diff options
69 files changed, 2563 insertions, 8236 deletions
diff --git a/build_keyboard.mk b/build_keyboard.mk index 4108704875..b4e1efd9ee 100644 --- a/build_keyboard.mk +++ b/build_keyboard.mk @@ -16,7 +16,6 @@ include common.mk KEYBOARD_FILESAFE := $(subst /,_,$(KEYBOARD)) TARGET ?= $(KEYBOARD_FILESAFE)_$(KEYMAP) KEYBOARD_OUTPUT := $(BUILD_DIR)/obj_$(KEYBOARD_FILESAFE) -STM32_PATH := quantum/stm32 # Force expansion TARGET := $(TARGET) @@ -138,7 +137,7 @@ endif ifeq ($(strip $(CONVERT_TO_PROTON_C)), yes) TARGET := $(TARGET)_proton_c - include $(STM32_PATH)/proton_c.mk + include platforms/chibios/GENERIC_STM32_F303XC/configs/proton_c.mk OPT_DEFS += -DCONVERT_TO_PROTON_C endif @@ -148,12 +147,6 @@ endif include quantum/mcu_selection.mk -ifdef MCU_FAMILY - OPT_DEFS += -DQMK_STM32 - KEYBOARD_PATHS += $(STM32_PATH) -endif - - # Find all the C source files to be compiled in subfolders. KEYBOARD_SRC := diff --git a/drivers/boards/BLACKPILL_STM32_F401/board.c b/drivers/boards/BLACKPILL_STM32_F401/board.c deleted file mode 100644 index 330e06c8aa..0000000000 --- a/drivers/boards/BLACKPILL_STM32_F401/board.c +++ /dev/null @@ -1,250 +0,0 @@ -/* - ChibiOS - Copyright (C) 2006..2018 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/* - * This file has been automatically generated using ChibiStudio board - * generator plugin. Do not edit manually. - */ - -#include "hal.h" -#include "stm32_gpio.h" - -/*===========================================================================*/ -/* Driver local definitions. */ -/*===========================================================================*/ - -/*===========================================================================*/ -/* Driver exported variables. */ -/*===========================================================================*/ - -/*===========================================================================*/ -/* Driver local variables and types. */ -/*===========================================================================*/ - -/** - * @brief Type of STM32 GPIO port setup. - */ -typedef struct { - uint32_t moder; - uint32_t otyper; - uint32_t ospeedr; - uint32_t pupdr; - uint32_t odr; - uint32_t afrl; - uint32_t afrh; -} gpio_setup_t; - -/** - * @brief Type of STM32 GPIO initialization data. - */ -typedef struct { -#if STM32_HAS_GPIOA || defined(__DOXYGEN__) - gpio_setup_t PAData; -#endif -#if STM32_HAS_GPIOB || defined(__DOXYGEN__) - gpio_setup_t PBData; -#endif -#if STM32_HAS_GPIOC || defined(__DOXYGEN__) - gpio_setup_t PCData; -#endif -#if STM32_HAS_GPIOD || defined(__DOXYGEN__) - gpio_setup_t PDData; -#endif -#if STM32_HAS_GPIOE || defined(__DOXYGEN__) - gpio_setup_t PEData; -#endif -#if STM32_HAS_GPIOF || defined(__DOXYGEN__) - gpio_setup_t PFData; -#endif -#if STM32_HAS_GPIOG || defined(__DOXYGEN__) - gpio_setup_t PGData; -#endif -#if STM32_HAS_GPIOH || defined(__DOXYGEN__) - gpio_setup_t PHData; -#endif -#if STM32_HAS_GPIOI || defined(__DOXYGEN__) - gpio_setup_t PIData; -#endif -#if STM32_HAS_GPIOJ || defined(__DOXYGEN__) - gpio_setup_t PJData; -#endif -#if STM32_HAS_GPIOK || defined(__DOXYGEN__) - gpio_setup_t PKData; -#endif -} gpio_config_t; - -/** - * @brief STM32 GPIO static initialization data. - */ -static const gpio_config_t gpio_default_config = { -#if STM32_HAS_GPIOA - {VAL_GPIOA_MODER, VAL_GPIOA_OTYPER, VAL_GPIOA_OSPEEDR, VAL_GPIOA_PUPDR, VAL_GPIOA_ODR, VAL_GPIOA_AFRL, VAL_GPIOA_AFRH}, -#endif -#if STM32_HAS_GPIOB - {VAL_GPIOB_MODER, VAL_GPIOB_OTYPER, VAL_GPIOB_OSPEEDR, VAL_GPIOB_PUPDR, VAL_GPIOB_ODR, VAL_GPIOB_AFRL, VAL_GPIOB_AFRH}, -#endif -#if STM32_HAS_GPIOC - {VAL_GPIOC_MODER, VAL_GPIOC_OTYPER, VAL_GPIOC_OSPEEDR, VAL_GPIOC_PUPDR, VAL_GPIOC_ODR, VAL_GPIOC_AFRL, VAL_GPIOC_AFRH}, -#endif -#if STM32_HAS_GPIOD - {VAL_GPIOD_MODER, VAL_GPIOD_OTYPER, VAL_GPIOD_OSPEEDR, VAL_GPIOD_PUPDR, VAL_GPIOD_ODR, VAL_GPIOD_AFRL, VAL_GPIOD_AFRH}, -#endif -#if STM32_HAS_GPIOE - {VAL_GPIOE_MODER, VAL_GPIOE_OTYPER, VAL_GPIOE_OSPEEDR, VAL_GPIOE_PUPDR, VAL_GPIOE_ODR, VAL_GPIOE_AFRL, VAL_GPIOE_AFRH}, -#endif -#if STM32_HAS_GPIOF - {VAL_GPIOF_MODER, VAL_GPIOF_OTYPER, VAL_GPIOF_OSPEEDR, VAL_GPIOF_PUPDR, VAL_GPIOF_ODR, VAL_GPIOF_AFRL, VAL_GPIOF_AFRH}, -#endif -#if STM32_HAS_GPIOG - {VAL_GPIOG_MODER, VAL_GPIOG_OTYPER, VAL_GPIOG_OSPEEDR, VAL_GPIOG_PUPDR, VAL_GPIOG_ODR, VAL_GPIOG_AFRL, VAL_GPIOG_AFRH}, -#endif -#if STM32_HAS_GPIOH - {VAL_GPIOH_MODER, VAL_GPIOH_OTYPER, VAL_GPIOH_OSPEEDR, VAL_GPIOH_PUPDR, VAL_GPIOH_ODR, VAL_GPIOH_AFRL, VAL_GPIOH_AFRH}, -#endif -#if STM32_HAS_GPIOI - {VAL_GPIOI_MODER, VAL_GPIOI_OTYPER, VAL_GPIOI_OSPEEDR, VAL_GPIOI_PUPDR, VAL_GPIOI_ODR, VAL_GPIOI_AFRL, VAL_GPIOI_AFRH}, -#endif -#if STM32_HAS_GPIOJ - {VAL_GPIOJ_MODER, VAL_GPIOJ_OTYPER, VAL_GPIOJ_OSPEEDR, VAL_GPIOJ_PUPDR, VAL_GPIOJ_ODR, VAL_GPIOJ_AFRL, VAL_GPIOJ_AFRH}, -#endif -#if STM32_HAS_GPIOK - {VAL_GPIOK_MODER, VAL_GPIOK_OTYPER, VAL_GPIOK_OSPEEDR, VAL_GPIOK_PUPDR, VAL_GPIOK_ODR, VAL_GPIOK_AFRL, VAL_GPIOK_AFRH} -#endif -}; - -/*===========================================================================*/ -/* Driver local functions. */ -/*===========================================================================*/ - -static void gpio_init(stm32_gpio_t *gpiop, const gpio_setup_t *config) { - gpiop->OTYPER = config->otyper; - gpiop->OSPEEDR = config->ospeedr; - gpiop->PUPDR = config->pupdr; - gpiop->ODR = config->odr; - gpiop->AFRL = config->afrl; - gpiop->AFRH = config->afrh; - gpiop->MODER = config->moder; -} - -static void stm32_gpio_init(void) { - /* Enabling GPIO-related clocks, the mask comes from the - registry header file.*/ - rccResetAHB1(STM32_GPIO_EN_MASK); - rccEnableAHB1(STM32_GPIO_EN_MASK, true); - - /* Initializing all the defined GPIO ports.*/ -#if STM32_HAS_GPIOA - gpio_init(GPIOA, &gpio_default_config.PAData); -#endif -#if STM32_HAS_GPIOB - gpio_init(GPIOB, &gpio_default_config.PBData); -#endif -#if STM32_HAS_GPIOC - gpio_init(GPIOC, &gpio_default_config.PCData); -#endif -#if STM32_HAS_GPIOD - gpio_init(GPIOD, &gpio_default_config.PDData); -#endif -#if STM32_HAS_GPIOE - gpio_init(GPIOE, &gpio_default_config.PEData); -#endif -#if STM32_HAS_GPIOF - gpio_init(GPIOF, &gpio_default_config.PFData); -#endif -#if STM32_HAS_GPIOG - gpio_init(GPIOG, &gpio_default_config.PGData); -#endif -#if STM32_HAS_GPIOH - gpio_init(GPIOH, &gpio_default_config.PHData); -#endif -#if STM32_HAS_GPIOI - gpio_init(GPIOI, &gpio_default_config.PIData); -#endif -#if STM32_HAS_GPIOJ - gpio_init(GPIOJ, &gpio_default_config.PJData); -#endif -#if STM32_HAS_GPIOK - gpio_init(GPIOK, &gpio_default_config.PKData); -#endif -} - -/*===========================================================================*/ -/* Driver interrupt handlers. */ -/*===========================================================================*/ - -/*===========================================================================*/ -/* Driver exported functions. */ -/*===========================================================================*/ - -__attribute__((weak)) void enter_bootloader_mode_if_requested(void) {} - -/** - * @brief Early initialization code. - * @details GPIO ports and system clocks are initialized before everything - * else. - */ -void __early_init(void) { - enter_bootloader_mode_if_requested(); - - stm32_gpio_init(); - stm32_clock_init(); -} - -#if HAL_USE_SDC || defined(__DOXYGEN__) -/** - * @brief SDC card detection. - */ -bool sdc_lld_is_card_inserted(SDCDriver *sdcp) { - (void)sdcp; - /* TODO: Fill the implementation.*/ - return true; -} - -/** - * @brief SDC card write protection detection. - */ -bool sdc_lld_is_write_protected(SDCDriver *sdcp) { - (void)sdcp; - /* TODO: Fill the implementation.*/ - return false; -} -#endif /* HAL_USE_SDC */ - -#if HAL_USE_MMC_SPI || defined(__DOXYGEN__) -/** - * @brief MMC_SPI card detection. - */ -bool mmc_lld_is_card_inserted(MMCDriver *mmcp) { - (void)mmcp; - /* TODO: Fill the implementation.*/ - return true; -} - -/** - * @brief MMC_SPI card write protection detection. - */ -bool mmc_lld_is_write_protected(MMCDriver *mmcp) { - (void)mmcp; - /* TODO: Fill the implementation.