summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
-rw-r--r--keyboards/cablecardesigns/cypher/rev6/config.h7
-rw-r--r--keyboards/cablecardesigns/cypher/rev6/info.json5
-rw-r--r--keyboards/caffeinated/serpent65/config.h23
-rw-r--r--keyboards/caffeinated/serpent65/info.json5
-rw-r--r--keyboards/canary/canary60rgb/info.json5
-rw-r--r--keyboards/canary/canary60rgb/v1/config.h16
-rw-r--r--keyboards/cannonkeys/adelie/config.h17
-rw-r--r--keyboards/cannonkeys/adelie/info.json5
-rw-r--r--keyboards/cannonkeys/aella/config.h4
-rw-r--r--keyboards/cannonkeys/aella/info.json5
-rw-r--r--keyboards/cannonkeys/an_c/config.h4
-rw-r--r--keyboards/cannonkeys/an_c/info.json5
-rw-r--r--keyboards/cannonkeys/atlas/config.h4
-rw-r--r--keyboards/cannonkeys/atlas/info.json5
-rw-r--r--keyboards/cannonkeys/atlas_alps/config.h9
-rw-r--r--keyboards/cannonkeys/atlas_alps/info.json5
-rw-r--r--keyboards/cannonkeys/balance/config.h4
-rw-r--r--keyboards/cannonkeys/balance/info.json5
-rw-r--r--keyboards/cannonkeys/brutalv2_65/config.h4
-rw-r--r--keyboards/cannonkeys/brutalv2_65/info.json5
-rw-r--r--keyboards/cannonkeys/chimera65/config.h4
-rw-r--r--keyboards/cannonkeys/chimera65/info.json5
-rw-r--r--keyboards/cannonkeys/cloudline/config.h4
-rw-r--r--keyboards/cannonkeys/cloudline/info.json5
-rw-r--r--keyboards/cannonkeys/crin/config.h5
-rw-r--r--keyboards/cannonkeys/crin/info.json5
-rw-r--r--keyboards/cannonkeys/db60/config.h5
-rw-r--r--keyboards/cannonkeys/db60/info.json5
-rw-r--r--keyboards/cannonkeys/devastatingtkl/config.h4
-rw-r--r--keyboards/cannonkeys/devastatingtkl/info.json5
-rw-r--r--keyboards/cannonkeys/gentoo/config.h4
-rw-r--r--keyboards/cannonkeys/gentoo/info.json5
-rw-r--r--keyboards/cannonkeys/gentoo_hs/config.h4
-rw-r--r--keyboards/cannonkeys/gentoo_hs/info.json5
-rw-r--r--keyboards/cannonkeys/hoodrowg/config.h5
-rw-r--r--keyboards/cannonkeys/hoodrowg/info.json5
-rw-r--r--keyboards/cannonkeys/instant60/config.h4
-rw-r--r--keyboards/cannonkeys/instant60/info.json5
-rw-r--r--keyboards/cannonkeys/instant65/config.h4
-rw-r--r--keyboards/cannonkeys/instant65/info.json5
-rw-r--r--keyboards/cannonkeys/iron165/config.h4
-rw-r--r--keyboards/cannonkeys/iron165/info.json5
-rw-r--r--keyboards/cannonkeys/malicious_ergo/config.h4
-rw-r--r--keyboards/cannonkeys/malicious_ergo/info.json5
-rwxr-xr-xkeyboards/cannonkeys/nearfield/config.h26
-rw-r--r--keyboards/cannonkeys/nearfield/info.json5
-rw-r--r--keyboards/cannonkeys/obliterated75/config.h4
-rw-r--r--keyboards/cannonkeys/obliterated75/info.json5
-rw-r--r--keyboards/cannonkeys/onyx/config.h4
-rw-r--r--keyboards/cannonkeys/onyx/info.json5
-rw-r--r--keyboards/cannonkeys/ortho48/config.h4
-rw-r--r--keyboards/cannonkeys/ortho48/info.json5
-rw-r--r--keyboards/cannonkeys/ortho60/config.h4
-rw-r--r--keyboards/cannonkeys/ortho60/info.json5
-rw-r--r--keyboards/cannonkeys/ortho75/config.h4
-rw-r--r--keyboards/cannonkeys/ortho75/info.json5
-rw-r--r--keyboards/cannonkeys/practice60/config.h4
-rw-r--r--keyboards/cannonkeys/practice60/info.json5
-rw-r--r--keyboards/cannonkeys/practice65/config.h4
-rw-r--r--keyboards/cannonkeys/practice65/info.json5
-rw-r--r--keyboards/cannonkeys/rekt1800/config.h4
-rw-r--r--keyboards/cannonkeys/rekt1800/info.json5
-rw-r--r--keyboards/cannonkeys/sagittarius/config.h4
-rw-r--r--keyboards/cannonkeys/sagittarius/info.json5
-rw-r--r--keyboards/cannonkeys/satisfaction75/config.h4
-rw-r--r--keyboards/cannonkeys/satisfaction75/info.json5
-rw-r--r--keyboards/cannonkeys/savage65/config.h4
-rw-r--r--keyboards/cannonkeys/savage65/info.json5
-rw-r--r--keyboards/cannonkeys/tmov2/config.h4
-rw-r--r--keyboards/cannonkeys/tmov2/info.json5
-rw-r--r--keyboards/cannonkeys/tsukuyomi/config.h4
-rw-r--r--keyboards/cannonkeys/tsukuyomi/info.json5
-rw-r--r--keyboards/cannonkeys/vicious40/config.h4
-rw-r--r--keyboards/cannonkeys/vicious40/info.json5
-rw-r--r--keyboards/capsunlocked/cu24/config.h17
-rw-r--r--keyboards/capsunlocked/cu24/info.json5
-rw-r--r--keyboards/capsunlocked/cu65/config.h17
-rw-r--r--keyboards/capsunlocked/cu65/info.json5
-rw-r--r--keyboards/capsunlocked/cu7/config.h17
-rw-r--r--keyboards/capsunlocked/cu7/info.json5
-rw-r--r--keyboards/capsunlocked/cu75/config.h5
-rw-r--r--keyboards/capsunlocked/cu75/info.json5
-rw-r--r--keyboards/capsunlocked/cu80/v1/config.h7
-rw-r--r--keyboards/capsunlocked/cu80/v1/info.json5
-rw-r--r--keyboards/carbo65/config.h7
-rw-r--r--keyboards/carbo65/info.json5
-rw-r--r--keyboards/catch22/config.h8
-rw-r--r--keyboards/catch22/info.json5
-rw-r--r--keyboards/cest73/tkm/config.h13
-rw-r--r--keyboards/cest73/tkm/info.json5
-rw-r--r--keyboards/chalice/config.h7
-rw-r--r--keyboards/chalice/info.json5
-rw-r--r--keyboards/chaos65/config.h8
-rw-r--r--keyboards/chaos65/info.json5
-rw-r--r--keyboards/charue/charon/config.h24
-rw-r--r--keyboards/charue/charon/info.json5
-rw-r--r--keyboards/charue/sunsetter/config.h22
-rw-r--r--keyboards/charue/sunsetter/info.json5
-rw-r--r--keyboards/charue/sunsetter_r2/config.h8
-rw-r--r--keyboards/charue/sunsetter_r2/info.json5
-rw-r--r--keyboards/chavdai40/rev1/config.h6
-rw-r--r--keyboards/chavdai40/rev1/info.json5
-rw-r--r--keyboards/chavdai40/rev2/config.h6
-rw-r--r--keyboards/chavdai40/rev2/info.json5
-rw-r--r--keyboards/checkerboards/axon40/config.h9
-rw-r--r--keyboards/checkerboards/axon40/info.json5
-rw-r--r--keyboards/checkerboards/candybar_ortho/config.h9
-rw-r--r--keyboards/checkerboards/candybar_ortho/info.json5
-rw-r--r--keyboards/checkerboards/g_idb60/config.h8
-rw-r--r--keyboards/checkerboards/g_idb60/info.json5
-rw-r--r--keyboards/checkerboards/nop60/config.h8
-rw-r--r--keyboards/checkerboards/nop60/info.json5
-rw-r--r--keyboards/checkerboards/phoenix45_ortho/config.h8
-rw-r--r--keyboards/checkerboards/phoenix45_ortho/info.json5
-rw-r--r--keyboards/checkerboards/plexus75/config.h7
-rw-r--r--keyboards/checkerboards/plexus75/info.json5
-rw-r--r--keyboards/checkerboards/plexus75_he/config.h8
-rw-r--r--keyboards/checkerboards/plexus75_he/info.json5
-rw-r--r--keyboards/checkerboards/pursuit40/config.h8
-rw-r--r--keyboards/checkerboards/pursuit40/info.json5
-rw-r--r--keyboards/checkerboards/quark/config.h8
-rw-r--r--keyboards/checkerboards/quark/info.json5
-rw-r--r--keyboards/checkerboards/quark_lp/config.h7
-rw-r--r--keyboards/checkerboards/quark_lp/info.json5
-rw-r--r--keyboards/checkerboards/quark_plus/config.h8
-rw-r--r--keyboards/checkerboards/quark_plus/info.json5
-rw-r--r--keyboards/checkerboards/quark_squared/config.h8
-rw-r--r--keyboards/checkerboards/quark_squared/info.json5
-rw-r--r--keyboards/checkerboards/snop60/config.h8
-rw-r--r--keyboards/checkerboards/snop60/info.json5
-rw-r--r--keyboards/checkerboards/ud40_ortho_alt/config.h8
-rw-r--r--keyboards/checkerboards/ud40_ortho_alt/info.json5
-rw-r--r--keyboards/cherrybstudio/cb1800/config.h18
-rw-r--r--keyboards/cherrybstudio/cb1800/info.json5
-rw-r--r--keyboards/cherrybstudio/cb65/config.h18
-rw-r--r--keyboards/cherrybstudio/cb65/info.json5
-rw-r--r--keyboards/cherrybstudio/cb87/config.h18
-rw-r--r--keyboards/cherrybstudio/cb87/info.json5
-rw-r--r--keyboards/cherrybstudio/cb87rgb/config.h18
-rw-r--r--keyboards/cherrybstudio/cb87rgb/info.json5
-rw-r--r--keyboards/cherrybstudio/cb87v2/config.h18
-rw-r--r--keyboards/cherrybstudio/cb87v2/info.json5
-rw-r--r--keyboards/cheshire/curiosity/config.h6
-rw-r--r--keyboards/cheshire/curiosity/info.json5
-rw-r--r--keyboards/chickenman/ciel/config.h17
-rw-r--r--keyboards/chickenman/ciel/info.json5
-rw-r--r--keyboards/chlx/merro60/config.h16
-rw-r--r--keyboards/chlx/merro60/info.json5
-rw-r--r--keyboards/chlx/str_merro60/config.h17
-rw-r--r--keyboards/chlx/str_merro60/info.json5
-rw-r--r--keyboards/chocofly/v1/config.h9
-rw-r--r--keyboards/chocofly/v1/info.json5
-rw-r--r--keyboards/chocv/config.h24
-rw-r--r--keyboards/chocv/info.json5
-rw-r--r--keyboards/cipulot/kallos/config.h10
-rw-r--r--keyboards/cipulot/kallos/info.json5
-rw-r--r--keyboards/cipulot/kawayo/config.h8
-rw-r--r--keyboards/cipulot/kawayo/info.json5
-rw-r--r--keyboards/ck60i/config.h4
-rw-r--r--keyboards/ck60i/info.json5
-rwxr-xr-xkeyboards/ckeys/handwire_101/config.h17
-rw-r--r--keyboards/ckeys/handwire_101/info.json5
-rw-r--r--keyboards/ckeys/nakey/config.h17
-rw-r--r--keyboards/ckeys/nakey/info.json5
-rw-r--r--keyboards/ckeys/obelus/config.h17
-rw-r--r--keyboards/ckeys/obelus/info.json5
-rwxr-xr-xkeyboards/ckeys/thedora/config.h7
-rw-r--r--keyboards/ckeys/thedora/info.json5
-rw-r--r--keyboards/ckeys/washington/config.h17
-rw-r--r--keyboards/ckeys/washington/info.json5
-rw-r--r--keyboards/clawsome/bookerboard/config.h34
-rw-r--r--keyboards/clawsome/bookerboard/info.json5
-rw-r--r--keyboards/clawsome/coupe/config.h34
-rw-r--r--keyboards/clawsome/coupe/info.json5
-rw-r--r--keyboards/clawsome/doodle/config.h33
-rw-r--r--keyboards/clawsome/doodle/info.json5
-rw-r--r--keyboards/clawsome/fightpad/config.h34
-rw-r--r--keyboards/clawsome/fightpad/info.json5
-rw-r--r--keyboards/clawsome/gamebuddy/v1_0/config.h24
-rw-r--r--keyboards/clawsome/gamebuddy/v1_0/info.json5
-rw-r--r--keyboards/clawsome/gamebuddy/v1_m/config.h33
-rw-r--r--keyboards/clawsome/gamebuddy/v1_m/info.json5
-rw-r--r--keyboards/clawsome/hatchback/config.h33
-rw-r--r--keyboards/clawsome/hatchback/info.json5
-rw-r--r--keyboards/clawsome/luggage_rack/config.h33
-rw-r--r--keyboards/clawsome/luggage_rack/info.json5
-rw-r--r--keyboards/clawsome/numeros/config.h34
-rw-r--r--keyboards/clawsome/numeros/info.json5
-rw-r--r--keyboards/clawsome/roadster/config.h34
-rw-r--r--keyboards/clawsome/roadster/info.json5
-rw-r--r--keyboards/clawsome/sedan/config.h34
-rw-r--r--keyboards/clawsome/sedan/info.json5
-rw-r--r--keyboards/clawsome/sidekick/config.h24
-rw-r--r--keyboards/clawsome/sidekick/info.json5
-rw-r--r--keyboards/clawsome/suv/config.h33
-rw-r--r--keyboards/clawsome/suv/info.json5
-rw-r--r--keyboards/clickety_split/leeloo/info.json5
-rw-r--r--keyboards/clickety_split/leeloo/rev1/config.h6
-rw-r--r--keyboards/cmm_studio/fuji65/config.h16
-rw-r--r--keyboards/cmm_studio/fuji65/info.json5
-rw-r--r--keyboards/cmm_studio/saka68/hotswap/config.h35
-rw-r--r--keyboards/cmm_studio/saka68/hotswap/info.json5
-rw-r--r--keyboards/cmm_studio/saka68/solder/config.h33
-rw-r--r--keyboards/cmm_studio/saka68/solder/info.json5
-rw-r--r--keyboards/coarse/cordillera/config.h4
-rw-r--r--keyboards/coarse/cordillera/info.json5
-rw-r--r--keyboards/coarse/ixora/config.h8
-rw-r--r--keyboards/coarse/ixora/info.json5
-rw-r--r--keyboards/coarse/vinta/config.h8
-rw-r--r--keyboards/coarse/vinta/info.json5
-rw-r--r--keyboards/compound/config.h27
-rw-r--r--keyboards/compound/info.json5
-rw-r--r--keyboards/contender/config.h17
-rw-r--r--keyboards/contender/info.json5
-rw-r--r--keyboards/converter/a1200/miss1200/config.h40
-rw-r--r--keyboards/converter/a1200/miss1200/info.json5
-rw-r--r--keyboards/converter/a1200/mistress1200/config.h17
-rw-r--r--keyboards/converter/a1200/mistress1200/info.json5
-rw-r--r--keyboards/converter/a1200/teensy2pp/config.h40
-rw-r--r--keyboards/converter/a1200/teensy2pp/info.json5
-rw-r--r--keyboards/converter/modelm101/config.h17
-rw-r--r--keyboards/converter/modelm101/info.json5
-rw-r--r--keyboards/converter/modelm101_teensy2/config.h17
-rw-r--r--keyboards/converter/modelm101_teensy2/info.json5
-rw-r--r--keyboards/converter/modelm_ssk/config.h17
-rw-r--r--keyboards/converter/modelm_ssk/info.json5
-rw-r--r--keyboards/converter/numeric_keypad_iie/config.h87
-rw-r--r--keyboards/converter/numeric_keypad_iie/info.json5
-rw-r--r--keyboards/converter/siemens_tastatur/config.h5
-rw-r--r--keyboards/cool836a/config.h18
-rw-r--r--keyboards/cool836a/info.json5
-rwxr-xr-xkeyboards/copenhagen_click/click_pad_v1/config.h17
-rwxr-xr-xkeyboards/copenhagen_click/click_pad_v1/info.json5
-rw-r--r--keyboards/coseyfannitutti/discipad/config.h19
-rw-r--r--keyboards/coseyfannitutti/discipad/info.json5
-rw-r--r--keyboards/coseyfannitutti/discipline/config.h18
-rw-r--r--keyboards/coseyfannitutti/discipline/info.json5
-rw-r--r--keyboards/coseyfannitutti/mullet/config.h17
-rw-r--r--keyboards/coseyfannitutti/mullet/info.json5
-rw-r--r--keyboards/coseyfannitutti/mulletpad/config.h51
-rw-r--r--keyboards/coseyfannitutti/mulletpad/info.json5
-rw-r--r--keyboards/coseyfannitutti/mysterium/config.h18
-rw-r--r--keyboards/coseyfannitutti/mysterium/info.json5
-rw-r--r--keyboards/coseyfannitutti/romeo/config.h20
-rw-r--r--keyboards/coseyfannitutti/romeo/info.json5
-rw-r--r--keyboards/cosmo65/config.h5
-rw-r--r--keyboards/cosmo65/info.json5
-rw-r--r--keyboards/cozykeys/bloomer/v2/config.h24
-rw-r--r--keyboards/cozykeys/bloomer/v2/info.json5
-rw-r--r--keyboards/cozykeys/bloomer/v3/config.h24
-rw-r--r--keyboards/cozykeys/bloomer/v3/info.json5
-rw-r--r--keyboards/cozykeys/speedo/v2/config.h6
-rw-r--r--keyboards/cozykeys/speedo/v2/info.json5
-rw-r--r--keyboards/cozykeys/speedo/v3/config.h6
-rw-r--r--keyboards/cozykeys/speedo/v3/info.json5
-rw-r--r--keyboards/craftwalk/config.h17
-rw-r--r--keyboards/craftwalk/info.json5
-rwxr-xr-xkeyboards/crawlpad/config.h8
-rw-r--r--keyboards/crawlpad/info.json5
-rw-r--r--keyboards/crazy_keyboard_68/config.h17
-rw-r--r--keyboards/crazy_keyboard_68/info.json5
-rw-r--r--keyboards/crbn/config.h8
-rw-r--r--keyboards/crbn/info.json5
-rw-r--r--keyboards/creatkeebs/glacier/config.h8
-rw-r--r--keyboards/creatkeebs/glacier/info.json5
-rw-r--r--keyboards/creatkeebs/thera/config.h8
-rw-r--r--keyboards/creatkeebs/thera/info.json5
-rw-r--r--keyboards/crimsonkeyboards/resume1800/config.h18
-rw-r--r--keyboards/crimsonkeyboards/resume1800/info.json5
-rw-r--r--keyboards/crin/config.h4
-rw-r--r--keyboards/crin/info.json5
-rw-r--r--keyboards/crkbd/config.h44
-rw-r--r--keyboards/crkbd/info.json5
-rw-r--r--keyboards/crkbd/r2g/config.h2
-rw-r--r--keyboards/crkbd/rev1/config.h2
-rw-r--r--keyboards/custommk/genesis/rev1/config.h8
-rw-r--r--keyboards/custommk/genesis/rev1/info.json5
-rw-r--r--keyboards/custommk/genesis/rev2/config.h8
-rw-r--r--keyboards/custommk/genesis/rev2/info.json5
-rw-r--r--keyboards/cutie_club/borsdorf/config.h10
-rw-r--r--keyboards/cutie_club/borsdorf/info.json5
-rwxr-xr-xkeyboards/cutie_club/giant_macro_pad/config.h10
-rw-r--r--keyboards/cutie_club/giant_macro_pad/info.json5
-rw-r--r--keyboards/cutie_club/keebcats/denis/config.h10
-rw-r--r--keyboards/cutie_club/keebcats/denis/info.json5
-rw-r--r--keyboards/cutie_club/keebcats/dougal/config.h10
-rw-r--r--keyboards/cutie_club/keebcats/dougal/info.json5
-rw-r--r--keyboards/cutie_club/novus/config.h17
-rw-r--r--keyboards/cutie_club/novus/info.json5
-rw-r--r--keyboards/cutie_club/wraith/config.h17
-rw-r--r--keyboards/cutie_club/wraith/info.json5
-rw-r--r--keyboards/cx60/config.h8
-rw-r--r--keyboards/cx60/info.json5
-rw-r--r--keyboards/handwired/108key_trackpoint/config.h6
-rw-r--r--keyboards/handwired/108key_trackpoint/info.json5
-rw-r--r--keyboards/handwired/2x5keypad/config.h8
-rw-r--r--keyboards/handwired/2x5keypad/info.json5
-rw-r--r--keyboards/handwired/3dfoxc/config.h33
-rw-r--r--keyboards/handwired/3dfoxc/info.json5
-rw-r--r--keyboards/handwired/3dp660/config.h8
-rw-r--r--keyboards/handwired/3dp660/info.json5
-rw-r--r--keyboards/handwired/412_64/config.h17
-rw-r--r--keyboards/handwired/412_64/info.json5
-rw-r--r--keyboards/handwired/42/config.h17
-rw-r--r--keyboards/handwired/42/info.json5
-rw-r--r--keyboards/handwired/6key/config.h8
-rw-r--r--keyboards/handwired/6key/info.json5
-rw-r--r--keyboards/handwired/6macro/config.h8
-rw-r--r--keyboards/handwired/6macro/info.json5
-rw-r--r--keyboards/handwired/aek64/config.h7
-rw-r--r--keyboards/handwired/aek64/info.json5
-rw-r--r--keyboards/handwired/aim65/config.h33
-rw-r--r--keyboards/handwired/aim65/info.json5
-rw-r--r--keyboards/handwired/amigopunk/config.h8
-rw-r--r--keyboards/handwired/amigopunk/info.json5
-rw-r--r--keyboards/handwired/angel/config.h11
-rw-r--r--keyboards/handwired/angel/info.json5
-rw-r--r--keyboards/handwired/aplx2/config.h27
-rw-r--r--keyboards/handwired/aplx2/info.json5
-rw-r--r--keyboards/handwired/aranck/config.h19
-rw-r--r--keyboards/handwired/aranck/info.json5
-rw-r--r--keyboards/handwired/arrow_pad/config.h17
-rw-r--r--keyboards/handwired/arrow_pad/info.json5
-rw-r--r--keyboards/handwired/atreus50/config.h8
-rw-r--r--keyboards/handwired/atreus50/info.json5
-rw-r--r--keyboards/handwired/axon/config.h8
-rw-r--r--keyboards/handwired/axon/info.json5
-rw-r--r--keyboards/handwired/battleship_gamepad/config.h8
-rw-r--r--keyboards/handwired/battleship_gamepad/info.json5
-rw-r--r--keyboards/handwired/bigmac/config.h33
-rw-r--r--keyboards/handwired/bigmac/info.json5
-rw-r--r--keyboards/handwired/bolek/config.h17
-rw-r--r--keyboards/handwired/bolek/info.json5
-rw-r--r--keyboards/handwired/boss566y/redragon_vara/config.h34
-rw-r--r--keyboards/handwired/boss566y/redragon_vara/info.json5
-rw-r--r--keyboards/handwired/brain/config.h12
-rw-r--r--keyboards/handwired/brain/info.json10
-rw-r--r--keyboards/handwired/bstk100/config.h17
-rw-r--r--keyboards/handwired/bstk100/info.json5
-rw-r--r--keyboards/handwired/cans12er/config.h8
-rw-r--r--keyboards/handwired/cans12er/info.json5
-rw-r--r--keyboards/handwired/carpolly/config.h37
-rw-r--r--keyboards/handwired/carpolly/info.json5
-rw-r--r--keyboards/handwired/chiron/config.h9
-rw-r--r--keyboards/handwired/chiron/info.json5
-rw-r--r--keyboards/handwired/ck4x4/config.h4
-rw-r--r--keyboards/handwired/ck4x4/info.json5
-rw-r--r--keyboards/handwired/cmd60/config.h17
-rw-r--r--keyboards/handwired/cmd60/info.json5
-rw-r--r--keyboards/handwired/co60/rev1/config.h51
-rw-r--r--keyboards/handwired/co60/rev1/info.json5
-rw-r--r--keyboards/handwired/co60/rev6/config.h9
-rw-r--r--keyboards/handwired/co60/rev6/info.json5
-rw-r--r--keyboards/handwired/co60/rev7/config.h9
-rw-r--r--keyboards/handwired/co60/rev7/info.json5
-rw-r--r--keyboards/handwired/colorlice/config.h8
-rw-r--r--keyboards/handwired/colorlice/info.json5
-rw-r--r--keyboards/handwired/concertina/64key/config.h6
-rw-r--r--keyboards/handwired/concertina/64key/info.json5
-rw-r--r--keyboards/handwired/consolekeyboard/18key/config.h16
-rw-r--r--keyboards/handwired/consolekeyboard/18key/info.json5
-rw-r--r--keyboards/handwired/consolekeyboard/20key/config.h16
-rw-r--r--keyboards/handwired/consolekeyboard/20key/info.json5
-rw-r--r--keyboards/handwired/consolekeyboard/27key/config.h16
-rw-r--r--keyboards/handwired/consolekeyboard/27key/info.json5
-rw-r--r--keyboards/handwired/consolekeyboard/30key/config.h16
-rw-r--r--keyboards/handwired/consolekeyboard/30key/info.json5
-rw-r--r--keyboards/handwired/croxsplit44/config.h6
-rw-r--r--keyboards/handwired/croxsplit44/info.json5
-rw-r--r--keyboards/handwired/curiosity/config.h8
-rw-r--r--keyboards/handwired/curiosity/info.json5
-rw-r--r--keyboards/handwired/cyberstar/config.h7
-rw-r--r--keyboards/handwired/cyberstar/info.json5
-rw-r--r--keyboards/handwired/d48/config.h9
-rw-r--r--keyboards/handwired/d48/info.json5
-rw-r--r--keyboards/handwired/dactyl_left/config.h19
-rw-r--r--keyboards/handwired/dactyl_left/info.json5
-rw-r--r--keyboards/handwired/dactyl_manuform/3x5_3/config.h7
-rw-r--r--keyboards/handwired/dactyl_manuform/3x5_3/info.json5
-rw-r--r--keyboards/handwired/dactyl_manuform/4x5/config.h8
-rw-r--r--keyboards/handwired/dactyl_manuform/4x5/info.json5
-rw-r--r--keyboards/handwired/dactyl_manuform/4x5_5/config.h7
-rw-r--r--keyboards/handwired/dactyl_manuform/4x5_5/info.json5
-rw-r--r--keyboards/handwired/dactyl_manuform/4x6/config.h8
-rw-r--r--keyboards/handwired/dactyl_manuform/4x6/info.json5
-rw-r--r--keyboards/handwired/dactyl_manuform/4x6_5/config.h8
-rw-r--r--keyboards/handwired/dactyl_manuform/4x6_5/info.json5
-rw-r--r--keyboards/handwired/dactyl_manuform/5x6/config.h7
-rw-r--r--keyboards/handwired/dactyl_manuform/5x6/info.json5
-rw-r--r--keyboards/handwired/dactyl_manuform/5x6_2_5/config.h33
-rw-r--r--keyboards/handwired/dactyl_manuform/5x6_2_5/info.json5
-rw-r--r--keyboards/handwired/dactyl_manuform/5x6_5/config.h30
-rw-r--r--keyboards/handwired/dactyl_manuform/5x6_5/info.json5
-rw-r--r--keyboards/handwired/dactyl_manuform/5x6_6/config.h24
-rw-r--r--keyboards/handwired/dactyl_manuform/5x6_6/info.json5
-rw-r--r--keyboards/handwired/dactyl_manuform/5x7/config.h7
-rw-r--r--keyboards/handwired/dactyl_manuform/5x7/info.json5
-rw-r--r--keyboards/handwired/dactyl_manuform/6x6/blackpill_f411/config.h5
-rw-r--r--keyboards/handwired/dactyl_manuform/6x6/blackpill_f411/info.json5
-rw-r--r--keyboards/handwired/dactyl_manuform/6x6/promicro/config.h7
-rw-r--r--keyboards/handwired/dactyl_manuform/6x6/promicro/info.json5
-rw-r--r--keyboards/handwired/dactyl_manuform/6x6_4/config.h7
-rw-r--r--keyboards/handwired/dactyl_manuform/6x6_4/info.json5
-rw-r--r--keyboards/handwired/dactyl_manuform/6x6_kinesis/config.h7
-rw-r--r--keyboards/handwired/dactyl_manuform/6x6_kinesis/info.json5
-rw-r--r--keyboards/handwired/dactyl_manuform/6x7/config.h7
-rw-r--r--keyboards/handwired/dactyl_manuform/6x7/info.json5
-rw-r--r--keyboards/handwired/dactyl_manuform/dmote/62key/config.h34
-rw-r--r--keyboards/handwired/dactyl_manuform/dmote/62key/info.json5
-rw-r--r--keyboards/handwired/dactyl_promicro/config.h7
-rw-r--r--keyboards/handwired/dactyl_promicro/info.json5
-rw-r--r--keyboards/handwired/dactyl_rah/config.h7
-rw-r--r--keyboards/handwired/dactyl_rah/info.json5
-rw-r--r--keyboards/handwired/daishi/config.h17
-rw-r--r--keyboards/handwired/daishi/info.json5
-rw-r--r--keyboards/handwired/ddg_56/config.h21
-rw-r--r--keyboards/handwired/ddg_56/info.json5
-rw-r--r--keyboards/handwired/eagleii/config.h6
-rw-r--r--keyboards/handwired/eagleii/info.json5
-rw-r--r--keyboards/handwired/elrgo_s/config.h37
-rw-r--r--keyboards/handwired/elrgo_s/info.json5
-rw-r--r--keyboards/handwired/ergocheap/config.h5
-rw-r--r--keyboards/handwired/ergocheap/info.json5
-rw-r--r--keyboards/handwired/evk/v1_3/config.h19
-rw-r--r--keyboards/handwired/evk/v1_3/info.json5
-rw-r--r--keyboards/handwired/fc200rt_qmk/config.h7
-rw-r--r--keyboards/handwired/fc200rt_qmk/info.json5
-rw-r--r--keyboards/handwired/fivethirteen/config.h17
-rw-r--r--keyboards/handwired/fivethirteen/info.json5
-rw-r--r--keyboards/handwired/floorboard/config.h17
-rw-r--r--keyboards/handwired/floorboard/info.json5
-rw-r--r--keyboards/handwired/frankie_macropad/config.h17
-rw-r--r--keyboards/handwired/frankie_macropad/info.json5
-rw-r--r--keyboards/handwired/freoduo/config.h7
-rw-r--r--keyboards/handwired/freoduo/info.json5
-rw-r--r--keyboards/handwired/fruity60/config.h9
-rw-r--r--keyboards/handwired/fruity60/info.json5
-rw-r--r--keyboards/handwired/gamenum/config.h17
-rw-r--r--keyboards/handwired/gamenum/info.json5
-rw-r--r--keyboards/handwired/hacked_motospeed/config.h21
-rw-r--r--keyboards/handwired/hacked_motospeed/info.json5
-rw-r--r--keyboards/handwired/heisenberg/config.h19
-rw-r--r--keyboards/handwired/heisenberg/info.json5
-rw-r--r--keyboards/handwired/hexon38/config.h8
-rw-r--r--keyboards/handwired/hexon38/info.json5
-rw-r--r--keyboards/handwired/hnah108/config.h17
-rw-r--r--keyboards/handwired/hnah108/info.json5
-rw-r--r--keyboards/handwired/hnah40/config.h20
-rw-r--r--keyboards/handwired/hnah40/info.json5
-rw-r--r--keyboards/handwired/hnah40rgb/config.h19
-rw-r--r--keyboards/handwired/hnah40rgb/info.json5
-rw-r--r--keyboards/handwired/hwpm87/config.h20
-rw-r--r--keyboards/handwired/hwpm87/info.json5
-rw-r--r--keyboards/handwired/ibm122m/config.h17
-rw-r--r--keyboards/handwired/ibm122m/info.json5
-rw-r--r--keyboards/handwired/ibm_wheelwriter/config.h37
-rw-r--r--keyboards/handwired/ibm_wheelwriter/info.json5
-rw-r--r--keyboards/handwired/jn68m/config.h8
-rw-r--r--keyboards/handwired/jn68m/info.json5
-rw-r--r--keyboards/handwired/jopr/config.h8
-rw-r--r--keyboards/handwired/jopr/info.json5
-rw-r--r--keyboards/handwired/jot50/config.h8
-rw-r--r--keyboards/handwired/jot50/info.json5
-rw-r--r--keyboards/handwired/jotanck/config.h8
-rw-r--r--keyboards/handwired/jotanck/info.json5
-rw-r--r--keyboards/handwired/jotpad16/config.h8
-rw-r--r--keyboards/handwired/jotpad16/info.json5
-rw-r--r--keyboards/handwired/jtallbean/split_65/config.h19
-rw-r--r--keyboards/handwired/jtallbean/split_65/info.json13
-rw-r--r--keyboards/handwired/juliet/config.h20
-rw-r--r--keyboards/handwired/juliet/info.json5
-rw-r--r--keyboards/handwired/k8split/config.h35
-rw-r--r--keyboards/handwired/k8split/info.json5
-rw-r--r--keyboards/handwired/k_numpad17/config.h8
-rw-r--r--keyboards/handwired/k_numpad17/info.json5
-rw-r--r--keyboards/handwired/kbod/config.h6
-rw-r--r--keyboards/handwired/kbod/info.json5
-rw-r--r--keyboards/handwired/ks63/config.h7
-rw-r--r--keyboards/handwired/ks63/info.json5
-rw-r--r--keyboards/handwired/lagrange/config.h9
-rw-r--r--keyboards/handwired/lagrange/info.json13
-rw-r--r--keyboards/handwired/leftynumpad/config.h17
-rw-r--r--keyboards/handwired/leftynumpad/info.json5
-rw-r--r--keyboards/handwired/lovelive9/config.h7
-rw-r--r--keyboards/handwired/lovelive9/info.json5
-rw-r--r--keyboards/handwired/m40/5x5_macropad/config.h17
-rw-r--r--keyboards/handwired/m40/5x5_macropad/info.json5
-rw-r--r--keyboards/handwired/macroboard/config.h14
-rw-r--r--keyboards/handwired/macroboard/f401/config.h22
-rw-r--r--keyboards/handwired/macroboard/f401/info.json5
-rw-r--r--keyboards/handwired/macroboard/f411/config.h4
-rw-r--r--keyboards/handwired/macroboard/f411/info.json5
-rw-r--r--keyboards/handwired/magicforce61/config.h17
-rw-r--r--keyboards/handwired/magicforce61/info.json5
-rw-r--r--keyboards/handwired/magicforce68/config.h17
-rw-r--r--keyboards/handwired/magicforce68/info.json5
-rw-r--r--keyboards/handwired/marauder/config.h14
-rw-r--r--keyboards/handwired/marauder/info.json5
-rw-r--r--keyboards/handwired/mechboards_micropad/config.h17
-rw-r--r--keyboards/handwired/mechboards_micropad/info.json5
-rw-r--r--keyboards/handwired/meck_tkl/blackpill_f401/config.h9
-rw-r--r--keyboards/handwired/meck_tkl/blackpill_f401/info.json5
-rw-r--r--keyboards/handwired/meck_tkl/config.h15
-rw-r--r--keyboards/handwired/minorca/config.h8
-rw-r--r--keyboards/handwired/minorca/info.json5
-rw-r--r--keyboards/handwired/ms_sculpt_mobile/astar/config.h4
-rw-r--r--keyboards/handwired/ms_sculpt_mobile/astar/info.json5
-rw-r--r--keyboards/handwired/ms_sculpt_mobile/config.h38
-rw-r--r--keyboards/handwired/ms_sculpt_mobile/teensy2pp/config.h4
-rw-r--r--keyboards/handwired/ms_sculpt_mobile/teensy2pp/info.json5
-rw-r--r--keyboards/handwired/mutepad/config.h19
-rw-r--r--keyboards/handwired/mutepad/info.json5
-rw-r--r--keyboards/handwired/myskeeb/config.h7
-rw-r--r--keyboards/handwired/myskeeb/info.json12
-rw-r--r--keyboards/handwired/nicekey/config.h6
-rw-r--r--keyboards/handwired/nicekey/info.json5
-rw-r--r--keyboards/handwired/not_so_minidox/config.h8
-rw-r--r--keyboards/handwired/not_so_minidox/info.json5
-rw-r--r--keyboards/handwired/novem/config.h17
-rw-r--r--keyboards/handwired/novem/info.json5
-rw-r--r--keyboards/handwired/nozbe_macro/config.h10
-rw-r--r--keyboards/handwired/nozbe_macro/info.json5
-rw-r--r--keyboards/handwired/numpad20/config.h17
-rw-r--r--keyboards/handwired/numpad20/info.json5
-rw-r--r--keyboards/handwired/obuwunkunubi/spaget/config.h9
-rw-r--r--keyboards/handwired/obuwunkunubi/spaget/info.json5
-rw-r--r--keyboards/handwired/oem_ansi_fullsize/config.h24
-rw-r--r--keyboards/handwired/oem_ansi_fullsize/info.json5
-rw-r--r--keyboards/handwired/oem_iso_fullsize/config.h37
-rw-r--r--keyboards/handwired/oem_iso_fullsize/info.json5
-rw-r--r--keyboards/handwired/ortho5x13/config.h17
-rw-r--r--keyboards/handwired/ortho5x13/info.json5
-rw-r--r--keyboards/handwired/ortho5x14/config.h17
-rw-r--r--keyboards/handwired/ortho5x14/info.json5
-rw-r--r--keyboards/handwired/ortho_brass/config.h27
-rw-r--r--keyboards/handwired/ortho_brass/info.json5
-rw-r--r--keyboards/handwired/p65rgb/config.h8
-rw-r--r--keyboards/handwired/p65rgb/info.json5
-rw-r--r--keyboards/handwired/pilcrow/config.h17
-rw-r--r--keyboards/handwired/pilcrow/info.json5
-rw-r--r--keyboards/handwired/pill60/blackpill_f401/config.h22
-rw-r--r--keyboards/handwired/pill60/blackpill_f401/info.json5
-rw-r--r--keyboards/handwired/pill60/blackpill_f411/config.h22
-rw-r--r--keyboards/handwired/pill60/blackpill_f411/info.json5
-rw-r--r--keyboards/handwired/pill60/bluepill/config.h22
-rw-r--r--keyboards/handwired/pill60/bluepill/info.json5
-rw-r--r--keyboards/handwired/pill60/config.h3
-rw-r--r--keyboards/handwired/postageboard/mini/config.h17
-rw-r--r--keyboards/handwired/postageboard/mini/info.json5
-rw-r--r--keyboards/handwired/postageboard/r1/config.h17
-rw-r--r--keyboards/handwired/postageboard/r1/info.json5
-rw-r--r--keyboards/handwired/prime_exl/config.h8
-rw-r--r--keyboards/handwired/prime_exl/info.json5
-rw-r--r--keyboards/handwired/prime_exl_plus/config.h8
-rw-r--r--keyboards/handwired/prime_exl_plus/info.json5
-rw-r--r--keyboards/handwired/prkl30/feather/config.h6
-rw-r--r--keyboards/handwired/prkl30/feather/info.json5
-rw-r--r--keyboards/handwired/prkl30/promicro/config.h6
-rw-r--r--keyboards/handwired/prkl30/promicro/info.json5
-rw-r--r--keyboards/handwired/pteron/config.h9
-rw-r--r--keyboards/handwired/pteron/info.json5
-rw-r--r--keyboards/handwired/pteron38/config.h25
-rw-r--r--keyboards/handwired/pteron38/info.json5
-rw-r--r--keyboards/handwired/pteron44/config.h25
-rw-r--r--keyboards/handwired/pteron44/info.json5
-rw-r--r--keyboards/handwired/qc60/config.h1
-rw-r--r--keyboards/handwired/qc60/info.json5
-rw-r--r--keyboards/handwired/qc60/proto/config.h6
-rw-r--r--keyboards/handwired/retro_refit/config.h8
-rw-r--r--keyboards/handwired/retro_refit/info.json5
-rw-r--r--keyboards/handwired/riblee_f401/config.h6
-rw-r--r--keyboards/handwired/riblee_f401/info.json5
-rw-r--r--keyboards/handwired/riblee_f411/config.h6
-rw-r--r--keyboards/handwired/riblee_f411/info.json5
-rw-r--r--keyboards/handwired/rs60/config.h7
-rw-r--r--keyboards/handwired/rs60/info.json5
-rw-r--r--keyboards/handwired/selene/config.h7
-rw-r--r--keyboards/handwired/selene/info.json5
-rw-r--r--keyboards/handwired/sick68/config.h19
-rw-r--r--keyboards/handwired/sick68/info.json5
-rw-r--r--keyboards/handwired/sick_pad/config.h8
-rw-r--r--keyboards/handwired/sick_pad/info.json5
-rw-r--r--keyboards/handwired/skakunm_dactyl/config.h7
-rw-r--r--keyboards/handwired/skakunm_dactyl/info.json5
-rw-r--r--keyboards/handwired/slash/config.h16
-rw-r--r--keyboards/handwired/slash/info.json5
-rw-r--r--keyboards/handwired/snatchpad/config.h17
-rw-r--r--keyboards/handwired/snatchpad/info.json5
-rw-r--r--keyboards/handwired/sono1/config.h4
-rw-r--r--keyboards/handwired/sono1/stm32f103/config.h4
-rw-r--r--keyboards/handwired/sono1/stm32f103/info.json5
-rw-r--r--keyboards/handwired/sono1/t2pp/config.h4
-rw-r--r--keyboards/handwired/sono1/t2pp/info.json5
-rw-r--r--keyboards/handwired/space_oddity/config.h7
-rw-r--r--keyboards/handwired/space_oddity/info.json5
-rw-r--r--keyboards/handwired/split65/promicro/config.h8
-rw-r--r--keyboards/handwired/split65/promicro/info.json5
-rw-r--r--keyboards/handwired/split65/stm32/config.h6
-rw-r--r--keyboards/handwired/split65/stm32/info.json5
-rw-r--r--keyboards/handwired/split89/config.h22
-rw-r--r--keyboards/handwired/split89/info.json13
-rw-r--r--keyboards/handwired/splittest/bluepill/config.h5
-rw-r--r--keyboards/handwired/splittest/bluepill/info.json5
-rw-r--r--keyboards/handwired/splittest/config.h3
-rw-r--r--keyboards/handwired/splittest/promicro/config.h3
-rw-r--r--keyboards/handwired/splittest/promicro/info.json5
-rw-r--r--keyboards/handwired/splittest/teensy_2/config.h3
-rw-r--r--keyboards/handwired/splittest/teensy_2/info.json5
-rw-r--r--keyboards/handwired/steamvan/rev1/config.h9
-rw-r--r--keyboards/handwired/steamvan/rev1/info.json5
-rw-r--r--keyboards/handwired/stef9998/split_5x7/info.json13
-rw-r--r--keyboards/handwired/stef9998/split_5x7/rev1/config.h45
-rw-r--r--keyboards/handwired/sticc14/config.h17
-rw-r--r--keyboards/handwired/sticc14/info.json5
-rw-r--r--keyboards/handwired/swiftrax/astro65/config.h29
-rw-r--r--keyboards/handwired/swiftrax/astro65/info.json5
-rw-r--r--keyboards/handwired/swiftrax/bebol/config.h27
-rw-r--r--keyboards/handwired/swiftrax/bebol/info.json5
-rw-r--r--keyboards/handwired/swiftrax/beegboy/config.h10
-rw-r--r--keyboards/handwired/swiftrax/beegboy/info.json5
-rw-r--r--keyboards/handwired/swiftrax/bumblebee/config.h8
-rw-r--r--keyboards/handwired/swiftrax/bumblebee/info.json5
-rw-r--r--keyboards/handwired/swiftrax/cowfish/config.h9
-rw-r--r--keyboards/handwired/swiftrax/cowfish/info.json5
-rw-r--r--keyboards/handwired/swiftrax/digicarp65/config.h27
-rw-r--r--keyboards/handwired/swiftrax/digicarp65/info.json5
-rw-r--r--keyboards/handwired/swiftrax/digicarpice/config.h27
-rw-r--r--keyboards/handwired/swiftrax/digicarpice/info.json5
-rw-r--r--keyboards/handwired/swiftrax/equator/config.h27
-rw-r--r--keyboards/handwired/swiftrax/equator/info.json5
-rw-r--r--keyboards/handwired/swiftrax/glacier/config.h9
-rw-r--r--keyboards/handwired/swiftrax/glacier/info.json5
-rw-r--r--keyboards/handwired/swiftrax/joypad/config.h9
-rw-r--r--keyboards/handwired/swiftrax/joypad/info.json5
-rw-r--r--keyboards/handwired/swiftrax/koalafications/config.h9
-rw-r--r--keyboards/handwired/swiftrax/koalafications/info.json5
-rw-r--r--keyboards/handwired/swiftrax/nodu/config.h9
-rw-r--r--keyboards/handwired/swiftrax/nodu/info.json5
-rw-r--r--keyboards/handwired/swiftrax/pandamic/config.h9
-rw-r--r--keyboards/handwired/swiftrax/pandamic/info.json5
-rw-r--r--keyboards/handwired/swiftrax/the_galleon/config.h10
-rw-r--r--keyboards/handwired/swiftrax/the_galleon/info.json5
-rw-r--r--keyboards/handwired/swiftrax/unsplit/config.h27
-rw-r--r--keyboards/handwired/swiftrax/unsplit/info.json5
-rw-r--r--keyboards/handwired/swiftrax/walter/config.h9
-rw-r--r--keyboards/handwired/swiftrax/walter/info.json5
-rw-r--r--keyboards/handwired/symmetry60/config.h17
-rw-r--r--keyboards/handwired/symmetry60/info.json5
-rw-r--r--keyboards/handwired/t111/config.h44
-rw-r--r--keyboards/handwired/t111/info.json5
-rw-r--r--keyboards/handwired/tennie/config.h17
-rw-r--r--keyboards/handwired/tennie/info.json5
-rw-r--r--keyboards/handwired/terminus_mini/config.h17
-rw-r--r--keyboards/handwired/terminus_mini/info.json5
-rw-r--r--keyboards/handwired/trackpoint/config.h6
-rw-r--r--keyboards/handwired/trackpoint/info.json5
-rw-r--r--keyboards/handwired/tractyl_manuform/4x6_right/config.h7
-rw-r--r--keyboards/handwired/tractyl_manuform/4x6_right/info.json5
-rw-r--r--keyboards/handwired/tractyl_manuform/5x6_right/arduinomicro/config.h10
-rw-r--r--keyboards/handwired/tractyl_manuform/5x6_right/arduinomicro/info.json13
-rw-r--r--keyboards/handwired/tractyl_manuform/5x6_right/elite_c/config.h8
-rw-r--r--keyboards/handwired/tractyl_manuform/5x6_right/elite_c/info.json5
-rw-r--r--keyboards/handwired/tractyl_manuform/5x6_right/f303/config.h11
-rw-r--r--keyboards/handwired/tractyl_manuform/5x6_right/f303/info.json5
-rw-r--r--keyboards/handwired/tractyl_manuform/5x6_right/f411/config.h8
-rw-r--r--keyboards/handwired/tractyl_manuform/5x6_right/f411/info.json5
-rw-r--r--keyboards/handwired/tractyl_manuform/5x6_right/teensy2pp/config.h8
-rw-r--r--keyboards/handwired/tractyl_manuform/5x6_right/teensy2pp/info.json5
-rw-r--r--keyboards/handwired/traveller/config.h17
-rw-r--r--keyboards/handwired/traveller/info.json5
-rw-r--r--keyboards/handwired/tritium_numpad/config.h9
-rw-r--r--keyboards/handwired/tritium_numpad/info.json5
-rw-r--r--keyboards/handwired/twadlee/tp69/config.h20
-rw-r--r--keyboards/handwired/twadlee/tp69/info.json5
-rw-r--r--keyboards/handwired/twig/twig50/config.h6
-rw-r--r--keyboards/handwired/twig/twig50/info.json5
-rw-r--r--keyboards/handwired/unicomp_mini_m/config.h17
-rw-r--r--keyboards/handwired/unicomp_mini_m/info.json5
-rw-r--r--keyboards/handwired/unk/rev1/config.h10
-rw-r--r--keyboards/handwired/unk/rev1/info.json13
-rw-r--r--keyboards/handwired/uthol/config.h21
-rw-r--r--keyboards/handwired/uthol/rev1/config.h23
-rw-r--r--keyboards/handwired/uthol/rev1/info.json5
-rw-r--r--keyboards/handwired/uthol/rev2/config.h5
-rw-r--r--keyboards/handwired/uthol/rev2/info.json5
-rw-r--r--keyboards/handwired/uthol/rev3/config.h8
-rw-r--r--keyboards/handwired/uthol/rev3/info.json5
-rw-r--r--keyboards/handwired/videowriter/config.h17
-rw-r--r--keyboards/handwired/videowriter/info.json5
-rw-r--r--keyboards/handwired/wabi/config.h19
-rw-r--r--keyboards/handwired/wabi/info.json5
-rw-r--r--keyboards/handwired/woodpad/config.h17
-rw-r--r--keyboards/handwired/woodpad/info.json5
-rw-r--r--keyboards/handwired/wulkan/config.h6
-rw-r--r--keyboards/handwired/wulkan/info.json5
-rw-r--r--keyboards/handwired/xealous/config.h3
-rw-r--r--keyboards/handwired/xealous/rev1/config.h22
-rw-r--r--keyboards/handwired/xealous/rev1/info.json5
-rw-r--r--keyboards/handwired/z150/config.h7
-rw-r--r--keyboards/handwired/z150/info.json5
-rw-r--r--keyboards/handwired/zergo/config.h26
-rw-r--r--keyboards/handwired/zergo/info.json5
702 files changed, 1779 insertions, 5015 deletions
diff --git a/keyboards/cablecardesigns/cypher/rev6/config.h b/keyboards/cablecardesigns/cypher/rev6/config.h
index dc8c82f7b0..8b17e3e199 100644
--- a/keyboards/cablecardesigns/cypher/rev6/config.h
+++ b/keyboards/cablecardesigns/cypher/rev6/config.h
@@ -2,13 +2,6 @@
// SPDX-License-Identifier: GPL-2.0-or-later
#pragma once
-
-#define MATRIX_ROW_PINS { B0, F1, F5, F6, F7, D1, F4, D4, C6, C7 }
-#define MATRIX_COL_PINS { D6, D7, B4, B5, B6, B7, B3, B2, B1, F0 }
-
-/* COL2ROW, ROW2COL, or CUSTOM_MATRIX */
-#define DIODE_DIRECTION COL2ROW
-
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
#define LOCKING_SUPPORT_ENABLE
/* Locking resynchronize hack */
diff --git a/keyboards/cablecardesigns/cypher/rev6/info.json b/keyboards/cablecardesigns/cypher/rev6/info.json
index 4fc447236e..0e8006486c 100644
--- a/keyboards/cablecardesigns/cypher/rev6/info.json
+++ b/keyboards/cablecardesigns/cypher/rev6/info.json
@@ -6,6 +6,11 @@
"pid": "0xAA99",
"device_version": "0.0.2"
},
+ "matrix_pins": {
+ "cols": ["D6", "D7", "B4", "B5", "B6", "B7", "B3", "B2", "B1", "F0"],
+ "rows": ["B0", "F1", "F5", "F6", "F7", "D1", "F4", "D4", "C6", "C7"]
+ },
+ "diode_direction": "COL2ROW",
"backlight": {
"pin": "D0",
"levels": 5,
diff --git a/keyboards/caffeinated/serpent65/config.h b/keyboards/caffeinated/serpent65/config.h
index cd974173a1..bb14ae71b1 100644
--- a/keyboards/caffeinated/serpent65/config.h
+++ b/keyboards/caffeinated/serpent65/config.h
@@ -17,29 +17,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
#pragma once
-
-/*
- * Keyboard Matrix Assignments
- *
- * Change this to how you wired your keyboard
- * COLS: AVR pins used for columns, left to right
- * ROWS: AVR pins used for rows, top to bottom
- * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
- * ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
- *
-*/
-#define MATRIX_ROW_PINS {B11, B10, B2, B1, B0, A7, A6, A5, B13, B12}
-#define MATRIX_COL_PINS {A1, A2, A3, A4, B14, B15, A8, A9}
-//{C13, C14, C15, A0,A2,A3,A4,A5,A6, A1,B12,B1}
-/* Unused pins, in the default layout, are:
-EncA (B6) because it is not used in the default PCB
-All Extra pins (A8, B15, B14, B13, B3, B5, B8, B9) , for the same reason;
-B0, which is unconnected on the PCB
-*/
-
-/* COL2ROW, ROW2COL*/
-#define DIODE_DIRECTION COL2ROW
-
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
#define LOCKING_SUPPORT_ENABLE
/* Locking resynchronize hack */
diff --git a/keyboards/caffeinated/serpent65/info.json b/keyboards/caffeinated/serpent65/info.json
index de52e1776e..f2e0c2b4d5 100644
--- a/keyboards/caffeinated/serpent65/info.json
+++ b/keyboards/caffeinated/serpent65/info.json
@@ -8,6 +8,11 @@
"pid": "0x6501",
"device_version": "0.0.1"
},
+ "matrix_pins": {
+ "cols": ["A1", "A2", "A3", "A4", "B14", "B15", "A8", "A9"],
+ "rows": ["B11", "B10", "B2", "B1", "B0", "A7", "A6", "A5", "B13", "B12"]
+ },
+ "diode_direction": "COL2ROW",
"processor": "STM32F072",
"bootloader": "stm32-dfu",
"layouts": {
diff --git a/keyboards/canary/canary60rgb/info.json b/keyboards/canary/canary60rgb/info.json
index 069d812665..55e0ea0c56 100644
--- a/keyboards/canary/canary60rgb/info.json
+++ b/keyboards/canary/canary60rgb/info.json
@@ -8,6 +8,11 @@
"pid": "0x0621",
"device_version": "0.0.1"
},
+ "matrix_pins": {
+ "cols": ["C7", "F7", "F6", "F0", "B0", "B1", "B4", "D7", "D6", "D4", "D5", "D3", "D2", "B7"],
+ "rows": ["F5", "F4", "F1", "B3", "B2"]
+ },
+ "diode_direction": "COL2ROW",
"processor": "atmega32u4",
"bootloader": "atmel-dfu",
"layouts": {
diff --git a/keyboards/canary/canary60rgb/v1/config.h b/keyboards/canary/canary60rgb/v1/config.h
index 757db92403..999ec9f108 100644
--- a/keyboards/canary/canary60rgb/v1/config.h
+++ b/keyboards/canary/canary60rgb/v1/config.h
@@ -15,22 +15,6 @@
*/
#pragma once
-/*
- * Keyboard Matrix Assignments
- *
- * Change this to how you wired your keyboard
- * COLS: AVR pins used for columns, left to right
- * ROWS: AVR pins used for rows, top to bottom
- * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
- * ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
- *
- */
-#define MATRIX_ROW_PINS { F5, F4, F1, B3, B2 }
-#define MATRIX_COL_PINS { C7, F7, F6, F0, B0, B1, B4, D7, D6, D4, D5, D3, D2, B7 }
-
-/* COL2ROW, ROW2COL*/
-#define DIODE_DIRECTION COL2ROW
-
#define RGB_DI_PIN B6
#ifdef RGB_DI_PIN
# define RGBLIGHT_EFFECT_BREATHING
diff --git a/keyboards/cannonkeys/adelie/config.h b/keyboards/cannonkeys/adelie/config.h
index e5f6cbedab..59f438cfca 100644
--- a/keyboards/cannonkeys/adelie/config.h
+++ b/keyboards/cannonkeys/adelie/config.h
@@ -17,23 +17,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
#pragma once
-
-/*
- * Keyboard Matrix Assignments
- *
- * Change this to how you wired your keyboard
- * COLS: AVR pins used for columns, left to right
- * ROWS: AVR pins used for rows, top to bottom
- * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
- * ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
- *
- */
-#define MATRIX_ROW_PINS { F4, F1, B1, B0 }
-#define MATRIX_COL_PINS { F5, F6, F7, C7, C6, B6, B5, B4, D7, D6, D4, D5, D3, D2, B2 }
-
-/* COL2ROW, ROW2COL*/
-#define DIODE_DIRECTION COL2ROW
-
#define RGB_DI_PIN F0
#ifdef RGB_DI_PIN
#define RGBLED_NUM 3
diff --git a/keyboards/cannonkeys/adelie/info.json b/keyboards/cannonkeys/adelie/info.json
index d075dc199a..5dd8a27b23 100644
--- a/keyboards/cannonkeys/adelie/info.json
+++ b/keyboards/cannonkeys/adelie/info.json
@@ -8,6 +8,11 @@
"pid": "0x0005",
"device_version": "0.0.1"
},
+ "matrix_pins": {
+ "cols": ["F5", "F6", "F7", "C7", "C6", "B6", "B5", "B4", "D7", "D6", "D4", "D5", "D3", "D2", "B2"],
+ "rows": ["F4", "F1", "B1", "B0"]
+ },
+ "diode_direction": "COL2ROW",
"processor": "atmega32u4",
"bootloader": "atmel-dfu",
"layouts": {
diff --git a/keyboards/cannonkeys/aella/config.h b/keyboards/cannonkeys/aella/config.h
index a03a1f3fb8..4b007cf387 100644
--- a/keyboards/cannonkeys/aella/config.h
+++ b/keyboards/cannonkeys/aella/config.h
@@ -17,10 +17,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
#pragma once
-#define MATRIX_COL_PINS { A5, B0, B1, B2, B10, A9, C13, B9, B8, B7, B6, B5, B4, B3, A15, A14 }
-#define MATRIX_ROW_PINS { A13, B12, B11, B14, A8, A7 }
-#define DIODE_DIRECTION COL2ROW
-
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
#define LOCKING_SUPPORT_ENABLE
/* Locking resynchronize hack */
diff --git a/keyboards/cannonkeys/aella/info.json b/keyboards/cannonkeys/aella/info.json
index 1fc2da7d64..be8335bfd3 100644
--- a/keyboards/cannonkeys/aella/info.json
+++ b/keyboards/cannonkeys/aella/info.json
@@ -8,6 +8,11 @@
"pid": "0x0007",
"device_version": "0.0.1"
},
+ "matrix_pins": {
+ "cols": ["A5", "B0", "B1", "B2", "B10", "A9", "C13", "B9", "B8", "B7", "B6", "B5", "B4", "B3", "A15", "A14"],
+ "rows": ["A13", "B12", "B11", "B14", "A8", "A7"]
+ },
+ "diode_direction": "COL2ROW",
"processor": "STM32F072",
"bootloader": "stm32-dfu",
"layouts": {
diff --git a/keyboards/cannonkeys/an_c/config.h b/keyboards/cannonkeys/an_c/config.h
index a6b9872268..3120b3167a 100644
--- a/keyboards/cannonkeys/an_c/config.h
+++ b/keyboards/cannonkeys/an_c/config.h
@@ -17,10 +17,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
#pragma once
-#define MATRIX_COL_PINS { B11, B10, B2, A9, A15, B3, B4, B5, B6, B7, B8, B9, C13, C14, C15 }
-#define MATRIX_ROW_PINS { B1, B0, A7, A5, A4 }
-#define DIODE_DIRECTION COL2ROW
-
#define BACKLIGHT_PWM_DRIVER PWMD3
#define BACKLIGHT_PWM_CHANNEL 1
#define BACKLIGHT_PAL_MODE 1
diff --git a/keyboards/cannonkeys/an_c/info.json b/keyboards/cannonkeys/an_c/info.json
index 0517bb09d3..25b2ce528c 100644
--- a/keyboards/cannonkeys/an_c/info.json
+++ b/keyboards/cannonkeys/an_c/info.json
@@ -8,6 +8,11 @@
"pid": "0xA00C",
"device_version": "0.0.1"
},
+ "matrix_pins": {
+ "cols": ["B11", "B10", "B2", "A9", "A15", "B3", "B4", "B5", "B6", "B7", "B8", "B9", "C13", "C14", "C15"],
+ "rows": ["B1", "B0", "A7", "A5", "A4"]
+ },
+ "diode_direction": "COL2ROW",
"backlight": {
"pin": "A6",
"levels": 6,
diff --git a/keyboards/cannonkeys/atlas/config.h b/keyboards/cannonkeys/atlas/config.h
index 9689ba3d22..0ff5f383bb 100644
--- a/keyboards/cannonkeys/atlas/config.h
+++ b/keyboards/cannonkeys/atlas/config.h
@@ -17,10 +17,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
#pragma once
-#define MATRIX_COL_PINS { A2, A1, A0, F1, F0, C15, C14, C13, B9, A15, A10, A9 }
-#define MATRIX_ROW_PINS { A8, B14, B12, B4, B3 }
-#define DIODE_DIRECTION COL2ROW
-
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
#define LOCKING_SUPPORT_ENABLE
/* Locking resynchronize hack */
diff --git a/keyboards/cannonkeys/atlas/info.json b/keyboards/cannonkeys/atlas/info.json
index fbc4e94d83..c3132a7780 100644
--- a/keyboards/cannonkeys/atlas/info.json
+++ b/keyboards/cannonkeys/atlas/info.json
@@ -8,6 +8,11 @@
"pid": "0xA7A5",
"device_version": "0.0.1"
},
+ "matrix_pins": {
+ "cols": ["A2", "A1", "A0", "F1", "F0", "C15", "C14", "C13", "B9", "A15", "A10", "A9"],
+ "rows": ["A8", "B14", "B12", "B4", "B3"]
+ },
+ "diode_direction": "COL2ROW",
"processor": "STM32F072",
"bootloader": "stm32-dfu",
"layouts": {
diff --git a/keyboards/cannonkeys/atlas_alps/config.h b/keyboards/cannonkeys/atlas_alps/config.h
index 9adbb67a2f..52b15c350c 100644
--- a/keyboards/cannonkeys/atlas_alps/config.h
+++ b/keyboards/cannonkeys/atlas_alps/config.h
@@ -16,15 +16,6 @@
#pragma once
-
-/* key matrix pins */
-#define MATRIX_ROW_PINS { B5, B4, D1, D7, D6 }
-#define MATRIX_COL_PINS { B6, C6, D2, E6, C7, B3, F7, F6, F5, F4, F1, F0 }
-
-
-/* COL2ROW or ROW2COL */
-#define DIODE_DIRECTION COL2ROW
-
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
#define LOCKING_SUPPORT_ENABLE
diff --git a/keyboards/cannonkeys/atlas_alps/info.json b/keyboards/cannonkeys/atlas_alps/info.json
index e1831be72a..ee7c94c0ad 100644
--- a/keyboards/cannonkeys/atlas_alps/info.json
+++ b/keyboards/cannonkeys/atlas_alps/info.json
@@ -8,6 +8,11 @@
"pid": "0xA7A5",
"device_version": "0.1.0"
},
+ "matrix_pins": {
+ "cols": ["B6", "C6", "D2", "E6", "C7", "B3", "F7", "F6", "F5", "F4", "F1", "F0"],
+ "rows": ["B5", "B4", "D1", "D7", "D6"]
+ },
+ "diode_direction": "COL2ROW",
"processor": "atmega32u4",
"bootloader": "atmel-dfu",
"community_layouts": ["ortho_5x12"],
diff --git a/keyboards/cannonkeys/balance/config.h b/keyboards/cannonkeys/balance/config.h
index 5d93b09a27..f9c629dad8 100644
--- a/keyboards/cannonkeys/balance/config.h
+++ b/keyboards/cannonkeys/balance/config.h
@@ -17,10 +17,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
#pragma once
-#define MATRIX_COL_PINS { B11, B10, B2, B1, B0, A7, A6, A5, A4, A3, A2, A1, F1, C15, B3, C14, C13, B9, B8, B7 }
-#define MATRIX_ROW_PINS { B4, A15, A14, A0, F0 }
-#define DIODE_DIRECTION COL2ROW
-
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
#define LOCKING_SUPPORT_ENABLE
/* Locking resynchronize hack */
diff --git a/keyboards/cannonkeys/balance/info.json b/keyboards/cannonkeys/balance/info.json
index b9844e5295..7a1db4a0ec 100644
--- a/keyboards/cannonkeys/balance/info.json
+++ b/keyboards/cannonkeys/balance/info.json
@@ -8,6 +8,11 @@
"pid": "0xBA77",
"device_version": "0.0.1"
},
+ "matrix_pins": {
+ "cols": ["B11", "B10", "B2", "B1", "B0", "A7", "A6", "A5", "A4", "A3", "A2", "A1", "F1", "C15", "B3", "C14", "C13", "B9", "B8", "B7"],
+ "rows": ["B4", "A15", "A14", "A0", "F0"]
+ },
+ "diode_direction": "COL2ROW",
"encoder": {
"rotary": [
{"pin_a": "B5", "pin_b": "B6", "resolution": 2}
diff --git a/keyboards/cannonkeys/brutalv2_65/config.h b/keyboards/cannonkeys/brutalv2_65/config.h
index 14b14879d6..ae9c049bc1 100644
--- a/keyboards/cannonkeys/brutalv2_65/config.h
+++ b/keyboards/cannonkeys/brutalv2_65/config.h
@@ -17,10 +17,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
#pragma once
-#define MATRIX_COL_PINS { C13, C15, B13, B12, B11, B10, B2, B1, B0, A7, A6, A5, A4, A3, A2 }
-#define MATRIX_ROW_PINS { C14, A1, B14, B15, A8 }
-#define DIODE_DIRECTION COL2ROW
-
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
#define LOCKING_SUPPORT_ENABLE
/* Locking resynchronize hack */
diff --git a/keyboards/cannonkeys/brutalv2_65/info.json b/keyboards/cannonkeys/brutalv2_65/info.json
index 000e541557..699b31fea2 100644
--- a/keyboards/cannonkeys/brutalv2_65/info.json
+++ b/keyboards/cannonkeys/brutalv2_65/info.json
@@ -8,6 +8,11 @@
"pid": "0x0008",
"device_version": "0.0.1"
},
+ "matrix_pins": {
+ "cols": ["C13", "C15", "B13", "B12", "B11", "B10", "B2", "B1", "B0", "A7", "A6", "A5", "A4", "A3", "A2"],
+ "rows": ["C14", "A1", "B14", "B15", "A8"]
+ },
+ "diode_direction": "COL2ROW",
"indicators": {
"caps_lock": "B3",
"on_state": 0
diff --git a/keyboards/cannonkeys/chimera65/config.h b/keyboards/cannonkeys/chimera65/config.h
index 26e04106ab..a47b76953a 100644
--- a/keyboards/cannonkeys/chimera65/config.h
+++ b/keyboards/cannonkeys/chimera65/config.h
@@ -17,10 +17,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
#pragma once
-#define MATRIX_COL_PINS { B11, B10, B2, B1, A5, A4, A3, A2, A1, F0, C15, C14, A9, A8, A10, B3 }
-#define MATRIX_ROW_PINS { A13, A14, A15, C13, B8 }
-#define DIODE_DIRECTION COL2ROW
-
#define BACKLIGHT_PWM_DRIVER PWMD3
#define BACKLIGHT_PWM_CHANNEL 1
#define BACKLIGHT_PAL_MODE 1
diff --git a/keyboards/cannonkeys/chimera65/info.json b/keyboards/cannonkeys/chimera65/info.json
index cdd07c3459..e5b30d6ea3 100644
--- a/keyboards/cannonkeys/chimera65/info.json
+++ b/keyboards/cannonkeys/chimera65/info.json
@@ -8,6 +8,11 @@
"pid": "0xC024",
"device_version": "0.0.1"
},
+ "matrix_pins": {
+ "cols": ["B11", "B10", "B2", "B1", "A5", "A4", "A3", "A2", "A1", "F0", "C15", "C14", "A9", "A8", "A10", "B3"],
+ "rows": ["A13", "A14", "A15", "C13", "B8"]
+ },
+ "diode_direction": "COL2ROW",
"backlight": {
"pin": "A6",
"levels": 6,
diff --git a/keyboards/cannonkeys/cloudline/config.h b/keyboards/cannonkeys/cloudline/config.h
index d7c7052163..8826d5568a 100644
--- a/keyboards/cannonkeys/cloudline/config.h
+++ b/keyboards/cannonkeys/cloudline/config.h
@@ -3,10 +3,6 @@
#pragma once
-#define MATRIX_COL_PINS { B1, B2, B10, B11, B12, B14, A8, A9, A10, A3, B0, A2, A1, A7, A0, B4, B6, B7 }
-#define MATRIX_ROW_PINS { A15, B3, B5, A4, A5, F1 }
-#define DIODE_DIRECTION COL2ROW
-
#define BACKLIGHT_PWM_DRIVER PWMD3
#define BACKLIGHT_PWM_CHANNEL 1
#define BACKLIGHT_PAL_MODE 1
diff --git a/keyboards/cannonkeys/cloudline/info.json b/keyboards/cannonkeys/cloudline/info.json
index d5d8b817ea..e6dc43ea10 100644
--- a/keyboards/cannonkeys/cloudline/info.json
+++ b/keyboards/cannonkeys/cloudline/info.json
@@ -8,6 +8,11 @@
"pid": "0x000A",
"device_version": "0.0.1"
},
+ "matrix_pins": {
+ "cols": ["B1", "B2", "B10", "B11", "B12", "B14", "A8", "A9", "A10", "A3", "B0", "A2", "A1", "A7", "A0", "B4", "B6", "B7"],
+ "rows": ["A15", "B3", "B5", "A4", "A5", "F1"]
+ },
+ "diode_direction": "COL2ROW",
"backlight": {
"pin": "A6",
"levels": 6,
diff --git a/keyboards/cannonkeys/crin/config.h b/keyboards/cannonkeys/crin/config.h
index c275e78f23..d6e974b21d 100644
--- a/keyboards/cannonkeys/crin/config.h
+++ b/keyboards/cannonkeys/crin/config.h
@@ -17,11 +17,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
#pragma once
-#define MATRIX_COL_PINS { B0, C15, C14, A7, A5, C13, A4, A2, A1, A0, B9, B8, B7, A3, B6, B4, B3, A15 }
-#define MATRIX_ROW_PINS { B11, B10, B2, F0, B5 }
-#define DIODE_DIRECTION COL2ROW
-
-
#define BACKLIGHT_PWM_DRIVER PWMD3
#define BACKLIGHT_PWM_CHANNEL 1
#define BACKLIGHT_PAL_MODE 1
diff --git a/keyboards/cannonkeys/crin/info.json b/keyboards/cannonkeys/crin/info.json
index 6c6afa0f89..0fa01b54a2 100644
--- a/keyboards/cannonkeys/crin/info.json
+++ b/keyboards/cannonkeys/crin/info.json
@@ -8,6 +8,11 @@
"pid": "0x0012",
"device_version": "0.0.1"
},
+ "matrix_pins": {
+ "cols": ["B0", "C15", "C14", "A7", "A5", "C13", "A4", "A2", "A1", "A0", "B9", "B8", "B7", "A3", "B6", "B4", "B3", "A15"],
+ "rows": ["B11", "B10", "B2", "F0", "B5"]
+ },
+ "diode_direction": "COL2ROW",
"backlight": {
"pin": "A6",
"levels": 6,
diff --git a/keyboards/cannonkeys/db60/config.h b/keyboards/cannonkeys/db60/config.h
index 9e034e7c12..1bdd8995f7 100644
--- a/keyboards/cannonkeys/db60/config.h
+++ b/keyboards/cannonkeys/db60/config.h
@@ -17,11 +17,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
#pragma once
-#define MATRIX_COL_PINS { B11, B10, B2, A9, A15, B3, B4, B5, B6, B7, B8, B9, C13, C14, C15 }
-#define MATRIX_ROW_PINS { B1, B0, A7, A5, A4 }
-#define DIODE_DIRECTION COL2ROW
-
-
#define BACKLIGHT_PWM_DRIVER PWMD3
#define BACKLIGHT_PWM_CHANNEL 1
#define BACKLIGHT_PAL_MODE 1
diff --git a/keyboards/cannonkeys/db60/info.json b/keyboards/cannonkeys/db60/info.json
index 5f4a94d367..3b1d9fc608 100644
--- a/keyboards/cannonkeys/db60/info.json
+++ b/keyboards/cannonkeys/db60/info.json
@@ -6,6 +6,11 @@
"vid": "0xCA04",
"device_version": "0.0.1"
},
+ "matrix_pins": {
+ "cols": ["B11", "B10", "B2", "A9", "A15", "B3", "B4", "B5", "B6", "B7", "B8", "B9", "C13", "C14", "C15"],
+ "rows": ["B1", "B0", "A7", "A5", "A4"]
+ },
+ "diode_direction": "COL2ROW",
"backlight": {
"pin": "A6",
"levels": 6,
diff --git a/keyboards/cannonkeys/devastatingtkl/config.h b/keyboards/cannonkeys/devastatingtkl/config.h
index cd6fa15243..ab8f8fa121 100644
--- a/keyboards/cannonkeys/devastatingtkl/config.h
+++ b/keyboards/cannonkeys/devastatingtkl/config.h
@@ -17,10 +17,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
#pragma once
-#define MATRIX_COL_PINS { B1, B2, B10, B11, B12, B14, A8, A9, A10, A3, B0, A2, A1, A7, A0, B4, B6, B7 }
-#define MATRIX_ROW_PINS { A15, B3, B5, A4, A5, F1 }
-#define DIODE_DIRECTION COL2ROW
-
#define BACKLIGHT_PWM_DRIVER PWMD3
#define BACKLIGHT_PWM_CHANNEL 1
#define BACKLIGHT_PAL_MODE 1
diff --git a/keyboards/cannonkeys/devastatingtkl/info.json b/keyboards/cannonkeys/devastatingtkl/info.json
index 557b53817b..58c46c21ac 100644
--- a/keyboards/cannonkeys/devastatingtkl/info.json
+++ b/keyboards/cannonkeys/devastatingtkl/info.json
@@ -8,6 +8,11 @@
"pid": "0xDE57",
"device_version": "0.0.1"
},
+ "matrix_pins": {
+ "cols": ["B1", "B2", "B10", "B11", "B12", "B14", "A8", "A9", "A10", "A3", "B0", "A2", "A1", "A7", "A0", "B4", "B6", "B7"],
+ "rows": ["A15", "B3", "B5", "A4", "A5", "F1"]
+ },
+ "diode_direction": "COL2ROW",
"backlight": {
"pin": "A6",
"levels": 6,
diff --git a/keyboards/cannonkeys/gentoo/config.h b/keyboards/cannonkeys/gentoo/config.h
index 14b14879d6..ae9c049bc1 100644
--- a/keyboards/cannonkeys/gentoo/config.h
+++ b/keyboards/cannonkeys/gentoo/config.h
@@ -17,10 +17,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
#pragma once
-#define MATRIX_COL_PINS { C13, C15, B13, B12, B11, B10, B2, B1, B0, A7, A6, A5, A4, A3, A2 }
-#define MATRIX_ROW_PINS { C14, A1, B14, B15, A8 }
-#define DIODE_DIRECTION COL2ROW
-
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
#define LOCKING_SUPPORT_ENABLE
/* Locking resynchronize hack */
diff --git a/keyboards/cannonkeys/gentoo/info.json b/keyboards/cannonkeys/gentoo/info.json
index 6b0c9399be..0608a560be 100644
--- a/keyboards/cannonkeys/gentoo/info.json
+++ b/keyboards/cannonkeys/gentoo/info.json
@@ -8,6 +8,11 @@
"pid": "0x000F",
"device_version": "0.0.1"
},
+ "matrix_pins": {
+ "cols": ["C13", "C15", "B13", "B12", "B11", "B10", "B2", "B1", "B0", "A7", "A6", "A5", "A4", "A3", "A2"],
+ "rows": ["C14", "A1", "B14", "B15", "A8"]
+ },
+ "diode_direction": "COL2ROW",
"indicators": {
"caps_lock": "B3",
"on_state": 0
diff --git a/keyboards/cannonkeys/gentoo_hs/config.h b/keyboards/cannonkeys/gentoo_hs/config.h
index 8c83fe3fc6..4b007cf387 100644
--- a/keyboards/cannonkeys/gentoo_hs/config.h
+++ b/keyboards/cannonkeys/gentoo_hs/config.h
@@ -17,10 +17,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
#pragma once
-#define MATRIX_COL_PINS { A8, C13, B9, B8, B7, B6, B5, B4, B3, A7, A5, A4, A3, A2, A1 }
-#define MATRIX_ROW_PINS { A14, A15, A0, B1, B0 }
-#define DIODE_DIRECTION COL2ROW
-
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
#define LOCKING_SUPPORT_ENABLE
/* Locking resynchronize hack */
diff --git a/keyboards/cannonkeys/gentoo_hs/info.json b/keyboards/cannonkeys/gentoo_hs/info.json
index 8595a321b2..f42bb88baa 100644
--- a/keyboards/cannonkeys/gentoo_hs/info.json
+++ b/keyboards/cannonkeys/gentoo_hs/info.json
@@ -8,6 +8,11 @@
"pid": "0x0010",
"device_version": "0.0.1"
},
+ "matrix_pins": {
+ "cols": ["A8", "C13", "B9", "B8", "B7", "B6", "B5", "B4", "B3", "A7", "A5", "A4", "A3", "A2", "A1"],
+ "rows": ["A14", "A15", "A0", "B1", "B0"]
+ },
+ "diode_direction": "COL2ROW",
"indicators": {
"caps_lock": "B14",
"on_state": 0
diff --git a/keyboards/cannonkeys/hoodrowg/config.h b/keyboards/cannonkeys/hoodrowg/config.h
index 103faf39f9..c4e3629964 100644
--- a/keyboards/cannonkeys/hoodrowg/config.h
+++ b/keyboards/cannonkeys/hoodrowg/config.h
@@ -17,11 +17,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
#pragma once
-
-#define MATRIX_COL_PINS { B5, B4, D7, F5, F6, F7, F4, D2, D0 }
-#define MATRIX_ROW_PINS { E6, B7, B0, B1, F1, F0, C6, C7, D4, D6, D5, D3 }
-#define DIODE_DIRECTION COL2ROW
-
#define RGB_DI_PIN D1
#define RGBLED_NUM 16
#define RGBLIGHT_EFFECT_BREATHING
diff --git a/keyboards/cannonkeys/hoodrowg/info.json b/keyboards/cannonkeys/hoodrowg/info.json
index 4d0adb731a..cd08c00354 100644
--- a/keyboards/cannonkeys/hoodrowg/info.json
+++ b/keyboards/cannonkeys/hoodrowg/info.json
@@ -8,6 +8,11 @@
"pid": "0x0006",
"device_version": "0.0.1"
},
+ "matrix_pins": {
+ "cols": ["B5", "B4", "D7", "F5", "F6", "F7", "F4", "D2", "D0"],
+ "rows": ["E6", "B7", "B0", "B1", "F1", "F0", "C6", "C7", "D4", "D6", "D5", "D3"]
+ },
+ "diode_direction": "COL2ROW",
"indicators": {
"caps_lock": "B6",
"scroll_lock": "B2"
diff --git a/keyboards/cannonkeys/instant60/config.h b/keyboards/cannonkeys/instant60/config.h
index 8e7158765d..3120b3167a 100644
--- a/keyboards/cannonkeys/instant60/config.h
+++ b/keyboards/cannonkeys/instant60/config.h
@@ -17,10 +17,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
#pragma once
-#define MATRIX_COL_PINS { B2, B10, B11, A9, A15, B3, B4, B5, B6, B7, B8, B9, C13, C14, C15 }
-#define MATRIX_ROW_PINS { B1, B0, A7, A5, A4 }
-#define DIODE_DIRECTION COL2ROW
-
#define BACKLIGHT_PWM_DRIVER PWMD3
#define BACKLIGHT_PWM_CHANNEL 1
#define BACKLIGHT_PAL_MODE 1
diff --git a/keyboards/cannonkeys/instant60/info.json b/keyboards/cannonkeys/instant60/info.json
index 56f5126d0d..f10aa02bb9 100644
--- a/keyboards/cannonkeys/instant60/info.json
+++ b/keyboards/cannonkeys/instant60/info.json
@@ -8,6 +8,11 @@
"pid": "0x1600",
"device_version": "0.0.1"
},
+ "matrix_pins": {
+ "cols": ["B2", "B10", "B11", "A9", "A15", "B3", "B4", "B5", "B6", "B7", "B8", "B9", "C13", "C14", "C15"],
+ "rows": ["B1", "B0", "A7", "A5", "A4"]
+ },
+ "diode_direction": "COL2ROW",
"backlight": {
"pin": "A6",
"levels": 6,
diff --git a/keyboards/cannonkeys/instant65/config.h b/keyboards/cannonkeys/instant65/config.h
index 5afccde3a7..898aff0ff5 100644
--- a/keyboards/cannonkeys/instant65/config.h
+++ b/keyboards/cannonkeys/instant65/config.h
@@ -17,10 +17,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
#pragma once
-#define MATRIX_COL_PINS { A8, C13, B9, B8, B7, B6, B5, B4, B3, A7, A5, A4, A3, A2, A1 }
-#define MATRIX_ROW_PINS { A14, A15, A0, B1, B0 }
-#define DIODE_DIRECTION COL2ROW
-
#define BACKLIGHT_PWM_DRIVER PWMD3
#define BACKLIGHT_PWM_CHANNEL 1
#define BACKLIGHT_PAL_MODE 1
diff --git a/keyboards/cannonkeys/instant65/info.json b/keyboards/cannonkeys/instant65/info.json
index eedb9bd5c7..24e2315c1e 100644
--- a/keyboards/cannonkeys/instant65/info.json
+++ b/keyboards/cannonkeys/instant65/info.json
@@ -8,6 +8,11 @@
"pid": "0x1565",
"device_version": "0.0.1"
},
+ "matrix_pins": {
+ "cols": ["A8", "C13", "B9", "B8", "B7", "B6", "B5", "B4", "B3", "A7", "A5", "A4", "A3", "A2", "A1"],
+ "rows": ["A14", "A15", "A0", "B1", "B0"]
+ },
+ "diode_direction": "COL2ROW",
"backlight": {
"pin": "A6",
"levels": 6,
diff --git a/keyboards/cannonkeys/iron165/config.h b/keyboards/cannonkeys/iron165/config.h
index eb7011b349..eb890c1cbf 100644
--- a/keyboards/cannonkeys/iron165/config.h
+++ b/keyboards/cannonkeys/iron165/config.h
@@ -17,10 +17,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
#pragma once
-#define MATRIX_COL_PINS { A5, B10, A3, A2, B0, A8, C13, B9, B8, B7, B6, B5, B4, B3, A15, A14 }
-#define MATRIX_ROW_PINS { B12, B13, B14, B15, A1 }
-#define DIODE_DIRECTION COL2ROW
-
#define BACKLIGHT_PWM_DRIVER PWMD3
#define BACKLIGHT_PWM_CHANNEL 1
#define BACKLIGHT_PAL_MODE 1
diff --git a/keyboards/cannonkeys/iron165/info.json b/keyboards/cannonkeys/iron165/info.json
index b0ad19785c..39eaa70731 100644
--- a/keyboards/cannonkeys/iron165/info.json
+++ b/keyboards/cannonkeys/iron165/info.json
@@ -8,6 +8,11 @@
"pid": "0x5165",
"device_version": "0.0.1"
},
+ "matrix_pins": {
+ "cols": ["A5", "B10", "A3", "A2", "B0", "A8", "C13", "B9", "B8", "B7", "B6", "B5", "B4", "B3", "A15", "A14"],
+ "rows": ["B12", "B13", "B14", "B15", "A1"]
+ },
+ "diode_direction": "COL2ROW",
"backlight": {
"pin": "A6",
"levels": 6,
diff --git a/keyboards/cannonkeys/malicious_ergo/config.h b/keyboards/cannonkeys/malicious_ergo/config.h
index 57fa0cf7c3..a45b992779 100644
--- a/keyboards/cannonkeys/malicious_ergo/config.h
+++ b/keyboards/cannonkeys/malicious_ergo/config.h
@@ -19,10 +19,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
#pragma once
-#define MATRIX_COL_PINS { B1, B0, A7, A1, A5, A4, A3, A10, B9, B8, B7, B6, B5, B4, B3, A15, A14 }
-#define MATRIX_ROW_PINS { B2, B10, B11, A2, A0 }
-#define DIODE_DIRECTION COL2ROW
-
#define BACKLIGHT_PWM_DRIVER PWMD3
#define BACKLIGHT_PWM_CHANNEL 1
#define BACKLIGHT_PAL_MODE 1
diff --git a/keyboards/cannonkeys/malicious_ergo/info.json b/keyboards/cannonkeys/malicious_ergo/info.json
index 9058e07878..cb2691325b 100644
--- a/keyboards/cannonkeys/malicious_ergo/info.json
+++ b/keyboards/cannonkeys/malicious_ergo/info.json
@@ -8,6 +8,11 @@
"pid": "0x0009",
"device_version": "0.0.1"
},
+ "matrix_pins": {
+ "cols": ["B1", "B0", "A7", "A1", "A5", "A4", "A3", "A10", "B9", "B8", "B7", "B6", "B5", "B4", "B3", "A15", "A14"],
+ "rows": ["B2", "B10", "B11", "A2", "A0"]
+ },
+ "diode_direction": "COL2ROW",
"backlight": {
"pin": "A6",
"levels": 6,
diff --git a/keyboards/cannonkeys/nearfield/config.h b/keyboards/cannonkeys/nearfield/config.h
deleted file mode 100755
index 5c989ba3f3..0000000000
--- a/keyboards/cannonkeys/nearfield/config.h
+++ /dev/null
@@ -1,26 +0,0 @@
-/*
-Copyright 2021 Dr.Doof
-
-This program is free software: you can redistribute it and/or modify
-it under the terms of the GNU General Public License as published by
-the Free Software Foundation, either version 2 of the License, or
-(at your option) any later version.
