diff options
33 files changed, 236 insertions, 2539 deletions
diff --git a/keyboards/claw44/claw44.c b/keyboards/claw44/claw44.c index f564fb623b..d87103065c 100644 --- a/keyboards/claw44/claw44.c +++ b/keyboards/claw44/claw44.c @@ -1,10 +1 @@ #include "claw44.h" -#include "ssd1306.h" - -bool process_record_kb(uint16_t keycode, keyrecord_t *record) { -#ifdef SSD1306OLED - return process_record_gfx(keycode,record) && process_record_user(keycode, record); -#else - return process_record_user(keycode, record); -#endif -} diff --git a/keyboards/claw44/config.h b/keyboards/claw44/config.h index fb1cdf3962..0bd74ff833 100644 --- a/keyboards/claw44/config.h +++ b/keyboards/claw44/config.h @@ -19,10 +19,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #pragma once #include "config_common.h" -#include <serial_config.h> - -#define USE_I2C -#define USE_SERIAL #define NO_ACTION_MACRO #define NO_ACTION_FUNCTION diff --git a/keyboards/claw44/i2c.c b/keyboards/claw44/i2c.c deleted file mode 100644 index 4bee5c6398..0000000000 --- a/keyboards/claw44/i2c.c +++ /dev/null @@ -1,162 +0,0 @@ -#include <util/twi.h> -#include <avr/io.h> -#include <stdlib.h> -#include <avr/interrupt.h> -#include <util/twi.h> -#include <stdbool.h> -#include "i2c.h" - -#ifdef USE_I2C - -// Limits the amount of we wait for any one i2c transaction. -// Since were running SCL line 100kHz (=> 10μs/bit), and each transactions is -// 9 bits, a single transaction will take around 90μs to complete. -// -// (F_CPU/SCL_CLOCK) => # of μC cycles to transfer a bit -// poll loop takes at least 8 clock cycles to execute -#define I2C_LOOP_TIMEOUT (9+1)*(F_CPU/SCL_CLOCK)/8 - -#define BUFFER_POS_INC() (slave_buffer_pos = (slave_buffer_pos+1)%SLAVE_BUFFER_SIZE) - -volatile uint8_t i2c_slave_buffer[SLAVE_BUFFER_SIZE]; - -static volatile uint8_t slave_buffer_pos; -static volatile bool slave_has_register_set = false; - -// Wait for an i2c operation to finish -inline static -void i2c_delay(void) { - uint16_t lim = 0; - while(!(TWCR & (1<<TWINT)) && lim < I2C_LOOP_TIMEOUT) - lim++; - - // easier way, but will wait slightly longer - // _delay_us(100); -} - -// Setup twi to run at 100kHz or 400kHz (see ./i2c.h SCL_CLOCK) -void i2c_master_init(void) { - // no prescaler - TWSR = 0; - // Set TWI clock frequency to SCL_CLOCK. Need TWBR>10. - // Check datasheets for more info. - TWBR = ((F_CPU/SCL_CLOCK)-16)/2; -} - -// Start a transaction with the given i2c slave address. The direction of the -// transfer is set with I2C_READ and I2C_WRITE. -// returns: 0 => success -// 1 => error -uint8_t i2c_master_start(uint8_t address) { - TWCR = (1<<TWINT) | (1<<TWEN) | (1<<TWSTA); - - i2c_delay(); - - // check that we started successfully - if ( (TW_STATUS != TW_START) && (TW_STATUS != TW_REP_START)) - return 1; - - TWDR = address; - TWCR = (1<<TWINT) | (1<<TWEN); - - i2c_delay(); - - if ( (TW_STATUS != TW_MT_SLA_ACK) && (TW_STATUS != TW_MR_SLA_ACK) ) - return 1; // slave did not acknowledge - else - return 0; // success -} - - -// Finish the i2c transaction. -void i2c_master_stop(void) { - TWCR = (1<<TWINT) | (1<<TWEN) | (1<<TWSTO); - - uint16_t lim = 0; - while(!(TWCR & (1<<TWSTO)) && lim < I2C_LOOP_TIMEOUT) - lim++; -} - -// Write one byte to the i2c slave. -// returns 0 => slave ACK -// 1 => slave NACK -uint8_t i2c_master_write(uint8_t data) { - TWDR = data; - TWCR = (1<<TWINT) | (1<<TWEN); - - i2c_delay(); - - // check if the slave acknowledged us - return (TW_STATUS == TW_MT_DATA_ACK) ? 0 : 1; -} - -// Read one byte from the i2c slave. If ack=1 the slave is acknowledged, -// if ack=0 the acknowledge bit is not set. -// returns: byte read from i2c device -uint8_t i2c_master_read(int ack) { - TWCR = (1<<TWINT) | (1<<TWEN) | (ack<<TWEA); - - i2c_delay(); - return TWDR; -} - -void i2c_reset_state(void) { - TWCR = 0; -} - -void i2c_slave_init(uint8_t address) { - TWAR = address << 0; // slave i2c address - // TWEN - twi enable - // TWEA - enable address acknowledgement - // TWINT - twi interrupt flag - // TWIE - enable the twi interrupt - TWCR = (1<<TWIE) | (1<<TWEA) | (1<<TWINT) | (1<<TWEN); -} - -ISR(TWI_vect); - -ISR(TWI_vect) { - uint8_t ack = 1; - switch(TW_STATUS) { - case TW_SR_SLA_ACK: - // this device has been addressed as a slave receiver - slave_has_register_set = false; - break; - - case TW_SR_DATA_ACK: - // this device has received data as a slave receiver - // The first byte that we receive in this transaction sets the location - // of the read/write location of the slaves memory that it exposes over - // i2c. After that, bytes will be written at slave_buffer_pos, incrementing - // slave_buffer_pos after each write. - if(!slave_has_register_set) { - slave_buffer_pos = TWDR; - // don't acknowledge the master if this memory loctaion is out of bounds - if ( slave_buffer_pos >= SLAVE_BUFFER_SIZE ) { - ack = 0; - slave_buffer_pos = 0; - } - slave_has_register_set = true; - } else { - i2c_slave_buffer[slave_buffer_pos] = TWDR; - BUFFER_POS_INC(); - } - break; - - case TW_ST_SLA_ACK: - case TW_ST_DATA_ACK: - // master has addressed this device as a slave transmitter and is - // requesting data. - TWDR = i2c_slave_buffer[slave_buffer_pos]; - BUFFER_POS_INC(); - break; - - case TW_BUS_ERROR: // something went wrong, reset twi state - TWCR = 0; - default: - break; - } - // Reset everything, so we are ready for the next TWI interrupt - TWCR |= (1<<TWIE) | (1<<TWINT) | (ack<<TWEA) | (1<<TWEN); -} -#endif diff --git a/keyboards/claw44/i2c.h b/keyboards/claw44/i2c.h deleted file mode 100644 index 710662c7ab..0000000000 --- a/keyboards/claw44/i2c.h +++ /dev/null @@ -1,46 +0,0 @@ -#pragma once - -#include <stdint.h> - -#ifndef F_CPU -#define F_CPU 16000000UL -#endif - -#define I2C_READ 1 -#define I2C_WRITE 0 - -#define I2C_ACK 1 -#define I2C_NACK 0 - -#define SLAVE_BUFFER_SIZE 0x10 - -// i2c SCL clock frequency 400kHz -#define SCL_CLOCK 400000L - -extern volatile uint8_t i2c_slave_buffer[SLAVE_BUFFER_SIZE]; - -void i2c_master_init(void); -uint8_t i2c_master_start(uint8_t address); -void i2c_master_stop(void); -uint8_t i2c_master_write(uint8_t data); -uint8_t i2c_master_read(int); -void i2c_reset_state(void); -void i2c_slave_init(uint8_t address); - - -static inline unsigned char i2c_start_read(unsigned char addr) { - return i2c_master_start((addr << 1) | I2C_READ); -} - -static inline unsigned char i2c_start_write(unsigned char addr) { - return i2c_master_start((addr << 1) | I2C_WRITE); -} - -// from SSD1306 scrips -extern unsigned char i2c_rep_start(unsigned char addr); -extern void i2c_start_wait(unsigned char addr); -extern unsigned char i2c_readAck(void); -extern unsigned char i2c_readNak(void); -extern unsigned char i2c_read(unsigned char ack); - -#define i2c_read(ack) (ack) ? i2c_readAck() : i2c_readNak(); diff --git a/keyboards/claw44/keymaps/default/config.h b/keyboards/claw44/keymaps/default/config.h index eff6ad3c7b..d2ea02545b 100644 --- a/keyboards/claw44/keymaps/default/config.h +++ b/keyboards/claw44/keymaps/default/config.h @@ -20,16 +20,4 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #pragma once -//#define USE_MATRIX_I2C - -/* Select hand configuration */ - #define MASTER_LEFT -// #define MASTER_RIGHT -// #define EE_HANDS - -#define SSD1306OLED - -#define USE_SERIAL_PD2 - -#define TAPPING_TERM 200 diff --git a/keyboards/claw44/keymaps/default/keymap.c b/keyboards/claw44/keymaps/default/keymap.c index 088087c773..65dbd67d98 100644 --- a/keyboards/claw44/keymaps/default/keymap.c +++ b/keyboards/claw44/keymaps/default/keymap.c @@ -1,168 +1,59 @@ #include QMK_KEYBOARD_H -#ifdef PROTOCOL_LUFA - #include "lufa.h" - #include "split_util.h" -#endif -#ifdef SSD1306OLED - #include "ssd1306.h" -#endif - - -extern uint8_t is_master; // Each layer gets a name for readability, which is then used in the keymap matrix below. // The underscores don't mean anything - you can have a layer called STUFF or any other name. // Layer names don't all need to be of the same length, obviously, and you can also skip them // entirely and just use numbers. -enum custom_keycodes { - QWERTY = SAFE_RANGE, - LOWER, - RAISE -}; - -enum macro_keycodes { - KC_SAMPLEMACRO, +enum layer_number { + _QWERTY = 0, + _RAISE, + _LOWER, }; #define KC_ KC_TRNS #define KC_RST RESET -#define KC_L_SPC LT(_LOWER, KC_SPC) // lower -#define KC_R_ENT LT(_RAISE, KC_ENT) // raise -#define KC_G_JA LGUI_T(KC_LANG1) // cmd or win -#define KC_G_EN LGUI_T(KC_LANG2) // cmd or win -#define KC_C_BS LCTL_T(KC_BSPC) // ctrl -#define KC_A_DEL ALT_T(KC_DEL) // alt +#define KC_L_SPC LT(_LOWER, KC_SPC) // lower +#define KC_R_ENT LT(_RAISE, KC_ENT) // raise +#define KC_G_JA LGUI_T(KC_LANG1) // cmd or win +#define KC_G_EN LGUI_T(KC_LANG2) // cmd or win +#define KC_C_BS LCTL_T(KC_BSPC) // ctrl +#define KC_A_DEL ALT_T(KC_DEL) // alt const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { - - [_QWERTY] = LAYOUT( \ - //,--------+--------+---------+--------+---------+--------. ,--------+---------+--------+---------+--------+--------. - KC_ESC , KC_Q , KC_W , KC_E , KC_R , KC_T , KC_Y , KC_U , KC_I , KC_O , KC_P , KC_MINS, - //|--------+--------+---------+--------+---------+--------| |--------+---------+--------+---------+--------+--------| - KC_TAB , KC_A , KC_S , KC_D , KC_F , KC_G , KC_H , KC_J , KC_K , KC_L , KC_SCLN, KC_QUOT, - //|--------+--------+---------+--------+---------+--------| |--------+---------+--------+---------+--------+--------| - KC_LSFT, KC_Z , KC_X , KC_C , KC_V , KC_B , KC_N , KC_M , KC_COMM, KC_DOT , KC_SLSH, KC_RSFT, - //`--------+--------+---------+--------+---------+--------/ \--------+---------+--------+---------+--------+--------' - KC_A_DEL, KC_G_EN, KC_L_SPC, KC_C_BS, KC_C_BS, KC_R_ENT, KC_G_JA, KC_A_DEL - // `----------+--------+---------+--------' `--------+---------+--------+---------' - ), - - // \ ^ ! & | @ = + * % - - // ( # $ " ' ~ ← ↓ ↑ → ` ) - // { [ ] } - - [_RAISE] = LAYOUT( \ - //,--------+--------+--------+--------+--------+--------. ,--------+--------+--------+--------+--------+--------. - _______, KC_BSLS, KC_CIRC, KC_EXLM, KC_AMPR, KC_PIPE, KC_AT , KC_EQL , KC_PLUS, KC_ASTR, KC_PERC, KC_MINS, - //|--------+--------+--------+--------+--------+--------| |--------+--------+--------+--------+--------+--------| - KC_LPRN, KC_HASH, KC_DLR , KC_DQT , KC_QUOT, KC_TILD, KC_LEFT, KC_DOWN, KC_UP , KC_RGHT, KC_GRV , KC_RPRN, - //|--------+--------+--------+--------+--------+--------| |--------+--------+--------+--------+--------+--------| - _______, _______, _______, _______, KC_LCBR, KC_LBRC, KC_RBRC, KC_RCBR, _______, _______, _______, _______, - //`--------+--------+--------+--------+--------+--------/ \--------+--------+--------+--------+--------+--------' - _______, _______, _______, _______, _______, _______, _______, RESET - // `--------+--------+--------+--------' `--------+--------+--------+--------' - ), - - [_LOWER] = LAYOUT( \ - //,--------+--------+--------+--------+--------+--------. ,--------+--------+--------+--------+--------+--------. - KC_F1 , KC_F2 , KC_F3 , KC_F4 , KC_F5 , KC_F6 , _______, KC_EQL , KC_PLUS, KC_ASTR, KC_PERC, KC_MINS, - //|--------+--------+--------+--------+--------+--------| |--------+--------+--------+--------+--------+--------| - _______, KC_1 , KC_2 , KC_3 , KC_4 , KC_5 , KC_6 , KC_7 , KC_8 , KC_9 , KC_0 , _______, - //|--------+--------+--------+--------+--------+--------| |--------+--------+--------+--------+--------+--------| - KC_F7 , KC_F8 , KC_F9 , KC_F10 , KC_F11 , KC_F12 , _______, _______, KC_COMM, KC_DOT , KC_SLSH, _______, - //`--------+--------+--------+--------+--------+--------/ \--------+--------+--------+--------+--------+--------' - RESET , _______, _______, _______, _______, _______, _______, _______ - // `--------+--------+--------+--------' `--------+--------+--------+--------' - ), + [_QWERTY] = LAYOUT( \ + //,--------+--------+---------+--------+---------+--------. ,--------+---------+--------+---------+--------+--------. + KC_ESC , KC_Q , KC_W , KC_E , KC_R , KC_T , KC_Y , KC_U , KC_I , KC_O , KC_P , KC_MINS, + //|--------+--------+---------+--------+---------+--------| |--------+---------+--------+---------+--------+--------| + KC_TAB , KC_A , KC_S , KC_D , KC_F , KC_G , KC_H , KC_J , KC_K , KC_L , KC_SCLN, KC_QUOT, + //|--------+--------+---------+--------+---------+--------| |--------+---------+--------+---------+--------+--------| + KC_LSFT, KC_Z , KC_X , KC_C , KC_V , KC_B , KC_N , KC_M , KC_COMM, KC_DOT , KC_SLSH, KC_RSFT, + //`--------+--------+---------+--------+---------+--------/ \--------+---------+--------+---------+--------+--------' + KC_A_DEL, KC_G_EN, KC_L_SPC, KC_C_BS, KC_C_BS, KC_R_ENT, KC_G_JA, KC_A_DEL + // `----------+--------+---------+--------' `--------+---------+--------+---------' + ), + + [_RAISE] = LAYOUT( \ + //,--------+--------+--------+--------+--------+--------. ,--------+--------+--------+--------+--------+--------. + _______, KC_BSLS, KC_CIRC, KC_EXLM, KC_AMPR, KC_PIPE, KC_AT , KC_EQL , KC_PLUS, KC_ASTR, KC_PERC, KC_MINS, + //|--------+--------+--------+--------+--------+--------| |--------+--------+--------+--------+--------+--------| + KC_LPRN, KC_HASH, KC_DLR , KC_DQT , KC_QUOT, KC_TILD, KC_LEFT, KC_DOWN, KC_UP , KC_RGHT, KC_GRV , KC_RPRN, + //|--------+--------+--------+--------+--------+--------| |--------+--------+--------+--------+--------+--------| + _______, _______, _______, _______, KC_LCBR, KC_LBRC, KC_RBRC, KC_RCBR, _______, _______, _______, _______, + //`--------+--------+--------+--------+--------+--------/ \--------+--------+--------+--------+--------+--------' + _______, _______, _______, _______, _______, _______, _______, RESET + // `--------+--------+--------+--------' `--------+--------+--------+--------' + ), + + [_LOWER] = LAYOUT( \ + //,--------+--------+--------+--------+--------+--------. ,--------+--------+--------+--------+--------+--------. + KC_F1 , KC_F2 , KC_F3 , KC_F4 , KC_F5 , KC_F6 , _______, KC_EQL , KC_PLUS, KC_ASTR, KC_PERC, KC_MINS, + //|--------+--------+--------+--------+--------+--------| |--------+--------+--------+--------+--------+--------| + _______, KC_1 , KC_2 , KC_3 , KC_4 , KC_5 , KC_6 , KC_7 , KC_8 , KC_9 , KC_0 , _______, + //|--------+--------+--------+--------+--------+--------| |--------+--------+--------+--------+--------+--------| + KC_F7 , KC_F8 , KC_F9 , KC_F10 , KC_F11 , KC_F12 , _______, _______, KC_COMM, KC_DOT , KC_SLSH, _______, + //`--------+--------+--------+--------+--------+--------/ \--------+--------+--------+--------+--------+--------' + RESET , _______, _______, _______, _______, _______, _______, _______ + // `--------+--------+--------+--------' `--------+--------+--------+--------' + ), }; - -void matrix_init_user(void) { - //SSD1306 OLED init, make sure to add #define SSD1306OLED in config.h - #ifdef SSD1306OLED - iota_gfx_init(!has_usb()); // turns on the display - #endif -} - -//SSD1306 OLED update loop, make sure to add #define SSD1306OLED in config.h -#ifdef SSD1306OLED - -// When add source files to SRC in rules.mk, you can use functions. -const char *read_layer_state(void); -const char *read_logo(void); -void set_keylog(uint16_t keycode, keyrecord_t *record); -const char *read_keylog(void); -const char *read_keylogs(void); - -// const char *read_mode_icon(bool swap); -// const char *read_host_led_state(void); -// void set_timelog(void); -// const char *read_timelog(void); - -void matrix_scan_user(void) { - iota_gfx_task(); -} - -void matrix_render_user(struct CharacterMatrix *matrix) { - if (is_master) { - // If you want to change the display of OLED, you need to change here - matrix_write_ln(matrix, read_layer_state()); - matrix_write_ln(matrix, read_keylog()); - matrix_write_ln(matrix, read_keylogs()); - //matrix_write_ln(matrix, read_mode_icon(keymap_config.swap_lalt_lgui)); - //matrix_write_ln(matrix, read_host_led_state()); - //matrix_write_ln(matrix, read_timelog()); - } else { - matrix_write(matrix, read_logo()); - } -} - -void matrix_update(struct CharacterMatrix *dest, const struct CharacterMatrix *source) { - if (memcmp(dest->display, source->display, sizeof(dest->display))) { - memcpy(dest->display, source->display, sizeof(dest->display)); - dest->dirty = true; - } -} - -void iota_gfx_task_user(void) { - struct CharacterMatrix matrix; - matrix_clear(&matrix); - matrix_render_user(&matrix); - matrix_update(&display, &matrix); -} -#endif//SSD1306OLED - -bool process_record_user(uint16_t keycode, keyrecord_t *record) { - if (record->event.pressed) { -#ifdef SSD1306OLED - set_keylog(keycode, record); -#endif - // set_timelog(); - } - - switch (keycode) { - case QWERTY: - if (record->event.pressed) { - set_single_persistent_default_layer(_QWERTY); - } - return false; - break; - case LOWER: - if (record->event.pressed) { - layer_on(_LOWER); - } else { - layer_off(_LOWER); - } - return false; - break; - case RAISE: - if (record->event.pressed) { - layer_on(_RAISE); - } else { - layer_off(_RAISE); - } - return false; - break; - } - return true; -} diff --git a/keyboards/claw44/keymaps/yfuku/config.h b/keyboards/claw44/keymaps/oled/config.h index 244ffa7096..edde2c67ca 100644 --- a/keyboards/claw44/keymaps/yfuku/config.h +++ b/keyboards/claw44/keymaps/oled/config.h @@ -20,17 +20,5 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #pragma once -//#define USE_MATRIX_I2C - -/* Select hand configuration */ - #define MASTER_LEFT -// #define MASTER_RIGHT -// #define EE_HANDS - -#define SSD1306OLED - -#define USE_SERIAL_PD2 - -#define TAPPING_TERM 180 -#define IGNORE_MOD_TAP_INTERRUPT +#define OLED_FONT_H "keyboards/claw44/lib/glcdfont.c" diff --git a/keyboards/claw44/keymaps/oled/keymap.c b/keyboards/claw44/keymaps/oled/keymap.c new file mode 100644 index 0000000000..0d10c371a2 --- /dev/null +++ b/keyboards/claw44/keymaps/oled/keymap.c @@ -0,0 +1,137 @@ +#include QMK_KEYBOARD_H +#include <stdio.h> + +// Each layer gets a name for readability, which is then used in the keymap matrix below. +// The underscores don't mean anything - you can have a layer called STUFF or any other name. +// Layer names don't all need to be of the same length, obviously, and you can also skip them +// entirely and just use numbers. + +enum layer_number { + _QWERTY = 0, + _RAISE, + _LOWER, +}; + +#define KC_ KC_TRNS +#define KC_RST RESET +#define KC_L_SPC LT(_LOWER, KC_SPC) // lower +#define KC_R_ENT LT(_RAISE, KC_ENT) // raise +#define KC_G_JA LGUI_T(KC_LANG1) // cmd or win +#define KC_G_EN LGUI_T(KC_LANG2) // cmd or win +#define KC_C_BS LCTL_T(KC_BSPC) // ctrl +#define KC_A_DEL ALT_T(KC_DEL) // alt + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + [_QWERTY] = LAYOUT( \ + //,--------+--------+---------+--------+---------+--------. ,--------+---------+--------+---------+--------+--------. + KC_ESC , KC_Q , KC_W , KC_E , KC_R , KC_T , KC_Y , KC_U , KC_I , KC_O , KC_P , KC_MINS, + //|--------+--------+---------+--------+---------+--------| |--------+---------+--------+---------+--------+--------| + KC_TAB , KC_A , KC_S , KC_D , KC_F , KC_G , KC_H , KC_J , KC_K , KC_L , KC_SCLN, KC_QUOT, + //|--------+--------+---------+--------+---------+--------| |--------+---------+--------+---------+--------+--------| + KC_LSFT, KC_Z , KC_X , KC_C , KC_V , KC_B , KC_N , KC_M , KC_COMM, KC_DOT , KC_SLSH, KC_RSFT, + //`--------+--------+---------+--------+---------+--------/ \--------+---------+--------+---------+--------+--------' + KC_A_DEL, KC_G_EN, KC_L_SPC, KC_C_BS, KC_C_BS, KC_R_ENT, KC_G_JA, KC_A_DEL + // `----------+--------+---------+--------' `--------+---------+--------+---------' + ), + + [_RAISE] = LAYOUT( \ + //,--------+--------+--------+--------+--------+--------. ,--------+--------+--------+--------+--------+--------. + _______, KC_BSLS, KC_CIRC, KC_EXLM, KC_AMPR, KC_PIPE, KC_AT , KC_EQL , KC_PLUS, KC_ASTR, KC_PERC, KC_MINS, + //|--------+--------+--------+--------+--------+--------| |--------+--------+--------+--------+--------+--------| + KC_LPRN, KC_HASH, KC_DLR , KC_DQT , KC_QUOT, KC_TILD, KC_LEFT, KC_DOWN, KC_UP , KC_RGHT, KC_GRV , KC_RPRN, + //|--------+--------+--------+--------+--------+--------| |--------+--------+--------+--------+--------+--------| + _______, _______, _______, _______, KC_LCBR, KC_LBRC, KC_RBRC, KC_RCBR, _______, _______, _______, _______, + //`--------+--------+--------+--------+--------+--------/ \--------+--------+--------+--------+--------+--------' + _______, _______, _______, _______, _______, _______, _______, RESET + // `--------+--------+--------+--------' `--------+--------+--------+--------' + ), + + [_LOWER] = LAYOUT( \ + //,--------+--------+--------+--------+--------+--------. ,--------+--------+--------+--------+--------+--------. + KC_F1 , KC_F2 , KC_F3 , KC_F4 , KC_F5 , KC_F6 , _______, KC_EQL , KC_PLUS, KC_ASTR, KC_PERC, KC_MINS, + //|--------+--------+--------+--------+--------+--------| |--------+--------+--------+--------+--------+--------| + _______, KC_1 , KC_2 , KC_3 , KC_4 , KC_5 , KC_6 , KC_7 , KC_8 , KC_9 , KC_0 , _______, + //|--------+--------+--------+--------+--------+--------| |--------+--------+--------+--------+--------+--------| + KC_F7 , KC_F8 , KC_F9 , KC_F10 , KC_F11 , KC_F12 , _______, _______, KC_COMM, KC_DOT , KC_SLSH, _______, + //`--------+--------+--------+--------+--------+--------/ \--------+--------+--------+--------+--------+--------' + RESET , _______, _______, _______, _______, _______, _______, _______ + // `--------+--------+--------+--------' `--------+--------+--------+--------' + ), +}; + +#ifdef OLED_DRIVER_ENABLE + +void render_layer_state(void) { + switch (get_highest_layer(layer_state)) { + case _QWERTY: + oled_write_ln_P(PSTR("Layer: Default"), false); + break; + case _RAISE: + oled_write_ln_P(PSTR("Layer: Raise"), false); + break; + case _LOWER: + oled_write_ln_P(PSTR("Layer: Lower"), false); + break; + default: + oled_write_ln_P(PSTR("Layer: Undefined"), false); + } +} + +void render_logo(void) { + static const char PROGMEM logo[] = {0x80, 0x81, 0x82, 0x83, 0x84, 0x85, 0x86, 0x87, 0x88, 0x89, 0x8a, 0x8b, 0x8c, 0x8d, 0x8e, 0x8f, 0x90, 0x91, 0x92, 0x93, 0x94, 0xa0, 0xa1, 0xa2, 0xa3, 0xa4, 0xa5, 0xa6, 0xa7, 0xa8, 0xa9, 0xaa, 0xab, 0xac, 0xad, 0xae, 0xaf, 0xb0, 0xb1, 0xb2, 0xb3, 0xb4, 0xc0, 0xc1, 0xc2, 0xc3, 0xc4, 0xc5, 0xc6, 0xc7, 0xc8, 0xc9, 0xca, 0xcb, 0xcc, 0xcd, 0xce, 0xcf, 0xd0, 0xd1, 0xd2, 0xd3, 0xd4, 0}; + oled_write_P(logo, false); +} + +char keylog_str[24] = {}; +char keylogs_str[21] = {}; +int keylogs_str_idx = 0; + +const char code_to_name[60] = {' ', ' ', ' ', ' ', 'a', 'b', 'c', 'd', 'e', 'f', 'g', 'h', 'i', 'j', 'k', 'l', 'm', 'n', 'o', 'p', 'q', 'r', 's', 't', 'u', 'v', 'w', 'x', 'y', 'z', '1', '2', '3', '4', '5', '6', '7', '8', '9', '0', 'R', 'E', 'B', 'T', ' ', ' ', ' ', ' ', ' ', ' ', ' ', ';', '\'', ' ', ',', '.', '/', ' ', ' ', ' '}; + +void set_keylog(uint16_t keycode, keyrecord_t *record) { + char name = ' '; + if (keycode < 60) { + name = code_to_name[keycode]; + } + + // update keylog + snprintf(keylog_str, sizeof(keylog_str), "%dx%d, k%2d : %c", record->event.key.row, record->event.key.col, keycode, name); + + // update keylogs + if (keylogs_str_idx == sizeof(keylogs_str) - 1) { + keylogs_str_idx = 0; + for (int i = 0; i < sizeof(keylogs_str) - 1; i++) { + keylogs_str[i] = ' '; + } + } + + keylogs_str[keylogs_str_idx] = name; + keylogs_str_idx++; +} + +const char *read_keylog(void) { return keylog_str; } +const char *read_keylogs(void) { return keylogs_str; } + +void oled_task_user(void) { + if (is_keyboard_master()) { + render_layer_state(); + oled_write_ln(read_keylog(), false); + oled_write_ln(read_keylogs(), false); + } else { + render_logo(); + } +} + +bool process_record_user(uint16_t keycode, keyrecord_t *record) { + if (record->event.pressed) { + set_keylog(keycode, record); + } + return true; +} + +oled_rotation_t oled_init_user(oled_rotation_t rotation) { + if (!is_keyboard_master()) return OLED_ROTATION_180; + return rotation; +} + +#endif diff --git a/keyboards/claw44/keymaps/oled/rules.mk b/keyboards/claw44/keymaps/oled/rules.mk new file mode 100644 index 0000000000..c582662134 --- /dev/null +++ b/keyboards/claw44/keymaps/oled/rules.mk @@ -0,0 +1 @@ +OLED_DRIVER_ENABLE = yes diff --git a/keyboards/claw44/keymaps/yfuku/keymap.c b/keyboards/claw44/keymaps/yfuku/keymap.c deleted file mode 100644 index 77d459b928..0000000000 --- a/keyboards/claw44/keymaps/yfuku/keymap.c +++ /dev/null @@ -1,221 +0,0 @@ -#include QMK_KEYBOARD_H -#ifdef PROTOCOL_LUFA - #include "lufa.h" - #include "split_util.h" -#endif -#ifdef SSD1306OLED - #include "ssd1306.h" -#endif - -extern keymap_config_t keymap_config; - -extern uint8_t is_master; - -// Each layer gets a name for readability, which is then used in the keymap matrix below. -// The underscores don't mean anything - you can have a layer called STUFF or any other name. -// Layer names don't all need to be of the same length, obviously, and you can also skip them -// entirely and just use numbers. -enum custom_keycodes { - QWERTY = SAFE_RANGE, - LOWER, - RAISE -}; - -enum macro_keycodes { - KC_SAMPLEMACRO, -}; - -// common -#define KC_ KC_TRNS -#define KC_XXXX KC_NO -#define KC_RST RESET -#define KC_VD KC__VOLDOWN -#define KC_VU KC__VOLUP - -// layer -#define KC_L_SPC LT(_LOWER, KC_SPC) -#define KC_R_ENT LT(_RAISE, KC_ENT) - -// shift_t -#define KC_S_TAB LSFT_T(KC_TAB) -#define KC_S_ESC LSFT_T(KC_ESC) -#define KC_S_JA LSFT_T(KC_LANG1) -#define KC_S_EN LSFT_T(KC_LANG2) - -// cmd_t -#define KC_M_F LCMD_T(KC_F) -#define KC_M_D LCMD_T(KC_D) -#define KC_M_J LCMD_T(KC_J) -#define KC_M_K LCMD_T(KC_K) - -// ctl_t -#define KC_C_S LCTL_T(KC_S) -#define KC_C_L LCTL_T(KC_L) -#define KC_C_BS LCTL_T(KC_BSPC) - -// alt_t -#define KC_A_D ALT_T(KC_D) -#define KC_A_K ALT_T(KC_K) -#define KC_A_Z ALT_T(KC_Z) -#define KC_A_SL ALT_T(KC_SLSH) -#define KC_A_DEL ALT_T(KC_DEL) - -// cmd+shift_t -#define KC_MS_Q SCMD_T(KC_Q) -#define KC_MS_A SCMD_T(KC_A) -#define KC_MS_S SCMD_T(KC_S) -#define KC_MS_SC SCMD_T(KC_SCLN) -#define KC_MS_ESC SCMD_T(KC_ESC) - -// -#define KC_MR RCMD(KC_R) -#define KC_MF RCMD(KC_F) -#define KC_MW RCMD(KC_W) -#define KC_MX RCMD(KC_X) -#define KC_MC RCMD(KC_C) -#define KC_MV RCMD(KC_V) -#define KC_MTAB RCMD(KC_TAB) -#define KC_MSF RCMD(RSFT(KC_F)) -#define KC_MSR RCMD(RSFT(KC_R)) -#define KC_MST RCMD(RSFT(KC_T)) - -const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { - - // M_ = LCMD_T( - // A_ = ALT_T( - // C_ = LCTL_T( - // MS_ = SMD_T( - // R_ = LT(_RAISE - // L_ = LT(_LOWER - - [_QWERTY] = LAYOUT_kc( \ - //,----+----+----+----+----+----. ,----+----+----+----+----+----. - ESC , Q , W , E , R , T , Y , U , I , O , P ,MINS, - //|----+----+----+----+----+----| |----+----+----+----+----+----| - S_TAB, A ,C_S , D ,M_F , G , H ,M_J , K ,C_L ,SCLN,S_ESC, - //|----+----+----+----+----+----+ |----+----+----+----+----+----| - , Z , X , C , V , B , N , M ,COMM,DOT ,SLSH, , - //`----+----+----+----+----+----/ \----+----+----+----+----+----' - A_DEL,S_EN,L_SPC,C_BS, C_BS,R_ENT,S_JA,A_DEL - // `----+----+----+----' `----+----+----+----' - ), - - // \ ^ ! & | @ = + * % - - // ( # $ " ' ~ ← ↓ ↑ → ` ) - // { [ ] } - - [_RAISE] = LAYOUT_kc( \ - //,----+----+----+----+----+----. ,----+----+----+----+----+----. - ,BSLS,CIRC,EXLM,AMPR,PIPE, AT ,EQL ,PLUS,ASTR,PERC,MINS, - //|----+----+----+----+----+----| |----+----+----+----+----+----| - LPRN,HASH,DLR ,DQT ,QUOT,TILD, LEFT,DOWN, UP ,RGHT,GRV ,RPRN, - //|----+----+----+----+----+----| |----+----+----+----+----+----| - , , , ,LCBR,LBRC, RBRC,RCBR, , , , , - //`----+----+----+----+----+----/ \----+----+----+----+----+----' - , ,BSPC, , , , ,RST - // `----+----+----+----' `----+----+----+----' - ), - - [_LOWER] = LAYOUT_kc( \ - //,----+----+----+----+----+----. ,----+----+----+----+----+----. - , , ,MSF ,MSR ,MST , ,EQL ,PLUS,ASTR,PERC,MINS, - //|----+----+----+----+----+----| |----+----+----+----+----+----| - , 1 , 2 , 3 , 4 , 5 , 6 , 7 , 8 , 9 , 0 , , - //|----+----+----+----+----+----| |----+----+----+----+----+----| - , , , , , , , ,COMM,DOT ,SLSH, , - //`----+----+----+--+-+----+----/ \----+----+----+----+----+----' - RST , , , , ,DEL , , - // `----+----+----+----' `----+----+----+----' - ), -}; - -void matrix_init_user(void) { - //SSD1306 OLED init, make sure to add #define SSD1306OLED in config.h - #ifdef SSD1306OLED - iota_gfx_init(!has_usb()); // turns on the display - #endif -} - -//SSD1306 OLED update loop, make sure to add #define SSD1306OLED in config.h -#ifdef SSD1306OLED - -// When add source files to SRC in rules.mk, you can use functions. -const char *read_layer_state(void); -const char *read_logo(void); -void set_keylog(uint16_t keycode, keyrecord_t *record); -const char *read_keylog(void); -const char *read_keylogs(void); - -// const char *read_mode_icon(bool swap); -// const char *read_host_led_state(void); -// void set_timelog(void); -// const char *read_timelog(void); - -void matrix_scan_user(void) { - iota_gfx_task(); -} - -void matrix_render_user(struct CharacterMatrix *matrix) { - if (is_master) { - // If you want to change the display of OLED, you need to change here - matrix_write_ln(matrix, read_layer_state()); - matrix_write_ln(matrix, read_keylog()); - matrix_write_ln(matrix, read_keylogs()); - //matrix_write_ln(matrix, read_mode_icon(keymap_config.swap_lalt_lgui)); - //matrix_write_ln(matrix, read_host_led_state()); - //matrix_write_ln(matrix, read_timelog()); - } else { - matrix_write(matrix, read_logo()); - } -} - -void matrix_update(struct CharacterMatrix *dest, const struct CharacterMatrix *source) { - if (memcmp(dest->display, source->display, sizeof(dest->display))) { - memcpy(dest->display, source->display, sizeof(dest->display)); - dest->dirty = true; - } -} - -void iota_gfx_task_user(void) { - struct CharacterMatrix matrix; - matrix_clear(&matrix); - matrix_render_user(&matrix); - matrix_update(&display, &matrix); -} -#endif//SSD1306OLED - -bool process_record_user(uint16_t keycode, keyrecord_t *record) { - if (record->event.pressed) { -#ifdef SSD1306OLED - set_keylog(keycode, record); -#endif - // set_timelog(); - } - - switch (keycode) { - case QWERTY: - if (record->event.pressed) { - set_single_persistent_default_layer(_QWERTY); - } - return false; - break; - case LOWER: - if (record->event.pressed) { - layer_on(_LOWER); - } else { - layer_off(_LOWER); - } - return false; - break; - case RAISE: - if (record->event.pressed) { - layer_on(_RAISE); - } else { - layer_off(_RAISE); - } - return false; - break; - } - return true; -} - diff --git a/keyboards/claw44/lib/glcdfont.c b/keyboards/claw44/lib/glcdfont.c index 9fa1c806aa..91f53d9c24 100644 --- a/keyboards/claw44/lib/glcdfont.c +++ b/keyboards/claw44/lib/glcdfont.c @@ -1,7 +1,17 @@ // This is the 'classic' fixed-space bitmap font for Adafruit_GFX since 1.0. // See gfxfont.h for newer custom bitmap font info. -#include "progmem.h" +#ifndef FONT5X7_H +#define FONT5X7_H + +#ifdef __AVR__ + #include <avr/io.h> + #include <avr/pgmspace.h> +#elif defined(ESP8266) + #include <pgmspace.h> +#else + #define PROGMEM +#endif // Standard ASCII 5x7 font const unsigned char font[] PROGMEM = { @@ -230,3 +240,4 @@ const unsigned char font[] PROGMEM = { 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, }; +#endif // FONT5X7_H diff --git a/keyboards/claw44/lib/host_led_state_reader.c b/keyboards/claw44/lib/host_led_state_reader.c deleted file mode 100644 index 980823b318..0000000000 --- a/keyboards/claw44/lib/host_led_state_reader.c +++ /dev/null @@ -1,15 +0,0 @@ -#include <stdio.h> -#include "claw44.h" - -char host_led_state_str[24]; - -const char *read_host_led_state(void) -{ - uint8_t leds = host_keyboard_leds(); - snprintf(host_led_state_str, sizeof(host_led_state_str), "NL:%s CL:%s SL:%s", - (leds & (1 << USB_LED_NUM_LOCK)) ? "on" : "- ", - (leds & (1 << USB_LED_CAPS_LOCK)) ? "on" : "- ", - (leds & (1 << USB_LED_SCROLL_LOCK)) ? "on" : "- "); - - return host_led_state_str; -} diff --git a/keyboards/claw44/lib/keylogger.c b/keyboards/claw44/lib/keylogger.c deleted file mode 100644 index 092b6929bc..0000000000 --- a/keyboards/claw44/lib/keylogger.c +++ /dev/null @@ -1,45 +0,0 @@ -#include <stdio.h> -#include "claw44.h" - -char keylog_str[24] = {}; -char keylogs_str[21] = {}; -int keylogs_str_idx = 0; - -const char code_to_name[60] = { - ' ', ' ', ' ', ' ', 'a', 'b', 'c', 'd', 'e', 'f', - 'g', 'h', 'i', 'j', 'k', 'l', 'm', 'n', 'o', 'p', - 'q', 'r', 's', 't', 'u', 'v', 'w', 'x', 'y', 'z', - '1', '2', '3', '4', '5', '6', '7', '8', '9', '0', - 'R', 'E', 'B', 'T', ' ', ' ', ' ', ' ', ' ', ' ', - ' ', ';', '\'', ' ', ',', '.', '/', ' ', ' ', ' '}; - -void set_keylog(uint16_t keycode, keyrecord_t *record) { - char name = ' '; - if (keycode < 60) { - name = code_to_name[keycode]; - } - - // update keylog - snprintf(keylog_str, sizeof(keylog_str), "%dx%d, k%2d : %c", - record->event.key.row, record->event.key.col, - keycode, name); - - // update keylogs - if (keylogs_str_idx == sizeof(keylogs_str) - 1) { - keylogs_str_idx = 0; - for (int i = 0; i < sizeof(keylogs_str) - 1; i++) { - keylogs_str[i] = ' '; - } - } - - keylogs_str[keylogs_str_idx] = name; - keylogs_str_idx++; -} - -const char *read_keylog(void) { - return keylog_str; -} - -const char *read_keylogs(void) { - return keylogs_str; -} diff --git a/keyboards/claw44/lib/layer_state_reader.c b/keyboards/claw44/lib/layer_state_reader.c deleted file mode 100644 index d92b6df582..0000000000 --- a/keyboards/claw44/lib/layer_state_reader.c +++ /dev/null @@ -1,35 +0,0 @@ - -#include QMK_KEYBOARD_H -#include <stdio.h> -#include "claw44.h" - -#define L_BASE 0 -#define L_LOWER (1<<_LOWER) -#define L_RAISE (1<<_RAISE) -#define L_ADJUST (1<<_ADJUST) -#define L_ADJUST_TRI (L_ADJUST|L_RAISE|L_LOWER) - -char layer_state_str[24]; - -const char *read_layer_state(void) { - switch (layer_state) - { - case L_BASE: - snprintf(layer_state_str, sizeof(layer_state_str), "Layer: Default"); - break; - case L_RAISE: - snprintf(layer_state_str, sizeof(layer_state_str), "Layer: Raise"); - break; - case L_LOWER: - snprintf(layer_state_str, sizeof(layer_state_str), "Layer: Lower"); - break; - case L_ADJUST: - case L_ADJUST_TRI: - snprintf(layer_state_str, sizeof(layer_state_str), "Layer: Adjust"); - break; - default: - snprintf(layer_state_str, sizeof(layer_state_str), "Layer: Undef-%ld", layer_state); - } - - return layer_state_str; -} diff --git a/keyboards/claw44/lib/logo_reader.c b/keyboards/claw44/lib/logo_reader.c deleted file mode 100644 index b5b437b2b8..0000000000 --- a/keyboards/claw44/lib/logo_reader.c +++ /dev/null @@ -1,11 +0,0 @@ -#include "claw44.h" - -const char *read_logo(void) { - static char logo[] = { - 0x80, 0x81, 0x82, 0x83, 0x84, 0x85, 0x86, 0x87, 0x88, 0x89, 0x8a, 0x8b, 0x8c, 0x8d, 0x8e, 0x8f, 0x90, 0x91, 0x92, 0x93, 0x94, - 0xa0, 0xa1, 0xa2, 0xa3, 0xa4, 0xa5, 0xa6, 0xa7, 0xa8, 0xa9, 0xaa, 0xab, 0xac, 0xad, 0xae, 0xaf, 0xb0, 0xb1, 0xb2, 0xb3, 0xb4, - 0xc0, 0xc1, 0xc2, 0xc3, 0xc4, 0xc5, 0xc6, 0xc7, 0xc8, 0xc9, 0xca, 0xcb, 0xcc, 0xcd, 0xce, 0xcf, 0xd0, 0xd1, 0xd2, 0xd3, 0xd4, - 0}; - - return logo; -} diff --git a/keyboards/claw44/lib/mode_icon_reader.c b/keyboards/claw44/lib/mode_icon_reader.c deleted file mode 100644 index a9272bb9a7..0000000000 --- a/keyboards/claw44/lib/mode_icon_reader.c +++ /dev/null @@ -1,15 +0,0 @@ -#include <stdio.h> -#include "claw44.h" - -char mode_icon[24]; - -const char *read_mode_icon(bool swap) { - static char logo[][2][3] = {{{0x95, 0x96, 0}, {0xb5, 0xb6, 0}}, {{0x97, 0x98, 0}, {0xb7, 0xb8, 0}}}; - if (swap == false) { - snprintf(mode_icon, sizeof(mode_icon), "%s\n%s", logo[0][0], logo[0][1]); - } else { - snprintf(mode_icon, sizeof(mode_icon), "%s\n%s", logo[1][0], logo[1][1]); - } - - return mode_icon; -} diff --git a/keyboards/claw44/lib/rgb_state_reader.c b/keyboards/claw44/lib/rgb_state_reader.c deleted file mode 100644 index e0efe2e528..0000000000 --- a/keyboards/claw44/lib/rgb_state_reader.c +++ /dev/null @@ -1,15 +0,0 @@ -#ifdef RGBLIGHT_ENABLE - -#include QMK_KEYBOARD_H -#include <stdio.h> - -extern rgblight_config_t rgblight_config; -char rbf_info_str[24]; -const char *read_rgb_info(void) { - - snprintf(rbf_info_str, sizeof(rbf_info_str), "%s %2d h%3d s%3d v%3d", - rgblight_config.enable ? "on" : "- ", rgblight_config.mode, - rgblight_config.hue, rgblight_config.sat, rgblight_config.val); - return rbf_info_str; -} -#endif diff --git a/keyboards/claw44/lib/timelogger.c b/keyboards/claw44/lib/timelogger.c deleted file mode 100644 index ecd4ed3ea8..0000000000 --- a/keyboards/claw44/lib/timelogger.c +++ /dev/null @@ -1,16 +0,0 @@ -#include <stdio.h> -#include "claw44.h" - -char timelog_str[24] = {}; -int last_time = 0; -int elapsed_time = 0; - -void set_timelog(void) { - elapsed_time = timer_elapsed(last_time); - last_time = timer_read(); - snprintf(timelog_str, sizeof(timelog_str), "lt:%5d, et:%5d", last_time, elapsed_time); -} - -const char *read_timelog(void) { - return timelog_str; -} diff --git a/keyboards/claw44/rev1/config.h b/keyboards/claw44/rev1/config.h index f3406fee5c..dc6e49dd9a 100644 --- a/keyboards/claw44/rev1/config.h +++ b/keyboards/claw44/rev1/config.h @@ -19,22 +19,21 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #pragma once /* USB Device descriptor parameter */ -#define VENDOR_ID 0xFEED -#define PRODUCT_ID 0x3060 -#define DEVICE_VER 0x0001 -#define MANUFACTURER yfuku -#define PRODUCT claw44 -#define DESCRIPTION A split keyboard with 3x6 vertically staggered keys and 4 thumb keys +#define VENDOR_ID 0xFEED +#define PRODUCT_ID 0x3060 +#define DEVICE_VER 0x0001 +#define MANUFACTURER yfuku +#define PRODUCT claw44 +#define DESCRIPTION A split keyboard with 3x6 vertically staggered keys and 4 thumb keys /* key matrix size */ -// Rows are doubled-up #define MATRIX_ROWS 8 -#define MATRIX_COLS 7 +#define MATRIX_COLS 6 #define MATRIX_ROW_PINS { D4, C6, D7, E6 } - -// wiring of each half -#define MATRIX_COL_PINS { F4, F5, F6, F7, B1, B3, B2 } -// #define MATRIX_COL_PINS { B2, B3, B1, F7, F6, F5, F4 } //uncomment this line and comment line above if you need to reverse left-to-right key order +#define MATRIX_COL_PINS { F4, F5, F6, F7, B1, B3 } +#define UNUSED_PINS +#define DIODE_DIRECTION COL2ROW +#define SOFT_SERIAL_PIN D2 /* define if matrix has ghost */ //#define MATRIX_HAS_GHOST diff --git a/keyboards/claw44/rev1/matrix.c b/keyboards/claw44/rev1/matrix.c deleted file mode 100644 index a5896d9792..0000000000 --- a/keyboards/claw44/rev1/matrix.c +++ /dev/null @@ -1,358 +0,0 @@ -/* -Copyright 2012 Jun Wako <wakojun@gmail.com> - -This program is free software: you can redistribute it and/or modify -it under the terms of the GNU General Public License as published by -the Free Software Foundation, either version 2 of the License, or -(at your option) any later version. - -This program is distributed in the hope that it will be useful, -but WITHOUT ANY WARRANTY; without even the implied warranty of -MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -GNU General Public License for more details. - -You should have received a copy of the GNU General Public License -along with this program. If not, see <http://www.gnu.org/licenses/>. -*/ - -/* - * scan matrix - */ -#include <stdint.h> -#include <stdbool.h> -#include <string.h> -#include <avr/io.h> -#include <avr/wdt.h> -#include <avr/interrupt.h> -#include <util/delay.h> -#include "print.h" -#include "debug.h" -#include "util.h" -#include "matrix.h" -#include "split_util.h" -#include "quantum.h" - -#ifdef USE_MATRIX_I2C -# include "i2c.h" -#else // USE_SERIAL -# include "split_scomm.h" -#endif - -#ifndef DEBOUNCE -# define DEBOUNCE 5 -#endif - -#define ERROR_DISCONNECT_COUNT 5 - -static uint8_t debouncing = DEBOUNCE; -static const int ROWS_PER_HAND = MATRIX_ROWS/2; -static uint8_t error_count = 0; -uint8_t is_master = 0 ; - -static const uint8_t row_pins[MATRIX_ROWS] = MATRIX_ROW_PINS; -static const uint8_t col_pins[MATRIX_COLS] = MATRIX_COL_PINS; - -/* matrix state(1:on, 0:off) */ -static matrix_row_t matrix[MATRIX_ROWS]; -static matrix_row_t matrix_debouncing[MATRIX_ROWS]; - -static matrix_row_t read_cols(void); -static void init_cols(void); -static void unselect_rows(void); -static void select_row(uint8_t row); -static uint8_t matrix_master_scan(void); - - -__attribute__ ((weak)) -void matrix_init_kb(void) { - matrix_init_user(); -} - -__attribute__ ((weak)) -void matrix_scan_kb(void) { - matrix_scan_user(); -} - -__attribute__ ((weak)) -void matrix_init_user(void) { -} - -__attribute__ ((weak)) -void matrix_scan_user(void) { -} - -inline -uint8_t matrix_rows(void) -{ - return MATRIX_ROWS; -} - -inline -uint8_t matrix_cols(void) -{ - return MATRIX_COLS; -} - -void matrix_init(void) -{ - debug_enable = true; - debug_matrix = true; - debug_mouse = true; - // initialize row and col - unselect_rows(); - init_cols(); - - setPinOutput(B0); - setPinOutput(D5); - writePinHigh(B0); - writePinHigh(D5); - - // initialize matrix state: all keys off - for (uint8_t i=0; i < MATRIX_ROWS; i++) { - matrix[i] = 0; - matrix_debouncing[i] = 0; - } - - is_master = has_usb(); - - matrix_init_quantum(); -} - -uint8_t _matrix_scan(void) -{ - // Right hand is stored after the left in the matirx so, we need to offset it - int offset = isLeftHand ? 0 : (ROWS_PER_HAND); - - for (uint8_t i = 0; i < ROWS_PER_HAND; i++) { - select_row(i); - _delay_us(30); // without this wait read unstable value. - matrix_row_t cols = read_cols(); - if (matrix_debouncing[i+offset] != cols) { - matrix_debouncing[i+offset] = cols; - debouncing = DEBOUNCE; - } - unselect_rows(); - } - - if (debouncing) { - if (--debouncing) { - _delay_ms(1); - } else { - for (uint8_t i = 0; i < ROWS_PER_HAND; i++) { - matrix[i+offset] = matrix_debouncing[i+offset]; - } - } - } - - return 1; -} - -#ifdef USE_MATRIX_I2C - -// Get rows from other half over i2c -int i2c_transaction(void) { - int slaveOffset = (isLeftHand) ? (ROWS_PER_HAND) : 0; - - int err = i2c_master_start(SLAVE_I2C_ADDRESS + I2C_WRITE); - if (err) goto i2c_error; - - // start of matrix stored at 0x00 - err = i2c_master_write(0x00); - if (err) goto i2c_error; - - // Start read - err = i2c_master_start(SLAVE_I2C_ADDRESS + I2C_READ); - if (err) goto i2c_error; - - if (!err) { - int i; - for (i = 0; i < ROWS_PER_HAND-1; ++i) { - matrix[slaveOffset+i] = i2c_master_read(I2C_ACK); - } - matrix[slaveOffset+i] = i2c_master_read(I2C_NACK); - i2c_master_stop(); - } else { -i2c_error: // the cable is disconnceted, or something else went wrong - i2c_reset_state(); - return err; - } - - return 0; -} - -#else // USE_SERIAL - -int serial_transaction(int master_changed) { - int slaveOffset = (isLeftHand) ? (ROWS_PER_HAND) : 0; -#ifdef SERIAL_USE_MULTI_TRANSACTION - int ret=serial_update_buffers(master_changed); -#else - int ret=serial_update_buffers(); -#endif - if (ret ) { - if(ret==2) writePinLow(B0); - return 1; - } - writePinHigh(B0); - memcpy(&matrix[slaveOffset], - (void *)serial_slave_buffer, SERIAL_SLAVE_BUFFER_LENGTH); - return 0; -} -#endif - -uint8_t matrix_scan(void) -{ - if (is_master) { - matrix_master_scan(); - }else{ - matrix_slave_scan(); - int offset = (isLeftHand) ? ROWS_PER_HAND : 0; - memcpy(&matrix[offset], - (void *)serial_master_buffer, SERIAL_MASTER_BUFFER_LENGTH); - matrix_scan_quantum(); - } - return 1; -} - - -uint8_t matrix_master_scan(void) { - - int ret = _matrix_scan(); - int mchanged = 1; - - int offset = (isLeftHand) ? 