*/ - return false; -} -#endif - -/** - * @brief Board-specific initialization code. - * @todo Add your board-specific code, if any. - */ -void boardInit(void) {} diff --git a/drivers/boards/BLACKPILL_STM32_F401/board.h b/drivers/boards/BLACKPILL_STM32_F401/board.h deleted file mode 100644 index 2d1cd9ff72..0000000000 --- a/drivers/boards/BLACKPILL_STM32_F401/board.h +++ /dev/null @@ -1,568 +0,0 @@ -/* - ChibiOS - Copyright (C) 2006..2018 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/* - * This file has been automatically generated using ChibiStudio board - * generator plugin. Do not edit manually. - */ - -#ifndef BOARD_H -#define BOARD_H - -/*===========================================================================*/ -/* Driver constants. */ -/*===========================================================================*/ - -/* - * Setup for STM32F401CCU6 black pill board. - */ - -/* - * Board identifier. - */ -#define BOARD_BLACKPILL_STM32_F401 -#define BOARD_NAME "STM32F401CCU6 blackpill" - -/* - * Allow Board to boot USB without extra A9 hardware/software config - */ -#define BOARD_OTG_NOVBUSSENS 1 - -/* - * Board oscillators-related settings. - */ -#if !defined(STM32_LSECLK) -# define STM32_LSECLK 32768U -#endif - -#if !defined(STM32_HSECLK) -# define STM32_HSECLK 25000000U -#endif - -/* - * Board voltages. - * Required for performance limits calculation. - */ -#define STM32_VDD 300U - -/* - * MCU type as defined in the ST header. - */ -#define STM32F401xC - -/* - * IO pins assignments. - */ -#define GPIOA_BUTTON 0U -#define GPIOA_PIN1 1U -#define GPIOA_PIN2 2U -#define GPIOA_PIN3 3U -#define GPIOA_CS43L22_LRCK 4U -#define GPIOA_L3GD20_SCL 5U -#define GPIOA_L3GD20_SD0 6U -#define GPIOA_L3GD20_SDI 7U -#define GPIOA_PIN8 8U -#define GPIOA_VBUS_FS 9U -#define GPIOA_OTG_FS_ID 10U -#define GPIOA_OTG_FS_DM 11U -#define GPIOA_OTG_FS_DP 12U -#define GPIOA_SWDIO 13U -#define GPIOA_SWCLK 14U -#define GPIOA_PIN15 15U - -#define GPIOB_PIN0 0U -#define GPIOB_PIN1 1U -#define GPIOB_PIN2 2U -#define GPIOB_SWO 3U -#define GPIOB_PIN4 4U -#define GPIOB_PIN5 5U -#define GPIOB_LSM303DLHC_SCL 6U -#define GPIOB_PIN7 7U -#define GPIOB_PIN8 8U -#define GPIOB_LSM303DLHC_SDA 9U -#define GPIOB_MP45DT02_CLK_IN 10U -#define GPIOB_PIN11 11U -#define GPIOB_PIN12 12U -#define GPIOB_PIN13 13U -#define GPIOB_PIN14 14U -#define GPIOB_PIN15 15U - -#define GPIOC_OTG_FS_POWER_ON 0U -#define GPIOC_PIN1 1U -#define GPIOC_PIN2 2U -#define GPIOC_CS43L22_AIN4x 3U -#define GPIOC_MP45DT02_PDM_OUT 3U -#define GPIOC_PIN4 4U -#define GPIOC_PIN5 5U -#define GPIOC_PIN6 6U -#define GPIOC_CS43L22_MCLK 7U -#define GPIOC_PIN8 8U -#define GPIOC_PIN9 9U -#define GPIOC_CS43L22_SCLK 10U -#define GPIOC_PIN11 11U -#define GPIOC_CS43L22_SDIN 12U -#define GPIOC_PIN13 13U -#define GPIOC_OSC32_IN 14U -#define GPIOC_OSC32_OUT 15U - -#define GPIOD_PIN0 0U -#define GPIOD_PIN1 1U -#define GPIOD_PIN2 2U -#define GPIOD_PIN3 3U -#define GPIOD_CS43L22_RESET 4U -#define GPIOD_OverCurrent 5U -#define GPIOD_PIN6 6U -#define GPIOD_PIN7 7U -#define GPIOD_PIN8 8U -#define GPIOD_PIN9 9U -#define GPIOD_PIN10 10U -#define GPIOD_PIN11 11U -#define GPIOD_LED4 12U -#define GPIOD_LED3 13U -#define GPIOD_LED5 14U -#define GPIOD_LED6 15U - -#define GPIOE_L3GD20_INT1 0U -#define GPIOE_L3GD20_INT2 1U -#define GPIOE_LSM303DLHC_DRDY 2U -#define GPIOE_L3GD20_CS 3U -#define GPIOE_LSM303DLHC_INT1 4U -#define GPIOE_LSM303DLHC_INT2 5U -#define GPIOE_PIN6 6U -#define GPIOE_PIN7 7U -#define GPIOE_PIN8 8U -#define GPIOE_PIN9 9U -#define GPIOE_PIN10 10U -#define GPIOE_PIN11 11U -#define GPIOE_PIN12 12U -#define GPIOE_PIN13 13U -#define GPIOE_PIN14 14U -#define GPIOE_PIN15 15U - -#define GPIOF_PIN0 0U -#define GPIOF_PIN1 1U -#define GPIOF_PIN2 2U -#define GPIOF_PIN3 3U -#define GPIOF_PIN4 4U -#define GPIOF_PIN5 5U -#define GPIOF_PIN6 6U -#define GPIOF_PIN7 7U -#define GPIOF_PIN8 8U -#define GPIOF_PIN9 9U -#define GPIOF_PIN10 10U -#define GPIOF_PIN11 11U -#define GPIOF_PIN12 12U -#define GPIOF_PIN13 13U -#define GPIOF_PIN14 14U -#define GPIOF_PIN15 15U - -#define GPIOG_PIN0 0U -#define GPIOG_PIN1 1U -#define GPIOG_PIN2 2U -#define GPIOG_PIN3 3U -#define GPIOG_PIN4 4U -#define GPIOG_PIN5 5U -#define GPIOG_PIN6 6U -#define GPIOG_PIN7 7U -#define GPIOG_PIN8 8U -#define GPIOG_PIN9 9U -#define GPIOG_PIN10 10U -#define GPIOG_PIN11 11U -#define GPIOG_PIN12 12U -#define GPIOG_PIN13 13U -#define GPIOG_PIN14 14U -#define GPIOG_PIN15 15U - -#define GPIOH_OSC_IN 0U -#define GPIOH_OSC_OUT 1U -#define GPIOH_PIN2 2U -#define GPIOH_PIN3 3U -#define GPIOH_PIN4 4U -#define GPIOH_PIN5 5U -#define GPIOH_PIN6 6U -#define GPIOH_PIN7 7U -#define GPIOH_PIN8 8U -#define GPIOH_PIN9 9U -#define GPIOH_PIN10 10U -#define GPIOH_PIN11 11U -#define GPIOH_PIN12 12U -#define GPIOH_PIN13 13U -#define GPIOH_PIN14 14U -#define GPIOH_PIN15 15U - -#define GPIOI_PIN0 0U -#define GPIOI_PIN1 1U -#define GPIOI_PIN2 2U -#define GPIOI_PIN3 3U -#define GPIOI_PIN4 4U -#define GPIOI_PIN5 5U -#define GPIOI_PIN6 6U -#define GPIOI_PIN7 7U -#define GPIOI_PIN8 8U -#define GPIOI_PIN9 9U -#define GPIOI_PIN10 10U -#define GPIOI_PIN11 11U -#define GPIOI_PIN12 12U -#define GPIOI_PIN13 13U -#define GPIOI_PIN14 14U -#define GPIOI_PIN15 15U - -/* - * IO lines assignments. - */ -#define LINE_BUTTON PAL_LINE(GPIOA, 0U) -#define LINE_CS43L22_LRCK PAL_LINE(GPIOA, 4U) -#define LINE_L3GD20_SCL PAL_LINE(GPIOA, 5U) -#define LINE_L3GD20_SD0 PAL_LINE(GPIOA, 6U) -#define LINE_L3GD20_SDI PAL_LINE(GPIOA, 7U) -#define LINE_VBUS_FS PAL_LINE(GPIOA, 9U) -#define LINE_OTG_FS_ID PAL_LINE(GPIOA, 10U) -#define LINE_OTG_FS_DM PAL_LINE(GPIOA, 11U) -#define LINE_OTG_FS_DP PAL_LINE(GPIOA, 12U) -#define LINE_SWDIO PAL_LINE(GPIOA, 13U) -#define LINE_SWCLK PAL_LINE(GPIOA, 14U) -#define LINE_SWO PAL_LINE(GPIOB, 3U) -#define LINE_LSM303DLHC_SCL PAL_LINE(GPIOB, 6U) -#define LINE_LSM303DLHC_SDA PAL_LINE(GPIOB, 9U) -#define LINE_MP45DT02_CLK_IN PAL_LINE(GPIOB, 10U) -#define LINE_OTG_FS_POWER_ON PAL_LINE(GPIOC, 0U) -#define LINE_CS43L22_AIN4x PAL_LINE(GPIOC, 3U) -#define LINE_MP45DT02_PDM_OUT PAL_LINE(GPIOC, 3U) -#define LINE_CS43L22_MCLK PAL_LINE(GPIOC, 7U) -#define LINE_CS43L22_SCLK PAL_LINE(GPIOC, 10U) -#define LINE_CS43L22_SDIN PAL_LINE(GPIOC, 12U) -#define LINE_OSC32_IN PAL_LINE(GPIOC, 14U) -#define LINE_OSC32_OUT PAL_LINE(GPIOC, 15U) -#define LINE_CS43L22_RESET PAL_LINE(GPIOD, 4U) -#define LINE_OverCurrent PAL_LINE(GPIOD, 5U) -#define LINE_LED4 PAL_LINE(GPIOD, 12U) -#define LINE_LED3 PAL_LINE(GPIOD, 13U) -#define LINE_LED5 PAL_LINE(GPIOD, 14U) -#define LINE_LED6 PAL_LINE(GPIOD, 15U) -#define LINE_L3GD20_INT1 PAL_LINE(GPIOE, 0U) -#define LINE_L3GD20_INT2 PAL_LINE(GPIOE, 1U) -#define LINE_LSM303DLHC_DRDY PAL_LINE(GPIOE, 2U) -#define LINE_L3GD20_CS PAL_LINE(GPIOE, 3U) -#define LINE_LSM303DLHC_INT1 PAL_LINE(GPIOE, 4U) -#define LINE_LSM303DLHC_INT2 PAL_LINE(GPIOE, 5U) -#define LINE_OSC_IN PAL_LINE(GPIOH, 0U) -#define LINE_OSC_OUT PAL_LINE(GPIOH, 1U) - -/*===========================================================================*/ -/* Driver pre-compile time settings. */ -/*===========================================================================*/ - -/*===========================================================================*/ -/* Derived constants and error checks. */ -/*===========================================================================*/ - -/*===========================================================================*/ -/* Driver data structures and types. */ -/*===========================================================================*/ - -/*===========================================================================*/ -/* Driver macros. */ -/*===========================================================================*/ - -/* - * I/O ports initial setup, this configuration is established soon after reset - * in the initialization code. - * Please refer to the STM32 Reference Manual for details. - */ -#define PIN_MODE_INPUT(n) (0U << ((n)*2U)) -#define PIN_MODE_OUTPUT(n) (1U << ((n)*2U)) -#define PIN_MODE_ALTERNATE(n) (2U << ((n)*2U)) -#define PIN_MODE_ANALOG(n) (3U << ((n)*2U)) -#define PIN_ODR_LOW(n) (0U << (n)) -#define PIN_ODR_HIGH(n) (1U << (n)) -#define PIN_OTYPE_PUSHPULL(n) (0U << (n)) -#define PIN_OTYPE_OPENDRAIN(n) (1U << (n)) -#define PIN_OSPEED_VERYLOW(n) (0U << ((n)*2U)) -#define PIN_OSPEED_LOW(n) (1U << ((n)*2U)) -#define PIN_OSPEED_MEDIUM(n) (2U << ((n)*2U)) -#define PIN_OSPEED_HIGH(n) (3U << ((n)*2U)) -#define PIN_PUPDR_FLOATING(n) (0U << ((n)*2U)) -#define PIN_PUPDR_PULLUP(n) (1U << ((n)*2U)) -#define PIN_PUPDR_PULLDOWN(n) (2U << ((n)*2U)) -#define PIN_AFIO_AF(n, v) ((v) << (((n) % 8U) * 4U)) - -/* - * GPIOA setup: - * - * PA0 - BUTTON (input floating). - * PA1 - PIN1 (input pullup). - * PA2 - PIN2 (input pullup). - * PA3 - PIN3 (input pullup). - * PA4 - CS43L22_LRCK (alternate 6). - * PA5 - L3GD20_SCL (alternate 5). - * PA6 - L3GD20_SD0 (alternate 5). - * PA7 - L3GD20_SDI (alternate 5). - * PA8 - PIN8 (input pullup). - * PA9 - VBUS_FS (input floating). - * PA10 - OTG_FS_ID (alternate 10). - * PA11 - OTG_FS_DM (alternate 10). - * PA12 - OTG_FS_DP (alternate 10). - * PA13 - SWDIO (alternate 0). - * PA14 - SWCLK (alternate 0). - * PA15 - PIN15 (input pullup). - */ -#define VAL_GPIOA_MODER (PIN_MODE_INPUT(GPIOA_BUTTON) | PIN_MODE_INPUT(GPIOA_PIN1) | PIN_MODE_INPUT(GPIOA_PIN2) | PIN_MODE_INPUT(GPIOA_PIN3) | PIN_MODE_ALTERNATE(GPIOA_CS43L22_LRCK) | PIN_MODE_ALTERNATE(GPIOA_L3GD20_SCL) | PIN_MODE_ALTERNATE(GPIOA_L3GD20_SD0) | PIN_MODE_ALTERNATE(GPIOA_L3GD20_SDI) | PIN_MODE_INPUT(GPIOA_PIN8) | PIN_MODE_INPUT(GPIOA_VBUS_FS) | PIN_MODE_ALTERNATE(GPIOA_OTG_FS_ID) | PIN_MODE_ALTERNATE(GPIOA_OTG_FS_DM) | PIN_MODE_ALTERNATE(GPIOA_OTG_FS_DP) | PIN_MODE_ALTERNATE(GPIOA_SWDIO) | PIN_MODE_ALTERNATE(GPIOA_SWCLK) | PIN_MODE_INPUT(GPIOA_PIN15)) -#define VAL_GPIOA_OTYPER (PIN_OTYPE_PUSHPULL(GPIOA_BUTTON) | PIN_OTYPE_PUSHPULL(GPIOA_PIN1) | PIN_OTYPE_PUSHPULL(GPIOA_PIN2) | PIN_OTYPE_PUSHPULL(GPIOA_PIN3) | PIN_OTYPE_PUSHPULL(GPIOA_CS43L22_LRCK) | PIN_OTYPE_PUSHPULL(GPIOA_L3GD20_SCL) | PIN_OTYPE_PUSHPULL(GPIOA_L3GD20_SD0) | PIN_OTYPE_PUSHPULL(GPIOA_L3GD20_SDI) | PIN_OTYPE_PUSHPULL(GPIOA_PIN8) | PIN_OTYPE_PUSHPULL(GPIOA_VBUS_FS) | PIN_OTYPE_PUSHPULL(GPIOA_OTG_FS_ID) | PIN_OTYPE_PUSHPULL(GPIOA_OTG_FS_DM) | PIN_OTYPE_PUSHPULL(GPIOA_OTG_FS_DP) | PIN_OTYPE_PUSHPULL(GPIOA_SWDIO) | PIN_OTYPE_PUSHPULL(GPIOA_SWCLK) | PIN_OTYPE_PUSHPULL(GPIOA_PIN15)) -#define VAL_GPIOA_OSPEEDR (PIN_OSPEED_HIGH(GPIOA_BUTTON) | PIN_OSPEED_HIGH(GPIOA_PIN1) | PIN_OSPEED_HIGH(GPIOA_PIN2) | PIN_OSPEED_HIGH(GPIOA_PIN3) | PIN_OSPEED_HIGH(GPIOA_CS43L22_LRCK) | PIN_OSPEED_HIGH(GPIOA_L3GD20_SCL) | PIN_OSPEED_HIGH(GPIOA_L3GD20_SD0) | PIN_OSPEED_HIGH(GPIOA_L3GD20_SDI) | PIN_OSPEED_HIGH(GPIOA_PIN8) | PIN_OSPEED_HIGH(GPIOA_VBUS_FS) | PIN_OSPEED_HIGH(GPIOA_OTG_FS_ID) | PIN_OSPEED_HIGH(GPIOA_OTG_FS_DM) | PIN_OSPEED_HIGH(GPIOA_OTG_FS_DP) | PIN_OSPEED_HIGH(GPIOA_SWDIO) | PIN_OSPEED_HIGH(GPIOA_SWCLK) | PIN_OSPEED_HIGH(GPIOA_PIN15)) -#define VAL_GPIOA_PUPDR (PIN_PUPDR_FLOATING(GPIOA_BUTTON) | PIN_PUPDR_PULLUP(GPIOA_PIN1) | PIN_PUPDR_PULLUP(GPIOA_PIN2) | PIN_PUPDR_PULLUP(GPIOA_PIN3) | PIN_PUPDR_FLOATING(GPIOA_CS43L22_LRCK) | PIN_PUPDR_FLOATING(GPIOA_L3GD20_SCL) | PIN_PUPDR_PULLUP(GPIOA_L3GD20_SD0) | PIN_PUPDR_PULLUP(GPIOA_L3GD20_SDI) | PIN_PUPDR_PULLUP(GPIOA_PIN8) | PIN_PUPDR_FLOATING(GPIOA_VBUS_FS) | PIN_PUPDR_FLOATING(GPIOA_OTG_FS_ID) | PIN_PUPDR_FLOATING(GPIOA_OTG_FS_DM) | PIN_PUPDR_FLOATING(GPIOA_OTG_FS_DP) | PIN_PUPDR_FLOATING(GPIOA_SWDIO) | PIN_PUPDR_FLOATING(GPIOA_SWCLK) | PIN_PUPDR_PULLUP(GPIOA_PIN15)) -#define VAL_GPIOA_ODR (PIN_ODR_HIGH(GPIOA_BUTTON) | PIN_ODR_HIGH(GPIOA_PIN1) | PIN_ODR_HIGH(GPIOA_PIN2) | PIN_ODR_HIGH(GPIOA_PIN3) | PIN_ODR_HIGH(GPIOA_CS43L22_LRCK) | PIN_ODR_HIGH(GPIOA_L3GD20_SCL) | PIN_ODR_HIGH(GPIOA_L3GD20_SD0) | PIN_ODR_HIGH(GPIOA_L3GD20_SDI) | PIN_ODR_HIGH(GPIOA_PIN8) | PIN_ODR_HIGH(GPIOA_VBUS_FS) | PIN_ODR_HIGH(GPIOA_OTG_FS_ID) | PIN_ODR_HIGH(GPIOA_OTG_FS_DM) | PIN_ODR_HIGH(GPIOA_OTG_FS_DP) | PIN_ODR_HIGH(GPIOA_SWDIO) | PIN_ODR_HIGH(GPIOA_SWCLK) | PIN_ODR_HIGH(GPIOA_PIN15)) -#define VAL_GPIOA_AFRL (PIN_AFIO_AF(GPIOA_BUTTON, 0U) | PIN_AFIO_AF(GPIOA_PIN1, 0U) | PIN_AFIO_AF(GPIOA_PIN2, 0U) | PIN_AFIO_AF(GPIOA_PIN3, 0U) | PIN_AFIO_AF(GPIOA_CS43L22_LRCK, 6U) | PIN_AFIO_AF(GPIOA_L3GD20_SCL, 5U) | PIN_AFIO_AF(GPIOA_L3GD20_SD0, 5U) | PIN_AFIO_AF(GPIOA_L3GD20_SDI, 5U)) -#define VAL_GPIOA_AFRH (PIN_AFIO_AF(GPIOA_PIN8, 0U) | PIN_AFIO_AF(GPIOA_VBUS_FS, 0U) | PIN_AFIO_AF(GPIOA_OTG_FS_ID, 10U) | PIN_AFIO_AF(GPIOA_OTG_FS_DM, 10U) | PIN_AFIO_AF(GPIOA_OTG_FS_DP, 10U) | PIN_AFIO_AF(GPIOA_SWDIO, 0U) | PIN_AFIO_AF(GPIOA_SWCLK, 0U) | PIN_AFIO_AF(GPIOA_PIN15, 0U)) - -/* - * GPIOB setup: - * - * PB0 - PIN0 (input pullup). - * PB1 - PIN1 (input pullup). - * PB2 - PIN2 (input pullup). - * PB3 - SWO (alternate 0). - * PB4 - PIN4 (input pullup). - * PB5 - PIN5 (input pullup). - * PB6 - LSM303DLHC_SCL (alternate 4). - * PB7 - PIN7 (input pullup). - * PB8 - PIN8 (input pullup). - * PB9 - LSM303DLHC_SDA (alternate 4). - * PB10 - MP45DT02_CLK_IN (alternate 5). - * PB11 - PIN11 (input pullup). - * PB12 - PIN12 (input pullup). - * PB13 - PIN13 (input pullup). - * PB14 - PIN14 (input pullup). - * PB15 - PIN15 (input pullup). - */ -#define VAL_GPIOB_MODER (PIN_MODE_INPUT(GPIOB_PIN0) | PIN_MODE_INPUT(GPIOB_PIN1) | PIN_MODE_INPUT(GPIOB_PIN2) | PIN_MODE_ALTERNATE(GPIOB_SWO) | PIN_MODE_INPUT(GPIOB_PIN4) | PIN_MODE_INPUT(GPIOB_PIN5) | PIN_MODE_ALTERNATE(GPIOB_LSM303DLHC_SCL) | PIN_MODE_INPUT(GPIOB_PIN7) | PIN_MODE_INPUT(GPIOB_PIN8) | PIN_MODE_ALTERNATE(GPIOB_LSM303DLHC_SDA) | PIN_MODE_ALTERNATE(GPIOB_MP45DT02_CLK_IN) | PIN_MODE_INPUT(GPIOB_PIN11) | PIN_MODE_INPUT(GPIOB_PIN12) | PIN_MODE_INPUT(GPIOB_PIN13) | PIN_MODE_INPUT(GPIOB_PIN14) | PIN_MODE_INPUT(GPIOB_PIN15)) -#define VAL_GPIOB_OTYPER (PIN_OTYPE_PUSHPULL(GPIOB_PIN0) | PIN_OTYPE_PUSHPULL(GPIOB_PIN1) | PIN_OTYPE_PUSHPULL(GPIOB_PIN2) | PIN_OTYPE_PUSHPULL(GPIOB_SWO) | PIN_OTYPE_PUSHPULL(GPIOB_PIN4) | PIN_OTYPE_PUSHPULL(GPIOB_PIN5) | PIN_OTYPE_PUSHPULL(GPIOB_LSM303DLHC_SCL) | PIN_OTYPE_PUSHPULL(GPIOB_PIN7) | PIN_OTYPE_PUSHPULL(GPIOB_PIN8) | PIN_OTYPE_PUSHPULL(GPIOB_LSM303DLHC_SDA) | PIN_OTYPE_PUSHPULL(GPIOB_MP45DT02_CLK_IN) | PIN_OTYPE_PUSHPULL(GPIOB_PIN11) | PIN_OTYPE_PUSHPULL(GPIOB_PIN12) | PIN_OTYPE_PUSHPULL(GPIOB_PIN13) | PIN_OTYPE_PUSHPULL(GPIOB_PIN14) | PIN_OTYPE_PUSHPULL(GPIOB_PIN15)) -#define VAL_GPIOB_OSPEEDR (PIN_OSPEED_HIGH(GPIOB_PIN0) | PIN_OSPEED_HIGH(GPIOB_PIN1) | PIN_OSPEED_HIGH(GPIOB_PIN2) | PIN_OSPEED_HIGH(GPIOB_SWO) | PIN_OSPEED_HIGH(GPIOB_PIN4) | PIN_OSPEED_HIGH(GPIOB_PIN5) | PIN_OSPEED_HIGH(GPIOB_LSM303DLHC_SCL) | PIN_OSPEED_HIGH(GPIOB_PIN7) | PIN_OSPEED_HIGH(GPIOB_PIN8) | PIN_OSPEED_HIGH(GPIOB_LSM303DLHC_SDA) | PIN_OSPEED_HIGH(GPIOB_MP45DT02_CLK_IN) | PIN_OSPEED_HIGH(GPIOB_PIN11) | PIN_OSPEED_HIGH(GPIOB_PIN12) | PIN_OSPEED_HIGH(GPIOB_PIN13) | PIN_OSPEED_HIGH(GPIOB_PIN14) | PIN_OSPEED_HIGH(GPIOB_PIN15)) -#define VAL_GPIOB_PUPDR (PIN_PUPDR_PULLUP(GPIOB_PIN0) | PIN_PUPDR_PULLUP(GPIOB_PIN1) | PIN_PUPDR_PULLUP(GPIOB_PIN2) | PIN_PUPDR_PULLUP(GPIOB_SWO) | PIN_PUPDR_PULLUP(GPIOB_PIN4) | PIN_PUPDR_PULLUP(GPIOB_PIN5) | PIN_PUPDR_FLOATING(GPIOB_LSM303DLHC_SCL) | PIN_PUPDR_PULLUP(GPIOB_PIN7) | PIN_PUPDR_PULLUP(GPIOB_PIN8) | PIN_PUPDR_FLOATING(GPIOB_LSM303DLHC_SDA) | PIN_PUPDR_FLOATING(GPIOB_MP45DT02_CLK_IN) | PIN_PUPDR_PULLUP(GPIOB_PIN11) | PIN_PUPDR_PULLUP(GPIOB_PIN12) | PIN_PUPDR_PULLUP(GPIOB_PIN13) | PIN_PUPDR_PULLUP(GPIOB_PIN14) | PIN_PUPDR_PULLUP(GPIOB_PIN15)) -#define VAL_GPIOB_ODR (PIN_ODR_HIGH(GPIOB_PIN0) | PIN_ODR_HIGH(GPIOB_PIN1) | PIN_ODR_HIGH(GPIOB_PIN2) | PIN_ODR_HIGH(GPIOB_SWO) | PIN_ODR_HIGH(GPIOB_PIN4) | PIN_ODR_HIGH(GPIOB_PIN5) | PIN_ODR_HIGH(GPIOB_LSM303DLHC_SCL) | PIN_ODR_HIGH(GPIOB_PIN7) | PIN_ODR_HIGH(GPIOB_PIN8) | PIN_ODR_HIGH(GPIOB_LSM303DLHC_SDA) | PIN_ODR_HIGH(GPIOB_MP45DT02_CLK_IN) | PIN_ODR_HIGH(GPIOB_PIN11) | PIN_ODR_HIGH(GPIOB_PIN12) | PIN_ODR_HIGH(GPIOB_PIN13) | PIN_ODR_HIGH(GPIOB_PIN14) | PIN_ODR_HIGH(GPIOB_PIN15)) -#define VAL_GPIOB_AFRL (PIN_AFIO_AF(GPIOB_PIN0, 0U) | PIN_AFIO_AF(GPIOB_PIN1, 0U) | PIN_AFIO_AF(GPIOB_PIN2, 0U) | PIN_AFIO_AF(GPIOB_SWO, 0U) | PIN_AFIO_AF(GPIOB_PIN4, 0U) | PIN_AFIO_AF(GPIOB_PIN5, 0U) | PIN_AFIO_AF(GPIOB_LSM303DLHC_SCL, 4U) | PIN_AFIO_AF(GPIOB_PIN7, 0U)) -#define VAL_GPIOB_AFRH (PIN_AFIO_AF(GPIOB_PIN8, 0U) | PIN_AFIO_AF(GPIOB_LSM303DLHC_SDA, 4U) | PIN_AFIO_AF(GPIOB_MP45DT02_CLK_IN, 5U) | PIN_AFIO_AF(GPIOB_PIN11, 0U) | PIN_AFIO_AF(GPIOB_PIN12, 0U) | PIN_AFIO_AF(GPIOB_PIN13, 0U) | PIN_AFIO_AF(GPIOB_PIN14, 0U) | PIN_AFIO_AF(GPIOB_PIN15, 0U)) - -/* - * GPIOC setup: - * - * PC0 - OTG_FS_POWER_ON (output pushpull maximum). - * PC1 - PIN1 (input pullup). - * PC2 - PIN2 (input pullup). - * PC3 - CS43L22_AIN4x MP45DT02_PDM_OUT(alternate 5). - * PC4 - PIN4 (input pullup). - * PC5 - PIN5 (input pullup). - * PC6 - PIN6 (input pullup). - * PC7 - CS43L22_MCLK (alternate 6). - * PC8 - PIN8 (input pullup). - * PC9 - PIN9 (input pullup). - * PC10 - CS43L22_SCLK (alternate 6). - * PC11 - PIN11 (input pullup). - * PC12 - CS43L22_SDIN (alternate 6). - * PC13 - PIN13 (input pullup). - * PC14 - OSC32_IN (input floating). - * PC15 - OSC32_OUT (input floating). - */ -#define VAL_GPIOC_MODER (PIN_MODE_OUTPUT(GPIOC_OTG_FS_POWER_ON) | PIN_MODE_INPUT(GPIOC_PIN1) | PIN_MODE_INPUT(GPIOC_PIN2) | PIN_MODE_ALTERNATE(GPIOC_CS43L22_AIN4x) | PIN_MODE_INPUT(GPIOC_PIN4) | PIN_MODE_INPUT(GPIOC_PIN5) | PIN_MODE_INPUT(GPIOC_PIN6) | PIN_MODE_ALTERNATE(GPIOC_CS43L22_MCLK) | PIN_MODE_INPUT(GPIOC_PIN8) | PIN_MODE_INPUT(GPIOC_PIN9) | PIN_MODE_ALTERNATE(GPIOC_CS43L22_SCLK) | PIN_MODE_INPUT(GPIOC_PIN11) | PIN_MODE_ALTERNATE(GPIOC_CS43L22_SDIN) | PIN_MODE_INPUT(GPIOC_PIN13) | PIN_MODE_INPUT(GPIOC_OSC32_IN) | PIN_MODE_INPUT(GPIOC_OSC32_OUT)) -#define