_pcs/roopad/info.json @@ -8,6 +8,10 @@ "pid": "0x0001", "device_version": "0.0.1" }, + "rgblight": { + "led_count": 21, + "sleep": true + }, "ws2812": { "pin": "B6" }, diff --git a/keyboards/skmt/15k/config.h b/keyboards/skmt/15k/config.h index 9d7338ccce..6e0360ec7b 100644 --- a/keyboards/skmt/15k/config.h +++ b/keyboards/skmt/15k/config.h @@ -19,7 +19,6 @@ //#define NO_ACTION_TAPPING //#define NO_ACTION_ONESHOT -#define RGBLED_NUM 15 // Number of LEDs #define RGB_MATRIX_LED_COUNT 15 // Number of LEDs #define RGB_DISABLE_WHEN_USB_SUSPENDED #define RGB_MATRIX_MAXIMUM_BRIGHTNESS 255 diff --git a/keyboards/smithrune/iron160/iron160_h/rules.mk b/keyboards/smithrune/iron160/iron160_h/rules.mk index 4c6ba89ef9..c889da168d 100644 --- a/keyboards/smithrune/iron160/iron160_h/rules.mk +++ b/keyboards/smithrune/iron160/iron160_h/rules.mk @@ -16,5 +16,3 @@ LTO_ENABLE = no EEPROM_DRIVER = wear_leveling WEAR_LEVELING_DRIVER = legacy -# Enter lower-power sleep mode when on the ChibiOS idle thread -OPT_DEFS += -DCORTEX_ENABLE_WFI_IDLE=TRUE diff --git a/keyboards/smithrune/iron160/iron160_s/rules.mk b/keyboards/smithrune/iron160/iron160_s/rules.mk index b7824fcbdf..2c863bbe31 100644 --- a/keyboards/smithrune/iron160/iron160_s/rules.mk +++ b/keyboards/smithrune/iron160/iron160_s/rules.mk @@ -16,5 +16,3 @@ LTO_ENABLE = no EEPROM_DRIVER = wear_leveling WEAR_LEVELING_DRIVER = legacy -# Enter lower-power sleep mode when on the ChibiOS idle thread -OPT_DEFS += -DCORTEX_ENABLE_WFI_IDLE=TRUE diff --git a/keyboards/smithrune/iron165r2/f072/config.h b/keyboards/smithrune/iron165r2/f072/config.h index 9f86b9e55c..67cbf311ae 100644 --- a/keyboards/smithrune/iron165r2/f072/config.h +++ b/keyboards/smithrune/iron165r2/f072/config.h @@ -21,7 +21,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #define BACKLIGHT_PWM_CHANNEL 1 #define BACKLIGHT_PAL_MODE 1 -#define RGBLED_NUM 22 #define RGBLIGHT_EFFECT_BREATHING #define RGBLIGHT_EFFECT_RAINBOW_MOOD #define RGBLIGHT_EFFECT_RAINBOW_SWIRL diff --git a/keyboards/smithrune/iron165r2/f072/info.json b/keyboards/smithrune/iron165r2/f072/info.json index 8ced3df775..9e980a15b9 100644 --- a/keyboards/smithrune/iron165r2/f072/info.json +++ b/keyboards/smithrune/iron165r2/f072/info.json @@ -4,6 +4,9 @@ "levels": 20, "breathing": true }, + "rgblight": { + "led_count": 22 + }, "ws2812": { "pin": "B15" }, diff --git a/keyboards/smithrune/iron165r2/f072/rules.mk b/keyboards/smithrune/iron165r2/f072/rules.mk index 8b584c9a42..b524e61f4b 100644 --- a/keyboards/smithrune/iron165r2/f072/rules.mk +++ b/keyboards/smithrune/iron165r2/f072/rules.mk @@ -13,5 +13,3 @@ LTO_ENABLE = no ENCODER_ENABLE = no BACKLIGHT_ENABLE = yes -# Enter lower-power sleep mode when on the ChibiOS idle thread -OPT_DEFS += -DCORTEX_ENABLE_WFI_IDLE=TRUE diff --git a/keyboards/smithrune/iron165r2/f411/config.h b/keyboards/smithrune/iron165r2/f411/config.h index fa904fdabb..5ce500d1e5 100644 --- a/keyboards/smithrune/iron165r2/f411/config.h +++ b/keyboards/smithrune/iron165r2/f411/config.h @@ -21,7 +21,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #define BACKLIGHT_PWM_CHANNEL 1 #define BACKLIGHT_PAL_MODE 2 -#define RGBLED_NUM 22 #define RGBLIGHT_EFFECT_BREATHING #define RGBLIGHT_EFFECT_RAINBOW_MOOD #define RGBLIGHT_EFFECT_RAINBOW_SWIRL diff --git a/keyboards/smithrune/iron165r2/f411/info.json b/keyboards/smithrune/iron165r2/f411/info.json index 7fd45874f2..220cc4d019 100644 --- a/keyboards/smithrune/iron165r2/f411/info.json +++ b/keyboards/smithrune/iron165r2/f411/info.json @@ -4,6 +4,9 @@ "levels": 20, "breathing": true }, + "rgblight": { + "led_count": 22 + }, "ws2812": { "pin": "B15", "driver": "pwm" diff --git a/keyboards/smithrune/iron165r2/f411/rules.mk b/keyboards/smithrune/iron165r2/f411/rules.mk index 5d4fe45457..e38a7a71b3 100644 --- a/keyboards/smithrune/iron165r2/f411/rules.mk +++ b/keyboards/smithrune/iron165r2/f411/rules.mk @@ -14,5 +14,3 @@ ENCODER_ENABLE = no EEPROM_DRIVER = i2c BACKLIGHT_ENABLE = yes -# Enter lower-power sleep mode when on the ChibiOS idle thread -OPT_DEFS += -DCORTEX_ENABLE_WFI_IDLE=TRUE diff --git a/keyboards/smithrune/iron165r2/iron165r2.c b/keyboards/smithrune/iron165r2/iron165r2.c index 7406c0029c..6f1606f89d 100644 --- a/keyboards/smithrune/iron165r2/iron165r2.c +++ b/keyboards/smithrune/iron165r2/iron165r2.c @@ -28,8 +28,6 @@ void board_init(void) { #endif } -#define LED_PIN_ON_STATE 1 - bool led_update_kb(led_t led_state) { bool res = led_update_user(led_state); if(res) writePin(LED_CAPS_LOCK_PIN, led_state.caps_lock); diff --git a/keyboards/smithrune/iron180/rules.mk b/keyboards/smithrune/iron180/rules.mk index 837bececdc..bfb4a63764 100644 --- a/keyboards/smithrune/iron180/rules.mk +++ b/keyboards/smithrune/iron180/rules.mk @@ -13,5 +13,3 @@ AUDIO_ENABLE = no # Audio output ENCODER_ENABLE = no LTO_ENABLE = no -# Enter lower-power sleep mode when on the ChibiOS idle thread -OPT_DEFS += -DCORTEX_ENABLE_WFI_IDLE=TRUE diff --git a/keyboards/smk60/config.h b/keyboards/smk60/config.h index 9cc3f8601e..24fbd4d7b9 100644 --- a/keyboards/smk60/config.h +++ b/keyboards/smk60/config.h @@ -21,7 +21,6 @@ //#define NO_ACTION_ONESHOT //rgb light setting -#define RGBLED_NUM 4 #define RGBLIGHT_EFFECT_BREATHING #define RGBLIGHT_EFFECT_RAINBOW_MOOD #define RGBLIGHT_EFFECT_RAINBOW_SWIRL @@ -32,6 +31,3 @@ #define RGBLIGHT_EFFECT_RGB_TEST #define RGBLIGHT_EFFECT_ALTERNATING #define RGBLIGHT_EFFECT_TWINKLE -#define RGBLIGHT_HUE_STEP 8 -#define RGBLIGHT_SAT_STEP 8 -#define RGBLIGHT_VAL_STEP 8 diff --git a/keyboards/smk60/info.json b/keyboards/smk60/info.json index f80f3f260b..df95cc0f24 100644 --- a/keyboards/smk60/info.json +++ b/keyboards/smk60/info.json @@ -8,6 +8,11 @@ "pid": "0x6585", "device_version": "0.0.1" }, + "rgblight": { + "saturation_steps": 8, + "brightness_steps": 8, + "led_count": 4 + }, "ws2812": { "pin": "E6" }, diff --git a/keyboards/sneakbox/aliceclonergb/config.h b/keyboards/sneakbox/aliceclonergb/config.h index ceccc0915b..8c87904b09 100644 --- a/keyboards/sneakbox/aliceclonergb/config.h +++ b/keyboards/sneakbox/aliceclonergb/config.h @@ -27,7 +27,3 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #define RGBLIGHT_EFFECT_RGB_TEST #define RGBLIGHT_EFFECT_ALTERNATING #define RGBLIGHT_EFFECT_TWINKLE -#define RGBLED_NUM 16 -#define RGBLIGHT_HUE_STEP 8 -#define RGBLIGHT_SAT_STEP 8 -#define RGBLIGHT_VAL_STEP 8 diff --git a/keyboards/sneakbox/aliceclonergb/info.json b/keyboards/sneakbox/aliceclonergb/info.json index e16645e735..d9b76d7676 100644 --- a/keyboards/sneakbox/aliceclonergb/info.json +++ b/keyboards/sneakbox/aliceclonergb/info.json @@ -26,6 +26,11 @@ "bootmagic": { "matrix": [2, 0] }, + "rgblight": { + "saturation_steps": 8, + "brightness_steps": 8, + "led_count": 16 + }, "ws2812": { "pin": "D5" }, diff --git a/keyboards/sneakbox/ava/config.h b/keyboards/sneakbox/ava/config.h index a97d34f7f2..8c87904b09 100644 --- a/keyboards/sneakbox/ava/config.h +++ b/keyboards/sneakbox/ava/config.h @@ -27,7 +27,3 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #define RGBLIGHT_EFFECT_RGB_TEST #define RGBLIGHT_EFFECT_ALTERNATING #define RGBLIGHT_EFFECT_TWINKLE -#define RGBLED_NUM 14 -#define RGBLIGHT_HUE_STEP 8 -#define RGBLIGHT_SAT_STEP 8 -#define RGBLIGHT_VAL_STEP 8
\ No newline at end of file diff --git a/keyboards/sneakbox/ava/info.json b/keyboards/sneakbox/ava/info.json index 693794e031..b96ed8290e 100644 --- a/keyboards/sneakbox/ava/info.json +++ b/keyboards/sneakbox/ava/info.json @@ -22,6 +22,11 @@ "caps_lock": "D6", "num_lock": "D4" }, + "rgblight": { + "saturation_steps": 8, + "brightness_steps": 8, + "led_count": 14 + }, "ws2812": { "pin": "F7" }, diff --git a/keyboards/soda/cherish/config.h b/keyboards/soda/cherish/config.h index 9d07bd0dce..43840513f4 100644 --- a/keyboards/soda/cherish/config.h +++ b/keyboards/soda/cherish/config.h @@ -48,7 +48,3 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #define RGBLIGHT_EFFECT_RGB_TEST #define RGBLIGHT_EFFECT_ALTERNATING #define RGBLIGHT_EFFECT_TWINKLE -#define RGBLED_NUM 1 -#define RGBLIGHT_HUE_STEP 8 -#define RGBLIGHT_SAT_STEP 8 -#define RGBLIGHT_VAL_STEP 8 diff --git a/keyboards/soda/cherish/info.json b/keyboards/soda/cherish/info.json index 71ee91e660..48e4d137be 100644 --- a/keyboards/soda/cherish/info.json +++ b/keyboards/soda/cherish/info.json @@ -8,6 +8,11 @@ "pid": "0xEB52", "device_version": "0.0.1" }, + "rgblight": { + "saturation_steps": 8, + "brightness_steps": 8, + "led_count": 1 + }, "ws2812": { "pin": "A13" }, diff --git a/keyboards/soda/cherish/rules.mk b/keyboards/soda/cherish/rules.mk index 4e0fe55873..a8af2d4ebc 100644 --- a/keyboards/soda/cherish/rules.mk +++ b/keyboards/soda/cherish/rules.mk @@ -14,5 +14,3 @@ AUDIO_ENABLE = no # Audio output # Wildcard to allow APM32 MCU DFU_SUFFIX_ARGS = -p FFFF -v FFFF -# Enter lower-power sleep mode when on the ChibiOS idle thread -OPT_DEFS += -DCORTEX_ENABLE_WFI_IDLE=TRUE diff --git a/keyboards/soda/pocket/config.h b/keyboards/soda/pocket/config.h index 2387f9a000..ce02ad5d68 100644 --- a/keyboards/soda/pocket/config.h +++ b/keyboards/soda/pocket/config.h @@ -15,8 +15,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #pragma once -#define LED_NUM_LOCK_PIN B15 - /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ #define LOCKING_SUPPORT_ENABLE /* Locking resynchronize hack */ diff --git a/keyboards/soda/pocket/info.json b/keyboards/soda/pocket/info.json index c1396ab3a1..b15447c75e 100644 --- a/keyboards/soda/pocket/info.json +++ b/keyboards/soda/pocket/info.json @@ -9,6 +9,9 @@ "device_version": "1.0.2", "force_nkro": true }, + "indicators": { + "num_lock": "B15" + }, "ws2812": { "pin": "C15" }, diff --git a/keyboards/soda/pocket/rules.mk b/keyboards/soda/pocket/rules.mk index 27092ddbc6..24a8c52e48 100644 --- a/keyboards/soda/pocket/rules.mk +++ b/keyboards/soda/pocket/rules.mk @@ -9,5 +9,3 @@ NKRO_ENABLE = yes # Enable N-Key Rollover BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality AUDIO_ENABLE = no # Audio output -# Enter lower-power sleep mode when on the ChibiOS idle thread -OPT_DEFS += -DCORTEX_ENABLE_WFI_IDLE=TRUE diff --git a/keyboards/sofle/keyhive/config.h b/keyboards/sofle/keyhive/config.h index 9e36e1588e..1e90cbab48 100755 --- a/keyboards/sofle/keyhive/config.h +++ b/keyboards/sofle/keyhive/config.h @@ -18,8 +18,6 @@ #pragma once -#define TAP_CODE_DELAY 10 - // OLED settings #define OLED_TIMEOUT 80000 #define OLED_BRIGHTNESS 90 @@ -27,41 +25,3 @@ #define SPLIT_WPM_ENABLE #define SPLIT_OLED_ENABLE #define SPLIT_TRANSPORT_MIRROR - -// Add RGB underglow -// by defining in the keyboard, incompatible keymaps will fail to compile. -#ifdef RGBLIGHT_ENABLE -# define RGBLED_NUM 74 -# define RGBLED_SPLIT {37,37} -# define RGBLIGHT_HUE_STEP 10 -# define RGBLIGHT_SAT_STEP 17 -# define RGBLIGHT_VAL_STEP 17 -//# define RGBLIGHT_LAYERS //Enable layer light indicators. Not required as updates are done in layer_state_set_user and led_update_user (+588). -# define RGBLIGHT_SLEEP //Turn off LEDs when computer sleeping (+72) - -//RGB LED Conversion macro from physical array to electric array (+146). This results in better looking animated effects. -//First section is the LED matrix, second section is the electrical wiring order, and the third section is the desired mapping -# define LED_LAYOUT( \ - L00, L01, L02, L03, L04, L05, L08, L09, L010, L011, L012, L013, \ - L10, L12, L14, L19, L111, L113, \ - L20, L21, L22, L23, L24, L25, L28, L29, L210, L211, L212, L213, \ - L30, L31, L32, L33, L34, L35, L38, L39, L310, L311, L312, L313, \ - L40, L42, L44, L49, L411, L413, \ - L50, L51, L52, L53, L54, L55, L58, L59, L510, L511, L512, L513, \ - L62, L63, L64, L65, L66, L67, L68, L69, L610, L611, \ - L71, L76, L77, L712 )\ - { \ - L14,L12,L10,L40,L42,L44,L71,L76,L66,L65,L55,L35,L25,L05,L04,L24,L34,L54,L64,L63,L53,L33,L23,L03,L02,L22,L32,L52,L62,L51,L31,L21,L01,L00,L20,L30,L50,L19,L111,L113,L413,L411,L49,L712,L77,L67,L68,L58,L38,L28,L08,L09,L29,L39,L59,L69,L610,L510,L310,L210,L010,L011,L211,L311,L511,L611,L512,L312,L212,L012,L013,L213,L313,L513, \ - } -//RGB LED logical order map -# define RGBLIGHT_LED_MAP LED_LAYOUT( \ - 5, 6, 17, 18, 29, 30, 43, 44, 55, 56, 67, 68, \ - 4, 16, 28, 45, 57, 69, \ - 3, 7, 15, 19, 27, 31, 42, 46, 54, 58, 66, 70, \ - 2, 8, 14, 20, 26, 32, 41, 47, 53, 59, 65, 71, \ - 1, 13, 25, 48, 60, 72, \ - 0, 9, 12, 21, 24, 33, 40, 49, 52, 61, 64, 73, \ - 11, 22, 23, 34, 35, 38, 39, 50, 51, 62, \ - 10, 36, 37, 63 ) - -#endif diff --git a/keyboards/sofle/keyhive/info.json b/keyboards/sofle/keyhive/info.json index 7a453b675e..1f7ae8b209 100644 --- a/keyboards/sofle/keyhive/info.json +++ b/keyboards/sofle/keyhive/info.json @@ -10,7 +10,12 @@ "pin": "D3" }, "rgblight": { - "max_brightness": 100 + "hue_steps": 10, + "led_count": 74, + "max_brightness": 100, + "led_map": [28, 16, 4, 1, 13, 25, 10, 36, 35, 34, 33, 32, 31, 30, 29, 27, 26, 24, 23, 22, 21, 20, 19, 18, 17, 15, 14, 12, 11, 9, 8, 7, 6, 5, 3, 2, 0, 45, 57, 69, 72, 60, 48, 63, 37, 38, 39, 40, 41, 42, 43, 44, 46, 47, 49, 50, 51, 52, 53, 54, 55, 56, 58, 59, 61, 62, 64, 65, 66, 67, 68, 70, 71, 73], + "sleep": true, + "split_count": [37, 37] }, "matrix_pins": { "cols": ["B6", "B2", "B3", "B1", "F7", "F6", null], @@ -38,6 +43,9 @@ } } }, + "qmk": { + "tap_keycode_delay": 10 + }, "processor": "atmega32u4", "bootloader": "atmel-dfu", "layouts": { diff --git a/keyboards/sofle/keymaps/keyhive_via/encoder.c b/keyboards/sofle/keymaps/keyhive_via/encoder.c deleted file mode 100644 index 7775cb7b86..0000000000 --- a/keyboards/sofle/keymaps/keyhive_via/encoder.c +++ /dev/null @@ -1,48 +0,0 @@ - /* Copyright 2020 Josef Adamcik - * Modification for VIA support and RGB underglow by Jens Bonk-Wiltfang - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see <http://www.gnu.org/licenses/>. - */ - -//Setting up what encoder rotation does. If your encoder can be pressed as a button, that function can be set in Via. - -#ifdef ENCODER_ENABLE - static uint8_t encoder_state[2] = {0}; - //Use these keymap positions to specify the encoder functions on rotate. - static keypos_t encoder_ccw[2] = {{6, 3}, {6, 8}}; - static keypos_t encoder_cw[2] = {{6, 1}, {6, 6}}; - - void encoder_action_unregister(void) { - for (int index = 0; index < 2; ++index) { - if (encoder_state[index]) { - keyevent_t encoder_event = (keyevent_t){.key = encoder_state[index] >> 1 ? encoder_cw[index] : encoder_ccw[index], .pressed = false, .time = timer_read(), .type = KEY_EVENT}; - encoder_state[index] = 0; - action_exec(encoder_event); - } - } - } - - void encoder_action_register(uint8_t index, bool clockwise) { - keyevent_t encoder_event = (keyevent_t){.key = clockwise ? encoder_cw[index] : encoder_ccw[index], .pressed = true, .time = timer_read(), .type = KEY_EVENT}; - encoder_state[index] = (clockwise ^ 1) | (clockwise << 1); - action_exec(encoder_event); - } - - void matrix_scan_user(void) { encoder_action_unregister(); } - - bool encoder_update_user(uint8_t index, bool clockwise) { - encoder_action_register(index, clockwise); - return false; - }; -#endif diff --git a/keyboards/sofle/keymaps/keyhive_via/keymap.c b/keyboards/sofle/keymaps/keyhive_via/keymap.c index 032c834f44..8af870c574 100644 --- a/keyboards/sofle/keymaps/keyhive_via/keymap.c +++ b/keyboards/sofle/keymaps/keyhive_via/keymap.c @@ -18,7 +18,6 @@ #include QMK_KEYBOARD_H #include "oled.c" -#include "encoder.c" // Base layer is the number of layers CYCLE selects from. #define BASE_LAYERS 2 @@ -35,27 +34,6 @@ enum custom_layers { _RAISE }; -// Extra keys are added for rotary encoder support in VIA -#define LAYOUT_via( \ - LA1, LA2, LA3, LA4, LA5, LA6, RA6, RA5, RA4, RA3, RA2, RA1, \ - LB1, LB2, LB3, LB4, LB5, LB6, LB7, RB7, RB6, RB5, RB4, RB3, RB2, RB1, \ - LC1, LC2, LC3, LC4, LC5, LC6, LE1, RE6, RC6, RC5, RC4, RC3, RC2, RC1, \ - LD1, LD2, LD3, LD4, LD5, LD6, LD7, RD7, RD6, RD5, RD4, RD3, RD2, RD1, \ - LE2, LE3, LE4, LE5, LE6, RE5, RE4, RE3, RE2, RE1 \ - ) \ - { \ - { LA1, LA2, LA3, LA4, LA5, LA6, KC_NO }, \ - { LB1, LB2, LB3, LB4, LB5, LB6, LB7 }, \ - { LC1, LC2, LC3, LC4, LC5, LC6, KC_NO }, \ - { LD1, LD2, LD3, LD4, LD5, LD6, LD7 }, \ - { LE1, LE2, LE3, LE4, LE5, LE6, KC_NO }, \ - { RA1, RA2, RA3, RA4, RA5, RA6, KC_NO }, \ - { RB1, RB2, RB3, RB4, RB5, RB6, RB7 }, \ - { RC1, RC2, RC3, RC4, RC5, RC6, KC_NO }, \ - { RD1, RD2, RD3, RD4, RD5, RD6, RD7 }, \ - { RE1, RE2, RE3, RE4, RE5, RE6, KC_NO } \ - } - //Default keymap. This can be changed in Via. Use oled.c to change beavior that Via cannot change. const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { /* @@ -74,11 +52,11 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { * `-----------------------------------' '------''---------------------------' */ -[_QWERTY] = LAYOUT_via( +[_QWERTY] = LAYOUT( KC_GRV, KC_1 , KC_2 , KC_3 , KC_4 , KC_5 , KC_6 , KC_7 , KC_8 , KC_9 , KC_0 , KC_GRV , - KC_ESC, KC_Q , KC_W , KC_E , KC_R , KC_T , KC_VOLU, KC_PGUP, KC_Y , KC_U , KC_I , KC_O , KC_P , KC_BSPC, - KC_TAB, KC_A , KC_S , KC_D , KC_F , KC_G , KC_MUTE, KC_NO , KC_H , KC_J , KC_K , KC_L , KC_SCLN, KC_QUOT, - KC_LSFT, KC_Z , KC_X , KC_C , KC_V , KC_B , KC_VOLD, KC_PGDN, KC_N , KC_M , KC_COMM, KC_DOT , KC_SLSH, KC_RSFT, + KC_ESC, KC_Q , KC_W , KC_E , KC_R , KC_T , KC_Y , KC_U , KC_I , KC_O , KC_P , KC_BSPC, + KC_TAB, KC_A , KC_S , KC_D , KC_F , KC_G , KC_H , KC_J , KC_K , KC_L , KC_SCLN, KC_QUOT, + KC_LSFT, KC_Z , KC_X , KC_C , KC_V , KC_B , KC_MUTE, KC_NO, KC_N , KC_M , KC_COMM, KC_DOT , KC_SLSH, KC_RSFT, KC_LGUI,KC_LALT ,KC_LCTL,MO(_LOWER), KC_ENT , KC_SPC ,MO(_RAISE),KC_RCTL, KC_RALT, KC_RGUI ), /* @@ -97,7 +75,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { * `-----------------------------------' '------''---------------------------' */ /* -[_COLEMAK] = LAYOUT_via( +[_COLEMAK] = LAYOUT( KC_GRV , KC_1 , KC_2 , KC_3 , KC_4 , KC_5 , KC_6 , KC_7 , KC_8 , KC_9 , KC_0 , KC_GRV , KC_ESC , KC_Q , KC_W , KC_F , KC_P , KC_G , KC_VOLU, KC_PGUP, KC_J , KC_L , KC_U , KC_Y , KC_SCLN, KC_BSPC, KC_TAB , KC_A , KC_R , KC_S , KC_T , KC_D , KC_MUTE, KC_NO , KC_H , KC_N , KC_E , KC_I , KC_O , KC_QUOT, @@ -121,11 +99,11 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { * | | | | |/ / \ \ | | | | | * `-----------------------------------' '------''---------------------------' */ -[_COLEMAK] = LAYOUT_via( +[_COLEMAK] = LAYOUT( KC_GRV , KC_1 , KC_2 , KC_3 , KC_4 , KC_5 , KC_6 , KC_7 , KC_8 , KC_9 , KC_0 , KC_GRV , - KC_ESC , KC_Q , KC_W , KC_F , KC_P , KC_B , KC_VOLU, KC_PGUP, KC_J , KC_L , KC_U , KC_Y , KC_SCLN, KC_BSPC, - KC_TAB , KC_A , KC_R , KC_S , KC_T , KC_G , KC_MUTE, KC_NO , KC_M , KC_N , KC_E , KC_I , KC_O , KC_QUOT, - KC_LSFT, KC_Z , KC_X , KC_C , KC_D , KC_V , KC_VOLD, KC_PGDN, KC_K , KC_H , KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, + KC_ESC , KC_Q , KC_W , KC_F , KC_P , KC_B , KC_J , KC_L , KC_U , KC_Y , KC_SCLN, KC_BSPC, + KC_TAB , KC_A , KC_R , KC_S , KC_T , KC_G , KC_M , KC_N , KC_E , KC_I , KC_O , KC_QUOT, + KC_LSFT, KC_Z , KC_X , KC_C , KC_D , KC_V , _______, _______, KC_K , KC_H , KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_LGUI, KC_LALT,KC_LCTL,MO(_LOWER), KC_ENT , KC_SPC ,MO(_RAISE),KC_RCTL, KC_RALT, KC_RGUI ), @@ -143,11 +121,11 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { * | | | | |/ / \ \ | | | | | * `-----------------------------------' '------''---------------------------' */ -[_LOWER] = LAYOUT_via( +[_LOWER] = LAYOUT( _______, KC_F1 , KC_F2 , KC_F3 , KC_F4 , KC_F5 , KC_F6 , KC_F7 , KC_F8 , KC_F9 , KC_F10 , KC_F11 , - KC_GRV , KC_1 , KC_2 , KC_3 , KC_4 , KC_5 , _______, _______, KC_6 , KC_7 , KC_8 , KC_9 , KC_0 , KC_F12 , - _______, KC_EXLM, KC_AT , KC_HASH, KC_DLR , KC_PERC, _______, _______, KC_CIRC, KC_AMPR, KC_ASTR, KC_LPRN, KC_RPRN, KC_PIPE, - _______, KC_EQL , KC_MINS, KC_PLUS, KC_LCBR, KC_RCBR, _______, _______, KC_LBRC, KC_RBRC, KC_SCLN, KC_COLN, KC_BSLS, _______, + KC_GRV , KC_1 , KC_2 , KC_3 , KC_4 , KC_5 , KC_6 , KC_7 , KC_8 , KC_9 , KC_0 , KC_F12 , + _______, KC_EXLM, KC_AT , KC_HASH, KC_DLR , KC_PERC, KC_CIRC, KC_AMPR, KC_ASTR, KC_LPRN, KC_RPRN, KC_PIPE, + _______, KC_EQL , KC_MINS, KC_PLUS, KC_LCBR, KC_RCBR, _______, _______, KC_LBRC, KC_RBRC, KC_SCLN, KC_COLN, KC_BSLS, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______ ), /* RAISE @@ -164,11 +142,11 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { * | | | | |/ / \ \ | | | | | * `----------------------------------' '------''---------------------------' */ -[_RAISE] = LAYOUT_via( +[_RAISE] = LAYOUT( CYCLE, _______, _______, _______, _______ , _______, _______, _______, _______, _______, _______, _______, - _______, KC_INS , KC_PSCR, KC_APP , XXXXXXX , XXXXXXX, _______, _______, KC_PGUP, _______, KC_UP , _______, _______, KC_BSPC, - _______, KC_LALT, KC_LCTL, KC_LSFT, XXXXXXX , KC_CAPS, _______, _______, KC_PGDN, KC_LEFT, KC_DOWN, KC_RGHT, KC_DEL , KC_BSPC, - _______, KC_UNDO, KC_CUT , KC_COPY, KC_PASTE, XXXXXXX, _______, _______, XXXXXXX, _______, XXXXXXX, _______, XXXXXXX, _______, + _______, KC_INS , KC_PSCR, KC_APP , XXXXXXX , XXXXXXX, KC_PGUP, _______, KC_UP , _______, _______, KC_BSPC, + _______, KC_LALT, KC_LCTL, KC_LSFT, XXXXXXX , KC_CAPS, KC_PGDN, KC_LEFT, KC_DOWN, KC_RGHT, KC_DEL , KC_BSPC, + _______, KC_UNDO, KC_CUT , KC_COPY, KC_PASTE, XXXXXXX, _______, _______, XXXXXXX, _______, XXXXXXX, _______, XXXXXXX, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______ ) }; @@ -189,3 +167,12 @@ bool process_record_user(uint16_t keycode, keyrecord_t *record) { // this uses less memory than returning in each case. return keycode < SAFE_RANGE; }; + + #ifdef ENCODER_MAP_ENABLE +const uint16_t PROGMEM encoder_map[][NUM_ENCODERS][NUM_DIRECTIONS] = { + [0] = { ENCODER_CCW_CW(KC_BSPC, KC_DEL), ENCODER_CCW_CW(KC_PGDN, KC_PGUP) }, + [1] = { ENCODER_CCW_CW(_______, _______), ENCODER_CCW_CW(_______, _______) }, + [2] = { ENCODER_CCW_CW(_______, _______), ENCODER_CCW_CW(_______, _______) }, + [3] = { ENCODER_CCW_CW(_______, _______), ENCODER_CCW_CW(_______, _______) } +}; +#endif diff --git a/keyboards/sofle/keymaps/keyhive_via/rules.mk b/keyboards/sofle/keymaps/keyhive_via/rules.mk index 2875254096..c7fce92a4f 100644 --- a/keyboards/sofle/keymaps/keyhive_via/rules.mk +++ b/keyboards/sofle/keymaps/keyhive_via/rules.mk @@ -1,2 +1,3 @@ VIA_ENABLE = yes RGBLIGHT_ENABLE = yes +ENCODER_MAP_ENABLE = yes diff --git a/keyboards/sofle/rev1/config.h b/keyboards/sofle/rev1/config.h deleted file mode 100644 index be64549748..0000000000 --- a/keyboards/sofle/rev1/config.h +++ /dev/null @@ -1,5 +0,0 @@ -#pragma once - -#define TAPPING_TERM 100 - -#define TAP_CODE_DELAY 10 diff --git a/keyboards/sofle/rev1/info.json b/keyboards/sofle/rev1/info.json index 23d411602e..5ab71ff1e3 100644 --- a/keyboards/sofle/rev1/info.json +++ b/keyboards/sofle/rev1/info.json @@ -28,6 +28,12 @@ } } }, + "tapping": { + "term": 100 + }, + "qmk": { + "tap_keycode_delay": 10 + }, "processor": "atmega32u4", "bootloader": "caterina", "layouts": { diff --git a/keyboards/sowbug/68keys/config.h b/keyboards/sowbug/68keys/config.h index 04b1fced2b..0836a67e88 100644 --- a/keyboards/sowbug/68keys/config.h +++ b/keyboards/sowbug/68keys/config.h @@ -19,8 +19,7 @@ #pragma once #define RGB_MATRIX_KEYPRESSES -#define RGBLED_NUM 68 -#define RGB_MATRIX_LED_COUNT RGBLED_NUM +#define RGB_MATRIX_LED_COUNT 68 #define RGB_MATRIX_FRAMEBUFFER_EFFECTS #define RGB_MATRIX_MAXIMUM_BRIGHTNESS 128 // RGB Matrix Animation modes. Explicitly enabled diff --git a/keyboards/sowbug/68keys/rules.mk b/keyboards/sowbug/68keys/rules.mk index b7807ae418..c49a369dd0 100644 --- a/keyboards/sowbug/68keys/rules.mk +++ b/keyboards/sowbug/68keys/rules.mk @@ -12,5 +12,3 @@ RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow AUDIO_ENABLE = no # Audio output RGB_MATRIX_ENABLE = yes -# Enter lower-power sleep mode when on the ChibiOS idle thread -OPT_DEFS += -DCORTEX_ENABLE_WFI_IDLE=TRUE diff --git a/keyboards/sowbug/ansi_tkl/config.h b/keyboards/sowbug/ansi_tkl/config.h index 08c01e662d..4b1538b645 100644 --- a/keyboards/sowbug/ansi_tkl/config.h +++ b/keyboards/sowbug/ansi_tkl/config.h @@ -19,8 +19,7 @@ #pragma once #define RGB_MATRIX_KEYPRESSES -#define RGBLED_NUM 87 -#define RGB_MATRIX_LED_COUNT RGBLED_NUM +#define RGB_MATRIX_LED_COUNT 87 #define RGB_MATRIX_FRAMEBUFFER_EFFECTS #define RGB_MATRIX_MAXIMUM_BRIGHTNESS 128 diff --git a/keyboards/sowbug/ansi_tkl/rules.mk b/keyboards/sowbug/ansi_tkl/rules.mk index b7807ae418..c49a369dd0 100644 --- a/keyboards/sowbug/ansi_tkl/rules.mk +++ b/keyboards/sowbug/ansi_tkl/rules.mk @@ -12,5 +12,3 @@ RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow AUDIO_ENABLE = no # Audio output RGB_MATRIX_ENABLE = yes -# Enter lower-power sleep mode when on the ChibiOS idle thread -OPT_DEFS += -DCORTEX_ENABLE_WFI_IDLE=TRUE diff --git a/keyboards/spaceholdings/nebula12/config.h b/keyboards/spaceholdings/nebula12/config.h index 9d044bb4c5..209da53681 100755 --- a/keyboards/spaceholdings/nebula12/config.h +++ b/keyboards/spaceholdings/nebula12/config.h @@ -40,10 +40,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #define WS2812_SPI_SCK_PAL_MODE 0 #define WS2812_SPI_SCK_PIN B13 - #define RGBLED_NUM 10 /* If number is smaller, buffer updates too fast causing glitches */ - #define RGBLIGHT_HUE_STEP 8 - #define RGBLIGHT_SAT_STEP 8 - #define RGBLIGHT_VAL_STEP 8 #define RGBLIGHT_EFFECT_BREATHING #define RGBLIGHT_EFFECT_RAINBOW_MOOD #define RGBLIGHT_EFFECT_RAINBOW_SWIRL diff --git a/keyboards/spaceholdings/nebula12/info.json b/keyboards/spaceholdings/nebula12/info.json index aa5dbc1873..c35cc685f2 100755 --- a/keyboards/spaceholdings/nebula12/info.json +++ b/keyboards/spaceholdings/nebula12/info.json @@ -8,6 +8,11 @@ "pid": "0x5337", "device_version": "0.0.1" }, + "rgblight": { + "saturation_steps": 8, + "brightness_steps": 8, + "led_count": 10 + }, "ws2812": { "pin": "B15", "driver": "spi" diff --git a/keyboards/spaceholdings/nebula68/config.h b/keyboards/spaceholdings/nebula68/config.h index f053847822..b532cea3d2 100755 --- a/keyboards/spaceholdings/nebula68/config.h +++ b/keyboards/spaceholdings/nebula68/config.h @@ -23,10 +23,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #define WS2812_DMA_STREAM STM32_DMA1_STREAM3 // DMA Stream for TIMx_UP, see the respective reference manual for the appropriate values for your MCU. #define WS2812_DMA_CHANNEL 3 // DMA Channel for TIMx_UP, see the respective reference manual for the appropriate values for your MCU. - #define RGBLED_NUM 10 - #define RGBLIGHT_HUE_STEP 8 - #define RGBLIGHT_SAT_STEP 8 - #define RGBLIGHT_VAL_STEP 8 #define RGBLIGHT_EFFECT_BREATHING #define RGBLIGHT_EFFECT_RAINBOW_MOOD #define RGBLIGHT_EFFECT_RAINBOW_SWIRL diff --git a/keyboards/spaceholdings/nebula68/info.json b/keyboards/spaceholdings/nebula68/info.json index 2e1165a810..50335a6911 100755 --- a/keyboards/spaceholdings/nebula68/info.json +++ b/keyboards/spaceholdings/nebula68/info.json @@ -13,6 +13,9 @@ "driver": "pwm" }, "rgblight": { + "saturation_steps": 8, + "brightness_steps": 8, + "led_count": 10, "max_brightness": 210 }, "matrix_pins": { diff --git a/keyboards/spaceman/2_milk/config.h b/keyboards/spaceman/2_milk/config.h deleted file mode 100644 index 6a3ec9c5c1..0000000000 --- a/keyboards/spaceman/2_milk/config.h +++ /dev/null @@ -1,20 +0,0 @@ -/* Copyright 2019 Spaceman - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see <http://www.gnu.org/licenses/>. - */ -#pragma once - -#ifdef RGBLIGHT_ENABLE -#define RGBLED_NUM 1 -#endif diff --git a/keyboards/spaceman/2_milk/info.json b/keyboards/spaceman/2_milk/info.json index 333bad3b87..a703c8f890 100644 --- a/keyboards/spaceman/2_milk/info.json +++ b/keyboards/spaceman/2_milk/info.json @@ -8,6 +8,9 @@ "pid": "0x3225", "device_version": "0.0.1" }, + "rgblight": { + "led_count": 1 + }, "ws2812": { "pin": "B6" }, diff --git a/keyboards/spacetime/keymaps/kyleterry/keymap.c b/keyboards/spacetime/keymaps/kyleterry/keymap.c index fd91fafbd2..5aaab87814 100644 --- a/keyboards/spacetime/keymaps/kyleterry/keymap.c +++ b/keyboards/spacetime/keymaps/kyleterry/keymap.c @@ -98,22 +98,6 @@ layer_state_t layer_state_set_user(layer_state_t state) { return update_tri_layer_state(state, _LOWER, _RAISE, _ADJUST); } -bool process_record_user(uint16_t keycode, keyrecord_t *record) { - return true; -} - -void matrix_init_user(void) { - -} - -void matrix_scan_user(void) { - -} - -void led_set_user(uint8_t usb_led) { - -} - void td_common(tap_dance_state_t *state, void *user_data) { switch (state->count) { case 1: diff --git a/keyboards/splitkb/aurora/lily58/rev1/config.h b/keyboards/splitkb/aurora/lily58/rev1/config.h index 57a420d49c..1356c62ea1 100644 --- a/keyboards/splitkb/aurora/lily58/rev1/config.h +++ b/keyboards/splitkb/aurora/lily58/rev1/config.h @@ -28,7 +28,7 @@ // Not yet available in `info.json` #ifdef RGB_MATRIX_ENABLE -# define RGB_MATRIX_LED_COUNT RGBLED_NUM -# define RGB_MATRIX_SPLIT RGBLED_SPLIT +# define RGB_MATRIX_LED_COUNT 68 +# define RGB_MATRIX_SPLIT { 34, 34 } # define SPLIT_TRANSPORT_MIRROR #endif diff --git a/keyboards/splitkb/aurora/sweep/rev1/config.h b/keyboards/splitkb/aurora/sweep/rev1/config.h index aa5bd24fde..a3b2cc893e 100644 --- a/keyboards/splitkb/aurora/sweep/rev1/config.h +++ b/keyboards/splitkb/aurora/sweep/rev1/config.h @@ -28,7 +28,7 @@ // Not yet available in `info.json` #ifdef RGB_MATRIX_ENABLE -# define RGB_MATRIX_LED_COUNT RGBLED_NUM -# define RGB_MATRIX_SPLIT RGBLED_SPLIT +# define RGB_MATRIX_LED_COUNT 46 +# define RGB_MATRIX_SPLIT { 23, 23 } # define SPLIT_TRANSPORT_MIRROR #endif diff --git a/keyboards/splitkb/kyria/keymaps/cwebster2/keymap.c b/keyboards/splitkb/kyria/keymaps/cwebster2/keymap.c index 3a5aa429d5..e93857f4cc 100644 --- a/keyboards/splitkb/kyria/keymaps/cwebster2/keymap.c +++ b/keyboards/splitkb/kyria/keymaps/cwebster2/keymap.c @@ -384,10 +384,10 @@ static void render_status(void) { oled_write_P(PSTR("\n"), false); // Host Keyboard LED Status - uint8_t led_usb_state = host_keyboard_leds(); - oled_write_P(IS_LED_ON(led_usb_state, USB_LED_NUM_LOCK) ? PSTR("NUMLCK ") : PSTR(" "), false); - oled_write_P(IS_LED_ON(led_usb_state, USB_LED_CAPS_LOCK) ? PSTR("CAPLCK ") : PSTR(" "), false); - oled_write_P(IS_LED_ON(led_usb_state, USB_LED_SCROLL_LOCK) ? PSTR("SCRLCK ") : PSTR(" "), false); + led_t led_state = host_keyboard_led_state(); + oled_write_P(led_state.num_lock ? PSTR("NUMLCK ") : PSTR(" "), false); + oled_write_P(led_state.caps_lock ? PSTR("CAPLCK ") : PSTR(" "), false); + oled_write_P(led_state.scroll_lock ? PSTR("SCRLCK ") : PSTR(" "), false); } diff --git a/keyboards/splitkb/kyria/keymaps/lw/keymap.c b/keyboards/splitkb/kyria/keymaps/lw/keymap.c index 1ff1f54d05..8cc29c8463 100644 --- a/keyboards/splitkb/kyria/keymaps/lw/keymap.c +++ b/keyboards/splitkb/kyria/keymaps/lw/keymap.c @@ -52,8 +52,6 @@ const uint32_t unicode_map[] PROGMEM = { [SECTION] = 0x00A7, // § [DEGREE] = 0x00B0, // ° }; -// usage: X(ACUTE), XP(CEDIL,CEDIL_MAJ) - // clang-format off const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { @@ -74,7 +72,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { */ [_QWERTZ] = LAYOUT( KC_ESC, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Z, KC_U, KC_I, KC_O, KC_P, KC_DEL, - KC_TAB, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, XP(APOST,QUOTE), KC_BSPC, // XP(APOST,QUOTE) or KC_QUOT + KC_TAB, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, UP(APOST,QUOTE), KC_BSPC, // UP(APOST,QUOTE) or KC_QUOT KC_LSFT, KC_Y, KC_X, KC_C, KC_V, KC_B, KC_BSLS, KC_GRV, KC_LPRN, KC_RPRN, KC_N, KC_M, KC_COMM, KC_DOT, KC_SCLN, KC_CAPS, KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, MO(1), MO(2), SC_SENT, KC_MINS, KC_EXLM, KC_SLSH ), @@ -138,7 +136,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { [_NAV] = LAYOUT( _______, KC_BRIU, KC_MNXT, KC_MFFD, KC_MPLY, KC_VOLU, KC_HOME, KC_PGUP, KC_UP, KC_PGDN, _______, KC_DEL, _______, KC_BRID, KC_MPRV, KC_MRWD, KC_MSTP, KC_VOLD, KC_END, KC_LEFT, KC_DOWN, KC_RGHT, KC_SCRL, KC_BSPC, - KC_LSFT, US_ACUT, US_DGRV, US_DCIR, US_DIAE, KC_MUTE, _______, UC_NEXT, KC_RSFT, KC_APP, KC_PSCR, XP(CEDIL,CEDIL_MAJ), XP(SECTION,DEGREE), _______, LCTL(KC_S), KC_INS, + KC_LSFT, US_ACUT, US_DGRV, US_DCIR, US_DIAE, KC_MUTE, _______, UC_NEXT, KC_RSFT, KC_APP, KC_PSCR, UP(CEDIL,CEDIL_MAJ), UP(SECTION,DEGREE), _______, LCTL(KC_S), KC_INS, KC_LCTL, KC_LGUI, KC_LALT, _______, MO(1), MO(2), LCTL(KC_Z), LCTL(KC_X), LCTL(KC_C), LCTL(KC_V) ), diff --git a/keyboards/splitkb/kyria/keymaps/rmw/keymap.c b/keyboards/splitkb/kyria/keymaps/rmw/keymap.c index be7bfe4c7a..59b18de418 100644 --- a/keyboards/splitkb/kyria/keymaps/rmw/keymap.c +++ b/keyboards/splitkb/kyria/keymaps/rmw/keymap.c @@ -18,100 +18,60 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { - [QWERTY] = LAYOUT_stack( - KC_TAB , KC_Q, KC_W, KC_E, KC_R, KC_T, - OSL(EDIT), KC_A, LT(NUMPAD,KC_S), KC_D, LT(FSYM,KC_F), KC_G, - TD(FRBK2) , KC_Z, KC_X, KC_C, KC_V, KC_B, TO(EDIT), KC_ESCAPE, - TO(ADJUST), TD(SGCA), TD(AGC), KC_BSPC, TD(SHNTC), - - KC_Y, KC_U, KC_I, KC_O, KC_P, KC_BSLS, - KC_H, LT(JSYM,KC_J), KC_K, KC_L, LT(EDIT,KC_SCLN), KC_QUOT, - KC_DEL, TO(NUMPAD), KC_N, KC_M, KC_COMM, KC_DOT, LT(MEDIA,KC_SLSH), KC_MS_BTN1, - SFTENT, KC_SPC, TD(GCA), TD(CTLALL), KC_CAPS + [QWERTY] = LAYOUT_split_3x6_5( + KC_TAB , KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_BSLS, + OSL(EDIT), KC_A, LT(NUMPAD,KC_S), KC_D, LT(FSYM,KC_F), KC_G, KC_H, LT(JSYM,KC_J), KC_K, KC_L, LT(EDIT,KC_SCLN), KC_QUOT, + TD(FRBK2) , KC_Z, KC_X, KC_C, KC_V, KC_B, TO(EDIT), KC_ESCAPE, KC_DEL, TO(NUMPAD), KC_N, KC_M, KC_COMM, KC_DOT, LT(MEDIA,KC_SLSH), KC_MS_BTN1, + TO(ADJUST), TD(SGCA), TD(AGC), KC_BSPC, TD(SHNTC), SFTENT, KC_SPC, TD(GCA), TD(CTLALL), KC_CAPS ), - [MINIMAK4] = LAYOUT_stack( - KC_TAB , KC_Q, KC_W, KC_D, KC_R, KC_K, - OSL(EDIT), KC_A, LT(NUMPAD,KC_S), KC_T, LT(FSYM,KC_F), KC_G, - OSM(MOD_LSFT) , KC_Z, KC_X, KC_C, KC_V, KC_B, TO(EDIT), KC_ESCAPE, - _______, TO(ADJUST), TD(SGCA), KC_BSPC, TD(SHNTC), - - KC_Y, KC_U, KC_I, KC_O, KC_P, KC_PIPE, - KC_H, LT(JSYM,KC_J), KC_E, KC_L, LT(EDIT,KC_SCLN), KC_QUOT, - KC_DEL, TO(NUMPAD), KC_N, KC_M, KC_COMM, KC_DOT, LT(MEDIA,KC_SLSH), KC_MINS, - SFTENT, KC_SPC, TD(GCA), TD(CTLALL), _______ + [MINIMAK4] = LAYOUT_split_3x6_5( + KC_TAB , KC_Q, KC_W, KC_D, KC_R, KC_K, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_PIPE, + OSL(EDIT), KC_A, LT(NUMPAD,KC_S), KC_T, LT(FSYM,KC_F), KC_G, KC_H, LT(JSYM,KC_J), KC_E, KC_L, LT(EDIT,KC_SCLN), KC_QUOT, + OSM(MOD_LSFT) , KC_Z, KC_X, KC_C, KC_V, KC_B, TO(EDIT), KC_ESCAPE, KC_DEL, TO(NUMPAD), KC_N, KC_M, KC_COMM, KC_DOT, LT(MEDIA,KC_SLSH), KC_MINS, + _______, TO(ADJUST), TD(SGCA), KC_BSPC, TD(SHNTC), SFTENT, KC_SPC, TD(GCA), TD(CTLALL), _______ ), - [NUMPAD] = LAYOUT_stack( - _______, _______, _______, _______, _______, _______, - _______, _______, _______, _______, _______, _______, - _______, _______, _______, _______, _______, _______, TO(QWERTY), _______, - _______, _______, _______, _______ , _______, - - _______, KC_7, KC_8, KC_9, KC_KP_MINUS, _______, - _______, KC_4, KC_5, KC_6, KC_KP_PLUS , _______, - _______, TO(EDIT), _______, KC_1, KC_2, KC_3, KC_KP_SLASH, LCTL(KC_RIGHT), - _______, _______, KC_0, KC_DOT, _______ + [NUMPAD] = LAYOUT_split_3x6_5( + _______, _______, _______, _______, _______, _______, _______, KC_7, KC_8, KC_9, KC_KP_MINUS, _______, + _______, _______, _______, _______, _______, _______, _______, KC_4, KC_5, KC_6, KC_KP_PLUS , _______, + _______, _______, _______, _______, _______, _______, TO(QWERTY), _______, _______, TO(EDIT), _______, KC_1, KC_2, KC_3, KC_KP_SLASH, LCTL(KC_RIGHT), + _______, _______, _______, _______ , _______, _______, _______, KC_0, KC_DOT, _______ ), - [EDIT] = LAYOUT_stack( - _______, TASK_MAN, _______, SELW_LEFT, SELW_RIGHT, _______, - _______, _______ , LGUI(KC_GRV), MVW_LEFT, MVW_RIGHT , _______, - LCTL(KC_LEFT), R_UNDO, R_CUT , R_COPY , R_PASTE, R_REDO , TO(NUMPAD), FORM_GET, - _______, _______, _______, DEL_WRD, _______, - - NEW_TAB , KC_PGUP, KC_UP, KC_PGDN, KC_PSCR, _______, - R_HOME , KC_LEFT, KC_DOWN, KC_RIGHT, R_END, _______, - FORM_PUT, TO(QWERTY), SEL_HOME, S(KC_LEFT), S(KC_DOWN), S(KC_RIGHT), SEL_END, _______, - _______, _______, _______, _______, _______ + [EDIT] = LAYOUT_split_3x6_5( + _______, TASK_MAN, _______, SELW_LEFT, SELW_RIGHT, _______, NEW_TAB , KC_PGUP, KC_UP, KC_PGDN, KC_PSCR, _______, + _______, _______ , LGUI(KC_GRV), MVW_LEFT, MVW_RIGHT , _______, R_HOME , KC_LEFT, KC_DOWN, KC_RIGHT, R_END, _______, + LCTL(KC_LEFT), R_UNDO, R_CUT , R_COPY , R_PASTE, R_REDO , TO(NUMPAD), FORM_GET, FORM_PUT, TO(QWERTY), SEL_HOME, S(KC_LEFT), S(KC_DOWN), S(KC_RIGHT), SEL_END, _______, + _______, _______, _______, DEL_WRD, _______, _______, _______, _______, _______, _______ ), - [ADJUST] = LAYOUT_stack( - KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, - TO(QWERTY), TO(EDIT), TO(NUMPAD), TO(JSYM), TO(FSYM), TO(MEDIA), - DF(MINIMAK4), DF(QWERTY), RGB_SAD, RGB_HUD, RGB_VAD, RGB_RMOD,_______, _______, - _______, _______, _______, _______, _______, - - KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, - _______, _______, _______, _______, _______, _______, - _______, _______, _______, _______, _______, _______, _______, _______, - _______, _______, _______, _______, _______ + [ADJUST] = LAYOUT_split_3x6_5( + KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, + TO(QWERTY), TO(EDIT), TO(NUMPAD), TO(JSYM), TO(FSYM), TO(MEDIA), _______, _______, _______, _______, _______, _______, + DF(MINIMAK4), DF(QWERTY), RGB_SAD, RGB_HUD, RGB_VAD, RGB_RMOD,_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______ ), - [FSYM] = LAYOUT_stack( - _______, _______, _______, _______, _______, _______, - _______, _______, KC_TILD, KC_EXLM, _______, _______, - LCTL(KC_RIGHT), _______, TO(QWERTY), _______, _______, _______, _______, _______, - _______, _______, _______, _______, _______, - - KC_CIRC, KC_AMPR , KC_ASTR, KC_GRV , _______, _______, - KC_EQUAL, KC_MINUS, KC_UNDS, KC_PIPE, KC_COLON, KC_DQT, - _______, _______, _______, KC_PLUS, KC_BSLS, KC_SLSH, _______, _______, - _______, _______, _______, _______, _______ + [FSYM] = LAYOUT_split_3x6_5( + _______, _______, _______, _______, _______, _______, KC_CIRC, KC_AMPR , KC_ASTR, KC_GRV , _______, _______, + _______, _______, KC_TILD, KC_EXLM, _______, _______, KC_EQUAL, KC_MINUS, KC_UNDS, KC_PIPE, KC_COLON, KC_DQT, + LCTL(KC_RIGHT), _______, TO(QWERTY), _______, _______, _______, _______, _______, _______, _______, _______, KC_PLUS, KC_BSLS, KC_SLSH, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______ ), - [JSYM] = LAYOUT_stack( - _______, KC_GRV, KC_AT , KC_LCBR, KC_RCBR, _______, - _______, KC_HASH, KC_DLR , KC_LPRN, KC_RPRN, KC_LEFT, - _______, KC_PERC, KC_CIRC, KC_LBRC, KC_RBRC, _______, _______, _______, - _______, _______, _______, _______, _______, - - _______, _______, _______, _______, _______, _______, - _______, _______, KC_QUES, KC_SLSH, KC_COLON, _______, - _______, _______, _______, _______, _______, TO(QWERTY), _______, LCTL(KC_LEFT), - _______, _______, _______, _______, _______ + [JSYM] = LAYOUT_split_3x6_5( + _______, KC_GRV, KC_AT , KC_LCBR, KC_RCBR, _______, _______, _______, _______, _______, _______, _______, + _______, KC_HASH, KC_DLR , KC_LPRN, KC_RPRN, KC_LEFT, _______, _______, KC_QUES, KC_SLSH, KC_COLON, _______, + _______, KC_PERC, KC_CIRC, KC_LBRC, KC_RBRC, _______, _______, _______, _______, _______, _______, _______, _______, TO(QWERTY), _______, LCTL(KC_LEFT), + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______ ), - [MEDIA] = LAYOUT_stack( - _______, KC_WH_U, KC_WH_L, KC_MS_UP, KC_WH_R, _______, - _______, KC_WH_D, KC_MS_LEFT, KC_MS_DOWN, KC_MS_RIGHT, _______, - _______, _______, KC_ACL0, KC_ACL1, KC_ACL2, _______, _______, _______, - _______, _______, _______, _______, _______, - - _______, _______, _______, _______, _______, _______, - _______, _______, _______, _______, _______, _______, - _______, _______, _______, _______, KC_VOLD, KC_MUTE, KC_VOLU, _______, - KC_MS_BTN1, KC_MEDIA_PLAY_PAUSE, KC_MRWD, KC_MFFD, _______ + [MEDIA] = LAYOUT_split_3x6_5( + _______, KC_WH_U, KC_WH_L, KC_MS_UP, KC_WH_R, _______, _______, _______, _______, _______, _______, _______, + _______, KC_WH_D, KC_MS_LEFT, KC_MS_DOWN, KC_MS_RIGHT, _______, _______, _______, _______, _______, _______, _______, + _______, _______, KC_ACL0, KC_ACL1, KC_ACL2, _______, _______, _______, _______, _______, _______, _______, KC_VOLD, KC_MUTE, KC_VOLU, _______, + _______, _______, _______, _______, _______, KC_MS_BTN1, KC_MEDIA_PLAY_PAUSE, KC_MRWD, KC_MFFD, _______ ) }; diff --git a/keyboards/splitkb/kyria/keymaps/shinze/keymap.c b/keyboards/splitkb/kyria/keymaps/shinze/keymap.c index 3483410525..ecc70055b2 100644 --- a/keyboards/splitkb/kyria/keymaps/shinze/keymap.c +++ b/keyboards/splitkb/kyria/keymaps/shinze/keymap.c @@ -210,10 +210,10 @@ static void render_status(void) { } // Host Keyboard LED Status - uint8_t led_usb_state = host_keyboard_leds(); - oled_write_P(IS_LED_ON(led_usb_state, USB_LED_NUM_LOCK) ? PSTR("NUMLCK ") : PSTR(" "), false); - oled_write_P(IS_LED_ON(led_usb_state, USB_LED_CAPS_LOCK) ? PSTR("CAPLCK ") : PSTR(" "), false); - oled_write_P(IS_LED_ON(led_usb_state, USB_LED_SCROLL_LOCK) ? PSTR("SCRLCK ") : PSTR(" "), false); + led_t led_state = host_keyboard_led_state(); + oled_write_P(led_state.num_lock ? PSTR("NUMLCK ") : PSTR(" "), false); + oled_write_P(led_state.caps_lock ? PSTR("CAPLCK ") : PSTR(" "), false); + oled_write_P(led_state.scroll_lock ? PSTR("SCRLCK ") : PSTR(" "), false); } bool oled_task_user(void) { diff --git a/keyboards/splitkb/kyria/keymaps/tessachka/keymap.c b/keyboards/splitkb/kyria/keymaps/tessachka/keymap.c index 6720a6b35c..87f51c4cd3 100644 --- a/keyboards/splitkb/kyria/keymaps/tessachka/keymap.c +++ b/keyboards/splitkb/kyria/keymaps/tessachka/keymap.c @@ -225,10 +225,10 @@ static void render_status(void) { } // Host Keyboard LED Status - uint8_t led_usb_state = host_keyboard_leds(); - oled_write_P(IS_LED_ON(led_usb_state, USB_LED_NUM_LOCK) ? PSTR("NUMLCK ") : PSTR(" "), false); - oled_write_P(IS_LED_ON(led_usb_state, USB_LED_CAPS_LOCK) ? PSTR("CAPLCK ") : PSTR(" "), false); - oled_write_P(IS_LED_ON(led_usb_state, USB_LED_SCROLL_LOCK) ? PSTR("SCRLCK ") : PSTR(" "), false); + led_t led_state = host_keyboard_led_state(); + oled_write_P(led_state.num_lock ? PSTR("NUMLCK ") : PSTR(" "), false); + oled_write_P(led_state.caps_lock ? PSTR("CAPLCK ") : PSTR(" "), false); + oled_write_P(led_state.scroll_lock ? PSTR("SCRLCK ") : PSTR(" "), false); } bool oled_task_user(void) { diff --git a/keyboards/splitkb/kyria/keymaps/thomasbaart/keymap.c b/keyboards/splitkb/kyria/keymaps/thomasbaart/keymap.c index 3ed7dbee6e..14ce1b1a6e 100644 --- a/keyboards/splitkb/kyria/keymaps/thomasbaart/keymap.c +++ b/keyboards/splitkb/kyria/keymaps/thomasbaart/keymap.c @@ -286,10 +286,10 @@ static void render_status(void) { } // Host Keyboard LED Status - uint8_t led_usb_state = host_keyboard_leds(); - oled_write_P(IS_LED_ON(led_usb_state, USB_LED_NUM_LOCK) ? PSTR("NUMLCK ") : PSTR(" "), false); - oled_write_P(IS_LED_ON(led_usb_state, USB_LED_CAPS_LOCK) ? PSTR("CAPLCK ") : PSTR(" "), false); - oled_write_P(IS_LED_ON(led_usb_state, USB_LED_SCROLL_LOCK) ? PSTR("SCRLCK ") : PSTR(" "), false); + led_t led_state = host_keyboard_led_state(); + oled_write_P(led_state.num_lock ? PSTR("NUMLCK ") : PSTR(" "), false); + oled_write_P(led_state.caps_lock ? PSTR("CAPLCK ") : PSTR(" "), false); + oled_write_P(led_state.scroll_lock ? PSTR("SCRLCK ") : PSTR(" "), false); } bool oled_task_user(void) { diff --git a/keyboards/splitkb/kyria/keymaps/uqs/keymap.c b/keyboards/splitkb/kyria/keymaps/uqs/keymap.c index 9d3d6d1f66..398b167e72 100644 --- a/keyboards/splitkb/kyria/keymaps/uqs/keymap.c +++ b/keyboards/splitkb/kyria/keymaps/uqs/keymap.c @@ -22,16 +22,11 @@ R45, R46, R47, \ R32, R33 \ ) \ -LAYOUT_stack( \ - L00, L01, L02, L03, L04, L05, \ - L12, L13, L14, L15, L16, L17, \ - L24, L25, L26, L27, L28, L29, L30, L31, \ - L40, L41, L42, L43, L44, \ - \ - R06, R07, R08, R09, R10, R11, \ - R18, R19, R20, R21, R22, R23, \ - R32, R33, R34, R35, R36, R37, R38, R39, \ - R45, R46, R47, R48, R49 \ +LAYOUT_split_3x6_5( \ + L00, L01, L02, L03, L04, L05, R06, R07, R08, R09, R10, R11, \ + L12, L13, L14, L15, L16, L17, R18, R19, R20, R21, R22, R23, \ + L24, L25, L26, L27, L28, L29, L30, L31, R32, R33, R34, R35, R36, R37, R38, R39, \ + L40, L41, L42, L43, L44, R45, R46, R47, R48, R49 \ ) // clang-format off diff --git a/keyboards/splitkb/kyria/rev1/config.h b/keyboards/splitkb/kyria/rev1/config.h index 3f7655d431..6c21b12a84 100644 --- a/keyboards/splitkb/kyria/rev1/config.h +++ b/keyboards/splitkb/kyria/rev1/config.h @@ -41,10 +41,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. # define SOFT_SERIAL_PIN D2 #endif -#define RGBLED_SPLIT \ - { 10, 10 } -#define RGBLED_NUM 20 - #ifdef OLED_ENABLE # define OLED_DISPLAY_128X64 # define SPLIT_OLED_ENABLE @@ -53,7 +49,7 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. /* RGB matrix support */ #ifdef RGB_MATRIX_ENABLE # define SPLIT_TRANSPORT_MIRROR -# define RGB_MATRIX_LED_COUNT RGBLED_NUM // Number of LEDs +# define RGB_MATRIX_LED_COUNT 20 // Number of LEDs # define RGB_MATRIX_SPLIT { 10, 10 } # define RGB_MATRIX_MAXIMUM_BRIGHTNESS 170 # define RGB_DISABLE_WHEN_USB_SUSPENDED diff --git a/keyboards/splitkb/kyria/rev1/info.json b/keyboards/splitkb/kyria/rev1/info.json index 2e380145a0..cf849b0430 100644 --- a/keyboards/splitkb/kyria/rev1/info.json +++ b/keyboards/splitkb/kyria/rev1/info.json @@ -4,6 +4,10 @@ "pid": "0x9D9D", "device_version": "0.0.1" }, + "rgblight": { + "led_count": 20, + "split_count": [10, 10] + }, "rgb_matrix": { "driver": "WS2812" }, @@ -90,67 +94,6 @@ {"matrix": [7, 3], "x": 12, "y": 3.25}, {"matrix": [7, 4], "x": 13, "y": 3.25} ] - }, - "LAYOUT_stack": { - "layout": [ - {"matrix": [0, 7], "x": 0, "y": 0}, - {"matrix": [0, 6], "x": 1, "y": 0}, - {"matrix": [0, 5], "x": 2, "y": 0}, - {"matrix": [0, 4], "x": 3, "y": 0}, - {"matrix": [0, 3], "x": 4, "y": 0}, - {"matrix": [0, 2], "x": 5, "y": 0}, - - {"matrix": [1, 7], "x": 6, "y": 0}, - {"matrix": [1, 6], "x": 7, "y": 0}, - {"matrix": [1, 5], "x": 8, "y": 0}, - {"matrix": [1, 4], "x": 9, "y": 0}, - {"matrix": [1, 3], "x": 10, "y": 0}, - {"matrix": [1, 2], "x": 11, "y": 0}, - - {"matrix": [2, 7], "x": 12, "y": 0}, - {"matrix": [2, 6], "x": 13, "y": 0}, - {"matrix": [2, 5], "x": 14, "y": 0}, - {"matrix": [2, 4], "x": 15, "y": 0}, - {"matrix": [2, 3], "x": 16, "y": 0}, - {"matrix": [2, 2], "x": 17, "y": 0}, - {"matrix": [2, 1], "x": 18, "y": 0}, - {"matrix": [2, 0], "x": 19, "y": 0}, - - {"matrix": [3, 4], "x": 20, "y": 0}, - {"matrix": [3, 3], "x": 21, "y": 0}, - {"matrix": [3, 2], "x": 22, "y": 0}, - {"matrix": [3, 1], "x": 23, "y": 0}, - {"matrix": [3, 0], "x": 24, "y": 0}, - - {"matrix": [4, 2], "x": 25, "y": 0}, - {"matrix": [4, 3], "x": 26, "y": 0}, - {"matrix": [4, 4], "x": 27, "y": 0}, - {"matrix": [4, 5], "x": 28, "y": 0}, - {"matrix": [4, 6], "x": 29, "y": 0}, - {"matrix": [4, 7], "x": 30, "y": 0}, - - {"matrix": [5, 2], "x": 31, "y": 0}, - {"matrix": [5, 3], "x": 32, "y": 0}, - {"matrix": [5, 4], "x": 33, "y": 0}, - {"matrix": [5, 5], "x": 34, "y": 0}, - {"matrix": [5, 6], "x": 35, "y": 0}, - {"matrix": [5, 7], "x": 36, "y": 0}, - - {"matrix": [6, 0], "x": 37, "y": 0}, - {"matrix": [6, 1], "x": 38, "y": 0}, - {"matrix": [6, 2], "x": 39, "y": 0}, - {"matrix": [6, 3], "x": 40, "y": 0}, - {"matrix": [6, 4], "x": 41, "y": 0}, - {"matrix": [6, 5], "x": 42, "y": 0}, - {"matrix": [6, 6], "x": 43, "y": 0}, - {"matrix": [6, 7], "x": 44, "y": 0}, - - {"matrix": [7, 0], "x": 45, "y": 0}, - {"matrix": [7, 1], "x": 46, "y": 0}, - {"matrix": [7, 2], "x": 47, "y": 0}, - {"matrix": [7, 3], "x": 48, "y": 0}, - {"matrix": [7, 4], "x": 49, "y": 0} - ] } } } diff --git a/keyboards/splitkb/kyria/rev2/config.h b/keyboards/splitkb/kyria/rev2/config.h index 1e8dd02727..198688772b 100644 --- a/keyboards/splitkb/kyria/rev2/config.h +++ b/keyboards/splitkb/kyria/rev2/config.h @@ -47,10 +47,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. # define SOFT_SERIAL_PIN D2 #endif -#define RGBLED_SPLIT \ - { 10, 10 } -#define RGBLED_NUM 20 - #ifdef OLED_ENABLE # define OLED_DISPLAY_128X64 # define SPLIT_OLED_ENABLE @@ -59,7 +55,7 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. /* RGB matrix support */ #ifdef RGB_MATRIX_ENABLE # define SPLIT_TRANSPORT_MIRROR -# define RGB_MATRIX_LED_COUNT RGBLED_NUM // Number of LEDs +# define RGB_MATRIX_LED_COUNT 20 // Number of LEDs # define RGB_MATRIX_SPLIT { 10, 10 } # define RGB_MATRIX_MAXIMUM_BRIGHTNESS 170 # define RGB_DISABLE_WHEN_USB_SUSPENDED diff --git a/keyboards/splitkb/kyria/rev2/info.json b/keyboards/splitkb/kyria/rev2/info.json index 9b745dc906..b498147ffd 100644 --- a/keyboards/splitkb/kyria/rev2/info.json +++ b/keyboards/splitkb/kyria/rev2/info.json @@ -4,6 +4,10 @@ "pid": "0x9D9D", "device_version": "0.0.2" }, + "rgblight": { + "led_count": 20, + "split_count": [10, 10] + }, "rgb_matrix": { "driver": "WS2812" }, @@ -33,10 +37,10 @@ } }, "layout_aliases": { - "LAYOUT_split_3x6_5": "LAYOUT" + "LAYOUT": "LAYOUT_split_3x6_5" }, "layouts": { - "LAYOUT": { + "LAYOUT_split_3x6_5": { "layout": [ {"matrix": [0, 7], "x": 0, "y": 0.75}, {"matrix": [0, 6], "x": 1, "y": 0.75}, @@ -96,67 +100,6 @@ {"matrix": [7, 3], "x": 12, "y": 3.25}, {"matrix": [7, 5], "x": 13, "y": 3.25} ] - }, - "LAYOUT_stack": { - "layout": [ - {"matrix": [0, 7], "x": 0, "y": 0}, - {"matrix": [0, 6], "x": 1, "y": 0}, - {"matrix": [0, 5], "x": 2, "y": 0}, - {"matrix": [0, 4], "x": 3, "y": 0}, - {"matrix": [0, 3], "x": 4, "y": 0}, - {"matrix": [0, 2], "x": 5, "y": 0}, - - {"matrix": [1, 7], "x": 6, "y": 0}, - {"matrix": [1, 6], "x": 7, "y": 0}, - {"matrix": [1, 5], "x": 8, "y": 0}, - {"matrix": [1, 4], "x": 9, "y": 0}, - {"matrix": [1, 3], "x": 10, "y": 0}, - {"matrix": [1, 2], "x": 11, "y": 0}, - - {"matrix": [2, 7], "x": 12, "y": 0}, - {"matrix": [2, 6], "x": 13, "y": 0}, - {"matrix": [2, 5], "x": 14, "y": 0}, - {"matrix": [2, 4], "x": 15, "y": 0}, - {"matrix": [2, 3], "x": 16, "y": 0}, - {"matrix": [2, 2], "x": 17, "y": 0}, - {"matrix": [2, 1], "x": 18, "y": 0}, - {"matrix": [2, 0], "x": 19, "y": 0}, - - {"matrix": [3, 5], "x": 20, "y": 0}, - {"matrix": [3, 3], "x": 21, "y": 0}, - {"matrix": [3, 2], "x": 22, "y": 0}, - {"matrix": [3, 1], "x": 23, "y": 0}, - {"matrix": [3, 0], "x": 24, "y": 0}, - - {"matrix": [4, 2], "x": 25, "y": 0}, - {"matrix": [4, 3], "x": 26, "y": 0}, - {"matrix": [4, 4], "x": 27, "y": 0}, - {"matrix": [4, 5], "x": 28, "y": 0}, - {"matrix": [4, 6], "x": 29, "y": 0}, - {"matrix": [4, 7], "x": 30, "y": 0}, - - {"matrix": [5, 2], "x": 31, "y": 0}, - {"matrix": [5, 3], "x": 32, "y": 0}, - {"matrix": [5, 4], "x": 33, "y": 0}, - {"matrix": [5, 5], "x": 34, "y": 0}, - {"matrix": [5, 6], "x": 35, "y": 0}, - {"matrix": [5, 7], "x": 36, "y": 0}, - - {"matrix": [6, 0], "x": 37, "y": 0}, - {"matrix": [6, 1], "x": 38, "y": 0}, - {"matrix": [6, 2], "x": 39, "y": 0}, - {"matrix": [6, 3], "x": 40, "y": 0}, - {"matrix": [6, 4], "x": 41, "y": 0}, - {"matrix": [6, 5], "x": 42, "y": 0}, - {"matrix": [6, 6], "x": 43, "y": 0}, - {"matrix": [6, 7], "x": 44, "y": 0}, - - {"matrix": [7, 0], "x": 45, "y": 0}, - {"matrix": [7, 1], "x": 46, "y": 0}, - {"matrix": [7, 2], "x": 47, "y": 0}, - {"matrix": [7, 3], "x": 48, "y": 0}, - {"matrix": [7, 5], "x": 49, "y": 0} - ] } } } diff --git a/keyboards/splitkb/kyria/rev3/config.h b/keyboards/splitkb/kyria/rev3/config.h index 3c620d9019..5168e8678e 100644 --- a/keyboards/splitkb/kyria/rev3/config.h +++ b/keyboards/splitkb/kyria/rev3/config.h @@ -28,7 +28,7 @@ // Not yet available in `info.json` #ifdef RGB_MATRIX_ENABLE -# define RGB_MATRIX_LED_COUNT RGBLED_NUM -# define RGB_MATRIX_SPLIT RGBLED_SPLIT +# define RGB_MATRIX_LED_COUNT 62 +# define RGB_MATRIX_SPLIT { 31, 31 } # define SPLIT_TRANSPORT_MIRROR #endif diff --git a/keyboards/splitkb/kyria/rev3/info.json b/keyboards/splitkb/kyria/rev3/info.json index 97b953534d..a6f6d8df0f 100644 --- a/keyboards/splitkb/kyria/rev3/info.json +++ b/keyboards/splitkb/kyria/rev3/info.json @@ -16,8 +16,11 @@ "oled": true, "rgb_matrix": true }, + "layout_aliases": { + "LAYOUT": "LAYOUT_split_3x6_5" + }, "layouts": { - "LAYOUT": { + "LAYOUT_split_3x6_5": { "layout": [ {"label": "L06", "matrix": [0, 6], "x": 0, "y": 0.75}, {"label": "L05", "matrix": [0, 5], "x": 1, "y": 0.75}, @@ -25,6 +28,7 @@ {"label": "L03", "matrix": [0, 3], "x": 3, "y": 0}, {"label": "L02", "matrix": [0, 2], "x": 4, "y": 0.25}, {"label": "L01", "matrix": [0, 1], "x": 5, "y": 0.5}, + {"label": "R01", "matrix": [4, 1], "x": 10.5, "y": 0.5}, {"label": "R02", "matrix": [4, 2], "x": 11.5, "y": 0.25}, {"label": "R03", "matrix": [4, 3], "x": 12.5, "y": 0}, @@ -38,6 +42,7 @@ {"label": "L09", "matrix": [1, 3], "x": 3, "y": 1}, {"label": "L08", "matrix": [1, 2], "x": 4, "y": 1.25}, {"label": "L07", "matrix": [1, 1], "x": 5, "y": 1.5}, + {"label": "R07", "matrix": [5, 1], "x": 10.5, "y": 1.5}, {"label": "R08", "matrix": [5, 2], "x": 11.5, "y": 1.25}, {"label": "R09", "matrix": [5, 3], "x": 12.5, "y": 1}, @@ -53,6 +58,7 @@ {"label": "L15", "matrix": [2, 1], "x": 5, "y": 2.5}, {"label": "L14", "matrix": [3, 3], "x": 6, "y": 3}, {"label": "L13", "matrix": [2, 0], "x": 7, "y": 3.25}, + {"label": "R13", "matrix": [6, 0], "x": 8.5, "y": 3.25}, {"label": "R14", "matrix": [7, 3], "x": 9.5, "y": 3}, {"label": "R15", "matrix": [6, 1], "x": 10.5, "y": 2.5}, @@ -67,66 +73,6 @@ {"label": "L23", "matrix": [3, 1], "x": 4.5, "y": 3.5}, {"label": "L22", "matrix": [3, 5], "x": 5.5, "y": 4}, {"label": "L21", "matrix": [3, 0], "x": 6.5, "y": 4.25}, - {"label": "R21", "matrix": [7, 0], "x": 9, "y": 4.25}, - {"label": "R22", "matrix": [7, 5], "x": 10, "y": 4}, - {"label": "R23", "matrix": [7, 1], "x": 11, "y": 3.5}, - {"label": "R24", "matrix": [7, 2], "x": 12, "y": 3.25}, - {"label": "R25", "matrix": [7, 4], "x": 13, "y": 3.25} - ] - }, - "LAYOUT_stack": { - "layout": [ - {"label": "L06", "matrix": [0, 6], "x": 0, "y": 0.75}, - {"label": "L05", "matrix": [0, 5], "x": 1, "y": 0.75}, - {"label": "L04", "matrix": [0, 4], "x": 2, "y": 0.25}, - {"label": "L03", "matrix": [0, 3], "x": 3, "y": 0}, - {"label": "L02", "matrix": [0, 2], "x": 4, "y": 0.25}, - {"label": "L01", "matrix": [0, 1], "x": 5, "y": 0.5}, - - {"label": "L12", "matrix": [1, 6], "x": 0, "y": 1.75}, - {"label": "L11", "matrix": [1, 5], "x": 1, "y": 1.75}, - {"label": "L10", "matrix": [1, 4], "x": 2, "y": 1.25}, - {"label": "L09", "matrix": [1, 3], "x": 3, "y": 1}, - {"label": "L08", "matrix": [1, 2], "x": 4, "y": 1.25}, - {"label": "L07", "matrix": [1, 1], "x": 5, "y": 1.5}, - - {"label": "L20", "matrix": [2, 6], "x": 0, "y": 2.75}, - {"label": "L19", "matrix": [2, 5], "x": 1, "y": 2.75}, - {"label": "L18", "matrix": [2, 4], "x": 2, "y": 2.25}, - {"label": "L17", "matrix": [2, 3], "x": 3, "y": 2}, - {"label": "L16", "matrix": [2, 2], "x": 4, "y": 2.25}, - {"label": "L15", "matrix": [2, 1], "x": 5, "y": 2.5}, - {"label": "L14", "matrix": [3, 3], "x": 6, "y": 3}, - {"label": "L13", "matrix": [2, 0], "x": 7, "y": 3.25}, - - {"label": "L25", "matrix": [3, 4], "x": 2.5, "y": 3.25}, - {"label": "L24", "matrix": [3, 2], "x": 3.5, "y": 3.25}, - {"label": "L23", "matrix": [3, 1], "x": 4.5, "y": 3.5}, - {"label": "L22", "matrix": [3, 5], "x": 5.5, "y": 4}, - {"label": "L21", "matrix": [3, 0], "x": 6.5, "y": 4.25}, - - {"label": "R01", "matrix": [4, 1], "x": 10.5, "y": 0.5}, - {"label": "R02", "matrix": [4, 2], "x": 11.5, "y": 0.25}, - {"label": "R03", "matrix": [4, 3], "x": 12.5, "y": 0}, - {"label": "R04", "matrix": [4, 4], "x": 13.5, "y": 0.25}, - {"label": "R05", "matrix": [4, 5], "x": 14.5, "y": 0.75}, - {"label": "R06", "matrix": [4, 6], "x": 15.5, "y": 0.75}, - - {"label": "R07", "matrix": [5, 1], "x": 10.5, "y": 1.5}, - {"label": "R08", "matrix": [5, 2], "x": 11.5, "y": 1.25}, - {"label": "R09", "matrix": [5, 3], "x": 12.5, "y": 1}, - {"label": "R10", "matrix": [5, 4], "x": 13.5, "y": 1.25}, - {"label": "R11", "matrix": [5, 5], "x": 14.5, "y": 1.75}, - {"label": "R12", "matrix": [5, 6], "x": 15.5, "y": 1.75}, - - {"label": "R13", "matrix": [6, 0], "x": 8.5, "y": 3.25}, - {"label": "R14", "matrix": [7, 3], "x": 9.5, "y": 3}, - {"label": "R15", "matrix": [6, 1], "x": 10.5, "y": 2.5}, - {"label": "R16", "matrix": [6, 2], "x": 11.5, "y": 2.25}, - {"label": "R17", "matrix": [6, 3], "x": 12.5, "y": 2}, - {"label": "R18", "matrix": [6, 4], "x": 13.5, "y": 2.25}, - {"label": "R19", "matrix": [6, 5], "x": 14.5, "y": 2.75}, - {"label": "R20", "matrix": [6, 6], "x": 15.5, "y": 2.75}, {"label": "R21", "matrix": [7, 0], "x": 9, "y": 4.25}, {"label": "R22", "matrix": [7, 5], "x": 10, "y": 4}, diff --git a/keyboards/splitkb/zima/config.h b/keyboards/splitkb/zima/config.h index fca70ae030..21fc2a2609 100644 --- a/keyboards/splitkb/zima/config.h +++ b/keyboards/splitkb/zima/config.h @@ -21,11 +21,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #define AUDIO_CLICKY #define NO_MUSIC_MODE -#define RGBLED_NUM 5 -#define RGBLIGHT_HUE_STEP 8 -#define RGBLIGHT_SAT_STEP 8 -#define RGBLIGHT_VAL_STEP 8 -#define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */ #define RGBLIGHT_EFFECT_BREATHING #define RGBLIGHT_EFFECT_RAINBOW_MOOD #define RGBLIGHT_EFFECT_RAINBOW_SWIRL diff --git