0 : ROWS_PER_HAND; - -#ifdef USE_MATRIX_I2C -// for (int i = 0; i < ROWS_PER_HAND; ++i) { - /* i2c_slave_buffer[i] = matrix[offset+i]; */ -// i2c_slave_buffer[i] = matrix[offset+i]; -// } -#else // USE_SERIAL - #ifdef SERIAL_USE_MULTI_TRANSACTION - mchanged = memcmp((void *)serial_master_buffer, - &matrix[offset], SERIAL_MASTER_BUFFER_LENGTH); - #endif - memcpy((void *)serial_master_buffer, - &matrix[offset], SERIAL_MASTER_BUFFER_LENGTH); -#endif - -#ifdef USE_MATRIX_I2C - if( i2c_transaction() ) { -#else // USE_SERIAL - if( serial_transaction(mchanged) ) { -#endif - // turn on the indicator led when halves are disconnected - writePinLow(D5); - - error_count++; - - if (error_count > ERROR_DISCONNECT_COUNT) { - // reset other half if disconnected - int slaveOffset = (isLeftHand) ? (ROWS_PER_HAND) : 0; - for (int i = 0; i < ROWS_PER_HAND; ++i) { - matrix[slaveOffset+i] = 0; - } - } - } else { - // turn off the indicator led on no error - writePinHigh(D5); - error_count = 0; - } - matrix_scan_quantum(); - return ret; -} - -void matrix_slave_scan(void) { - _matrix_scan(); - - int offset = (isLeftHand) ? 0 : ROWS_PER_HAND; - -#ifdef USE_MATRIX_I2C - for (int i = 0; i < ROWS_PER_HAND; ++i) { - /* i2c_slave_buffer[i] = matrix[offset+i]; */ - i2c_slave_buffer[i] = matrix[offset+i]; - } -#else // USE_SERIAL - #ifdef SERIAL_USE_MULTI_TRANSACTION - int change = 0; - #endif - for (int i = 0; i < ROWS_PER_HAND; ++i) { - #ifdef SERIAL_USE_MULTI_TRANSACTION - if( serial_slave_buffer[i] != matrix[offset+i] ) - change = 1; - #endif - serial_slave_buffer[i] = matrix[offset+i]; - } - #ifdef SERIAL_USE_MULTI_TRANSACTION - slave_buffer_change_count += change; - #endif -#endif -} - -bool matrix_is_modified(void) -{ - if (debouncing) return false; - return true; -} - -inline -bool matrix_is_on(uint8_t row, uint8_t col) -{ - return (matrix[row] & ((matrix_row_t)1<<col)); -} - -inline -matrix_row_t matrix_get_row(uint8_t row) -{ - return matrix[row]; -} - -void matrix_print(void) -{ - print("\nr/c 0123456789ABCDEF\n"); - for (uint8_t row = 0; row < MATRIX_ROWS; row++) { - phex(row); print(": "); - pbin_reverse16(matrix_get_row(row)); - print("\n"); - } -} - -uint8_t matrix_key_count(void) -{ - uint8_t count = 0; - for (uint8_t i = 0; i < MATRIX_ROWS; i++) { - count += bitpop16(matrix[i]); - } - return count; -} - -static void init_cols(void) -{ - for(int x = 0; x < MATRIX_COLS; x++) { - _SFR_IO8((col_pins[x] >> 4) + 1) &= ~_BV(col_pins[x] & 0xF); - _SFR_IO8((col_pins[x] >> 4) + 2) |= _BV(col_pins[x] & 0xF); - } -} - -static matrix_row_t read_cols(void) -{ - matrix_row_t result = 0; - for(int x = 0; x < MATRIX_COLS; x++) { - result |= (_SFR_IO8(col_pins[x] >> 4) & _BV(col_pins[x] & 0xF)) ? 0 : (1 << x); - } - return result; -} - -static void unselect_rows(void) -{ - for(int x = 0; x < ROWS_PER_HAND; x++) { - _SFR_IO8((row_pins[x] >> 4) + 1) &= ~_BV(row_pins[x] & 0xF); - _SFR_IO8((row_pins[x] >> 4) + 2) |= _BV(row_pins[x] & 0xF); - } -} - -static void select_row(uint8_t row) -{ - _SFR_IO8((row_pins[row] >> 4) + 1) |= _BV(row_pins[row] & 0xF); - _SFR_IO8((row_pins[row] >> 4) + 2) &= ~_BV(row_pins[row] & 0xF); -} diff --git a/keyboards/claw44/rev1/rev1.c b/keyboards/claw44/rev1/rev1.c index 9529636f56..520a869e57 100644 --- a/keyboards/claw44/rev1/rev1.c +++ b/keyboards/claw44/rev1/rev1.c @@ -1,8 +1 @@ -#include "claw44.h" - -#ifdef SSD1306OLED -void led_set_kb(uint8_t usb_led) { - // put your keyboard LED indicator (ex: Caps Lock LED) toggling code here - //led_set_user(usb_led); -} -#endif +#include "rev1.h" diff --git a/keyboards/claw44/rev1/rev1.h b/keyboards/claw44/rev1/rev1.h index c6c9057fdc..79ae9586db 100644 --- a/keyboards/claw44/rev1/rev1.h +++ b/keyboards/claw44/rev1/rev1.h @@ -1,55 +1,33 @@ #pragma once -#include "../claw44.h" - #include "quantum.h" -#ifdef RGBLIGHT_ENABLE -//rgb led driver -#include "ws2812.h" -#endif - -#ifdef USE_I2C -#include <stddef.h> -#ifdef __AVR__ - #include <avr/io.h> - #include <avr/interrupt.h> -#endif -#endif - #define LAYOUT( \ - L00, L01, L02, L03, L04, L05, R00, R01, R02, R03, R04, R05, \ - L10, L11, L12, L13, L14, L15, R10, R11, R12, R13, R14, R15, \ - L20, L21, L22, L23, L24, L25, R20, R21, R22, R23, R24, R25, \ - L30, L31, L32, L33, R30, R31, R32, R33 \ - ) \ - { \ - { L00, L01, L02, L03, L04, L05 }, \ - { L10, L11, L12, L13, L14, L15 }, \ - { L20, L21, L22, L23, L24, L25 }, \ - { KC_NO, KC_NO, L30, L31, L32, L33 }, \ - { R05, R04, R03, R02, R01, R00 }, \ - { R15, R14, R13, R12, R11, R10 }, \ - { R25, R24, R23, R22, R21, R20 }, \ - { KC_NO, KC_NO, R33, R32, R31, R30 } \ - } + L00, L01, L02, L03, L04, L05, R00, R01, R02, R03, R04, R05, \ + L10, L11, L12, L13, L14, L15, R10, R11, R12, R13, R14, R15, \ + L20, L21, L22, L23, L24, L25, R20, R21, R22, R23, R24, R25, \ + L30, L31, L32, L33, R30, R31, R32, R33 \ + ) \ + { \ + { L00, L01, L02, L03, L04, L05 }, \ + { L10, L11, L12, L13, L14, L15 }, \ + { L20, L21, L22, L23, L24, L25 }, \ + { KC_NO, KC_NO, L30, L31, L32, L33 }, \ + { R05, R04, R03, R02, R01, R00 }, \ + { R15, R14, R13, R12, R11, R10 }, \ + { R25, R24, R23, R22, R21, R20 }, \ + { KC_NO, KC_NO, R33, R32, R31, R30 } \ + } #define LAYOUT_kc( \ - L00, L01, L02, L03, L04, L05, R00, R01, R02, R03, R04, R05, \ - L10, L11, L12, L13, L14, L15, R10, R11, R12, R13, R14, R15, \ - L20, L21, L22, L23, L24, L25, R20, R21, R22, R23, R24, R25, \ - L30, L31, L32, L33, R30, R31, R32, R33 \ - ) \ - LAYOUT( \ - KC_##L00, KC_##L01, KC_##L02, KC_##L03, KC_##L04, KC_##L05, KC_##R00, KC_##R01, KC_##R02, KC_##R03, KC_##R04, KC_##R05, \ - KC_##L10, KC_##L11, KC_##L12, KC_##L13, KC_##L14, KC_##L15, KC_##R10, KC_##R11, KC_##R12, KC_##R13, KC_##R14, KC_##R15, \ - KC_##L20, KC_##L21, KC_##L22, KC_##L23, KC_##L24, KC_##L25, KC_##R20, KC_##R21, KC_##R22, KC_##R23, KC_##R24, KC_##R25, \ - KC_##L30, KC_##L31, KC_##L32, KC_##L33, KC_##R30, KC_##R31, KC_##R32, KC_##R33 \ - ) - -enum layer_number { - _QWERTY = 0, - _LOWER, - _RAISE, - _ADJUST, -}; + L00, L01, L02, L03, L04, L05, R00, R01, R02, R03, R04, R05, \ + L10, L11, L12, L13, L14, L15, R10, R11, R12, R13, R14, R15, \ + L20, L21, L22, L23, L24, L25, R20, R21, R22, R23, R24, R25, \ + L30, L31, L32, L33, R30, R31, R32, R33 \ + ) \ + LAYOUT( \ + KC_##L00, KC_##L01, KC_##L02, KC_##L03, KC_##L04, KC_##L05, KC_##R00, KC_##R01, KC_##R02, KC_##R03, KC_##R04, KC_##R05, \ + KC_##L10, KC_##L11, KC_##L12, KC_##L13, KC_##L14, KC_##L15, KC_##R10, KC_##R11, KC_##R12, KC_##R13, KC_##R14, KC_##R15, \ + KC_##L20, KC_##L21, KC_##L22, KC_##L23, KC_##L24, KC_##L25, KC_##R20, KC_##R21, KC_##R22, KC_##R23, KC_##R24, KC_##R25, \ + KC_##L30, KC_##L31, KC_##L32, KC_##L33, KC_##R30, KC_##R31, KC_##R32, KC_##R33 \ + ) diff --git a/keyboards/claw44/rev1/rules.mk b/keyboards/claw44/rev1/rules.mk index 016bc362a1..b1af22c59a 100644 --- a/keyboards/claw44/rev1/rules.mk +++ b/keyboards/claw44/rev1/rules.mk @@ -1,7 +1,3 @@ -SRC += rev1/matrix.c -SRC += rev1/split_util.c -SRC += rev1/split_scomm.c - # Build Options BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration MOUSEKEY_ENABLE = no # Mouse keys @@ -10,7 +6,6 @@ CONSOLE_ENABLE = no # Console for debug COMMAND_ENABLE = no # Commands for debug and configuration NKRO_ENABLE = no # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality -MIDI_ENABLE = no # MIDI controls AUDIO_ENABLE = no # Audio output on port C6 UNICODE_ENABLE = no # Unicode BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID @@ -20,12 +15,5 @@ SWAP_HANDS_ENABLE = no # Enable one-hand typing # Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend -# If you want to change the display of OLED, you need to change here -SRC += ./lib/glcdfont.c \ - ./lib/layer_state_reader.c \ - ./lib/logo_reader.c \ - ./lib/keylogger.c \ - # ./lib/rgb_state_reader.c \ - # ./lib/mode_icon_reader.c \ - # ./lib/host_led_state_reader.c \ - # ./lib/timelogger.c \ +OLED_DRIVER_ENABLE = no # Add OLED displays support +SPLIT_KEYBOARD = yes diff --git a/keyboards/claw44/rev1/serial_config.h b/keyboards/claw44/rev1/serial_config.h deleted file mode 100644 index 4fab8e8ddf..0000000000 --- a/keyboards/claw44/rev1/serial_config.h +++ /dev/null @@ -1,4 +0,0 @@ -#ifndef SOFT_SERIAL_PIN -#define SOFT_SERIAL_PIN D2 -#define SERIAL_USE_MULTI_TRANSACTION -#endif diff --git a/keyboards/claw44/rev1/split_scomm.c b/keyboards/claw44/rev1/split_scomm.c deleted file mode 100644 index a1fe6ba5b8..0000000000 --- a/keyboards/claw44/rev1/split_scomm.c +++ /dev/null @@ -1,91 +0,0 @@ -#ifdef USE_SERIAL -#ifdef SERIAL_USE_MULTI_TRANSACTION -/* --- USE flexible API (using multi-type transaction function) --- */ - -#include <stdbool.h> -#include <stdint.h> -#include <stddef.h> -#include <split_scomm.h> -#include "serial.h" -#ifdef CONSOLE_ENABLE - #include <print.h> -#endif - -uint8_t volatile serial_slave_buffer[SERIAL_SLAVE_BUFFER_LENGTH] = {0}; -uint8_t volatile serial_master_buffer[SERIAL_MASTER_BUFFER_LENGTH] = {0}; -uint8_t volatile status_com = 0; -uint8_t volatile status1 = 0; -uint8_t slave_buffer_change_count = 0; -uint8_t s_change_old = 0xff; -uint8_t s_change_new = 0xff; - -SSTD_t transactions[] = { -#define GET_SLAVE_STATUS 0 - /* master buffer not changed, only recive slave_buffer_change_count */ - { (uint8_t *)&status_com, - 0, NULL, - sizeof(slave_buffer_change_count), &slave_buffer_change_count, - }, -#define PUT_MASTER_GET_SLAVE_STATUS 1 - /* master buffer changed need send, and recive slave_buffer_change_count */ - { (uint8_t *)&status_com, - sizeof(serial_master_buffer), (uint8_t *)serial_master_buffer, - sizeof(slave_buffer_change_count), &slave_buffer_change_count, - }, -#define GET_SLAVE_BUFFER 2 - /* recive serial_slave_buffer */ - { (uint8_t *)&status1, - 0, NULL, - sizeof(serial_slave_buffer), (uint8_t *)serial_slave_buffer - } -}; - -void serial_master_init(void) -{ - soft_serial_initiator_init(transactions, TID_LIMIT(transactions)); -} - -void serial_slave_init(void) -{ - soft_serial_target_init(transactions, TID_LIMIT(transactions)); -} - -// 0 => no error -// 1 => slave did not respond -// 2 => checksum error -int serial_update_buffers(int master_update) -{ - int status, smatstatus; - static int need_retry = 0; - - if( s_change_old != s_change_new ) { - smatstatus = soft_serial_transaction(GET_SLAVE_BUFFER); - if( smatstatus == TRANSACTION_END ) { - s_change_old = s_change_new; -#ifdef CONSOLE_ENABLE - uprintf("slave matrix = %b %b %b %b\n", - serial_slave_buffer[0], serial_slave_buffer[1], - serial_slave_buffer[2], serial_slave_buffer[3]); -#endif - } - } else { - // serial_slave_buffer dosen't change - smatstatus = TRANSACTION_END; // dummy status - } - - if( !master_update && !need_retry) { - status = soft_serial_transaction(GET_SLAVE_STATUS); - } else { - status = soft_serial_transaction(PUT_MASTER_GET_SLAVE_STATUS); - } - if( status == TRANSACTION_END ) { - s_change_new = slave_buffer_change_count; - need_retry = 0; - } else { - need_retry = 1; - } - return smatstatus; -} - -#endif // SERIAL_USE_MULTI_TRANSACTION -#endif /* USE_SERIAL */ diff --git a/keyboards/claw44/rev1/split_scomm.h b/keyboards/claw44/rev1/split_scomm.h deleted file mode 100644 index 873d8939d8..0000000000 --- a/keyboards/claw44/rev1/split_scomm.h +++ /dev/null @@ -1,24 +0,0 @@ -#ifndef SPLIT_COMM_H -#define SPLIT_COMM_H - -#ifndef SERIAL_USE_MULTI_TRANSACTION -/* --- USE Simple API (OLD API, compatible