-
-This program is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-GNU General Public License for more details.
-
-You should have received a copy of the GNU General Public License
-along with this program. If not, see <http://www.gnu.org/licenses/>.
-*/
-
-#pragma once
-
-
-/* key matrix pins */
-#define MATRIX_ROW_PINS { B4, D2, D4, D6, D7 }
-#define MATRIX_COL_PINS { D3, D5, C6, C7, B6, B5, B7, F0, F1, F4, F5, F6, F7, B3, B2, D1 }
-
-/* COL2ROW or ROW2COL */
-#define DIODE_DIRECTION COL2ROW
diff --git a/keyboards/cannonkeys/nearfield/info.json b/keyboards/cannonkeys/nearfield/info.json
index 83550cbd36..998cbc14d6 100644
--- a/keyboards/cannonkeys/nearfield/info.json
+++ b/keyboards/cannonkeys/nearfield/info.json
@@ -8,6 +8,11 @@
"pid":"0x0002",
"device_version":"0.0.1"
},
+ "matrix_pins": {
+ "cols": ["D3", "D5", "C6", "C7", "B6", "B5", "B7", "F0", "F1", "F4", "F5", "F6", "F7", "B3", "B2", "D1"],
+ "rows": ["B4", "D2", "D4", "D6", "D7"]
+ },
+ "diode_direction": "COL2ROW",
"processor": "atmega32u4",
"bootloader": "atmel-dfu",
"debounce": 0,
diff --git a/keyboards/cannonkeys/obliterated75/config.h b/keyboards/cannonkeys/obliterated75/config.h
index 6d2ab14c6b..898aff0ff5 100644
--- a/keyboards/cannonkeys/obliterated75/config.h
+++ b/keyboards/cannonkeys/obliterated75/config.h
@@ -17,10 +17,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
#pragma once
-#define MATRIX_COL_PINS { A5, B10, A3, A2, B0, A9, C13, B9, B8, B7, B6, B5, B4, B3, A15, A14 }
-#define MATRIX_ROW_PINS { A13, B12, B11, B14, A8, A1 }
-#define DIODE_DIRECTION COL2ROW
-
#define BACKLIGHT_PWM_DRIVER PWMD3
#define BACKLIGHT_PWM_CHANNEL 1
#define BACKLIGHT_PAL_MODE 1
diff --git a/keyboards/cannonkeys/obliterated75/info.json b/keyboards/cannonkeys/obliterated75/info.json
index 30ea22bd74..fb2e02da53 100644
--- a/keyboards/cannonkeys/obliterated75/info.json
+++ b/keyboards/cannonkeys/obliterated75/info.json
@@ -8,6 +8,11 @@
"pid": "0x0B75",
"device_version": "0.0.1"
},
+ "matrix_pins": {
+ "cols": ["A5", "B10", "A3", "A2", "B0", "A9", "C13", "B9", "B8", "B7", "B6", "B5", "B4", "B3", "A15", "A14"],
+ "rows": ["A13", "B12", "B11", "B14", "A8", "A1"]
+ },
+ "diode_direction": "COL2ROW",
"backlight": {
"pin": "A6",
"levels": 6,
diff --git a/keyboards/cannonkeys/onyx/config.h b/keyboards/cannonkeys/onyx/config.h
index 3c95a53960..a47b76953a 100644
--- a/keyboards/cannonkeys/onyx/config.h
+++ b/keyboards/cannonkeys/onyx/config.h
@@ -17,10 +17,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
#pragma once
-#define MATRIX_COL_PINS { B1, B0, C15, C14, A7, A5, C13, A4, A2, A1, A0, B9, B8, B7, A3, B6, B4, B3, A15 }
-#define MATRIX_ROW_PINS { B11, B10, B2, F0, B5 }
-#define DIODE_DIRECTION COL2ROW
-
#define BACKLIGHT_PWM_DRIVER PWMD3
#define BACKLIGHT_PWM_CHANNEL 1
#define BACKLIGHT_PAL_MODE 1
diff --git a/keyboards/cannonkeys/onyx/info.json b/keyboards/cannonkeys/onyx/info.json
index a4e1a69c9c..0227024f02 100644
--- a/keyboards/cannonkeys/onyx/info.json
+++ b/keyboards/cannonkeys/onyx/info.json
@@ -8,6 +8,11 @@
"pid": "0x0003",
"device_version": "0.0.1"
},
+ "matrix_pins": {
+ "cols": ["B1", "B0", "C15", "C14", "A7", "A5", "C13", "A4", "A2", "A1", "A0", "B9", "B8", "B7", "A3", "B6", "B4", "B3", "A15"],
+ "rows": ["B11", "B10", "B2", "F0", "B5"]
+ },
+ "diode_direction": "COL2ROW",
"backlight": {
"pin": "A6",
"levels": 6,
diff --git a/keyboards/cannonkeys/ortho48/config.h b/keyboards/cannonkeys/ortho48/config.h
index 5c864541c7..fd38d4677f 100644
--- a/keyboards/cannonkeys/ortho48/config.h
+++ b/keyboards/cannonkeys/ortho48/config.h
@@ -17,10 +17,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
#pragma once
-#define MATRIX_COL_PINS { B11, B10, B1, B0, A7, A6, A5, B14, A15, A0, C15, C14}
-#define MATRIX_ROW_PINS { B12, C13, A2, A1 }
-#define DIODE_DIRECTION COL2ROW
-
#define BACKLIGHT_PWM_DRIVER PWMD1
#define BACKLIGHT_PWM_CHANNEL 1
diff --git a/keyboards/cannonkeys/ortho48/info.json b/keyboards/cannonkeys/ortho48/info.json
index ba7f1dbdd4..4e368c2ae3 100644
--- a/keyboards/cannonkeys/ortho48/info.json
+++ b/keyboards/cannonkeys/ortho48/info.json
@@ -8,6 +8,11 @@
"pid": "0x4F48",
"device_version": "0.0.1"
},
+ "matrix_pins": {
+ "cols": ["B11", "B10", "B1", "B0", "A7", "A6", "A5", "B14", "A15", "A0", "C15", "C14"],
+ "rows": ["B12", "C13", "A2", "A1"]
+ },
+ "diode_direction": "COL2ROW",
"backlight": {
"pin": "A8",
"levels": 6,
diff --git a/keyboards/cannonkeys/ortho60/config.h b/keyboards/cannonkeys/ortho60/config.h
index f9c6596a9f..378e08c49d 100644
--- a/keyboards/cannonkeys/ortho60/config.h
+++ b/keyboards/cannonkeys/ortho60/config.h
@@ -17,10 +17,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
#pragma once
-#define MATRIX_COL_PINS { B11, B10, B1, B0, A7, A6, A5, A4, A3, A2, A1, A0 }
-#define MATRIX_ROW_PINS { B3, B4, B5, B6, B7 }
-#define DIODE_DIRECTION COL2ROW
-
#define BACKLIGHT_PWM_DRIVER PWMD1
#define BACKLIGHT_PWM_CHANNEL 1
diff --git a/keyboards/cannonkeys/ortho60/info.json b/keyboards/cannonkeys/ortho60/info.json
index 8426955dae..edb26a8ed1 100644
--- a/keyboards/cannonkeys/ortho60/info.json
+++ b/keyboards/cannonkeys/ortho60/info.json
@@ -8,6 +8,11 @@
"pid": "0x4F60",
"device_version": "0.0.1"
},
+ "matrix_pins": {
+ "cols": ["B11", "B10", "B1", "B0", "A7", "A6", "A5", "A4", "A3", "A2", "A1", "A0"],
+ "rows": ["B3", "B4", "B5", "B6", "B7"]
+ },
+ "diode_direction": "COL2ROW",
"backlight": {
"pin": "A8",
"levels": 6,
diff --git a/keyboards/cannonkeys/ortho75/config.h b/keyboards/cannonkeys/ortho75/config.h
index 5246778d13..378e08c49d 100644
--- a/keyboards/cannonkeys/ortho75/config.h
+++ b/keyboards/cannonkeys/ortho75/config.h
@@ -17,10 +17,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
#pragma once
-#define MATRIX_COL_PINS { B11, B10, B1, B0, A7, A6, A5, B14, A15, A0, C15, C14, B7, B6, B5 }
-#define MATRIX_ROW_PINS { B12, C13, A2, A1, A3 }
-#define DIODE_DIRECTION COL2ROW
-
#define BACKLIGHT_PWM_DRIVER PWMD1
#define BACKLIGHT_PWM_CHANNEL 1
diff --git a/keyboards/cannonkeys/ortho75/info.json b/keyboards/cannonkeys/ortho75/info.json
index 751eeb5297..e74049eb82 100644
--- a/keyboards/cannonkeys/ortho75/info.json
+++ b/keyboards/cannonkeys/ortho75/info.json
@@ -8,6 +8,11 @@
"pid": "0x6464",
"device_version": "0.0.1"
},
+ "matrix_pins": {
+ "cols": ["B11", "B10", "B1", "B0", "A7", "A6", "A5", "B14", "A15", "A0", "C15", "C14", "B7", "B6", "B5"],
+ "rows": ["B12", "C13", "A2", "A1", "A3"]
+ },
+ "diode_direction": "COL2ROW",
"encoder": {
"rotary": [
{"pin_a": "B9", "pin_b": "B8"}
diff --git a/keyboards/cannonkeys/practice60/config.h b/keyboards/cannonkeys/practice60/config.h
index 287b1484e9..6e361ccf78 100644
--- a/keyboards/cannonkeys/practice60/config.h
+++ b/keyboards/cannonkeys/practice60/config.h
@@ -17,10 +17,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
#pragma once
-#define MATRIX_COL_PINS { B11, B10, B1, B0, A7, A6, A5, A4, A3, A2, A1, A0, C15, C14 }
-#define MATRIX_ROW_PINS { B3, B4, B5, B6, B7 }
-#define DIODE_DIRECTION COL2ROW
-
#define BACKLIGHT_PWM_DRIVER PWMD1
#define BACKLIGHT_PWM_CHANNEL 1
diff --git a/keyboards/cannonkeys/practice60/info.json b/keyboards/cannonkeys/practice60/info.json
index a25485038b..f9c793f76e 100644
--- a/keyboards/cannonkeys/practice60/info.json
+++ b/keyboards/cannonkeys/practice60/info.json
@@ -8,6 +8,11 @@
"pid": "0x6060",
"device_version": "0.0.1"
},
+ "matrix_pins": {
+ "cols": ["B11", "B10", "B1", "B0", "A7", "A6", "A5", "A4", "A3", "A2", "A1", "A0", "C15", "C14"],
+ "rows": ["B3", "B4", "B5", "B6", "B7"]
+ },
+ "diode_direction": "COL2ROW",
"backlight": {
"pin": "A8",
"levels": 6,
diff --git a/keyboards/cannonkeys/practice65/config.h b/keyboards/cannonkeys/practice65/config.h
index ac3f193da9..1e62cd6a51 100644
--- a/keyboards/cannonkeys/practice65/config.h
+++ b/keyboards/cannonkeys/practice65/config.h
@@ -17,10 +17,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
#pragma once
-#define MATRIX_COL_PINS { B8, B0, A0, B5, B10, B9, A6, B12, A7, A5, A4, A3, A2, A1, B13, B14 }
-#define MATRIX_ROW_PINS { B4, B11, B1, B7, B6 }
-#define DIODE_DIRECTION COL2ROW
-
#define BACKLIGHT_PWM_DRIVER PWMD1
#define BACKLIGHT_PWM_CHANNEL 1
diff --git a/keyboards/cannonkeys/practice65/info.json b/keyboards/cannonkeys/practice65/info.json
index 17e548a825..64bab13892 100644
--- a/keyboards/cannonkeys/practice65/info.json
+++ b/keyboards/cannonkeys/practice65/info.json
@@ -8,6 +8,11 @@
"pid": "0x6565",
"device_version": "0.0.1"
},
+ "matrix_pins": {
+ "cols": ["B8", "B0", "A0", "B5", "B10", "B9", "A6", "B12", "A7", "A5", "A4", "A3", "A2", "A1", "B13", "B14"],
+ "rows": ["B4", "B11", "B1", "B7", "B6"]
+ },
+ "diode_direction": "COL2ROW",
"backlight": {
"pin": "A8",
"levels": 6,
diff --git a/keyboards/cannonkeys/rekt1800/config.h b/keyboards/cannonkeys/rekt1800/config.h
index 37d156feb9..7f21b3f8a8 100644
--- a/keyboards/cannonkeys/rekt1800/config.h
+++ b/keyboards/cannonkeys/rekt1800/config.h
@@ -17,10 +17,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
#pragma once
-#define MATRIX_COL_PINS { B12, A14, A15, B3, B4, B5, B6, B7, B8, B9, A7, B0, B1, B2, B10, A3, A4, A5, C15 }
-#define MATRIX_ROW_PINS { C13, C14, A0, A1, A2, B11 }
-#define DIODE_DIRECTION COL2ROW
-
#define BACKLIGHT_PWM_DRIVER PWMD3
#define BACKLIGHT_PWM_CHANNEL 1
#define BACKLIGHT_PAL_MODE 1
diff --git a/keyboards/cannonkeys/rekt1800/info.json b/keyboards/cannonkeys/rekt1800/info.json
index e68f214427..675b572739 100644
--- a/keyboards/cannonkeys/rekt1800/info.json
+++ b/keyboards/cannonkeys/rekt1800/info.json
@@ -8,6 +8,11 @@
"pid": "0x2377",
"device_version": "0.0.1"
},
+ "matrix_pins": {
+ "cols": ["B12", "A14", "A15", "B3", "B4", "B5", "B6", "B7", "B8", "B9", "A7", "B0", "B1", "B2", "B10", "A3", "A4", "A5", "C15"],
+ "rows": ["C13", "C14", "A0", "A1", "A2", "B11"]
+ },
+ "diode_direction": "COL2ROW",
"backlight": {
"pin": "A6",
"levels": 6,
diff --git a/keyboards/cannonkeys/sagittarius/config.h b/keyboards/cannonkeys/sagittarius/config.h
index 5edf9fdeb9..b65cf4792b 100644
--- a/keyboards/cannonkeys/sagittarius/config.h
+++ b/keyboards/cannonkeys/sagittarius/config.h
@@ -17,10 +17,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
#pragma once
-#define MATRIX_COL_PINS { A7, A5, A4, A3, A2, A1, A0, B5, A13, B2, B1, B0, B9, B8, B7, B6 }
-#define MATRIX_ROW_PINS { B10, B14, A8, A9, A10, C13, C14, C15, F0, F1 }
-#define DIODE_DIRECTION COL2ROW
-
#define BACKLIGHT_PWM_DRIVER PWMD3
#define BACKLIGHT_PWM_CHANNEL 1
#define BACKLIGHT_PAL_MODE 1
diff --git a/keyboards/cannonkeys/sagittarius/info.json b/keyboards/cannonkeys/sagittarius/info.json
index 2b25ee6b98..e5e01875a5 100644
--- a/keyboards/cannonkeys/sagittarius/info.json
+++ b/keyboards/cannonkeys/sagittarius/info.json
@@ -8,6 +8,11 @@
"pid": "0x0001",
"device_version": "0.0.1"
},
+ "matrix_pins": {
+ "cols": ["A7", "A5", "A4", "A3", "A2", "A1", "A0", "B5", "A13", "B2", "B1", "B0", "B9", "B8", "B7", "B6"],
+ "rows": ["B10", "B14", "A8", "A9", "A10", "C13", "C14", "C15", "F0", "F1"]
+ },
+ "diode_direction": "COL2ROW",
"backlight": {
"pin": "A6",
"levels": 6,
diff --git a/keyboards/cannonkeys/satisfaction75/config.h b/keyboards/cannonkeys/satisfaction75/config.h
index ac9548dd27..9005b064b7 100644
--- a/keyboards/cannonkeys/satisfaction75/config.h
+++ b/keyboards/cannonkeys/satisfaction75/config.h
@@ -23,10 +23,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
/* LSE clock */
#define STM32_LSECLK 32768
-#define MATRIX_COL_PINS { B1, B2, B10, B11, B12, B13, B14, A8, A9, A10, B0, A7, A5, B5, A15, A1 }
-#define MATRIX_ROW_PINS { B3, B4, A0, A2, A4, A3 }
-#define DIODE_DIRECTION COL2ROW
-
// I2C config
#define I2C_DRIVER I2CD1
#define I2C1_SCL_PIN B6
diff --git a/keyboards/cannonkeys/satisfaction75/info.json b/keyboards/cannonkeys/satisfaction75/info.json
index 9bf8459b1a..60695b9ac7 100644
--- a/keyboards/cannonkeys/satisfaction75/info.json
+++ b/keyboards/cannonkeys/satisfaction75/info.json
@@ -8,6 +8,11 @@
"pid": "0x57F5",
"device_version": "0.0.1"
},
+ "matrix_pins": {
+ "cols": ["B1", "B2", "B10", "B11", "B12", "B13", "B14", "A8", "A9", "A10", "B0", "A7", "A5", "B5", "A15", "A1"],
+ "rows": ["B3", "B4", "A0", "A2", "A4", "A3"]
+ },
+ "diode_direction": "COL2ROW",
"encoder": {
"rotary": [
{"pin_a": "B9", "pin_b": "B8", "resolution": 2}
diff --git a/keyboards/cannonkeys/savage65/config.h b/keyboards/cannonkeys/savage65/config.h
index 79414a9a78..97fbded3c0 100644
--- a/keyboards/cannonkeys/savage65/config.h
+++ b/keyboards/cannonkeys/savage65/config.h
@@ -17,10 +17,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
#pragma once
-#define MATRIX_COL_PINS { A5, B10, A3, A2, B0, A9, C13, B9, B8, B7, B6, B5, B4, B3, A15, A14 }
-#define MATRIX_ROW_PINS { B12, B11, B14, A8, A1 }
-#define DIODE_DIRECTION COL2ROW
-
#define BACKLIGHT_PWM_DRIVER PWMD3
#define BACKLIGHT_PWM_CHANNEL 1
#define BACKLIGHT_PAL_MODE 1
diff --git a/keyboards/cannonkeys/savage65/info.json b/keyboards/cannonkeys/savage65/info.json
index 1aa34de891..c8e3dd0cf8 100644
--- a/keyboards/cannonkeys/savage65/info.json
+++ b/keyboards/cannonkeys/savage65/info.json
@@ -8,6 +8,11 @@
"pid": "0x5A65",
"device_version": "0.0.1"
},
+ "matrix_pins": {
+ "cols": ["A5", "B10", "A3", "A2", "B0", "A9", "C13", "B9", "B8", "B7", "B6", "B5", "B4", "B3", "A15", "A14"],
+ "rows": ["B12", "B11", "B14", "A8", "A1"]
+ },
+ "diode_direction": "COL2ROW",
"backlight": {
"pin": "A6",
"levels": 6,
diff --git a/keyboards/cannonkeys/tmov2/config.h b/keyboards/cannonkeys/tmov2/config.h
index 8722ba8d54..1dfaa69473 100644
--- a/keyboards/cannonkeys/tmov2/config.h
+++ b/keyboards/cannonkeys/tmov2/config.h
@@ -17,10 +17,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
#pragma once
-#define MATRIX_COL_PINS { B14, A14, B1, C13, C14, C15, F0, F1, B9, B8, B7, B6, B5, B4, B3, A15 }
-#define MATRIX_ROW_PINS { A10, A9, A8, B12 }
-#define DIODE_DIRECTION COL2ROW
-
#define BACKLIGHT_PWM_DRIVER PWMD3
#define BACKLIGHT_PWM_CHANNEL 1
#define BACKLIGHT_PAL_MODE 1
diff --git a/keyboards/cannonkeys/tmov2/info.json b/keyboards/cannonkeys/tmov2/info.json
index bdb6cd7453..cee401b524 100644
--- a/keyboards/cannonkeys/tmov2/info.json
+++ b/keyboards/cannonkeys/tmov2/info.json
@@ -8,6 +8,11 @@
"pid": "0x70F2",
"device_version": "0.0.1"
},
+ "matrix_pins": {
+ "cols": ["B14", "A14", "B1", "C13", "C14", "C15", "F0", "F1", "B9", "B8", "B7", "B6", "B5", "B4", "B3", "A15"],
+ "rows": ["A10", "A9", "A8", "B12"]
+ },
+ "diode_direction": "COL2ROW",
"backlight": {
"pin": "A6",
"levels": 6,
diff --git a/keyboards/cannonkeys/tsukuyomi/config.h b/keyboards/cannonkeys/tsukuyomi/config.h
index 8987acd837..97fbded3c0 100644
--- a/keyboards/cannonkeys/tsukuyomi/config.h
+++ b/keyboards/cannonkeys/tsukuyomi/config.h
@@ -17,10 +17,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
#pragma once
-#define MATRIX_COL_PINS { A7, A5, B10, A3, A2, B0, A9, C13, B9, B8, B7, B6, B5, B4, B3, A15, A14 }
-#define MATRIX_ROW_PINS { B12, B11, B14, A8, A1 }
-#define DIODE_DIRECTION COL2ROW
-
#define BACKLIGHT_PWM_DRIVER PWMD3
#define BACKLIGHT_PWM_CHANNEL 1
#define BACKLIGHT_PAL_MODE 1
diff --git a/keyboards/cannonkeys/tsukuyomi/info.json b/keyboards/cannonkeys/tsukuyomi/info.json
index fb5b22e5b7..7cf2cba414 100644
--- a/keyboards/cannonkeys/tsukuyomi/info.json
+++ b/keyboards/cannonkeys/tsukuyomi/info.json
@@ -8,6 +8,11 @@
"pid": "0x0002",
"device_version": "0.0.1"
},
+ "matrix_pins": {
+ "cols": ["A7", "A5", "B10", "A3", "A2", "B0", "A9", "C13", "B9", "B8", "B7", "B6", "B5", "B4", "B3", "A15", "A14"],
+ "rows": ["B12", "B11", "B14", "A8", "A1"]
+ },
+ "diode_direction": "COL2ROW",
"backlight": {
"pin": "A6",
"levels": 6,
diff --git a/keyboards/cannonkeys/vicious40/config.h b/keyboards/cannonkeys/vicious40/config.h
index d989d427ff..a47b76953a 100644
--- a/keyboards/cannonkeys/vicious40/config.h
+++ b/keyboards/cannonkeys/vicious40/config.h
@@ -17,10 +17,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
#pragma once
-#define MATRIX_COL_PINS { B0, A7, A5, B1, B2, B10, B11, A9, B6, B7, B8, B9 }
-#define MATRIX_ROW_PINS { A15, B3, B4, B5 }
-#define DIODE_DIRECTION COL2ROW
-
#define BACKLIGHT_PWM_DRIVER PWMD3
#define BACKLIGHT_PWM_CHANNEL 1
#define BACKLIGHT_PAL_MODE 1
diff --git a/keyboards/cannonkeys/vicious40/info.json b/keyboards/cannonkeys/vicious40/info.json
index 384343b8e9..d995250980 100644
--- a/keyboards/cannonkeys/vicious40/info.json
+++ b/keyboards/cannonkeys/vicious40/info.json
@@ -8,6 +8,11 @@
"pid": "0x0004",
"device_version": "0.0.1"
},
+ "matrix_pins": {
+ "cols": ["B0", "A7", "A5", "B1", "B2", "B10", "B11", "A9", "B6", "B7", "B8", "B9"],
+ "rows": ["A15", "B3", "B4", "B5"]
+ },
+ "diode_direction": "COL2ROW",
"backlight": {
"pin": "A6",
"levels": 6,
diff --git a/keyboards/capsunlocked/cu24/config.h b/keyboards/capsunlocked/cu24/config.h
index 65f64c2f09..e6492683ee 100644
--- a/keyboards/capsunlocked/cu24/config.h
+++ b/keyboards/capsunlocked/cu24/config.h
@@ -16,23 +16,6 @@
#pragma once
-
-/*
- * Keyboard Matrix Assignments
- *
- * Change this to how you wired your keyboard
- * COLS: AVR pins used for columns, left to right
- * ROWS: AVR pins used for rows, top to bottom
- * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
- * ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
- *
-*/
-#define MATRIX_ROW_PINS { E6, F5, B4, B6, C6, C7 }
-#define MATRIX_COL_PINS { F0, F1, D0, D1 }
-
-/* COL2ROW, ROW2COL*/
-#define DIODE_DIRECTION ROW2COL
-
/* RGB Glow */
#define RGB_DI_PIN F4 // The pin the LED strip is connected to
#define RGBLED_NUM 5 // Number of LEDs in your strip
diff --git a/keyboards/capsunlocked/cu24/info.json b/keyboards/capsunlocked/cu24/info.json
index ea361a2bf4..a95382d562 100644
--- a/keyboards/capsunlocked/cu24/info.json
+++ b/keyboards/capsunlocked/cu24/info.json
@@ -8,6 +8,11 @@
"pid": "0x0000",
"device_version": "0.0.1"
},
+ "matrix_pins": {
+ "cols": ["F0", "F1", "D0", "D1"],
+ "rows": ["E6", "F5", "B4", "B6", "C6", "C7"]
+ },
+ "diode_direction": "ROW2COL",
"backlight": {
"pin": "B5",
"levels": 5,
diff --git a/keyboards/capsunlocked/cu65/config.h b/keyboards/capsunlocked/cu65/config.h
index fd829724fc..cf38d9dcc6 100644
--- a/keyboards/capsunlocked/cu65/config.h
+++ b/keyboards/capsunlocked/cu65/config.h
@@ -17,23 +17,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
#pragma once
-
-/*
- * Keyboard Matrix Assignments
- *
- * Change this to how you wired your keyboard
- * COLS: AVR pins used for columns, left to right
- * ROWS: AVR pins used for rows, top to bottom
- * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
- * ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
- *
-*/
-#define MATRIX_ROW_PINS { F1, F4, F5, F6, D3 }
-#define MATRIX_COL_PINS { D6, D7, D4, B4, B5, B6, C6, D5, C7, F0, E6, B0, B1, B7, B3, B2 }
-
-/* COL2ROW, ROW2COL */
-#define DIODE_DIRECTION COL2ROW
-
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
#define LOCKING_SUPPORT_ENABLE
/* Locking resynchronize hack */
diff --git a/keyboards/capsunlocked/cu65/info.json b/keyboards/capsunlocked/cu65/info.json
index 8f91a34974..137bef46a5 100644
--- a/keyboards/capsunlocked/cu65/info.json
+++ b/keyboards/capsunlocked/cu65/info.json
@@ -8,6 +8,11 @@
"pid": "0x0065",
"device_version": "0.0.1"
},
+ "matrix_pins": {
+ "cols": ["D6", "D7", "D4", "B4", "B5", "B6", "C6", "D5", "C7", "F0", "E6", "B0", "B1", "B7", "B3", "B2"],
+ "rows": ["F1", "F4", "F5", "F6", "D3"]
+ },
+ "diode_direction": "COL2ROW",
"processor": "atmega32u4",
"bootloader": "atmel-dfu",
"community_layouts": ["65_ansi_blocker", "65_iso_blocker", "65_iso_blocker_split_bs"],
diff --git a/keyboards/capsunlocked/cu7/config.h b/keyboards/capsunlocked/cu7/config.h
index cdc031b93b..067756faab 100644
--- a/keyboards/capsunlocked/cu7/config.h
+++ b/keyboards/capsunlocked/cu7/config.h
@@ -16,23 +16,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
#pragma once
-
-/*
- * Keyboard Matrix Assignments
- *
- * Change this to how you wired your keyboard
- * COLS: AVR pins used for columns, left to right
- * ROWS: AVR pins used for rows, top to bottom
- * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
- * ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
- *
-*/
-#define MATRIX_ROW_PINS { D7, F0, F6 }
-#define MATRIX_COL_PINS { F5, F7, F4 }
-
-/* COL2ROW, ROW2COL, or CUSTOM_MATRIX */
-#define DIODE_DIRECTION COL2ROW
-
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
#define LOCKING_SUPPORT_ENABLE
/* Locking resynchronize hack */
diff --git a/keyboards/capsunlocked/cu7/info.json b/keyboards/capsunlocked/cu7/info.json
index ebd7b6d491..c210f9a96c 100644
--- a/keyboards/capsunlocked/cu7/info.json
+++ b/keyboards/capsunlocked/cu7/info.json
@@ -8,6 +8,11 @@
"pid": "0x0007",
"device_version": "0.0.1"
},
+ "matrix_pins": {
+ "cols": ["F5", "F7", "F4"],
+ "rows": ["D7", "F0", "F6"]
+ },
+ "diode_direction": "COL2ROW",
"encoder": {
"rotary": [
{"pin_a": "D6", "pin_b": "D4", "resolution": 2}
diff --git a/keyboards/capsunlocked/cu75/config.h b/keyboards/capsunlocked/cu75/config.h
index 52dff09103..c37363f63d 100644
--- a/keyboards/capsunlocked/cu75/config.h
+++ b/keyboards/capsunlocked/cu75/config.h
@@ -17,11 +17,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
#pragma once
-
-#define DIODE_DIRECTION COL2ROW
-#define MATRIX_ROW_PINS {F1, B7, B3, D2, D3, B2}
-#define MATRIX_COL_PINS {F4, F5, F6, F7, C7, C6, B6, B5, B4, D7, D6, D4, D5, B1, B0, F0}
-
#define RGB_DI_PIN C7 // Have to set it to something to get the ws2812 code to compile
#define RGBLED_NUM 24 // Number of LEDs
#define RGBLIGHT_EFFECT_BREATHING
diff --git a/keyboards/capsunlocked/cu75/info.json b/keyboards/capsunlocked/cu75/info.json
index 7f4eb623ac..14565d0f70 100644
--- a/keyboards/capsunlocked/cu75/info.json
+++ b/keyboards/capsunlocked/cu75/info.json
@@ -8,6 +8,11 @@
"pid": "0x6062",
"device_version": "0.0.1"
},
+ "matrix_pins": {
+ "cols": ["F4", "F5", "F6", "F7", "C7", "C6", "B6", "B5", "B4", "D7", "D6", "D4", "D5", "B1", "B0", "F0"],
+ "rows": ["F1", "B7", "B3", "D2", "D3", "B2"]
+ },
+ "diode_direction": "COL2ROW",
"backlight": {
"driver": "custom",
"levels": 8
diff --git a/keyboards/capsunlocked/cu80/v1/config.h b/keyboards/capsunlocked/cu80/v1/config.h
index d604623f6e..991c996ea8 100644
--- a/keyboards/capsunlocked/cu80/v1/config.h
+++ b/keyboards/capsunlocked/cu80/v1/config.h
@@ -17,13 +17,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
#pragma once
-
-#define MATRIX_ROW_PINS { B1, B5, B4, F7, D7, D6 }
-#define MATRIX_COL_PINS { F6, F5, F4, F1, F0, C7, C6, B6, B0, E6, B7, B3, B2, D2, D3, D5, D4}
-
-/* COL2ROW, ROW2COL */
-#define DIODE_DIRECTION COL2ROW
-
#define LOCKING_SUPPORT_ENABLE
/* Locking resynchronize hack */
#define LOCKING_RESYNC_ENABLE
diff --git a/keyboards/capsunlocked/cu80/v1/info.json b/keyboards/capsunlocked/cu80/v1/info.json
index 72b2e681c9..655318e063 100644
--- a/keyboards/capsunlocked/cu80/v1/info.json
+++ b/keyboards/capsunlocked/cu80/v1/info.json
@@ -8,6 +8,11 @@
"pid": "0x0000",
"device_version": "0.0.1"
},
+ "matrix_pins": {
+ "cols": ["F6", "F5", "F4", "F1", "F0", "C7", "C6", "B6", "B0", "E6", "B7", "B3", "B2", "D2", "D3", "D5", "D4"],
+ "rows": ["B1", "B5", "B4", "F7", "D7", "D6"]
+ },
+ "diode_direction": "COL2ROW",
"processor": "atmega32u4",
"bootloader": "atmel-dfu",
"community_layouts": ["tkl_iso", "tkl_ansi"],
diff --git a/keyboards/carbo65/config.h b/keyboards/carbo65/config.h
index af627558fe..79fdc4275f 100644
--- a/keyboards/carbo65/config.h
+++ b/keyboards/carbo65/config.h
@@ -17,12 +17,5 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
#pragma once
-
-#define MATRIX_ROW_PINS { A2, B9, B8, B5, B4 }
-#define MATRIX_COL_PINS { A1, B1, B0, A7, A6, A5, A4, A3, B2, B10, B11, B12, B13, B14, B15 }
-
-/* COL2ROW, ROW2COL*/
-#define DIODE_DIRECTION COL2ROW
-
/* Ensure we jump to bootloader if the QK_BOOT keycode was pressed */
#define EARLY_INIT_PERFORM_BOOTLOADER_JUMP TRUE
diff --git a/keyboards/carbo65/info.json b/keyboards/carbo65/info.json
index c77e3bb9e6..c63c2c747c 100644
--- a/keyboards/carbo65/info.json
+++ b/keyboards/carbo65/info.json
@@ -8,6 +8,11 @@
"pid": "0x4336",
"device_version": "0.0.1"
},
+ "matrix_pins": {
+ "cols": ["A1", "B1", "B0", "A7", "A6", "A5", "A4", "A3", "B2", "B10", "B11", "B12", "B13", "B14", "B15"],
+ "rows": ["A2", "B9", "B8", "B5", "B4"]
+ },
+ "diode_direction": "COL2ROW",
"indicators": {
"caps_lock": "B6",
"on_state": 0
diff --git a/keyboards/catch22/config.h b/keyboards/catch22/config.h
index 91bf0b5d95..396a5ce868 100644
--- a/keyboards/catch22/config.h
+++ b/keyboards/catch22/config.h
@@ -16,14 +16,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
#pragma once
-
-/* key matrix pins */
-#define MATRIX_ROW_PINS { B6, B2, B3, B1, F7 }
-#define MATRIX_COL_PINS { B5, B4, E6, D7, C6 }
-
-/* COL2ROW or ROW2COL */
-#define DIODE_DIRECTION COL2ROW
-
/* key combination for command */
#define IS_COMMAND() ( \
false \
diff --git a/keyboards/catch22/info.json b/keyboards/catch22/info.json
index dcdf23f953..f9a9b08ff7 100644
--- a/keyboards/catch22/info.json
+++ b/keyboards/catch22/info.json
@@ -6,6 +6,11 @@
"pid": "0xCA22",
"device_version": "0.0.1"
},
+ "matrix_pins": {
+ "cols": ["B5", "B4", "E6", "D7", "C6"],
+ "rows": ["B6", "B2", "B3", "B1", "F7"]
+ },
+ "diode_direction": "COL2ROW",
"processor": "atmega32u4",
"bootloader": "caterina",
"layouts": {
diff --git a/keyboards/cest73/tkm/config.h b/keyboards/cest73/tkm/config.h
index 062d3434eb..9b6132cbdb 100644
--- a/keyboards/cest73/tkm/config.h
+++ b/keyboards/cest73/tkm/config.h
@@ -15,18 +15,5 @@
*/
#pragma once
-
-/* matrix sz handy ruler: 1 2 3 4 5 6 7 8 9 10 11 12 */
-/* key matrix pins */
-/* row handy ruler: r0 r1 r2 r3 r4 r5 r6 r7 r8 r9 r10 */
-#define MATRIX_ROW_PINS { B0, B1, B2, B3, B4, B5, B6, B7, C6, C7, D0 }
-/* column handy ruler: c0 c1 c2 c3 c4 c5 c6 c7 c8 c9 */
-#define MATRIX_COL_PINS { D1, D2, D3, D4, D5, D6, D7, F0, F1, F4 }
-
-//NOTE: if D6 pin shows any issues in exploatation the LED on the Teensy is to be removed
-
-/* COL2ROW or ROW2COL */
-#define DIODE_DIRECTION COL2ROW
-
/* force n-key rollover*/
#define FORCE_NKRO
diff --git a/keyboards/cest73/tkm/info.json b/keyboards/cest73/tkm/info.json
index 6054f24467..e55973be0f 100644
--- a/keyboards/cest73/tkm/info.json
+++ b/keyboards/cest73/tkm/info.json
@@ -8,6 +8,11 @@
"pid": "0xAA55",
"device_version": "0.0.1"
},
+ "matrix_pins": {
+ "cols": ["D1", "D2", "D3", "D4", "D5", "D6", "D7", "F0", "F1", "F4"],
+ "rows": ["B0", "B1", "B2", "B3", "B4", "B5", "B6", "B7", "C6", "C7", "D0"]
+ },
+ "diode_direction": "COL2ROW",
"backlight": {
"pin": "E6"
},
diff --git a/keyboards/chalice/config.h b/keyboards/chalice/config.h
index a71d46d6b5..88e9e5f9c8 100644
--- a/keyboards/chalice/config.h
+++ b/keyboards/chalice/config.h
@@ -17,13 +17,6 @@
#pragma once
-
-#define MATRIX_ROW_PINS {F4, D1, D0, F5, D4, F6, B4, B5, B2, B6}
-#define MATRIX_COL_PINS {F7, C6, B1, D2, E6, B3, D7}
-
-/* COL2ROW, ROW2COL*/
-#define DIODE_DIRECTION COL2ROW
-
#define RGB_DI_PIN D3
#ifdef RGBLIGHT_ENABLE
diff --git a/keyboards/chalice/info.json b/keyboards/chalice/info.json
index 35f5c5fb1e..4075fa42f2 100644
--- a/keyboards/chalice/info.json
+++ b/keyboards/chalice/info.json
@@ -8,6 +8,11 @@
"pid": "0x000C",
"device_version": "0.0.1"
},
+ "matrix_pins": {
+ "cols": ["F7", "C6", "B1", "D2", "E6", "B3", "D7"],
+ "rows": ["F4", "D1", "D0", "F5", "D4", "F6", "B4", "B5", "B2", "B6"]
+ },
+ "diode_direction": "COL2ROW",
"processor": "atmega32u4",
"bootloader": "atmel-dfu",
"layouts": {
diff --git a/keyboards/chaos65/config.h b/keyboards/chaos65/config.h
index 713238dfa6..caf3e9d4e4 100644
--- a/keyboards/chaos65/config.h
+++ b/keyboards/chaos65/config.h
@@ -16,13 +16,5 @@
#pragma once
-
-/* Keyboard Matrix Assignments */
-#define MATRIX_ROW_PINS { D0, D1, D2, D3, D5 }
-#define MATRIX_COL_PINS { B0, B1, B2, B3, D4, D6, D7, B4, B5, B6, C6, F7, F6, F5, F4 }
-
-/* COL2ROW, ROW2COL */
-#define DIODE_DIRECTION COL2ROW
-
/* NKRO */
#define FORCE_NKRO
diff --git a/keyboards/chaos65/info.json b/keyboards/chaos65/info.json
index 3243967c03..0be9791911 100644
--- a/keyboards/chaos65/info.json
+++ b/keyboards/chaos65/info.json
@@ -8,6 +8,11 @@
"pid": "0x1688",
"device_version": "0.0.1"
},
+ "matrix_pins": {
+ "cols": ["B0", "B1", "B2", "B3", "D4", "D6", "D7", "B4", "B5", "B6", "C6", "F7", "F6", "F5", "F4"],
+ "rows": ["D0", "D1", "D2", "D3", "D5"]
+ },
+ "diode_direction": "COL2ROW",
"processor": "atmega32u4",
"bootloader": "atmel-dfu",
"community_layouts": ["65_ansi_blocker", "65_ansi_blocker_tsangan", "65_iso_blocker"],
diff --git a/keyboards/charue/charon/config.h b/keyboards/charue/charon/config.h
deleted file mode 100644
index 1140991c95..0000000000
--- a/keyboards/charue/charon/config.h
+++ /dev/null
@@ -1,24 +0,0 @@
-/*
-Copyright 2021 Charue Design
-
-This program is free software: you can redistribute it and/or modify
-it under the terms of the GNU General Public License as published by
-the Free Software Foundation, either version 2 of the License, or
-(at your option) any later version.
-
-This program is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-GNU General Public License for more details.
-
-You should have received a copy of the GNU General Public License
-along with this program. If not, see <http://www.gnu.org/licenses/>.
-*/
-
-#pragma once
-
-
-/* Keyboard Matrix Assignments */
-#define MATRIX_ROW_PINS { B0, B1, B2, B3, C7 }
-#define MATRIX_COL_PINS { D3, D5, B4, D7, D6, D4, F7, F6, F5, F4, F1, F0, B5, B6, C6 }
-#define DIODE_DIRECTION COL2ROW
diff --git a/keyboards/charue/charon/info.json b/keyboards/charue/charon/info.json
index 406b845492..a4a8504fc8 100644
--- a/keyboards/charue/charon/info.json
+++ b/keyboards/charue/charon/info.json
@@ -8,6 +8,11 @@
"pid": "0x4348",
"device_version": "0.0.1"
},
+ "matrix_pins": {
+ "cols": ["D3", "D5", "B4", "D7", "D6", "D4", "F7", "F6", "F5", "F4", "F1", "F0", "B5", "B6", "C6"],
+ "rows": ["B0", "B1", "B2", "B3", "C7"]
+ },
+ "diode_direction": "COL2ROW",
"indicators": {
"caps_lock": "E6"
},
diff --git a/keyboards/charue/sunsetter/config.h b/keyboards/charue/sunsetter/config.h
deleted file mode 100644
index 1219eac27c..0000000000
--- a/keyboards/charue/sunsetter/config.h
+++ /dev/null
@@ -1,22 +0,0 @@
-/*
-Copyright 2020 Michael Pio "Coarse" Mayol <mfmayol@up.edu.ph>
-
-This program is free software: you can redistribute it and/or modify
-it under the terms of the GNU General Public License as published by
-the Free Software Foundation, either version 2 of the License, or
-(at your option) any later version.
-
-This program is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-GNU General Public License for more details.
-
-You should have received a copy of the GNU General Public License
-along with this program. If not, see <http://www.gnu.org/licenses/>.
-*/
-
-#pragma once
-
-#define MATRIX_COL_PINS { B13, B12, B1, B0, A7, A6, A5, A4, A3, B9, B8, B7, B6, B5, B4, F0, B3, A15 }
-#define MATRIX_ROW_PINS { A8, B14, B11, B10, B2 }
-#define DIODE_DIRECTION COL2ROW
diff --git a/keyboards/charue/sunsetter/info.json b/keyboards/charue/sunsetter/info.json
index 651561f47d..b499907a85 100644
--- a/keyboards/charue/sunsetter/info.json
+++ b/keyboards/charue/sunsetter/info.json
@@ -8,6 +8,11 @@
"pid": "0x5353",
"device_version": "0.0.1"
},
+ "matrix_pins": {
+ "cols": ["B13", "B12", "B1", "B0", "A7", "A6", "A5", "A4", "A3", "B9", "B8", "B7", "B6", "B5", "B4", "F0", "B3", "A15"],
+ "rows": ["A8", "B14", "B11", "B10", "B2"]
+ },
+ "diode_direction": "COL2ROW",
"indicators": {
"caps_lock": "F1",
"on_state": 0
diff --git a/keyboards/charue/sunsetter_r2/config.h b/keyboards/charue/sunsetter_r2/config.h
index b3a3ab3f9b..e720d702d4 100644
--- a/keyboards/charue/sunsetter_r2/config.h
+++ b/keyboards/charue/sunsetter_r2/config.h
@@ -3,14 +3,6 @@
#pragma once
-
-/* Keyboard Matrix Assignment s*/
-#define MATRIX_ROW_PINS { B3, B2, F4, F5, F6 }
-#define MATRIX_COL_PINS { F0, F1, F7, B1, D0, D1, D2, D3, D5, D4, D6, D7, B4, B5, B6, C6, C7 }
-
-/* COL2ROW, ROW2COL */
-#define DIODE_DIRECTION COL2ROW
-
/* RGB */
#define RGB_DI_PIN E6
#ifdef RGB_DI_PIN
diff --git a/keyboards/charue/sunsetter_r2/info.json b/keyboards/charue/sunsetter_r2/info.json
index fcd9d0b3fe..4d37fcd819 100644
--- a/keyboards/charue/sunsetter_r2/info.json
+++ b/keyboards/charue/sunsetter_r2/info.json
@@ -8,6 +8,11 @@
"pid": "0x5335",
"device_version": "0.0.1"
},
+ "matrix_pins": {
+ "cols": ["F0", "F1", "F7", "B1", "D0", "D1", "D2", "D3", "D5", "D4", "D6", "D7", "B4", "B5", "B6", "C6", "C7"],
+ "rows": ["B3", "B2", "F4", "F5", "F6"]
+ },
+ "diode_direction": "COL2ROW",
"indicators": {
"caps_lock": "B0"
},
diff --git a/keyboards/chavdai40/rev1/config.h b/keyboards/chavdai40/rev1/config.h
index 9918802434..277219f16d 100644
--- a/keyboards/chavdai40/rev1/config.h
+++ b/keyboards/chavdai40/rev1/config.h
@@ -22,9 +22,3 @@
/* usb power settings */
#define USB_MAX_POWER_CONSUMPTION 100
-
-#define MATRIX_ROW_PINS { A0, A15, B5, B6 }
-#define MATRIX_COL_PINS { B8, B4, B3, B2, B1, B0, A7, A6, A5, A4, A3, A2, A1 }
-
-/* COL2ROW, ROW2COL*/
-#define DIODE_DIRECTION COL2ROW
diff --git a/keyboards/chavdai40/rev1/info.json b/keyboards/chavdai40/rev1/info.json
index 9f345a3ae7..0e518b6de0 100644
--- a/keyboards/chavdai40/rev1/info.json
+++ b/keyboards/chavdai40/rev1/info.json
@@ -3,6 +3,11 @@
"usb": {
"device_version": "0.0.1"
},
+ "matrix_pins": {
+ "cols": ["B8", "B4", "B3", "B2", "B1", "B0", "A7", "A6", "A5", "A4", "A3", "A2", "A1"],
+ "rows": ["A0", "A15", "B5", "B6"]
+ },
+ "diode_direction": "COL2ROW",
"processor": "STM32F042",
"bootloader": "stm32-dfu"
}
diff --git a/keyboards/chavdai40/rev2/config.h b/keyboards/chavdai40/rev2/config.h
index c6f7884275..277219f16d 100644
--- a/keyboards/chavdai40/rev2/config.h
+++ b/keyboards/chavdai40/rev2/config.h
@@ -22,9 +22,3 @@
/* usb power settings */
#define USB_MAX_POWER_CONSUMPTION 100
-
-#define MATRIX_ROW_PINS { A0, A15, B5, B6 }
-#define MATRIX_COL_PINS { B7, B4, B3, A8, B1, B0, A7, A6, A5, A4, A3, A2, A1 }
-
-/* COL2ROW, ROW2COL*/
-#define DIODE_DIRECTION COL2ROW
diff --git a/keyboards/chavdai40/rev2/info.json b/keyboards/chavdai40/rev2/info.json
index 5ffacfd303..3216cb565d 100644
--- a/keyboards/chavdai40/rev2/info.json
+++ b/keyboards/chavdai40/rev2/info.json
@@ -3,6 +3,11 @@
"usb": {
"device_version": "0.0.2"
},
+ "matrix_pins": {
+ "cols": ["B7", "B4", "B3", "A8", "B1", "B0", "A7", "A6", "A5", "A4", "A3", "A2", "A1"],
+ "rows": ["A0", "A15", "B5", "B6"]
+ },
+ "diode_direction": "COL2ROW",
"processor": "STM32F042",
"bootloader": "stm32-dfu"
}
diff --git a/keyboards/checkerboards/axon40/config.h b/keyboards/checkerboards/axon40/config.h
index aca5940c63..825d77b4ae 100644
--- a/keyboards/checkerboards/axon40/config.h
+++ b/keyboards/checkerboards/axon40/config.h
@@ -16,15 +16,6 @@
#pragma once
-
-/* key matrix pins */
-#define MATRIX_ROW_PINS { D2, D3, D1, D5 }
-#define MATRIX_COL_PINS { C7, B7, D4, D6, F0, F1, C6, B6, B5, B4, E6, B0 }
-
-
-/* COL2ROW or ROW2COL */
-#define DIODE_DIRECTION COL2ROW
-
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
#define LOCKING_SUPPORT_ENABLE
diff --git a/keyboards/checkerboards/axon40/info.json b/keyboards/checkerboards/axon40/info.json
index d3c6c1cb70..7bc52e7b9c 100644
--- a/keyboards/checkerboards/axon40/info.json
+++ b/keyboards/checkerboards/axon40/info.json
@@ -8,6 +8,11 @@
"pid": "0x1119",
"device_version": "0.0.1"
},
+ "matrix_pins": {
+ "cols": ["C7", "B7", "D4", "D6", "F0", "F1", "C6", "B6", "B5", "B4", "E6", "B0"],
+ "rows": ["D2", "D3", "D1", "D5"]
+ },
+ "diode_direction": "COL2ROW",
"processor": "atmega32u4",
"bootloader": "atmel-dfu",
"layouts": {
diff --git a/keyboards/checkerboards/candybar_ortho/config.h b/keyboards/checkerboards/candybar_ortho/config.h
index 966e9c79a5..091065e483 100644
--- a/keyboards/checkerboards/candybar_ortho/config.h
+++ b/keyboards/checkerboards/candybar_ortho/config.h
@@ -16,15 +16,6 @@
#pragma once
-
-/* key matrix pins */
-#define MATRIX_ROW_PINS { B4, D4, D7, D6, B5, B6, C7, C6 }
-#define MATRIX_COL_PINS { F0, F1, F4, F5, F6, F7, D0, D1, D2 }
-
-
-/* COL2ROW or ROW2COL */
-#define DIODE_DIRECTION COL2ROW
-
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
#define LOCKING_SUPPORT_ENABLE
diff --git a/keyboards/checkerboards/candybar_ortho/info.json b/keyboards/checkerboards/candybar_ortho/info.json
index a254f9ef6e..ceadcc42ad 100644
--- a/keyboards/checkerboards/candybar_ortho/info.json
+++ b/keyboards/checkerboards/candybar_ortho/info.json
@@ -8,6 +8,11 @@
"pid": "0x3215",
"device_version": "0.0.1"
},
+ "matrix_pins": {
+ "cols": ["F0", "F1", "F4", "F5", "F6", "F7", "D0", "D1", "D2"],
+ "rows": ["B4", "D4", "D7", "D6", "B5", "B6", "C7", "C6"]
+ },
+ "diode_direction": "COL2ROW",
"processor": "atmega32u4",
"bootloader": "atmel-dfu",
"layouts": {
diff --git a/keyboards/checkerboards/g_idb60/config.h b/keyboards/checkerboards/g_idb60/config.h
index 78a8f5ed63..9b8adff3ec 100644
--- a/keyboards/checkerboards/g_idb60/config.h
+++ b/keyboards/checkerboards/g_idb60/config.h
@@ -17,14 +17,6 @@ Copyright 2021 Nathan Spears
#pragma once
-
-/* key matrix pins */
-#define MATRIX_ROW_PINS { D6, D7, B4, B5, F7 }
-#define MATRIX_COL_PINS { B6, C6, C7, D4, F6, F0, B0, F1, F4, F5, D1, D0, D3, D5 }
-
-/* COL2ROW or ROW2COL */
-#define DIODE_DIRECTION COL2ROW
-
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
#define LOCKING_SUPPORT_ENABLE
diff --git a/keyboards/checkerboards/g_idb60/info.json b/keyboards/checkerboards/g_idb60/info.json
index ff4cc80b5e..3e3b1aaa0b 100644
--- a/keyboards/checkerboards/g_idb60/info.json
+++ b/keyboards/checkerboards/g_idb60/info.json
@@ -8,6 +8,11 @@
"pid": "0x3508",
"device_version": "0.0.1"
},
+ "matrix_pins": {
+ "cols": ["B6", "C6", "C7", "D4", "F6", "F0", "B0", "F1", "F4", "F5", "D1", "D0", "D3", "D5"],
+ "rows": ["D6", "D7", "B4", "B5", "F7"]
+ },
+ "diode_direction": "COL2ROW",
"processor": "atmega32u4",
"bootloader": "atmel-dfu",
"layouts": {
diff --git a/keyboards/checkerboards/nop60/config.h b/keyboards/checkerboards/nop60/config.h
index adf72e2f65..5d3e817aac 100644
--- a/keyboards/checkerboards/nop60/config.h
+++ b/keyboards/checkerboards/nop60/config.h
@@ -17,14 +17,6 @@ Copyright 2021 Nathan Spears
#pragma once
-
-/* key matrix pins */
-#define MATRIX_ROW_PINS { F0, F1, E6, B7, C6 }
-#define MATRIX_COL_PINS { F6, F5, F4, D0, D7, D3, D4, D5, D6, F7, C7, B4, B6, B5 }
-
-/* COL2ROW or ROW2COL */
-#define DIODE_DIRECTION COL2ROW
-
#define BACKLIGHT_PWM_DRIVER PWMD3
// ws2812 options
diff --git a/keyboards/checkerboards/nop60/info.json b/keyboards/checkerboards/nop60/info.json
index 96467b7702..c1d9d31763 100644
--- a/keyboards/checkerboards/nop60/info.json
+++ b/keyboards/checkerboards/nop60/info.json
@@ -8,6 +8,11 @@
"pid": "0x1416",
"device_version": "0.0.1"
},
+ "matrix_pins": {
+ "cols": ["F6", "F5", "F4", "D0", "D7", "D3", "D4", "D5", "D6", "F7", "C7", "B4", "B6", "B5"],
+ "rows": ["F0", "F1", "E6", "B7", "C6"]
+ },
+ "diode_direction": "COL2ROW",
"backlight": {
"pin": "D1",
"levels": 6,
diff --git a/keyboards/checkerboards/phoenix45_ortho/config.h b/keyboards/checkerboards/phoenix45_ortho/config.h
index 8c11a3ccf7..21d76ea1ac 100644
--- a/keyboards/checkerboards/phoenix45_ortho/config.h
+++ b/keyboards/checkerboards/phoenix45_ortho/config.h
@@ -16,14 +16,6 @@
#pragma once
-
-/* key matrix pins */
-#define MATRIX_ROW_PINS { D2, D1, D0, C4 }
-#define MATRIX_COL_PINS { D3, C2, C5, B0, D6, D5, D4, B4, B5, B6, B7, C7, C6 }
-
-/* COL2ROW or ROW2COL */
-#define DIODE_DIRECTION COL2ROW
-
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
#define LOCKING_SUPPORT_ENABLE
diff --git a/keyboards/checkerboards/phoenix45_ortho/info.json b/keyboards/checkerboards/phoenix45_ortho/info.json
index 23f6b024fa..41922cb584 100644
--- a/keyboards/checkerboards/phoenix45_ortho/info.json
+++ b/keyboards/checkerboards/phoenix45_ortho/info.json
@@ -8,6 +8,11 @@
"pid": "0x1849",
"device_version": "0.0.1"
},
+ "matrix_pins": {
+ "cols": ["D3", "C2", "C5", "B0", "D6", "D5", "D4", "B4", "B5", "B6", "B7", "C7", "C6"],
+ "rows": ["D2", "D1", "D0", "C4"]
+ },
+ "diode_direction": "COL2ROW",
"encoder": {
"rotary": [
{"pin_a": "B1", "pin_b": "B2"}
diff --git a/keyboards/checkerboards/plexus75/config.h b/keyboards/checkerboards/plexus75/config.h
index 0d8e9404e2..f365fe865a 100644
--- a/keyboards/checkerboards/plexus75/config.h
+++ b/keyboards/checkerboards/plexus75/config.h
@@ -16,13 +16,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
#pragma once
-
-#define MATRIX_ROW_PINS { D2, B3, B1, F1, F0 }
-#define MATRIX_COL_PINS { B2, B0, D1, F7, F6, F5, F4, D4, D6, D7, B4, B5, B6, C6, C7 }
-
-/* COL2ROW, ROW2COL */
-#define DIODE_DIRECTION COL2ROW
-
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
#define LOCKING_SUPPORT_ENABLE
/* Locking resynchronize hack */
diff --git a/keyboards/checkerboards/plexus75/info.json b/keyboards/checkerboards/plexus75/info.json
index 87d2e74deb..92739951f8 100644
--- a/keyboards/checkerboards/plexus75/info.json
+++ b/keyboards/checkerboards/plexus75/info.json
@@ -8,6 +8,11 @@
"pid": "0x5338",
"device_version": "0.0.1"
},
+ "matrix_pins": {
+ "cols": ["B2", "B0", "D1", "F7", "F6", "F5", "F4", "D4", "D6", "D7", "B4", "B5", "B6", "C6", "C7"],
+ "rows": ["D2", "B3", "B1", "F1", "F0"]
+ },
+ "diode_direction": "COL2ROW",
"processor": "atmega32u4",
"bootloader": "atmel-dfu",
"layouts": {
diff --git a/keyboards/checkerboards/plexus75_he/config.h b/keyboards/checkerboards/plexus75_he/config.h
index f8ccc0e356..04b03054f1 100644
--- a/keyboards/checkerboards/plexus75_he/config.h
+++ b/keyboards/checkerboards/plexus75_he/config.h
@@ -16,14 +16,6 @@
#pragma once
-
-/* key matrix pins */
-#define MATRIX_ROW_PINS { C2, D0, D1, D2, D6, B0, B3, B2, C6, B1 }
-#define MATRIX_COL_PINS { C4, C5, D3, C7, B7, B6, B5, B4 }
-
-/* COL2ROW or ROW2COL */
-#define DIODE_DIRECTION COL2ROW
-
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
#define LOCKING_SUPPORT_ENABLE
diff --git a/keyboards/checkerboards/plexus75_he/info.json b/keyboards/checkerboards/plexus75_he/info.json
index dbac1f2f6a..d977b2f5a9 100644
--- a/keyboards/checkerboards/plexus75_he/info.json
+++ b/keyboards/checkerboards/plexus75_he/info.json
@@ -8,6 +8,11 @@
"pid": "0x5339",
"device_version": "0.0.1"
},
+ "matrix_pins": {
+ "cols": ["C4", "C5", "D3", "C7", "B7", "B6", "B5", "B4"],
+ "rows": ["C2", "D0", "D1", "D2", "D6", "B0", "B3", "B2", "C6", "B1"]
+ },
+ "diode_direction": "COL2ROW",
"processor": "atmega32u2",
"bootloader": "atmel-dfu",
"layouts": {
diff --git a/keyboards/checkerboards/pursuit40/config.h b/keyboards/checkerboards/pursuit40/config.h
index cec9db65e9..e60a7e4d0c 100644
--- a/keyboards/checkerboards/pursuit40/config.h
+++ b/keyboards/checkerboards/pursuit40/config.h
@@ -16,14 +16,6 @@
#pragma once
-
-/* key matrix pins */
-#define MATRIX_ROW_PINS { D2, D1, F4, F5 }
-#define MATRIX_COL_PINS { F1, E6, B7, D5, D4, D6, D7, B4, B5, B6, C6, C7 }
-
-/* COL2ROW or ROW2COL */
-#define DIODE_DIRECTION COL2ROW
-
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
#define LOCKING_SUPPORT_ENABLE
diff --git a/keyboards/checkerboards/pursuit40/info.json b/keyboards/checkerboards/pursuit40/info.json
index f9915cdf19..81988112a9 100644
--- a/keyboards/checkerboards/pursuit40/info.json
+++ b/keyboards/checkerboards/pursuit40/info.json
@@ -8,6 +8,11 @@
"pid": "0x1620",
"device_version": "0.0.1"
},
+ "matrix_pins": {
+ "cols": ["F1", "E6", "B7", "D5", "D4", "D6", "D7", "B4", "B5", "B6", "C6", "C7"],
+ "rows": ["D2", "D1", "F4", "F5"]
+ },
+ "diode_direction": "COL2ROW",
"processor": "atmega32u4",
"bootloader": "atmel-dfu",
"layouts": {
diff --git a/keyboards/checkerboards/quark/config.h b/keyboards/checkerboards/quark/config.h
index 42ccb06300..1cf03ae980 100644
--- a/keyboards/checkerboards/quark/config.h
+++ b/keyboards/checkerboards/quark/config.h
@@ -16,14 +16,6 @@
#pragma once
-
-/* key matrix pins */
-#define MATRIX_ROW_PINS { C5, C4, C6, C7, B7 }
-#define MATRIX_COL_PINS { B4, B5, B6, B3, C2, B2, D6, D2, D3, D4, D5, B1 }
-
-/* COL2ROW or ROW2COL */
-#define DIODE_DIRECTION COL2ROW
-
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
#define LOCKING_SUPPORT_ENABLE
diff --git a/keyboards/checkerboards/quark/info.json b/keyboards/checkerboards/quark/info.json
index 0f7f3b0f44..ba624b4009 100644
--- a/keyboards/checkerboards/quark/info.json
+++ b/keyboards/checkerboards/quark/info.json
@@ -8,6 +8,11 @@
"pid": "0x5340",
"device_version": "0.0.1"
},
+ "matrix_pins": {
+ "cols": ["B4", "B5", "B6", "B3", "C2", "B2", "D6", "D2", "D3", "D4", "D5", "B1"],
+ "rows": ["C5", "C4", "C6", "C7", "B7"]
+ },
+ "diode_direction": "COL2ROW",
"encoder": {
"rotary": [
{"pin_a": "B0", "pin_b": "D1"}
diff --git a/keyboards/checkerboards/quark_lp/config.h b/keyboards/checkerboards/quark_lp/config.h
index 89fc05ed71..ff88273648 100644
--- a/keyboards/checkerboards/quark_lp/config.h
+++ b/keyboards/checkerboards/quark_lp/config.h
@@ -16,13 +16,6 @@
#pragma once
-/* key matrix pins */
-#define MATRIX_ROW_PINS { C5, C4, C6, C7 }
-#define MATRIX_COL_PINS { B6, B5, B4, B3, B0, D6, D5, D4, D3, D2, D1, D0 }
-
-/* COL2ROW or ROW2COL */
-#define DIODE_DIRECTION COL2ROW
-
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
#define LOCKING_SUPPORT_ENABLE
diff --git a/keyboards/checkerboards/quark_lp/info.json b/keyboards/checkerboards/quark_lp/info.json
index 6cd764fa80..d449a5a46b 100644
--- a/keyboards/checkerboards/quark_lp/info.json
+++ b/keyboards/checkerboards/quark_lp/info.json
@@ -8,6 +8,11 @@
"pid": "0x5354",
"device_version": "0.0.1"
},
+ "matrix_pins": {
+ "cols": ["B6", "B5", "B4", "B3", "B0", "D6", "D5", "D4", "D3", "D2", "D1", "D0"],
+ "rows": ["C5", "C4", "C6", "C7"]
+ },
+ "diode_direction": "COL2ROW",
"processor": "atmega32u2",
"bootloader": "atmel-dfu",
"layouts": {
diff --git a/keyboards/checkerboards/quark_plus/config.h b/keyboards/checkerboards/quark_plus/config.h
index 69781c0fa2..319f588aa2 100644
--- a/keyboards/checkerboards/quark_plus/config.h
+++ b/keyboards/checkerboards/quark_plus/config.h
@@ -16,14 +16,6 @@
#pragma once
-
-/* key matrix pins */
-#define MATRIX_ROW_PINS { B4, B1, C2, D0, D6, B0, B6, B5 }
-#define MATRIX_COL_PINS { C6, D1, D5, D4, D3, D2 }
-
-/* COL2ROW or ROW2COL */
-#define DIODE_DIRECTION COL2ROW
-
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
#define LOCKING_SUPPORT_ENABLE
diff --git a/keyboards/checkerboards/quark_plus/info.json b/keyboards/checkerboards/quark_plus/info.json
index 49ab42adcb..37360618b5 100644
--- a/keyboards/checkerboards/quark_plus/info.json
+++ b/keyboards/checkerboards/quark_plus/info.json
@@ -8,6 +8,11 @@
"pid": "0x5344",
"device_version": "0.0.1"
},
+ "matrix_pins": {
+ "cols": ["C6", "D1", "D5", "D4", "D3", "D2"],
+ "rows": ["B4", "B1", "C2", "D0", "D6", "B0", "B6", "B5"]
+ },
+ "diode_direction": "COL2ROW",
"encoder": {
"rotary": [
{"pin_a": "C7", "pin_b": "B7"},
diff --git a/keyboards/checkerboards/quark_squared/config.h b/keyboards/checkerboards/quark_squared/config.h
index 85bed28b45..de0e84aa33 100644
--- a/keyboards/checkerboards/quark_squared/config.h
+++ b/keyboards/checkerboards/quark_squared/config.h
@@ -16,14 +16,6 @@
#pragma once
-
-/* key matrix pins */
-#define MATRIX_ROW_PINS { C5, C4, C6, C7, B7 }
-#define MATRIX_COL_PINS { B4, B5, B6, B3, C2, B2, D6, D2, D3, D4, D5, B1 }
-
-/* COL2ROW or ROW2COL */
-#define DIODE_DIRECTION COL2ROW
-
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
#define LOCKING_SUPPORT_ENABLE
diff --git a/keyboards/checkerboards/quark_squared/info.json b/keyboards/checkerboards/quark_squared/info.json
index de8496a798..46bfedda21 100644
--- a/keyboards/checkerboards/quark_squared/info.json
+++ b/keyboards/checkerboards/quark_squared/info.json
@@ -8,6 +8,11 @@
"pid": "0x5342",
"device_version": "0.0.1"
},
+ "matrix_pins": {
+ "cols": ["B4", "B5", "B6", "B3", "C2", "B2", "D6", "D2", "D3", "D4", "D5", "B1"],
+ "rows": ["C5", "C4", "C6", "C7", "B7"]
+ },
+ "diode_direction": "COL2ROW",
"encoder": {
"rotary": [
{"pin_a": "B0", "pin_b": "D1"}
diff --git a/keyboards/checkerboards/snop60/config.h b/keyboards/checkerboards/snop60/config.h
index 5015355170..4ef42eeb79 100644
--- a/keyboards/checkerboards/snop60/config.h
+++ b/keyboards/checkerboards/snop60/config.h
@@ -17,14 +17,6 @@ Copyright 2022 Nathan Spears
#pragma once
-
-/* key matrix pins */
-#define MATRIX_ROW_PINS { B7, D0, D6, B4, B5 }
-#define MATRIX_COL_PINS { B6, C6, C7, D5, F7, F6, F5, F4, F1, F0, B0, E6, D4, D7 }
-
-/* COL2ROW or ROW2COL */
-#define DIODE_DIRECTION COL2ROW
-
// ws2812 options
#define RGB_DI_PIN B1 // pin the DI on the ws2812 is hooked-up to
#define RGBLIGHT_EFFECT_BREATHING
diff --git a/keyboards/checkerboards/snop60/info.json b/keyboards/checkerboards/snop60/info.json
index 0c543a7c85..0d5392f073 100644
--- a/keyboards/checkerboards/snop60/info.json
+++ b/keyboards/checkerboards/snop60/info.json
@@ -8,6 +8,11 @@
"pid": "0x2416",
"device_version": "0.0.1"
},
+ "matrix_pins": {
+ "cols": ["B6", "C6", "C7", "D5", "F7", "F6", "F5", "F4", "F1", "F0", "B0", "E6", "D4", "D7"],
+ "rows": ["B7", "D0", "D6", "B4", "B5"]
+ },
+ "diode_direction": "COL2ROW",
"encoder": {
"rotary": [
{"pin_a": "D2", "pin_b": "D3"}
diff --git a/keyboards/checkerboards/ud40_ortho_alt/config.h b/keyboards/checkerboards/ud40_ortho_alt/config.h
index 76fe9ae327..309d6ccf54 100644
--- a/keyboards/checkerboards/ud40_ortho_alt/config.h
+++ b/keyboards/checkerboards/ud40_ortho_alt/config.h
@@ -16,14 +16,6 @@
#pragma once
-
-/* key matrix pins */
-#define MATRIX_ROW_PINS { E6, F0, F1, F4 }
-#define MATRIX_COL_PINS { B2, B1, F7, D6, D7, B4, B5, B6, C6, C7, F5, F6 }
-
-/* COL2ROW or ROW2COL */
-#define DIODE_DIRECTION COL2ROW
-
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
#define LOCKING_SUPPORT_ENABLE
diff --git a/keyboards/checkerboards/ud40_ortho_alt/info.json b/keyboards/checkerboards/ud40_ortho_alt/info.json
index fa72a206d3..701f129163 100644
--- a/keyboards/checkerboards/ud40_ortho_alt/info.json
+++ b/keyboards/checkerboards/ud40_ortho_alt/info.json
@@ -8,6 +8,11 @@
"pid": "0x7030",
"device_version": "0.0.1"
},
+ "matrix_pins": {
+ "cols": ["B2", "B1", "F7", "D6", "D7", "B4", "B5", "B6", "C6", "C7", "F5", "F6"],
+ "rows": ["E6", "F0", "F1", "F4"]
+ },
+ "diode_direction": "COL2ROW",
"processor": "atmega32u4",
"bootloader": "atmel-dfu",
"layouts": {
diff --git a/keyboards/cherrybstudio/cb1800/config.h b/keyboards/cherrybstudio/cb1800/config.h
index cc6d24ebc1..fbd6d0e2fd 100644
--- a/keyboards/cherrybstudio/cb1800/config.h
+++ b/keyboards/cherrybstudio/cb1800/config.h
@@ -13,24 +13,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
#pragma once
-
-/*
- * Keyboard Matrix Assignments
- *
- * Change this to how you wired your keyboard
- * COLS: AVR pins used for columns, left to right
- * ROWS: AVR pins used for rows, top to bottom
- * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
- * ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
- *
- * 0 1 2 3 4 5 6 7 8 9
-*/
-#define MATRIX_ROW_PINS { B0, B1, B2, B3, B4, B5, B6, B7, C6, C7 }
-#define MATRIX_COL_PINS { D0, D1, D2, D3, D4, D5, D6, D7, F0, F1, F4 }
-
-/* COL2ROW, ROW2COL*/
-#define DIODE_DIRECTION COL2ROW
-
#define RGB_DI_PIN E6
#ifdef RGB_DI_PIN
# define RGBLIGHT_EFFECT_BREATHING
diff --git a/keyboards/cherrybstudio/cb1800/info.json b/keyboards/cherrybstudio/cb1800/info.json
index 8d96a17bcc..ade4585e42 100644
--- a/keyboards/cherrybstudio/cb1800/info.json
+++ b/keyboards/cherrybstudio/cb1800/info.json
@@ -8,6 +8,11 @@
"pid": "0x1818",
"device_version": "0.0.1"
},
+ "matrix_pins": {
+ "cols": ["D0", "D1", "D2", "D3", "D4", "D5", "D6", "D7", "F0", "F1", "F4"],
+ "rows": ["B0", "B1", "B2", "B3", "B4", "B5", "B6", "B7", "C6", "C7"]
+ },
+ "diode_direction": "COL2ROW",
"indicators": {
"caps_lock": "F5",
"num_lock": "F6",
diff --git a/keyboards/cherrybstudio/cb65/config.h b/keyboards/cherrybstudio/cb65/config.h
index b298fec8dc..6251ae58ef 100644
--- a/keyboards/cherrybstudio/cb65/config.h
+++ b/keyboards/cherrybstudio/cb65/config.h
@@ -13,24 +13,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
#pragma once
-
-/*
- * Keyboard Matrix Assignments
- *
- * Change this to how you wired your keyboard
- * COLS: AVR pins used for columns, left to right
- * ROWS: AVR pins used for rows, top to bottom
- * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
- * ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
- *
- * 0 1 2 3 4 5 6 7 8
-*/
-#define MATRIX_ROW_PINS { B0, B1, B2, B3, B7, D0, D1, D2, D3 }
-#define MATRIX_COL_PINS { D5, D4, D6, D7, F7, B5, B6, C6 }
-
-/* COL2ROW, ROW2COL*/
-#define DIODE_DIRECTION COL2ROW
-
/* RGB Lighting */
#define RGB_DI_PIN F0
#ifdef RGB_DI_PIN
diff --git a/keyboards/cherrybstudio/cb65/info.json b/keyboards/cherrybstudio/cb65/info.json
index 223d5560d4..6f29ae1dfd 100644
--- a/keyboards/cherrybstudio/cb65/info.json
+++ b/keyboards/cherrybstudio/cb65/info.json
@@ -8,6 +8,11 @@
"pid": "0x6565",
"device_version": "0.0.1"
},
+ "matrix_pins": {
+ "cols": ["D5", "D4", "D6", "D7", "F7", "B5", "B6", "C6"],
+ "rows": ["B0", "B1", "B2", "B3", "B7", "D0", "D1", "D2", "D3"]
+ },
+ "diode_direction": "COL2ROW",
"indicators": {
"caps_lock": "F1",
"scroll_lock": "F4",
diff --git a/keyboards/cherrybstudio/cb87/config.h b/keyboards/cherrybstudio/cb87/config.h
index f78600ed04..2d7e2722e5 100644
--- a/keyboards/cherrybstudio/cb87/config.h
+++ b/keyboards/cherrybstudio/cb87/config.h
@@ -13,24 +13,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
#pragma once
-
-/*
- * Keyboard Matrix Assignments
- *
- * Change this to how you wired your keyboard
- * COLS: AVR pins used for columns, left to right
- * ROWS: AVR pins used for rows, top to bottom
- * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
- * ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
- *
- * 0 1 2 3 4 5 6 7 8 9
-*/
-#define MATRIX_ROW_PINS { B0, B1, B2, B3, B7, D0, D1, D2, D3 }
-#define MATRIX_COL_PINS { D5, D4, D6, D7, B4, B5, F5, C6, C7, F7 }
-
-/* COL2ROW, ROW2COL*/
-#define DIODE_DIRECTION COL2ROW
-
#define RGB_DI_PIN E6
#ifdef RGB_DI_PIN
#define RGBLIGHT_EFFECT_BREATHING
diff --git a/keyboards/cherrybstudio/cb87/info.json b/keyboards/cherrybstudio/cb87/info.json
index 09a4fe132a..4f64388126 100644
--- a/keyboards/cherrybstudio/cb87/info.json
+++ b/keyboards/cherrybstudio/cb87/info.json
@@ -8,6 +8,11 @@
"pid": "0x8787",
"device_version": "0.0.1"
},
+ "matrix_pins": {
+ "cols": ["D5", "D4", "D6", "D7", "B4", "B5", "F5", "C6", "C7", "F7"],
+ "rows": ["B0", "B1", "B2", "B3", "B7", "D0", "D1", "D2", "D3"]
+ },
+ "diode_direction": "COL2ROW",
"backlight": {
"pin": "B6"
},
diff --git a/keyboards/cherrybstudio/cb87rgb/config.h b/keyboards/cherrybstudio/cb87rgb/config.h
index eedd4de339..750ca2634c 100644
--- a/keyboards/cherrybstudio/cb87rgb/config.h
+++ b/keyboards/cherrybstudio/cb87rgb/config.h
@@ -13,24 +13,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
#pragma once
-
-/*
- * Keyboard Matrix Assignments
- *
- * Change this to how you wired your keyboard
- * COLS: AVR pins used for columns, left to right
- * ROWS: AVR pins used for rows, top to bottom
- * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
- * ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
- *
- * 0 1 2 3 4 5 6 7 8 9
-*/
-#define MATRIX_ROW_PINS { B0, B1, B2, B3, B7, D0, D1, D2, D3, F6 }
-#define MATRIX_COL_PINS { D5, D4, D6, D7, B4, B5, F5, C6, C7, F7 }
-
-/* COL2ROW, ROW2COL*/
-#define DIODE_DIRECTION COL2ROW
-
#define RGB_DI_PIN E6
#define RGB_MATRIX_LED_COUNT 92
#define RGB_DISABLE_WHEN_USB_SUSPENDED
diff --git a/keyboards/cherrybstudio/cb87rgb/info.json b/keyboards/cherrybstudio/cb87rgb/info.json
index 059b6d61d4..5e93754cfc 100644
--- a/keyboards/cherrybstudio/cb87rgb/info.json
+++ b/keyboards/cherrybstudio/cb87rgb/info.json
@@ -8,6 +8,11 @@
"pid": "0x8785",
"device_version": "0.0.1"
},
+ "matrix_pins": {
+ "cols": ["D5", "D4", "D6", "D7", "B4", "B5", "F5", "C6", "C7", "F7"],
+ "rows": ["B0", "B1", "B2", "B3", "B7", "D0", "D1", "D2", "D3", "F6"]
+ },
+ "diode_direction": "COL2ROW",
"processor": "atmega32u4",
"bootloader": "atmel-dfu",
"layouts": {
diff --git a/keyboards/cherrybstudio/cb87v2/config.h b/keyboards/cherrybstudio/cb87v2/config.h
index 55b8bc4bee..03549bc495 100644
--- a/keyboards/cherrybstudio/cb87v2/config.h
+++ b/keyboards/cherrybstudio/cb87v2/config.h
@@ -13,24 +13,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
#pragma once
-
-/*
- * Keyboard Matrix Assignments
- *
- * Change this to how you wired your keyboard
- * COLS: AVR pins used for columns, left to right
- * ROWS: AVR pins used for rows, top to bottom
- * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
- * ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
- *
- * 0 1 2 3 4 5 6 7 8 9
-*/
-#define MATRIX_ROW_PINS { B0, B1, B2, B3, B7, D0, D1, D2, D3, F6 }
-#define MATRIX_COL_PINS { D5, D4, D6, D7, B4, B5, F5, C6, C7, F7 }
-
-/* COL2ROW, ROW2COL*/
-#define DIODE_DIRECTION COL2ROW
-
#define RGB_DI_PIN E6
#ifdef RGB_DI_PIN
#define RGBLIGHT_EFFECT_BREATHING
diff --git a/keyboards/cherrybstudio/cb87v2/info.json b/keyboards/cherrybstudio/cb87v2/info.json
index 45aea95248..8e7720928d 100644
--- a/keyboards/cherrybstudio/cb87v2/info.json
+++ b/keyboards/cherrybstudio/cb87v2/info.json
@@ -8,6 +8,11 @@
"pid": "0x8788",
"device_version": "0.0.1"
},
+ "matrix_pins": {
+ "cols": ["D5", "D4", "D6", "D7", "B4", "B5", "F5", "C6", "C7", "F7"],
+ "rows": ["B0", "B1", "B2", "B3", "B7", "D0", "D1", "D2", "D3", "F6"]
+ },
+ "diode_direction": "COL2ROW",
"backlight": {
"pin": "B6"
},
diff --git a/keyboards/cheshire/curiosity/config.h b/keyboards/cheshire/curiosity/config.h
index 8c60236697..d93e66215b 100644
--- a/keyboards/cheshire/curiosity/config.h
+++ b/keyboards/cheshire/curiosity/config.h
@@ -17,12 +17,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
#pragma once
-
-#define MATRIX_ROW_PINS { B13, B14, A4, A2, A1 }
-#define MATRIX_COL_PINS { B11, B10, B2, B1, B0, A7, A6, A5, B9, B8, B7, B6, B5, B4, B3, A15 }
-
-#define DIODE_DIRECTION COL2ROW
-
#define RGB_DI_PIN B15
#define RGBLED_NUM 14
diff --git a/keyboards/cheshire/curiosity/info.json b/keyboards/cheshire/curiosity/info.json
index 0e63e3b660..854b10890b 100644
--- a/keyboards/cheshire/curiosity/info.json
+++ b/keyboards/cheshire/curiosity/info.json
@@ -7,6 +7,11 @@
"pid": "0x0FAD",
"device_version": "0.0.1"
},
+ "matrix_pins": {
+ "cols": ["B11", "B10", "B2", "B1", "B0", "A7", "A6", "A5", "B9", "B8", "B7", "B6", "B5", "B4", "B3", "A15"],
+ "rows": ["B13", "B14", "A4", "A2", "A1"]
+ },
+ "diode_direction": "COL2ROW",
"processor": "STM32F072",
"bootloader": "stm32-dfu",
"community_layouts": ["alice", "alice_split_bs"],
diff --git a/keyboards/chickenman/ciel/config.h b/keyboards/chickenman/ciel/config.h
index c2cae71086..2a4bb26963 100644
--- a/keyboards/chickenman/ciel/config.h
+++ b/keyboards/chickenman/ciel/config.h
@@ -17,23 +17,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
#pragma once
-
-/*
- * Keyboard Matrix Assignments
- *
- * Change this to how you wired your keyboard
- * COLS: AVR pins used for columns, left to right
- * ROWS: AVR pins used for rows, top to bottom
- * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
- * ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
- *
- */
-#define MATRIX_ROW_PINS { C5, C4, B0, C7, B7 }
-#define MATRIX_COL_PINS { C6, B6, B5, B4, B3, B2, B1, D6, D5, D4, D3, D2, D1, D0, C2 }
-
-/* COL2ROW, ROW2COL */
-#define DIODE_DIRECTION COL2ROW
-
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
#define LOCKING_SUPPORT_ENABLE
/* Locking resynchronize hack */
diff --git a/keyboards/chickenman/ciel/info.json b/keyboards/chickenman/ciel/info.json
index b6a4f5e8f7..af2684d993 100644
--- a/keyboards/chickenman/ciel/info.json
+++ b/keyboards/chickenman/ciel/info.json
@@ -8,6 +8,11 @@
"pid": "0x0001",
"device_version": "0.0.1"
},
+ "matrix_pins": {
+ "cols": ["C6", "B6", "B5", "B4", "B3", "B2", "B1", "D6", "D5", "D4", "D3", "D2", "D1", "D0", "C2"],
+ "rows": ["C5", "C4", "B0", "C7", "B7"]
+ },
+ "diode_direction": "COL2ROW",
"processor": "atmega32u2",
"bootloader": "atmel-dfu",
"community_layouts": ["60_ansi_split_bs_rshift", "60_ansi", "60_tsangan_hhkb"],
diff --git a/keyboards/chlx/merro60/config.h b/keyboards/chlx/merro60/config.h
index f9f0068b16..18198a8bce 100644
--- a/keyboards/chlx/merro60/config.h
+++ b/keyboards/chlx/merro60/config.h
@@ -17,22 +17,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
#pragma once
-/*
- * Keyboard Matrix Assignments
- *
- * Change this to how you wired your keyboard
- * COLS: AVR pins used for columns, left to right
- * ROWS: AVR pins used for rows, top to bottom
- * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
- * ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
- *
- */
-#define MATRIX_ROW_PINS { D4, D5, D3, B5, F4 }
-#define MATRIX_COL_PINS { B7, D1, D0, B0, B1, E6, B2, B3, D2, D7, B4, B6, C6, C7, D6 }
-
-/* COL2ROW, ROW2COL*/
-#define DIODE_DIRECTION COL2ROW
-
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
#define LOCKING_SUPPORT_ENABLE
/* Locking resynchronize hack */
diff --git a/keyboards/chlx/merro60/info.json b/keyboards/chlx/merro60/info.json
index bbb3124868..99308fecde 100644
--- a/keyboards/chlx/merro60/info.json
+++ b/keyboards/chlx/merro60/info.json
@@ -8,6 +8,11 @@
"pid": "0x0601",
"device_version": "1.0.0"
},
+ "matrix_pins": {
+ "cols": ["B7", "D1", "D0", "B0", "B1", "E6", "B2", "B3", "D2", "D7", "B4", "B6", "C6", "C7", "D6"],
+ "rows": ["D4", "D5", "D3", "B5", "F4"]
+ },
+ "diode_direction": "COL2ROW",
"processor": "atmega32u4",
"bootloader": "atmel-dfu",
"layout_aliases": {
diff --git a/keyboards/chlx/str_merro60/config.h b/keyboards/chlx/str_merro60/config.h
index 731309b6fa..5a54a2ab89 100644
--- a/keyboards/chlx/str_merro60/config.h
+++ b/keyboards/chlx/str_merro60/config.h
@@ -17,23 +17,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
#pragma once
-
-/*
- * Keyboard Matrix Assignments
- *
- * Change this to how you wired your keyboard
- * COLS: AVR pins used for columns, left to right
- * ROWS: AVR pins used for rows, top to bottom
- * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
- * ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
- *
- */
-#define MATRIX_ROW_PINS { C6, C7, F7, F6, F5, F4, F1, F0, B3, B7 }
-#define MATRIX_COL_PINS { D0, D1, D2, E6, B0, B1, B2 }
-
-/* COL2ROW, ROW2COL*/
-#define DIODE_DIRECTION ROW2COL
-
#define RGB_DI_PIN D3
#ifdef RGB_DI_PIN
# define RGBLIGHT_EFFECT_BREATHING
diff --git a/keyboards/chlx/str_merro60/info.json b/keyboards/chlx/str_merro60/info.json
index e9ab25aedb..20f8eb6681 100644
--- a/keyboards/chlx/str_merro60/info.json
+++ b/keyboards/chlx/str_merro60/info.json
@@ -8,6 +8,11 @@
"pid": "0x0602",
"device_version": "1.0.0"
},
+ "matrix_pins": {
+ "cols": ["D0", "D1", "D2", "E6", "B0", "B1", "B2"],
+ "rows": ["C6", "C7", "F7", "F6", "F5", "F4", "F1", "F0", "B3", "B7"]
+ },
+ "diode_direction": "ROW2COL",
"processor": "atmega32u4",
"bootloader": "atmel-dfu",
"layout_aliases": {
diff --git a/keyboards/chocofly/v1/config.h b/keyboards/chocofly/v1/config.h
deleted file mode 100644
index a1886ffafa..0000000000
--- a/keyboards/chocofly/v1/config.h
+++ /dev/null
@@ -1,9 +0,0 @@
-// Copyright 2022 Vitaly Volkov (@vlkv)
-// SPDX-License-Identifier: GPL-2.0-or-later
-
-#pragma once
-
-#define MATRIX_ROW_PINS { D1, D0, D4, C6, D7, E6, B4, B5 }
-#define MATRIX_COL_PINS { F4, F5, F6, F7, B1, B3, B2, B6 }
-
-#define DIODE_DIRECTION COL2ROW
diff --git a/keyboards/chocofly/v1/info.json b/keyboards/chocofly/v1/info.json
index ab4fde45e6..e7578ae942 100644
--- a/keyboards/chocofly/v1/info.json
+++ b/keyboards/chocofly/v1/info.json
@@ -8,6 +8,11 @@
"pid": "0x1001",
"device_version": "0.0.1"
},
+ "matrix_pins": {
+ "cols": ["F4", "F5", "F6", "F7", "B1", "B3", "B2", "B6"],
+ "rows": ["D1", "D0", "D4", "C6", "D7", "E6", "B4", "B5"]
+ },
+ "diode_direction": "COL2ROW",
"encoder": {
"rotary": [
{"pin_a": "D3", "pin_b": "D2", "resolution": 2}
diff --git a/keyboards/chocv/config.h b/keyboards/chocv/config.h
deleted file mode 100644
index 5d61c7d4d7..0000000000
--- a/keyboards/chocv/config.h
+++ /dev/null
@@ -1,24 +0,0 @@
-/* Copyright 2021 BrickBots Labs
- *
- * This program is free software: you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation, either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program. If not, see <http://www.gnu.org/licenses/>.