a/keyboards/splitkb/zima/info.json b/keyboards/splitkb/zima/info.json index 6cb53f372f..f017905224 100644 --- a/keyboards/splitkb/zima/info.json +++ b/keyboards/splitkb/zima/info.json @@ -8,6 +8,12 @@ "pid": "0xF75B", "device_version": "0.0.1" }, + "rgblight": { + "saturation_steps": 8, + "brightness_steps": 8, + "led_count": 5, + "sleep": true + }, "ws2812": { "pin": "B5" }, diff --git a/keyboards/star75/config.h b/keyboards/star75/config.h index 980009fe0b..e2395f0dd5 100644 --- a/keyboards/star75/config.h +++ b/keyboards/star75/config.h @@ -19,10 +19,5 @@ SPDX-License-Identifier: GPL-2.0-or-later */ #define RGBLIGHT_EFFECT_RGB_TEST #define RGBLIGHT_EFFECT_ALTERNATING #define RGBLIGHT_EFFECT_TWINKLE -#define RGBLED_NUM 1 #define RGBLIGHT_LAYERS -#define RGBLIGHT_LED_MAP { 0, 1 } -#define RGBLIGHT_HUE_STEP 8 -#define RGBLIGHT_SAT_STEP 8 -#define RGBLIGHT_VAL_STEP 8 #define RGBLIGHT_LAYERS_OVERRIDE_RGB_OFF diff --git a/keyboards/star75/info.json b/keyboards/star75/info.json index c6368ca568..53ff787c99 100644 --- a/keyboards/star75/info.json +++ b/keyboards/star75/info.json @@ -12,6 +12,9 @@ "pin": "B3" }, "rgblight": { + "saturation_steps": 8, + "brightness_steps": 8, + "led_count": 1, "max_brightness": 180 }, "matrix_pins": { diff --git a/keyboards/stello65/beta/beta.c b/keyboards/stello65/beta/beta.c deleted file mode 100644 index fa19135814..0000000000 --- a/keyboards/stello65/beta/beta.c +++ /dev/null @@ -1,18 +0,0 @@ -// Copyright 2021 @wekey (@@wekey) -// SPDX-License-Identifier: GPL-2.0-or-later - -#include "quantum.h" - -#if defined(ENCODER_ENABLE) -bool encoder_update_kb(uint8_t index, bool clockwise) { - if (!encoder_update_user(index, clockwise)) { return false; } - if (index == 0) { - if (clockwise) { - tap_code_delay(KC_VOLU, 10); - } else { - tap_code_delay(KC_VOLD, 10); - } - } - return true; -} -#endif diff --git a/keyboards/stello65/hs_rev1/config.h b/keyboards/stello65/hs_rev1/config.h index 88bc32e8ae..45cbc7b166 100644 --- a/keyboards/stello65/hs_rev1/config.h +++ b/keyboards/stello65/hs_rev1/config.h @@ -3,11 +3,6 @@ #pragma once -# define RGBLED_NUM 4 -//# define RGBLIGHT_HUE_STEP 8 -//# define RGBLIGHT_SAT_STEP 8 -//# define RGBLIGHT_VAL_STEP 8 -//# define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */ /*== all animations enable ==*/ #define RGBLIGHT_EFFECT_BREATHING #define RGBLIGHT_EFFECT_RAINBOW_MOOD diff --git a/keyboards/stello65/hs_rev1/info.json b/keyboards/stello65/hs_rev1/info.json index 5b426cfa09..b1dd258e63 100644 --- a/keyboards/stello65/hs_rev1/info.json +++ b/keyboards/stello65/hs_rev1/info.json @@ -8,6 +8,9 @@ "pid": "0x0004", "device_version": "0.0.1" }, + "rgblight": { + "led_count": 4 + }, "ws2812": { "pin": "D0" }, diff --git a/keyboards/stello65/sl_rev1/config.h b/keyboards/stello65/sl_rev1/config.h index 88bc32e8ae..45cbc7b166 100644 --- a/keyboards/stello65/sl_rev1/config.h +++ b/keyboards/stello65/sl_rev1/config.h @@ -3,11 +3,6 @@ #pragma once -# define RGBLED_NUM 4 -//# define RGBLIGHT_HUE_STEP 8 -//# define RGBLIGHT_SAT_STEP 8 -//# define RGBLIGHT_VAL_STEP 8 -//# define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */ /*== all animations enable ==*/ #define RGBLIGHT_EFFECT_BREATHING #define RGBLIGHT_EFFECT_RAINBOW_MOOD diff --git a/keyboards/stello65/sl_rev1/info.json b/keyboards/stello65/sl_rev1/info.json index 36ae919171..f58c86d9ae 100644 --- a/keyboards/stello65/sl_rev1/info.json +++ b/keyboards/stello65/sl_rev1/info.json @@ -8,6 +8,9 @@ "pid": "0x0005", "device_version": "0.0.1" }, + "rgblight": { + "led_count": 4 + }, "ws2812": { "pin": "B7" }, diff --git a/keyboards/stratos/config.h b/keyboards/stratos/config.h index 0dfaee1d90..d23e4768e1 100644 --- a/keyboards/stratos/config.h +++ b/keyboards/stratos/config.h @@ -19,11 +19,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. /* RGB LEDs */ #ifdef RGBLIGHT_ENABLE -#define RGBLED_NUM 14 -#define RGBLIGHT_HUE_STEP 8 -#define RGBLIGHT_SAT_STEP 8 -#define RGBLIGHT_VAL_STEP 8 -#define RGBLIGHT_SLEEP #define RGBLIGHT_EFFECT_BREATHING #define RGBLIGHT_EFFECT_RAINBOW_MOOD #define RGBLIGHT_EFFECT_RAINBOW_SWIRL diff --git a/keyboards/stratos/info.json b/keyboards/stratos/info.json index c44e46a1f9..479dd76078 100644 --- a/keyboards/stratos/info.json +++ b/keyboards/stratos/info.json @@ -12,7 +12,11 @@ "pin": "D2" }, "rgblight": { - "max_brightness": 200 + "saturation_steps": 8, + "brightness_steps": 8, + "led_count": 14, + "max_brightness": 200, + "sleep": true }, "matrix_pins": { "cols": ["F4", "F7", "F5", "F6", "C7", "C6", "B6", "B5", "B4", "D7", "D6", "D4", "D5", "D3"], diff --git a/keyboards/studiokestra/bourgeau/config.h b/keyboards/studiokestra/bourgeau/config.h index 04f426d913..f4ede5dacf 100644 --- a/keyboards/studiokestra/bourgeau/config.h +++ b/keyboards/studiokestra/bourgeau/config.h @@ -17,11 +17,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #pragma once - #define RGBLED_NUM 24 - #define RGBLIGHT_HUE_STEP 8 - #define RGBLIGHT_SAT_STEP 8 - #define RGBLIGHT_VAL_STEP 8 - #define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */ /*== all animations enable ==*/ #define RGBLIGHT_EFFECT_BREATHING #define RGBLIGHT_EFFECT_RAINBOW_MOOD diff --git a/keyboards/studiokestra/bourgeau/info.json b/keyboards/studiokestra/bourgeau/info.json index 835b0e60a8..8c9fc1586c 100644 --- a/keyboards/studiokestra/bourgeau/info.json +++ b/keyboards/studiokestra/bourgeau/info.json @@ -8,6 +8,12 @@ "pid": "0x7501", "device_version": "0.0.1" }, + "rgblight": { + "saturation_steps": 8, + "brightness_steps": 8, + "led_count": 24, + "sleep": true + }, "ws2812": { "pin": "B7" }, diff --git a/keyboards/studiokestra/cascade/config.h b/keyboards/studiokestra/cascade/config.h index 12337a485d..90f135d7d3 100644 --- a/keyboards/studiokestra/cascade/config.h +++ b/keyboards/studiokestra/cascade/config.h @@ -17,11 +17,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #pragma once - #define RGBLED_NUM 16 - #define RGBLIGHT_HUE_STEP 8 - #define RGBLIGHT_SAT_STEP 8 - #define RGBLIGHT_VAL_STEP 8 - #define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */ #define RGBLIGHT_EFFECT_BREATHING #define RGBLIGHT_EFFECT_RAINBOW_MOOD #define RGBLIGHT_EFFECT_RAINBOW_SWIRL diff --git a/keyboards/studiokestra/cascade/info.json b/keyboards/studiokestra/cascade/info.json index 3f48e07c1f..200db6a0d2 100644 --- a/keyboards/studiokestra/cascade/info.json +++ b/keyboards/studiokestra/cascade/info.json @@ -8,6 +8,12 @@ "pid": "0x6001", "device_version": "0.0.1" }, + "rgblight": { + "saturation_steps": 8, + "brightness_steps": 8, + "led_count": 16, + "sleep": true + }, "ws2812": { "pin": "B0" }, diff --git a/keyboards/studiokestra/frl84/config.h b/keyboards/studiokestra/frl84/config.h index df0bf3307b..1d75891212 100644 --- a/keyboards/studiokestra/frl84/config.h +++ b/keyboards/studiokestra/frl84/config.h @@ -3,11 +3,6 @@ #pragma once -#define RGBLED_NUM 18 -#define RGBLIGHT_HUE_STEP 8 -#define RGBLIGHT_SAT_STEP 8 -#define RGBLIGHT_VAL_STEP 8 -#define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */ #define RGBLIGHT_EFFECT_BREATHING #define RGBLIGHT_EFFECT_RAINBOW_MOOD #define RGBLIGHT_EFFECT_RAINBOW_SWIRL diff --git a/keyboards/studiokestra/frl84/info.json b/keyboards/studiokestra/frl84/info.json index af0e340783..e28e5be7fa 100644 --- a/keyboards/studiokestra/frl84/info.json +++ b/keyboards/studiokestra/frl84/info.json @@ -21,7 +21,11 @@ "pin": "B0" }, "rgblight": { - "max_brightness": 200 + "saturation_steps": 8, + "brightness_steps": 8, + "led_count": 18, + "max_brightness": 200, + "sleep": true }, "processor": "atmega32u4", "url": "", diff --git a/keyboards/studiokestra/galatea/rev2/config.h b/keyboards/studiokestra/galatea/rev2/config.h index 7199179a4d..c7a2fb8f48 100644 --- a/keyboards/studiokestra/galatea/rev2/config.h +++ b/keyboards/studiokestra/galatea/rev2/config.h @@ -3,11 +3,6 @@ #pragma once -#define RGBLED_NUM 24 -#define RGBLIGHT_HUE_STEP 8 -#define RGBLIGHT_SAT_STEP 8 -#define RGBLIGHT_VAL_STEP 8 -#define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */ #define RGBLIGHT_EFFECT_BREATHING #define RGBLIGHT_EFFECT_RAINBOW_MOOD #define RGBLIGHT_EFFECT_RAINBOW_SWIRL diff --git a/keyboards/studiokestra/galatea/rev2/info.json b/keyboards/studiokestra/galatea/rev2/info.json index a050f88d7d..3520f50921 100644 --- a/keyboards/studiokestra/galatea/rev2/info.json +++ b/keyboards/studiokestra/galatea/rev2/info.json @@ -33,7 +33,11 @@ "pin": "D4" }, "rgblight": { - "max_brightness": 200 + "saturation_steps": 8, + "brightness_steps": 8, + "led_count": 24, + "max_brightness": 200, + "sleep": true }, "layouts": { "LAYOUT": { diff --git a/keyboards/suavity/ehan/rules.mk b/keyboards/suavity/ehan/rules.mk index e7b278b4b2..5a44d1732f 100644 --- a/keyboards/suavity/ehan/rules.mk +++ b/keyboards/suavity/ehan/rules.mk @@ -11,5 +11,3 @@ BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow AUDIO_ENABLE = no # Audio output -# Enter lower-power sleep mode when on the ChibiOS idle thread -OPT_DEFS += -DCORTEX_ENABLE_WFI_IDLE=TRUE diff --git a/keyboards/swiftrax/retropad/config.h b/keyboards/swiftrax/retropad/config.h index b737022959..e6934e4b64 100644 --- a/keyboards/swiftrax/retropad/config.h +++ b/keyboards/swiftrax/retropad/config.h @@ -27,10 +27,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #define RGBLIGHT_EFFECT_RGB_TEST #define RGBLIGHT_EFFECT_ALTERNATING #define RGBLIGHT_EFFECT_TWINKLE -#define RGBLED_NUM 6 -#define RGBLIGHT_HUE_STEP 8 -#define RGBLIGHT_SAT_STEP 8 -#define RGBLIGHT_VAL_STEP 8 /*EEPROM for via*/ #define DYNAMIC_KEYMAP_LAYER_COUNT 3 diff --git a/keyboards/swiftrax/retropad/info.json b/keyboards/swiftrax/retropad/info.json index 57ce8bd79e..b60323c9b0 100644 --- a/keyboards/swiftrax/retropad/info.json +++ b/keyboards/swiftrax/retropad/info.json @@ -21,6 +21,11 @@ "bootmagic": { "matrix": [1, 0] }, + "rgblight": { + "saturation_steps": 8, + "brightness_steps": 8, + "led_count": 6 + }, "ws2812": { "pin": "B7" }, diff --git a/keyboards/switchplate/southpaw_65/config.h b/keyboards/switchplate/southpaw_65/config.h index 790d70d9c8..0019dc79e9 100644 --- a/keyboards/switchplate/southpaw_65/config.h +++ b/keyboards/switchplate/southpaw_65/config.h @@ -21,7 +21,6 @@ #define MATRIX_ROWS 5 #define MATRIX_COLS 19 -#define RGBLED_NUM 9 #define RGBLIGHT_EFFECT_BREATHING #define RGBLIGHT_EFFECT_RAINBOW_MOOD #define RGBLIGHT_EFFECT_RAINBOW_SWIRL diff --git a/keyboards/switchplate/southpaw_65/info.json b/keyboards/switchplate/southpaw_65/info.json index 245b3ab02a..4c0764bb87 100644 --- a/keyboards/switchplate/southpaw_65/info.json +++ b/keyboards/switchplate/southpaw_65/info.json @@ -12,6 +12,9 @@ "pin": "B5", "levels": 10 }, + "rgblight": { + "led_count": 9 + }, "ws2812": { "pin": "C7" }, diff --git a/keyboards/synthlabs/solo/config.h b/keyboards/synthlabs/solo/config.h index 71170a12ce..779b85a7c3 100644 --- a/keyboards/synthlabs/solo/config.h +++ b/keyboards/synthlabs/solo/config.h @@ -3,9 +3,6 @@ #pragma once -#define ENCODERS_CW_KEY { { 2, 1 } } -#define ENCODERS_CCW_KEY { { 0, 1 } } - #define JOYSTICK_BUTTON_COUNT 13 #define JOYSTICK_AXIS_COUNT 1 #define JOYSTICK_AXIS_RESOLUTION 16 diff --git a/keyboards/synthlabs/solo/info.json b/keyboards/synthlabs/solo/info.json index 168d2d06dc..2076fa3e77 100644 --- a/keyboards/synthlabs/solo/info.json +++ b/keyboards/synthlabs/solo/info.json @@ -36,11 +36,7 @@ {"label": "P2 5", "x": 5, "y": 0, "w": 0.5, "h": 1.5, "matrix": [0, 4]}, {"label": "P1 6", "x": 5.5, "y": 0, "w": 0.5, "h": 1.5, "matrix": [0, 5]}, {"label": "P2 7", "x": 6, "y": 0, "w": 0.5, "h": 1.5, "matrix": [0, 6]}, - - {"label": "Knob CCW", "x": 0, "y": 1.25, "w": 0.5, "matrix": [1, 0]}, - {"label": "Knob Press", "x": 0.5, "y": 1, "w": 1.5, "h": 1.5, "matrix": [1, 1]}, - {"label": "Knob CW", "x": 2, "y": 1.25, "w": 0.5, "matrix": [1, 2]}, - + {"label":"Knob Press", "x":0.5, "y":1, "w":1.5, "h":1.5, "matrix":[1,1]}, {"label": "P1 1", "x": 3, "y": 2, "w": 0.5, "h": 1.5, "matrix": [2, 0]}, {"label": "P2 2", "x": 3.5, "y": 2, "w": 0.5, "h": 1.5, "matrix": [2, 1]}, {"label": "P1 3", "x": 4, "y": 2, "w": 0.5, "h": 1.5, "matrix": [2, 2]}, @@ -55,11 +51,7 @@ {"label": "P1 2", "x": 3.5, "y": 0, "w": 0.5, "h": 1.5, "matrix": [0, 1]}, {"label": "P1 4", "x": 4.5, "y": 0, "w": 0.5, "h": 1.5, "matrix": [0, 3]}, {"label": "P1 6", "x": 5.5, "y": 0, "w": 0.5, "h": 1.5, "matrix": [0, 5]}, - - {"label": "Knob CCW", "x": 0, "y": 1.25, "w": 0.5, "matrix": [1, 0]}, - {"label": "Knob Press", "x": 0.5, "y": 1, "w": 1.5, "h": 1.5, "matrix": [1, 1]}, - {"label": "Knob CW", "x": 2, "y": 1.25, "w": 0.5, "matrix": [1, 2]}, - + {"label":"Knob Press", "x":0.5, "y":1, "w":1.5, "h":1.5, "matrix":[1,1]}, {"label": "P1 1", "x": 3, "y": 2, "w": 0.5, "h": 1.5, "matrix": [2, 0]}, {"label": "P1 3", "x": 4, "y": 2, "w": 0.5, "h": 1.5, "matrix": [2, 2]}, {"label": "P1 5", "x": 5, "y": 2, "w": 0.5, "h": 1.5, "matrix": [2, 4]}, @@ -71,11 +63,7 @@ {"label": "P2 6", "x": 0.5, "y": 0, "w": 0.5, "h": 1.5, "matrix": [2, 5]}, {"label": "P2 4", "x": 1.5, "y": 0, "w": 0.5, "h": 1.5, "matrix": [2, 3]}, {"label": "P2 2", "x": 2.5, "y": 0, "w": 0.5, "h": 1.5, "matrix": [2, 1]}, - - {"label": "Knob CCW", "x": 4, "y": 1.25, "w": 0.5, "matrix": [1, 0]}, - {"label": "Knob Press", "x": 4.5, "y": 1, "w": 1.5, "h": 1.5, "matrix": [1, 1]}, - {"label": "Knob CW", "x": 6, "y": 1.25, "w": 0.5, "matrix": [1, 2]}, - + {"label":"Knob Press", "x":4.5, "y":1, "w":1.5, "h":1.5, "matrix":[1,1]}, {"label": "P2 7", "x": 0, "y": 2, "w": 0.5, "h": 1.5, "matrix": [0, 6]}, {"label": "P2 5", "x": 1, "y": 2, "w": 0.5, "h": 1.5, "matrix": [0, 4]}, {"label": "P2 3", "x": 2, "y": 2, "w": 0.5, "h": 1.5, "matrix": [0, 2]}, diff --git a/keyboards/synthlabs/solo/keymaps/default/keymap.c b/keyboards/synthlabs/solo/keymaps/default/keymap.c index fa54111fe8..2d7313b77e 100644 --- a/keyboards/synthlabs/solo/keymaps/default/keymap.c +++ b/keyboards/synthlabs/solo/keymaps/default/keymap.c @@ -6,7 +6,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { [0] = LAYOUT_all( KC_J, KC_U, KC_K, KC_I, KC_L, KC_O, KC_SCLN, - _______, KC_MUTE, _______, + KC_MUTE, KC_J, KC_U, KC_K, KC_I, KC_L, KC_O, KC_SCLN ) }; diff --git a/keyboards/synthlabs/solo/keymaps/gamepad/keymap.c b/keyboards/synthlabs/solo/keymaps/gamepad/keymap.c index f450769b43..7bafe6b191 100644 --- a/keyboards/synthlabs/solo/keymaps/gamepad/keymap.c +++ b/keyboards/synthlabs/solo/keymaps/gamepad/keymap.c @@ -6,7 +6,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { [0] = LAYOUT_all( JS_0,JS_1,JS_2,JS_3,JS_4,JS_5,JS_6, - KC_NO, JS_7, KC_NO, + JS_7, JS_0,JS_1,JS_2,JS_3,JS_4,JS_5,JS_6 ) }; diff --git a/keyboards/synthlabs/solo/keymaps/via/keymap.c b/keyboards/synthlabs/solo/keymaps/via/keymap.c index 84f99df9ab..8f107f8a10 100644 --- a/keyboards/synthlabs/solo/keymaps/via/keymap.c +++ b/keyboards/synthlabs/solo/keymaps/via/keymap.c @@ -6,64 +6,31 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { [0] = LAYOUT_all( KC_J, KC_U, KC_K, KC_I, KC_L, KC_O, KC_SCLN, - KC_VOLD, KC_MUTE, KC_VOLU, + KC_MUTE, KC_J, KC_U, KC_K, KC_I, KC_L, KC_O, KC_SCLN ), [1] = LAYOUT_all( _______, _______, _______, _______, _______, _______, _______, - _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______ ), [2] = LAYOUT_all( _______, _______, _______, _______, _______, _______, _______, - _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______ ), [3] = LAYOUT_all( _______, _______, _______, _______, _______, _______, _______, - _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______ ) }; -#if defined(VIA_ENABLE) && defined(ENCODER_ENABLE) -static uint8_t encoder_state[NUM_ENCODERS] = {0}; -static keypos_t encoder_cw[NUM_ENCODERS] = ENCODERS_CW_KEY; -static keypos_t encoder_ccw[NUM_ENCODERS] = ENCODERS_CCW_KEY; - -void encoder_action_unregister(void) { - for (int index = 0; index < NUM_ENCODERS; ++index) { - if (encoder_state[index]) { - keyevent_t encoder_event = (keyevent_t) { - .key = encoder_state[index] >> 1 ? encoder_cw[index] : encoder_ccw[index], - .pressed = false, - .time = timer_read(), - .type = KEY_EVENT - }; - encoder_state[index] = 0; - action_exec(encoder_event); - } - } -} - -void encoder_action_register(uint8_t index, bool clockwise) { - keyevent_t encoder_event = (keyevent_t) { - .key = clockwise ? encoder_cw[index] : encoder_ccw[index], - .pressed = true, - .time = timer_read(), - .type = KEY_EVENT - }; - encoder_state[index] = (clockwise ^ 1) | (clockwise << 1); - action_exec(encoder_event); -} - -void matrix_scan_user(void) { - encoder_action_unregister(); -} - -bool encoder_update_user(uint8_t index, bool clockwise) { - encoder_action_register(index, clockwise); - return false; -} - +#ifdef ENCODER_MAP_ENABLE +const uint16_t PROGMEM encoder_map[][NUM_ENCODERS][NUM_DIRECTIONS] = { + [0] = { ENCODER_CCW_CW(KC_VOLD, KC_VOLU) }, + [1] = { ENCODER_CCW_CW(_______, _______) }, + [2] = { ENCODER_CCW_CW(_______, _______) }, + [3] = { ENCODER_CCW_CW(_______, _______) }, +}; #endif diff --git a/keyboards/synthlabs/solo/keymaps/via/rules.mk b/keyboards/synthlabs/solo/keymaps/via/rules.mk index 1e5b99807c..f1adcab005 100644 --- a/keyboards/synthlabs/solo/keymaps/via/rules.mk +++ b/keyboards/synthlabs/solo/keymaps/via/rules.mk @@ -1 +1,2 @@ VIA_ENABLE = yes +ENCODER_MAP_ENABLE = yes diff --git a/keyboards/synthlabs/solo/solo.c b/keyboards/synthlabs/solo/solo.c deleted file mode 100644 index aca82c9ea3..0000000000 --- a/keyboards/synthlabs/solo/solo.c +++ /dev/null @@ -1,18 +0,0 @@ -// Copyright 2022 Aaron Hong (@hongaaronc) -// SPDX-License-Identifier: GPL-2.0-or-later - -#include "quantum.h" - -#if !defined(VIA_ENABLE) && !defined(JOYSTICK_ENABLE) && defined(ENCODER_ENABLE) -bool encoder_update_kb(uint8_t index, bool clockwise) { - if (!encoder_update_user(index, clockwise)) { return false; } - if (index == 0) { - if (clockwise) { - tap_code_delay(KC_VOLU, 10); - } else { - tap_code_delay(KC_VOLD, 10); - } - } - return true; -} -#endif diff --git a/keyboards/takashicompany/center_enter/config.h b/keyboards/takashicompany/center_enter/config.h index 83952009e5..db24eec2fc 100644 --- a/keyboards/takashicompany/center_enter/config.h +++ b/keyboards/takashicompany/center_enter/config.h @@ -17,11 +17,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #pragma once -# define RGBLED_NUM 6 -# define RGBLIGHT_HUE_STEP 8 -# define RGBLIGHT_SAT_STEP 8 -# define RGBLIGHT_VAL_STEP 8 -# define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */ # define RGBLIGHT_EFFECT_BREATHING # define RGBLIGHT_EFFECT_RAINBOW_MOOD # define RGBLIGHT_EFFECT_RAINBOW_SWIRL diff --git a/keyboards/takashicompany/center_enter/info.json b/keyboards/takashicompany/center_enter/info.json index 3521b24218..f0c0068e93 100644 --- a/keyboards/takashicompany/center_enter/info.json +++ b/keyboards/takashicompany/center_enter/info.json @@ -8,6 +8,12 @@ "pid": "0x0012", "device_version": "0.0.1" }, + "rgblight": { + "saturation_steps": 8, + "brightness_steps": 8, + "led_count": 6, + "sleep": true + }, "ws2812": { "pin": "D3" }, diff --git a/keyboards/takashicompany/compacx/config.h b/keyboards/takashicompany/compacx/config.h index 07287712f3..9d9d494c84 100644 --- a/keyboards/takashicompany/compacx/config.h +++ b/keyboards/takashicompany/compacx/config.h @@ -17,12 +17,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #pragma once -# define RGBLED_NUM 12 -# define RGBLED_SPLIT {6, 6} -# define RGBLIGHT_HUE_STEP 8 -# define RGBLIGHT_SAT_STEP 8 -# define RGBLIGHT_VAL_STEP 8 -# define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */ #define RGBLIGHT_EFFECT_BREATHING #define RGBLIGHT_EFFECT_RAINBOW_MOOD #define RGBLIGHT_EFFECT_RAINBOW_SWIRL diff --git a/keyboards/takashicompany/compacx/info.json b/keyboards/takashicompany/compacx/info.json index 2e7ef2f7a6..0446ac24bb 100644 --- a/keyboards/takashicompany/compacx/info.json +++ b/keyboards/takashicompany/compacx/info.json @@ -8,6 +8,13 @@ "pid": "0x0014", "device_version": "0.0.1" }, + "rgblight": { + "saturation_steps": 8, + "brightness_steps": 8, + "led_count": 12, + "sleep": true, + "split_count": [6, 6] + }, "ws2812": { "pin": "D3" }, diff --git a/keyboards/takashicompany/dogtag/dogtag.c b/keyboards/takashicompany/dogtag/dogtag.c deleted file mode 100644 index 0ca5f7c3e8..0000000000 --- a/keyboards/takashicompany/dogtag/dogtag.c +++ /dev/null @@ -1,48 +0,0 @@ -/* Copyright 2021 takashicompany - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see <http://www.gnu.org/licenses/>. - */ - -#include "quantum.h" - -bool encoder_update_kb(uint8_t index, bool clockwise) { - keypos_t key; - if (index == 0) { - if (clockwise) { - key.row = 2; - key.col = 1; - } else { - key.row = 2; - key.col = 0; - } - uint8_t layer = layer_switch_get_layer(key); - uint16_t keycode = keymap_key_to_keycode(layer, key); - - tap_code16(keycode); - } else { - if (clockwise) { - key.row = 5; - key.col = 0; - } else { - key.row = 5; - key.col = 1; - } - uint8_t layer = layer_switch_get_layer(key); - uint16_t keycode = keymap_key_to_keycode(layer, key); - - tap_code16(keycode); - } - - return true; -} diff --git a/keyboards/takashicompany/dogtag/info.json b/keyboards/takashicompany/dogtag/info.json index 6827375d84..d65092ecca 100644 --- a/keyboards/takashicompany/dogtag/info.json +++ b/keyboards/takashicompany/dogtag/info.json @@ -80,13 +80,7 @@ {"matrix": [4, 1], "x": 8, "y": 1}, {"matrix": [4, 2], "x": 9, "y": 1}, {"matrix": [4, 3], "x": 10, "y": 1}, - {"matrix": [4, 4], "x": 11, "y": 1}, - - {"matrix": [2, 0], "x": 3.5, "y": 3.25}, - {"matrix": [2, 1], "x": 4.5, "y": 3.25}, - - {"matrix": [5, 0], "x": 6.5, "y": 3.25}, - {"matrix": [5, 1], "x": 7.5, "y": 3.25} + {"matrix": [4, 4], "x": 11, "y": 1} ] } } diff --git a/keyboards/takashicompany/dogtag/keymaps/default/keymap.c b/keyboards/takashicompany/dogtag/keymaps/default/keymap.c index 865e6a2290..8eb6b433b3 100644 --- a/keyboards/takashicompany/dogtag/keymaps/default/keymap.c +++ b/keyboards/takashicompany/dogtag/keymaps/default/keymap.c @@ -16,15 +16,20 @@ #include QMK_KEYBOARD_H const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { - LAYOUT( + [0] = LAYOUT( LT(1, KC_ESC), KC_Q, KC_W, KC_E, KC_Y, KC_U, KC_I, KC_O, - KC_LSFT, KC_A, KC_S, KC_D, KC_SPC, KC_TAB, KC_H, KC_J, KC_K, KC_L, - KC_WH_U, KC_WH_D, KC_WH_U, KC_WH_D + KC_LSFT, KC_A, KC_S, KC_D, KC_SPC, KC_TAB, KC_H, KC_J, KC_K, KC_L ), - LAYOUT( + [1] = LAYOUT( KC_TRNS, RGB_MOD, RGB_HUI, RGB_SAI, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, - KC_TRNS, RGB_M_P, RGB_M_K, RGB_TOG, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, - KC_WH_L, KC_WH_R, KC_WH_L, KC_WH_R + KC_TRNS, RGB_M_P, RGB_M_K, RGB_TOG, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS ) }; + +#ifdef ENCODER_MAP_ENABLE +const uint16_t PROGMEM encoder_map[][NUM_ENCODERS][NUM_DIRECTIONS] = { + [0] = { ENCODER_CCW_CW(KC_MS_WH_UP, KC_MS_WH_DOWN), ENCODER_CCW_CW(KC_MS_WH_UP, KC_MS_WH_DOWN) }, + [1] = { ENCODER_CCW_CW(KC_TRNS, KC_TRNS), ENCODER_CCW_CW(KC_TRNS, KC_TRNS) }, +}; +#endif diff --git a/keyboards/takashicompany/dogtag/keymaps/default/rules.mk b/keyboards/takashicompany/dogtag/keymaps/default/rules.mk new file mode 100644 index 0000000000..ee32568148 --- /dev/null +++ b/keyboards/takashicompany/dogtag/keymaps/default/rules.mk @@ -0,0 +1 @@ +ENCODER_MAP_ENABLE = yes diff --git a/keyboards/takashicompany/dogtag/keymaps/via/keymap.c b/keyboards/takashicompany/dogtag/keymaps/via/keymap.c index 865e6a2290..969aec92a5 100644 --- a/keyboards/takashicompany/dogtag/keymaps/via/keymap.c +++ b/keyboards/takashicompany/dogtag/keymaps/via/keymap.c @@ -18,13 +18,18 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { LAYOUT( LT(1, KC_ESC), KC_Q, KC_W, KC_E, KC_Y, KC_U, KC_I, KC_O, - KC_LSFT, KC_A, KC_S, KC_D, KC_SPC, KC_TAB, KC_H, KC_J, KC_K, KC_L, - KC_WH_U, KC_WH_D, KC_WH_U, KC_WH_D + KC_LSFT, KC_A, KC_S, KC_D, KC_SPC, KC_TAB, KC_H, KC_J, KC_K, KC_L ), LAYOUT( KC_TRNS, RGB_MOD, RGB_HUI, RGB_SAI, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, - KC_TRNS, RGB_M_P, RGB_M_K, RGB_TOG, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, - KC_WH_L, KC_WH_R, KC_WH_L, KC_WH_R + KC_TRNS, RGB_M_P, RGB_M_K, RGB_TOG, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS ) }; + +#ifdef ENCODER_MAP_ENABLE +const uint16_t PROGMEM encoder_map[][NUM_ENCODERS][NUM_DIRECTIONS] = { + [0] = { ENCODER_CCW_CW(KC_MS_WH_UP, KC_MS_WH_DOWN), ENCODER_CCW_CW(KC_MS_WH_UP, KC_MS_WH_DOWN) }, + [1] = { ENCODER_CCW_CW(KC_TRNS, KC_TRNS), ENCODER_CCW_CW(KC_TRNS, KC_TRNS) }, +}; +#endif diff --git a/keyboards/takashicompany/dogtag/keymaps/via/rules.mk b/keyboards/takashicompany/dogtag/keymaps/via/rules.mk index 36b7ba9cbc..1189f4ad19 100644 --- a/keyboards/takashicompany/dogtag/keymaps/via/rules.mk +++ b/keyboards/takashicompany/dogtag/keymaps/via/rules.mk @@ -1,2 +1,3 @@ VIA_ENABLE = yes LTO_ENABLE = yes +ENCODER_MAP_ENABLE = yes diff --git a/keyboards/takashicompany/endzone34/config.h b/keyboards/takashicompany/endzone34/config.h index ccd72051a7..0ed1f94324 100644 --- a/keyboards/takashicompany/endzone34/config.h +++ b/keyboards/takashicompany/endzone34/config.h @@ -17,11 +17,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #pragma once - #define RGBLED_NUM 9 - #define RGBLIGHT_HUE_STEP 8 - #define RGBLIGHT_SAT_STEP 8 - #define RGBLIGHT_VAL_STEP 8 - #define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */ /*== all animations enable ==*/ #define RGBLIGHT_EFFECT_BREATHING #define RGBLIGHT_EFFECT_RAINBOW_MOOD diff --git a/keyboards/takashicompany/endzone34/info.json b/keyboards/takashicompany/endzone34/info.json index 8eb5b4dd57..536abee80d 100644 --- a/keyboards/takashicompany/endzone34/info.json +++ b/keyboards/takashicompany/endzone34/info.json @@ -8,6 +8,12 @@ "pid": "0x0006", "device_version": "0.0.1" }, + "rgblight": { + "saturation_steps": 8, + "brightness_steps": 8, + "led_count": 9, + "sleep": true + }, "ws2812": { "pin": "D3" }, diff --git a/keyboards/takashicompany/heavy_left/config.h b/keyboards/takashicompany/heavy_left/config.h index df15f55f72..0617a5c602 100644 --- a/keyboards/takashicompany/heavy_left/config.h +++ b/keyboards/takashicompany/heavy_left/config.h @@ -17,12 +17,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #pragma once -# define RGBLED_NUM 6 * 2 -# define RGBLED_SPLIT {6, 6} -# define RGBLIGHT_HUE_STEP 8 -# define RGBLIGHT_SAT_STEP 8 -# define RGBLIGHT_VAL_STEP 8 -# define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */ #define RGBLIGHT_EFFECT_BREATHING #define RGBLIGHT_EFFECT_RAINBOW_MOOD #define RGBLIGHT_EFFECT_RAINBOW_SWIRL diff --git a/keyboards/takashicompany/heavy_left/info.json b/keyboards/takashicompany/heavy_left/info.json index 1afa2b1280..ffdd1d400a 100644 --- a/keyboards/takashicompany/heavy_left/info.json +++ b/keyboards/takashicompany/heavy_left/info.json @@ -8,6 +8,13 @@ "pid": "0x0015", "device_version": "0.0.1" }, + "rgblight": { + "saturation_steps": 8, + "brightness_steps": 8, + "led_count": 12, + "sleep": true, + "split_count": [6, 6] + }, "ws2812": { "pin": "D3" }, diff --git a/keyboards/takashicompany/minizone/config.h b/keyboards/takashicompany/minizone/config.h index 2c494ea329..6f2f5bf698 100644 --- a/keyboards/takashicompany/minizone/config.h +++ b/keyboards/takashicompany/minizone/config.h @@ -3,11 +3,6 @@ #pragma once -# define RGBLED_NUM 11 -# define RGBLIGHT_HUE_STEP 8 -# define RGBLIGHT_SAT_STEP 8 -# define RGBLIGHT_VAL_STEP 8 -# define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */ # define RGBLIGHT_EFFECT_BREATHING # define RGBLIGHT_EFFECT_RAINBOW_MOOD # define RGBLIGHT_EFFECT_RAINBOW_SWIRL diff --git a/keyboards/takashicompany/minizone/info.json b/keyboards/takashicompany/minizone/info.json index 806a255bcb..b6e8266f81 100644 --- a/keyboards/takashicompany/minizone/info.json +++ b/keyboards/takashicompany/minizone/info.json @@ -8,6 +8,12 @@ "pid": "0x0021", "device_version": "0.0.1" }, + "rgblight": { + "saturation_steps": 8, + "brightness_steps": 8, + "led_count": 11, + "sleep": true + }, "ws2812": { "pin": "D3" }, diff --git a/keyboards/takashicompany/qoolee/config.h b/keyboards/takashicompany/qoolee/config.h index 83952009e5..db24eec2fc 100644 --- a/keyboards/takashicompany/qoolee/config.h +++ b/keyboards/takashicompany/qoolee/config.h @@ -17,11 +17,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #pragma once -# define RGBLED_NUM 6 -# define RGBLIGHT_HUE_STEP 8 -# define RGBLIGHT_SAT_STEP 8 -# define RGBLIGHT_VAL_STEP 8 -# define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */ # define RGBLIGHT_EFFECT_BREATHING # define RGBLIGHT_EFFECT_RAINBOW_MOOD # define RGBLIGHT_EFFECT_RAINBOW_SWIRL diff --git a/keyboards/takashicompany/qoolee/info.json b/keyboards/takashicompany/qoolee/info.json index c9aacaabc2..d39f22d928 100644 --- a/keyboards/takashicompany/qoolee/info.json +++ b/keyboards/takashicompany/qoolee/info.json @@ -8,6 +8,12 @@ "pid": "0x0013", "device_version": "0.0.1" }, + "rgblight": { + "saturation_steps": 8, + "brightness_steps": 8, + "led_count": 6, + "sleep": true + }, "ws2812": { "pin": "D3" }, diff --git a/keyboards/takashicompany/radialex/config.h b/keyboards/takashicompany/radialex/config.h index 34ab4a1239..9d9d494c84 100644 --- a/keyboards/takashicompany/radialex/config.h +++ b/keyboards/takashicompany/radialex/config.h @@ -17,11 +17,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #pragma once -# define RGBLED_NUM 12 -# define RGBLIGHT_HUE_STEP 8 -# define RGBLIGHT_SAT_STEP 8 -# define RGBLIGHT_VAL_STEP 8 -# define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */ #define RGBLIGHT_EFFECT_BREATHING #define RGBLIGHT_EFFECT_RAINBOW_MOOD #define RGBLIGHT_EFFECT_RAINBOW_SWIRL diff --git a/keyboards/takashicompany/radialex/info.json b/keyboards/takashicompany/radialex/info.json index d6852033b1..1cc0124ecc 100644 --- a/keyboards/takashicompany/radialex/info.json +++ b/keyboards/takashicompany/radialex/info.json @@ -8,6 +8,12 @@ "pid": "0x0019", "device_version": "0.0.1" }, + "rgblight": { + "saturation_steps": 8, + "brightness_steps": 8, + "led_count": 12, + "sleep": true + }, "ws2812": { "pin": "D3" }, diff --git a/keyboards/takashicompany/spreadwriter/info.json b/keyboards/takashicompany/spreadwriter/info.json index 1ab624ebcd..da5a95b895 100644 --- a/keyboards/takashicompany/spreadwriter/info.json +++ b/keyboards/takashicompany/spreadwriter/info.json @@ -105,9 +105,7 @@ {"matrix": [7, 3], "x": 12, "y": 3}, {"matrix": [7, 4], "x": 13, "y": 3.25}, {"matrix": [7, 5], "x": 14, "y": 3.5}, - {"matrix": [7, 6], "x": 15, "y": 3.5}, - {"matrix": [0, 6], "x": 7, "y": 4.25}, - {"matrix": [4, 0], "x": 8, "y": 4.25} + {"matrix": [7, 6], "x": 15, "y": 3.5} ] } } diff --git a/keyboards/takashicompany/spreadwriter/keymaps/default/keymap.c b/keyboards/takashicompany/spreadwriter/keymaps/default/keymap.c index f0ac6aa00b..fb74b6ee30 100644 --- a/keyboards/takashicompany/spreadwriter/keymaps/default/keymap.c +++ b/keyboards/takashicompany/spreadwriter/keymaps/default/keymap.c @@ -13,56 +13,49 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { KC_ESC, LT(2, KC_Q), KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_BSPC, KC_LCTL, KC_A, KC_S, LT(2, KC_D), KC_F, KC_G, SPREADWRITER, KC_H, KC_J, LT(2, KC_K), KC_L, KC_ENT, KC_ENT, KC_LSFT, SFT_T(KC_Z), GUI_T(KC_X), KC_C, KC_V, KC_B, MEH(KC_4), LSA(KC_5), KC_N, KC_M, KC_COMM, CTL_T(KC_DOT), KC_BSPC, KC_DEL, - KC_LCTL, KC_LGUI, KC_LALT, MO(5), MO(4), ALT_T(KC_LNG2), SFT_T(KC_TAB), WEB, LT(6, KC_SPC), LT(1, KC_LNG1), KC_RALT, KC_LEFT, KC_UP, KC_DOWN, KC_RGHT, - KC_WH_U, KC_WH_D + KC_LCTL, KC_LGUI, KC_LALT, MO(5), MO(4), ALT_T(KC_LNG2), SFT_T(KC_TAB), WEB, LT(6, KC_SPC), LT(1, KC_LNG1), KC_RALT, KC_LEFT, KC_UP, KC_DOWN, KC_RGHT ), LAYOUT( KC_TRNS, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_TRNS, KC_LCTL, CTL_T(KC_EQL), KC_LBRC, KC_SLSH, KC_MINS, KC_INT1, KC_TRNS, KC_SCLN, KC_QUOT, KC_RBRC, KC_NUHS, KC_INT3, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, - KC_TRNS, KC_TRNS + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS ), LAYOUT( KC_ESC, KC_TAB, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_UP, KC_NO, KC_NO, KC_NO, KC_TRNS, KC_LCTL, KC_TRNS, KC_QUES, KC_EXLM, KC_NO, KC_TRNS, KC_NO, KC_LEFT, KC_DOWN, KC_RGHT, KC_NO, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, MO(3), KC_TRNS, - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, - KC_BSPC, KC_SPC + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS ), LAYOUT( RGB_TOG, RGB_MOD, RGB_HUI, RGB_SAI, RGB_VAI, KC_NO, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_TRNS, RGB_M_P, RGB_M_B, RGB_M_R, RGB_M_SW, RGB_M_SN, KC_TRNS, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, - KC_TRNS, RGB_M_K, RGB_M_X, RGB_M_G, RGB_M_T, RGB_M_T, KC_TRNS, QK_BOOT, KC_F11, KC_F12, KC_CAPS, KC_NO, KC_NO, KC_TRNS, - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, - KC_TRNS, KC_TRNS + KC_TRNS, RGB_M_K, RGB_M_X, RGB_M_G, RGB_M_T, RGB_M_T, KC_TRNS, QK_BOOT, KC_F11, KC_F12, KC_CAPS, KC_NO, KC_NO, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS ), LAYOUT( KC_TRNS, KC_TRNS, KC_P7, KC_P8, KC_P9, KC_TRNS, KC_TRNS, KC_MINS, KC_EQL, KC_INT3, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_P4, KC_P5, KC_6, KC_TRNS, KC_TRNS, KC_TRNS, KC_LBRC, KC_RBRC, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_P1, KC_P2, KC_P3, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_SCLN, KC_QUOT, KC_NUHS, KC_TRNS, KC_TRNS, - KC_TRNS, KC_TRNS, KC_P0, KC_COMM, KC_DOT, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_COMM, KC_DOT, KC_SLSH, KC_INT1, KC_TRNS, - KC_TRNS, KC_TRNS + KC_TRNS, KC_TRNS, KC_P0, KC_COMM, KC_DOT, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_COMM, KC_DOT, KC_SLSH, KC_INT1, KC_TRNS ), LAYOUT( KC_TRNS, KC_TRNS, KC_P7, KC_P8, KC_P9, KC_TRNS, KC_TRNS, S(KC_MINS), S(KC_EQL), S(KC_INT3), KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_P4, KC_P5, KC_6, KC_TRNS, KC_TRNS, KC_TRNS, S(KC_LBRC), S(KC_RBRC), KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_P1, KC_P2, KC_P3, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, S(KC_SCLN), S(KC_QUOT), S(KC_NUHS), KC_TRNS, KC_TRNS, - KC_TRNS, KC_TRNS, KC_P0, KC_COMM, KC_DOT, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, S(KC_COMM), S(KC_DOT), S(KC_SLSH), S(KC_INT1), KC_TRNS, - KC_TRNS, KC_TRNS + KC_TRNS, KC_TRNS, KC_P0, KC_COMM, KC_DOT, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, S(KC_COMM), S(KC_DOT), S(KC_SLSH), S(KC_INT1), KC_TRNS ), LAYOUT( KC_TRNS, S(KC_1), S(KC_2), S(KC_3), S(KC_4), S(KC_5), S(KC_6), S(KC_7), S(KC_8), S(KC_9), G(KC_INT3), KC_TRNS, KC_LCTL, S(KC_EQL), S(KC_LBRC), S(KC_SLSH), S(KC_MINS), S(KC_INT1), KC_TRNS, S(KC_SCLN), S(KC_QUOT), S(KC_RBRC), S(KC_NUHS), S(KC_INT3), KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, - KC_TRNS, KC_TRNS + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS ) }; @@ -81,7 +74,7 @@ bool process_record_user(uint16_t keycode, keyrecord_t *record) { } return false; } - + return true; } @@ -92,6 +85,5 @@ bool encoder_update_user(uint8_t index, bool clockwise) { } else { tap_code(KC_MS_WH_UP); } - - return true; -}
\ No newline at end of file + return false; +} diff --git a/keyboards/takashicompany/spreadwriter/keymaps/via/keymap.c b/keyboards/takashicompany/spreadwriter/keymaps/via/keymap.c index c0d4a0003d..cf031394f1 100644 --- a/keyboards/takashicompany/spreadwriter/keymaps/via/keymap.c +++ b/keyboards/takashicompany/spreadwriter/keymaps/via/keymap.c @@ -13,56 +13,49 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { KC_ESC, LT(2, KC_Q), KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_BSPC, KC_LCTL, KC_A, KC_S, LT(2, KC_D), KC_F, KC_G, SPREADWRITER, KC_H, KC_J, LT(2, KC_K), KC_L, KC_ENT, KC_ENT, KC_LSFT, SFT_T(KC_Z), GUI_T(KC_X), KC_C, KC_V, KC_B, MEH(KC_4), LSA(KC_5), KC_N, KC_M, KC_COMM, CTL_T(KC_DOT), KC_BSPC, KC_DEL, - KC_LCTL, KC_LGUI, KC_LALT, MO(5), MO(4), ALT_T(KC_LNG2), SFT_T(KC_TAB), WEB, LT(6, KC_SPC), LT(1, KC_LNG1), KC_RALT, KC_LEFT, KC_UP, KC_DOWN, KC_RGHT, - KC_WH_U, KC_WH_D + KC_LCTL, KC_LGUI, KC_LALT, MO(5), MO(4), ALT_T(KC_LNG2), SFT_T(KC_TAB), WEB, LT(6, KC_SPC), LT(1, KC_LNG1), KC_RALT, KC_LEFT, KC_UP, KC_DOWN, KC_RGHT ), LAYOUT( KC_TRNS, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_TRNS, KC_LCTL, CTL_T(KC_EQL), KC_LBRC, KC_SLSH, KC_MINS, KC_INT1, KC_TRNS, KC_SCLN, KC_QUOT, KC_RBRC, KC_NUHS, KC_INT3, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, - KC_TRNS, KC_TRNS + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS ), LAYOUT( KC_ESC, KC_TAB, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_UP, KC_NO, KC_NO, KC_NO, KC_TRNS, KC_LCTL, KC_TRNS, KC_QUES, KC_EXLM, KC_NO, KC_TRNS, KC_NO, KC_LEFT, KC_DOWN, KC_RGHT, KC_NO, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, MO(3), KC_TRNS, - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, - KC_BSPC, KC_SPC + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS ), LAYOUT( RGB_TOG, RGB_MOD, RGB_HUI, RGB_SAI, RGB_VAI, KC_NO, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_TRNS, RGB_M_P, RGB_M_B, RGB_M_R, RGB_M_SW, RGB_M_SN, KC_TRNS, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, - KC_TRNS, RGB_M_K, RGB_M_X, RGB_M_G, RGB_M_T, RGB_M_T, KC_TRNS, QK_BOOT, KC_F11, KC_F12, KC_CAPS, KC_NO, KC_NO, KC_TRNS, - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, - KC_TRNS, KC_TRNS + KC_TRNS, RGB_M_K, RGB_M_X, RGB_M_G, RGB_M_T, RGB_M_T, KC_TRNS, QK_BOOT, KC_F11, KC_F12, KC_CAPS, KC_NO, KC_NO, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS ), LAYOUT( KC_TRNS, KC_TRNS, KC_P7, KC_P8, KC_P9, KC_TRNS, KC_TRNS, KC_MINS, KC_EQL, KC_INT3, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_P4, KC_P5, KC_6, KC_TRNS, KC_TRNS, KC_TRNS, KC_LBRC, KC_RBRC, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_P1, KC_P2, KC_P3, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_SCLN, KC_QUOT, KC_NUHS, KC_TRNS, KC_TRNS, - KC_TRNS, KC_TRNS, KC_P0, KC_COMM, KC_DOT, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_COMM, KC_DOT, KC_SLSH, KC_INT1, KC_TRNS, - KC_TRNS, KC_TRNS + KC_TRNS, KC_TRNS, KC_P0, KC_COMM, KC_DOT, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_COMM, KC_DOT, KC_SLSH, KC_INT1, KC_TRNS ), LAYOUT( KC_TRNS, KC_TRNS, KC_P7, KC_P8, KC_P9, KC_TRNS, KC_TRNS, S(KC_MINS), S(KC_EQL), S(KC_INT3), KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_P4, KC_P5, KC_6, KC_TRNS, KC_TRNS, KC_TRNS, S(KC_LBRC), S(KC_RBRC), KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_P1, KC_P2, KC_P3, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, S(KC_SCLN), S(KC_QUOT), S(KC_NUHS), KC_TRNS, KC_TRNS, - KC_TRNS, KC_TRNS, KC_P0, KC_COMM, KC_DOT, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, S(KC_COMM), S(KC_DOT), S(KC_SLSH), S(KC_INT1), KC_TRNS, - KC_TRNS, KC_TRNS + KC_TRNS, KC_TRNS, KC_P0, KC_COMM, KC_DOT, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, S(KC_COMM), S(KC_DOT), S(KC_SLSH), S(KC_INT1), KC_TRNS ), LAYOUT( KC_TRNS, S(KC_1), S(KC_2), S(KC_3), S(KC_4), S(KC_5), S(KC_6), S(KC_7), S(KC_8), S(KC_9), G(KC_INT3), KC_TRNS, KC_LCTL, S(KC_EQL), S(KC_LBRC), S(KC_SLSH), S(KC_MINS), S(KC_INT1), KC_TRNS, S(KC_SCLN), S(KC_QUOT), S(KC_RBRC), S(KC_NUHS), S(KC_INT3), KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, - KC_TRNS, KC_TRNS + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS ) }; @@ -81,49 +74,13 @@ bool process_record_user(uint16_t keycode, keyrecord_t *record) { } return false; } - - return true; -} - -//------------------------------------------------------------------------------ -// Rotary Encoder -//------------------------------------------------------------------------------ -static uint8_t encoder_state[NUM_ENCODERS] = {0}; -static keypos_t encoder_cw[NUM_ENCODERS] = ENCODERS_CW_KEY; -static keypos_t encoder_ccw[NUM_ENCODERS] = ENCODERS_CCW_KEY; - -void encoder_action_unregister(void) { - for (int index = 0; index < NUM_ENCODERS; ++index) { - if (encoder_state[index]) { - keyevent_t encoder_event = (keyevent_t) { - .key = encoder_state[index] >> 1 ? encoder_cw[index] : encoder_ccw[index], - .pressed = false, - .time = timer_read(), - .type = KEY_EVENT - }; - encoder_state[index] = 0; - action_exec(encoder_event); - } - } -} - -void encoder_action_register(uint8_t index, bool clockwise) { - keyevent_t encoder_event = (keyevent_t) { - .key = clockwise ? encoder_cw[index] : encoder_ccw[index], - .pressed = true, - .time = timer_read(), - .type = KEY_EVENT - }; - encoder_state[index] = (clockwise ^ 1) | (clockwise << 1); - action_exec(encoder_event); -} -void matrix_scan_kb(void) { - encoder_action_unregister(); - matrix_scan_user(); + return true; } -bool encoder_update_user(uint8_t index, bool clockwise) { - encoder_action_register(index, clockwise); - return true; +#ifdef ENCODER_MAP_ENABLE +const uint16_t PROGMEM encoder_map[][NUM_ENCODERS][NUM_DIRECTIONS] = { + [0] = { ENCODER_CCW_CW(KC_WH_U, KC_WH_D) }, + [1 ... 6] = { ENCODER_CCW_CW(_______, _______) }, }; +#endif diff --git a/keyboards/takashicompany/spreadwriter/keymaps/via/rules.mk b/keyboards/takashicompany/spreadwriter/keymaps/via/rules.mk index 036bd6d1c3..f1adcab005 100644 --- a/keyboards/takashicompany/spreadwriter/keymaps/via/rules.mk +++ b/keyboards/takashicompany/spreadwriter/keymaps/via/rules.mk @@ -1 +1,2 @@ -VIA_ENABLE = yes
\ No newline at end of file +VIA_ENABLE = yes +ENCODER_MAP_ENABLE = yes diff --git a/keyboards/takashiski/hecomi/alpha/config.h b/keyboards/takashiski/hecomi/alpha/config.h index ac6c077f6b..eebe3cf708 100644 --- a/keyboards/takashiski/hecomi/alpha/config.h +++ b/keyboards/takashiski/hecomi/alpha/config.h @@ -19,10 +19,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. //#define USE_I2C - #define RGBLED_NUM 16 - #define RGBLIGHT_HUE_STEP 8 - #define RGBLIGHT_SAT_STEP 8 - #define RGBLIGHT_VAL_STEP 8 /*== or choose animations ==*/ // #define RGBLIGHT_EFFECT_BREATHING // #define RGBLIGHT_EFFECT_RAINBOW_MOOD @@ -60,4 +56,3 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #define MASTER_LEFT #define EEHANDS */ -#define RGBLED_SPLIT {8,8} diff --git a/keyboards/takashiski/hecomi/alpha/info.json b/keyboards/takashiski/hecomi/alpha/info.json index 19a1f05760..a7b470ce88 100644 --- a/keyboards/takashiski/hecomi/alpha/info.json +++ b/keyboards/takashiski/hecomi/alpha/info.json @@ -16,6 +16,12 @@ "split": { "soft_serial_pin": "D1" }, + "rgblight": { + "saturation_steps": 8, + "brightness_steps": 8, + "led_count": 16, + "split_count": [8, 8] + }, "ws2812": { "pin": "D4" }, diff --git a/keyboards/takashiski/hecomi/keymaps/kakunpc/keymap.c b/keyboards/takashiski/hecomi/keymaps/kakunpc/keymap.c index fb61d8ed62..df1b1195bc 100644 --- a/keyboards/takashiski/hecomi/keymaps/kakunpc/keymap.c +++ b/keyboards/takashiski/hecomi/keymaps/kakunpc/keymap.c @@ -50,19 +50,3 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { KC_LGUI,KC_NO,KC_LALT,KC_INT5,KC_NO,KC_SPC, KC_0,KC_NO,KC_HOME,KC_PGUP,KC_PGDN,KC_END ), }; - -bool process_record_user(uint16_t keycode, keyrecord_t *record) { - return true; -} - -void keyboard_post_init_user(void) { - -} - -void matrix_scan_user(void) { - -} - -void led_set_user(uint8_t usb_led) { - -} diff --git a/keyboards/takashiski/namecard2x4/keymaps/brainfuck/keymap.c b/keyboards/takashiski/namecard2x4/keymaps/brainfuck/keymap.c index a60408366d..4b35b08418 100644 --- a/keyboards/takashiski/namecard2x4/keymaps/brainfuck/keymap.c +++ b/keyboards/takashiski/namecard2x4/keymaps/brainfuck/keymap.c @@ -40,20 +40,3 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { ) }; - - -void matrix_init_user(void) { - -} - -void matrix_scan_user(void) { - -} - -bool process_record_user(uint16_t keycode, keyrecord_t *record) { - return true; -} - -void led_set_user(uint8_t usb_led) { - -} diff --git a/keyboards/takashiski/namecard2x4/rev1/config.h b/keyboards/takashiski/namecard2x4/rev1/config.h index c4a349580c..58233619a2 100644 --- a/keyboards/takashiski/namecard2x4/rev1/config.h +++ b/keyboards/takashiski/namecard2x4/rev1/config.h @@ -17,7 +17,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #pragma once -#define RGBLED_NUM 4 #define RGBLIGHT_EFFECT_BREATHING #define RGBLIGHT_EFFECT_RAINBOW_MOOD #define RGBLIGHT_EFFECT_RAINBOW_SWIRL @@ -28,9 +27,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #define RGBLIGHT_EFFECT_RGB_TEST #define RGBLIGHT_EFFECT_ALTERNATING #define RGBLIGHT_EFFECT_TWINKLE -#define RGBLIGHT_HUE_STEP 10 -#define RGBLIGHT_SAT_STEP 10 -#define RGBLIGHT_VAL_STEP 10 /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ #define LOCKING_SUPPORT_ENABLE diff --git a/keyboards/takashiski/namecard2x4/rev1/info.json b/keyboards/takashiski/namecard2x4/rev1/info.json index 28781bcd0a..1c727d924f 100644 --- a/keyboards/takashiski/namecard2x4/rev1/info.json +++ b/keyboards/takashiski/namecard2x4/rev1/info.json @@ -1,4 +1,10 @@ { + "rgblight": { + "hue_steps": 10, + "saturation_steps": 10, + "brightness_steps": 10, + "led_count": 4 + }, "ws2812": { "pin": "F4" }, diff --git a/keyboards/takashiski/namecard2x4/rev2/config.h b/keyboards/takashiski/namecard2x4/rev2/config.h index f90b4e073c..58233619a2 100644 --- a/keyboards/takashiski/namecard2x4/rev2/config.h +++ b/keyboards/takashiski/namecard2x4/rev2/config.h @@ -17,7 +17,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #pragma once -#define RGBLED_NUM 8 #define RGBLIGHT_EFFECT_BREATHING #define RGBLIGHT_EFFECT_RAINBOW_MOOD #define RGBLIGHT_EFFECT_RAINBOW_SWIRL @@ -28,9 +27,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #define RGBLIGHT_EFFECT_RGB_TEST #define RGBLIGHT_EFFECT_ALTERNATING #define RGBLIGHT_EFFECT_TWINKLE -#define RGBLIGHT_HUE_STEP 10 -#define RGBLIGHT_SAT_STEP 10 -#define RGBLIGHT_VAL_STEP 10 /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ #define LOCKING_SUPPORT_ENABLE diff --git a/keyboards/takashiski/namecard2x4/rev2/info.json b/keyboards/takashiski/namecard2x4/rev2/info.json index 51fe26c555..b717cef42d 100644 --- a/keyboards/takashiski/namecard2x4/rev2/info.json +++ b/keyboards/takashiski/namecard2x4/rev2/info.json @@ -1,4 +1,10 @@ { + "rgblight": { + "hue_steps": 10, + "saturation_steps": 10, + "brightness_steps": 10, + "led_count": 8 + }, "ws2812": { "pin": "D4" }, diff --git a/keyboards/taleguers/taleguers75/config.h b/keyboards/taleguers/taleguers75/config.h index b62209abaa..516f568f11 100644 --- a/keyboards/taleguers/taleguers75/config.h +++ b/keyboards/taleguers/taleguers75/config.h @@ -32,9 +32,3 @@ #define RGBLIGHT_EFFECT_RGB_TEST #define RGBLIGHT_EFFECT_ALTERNATING #define RGBLIGHT_EFFECT_TWINKLE -#define RGBLED_NUM 6 -#define RGBLIGHT_LED_MAP { 5, 4, 3, 2, 1, 0 } -#define RGBLIGHT_HUE_STEP 8 -#define RGBLIGHT_SAT_STEP 8 -#define RGBLIGHT_VAL_STEP 8 -#define RGBLIGHT_SLEEP diff --git a/keyboards/taleguers/taleguers75/info.json b/keyboards/taleguers/taleguers75/info.json index 229894fa9d..711fa3821a 100644 --- a/keyboards/taleguers/taleguers75/info.json +++ b/keyboards/taleguers/taleguers75/info.json @@ -18,6 +18,13 @@ {"pin_a": "B6", "pin_b": "B5"} ] }, + "rgblight": { + "saturation_steps": 8, + "brightness_steps": 8, + "led_count": 6, + "sleep": true, + "led_map": [5, 4, 3, 2, 1, 0] + }, "ws2812": { "pin": "D3" }, diff --git a/keyboards/tanuki/config.h b/keyboards/tanuki/config.h index 305eacfd35..57fad54e73 100644 --- a/keyboards/tanuki/config.h +++ b/keyboards/tanuki/config.h @@ -32,13 +32,7 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #define RGBLIGHT_EFFECT_RGB_TEST #define RGBLIGHT_EFFECT_ALTERNATING #define RGBLIGHT_EFFECT_TWINKLE -#define RGBLED_NUM 5 -#define RGBLIGHT_HUE_STEP 10 -#define RGBLIGHT_SAT_STEP 17 -#define RGBLIGHT_VAL_STEP 17 -#define RGBLIGHT_SLEEP -#define TAPPING_TERM 200 /* * Feature disable options * These options are also useful to firmware size reduction. diff --git a/keyboards/tanuki/info.json b/keyboards/tanuki/info.json index 8a858cf4f0..17a0ab3851 100644 --- a/keyboards/tanuki/info.json +++ b/keyboards/tanuki/info.json @@ -8,6 +8,11 @@ "pid": "0x6464", "device_version": "0.0.1" }, + "rgblight": { + "hue_steps": 10, + "led_count": 5, + "sleep": true + }, "ws2812": { "pin": "D1" }, diff --git a/keyboards/teahouse/ayleen/config.h b/keyboards/teahouse/ayleen/config.h index 84559bb7bd..6ff56589b3 100644 --- a/keyboards/teahouse/ayleen/config.h +++ b/keyboards/teahouse/ayleen/config.h @@ -3,13 +3,8 @@ #pragma once - #define RGBLED_NUM 2 - #define RGBLIGHT_HUE_STEP 8 - #define RGBLIGHT_SAT_STEP 8 - #define RGBLIGHT_VAL_STEP 8 #define RGBLIGHT_LAYERS 2 #define RGBLIGHT_LAYER_BLINK - #define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */ // generated by KBFirmware JSON to QMK Parser // https://noroadsleft.github.io/kbf_qmk_converter/ diff --git a/keyboards/teahouse/ayleen/info.json b/keyboards/teahouse/ayleen/info.json index e979b07e89..04baad7d00 100644 --- a/keyboards/teahouse/ayleen/info.json +++ b/keyboards/teahouse/ayleen/info.json @@ -19,6 +19,12 @@ "rows": ["F0", "F1", "F4", "F5", "D4", "B0", "B1", "B2", "F7", "D5", "D3"], "cols": ["F6", "D0", "D1", "D2", "D6", "D7", "B4", "B5", "B6"] }, + "rgblight": { + "saturation_steps": 8, + "brightness_steps": 8, + "led_count": 2, + "sleep": true + }, "ws2812": { "pin": "C7" }, diff --git a/keyboards/team0110/p1800fl/config.h b/keyboards/team0110/p1800fl/config.h index 99f4d6ce2c..6607a5ef2f 100644 --- a/keyboards/team0110/p1800fl/config.h +++ b/keyboards/team0110/p1800fl/config.h @@ -28,11 +28,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. # define RGBLIGHT_EFFECT_RGB_TEST # define RGBLIGHT_EFFECT_ALTERNATING # define RGBLIGHT_EFFECT_TWINKLE -# define RGBLED_NUM 8 -# define RGBLIGHT_HUE_STEP 8 -# define RGBLIGHT_SAT_STEP 8 -# define RGBLIGHT_VAL_STEP 8 -# define RGBLIGHT_SLEEP /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ #define LOCKING_SUPPORT_ENABLE diff --git a/keyboards/team0110/p1800fl/info.json b/keyboards/team0110/p1800fl/info.json index 2509fcdd8e..c5c350204a 100644 --- a/keyboards/team0110/p1800fl/info.json +++ b/keyboards/team0110/p1800fl/info.json @@ -18,6 +18,12 @@ "levels": 5, "breathing": true }, + "rgblight": { + "saturation_steps": 8, + "brightness_steps": 8, + "led_count": 8, + "sleep": true + }, "ws2812": { "pin": "C6" }, diff --git a/keyboards/technika/config.h b/keyboards/technika/config.h index fb143fc76a..3717a6d07c 100644 --- a/keyboards/technika/config.h +++ b/keyboards/technika/config.h @@ -22,8 +22,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. /* Locking resynchronize hack */ #define LOCKING_RESYNC_ENABLE -#define RGBLED_NUM 16 -#define RGBLIGHT_SLEEP #define RGBLIGHT_EFFECT_BREATHING #define RGBLIGHT_EFFECT_RAINBOW_MOOD #define RGBLIGHT_EFFECT_RAINBOW_SWIRL diff --git a/keyboards/technika/info.json b/keyboards/technika/info.json index 31c0ab96b4..aef2e84002 100644 --- a/keyboards/technika/info.json +++ b/keyboards/technika/info.json @@ -22,7 +22,9 @@ "pin": "B15" }, "rgblight": { - "max_brightness": 200 + "led_count": 16, + "max_brightness": 200, + "sleep": true }, "processor": "STM32F072", "bootloader": "stm32-dfu", diff --git a/keyboards/technika/rules.mk b/keyboards/technika/rules.mk index 98fc7315de..4d4628146a 100644 --- a/keyboards/technika/rules.mk +++ b/keyboards/technika/rules.mk @@ -12,5 +12,3 @@ RGBLIGHT_ENABLE = yes # Enable keyboard RGB underglow AUDIO_ENABLE = no # Audio output ENCODER_ENABLE = no -# Enter lower-power sleep mode when on the ChibiOS idle thread -OPT_DEFS += -DCORTEX_ENABLE_WFI_IDLE=TRUE diff --git a/keyboards/tenki/config.h b/keyboards/tenki/config.h index 2b7b6435ec..ab095e7c1e 100644 --- a/keyboards/tenki/config.h +++ b/keyboards/tenki/config.h @@ -18,8 +18,3 @@ #define RGBLIGHT_EFFECT_RGB_TEST #define RGBLIGHT_EFFECT_ALTERNATING #define RGBLIGHT_EFFECT_TWINKLE -#define RGBLED_NUM 3 // Number of LEDs -#define RGBLIGHT_HUE_STEP 10 -#define RGBLIGHT_SAT_STEP 10 -#define RGBLIGHT_VAL_STEP 10 -#define RGBLIGHT_SLEEP diff --git a/keyboards/tenki/info.json b/keyboards/tenki/info.json index 8acbd24f8b..14aac828f2 100644 --- a/keyboards/tenki/info.json +++ b/keyboards/tenki/info.json @@ -8,6 +8,13 @@ "pid": "0x5445", "device_version": "10.0.1" }, + "rgblight": { + "hue_steps": 10, + "saturation_steps": 10, + "brightness_steps": 10, + "led_count": 3, + "sleep": true + }, "ws2812": { "pin": "D1" }, diff --git a/keyboards/tetris/config.h b/keyboards/tetris/config.h index 3f0378e73c..39265d6184 100755 --- a/keyboards/tetris/config.h +++ b/keyboards/tetris/config.h @@ -22,9 +22,4 @@ #define RGBLIGHT_EFFECT_RGB_TEST #define RGBLIGHT_EFFECT_ALTERNATING #define RGBLIGHT_EFFECT_TWINKLE -#define RGBLIGHT_SLEEP -#define RGBLED_NUM 47 -#define RGBLIGHT_HUE_STEP 8 -#define RGBLIGHT_SAT_STEP 8 -#define RGBLIGHT_VAL_STEP 8 #define RGBLIGHT_EFFECT_KNIGHT_LED_NUM 12 diff --git a/keyboards/tetris/info.json b/keyboards/tetris/info.json index c7d90ef148..962b086b9b 100644 --- a/keyboards/tetris/info.json +++ b/keyboards/tetris/info.json @@ -8,6 +8,12 @@ "pid": "0x6060", "device_version": "0.0.1" }, + "rgblight": { + "saturation_steps": 8, + "brightness_steps": 8, + "led_count": 47, + "sleep": true + }, "ws2812": { "pin": "F5" }, diff --git a/keyboards/tg4x/config.h b/keyboards/tg4x/config.h index 20a2c414b3..c43ea48906 100644 --- a/keyboards/tg4x/config.h +++ b/keyboards/tg4x/config.h @@ -17,11 +17,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #pragma once - #define RGBLED_NUM 7 - #define RGBLIGHT_HUE_STEP 8 - #define RGBLIGHT_SAT_STEP 8 - #define RGBLIGHT_VAL_STEP 8 - #define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */ #define RGBLIGHT_EFFECT_BREATHING #define RGBLIGHT_EFFECT_RAINBOW_MOOD #define RGBLIGHT_EFFECT_RAINBOW_SWIRL diff --git a/keyboards/tg4x/info.json b/keyboards/tg4x/info.json index a3e464a110..20920c9dc4 100644 --- a/keyboards/tg4x/info.json +++ b/keyboards/tg4x/info.json @@ -8,6 +8,12 @@ "pid": "0x0458", "device_version": "0.2.1" }, + "rgblight": { + "saturation_steps": 8, + "brightness_steps": 8, + "led_count": 7, + "sleep": true + }, "ws2812": { "pin": "D2" }, diff --git a/keyboards/tgr/910/config.h b/keyboards/tgr/910/config.h index 2021d94bb4..7e1218690b 100644 --- a/keyboards/tgr/910/config.h +++ b/keyboards/tgr/910/config.h @@ -17,9 +17,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #pragma once - -#define RGBLED_NUM 19 - #define RGBLIGHT_EFFECT_BREATHING #define RGBLIGHT_EFFECT_RAINBOW_MOOD #define RGBLIGHT_EFFECT_RAINBOW_SWIRL diff --git a/keyboards/tgr/910/info.json b/keyboards/tgr/910/info.json index ae6ffb5a24..2ad4ca9cb2 100644 --- a/keyboards/tgr/910/info.json +++ b/keyboards/tgr/910/info.json @@ -16,6 +16,9 @@ "backlight": { "pin": "D4" }, + "rgblight": { + "led_count": 19 + }, "ws2812": { "driver": "i2c" }, diff --git a/keyboards/tgr/910ce/config.h b/keyboards/tgr/910ce/config.h index 44fff35e61..bf084f49fa 100644 --- a/keyboards/tgr/910ce/config.h +++ b/keyboards/tgr/910ce/config.h @@ -17,9 +17,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #pragma once - -#define RGBLED_NUM 18 - #define RGBLIGHT_EFFECT_BREATHING #define RGBLIGHT_EFFECT_RAINBOW_MOOD #define RGBLIGHT_EFFECT_RAINBOW_SWIRL diff --git a/keyboards/tgr/910ce/info.json b/keyboards/tgr/910ce/info.json index c58438887a..f93b5d2221 100644 --- a/keyboards/tgr/910ce/info.json +++ b/keyboards/tgr/910ce/info.json @@ -16,6 +16,9 @@ "backlight": { "pin": "D4" }, + "rgblight": { + "led_count": 18 + }, "ws2812": { "driver": "i2c" }, diff --git a/keyboards/tgr/alice/config.h b/keyboards/tgr/alice/config.h index cf8aa33045..d849732a07 100644 --- a/keyboards/tgr/alice/config.h +++ b/keyboards/tgr/alice/config.h @@ -17,7 +17,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #pragma once -#define RGBLED_NUM 18 #define RGBLIGHT_EFFECT_BREATHING #define RGBLIGHT_EFFECT_RAINBOW_MOOD #define RGBLIGHT_EFFECT_RAINBOW_SWIRL diff --git a/keyboards/tgr/alice/info.json b/keyboards/tgr/alice/info.json index 7d6a0fbc14..356719df15 100644 --- a/keyboards/tgr/alice/info.json +++ b/keyboards/tgr/alice/info.json @@ -16,6 +16,9 @@ "backlight": { "pin": "D4" }, + "rgblight": { + "led_count": 18 + }, "ws2812": { "driver": "i2c" }, diff --git a/keyboards/tgr/tris/config.h b/keyboards/tgr/tris/config.h index f517c91d19..7e1218690b 100644 --- a/keyboards/tgr/tris/config.h +++ b/keyboards/tgr/tris/config.h @@ -17,7 +17,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #pragma once -#define RGBLED_NUM 6 #define RGBLIGHT_EFFECT_BREATHING #define RGBLIGHT_EFFECT_RAINBOW_MOOD #define RGBLIGHT_EFFECT_RAINBOW_SWIRL diff --git a/keyboards/tgr/tris/info.json b/keyboards/tgr/tris/info.json index f628405bcb..ab1defbf40 100644 --- a/keyboards/tgr/tris/info.json +++ b/keyboards/tgr/tris/info.json @@ -16,6 +16,9 @@ "backlight": { "pin": "D4" }, + "rgblight": { + "led_count": 6 + }, "ws2812": { "driver": "i2c" }, diff --git a/keyboards/the_royal/liminal/config.h b/keyboards/the_royal/liminal/config.h index 02c222b2b8..fa9a83d08e 100644 --- a/keyboards/the_royal/liminal/config.h +++ b/keyboards/the_royal/liminal/config.h @@ -4,10 +4,3 @@ #define LOCKING_SUPPORT_ENABLE /* Locking resynchronize hack */ #define LOCKING_RESYNC_ENABLE - -/* ws2812 RGB LED */ -#define RGBLED_NUM 1 // Number of LEDs - -#define RGBLIGHT_HUE_STEP 6 -#define RGBLIGHT_SAT_STEP 4 -#define RGBLIGHT_VAL_STEP 4 diff --git a/keyboards/the_royal/liminal/info.json b/keyboards/the_royal/liminal/info.json index c62699df84..046d535e4a 100644 --- a/keyboards/the_royal/liminal/info.json +++ b/keyboards/the_royal/liminal/info.json @@ -8,6 +8,12 @@ "pid": "0x0003", "device_version": "0.0.1" }, + "rgblight": { + "hue_steps": 6, + "saturation_steps": 4, + "brightness_steps": 4, + "led_count": 1 + }, "ws2812": { "pin": "D4" }, diff --git a/keyboards/the_royal/schwann/config.h b/keyboards/the_royal/schwann/config.h index 8cfda8f8e5..85cbd30a42 100644 --- a/keyboards/the_royal/schwann/config.h +++ b/keyboards/the_royal/schwann/config.h @@ -5,9 +5,6 @@ /* Locking resynchronize hack */ #define LOCKING_RESYNC_ENABLE -/* ws2812 RGB LED */ -#define RGBLED_NUM 8 // Number of LEDs - #define RGBLIGHT_EFFECT_BREATHING #define RGBLIGHT_EFFECT_RAINBOW_MOOD #define RGBLIGHT_EFFECT_RAINBOW_SWIRL @@ -18,6 +15,3 @@ #define RGBLIGHT_EFFECT_RGB_TEST #define RGBLIGHT_EFFECT_ALTERNATING #define RGBLIGHT_EFFECT_TWINKLE -#define RGBLIGHT_HUE_STEP 6 -#define RGBLIGHT_SAT_STEP 4 -#define RGBLIGHT_VAL_STEP 8 diff --git a/keyboards/the_royal/schwann/info.json b/keyboards/the_royal/schwann/info.json index df765f747c..2748dac98d 100644 --- a/keyboards/the_royal/schwann/info.json +++ b/keyboards/the_royal/schwann/info.json @@ -8,6 +8,12 @@ "pid": "0x3521", "device_version": "0.0.1" }, + "rgblight": { + "hue_steps": 6, + "saturation_steps": 4, + "brightness_steps": 8, + "led_count": 8 + }, "ws2812": { "pin": "B3" }, diff --git a/keyboards/themadnoodle/ncc1701kb/v2/config.h b/keyboards/themadnoodle/ncc1701kb/v2/config.h index 3c3b68d782..f08a0cdc2c 100644 --- a/keyboards/themadnoodle/ncc1701kb/v2/config.h +++ b/keyboards/themadnoodle/ncc1701kb/v2/config.h @@ -18,8 +18,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #pragma once /* RGB BackLight */ -#define RGBLED_NUM 4 -#define RGBLIGHT_SLEEP #define RGBLIGHT_EFFECT_BREATHING #define RGBLIGHT_EFFECT_RAINBOW_MOOD #define RGBLIGHT_EFFECT_RAINBOW_SWIRL diff --git a/keyboards/themadnoodle/ncc1701kb/v2/info.json b/keyboards/themadnoodle/ncc1701kb/v2/info.json index e769b23f12..47c9c37c91 100644 --- a/keyboards/themadnoodle/ncc1701kb/v2/info.json +++ b/keyboards/themadnoodle/ncc1701kb/v2/info.json @@ -18,6 +18,10 @@ {"pin_a": "D0", "pin_b": "D1"} ] }, + "rgblight": { + "led_count": 4, + "sleep": true + }, "ws2812": { "pin": "B7" }, diff --git a/keyboards/themadnoodle/noodlepad/config.h b/keyboards/themadnoodle/noodlepad/config.h index 3c3b68d782..f08a0cdc2c 100644 --- a/keyboards/themadnoodle/noodlepad/config.h +++ b/keyboards/themadnoodle/noodlepad/config.h @@ -18,8 +18,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #pragma once /* RGB BackLight */ -#define RGBLED_NUM 4 -#define RGBLIGHT_SLEEP #define RGBLIGHT_EFFECT_BREATHING #define RGBLIGHT_EFFECT_RAINBOW_MOOD #define RGBLIGHT_EFFECT_RAINBOW_SWIRL diff --git a/keyboards/themadnoodle/noodlepad/info.json b/keyboards/themadnoodle/noodlepad/info.json index e605034697..5e9b8b91b8 100644 --- a/keyboards/themadnoodle/noodlepad/info.json +++ b/keyboards/themadnoodle/noodlepad/info.json @@ -18,6 +18,10 @@ {"pin_a": "D0", "pin_b": "D1"} ] }, + "rgblight": { + "led_count": 4, + "sleep": true + }, "ws2812": { "pin": "B7" }, diff --git a/keyboards/thevankeyboards/bananasplit/config.h b/keyboards/thevankeyboards/bananasplit/config.h index d9dc5a8401..c2949ab3a7 100644 --- a/keyboards/thevankeyboards/bananasplit/config.h +++ b/keyboards/thevankeyboards/bananasplit/config.h @@ -17,8 +17,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #pragma once -#define TAPPING_TERM 175 - /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ #define LOCKING_SUPPORT_ENABLE /* Locking resynchronize hack */ diff --git a/keyboards/thevankeyboards/bananasplit/info.json b/keyboards/thevankeyboards/bananasplit/info.json index 37f5dec719..36fcc06af2 100644 --- a/keyboards/thevankeyboards/bananasplit/info.json +++ b/keyboards/thevankeyboards/bananasplit/info.json @@ -16,6 +16,9 @@ "backlight": { "pin": "B7" }, + "tapping": { + "term": 175 + }, "processor": "atmega32u4", "bootloader": "atmel-dfu", "community_layouts": ["60_ansi", "60_iso"], diff --git a/keyboards/thevankeyboards/bananasplit/keymaps/coloneljesus/keymap.c b/keyboards/thevankeyboards/bananasplit/keymaps/coloneljesus/keymap.c index abdb791c6f..2d65ae102b 100644 --- a/keyboards/thevankeyboards/bananasplit/keymaps/coloneljesus/keymap.c +++ b/keyboards/thevankeyboards/bananasplit/keymaps/coloneljesus/keymap.c @@ -62,14 +62,6 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { ), }; -void matrix_init_user(void) { - -} - -void matrix_scan_user(void) { - -} - bool process_record_user(uint16_t keycode, keyrecord_t *record) { switch (keycode) { @@ -86,7 +78,3 @@ bool process_record_user(uint16_t keycode, keyrecord_t *record) { return true; } } - -void led_set_user(uint8_t usb_led) { - -} diff --git a/keyboards/thevankeyboards/bananasplit/keymaps/jockyxu1122_iso/keymap.c b/keyboards/thevankeyboards/bananasplit/keymaps/jockyxu1122_iso/keymap.c index 1472f88212..5146c8f4f3 100644 --- a/keyboards/thevankeyboards/bananasplit/keymaps/jockyxu1122_iso/keymap.c +++ b/keyboards/thevankeyboards/bananasplit/keymaps/jockyxu1122_iso/keymap.c @@ -91,12 +91,13 @@ Capslock's led cannot be controlled separately on bananasplit and you can only t leds at once. If you only install led for capslock, it will look like capslock has toggable backlight. */ -void led_set_user(uint8_t usb_led) { - if (usb_led && (1 << USB_LED_CAPS_LOCK)) { +bool led_update_user(led_t led_state) { + if (led_state.caps_lock) { DDRB |= (1 << 7); PORTB |= (1 << 7); } else { DDRB &= ~(1 << 7); PORTB &= ~(1 << 7); } + return false; } diff --git a/keyboards/thevankeyboards/jetvan/config.h b/keyboards/thevankeyboards/jetvan/config.h index e8aca5e862..ecb3e01760 100644 --- a/keyboards/thevankeyboards/jetvan/config.h +++ b/keyboards/thevankeyboards/jetvan/config.h @@ -23,7 +23,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #define LOCKING_RESYNC_ENABLE /* Define RGB Underglow */ -#define RGBLED_NUM 10 #define RGBLIGHT_EFFECT_BREATHING #define RGBLIGHT_EFFECT_RAINBOW_MOOD #define RGBLIGHT_EFFECT_RAINBOW_SWIRL diff --git a/keyboards/thevankeyboards/jetvan/info.json b/keyboards/thevankeyboards/jetvan/info.json index 80281fef1f..ed6896dc2e 100644 --- a/keyboards/thevankeyboards/jetvan/info.json +++ b/keyboards/thevankeyboards/jetvan/info.json @@ -8,6 +8,9 @@ "pid": "0x8858", "device_version": "0.0.1" }, + "rgblight": { + "led_count": 10 + }, "ws2812": { "pin": "D0" }, diff --git a/keyboards/thevankeyboards/minivan/config.h b/keyboards/thevankeyboards/minivan/config.h index 44b61b7458..5070f05156 100644 --- a/keyboards/thevankeyboards/minivan/config.h +++ b/keyboards/thevankeyboards/minivan/config.h @@ -21,7 +21,3 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #define LOCKING_SUPPORT_ENABLE /* Locking resynchronize hack */ #define LOCKING_RESYNC_ENABLE - -/* RGB Setup */ -#define RGBLED_NUM 3 -#define RGBLIGHT_SLEEP diff --git a/keyboards/thevankeyboards/minivan/info.json b/keyboards/thevankeyboards/minivan/info.json index c20ad5427e..cff65e6fed 100644 --- a/keyboards/thevankeyboards/minivan/info.json +++ b/keyboards/thevankeyboards/minivan/info.json @@ -8,6 +8,10 @@ "pid": "0x8844", "device_version": "0.0.2" }, + "rgblight": { + "led_count": 3, + "sleep": true + }, "ws2812": { "pin": "D0" }, diff --git a/keyboards/thevankeyboards/minivan/keymaps/josjoha/keymap.c b/keyboards/thevankeyboards/minivan/keymaps/josjoha/keymap.c index a1d82e9923..145da6b2a5 100644 --- a/keyboards/thevankeyboards/minivan/keymaps/josjoha/keymap.c +++ b/keyboards/thevankeyboards/minivan/keymaps/josjoha/keymap.c @@ -40,7 +40,7 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. * accented characters are defined in unicode_weurope.h * * Unicode macros facilitate recomputing for re-computing the Dvorak with changed letters - * ('descramble'), and exist because space ran out for * XP(…). + * ('descramble'), and exist because space ran out for * UP(…). * * The led color code might be a bit hairy, due to speed/count middle led overlapping layer color. * diff --git a/keyboards/thevankeyboards/minivan/keymaps/josjoha/unicode_macros.c b/keyboards/thevankeyboards/minivan/keymaps/josjoha/unicode_macros.c index f4416ca797..ddd37c89e3 100644 --- a/keyboards/thevankeyboards/minivan/keymaps/josjoha/unicode_macros.c +++ b/keyboards/thevankeyboards/minivan/keymaps/josjoha/unicode_macros.c @@ -2022,7 +2022,7 @@ bool process_record_user(uint16_t keycode, keyrecord_t *record) { # endif // REMOVE_DRA - /* _BON layer definitions. Due to running out of X(…), XP(…) space.