with let's split serial.c) --- */ -#include "serial.h" - -#else -/* --- USE flexible API (using multi-type transaction function) --- */ -// Buffers for master - slave communication -#define SERIAL_SLAVE_BUFFER_LENGTH MATRIX_ROWS/2 -#define SERIAL_MASTER_BUFFER_LENGTH MATRIX_ROWS/2 - -extern volatile uint8_t serial_slave_buffer[SERIAL_SLAVE_BUFFER_LENGTH]; -extern volatile uint8_t serial_master_buffer[SERIAL_MASTER_BUFFER_LENGTH]; -extern uint8_t slave_buffer_change_count; - -void serial_master_init(void); -void serial_slave_init(void); -int serial_update_buffers(int master_changed); - -#endif - -#endif /* SPLIT_COMM_H */ diff --git a/keyboards/claw44/rev1/split_util.c b/keyboards/claw44/rev1/split_util.c deleted file mode 100644 index e1ff8b4379..0000000000 --- a/keyboards/claw44/rev1/split_util.c +++ /dev/null @@ -1,70 +0,0 @@ -#include <avr/io.h> -#include <avr/wdt.h> -#include <avr/power.h> -#include <avr/interrupt.h> -#include <util/delay.h> -#include <avr/eeprom.h> -#include "split_util.h" -#include "matrix.h" -#include "keyboard.h" - -#ifdef USE_MATRIX_I2C -# include "i2c.h" -#else -# include "split_scomm.h" -#endif - -volatile bool isLeftHand = true; - -static void setup_handedness(void) { - #ifdef EE_HANDS - isLeftHand = eeprom_read_byte(EECONFIG_HANDEDNESS); - #else - // I2C_MASTER_RIGHT is deprecated, use MASTER_RIGHT instead, since this works for both serial and i2c - #if defined(I2C_MASTER_RIGHT) || defined(MASTER_RIGHT) - isLeftHand = !has_usb(); - #else - isLeftHand = has_usb(); - #endif - #endif -} - -static void keyboard_master_setup(void) { - -#ifdef USE_MATRIX_I2C - i2c_master_init(); -#else - serial_master_init(); -#endif -} - -static void keyboard_slave_setup(void) { - -#ifdef USE_MATRIX_I2C - i2c_slave_init(SLAVE_I2C_ADDRESS); -#else - serial_slave_init(); -#endif -} - -bool has_usb(void) { - USBCON |= (1 << OTGPADE); //enables VBUS pad - _delay_us(5); - return (USBSTA & (1<<VBUS)); //checks state of VBUS -} - -void split_keyboard_setup(void) { - setup_handedness(); - - if (has_usb()) { - keyboard_master_setup(); - } else { - keyboard_slave_setup(); - } - sei(); -} - -// this code runs before the usb and keyboard is initialized -void matrix_setup(void) { - split_keyboard_setup(); -} diff --git a/keyboards/claw44/rev1/split_util.h b/keyboards/claw44/rev1/split_util.h deleted file mode 100644 index 687ca19bd3..0000000000 --- a/keyboards/claw44/rev1/split_util.h +++ /dev/null @@ -1,19 +0,0 @@ -#ifndef SPLIT_KEYBOARD_UTIL_H -#define SPLIT_KEYBOARD_UTIL_H - -#include <stdbool.h> -#include "eeconfig.h" - -#define SLAVE_I2C_ADDRESS 0x32 - -extern volatile bool isLeftHand; - -// slave version of matix scan, defined in matrix.c -void matrix_slave_scan(void); - -void split_keyboard_setup(void); -bool has_usb(void); - -void matrix_master_OLED_init (void); - -#endif diff --git a/keyboards/claw44/rules.mk b/keyboards/claw44/rules.mk index f872b9ebfa..f4d44b23b7 100644 --- a/keyboards/claw44/rules.mk +++ b/keyboards/claw44/rules.mk @@ -22,7 +22,6 @@ CONSOLE_ENABLE = no # Console for debug COMMAND_ENABLE = no # Commands for debug and configuration NKRO_ENABLE = no # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality -MIDI_ENABLE = no # MIDI controls AUDIO_ENABLE = no # Audio output on port C6 UNICODE_ENABLE = no # Unicode BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID @@ -30,12 +29,4 @@ RGBLIGHT_ENABLE = no # Enable WS2812 RGB underlight. # Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend -CUSTOM_MATRIX = yes -SRC += i2c.c -SRC += serial.c -SRC += ssd1306.c - -# if firmware size over limit, try this option -# CFLAGS += -flto - DEFAULT_FOLDER = claw44/rev1 diff --git a/keyboards/claw44/serial.c b/keyboards/claw44/serial.c deleted file mode 100644 index f6293c3dc2..0000000000 --- a/keyboards/claw44/serial.c +++ /dev/null @@ -1,589 +0,0 @@ -/* - * WARNING: be careful changing this code, it is very timing dependent - * - * 2018-10-28 checked - * avr-gcc 4.9.2 - * avr-gcc 5.4.0 - * avr-gcc 7.3.0 - */ - -#ifndef F_CPU -#define F_CPU 16000000 -#endif - -#include <avr/io.h> -#include <avr/interrupt.h> -#include <util/delay.h> -#include <stddef.h> -#include <stdbool.h> -#include "serial.h" - -#ifdef SOFT_SERIAL_PIN - -#ifdef __AVR_ATmega32U4__ - // if using ATmega32U4 I2C, can not use PD0 and PD1 in soft serial. - #ifdef USE_I2C - #if SOFT_SERIAL_PIN == D0 || SOFT_SERIAL_PIN == D1 - #error Using ATmega32U4 I2C, so can not use PD0, PD1 - #endif - #endif - - #if SOFT_SERIAL_PIN >= D0 && SOFT_SERIAL_PIN <= D3 - #define SERIAL_PIN_DDR DDRD - #define SERIAL_PIN_PORT PORTD - #define SERIAL_PIN_INPUT PIND - #if SOFT_SERIAL_PIN == D0 - #define SERIAL_PIN_MASK _BV(PD0) - #define EIMSK_BIT _BV(INT0) - #define EICRx_BIT (~(_BV(ISC00) | _BV(ISC01))) - #define SERIAL_PIN_INTERRUPT INT0_vect - #elif SOFT_SERIAL_PIN == D1 - #define SERIAL_PIN_MASK _BV(PD1) - #define EIMSK_BIT _BV(INT1) - #define EICRx_BIT (~(_BV(ISC10) | _BV(ISC11))) - #define SERIAL_PIN_INTERRUPT INT1_vect - #elif SOFT_SERIAL_PIN == D2 - #define SERIAL_PIN_MASK _BV(PD2) - #define EIMSK_BIT _BV(INT2) - #define EICRx_BIT (~(_BV(ISC20) | _BV(ISC21))) - #define SERIAL_PIN_INTERRUPT INT2_vect - #elif SOFT_SERIAL_PIN == D3 - #define SERIAL_PIN_MASK _BV(PD3) - #define EIMSK_BIT _BV(INT3) - #define EICRx_BIT (~(_BV(ISC30) | _BV(ISC31))) - #define SERIAL_PIN_INTERRUPT INT3_vect - #endif - #elif SOFT_SERIAL_PIN == E6 - #define SERIAL_PIN_DDR DDRE - #define SERIAL_PIN_PORT PORTE - #define SERIAL_PIN_INPUT PINE - #define SERIAL_PIN_MASK _BV(PE6) - #define EIMSK_BIT _BV(INT6) - #define EICRx_BIT (~(_BV(ISC60) | _BV(ISC61))) - #define SERIAL_PIN_INTERRUPT INT6_vect - #else - #error invalid SOFT_SERIAL_PIN value - #endif - -#else - #error serial.c now support ATmega32U4 only -#endif - -//////////////// for backward compatibility //////////////////////////////// -#ifndef SERIAL_USE_MULTI_TRANSACTION -/* --- USE Simple API (OLD API, compatible with let's split serial.c) */ - #if SERIAL_SLAVE_BUFFER_LENGTH > 0 - uint8_t volatile serial_slave_buffer[SERIAL_SLAVE_BUFFER_LENGTH] = {0}; - #endif - #if SERIAL_MASTER_BUFFER_LENGTH > 0 - uint8_t volatile serial_master_buffer[SERIAL_MASTER_BUFFER_LENGTH] = {0}; - #endif - uint8_t volatile status0 = 0; - -SSTD_t transactions[] = { - { (uint8_t *)&status0, - #if SERIAL_MASTER_BUFFER_LENGTH > 0 - sizeof(serial_master_buffer), (uint8_t *)serial_master_buffer, - #else - 0, (uint8_t *)NULL, - #endif - #if SERIAL_SLAVE_BUFFER_LENGTH > 0 - sizeof(serial_slave_buffer), (uint8_t *)serial_slave_buffer - #else - 0, (uint8_t *)NULL, - #endif - } -}; - -void serial_master_init(void) -{ soft_serial_initiator_init(transactions, TID_LIMIT(transactions)); } - -void serial_slave_init(void) -{ soft_serial_target_init(transactions, TID_LIMIT(transactions)); } - -// 0 => no error -// 1 => slave did not respond -// 2 => checksum error -int serial_update_buffers() -{ - int result; - result = soft_serial_transaction(); - return result; -} - -#endif // end of Simple API (OLD API, compatible with let's split serial.c) -//////////////////////////////////////////////////////////////////////////// - -#define ALWAYS_INLINE __attribute__((always_inline)) -#define NO_INLINE __attribute__((noinline)) -#define _delay_sub_us(x) __builtin_avr_delay_cycles(x) - -// parity check -#define ODD_PARITY 1 -#define EVEN_PARITY 0 -#define PARITY EVEN_PARITY - -#ifdef SERIAL_DELAY - // custom setup in config.h - // #define TID_SEND_ADJUST 2 - // #define SERIAL_DELAY 6 // micro sec - // #define READ_WRITE_START_ADJUST 30 // cycles - // #define READ_WRITE_WIDTH_ADJUST 8 // cycles -#else -// ============ Standard setups ============ - -#ifndef SELECT_SOFT_SERIAL_SPEED -#define SELECT_SOFT_SERIAL_SPEED 1 -// 0: about 189kbps -// 1: about 137kbps (default) -// 2: about 75kbps -// 3: about 39kbps -// 4: about 26kbps -// 5: about 20kbps -#endif - -#if __GNUC__ < 6 - #define TID_SEND_ADJUST 14 -#else - #define TID_SEND_ADJUST 2 -#endif - -#if SELECT_SOFT_SERIAL_SPEED == 0 - // Very High speed - #define SERIAL_DELAY 4 // micro sec - #if __GNUC__ < 6 - #define READ_WRITE_START_ADJUST 33 // cycles - #define READ_WRITE_WIDTH_ADJUST 3 // cycles - #else - #define READ_WRITE_START_ADJUST 34 // cycles - #define READ_WRITE_WIDTH_ADJUST 7 // cycles - #endif -#elif SELECT_SOFT_SERIAL_SPEED == 1 - // High speed - #define SERIAL_DELAY 6 // micro sec - #if __GNUC__ < 6 - #define READ_WRITE_START_ADJUST 30 // cycles - #define READ_WRITE_WIDTH_ADJUST 3 // cycles - #else - #define READ_WRITE_START_ADJUST 33 // cycles - #define READ_WRITE_WIDTH_ADJUST 7 // cycles - #endif -#elif SELECT_SOFT_SERIAL_SPEED == 2 - // Middle speed - #define SERIAL_DELAY 12 // micro sec - #define READ_WRITE_START_ADJUST 30 // cycles - #if __GNUC__ < 6 - #define READ_WRITE_WIDTH_ADJUST 3 // cycles - #else - #define READ_WRITE_WIDTH_ADJUST 7 // cycles - #endif -#elif SELECT_SOFT_SERIAL_SPEED == 3 - // Low speed - #define SERIAL_DELAY 24 // micro sec - #define READ_WRITE_START_ADJUST 30 // cycles - #if __GNUC__ < 6 - #define READ_WRITE_WIDTH_ADJUST 3 // cycles - #else - #define READ_WRITE_WIDTH_ADJUST 7 // cycles - #endif -#elif SELECT_SOFT_SERIAL_SPEED == 4 - // Very Low speed - #define SERIAL_DELAY 36 // micro sec - #define READ_WRITE_START_ADJUST 30 // cycles - #if __GNUC__ < 6 - #define READ_WRITE_WIDTH_ADJUST 3 // cycles - #else - #define READ_WRITE_WIDTH_ADJUST 7 // cycles - #endif -#elif SELECT_SOFT_SERIAL_SPEED == 5 - // Ultra Low speed - #define SERIAL_DELAY 48 // micro sec - #define READ_WRITE_START_ADJUST 30 // cycles - #if __GNUC__ < 6 - #define READ_WRITE_WIDTH_ADJUST 3 // cycles - #else - #define READ_WRITE_WIDTH_ADJUST 7 // cycles - #endif -#else -#error invalid SELECT_SOFT_SERIAL_SPEED value -#endif /* SELECT_SOFT_SERIAL_SPEED */ -#endif /* SERIAL_DELAY */ - -#define SERIAL_DELAY_HALF1 (SERIAL_DELAY/2) -#define SERIAL_DELAY_HALF2 (SERIAL_DELAY - SERIAL_DELAY/2) - -#define SLAVE_INT_WIDTH_US 1 -#ifndef SERIAL_USE_MULTI_TRANSACTION - #define SLAVE_INT_RESPONSE_TIME SERIAL_DELAY -#else - #define SLAVE_INT_ACK_WIDTH_UNIT 2 - #define SLAVE_INT_ACK_WIDTH 4 -#endif - -static SSTD_t *Transaction_table = NULL; -static uint8_t Transaction_table_size = 0; - -inline static void serial_delay(void) ALWAYS_INLINE; -inline static -void serial_delay(void) { - _delay_us(SERIAL_DELAY); -} - -inline static void serial_delay_half1(void) ALWAYS_INLINE; -inline static -void serial_delay_half1(void) { - _delay_us(SERIAL_DELAY_HALF1); -} - -inline static void serial_delay_half2(void) ALWAYS_INLINE; -inline static -void serial_delay_half2(void) { - _delay_us(SERIAL_DELAY_HALF2); -} - -inline static void serial_output(void) ALWAYS_INLINE; -inline static -void serial_output(void) { - SERIAL_PIN_DDR |= SERIAL_PIN_MASK; -} - -// make the serial pin an input with pull-up resistor -inline static void serial_input_with_pullup(void) ALWAYS_INLINE; -inline static -void serial_input_with_pullup(void) { - SERIAL_PIN_DDR &= ~SERIAL_PIN_MASK; - SERIAL_PIN_PORT |= SERIAL_PIN_MASK; -} - -inline static uint8_t serial_read_pin(void) ALWAYS_INLINE; -inline static -uint8_t serial_read_pin(void) { - return !!