- */
-
- #pragma once
-
-
- #define MATRIX_ROW_PINS { F4, F5, D1, D0 }
- #define MATRIX_COL_PINS { B6, B2, B3, B1, F7, C6, D7, E6, B4, B5}
-
- /* COL2ROW, ROW2COL*/
- #define DIODE_DIRECTION COL2ROW
diff --git a/keyboards/chocv/info.json b/keyboards/chocv/info.json
index ce82fd6e44..16ba0fe4d2 100644
--- a/keyboards/chocv/info.json
+++ b/keyboards/chocv/info.json
@@ -8,6 +8,11 @@
"pid": "0x0002",
"device_version": "0.0.1"
},
+ "matrix_pins": {
+ "cols": ["B6", "B2", "B3", "B1", "F7", "C6", "D7", "E6", "B4", "B5"],
+ "rows": ["F4", "F5", "D1", "D0"]
+ },
+ "diode_direction": "COL2ROW",
"processor": "atmega32u4",
"bootloader": "qmk-dfu",
"community_layouts": ["split_3x5_3"],
diff --git a/keyboards/cipulot/kallos/config.h b/keyboards/cipulot/kallos/config.h
index 66140bc3ed..62e682cd0c 100644
--- a/keyboards/cipulot/kallos/config.h
+++ b/keyboards/cipulot/kallos/config.h
@@ -17,16 +17,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
#pragma once
-
-/* Keyboard Matrix Assignments */
-#define MATRIX_ROW_PINS \
- { B3, B2, F0, C7, F4, F1 }
-#define MATRIX_COL_PINS \
- { F5, F6, C6, B6, B5, B4, D7, D6, D4, D5, D3, F7, D2, D1, B7 }
-
-/* COL2ROW, ROW2COL */
-#define DIODE_DIRECTION COL2ROW
-
/* Lightbar pin and LED count definitions*/
#define RGB_DI_PIN D0
#define RGBLED_NUM 13
diff --git a/keyboards/cipulot/kallos/info.json b/keyboards/cipulot/kallos/info.json
index 1295d76e7f..a0e9aefe17 100644
--- a/keyboards/cipulot/kallos/info.json
+++ b/keyboards/cipulot/kallos/info.json
@@ -8,6 +8,11 @@
"pid": "0x6B7A",
"device_version": "0.0.1"
},
+ "matrix_pins": {
+ "cols": ["F5", "F6", "C6", "B6", "B5", "B4", "D7", "D6", "D4", "D5", "D3", "F7", "D2", "D1", "B7"],
+ "rows": ["B3", "B2", "F0", "C7", "F4", "F1"]
+ },
+ "diode_direction": "COL2ROW",
"processor": "atmega32u4",
"bootloader": "atmel-dfu",
"layouts": {
diff --git a/keyboards/cipulot/kawayo/config.h b/keyboards/cipulot/kawayo/config.h
index 1a9b80ee58..a87365e69d 100644
--- a/keyboards/cipulot/kawayo/config.h
+++ b/keyboards/cipulot/kawayo/config.h
@@ -16,14 +16,6 @@
#pragma once
-#define MATRIX_ROW_PINS \
- { B1, B12, C13, A7, B0 }
-#define MATRIX_COL_PINS \
- { B10, A0, B9, B8, B7, B6, B5, B4, B3, A15, A14, A4, A3, A2, A1 }
-
-/* COL2ROW, ROW2COL */
-#define DIODE_DIRECTION COL2ROW
-
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
#define LOCKING_SUPPORT_ENABLE
/* Locking resynchronize hack */
diff --git a/keyboards/cipulot/kawayo/info.json b/keyboards/cipulot/kawayo/info.json
index f335b2b76c..317149fa67 100644
--- a/keyboards/cipulot/kawayo/info.json
+++ b/keyboards/cipulot/kawayo/info.json
@@ -8,6 +8,11 @@
"pid": "0x6B7F",
"device_version": "0.0.1"
},
+ "matrix_pins": {
+ "cols": ["B10", "A0", "B9", "B8", "B7", "B6", "B5", "B4", "B3", "A15", "A14", "A4", "A3", "A2", "A1"],
+ "rows": ["B1", "B12", "C13", "A7", "B0"]
+ },
+ "diode_direction": "COL2ROW",
"processor": "STM32F411",
"bootloader": "stm32-dfu",
"layout_aliases": {
diff --git a/keyboards/ck60i/config.h b/keyboards/ck60i/config.h
index 908eb0d188..1304a2fe31 100644
--- a/keyboards/ck60i/config.h
+++ b/keyboards/ck60i/config.h
@@ -17,10 +17,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
#pragma once
-#define MATRIX_COL_PINS { B12, A2 , A1 , A0 , F1 , F0 , B11, B10, B2 , B1 , B0 , A7 , C15, C14}
-#define MATRIX_ROW_PINS { B9 , C13, A3 , B14, A8}
-#define DIODE_DIRECTION COL2ROW
-
#define BACKLIGHT_PWM_DRIVER PWMD3
#define BACKLIGHT_PWM_CHANNEL 1
#define BACKLIGHT_PAL_MODE 1
diff --git a/keyboards/ck60i/info.json b/keyboards/ck60i/info.json
index 22e8f265f6..d99757f19b 100644
--- a/keyboards/ck60i/info.json
+++ b/keyboards/ck60i/info.json
@@ -8,6 +8,11 @@
"pid": "0x6049",
"device_version": "0.0.1"
},
+ "matrix_pins": {
+ "cols": ["B12", "A2", "A1", "A0", "F1", "F0", "B11", "B10", "B2", "B1", "B0", "A7", "C15", "C14"],
+ "rows": ["B9", "C13", "A3", "B14", "A8"]
+ },
+ "diode_direction": "COL2ROW",
"encoder": {
"rotary": [
{"pin_a": "A5", "pin_b": "A4"}
diff --git a/keyboards/ckeys/handwire_101/config.h b/keyboards/ckeys/handwire_101/config.h
index 791c68f739..95780766c5 100755
--- a/keyboards/ckeys/handwire_101/config.h
+++ b/keyboards/ckeys/handwire_101/config.h
@@ -17,23 +17,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
#pragma once
-
-/*
- * Keyboard Matrix Assignments
- *
- * Change this to how you wired your keyboard
- * COLS: AVR pins used for columns, left to right
- * ROWS: AVR pins used for rows, top to bottom
- * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
- * ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
- *
-*/
-#define MATRIX_ROW_PINS { F4, F5, F6, F7 }
-#define MATRIX_COL_PINS { D4, C6, D7, E6 }
-
-/* COL2ROW, ROW2COL*/
-#define DIODE_DIRECTION COL2ROW
-
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
#define LOCKING_SUPPORT_ENABLE
/* Locking resynchronize hack */
diff --git a/keyboards/ckeys/handwire_101/info.json b/keyboards/ckeys/handwire_101/info.json
index 3d270685c5..970a052385 100644
--- a/keyboards/ckeys/handwire_101/info.json
+++ b/keyboards/ckeys/handwire_101/info.json
@@ -8,6 +8,11 @@
"pid": "0x6060",
"device_version": "0.0.1"
},
+ "matrix_pins": {
+ "cols": ["D4", "C6", "D7", "E6"],
+ "rows": ["F4", "F5", "F6", "F7"]
+ },
+ "diode_direction": "COL2ROW",
"processor": "atmega32u4",
"bootloader": "caterina",
"layout_aliases": {
diff --git a/keyboards/ckeys/nakey/config.h b/keyboards/ckeys/nakey/config.h
index e8c0aaebbe..60f42fbcda 100644
--- a/keyboards/ckeys/nakey/config.h
+++ b/keyboards/ckeys/nakey/config.h
@@ -17,23 +17,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
#pragma once
-
-/*
- * Keyboard Matrix Assignments
- *
- * Change this to how you wired your keyboard
- * COLS: AVR pins used for columns, left to right
- * ROWS: AVR pins used for rows, top to bottom
- * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
- * ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
- *
-*/
-#define MATRIX_ROW_PINS { F1, F4, F5, F6, F7 }
-#define MATRIX_COL_PINS { B0, B1, B2, B3 }
-
-/* COL2ROW, ROW2COL*/
-#define DIODE_DIRECTION COL2ROW
-
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
#define LOCKING_SUPPORT_ENABLE
/* Locking resynchronize hack */
diff --git a/keyboards/ckeys/nakey/info.json b/keyboards/ckeys/nakey/info.json
index 453ad39b13..9fbcc7635e 100644
--- a/keyboards/ckeys/nakey/info.json
+++ b/keyboards/ckeys/nakey/info.json
@@ -8,6 +8,11 @@
"pid": "0x6060",
"device_version": "0.0.1"
},
+ "matrix_pins": {
+ "cols": ["B0", "B1", "B2", "B3"],
+ "rows": ["F1", "F4", "F5", "F6", "F7"]
+ },
+ "diode_direction": "COL2ROW",
"processor": "atmega32u4",
"bootloader": "halfkay",
"community_layouts": ["numpad_5x4"],
diff --git a/keyboards/ckeys/obelus/config.h b/keyboards/ckeys/obelus/config.h
index 1bc6def7fd..0588edea27 100644
--- a/keyboards/ckeys/obelus/config.h
+++ b/keyboards/ckeys/obelus/config.h
@@ -17,23 +17,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
#pragma once
-
-/*
- * Keyboard Matrix Assignments
- *
- * Change this to how you wired your keyboard
- * COLS: AVR pins used for columns, left to right
- * ROWS: AVR pins used for rows, top to bottom
- * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
- * ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
- *
-*/
-#define MATRIX_ROW_PINS { F4, F5, F6, F7 }
-#define MATRIX_COL_PINS { F0, F1, B2, B3 }
-
-/* COL2ROW, ROW2COL*/
-#define DIODE_DIRECTION COL2ROW
-
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
#define LOCKING_SUPPORT_ENABLE
/* Locking resynchronize hack */
diff --git a/keyboards/ckeys/obelus/info.json b/keyboards/ckeys/obelus/info.json
index 9697e3a9dd..33c7a23471 100644
--- a/keyboards/ckeys/obelus/info.json
+++ b/keyboards/ckeys/obelus/info.json
@@ -8,6 +8,11 @@
"pid": "0x6060",
"device_version": "0.0.1"
},
+ "matrix_pins": {
+ "cols": ["F0", "F1", "B2", "B3"],
+ "rows": ["F4", "F5", "F6", "F7"]
+ },
+ "diode_direction": "COL2ROW",
"backlight": {
"pin": "B7"
},
diff --git a/keyboards/ckeys/thedora/config.h b/keyboards/ckeys/thedora/config.h
index 5bcb91e822..8eaf7dc2f3 100755
--- a/keyboards/ckeys/thedora/config.h
+++ b/keyboards/ckeys/thedora/config.h
@@ -16,13 +16,6 @@
#pragma once
-#define MATRIX_ROW_PINS { A2, A1, A0, B8 }
-#define MATRIX_COL_PINS { B5, B4, B3, B2, B1, B0 }
-
-
-/* COL2ROW, ROW2COL */
-#define DIODE_DIRECTION COL2ROW
-
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
#define LOCKING_SUPPORT_ENABLE
/* Locking resynchronize hack */
diff --git a/keyboards/ckeys/thedora/info.json b/keyboards/ckeys/thedora/info.json
index b72287fc2e..a442db236d 100644
--- a/keyboards/ckeys/thedora/info.json
+++ b/keyboards/ckeys/thedora/info.json
@@ -8,6 +8,11 @@
"pid": "0x6060",
"device_version": "0.0.1"
},
+ "matrix_pins": {
+ "cols": ["B5", "B4", "B3", "B2", "B1", "B0"],
+ "rows": ["A2", "A1", "A0", "B8"]
+ },
+ "diode_direction": "COL2ROW",
"encoder": {
"rotary": [
{"pin_a": "B13", "pin_b": "B15"}
diff --git a/keyboards/ckeys/washington/config.h b/keyboards/ckeys/washington/config.h
index b57e29acde..1b4e5a6d87 100644
--- a/keyboards/ckeys/washington/config.h
+++ b/keyboards/ckeys/washington/config.h
@@ -15,23 +15,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
#pragma once
-
-/*
- * Keyboard Matrix Assignments
- *
- * Change this to how you wired your keyboard
- * COLS: AVR pins used for columns, left to right
- * ROWS: AVR pins used for rows, top to bottom
- * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
- * ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
- *
- */
-#define MATRIX_ROW_PINS { F4, F5, F6 }
-#define MATRIX_COL_PINS { F7, B1, B3 }
-
-/* COL2ROW, ROW2COL*/
-#define DIODE_DIRECTION COL2ROW
-
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
#define LOCKING_SUPPORT_ENABLE
/* Locking resynchronize hack */
diff --git a/keyboards/ckeys/washington/info.json b/keyboards/ckeys/washington/info.json
index b9bb2fce7b..03649056f2 100644
--- a/keyboards/ckeys/washington/info.json
+++ b/keyboards/ckeys/washington/info.json
@@ -8,6 +8,11 @@
"pid": "0x002A",
"device_version": "0.0.1"
},
+ "matrix_pins": {
+ "cols": ["F7", "B1", "B3"],
+ "rows": ["F4", "F5", "F6"]
+ },
+ "diode_direction": "COL2ROW",
"encoder": {
"rotary": [
{"pin_a": "D4", "pin_b": "C6"}
diff --git a/keyboards/clawsome/bookerboard/config.h b/keyboards/clawsome/bookerboard/config.h
deleted file mode 100644
index 60c531b89f..0000000000
--- a/keyboards/clawsome/bookerboard/config.h
+++ /dev/null
@@ -1,34 +0,0 @@
-/*
-Copyright 2020 AAClawson (AlisGraveNil)
-
-This program is free software: you can redistribute it and/or modify
-it under the terms of the GNU General Public License as published by
-the Free Software Foundation, either version 2 of the License, or
-(at your option) any later version.
-
-This program is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-GNU General Public License for more details.
-
-You should have received a copy of the GNU General Public License
-along with this program. If not, see <http://www.gnu.org/licenses/>.
-*/
-
-#pragma once
-
-
-/*
- * Keyboard Matrix Assignments
- *
- * Change this to how you wired your keyboard
- * COLS: AVR pins used for columns, left to right
- * ROWS: AVR pins used for rows, top to bottom
- * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
- * ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
- *
- */
-#define MATRIX_ROW_PINS { B5, B4, E6, D7 }
-#define MATRIX_COL_PINS { B6, B2, B3 }
-
-#define DIODE_DIRECTION COL2ROW
diff --git a/keyboards/clawsome/bookerboard/info.json b/keyboards/clawsome/bookerboard/info.json
index 2e153f567d..d0ac88f548 100644
--- a/keyboards/clawsome/bookerboard/info.json
+++ b/keyboards/clawsome/bookerboard/info.json
@@ -8,6 +8,11 @@
"pid": "0x41CE",
"device_version": "0.0.1"
},
+ "matrix_pins": {
+ "cols": ["B6", "B2", "B3"],
+ "rows": ["B5", "B4", "E6", "D7"]
+ },
+ "diode_direction": "COL2ROW",
"processor": "atmega32u4",
"bootloader": "atmel-dfu",
"layouts": {
diff --git a/keyboards/clawsome/coupe/config.h b/keyboards/clawsome/coupe/config.h
deleted file mode 100644
index bad945e802..0000000000
--- a/keyboards/clawsome/coupe/config.h
+++ /dev/null
@@ -1,34 +0,0 @@
-/*
-Copyright 2020 AAClawson (AlisGraveNil)
-
-This program is free software: you can redistribute it and/or modify
-it under the terms of the GNU General Public License as published by
-the Free Software Foundation, either version 2 of the License, or
-(at your option) any later version.
-
-This program is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-GNU General Public License for more details.
-
-You should have received a copy of the GNU General Public License
-along with this program. If not, see <http://www.gnu.org/licenses/>.
-*/
-
-#pragma once
-
-
-/*
- * Keyboard Matrix Assignments
- *
- * Change this to how you wired your keyboard
- * COLS: AVR pins used for columns, left to right
- * ROWS: AVR pins used for rows, top to bottom
- * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
- * ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
- *
- */
-#define MATRIX_ROW_PINS { D7, D2, C6, B5, D4, B4, D0, D3, D1, E6 }
-#define MATRIX_COL_PINS { F4, F5, F6, F7, B6, B3, B2 }
-
-#define DIODE_DIRECTION COL2ROW
diff --git a/keyboards/clawsome/coupe/info.json b/keyboards/clawsome/coupe/info.json
index be50f5c13e..7bbc577308 100644
--- a/keyboards/clawsome/coupe/info.json
+++ b/keyboards/clawsome/coupe/info.json
@@ -8,6 +8,11 @@
"pid": "0x7E94",
"device_version": "0.0.1"
},
+ "matrix_pins": {
+ "cols": ["F4", "F5", "F6", "F7", "B6", "B3", "B2"],
+ "rows": ["D7", "D2", "C6", "B5", "D4", "B4", "D0", "D3", "D1", "E6"]
+ },
+ "diode_direction": "COL2ROW",
"processor": "atmega32u4",
"bootloader": "caterina",
"community_layouts": ["60_ansi"],
diff --git a/keyboards/clawsome/doodle/config.h b/keyboards/clawsome/doodle/config.h
deleted file mode 100644
index 7dcdcc03a8..0000000000
--- a/keyboards/clawsome/doodle/config.h
+++ /dev/null
@@ -1,33 +0,0 @@
-/* Copyright 2021 AAClawson (AlisGraveNil)
- *
- * This program is free software: you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation, either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program. If not, see <http://www.gnu.org/licenses/>.
- */
-
-#pragma once
-
-
-/*
- * Keyboard Matrix Assignments
- *
- * Change this to how you wired your keyboard
- * COLS: AVR pins used for columns, left to right
- * ROWS: AVR pins used for rows, top to bottom
- * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
- * ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
- *
- */
-#define MATRIX_ROW_PINS { D4, C6 }
-#define MATRIX_COL_PINS { D7, F4, E6 }
-
-#define DIODE_DIRECTION COL2ROW
diff --git a/keyboards/clawsome/doodle/info.json b/keyboards/clawsome/doodle/info.json
index 6c40392ec8..8b675684eb 100644
--- a/keyboards/clawsome/doodle/info.json
+++ b/keyboards/clawsome/doodle/info.json
@@ -8,6 +8,11 @@
"pid": "0x0000",
"device_version": "0.0.1"
},
+ "matrix_pins": {
+ "cols": ["D7", "F4", "E6"],
+ "rows": ["D4", "C6"]
+ },
+ "diode_direction": "COL2ROW",
"processor": "atmega32u4",
"bootloader": "caterina",
"layouts": {
diff --git a/keyboards/clawsome/fightpad/config.h b/keyboards/clawsome/fightpad/config.h
deleted file mode 100644
index a62845a6af..0000000000
--- a/keyboards/clawsome/fightpad/config.h
+++ /dev/null
@@ -1,34 +0,0 @@
-/*
-Copyright 2020 AAClawson (AlisGraveNil)
-
-This program is free software: you can redistribute it and/or modify
-it under the terms of the GNU General Public License as published by
-the Free Software Foundation, either version 2 of the License, or
-(at your option) any later version.
-
-This program is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-GNU General Public License for more details.
-
-You should have received a copy of the GNU General Public License
-along with this program. If not, see <http://www.gnu.org/licenses/>.
-*/
-
-#pragma once
-
-
-/*
- * Keyboard Matrix Assignments
- *
- * Change this to how you wired your keyboard
- * COLS: AVR pins used for columns, left to right
- * ROWS: AVR pins used for rows, top to bottom
- * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
- * ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
- *
- */
-#define MATRIX_ROW_PINS { B5, B6 }
-#define MATRIX_COL_PINS { D7, E6, B4, B2, B3, B1, F7 }
-
-#define DIODE_DIRECTION COL2ROW
diff --git a/keyboards/clawsome/fightpad/info.json b/keyboards/clawsome/fightpad/info.json
index df9c621627..3aad087486 100644
--- a/keyboards/clawsome/fightpad/info.json
+++ b/keyboards/clawsome/fightpad/info.json
@@ -8,6 +8,11 @@
"pid": "0x481C",
"device_version": "0.0.1"
},
+ "matrix_pins": {
+ "cols": ["D7", "E6", "B4", "B2", "B3", "B1", "F7"],
+ "rows": ["B5", "B6"]
+ },
+ "diode_direction": "COL2ROW",
"processor": "atmega32u4",
"bootloader": "caterina",
"layouts": {
diff --git a/keyboards/clawsome/gamebuddy/v1_0/config.h b/keyboards/clawsome/gamebuddy/v1_0/config.h
deleted file mode 100644
index bf867467f2..0000000000
--- a/keyboards/clawsome/gamebuddy/v1_0/config.h
+++ /dev/null
@@ -1,24 +0,0 @@
-/*
-Copyright 2020 AAClawson (AlisGraveNil)
-
-This program is free software: you can redistribute it and/or modify
-it under the terms of the GNU General Public License as published by
-the Free Software Foundation, either version 2 of the License, or
-(at your option) any later version.
-
-This program is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-GNU General Public License for more details.
-
-You should have received a copy of the GNU General Public License
-along with this program. If not, see <http://www.gnu.org/licenses/>.
-*/
-
-#pragma once
-
-
-#define MATRIX_ROW_PINS { D1, D0, E6, B3, B2 }
-#define MATRIX_COL_PINS { F5, F6, F7, B1, C6, D7, B6 }
-
-#define DIODE_DIRECTION COL2ROW
diff --git a/keyboards/clawsome/gamebuddy/v1_0/info.json b/keyboards/clawsome/gamebuddy/v1_0/info.json
index 273755e62c..b4875077f4 100644
--- a/keyboards/clawsome/gamebuddy/v1_0/info.json
+++ b/keyboards/clawsome/gamebuddy/v1_0/info.json
@@ -8,6 +8,11 @@
"pid": "0x17B9",
"device_version": "0.0.1"
},
+ "matrix_pins": {
+ "cols": ["F5", "F6", "F7", "B1", "C6", "D7", "B6"],
+ "rows": ["D1", "D0", "E6", "B3", "B2"]
+ },
+ "diode_direction": "COL2ROW",
"processor": "atmega32u4",
"bootloader": "caterina",
"layouts": {
diff --git a/keyboards/clawsome/gamebuddy/v1_m/config.h b/keyboards/clawsome/gamebuddy/v1_m/config.h
deleted file mode 100644
index 5c2f368800..0000000000
--- a/keyboards/clawsome/gamebuddy/v1_m/config.h
+++ /dev/null
@@ -1,33 +0,0 @@
-/* Copyright 2021 AAClawson (AlisGraveNil)
- *
- * This program is free software: you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation, either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program. If not, see <http://www.gnu.org/licenses/>.
- */
-
-#pragma once
-
-
-/*
- * Keyboard Matrix Assignments
- *
- * Change this to how you wired your keyboard
- * COLS: AVR pins used for columns, left to right
- * ROWS: AVR pins used for rows, top to bottom
- * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
- * ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
- *
- */
-#define MATRIX_ROW_PINS { C6, D7, B5, B3, B2 }
-#define MATRIX_COL_PINS { B1, F7, F6, F5, E6, B4, B6 }
-
-#define DIODE_DIRECTION COL2ROW
diff --git a/keyboards/clawsome/gamebuddy/v1_m/info.json b/keyboards/clawsome/gamebuddy/v1_m/info.json
index 9c9ee3938b..3330139b59 100644
--- a/keyboards/clawsome/gamebuddy/v1_m/info.json
+++ b/keyboards/clawsome/gamebuddy/v1_m/info.json
@@ -8,6 +8,11 @@
"pid": "0x0000",
"device_version": "0.0.1"
},
+ "matrix_pins": {
+ "cols": ["B1", "F7", "F6", "F5", "E6", "B4", "B6"],
+ "rows": ["C6", "D7", "B5", "B3", "B2"]
+ },
+ "diode_direction": "COL2ROW",
"processor": "atmega32u4",
"bootloader": "caterina",
"layouts": {
diff --git a/keyboards/clawsome/hatchback/config.h b/keyboards/clawsome/hatchback/config.h
deleted file mode 100644
index 0c0cd52041..0000000000
--- a/keyboards/clawsome/hatchback/config.h
+++ /dev/null
@@ -1,33 +0,0 @@
-/* Copyright 2021 AAClawson (AlisGraveNil)
- *
- * This program is free software: you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation, either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program. If not, see <http://www.gnu.org/licenses/>.
- */
-
-#pragma once
-
-
-/*
- * Keyboard Matrix Assignments
- *
- * Change this to how you wired your keyboard
- * COLS: AVR pins used for columns, left to right
- * ROWS: AVR pins used for rows, top to bottom
- * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
- * ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
- *
- */
-#define MATRIX_ROW_PINS { B0, B6, D4, B4, D0, B5, D1, E6, D2, D7, D3, C6 }
-#define MATRIX_COL_PINS { F4, F5, F6, F7, B1, B3, B2, D5, C7, F1 }
-
-#define DIODE_DIRECTION COL2ROW
diff --git a/keyboards/clawsome/hatchback/info.json b/keyboards/clawsome/hatchback/info.json
index 63cd7a80d7..79af5d5279 100644
--- a/keyboards/clawsome/hatchback/info.json
+++ b/keyboards/clawsome/hatchback/info.json
@@ -8,6 +8,11 @@
"pid": "0x0000",
"device_version": "0.0.1"
},
+ "matrix_pins": {
+ "cols": ["F4", "F5", "F6", "F7", "B1", "B3", "B2", "D5", "C7", "F1"],
+ "rows": ["B0", "B6", "D4", "B4", "D0", "B5", "D1", "E6", "D2", "D7", "D3", "C6"]
+ },
+ "diode_direction": "COL2ROW",
"processor": "atmega32u4",
"bootloader": "caterina",
"layouts": {
diff --git a/keyboards/clawsome/luggage_rack/config.h b/keyboards/clawsome/luggage_rack/config.h
deleted file mode 100644
index b6df355827..0000000000
--- a/keyboards/clawsome/luggage_rack/config.h
+++ /dev/null
@@ -1,33 +0,0 @@
-/* Copyright 2021 AAClawson (AlisGraveNil)
- *
- * This program is free software: you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation, either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program. If not, see <http://www.gnu.org/licenses/>.
- */
-
-#pragma once
-
-
-/*
- * Keyboard Matrix Assignments
- *
- * Change this to how you wired your keyboard
- * COLS: AVR pins used for columns, left to right
- * ROWS: AVR pins used for rows, top to bottom
- * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
- * ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
- *
- */
-#define MATRIX_ROW_PINS { D3, F4, B0, B2, F7, B6, B1, F5, F6 }
-#define MATRIX_COL_PINS { D4, D0, D1 }
-
-#define DIODE_DIRECTION COL2ROW
diff --git a/keyboards/clawsome/luggage_rack/info.json b/keyboards/clawsome/luggage_rack/info.json
index e903890122..3c813bd36a 100644
--- a/keyboards/clawsome/luggage_rack/info.json
+++ b/keyboards/clawsome/luggage_rack/info.json
@@ -8,6 +8,11 @@
"pid": "0x0000",
"device_version": "0.0.1"
},
+ "matrix_pins": {
+ "cols": ["D4", "D0", "D1"],
+ "rows": ["D3", "F4", "B0", "B2", "F7", "B6", "B1", "F5", "F6"]
+ },
+ "diode_direction": "COL2ROW",
"processor": "atmega32u4",
"bootloader": "caterina",
"layouts": {
diff --git a/keyboards/clawsome/numeros/config.h b/keyboards/clawsome/numeros/config.h
deleted file mode 100644
index a1ee98579f..0000000000
--- a/keyboards/clawsome/numeros/config.h
+++ /dev/null
@@ -1,34 +0,0 @@
-/*
-Copyright 2020 AAClawson (AlisGraveNil)
-
-This program is free software: you can redistribute it and/or modify
-it under the terms of the GNU General Public License as published by
-the Free Software Foundation, either version 2 of the License, or
-(at your option) any later version.
-
-This program is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-GNU General Public License for more details.
-
-You should have received a copy of the GNU General Public License
-along with this program. If not, see <http://www.gnu.org/licenses/>.
-*/
-
-#pragma once
-
-
-/*
- * Keyboard Matrix Assignments
- *
- * Change this to how you wired your keyboard
- * COLS: AVR pins used for columns, left to right
- * ROWS: AVR pins used for rows, top to bottom
- * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
- * ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
- *
- */
-#define MATRIX_ROW_PINS { D0, C6, B2, B6, B5 }
-#define MATRIX_COL_PINS { B3, E6, D7, D4 }
-
-#define DIODE_DIRECTION COL2ROW
diff --git a/keyboards/clawsome/numeros/info.json b/keyboards/clawsome/numeros/info.json
index 06e9ba9751..f51ea9fa56 100644
--- a/keyboards/clawsome/numeros/info.json
+++ b/keyboards/clawsome/numeros/info.json
@@ -8,6 +8,11 @@
"pid": "0x0000",
"device_version": "0.0.1"
},
+ "matrix_pins": {
+ "cols": ["B3", "E6", "D7", "D4"],
+ "rows": ["D0", "C6", "B2", "B6", "B5"]
+ },
+ "diode_direction": "COL2ROW",
"processor": "atmega32u4",
"bootloader": "caterina",
"community_layouts": ["numpad_5x4"],
diff --git a/keyboards/clawsome/roadster/config.h b/keyboards/clawsome/roadster/config.h
deleted file mode 100644
index 30294c7cfb..0000000000
--- a/keyboards/clawsome/roadster/config.h
+++ /dev/null
@@ -1,34 +0,0 @@
-/*
-Copyright 2020 AAClawson (AlisGraveNil)
-
-This program is free software: you can redistribute it and/or modify
-it under the terms of the GNU General Public License as published by
-the Free Software Foundation, either version 2 of the License, or
-(at your option) any later version.
-
-This program is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-GNU General Public License for more details.
-
-You should have received a copy of the GNU General Public License
-along with this program. If not, see <http://www.gnu.org/licenses/>.
-*/
-
-#pragma once
-
-
-/*
- * Keyboard Matrix Assignments
- *
- * Change this to how you wired your keyboard
- * COLS: AVR pins used for columns, left to right
- * ROWS: AVR pins used for rows, top to bottom
- * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
- * ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
- *
- */
-#define MATRIX_ROW_PINS { D2, D3, D0, D1 }
-#define MATRIX_COL_PINS { D4, C6, D7, E6, B4, B5, B6, B2, B3, B1, F7, F6 }
-
-#define DIODE_DIRECTION COL2ROW
diff --git a/keyboards/clawsome/roadster/info.json b/keyboards/clawsome/roadster/info.json
index 4e486b037e..69ecaee368 100644
--- a/keyboards/clawsome/roadster/info.json
+++ b/keyboards/clawsome/roadster/info.json
@@ -8,6 +8,11 @@
"pid": "0x0000",
"device_version": "0.0.1"
},
+ "matrix_pins": {
+ "cols": ["D4", "C6", "D7", "E6", "B4", "B5", "B6", "B2", "B3", "B1", "F7", "F6"],
+ "rows": ["D2", "D3", "D0", "D1"]
+ },
+ "diode_direction": "COL2ROW",
"processor": "atmega32u4",
"bootloader": "caterina",
"layouts": {
diff --git a/keyboards/clawsome/sedan/config.h b/keyboards/clawsome/sedan/config.h
deleted file mode 100644
index b7fe854916..0000000000
--- a/keyboards/clawsome/sedan/config.h
+++ /dev/null
@@ -1,34 +0,0 @@
-/*
-Copyright 2020 AAClawson (AlisGraveNil)
-
-This program is free software: you can redistribute it and/or modify
-it under the terms of the GNU General Public License as published by
-the Free Software Foundation, either version 2 of the License, or
-(at your option) any later version.
-
-This program is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-GNU General Public License for more details.
-
-You should have received a copy of the GNU General Public License
-along with this program. If not, see <http://www.gnu.org/licenses/>.
-*/
-
-#pragma once
-
-
-/*
- * Keyboard Matrix Assignments
- *
- * Change this to how you wired your keyboard
- * COLS: AVR pins used for columns, left to right
- * ROWS: AVR pins used for rows, top to bottom
- * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
- * ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
- *
- */
-#define MATRIX_ROW_PINS { C6, D4, D0, D1, D3 }
-#define MATRIX_COL_PINS { B0, F4, F7, B1, B3, B2, B6, F0, F1, C7, D5, B7, B5, B4, E6 }
-
-#define DIODE_DIRECTION COL2ROW
diff --git a/keyboards/clawsome/sedan/info.json b/keyboards/clawsome/sedan/info.json
index fc6ddd8a78..65a979315c 100644
--- a/keyboards/clawsome/sedan/info.json
+++ b/keyboards/clawsome/sedan/info.json
@@ -8,6 +8,11 @@
"pid": "0x8C78",
"device_version": "0.0.1"
},
+ "matrix_pins": {
+ "cols": ["B0", "F4", "F7", "B1", "B3", "B2", "B6", "F0", "F1", "C7", "D5", "B7", "B5", "B4", "E6"],
+ "rows": ["C6", "D4", "D0", "D1", "D3"]
+ },
+ "diode_direction": "COL2ROW",
"processor": "atmega32u4",
"bootloader": "caterina",
"community_layouts": ["65_ansi"],
diff --git a/keyboards/clawsome/sidekick/config.h b/keyboards/clawsome/sidekick/config.h
deleted file mode 100644
index be550c7a71..0000000000
--- a/keyboards/clawsome/sidekick/config.h
+++ /dev/null
@@ -1,24 +0,0 @@
-/*
-Copyright 2020 AAClawson (AlisGraveNil)
-
-This program is free software: you can redistribute it and/or modify
-it under the terms of the GNU General Public License as published by
-the Free Software Foundation, either version 2 of the License, or
-(at your option) any later version.
-
-This program is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-GNU General Public License for more details.
-
-You should have received a copy of the GNU General Public License
-along with this program. If not, see <http://www.gnu.org/licenses/>.
-*/
-
-#pragma once
-
-
-#define MATRIX_ROW_PINS { D0, C6, B2, B6, B5 }
-#define MATRIX_COL_PINS { F6, F5, B1, B3, E6, D7, D4 }
-
-#define DIODE_DIRECTION COL2ROW
diff --git a/keyboards/clawsome/sidekick/info.json b/keyboards/clawsome/sidekick/info.json
index 93e170a09a..cfc028476f 100644
--- a/keyboards/clawsome/sidekick/info.json
+++ b/keyboards/clawsome/sidekick/info.json
@@ -8,6 +8,11 @@
"pid": "0xDB9F",
"device_version": "0.0.1"
},
+ "matrix_pins": {
+ "cols": ["F6", "F5", "B1", "B3", "E6", "D7", "D4"],
+ "rows": ["D0", "C6", "B2", "B6", "B5"]
+ },
+ "diode_direction": "COL2ROW",
"processor": "atmega32u4",
"bootloader": "atmel-dfu",
"layouts": {
diff --git a/keyboards/clawsome/suv/config.h b/keyboards/clawsome/suv/config.h
deleted file mode 100644
index 915ec1cf5b..0000000000
--- a/keyboards/clawsome/suv/config.h
+++ /dev/null
@@ -1,33 +0,0 @@
-/* Copyright 2021 AAClawson (AlisGraveNil)
- *
- * This program is free software: you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation, either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program. If not, see <http://www.gnu.org/licenses/>.
- */
-
-#pragma once
-
-
-/*
- * Keyboard Matrix Assignments
- *
- * Change this to how you wired your keyboard
- * COLS: AVR pins used for columns, left to right
- * ROWS: AVR pins used for rows, top to bottom
- * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
- * ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
- *
- */
-#define MATRIX_ROW_PINS { F0, B6, D0, F6, D4, F7, B3, B1, B0, C6, B2, D7 }
-#define MATRIX_COL_PINS { D3, D2, D1, B4, B5, B7, D5, C7, F1, F5, F4 }
-
-#define DIODE_DIRECTION COL2ROW
diff --git a/keyboards/clawsome/suv/info.json b/keyboards/clawsome/suv/info.json
index 2dadb4f79d..ddf951c9bb 100644
--- a/keyboards/clawsome/suv/info.json
+++ b/keyboards/clawsome/suv/info.json
@@ -8,6 +8,11 @@
"pid": "0x0000",
"device_version": "0.0.1"
},
+ "matrix_pins": {
+ "cols": ["D3", "D2", "D1", "B4", "B5", "B7", "D5", "C7", "F1", "F5", "F4"],
+ "rows": ["F0", "B6", "D0", "F6", "D4", "F7", "B3", "B1", "B0", "C6", "B2", "D7"]
+ },
+ "diode_direction": "COL2ROW",
"processor": "atmega32u4",
"bootloader": "caterina",
"layouts": {
diff --git a/keyboards/clickety_split/leeloo/info.json b/keyboards/clickety_split/leeloo/info.json
index cdd9d713a6..1390b98d1c 100644
--- a/keyboards/clickety_split/leeloo/info.json
+++ b/keyboards/clickety_split/leeloo/info.json
@@ -8,6 +8,11 @@
"pid": "0x2022",
"device_version": "0.1.3"
},
+ "matrix_pins": {
+ "cols": ["F6", "F7", "B1", "B3", "B2", "B6"],
+ "rows": ["C6", "D7", "E6", "B4", "B5"]
+ },
+ "diode_direction": "COL2ROW",
"encoder": {
"rotary": [
{"pin_a": "F5", "pin_b": "F4"}
diff --git a/keyboards/clickety_split/leeloo/rev1/config.h b/keyboards/clickety_split/leeloo/rev1/config.h
index b309fa210b..96c6b71d37 100644
--- a/keyboards/clickety_split/leeloo/rev1/config.h
+++ b/keyboards/clickety_split/leeloo/rev1/config.h
@@ -17,12 +17,6 @@
#pragma once
-
-// wiring of each half
-#define MATRIX_ROW_PINS { C6, D7, E6, B4, B5 }
-#define MATRIX_COL_PINS { F6, F7, B1, B3, B2, B6 }
-#define DIODE_DIRECTION COL2ROW
-
/* define tapping term */
#define TAPPING_TERM 100
diff --git a/keyboards/cmm_studio/fuji65/config.h b/keyboards/cmm_studio/fuji65/config.h
index 3e0f08ab9a..5cf553bca9 100644
--- a/keyboards/cmm_studio/fuji65/config.h
+++ b/keyboards/cmm_studio/fuji65/config.h
@@ -16,22 +16,6 @@
#pragma once
-
-/*
- * Keyboard Matrix Assignments
- *
- * Change this to how you wired your keyboard
- * COLS: AVR pins used for columns, left to right
- * ROWS: AVR pins used for rows, top to bottom
- * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
- * ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
- *
- */
-#define MATRIX_ROW_PINS { B5, B4, D7, D6, B6 }
-#define MATRIX_COL_PINS { F7, F6, F5, F4, F1, F0, B0, B1, B2, B3, D5, D3, D2, D1, D0 }
-
-#define DIODE_DIRECTION COL2ROW
-
#define RGB_DI_PIN E6
#ifdef RGB_DI_PIN
#define RGBLED_NUM 8
diff --git a/keyboards/cmm_studio/fuji65/info.json b/keyboards/cmm_studio/fuji65/info.json
index 9f47befd54..30d273318e 100644
--- a/keyboards/cmm_studio/fuji65/info.json
+++ b/keyboards/cmm_studio/fuji65/info.json
@@ -8,6 +8,11 @@
"pid": "0x364D",
"device_version": "0.0.1"
},
+ "matrix_pins": {
+ "cols": ["F7", "F6", "F5", "F4", "F1", "F0", "B0", "B1", "B2", "B3", "D5", "D3", "D2", "D1", "D0"],
+ "rows": ["B5", "B4", "D7", "D6", "B6"]
+ },
+ "diode_direction": "COL2ROW",
"processor": "atmega32u4",
"bootloader": "atmel-dfu",
"layouts": {
diff --git a/keyboards/cmm_studio/saka68/hotswap/config.h b/keyboards/cmm_studio/saka68/hotswap/config.h
deleted file mode 100644
index b8a29be0de..0000000000
--- a/keyboards/cmm_studio/saka68/hotswap/config.h
+++ /dev/null
@@ -1,35 +0,0 @@
-/* Copyright 2021 CMM.Studio Freather
-
-
-
-This program is free software: you can redistribute it and/or modify
-it under the terms of the GNU General Public License as published by
-the Free Software Foundation, either version 2 of the License, or
-(at your option) any later version.
-
-This program is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-GNU General Public License for more details.
-
-You should have received a copy of the GNU General Public License
-along with this program. If not, see <http://www.gnu.org/licenses/>.
-*/
-
-#pragma once
-
-
-/*
- * Keyboard Matrix Assignments
- *
- * Change this to how you wired your keyboard
- * COLS: AVR pins used for columns, left to right
- * ROWS: AVR pins used for rows, top to bottom
- * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
- * ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
- *
- */
-#define MATRIX_ROW_PINS { D2, D1, B0, F6, F7 }
-#define MATRIX_COL_PINS { D4, D6, D7, B4, B5, B6, C6, F5, F4, F1, F0, B1, B2, B3, D3, D5 }
-
-#define DIODE_DIRECTION COL2ROW
diff --git a/keyboards/cmm_studio/saka68/hotswap/info.json b/keyboards/cmm_studio/saka68/hotswap/info.json
index ee91cf527f..555d98c147 100644
--- a/keyboards/cmm_studio/saka68/hotswap/info.json
+++ b/keyboards/cmm_studio/saka68/hotswap/info.json
@@ -8,6 +8,11 @@
"pid": "0x5348",
"device_version": "0.0.1"
},
+ "matrix_pins": {
+ "cols": ["D4", "D6", "D7", "B4", "B5", "B6", "C6", "F5", "F4", "F1", "F0", "B1", "B2", "B3", "D3", "D5"],
+ "rows": ["D2", "D1", "B0", "F6", "F7"]
+ },
+ "diode_direction": "COL2ROW",
"processor": "atmega32u4",
"bootloader": "atmel-dfu",
"layout_aliases": {
diff --git a/keyboards/cmm_studio/saka68/solder/config.h b/keyboards/cmm_studio/saka68/solder/config.h
deleted file mode 100644
index 76960df064..0000000000
--- a/keyboards/cmm_studio/saka68/solder/config.h
+++ /dev/null
@@ -1,33 +0,0 @@
-/* Copyright 2020 CMM.Studio Freather
- *
- * This program is free software: you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation, either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program. If not, see <http://www.gnu.org/licenses/>.
- */
-
-#pragma once
-
-
-/*
- * Keyboard Matrix Assignments
- *
- * Change this to how you wired your keyboard
- * COLS: AVR pins used for columns, left to right
- * ROWS: AVR pins used for rows, top to bottom
- * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
- * ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
- *
- */
-#define MATRIX_ROW_PINS { D1, D0, B0, F6, F7 }
-#define MATRIX_COL_PINS { D4, D6, D7, B4, B5, B6, C6, F5, F4, F1, F0, B1, B2, B3, D2, D3, D5 }
-
-#define DIODE_DIRECTION COL2ROW
diff --git a/keyboards/cmm_studio/saka68/solder/info.json b/keyboards/cmm_studio/saka68/solder/info.json
index 8612ead7ae..a4d5ae4f05 100644
--- a/keyboards/cmm_studio/saka68/solder/info.json
+++ b/keyboards/cmm_studio/saka68/solder/info.json
@@ -8,6 +8,11 @@
"pid": "0x534B",
"device_version": "0.0.1"
},
+ "matrix_pins": {
+ "cols": ["D4", "D6", "D7", "B4", "B5", "B6", "C6", "F5", "F4", "F1", "F0", "B1", "B2", "B3", "D2", "D3", "D5"],
+ "rows": ["D1", "D0", "B0", "F6", "F7"]
+ },
+ "diode_direction": "COL2ROW",
"processor": "atmega32u4",
"bootloader": "atmel-dfu",
"layout_aliases": {
diff --git a/keyboards/coarse/cordillera/config.h b/keyboards/coarse/cordillera/config.h
index e251f6f90d..ef26abfc02 100644
--- a/keyboards/coarse/cordillera/config.h
+++ b/keyboards/coarse/cordillera/config.h
@@ -17,10 +17,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
#pragma once
-#define MATRIX_ROW_PINS { A13, B9, F1, A10, A9 }
-#define MATRIX_COL_PINS { B15, B14, B13, B12, B11, B10, B2, B1, B8, B7, B6, B5, B4, B3, A15, A14 }
-#define DIODE_DIRECTION COL2ROW
-
#define BACKLIGHT_PWM_DRIVER PWMD1
#define BACKLIGHT_PWM_CHANNEL 1
#define BACKLIGHT_PAL_MODE 1
diff --git a/keyboards/coarse/cordillera/info.json b/keyboards/coarse/cordillera/info.json
index 9d84f0dee3..507d499236 100644
--- a/keyboards/coarse/cordillera/info.json
+++ b/keyboards/coarse/cordillera/info.json
@@ -8,6 +8,11 @@
"pid": "0x1401",
"device_version": "0.0.1"
},
+ "matrix_pins": {
+ "cols": ["B15", "B14", "B13", "B12", "B11", "B10", "B2", "B1", "B8", "B7", "B6", "B5", "B4", "B3", "A15", "A14"],
+ "rows": ["A13", "B9", "F1", "A10", "A9"]
+ },
+ "diode_direction": "COL2ROW",
"backlight": {
"pin": "A8",
"levels": 6,
diff --git a/keyboards/coarse/ixora/config.h b/keyboards/coarse/ixora/config.h
deleted file mode 100644
index 1d10a99696..0000000000
--- a/keyboards/coarse/ixora/config.h
+++ /dev/null
@@ -1,8 +0,0 @@
-#pragma once
-
-
-#define MATRIX_ROW_PINS { A0 }
-#define MATRIX_COL_PINS { B4, A15, B3, A1, B6, B5 }
-
-/* COL2ROW, ROW2COL */
-#define DIODE_DIRECTION COL2ROW
diff --git a/keyboards/coarse/ixora/info.json b/keyboards/coarse/ixora/info.json
index ef7bae5129..c38424ffa7 100644
--- a/keyboards/coarse/ixora/info.json
+++ b/keyboards/coarse/ixora/info.json
@@ -8,6 +8,11 @@
"pid": "0x0C61",
"device_version": "1.0.0"
},
+ "matrix_pins": {
+ "cols": ["B4", "A15", "B3", "A1", "B6", "B5"],
+ "rows": ["A0"]
+ },
+ "diode_direction": "COL2ROW",
"indicators": {
"caps_lock": "A10",
"num_lock": "A9",
diff --git a/keyboards/coarse/vinta/config.h b/keyboards/coarse/vinta/config.h
deleted file mode 100644
index 629f4b9b16..0000000000
--- a/keyboards/coarse/vinta/config.h
+++ /dev/null
@@ -1,8 +0,0 @@
-#pragma once
-
-
-#define MATRIX_ROW_PINS { A10, A9, B0, A7, A6 }
-#define MATRIX_COL_PINS { A5, A4, A3, A2, A1, A0, F1, F0, B7, B6, B5, B4, B3, A15, A14, A13 }
-
-/* COL2ROW, ROW2COL*/
-#define DIODE_DIRECTION COL2ROW
diff --git a/keyboards/coarse/vinta/info.json b/keyboards/coarse/vinta/info.json
index 8a615aac0d..0caf3a3e33 100644
--- a/keyboards/coarse/vinta/info.json
+++ b/keyboards/coarse/vinta/info.json
@@ -8,6 +8,11 @@
"pid": "0x0C61",
"device_version": "1.0.0"
},
+ "matrix_pins": {
+ "cols": ["A5", "A4", "A3", "A2", "A1", "A0", "F1", "F0", "B7", "B6", "B5", "B4", "B3", "A15", "A14", "A13"],
+ "rows": ["A10", "A9", "B0", "A7", "A6"]
+ },
+ "diode_direction": "COL2ROW",
"processor": "STM32F042",
"bootloader": "stm32-dfu",
"debounce": 0,
diff --git a/keyboards/compound/config.h b/keyboards/compound/config.h
deleted file mode 100644
index f2824f9630..0000000000
--- a/keyboards/compound/config.h
+++ /dev/null
@@ -1,27 +0,0 @@
-/*
-Copyright 2021 Rafael Yumagulov
-
-This program is free software: you can redistribute it and/or modify
-it under the terms of the GNU General Public License as published by
-the Free Software Foundation, either version 2 of the License, or
-(at your option) any later version.
-
-This program is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-GNU General Public License for more details.
-
-You should have received a copy of the GNU General Public License
-along with this program. If not, see <http://www.gnu.org/licenses/>.
-*/
-
-#pragma once
-
-
-// ROWS: Top to bottom, COLS: Left to right
-
-#define MATRIX_ROW_PINS {B0,B7,D0,D1,D2}
-#define MATRIX_COL_PINS {F0,D5,D4,D6,D7,B4,B5,B6,C6,C7,F7,F6,F5,F4,F1}
-
-/* COL2ROW or ROW2COL */
-#define DIODE_DIRECTION COL2ROW
diff --git a/keyboards/compound/info.json b/keyboards/compound/info.json
index ea280b386b..f3b95cec42 100644
--- a/keyboards/compound/info.json
+++ b/keyboards/compound/info.json
@@ -8,6 +8,11 @@
"pid": "0xB0BA",
"device_version": "0.0.1"
},
+ "matrix_pins": {
+ "cols": ["F0", "D5", "D4", "D6", "D7", "B4", "B5", "B6", "C6", "C7", "F7", "F6", "F5", "F4", "F1"],
+ "rows": ["B0", "B7", "D0", "D1", "D2"]
+ },
+ "diode_direction": "COL2ROW",
"processor": "atmega32u4",
"bootloader": "atmel-dfu",
"layouts": {
diff --git a/keyboards/contender/config.h b/keyboards/contender/config.h
index e81b8a2094..2371ec5ef1 100644
--- a/keyboards/contender/config.h
+++ b/keyboards/contender/config.h
@@ -17,23 +17,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
#pragma once
-
-/*
- * Keyboard Matrix Assignments
- *
- * Change this to how you wired your keyboard
- * COLS: AVR pins used for columns, left to right
- * ROWS: AVR pins used for rows, top to bottom
- * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
- * ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
- *
- */
-#define MATRIX_ROW_PINS { D4, D3, B5, B7, B4, B2 }
-#define MATRIX_COL_PINS { C7, D6, B3, B0, B1 }
-
-/* COL2ROW, ROW2COL */
-#define DIODE_DIRECTION COL2ROW
-
#define RGB_DI_PIN C6
#define RGBLED_NUM 33
#define RGBLIGHT_LED_MAP { \
diff --git a/keyboards/contender/info.json b/keyboards/contender/info.json
index 942963aaee..385aad6e0e 100644
--- a/keyboards/contender/info.json
+++ b/keyboards/contender/info.json
@@ -8,6 +8,11 @@
"pid": "0xC010",
"device_version": "0.0.1"
},
+ "matrix_pins": {
+ "cols": ["C7", "D6", "B3", "B0", "B1"],
+ "rows": ["D4", "D3", "B5", "B7", "B4", "B2"]
+ },
+ "diode_direction": "COL2ROW",
"processor": "atmega32u2",
"bootloader": "atmel-dfu",
"layouts": {
diff --git a/keyboards/converter/a1200/miss1200/config.h b/keyboards/converter/a1200/miss1200/config.h
deleted file mode 100644
index 07e8b9ac93..0000000000
--- a/keyboards/converter/a1200/miss1200/config.h
+++ /dev/null
@@ -1,40 +0,0 @@
-/*
-Copyright 2021 8bits4ever
-
-This program is free software: you can redistribute it and/or modify
-it under the terms of the GNU General Public License as published by
-the Free Software Foundation, either version 2 of the License, or
-(at your option) any later version.
-
-This program is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-GNU General Public License for more details.
-
-You should have received a copy of the GNU General Public License
-along with this program. If not, see <http://www.gnu.org/licenses/>.
-*/
-
-#pragma once
-
-
-/*
- * Keyboard Matrix Assignments
- *
- * Change this to how you wired your keyboard
- * COLS: AVR pins used for columns, left to right
- * ROWS: AVR pins used for rows, top to bottom
- * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
- * ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
- *
-*/
-#define MATRIX_ROW_PINS { F7, F6, F5, F4, F1, F0, B1, B3 }
-#define MATRIX_COL_PINS { D0, D1, C7, D6, B7, B6, B5, B4, E6, D7, C6, D4, B2, D5, D3, D2 }
-
-/* COL2ROW, ROW2COL*/
-#define DIODE_DIRECTION ROW2COL
-
-/* disable action features */
-//#define NO_ACTION_LAYER
-//#define NO_ACTION_TAPPING
-//#define NO_ACTION_ONESHOT
diff --git a/keyboards/converter/a1200/miss1200/info.json b/keyboards/converter/a1200/miss1200/info.json
index 326d73ec83..74d569b8d9 100644
--- a/keyboards/converter/a1200/miss1200/info.json
+++ b/keyboards/converter/a1200/miss1200/info.json
@@ -6,6 +6,11 @@
"pid": "0x0000",
"device_version": "0.0.1"
},
+ "matrix_pins": {
+ "cols": ["D0", "D1", "C7", "D6", "B7", "B6", "B5", "B4", "E6", "D7", "C6", "D4", "B2", "D5", "D3", "D2"],
+ "rows": ["F7", "F6", "F5", "F4", "F1", "F0", "B1", "B3"]
+ },
+ "diode_direction": "ROW2COL",
"indicators": {
"caps_lock": "B0",
"on_state": 0
diff --git a/keyboards/converter/a1200/mistress1200/config.h b/keyboards/converter/a1200/mistress1200/config.h
index 6b2204ec43..21ba99e0b7 100644
--- a/keyboards/converter/a1200/mistress1200/config.h
+++ b/keyboards/converter/a1200/mistress1200/config.h
@@ -17,23 +17,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
#pragma once
-
-/*
- * Keyboard Matrix Assignments
- *
- * Change this to how you wired your keyboard
- * COLS: AVR pins used for columns, left to right
- * ROWS: AVR pins used for rows, top to bottom
- * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
- * ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
- *
-*/
-#define MATRIX_ROW_PINS { F7, F6, F5, F4, F1, F0, B1, B3 }
-#define MATRIX_COL_PINS { D0, D1, C7, D6, B7, B6, B5, B4, E6, D7, C6, D4, B2, D5, D3, D2 }
-
-/* COL2ROW, ROW2COL*/
-#define DIODE_DIRECTION ROW2COL
-
#define TAPPING_TOGGLE 3
#undef LOCKING_SUPPORT_ENABLE
diff --git a/keyboards/converter/a1200/mistress1200/info.json b/keyboards/converter/a1200/mistress1200/info.json
index dfbe75c79c..c37bdadd61 100644
--- a/keyboards/converter/a1200/mistress1200/info.json
+++ b/keyboards/converter/a1200/mistress1200/info.json
@@ -6,6 +6,11 @@
"pid": "0x0000",
"device_version": "0.0.1"
},
+ "matrix_pins": {
+ "cols": ["D0", "D1", "C7", "D6", "B7", "B6", "B5", "B4", "E6", "D7", "C6", "D4", "B2", "D5", "D3", "D2"],
+ "rows": ["F7", "F6", "F5", "F4", "F1", "F0", "B1", "B3"]
+ },
+ "diode_direction": "ROW2COL",
"indicators": {
"caps_lock": "B0",
"on_state": 0
diff --git a/keyboards/converter/a1200/teensy2pp/config.h b/keyboards/converter/a1200/teensy2pp/config.h
deleted file mode 100644
index c859413d18..0000000000
--- a/keyboards/converter/a1200/teensy2pp/config.h
+++ /dev/null
@@ -1,40 +0,0 @@
-/*
-Copyright 2021 8bits4ever
-
-This program is free software: you can redistribute it and/or modify
-it under the terms of the GNU General Public License as published by
-the Free Software Foundation, either version 2 of the License, or
-(at your option) any later version.
-
-This program is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-GNU General Public License for more details.
-
-You should have received a copy of the GNU General Public License
-along with this program. If not, see <http://www.gnu.org/licenses/>.
-*/
-
-#pragma once
-
-
-/*
- * Keyboard Matrix Assignments
- *
- * Change this to how you wired your keyboard
- * COLS: AVR pins used for columns, left to right
- * ROWS: AVR pins used for rows, top to bottom
- * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
- * ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
- *
-*/
-#define MATRIX_ROW_PINS { F0, F1, F2, F3, F4, F5, F6, F7 }
-#define MATRIX_COL_PINS { D2, D3, D4, D5, D6, D7, E0, E1, C0, C1, C2, C3, C4, C5, C6, C7 }
-
-/* COL2ROW, ROW2COL*/
-#define DIODE_DIRECTION ROW2COL
-
-/* disable action features */
-//#define NO_ACTION_LAYER
-//#define NO_ACTION_TAPPING
-//#define NO_ACTION_ONESHOT
diff --git a/keyboards/converter/a1200/teensy2pp/info.json b/keyboards/converter/a1200/teensy2pp/info.json
index a69aa38278..e4d0c09c0f 100644
--- a/keyboards/converter/a1200/teensy2pp/info.json
+++ b/keyboards/converter/a1200/teensy2pp/info.json
@@ -6,6 +6,11 @@
"pid": "0x0000",
"device_version": "0.0.1"
},
+ "matrix_pins": {
+ "cols": ["D2", "D3", "D4", "D5", "D6", "D7", "E0", "E1", "C0", "C1", "C2", "C3", "C4", "C5", "C6", "C7"],
+ "rows": ["F0", "F1", "F2", "F3", "F4", "F5", "F6", "F7"]
+ },
+ "diode_direction": "ROW2COL",
"indicators": {
"caps_lock": "B6"
},
diff --git a/keyboards/converter/modelm101/config.h b/keyboards/converter/modelm101/config.h
index 00d991fcc8..764fb56f64 100644
--- a/keyboards/converter/modelm101/config.h
+++ b/keyboards/converter/modelm101/config.h
@@ -17,23 +17,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
#pragma once
-
-/*
- * Keyboard Matrix Assignments
- *
- * Change this to how you wired your keyboard
- * COLS: AVR pins used for columns, left to right
- * ROWS: AVR pins used for rows, top to bottom
- * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
- * ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
- *
-*/
-#define MATRIX_ROW_PINS { F7, F6, F5, F4, F3, F2, F1, F0 }
-#define MATRIX_COL_PINS { C7, C6, C5, C4, C3, C2, C1, C0, E1, E0, D7, D6, D5, D4, D3, D2 }
-
-/* COL2ROW, ROW2COL*/
-#define DIODE_DIRECTION ROW2COL
-
/* The Model M has no diodes */
#define MATRIX_HAS_GHOST
diff --git a/keyboards/converter/modelm101/info.json b/keyboards/converter/modelm101/info.json
index 9bffe2e242..a3698672ba 100644
--- a/keyboards/converter/modelm101/info.json
+++ b/keyboards/converter/modelm101/info.json
@@ -8,6 +8,11 @@
"pid": "0x0000",
"device_version": "0.0.1"
},
+ "matrix_pins": {
+ "cols": ["C7", "C6", "C5", "C4", "C3", "C2", "C1", "C0", "E1", "E0", "D7", "D6", "D5", "D4", "D3", "D2"],
+ "rows": ["F7", "F6", "F5", "F4", "F3", "F2", "F1", "F0"]
+ },
+ "diode_direction": "ROW2COL",
"processor": "at90usb1286",
"bootloader": "halfkay",
"layouts": {
diff --git a/keyboards/converter/modelm101_teensy2/config.h b/keyboards/converter/modelm101_teensy2/config.h
index 7e0e627bd9..764fb56f64 100644
--- a/keyboards/converter/modelm101_teensy2/config.h
+++ b/keyboards/converter/modelm101_teensy2/config.h
@@ -17,23 +17,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
#pragma once
-
-/*
- * Keyboard Matrix Assignments
- *
- * Change this to how you wired your keyboard
- * COLS: AVR pins used for columns, left to right
- * ROWS: AVR pins used for rows, top to bottom
- * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
- * ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
- *
-*/
-#define MATRIX_ROW_PINS { D0, D1, D2, D3, C6, C7, D5, D4 }
-#define MATRIX_COL_PINS { F0, F1, F4, F5, F6, F7, B6, B5, B4, D7, D6, B0, B1, B2, B3, B7 }
-
-/* COL2ROW, ROW2COL*/
-#define DIODE_DIRECTION ROW2COL
-
/* The Model M has no diodes */
#define MATRIX_HAS_GHOST
diff --git a/keyboards/converter/modelm101_teensy2/info.json b/keyboards/converter/modelm101_teensy2/info.json
index 12ee7274d7..efeb041c3c 100644
--- a/keyboards/converter/modelm101_teensy2/info.json
+++ b/keyboards/converter/modelm101_teensy2/info.json
@@ -8,6 +8,11 @@
"pid": "0x0000",
"device_version": "0.0.1"
},
+ "matrix_pins": {
+ "cols": ["F0", "F1", "F4", "F5", "F6", "F7", "B6", "B5", "B4", "D7", "D6", "B0", "B1", "B2", "B3", "B7"],
+ "rows": ["D0", "D1", "D2", "D3", "C6", "C7", "D5", "D4"]
+ },
+ "diode_direction": "ROW2COL",
"indicators": {
"caps_lock": "E6",
"on_state": 0
diff --git a/keyboards/converter/modelm_ssk/config.h b/keyboards/converter/modelm_ssk/config.h
index f38e3db3dd..3b6e758833 100644
--- a/keyboards/converter/modelm_ssk/config.h
+++ b/keyboards/converter/modelm_ssk/config.h
@@ -17,23 +17,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
#pragma once
-
-/*
- * Keyboard Matrix Assignments
- *
- * Change this to how you wired your keyboard
- * COLS: AVR pins used for columns, left to right
- * ROWS: AVR pins used for rows, top to bottom
- * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
- * ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
- *
-*/
-#define MATRIX_COL_PINS { C7, C6, C5, C4, C3, C2, C1, C0, E1, E0, D7, D5, D4, D3, D2, D1 }
-#define MATRIX_ROW_PINS { F0, F1, F2, F3, F4, F5, F6, F7 }
-
-/* COL2ROW, ROW2COL*/
-#define DIODE_DIRECTION ROW2COL
-
/* The Model M does not have NKRO */
#define MATRIX_HAS_GHOST
diff --git a/keyboards/converter/modelm_ssk/info.json b/keyboards/converter/modelm_ssk/info.json
index 3f947eac2a..d68bb0389f 100644
--- a/keyboards/converter/modelm_ssk/info.json
+++ b/keyboards/converter/modelm_ssk/info.json
@@ -8,6 +8,11 @@
"pid": "0x0000",
"device_version": "0.0.1"
},
+ "matrix_pins": {
+ "cols": ["C7", "C6", "C5", "C4", "C3", "C2", "C1", "C0", "E1", "E0", "D7", "D5", "D4", "D3", "D2", "D1"],
+ "rows": ["F0", "F1", "F2", "F3", "F4", "F5", "F6", "F7"]
+ },
+ "diode_direction": "ROW2COL",
"indicators": {
"caps_lock": "B6",
"num_lock": "B4",
diff --git a/keyboards/converter/numeric_keypad_iie/config.h b/keyboards/converter/numeric_keypad_iie/config.h
deleted file mode 100644
index 81671354fd..0000000000
--- a/keyboards/converter/numeric_keypad_iie/config.h
+++ /dev/null
@@ -1,87 +0,0 @@
-/*
-Copyright 2019 Adam Newbold <adam@neatnik.net>
-
-This program is free software: you can redistribute it and/or modify
-it under the terms of the GNU General Public License as published by
-the Free Software Foundation, either version 2 of the License, or
-(at your option) any later version.