*/ + /* _BON layer definitions. */ // ------------------------- row 4 # ifndef REMOVE_BON // Removes this layer entirely, if set. diff --git a/keyboards/tkc/candybar/lefty/rules.mk b/keyboards/tkc/candybar/lefty/rules.mk index 36101d2f8e..51c822797a 100644 --- a/keyboards/tkc/candybar/lefty/rules.mk +++ b/keyboards/tkc/candybar/lefty/rules.mk @@ -13,5 +13,3 @@ AUDIO_ENABLE = no RGBLIGHT_ENABLE = no -# Enter lower-power sleep mode when on the ChibiOS idle thread -OPT_DEFS += -DCORTEX_ENABLE_WFI_IDLE=TRUE diff --git a/keyboards/tkc/candybar/righty/rules.mk b/keyboards/tkc/candybar/righty/rules.mk index 36101d2f8e..51c822797a 100644 --- a/keyboards/tkc/candybar/righty/rules.mk +++ b/keyboards/tkc/candybar/righty/rules.mk @@ -13,5 +13,3 @@ AUDIO_ENABLE = no RGBLIGHT_ENABLE = no -# Enter lower-power sleep mode when on the ChibiOS idle thread -OPT_DEFS += -DCORTEX_ENABLE_WFI_IDLE=TRUE diff --git a/keyboards/tkc/godspeed75/config.h b/keyboards/tkc/godspeed75/config.h index e995bb1c7c..3f67f77910 100644 --- a/keyboards/tkc/godspeed75/config.h +++ b/keyboards/tkc/godspeed75/config.h @@ -32,7 +32,6 @@ //#define NO_ACTION_TAPPING //#define NO_ACTION_ONESHOT -#define RGBLED_NUM 14 #define RGBLIGHT_EFFECT_BREATHING #define RGBLIGHT_EFFECT_RAINBOW_MOOD #define RGBLIGHT_EFFECT_RAINBOW_SWIRL diff --git a/keyboards/tkc/godspeed75/info.json b/keyboards/tkc/godspeed75/info.json index 4e45459bb9..6565239b52 100644 --- a/keyboards/tkc/godspeed75/info.json +++ b/keyboards/tkc/godspeed75/info.json @@ -8,6 +8,9 @@ "pid": "0x0006", "device_version": "0.0.1" }, + "rgblight": { + "led_count": 14 + }, "ws2812": { "pin": "A13" }, diff --git a/keyboards/tkc/godspeed75/rules.mk b/keyboards/tkc/godspeed75/rules.mk index 0f15f10b20..0098dc473a 100644 --- a/keyboards/tkc/godspeed75/rules.mk +++ b/keyboards/tkc/godspeed75/rules.mk @@ -11,5 +11,3 @@ BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality RGBLIGHT_ENABLE = yes # Enable keyboard RGB underglow AUDIO_ENABLE = no # Audio output -# Enter lower-power sleep mode when on the ChibiOS idle thread -OPT_DEFS += -DCORTEX_ENABLE_WFI_IDLE=TRUE diff --git a/keyboards/tkc/m0lly/config.h b/keyboards/tkc/m0lly/config.h index bad0f51bde..06338d2a2d 100644 --- a/keyboards/tkc/m0lly/config.h +++ b/keyboards/tkc/m0lly/config.h @@ -17,11 +17,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #pragma once -# define RGBLED_NUM 30 -# define RGBLIGHT_HUE_STEP 5 -# define RGBLIGHT_SAT_STEP 10 -# define RGBLIGHT_VAL_STEP 10 -//# define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */ # define RGBLIGHT_EFFECT_BREATHING # define RGBLIGHT_EFFECT_RAINBOW_MOOD # define RGBLIGHT_EFFECT_RAINBOW_SWIRL diff --git a/keyboards/tkc/m0lly/info.json b/keyboards/tkc/m0lly/info.json index 37a8c19bf8..302cbb54c1 100644 --- a/keyboards/tkc/m0lly/info.json +++ b/keyboards/tkc/m0lly/info.json @@ -27,6 +27,12 @@ "num_lock": "D2", "scroll_lock": "D4" }, + "rgblight": { + "hue_steps": 5, + "saturation_steps": 10, + "brightness_steps": 10, + "led_count": 30 + }, "ws2812": { "pin": "D7" }, diff --git a/keyboards/tkc/osav2/config.h b/keyboards/tkc/osav2/config.h index f2a7de800b..77a7393d75 100644 --- a/keyboards/tkc/osav2/config.h +++ b/keyboards/tkc/osav2/config.h @@ -17,11 +17,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #pragma once - #define RGBLED_NUM 9 -// #define RGBLIGHT_HUE_STEP 10 -// #define RGBLIGHT_SAT_STEP 17 -// #define RGBLIGHT_VAL_STEP 17 - #define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */ #define RGBLIGHT_EFFECT_BREATHING #define RGBLIGHT_EFFECT_RAINBOW_MOOD #define RGBLIGHT_EFFECT_RAINBOW_SWIRL diff --git a/keyboards/tkc/osav2/info.json b/keyboards/tkc/osav2/info.json index 78cad2daf2..7a59bb65db 100644 --- a/keyboards/tkc/osav2/info.json +++ b/keyboards/tkc/osav2/info.json @@ -8,6 +8,10 @@ "pid": "0x0005", "device_version": "0.0.1" }, + "rgblight": { + "led_count": 9, + "sleep": true + }, "ws2812": { "pin": "D4" }, diff --git a/keyboards/tkc/portico75/info.json b/keyboards/tkc/portico75/info.json index 4380caba4f..171228cb28 100644 --- a/keyboards/tkc/portico75/info.json +++ b/keyboards/tkc/portico75/info.json @@ -113,97 +113,6 @@ {"matrix": [5, 12], "x": 14.25, "y": 5.5}, {"matrix": [5, 13], "x": 15.25, "y": 5.5} ] - }, - "LAYOUT_75_via": { - "layout": [ - {"matrix": [0, 0], "x": 0, "y": 0}, - {"matrix": [0, 1], "x": 1, "y": 0}, - {"matrix": [0, 2], "x": 2, "y": 0}, - {"matrix": [0, 3], "x": 3, "y": 0}, - {"matrix": [0, 4], "x": 4, "y": 0}, - {"matrix": [0, 5], "x": 5, "y": 0}, - {"matrix": [0, 6], "x": 6, "y": 0}, - {"matrix": [0, 7], "x": 7, "y": 0}, - {"matrix": [0, 8], "x": 8, "y": 0}, - {"matrix": [0, 9], "x": 9, "y": 0}, - {"matrix": [0, 10], "x": 10, "y": 0}, - {"matrix": [0, 11], "x": 11, "y": 0}, - {"matrix": [0, 12], "x": 12, "y": 0}, - {"matrix": [0, 13], "x": 13, "y": 0}, - {"matrix": [0, 14], "x": 14, "y": 0}, - - {"matrix": [1, 0], "x": 15, "y": 0}, - {"matrix": [1, 1], "x": 16, "y": 0}, - {"matrix": [1, 2], "x": 17, "y": 0}, - {"matrix": [1, 3], "x": 18, "y": 0}, - {"matrix": [1, 4], "x": 19, "y": 0}, - {"matrix": [1, 5], "x": 20, "y": 0}, - {"matrix": [1, 6], "x": 21, "y": 0}, - {"matrix": [1, 7], "x": 22, "y": 0}, - {"matrix": [1, 8], "x": 23, "y": 0}, - {"matrix": [1, 9], "x": 24, "y": 0}, - {"matrix": [1, 10], "x": 25, "y": 0}, - {"matrix": [1, 11], "x": 26, "y": 0}, - {"matrix": [1, 12], "x": 27, "y": 0}, - {"matrix": [1, 13], "x": 28, "y": 0}, - {"matrix": [1, 14], "x": 29, "y": 0}, - - {"matrix": [2, 0], "x": 30, "y": 0}, - {"matrix": [2, 1], "x": 31, "y": 0}, - {"matrix": [2, 2], "x": 32, "y": 0}, - {"matrix": [2, 3], "x": 33, "y": 0}, - {"matrix": [2, 4], "x": 34, "y": 0}, - {"matrix": [2, 5], "x": 35, "y": 0}, - {"matrix": [2, 6], "x": 36, "y": 0}, - {"matrix": [2, 7], "x": 37, "y": 0}, - {"matrix": [2, 8], "x": 38, "y": 0}, - {"matrix": [2, 9], "x": 39, "y": 0}, - {"matrix": [2, 10], "x": 40, "y": 0}, - {"matrix": [2, 11], "x": 41, "y": 0}, - {"matrix": [2, 12], "x": 42, "y": 0}, - {"matrix": [2, 13], "x": 43, "y": 0}, - {"matrix": [2, 14], "x": 44, "y": 0}, - - {"matrix": [3, 0], "x": 45, "y": 0}, - {"matrix": [3, 1], "x": 46, "y": 0}, - {"matrix": [3, 2], "x": 47, "y": 0}, - {"matrix": [3, 3], "x": 48, "y": 0}, - {"matrix": [3, 4], "x": 49, "y": 0}, - {"matrix": [3, 5], "x": 50, "y": 0}, - {"matrix": [3, 6], "x": 51, "y": 0}, - {"matrix": [3, 7], "x": 52, "y": 0}, - {"matrix": [3, 8], "x": 53, "y": 0}, - {"matrix": [3, 9], "x": 54, "y": 0}, - {"matrix": [3, 10], "x": 55, "y": 0}, - {"matrix": [3, 11], "x": 56, "y": 0}, - {"matrix": [3, 12], "x": 57, "y": 0}, - {"matrix": [3, 14], "x": 58, "y": 0}, - - {"matrix": [4, 0], "x": 59, "y": 0}, - {"matrix": [4, 1], "x": 60, "y": 0}, - {"matrix": [4, 2], "x": 61, "y": 0}, - {"matrix": [4, 3], "x": 62, "y": 0}, - {"matrix": [4, 4], "x": 63, "y": 0}, - {"matrix": [4, 5], "x": 64, "y": 0}, - {"matrix": [4, 6], "x": 65, "y": 0}, - {"matrix": [4, 7], "x": 66, "y": 0}, - {"matrix": [4, 8], "x": 67, "y": 0}, - {"matrix": [4, 9], "x": 68, "y": 0}, - {"matrix": [4, 10], "x": 69, "y": 0}, - {"matrix": [4, 11], "x": 70, "y": 0}, - {"matrix": [4, 12], "x": 71, "y": 0}, - {"matrix": [4, 14], "x": 72, "y": 0}, - - {"matrix": [5, 0], "x": 73, "y": 0}, - {"matrix": [5, 1], "x": 74, "y": 0}, - {"matrix": [5, 2], "x": 75, "y": 0}, - {"matrix": [5, 5], "x": 76, "y": 0}, - {"matrix": [5, 9], "x": 77, "y": 0}, - {"matrix": [5, 10], "x": 78, "y": 0}, - {"matrix": [5, 11], "x": 79, "y": 0}, - {"matrix": [5, 12], "x": 80, "y": 0}, - {"matrix": [5, 13], "x": 81, "y": 0} - ] } } } diff --git a/keyboards/tkc/portico75/keymaps/via/keymap.c b/keyboards/tkc/portico75/keymaps/via/keymap.c index befb3b8829..03e96a2706 100644 --- a/keyboards/tkc/portico75/keymaps/via/keymap.c +++ b/keyboards/tkc/portico75/keymaps/via/keymap.c @@ -27,47 +27,47 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. // BR_INC, BR_DEC, // backlight brightness increase/decrease const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { - [0] = LAYOUT_75_via( + [0] = LAYOUT_75_ansi( KC_ESC, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_PSCR, KC_MUTE, KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_HOME, KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_DEL, - KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, KC_VOLD, - KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_UP, KC_VOLU, + KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, + KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_UP, KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_RALT, MO(1), KC_LEFT, KC_DOWN, KC_RGHT ), #ifdef RGB_BACKLIGHT_PORTICO75 - [1] = LAYOUT_75_via( + [1] = LAYOUT_75_ansi( _______, EF_INC, EF_DEC, H1_INC, H1_DEC, S1_INC, S1_DEC, H2_INC, H2_DEC, S2_INC, S2_DEC, BR_INC, BR_DEC, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, - _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, - _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______ ), #else - [1] = LAYOUT_75_via( + [1] = LAYOUT_75_ansi( _______, RGB_MOD, RGB_HUI, RGB_HUD, RGB_SAI, RGB_SAD, RGB_VAI, RGB_VAD, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, - _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, - _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______ ), #endif - [2] = LAYOUT_75_via( + [2] = LAYOUT_75_ansi( _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, - _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, - _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______ ), - [3] = LAYOUT_75_via( + [3] = LAYOUT_75_ansi( _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, - _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, - _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______ ) }; diff --git a/keyboards/tkc/tkc1800/config.h b/keyboards/tkc/tkc1800/config.h index dd6631f545..03c8bceba0 100644 --- a/keyboards/tkc/tkc1800/config.h +++ b/keyboards/tkc/tkc1800/config.h @@ -29,10 +29,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #define RGBLIGHT_EFFECT_RGB_TEST #define RGBLIGHT_EFFECT_ALTERNATING #define RGBLIGHT_EFFECT_TWINKLE -#define RGBLED_NUM 30 // Number of LEDs -#define RGBLIGHT_HUE_STEP 5 -#define RGBLIGHT_SAT_STEP 10 -#define RGBLIGHT_VAL_STEP 10 /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ #define LOCKING_SUPPORT_ENABLE diff --git a/keyboards/tkc/tkc1800/info.json b/keyboards/tkc/tkc1800/info.json index 5cf8f83c80..50f471c08f 100644 --- a/keyboards/tkc/tkc1800/info.json +++ b/keyboards/tkc/tkc1800/info.json @@ -27,6 +27,12 @@ "num_lock": "D2", "scroll_lock": "D4" }, + "rgblight": { + "hue_steps": 5, + "saturation_steps": 10, + "brightness_steps": 10, + "led_count": 30 + }, "ws2812": { "pin": "D7" }, diff --git a/keyboards/tkc/tkl_ab87/config.h b/keyboards/tkc/tkl_ab87/config.h index 95ce321679..0cfc6216fc 100644 --- a/keyboards/tkc/tkl_ab87/config.h +++ b/keyboards/tkc/tkl_ab87/config.h @@ -20,11 +20,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #define DYNAMIC_KEYMAP_LAYER_COUNT 2 //Reduced layer count due to memory space considerations - #define RGBLED_NUM 22 - #define RGBLIGHT_HUE_STEP 8 - #define RGBLIGHT_SAT_STEP 8 - #define RGBLIGHT_VAL_STEP 8 - #define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */ #define RGBLIGHT_EFFECT_BREATHING #define RGBLIGHT_EFFECT_RAINBOW_MOOD #define RGBLIGHT_EFFECT_RAINBOW_SWIRL diff --git a/keyboards/tkc/tkl_ab87/info.json b/keyboards/tkc/tkl_ab87/info.json index c0a178595b..bd1ec85f19 100644 --- a/keyboards/tkc/tkl_ab87/info.json +++ b/keyboards/tkc/tkl_ab87/info.json @@ -25,7 +25,11 @@ "pin": "E2" }, "rgblight": { - "max_brightness": 200 + "saturation_steps": 8, + "brightness_steps": 8, + "led_count": 22, + "max_brightness": 200, + "sleep": true }, "processor": "atmega32u4", "bootloader": "atmel-dfu", diff --git a/keyboards/tkw/grandiceps/config.h b/keyboards/tkw/grandiceps/config.h index 4837c2fda6..0e72e43a57 100644 --- a/keyboards/tkw/grandiceps/config.h +++ b/keyboards/tkw/grandiceps/config.h @@ -17,11 +17,6 @@ #define SELECT_SOFT_SERIAL_SPEED 1 -#define MATRIX_IO_DELAY 5 -#define TAP_CODE_DELAY 10 - -#define RGBLED_NUM 16 -#define RGBLED_SPLIT { 8,8 } #define RGBLIGHT_EFFECT_BREATHING #define RGBLIGHT_EFFECT_RAINBOW_MOOD #define RGBLIGHT_EFFECT_RAINBOW_SWIRL diff --git a/keyboards/tkw/grandiceps/info.json b/keyboards/tkw/grandiceps/info.json index 1b16db1bf8..c6f72f7823 100644 --- a/keyboards/tkw/grandiceps/info.json +++ b/keyboards/tkw/grandiceps/info.json @@ -11,11 +11,14 @@ "driver": "pwm" }, "rgblight": { - "max_brightness": 120 + "led_count": 16, + "max_brightness": 120, + "split_count": [8, 8] }, "matrix_pins": { "cols": ["B0", "A7", "A3", "A5", "A4", "A2"], - "rows": ["B12", "A6", "B13", "B9", "B8"] + "rows": ["B12", "A6", "B13", "B9", "B8"], + "io_delay": 5 }, "diode_direction": "COL2ROW", "encoder": { @@ -32,6 +35,9 @@ } } }, + "qmk": { + "tap_keycode_delay": 10 + }, "processor": "STM32F411", "bootloader": "stm32-dfu", "board": "BLACKPILL_STM32_F411", diff --git a/keyboards/tkw/stoutgat/v1/config.h b/keyboards/tkw/stoutgat/v1/config.h deleted file mode 100644 index b168318aa0..0000000000 --- a/keyboards/tkw/stoutgat/v1/config.h +++ /dev/null @@ -1,20 +0,0 @@ -/*Copyright 2020 Thys de Wet - -This program is free software: you can redistribute it and/or modify -it under the terms of the GNU General Public License as published by -the Free Software Foundation, either version 2 of the License, or -(at your option) any later version. - -This program is distributed in the hope that it will be useful, -but WITHOUT ANY WARRANTY; without even the implied warranty of -MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -GNU General Public License for more details. - -You should have received a copy of the GNU General Public License -along with this program. If not, see <http://www.gnu.org/licenses/>. -*/ - -#pragma once - - -#define TAP_CODE_DELAY 10 diff --git a/keyboards/tkw/stoutgat/v1/info.json b/keyboards/tkw/stoutgat/v1/info.json index 334ace4d3a..9d7a60a4b9 100644 --- a/keyboards/tkw/stoutgat/v1/info.json +++ b/keyboards/tkw/stoutgat/v1/info.json @@ -19,6 +19,9 @@ {"pin_a": "B0", "pin_b": "B1"} ] }, + "qmk": { + "tap_keycode_delay": 10 + }, "processor": "atmega32a", "bootloader": "usbasploader", "community_layouts": ["65_iso", "65_ansi"], diff --git a/keyboards/tkw/stoutgat/v2/config.h b/keyboards/tkw/stoutgat/v2/config.h index 3e5d5a452a..5327f1644b 100644 --- a/keyboards/tkw/stoutgat/v2/config.h +++ b/keyboards/tkw/stoutgat/v2/config.h @@ -15,10 +15,6 @@ */ #pragma once -#define MATRIX_IO_DELAY 5 -#define TAP_CODE_DELAY 10 - -#define RGBLED_NUM 13 #define RGBLIGHT_EFFECT_BREATHING #define RGBLIGHT_EFFECT_RAINBOW_MOOD #define RGBLIGHT_EFFECT_RAINBOW_SWIRL diff --git a/keyboards/tkw/stoutgat/v2/info.json b/keyboards/tkw/stoutgat/v2/info.json index e0cc720365..659d125d86 100644 --- a/keyboards/tkw/stoutgat/v2/info.json +++ b/keyboards/tkw/stoutgat/v2/info.json @@ -13,11 +13,13 @@ "driver": "pwm" }, "rgblight": { + "led_count": 13, "max_brightness": 120 }, "matrix_pins": { "cols": ["B0", "A7", "A6", "A5", "A4", "A3", "A1", "A0", "C15", "C14", "C13", "A15", "B3", "B4", "B5"], - "rows": ["B6", "A2", "B7", "B9", "B8"] + "rows": ["B6", "A2", "B7", "B9", "B8"], + "io_delay": 5 }, "diode_direction": "COL2ROW", "encoder": { @@ -26,6 +28,9 @@ {"pin_a": "B12", "pin_b": "B13"} ] }, + "qmk": { + "tap_keycode_delay": 10 + }, "community_layouts": ["65_iso", "65_ansi"], "layouts": { "LAYOUT_65_ansi": { diff --git a/keyboards/tmo50/config.h b/keyboards/tmo50/config.h index 29151c2a22..23e4e1ff44 100644 --- a/keyboards/tmo50/config.h +++ b/keyboards/tmo50/config.h @@ -17,11 +17,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #pragma once - #define RGBLED_NUM 10 - #define RGBLIGHT_HUE_STEP 8 - #define RGBLIGHT_SAT_STEP 8 - #define RGBLIGHT_VAL_STEP 8 - #define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */ #define RGBLIGHT_EFFECT_BREATHING #define RGBLIGHT_EFFECT_RAINBOW_MOOD #define RGBLIGHT_EFFECT_RAINBOW_SWIRL diff --git a/keyboards/tmo50/info.json b/keyboards/tmo50/info.json index f4cb7b1aa8..6db3743d26 100644 --- a/keyboards/tmo50/info.json +++ b/keyboards/tmo50/info.json @@ -17,6 +17,12 @@ "pin": "B7", "breathing": true }, + "rgblight": { + "saturation_steps": 8, + "brightness_steps": 8, + "led_count": 10, + "sleep": true + }, "ws2812": { "pin": "C7" }, diff --git a/keyboards/toffee_studio/blueberry/config.h b/keyboards/toffee_studio/blueberry/config.h index 07a4bae2be..4708cd179b 100644 --- a/keyboards/toffee_studio/blueberry/config.h +++ b/keyboards/toffee_studio/blueberry/config.h @@ -16,16 +16,6 @@ #pragma once -# define RGBLED_NUM 22 - -/* RGB LED logical order map */ -/* Top->Bottom, Right->Left */ -#define RGBLIGHT_LED_MAP { \ - 19, 18, 17, 16, 15, 14, 13, 12, 11, \ - 20, 10, \ - 21, 9, \ - 0, 1, 2, 3, 4, 5, 6, 7, 8 } - # define RGBLIGHT_EFFECT_BREATHING # define RGBLIGHT_EFFECT_RAINBOW_MOOD # define RGBLIGHT_EFFECT_RAINBOW_SWIRL diff --git a/keyboards/toffee_studio/blueberry/info.json b/keyboards/toffee_studio/blueberry/info.json index 6acd8f4a58..f14afaaced 100644 --- a/keyboards/toffee_studio/blueberry/info.json +++ b/keyboards/toffee_studio/blueberry/info.json @@ -12,7 +12,9 @@ "pin": "D0" }, "rgblight": { - "max_brightness": 192 + "led_count": 22, + "max_brightness": 192, + "led_map": [19, 18, 17, 16, 15, 14, 13, 12, 11, 20, 10, 21, 9, 0, 1, 2, 3, 4, 5, 6, 7, 8] }, "matrix_pins": { "cols": ["B6", "D4", "D6", "D7", "B4", "B5", "C6", "C7"], diff --git a/keyboards/tokyokeyboard/alix40/config.h b/keyboards/tokyokeyboard/alix40/config.h index fad2d49c93..f2bc075790 100644 --- a/keyboards/tokyokeyboard/alix40/config.h +++ b/keyboards/tokyokeyboard/alix40/config.h @@ -30,10 +30,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #define RGBLIGHT_EFFECT_RGB_TEST #define RGBLIGHT_EFFECT_ALTERNATING #define RGBLIGHT_EFFECT_TWINKLE -#define RGBLED_NUM 12 -#define RGBLIGHT_HUE_STEP 10 -#define RGBLIGHT_SAT_STEP 10 -#define RGBLIGHT_VAL_STEP 10 /* Bluetooth */ #define BATTERY_LEVEL_PIN B6 diff --git a/keyboards/tokyokeyboard/alix40/info.json b/keyboards/tokyokeyboard/alix40/info.json index d71fb56f0b..1c2c6fcd6a 100644 --- a/keyboards/tokyokeyboard/alix40/info.json +++ b/keyboards/tokyokeyboard/alix40/info.json @@ -18,6 +18,12 @@ "levels": 31, "breathing": true }, + "rgblight": { + "hue_steps": 10, + "saturation_steps": 10, + "brightness_steps": 10, + "led_count": 12 + }, "ws2812": { "pin": "B0" }, diff --git a/keyboards/tokyokeyboard/tokyo60/config.h b/keyboards/tokyokeyboard/tokyo60/config.h index dd58e34f08..d702489ee7 100644 --- a/keyboards/tokyokeyboard/tokyo60/config.h +++ b/keyboards/tokyokeyboard/tokyo60/config.h @@ -16,7 +16,3 @@ #define RGBLIGHT_EFFECT_RGB_TEST #define RGBLIGHT_EFFECT_ALTERNATING #define RGBLIGHT_EFFECT_TWINKLE -#define RGBLED_NUM 10 -#define RGBLIGHT_HUE_STEP 12 -#define RGBLIGHT_SAT_STEP 12 -#define RGBLIGHT_VAL_STEP 12 diff --git a/keyboards/tokyokeyboard/tokyo60/info.json b/keyboards/tokyokeyboard/tokyo60/info.json index aae81a4a6b..b0278c2541 100644 --- a/keyboards/tokyokeyboard/tokyo60/info.json +++ b/keyboards/tokyokeyboard/tokyo60/info.json @@ -18,6 +18,12 @@ "pin": "B7", "levels": 6 }, + "rgblight": { + "hue_steps": 12, + "saturation_steps": 12, + "brightness_steps": 12, + "led_count": 10 + }, "ws2812": { "pin": "F7" }, diff --git a/keyboards/tominabox1/bigboy/config.h b/keyboards/tominabox1/bigboy/config.h index 77d49adbec..da07ff7251 100755 --- a/keyboards/tominabox1/bigboy/config.h +++ b/keyboards/tominabox1/bigboy/config.h @@ -16,12 +16,6 @@ #pragma once - #define RGBLED_NUM 5 - - #define RGBLIGHT_HUE_STEP 8 - #define RGBLIGHT_SAT_STEP 8 - #define RGBLIGHT_VAL_STEP 8 - #define RGBLIGHT_EFFECT_RAINBOW_MOOD #define RGBLIGHT_EFFECT_RAINBOW_SWIRL #define RGBLIGHT_EFFECT_SNAKE diff --git a/keyboards/tominabox1/bigboy/info.json b/keyboards/tominabox1/bigboy/info.json index 87f8473bb8..10b93b7a15 100644 --- a/keyboards/tominabox1/bigboy/info.json +++ b/keyboards/tominabox1/bigboy/info.json @@ -8,6 +8,11 @@ "pid": "0x6262", "device_version": "0.0.1" }, + "rgblight": { + "saturation_steps": 8, + "brightness_steps": 8, + "led_count": 5 + }, "ws2812": { "pin": "B5" }, diff --git a/keyboards/tominabox1/le_chiffre/config.h b/keyboards/tominabox1/le_chiffre/config.h index fb3860b0eb..c4ae5fc38b 100644 --- a/keyboards/tominabox1/le_chiffre/config.h +++ b/keyboards/tominabox1/le_chiffre/config.h @@ -24,9 +24,7 @@ * WS2812 Underglow Matrix options */ -#define RGBLED_NUM 11 - -#define RGB_MATRIX_LED_COUNT RGBLED_NUM +#define RGB_MATRIX_LED_COUNT 11 #define RGBLIGHT_EFFECT_BREATHING #define RGBLIGHT_EFFECT_RAINBOW_MOOD @@ -44,8 +42,4 @@ #define RGB_DISABLE_WHEN_USB_SUSPENDED // turn off effects when suspended #define RGB_MATRIX_FRAMEBUFFER_EFFECTS #define RGB_MATRIX_MAXIMUM_BRIGHTNESS 150 // limits maximum brightness of LEDs to 150 out of 255. Higher may cause the controller to crash. -#define RGB_MATRIX_HUE_STEP 8 -#define RGB_MATRIX_SAT_STEP 8 -#define RGB_MATRIX_VAL_STEP 8 -#define RGB_MATRIX_SPD_STEP 10 #endif diff --git a/keyboards/tominabox1/le_chiffre/he/info.json b/keyboards/tominabox1/le_chiffre/he/info.json index bab0d5242c..b4c02bf0e1 100644 --- a/keyboards/tominabox1/le_chiffre/he/info.json +++ b/keyboards/tominabox1/le_chiffre/he/info.json @@ -2,6 +2,9 @@ "usb": { "device_version": "0.0.3" }, + "rgblight": { + "led_count": 11 + }, "ws2812": { "pin": "F0" }, @@ -16,7 +19,10 @@ ] }, "rgb_matrix": { - "driver": "WS2812" + "driver": "WS2812", + "sat_steps": 8, + "val_steps": 8, + "speed_steps": 10 }, "processor": "atmega32u4", "bootloader": "atmel-dfu", diff --git a/keyboards/tominabox1/le_chiffre/rev1/info.json b/keyboards/tominabox1/le_chiffre/rev1/info.json index 5222f4ea51..73b6f435a7 100644 --- a/keyboards/tominabox1/le_chiffre/rev1/info.json +++ b/keyboards/tominabox1/le_chiffre/rev1/info.json @@ -2,6 +2,9 @@ "usb": { "device_version": "0.0.1" }, + "rgblight": { + "led_count": 11 + }, "ws2812": { "pin": "F0" }, @@ -16,7 +19,10 @@ ] }, "rgb_matrix": { - "driver": "WS2812" + "driver": "WS2812", + "sat_steps": 8, + "val_steps": 8, + "speed_steps": 10 }, "processor": "atmega32u4", "bootloader": "atmel-dfu", diff --git a/keyboards/tominabox1/le_chiffre/rev2/info.json b/keyboards/tominabox1/le_chiffre/rev2/info.json index f6773fb9bd..44dcfdf728 100644 --- a/keyboards/tominabox1/le_chiffre/rev2/info.json +++ b/keyboards/tominabox1/le_chiffre/rev2/info.json @@ -2,6 +2,9 @@ "usb": { "device_version": "0.0.2" }, + "rgblight": { + "led_count": 11 + }, "ws2812": { "pin": "B1" }, @@ -16,7 +19,10 @@ ] }, "rgb_matrix": { - "driver": "WS2812" + "driver": "WS2812", + "sat_steps": 8, + "val_steps": 8, + "speed_steps": 10 }, "processor": "atmega32u4", "bootloader": "atmel-dfu", diff --git a/keyboards/tominabox1/qaz/config.h b/keyboards/tominabox1/qaz/config.h index a9b9df6815..85cbd30a42 100644 --- a/keyboards/tominabox1/qaz/config.h +++ b/keyboards/tominabox1/qaz/config.h @@ -15,7 +15,3 @@ #define RGBLIGHT_EFFECT_RGB_TEST #define RGBLIGHT_EFFECT_ALTERNATING #define RGBLIGHT_EFFECT_TWINKLE -#define RGBLED_NUM 21 -#define RGBLIGHT_HUE_STEP 8 -#define RGBLIGHT_SAT_STEP 8 -#define RGBLIGHT_VAL_STEP 8 diff --git a/keyboards/tominabox1/qaz/info.json b/keyboards/tominabox1/qaz/info.json index 99ae387af7..73c5195cc7 100644 --- a/keyboards/tominabox1/qaz/info.json +++ b/keyboards/tominabox1/qaz/info.json @@ -8,6 +8,11 @@ "pid": "0x0001", "device_version": "0.0.1" }, + "rgblight": { + "saturation_steps": 8, + "brightness_steps": 8, + "led_count": 21 + }, "ws2812": { "pin": "F7" }, diff --git a/keyboards/tominabox1/underscore33/rev2/config.h b/keyboards/tominabox1/underscore33/rev2/config.h index eac1807676..1ea0b6598d 100644 --- a/keyboards/tominabox1/underscore33/rev2/config.h +++ b/keyboards/tominabox1/underscore33/rev2/config.h @@ -21,7 +21,6 @@ #define LOCKING_RESYNC_ENABLE #ifdef RGBLIGHT_ENABLE - #define RGBLED_NUM 12 #define RGBLIGHT_EFFECT_BREATHING #define RGBLIGHT_EFFECT_RAINBOW_MOOD #define RGBLIGHT_EFFECT_RAINBOW_SWIRL diff --git a/keyboards/tominabox1/underscore33/rev2/info.json b/keyboards/tominabox1/underscore33/rev2/info.json index 2b93047d41..5553a11d9a 100644 --- a/keyboards/tominabox1/underscore33/rev2/info.json +++ b/keyboards/tominabox1/underscore33/rev2/info.json @@ -8,6 +8,9 @@ "pid": "0x3302", "device_version": "0.0.2" }, + "rgblight": { + "led_count": 12 + }, "ws2812": { "pin": "D6" }, diff --git a/keyboards/tr60w/config.h b/keyboards/tr60w/config.h index a6dfefb6b9..d702489ee7 100644 --- a/keyboards/tr60w/config.h +++ b/keyboards/tr60w/config.h @@ -16,7 +16,3 @@ #define RGBLIGHT_EFFECT_RGB_TEST #define RGBLIGHT_EFFECT_ALTERNATING #define RGBLIGHT_EFFECT_TWINKLE -#define RGBLED_NUM 4 -#define RGBLIGHT_HUE_STEP 8 -#define RGBLIGHT_SAT_STEP 8 -#define RGBLIGHT_VAL_STEP 8 diff --git a/keyboards/tr60w/info.json b/keyboards/tr60w/info.json index 62e5fae73b..6dbaeb8c49 100644 --- a/keyboards/tr60w/info.json +++ b/keyboards/tr60w/info.json @@ -16,6 +16,11 @@ "backlight": { "pin": "B7" }, + "rgblight": { + "saturation_steps": 8, + "brightness_steps": 8, + "led_count": 4 + }, "ws2812": { "pin": "F7" }, diff --git a/keyboards/trashman/ketch/config.h b/keyboards/trashman/ketch/config.h index 0f391f70ba..ff4749b290 100644 --- a/keyboards/trashman/ketch/config.h +++ b/keyboards/trashman/ketch/config.h @@ -22,7 +22,6 @@ SOFTWARE. #pragma once -#define RGBLED_NUM 10 #define RGBLIGHT_EFFECT_BREATHING #define RGBLIGHT_EFFECT_RAINBOW_MOOD #define RGBLIGHT_EFFECT_RAINBOW_SWIRL @@ -33,5 +32,4 @@ SOFTWARE. #define RGBLIGHT_EFFECT_RGB_TEST #define RGBLIGHT_EFFECT_ALTERNATING #define RGBLIGHT_EFFECT_TWINKLE -#define RGBLIGHT_SLEEP #define NO_USB_STARTUP_CHECK diff --git a/keyboards/trashman/ketch/info.json b/keyboards/trashman/ketch/info.json index 21f3bb7ec3..75bfb0b073 100644 --- a/keyboards/trashman/ketch/info.json +++ b/keyboards/trashman/ketch/info.json @@ -9,6 +9,10 @@ "device_version": "0.0.1", "max_power": 100 }, + "rgblight": { + "led_count": 10, + "sleep": true + }, "ws2812": { "pin": "F4" }, diff --git a/keyboards/tszaboo/ortho4exent/config.h b/keyboards/tszaboo/ortho4exent/config.h index d04509a30d..30b34af59d 100644 --- a/keyboards/tszaboo/ortho4exent/config.h +++ b/keyboards/tszaboo/ortho4exent/config.h @@ -17,12 +17,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #pragma once - #define RGBLED_NUM 18 - - #define RGBLIGHT_HUE_STEP 8 - #define RGBLIGHT_SAT_STEP 8 - #define RGBLIGHT_VAL_STEP 8 - #define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */ #define RGBLIGHT_EFFECT_BREATHING #define RGBLIGHT_EFFECT_RAINBOW_MOOD #define RGBLIGHT_EFFECT_RAINBOW_SWIRL diff --git a/keyboards/tszaboo/ortho4exent/info.json b/keyboards/tszaboo/ortho4exent/info.json index 21c69b1eb0..85b835b20c 100644 --- a/keyboards/tszaboo/ortho4exent/info.json +++ b/keyboards/tszaboo/ortho4exent/info.json @@ -8,6 +8,12 @@ "pid": "0x7934", "device_version": "0.0.1" }, + "rgblight": { + "saturation_steps": 8, + "brightness_steps": 8, + "led_count": 18, + "sleep": true + }, "ws2812": { "pin": "B6" }, diff --git a/keyboards/tunks/ergo33/config.h b/keyboards/tunks/ergo33/config.h index 5ab6f8a347..edfd0825c6 100644 --- a/keyboards/tunks/ergo33/config.h +++ b/keyboards/tunks/ergo33/config.h @@ -28,14 +28,6 @@ #define RGBLIGHT_EFFECT_ALTERNATING #define RGBLIGHT_EFFECT_TWINKLE -#if !defined(RGBLED_NUM) -/* RGB LED count - * No external LED PCB: 10 - * External LED PCB: 14 - */ -# define RGBLED_NUM 14 -#endif - /* * Feature disable options * These options are also useful to firmware size reduction. diff --git a/keyboards/tunks/ergo33/info.json b/keyboards/tunks/ergo33/info.json index afca170abd..e5b1e6f519 100644 --- a/keyboards/tunks/ergo33/info.json +++ b/keyboards/tunks/ergo33/info.json @@ -7,6 +7,9 @@ "pid": "0xA0A1", "device_version": "0.0.1" }, + "rgblight": { + "led_count": 14 + }, "ws2812": { "pin": "D4" }, diff --git a/keyboards/tw40/config.h b/keyboards/tw40/config.h index 7c93823314..c335ed5cca 100644 --- a/keyboards/tw40/config.h +++ b/keyboards/tw40/config.h @@ -17,7 +17,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #pragma once -#define RGBLED_NUM 15 #define RGBLIGHT_EFFECT_BREATHING #define RGBLIGHT_EFFECT_RAINBOW_MOOD #define RGBLIGHT_EFFECT_RAINBOW_SWIRL diff --git a/keyboards/tw40/info.json b/keyboards/tw40/info.json index d57206cbc5..b09acc66d1 100644 --- a/keyboards/tw40/info.json +++ b/keyboards/tw40/info.json @@ -8,6 +8,9 @@ "pid": "0x5457", "device_version": "0.0.1" }, + "rgblight": { + "led_count": 15 + }, "ws2812": { "pin": "E6" }, diff --git a/keyboards/tzarc/djinn/rev1/config.h b/keyboards/tzarc/djinn/rev1/config.h index 5ced700323..5dffc00141 100644 --- a/keyboards/tzarc/djinn/rev1/config.h +++ b/keyboards/tzarc/djinn/rev1/config.h @@ -14,7 +14,6 @@ #endif // SERIAL_USART_SPEED // RGB configuration -#define RGBLED_NUM 84 #define RGB_MATRIX_LED_COUNT 84 #define RGB_MATRIX_SPLIT \ { 42, 42 } diff --git a/keyboards/tzarc/djinn/rev2/config.h b/keyboards/tzarc/djinn/rev2/config.h index 02224e4fc6..12a6372405 100644 --- a/keyboards/tzarc/djinn/rev2/config.h +++ b/keyboards/tzarc/djinn/rev2/config.h @@ -17,7 +17,6 @@ #define SERIAL_USART_FULL_DUPLEX // RGB configuration -#define RGBLED_NUM 86 #define RGB_MATRIX_LED_COUNT 86 #define RGB_MATRIX_SPLIT \ { 43, 43 } diff --git a/keyboards/tzarc/ghoul/config.h b/keyboards/tzarc/ghoul/config.h index c027b77565..932ea8eb50 100644 --- a/keyboards/tzarc/ghoul/config.h +++ b/keyboards/tzarc/ghoul/config.h @@ -13,4 +13,3 @@ // RGB configuration #define RGB_MATRIX_LED_COUNT 40 -#define RGBLED_NUM 40 diff --git a/keyboards/tzarc/ghoul/rules.mk b/keyboards/tzarc/ghoul/rules.mk index 10630d80cf..9590c52217 100644 --- a/keyboards/tzarc/ghoul/rules.mk +++ b/keyboards/tzarc/ghoul/rules.mk @@ -1,7 +1,6 @@ CUSTOM_MATRIX = lite EEPROM_DRIVER = spi QUANTUM_PAINTER_DRIVERS = ssd1351_spi -OPT_DEFS += -DCORTEX_ENABLE_WFI_IDLE=TRUE DEFAULT_FOLDER = tzarc/ghoul/rev1/stm32 diff --git a/keyboards/ubest/vn/config.h b/keyboards/ubest/vn/config.h deleted file mode 100644 index fd3c59f509..0000000000 --- a/keyboards/ubest/vn/config.h +++ /dev/null @@ -1,32 +0,0 @@ -/* Copyright 2022 water <mfkiiyd@163.com> - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see <http://www.gnu.org/licenses/>. - */ - -#pragma once - - #define RGBLED_NUM 8 - #define RGBLIGHT_HUE_STEP 8 - #define RGBLIGHT_SAT_STEP 8 - #define RGBLIGHT_VAL_STEP 8 - #define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */ -// #define RGBLIGHT_EFFECT_BREATHING -// #define RGBLIGHT_EFFECT_RAINBOW_MOOD -// #define RGBLIGHT_EFFECT_RAINBOW_SWIRL -// #define RGBLIGHT_EFFECT_SNAKE -// #define RGBLIGHT_EFFECT_KNIGHT -// #define RGBLIGHT_EFFECT_CHRISTMAS -// #define RGBLIGHT_EFFECT_STATIC_GRADIENT -// #define RGBLIGHT_EFFECT_RGB_TEST -// #define RGBLIGHT_EFFECT_ALTERNATING diff --git a/keyboards/ubest/vn/info.json b/keyboards/ubest/vn/info.json index 4180f6f5ec..87afc573d5 100644 --- a/keyboards/ubest/vn/info.json +++ b/keyboards/ubest/vn/info.json @@ -20,7 +20,11 @@ "pin": "E2" }, "rgblight": { - "max_brightness": 240 + "saturation_steps": 8, + "brightness_steps": 8, + "led_count": 8, + "max_brightness": 240, + "sleep": true }, "indicators": { "caps_lock": "B3", diff --git a/keyboards/uk78/config.h b/keyboards/uk78/config.h index ab971a55ad..356b578ee0 100644 --- a/keyboards/uk78/config.h +++ b/keyboards/uk78/config.h @@ -34,7 +34,3 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #define RGBLIGHT_EFFECT_RGB_TEST #define RGBLIGHT_EFFECT_ALTERNATING #define RGBLIGHT_EFFECT_TWINKLE -#define RGBLED_NUM 20 -#define RGBLIGHT_HUE_STEP 8 -#define RGBLIGHT_SAT_STEP 8 -#define RGBLIGHT_VAL_STEP 8 diff --git a/keyboards/uk78/info.json b/keyboards/uk78/info.json index f166936a9a..87d58e1b83 100644 --- a/keyboards/uk78/info.json +++ b/keyboards/uk78/info.json @@ -16,6 +16,11 @@ "backlight": { "pin": "B6" }, + "rgblight": { + "saturation_steps": 8, + "brightness_steps": 8, + "led_count": 20 + }, "ws2812": { "pin": "F6" }, diff --git a/keyboards/uk78/keymaps/default/keymap.c b/keyboards/uk78/keymaps/default/keymap.c index 2fa09f7d6d..e4bdf90508 100644 --- a/keyboards/uk78/keymaps/default/keymap.c +++ b/keyboards/uk78/keymaps/default/keymap.c @@ -75,12 +75,13 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { }; -void led_set_user(uint8_t usb_led) { - if (usb_led & (1 << USB_LED_CAPS_LOCK)) { +bool led_update_user(led_t led_state) { + if (led_state.caps_lock) { setPinOutput(A3); writePinHigh(A3); } else { setPinInput(A3); writePinLow(A3); } + return false; } diff --git a/keyboards/uk78/keymaps/rask/keymap.c b/keyboards/uk78/keymaps/rask/keymap.c index 97b1853aae..01220a775e 100644 --- a/keyboards/uk78/keymaps/rask/keymap.c +++ b/keyboards/uk78/keymaps/rask/keymap.c @@ -74,47 +74,11 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { }; - -void matrix_init_user(void) { -} - -void matrix_scan_user(void) { -} - -bool process_record_user(uint16_t keycode, keyrecord_t *record) { - return true; -} - -void led_set_user(uint8_t usb_led) { - - if (usb_led & (1 << USB_LED_NUM_LOCK)) { - - } else { - - } - - if (usb_led & (1 << USB_LED_CAPS_LOCK)) { +bool led_update_user(led_t led_state) { + if (led_state.caps_lock) { DDRA |= (1 << 3); PORTA |= (1 << 3); } else { DDRA &= ~(1 << 3); PORTA &= ~(1 << 3); } - - if (usb_led & (1 << USB_LED_SCROLL_LOCK)) { - - } else { - - } - - if (usb_led & (1 << USB_LED_COMPOSE)) { - - } else { - - } - - if (usb_led & (1 << USB_LED_KANA)) { - - } else { - - } - + return false; } diff --git a/keyboards/ungodly/launch_pad/config.h b/keyboards/ungodly/launch_pad/config.h index 9c6459abbd..f3431bd412 100644 --- a/keyboards/ungodly/launch_pad/config.h +++ b/keyboards/ungodly/launch_pad/config.h @@ -21,8 +21,7 @@ /* RGB Matrix configuration */ #ifdef RGB_MATRIX_ENABLE -# define RGBLED_NUM 22 -# define RGB_MATRIX_LED_COUNT RGBLED_NUM +# define RGB_MATRIX_LED_COUNT 22 # define RGB_MATRIX_KEYPRESSES // reacts to keypresses // # define RGB_MATRIX_KEYRELEASES // reacts to keyreleases (instead of keypresses) # define RGB_DISABLE_WHEN_USB_SUSPENDED // turn off effects when suspended @@ -30,10 +29,6 @@ // # define RGB_MATRIX_LED_PROCESS_LIMIT (RGB_MATRIX_LED_COUNT + 4) / 5 // limits the number of LEDs to process in an animation per task run (increases keyboard responsiveness) // # define RGB_MATRIX_LED_FLUSH_LIMIT 16 // limits in milliseconds how frequently an animation will update the LEDs. 16 (16ms) is equivalent to limiting to 60fps (increases keyboard responsiveness) # define RGB_MATRIX_MAXIMUM_BRIGHTNESS 50 // limits maximum brightness of LEDs to 150 out of 255. Higher may cause the controller to crash. -# define RGB_MATRIX_HUE_STEP 8 -# define RGB_MATRIX_SAT_STEP 8 -# define RGB_MATRIX_VAL_STEP 8 -# define RGB_MATRIX_SPD_STEP 10 # define RGB_MATRIX_DEFAULT_MODE RGB_MATRIX_CYCLE_PINWHEEL // default mode // RGB Matrix Animation modes. Explicitly enabled diff --git a/keyboards/ungodly/launch_pad/info.json b/keyboards/ungodly/launch_pad/info.json index 97f3d10407..c94b2eb1c9 100644 --- a/keyboards/ungodly/launch_pad/info.json +++ b/keyboards/ungodly/launch_pad/info.json @@ -9,7 +9,10 @@ "device_version": "99.9.9" }, "rgb_matrix": { - "driver": "WS2812" + "driver": "WS2812", + "sat_steps": 8, + "val_steps": 8, + "speed_steps": 10 }, "matrix_pins": { "cols": ["B0", "B1", "B2", "B3"], diff --git a/keyboards/unikorn/config.h b/keyboards/unikorn/config.h index 4c3789155e..d0153fcff0 100644 --- a/keyboards/unikorn/config.h +++ b/keyboards/unikorn/config.h @@ -18,7 +18,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #pragma once #ifdef RGBLIGHT_ENABLE -#define RGBLED_NUM 17 #define RGBLIGHT_EFFECT_BREATHING #define RGBLIGHT_EFFECT_RAINBOW_MOOD #define RGBLIGHT_EFFECT_RAINBOW_SWIRL diff --git a/keyboards/unikorn/info.json b/keyboards/unikorn/info.json index 02202bef07..5bd23e612e 100644 --- a/keyboards/unikorn/info.json +++ b/keyboards/unikorn/info.json @@ -16,6 +16,9 @@ "backlight": { "pin": "D4" }, + "rgblight": { + "led_count": 17 + }, "ws2812": { "driver": "i2c" }, diff --git a/keyboards/unison/v04/config.h b/keyboards/unison/v04/config.h index d80dc827f6..93e7e6a90c 100644 --- a/keyboards/unison/v04/config.h +++ b/keyboards/unison/v04/config.h @@ -26,12 +26,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #endif /* RGB Lighting */ - #define RGBLED_NUM 7 // Layer Indicator(2) + Rotary Encoder(5) - #define RGBLIGHT_LED_MAP {1, 2, 0, 3, 4, 5, 6} // align LEDs from Left to Right - #define RGBLIGHT_HUE_STEP 4 - #define RGBLIGHT_SAT_STEP 8 - #define RGBLIGHT_VAL_STEP 8 - // #define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */ /*== Lighting Layers ==*/ #define RGBLIGHT_LAYERS // #define RGBLIGHT_MAX_LAYERS 2 diff --git a/keyboards/unison/v04/info.json b/keyboards/unison/v04/info.json index 481c07f7a9..291c10f37b 100644 --- a/keyboards/unison/v04/info.json +++ b/keyboards/unison/v04/info.json @@ -12,6 +12,13 @@ "cols": ["B3", "E6", "F1", "F5", "F7", "B2", "F0", "F4", "F6", "C7"], "rows": ["B3", "E6", "F1", "F5", "F7", "B2", "F0", "F4", "F6", "C7"] }, + "rgblight": { + "hue_steps": 4, + "saturation_steps": 8, + "brightness_steps": 8, + "led_count": 7, + "led_map": [1, 2, 0, 3, 4, 5, 6] + }, "ws2812": { "pin": "B7" }, diff --git a/keyboards/utd80/config.h b/keyboards/utd80/config.h index 5d33e9e99c..48ae5adb5b 100644 --- a/keyboards/utd80/config.h +++ b/keyboards/utd80/config.h @@ -31,7 +31,3 @@ #define RGBLIGHT_EFFECT_RGB_TEST #define RGBLIGHT_EFFECT_ALTERNATING #define RGBLIGHT_EFFECT_TWINKLE -#define RGBLED_NUM 4 -#define RGBLIGHT_HUE_STEP 8 -#define RGBLIGHT_SAT_STEP 8 -#define RGBLIGHT_VAL_STEP 8 diff --git a/keyboards/utd80/info.json b/keyboards/utd80/info.json index 5a7bde1da1..6e962fb869 100644 --- a/keyboards/utd80/info.json +++ b/keyboards/utd80/info.json @@ -21,6 +21,11 @@ "caps_lock": "B6", "scroll_lock": "B5" }, + "rgblight": { + "saturation_steps": 8, + "brightness_steps": 8, + "led_count": 4 + }, "ws2812": { "pin": "E2" }, diff --git a/keyboards/uzu42/rev1/config.h b/keyboards/uzu42/rev1/config.h index d0bba6d598..24bf7e6df4 100644 --- a/keyboards/uzu42/rev1/config.h +++ b/keyboards/uzu42/rev1/config.h @@ -18,9 +18,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #pragma once -#define RGBLED_NUM 54 // Number of LEDs -#define RGBLED_SPLIT { 27, 27 } - #define RGBLIGHT_EFFECT_BREATHING #define RGBLIGHT_EFFECT_RAINBOW_MOOD #define RGBLIGHT_EFFECT_RAINBOW_SWIRL @@ -32,10 +29,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. // #define RGBLIGHT_EFFECT_ALTERNATING #define RGBLIGHT_EFFECT_TWINKLE -#define RGBLIGHT_HUE_STEP 10 -#define RGBLIGHT_SAT_STEP 17 -#define RGBLIGHT_VAL_STEP 17 - /* * Feature disable options * These options are also useful to firmware size reduction. diff --git a/keyboards/uzu42/rev1/info.json b/keyboards/uzu42/rev1/info.json index 02d1b17be2..412b3abf56 100644 --- a/keyboards/uzu42/rev1/info.json +++ b/keyboards/uzu42/rev1/info.json @@ -20,7 +20,10 @@ "pin": "D3" }, "rgblight": { - "max_brightness": 120 + "hue_steps": 10, + "led_count": 54, + "max_brightness": 120, + "split_count": [27, 27] }, "processor": "atmega32u4", "bootloader": "caterina", diff --git a/keyboards/v60_type_r/config.h b/keyboards/v60_type_r/config.h index 8eafa8d7b5..34403d0c97 100644 --- a/keyboards/v60_type_r/config.h +++ b/keyboards/v60_type_r/config.h @@ -17,7 +17,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #pragma once -#define RGBLED_NUM 1 #define RGBLIGHT_EFFECT_BREATHING #define RGBLIGHT_EFFECT_RAINBOW_MOOD #define RGBLIGHT_EFFECT_RAINBOW_SWIRL diff --git a/keyboards/v60_type_r/info.json b/keyboards/v60_type_r/info.json index f219dd1727..8a2b7827ce 100644 --- a/keyboards/v60_type_r/info.json +++ b/keyboards/v60_type_r/info.json @@ -17,6 +17,9 @@ "pin": "F7", "on_state": 0 }, + "rgblight": { + "led_count": 1 + }, "processor": "atmega32u4", "bootloader": "atmel-dfu", "community_layouts": ["60_ansi", "60_iso"], diff --git a/keyboards/v60_type_r/keymaps/followingghosts/keymap.c b/keyboards/v60_type_r/keymaps/followingghosts/keymap.c index ab1fbd70d9..419c9ad5a7 100644 --- a/keyboards/v60_type_r/keymaps/followingghosts/keymap.c +++ b/keyboards/v60_type_r/keymaps/followingghosts/keymap.c @@ -95,8 +95,8 @@ WASD are Up Left Right Down respectively }; -void led_set_user(uint8_t usb_led) { - if (usb_led & (1<<USB_LED_CAPS_LOCK)) { +bool led_update_user(led_t led_state) { + if (led_state.caps_lock) { // output low DDRE |= (1<<PE6); PORTE &= ~(1<<PE6); @@ -106,4 +106,5 @@ void led_set_user(uint8_t usb_led) { DDRE &= ~(1<<PE6); PORTE &= ~(1<<PE6); } + return false; } diff --git a/keyboards/v60_type_r/keymaps/vimouse/keymap.c b/keyboards/v60_type_r/keymaps/vimouse/keymap.c index f426a94044..2eb06c0503 100644 --- a/keyboards/v60_type_r/keymaps/vimouse/keymap.c +++ b/keyboards/v60_type_r/keymaps/vimouse/keymap.c @@ -97,8 +97,8 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { _____, _____, _____, _____, _____, _____, _____, _____), }; -void led_set_user(uint8_t usb_led) { - if (usb_led & (1<<USB_LED_CAPS_LOCK)) { +bool led_update_user(led_t led_state) { + if (led_state.caps_lock) { // output low DDRE |= (1<<PE6); PORTE &= ~(1<<PE6); @@ -108,4 +108,5 @@ void led_set_user(uint8_t usb_led) { DDRE &= ~(1<<PE6); PORTE &= ~(1<<PE6); } + return false; } diff --git a/keyboards/v60_type_r/keymaps/xtonhasvim/keymap.c b/keyboards/v60_type_r/keymaps/xtonhasvim/keymap.c index 98bfa70d2f..f2fd693ece 100644 --- a/keyboards/v60_type_r/keymaps/xtonhasvim/keymap.c +++ b/keyboards/v60_type_r/keymaps/xtonhasvim/keymap.c @@ -69,8 +69,8 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { }; -void led_set_user(uint8_t usb_led) { - if (usb_led & (1<<USB_LED_CAPS_LOCK)) { +bool led_update_user(led_t led_state) { + if (led_state.caps_lock) { // output low DDRE |= (1<<PE6); PORTE &= ~(1<<PE6); @@ -80,6 +80,7 @@ void led_set_user(uint8_t usb_led) { DDRE &= ~(1<<PE6); PORTE &= ~(1<<PE6); } + return false; } #define C_RED 0xFF, 0x00, 0x00 diff --git a/keyboards/vertex/angle65/config.h b/keyboards/vertex/angle65/config.h index 4db0deb111..74731dd4c9 100644 --- a/keyboards/vertex/angle65/config.h +++ b/keyboards/vertex/angle65/config.h @@ -28,6 +28,5 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #define RGBLIGHT_EFFECT_RGB_TEST #define RGBLIGHT_EFFECT_ALTERNATING #define RGBLIGHT_EFFECT_TWINKLE -#define RGBLED_NUM 9 #define WS2812_SPI SPID2 #define WS2812_SPI_MOSI_PAL_MODE 5 diff --git a/keyboards/vertex/angle65/info.json b/keyboards/vertex/angle65/info.json index 03649ab072..2ad59e0642 100644 --- a/keyboards/vertex/angle65/info.json +++ b/keyboards/vertex/angle65/info.json @@ -20,6 +20,9 @@ "caps_lock": "C13", "on_state": 0 }, + "rgblight": { + "led_count": 9 + }, "ws2812": { "pin": "B15" }, diff --git a/keyboards/vertex/angle65/rules.mk b/keyboards/vertex/angle65/rules.mk index 87d5036041..2849e086e8 100644 --- a/keyboards/vertex/angle65/rules.mk +++ b/keyboards/vertex/angle65/rules.mk @@ -13,5 +13,3 @@ AUDIO_ENABLE = no # Audio output HAPTIC_ENABLE = yes HAPTIC_DRIVER += SOLENOID - -OPT_DEFS += -DCORTEX_ENABLE_WFI_IDLE=TRUE diff --git a/keyboards/vertex/angler2/config.h b/keyboards/vertex/angler2/config.h index 79cb6d6aae..5f059796c8 100644 --- a/keyboards/vertex/angler2/config.h +++ b/keyboards/vertex/angler2/config.h @@ -26,7 +26,3 @@ #define RGBLIGHT_EFFECT_RGB_TEST #define RGBLIGHT_EFFECT_ALTERNATING #define RGBLIGHT_EFFECT_TWINKLE -#define RGBLED_NUM 6 -#define RGBLIGHT_HUE_STEP 8 -#define RGBLIGHT_SAT_STEP 8 -#define RGBLIGHT_VAL_STEP 8 diff --git a/keyboards/vertex/angler2/info.json b/keyboards/vertex/angler2/info.json index 705af3fb09..b0d6f8d12c 100644 --- a/keyboards/vertex/angler2/info.json +++ b/keyboards/vertex/angler2/info.json @@ -21,6 +21,11 @@ "ws2812": { "pin": "E6" }, + "rgblight": { + "saturation_steps": 8, + "brightness_steps": 8, + "led_count": 6 + }, "processor": "atmega32u4", "bootloader": "atmel-dfu", "community_layouts": [ diff --git a/keyboards/vertex/arc60/config.h b/keyboards/vertex/arc60/config.h index 791368b5b2..3cd8a8c938 100644 --- a/keyboards/vertex/arc60/config.h +++ b/keyboards/vertex/arc60/config.h @@ -26,7 +26,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #define RGBLIGHT_EFFECT_RGB_TEST #define RGBLIGHT_EFFECT_ALTERNATING #define RGBLIGHT_EFFECT_TWINKLE -#define RGBLED_NUM 9 #define WS2812_SPI SPID2 #define WS2812_SPI_MOSI_PAL_MODE 5 diff --git a/keyboards/vertex/arc60/info.json b/keyboards/vertex/arc60/info.json index 8aa5a709d5..5564b0d3c7 100644 --- a/keyboards/vertex/arc60/info.json +++ b/keyboards/vertex/arc60/info.json @@ -18,6 +18,9 @@ "caps_lock": "C13", "on_state": 0 }, + "rgblight": { + "led_count": 9 + }, "ws2812": { "pin": "B15" }, diff --git a/keyboards/vertex/arc60/rules.mk b/keyboards/vertex/arc60/rules.mk index 5a90b0d7fe..0c92de1918 100644 --- a/keyboards/vertex/arc60/rules.mk +++ b/keyboards/vertex/arc60/rules.mk @@ -17,5 +17,3 @@ DEFAULT_FOLDER = vertex/arc60 -# Enter lower-power sleep mode when on the ChibiOS idle thread -OPT_DEFS += -DCORTEX_ENABLE_WFI_IDLE=TRUE diff --git a/keyboards/vertex/arc60h/config.h b/keyboards/vertex/arc60h/config.h index e4cb045353..3cd8a8c938 100644 --- a/keyboards/vertex/arc60h/config.h +++ b/keyboards/vertex/arc60h/config.h @@ -16,9 +16,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #pragma once -#define LED_CAPS_LOCK_PIN C13 -#define LED_PIN_ON_STATE 0 - #define RGBLIGHT_EFFECT_BREATHING #define RGBLIGHT_EFFECT_RAINBOW_MOOD #define RGBLIGHT_EFFECT_RAINBOW_SWIRL @@ -29,7 +26,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #define RGBLIGHT_EFFECT_RGB_TEST #define RGBLIGHT_EFFECT_ALTERNATING #define RGBLIGHT_EFFECT_TWINKLE -#define RGBLED_NUM 9 #define WS2812_SPI SPID2 #define WS2812_SPI_MOSI_PAL_MODE 5 diff --git a/keyboards/vertex/arc60h/info.json b/keyboards/vertex/arc60h/info.json index 831190a516..3c6efb75ec 100644 --- a/keyboards/vertex/arc60h/info.json +++ b/keyboards/vertex/arc60h/info.json @@ -9,6 +9,13 @@ "device_version": "0.0.1", "force_nkro": true }, + "indicators": { + "caps_lock": "C13", + "on_state": 0 + }, + "rgblight": { + "led_count": 9 + }, "ws2812": { "pin": "B15", "driver": "spi" diff --git a/keyboards/vertex/arc60h/rules.mk b/keyboards/vertex/arc60h/rules.mk index 8e6bc896a6..e86dfab327 100644 --- a/keyboards/vertex/arc60h/rules.mk +++ b/keyboards/vertex/arc60h/rules.mk @@ -12,5 +12,3 @@ RGBLIGHT_ENABLE = yes # Enable keyboard RGB underglow AUDIO_ENABLE = no # Audio output SLEEP_LED_ENABLE = yes -# Enter lower-power sleep mode when on the ChibiOS idle thread -OPT_DEFS += -DCORTEX_ENABLE_WFI_IDLE=TRUE diff --git a/keyboards/viendi8l/config.h b/keyboards/viendi8l/config.h index 825ceabbd3..0538906ecc 100644 --- a/keyboards/viendi8l/config.h +++ b/keyboards/viendi8l/config.h @@ -22,8 +22,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. /* Locking resynchronize hack */ #define LOCKING_RESYNC_ENABLE -#define TAPPING_TERM 200 - #define I2C_DRIVER I2CD1 #define I2C_SCL_PIN B6 #define I2C_SDA_PIN B7 @@ -35,7 +33,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #define EARLY_INIT_PERFORM_BOOTLOADER_JUMP TRUE -#define RGBLED_NUM 4 #define RGBLIGHT_DEFAULT_VAL 0 #define WS2812_PWM_COMPLEMENTARY_OUTPUT diff --git a/keyboards/viendi8l/info.json b/keyboards/viendi8l/info.json index 301b5cc756..17449f406c 100644 --- a/keyboards/viendi8l/info.json +++ b/keyboards/viendi8l/info.json @@ -8,6 +8,9 @@ "pid": "0x0877", "device_version": "0.0.1" }, + "rgblight": { + "led_count": 4 + }, "ws2812": { "pin": "B15", "driver": "pwm" diff --git a/keyboards/viendi8l/rules.mk b/keyboards/viendi8l/rules.mk index dfa900c792..da10e34d1c 100644 --- a/keyboards/viendi8l/rules.mk +++ b/keyboards/viendi8l/rules.mk @@ -15,5 +15,3 @@ LTO_ENABLE = no EEPROM_DRIVER = i2c -# Enter lower-power sleep mode when on the ChibiOS idle thread -OPT_DEFS += -DCORTEX_ENABLE_WFI_IDLE=TRUE -DDEBUG_EEPROM_OUTPUT=TRUE diff --git a/keyboards/viktus/at101_bh/keymaps/default/keymap.c b/keyboards/viktus/at101_bh/keymaps/default/keymap.c index 692c30ac61..d05e549d21 100644 --- a/keyboards/viktus/at101_bh/keymaps/default/keymap.c +++ b/keyboards/viktus/at101_bh/keymaps/default/keymap.c @@ -19,26 +19,27 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS), }; -void led_set_user(uint8_t usb_led) { +bool led_update_user(led_t led_state) { setPinOutput(B4); setPinOutput(D6); setPinOutput(D7); - if (usb_led & (1 << USB_LED_NUM_LOCK)) { + if (led_state.num_lock) { writePinHigh(D7); } else { writePinLow(D7); } - if (usb_led & (1 << USB_LED_CAPS_LOCK)) { + if (led_state.caps_lock) { writePinHigh(B4); } else { writePinLow(B4); } - if (usb_led & (1 << USB_LED_SCROLL_LOCK)) { + if (led_state.scroll_lock) { writePinHigh(D6); } else { writePinLow(D6); } + return false; } diff --git a/keyboards/viktus/omnikey_bh/keymaps/default/keymap.c b/keyboards/viktus/omnikey_bh/keymaps/default/keymap.c index 96976ba2a3..e5fb6bf902 100644 --- a/keyboards/viktus/omnikey_bh/keymaps/default/keymap.c +++ b/keyboards/viktus/omnikey_bh/keymaps/default/keymap.c @@ -22,24 +22,25 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { ), }; -void led_set_user(uint8_t usb_led) { +bool led_update_user(led_t led_state) { DDRB |= (1 << 4) | (1 << 5) | (1 << 6); - if (usb_led & (1 << USB_LED_NUM_LOCK)) { + if (led_state.num_lock) { PORTB |= (1 << 4); } else { PORTB &= ~(1 << 4); } - if (usb_led & (1 << USB_LED_CAPS_LOCK)) { + if (led_state.caps_lock) { PORTB |= (1 << 5); } else { PORTB &= ~(1 << 5); } - if (usb_led & (1 << USB_LED_SCROLL_LOCK)) { + if (led_state.scroll_lock) { PORTB |= (1 << 6); } else { PORTB &= ~(1 << 6); } + return false; } diff --git a/keyboards/viktus/sp_mini/config.h b/keyboards/viktus/sp_mini/config.h index bc80a8ebca..d83026859d 100644 --- a/keyboards/viktus/sp_mini/config.h +++ b/keyboards/viktus/sp_mini/config.h @@ -35,10 +35,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #define RGBLIGHT_EFFECT_ALTERNATING #define RGBLIGHT_EFFECT_TWINKLE -//#define RGBLIGHT_SPLIT -#define RGBLED_NUM 24 // Number of LEDs -#define RGBLED_SPLIT { 12, 12 } - /* * Feature disable options * These options are also useful to firmware size reduction. diff --git a/keyboards/viktus/sp_mini/info.json b/keyboards/viktus/sp_mini/info.json index 19bba8fea6..60b4d1996b 100644 --- a/keyboards/viktus/sp_mini/info.json +++ b/keyboards/viktus/sp_mini/info.json @@ -26,6 +26,10 @@ } } }, + "rgblight": { + "led_count": 24, + "split_count": [12, 12] + }, "ws2812": { "pin": "E6" }, diff --git a/keyboards/vitamins_included/rev1/config.h b/keyboards/vitamins_included/rev1/config.h index 81dd72ca9e..fc729396a8 100644 --- a/keyboards/vitamins_included/rev1/config.h +++ b/keyboards/vitamins_included/rev1/config.h @@ -28,7 +28,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. /* Locking resynchronize hack */ #define LOCKING_RESYNC_ENABLE -#define RGBLED_NUM 16 // Number of LEDs #define RGBLIGHT_EFFECT_BREATHING #define RGBLIGHT_EFFECT_RAINBOW_MOOD #define RGBLIGHT_EFFECT_RAINBOW_SWIRL diff --git a/keyboards/vitamins_included/rev1/info.json b/keyboards/vitamins_included/rev1/info.json index f9fd3d018e..579ba50d14 100644 --- a/keyboards/vitamins_included/rev1/info.json +++ b/keyboards/vitamins_included/rev1/info.json @@ -10,6 +10,9 @@ "split": { "soft_serial_pin": "D0" }, + "rgblight": { + "led_count": 16 + }, "ws2812": { "pin": "F0" }, diff --git a/keyboards/vitamins_included/rev2/config.h b/keyboards/vitamins_included/rev2/config.h index ce07676fee..b4daf909dd 100644 --- a/keyboards/vitamins_included/rev2/config.h +++ b/keyboards/vitamins_included/rev2/config.h @@ -22,7 +22,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #define SPLIT_HAND_PIN B4 -#define RGBLED_NUM 12 #define RGBLIGHT_EFFECT_BREATHING #define RGBLIGHT_EFFECT_RAINBOW_MOOD #define RGBLIGHT_EFFECT_RAINBOW_SWIRL @@ -33,7 +32,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #define RGBLIGHT_EFFECT_RGB_TEST #define RGBLIGHT_EFFECT_ALTERNATING #define RGBLIGHT_EFFECT_TWINKLE -#define RGBLED_SPLIT { 6, 6 } /* Audio settings */ #ifdef AUDIO_ENABLE diff --git a/keyboards/vitamins_included/rev2/info.json b/keyboards/vitamins_included/rev2/info.json index 9170f80a7d..3c87742bcd 100644 --- a/keyboards/vitamins_included/rev2/info.json +++ b/keyboards/vitamins_included/rev2/info.json @@ -16,6 +16,10 @@ "split": { "soft_serial_pin": "D0" }, + "rgblight": { + "led_count": 12, + "split_count": [6, 6] + }, "ws2812": { "pin": "F0" }, diff --git a/keyboards/w1_at/rules.mk b/keyboards/w1_at/rules.mk index 7000bb6571..7c0709f41e 100644 --- a/keyboards/w1_at/rules.mk +++ b/keyboards/w1_at/rules.mk @@ -1,11 +1,6 @@ # Wildcard to allow APM32 MCU DFU_SUFFIX_ARGS = -v FFFF -p FFFF -# Do not put the microcontroller into power saving mode -# when we get USB suspend event. We want it to keep updating -# backlight effects. -OPT_DEFS += -DCORTEX_ENABLE_WFI_IDLE=TRUE - # Build Options # change yes to no to disable # diff --git a/keyboards/waldo/config.h b/keyboards/waldo/config.h index a0d7763711..a9e15ea7c0 100644 --- a/keyboards/waldo/config.h +++ b/keyboards/waldo/config.h @@ -49,8 +49,3 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #define RGBLIGHT_EFFECT_RGB_TEST #define RGBLIGHT_EFFECT_ALTERNATING #define RGBLIGHT_EFFECT_TWINKLE -#define RGBLED_NUM 10 -#define RGBLIGHT_HUE_STEP 8 -#define RGBLIGHT_SAT_STEP 8 -#define RGBLIGHT_VAL_STEP 8 -#define RGBLIGHT_SLEEP diff --git a/keyboards/waldo/info.json b/keyboards/waldo/info.json index 0959861ca9..b796a4d9c0 100644 --- a/keyboards/waldo/info.json +++ b/keyboards/waldo/info.json @@ -16,6 +16,12 @@ "pin": "B7", "breathing": true }, + "rgblight": { + "saturation_steps": 8, + "brightness_steps": 8, + "led_count": 10, + "sleep": true + }, "ws2812": { "pin": "B0" }, diff --git a/keyboards/walletburner/cajal/config.h b/keyboards/walletburner/cajal/config.h index 6d33342cf8..a3080656e9 100644 --- a/keyboards/walletburner/cajal/config.h +++ b/keyboards/walletburner/cajal/config.h @@ -32,7 +32,3 @@ #define RGBLIGHT_EFFECT_RGB_TEST #define RGBLIGHT_EFFECT_ALTERNATING #define RGBLIGHT_EFFECT_TWINKLE -#define RGBLED_NUM 18 -#define RGBLIGHT_HUE_STEP 8 -#define RGBLIGHT_SAT_STEP 8 -#define RGBLIGHT_VAL_STEP 8 diff --git a/keyboards/walletburner/cajal/info.json b/keyboards/walletburner/cajal/info.json index 36b6647465..61c40d1fa3 100644 --- a/keyboards/walletburner/cajal/info.json +++ b/keyboards/walletburner/cajal/info.json @@ -18,6 +18,11 @@ {"pin_a": "D6", "pin_b": "D7"} ] }, + "rgblight": { + "saturation_steps": 8, + "brightness_steps": 8, + "led_count": 18 + }, "ws2812": { "pin": "F7" }, diff --git a/keyboards/walletburner/neuron/config.h b/keyboards/walletburner/neuron/config.h index 2dae864ddb..d702489ee7 100644 --- a/keyboards/walletburner/neuron/config.h +++ b/keyboards/walletburner/neuron/config.h @@ -16,7 +16,3 @@ #define RGBLIGHT_EFFECT_RGB_TEST #define RGBLIGHT_EFFECT_ALTERNATING #define RGBLIGHT_EFFECT_TWINKLE -#define RGBLED_NUM 1 -#define RGBLIGHT_HUE_STEP 8 -#define RGBLIGHT_SAT_STEP 8 -#define RGBLIGHT_VAL_STEP 8 diff --git a/keyboards/walletburner/neuron/info.json b/keyboards/walletburner/neuron/info.json index fb6b3e96f8..b05c0c8135 100644 --- a/keyboards/walletburner/neuron/info.json +++ b/keyboards/walletburner/neuron/info.json @@ -8,6 +8,11 @@ "pid": "0x6E75", "device_version": "0.0.1" }, + "rgblight": { + "saturation_steps": 8, + "brightness_steps": 8, + "led_count": 1 + }, "ws2812": { "pin": "B1" }, diff --git a/keyboards/waterfowl/config.h b/keyboards/waterfowl/config.h index 40d9a4b8da..2ddc7228d4 100644 --- a/keyboards/waterfowl/config.h +++ b/keyboards/waterfowl/config.h @@ -20,6 +20,3 @@ #define SPLIT_MODS_ENABLE #define SPLIT_WPM_ENABLE #define SPLIT_USB_DETECT - -// Tapping term -#define TAPPING_TERM 200