VAL_GPIOC_OTYPER (PIN_OTYPE_PUSHPULL(GPIOC_OTG_FS_POWER_ON) | PIN_OTYPE_PUSHPULL(GPIOC_PIN1) | PIN_OTYPE_PUSHPULL(GPIOC_PIN2) | PIN_OTYPE_PUSHPULL(GPIOC_CS43L22_AIN4x) | PIN_OTYPE_PUSHPULL(GPIOC_PIN4) | PIN_OTYPE_PUSHPULL(GPIOC_PIN5) | PIN_OTYPE_PUSHPULL(GPIOC_PIN6) | PIN_OTYPE_PUSHPULL(GPIOC_CS43L22_MCLK) | PIN_OTYPE_PUSHPULL(GPIOC_PIN8) | PIN_OTYPE_PUSHPULL(GPIOC_PIN9) | PIN_OTYPE_PUSHPULL(GPIOC_CS43L22_SCLK) | PIN_OTYPE_PUSHPULL(GPIOC_PIN11) | PIN_OTYPE_PUSHPULL(GPIOC_CS43L22_SDIN) | PIN_OTYPE_PUSHPULL(GPIOC_PIN13) | PIN_OTYPE_PUSHPULL(GPIOC_OSC32_IN) | PIN_OTYPE_PUSHPULL(GPIOC_OSC32_OUT)) -#define VAL_GPIOC_OSPEEDR (PIN_OSPEED_HIGH(GPIOC_OTG_FS_POWER_ON) | PIN_OSPEED_HIGH(GPIOC_PIN1) | PIN_OSPEED_HIGH(GPIOC_PIN2) | PIN_OSPEED_HIGH(GPIOC_CS43L22_AIN4x) | PIN_OSPEED_HIGH(GPIOC_PIN4) | PIN_OSPEED_HIGH(GPIOC_PIN5) | PIN_OSPEED_HIGH(GPIOC_PIN6) | PIN_OSPEED_HIGH(GPIOC_CS43L22_MCLK) | PIN_OSPEED_HIGH(GPIOC_PIN8) | PIN_OSPEED_HIGH(GPIOC_PIN9) | PIN_OSPEED_HIGH(GPIOC_CS43L22_SCLK) | PIN_OSPEED_HIGH(GPIOC_PIN11) | PIN_OSPEED_HIGH(GPIOC_CS43L22_SDIN) | PIN_OSPEED_HIGH(GPIOC_PIN13) | PIN_OSPEED_HIGH(GPIOC_OSC32_IN) | PIN_OSPEED_HIGH(GPIOC_OSC32_OUT)) -#define VAL_GPIOC_PUPDR (PIN_PUPDR_PULLUP(GPIOC_OTG_FS_POWER_ON) | PIN_PUPDR_PULLUP(GPIOC_PIN1) | PIN_PUPDR_PULLUP(GPIOC_PIN2) | PIN_PUPDR_FLOATING(GPIOC_CS43L22_AIN4x) | PIN_PUPDR_PULLUP(GPIOC_PIN4) | PIN_PUPDR_PULLUP(GPIOC_PIN5) | PIN_PUPDR_PULLUP(GPIOC_PIN6) | PIN_PUPDR_PULLUP(GPIOC_CS43L22_MCLK) | PIN_PUPDR_PULLUP(GPIOC_PIN8) | PIN_PUPDR_PULLUP(GPIOC_PIN9) | PIN_PUPDR_PULLUP(GPIOC_CS43L22_SCLK) | PIN_PUPDR_PULLUP(GPIOC_PIN11) | PIN_PUPDR_PULLUP(GPIOC_CS43L22_SDIN) | PIN_PUPDR_PULLUP(GPIOC_PIN13) | PIN_PUPDR_FLOATING(GPIOC_OSC32_IN) | PIN_PUPDR_FLOATING(GPIOC_OSC32_OUT)) -#define VAL_GPIOC_ODR (PIN_ODR_HIGH(GPIOC_OTG_FS_POWER_ON) | PIN_ODR_HIGH(GPIOC_PIN1) | PIN_ODR_HIGH(GPIOC_PIN2) | PIN_ODR_HIGH(GPIOC_CS43L22_AIN4x) | PIN_ODR_HIGH(GPIOC_PIN4) | PIN_ODR_HIGH(GPIOC_PIN5) | PIN_ODR_HIGH(GPIOC_PIN6) | PIN_ODR_HIGH(GPIOC_CS43L22_MCLK) | PIN_ODR_HIGH(GPIOC_PIN8) | PIN_ODR_HIGH(GPIOC_PIN9) | PIN_ODR_HIGH(GPIOC_CS43L22_SCLK) | PIN_ODR_HIGH(GPIOC_PIN11) | PIN_ODR_HIGH(GPIOC_CS43L22_SDIN) | PIN_ODR_HIGH(GPIOC_PIN13) | PIN_ODR_HIGH(GPIOC_OSC32_IN) | PIN_ODR_HIGH(GPIOC_OSC32_OUT)) -#define VAL_GPIOC_AFRL (PIN_AFIO_AF(GPIOC_OTG_FS_POWER_ON, 0U) | PIN_AFIO_AF(GPIOC_PIN1, 0U) | PIN_AFIO_AF(GPIOC_PIN2, 0U) | PIN_AFIO_AF(GPIOC_CS43L22_AIN4x, 5U) | PIN_AFIO_AF(GPIOC_PIN4, 0U) | PIN_AFIO_AF(GPIOC_PIN5, 0U) | PIN_AFIO_AF(GPIOC_PIN6, 0U) | PIN_AFIO_AF(GPIOC_CS43L22_MCLK, 6U)) -#define VAL_GPIOC_AFRH (PIN_AFIO_AF(GPIOC_PIN8, 0U) | PIN_AFIO_AF(GPIOC_PIN9, 0U) | PIN_AFIO_AF(GPIOC_CS43L22_SCLK, 6U) | PIN_AFIO_AF(GPIOC_PIN11, 0U) | PIN_AFIO_AF(GPIOC_CS43L22_SDIN, 6U) | PIN_AFIO_AF(GPIOC_PIN13, 0U) | PIN_AFIO_AF(GPIOC_OSC32_IN, 0U) | PIN_AFIO_AF(GPIOC_OSC32_OUT, 0U)) - -/* - * GPIOD setup: - * - * PD0 - PIN0 (input pullup). - * PD1 - PIN1 (input pullup). - * PD2 - PIN2 (input pullup). - * PD3 - PIN3 (input pullup). - * PD4 - CS43L22_RESET (output pushpull maximum). - * PD5 - OverCurrent (input floating). - * PD6 - PIN6 (input pullup). - * PD7 - PIN7 (input pullup). - * PD8 - PIN8 (input pullup). - * PD9 - PIN9 (input pullup). - * PD10 - PIN10 (input pullup). - * PD11 - PIN11 (input pullup). - * PD12 - LED4 (output pushpull maximum). - * PD13 - LED3 (output pushpull maximum). - * PD14 - LED5 (output pushpull maximum). - * PD15 - LED6 (output pushpull maximum). - */ -#define VAL_GPIOD_MODER (PIN_MODE_INPUT(GPIOD_PIN0) | PIN_MODE_INPUT(GPIOD_PIN1) | PIN_MODE_INPUT(GPIOD_PIN2) | PIN_MODE_INPUT(GPIOD_PIN3) | PIN_MODE_OUTPUT(GPIOD_CS43L22_RESET) | PIN_MODE_INPUT(GPIOD_OverCurrent) | PIN_MODE_INPUT(GPIOD_PIN6) | PIN_MODE_INPUT(GPIOD_PIN7) | PIN_MODE_INPUT(GPIOD_PIN8) | PIN_MODE_INPUT(GPIOD_PIN9) | PIN_MODE_INPUT(GPIOD_PIN10) | PIN_MODE_INPUT(GPIOD_PIN11) | PIN_MODE_OUTPUT(GPIOD_LED4) | PIN_MODE_OUTPUT(GPIOD_LED3) | PIN_MODE_OUTPUT(GPIOD_LED5) | PIN_MODE_OUTPUT(GPIOD_LED6)) -#define VAL_GPIOD_OTYPER (PIN_OTYPE_PUSHPULL(GPIOD_PIN0) | PIN_OTYPE_PUSHPULL(GPIOD_PIN1) | PIN_OTYPE_PUSHPULL(GPIOD_PIN2) | PIN_OTYPE_PUSHPULL(GPIOD_PIN3) | PIN_OTYPE_PUSHPULL(GPIOD_CS43L22_RESET) | PIN_OTYPE_PUSHPULL(GPIOD_OverCurrent) | PIN_OTYPE_PUSHPULL(GPIOD_PIN6) | PIN_OTYPE_PUSHPULL(GPIOD_PIN7) | PIN_OTYPE_PUSHPULL(GPIOD_PIN8) | PIN_OTYPE_PUSHPULL(GPIOD_PIN9) | PIN_OTYPE_PUSHPULL(GPIOD_PIN10) | PIN_OTYPE_PUSHPULL(GPIOD_PIN11) | PIN_OTYPE_PUSHPULL(GPIOD_LED4) | PIN_OTYPE_PUSHPULL(GPIOD_LED3) | PIN_OTYPE_PUSHPULL(GPIOD_LED5) | PIN_OTYPE_PUSHPULL(GPIOD_LED6)) -#define VAL_GPIOD_OSPEEDR (PIN_OSPEED_HIGH(GPIOD_PIN0) | PIN_OSPEED_HIGH(GPIOD_PIN1) | PIN_OSPEED_HIGH(GPIOD_PIN2) | PIN_OSPEED_HIGH(GPIOD_PIN3) | PIN_OSPEED_HIGH(GPIOD_CS43L22_RESET) | PIN_OSPEED_HIGH(GPIOD_OverCurrent) | PIN_OSPEED_HIGH(GPIOD_PIN6) | PIN_OSPEED_HIGH(GPIOD_PIN7) | PIN_OSPEED_HIGH(GPIOD_PIN8) | PIN_OSPEED_HIGH(GPIOD_PIN9) | PIN_OSPEED_HIGH(GPIOD_PIN10) | PIN_OSPEED_HIGH(GPIOD_PIN11) | PIN_OSPEED_HIGH(GPIOD_LED4) | PIN_OSPEED_HIGH(GPIOD_LED3) | PIN_OSPEED_HIGH(GPIOD_LED5) | PIN_OSPEED_HIGH(GPIOD_LED6)) -#define VAL_GPIOD_PUPDR (PIN_PUPDR_PULLUP(GPIOD_PIN0) | PIN_PUPDR_PULLUP(GPIOD_PIN1) | PIN_PUPDR_PULLUP(GPIOD_PIN2) | PIN_PUPDR_PULLUP(GPIOD_PIN3) | PIN_PUPDR_PULLUP(GPIOD_CS43L22_RESET) | PIN_PUPDR_FLOATING(GPIOD_OverCurrent) | PIN_PUPDR_PULLUP(GPIOD_PIN6) | PIN_PUPDR_PULLUP(GPIOD_PIN7) | PIN_PUPDR_PULLUP(GPIOD_PIN8) | PIN_PUPDR_PULLUP(GPIOD_PIN9) | PIN_PUPDR_PULLUP(GPIOD_PIN10) | PIN_PUPDR_PULLUP(GPIOD_PIN11) | PIN_PUPDR_FLOATING(GPIOD_LED4) | PIN_PUPDR_FLOATING(GPIOD_LED3) | PIN_PUPDR_FLOATING(GPIOD_LED5) | PIN_PUPDR_FLOATING(GPIOD_LED6)) -#define VAL_GPIOD_ODR (PIN_ODR_HIGH(GPIOD_PIN0) | PIN_ODR_HIGH(GPIOD_PIN1) | PIN_ODR_HIGH(GPIOD_PIN2) | PIN_ODR_HIGH(GPIOD_PIN3) | PIN_ODR_HIGH(GPIOD_CS43L22_RESET) | PIN_ODR_HIGH(GPIOD_OverCurrent) | PIN_ODR_HIGH(GPIOD_PIN6) | PIN_ODR_HIGH(GPIOD_PIN7) | PIN_ODR_HIGH(GPIOD_PIN8) | PIN_ODR_HIGH(GPIOD_PIN9) | PIN_ODR_HIGH(GPIOD_PIN10) | PIN_ODR_HIGH(GPIOD_PIN11) | PIN_ODR_LOW(GPIOD_LED4) | PIN_ODR_LOW(GPIOD_LED3) | PIN_ODR_LOW(GPIOD_LED5) | PIN_ODR_LOW(GPIOD_LED6)) -#define VAL_GPIOD_AFRL (PIN_AFIO_AF(GPIOD_PIN0, 0U) | PIN_AFIO_AF(GPIOD_PIN1, 0U) | PIN_AFIO_AF(GPIOD_PIN2, 0U) | PIN_AFIO_AF(GPIOD_PIN3, 0U) | PIN_AFIO_AF(GPIOD_CS43L22_RESET, 0U) | PIN_AFIO_AF(GPIOD_OverCurrent, 0U) | PIN_AFIO_AF(GPIOD_PIN6, 0U) | PIN_AFIO_AF(GPIOD_PIN7, 0U)) -#define VAL_GPIOD_AFRH (PIN_AFIO_AF(GPIOD_PIN8, 0U) | PIN_AFIO_AF(GPIOD_PIN9, 0U) | PIN_AFIO_AF(GPIOD_PIN10, 0U) | PIN_AFIO_AF(GPIOD_PIN11, 0U) | PIN_AFIO_AF(GPIOD_LED4, 0U) | PIN_AFIO_AF(GPIOD_LED3, 0U) | PIN_AFIO_AF(GPIOD_LED5, 0U) | PIN_AFIO_AF(GPIOD_LED6, 0U)) - -/* - * GPIOE setup: - * - * PE0 - L3GD20_INT1 (input pullup). - * PE1 - L3GD20_INT2 (input pullup). - * PE2 - LSM303DLHC_DRDY (input floating). - * PE3 - L3GD20_CS (output pushpull maximum). - * PE4 - LSM303DLHC_INT1 (output pushpull maximum). - * PE5 - LSM303DLHC_INT2 (output pushpull maximum). - * PE6 - PIN6 (input pullup). - * PE7 - PIN7 (input pullup). - * PE8 - PIN8 (input pullup). - * PE9 - PIN9 (input pullup). - * PE10 - PIN10 (input pullup). - * PE11 - PIN11 (input pullup). - * PE12 - PIN12 (input pullup). - * PE13 - PIN13 (input pullup). - * PE14 - PIN14 (input pullup). - * PE15 - PIN15 (input pullup). - */ -#define VAL_GPIOE_MODER (PIN_MODE_INPUT(GPIOE_L3GD20_INT1) | PIN_MODE_INPUT(GPIOE_L3GD20_INT2) | PIN_MODE_INPUT(GPIOE_LSM303DLHC_DRDY) | PIN_MODE_OUTPUT(GPIOE_L3GD20_CS) | PIN_MODE_OUTPUT(GPIOE_LSM303DLHC_INT1) | PIN_MODE_OUTPUT(GPIOE_LSM303DLHC_INT2) | PIN_MODE_INPUT(GPIOE_PIN6) | PIN_MODE_INPUT(GPIOE_PIN7) | PIN_MODE_INPUT(GPIOE_PIN8) | PIN_MODE_INPUT(GPIOE_PIN9) | PIN_MODE_INPUT(GPIOE_PIN10) | PIN_MODE_INPUT(GPIOE_PIN11) | PIN_MODE_INPUT(GPIOE_PIN12) | PIN_MODE_INPUT(GPIOE_PIN13) | PIN_MODE_INPUT(GPIOE_PIN14) | PIN_MODE_INPUT(GPIOE_PIN15)) -#define VAL_GPIOE_OTYPER (PIN_OTYPE_PUSHPULL(GPIOE_L3GD20_INT1) | PIN_OTYPE_PUSHPULL(GPIOE_L3GD20_INT2) | PIN_OTYPE_PUSHPULL(GPIOE_LSM303DLHC_DRDY) | PIN_OTYPE_PUSHPULL(GPIOE_L3GD20_CS) | PIN_OTYPE_PUSHPULL(GPIOE_LSM303DLHC_INT1) | PIN_OTYPE_PUSHPULL(GPIOE_LSM303DLHC_INT2) | PIN_OTYPE_PUSHPULL(GPIOE_PIN6) | PIN_OTYPE_PUSHPULL(GPIOE_PIN7) | PIN_OTYPE_PUSHPULL(GPIOE_PIN8) | PIN_OTYPE_PUSHPULL(GPIOE_PIN9) | PIN_OTYPE_PUSHPULL(GPIOE_PIN10) | PIN_OTYPE_PUSHPULL(GPIOE_PIN11) | PIN_OTYPE_PUSHPULL(GPIOE_PIN12) | PIN_OTYPE_PUSHPULL(GPIOE_PIN13) | PIN_OTYPE_PUSHPULL(GPIOE_PIN14) | PIN_OTYPE_PUSHPULL(GPIOE_PIN15)) -#define VAL_GPIOE_OSPEEDR (PIN_OSPEED_HIGH(GPIOE_L3GD20_INT1) | PIN_OSPEED_HIGH(GPIOE_L3GD20_INT2) | PIN_OSPEED_HIGH(GPIOE_LSM303DLHC_DRDY) | PIN_OSPEED_HIGH(GPIOE_L3GD20_CS) | PIN_OSPEED_HIGH(GPIOE_LSM303DLHC_INT1) | PIN_OSPEED_HIGH(GPIOE_LSM303DLHC_INT2) | PIN_OSPEED_HIGH(GPIOE_PIN6) | PIN_OSPEED_HIGH(GPIOE_PIN7) | PIN_OSPEED_HIGH(GPIOE_PIN8) | PIN_OSPEED_HIGH(GPIOE_PIN9) | PIN_OSPEED_HIGH(GPIOE_PIN10) | PIN_OSPEED_HIGH(GPIOE_PIN11) | PIN_OSPEED_HIGH(GPIOE_PIN12) | PIN_OSPEED_HIGH(GPIOE_PIN13) | PIN_OSPEED_HIGH(GPIOE_PIN14) | PIN_OSPEED_HIGH(GPIOE_PIN15)) -#define VAL_GPIOE_PUPDR (PIN_PUPDR_PULLUP(GPIOE_L3GD20_INT1) | PIN_PUPDR_PULLUP(GPIOE_L3GD20_INT2) | PIN_PUPDR_FLOATING(GPIOE_LSM303DLHC_DRDY) | PIN_PUPDR_PULLUP(GPIOE_L3GD20_CS) | PIN_PUPDR_PULLUP(GPIOE_LSM303DLHC_INT1) | PIN_PUPDR_PULLUP(GPIOE_LSM303DLHC_INT2) | PIN_PUPDR_PULLUP(GPIOE_PIN6) | PIN_PUPDR_PULLUP(GPIOE_PIN7) | PIN_PUPDR_PULLUP(GPIOE_PIN8) | PIN_PUPDR_PULLUP(GPIOE_PIN9) | PIN_PUPDR_PULLUP(GPIOE_PIN10) | PIN_PUPDR_PULLUP(GPIOE_PIN11) | PIN_PUPDR_PULLUP(GPIOE_PIN12) | PIN_PUPDR_PULLUP(GPIOE_PIN13) | PIN_PUPDR_PULLUP(GPIOE_PIN14) | PIN_PUPDR_PULLUP(GPIOE_PIN15)) -#define VAL_GPIOE_ODR (PIN_ODR_HIGH(GPIOE_L3GD20_INT1) | PIN_ODR_HIGH(GPIOE_L3GD20_INT2) | PIN_ODR_HIGH(GPIOE_LSM303DLHC_DRDY) | PIN_ODR_HIGH(GPIOE_L3GD20_CS) | PIN_ODR_HIGH(GPIOE_LSM303DLHC_INT1) | PIN_ODR_HIGH(GPIOE_LSM303DLHC_INT2) | PIN_ODR_HIGH(GPIOE_PIN6) | PIN_ODR_HIGH(GPIOE_PIN7) | PIN_ODR_HIGH(GPIOE_PIN8) | PIN_ODR_HIGH(GPIOE_PIN9) | PIN_ODR_HIGH(GPIOE_PIN10) | PIN_ODR_HIGH(GPIOE_PIN11) | PIN_ODR_HIGH(GPIOE_PIN12) | PIN_ODR_HIGH(GPIOE_PIN13) | PIN_ODR_HIGH(GPIOE_PIN14) | PIN_ODR_HIGH(GPIOE_PIN15)) -#define VAL_GPIOE_AFRL (PIN_AFIO_AF(GPIOE_L3GD20_INT1, 0U) | PIN_AFIO_AF(GPIOE_L3GD20_INT2, 0U) | PIN_AFIO_AF(GPIOE_LSM303DLHC_DRDY, 0U) | PIN_AFIO_AF(GPIOE_L3GD20_CS, 0U) | PIN_AFIO_AF(GPIOE_LSM303DLHC_INT1, 0U) | PIN_AFIO_AF(GPIOE_LSM303DLHC_INT2, 0U) | PIN_AFIO_AF(GPIOE_PIN6, 0U) | PIN_AFIO_AF(GPIOE_PIN7, 0U)) -#define VAL_GPIOE_AFRH (PIN_AFIO_AF(GPIOE_PIN8, 0U) | PIN_AFIO_AF(GPIOE_PIN9, 0U) | PIN_AFIO_AF(GPIOE_PIN10, 0U) | PIN_AFIO_AF(GPIOE_PIN11, 0U) | PIN_AFIO_AF(GPIOE_PIN12, 0U) | PIN_AFIO_AF(GPIOE_PIN13, 0U) | PIN_AFIO_AF(GPIOE_PIN14, 0U) | PIN_AFIO_AF(GPIOE_PIN15, 0U)) - -/* - * GPIOF setup: - * - * PF0 - PIN0 (input pullup). - * PF1 - PIN1 (input pullup). - * PF2 - PIN2 (input pullup). - * PF3 - PIN3 (input pullup). - * PF4 - PIN4 (input pullup). - * PF5 - PIN5 (input pullup). - * PF6 - PIN6 (input pullup). - * PF7 - PIN7 (input pullup). - * PF8 - PIN8 (input pullup). - * PF9 - PIN9 (input pullup). - * PF10 - PIN10 (input pullup). - * PF11 - PIN11 (input pullup). - * PF12 - PIN12 (input pullup). - * PF13 - PIN13 (input pullup). - * PF14 - PIN14 (input pullup). - * PF15 - PIN15 (input pullup). - */ -#define VAL_GPIOF_MODER (PIN_MODE_INPUT(GPIOF_PIN0) | PIN_MODE_INPUT(GPIOF_PIN1) | PIN_MODE_INPUT(GPIOF_PIN2) | PIN_MODE_INPUT(GPIOF_PIN3) | PIN_MODE_INPUT(GPIOF_PIN4) | PIN_MODE_INPUT(GPIOF_PIN5) | PIN_MODE_INPUT(GPIOF_PIN6) | PIN_MODE_INPUT(GPIOF_PIN7) | PIN_MODE_INPUT(GPIOF_PIN8) | PIN_MODE_INPUT(GPIOF_PIN9) | PIN_MODE_INPUT(GPIOF_PIN10) | PIN_MODE_INPUT(GPIOF_PIN11) | PIN_MODE_INPUT(GPIOF_PIN12) | PIN_MODE_INPUT(GPIOF_PIN13) | PIN_MODE_INPUT(GPIOF_PIN14) | PIN_MODE_INPUT(GPIOF_PIN15)) -#define VAL_GPIOF_OTYPER (PIN_OTYPE_PUSHPULL(GPIOF_PIN0) | PIN_OTYPE_PUSHPULL(GPIOF_PIN1) | PIN_OTYPE_PUSHPULL(GPIOF_PIN2) | PIN_OTYPE_PUSHPULL(GPIOF_PIN3) | PIN_OTYPE_PUSHPULL(GPIOF_PIN4) | PIN_OTYPE_PUSHPULL(GPIOF_PIN5) | PIN_OTYPE_PUSHPULL(GPIOF_PIN6) | PIN_OTYPE_PUSHPULL(GPIOF_PIN7) | PIN_OTYPE_PUSHPULL(GPIOF_PIN8) | PIN_OTYPE_PUSHPULL(GPIOF_PIN9) | PIN_OTYPE_PUSHPULL(GPIOF_PIN10) | PIN_OTYPE_PUSHPULL(GPIOF_PIN11) | PIN_OTYPE_PUSHPULL(GPIOF_PIN12) | PIN_OTYPE_PUSHPULL(GPIOF_PIN13) | PIN_OTYPE_PUSHPULL(GPIOF_PIN14) | PIN_OTYPE_PUSHPULL(GPIOF_PIN15)) -#define VAL_GPIOF_OSPEEDR (PIN_OSPEED_HIGH(GPIOF_PIN0) | PIN_OSPEED_HIGH(GPIOF_PIN1) | PIN_OSPEED_HIGH(GPIOF_PIN2) | PIN_OSPEED_HIGH(GPIOF_PIN3) | PIN_OSPEED_HIGH(GPIOF_PIN4) | PIN_OSPEED_HIGH(GPIOF_PIN5) | PIN_OSPEED_HIGH(GPIOF_PIN6) | PIN_OSPEED_HIGH(GPIOF_PIN7) | PIN_OSPEED_HIGH(GPIOF_PIN8) | PIN_OSPEED_HIGH(GPIOF_PIN9) | PIN_OSPEED_HIGH(GPIOF_PIN10) | PIN_OSPEED_HIGH(GPIOF_PIN11) | PIN_OSPEED_HIGH(GPIOF_PIN12) | PIN_OSPEED_HIGH(GPIOF_PIN13) | PIN_OSPEED_HIGH(GPIOF_PIN14) | PIN_OSPEED_HIGH(GPIOF_PIN15)) -#define VAL_GPIOF_PUPDR (PIN_PUPDR_PULLUP(GPIOF_PIN0) | PIN_PUPDR_PULLUP(GPIOF_PIN1) | PIN_PUPDR_PULLUP(GPIOF_PIN2) | PIN_PUPDR_PULLUP(GPIOF_PIN3) | PIN_PUPDR_PULLUP(GPIOF_PIN4) | PIN_PUPDR_PULLUP(GPIOF_PIN5) | PIN_PUPDR_PULLUP(GPIOF_PIN6) | PIN_PUPDR_PULLUP(GPIOF_PIN7) | PIN_PUPDR_PULLUP(GPIOF_PIN8) | PIN_PUPDR_PULLUP(GPIOF_PIN9) | PIN_PUPDR_PULLUP(GPIOF_PIN10) | PIN_PUPDR_PULLUP(GPIOF_PIN11) | PIN_PUPDR_PULLUP(GPIOF_PIN12) | PIN_PUPDR_PULLUP(GPIOF_PIN13) | PIN_PUPDR_PULLUP(GPIOF_PIN14) | PIN_PUPDR_PULLUP(GPIOF_PIN15)) -#define VAL_GPIOF_ODR (PIN_ODR_HIGH(GPIOF_PIN0) | PIN_ODR_HIGH(GPIOF_PIN1) | PIN_ODR_HIGH(GPIOF_PIN2) | PIN_ODR_HIGH(GPIOF_PIN3) | PIN_ODR_HIGH(GPIOF_PIN4) | PIN_ODR_HIGH(GPIOF_PIN5) | PIN_ODR_HIGH(GPIOF_PIN6) | PIN_ODR_HIGH(GPIOF_PIN7) | PIN_ODR_HIGH(GPIOF_PIN8) | PIN_ODR_HIGH(GPIOF_PIN9) | PIN_ODR_HIGH(GPIOF_PIN10) | PIN_ODR_HIGH(GPIOF_PIN11) | PIN_ODR_HIGH(GPIOF_PIN12) | PIN_ODR_HIGH(GPIOF_PIN13) | PIN_ODR_HIGH(GPIOF_PIN14) | PIN_ODR_HIGH(GPIOF_PIN15)) -#define VAL_GPIOF_AFRL (PIN_AFIO_AF(GPIOF_PIN0, 0U) | PIN_AFIO_AF(GPIOF_PIN1, 0U) | PIN_AFIO_AF(GPIOF_PIN2, 0U) | PIN_AFIO_AF(GPIOF_PIN3, 0U) | PIN_AFIO_AF(GPIOF_PIN4, 0U) | PIN_AFIO_AF(GPIOF_PIN5, 0U) | PIN_AFIO_AF(GPIOF_PIN6, 0U) | PIN_AFIO_AF(GPIOF_PIN7, 0U)) -#define VAL_GPIOF_AFRH (PIN_AFIO_AF(GPIOF_PIN8, 0U) | PIN_AFIO_AF(GPIOF_PIN9, 0U) | PIN_AFIO_AF(GPIOF_PIN10, 0U) | PIN_AFIO_AF(GPIOF_PIN11, 0U) | PIN_AFIO_AF(GPIOF_PIN12, 0U) | PIN_AFIO_AF(GPIOF_PIN13, 0U) | PIN_AFIO_AF(GPIOF_PIN14, 0U) | PIN_AFIO_AF(GPIOF_PIN15, 0U)) - -/* - * GPIOG setup: - * - * PG0 - PIN0 (input pullup). - * PG1 - PIN1 (input pullup). - * PG2 - PIN2 (input pullup). - * PG3 - PIN3 (input pullup). - * PG4 - PIN4 (input pullup). - * PG5 - PIN5 (input pullup). - * PG6 - PIN6 (input pullup). - * PG7 - PIN7 (input pullup). - * PG8 - PIN8 (input pullup). - * PG9 - PIN9 (input pullup). - * PG10 - PIN10 (input pullup). - * PG11 - PIN11 (input pullup). - * PG12 - PIN12 (input pullup). - * PG13 - PIN13 (input pullup). - * PG14 - PIN14 (input pullup). - * PG15 - PIN15 (input pullup). - */ -#define VAL_GPIOG_MODER (PIN_MODE_INPUT(GPIOG_PIN0) | PIN_MODE_INPUT(GPIOG_PIN1) | PIN_MODE_INPUT(GPIOG_PIN2) | PIN_MODE_INPUT(GPIOG_PIN3) | PIN_MODE_INPUT(GPIOG_PIN4) | PIN_MODE_INPUT(GPIOG_PIN5) | PIN_MODE_INPUT(GPIOG_PIN6) | PIN_MODE_INPUT(GPIOG_PIN7) | PIN_MODE_INPUT(GPIOG_PIN8) | PIN_MODE_INPUT(GPIOG_PIN9) | PIN_MODE_INPUT(GPIOG_PIN10) | PIN_MODE_INPUT(GPIOG_PIN11) | PIN_MODE_INPUT(GPIOG_PIN12) | PIN_MODE_INPUT(GPIOG_PIN13) | PIN_MODE_INPUT(GPIOG_PIN14) | PIN_MODE_INPUT(GPIOG_PIN15)) -#define VAL_GPIOG_OTYPER (PIN_OTYPE_PUSHPULL(GPIOG_PIN0) | PIN_OTYPE_PUSHPULL(GPIOG_PIN1) | PIN_OTYPE_PUSHPULL(GPIOG_PIN2) | PIN_OTYPE_PUSHPULL(GPIOG_PIN3) | PIN_OTYPE_PUSHPULL(GPIOG_PIN4) | PIN_OTYPE_PUSHPULL(GPIOG_PIN5) | PIN_OTYPE_PUSHPULL(GPIOG_PIN6) | PIN_OTYPE_PUSHPULL(GPIOG_PIN7) | PIN_OTYPE_PUSHPULL(GPIOG_PIN8) | PIN_OTYPE_PUSHPULL(GPIOG_PIN9) | PIN_OTYPE_PUSHPULL(GPIOG_PIN10) | PIN_OTYPE_PUSHPULL(GPIOG_PIN11) | PIN_OTYPE_PUSHPULL(GPIOG_PIN12) | PIN_OTYPE_PUSHPULL(GPIOG_PIN13) | PIN_OTYPE_PUSHPULL(GPIOG_PIN14) | PIN_OTYPE_PUSHPULL(GPIOG_PIN15)) -#define VAL_GPIOG_OSPEEDR (PIN_OSPEED_HIGH(GPIOG_PIN0) | PIN_OSPEED_HIGH(GPIOG_PIN1) | PIN_OSPEED_HIGH(GPIOG_PIN2) | PIN_OSPEED_HIGH(GPIOG_PIN3) | PIN_OSPEED_HIGH(GPIOG_PIN4) | PIN_OSPEED_HIGH(GPIOG_PIN5) | PIN_OSPEED_HIGH(GPIOG_PIN6) | PIN_OSPEED_HIGH(GPIOG_PIN7) | PIN_OSPEED_HIGH(GPIOG_PIN8) | PIN_OSPEED_HIGH(GPIOG_PIN9) | PIN_OSPEED_HIGH(GPIOG_PIN10) | PIN_OSPEED_HIGH(GPIOG_PIN11) | PIN_OSPEED_HIGH(GPIOG_PIN12) | PIN_OSPEED_HIGH(GPIOG_PIN13) | PIN_OSPEED_HIGH(GPIOG_PIN14) | PIN_OSPEED_HIGH(GPIOG_PIN15)) -#define VAL_GPIOG_PUPDR (PIN_PUPDR_PULLUP(GPIOG_PIN0) | PIN_PUPDR_PULLUP(GPIOG_PIN1) | PIN_PUPDR_PULLUP(GPIOG_PIN2) | PIN_PUPDR_PULLUP(GPIOG_PIN3) | PIN_PUPDR_PULLUP(GPIOG_PIN4) | PIN_PUPDR_PULLUP(GPIOG_PIN5) | PIN_PUPDR_PULLUP(GPIOG_PIN6) | PIN_PUPDR_PULLUP(GPIOG_PIN7) | PIN_PUPDR_PULLUP(GPIOG_PIN8) | PIN_PUPDR_PULLUP(GPIOG_PIN9) | PIN_PUPDR_PULLUP(GPIOG_PIN10) | PIN_PUPDR_PULLUP(GPIOG_PIN11) | PIN_PUPDR_PULLUP(GPIOG_PIN12) | PIN_PUPDR_PULLUP(GPIOG_PIN13) | PIN_PUPDR_PULLUP(GPIOG_PIN14) | PIN_PUPDR_PULLUP(GPIOG_PIN15)) -#define VAL_GPIOG_ODR (PIN_ODR_HIGH(GPIOG_PIN0) | PIN_ODR_HIGH(GPIOG_PIN1) | PIN_ODR_HIGH(GPIOG_PIN2) | PIN_ODR_HIGH(GPIOG_PIN3) | PIN_ODR_HIGH(GPIOG_PIN4) | PIN_ODR_HIGH(GPIOG_PIN5) | PIN_ODR_HIGH(GPIOG_PIN6) | PIN_ODR_HIGH(GPIOG_PIN7) | PIN_ODR_HIGH(GPIOG_PIN8) | PIN_ODR_HIGH(GPIOG_PIN9) | PIN_ODR_HIGH(GPIOG_PIN10) | PIN_ODR_HIGH(GPIOG_PIN11) | PIN_ODR_HIGH(GPIOG_PIN12) | PIN_ODR_HIGH(GPIOG_PIN13) | PIN_ODR_HIGH(GPIOG_PIN14) | PIN_ODR_HIGH(GPIOG_PIN15)) -#define VAL_GPIOG_AFRL (PIN_AFIO_AF(GPIOG_PIN0, 0U) | PIN_AFIO_AF(GPIOG_PIN1, 0U) | PIN_AFIO_AF(GPIOG_PIN2, 0U) | PIN_AFIO_AF(GPIOG_PIN3, 0U) | PIN_AFIO_AF(GPIOG_PIN4, 0U) | PIN_AFIO_AF(GPIOG_PIN5, 0U) | PIN_AFIO_AF(GPIOG_PIN6, 0U) | PIN_AFIO_AF(GPIOG_PIN7, 0U)) -#define VAL_GPIOG_AFRH (PIN_AFIO_AF(GPIOG_PIN8, 0U) | PIN_AFIO_AF(GPIOG_PIN9, 0U) | PIN_AFIO_AF(GPIOG_PIN10, 0U) | PIN_AFIO_AF(GPIOG_PIN11, 0U) | PIN_AFIO_AF(GPIOG_PIN12, 0U) | PIN_AFIO_AF(GPIOG_PIN13, 0U) | PIN_AFIO_AF(GPIOG_PIN14, 0U) | PIN_AFIO_AF(GPIOG_PIN15, 0U)) - -/* - * GPIOH setup: - * - * PH0 - OSC_IN (input floating). - * PH1 - OSC_OUT (input floating). - * PH2 - PIN2 (input pullup). - * PH3 - PIN3 (input pullup). - * PH4 - PIN4 (input pullup). - * PH5 - PIN5 (input pullup). - * PH6 - PIN6 (input pullup). - * PH7 - PIN7 (input pullup). - * PH8 - PIN8 (input pullup). - * PH9 - PIN9 (input pullup). - * PH10 - PIN10 (input pullup). - * PH11 - PIN11 (input pullup). - * PH12 - PIN12 (input pullup). - * PH13 - PIN13 (input pullup). - * PH14 - PIN14 (input pullup). - * PH15 - PIN15 (input pullup). - */ -#define VAL_GPIOH_MODER (PIN_MODE_INPUT(GPIOH_OSC_IN) | PIN_MODE_INPUT(GPIOH_OSC_OUT) | PIN_MODE_INPUT(GPIOH_PIN2) | PIN_MODE_INPUT(GPIOH_PIN3) | PIN_MODE_INPUT(GPIOH_PIN4) | PIN_MODE_INPUT(GPIOH_PIN5) | PIN_MODE_INPUT(GPIOH_PIN6) | PIN_MODE_INPUT(GPIOH_PIN7) | PIN_MODE_INPUT(GPIOH_PIN8) | PIN_MODE_INPUT(GPIOH_PIN9) | PIN_MODE_INPUT(GPIOH_PIN10) | PIN_MODE_INPUT(GPIOH_PIN11) | PIN_MODE_INPUT(GPIOH_PIN12) | PIN_MODE_INPUT(GPIOH_PIN13) | PIN_MODE_INPUT(GPIOH_PIN14) | PIN_MODE_INPUT(GPIOH_PIN15)) -#define VAL_GPIOH_OTYPER (PIN_OTYPE_PUSHPULL(GPIOH_OSC_IN) | PIN_OTYPE_PUSHPULL(GPIOH_OSC_OUT) | PIN_OTYPE_PUSHPULL(GPIOH_PIN2) | PIN_OTYPE_PUSHPULL(GPIOH_PIN3) | PIN_OTYPE_PUSHPULL(GPIOH_PIN4) | PIN_OTYPE_PUSHPULL(GPIOH_PIN5) | PIN_OTYPE_PUSHPULL(GPIOH_PIN6) | PIN_OTYPE_PUSHPULL(GPIOH_PIN7) | PIN_OTYPE_PUSHPULL(GPIOH_PIN8) | PIN_OTYPE_PUSHPULL(GPIOH_PIN9) | PIN_OTYPE_PUSHPULL(GPIOH_PIN10) | PIN_OTYPE_PUSHPULL(GPIOH_PIN11) | PIN_OTYPE_PUSHPULL(GPIOH_PIN12) | PIN_OTYPE_PUSHPULL(GPIOH_PIN13) | PIN_OTYPE_PUSHPULL(GPIOH_PIN14) | PIN_OTYPE_PUSHPULL(GPIOH_PIN15)) -#define VAL_GPIOH_OSPEEDR (PIN_OSPEED_HIGH(GPIOH_OSC_IN) | PIN_OSPEED_HIGH(GPIOH_OSC_OUT) | PIN_OSPEED_HIGH(GPIOH_PIN2) | PIN_OSPEED_HIGH(GPIOH_PIN3) | PIN_OSPEED_HIGH(GPIOH_PIN4) | PIN_OSPEED_HIGH(GPIOH_PIN5) | PIN_OSPEED_HIGH(GPIOH_PIN6) | PIN_OSPEED_HIGH(GPIOH_PIN7) | PIN_OSPEED_HIGH(GPIOH_PIN8) | PIN_OSPEED_HIGH(GPIOH_PIN9) | PIN_OSPEED_HIGH(GPIOH_PIN10) | PIN_OSPEED_HIGH(GPIOH_PIN11) | PIN_OSPEED_HIGH(GPIOH_PIN12) | PIN_OSPEED_HIGH(GPIOH_PIN13) | PIN_OSPEED_HIGH(GPIOH_PIN14) | PIN_OSPEED_HIGH(GPIOH_PIN15)) -#define VAL_GPIOH_PUPDR (PIN_PUPDR_FLOATING(GPIOH_OSC_IN) | PIN_PUPDR_FLOATING(GPIOH_OSC_OUT) | PIN_PUPDR_PULLUP(GPIOH_PIN2) | PIN_PUPDR_PULLUP(GPIOH_PIN3) | PIN_PUPDR_PULLUP(GPIOH_PIN4) | PIN_PUPDR_PULLUP(GPIOH_PIN5) | PIN_PUPDR_PULLUP(GPIOH_PIN6) | PIN_PUPDR_PULLUP(GPIOH_PIN7) | PIN_PUPDR_PULLUP(GPIOH_PIN8) | PIN_PUPDR_PULLUP(GPIOH_PIN9) | PIN_PUPDR_PULLUP(GPIOH_PIN10) | PIN_PUPDR_PULLUP(GPIOH_PIN11) | PIN_PUPDR_PULLUP(GPIOH_PIN12) | PIN_PUPDR_PULLUP(GPIOH_PIN13) | PIN_PUPDR_PULLUP(GPIOH_PIN14) | PIN_PUPDR_PULLUP(GPIOH_PIN15)) -#define VAL_GPIOH_ODR (PIN_ODR_HIGH(GPIOH_OSC_IN) | PIN_ODR_HIGH(GPIOH_OSC_OUT) | PIN_ODR_HIGH(GPIOH_PIN2) | PIN_ODR_HIGH(GPIOH_PIN3) | PIN_ODR_HIGH(GPIOH_PIN4) | PIN_ODR_HIGH(GPIOH_PIN5) | PIN_ODR_HIGH(GPIOH_PIN6) | PIN_ODR_HIGH(GPIOH_PIN7) | PIN_ODR_HIGH(GPIOH_PIN8) | PIN_ODR_HIGH(GPIOH_PIN9) | PIN_ODR_HIGH(GPIOH_PIN10) | PIN_ODR_HIGH(GPIOH_PIN11) | PIN_ODR_HIGH(GPIOH_PIN12) | PIN_ODR_HIGH(GPIOH_PIN13) | PIN_ODR_HIGH(GPIOH_PIN14) | PIN_ODR_HIGH(GPIOH_PIN15)) -#define VAL_GPIOH_AFRL (PIN_AFIO_AF(GPIOH_OSC_IN, 0U) | PIN_AFIO_AF(GPIOH_OSC_OUT, 0U) | PIN_AFIO_AF(GPIOH_PIN2, 0U) | PIN_AFIO_AF(GPIOH_PIN3, 0U) | PIN_AFIO_AF(GPIOH_PIN4, 0U) | PIN_AFIO_AF(GPIOH_PIN5, 0U) | PIN_AFIO_AF(GPIOH_PIN6, 0U) | PIN_AFIO_AF(GPIOH_PIN7, 0U)) -#define VAL_GPIOH_AFRH (PIN_AFIO_AF(GPIOH_PIN8, 0U) | PIN_AFIO_AF(GPIOH_PIN9, 0U) | PIN_AFIO_AF(GPIOH_PIN10, 0U) | PIN_AFIO_AF(GPIOH_PIN11, 0U) | PIN_AFIO_AF(GPIOH_PIN12, 0U) | PIN_AFIO_AF(GPIOH_PIN13, 0U) | PIN_AFIO_AF(GPIOH_PIN14, 0U) | PIN_AFIO_AF(GPIOH_PIN15, 0U)) - -/* - * GPIOI setup: - * - * PI0 - PIN0 (input pullup). - * PI1 - PIN1 (input pullup). - * PI2 - PIN2 (input pullup). - * PI3 - PIN3 (input pullup). - * PI4 - PIN4 (input pullup). - * PI5 - PIN5 (input pullup). - * PI6 - PIN6 (input pullup). - * PI7 - PIN7 (input pullup). - * PI8 - PIN8 (input pullup). - * PI9 - PIN9 (input pullup). - * PI10 - PIN10 (input pullup). - * PI11 - PIN11 (input pullup). - * PI12 - PIN12 (input pullup). - * PI13 - PIN13 (input pullup). - * PI14 - PIN14 (input pullup). - * PI15 - PIN15 (input pullup). - */ -#define VAL_GPIOI_MODER (PIN_MODE_INPUT(GPIOI_PIN0) | PIN_MODE_INPUT(GPIOI_PIN1) | PIN_MODE_INPUT(GPIOI_PIN2) | PIN_MODE_INPUT(GPIOI_PIN3) | PIN_MODE_INPUT(GPIOI_PIN4) | PIN_MODE_INPUT(GPIOI_PIN5) | PIN_MODE_INPUT(GPIOI_PIN6) | PIN_MODE_INPUT(GPIOI_PIN7) | PIN_MODE_INPUT(GPIOI_PIN8) | PIN_MODE_INPUT(GPIOI_PIN9) | PIN_MODE_INPUT(GPIOI_PIN10) | PIN_MODE_INPUT(GPIOI_PIN11) | PIN_MODE_INPUT(GPIOI_PIN12) | PIN_MODE_INPUT(GPIOI_PIN13) | PIN_MODE_INPUT(GPIOI_PIN14) | PIN_MODE_INPUT(GPIOI_PIN15)) -#define VAL_GPIOI_OTYPER (PIN_OTYPE_PUSHPULL(GPIOI_PIN0) | PIN_OTYPE_PUSHPULL(GPIOI_PIN1) | PIN_OTYPE_PUSHPULL(GPIOI_PIN2) | PIN_OTYPE_PUSHPULL(GPIOI_PIN3) | PIN_OTYPE_PUSHPULL(GPIOI_PIN4) | PIN_OTYPE_PUSHPULL(GPIOI_PIN5) | PIN_OTYPE_PUSHPULL(GPIOI_PIN6) | PIN_OTYPE_PUSHPULL(GPIOI_PIN7) | PIN_OTYPE_PUSHPULL(GPIOI_PIN8) | PIN_OTYPE_PUSHPULL(GPIOI_PIN9) | PIN_OTYPE_PUSHPULL(GPIOI_PIN10) | PIN_OTYPE_PUSHPULL(GPIOI_PIN11) | PIN_OTYPE_PUSHPULL(GPIOI_PIN12) | PIN_OTYPE_PUSHPULL(GPIOI_PIN13) | PIN_OTYPE_PUSHPULL(GPIOI_PIN14) | PIN_OTYPE_PUSHPULL(GPIOI_PIN15)) -#define VAL_GPIOI_OSPEEDR (PIN_OSPEED_HIGH(GPIOI_PIN0) | PIN_OSPEED_HIGH(GPIOI_PIN1) | PIN_OSPEED_HIGH(GPIOI_PIN2) | PIN_OSPEED_HIGH(GPIOI_PIN3) | PIN_OSPEED_HIGH(GPIOI_PIN4) | PIN_OSPEED_HIGH(GPIOI_PIN5) | PIN_OSPEED_HIGH(GPIOI_PIN6) | PIN_OSPEED_HIGH(GPIOI_PIN7) | PIN_OSPEED_HIGH(GPIOI_PIN8) | PIN_OSPEED_HIGH(GPIOI_PIN9) | PIN_OSPEED_HIGH(GPIOI_PIN10) | PIN_OSPEED_HIGH(GPIOI_PIN11) | PIN_OSPEED_HIGH(GPIOI_PIN12) | PIN_OSPEED_HIGH(GPIOI_PIN13) | PIN_OSPEED_HIGH(GPIOI_PIN14) | PIN_OSPEED_HIGH(GPIOI_PIN15)) -#define VAL_GPIOI_PUPDR (PIN_PUPDR_PULLUP(GPIOI_PIN0) | PIN_PUPDR_PULLUP(GPIOI_PIN1) | PIN_PUPDR_PULLUP(GPIOI_PIN2) | PIN_PUPDR_PULLUP(GPIOI_PIN3) | PIN_PUPDR_PULLUP(GPIOI_PIN4) | PIN_PUPDR_PULLUP(GPIOI_PIN5) | PIN_PUPDR_PULLUP(GPIOI_PIN6) | PIN_PUPDR_PULLUP(GPIOI_PIN7) | PIN_PUPDR_PULLUP(GPIOI_PIN8) | PIN_PUPDR_PULLUP(GPIOI_PIN9) | PIN_PUPDR_PULLUP(GPIOI_PIN10) | PIN_PUPDR_PULLUP(GPIOI_PIN11) | PIN_PUPDR_PULLUP(GPIOI_PIN12) | PIN_PUPDR_PULLUP(GPIOI_PIN13) | PIN_PUPDR_PULLUP(GPIOI_PIN14) | PIN_PUPDR_PULLUP(GPIOI_PIN15)) -#define VAL_GPIOI_ODR (PIN_ODR_HIGH(GPIOI_PIN0) | PIN_ODR_HIGH(GPIOI_PIN1) | PIN_ODR_HIGH(GPIOI_PIN2) | PIN_ODR_HIGH(GPIOI_PIN3) | PIN_ODR_HIGH(GPIOI_PIN4) | PIN_ODR_HIGH(GPIOI_PIN5) | PIN_ODR_HIGH(GPIOI_PIN6) | PIN_ODR_HIGH(GPIOI_PIN7) | PIN_ODR_HIGH(GPIOI_PIN8) | PIN_ODR_HIGH(GPIOI_PIN9) | PIN_ODR_HIGH(GPIOI_PIN10) | PIN_ODR_HIGH(GPIOI_PIN11) | PIN_ODR_HIGH(GPIOI_PIN12) | PIN_ODR_HIGH(GPIOI_PIN13) | PIN_ODR_HIGH(GPIOI_PIN14) | PIN_ODR_HIGH(GPIOI_PIN15)) -#define VAL_GPIOI_AFRL (PIN_AFIO_AF(GPIOI_PIN0, 0U) | PIN_AFIO_AF(GPIOI_PIN1, 0U) | PIN_AFIO_AF(GPIOI_PIN2, 0U) | PIN_AFIO_AF(GPIOI_PIN3, 0U) | PIN_AFIO_AF(GPIOI_PIN4, 0U) | PIN_AFIO_AF(GPIOI_PIN5, 0U) | PIN_AFIO_AF(GPIOI_PIN6, 0U) | PIN_AFIO_AF(GPIOI_PIN7, 0U)) -#define VAL_GPIOI_AFRH (PIN_AFIO_AF(GPIOI_PIN8, 0U) | PIN_AFIO_AF(GPIOI_PIN9, 0U) | PIN_AFIO_AF(GPIOI_PIN10, 0U) | PIN_AFIO_AF(GPIOI_PIN11, 0U) | PIN_AFIO_AF(GPIOI_PIN12, 0U) | PIN_AFIO_AF(GPIOI_PIN13, 0U) | PIN_AFIO_AF(GPIOI_PIN14, 0U) | PIN_AFIO_AF(GPIOI_PIN15, 0U)) - -/*===========================================================================*/ -/* External declarations. */ -/*===========================================================================*/ - -#if !defined(_FROM_ASM_) -# ifdef __cplusplus -extern "C" { -# endif -void boardInit(void); -# ifdef __cplusplus -} -# endif -#endif /* _FROM_ASM_ */ - -#endif /* BOARD_H */ diff --git a/drivers/boards/BLACKPILL_STM32_F401/cfg/board.chcfg b/drivers/boards/BLACKPILL_STM32_F401/cfg/board.chcfg deleted file mode 100644 index 7559ceb938..0000000000 --- a/drivers/boards/BLACKPILL_STM32_F401/cfg/board.chcfg +++ /dev/null @@ -1,1193 +0,0 @@ -<?xml version="1.0" encoding="UTF-8"?