-
-This program is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-GNU General Public License for more details.
-
-You should have received a copy of the GNU General Public License
-along with this program. If not, see <http://www.gnu.org/licenses/>.
-*/
-
-#pragma once
-
-
-/*
-
-Pin Mappings
-============
-
-Dsub-15 Connection
-------------------
-
- Dsub-15 (female)
- ,-------------------------.
- \ 08 07 06 05 04 03 02 01 /
- \ 15 14 13 12 11 10 09 /
- `---------------------'
-
-Header Pins
------------
- _____________________________________
-| |
-| 11 10 9 8 7 6 5 4 3 2 1 |
-|_____________________________________|
-
-
-Header / Matrix
----------------
-
-Pin Name Description
---------------------------------------------------------------
-1,2,5,3,4,6 Y0-Y5 Y-direction key-matrix connections
-7 NC
-9,11,10,8 X4-X7 X-direction key-matrix connections
-
-
-Microcontroller Configuration
------------------------------
-
-(Pins are for an Arduino Micro)
-
-+-----------------------------------+
-| Dsub-15 | Header | Matrix | Micro |
-|---------+--------+--------+-------|
-| 12 | 11 | X5 | B0 |
-| 11 | 10 | X6 | D3 |
-| 10 | 9 | X4 | B2 |
-| 9 | 8 | X7 | D2 |
-| NC | 7 | NC | -- |
-| 7 | 6 | Y5 | E6 |
-| 6 | 5 | Y2 | D4 |
-| 5 | 4 | Y4 | D7 |
-| 3 | 3 | Y3 | C6 |
-| 2 | 2 | Y1 | D0 |
-| 1 | 1 | Y0 | D1 |
-+-----------------------------------+
-
-Note: Dsub-15 pins 4, 8, 13, 14, and 15 are unused
-
-Reference
----------
-
-https://deskthority.net/wiki/Apple_Numeric_Keypad_IIe
-https://geekhack.org/index.php?topic=78048.0
-http://wiki.apple2.org/index.php?title=Pinouts#Apple_.2F.2Fe_Numeric_Keypad_connector
-
-*/
-
-#define MATRIX_ROW_PINS { B0, B2, D2, D3 }
-#define MATRIX_COL_PINS { D1, D0, D4, C6, D7, E6 }
-#define DIODE_DIRECTION COL2ROW
diff --git a/keyboards/converter/numeric_keypad_iie/info.json b/keyboards/converter/numeric_keypad_iie/info.json
index 41b75f69b9..ae160c7038 100644
--- a/keyboards/converter/numeric_keypad_iie/info.json
+++ b/keyboards/converter/numeric_keypad_iie/info.json
@@ -8,6 +8,11 @@
"pid": "0x0000",
"device_version": "0.0.1"
},
+ "matrix_pins": {
+ "cols": ["D1", "D0", "D4", "C6", "D7", "E6"],
+ "rows": ["B0", "B2", "D2", "D3"]
+ },
+ "diode_direction": "COL2ROW",
"processor": "atmega32u4",
"bootloader": "caterina",
"layouts": {
diff --git a/keyboards/converter/siemens_tastatur/config.h b/keyboards/converter/siemens_tastatur/config.h
index b21326d298..49725a9592 100644
--- a/keyboards/converter/siemens_tastatur/config.h
+++ b/keyboards/converter/siemens_tastatur/config.h
@@ -21,11 +21,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
#define MATRIX_ROWS 5
#define MATRIX_COLS 19
-//This is all fake and not used
-#define MATRIX_COL_PINS { B11, B10, B1, B0, A7, A6, A5, A4, A3, A2, A1, A0, C15, C14, NO_PIN, NO_PIN, NO_PIN, NO_PIN, NO_PIN }
-#define MATRIX_ROW_PINS { B3, B4, B5, B6, B7 }
-#define DIODE_DIRECTION COL2ROW
-
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
#define LOCKING_SUPPORT_ENABLE
/* Locking resynchronize hack */
diff --git a/keyboards/cool836a/config.h b/keyboards/cool836a/config.h
index 1010646969..886f8a69f1 100644
--- a/keyboards/cool836a/config.h
+++ b/keyboards/cool836a/config.h
@@ -17,24 +17,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
#pragma once
-
-/*
- * Keyboard Matrix Assignments
- *
- * Change this to how you wired your keyboard
- * COLS: AVR pins used for columns, left to right
- * ROWS: AVR pins used for rows, top to bottom
- * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
- * ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
- *
- */
-#define MATRIX_ROW_PINS { D1, B5, B4, F4, B1, B6 }
-#define MATRIX_COL_PINS { F5, D0, B2, C6, D7, E6 }
-
-/* COL2ROW, ROW2COL */
-//#define DIODE_DIRECTION COL2ROW
-#define DIODE_DIRECTION ROW2COL
-
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
#define LOCKING_SUPPORT_ENABLE
/* Locking resynchronize hack */
diff --git a/keyboards/cool836a/info.json b/keyboards/cool836a/info.json
index e2488c43e0..bcdbbef97c 100644
--- a/keyboards/cool836a/info.json
+++ b/keyboards/cool836a/info.json
@@ -8,6 +8,11 @@
"pid": "0x0000",
"device_version": "0.0.1"
},
+ "matrix_pins": {
+ "cols": ["F5", "D0", "B2", "C6", "D7", "E6"],
+ "rows": ["D1", "B5", "B4", "F4", "B1", "B6"]
+ },
+ "diode_direction": "ROW2COL",
"processor": "atmega32u4",
"bootloader": "atmel-dfu",
"layouts": {
diff --git a/keyboards/copenhagen_click/click_pad_v1/config.h b/keyboards/copenhagen_click/click_pad_v1/config.h
index 2f30b0bb1c..970e69e7f6 100755
--- a/keyboards/copenhagen_click/click_pad_v1/config.h
+++ b/keyboards/copenhagen_click/click_pad_v1/config.h
@@ -17,23 +17,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
#pragma once
-
-/*
- * Keyboard Matrix Assignments
- *
- * Change this to how you wired your keyboard
- * COLS: AVR pins used for columns, left to right
- * ROWS: AVR pins used for rows, top to bottom
- * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
- * ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
- *
-*/
-#define MATRIX_ROW_PINS { F7 }
-#define MATRIX_COL_PINS { F5 }
-
-/* COL2ROW, ROW2COL*/
-#define DIODE_DIRECTION COL2ROW
-
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
#define LOCKING_SUPPORT_ENABLE
/* Locking resynchronize hack */
diff --git a/keyboards/copenhagen_click/click_pad_v1/info.json b/keyboards/copenhagen_click/click_pad_v1/info.json
index f6abac2e6a..1298de4c89 100755
--- a/keyboards/copenhagen_click/click_pad_v1/info.json
+++ b/keyboards/copenhagen_click/click_pad_v1/info.json
@@ -8,6 +8,11 @@
"pid": "0x27DB",
"device_version": "0.0.1"
},
+ "matrix_pins": {
+ "cols": ["F5"],
+ "rows": ["F7"]
+ },
+ "diode_direction": "COL2ROW",
"backlight": {
"pin": "B5",
"breathing": true
diff --git a/keyboards/coseyfannitutti/discipad/config.h b/keyboards/coseyfannitutti/discipad/config.h
index 0f304c68b5..edcaedfb79 100644
--- a/keyboards/coseyfannitutti/discipad/config.h
+++ b/keyboards/coseyfannitutti/discipad/config.h
@@ -17,25 +17,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
#pragma once
-
-/*
- * Keyboard Matrix Assignments
- *
- * Change this to how you wired your keyboard
- * COLS: AVR pins used for columns, left to right
- * ROWS: AVR pins used for rows, top to bottom
- * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
- * ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
- *
- */
-
-/* A Custom matrix.c is used to poll the port expander C6 shows that the pins are hardwired there */
-#define MATRIX_ROW_PINS { B1, B0, D7, D6, D4 }
-#define MATRIX_COL_PINS { C0, C1, C2, C3 }
-
-/* COL2ROW, ROW2COL*/
-#define DIODE_DIRECTION COL2ROW
-
#define USB_MAX_POWER_CONSUMPTION 100
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
diff --git a/keyboards/coseyfannitutti/discipad/info.json b/keyboards/coseyfannitutti/discipad/info.json
index ac3d9a07c5..86a6836466 100644
--- a/keyboards/coseyfannitutti/discipad/info.json
+++ b/keyboards/coseyfannitutti/discipad/info.json
@@ -8,6 +8,11 @@
"pid": "0x1769",
"device_version": "0.0.1"
},
+ "matrix_pins": {
+ "cols": ["C0", "C1", "C2", "C3"],
+ "rows": ["B1", "B0", "D7", "D6", "D4"]
+ },
+ "diode_direction": "COL2ROW",
"processor": "atmega328p",
"bootloader": "usbasploader",
"layouts": {
diff --git a/keyboards/coseyfannitutti/discipline/config.h b/keyboards/coseyfannitutti/discipline/config.h
index e91656f198..d43ae80cb9 100644
--- a/keyboards/coseyfannitutti/discipline/config.h
+++ b/keyboards/coseyfannitutti/discipline/config.h
@@ -16,24 +16,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
#pragma once
-
-/*
- * Keyboard Matrix Assignments
- *
- * Change this to how you wired your keyboard
- * COLS: AVR pins used for columns, left to right
- * ROWS: AVR pins used for rows, top to bottom
- * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
- * ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
- *
- */
-
-#define MATRIX_ROW_PINS { B2, A1, B1, A0, B0 }
-#define MATRIX_COL_PINS { A2, B3, A3, B4, A4, D5, D6, C6, C5, C4, C3, C2, C1, C0, D7 }
-
-/* COL2ROW, ROW2COL*/
-#define DIODE_DIRECTION COL2ROW
-
#define USB_MAX_POWER_CONSUMPTION 100
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
diff --git a/keyboards/coseyfannitutti/discipline/info.json b/keyboards/coseyfannitutti/discipline/info.json
index aa1afd9fcc..0f947f807a 100644
--- a/keyboards/coseyfannitutti/discipline/info.json
+++ b/keyboards/coseyfannitutti/discipline/info.json
@@ -8,6 +8,11 @@
"pid": "0x6869",
"device_version": "0.0.1"
},
+ "matrix_pins": {
+ "cols": ["A2", "B3", "A3", "B4", "A4", "D5", "D6", "C6", "C5", "C4", "C3", "C2", "C1", "C0", "D7"],
+ "rows": ["B2", "A1", "B1", "A0", "B0"]
+ },
+ "diode_direction": "COL2ROW",
"processor": "atmega32a",
"bootloader": "usbasploader",
"layout_aliases": {
diff --git a/keyboards/coseyfannitutti/mullet/config.h b/keyboards/coseyfannitutti/mullet/config.h
index 5ee6b135fc..d56fccaf1f 100644
--- a/keyboards/coseyfannitutti/mullet/config.h
+++ b/keyboards/coseyfannitutti/mullet/config.h
@@ -17,23 +17,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
#pragma once
-
-/*
- * Keyboard Matrix Assignments
- *
- * Change this to how you wired your keyboard
- * COLS: AVR pins used for columns, left to right
- * ROWS: AVR pins used for rows, top to bottom
- * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
- * ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
- *
-*/
-#define MATRIX_ROW_PINS { D0, D1, B0, F0, F1 }
-#define MATRIX_COL_PINS { B2, F4, F5, F6, F7, C7, C6, B6, B5, B4, D7, D6, D4, D2, D3 }
-
-/* COL2ROW, ROW2COL */
-#define DIODE_DIRECTION COL2ROW
-
#define RGB_DI_PIN D5
#ifdef RGB_DI_PIN
#define RGBLIGHT_EFFECT_BREATHING
diff --git a/keyboards/coseyfannitutti/mullet/info.json b/keyboards/coseyfannitutti/mullet/info.json
index 8bdb22f18d..fc2f47c2c0 100644
--- a/keyboards/coseyfannitutti/mullet/info.json
+++ b/keyboards/coseyfannitutti/mullet/info.json
@@ -8,6 +8,11 @@
"pid": "0x6969",
"device_version": "0.0.1"
},
+ "matrix_pins": {
+ "cols": ["B2", "F4", "F5", "F6", "F7", "C7", "C6", "B6", "B5", "B4", "D7", "D6", "D4", "D2", "D3"],
+ "rows": ["D0", "D1", "B0", "F0", "F1"]
+ },
+ "diode_direction": "COL2ROW",
"processor": "atmega32u4",
"bootloader": "atmel-dfu",
"layouts": {
diff --git a/keyboards/coseyfannitutti/mulletpad/config.h b/keyboards/coseyfannitutti/mulletpad/config.h
deleted file mode 100644
index 6cd992c919..0000000000
--- a/keyboards/coseyfannitutti/mulletpad/config.h
+++ /dev/null
@@ -1,51 +0,0 @@
-/*
-Copyright 2019 COSEYFANNITUTTI
-
-This program is free software: you can redistribute it and/or modify
-it under the terms of the GNU General Public License as published by
-the Free Software Foundation, either version 2 of the License, or
-(at your option) any later version.
-
-This program is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-GNU General Public License for more details.
-
-You should have received a copy of the GNU General Public License
-along with this program. If not, see <http://www.gnu.org/licenses/>.
-*/
-
-#pragma once
-
-
-/*
- * Keyboard Matrix Assignments
- *
- * Change this to how you wired your keyboard
- * COLS: AVR pins used for columns, left to right
- * ROWS: AVR pins used for rows, top to bottom
- * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
- * ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
- *
-*/
-#define MATRIX_ROW_PINS { F4, F1, F5, F6, F7 }
-#define MATRIX_COL_PINS { F0, C7, C6, B6 }
-
-/* COL2ROW, ROW2COL */
-#define DIODE_DIRECTION COL2ROW
-
-/*
- * Feature disable options
- * These options are also useful to firmware size reduction.
- */
-
-/* disable debug print */
-//#define NO_DEBUG
-
-/* disable print */
-//#define NO_PRINT
-
-/* disable action features */
-//#define NO_ACTION_LAYER
-//#define NO_ACTION_TAPPING
-//#define NO_ACTION_ONESHOT
diff --git a/keyboards/coseyfannitutti/mulletpad/info.json b/keyboards/coseyfannitutti/mulletpad/info.json
index be3ef711cc..48b3df3c83 100644
--- a/keyboards/coseyfannitutti/mulletpad/info.json
+++ b/keyboards/coseyfannitutti/mulletpad/info.json
@@ -8,6 +8,11 @@
"pid": "0x6666",
"device_version": "0.0.1"
},
+ "matrix_pins": {
+ "cols": ["F0", "C7", "C6", "B6"],
+ "rows": ["F4", "F1", "F5", "F6", "F7"]
+ },
+ "diode_direction": "COL2ROW",
"processor": "atmega32u4",
"bootloader": "atmel-dfu",
"community_layouts": ["numpad_5x4"],
diff --git a/keyboards/coseyfannitutti/mysterium/config.h b/keyboards/coseyfannitutti/mysterium/config.h
index 2c9c5629cf..0acee7345a 100644
--- a/keyboards/coseyfannitutti/mysterium/config.h
+++ b/keyboards/coseyfannitutti/mysterium/config.h
@@ -16,24 +16,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
#pragma once
-
-/*
- * Keyboard Matrix Assignments
- *
- * Change this to how you wired your keyboard
- * COLS: AVR pins used for columns, left to right
- * ROWS: AVR pins used for rows, top to bottom
- * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
- * ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
- *
- */
-/* 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17*/
-#define MATRIX_ROW_PINS { C2, C3, C7, C4, C6, C5 }
-#define MATRIX_COL_PINS { A0, B0, A1, B1, A2, B2, A3, B3, A4, B4, A5, A6, A7, D6, D5, D1, D0, D7 }
-
-/* COL2ROW, ROW2COL*/
-#define DIODE_DIRECTION COL2ROW
-
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
#define LOCKING_SUPPORT_ENABLE
/* Locking resynchronize hack */
diff --git a/keyboards/coseyfannitutti/mysterium/info.json b/keyboards/coseyfannitutti/mysterium/info.json
index f89161a596..945652ed49 100644
--- a/keyboards/coseyfannitutti/mysterium/info.json
+++ b/keyboards/coseyfannitutti/mysterium/info.json
@@ -8,6 +8,11 @@
"pid": "0x8769",
"device_version": "0.0.1"
},
+ "matrix_pins": {
+ "cols": ["A0", "B0", "A1", "B1", "A2", "B2", "A3", "B3", "A4", "B4", "A5", "A6", "A7", "D6", "D5", "D1", "D0", "D7"],
+ "rows": ["C2", "C3", "C7", "C4", "C6", "C5"]
+ },
+ "diode_direction": "COL2ROW",
"processor": "atmega32a",
"bootloader": "usbasploader",
"community_layouts": ["tkl_ansi"],
diff --git a/keyboards/coseyfannitutti/romeo/config.h b/keyboards/coseyfannitutti/romeo/config.h
index ea75f82f4b..31a3fe8cb0 100644
--- a/keyboards/coseyfannitutti/romeo/config.h
+++ b/keyboards/coseyfannitutti/romeo/config.h
@@ -17,26 +17,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
#pragma once
-
-/*
- * Keyboard Matrix Assignments
- *
- * Change this to how you wired your keyboard
- * COLS: AVR pins used for columns, left to right
- * ROWS: AVR pins used for rows, top to bottom
- * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
- * ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
- *
- */
-
-/* A Custom matrix.c is used to poll the port expander C6 shows that the pins are hardwired there */
-/* 0 1 2 3 4 5 6 7 8 9 10 11*/
-#define MATRIX_ROW_PINS { B1, B4, B3, B2 }
-#define MATRIX_COL_PINS { C5, C4, C3, D0, C2, D1, C1, C0, D4, B0, D7, D6 }
-
-/* COL2ROW, ROW2COL*/
-#define DIODE_DIRECTION COL2ROW
-
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
#define LOCKING_SUPPORT_ENABLE
/* Locking resynchronize hack */
diff --git a/keyboards/coseyfannitutti/romeo/info.json b/keyboards/coseyfannitutti/romeo/info.json
index a2dbb61486..e42a0206e4 100644
--- a/keyboards/coseyfannitutti/romeo/info.json
+++ b/keyboards/coseyfannitutti/romeo/info.json
@@ -8,6 +8,11 @@
"pid": "0x4069",
"device_version": "0.0.1"
},
+ "matrix_pins": {
+ "cols": ["C5", "C4", "C3", "D0", "C2", "D1", "C1", "C0", "D4", "B0", "D7", "D6"],
+ "rows": ["B1", "B4", "B3", "B2"]
+ },
+ "diode_direction": "COL2ROW",
"processor": "atmega328p",
"bootloader": "usbasploader",
"layouts": {
diff --git a/keyboards/cosmo65/config.h b/keyboards/cosmo65/config.h
index b8131f5d7d..b8a063e9ab 100644
--- a/keyboards/cosmo65/config.h
+++ b/keyboards/cosmo65/config.h
@@ -27,8 +27,3 @@ along with this program. If not, see http://www.gnu.org/licenses/.
#define RGBLIGHT_EFFECT_STATIC_GRADIENT
#define RGBLIGHT_EFFECT_RGB_TEST
#define RGBLIGHT_EFFECT_ALTERNATING
-
-/* keyboard matrix assignments */
-#define MATRIX_ROW_PINS { D5, D0, F0, F5, F4 }
-#define MATRIX_COL_PINS { E6, D4, D6, D7, B4, B5, B6, C6, C7, D1, D2, D3, F1, F6 }
-#define DIODE_DIRECTION COL2ROW
diff --git a/keyboards/cosmo65/info.json b/keyboards/cosmo65/info.json
index 436e08038d..b98db6c790 100644
--- a/keyboards/cosmo65/info.json
+++ b/keyboards/cosmo65/info.json
@@ -8,6 +8,11 @@
"pid": "0x6331",
"device_version": "0.0.1"
},
+ "matrix_pins": {
+ "cols": ["E6", "D4", "D6", "D7", "B4", "B5", "B6", "C6", "C7", "D1", "D2", "D3", "F1", "F6"],
+ "rows": ["D5", "D0", "F0", "F5", "F4"]
+ },
+ "diode_direction": "COL2ROW",
"processor": "atmega32u4",
"bootloader": "atmel-dfu",
"layouts": {
diff --git a/keyboards/cozykeys/bloomer/v2/config.h b/keyboards/cozykeys/bloomer/v2/config.h
deleted file mode 100644
index 214d5d549b..0000000000
--- a/keyboards/cozykeys/bloomer/v2/config.h
+++ /dev/null
@@ -1,24 +0,0 @@
-/*
-Copyright 2021 Paul Ewing
-
-This program is free software: you can redistribute it and/or modify
-it under the terms of the GNU General Public License as published by
-the Free Software Foundation, either version 2 of the License, or
-(at your option) any later version.
-
-This program is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-GNU General Public License for more details.
-
-You should have received a copy of the GNU General Public License
-along with this program. If not, see <http://www.gnu.org/licenses/>.
-*/
-#pragma once
-
-
-// Keyboard Matrix Assignments
-#define MATRIX_ROW_PINS { D0, D1, D3, D2, D4, B2 }
-#define MATRIX_COL_PINS { F7, F6, F5, F4, F1, F0, B1, B4, C6, E6, B5, B6, B7, D6, C7 }
-#define DIODE_DIRECTION COL2ROW
-
diff --git a/keyboards/cozykeys/bloomer/v2/info.json b/keyboards/cozykeys/bloomer/v2/info.json
index e1963db040..3810d5c40e 100644
--- a/keyboards/cozykeys/bloomer/v2/info.json
+++ b/keyboards/cozykeys/bloomer/v2/info.json
@@ -2,6 +2,11 @@
"usb": {
"device_version": "0.0.2"
},
+ "matrix_pins": {
+ "cols": ["F7", "F6", "F5", "F4", "F1", "F0", "B1", "B4", "C6", "E6", "B5", "B6", "B7", "D6", "C7"],
+ "rows": ["D0", "D1", "D3", "D2", "D4", "B2"]
+ },
+ "diode_direction": "COL2ROW",
"processor": "atmega32u4",
"bootloader": "caterina",
"layouts": {
diff --git a/keyboards/cozykeys/bloomer/v3/config.h b/keyboards/cozykeys/bloomer/v3/config.h
deleted file mode 100644
index 214d5d549b..0000000000
--- a/keyboards/cozykeys/bloomer/v3/config.h
+++ /dev/null
@@ -1,24 +0,0 @@
-/*
-Copyright 2021 Paul Ewing
-
-This program is free software: you can redistribute it and/or modify
-it under the terms of the GNU General Public License as published by
-the Free Software Foundation, either version 2 of the License, or
-(at your option) any later version.
-
-This program is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-GNU General Public License for more details.
-
-You should have received a copy of the GNU General Public License
-along with this program. If not, see <http://www.gnu.org/licenses/>.
-*/
-#pragma once
-
-
-// Keyboard Matrix Assignments
-#define MATRIX_ROW_PINS { D0, D1, D3, D2, D4, B2 }
-#define MATRIX_COL_PINS { F7, F6, F5, F4, F1, F0, B1, B4, C6, E6, B5, B6, B7, D6, C7 }
-#define DIODE_DIRECTION COL2ROW
-
diff --git a/keyboards/cozykeys/bloomer/v3/info.json b/keyboards/cozykeys/bloomer/v3/info.json
index 8540b0878e..0c5e01cd05 100644
--- a/keyboards/cozykeys/bloomer/v3/info.json
+++ b/keyboards/cozykeys/bloomer/v3/info.json
@@ -2,6 +2,11 @@
"usb": {
"device_version": "0.0.3"
},
+ "matrix_pins": {
+ "cols": ["F7", "F6", "F5", "F4", "F1", "F0", "B1", "B4", "C6", "E6", "B5", "B6", "B7", "D6", "C7"],
+ "rows": ["D0", "D1", "D3", "D2", "D4", "B2"]
+ },
+ "diode_direction": "COL2ROW",
"processor": "atmega32u4",
"bootloader": "caterina",
"layouts": {
diff --git a/keyboards/cozykeys/speedo/v2/config.h b/keyboards/cozykeys/speedo/v2/config.h
index 6752b3934a..2643e4de4a 100644
--- a/keyboards/cozykeys/speedo/v2/config.h
+++ b/keyboards/cozykeys/speedo/v2/config.h
@@ -16,12 +16,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
#pragma once
-
-// Keyboard Matrix Assignments
-#define MATRIX_ROW_PINS { D1, D2, D3, C6, C7 }
-#define MATRIX_COL_PINS { F0, F1, F4, F5, F6, F7, B6, B5, D0, B7, B3, B2, B1, B0 }
-#define DIODE_DIRECTION COL2ROW
-
// Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap
#define LOCKING_SUPPORT_ENABLE
// Locking resynchronize hack
diff --git a/keyboards/cozykeys/speedo/v2/info.json b/keyboards/cozykeys/speedo/v2/info.json
index 6527ed1257..0e94558e17 100644
--- a/keyboards/cozykeys/speedo/v2/info.json
+++ b/keyboards/cozykeys/speedo/v2/info.json
@@ -8,6 +8,11 @@
"pid": "0x1192",
"device_version": "0.0.2"
},
+ "matrix_pins": {
+ "cols": ["F0", "F1", "F4", "F5", "F6", "F7", "B6", "B5", "D0", "B7", "B3", "B2", "B1", "B0"],
+ "rows": ["D1", "D2", "D3", "C6", "C7"]
+ },
+ "diode_direction": "COL2ROW",
"processor": "atmega32u4",
"bootloader": "halfkay",
"layouts": {
diff --git a/keyboards/cozykeys/speedo/v3/config.h b/keyboards/cozykeys/speedo/v3/config.h
index 885b09d0ba..85beda5e41 100644
--- a/keyboards/cozykeys/speedo/v3/config.h
+++ b/keyboards/cozykeys/speedo/v3/config.h
@@ -16,12 +16,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
#pragma once
-
-// Keyboard Matrix Assignments
-#define MATRIX_ROW_PINS { F0, F1, C7, D5, B7 }
-#define MATRIX_COL_PINS { F4, F5, F6, F7, B1, B3, B6, B2, E6, D7, C6, D4, D0, D1 }
-#define DIODE_DIRECTION COL2ROW
-
#ifdef RGBLIGHT_ENABLE
#define RGB_DI_PIN B5
#define RGBLED_NUM 12
diff --git a/keyboards/cozykeys/speedo/v3/info.json b/keyboards/cozykeys/speedo/v3/info.json
index 2aa0d94485..a1a3bc18e4 100644
--- a/keyboards/cozykeys/speedo/v3/info.json
+++ b/keyboards/cozykeys/speedo/v3/info.json
@@ -8,6 +8,11 @@
"pid": "0x1192",
"device_version": "0.0.3"
},
+ "matrix_pins": {
+ "cols": ["F4", "F5", "F6", "F7", "B1", "B3", "B6", "B2", "E6", "D7", "C6", "D4", "D0", "D1"],
+ "rows": ["F0", "F1", "C7", "D5", "B7"]
+ },
+ "diode_direction": "COL2ROW",
"processor": "atmega32u4",
"bootloader": "atmel-dfu",
"layouts": {
diff --git a/keyboards/craftwalk/config.h b/keyboards/craftwalk/config.h
index fdf42006ff..5b878f779e 100644
--- a/keyboards/craftwalk/config.h
+++ b/keyboards/craftwalk/config.h
@@ -17,23 +17,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
#pragma once
-
-/*
- * Keyboard Matrix Assignments
- *
- * Change this to how you wired your keyboard
- * COLS: AVR pins used for columns, left to right
- * ROWS: AVR pins used for rows, top to bottom
- * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
- * ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
- *
- */
-#define MATRIX_ROW_PINS { F6, B3, B5 }
-#define MATRIX_COL_PINS { B1, F7, F5, F4, B2, E6, B4 }
-
-/* COL2ROW, ROW2COL*/
-#define DIODE_DIRECTION COL2ROW
-
#define RGB_DI_PIN D3
#ifdef RGB_DI_PIN
#define RGBLED_NUM 19
diff --git a/keyboards/craftwalk/info.json b/keyboards/craftwalk/info.json
index 6fd1b7cea6..67c7fe6525 100644
--- a/keyboards/craftwalk/info.json
+++ b/keyboards/craftwalk/info.json
@@ -8,6 +8,11 @@
"pid": "0x2E8F",
"device_version": "0.0.1"
},
+ "matrix_pins": {
+ "cols": ["B1", "F7", "F5", "F4", "B2", "E6", "B4"],
+ "rows": ["F6", "B3", "B5"]
+ },
+ "diode_direction": "COL2ROW",
"processor": "atmega32u4",
"bootloader": "caterina",
"layouts": {
diff --git a/keyboards/crawlpad/config.h b/keyboards/crawlpad/config.h
index f0c5263403..9a38384749 100755
--- a/keyboards/crawlpad/config.h
+++ b/keyboards/crawlpad/config.h
@@ -1,16 +1,8 @@
#pragma once
-
-/* key matrix pins */
-#define MATRIX_ROW_PINS { F0, F1, F4, F5 }
-#define MATRIX_COL_PINS { D4, D5, D6, D7 }
-
/* Pins for custom per-row LEDs. Should be changed to use named pins. */
#define LED_ROW_PINS { 8, 9, 10, 11 }
-/* COL2ROW or ROW2COL */
-#define DIODE_DIRECTION ROW2COL
-
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
#define LOCKING_SUPPORT_ENABLE
diff --git a/keyboards/crawlpad/info.json b/keyboards/crawlpad/info.json
index 0cdc5ef29a..11582d861f 100644
--- a/keyboards/crawlpad/info.json
+++ b/keyboards/crawlpad/info.json
@@ -8,6 +8,11 @@
"pid": "0x6070",
"device_version": "0.0.1"
},
+ "matrix_pins": {
+ "cols": ["D4", "D5", "D6", "D7"],
+ "rows": ["F0", "F1", "F4", "F5"]
+ },
+ "diode_direction": "ROW2COL",
"processor": "atmega32u4",
"bootloader": "atmel-dfu",
"community_layouts": ["ortho_4x4"],
diff --git a/keyboards/crazy_keyboard_68/config.h b/keyboards/crazy_keyboard_68/config.h
index 15f68b19b2..5298ea8a77 100644
--- a/keyboards/crazy_keyboard_68/config.h
+++ b/keyboards/crazy_keyboard_68/config.h
@@ -17,23 +17,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
#pragma once
-
-/*
- * Keyboard Matrix Assignments
- *
- * Change this to how you wired your keyboard
- * COLS: AVR pins used for columns, left to right
- * ROWS: AVR pins used for rows, top to bottom
- * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
- * ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
- *
- */
-#define MATRIX_ROW_PINS { D0, D1, D2, D3, D5 }
-#define MATRIX_COL_PINS { F0, F1, E6, C7, C6, B6, D4, B1, B7, B5, B4, D7, D6, B3, F4 }
-
-/* COL2ROW, ROW2COL */
-#define DIODE_DIRECTION COL2ROW
-
#define RGB_DI_PIN F6
#ifdef RGB_DI_PIN
# define RGBLED_NUM 84
diff --git a/keyboards/crazy_keyboard_68/info.json b/keyboards/crazy_keyboard_68/info.json
index 740813ff4d..f1519acc41 100644
--- a/keyboards/crazy_keyboard_68/info.json
+++ b/keyboards/crazy_keyboard_68/info.json
@@ -8,6 +8,11 @@
"pid": "0x13DE",
"device_version": "0.0.1"
},
+ "matrix_pins": {
+ "cols": ["F0", "F1", "E6", "C7", "C6", "B6", "D4", "B1", "B7", "B5", "B4", "D7", "D6", "B3", "F4"],
+ "rows": ["D0", "D1", "D2", "D3", "D5"]
+ },
+ "diode_direction": "COL2ROW",
"indicators": {
"caps_lock": "B0",
"on_state": 0
diff --git a/keyboards/crbn/config.h b/keyboards/crbn/config.h
index 840d8e7ca5..f7584af0bb 100644
--- a/keyboards/crbn/config.h
+++ b/keyboards/crbn/config.h
@@ -16,14 +16,6 @@
#pragma once
-
-/* key matrix pins */
-#define MATRIX_ROW_PINS { B3, B1, F7, F6 }
-#define MATRIX_COL_PINS { D3, D2, D1, D0, D4, C6, D7, E6, B4, B5, B6, B2 }
-
-/* COL2ROW or ROW2COL */
-#define DIODE_DIRECTION COL2ROW
-
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
#define LOCKING_SUPPORT_ENABLE
diff --git a/keyboards/crbn/info.json b/keyboards/crbn/info.json
index 5eeedab700..63d2d92a67 100644
--- a/keyboards/crbn/info.json
+++ b/keyboards/crbn/info.json
@@ -8,6 +8,11 @@
"pid": "0x0002",
"device_version": "0.0.1"
},
+ "matrix_pins": {
+ "cols": ["D3", "D2", "D1", "D0", "D4", "C6", "D7", "E6", "B4", "B5", "B6", "B2"],
+ "rows": ["B3", "B1", "F7", "F6"]
+ },
+ "diode_direction": "COL2ROW",
"encoder": {
"rotary": [
{"pin_a": "F5", "pin_b": "F4", "resolution": 2}
diff --git a/keyboards/creatkeebs/glacier/config.h b/keyboards/creatkeebs/glacier/config.h
index 68655d9d8f..76fcf3fa59 100644
--- a/keyboards/creatkeebs/glacier/config.h
+++ b/keyboards/creatkeebs/glacier/config.h
@@ -16,14 +16,6 @@
#pragma once
-
-/* key matrix pins */
-#define MATRIX_ROW_PINS { F0, F1, F4, E6, F5, D0 }
-#define MATRIX_COL_PINS { D4, D6, D7, B4, B5, F6, B0, B6, C6, C7, B1, B2, B3, B7, D3, D2, D1 }
-
-/* COL2ROW or ROW2COL */
-#define DIODE_DIRECTION COL2ROW
-
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
#define LOCKING_SUPPORT_ENABLE
diff --git a/keyboards/creatkeebs/glacier/info.json b/keyboards/creatkeebs/glacier/info.json
index 227adcbea2..3e306346f8 100644
--- a/keyboards/creatkeebs/glacier/info.json
+++ b/keyboards/creatkeebs/glacier/info.json
@@ -8,6 +8,11 @@
"pid": "0x6060",
"device_version": "0.0.1"
},
+ "matrix_pins": {
+ "cols": ["D4", "D6", "D7", "B4", "B5", "F6", "B0", "B6", "C6", "C7", "B1", "B2", "B3", "B7", "D3", "D2", "D1"],
+ "rows": ["F0", "F1", "F4", "E6", "F5", "D0"]
+ },
+ "diode_direction": "COL2ROW",
"processor": "atmega32u4",
"bootloader": "atmel-dfu",
"layout_aliases": {
diff --git a/keyboards/creatkeebs/thera/config.h b/keyboards/creatkeebs/thera/config.h
index 3a17d73f17..72e4f39e53 100644
--- a/keyboards/creatkeebs/thera/config.h
+++ b/keyboards/creatkeebs/thera/config.h
@@ -16,14 +16,6 @@
#pragma once
-
-/* key matrix pins */
-#define MATRIX_ROW_PINS { B2, B1, B0, E6, B3, B7 }
-#define MATRIX_COL_PINS { D0, D1, D2, D3, D4, D6, D7, B4, B5, B6, C6, C7, F7, F6, F5 }
-
-/* COL2ROW or ROW2COL */
-#define DIODE_DIRECTION COL2ROW
-
#ifdef RGB_DI_PIN
#define RGBLIGHT_EFFECT_BREATHING
#define RGBLIGHT_EFFECT_RAINBOW_MOOD
diff --git a/keyboards/creatkeebs/thera/info.json b/keyboards/creatkeebs/thera/info.json
index d30721658f..5124ba95d6 100644
--- a/keyboards/creatkeebs/thera/info.json
+++ b/keyboards/creatkeebs/thera/info.json
@@ -8,6 +8,11 @@
"pid": "0x6061",
"device_version": "0.0.1"
},
+ "matrix_pins": {
+ "cols": ["D0", "D1", "D2", "D3", "D4", "D6", "D7", "B4", "B5", "B6", "C6", "C7", "F7", "F6", "F5"],
+ "rows": ["B2", "B1", "B0", "E6", "B3", "B7"]
+ },
+ "diode_direction": "COL2ROW",
"processor": "atmega32u4",
"bootloader": "atmel-dfu",
"layout_aliases": {
diff --git a/keyboards/crimsonkeyboards/resume1800/config.h b/keyboards/crimsonkeyboards/resume1800/config.h
index 35b0326ec6..7c66ab16c6 100644
--- a/keyboards/crimsonkeyboards/resume1800/config.h
+++ b/keyboards/crimsonkeyboards/resume1800/config.h
@@ -16,24 +16,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
#pragma once
-
-/*
- * Keyboard Matrix Assignments
- *
- * Change this to how you wired your keyboard
- * COLS: AVR pins used for columns, left to right
- * ROWS: AVR pins used for rows, top to bottom
- * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
- * ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
- *
- */
-
-#define MATRIX_ROW_PINS { A5, A0, A1, B1, B2, B0 }
-#define MATRIX_COL_PINS { A2, B3, A3, B4, A4, D1, D5, D6, A6, A7, C7, C6, C5, C4, D7, C3, C2, C1, C0, D0 }
-
-/* COL2ROW, ROW2COL*/
-#define DIODE_DIRECTION COL2ROW
-
#define USB_MAX_POWER_CONSUMPTION 100
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
diff --git a/keyboards/crimsonkeyboards/resume1800/info.json b/keyboards/crimsonkeyboards/resume1800/info.json
index dbb1fa2ed9..4a259cbd93 100644
--- a/keyboards/crimsonkeyboards/resume1800/info.json
+++ b/keyboards/crimsonkeyboards/resume1800/info.json
@@ -8,6 +8,11 @@
"pid": "0xC18B",
"device_version": "0.0.1"
},
+ "matrix_pins": {
+ "cols": ["A2", "B3", "A3", "B4", "A4", "D1", "D5", "D6", "A6", "A7", "C7", "C6", "C5", "C4", "D7", "C3", "C2", "C1", "C0", "D0"],
+ "rows": ["A5", "A0", "A1", "B1", "B2", "B0"]
+ },
+ "diode_direction": "COL2ROW",
"indicators": {
"caps_lock": "B6",
"num_lock": "B5"
diff --git a/keyboards/crin/config.h b/keyboards/crin/config.h
index 880213cc11..3fe5a40329 100644
--- a/keyboards/crin/config.h
+++ b/keyboards/crin/config.h
@@ -17,9 +17,5 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
#pragma once
-#define MATRIX_COL_PINS { B11, B10, B2, B1, B0, A7, A6, A5, A4, A3, B9, B8, B7, B6, B5, B4, B3 }
-#define MATRIX_ROW_PINS { A9, A8, B15, B14, B13 }
-#define DIODE_DIRECTION COL2ROW
-
#define LOCKING_SUPPORT_ENABLE
#define LOCKING_RESYNC_ENABLE
diff --git a/keyboards/crin/info.json b/keyboards/crin/info.json
index 748e64c437..1e0bc9b38b 100644
--- a/keyboards/crin/info.json
+++ b/keyboards/crin/info.json
@@ -8,6 +8,11 @@
"pid": "0xCC11",
"device_version": "0.0.1"
},
+ "matrix_pins": {
+ "cols": ["B11", "B10", "B2", "B1", "B0", "A7", "A6", "A5", "A4", "A3", "B9", "B8", "B7", "B6", "B5", "B4", "B3"],
+ "rows": ["A9", "A8", "B15", "B14", "B13"]
+ },
+ "diode_direction": "COL2ROW",
"processor": "STM32F303",
"bootloader": "stm32-dfu",
"layout_aliases": {
diff --git a/keyboards/crkbd/config.h b/keyboards/crkbd/config.h
deleted file mode 100644
index 709cf4acb0..0000000000
--- a/keyboards/crkbd/config.h
+++ /dev/null
@@ -1,44 +0,0 @@
-/*
-Copyright 2019 @foostan
-Copyright 2020 Drashna Jaelre <@drashna>
-
-This program is free software: you can redistribute it and/or modify
-it under the terms of the GNU General Public License as published by
-the Free Software Foundation, either version 2 of the License, or
-(at your option) any later version.
-
-This program is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-GNU General Public License for more details.
-
-You should have received a copy of the GNU General Public License
-along with this program. If not, see <http://www.gnu.org/licenses/>.
-*/
-
-#pragma once
-
-
-#define MATRIX_ROW_PINS \
- { D4, C6, D7, E6 }
-
-// wiring of each half
-#define MATRIX_COL_PINS \
- { F4, F5, F6, F7, B1, B3 }
-// #define MATRIX_COL_PINS { B2, B3, B1, F7, F6, F5, F4 } //uncomment this line and comment line above if you need to reverse left-to-right key order
-
-/*
- * Feature disable options
- * These options are also useful to firmware size reduction.
- */
-
-/* disable debug print */
-// #define NO_DEBUG
-
-/* disable print */
-// #define NO_PRINT
-
-/* disable action features */
-//#define NO_ACTION_LAYER
-//#define NO_ACTION_TAPPING
-//#define NO_ACTION_ONESHOT
diff --git a/keyboards/crkbd/info.json b/keyboards/crkbd/info.json
index 778b33c565..9f1b12ca25 100644
--- a/keyboards/crkbd/info.json
+++ b/keyboards/crkbd/info.json
@@ -8,6 +8,11 @@
"pid": "0x0001",
"device_version": "0.0.1"
},
+ "matrix_pins": {
+ "cols": ["F4", "F5", "F6", "F7", "B1", "B3"],
+ "rows": ["D4", "C6", "D7", "E6"]
+ },
+ "diode_direction": "COL2ROW",
"processor": "atmega32u4",
"community_layouts": ["split_3x5_3", "split_3x6_3"],
"layouts": {
diff --git a/keyboards/crkbd/r2g/config.h b/keyboards/crkbd/r2g/config.h
index 2219e0d228..06dc572be1 100644
--- a/keyboards/crkbd/r2g/config.h
+++ b/keyboards/crkbd/r2g/config.h
@@ -69,7 +69,5 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
# define ENABLE_RGB_MATRIX_SOLID_SPLASH
#endif
-#define DIODE_DIRECTION COL2ROW
-
#define SPLIT_USB_DETECT
diff --git a/keyboards/crkbd/rev1/config.h b/keyboards/crkbd/rev1/config.h
index 1614ebc53b..854a63a35d 100644
--- a/keyboards/crkbd/rev1/config.h
+++ b/keyboards/crkbd/rev1/config.h
@@ -35,5 +35,3 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
{ 27, 27 }
# define SPLIT_TRANSPORT_MIRROR
#endif
-
-#define DIODE_DIRECTION COL2ROW
diff --git a/keyboards/custommk/genesis/rev1/config.h b/keyboards/custommk/genesis/rev1/config.h
index c5e7661c65..f739f1abfb 100644
--- a/keyboards/custommk/genesis/rev1/config.h
+++ b/keyboards/custommk/genesis/rev1/config.h
@@ -16,14 +16,6 @@
#pragma once
-
-/* key matrix pins */
-#define MATRIX_ROW_PINS { F0, C7, C6, B6, B5 }
-#define MATRIX_COL_PINS { F4, F5, D7, B4 }
-
-/* COL2ROW or ROW2COL */
-#define DIODE_DIRECTION COL2ROW
-
#define TAP_CODE_DELAY 10
#define RGB_DI_PIN E6
diff --git a/keyboards/custommk/genesis/rev1/info.json b/keyboards/custommk/genesis/rev1/info.json
index aaab705432..d957e4c604 100644
--- a/keyboards/custommk/genesis/rev1/info.json
+++ b/keyboards/custommk/genesis/rev1/info.json
@@ -8,6 +8,11 @@
"pid": "0xFAB0",
"device_version": "0.0.1"
},
+ "matrix_pins": {
+ "cols": ["F4", "F5", "D7", "B4"],
+ "rows": ["F0", "C7", "C6", "B6", "B5"]
+ },
+ "diode_direction": "COL2ROW",
"encoder": {
"rotary": [
{"pin_a": "F6", "pin_b": "F7", "resolution": 2},
diff --git a/keyboards/custommk/genesis/rev2/config.h b/keyboards/custommk/genesis/rev2/config.h
index f152f723fe..00b9711420 100644
--- a/keyboards/custommk/genesis/rev2/config.h
+++ b/keyboards/custommk/genesis/rev2/config.h
@@ -16,14 +16,6 @@
#pragma once
-
-/* key matrix pins */
-#define MATRIX_ROW_PINS { F0, C7, C6, B6, B5, B0}
-#define MATRIX_COL_PINS { F4, F5, D7, B4 }
-
-/* COL2ROW or ROW2COL */
-#define DIODE_DIRECTION COL2ROW
-
#define TAP_CODE_DELAY 10
#define RGB_DI_PIN E6
diff --git a/keyboards/custommk/genesis/rev2/info.json b/keyboards/custommk/genesis/rev2/info.json
index 45b83c512a..901376fb3b 100644
--- a/keyboards/custommk/genesis/rev2/info.json
+++ b/keyboards/custommk/genesis/rev2/info.json
@@ -8,6 +8,11 @@
"pid": "0xFAB1",
"device_version": "0.0.1"
},
+ "matrix_pins": {
+ "cols": ["F4", "F5", "D7", "B4"],
+ "rows": ["F0", "C7", "C6", "B6", "B5", "B0"]
+ },
+ "diode_direction": "COL2ROW",
"encoder": {
"rotary": [
{"pin_a": "F6", "pin_b": "F7", "resolution": 2},
diff --git a/keyboards/cutie_club/borsdorf/config.h b/keyboards/cutie_club/borsdorf/config.h
index 655ac6ece1..c25df59397 100644
--- a/keyboards/cutie_club/borsdorf/config.h
+++ b/keyboards/cutie_club/borsdorf/config.h
@@ -17,16 +17,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
#pragma once
-
-/*
- * Keyboard Matrix Assignments
- */
-#define MATRIX_ROW_PINS { A15, A14, B12, B5, B4 }
-#define MATRIX_COL_PINS { B11, B10, B2, B1, B0, A7, A6, A5, A4, A3, A2, A1, A0, F1, F0 }
-
-/* COL2ROW, ROW2COL*/
-#define DIODE_DIRECTION COL2ROW
-
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
#define LOCKING_SUPPORT_ENABLE
/* Locking resynchronize hack */
diff --git a/keyboards/cutie_club/borsdorf/info.json b/keyboards/cutie_club/borsdorf/info.json
index c53dc5f9dd..3bd5ba0b09 100644
--- a/keyboards/cutie_club/borsdorf/info.json
+++ b/keyboards/cutie_club/borsdorf/info.json
@@ -8,6 +8,11 @@
"pid": "0x6D8A",
"device_version": "0.0.1"
},
+ "matrix_pins": {
+ "cols": ["B11", "B10", "B2", "B1", "B0", "A7", "A6", "A5", "A4", "A3", "A2", "A1", "A0", "F1", "F0"],
+ "rows": ["A15", "A14", "B12", "B5", "B4"]
+ },
+ "diode_direction": "COL2ROW",
"indicators": {
"caps_lock": "B13"
},
diff --git a/keyboards/cutie_club/giant_macro_pad/config.h b/keyboards/cutie_club/giant_macro_pad/config.h
index c78221d4c8..c5eb6384a3 100755
--- a/keyboards/cutie_club/giant_macro_pad/config.h
+++ b/keyboards/cutie_club/giant_macro_pad/config.h
@@ -16,16 +16,6 @@
#pragma once
-
-/*
- * Keyboard Matrix Assignments
- */
-#define MATRIX_ROW_PINS { C10, C11, C12, D2, B3, B4, B5, B6, B7, B8, A3, B2, B1, B0, C5, C4, A7, A6, A5, A4 }
-#define MATRIX_COL_PINS { C9, C8, C7, C6, B15, B14, B13, B12, A8, A15, B9, A2, A1, A0, C3, C2, C1, C0, F1, F0 }
-
-/* COL2ROW, ROW2COL*/
-#define DIODE_DIRECTION COL2ROW
-
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
#define LOCKING_SUPPORT_ENABLE
/* Locking resynchronize hack */
diff --git a/keyboards/cutie_club/giant_macro_pad/info.json b/keyboards/cutie_club/giant_macro_pad/info.json
index d68b8aa4d4..0ee63b2221 100644
--- a/keyboards/cutie_club/giant_macro_pad/info.json
+++ b/keyboards/cutie_club/giant_macro_pad/info.json
@@ -8,6 +8,11 @@
"pid": "0x74B6",
"device_version": "0.0.1"
},
+ "matrix_pins": {
+ "cols": ["C9", "C8", "C7", "C6", "B15", "B14", "B13", "B12", "A8", "A15", "B9", "A2", "A1", "A0", "C3", "C2", "C1", "C0", "F1", "F0"],
+ "rows": ["C10", "C11", "C12", "D2", "B3", "B4", "B5", "B6", "B7", "B8", "A3", "B2", "B1", "B0", "C5", "C4", "A7", "A6", "A5", "A4"]
+ },
+ "diode_direction": "COL2ROW",
"processor": "STM32F072",
"bootloader": "stm32-dfu",
"layout_aliases": {
diff --git a/keyboards/cutie_club/keebcats/denis/config.h b/keyboards/cutie_club/keebcats/denis/config.h
index 7e46d166b7..c5eb6384a3 100644
--- a/keyboards/cutie_club/keebcats/denis/config.h
+++ b/keyboards/cutie_club/keebcats/denis/config.h
@@ -16,16 +16,6 @@
#pragma once
-
-/*
- * Keyboard Matrix Assignments
- */
-#define MATRIX_ROW_PINS { B2, D0, F5, F4, F1 }
-#define MATRIX_COL_PINS { E6, F6, F7, C7, C6, B6, B5, B4, D7, D6, D4, D5, D3, D2, D1 }
-
-/* COL2ROW, ROW2COL*/
-#define DIODE_DIRECTION COL2ROW
-
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
#define LOCKING_SUPPORT_ENABLE
/* Locking resynchronize hack */
diff --git a/keyboards/cutie_club/keebcats/denis/info.json b/keyboards/cutie_club/keebcats/denis/info.json
index 0fe5fcf534..c4171df94d 100644
--- a/keyboards/cutie_club/keebcats/denis/info.json
+++ b/keyboards/cutie_club/keebcats/denis/info.json
@@ -8,6 +8,11 @@
"pid": "0xB260",
"device_version": "0.0.1"
},
+ "matrix_pins": {
+ "cols": ["E6", "F6", "F7", "C7", "C6", "B6", "B5", "B4", "D7", "D6", "D4", "D5", "D3", "D2", "D1"],
+ "rows": ["B2", "D0", "F5", "F4", "F1"]
+ },
+ "diode_direction": "COL2ROW",
"indicators": {
"caps_lock": "F0"
},
diff --git a/keyboards/cutie_club/keebcats/dougal/config.h b/keyboards/cutie_club/keebcats/dougal/config.h
index d2f4b19e87..c5eb6384a3 100644
--- a/keyboards/cutie_club/keebcats/dougal/config.h
+++ b/keyboards/cutie_club/keebcats/dougal/config.h
@@ -16,16 +16,6 @@
#pragma once
-
-/*
- * Keyboard Matrix Assignments
- */
-#define MATRIX_ROW_PINS { B2, D0, F5, F4, F1 }
-#define MATRIX_COL_PINS { E6, F6, F7, C7, C6, B6, B5, B4, D7, D6, D4, D5, D3, D2, D1, B7 }
-
-/* COL2ROW, ROW2COL*/
-#define DIODE_DIRECTION COL2ROW
-
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
#define LOCKING_SUPPORT_ENABLE
/* Locking resynchronize hack */
diff --git a/keyboards/cutie_club/keebcats/dougal/info.json b/keyboards/cutie_club/keebcats/dougal/info.json
index 7555611d89..5060e14677 100644
--- a/keyboards/cutie_club/keebcats/dougal/info.json
+++ b/keyboards/cutie_club/keebcats/dougal/info.json
@@ -8,6 +8,11 @@
"pid": "0xB265",
"device_version": "0.0.1"
},
+ "matrix_pins": {
+ "cols": ["E6", "F6", "F7", "C7", "C6", "B6", "B5", "B4", "D7", "D6", "D4", "D5", "D3", "D2", "D1", "B7"],
+ "rows": ["B2", "D0", "F5", "F4", "F1"]
+ },
+ "diode_direction": "COL2ROW",
"indicators": {
"caps_lock": "F0"
},
diff --git a/keyboards/cutie_club/novus/config.h b/keyboards/cutie_club/novus/config.h
index 001aeb5375..4c65b71f76 100644
--- a/keyboards/cutie_club/novus/config.h
+++ b/keyboards/cutie_club/novus/config.h
@@ -17,23 +17,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
#pragma once
-
-/*
- * Keyboard Matrix Assignments
- *
- * Change this to how you wired your keyboard
- * COLS: AVR pins used for columns, left to right
- * ROWS: AVR pins used for rows, top to bottom
- * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
- * ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
- *
- */
-#define MATRIX_ROW_PINS { F0, F1, F4, F5, F6 }
-#define MATRIX_COL_PINS { B6, C6, C7, B2, B3, D0, D1, D2, D3, D7, B4, B5, D5, D4, D6 }
-
-/* COL2ROW, ROW2COL */
-#define DIODE_DIRECTION COL2ROW
-
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
#define LOCKING_SUPPORT_ENABLE
/* Locking resynchronize hack */
diff --git a/keyboards/cutie_club/novus/info.json b/keyboards/cutie_club/novus/info.json
index 834021416a..e51a007def 100644
--- a/keyboards/cutie_club/novus/info.json
+++ b/keyboards/cutie_club/novus/info.json
@@ -8,6 +8,11 @@
"pid": "0x3F42",
"device_version": "0.0.1"
},
+ "matrix_pins": {
+ "cols": ["B6", "C6", "C7", "B2", "B3", "D0", "D1", "D2", "D3", "D7", "B4", "B5", "D5", "D4", "D6"],
+ "rows": ["F0", "F1", "F4", "F5", "F6"]
+ },
+ "diode_direction": "COL2ROW",
"processor": "atmega32u4",
"bootloader": "atmel-dfu",
"layout_aliases": {
diff --git a/keyboards/cutie_club/wraith/config.h b/keyboards/cutie_club/wraith/config.h
index e7a7104856..46a265902c 100644
--- a/keyboards/cutie_club/wraith/config.h
+++ b/keyboards/cutie_club/wraith/config.h
@@ -17,23 +17,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
#pragma once
-
-/*
- * Keyboard Matrix Assignments
- *
- * Change this to how you wired your keyboard
- * COLS: AVR pins used for columns, left to right
- * ROWS: AVR pins used for rows, top to bottom
- * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
- * ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
- *
-*/
-#define MATRIX_ROW_PINS { B6, B5, B4, D7, D6, D4, D5, D3, D2, D1, D0, B7 }
-#define MATRIX_COL_PINS { C6, C7, F7, F6, F5, F4, F1, F0 }
-
-/* COL2ROW, ROW2COL*/
-#define DIODE_DIRECTION COL2ROW
-
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
#define LOCKING_SUPPORT_ENABLE
/* Locking resynchronize hack */
diff --git a/keyboards/cutie_club/wraith/info.json b/keyboards/cutie_club/wraith/info.json
index 4c27785468..f18b39837e 100644
--- a/keyboards/cutie_club/wraith/info.json
+++ b/keyboards/cutie_club/wraith/info.json
@@ -8,6 +8,11 @@
"pid": "0x0000",
"device_version": "0.0.1"
},
+ "matrix_pins": {
+ "cols": ["C6", "C7", "F7", "F6", "F5", "F4", "F1", "F0"],
+ "rows": ["B6", "B5", "B4", "D7", "D6", "D4", "D5", "D3", "D2", "D1", "D0", "B7"]
+ },
+ "diode_direction": "COL2ROW",
"indicators": {
"caps_lock": "B3",
"on_state": 0
diff --git a/keyboards/cx60/config.h b/keyboards/cx60/config.h
index 5b9aea0a99..56f7ce0fdd 100644
--- a/keyboards/cx60/config.h
+++ b/keyboards/cx60/config.h
@@ -16,14 +16,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
#pragma once
-
-/* Keyboard Matrix Assignments */
-#define MATRIX_ROW_PINS { F1, F4, F5, F6, E6 }
-#define MATRIX_COL_PINS { C7, C6, F7, F0, B4, D7, D6, B0, B1, B2, B3, D2, D3, D5 }
-
-/* COL2ROW or ROW2COL */
-#define DIODE_DIRECTION COL2ROW
-
/* RGB Underglow */
#define RGB_DI_PIN B6
#define RGBLIGHT_EFFECT_BREATHING
diff --git a/keyboards/cx60/info.json b/keyboards/cx60/info.json
index c859379563..1220b32c8a 100644
--- a/keyboards/cx60/info.json
+++ b/keyboards/cx60/info.json
@@ -8,6 +8,11 @@
"pid": "0x3630",
"device_version": "0.0.1"
},
+ "matrix_pins": {
+ "cols": ["C7", "C6", "F7", "F0", "B4", "D7", "D6", "B0", "B1", "B2", "B3", "D2", "D3", "D5"],
+ "rows": ["F1", "F4", "F5", "F6", "E6"]
+ },
+ "diode_direction": "COL2ROW",
"backlight": {
"pin": "B7",
"levels": 5
diff --git a/keyboards/handwired/108key_trackpoint/config.h b/keyboards/handwired/108key_trackpoint/config.h
index 5887401a3a..8aca85bf26 100644
--- a/keyboards/handwired/108key_trackpoint/config.h
+++ b/keyboards/handwired/108key_trackpoint/config.h
@@ -37,11 +37,5 @@
#define PS2_USART_RX_VECT USART1_RX_vect
#endif
-#define MATRIX_ROW_PINS { B0, B1, B2, B3, B4, B5, B6, B7 }
-#define MATRIX_COL_PINS { C0, C1, C2, C3, C4, C5, C6, C7, D0, D1, F0, D3, D4, F1, D6, D7, E0, E1, E2, E3, E4, E5, E6 }
-
-/* COL2ROW or ROW2COL */
-#define DIODE_DIRECTION COL2ROW
-
#define LOCKING_SUPPORT_ENABLE
#define LOCKING_RESYNC_ENABLE
diff --git a/keyboards/handwired/108key_trackpoint/info.json b/keyboards/handwired/108key_trackpoint/info.json
index 54233290e5..e771c4b8aa 100644
--- a/keyboards/handwired/108key_trackpoint/info.json
+++ b/keyboards/handwired/108key_trackpoint/info.json
@@ -8,6 +8,11 @@
"pid": "0x5678",
"device_version": "0.0.1"
},
+ "matrix_pins": {
+ "cols": ["C0", "C1", "C2", "C3", "C4", "C5", "C6", "C7", "D0", "D1", "F0", "D3", "D4", "F1", "D6", "D7", "E0", "E1", "E2", "E3", "E4", "E5", "E6"],
+ "rows": ["B0", "B1", "B2", "B3", "B4", "B5", "B6", "B7"]
+ },
+ "diode_direction": "COL2ROW",
"processor": "at90usb1286",
"bootloader": "halfkay",
"layouts": {
diff --git a/keyboards/handwired/2x5keypad/config.h b/keyboards/handwired/2x5keypad/config.h
index 10e2265749..4b1dc39862 100644
--- a/keyboards/handwired/2x5keypad/config.h
+++ b/keyboards/handwired/2x5keypad/config.h
@@ -1,13 +1,5 @@
#pragma once
-
-/* key matrix pins */
-#define MATRIX_ROW_PINS { B3, B2 }
-#define MATRIX_COL_PINS { D4, C6, D7, E6, B4 }
-
-/* COL2ROW or ROW2COL */
-#define DIODE_DIRECTION COL2ROW
-
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
#define LOCKING_SUPPORT_ENABLE
diff --git a/keyboards/handwired/2x5keypad/info.json b/keyboards/handwired/2x5keypad/info.json
index 7267d48672..3679eca918 100644
--- a/keyboards/handwired/2x5keypad/info.json
+++ b/keyboards/handwired/2x5keypad/info.json
@@ -8,6 +8,11 @@
"pid": "0x2020",
"device_version": "0.0.1"
},
+ "matrix_pins": {
+ "cols": ["D4", "C6", "D7", "E6", "B4"],
+ "rows": ["B3", "B2"]
+ },
+ "diode_direction": "COL2ROW",
"processor": "atmega32u4",
"bootloader": "caterina",
"layouts": {
diff --git a/keyboards/handwired/3dfoxc/config.h b/keyboards/handwired/3dfoxc/config.h
deleted file mode 100644
index 9f08703b6d..0000000000
--- a/keyboards/handwired/3dfoxc/config.h
+++ /dev/null
@@ -1,33 +0,0 @@
-/* Copyright 2022 david l goodrich <dlg@dsrw.org>
- *
- * This program is free software: you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation, either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program. If not, see <http://www.gnu.org/licenses/>.
- */
-
-#pragma once
-
-
-/*
- * Keyboard Matrix Assignments
- *
- * Change this to how you wired your keyboard
- * COLS: AVR pins used for columns, left to right
- * ROWS: AVR pins used for rows, top to bottom
- * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
- * ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
- *
- */
-#define MATRIX_ROW_PINS { F0, F1, C7, D5, B7 }
-#define MATRIX_COL_PINS { D1, D0, D4, C6, D7, E6, B4, B5, B6, B2, B3, B1, F7, F6, F5, F4 }
-
-#define DIODE_DIRECTION COL2ROW
diff --git a/keyboards/handwired/3dfoxc/info.json b/keyboards/handwired/3dfoxc/info.json
index dfd4e8d4f0..bafce6ccbf 100644
--- a/keyboards/handwired/3dfoxc/info.json
+++ b/keyboards/handwired/3dfoxc/info.json
@@ -8,6 +8,11 @@
"pid": "0x0000",
"device_version": "0.0.1"
},
+ "matrix_pins": {
+ "cols": ["D1", "D0", "D4", "C6", "D7", "E6", "B4", "B5", "B6", "B2", "B3", "B1", "F7", "F6", "F5", "F4"],
+ "rows": ["F0", "F1", "C7", "D5", "B7"]
+ },
+ "diode_direction": "COL2ROW",
"processor": "atmega32u4",
"bootloader": "atmel-dfu",
"layouts": {
diff --git a/keyboards/handwired/3dp660/config.h b/keyboards/handwired/3dp660/config.h
index c2effa2e46..f804456960 100644
--- a/keyboards/handwired/3dp660/config.h
+++ b/keyboards/handwired/3dp660/config.h
@@ -20,14 +20,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
#define TAPPING_TERM 400
-// ROWS: Top to bottom, COLS: Left to right
-
-#define MATRIX_ROW_PINS { B0, B1, B2, B3, B7 }
-#define MATRIX_COL_PINS { D2, D3, C6, C7, D5, D4, D7, B4, B5, B6, F7, F6, F5, F4, F1 }
-
-/* COL2ROW or ROW2COL */
-#define DIODE_DIRECTION COL2ROW
-
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
#define LOCKING_SUPPORT_ENABLE
/* Locking resynchronize hack */
diff --git a/keyboards/handwired/3dp660/info.json b/keyboards/handwired/3dp660/info.json
index bfe19819fe..dd04753084 100644
--- a/keyboards/handwired/3dp660/info.json
+++ b/keyboards/handwired/3dp660/info.json
@@ -8,6 +8,11 @@
"pid": "0x3660",
"device_version": "0.0.1"
},
+ "matrix_pins": {
+ "cols": ["D2", "D3", "C6", "C7", "D5", "D4", "D7", "B4", "B5", "B6", "F7", "F6", "F5", "F4", "F1"],
+ "rows": ["B0", "B1", "B2", "B3", "B7"]
+ },
+ "diode_direction": "COL2ROW",
"processor": "atmega32u4",
"bootloader": "halfkay",
"layouts": {
diff --git a/keyboards/handwired/412_64/config.h b/keyboards/handwired/412_64/config.h
index 5037639719..7caa265c1a 100644
--- a/keyboards/handwired/412_64/config.h
+++ b/keyboards/handwired/412_64/config.h
@@ -2,23 +2,6 @@
#pragma once
-
-/*
- * Keyboard Matrix Assignments
- *
- * Change this to how you wired your keyboard
- * COLS: AVR pins used for columns, left to right
- * ROWS: AVR pins used for rows, top to bottom
- * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
- * ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
- *
-*/
-#define MATRIX_ROW_PINS { D3, F4, F5, F6, F7, B1, B3, B2 }
-#define MATRIX_COL_PINS { B0, D2, D0, D1, D4, C6, D7, E6 }
-
-/* COL2ROW, ROW2COL*/
-#define DIODE_DIRECTION COL2ROW
-
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
#define LOCKING_SUPPORT_ENABLE
/* Locking resynchronize hack */
diff --git a/keyboards/handwired/412_64/info.json b/keyboards/handwired/412_64/info.json
index 2e8ead2950..e8e7ab9241 100644
--- a/keyboards/handwired/412_64/info.json
+++ b/keyboards/handwired/412_64/info.json
@@ -8,6 +8,11 @@
"pid": "0x0412",
"device_version": "0.0.1"
},
+ "matrix_pins": {
+ "cols": ["B0", "D2", "D0", "D1", "D4", "C6", "D7", "E6"],
+ "rows": ["D3", "F4", "F5", "F6", "F7", "B1", "B3", "B2"]
+ },
+ "diode_direction": "COL2ROW",
"processor": "atmega32u4",
"bootloader": "atmel-dfu",
"layouts": {
diff --git a/keyboards/handwired/42/config.h b/keyboards/handwired/42/config.h
index 9341a90a76..57a8664649 100644
--- a/keyboards/handwired/42/config.h
+++ b/keyboards/handwired/42/config.h
@@ -1,22 +1,5 @@
#pragma once
-
-/*
- * Keyboard Matrix Assignments
- *
- * Change this to how you wired your keyboard
- * COLS: AVR pins used for columns, left to right
- * ROWS: AVR pins used for rows, top to bottom
- * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
- * ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
- *
-*/
-#define MATRIX_COL_PINS { F5, F6, F7, F0, F1, F4, B6, B5, D7, C7, D6, B7 }
-#define MATRIX_ROW_PINS { D2, D3, D0, D1 }
-
-/* COL2ROW, ROW2COL */
-#define DIODE_DIRECTION COL2ROW
-
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
#define LOCKING_SUPPORT_ENABLE
/* Locking resynchronize hack */
diff --git a/keyboards/handwired/42/info.json b/keyboards/handwired/42/info.json
index 16d3af1667..f887edea52 100644
--- a/keyboards/handwired/42/info.json
+++ b/keyboards/handwired/42/info.json
@@ -8,6 +8,11 @@
"pid": "0x0000",
"device_version": "0.0.3"
},
+ "matrix_pins": {
+ "cols": ["F5", "F6", "F7", "F0", "F1", "F4", "B6", "B5", "D7", "C7", "D6", "B7"],
+ "rows": ["D2", "D3", "D0", "D1"]
+ },
+ "diode_direction": "COL2ROW",
"processor": "atmega32u4",
"bootloader": "caterina",
"layouts": {
diff --git a/keyboards/handwired/6key/config.h b/keyboards/handwired/6key/config.h
index 31b6c8888d..0ba89040c7 100644
--- a/keyboards/handwired/6key/config.h
+++ b/keyboards/handwired/6key/config.h
@@ -16,13 +16,5 @@
#pragma once
-
-/* pin-out */
-#define MATRIX_ROW_PINS { B4, D0 }
-#define MATRIX_COL_PINS { D3, D2, D1 }
-
/* dip switch */
#define DIP_SWITCH_PINS { C6 }
-
-/* COL2ROW or ROW2COL */
-#define DIODE_DIRECTION COL2ROW
diff --git a/keyboards/handwired/6key/info.json b/keyboards/handwired/6key/info.json
index 7d7e17b64c..fec35620a2 100644
--- a/keyboards/handwired/6key/info.json
+++ b/keyboards/handwired/6key/info.json
@@ -8,6 +8,11 @@
"pid": "0x0007",
"device_version": "0.0.1"
},
+ "matrix_pins": {
+ "cols": ["D3", "D2", "D1"],
+ "rows": ["B4", "D0"]
+ },
+ "diode_direction": "COL2ROW",
"processor": "atmega32u4",
"bootloader": "caterina",
"layouts": {
diff --git a/keyboards/handwired/6macro/config.h b/keyboards/handwired/6macro/config.h
index 0dc61becd3..e93fe5511f 100644
--- a/keyboards/handwired/6macro/config.h
+++ b/keyboards/handwired/6macro/config.h
@@ -17,14 +17,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
#pragma once
-
-/* pinout - DON'T CHANGE */
-#define MATRIX_ROW_PINS { B3, B4 }
-#define MATRIX_COL_PINS { B0, B1, B2 }
-
-/* COL2ROW, ROW2COL*/
-#define DIODE_DIRECTION COL2ROW
-
#define RGB_DI_PIN D2
#define RGBLED_NUM 10
#define RGB_MATRIX_LED_COUNT RGBLED_NUM
diff --git a/keyboards/handwired/6macro/info.json b/keyboards/handwired/6macro/info.json
index 1d1aac48ad..d081a75d3e 100644
--- a/keyboards/handwired/6macro/info.json
+++ b/keyboards/handwired/6macro/info.json
@@ -8,6 +8,11 @@
"pid": "0x0037",
"device_version": "0.0.1"
},
+ "matrix_pins": {
+ "cols": ["B0", "B1", "B2"],
+ "rows": ["B3", "B4"]
+ },
+ "diode_direction": "COL2ROW",
"processor": "atmega32u2",
"bootloader": "atmel-dfu",
"layouts": {
diff --git a/keyboards/handwired/aek64/config.h b/keyboards/handwired/aek64/config.h
index e847297296..6291115158 100644
--- a/keyboards/handwired/aek64/config.h
+++ b/keyboards/handwired/aek64/config.h
@@ -17,13 +17,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
#pragma once
-
-// Originally made for a Teensy 2++
-#define MATRIX_COL_PINS { F0, E6, E7, B0, B1, B2, B3, B4, B5, B6, D3, D0, D1, D2 }
-#define MATRIX_ROW_PINS { E0, E1, C0, C1, C2 }
-
-#define DIODE_DIRECTION COL2ROW
-
/* Enable the space-cadet options */
#define RSPC_KEYS KC_RSFT, KC_TRNS, KC_PGUP
#define RCPC_KEYS KC_RCTL, KC_TRNS, KC_PGDN
diff --git a/keyboards/handwired/aek64/info.json b/keyboards/handwired/aek64/info.json
index 471208ca41..4c71a69358 100644
--- a/keyboards/handwired/aek64/info.json
+++ b/keyboards/handwired/aek64/info.json
@@ -8,6 +8,11 @@
"pid": "0x6464",
"device_version": "0.0.1"
},
+ "matrix_pins": {
+ "cols": ["F0", "E6", "E7", "B0", "B1", "B2", "B3", "B4", "B5", "B6", "D3", "D0", "D1", "D2"],
+ "rows": ["E0", "E1", "C0", "C1", "C2"]
+ },
+ "diode_direction": "COL2ROW",
"backlight": {
"pin": "B7",
"levels": 5,
diff --git a/keyboards/handwired/aim65/config.h b/keyboards/handwired/aim65/config.h
deleted file mode 100644
index 84e51951a9..0000000000
--- a/keyboards/handwired/aim65/config.h
+++ /dev/null
@@ -1,33 +0,0 @@
-/* Copyright 2021 Matteo Bonora
- *
- * This program is free software: you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation, either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program. If not, see <http://www.gnu.org/licenses/>.
- */
-
-#pragma once
-
-
-/*
- * Keyboard Matrix Assignments
- *
- * Change this to how you wired your keyboard
- * COLS: AVR pins used for columns, left to right
- * ROWS: AVR pins used for rows, top to bottom
- * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
- * ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
- *
- */
-#define MATRIX_ROW_PINS { D0, D4, D7, E6, B4, B5, B3, B1 }
-#define MATRIX_COL_PINS { D1, C6, B6, B2, F7, F6, F5, F4 }
-
-#define DIODE_DIRECTION COL2ROW
diff --git a/keyboards/handwired/aim65/info.json b/keyboards/handwired/aim65/info.json
index de4263d1cd..9439a11c76 100644
--- a/keyboards/handwired/aim65/info.json
+++ b/keyboards/handwired/aim65/info.json
@@ -8,6 +8,11 @@
"pid": "0x0F34",
"device_version": "0.0.1"
},
+ "matrix_pins": {
+ "cols": ["D1", "C6", "B6", "B2", "F7", "F6", "F5", "F4"],
+ "rows": ["D0", "D4", "D7", "E6", "B4", "B5", "B3", "B1"]
+ },
+ "diode_direction": "COL2ROW",
"indicators": {
"caps_lock": "B0",
"on_state": 0
diff --git a/keyboards/handwired/amigopunk/config.h b/keyboards/handwired/amigopunk/config.h
index 2cbbb3152a..bcdca4920c 100644
--- a/keyboards/handwired/amigopunk/config.h
+++ b/keyboards/handwired/amigopunk/config.h
@@ -16,14 +16,6 @@
#pragma once
-
-/* Key matrix pins */
-#define MATRIX_ROW_PINS { C0, C1, C2, C3, C4, C5 }
-#define MATRIX_COL_PINS { B6, B5, B4, B3, B2, B1, B0, E7, E6, F0, F1, F2, F3, F4, F5, F6, F7 }
-
-/* COL2ROW or ROW2COL */
-#define DIODE_DIRECTION COL2ROW
-
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
#define LOCKING_SUPPORT_ENABLE
diff --git a/keyboards/handwired/amigopunk/info.json b/keyboards/handwired/amigopunk/info.json
index e79911a676..eb0d9d7fb2 100644
--- a/keyboards/handwired/amigopunk/info.json
+++ b/keyboards/handwired/amigopunk/info.json
@@ -8,6 +8,11 @@
"pid": "0x1805",
"device_version": "0.0.1"
},
+ "matrix_pins": {
+ "cols": ["B6", "B5", "B4", "B3", "B2", "B1", "B0", "E7", "E6", "F0", "F1", "F2", "F3", "F4", "F5", "F6", "F7"],
+ "rows": ["C0", "C1", "C2", "C3", "C4", "C5"]
+ },
+ "diode_direction": "COL2ROW",
"encoder": {
"rotary": [
{"pin_a": "E0", "pin_b": "E1"}
diff --git a/keyboards/handwired/angel/config.h b/keyboards/handwired/angel/config.h
index a138c0c2d1..b7e08c2b24 100644
--- a/keyboards/handwired/angel/config.h
+++ b/keyboards/handwired/angel/config.h
@@ -17,17 +17,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
#pragma once
-/*
- * Keyboard Matrix Assignments
- * COLS: AVR pins used for columns, left to right
- * ROWS: AVR pins used for rows, top to bottom
- * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
- * ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
- */
-#define MATRIX_ROW_PINS { B6, B2, B5, B4 }
-#define MATRIX_COL_PINS { D3, D2, D1, D0, D4, C6, D7, E6, B3, B1, F7, F6, F5 }
-#define DIODE_DIRECTION COL2ROW
-
// https://docs.qmk.fm/using-qmk/software-features/tap_hold
#define TAPPING_TERM 200
#define IGNORE_MOD_TAP_INTERRUPT
diff --git a/keyboards/handwired/angel/info.json b/keyboards/handwired/angel/info.json
index 004d30d93a..3bf7d83178 100644
--- a/keyboards/handwired/angel/info.json
+++ b/keyboards/handwired/angel/info.json
@@ -8,6 +8,11 @@
"pid": "0x0805",
"device_version": "1.0.0"
},
+ "matrix_pins": {
+ "cols": ["D3", "D2", "D1", "D0", "D4", "C6", "D7", "E6", "B3", "B1", "F7", "F6", "F5"],
+ "rows": ["B6", "B2", "B5", "B4"]
+ },
+ "diode_direction": "COL2ROW",
"processor": "atmega32u4",
"bootloader": "caterina",
"layouts": {
diff --git a/keyboards/handwired/aplx2/config.h b/keyboards/handwired/aplx2/config.h
deleted file mode 100644
index c140e5bced..0000000000
--- a/keyboards/handwired/aplx2/config.h
+++ /dev/null
@@ -1,27 +0,0 @@
-/*
-Copyright 2020 April Aplyard <alex.fragiou@gmail.com>
-
-This program is free software: you can redistribute it and/or modify
-it under the terms of the GNU General Public License as published by
-the Free Software Foundation, either version 2 of the License, or
-(at your option) any later version.
-
-This program is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-GNU General Public License for more details.
-
-You should have received a copy of the GNU General Public License
-along with this program. If not, see <http://www.gnu.org/licenses/>.