\ No newline at end of file diff --git a/keyboards/wavtype/foundation/config.h b/keyboards/wavtype/foundation/config.h index 09d5a7bf8a..b4282501bd 100644 --- a/keyboards/wavtype/foundation/config.h +++ b/keyboards/wavtype/foundation/config.h @@ -3,11 +3,6 @@ #pragma once -# define RGBLED_NUM 16 -# define RGBLIGHT_HUE_STEP 8 -# define RGBLIGHT_SAT_STEP 8 -# define RGBLIGHT_VAL_STEP 8 -# define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */ #define RGBLIGHT_EFFECT_BREATHING #define RGBLIGHT_EFFECT_RAINBOW_MOOD #define RGBLIGHT_EFFECT_RAINBOW_SWIRL diff --git a/keyboards/wavtype/foundation/info.json b/keyboards/wavtype/foundation/info.json index ea0adf2ee5..de211cc788 100644 --- a/keyboards/wavtype/foundation/info.json +++ b/keyboards/wavtype/foundation/info.json @@ -8,6 +8,12 @@ "pid": "0x0003", "device_version": "0.0.1" }, + "rgblight": { + "saturation_steps": 8, + "brightness_steps": 8, + "led_count": 16, + "sleep": true + }, "ws2812": { "pin": "B0" }, diff --git a/keyboards/wavtype/p01_ultra/config.h b/keyboards/wavtype/p01_ultra/config.h index e6b401aa75..0b204e4a77 100644 --- a/keyboards/wavtype/p01_ultra/config.h +++ b/keyboards/wavtype/p01_ultra/config.h @@ -17,11 +17,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #pragma once -# define RGBLED_NUM 18 -# define RGBLIGHT_HUE_STEP 8 -# define RGBLIGHT_SAT_STEP 8 -# define RGBLIGHT_VAL_STEP 8 -# define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */ /*== or choose animations ==*/ # define RGBLIGHT_EFFECT_BREATHING # define RGBLIGHT_EFFECT_RAINBOW_MOOD diff --git a/keyboards/wavtype/p01_ultra/info.json b/keyboards/wavtype/p01_ultra/info.json index fa04ce7850..f249c34ac0 100644 --- a/keyboards/wavtype/p01_ultra/info.json +++ b/keyboards/wavtype/p01_ultra/info.json @@ -8,6 +8,12 @@ "pid": "0x0004", "device_version": "0.0.1" }, + "rgblight": { + "saturation_steps": 8, + "brightness_steps": 8, + "led_count": 18, + "sleep": true + }, "ws2812": { "pin": "E6" }, diff --git a/keyboards/weirdo/geminate60/config.h b/keyboards/weirdo/geminate60/config.h index 948bd0c7f1..5e0e8b40a9 100644 --- a/keyboards/weirdo/geminate60/config.h +++ b/keyboards/weirdo/geminate60/config.h @@ -15,12 +15,6 @@ */ #pragma once -#define RGBLED_NUM 1 -//#define RGBLIGHT_DISABLE_KEYCODES - - - - /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ #define LOCKING_SUPPORT_ENABLE diff --git a/keyboards/weirdo/geminate60/info.json b/keyboards/weirdo/geminate60/info.json index e8bda126ea..722d1d3bfe 100644 --- a/keyboards/weirdo/geminate60/info.json +++ b/keyboards/weirdo/geminate60/info.json @@ -8,6 +8,9 @@ "pid": "0x676D", "device_version": "0.0.1" }, + "rgblight": { + "led_count": 1 + }, "ws2812": { "pin": "A6" }, diff --git a/keyboards/weirdo/kelowna/rgb64/config.h b/keyboards/weirdo/kelowna/rgb64/config.h index 0a446abeba..5c0ed9cf61 100644 --- a/keyboards/weirdo/kelowna/rgb64/config.h +++ b/keyboards/weirdo/kelowna/rgb64/config.h @@ -15,12 +15,6 @@ */ #pragma once -#define RGBLED_NUM 64 -//#define RGBLIGHT_DISABLE_KEYCODES - - - - /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ #define LOCKING_SUPPORT_ENABLE diff --git a/keyboards/weirdo/kelowna/rgb64/info.json b/keyboards/weirdo/kelowna/rgb64/info.json index 89053ba9cc..12188f6f30 100644 --- a/keyboards/weirdo/kelowna/rgb64/info.json +++ b/keyboards/weirdo/kelowna/rgb64/info.json @@ -8,6 +8,9 @@ "pid": "0x4C64", "device_version": "0.0.1" }, + "rgblight": { + "led_count": 64 + }, "ws2812": { "pin": "A6" }, diff --git a/keyboards/weirdo/ls_60/config.h b/keyboards/weirdo/ls_60/config.h index d2b9299c8f..5c0ed9cf61 100644 --- a/keyboards/weirdo/ls_60/config.h +++ b/keyboards/weirdo/ls_60/config.h @@ -15,12 +15,6 @@ */ #pragma once -#define RGBLED_NUM 1 -//#define RGBLIGHT_DISABLE_KEYCODES - - - - /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ #define LOCKING_SUPPORT_ENABLE diff --git a/keyboards/weirdo/ls_60/info.json b/keyboards/weirdo/ls_60/info.json index f386d40b66..0dadf9d32c 100644 --- a/keyboards/weirdo/ls_60/info.json +++ b/keyboards/weirdo/ls_60/info.json @@ -8,6 +8,9 @@ "pid": "0x4C53", "device_version": "0.0.1" }, + "rgblight": { + "led_count": 1 + }, "ws2812": { "pin": "A6" }, diff --git a/keyboards/weirdo/naiping/np64/config.h b/keyboards/weirdo/naiping/np64/config.h index 2c31247277..2c7e4c037b 100644 --- a/keyboards/weirdo/naiping/np64/config.h +++ b/keyboards/weirdo/naiping/np64/config.h @@ -15,12 +15,6 @@ */ #pragma once -#define RGBLED_NUM 80 -//#define RGBLIGHT_DISABLE_KEYCODES - - - - /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ #define LOCKING_SUPPORT_ENABLE diff --git a/keyboards/weirdo/naiping/np64/info.json b/keyboards/weirdo/naiping/np64/info.json index 0f91be1b83..63e6297f7d 100644 --- a/keyboards/weirdo/naiping/np64/info.json +++ b/keyboards/weirdo/naiping/np64/info.json @@ -8,6 +8,9 @@ "pid": "0x7064", "device_version": "0.0.1" }, + "rgblight": { + "led_count": 80 + }, "ws2812": { "pin": "B1" }, diff --git a/keyboards/weirdo/naiping/nphhkb/config.h b/keyboards/weirdo/naiping/nphhkb/config.h index 0a3df009ab..5c0ed9cf61 100644 --- a/keyboards/weirdo/naiping/nphhkb/config.h +++ b/keyboards/weirdo/naiping/nphhkb/config.h @@ -15,12 +15,6 @@ */ #pragma once -#define RGBLED_NUM 78 -//#define RGBLIGHT_DISABLE_KEYCODES - - - - /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ #define LOCKING_SUPPORT_ENABLE diff --git a/keyboards/weirdo/naiping/nphhkb/info.json b/keyboards/weirdo/naiping/nphhkb/info.json index 730c17c61f..931f81db1f 100644 --- a/keyboards/weirdo/naiping/nphhkb/info.json +++ b/keyboards/weirdo/naiping/nphhkb/info.json @@ -8,6 +8,9 @@ "pid": "0x7068", "device_version": "0.0.1" }, + "rgblight": { + "led_count": 78 + }, "ws2812": { "pin": "A7" }, diff --git a/keyboards/weirdo/naiping/npminila/config.h b/keyboards/weirdo/naiping/npminila/config.h index 782833a3af..5c0ed9cf61 100644 --- a/keyboards/weirdo/naiping/npminila/config.h +++ b/keyboards/weirdo/naiping/npminila/config.h @@ -15,12 +15,6 @@ */ #pragma once -#define RGBLED_NUM 82 -//#define RGBLIGHT_DISABLE_KEYCODES - - - - /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ #define LOCKING_SUPPORT_ENABLE diff --git a/keyboards/weirdo/naiping/npminila/info.json b/keyboards/weirdo/naiping/npminila/info.json index 5162849225..3824802e02 100644 --- a/keyboards/weirdo/naiping/npminila/info.json +++ b/keyboards/weirdo/naiping/npminila/info.json @@ -8,6 +8,9 @@ "pid": "0x706D", "device_version": "0.0.1" }, + "rgblight": { + "led_count": 82 + }, "ws2812": { "pin": "D1" }, diff --git a/keyboards/wekey/we27/encoder_actions.c b/keyboards/wekey/we27/encoder_actions.c deleted file mode 100644 index 87a53676e6..0000000000 --- a/keyboards/wekey/we27/encoder_actions.c +++ /dev/null @@ -1,52 +0,0 @@ -/* Copyright 2020 Neil Brian Ramirez - * Copyright 2021 drashna jael're (@drashna) - * Copyright 2021 uybv - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 3 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see <http://www.gnu.org/licenses/>. - */ - -#include "encoder_actions.h" - -#ifdef ENCODER_ENABLE -static uint8_t encoder_state[NUM_ENCODERS] = {0}; -static keypos_t encoder_cw[NUM_ENCODERS] = ENCODERS_CW_KEY; -static keypos_t encoder_ccw[NUM_ENCODERS] = ENCODERS_CCW_KEY; - -void encoder_action_unregister(void) { - for (int index = 0; index < NUM_ENCODERS; ++index) { - if (encoder_state[index]) { - keyevent_t encoder_event = (keyevent_t) { - .key = encoder_state[index] >> 1 ? encoder_cw[index] : encoder_ccw[index], - .pressed = false, - .time = timer_read(), - .type = KEY_EVENT - }; - encoder_state[index] = 0; - action_exec(encoder_event); - } - } -} - -void encoder_action_register(uint8_t index, bool clockwise) { - keyevent_t encoder_event = (keyevent_t) { - .key = clockwise ? encoder_cw[index] : encoder_ccw[index], - .pressed = true, - .time = timer_read(), - .type = KEY_EVENT - }; - encoder_state[index] = (clockwise ^ 1) | (clockwise << 1); - action_exec(encoder_event); -} - -#endif diff --git a/keyboards/wekey/we27/encoder_actions.h b/keyboards/wekey/we27/encoder_actions.h deleted file mode 100644 index 1a7fb72014..0000000000 --- a/keyboards/wekey/we27/encoder_actions.h +++ /dev/null @@ -1,23 +0,0 @@ -/* Copyright 2020 Neil Brian Ramirez - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 3 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see <http://www.gnu.org/licenses/>. - */ - -#pragma once - -#include "quantum.h" - -void encoder_action_unregister(void); - -void encoder_action_register(uint8_t index, bool clockwise); diff --git a/keyboards/wekey/we27/info.json b/keyboards/wekey/we27/info.json index 7fa45a13ab..62b477bce5 100644 --- a/keyboards/wekey/we27/info.json +++ b/keyboards/wekey/we27/info.json @@ -63,45 +63,6 @@ {"matrix": [5, 3], "x": 3, "y": 5.5}, {"matrix": [4, 4], "x": 4, "y": 4.5, "h": 2} ] - }, - "LAYOUT_numpad_6x5_encoder": { - "layout": [ - {"matrix": [0, 0], "x": 0, "y": 0.75}, - {"matrix": [0, 1], "x": 1, "y": 0.75}, - {"matrix": [0, 2], "x": 2, "y": 0.75}, - {"matrix": [0, 3], "x": 3, "y": 0.75}, - {"matrix": [0, 4], "x": 4, "y": 0.75}, - - {"matrix": [3, 4], "x": 3.75, "y": 0, "w": 0.75, "h": 0.75}, - {"matrix": [5, 4], "x": 4.5, "y": 0, "w": 0.75, "h": 0.75}, - - {"matrix": [1, 0], "x": 0, "y": 2.25}, - {"matrix": [1, 1], "x": 1, "y": 2.25}, - {"matrix": [1, 2], "x": 2, "y": 2.25}, - {"matrix": [1, 3], "x": 3, "y": 2.25}, - {"matrix": [1, 4], "x": 4, "y": 2.25}, - - {"matrix": [2, 0], "x": 0, "y": 3.25}, - {"matrix": [2, 1], "x": 1, "y": 3.25}, - {"matrix": [2, 2], "x": 2, "y": 3.25}, - {"matrix": [2, 3], "x": 3, "y": 3.25}, - - {"matrix": [3, 0], "x": 0, "y": 4.25}, - {"matrix": [3, 1], "x": 1, "y": 4.25}, - {"matrix": [3, 2], "x": 2, "y": 4.25}, - {"matrix": [3, 3], "x": 3, "y": 4.25}, - {"matrix": [2, 4], "x": 4, "y": 3.25, "h": 2}, - - {"matrix": [4, 0], "x": 0, "y": 5.25}, - {"matrix": [4, 1], "x": 1, "y": 5.25}, - {"matrix": [4, 2], "x": 2, "y": 5.25}, - {"matrix": [4, 3], "x": 3, "y": 5.25}, - - {"matrix": [5, 0], "x": 0, "y": 6.25}, - {"matrix": [5, 1], "x": 1, "y": 6.25, "w": 2}, - {"matrix": [5, 3], "x": 3, "y": 6.25}, - {"matrix": [4, 4], "x": 4, "y": 5.25, "h": 2} - ] } } } diff --git a/keyboards/wekey/we27/keymaps/default/keymap.c b/keyboards/wekey/we27/keymaps/default/keymap.c index 741b25e3e7..cd2d215d2c 100644 --- a/keyboards/wekey/we27/keymaps/default/keymap.c +++ b/keyboards/wekey/we27/keymaps/default/keymap.c @@ -17,32 +17,32 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { /* Base */ - [0] = LAYOUT_numpad_6x5_encoder( - KC_ESC , KC_PWR , KC_SLEP, KC_F11 , KC_MUTE, KC_VOLD, KC_VOLU, + [0] = LAYOUT_numpad_6x5( + KC_ESC , KC_PWR , KC_SLEP, KC_F11 , KC_MUTE, KC_NUM, KC_BSPC, KC_PSLS, KC_PAST, KC_PMNS, RGB_MOD, KC_P7 , KC_P8 , KC_P9 , RGB_RMOD, KC_P4 , KC_P5 , KC_P6 , KC_PPLS, RGB_TOG, KC_P1 , KC_P2 , KC_P3 , MO(1) , KC_P0 , KC_PDOT, KC_PENT ), - [1] = LAYOUT_numpad_6x5_encoder( - _______, _______, _______, _______, KC_MPLY, KC_MPRV, KC_MNXT, + [1] = LAYOUT_numpad_6x5( + _______, _______, _______, _______, KC_MPLY, _______, _______, _______, _______, _______, RGB_SPI, RGB_HUI, RGB_SAI, RGB_VAI, RGB_SPD, RGB_HUD, RGB_SAD, RGB_VAD, _______, - _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, QK_BOOT ), - [2] = LAYOUT_numpad_6x5_encoder( - _______, _______, _______, _______, _______, _______, _______, + [2] = LAYOUT_numpad_6x5( + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______ ), - [3] = LAYOUT_numpad_6x5_encoder( - _______, _______, _______, _______, _______, _______, _______, + [3] = LAYOUT_numpad_6x5( + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, @@ -50,3 +50,12 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { _______, _______, _______, _______ ) }; + +#ifdef ENCODER_MAP_ENABLE +const uint16_t PROGMEM encoder_map[][NUM_ENCODERS][NUM_DIRECTIONS] = { + [0] = { ENCODER_CCW_CW(KC_VOLD, KC_VOLU) }, + [1] = { ENCODER_CCW_CW(_______, _______) }, + [2] = { ENCODER_CCW_CW(_______, _______) }, + [3] = { ENCODER_CCW_CW(_______, _______) }, +}; +#endif diff --git a/keyboards/wekey/we27/keymaps/default/rules.mk b/keyboards/wekey/we27/keymaps/default/rules.mk new file mode 100644 index 0000000000..ee32568148 --- /dev/null +++ b/keyboards/wekey/we27/keymaps/default/rules.mk @@ -0,0 +1 @@ +ENCODER_MAP_ENABLE = yes diff --git a/keyboards/wekey/we27/keymaps/via/keymap.c b/keyboards/wekey/we27/keymaps/via/keymap.c index 741b25e3e7..cd2d215d2c 100644 --- a/keyboards/wekey/we27/keymaps/via/keymap.c +++ b/keyboards/wekey/we27/keymaps/via/keymap.c @@ -17,32 +17,32 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { /* Base */ - [0] = LAYOUT_numpad_6x5_encoder( - KC_ESC , KC_PWR , KC_SLEP, KC_F11 , KC_MUTE, KC_VOLD, KC_VOLU, + [0] = LAYOUT_numpad_6x5( + KC_ESC , KC_PWR , KC_SLEP, KC_F11 , KC_MUTE, KC_NUM, KC_BSPC, KC_PSLS, KC_PAST, KC_PMNS, RGB_MOD, KC_P7 , KC_P8 , KC_P9 , RGB_RMOD, KC_P4 , KC_P5 , KC_P6 , KC_PPLS, RGB_TOG, KC_P1 , KC_P2 , KC_P3 , MO(1) , KC_P0 , KC_PDOT, KC_PENT ), - [1] = LAYOUT_numpad_6x5_encoder( - _______, _______, _______, _______, KC_MPLY, KC_MPRV, KC_MNXT, + [1] = LAYOUT_numpad_6x5( + _______, _______, _______, _______, KC_MPLY, _______, _______, _______, _______, _______, RGB_SPI, RGB_HUI, RGB_SAI, RGB_VAI, RGB_SPD, RGB_HUD, RGB_SAD, RGB_VAD, _______, - _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, QK_BOOT ), - [2] = LAYOUT_numpad_6x5_encoder( - _______, _______, _______, _______, _______, _______, _______, + [2] = LAYOUT_numpad_6x5( + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______ ), - [3] = LAYOUT_numpad_6x5_encoder( - _______, _______, _______, _______, _______, _______, _______, + [3] = LAYOUT_numpad_6x5( + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, @@ -50,3 +50,12 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { _______, _______, _______, _______ ) }; + +#ifdef ENCODER_MAP_ENABLE +const uint16_t PROGMEM encoder_map[][NUM_ENCODERS][NUM_DIRECTIONS] = { + [0] = { ENCODER_CCW_CW(KC_VOLD, KC_VOLU) }, + [1] = { ENCODER_CCW_CW(_______, _______) }, + [2] = { ENCODER_CCW_CW(_______, _______) }, + [3] = { ENCODER_CCW_CW(_______, _______) }, +}; +#endif diff --git a/keyboards/wekey/we27/keymaps/via/rules.mk b/keyboards/wekey/we27/keymaps/via/rules.mk index 36b7ba9cbc..1189f4ad19 100644 --- a/keyboards/wekey/we27/keymaps/via/rules.mk +++ b/keyboards/wekey/we27/keymaps/via/rules.mk @@ -1,2 +1,3 @@ VIA_ENABLE = yes LTO_ENABLE = yes +ENCODER_MAP_ENABLE = yes diff --git a/keyboards/wekey/we27/rules.mk b/keyboards/wekey/we27/rules.mk index c76f29ff75..e799183b38 100644 --- a/keyboards/wekey/we27/rules.mk +++ b/keyboards/wekey/we27/rules.mk @@ -15,5 +15,3 @@ RGB_MATRIX_ENABLE = yes # Use RGB matrix DEBOUNCE_TYPE = sym_defer_pk RGB_MATRIX_CUSTOM_KB = yes - -SRC += encoder_actions.c diff --git a/keyboards/wekey/we27/we27.c b/keyboards/wekey/we27/we27.c index 9f2b85d95f..03ec6f5512 100644 --- a/keyboards/wekey/we27/we27.c +++ b/keyboards/wekey/we27/we27.c @@ -15,7 +15,6 @@ */ #include "quantum.h" -#include "encoder_actions.h" #ifdef RGB_MATRIX_ENABLE @@ -45,14 +44,3 @@ led_config_t g_led_config = { { } }; #endif - -void matrix_scan_kb(void) { - encoder_action_unregister(); - matrix_scan_user(); -} - -bool encoder_update_kb(uint8_t index, bool clockwise) { - if (!encoder_update_user(index, clockwise)) { return false; } - encoder_action_register(index, clockwise); - return true; -}; diff --git a/keyboards/westfoxtrot/aanzee/config.h b/keyboards/westfoxtrot/aanzee/config.h index 9a29563ec7..8418197eb6 100644 --- a/keyboards/westfoxtrot/aanzee/config.h +++ b/keyboards/westfoxtrot/aanzee/config.h @@ -17,11 +17,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #pragma once - #define RGBLED_NUM 9 - #define RGBLIGHT_HUE_STEP 12 - #define RGBLIGHT_SAT_STEP 25 - #define RGBLIGHT_VAL_STEP 12 - #define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */ #define RGBLIGHT_EFFECT_BREATHING #define RGBLIGHT_EFFECT_RAINBOW_MOOD #define RGBLIGHT_EFFECT_RAINBOW_SWIRL diff --git a/keyboards/westfoxtrot/aanzee/info.json b/keyboards/westfoxtrot/aanzee/info.json index 9dd3fcb2a4..2ad13e2cc7 100644 --- a/keyboards/westfoxtrot/aanzee/info.json +++ b/keyboards/westfoxtrot/aanzee/info.json @@ -22,6 +22,13 @@ "caps_lock": "B2", "on_state": 0 }, + "rgblight": { + "hue_steps": 12, + "saturation_steps": 25, + "brightness_steps": 12, + "led_count": 9, + "sleep": true + }, "ws2812": { "pin": "E6" }, diff --git a/keyboards/westfoxtrot/cyclops/keymaps/peippo/keymap.c b/keyboards/westfoxtrot/cyclops/keymaps/peippo/keymap.c index 94d134d7c9..40f8c98344 100644 --- a/keyboards/westfoxtrot/cyclops/keymaps/peippo/keymap.c +++ b/keyboards/westfoxtrot/cyclops/keymaps/peippo/keymap.c @@ -61,19 +61,3 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { KC_LSFT, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_RSFT, _______, KC_MPLY, _______, _______, _______, _______, _______, _______, KC_MRWD, KC_MUTE, KC_MFFD), }; - -bool process_record_user(uint16_t keycode, keyrecord_t *record) { - return true; -} - -void matrix_init_user(void) { - -} - -void matrix_scan_user(void) { - -} - -void led_set_user(uint8_t usb_led) { - -} diff --git a/keyboards/westfoxtrot/cypher/rev1/keymaps/kwer/keymap.c b/keyboards/westfoxtrot/cypher/rev1/keymaps/kwer/keymap.c index eed5e664a8..9763abe369 100644 --- a/keyboards/westfoxtrot/cypher/rev1/keymaps/kwer/keymap.c +++ b/keyboards/westfoxtrot/cypher/rev1/keymaps/kwer/keymap.c @@ -51,23 +51,9 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { ), }; - - -void matrix_init_user(void) { - //user initialization -} - -void matrix_scan_user(void) { - //user matrix -} - -bool process_record_user(uint16_t keycode, keyrecord_t *record) { - return true; -} - -void led_set_user(uint8_t usb_led) { +bool led_update_user(led_t led_state) { // Insert custom handling for CAPS_LOCK, NUM_LOCK, SCROLL_LOCK here - if (IS_LED_ON(usb_led, USB_LED_NUM_LOCK)) { + if (led_state.num_lock) { writePinHigh(F4); writePinHigh(F1); writePinHigh(F5); @@ -76,4 +62,5 @@ void led_set_user(uint8_t usb_led) { writePinLow(F1); writePinLow(F5); } + return false; } diff --git a/keyboards/westfoxtrot/cypher/rev5/config.h b/keyboards/westfoxtrot/cypher/rev5/config.h index ed68bff9d4..d2a2e109d9 100644 --- a/keyboards/westfoxtrot/cypher/rev5/config.h +++ b/keyboards/westfoxtrot/cypher/rev5/config.h @@ -27,11 +27,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. */ #define GRAVE_ESC_CTRL_OVERRIDE - #define RGBLED_NUM 10 - #define RGBLIGHT_HUE_STEP 12 - #define RGBLIGHT_SAT_STEP 25 - #define RGBLIGHT_VAL_STEP 12 - #define RGBLIGHT_SLEEP #define RGBLIGHT_EFFECT_BREATHING #define RGBLIGHT_EFFECT_RAINBOW_MOOD #define RGBLIGHT_EFFECT_RAINBOW_SWIRL diff --git a/keyboards/westfoxtrot/cypher/rev5/info.json b/keyboards/westfoxtrot/cypher/rev5/info.json index d3f57b6e67..c7e62632e2 100644 --- a/keyboards/westfoxtrot/cypher/rev5/info.json +++ b/keyboards/westfoxtrot/cypher/rev5/info.json @@ -16,6 +16,13 @@ "levels": 5, "breathing": true }, + "rgblight": { + "hue_steps": 12, + "saturation_steps": 25, + "brightness_steps": 12, + "led_count": 10, + "sleep": true + }, "ws2812": { "pin": "E6" }, diff --git a/keyboards/westfoxtrot/prophet/rules.mk b/keyboards/westfoxtrot/prophet/rules.mk index 1d3680aec1..14d4af4e14 100644 --- a/keyboards/westfoxtrot/prophet/rules.mk +++ b/keyboards/westfoxtrot/prophet/rules.mk @@ -11,5 +11,3 @@ SLEEP_LED_ENABLE = yes BACKLIGHT_ENABLE = no RGBLIGHT_ENABLE = no -# Enter lower-power sleep mode when on the ChibiOS idle thread -OPT_DEFS += -DCORTEX_ENABLE_WFI_IDLE=TRUE diff --git a/keyboards/westm/westm68/rev1/config.h b/keyboards/westm/westm68/rev1/config.h index db711fcfd9..af49da747a 100644 --- a/keyboards/westm/westm68/rev1/config.h +++ b/keyboards/westm/westm68/rev1/config.h @@ -16,7 +16,6 @@ #pragma once -#define RGBLED_NUM 16 #define RGBLIGHT_EFFECT_BREATHING #define RGBLIGHT_EFFECT_RAINBOW_MOOD #define RGBLIGHT_EFFECT_RAINBOW_SWIRL diff --git a/keyboards/westm/westm68/rev1/info.json b/keyboards/westm/westm68/rev1/info.json index 70c31e162b..c81abf2611 100644 --- a/keyboards/westm/westm68/rev1/info.json +++ b/keyboards/westm/westm68/rev1/info.json @@ -2,6 +2,9 @@ "usb": { "pid": "0x0101" }, + "rgblight": { + "led_count": 16 + }, "ws2812": { "pin": "A8" } diff --git a/keyboards/westm/westm68/rev2/config.h b/keyboards/westm/westm68/rev2/config.h index db711fcfd9..af49da747a 100644 --- a/keyboards/westm/westm68/rev2/config.h +++ b/keyboards/westm/westm68/rev2/config.h @@ -16,7 +16,6 @@ #pragma once -#define RGBLED_NUM 16 #define RGBLIGHT_EFFECT_BREATHING #define RGBLIGHT_EFFECT_RAINBOW_MOOD #define RGBLIGHT_EFFECT_RAINBOW_SWIRL diff --git a/keyboards/westm/westm68/rev2/info.json b/keyboards/westm/westm68/rev2/info.json index 50711496d3..3bb3362a7d 100644 --- a/keyboards/westm/westm68/rev2/info.json +++ b/keyboards/westm/westm68/rev2/info.json @@ -2,6 +2,9 @@ "usb": { "pid": "0x0102" }, + "rgblight": { + "led_count": 16 + }, "ws2812": { "pin": "A8" } diff --git a/keyboards/westm/westm9/rev1/config.h b/keyboards/westm/westm9/rev1/config.h index 17de75167c..2985e7ec59 100644 --- a/keyboards/westm/westm9/rev1/config.h +++ b/keyboards/westm/westm9/rev1/config.h @@ -16,7 +16,6 @@ #pragma once -#define RGBLED_NUM 14 #define RGBLIGHT_EFFECT_BREATHING #define RGBLIGHT_EFFECT_RAINBOW_MOOD #define RGBLIGHT_EFFECT_RAINBOW_SWIRL diff --git a/keyboards/westm/westm9/rev1/info.json b/keyboards/westm/westm9/rev1/info.json index 5986e5c1c8..06998fc670 100644 --- a/keyboards/westm/westm9/rev1/info.json +++ b/keyboards/westm/westm9/rev1/info.json @@ -2,6 +2,9 @@ "usb": { "pid": "0x0301" }, + "rgblight": { + "led_count": 14 + }, "ws2812": { "pin": "F1" } diff --git a/keyboards/westm/westm9/rev2/config.h b/keyboards/westm/westm9/rev2/config.h index 17de75167c..2985e7ec59 100644 --- a/keyboards/westm/westm9/rev2/config.h +++ b/keyboards/westm/westm9/rev2/config.h @@ -16,7 +16,6 @@ #pragma once -#define RGBLED_NUM 14 #define RGBLIGHT_EFFECT_BREATHING #define RGBLIGHT_EFFECT_RAINBOW_MOOD #define RGBLIGHT_EFFECT_RAINBOW_SWIRL diff --git a/keyboards/westm/westm9/rev2/info.json b/keyboards/westm/westm9/rev2/info.json index faebf5d443..dfe9215991 100644 --- a/keyboards/westm/westm9/rev2/info.json +++ b/keyboards/westm/westm9/rev2/info.json @@ -2,6 +2,9 @@ "usb": { "pid": "0x0302" }, + "rgblight": { + "led_count": 14 + }, "ws2812": { "pin": "F1" } diff --git a/keyboards/westm/westmergo/config.h b/keyboards/westm/westmergo/config.h index 2b64827856..2470026c0a 100644 --- a/keyboards/westm/westmergo/config.h +++ b/keyboards/westm/westmergo/config.h @@ -26,7 +26,6 @@ #define RGBLIGHT_EFFECT_RGB_TEST #define RGBLIGHT_EFFECT_ALTERNATING #define RGBLIGHT_EFFECT_TWINKLE -#define RGBLED_NUM 16 /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ #define LOCKING_SUPPORT_ENABLE diff --git a/keyboards/westm/westmergo/info.json b/keyboards/westm/westmergo/info.json index 30e82dfad6..6b8ac58168 100644 --- a/keyboards/westm/westmergo/info.json +++ b/keyboards/westm/westmergo/info.json @@ -8,6 +8,9 @@ "pid": "0x0201", "device_version": "0.0.1" }, + "rgblight": { + "led_count": 16 + }, "ws2812": { "pin": "A8" }, diff --git a/keyboards/wilba_tech/wt70_jb/config.h b/keyboards/wilba_tech/wt70_jb/config.h index 914d9b2763..83db90da84 100644 --- a/keyboards/wilba_tech/wt70_jb/config.h +++ b/keyboards/wilba_tech/wt70_jb/config.h @@ -21,10 +21,6 @@ #define LOCKING_RESYNC_ENABLE // RGBLIGHT configuation - #define RGBLED_NUM 2 - #define RGBLIGHT_HUE_STEP 8 - #define RGBLIGHT_SAT_STEP 8 - #define RGBLIGHT_VAL_STEP 8 #define RGBLIGHT_EFFECT_BREATHING #define RGBLIGHT_EFFECT_RAINBOW_MOOD #define RGBLIGHT_EFFECT_RAINBOW_SWIRL diff --git a/keyboards/wilba_tech/wt70_jb/info.json b/keyboards/wilba_tech/wt70_jb/info.json index d750e86d90..b03e9e6f73 100644 --- a/keyboards/wilba_tech/wt70_jb/info.json +++ b/keyboards/wilba_tech/wt70_jb/info.json @@ -8,6 +8,11 @@ "pid": "0x001F", "device_version": "0.0.1" }, + "rgblight": { + "saturation_steps": 8, + "brightness_steps": 8, + "led_count": 2 + }, "ws2812": { "pin": "B2" }, diff --git a/keyboards/winkeyless/b87/config.h b/keyboards/winkeyless/b87/config.h index b585802fb8..5ab439e574 100644 --- a/keyboards/winkeyless/b87/config.h +++ b/keyboards/winkeyless/b87/config.h @@ -16,7 +16,6 @@ #pragma once -#define RGBLED_NUM 20 // Number of LEDs // RGB effects #define RGBLIGHT_EFFECT_BREATHING #define RGBLIGHT_EFFECT_RAINBOW_MOOD diff --git a/keyboards/winkeyless/b87/info.json b/keyboards/winkeyless/b87/info.json index 10b20c41c0..1b2e0f25c2 100644 --- a/keyboards/winkeyless/b87/info.json +++ b/keyboards/winkeyless/b87/info.json @@ -16,6 +16,9 @@ "backlight": { "pin": "D4" }, + "rgblight": { + "led_count": 20 + }, "ws2812": { "driver": "i2c" }, diff --git a/keyboards/winkeyless/bface/config.h b/keyboards/winkeyless/bface/config.h index b7529e4311..e24f2037b0 100644 --- a/keyboards/winkeyless/bface/config.h +++ b/keyboards/winkeyless/bface/config.h @@ -18,7 +18,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #pragma once -#define RGBLED_NUM 16 #define RGBLIGHT_EFFECT_BREATHING #define RGBLIGHT_EFFECT_RAINBOW_MOOD #define RGBLIGHT_EFFECT_RAINBOW_SWIRL diff --git a/keyboards/winkeyless/bface/info.json b/keyboards/winkeyless/bface/info.json index 2d716a89c7..2b31d7c3ab 100644 --- a/keyboards/winkeyless/bface/info.json +++ b/keyboards/winkeyless/bface/info.json @@ -16,6 +16,9 @@ "backlight": { "pin": "D4" }, + "rgblight": { + "led_count": 16 + }, "ws2812": { "driver": "i2c" }, diff --git a/keyboards/winkeyless/bmini/config.h b/keyboards/winkeyless/bmini/config.h index ddc21dae30..d849732a07 100644 --- a/keyboards/winkeyless/bmini/config.h +++ b/keyboards/winkeyless/bmini/config.h @@ -17,9 +17,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #pragma once - -#define RGBLED_NUM 16 - #define RGBLIGHT_EFFECT_BREATHING #define RGBLIGHT_EFFECT_RAINBOW_MOOD #define RGBLIGHT_EFFECT_RAINBOW_SWIRL diff --git a/keyboards/winkeyless/bmini/info.json b/keyboards/winkeyless/bmini/info.json index 2a18caeed4..10a51febc0 100644 --- a/keyboards/winkeyless/bmini/info.json +++ b/keyboards/winkeyless/bmini/info.json @@ -16,6 +16,9 @@ "backlight": { "pin": "D4" }, + "rgblight": { + "led_count": 16 + }, "ws2812": { "driver": "i2c" }, diff --git a/keyboards/winkeyless/bminiex/config.h b/keyboards/winkeyless/bminiex/config.h index 116c09d6ac..d849732a07 100644 --- a/keyboards/winkeyless/bminiex/config.h +++ b/keyboards/winkeyless/bminiex/config.h @@ -17,9 +17,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #pragma once - -#define RGBLED_NUM 20 - #define RGBLIGHT_EFFECT_BREATHING #define RGBLIGHT_EFFECT_RAINBOW_MOOD #define RGBLIGHT_EFFECT_RAINBOW_SWIRL diff --git a/keyboards/winkeyless/bminiex/info.json b/keyboards/winkeyless/bminiex/info.json index 03a8e408b5..24d205334c 100644 --- a/keyboards/winkeyless/bminiex/info.json +++ b/keyboards/winkeyless/bminiex/info.json @@ -17,6 +17,9 @@ "pin": "D4", "levels": 5 }, + "rgblight": { + "led_count": 20 + }, "ws2812": { "driver": "i2c" }, diff --git a/keyboards/winkeys/mini_winni/config.h b/keyboards/winkeys/mini_winni/config.h index 73844a7bc7..eadcfab244 100644 --- a/keyboards/winkeys/mini_winni/config.h +++ b/keyboards/winkeys/mini_winni/config.h @@ -18,7 +18,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #pragma once -#define RGBLED_NUM 4 #define RGBLIGHT_EFFECT_BREATHING #define RGBLIGHT_EFFECT_RAINBOW_MOOD #define RGBLIGHT_EFFECT_RAINBOW_SWIRL diff --git a/keyboards/winkeys/mini_winni/info.json b/keyboards/winkeys/mini_winni/info.json index 7828dba468..139a50f320 100644 --- a/keyboards/winkeys/mini_winni/info.json +++ b/keyboards/winkeys/mini_winni/info.json @@ -15,6 +15,9 @@ ["F6", "F7", "B6", "B5"] ] }, + "rgblight": { + "led_count": 4 + }, "ws2812": { "pin": "E6" }, diff --git a/keyboards/winry/winry25tc/config.h b/keyboards/winry/winry25tc/config.h deleted file mode 100644 index 98c540c876..0000000000 --- a/keyboards/winry/winry25tc/config.h +++ /dev/null @@ -1,22 +0,0 @@ -/* Copyright 2021 Andrzej Ressel (andrzej.ressel@gmail.com) - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see <http://www.gnu.org/licenses/>. - */ - -#pragma once - -#define RGBLED_NUM 40 -#define RGBLIGHT_HUE_STEP 8 -#define RGBLIGHT_SAT_STEP 8 -#define RGBLIGHT_VAL_STEP 8 diff --git a/keyboards/winry/winry25tc/info.json b/keyboards/winry/winry25tc/info.json index 40768171e4..26329497fb 100644 --- a/keyboards/winry/winry25tc/info.json +++ b/keyboards/winry/winry25tc/info.json @@ -12,6 +12,9 @@ "pin": "D5" }, "rgblight": { + "saturation_steps": 8, + "brightness_steps": 8, + "led_count": 40, "max_brightness": 150 }, "matrix_pins": { diff --git a/keyboards/winry/winry315/config.h b/keyboards/winry/winry315/config.h index 09724a2c00..4453e273d3 100644 --- a/keyboards/winry/winry315/config.h +++ b/keyboards/winry/winry315/config.h @@ -9,18 +9,9 @@ // clang-format on -// RGB LED parameters. -// This PCB uses a single chain of WS2812-compatible addressable RGB LEDs for -// per-key backlight and underglow. -#define RGBLED_NUM 27 - // RGB Lighting configuration. This mode is used by the vendor firmware, and // can be chosen if the full RGB Matrix support is not desired for some reason. #ifdef RGBLIGHT_ENABLE -# define RGBLIGHT_HUE_STEP 8 -# define RGBLIGHT_SAT_STEP 8 -# define RGBLIGHT_VAL_STEP 8 -# define RGBLIGHT_SLEEP # define RGBLIGHT_EFFECT_BREATHING # define RGBLIGHT_EFFECT_RAINBOW_MOOD # define RGBLIGHT_EFFECT_RAINBOW_SWIRL @@ -34,7 +25,7 @@ // RGB Matrix configuration. #ifdef RGB_MATRIX_ENABLE -# define RGB_MATRIX_LED_COUNT RGBLED_NUM +# define RGB_MATRIX_LED_COUNT 27 # define RGB_MATRIX_MAXIMUM_BRIGHTNESS 150 # define RGB_MATRIX_CENTER \ diff --git a/keyboards/winry/winry315/info.json b/keyboards/winry/winry315/info.json index cfd52d368a..2c98f3bd53 100644 --- a/keyboards/winry/winry315/info.json +++ b/keyboards/winry/winry315/info.json @@ -12,7 +12,11 @@ "driver": "WS2812" }, "rgblight": { - "max_brightness": 150 + "saturation_steps": 8, + "brightness_steps": 8, + "led_count": 27, + "max_brightness": 150, + "sleep": true }, "encoder": { "rotary": [ diff --git a/keyboards/winry/winry315/keymaps/via/encoder_actions.c b/keyboards/winry/winry315/keymaps/via/encoder_actions.c deleted file mode 100644 index d24d13bb26..0000000000 --- a/keyboards/winry/winry315/keymaps/via/encoder_actions.c +++ /dev/null @@ -1,80 +0,0 @@ -/* Copyright 2020 Neil Brian Ramirez - * Copyright 2021 drashna jael're (@drashna) - * Copyright 2022 Sergey Vlasov (@sigprof) - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 3 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see <http://www.gnu.org/licenses/>. - */ - -#include "encoder_actions.h" - -#if defined(VIA_ENABLE) && defined(ENCODER_ENABLE) - -# ifndef ENCODER_TAP_DURATION_MS -# define ENCODER_TAP_DURATION_MS 10 -# endif - -# define ENCODER_STATE_CW 0x01 -# define ENCODER_STATE_CCW 0x02 - -static uint8_t encoder_state[NUM_ENCODERS] = {0}; -static uint16_t encoder_timer[NUM_ENCODERS] = {0}; -static keypos_t encoder_cw[NUM_ENCODERS] = ENCODERS_CW_KEY; -static keypos_t encoder_ccw[NUM_ENCODERS] = ENCODERS_CCW_KEY; - -static void exec_encoder_action(uint8_t index, bool clockwise, bool pressed) { - // clang-format off - keyevent_t encoder_event = (keyevent_t) { - .key = clockwise ? encoder_cw[index] : encoder_ccw[index], - .pressed = pressed, - .time = timer_read(), - .type = KEY_EVENT - }; - // clang-format on - action_exec(encoder_event); -} - -void encoder_action_unregister(void) { - for (int index = 0; index < NUM_ENCODERS; ++index) { - if (encoder_state[index] && (timer_elapsed(encoder_timer[index]) >= ENCODER_TAP_DURATION_MS)) { - bool clockwise = !!(encoder_state[index] & ENCODER_STATE_CW); - encoder_state[index] = 0; - exec_encoder_action(index, clockwise, false); - } - } -} - -void encoder_action_register(uint8_t index, bool clockwise) { - if (encoder_state[index]) { - bool was_clockwise = !!(encoder_state[index] & ENCODER_STATE_CW); - encoder_state[index] = 0; - exec_encoder_action(index, was_clockwise, false); - } - encoder_state[index] = clockwise ? ENCODER_STATE_CW : ENCODER_STATE_CCW; - encoder_timer[index] = timer_read(); - exec_encoder_action(index, clockwise, true); -} - -void matrix_scan_kb(void) { - encoder_action_unregister(); - matrix_scan_user(); -} - -bool encoder_update_kb(uint8_t index, bool clockwise) { - encoder_action_register(index, clockwise); - // don't return user actions, because they are in the keymap - // encoder_update_user(index, clockwise); - return true; -}; - -#endif diff --git a/keyboards/winry/winry315/keymaps/via/encoder_actions.h b/keyboards/winry/winry315/keymaps/via/encoder_actions.h deleted file mode 100644 index 2484af52ae..0000000000 --- a/keyboards/winry/winry315/keymaps/via/encoder_actions.h +++ /dev/null @@ -1,21 +0,0 @@ -/* Copyright 2020 Neil Brian Ramirez - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 3 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see <http://www.gnu.org/licenses/>. - */ - -#include "quantum.h" - -void encoder_action_unregister(void); - -void encoder_action_register(uint8_t index, bool clockwise); diff --git a/keyboards/winry/winry315/keymaps/via/keymap.c b/keyboards/winry/winry315/keymaps/via/keymap.c index 67598ac337..0641fbfd03 100644 --- a/keyboards/winry/winry315/keymaps/via/keymap.c +++ b/keyboards/winry/winry315/keymaps/via/keymap.c @@ -5,36 +5,23 @@ // clang-format off -#define LAYOUT_via( \ - k17, k15, k16, \ - k23,k22, k19,k18, k21,k20, \ - k00, k01, k02, k03, k04, \ - k05, k06, k07, k08, k09, \ - k10, k11, k12, k13, k14 \ -) { \ - { k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k20, k21, k22, k23 } \ -} - #define U_LTESC LT(1, KC_ESC) const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { - [0] = LAYOUT_via( + [0] = LAYOUT_top( KC_HOME, KC_MUTE, KC_MPLY, - KC_PGUP, KC_PGDN, KC_VOLD, KC_VOLU, KC_MPRV, KC_MNXT, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, U_LTESC, KC_TAB, KC_SPC, KC_BSPC, KC_ENT ), - [1] = LAYOUT_via( + [1] = LAYOUT_top( RGB_M_P, RGB_M_B, RGB_M_R, - RGB_HUD, RGB_HUI, RGB_SAD, RGB_SAI, RGB_VAD, RGB_VAI, RGB_MOD, RGB_HUI, RGB_SAI, RGB_VAI, RGB_SPI, RGB_RMOD,RGB_HUD, RGB_SAD, RGB_VAD, RGB_SPD, KC_TRNS, RGB_TOG, RGB_M_P, RGB_M_B, RGB_M_R ), - [2 ... 7] = LAYOUT_via( + [2 ... 7] = LAYOUT_top( KC_TRNS, KC_TRNS, KC_TRNS, - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS @@ -42,3 +29,11 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { }; // clang-format on + +#ifdef ENCODER_MAP_ENABLE +const uint16_t PROGMEM encoder_map[][NUM_ENCODERS][NUM_DIRECTIONS] = { + [0] = { ENCODER_CCW_CW(KC_PGUP, KC_PGDN), ENCODER_CCW_CW(KC_VOLD, KC_VOLU), ENCODER_CCW_CW(KC_MPRV, KC_MNXT) }, + [1] = { ENCODER_CCW_CW(RGB_HUD, RGB_HUI), ENCODER_CCW_CW(RGB_SAD, RGB_SAI), ENCODER_CCW_CW(RGB_VAD, RGB_VAI) }, + [2 ... 7] = { ENCODER_CCW_CW(_______, _______), ENCODER_CCW_CW(_______, _______), ENCODER_CCW_CW(_______, _______) } +}; +#endif diff --git a/keyboards/winry/winry315/keymaps/via/rules.mk b/keyboards/winry/winry315/keymaps/via/rules.mk index 6098ef3ad8..1189f4ad19 100644 --- a/keyboards/winry/winry315/keymaps/via/rules.mk +++ b/keyboards/winry/winry315/keymaps/via/rules.mk @@ -1,4 +1,3 @@ VIA_ENABLE = yes LTO_ENABLE = yes - -SRC += encoder_actions.c +ENCODER_MAP_ENABLE = yes diff --git a/keyboards/wolf/ts60/config.h b/keyboards/wolf/ts60/config.h index 5064157a52..1bc729f909 100644 --- a/keyboards/wolf/ts60/config.h +++ b/keyboards/wolf/ts60/config.h @@ -18,7 +18,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #pragma once /* Define RGB Underglow */ -#define RGBLED_NUM 16 #define RGBLIGHT_EFFECT_BREATHING #define RGBLIGHT_EFFECT_RAINBOW_MOOD #define RGBLIGHT_EFFECT_RAINBOW_SWIRL @@ -29,7 +28,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #define RGBLIGHT_EFFECT_RGB_TEST #define RGBLIGHT_EFFECT_ALTERNATING #define RGBLIGHT_EFFECT_TWINKLE -#define RGBLIGHT_SLEEP #define RGBLIGHT_DEFAULT_MODE RGBLIGHT_MODE_RAINBOW_SWIRL #define BACKLIGHT_DEFAULT_LEVEL 6 diff --git a/keyboards/wolf/ts60/info.json b/keyboards/wolf/ts60/info.json index d1337177b4..3719cb3bf7 100644 --- a/keyboards/wolf/ts60/info.json +++ b/keyboards/wolf/ts60/info.json @@ -17,6 +17,10 @@ "pin": "B7", "levels": 6 }, + "rgblight": { + "led_count": 16, + "sleep": true + }, "ws2812": { "pin": "D0" }, diff --git a/keyboards/wolfmarkclub/wm1/config.h b/keyboards/wolfmarkclub/wm1/config.h index 8df536bf54..4184f7de3f 100644 --- a/keyboards/wolfmarkclub/wm1/config.h +++ b/keyboards/wolfmarkclub/wm1/config.h @@ -17,7 +17,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #pragma once -#define RGBLED_NUM 18 #define RGBLIGHT_EFFECT_BREATHING #define RGBLIGHT_EFFECT_RAINBOW_MOOD #define RGBLIGHT_EFFECT_RAINBOW_SWIRL @@ -28,10 +27,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #define RGBLIGHT_EFFECT_RGB_TEST #define RGBLIGHT_EFFECT_ALTERNATING #define RGBLIGHT_EFFECT_TWINKLE -#define RGBLIGHT_HUE_STEP 8 -#define RGBLIGHT_SAT_STEP 8 -#define RGBLIGHT_VAL_STEP 8 -#define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */ /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ #define LOCKING_SUPPORT_ENABLE diff --git a/keyboards/wolfmarkclub/wm1/info.json b/keyboards/wolfmarkclub/wm1/info.json index 099327f417..479f680cf7 100644 --- a/keyboards/wolfmarkclub/wm1/info.json +++ b/keyboards/wolfmarkclub/wm1/info.json @@ -8,6 +8,12 @@ "pid": "0x2B29", "device_version": "0.0.1" }, + "rgblight": { + "saturation_steps": 8, + "brightness_steps": 8, + "led_count": 18, + "sleep": true + }, "ws2812": { "pin": "A3" }, diff --git a/keyboards/wolfmarkclub/wm1/rules.mk b/keyboards/wolfmarkclub/wm1/rules.mk index a712747048..512ef119fd 100644 --- a/keyboards/wolfmarkclub/wm1/rules.mk +++ b/keyboards/wolfmarkclub/wm1/rules.mk @@ -25,5 +25,3 @@ AUDIO_ENABLE = no # Audio output SLEEP_LED_ENABLE = yes LTO_ENABLE = yes -# Enter lower-power sleep mode when on the ChibiOS idle thread -OPT_DEFS += -DCORTEX_ENABLE_WFI_IDLE=TRUE diff --git a/keyboards/woodkeys/bigseries/1key/config.h b/keyboards/woodkeys/bigseries/1key/config.h index d81dd8611b..1c7d931f6c 100755 --- a/keyboards/woodkeys/bigseries/1key/config.h +++ b/keyboards/woodkeys/bigseries/1key/config.h @@ -33,5 +33,4 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #define RGBLIGHT_EFFECT_RGB_TEST #define RGBLIGHT_EFFECT_ALTERNATING #define RGBLIGHT_EFFECT_TWINKLE -#define RGBLED_NUM 5 #endif diff --git a/keyboards/woodkeys/bigseries/1key/info.json b/keyboards/woodkeys/bigseries/1key/info.json index 1dd1e6fa0c..9eb49434d9 100644 --- a/keyboards/woodkeys/bigseries/1key/info.json +++ b/keyboards/woodkeys/bigseries/1key/info.json @@ -12,6 +12,7 @@ "pin": "D3" }, "rgblight": { + "led_count": 5, "max_brightness": 128 }, "matrix_pins": { diff --git a/keyboards/woodkeys/bigseries/1key/keymaps/8ball/keymap.c b/keyboards/woodkeys/bigseries/1key/keymaps/8ball/keymap.c index 500fddd53f..b72b1a0d9a 100755 --- a/keyboards/woodkeys/bigseries/1key/keymaps/8ball/keymap.c +++ b/keyboards/woodkeys/bigseries/1key/keymaps/8ball/keymap.c @@ -98,40 +98,6 @@ bool process_record_user(uint16_t keycode, keyrecord_t *record) { return true; } -void led_set_user(uint8_t usb_led) { - - if (usb_led & (1 << USB_LED_NUM_LOCK)) { - - } else { - - } - - if (usb_led & (1 << USB_LED_CAPS_LOCK)) { - - } else { - - } - - if (usb_led & (1 << USB_LED_SCROLL_LOCK)) { - - } else { - - } - - if (usb_led & (1 << USB_LED_COMPOSE)) { - - } else { - - } - - if (usb_led & (1 << USB_LED_KANA)) { - - } else { - - } - -} - void reset_rgb(void) { // This gets called on init and after the timeout for the answer color // If you want to change the default color/mode, do it here diff --git a/keyboards/woodkeys/bigseries/1key/keymaps/ctrl-alt-del/keymap.c b/keyboards/woodkeys/bigseries/1key/keymaps/ctrl-alt-del/keymap.c index d87471b007..4cc698b1df 100755 --- a/keyboards/woodkeys/bigseries/1key/keymaps/ctrl-alt-del/keymap.c +++ b/keyboards/woodkeys/bigseries/1key/keymaps/ctrl-alt-del/keymap.c @@ -42,46 +42,3 @@ void matrix_init_user(void) { initialized = 1; } } - -void matrix_scan_user(void) { -} - -bool process_record_user(uint16_t keycode, keyrecord_t *record) { - switch (keycode) { - } - return true; -} - -void led_set_user(uint8_t usb_led) { - - if (usb_led & (1 << USB_LED_NUM_LOCK)) { - - } else { - - } - - if (usb_led & (1 << USB_LED_CAPS_LOCK)) { - - } else { - - } - - if (usb_led & (1 << USB_LED_SCROLL_LOCK)) { - - } else { - - } - - if (usb_led & (1 << USB_LED_COMPOSE)) { - - } else { - - } - - if (usb_led & (1 << USB_LED_KANA)) { - - } else { - - } - -} diff --git a/keyboards/woodkeys/bigseries/1key/keymaps/lock/keymap.c b/keyboards/woodkeys/bigseries/1key/keymaps/lock/keymap.c index 650554e020..dbdd5a8e3c 100755 --- a/keyboards/woodkeys/bigseries/1key/keymaps/lock/keymap.c +++ b/keyboards/woodkeys/bigseries/1key/keymaps/lock/keymap.c @@ -41,44 +41,3 @@ void matrix_init_user(void) { initialized = 1; } } - -void matrix_scan_user(void) { -} - -bool process_record_user(uint16_t keycode, keyrecord_t *record) { - return true; -} - -void led_set_user(uint8_t usb_led) { - - if (usb_led & (1 << USB_LED_NUM_LOCK)) { - - } else { - - } - - if (usb_led & (1 << USB_LED_CAPS_LOCK)) { - - } else { - - } - - if (usb_led & (1 << USB_LED_SCROLL_LOCK)) { - - } else { - - } - - if (usb_led & (1 << USB_LED_COMPOSE)) { - - } else { - - } - - if (usb_led & (1 << USB_LED_KANA)) { - - } else { - - } - -} diff --git a/keyboards/woodkeys/bigseries/2key/config.h b/keyboards/woodkeys/bigseries/2key/config.h index ecb5649419..1c7d931f6c 100755 --- a/keyboards/woodkeys/bigseries/2key/config.h +++ b/keyboards/woodkeys/bigseries/2key/config.h @@ -33,5 +33,4 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #define RGBLIGHT_EFFECT_RGB_TEST #define RGBLIGHT_EFFECT_ALTERNATING #define RGBLIGHT_EFFECT_TWINKLE -#define RGBLED_NUM 8 #endif diff --git a/keyboards/woodkeys/bigseries/2key/info.json b/keyboards/woodkeys/bigseries/2key/info.json index a488fc1515..5d1b49144b 100644 --- a/keyboards/woodkeys/bigseries/2key/info.json +++ b/keyboards/woodkeys/bigseries/2key/info.json @@ -12,6 +12,7 @@ "pin": "D3" }, "rgblight": { + "led_count": 8, "max_brightness": 128 }, "matrix_pins": { diff --git a/keyboards/woodkeys/bigseries/3key/config.h b/keyboards/woodkeys/bigseries/3key/config.h index a225c19d3a..1c7d931f6c 100755 --- a/keyboards/woodkeys/bigseries/3key/config.h +++ b/keyboards/woodkeys/bigseries/3key/config.h @@ -33,5 +33,4 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #define RGBLIGHT_EFFECT_RGB_TEST #define RGBLIGHT_EFFECT_ALTERNATING #define RGBLIGHT_EFFECT_TWINKLE -#define RGBLED_NUM 11 #endif diff --git a/keyboards/woodkeys/bigseries/3key/info.json b/keyboards/woodkeys/bigseries/3key/info.json index 0152a2ce04..a11ed9217f 100644 --- a/keyboards/woodkeys/bigseries/3key/info.json +++ b/keyboards/woodkeys/bigseries/3key/info.json @@ -12,6 +12,7 @@ "pin": "D3" }, "rgblight": { + "led_count": 11, "max_brightness": 128 }, "matrix_pins": { diff --git a/keyboards/woodkeys/bigseries/3key/keymaps/ctrl-alt-del/keymap.c b/keyboards/woodkeys/bigseries/3key/keymaps/ctrl-alt-del/keymap.c index d1410ecf1e..d97c057c6f 100755 --- a/keyboards/woodkeys/bigseries/3key/keymaps/ctrl-alt-del/keymap.c +++ b/keyboards/woodkeys/bigseries/3key/keymaps/ctrl-alt-del/keymap.c @@ -42,46 +42,3 @@ void matrix_init_user(void) { initialized = 1; } } - -void matrix_scan_user(void) { -} - -bool process_record_user(uint16_t keycode, keyrecord_t *record) { - switch (keycode) { - } - return true; -} - -void led_set_user(uint8_t usb_led) { - - if (usb_led & (1 << USB_LED_NUM_LOCK)) { - - } else { - - } - - if (usb_led & (1 << USB_LED_CAPS_LOCK)) { - - } else { - - } - - if (usb_led & (1 << USB_LED_SCROLL_LOCK)) { - - } else { - - } - - if (usb_led & (1 << USB_LED_COMPOSE)) { - - } else { - - } - - if (usb_led & (1 << USB_LED_KANA)) { - - } else { - - } - -} diff --git a/keyboards/woodkeys/bigseries/4key/config.h b/keyboards/woodkeys/bigseries/4key/config.h index 02ed67b9cb..1c7d931f6c 100755 --- a/keyboards/woodkeys/bigseries/4key/config.h +++ b/keyboards/woodkeys/bigseries/4key/config.h @@ -33,5 +33,4 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #define RGBLIGHT_EFFECT_RGB_TEST #define RGBLIGHT_EFFECT_ALTERNATING #define RGBLIGHT_EFFECT_TWINKLE -#define RGBLED_NUM 12 #endif diff --git a/keyboards/woodkeys/bigseries/4key/info.json b/keyboards/woodkeys/bigseries/4key/info.json index e228efd54c..ee77da7eb8 100644 --- a/keyboards/woodkeys/bigseries/4key/info.json +++ b/keyboards/woodkeys/bigseries/4key/info.json @@ -12,6 +12,7 @@ "pin": "D3" }, "rgblight": { + "led_count": 12, "max_brightness": 128 }, "matrix_pins": { diff --git a/keyboards/woodkeys/meira/config.h b/keyboards/woodkeys/meira/config.h index d5bdf9540c..4b3491cfa1 100644 --- a/keyboards/woodkeys/meira/config.h +++ b/keyboards/woodkeys/meira/config.h @@ -22,11 +22,4 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #define MATRIX_ROWS 4 #define MATRIX_COLS 12 -/* COL2ROW, ROW2COL*/ -//#define DIODE_DIRECTION - #define BACKLIGHT_PWM_MAP {2, 4, 8, 16, 40, 55, 70, 128, 200, 255} - -#ifdef RGBLIGHT_ENABLE -#define RGBLED_NUM 15 // Number of LEDs -#endif diff --git a/keyboards/woodkeys/meira/info.json b/keyboards/woodkeys/meira/info.json index e39df58323..5905c00d2d 100644 --- a/keyboards/woodkeys/meira/info.json +++ b/keyboards/woodkeys/meira/info.json @@ -12,6 +12,9 @@ "driver": "custom", "levels": 10 }, + "rgblight": { + "led_count": 15 + }, "ws2812": { "pin": "D3" }, diff --git a/keyboards/woodkeys/meira/keymaps/cole/config.h b/keyboards/woodkeys/meira/keymaps/cole/config.h index 90c490e836..1dd4c39f25 100644 --- a/keyboards/woodkeys/meira/keymaps/cole/config.h +++ b/keyboards/woodkeys/meira/keymaps/cole/config.h @@ -14,10 +14,7 @@ * along with this program. If not, see <http://www.gnu.org/licenses/>. */ -#ifndef CONFIG_USER_H -#define CONFIG_USER_H - -#include "../../config.h" +#pragma once // place overrides here #define MUSIC_MASK (keycode != KC_NO) @@ -27,5 +24,3 @@ #define NO_MUSIC_MODE #endif - -#endif diff --git a/keyboards/woodkeys/meira/keymaps/cole/keymap.c b/keyboards/woodkeys/meira/keymaps/cole/keymap.c index 365c9d18e5..b85da25a28 100644 --- a/keyboards/woodkeys/meira/keymaps/cole/keymap.c +++ b/keyboards/woodkeys/meira/keymaps/cole/keymap.c @@ -26,7 +26,7 @@ extern rgblight_config_t rgblight_config; #define _DVORAK 2 #define _LOWER 3 #define _RAISE 4 -#define _ADJUST 16 +#define _ADJUST 5 enum custom_keycodes { QWERTY = SAFE_RANGE, @@ -214,7 +214,3 @@ bool process_record_user(uint16_t keycode, keyrecord_t *record) { } return true; } - -void led_set_user(uint8_t usb_led) { - -} diff --git a/keyboards/woodkeys/meira/keymaps/grahampheath/config.h b/keyboards/woodkeys/meira/keymaps/grahampheath/config.h index 604f378461..638ebffb8c 100644 --- a/keyboards/woodkeys/meira/keymaps/grahampheath/config.h +++ b/keyboards/woodkeys/meira/keymaps/grahampheath/config.h @@ -14,15 +14,13 @@ * along with this program. If not, see <http://www.gnu.org/licenses/>. */ -#ifndef CONFIG_USER_H -#define CONFIG_USER_H - -#include "../../config.h" +#pragma once // place overrides here #define MUSIC_MASK (keycode != KC_NO) -#define AUDIO_PIN C6 #ifdef AUDIO_ENABLE +#undef AUDIO_PIN +#define AUDIO_PIN C6 #define STARTUP_SONG SONG(PLANCK_SOUND) // #define STARTUP_SONG SONG(NO_SOUND) @@ -31,5 +29,3 @@ SONG(DVORAK_SOUND) \ } #endif - -#endif diff --git a/keyboards/woodkeys/meira/keymaps/grahampheath/keymap.c b/keyboards/woodkeys/meira/keymaps/grahampheath/keymap.c index aa9730b88f..8057bcf2b4 100644 --- a/keyboards/woodkeys/meira/keymaps/grahampheath/keymap.c +++ b/keyboards/woodkeys/meira/keymaps/grahampheath/keymap.c @@ -26,7 +26,7 @@ extern rgblight_config_t rgblight_config; #define _LOWER 3 #define _RAISE 4 #define _EMOJI 5 -#define _ADJUST 16 +#define _ADJUST 6 enum custom_keycodes { QWERTY = SAFE_RANGE, @@ -391,6 +391,3 @@ bool process_record_user(uint16_t keycode, keyrecord_t *record) { return true; } -void led_set_user(uint8_t usb_led) { - -} diff --git a/keyboards/woodkeys/meira/keymaps/takmiya/config.h b/keyboards/woodkeys/meira/keymaps/takmiya/config.h deleted file mode 100644 index 97210115b9..0000000000 --- a/keyboards/woodkeys/meira/keymaps/takmiya/config.h +++ /dev/null @@ -1,24 +0,0 @@ -/* Copyright 2017 Cole Markham, WoodKeys.click - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see <http://www.gnu.org/licenses/>. - */ - -#ifndef CONFIG_USER_H -#define CONFIG_USER_H - -#include "../../config.h" - -// place overrides here - -#endif diff --git a/keyboards/woodkeys/meira/keymaps/takmiya/keymap.c b/keyboards/woodkeys/meira/keymaps/takmiya/keymap.c index ddd695461e..8e3c41c332 100644 --- a/keyboards/woodkeys/meira/keymaps/takmiya/keymap.c +++ b/keyboards/woodkeys/meira/keymaps/takmiya/keymap.c @@ -24,7 +24,7 @@ extern rgblight_config_t rgblight_config; #define _QWERTY 0 #define _LOWER 1 #define _RAISE 2 -#define _ADJUST 16 +#define _ADJUST 3 enum custom_keycodes { QWERTY = SAFE_RANGE, @@ -227,7 +227,3 @@ bool process_record_user(uint16_t keycode, keyrecord_t *record) { } return true; } - -void led_set_user(uint8_t usb_led) { - -} diff --git a/keyboards/woodkeys/scarletbandana/config.h b/keyboards/woodkeys/scarletbandana/config.h index 3854dc8659..45b5100891 100644 --- a/keyboards/woodkeys/scarletbandana/config.h +++ b/keyboards/woodkeys/scarletbandana/config.h @@ -28,7 +28,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #define RGBLIGHT_EFFECT_RGB_TEST #define RGBLIGHT_EFFECT_ALTERNATING #define RGBLIGHT_EFFECT_TWINKLE -#define RGBLED_NUM 8 // Number of LEDs #endif #ifdef AUDIO_ENABLE diff --git a/keyboards/woodkeys/scarletbandana/info.json b/keyboards/woodkeys/scarletbandana/info.json index d74555a178..49177ea718 100644 --- a/keyboards/woodkeys/scarletbandana/info.json +++ b/keyboards/woodkeys/scarletbandana/info.json @@ -8,6 +8,9 @@ "pid": "0x6969", "device_version": "0.0.1" }, + "rgblight": { + "led_count": 8 + }, "ws2812": { "pin": "D3" }, diff --git a/keyboards/work_louder/loop/config.h b/keyboards/work_louder/loop/config.h index cf25b4b5b7..8a2548341a 100644 --- a/keyboards/work_louder/loop/config.h +++ b/keyboards/work_louder/loop/config.h @@ -18,10 +18,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #pragma once #define RGBLIGHT_DI_PIN E6 -//# define RGBLIGHT_HUE_STEP 8 -//# define RGBLIGHT_SAT_STEP 8 -//# define RGBLIGHT_VAL_STEP 8 -#define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */ /*== or choose animations ==*/ #define RGBLIGHT_EFFECT_BREATHING #define