(SERIAL_PIN_INPUT & SERIAL_PIN_MASK); -} - -inline static void serial_low(void) ALWAYS_INLINE; -inline static -void serial_low(void) { - SERIAL_PIN_PORT &= ~SERIAL_PIN_MASK; -} - -inline static void serial_high(void) ALWAYS_INLINE; -inline static -void serial_high(void) { - SERIAL_PIN_PORT |= SERIAL_PIN_MASK; -} - -void soft_serial_initiator_init(SSTD_t *sstd_table, int sstd_table_size) -{ - Transaction_table = sstd_table; - Transaction_table_size = (uint8_t)sstd_table_size; - serial_output(); - serial_high(); -} - -void soft_serial_target_init(SSTD_t *sstd_table, int sstd_table_size) -{ - Transaction_table = sstd_table; - Transaction_table_size = (uint8_t)sstd_table_size; - serial_input_with_pullup(); - - // Enable INT0-INT3,INT6 - EIMSK |= EIMSK_BIT; -#if SERIAL_PIN_MASK == _BV(PE6) - // Trigger on falling edge of INT6 - EICRB &= EICRx_BIT; -#else - // Trigger on falling edge of INT0-INT3 - EICRA &= EICRx_BIT; -#endif -} - -// Used by the sender to synchronize timing with the reciver. -static void sync_recv(void) NO_INLINE; -static -void sync_recv(void) { - for (uint8_t i = 0; i < SERIAL_DELAY*5 && serial_read_pin(); i++ ) { - } - // This shouldn't hang if the target disconnects because the - // serial line will float to high if the target does disconnect. - while (!serial_read_pin()); -} - -// Used by the reciver to send a synchronization signal to the sender. -static void sync_send(void) NO_INLINE; -static -void sync_send(void) { - serial_low(); - serial_delay(); - serial_high(); -} - -// Reads a byte from the serial line -static uint8_t serial_read_chunk(uint8_t *pterrcount, uint8_t bit) NO_INLINE; -static uint8_t serial_read_chunk(uint8_t *pterrcount, uint8_t bit) { - uint8_t byte, i, p, pb; - - _delay_sub_us(READ_WRITE_START_ADJUST); - for( i = 0, byte = 0, p = PARITY; i < bit; i++ ) { - serial_delay_half1(); // read the middle of pulses - if( serial_read_pin() ) { - byte = (byte << 1) | 1; p ^= 1; - } else { - byte = (byte << 1) | 0; p ^= 0; - } - _delay_sub_us(READ_WRITE_WIDTH_ADJUST); - serial_delay_half2(); - } - /* recive parity bit */ - serial_delay_half1(); // read the middle of pulses - pb = serial_read_pin(); - _delay_sub_us(READ_WRITE_WIDTH_ADJUST); - serial_delay_half2(); - - *pterrcount += (p != pb)? 1 : 0; - - return byte; -} - -// Sends a byte with MSB ordering -void serial_write_chunk(uint8_t data, uint8_t bit) NO_INLINE; -void serial_write_chunk(uint8_t data, uint8_t bit) { - uint8_t b, p; - for( p = PARITY, b = 1<<(bit-1); b ; b >>= 1) { - if(data & b) { - serial_high(); p ^= 1; - } else { - serial_low(); p ^= 0; - } - serial_delay(); - } - /* send parity bit */ - if(p & 1) { serial_high(); } - else { serial_low(); } - serial_delay(); - - serial_low(); // sync_send() / senc_recv() need raise edge -} - -static void serial_send_packet(uint8_t *buffer, uint8_t size) NO_INLINE; -static -void serial_send_packet(uint8_t *buffer, uint8_t size) { - for (uint8_t i = 0; i < size; ++i) { - uint8_t data; - data = buffer[i]; - sync_send(); - serial_write_chunk(data,8); - } -} - -static uint8_t serial_recive_packet(uint8_t *buffer, uint8_t size) NO_INLINE; -static -uint8_t serial_recive_packet(uint8_t *buffer, uint8_t size) { - uint8_t pecount = 0; - for (uint8_t i = 0; i < size; ++i) { - uint8_t data; - sync_recv(); - data = serial_read_chunk(&pecount, 8); - buffer[i] = data; - } - return pecount == 0; -} - -inline static -void change_sender2reciver(void) { - sync_send(); //0 - serial_delay_half1(); //1 - serial_low(); //2 - serial_input_with_pullup(); //2 - serial_delay_half1(); //3 -} - -inline static -void change_reciver2sender(void) { - sync_recv(); //0 - serial_delay(); //1 - serial_low(); //3 - serial_output(); //3 - serial_delay_half1(); //4 -} - -static inline uint8_t nibble_bits_count(uint8_t bits) -{ - bits = (bits & 0x5) + (bits >> 1 & 0x5); - bits = (bits & 0x3) + (bits >> 2 & 0x3); - return bits; -} - -// interrupt handle to be used by the target device -ISR(SERIAL_PIN_INTERRUPT) { - -#ifndef SERIAL_USE_MULTI_TRANSACTION - serial_low(); - serial_output(); - SSTD_t *trans = Transaction_table; -#else - // recive transaction table index - uint8_t tid, bits; - uint8_t pecount = 0; - sync_recv(); - bits = serial_read_chunk(&pecount,7); - tid = bits>>3; - bits = (bits&7) != nibble_bits_count(tid); - if( bits || pecount> 0 || tid > Transaction_table_size ) { - return; - } - serial_delay_half1(); - - serial_high(); // response step1 low->high - serial_output(); - _delay_sub_us(SLAVE_INT_ACK_WIDTH_UNIT*SLAVE_INT_ACK_WIDTH); - SSTD_t *trans = &Transaction_table[tid]; - serial_low(); // response step2 ack high->low -#endif - - // target send phase - if( trans->target2initiator_buffer_size > 0 ) - serial_send_packet((uint8_t *)trans->target2initiator_buffer, - trans->target2initiator_buffer_size); - // target switch to input - change_sender2reciver(); - - // target recive phase - if( trans->initiator2target_buffer_size > 0 ) { - if (serial_recive_packet((uint8_t *)trans->initiator2target_buffer, - trans->initiator2target_buffer_size) ) { - *trans->status = TRANSACTION_ACCEPTED; - } else { - *trans->status = TRANSACTION_DATA_ERROR; - } - } else { - *trans->status = TRANSACTION_ACCEPTED; - } - - sync_recv(); //weit initiator output to high -} - -///////// -// start transaction by initiator -// -// int soft_serial_transaction(int sstd_index) -// -// Returns: -// TRANSACTION_END -// TRANSACTION_NO_RESPONSE -// TRANSACTION_DATA_ERROR -// this code is very time dependent, so we need to disable interrupts -#ifndef SERIAL_USE_MULTI_TRANSACTION -int soft_serial_transaction(void) { - SSTD_t *trans = Transaction_table; -#else -int soft_serial_transaction(int sstd_index) { - if( sstd_index > Transaction_table_size ) - return TRANSACTION_TYPE_ERROR; - SSTD_t *trans = &Transaction_table[sstd_index]; -#endif - cli(); - - // signal to the target that we want to start a transaction - serial_output(); - serial_low(); - _delay_us(SLAVE_INT_WIDTH_US); - -#ifndef SERIAL_USE_MULTI_TRANSACTION - // wait for the target response - serial_input_with_pullup(); - _delay_us(SLAVE_INT_RESPONSE_TIME); - - // check if the target is present - if (serial_read_pin()) { - // target failed to pull the line low, assume not present - serial_output(); - serial_high(); - *trans->status = TRANSACTION_NO_RESPONSE; - sei(); - return TRANSACTION_NO_RESPONSE; - } - -#else - // send transaction table index - int tid = (sstd_index<<3) | (7 & nibble_bits_count(sstd_index)); - sync_send(); - _delay_sub_us(TID_SEND_ADJUST); - serial_write_chunk(tid, 7); - serial_delay_half1(); - - // wait for the target response (step1 low->high) - serial_input_with_pullup(); - while( !serial_read_pin() ) { - _delay_sub_us(2); - } - - // check if the target is present (step2 high->low) - for( int i = 0; serial_read_pin(); i++ ) { - if (i > SLAVE_INT_ACK_WIDTH + 1) { - // slave failed to pull the line low, assume not present - serial_output(); - serial_high(); - *trans->status = TRANSACTION_NO_RESPONSE; - sei(); - return TRANSACTION_NO_RESPONSE; - } - _delay_sub_us(SLAVE_INT_ACK_WIDTH_UNIT); - } -#endif - - // initiator recive phase - // if the target is present syncronize with it - if( trans->target2initiator_buffer_size > 0 ) { - if (!serial_recive_packet((uint8_t *)trans->target2initiator_buffer, - trans->target2initiator_buffer_size) ) { - serial_output(); - serial_high(); - *trans->status = TRANSACTION_DATA_ERROR; - sei(); - return TRANSACTION_DATA_ERROR; - } - } - - // initiator switch to output - change_reciver2sender(); - - // initiator send phase - if( trans->initiator2target_buffer_size > 0 ) { - serial_send_packet((uint8_t *)trans->initiator2target_buffer, - trans->initiator2target_buffer_size); - } - - // always, release the line when not in use - sync_send(); - - *trans->status = TRANSACTION_END; - sei(); - return TRANSACTION_END; -} - -#ifdef SERIAL_USE_MULTI_TRANSACTION -int soft_serial_get_and_clean_status(int sstd_index) { - SSTD_t *trans = &Transaction_table[sstd_index]; - cli(); - int retval = *trans->status; - *trans->status = 0;; - sei(); - return retval; -} -#endif - -#endif - -// Helix serial.c history -// 2018-1-29 fork from let's split and add PD2, modify sync_recv() (#2308, bceffdefc) -// 2018-6-28 bug fix master to slave comm and speed up (#3255, 1038bbef4) -// (adjusted with avr-gcc 4.9.2) -// 2018-7-13 remove USE_SERIAL_PD2 macro (#3374, f30d6dd78) -// (adjusted with avr-gcc 4.9.2) -// 2018-8-11 add support multi-type transaction (#3608, feb5e4aae) -// (adjusted with avr-gcc 4.9.2) -// 2018-10-21 fix serial and RGB animation conflict (#4191, 4665e4fff) -// (adjusted with avr-gcc 7.3.0) -// 2018-10-28 re-adjust compiler depend value of delay (#4269, 8517f8a66) -// (adjusted with avr-gcc 5.4.0, 7.3.0) diff --git a/keyboards/claw44/serial.h b/keyboards/claw44/serial.h deleted file mode 100644 index 7e0c0847a4..0000000000 --- a/keyboards/claw44/serial.h +++ /dev/null @@ -1,84 +0,0 @@ -#ifndef SOFT_SERIAL_H -#define SOFT_SERIAL_H - -#include <stdbool.h> - -// ///////////////////////////////////////////////////////////////// -// Need Soft Serial defines in config.h -// ///////////////////////////////////////////////////////////////// -// ex. -// #define SOFT_SERIAL_PIN ?? // ?? = D0,D1,D2,D3,E6 -// OPTIONAL: #define SELECT_SOFT_SERIAL_SPEED ? // ? = 1,2,3,4,5 -// // 1: about 137kbps (default) -// // 2: about 75kbps -// // 3: about 39kbps -// // 4: about 26kbps -// // 5: about 20kbps -// -// //// USE Simple API (OLD API, compatible with let's split serial.c) -// ex. -// #define SERIAL_SLAVE_BUFFER_LENGTH MATRIX_ROWS/2 -// #define SERIAL_MASTER_BUFFER_LENGTH 1 -// -// //// USE flexible API (using multi-type transaction function) -// #define SERIAL_USE_MULTI_TRANSACTION -// -// ///////////////////////////////////////////////////////////////// - - -#ifndef SERIAL_USE_MULTI_TRANSACTION -/* --- USE Simple API (OLD API, compatible with let's split serial.c) */ -#if SERIAL_SLAVE_BUFFER_LENGTH > 0 -extern volatile uint8_t serial_slave_buffer[SERIAL_SLAVE_BUFFER_LENGTH]; -#endif -#if SERIAL_MASTER_BUFFER_LENGTH > 0 -extern volatile uint8_t serial_master_buffer[SERIAL_MASTER_BUFFER_LENGTH]; -#endif - -void serial_master_init(void); -void serial_slave_init(void); -int serial_update_buffers(void); - -#endif // USE Simple API - -// Soft Serial Transaction Descriptor -typedef struct _SSTD_t { - uint8_t *status; - uint8_t initiator2target_buffer_size; - uint8_t *initiator2target_buffer; - uint8_t target2initiator_buffer_size; - uint8_t *target2initiator_buffer; -} SSTD_t; -#define TID_LIMIT( table ) (sizeof(table) / sizeof(SSTD_t)) - -// initiator is transaction start side -void soft_serial_initiator_init(SSTD_t *sstd_table, int sstd_table_size); -// target is interrupt