-*/
-
-#pragma once
-
-
-/* pin-out */
-#define MATRIX_ROW_PINS { D1 }
-#define MATRIX_COL_PINS { B5, D3 }
-
-/* COL2ROW or ROW2COL */
-#define DIODE_DIRECTION COL2ROW
-
diff --git a/keyboards/handwired/aplx2/info.json b/keyboards/handwired/aplx2/info.json
index dc1dd86e63..76aff146f2 100644
--- a/keyboards/handwired/aplx2/info.json
+++ b/keyboards/handwired/aplx2/info.json
@@ -8,6 +8,11 @@
"pid": "0x0030",
"device_version": "0.0.1"
},
+ "matrix_pins": {
+ "cols": ["B5", "D3"],
+ "rows": ["D1"]
+ },
+ "diode_direction": "COL2ROW",
"processor": "atmega32u4",
"bootloader": "caterina",
"layouts": {
diff --git a/keyboards/handwired/aranck/config.h b/keyboards/handwired/aranck/config.h
index 024ad37c13..6f44c0cbba 100644
--- a/keyboards/handwired/aranck/config.h
+++ b/keyboards/handwired/aranck/config.h
@@ -17,25 +17,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
#pragma once
-
-/*
- * Keyboard Matrix Assignments
- *
- * Change this to how you wired your keyboard
- * COLS: AVR pins used for columns, left to right
- * ROWS: AVR pins used for rows, top to bottom
- * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
- * ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
- *
- */
-#define MATRIX_ROW_PINS \
- { D3, D2, D1, D0 }
-#define MATRIX_COL_PINS \
- { C6, D7, E6, B4, B6, B2, B3, B1, F7, F6, F5, F4 }
-
-/* COL2ROW, ROW2COL*/
-#define DIODE_DIRECTION COL2ROW
-
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
#define LOCKING_SUPPORT_ENABLE
/* Locking resynchronize hack */
diff --git a/keyboards/handwired/aranck/info.json b/keyboards/handwired/aranck/info.json
index dd48558b14..7d2ea6124b 100644
--- a/keyboards/handwired/aranck/info.json
+++ b/keyboards/handwired/aranck/info.json
@@ -8,6 +8,11 @@
"pid": "0x0000",
"device_version": "0.0.1"
},
+ "matrix_pins": {
+ "cols": ["C6", "D7", "E6", "B4", "B6", "B2", "B3", "B1", "F7", "F6", "F5", "F4"],
+ "rows": ["D3", "D2", "D1", "D0"]
+ },
+ "diode_direction": "COL2ROW",
"processor": "atmega32u4",
"bootloader": "caterina",
"community_layouts": ["planck_mit"],
diff --git a/keyboards/handwired/arrow_pad/config.h b/keyboards/handwired/arrow_pad/config.h
index 6861311460..2ed5b28c87 100644
--- a/keyboards/handwired/arrow_pad/config.h
+++ b/keyboards/handwired/arrow_pad/config.h
@@ -17,23 +17,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
#pragma once
-
-/*
- * Keyboard Matrix Assignments
- *
- * Change this to how you wired your keyboard
- * COLS: AVR pins used for columns, left to right
- * ROWS: AVR pins used for rows, top to bottom
- * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
- * ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
- *
-*/
-#define MATRIX_ROW_PINS { F0, F1, F4, F5, F6, F7 }
-#define MATRIX_COL_PINS { B0, B1, B2, B3 }
-
-/* COL2ROW or ROW2COL */
-#define DIODE_DIRECTION ROW2COL
-
#define FORCE_NKRO
/*
diff --git a/keyboards/handwired/arrow_pad/info.json b/keyboards/handwired/arrow_pad/info.json
index 8451637df5..91690cf83e 100644
--- a/keyboards/handwired/arrow_pad/info.json
+++ b/keyboards/handwired/arrow_pad/info.json
@@ -8,6 +8,11 @@
"pid": "0x4096",
"device_version": "0.0.1"
},
+ "matrix_pins": {
+ "cols": ["B0", "B1", "B2", "B3"],
+ "rows": ["F0", "F1", "F4", "F5", "F6", "F7"]
+ },
+ "diode_direction": "ROW2COL",
"backlight": {
"pin": "B7"
},
diff --git a/keyboards/handwired/atreus50/config.h b/keyboards/handwired/atreus50/config.h
index 69a24d9038..9876e14fd3 100644
--- a/keyboards/handwired/atreus50/config.h
+++ b/keyboards/handwired/atreus50/config.h
@@ -17,14 +17,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
#pragma once
-
-/* Planck PCB default pin-out */
-#define MATRIX_ROW_PINS { D3, D2, D1, D0 }
-#define MATRIX_COL_PINS { D4, D7, E6, B4, B5, B6, B2, B3, B1, F7, F6, F5, F4 }
-
-/* COL2ROW or ROW2COL */
-#define DIODE_DIRECTION COL2ROW
-
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
#define LOCKING_SUPPORT_ENABLE
/* Locking resynchronize hack */
diff --git a/keyboards/handwired/atreus50/info.json b/keyboards/handwired/atreus50/info.json
index 2ef04b31f4..4b12ba33d4 100644
--- a/keyboards/handwired/atreus50/info.json
+++ b/keyboards/handwired/atreus50/info.json
@@ -8,6 +8,11 @@
"pid": "0x040D",
"device_version": "0.0.1"
},
+ "matrix_pins": {
+ "cols": ["D4", "D7", "E6", "B4", "B5", "B6", "B2", "B3", "B1", "F7", "F6", "F5", "F4"],
+ "rows": ["D3", "D2", "D1", "D0"]
+ },
+ "diode_direction": "COL2ROW",
"processor": "atmega32u4",
"bootloader": "caterina",
"layouts": {
diff --git a/keyboards/handwired/axon/config.h b/keyboards/handwired/axon/config.h
index a4b2c64c66..dcf26800ca 100644
--- a/keyboards/handwired/axon/config.h
+++ b/keyboards/handwired/axon/config.h
@@ -17,14 +17,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
#pragma once
-
-/* key matrix pins */
-#define MATRIX_ROW_PINS { D5, D6, D4, D0 }
-#define MATRIX_COL_PINS { B0, D7, B1, B2, C0, C1, C2, C3, C4, C5, D1 }
-
-/* COL2ROW or ROW2COL */
-#define DIODE_DIRECTION COL2ROW
-
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
#define LOCKING_SUPPORT_ENABLE
diff --git a/keyboards/handwired/axon/info.json b/keyboards/handwired/axon/info.json
index 0bf0deaaf3..89300e2398 100644
--- a/keyboards/handwired/axon/info.json
+++ b/keyboards/handwired/axon/info.json
@@ -8,6 +8,11 @@
"pid": "0x6060",
"device_version": "0.0.1"
},
+ "matrix_pins": {
+ "cols": ["B0", "D7", "B1", "B2", "C0", "C1", "C2", "C3", "C4", "C5", "D1"],
+ "rows": ["D5", "D6", "D4", "D0"]
+ },
+ "diode_direction": "COL2ROW",
"processor": "atmega328p",
"bootloader": "usbasploader",
"layouts": {
diff --git a/keyboards/handwired/battleship_gamepad/config.h b/keyboards/handwired/battleship_gamepad/config.h
index e28cd08a2a..f2eee84a57 100644
--- a/keyboards/handwired/battleship_gamepad/config.h
+++ b/keyboards/handwired/battleship_gamepad/config.h
@@ -16,19 +16,11 @@
#pragma once
-
-/* key matrix pins */
-#define MATRIX_ROW_PINS { B6, B2, B3, B1, F7 }
-#define MATRIX_COL_PINS { D1, D0, D4, C6, D7, E6, B4, B5 }
-
/* joystick configuration */
#define JOYSTICK_BUTTON_COUNT 25
#define JOYSTICK_AXIS_COUNT 2
#define JOYSTICK_AXIS_RESOLUTION 10
-/* COL2ROW or ROW2COL */
-#define DIODE_DIRECTION COL2ROW
-
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
#define LOCKING_SUPPORT_ENABLE
diff --git a/keyboards/handwired/battleship_gamepad/info.json b/keyboards/handwired/battleship_gamepad/info.json
index d4705a5c5f..06ef96ba21 100644
--- a/keyboards/handwired/battleship_gamepad/info.json
+++ b/keyboards/handwired/battleship_gamepad/info.json
@@ -8,6 +8,11 @@
"pid": "0x0000",
"device_version": "0.0.1"
},
+ "matrix_pins": {
+ "cols": ["D1", "D0", "D4", "C6", "D7", "E6", "B4", "B5"],
+ "rows": ["B6", "B2", "B3", "B1", "F7"]
+ },
+ "diode_direction": "COL2ROW",
"processor": "atmega32u4",
"bootloader": "caterina",
"layouts": {
diff --git a/keyboards/handwired/bigmac/config.h b/keyboards/handwired/bigmac/config.h
deleted file mode 100644
index f33849faf7..0000000000
--- a/keyboards/handwired/bigmac/config.h
+++ /dev/null
@@ -1,33 +0,0 @@
-/* Copyright 2020 Taylore101
- *
- * This program is free software: you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation, either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program. If not, see <http://www.gnu.org/licenses/>.
- */
-
-#pragma once
-
-
-/*
- * Keyboard Matrix Assignments
- *
- * Change this to how you wired your keyboard
- * COLS: AVR pins used for columns, left to right
- * ROWS: AVR pins used for rows, top to bottom
- * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
- * ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
- *
- */
-#define MATRIX_ROW_PINS { F0, F1, C7, D5, B7 }
-#define MATRIX_COL_PINS { B6, B2, B3, B1, F7, F6, F5, F4, D3, D2, D1, D0, D4, C6, D7, E6, B4 }
-
-#define DIODE_DIRECTION COL2ROW
diff --git a/keyboards/handwired/bigmac/info.json b/keyboards/handwired/bigmac/info.json
index 853bd946ad..13c523245c 100644
--- a/keyboards/handwired/bigmac/info.json
+++ b/keyboards/handwired/bigmac/info.json
@@ -8,6 +8,11 @@
"pid": "0x1010",
"device_version": "0.0.1"
},
+ "matrix_pins": {
+ "cols": ["B6", "B2", "B3", "B1", "F7", "F6", "F5", "F4", "D3", "D2", "D1", "D0", "D4", "C6", "D7", "E6", "B4"],
+ "rows": ["F0", "F1", "C7", "D5", "B7"]
+ },
+ "diode_direction": "COL2ROW",
"processor": "atmega32u4",
"bootloader": "atmel-dfu",
"layouts": {
diff --git a/keyboards/handwired/bolek/config.h b/keyboards/handwired/bolek/config.h
index ec81b3337a..02f5f29c3f 100644
--- a/keyboards/handwired/bolek/config.h
+++ b/keyboards/handwired/bolek/config.h
@@ -17,23 +17,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
#pragma once
-
-/*
- * Keyboard Matrix Assignments
- *
- * Change this to how you wired your keyboard
- * COLS: AVR pins used for columns, left to right
- * ROWS: AVR pins used for rows, top to bottom
- * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
- * ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
- *
- */
-#define MATRIX_ROW_PINS { F4, F5, F6, B5, D3, D2, D1, B4 }
-#define MATRIX_COL_PINS { B6, B2, B3, B1, F7, E6, D7, C6, D0, D4 }
-
-/* COL2ROW, ROW2COL */
-#define DIODE_DIRECTION COL2ROW
-
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
#define LOCKING_SUPPORT_ENABLE
/* Locking resynchronize hack */
diff --git a/keyboards/handwired/bolek/info.json b/keyboards/handwired/bolek/info.json
index 410ed8b933..e72d4f45fb 100644
--- a/keyboards/handwired/bolek/info.json
+++ b/keyboards/handwired/bolek/info.json
@@ -8,6 +8,11 @@
"pid": "0x3708",
"device_version": "0.0.1"
},
+ "matrix_pins": {
+ "cols": ["B6", "B2", "B3", "B1", "F7", "E6", "D7", "C6", "D0", "D4"],
+ "rows": ["F4", "F5", "F6", "B5", "D3", "D2", "D1", "B4"]
+ },
+ "diode_direction": "COL2ROW",
"processor": "atmega32u4",
"bootloader": "caterina",
"layouts": {
diff --git a/keyboards/handwired/boss566y/redragon_vara/config.h b/keyboards/handwired/boss566y/redragon_vara/config.h
deleted file mode 100644
index d7e3fbe200..0000000000
--- a/keyboards/handwired/boss566y/redragon_vara/config.h
+++ /dev/null
@@ -1,34 +0,0 @@
-/*
-Copyright 2020 boss566y
-
-This program is free software: you can redistribute it and/or modify
-it under the terms of the GNU General Public License as published by
-the Free Software Foundation, either version 2 of the License, or
-(at your option) any later version.
-
-This program is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-GNU General Public License for more details.
-
-You should have received a copy of the GNU General Public License
-along with this program. If not, see <http://www.gnu.org/licenses/>.
-*/
-
-#pragma once
-
-
-/*
- * Keyboard Matrix Assignments
- *
- * Change this to how you wired your keyboard
- * COLS: AVR pins used for columns, left to right
- * ROWS: AVR pins used for rows, top to bottom
- * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
- * ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
- *
- */
-#define MATRIX_ROW_PINS { B0, B1, B2, B3, B7, D0, F0, F1, F4, F5, F6, F7 }
-#define MATRIX_COL_PINS { D1, D2, D3, C6, D5, C7, D4, D7, B4, B5, B6 }
-
-#define DIODE_DIRECTION COL2ROW
diff --git a/keyboards/handwired/boss566y/redragon_vara/info.json b/keyboards/handwired/boss566y/redragon_vara/info.json
index 697cfac226..f29633d429 100644
--- a/keyboards/handwired/boss566y/redragon_vara/info.json
+++ b/keyboards/handwired/boss566y/redragon_vara/info.json
@@ -8,6 +8,11 @@
"pid": "0x0001",
"device_version": "0.0.1"
},
+ "matrix_pins": {
+ "cols": ["D1", "D2", "D3", "C6", "D5", "C7", "D4", "D7", "B4", "B5", "B6"],
+ "rows": ["B0", "B1", "B2", "B3", "B7", "D0", "F0", "F1", "F4", "F5", "F6", "F7"]
+ },
+ "diode_direction": "COL2ROW",
"processor": "atmega32u4",
"bootloader": "halfkay",
"community_layouts": ["fullsize_ansi"],
diff --git a/keyboards/handwired/brain/config.h b/keyboards/handwired/brain/config.h
index 9b7c48da75..088f03a379 100644
--- a/keyboards/handwired/brain/config.h
+++ b/keyboards/handwired/brain/config.h
@@ -23,18 +23,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
#define SPLIT_USB_DETECT
-// wiring of each half
-
-#define MATRIX_COL_PINS \
- { D1, D4, C6, D7, E6, B4, B5 }
-#define MATRIX_ROW_PINS \
- { F4, F5, F6, F7, B1 }
-
-#define MATRIX_COL_PINS_RIGHT \
- { B5, B4, E6, D7, C6, D4, D1 }
-
-#define DIODE_DIRECTION COL2ROW
-
/* mouse config */
#define MOUSEKEY_INTERVAL 20
#define MOUSEKEY_DELAY 0
diff --git a/keyboards/handwired/brain/info.json b/keyboards/handwired/brain/info.json
index a085da297f..aad4662d72 100644
--- a/keyboards/handwired/brain/info.json
+++ b/keyboards/handwired/brain/info.json
@@ -8,6 +8,11 @@
"pid": "0x0001",
"device_version": "0.0.1"
},
+ "matrix_pins": {
+ "cols": ["D1", "D4", "C6", "D7", "E6", "B4", "B5"],
+ "rows": ["F4", "F5", "F6", "F7", "B1"]
+ },
+ "diode_direction": "COL2ROW",
"bootmagic": {
"matrix": [0, 6]
},
@@ -15,6 +20,11 @@
"soft_serial_pin": "D0",
"bootmagic": {
"matrix": [5, 0]
+ },
+ "matrix_pins": {
+ "right": {
+ "cols": ["B5", "B4", "E6", "D7", "C6", "D4", "D1"]
+ }
}
},
"processor": "atmega32u4",
diff --git a/keyboards/handwired/bstk100/config.h b/keyboards/handwired/bstk100/config.h
index 2a14eca16a..2a30bd3363 100644
--- a/keyboards/handwired/bstk100/config.h
+++ b/keyboards/handwired/bstk100/config.h
@@ -18,23 +18,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
#pragma once
-
-/*
- * Keyboard Matrix Assignments
- *
- * Change this to how you wired your keyboard
- * COLS: AVR pins used for columns, left to right
- * ROWS: AVR pins used for rows, top to bottom
- * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
- * ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
- *
- */
-#define MATRIX_ROW_PINS { B6, B2, B3, B1, F7 }
-#define MATRIX_COL_PINS { B5, B4, E6, D7, C6 }
-
-/* COL2ROW, ROW2COL */
-#define DIODE_DIRECTION COL2ROW
-
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
#define LOCKING_SUPPORT_ENABLE
/* Locking resynchronize hack */
diff --git a/keyboards/handwired/bstk100/info.json b/keyboards/handwired/bstk100/info.json
index 03580c3332..4d316b4397 100644
--- a/keyboards/handwired/bstk100/info.json
+++ b/keyboards/handwired/bstk100/info.json
@@ -8,6 +8,11 @@
"pid": "0xB100",
"device_version": "0.0.1"
},
+ "matrix_pins": {
+ "cols": ["B5", "B4", "E6", "D7", "C6"],
+ "rows": ["B6", "B2", "B3", "B1", "F7"]
+ },
+ "diode_direction": "COL2ROW",
"indicators": {
"caps_lock": "D5",
"num_lock": "D4",
diff --git a/keyboards/handwired/cans12er/config.h b/keyboards/handwired/cans12er/config.h
index 74a7679e0b..5f36081323 100644
--- a/keyboards/handwired/cans12er/config.h
+++ b/keyboards/handwired/cans12er/config.h
@@ -1,13 +1,5 @@
#pragma once
-
-/* key matrix pins */
-#define MATRIX_ROW_PINS { F7, B1, B3 }
-#define MATRIX_COL_PINS { D0, D4, C6, D7 }
-
-/* COL2ROW or ROW2COL */
-#define DIODE_DIRECTION ROW2COL
-
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
#define LOCKING_SUPPORT_ENABLE
diff --git a/keyboards/handwired/cans12er/info.json b/keyboards/handwired/cans12er/info.json
index 37dd424299..e3938ebc42 100644
--- a/keyboards/handwired/cans12er/info.json
+++ b/keyboards/handwired/cans12er/info.json
@@ -8,6 +8,11 @@
"pid": "0x6060",
"device_version": "0.0.1"
},
+ "matrix_pins": {
+ "cols": ["D0", "D4", "C6", "D7"],
+ "rows": ["F7", "B1", "B3"]
+ },
+ "diode_direction": "ROW2COL",
"processor": "atmega32u4",
"bootloader": "atmel-dfu",
"layouts": {
diff --git a/keyboards/handwired/carpolly/config.h b/keyboards/handwired/carpolly/config.h
deleted file mode 100644
index 4c2410ca98..0000000000
--- a/keyboards/handwired/carpolly/config.h
+++ /dev/null
@@ -1,37 +0,0 @@
-/* Copyright 2021 Paul Enrico N. Viola
- *
- * This program is free software: you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation, either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program. If not, see <http://www.gnu.org/licenses/>.
- */
-
-#pragma once
-
-
-/*
- * Keyboard Matrix Assignments
- *
- * Change this to how you wired your keyboard
- * COLS: AVR pins used for columns, left to right
- * ROWS: AVR pins used for rows, top to bottom
- * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
- * ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
- *
- */
-#define MATRIX_ROW_PINS { B0, B1, B2, B3 }
-#define MATRIX_COL_PINS { F0, F1, F4, F5, F6, B6, B5, B4, D7, D6, D4, D5, C7 }
-
-#define DIODE_DIRECTION COL2ROW
-
-
-// generated by KBFirmware JSON to QMK Parser
-// https://noroadsleft.github.io/kbf_qmk_converter/
diff --git a/keyboards/handwired/carpolly/info.json b/keyboards/handwired/carpolly/info.json
index 482af57cc1..3cac934d6e 100644
--- a/keyboards/handwired/carpolly/info.json
+++ b/keyboards/handwired/carpolly/info.json
@@ -8,6 +8,11 @@
"pid": "0x0017",
"device_version": "0.0.1"
},
+ "matrix_pins": {
+ "cols": ["F0", "F1", "F4", "F5", "F6", "B6", "B5", "B4", "D7", "D6", "D4", "D5", "C7"],
+ "rows": ["B0", "B1", "B2", "B3"]
+ },
+ "diode_direction": "COL2ROW",
"processor": "atmega32u4",
"bootloader": "atmel-dfu",
"layouts": {
diff --git a/keyboards/handwired/chiron/config.h b/keyboards/handwired/chiron/config.h
index d881fecbaa..5a01accc73 100644
--- a/keyboards/handwired/chiron/config.h
+++ b/keyboards/handwired/chiron/config.h
@@ -17,18 +17,9 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
#pragma once
-
-// Pro Micro Pins 4, 6, 7, 8, 9
-#define MATRIX_ROW_PINS { D4, D7, E6, B4, B5 }
-// Pro Micro Pins A3, A2, A1, A0, 15, 14, 16
-#define MATRIX_COL_PINS { F4, F5, F6, F7, B1, B3, B2 }
-
-
// Pro Micro Pins RX1
#define SPLIT_HAND_PIN D2
-#define DIODE_DIRECTION COL2ROW
-
#define LOCKING_SUPPORT_ENABLE
#define LOCKING_RESYNC_ENABLE
diff --git a/keyboards/handwired/chiron/info.json b/keyboards/handwired/chiron/info.json
index b1590d8ded..e737e8428c 100644
--- a/keyboards/handwired/chiron/info.json
+++ b/keyboards/handwired/chiron/info.json
@@ -8,6 +8,11 @@
"pid": "0x0000",
"device_version": "0.0.1"
},
+ "matrix_pins": {
+ "cols": ["F4", "F5", "F6", "F7", "B1", "B3", "B2"],
+ "rows": ["D4", "D7", "E6", "B4", "B5"]
+ },
+ "diode_direction": "COL2ROW",
"backlight": {
"pin": "B6",
"levels": 7
diff --git a/keyboards/handwired/ck4x4/config.h b/keyboards/handwired/ck4x4/config.h
index 0a5d6c5c6a..6a40218df2 100644
--- a/keyboards/handwired/ck4x4/config.h
+++ b/keyboards/handwired/ck4x4/config.h
@@ -17,10 +17,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
#pragma once
-#define MATRIX_COL_PINS { B7, B8, B9, B10 }
-#define MATRIX_ROW_PINS { B3, B4, B5, B6 }
-#define DIODE_DIRECTION COL2ROW
-
//LEDS A6, RGB B15
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
diff --git a/keyboards/handwired/ck4x4/info.json b/keyboards/handwired/ck4x4/info.json
index 17541e918f..661f4edb2a 100644
--- a/keyboards/handwired/ck4x4/info.json
+++ b/keyboards/handwired/ck4x4/info.json
@@ -8,6 +8,11 @@
"pid": "0x6464",
"device_version": "0.0.1"
},
+ "matrix_pins": {
+ "cols": ["B7", "B8", "B9", "B10"],
+ "rows": ["B3", "B4", "B5", "B6"]
+ },
+ "diode_direction": "COL2ROW",
"processor": "STM32F072",
"bootloader": "stm32-dfu",
"layouts": {
diff --git a/keyboards/handwired/cmd60/config.h b/keyboards/handwired/cmd60/config.h
index 6ec23cbd19..b9449c4714 100644
--- a/keyboards/handwired/cmd60/config.h
+++ b/keyboards/handwired/cmd60/config.h
@@ -17,23 +17,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
#pragma once
-
-/*
- * Keyboard Matrix Assignments
- *
- * Change this to how you wired your keyboard
- * COLS: AVR pins used for columns, left to right
- * ROWS: AVR pins used for rows, top to bottom
- * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
- * ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
- *
-*/
-#define MATRIX_ROW_PINS { F0, F4, F5, F6, F7 }
-#define MATRIX_COL_PINS { B0, B1, B2, B3, B7, D0, D1, D2, D3, C6, D7, B4, B5, B6 }
-
-/* COL2ROW or ROW2COL */
-#define DIODE_DIRECTION COL2ROW
-
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
#define LOCKING_SUPPORT_ENABLE
/* Locking resynchronize hack */
diff --git a/keyboards/handwired/cmd60/info.json b/keyboards/handwired/cmd60/info.json
index 635bead900..f3db2960f5 100644
--- a/keyboards/handwired/cmd60/info.json
+++ b/keyboards/handwired/cmd60/info.json
@@ -8,6 +8,11 @@
"pid": "0x6060",
"device_version": "0.0.1"
},
+ "matrix_pins": {
+ "cols": ["B0", "B1", "B2", "B3", "B7", "D0", "D1", "D2", "D3", "C6", "D7", "B4", "B5", "B6"],
+ "rows": ["F0", "F4", "F5", "F6", "F7"]
+ },
+ "diode_direction": "COL2ROW",
"processor": "atmega32u4",
"bootloader": "halfkay",
"layouts": {
diff --git a/keyboards/handwired/co60/rev1/config.h b/keyboards/handwired/co60/rev1/config.h
deleted file mode 100644
index c42a0d5b0c..0000000000
--- a/keyboards/handwired/co60/rev1/config.h
+++ /dev/null
@@ -1,51 +0,0 @@
-/*
-Copyright 2018 John M Daly <jmdaly@gmail.com>
-
-This program is free software: you can redistribute it and/or modify
-it under the terms of the GNU General Public License as published by
-the Free Software Foundation, either version 2 of the License, or
-(at your option) any later version.
-
-This program is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-GNU General Public License for more details.
-
-You should have received a copy of the GNU General Public License
-along with this program. If not, see <http://www.gnu.org/licenses/>.
-*/
-
-#pragma once
-
-
-/*
- * Keyboard Matrix Assignments
- *
- * Change this to how you wired your keyboard
- * COLS: AVR pins used for columns, left to right
- * ROWS: AVR pins used for rows, top to bottom
- * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
- * ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
- *
-*/
-#define MATRIX_ROW_PINS { D0, D1, D2, D3, D5 }
-#define MATRIX_COL_PINS { F0, F1, E6, C7, C6, B6, D4, B1, B2, B5, B4, D7, D6, B3, B0 }
-
-/* COL2ROW, ROW2COL */
-#define DIODE_DIRECTION COL2ROW
-
-/*
- * Feature disable options
- * These options are also useful to firmware size reduction.
- */
-
-/* disable debug print */
-//#define NO_DEBUG
-
-/* disable print */
-//#define NO_PRINT
-
-/* disable action features */
-//#define NO_ACTION_LAYER
-//#define NO_ACTION_TAPPING
-//#define NO_ACTION_ONESHOT
diff --git a/keyboards/handwired/co60/rev1/info.json b/keyboards/handwired/co60/rev1/info.json
index 05a7a3a336..6ded2d0cc1 100644
--- a/keyboards/handwired/co60/rev1/info.json
+++ b/keyboards/handwired/co60/rev1/info.json
@@ -3,6 +3,11 @@
"usb": {
"device_version": "1.0.0"
},
+ "matrix_pins": {
+ "cols": ["F0", "F1", "E6", "C7", "C6", "B6", "D4", "B1", "B2", "B5", "B4", "D7", "D6", "B3", "B0"],
+ "rows": ["D0", "D1", "D2", "D3", "D5"]
+ },
+ "diode_direction": "COL2ROW",
"backlight": {
"pin": "B7",
"breathing": true
diff --git a/keyboards/handwired/co60/rev6/config.h b/keyboards/handwired/co60/rev6/config.h
index 6f938b06b7..fa1c24a396 100644
--- a/keyboards/handwired/co60/rev6/config.h
+++ b/keyboards/handwired/co60/rev6/config.h
@@ -16,15 +16,6 @@
*/
#pragma once
-
-/* ROWS: Top to bottom, COLS: Left to right
-*/
-#define MATRIX_ROW_PINS { B0, B1, B2, A15, A10 }
-#define MATRIX_COL_PINS { A2, A3, A6, B14, B15, A8, A9, A7, B3, B4, C14, C15, C13, B5, B6 }
-
-/* COL2ROW, ROW2COL */
-#define DIODE_DIRECTION COL2ROW
-
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
#define LOCKING_SUPPORT_ENABLE
/* Locking resynchronize hack */
diff --git a/keyboards/handwired/co60/rev6/info.json b/keyboards/handwired/co60/rev6/info.json
index a189309496..2fd3182583 100644
--- a/keyboards/handwired/co60/rev6/info.json
+++ b/keyboards/handwired/co60/rev6/info.json
@@ -3,6 +3,11 @@
"usb": {
"device_version": "6.0.0"
},
+ "matrix_pins": {
+ "cols": ["A2", "A3", "A6", "B14", "B15", "A8", "A9", "A7", "B3", "B4", "C14", "C15", "C13", "B5", "B6"],
+ "rows": ["B0", "B1", "B2", "A15", "A10"]
+ },
+ "diode_direction": "COL2ROW",
"backlight": {
"pin": "B8",
"breathing": true
diff --git a/keyboards/handwired/co60/rev7/config.h b/keyboards/handwired/co60/rev7/config.h
index 6647698dfb..d31fe37783 100644
--- a/keyboards/handwired/co60/rev7/config.h
+++ b/keyboards/handwired/co60/rev7/config.h
@@ -17,15 +17,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
#pragma once
-
-/* ROWS: Top to bottom, COLS: Left to right
-*/
-#define MATRIX_ROW_PINS { A8, A2, B13, B2, B10 }
-#define MATRIX_COL_PINS { A10, A9, A3, A4, A5, A6, B0, B1, A15, B3, B4, B5, C13, C14, C15 }
-
-/* COL2ROW, ROW2COL */
-#define DIODE_DIRECTION COL2ROW
-
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
#define LOCKING_SUPPORT_ENABLE
/* Locking resynchronize hack */
diff --git a/keyboards/handwired/co60/rev7/info.json b/keyboards/handwired/co60/rev7/info.json
index 67d54fb0fb..eecfabfca3 100644
--- a/keyboards/handwired/co60/rev7/info.json
+++ b/keyboards/handwired/co60/rev7/info.json
@@ -3,6 +3,11 @@
"usb": {
"device_version": "7.0.0"
},
+ "matrix_pins": {
+ "cols": ["A10", "A9", "A3", "A4", "A5", "A6", "B0", "B1", "A15", "B3", "B4", "B5", "C13", "C14", "C15"],
+ "rows": ["A8", "A2", "B13", "B2", "B10"]
+ },
+ "diode_direction": "COL2ROW",
"backlight": {
"pin": "B8",
"breathing": true
diff --git a/keyboards/handwired/colorlice/config.h b/keyboards/handwired/colorlice/config.h
index 4e981b4428..36417b4a7b 100644
--- a/keyboards/handwired/colorlice/config.h
+++ b/keyboards/handwired/colorlice/config.h
@@ -17,14 +17,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
#pragma once
-
-/* key matrix pins */
-#define MATRIX_ROW_PINS { D0, D1, D2, D3, D5 }
-#define MATRIX_COL_PINS { F0, F1, F4, F5, F6, F7, C7, B6, B5, B4, D7, D6, D4, E6, B0, B3 }
-
-/* COL2ROW or ROW2COL */
-#define DIODE_DIRECTION COL2ROW
-
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
#define LOCKING_SUPPORT_ENABLE
/* Locking resynchronize hack */
diff --git a/keyboards/handwired/colorlice/info.json b/keyboards/handwired/colorlice/info.json
index 9a884c6718..66e5836a15 100644
--- a/keyboards/handwired/colorlice/info.json
+++ b/keyboards/handwired/colorlice/info.json
@@ -8,6 +8,11 @@
"pid": "0x0302",
"device_version": "0.0.1"
},
+ "matrix_pins": {
+ "cols": ["F0", "F1", "F4", "F5", "F6", "F7", "C7", "B6", "B5", "B4", "D7", "D6", "D4", "E6", "B0", "B3"],
+ "rows": ["D0", "D1", "D2", "D3", "D5"]
+ },
+ "diode_direction": "COL2ROW",
"processor": "atmega32u4",
"bootloader": "atmel-dfu",
"community_layouts": ["alice_split_bs"],
diff --git a/keyboards/handwired/concertina/64key/config.h b/keyboards/handwired/concertina/64key/config.h
index 2eb9a4cd67..29473a1720 100644
--- a/keyboards/handwired/concertina/64key/config.h
+++ b/keyboards/handwired/concertina/64key/config.h
@@ -16,14 +16,8 @@
#pragma once
-
-#define MATRIX_ROW_PINS { D1, D0, D4, C6, D7, E6, B4, B5 }
-#define MATRIX_COL_PINS { F4, F5, F6, F7, B1, B3, B2, B6 }
-
/* LEDs are not used in the standard 64key configuration. */
#define RGB_DI_PIN D3
#define RGBLED_NUM 0
-#define DIODE_DIRECTION COL2ROW
-
#define PERMISSIVE_HOLD
diff --git a/keyboards/handwired/concertina/64key/info.json b/keyboards/handwired/concertina/64key/info.json
index 39db710673..86a5a1326c 100644
--- a/keyboards/handwired/concertina/64key/info.json
+++ b/keyboards/handwired/concertina/64key/info.json
@@ -8,6 +8,11 @@
"pid": "0x3632",
"device_version": "0.0.1"
},
+ "matrix_pins": {
+ "cols": ["F4", "F5", "F6", "F7", "B1", "B3", "B2", "B6"],
+ "rows": ["D1", "D0", "D4", "C6", "D7", "E6", "B4", "B5"]
+ },
+ "diode_direction": "COL2ROW",
"processor": "atmega32u4",
"bootloader": "caterina",
"layouts": {
diff --git a/keyboards/handwired/consolekeyboard/18key/config.h b/keyboards/handwired/consolekeyboard/18key/config.h
index 59aa11f675..800ed9d19a 100644
--- a/keyboards/handwired/consolekeyboard/18key/config.h
+++ b/keyboards/handwired/consolekeyboard/18key/config.h
@@ -16,22 +16,6 @@
#pragma once
-
-/*
- * Keyboard Matrix Assignments
- *
- * Change this to how you wired your keyboard
- * COLS: AVR pins used for columns, left to right
- * ROWS: AVR pins used for rows, top to bottom
- * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
- * ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
- *
- */
-#define MATRIX_ROW_PINS { D1, D0 }
-#define MATRIX_COL_PINS { D4, C6, D7, C4, B1, B3, B2, B6, C5, E6, B4 }
-
-#define DIODE_DIRECTION COL2ROW
-
#define RGB_DI_PIN F4
#ifdef RGB_DI_PIN
#define RGBLED_NUM 6
diff --git a/keyboards/handwired/consolekeyboard/18key/info.json b/keyboards/handwired/consolekeyboard/18key/info.json
index 9fb64bcf21..a7c04ae242 100644
--- a/keyboards/handwired/consolekeyboard/18key/info.json
+++ b/keyboards/handwired/consolekeyboard/18key/info.json
@@ -8,6 +8,11 @@
"pid": "0x3332",
"device_version": "0.0.1"
},
+ "matrix_pins": {
+ "cols": ["D4", "C6", "D7", "C4", "B1", "B3", "B2", "B6", "C5", "E6", "B4"],
+ "rows": ["D1", "D0"]
+ },
+ "diode_direction": "COL2ROW",
"processor": "atmega32u4",
"bootloader": "caterina",
"layouts": {
diff --git a/keyboards/handwired/consolekeyboard/20key/config.h b/keyboards/handwired/consolekeyboard/20key/config.h
index 7d8f67d24e..800ed9d19a 100644
--- a/keyboards/handwired/consolekeyboard/20key/config.h
+++ b/keyboards/handwired/consolekeyboard/20key/config.h
@@ -16,22 +16,6 @@
#pragma once
-
-/*
- * Keyboard Matrix Assignments
- *
- * Change this to how you wired your keyboard
- * COLS: AVR pins used for columns, left to right
- * ROWS: AVR pins used for rows, top to bottom
- * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
- * ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
- *
- */
-#define MATRIX_ROW_PINS { D1, D0 }
-#define MATRIX_COL_PINS { D4, C6, D7, C4, B1, B3, B2, B6, C5, E6, B4, B5 }
-
-#define DIODE_DIRECTION COL2ROW
-
#define RGB_DI_PIN F4
#ifdef RGB_DI_PIN
#define RGBLED_NUM 6
diff --git a/keyboards/handwired/consolekeyboard/20key/info.json b/keyboards/handwired/consolekeyboard/20key/info.json
index 085815f58a..4d99a74d5b 100644
--- a/keyboards/handwired/consolekeyboard/20key/info.json
+++ b/keyboards/handwired/consolekeyboard/20key/info.json
@@ -8,6 +8,11 @@
"pid": "0x3432",
"device_version": "0.0.1"
},
+ "matrix_pins": {
+ "cols": ["D4", "C6", "D7", "C4", "B1", "B3", "B2", "B6", "C5", "E6", "B4", "B5"],
+ "rows": ["D1", "D0"]
+ },
+ "diode_direction": "COL2ROW",
"processor": "atmega32u4",
"bootloader": "caterina",
"layouts": {
diff --git a/keyboards/handwired/consolekeyboard/27key/config.h b/keyboards/handwired/consolekeyboard/27key/config.h
index 59966bc857..800ed9d19a 100644
--- a/keyboards/handwired/consolekeyboard/27key/config.h
+++ b/keyboards/handwired/consolekeyboard/27key/config.h
@@ -16,22 +16,6 @@
#pragma once
-
-/*
- * Keyboard Matrix Assignments
- *
- * Change this to how you wired your keyboard
- * COLS: AVR pins used for columns, left to right
- * ROWS: AVR pins used for rows, top to bottom
- * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
- * ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
- *
- */
-#define MATRIX_ROW_PINS { D1, D0, F7}
-#define MATRIX_COL_PINS { D4, C6, D7, C4, B1, B3, B2, B6, C5, E6, B4 }
-
-#define DIODE_DIRECTION COL2ROW
-
#define RGB_DI_PIN F4
#ifdef RGB_DI_PIN
#define RGBLED_NUM 6
diff --git a/keyboards/handwired/consolekeyboard/27key/info.json b/keyboards/handwired/consolekeyboard/27key/info.json
index 37124c0196..0f17682dc6 100644
--- a/keyboards/handwired/consolekeyboard/27key/info.json
+++ b/keyboards/handwired/consolekeyboard/27key/info.json
@@ -8,6 +8,11 @@
"pid": "0x3433",
"device_version": "0.0.1"
},
+ "matrix_pins": {
+ "cols": ["D4", "C6", "D7", "C4", "B1", "B3", "B2", "B6", "C5", "E6", "B4"],
+ "rows": ["D1", "D0", "F7"]
+ },
+ "diode_direction": "COL2ROW",
"processor": "atmega32u4",
"bootloader": "caterina",
"layouts": {
diff --git a/keyboards/handwired/consolekeyboard/30key/config.h b/keyboards/handwired/consolekeyboard/30key/config.h
index ba82037cf4..305448feec 100644
--- a/keyboards/handwired/consolekeyboard/30key/config.h
+++ b/keyboards/handwired/consolekeyboard/30key/config.h
@@ -16,22 +16,6 @@
#pragma once
-
-/*
- * Keyboard Matrix Assignments
- *
- * Change this to how you wired your keyboard
- * COLS: AVR pins used for columns, left to right
- * ROWS: AVR pins used for rows, top to bottom
- * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
- * ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
- *
- */
-#define MATRIX_ROW_PINS { D1, D0, F7}
-#define MATRIX_COL_PINS { D4, C6, D7, C4, B1, B3, B2, B6, C5, E6, B4, B5 }
-
-#define DIODE_DIRECTION COL2ROW
-
#define RGB_DI_PIN F4
#ifdef RGB_DI_PIN
#define RGBLED_NUM 6
diff --git a/keyboards/handwired/consolekeyboard/30key/info.json b/keyboards/handwired/consolekeyboard/30key/info.json
index e8f51b2c79..0c53a6fa9c 100644
--- a/keyboards/handwired/consolekeyboard/30key/info.json
+++ b/keyboards/handwired/consolekeyboard/30key/info.json
@@ -8,6 +8,11 @@
"pid": "0x3433",
"device_version": "0.0.1"
},
+ "matrix_pins": {
+ "cols": ["D4", "C6", "D7", "C4", "B1", "B3", "B2", "B6", "C5", "E6", "B4", "B5"],
+ "rows": ["D1", "D0", "F7"]
+ },
+ "diode_direction": "COL2ROW",
"processor": "atmega32u4",
"bootloader": "caterina",
"layouts": {
diff --git a/keyboards/handwired/croxsplit44/config.h b/keyboards/handwired/croxsplit44/config.h
index b76c323641..be2926baf4 100644
--- a/keyboards/handwired/croxsplit44/config.h
+++ b/keyboards/handwired/croxsplit44/config.h
@@ -17,12 +17,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
#pragma once
-
-#define MATRIX_ROW_PINS { D4, D5, D6, D7 }
-#define MATRIX_COL_PINS { B6, B5, B4, D2, C0, C1, F5, F4, F3, F2, F1, F0 }
-
-#define DIODE_DIRECTION COL2ROW
-
#define RGB_DI_PIN C4
#ifdef RGB_DI_PIN
#define RGBLED_NUM 42
diff --git a/keyboards/handwired/croxsplit44/info.json b/keyboards/handwired/croxsplit44/info.json
index 7e5eaca944..c4420fda11 100644
--- a/keyboards/handwired/croxsplit44/info.json
+++ b/keyboards/handwired/croxsplit44/info.json
@@ -8,6 +8,11 @@
"pid": "0x6146",
"device_version": "0.0.1"
},
+ "matrix_pins": {
+ "cols": ["B6", "B5", "B4", "D2", "C0", "C1", "F5", "F4", "F3", "F2", "F1", "F0"],
+ "rows": ["D4", "D5", "D6", "D7"]
+ },
+ "diode_direction": "COL2ROW",
"processor": "at90usb1286",
"bootloader": "atmel-dfu",
"layouts": {
diff --git a/keyboards/handwired/curiosity/config.h b/keyboards/handwired/curiosity/config.h
index bec41310c4..65854bfac7 100644
--- a/keyboards/handwired/curiosity/config.h
+++ b/keyboards/handwired/curiosity/config.h
@@ -17,14 +17,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
#pragma once
-
-/* key matrix pins */
-#define MATRIX_ROW_PINS { D0, F7, F6, F5 }
-#define MATRIX_COL_PINS { D3, D4, F4, C6, D7, E6, B5, B4, B1, B3, B2, B6 }
-
-/* COL2ROW or ROW2COL */
-#define DIODE_DIRECTION COL2ROW
-
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
#define LOCKING_SUPPORT_ENABLE
/* Locking resynchronize hack */
diff --git a/keyboards/handwired/curiosity/info.json b/keyboards/handwired/curiosity/info.json
index 6e796c4d8c..a9a22fc39c 100644
--- a/keyboards/handwired/curiosity/info.json
+++ b/keyboards/handwired/curiosity/info.json
@@ -8,6 +8,11 @@
"pid": "0x4355",
"device_version": "0.0.1"
},
+ "matrix_pins": {
+ "cols": ["D3", "D4", "F4", "C6", "D7", "E6", "B5", "B4", "B1", "B3", "B2", "B6"],
+ "rows": ["D0", "F7", "F6", "F5"]
+ },
+ "diode_direction": "COL2ROW",
"processor": "atmega32u4",
"bootloader": "caterina",
"layouts": {
diff --git a/keyboards/handwired/cyberstar/config.h b/keyboards/handwired/cyberstar/config.h
index a8ecd69985..befd720cc3 100644
--- a/keyboards/handwired/cyberstar/config.h
+++ b/keyboards/handwired/cyberstar/config.h
@@ -17,13 +17,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
#pragma once
-
-#define MATRIX_ROW_PINS { A15, B3, A9, B5, A3 }
-#define MATRIX_COL_PINS { A4, A5, A6, A7, B0, B1, B2, B10, B11, B12, B13, B14, B15, A8, A10, A14, B8, B9 }
-
-/* COL2ROW, ROW2COL*/
-#define DIODE_DIRECTION COL2ROW
-
/* Ensure we jump to bootloader if the QK_BOOT keycode was pressed */
#define EARLY_INIT_PERFORM_BOOTLOADER_JUMP TRUE
diff --git a/keyboards/handwired/cyberstar/info.json b/keyboards/handwired/cyberstar/info.json
index e14b964e21..d83be6176f 100644
--- a/keyboards/handwired/cyberstar/info.json
+++ b/keyboards/handwired/cyberstar/info.json
@@ -8,6 +8,11 @@
"pid": "0x432A",
"device_version": "0.0.1"
},
+ "matrix_pins": {
+ "cols": ["A4", "A5", "A6", "A7", "B0", "B1", "B2", "B10", "B11", "B12", "B13", "B14", "B15", "A8", "A10", "A14", "B8", "B9"],
+ "rows": ["A15", "B3", "A9", "B5", "A3"]
+ },
+ "diode_direction": "COL2ROW",
"processor": "STM32F072",
"bootloader": "stm32-dfu",
"layouts": {
diff --git a/keyboards/handwired/d48/config.h b/keyboards/handwired/d48/config.h
index 23dbfa831c..c793057a92 100644
--- a/keyboards/handwired/d48/config.h
+++ b/keyboards/handwired/d48/config.h
@@ -1,14 +1,5 @@
#pragma once
-
-/* Key matrix pins */
-#define MATRIX_ROW_PINS { B8, B9, B1, B2, B4 }
-
-#define MATRIX_COL_PINS { A2, B0, A7, A8, A13, A14, B12, B11, B10, B15, B14, B13 }
-
-/* COL2ROW or ROW2COL */
-#define DIODE_DIRECTION COL2ROW
-
/* RGB Underglow */
#ifdef RGBLIGHT_ENABLE
#define RGB_DI_PIN A15
diff --git a/keyboards/handwired/d48/info.json b/keyboards/handwired/d48/info.json
index c607f21937..08c9e6a1f8 100644
--- a/keyboards/handwired/d48/info.json
+++ b/keyboards/handwired/d48/info.json
@@ -8,6 +8,11 @@
"pid": "0x6060",
"device_version": "0.0.1"
},
+ "matrix_pins": {
+ "cols": ["A2", "B0", "A7", "A8", "A13", "A14", "B12", "B11", "B10", "B15", "B14", "B13"],
+ "rows": ["B8", "B9", "B1", "B2", "B4"]
+ },
+ "diode_direction": "COL2ROW",
"encoder": {
"rotary": [
{"pin_a": "B3", "pin_b": "A6"},
diff --git a/keyboards/handwired/dactyl_left/config.h b/keyboards/handwired/dactyl_left/config.h
index 1e3f256b70..d7658643b7 100644
--- a/keyboards/handwired/dactyl_left/config.h
+++ b/keyboards/handwired/dactyl_left/config.h
@@ -17,25 +17,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
#pragma once
-
-/*
- * Keyboard Matrix Assignments
- *
- * Change this to how you wired your keyboard
- * COLS: AVR pins used for columns, left to right
- * ROWS: AVR pins used for rows, top to bottom
- * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
- * ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
- *
- */
-#define MATRIX_ROW_PINS \
- { F0, F1, F4, F5, F6, F7 }
-#define MATRIX_COL_PINS \
- { D0, B7, B3, B2, B1, B0 }
-
-/* COL2ROW, ROW2COL*/
-#define DIODE_DIRECTION COL2ROW
-
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
#define LOCKING_SUPPORT_ENABLE
/* Locking resynchronize hack */
diff --git a/keyboards/handwired/dactyl_left/info.json b/keyboards/handwired/dactyl_left/info.json
index 122b5ddf25..e8ce55e001 100644
--- a/keyboards/handwired/dactyl_left/info.json
+++ b/keyboards/handwired/dactyl_left/info.json
@@ -8,6 +8,11 @@
"pid": "0x0000",
"device_version": "0.0.1"
},
+ "matrix_pins": {
+ "cols": ["D0", "B7", "B3", "B2", "B1", "B0"],
+ "rows": ["F0", "F1", "F4", "F5", "F6", "F7"]
+ },
+ "diode_direction": "COL2ROW",
"processor": "atmega32u4",
"bootloader": "halfkay",
"layouts": {
diff --git a/keyboards/handwired/dactyl_manuform/3x5_3/config.h b/keyboards/handwired/dactyl_manuform/3x5_3/config.h
index 33f7c9769e..ddae773bad 100644
--- a/keyboards/handwired/dactyl_manuform/3x5_3/config.h
+++ b/keyboards/handwired/dactyl_manuform/3x5_3/config.h
@@ -16,13 +16,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
#pragma once
-
-// wiring of each half
-#define MATRIX_COL_PINS { C6, D7, E6, B4, B5 }
-#define MATRIX_ROW_PINS { B1, B3, B2, B6 }
-
-#define DIODE_DIRECTION ROW2COL
-
// WS2812 RGB LED strip input and number of LEDs
#define RGB_DI_PIN D3
#define RGB_MATRIX_LED_COUNT 36
diff --git a/keyboards/handwired/dactyl_manuform/3x5_3/info.json b/keyboards/handwired/dactyl_manuform/3x5_3/info.json
index 7302ced47e..f99eba6502 100644
--- a/keyboards/handwired/dactyl_manuform/3x5_3/info.json
+++ b/keyboards/handwired/dactyl_manuform/3x5_3/info.json
@@ -8,6 +8,11 @@
"pid": "0x3536",
"device_version": "0.0.3"
},
+ "matrix_pins": {
+ "cols": ["C6", "D7", "E6", "B4", "B5"],
+ "rows": ["B1", "B3", "B2", "B6"]
+ },
+ "diode_direction": "ROW2COL",
"split": {
"soft_serial_pin": "D0"
},
diff --git a/keyboards/handwired/dactyl_manuform/4x5/config.h b/keyboards/handwired/dactyl_manuform/4x5/config.h
index 8cb68765ba..fbff478bed 100644
--- a/keyboards/handwired/dactyl_manuform/4x5/config.h
+++ b/keyboards/handwired/dactyl_manuform/4x5/config.h
@@ -18,14 +18,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
#pragma once
-
-// wiring of each half
-#define MATRIX_ROW_PINS { F7, B1, B3, B2, B6 }
-// #define MATRIX_COL_PINS { B5, B4, E6, D7, C6 }
-#define MATRIX_COL_PINS { C6, D7, E6, B4, B5 }
-
-#define DIODE_DIRECTION COL2ROW
-
// WS2812 RGB LED strip input and number of LEDs
#define RGB_DI_PIN D3
#define RGBLED_NUM 12
diff --git a/keyboards/handwired/dactyl_manuform/4x5/info.json b/keyboards/handwired/dactyl_manuform/4x5/info.json
index 00e052ce3a..0f47f25afa 100644
--- a/keyboards/handwired/dactyl_manuform/4x5/info.json
+++ b/keyboards/handwired/dactyl_manuform/4x5/info.json
@@ -8,6 +8,11 @@
"pid": "0x3435",
"device_version": "0.0.1"
},
+ "matrix_pins": {
+ "cols": ["C6", "D7", "E6", "B4", "B5"],
+ "rows": ["F7", "B1", "B3", "B2", "B6"]
+ },
+ "diode_direction": "COL2ROW",
"split": {
"soft_serial_pin": "D0"
},
diff --git a/keyboards/handwired/dactyl_manuform/4x5_5/config.h b/keyboards/handwired/dactyl_manuform/4x5_5/config.h
index d0580b7c21..8904c34114 100644
--- a/keyboards/handwired/dactyl_manuform/4x5_5/config.h
+++ b/keyboards/handwired/dactyl_manuform/4x5_5/config.h
@@ -3,12 +3,5 @@
#pragma once
-
-// Wiring pins
-#define MATRIX_ROW_PINS { F7, B1, B3, B2, B4 }
-#define MATRIX_COL_PINS { D4, C6, D7, E6, F6 }
-
-#define DIODE_DIRECTION COL2ROW
-
#define EE_HANDS
#define SPLIT_USB_DETECT
diff --git a/keyboards/handwired/dactyl_manuform/4x5_5/info.json b/keyboards/handwired/dactyl_manuform/4x5_5/info.json
index b762c15cf8..e1f8ed4ccd 100644
--- a/keyboards/handwired/dactyl_manuform/4x5_5/info.json
+++ b/keyboards/handwired/dactyl_manuform/4x5_5/info.json
@@ -8,6 +8,11 @@
"pid": "0x3435",
"device_version": "0.0.1"
},
+ "matrix_pins": {
+ "cols": ["D4", "C6", "D7", "E6", "F6"],
+ "rows": ["F7", "B1", "B3", "B2", "B4"]
+ },
+ "diode_direction": "COL2ROW",
"split": {
"soft_serial_pin": "D0"
},
diff --git a/keyboards/handwired/dactyl_manuform/4x6/config.h b/keyboards/handwired/dactyl_manuform/4x6/config.h
index 64844dd7bf..fbff478bed 100644
--- a/keyboards/handwired/dactyl_manuform/4x6/config.h
+++ b/keyboards/handwired/dactyl_manuform/4x6/config.h
@@ -18,14 +18,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
#pragma once
-
-// row-driven
-#define MATRIX_ROW_PINS { F7, B1, B3, B2, B6 }
-#define MATRIX_COL_PINS { D4, C6, D7, E6, B4, B5 }
-
-/* COL2ROW or ROW2COL */
-#define DIODE_DIRECTION COL2ROW
-
// WS2812 RGB LED strip input and number of LEDs
#define RGB_DI_PIN D3
#define RGBLED_NUM 12
diff --git a/keyboards/handwired/dactyl_manuform/4x6/info.json b/keyboards/handwired/dactyl_manuform/4x6/info.json
index 5d6bb593ca..7f89885c89 100644
--- a/keyboards/handwired/dactyl_manuform/4x6/info.json
+++ b/keyboards/handwired/dactyl_manuform/4x6/info.json
@@ -8,6 +8,11 @@
"pid": "0x3436",
"device_version": "0.0.1"
},
+ "matrix_pins": {
+ "cols": ["D4", "C6", "D7", "E6", "B4", "B5"],
+ "rows": ["F7", "B1", "B3", "B2", "B6"]
+ },
+ "diode_direction": "COL2ROW",
"split": {
"soft_serial_pin": "D0"
},
diff --git a/keyboards/handwired/dactyl_manuform/4x6_5/config.h b/keyboards/handwired/dactyl_manuform/4x6_5/config.h
index 64844dd7bf..fbff478bed 100644
--- a/keyboards/handwired/dactyl_manuform/4x6_5/config.h
+++ b/keyboards/handwired/dactyl_manuform/4x6_5/config.h
@@ -18,14 +18,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
#pragma once
-
-// row-driven
-#define MATRIX_ROW_PINS { F7, B1, B3, B2, B6 }
-#define MATRIX_COL_PINS { D4, C6, D7, E6, B4, B5 }
-
-/* COL2ROW or ROW2COL */
-#define DIODE_DIRECTION COL2ROW
-
// WS2812 RGB LED strip input and number of LEDs
#define RGB_DI_PIN D3
#define RGBLED_NUM 12
diff --git a/keyboards/handwired/dactyl_manuform/4x6_5/info.json b/keyboards/handwired/dactyl_manuform/4x6_5/info.json
index e650d4990c..93f4ec5bc1 100644
--- a/keyboards/handwired/dactyl_manuform/4x6_5/info.json
+++ b/keyboards/handwired/dactyl_manuform/4x6_5/info.json
@@ -8,6 +8,11 @@
"pid": "0x3436",
"device_version": "0.0.1"
},
+ "matrix_pins": {
+ "cols": ["D4", "C6", "D7", "E6", "B4", "B5"],
+ "rows": ["F7", "B1", "B3", "B2", "B6"]
+ },
+ "diode_direction": "COL2ROW",
"split": {
"soft_serial_pin": "D0"
},
diff --git a/keyboards/handwired/dactyl_manuform/5x6/config.h b/keyboards/handwired/dactyl_manuform/5x6/config.h
index 5abd1a68a2..fbff478bed 100644
--- a/keyboards/handwired/dactyl_manuform/5x6/config.h
+++ b/keyboards/handwired/dactyl_manuform/5x6/config.h
@@ -18,13 +18,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
#pragma once
-
-// wiring of each half
-#define MATRIX_COL_PINS { D4, C6, D7, E6, B4, B5 }
-#define MATRIX_ROW_PINS { F6, F7, B1, B3, B2, B6 }
-
-#define DIODE_DIRECTION COL2ROW
-
// WS2812 RGB LED strip input and number of LEDs
#define RGB_DI_PIN D3
#define RGBLED_NUM 12
diff --git a/keyboards/handwired/dactyl_manuform/5x6/info.json b/keyboards/handwired/dactyl_manuform/5x6/info.json
index 28cd7324ba..532a1746d0 100644
--- a/keyboards/handwired/dactyl_manuform/5x6/info.json
+++ b/keyboards/handwired/dactyl_manuform/5x6/info.json
@@ -8,6 +8,11 @@
"pid": "0x3536",
"device_version": "0.0.1"
},
+ "matrix_pins": {
+ "cols": ["D4", "C6", "D7", "E6", "B4", "B5"],
+ "rows": ["F6", "F7", "B1", "B3", "B2", "B6"]
+ },
+ "diode_direction": "COL2ROW",
"split": {
"soft_serial_pin": "D0"
},
diff --git a/keyboards/handwired/dactyl_manuform/5x6_2_5/config.h b/keyboards/handwired/dactyl_manuform/5x6_2_5/config.h
deleted file mode 100644
index 91cd7800d5..0000000000
--- a/keyboards/handwired/dactyl_manuform/5x6_2_5/config.h
+++ /dev/null
@@ -1,33 +0,0 @@
-/*
-Copyright 2020 Jan Christoph Ebersbach
-
-This program is free software: you can redistribute it and/or modify
-it under the terms of the GNU General Public License as published by
-the Free Software Foundation, either version 2 of the License, or
-(at your option) any later version.
-
-This program is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-GNU General Public License for more details.
-
-You should have received a copy of the GNU General Public License
-along with this program. If not, see <http://www.gnu.org/licenses/>.
-*/
-
-#pragma once
-
-
-// left half pro-mirco
-#define MATRIX_COL_PINS { D4, C6, D7, E6, B4, B5 }
-#define MATRIX_ROW_PINS { F6, F7, B1, B3, B2, B6 }
-
-// // right half adafruit feather
-// #define MATRIX_COL_PINS { F1, F0, B1, B2, B3, D2 }
-// #define MATRIX_ROW_PINS { D6, B7, B6, B5, D7, C6 }
-
-#define DIODE_DIRECTION COL2ROW
-
-// WS2812 RGB LED strip input and number of LEDs
-// #define RGB_DI_PIN D3
-// #define RGBLED_NUM 12
diff --git a/keyboards/handwired/dactyl_manuform/5x6_2_5/info.json b/keyboards/handwired/dactyl_manuform/5x6_2_5/info.json
index f6643ce8c8..aaf843b177 100644
--- a/keyboards/handwired/dactyl_manuform/5x6_2_5/info.json
+++ b/keyboards/handwired/dactyl_manuform/5x6_2_5/info.json
@@ -8,6 +8,11 @@
"pid": "0x3536",
"device_version": "0.0.3"
},
+ "matrix_pins": {
+ "cols": ["D4", "C6", "D7", "E6", "B4", "B5"],
+ "rows": ["F6", "F7", "B1", "B3", "B2", "B6"]
+ },
+ "diode_direction": "COL2ROW",
"split": {
"soft_serial_pin": "D0",
"bootmagic": {
diff --git a/keyboards/handwired/dactyl_manuform/5x6_5/config.h b/keyboards/handwired/dactyl_manuform/5x6_5/config.h
deleted file mode 100644
index 65c4afbaf8..0000000000
--- a/keyboards/handwired/dactyl_manuform/5x6_5/config.h
+++ /dev/null
@@ -1,30 +0,0 @@
-/*
-Copyright 2012 Jun Wako <wakojun@gmail.com>
-Copyright 2015 Jack Humbert
-
-This program is free software: you can redistribute it and/or modify
-it under the terms of the GNU General Public License as published by
-the Free Software Foundation, either version 2 of the License, or
-(at your option) any later version.
-
-This program is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-GNU General Public License for more details.
-
-You should have received a copy of the GNU General Public License
-along with this program. If not, see <http://www.gnu.org/licenses/>.
-*/
-
-#pragma once
-
-
-// wiring of each half
-#define MATRIX_COL_PINS { D4, C6, D7, E6, B4, B5 }
-#define MATRIX_ROW_PINS { F6, F7, B1, B3, B2, B6 }
-
-#define DIODE_DIRECTION COL2ROW
-
-// WS2812 RGB LED strip input and number of LEDs
-// #define RGB_DI_PIN D3
-// #define RGBLED_NUM 12
diff --git a/keyboards/handwired/dactyl_manuform/5x6_5/info.json b/keyboards/handwired/dactyl_manuform/5x6_5/info.json
index e422a73131..7494e0ecf4 100644
--- a/keyboards/handwired/dactyl_manuform/5x6_5/info.json
+++ b/keyboards/handwired/dactyl_manuform/5x6_5/info.json
@@ -8,6 +8,11 @@
"pid": "0x3536",
"device_version": "0.0.2"
},
+ "matrix_pins": {
+ "cols": ["D4", "C6", "D7", "E6", "B4", "B5"],
+ "rows": ["F6", "F7", "B1", "B3", "B2", "B6"]
+ },
+ "diode_direction": "COL2ROW",
"split": {
"soft_serial_pin": "D0",
"bootmagic": {
diff --git a/keyboards/handwired/dactyl_manuform/5x6_6/config.h b/keyboards/handwired/dactyl_manuform/5x6_6/config.h
deleted file mode 100644
index 2b99868d19..0000000000
--- a/keyboards/handwired/dactyl_manuform/5x6_6/config.h
+++ /dev/null
@@ -1,24 +0,0 @@
-/*
-Copyright 2022 fgoodwin <fgoodwin@north-tech.net>
-
-This program is free software: you can redistribute it and/or modify
-it under the terms of the GNU General Public License as published by
-the Free Software Foundation, either version 2 of the License, or
-(at your option) any later version.
-
-This program is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-GNU General Public License for more details.
-
-You should have received a copy of the GNU General Public License
-along with this program. If not, see <http://www.gnu.org/licenses/>.
-*/
-
-#pragma once
-
-// wiring of each half
-#define MATRIX_COL_PINS { D4, C6, D7, E6, B4, B5 }
-#define MATRIX_ROW_PINS { F5, F6, F7, B1, B3, B2, B6 }
-
-#define DIODE_DIRECTION COL2ROW \ No newline at end of file
diff --git a/keyboards/handwired/dactyl_manuform/5x6_6/info.json b/keyboards/handwired/dactyl_manuform/5x6_6/info.json
index c81ac40fdb..9635c47123 100644
--- a/keyboards/handwired/dactyl_manuform/5x6_6/info.json
+++ b/keyboards/handwired/dactyl_manuform/5x6_6/info.json
@@ -8,6 +8,11 @@
"pid": "0x3536",
"device_version": "0.0.3"
},
+ "matrix_pins": {
+ "cols": ["D4", "C6", "D7", "E6", "B4", "B5"],
+ "rows": ["F5", "F6", "F7", "B1", "B3", "B2", "B6"]
+ },
+ "diode_direction": "COL2ROW",
"split": {
"soft_serial_pin": "D3"
},
diff --git a/keyboards/handwired/dactyl_manuform/5x7/config.h b/keyboards/handwired/dactyl_manuform/5x7/config.h
index 38e4b1ab4b..fbff478bed 100644
--- a/keyboards/handwired/dactyl_manuform/5x7/config.h
+++ b/keyboards/handwired/dactyl_manuform/5x7/config.h
@@ -18,13 +18,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
#pragma once
-
-// wiring of each half
-#define MATRIX_ROW_PINS { D4, C6, D7, E6, B4, B5 }
-#define MATRIX_COL_PINS { F5, F6, F7, B1, B3, B2, B6 }
-
-#define DIODE_DIRECTION COL2ROW
-
// WS2812 RGB LED strip input and number of LEDs
#define RGB_DI_PIN D3
#define RGBLED_NUM 12
diff --git a/keyboards/handwired/dactyl_manuform/5x7/info.json b/keyboards/handwired/dactyl_manuform/5x7/info.json
index 4eed5d53b4..6e3b62e218 100644
--- a/keyboards/handwired/dactyl_manuform/5x7/info.json
+++ b/keyboards/handwired/dactyl_manuform/5x7/info.json
@@ -8,6 +8,11 @@
"pid": "0x3537",
"device_version": "0.0.1"
},
+ "matrix_pins": {
+ "cols": ["F5", "F6", "F7", "B1", "B3", "B2", "B6"],
+ "rows": ["D4", "C6", "D7", "E6", "B4", "B5"]
+ },
+ "diode_direction": "COL2ROW",
"split": {
"soft_serial_pin": "D0"
},
diff --git a/keyboards/handwired/dactyl_manuform/6x6/blackpill_f411/config.h b/keyboards/handwired/dactyl_manuform/6x6/blackpill_f411/config.h
index 0f40ee28ac..9639d4ba1d 100644
--- a/keyboards/handwired/dactyl_manuform/6x6/blackpill_f411/config.h
+++ b/keyboards/handwired/dactyl_manuform/6x6/blackpill_f411/config.h
@@ -16,11 +16,6 @@
#pragma once
-#define MATRIX_ROW_PINS { B12, B13, B14, B15, A8 , A9, A10}
-#define MATRIX_COL_PINS { B1, B0, A7, A6, A5, A4}
-/* COL2ROW, ROW2COL */
-#define DIODE_DIRECTION COL2ROW
-
// in col2row col is input, and row is output
// #define SPLIT_HAND_MATRIX_GRID A10, A4
// 68kohm
diff --git a/keyboards/handwired/dactyl_manuform/6x6/blackpill_f411/info.json b/keyboards/handwired/dactyl_manuform/6x6/blackpill_f411/info.json
index f28579ba5f..0295176c25 100644
--- a/keyboards/handwired/dactyl_manuform/6x6/blackpill_f411/info.json
+++ b/keyboards/handwired/dactyl_manuform/6x6/blackpill_f411/info.json
@@ -1,4 +1,9 @@
{
+ "matrix_pins": {
+ "cols": ["B1", "B0", "A7", "A6", "A5", "A4"],
+ "rows": ["B12", "B13", "B14", "B15", "A8", "A9", "A10"]
+ },
+ "diode_direction": "COL2ROW",
"split": {
"bootmagic": {
"matrix": [7, 0]
diff --git a/keyboards/handwired/dactyl_manuform/6x6/promicro/config.h b/keyboards/handwired/dactyl_manuform/6x6/promicro/config.h
index d156461f59..85aee07d82 100644
--- a/keyboards/handwired/dactyl_manuform/6x6/promicro/config.h
+++ b/keyboards/handwired/dactyl_manuform/6x6/promicro/config.h
@@ -16,13 +16,6 @@
#pragma once
-
-// wiring of each half
-#define MATRIX_COL_PINS { D4, C6, D7, E6, B4, B5 }
-#define MATRIX_ROW_PINS { F5, F6, F7, B1, B3, B2, B6 }
-
-#define DIODE_DIRECTION COL2ROW
-
// WS2812 RGB LED strip input and number of LEDs
#define RGB_DI_PIN D3
#define RGBLED_NUM 12
diff --git a/keyboards/handwired/dactyl_manuform/6x6/promicro/info.json b/keyboards/handwired/dactyl_manuform/6x6/promicro/info.json
index 52523980a9..32c81a5f93 100644
--- a/keyboards/handwired/dactyl_manuform/6x6/promicro/info.json
+++ b/keyboards/handwired/dactyl_manuform/6x6/promicro/info.json
@@ -1,4 +1,9 @@
{
+ "matrix_pins": {
+ "cols": ["D4", "C6", "D7", "E6", "B4", "B5"],
+ "rows": ["F5", "F6", "F7", "B1", "B3", "B2", "B6"]
+ },
+ "diode_direction": "COL2ROW",
"split": {
"soft_serial_pin": "D0"
},
diff --git a/keyboards/handwired/dactyl_manuform/6x6_4/config.h b/keyboards/handwired/dactyl_manuform/6x6_4/config.h
index ebf41bd292..fbff478bed 100644
--- a/keyboards/handwired/dactyl_manuform/6x6_4/config.h
+++ b/keyboards/handwired/dactyl_manuform/6x6_4/config.h
@@ -18,13 +18,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
#pragma once
-
-// wiring of each half
-#define MATRIX_COL_PINS { D4, C6, D7, E6, B4, B5 }
-#define MATRIX_ROW_PINS { F5, F6, F7, B1, B3, B2, B6 }
-
-#define DIODE_DIRECTION COL2ROW
-
// WS2812 RGB LED strip input and number of LEDs
#define RGB_DI_PIN D3
#define RGBLED_NUM 12
diff --git a/keyboards/handwired/dactyl_manuform/6x6_4/info.json b/keyboards/handwired/dactyl_manuform/6x6_4/info.json
index 4e9b444163..b2da174b5a 100644
--- a/keyboards/handwired/dactyl_manuform/6x6_4/info.json
+++ b/keyboards/handwired/dactyl_manuform/6x6_4/info.json
@@ -8,6 +8,11 @@
"pid": "0x3636",
"device_version": "0.0.1"
},
+ "matrix_pins": {
+ "cols": ["D4", "C6", "D7", "E6", "B4", "B5"],
+ "rows": ["F5", "F6", "F7", "B1", "B3", "B2", "B6"]
+ },
+ "diode_direction": "COL2ROW",
"split": {
"soft_serial_pin": "D0"
},
diff --git a/keyboards/handwired/dactyl_manuform/6x6_kinesis/config.h b/keyboards/handwired/dactyl_manuform/6x6_kinesis/config.h
index ebf41bd292..fbff478bed 100644
--- a/keyboards/handwired/dactyl_manuform/6x6_kinesis/config.h
+++ b/keyboards/handwired/dactyl_manuform/6x6_kinesis/config.h
@@ -18,13 +18,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
#pragma once
-
-// wiring of each half
-#define MATRIX_COL_PINS { D4, C6, D7, E6, B4, B5 }
-#define MATRIX_ROW_PINS { F5, F6, F7, B1, B3, B2, B6 }
-
-#define DIODE_DIRECTION COL2ROW
-
// WS2812 RGB LED strip input and number of LEDs
#define RGB_DI_PIN D3
#define RGBLED_NUM 12
diff --git a/keyboards/handwired/dactyl_manuform/6x6_kinesis/info.json b/keyboards/handwired/dactyl_manuform/6x6_kinesis/info.json
index 6c929eb18c..190acc1848 100644
--- a/keyboards/handwired/dactyl_manuform/6x6_kinesis/info.json
+++ b/keyboards/handwired/dactyl_manuform/6x6_kinesis/info.json
@@ -8,6 +8,11 @@
"pid": "0x3636",
"device_version": "0.0.1"
},
+ "matrix_pins": {
+ "cols": ["D4", "C6", "D7", "E6", "B4", "B5"],
+ "rows": ["F5", "F6", "F7", "B1", "B3", "B2", "B6"]
+ },
+ "diode_direction": "COL2ROW",
"split": {
"soft_serial_pin": "D0"
},
diff --git a/keyboards/handwired/dactyl_manuform/6x7/config.h b/keyboards/handwired/dactyl_manuform/6x7/config.h
index 1cbf1f6545..fbff478bed 100644
--- a/keyboards/handwired/dactyl_manuform/6x7/config.h
+++ b/keyboards/handwired/dactyl_manuform/6x7/config.h
@@ -18,13 +18,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
#pragma once
-
-// wiring of each half
-#define MATRIX_COL_PINS { D4, C6, D7, E6, B4, B5, B7 }
-#define MATRIX_ROW_PINS { F5, F6, F7, B1, B3, B2, B6 }
-
-#define DIODE_DIRECTION COL2ROW
-
// WS2812 RGB LED strip input and number of LEDs
#define RGB_DI_PIN D3
#define RGBLED_NUM 12
diff --git a/keyboards/handwired/dactyl_manuform/6x7/info.json b/keyboards/handwired/dactyl_manuform/6x7/info.json
index b2ea65651e..5f774715a0 100644
--- a/keyboards/handwired/dactyl_manuform/6x7/info.json
+++ b/keyboards/handwired/dactyl_manuform/6x7/info.json
@@ -8,6 +8,11 @@
"pid": "0x3636",
"device_version": "0.0.1"
},
+ "matrix_pins": {
+ "cols": ["D4", "C6", "D7", "E6", "B4", "B5", "B7"],
+ "rows": ["F5", "F6", "F7", "B1", "B3", "B2", "B6"]
+ },
+ "diode_direction": "COL2ROW",
"split": {
"soft_serial_pin": "D0"
},
diff --git a/keyboards/handwired/dactyl_manuform/dmote/62key/config.h b/keyboards/handwired/dactyl_manuform/dmote/62key/config.h
index dd38c6af7d..c7f20b1103 100644
--- a/keyboards/handwired/dactyl_manuform/dmote/62key/config.h
+++ b/keyboards/handwired/dactyl_manuform/dmote/62key/config.h
@@ -1,39 +1,5 @@
#pragma once
-
-// MCUs are flipped on each side, relative to the shape of the case,
-// but for ease of mounting, the pinout is not flipped with the controller.
-// The same finger on each hand uses a column connected to the pin with the
-// same silk-screen label on each Pro Micro.
-
-// Pin use:
-//
-// MCU | Silk | DMOTE
-// -----+------+----------
-// D3 | TX0 |
-// D2 | RX1 |
-// D1 | 2 | LED strip input (dominant half only)
-// D0 | 3 | Serial interface between halves
-// D4 | 4 | Outermost pinky-finger column
-// C6 | 5 | Column
-// D7 | 6 | Column
-// E6 | 7 | Column
-// B4 | 8 | Column
-// B5 | 9 | Outermost index-finger column
-// -----+------+----------
-// F4 | A3 |
-// F5 | A2 |
-// F6 | A1 | Top row (furthest from user)
-// F7 | A0 | Row
-// B1 | 15 | Row
-// B3 | 14 | Row
-// B2 | 16 | Row
-// B6 | 10 | Bottom row (closest to user)
-#define MATRIX_ROW_PINS { F6, F7, B1, B3, B2, B6 }
-#define MATRIX_COL_PINS { D4, C6, D7, E6, B4, B5 }
-
-#define DIODE_DIRECTION COL2ROW
-
// WS2812 RGB LED, normally used to indicate keyboard state:
#define RGBLIGHT_EFFECT_KNIGHT
#define RGBLIGHT_EFFECT_KNIGHT_LENGTH 2
diff --git a/keyboards/handwired/dactyl_manuform/dmote/62key/info.json b/keyboards/handwired/dactyl_manuform/dmote/62key/info.json
index d26f06c45b..4e86c8b3a6 100644
--- a/keyboards/handwired/dactyl_manuform/dmote/62key/info.json
+++ b/keyboards/handwired/dactyl_manuform/dmote/62key/info.json
@@ -10,6 +10,11 @@
"pid": "0x3632",
"device_version": "0.0.1"
},
+ "matrix_pins": {
+ "cols": ["D4", "C6", "D7", "E6", "B4", "B5"],
+ "rows": ["F6", "F7", "B1", "B3", "B2", "B6"]
+ },
+ "diode_direction": "COL2ROW",
"split": {
"enabled": true,
"soft_serial_pin": "D0"
diff --git a/keyboards/handwired/dactyl_promicro/config.h b/keyboards/handwired/dactyl_promicro/config.h
index dc6f53955c..00548e339c 100644
--- a/keyboards/handwired/dactyl_promicro/config.h
+++ b/keyboards/handwired/dactyl_promicro/config.h
@@ -18,13 +18,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
#pragma once
-
-// wiring of each half
-#define MATRIX_COL_PINS { D4, C6, D7, E6, B4, B5 }
-#define MATRIX_ROW_PINS { F6, F7, B1, B3, B2, B6 }
-
-#define DIODE_DIRECTION COL2ROW
-
/* mouse config */
#define MOUSEKEY_INTERVAL 20
#define MOUSEKEY_DELAY 0
diff --git a/keyboards/handwired/dactyl_promicro/info.json b/keyboards/handwired/dactyl_promicro/info.json
index 51451dfcc1..48202d90cd 100644
--- a/keyboards/handwired/dactyl_promicro/info.json
+++ b/keyboards/handwired/dactyl_promicro/info.json
@@ -8,6 +8,11 @@
"pid": "0x3060",
"device_version": "0.0.1"
},
+ "matrix_pins": {
+ "cols": ["D4", "C6", "D7", "E6", "B4", "B5"],
+ "rows": ["F6", "F7", "B1", "B3", "B2", "B6"]
+ },
+ "diode_direction": "COL2ROW",
"split": {
"soft_serial_pin": "D0"
},
diff --git a/keyboards/handwired/dactyl_rah/config.h b/keyboards/handwired/dactyl_rah/config.h
index abe8240150..e40f6dfc69 100644
--- a/keyboards/handwired/dactyl_rah/config.h
+++ b/keyboards/handwired/dactyl_rah/config.h
@@ -17,13 +17,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
#pragma once
-
-// wiring of each half
-#define MATRIX_COL_PINS { D4, C6, D7, E6, B4, B5 }
-#define MATRIX_ROW_PINS { F6, F7, B1, B3, B2, B6 }
-
-#define DIODE_DIRECTION COL2ROW
-
/* mouse config */
#define MOUSEKEY_DELAY 0
// Lowering MOUSEKEY_INTERVAL raises the cursor speed significantly, you may want to lower MOUSEKEY_MAX_SPEED (default: 10)
diff --git a/keyboards/handwired/dactyl_rah/info.json b/keyboards/handwired/dactyl_rah/info.json
index bc21fcee0f..f683a05eda 100644
--- a/keyboards/handwired/dactyl_rah/info.json
+++ b/keyboards/handwired/dactyl_rah/info.json
@@ -8,6 +8,11 @@
"pid": "0x3060",
"device_version": "0.0.1"
},
+ "matrix_pins": {
+ "cols": ["D4", "C6", "D7", "E6", "B4", "B5"],
+ "rows": ["F6", "F7", "B1", "B3", "B2", "B6"]
+ },
+ "diode_direction": "COL2ROW",
"split": {
"soft_serial_pin": "D0"
},
diff --git a/keyboards/handwired/daishi/config.h b/keyboards/handwired/daishi/config.h
index 1fefa56fc6..2e6498ab5d 100644
--- a/keyboards/handwired/daishi/config.h
+++ b/keyboards/handwired/daishi/config.h
@@ -17,22 +17,5 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
#pragma once
-
-/*
- * Keyboard Matrix Assignments
- *
- * Change this to how you wired your keyboard
- * COLS: AVR pins used for columns, left to right
- * ROWS: AVR pins used for rows, top to bottom
- * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
- * ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
- *
-*/
-#define MATRIX_ROW_PINS { D6, D7, E0, E1, C0, C1, C2 }
-#define MATRIX_COL_PINS { E6, E7, E3, B0, B1, B2, A6, A5, A4, A3, A2, A1, A0, F7, F6, F5, F4, F3 }
-
-/* COL2ROW, ROW2COL */
-#define DIODE_DIRECTION COL2ROW
-
/* Set delay for tap_code on rotary encoder */
#define TAP_CODE_DELAY 10
diff --git a/keyboards/handwired/daishi/info.json b/keyboards/handwired/daishi/info.json
index 27671cc28a..7bd1c6dd8d 100644
--- a/keyboards/handwired/daishi/info.json
+++ b/keyboards/handwired/daishi/info.json
@@ -8,6 +8,11 @@
"pid": "0x0001",
"device_version": "0.0.1"
},
+ "matrix_pins": {
+ "cols": ["E6", "E7", "E3", "B0", "B1", "B2", "A6", "A5", "A4", "A3", "A2", "A1", "A0", "F7", "F6", "F5", "F4", "F3"],
+ "rows": ["D6", "D7", "E0", "E1", "C0", "C1", "C2"]
+ },
+ "diode_direction": "COL2ROW",
"encoder": {
"rotary": [
{"pin_a": "F1", "pin_b": "F0", "resolution": 2}
diff --git a/keyboards/handwired/ddg_56/config.h b/keyboards/handwired/ddg_56/config.h
deleted file mode 100644
index e46edef395..0000000000
--- a/keyboards/handwired/ddg_56/config.h
+++ /dev/null
@@ -1,21 +0,0 @@
-/* Copyright 2019 Spaceman
- *
- * This program is free software: you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation, either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program. If not, see <http://www.gnu.org/licenses/>.