RGBLIGHT_EFFECT_RAINBOW_MOOD diff --git a/keyboards/work_louder/loop/info.json b/keyboards/work_louder/loop/info.json index 966f0a6b02..458066fc15 100644 --- a/keyboards/work_louder/loop/info.json +++ b/keyboards/work_louder/loop/info.json @@ -30,7 +30,8 @@ "pin": "F1" }, "rgblight": { - "max_brightness": 120 + "max_brightness": 120, + "sleep": true }, "processor": "atmega32u4", "bootloader": "atmel-dfu", diff --git a/keyboards/work_louder/loop/rev1/config.h b/keyboards/work_louder/loop/rev1/config.h deleted file mode 100644 index 1bc02d08a6..0000000000 --- a/keyboards/work_louder/loop/rev1/config.h +++ /dev/null @@ -1,6 +0,0 @@ -// Copyright 2021 Christopher Courtney, aka Drashna Jael're (@drashna) <drashna@live.com> -// SPDX-License-Identifier: GPL-2.0-or-later - -#pragma once - -# define RGBLED_NUM 24 diff --git a/keyboards/work_louder/loop/rev1/info.json b/keyboards/work_louder/loop/rev1/info.json index 90ac25f360..3caea9b338 100644 --- a/keyboards/work_louder/loop/rev1/info.json +++ b/keyboards/work_louder/loop/rev1/info.json @@ -1,5 +1,8 @@ { "usb": { "device_version": "0.0.1" + }, + "rgblight": { + "led_count": 24 } } diff --git a/keyboards/work_louder/loop/rev3/config.h b/keyboards/work_louder/loop/rev3/config.h deleted file mode 100644 index 5451d4466e..0000000000 --- a/keyboards/work_louder/loop/rev3/config.h +++ /dev/null @@ -1,6 +0,0 @@ -// Copyright 2021 Christopher Courtney, aka Drashna Jael're (@drashna) <drashna@live.com> -// SPDX-License-Identifier: GPL-2.0-or-later - -#pragma once - -#define RGBLED_NUM 11 diff --git a/keyboards/work_louder/loop/rev3/info.json b/keyboards/work_louder/loop/rev3/info.json index b377cdff00..603bca5c6a 100644 --- a/keyboards/work_louder/loop/rev3/info.json +++ b/keyboards/work_louder/loop/rev3/info.json @@ -1,5 +1,8 @@ { "usb": { "device_version": "0.0.3" + }, + "rgblight": { + "led_count": 11 } } diff --git a/keyboards/work_louder/micro/config.h b/keyboards/work_louder/micro/config.h index 234b1de602..98f2b86973 100644 --- a/keyboards/work_louder/micro/config.h +++ b/keyboards/work_louder/micro/config.h @@ -12,7 +12,6 @@ // #define RGB_MATRIX_KEYPRESSES #define RGBLIGHT_DI_PIN D2 -#define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */ #define RGBLIGHT_DEFAULT_MODE RGBLIGHT_MODE_STATIC_GRADIENT + 9 #define RGBLIGHT_DEFAULT_HUE 213 diff --git a/keyboards/work_louder/micro/info.json b/keyboards/work_louder/micro/info.json index 6b14ecfbe7..d003fcad38 100644 --- a/keyboards/work_louder/micro/info.json +++ b/keyboards/work_louder/micro/info.json @@ -37,7 +37,8 @@ "hue_steps": 8, "led_count": 8, "max_brightness": 150, - "saturation_steps": 8 + "saturation_steps": 8, + "sleep": true }, "ws2812": { "pin": "D1" diff --git a/keyboards/work_louder/nano/config.h b/keyboards/work_louder/nano/config.h index 593304a053..525bb3fda7 100644 --- a/keyboards/work_louder/nano/config.h +++ b/keyboards/work_louder/nano/config.h @@ -18,11 +18,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #pragma once #define RGBLIGHT_DI_PIN C7 -#define RGBLED_NUM 6 -//# define RGBLIGHT_HUE_STEP 8 -//# define RGBLIGHT_SAT_STEP 8 -//# define RGBLIGHT_VAL_STEP 8 -#define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */ /*== or choose animations ==*/ #define RGBLIGHT_EFFECT_BREATHING #define RGBLIGHT_EFFECT_RAINBOW_MOOD diff --git a/keyboards/work_louder/nano/info.json b/keyboards/work_louder/nano/info.json index adc32d10a6..5b95e7d2aa 100644 --- a/keyboards/work_louder/nano/info.json +++ b/keyboards/work_louder/nano/info.json @@ -26,7 +26,9 @@ "pin": "F6" }, "rgblight": { - "max_brightness": 120 + "led_count": 6, + "max_brightness": 120, + "sleep": true }, "bootmagic": { "matrix": [0, 2] diff --git a/keyboards/work_louder/work_board/config.h b/keyboards/work_louder/work_board/config.h index 56615c8e49..6a6d757b70 100644 --- a/keyboards/work_louder/work_board/config.h +++ b/keyboards/work_louder/work_board/config.h @@ -18,10 +18,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #pragma once #define RGBLIGHT_DI_PIN D2 -//# define RGBLIGHT_HUE_STEP 8 -//# define RGBLIGHT_SAT_STEP 8 -//# define RGBLIGHT_VAL_STEP 8 -#define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */ /*== or choose animations ==*/ #define RGBLIGHT_EFFECT_BREATHING #define RGBLIGHT_EFFECT_RAINBOW_MOOD diff --git a/keyboards/work_louder/work_board/info.json b/keyboards/work_louder/work_board/info.json index 067a2b292e..99ddfd5e65 100644 --- a/keyboards/work_louder/work_board/info.json +++ b/keyboards/work_louder/work_board/info.json @@ -25,7 +25,8 @@ "pin": "D1" }, "rgblight": { - "max_brightness": 120 + "max_brightness": 120, + "sleep": true }, "processor": "atmega32u4", "bootloader": "atmel-dfu", diff --git a/keyboards/work_louder/work_board/keymaps/drashna/keymap.c b/keyboards/work_louder/work_board/keymaps/drashna/keymap.c index 1747ab638e..2c20225742 100644 --- a/keyboards/work_louder/work_board/keymaps/drashna/keymap.c +++ b/keyboards/work_louder/work_board/keymaps/drashna/keymap.c @@ -110,7 +110,7 @@ const uint16_t PROGMEM encoder_map[][NUM_ENCODERS][NUM_DIRECTIONS] = { bool rgb_matrix_indicators_advanced_keymap(uint8_t led_min, uint8_t led_max) { uint8_t this_mod = get_mods(); - uint8_t this_led = host_keyboard_leds(); + led_t this_led = host_keyboard_led_state(); uint8_t this_osm = get_oneshot_mods(); #define THUMB_LED 6 #define RGB_MATRIX_INDICATOR_SET_COLOR_wrapper(...) RGB_MATRIX_INDICATOR_SET_COLOR(__VA_ARGS__) @@ -134,7 +134,7 @@ bool rgb_matrix_indicators_advanced_keymap(uint8_t led_min, uint8_t led_max) { } } - if ((this_mod | this_osm) & MOD_MASK_SHIFT || this_led & (1 << USB_LED_CAPS_LOCK)) { + if ((this_mod | this_osm) & MOD_MASK_SHIFT || this_led.caps_lock) { if (!layer_state_is(_ADJUST)) { RGB_MATRIX_INDICATOR_SET_COLOR(12, 0x00, 0xFF, 0x00); RGB_MATRIX_INDICATOR_SET_COLOR(13, 0x00, 0xFF, 0x00); diff --git a/keyboards/work_louder/work_board/rev1/config.h b/keyboards/work_louder/work_board/rev1/config.h deleted file mode 100644 index b7d85d490d..0000000000 --- a/keyboards/work_louder/work_board/rev1/config.h +++ /dev/null @@ -1,6 +0,0 @@ -// Copyright 2021 Christopher Courtney, aka Drashna Jael're (@drashna) <drashna@live.com> -// SPDX-License-Identifier: GPL-2.0-or-later - -#pragma once - -# define RGBLED_NUM 26 diff --git a/keyboards/work_louder/work_board/rev1/info.json b/keyboards/work_louder/work_board/rev1/info.json index 90ac25f360..9884ca6e48 100644 --- a/keyboards/work_louder/work_board/rev1/info.json +++ b/keyboards/work_louder/work_board/rev1/info.json @@ -1,5 +1,8 @@ { "usb": { "device_version": "0.0.1" + }, + "rgblight": { + "led_count": 26 } } diff --git a/keyboards/work_louder/work_board/rev3/config.h b/keyboards/work_louder/work_board/rev3/config.h deleted file mode 100644 index 8e3cd8bce8..0000000000 --- a/keyboards/work_louder/work_board/rev3/config.h +++ /dev/null @@ -1,6 +0,0 @@ -// Copyright 2021 Christopher Courtney, aka Drashna Jael're (@drashna) <drashna@live.com> -// SPDX-License-Identifier: GPL-2.0-or-later - -#pragma once - -#define RGBLED_NUM 19 diff --git a/keyboards/work_louder/work_board/rev3/info.json b/keyboards/work_louder/work_board/rev3/info.json index b377cdff00..63e757dfe2 100644 --- a/keyboards/work_louder/work_board/rev3/info.json +++ b/keyboards/work_louder/work_board/rev3/info.json @@ -1,5 +1,8 @@ { "usb": { "device_version": "0.0.3" + }, + "rgblight": { + "led_count": 19 } } diff --git a/keyboards/wsk/alpha9/config.h b/keyboards/wsk/alpha9/config.h index defc0a92dc..9d803ecd10 100644 --- a/keyboards/wsk/alpha9/config.h +++ b/keyboards/wsk/alpha9/config.h @@ -32,7 +32,3 @@ # define RGBLIGHT_EFFECT_RGB_TEST # define RGBLIGHT_EFFECT_ALTERNATING # define RGBLIGHT_EFFECT_TWINKLE -# define RGBLED_NUM 5 -# define RGBLIGHT_HUE_STEP 8 -# define RGBLIGHT_SAT_STEP 8 -# define RGBLIGHT_VAL_STEP 8 diff --git a/keyboards/wsk/alpha9/info.json b/keyboards/wsk/alpha9/info.json index 0b15863059..e2edc520ec 100644 --- a/keyboards/wsk/alpha9/info.json +++ b/keyboards/wsk/alpha9/info.json @@ -17,6 +17,11 @@ "caps_lock": "D3", "on_state": 0 }, + "rgblight": { + "saturation_steps": 8, + "brightness_steps": 8, + "led_count": 5 + }, "ws2812": { "pin": "F4" }, diff --git a/keyboards/wsk/g4m3ralpha/config.h b/keyboards/wsk/g4m3ralpha/config.h index a14f9dbde2..a3080656e9 100644 --- a/keyboards/wsk/g4m3ralpha/config.h +++ b/keyboards/wsk/g4m3ralpha/config.h @@ -32,7 +32,3 @@ #define RGBLIGHT_EFFECT_RGB_TEST #define RGBLIGHT_EFFECT_ALTERNATING #define RGBLIGHT_EFFECT_TWINKLE -#define RGBLED_NUM 5 -#define RGBLIGHT_HUE_STEP 8 -#define RGBLIGHT_SAT_STEP 8 -#define RGBLIGHT_VAL_STEP 8 diff --git a/keyboards/wsk/g4m3ralpha/info.json b/keyboards/wsk/g4m3ralpha/info.json index e9c24279f3..2df7c7842a 100644 --- a/keyboards/wsk/g4m3ralpha/info.json +++ b/keyboards/wsk/g4m3ralpha/info.json @@ -8,6 +8,11 @@ "pid": "0x56D9", "device_version": "0.0.1" }, + "rgblight": { + "saturation_steps": 8, + "brightness_steps": 8, + "led_count": 5 + }, "ws2812": { "pin": "F4" }, diff --git a/keyboards/wsk/gothic50/config.h b/keyboards/wsk/gothic50/config.h index 541e19bece..00375deb60 100644 --- a/keyboards/wsk/gothic50/config.h +++ b/keyboards/wsk/gothic50/config.h @@ -10,10 +10,6 @@ #define RGBLIGHT_EFFECT_RGB_TEST #define RGBLIGHT_EFFECT_ALTERNATING #define RGBLIGHT_EFFECT_TWINKLE -#define RGBLED_NUM 10 -#define RGBLIGHT_HUE_STEP 8 -#define RGBLIGHT_SAT_STEP 8 -#define RGBLIGHT_VAL_STEP 8 /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ #define LOCKING_SUPPORT_ENABLE diff --git a/keyboards/wsk/gothic50/info.json b/keyboards/wsk/gothic50/info.json index 8cc0971879..7ab3781d39 100644 --- a/keyboards/wsk/gothic50/info.json +++ b/keyboards/wsk/gothic50/info.json @@ -8,6 +8,11 @@ "pid": "0x04EF", "device_version": "0.0.1" }, + "rgblight": { + "saturation_steps": 8, + "brightness_steps": 8, + "led_count": 10 + }, "ws2812": { "pin": "F7" }, diff --git a/keyboards/wsk/gothic70/config.h b/keyboards/wsk/gothic70/config.h index b6ee3e9cc8..f3ddb5c4d4 100644 --- a/keyboards/wsk/gothic70/config.h +++ b/keyboards/wsk/gothic70/config.h @@ -10,10 +10,6 @@ #define RGBLIGHT_EFFECT_RGB_TEST #define RGBLIGHT_EFFECT_ALTERNATING #define RGBLIGHT_EFFECT_TWINKLE -#define RGBLED_NUM 7 -#define RGBLIGHT_HUE_STEP 8 -#define RGBLIGHT_SAT_STEP 8 -#define RGBLIGHT_VAL_STEP 8 /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ #define LOCKING_SUPPORT_ENABLE diff --git a/keyboards/wsk/gothic70/info.json b/keyboards/wsk/gothic70/info.json index 06ee936ce7..87e2cc02ba 100644 --- a/keyboards/wsk/gothic70/info.json +++ b/keyboards/wsk/gothic70/info.json @@ -8,6 +8,11 @@ "pid": "0x63CC", "device_version": "0.0.1" }, + "rgblight": { + "saturation_steps": 8, + "brightness_steps": 8, + "led_count": 7 + }, "ws2812": { "pin": "F4" }, diff --git a/keyboards/wsk/kodachi50/config.h b/keyboards/wsk/kodachi50/config.h index da4d3257a6..d702489ee7 100644 --- a/keyboards/wsk/kodachi50/config.h +++ b/keyboards/wsk/kodachi50/config.h @@ -16,7 +16,3 @@ #define RGBLIGHT_EFFECT_RGB_TEST #define RGBLIGHT_EFFECT_ALTERNATING #define RGBLIGHT_EFFECT_TWINKLE -#define RGBLED_NUM 10 -#define RGBLIGHT_HUE_STEP 8 -#define RGBLIGHT_SAT_STEP 8 -#define RGBLIGHT_VAL_STEP 8 diff --git a/keyboards/wsk/kodachi50/info.json b/keyboards/wsk/kodachi50/info.json index b5d0f9459b..c7fe3ce72e 100644 --- a/keyboards/wsk/kodachi50/info.json +++ b/keyboards/wsk/kodachi50/info.json @@ -8,6 +8,11 @@ "pid": "0x72D4", "device_version": "0.0.1" }, + "rgblight": { + "saturation_steps": 8, + "brightness_steps": 8, + "led_count": 10 + }, "ws2812": { "pin": "D3" }, diff --git a/keyboards/wsk/pain27/config.h b/keyboards/wsk/pain27/config.h index edc623d08f..d702489ee7 100644 --- a/keyboards/wsk/pain27/config.h +++ b/keyboards/wsk/pain27/config.h @@ -16,7 +16,3 @@ #define RGBLIGHT_EFFECT_RGB_TEST #define RGBLIGHT_EFFECT_ALTERNATING #define RGBLIGHT_EFFECT_TWINKLE -#define RGBLED_NUM 8 -#define RGBLIGHT_HUE_STEP 8 -#define RGBLIGHT_SAT_STEP 8 -#define RGBLIGHT_VAL_STEP 8 diff --git a/keyboards/wsk/pain27/info.json b/keyboards/wsk/pain27/info.json index f542c999a1..17ac3a16ee 100644 --- a/keyboards/wsk/pain27/info.json +++ b/keyboards/wsk/pain27/info.json @@ -8,6 +8,11 @@ "pid": "0x9E8C", "device_version": "0.0.1" }, + "rgblight": { + "saturation_steps": 8, + "brightness_steps": 8, + "led_count": 8 + }, "ws2812": { "pin": "D1" }, diff --git a/keyboards/wsk/sl40/config.h b/keyboards/wsk/sl40/config.h index d33de62b5f..a3080656e9 100644 --- a/keyboards/wsk/sl40/config.h +++ b/keyboards/wsk/sl40/config.h @@ -32,7 +32,3 @@ #define RGBLIGHT_EFFECT_RGB_TEST #define RGBLIGHT_EFFECT_ALTERNATING #define RGBLIGHT_EFFECT_TWINKLE -#define RGBLED_NUM 1 -#define RGBLIGHT_HUE_STEP 8 -#define RGBLIGHT_SAT_STEP 8 -#define RGBLIGHT_VAL_STEP 8 diff --git a/keyboards/wsk/sl40/info.json b/keyboards/wsk/sl40/info.json index 09f5f98814..e92afed50c 100644 --- a/keyboards/wsk/sl40/info.json +++ b/keyboards/wsk/sl40/info.json @@ -8,6 +8,11 @@ "pid": "0xC456", "device_version": "0.0.1" }, + "rgblight": { + "saturation_steps": 8, + "brightness_steps": 8, + "led_count": 1 + }, "ws2812": { "pin": "F1" }, diff --git a/keyboards/wsk/tkl30/config.h b/keyboards/wsk/tkl30/config.h index 2dae864ddb..d702489ee7 100644 --- a/keyboards/wsk/tkl30/config.h +++ b/keyboards/wsk/tkl30/config.h @@ -16,7 +16,3 @@ #define RGBLIGHT_EFFECT_RGB_TEST #define RGBLIGHT_EFFECT_ALTERNATING #define RGBLIGHT_EFFECT_TWINKLE -#define RGBLED_NUM 1 -#define RGBLIGHT_HUE_STEP 8 -#define RGBLIGHT_SAT_STEP 8 -#define RGBLIGHT_VAL_STEP 8 diff --git a/keyboards/wsk/tkl30/info.json b/keyboards/wsk/tkl30/info.json index 1046556051..03d152be21 100644 --- a/keyboards/wsk/tkl30/info.json +++ b/keyboards/wsk/tkl30/info.json @@ -8,6 +8,11 @@ "pid": "0x0B7F", "device_version": "0.0.1" }, + "rgblight": { + "saturation_steps": 8, + "brightness_steps": 8, + "led_count": 1 + }, "ws2812": { "pin": "B1" }, diff --git a/keyboards/wuque/creek70/config.h b/keyboards/wuque/creek70/config.h index d33ee006aa..59b7a1b79a 100644 --- a/keyboards/wuque/creek70/config.h +++ b/keyboards/wuque/creek70/config.h @@ -16,11 +16,6 @@ #pragma once -# define RGBLED_NUM 7 -# define RGBLIGHT_HUE_STEP 8 -# define RGBLIGHT_SAT_STEP 8 -# define RGBLIGHT_VAL_STEP 8 -# define RGBLIGHT_SLEEP # define RGBLIGHT_EFFECT_BREATHING # define RGBLIGHT_EFFECT_RAINBOW_MOOD # define RGBLIGHT_EFFECT_RAINBOW_SWIRL diff --git a/keyboards/wuque/creek70/info.json b/keyboards/wuque/creek70/info.json index 10e43b340d..7f55fa28d2 100644 --- a/keyboards/wuque/creek70/info.json +++ b/keyboards/wuque/creek70/info.json @@ -30,7 +30,11 @@ "pin": "D0" }, "rgblight": { - "max_brightness": 200 + "saturation_steps": 8, + "brightness_steps": 8, + "led_count": 7, + "max_brightness": 200, + "sleep": true }, "layout_aliases": { "LAYOUT": "LAYOUT_all" diff --git a/keyboards/wuque/ikki68/config.h b/keyboards/wuque/ikki68/config.h index 80ecfb420d..2adc1bc9cf 100644 --- a/keyboards/wuque/ikki68/config.h +++ b/keyboards/wuque/ikki68/config.h @@ -23,11 +23,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. /* Locking resynchronize hack */ #define LOCKING_RESYNC_ENABLE - #define RGBLED_NUM 8 - #define RGBLIGHT_HUE_STEP 8 - #define RGBLIGHT_SAT_STEP 8 - #define RGBLIGHT_VAL_STEP 8 - #define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */ /*======= RGB function=======*/ #define RGBLIGHT_EFFECT_BREATHING #define RGBLIGHT_EFFECT_RAINBOW_MOOD diff --git a/keyboards/wuque/ikki68/info.json b/keyboards/wuque/ikki68/info.json index e450f95dbf..9558b72f1c 100644 --- a/keyboards/wuque/ikki68/info.json +++ b/keyboards/wuque/ikki68/info.json @@ -12,7 +12,11 @@ "pin": "E2" }, "rgblight": { - "max_brightness": 200 + "saturation_steps": 8, + "brightness_steps": 8, + "led_count": 8, + "max_brightness": 200, + "sleep": true }, "matrix_pins": { "cols": ["D1", "D0", "D2", "D3", "D5", "D4", "D6", "D7", "B4", "B5", "F0", "F1", "B6", "F4", "F5", "F6", "F7"], diff --git a/keyboards/wuque/ikki68_aurora/config.h b/keyboards/wuque/ikki68_aurora/config.h index c5726c333e..ae13273f23 100644 --- a/keyboards/wuque/ikki68_aurora/config.h +++ b/keyboards/wuque/ikki68_aurora/config.h @@ -23,11 +23,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. /* Locking resynchronize hack */ #define LOCKING_RESYNC_ENABLE - #define RGBLED_NUM 20 - #define RGBLIGHT_HUE_STEP 8 - #define RGBLIGHT_SAT_STEP 8 - #define RGBLIGHT_VAL_STEP 8 - #define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */ /*======= RGB function=======*/ #define RGBLIGHT_EFFECT_BREATHING #define RGBLIGHT_EFFECT_RAINBOW_MOOD diff --git a/keyboards/wuque/ikki68_aurora/info.json b/keyboards/wuque/ikki68_aurora/info.json index 2e93f0efc7..974170287d 100644 --- a/keyboards/wuque/ikki68_aurora/info.json +++ b/keyboards/wuque/ikki68_aurora/info.json @@ -21,7 +21,11 @@ "pin": "E2" }, "rgblight": { - "max_brightness": 200 + "saturation_steps": 8, + "brightness_steps": 8, + "led_count": 20, + "max_brightness": 200, + "sleep": true }, "processor": "atmega32u4", "bootloader": "atmel-dfu", diff --git a/keyboards/wuque/mammoth20x/config.h b/keyboards/wuque/mammoth20x/config.h index c35fac65d6..db5a8d534e 100644 --- a/keyboards/wuque/mammoth20x/config.h +++ b/keyboards/wuque/mammoth20x/config.h @@ -22,7 +22,3 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. /* Locking resynchronize hack */ #define LOCKING_RESYNC_ENABLE - -// Note: array is { col, row ) -#define ENCODERS_CW_KEY { { 3, 2 } } -#define ENCODERS_CCW_KEY { { 3, 4 } } diff --git a/keyboards/wuque/mammoth20x/info.json b/keyboards/wuque/mammoth20x/info.json index 3c0c0e29b8..f7917ae26d 100644 --- a/keyboards/wuque/mammoth20x/info.json +++ b/keyboards/wuque/mammoth20x/info.json @@ -29,9 +29,7 @@ {"matrix": [0, 0], "x": 0, "y": 0}, {"matrix": [0, 1], "x": 1, "y": 0}, {"matrix": [0, 2], "x": 2, "y": 0}, - {"matrix": [2, 3], "x": 3, "y": 0, "w": 0.5}, {"matrix": [0, 3], "x": 3.5, "y": 0}, - {"matrix": [4, 3], "x": 4.5, "y": 0, "w": 0.5}, {"matrix": [1, 0], "x": 0, "y": 1}, {"matrix": [1, 1], "x": 1, "y": 1}, diff --git a/keyboards/wuque/mammoth20x/keymaps/default/keymap.c b/keyboards/wuque/mammoth20x/keymaps/default/keymap.c index e19b3bc172..5f444bbff3 100644 --- a/keyboards/wuque/mammoth20x/keymaps/default/keymap.c +++ b/keyboards/wuque/mammoth20x/keymaps/default/keymap.c @@ -18,7 +18,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { [0] = LAYOUT( - KC_ESC, KC_PAUS, KC_DEL, KC_VOLU, KC_MUTE, KC_VOLD, + KC_ESC, KC_PAUS, KC_DEL, KC_MUTE, KC_LNUM, KC_PSLS, KC_PAST, KC_PMNS, KC_P7, KC_P8, KC_P9, KC_P4, KC_P5, KC_P6, KC_PPLS, @@ -26,7 +26,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { KC_P0, KC_PDOT, KC_PENT ), [1] = LAYOUT( - _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, diff --git a/keyboards/wuque/mammoth20x/keymaps/via/keymap.c b/keyboards/wuque/mammoth20x/keymaps/via/keymap.c index e5fe34fd7b..e48b8b50d1 100644 --- a/keyboards/wuque/mammoth20x/keymaps/via/keymap.c +++ b/keyboards/wuque/mammoth20x/keymaps/via/keymap.c @@ -18,7 +18,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { [0] = LAYOUT( - KC_ESC, KC_PAUS, KC_DEL, KC_VOLD, KC_MUTE, KC_VOLU, + KC_ESC, KC_PAUS, KC_DEL, KC_MUTE, KC_NUM, KC_PSLS, KC_PAST, KC_PMNS, KC_P7, KC_P8, KC_P9, KC_P4, KC_P5, KC_P6, KC_PPLS, @@ -26,7 +26,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { KC_P0, KC_PDOT, KC_PENT ), [1] = LAYOUT( - _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, @@ -34,7 +34,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { _______, _______, _______ ), [2] = LAYOUT( - _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, @@ -42,7 +42,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { _______, _______, _______ ), [3] = LAYOUT( - _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, @@ -50,3 +50,12 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { _______, _______, _______ ), }; + +#ifdef ENCODER_MAP_ENABLE +const uint16_t PROGMEM encoder_map[][NUM_ENCODERS][NUM_DIRECTIONS] = { + [0] = { ENCODER_CCW_CW(KC_VOLD, KC_VOLU) }, + [1] = { ENCODER_CCW_CW(_______, _______) }, + [2] = { ENCODER_CCW_CW(_______, _______) }, + [3] = { ENCODER_CCW_CW(_______, _______) }, +}; +#endif diff --git a/keyboards/wuque/mammoth20x/keymaps/via/rules.mk b/keyboards/wuque/mammoth20x/keymaps/via/rules.mk index 36b7ba9cbc..1189f4ad19 100644 --- a/keyboards/wuque/mammoth20x/keymaps/via/rules.mk +++ b/keyboards/wuque/mammoth20x/keymaps/via/rules.mk @@ -1,2 +1,3 @@ VIA_ENABLE = yes LTO_ENABLE = yes +ENCODER_MAP_ENABLE = yes diff --git a/keyboards/wuque/mammoth20x/mammoth20x.c b/keyboards/wuque/mammoth20x/mammoth20x.c deleted file mode 100644 index eeaea79c71..0000000000 --- a/keyboards/wuque/mammoth20x/mammoth20x.c +++ /dev/null @@ -1,62 +0,0 @@ -/* Copyright 2021 wuquestudio - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see <http://www.gnu.org/licenses/>. - */ - -#include "quantum.h" - -static uint8_t encoder_state[NUM_ENCODERS] = {0}; -static keypos_t encoder_cw[NUM_ENCODERS] = ENCODERS_CW_KEY; -static keypos_t encoder_ccw[NUM_ENCODERS] = ENCODERS_CCW_KEY; - -void encoder_action_unregister(void) -{ - for (int index = 0; index < NUM_ENCODERS; ++index) - { - if (encoder_state[index]) - { - keyevent_t encoder_event = (keyevent_t){ - .key = encoder_state[index] >> 1 ? encoder_cw[index] : encoder_ccw[index], - .pressed = false, - .time = timer_read(), - .type = KEY_EVENT - }; - encoder_state[index] = 0; - action_exec(encoder_event); - } - } -} -void encoder_action_register(uint8_t index, bool clockwise) -{ - keyevent_t encoder_event = (keyevent_t){ - .key = clockwise ? encoder_cw[index] : encoder_ccw[index], - .pressed = true, - .time = timer_read(), - .type = KEY_EVENT - }; - encoder_state[index] = (clockwise ^ 1) | (clockwise << 1); - action_exec(encoder_event); -} - -void matrix_scan_kb(void) -{ - encoder_action_unregister(); - matrix_scan_user(); -} - -bool encoder_update_kb(uint8_t index, bool clockwise) -{ - encoder_action_register(index, clockwise); - return true; -}; diff --git a/keyboards/wuque/mammoth75x/config.h b/keyboards/wuque/mammoth75x/config.h index 6b0d17be5c..db5a8d534e 100644 --- a/keyboards/wuque/mammoth75x/config.h +++ b/keyboards/wuque/mammoth75x/config.h @@ -22,7 +22,3 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. /* Locking resynchronize hack */ #define LOCKING_RESYNC_ENABLE - -// Note: array is { col, row ) -#define ENCODERS_CW_KEY { { 3, 5 } } -#define ENCODERS_CCW_KEY { { 5, 5 } } diff --git a/keyboards/wuque/mammoth75x/info.json b/keyboards/wuque/mammoth75x/info.json index ef48587375..9b9bc1abb6 100644 --- a/keyboards/wuque/mammoth75x/info.json +++ b/keyboards/wuque/mammoth75x/info.json @@ -41,10 +41,7 @@ {"matrix": [0, 11], "x": 11.75, "y": 0}, {"matrix": [0, 12], "x": 12.75, "y": 0}, {"matrix": [0, 13], "x": 14, "y": 0}, - - {"matrix": [5, 3], "x": 15.65, "y": 0.125, "w": 0.6, "h": 0.5}, {"matrix": [0, 14], "x": 15.75, "y": 0.625}, - {"matrix": [5, 5], "x": 16.25, "y": 0.125, "w": 0.6, "h": 0.5}, {"matrix": [1, 0], "x": 0, "y": 1.25}, {"matrix": [1, 1], "x": 1, "y": 1.25}, diff --git a/keyboards/wuque/mammoth75x/keymaps/default/keymap.c b/keyboards/wuque/mammoth75x/keymaps/default/keymap.c index b0273298dc..0ed2bdfebe 100644 --- a/keyboards/wuque/mammoth75x/keymaps/default/keymap.c +++ b/keyboards/wuque/mammoth75x/keymaps/default/keymap.c @@ -18,7 +18,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { [0] = LAYOUT_all( - KC_ESC, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_DEL, KC_VOLD, KC_MUTE,KC_VOLU, + KC_ESC, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_DEL, KC_MUTE, KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_BSPC, KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_INS, KC_PGUP, KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, KC_END, KC_PGDN, @@ -26,7 +26,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_SPC, KC_SPC, KC_RALT, MO(1), KC_RCTL, KC_LEFT, KC_DOWN, KC_RGHT ), [1] = LAYOUT_all( - _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_MPRV, KC_MPLY, KC_MNXT, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_MPLY, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, QK_BOOT, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, diff --git a/keyboards/wuque/mammoth75x/keymaps/via/keymap.c b/keyboards/wuque/mammoth75x/keymaps/via/keymap.c index 13d5d4fa7a..57f7a13cbd 100644 --- a/keyboards/wuque/mammoth75x/keymaps/via/keymap.c +++ b/keyboards/wuque/mammoth75x/keymaps/via/keymap.c @@ -18,7 +18,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { [0] = LAYOUT_all( - KC_ESC, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_DEL, KC_VOLD, KC_MUTE,KC_VOLU, + KC_ESC, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_DEL, KC_MUTE, KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_BSPC, KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_INS, KC_PGUP, KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, KC_END, KC_PGDN, @@ -26,7 +26,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_SPC, KC_SPC, KC_RALT, MO(1), KC_RCTL, KC_LEFT, KC_DOWN, KC_RGHT ), [1] = LAYOUT_all( - _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_MPRV, KC_MPLY, KC_MNXT, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_MPLY, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, QK_BOOT, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, @@ -34,7 +34,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______ ), [2] = LAYOUT_all( - _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, @@ -42,7 +42,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______ ), [3] = LAYOUT_all( - _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, @@ -50,3 +50,12 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______ ), }; + +#ifdef ENCODER_MAP_ENABLE +const uint16_t PROGMEM encoder_map[][NUM_ENCODERS][NUM_DIRECTIONS] = { + [0] = { ENCODER_CCW_CW(KC_VOLD, KC_VOLU) }, + [1] = { ENCODER_CCW_CW(KC_MPRV, KC_MNXT) }, + [2] = { ENCODER_CCW_CW(_______, _______) }, + [3] = { ENCODER_CCW_CW(_______, _______) }, +}; +#endif diff --git a/keyboards/wuque/mammoth75x/keymaps/via/rules.mk b/keyboards/wuque/mammoth75x/keymaps/via/rules.mk index 36b7ba9cbc..1189f4ad19 100644 --- a/keyboards/wuque/mammoth75x/keymaps/via/rules.mk +++ b/keyboards/wuque/mammoth75x/keymaps/via/rules.mk @@ -1,2 +1,3 @@ VIA_ENABLE = yes LTO_ENABLE = yes +ENCODER_MAP_ENABLE = yes diff --git a/keyboards/wuque/mammoth75x/mammoth75x.c b/keyboards/wuque/mammoth75x/mammoth75x.c deleted file mode 100644 index 3b2d995b7e..0000000000 --- a/keyboards/wuque/mammoth75x/mammoth75x.c +++ /dev/null @@ -1,64 +0,0 @@ -/* Copyright 2021 wuquestudio - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see <http://www.gnu.org/licenses/>. - */ - -#include "quantum.h" - -#ifdef VIA_ENABLE -static uint8_t encoder_state[NUM_ENCODERS] = {0}; -static keypos_t encoder_cw[NUM_ENCODERS] = ENCODERS_CW_KEY; -static keypos_t encoder_ccw[NUM_ENCODERS] = ENCODERS_CCW_KEY; - -void encoder_action_unregister(void) -{ - for (int index = 0; index < NUM_ENCODERS; ++index) - { - if (encoder_state[index]) - { - keyevent_t encoder_event = (keyevent_t){ - .key = encoder_state[index] >> 1 ? encoder_cw[index] : encoder_ccw[index], - .pressed = false, - .time = timer_read(), - .type = KEY_EVENT - }; - encoder_state[index] = 0; - action_exec(encoder_event); - } - } -} -void encoder_action_register(uint8_t index, bool clockwise) -{ - keyevent_t encoder_event = (keyevent_t){ - .key = clockwise ? encoder_cw[index] : encoder_ccw[index], - .pressed = true, - .time = timer_read(), - .type = KEY_EVENT - }; - encoder_state[index] = (clockwise ^ 1) | (clockwise << 1); - action_exec(encoder_event); -} - -void matrix_scan_kb(void) -{ - encoder_action_unregister(); - matrix_scan_user(); -} - -bool encoder_update_kb(uint8_t index, bool clockwise) -{ - encoder_action_register(index, clockwise); - return true; -}; -#endif diff --git a/keyboards/wuque/promise87/ansi/config.h b/keyboards/wuque/promise87/ansi/config.h index b0e79e97c7..73de06450a 100644 --- a/keyboards/wuque/promise87/ansi/config.h +++ b/keyboards/wuque/promise87/ansi/config.h @@ -16,11 +16,6 @@ #pragma once - #define RGBLED_NUM 1 - #define RGBLIGHT_HUE_STEP 8 - #define RGBLIGHT_SAT_STEP 8 - #define RGBLIGHT_VAL_STEP 8 - #define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */ /*======= RGB function=======*/ #define RGBLIGHT_EFFECT_BREATHING #define RGBLIGHT_EFFECT_RAINBOW_MOOD diff --git a/keyboards/wuque/promise87/ansi/info.json b/keyboards/wuque/promise87/ansi/info.json index d49b4aaa79..6e77220f13 100644 --- a/keyboards/wuque/promise87/ansi/info.json +++ b/keyboards/wuque/promise87/ansi/info.json @@ -21,7 +21,11 @@ "pin": "D2" }, "rgblight": { - "max_brightness": 200 + "saturation_steps": 8, + "brightness_steps": 8, + "led_count": 1, + "max_brightness": 200, + "sleep": true }, "processor": "atmega32u4", "bootloader": "atmel-dfu", diff --git a/keyboards/wuque/promise87/wkl/config.h b/keyboards/wuque/promise87/wkl/config.h index b0e79e97c7..73de06450a 100644 --- a/keyboards/wuque/promise87/wkl/config.h +++ b/keyboards/wuque/promise87/wkl/config.h @@ -16,11 +16,6 @@ #pragma once - #define RGBLED_NUM 1 - #define RGBLIGHT_HUE_STEP 8 - #define RGBLIGHT_SAT_STEP 8 - #define RGBLIGHT_VAL_STEP 8 - #define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */ /*======= RGB function=======*/ #define RGBLIGHT_EFFECT_BREATHING #define RGBLIGHT_EFFECT_RAINBOW_MOOD diff --git a/keyboards/wuque/promise87/wkl/info.json b/keyboards/wuque/promise87/wkl/info.json index 7e0d7cfdcb..500c1bd9db 100644 --- a/keyboards/wuque/promise87/wkl/info.json +++ b/keyboards/wuque/promise87/wkl/info.json @@ -21,7 +21,11 @@ "pin": "D2" }, "rgblight": { - "max_brightness": 200 + "saturation_steps": 8, + "brightness_steps": 8, + "led_count": 1, + "max_brightness": 200, + "sleep": true }, "processor": "atmega32u4", "bootloader": "atmel-dfu", diff --git a/keyboards/wuque/serneity65/info.json b/keyboards/wuque/serneity65/info.json index 9ebc9af843..f27073b285 100644 --- a/keyboards/wuque/serneity65/info.json +++ b/keyboards/wuque/serneity65/info.json @@ -41,9 +41,7 @@ {"matrix": [0, 11], "x": 11, "y": 0}, {"matrix": [0, 12], "x": 12, "y": 0}, {"matrix": [0, 13], "x": 13, "y": 0}, - {"matrix": [4, 3], "x": 15, "y": 0, "w": 0.5}, {"matrix": [0, 14], "x": 15.5, "y": 0}, - {"matrix": [4, 5], "x": 16.5, "y": 0, "w": 0.5}, {"matrix": [1, 0], "x": 0, "y": 1, "w": 1.5}, {"matrix": [1, 1], "x": 1.5, "y": 1}, diff --git a/keyboards/wuque/serneity65/keymaps/default/keymap.c b/keyboards/wuque/serneity65/keymaps/default/keymap.c index 2acca2f0c0..23ddfced88 100644 --- a/keyboards/wuque/serneity65/keymaps/default/keymap.c +++ b/keyboards/wuque/serneity65/keymaps/default/keymap.c @@ -18,17 +18,17 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { [0] = LAYOUT_all( - KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_VOLD, KC_MUTE, KC_VOLU, + KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_MUTE, KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, KC_BSPC, KC_PGUP, KC_LSFT, KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_UP, KC_END, KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_SPC, KC_SPC, KC_RALT, MO(1), KC_LEFT, KC_DOWN, KC_RGHT ), [1] = LAYOUT_all( - KC_GRV, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, _______, KC_MPRV, KC_MPLY, KC_MNXT, + KC_GRV, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, _______, KC_MPLY, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, QK_BOOT, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______ - ), -}; + ) + }; diff --git a/keyboards/wuque/serneity65/keymaps/via/keymap.c b/keyboards/wuque/serneity65/keymaps/via/keymap.c index 8e820022fe..05abb620da 100644 --- a/keyboards/wuque/serneity65/keymaps/via/keymap.c +++ b/keyboards/wuque/serneity65/keymaps/via/keymap.c @@ -18,31 +18,40 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { [0] = LAYOUT_all( - KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_VOLD, KC_MUTE, KC_VOLU, + KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_MUTE, KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, KC_BSPC, KC_PGUP, KC_LSFT, KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_UP, KC_END, KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_SPC, KC_SPC, KC_RALT, MO(1), KC_LEFT, KC_DOWN, KC_RGHT ), [1] = LAYOUT_all( - KC_GRV, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, _______, KC_MPRV, KC_MPLY, KC_MNXT, + KC_GRV, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, _______, KC_MPLY, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, QK_BOOT, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______ ), [2] = LAYOUT_all( - _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______ ), [3] = LAYOUT_all( - _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______ ), }; + +#ifdef ENCODER_MAP_ENABLE +const uint16_t PROGMEM encoder_map[][NUM_ENCODERS][NUM_DIRECTIONS] = { + [0] = { ENCODER_CCW_CW(KC_VOLD, KC_VOLU) }, + [1] = { ENCODER_CCW_CW(KC_MPRV, KC_MNXT) }, + [2] = { ENCODER_CCW_CW(_______, _______) }, + [3] = { ENCODER_CCW_CW(_______, _______) }, +}; +#endif diff --git a/keyboards/wuque/serneity65/keymaps/via/rules.mk b/keyboards/wuque/serneity65/keymaps/via/rules.mk index 43061db1dd..1189f4ad19 100644 --- a/keyboards/wuque/serneity65/keymaps/via/rules.mk +++ b/keyboards/wuque/serneity65/keymaps/via/rules.mk @@ -1,2 +1,3 @@ VIA_ENABLE = yes -LTO_ENABLE = yes
\ No newline at end of file +LTO_ENABLE = yes +ENCODER_MAP_ENABLE = yes diff --git a/keyboards/wuque/serneity65/serneity65.c b/keyboards/wuque/serneity65/serneity65.c deleted file mode 100644 index 58e0663467..0000000000 --- a/keyboards/wuque/serneity65/serneity65.c +++ /dev/null @@ -1,64 +0,0 @@ -/* Copyright 2021 wuque - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see <http://www.gnu.org/licenses/>. - */ - -#include "quantum.h" - -#ifdef VIA_ENABLE -static uint8_t encoder_state[NUM_ENCODERS] = {0}; -static keypos_t encoder_cw[NUM_ENCODERS] = ENCODERS_CW_KEY; -static keypos_t encoder_ccw[NUM_ENCODERS] = ENCODERS_CCW_KEY; - -void encoder_action_unregister(void) -{ - for (int index = 0; index < NUM_ENCODERS; ++index) - { - if (encoder_state[index]) - { - keyevent_t encoder_event = (keyevent_t){ - .key = encoder_state[index] >> 1 ? encoder_cw[index] : encoder_ccw[index], - .pressed = false, - .time = timer_read(), - .type = KEY_EVENT - }; - encoder_state[index] = 0; - action_exec(encoder_event); - } - } -} -void encoder_action_register(uint8_t index, bool clockwise) -{ - keyevent_t encoder_event = (keyevent_t){ - .key = clockwise ? encoder_cw[index] : encoder_ccw[index], - .pressed = true, - .time = timer_read(), - .type = KEY_EVENT - }; - encoder_state[index] = (clockwise ^ 1) | (clockwise << 1); - action_exec(encoder_event); -} - -void matrix_scan_kb(void) -{ - encoder_action_unregister(); - matrix_scan_user(); -} - -bool encoder_update_kb(uint8_t index, bool clockwise) -{ - encoder_action_register(index, clockwise); - return true; -}; -#endif diff --git a/keyboards/xbows/woody/woody.c b/keyboards/xbows/woody/woody.c index 9757bde9c9..fa0ba7f768 100644 --- a/keyboards/xbows/woody/woody.c +++ b/keyboards/xbows/woody/woody.c @@ -101,7 +101,7 @@ bool rgb_matrix_indicators_kb(void) { if (!rgb_matrix_indicators_user()) { return false; } - if (IS_LED_ON(host_keyboard_leds(), USB_LED_CAPS_LOCK)) { + if (host_keyboard_led_state().caps_lock) { rgb_matrix_set_color(30, 0xFF, 0x00, 0x00); } return true; diff --git a/keyboards/xelus/akis/config.h b/keyboards/xelus/akis/config.h index ae0e692191..1c83936021 100644 --- a/keyboards/xelus/akis/config.h +++ b/keyboards/xelus/akis/config.h @@ -17,7 +17,6 @@ #pragma once /* RGB Lighting */ -#define RGBLED_NUM 23 #define RGBLIGHT_EFFECT_BREATHING #define RGBLIGHT_EFFECT_RAINBOW_MOOD #define RGBLIGHT_EFFECT_RAINBOW_SWIRL diff --git a/keyboards/xelus/akis/info.json b/keyboards/xelus/akis/info.json index 320ad9824b..c55e16f75e 100644 --- a/keyboards/xelus/akis/info.json +++ b/keyboards/xelus/akis/info.json @@ -8,6 +8,9 @@ "pid": "0xA04B", "device_version": "0.0.1" }, + "rgblight": { + "led_count": 23 + }, "ws2812": { "pin": "B0" }, diff --git a/keyboards/xelus/kangaroo/rev1/rules.mk b/keyboards/xelus/kangaroo/rev1/rules.mk index 805e07ebc2..a6006b7150 100644 --- a/keyboards/xelus/kangaroo/rev1/rules.mk +++ b/keyboards/xelus/kangaroo/rev1/rules.mk @@ -11,5 +11,3 @@ RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow AUDIO_ENABLE = no # Audio output EEPROM_DRIVER = i2c -# Enter lower-power sleep mode when on the ChibiOS idle thread -OPT_DEFS += -DCORTEX_ENABLE_WFI_IDLE=TRUE diff --git a/keyboards/xelus/kangaroo/rev2/rules.mk b/keyboards/xelus/kangaroo/rev2/rules.mk index c7c6f5f163..613adf3a22 100644 --- a/keyboards/xelus/kangaroo/rev2/rules.mk +++ b/keyboards/xelus/kangaroo/rev2/rules.mk @@ -14,5 +14,3 @@ EEPROM_DRIVER = i2c EEPROM_DRIVER = wear_leveling WEAR_LEVELING_DRIVER = embedded_flash -# Enter lower-power sleep mode when on the ChibiOS idle thread -OPT_DEFS += -DCORTEX_ENABLE_WFI_IDLE=TRUE diff --git a/keyboards/xelus/ninjin/config.h b/keyboards/xelus/ninjin/config.h index a922b89dbf..5611293717 100644 --- a/keyboards/xelus/ninjin/config.h +++ b/keyboards/xelus/ninjin/config.h @@ -17,7 +17,6 @@ #pragma once /* RGB Underglow */ -#define RGBLED_NUM 26 #define RGBLIGHT_EFFECT_BREATHING #define RGBLIGHT_EFFECT_RAINBOW_MOOD #define RGBLIGHT_EFFECT_RAINBOW_SWIRL diff --git a/keyboards/xelus/ninjin/info.json b/keyboards/xelus/ninjin/info.json index 242362ab7e..f682e7d644 100644 --- a/keyboards/xelus/ninjin/info.json +++ b/keyboards/xelus/ninjin/info.json @@ -13,6 +13,7 @@ "driver": "pwm" }, "rgblight": { + "led_count": 26, "max_brightness": 200 }, "matrix_pins": { diff --git a/keyboards/xelus/ninjin/rules.mk b/keyboards/xelus/ninjin/rules.mk index ead22f6c15..e59fc84570 100644 --- a/keyboards/xelus/ninjin/rules.mk +++ b/keyboards/xelus/ninjin/rules.mk @@ -11,5 +11,3 @@ BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality RGBLIGHT_ENABLE = yes # Enable keyboard RGB underglow AUDIO_ENABLE = no # Audio output -# Enter lower-power sleep mode when on the ChibiOS idle thread -OPT_DEFS += -DCORTEX_ENABLE_WFI_IDLE=TRUE diff --git a/keyboards/xelus/pachi/rev1/rules.mk b/keyboards/xelus/pachi/rev1/rules.mk index c02eb841df..d3ca7b060e 100644 --- a/keyboards/xelus/pachi/rev1/rules.mk +++ b/keyboards/xelus/pachi/rev1/rules.mk @@ -1,5 +1,3 @@ -# Enter lower-power sleep mode when on the ChibiOS idle thread -OPT_DEFS += -DCORTEX_ENABLE_WFI_IDLE=TRUE # Build Options # change yes to no to disable diff --git a/keyboards/xelus/rs108/rules.mk b/keyboards/xelus/rs108/rules.mk index 8441c649b2..612c1d666a 100644 --- a/keyboards/xelus/rs108/rules.mk +++ b/keyboards/xelus/rs108/rules.mk @@ -16,5 +16,3 @@ EEPROM_DRIVER = i2c # Save hid interface KEYBOARD_SHARED_EP = yes -# Enter lower-power sleep mode when on the ChibiOS idle thread -OPT_DEFS += -DCORTEX_ENABLE_WFI_IDLE=TRUE diff --git a/keyboards/xelus/rs60/rev2_0/rules.mk b/keyboards/xelus/rs60/rev2_0/rules.mk index e81b538301..965f4edaef 100644 --- a/keyboards/xelus/rs60/rev2_0/rules.mk +++ b/keyboards/xelus/rs60/rev2_0/rules.mk @@ -15,5 +15,3 @@ EEPROM_DRIVER = i2c # Save hid interface KEYBOARD_SHARED_EP = yes -# Enter lower-power sleep mode when on the ChibiOS idle thread -OPT_DEFS += -DCORTEX_ENABLE_WFI_IDLE=TRUE diff --git a/keyboards/xelus/rs60/rev2_1/rules.mk b/keyboards/xelus/rs60/rev2_1/rules.mk index 6329d2c31d..9eeaa8553b 100644 --- a/keyboards/xelus/rs60/rev2_1/rules.mk +++ b/keyboards/xelus/rs60/rev2_1/rules.mk @@ -17,5 +17,3 @@ WEAR_LEVELING_DRIVER = embedded_flash # Save hid interface KEYBOARD_SHARED_EP = yes -# Enter lower-power sleep mode when on the ChibiOS idle thread -OPT_DEFS += -DCORTEX_ENABLE_WFI_IDLE=TRUE diff --git a/keyboards/xelus/trinityxttkl/rules.mk b/keyboards/xelus/trinityxttkl/rules.mk index 120a444ec8..ef90964f9b 100644 --- a/keyboards/xelus/trinityxttkl/rules.mk +++ b/keyboards/xelus/trinityxttkl/rules.mk @@ -14,5 +14,3 @@ BACKLIGHT_ENABLE = no RGBLIGHT_ENABLE = no -# Enter lower-power sleep mode when on the ChibiOS idle thread -OPT_DEFS += -DCORTEX_ENABLE_WFI_IDLE=TRUE diff --git a/keyboards/xelus/valor/rev1/config.h b/keyboards/xelus/valor/rev1/config.h index c431ddad87..2a9944eaab 100644 --- a/keyboards/xelus/valor/rev1/config.h +++ b/keyboards/xelus/valor/rev1/config.h @@ -17,7 +17,6 @@ #pragma once /* RGB Underglow */ -#define RGBLED_NUM 28 #define RGBLIGHT_EFFECT_BREATHING #define RGBLIGHT_EFFECT_RAINBOW_MOOD #define RGBLIGHT_EFFECT_RAINBOW_SWIRL diff --git a/keyboards/xelus/valor/rev1/info.json b/keyboards/xelus/valor/rev1/info.json index 2545fb24b0..b157de001a 100644 --- a/keyboards/xelus/valor/rev1/info.json +++ b/keyboards/xelus/valor/rev1/info.json @@ -12,6 +12,7 @@ "pin": "B0" }, "rgblight": { + "led_count": 28, "max_brightness": 200 }, "matrix_pins": { diff --git a/keyboards/xelus/valor/rev2/config.h b/keyboards/xelus/valor/rev2/config.h index cc63e70bb4..e5acad6f9c 100644 --- a/keyboards/xelus/valor/rev2/config.h +++ b/keyboards/xelus/valor/rev2/config.h @@ -40,7 +40,6 @@ #define DYNAMIC_KEYMAP_EEPROM_MAX_ADDR 8191 /* RGB Matrix */ -#define RGBLED_NUM 28 #define RGB_MATRIX_LED_COUNT 28 #define NOP_FUDGE 0.4 diff --git a/keyboards/xelus/valor_frl_tkl/rev1/rules.mk b/keyboards/xelus/valor_frl_tkl/rev1/rules.mk index 35173d663a..efbd7d0e9b 100644 --- a/keyboards/xelus/valor_frl_tkl/rev1/rules.mk +++ b/keyboards/xelus/valor_frl_tkl/rev1/rules.mk @@ -13,5 +13,3 @@ AUDIO_ENABLE = no # Audio output EEPROM_DRIVER = i2c -# Enter lower-power sleep mode when on the ChibiOS idle thread -OPT_DEFS += -DCORTEX_ENABLE_WFI_IDLE=TRUE diff --git a/keyboards/xelus/valor_frl_tkl/rev2_0/rules.mk b/keyboards/xelus/valor_frl_tkl/rev2_0/rules.mk index 4ecf72dea7..8ee0c3e8fe 100644 --- a/keyboards/xelus/valor_frl_tkl/rev2_0/rules.mk +++ b/keyboards/xelus/valor_frl_tkl/rev2_0/rules.mk @@ -11,7 +11,4 @@ BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow AUDIO_ENABLE = no # Audio output -# Enter lower-power sleep mode when on the ChibiOS idle thread -OPT_DEFS += -DCORTEX_ENABLE_WFI_IDLE=TRUE - KEYBOARD_SHARED_EP = yes diff --git a/keyboards/xelus/valor_frl_tkl/rev2_1/rules.mk b/keyboards/xelus/valor_frl_tkl/rev2_1/rules.mk index 4ecf72dea7..8ee0c3e8fe 100644 --- a/keyboards/xelus/valor_frl_tkl/rev2_1/rules.mk +++ b/keyboards/xelus/valor_frl_tkl/rev2_1/rules.mk @@ -11,7 +11,4 @@ BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow AUDIO_ENABLE = no # Audio output -# Enter lower-power sleep mode when on the ChibiOS idle thread -OPT_DEFS += -DCORTEX_ENABLE_WFI_IDLE=TRUE - KEYBOARD_SHARED_EP = yes diff --git a/keyboards/xelus/xs108/rules.mk b/keyboards/xelus/xs108/rules.mk index a204d485fa..5ed7b869ae 100644 --- a/keyboards/xelus/xs108/rules.mk +++ b/keyboards/xelus/xs108/rules.mk @@ -12,5 +12,3 @@ RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow AUDIO_ENABLE = no # Audio output EEPROM_DRIVER = i2c -# Enter lower-power sleep mode when on the ChibiOS idle thread -OPT_DEFS += -DCORTEX_ENABLE_WFI_IDLE=TRUE diff --git a/keyboards/xelus/xs60/hotswap/config.h b/keyboards/xelus/xs60/hotswap/config.h index 242560c067..d1138c735d 100644 --- a/keyboards/xelus/xs60/hotswap/config.h +++ b/keyboards/xelus/xs60/hotswap/config.h @@ -38,7 +38,6 @@ #define DYNAMIC_KEYMAP_EEPROM_MAX_ADDR 8191 // RGBLIGHT -#define RGBLED_NUM 8 // actually only has 1 #define RGBLIGHT_LAYERS #define WS2812_EXTERNAL_PULLUP #define RGBLIGHT_LAYERS_OVERRIDE_RGB_OFF diff --git a/keyboards/xelus/xs60/hotswap/info.json b/keyboards/xelus/xs60/hotswap/info.json index 4d6888f707..81cf86498b 100644 --- a/keyboards/xelus/xs60/hotswap/info.json +++ b/keyboards/xelus/xs60/hotswap/info.json @@ -8,6 +8,9 @@ "pid": "0x5861", "device_version": "0.0.1" }, + "rgblight": { + "led_count": 8 + }, "ws2812": { "pin": "A10" }, diff --git a/keyboards/xelus/xs60/soldered/config.h b/keyboards/xelus/xs60/soldered/config.h index cbbdc49b12..4b7be4d441 100644 --- a/keyboards/xelus/xs60/soldered/config.h +++ b/keyboards/xelus/xs60/soldered/config.h @@ -37,7 +37,6 @@ // More EEPROM for layers // RGBLIGHT -#define RGBLED_NUM 8 // actually only has 1 #define RGBLIGHT_LAYERS #define WS2812_EXTERNAL_PULLUP #define RGBLIGHT_LAYERS_OVERRIDE_RGB_OFF diff --git a/keyboards/xelus/xs60/soldered/info.json b/keyboards/xelus/xs60/soldered/info.json index 6e540617c2..20de0ef837 100644 --- a/keyboards/xelus/xs60/soldered/info.json +++ b/keyboards/xelus/xs60/soldered/info.json @@ -8,6 +8,9 @@ "pid": "0x5860", "device_version": "0.0.1" }, + "rgblight": { + "led_count": 8 + }, "ws2812": { "pin": "A10" }, diff --git a/keyboards/xiudi/xd002/config.h b/keyboards/xiudi/xd002/config.h index d442ee5762..0d0cd3712a 100644 --- a/keyboards/xiudi/xd002/config.h +++ b/keyboards/xiudi/xd002/config.h @@ -15,8 +15,6 @@ */ #pragma once -#define RGBLED_NUM 2 - // Save as much space as we can... #define LAYER_STATE_8BIT #define NO_ACTION_LAYER diff --git a/keyboards/xiudi/xd002/info.json b/keyboards/xiudi/xd002/info.json index cce509be79..1e0b22f96b 100644 --- a/keyboards/xiudi/xd002/info.json +++ b/keyboards/xiudi/xd002/info.json @@ -8,6 +8,9 @@ "pid": "0x0202", "device_version": "0.0.1" }, + "rgblight": { + "led_count": 2 + }, "ws2812": { "pin": "B2" }, diff --git a/keyboards/xiudi/xd004/info.json b/keyboards/xiudi/xd004/info.json index 597c5dc818..8c7946a02d 100644 --- a/keyboards/xiudi/xd004/info.json +++ b/keyboards/xiudi/xd004/info.json @@ -11,6 +11,10 @@ "pin": "D5", "levels": 6 }, + "rgblight": { + "hue_steps": 10, + "led_count": 2 + }, "ws2812": { "pin": "C6" }, diff --git a/keyboards/xiudi/xd004/v1/config.h b/keyboards/xiudi/xd004/v1/config.h index 823ba86358..256e234237 100644 --- a/keyboards/xiudi/xd004/v1/config.h +++ b/keyboards/xiudi/xd004/v1/config.h @@ -30,10 +30,6 @@ further optimizations can be done on that side. */ #define RGBLIGHT_EFFECT_STATIC_GRADIENT #define RGBLIGHT_EFFECT_RAINBOW_SWIRL -#define RGBLED_NUM 2 -#define RGBLIGHT_HUE_STEP 10 -#define RGBLIGHT_SAT_STEP 17 -#define RGBLIGHT_VAL_STEP 17 /* disable action features */ // #define NO_ACTION_ONESHOT // 462 bytes <- this needs to be un-commented out if Link Time Optimization is disabled, otherwise file is too large diff --git a/keyboards/xiudi/xd60/rev2/config.h b/keyboards/xiudi/xd60/rev2/config.h index 21efad0d81..3980b2fb71 100644 --- a/keyboards/xiudi/xd60/rev2/config.h +++ b/keyboards/xiudi/xd60/rev2/config.h @@ -29,10 +29,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #define RGBLIGHT_EFFECT_RGB_TEST #define RGBLIGHT_EFFECT_ALTERNATING #define RGBLIGHT_EFFECT_TWINKLE -#define RGBLED_NUM 6 // Number of LEDs -#define RGBLIGHT_HUE_STEP 10 -#define RGBLIGHT_SAT_STEP 17 -#define RGBLIGHT_VAL_STEP 17 /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ #define LOCKING_SUPPORT_ENABLE diff --git a/keyboards/xiudi/xd60/rev2/info.json b/keyboards/xiudi/xd60/rev2/info.json index c45ef7af64..2fae5080c3 100644 --- a/keyboards/xiudi/xd60/rev2/info.json +++ b/keyboards/xiudi/xd60/rev2/info.json @@ -13,6 +13,10 @@ "levels": 6, "on_state": 0 }, + "rgblight": { + "hue_steps": 10, + "led_count": 6 + }, "ws2812": { "pin": "F6" }, diff --git a/keyboards/xiudi/xd60/rev3/config.h b/keyboards/xiudi/xd60/rev3/config.h index f8845d411f..80100d2cf1 100644 --- a/keyboards/xiudi/xd60/rev3/config.h +++ b/keyboards/xiudi/xd60/rev3/config.h @@ -29,10 +29,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #define RGBLIGHT_EFFECT_RGB_TEST #define RGBLIGHT_EFFECT_ALTERNATING #define RGBLIGHT_EFFECT_TWINKLE -#define RGBLED_NUM 12 -#define RGBLIGHT_HUE_STEP 10 -#define RGBLIGHT_SAT_STEP 17 -#define RGBLIGHT_VAL_STEP 17 /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ #define LOCKING_SUPPORT_ENABLE diff --git a/keyboards/xiudi/xd60/rev3/info.json b/keyboards/xiudi/xd60/rev3/info.json index 68c97c0a9e..c77b145607 100644 --- a/keyboards/xiudi/xd60/rev3/info.json +++ b/keyboards/xiudi/xd60/rev3/info.json @@ -13,6 +13,10 @@ "levels": 6, "on_state": 0 }, + "rgblight": { + "hue_steps": 10, + "led_count": 12 + }, "ws2812": { "pin": "F6" }, diff --git a/keyboards/xiudi/xd68/config.h b/keyboards/xiudi/xd68/config.h index e62b98a12d..a9c0e097f0 100644 --- a/keyboards/xiudi/xd68/config.h +++ b/keyboards/xiudi/xd68/config.h @@ -49,7 +49,3 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #define RGBLIGHT_EFFECT_RGB_TEST #define RGBLIGHT_EFFECT_ALTERNATING #define RGBLIGHT_EFFECT_TWINKLE -#define RGBLED_NUM 12 // number of LEDs -#define RGBLIGHT_HUE_STEP 12 // units to step when in/decreasing hue -#define RGBLIGHT_SAT_STEP 25 // units to step when in/decresing saturation -#define RGBLIGHT_VAL_STEP 12 // units to step when in/decreasing value (brightness) diff --git a/keyboards/xiudi/xd68/info.json b/keyboards/xiudi/xd68/info.json index 0522a66e57..27f40e6ee8 100644 --- a/keyboards/xiudi/xd68/info.json +++ b/keyboards/xiudi/xd68/info.json @@ -19,6 +19,12 @@ "breathing": true, "on_state": 0 }, + "rgblight": { + "hue_steps": 12, + "saturation_steps": 25, + "brightness_steps": 12, + "led_count": 12 + }, "ws2812": { "pin": "F6" }, diff --git a/keyboards/xiudi/xd75/config.h b/keyboards/xiudi/xd75/config.h index 8acfb92cf5..9a6b76c928 100644 --- a/keyboards/xiudi/xd75/config.h +++ b/keyboards/xiudi/xd75/config.h @@ -17,11 +17,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #pragma once -# define RGBLED_NUM 6 -# define RGBLIGHT_HUE_STEP 12 -# define RGBLIGHT_SAT_STEP 25 -# define RGBLIGHT_VAL_STEP 12 -//# define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */ #define RGBLIGHT_EFFECT_BREATHING #define RGBLIGHT_EFFECT_RAINBOW_MOOD #define RGBLIGHT_EFFECT_RAINBOW_SWIRL diff --git a/keyboards/xiudi/xd75/info.json b/keyboards/xiudi/xd75/info.json index bc2e724214..be0de255ec 100644 --- a/keyboards/xiudi/xd75/info.json +++ b/keyboards/xiudi/xd75/info.json @@ -18,6 +18,12 @@ "levels": 6, "on_state": 0 }, + "rgblight": { + "hue_steps": 12, + "saturation_steps": 25, + "brightness_steps": 12, + "led_count": 6 + }, "ws2812": { "pin": "F6" }, diff --git a/keyboards/xiudi/xd75/keymaps/billypython/keymap.c b/keyboards/xiudi/xd75/keymaps/billypython/keymap.c index 30b9f79606..d8301194f8 100644 --- a/keyboards/xiudi/xd75/keymaps/billypython/keymap.c +++ b/keyboards/xiudi/xd75/keymaps/billypython/keymap.c @@ -41,7 +41,7 @@ bool process_record_user(uint16_t keycode, keyrecord_t *record) { case NUMPAD: if (record->event.pressed) { layer_invert(L_NUMPAD); - bool num_lock = host_keyboard_leds() & 1<<USB_LED_NUM_LOCK; + bool num_lock = host_keyboard_led_state().num_lock; if (num_lock != (bool)IS_LAYER_ON(L_NUMPAD)) { tap_code(KC_NUM_LOCK); // Toggle Num Lock to match layer state. } diff --git a/keyboards/xiudi/xd75/keymaps/boy_314/keymap.c b/keyboards/xiudi/xd75/keymaps/boy_314/keymap.c index 1c5aa90627..1f3897f484 100644 --- a/keyboards/xiudi/xd75/keymaps/boy_314/keymap.c +++ b/keyboards/xiudi/xd75/keymaps/boy_314/keymap.c @@ -126,16 +126,17 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { }; void matrix_init_user(void) { - if (!(host_keyboard_leds() & (1<<USB_LED_NUM_LOCK))) { + if (!host_keyboard_led_state().num_lock) { register_code(KC_NUM_LOCK); unregister_code(KC_NUM_LOCK); } } -void led_set_user(uint8_t usb_led) { - if (usb_led & (1<<USB_LED_CAPS_LOCK)) { +bool led_update_user(led_t led_state) { + if (led_state.caps_lock) { rgblight_mode(18); } else { rgblight_mode(14); } + return false; } diff --git a/keyboards/xiudi/xd75/keymaps/bramver/keymap.c b/keyboards/xiudi/xd75/keymaps/bramver/keymap.c index f44adaf768..960ef3ff1c 100644 --- a/keyboards/xiudi/xd75/keymaps/bramver/keymap.c +++ b/keyboards/xiudi/xd75/keymaps/bramver/keymap.c @@ -85,7 +85,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { [_EMOJIFY] = LAYOUT_ortho_5x15( TO(0) , _______ , _______ , _______ , _______ , _______ , _______ , _______ , _______ , _______ , _______ , _______ , _______ , _______ , QK_BOOT, _______ , _______ , _______ , _______ , _______ , _______ , _______ , _______ , _______ , _______ , _______ , _______ , _______ , _______ , _______, - _______ , X(CELE) , X(PRAY) , X(NAIL) , X(OK) , X(THNK) , _______ , _______ , _______ , X(UNAM) , X(HEYE) , X(COOL) , X(EYES) , X(SMIR) , _______, + _______ , UM(CELE), UM(PRAY), UM(NAIL), UM(OK) , UM(THNK), _______ , _______ , _______ , UM(UNAM), UM(HEYE), UM(COOL), UM(EYES), UM(SMIR), _______, _______ , _______ , _______ , _______ , _______ , _______ , _______ , _______ , _______ , _______ , _______ , _______ , _______ , _______ , _______, _______ , _______ , _______ , _______ , _______ , _______ , _______ , _______ , _______ , _______ , _______ , _______ , _______ , _______ , _______ ) diff --git a/keyboards/xiudi/xd75/keymaps/bramver/readme.md b/keyboards/xiudi/xd75/keymaps/bramver/readme.md index a8ef38703b..cd1a78936e 100644 --- a/keyboards/xiudi/xd75/keymaps/bramver/readme.md +++ b/keyboards/xiudi/xd75/keymaps/bramver/readme.md @@ -37,7 +37,7 @@ _RAISE _EMOJIFY | TO(0) | _______ | _______ | _______ | _______ | _______ | _______ | _______ | _______ | _______ | _______ | _______ | _______ | _______ | RESET | | _______ | _______ | _______ | _______ | _______ | _______ | _______ | _______ | _______ | _______ | _______ | _______ | _______ | _______ | _______ | - | _______ | X(CELE) | X(PRAY) | X(NAIL) | X(OK) | X(THNK) | _______ | _______ | _______ | X(UNAM) | X(HEYE) | X(COOL) | X(EYES) | X(SMIR) | _______ | + | _______ | UM(CELE) | UM(PRAY) | UM(NAIL) | UM(OK) | UM(THNK) | _______ | _______ | _______ | UM(UNAM) | UM(HEYE) | UM(COOL) | UM(EYES) | UM(SMIR) | _______ | | _______ | _______ | _______ | _______ | _______ | _______ | _______ | _______ | _______ | _______ | _______ | _______ | _______ | _______ | _______ | | _______ | _______ | _______ | _______ | _______ | _______ | _______ | _______ | _______ | _______ | _______ | _______ | _______ | _______ | _______ | ```