accept side -void soft_serial_target_init(SSTD_t *sstd_table, int sstd_table_size); - -// initiator resullt -#define TRANSACTION_END 0 -#define TRANSACTION_NO_RESPONSE 0x1 -#define TRANSACTION_DATA_ERROR 0x2 -#define TRANSACTION_TYPE_ERROR 0x4 -#ifndef SERIAL_USE_MULTI_TRANSACTION -int soft_serial_transaction(void); -#else -int soft_serial_transaction(int sstd_index); -#endif - -// target status -// *SSTD_t.status has -// initiator: -// TRANSACTION_END -// or TRANSACTION_NO_RESPONSE -// or TRANSACTION_DATA_ERROR -// target: -// TRANSACTION_DATA_ERROR -// or TRANSACTION_ACCEPTED -#define TRANSACTION_ACCEPTED 0x8 -#ifdef SERIAL_USE_MULTI_TRANSACTION -int soft_serial_get_and_clean_status(int sstd_index); -#endif - -#endif /* SOFT_SERIAL_H */ diff --git a/keyboards/claw44/ssd1306.c b/keyboards/claw44/ssd1306.c deleted file mode 100644 index 7dea1cc176..0000000000 --- a/keyboards/claw44/ssd1306.c +++ /dev/null @@ -1,345 +0,0 @@ -#ifdef SSD1306OLED - -#include "ssd1306.h" -#include "i2c.h" -#include <string.h> -#include "print.h" -#ifdef PROTOCOL_LUFA -#include "lufa.h" -#endif -#include "sendchar.h" -#include "timer.h" - -struct CharacterMatrix display; - -extern const unsigned char font[] PROGMEM; - -// Set this to 1 to help diagnose early startup problems -// when testing power-on with ble. Turn it off otherwise, -// as the latency of printing most of the debug info messes -// with the matrix scan, causing keys to drop. -#define DEBUG_TO_SCREEN 0 - -//static uint16_t last_battery_update; -//static uint32_t vbat; -//#define BatteryUpdateInterval 10000 /* milliseconds */ - -// 'last_flush' is declared as uint16_t, -// so this must be less than 65535 -#define ScreenOffInterval 60000 /* milliseconds */ -#if DEBUG_TO_SCREEN -static uint8_t displaying; -#endif -static uint16_t last_flush; - -static bool force_dirty = true; - -// Write command sequence. -// Returns true on success. -static inline bool _send_cmd1(uint8_t cmd) { - bool res = false; - - if (i2c_start_write(SSD1306_ADDRESS)) { - xprintf("failed to start write to %d\n", SSD1306_ADDRESS); - goto done; - } - - if (i2c_master_write(0x0 /* command byte follows */)) { - print("failed to write control byte\n"); - - goto done; - } - - if (i2c_master_write(cmd)) { - xprintf("failed to write command %d\n", cmd); - goto done; - } - res = true; -done: - i2c_master_stop(); - return res; -} - -// Write 2-byte command sequence. -// Returns true on success -static inline bool _send_cmd2(uint8_t cmd, uint8_t opr) { - if (!_send_cmd1(cmd)) { - return false; - } - return _send_cmd1(opr); -} - -// Write 3-byte command sequence. -// Returns true on success -static inline bool _send_cmd3(uint8_t cmd, uint8_t opr1, uint8_t opr2) { - if (!_send_cmd1(cmd)) { - return false; - } - if (!_send_cmd1(opr1)) { - return false; - } - return _send_cmd1(opr2); -} - -#define send_cmd1(c) if (!_send_cmd1(c)) {goto done;} -#define send_cmd2(c,o) if (!_send_cmd2(c,o)) {goto done;} -#define send_cmd3(c,o1,o2) if (!_send_cmd3(c,o1,o2)) {goto done;} - -static void clear_display(void) { - matrix_clear(&display); - - // Clear all of the display bits (there can be random noise - // in the RAM on startup) - send_cmd3(PageAddr, 0, (DisplayHeight / 8) - 1); - send_cmd3(ColumnAddr, 0, DisplayWidth - 1); - - if (i2c_start_write(SSD1306_ADDRESS)) { - goto done; - } - if (i2c_master_write(0x40)) { - // Data mode - goto done; - } - for (uint8_t row = 0; row < MatrixRows; ++row) { - for (uint8_t col = 0; col < DisplayWidth; ++col) { - i2c_master_write(0); - } - } - - display.dirty = false; - -done: - i2c_master_stop(); -} - -#if DEBUG_TO_SCREEN -#undef sendchar -static int8_t capture_sendchar(uint8_t c) { - sendchar(c); - iota_gfx_write_char(c); - - if (!displaying) { - iota_gfx_flush(); - } - return 0; -} -#endif - -bool iota_gfx_init(bool rotate) { - bool success = false; - - i2c_master_init(); - send_cmd1(DisplayOff); - send_cmd2(SetDisplayClockDiv, 0x80); - send_cmd2(SetMultiPlex, DisplayHeight - 1); - - send_cmd2(SetDisplayOffset, 0); - - - send_cmd1(SetStartLine | 0x0); - send_cmd2(SetChargePump, 0x14 /* Enable */); - send_cmd2(SetMemoryMode, 0 /* horizontal addressing */); - - if(rotate){ - // the following Flip the display orientation 180 degrees - send_cmd1(SegRemap); - send_cmd1(ComScanInc); - }else{ - // Flips the display orientation 0 degrees - send_cmd1(SegRemap | 0x1); - send_cmd1(ComScanDec); - } - - send_cmd2(SetComPins, 0x2); - send_cmd2(SetContrast, 0x8f); - send_cmd2(SetPreCharge, 0xf1); - send_cmd2(SetVComDetect, 0x40); - send_cmd1(DisplayAllOnResume); - send_cmd1(NormalDisplay); - send_cmd1(DeActivateScroll); - send_cmd1(DisplayOn); - - send_cmd2(SetContrast, 0); // Dim - - clear_display(); - - success = true; - - iota_gfx_flush(); - -#if DEBUG_TO_SCREEN - print_set_sendchar(capture_sendchar); -#endif - -done: - return success; -} - -bool iota_gfx_off(void) { - bool success = false; - - send_cmd1(DisplayOff); - success = true; - -done: - return success; -} - -bool iota_gfx_on(void) { - bool success = false; - - send_cmd1(DisplayOn); - success = true; - -done: - return success; -} - -void matrix_write_char_inner(struct CharacterMatrix *matrix, uint8_t c) { - *matrix->cursor = c; - ++matrix->cursor; - - if (matrix->cursor - &matrix->display[0][0] == sizeof(matrix->display)) { - // We went off the end; scroll the display upwards by one line - memmove(&matrix->display[0], &matrix->display[1], - MatrixCols * (MatrixRows - 1)); - matrix->cursor = &matrix->display[MatrixRows - 1][0]; - memset(matrix->cursor, ' ', MatrixCols); - } -} - -void matrix_write_char(struct CharacterMatrix *matrix, uint8_t c) { - matrix->dirty = true; - - if (c == '\n') { - // Clear to end of line from the cursor and then move to the - // start of the next line - uint8_t cursor_col = (matrix->cursor - &matrix->display[0][0]) % MatrixCols; - - while (cursor_col++ < MatrixCols) { - matrix_write_char_inner(matrix, ' '); - } - return; - } - - matrix_write_char_inner(matrix, c); -} - -void iota_gfx_write_char(uint8_t c) { - matrix_write_char(&display, c); -} - -void matrix_write(struct CharacterMatrix *matrix, const char *data) { - const char *end = data + strlen(data); - while (data < end) { - matrix_write_char(matrix, *data); - ++data; - } -} - -void matrix_write_ln(struct CharacterMatrix *matrix, const char *data) { - char data_ln[strlen(data)+2]; - snprintf(data_ln, sizeof(data_ln), "%s\n", data); - matrix_write(matrix, data_ln); -} - -void iota_gfx_write(const char *data) { - matrix_write(&display, data); -} - -void matrix_write_P(struct CharacterMatrix *matrix, const char *data) { - while (true) { - uint8_t c = pgm_read_byte(data); - if (c == 0) { - return; - } - matrix_write_char(matrix, c); - ++data; - } -} - -void iota_gfx_write_P(const char *data) { - matrix_write_P(&display, data); -} - -void matrix_clear(struct CharacterMatrix *matrix) { - memset(matrix->display, ' ', sizeof(matrix->display)); - matrix->cursor = &matrix->display[0][0]; - matrix->dirty = true; -} - -void iota_gfx_clear_screen(void) { - matrix_clear(&display); -} - -void matrix_render(struct CharacterMatrix *matrix) { - last_flush = timer_read(); - iota_gfx_on(); -#if DEBUG_TO_SCREEN - ++displaying; -#endif - - // Move to the home position - send_cmd3(PageAddr, 0, MatrixRows - 1); - send_cmd3(ColumnAddr, 0, (MatrixCols * FontWidth) - 1); - - if (i2c_start_write(SSD1306_ADDRESS)) { - goto done; - } - if (i2c_master_write(0x40)) { - // Data mode - goto done; - } - - for (uint8_t row = 0; row < MatrixRows; ++row) { - for (uint8_t col = 0; col < MatrixCols; ++col) { - const uint8_t *glyph = font + (matrix->display[row][col] * FontWidth); - - for (uint8_t glyphCol = 0; glyphCol < FontWidth; ++glyphCol) { - uint8_t colBits = pgm_read_byte(glyph + glyphCol); - i2c_master_write(colBits); - } - - // 1 column of space between chars (it's not included in the glyph) - //i2c_master_write(0); - } - } - - matrix->dirty = false; - -done: - i2c_master_stop(); -#if DEBUG_TO_SCREEN - --displaying; -#endif -} - -void iota_gfx_flush(void) { - matrix_render(&display); -} - -__attribute__ ((weak)) -void iota_gfx_task_user(void) { -} - -void iota_gfx_task(void) { - iota_gfx_task_user(); - - if (display.dirty|| force_dirty) { - iota_gfx_flush(); - force_dirty = false; - } - - /* - if (timer_elapsed(last_flush) > ScreenOffInterval) { - iota_gfx_off(); - } - */ -} - -bool process_record_gfx(uint16_t keycode, keyrecord_t *record) { - force_dirty = true; - return true; -} - -#endif diff --git a/keyboards/claw44/ssd1306.h b/keyboards/claw44/ssd1306.h deleted file mode 100644 index 11a3cc67f4..0000000000 --- a/keyboards/claw44/ssd1306.h +++ /dev/null @@ -1,90 +0,0 @@ -#pragma once - -#include <stdbool.h> -#include <stdio.h> -#include "action.h" - -enum ssd1306_cmds { - DisplayOff = 0xAE, - DisplayOn = 0xAF, - - SetContrast = 0x81, - DisplayAllOnResume = 0xA4, - - DisplayAllOn = 0xA5, - NormalDisplay = 0xA6, - InvertDisplay = 0xA7, - SetDisplayOffset = 0xD3, - SetComPins = 0xda, - SetVComDetect = 0xdb, - SetDisplayClockDiv = 0xD5, - SetPreCharge = 0xd9, - SetMultiPlex = 0xa8, - SetLowColumn = 0x00, - SetHighColumn = 0x10, - SetStartLine = 0x40, - - SetMemoryMode = 0x20, - ColumnAddr = 0x21, - PageAddr = 0x22, - - ComScanInc = 0xc0, - ComScanDec = 0xc8, - SegRemap = 0xa0, - SetChargePump = 0x8d, - ExternalVcc = 0x01, - SwitchCapVcc = 0x02, - - ActivateScroll = 0x2f, - DeActivateScroll = 0x2e, - SetVerticalScrollArea = 0xa3, - RightHorizontalScroll = 0x26, - LeftHorizontalScroll = 0x27, - VerticalAndRightHorizontalScroll = 0x29, - VerticalAndLeftHorizontalScroll = 0x2a, -}; - -// Controls the SSD1306 128x32 OLED display via i2c - -#ifndef SSD1306_ADDRESS -#define SSD1306_ADDRESS 0x3C -#endif - -#define DisplayHeight 32 -#define DisplayWidth 128 - -#define FontHeight 8 -#define FontWidth 6 - -#define MatrixRows (DisplayHeight / FontHeight) -#define MatrixCols (DisplayWidth / FontWidth) - -struct CharacterMatrix { - uint8_t display[MatrixRows][MatrixCols]; - uint8_t *cursor; - bool dirty; -}; - -extern struct CharacterMatrix display; - -bool iota_gfx_init(bool rotate); -void iota_gfx_task(void); -bool iota_gfx_off(void); -bool iota_gfx_on(void); -void iota_gfx_flush(void); -void iota_gfx_write_char(uint8_t c); -void iota_gfx_write(const char *data); -void iota_gfx_write_P(const char *data); -void iota_gfx_clear_screen(void); - -void iota_gfx_task_user(void); - -void matrix_clear(struct CharacterMatrix *matrix); -void matrix_write_char_inner(struct CharacterMatrix *matrix, uint8_t c); -void matrix_write_char(struct CharacterMatrix *matrix, uint8_t c); -void matrix_write(struct CharacterMatrix *matrix, const char *data); -void matrix_write_ln(struct CharacterMatrix *matrix, const char *data); -void matrix_write_P(struct CharacterMatrix *matrix, const char *data); -void matrix_render(struct CharacterMatrix *matrix); - -bool process_record_gfx(uint16_t keycode, keyrecord_t *record); |