- */
-#pragma once
-
-#define DIODE_DIRECTION COL2ROW
-
-#define MATRIX_ROW_PINS { B5, B15, B9, B10, A14 }
-#define MATRIX_COL_PINS { A2, B8, B13, B14, B4, B11, B12, A13, A15, A8, A7, A6, B0, B1 }
diff --git a/keyboards/handwired/ddg_56/info.json b/keyboards/handwired/ddg_56/info.json
index f7253711e4..a6407d262d 100644
--- a/keyboards/handwired/ddg_56/info.json
+++ b/keyboards/handwired/ddg_56/info.json
@@ -8,6 +8,11 @@
"pid": "0xB195",
"device_version": "0.0.1"
},
+ "matrix_pins": {
+ "cols": ["A2", "B8", "B13", "B14", "B4", "B11", "B12", "A13", "A15", "A8", "A7", "A6", "B0", "B1"],
+ "rows": ["B5", "B15", "B9", "B10", "A14"]
+ },
+ "diode_direction": "COL2ROW",
"encoder": {
"rotary": [
{"pin_a": "A1", "pin_b": "A0"},
diff --git a/keyboards/handwired/eagleii/config.h b/keyboards/handwired/eagleii/config.h
deleted file mode 100644
index 7ebd3a4a8c..0000000000
--- a/keyboards/handwired/eagleii/config.h
+++ /dev/null
@@ -1,6 +0,0 @@
-#pragma once
-
-
-#define MATRIX_ROW_PINS { D0, B5, F1, B2, F7, F6, D4, D7, B4, B7, F5, B0 }
-#define MATRIX_COL_PINS { D2, C6, E6, D5, B3, D3, D1, C7, F0, B6, B1, F4 }
-#define DIODE_DIRECTION COL2ROW
diff --git a/keyboards/handwired/eagleii/info.json b/keyboards/handwired/eagleii/info.json
index 23730b8af6..e84808c71d 100644
--- a/keyboards/handwired/eagleii/info.json
+++ b/keyboards/handwired/eagleii/info.json
@@ -8,6 +8,11 @@
"pid": "0x9789",
"device_version": "0.0.1"
},
+ "matrix_pins": {
+ "cols": ["D2", "C6", "E6", "D5", "B3", "D3", "D1", "C7", "F0", "B6", "B1", "F4"],
+ "rows": ["D0", "B5", "F1", "B2", "F7", "F6", "D4", "D7", "B4", "B7", "F5", "B0"]
+ },
+ "diode_direction": "COL2ROW",
"processor": "atmega32u4",
"bootloader": "atmel-dfu",
"layouts": {
diff --git a/keyboards/handwired/elrgo_s/config.h b/keyboards/handwired/elrgo_s/config.h
deleted file mode 100644
index 40b3f759d8..0000000000
--- a/keyboards/handwired/elrgo_s/config.h
+++ /dev/null
@@ -1,37 +0,0 @@
-/*
-Copyright 2021 Yaroslav Smirnov <elorenn@bk.ru>
- *
- * This program is free software: you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation, either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program. If not, see <http://www.gnu.org/licenses/>.
- */
-
-#pragma once
-
-
-// Wiring of each half
-#define MATRIX_ROW_PINS { B1, B3, B2, B6 }
-#define MATRIX_COL_PINS { D4, C6, D7, E6, B4, B5 }
-// Reversed sort
-
-#define DIODE_DIRECTION COL2ROW
-
-/* disable debug print */
-// #define NO_DEBUG
-
-/* disable print */
-// #define NO_PRINT
-
-/* disable action features */
-//#define NO_ACTION_LAYER
-//#define NO_ACTION_TAPPING
-//#define NO_ACTION_ONESHOT
diff --git a/keyboards/handwired/elrgo_s/info.json b/keyboards/handwired/elrgo_s/info.json
index 33e3c7566c..ba850bb5d4 100644
--- a/keyboards/handwired/elrgo_s/info.json
+++ b/keyboards/handwired/elrgo_s/info.json
@@ -8,6 +8,11 @@
"pid": "0x3436",
"device_version": "0.0.1"
},
+ "matrix_pins": {
+ "cols": ["D4", "C6", "D7", "E6", "B4", "B5"],
+ "rows": ["B1", "B3", "B2", "B6"]
+ },
+ "diode_direction": "COL2ROW",
"split": {
"soft_serial_pin": "D0"
},
diff --git a/keyboards/handwired/ergocheap/config.h b/keyboards/handwired/ergocheap/config.h
index 61946adcd2..4458922746 100644
--- a/keyboards/handwired/ergocheap/config.h
+++ b/keyboards/handwired/ergocheap/config.h
@@ -17,11 +17,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
#pragma once
-#define MATRIX_COL_PINS { A8, A9, B14, B12, B13, B15, B3, B11, A4, A5, A6, A7, B0, B1, B10 }
-#define MATRIX_ROW_PINS { B5, B6, B7, B9, B8 }
-
-#define DIODE_DIRECTION COL2ROW
-
#define TAPPING_TERM 500
#define PERMISSIVE_HOLD
diff --git a/keyboards/handwired/ergocheap/info.json b/keyboards/handwired/ergocheap/info.json
index 959a4299f5..097a4e6278 100644
--- a/keyboards/handwired/ergocheap/info.json
+++ b/keyboards/handwired/ergocheap/info.json
@@ -8,6 +8,11 @@
"pid": "0x6942",
"device_version": "0.0.1"
},
+ "matrix_pins": {
+ "cols": ["A8", "A9", "B14", "B12", "B13", "B15", "B3", "B11", "A4", "A5", "A6", "A7", "B0", "B1", "B10"],
+ "rows": ["B5", "B6", "B7", "B9", "B8"]
+ },
+ "diode_direction": "COL2ROW",
"processor": "STM32F103",
"bootloader": "stm32duino",
"layouts": {
diff --git a/keyboards/handwired/evk/v1_3/config.h b/keyboards/handwired/evk/v1_3/config.h
index a43abb351a..1b4e5a6d87 100644
--- a/keyboards/handwired/evk/v1_3/config.h
+++ b/keyboards/handwired/evk/v1_3/config.h
@@ -15,25 +15,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
#pragma once
-
-/*
- * Keyboard Matrix Assignments
- *
- * Change this to how you wired your keyboard
- * COLS: AVR pins used for columns, left to right
- * ROWS: AVR pins used for rows, top to bottom
- * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
- * ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
- *
- */
-#define MATRIX_ROW_PINS \
- { B0, B1, B2, B3, B7, D0 }
-#define MATRIX_COL_PINS \
- { D1, D2, D3, C6, C7, F0, F1, F4, F5, F6, F7, B6, B5, B4, D7, D6 }
-
-/* COL2ROW, ROW2COL*/
-#define DIODE_DIRECTION ROW2COL // the positive current flows into the rows and then out of the columns negative.
-
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
#define LOCKING_SUPPORT_ENABLE
/* Locking resynchronize hack */
diff --git a/keyboards/handwired/evk/v1_3/info.json b/keyboards/handwired/evk/v1_3/info.json
index bc6a522003..10564bb2a7 100644
--- a/keyboards/handwired/evk/v1_3/info.json
+++ b/keyboards/handwired/evk/v1_3/info.json
@@ -8,6 +8,11 @@
"pid": "0x0000",
"device_version": "0.0.1"
},
+ "matrix_pins": {
+ "cols": ["D1", "D2", "D3", "C6", "C7", "F0", "F1", "F4", "F5", "F6", "F7", "B6", "B5", "B4", "D7", "D6"],
+ "rows": ["B0", "B1", "B2", "B3", "B7", "D0"]
+ },
+ "diode_direction": "ROW2COL",
"indicators": {
"caps_lock": "D4"
},
diff --git a/keyboards/handwired/fc200rt_qmk/config.h b/keyboards/handwired/fc200rt_qmk/config.h
index 055c910e8b..82fe0166b2 100644
--- a/keyboards/handwired/fc200rt_qmk/config.h
+++ b/keyboards/handwired/fc200rt_qmk/config.h
@@ -17,13 +17,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
#pragma once
-
-#define MATRIX_ROW_PINS { B0, B1, B2, B3, E6, B7, D0, D1 }
-#define MATRIX_COL_PINS { D2, D3, C6, C7, D5, D4, D6, D7, B4, B5, B6, F7, F6, F5, F4, F1 }
-
-/* COL2ROW, ROW2COL*/
-#define DIODE_DIRECTION ROW2COL
-
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
#define LOCKING_SUPPORT_ENABLE
/* Locking resynchronize hack */
diff --git a/keyboards/handwired/fc200rt_qmk/info.json b/keyboards/handwired/fc200rt_qmk/info.json
index ebbd75ee7e..395b42bcc8 100644
--- a/keyboards/handwired/fc200rt_qmk/info.json
+++ b/keyboards/handwired/fc200rt_qmk/info.json
@@ -8,6 +8,11 @@
"pid": "0xFFFF",
"device_version": "0.0.1"
},
+ "matrix_pins": {
+ "cols": ["D2", "D3", "C6", "C7", "D5", "D4", "D6", "D7", "B4", "B5", "B6", "F7", "F6", "F5", "F4", "F1"],
+ "rows": ["B0", "B1", "B2", "B3", "E6", "B7", "D0", "D1"]
+ },
+ "diode_direction": "ROW2COL",
"processor": "atmega32u4",
"bootloader": "halfkay",
"layouts": {
diff --git a/keyboards/handwired/fivethirteen/config.h b/keyboards/handwired/fivethirteen/config.h
index 5f5fef769b..b9449c4714 100644
--- a/keyboards/handwired/fivethirteen/config.h
+++ b/keyboards/handwired/fivethirteen/config.h
@@ -17,23 +17,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
#pragma once
-
-/*
- * Keyboard Matrix Assignments
- *
- * Change this to how you wired your keyboard
- * COLS: AVR pins used for columns, left to right
- * ROWS: AVR pins used for rows, top to bottom
- * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
- * ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
- *
-*/
-#define MATRIX_ROW_PINS { F6, F7, B6, B5, B4 }
-#define MATRIX_COL_PINS { B0, B1, B2, B3, F0, D0, D1, D2, D3, C6, C7, D6, D7 }
-
-/* COL2ROW or ROW2COL */
-#define DIODE_DIRECTION COL2ROW
-
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
#define LOCKING_SUPPORT_ENABLE
/* Locking resynchronize hack */
diff --git a/keyboards/handwired/fivethirteen/info.json b/keyboards/handwired/fivethirteen/info.json
index 0a23ba02a2..66e51571e2 100644
--- a/keyboards/handwired/fivethirteen/info.json
+++ b/keyboards/handwired/fivethirteen/info.json
@@ -8,6 +8,11 @@
"pid": "0x6060",
"device_version": "0.0.1"
},
+ "matrix_pins": {
+ "cols": ["B0", "B1", "B2", "B3", "F0", "D0", "D1", "D2", "D3", "C6", "C7", "D6", "D7"],
+ "rows": ["F6", "F7", "B6", "B5", "B4"]
+ },
+ "diode_direction": "COL2ROW",
"processor": "atmega32u4",
"bootloader": "halfkay",
"layouts": {
diff --git a/keyboards/handwired/floorboard/config.h b/keyboards/handwired/floorboard/config.h
index cb020114b2..af56b8a7fe 100644
--- a/keyboards/handwired/floorboard/config.h
+++ b/keyboards/handwired/floorboard/config.h
@@ -17,23 +17,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
#pragma once
-
-/*
- * Keyboard Matrix Assignments
- *
- * Change this to how you wired your keyboard
- * COLS: AVR pins used for columns, left to right
- * ROWS: AVR pins used for rows, top to bottom
- * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
- * ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
- *
- */
-#define MATRIX_ROW_PINS { A2, A1, A0, B8 }
-#define MATRIX_COL_PINS { B7, B6, B5, B4, B3, B2, B1, B9, B0, B15, B14, B13 }
-
-/* COL2ROW, ROW2COL*/
-#define DIODE_DIRECTION COL2ROW
-
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
#define LOCKING_SUPPORT_ENABLE
/* Locking resynchronize hack */
diff --git a/keyboards/handwired/floorboard/info.json b/keyboards/handwired/floorboard/info.json
index 226041e40d..b56a6309fe 100644
--- a/keyboards/handwired/floorboard/info.json
+++ b/keyboards/handwired/floorboard/info.json
@@ -8,6 +8,11 @@
"pid": "0x0000",
"device_version": "0.0.1"
},
+ "matrix_pins": {
+ "cols": ["B7", "B6", "B5", "B4", "B3", "B2", "B1", "B9", "B0", "B15", "B14", "B13"],
+ "rows": ["A2", "A1", "A0", "B8"]
+ },
+ "diode_direction": "COL2ROW",
"processor": "STM32F303",
"bootloader": "stm32-dfu",
"board": "QMK_PROTON_C",
diff --git a/keyboards/handwired/frankie_macropad/config.h b/keyboards/handwired/frankie_macropad/config.h
index 577b27b372..fb1f9c3715 100644
--- a/keyboards/handwired/frankie_macropad/config.h
+++ b/keyboards/handwired/frankie_macropad/config.h
@@ -17,23 +17,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
#pragma once
-
-/*
- * Keyboard Matrix Assignments
- *
- * Change this to how you wired your keyboard
- * COLS: AVR pins used for columns, left to right
- * ROWS: AVR pins used for rows, top to bottom
- * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
- * ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
- *
- */
-#define MATRIX_ROW_PINS { B0, B1, B2 }
-#define MATRIX_COL_PINS { B3, B4, B5, B6 }
-
-/* COL2ROW, ROW2COL */
-#define DIODE_DIRECTION COL2ROW
-
/*
* Feature disable options
* These options are also useful to firmware size reduction.
diff --git a/keyboards/handwired/frankie_macropad/info.json b/keyboards/handwired/frankie_macropad/info.json
index 24fb55f5da..3416222269 100644
--- a/keyboards/handwired/frankie_macropad/info.json
+++ b/keyboards/handwired/frankie_macropad/info.json
@@ -8,6 +8,11 @@
"pid": "0x0000",
"device_version": "0.0.1"
},
+ "matrix_pins": {
+ "cols": ["B3", "B4", "B5", "B6"],
+ "rows": ["B0", "B1", "B2"]
+ },
+ "diode_direction": "COL2ROW",
"encoder": {
"rotary": [
{"pin_a": "D0", "pin_b": "D1"},
diff --git a/keyboards/handwired/freoduo/config.h b/keyboards/handwired/freoduo/config.h
index 56a55afd7c..16acada5e7 100644
--- a/keyboards/handwired/freoduo/config.h
+++ b/keyboards/handwired/freoduo/config.h
@@ -15,15 +15,8 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
#pragma once
-
-/* wiring of each half */
-#define MATRIX_ROW_PINS { C6, D7, E6, B4, B5 }
-#define MATRIX_COL_PINS { B2, B6, F6, B3, B1, F7 }
#define EE_HANDS
-/* COL2ROW or ROW2COL */
-#define DIODE_DIRECTION COL2ROW
-
/* ws2812 RGB LED */
#define RGB_DI_PIN D4
#if !defined(RGBLED_NUM)
diff --git a/keyboards/handwired/freoduo/info.json b/keyboards/handwired/freoduo/info.json
index 12024a8c90..aaa5a77193 100644
--- a/keyboards/handwired/freoduo/info.json
+++ b/keyboards/handwired/freoduo/info.json
@@ -8,6 +8,11 @@
"pid": "0x0602",
"device_version": "0.0.1"
},
+"matrix_pins": {
+ "cols": ["B2", "B6", "F6", "B3", "B1", "F7"],
+ "rows": ["C6", "D7", "E6", "B4", "B5"]
+},
+"diode_direction": "COL2ROW",
"split": {
"soft_serial_pin": "D0"
},
diff --git a/keyboards/handwired/fruity60/config.h b/keyboards/handwired/fruity60/config.h
index c325baca18..091cb7b510 100644
--- a/keyboards/handwired/fruity60/config.h
+++ b/keyboards/handwired/fruity60/config.h
@@ -17,15 +17,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
#pragma once
-
-#define MATRIX_ROW_PINS \
- { B6, B5, D7, C6, D0, D1 }
-#define MATRIX_COL_PINS \
- { F7, F6, F5, F4, F1, F0, D2, D3, B7, D6, C7 }
-
-/* COL2ROW, ROW2COL*/
-#define DIODE_DIRECTION COL2ROW
-
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
#define LOCKING_SUPPORT_ENABLE
/* Locking resynchronize hack */
diff --git a/keyboards/handwired/fruity60/info.json b/keyboards/handwired/fruity60/info.json
index 0cffe5b5b2..fdfc177264 100644
--- a/keyboards/handwired/fruity60/info.json
+++ b/keyboards/handwired/fruity60/info.json
@@ -8,6 +8,11 @@
"pid": "0xB170",
"device_version": "0.0.1"
},
+ "matrix_pins": {
+ "cols": ["F7", "F6", "F5", "F4", "F1", "F0", "D2", "D3", "B7", "D6", "C7"],
+ "rows": ["B6", "B5", "D7", "C6", "D0", "D1"]
+ },
+ "diode_direction": "COL2ROW",
"processor": "atmega32u4",
"bootloader": "caterina",
"community_layouts": ["60_tsangan_hhkb"],
diff --git a/keyboards/handwired/gamenum/config.h b/keyboards/handwired/gamenum/config.h
index 95477b88f0..b9449c4714 100644
--- a/keyboards/handwired/gamenum/config.h
+++ b/keyboards/handwired/gamenum/config.h
@@ -17,23 +17,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
#pragma once
-
-/*
- * Keyboard Matrix Assignments
- *
- * Change this to how you wired your keyboard
- * COLS: AVR pins used for columns, left to right
- * ROWS: AVR pins used for rows, top to bottom
- * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
- * ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
- *
-*/
-#define MATRIX_ROW_PINS { B6, B2, B3, B1, F7 }
-#define MATRIX_COL_PINS { D7, E6, B4, B5 }
-
-/* COL2ROW or ROW2COL */
-#define DIODE_DIRECTION ROW2COL
-
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
#define LOCKING_SUPPORT_ENABLE
/* Locking resynchronize hack */
diff --git a/keyboards/handwired/gamenum/info.json b/keyboards/handwired/gamenum/info.json
index daf77d1784..e35fb4a4e5 100644
--- a/keyboards/handwired/gamenum/info.json
+++ b/keyboards/handwired/gamenum/info.json
@@ -8,6 +8,11 @@
"pid": "0x5678",
"device_version": "0.0.1"
},
+ "matrix_pins": {
+ "cols": ["D7", "E6", "B4", "B5"],
+ "rows": ["B6", "B2", "B3", "B1", "F7"]
+ },
+ "diode_direction": "ROW2COL",
"processor": "atmega32u4",
"bootloader": "caterina",
"layouts": {
diff --git a/keyboards/handwired/hacked_motospeed/config.h b/keyboards/handwired/hacked_motospeed/config.h
index 2f3caa2b2f..f968fcc0d7 100644
--- a/keyboards/handwired/hacked_motospeed/config.h
+++ b/keyboards/handwired/hacked_motospeed/config.h
@@ -17,27 +17,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
#pragma once
-
-/*
- * Keyboard Matrix Assignments
- *
- * Change this to how you wired your keyboard
- * COLS: AVR pins used for columns, left to right
- * ROWS: AVR pins used for rows, top to bottom
- * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
- * ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
- *
-*/
-
-// WR XR YR ZR VR ZL YL XL WL VL
-#define MATRIX_ROW_PINS { B3, B4, F1, B5, B6, D5, D4, D6, D7, C4}
-
-// ER DR CR BR AR FR FL AL BL CL DL EL
-#define MATRIX_COL_PINS { F7, F6, F5, F4, F3, F2, E0, E1, C0, C1, C2, C3 }
-
-/* COL2ROW, ROW2COL*/
-#define DIODE_DIRECTION COL2ROW
-
/* define if matrix has ghost (lacks anti-ghosting diodes) */
#define MATRIX_HAS_GHOST
diff --git a/keyboards/handwired/hacked_motospeed/info.json b/keyboards/handwired/hacked_motospeed/info.json
index 57b66e3bdf..c64931a74b 100644
--- a/keyboards/handwired/hacked_motospeed/info.json
+++ b/keyboards/handwired/hacked_motospeed/info.json
@@ -8,6 +8,11 @@
"pid": "0x0690",
"device_version": "0.0.1"
},
+ "matrix_pins": {
+ "cols": ["F7", "F6", "F5", "F4", "F3", "F2", "E0", "E1", "C0", "C1", "C2", "C3"],
+ "rows": ["B3", "B4", "F1", "B5", "B6", "D5", "D4", "D6", "D7", "C4"]
+ },
+ "diode_direction": "COL2ROW",
"backlight": {
"pin": "B7"
},
diff --git a/keyboards/handwired/heisenberg/config.h b/keyboards/handwired/heisenberg/config.h
index 0051981fc1..ced4a9b4e5 100644
--- a/keyboards/handwired/heisenberg/config.h
+++ b/keyboards/handwired/heisenberg/config.h
@@ -17,25 +17,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
#pragma once
-
-/*
- * Keyboard Matrix Assignments
- *
- * Change this to how you wired your keyboard
- * COLS: AVR pins used for columns, left to right
- * ROWS: AVR pins used for rows, top to bottom
- * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
- * ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
- *
- */
-#define MATRIX_ROW_PINS \
- { D3, D2, D1, D0 }
-#define MATRIX_COL_PINS \
- { C6, D7, E6, B4, B6, B2, B3, B1, F7, F6, F5, F4 }
-
-/* COL2ROW, ROW2COL*/
-#define DIODE_DIRECTION COL2ROW
-
#define RGB_DI_PIN D4
#ifdef RGB_DI_PIN
#define RGBLED_NUM 6
diff --git a/keyboards/handwired/heisenberg/info.json b/keyboards/handwired/heisenberg/info.json
index 2ad37b00c6..a839fe711b 100644
--- a/keyboards/handwired/heisenberg/info.json
+++ b/keyboards/handwired/heisenberg/info.json
@@ -8,6 +8,11 @@
"pid": "0x0000",
"device_version": "0.0.1"
},
+ "matrix_pins": {
+ "cols": ["C6", "D7", "E6", "B4", "B6", "B2", "B3", "B1", "F7", "F6", "F5", "F4"],
+ "rows": ["D3", "D2", "D1", "D0"]
+ },
+ "diode_direction": "COL2ROW",
"processor": "atmega32u4",
"bootloader": "caterina",
"community_layouts": ["planck_mit"],
diff --git a/keyboards/handwired/hexon38/config.h b/keyboards/handwired/hexon38/config.h
index 5a75dff220..599f001661 100644
--- a/keyboards/handwired/hexon38/config.h
+++ b/keyboards/handwired/hexon38/config.h
@@ -2,14 +2,6 @@
#pragma once
-
-/* key matrix pins */
-#define MATRIX_ROW_PINS { B0, F0, B2, F4 }
-#define MATRIX_COL_PINS { C6, D3, D2, D1, D0, B7, F6, F7, B6, B5, B4, D7 }
-
-/* COL2ROW or ROW2COL */
-#define DIODE_DIRECTION ROW2COL
-
#ifdef RGB_DI_PIN
#define RGBLIGHT_EFFECT_BREATHING
#define RGBLIGHT_EFFECT_RAINBOW_MOOD
diff --git a/keyboards/handwired/hexon38/info.json b/keyboards/handwired/hexon38/info.json
index a0ea12aae5..2f22eeeaf8 100644
--- a/keyboards/handwired/hexon38/info.json
+++ b/keyboards/handwired/hexon38/info.json
@@ -8,6 +8,11 @@
"pid": "0x6060",
"device_version": "0.0.1"
},
+ "matrix_pins": {
+ "cols": ["C6", "D3", "D2", "D1", "D0", "B7", "F6", "F7", "B6", "B5", "B4", "D7"],
+ "rows": ["B0", "F0", "B2", "F4"]
+ },
+ "diode_direction": "ROW2COL",
"processor": "atmega32u4",
"bootloader": "halfkay",
"layouts": {
diff --git a/keyboards/handwired/hnah108/config.h b/keyboards/handwired/hnah108/config.h
index 2face5fbed..875f441b12 100644
--- a/keyboards/handwired/hnah108/config.h
+++ b/keyboards/handwired/hnah108/config.h
@@ -17,23 +17,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
#pragma once
-
-/*
- * Keyboard Matrix Assignments
- *
- * Change this to how you wired your keyboard
- * COLS: AVR pins used for columns, left to right
- * ROWS: AVR pins used for rows, top to bottom
- * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
- * ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
- *
- */
-#define MATRIX_ROW_PINS { F7, F6, F5, F4, F1, C7, B4, B5, B6, C6 }
-#define MATRIX_COL_PINS { F0, E6, B0, D0, D1, D2, D3, D5, D4, D6, D7 }
-
-/* COL2ROW, ROW2COL */
-#define DIODE_DIRECTION COL2ROW
-
#define RGB_DI_PIN E2
#define RGB_MATRIX_LED_COUNT 30
// RGB Matrix Animation modes. Explicitly enabled
diff --git a/keyboards/handwired/hnah108/info.json b/keyboards/handwired/hnah108/info.json
index 116591fddf..e18dc6c09d 100644
--- a/keyboards/handwired/hnah108/info.json
+++ b/keyboards/handwired/hnah108/info.json
@@ -8,6 +8,11 @@
"pid": "0x0000",
"device_version": "0.0.2"
},
+ "matrix_pins": {
+ "cols": ["F0", "E6", "B0", "D0", "D1", "D2", "D3", "D5", "D4", "D6", "D7"],
+ "rows": ["F7", "F6", "F5", "F4", "F1", "C7", "B4", "B5", "B6", "C6"]
+ },
+ "diode_direction": "COL2ROW",
"encoder": {
"rotary": [
{"pin_a": "B2", "pin_b": "B3"}
diff --git a/keyboards/handwired/hnah40/config.h b/keyboards/handwired/hnah40/config.h
index 083450a743..3ebccf9ad2 100644
--- a/keyboards/handwired/hnah40/config.h
+++ b/keyboards/handwired/hnah40/config.h
@@ -16,26 +16,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
#pragma once
-
-/*
- * Keyboard Matrix Assignments
- *
- * Change this to how you wired your keyboard
- * COLS: AVR pins used for columns, left to right
- * ROWS: AVR pins used for rows, top to bottom
- * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
- * ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
- *
-*/
-#define MATRIX_ROW_PINS { B4, B5, B3, D4 }
-#define MATRIX_COL_PINS { B0, D7, D6, D5, B2, B1, C0, C1, C2, C3, D1 }
-
-/* COL2ROW, ROW2COL*/
-#define DIODE_DIRECTION COL2ROW
-
-/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
-#define DEBOUNCING 5
-
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
#define LOCKING_SUPPORT_ENABLE
/* Locking resynchronize hack */
diff --git a/keyboards/handwired/hnah40/info.json b/keyboards/handwired/hnah40/info.json
index d01cdbd00d..cd94929ea1 100644
--- a/keyboards/handwired/hnah40/info.json
+++ b/keyboards/handwired/hnah40/info.json
@@ -8,6 +8,11 @@
"pid": "0x0000",
"device_version": "0.0.2"
},
+ "matrix_pins": {
+ "cols": ["B0", "D7", "D6", "D5", "B2", "B1", "C0", "C1", "C2", "C3", "D1"],
+ "rows": ["B4", "B5", "B3", "D4"]
+ },
+ "diode_direction": "COL2ROW",
"processor": "atmega328p",
"bootloader": "usbasploader",
"layouts": {
diff --git a/keyboards/handwired/hnah40rgb/config.h b/keyboards/handwired/hnah40rgb/config.h
index d4cf391b6d..c964590d80 100644
--- a/keyboards/handwired/hnah40rgb/config.h
+++ b/keyboards/handwired/hnah40rgb/config.h
@@ -17,25 +17,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
#pragma once
-
-/*
- * Keyboard Matrix Assignments
- *
- * Change this to how you wired your keyboard
- * COLS: AVR pins used for columns, left to right
- * ROWS: AVR pins used for rows, top to bottom
- * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
- * ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
- *
- */
-#define MATRIX_ROW_PINS \
- { B7, D7, F1, F0 }
-#define MATRIX_COL_PINS \
- { D5, D6, D3, D2, B6, C6, C7, F7, F6, F5, F4 }
-
-/* COL2ROW, ROW2COL*/
-#define DIODE_DIRECTION COL2ROW
-
#ifdef RGB_MATRIX_ENABLE
#define RGB_DI_PIN E2
#define RGB_MATRIX_LED_COUNT 50
diff --git a/keyboards/handwired/hnah40rgb/info.json b/keyboards/handwired/hnah40rgb/info.json
index b1fe1f8479..743a0bbecd 100644
--- a/keyboards/handwired/hnah40rgb/info.json
+++ b/keyboards/handwired/hnah40rgb/info.json
@@ -8,6 +8,11 @@
"pid": "0x0000",
"device_version": "0.0.1"
},
+ "matrix_pins": {
+ "cols": ["D5", "D6", "D3", "D2", "B6", "C6", "C7", "F7", "F6", "F5", "F4"],
+ "rows": ["B7", "D7", "F1", "F0"]
+ },
+ "diode_direction": "COL2ROW",
"processor": "atmega32u4",
"bootloader": "atmel-dfu",
"layouts": {
diff --git a/keyboards/handwired/hwpm87/config.h b/keyboards/handwired/hwpm87/config.h
deleted file mode 100644
index 427c62a66b..0000000000
--- a/keyboards/handwired/hwpm87/config.h
+++ /dev/null
@@ -1,20 +0,0 @@
-// Copyright 2022 CAO THAI DUONG (@KD-MM2)
-// SPDX-License-Identifier: GPL-2.0-or-later
-
-#pragma once
-
-
-/*
- * Keyboard Matrix Assignments
- *
- * Change this to how you wired your keyboard
- * COLS: AVR pins used for columns, left to right
- * ROWS: AVR pins used for rows, top to bottom
- * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
- * ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
- *
- */
-#define DIODE_DIRECTION ROW2COL
-
-#define MATRIX_ROW_PINS { B0, B1, B2, B3, B4, B5 }
-#define MATRIX_COL_PINS { D3, D2, D1, D0, D4, C6, D7, E6, B7, F0, F1, D6, C7, B6, F7, F6, F5, F4 }
diff --git a/keyboards/handwired/hwpm87/info.json b/keyboards/handwired/hwpm87/info.json
index 8654ea7561..a719ba5ef2 100644
--- a/keyboards/handwired/hwpm87/info.json
+++ b/keyboards/handwired/hwpm87/info.json
@@ -8,6 +8,11 @@
"pid": "0x0001",
"device_version": "0.0.1"
},
+ "matrix_pins": {
+ "cols": ["D3", "D2", "D1", "D0", "D4", "C6", "D7", "E6", "B7", "F0", "F1", "D6", "C7", "B6", "F7", "F6", "F5", "F4"],
+ "rows": ["B0", "B1", "B2", "B3", "B4", "B5"]
+ },
+ "diode_direction": "ROW2COL",
"indicators": {
"caps_lock": "D5",
"on_state": 0
diff --git a/keyboards/handwired/ibm122m/config.h b/keyboards/handwired/ibm122m/config.h
index e8ca31777e..af3de54eb2 100644
--- a/keyboards/handwired/ibm122m/config.h
+++ b/keyboards/handwired/ibm122m/config.h
@@ -17,23 +17,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
#pragma once
-
-/*
- * Keyboard Matrix Assignments
- *
- * Change this to how you wired your keyboard
- * COLS: AVR pins used for columns, left to right
- * ROWS: AVR pins used for rows, top to bottom
- * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
- * ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
- *
-*/
-#define MATRIX_COL_PINS { E6, B7, D0, D1, D2, D3, D4, D5, D6, D7, E0, E1, C0, C1, C2, C3, C4, C5, C7, F1 }
-#define MATRIX_ROW_PINS { F0, B5, B4, B3, B2, B1, B0, E7 }
-
-/* COL2ROW, ROW2COL*/
-#define DIODE_DIRECTION ROW2COL
-
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
#define LOCKING_SUPPORT_ENABLE
/* Locking resynchronize hack */
diff --git a/keyboards/handwired/ibm122m/info.json b/keyboards/handwired/ibm122m/info.json
index aa423f0ece..6a157a8031 100644
--- a/keyboards/handwired/ibm122m/info.json
+++ b/keyboards/handwired/ibm122m/info.json
@@ -7,6 +7,11 @@
"pid": "0x0000",
"device_version": "0.0.1"
},
+ "matrix_pins": {
+ "cols": ["E6", "B7", "D0", "D1", "D2", "D3", "D4", "D5", "D6", "D7", "E0", "E1", "C0", "C1", "C2", "C3", "C4", "C5", "C7", "F1"],
+ "rows": ["F0", "B5", "B4", "B3", "B2", "B1", "B0", "E7"]
+ },
+ "diode_direction": "ROW2COL",
"processor": "at90usb1286",
"bootloader": "halfkay",
"debounce": 15,
diff --git a/keyboards/handwired/ibm_wheelwriter/config.h b/keyboards/handwired/ibm_wheelwriter/config.h
deleted file mode 100644
index 254f60be74..0000000000
--- a/keyboards/handwired/ibm_wheelwriter/config.h
+++ /dev/null
@@ -1,37 +0,0 @@
-/* Copyright 2021 andresteare
- *
- * This program is free software: you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation, either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program. If not, see <http://www.gnu.org/licenses/>.
- */
-
-#pragma once
-
-
-/*
- * Keyboard Matrix Assignments
- *
- * Change this to how you wired your keyboard
- * COLS: AVR pins used for columns, left to right
- * ROWS: AVR pins used for rows, top to bottom
- * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
- * ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
- *
- */
-#define MATRIX_ROW_PINS { B0, B1, B2, B3, B7, D0, D1, D2 }
-#define MATRIX_COL_PINS { F0, F1, F4, F5, F6, F7, B6, B5, B4, D7, D6, D4, D5 }
-
-#define DIODE_DIRECTION COL2ROW
-
-
-// generated by KBFirmware JSON to QMK Parser
-// https://noroadsleft.github.io/kbf_qmk_converter/
diff --git a/keyboards/handwired/ibm_wheelwriter/info.json b/keyboards/handwired/ibm_wheelwriter/info.json
index d75336e0b6..19161e5a07 100644
--- a/keyboards/handwired/ibm_wheelwriter/info.json
+++ b/keyboards/handwired/ibm_wheelwriter/info.json
@@ -8,6 +8,11 @@
"pid": "0x5F89",
"device_version": "0.0.1"
},
+ "matrix_pins": {
+ "cols": ["F0", "F1", "F4", "F5", "F6", "F7", "B6", "B5", "B4", "D7", "D6", "D4", "D5"],
+ "rows": ["B0", "B1", "B2", "B3", "B7", "D0", "D1", "D2"]
+ },
+ "diode_direction": "COL2ROW",
"processor": "atmega32u4",
"bootloader": "atmel-dfu",
"layouts": {
diff --git a/keyboards/handwired/jn68m/config.h b/keyboards/handwired/jn68m/config.h
index a0045560a1..e736c430c0 100644
--- a/keyboards/handwired/jn68m/config.h
+++ b/keyboards/handwired/jn68m/config.h
@@ -17,14 +17,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
#pragma once
-
-/* key matrix pins */
-#define MATRIX_ROW_PINS { B0, B1, D5, D3, D2 }
-#define MATRIX_COL_PINS { F0, F1, F4, F5, F6, F7, C7, C6, B6, B5, B4, D7, D6, D4, E6, D1 }
-
-/* COL2ROW, ROW2COL*/
-#define DIODE_DIRECTION COL2ROW
-
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
#define LOCKING_SUPPORT_ENABLE
diff --git a/keyboards/handwired/jn68m/info.json b/keyboards/handwired/jn68m/info.json
index 5ea575525a..c7934968dc 100644
--- a/keyboards/handwired/jn68m/info.json
+++ b/keyboards/handwired/jn68m/info.json
@@ -8,6 +8,11 @@
"pid": "0x1010",
"device_version": "0.0.1"
},
+ "matrix_pins": {
+ "cols": ["F0", "F1", "F4", "F5", "F6", "F7", "C7", "C6", "B6", "B5", "B4", "D7", "D6", "D4", "E6", "D1"],
+ "rows": ["B0", "B1", "D5", "D3", "D2"]
+ },
+ "diode_direction": "COL2ROW",
"processor": "atmega32u4",
"bootloader": "atmel-dfu",
"layouts": {
diff --git a/keyboards/handwired/jopr/config.h b/keyboards/handwired/jopr/config.h
index 7078ebb31d..00bbcf507d 100644
--- a/keyboards/handwired/jopr/config.h
+++ b/keyboards/handwired/jopr/config.h
@@ -1,13 +1,5 @@
#pragma once
-
-/* key matrix pins */
-#define MATRIX_ROW_PINS { D0, D6, D2, D4, D3, D5, D7, C6, B6, F5 }
-#define MATRIX_COL_PINS { B3, B2, B1, B0, F7, E6, F6, B5, C7, B4, D1 }
-
-/* COL2ROW or ROW2COL */
-#define DIODE_DIRECTION COL2ROW
-
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
/* #define LOCKING_SUPPORT_ENABLE */
diff --git a/keyboards/handwired/jopr/info.json b/keyboards/handwired/jopr/info.json
index f9bb248aee..3e0ce0ab5f 100644
--- a/keyboards/handwired/jopr/info.json
+++ b/keyboards/handwired/jopr/info.json
@@ -8,6 +8,11 @@
"pid": "0x1000",
"device_version": "0.0.1"
},
+ "matrix_pins": {
+ "cols": ["B3", "B2", "B1", "B0", "F7", "E6", "F6", "B5", "C7", "B4", "D1"],
+ "rows": ["D0", "D6", "D2", "D4", "D3", "D5", "D7", "C6", "B6", "F5"]
+ },
+ "diode_direction": "COL2ROW",
"processor": "atmega32u4",
"bootloader": "atmel-dfu",
"layouts": {
diff --git a/keyboards/handwired/jot50/config.h b/keyboards/handwired/jot50/config.h
index 4cb70762fb..5f36081323 100644
--- a/keyboards/handwired/jot50/config.h
+++ b/keyboards/handwired/jot50/config.h
@@ -1,13 +1,5 @@
#pragma once
-
-/* pro_micro pin-out */
-#define MATRIX_ROW_PINS { D7, E6, B4, B6, B2 }
-#define MATRIX_COL_PINS { F4, F5, F6, F7, B1, B3, D3, D2, D1, D0, D4, C6 }
-
-/* COL2ROW or ROW2COL */
-#define DIODE_DIRECTION COL2ROW
-
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
#define LOCKING_SUPPORT_ENABLE
diff --git a/keyboards/handwired/jot50/info.json b/keyboards/handwired/jot50/info.json
index 1bcf932946..f7cfe21d00 100644
--- a/keyboards/handwired/jot50/info.json
+++ b/keyboards/handwired/jot50/info.json
@@ -8,6 +8,11 @@
"pid": "0x6060",
"device_version": "0.0.1"
},
+ "matrix_pins": {
+ "cols": ["F4", "F5", "F6", "F7", "B1", "B3", "D3", "D2", "D1", "D0", "D4", "C6"],
+ "rows": ["D7", "E6", "B4", "B6", "B2"]
+ },
+ "diode_direction": "COL2ROW",
"backlight": {
"pin": "B5",
"breathing": true
diff --git a/keyboards/handwired/jotanck/config.h b/keyboards/handwired/jotanck/config.h
index f3e53c98ce..81fc446b3a 100644
--- a/keyboards/handwired/jotanck/config.h
+++ b/keyboards/handwired/jotanck/config.h
@@ -1,18 +1,10 @@
#pragma once
-
-/* pro_micro pin-out */
-#define MATRIX_ROW_PINS { D7, E6, B6, B2 }
-#define MATRIX_COL_PINS { F4, F5, F6, F7, B1, B3, D3, D2, D1, D0, D4, C6 }
-
/* leds */
#define JOTANCK_LEDS
#define JOTANCK_LED1 B5
#define JOTANCK_LED2 B4
-/* COL2ROW or ROW2COL */
-#define DIODE_DIRECTION COL2ROW
-
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
#define LOCKING_SUPPORT_ENABLE
diff --git a/keyboards/handwired/jotanck/info.json b/keyboards/handwired/jotanck/info.json
index 57e41a0f8b..0a3c9a9e83 100644
--- a/keyboards/handwired/jotanck/info.json
+++ b/keyboards/handwired/jotanck/info.json
@@ -8,6 +8,11 @@
"pid": "0x6060",
"device_version": "0.0.1"
},
+ "matrix_pins": {
+ "cols": ["F4", "F5", "F6", "F7", "B1", "B3", "D3", "D2", "D1", "D0", "D4", "C6"],
+ "rows": ["D7", "E6", "B6", "B2"]
+ },
+ "diode_direction": "COL2ROW",
"processor": "atmega32u4",
"bootloader": "caterina",
"community_layouts": ["ortho_4x12"],
diff --git a/keyboards/handwired/jotpad16/config.h b/keyboards/handwired/jotpad16/config.h
index 9a1af0d614..0e9074f2ce 100644
--- a/keyboards/handwired/jotpad16/config.h
+++ b/keyboards/handwired/jotpad16/config.h
@@ -1,18 +1,10 @@
#pragma once
-
-/* pro_micro pin-out */
-#define MATRIX_ROW_PINS { B6, B2, D2, D3 }
-#define MATRIX_COL_PINS { E6, D7, B3, B1 }
-
/* leds */
#define JOTPAD16_LEDS
#define JOTPAD16_LED1 B5
#define JOTPAD16_LED2 B4
-/* COL2ROW or ROW2COL */
-#define DIODE_DIRECTION COL2ROW
-
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
#define LOCKING_SUPPORT_ENABLE
diff --git a/keyboards/handwired/jotpad16/info.json b/keyboards/handwired/jotpad16/info.json
index 7ec8f9aa97..2d01be7b48 100644
--- a/keyboards/handwired/jotpad16/info.json
+++ b/keyboards/handwired/jotpad16/info.json
@@ -8,6 +8,11 @@
"pid": "0x6060",
"device_version": "0.0.1"
},
+ "matrix_pins": {
+ "cols": ["E6", "D7", "B3", "B1"],
+ "rows": ["B6", "B2", "D2", "D3"]
+ },
+ "diode_direction": "COL2ROW",
"processor": "atmega32u4",
"bootloader": "caterina",
"debounce": 0,
diff --git a/keyboards/handwired/jtallbean/split_65/config.h b/keyboards/handwired/jtallbean/split_65/config.h
index 781bff90f3..313fe1940c 100644
--- a/keyboards/handwired/jtallbean/split_65/config.h
+++ b/keyboards/handwired/jtallbean/split_65/config.h
@@ -17,25 +17,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
#pragma once
-
-/*
- * Keyboard Matrix Assignments
- *
- * Change this to how you wired your keyboard
- * COLS: AVR pins used for columns, left to right
- * ROWS: AVR pins used for rows, top to bottom
- * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
- * ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
- *
- */
-#define MATRIX_ROW_PINS { F4, F1, F0, C7, B6 }
-#define MATRIX_COL_PINS { C6, B5, B4, D7, D6, D4, D2, D3, B7 } // B7 is not actually used, but it is needed since # of entries must equal 9
-#define MATRIX_ROW_PINS_RIGHT { E6, F0, F1, F7, D7 }
-#define MATRIX_COL_PINS_RIGHT { B4, B5, B6, C6, C7, D4, D6, D3, D2 }
-
-/* COL2ROW, ROW2COL*/
-#define DIODE_DIRECTION COL2ROW
-
#define SPLIT_HAND_PIN D5
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
diff --git a/keyboards/handwired/jtallbean/split_65/info.json b/keyboards/handwired/jtallbean/split_65/info.json
index 6adb995ff7..5c48352c1f 100644
--- a/keyboards/handwired/jtallbean/split_65/info.json
+++ b/keyboards/handwired/jtallbean/split_65/info.json
@@ -8,8 +8,19 @@
"pid": "0x0000",
"device_version": "0.0.1"
},
+ "matrix_pins": {
+ "cols": ["C6", "B5", "B4", "D7", "D6", "D4", "D2", "D3", "B7"],
+ "rows": ["F4", "F1", "F0", "C7", "B6"]
+ },
+ "diode_direction": "COL2ROW",
"split": {
- "soft_serial_pin": "D0"
+ "soft_serial_pin": "D0",
+ "matrix_pins": {
+ "right": {
+ "cols": ["B4", "B5", "B6", "C6", "C7", "D4", "D6", "D3", "D2"],
+ "rows": ["E6", "F0", "F1", "F7", "D7"]
+ }
+ }
},
"processor": "atmega32u4",
"bootloader": "atmel-dfu",
diff --git a/keyboards/handwired/juliet/config.h b/keyboards/handwired/juliet/config.h
index df5d4248ca..4570cdb18e 100644
--- a/keyboards/handwired/juliet/config.h
+++ b/keyboards/handwired/juliet/config.h
@@ -17,26 +17,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
#pragma once
-
-/*
- * Keyboard Matrix Assignments
- *
- * Change this to how you wired your keyboard
- * COLS: AVR pins used for columns, left to right
- * ROWS: AVR pins used for rows, top to bottom
- * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
- * ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
- *
- */
-
-/* A Custom matrix.c is used to poll the port expander C6 shows that the pins are hardwired there */
-/* 0 1 2 3 4 5 6 7 8 9 10 11*/
-#define MATRIX_ROW_PINS { F5, D2, D3, F4 }
-#define MATRIX_COL_PINS { D1, D0, D4, C6, D7, E6, B4, B5, B1, B3, B2, B6}
-
-/* COL2ROW, ROW2COL*/
-#define DIODE_DIRECTION COL2ROW
-
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
#define LOCKING_SUPPORT_ENABLE
/* Locking resynchronize hack */
diff --git a/keyboards/handwired/juliet/info.json b/keyboards/handwired/juliet/info.json
index 0fc7f4726f..c2acd0ad73 100644
--- a/keyboards/handwired/juliet/info.json
+++ b/keyboards/handwired/juliet/info.json
@@ -8,6 +8,11 @@
"pid": "0x4069",
"device_version": "0.0.1"
},
+ "matrix_pins": {
+ "cols": ["D1", "D0", "D4", "C6", "D7", "E6", "B4", "B5", "B1", "B3", "B2", "B6"],
+ "rows": ["F5", "D2", "D3", "F4"]
+ },
+ "diode_direction": "COL2ROW",
"processor": "atmega32u4",
"bootloader": "caterina",
"layouts": {
diff --git a/keyboards/handwired/k8split/config.h b/keyboards/handwired/k8split/config.h
deleted file mode 100644
index e8e7ad9411..0000000000
--- a/keyboards/handwired/k8split/config.h
+++ /dev/null
@@ -1,35 +0,0 @@
-/*
-Copyright 2020 Ckat <ckat@teknik.io>
-
-This program is free software: you can redistribute it and/or modify
-it under the terms of the GNU General Public License as published by
-the Free Software Foundation, either version 2 of the License, or
-(at your option) any later version.
-
-This program is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-GNU General Public License for more details.
-
-You should have received a copy of the GNU General Public License
-along with this program. If not, see <http://www.gnu.org/licenses/>.
-*/
-
-#pragma once
-
-
-/*
- * Keyboard Matrix Assignments
- *
- * Change this to how you wired your keyboard
- * COLS: AVR pins used for columns, left to right
- * ROWS: AVR pins used for rows, top to bottom
- * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
- * ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
- *
-*/
-#define MATRIX_ROW_PINS { D5, D3, D2, D1, D0, B7 }
-#define MATRIX_COL_PINS { C7, C6, B6, B5, B4, D7, D6, D4 }
-
-/* COL2ROW, ROW2COL */
-#define DIODE_DIRECTION COL2ROW
diff --git a/keyboards/handwired/k8split/info.json b/keyboards/handwired/k8split/info.json
index 900871f88a..4cb7713c7f 100644
--- a/keyboards/handwired/k8split/info.json
+++ b/keyboards/handwired/k8split/info.json
@@ -8,6 +8,11 @@
"pid": "0xC868",
"device_version": "0.0.1"
},
+ "matrix_pins": {
+ "cols": ["C7", "C6", "B6", "B5", "B4", "D7", "D6", "D4"],
+ "rows": ["D5", "D3", "D2", "D1", "D0", "B7"]
+ },
+ "diode_direction": "COL2ROW",
"processor": "atmega32u4",
"bootloader": "atmel-dfu",
"layouts": {
diff --git a/keyboards/handwired/k_numpad17/config.h b/keyboards/handwired/k_numpad17/config.h
index 0fd1452887..9bcc1ca12e 100644
--- a/keyboards/handwired/k_numpad17/config.h
+++ b/keyboards/handwired/k_numpad17/config.h
@@ -20,14 +20,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
#define TAPPING_TERM 400
-// ROWS: Top to bottom, COLS: Left to right
-
-#define MATRIX_ROW_PINS { D1, D4, C6, D7, E6 }
-#define MATRIX_COL_PINS { B2, B1, F6 , F4 }
-
-/* COL2ROW or ROW2COL */
-#define DIODE_DIRECTION COL2ROW
-
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
#define LOCKING_SUPPORT_ENABLE
/* Locking resynchronize hack */
diff --git a/keyboards/handwired/k_numpad17/info.json b/keyboards/handwired/k_numpad17/info.json
index 1ea003178b..ceac0277d0 100644
--- a/keyboards/handwired/k_numpad17/info.json
+++ b/keyboards/handwired/k_numpad17/info.json
@@ -8,6 +8,11 @@
"pid": "0x6060",
"device_version": "0.0.1"
},
+ "matrix_pins": {
+ "cols": ["B2", "B1", "F6", "F4"],
+ "rows": ["D1", "D4", "C6", "D7", "E6"]
+ },
+ "diode_direction": "COL2ROW",
"processor": "atmega32u4",
"bootloader": "caterina",
"community_layouts": ["numpad_5x4"],
diff --git a/keyboards/handwired/kbod/config.h b/keyboards/handwired/kbod/config.h
index 2366898f05..f952881772 100644
--- a/keyboards/handwired/kbod/config.h
+++ b/keyboards/handwired/kbod/config.h
@@ -17,12 +17,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
#pragma once
-
-#define MATRIX_ROW_PINS { C6, D7, E6, B4, B5, B6, B7, D6 }
-#define MATRIX_COL_PINS { D0, D1, F0, F1, F4, F5, F6, F7 }
-
-#define DIODE_DIRECTION COL2ROW
-
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
#define LOCKING_SUPPORT_ENABLE
/* Locking resynchronize hack */
diff --git a/keyboards/handwired/kbod/info.json b/keyboards/handwired/kbod/info.json
index 6ce0f46f2c..667e53756e 100644
--- a/keyboards/handwired/kbod/info.json
+++ b/keyboards/handwired/kbod/info.json
@@ -8,6 +8,11 @@
"pid": "0x6060",
"device_version": "0.0.1"
},
+ "matrix_pins": {
+ "cols": ["D0", "D1", "F0", "F1", "F4", "F5", "F6", "F7"],
+ "rows": ["C6", "D7", "E6", "B4", "B5", "B6", "B7", "D6"]
+ },
+ "diode_direction": "COL2ROW",
"indicators": {
"caps_lock": "B0"
},
diff --git a/keyboards/handwired/ks63/config.h b/keyboards/handwired/ks63/config.h
index 1a75229c51..f470196e1d 100644
--- a/keyboards/handwired/ks63/config.h
+++ b/keyboards/handwired/ks63/config.h
@@ -18,13 +18,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
#pragma once
-
-/* key matrix pins */
-#define MATRIX_ROW_PINS { B5, B4, E6, D7, C6 }
-#define MATRIX_COL_PINS { B6, B2, B3, B1, F7, F6, F5, F4 }
-
-#define DIODE_DIRECTION COL2ROW
-
/* mouse config */
#define MOUSEKEY_INTERVAL 20
#define MOUSEKEY_DELAY 0
diff --git a/keyboards/handwired/ks63/info.json b/keyboards/handwired/ks63/info.json
index df7bf5c645..8bb32c871d 100644
--- a/keyboards/handwired/ks63/info.json
+++ b/keyboards/handwired/ks63/info.json
@@ -8,6 +8,11 @@
"pid": "0x3061",
"device_version": "0.0.1"
},
+ "matrix_pins": {
+ "cols": ["B6", "B2", "B3", "B1", "F7", "F6", "F5", "F4"],
+ "rows": ["B5", "B4", "E6", "D7", "C6"]
+ },
+ "diode_direction": "COL2ROW",
"split": {
"soft_serial_pin": "D0"
},
diff --git a/keyboards/handwired/lagrange/config.h b/keyboards/handwired/lagrange/config.h
index 618862f2e2..5875c7e7c4 100644
--- a/keyboards/handwired/lagrange/config.h
+++ b/keyboards/handwired/lagrange/config.h
@@ -19,12 +19,3 @@
#define EE_HANDS
#define SPLIT_USB_DETECT
-
-/* pin-out */
-#define MATRIX_ROW_PINS { E6, F1, F0, F4, F5, F6, F7 }
-#define MATRIX_COL_PINS { B4, B5, D7, B6, C6, D6 }
-#define MATRIX_ROW_PINS_RIGHT { B5, B4, D7, B6, C6, D6, D4 }
-#define MATRIX_COL_PINS_RIGHT { C7, F7, F6, F5, F4, F1 }
-
-/* COL2ROW or ROW2COL */
-#define DIODE_DIRECTION ROW2COL
diff --git a/keyboards/handwired/lagrange/info.json b/keyboards/handwired/lagrange/info.json
index 7d1179e1f4..1141183e18 100644
--- a/keyboards/handwired/lagrange/info.json
+++ b/keyboards/handwired/lagrange/info.json
@@ -8,6 +8,19 @@
"pid": "0x2718",
"device_version": "0.0.1"
},
+ "matrix_pins": {
+ "cols": ["B4", "B5", "D7", "B6", "C6", "D6"],
+ "rows": ["E6", "F1", "F0", "F4", "F5", "F6", "F7"]
+ },
+ "diode_direction": "ROW2COL",
+ "split": {
+ "matrix_pins": {
+ "right": {
+ "cols": ["C7", "F7", "F6", "F5", "F4", "F1"],
+ "rows": ["B5", "B4", "D7", "B6", "C6", "D6", "D4"]
+ }
+ }
+ },
"indicators": {
"caps_lock": "D1",
"scroll_lock": "D2"
diff --git a/keyboards/handwired/leftynumpad/config.h b/keyboards/handwired/leftynumpad/config.h
index 3f59e84459..831b41bcd2 100644
--- a/keyboards/handwired/leftynumpad/config.h
+++ b/keyboards/handwired/leftynumpad/config.h
@@ -17,23 +17,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
#pragma once
-
-/*
- * Keyboard Matrix Assignments
- *
- * Change this to how you wired your keyboard
- * COLS: AVR pins used for columns, left to right
- * ROWS: AVR pins used for rows, top to bottom
- * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
- * ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
- *
- */
-#define MATRIX_ROW_PINS { D1, D0, D4, C6, D7 }
-#define MATRIX_COL_PINS { E6, B4, B5, B6, B2 }
-
-/* COL2ROW, ROW2COL*/
-#define DIODE_DIRECTION COL2ROW
-
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
#define LOCKING_SUPPORT_ENABLE
/* Locking resynchronize hack */
diff --git a/keyboards/handwired/leftynumpad/info.json b/keyboards/handwired/leftynumpad/info.json
index ffa7915a7d..c265fe3cfe 100644
--- a/keyboards/handwired/leftynumpad/info.json
+++ b/keyboards/handwired/leftynumpad/info.json
@@ -8,6 +8,11 @@
"pid": "0xBEEF",
"device_version": "0.0.1"
},
+ "matrix_pins": {
+ "cols": ["E6", "B4", "B5", "B6", "B2"],
+ "rows": ["D1", "D0", "D4", "C6", "D7"]
+ },
+ "diode_direction": "COL2ROW",
"processor": "atmega32u4",
"bootloader": "atmel-dfu",
"debounce": 10,
diff --git a/keyboards/handwired/lovelive9/config.h b/keyboards/handwired/lovelive9/config.h
index f99c65303c..d960bc9b2a 100644
--- a/keyboards/handwired/lovelive9/config.h
+++ b/keyboards/handwired/lovelive9/config.h
@@ -2,13 +2,6 @@
#pragma once
-/* default pin-out */
-#define MATRIX_ROW_PINS { NO_PIN }
-#define MATRIX_COL_PINS { B4, B6, B2, D7, B1, F7, F6, F5, F4 }
-
-#define DIODE_DIRECTION COL2ROW
-
-
/* ws2812 RGB LED */
#define RGB_DI_PIN D3
diff --git a/keyboards/handwired/lovelive9/info.json b/keyboards/handwired/lovelive9/info.json
index be3541c4fd..f5cecc75e5 100644
--- a/keyboards/handwired/lovelive9/info.json
+++ b/keyboards/handwired/lovelive9/info.json
@@ -8,6 +8,11 @@
"pid": "0x0007",
"device_version": "0.0.1"
},
+ "matrix_pins": {
+ "cols": ["B4", "B6", "B2", "D7", "B1", "F7", "F6", "F5", "F4"],
+ "rows": [null]
+ },
+ "diode_direction": "COL2ROW",
"backlight": {
"breathing_period": 2
},
diff --git a/keyboards/handwired/m40/5x5_macropad/config.h b/keyboards/handwired/m40/5x5_macropad/config.h
index 2061849845..6770ce638c 100644
--- a/keyboards/handwired/m40/5x5_macropad/config.h
+++ b/keyboards/handwired/m40/5x5_macropad/config.h
@@ -3,23 +3,6 @@
#pragma once
-
-/*
- * Keyboard Matrix Assignments
- *
- * Change this to how you wired your keyboard
- * COLS: AVR pins used for columns, left to right
- * ROWS: AVR pins used for rows, top to bottom
- * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
- * ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
- *
- */
-#define MATRIX_ROW_PINS { B5, B4, E6, D7, C6 }
-#define MATRIX_COL_PINS { B6, B2, B3, B1, F7 }
-
-/* COL2ROW, ROW2COL */
-#define DIODE_DIRECTION COL2ROW
-
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
#define LOCKING_SUPPORT_ENABLE
/* Locking resynchronize hack */
diff --git a/keyboards/handwired/m40/5x5_macropad/info.json b/keyboards/handwired/m40/5x5_macropad/info.json
index 3e9138af27..d5eeb65eb0 100644
--- a/keyboards/handwired/m40/5x5_macropad/info.json
+++ b/keyboards/handwired/m40/5x5_macropad/info.json
@@ -8,6 +8,11 @@
"pid": "0x0000",
"device_version": "0.0.1"
},
+ "matrix_pins": {
+ "cols": ["B6", "B2", "B3", "B1", "F7"],
+ "rows": ["B5", "B4", "E6", "D7", "C6"]
+ },
+ "diode_direction": "COL2ROW",
"processor": "atmega32u4",
"bootloader": "caterina",
"layouts": {
diff --git a/keyboards/handwired/macroboard/config.h b/keyboards/handwired/macroboard/config.h
index 4063b253b6..a3de56d076 100644
--- a/keyboards/handwired/macroboard/config.h
+++ b/keyboards/handwired/macroboard/config.h
@@ -17,20 +17,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
#pragma once
-
-/*
- * Keyboard Matrix Assignments
- *
- * Change this to how you wired your keyboard
- * COLS: AVR pins used for columns, left to right
- * ROWS: AVR pins used for rows, top to bottom
- * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
- * ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
- *
- */
-
-#define DIODE_DIRECTION COL2ROW
-
#define RGB_DI_PIN B9
#define WS2812_PWM_DRIVER PWMD4
#define WS2812_PWM_CHANNEL 4
diff --git a/keyboards/handwired/macroboard/f401/config.h b/keyboards/handwired/macroboard/f401/config.h
deleted file mode 100644
index c5ea2ff6a2..0000000000
--- a/keyboards/handwired/macroboard/f401/config.h
+++ /dev/null
@@ -1,22 +0,0 @@
-/*
-Copyright 2021 Michał Szczepaniak
-
-This program is free software: you can redistribute it and/or modify
-it under the terms of the GNU General Public License as published by
-the Free Software Foundation, either version 2 of the License, or
-(at your option) any later version.
-
-This program is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-GNU General Public License for more details.
-
-You should have received a copy of the GNU General Public License
-along with this program. If not, see <http://www.gnu.org/licenses/>.
-*/
-
-#pragma once
-
-
-#define MATRIX_ROW_PINS { A4, A3, A2, A1, A0 }
-#define MATRIX_COL_PINS { A5, A6, A7, B0, B1, B10 }
diff --git a/keyboards/handwired/macroboard/f401/info.json b/keyboards/handwired/macroboard/f401/info.json
index acd7e83f77..e14cb41fd3 100644
--- a/keyboards/handwired/macroboard/f401/info.json
+++ b/keyboards/handwired/macroboard/f401/info.json
@@ -1,4 +1,9 @@
{
+ "matrix_pins": {
+ "cols": ["A5", "A6", "A7", "B0", "B1", "B10"],
+ "rows": ["A4", "A3", "A2", "A1", "A0"]
+ },
+ "diode_direction": "COL2ROW",
"processor": "STM32F401",
"bootloader": "stm32-dfu",
"board": "BLACKPILL_STM32_F401"
diff --git a/keyboards/handwired/macroboard/f411/config.h b/keyboards/handwired/macroboard/f411/config.h
index c7004fd520..cc951dcefc 100644
--- a/keyboards/handwired/macroboard/f411/config.h
+++ b/keyboards/handwired/macroboard/f411/config.h
@@ -17,10 +17,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
#pragma once
-
-#define MATRIX_ROW_PINS { A15, B3, B4, B5, B7 }
-#define MATRIX_COL_PINS { B12, B13, B14, B15, A8, A10 }
-
#define AUDIO_INIT_DELAY
#define AUDIO_PIN B10
#define AUDIO_PWM_DRIVER PWMD2
diff --git a/keyboards/handwired/macroboard/f411/info.json b/keyboards/handwired/macroboard/f411/info.json
index 2517a82403..a912b9f141 100644
--- a/keyboards/handwired/macroboard/f411/info.json
+++ b/keyboards/handwired/macroboard/f411/info.json
@@ -1,4 +1,9 @@
{
+ "matrix_pins": {
+ "cols": ["B12", "B13", "B14", "B15", "A8", "A10"],
+ "rows": ["A15", "B3", "B4", "B5", "B7"]
+ },
+ "diode_direction": "COL2ROW",
"processor": "STM32F411",
"bootloader": "stm32-dfu",
"board": "BLACKPILL_STM32_F411"
diff --git a/keyboards/handwired/magicforce61/config.h b/keyboards/handwired/magicforce61/config.h
index 2518265be6..b9449c4714 100644
--- a/keyboards/handwired/magicforce61/config.h
+++ b/keyboards/handwired/magicforce61/config.h
@@ -17,23 +17,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
#pragma once
-
-/*
- * Keyboard Matrix Assignments
- *
- * Change this to how you wired your keyboard
- * COLS: AVR pins used for columns, left to right
- * ROWS: AVR pins used for rows, top to bottom
- * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
- * ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
- *
-*/
-#define MATRIX_ROW_PINS { D0, D1, D2, D3, D4 }
-#define MATRIX_COL_PINS { B5, B4, B3, B2, B1, B0, E7, E6, F0, F1, F2, F3, F4, F5 }
-
-/* COL2ROW or ROW2COL */
-#define DIODE_DIRECTION COL2ROW
-
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
#define LOCKING_SUPPORT_ENABLE
/* Locking resynchronize hack */
diff --git a/keyboards/handwired/magicforce61/info.json b/keyboards/handwired/magicforce61/info.json
index 9652a35ba5..fd457aba7e 100644
--- a/keyboards/handwired/magicforce61/info.json
+++ b/keyboards/handwired/magicforce61/info.json
@@ -8,6 +8,11 @@
"pid": "0x6060",
"device_version": "0.0.1"
},
+ "matrix_pins": {
+ "cols": ["B5", "B4", "B3", "B2", "B1", "B0", "E7", "E6", "F0", "F1", "F2", "F3", "F4", "F5"],
+ "rows": ["D0", "D1", "D2", "D3", "D4"]
+ },
+ "diode_direction": "COL2ROW",
"processor": "at90usb1286",
"bootloader": "halfkay",
"layouts": {
diff --git a/keyboards/handwired/magicforce68/config.h b/keyboards/handwired/magicforce68/config.h
index b4c67fbbd7..b9449c4714 100644
--- a/keyboards/handwired/magicforce68/config.h
+++ b/keyboards/handwired/magicforce68/config.h
@@ -17,23 +17,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
#pragma once
-
-/*
- * Keyboard Matrix Assignments
- *
- * Change this to how you wired your keyboard
- * COLS: AVR pins used for columns, left to right
- * ROWS: AVR pins used for rows, top to bottom
- * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
- * ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
- *
-*/
-#define MATRIX_ROW_PINS { F0, F1, F4, F5, F6 }
-#define MATRIX_COL_PINS { B2, B0, D3, D2, D1, D0, D4, C6, D7, E6, B4, B5, B6, B7, D6 }
-
-/* COL2ROW or ROW2COL */
-#define DIODE_DIRECTION COL2ROW
-
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
#define LOCKING_SUPPORT_ENABLE
/* Locking resynchronize hack */
diff --git a/keyboards/handwired/magicforce68/info.json b/keyboards/handwired/magicforce68/info.json
index c1df42eed8..4656394858 100644
--- a/keyboards/handwired/magicforce68/info.json
+++ b/keyboards/handwired/magicforce68/info.json
@@ -8,6 +8,11 @@
"pid": "0x6060",
"device_version": "0.0.1"
},
+ "matrix_pins": {
+ "cols": ["B2", "B0", "D3", "D2", "D1", "D0", "D4", "C6", "D7", "E6", "B4", "B5", "B6", "B7", "D6"],
+ "rows": ["F0", "F1", "F4", "F5", "F6"]
+ },
+ "diode_direction": "COL2ROW",
"processor": "atmega32u4",
"bootloader": "caterina",
"layouts": {
diff --git a/keyboards/handwired/marauder/config.h b/keyboards/handwired/marauder/config.h
index 608411ef31..1d6272b3d4 100644
--- a/keyboards/handwired/marauder/config.h
+++ b/keyboards/handwired/marauder/config.h
@@ -16,20 +16,6 @@
#pragma once
-
-/*
- * Keyboard Matrix Assignments
- *
- * Change this to how you wired your keyboard
- * COLS: AVR pins used for columns, left to right
- * ROWS: AVR pins used for rows, top to bottom
- * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
- * ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
- *
- */
-#define MATRIX_ROW_PINS { D2, D4, C6, D7, E6, B4, B5, B7, D5, C7, F1, F0 }
-#define MATRIX_COL_PINS { B6, B2, B3, B1, F7, F6, F5, F4, B0 }
-#define DIODE_DIRECTION COL2ROW
#define LAYER_STATE_8BIT
#define RGB_DI_PIN D3
diff --git a/keyboards/handwired/marauder/info.json b/keyboards/handwired/marauder/info.json
index 16fdc30e26..059cc1dd33 100644
--- a/keyboards/handwired/marauder/info.json
+++ b/keyboards/handwired/marauder/info.json
@@ -8,6 +8,11 @@
"pid": "0x0001",
"device_version": "0.0.1"
},
+ "matrix_pins": {
+ "cols": ["B6", "B2", "B3", "B1", "F7", "F6", "F5", "F4", "B0"],
+ "rows": ["D2", "D4", "C6", "D7", "E6", "B4", "B5", "B7", "D5", "C7", "F1", "F0"]
+ },
+ "diode_direction": "COL2ROW",
"processor": "atmega32u4",
"bootloader": "atmel-dfu",
"layouts": {
diff --git a/keyboards/handwired/mechboards_micropad/config.h b/keyboards/handwired/mechboards_micropad/config.h
index ac759e6771..3fd748d182 100644
--- a/keyboards/handwired/mechboards_micropad/config.h
+++ b/keyboards/handwired/mechboards_micropad/config.h
@@ -17,23 +17,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
#pragma once
-
-/*
- * Keyboard Matrix Assignments
- *
- * Change this to how you wired your keyboard
- * COLS: AVR pins used for columns, left to right
- * ROWS: AVR pins used for rows, top to bottom
- * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
- * ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
- *
-*/
-#define MATRIX_ROW_PINS { B6 }
-#define MATRIX_COL_PINS { B2, B3, B1, F7 }
-
-/* COL2ROW, ROW2COL*/
-#define DIODE_DIRECTION COL2ROW
-
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
#define LOCKING_SUPPORT_ENABLE
/* Locking resynchronize hack */
diff --git a/keyboards/handwired/mechboards_micropad/info.json b/keyboards/handwired/mechboards_micropad/info.json
index e5e848fd71..6d751780f6 100644
--- a/keyboards/handwired/mechboards_micropad/info.json
+++ b/keyboards/handwired/mechboards_micropad/info.json
@@ -8,6 +8,11 @@
"pid": "0x0001",
"device_version": "0.0.1"
},
+ "matrix_pins": {
+ "cols": ["B2", "B3", "B1", "F7"],
+ "rows": ["B6"]
+ },
+ "diode_direction": "COL2ROW",
"processor": "atmega32u4",
"bootloader": "caterina",
"layouts": {
diff --git a/keyboards/handwired/meck_tkl/blackpill_f401/config.h b/keyboards/handwired/meck_tkl/blackpill_f401/config.h
deleted file mode 100644
index dcf0a27d21..0000000000
--- a/keyboards/handwired/meck_tkl/blackpill_f401/config.h
+++ /dev/null
@@ -1,9 +0,0 @@
-// Copyright 2021 Gabriel Kim (@gabrielkim13)
-// SPDX-License-Identifier: GPL-2.0-or-later
-
-#pragma once
-
-#define MATRIX_ROW_PINS \
- { B15, A8, A9, B14, A15, B3 }
-#define MATRIX_COL_PINS \
- { B4, B5, B6, B7, B8, B9, A1, A2, A3, A4, A5, A6, A7, B0, B1, A0, B10 }
diff --git a/keyboards/handwired/meck_tkl/blackpill_f401/info.json b/keyboards/handwired/meck_tkl/blackpill_f401/info.json
index 68df328ac7..eeaa9c392b 100644
--- a/keyboards/handwired/meck_tkl/blackpill_f401/info.json
+++ b/keyboards/handwired/meck_tkl/blackpill_f401/info.json
@@ -1,4 +1,9 @@
{
+ "matrix_pins": {
+ "cols": ["B4", "B5", "B6", "B7", "B8", "B9", "A1", "A2", "A3", "A4", "A5", "A6", "A7", "B0", "B1", "A0", "B10"],
+ "rows": ["B15", "A8", "A9", "B14", "A15", "B3"]
+ },
+ "diode_direction": "COL2ROW",
"indicators": {
"caps_lock": "C13",
"on_state": 0
diff --git a/keyboards/handwired/meck_tkl/config.h b/keyboards/handwired/meck_tkl/config.h
index 06430fffeb..30221cc216 100644
--- a/keyboards/handwired/meck_tkl/config.h
+++ b/keyboards/handwired/meck_tkl/config.h
@@ -3,21 +3,6 @@
#pragma once
-
-/*
- * Keyboard Matrix Assignments
- *
- * Change this to how you wired your keyboard
- * COLS: AVR pins used for columns, left to right
- * ROWS: AVR pins used for rows, top to bottom
- * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
- * ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
- *
- */
-
-/* COL2ROW, ROW2COL */
-#define DIODE_DIRECTION COL2ROW
-
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
#define LOCKING_SUPPORT_ENABLE
/* Locking resynchronize hack */
diff --git a/keyboards/handwired/minorca/config.h b/keyboards/handwired/minorca/config.h
index 2bfa506264..b9449c4714 100644
--- a/keyboards/handwired/minorca/config.h
+++ b/keyboards/handwired/minorca/config.h
@@ -17,14 +17,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
#pragma once
-
-/* MinOrca PCB default pin-out */
-#define MATRIX_COL_PINS { D4, D6, D7, B4, B5, B6, F7, F6, F5, F4, F1, F0 }
-#define MATRIX_ROW_PINS { B0, B1, B2, B3 }
-
-/* COL2ROW or ROW2COL */
-#define DIODE_DIRECTION COL2ROW
-
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
#define LOCKING_SUPPORT_ENABLE
/* Locking resynchronize hack */
diff --git a/keyboards/handwired/minorca/info.json b/keyboards/handwired/minorca/info.json
index b91e59ca67..c7b463f223 100644
--- a/keyboards/handwired/minorca/info.json
+++ b/keyboards/handwired/minorca/info.json
@@ -8,6 +8,11 @@
"pid": "0x6660",
"device_version": "0.0.1"
},
+ "matrix_pins": {
+ "cols": ["D4", "D6", "D7", "B4", "B5", "B6", "F7", "F6", "F5", "F4", "F1", "F0"],
+ "rows": ["B0", "B1", "B2", "B3"]
+ },
+ "diode_direction": "COL2ROW",
"processor": "atmega32u4",
"bootloader": "halfkay",
"layouts": {
diff --git a/keyboards/handwired/ms_sculpt_mobile/astar/config.h b/keyboards/handwired/ms_sculpt_mobile/astar/config.h
deleted file mode 100644
index aafa6953c7..0000000000
--- a/keyboards/handwired/ms_sculpt_mobile/astar/config.h
+++ /dev/null
@@ -1,4 +0,0 @@
-#pragma once
-
-#define MATRIX_ROW_PINS { D7, C6, D4, D0, D1, D3, D2, E2 }
-#define MATRIX_COL_PINS { B4, B5, E6, B7, B6, D6, C7, F7, F6, F4, F5, F1, F0, D5, B0, B1, B2, B3 }
diff --git a/keyboards/handwired/ms_sculpt_mobile/astar/info.json b/keyboards/handwired/ms_sculpt_mobile/astar/info.json
index 6f6786e9ad..9454bcda70 100644
--- a/keyboards/handwired/ms_sculpt_mobile/astar/info.json
+++ b/keyboards/handwired/ms_sculpt_mobile/astar/info.json
@@ -1,4 +1,9 @@
{
+ "matrix_pins": {
+ "cols": ["B4", "B5", "E6", "B7", "B6", "D6", "C7", "F7", "F6", "F4", "F5", "F1", "F0", "D5", "B0", "B1", "B2", "B3"],
+ "rows": ["D7", "C6", "D4", "D0", "D1", "D3", "D2", "E2"]
+ },
+ "diode_direction": "ROW2COL",
"keyboard_name": "sculpt mobile astar",
"processor": "atmega32u4",
"bootloader": "caterina"
diff --git a/keyboards/handwired/ms_sculpt_mobile/config.h b/keyboards/handwired/ms_sculpt_mobile/config.h
deleted file mode 100644
index 27fba0b887..0000000000
--- a/keyboards/handwired/ms_sculpt_mobile/config.h
+++ /dev/null
@@ -1,38 +0,0 @@
-/*
-Copyright 2012 Jun Wako <wakojun@gmail.com>
-
-This program is free software: you can redistribute it and/or modify
-it under the terms of the GNU General Public License as published by
-the Free Software Foundation, either version 2 of the License, or
-(at your option) any later version.
-
-This program is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-GNU General Public License for more details.
-
-You should have received a copy of the GNU General Public License
-along with this program. If not, see <http://www.gnu.org/licenses/>.
-*/
-
-#pragma once
-
-
-/* COL2ROW or ROW2COL */
-#define DIODE_DIRECTION ROW2COL
-
-/*
- * Feature disable options
- * These options are also useful to firmware size reduction.