\ No newline at end of file diff --git a/keyboards/xiudi/xd75/keymaps/bulbizarre/keymap.c b/keyboards/xiudi/xd75/keymaps/bulbizarre/keymap.c index 64add732ad..02dbe01f17 100644 --- a/keyboards/xiudi/xd75/keymaps/bulbizarre/keymap.c +++ b/keyboards/xiudi/xd75/keymaps/bulbizarre/keymap.c @@ -130,16 +130,8 @@ bool process_record_user(uint16_t keycode, keyrecord_t *record) { return true; } -void matrix_init_user(void) { - -} - -void matrix_scan_user(void) { - -} - -void led_set_user(uint8_t usb_led) { - if (IS_LED_ON(usb_led, USB_LED_CAPS_LOCK)) { +bool led_update_user(led_t led_state) { + if (led_state.caps_lock) { capslock_led_on(); } else { capslock_led_off(); @@ -149,4 +141,5 @@ void led_set_user(uint8_t usb_led) { } else { gp100_led_off(); } + return false; } diff --git a/keyboards/xiudi/xd75/keymaps/minna/keymap.c b/keyboards/xiudi/xd75/keymaps/minna/keymap.c index d3ff7557be..535c870ff7 100644 --- a/keyboards/xiudi/xd75/keymaps/minna/keymap.c +++ b/keyboards/xiudi/xd75/keymaps/minna/keymap.c @@ -50,7 +50,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { KC_TAB, KC_NO, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, FI_ARNG, FI_DIAE, KC_ENT, KC_CAPS, KC_NO, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, FI_ODIA, FI_ADIA, FI_QUOT, KC_NO, KC_LSFT, FI_LABK, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, FI_MINS, KC_RSFT, KC_UP, KC_NO, - KC_LCTL, MO(1), KC_LGUI, KC_LALT, XP(BEER, BEERS), KC_SPC, KC_NO, KC_SPC, KC_NO, KC_RALT, KC_APP, KC_RCTL, KC_LEFT, KC_DOWN, KC_RGHT), + KC_LCTL, MO(1), KC_LGUI, KC_LALT, UP(BEER, BEERS), KC_SPC, KC_NO, KC_SPC, KC_NO, KC_RALT, KC_APP, KC_RCTL, KC_LEFT, KC_DOWN, KC_RGHT), /* * ┌────┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┐ diff --git a/keyboards/xiudi/xd75/keymaps/odyssey/keymap.c b/keyboards/xiudi/xd75/keymaps/odyssey/keymap.c index ae27ba0292..4fe70b9cca 100644 --- a/keyboards/xiudi/xd75/keymaps/odyssey/keymap.c +++ b/keyboards/xiudi/xd75/keymaps/odyssey/keymap.c @@ -201,8 +201,6 @@ bool process_record_user(uint16_t keycode, keyrecord_t *record) { return true; } -void matrix_init_user(void) { } - // Rainbow globals int t = 0; int rc = 0; @@ -237,5 +235,3 @@ void matrix_scan_user(void) { } rc--; } - -void led_set_user(uint8_t usb_led) { } diff --git a/keyboards/xiudi/xd84/config.h b/keyboards/xiudi/xd84/config.h index 42cce6f1c0..b8a8855723 100644 --- a/keyboards/xiudi/xd84/config.h +++ b/keyboards/xiudi/xd84/config.h @@ -21,7 +21,6 @@ #define MATRIX_ROWS 6 #define MATRIX_COLS 15 -#define RGBLED_NUM 7 #define RGBLIGHT_EFFECT_BREATHING #define RGBLIGHT_EFFECT_RAINBOW_MOOD #define RGBLIGHT_EFFECT_RAINBOW_SWIRL diff --git a/keyboards/xiudi/xd84/info.json b/keyboards/xiudi/xd84/info.json index f7bfaeaebd..6c79ba9aae 100644 --- a/keyboards/xiudi/xd84/info.json +++ b/keyboards/xiudi/xd84/info.json @@ -17,6 +17,9 @@ "caps_lock": "B6", "on_state": 0 }, + "rgblight": { + "led_count": 7 + }, "ws2812": { "pin": "C7" }, diff --git a/keyboards/xiudi/xd84pro/config.h b/keyboards/xiudi/xd84pro/config.h index ed84a2ad6f..c127678a5d 100644 --- a/keyboards/xiudi/xd84pro/config.h +++ b/keyboards/xiudi/xd84pro/config.h @@ -16,11 +16,6 @@ #pragma once - #define RGBLED_NUM 12 -// #define RGBLIGHT_HUE_STEP 8 -// #define RGBLIGHT_SAT_STEP 8 -// #define RGBLIGHT_VAL_STEP 8 - #define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */ #define RGBLIGHT_EFFECT_BREATHING #define RGBLIGHT_EFFECT_RAINBOW_MOOD #define RGBLIGHT_EFFECT_RAINBOW_SWIRL diff --git a/keyboards/xiudi/xd84pro/info.json b/keyboards/xiudi/xd84pro/info.json index e905ff3e7e..1df9eccb0f 100644 --- a/keyboards/xiudi/xd84pro/info.json +++ b/keyboards/xiudi/xd84pro/info.json @@ -22,6 +22,10 @@ "caps_lock": "B2", "on_state": 0 }, + "rgblight": { + "led_count": 12, + "sleep": true + }, "ws2812": { "pin": "F6" }, diff --git a/keyboards/xiudi/xd87/config.h b/keyboards/xiudi/xd87/config.h index d89929e9c8..948b3fad4a 100644 --- a/keyboards/xiudi/xd87/config.h +++ b/keyboards/xiudi/xd87/config.h @@ -27,10 +27,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #define RGBLIGHT_EFFECT_RGB_TEST #define RGBLIGHT_EFFECT_ALTERNATING #define RGBLIGHT_EFFECT_TWINKLE -#define RGBLED_NUM 14 -#define RGBLIGHT_HUE_STEP 8 -#define RGBLIGHT_SAT_STEP 8 -#define RGBLIGHT_VAL_STEP 8 /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ #define LOCKING_SUPPORT_ENABLE diff --git a/keyboards/xiudi/xd87/info.json b/keyboards/xiudi/xd87/info.json index 5aa56a60e9..4226947c25 100644 --- a/keyboards/xiudi/xd87/info.json +++ b/keyboards/xiudi/xd87/info.json @@ -21,6 +21,11 @@ "caps_lock": "E2", "on_state": 0 }, + "rgblight": { + "saturation_steps": 8, + "brightness_steps": 8, + "led_count": 14 + }, "ws2812": { "pin": "B7" }, diff --git a/keyboards/xiudi/xd96/config.h b/keyboards/xiudi/xd96/config.h index 5329d51483..229eb3e086 100644 --- a/keyboards/xiudi/xd96/config.h +++ b/keyboards/xiudi/xd96/config.h @@ -21,7 +21,6 @@ #define MATRIX_ROWS 6 #define MATRIX_COLS 18 -#define RGBLED_NUM 16 #define RGBLIGHT_EFFECT_BREATHING #define RGBLIGHT_EFFECT_RAINBOW_MOOD #define RGBLIGHT_EFFECT_RAINBOW_SWIRL diff --git a/keyboards/xiudi/xd96/info.json b/keyboards/xiudi/xd96/info.json index 5a04310130..44b797c04c 100644 --- a/keyboards/xiudi/xd96/info.json +++ b/keyboards/xiudi/xd96/info.json @@ -13,6 +13,7 @@ "levels": 10 }, "rgblight": { + "led_count": 16, "max_brightness": 50 }, "indicators": { diff --git a/keyboards/yampad/config.h b/keyboards/yampad/config.h index 6327578ebf..07fa2b40fa 100644 --- a/keyboards/yampad/config.h +++ b/keyboards/yampad/config.h @@ -18,7 +18,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #pragma once /* Underlight configuration */ -#define RGBLED_NUM 9 #define RGBLIGHT_EFFECT_BREATHING #define RGBLIGHT_EFFECT_RAINBOW_MOOD #define RGBLIGHT_EFFECT_RAINBOW_SWIRL diff --git a/keyboards/yampad/info.json b/keyboards/yampad/info.json index 54c363b28b..da0ed58f71 100644 --- a/keyboards/yampad/info.json +++ b/keyboards/yampad/info.json @@ -8,6 +8,9 @@ "pid": "0x8369", "device_version": "0.0.1" }, + "rgblight": { + "led_count": 9 + }, "ws2812": { "pin": "F4" }, diff --git a/keyboards/yandrstudio/buff67v3/config.h b/keyboards/yandrstudio/buff67v3/config.h index 677e41a00d..218f2dc3a8 100644 --- a/keyboards/yandrstudio/buff67v3/config.h +++ b/keyboards/yandrstudio/buff67v3/config.h @@ -17,7 +17,6 @@ #ifdef RGBLIGHT_ENABLE -# define RGBLED_NUM 1 # define RGBLIGHT_EFFECT_BREATHING # define RGBLIGHT_EFFECT_RAINBOW_MOOD # define RGBLIGHT_EFFECT_RAINBOW_SWIRL diff --git a/keyboards/yandrstudio/buff67v3/info.json b/keyboards/yandrstudio/buff67v3/info.json index 69d4903bd6..d750cd6954 100644 --- a/keyboards/yandrstudio/buff67v3/info.json +++ b/keyboards/yandrstudio/buff67v3/info.json @@ -6,6 +6,9 @@ "pid": "0xAA88", "device_version": "1.0.0" }, + "rgblight": { + "led_count": 1 + }, "ws2812": { "pin": "B4", "driver": "pwm" diff --git a/keyboards/yandrstudio/eau_r2/config.h b/keyboards/yandrstudio/eau_r2/config.h index dcf74a160b..28e8bc379a 100644 --- a/keyboards/yandrstudio/eau_r2/config.h +++ b/keyboards/yandrstudio/eau_r2/config.h @@ -17,10 +17,6 @@ #ifdef RGBLIGHT_ENABLE -# define RGBLED_NUM 12 -# define RGBLIGHT_SLEEP -# define RGBLIGHT_VAL_STEP 5 - # define RGBLIGHT_EFFECT_BREATHING # define RGBLIGHT_EFFECT_RAINBOW_MOOD # define RGBLIGHT_EFFECT_RAINBOW_SWIRL diff --git a/keyboards/yandrstudio/eau_r2/info.json b/keyboards/yandrstudio/eau_r2/info.json index e2700ea0cb..6201e9fcca 100644 --- a/keyboards/yandrstudio/eau_r2/info.json +++ b/keyboards/yandrstudio/eau_r2/info.json @@ -15,7 +15,10 @@ "pin": "A8" }, "rgblight": { - "max_brightness": 200 + "brightness_steps": 5, + "led_count": 12, + "max_brightness": 200, + "sleep": true }, "debounce": 8, "layouts": { diff --git a/keyboards/yandrstudio/nightstar75/config.h b/keyboards/yandrstudio/nightstar75/config.h index c6760befde..5d7aac48d9 100644 --- a/keyboards/yandrstudio/nightstar75/config.h +++ b/keyboards/yandrstudio/nightstar75/config.h @@ -17,8 +17,6 @@ #ifdef RGBLIGHT_ENABLE -# define RGBLED_NUM 4 - # define RGBLIGHT_EFFECT_BREATHING # define RGBLIGHT_EFFECT_RAINBOW_MOOD # define RGBLIGHT_EFFECT_RAINBOW_SWIRL diff --git a/keyboards/yandrstudio/nightstar75/info.json b/keyboards/yandrstudio/nightstar75/info.json index 32d0e29263..c2ecd21eae 100644 --- a/keyboards/yandrstudio/nightstar75/info.json +++ b/keyboards/yandrstudio/nightstar75/info.json @@ -11,6 +11,7 @@ "driver": "pwm" }, "rgblight": { + "led_count": 4, "max_brightness": 180 }, "matrix_pins": { diff --git a/keyboards/yandrstudio/nz64/config.h b/keyboards/yandrstudio/nz64/config.h index 5e4cdaaea0..de44d4f3ee 100644 --- a/keyboards/yandrstudio/nz64/config.h +++ b/keyboards/yandrstudio/nz64/config.h @@ -20,8 +20,7 @@ /* RGB Matrix */ #ifdef RGB_MATRIX_ENABLE -# define RGBLED_NUM 82 -# define RGB_MATRIX_LED_COUNT RGBLED_NUM +# define RGB_MATRIX_LED_COUNT 82 # define WS2812_PWM_DRIVER PWMD3 // default: PWMD2 # define WS2812_PWM_CHANNEL 2 // default: 2 @@ -31,7 +30,6 @@ # define RGB_MATRIX_MAXIMUM_BRIGHTNESS 180 -# define RGBLIGHT_VAL_STEP 18 # define RGB_DISABLE_WHEN_USB_SUSPENDED true # define RGB_MATRIX_CENTER { 96, 32 } # define RGB_MATRIX_KEYPRESSES @@ -87,9 +85,6 @@ #ifdef RGBLIGHT_ENABLE -# define RGBLED_NUM 82 -# define RGB_MATRIX_LED_COUNT RGBLED_NUM - # define WS2812_PWM_DRIVER PWMD3 // default: PWMD2 # define WS2812_PWM_CHANNEL 2 // default: 2 # define WS2812_PWM_PAL_MODE 2 // Pin "alternate function", see the respective datasheet for the appropriate values for your MCU. default: 2 diff --git a/keyboards/yandrstudio/nz64/info.json b/keyboards/yandrstudio/nz64/info.json index 6c054018d1..332f940305 100644 --- a/keyboards/yandrstudio/nz64/info.json +++ b/keyboards/yandrstudio/nz64/info.json @@ -4,6 +4,9 @@ "pid": "0xAAAF", "device_version": "1.0.0" }, + "rgblight": { + "led_count": 82 + }, "ws2812": { "pin": "A7", "driver": "pwm" diff --git a/keyboards/yandrstudio/nz67v2/config.h b/keyboards/yandrstudio/nz67v2/config.h index 860ee45381..dba2f77395 100644 --- a/keyboards/yandrstudio/nz67v2/config.h +++ b/keyboards/yandrstudio/nz67v2/config.h @@ -16,16 +16,12 @@ #pragma once -#define TAP_CODE_DELAY 15 - /* RGB Matrix */ #ifdef RGB_MATRIX_ENABLE -# define RGBLED_NUM 86 -# define RGB_MATRIX_LED_COUNT RGBLED_NUM +# define RGB_MATRIX_LED_COUNT 86 # define RGB_MATRIX_MAXIMUM_BRIGHTNESS 180 -# define RGBLIGHT_VAL_STEP 5 # define RGB_DISABLE_WHEN_USB_SUSPENDED # define RGB_MATRIX_KEYPRESSES # define RGB_MATRIX_FRAMEBUFFER_EFFECTS diff --git a/keyboards/yandrstudio/nz67v2/info.json b/keyboards/yandrstudio/nz67v2/info.json index 6149c998f7..89af204fc3 100644 --- a/keyboards/yandrstudio/nz67v2/info.json +++ b/keyboards/yandrstudio/nz67v2/info.json @@ -23,6 +23,9 @@ {"pin_a": "A9", "pin_b": "A10"} ] }, + "qmk": { + "tap_keycode_delay": 15 + }, "layouts": { "LAYOUT_all": { "layout": [ @@ -40,10 +43,8 @@ {"matrix": [0, 11], "x": 11, "y": 0.5}, {"matrix": [0, 12], "x": 12, "y": 0.5}, {"matrix": [0, 13], "x": 13, "y": 0.5, "w": 2}, - {"matrix": [4, 4], "x": 16, "y": 0}, {"matrix": [0, 14], "x": 15, "y": 0.5}, - {"matrix": [4, 6], "x": 16, "y": 1}, {"matrix": [1, 0], "x": 0, "y": 1.5, "w": 1.5}, {"matrix": [1, 1], "x": 1.5, "y": 1.5}, {"matrix": [1, 2], "x": 2.5, "y": 1.5}, diff --git a/keyboards/yandrstudio/nz67v2/keymaps/default/keymap.c b/keyboards/yandrstudio/nz67v2/keymaps/default/keymap.c index 7ed06c9ec5..f1069c37db 100644 --- a/keyboards/yandrstudio/nz67v2/keymaps/default/keymap.c +++ b/keyboards/yandrstudio/nz67v2/keymaps/default/keymap.c @@ -18,16 +18,15 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { [0] = LAYOUT_all( - KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_VOLD, KC_HOME, KC_VOLU, + KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_HOME, KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_END, KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, KC_PGUP, KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_UP, KC_PGDN, KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_SPC, KC_SPC, KC_RALT, MO(1), KC_LEFT, KC_DOWN, KC_RGHT), [1] = LAYOUT_all( - KC_GRV, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_DEL, KC_TRNS, KC_TRNS, KC_TRNS, + KC_GRV, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_DEL, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, URGB_K, RGB_HUI, RGB_HUD, RGB_SAI, RGB_SAD, KC_TRNS, KC_TRNS, KC_TRNS, GUI_TOG, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, RGB_TOG, RGB_MOD, RGB_RMOD, RGB_VAI, RGB_VAD, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS) }; - diff --git a/keyboards/yandrstudio/nz67v2/keymaps/via/keymap.c b/keyboards/yandrstudio/nz67v2/keymaps/via/keymap.c index 56a083d444..52e0d15c8e 100644 --- a/keyboards/yandrstudio/nz67v2/keymaps/via/keymap.c +++ b/keyboards/yandrstudio/nz67v2/keymaps/via/keymap.c @@ -18,59 +18,36 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { [0] = LAYOUT_all( - KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_VOLD, KC_HOME, KC_VOLU, + KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_HOME, KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_END, KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, KC_PGUP, KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_UP, KC_PGDN, KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_SPC, KC_SPC, KC_RALT, MO(1), KC_LEFT, KC_DOWN, KC_RGHT), [1] = LAYOUT_all( - KC_GRV, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_DEL, KC_TRNS, KC_TRNS, KC_TRNS, + KC_GRV, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_DEL, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, URGB_K, RGB_HUI, RGB_HUD, RGB_SAI, RGB_SAD, KC_TRNS, KC_TRNS, KC_TRNS, GUI_TOG, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, RGB_TOG, RGB_MOD, RGB_RMOD, RGB_VAI, RGB_VAD, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS), [2] = LAYOUT_all( - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS), [3] = LAYOUT_all( - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS) }; -#ifdef ENCODER_ENABLE -keyevent_t encoder1_ccw = {.key = (keypos_t){.row = 4, .col = 4}, .pressed = false, .type = KEY_EVENT}; - -keyevent_t encoder1_cw = {.key = (keypos_t){.row = 4, .col = 6}, .pressed = false, .type = KEY_EVENT}; -void matrix_scan_user(void) { - if (encoder1_ccw.pressed) { - encoder1_ccw.pressed = false; - encoder1_ccw.time = timer_read(); - action_exec(encoder1_ccw); - } - - if (encoder1_cw.pressed) { - encoder1_cw.pressed = false; - encoder1_cw.time = timer_read(); - action_exec(encoder1_cw); - } -} - -bool encoder_update_user(uint8_t index, bool clockwise) { - if (clockwise) { - encoder1_cw.pressed = true; - encoder1_cw.time = timer_read(); - action_exec(encoder1_cw); - } else { - encoder1_ccw.pressed = true; - encoder1_ccw.time = timer_read(); - action_exec(encoder1_ccw); - } - return true; -} +#ifdef ENCODER_MAP_ENABLE +const uint16_t PROGMEM encoder_map[][NUM_ENCODERS][NUM_DIRECTIONS] = { + [0] = { ENCODER_CCW_CW(KC_VOLD, KC_VOLU) }, + [1] = { ENCODER_CCW_CW(_______, _______) }, + [2] = { ENCODER_CCW_CW(_______, _______) }, + [3] = { ENCODER_CCW_CW(_______, _______) }, +}; #endif diff --git a/keyboards/yandrstudio/tg67/config.h b/keyboards/yandrstudio/tg67/config.h index 373b5bcbf9..3386838c74 100644 --- a/keyboards/yandrstudio/tg67/config.h +++ b/keyboards/yandrstudio/tg67/config.h @@ -18,11 +18,9 @@ /* RGB Matrix */ #ifdef RGB_MATRIX_ENABLE -# define RGBLED_NUM 69 -# define RGB_MATRIX_LED_COUNT RGBLED_NUM +# define RGB_MATRIX_LED_COUNT 69 # define RGB_MATRIX_MAXIMUM_BRIGHTNESS 250 -# define RGBLIGHT_VAL_STEP 5 # define RGB_DISABLE_WHEN_USB_SUSPENDED # define RGB_MATRIX_KEYPRESSES # define RGB_MATRIX_FRAMEBUFFER_EFFECTS diff --git a/keyboards/yandrstudio/yr6095/config.h b/keyboards/yandrstudio/yr6095/config.h index 74c8f4adce..40c148636f 100644 --- a/keyboards/yandrstudio/yr6095/config.h +++ b/keyboards/yandrstudio/yr6095/config.h @@ -17,8 +17,6 @@ #ifdef RGBLIGHT_ENABLE -# define RGBLED_NUM 1 - # define RGBLIGHT_LAYERS # define RGBLIGHT_LAYERS_OVERRIDE_RGB_OFF # define RGBLIGHT_LAYERS_RETAIN_VAL diff --git a/keyboards/yandrstudio/yr6095/info.json b/keyboards/yandrstudio/yr6095/info.json index 3ec826052c..77432a994c 100644 --- a/keyboards/yandrstudio/yr6095/info.json +++ b/keyboards/yandrstudio/yr6095/info.json @@ -6,6 +6,9 @@ "pid": "0xAA0C", "device_version": "1.0.0" }, + "rgblight": { + "led_count": 1 + }, "ws2812": { "pin": "B5", "driver": "pwm" diff --git a/keyboards/yandrstudio/yr80/config.h b/keyboards/yandrstudio/yr80/config.h index 0e8602dee9..d2f6228308 100644 --- a/keyboards/yandrstudio/yr80/config.h +++ b/keyboards/yandrstudio/yr80/config.h @@ -18,9 +18,6 @@ #ifdef RGBLIGHT_ENABLE -# define RGBLED_NUM 1 -# define DRIVER_LED_TOTAL RGBLED_NUM - # define RGBLIGHT_LAYERS # define RGBLIGHT_LAYERS_OVERRIDE_RGB_OFF # define RGBLIGHT_LAYERS_RETAIN_VAL diff --git a/keyboards/yandrstudio/yr80/info.json b/keyboards/yandrstudio/yr80/info.json index 7faaa482ef..3db1d88e26 100644 --- a/keyboards/yandrstudio/yr80/info.json +++ b/keyboards/yandrstudio/yr80/info.json @@ -6,6 +6,9 @@ "pid": "0xAA0D", "device_version": "1.0.0" }, + "rgblight": { + "led_count": 1 + }, "ws2812": { "pin": "A7", "driver": "pwm" diff --git a/keyboards/yanghu/unicorne/config.h b/keyboards/yanghu/unicorne/config.h index 8a4ce9ec49..f443f8c554 100644 --- a/keyboards/yanghu/unicorne/config.h +++ b/keyboards/yanghu/unicorne/config.h @@ -29,8 +29,6 @@ #define AUDIO_PWM_CHANNEL 1 /* RGB LED */ -#define RGBLED_NUM 8 -#define RGB_MATRIX_LED_COUNT RGBLED_NUM #define RGBLIGHT_EFFECT_BREATHING #define RGBLIGHT_EFFECT_RAINBOW_MOOD #define RGBLIGHT_EFFECT_RAINBOW_SWIRL diff --git a/keyboards/yanghu/unicorne/info.json b/keyboards/yanghu/unicorne/info.json index 52a703d219..9a6f4c9e80 100644 --- a/keyboards/yanghu/unicorne/info.json +++ b/keyboards/yanghu/unicorne/info.json @@ -8,6 +8,9 @@ "pid": "0x0204", "device_version": "0.0.1" }, + "rgblight": { + "led_count": 8 + }, "ws2812": { "pin": "B1", "driver": "pwm" diff --git a/keyboards/ydkb/chili/config.h b/keyboards/ydkb/chili/config.h index dd6631f545..03c8bceba0 100644 --- a/keyboards/ydkb/chili/config.h +++ b/keyboards/ydkb/chili/config.h @@ -29,10 +29,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #define RGBLIGHT_EFFECT_RGB_TEST #define RGBLIGHT_EFFECT_ALTERNATING #define RGBLIGHT_EFFECT_TWINKLE -#define RGBLED_NUM 30 // Number of LEDs -#define RGBLIGHT_HUE_STEP 5 -#define RGBLIGHT_SAT_STEP 10 -#define RGBLIGHT_VAL_STEP 10 /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ #define LOCKING_SUPPORT_ENABLE diff --git a/keyboards/ydkb/chili/info.json b/keyboards/ydkb/chili/info.json index 998f3073e1..99de9fab91 100644 --- a/keyboards/ydkb/chili/info.json +++ b/keyboards/ydkb/chili/info.json @@ -17,6 +17,12 @@ "pin": "B7", "breathing": true }, + "rgblight": { + "hue_steps": 5, + "saturation_steps": 10, + "brightness_steps": 10, + "led_count": 30 + }, "ws2812": { "pin": "B3" }, diff --git a/keyboards/ydkb/grape/config.h b/keyboards/ydkb/grape/config.h index 0d488de5d4..c0bea85aba 100644 --- a/keyboards/ydkb/grape/config.h +++ b/keyboards/ydkb/grape/config.h @@ -24,10 +24,6 @@ #define SN74X138_ADDRESS_PINS { D2, D1, D0 } -#ifdef RGBLIGHT_ENABLE -#define RGBLED_NUM 4 -#endif - /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ #define LOCKING_SUPPORT_ENABLE /* Locking resynchronize hack */ diff --git a/keyboards/ydkb/grape/info.json b/keyboards/ydkb/grape/info.json index 17d2f88773..32c9914bdb 100644 --- a/keyboards/ydkb/grape/info.json +++ b/keyboards/ydkb/grape/info.json @@ -12,6 +12,9 @@ "pin": "B7", "breathing": true }, + "rgblight": { + "led_count": 4 + }, "ws2812": { "pin": "E6" }, diff --git a/keyboards/ydkb/yd68/config.h b/keyboards/ydkb/yd68/config.h index 9914803853..44f4a2679b 100644 --- a/keyboards/ydkb/yd68/config.h +++ b/keyboards/ydkb/yd68/config.h @@ -27,10 +27,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #define RGBLIGHT_EFFECT_RGB_TEST #define RGBLIGHT_EFFECT_ALTERNATING #define RGBLIGHT_EFFECT_TWINKLE -#define RGBLED_NUM 10 -#define RGBLIGHT_HUE_STEP 8 -#define RGBLIGHT_SAT_STEP 8 -#define RGBLIGHT_VAL_STEP 8 /* * Feature disable options diff --git a/keyboards/ydkb/yd68/info.json b/keyboards/ydkb/yd68/info.json index b552f9e2cf..87cc06b223 100644 --- a/keyboards/ydkb/yd68/info.json +++ b/keyboards/ydkb/yd68/info.json @@ -17,6 +17,11 @@ "caps_lock": "D4", "on_state": 0 }, + "rgblight": { + "saturation_steps": 8, + "brightness_steps": 8, + "led_count": 10 + }, "ws2812": { "pin": "B3" }, diff --git a/keyboards/yeehaw/config.h b/keyboards/yeehaw/config.h index 273fd9fca8..cd302bb87b 100644 --- a/keyboards/yeehaw/config.h +++ b/keyboards/yeehaw/config.h @@ -15,11 +15,6 @@ */ #pragma once - #define RGBLED_NUM 7 - #define RGBLIGHT_HUE_STEP 8 - #define RGBLIGHT_SAT_STEP 8 - #define RGBLIGHT_VAL_STEP 8 - #define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */ #define RGBLIGHT_EFFECT_BREATHING #define RGBLIGHT_EFFECT_RAINBOW_MOOD #define RGBLIGHT_EFFECT_RAINBOW_SWIRL diff --git a/keyboards/yeehaw/info.json b/keyboards/yeehaw/info.json index 1bcda0bcda..edebbea5ce 100644 --- a/keyboards/yeehaw/info.json +++ b/keyboards/yeehaw/info.json @@ -13,6 +13,12 @@ {"pin_a": "D1", "pin_b": "D0"} ] }, + "rgblight": { + "saturation_steps": 8, + "brightness_steps": 8, + "led_count": 7, + "sleep": true + }, "ws2812": { "pin": "B2" }, diff --git a/keyboards/ymdk/bface/config.h b/keyboards/ymdk/bface/config.h index 08303c4b13..e3bc667216 100644 --- a/keyboards/ymdk/bface/config.h +++ b/keyboards/ymdk/bface/config.h @@ -27,7 +27,3 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #define RGBLIGHT_EFFECT_RGB_TEST #define RGBLIGHT_EFFECT_ALTERNATING #define RGBLIGHT_EFFECT_TWINKLE -#define RGBLED_NUM 12 -#define RGBLIGHT_HUE_STEP 8 -#define RGBLIGHT_SAT_STEP 8 -#define RGBLIGHT_VAL_STEP 8 diff --git a/keyboards/ymdk/bface/info.json b/keyboards/ymdk/bface/info.json index 09441c5dbd..640abc28e7 100644 --- a/keyboards/ymdk/bface/info.json +++ b/keyboards/ymdk/bface/info.json @@ -17,6 +17,11 @@ "pin": "D4", "levels": 6 }, + "rgblight": { + "saturation_steps": 8, + "brightness_steps": 8, + "led_count": 12 + }, "ws2812": { "driver": "i2c" }, diff --git a/keyboards/ymdk/id75/rules.mk b/keyboards/ymdk/id75/rules.mk index 47220e8853..edbd3dd718 100644 --- a/keyboards/ymdk/id75/rules.mk +++ b/keyboards/ymdk/id75/rules.mk @@ -4,5 +4,3 @@ MCU_LDSCRIPT = STM32F103xB # Wildcard to allow APM32 MCU DFU_SUFFIX_ARGS = -p FFFF -v FFFF -# Enter lower-power sleep mode when on the ChibiOS idle thread -OPT_DEFS += -DCORTEX_ENABLE_WFI_IDLE=TRUE diff --git a/keyboards/ymdk/melody96/config.h b/keyboards/ymdk/melody96/config.h index a62c64fb37..d702489ee7 100644 --- a/keyboards/ymdk/melody96/config.h +++ b/keyboards/ymdk/melody96/config.h @@ -16,7 +16,3 @@ #define RGBLIGHT_EFFECT_RGB_TEST #define RGBLIGHT_EFFECT_ALTERNATING #define RGBLIGHT_EFFECT_TWINKLE -#define RGBLED_NUM 18 -#define RGBLIGHT_HUE_STEP 8 -#define RGBLIGHT_SAT_STEP 8 -#define RGBLIGHT_VAL_STEP 8 diff --git a/keyboards/ymdk/melody96/info.json b/keyboards/ymdk/melody96/info.json index 83c45eaa6b..6df82fdd45 100644 --- a/keyboards/ymdk/melody96/info.json +++ b/keyboards/ymdk/melody96/info.json @@ -17,6 +17,11 @@ "pin": "B6", "levels": 5 }, + "rgblight": { + "saturation_steps": 8, + "brightness_steps": 8, + "led_count": 18 + }, "ws2812": { "pin": "E2" }, diff --git a/keyboards/ymdk/np21/config.h b/keyboards/ymdk/np21/config.h index 6ad2d4bdf0..5254378a3f 100644 --- a/keyboards/ymdk/np21/config.h +++ b/keyboards/ymdk/np21/config.h @@ -17,11 +17,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #pragma once -#define RGBLED_NUM 5 -//#define RGBLIGHT_HUE_STEP 8 -//#define RGBLIGHT_SAT_STEP 8 -//#define RGBLIGHT_VAL_STEP 8 -//#define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */ #define RGBLIGHT_EFFECT_BREATHING #define RGBLIGHT_EFFECT_RAINBOW_MOOD #define RGBLIGHT_EFFECT_RAINBOW_SWIRL diff --git a/keyboards/ymdk/np21/info.json b/keyboards/ymdk/np21/info.json index 62fdf7e20c..0e9f8a7a54 100644 --- a/keyboards/ymdk/np21/info.json +++ b/keyboards/ymdk/np21/info.json @@ -18,6 +18,9 @@ "levels": 12, "breathing": true }, + "rgblight": { + "led_count": 5 + }, "ws2812": { "driver": "i2c" }, diff --git a/keyboards/ymdk/np24/u4rgb6/config.h b/keyboards/ymdk/np24/u4rgb6/config.h index 0f6e31d199..d644169039 100644 --- a/keyboards/ymdk/np24/u4rgb6/config.h +++ b/keyboards/ymdk/np24/u4rgb6/config.h @@ -15,7 +15,6 @@ */ #pragma once -# define RGBLED_NUM 6 #define RGBLIGHT_EFFECT_BREATHING #define RGBLIGHT_EFFECT_RAINBOW_MOOD #define RGBLIGHT_EFFECT_RAINBOW_SWIRL diff --git a/keyboards/ymdk/np24/u4rgb6/info.json b/keyboards/ymdk/np24/u4rgb6/info.json index 285baacdac..fcd7bf516d 100644 --- a/keyboards/ymdk/np24/u4rgb6/info.json +++ b/keyboards/ymdk/np24/u4rgb6/info.json @@ -16,6 +16,9 @@ "pin": "B7", "levels": 31 }, + "rgblight": { + "led_count": 6 + }, "ws2812": { "pin": "E2" }, diff --git a/keyboards/ymdk/sp64/config.h b/keyboards/ymdk/sp64/config.h index 35e9f6b5a6..057249b879 100644 --- a/keyboards/ymdk/sp64/config.h +++ b/keyboards/ymdk/sp64/config.h @@ -24,11 +24,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #define RIGHT_HALF /* RGB underglow */ -#define RGBLED_NUM 12 -#define RGBLIGHT_HUE_STEP 8 -#define RGBLIGHT_SAT_STEP 8 -#define RGBLIGHT_VAL_STEP 8 -#define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */ #define RGBLIGHT_EFFECT_BREATHING #define RGBLIGHT_EFFECT_RAINBOW_MOOD #define RGBLIGHT_EFFECT_RAINBOW_SWIRL diff --git a/keyboards/ymdk/sp64/info.json b/keyboards/ymdk/sp64/info.json index dff795f0b9..b73093c58d 100644 --- a/keyboards/ymdk/sp64/info.json +++ b/keyboards/ymdk/sp64/info.json @@ -17,7 +17,11 @@ "driver": "i2c" }, "rgblight": { - "max_brightness": 250 + "saturation_steps": 8, + "brightness_steps": 8, + "led_count": 12, + "max_brightness": 250, + "sleep": true }, "processor": "atmega32a", "bootloader": "bootloadhid", diff --git a/keyboards/ymdk/wings/config.h b/keyboards/ymdk/wings/config.h index c8cfa14161..9b6e11cb2b 100644 --- a/keyboards/ymdk/wings/config.h +++ b/keyboards/ymdk/wings/config.h @@ -15,7 +15,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #pragma once -#define RGBLED_NUM 14 #define RGBLIGHT_EFFECT_BREATHING #define RGBLIGHT_EFFECT_RAINBOW_MOOD #define RGBLIGHT_EFFECT_RAINBOW_SWIRL @@ -26,7 +25,3 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #define RGBLIGHT_EFFECT_RGB_TEST #define RGBLIGHT_EFFECT_ALTERNATING #define RGBLIGHT_EFFECT_TWINKLE -#define RGBLIGHT_HUE_STEP 8 -#define RGBLIGHT_SAT_STEP 8 -#define RGBLIGHT_VAL_STEP 8 -#define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */ diff --git a/keyboards/ymdk/wings/info.json b/keyboards/ymdk/wings/info.json index 6a136f90d3..cd239f5669 100644 --- a/keyboards/ymdk/wings/info.json +++ b/keyboards/ymdk/wings/info.json @@ -17,6 +17,12 @@ "pin": "B6", "levels": 5 }, + "rgblight": { + "saturation_steps": 8, + "brightness_steps": 8, + "led_count": 14, + "sleep": true + }, "ws2812": { "pin": "E2" }, diff --git a/keyboards/ymdk/wingshs/config.h b/keyboards/ymdk/wingshs/config.h index fe80a59fe5..8114e962de 100644 --- a/keyboards/ymdk/wingshs/config.h +++ b/keyboards/ymdk/wingshs/config.h @@ -13,7 +13,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #pragma once -#define RGBLED_NUM 80 #define RGBLIGHT_EFFECT_BREATHING #define RGBLIGHT_EFFECT_RAINBOW_MOOD #define RGBLIGHT_EFFECT_RAINBOW_SWIRL @@ -24,7 +23,3 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #define RGBLIGHT_EFFECT_RGB_TEST #define RGBLIGHT_EFFECT_ALTERNATING #define RGBLIGHT_EFFECT_TWINKLE -#define RGBLIGHT_HUE_STEP 8 -#define RGBLIGHT_SAT_STEP 8 -#define RGBLIGHT_VAL_STEP 8 -#define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */ diff --git a/keyboards/ymdk/wingshs/info.json b/keyboards/ymdk/wingshs/info.json index 4c536e7ead..d8e4d83266 100644 --- a/keyboards/ymdk/wingshs/info.json +++ b/keyboards/ymdk/wingshs/info.json @@ -25,7 +25,11 @@ "pin": "E2" }, "rgblight": { - "max_brightness": 160 + "saturation_steps": 8, + "brightness_steps": 8, + "led_count": 80, + "max_brightness": 160, + "sleep": true }, "processor": "atmega32u4", "bootloader": "atmel-dfu", diff --git a/keyboards/ymdk/yd60mq/12led/config.h b/keyboards/ymdk/yd60mq/12led/config.h deleted file mode 100644 index edea795f78..0000000000 --- a/keyboards/ymdk/yd60mq/12led/config.h +++ /dev/null @@ -1,3 +0,0 @@ -#pragma once - -#define RGBLED_NUM 12 diff --git a/keyboards/ymdk/yd60mq/12led/info.json b/keyboards/ymdk/yd60mq/12led/info.json index 90ac25f360..6bc508727e 100644 --- a/keyboards/ymdk/yd60mq/12led/info.json +++ b/keyboards/ymdk/yd60mq/12led/info.json @@ -1,5 +1,10 @@ { "usb": { "device_version": "0.0.1" + }, + "rgblight": { + "saturation_steps": 8, + "brightness_steps": 8, + "led_count": 12 } } diff --git a/keyboards/ymdk/yd60mq/16led/config.h b/keyboards/ymdk/yd60mq/16led/config.h deleted file mode 100644 index 00d3fcfc8c..0000000000 --- a/keyboards/ymdk/yd60mq/16led/config.h +++ /dev/null @@ -1,3 +0,0 @@ -#pragma once - -#define RGBLED_NUM 16 diff --git a/keyboards/ymdk/yd60mq/16led/info.json b/keyboards/ymdk/yd60mq/16led/info.json index e557e4d307..905c6053ff 100644 --- a/keyboards/ymdk/yd60mq/16led/info.json +++ b/keyboards/ymdk/yd60mq/16led/info.json @@ -1,5 +1,10 @@ { "usb": { "device_version": "0.0.2" + }, + "rgblight": { + "saturation_steps": 8, + "brightness_steps": 8, + "led_count": 16 } } diff --git a/keyboards/ymdk/yd60mq/config.h b/keyboards/ymdk/yd60mq/config.h index 135548b4ff..d374b7ef5e 100644 --- a/keyboards/ymdk/yd60mq/config.h +++ b/keyboards/ymdk/yd60mq/config.h @@ -15,7 +15,3 @@ #define RGBLIGHT_EFFECT_RGB_TEST #define RGBLIGHT_EFFECT_ALTERNATING #define RGBLIGHT_EFFECT_TWINKLE -#define RGBLIGHT_HUE_STEP 8 -#define RGBLIGHT_SAT_STEP 8 -#define RGBLIGHT_VAL_STEP 8 -// RGBLED_NUM is defined in revisions diff --git a/keyboards/ymdk/ym68/config.h b/keyboards/ymdk/ym68/config.h index b35b9d3142..8bb96c992f 100644 --- a/keyboards/ymdk/ym68/config.h +++ b/keyboards/ymdk/ym68/config.h @@ -17,11 +17,6 @@ #pragma once #if defined(RGBLIGHT_ENABLE) - #define RGBLED_NUM 20 - #define RGBLIGHT_HUE_STEP 8 - #define RGBLIGHT_SAT_STEP 8 - #define RGBLIGHT_VAL_STEP 8 - #define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */ #define RGBLIGHT_EFFECT_BREATHING #define RGBLIGHT_EFFECT_RAINBOW_MOOD #define RGBLIGHT_EFFECT_RAINBOW_SWIRL diff --git a/keyboards/ymdk/ym68/info.json b/keyboards/ymdk/ym68/info.json index 3daab4072a..5b1af50529 100644 --- a/keyboards/ymdk/ym68/info.json +++ b/keyboards/ymdk/ym68/info.json @@ -18,6 +18,12 @@ "levels": 5, "breathing": true }, + "rgblight": { + "saturation_steps": 8, + "brightness_steps": 8, + "led_count": 20, + "sleep": true + }, "ws2812": { "pin": "E2" }, diff --git a/keyboards/ymdk/ymd21/v2/config.h b/keyboards/ymdk/ymd21/v2/config.h index 955f702a8d..073441c9c0 100644 --- a/keyboards/ymdk/ymd21/v2/config.h +++ b/keyboards/ymdk/ymd21/v2/config.h @@ -17,11 +17,6 @@ #pragma once #if defined(RGBLIGHT_ENABLE) - #define RGBLED_NUM 8 - #define RGBLIGHT_HUE_STEP 8 - #define RGBLIGHT_SAT_STEP 8 - #define RGBLIGHT_VAL_STEP 8 - #define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */ #define RGBLIGHT_EFFECT_BREATHING #define RGBLIGHT_EFFECT_RAINBOW_MOOD #define RGBLIGHT_EFFECT_RAINBOW_SWIRL diff --git a/keyboards/ymdk/ymd21/v2/info.json b/keyboards/ymdk/ymd21/v2/info.json index 18b0ef9e7b..153fb72a4c 100644 --- a/keyboards/ymdk/ymd21/v2/info.json +++ b/keyboards/ymdk/ymd21/v2/info.json @@ -21,7 +21,11 @@ "pin": "E2" }, "rgblight": { - "max_brightness": 180 + "saturation_steps": 8, + "brightness_steps": 8, + "led_count": 8, + "max_brightness": 180, + "sleep": true }, "processor": "atmega32u4", "bootloader": "atmel-dfu", diff --git a/keyboards/ymdk/ymd40/v2/config.h b/keyboards/ymdk/ymd40/v2/config.h index 1a061e530b..8bb96c992f 100644 --- a/keyboards/ymdk/ymd40/v2/config.h +++ b/keyboards/ymdk/ymd40/v2/config.h @@ -17,11 +17,6 @@ #pragma once #if defined(RGBLIGHT_ENABLE) - #define RGBLED_NUM 8 - #define RGBLIGHT_HUE_STEP 8 - #define RGBLIGHT_SAT_STEP 8 - #define RGBLIGHT_VAL_STEP 8 - #define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */ #define RGBLIGHT_EFFECT_BREATHING #define RGBLIGHT_EFFECT_RAINBOW_MOOD #define RGBLIGHT_EFFECT_RAINBOW_SWIRL diff --git a/keyboards/ymdk/ymd40/v2/info.json b/keyboards/ymdk/ymd40/v2/info.json index ab9648ff46..91193aa9fa 100644 --- a/keyboards/ymdk/ymd40/v2/info.json +++ b/keyboards/ymdk/ymd40/v2/info.json @@ -21,7 +21,11 @@ "pin": "E2" }, "rgblight": { - "max_brightness": 150 + "saturation_steps": 8, + "brightness_steps": 8, + "led_count": 8, + "max_brightness": 150, + "sleep": true }, "processor": "atmega32u4", "bootloader": "atmel-dfu", diff --git a/keyboards/ymdk/ymd67/config.h b/keyboards/ymdk/ymd67/config.h index 8a3612b8a5..d374b7ef5e 100644 --- a/keyboards/ymdk/ymd67/config.h +++ b/keyboards/ymdk/ymd67/config.h @@ -15,7 +15,3 @@ #define RGBLIGHT_EFFECT_RGB_TEST #define RGBLIGHT_EFFECT_ALTERNATING #define RGBLIGHT_EFFECT_TWINKLE -#define RGBLED_NUM 12 -#define RGBLIGHT_HUE_STEP 8 -#define RGBLIGHT_SAT_STEP 8 -#define RGBLIGHT_VAL_STEP 8 diff --git a/keyboards/ymdk/ymd67/info.json b/keyboards/ymdk/ymd67/info.json index 39801fe04e..c5e3a45519 100644 --- a/keyboards/ymdk/ymd67/info.json +++ b/keyboards/ymdk/ymd67/info.json @@ -17,6 +17,11 @@ "pin": "B7", "levels": 5 }, + "rgblight": { + "saturation_steps": 8, + "brightness_steps": 8, + "led_count": 12 + }, "ws2812": { "pin": "E2" }, diff --git a/keyboards/ymdk/ymd75/config.h b/keyboards/ymdk/ymd75/config.h index 32bdab2478..4f0c47b20b 100644 --- a/keyboards/ymdk/ymd75/config.h +++ b/keyboards/ymdk/ymd75/config.h @@ -19,7 +19,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #pragma once -#define RGBLED_NUM 16 #define RGBLIGHT_EFFECT_BREATHING #define RGBLIGHT_EFFECT_RAINBOW_MOOD #define RGBLIGHT_EFFECT_RAINBOW_SWIRL @@ -30,7 +29,4 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #define RGBLIGHT_EFFECT_RGB_TEST #define RGBLIGHT_EFFECT_ALTERNATING #define RGBLIGHT_EFFECT_TWINKLE -#define RGBLIGHT_HUE_STEP 12 -#define RGBLIGHT_SAT_STEP 15 -#define RGBLIGHT_VAL_STEP 18 #define DYNAMIC_KEYMAP_LAYER_COUNT 3 diff --git a/keyboards/ymdk/ymd75/info.json b/keyboards/ymdk/ymd75/info.json index 930139be90..a19586fcc0 100644 --- a/keyboards/ymdk/ymd75/info.json +++ b/keyboards/ymdk/ymd75/info.json @@ -7,6 +7,12 @@ "vid": "0x20A0", "pid": "0x422D" }, + "rgblight": { + "hue_steps": 12, + "saturation_steps": 15, + "brightness_steps": 18, + "led_count": 16 + }, "ws2812": { "pin": "E2" }, diff --git a/keyboards/ymdk/ymd96/config.h b/keyboards/ymdk/ymd96/config.h index ecb03b5917..5570dc0534 100644 --- a/keyboards/ymdk/ymd96/config.h +++ b/keyboards/ymdk/ymd96/config.h @@ -19,10 +19,7 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #pragma once -#define TAPPING_TOGGLE 3 - /* RGB underglow */ -#define RGBLED_NUM 18 #define RGBLIGHT_EFFECT_BREATHING #define RGBLIGHT_EFFECT_RAINBOW_MOOD #define RGBLIGHT_EFFECT_RAINBOW_SWIRL @@ -33,4 +30,3 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #define RGBLIGHT_EFFECT_RGB_TEST #define RGBLIGHT_EFFECT_ALTERNATING #define RGBLIGHT_EFFECT_TWINKLE -/*#define RGBLIGHT_VAL_STEP 20*/ diff --git a/keyboards/ymdk/ymd96/info.json b/keyboards/ymdk/ymd96/info.json index f603439d39..6d30a2bab7 100644 --- a/keyboards/ymdk/ymd96/info.json +++ b/keyboards/ymdk/ymd96/info.json @@ -19,6 +19,9 @@ "levels": 12, "breathing": true }, + "rgblight": { + "led_count": 18 + }, "ws2812": { "driver": "i2c" }, @@ -29,6 +32,9 @@ }, "processor": "atmega32a", "bootloader": "bootloadhid", + "tapping": { + "toggle": 3 + }, "layouts": { "LAYOUT_default": { "layout": [ diff --git a/keyboards/yoichiro/lunakey_macro/config.h b/keyboards/yoichiro/lunakey_macro/config.h index ec059fd01e..7f39031815 100644 --- a/keyboards/yoichiro/lunakey_macro/config.h +++ b/keyboards/yoichiro/lunakey_macro/config.h @@ -30,11 +30,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. /* Layer Count */ #define DYNAMIC_KEYMAP_LAYER_COUNT 3 - #define RGBLED_NUM 5 - #define RGBLIGHT_HUE_STEP 8 - #define RGBLIGHT_SAT_STEP 8 - #define RGBLIGHT_VAL_STEP 8 - #define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */ // #define RGBLIGHT_LAYERS #define RGBLIGHT_EFFECT_BREATHING #define RGBLIGHT_EFFECT_RAINBOW_MOOD diff --git a/keyboards/yoichiro/lunakey_macro/info.json b/keyboards/yoichiro/lunakey_macro/info.json index f892a9db7f..5853720c48 100644 --- a/keyboards/yoichiro/lunakey_macro/info.json +++ b/keyboards/yoichiro/lunakey_macro/info.json @@ -13,6 +13,12 @@ "rows": ["E6", "B4", "B5"] }, "diode_direction": "COL2ROW", + "rgblight": { + "saturation_steps": 8, + "brightness_steps": 8, + "led_count": 5, + "sleep": true + }, "ws2812": { "pin": "D3" }, diff --git a/keyboards/yoichiro/lunakey_mini/config.h b/keyboards/yoichiro/lunakey_mini/config.h index 8040e082a3..8e449b623f 100644 --- a/keyboards/yoichiro/lunakey_mini/config.h +++ b/keyboards/yoichiro/lunakey_mini/config.h @@ -17,15 +17,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #pragma once - #define RGBLED_NUM 12 - #define RGBLIGHT_SPLIT - #define RGBLED_SPLIT { 6, 6 } - #define RGBLIGHT_LED_MAP { 0, 1, 2, 3, 4, 5, \ - 11, 10, 9, 8, 7, 6 } - #define RGBLIGHT_HUE_STEP 8 - #define RGBLIGHT_SAT_STEP 8 - #define RGBLIGHT_VAL_STEP 8 - #define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */ #define RGBLIGHT_EFFECT_BREATHING #define RGBLIGHT_EFFECT_RAINBOW_MOOD #define RGBLIGHT_EFFECT_RAINBOW_SWIRL diff --git a/keyboards/yoichiro/lunakey_mini/info.json b/keyboards/yoichiro/lunakey_mini/info.json index 1347f73cb0..4d1af67914 100644 --- a/keyboards/yoichiro/lunakey_mini/info.json +++ b/keyboards/yoichiro/lunakey_mini/info.json @@ -16,6 +16,14 @@ "split": { "soft_serial_pin": "D2" }, + "rgblight": { + "saturation_steps": 8, + "brightness_steps": 8, + "led_count": 12, + "sleep": true, + "led_map": [0, 1, 2, 3, 4, 5, 11, 10, 9, 8, 7, 6], + "split_count": [6, 6] + }, "ws2812": { "pin": "D3" }, diff --git a/keyboards/yoichiro/lunakey_pico/config.h b/keyboards/yoichiro/lunakey_pico/config.h index cf819293be..a95edc0358 100644 --- a/keyboards/yoichiro/lunakey_pico/config.h +++ b/keyboards/yoichiro/lunakey_pico/config.h @@ -15,9 +15,6 @@ #define WS2812_PIO_USE_PIO1 -#define RGBLIGHT_LED_MAP { 0, 1, 2, 3, 4, 5, \ - 11, 10, 9, 8, 7, 6 } - /* * Feature disable options * These options are also useful to firmware size reduction. diff --git a/keyboards/yoichiro/lunakey_pico/info.json b/keyboards/yoichiro/lunakey_pico/info.json index 2b477e726c..bf4b2a2510 100644 --- a/keyboards/yoichiro/lunakey_pico/info.json +++ b/keyboards/yoichiro/lunakey_pico/info.json @@ -26,6 +26,7 @@ }, "rgblight": { "led_count": 12, + "led_map": [0, 1, 2, 3, 4, 5, 11, 10, 9, 8, 7, 6], "sleep": true, "split": true, "split_count": [6, 6], diff --git a/keyboards/yosino58/keymaps/default/keymap.c b/keyboards/yosino58/keymaps/default/keymap.c index 45ee46f7ce..512c0ec4b1 100644 --- a/keyboards/yosino58/keymaps/default/keymap.c +++ b/keyboards/yosino58/keymaps/default/keymap.c @@ -200,8 +200,9 @@ bool oled_task_user(void) { int rowa = 0; //Set Indicator icon - if (host_keyboard_leds() & (1<<USB_LED_NUM_LOCK)) { rown = 1; } else { rown = 0; } - if (host_keyboard_leds() & (1<<USB_LED_CAPS_LOCK)) { rowc = 1; } else { rowc = 0; } + led_t led_state = host_keyboard_led_state(); + if (led_state.num_lock) { rown = 1; } else { rown = 0; } + if (led_state.caps_lock) { rowc = 1; } else { rowc = 0; } if (layer_state == L_LOWER) { rowl = 1; } if (layer_state == L_RAISE) { rowr = 1; } if (layer_state == L_ADJUST) { rowa = 1; } diff --git a/keyboards/yosino58/keymaps/sakura/keymap.c b/keyboards/yosino58/keymaps/sakura/keymap.c index 53d4f9b077..e3c8c52d7d 100644 --- a/keyboards/yosino58/keymaps/sakura/keymap.c +++ b/keyboards/yosino58/keymaps/sakura/keymap.c @@ -200,8 +200,9 @@ bool oled_task_user(void) { int rowa = 0; //Set Indicator icon - if (host_keyboard_leds() & (1<<USB_LED_NUM_LOCK)) { rown = 1; } else { rown = 0; } - if (host_keyboard_leds() & (1<<USB_LED_CAPS_LOCK)) { rowc = 1; } else { rowc = 0; } + led_t led_state = host_keyboard_led_state(); + if (led_state.num_lock) { rown = 1; } else { rown = 0; } + if (led_state.caps_lock) { rowc = 1; } else { rowc = 0; } if (layer_state == L_LOWER) { rowl = 1; } if (layer_state == L_RAISE) { rowr = 1; } if (layer_state == L_ADJUST) { rowa = 1; } diff --git a/keyboards/yosino58/lib/host_led_state_reader.c b/keyboards/yosino58/lib/host_led_state_reader.c index abcfefffb4..87249d8d4f 100644 --- a/keyboards/yosino58/lib/host_led_state_reader.c +++ b/keyboards/yosino58/lib/host_led_state_reader.c @@ -4,11 +4,11 @@ char host_led_state_str[24]; const char *read_host_led_state(void) { - uint8_t leds = host_keyboard_leds(); + led_t led_state = host_keyboard_led_state(); snprintf(host_led_state_str, sizeof(host_led_state_str), "NL:%s CL:%s SL:%s", - (leds & (1 << USB_LED_NUM_LOCK)) ? "on" : "- ", - (leds & (1 << USB_LED_CAPS_LOCK)) ? "on" : "- ", - (leds & (1 << USB_LED_SCROLL_LOCK)) ? "on" : "- "); + led_state.num_lock ? "on" : "- ", + led_state.caps_lock ? "on" : "- ", + led_state.scroll_lock ? "on" : "- "); return host_led_state_str; } diff --git a/keyboards/yosino58/rev1/config.h b/keyboards/yosino58/rev1/config.h deleted file mode 100644 index 4930c35c60..0000000000 --- a/keyboards/yosino58/rev1/config.h +++ /dev/null @@ -1,38 +0,0 @@ -/* -Copyright 2012 Jun Wako <wakojun@gmail.com> -Copyright 2015 Jack Humbert - -This program is free software: you can redistribute it and/or modify -it under the terms of the GNU General Public License as published by -the Free Software Foundation, either version 2 of the License, or -(at your option) any later version. - -This program is distributed in the hope that it will be useful, -but WITHOUT ANY WARRANTY; without even the implied warranty of -MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -GNU General Public License for more details. - -You should have received a copy of the GNU General Public License -along with this program. If not, see <http://www.gnu.org/licenses/>. -*/ - -#pragma once - -/* ws2812 RGB LED */ -#define RGBLED_NUM 12 // Number of LEDs - -/* - * Feature disable options - * These options are also useful to firmware size reduction. - */ - -/* disable debug print */ -// #define NO_DEBUG - -/* disable print */ -// #define NO_PRINT - -/* disable action features */ -//#define NO_ACTION_LAYER -//#define NO_ACTION_TAPPING -//#define NO_ACTION_ONESHOT diff --git a/keyboards/yosino58/rev1/info.json b/keyboards/yosino58/rev1/info.json index 730c82faa4..c0dc03831f 100644 --- a/keyboards/yosino58/rev1/info.json +++ b/keyboards/yosino58/rev1/info.json @@ -16,6 +16,9 @@ "split": { "soft_serial_pin": "D2" }, + "rgblight": { + "led_count": 12 + }, "ws2812": { "pin": "D3" }, diff --git a/keyboards/yushakobo/navpad/10/config.h b/keyboards/yushakobo/navpad/10/config.h index bb842334be..d73f5307d3 100644 --- a/keyboards/yushakobo/navpad/10/config.h +++ b/keyboards/yushakobo/navpad/10/config.h @@ -17,11 +17,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #pragma once -# define RGBLED_NUM 9 -# define RGBLIGHT_HUE_STEP 8 -# define RGBLIGHT_SAT_STEP 8 -# define RGBLIGHT_VAL_STEP 8 -# define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */ //# define RGBLIGHT_EFFECT_BREATHING //# define RGBLIGHT_EFFECT_RAINBOW_MOOD # define RGBLIGHT_EFFECT_RAINBOW_SWIRL @@ -38,5 +33,4 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. //#define NO_ACTION_ONESHOT #define QUICK_TAP_TERM 0 -#define TAPPING_TERM 132 #define TAPPING_LAYER_TERM 90 diff --git a/keyboards/yushakobo/navpad/10/info.json b/keyboards/yushakobo/navpad/10/info.json index 81b2740f32..640ee5b043 100644 --- a/keyboards/yushakobo/navpad/10/info.json +++ b/keyboards/yushakobo/navpad/10/info.json @@ -12,11 +12,18 @@ {"pin_a": "B5", "pin_b": "B6"} ] }, + "tapping": { + "term": 132 + }, "ws2812": { "pin": "D3" }, "rgblight": { - "max_brightness": 120 + "saturation_steps": 8, + "brightness_steps": 8, + "led_count": 9, + "max_brightness": 120, + "sleep": true }, "processor": "atmega32u4", "bootloader": "caterina" diff --git a/keyboards/yushakobo/navpad/10/rev1/config.h b/keyboards/yushakobo/navpad/10/rev1/config.h deleted file mode 100644 index d4a4e48d77..0000000000 --- a/keyboards/yushakobo/navpad/10/rev1/config.h +++ /dev/null @@ -1,20 +0,0 @@ -/* -Copyright 2021 yushakobo - -This program is free software: you can redistribute it and/or modify -it under the terms of the GNU General Public License as published by -the Free Software Foundation, either version 2 of the License, or -(at your option) any later version. - -This program is distributed in the hope that it will be useful, -but WITHOUT ANY WARRANTY; without even the implied warranty of -MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -GNU General Public License for more details. - -You should have received a copy of the GNU General Public License -along with this program. If not, see <http://www.gnu.org/licenses/>. -*/ - -#pragma once - -# define RGBLIGHT_LED_MAP { 0, 1, 2, 3, 4, 5, 6, 8, 7 } diff --git a/keyboards/yushakobo/navpad/10/rev1/info.json b/keyboards/yushakobo/navpad/10/rev1/info.json index bd20c0d0b4..a35dc4d5e9 100644 --- a/keyboards/yushakobo/navpad/10/rev1/info.json +++ b/keyboards/yushakobo/navpad/10/rev1/info.json @@ -2,6 +2,9 @@ "usb": { "device_version": "0.0.1" }, + "rgblight": { + "led_map": [0, 1, 2, 3, 4, 5, 6, 8, 7] + }, "matrix_pins": { "cols": ["F5", "F6", "B2", "B3", "B1", "F7"], "rows": ["D4", "C6", "D7", "E6", "B4", "F4"] diff --git a/keyboards/yushakobo/navpad/10_helix_r/config.h b/keyboards/yushakobo/navpad/10_helix_r/config.h index 95c70244a4..2cfce61079 100644 --- a/keyboards/yushakobo/navpad/10_helix_r/config.h +++ b/keyboards/yushakobo/navpad/10_helix_r/config.h @@ -18,20 +18,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #pragma once #define EE_HANDS - -# define RGBLIGHT_LED_MAP { 0, 1, 2, 3, 4, 5, 6, 8, 7, \ - 9, 10, 11, 12, 13, 14, \ - 20, 19, 18, 17, 16, 15, \ - 21, 22, 23, 24, 25, 26, \ - 33, 32, 31, 30, 29, 28, 27, \ - 34, 35, 36, 37, 38, 39, 40 } - -# define RGBLED_NUM 9+32 -# define RGBLED_SPLIT { 9, 32 } -# define RGBLIGHT_HUE_STEP 8 -# define RGBLIGHT_SAT_STEP 8 -# define RGBLIGHT_VAL_STEP 8 -# define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */ //# define RGBLIGHT_EFFECT_BREATHING //# define RGBLIGHT_EFFECT_RAINBOW_MOOD # define RGBLIGHT_EFFECT_RAINBOW_SWIRL @@ -48,5 +34,4 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. //#define NO_ACTION_ONESHOT #define QUICK_TAP_TERM 0 -#define TAPPING_TERM 132 #define TAPPING_LAYER_TERM 90 diff --git a/keyboards/yushakobo/navpad/10_helix_r/info.json b/keyboards/yushakobo/navpad/10_helix_r/info.json index f086173867..4e1686f430 100644 --- a/keyboards/yushakobo/navpad/10_helix_r/info.json +++ b/keyboards/yushakobo/navpad/10_helix_r/info.json @@ -34,11 +34,20 @@ } } }, + "tapping": { + "term": 132 + }, "ws2812": { "pin": "D3" }, "rgblight": { - "max_brightness": 120 + "saturation_steps": 8, + "brightness_steps": 8, + "led_count": 41, + "max_brightness": 120, + "led_map": [0, 1, 2, 3, 4, 5, 6, 8, 7, 9, 10, 11, 12, 13, 14, 20, 19, 18, 17, 16, 15, 21, 22, 23, 24, 25, 26, 33, 32, 31, 30, 29, 28, 27, 34, 35, 36, 37, 38, 39, 40], + "sleep": true, + "split_count": [9, 32] }, "processor": "atmega32u4", "bootloader": "caterina", diff --git a/keyboards/yushakobo/quick17/config.h b/keyboards/yushakobo/quick17/config.h index 00018d319c..01f3396be4 100644 --- a/keyboards/yushakobo/quick17/config.h +++ b/keyboards/yushakobo/quick17/config.h @@ -17,10 +17,8 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #pragma once -#define RGBLED_NUM 18 - #ifdef RGB_MATRIX_ENABLE -# define RGB_MATRIX_LED_COUNT RGBLED_NUM +# define RGB_MATRIX_LED_COUNT 18 # define RGB_MATRIX_KEYPRESSES // reacts to keypresses // # define RGB_MATRIX_KEYRELEASES // reacts to keyreleases (instead of keypresses) # define RGB_DISABLE_WHEN_USB_SUSPENDED // turn off effects when suspended @@ -32,25 +30,12 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. // #define RGB_MATRIX_DEFAULT_HUE 128 // #define RGB_MATRIX_DEFAULT_SAT 255 #define RGB_MATRIX_DEFAULT_VAL RGB_MATRIX_MAXIMUM_BRIGHTNESS -# define RGB_MATRIX_HUE_STEP 8 -# define RGB_MATRIX_SAT_STEP 8 -# define RGB_MATRIX_VAL_STEP 8 -# define RGB_MATRIX_SPD_STEP 10 #endif #ifdef RGBLIGHT_ENABLE -# define RGBLIGHT_LED_MAP {\ - 6, 7, 12, 13, 14, 15,\ - 16, 17, 11, 10, 9, 8,\ - 0, 1, 2, 3, 4, 5\ - } -# define RGBLIGHT_HUE_STEP 8 -# define RGBLIGHT_SAT_STEP 8 -# define RGBLIGHT_VAL_STEP 8 -//# define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */ //# define RGBLIGHT_EFFECT_BREATHING # define RGBLIGHT_EFFECT_RAINBOW_MOOD # define RGBLIGHT_EFFECT_RAINBOW_SWIRL diff --git a/keyboards/yushakobo/quick17/info.json b/keyboards/yushakobo/quick17/info.json index 1889a00643..aef48120bd 100644 --- a/keyboards/yushakobo/quick17/info.json +++ b/keyboards/yushakobo/quick17/info.json @@ -9,10 +9,17 @@ "device_version": "0.0.1" }, "rgb_matrix": { - "driver": "WS2812" + "driver": "WS2812", + "sat_steps": 8, + "val_steps": 8, + "speed_steps": 10 }, "rgblight": { - "max_brightness": 150 + "saturation_steps": 8, + "brightness_steps": 8, + "led_count": 18, + "max_brightness": 150, + "led_map": [6, 7, 12, 13, 14, 15, 16, 17, 11, 10, 9, 8, 0, 1, 2, 3, 4, 5] }, "matrix_pins": { "cols": ["F5", "D4", "E6", "F7", "C6", "D7"], diff --git a/keyboards/yushakobo/quick7/config.h b/keyboards/yushakobo/quick7/config.h index 0a35045845..2fd469af46 100644 --- a/keyboards/yushakobo/quick7/config.h +++ b/keyboards/yushakobo/quick7/config.h @@ -18,11 +18,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #pragma once #ifdef RGBLIGHT_ENABLE -# define RGBLED_NUM 13 -# define RGBLIGHT_HUE_STEP 8 -# define RGBLIGHT_SAT_STEP 8 -# define RGBLIGHT_VAL_STEP 8 -# define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */ //# define RGBLIGHT_EFFECT_BREATHING # define RGBLIGHT_EFFECT_RAINBOW_MOOD //# define RGBLIGHT_EFFECT_RAINBOW_SWIRL diff --git a/keyboards/yushakobo/quick7/info.json b/keyboards/yushakobo/quick7/info.json index 79458d1564..8a6772a68f 100644 --- a/keyboards/yushakobo/quick7/info.json +++ b/keyboards/yushakobo/quick7/info.json @@ -14,6 +14,12 @@ {"pin_a": "F5", "pin_b": "F6"} ] }, + "rgblight": { + "saturation_steps": 8, + "brightness_steps": 8, + "led_count": 13, + "sleep": true + }, "ws2812": { "pin": "D3" }, diff --git a/keyboards/yynmt/dozen0/config.h b/keyboards/yynmt/dozen0/config.h index e94b19675f..c67c0ee883 100644 --- a/keyboards/yynmt/dozen0/config.h +++ b/keyboards/yynmt/dozen0/config.h @@ -27,10 +27,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #define RGBLIGHT_EFFECT_RGB_TEST #define RGBLIGHT_EFFECT_ALTERNATING #define RGBLIGHT_EFFECT_TWINKLE -#define RGBLED_NUM 2 -#define RGBLIGHT_HUE_STEP 8 -#define RGBLIGHT_SAT_STEP 8 -#define RGBLIGHT_VAL_STEP 8 /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ #define LOCKING_SUPPORT_ENABLE diff --git a/keyboards/yynmt/dozen0/info.json b/keyboards/yynmt/dozen0/info.json index 9a2417f039..4c4150d5bd 100644 --- a/keyboards/yynmt/dozen0/info.json +++ b/keyboards/yynmt/dozen0/info.json @@ -8,6 +8,11 @@ "pid": "0xEA4F", "device_version": "0.0.1" }, + "rgblight": { + "saturation_steps": 8, + "brightness_steps": 8, + "led_count": 2 + }, "ws2812": { "pin": "D3" }, diff --git a/keyboards/yynmt/dozen0/keymaps/f12/keymap.c b/keyboards/yynmt/dozen0/keymaps/f12/keymap.c index 167e29e106..33512faa67 100644 --- a/keyboards/yynmt/dozen0/keymaps/f12/keymap.c +++ b/keyboards/yynmt/dozen0/keymaps/f12/keymap.c @@ -22,19 +22,3 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12 ), }; - -bool process_record_user(uint16_t keycode, keyrecord_t *record) { - return true; -} - -void matrix_init_user(void) { - -} - -void matrix_scan_user(void) { - -} - -void led_set_user(uint8_t usb_led) { - -} diff --git a/keyboards/yynmt/kagamidget/config.h b/keyboards/yynmt/kagamidget/config.h index f50a2c72c3..c67c0ee883 100644 --- a/keyboards/yynmt/kagamidget/config.h +++ b/keyboards/yynmt/kagamidget/config.h @@ -27,10 +27,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #define RGBLIGHT_EFFECT_RGB_TEST #define RGBLIGHT_EFFECT_ALTERNATING #define RGBLIGHT_EFFECT_TWINKLE -#define RGBLED_NUM 4 -#define RGBLIGHT_HUE_STEP 8 -#define RGBLIGHT_SAT_STEP 8 -#define RGBLIGHT_VAL_STEP 8 /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ #define LOCKING_SUPPORT_ENABLE diff --git a/keyboards/yynmt/kagamidget/info.json b/keyboards/yynmt/kagamidget/info.json index 4165c966bf..b9e1d09059 100644 --- a/keyboards/yynmt/kagamidget/info.json +++ b/keyboards/yynmt/kagamidget/info.json @@ -8,6 +8,11 @@ "pid": "0x0000", "device_version": "0.0.1" }, + "rgblight": { + "saturation_steps": 8, + "brightness_steps": 8, + "led_count": 4 + }, "ws2812": { "pin": "D3" }, diff --git a/keyboards/zfrontier/big_switch/config.h b/keyboards/zfrontier/big_switch/config.h index eecce57fe6..4b26698659 100644 --- a/keyboards/zfrontier/big_switch/config.h +++ b/keyboards/zfrontier/big_switch/config.h @@ -18,8 +18,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #pragma once /* RGB light config */ -#define RGBLED_NUM 4 -#define RGBLIGHT_VAL_STEP 17 #define RGBLIGHT_EFFECT_BREATHING #define RGBLIGHT_EFFECT_RAINBOW_MOOD #define RGBLIGHT_EFFECT_RAINBOW_SWIRL @@ -33,6 +31,4 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #define RGBLIGHT_EFFECT_BREATHE_CENTER 2.0 #define RGBLIGHT_EFFECT_BREATHE_MAX 255 -/* long tapping config */ -#define TAPPING_TERM 500 #define PERMISSIVE_HOLD diff --git a/keyboards/zfrontier/big_switch/info.json b/keyboards/zfrontier/big_switch/info.json index 02c40f6125..746ffc8034 100644 --- a/keyboards/zfrontier/big_switch/info.json +++ b/keyboards/zfrontier/big_switch/info.json @@ -12,6 +12,12 @@ "cols": ["F1"], "rows": ["F0"] }, + "rgblight": { + "led_count": 4 + }, + "tapping": { + "term": 500 + }, "ws2812": { "pin": "B6" }, diff --git a/keyboards/zj68/config.h b/keyboards/zj68/config.h index eff7fc2d49..65dc8ee2b3 100644 --- a/keyboards/zj68/config.h +++ b/keyboards/zj68/config.h @@ -33,7 +33,3 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #define RGBLIGHT_EFFECT_RGB_TEST #define RGBLIGHT_EFFECT_ALTERNATING #define RGBLIGHT_EFFECT_TWINKLE -#define RGBLED_NUM 14 -#define RGBLIGHT_HUE_STEP 8 -#define RGBLIGHT_SAT_STEP 8 -#define RGBLIGHT_VAL_STEP 8 diff --git a/keyboards/zj68/info.json b/keyboards/zj68/info.json index 6d0df4a0c5..30d887dd8f 100644 --- a/keyboards/zj68/info.json +++ b/keyboards/zj68/info.json @@ -16,6 +16,11 @@ "pin": "B6", "levels": 5 }, + "rgblight": { + "saturation_steps": 8, + "brightness_steps": 8, + "led_count": 14 + }, "ws2812": { "pin": "E2" }, diff --git a/keyboards/zlant/config.h b/keyboards/zlant/config.h index 8471167fcd..d702489ee7 100755 --- a/keyboards/zlant/config.h +++ b/keyboards/zlant/config.h @@ -16,7 +16,3 @@ #define RGBLIGHT_EFFECT_RGB_TEST #define RGBLIGHT_EFFECT_ALTERNATING #define RGBLIGHT_EFFECT_TWINKLE -#define RGBLED_NUM 12 -#define RGBLIGHT_HUE_STEP 8 -#define RGBLIGHT_SAT_STEP 8 -#define RGBLIGHT_VAL_STEP 8 diff --git a/keyboards/zlant/info.json b/keyboards/zlant/info.json index 9f01b09518..507cc29ab9 100644 --- a/keyboards/zlant/info.json +++ b/keyboards/zlant/info.json @@ -12,6 +12,11 @@ "cols": ["F0", "F1", "F4", "F5", "F6", "F7", "B7", "D1", "D2", "D3", "B3", "B2"], "rows": ["B0", "B1", "D4", "D5"] }, + "rgblight": { + "saturation_steps": 8, + "brightness_steps": 8, + "led_count": 12 + }, "ws2812": { "pin": "D6" }, diff --git a/keyboards/zoo/wampus/config.h b/keyboards/zoo/wampus/config.h index 310b4f5756..2585ea23dd 100644 --- a/keyboards/zoo/wampus/config.h +++ b/keyboards/zoo/wampus/config.h @@ -32,7 +32,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #define RGBLIGHT_EFFECT_RGB_TEST #define RGBLIGHT_EFFECT_ALTERNATING #define RGBLIGHT_EFFECT_TWINKLE -#define RGBLED_NUM 20 // SPI RGB Driver #define WS2812_SPI SPID2 #define WS2812_SPI_MOSI_PAL_MODE 0 diff --git a/keyboards/zoo/wampus/info.json b/keyboards/zoo/wampus/info.json index ee3c3dfe47..8c02db1107 100644 --- a/keyboards/zoo/wampus/info.json +++ b/keyboards/zoo/wampus/info.json @@ -17,6 +17,9 @@ "pin": "A6", "breathing": true }, + "rgblight": { + "led_count": 20 + }, "ws2812": { "pin": "B15", "driver": "spi" diff --git a/keyboards/zoo/wampus/rules.mk b/keyboards/zoo/wampus/rules.mk index 34d5f258fc..fe3c88063d 100644 --- a/keyboards/zoo/wampus/rules.mk +++ b/keyboards/zoo/wampus/rules.mk @@ -12,5 +12,3 @@ RGBLIGHT_ENABLE = yes # Enable keyboard RGB underglow AUDIO_ENABLE = no # Audio output OLED_ENABLE = no # Enables the use of OLED displays -# Enter lower-power sleep mode when on the ChibiOS idle thread -OPT_DEFS += -DCORTEX_ENABLE_WFI_IDLE=TRUE diff --git a/keyboards/zvecr/split_blackpill/config.h b/keyboards/zvecr/split_blackpill/config.h index 3cb23cdcc5..51a63c2c38 100644 --- a/keyboards/zvecr/split_blackpill/config.h +++ b/keyboards/zvecr/split_blackpill/config.h @@ -15,13 +15,9 @@ */ #pragma once -#define MATRIX_IO_DELAY 5 - #define SPLIT_HAND_PIN B3 #define SELECT_SOFT_SERIAL_SPEED 0 -#define RGBLED_NUM 24 -#define RGBLED_SPLIT { 12, 12 } #define RGBLIGHT_EFFECT_BREATHING #define RGBLIGHT_EFFECT_RAINBOW_MOOD #define RGBLIGHT_EFFECT_RAINBOW_SWIRL diff --git a/keyboards/zvecr/split_blackpill/info.json b/keyboards/zvecr/split_blackpill/info.json index f657556db9..f845be58ff 100644 --- a/keyboards/zvecr/split_blackpill/info.json +++ b/keyboards/zvecr/split_blackpill/info.json @@ -10,7 +10,8 @@ }, "matrix_pins": { "cols": ["B11", "B10", "B1", "B0", "A7", "A6"], - "rows": ["B15", "B14", "B13", "B12"] + "rows": ["B15", "B14", "B13", "B12"], + "io_delay": 5 }, "diode_direction": "COL2ROW", "split": { @@ -25,6 +26,10 @@ } } }, + "rgblight": { + "led_count": 24, + "split_count": [12, 12] + }, "ws2812": { "pin": "B4", "driver": "pwm" diff --git a/keyboards/zvecr/zv48/config.h b/keyboards/zvecr/zv48/config.h index 25caa13057..b3239beff3 100644 --- a/keyboards/zvecr/zv48/config.h +++ b/keyboards/zvecr/zv48/config.h @@ -15,14 +15,10 @@ */ #pragma once -#define MATRIX_IO_DELAY 5 - #define SPLIT_HAND_PIN B9 //#define SELECT_SOFT_SERIAL_SPEED 0 #define SERIAL_USART_SPEED 921600 -#define RGBLED_NUM 48 -#define RGBLED_SPLIT {24, 24} #define RGBLIGHT_EFFECT_BREATHING #define RGBLIGHT_EFFECT_RAINBOW_MOOD #define RGBLIGHT_EFFECT_RAINBOW_SWIRL diff --git a/keyboards/zvecr/zv48/info.json b/keyboards/zvecr/zv48/info.json index 942a089b64..10e2bf0c3c 100644 --- a/keyboards/zvecr/zv48/info.json +++ b/keyboards/zvecr/zv48/info.json @@ -10,7 +10,8 @@ }, "matrix_pins": { "cols": ["B15", "B10", "B0", "A5", "A4", "A3"], - "rows": ["A10", "A15", "B3", "B4"] + "rows": ["A10", "A15", "B3", "B4"], + "io_delay": 5 }, "diode_direction": "COL2ROW", "encoder": { @@ -23,7 +24,9 @@ "driver": "pwm" }, "rgblight": { - "max_brightness": 120 + "led_count": 48, + "max_brightness": 120, + "split_count": [24, 24] }, "split": { "soft_serial_pin": "B6", diff --git a/keyboards/zykrah/fuyu/config.h b/keyboards/zykrah/fuyu/config.h index 92fdcaa586..0f24dfe7e3 100644 --- a/keyboards/zykrah/fuyu/config.h +++ b/keyboards/zykrah/fuyu/config.h @@ -26,7 +26,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. /* The number of LEDs connected (7 Snowflake, 34 Underglow) */ #define DRIVER_LED_TOTAL 41 -#define RGBLED_NUM 41 #define RGB_MATRIX_LED_COUNT 41 /* Caps locks LED index default is 0 (LED1 on PCB) */ diff --git a/layouts/community/60_ansi_arrow_split_bs_7u_spc/mrsendyyk/keymap.c b/layouts/community/60_ansi_arrow_split_bs_7u_spc/mrsendyyk/keymap.c index 3af6af5091..37e459893c 100644 --- a/layouts/community/60_ansi_arrow_split_bs_7u_spc/mrsendyyk/keymap.c +++ b/layouts/community/60_ansi_arrow_split_bs_7u_spc/mrsendyyk/keymap.c @@ -109,9 +109,9 @@ void update_led(void) { } } -void led_set_user(uint8_t usb_led) { +bool led_update_user(led_t led_state) { // Caps Lock Indicator - if (IS_LED_ON(usb_led, USB_LED_CAPS_LOCK)) { + if (led_state.caps_lock) { writePinLow(B2); rgblight_setrgb(255, 110, 0); } @@ -133,6 +133,7 @@ void led_set_user(uint8_t usb_led) { } update_led(); } + return false; } layer_state_t layer_state_set_user(layer_state_t state) { diff --git a/layouts/community/60_iso/bifbofii/keymap.c b/layouts/community/60_iso/bifbofii/keymap.c index d9d7383c3d..890bdb4c56 100755 --- a/layouts/community/60_iso/bifbofii/keymap.c +++ b/layouts/community/60_iso/bifbofii/keymap.c @@ -123,9 +123,9 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { */ [UNICODE] = LAYOUT_60_iso( _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_BSPC, - _______, _______, _______, X(EUR), _______, _______, _______, XP(SUE, BUE), _______, XP(SOE, BOE), _______, _______, _______, - KC_TRNS, XP(SAE, BAE), X(SS), _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_ENT, - KC_LSFT, _______, _______, _______, X(CPR), _______, _______, _______, _______, _______, _______, _______, KC_RSFT, + _______, _______, _______, UM(EUR), _______, _______, _______, UP(SUE, BUE), _______, UP(SOE, BOE), _______, _______, _______, + KC_TRNS, UP(SAE, BAE), UM(SS), _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_ENT, + KC_LSFT, _______, _______, _______, UM(CPR), _______, _______, _______, _______, _______, _______, _______, KC_RSFT, KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_RALT, KC_RGUI, KC_RCTL, _______ ), diff --git a/layouts/community/65_ansi_blocker/spidey3/keymap.c b/layouts/community/65_ansi_blocker/spidey3/keymap.c index 5f8080d471..81ee2bf3a7 100644 --- a/layouts/community/65_ansi_blocker/spidey3/keymap.c +++ b/layouts/community/65_ansi_blocker/spidey3/keymap.c @@ -32,10 +32,10 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { ), // Glyph Transformation [_GLYPH] = LAYOUT_65_ansi_blocker( - QK_BOOT, X(SAD), X(MEH), X(HAPPY), X(ANGRY), X(THUMBDN), X(THUMBUP), X(SPIDER), X_BUL, X(LOL), X(SURPRISE),X_DASH, SPI_GFLOCK, XXXXXXX, XXXXXXX, + QK_BOOT, UM(SAD), UM(MEH), UM(HAPPY), UM(ANGRY), UM(THUMBDN),UM(THUMBUP),UM(SPIDER), X_BUL, UM(LOL), UM(SURPRISE),X_DASH, SPI_GFLOCK, XXXXXXX, XXXXXXX, EE_CLR, SPI_NORMAL, SPI_WIDE, SPI_SCRIPT, SPI_BLOCKS, SPI_CIRCLE, SPI_SQUARE, SPI_PARENS, SPI_FRAKTR, SPI_BOLD, SPI_MATH, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, _______, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, - XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, X(LARR), X(RARR), XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, + XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, UM(LARR), UM(RARR), XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, _______, XXXXXXX, XXXXXXX, XXXXXXX ) }; diff --git a/layouts/community/75_ansi/spidey3/keymap.c b/layouts/community/75_ansi/spidey3/keymap.c index 5c2f6a150b..4e251b41db 100644 --- a/layouts/community/75_ansi/spidey3/keymap.c +++ b/layouts/community/75_ansi/spidey3/keymap.c @@ -24,10 +24,10 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { // FN [_FN] = LAYOUT_75_ansi( QK_BOOT, SPI_NORMAL, SPI_WIDE, SPI_SCRIPT, SPI_BLOCKS, SPI_CIRCLE, SPI_SQUARE, SPI_PARENS, SPI_FRAKTR, SPI_BOLD, SPI_MATH, XXXXXXX, SPI_GFLOCK, KC_SLEP, CH_SUSP, KC_PWR, - EE_CLR, X(SAD), X(MEH), X(HAPPY), X(ANGRY), X(THUMBDN), X(THUMBUP), X(SPIDER), X_BUL, X(LOL), X(SURPRISE),X_DASH, XXXXXXX, KC_PAUS, KC_SCRL, + EE_CLR, UM(SAD), UM(MEH), UM(HAPPY), UM(ANGRY), UM(THUMBDN),UM(THUMBUP),UM(SPIDER), X_BUL, UM(LOL), UM(SURPRISE),X_DASH, XXXXXXX, KC_PAUS, KC_SCRL, XXXXXXX, RGB_TOG, RGB_MOD, RGB_HUD, RGB_HUI, RGB_SAD, RGB_SAI, RGB_VAD, RGB_VAI, SPI_GLO, VK_TOGG, XXXXXXX, XXXXXXX, XXXXXXX, KC_BRIU, XXXXXXX, RGB_M_P, RGB_M_B, RGB_M_R, RGB_M_SW, RGB_M_SN, RGB_M_K, RGB_M_G, RGB_M_TW, UC_LINX, XXXXXXX, XXXXXXX, XXXXXXX, KC_BRID, - _______, XXXXXXX, UC_EMAC, UC_WINC, UC_NEXT, NK_TOGG, TG(_NUMPAD),UC_MAC, X(LARR), X(RARR), DB_TOGG, _______, KC_VOLU, KC_MUTE, + _______, XXXXXXX, UC_EMAC, UC_WINC, UC_NEXT, NK_TOGG, TG(_NUMPAD),UC_MAC, UM(LARR), UM(RARR), DB_TOGG, _______, KC_VOLU, KC_MUTE, _______, _______, _______, KC_MPLY, KC_ASST, _______, KC_CPNL, KC_MPRV, KC_VOLD, KC_MNXT ) }; diff --git a/layouts/community/ergodox/colemak_code_friendly/keymap.c b/layouts/community/ergodox/colemak_code_friendly/keymap.c index ae5bdcc5b8..d9e3c9fa61 100644 --- a/layouts/community/ergodox/colemak_code_friendly/keymap.c +++ b/layouts/community/ergodox/colemak_code_friendly/keymap.c @@ -310,9 +310,6 @@ void matrix_init_user(void) { void matrix_scan_user(void) { uint8_t layer = get_highest_layer(layer_state); - //led 1, RED, Caps-Lock ON - //if (host_keyboard_leds() & (1<<USB_LED_CAPS_LOCK)) ergodox_right_led_1_on(); - //led 2, GREEN if (layer == LAYER_NUM) ergodox_right_led_2_on(); @@ -327,9 +324,10 @@ void matrix_scan_user(void) { }; // Runs constantly in the background, in a loop. -void led_set_user(uint8_t usb_led) { - if (usb_led & (1<<USB_LED_CAPS_LOCK)) +bool led_update_user(led_t led_state) { + if (led_state.caps_lock) ergodox_right_led_1_on(); else ergodox_right_led_1_off(); + return false; } diff --git a/layouts/community/ergodox/drashna/keymap.c b/layouts/community/ergodox/drashna/keymap.c index 1853b70071..8d1449486a 100644 --- a/layouts/community/ergodox/drashna/keymap.c +++ b/layouts/community/ergodox/drashna/keymap.c @@ -212,9 +212,9 @@ bool process_record_keymap(uint16_t keycode, keyrecord_t *record) { void housekeeping_task_keymap(void) { // runs frequently to update info #ifdef KEYBOARD_ergodox_ez - uint8_t modifiers = get_mods(); - uint8_t led_usb_state = host_keyboard_leds(); - uint8_t one_shot = get_oneshot_mods(); + uint8_t modifiers = get_mods(); + led_t led_state = host_keyboard_led_state(); + uint8_t one_shot = get_oneshot_mods(); if (!skip_leds) { ergodox_board_led_off(); @@ -225,7 +225,7 @@ void housekeeping_task_keymap(void) { // runs frequently to update info // Since we're not using the LEDs here for layer indication anymore, // then lets use them for modifier indicators. Shame we don't have 4... // Also, no "else", since we want to know each, independently. - if ((modifiers | one_shot) & MOD_MASK_SHIFT || led_usb_state & (1 << USB_LED_CAPS_LOCK)) { + if ((modifiers | one_shot) & MOD_MASK_SHIFT || led_state.caps_lock) { ergodox_right_led_2_on(); ergodox_right_led_2_set(50); } diff --git a/layouts/community/ergodox/dvorak_emacs/keymap.c b/layouts/community/ergodox/dvorak_emacs/keymap.c index 5c310593be..8bd22bc17e 100644 --- a/layouts/community/ergodox/dvorak_emacs/keymap.c +++ b/layouts/community/ergodox/dvorak_emacs/keymap.c @@ -19,13 +19,6 @@ /* #define CBRACK 3 // key ] or left alt */ /* #define CAPS 4 // caps lock */ -// LEDS -#define USB_LED_NUM_LOCK 0 -#define USB_LED_CAPS_LOCK 1 -#define USB_LED_SCROLL_LOCK 2 -#define USB_LED_COMPOSE 3 -#define USB_LED_KANA 4 - // TIMERS #define KEY_TAP_FAST 85 #define KEY_TAP_SLOW 95 diff --git a/layouts/community/ergodox/dvorak_emacs_software/keymap.c b/layouts/community/ergodox/dvorak_emacs_software/keymap.c index c2bc1ef8f2..188347607f 100644 --- a/layouts/community/ergodox/dvorak_emacs_software/keymap.c +++ b/layouts/community/ergodox/dvorak_emacs_software/keymap.c @@ -20,13 +20,6 @@ /* #define CBRACK 3 // key ] or left alt */ /* #define CAPS 4 // caps lock */ -// LEDS -#define USB_LED_NUM_LOCK 0 -#define USB_LED_CAPS_LOCK 1 -#define USB_LED_SCROLL_LOCK 2 -#define USB_LED_COMPOSE 3 -#define USB_LED_KANA 4 - // TIMERS #define KEY_TAP_FAST 85 #define KEY_TAP_SLOW 95 diff --git a/layouts/community/ergodox/jjerrell/keymap.c b/layouts/community/ergodox/jjerrell/keymap.c index 110a8aba63..48572d2de3 100644 --- a/layouts/community/ergodox/jjerrell/keymap.c +++ b/layouts/community/ergodox/jjerrell/keymap.c @@ -94,12 +94,12 @@ layer_state_t layer_state_set_keymap(layer_state_t state) { void matrix_scan_keymap(void) { uint8_t modifiers = get_mods(); - uint8_t led_usb_state = host_keyboard_leds(); + led_t led_state = host_keyboard_led_state(); uint8_t one_shot = get_oneshot_mods(); uint8_t layer_is_workman = layer_state_is(_WORKMAN); if ((modifiers) && (layer_is_workman)) { - if (modifiers & MOD_MASK_SHIFT || led_usb_state & (1<<USB_LED_CAPS_LOCK) || one_shot & MOD_MASK_SHIFT) { + if (modifiers & MOD_MASK_SHIFT || led_state.caps_lock || one_shot & MOD_MASK_SHIFT) { ergodox_right_led_1_on(); ergodox_right_led_1_set( 25 ); } else { diff --git a/layouts/community/ergodox/ordinary/keymap.c b/layouts/community/ergodox/ordinary/keymap.c index 6c7586034c..c828c6fb97 100644 --- a/layouts/community/ergodox/ordinary/keymap.c +++ b/layouts/community/ergodox/ordinary/keymap.c @@ -238,7 +238,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { // Runs constantly in the background, in a loop. void matrix_scan_user(void) { // shift or caps lock turns on red light - if ((keyboard_report->mods & MOD_BIT(KC_LSFT)) || (keyboard_report->mods & MOD_BIT(KC_RSFT)) || (host_keyboard_leds() & (1<<USB_LED_CAPS_LOCK))) { + if ((keyboard_report->mods & MOD_BIT(KC_LSFT)) || (keyboard_report->mods & MOD_BIT(KC_RSFT)) || host_keyboard_led_state().caps_lock) { ergodox_right_led_1_on(); } else { ergodox_right_led_1_off(); diff --git a/layouts/community/ergodox/ordinary_osx/keymap.c b/layouts/community/ergodox/ordinary_osx/keymap.c index f67a6d6da0..3de64f4994 100644 --- a/layouts/community/ergodox/ordinary_osx/keymap.c +++ b/layouts/community/ergodox/ordinary_osx/keymap.c @@ -238,7 +238,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { // Runs constantly in the background, in a loop. void matrix_scan_user(void) { // shift or caps lock turns on red light - if ((keyboard_report->mods & MOD_BIT(KC_LSFT)) || (keyboard_report->mods & MOD_BIT(KC_RSFT)) || (host_keyboard_leds() & (1<<USB_LED_CAPS_LOCK))) { + if ((keyboard_report->mods & MOD_BIT(KC_LSFT)) || (keyboard_report->mods & MOD_BIT(KC_RSFT)) || host_keyboard_led_state().caps_lock) { ergodox_right_led_1_on(); } else { ergodox_right_led_1_off(); diff --git a/layouts/community/ergodox/osx_neo2/keymap.c b/layouts/community/ergodox/osx_neo2/keymap.c index 5b279073cc..079a92a97e 100644 --- a/layouts/community/ergodox/osx_neo2/keymap.c +++ b/layouts/community/ergodox/osx_neo2/keymap.c @@ -686,7 +686,7 @@ bool process_record_user(uint16_t keycode, keyrecord_t *record) { if ((capslock_state & MOD_MASK_SHIFT) == MOD_MASK_SHIFT) { // CAPSLOCK is currently active, disable it - if (host_keyboard_leds() & (1 << USB_LED_CAPS_LOCK)) { + if (host_keyboard_led_state().caps_lock) { unregister_code(KC_LOCKING_CAPS_LOCK); } else { register_code(KC_LOCKING_CAPS_LOCK); @@ -697,11 +697,6 @@ bool process_record_user(uint16_t keycode, keyrecord_t *record) { return process_record_user_shifted(keycode, record); }; -// Runs just one time when the keyboard initializes. -void matrix_init_user(void){ - -}; - // Runs constantly in the background, in a loop. void matrix_scan_user(void) { uint8_t layer = get_highest_layer(layer_state); diff --git a/layouts/community/ergodox/software_neo2/keymap.c b/layouts/community/ergodox/software_neo2/keymap.c index c191a034f2..1c68a68b0f 100644 --- a/layouts/community/ergodox/software_neo2/keymap.c +++ b/layouts/community/ergodox/software_neo2/keymap.c @@ -106,7 +106,7 @@ void matrix_scan_user(void) { ergodox_right_led_3_off(); ergodox_board_led_off(); - if (host_keyboard_leds() & (1<<USB_LED_CAPS_LOCK)) { + if (host_keyboard_led_state().caps_lock) { ergodox_right_led_3_on(); } diff --git a/layouts/community/ergodox/swedish-lindhe/keymap.c b/layouts/community/ergodox/swedish-lindhe/keymap.c index 1644512de7..376574f690 100644 --- a/layouts/community/ergodox/swedish-lindhe/keymap.c +++ b/layouts/community/ergodox/swedish-lindhe/keymap.c @@ -154,11 +154,6 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { ), }; -// Runs just one time when the keyboard initializes. -void matrix_init_user(void) { - -}; - // Runs constantly in the background, in a loop. void matrix_scan_user(void) { @@ -185,7 +180,7 @@ void matrix_scan_user(void) { break; } - if (host_keyboard_leds() & (1<<USB_LED_CAPS_LOCK)) { + if (host_keyboard_led_state().caps_lock) { // if capslk is on, set led 1 on ergodox_right_led_1_on(); } else { diff --git a/layouts/community/numpad_5x6/bjohnson/keymap.c b/layouts/community/numpad_5x6/bjohnson/keymap.c index 71c8829d02..63b358f226 100644 --- a/layouts/community/numpad_5x6/bjohnson/keymap.c +++ b/layouts/community/numpad_5x6/bjohnson/keymap.c @@ -35,12 +35,13 @@ void keyboard_post_init_user(void) { #endif } -void led_set_user(uint8_t usb_led) { - if (IS_LED_ON(usb_led, USB_LED_NUM_LOCK)) { +bool led_update_user(led_t led_state) { + if (led_state.num_lock) { rgblight_sethsv_noeeprom(HSV_CYAN); } else { rgblight_sethsv_noeeprom(HSV_MAGENTA); } + return false; } void shutdown_user (void) { diff --git a/layouts/community/ortho_4x12/bifbofii/keymap.c b/layouts/community/ortho_4x12/bifbofii/keymap.c index 7c25fed016..e7f427127e 100644 --- a/layouts/community/ortho_4x12/bifbofii/keymap.c +++ b/layouts/community/ortho_4x12/bifbofii/keymap.c @@ -146,9 +146,9 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { * +-----+-----+-----+-----+-----+-----+-----+-----+-----+-----+-----+-----+ */ [UNICODE] = LAYOUT_ortho_4x12( - _______, _______, _______, X(EUR), _______, _______, _______, XP(SUE, BUE), _______, XP(SOE, BOE), _______, _______, - _______, XP(SAE, BAE), X(SS), _______, _______, _______, _______, _______, _______, _______, _______, _______, - _______, _______, _______, X(CPR), _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, UM(EUR), _______, _______, _______, UP(SUE, BUE), _______, UP(SOE, BOE), _______, _______, + _______, UP(SAE, BAE), UM(SS), _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, UM(CPR), _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______ ), diff --git a/layouts/community/ortho_4x12/brandonschlack/keymap.c b/layouts/community/ortho_4x12/brandonschlack/keymap.c index 7361de1a03..04c83de9e9 100644 --- a/layouts/community/ortho_4x12/brandonschlack/keymap.c +++ b/layouts/community/ortho_4x12/brandonschlack/keymap.c @@ -100,12 +100,13 @@ void keyboard_post_init_keymap(void) { } // Use Green LED for Caps Lock -void led_set_user(uint8_t usb_led) { - if (IS_LED_OFF(usb_led, USB_LED_CAPS_LOCK)) { +bool led_update_user(led_t led_state) { + if (led_state.caps_lock) { writePinLow(LED_GREEN); } else { writePinHigh(LED_GREEN); } + return false; } #endif diff --git a/layouts/community/ortho_4x12/drashna/keymap.c b/layouts/community/ortho_4x12/drashna/keymap.c index 475ccc5c3a..cdf41fc5dc 100644 --- a/layouts/community/ortho_4x12/drashna/keymap.c +++ b/layouts/community/ortho_4x12/drashna/keymap.c @@ -184,7 +184,7 @@ led_config_t g_led_config = { bool rgb_matrix_indicators_advanced_keymap(uint8_t led_min, uint8_t led_max) { uint8_t this_mod = get_mods(); - uint8_t this_led = host_keyboard_leds(); + led_t this_led = host_keyboard_led_state(); uint8_t this_osm = get_oneshot_mods(); # ifdef KEYBOARD_planck_ez # define THUMB_LED 41 @@ -208,7 +208,7 @@ bool rgb_matrix_indicators_advanced_keymap(uint8_t led_min, uint8_t led_max) { break; } - if ((this_mod | this_osm) & MOD_MASK_SHIFT || this_led & (1 << USB_LED_CAPS_LOCK)) { + if ((this_mod | this_osm) & MOD_MASK_SHIFT || this_led.caps_lock) { if (!layer_state_cmp(layer_state, _ADJUST)) { RGB_MATRIX_INDICATOR_SET_COLOR(24, 0x00, 0xFF, 0x00); } diff --git a/layouts/community/tkl_ansi/brandonschlack/keymap.c b/layouts/community/tkl_ansi/brandonschlack/keymap.c index 8e5743136c..9b425c477a 100644 --- a/layouts/community/tkl_ansi/brandonschlack/keymap.c +++ b/layouts/community/tkl_ansi/brandonschlack/keymap.c @@ -96,7 +96,3 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { bool process_record_keymap(uint16_t keycode, keyrecord_t *record) { return true; } - -void led_set_user(uint8_t usb_led) { - -} diff --git a/lib/chibios-contrib b/lib/chibios-contrib -Subproject a224be155ae18d38deccf33a6c1d259b9a5ad8d +Subproject 5d2d95c520a13d2c3e42343f51b18822d63781d diff --git a/lib/python/qmk/cli/mass_compile.py b/lib/python/qmk/cli/mass_compile.py index 52c1cae4c2..ddd946a32b 100755 --- a/lib/python/qmk/cli/mass_compile.py +++ b/lib/python/qmk/cli/mass_compile.py @@ -53,20 +53,22 @@ def mass_compile(cli): keyboard_name = target[0] keymap_name = target[1] keyboard_safe = keyboard_name.replace('/', '_') + build_log = f"{QMK_FIRMWARE}/.build/build.log.{os.getpid()}.{keyboard_safe}.{keymap_name}" + failed_log = f"{QMK_FIRMWARE}/.build/failed.log.{os.getpid()}.{keyboard_safe}.{keymap_name}" # yapf: disable f.write( f"""\ all: {keyboard_safe}_{keymap_name}_binary {keyboard_safe}_{keymap_name}_binary: - @rm -f "{QMK_FIRMWARE}/.build/failed.log.{keyboard_safe}.{keymap_name}" || true - @echo "Compiling QMK Firmware for target: '{keyboard_name}:{keymap_name}'..." >>"{QMK_FIRMWARE}/.build/build.log.{os.getpid()}.{keyboard_safe}" + @rm -f "{build_log}" || true + @echo "Compiling QMK Firmware for target: '{keyboard_name}:{keymap_name}'..." >>"{build_log}" +@$(MAKE) -C "{QMK_FIRMWARE}" -f "{QMK_FIRMWARE}/builddefs/build_keyboard.mk" KEYBOARD="{keyboard_name}" KEYMAP="{keymap_name}" COLOR=true SILENT=false {' '.join(cli.args.env)} \\ - >>"{QMK_FIRMWARE}/.build/build.log.{os.getpid()}.{keyboard_safe}.{keymap_name}" 2>&1 \\ - || cp "{QMK_FIRMWARE}/.build/build.log.{os.getpid()}.{keyboard_safe}.{keymap_name}" "{QMK_FIRMWARE}/.build/failed.log.{os.getpid()}.{keyboard_safe}.{keymap_name}" - @{{ grep '\[ERRORS\]' "{QMK_FIRMWARE}/.build/build.log.{os.getpid()}.{keyboard_safe}.{keymap_name}" >/dev/null 2>&1 && printf "Build %-64s \e[1;31m[ERRORS]\e[0m\\n" "{keyboard_name}:{keymap_name}" ; }} \\ - || {{ grep '\[WARNINGS\]' "{QMK_FIRMWARE}/.build/build.log.{os.getpid()}.{keyboard_safe}.{keymap_name}" >/dev/null 2>&1 && printf "Build %-64s \e[1;33m[WARNINGS]\e[0m\\n" "{keyboard_name}:{keymap_name}" ; }} \\ + >>"{build_log}" 2>&1 \\ + || cp "{build_log}" "{failed_log}" + @{{ grep '\[ERRORS\]' "{build_log}" >/dev/null 2>&1 && printf "Build %-64s \e[1;31m[ERRORS]\e[0m\\n" "{keyboard_name}:{keymap_name}" ; }} \\ + || {{ grep '\[WARNINGS\]' "{build_log}" >/dev/null 2>&1 && printf "Build %-64s \e[1;33m[WARNINGS]\e[0m\\n" "{keyboard_name}:{keymap_name}" ; }} \\ || printf "Build %-64s \e[1;32m[OK]\e[0m\\n" "{keyboard_name}:{keymap_name}" - @rm -f "{QMK_FIRMWARE}/.build/build.log.{os.getpid()}.{keyboard_safe}.{keymap_name}" || true + @rm -f "{build_log}" || true """# noqa ) # yapf: enable @@ -77,7 +79,6 @@ all: {keyboard_safe}_{keymap_name}_binary f"""\ @rm -rf "{QMK_FIRMWARE}/.build/{keyboard_safe}_{keymap_name}.elf" 2>/dev/null || true @rm -rf "{QMK_FIRMWARE}/.build/{keyboard_safe}_{keymap_name}.map" 2>/dev/null || true - @rm -rf "{QMK_FIRMWARE}/.build/obj_{keyboard_safe}" || true @rm -rf "{QMK_FIRMWARE}/.build/obj_{keyboard_safe}_{keymap_name}" || true """# noqa ) diff --git a/lib/python/qmk/commands.py b/lib/python/qmk/commands.py index b1eac13957..ab8e323edf 100644 --- a/lib/python/qmk/commands.py +++ b/lib/python/qmk/commands.py @@ -9,7 +9,7 @@ from pathlib import Path from milc import cli import jsonschema -from qmk.constants import KEYBOARD_OUTPUT_PREFIX +from qmk.constants import INTERMEDIATE_OUTPUT_PREFIX from qmk.json_schema import json_load, validate @@ -134,16 +134,13 @@ def compile_configurator_json(user_keymap, bootloader=None, parallel=1, clean=Fa keyboard_filesafe = user_keymap['keyboard'].replace('/', '_') target = f'{keyboard_filesafe}_{user_keymap["keymap"]}' - keyboard_output = Path(f'{KEYBOARD_OUTPUT_PREFIX}{keyboard_filesafe}') - keymap_output = Path(f'{keyboard_output}_{user_keymap["keymap"]}') - keymap_dir = keymap_output / 'src' + intermediate_output = Path(f'{INTERMEDIATE_OUTPUT_PREFIX}{keyboard_filesafe}_{user_keymap["keymap"]}') + keymap_dir = intermediate_output / 'src' keymap_json = keymap_dir / 'keymap.json' if clean: - if keyboard_output.exists(): - shutil.rmtree(keyboard_output) - if keymap_output.exists(): - shutil.rmtree(keymap_output) + if intermediate_output.exists(): + shutil.rmtree(intermediate_output) # begin with making the deepest folder in the tree keymap_dir.mkdir(exist_ok=True, parents=True) @@ -183,13 +180,12 @@ def compile_configurator_json(user_keymap, bootloader=None, parallel=1, clean=Fa f'KEYMAP={user_keymap["keymap"]}', f'KEYBOARD_FILESAFE={keyboard_filesafe}', f'TARGET={target}', - f'KEYBOARD_OUTPUT={keyboard_output}', - f'KEYMAP_OUTPUT={keymap_output}', - f'MAIN_KEYMAP_PATH_1={keymap_output}', - f'MAIN_KEYMAP_PATH_2={keymap_output}', - f'MAIN_KEYMAP_PATH_3={keymap_output}', - f'MAIN_KEYMAP_PATH_4={keymap_output}', - f'MAIN_KEYMAP_PATH_5={keymap_output}', + f'INTERMEDIATE_OUTPUT={intermediate_output}', + f'MAIN_KEYMAP_PATH_1={intermediate_output}', + f'MAIN_KEYMAP_PATH_2={intermediate_output}', + f'MAIN_KEYMAP_PATH_3={intermediate_output}', + f'MAIN_KEYMAP_PATH_4={intermediate_output}', + f'MAIN_KEYMAP_PATH_5={intermediate_output}', f'KEYMAP_JSON={keymap_json}', f'KEYMAP_PATH={keymap_dir}', f'VERBOSE={verbose}', diff --git a/lib/python/qmk/constants.py b/lib/python/qmk/constants.py index 8a13029a8a..d987ebaae7 100644 --- a/lib/python/qmk/constants.py +++ b/lib/python/qmk/constants.py @@ -14,7 +14,7 @@ QMK_FIRMWARE_UPSTREAM = 'qmk/qmk_firmware' MAX_KEYBOARD_SUBFOLDERS = 5 # Supported processor types -CHIBIOS_PROCESSORS = 'cortex-m0', 'cortex-m0plus', 'cortex-m3', 'cortex-m4', 'MKL26Z64', 'MK20DX128', 'MK20DX256', 'MK64FX512', 'MK66FX1M0', 'RP2040', 'STM32F042', 'STM32F072', 'STM32F103', 'STM32F303', 'STM32F401', 'STM32F405', 'STM32F407', 'STM32F411', 'STM32F446', 'STM32G431', 'STM32G474', 'STM32L412', 'STM32L422', 'STM32L432', 'STM32L433', 'STM32L442', 'STM32L443', 'GD32VF103', 'WB32F3G71', 'WB32FQ95' +CHIBIOS_PROCESSORS = 'cortex-m0', 'cortex-m0plus', 'cortex-m3', 'cortex-m4', 'MKL26Z64', 'MK20DX128', 'MK20DX256', 'MK64FX512', 'MK66FX1M0', 'RP2040', 'STM32F042', 'STM32F072', 'STM32F103', 'STM32F303', 'STM32F401', 'STM32F405', 'STM32F407', 'STM32F411', 'STM32F446', 'STM32G431', 'STM32G474', 'STM32H723', 'STM32H733', 'STM32L412', 'STM32L422', 'STM32L432', 'STM32L433', 'STM32L442', 'STM32L443', 'GD32VF103', 'WB32F3G71', 'WB32FQ95' LUFA_PROCESSORS = 'at90usb162', 'atmega16u2', 'atmega32u2', 'atmega16u4', 'atmega32u4', 'at90usb646', 'at90usb647', 'at90usb1286', 'at90usb1287', None VUSB_PROCESSORS = 'atmega32a', 'atmega328p', 'atmega328', 'attiny85' @@ -36,6 +36,8 @@ MCU2BOOTLOADER = { "STM32F446": "stm32-dfu", "STM32G431": "stm32-dfu", "STM32G474": "stm32-dfu", + "STM32H723": "stm32-dfu", + "STM32H733": "stm32-dfu", "STM32L412": "stm32-dfu", "STM32L422": "stm32-dfu", "STM32L432": "stm32-dfu", @@ -123,7 +125,7 @@ ROW_LETTERS = '0123456789ABCDEFGHIJKLMNOPQRSTUVWXYZabcdefghijklmnop' # Constants that should match their counterparts in make BUILD_DIR = environ.get('BUILD_DIR', '.build') -KEYBOARD_OUTPUT_PREFIX = f'{BUILD_DIR}/obj_' +INTERMEDIATE_OUTPUT_PREFIX = f'{BUILD_DIR}/obj_' # Headers for generated files GPL2_HEADER_C_LIKE = f'''\ diff --git a/platforms/avr/sleep_led.c b/platforms/avr/sleep_led.c index b05431633b..ad6253be93 100644 --- a/platforms/avr/sleep_led.c +++ b/platforms/avr/sleep_led.c @@ -109,16 +109,19 @@ ISR(TIMERx_COMPA_vect) { uint8_t duration : 2; uint8_t index : 6; } pwm; - } timer = {.row = 0}; + } timer = {.row = 0}; + static led_t led_state = {0}; timer.row++; // LED on if (timer.pwm.count == 0) { - led_set(1 << USB_LED_CAPS_LOCK); + led_state.caps_lock = true; + led_set(led_state.raw); } // LED off if (timer.pwm.count == pgm_read_byte(&breathing_table[timer.pwm.index])) { - led_set(0); + led_state.caps_lock = false; + led_set(led_state.raw); } } diff --git a/platforms/chibios/boards/GENERIC_PROMICRO_RP2040/configs/mcuconf.h b/platforms/chibios/boards/GENERIC_PROMICRO_RP2040/configs/mcuconf.h index ab293c0b40..8621807cbb 100644 --- a/platforms/chibios/boards/GENERIC_PROMICRO_RP2040/configs/mcuconf.h +++ b/platforms/chibios/boards/GENERIC_PROMICRO_RP2040/configs/mcuconf.h @@ -106,7 +106,6 @@ #define RP_USB_USE_USBD0 TRUE #define RP_USB_FORCE_VBUS_DETECT TRUE #define RP_USE_EXTERNAL_VBUS_DETECT FALSE -#define RP_USB_USE_SOF_INTR TRUE #define RP_USB_USE_ERROR_DATA_SEQ_INTR FALSE #endif /* MCUCONF_H */ diff --git a/platforms/chibios/boards/GENERIC_RP_RP2040/configs/mcuconf.h b/platforms/chibios/boards/GENERIC_RP_RP2040/configs/mcuconf.h index b91d762419..902f9b5005 100644 --- a/platforms/chibios/boards/GENERIC_RP_RP2040/configs/mcuconf.h +++ b/platforms/chibios/boards/GENERIC_RP_RP2040/configs/mcuconf.h @@ -106,7 +106,6 @@ #define RP_USB_USE_USBD0 TRUE #define RP_USB_FORCE_VBUS_DETECT TRUE #define RP_USE_EXTERNAL_VBUS_DETECT FALSE -#define RP_USB_USE_SOF_INTR TRUE #define RP_USB_USE_ERROR_DATA_SEQ_INTR FALSE #endif /* MCUCONF_H */ diff --git a/platforms/chibios/boards/PJRC_TEENSY_3_5/board/board.mk b/platforms/chibios/boards/GENERIC_STM32_H723XG/board/board.mk index e129836b08..3511f752a9 100644 --- a/platforms/chibios/boards/PJRC_TEENSY_3_5/board/board.mk +++ b/platforms/chibios/boards/GENERIC_STM32_H723XG/board/board.mk @@ -1,10 +1,11 @@ -include $(CHIBIOS_CONTRIB)/os/hal/boards/PJRC_TEENSY_3_5/board.mk - # List of all the board related files. +BOARDSRC = $(CHIBIOS)/os/hal/boards/ST_NUCLEO144_H723ZG/board.c + +# Extra files BOARDSRC += $(BOARD_PATH)/board/extra.c # Required include directories -BOARDINC += $(BOARD_PATH)/board +BOARDINC = $(CHIBIOS)/os/hal/boards/ST_NUCLEO144_H723ZG # Shared variables ALLCSRC += $(BOARDSRC) diff --git a/platforms/chibios/boards/GENERIC_STM32_H723XG/board/extra.c b/platforms/chibios/boards/GENERIC_STM32_H723XG/board/extra.c new file mode 100755 index 0000000000..fce0b4abad --- /dev/null +++ b/platforms/chibios/boards/GENERIC_STM32_H723XG/board/extra.c @@ -0,0 +1,36 @@ +// Copyright 2023 Nick Brassel (@tzarc) +// SPDX-License-Identifier: GPL-2.0-or-later +#include <hal.h> +#define BOOTLOADER_MAGIC 0xDEADBEEF + +//////////////////////////////////////////////////////////////////////////////// +// Different signalling for bootloader entry +// - RAM is cleared on reset, so we can't use the usual __ram0_end__ symbol. +// - Use backup registers in the RTC peripheral to store the magic value instead. + +static inline void enable_backup_register_access(void) { + PWR->CR1 |= PWR_CR1_DBP; +} + +static inline void disable_backup_register_access(void) { + PWR->CR1 &= ~PWR_CR1_DBP; +} + +void bootloader_marker_enable(void) { + enable_backup_register_access(); + RTC->BKP0R = BOOTLOADER_MAGIC; + disable_backup_register_access(); +} + +bool bootloader_marker_active(void) { + enable_backup_register_access(); + bool ret = RTC->BKP0R == BOOTLOADER_MAGIC; + disable_backup_register_access(); + return ret; +} + +void bootloader_marker_disable(void) { + enable_backup_register_access(); + RTC->BKP0R = 0; + disable_backup_register_access(); +} diff --git a/platforms/chibios/boards/GENERIC_STM32_H723XG/configs/config.h b/platforms/chibios/boards/GENERIC_STM32_H723XG/configs/config.h new file mode 100644 index 0000000000..f43df29b54 --- /dev/null +++ b/platforms/chibios/boards/GENERIC_STM32_H723XG/configs/config.h @@ -0,0 +1,9 @@ +// Copyright 2023 Nick Brassel (@tzarc) +// SPDX-License-Identifier: GPL-2.0-or-later +#pragma once + +#define USB_DRIVER USBD2 + +#ifndef EARLY_INIT_PERFORM_BOOTLOADER_JUMP +# define EARLY_INIT_PERFORM_BOOTLOADER_JUMP TRUE +#endif diff --git a/platforms/chibios/boards/GENERIC_STM32_H723XG/configs/mcuconf.h b/platforms/chibios/boards/GENERIC_STM32_H723XG/configs/mcuconf.h new file mode 100644 index 0000000000..0239ec5273 --- /dev/null +++ b/platforms/chibios/boards/GENERIC_STM32_H723XG/configs/mcuconf.h @@ -0,0 +1,511 @@ +/* + ChibiOS - Copyright (C) 2006..2020 Giovanni Di Sirio + + Licensed under the Apache License, Version 2.0 (the "License"); + you may not use this file except in compliance with the License. + You may obtain a copy of the License at + + http://www.apache.org/licenses/LICENSE-2.0 + + Unless required by applicable law or agreed to in writing, software + distributed under the License is distributed on an "AS IS" BASIS, + WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + See the License for the specific language governing permissions and + limitations under the License. +*/ + +#ifndef MCUCONF_H +#define MCUCONF_H + +/* + * STM32H723/33/25/35 drivers configuration. + * The following settings override the default settings present in + * the various device driver implementation headers. + * Note that the settings for each driver only have effect if the whole + * driver is enabled in halconf.h. + * + * IRQ priorities: + * 15...0 Lowest...Highest. + * + * DMA priorities: + * 0...3 Lowest...Highest. + */ + +#define STM32H7xx_MCUCONF +#define STM32H723_MCUCONF +#define STM32H733_MCUCONF +#define STM32H725_MCUCONF +#define STM32H735_MCUCONF + +/* + * General settings. + */ +#define STM32_NO_INIT FALSE + +/* + * Memory attributes settings. + */ +#define STM32_NOCACHE_ENABLE FALSE +#define STM32_NOCACHE_MPU_REGION MPU_REGION_6 +#define STM32_NOCACHE_RBAR 0x24000000U +#define STM32_NOCACHE_RASR MPU_RASR_SIZE_16K + +/* + * PWR system settings. + * Reading STM32 Reference Manual is required, settings in PWR_CR3 are + * very critical. + * Register constants are taken from the ST header. + */ +#define STM32_VOS STM32_VOS_SCALE0 +#define STM32_PWR_CR1 (PWR_CR1_SVOS_1 | PWR_CR1_SVOS_0) +#define STM32_PWR_CR2 (PWR_CR2_BREN) +#define STM32_PWR_CR3 (PWR_CR3_LDOEN | PWR_CR3_USB33DEN) +#define STM32_PWR_CPUCR 0 + +/* + * Clock tree static settings. + * Reading STM32 Reference Manual is required. + */ +#define STM32_HSI_ENABLED TRUE +#define STM32_LSI_ENABLED FALSE +#define STM32_CSI_ENABLED FALSE +#define STM32_HSI48_ENABLED TRUE +#define STM32_HSE_ENABLED TRUE +#define STM32_LSE_ENABLED FALSE +#define STM32_HSIDIV STM32_HSIDIV_DIV1 + +/* + * PLLs static settings. + * Reading STM32 Reference Manual is required. + */ +#define STM32_PLLSRC STM32_PLLSRC_HSE_CK +#define STM32_PLLCFGR_MASK ~0 +#define STM32_PLL1_ENABLED TRUE +#define STM32_PLL1_P_ENABLED TRUE +#define STM32_PLL1_Q_ENABLED TRUE +#define STM32_PLL1_R_ENABLED TRUE +#define STM32_PLL1_DIVM_VALUE 4 +#define STM32_PLL1_DIVN_VALUE 275 +#define STM32_PLL1_FRACN_VALUE 0 +#define STM32_PLL1_DIVP_VALUE 1 +#define STM32_PLL1_DIVQ_VALUE 10 +#define STM32_PLL1_DIVR_VALUE 4 +#define STM32_PLL2_ENABLED TRUE +#define STM32_PLL2_P_ENABLED TRUE +#define STM32_PLL2_Q_ENABLED TRUE +#define STM32_PLL2_R_ENABLED TRUE +#define STM32_PLL2_DIVM_VALUE 4 +#define STM32_PLL2_DIVN_VALUE 400 +#define STM32_PLL2_FRACN_VALUE 0 +#define STM32_PLL2_DIVP_VALUE 40 +#define STM32_PLL2_DIVQ_VALUE 8 +#define STM32_PLL2_DIVR_VALUE 8 +#define STM32_PLL3_ENABLED TRUE +#define STM32_PLL3_P_ENABLED TRUE +#define STM32_PLL3_Q_ENABLED TRUE +#define STM32_PLL3_R_ENABLED TRUE +#define STM32_PLL3_DIVM_VALUE 4 +#define STM32_PLL3_DIVN_VALUE 240 +#define STM32_PLL3_FRACN_VALUE 0 +#define STM32_PLL3_DIVP_VALUE 10 +#define STM32_PLL3_DIVQ_VALUE 10 +#define STM32_PLL3_DIVR_VALUE 10 + +/* + * Core clocks dynamic settings (can be changed at runtime). + * Reading STM32 Reference Manual is required. + */ +#define STM32_SW STM32_SW_PLL1_P_CK +#define STM32_RTCSEL STM32_RTCSEL_LSI_CK +#define STM32_D1CPRE STM32_D1CPRE_DIV1 +#define STM32_D1HPRE STM32_D1HPRE_DIV2 +#define STM32_D1PPRE3 STM32_D1PPRE3_DIV2 +#define STM32_D2PPRE1 STM32_D2PPRE1_DIV2 +#define STM32_D2PPRE2 STM32_D2PPRE2_DIV2 +#define STM32_D3PPRE4 STM32_D3PPRE4_DIV2 + +/* + * Peripherals clocks static settings. + * Reading STM32 Reference Manual is required. + */ +#define STM32_MCO1SEL STM32_MCO1SEL_HSI_CK +#define STM32_MCO1PRE_VALUE 4 +#define STM32_MCO2SEL STM32_MCO2SEL_SYS_CK +#define STM32_MCO2PRE_VALUE 4 +#define STM32_TIMPRE_ENABLE TRUE +#define STM32_HRTIMSEL 0 +#define STM32_STOPKERWUCK 0 +#define STM32_STOPWUCK 0 +#define STM32_RTCPRE_VALUE 8 +#define STM32_CKPERSEL STM32_CKPERSEL_HSE_CK +#define STM32_SDMMCSEL STM32_SDMMCSEL_PLL1_Q_CK +#define STM32_OCTOSPISEL STM32_OCTOSPISEL_HCLK +#define STM32_FMCSEL STM32_FMCSEL_HCLK +#define STM32_SWPSEL STM32_SWPSEL_PCLK1 +#define STM32_FDCANSEL STM32_FDCANSEL_HSE_CK +#define STM32_DFSDM1SEL STM32_DFSDM1SEL_PCLK2 +#define STM32_SPDIFSEL STM32_SPDIFSEL_PLL1_Q_CK +#define STM32_SPI45SEL STM32_SPI45SEL_PCLK2 +#define STM32_SPI123SEL STM32_SPI123SEL_PLL1_Q_CK +#define STM32_SAI1SEL STM32_SAI1SEL_PLL1_Q_CK +#define STM32_LPTIM1SEL STM32_LPTIM1SEL_PCLK1 +#define STM32_CECSEL STM32_CECSEL_LSE_CK +#define STM32_USBSEL STM32_USBSEL_PLL3_Q_CK +#define STM32_I2C1235SEL STM32_I2C1235SEL_PCLK1 +#define STM32_RNGSEL STM32_RNGSEL_PLL1_Q_CK +#define STM32_USART16910SEL STM32_USART16910SEL_PCLK2 +#define STM32_USART234578SEL STM32_USART234578SEL_PCLK1 +#define STM32_SPI6SEL STM32_SPI6SEL_PCLK4 +#define STM32_SAI4BSEL STM32_SAI4BSEL_PLL1_Q_CK +#define STM32_SAI4ASEL STM32_SAI4ASEL_PLL1_Q_CK +#define STM32_ADCSEL STM32_ADCSEL_PLL2_P_CK +#define STM32_LPTIM345SEL STM32_LPTIM345SEL_PCLK4 +#define STM32_LPTIM2SEL STM32_LPTIM2SEL_PCLK4 +#define STM32_I2C4SEL STM32_I2C4SEL_PCLK4 +#define STM32_LPUART1SEL STM32_LPUART1SEL_PCLK4 + +/* + * IRQ system settings. + */ +#define STM32_IRQ_EXTI0_PRIORITY 6 +#define STM32_IRQ_EXTI1_PRIORITY 6 +#define STM32_IRQ_EXTI2_PRIORITY 6 +#define STM32_IRQ_EXTI3_PRIORITY 6 +#define STM32_IRQ_EXTI4_PRIORITY 6 +#define STM32_IRQ_EXTI5_9_PRIORITY 6 +#define STM32_IRQ_EXTI10_15_PRIORITY 6 +#define STM32_IRQ_EXTI16_PRIORITY 6 +#define STM32_IRQ_EXTI17_PRIORITY 6 +#define STM32_IRQ_EXTI18_PRIORITY 6 +#define STM32_IRQ_EXTI19_PRIORITY 6 +#define STM32_IRQ_EXTI20_21_PRIORITY 6 + +#define STM32_IRQ_FDCAN1_PRIORITY 10 +#define STM32_IRQ_FDCAN2_PRIORITY 10 + +#define STM32_IRQ_MDMA_PRIORITY 9 + +#define STM32_IRQ_OCTOSPI1_PRIORITY 10 +#define STM32_IRQ_OCTOSPI2_PRIORITY 10 + +#define STM32_IRQ_SDMMC1_PRIORITY 9 +#define STM32_IRQ_SDMMC2_PRIORITY 9 + +#define STM32_IRQ_TIM1_UP_PRIORITY 7 +#define STM32_IRQ_TIM1_CC_PRIORITY 7 +#define STM32_IRQ_TIM2_PRIORITY 7 +#define STM32_IRQ_TIM3_PRIORITY 7 +#define STM32_IRQ_TIM4_PRIORITY 7 +#define STM32_IRQ_TIM5_PRIORITY 7 +#define STM32_IRQ_TIM6_PRIORITY 7 +#define STM32_IRQ_TIM7_PRIORITY 7 +#define STM32_IRQ_TIM8_BRK_TIM12_PRIORITY 7 +#define STM32_IRQ_TIM8_UP_TIM13_PRIORITY 7 +#define STM32_IRQ_TIM8_TRGCO_TIM14_PRIORITY 7 +#define STM32_IRQ_TIM8_CC_PRIORITY 7 +#define STM32_IRQ_TIM15_PRIORITY 7 +#define STM32_IRQ_TIM16_PRIORITY 7 +#define STM32_IRQ_TIM17_PRIORITY 7 + +#define STM32_IRQ_USART1_PRIORITY 12 +#define STM32_IRQ_USART2_PRIORITY 12 +#define STM32_IRQ_USART3_PRIORITY 12 +#define STM32_IRQ_UART4_PRIORITY 12 +#define STM32_IRQ_UART5_PRIORITY 12 +#define STM32_IRQ_USART6_PRIORITY 12 +#define STM32_IRQ_UART7_PRIORITY 12 +#define STM32_IRQ_UART8_PRIORITY 12 +#define STM32_IRQ_UART9_PRIORITY 12 +#define STM32_IRQ_USART10_PRIORITY 12 +#define STM32_IRQ_LPUART1_PRIORITY 12 + +/* + * ADC driver system settings. + */ +#define STM32_ADC_DUAL_MODE FALSE +#define STM32_ADC_SAMPLES_SIZE 16 +#define STM32_ADC_USE_ADC12 FALSE +#define STM32_ADC_ADC12_DMA_STREAM STM32_DMA_STREAM_ID_ANY +#define STM32_ADC_ADC12_DMA_PRIORITY 2 +#define STM32_ADC_ADC12_IRQ_PRIORITY 5 +#define STM32_ADC_ADC12_CLOCK_MODE ADC_CCR_CKMODE_AHB_DIV4 + +/* + * CAN driver system settings. + */ +#define STM32_CAN_USE_FDCAN1 FALSE +#define STM32_CAN_USE_FDCAN2 FALSE + +/* + * DAC driver system settings. + */ +#define STM32_DAC_DUAL_MODE FALSE +#define STM32_DAC_USE_DAC1_CH1 FALSE +#define STM32_DAC_USE_DAC1_CH2 FALSE +#define STM32_DAC_DAC1_CH1_IRQ_PRIORITY 10 +#define STM32_DAC_DAC1_CH2_IRQ_PRIORITY 10 +#define STM32_DAC_DAC1_CH1_DMA_PRIORITY 2 +#define STM32_DAC_DAC1_CH2_DMA_PRIORITY 2 +#define STM32_DAC_DAC1_CH1_DMA_STREAM STM32_DMA_STREAM_ID_ANY +#define STM32_DAC_DAC1_CH2_DMA_STREAM STM32_DMA_STREAM_ID_ANY + +/* + * GPT driver system settings. + */ +#define STM32_GPT_USE_TIM1 FALSE +#define STM32_GPT_USE_TIM2 FALSE +#define STM32_GPT_USE_TIM3 FALSE +#define STM32_GPT_USE_TIM4 FALSE +#define STM32_GPT_USE_TIM5 FALSE +#define STM32_GPT_USE_TIM6 FALSE +#define STM32_GPT_USE_TIM7 FALSE +#define STM32_GPT_USE_TIM8 FALSE +#define STM32_GPT_USE_TIM12 FALSE +#define STM32_GPT_USE_TIM13 FALSE +#define STM32_GPT_USE_TIM14 FALSE +#define STM32_GPT_USE_TIM15 FALSE +#define STM32_GPT_USE_TIM16 FALSE +#define STM32_GPT_USE_TIM17 FALSE + +/* + * I2C driver system settings. + */ +#define STM32_I2C_USE_I2C1 FALSE +#define STM32_I2C_USE_I2C2 FALSE +#define STM32_I2C_USE_I2C3 FALSE +#define STM32_I2C_USE_I2C4 FALSE +#define STM32_I2C_BUSY_TIMEOUT 50 +#define STM32_I2C_I2C1_RX_DMA_STREAM STM32_DMA_STREAM_ID_ANY +#define STM32_I2C_I2C1_TX_DMA_STREAM STM32_DMA_STREAM_ID_ANY +#define STM32_I2C_I2C2_RX_DMA_STREAM STM32_DMA_STREAM_ID_ANY +#define STM32_I2C_I2C2_TX_DMA_STREAM STM32_DMA_STREAM_ID_ANY +#define STM32_I2C_I2C3_RX_DMA_STREAM STM32_DMA_STREAM_ID_ANY +#define STM32_I2C_I2C3_TX_DMA_STREAM STM32_DMA_STREAM_ID_ANY +#define STM32_I2C_I2C4_RX_BDMA_STREAM STM32_BDMA_STREAM_ID_ANY +#define STM32_I2C_I2C4_TX_BDMA_STREAM STM32_BDMA_STREAM_ID_ANY +#define STM32_I2C_I2C1_IRQ_PRIORITY 5 +#define STM32_I2C_I2C2_IRQ_PRIORITY 5 +#define STM32_I2C_I2C3_IRQ_PRIORITY 5 +#define STM32_I2C_I2C4_IRQ_PRIORITY 5 +#define STM32_I2C_I2C1_DMA_PRIORITY 3 +#define STM32_I2C_I2C2_DMA_PRIORITY 3 +#define STM32_I2C_I2C3_DMA_PRIORITY 3 +#define STM32_I2C_I2C4_DMA_PRIORITY 3 +#define STM32_I2C_DMA_ERROR_HOOK(i2cp) osalSysHalt("DMA failure") + +/* + * ICU driver system settings. + */ +#define STM32_ICU_USE_TIM1 FALSE +#define STM32_ICU_USE_TIM2 FALSE +#define STM32_ICU_USE_TIM3 FALSE +#define STM32_ICU_USE_TIM4 FALSE +#define STM32_ICU_USE_TIM5 FALSE +#define STM32_ICU_USE_TIM8 FALSE +#define STM32_ICU_USE_TIM12 FALSE +#define STM32_ICU_USE_TIM13 FALSE +#define STM32_ICU_USE_TIM14 FALSE +#define STM32_ICU_USE_TIM15 FALSE +#define STM32_ICU_USE_TIM16 FALSE +#define STM32_ICU_USE_TIM17 FALSE + +/* + * MAC driver system settings. + */ +#define STM32_MAC_TRANSMIT_BUFFERS 2 +#define STM32_MAC_RECEIVE_BUFFERS 4 +#define STM32_MAC_BUFFERS_SIZE 1522 +#define STM32_MAC_PHY_TIMEOUT 100 +#define STM32_MAC_ETH1_CHANGE_PHY_STATE TRUE +#define STM32_MAC_ETH1_IRQ_PRIORITY 13 +#define STM32_MAC_IP_CHECKSUM_OFFLOAD 0 + +/* + * PWM driver system settings. + */ +#define STM32_PWM_USE_TIM1 FALSE +#define STM32_PWM_USE_TIM2 FALSE +#define STM32_PWM_USE_TIM3 FALSE +#define STM32_PWM_USE_TIM4 FALSE +#define STM32_PWM_USE_TIM5 FALSE +#define STM32_PWM_USE_TIM8 FALSE +#define STM32_PWM_USE_TIM12 FALSE +#define STM32_PWM_USE_TIM13 FALSE +#define STM32_PWM_USE_TIM14 FALSE +#define STM32_PWM_USE_TIM15 FALSE +#define STM32_PWM_USE_TIM16 FALSE +#define STM32_PWM_USE_TIM17 FALSE + +/* + * RTC driver system settings. + */ +#define STM32_RTC_PRESA_VALUE 32 +#define STM32_RTC_PRESS_VALUE 1024 +#define STM32_RTC_CR_INIT 0 +#define STM32_RTC_TAMPCR_INIT 0 + +/* + * SDC driver system settings. + */ +#define STM32_SDC_USE_SDMMC1 FALSE +#define STM32_SDC_USE_SDMMC2 FALSE +#define STM32_SDC_SDMMC_UNALIGNED_SUPPORT TRUE +#define STM32_SDC_SDMMC_WRITE_TIMEOUT 10000 +#define STM32_SDC_SDMMC_READ_TIMEOUT 10000 +#define STM32_SDC_SDMMC_CLOCK_DELAY 10 +#define STM32_SDC_SDMMC_PWRSAV TRUE + +/* + * SERIAL driver system settings. + */ +#define STM32_SERIAL_USE_USART1 FALSE +#define STM32_SERIAL_USE_USART2 FALSE +#define STM32_SERIAL_USE_USART3 FALSE +#define STM32_SERIAL_USE_UART4 FALSE +#define STM32_SERIAL_USE_UART5 FALSE +#define STM32_SERIAL_USE_USART6 FALSE +#define STM32_SERIAL_USE_UART7 FALSE +#define STM32_SERIAL_USE_UART8 FALSE +#define STM32_SERIAL_USE_UART9 FALSE +#define STM32_SERIAL_USE_USART10 FALSE +#define STM32_SERIAL_USE_LPUART1 FALSE + +/* + * SIO driver system settings. + */ +#define STM32_SIO_USE_USART1 FALSE +#define STM32_SIO_USE_USART2 FALSE +#define STM32_SIO_USE_USART3 FALSE +#define STM32_SIO_USE_UART4 FALSE +#define STM32_SIO_USE_UART5 FALSE +#define STM32_SIO_USE_USART6 FALSE +#define STM32_SIO_USE_UART7 FALSE +#define STM32_SIO_USE_UART8 FALSE +#define STM32_SIO_USE_UART9 FALSE +#define STM32_SIO_USE_USART10 FALSE +#define STM32_SIO_USE_LPUART1 FALSE + +/* + * SPI driver system settings. + */ +#define STM32_SPI_USE_SPI1 FALSE +#define STM32_SPI_USE_SPI2 FALSE +#define STM32_SPI_USE_SPI3 FALSE +#define STM32_SPI_USE_SPI4 FALSE +#define STM32_SPI_USE_SPI5 FALSE +#define STM32_SPI_USE_SPI6 FALSE +#define STM32_SPI_SPI1_RX_DMA_STREAM STM32_DMA_STREAM_ID_ANY +#define STM32_SPI_SPI1_TX_DMA_STREAM STM32_DMA_STREAM_ID_ANY +#define STM32_SPI_SPI2_RX_DMA_STREAM STM32_DMA_STREAM_ID_ANY +#define STM32_SPI_SPI2_TX_DMA_STREAM STM32_DMA_STREAM_ID_ANY +#define STM32_SPI_SPI3_RX_DMA_STREAM STM32_DMA_STREAM_ID_ANY +#define STM32_SPI_SPI3_TX_DMA_STREAM STM32_DMA_STREAM_ID_ANY +#define STM32_SPI_SPI4_RX_DMA_STREAM STM32_DMA_STREAM_ID_ANY +#define STM32_SPI_SPI4_TX_DMA_STREAM STM32_DMA_STREAM_ID_ANY +#define STM32_SPI_SPI5_RX_DMA_STREAM STM32_DMA_STREAM_ID_ANY +#define STM32_SPI_SPI5_TX_DMA_STREAM STM32_DMA_STREAM_ID_ANY +#define STM32_SPI_SPI6_RX_BDMA_STREAM STM32_BDMA_STREAM_ID_ANY +#define STM32_SPI_SPI6_TX_BDMA_STREAM STM32_BDMA_STREAM_ID_ANY +#define STM32_SPI_SPI1_DMA_PRIORITY 1 +#define STM32_SPI_SPI2_DMA_PRIORITY 1 +#define STM32_SPI_SPI3_DMA_PRIORITY 1 +#define STM32_SPI_SPI4_DMA_PRIORITY 1 +#define STM32_SPI_SPI5_DMA_PRIORITY 1 +#define STM32_SPI_SPI6_DMA_PRIORITY 1 +#define STM32_SPI_SPI1_IRQ_PRIORITY 10 +#define STM32_SPI_SPI2_IRQ_PRIORITY 10 +#define STM32_SPI_SPI3_IRQ_PRIORITY 10 +#define STM32_SPI_SPI4_IRQ_PRIORITY 10 +#define STM32_SPI_SPI5_IRQ_PRIORITY 10 +#define STM32_SPI_SPI6_IRQ_PRIORITY 10 +#define STM32_SPI_DMA_ERROR_HOOK(spip) osalSysHalt("DMA failure") + +/* + * ST driver system settings. + */ +#define STM32_ST_IRQ_PRIORITY 8 +#define STM32_ST_USE_TIMER 2 + +/* + * TRNG driver system settings. + */ +#define STM32_TRNG_USE_RNG1 FALSE + +/* + * UART driver system settings. + */ +#define STM32_UART_USE_USART1 FALSE +#define STM32_UART_USE_USART2 FALSE +#define STM32_UART_USE_USART3 FALSE +#define STM32_UART_USE_UART4 FALSE +#define STM32_UART_USE_UART5 FALSE +#define STM32_UART_USE_USART6 FALSE +#define STM32_UART_USE_UART7 FALSE +#define STM32_UART_USE_UART8 FALSE +#define STM32_UART_USE_UART9 FALSE +#define STM32_UART_USE_USART10 FALSE +#define STM32_UART_USART1_RX_DMA_STREAM STM32_DMA_STREAM_ID_ANY +#define STM32_UART_USART1_TX_DMA_STREAM STM32_DMA_STREAM_ID_ANY +#define STM32_UART_USART2_RX_DMA_STREAM STM32_DMA_STREAM_ID_ANY +#define STM32_UART_USART2_TX_DMA_STREAM STM32_DMA_STREAM_ID_ANY +#define STM32_UART_USART3_RX_DMA_STREAM STM32_DMA_STREAM_ID_ANY +#define STM32_UART_USART3_TX_DMA_STREAM STM32_DMA_STREAM_ID_ANY +#define STM32_UART_UART4_RX_DMA_STREAM STM32_DMA_STREAM_ID_ANY +#define STM32_UART_UART4_TX_DMA_STREAM STM32_DMA_STREAM_ID_ANY +#define STM32_UART_UART5_RX_DMA_STREAM STM32_DMA_STREAM_ID_ANY +#define STM32_UART_UART5_TX_DMA_STREAM STM32_DMA_STREAM_ID_ANY +#define STM32_UART_USART6_RX_DMA_STREAM STM32_DMA_STREAM_ID_ANY +#define STM32_UART_USART6_TX_DMA_STREAM STM32_DMA_STREAM_ID_ANY +#define STM32_UART_UART7_RX_DMA_STREAM STM32_DMA_STREAM_ID_ANY +#define STM32_UART_UART7_TX_DMA_STREAM STM32_DMA_STREAM_ID_ANY +#define STM32_UART_UART8_RX_DMA_STREAM STM32_DMA_STREAM_ID_ANY +#define STM32_UART_UART8_TX_DMA_STREAM STM32_DMA_STREAM_ID_ANY +#define STM32_UART_UART9_RX_DMA_STREAM STM32_DMA_STREAM_ID_ANY +#define STM32_UART_UART9_TX_DMA_STREAM STM32_DMA_STREAM_ID_ANY +#define STM32_UART_USART10_RX_DMA_STREAM STM32_DMA_STREAM_ID_ANY +#define STM32_UART_USART10_TX_DMA_STREAM STM32_DMA_STREAM_ID_ANY +#define STM32_UART_USART1_DMA_PRIORITY 0 +#define STM32_UART_USART2_DMA_PRIORITY 0 +#define STM32_UART_USART3_DMA_PRIORITY 0 +#define STM32_UART_UART4_DMA_PRIORITY 0 +#define STM32_UART_UART5_DMA_PRIORITY 0 +#define STM32_UART_USART6_DMA_PRIORITY 0 +#define STM32_UART_UART7_DMA_PRIORITY 0 +#define STM32_UART_UART8_DMA_PRIORITY 0 +#define STM32_UART_UART9_DMA_PRIORITY 0 +#define STM32_UART_USART10_DMA_PRIORITY 0 +#define STM32_UART_DMA_ERROR_HOOK(uartp) osalSysHalt("DMA failure") + +/* + * USB driver system settings. + */ +#define STM32_USB_USE_OTG2 TRUE +#define STM32_USB_OTG2_IRQ_PRIORITY 14 +#define STM32_USB_OTG2_RX_FIFO_SIZE 1024 +#define STM32_USB_HOST_WAKEUP_DURATION 2 + +/* + * WDG driver system settings. + */ +#define STM32_WDG_USE_IWDG FALSE + +/* + * WSPI driver system settings. + */ +#define STM32_WSPI_USE_OCTOSPI1 FALSE +#define STM32_WSPI_USE_OCTOSPI2 FALSE +#define STM32_WSPI_OCTOSPI1_PRESCALER_VALUE 1 +#define STM32_WSPI_OCTOSPI2_PRESCALER_VALUE 1 +#define STM32_WSPI_OCTOSPI1_SSHIFT FALSE +#define STM32_WSPI_OCTOSPI2_SSHIFT FALSE +#define STM32_WSPI_OCTOSPI1_DHQC FALSE +#define STM32_WSPI_OCTOSPI2_DHQC FALSE +#define STM32_WSPI_OCTOSPI1_MDMA_CHANNEL STM32_MDMA_CHANNEL_ID_ANY +#define STM32_WSPI_OCTOSPI2_MDMA_CHANNEL STM32_MDMA_CHANNEL_ID_ANY +#define STM32_WSPI_OCTOSPI1_MDMA_PRIORITY 1 +#define STM32_WSPI_OCTOSPI2_MDMA_PRIORITY 1 +#define STM32_WSPI_OCTOSPI1_MDMA_IRQ_PRIORITY 10 +#define STM32_WSPI_OCTOSPI2_MDMA_IRQ_PRIORITY 10 +#define STM32_WSPI_DMA_ERROR_HOOK(wspip) osalSysHalt("MDMA failure") + +#endif /* MCUCONF_H */ diff --git a/platforms/chibios/boards/GENERIC_WB32_F3G71XX/board/board.c b/platforms/chibios/boards/GENERIC_WB32_F3G71XX/board/board.c index f74c9e8be7..e38a7e0054 100644 --- a/platforms/chibios/boards/GENERIC_WB32_F3G71XX/board/board.c +++ b/platforms/chibios/boards/GENERIC_WB32_F3G71XX/board/board.c @@ -80,7 +80,3 @@ void __early_init(void) { void boardInit(void) { } - -void restart_usb_driver(USBDriver *usbp) { - // Do nothing. Restarting the USB driver on these boards breaks it. -} diff --git a/platforms/chibios/boards/GENERIC_WB32_FQ95XX/board/board.c b/platforms/chibios/boards/GENERIC_WB32_FQ95XX/board/board.c index a99537fc27..22b4ff73b5 100644 --- a/platforms/chibios/boards/GENERIC_WB32_FQ95XX/board/board.c +++ b/platforms/chibios/boards/GENERIC_WB32_FQ95XX/board/board.c @@ -80,7 +80,3 @@ void __early_init(void) { void boardInit(void) { } - -void restart_usb_driver(USBDriver *usbp) { - // Do nothing. Restarting the USB driver on these boards breaks it. -} diff --git a/platforms/chibios/boards/IC_TEENSY_3_1/board/board.c b/platforms/chibios/boards/IC_TEENSY_3_1/board/board.c index 424e0c975b..36ae8051ee 100644 --- a/platforms/chibios/boards/IC_TEENSY_3_1/board/board.c +++ b/platforms/chibios/boards/IC_TEENSY_3_1/board/board.c @@ -144,8 +144,3 @@ void __early_init(void) { * @todo Add your board-specific code, if any. */ void boardInit(void) {} - - -void restart_usb_driver(USBDriver *usbp) { - // Do nothing. Restarting the USB driver on these boards breaks it. -} diff --git a/platforms/chibios/boards/PJRC_TEENSY_3_5/board/extra.c b/platforms/chibios/boards/PJRC_TEENSY_3_5/board/extra.c deleted file mode 100644 index 4940d6d99b..0000000000 --- a/platforms/chibios/boards/PJRC_TEENSY_3_5/board/extra.c +++ /dev/null @@ -1,7 +0,0 @@ -#include <hal.h> - -void restart_usb_driver(USBDriver *usbp) { - // Do nothing. Restarting the USB driver on the Teensy 3.6 breaks it, - // resulting in a keyboard which can wake up a PC from Suspend-to-RAM, but - // does not actually produce any keypresses until you un-plug and re-plug. -} diff --git a/platforms/chibios/boards/PJRC_TEENSY_3_6/board/board.mk b/platforms/chibios/boards/PJRC_TEENSY_3_6/board/board.mk deleted file mode 100644 index aba195db04..0000000000 --- a/platforms/chibios/boards/PJRC_TEENSY_3_6/board/board.mk +++ /dev/null @@ -1,11 +0,0 @@ -include $(CHIBIOS_CONTRIB)/os/hal/boards/PJRC_TEENSY_3_6/board.mk - -# List of all the board related files. -BOARDSRC += $(BOARD_PATH)/board/extra.c - -# Required include directories -BOARDINC += $(BOARD_PATH)/board - -# Shared variables -ALLCSRC += $(BOARDSRC) -ALLINC += $(BOARDINC) diff --git a/platforms/chibios/boards/PJRC_TEENSY_3_6/board/extra.c b/platforms/chibios/boards/PJRC_TEENSY_3_6/board/extra.c deleted file mode 100644 index 4940d6d99b..0000000000 --- a/platforms/chibios/boards/PJRC_TEENSY_3_6/board/extra.c +++ /dev/null @@ -1,7 +0,0 @@ -#include <hal.h> - -void restart_usb_driver(USBDriver *usbp) { - // Do nothing. Restarting the USB driver on the Teensy 3.6 breaks it, - // resulting in a keyboard which can wake up a PC from Suspend-to-RAM, but - // does not actually produce any keypresses until you un-plug and re-plug. -} diff --git a/platforms/chibios/boards/QMK_BLOK/configs/mcuconf.h b/platforms/chibios/boards/QMK_BLOK/configs/mcuconf.h index eb51e25171..0c2ef592d6 100644 --- a/platforms/chibios/boards/QMK_BLOK/configs/mcuconf.h +++ b/platforms/chibios/boards/QMK_BLOK/configs/mcuconf.h @@ -106,7 +106,6 @@ #define RP_USB_USE_USBD0 TRUE #define RP_USB_FORCE_VBUS_DETECT TRUE #define RP_USE_EXTERNAL_VBUS_DETECT FALSE -#define RP_USB_USE_SOF_INTR TRUE #define RP_USB_USE_ERROR_DATA_SEQ_INTR FALSE #endif /* MCUCONF_H */ diff --git a/platforms/chibios/boards/QMK_PM2040/configs/mcuconf.h b/platforms/chibios/boards/QMK_PM2040/configs/mcuconf.h index f19f08e93c..493dcf6434 100644 --- a/platforms/chibios/boards/QMK_PM2040/configs/mcuconf.h +++ b/platforms/chibios/boards/QMK_PM2040/configs/mcuconf.h @@ -106,7 +106,6 @@ #define RP_USB_USE_USBD0 TRUE #define RP_USB_FORCE_VBUS_DETECT TRUE #define RP_USE_EXTERNAL_VBUS_DETECT FALSE -#define RP_USB_USE_SOF_INTR TRUE #define RP_USB_USE_ERROR_DATA_SEQ_INTR FALSE #endif /* MCUCONF_H */ diff --git a/platforms/chibios/bootloaders/stm32_dfu.c b/platforms/chibios/bootloaders/stm32_dfu.c index f845bf21e9..fba3086e7a 100644 --- a/platforms/chibios/bootloaders/stm32_dfu.c +++ b/platforms/chibios/bootloaders/stm32_dfu.c @@ -1,4 +1,4 @@ -/* Copyright 2021 QMK +/* Copyright 2021-2023 QMK * * This program is free software: you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by @@ -15,12 +15,17 @@ */ #include "bootloader.h" +#include "util.h" #include <ch.h> #include <hal.h> #include "wait.h" -extern uint32_t __ram0_end__; +#ifndef STM32_BOOTLOADER_RAM_SYMBOL +# define STM32_BOOTLOADER_RAM_SYMBOL __ram0_end__ +#endif + +extern uint32_t STM32_BOOTLOADER_RAM_SYMBOL; #ifndef STM32_BOOTLOADER_DUAL_BANK # define STM32_BOOTLOADER_DUAL_BANK FALSE @@ -72,10 +77,25 @@ void enter_bootloader_mode_if_requested(void) {} /* This code should be checked whether it runs correctly on platforms */ # define SYMVAL(sym) (uint32_t)(((uint8_t *)&(sym)) - ((uint8_t *)0)) # define BOOTLOADER_MAGIC 0xDEADBEEF -# define MAGIC_ADDR (unsigned long *)(SYMVAL(__ram0_end__) - 4) +# define MAGIC_ADDR (unsigned long *)(SYMVAL(STM32_BOOTLOADER_RAM_SYMBOL) - 4) + +__attribute__((weak)) void bootloader_marker_enable(void) { + uint32_t *marker = (uint32_t *)MAGIC_ADDR; + *marker = BOOTLOADER_MAGIC; // set magic flag => reset handler will jump into boot loader +} + +__attribute__((weak)) bool bootloader_marker_active(void) { + const uint32_t *marker = (const uint32_t *)MAGIC_ADDR; + return (*marker == BOOTLOADER_MAGIC) ? true : false; +} + +__attribute__((weak)) void bootloader_marker_disable(void) { + uint32_t *marker = (uint32_t *)MAGIC_ADDR; + *marker = 0; +} __attribute__((weak)) void bootloader_jump(void) { - *MAGIC_ADDR = BOOTLOADER_MAGIC; // set magic flag => reset handler will jump into boot loader + bootloader_marker_enable(); NVIC_SystemReset(); } @@ -84,18 +104,44 @@ __attribute__((weak)) void mcu_reset(void) { } void enter_bootloader_mode_if_requested(void) { - unsigned long *check = MAGIC_ADDR; - if (*check == BOOTLOADER_MAGIC) { - *check = 0; + if (bootloader_marker_active()) { + bootloader_marker_disable(); + + struct system_memory_vector_t { + uint32_t stack_top; + void (*entrypoint)(void); + }; + const struct system_memory_vector_t *bootloader = (const struct system_memory_vector_t *)(STM32_BOOTLOADER_ADDRESS); + + __disable_irq(); + +# if defined(QMK_MCU_ARCH_CORTEX_M7) + SCB_DisableDCache(); + SCB_DisableICache(); +# endif + +# if defined(__MPU_PRESENT) && (__MPU_PRESENT == 1U) + ARM_MPU_Disable(); +# endif + + SysTick->CTRL = 0; + SysTick->VAL = 0; + SysTick->LOAD = 0; + + // Clear interrupt enable and interrupt pending registers + for (int i = 0; i < ARRAY_SIZE(NVIC->ICER); i++) { + NVIC->ICER[i] = 0xFFFFFFFF; + NVIC->ICPR[i] = 0xFFFFFFFF; + } + __set_CONTROL(0); - __set_MSP(*(__IO uint32_t *)STM32_BOOTLOADER_ADDRESS); + __set_MSP(bootloader->stack_top); __enable_irq(); - typedef void (*BootJump_t)(void); - BootJump_t boot_jump = *(BootJump_t *)(STM32_BOOTLOADER_ADDRESS + 4); - boot_jump(); - while (1) - ; + // Jump to bootloader + bootloader->entrypoint(); + while (true) { + } } } #endif diff --git a/platforms/chibios/chibios_config.h b/platforms/chibios/chibios_config.h index 52632a051e..1f8a7842fe 100644 --- a/platforms/chibios/chibios_config.h +++ b/platforms/chibios/chibios_config.h @@ -71,7 +71,11 @@ // STM32 compatibility #if defined(MCU_STM32) -# define CPU_CLOCK STM32_SYSCLK +# if defined(STM32_CORE_CK) +# define CPU_CLOCK STM32_CORE_CK +# else +# define CPU_CLOCK STM32_SYSCLK +# endif # if defined(STM32F1XX) # define USE_GPIOV1 diff --git a/platforms/chibios/config.h b/platforms/chibios/config.h new file mode 100644 index 0000000000..006415a5dc --- /dev/null +++ b/platforms/chibios/config.h @@ -0,0 +1,7 @@ +// Copyright 2023 Nick Brassel (@tzarc) +// SPDX-License-Identifier: GPL-2.0-or-later +#pragma once + +#ifndef CORTEX_ENABLE_WFI_IDLE +# define CORTEX_ENABLE_WFI_IDLE TRUE +#endif // CORTEX_ENABLE_WFI_IDLE diff --git a/platforms/chibios/mcu_selection.mk b/platforms/chibios/mcu_selection.mk index f14b16b169..5122ed4634 100644 --- a/platforms/chibios/mcu_selection.mk +++ b/platforms/chibios/mcu_selection.mk @@ -705,6 +705,45 @@ ifneq (,$(filter $(MCU),STM32L412 STM32L422)) STM32_BOOTLOADER_ADDRESS ?= 0x1FFF0000 endif +ifneq (,$(filter $(MCU),STM32H723 STM32H733)) + # Cortex version + MCU = cortex-m7 + + # ARM version, CORTEX-M0/M1 are 6, CORTEX-M3/M4/M7 are 7 + ARMV = 7 + + ## chip/board settings + # - the next two should match the directories in + # <chibios[-contrib]>/os/hal/ports/$(MCU_PORT_NAME)/$(MCU_SERIES) + # OR + # <chibios[-contrib]>/os/hal/ports/$(MCU_FAMILY)/$(MCU_SERIES) + MCU_FAMILY = STM32 + MCU_SERIES = STM32H7xx + + # Linker script to use + # - it should exist either in <chibios>/os/common/startup/ARMCMx/compilers/GCC/ld/ + # or <keyboard_dir>/ld/ + MCU_LDSCRIPT ?= STM32H723xG_ITCM64k + + # Startup code to use + # - it should exist in <chibios>/os/common/startup/ARMCMx/compilers/GCC/mk/ + MCU_STARTUP ?= stm32h7xx + + # Board: it should exist either in <chibios>/os/hal/boards/, + # <keyboard_dir>/boards/, or drivers/boards/ + BOARD ?= GENERIC_STM32_H723XG + + PLATFORM_NAME ?= platform_type2 + + USE_FPU ?= yes + + # UF2 settings + UF2_FAMILY ?= STM32H7 + + # Bootloader address for STM32 DFU + STM32_BOOTLOADER_ADDRESS ?= 0x1FF09800 +endif + ifneq ($(findstring WB32F3G71, $(MCU)),) # Cortex version MCU = cortex-m3 diff --git a/platforms/chibios/platform.mk b/platforms/chibios/platform.mk index 6304b42d87..081b001e6d 100644 --- a/platforms/chibios/platform.mk +++ b/platforms/chibios/platform.mk @@ -432,6 +432,15 @@ else endif endif +# Extra config.h files for the platform +ifneq ("$(wildcard $(PLATFORM_COMMON_DIR)/vendors/$(MCU_FAMILY)/$(MCU_SERIES)/config.h)","") + CONFIG_H += $(PLATFORM_COMMON_DIR)/vendors/$(MCU_FAMILY)/$(MCU_SERIES)/config.h +endif +ifneq ("$(wildcard $(PLATFORM_COMMON_DIR)/vendors/$(MCU_FAMILY)/config.h)","") + CONFIG_H += $(PLATFORM_COMMON_DIR)/vendors/$(MCU_FAMILY)/config.h +endif +CONFIG_H += $(PLATFORM_COMMON_DIR)/config.h + # Assembler flags ASFLAGS += $(SHARED_ASFLAGS) $(TOOLCHAIN_ASFLAGS) diff --git a/platforms/chibios/sleep_led.c b/platforms/chibios/sleep_led.c index a777d60468..a35514bf2e 100644 --- a/platforms/chibios/sleep_led.c +++ b/platforms/chibios/sleep_led.c @@ -41,17 +41,20 @@ void sleep_led_timer_callback(void) { uint8_t duration : 2; uint8_t index : 6; } pwm; - } timer = {.row = 0}; + } timer = {.row = 0}; + static led_t led_state = {0}; timer.row++; // LED on if (timer.pwm.count == 0) { - led_set(1 << USB_LED_CAPS_LOCK); + led_state.caps_lock = true; + led_set(led_state.raw); } // LED off if (timer.pwm.count == breathing_table[timer.pwm.index]) { - led_set(0); + led_state.caps_lock = false; + led_set(led_state.raw); } } @@ -190,7 +193,7 @@ void sleep_led_toggle(void) { void sleep_led_init(void) {} void sleep_led_enable(void) { - led_set(1 << USB_LED_CAPS_LOCK); + led_set(2); // Caps Lock } void sleep_led_disable(void) { diff --git a/platforms/chibios/suspend.c b/platforms/chibios/suspend.c index ce03433e3a..a937ccf059 100644 --- a/platforms/chibios/suspend.c +++ b/platforms/chibios/suspend.c @@ -42,6 +42,7 @@ void suspend_wakeup_init(void) { clear_keys(); #ifdef MOUSEKEY_ENABLE mousekey_clear(); + mousekey_send(); #endif /* MOUSEKEY_ENABLE */ #ifdef PROGRAMMABLE_BUTTON_ENABLE programmable_button_clear(); diff --git a/platforms/chibios/vendors/RP/pico_sdk_shims.c b/platforms/chibios/vendors/RP/pico_sdk_shims.c index 239155c086..caab400531 100644 --- a/platforms/chibios/vendors/RP/pico_sdk_shims.c +++ b/platforms/chibios/vendors/RP/pico_sdk_shims.c @@ -2,7 +2,8 @@ // SPDX-License-Identifier: GPL-2.0-or-later #include <stdbool.h> -#include <ch.h> + +extern void chSysHalt(const char *reason) __attribute__((noreturn)); void panic(const char *fmt, ...) { chSysHalt(fmt); diff --git a/platforms/chibios/wait.c b/platforms/chibios/wait.c index 88cb5e6d54..7fe6d477b8 100644 --- a/platforms/chibios/wait.c +++ b/platforms/chibios/wait.c @@ -21,7 +21,7 @@ #ifdef WAIT_US_TIMER void wait_us(uint16_t duration) { - static const GPTConfig gpt_cfg = {1000000, NULL, 0, 0}; /* 1MHz timer, no callback */ + static const GPTConfig gpt_cfg = {.frequency = 1000000}; /* 1MHz timer, no callback */ if (duration == 0) { duration = 1; diff --git a/quantum/action.c b/quantum/action.c index a45e70c557..84ecf6da9a 100644 --- a/quantum/action.c +++ b/quantum/action.c @@ -882,7 +882,7 @@ __attribute__((weak)) void register_code(uint8_t code) { } else if (KC_LOCKING_CAPS_LOCK == code) { # ifdef LOCKING_RESYNC_ENABLE // Resync: ignore if caps lock already is on - if (host_keyboard_leds() & (1 << USB_LED_CAPS_LOCK)) return; + if (host_keyboard_led_state().caps_lock) return; # endif add_key(KC_CAPS_LOCK); send_keyboard_report(); @@ -892,7 +892,7 @@ __attribute__((weak)) void register_code(uint8_t code) { } else if (KC_LOCKING_NUM_LOCK == code) { # ifdef LOCKING_RESYNC_ENABLE - if (host_keyboard_leds() & (1 << USB_LED_NUM_LOCK)) return; + if (host_keyboard_led_state().num_lock) return; # endif add_key(KC_NUM_LOCK); send_keyboard_report(); @@ -902,7 +902,7 @@ __attribute__((weak)) void register_code(uint8_t code) { } else if (KC_LOCKING_SCROLL_LOCK == code) { # ifdef LOCKING_RESYNC_ENABLE - if (host_keyboard_leds() & (1 << USB_LED_SCROLL_LOCK)) return; + if (host_keyboard_led_state().scroll_lock) return; # endif add_key(KC_SCROLL_LOCK); send_keyboard_report(); @@ -952,7 +952,7 @@ __attribute__((weak)) void unregister_code(uint8_t code) { } else if (KC_LOCKING_CAPS_LOCK == code) { # ifdef LOCKING_RESYNC_ENABLE // Resync: ignore if caps lock already is off - if (!(host_keyboard_leds() & (1 << USB_LED_CAPS_LOCK))) return; + if (!host_keyboard_led_state().caps_lock) return; # endif add_key(KC_CAPS_LOCK); send_keyboard_report(); @@ -961,7 +961,7 @@ __attribute__((weak)) void unregister_code(uint8_t code) { } else if (KC_LOCKING_NUM_LOCK == code) { # ifdef LOCKING_RESYNC_ENABLE - if (!(host_keyboard_leds() & (1 << USB_LED_NUM_LOCK))) return; + if (!host_keyboard_led_state().num_lock) return; # endif add_key(KC_NUM_LOCK); send_keyboard_report(); @@ -970,7 +970,7 @@ __attribute__((weak)) void unregister_code(uint8_t code) { } else if (KC_LOCKING_SCROLL_LOCK == code) { # ifdef LOCKING_RESYNC_ENABLE - if (!(host_keyboard_leds() & (1 << USB_LED_SCROLL_LOCK))) return; + if (!host_keyboard_led_state().scroll_lock) return; # endif add_key(KC_SCROLL_LOCK); send_keyboard_report(); diff --git a/quantum/debounce/asym_eager_defer_pk.c b/quantum/debounce/asym_eager_defer_pk.c index 4745c6f465..0f7640a80c 100644 --- a/quantum/debounce/asym_eager_defer_pk.c +++ b/quantum/debounce/asym_eager_defer_pk.c @@ -144,6 +144,8 @@ static void update_debounce_counters_and_transfer_if_expired(matrix_row_t raw[], static void transfer_matrix_values(matrix_row_t raw[], matrix_row_t cooked[], uint8_t num_rows) { debounce_counter_t *debounce_pointer = debounce_counters; + matrix_need_update = false; + for (uint8_t row = 0; row < num_rows; row++) { matrix_row_t delta = raw[row] ^ cooked[row]; for (uint8_t col = 0; col < MATRIX_COLS; col++) { diff --git a/quantum/debounce/sym_eager_pk.c b/quantum/debounce/sym_eager_pk.c index f736d1645c..15360441de 100644 --- a/quantum/debounce/sym_eager_pk.c +++ b/quantum/debounce/sym_eager_pk.c @@ -125,6 +125,7 @@ static void update_debounce_counters(uint8_t num_rows, uint8_t elapsed_time) { // upload from raw_matrix to final matrix; static void transfer_matrix_values(matrix_row_t raw[], matrix_row_t cooked[], uint8_t num_rows) { + matrix_need_update = false; debounce_counter_t *debounce_pointer = debounce_counters; for (uint8_t row = 0; row < num_rows; row++) { matrix_row_t delta = raw[row] ^ cooked[row]; diff --git a/quantum/debounce/sym_eager_pr.c b/quantum/debounce/sym_eager_pr.c index aad5ca351b..84f897d674 100644 --- a/quantum/debounce/sym_eager_pr.c +++ b/quantum/debounce/sym_eager_pr.c @@ -119,6 +119,7 @@ static void update_debounce_counters(uint8_t num_rows, uint8_t elapsed_time) { // upload from raw_matrix to final matrix; static void transfer_matrix_values(matrix_row_t raw[], matrix_row_t cooked[], uint8_t num_rows) { + matrix_need_update = false; debounce_counter_t *debounce_pointer = debounce_counters; for (uint8_t row = 0; row < num_rows; row++) { matrix_row_t existing_row = cooked[row]; diff --git a/quantum/dynamic_keymap.c b/quantum/dynamic_keymap.c index 90a0f20838..2030c82a1b 100644 --- a/quantum/dynamic_keymap.c +++ b/quantum/dynamic_keymap.c @@ -152,22 +152,13 @@ void dynamic_keymap_reset(void) { for (int layer = 0; layer < DYNAMIC_KEYMAP_LAYER_COUNT; layer++) { for (int row = 0; row < MATRIX_ROWS; row++) { for (int column = 0; column < MATRIX_COLS; column++) { - if (layer < keymap_layer_count()) { - dynamic_keymap_set_keycode(layer, row, column, keycode_at_keymap_location_raw(layer, row, column)); - } else { - dynamic_keymap_set_keycode(layer, row, column, KC_TRANSPARENT); - } + dynamic_keymap_set_keycode(layer, row, column, keycode_at_keymap_location_raw(layer, row, column)); } } #ifdef ENCODER_MAP_ENABLE for (int encoder = 0; encoder < NUM_ENCODERS; encoder++) { - if (layer < encodermap_layer_count()) { - dynamic_keymap_set_encoder(layer, encoder, true, keycode_at_encodermap_location_raw(layer, encoder, true)); - dynamic_keymap_set_encoder(layer, encoder, false, keycode_at_encodermap_location_raw(layer, encoder, false)); - } else { - dynamic_keymap_set_encoder(layer, encoder, true, KC_TRANSPARENT); - dynamic_keymap_set_encoder(layer, encoder, false, KC_TRANSPARENT); - } + dynamic_keymap_set_encoder(layer, encoder, true, keycode_at_encodermap_location_raw(layer, encoder, true)); + dynamic_keymap_set_encoder(layer, encoder, false, keycode_at_encodermap_location_raw(layer, encoder, false)); } #endif // ENCODER_MAP_ENABLE } diff --git a/quantum/keymap.h b/quantum/keymap.h deleted file mode 100644 index a067e1aa36..0000000000 --- a/quantum/keymap.h +++ /dev/null @@ -1,20 +0,0 @@ -/* -Copyright 2012-2016 Jun Wako <wakojun@gmail.com> - -This program is free software: you can redistribute it and/or modify -it under the terms of the GNU General Public License as published by -the Free Software Foundation, either version 2 of the License, or -(at your option) any later version. - -This program is distributed in the hope that it will be useful, -but WITHOUT ANY WARRANTY; without even the implied warranty of -MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -GNU General Public License for more details. - -You should have received a copy of the GNU General Public License -along with this program. If not, see <http://www.gnu.org/licenses/>. -*/ - -#pragma once - -#pragma message("'keymap.h' should no longer be included!") diff --git a/quantum/led.c b/quantum/led.c index 42144566fd..8d86374a6f 100644 --- a/quantum/led.c +++ b/quantum/led.c @@ -153,14 +153,14 @@ __attribute__((weak)) void led_set(uint8_t usb_led) { /** \brief Trigger behaviour on transition to suspend */ void led_suspend(void) { - uint8_t leds_off = 0; + led_t leds_off = {0}; #ifdef BACKLIGHT_CAPS_LOCK if (is_backlight_enabled()) { // Don't try to turn off Caps Lock indicator as it is backlight and backlight is already off - leds_off |= (1 << USB_LED_CAPS_LOCK); + leds_off.caps_lock = true; } #endif - led_set(leds_off); + led_set(leds_off.raw); } /** \brief Trigger behaviour on transition from suspend diff --git a/quantum/led.h b/quantum/led.h index b9ad7ed9ae..b9fad670ae 100644 --- a/quantum/led.h +++ b/quantum/led.h @@ -22,13 +22,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. /* FIXME: Add doxygen comments here. */ -/* keyboard LEDs */ -#define USB_LED_NUM_LOCK 0 -#define USB_LED_CAPS_LOCK 1 -#define USB_LED_SCROLL_LOCK 2 -#define USB_LED_COMPOSE 3 -#define USB_LED_KANA 4 - #ifdef __cplusplus extern "C" { #endif diff --git a/quantum/led_matrix/led_matrix.c b/quantum/led_matrix/led_matrix.c index 828d61641a..4b692d1904 100644 --- a/quantum/led_matrix/led_matrix.c +++ b/quantum/led_matrix/led_matrix.c @@ -366,7 +366,10 @@ void led_matrix_task(void) { case RENDERING: led_task_render(effect); if (effect) { - led_matrix_indicators(); + // Only run the basic indicators in the last render iteration (default there are 5 iterations) + if (led_effect_params.iter == LED_MATRIX_LED_PROCESS_MAX_ITERATIONS) { + led_matrix_indicators(); + } led_matrix_indicators_advanced(&led_effect_params); } break; diff --git a/quantum/led_matrix/led_matrix.h b/quantum/led_matrix/led_matrix.h index c7d360f366..9091f6890b 100644 --- a/quantum/led_matrix/led_matrix.h +++ b/quantum/led_matrix/led_matrix.h @@ -42,8 +42,9 @@ #endif #ifndef LED_MATRIX_LED_PROCESS_LIMIT -# define LED_MATRIX_LED_PROCESS_LIMIT (LED_MATRIX_LED_COUNT + 4) / 5 +# define LED_MATRIX_LED_PROCESS_LIMIT ((LED_MATRIX_LED_COUNT + 4) / 5) #endif +#define LED_MATRIX_LED_PROCESS_MAX_ITERATIONS ((LED_MATRIX_LED_COUNT + LED_MATRIX_LED_PROCESS_LIMIT - 1) / LED_MATRIX_LED_PROCESS_LIMIT) #if defined(LED_MATRIX_LED_PROCESS_LIMIT) && LED_MATRIX_LED_PROCESS_LIMIT > 0 && LED_MATRIX_LED_PROCESS_LIMIT < LED_MATRIX_LED_COUNT # if defined(LED_MATRIX_SPLIT) diff --git a/quantum/mousekey.c b/quantum/mousekey.c index df8aa613be..ede055dc8f 100644 --- a/quantum/mousekey.c +++ b/quantum/mousekey.c @@ -74,7 +74,7 @@ uint8_t mk_time_to_max = MOUSEKEY_TIME_TO_MAX; uint8_t mk_wheel_delay = MOUSEKEY_WHEEL_DELAY / 10; /* milliseconds between repeated motion events (0-255) */ # ifdef MK_KINETIC_SPEED -float mk_wheel_interval = 1000.0f / MOUSEKEY_WHEEL_INITIAL_MOVEMENTS; +uint16_t mk_wheel_interval = 1000U / MOUSEKEY_WHEEL_INITIAL_MOVEMENTS; # else uint8_t mk_wheel_interval = MOUSEKEY_WHEEL_INTERVAL; # endif @@ -190,37 +190,37 @@ const uint16_t mk_decelerated_speed = MOUSEKEY_DECELERATED_SPEED; const uint16_t mk_initial_speed = MOUSEKEY_INITIAL_SPEED; static uint8_t move_unit(void) { - float speed = mk_initial_speed; + uint16_t speed = mk_initial_speed; if (mousekey_accel & ((1 << 0) | (1 << 2))) { speed = mousekey_accel & (1 << 2) ? mk_accelerated_speed : mk_decelerated_speed; } else if (mousekey_repeat && mouse_timer) { - const float time_elapsed = timer_elapsed(mouse_timer) / 50; - speed = mk_initial_speed + MOUSEKEY_MOVE_DELTA * time_elapsed + MOUSEKEY_MOVE_DELTA * 0.5 * time_elapsed * time_elapsed; + const uint16_t time_elapsed = timer_elapsed(mouse_timer) / 50; + speed = mk_initial_speed + MOUSEKEY_MOVE_DELTA * time_elapsed + MOUSEKEY_MOVE_DELTA * 0.5 * time_elapsed * time_elapsed; speed = speed > mk_base_speed ? mk_base_speed : speed; } /* convert speed to USB mouse speed 1 to 127 */ - speed = (uint8_t)(speed / (1000.0f / mk_interval)); + speed = (uint8_t)(speed / (1000U / mk_interval)); speed = speed < 1 ? 1 : speed; return speed > MOUSEKEY_MOVE_MAX ? MOUSEKEY_MOVE_MAX : speed; } static uint8_t wheel_unit(void) { - float speed = MOUSEKEY_WHEEL_INITIAL_MOVEMENTS; + uint16_t speed = MOUSEKEY_WHEEL_INITIAL_MOVEMENTS; if (mousekey_accel & ((1 << 0) | (1 << 2))) { speed = mousekey_accel & (1 << 2) ? MOUSEKEY_WHEEL_ACCELERATED_MOVEMENTS : MOUSEKEY_WHEEL_DECELERATED_MOVEMENTS; } else if (mousekey_wheel_repeat && mouse_timer) { if (mk_wheel_interval != MOUSEKEY_WHEEL_BASE_MOVEMENTS) { - const float time_elapsed = timer_elapsed(mouse_timer) / 50; - speed = MOUSEKEY_WHEEL_INITIAL_MOVEMENTS + 1 * time_elapsed + 1 * 0.5 * time_elapsed * time_elapsed; + const uint16_t time_elapsed = timer_elapsed(mouse_timer) / 50; + speed = MOUSEKEY_WHEEL_INITIAL_MOVEMENTS + 1 * time_elapsed + 1 * 0.5 * time_elapsed * time_elapsed; } speed = speed > MOUSEKEY_WHEEL_BASE_MOVEMENTS ? MOUSEKEY_WHEEL_BASE_MOVEMENTS : speed; } - mk_wheel_interval = 1000.0f / speed; + mk_wheel_interval = 1000U / speed; return (uint8_t)speed > MOUSEKEY_WHEEL_INITIAL_MOVEMENTS ? 2 : 1; } diff --git a/quantum/process_keycode/process_auto_shift.c b/quantum/process_keycode/process_auto_shift.c index 62c347ae0c..63e893fc18 100644 --- a/quantum/process_keycode/process_auto_shift.c +++ b/quantum/process_keycode/process_auto_shift.c @@ -75,7 +75,15 @@ __attribute__((weak)) bool get_auto_shifted_key(uint16_t keycode, keyrecord_t *r case AUTO_SHIFT_NUMERIC: # endif # ifndef NO_AUTO_SHIFT_SPECIAL - case AUTO_SHIFT_SPECIAL: +# ifndef NO_AUTO_SHIFT_TAB + case KC_TAB: +# endif +# ifndef NO_AUTO_SHIFT_SYMBOLS + case AUTO_SHIFT_SYMBOLS: +# endif +# endif +# ifdef AUTO_SHIFT_ENTER + case KC_ENT: # endif return true; } diff --git a/quantum/process_keycode/process_auto_shift.h b/quantum/process_keycode/process_auto_shift.h index 66a4b3138a..780177d2ff 100644 --- a/quantum/process_keycode/process_auto_shift.h +++ b/quantum/process_keycode/process_auto_shift.h @@ -28,10 +28,14 @@ // clang-format off #define AUTO_SHIFT_ALPHA KC_A ... KC_Z #define AUTO_SHIFT_NUMERIC KC_1 ... KC_0 +#define AUTO_SHIFT_SYMBOLS \ + KC_MINUS ... KC_SLASH: \ + case KC_NONUS_BACKSLASH + +// Kept to avoid breaking existing keymaps. #define AUTO_SHIFT_SPECIAL \ KC_TAB: \ - case KC_MINUS ... KC_SLASH: \ - case KC_NONUS_BACKSLASH + case AUTO_SHIFT_SYMBOLS // clang-format on bool process_auto_shift(uint16_t keycode, keyrecord_t *record); diff --git a/quantum/process_keycode/process_autocorrect.c b/quantum/process_keycode/process_autocorrect.c index 1376788266..7c9cb814e5 100644 --- a/quantum/process_keycode/process_autocorrect.c +++ b/quantum/process_keycode/process_autocorrect.c @@ -57,7 +57,7 @@ void autocorrect_toggle(void) { } /** - * @brief handler for determining if autocorrect should process keypress + * @brief handler for user to override whether autocorrect should process this keypress * * @param keycode Keycode registered by matrix press, per keymap * @param record keyrecord_t structure @@ -67,6 +67,23 @@ void autocorrect_toggle(void) { * @return false Stop processing and escape from autocorrect. */ __attribute__((weak)) bool process_autocorrect_user(uint16_t *keycode, keyrecord_t *record, uint8_t *typo_buffer_size, uint8_t *mods) { + return process_autocorrect_default_handler(keycode, record, typo_buffer_size, mods); +} + +/** + * @brief fallback handler for determining if autocorrect should process this keypress + * can be used by user callback to get the basic keycode being "wrapped" + * + * NOTE: These values may have been edited by user callback before getting here + * + * @param keycode Keycode registered by matrix press, per keymap + * @param record keyrecord_t structure + * @param typo_buffer_size passed along to allow resetting of autocorrect buffer + * @param mods allow processing of mod status + * @return true Allow autocorection + * @return false Stop processing and escape from autocorrect. + */ +bool process_autocorrect_default_handler(uint16_t *keycode, keyrecord_t *record, uint8_t *typo_buffer_size, uint8_t *mods) { // See quantum_keycodes.h for reference on these matched ranges. switch (*keycode) { // Exclude these keycodes from processing. diff --git a/quantum/process_keycode/process_autocorrect.h b/quantum/process_keycode/process_autocorrect.h index c7596107e5..00dacbf958 100644 --- a/quantum/process_keycode/process_autocorrect.h +++ b/quantum/process_keycode/process_autocorrect.h @@ -9,6 +9,7 @@ bool process_autocorrect(uint16_t keycode, keyrecord_t *record); bool process_autocorrect_user(uint16_t *keycode, keyrecord_t *record, uint8_t *typo_buffer_size, uint8_t *mods); +bool process_autocorrect_default_handler(uint16_t *keycode, keyrecord_t *record, uint8_t *typo_buffer_size, uint8_t *mods); bool apply_autocorrect(uint8_t backspaces, const char *str); bool autocorrect_is_enabled(void); diff --git a/quantum/process_keycode/process_dynamic_macro.c b/quantum/process_keycode/process_dynamic_macro.c index bf6af566e2..a022949d3d 100644 --- a/quantum/process_keycode/process_dynamic_macro.c +++ b/quantum/process_keycode/process_dynamic_macro.c @@ -151,6 +151,67 @@ void dynamic_macro_record_end(keyrecord_t *macro_buffer, keyrecord_t *macro_poin *macro_end = macro_pointer; } +/* Both macros use the same buffer but read/write on different + * ends of it. + * + * Macro1 is written left-to-right starting from the beginning of + * the buffer. + * + * Macro2 is written right-to-left starting from the end of the + * buffer. + * + * ¯o_buffer macro_end + * v v + * +------------------------------------------------------------+ + * |>>>>>> MACRO1 >>>>>> <<<<<<<<<<<<< MACRO2 <<<<<<<<<<<<<| + * +------------------------------------------------------------+ + * ^ ^ + * r_macro_end r_macro_buffer + * + * During the recording when one macro encounters the end of the + * other macro, the recording is stopped. Apart from this, there + * are no arbitrary limits for the macros' length in relation to + * each other: for example one can either have two medium sized + * macros or one long macro and one short macro. Or even one empty + * and one using the whole buffer. + */ +static keyrecord_t macro_buffer[DYNAMIC_MACRO_SIZE]; + +/* Pointer to the first buffer element after the first macro. + * Initially points to the very beginning of the buffer since the + * macro is empty. */ +static keyrecord_t *macro_end = macro_buffer; + +/* The other end of the macro buffer. Serves as the beginning of + * the second macro. */ +static keyrecord_t *const r_macro_buffer = macro_buffer + DYNAMIC_MACRO_SIZE - 1; + +/* Like macro_end but for the second macro. */ +static keyrecord_t *r_macro_end = r_macro_buffer; + +/* A persistent pointer to the current macro position (iterator) + * used during the recording. */ +static keyrecord_t *macro_pointer = NULL; + +/* 0 - no macro is being recorded right now + * 1,2 - either macro 1 or 2 is being recorded */ +static uint8_t macro_id = 0; + +/** + * If a dynamic macro is currently being recorded, stop recording. + */ +void dynamic_macro_stop_recording(void) { + switch (macro_id) { + case 1: + dynamic_macro_record_end(macro_buffer, macro_pointer, +1, ¯o_end); + break; + case 2: + dynamic_macro_record_end(r_macro_buffer, macro_pointer, -1, &r_macro_end); + break; + } + macro_id = 0; +} + /* Handle the key events related to the dynamic macros. Should be * called from process_record_user() like this: * @@ -162,52 +223,6 @@ void dynamic_macro_record_end(keyrecord_t *macro_buffer, keyrecord_t *macro_poin * } */ bool process_dynamic_macro(uint16_t keycode, keyrecord_t *record) { - /* Both macros use the same buffer but read/write on different - * ends of it. - * - * Macro1 is written left-to-right starting from the beginning of - * the buffer. - * - * Macro2 is written right-to-left starting from the end of the - * buffer. - * - * ¯o_buffer macro_end - * v v - * +------------------------------------------------------------+ - * |>>>>>> MACRO1 >>>>>> <<<<<<<<<<<<< MACRO2 <<<<<<<<<<<<<| - * +------------------------------------------------------------+ - * ^ ^ - * r_macro_end r_macro_buffer - * - * During the recording when one macro encounters the end of the - * other macro, the recording is stopped. Apart from this, there - * are no arbitrary limits for the macros' length in relation to - * each other: for example one can either have two medium sized - * macros or one long macro and one short macro. Or even one empty - * and one using the whole buffer. - */ - static keyrecord_t macro_buffer[DYNAMIC_MACRO_SIZE]; - - /* Pointer to the first buffer element after the first macro. - * Initially points to the very beginning of the buffer since the - * macro is empty. */ - static keyrecord_t *macro_end = macro_buffer; - - /* The other end of the macro buffer. Serves as the beginning of - * the second macro. */ - static keyrecord_t *const r_macro_buffer = macro_buffer + DYNAMIC_MACRO_SIZE - 1; - - /* Like macro_end but for the second macro. */ - static keyrecord_t *r_macro_end = r_macro_buffer; - - /* A persistent pointer to the current macro position (iterator) - * used during the recording. */ - static keyrecord_t *macro_pointer = NULL; - - /* 0 - no macro is being recorded right now - * 1,2 - either macro 1 or 2 is being recorded */ - static uint8_t macro_id = 0; - if (macro_id == 0) { /* No macro recording in progress. */ if (!record->event.pressed) { @@ -238,15 +253,7 @@ bool process_dynamic_macro(uint16_t keycode, keyrecord_t *record) { if (record->event.pressed ^ (keycode != QK_DYNAMIC_MACRO_RECORD_STOP)) { /* Ignore the initial release * just after the recording * starts for DM_RSTP. */ - switch (macro_id) { - case 1: - dynamic_macro_record_end(macro_buffer, macro_pointer, +1, ¯o_end); - break; - case 2: - dynamic_macro_record_end(r_macro_buffer, macro_pointer, -1, &r_macro_end); - break; - } - macro_id = 0; + dynamic_macro_stop_recording(); } return false; #ifdef DYNAMIC_MACRO_NO_NESTING diff --git a/quantum/process_keycode/process_dynamic_macro.h b/quantum/process_keycode/process_dynamic_macro.h index ab70726897..9841254af4 100644 --- a/quantum/process_keycode/process_dynamic_macro.h +++ b/quantum/process_keycode/process_dynamic_macro.h @@ -39,3 +39,4 @@ void dynamic_macro_record_start_user(int8_t direction); void dynamic_macro_play_user(int8_t direction); void dynamic_macro_record_key_user(int8_t direction, keyrecord_t *record); void dynamic_macro_record_end_user(int8_t direction); +void dynamic_macro_stop_recording(void); diff --git a/quantum/quantum.c b/quantum/quantum.c index 091cf298f7..fe3e85720d 100644 --- a/quantum/quantum.c +++ b/quantum/quantum.c @@ -468,7 +468,7 @@ void suspend_power_down_quantum(void) { #ifndef NO_SUSPEND_POWER_DOWN // Turn off backlight # ifdef BACKLIGHT_ENABLE - backlight_set(0); + backlight_level_noeeprom(0); # endif # ifdef LED_MATRIX_ENABLE diff --git a/quantum/quantum_keycodes.h b/quantum/quantum_keycodes.h index f931b7e4c7..d3249bd455 100644 --- a/quantum/quantum_keycodes.h +++ b/quantum/quantum_keycodes.h @@ -179,10 +179,10 @@ #define QK_UNICODE_GET_CODE_POINT(kc) ((kc)&0x7FFF) // UNICODEMAP_ENABLE - Allows Unicode input up to 0x10FFFF, requires unicode_map -#define X(i) (QK_UNICODEMAP | ((i)&0x3FFF)) +#define UM(i) (QK_UNICODEMAP | ((i)&0x3FFF)) #define QK_UNICODEMAP_GET_INDEX(kc) ((kc)&0x3FFF) -#define XP(i, j) (QK_UNICODEMAP_PAIR | ((i)&0x7F) | (((j)&0x7F) << 7)) // 127 max i and j +#define UP(i, j) (QK_UNICODEMAP_PAIR | ((i)&0x7F) | (((j)&0x7F) << 7)) // 127 max i and j #define QK_UNICODEMAP_PAIR_GET_UNSHIFTED_INDEX(kc) ((kc)&0x7F) #define QK_UNICODEMAP_PAIR_GET_SHIFTED_INDEX(kc) (((kc) >> 7) & 0x7F) diff --git a/quantum/quantum_keycodes_legacy.h b/quantum/quantum_keycodes_legacy.h index 120c98bc62..ad078cdad5 100644 --- a/quantum/quantum_keycodes_legacy.h +++ b/quantum/quantum_keycodes_legacy.h @@ -53,3 +53,6 @@ #define GUI_ON QK_MAGIC_GUI_ON #define GUI_OFF QK_MAGIC_GUI_OFF #define GUI_TOG QK_MAGIC_TOGGLE_GUI + +#define X(i) UM(i) +#define XP(i, j) UM(i, j) diff --git a/quantum/rgb_matrix/animations/pixel_rain_anim.h b/quantum/rgb_matrix/animations/pixel_rain_anim.h index 9d63f451e2..26cd73b578 100644 --- a/quantum/rgb_matrix/animations/pixel_rain_anim.h +++ b/quantum/rgb_matrix/animations/pixel_rain_anim.h @@ -16,13 +16,9 @@ static bool PIXEL_RAIN(effect_params_t* params) { if (!HAS_ANY_FLAGS(g_led_config.flags[led_index], params->flags)) { return; } - if (random8() & 2) { - rgb_matrix_set_color(led_index, 0, 0, 0); - } else { - HSV hsv = {random8(), random8_min_max(127, 255), rgb_matrix_config.hsv.v}; - RGB rgb = rgb_matrix_hsv_to_rgb(hsv); - rgb_matrix_set_color(led_index, rgb.r, rgb.g, rgb.b); - } + HSV hsv = (random8() & 2) ? (HSV){0, 0, 0} : (HSV){random8(), random8_min_max(127, 255), rgb_matrix_config.hsv.v}; + RGB rgb = rgb_matrix_hsv_to_rgb(hsv); + rgb_matrix_set_color(led_index, rgb.r, rgb.g, rgb.b); wait_timer = g_rgb_timer + interval(); } diff --git a/quantum/rgb_matrix/rgb_matrix.c b/quantum/rgb_matrix/rgb_matrix.c index 1f3912cf7e..1680389793 100644 --- a/quantum/rgb_matrix/rgb_matrix.c +++ b/quantum/rgb_matrix/rgb_matrix.c @@ -428,7 +428,10 @@ void rgb_matrix_task(void) { case RENDERING: rgb_task_render(effect); if (effect) { - rgb_matrix_indicators(); + // Only run the basic indicators in the last render iteration (default there are 5 iterations) + if (rgb_effect_params.iter == RGB_MATRIX_LED_PROCESS_MAX_ITERATIONS) { + rgb_matrix_indicators(); + } rgb_matrix_indicators_advanced(&rgb_effect_params); } break; diff --git a/quantum/rgb_matrix/rgb_matrix.h b/quantum/rgb_matrix/rgb_matrix.h index 9ea248b66d..83851d8995 100644 --- a/quantum/rgb_matrix/rgb_matrix.h +++ b/quantum/rgb_matrix/rgb_matrix.h @@ -49,8 +49,9 @@ #endif #ifndef RGB_MATRIX_LED_PROCESS_LIMIT -# define RGB_MATRIX_LED_PROCESS_LIMIT (RGB_MATRIX_LED_COUNT + 4) / 5 +# define RGB_MATRIX_LED_PROCESS_LIMIT ((RGB_MATRIX_LED_COUNT + 4) / 5) #endif +#define RGB_MATRIX_LED_PROCESS_MAX_ITERATIONS ((RGB_MATRIX_LED_COUNT + RGB_MATRIX_LED_PROCESS_LIMIT - 1) / RGB_MATRIX_LED_PROCESS_LIMIT) #if defined(RGB_MATRIX_LED_PROCESS_LIMIT) && RGB_MATRIX_LED_PROCESS_LIMIT > 0 && RGB_MATRIX_LED_PROCESS_LIMIT < RGB_MATRIX_LED_COUNT # if defined(RGB_MATRIX_SPLIT) diff --git a/quantum/rgb_matrix/rgb_matrix_drivers.c b/quantum/rgb_matrix/rgb_matrix_drivers.c index d66fc801dd..6de20ac8a5 100644 --- a/quantum/rgb_matrix/rgb_matrix_drivers.c +++ b/quantum/rgb_matrix/rgb_matrix_drivers.c @@ -426,11 +426,17 @@ const rgb_matrix_driver_t rgb_matrix_driver = { // LED color buffer LED_TYPE rgb_matrix_ws2812_array[RGB_MATRIX_LED_COUNT]; +bool ws2812_dirty = false; -static void init(void) {} +static void init(void) { + ws2812_dirty = false; +} static void flush(void) { - ws2812_setleds(rgb_matrix_ws2812_array, RGB_MATRIX_LED_COUNT); + if (ws2812_dirty) { + ws2812_setleds(rgb_matrix_ws2812_array, RGB_MATRIX_LED_COUNT); + ws2812_dirty = false; + } } // Set an led in the buffer to a color @@ -448,6 +454,11 @@ static inline void setled(int i, uint8_t r, uint8_t g, uint8_t b) { } # endif + if (rgb_matrix_ws2812_array[i].r == r && rgb_matrix_ws2812_array[i].g == g && rgb_matrix_ws2812_array[i].b == b) { + return; + } + + ws2812_dirty = true; rgb_matrix_ws2812_array[i].r = r; rgb_matrix_ws2812_array[i].g = g; rgb_matrix_ws2812_array[i].b = b; diff --git a/quantum/split_common/transactions.c b/quantum/split_common/transactions.c index b3c80f1194..8cd018a6ec 100644 --- a/quantum/split_common/transactions.c +++ b/quantum/split_common/transactions.c @@ -412,7 +412,7 @@ static void backlight_handlers_slave(matrix_row_t master_matrix[], matrix_row_t uint8_t backlight_level = split_shmem->backlight_level; split_shared_memory_unlock(); - backlight_set(backlight_level); + backlight_level_noeeprom(backlight_level); } # define TRANSACTIONS_BACKLIGHT_MASTER() TRANSACTION_HANDLER_MASTER(backlight) @@ -1,3 +1,7 @@ +# THIS IS THE DEVELOP BRANCH + +Warning- This is the `develop` branch of QMK Firmware. You may encounter broken code here. Please see [Breaking Changes](https://docs.qmk.fm/#/breaking_changes) for more information. + # Quantum Mechanical Keyboard Firmware [](https://github.com/qmk/qmk_firmware/tags) diff --git a/tests/caps_word/caps_word_unicodemap/test_caps_word_unicodemap.cpp b/tests/caps_word/caps_word_unicodemap/test_caps_word_unicodemap.cpp index 01cdfd6408..21e5493526 100644 --- a/tests/caps_word/caps_word_unicodemap/test_caps_word_unicodemap.cpp +++ b/tests/caps_word/caps_word_unicodemap/test_caps_word_unicodemap.cpp @@ -39,8 +39,8 @@ const uint32_t unicode_map[] PROGMEM = { [DELTA_UPPERCASE] = 0x0394, }; -#define U_DASH XP(ENDASH, EMDASH) -#define U_DELTA XP(DELTA_LOWERCASE, DELTA_UPPERCASE) +#define U_DASH UP(ENDASH, EMDASH) +#define U_DELTA UP(DELTA_LOWERCASE, DELTA_UPPERCASE) bool caps_word_press_user(uint16_t keycode) { switch (keycode) { diff --git a/tmk_core/protocol.mk b/tmk_core/protocol.mk index d3f15c4588..2ae7aa9abe 100644 --- a/tmk_core/protocol.mk +++ b/tmk_core/protocol.mk @@ -99,7 +99,7 @@ ifeq ($(strip $(SHARED_EP_ENABLE)), yes) endif ifeq ($(strip $(USB_HID_ENABLE)), yes) - include $(TMK_DIR)/protocol/usb_hid.mk + include $(TMK_DIR)/protocol/usb_hid/usb_hid.mk endif # Search Path diff --git a/tmk_core/protocol/arm_atsam.mk b/tmk_core/protocol/arm_atsam/arm_atsam.mk index ffd1fa9f50..ffd1fa9f50 100644 --- a/tmk_core/protocol/arm_atsam.mk +++ b/tmk_core/protocol/arm_atsam/arm_atsam.mk diff --git a/tmk_core/protocol/arm_atsam/main_arm_atsam.c b/tmk_core/protocol/arm_atsam/main_arm_atsam.c index 1ccfbfb54a..5bed9e0cf4 100644 --- a/tmk_core/protocol/arm_atsam/main_arm_atsam.c +++ b/tmk_core/protocol/arm_atsam/main_arm_atsam.c @@ -23,7 +23,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #include "host_driver.h" #include "keycode_config.h" #include <string.h> -#include "quantum.h" // From protocol directory #include "arm_atsam_protocol.h" diff --git a/tmk_core/protocol/arm_atsam/md_rgb_matrix.c b/tmk_core/protocol/arm_atsam/md_rgb_matrix.c index 52fe86d297..6069d1e609 100644 --- a/tmk_core/protocol/arm_atsam/md_rgb_matrix.c +++ b/tmk_core/protocol/arm_atsam/md_rgb_matrix.c @@ -23,6 +23,7 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. # include "arm_atsam_protocol.h" # include "led.h" # include "rgb_matrix.h" +# include "eeprom.h" # include <string.h> # include <math.h> @@ -347,24 +348,24 @@ static void flush(void) { } void md_rgb_matrix_indicators_advanced(uint8_t led_min, uint8_t led_max) { - uint8_t kbled = keyboard_leds(); - if (kbled && rgb_matrix_config.enable) { + led_t led_state = host_keyboard_led_state(); + if (led_state.raw && rgb_matrix_config.enable) { for (uint8_t i = led_min; i < led_max; i++) { if ( # if USB_LED_NUM_LOCK_SCANCODE != 255 - (led_map[i].scan == USB_LED_NUM_LOCK_SCANCODE && (kbled & (1 << USB_LED_NUM_LOCK))) || + (led_map[i].scan == USB_LED_NUM_LOCK_SCANCODE && led_state.num_lock) || # endif // NUM LOCK # if USB_LED_CAPS_LOCK_SCANCODE != 255 - (led_map[i].scan == USB_LED_CAPS_LOCK_SCANCODE && (kbled & (1 << USB_LED_CAPS_LOCK))) || + (led_map[i].scan == USB_LED_CAPS_LOCK_SCANCODE && led_state.caps_lock) || # endif // CAPS LOCK # if USB_LED_SCROLL_LOCK_SCANCODE != 255 - (led_map[i].scan == USB_LED_SCROLL_LOCK_SCANCODE && (kbled & (1 << USB_LED_SCROLL_LOCK))) || + (led_map[i].scan == USB_LED_SCROLL_LOCK_SCANCODE && led_state.scroll_lock) || # endif // SCROLL LOCK # if USB_LED_COMPOSE_SCANCODE != 255 - (led_map[i].scan == USB_LED_COMPOSE_SCANCODE && (kbled & (1 << USB_LED_COMPOSE))) || + (led_map[i].scan == USB_LED_COMPOSE_SCANCODE && led_state.compose) || # endif // COMPOSE # if USB_LED_KANA_SCANCODE != 255 - (led_map[i].scan == USB_LED_KANA_SCANCODE && (kbled & (1 << USB_LED_KANA))) || + (led_map[i].scan == USB_LED_KANA_SCANCODE && led_state.kana) || # endif // KANA (0)) { if (rgb_matrix_get_flags() & LED_FLAG_INDICATOR) { diff --git a/tmk_core/protocol/arm_atsam/md_rgb_matrix.h b/tmk_core/protocol/arm_atsam/md_rgb_matrix.h index f27da028a0..bb3312e8e7 100644 --- a/tmk_core/protocol/arm_atsam/md_rgb_matrix.h +++ b/tmk_core/protocol/arm_atsam/md_rgb_matrix.h @@ -15,11 +15,9 @@ You should have received a copy of the GNU General Public License along with this program. If not, see <http://www.gnu.org/licenses/>. */ -#ifndef _LED_MATRIX_H_ -#define _LED_MATRIX_H_ +#pragma once -#include "quantum.h" -#include "eeprom.h" +#include <stdint.h> // From keyboard #include "config_led.h" @@ -200,5 +198,3 @@ void md_led_changed(void); #else extern uint8_t gcr_desired; #endif // USE_MASSDROP_CONFIGURATOR - -#endif //_LED_MATRIX_H_ diff --git a/tmk_core/protocol/arm_atsam/md_rgb_matrix_programs.c b/tmk_core/protocol/arm_atsam/md_rgb_matrix_programs.c index 58fc4efd9c..476b605297 100644 --- a/tmk_core/protocol/arm_atsam/md_rgb_matrix_programs.c +++ b/tmk_core/protocol/arm_atsam/md_rgb_matrix_programs.c @@ -19,6 +19,7 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. # ifdef USE_MASSDROP_CONFIGURATOR # include "md_rgb_matrix.h" +# include "util.h" // Teal <-> Salmon led_setup_t leds_teal_salmon[] = { diff --git a/tmk_core/protocol/chibios/chibios.c b/tmk_core/protocol/chibios/chibios.c index 10a976608a..1eebdaf6c3 100644 --- a/tmk_core/protocol/chibios/chibios.c +++ b/tmk_core/protocol/chibios/chibios.c @@ -49,6 +49,8 @@ #include "suspend.h" #include "wait.h" +#define USB_GETSTATUS_REMOTE_WAKEUP_ENABLED (2U) + /* ------------------------- * TMK host driver defs * ------------------------- @@ -178,28 +180,24 @@ void protocol_post_init(void) { } void protocol_pre_task(void) { - usb_event_queue_task(); - #if !defined(NO_USB_STARTUP_CHECK) if (USB_DRIVER.state == USB_SUSPENDED) { - print("[s]"); + dprintln("suspending keyboard"); while (USB_DRIVER.state == USB_SUSPENDED) { - /* Do this in the suspended state */ - suspend_power_down(); // on AVR this deep sleeps for 15ms - /* Remote wakeup */ - if (suspend_wakeup_condition()) { + suspend_power_down(); + if ((USB_DRIVER.status & USB_GETSTATUS_REMOTE_WAKEUP_ENABLED) && suspend_wakeup_condition()) { + /* issue a remote wakeup event to the host which should resume + * the bus and get our keyboard out of suspension. */ usbWakeupHost(&USB_DRIVER); - restart_usb_driver(&USB_DRIVER); } } - /* Woken up */ - // variables has been already cleared by the wakeup hook - send_keyboard_report(); -# ifdef MOUSEKEY_ENABLE - mousekey_send(); -# endif /* MOUSEKEY_ENABLE */ + /* after a successful wakeup a USB_EVENT_WAKEUP is signaled to QMK by + * ChibiOS, which triggers a wakeup callback that restores the state of + * the keyboard. Therefore we do nothing here. */ } #endif + + usb_event_queue_task(); } void protocol_post_task(void) { diff --git a/tmk_core/protocol/chibios.mk b/tmk_core/protocol/chibios/chibios.mk index 8eaf5b10d2..8eaf5b10d2 100644 --- a/tmk_core/protocol/chibios.mk +++ b/tmk_core/protocol/chibios/chibios.mk diff --git a/tmk_core/protocol/lufa/lufa.c b/tmk_core/protocol/lufa/lufa.c index 20bfc8fb3c..f04ca79a0c 100644 --- a/tmk_core/protocol/lufa/lufa.c +++ b/tmk_core/protocol/lufa/lufa.c @@ -48,10 +48,10 @@ # include "sleep_led.h" #endif #include "suspend.h" +#include "wait.h" #include "usb_descriptor.h" #include "lufa.h" -#include "quantum.h" #include "usb_device_state.h" #include <util/atomic.h> @@ -858,7 +858,7 @@ void protocol_post_init(void) { void protocol_pre_task(void) { #if !defined(NO_USB_STARTUP_CHECK) if (USB_DeviceState == DEVICE_STATE_Suspended) { - print("[s]"); + dprintln("suspending keyboard"); while (USB_DeviceState == DEVICE_STATE_Suspended) { suspend_power_down(); if (USB_Device_RemoteWakeupEnabled && suspend_wakeup_condition()) { diff --git a/tmk_core/protocol/lufa.mk b/tmk_core/protocol/lufa/lufa.mk index b048c1836c..b048c1836c 100644 --- a/tmk_core/protocol/lufa.mk +++ b/tmk_core/protocol/lufa/lufa.mk diff --git a/tmk_core/protocol/usb_hid.mk b/tmk_core/protocol/usb_hid/usb_hid.mk index c0c157c043..c0c157c043 100644 --- a/tmk_core/protocol/usb_hid.mk +++ b/tmk_core/protocol/usb_hid/usb_hid.mk diff --git a/tmk_core/protocol/usb_util.c b/tmk_core/protocol/usb_util.c index 49aadedc2a..3b3be4a767 100644 --- a/tmk_core/protocol/usb_util.c +++ b/tmk_core/protocol/usb_util.c @@ -13,13 +13,17 @@ * You should have received a copy of the GNU General Public License * along with this program. If not, see <http://www.gnu.org/licenses/>. */ -#include "quantum.h" + #include "usb_util.h" +#include "gpio.h" +#include "wait.h" __attribute__((weak)) void usb_disconnect(void) {} + __attribute__((weak)) bool usb_connected_state(void) { return true; } + __attribute__((weak)) bool usb_vbus_state(void) { #ifdef USB_VBUS_PIN setPinInput(USB_VBUS_PIN); diff --git a/tmk_core/protocol/usb_util.h b/tmk_core/protocol/usb_util.h index 13db9fbfbd..6f0e406378 100644 --- a/tmk_core/protocol/usb_util.h +++ b/tmk_core/protocol/usb_util.h @@ -13,10 +13,13 @@ * You should have received a copy of the GNU General Public License * along with this program. If not, see <http://www.gnu.org/licenses/>. */ + #pragma once #include <stdbool.h> void usb_disconnect(void); + bool usb_connected_state(void); + bool usb_vbus_state(void); diff --git a/tmk_core/protocol/vusb.mk b/tmk_core/protocol/vusb/vusb.mk index 5572597e21..5572597e21 100644 --- a/tmk_core/protocol/vusb.mk +++ b/tmk_core/protocol/vusb/vusb.mk diff --git a/users/curry/oled.c b/users/curry/oled.c index 89112af121..2defcbd80e 100644 --- a/users/curry/oled.c +++ b/users/curry/oled.c @@ -86,12 +86,12 @@ void render_layer_state(void) { oled_write_P(PSTR(" Mods"), layer_state_is(_MODS)); } -void render_keylock_status(uint8_t led_usb_state) { +void render_keylock_status(led_t led_state) { oled_write_P(PSTR("Lock:"), false); oled_write_P(PSTR(" "), false); - oled_write_P(PSTR("N"), led_usb_state & (1 << USB_LED_NUM_LOCK)); - oled_write_P(PSTR("C"), led_usb_state & (1 << USB_LED_CAPS_LOCK)); - oled_write_ln_P(PSTR("S"), led_usb_state & (1 << USB_LED_SCROLL_LOCK)); + oled_write_P(PSTR("N"), led_state.num_lock); + oled_write_P(PSTR("C"), led_state.caps_lock); + oled_write_ln_P(PSTR("S"), led_state.scroll_lock); } void render_mod_status(uint8_t modifiers) { @@ -129,7 +129,7 @@ void render_user_status(void) { void render_status_main(void) { /* Show Keyboard Layout */ render_default_layer_state(); - render_keylock_status(host_keyboard_leds()); + render_keylock_status(host_keyboard_led_state()); render_bootmagic_status(); render_user_status(); diff --git a/users/curry/rgb_lighting_user.c b/users/curry/rgb_lighting_user.c index b8d519feca..34156744fe 100644 --- a/users/curry/rgb_lighting_user.c +++ b/users/curry/rgb_lighting_user.c @@ -11,9 +11,9 @@ void rgblight_sethsv_default_helper(uint8_t index) { rgblight_sethsv_at(rgblight * This is especially useful for One Shot Mods, since it's not always obvious if they're still lit up. */ #if defined(INDICATOR_LIGHTS) -void set_rgb_indicators(uint8_t this_mod, uint8_t this_led, uint8_t this_osm) { +void set_rgb_indicators(uint8_t this_mod, led_t this_led, uint8_t this_osm) { if (userspace_config.rgb_layer_change && get_highest_layer(layer_state) == 0) { - if ((this_mod | this_osm) & MOD_MASK_SHIFT || this_led & (1 << USB_LED_CAPS_LOCK)) { + if ((this_mod | this_osm) & MOD_MASK_SHIFT || this_led.caps_lock) { # ifdef SHFT_LED1 rgblight_sethsv_at(120, 255, 255, SHFT_LED1); # endif // SHFT_LED1 @@ -79,7 +79,7 @@ void set_rgb_indicators(uint8_t this_mod, uint8_t this_led, uint8_t this_osm) { /* Function for the indicators */ void matrix_scan_indicator(void) { if (has_initialized) { - set_rgb_indicators(get_mods(), host_keyboard_leds(), get_oneshot_mods()); + set_rgb_indicators(get_mods(), host_keyboard_led_state(), get_oneshot_mods()); } } #endif // INDICATOR_LIGHTS diff --git a/users/doogle999/doogle999.c b/users/doogle999/doogle999.c index 5d71599687..a5bd637ece 100644 --- a/users/doogle999/doogle999.c +++ b/users/doogle999/doogle999.c @@ -389,7 +389,7 @@ bool process_record_user(uint16_t keycode, keyrecord_t* record) /* KC_KP_1, KC_KP_2, ..., KC_KP_0, KC_KP_DOT */ (keycode >= KC_KP_1 && keycode <= KC_KP_DOT); - if(numpadKeyPressed && !(host_keyboard_leds() & (1 << USB_LED_NUM_LOCK))) + if(numpadKeyPressed && !host_keyboard_led_state().num_lock) { add_key(KC_NUM_LOCK); send_keyboard_report(); diff --git a/users/ericgebhart/oled/oled_stuff.c b/users/ericgebhart/oled/oled_stuff.c index f2c4f0f394..211fe4ab3e 100755 --- a/users/ericgebhart/oled/oled_stuff.c +++ b/users/ericgebhart/oled/oled_stuff.c @@ -32,11 +32,11 @@ void oled_render_locale(void) { } } -void oled_render_keylock_status(uint8_t led_usb_state) { +void oled_render_keylock_status(led_t led_state) { oled_write_P(PSTR(" Lock:"), false); - oled_write_P(PSTR("N"), led_usb_state & (1 << USB_LED_NUM_LOCK)); - oled_write_P(PSTR("C"), led_usb_state & (1 << USB_LED_CAPS_LOCK)); - oled_write_P(PSTR("S"), led_usb_state & (1 << USB_LED_SCROLL_LOCK)); + oled_write_P(PSTR("N"), led_state.num_lock); + oled_write_P(PSTR("C"), led_state.caps_lock); + oled_write_P(PSTR("S"), led_state.scroll_lock); } void oled_render_mod_status(uint8_t modifiers) { @@ -49,7 +49,7 @@ void oled_render_mod_status(uint8_t modifiers) { void oled_render_mod_lock_status(void){ oled_render_mod_status(get_mods() | get_oneshot_mods()); - oled_render_keylock_status(host_keyboard_leds()); + oled_render_keylock_status(host_keyboard_led_state()); } @@ -187,6 +187,3 @@ bool oled_task_user(void) { } #endif - -/* oled_render_keylock_status(host_keyboard_leds()); */ -/* oled_render_mod_status(get_mods() | get_oneshot_mods()); */ diff --git a/users/konstantin/unicode.h b/users/konstantin/unicode.h index 82caea7c9a..472f48a942 100644 --- a/users/konstantin/unicode.h +++ b/users/konstantin/unicode.h @@ -31,7 +31,7 @@ #define UCM_NAME(name, code) UCM_ ## name, #define UCM_ENTRY(name, code) [UCM_ ## name] = code, -#define UCM_KEYCODE(name, code) name = X(UCM_ ## name), +#define UCM_KEYCODE(name, code) name = UM(UCM_ ## name), #if defined(UNICODE_ENABLE) enum unicode_keycodes { diff --git a/users/kuchosauronad0/unicode.h b/users/kuchosauronad0/unicode.h index 9ff523baad..340b4cf94b 100644 --- a/users/kuchosauronad0/unicode.h +++ b/users/kuchosauronad0/unicode.h @@ -2,7 +2,6 @@ #include "quantum.h" -/* use X(n) to call the */ #ifdef UNICODEMAP_ENABLE enum unicode_name { OKOK, // diff --git a/users/kuchosauronad0/wrappers.h b/users/kuchosauronad0/wrappers.h index 543586e009..a17e4178ff 100644 --- a/users/kuchosauronad0/wrappers.h +++ b/users/kuchosauronad0/wrappers.h @@ -152,13 +152,13 @@ NOTE: These are all the same length. If you do a search/replace #endif #ifdef UNICODEMAP_ENABLE -# define _______________UNICODE_L1__________________ X(SMRK), X(THINK), X(CLOWN), X(HUNDR), X(BANG) -# define _______________UNICODE_L2__________________ X(GRIN), X(MONKEY), X(OKOK), X(EGGPL), X(LIT) -# define _______________UNICODE_L3__________________ X(WEARY), X(UNAMU), X(EFFU), X(MONOCL), X(IRONY) +# define _______________UNICODE_L1__________________ UM(SMRK), UM(THINK), UM(CLOWN), UM(HUNDR), UM(BANG) +# define _______________UNICODE_L2__________________ UM(GRIN), UM(MONKEY), UM(OKOK), UM(EGGPL), UM(LIT) +# define _______________UNICODE_L3__________________ UM(WEARY), UM(UNAMU), UM(EFFU), UM(MONOCL), UM(IRONY) -# define _______________UNICODE_R1__________________ X(DRUG0), X(THUP), X(INUP), X(DIZZY), X(COOL) -# define _______________UNICODE_R2__________________ X(FIST0), X(FIST2), X(FIST3), X(FIST1), X(OKOK) -# define _______________UNICODE_R3__________________ X(MNDBLWN), X(THDN), X(SPOCK), X(HOLE), X(DASH) +# define _______________UNICODE_R1__________________ UM(DRUG0), UM(THUP), UM(INUP), UM(DIZZY), UM(COOL) +# define _______________UNICODE_R2__________________ UM(FIST0), UM(FIST2), UM(FIST3), UM(FIST1), UM(OKOK) +# define _______________UNICODE_R3__________________ UM(MNDBLWN), UM(THDN), UM(SPOCK), UM(HOLE), UM(DASH) #endif #define ________________NUMBER_LEFT________________ KC_1, KC_2, KC_3, KC_4, KC_5 diff --git a/users/ridingqwerty/unicode.h b/users/ridingqwerty/unicode.h index de8d1593b4..08b6f4fb8d 100644 --- a/users/ridingqwerty/unicode.h +++ b/users/ridingqwerty/unicode.h @@ -216,7 +216,7 @@ #define UCM_NAME(name, code) UCM_ ## name, // UCM_LALP, #define UCM_ENTRY(name, code) [UCM_ ## name] = code, // [UCM_LALP] = 0x03B1, -#define UCM_KEYCODE(name, code) name = X(UCM_ ## name), // LALP = X(UCM_LALP) +#define UCM_KEYCODE(name, code) name = UM(UCM_ ## name), // LALP = UM(UCM_LALP) #if defined(UNICODE_ENABLE) enum unicode_keycodes { @@ -235,61 +235,61 @@ enum unicode_keycodes { #endif -#define ALPHA XP(LALP, UALP) -#define BETA XP(LBET, UBET) -#define GAMMA XP(LGAM, UGAM) -#define DELTA XP(LDEL, UDEL) -#define EPSLN XP(LEPS, UEPS) -#define ZETA XP(LZET, UZET) -#define ETA XP(LETA, UETA) -#define THETA XP(LTHE, UTHE) -#define IOTA XP(LIOT, UIOT) -#define KAPPA XP(LKAP, UKAP) -#define LAMBD XP(LLAM, ULAM) -#define GMU XP(LMU, UMU) -#define NU XP(LNU, UNU) -#define XI XP(LXI, UXI) -#define OMCRN XP(LOMI, UOMI) -#define PI XP(LPI, UPI) -#define RHO XP(LRHO, URHO) -#define SIGMA XP(LSIG, USIG) -#define TAU XP(LTAU, UTAU) -#define UPSLN XP(LUPS, UUPS) -#define PHI XP(LPHI, UPHI) -#define CHI XP(LCHI, UCHI) -#define PSI XP(LPSI, UPSI) -#define OMEGA XP(LOME, UOME) +#define ALPHA UP(LALP, UALP) +#define BETA UP(LBET, UBET) +#define GAMMA UP(LGAM, UGAM) +#define DELTA UP(LDEL, UDEL) +#define EPSLN UP(LEPS, UEPS) +#define ZETA UP(LZET, UZET) +#define ETA UP(LETA, UETA) +#define THETA UP(LTHE, UTHE) +#define IOTA UP(LIOT, UIOT) +#define KAPPA UP(LKAP, UKAP) +#define LAMBD UP(LLAM, ULAM) +#define GMU UP(LMU, UMU) +#define NU UP(LNU, UNU) +#define XI UP(LXI, UXI) +#define OMCRN UP(LOMI, UOMI) +#define PI UP(LPI, UPI) +#define RHO UP(LRHO, URHO) +#define SIGMA UP(LSIG, USIG) +#define TAU UP(LTAU, UTAU) +#define UPSLN UP(LUPS, UUPS) +#define PHI UP(LPHI, UPHI) +#define CHI UP(LCHI, UCHI) +#define PSI UP(LPSI, UPSI) +#define OMEGA UP(LOME, UOME) -#define AH XP(LAH, UAH) -#define BE XP(LBE, UBE) -#define VE XP(LVE, UVE) -#define GHE XP(LGHE, UGHE) -#define DE XP(LDE, UDE) -#define IE XP(LIE, UIE) -#define IO XP(LIO, UIO) -#define ZHE XP(LZHE, UZHE) -#define ZE XP(LZE, UZE) -#define IH XP(LIH, UIH) -#define SIH XP(LSIH, USIH) -#define KA XP(LKA, UKA) -#define EL XP(LEL, UEL) -#define EM XP(LEM, UEM) -#define EN XP(LEN, UEN) -#define OH XP(LOH, UOH) -#define PE XP(LPE, UPE) -#define ER XP(LER, UER) -#define ES XP(LES, UES) -#define TE XP(LTE, UTE) -#define UU XP(LUU, UUU) -#define EF XP(LEF, UEF) -#define HA XP(LHA, UHA) -#define TSE XP(LTSE, UTSE) -#define CHE XP(LCHE, UCHE) -#define SHA XP(LSHA, USHA) -#define SCHA XP(LSCHA, USCHA) -#define HARD XP(LHARD, UHARD) -#define YERU XP(LYERU, UYERU) -#define SOFT XP(LSOFT, USOFT) -#define EH XP(LEH, UEH) -#define YU XP(LYU, UYU) -#define YA XP(LYA, UYA) +#define AH UP(LAH, UAH) +#define BE UP(LBE, UBE) +#define VE UP(LVE, UVE) +#define GHE UP(LGHE, UGHE) +#define DE UP(LDE, UDE) +#define IE UP(LIE, UIE) +#define IO UP(LIO, UIO) +#define ZHE UP(LZHE, UZHE) +#define ZE UP(LZE, UZE) +#define IH UP(LIH, UIH) +#define SIH UP(LSIH, USIH) +#define KA UP(LKA, UKA) +#define EL UP(LEL, UEL) +#define EM UP(LEM, UEM) +#define EN UP(LEN, UEN) +#define OH UP(LOH, UOH) +#define PE UP(LPE, UPE) +#define ER UP(LER, UER) +#define ES UP(LES, UES) +#define TE UP(LTE, UTE) +#define UU UP(LUU, UUU) +#define EF UP(LEF, UEF) +#define HA UP(LHA, UHA) +#define TSE UP(LTSE, UTSE) +#define CHE UP(LCHE, UCHE) +#define SHA UP(LSHA, USHA) +#define SCHA UP(LSCHA, USCHA) +#define HARD UP(LHARD, UHARD) +#define YERU UP(LYERU, UYERU) +#define SOFT UP(LSOFT, USOFT) +#define EH UP(LEH, UEH) +#define YU UP(LYU, UYU) +#define YA UP(LYA, UYA) diff --git a/users/rmeli/keyrecords/unicode.h b/users/rmeli/keyrecords/unicode.h index c3ba96d5b6..63c355415e 100644 --- a/users/rmeli/keyrecords/unicode.h +++ b/users/rmeli/keyrecords/unicode.h @@ -74,13 +74,13 @@ const uint32_t unicode_map[] PROGMEM = { }; // Accents -#define A_GRV XP(aGRV, AGRV) -#define A_UML XP(aUML, AUML) -#define E_GRV XP(eGRV, EGRV) -#define E_ACT XP(eACT, EACT) -#define I_GRV XP(iGRV, IGRV) -#define I_CIR XP(iCIR, ICIR) -#define O_GRV XP(oGRV, OGRV) -#define O_UML XP(oUML, OUML) -#define U_GRV XP(uGRV, UGRV) -#define U_UML XP(uUML, UUML) +#define A_GRV UP(aGRV, AGRV) +#define A_UML UP(aUML, AUML) +#define E_GRV UP(eGRV, EGRV) +#define E_ACT UP(eACT, EACT) +#define I_GRV UP(iGRV, IGRV) +#define I_CIR UP(iCIR, ICIR) +#define O_GRV UP(oGRV, OGRV) +#define O_UML UP(oUML, OUML) +#define U_GRV UP(uGRV, UGRV) +#define U_UML UP(uUML, UUML) diff --git a/users/rupa/wrappers.h b/users/rupa/wrappers.h index dfc00b5120..df32ef39ab 100644 --- a/users/rupa/wrappers.h +++ b/users/rupa/wrappers.h @@ -28,14 +28,14 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #define G_LWR LT(_LOWER, KC_G) #if defined(UNICODEMAP_ENABLE) -# define CSHAPES XP(CCIR,CKEY) -# define CUIDADO XP(CUI,HAS) -# define NOPENAH XP(NOPE,STOP) -# define MUSIC_A XP(M4,M8) -# define MUSIC_B XP(M8B,M16) -# define SMILE XP(SMB,SMW) -# define STARS XP(STB,STW) -# define YEPYEP XP(CHEK,HUN) +# define CSHAPES UP(CCIR,CKEY) +# define CUIDADO UP(CUI,HAS) +# define NOPENAH UP(NOPE,STOP) +# define MUSIC_A UP(M4,M8) +# define MUSIC_B UP(M8B,M16) +# define SMILE UP(SMB,SMW) +# define STARS UP(STB,STW) +# define YEPYEP UP(CHEK,HUN) #endif /* _QWERTY @@ -70,10 +70,10 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. * │RCtl│RAlt│RGui│ FLIP │ │ │ │M← │M↓ │M→ │ * └────┴────┴────┴────────────────────────┴───┴───┴───┴───┴───┴───┘ */ -#define ____65_RAISE_______________ROW1 KC_GRV, X(IBNG), X(IRNY), _______, X(CENT), _______, _______, _______, STARS, _______, SMILE, X(NEG), CSHAPES, KC_DEL, KC_HOME -#define ____65_RAISE_______________ROW2 _______, _______, WAT, X(LEXI), RUPA, TADA, YUNO, _______, X(LELM), X(OM), _______, MUSIC_A, MUSIC_B, _______, KC_INS -#define ____65_RAISE_______________ROW3 _______, X(LALL), X(EFF), DICE, FART, _______, HUGS, JOY, KISS, LOD, _______, NOPENAH, YEPYEP, KC_END -#define ____65_RAISE_______________ROW4 OS_RSFT, CUIDADO, X(ECKS), CATS, DOMO, BUGS, X(NUM), MUSIC, DANCE, X(LPRO), SHRUG, KC_BTN1, KC_MS_U, KC_BTN2 +#define ____65_RAISE_______________ROW1 KC_GRV, UM(IBNG), UM(IRNY), _______, UM(CENT), _______, _______, _______, STARS, _______, SMILE, UM(NEG), CSHAPES, KC_DEL, KC_HOME +#define ____65_RAISE_______________ROW2 _______, _______, WAT, UM(LEXI), RUPA, TADA, YUNO, _______, UM(LELM), UM(OM), _______, MUSIC_A, MUSIC_B, _______, KC_INS +#define ____65_RAISE_______________ROW3 _______, UM(LALL), UM(EFF), DICE, FART, _______, HUGS, JOY, KISS, LOD, _______, NOPENAH, YEPYEP, KC_END +#define ____65_RAISE_______________ROW4 OS_RSFT, CUIDADO, UM(ECKS), CATS, DOMO, BUGS, UM(NUM), MUSIC, DANCE, UM(LPRO), SHRUG, KC_BTN1, KC_MS_U, KC_BTN2 #define ____65_RAISE_______________ROW5 OS_RCTL, OS_RALT, OS_RGUI, FLIP, _______, _______, _______, KC_MS_L, KC_MS_D, KC_MS_R /* _LOWER diff --git a/users/spidey3/layer_rgb.c b/users/spidey3/layer_rgb.c index cff20898cd..be76788d21 100644 --- a/users/spidey3/layer_rgb.c +++ b/users/spidey3/layer_rgb.c @@ -73,9 +73,9 @@ const rgblight_segment_t *const PROGMEM _rgb_layers[] = { [LAYER_OFFSET + _NUMPAD] = _layer1_layer, [LAYER_OFFSET + _FN] = _layer2_layer, - [LOCK_OFFSET + USB_LED_NUM_LOCK] = _numlock_layer, - [LOCK_OFFSET + USB_LED_CAPS_LOCK] = _capslock_layer, - [LOCK_OFFSET + USB_LED_SCROLL_LOCK] = _scrolllock_layer, + [LOCK_OFFSET + 0] = _numlock_layer, + [LOCK_OFFSET + 1] = _capslock_layer, + [LOCK_OFFSET + 2] = _scrolllock_layer, [MISC_OFFSET + 0] = _gflock_layer, [MISC_OFFSET + 1] = _glyphreplace_layer, @@ -374,9 +374,9 @@ layer_state_t layer_state_set_user_rgb(layer_state_t state) { } bool led_update_user_rgb(led_t led_state) { - rgblight_set_layer_state(LOCK_OFFSET + USB_LED_NUM_LOCK, led_state.num_lock); - rgblight_set_layer_state(LOCK_OFFSET + USB_LED_CAPS_LOCK, led_state.caps_lock); - rgblight_set_layer_state(LOCK_OFFSET + USB_LED_SCROLL_LOCK, led_state.scroll_lock); + rgblight_set_layer_state(LOCK_OFFSET + 0, led_state.num_lock); + rgblight_set_layer_state(LOCK_OFFSET + 1, led_state.caps_lock); + rgblight_set_layer_state(LOCK_OFFSET + 2, led_state.scroll_lock); return true; } diff --git a/users/spidey3/spidey3_unicode.h b/users/spidey3/spidey3_unicode.h index ee8e00056c..4a3657fdfd 100644 --- a/users/spidey3/spidey3_unicode.h +++ b/users/spidey3/spidey3_unicode.h @@ -25,7 +25,7 @@ enum unicode_names { SURPRISE, }; -# define X_BUL (XP(BUL1, BUL2)) -# define X_DASH (XP(EMDASH, ENDASH)) +# define X_BUL (UP(BUL1, BUL2)) +# define X_DASH (UP(EMDASH, ENDASH)) #endif diff --git a/users/turbomech/backupturbomech.c b/users/turbomech/backupturbomech.c index 3671d27ab4..70d3d065c4 100644 --- a/users/turbomech/backupturbomech.c +++ b/users/turbomech/backupturbomech.c @@ -135,14 +135,15 @@ void matrix_init_user(void) { } static bool is_capslocked = false; -void led_set_user(uint8_t usb_led) { - if (usb_led & (1<<USB_LED_CAPS_LOCK)) { +bool led_update_user(led_t led_state) { + if (led_state.caps_lock) { is_capslocked = true; // DDRB |= (1 << 2); PORTB &= ~(1 << 2); } else { is_capslocked = false; // DDRB &= ~(1 << 2); PORTB &= ~(1 << 2); } + return false; } //rgblight_set(); diff --git a/users/turbomech/turbomech.c b/users/turbomech/turbomech.c index 892db1b927..75796fb8fb 100644 --- a/users/turbomech/turbomech.c +++ b/users/turbomech/turbomech.c @@ -101,8 +101,7 @@ bool process_record_user(uint16_t keycode, keyrecord_t *record) { if (record->event.pressed) { register_code(KC_LPRN); unregister_code(KC_LPRN); - register_code(X(0x00B0)); - unregister_code(X(0x00B0)); + register_unicode(0x00B0); UC(0x256F); PROCESS_UNICODE(UC(0x00B0)); diff --git a/users/xulkal/custom_oled.c b/users/xulkal/custom_oled.c index fd03033ad6..c6341fa3d7 100644 --- a/users/xulkal/custom_oled.c +++ b/users/xulkal/custom_oled.c @@ -71,15 +71,15 @@ static void render_layer(void) static void render_keyboard_leds(void) { // Host Keyboard LED Status - uint8_t led_state = host_keyboard_leds(); + led_t led_state = host_keyboard_led_state(); #ifdef OLED_90ROTATION - oled_write_P(IS_LED_ON(led_state, USB_LED_NUM_LOCK) ? PSTR("NUMLK") : PSTR(" "), false); - oled_write_P(IS_LED_ON(led_state, USB_LED_CAPS_LOCK) ? PSTR("CAPLK") : PSTR(" "), false); - oled_write_P(IS_LED_ON(led_state, USB_LED_SCROLL_LOCK) ? PSTR("SCRLK") : PSTR(" "), false); + oled_write_P(led_state.num_lock ? PSTR("NUMLK") : PSTR(" "), false); + oled_write_P(led_state.caps_lock ? PSTR("CAPLK") : PSTR(" "), false); + oled_write_P(led_state.scroll_lock ? PSTR("SCRLK") : PSTR(" "), false); #else - oled_write_P(IS_LED_ON(led_state, USB_LED_NUM_LOCK) ? PSTR("NUM ") : PSTR(" "), false); - oled_write_P(IS_LED_ON(led_state, USB_LED_CAPS_LOCK) ? PSTR("CAPS ") : PSTR(" "), false); - oled_write_P(IS_LED_ON(led_state, USB_LED_SCROLL_LOCK) ? PSTR("SCRL") : PSTR(" "), false); + oled_write_P(led_state.num_lock ? PSTR("NUM ") : PSTR(" "), false); + oled_write_P(led_state.caps_lock ? PSTR("CAPS ") : PSTR(" "), false); + oled_write_P(led_state.scroll_lock ? PSTR("SCRL") : PSTR(" "), false); #endif } diff --git a/users/yet-another-developer/unicode.h b/users/yet-another-developer/unicode.h index 9ff523baad..340b4cf94b 100644 --- a/users/yet-another-developer/unicode.h +++ b/users/yet-another-developer/unicode.h @@ -2,7 +2,6 @@ #include "quantum.h" -/* use X(n) to call the */ #ifdef UNICODEMAP_ENABLE enum unicode_name { OKOK, // diff --git a/users/yet-another-developer/wrappers.h b/users/yet-another-developer/wrappers.h index cd21032a4e..776da0c77e 100644 --- a/users/yet-another-developer/wrappers.h +++ b/users/yet-another-developer/wrappers.h @@ -118,13 +118,13 @@ NOTE: These are all the same length. If you do a search/replace #endif #ifdef UNICODEMAP_ENABLE -#define _______________UNICODE_L1__________________ X(SMRK), X(THINK), X(CLOWN), X(HUNDR), X(BANG) -#define _______________UNICODE_L2__________________ X(GRIN), X(MONKEY), X(OKOK), X(EGGPL), X(LIT) -#define _______________UNICODE_L3__________________ X(WEARY), X(UNAMU), X(EFFU), X(MONOCL), X(IRONY) +#define _______________UNICODE_L1__________________ UM(SMRK), UM(THINK), UM(CLOWN), UM(HUNDR), UM(BANG) +#define _______________UNICODE_L2__________________ UM(GRIN), UM(MONKEY), UM(OKOK), UM(EGGPL), UM(LIT) +#define _______________UNICODE_L3__________________ UM(WEARY), UM(UNAMU), UM(EFFU), UM(MONOCL), UM(IRONY) -#define _______________UNICODE_R1__________________ X(DRUG0), X(THUP), X(INUP), X(DIZZY), X(COOL) -#define _______________UNICODE_R2__________________ X(FIST0), X(FIST2),X(FIST3),X(FIST1), X(OKOK) -#define _______________UNICODE_R3__________________ X(MNDBLWN), X(THDN), X(SPOCK),X(HOLE), X(DASH) +#define _______________UNICODE_R1__________________ UM(DRUG0), UM(THUP), UM(INUP), UM(DIZZY), UM(COOL) +#define _______________UNICODE_R2__________________ UM(FIST0), UM(FIST2),UM(FIST3),UM(FIST1), UM(OKOK) +#define _______________UNICODE_R3__________________ UM(MNDBLWN), UM(THDN), UM(SPOCK),UM(HOLE), UM(DASH) #endif #define ________________NUMBER_LEFT________________ KC_1, KC_2, KC_3, KC_4, KC_5 diff --git a/users/zer09/zer09.c b/users/zer09/zer09.c index 78433b4c20..5e192f037a 100644 --- a/users/zer09/zer09.c +++ b/users/zer09/zer09.c @@ -69,8 +69,8 @@ bool process_record_user(uint16_t keycode, keyrecord_t *record) { return process_record_keymap(keycode, record); } -void led_set_user(uint8_t usb_led) { - if (usb_led & (1 << USB_LED_CAPS_LOCK)) { +bool led_update_user(led_t led_state) { + if (led_state.caps_lock) { rbw_led_keys[RBW_LCAP].status = ENABLED; rbw_led_keys[RBW_RCAP].status = ENABLED; } else { @@ -78,11 +78,12 @@ void led_set_user(uint8_t usb_led) { rbw_led_keys[RBW_RCAP].status = DISABLED; } - if (usb_led & (1 << USB_LED_SCROLL_LOCK)) { + if (led_state.scroll_lock) { rbw_led_keys[RBW_SCRL].status = ENABLED; } else { rbw_led_keys[RBW_SCRL].status = DISABLED; } - led_set_keymap(usb_led); + led_set_keymap(led_state.raw); + return false; } diff --git a/util/uf2conv.py b/util/uf2conv.py index 578b2b4977..84271cee4f 100755 --- a/util/uf2conv.py +++ b/util/uf2conv.py @@ -74,7 +74,7 @@ def convert_from_uf2(buf): assert False, "Non-word padding size at " + ptr while padding > 0: padding -= 4 - outp += b"\x00\x00\x00\x00" + outp.append(b"\x00\x00\x00\x00") if familyid == 0x0 or ((hd[2] & 0x2000) and familyid == hd[7]): outp.append(block[32 : 32 + datalen]) curraddr = newaddr + datalen @@ -218,18 +218,17 @@ def get_drives(): if len(words) >= 3 and words[1] == "2" and words[2] == "FAT": drives.append(words[0]) else: - rootpath = "/media" + searchpaths = ["/media"] if sys.platform == "darwin": - rootpath = "/Volumes" + searchpaths = ["/Volumes"] elif sys.platform == "linux": - tmp = rootpath + "/" + os.environ["USER"] - if os.path.isdir(tmp): - rootpath = tmp - tmp = "/run" + rootpath + "/" + os.environ["USER"] - if os.path.isdir(tmp): - rootpath = tmp - for d in os.listdir(rootpath): - drives.append(os.path.join(rootpath, d)) + searchpaths += ["/media/" + os.environ["USER"], '/run/media/' + os.environ["USER"]] + + for rootpath in searchpaths: + if os.path.isdir(rootpath): + for d in os.listdir(rootpath): + if os.path.isdir(rootpath): + drives.append(os.path.join(rootpath, d)) def has_info(d): diff --git a/util/uf2families.json b/util/uf2families.json index c2140fe351..778af4421f 100644 --- a/util/uf2families.json +++ b/util/uf2families.json @@ -203,5 +203,15 @@ "id": "0x11de784a", "short_name": "M0SENSE", "description": "M0SENSE BL702" + }, + { + "id": "0x4b684d71", + "short_name": "MaixPlay-U4", + "description": "Sipeed MaixPlay-U4(BL618)" + }, + { + "id": "0x9517422f", + "short_name": "RZA1LU", + "description": "Renesas RZ/A1LU (R7S7210xx)" } -]
\ No newline at end of file +] |