- */
-
-/* disable debug print */
-//#define NO_DEBUG
-
-/* disable print */
-//#define NO_PRINT
-
-/* disable action features */
-//#define NO_ACTION_LAYER
-//#define NO_ACTION_TAPPING
-//#define NO_ACTION_ONESHOT
diff --git a/keyboards/handwired/ms_sculpt_mobile/teensy2pp/config.h b/keyboards/handwired/ms_sculpt_mobile/teensy2pp/config.h
deleted file mode 100644
index 7a514a76cb..0000000000
--- a/keyboards/handwired/ms_sculpt_mobile/teensy2pp/config.h
+++ /dev/null
@@ -1,4 +0,0 @@
-#pragma once
-
-#define MATRIX_ROW_PINS { F7, F6, F4, F5, F3, F2, F1, F0 }
-#define MATRIX_COL_PINS { B7, D0, D1, D2, D3, D4, D5, D6, D7, E0, E1, C1, C0, C3, C2, C5, C4, C7 }
diff --git a/keyboards/handwired/ms_sculpt_mobile/teensy2pp/info.json b/keyboards/handwired/ms_sculpt_mobile/teensy2pp/info.json
index 08fc09e4b1..2d500a8ae2 100644
--- a/keyboards/handwired/ms_sculpt_mobile/teensy2pp/info.json
+++ b/keyboards/handwired/ms_sculpt_mobile/teensy2pp/info.json
@@ -1,5 +1,10 @@
{
"keyboard_name": "sculpt mobile teensypp",
+ "matrix_pins": {
+ "cols": ["B7", "D0", "D1", "D2", "D3", "D4", "D5", "D6", "D7", "E0", "E1", "C1", "C0", "C3", "C2", "C5", "C4", "C7"],
+ "rows": ["F7", "F6", "F4", "F5", "F3", "F2", "F1", "F0"]
+ },
+ "diode_direction": "ROW2COL",
"processor": "at90usb1286",
"bootloader": "halfkay"
}
diff --git a/keyboards/handwired/mutepad/config.h b/keyboards/handwired/mutepad/config.h
index 9ebec0ffef..9dcdd90bb7 100644
--- a/keyboards/handwired/mutepad/config.h
+++ b/keyboards/handwired/mutepad/config.h
@@ -3,27 +3,8 @@
#pragma once
-
-/*
- * Keyboard Matrix Assignments
- *
- * Change this to how you wired your keyboard
- * COLS: AVR pins used for columns, left to right
- * ROWS: AVR pins used for rows, top to bottom
- * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
- * ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
- *
- */
-#define MATRIX_ROW_PINS \
- { F6 }
-#define MATRIX_COL_PINS \
- { B1, B3, B2, B6 }
-
#define TAP_CODE_DELAY 10
-/* COL2ROW, ROW2COL */
-#define DIODE_DIRECTION COL2ROW
-
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
#define LOCKING_SUPPORT_ENABLE
/* Locking resynchronize hack */
diff --git a/keyboards/handwired/mutepad/info.json b/keyboards/handwired/mutepad/info.json
index 6068f33b9d..15b8d4bc69 100644
--- a/keyboards/handwired/mutepad/info.json
+++ b/keyboards/handwired/mutepad/info.json
@@ -8,6 +8,11 @@
"pid": "0x0000",
"device_version": "0.0.1"
},
+ "matrix_pins": {
+ "cols": ["B1", "B3", "B2", "B6"],
+ "rows": ["F6"]
+ },
+ "diode_direction": "COL2ROW",
"encoder": {
"rotary": [
{"pin_a": "F4", "pin_b": "F5", "resolution": 2}
diff --git a/keyboards/handwired/myskeeb/config.h b/keyboards/handwired/myskeeb/config.h
index b88e3f0d48..2e2a2bbcbf 100644
--- a/keyboards/handwired/myskeeb/config.h
+++ b/keyboards/handwired/myskeeb/config.h
@@ -1,12 +1,5 @@
#pragma once
-
-// Wiring of Each Half
-#define DIODE_DIRECTION COL2ROW
-#define MATRIX_ROW_PINS { C6, D7, E6, B4, B5 }
-#define MATRIX_COL_PINS { B6, B2, B3, B1, F6, F7, F5 }
-#define MATRIX_COL_PINS_RIGHT { F5, B3, F7, B1, F6, B2, B6 }
-
// Comunication and Split Detection
#define SELECT_SOFT_SERIAL_SPEED 1
diff --git a/keyboards/handwired/myskeeb/info.json b/keyboards/handwired/myskeeb/info.json
index 750645d6f4..a72ceb4fc7 100644
--- a/keyboards/handwired/myskeeb/info.json
+++ b/keyboards/handwired/myskeeb/info.json
@@ -8,8 +8,18 @@
"pid": "0x6060",
"device_version": "1.0.0"
},
+ "matrix_pins": {
+ "cols": ["B6", "B2", "B3", "B1", "F6", "F7", "F5"],
+ "rows": ["C6", "D7", "E6", "B4", "B5"]
+ },
+ "diode_direction": "COL2ROW",
"split": {
- "soft_serial_pin": "D3"
+ "soft_serial_pin": "D3",
+ "matrix_pins": {
+ "right": {
+ "cols": ["F5", "B3", "F7", "B1", "F6", "B2", "B6"]
+ }
+ }
},
"processor": "atmega32u4",
"bootloader": "caterina",
diff --git a/keyboards/handwired/nicekey/config.h b/keyboards/handwired/nicekey/config.h
index f5019df285..4b007cf387 100644
--- a/keyboards/handwired/nicekey/config.h
+++ b/keyboards/handwired/nicekey/config.h
@@ -17,12 +17,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
#pragma once
-
-#define MATRIX_COL_PINS { C6 }
-#define MATRIX_ROW_PINS { B6 }
-
-#define DIODE_DIRECTION COL2ROW
-
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
#define LOCKING_SUPPORT_ENABLE
/* Locking resynchronize hack */
diff --git a/keyboards/handwired/nicekey/info.json b/keyboards/handwired/nicekey/info.json
index 24872ad800..20a10a7e83 100644
--- a/keyboards/handwired/nicekey/info.json
+++ b/keyboards/handwired/nicekey/info.json
@@ -8,6 +8,11 @@
"pid": "0x6464",
"device_version": "0.0.1"
},
+ "matrix_pins": {
+ "cols": ["C6"],
+ "rows": ["B6"]
+ },
+ "diode_direction": "COL2ROW",
"processor": "atmega32u4",
"bootloader": "caterina",
"layouts": {
diff --git a/keyboards/handwired/not_so_minidox/config.h b/keyboards/handwired/not_so_minidox/config.h
index 23cc53d3f8..6a4ebbec82 100644
--- a/keyboards/handwired/not_so_minidox/config.h
+++ b/keyboards/handwired/not_so_minidox/config.h
@@ -17,14 +17,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
#pragma once
-
-/* COL2ROW or ROW2COL */
-#define DIODE_DIRECTION COL2ROW
-
-// wiring of each half
-#define MATRIX_ROW_PINS { D7, E6, B4, B5 }
-#define MATRIX_COL_PINS { B6, B2, B3, B1, F7, D4 }
-
//#define EE_HANDS
#define MASTER_LEFT
diff --git a/keyboards/handwired/not_so_minidox/info.json b/keyboards/handwired/not_so_minidox/info.json
index fa408e6633..dee4d76c50 100644
--- a/keyboards/handwired/not_so_minidox/info.json
+++ b/keyboards/handwired/not_so_minidox/info.json
@@ -8,6 +8,11 @@
"pid": "0x3060",
"device_version": "0.0.1"
},
+ "matrix_pins": {
+ "cols": ["B6", "B2", "B3", "B1", "F7", "D4"],
+ "rows": ["D7", "E6", "B4", "B5"]
+ },
+ "diode_direction": "COL2ROW",
"split": {
"soft_serial_pin": "D0"
},
diff --git a/keyboards/handwired/novem/config.h b/keyboards/handwired/novem/config.h
index 5758bc41c3..b5a88cb22e 100644
--- a/keyboards/handwired/novem/config.h
+++ b/keyboards/handwired/novem/config.h
@@ -17,23 +17,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
#pragma once
-
-/*
- * Keyboard Matrix Assignments
- *
- * Change this to how you wired your keyboard
- * COLS: AVR pins used for columns, left to right
- * ROWS: AVR pins used for rows, top to bottom
- * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
- * ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
- *
- */
-#define MATRIX_ROW_PINS { E6, B4, B5 }
-#define MATRIX_COL_PINS { B3, B2, B6 }
-
-/* COL2ROW, ROW2COL*/
-#define DIODE_DIRECTION COL2ROW
-
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
#define LOCKING_SUPPORT_ENABLE
/* Locking resynchronize hack */
diff --git a/keyboards/handwired/novem/info.json b/keyboards/handwired/novem/info.json
index 656863da64..be6e3a1764 100644
--- a/keyboards/handwired/novem/info.json
+++ b/keyboards/handwired/novem/info.json
@@ -8,6 +8,11 @@
"pid": "0x0000",
"device_version": "0.0.1"
},
+ "matrix_pins": {
+ "cols": ["B3", "B2", "B6"],
+ "rows": ["E6", "B4", "B5"]
+ },
+ "diode_direction": "COL2ROW",
"processor": "atmega32u4",
"bootloader": "caterina",
"layouts": {
diff --git a/keyboards/handwired/nozbe_macro/config.h b/keyboards/handwired/nozbe_macro/config.h
index 66b0bf2b75..81860eaf4d 100644
--- a/keyboards/handwired/nozbe_macro/config.h
+++ b/keyboards/handwired/nozbe_macro/config.h
@@ -17,16 +17,6 @@
#pragma once
-
-/* key matrix pins */
-#define MATRIX_ROW_PINS \
- { B0 }
-#define MATRIX_COL_PINS \
- { D1, D0, D4, C6 }
-
-/* COL2ROW or ROW2COL */
-#define DIODE_DIRECTION COL2ROW
-
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
#define LOCKING_SUPPORT_ENABLE
diff --git a/keyboards/handwired/nozbe_macro/info.json b/keyboards/handwired/nozbe_macro/info.json
index 162b3a6803..5d796312cc 100644
--- a/keyboards/handwired/nozbe_macro/info.json
+++ b/keyboards/handwired/nozbe_macro/info.json
@@ -8,6 +8,11 @@
"pid": "0x6060",
"device_version": "0.0.1"
},
+ "matrix_pins": {
+ "cols": ["D1", "D0", "D4", "C6"],
+ "rows": ["B0"]
+ },
+ "diode_direction": "COL2ROW",
"backlight": {
"pin": "B5"
},
diff --git a/keyboards/handwired/numpad20/config.h b/keyboards/handwired/numpad20/config.h
index 9c2c66732a..b9449c4714 100644
--- a/keyboards/handwired/numpad20/config.h
+++ b/keyboards/handwired/numpad20/config.h
@@ -17,23 +17,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
#pragma once
-
-/*
- * Keyboard Matrix Assignments
- *
- * Change this to how you wired your keyboard
- * COLS: AVR pins used for columns, left to right
- * ROWS: AVR pins used for rows, top to bottom
- * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
- * ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
- *
-*/
-#define MATRIX_ROW_PINS { F6, B1, B3, B6, B5 }
-#define MATRIX_COL_PINS { D1, D0, F5, F4 }
-
-/* COL2ROW or ROW2COL */
-#define DIODE_DIRECTION COL2ROW
-
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
#define LOCKING_SUPPORT_ENABLE
/* Locking resynchronize hack */
diff --git a/keyboards/handwired/numpad20/info.json b/keyboards/handwired/numpad20/info.json
index adc0abec12..fb3a11e400 100644
--- a/keyboards/handwired/numpad20/info.json
+++ b/keyboards/handwired/numpad20/info.json
@@ -8,6 +8,11 @@
"pid": "0x0504",
"device_version": "0.0.1"
},
+ "matrix_pins": {
+ "cols": ["D1", "D0", "F5", "F4"],
+ "rows": ["F6", "B1", "B3", "B6", "B5"]
+ },
+ "diode_direction": "COL2ROW",
"processor": "atmega32u4",
"bootloader": "halfkay",
"layouts": {
diff --git a/keyboards/handwired/obuwunkunubi/spaget/config.h b/keyboards/handwired/obuwunkunubi/spaget/config.h
index 6a7baeba33..55acb93cec 100644
--- a/keyboards/handwired/obuwunkunubi/spaget/config.h
+++ b/keyboards/handwired/obuwunkunubi/spaget/config.h
@@ -17,15 +17,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
#pragma once
-
-// ROWS: Top to bottom, COLS: Left to right
-
-#define MATRIX_ROW_PINS { D4, C6, D7, E6, B4, B5 }
-#define MATRIX_COL_PINS { B1, B3, B2, B6 }
-
-/* COL2ROW or ROW2COL */
-#define DIODE_DIRECTION COL2ROW
-
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
#define LOCKING_SUPPORT_ENABLE
diff --git a/keyboards/handwired/obuwunkunubi/spaget/info.json b/keyboards/handwired/obuwunkunubi/spaget/info.json
index 8a205c6794..6bec9fa163 100644
--- a/keyboards/handwired/obuwunkunubi/spaget/info.json
+++ b/keyboards/handwired/obuwunkunubi/spaget/info.json
@@ -8,6 +8,11 @@
"pid": "0x6969",
"device_version": "0.0.1"
},
+ "matrix_pins": {
+ "cols": ["B1", "B3", "B2", "B6"],
+ "rows": ["D4", "C6", "D7", "E6", "B4", "B5"]
+ },
+ "diode_direction": "COL2ROW",
"encoder": {
"rotary": [
{"pin_a": "F5", "pin_b": "F4"},
diff --git a/keyboards/handwired/oem_ansi_fullsize/config.h b/keyboards/handwired/oem_ansi_fullsize/config.h
index 5f31deab10..8906351de9 100644
--- a/keyboards/handwired/oem_ansi_fullsize/config.h
+++ b/keyboards/handwired/oem_ansi_fullsize/config.h
@@ -17,30 +17,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
#pragma once
-
-/*
- * Keyboard Matrix Assignments
- *
- * Change this to how you wired your keyboard
- * COLS: AVR pins used for columns, left to right
- * ROWS: AVR pins used for rows, top to bottom
- * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
- * ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
- *
- */
-
-#define MATRIX_ROW_PINS \
- { F5, F4, F3, F2, F1, F0 }
-// R0 R1 R2 R3 R4 R5
-
-#define MATRIX_COL_PINS \
- { C3, C2, C1, C0, E1, E0, D7, E6, D5, D4, D3, D2, D1, D0, B7, B0, B1, B2, B3, B4, B5, F6 }
-// C0 C1 C2 C3 C4 C5 C6 C7 C8 C9 CA CB CC CD CE CF CG CH CI CJ CK CL
-
-
-/* COL2ROW, ROW2COL */
-#define DIODE_DIRECTION COL2ROW
-
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
#define LOCKING_SUPPORT_ENABLE
/* Locking resynchronize hack */
diff --git a/keyboards/handwired/oem_ansi_fullsize/info.json b/keyboards/handwired/oem_ansi_fullsize/info.json
index 57a3a74df9..f22616b338 100644
--- a/keyboards/handwired/oem_ansi_fullsize/info.json
+++ b/keyboards/handwired/oem_ansi_fullsize/info.json
@@ -8,6 +8,11 @@
"pid": "0x0000",
"device_version": "0.0.1"
},
+ "matrix_pins": {
+ "cols": ["C3", "C2", "C1", "C0", "E1", "E0", "D7", "E6", "D5", "D4", "D3", "D2", "D1", "D0", "B7", "B0", "B1", "B2", "B3", "B4", "B5", "F6"],
+ "rows": ["F5", "F4", "F3", "F2", "F1", "F0"]
+ },
+ "diode_direction": "COL2ROW",
"processor": "at90usb1286",
"bootloader": "halfkay",
"community_layouts": ["fullsize_ansi"],
diff --git a/keyboards/handwired/oem_iso_fullsize/config.h b/keyboards/handwired/oem_iso_fullsize/config.h
deleted file mode 100644
index af6146110d..0000000000
--- a/keyboards/handwired/oem_iso_fullsize/config.h
+++ /dev/null
@@ -1,37 +0,0 @@
-/** Copyright 2021 andresteare
- *
- * This program is free software: you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation, either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program. If not, see <http://www.gnu.org/licenses/>.
- */
-
-#pragma once
-
-
-/*
- * Keyboard Matrix Assignments
- *
- * Change this to how you wired your keyboard
- * COLS: AVR pins used for columns, left to right
- * ROWS: AVR pins used for rows, top to bottom
- * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
- * ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
- *
- */
-#define MATRIX_ROW_PINS { C0, B4, F3, F4, F5, F6 }
-#define MATRIX_COL_PINS { C2, C1, E0, D4, D5, A4, A0, B2, B0, E7, E6, D6, B1, B3, D3, D2, B6, F7, F0, F1, F2 }
-
-#define DIODE_DIRECTION ROW2COL
-
-
-// generated by KBFirmware JSON to QMK Parser
-// https://noroadsleft.github.io/kbf_qmk_converter/
diff --git a/keyboards/handwired/oem_iso_fullsize/info.json b/keyboards/handwired/oem_iso_fullsize/info.json
index b1c5c50969..266d53ede2 100644
--- a/keyboards/handwired/oem_iso_fullsize/info.json
+++ b/keyboards/handwired/oem_iso_fullsize/info.json
@@ -8,6 +8,11 @@
"pid": "0x7070",
"device_version": "0.0.1"
},
+ "matrix_pins": {
+ "cols": ["C2", "C1", "E0", "D4", "D5", "A4", "A0", "B2", "B0", "E7", "E6", "D6", "B1", "B3", "D3", "D2", "B6", "F7", "F0", "F1", "F2"],
+ "rows": ["C0", "B4", "F3", "F4", "F5", "F6"]
+ },
+ "diode_direction": "ROW2COL",
"processor": "at90usb1286",
"bootloader": "atmel-dfu",
"layouts": {
diff --git a/keyboards/handwired/ortho5x13/config.h b/keyboards/handwired/ortho5x13/config.h
index 55782eaff1..b9449c4714 100644
--- a/keyboards/handwired/ortho5x13/config.h
+++ b/keyboards/handwired/ortho5x13/config.h
@@ -17,23 +17,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
#pragma once
-
-/*
- * Keyboard Matrix Assignments
- *
- * Change this to how you wired your keyboard
- * COLS: AVR pins used for columns, left to right
- * ROWS: AVR pins used for rows, top to bottom
- * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
- * ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
- *
-*/
-#define MATRIX_ROW_PINS { D3, D2, D1, D0, D4 }
-#define MATRIX_COL_PINS { C6, D7, E6, B4, B5, B6, B2, B3, B1, F7, F6, F5, F4 }
-
-/* COL2ROW or ROW2COL */
-#define DIODE_DIRECTION COL2ROW
-
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
#define LOCKING_SUPPORT_ENABLE
/* Locking resynchronize hack */
diff --git a/keyboards/handwired/ortho5x13/info.json b/keyboards/handwired/ortho5x13/info.json
index 6057d1e092..b15b3fa61b 100644
--- a/keyboards/handwired/ortho5x13/info.json
+++ b/keyboards/handwired/ortho5x13/info.json
@@ -8,6 +8,11 @@
"pid": "0x050D",
"device_version": "0.0.1"
},
+ "matrix_pins": {
+ "cols": ["C6", "D7", "E6", "B4", "B5", "B6", "B2", "B3", "B1", "F7", "F6", "F5", "F4"],
+ "rows": ["D3", "D2", "D1", "D0", "D4"]
+ },
+ "diode_direction": "COL2ROW",
"processor": "atmega32u4",
"bootloader": "halfkay",
"layouts": {
diff --git a/keyboards/handwired/ortho5x14/config.h b/keyboards/handwired/ortho5x14/config.h
index 92f72b4fc7..c37ac42537 100644
--- a/keyboards/handwired/ortho5x14/config.h
+++ b/keyboards/handwired/ortho5x14/config.h
@@ -17,23 +17,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
#pragma once
-
-/*
- * Keyboard Matrix Assignments
- *
- * Change this to how you wired your keyboard
- * COLS: AVR pins used for columns, left to right
- * ROWS: AVR pins used for rows, top to bottom
- * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
- * ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
- *
-*/
-#define MATRIX_ROW_PINS { F0, F1, C7, D5, B7 }
-#define MATRIX_COL_PINS { F4, F5, F6, F7, B1, B3, B2, B4, E6, D7, C6, D4, D0, D1 }
-
-/* COL2ROW or ROW2COL */
-#define DIODE_DIRECTION COL2ROW
-
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
#define LOCKING_SUPPORT_ENABLE
/* Locking resynchronize hack */
diff --git a/keyboards/handwired/ortho5x14/info.json b/keyboards/handwired/ortho5x14/info.json
index 8e657b7675..5faccec8af 100644
--- a/keyboards/handwired/ortho5x14/info.json
+++ b/keyboards/handwired/ortho5x14/info.json
@@ -8,6 +8,11 @@
"pid": "0x050D",
"device_version": "0.0.1"
},
+ "matrix_pins": {
+ "cols": ["F4", "F5", "F6", "F7", "B1", "B3", "B2", "B4", "E6", "D7", "C6", "D4", "D0", "D1"],
+ "rows": ["F0", "F1", "C7", "D5", "B7"]
+ },
+ "diode_direction": "COL2ROW",
"processor": "atmega32u4",
"bootloader": "caterina",
"layouts": {
diff --git a/keyboards/handwired/ortho_brass/config.h b/keyboards/handwired/ortho_brass/config.h
deleted file mode 100644
index 3f8e24089b..0000000000
--- a/keyboards/handwired/ortho_brass/config.h
+++ /dev/null
@@ -1,27 +0,0 @@
-/* Copyright 2021 Christoph Jabs (BifbofII)
- *
- * This program is free software: you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation, either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program. If not, see <http://www.gnu.org/licenses/>.
- */
-
-#pragma once
-
-
-/* Handwired pin-out */
-#define MATRIX_ROW_PINS \
- { D3, D2, D1, D0 }
-#define MATRIX_COL_PINS \
- { F4, F7, F5, F1, C7, F0, B1, B0, F6, B6, B2, B3 }
-
-/* COL2ROW or ROW2COL */
-#define DIODE_DIRECTION COL2ROW
diff --git a/keyboards/handwired/ortho_brass/info.json b/keyboards/handwired/ortho_brass/info.json
index c931dc327f..860d0441a4 100644
--- a/keyboards/handwired/ortho_brass/info.json
+++ b/keyboards/handwired/ortho_brass/info.json
@@ -8,6 +8,11 @@
"pid": "0x6060",
"device_version": "0.0.1"
},
+ "matrix_pins": {
+ "cols": ["F4", "F7", "F5", "F1", "C7", "F0", "B1", "B0", "F6", "B6", "B2", "B3"],
+ "rows": ["D3", "D2", "D1", "D0"]
+ },
+ "diode_direction": "COL2ROW",
"processor": "atmega32u4",
"bootloader": "qmk-dfu",
"community_layouts": ["ortho_4x12"],
diff --git a/keyboards/handwired/p65rgb/config.h b/keyboards/handwired/p65rgb/config.h
index a3693706d4..ced8197ddb 100644
--- a/keyboards/handwired/p65rgb/config.h
+++ b/keyboards/handwired/p65rgb/config.h
@@ -17,14 +17,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
#pragma once
-
-/* key matrix pins */
-#define MATRIX_ROW_PINS { C7, C6, B6, B5, D5 }
-#define MATRIX_COL_PINS { E6, F0, F1, F4, F5, F6, F7, B0, B1, B2, B3, B7, D0, D1, D2, D3, D7 }
-
-/* COL2ROW, ROW2COL*/
-#define DIODE_DIRECTION COL2ROW
-
#define RGB_DI_PIN B4
#define RGB_DISABLE_WHEN_USB_SUSPENDED // turn off effects when suspended
#define RGB_MATRIX_KEYPRESSES
diff --git a/keyboards/handwired/p65rgb/info.json b/keyboards/handwired/p65rgb/info.json
index 316fa0f61d..82e433527a 100644
--- a/keyboards/handwired/p65rgb/info.json
+++ b/keyboards/handwired/p65rgb/info.json
@@ -8,6 +8,11 @@
"pid": "0x75B4",
"device_version": "0.0.1"
},
+ "matrix_pins": {
+ "cols": ["E6", "F0", "F1", "F4", "F5", "F6", "F7", "B0", "B1", "B2", "B3", "B7", "D0", "D1", "D2", "D3", "D7"],
+ "rows": ["C7", "C6", "B6", "B5", "D5"]
+ },
+ "diode_direction": "COL2ROW",
"qmk_lufa_bootloader": {
"esc_input": "C7",
"esc_output": "E6"
diff --git a/keyboards/handwired/pilcrow/config.h b/keyboards/handwired/pilcrow/config.h
index 8ae32975fe..b9449c4714 100644
--- a/keyboards/handwired/pilcrow/config.h
+++ b/keyboards/handwired/pilcrow/config.h
@@ -17,23 +17,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
#pragma once
-
-/*
- * Keyboard Matrix Assignments
- *
- * Change this to how you wired your keyboard
- * COLS: AVR pins used for columns, left to right
- * ROWS: AVR pins used for rows, top to bottom
- * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
- * ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
- *
-*/
-#define MATRIX_ROW_PINS { B4, F7, B1, B3 }
-#define MATRIX_COL_PINS { D4, C6, D7, E6, F5, F6, B6, B2, F4, B5}
-
-/* COL2ROW or ROW2COL */
-#define DIODE_DIRECTION COL2ROW
-
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
#define LOCKING_SUPPORT_ENABLE
/* Locking resynchronize hack */
diff --git a/keyboards/handwired/pilcrow/info.json b/keyboards/handwired/pilcrow/info.json
index 2c05b74a36..28bb690c3c 100644
--- a/keyboards/handwired/pilcrow/info.json
+++ b/keyboards/handwired/pilcrow/info.json
@@ -8,6 +8,11 @@
"pid": "0x6060",
"device_version": "0.0.1"
},
+ "matrix_pins": {
+ "cols": ["D4", "C6", "D7", "E6", "F5", "F6", "B6", "B2", "F4", "B5"],
+ "rows": ["B4", "F7", "B1", "B3"]
+ },
+ "diode_direction": "COL2ROW",
"processor": "atmega32u4",
"bootloader": "halfkay",
"layouts": {
diff --git a/keyboards/handwired/pill60/blackpill_f401/config.h b/keyboards/handwired/pill60/blackpill_f401/config.h
deleted file mode 100644
index 7de8654319..0000000000
--- a/keyboards/handwired/pill60/blackpill_f401/config.h
+++ /dev/null
@@ -1,22 +0,0 @@
-/* Copyright 2019
- *
- * This program is free software: you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation, either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program. If not, see <http://www.gnu.org/licenses/>.
- */
-
-#pragma once
-
-#define MATRIX_COL_PINS \
- { A8, B2, B1, B15, A10, A0, A1, A2, A3, A4, A5, A6, A7, B0 }
-#define MATRIX_ROW_PINS \
- { B4, B3, A15, B13, B5 }
diff --git a/keyboards/handwired/pill60/blackpill_f401/info.json b/keyboards/handwired/pill60/blackpill_f401/info.json
index acd7e83f77..8d85a2e930 100644
--- a/keyboards/handwired/pill60/blackpill_f401/info.json
+++ b/keyboards/handwired/pill60/blackpill_f401/info.json
@@ -1,4 +1,9 @@
{
+ "matrix_pins": {
+ "cols": ["A8", "B2", "B1", "B15", "A10", "A0", "A1", "A2", "A3", "A4", "A5", "A6", "A7", "B0"],
+ "rows": ["B4", "B3", "A15", "B13", "B5"]
+ },
+ "diode_direction": "COL2ROW",
"processor": "STM32F401",
"bootloader": "stm32-dfu",
"board": "BLACKPILL_STM32_F401"
diff --git a/keyboards/handwired/pill60/blackpill_f411/config.h b/keyboards/handwired/pill60/blackpill_f411/config.h
deleted file mode 100644
index 7de8654319..0000000000
--- a/keyboards/handwired/pill60/blackpill_f411/config.h
+++ /dev/null
@@ -1,22 +0,0 @@
-/* Copyright 2019
- *
- * This program is free software: you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation, either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program. If not, see <http://www.gnu.org/licenses/>.
- */
-
-#pragma once
-
-#define MATRIX_COL_PINS \
- { A8, B2, B1, B15, A10, A0, A1, A2, A3, A4, A5, A6, A7, B0 }
-#define MATRIX_ROW_PINS \
- { B4, B3, A15, B13, B5 }
diff --git a/keyboards/handwired/pill60/blackpill_f411/info.json b/keyboards/handwired/pill60/blackpill_f411/info.json
index 2517a82403..4e0935f79c 100644
--- a/keyboards/handwired/pill60/blackpill_f411/info.json
+++ b/keyboards/handwired/pill60/blackpill_f411/info.json
@@ -1,4 +1,9 @@
{
+ "matrix_pins": {
+ "cols": ["A8", "B2", "B1", "B15", "A10", "A0", "A1", "A2", "A3", "A4", "A5", "A6", "A7", "B0"],
+ "rows": ["B4", "B3", "A15", "B13", "B5"]
+ },
+ "diode_direction": "COL2ROW",
"processor": "STM32F411",
"bootloader": "stm32-dfu",
"board": "BLACKPILL_STM32_F411"
diff --git a/keyboards/handwired/pill60/bluepill/config.h b/keyboards/handwired/pill60/bluepill/config.h
deleted file mode 100644
index 1ba5ff2069..0000000000
--- a/keyboards/handwired/pill60/bluepill/config.h
+++ /dev/null
@@ -1,22 +0,0 @@
-/* Copyright 2019
- *
- * This program is free software: you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation, either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program. If not, see <http://www.gnu.org/licenses/>.
- */
-
-#pragma once
-
-#define MATRIX_COL_PINS \
- { A8, B11, B10, B15, A10, A1, A2, A3, A4, A5, A6, A7, B0, B1 }
-#define MATRIX_ROW_PINS \
- { B4, B3, A15, B13, B5 }
diff --git a/keyboards/handwired/pill60/bluepill/info.json b/keyboards/handwired/pill60/bluepill/info.json
index cf993be247..028b1d89d8 100644
--- a/keyboards/handwired/pill60/bluepill/info.json
+++ b/keyboards/handwired/pill60/bluepill/info.json
@@ -1,4 +1,9 @@
{
+ "matrix_pins": {
+ "cols": ["A8", "B11", "B10", "B15", "A10", "A1", "A2", "A3", "A4", "A5", "A6", "A7", "B0", "B1"],
+ "rows": ["B4", "B3", "A15", "B13", "B5"]
+ },
+ "diode_direction": "COL2ROW",
"processor": "STM32F103",
"bootloader": "stm32duino"
}
diff --git a/keyboards/handwired/pill60/config.h b/keyboards/handwired/pill60/config.h
index e96fba1db8..399d0f2212 100644
--- a/keyboards/handwired/pill60/config.h
+++ b/keyboards/handwired/pill60/config.h
@@ -15,8 +15,5 @@
*/
#pragma once
-
-#define DIODE_DIRECTION COL2ROW
-
#define BACKLIGHT_PWM_DRIVER PWMD5
#define BACKLIGHT_PWM_CHANNEL 1
diff --git a/keyboards/handwired/postageboard/mini/config.h b/keyboards/handwired/postageboard/mini/config.h
index b9a34e1414..091cb7b510 100644
--- a/keyboards/handwired/postageboard/mini/config.h
+++ b/keyboards/handwired/postageboard/mini/config.h
@@ -17,23 +17,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
#pragma once
-
-/*
- * Keyboard Matrix Assignments
- *
- * Change this to how you wired your keyboard
- * COLS: AVR pins used for columns, left to right
- * ROWS: AVR pins used for rows, top to bottom
- * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
- * ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
- *
- */
-#define MATRIX_ROW_PINS { D5 }
-#define MATRIX_COL_PINS { E6, B3, B7 }
-
-/* COL2ROW, ROW2COL*/
-#define DIODE_DIRECTION COL2ROW
-
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
#define LOCKING_SUPPORT_ENABLE
/* Locking resynchronize hack */
diff --git a/keyboards/handwired/postageboard/mini/info.json b/keyboards/handwired/postageboard/mini/info.json
index 65be217368..b6944f2916 100644
--- a/keyboards/handwired/postageboard/mini/info.json
+++ b/keyboards/handwired/postageboard/mini/info.json
@@ -2,6 +2,11 @@
"usb": {
"device_version": "0.0.2"
},
+ "matrix_pins": {
+ "cols": ["E6", "B3", "B7"],
+ "rows": ["D5"]
+ },
+ "diode_direction": "COL2ROW",
"processor": "atmega32u4",
"bootloader": "atmel-dfu"
}
diff --git a/keyboards/handwired/postageboard/r1/config.h b/keyboards/handwired/postageboard/r1/config.h
index 68c6dc0281..091cb7b510 100644
--- a/keyboards/handwired/postageboard/r1/config.h
+++ b/keyboards/handwired/postageboard/r1/config.h
@@ -17,23 +17,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
#pragma once
-
-/*
- * Keyboard Matrix Assignments
- *
- * Change this to how you wired your keyboard
- * COLS: AVR pins used for columns, left to right
- * ROWS: AVR pins used for rows, top to bottom
- * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
- * ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
- *
- */
-#define MATRIX_ROW_PINS { B6 }
-#define MATRIX_COL_PINS { B7, C6, C7 }
-
-/* COL2ROW, ROW2COL*/
-#define DIODE_DIRECTION COL2ROW
-
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
#define LOCKING_SUPPORT_ENABLE
/* Locking resynchronize hack */
diff --git a/keyboards/handwired/postageboard/r1/info.json b/keyboards/handwired/postageboard/r1/info.json
index dab37baf04..a1ea87df86 100644
--- a/keyboards/handwired/postageboard/r1/info.json
+++ b/keyboards/handwired/postageboard/r1/info.json
@@ -2,6 +2,11 @@
"usb": {
"device_version": "0.0.1"
},
+ "matrix_pins": {
+ "cols": ["B7", "C6", "C7"],
+ "rows": ["B6"]
+ },
+ "diode_direction": "COL2ROW",
"processor": "atmega32u4",
"bootloader": "atmel-dfu"
}
diff --git a/keyboards/handwired/prime_exl/config.h b/keyboards/handwired/prime_exl/config.h
index c4d0c8a8a2..8f57ec2b91 100644
--- a/keyboards/handwired/prime_exl/config.h
+++ b/keyboards/handwired/prime_exl/config.h
@@ -17,14 +17,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
#pragma once
-
-/* Keyboard Matrix Assignments */
-#define MATRIX_ROW_PINS { B1, E6, D5, D6, B4, D7, D4, F1, F0, B0 }
-#define MATRIX_COL_PINS { D0, B3, B2, D1, D2, D3, F7, F6, F5 }
-
-/* COL2ROW, ROW2COL*/
-#define DIODE_DIRECTION COL2ROW
-
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
#define LOCKING_SUPPORT_ENABLE
/* Locking resynchronize hack */
diff --git a/keyboards/handwired/prime_exl/info.json b/keyboards/handwired/prime_exl/info.json
index e8409b78d7..01516ed006 100644
--- a/keyboards/handwired/prime_exl/info.json
+++ b/keyboards/handwired/prime_exl/info.json
@@ -8,6 +8,11 @@
"pid": "0x6578",
"device_version": "0.0.1"
},
+ "matrix_pins": {
+ "cols": ["D0", "B3", "B2", "D1", "D2", "D3", "F7", "F6", "F5"],
+ "rows": ["B1", "E6", "D5", "D6", "B4", "D7", "D4", "F1", "F0", "B0"]
+ },
+ "diode_direction": "COL2ROW",
"backlight": {
"pin": "B7",
"levels": 5
diff --git a/keyboards/handwired/prime_exl_plus/config.h b/keyboards/handwired/prime_exl_plus/config.h
index 935d12bedb..1b683fdce9 100644
--- a/keyboards/handwired/prime_exl_plus/config.h
+++ b/keyboards/handwired/prime_exl_plus/config.h
@@ -17,14 +17,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
#pragma once
-
-/* Keyboard Matrix Assignments */
-#define MATRIX_ROW_PINS { D2, D6, B4, F1, E6, F0, F4, B5, D7, D3 }
-#define MATRIX_COL_PINS { F5, F6, F7, C7, C6, B6, B7, B3, D1, D0 }
-
-/* COL2ROW, ROW2COL*/
-#define DIODE_DIRECTION COL2ROW
-
#define RGB_DI_PIN D4
#define RGBLED_NUM 10
#define RGBLIGHT_EFFECT_BREATHING
diff --git a/keyboards/handwired/prime_exl_plus/info.json b/keyboards/handwired/prime_exl_plus/info.json
index 0114de4c26..0d6d19bf5a 100644
--- a/keyboards/handwired/prime_exl_plus/info.json
+++ b/keyboards/handwired/prime_exl_plus/info.json
@@ -8,6 +8,11 @@
"pid": "0x6579",
"device_version": "0.0.1"
},
+ "matrix_pins": {
+ "cols": ["F5", "F6", "F7", "C7", "C6", "B6", "B7", "B3", "D1", "D0"],
+ "rows": ["D2", "D6", "B4", "F1", "E6", "F0", "F4", "B5", "D7", "D3"]
+ },
+ "diode_direction": "COL2ROW",
"processor": "atmega32u4",
"bootloader": "atmel-dfu",
"layouts": {
diff --git a/keyboards/handwired/prkl30/feather/config.h b/keyboards/handwired/prkl30/feather/config.h
index a1b7295e32..f8d36fe894 100644
--- a/keyboards/handwired/prkl30/feather/config.h
+++ b/keyboards/handwired/prkl30/feather/config.h
@@ -15,12 +15,6 @@
*/
#pragma once
-/* PRKL30 feather pinout */
-#define MATRIX_ROW_PINS { F4, F1, F0, D2}
-#define MATRIX_COL_PINS { D3, D1, B7, D6, C7, B6, B5, D7, C6, D0}
-/* COL2ROW, ROW2COL*/
-#define DIODE_DIRECTION COL2ROW
-
/* RGB Light Configuration */
#define RGB_DI_PIN D1
diff --git a/keyboards/handwired/prkl30/feather/info.json b/keyboards/handwired/prkl30/feather/info.json
index 8078ee0481..5a3e21d8f1 100644
--- a/keyboards/handwired/prkl30/feather/info.json
+++ b/keyboards/handwired/prkl30/feather/info.json
@@ -1,4 +1,9 @@
{
+ "matrix_pins": {
+ "cols": ["D3", "D1", "B7", "D6", "C7", "B6", "B5", "D7", "C6", "D0"],
+ "rows": ["F4", "F1", "F0", "D2"]
+ },
+ "diode_direction": "COL2ROW",
"encoder": {
"rotary": [
{"pin_a": "F7", "pin_b": "F6"}
diff --git a/keyboards/handwired/prkl30/promicro/config.h b/keyboards/handwired/prkl30/promicro/config.h
index c3767088c7..f8d36fe894 100644
--- a/keyboards/handwired/prkl30/promicro/config.h
+++ b/keyboards/handwired/prkl30/promicro/config.h
@@ -15,12 +15,6 @@
*/
#pragma once
-/* prkl30 default pinout */
-#define MATRIX_ROW_PINS { D4, C6, D7, E6 }
-#define MATRIX_COL_PINS { B4, B5, F6, F5, F4, F7, B1, B3, B2, B6}
-/* COL2ROW, ROW2COL*/
-#define DIODE_DIRECTION COL2ROW
-
/* RGB Light Configuration */
#define RGB_DI_PIN D1
diff --git a/keyboards/handwired/prkl30/promicro/info.json b/keyboards/handwired/prkl30/promicro/info.json
index a7ca847765..ddec0f8eeb 100644
--- a/keyboards/handwired/prkl30/promicro/info.json
+++ b/keyboards/handwired/prkl30/promicro/info.json
@@ -1,4 +1,9 @@
{
+ "matrix_pins": {
+ "cols": ["B4", "B5", "F6", "F5", "F4", "F7", "B1", "B3", "B2", "B6"],
+ "rows": ["D4", "C6", "D7", "E6"]
+ },
+ "diode_direction": "COL2ROW",
"encoder": {
"rotary": [
{"pin_a": "D3", "pin_b": "D2"}
diff --git a/keyboards/handwired/pteron/config.h b/keyboards/handwired/pteron/config.h
deleted file mode 100644
index 61e8611e24..0000000000
--- a/keyboards/handwired/pteron/config.h
+++ /dev/null
@@ -1,9 +0,0 @@
-#pragma once
-
-
-/* key matrix pins */
-#define MATRIX_ROW_PINS { D7, E6, B4, B5, B6 }
-#define MATRIX_COL_PINS { F4, F6, F5, F7, B1, B3, C6, D4, D0, D1, D2, D3 }
-
-/* COL2ROW or ROW2COL */
-#define DIODE_DIRECTION ROW2COL
diff --git a/keyboards/handwired/pteron/info.json b/keyboards/handwired/pteron/info.json
index b21d12c9f9..94dbc9dcfc 100644
--- a/keyboards/handwired/pteron/info.json
+++ b/keyboards/handwired/pteron/info.json
@@ -8,6 +8,11 @@
"pid": "0x6060",
"device_version": "0.0.1"
},
+ "matrix_pins": {
+ "cols": ["F4", "F6", "F5", "F7", "B1", "B3", "C6", "D4", "D0", "D1", "D2", "D3"],
+ "rows": ["D7", "E6", "B4", "B5", "B6"]
+ },
+ "diode_direction": "ROW2COL",
"processor": "atmega32u4",
"bootloader": "caterina",
"layouts": {
diff --git a/keyboards/handwired/pteron38/config.h b/keyboards/handwired/pteron38/config.h
deleted file mode 100644
index f5b0230911..0000000000
--- a/keyboards/handwired/pteron38/config.h
+++ /dev/null
@@ -1,25 +0,0 @@
-/* Copyright 2020 Fidel Coria
- *
- * This program is free software: you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation, either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program. If not, see <http://www.gnu.org/licenses/>.
- */
-
-#pragma once
-
-
-/* key matrix pins */
-#define MATRIX_ROW_PINS { E6, B4, B5, B6 }
-#define MATRIX_COL_PINS { F6, F5, F7, B1, B3, C6, D4, D0, D1, D2 }
-
-/* COL2ROW or ROW2COL */
-#define DIODE_DIRECTION COL2ROW
diff --git a/keyboards/handwired/pteron38/info.json b/keyboards/handwired/pteron38/info.json
index a2ea58d57a..63eef29a9d 100644
--- a/keyboards/handwired/pteron38/info.json
+++ b/keyboards/handwired/pteron38/info.json
@@ -8,6 +8,11 @@
"pid": "0x6060",
"device_version": "0.0.1"
},
+ "matrix_pins": {
+ "cols": ["F6", "F5", "F7", "B1", "B3", "C6", "D4", "D0", "D1", "D2"],
+ "rows": ["E6", "B4", "B5", "B6"]
+ },
+ "diode_direction": "COL2ROW",
"processor": "atmega32u4",
"bootloader": "atmel-dfu",
"layouts": {
diff --git a/keyboards/handwired/pteron44/config.h b/keyboards/handwired/pteron44/config.h
deleted file mode 100644
index 6429437f97..0000000000
--- a/keyboards/handwired/pteron44/config.h
+++ /dev/null
@@ -1,25 +0,0 @@
-/* Copyright 2020 Fidel Coria
- *
- * This program is free software: you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation, either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program. If not, see <http://www.gnu.org/licenses/>.
- */
-
-#pragma once
-
-
-/* key matrix pins */
-#define MATRIX_ROW_PINS { E6, B4, B5, B6 }
-#define MATRIX_COL_PINS { F4, F6, F5, F7, B1, B3, C6, D4, D0, D1, D2, D3 }
-
-/* COL2ROW or ROW2COL */
-#define DIODE_DIRECTION COL2ROW
diff --git a/keyboards/handwired/pteron44/info.json b/keyboards/handwired/pteron44/info.json
index 23b4ac785a..86971c4202 100644
--- a/keyboards/handwired/pteron44/info.json
+++ b/keyboards/handwired/pteron44/info.json
@@ -8,6 +8,11 @@
"pid": "0x542C",
"device_version": "0.0.1"
},
+ "matrix_pins": {
+ "cols": ["F4", "F6", "F5", "F7", "B1", "B3", "C6", "D4", "D0", "D1", "D2", "D3"],
+ "rows": ["E6", "B4", "B5", "B6"]
+ },
+ "diode_direction": "COL2ROW",
"processor": "atmega32u4",
"bootloader": "atmel-dfu",
"layouts": {
diff --git a/keyboards/handwired/qc60/config.h b/keyboards/handwired/qc60/config.h
deleted file mode 100644
index 6f70f09bee..0000000000
--- a/keyboards/handwired/qc60/config.h
+++ /dev/null
@@ -1 +0,0 @@
-#pragma once
diff --git a/keyboards/handwired/qc60/info.json b/keyboards/handwired/qc60/info.json
index e36142dea8..2d65522a5d 100644
--- a/keyboards/handwired/qc60/info.json
+++ b/keyboards/handwired/qc60/info.json
@@ -8,6 +8,11 @@
"pid": "0x0C60",
"device_version": "1.0.0"
},
+ "matrix_pins": {
+ "cols": ["F7", "F6", "B1", "B3", "B2", "B6", "B5", "B4"],
+ "rows": ["F4", "F5", "C6", "D7", "E6"]
+ },
+ "diode_direction": "ROW2COL",
"split": {
"soft_serial_pin": "D0"
},
diff --git a/keyboards/handwired/qc60/proto/config.h b/keyboards/handwired/qc60/proto/config.h
index 2e7d2f3b9b..209a5ea30d 100644
--- a/keyboards/handwired/qc60/proto/config.h
+++ b/keyboards/handwired/qc60/proto/config.h
@@ -1,11 +1,5 @@
#pragma once
-
-// wiring of each half
-#define MATRIX_ROW_PINS { F4, F5, C6, D7, E6 }
-#define MATRIX_COL_PINS { F7, F6, B1, B3, B2, B6, B5, B4 }
-#define DIODE_DIRECTION ROW2COL
-
/* ws2812 RGB LED */
#define RGB_DI_PIN D3
#define RGBLED_NUM 1 // Number of LEDs
diff --git a/keyboards/handwired/retro_refit/config.h b/keyboards/handwired/retro_refit/config.h
index a08c558a1a..3dc99447ee 100644
--- a/keyboards/handwired/retro_refit/config.h
+++ b/keyboards/handwired/retro_refit/config.h
@@ -17,14 +17,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
#pragma once
-
-// See note in retro_refit.h for an explanation of how this matrix is wired up
-#define MATRIX_ROW_PINS { D4, D7, B4, B5, B6, F7, F6, F5, F4, F1, F0 }
-#define MATRIX_COL_PINS { B0, B1, B2, B3, D2, D3, C7, D5 }
-
-/* COL2ROW or ROW2COL */
-#define DIODE_DIRECTION COL2ROW
-
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
#define LOCKING_SUPPORT_ENABLE
/* Locking resynchronize hack */
diff --git a/keyboards/handwired/retro_refit/info.json b/keyboards/handwired/retro_refit/info.json
index a04b54cf95..cd7e8c1115 100644
--- a/keyboards/handwired/retro_refit/info.json
+++ b/keyboards/handwired/retro_refit/info.json
@@ -8,6 +8,11 @@
"pid": "0x6060",
"device_version": "0.0.1"
},
+ "matrix_pins": {
+ "cols": ["B0", "B1", "B2", "B3", "D2", "D3", "C7", "D5"],
+ "rows": ["D4", "D7", "B4", "B5", "B6", "F7", "F6", "F5", "F4", "F1", "F0"]
+ },
+ "diode_direction": "COL2ROW",
"processor": "atmega32u4",
"bootloader": "halfkay",
"layouts": {
diff --git a/keyboards/handwired/riblee_f401/config.h b/keyboards/handwired/riblee_f401/config.h
index 2cee851436..09a304e1c7 100644
--- a/keyboards/handwired/riblee_f401/config.h
+++ b/keyboards/handwired/riblee_f401/config.h
@@ -16,12 +16,6 @@
#pragma once
-
-#define MATRIX_ROW_PINS { A6, A5, A4, A3, A2 }
-#define MATRIX_COL_PINS { B10, B1, B0, B15, A8, B3, B4, B5, B6, B7, B8, B9 }
-
-#define DIODE_DIRECTION COL2ROW
-
#define MOUSEKEY_INTERVAL 32
#define TAPPING_TERM 175 \ No newline at end of file
diff --git a/keyboards/handwired/riblee_f401/info.json b/keyboards/handwired/riblee_f401/info.json
index 94cc2c35f2..60cfdb9d3b 100644
--- a/keyboards/handwired/riblee_f401/info.json
+++ b/keyboards/handwired/riblee_f401/info.json
@@ -8,6 +8,11 @@
"pid": "0x002A",
"device_version": "0.0.1"
},
+ "matrix_pins": {
+ "cols": ["B10", "B1", "B0", "B15", "A8", "B3", "B4", "B5", "B6", "B7", "B8", "B9"],
+ "rows": ["A6", "A5", "A4", "A3", "A2"]
+ },
+ "diode_direction": "COL2ROW",
"backlight": {
"driver": "software",
"pin": "A0",
diff --git a/keyboards/handwired/riblee_f411/config.h b/keyboards/handwired/riblee_f411/config.h
index 395e35d913..425b35f266 100644
--- a/keyboards/handwired/riblee_f411/config.h
+++ b/keyboards/handwired/riblee_f411/config.h
@@ -16,12 +16,6 @@
#pragma once
-
-#define MATRIX_ROW_PINS { A6, A5, A4, A3, A2 }
-#define MATRIX_COL_PINS { B10, B1, B0, B15, A8, B3, B4, B5, B14, A0, B8, B9 }
-
-#define DIODE_DIRECTION COL2ROW
-
#define MOUSEKEY_INTERVAL 32
#define TAPPING_TERM 175
diff --git a/keyboards/handwired/riblee_f411/info.json b/keyboards/handwired/riblee_f411/info.json
index 4941f56752..3a4c78b948 100644
--- a/keyboards/handwired/riblee_f411/info.json
+++ b/keyboards/handwired/riblee_f411/info.json
@@ -8,6 +8,11 @@
"pid": "0x002B",
"device_version": "0.0.1"
},
+ "matrix_pins": {
+ "cols": ["B10", "B1", "B0", "B15", "A8", "B3", "B4", "B5", "B14", "A0", "B8", "B9"],
+ "rows": ["A6", "A5", "A4", "A3", "A2"]
+ },
+ "diode_direction": "COL2ROW",
"processor": "STM32F411",
"bootloader": "stm32-dfu",
"board": "BLACKPILL_STM32_F411",
diff --git a/keyboards/handwired/rs60/config.h b/keyboards/handwired/rs60/config.h
index b9bf17a4a0..fb1ac6044d 100644
--- a/keyboards/handwired/rs60/config.h
+++ b/keyboards/handwired/rs60/config.h
@@ -16,13 +16,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
#pragma once
-/* key matrix pins */
-#define MATRIX_ROW_PINS { B5, B6, B4, B2, E6 }
-#define MATRIX_COL_PINS { C6, D4, D0, D1, D2, D3, F4, F5, F6, F7, B1, B3}
-
-/* COL2ROW or ROW2COL */
-#define DIODE_DIRECTION COL2ROW
-
/* key combination for command */
#define IS_COMMAND() ( \
false \
diff --git a/keyboards/handwired/rs60/info.json b/keyboards/handwired/rs60/info.json
index ddd2cff353..4269af4173 100644
--- a/keyboards/handwired/rs60/info.json
+++ b/keyboards/handwired/rs60/info.json
@@ -8,6 +8,11 @@
"pid": "0x4260",
"device_version": "0.0.1"
},
+ "matrix_pins": {
+ "cols": ["C6", "D4", "D0", "D1", "D2", "D3", "F4", "F5", "F6", "F7", "B1", "B3"],
+ "rows": ["B5", "B6", "B4", "B2", "E6"]
+ },
+ "diode_direction": "COL2ROW",
"qmk_lufa_bootloader": {
"esc_input": "B4",
"esc_output": "C6",
diff --git a/keyboards/handwired/selene/config.h b/keyboards/handwired/selene/config.h
index f0b09a2a7f..c346b07623 100644
--- a/keyboards/handwired/selene/config.h
+++ b/keyboards/handwired/selene/config.h
@@ -16,15 +16,8 @@
#pragma once
-
-#define MATRIX_ROW_PINS { B10, B9, B15, B14, B13, B8}
-#define MATRIX_COL_PINS { A9, A10, B11, B7, B6, B5, B4, B3, B2, B1, B0, C14, A4, A5, A6, A7, A8, A15, A13, A14, B12 }
#define RGB_DI_PIN A3
#define RGBLED_NUM 50
-
-/* COL2ROW or ROW2COL */
-#define DIODE_DIRECTION COL2ROW
-
#define LOCKING_SUPPORT_ENABLE
#define LOCKING_RESYNC_ENABLE
diff --git a/keyboards/handwired/selene/info.json b/keyboards/handwired/selene/info.json
index c798895e86..2ce960ed20 100644
--- a/keyboards/handwired/selene/info.json
+++ b/keyboards/handwired/selene/info.json
@@ -8,6 +8,11 @@
"pid": "0x0001",
"device_version": "0.0.1"
},
+ "matrix_pins": {
+ "cols": ["A9", "A10", "B11", "B7", "B6", "B5", "B4", "B3", "B2", "B1", "B0", "C14", "A4", "A5", "A6", "A7", "A8", "A15", "A13", "A14", "B12"],
+ "rows": ["B10", "B9", "B15", "B14", "B13", "B8"]
+ },
+ "diode_direction": "COL2ROW",
"processor": "STM32F303",
"bootloader": "stm32-dfu",
"board": "QMK_PROTON_C",
diff --git a/keyboards/handwired/sick68/config.h b/keyboards/handwired/sick68/config.h
index 018fb3cd48..ee4bc0e70c 100644
--- a/keyboards/handwired/sick68/config.h
+++ b/keyboards/handwired/sick68/config.h
@@ -17,25 +17,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
#pragma once
-
-/*
- * Keyboard Matrix Assignments
- *
- * Change this to how you wired your keyboard
- * COLS: AVR pins used for columns, left to right
- * ROWS: AVR pins used for rows, top to bottom
- * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
- * ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
- *
- */
-#define MATRIX_ROW_PINS \
- { D3, D2, D1, D0, D4 }
-#define MATRIX_COL_PINS \
- { C6, D7, E6, B4, B5, B0, D5, B6, B2, B3, B1, F7, F6, F5, F4 }
-
-/* COL2ROW, ROW2COL*/
-#define DIODE_DIRECTION COL2ROW
-
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
#define LOCKING_SUPPORT_ENABLE
/* Locking resynchronize hack */
diff --git a/keyboards/handwired/sick68/info.json b/keyboards/handwired/sick68/info.json
index eb99897023..53ee2f7ee5 100644
--- a/keyboards/handwired/sick68/info.json
+++ b/keyboards/handwired/sick68/info.json
@@ -8,6 +8,11 @@
"pid": "0x5F00",
"device_version": "0.0.1"
},
+ "matrix_pins": {
+ "cols": ["C6", "D7", "E6", "B4", "B5", "B0", "D5", "B6", "B2", "B3", "B1", "F7", "F6", "F5", "F4"],
+ "rows": ["D3", "D2", "D1", "D0", "D4"]
+ },
+ "diode_direction": "COL2ROW",
"processor": "atmega32u4",
"bootloader": "caterina",
"community_layouts": ["65_ansi"],
diff --git a/keyboards/handwired/sick_pad/config.h b/keyboards/handwired/sick_pad/config.h
index e27980a0eb..ee1c244658 100644
--- a/keyboards/handwired/sick_pad/config.h
+++ b/keyboards/handwired/sick_pad/config.h
@@ -16,14 +16,6 @@
#pragma once
-
-/* key matrix pins */
-#define MATRIX_ROW_PINS { B0, B1, B2, B3, B4 }
-#define MATRIX_COL_PINS { B9, B15, B14, B13 }
-
-/* COL2ROW or ROW2COL */
-#define DIODE_DIRECTION COL2ROW
-
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
#define LOCKING_SUPPORT_ENABLE
diff --git a/keyboards/handwired/sick_pad/info.json b/keyboards/handwired/sick_pad/info.json
index 2a5f85ad68..8ba6353c99 100644
--- a/keyboards/handwired/sick_pad/info.json
+++ b/keyboards/handwired/sick_pad/info.json
@@ -8,6 +8,11 @@
"pid": "0xDA20",
"device_version": "0.0.1"
},
+ "matrix_pins": {
+ "cols": ["B9", "B15", "B14", "B13"],
+ "rows": ["B0", "B1", "B2", "B3", "B4"]
+ },
+ "diode_direction": "COL2ROW",
"processor": "STM32F303",
"bootloader": "stm32-dfu",
"board": "QMK_PROTON_C",
diff --git a/keyboards/handwired/skakunm_dactyl/config.h b/keyboards/handwired/skakunm_dactyl/config.h
index 2e01a71d28..3e57cd2e76 100644
--- a/keyboards/handwired/skakunm_dactyl/config.h
+++ b/keyboards/handwired/skakunm_dactyl/config.h
@@ -4,13 +4,6 @@
#pragma once
-
-// wiring of each half
-#define MATRIX_COL_PINS { C6, D7, E6, B4, B5 }
-#define MATRIX_ROW_PINS { B1, B3, B2, B6 }
-
-#define DIODE_DIRECTION COL2ROW
-
/* mouse config */
#define MOUSEKEY_INTERVAL 20
#define MOUSEKEY_DELAY 0
diff --git a/keyboards/handwired/skakunm_dactyl/info.json b/keyboards/handwired/skakunm_dactyl/info.json
index a38c564091..468dbf8494 100644
--- a/keyboards/handwired/skakunm_dactyl/info.json
+++ b/keyboards/handwired/skakunm_dactyl/info.json
@@ -8,6 +8,11 @@
"pid": "0x3060",
"device_version": "0.0.1"
},
+ "matrix_pins": {
+ "cols": ["C6", "D7", "E6", "B4", "B5"],
+ "rows": ["B1", "B3", "B2", "B6"]
+ },
+ "diode_direction": "COL2ROW",
"split": {
"soft_serial_pin": "D0"
},
diff --git a/keyboards/handwired/slash/config.h b/keyboards/handwired/slash/config.h
index ffa31f3c7a..bde67936ea 100644
--- a/keyboards/handwired/slash/config.h
+++ b/keyboards/handwired/slash/config.h
@@ -17,22 +17,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
#pragma once
-
-/*
- * Keyboard Matrix Assignments
- *
- * Change this to how you wired your keyboard
- * COLS: AVR pins used for columns, left to right
- * ROWS: AVR pins used for rows, top to bottom
- * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
- * ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
- *
- */
-#define MATRIX_ROW_PINS { C7, D6, B7, B6, B5, D7, C6, D0 }
-#define MATRIX_COL_PINS { D2, F0, F1, F4, F5, F6, F7, D3 }
-/* COL2ROW, ROW2COL*/
-#define DIODE_DIRECTION COL2ROW
-
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
#define LOCKING_SUPPORT_ENABLE
/* Locking resynchronize hack */
diff --git a/keyboards/handwired/slash/info.json b/keyboards/handwired/slash/info.json
index b272ff1ed2..ffd76babc1 100644
--- a/keyboards/handwired/slash/info.json
+++ b/keyboards/handwired/slash/info.json
@@ -8,6 +8,11 @@
"pid": "0x0000",
"device_version": "0.0.1"
},
+ "matrix_pins": {
+ "cols": ["D2", "F0", "F1", "F4", "F5", "F6", "F7", "D3"],
+ "rows": ["C7", "D6", "B7", "B6", "B5", "D7", "C6", "D0"]
+ },
+ "diode_direction": "COL2ROW",
"processor": "atmega32u4",
"bootloader": "caterina",
"layouts": {
diff --git a/keyboards/handwired/snatchpad/config.h b/keyboards/handwired/snatchpad/config.h
index 57d303a983..4dee4933a8 100644
--- a/keyboards/handwired/snatchpad/config.h
+++ b/keyboards/handwired/snatchpad/config.h
@@ -3,23 +3,6 @@
#pragma once
-
-/*
- * Keyboard Matrix Assignments
- *
- * Change this to how you wired your keyboards
- * COLS: AVR pins used for columns, left to right
- * ROWS: AVR pins used for rows, top to bottom
- * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
- * ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
- *
- */
-#define MATRIX_ROW_PINS { F4, F5, F6 }
-#define MATRIX_COL_PINS { B1, B3, B2 }
-
-/* COL2ROW, ROW2COL */
-#define DIODE_DIRECTION COL2ROW
-
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
#define LOCKING_SUPPORT_ENABLE
/* Locking resynchronize hack */
diff --git a/keyboards/handwired/snatchpad/info.json b/keyboards/handwired/snatchpad/info.json
index a86091abfd..908a390c33 100644
--- a/keyboards/handwired/snatchpad/info.json
+++ b/keyboards/handwired/snatchpad/info.json
@@ -8,6 +8,11 @@
"pid": "0x7370",
"device_version": "0.0.1"
},
+ "matrix_pins": {
+ "cols": ["B1", "B3", "B2"],
+ "rows": ["F4", "F5", "F6"]
+ },
+ "diode_direction": "COL2ROW",
"encoder": {
"rotary": [
{"pin_a": "D3", "pin_b": "D2"},
diff --git a/keyboards/handwired/sono1/config.h b/keyboards/handwired/sono1/config.h
index 9f1a9ae244..c4105bdf5f 100644
--- a/keyboards/handwired/sono1/config.h
+++ b/keyboards/handwired/sono1/config.h
@@ -17,10 +17,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
#pragma once
-
-/* COL2ROW, ROW2COL */
-#define DIODE_DIRECTION COL2ROW
-
/* mechanical locking support. NumLock key on the numpad uses Alps SKCL Lock switch */
#define LOCKING_SUPPORT_ENABLE
#define LOCKING_RESYNC_ENABLE
diff --git a/keyboards/handwired/sono1/stm32f103/config.h b/keyboards/handwired/sono1/stm32f103/config.h
index b961eaffd6..7cd783c0e9 100644
--- a/keyboards/handwired/sono1/stm32f103/config.h
+++ b/keyboards/handwired/sono1/stm32f103/config.h
@@ -17,9 +17,5 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
#pragma once
-
-#define MATRIX_ROW_PINS { A5, B3, A9, A10, B13, B14, B15, A8, B7, B8, B9, C13, A15, A0, A1 }
-#define MATRIX_COL_PINS { A4, A3, B11, B10, B1, B0, A7, A6 }
-
#define LED_CTRL_XFER_PIN B6
#define LED_KB_LOCK_PIN B12
diff --git a/keyboards/handwired/sono1/stm32f103/info.json b/keyboards/handwired/sono1/stm32f103/info.json
index b25392382a..f6e874a77f 100644
--- a/keyboards/handwired/sono1/stm32f103/info.json
+++ b/keyboards/handwired/sono1/stm32f103/info.json
@@ -2,6 +2,11 @@
"usb": {
"device_version": "0.0.1"
},
+ "matrix_pins": {
+ "cols": ["A4", "A3", "B11", "B10", "B1", "B0", "A7", "A6"],
+ "rows": ["A5", "B3", "A9", "A10", "B13", "B14", "B15", "A8", "B7", "B8", "B9", "C13", "A15", "A0", "A1"]
+ },
+ "diode_direction": "COL2ROW",
"indicators": {
"caps_lock": "B5",
"num_lock": "B4",
diff --git a/keyboards/handwired/sono1/t2pp/config.h b/keyboards/handwired/sono1/t2pp/config.h
index 15bea036a2..144031ea7b 100644
--- a/keyboards/handwired/sono1/t2pp/config.h
+++ b/keyboards/handwired/sono1/t2pp/config.h
@@ -17,9 +17,5 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
#pragma once
-
-#define MATRIX_ROW_PINS { F7, F6, F5, F4, F3, F2, F1, F0, D7, B7, D0, D1, D2, D3, D4 }
-#define MATRIX_COL_PINS { C6, C5, C4, C3, C2, C1, C0, E1 }
-
#define LED_CTRL_XFER_PIN B4
#define LED_KB_LOCK_PIN B1
diff --git a/keyboards/handwired/sono1/t2pp/info.json b/keyboards/handwired/sono1/t2pp/info.json
index 3e637c3e94..37ab6723ba 100644
--- a/keyboards/handwired/sono1/t2pp/info.json
+++ b/keyboards/handwired/sono1/t2pp/info.json
@@ -2,6 +2,11 @@
"usb": {
"device_version": "0.0.2"
},
+ "matrix_pins": {
+ "cols": ["C6", "C5", "C4", "C3", "C2", "C1", "C0", "E1"],
+ "rows": ["F7", "F6", "F5", "F4", "F3", "F2", "F1", "F0", "D7", "B7", "D0", "D1", "D2", "D3", "D4"]
+ },
+ "diode_direction": "COL2ROW",
"indicators": {
"caps_lock": "B3",
"num_lock": "B2",
diff --git a/keyboards/handwired/space_oddity/config.h b/keyboards/handwired/space_oddity/config.h
index 708be5389d..9a1e829e46 100644
--- a/keyboards/handwired/space_oddity/config.h
+++ b/keyboards/handwired/space_oddity/config.h
@@ -7,13 +7,6 @@
#define MOUSEKEY_MAX_SPEED 7
#define MOUSEKEY_WHEEL_DELAY 0
-/* key matrix pins */
-#define MATRIX_ROW_PINS { F4, F5, F6, F7, B1, B3 }
-#define MATRIX_COL_PINS { B2, B6, B5, B4, E6, D7, C6, D4, D0, D1, D2, D3 }
-
-/* COL2ROW or ROW2COL */
-#define DIODE_DIRECTION COL2ROW
-
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
#define LOCKING_SUPPORT_ENABLE
diff --git a/keyboards/handwired/space_oddity/info.json b/keyboards/handwired/space_oddity/info.json
index e03c13c3e0..48fe44be74 100644
--- a/keyboards/handwired/space_oddity/info.json
+++ b/keyboards/handwired/space_oddity/info.json
@@ -8,6 +8,11 @@
"pid": "0x6060",
"device_version": "0.0.1"
},
+ "matrix_pins": {
+ "cols": ["B2", "B6", "B5", "B4", "E6", "D7", "C6", "D4", "D0", "D1", "D2", "D3"],
+ "rows": ["F4", "F5", "F6", "F7", "B1", "B3"]
+ },
+ "diode_direction": "COL2ROW",
"processor": "atmega32u4",
"bootloader": "caterina",
"layouts": {
diff --git a/keyboards/handwired/split65/promicro/config.h b/keyboards/handwired/split65/promicro/config.h
index 7deab0a7db..b92456da98 100644
--- a/keyboards/handwired/split65/promicro/config.h
+++ b/keyboards/handwired/split65/promicro/config.h
@@ -15,14 +15,6 @@
*/
#pragma once
-
-
-#define MATRIX_COL_PINS {F4, F5, F6, F7, B1, B3, B2, B6}
-#define MATRIX_ROW_PINS {D4, C6, D7, E6, B4}
-
-// COL2ROW, ROW2COL
-#define DIODE_DIRECTION COL2ROW
-
#define MATRIX_IO_DELAY 5
#define SELECT_SOFT_SERIAL_SPEED 1
diff --git a/keyboards/handwired/split65/promicro/info.json b/keyboards/handwired/split65/promicro/info.json
index 81738c4d47..56d2dcb9ab 100644
--- a/keyboards/handwired/split65/promicro/info.json
+++ b/keyboards/handwired/split65/promicro/info.json
@@ -1,4 +1,9 @@
{
+ "matrix_pins": {
+ "cols": ["F4", "F5", "F6", "F7", "B1", "B3", "B2", "B6"],
+ "rows": ["D4", "C6", "D7", "E6", "B4"]
+ },
+ "diode_direction": "COL2ROW",
"split": {
"soft_serial_pin": "D3"
},
diff --git a/keyboards/handwired/split65/stm32/config.h b/keyboards/handwired/split65/stm32/config.h
index 483b897584..020e44f02e 100644
--- a/keyboards/handwired/split65/stm32/config.h
+++ b/keyboards/handwired/split65/stm32/config.h
@@ -21,12 +21,6 @@
#define AUDIO_PIN_ALT A4
#define AUDIO_PIN_ALT_AS_NEGATIVE
-#define MATRIX_COL_PINS {A2, A1, A0, B8, B13, B14, B15, B9}
-#define MATRIX_ROW_PINS {B5, B4, B3, B2, B1}
-
-// COL2ROW, ROW2COL
-#define DIODE_DIRECTION COL2ROW
-
#define MATRIX_IO_DELAY 5
#define SELECT_SOFT_SERIAL_SPEED 1
diff --git a/keyboards/handwired/split65/stm32/info.json b/keyboards/handwired/split65/stm32/info.json
index f497c14c01..e2c0a634f3 100644
--- a/keyboards/handwired/split65/stm32/info.json
+++ b/keyboards/handwired/split65/stm32/info.json
@@ -1,4 +1,9 @@
{
+ "matrix_pins": {
+ "cols": ["A2", "A1", "A0", "B8", "B13", "B14", "B15", "B9"],
+ "rows": ["B5", "B4", "B3", "B2", "B1"]
+ },
+ "diode_direction": "COL2ROW",
"split": {
"soft_serial_pin": "A9"
},
diff --git a/keyboards/handwired/split89/config.h b/keyboards/handwired/split89/config.h
index 637326617c..042c165a18 100644
--- a/keyboards/handwired/split89/config.h
+++ b/keyboards/handwired/split89/config.h
@@ -16,31 +16,9 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
#pragma once
-
-/*
- * Keyboard Matrix Assignments
- *
- * Change this to how you wired your keyboard
- * COLS: AVR pins used for columns, left to right
- * ROWS: AVR pins used for rows, top to bottom
- * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
- * ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
- *
- */
-
-/* Left side matrix */
-#define MATRIX_ROW_PINS { F6, F7, B1, B3, B2, B6 }
-#define MATRIX_COL_PINS { F5, F4, B5, B4, E6, D7, C6, D4, D2, D3 }
-/* Right side matrix */
-#define MATRIX_ROW_PINS_RIGHT { F6, F7, B1, B3, B2, B6 }
-#define MATRIX_COL_PINS_RIGHT { F5, F4, B5, B4, E6, D7, C6, D4, D2, D3 }
-
/* this will be tied to high (VCC with a 2k to 10k resistor) on the left keyboard half and tied to low (GND using a wire jumper only) on the right keyboard half. This allows a user to plug in a USB cable to either side and function correctly with or without a TRS/TRRS cable with a single hex file. */
#define SPLIT_HAND_PIN D1
-/* COL2ROW, ROW2COL */
-#define DIODE_DIRECTION COL2ROW
-
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
#define LOCKING_SUPPORT_ENABLE
/* Locking resynchronize hack */
diff --git a/keyboards/handwired/split89/info.json b/keyboards/handwired/split89/info.json
index 2cc68544a7..719eb05455 100644
--- a/keyboards/handwired/split89/info.json
+++ b/keyboards/handwired/split89/info.json
@@ -8,8 +8,19 @@
"pid": "0x0000",
"device_version": "0.0.1"
},
+ "matrix_pins": {
+ "cols": ["F5", "F4", "B5", "B4", "E6", "D7", "C6", "D4", "D2", "D3"],
+ "rows": ["F6", "F7", "B1", "B3", "B2", "B6"]
+ },
+ "diode_direction": "COL2ROW",
"split": {
- "soft_serial_pin": "D0"
+ "soft_serial_pin": "D0",
+ "matrix_pins": {
+ "right": {
+ "cols": ["F5", "F4", "B5", "B4", "E6", "D7", "C6", "D4", "D2", "D3"],
+ "rows": ["F6", "F7", "B1", "B3", "B2", "B6"]
+ }
+ }
},
"processor": "atmega32u4",
"bootloader": "caterina",
diff --git a/keyboards/handwired/splittest/bluepill/config.h b/keyboards/handwired/splittest/bluepill/config.h
index 54b00b88a5..d19bb3dee8 100644
--- a/keyboards/handwired/splittest/bluepill/config.h
+++ b/keyboards/handwired/splittest/bluepill/config.h
@@ -3,11 +3,6 @@
#pragma once
-
-// wiring of each half
-#define MATRIX_ROW_PINS { B10 }
-#define MATRIX_COL_PINS { B1 }
-
#define SPLIT_HAND_PIN A7
#if !(defined(USE_SDI1_ON_STANDARD_ROLE_PINS) || defined(USE_SDI1_ON_ALTERNATE_ROLE_PINS) || defined(USE_SDI2))
diff --git a/keyboards/handwired/splittest/bluepill/info.json b/keyboards/handwired/splittest/bluepill/info.json
index cf993be247..17b7f86a6f 100644
--- a/keyboards/handwired/splittest/bluepill/info.json
+++ b/keyboards/handwired/splittest/bluepill/info.json
@@ -1,4 +1,9 @@
{
+ "matrix_pins": {
+ "cols": ["B1"],
+ "rows": ["B10"]
+ },
+ "diode_direction": "COL2ROW",
"processor": "STM32F103",
"bootloader": "stm32duino"
}
diff --git a/keyboards/handwired/splittest/config.h b/keyboards/handwired/splittest/config.h
index af60e7e0a9..49bc3cbddb 100644
--- a/keyboards/handwired/splittest/config.h
+++ b/keyboards/handwired/splittest/config.h
@@ -18,9 +18,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
#pragma once
-
-#define DIODE_DIRECTION COL2ROW
-
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
#define LOCKING_SUPPORT_ENABLE
/* Locking resynchronize hack */
diff --git a/keyboards/handwired/splittest/promicro/config.h b/keyboards/handwired/splittest/promicro/config.h
index 45f005222f..f0fd3dfc85 100644
--- a/keyboards/handwired/splittest/promicro/config.h
+++ b/keyboards/handwired/splittest/promicro/config.h
@@ -20,9 +20,6 @@
// use I2C on AVR
#define USE_I2C
-// wiring of each half
-#define MATRIX_ROW_PINS { B3 }
-#define MATRIX_COL_PINS { B6 }
#define SPLIT_HAND_PIN F6
/* ws2812 RGB LED */
diff --git a/keyboards/handwired/splittest/promicro/info.json b/keyboards/handwired/splittest/promicro/info.json
index ecf716ff97..a99bc3ea13 100644
--- a/keyboards/handwired/splittest/promicro/info.json
+++ b/keyboards/handwired/splittest/promicro/info.json
@@ -1,4 +1,9 @@
{
+ "matrix_pins": {
+ "cols": ["B6"],
+ "rows": ["B3"]
+ },
+ "diode_direction": "COL2ROW",
"split": {
"soft_serial_pin": "D1"
},
diff --git a/keyboards/handwired/splittest/teensy_2/config.h b/keyboards/handwired/splittest/teensy_2/config.h
index 7b77a5e36b..6b52516807 100644
--- a/keyboards/handwired/splittest/teensy_2/config.h
+++ b/keyboards/handwired/splittest/teensy_2/config.h
@@ -20,9 +20,6 @@
// use I2C on AVR
#define USE_I2C
-// wiring of each half
-#define MATRIX_ROW_PINS { F5 }
-#define MATRIX_COL_PINS { F7 }
#define SPLIT_HAND_PIN F0
/* ws2812 RGB LED */
diff --git a/keyboards/handwired/splittest/teensy_2/info.json b/keyboards/handwired/splittest/teensy_2/info.json
index a67cb4e2f2..f6fd6faf33 100644
--- a/keyboards/handwired/splittest/teensy_2/info.json
+++ b/keyboards/handwired/splittest/teensy_2/info.json
@@ -1,4 +1,9 @@
{
+ "matrix_pins": {
+ "cols": ["F7"],
+ "rows": ["F5"]
+ },
+ "diode_direction": "COL2ROW",
"split": {
"soft_serial_pin": "D1"
},
diff --git a/keyboards/handwired/steamvan/rev1/config.h b/keyboards/handwired/steamvan/rev1/config.h
index b52e370419..9885c0737c 100644
--- a/keyboards/handwired/steamvan/rev1/config.h
+++ b/keyboards/handwired/steamvan/rev1/config.h
@@ -17,15 +17,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
#pragma once
-
-/* ROWS: Top to bottom, COLS: Left to right
-*/
-#define MATRIX_ROW_PINS { A6, A5, A4, A3 }
-#define MATRIX_COL_PINS { A9, A8, B15, B14, B13, A10, B9, B6, B5, B4, B3, A15 }
-
-/* COL2ROW, ROW2COL */
-#define DIODE_DIRECTION COL2ROW
-
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
#define LOCKING_SUPPORT_ENABLE
/* Locking resynchronize hack */
diff --git a/keyboards/handwired/steamvan/rev1/info.json b/keyboards/handwired/steamvan/rev1/info.json
index ed10d8005b..8e7670c2de 100644
--- a/keyboards/handwired/steamvan/rev1/info.json
+++ b/keyboards/handwired/steamvan/rev1/info.json
@@ -8,6 +8,11 @@
"pid": "0x0000",
"device_version": "0.0.1"
},
+ "matrix_pins": {
+ "cols": ["A9", "A8", "B15", "B14", "B13", "A10", "B9", "B6", "B5", "B4", "B3", "A15"],
+ "rows": ["A6", "A5", "A4", "A3"]
+ },
+ "diode_direction": "COL2ROW",
"backlight": {
"pin": "B8",
"breathing": true
diff --git a/keyboards/handwired/stef9998/split_5x7/info.json b/keyboards/handwired/stef9998/split_5x7/info.json
index 75d151d5b6..91b6cd39c5 100644
--- a/keyboards/handwired/stef9998/split_5x7/info.json
+++ b/keyboards/handwired/stef9998/split_5x7/info.json
@@ -8,8 +8,19 @@
"pid": "0x6063",
"device_version": "1.0.0"
},
+ "matrix_pins": {
+ "cols": ["B2", "B6", "B1", "B3", "F7", "F5", "F6"],
+ "rows": ["C6", "D7", "E6", "B4", "B5"]
+ },
+ "diode_direction": "COL2ROW",
"split": {
- "soft_serial_pin": "D0"
+ "soft_serial_pin": "D0",
+ "matrix_pins": {
+ "right": {
+ "cols": ["F5", "F6", "F7", "B1", "B3", "B2", "B6"],
+ "rows": ["B5", "B4", "E6", "D7", "C6"]
+ }
+ }
},
"processor": "atmega32u4",
"bootloader": "caterina",
diff --git a/keyboards/handwired/stef9998/split_5x7/rev1/config.h b/keyboards/handwired/stef9998/split_5x7/rev1/config.h
deleted file mode 100644
index 2957afc125..0000000000
--- a/keyboards/handwired/stef9998/split_5x7/rev1/config.h
+++ /dev/null
@@ -1,45 +0,0 @@
-/*
-Copyright 2022 stef9998
-
-This program is free software: you can redistribute it and/or modify
-it under the terms of the GNU General Public License as published by
-the Free Software Foundation, either version 2 of the License, or
-(at your option) any later version.
-
-This program is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-GNU General Public License for more details.
-
-You should have received a copy of the GNU General Public License
-along with this program. If not, see <http://www.gnu.org/licenses/>.
-*/
-
-#pragma once
-
-
-// wiring of each half
-#define MATRIX_ROW_PINS { C6, D7, E6, B4, B5 }
-#define MATRIX_COL_PINS { B2, B6, B1, B3, F7, F5, F6 }
-
-#define MATRIX_ROW_PINS_RIGHT { B5, B4, E6, D7, C6 }
-#define MATRIX_COL_PINS_RIGHT { F5, F6, F7, B1, B3, B2, B6 }
-
-/* COL2ROW or ROW2COL */
-#define DIODE_DIRECTION COL2ROW
-
-/*
- * Feature disable options
- * These options are also useful to firmware size reduction.
- */
-
-/* disable debug print */
-// #define NO_DEBUG
-
-/* disable print */
-// #define NO_PRINT
-
-/* disable action features */
-//#define NO_ACTION_LAYER
-//#define NO_ACTION_TAPPING
-//#define NO_ACTION_ONESHOT
diff --git a/keyboards/handwired/sticc14/config.h b/keyboards/handwired/sticc14/config.h
index 43a17c9e88..b4a9e4014d 100644
--- a/keyboards/handwired/sticc14/config.h
+++ b/keyboards/handwired/sticc14/config.h
@@ -17,23 +17,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
#pragma once
-
-/*
- * Keyboard Matrix Assignments
- *
- * Change this to how you wired your keyboard
- * COLS: AVR pins used for columns, left to right
- * ROWS: AVR pins used for rows, top to bottom
- * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
- * ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
- *
- */
-#define MATRIX_ROW_PINS { F4, F5, F6, F7, B1 }
-#define MATRIX_COL_PINS { B6, B2, B3 }
-
-/* COL2ROW, ROW2COL*/
-#define DIODE_DIRECTION COL2ROW
-
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
#define LOCKING_SUPPORT_ENABLE
/* Locking resynchronize hack */
diff --git a/keyboards/handwired/sticc14/info.json b/keyboards/handwired/sticc14/info.json
index 194ac0eeb3..7733b642ec 100644
--- a/keyboards/handwired/sticc14/info.json
+++ b/keyboards/handwired/sticc14/info.json
@@ -8,6 +8,11 @@
"pid": "0x0000",
"device_version": "0.0.1"
},
+ "matrix_pins": {
+ "cols": ["B6", "B2", "B3"],
+ "rows": ["F4", "F5", "F6", "F7", "B1"]
+ },
+ "diode_direction": "COL2ROW",
"processor": "atmega32u4",
"bootloader": "caterina",
"layouts": {
diff --git a/keyboards/handwired/swiftrax/astro65/config.h b/keyboards/handwired/swiftrax/astro65/config.h
deleted file mode 100644
index f379fab490..0000000000
--- a/keyboards/handwired/swiftrax/astro65/config.h
+++ /dev/null
@@ -1,29 +0,0 @@
-/*
-Copyright 2020 Swiftrax <swiftrax@gmail.com>
-
-This program is free software: you can redistribute it and/or modify
-it under the terms of the GNU General Public License as published by
-the Free Software Foundation, either version 2 of the License, or
-(at your option) any later version.
-
-This program is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-GNU General Public License for more details.
-
-You should have received a copy of the GNU General Public License
-along with this program. If not, see <http://www.gnu.org/licenses/>.
-*/
-
-#pragma once
-
-
-// ROWS: Top to bottom, COLS: Left to right
-
-#define MATRIX_ROW_PINS \
- { B0, B3, F7, B1, B2 }
-#define MATRIX_COL_PINS \
- { E6, D5, D3, D4, D6, D7, B4, B5, B6, C6, C7, F6, F5, F4, F1, F0 }
-
-/* COL2ROW or ROW2COL */
-#define DIODE_DIRECTION COL2ROW
diff --git a/keyboards/handwired/swiftrax/astro65/info.json b/keyboards/handwired/swiftrax/astro65/info.json
index fef1bd6999..8de67f3706 100644
--- a/keyboards/handwired/swiftrax/astro65/info.json
+++ b/keyboards/handwired/swiftrax/astro65/info.json
@@ -8,6 +8,11 @@
"pid": "0xEAEF",
"device_version": "0.0.1"
},
+ "matrix_pins": {
+ "cols": ["E6", "D5", "D3", "D4", "D6", "D7", "B4", "B5", "B6", "C6", "C7", "F6", "F5", "F4", "F1", "F0"],
+ "rows": ["B0", "B3", "F7", "B1", "B2"]
+ },
+ "diode_direction": "COL2ROW",
"processor": "atmega32u4",
"bootloader": "atmel-dfu",
"community_layouts": ["65_ansi_blocker_split_bs"],
diff --git a/keyboards/handwired/swiftrax/bebol/config.h b/keyboards/handwired/swiftrax/bebol/config.h
deleted file mode 100644
index 057d1527df..0000000000
--- a/keyboards/handwired/swiftrax/bebol/config.h
+++ /dev/null
@@ -1,27 +0,0 @@
-/*
-Copyright 2020 Swiftrax <swiftrax@gmail.com>
-
-This program is free software: you can redistribute it and/or modify
-it under the terms of the GNU General Public License as published by
-the Free Software Foundation, either version 2 of the License, or
-(at your option) any later version.
-
-This program is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-GNU General Public License for more details.
-
-You should have received a copy of the GNU General Public License
-along with this program. If not, see <http://www.gnu.org/licenses/>.
-*/
-
-#pragma once
-
-
-// ROWS: Top to bottom, COLS: Left to right
-
-#define MATRIX_ROW_PINS { B2, B3, F7, F0, B7 }
-#define MATRIX_COL_PINS { B1, D2, D3, F1, F4, F5, F6, C7, C6, B6, B5, B4, D7, D6, D4, D5 }
-
-/* COL2ROW or ROW2COL */
-#define DIODE_DIRECTION COL2ROW
diff --git a/keyboards/handwired/swiftrax/bebol/info.json b/keyboards/handwired/swiftrax/bebol/info.json
index 29c7f21323..e1b1fcdc64 100644
--- a/keyboards/handwired/swiftrax/bebol/info.json
+++ b/keyboards/handwired/swiftrax/bebol/info.json
@@ -8,6 +8,11 @@
"pid": "0xEAC4",
"device_version": "0.0.1"
},
+ "matrix_pins": {
+ "cols": ["B1", "D2", "D3", "F1", "F4", "F5", "F6", "C7", "C6", "B6", "B5", "B4", "D7", "D6", "D4", "D5"],
+ "rows": ["B2", "B3", "F7", "F0", "B7"]
+ },
+ "diode_direction": "COL2ROW",
"processor": "atmega32u4",
"bootloader": "atmel-dfu",
"layouts": {
diff --git a/keyboards/handwired/swiftrax/beegboy/config.h b/keyboards/handwired/swiftrax/beegboy/config.h
index 282a766e55..092f2ba0e9 100644
--- a/keyboards/handwired/swiftrax/beegboy/config.h
+++ b/keyboards/handwired/swiftrax/beegboy/config.h
@@ -17,15 +17,5 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
#pragma once
-
-// ROWS: Top to bottom, COLS: Left to right
-
-#define MATRIX_ROW_PINS { B1, B0, B3, B2, D0, B7, D2, D1, B5, B4, C6, B6 }
-#define MATRIX_COL_PINS { F0, F1, F4, F5, F6, F7, C7, D5, D3 }
-
-
-/* COL2ROW or ROW2COL */
-#define DIODE_DIRECTION ROW2COL
-
/*EEPROM for via*/
#define DYNAMIC_KEYMAP_LAYER_COUNT 3
diff --git a/keyboards/handwired/swiftrax/beegboy/info.json b/keyboards/handwired/swiftrax/beegboy/info.json
index a52b6e37e7..29fc7dddda 100644
--- a/keyboards/handwired/swiftrax/beegboy/info.json
+++ b/keyboards/handwired/swiftrax/beegboy/info.json
@@ -8,6 +8,11 @@
"pid": "0xEAC5",
"device_version": "0.0.1"
},
+ "matrix_pins": {
+ "cols": ["F0", "F1", "F4", "F5", "F6", "F7", "C7", "D5", "D3"],
+ "rows": ["B1", "B0", "B3", "B2", "D0", "B7", "D2", "D1", "B5", "B4", "C6", "B6"]
+ },
+ "diode_direction": "ROW2COL",
"processor": "atmega32u4",
"bootloader": "atmel-dfu",
"layouts": {
diff --git a/keyboards/handwired/swiftrax/bumblebee/config.h b/keyboards/handwired/swiftrax/bumblebee/config.h
index c10291a82a..48211c215f 100644
--- a/keyboards/handwired/swiftrax/bumblebee/config.h
+++ b/keyboards/handwired/swiftrax/bumblebee/config.h
@@ -17,14 +17,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
#pragma once
-// ROWS: Top to bottom, COLS: Left to right
-
-#define MATRIX_ROW_PINS { B0, B1, B2, B3, F4, F5, F6, F7 }
-#define MATRIX_COL_PINS { C7, D3, D5, D4, D6, D7, B4, B5 }
-
-/* COL2ROW or ROW2COL */
-#define DIODE_DIRECTION ROW2COL
-
/* RGB Indicators */
#define RGB_DI_PIN E6
#define RGBLED_NUM 3
diff --git a/keyboards/handwired/swiftrax/bumblebee/info.json b/keyboards/handwired/swiftrax/bumblebee/info.json
index 2147a556c2..ad779c155b 100644
--- a/keyboards/handwired/swiftrax/bumblebee/info.json
+++ b/keyboards/handwired/swiftrax/bumblebee/info.json
@@ -8,6 +8,11 @@
"pid": "0xE881",
"device_version": "0.0.1"
},
+ "matrix_pins": {
+ "cols": ["C7", "D3", "D5", "D4", "D6", "D7", "B4", "B5"],
+ "rows": ["B0", "B1", "B2", "B3", "F4", "F5", "F6", "F7"]
+ },
+ "diode_direction": "ROW2COL",
"encoder": {
"rotary": [
{"pin_a": "C6", "pin_b": "B6"}
diff --git a/keyboards/handwired/swiftrax/cowfish/config.h b/keyboards/handwired/swiftrax/cowfish/config.h
index 8a947bbea4..092f2ba0e9 100644
--- a/keyboards/handwired/swiftrax/cowfish/config.h
+++ b/keyboards/handwired/swiftrax/cowfish/config.h
@@ -17,14 +17,5 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
#pragma once
-
-// ROWS: Top to bottom, COLS: Left to right
-
-#define MATRIX_ROW_PINS { D0, D1, B7, E6, D4, D6 }
-#define MATRIX_COL_PINS { B3, B2, B1, F0, F1, F4, F5, F6, F7, B5, B6, B4, C6, D7, C7, D2, D3, D5}
-
-/* COL2ROW or ROW2COL */
-#define DIODE_DIRECTION COL2ROW
-
/*EEPROM for via*/
#define DYNAMIC_KEYMAP_LAYER_COUNT 3
diff --git a/keyboards/handwired/swiftrax/cowfish/info.json b/keyboards/handwired/swiftrax/cowfish/info.json
index 4de9d07292..0d725ab8bc 100644
--- a/keyboards/handwired/swiftrax/cowfish/info.json
+++ b/keyboards/handwired/swiftrax/cowfish/info.json
@@ -8,6 +8,11 @@
"pid": "0xEB53",
"device_version": "0.0.1"
},
+ "matrix_pins": {
+ "cols": ["B3", "B2", "B1", "F0", "F1", "F4", "F5", "F6", "F7", "B5", "B6", "B4", "C6", "D7", "C7", "D2", "D3", "D5"],
+ "rows": ["D0", "D1", "B7", "E6", "D4", "D6"]
+ },
+ "diode_direction": "COL2ROW",
"processor": "atmega32u4",
"bootloader": "atmel-dfu",
"layouts": {
diff --git a/keyboards/handwired/swiftrax/digicarp65/config.h b/keyboards/handwired/swiftrax/digicarp65/config.h
deleted file mode 100644
index 80b735d0d8..0000000000
--- a/keyboards/handwired/swiftrax/digicarp65/config.h
+++ /dev/null
@@ -1,27 +0,0 @@
-/*
-Copyright 2022 Swiftrax <swiftrax@gmail.com>
-
-This program is free software: you can redistribute it and/or modify
-it under the terms of the GNU General Public License as published by
-the Free Software Foundation, either version 2 of the License, or
-(at your option) any later version.
-
-This program is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-GNU General Public License for more details.
-
-You should have received a copy of the GNU General Public License
-along with this program. If not, see <http://www.gnu.org/licenses/>.
-*/
-
-#pragma once
-
-
-// ROWS: Top to bottom, COLS: Left to right
-
-#define MATRIX_ROW_PINS { B2, B1, F4, F1, F0 }
-#define MATRIX_COL_PINS { F5, C6, F6, F7, C7, B6, B5, B4, D7, D6, D4, D5, D3, D2, D1, D0 }
-
-/* COL2ROW or ROW2COL */
-#define DIODE_DIRECTION COL2ROW
diff --git a/keyboards/handwired/swiftrax/digicarp65/info.json b/keyboards/handwired/swiftrax/digicarp65/info.json
index 2eef105756..49066b6654 100644
--- a/keyboards/handwired/swiftrax/digicarp65/info.json
+++ b/keyboards/handwired/swiftrax/digicarp65/info.json
@@ -8,6 +8,11 @@
"pid": "0xE7F1",
"device_version": "0.0.1"
},
+ "matrix_pins": {
+ "cols": ["F5", "C6", "F6", "F7", "C7", "B6", "B5", "B4", "D7", "D6", "D4", "D5", "D3", "D2", "D1", "D0"],
+ "rows": ["B2", "B1", "F4", "F1", "F0"]
+ },
+ "diode_direction": "COL2ROW",
"encoder": {
"rotary": [
{"pin_a": "B3", "pin_b": "B7"}
diff --git a/keyboards/handwired/swiftrax/digicarpice/config.h b/keyboards/handwired/swiftrax/digicarpice/config.h
deleted file mode 100644
index 18f75ffe69..0000000000
--- a/keyboards/handwired/swiftrax/digicarpice/config.h
+++ /dev/null
@@ -1,27 +0,0 @@
-/*
-Copyright 2022 Swiftrax <swiftrax@gmail.com>
-
-This program is free software: you can redistribute it and/or modify
-it under the terms of the GNU General Public License as published by
-the Free Software Foundation, either version 2 of the License, or
-(at your option) any later version.
-
-This program is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-GNU General Public License for more details.
-
-You should have received a copy of the GNU General Public License
-along with this program. If not, see <http://www.gnu.org/licenses/>.
-*/
-
-#pragma once
-
-
-// ROWS: Top to bottom, COLS: Left to right
-
-#define MATRIX_ROW_PINS { F0, D5, D7, D6, D4 }
-#define MATRIX_COL_PINS { F1, F4, F5, F6, F7, C7, D3, D2, D1, D0, B7, B3, B2, B1, B0 }
-
-/* COL2ROW or ROW2COL */
-#define DIODE_DIRECTION COL2ROW
diff --git a/keyboards/handwired/swiftrax/digicarpice/info.json b/keyboards/handwired/swiftrax/digicarpice/info.json
index f311c9606d..7e92b0a59c 100644
--- a/keyboards/handwired/swiftrax/digicarpice/info.json
+++ b/keyboards/handwired/swiftrax/digicarpice/info.json
@@ -8,6 +8,11 @@
"pid": "0xE79A",
"device_version": "0.0.1"
},
+ "matrix_pins": {
+ "cols": ["F1", "F4", "F5", "F6", "F7", "C7", "D3", "D2", "D1", "D0", "B7", "B3", "B2", "B1", "B0"],
+ "rows": ["F0", "D5", "D7", "D6", "D4"]
+ },
+ "diode_direction": "COL2ROW",
"processor": "atmega32u4",
"bootloader": "atmel-dfu",
"layouts": {
diff --git a/keyboards/handwired/swiftrax/equator/config.h b/keyboards/handwired/swiftrax/equator/config.h
deleted file mode 100644
index d5df0d1942..0000000000
--- a/keyboards/handwired/swiftrax/equator/config.h
+++ /dev/null
@@ -1,27 +0,0 @@
-/*
-Copyright 2021 Swiftrax <swiftrax@gmail.com>
-
-This program is free software: you can redistribute it and/or modify
-it under the terms of the GNU General Public License as published by
-the Free Software Foundation, either version 2 of the License, or
-(at your option) any later version.
-
-This program is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-GNU General Public License for more details.
-
-You should have received a copy of the GNU General Public License
-along with this program. If not, see <http://www.gnu.org/licenses/>.
-*/
-
-#pragma once
-
-
-// ROWS: Top to bottom, COLS: Left to right
-
-#define MATRIX_ROW_PINS { B2, B3, C7, B4, B5 }
-#define MATRIX_COL_PINS { F0, F1, F4, F5, F6, F7, D7, D6, D4, D5, D3, D2, D1, D0 }
-
-/* COL2ROW or ROW2COL */
-#define DIODE_DIRECTION COL2ROW
diff --git a/keyboards/handwired/swiftrax/equator/info.json b/keyboards/handwired/swiftrax/equator/info.json
index 0e58b5569c..697e23d590 100644
--- a/keyboards/handwired/swiftrax/equator/info.json
+++ b/keyboards/handwired/swiftrax/equator/info.json
@@ -8,6 +8,11 @@
"pid": "0xE984",
"device_version": "0.0.1"
},
+ "matrix_pins": {
+ "cols": ["F0", "F1", "F4", "F5", "F6", "F7", "D7", "D6", "D4", "D5", "D3", "D2", "D1", "D0"],
+ "rows": ["B2", "B3", "C7", "B4", "B5"]
+ },
+ "diode_direction": "COL2ROW",
"processor": "atmega32u4",
"bootloader": "atmel-dfu",
"layouts": {
diff --git a/keyboards/handwired/swiftrax/glacier/config.h b/keyboards/handwired/swiftrax/glacier/config.h
index b83d4cc943..cdc4c78084 100644
--- a/keyboards/handwired/swiftrax/glacier/config.h
+++ b/keyboards/handwired/swiftrax/glacier/config.h
@@ -17,15 +17,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
#pragma once
-
-// ROWS: Top to bottom, COLS: Left to right
-
-#define MATRIX_ROW_PINS { B1, B2, B3, B4, B5, B6, E5, E4, D4, D5, D7, D6 }
-#define MATRIX_COL_PINS { F0, F1, F2, F3, F4, F5, F6, D0, D1, D2 }
-
-/* COL2ROW or ROW2COL */
-#define DIODE_DIRECTION ROW2COL
-
/*EEPROM for via*/
#define DYNAMIC_KEYMAP_LAYER_COUNT 3
diff --git a/keyboards/handwired/swiftrax/glacier/info.json b/keyboards/handwired/swiftrax/glacier/info.json
index dc3bae097c..993f4ca040 100644
--- a/keyboards/handwired/swiftrax/glacier/info.json
+++ b/keyboards/handwired/swiftrax/glacier/info.json
@@ -8,6 +8,11 @@
"pid": "0xE890",
"device_version": "0.0.1"
},
+ "matrix_pins": {
+ "cols": ["F0", "F1", "F2", "F3", "F4", "F5", "F6", "D0", "D1", "D2"],
+ "rows": ["B1", "B2", "B3", "B4", "B5", "B6", "E5", "E4", "D4", "D5", "D7", "D6"]
+ },
+ "diode_direction": "ROW2COL",
"processor": "at90usb1286",
"bootloader": "atmel-dfu",
"layouts": {
diff --git a/keyboards/handwired/swiftrax/joypad/config.h b/keyboards/handwired/swiftrax/joypad/config.h
index 2f54bc0c4e..092f2ba0e9 100644
--- a/keyboards/handwired/swiftrax/joypad/config.h
+++ b/keyboards/handwired/swiftrax/joypad/config.h
@@ -17,14 +17,5 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
#pragma once
-
-// ROWS: Top to bottom, COLS: Left to right
-
-#define MATRIX_ROW_PINS { C6, B3, B0, B1, D6, D5 }
-#define MATRIX_COL_PINS { C7, B4, D0, C2 }
-
-/* COL2ROW or ROW2COL */
-#define DIODE_DIRECTION COL2ROW
-
/*EEPROM for via*/
#define DYNAMIC_KEYMAP_LAYER_COUNT 3
diff --git a/keyboards/handwired/swiftrax/joypad/info.json b/keyboards/handwired/swiftrax/joypad/info.json
index bef5225bcd..4ff90591d1 100644
--- a/keyboards/handwired/swiftrax/joypad/info.json
+++ b/keyboards/handwired/swiftrax/joypad/info.json
@@ -8,6 +8,11 @@
"pid": "0xEA68",
"device_version": "0.0.1"
},
+ "matrix_pins": {
+ "cols": ["C7", "B4", "D0", "C2"],
+ "rows": ["C6", "B3", "B0", "B1", "D6", "D5"]
+ },
+ "diode_direction": "COL2ROW",
"encoder": {
"rotary": [
{"pin_a": "C5", "pin_b": "C4"}
diff --git a/keyboards/handwired/swiftrax/koalafications/config.h b/keyboards/handwired/swiftrax/koalafications/config.h
index 442b53a9ba..7435ce54af 100644
--- a/keyboards/handwired/swiftrax/koalafications/config.h
+++ b/keyboards/handwired/swiftrax/koalafications/config.h
@@ -17,14 +17,5 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
#pragma once
-
-// ROWS: Top to bottom, COLS: Left to right
-
-#define MATRIX_ROW_PINS { B1, B2, E6, F1, F4, F5 }
-#define MATRIX_COL_PINS { F0, D5, D3, D2, B3, F6, F7, C7, C6, B6, B5, B4, D7, D6, D4 }
-
-/* COL2ROW or ROW2COL */
-#define DIODE_DIRECTION COL2ROW
-
/*EEPROM for via*/
#define DYNAMIC_KEYMAP_LAYER_COUNT 3 \ No newline at end of file
diff --git a/keyboards/handwired/swiftrax/koalafications/info.json b/keyboards/handwired/swiftrax/koalafications/info.json
index dccea0b2b8..0129cc95a4 100644
--- a/keyboards/handwired/swiftrax/koalafications/info.json
+++ b/keyboards/handwired/swiftrax/koalafications/info.json
@@ -8,6 +8,11 @@
"pid": "0xEA44",
"device_version": "0.0.1"
},
+ "matrix_pins": {
+ "cols": ["F0", "D5", "D3", "D2", "B3", "F6", "F7", "C7", "C6", "B6", "B5", "B4", "D7", "D6", "D4"],
+ "rows": ["B1", "B2", "E6", "F1", "F4", "F5"]
+ },
+ "diode_direction": "COL2ROW",
"processor": "atmega32u4",
"bootloader": "atmel-dfu",
"layouts": {
diff --git a/keyboards/handwired/swiftrax/nodu/config.h b/keyboards/handwired/swiftrax/nodu/config.h
index e65ed138ad..6726795c45 100644
--- a/keyboards/handwired/swiftrax/nodu/config.h
+++ b/keyboards/handwired/swiftrax/nodu/config.h
@@ -17,14 +17,5 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
#pragma once
-
-// ROWS: Top to bottom, COLS: Left to right
-
-#define MATRIX_ROW_PINS { B0, B3, F5, F4, F1 }
-#define MATRIX_COL_PINS { F0, B7, C7, C6, B6, B5, B4, D7, D6, D5, D3, D2, D1, D0 }
-
-/* COL2ROW or ROW2COL */
-#define DIODE_DIRECTION COL2ROW
-
/*EEPROM for via*/
#define DYNAMIC_KEYMAP_LAYER_COUNT 3 \ No newline at end of file
diff --git a/keyboards/handwired/swiftrax/nodu/info.json b/keyboards/handwired/swiftrax/nodu/info.json
index c73c80f4d5..f0110b33fb 100644
--- a/keyboards/handwired/swiftrax/nodu/info.json
+++ b/keyboards/handwired/swiftrax/nodu/info.json
@@ -8,6 +8,11 @@
"pid": "0xEA6E",
"device_version": "0.0.1"
},
+ "matrix_pins": {
+ "cols": ["F0", "B7", "C7", "C6", "B6", "B5", "B4", "D7", "D6", "D5", "D3", "D2", "D1", "D0"],
+ "rows": ["B0", "B3", "F5", "F4", "F1"]
+ },
+ "diode_direction": "COL2ROW",
"processor": "atmega32u4",
"bootloader": "atmel-dfu",
"layout_aliases": {
diff --git a/keyboards/handwired/swiftrax/pandamic/config.h b/keyboards/handwired/swiftrax/pandamic/config.h
index 77daa76c24..092f2ba0e9 100644
--- a/keyboards/handwired/swiftrax/pandamic/config.h
+++ b/keyboards/handwired/swiftrax/pandamic/config.h
@@ -17,14 +17,5 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
#pragma once
-
-// ROWS: Top to bottom, COLS: Left to right
-
-#define MATRIX_ROW_PINS { D1, D2, B5, B7, D3, D5, D6, D4, D7, B4 }
-#define MATRIX_COL_PINS { B6, C6, C7, F7, F6, F5, F4, F1, F0, D0 }
-
-/* COL2ROW or ROW2COL */
-#define DIODE_DIRECTION ROW2COL
-
/*EEPROM for via*/
#define DYNAMIC_KEYMAP_LAYER_COUNT 3
diff --git a/keyboards/handwired/swiftrax/pandamic/info.json b/keyboards/handwired/swiftrax/pandamic/info.json
index 60fe2886f5..253e20b715 100644
--- a/keyboards/handwired/swiftrax/pandamic/info.json
+++ b/keyboards/handwired/swiftrax/pandamic/info.json
@@ -8,6 +8,11 @@
"pid": "0xEB0E",
"device_version": "0.0.1"
},
+ "matrix_pins": {
+ "cols": ["B6", "C6", "C7", "F7", "F6", "F5", "F4", "F1", "F0", "D0"],
+ "rows": ["D1", "D2", "B5", "B7", "D3", "D5", "D6", "D4", "D7", "B4"]
+ },
+ "diode_direction": "ROW2COL",
"encoder": {
"rotary": [
{"pin_a": "E6", "pin_b": "B0"}
diff --git a/keyboards/handwired/swiftrax/the_galleon/config.h b/keyboards/handwired/swiftrax/the_galleon/config.h
index 99d688f065..7f9b0b12d4 100644
--- a/keyboards/handwired/swiftrax/the_galleon/config.h
+++ b/keyboards/handwired/swiftrax/the_galleon/config.h
@@ -17,15 +17,5 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
#pragma once
-
-// ROWS: Top to bottom, COLS: Left to right
-
-#define MATRIX_ROW_PINS { B1, B0, D2, B7, D5, D3, D6, D4, B4, D7, B6, B5, C7, C6}
-#define MATRIX_COL_PINS { E6, F0, F1, F4, F5, F6, F7, B3, B2 }
-
-
-/* COL2ROW or ROW2COL */
-#define DIODE_DIRECTION ROW2COL
-
/*EEPROM for via*/
#define DYNAMIC_KEYMAP_LAYER_COUNT 3
diff --git a/keyboards/handwired/swiftrax/the_galleon/info.json b/keyboards/handwired/swiftrax/the_galleon/info.json
index bd62d9de2d..751ec9eb00 100644
--- a/keyboards/handwired/swiftrax/the_galleon/info.json
+++ b/keyboards/handwired/swiftrax/the_galleon/info.json
@@ -8,6 +8,11 @@
"pid": "0xEA2D",
"device_version": "0.0.1"
},
+ "matrix_pins": {
+ "cols": ["E6", "F0", "F1", "F4", "F5", "F6", "F7", "B3", "B2"],
+ "rows": ["B1", "B0", "D2", "B7", "D5", "D3", "D6", "D4", "B4", "D7", "B6", "B5", "C7", "C6"]
+ },
+ "diode_direction": "ROW2COL",
"processor": "atmega32u4",
"bootloader": "atmel-dfu",
"layouts": {
diff --git a/keyboards/handwired/swiftrax/unsplit/config.h b/keyboards/handwired/swiftrax/unsplit/config.h
deleted file mode 100644
index 702e06abe2..0000000000
--- a/keyboards/handwired/swiftrax/unsplit/config.h
+++ /dev/null
@@ -1,27 +0,0 @@
-/*
-Copyright 2020 Swiftrax <swiftrax@gmail.com>
-
-This program is free software: you can redistribute it and/or modify
-it under the terms of the GNU General Public License as published by
-the Free Software Foundation, either version 2 of the License, or
-(at your option) any later version.
-
-This program is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-GNU General Public License for more details.
-
-You should have received a copy of the GNU General Public License
-along with this program. If not, see <http://www.gnu.org/licenses/>.
-*/
-
-#pragma once
-
-
-// ROWS: Top to bottom, COLS: Left to right
-
-#define MATRIX_ROW_PINS { B6, D7, B5, B4 }
-#define MATRIX_COL_PINS { D1, D2, D3, D5, D4, D6, C6, C7, F6, F5, F4, F1 }
-
-/* COL2ROW or ROW2COL */
-#define DIODE_DIRECTION COL2ROW
diff --git a/keyboards/handwired/swiftrax/unsplit/info.json b/keyboards/handwired/swiftrax/unsplit/info.json
index 619bd652fb..7e21ec0208 100644
--- a/keyboards/handwired/swiftrax/unsplit/info.json
+++ b/keyboards/handwired/swiftrax/unsplit/info.json
@@ -8,6 +8,11 @@
"pid": "0xEAB1",
"device_version": "0.0.1"
},
+ "matrix_pins": {
+ "cols": ["D1", "D2", "D3", "D5", "D4", "D6", "C6", "C7", "F6", "F5", "F4", "F1"],
+ "rows": ["B6", "D7", "B5", "B4"]
+ },
+ "diode_direction": "COL2ROW",
"processor": "atmega32u4",
"bootloader": "atmel-dfu",
"layouts": {
diff --git a/keyboards/handwired/swiftrax/walter/config.h b/keyboards/handwired/swiftrax/walter/config.h
index 7bfee265ab..5af5a9ff81 100644
--- a/keyboards/handwired/swiftrax/walter/config.h
+++ b/keyboards/handwired/swiftrax/walter/config.h
@@ -17,15 +17,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
#pragma once
-
-// ROWS: Top to bottom, COLS: Left to right
-
-#define MATRIX_ROW_PINS { B2, B1, F4, F1, F0 }
-#define MATRIX_COL_PINS { F5, C6, F6, F7, C7, B6, B5, B4, D7, D6, D4, D5, D3, D2, D1, D0 }
-
-/* COL2ROW or ROW2COL */
-#define DIODE_DIRECTION COL2ROW
-
#define RGB_DI_PIN E6
#define RGBLED_NUM 24
#define RGBLIGHT_EFFECT_BREATHING
diff --git a/keyboards/handwired/swiftrax/walter/info.json b/keyboards/handwired/swiftrax/walter/info.json
index 88da47f36b..0a6fd97837 100644
--- a/keyboards/handwired/swiftrax/walter/info.json
+++ b/keyboards/handwired/swiftrax/walter/info.json
@@ -8,6 +8,11 @@
"pid": "0xE964",
"device_version": "0.0.1"
},
+ "matrix_pins": {
+ "cols": ["F5", "C6", "F6", "F7", "C7", "B6", "B5", "B4", "D7", "D6", "D4", "D5", "D3", "D2", "D1", "D0"],
+ "rows": ["B2", "B1", "F4", "F1", "F0"]
+ },
+ "diode_direction": "COL2ROW",
"encoder": {
"rotary": [
{"pin_a": "B3", "pin_b": "B7"}
diff --git a/keyboards/handwired/symmetry60/config.h b/keyboards/handwired/symmetry60/config.h
index 7c1deda7d5..776749f54a 100644
--- a/keyboards/handwired/symmetry60/config.h
+++ b/keyboards/handwired/symmetry60/config.h
@@ -17,23 +17,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
#pragma once
-
-/*
- * Keyboard Matrix Assignments
- *
- * Change this to how you wired your keyboard
- * COLS: AVR pins used for columns, left to right
- * ROWS: AVR pins used for rows, top to bottom
- * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
- * ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
- *
-*/
-#define MATRIX_ROW_PINS { D0, D1, D2, D3, D5 }
-#define MATRIX_COL_PINS { F0, F1, F4, F5, F6, F7, C7, B6, B5, B4, D7, D6, D4, E6 }
-
-/* COL2ROW, ROW2COL*/
-#define DIODE_DIRECTION COL2ROW
-
#define RGB_DI_PIN B1
#ifdef RGB_DI_PIN
#define RGBLIGHT_EFFECT_BREATHING
diff --git a/keyboards/handwired/symmetry60/info.json b/keyboards/handwired/symmetry60/info.json
index 850ae03b35..6b6019821a 100644
--- a/keyboards/handwired/symmetry60/info.json
+++ b/keyboards/handwired/symmetry60/info.json
@@ -8,6 +8,11 @@
"pid": "0x0000",
"device_version": "0.0.1"
},
+ "matrix_pins": {
+ "cols": ["F0", "F1", "F4", "F5", "F6", "F7", "C7", "B6", "B5", "B4", "D7", "D6", "D4", "E6"],
+ "rows": ["D0", "D1", "D2", "D3", "D5"]
+ },
+ "diode_direction": "COL2ROW",
"processor": "atmega32u4",
"bootloader": "atmel-dfu",
"community_layouts": ["ortho_5x14"],
diff --git a/keyboards/handwired/t111/config.h b/keyboards/handwired/t111/config.h
deleted file mode 100644
index c5f41e5e05..0000000000
--- a/keyboards/handwired/t111/config.h
+++ /dev/null
@@ -1,44 +0,0 @@
-/*
-Copyright 2020 DmNosachev
-
-This program is free software: you can redistribute it and/or modify
-it under the terms of the GNU General Public License as published by
-the Free Software Foundation, either version 2 of the License, or
-(at your option) any later version.
-
-This program is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-GNU General Public License for more details.
-
-You should have received a copy of the GNU General Public License
-along with this program. If not, see <http://www.gnu.org/licenses/>.
-*/
-
-#pragma once
-
-
-#define MATRIX_ROW_PINS { A15, B6, B5, B4, B3, B9, B8, B7 }
-/* 0 1 2 3 4 5 6 7*/
-#define MATRIX_COL_PINS { B15, B11, B10, B1, B0, A10, A9, A7, A6, A5, A4, A8, B13, B14 }
-/* 0 1 2 3 4 5 6 7 8 9 A B C D*/
-
-
-/* COL2ROW, ROW2COL */
-#define DIODE_DIRECTION ROW2COL
-
-/*
- * Feature disable options
- * These options are also useful to firmware size reduction.
- */
-
-/* disable debug print */
-//#define NO_DEBUG
-
-/* disable print */
-//#define NO_PRINT
-
-/* disable action features */
-//#define NO_ACTION_LAYER
-//#define NO_ACTION_TAPPING
-//#define NO_ACTION_ONESHOT
diff --git a/keyboards/handwired/t111/info.json b/keyboards/handwired/t111/info.json
index 0b5c104618..f232a0ea33 100644
--- a/keyboards/handwired/t111/info.json
+++ b/keyboards/handwired/t111/info.json
@@ -8,6 +8,11 @@
"pid": "0x6FAA",
"device_version": "0.0.1"
},
+ "matrix_pins": {
+ "cols": ["B15", "B11", "B10", "B1", "B0", "A10", "A9", "A7", "A6", "A5", "A4", "A8", "B13", "B14"],
+ "rows": ["A15", "B6", "B5", "B4", "B3", "B9", "B8", "B7"]
+ },
+ "diode_direction": "ROW2COL",
"processor": "STM32F103",
"bootloader": "stm32duino",
"layouts": {
diff --git a/keyboards/handwired/tennie/config.h b/keyboards/handwired/tennie/config.h
index 71a51554f2..b24f5b8c97 100644
--- a/keyboards/handwired/tennie/config.h
+++ b/keyboards/handwired/tennie/config.h
@@ -17,23 +17,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
#pragma once
-
-/*
- * Keyboard Matrix Assignments
- *
- * Change this to how you wired your keyboard
- * COLS: AVR pins used for columns, left to right
- * ROWS: AVR pins used for rows, top to bottom
- * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
- * ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
- *
-*/
-#define MATRIX_ROW_PINS { C6, D4, D0}
-#define MATRIX_COL_PINS { D7, E6, B4, B5 }
-
-/* COL2ROW, ROW2COL */
-#define DIODE_DIRECTION COL2ROW
-
#define RGBW
#define RGB_DI_PIN D1
#ifdef RGB_DI_PIN
diff --git a/keyboards/handwired/tennie/info.json b/keyboards/handwired/tennie/info.json
index f2a8bcc1f9..a6e31cba07 100644
--- a/keyboards/handwired/tennie/info.json
+++ b/keyboards/handwired/tennie/info.json
@@ -8,6 +8,11 @@
"pid": "0x1313",
"device_version": "0.0.1"
},
+ "matrix_pins": {
+ "cols": ["D7", "E6", "B4", "B5"],
+ "rows": ["C6", "D4", "D0"]
+ },
+ "diode_direction": "COL2ROW",
"processor": "atmega32u4",
"bootloader": "caterina",
"layouts": {
diff --git a/keyboards/handwired/terminus_mini/config.h b/keyboards/handwired/terminus_mini/config.h
index 63e11e97af..50ee7eac61 100644
--- a/keyboards/handwired/terminus_mini/config.h
+++ b/keyboards/handwired/terminus_mini/config.h
@@ -17,23 +17,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
#pragma once
-
-/*
- * Keyboard Matrix Assignments
- *
- * Change this to how you wired your keyboard
- * COLS: AVR pins used for columns, left to right
- * ROWS: AVR pins used for rows, top to bottom
- * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
- * ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
- *
-*/
-#define MATRIX_ROW_PINS { B5, B4, D7, D6 }
-#define MATRIX_COL_PINS { B0, D0, D5, B6, D4, C7, F7, F6, F5, F4, F1, F0 }
-
-/* COL2ROW, ROW2COL*/
-#define DIODE_DIRECTION COL2ROW
-
//define tapping-toggle count
#define TAPPING_TOGGLE 1
diff --git a/keyboards/handwired/terminus_mini/info.json b/keyboards/handwired/terminus_mini/info.json
index c059e9af7e..bb8214b97d 100644
--- a/keyboards/handwired/terminus_mini/info.json
+++ b/keyboards/handwired/terminus_mini/info.json
@@ -8,6 +8,11 @@
"pid": "0x6060",
"device_version": "0.0.1"
},
+ "matrix_pins": {
+ "cols": ["B0", "D0", "D5", "B6", "D4", "C7", "F7", "F6", "F5", "F4", "F1", "F0"],
+ "rows": ["B5", "B4", "D7", "D6"]
+ },
+ "diode_direction": "COL2ROW",
"processor": "atmega32u4",
"bootloader": "halfkay",
"layouts": {
diff --git a/keyboards/handwired/trackpoint/config.h b/keyboards/handwired/trackpoint/config.h
index e42a53eeb8..8d4e88d3cb 100644
--- a/keyboards/handwired/trackpoint/config.h
+++ b/keyboards/handwired/trackpoint/config.h
@@ -37,11 +37,5 @@
#define PS2_USART_RX_VECT USART1_RX_vect
#endif
-#define MATRIX_COL_PINS { F1, F4, F5 }
-#define MATRIX_ROW_PINS { F0 }
-
-/* COL2ROW or ROW2COL */
-#define DIODE_DIRECTION COL2ROW
-
#define LOCKING_SUPPORT_ENABLE
#define LOCKING_RESYNC_ENABLE
diff --git a/keyboards/handwired/trackpoint/info.json b/keyboards/handwired/trackpoint/info.json
index b0c0848ca6..a1778c2220 100644
--- a/keyboards/handwired/trackpoint/info.json
+++ b/keyboards/handwired/trackpoint/info.json
@@ -8,6 +8,11 @@
"pid": "0x5678",
"device_version": "0.0.1"
},
+ "matrix_pins": {
+ "cols": ["F1", "F4", "F5"],
+ "rows": ["F0"]
+ },
+ "diode_direction": "COL2ROW",
"processor": "atmega32u4",
"bootloader": "halfkay",
"layouts": {
diff --git a/keyboards/handwired/tractyl_manuform/4x6_right/config.h b/keyboards/handwired/tractyl_manuform/4x6_right/config.h
index f602a26b42..971e75680e 100644
--- a/keyboards/handwired/tractyl_manuform/4x6_right/config.h
+++ b/keyboards/handwired/tractyl_manuform/4x6_right/config.h
@@ -18,13 +18,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
#pragma once
-
-// wiring of each half
-#define MATRIX_COL_PINS { C0, C1, C2, C3, C4, C5 }
-#define MATRIX_ROW_PINS { A0, A1, A2, A3, A4 }
-
-#define DIODE_DIRECTION COL2ROW
-
// WS2812 RGB LED strip input and number of LEDs
#define RGB_DI_PIN E7
#define RGB_MATRIX_LED_COUNT 62
diff --git a/keyboards/handwired/tractyl_manuform/4x6_right/info.json b/keyboards/handwired/tractyl_manuform/4x6_right/info.json
index ab4b08c8eb..e0123bb019 100644
--- a/keyboards/handwired/tractyl_manuform/4x6_right/info.json
+++ b/keyboards/handwired/tractyl_manuform/4x6_right/info.json
@@ -6,6 +6,11 @@
"pid": "0x3537",
"device_version": "0.0.1"
},
+ "matrix_pins": {
+ "cols": ["C0", "C1", "C2", "C3", "C4", "C5"],
+ "rows": ["A0", "A1", "A2", "A3", "A4"]
+ },
+ "diode_direction": "COL2ROW",
"split": {
"soft_serial_pin": "D3",
"bootmagic": {
diff --git a/keyboards/handwired/tractyl_manuform/5x6_right/arduinomicro/config.h b/keyboards/handwired/tractyl_manuform/5x6_right/arduinomicro/config.h
index 902f292b10..f77cc8f309 100644
--- a/keyboards/handwired/tractyl_manuform/5x6_right/arduinomicro/config.h
+++ b/keyboards/handwired/tractyl_manuform/5x6_right/arduinomicro/config.h
@@ -18,16 +18,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
#pragma once
-// wiring of each half
-// left
-#define MATRIX_COL_PINS { D4, C6, D7, E6, B4, B5 }
-#define MATRIX_ROW_PINS { F6, F7, B1, B3, B2, B6 }
-// right
-#define MATRIX_COL_PINS_RIGHT { D6, D7, B4, D3, C6, C7 }
-#define MATRIX_ROW_PINS_RIGHT { D4, B7, F7, B6, B5, F6 }
-
-#define DIODE_DIRECTION COL2ROW
-
//#undef USE_I2C
#define MASTER_RIGHT
diff --git a/keyboards/handwired/tractyl_manuform/5x6_right/arduinomicro/info.json b/keyboards/handwired/tractyl_manuform/5x6_right/arduinomicro/info.json
index e58e87b2dd..eebc5d5546 100644
--- a/keyboards/handwired/tractyl_manuform/5x6_right/arduinomicro/info.json
+++ b/keyboards/handwired/tractyl_manuform/5x6_right/arduinomicro/info.json
@@ -1,7 +1,18 @@
{
"keyboard_name": "Tractyl Manuform(5x6) Arduino Micro (r)/ Pro Micro (l)",
+ "matrix_pins": {
+ "cols": ["D4", "C6", "D7", "E6", "B4", "B5"],
+ "rows": ["F6", "F7", "B1", "B3", "B2", "B6"]
+ },
+ "diode_direction": "COL2ROW",
"split": {
- "soft_serial_pin": "D0"
+ "soft_serial_pin": "D0",
+ "matrix_pins": {
+ "right": {
+ "cols": ["D6", "D7", "B4", "D3", "C6", "C7"],
+ "rows": ["D4", "B7", "F7", "B6", "B5", "F6"]
+ }
+ }
},
"processor": "atmega32u4",
"bootloader": "caterina"
diff --git a/keyboards/handwired/tractyl_manuform/5x6_right/elite_c/config.h b/keyboards/handwired/tractyl_manuform/5x6_right/elite_c/config.h
index c52610e9d3..b472107f42 100644
--- a/keyboards/handwired/tractyl_manuform/5x6_right/elite_c/config.h
+++ b/keyboards/handwired/tractyl_manuform/5x6_right/elite_c/config.h
@@ -18,14 +18,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
#pragma once
-// wiring of each half
-#define MATRIX_COL_PINS \
- { D4, D7, E6, B4, B5, B7 }
-#define MATRIX_ROW_PINS \
- { F7, F6, F5, F4, F1, F0 }
-
-#define DIODE_DIRECTION COL2ROW
-
// WS2812 RGB LED strip input and number of LEDs
#define RGB_DI_PIN D3
#define RGBLED_NUM 20
diff --git a/keyboards/handwired/tractyl_manuform/5x6_right/elite_c/info.json b/keyboards/handwired/tractyl_manuform/5x6_right/elite_c/info.json
index dabab602dd..7300efd02b 100644
--- a/keyboards/handwired/tractyl_manuform/5x6_right/elite_c/info.json
+++ b/keyboards/handwired/tractyl_manuform/5x6_right/elite_c/info.json
@@ -1,5 +1,10 @@
{
"keyboard_name": "Tractyl Manuform (5x6) Elite-C",
+ "matrix_pins": {
+ "cols": ["D4", "D7", "E6", "B4", "B5", "B7"],
+ "rows": ["F7", "F6", "F5", "F4", "F1", "F0"]
+ },
+ "diode_direction": "COL2ROW",
"encoder": {
"rotary": [
{"pin_a": "D5", "pin_b": "C7"}
diff --git a/keyboards/handwired/tractyl_manuform/5x6_right/f303/config.h b/keyboards/handwired/tractyl_manuform/5x6_right/f303/config.h
index d10cb0bd8b..5ca6f5d958 100644
--- a/keyboards/handwired/tractyl_manuform/5x6_right/f303/config.h
+++ b/keyboards/handwired/tractyl_manuform/5x6_right/f303/config.h
@@ -18,17 +18,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
#pragma once
-// wiring of each half
-#define MATRIX_COL_PINS \
- { B0, B1, B2, B3, B4, B5 }
-#define MATRIX_ROW_PINS \
- { B10, B11, B12, A14, A13, A15 }
-// B2 used for BOOT1, has internal pull down?
-// A9 has internal pull-down
-// A11 and A12 are used for USB sense. DO NOT USE.
-
-#define DIODE_DIRECTION COL2ROW
-
// #define USB_VBUS_PIN B10
#define SPLIT_HAND_PIN C14 // high = left, low = right
diff --git a/keyboards/handwired/tractyl_manuform/5x6_right/f303/info.json b/keyboards/handwired/tractyl_manuform/5x6_right/f303/info.json
index bed70941bf..34357594de 100644
--- a/keyboards/handwired/tractyl_manuform/5x6_right/f303/info.json
+++ b/keyboards/handwired/tractyl_manuform/5x6_right/f303/info.json
@@ -1,5 +1,10 @@
{
"keyboard_name": "Tractyl Manuform (5x6) Proton-C",
+ "matrix_pins": {
+ "cols": ["B0", "B1", "B2", "B3", "B4", "B5"],
+ "rows": ["B10", "B11", "B12", "A14", "A13", "A15"]
+ },
+ "diode_direction": "COL2ROW",
"encoder": {
"rotary": [
{"pin_a": "A7", "pin_b": "A8"}
diff --git a/keyboards/handwired/tractyl_manuform/5x6_right/f411/config.h b/keyboards/handwired/tractyl_manuform/5x6_right/f411/config.h
index 227863aaa5..d562a2a41c 100644
--- a/keyboards/handwired/tractyl_manuform/5x6_right/f411/config.h
+++ b/keyboards/handwired/tractyl_manuform/5x6_right/f411/config.h
@@ -18,14 +18,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
#pragma once
-// wiring of each half
-#define MATRIX_COL_PINS \
- { A15, B3, B4, B5, B6, B7 }
-#define MATRIX_ROW_PINS \
- { B12, B13, B14, B15, A8, A10 }
-
-#define DIODE_DIRECTION COL2ROW
-
// #define USB_VBUS_PIN B10 // doesn't seem to work for me on one of my controllers... */
#define SPLIT_HAND_PIN C14 // high = left, low = right
diff --git a/keyboards/handwired/tractyl_manuform/5x6_right/f411/info.json b/keyboards/handwired/tractyl_manuform/5x6_right/f411/info.json
index 0791e50ebf..034170e6a3 100644
--- a/keyboards/handwired/tractyl_manuform/5x6_right/f411/info.json
+++ b/keyboards/handwired/tractyl_manuform/5x6_right/f411/info.json
@@ -1,5 +1,10 @@
{
"keyboard_name": "Tractyl Manuform (5x6) BlackPill",
+ "matrix_pins": {
+ "cols": ["A15", "B3", "B4", "B5", "B6", "B7"],
+ "rows": ["B12", "B13", "B14", "B15", "A8", "A10"]
+ },
+ "diode_direction": "COL2ROW",
"encoder": {
"rotary": [
{"pin_a": "A13", "pin_b": "A14"}
diff --git a/keyboards/handwired/tractyl_manuform/5x6_right/teensy2pp/config.h b/keyboards/handwired/tractyl_manuform/5x6_right/teensy2pp/config.h
index 51ff0d3123..069b6e876c 100644
--- a/keyboards/handwired/tractyl_manuform/5x6_right/teensy2pp/config.h
+++ b/keyboards/handwired/tractyl_manuform/5x6_right/teensy2pp/config.h
@@ -18,14 +18,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
#pragma once
-// wiring of each half
-#define MATRIX_COL_PINS \
- { C0, C1, C2, C3, C4, C5 }
-#define MATRIX_ROW_PINS \
- { F7, F6, F5, F4, F3, F2 }
-
-#define DIODE_DIRECTION COL2ROW
-
// WS2812 RGB LED strip input and number of LEDs
#define RGB_DI_PIN E7
#define RGBLED_NUM 20
diff --git a/keyboards/handwired/tractyl_manuform/5x6_right/teensy2pp/info.json b/keyboards/handwired/tractyl_manuform/5x6_right/teensy2pp/info.json
index 7f60ae0edc..facf346943 100644
--- a/keyboards/handwired/tractyl_manuform/5x6_right/teensy2pp/info.json
+++ b/keyboards/handwired/tractyl_manuform/5x6_right/teensy2pp/info.json
@@ -1,5 +1,10 @@
{
"keyboard_name": "Tractyl Manuform (5x6) Teensy 2.0++",
+ "matrix_pins": {
+ "cols": ["C0", "C1", "C2", "C3", "C4", "C5"],
+ "rows": ["F7", "F6", "F5", "F4", "F3", "F2"]
+ },
+ "diode_direction": "COL2ROW",
"encoder": {
"rotary": [
{"pin_a": "D5", "pin_b": "D4"}
diff --git a/keyboards/handwired/traveller/config.h b/keyboards/handwired/traveller/config.h
index bd0d306dc3..4c71623b24 100644
--- a/keyboards/handwired/traveller/config.h
+++ b/keyboards/handwired/traveller/config.h
@@ -17,23 +17,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
#pragma once
-
-/*
- * Keyboard Matrix Assignments
- *
- * Change this to how you wired your keyboard
- * COLS: AVR pins used for columns, left to right
- * ROWS: AVR pins used for rows, top to bottom
- * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
- * ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
- *
- */
-#define MATRIX_ROW_PINS { D0, D1, D3, D2 }
-#define MATRIX_COL_PINS { B5, D6, B7, B6, F6, B1, B3, F7, B4, E6, D7, C6, D4 }
-
-/* COL2ROW or ROW2COL */
-#define DIODE_DIRECTION COL2ROW
-
#define RGB_DI_PIN B2
#ifdef RGB_DI_PIN
# define RGBLED_NUM 1
diff --git a/keyboards/handwired/traveller/info.json b/keyboards/handwired/traveller/info.json
index ee064ad0cc..9c7270c6de 100644
--- a/keyboards/handwired/traveller/info.json
+++ b/keyboards/handwired/traveller/info.json
@@ -8,6 +8,11 @@
"pid": "0x6060",
"device_version": "0.0.1"
},
+ "matrix_pins": {
+ "cols": ["B5", "D6", "B7", "B6", "F6", "B1", "B3", "F7", "B4", "E6", "D7", "C6", "D4"],
+ "rows": ["D0", "D1", "D3", "D2"]
+ },
+ "diode_direction": "COL2ROW",
"processor": "atmega32u4",
"bootloader": "caterina",
"layouts": {
diff --git a/keyboards/handwired/tritium_numpad/config.h b/keyboards/handwired/tritium_numpad/config.h
index 5782f0e058..e2db822d67 100644
--- a/keyboards/handwired/tritium_numpad/config.h
+++ b/keyboards/handwired/tritium_numpad/config.h
@@ -17,15 +17,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
#pragma once
-
-// ROWS: Top to bottom, COLS: Left to right
-
-#define MATRIX_ROW_PINS { D1, D0, D4, C6, D7, E6 }
-#define MATRIX_COL_PINS { F4, F6, B1, B2 }
-
-/* COL2ROW or ROW2COL */
-#define DIODE_DIRECTION COL2ROW
-
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
#define LOCKING_SUPPORT_ENABLE
/* Locking resynchronize hack */
diff --git a/keyboards/handwired/tritium_numpad/info.json b/keyboards/handwired/tritium_numpad/info.json
index b2ca85264e..f152b8bb5b 100644
--- a/keyboards/handwired/tritium_numpad/info.json
+++ b/keyboards/handwired/tritium_numpad/info.json
@@ -8,6 +8,11 @@
"pid": "0x6060",
"device_version": "0.0.3"
},
+ "matrix_pins": {
+ "cols": ["F4", "F6", "B1", "B2"],
+ "rows": ["D1", "D0", "D4", "C6", "D7", "E6"]
+ },
+ "diode_direction": "COL2ROW",
"backlight": {
"pin": "B6",
"levels": 4
diff --git a/keyboards/handwired/twadlee/tp69/config.h b/keyboards/handwired/twadlee/tp69/config.h
index 7c1079397a..390c13b55c 100644
--- a/keyboards/handwired/twadlee/tp69/config.h
+++ b/keyboards/handwired/twadlee/tp69/config.h
@@ -17,26 +17,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
#pragma once
-
-/*
- * Keyboard Matrix Assignments
- *
- * Change this to how you wired your keyboard
- * COLS: AVR pins used for columns, left to right
- * ROWS: AVR pins used for rows, top to bottom
- * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
- * ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
- */
-/* 19 17 16 15 14 2 8 6 7 9 */
-#define MATRIX_ROW_PINS { B2, B1, B0, C0, D1, D0, D3, D4, D2, C3 }
-/* 20 21 18 0 1 3 4 5 */
-#define MATRIX_COL_PINS { D5, D6, A4, B16, B17, A1, A2, D7 }
-
-/* for trackpoint: C1 (22) C2 (23) */
-
-/* COL2ROW, ROW2COL*/
-#define DIODE_DIRECTION COL2ROW
-
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
#define LOCKING_SUPPORT_ENABLE
/* Locking resynchronize hack */
diff --git a/keyboards/handwired/twadlee/tp69/info.json b/keyboards/handwired/twadlee/tp69/info.json
index a06580eadd..75c11c44c2 100644
--- a/keyboards/handwired/twadlee/tp69/info.json
+++ b/keyboards/handwired/twadlee/tp69/info.json
@@ -8,6 +8,11 @@
"pid": "0xCACA",
"device_version": "0.0.1"
},
+ "matrix_pins": {
+ "cols": ["D5", "D6", "A4", "B16", "B17", "A1", "A2", "D7"],
+ "rows": ["B2", "B1", "B0", "C0", "D1", "D0", "D3", "D4", "D2", "C3"]
+ },
+ "diode_direction": "COL2ROW",
"processor": "MKL26Z64",
"bootloader": "halfkay",
"layouts": {
diff --git a/keyboards/handwired/twig/twig50/config.h b/keyboards/handwired/twig/twig50/config.h
index 59a6a26c44..25236b2a2f 100644
--- a/keyboards/handwired/twig/twig50/config.h
+++ b/keyboards/handwired/twig/twig50/config.h
@@ -3,12 +3,6 @@
#pragma once
-
-#define MATRIX_ROW_PINS { B7, B6, B5, B4 }
-#define MATRIX_COL_PINS { A2, A1, A0, B8 , B13, B14, B15, B9, B10, B11, B3, B2, B1, B0}
-
-#define DIODE_DIRECTION COL2ROW
-
#define TAPPING_TERM 150
#define FORCE_NKRO
diff --git a/keyboards/handwired/twig/twig50/info.json b/keyboards/handwired/twig/twig50/info.json
index aae4bfa531..a6a6c2e1a3 100644
--- a/keyboards/handwired/twig/twig50/info.json
+++ b/keyboards/handwired/twig/twig50/info.json
@@ -8,6 +8,11 @@
"pid": "0x6060",
"device_version": "0.2.1"
},
+ "matrix_pins": {
+ "cols": ["A2", "A1", "A0", "B8", "B13", "B14", "B15", "B9", "B10", "B11", "B3", "B2", "B1", "B0"],
+ "rows": ["B7", "B6", "B5", "B4"]
+ },
+ "diode_direction": "COL2ROW",
"processor": "STM32F303",
"bootloader": "stm32-dfu",
"board": "QMK_PROTON_C",
diff --git a/keyboards/handwired/unicomp_mini_m/config.h b/keyboards/handwired/unicomp_mini_m/config.h
index f48e5ae696..fc62f69c4b 100644
--- a/keyboards/handwired/unicomp_mini_m/config.h
+++ b/keyboards/handwired/unicomp_mini_m/config.h
@@ -17,22 +17,5 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
#pragma once
-
-/*
- * Keyboard Matrix Assignments
- *
- * Change this to how you wired your keyboard
- * COLS: AVR pins used for columns, left to right
- * ROWS: AVR pins used for rows, top to bottom
- * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
- * ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
- *
-*/
-#define MATRIX_ROW_PINS { F7, F6, F5, F4, F3, F2, F1, F0, E6, E7, B0, B1 }
-#define MATRIX_COL_PINS { C7, C6, C5, C4, C3, C2, C1, C0, E1, E0, D7, B7, D5, D4, D3, D2 }
-
-/* COL2ROW, ROW2COL*/
-#define DIODE_DIRECTION ROW2COL
-
/* The Mini M has no diodes */
#define MATRIX_HAS_GHOST
diff --git a/keyboards/handwired/unicomp_mini_m/info.json b/keyboards/handwired/unicomp_mini_m/info.json
index 7216203ba8..9dd8d59b59 100644
--- a/keyboards/handwired/unicomp_mini_m/info.json
+++ b/keyboards/handwired/unicomp_mini_m/info.json
@@ -8,6 +8,11 @@
"pid": "0x0000",
"device_version": "0.0.1"
},
+ "matrix_pins": {
+ "cols": ["C7", "C6", "C5", "C4", "C3", "C2", "C1", "C0", "E1", "E0", "D7", "B7", "D5", "D4", "D3", "D2"],
+ "rows": ["F7", "F6", "F5", "F4", "F3", "F2", "F1", "F0", "E6", "E7", "B0", "B1"]
+ },
+ "diode_direction": "ROW2COL",
"indicators": {
"caps_lock": "B5",
"num_lock": "B6",
diff --git a/keyboards/handwired/unk/rev1/config.h b/keyboards/handwired/unk/rev1/config.h
index c6674b53f7..177ad60ecd 100644
--- a/keyboards/handwired/unk/rev1/config.h
+++ b/keyboards/handwired/unk/rev1/config.h
@@ -20,16 +20,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
#define MASTER_LEFT // Comment this line for the right half firmware
-// wiring of each half
-#define MATRIX_ROW_PINS { F5, B1, F6, B3, F7 }
-#define MATRIX_COL_PINS { B2, B6, D4, C6, D7, E6, B4, B5 }
-#define MATRIX_ROW_PINS_RIGHT { C6, D7, B4, E6, D4 }
-#define MATRIX_COL_PINS_RIGHT { B1, B3, B2, B6, F7, B5, F6, F5 }
-
-
-/* COL2ROW or ROW2COL */
-#define DIODE_DIRECTION COL2ROW
-
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
#define LOCKING_SUPPORT_ENABLE
/* Locking resynchronize hack */
diff --git a/keyboards/handwired/unk/rev1/info.json b/keyboards/handwired/unk/rev1/info.json
index bb6031cfd0..1faa61b706 100644
--- a/keyboards/handwired/unk/rev1/info.json
+++ b/keyboards/handwired/unk/rev1/info.json
@@ -8,8 +8,19 @@
"pid": "0x3060",
"device_version": "0.0.1"
},
+ "matrix_pins": {
+ "cols": ["B2", "B6", "D4", "C6", "D7", "E6", "B4", "B5"],
+ "rows": ["F5", "B1", "F6", "B3", "F7"]
+ },
+ "diode_direction": "COL2ROW",
"split": {
- "soft_serial_pin": "D0"
+ "soft_serial_pin": "D0",
+ "matrix_pins": {
+ "right": {
+ "cols": ["B1", "B3", "B2", "B6", "F7", "B5", "F6", "F5"],
+ "rows": ["C6", "D7", "B4", "E6", "D4"]
+ }
+ }
},
"processor": "atmega32u4",
"bootloader": "caterina",
diff --git a/keyboards/handwired/uthol/config.h b/keyboards/handwired/uthol/config.h
deleted file mode 100644
index 5e6816b6b0..0000000000
--- a/keyboards/handwired/uthol/config.h
+++ /dev/null
@@ -1,21 +0,0 @@
-/*
- * Copyright 2022 Uthol
- *
- * This program is free software: you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation, either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program. If not, see <http://www.gnu.org/licenses/>.
- */
-
-#pragma once
-
-
-#define DIODE_DIRECTION COL2ROW
diff --git a/keyboards/handwired/uthol/rev1/config.h b/keyboards/handwired/uthol/rev1/config.h
deleted file mode 100644
index b5e17a0fe3..0000000000
--- a/keyboards/handwired/uthol/rev1/config.h
+++ /dev/null
@@ -1,23 +0,0 @@
-/*
- * Copyright 2022 Uthol
- *
- * This program is free software: you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation, either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program. If not, see <http://www.gnu.org/licenses/>.
- */
-
-#pragma once
-
-
-/* Uthol PCB default pin-out */
-#define MATRIX_ROW_PINS { D1, D0, D4, C6, D7 }
-#define MATRIX_COL_PINS { D3, B6, B2, B3, B1, F7, F6, F5, F4, B5, B4, D2 }
diff --git a/keyboards/handwired/uthol/rev1/info.json b/keyboards/handwired/uthol/rev1/info.json
index 1a0047080a..02802966b2 100644
--- a/keyboards/handwired/uthol/rev1/info.json
+++ b/keyboards/handwired/uthol/rev1/info.json
@@ -3,6 +3,11 @@
"usb": {
"device_version": "0.0.1"
},
+ "matrix_pins": {
+ "cols": ["D3", "B6", "B2", "B3", "B1", "F7", "F6", "F5", "F4", "B5", "B4", "D2"],
+ "rows": ["D1", "D0", "D4", "C6", "D7"]
+ },
+ "diode_direction": "COL2ROW",
"processor": "atmega32u4",
"bootloader": "caterina"
}
diff --git a/keyboards/handwired/uthol/rev2/config.h b/keyboards/handwired/uthol/rev2/config.h
index dd132283c3..744e66d948 100644
--- a/keyboards/handwired/uthol/rev2/config.h
+++ b/keyboards/handwired/uthol/rev2/config.h
@@ -17,11 +17,6 @@
#pragma once
-
-/* Uthol PCB default pin-out */
-#define MATRIX_ROW_PINS { B1, F7, F6, F5, F4 }
-#define MATRIX_COL_PINS { D3, D2, D1, D0, D4, C6, D7, B5, B4, B6, B2, B3 }
-
//RGB Stuff
#define RGB_DI_PIN E6
#define RGBLED_NUM 39
diff --git a/keyboards/handwired/uthol/rev2/info.json b/keyboards/handwired/uthol/rev2/info.json
index 95112123d5..bcefbb4956 100644
--- a/keyboards/handwired/uthol/rev2/info.json
+++ b/keyboards/handwired/uthol/rev2/info.json
@@ -3,6 +3,11 @@
"usb": {
"device_version": "0.0.2"
},
+ "matrix_pins": {
+ "cols": ["D3", "D2", "D1", "D0", "D4", "C6", "D7", "B5", "B4", "B6", "B2", "B3"],
+ "rows": ["B1", "F7", "F6", "F5", "F4"]
+ },
+ "diode_direction": "COL2ROW",
"processor": "atmega32u4",
"bootloader": "caterina"
}
diff --git a/keyboards/handwired/uthol/rev3/config.h b/keyboards/handwired/uthol/rev3/config.h
index 1e6b532e2a..d7829f2fdc 100644
--- a/keyboards/handwired/uthol/rev3/config.h
+++ b/keyboards/handwired/uthol/rev3/config.h
@@ -17,14 +17,6 @@
#pragma once
-
-/* key matrix size */
-// A11 and A12 dont work. They are reserved for USB. B2 is reserved for BOOT1
-#define MATRIX_COL_PINS \
- { B1, B10, B9, B8, B5, B4, B3, A15, B15, B14, B13, B12 }
-#define MATRIX_ROW_PINS \
- { A4, A3, A2, A1, A0 }
-
// OLED config
#define OLED_DISPLAY_128X64
#define OLED_DISPLAY_WIDTH 128
diff --git a/keyboards/handwired/uthol/rev3/info.json b/keyboards/handwired/uthol/rev3/info.json
index b5d099b27a..34c0a3503a 100644
--- a/keyboards/handwired/uthol/rev3/info.json
+++ b/keyboards/handwired/uthol/rev3/info.json
@@ -3,6 +3,11 @@
"usb": {
"device_version": "0.0.3"
},
+ "matrix_pins": {
+ "cols": ["B1", "B10", "B9", "B8", "B5", "B4", "B3", "A15", "B15", "B14", "B13", "B12"],
+ "rows": ["A4", "A3", "A2", "A1", "A0"]
+ },
+ "diode_direction": "COL2ROW",
"encoder": {
"rotary": [
{"pin_a": "C15", "pin_b": "C14", "resolution": 2}
diff --git a/keyboards/handwired/videowriter/config.h b/keyboards/handwired/videowriter/config.h
index b519d82153..d1f1e1b0bf 100644
--- a/keyboards/handwired/videowriter/config.h
+++ b/keyboards/handwired/videowriter/config.h
@@ -17,23 +17,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
#pragma once
-
-/*
- * Keyboard Matrix Assignments
- *
- * Change this to how you wired your keyboard
- * COLS: AVR pins used for columns, left to right
- * ROWS: AVR pins used for rows, top to bottom
- * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
- * ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
- *
- */
-#define MATRIX_ROW_PINS { D7, C6, D1, D0, D4, D2, D3, E6, B4, B5 }
-#define MATRIX_COL_PINS { F4, F5, F6, F7, B1, B3, B2, B6 }
-
-/* COL2ROW, ROW2COL*/
-#define DIODE_DIRECTION COL2ROW
-
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
#define LOCKING_SUPPORT_ENABLE
/* Locking resynchronize hack */
diff --git a/keyboards/handwired/videowriter/info.json b/keyboards/handwired/videowriter/info.json
index 329085fe85..bc04ac2b8a 100644
--- a/keyboards/handwired/videowriter/info.json
+++ b/keyboards/handwired/videowriter/info.json
@@ -8,6 +8,11 @@
"pid": "0x5657",
"device_version": "0.0.1"
},
+ "matrix_pins": {
+ "cols": ["F4", "F5", "F6", "F7", "B1", "B3", "B2", "B6"],
+ "rows": ["D7", "C6", "D1", "D0", "D4", "D2", "D3", "E6", "B4", "B5"]
+ },
+ "diode_direction": "COL2ROW",
"bootmagic": {
"matrix": [1, 7]
},
diff --git a/keyboards/handwired/wabi/config.h b/keyboards/handwired/wabi/config.h
index 69da1bc47c..274c715a93 100644
--- a/keyboards/handwired/wabi/config.h
+++ b/keyboards/handwired/wabi/config.h
@@ -14,25 +14,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
#pragma once
-
-/*
- * Keyboard Matrix Assignments
- *
- * Change this to how you wired your keyboard
- * COLS: AVR pins used for columns, left to right
- * ROWS: AVR pins used for rows, top to bottom
- * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on
-diode)
- * ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
- *
- */
-
-#define MATRIX_ROW_PINS { D5, F5, F6, F7, B0 }
-#define MATRIX_COL_PINS { F4, F1, F0, E6, B3, B7, D0, D1, D2, D3, D4, D6, D7, B5 }
-
-/* COL2ROW, ROW2COL*/
-#define DIODE_DIRECTION COL2ROW
-
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
#define LOCKING_SUPPORT_ENABLE
/* Locking resynchronize hack */
diff --git a/keyboards/handwired/wabi/info.json b/keyboards/handwired/wabi/info.json
index a93666554d..6f9fb6cb93 100644
--- a/keyboards/handwired/wabi/info.json
+++ b/keyboards/handwired/wabi/info.json
@@ -8,6 +8,11 @@
"pid": "0xB07D",
"device_version": "0.0.2"
},
+ "matrix_pins": {
+ "cols": ["F4", "F1", "F0", "E6", "B3", "B7", "D0", "D1", "D2", "D3", "D4", "D6", "D7", "B5"],
+ "rows": ["D5", "F5", "F6", "F7", "B0"]
+ },
+ "diode_direction": "COL2ROW",
"processor": "atmega32u4",
"bootloader": "atmel-dfu",
"layouts": {
diff --git a/keyboards/handwired/woodpad/config.h b/keyboards/handwired/woodpad/config.h
index 4609f67ea7..9113106abf 100644
--- a/keyboards/handwired/woodpad/config.h
+++ b/keyboards/handwired/woodpad/config.h
@@ -17,23 +17,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
#pragma once
-
-/*
- * Keyboard Matrix Assignments
- *
- * Change this to how you wired your keyboard
- * COLS: AVR pins used for columns, left to right
- * ROWS: AVR pins used for rows, top to bottom
- * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
- * ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
- *
- */
-#define MATRIX_ROW_PINS { D1, D0, D4, C6, D7 }
-#define MATRIX_COL_PINS { B1, B3, B2, B6 }
-
-/* COL2ROW, ROW2COL */
-#define DIODE_DIRECTION COL2ROW
-
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
#define LOCKING_SUPPORT_ENABLE
/* Locking resynchronize hack */
diff --git a/keyboards/handwired/woodpad/info.json b/keyboards/handwired/woodpad/info.json
index c31bca5e09..de084c3c1f 100644
--- a/keyboards/handwired/woodpad/info.json
+++ b/keyboards/handwired/woodpad/info.json
@@ -8,6 +8,11 @@
"pid": "0x6069",
"device_version": "0.0.1"
},
+ "matrix_pins": {
+ "cols": ["B1", "B3", "B2", "B6"],
+ "rows": ["D1", "D0", "D4", "C6", "D7"]
+ },
+ "diode_direction": "COL2ROW",
"processor": "atmega32u4",
"bootloader": "caterina",
"community_layouts": ["ortho_5x4"],
diff --git a/keyboards/handwired/wulkan/config.h b/keyboards/handwired/wulkan/config.h
index 36d848fc8b..1c801d7e3c 100644
--- a/keyboards/handwired/wulkan/config.h
+++ b/keyboards/handwired/wulkan/config.h
@@ -1,9 +1,3 @@
#pragma once
-
-#define MATRIX_ROW_PINS { B8, A0, A1, A2 }
-#define MATRIX_COL_PINS { B13, B14, B15, B9, B7, B6, B5, B4, B3, B2, B1, B0 }
-
-#define DIODE_DIRECTION COL2ROW
-
#define FORCE_NKRO
diff --git a/keyboards/handwired/wulkan/info.json b/keyboards/handwired/wulkan/info.json
index 09907a556b..fcfaa31914 100644
--- a/keyboards/handwired/wulkan/info.json
+++ b/keyboards/handwired/wulkan/info.json
@@ -8,6 +8,11 @@
"pid": "0x6060",
"device_version": "0.0.1"
},
+ "matrix_pins": {
+ "cols": ["B13", "B14", "B15", "B9", "B7", "B6", "B5", "B4", "B3", "B2", "B1", "B0"],
+ "rows": ["B8", "A0", "A1", "A2"]
+ },
+ "diode_direction": "COL2ROW",
"processor": "STM32F303",
"bootloader": "stm32-dfu",
"board": "QMK_PROTON_C",
diff --git a/keyboards/handwired/xealous/config.h b/keyboards/handwired/xealous/config.h
index 7019bf461f..72e031c8de 100644
--- a/keyboards/handwired/xealous/config.h
+++ b/keyboards/handwired/xealous/config.h
@@ -27,9 +27,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
//#define DEBUG_MATRIX_SCAN_RATE //Use this to determine scan-rate.
#define FORCE_NKRO
-#define DIODE_DIRECTION COL2ROW
-
-
#ifdef AUDIO_ENABLE
#define AUDIO_PIN C6
#define STARTUP_SONG SONG(STARTUP_SOUND)
diff --git a/keyboards/handwired/xealous/rev1/config.h b/keyboards/handwired/xealous/rev1/config.h
index 17497c5ccd..9910669457 100644
--- a/keyboards/handwired/xealous/rev1/config.h
+++ b/keyboards/handwired/xealous/rev1/config.h
@@ -18,28 +18,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
#pragma once
-
-// wiring of each half
-// Ascii art of pro micro. Pin names PD3, PD2, etc.
-//Usage| Name | Label Label| Name | Usage
-// PORT
-// | PD3 TX0 RAW |
-// | PD2 RX1 GND |SerGnd
-// | GND RESET |
-// | GND VCC |SerVCc
-// | PD1 2 A3 PF4 | Col7
-//Ser | PD0 3 A2 PF5 | Col6
-//Row4 | PD4 4 A1 PF6 | Col5
-//AUDIO| PC6 5 A0 PF7 | Col4
-//Row3 | PD7 6 15 PB1 | Col3
-//Row2 | PE6 7 14 PB3 | Col2
-//Row1 | PB4 8 13 PB2 | Col1
-//Row0 | PB5 9 10 PB6 | Col0
-
-// Note reservation of C6 for audio
-#define MATRIX_ROW_PINS { B5, B4, E6, D7, D4 }
-#define MATRIX_COL_PINS { B6, B2, B3, B1, F7, F6, F5, F4 }
-
/*
* Feature disable options
* These options are also useful to firmware size reduction.
diff --git a/keyboards/handwired/xealous/rev1/info.json b/keyboards/handwired/xealous/rev1/info.json
index c470e72a16..bc310cad07 100644
--- a/keyboards/handwired/xealous/rev1/info.json
+++ b/keyboards/handwired/xealous/rev1/info.json
@@ -8,6 +8,11 @@
"pid": "0x5141",
"device_version": "0.0.1"
},
+ "matrix_pins": {
+ "cols": ["B6", "B2", "B3", "B1", "F7", "F6", "F5", "F4"],
+ "rows": ["B5", "B4", "E6", "D7", "D4"]
+ },
+ "diode_direction": "COL2ROW",
"processor": "atmega32u4",
"bootloader": "caterina",
"layouts": {
diff --git a/keyboards/handwired/z150/config.h b/keyboards/handwired/z150/config.h
index 8fc91281ca..7a054266ea 100644
--- a/keyboards/handwired/z150/config.h
+++ b/keyboards/handwired/z150/config.h
@@ -17,17 +17,10 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
#pragma once
-
-#define MATRIX_ROW_PINS { B13, B14, B15, A8, A9, A3, A10, A1, A2, A15, A0 }
-#define MATRIX_COL_PINS { B11, B10, B1, B0, A7, A6, A5, A4 }
-
#define NUM_LOCK_LED_PIN B5
#define SCROLL_LOCK_LED_PIN B4
#define CAPS_LOCK_LED_PIN B3
-/* COL2ROW, ROW2COL */
-#define DIODE_DIRECTION COL2ROW
-
/*
* Feature disable options
* These options are also useful to firmware size reduction.
diff --git a/keyboards/handwired/z150/info.json b/keyboards/handwired/z150/info.json
index 72796b314e..6b93b73e20 100644
--- a/keyboards/handwired/z150/info.json
+++ b/keyboards/handwired/z150/info.json
@@ -8,6 +8,11 @@
"pid": "0x0000",
"device_version": "0.0.1"
},
+ "matrix_pins": {
+ "cols": ["B11", "B10", "B1", "B0", "A7", "A6", "A5", "A4"],
+ "rows": ["B13", "B14", "B15", "A8", "A9", "A3", "A10", "A1", "A2", "A15", "A0"]
+ },
+ "diode_direction": "COL2ROW",
"processor": "STM32F103",
"bootloader": "stm32duino",
"layouts": {
diff --git a/keyboards/handwired/zergo/config.h b/keyboards/handwired/zergo/config.h
deleted file mode 100644
index 63666aa09f..0000000000
--- a/keyboards/handwired/zergo/config.h
+++ /dev/null
@@ -1,26 +0,0 @@
-/*
-Copyright 2020 E.Zelianin
-
-This program is free software: you can redistribute it and/or modify
-it under the terms of the GNU General Public License as published by
-the Free Software Foundation, either version 2 of the License, or
-(at your option) any later version.
-
-This program is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-GNU General Public License for more details.
-
-You should have received a copy of the GNU General Public License
-along with this program. If not, see <http://www.gnu.org/licenses/>.
-*/
-
-#pragma once
-
-
-/* key matrix pins */
-#define MATRIX_ROW_PINS { B1, D7, C3, D6, D5, D4 }
-#define MATRIX_COL_PINS { C7, C6, C5, C4, C2, C1, B7, D3, D2, B6, B5, B4, B3, B2 }
-
-/* COL2ROW or ROW2COL */
-#define DIODE_DIRECTION COL2ROW
diff --git a/keyboards/handwired/zergo/info.json b/keyboards/handwired/zergo/info.json
index 7b9776134c..6a472c3302 100644
--- a/keyboards/handwired/zergo/info.json
+++ b/keyboards/handwired/zergo/info.json
@@ -8,6 +8,11 @@
"pid": "0xB92B",
"device_version": "0.0.1"
},
+ "matrix_pins": {
+ "cols": ["C7", "C6", "C5", "C4", "C2", "C1", "B7", "D3", "D2", "B6", "B5", "B4", "B3", "B2"],
+ "rows": ["B1", "D7", "C3", "D6", "D5", "D4"]
+ },
+ "diode_direction": "COL2ROW",
"processor": "at90usb1286",
"bootloader": "halfkay",
"layouts": {