> -<!-- STM32F4xx board Template --> -<board - xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" - xsi:noNamespaceSchemaLocation="http://www.chibios.org/xml/schema/boards/stm32f4xx_board.xsd"> - <configuration_settings> - <templates_path>resources/gencfg/processors/boards/stm32f4xx/templates</templates_path> - <output_path>..</output_path> - <hal_version>5.0.x</hal_version> - </configuration_settings> - <board_name>STMicroelectronics STM32F401C-Discovery</board_name> - <board_id>ST_STM32F401C_DISCOVERY</board_id> - <board_functions></board_functions> - <subtype>STM32F401xC</subtype> - <clocks - HSEFrequency="8000000" - HSEBypass="false" - LSEFrequency="0" - LSEBypass="false" - VDD="300" /> - <ports> - <GPIOA> - <pin0 - ID="BUTTON" - Type="PushPull" - Level="High" - Speed="Maximum" - Resistor="Floating" - Mode="Input" - Alternate="0" /> - <pin1 - ID="" - Type="PushPull" - Level="High" - Speed="Maximum" - Resistor="PullUp" - Mode="Input" - Alternate="0" /> - <pin2 - ID="" - Type="PushPull" - Level="High" - Speed="Maximum" - Resistor="PullUp" - Mode="Input" - Alternate="0" /> - <pin3 - ID="" - Type="PushPull" - Level="High" - Speed="Maximum" - Resistor="PullUp" - Mode="Input" - Alternate="0" /> - <pin4 - ID="CS43L22_LRCK" - Type="PushPull" - Level="High" - Speed="Maximum" - Resistor="Floating" - Mode="Alternate" - Alternate="6" /> - <pin5 - ID="L3GD20_SCL" - Type="PushPull" - Level="High" - Speed="Maximum" - Resistor="Floating" - Mode="Alternate" - Alternate="5" /> - <pin6 - ID="L3GD20_SD0" - Type="PushPull" - Level="High" - Speed="Maximum" - Resistor="PullUp" - Mode="Alternate" - Alternate="5" /> - <pin7 - ID="L3GD20_SDI" - Type="PushPull" - Level="High" - Speed="Maximum" - Resistor="PullUp" - Mode="Alternate" - Alternate="5" /> - <pin8 - ID="" - Type="PushPull" - Level="High" - Speed="Maximum" - Resistor="PullUp" - Mode="Input" - Alternate="0" /> - <pin9 - ID="VBUS_FS" - Type="PushPull" - Level="High" - Speed="Maximum" - Resistor="Floating" - Mode="Input" - Alternate="0" /> - <pin10 - ID="OTG_FS_ID" - Type="PushPull" - Level="High" - Speed="Maximum" - Resistor="Floating" - Mode="Alternate" - Alternate="10" /> - <pin11 - ID="OTG_FS_DM" - Type="PushPull" - Level="High" - Speed="Maximum" - Resistor="Floating" - Mode="Alternate" - Alternate="10" /> - <pin12 - ID="OTG_FS_DP" - Type="PushPull" - Level="High" - Speed="Maximum" - Resistor="Floating" - Mode="Alternate" - Alternate="10" /> - <pin13 - ID="SWDIO" - Type="PushPull" - Level="High" - Speed="Maximum" - Resistor="Floating" - Mode="Alternate" - Alternate="0" /> - <pin14 - ID="SWCLK" - Type="PushPull" - Level="High" - Speed="Maximum" - Resistor="Floating" - Mode="Alternate" - Alternate="0" /> - <pin15 - ID="" - Type="PushPull" - Level="High" - Speed="Maximum" - Resistor="PullUp" - Mode="Input" - Alternate="0" /> - </GPIOA> - <GPIOB> - <pin0 - ID="" - Type="PushPull" - Level="High" - Speed="Maximum" - Resistor="PullUp" - Mode="Input" - Alternate="0" /> - <pin1 - ID="" - Type="PushPull" - Level="High" - Speed="Maximum" - Resistor="PullUp" - Mode="Input" - Alternate="0" /> - <pin2 - ID="" - Type="PushPull" - Level="High" - Speed="Maximum" - Resistor="PullUp" - Mode="Input" - Alternate="0" /> - <pin3 - ID="SWO" - Type="PushPull" - Level="High" - Speed="Maximum" - Resistor="PullUp" - Mode="Alternate" - Alternate="0" /> - <pin4 - ID="" - Type="PushPull" - Level="High" - Speed="Maximum" - Resistor="PullUp" - Mode="Input" - Alternate="0" /> - <pin5 - ID="" - Type="PushPull" - Level="High" - Speed="Maximum" - Resistor="PullUp" - Mode="Input" - Alternate="0" /> - <pin6 - ID="LSM303DLHC_SCL" - Type="PushPull" - Level="High" - Speed="Maximum" - Resistor="Floating" - Mode="Alternate" - Alternate="4" /> - <pin7 - ID="" - Type="PushPull" - Level="High" - Speed="Maximum" - Resistor="PullUp" - Mode="Input" - Alternate="0" /> - <pin8 - ID="" - Type="PushPull" - Level="High" - Speed="Maximum" - Resistor="PullUp" - Mode="Input" - Alternate="0" /> - <pin9 - ID="LSM303DLHC_SDA" - Type="PushPull" - Level="High" - Speed="Maximum" - Resistor="Floating" - Mode="Alternate" - Alternate="4" /> - <pin10 - ID="MP45DT02_CLK_IN" - Type="PushPull" - Level="High" - Speed="Maximum" - Resistor="Floating" - Mode="Alternate" - Alternate="5" /> - <pin11 - ID="" - Type="PushPull" - Level="High" - Speed="Maximum" - Resistor="PullUp" - Mode="Input" - Alternate="0" /> - <pin12 - ID="" - Type="PushPull" - Level="High" - Speed="Maximum" - Resistor="PullUp" - Mode="Input" - Alternate="0" /> - <pin13 - ID="" - Type="PushPull" - Level="High" - Speed="Maximum" - Resistor="PullUp" - Mode="Input" - Alternate="0" /> - <pin14 - ID="" - Type="PushPull" - Level="High" - Speed="Maximum" - Resistor="PullUp" - Mode="Input" - Alternate="0" /> - <pin15 - ID="" - Type="PushPull" - Level="High" - Speed="Maximum" - Resistor="PullUp" - Mode="Input" - Alternate="0" /> - </GPIOB> - <GPIOC> - <pin0 - ID="OTG_FS_POWER_ON" - Type="PushPull" - Level="High" - Speed="Maximum" - Resistor="PullUp" - Mode="Output" - Alternate="0" /> - <pin1 - ID="" - Type="PushPull" - Level="High" - Speed="Maximum" - Resistor="PullUp" - Mode="Input" - Alternate="0" /> - <pin2 - ID="" - Type="PushPull" - Level="High" - Speed="Maximum" - Resistor="PullUp" - Mode="Input" - Alternate="0" /> - <pin3 - ID="CS43L22_AIN4x MP45DT02_PDM_OUT" - Type="PushPull" - Level="High" - Speed="Maximum" - Resistor="Floating" - Mode="Alternate" - Alternate="5" /> - <pin4 - ID="" - Type="PushPull" - Level="High" - Speed="Maximum" - Resistor="PullUp" - Mode="Input" - Alternate="0" /> - <pin5 - ID="" - Type="PushPull" - Level="High" - Speed="Maximum" - Resistor="PullUp" - Mode="Input" - Alternate="0" /> - <pin6 - ID="" - Type="PushPull" - Level="High" - Speed="Maximum" - Resistor="PullUp" - Mode="Input" - Alternate="0" /> - <pin7 - ID="CS43L22_MCLK" - Type="PushPull" - Level="High" - Speed="Maximum" - Resistor="PullUp" - Mode="Alternate" - Alternate="6" /> - <pin8 - ID="" - Type="PushPull" - Level="High" - Speed="Maximum" - Resistor="PullUp" - Mode="Input" - Alternate="0" /> - <pin9 - ID="" - Type="PushPull" - Level="High" - Speed="Maximum" - Resistor="PullUp" - Mode="Input" - Alternate="0" /> - <pin10 - ID="CS43L22_SCLK" - Type="PushPull" - Level="High" - Speed="Maximum" - Resistor="PullUp" - Mode="Alternate" - Alternate="6" /> - <pin11 - ID="" - Type="PushPull" - Level="High" - Speed="Maximum" - Resistor="PullUp" - Mode="Input" - Alternate="0" /> - <pin12 - ID="CS43L22_SDIN" - Type="PushPull" - Level="High" - Speed="Maximum" - Resistor="PullUp" - Mode="Alternate" - Alternate="6" /> - <pin13 - ID="" - Type="PushPull" - Level="High" - Speed="Maximum" - Resistor="PullUp" - Mode="Input" - Alternate="0" /> - <pin14 - ID="OSC32_IN" - Type="PushPull" - Level="High" - Speed="Maximum" - Resistor="Floating" - Mode="Input" - Alternate="0" /> - <pin15 - ID="OSC32_OUT" - Type="PushPull" - Level="High" - Speed="Maximum" - Resistor="Floating" - Mode="Input" - Alternate="0" /> - </GPIOC> - <GPIOD> - <pin0 - ID="" - Type="PushPull" - Level="High" - Speed="Maximum" - Resistor="PullUp" - Mode="Input" - Alternate="0" /> - <pin1 - ID="" - Type="PushPull" - Level="High" - Speed="Maximum" - Resistor="PullUp" - Mode="Input" - Alternate="0" /> - <pin2 - ID="" - Type="PushPull" - Level="High" - Speed="Maximum" - Resistor="PullUp" - Mode="Input" - Alternate="0" /> - <pin3 - ID="" - Type="PushPull" - Level="High" - Speed="Maximum" - Resistor="PullUp" - Mode="Input" - Alternate="0" /> - <pin4 - ID="CS43L22_RESET" - Type="PushPull" - Level="High" - Speed="Maximum" - Resistor="PullUp" - Mode="Output" - Alternate="0" /> - <pin5 - ID="OverCurrent" - Type="PushPull" - Level="High" - Speed="Maximum" - Resistor="Floating" - Mode="Input" - Alternate="0" /> - <pin6 - ID="" - Type="PushPull" - Level="High" - Speed="Maximum" - Resistor="PullUp" - Mode="Input" - Alternate="0" /> - <pin7 - ID="" - Type="PushPull" - Level="High" - Speed="Maximum" - Resistor="PullUp" - Mode="Input" - Alternate="0" /> - <pin8 - ID="" - Type="PushPull" - Level="High" - Speed="Maximum" - Resistor="PullUp" - Mode="Input" - Alternate="0" /> - <pin9 - ID="" - Type="PushPull" - Level="High" - Speed="Maximum" - Resistor="PullUp" - Mode="Input" - Alternate="0" /> - <pin10 - ID="" - Type="PushPull" - Level="High" - Speed="Maximum" - Resistor="PullUp" - Mode="Input" - Alternate="0" /> - <pin11 - ID="" - Type="PushPull" - Level="High" - Speed="Maximum" - Resistor="PullUp" - Mode="Input" - Alternate="0" /> - <pin12 - ID="LED4" - Type="PushPull" - Level="Low" - Speed="Maximum" - Resistor="Floating" - Mode="Output" - Alternate="0" /> - <pin13 - ID="LED3" - Type="PushPull" - Level="Low" - Speed="Maximum" - Resistor="Floating" - Mode="Output" - Alternate="0" /> - <pin14 - ID="LED5" - Type="PushPull" - Level="Low" - Speed="Maximum" - Resistor="Floating" - Mode="Output" - Alternate="0" /> - <pin15 - ID="LED6" - Type="PushPull" - Level="Low" - Speed="Maximum" - Resistor="Floating" - Mode="Output" - Alternate="0" /> - </GPIOD> - <GPIOE> - <pin0 - ID="L3GD20_INT1" - Type="PushPull" - Level="High" - Speed="Maximum" - Resistor="PullUp" - Mode="Input" - Alternate="0" /> - <pin1 - ID="L3GD20_INT2" - Type="PushPull" - Level="High" - Speed="Maximum" - Resistor="PullUp" - Mode="Input" - Alternate="0" /> - <pin2 - ID="LSM303DLHC_DRDY" - Type="PushPull" - Level="High" - Speed="Maximum" - Resistor="Floating" - Mode="Input" - Alternate="0" /> - <pin3 - ID="L3GD20_CS" - Type="PushPull" - Level="High" - Speed="Maximum" - Resistor="PullUp" - Mode="Output" - Alternate="0" /> - <pin4 - ID="LSM303DLHC_INT1" - Type="PushPull" - Level="High" - Speed="Maximum" - Resistor="PullUp" - Mode="Output" - Alternate="0" /> - <pin5 - ID="LSM303DLHC_INT2" - Type="PushPull" - Level="High" - Speed="Maximum" - Resistor="PullUp" - Mode="Output" - Alternate="0" /> - <pin6 - ID="" - Type="PushPull" - Level="High" - Speed="Maximum" - Resistor="PullUp" - Mode="Input" - Alternate="0" /> - <pin7 - ID="" - Type="PushPull" - Level="High" - Speed="Maximum" - Resistor="PullUp" - Mode="Input" - Alternate="0" /> - <pin8 - ID="" - Type="PushPull" - Level="High" - Speed="Maximum" - Resistor="PullUp" - Mode="Input" - Alternate="0" /> - <pin9 - ID="" - Type="PushPull" - Level="High" - Speed="Maximum" - Resistor="PullUp" - Mode="Input" - Alternate="0" /> - <pin10 - ID="" - Type="PushPull" - Level="High" - Speed="Maximum" - Resistor="PullUp" - Mode="Input" - Alternate="0" /> - <pin11 - ID="" - Type="PushPull" - Level="High" - Speed="Maximum" - Resistor="PullUp" - Mode="Input" - Alternate="0" /> - <pin12 - ID="" - Type="PushPull" - Level="High" - Speed="Maximum" - Resistor="PullUp" - Mode="Input" - Alternate="0" /> - <pin13 - ID="" - Type="PushPull" - Level="High" - Speed="Maximum" - Resistor="PullUp" - Mode="Input" - Alternate="0" /> - <pin14 - ID="" - Type="PushPull" - Level="High" - Speed="Maximum" - Resistor="PullUp" - Mode="Input" - Alternate="0" /> - <pin15 - ID="" - Type="PushPull" - Level="High" - Speed="Maximum" - Resistor="PullUp" - Mode="Input" - Alternate="0" /> - </GPIOE> - <GPIOF> - <pin0 - ID="" - Type="PushPull" - Level="High" - Speed="Maximum" - Resistor="PullUp" - Mode="Input" - Alternate="0" /> - <pin1 - ID="" - Type="PushPull" - Level="High" - Speed="Maximum" - Resistor="PullUp" - Mode="Input" - Alternate="0" /> - <pin2 - ID="" - Type="PushPull" - Level="High" - Speed="Maximum" - Resistor="PullUp" - Mode="Input" - Alternate="0" /> - <pin3 - ID="" - Type="PushPull" - Level="High" - Speed="Maximum" - Resistor="PullUp" - Mode="Input" - Alternate="0" /> - <pin4 - ID="" - Type="PushPull" - Level="High" - Speed="Maximum" - Resistor="PullUp" - Mode="Input" - Alternate="0" /> - <pin5 - ID="" - Type="PushPull" - Level="High" - Speed="Maximum" - Resistor="PullUp" - Mode="Input" - Alternate="0" /> - <pin6 - ID="" - Type="PushPull" - Level="High" - Speed="Maximum" - Resistor="PullUp" - Mode="Input" - Alternate="0" /> - <pin7 - ID="" - Type="PushPull" - Level="High" - Speed="Maximum" - Resistor="PullUp" - Mode="Input" - Alternate="0" /> - <pin8 - ID="" - Type="PushPull" - Level="High" - Speed="Maximum" - Resistor="PullUp" - Mode="Input" - Alternate="0" /> - <pin9 - ID="" - Type="PushPull" - Level="High" - Speed="Maximum" - Resistor="PullUp" - Mode="Input" - Alternate="0" /> - <pin10 - ID="" - Type="PushPull" - Level="High" - Speed="Maximum" - Resistor="PullUp" - Mode="Input" - Alternate="0" /> - <pin11 - ID="" - Type="PushPull" - Level="High" - Speed="Maximum" - Resistor="PullUp" - Mode="Input" - Alternate="0" /> - <pin12 - ID="" - Type="PushPull" - Level="High" - Speed="Maximum" - Resistor="PullUp" - Mode="Input" - Alternate="0" /> - <pin13 - ID="" - Type="PushPull" - Level="High" - Speed="Maximum" - Resistor="PullUp" - Mode="Input" - Alternate="0" /> - <pin14 - ID="" - Type="PushPull" - Level="High" - Speed="Maximum" - Resistor="PullUp" - Mode="Input" - Alternate="0" /> - <pin15 - ID="" - Type="PushPull" - Level="High" - Speed="Maximum" - Resistor="PullUp" - Mode="Input" - Alternate="0" /> - </GPIOF> - <GPIOG> - <pin0 - ID="" - Type="PushPull" - Level="High" - Speed="Maximum" - Resistor="PullUp" - Mode="Input" - Alternate="0" /> - <pin1 - ID="" - Type="PushPull" - Level="High" - Speed="Maximum" - Resistor="PullUp" - Mode="Input" - Alternate="0" /> - <pin2 - ID="" - Type="PushPull" - Level="High" - Speed="Maximum" - Resistor="PullUp" - Mode="Input" - Alternate="0" /> - <pin3 - ID="" - Type="PushPull" - Level="High" - Speed="Maximum" - Resistor="PullUp" - Mode="Input" - Alternate="0" /> - <pin4 - ID="" - Type="PushPull" - Level="High" - Speed="Maximum" - Resistor="PullUp" - Mode="Input" - Alternate="0" /> - <pin5 - ID="" - Type="PushPull" - Level="High" - Speed="Maximum" - Resistor="PullUp" - Mode="Input" - Alternate="0" /> - <pin6 - ID="" - Type="PushPull" - Level="High" - Speed="Maximum" - Resistor="PullUp" - Mode="Input" - Alternate="0" /> - <pin7 - ID="" - Type="PushPull" - Level="High" - Speed="Maximum" - Resistor="PullUp" - Mode="Input" - Alternate="0" /> - <pin8 - ID="" - Type="PushPull" - Level="High" - Speed="Maximum" - Resistor="PullUp" - Mode="Input" - Alternate="0" /> - <pin9 - ID="" - Type="PushPull" - Level="High" - Speed="Maximum" - Resistor="PullUp" - Mode="Input" - Alternate="0" /> - <pin10 - ID="" - Type="PushPull" - Level="High" - Speed="Maximum" - Resistor="PullUp" - Mode="Input" - Alternate="0" /> - <pin11 - ID="" - Type="PushPull" - Level="High" - Speed="Maximum" - Resistor="PullUp" - Mode="Input" - Alternate="0" /> - <pin12 - ID="" - Type="PushPull" - Level="High" - Speed="Maximum" - Resistor="PullUp" - Mode="Input" - Alternate="0" /> - <pin13 - ID="" - Type="PushPull" - Level="High" - Speed="Maximum" - Resistor="PullUp" - Mode="Input" - Alternate="0" /> - <pin14 - ID="" - Type="PushPull" - Level="High" - Speed="Maximum" - Resistor="PullUp" - Mode="Input" - Alternate="0" /> - <pin15 - ID="" - Type="PushPull" - Level="High" - Speed="Maximum" - Resistor="PullUp" - Mode="Input" - Alternate="0" /> - </GPIOG> - <GPIOH> - <pin0 - ID="OSC_IN" - Type="PushPull" - Level="High" - Speed="Maximum" - Resistor="Floating" - Mode="Input" - Alternate="0" /> - <pin1 - ID="OSC_OUT" - Type="PushPull" - Level="High" - Speed="Maximum" - Resistor="Floating" - Mode="Input" - Alternate="0" /> - <pin2 - ID="" - Type="PushPull" - Level="High" - Speed="Maximum" - Resistor="PullUp" - Mode="Input" - Alternate="0" /> - <pin3 - ID="" - Type="PushPull" - Level="High" - Speed="Maximum" - Resistor="PullUp" - Mode="Input" - Alternate="0" /> - <pin4 - ID="" - Type="PushPull" - Level="High" - Speed="Maximum" - Resistor="PullUp" - Mode="Input" - Alternate="0" /> - <pin5 - ID="" - Type="PushPull" - Level="High" - Speed="Maximum" - Resistor="PullUp" - Mode="Input" - Alternate="0" /> - <pin6 - ID="" - Type="PushPull" - Level="High" - Speed="Maximum" - Resistor="PullUp" - Mode="Input" - Alternate="0" /> - <pin7 - ID="" - Type="PushPull" - Level="High" - Speed="Maximum" - Resistor="PullUp" - Mode="Input" - Alternate="0" /> - <pin8 - ID="" - Type="PushPull" - Level="High" - Speed="Maximum" - Resistor="PullUp" - Mode="Input" - Alternate="0" /> - <pin9 - ID="" - Type="PushPull" - Level="High" - Speed="Maximum" - Resistor="PullUp" - Mode="Input" - Alternate="0" /> - <pin10 - ID="" - Type="PushPull" - Level="High" - Speed="Maximum" - Resistor="PullUp" - Mode="Input" - Alternate="0" /> - <pin11 - ID="" - Type="PushPull" - Level="High" - Speed="Maximum" - Resistor="PullUp" - Mode="Input" - Alternate="0" /> - <pin12 - ID="" - Type="PushPull" - Level="High" - Speed="Maximum" - Resistor="PullUp" - Mode="Input" - Alternate="0" /> - <pin13 - ID="" - Type="PushPull" - Level="High" - Speed="Maximum" - Resistor="PullUp" - Mode="Input" - Alternate="0" /> - <pin14 - ID="" - Type="PushPull" - Level="High" - Speed="Maximum" - Resistor="PullUp" - Mode="Input" - Alternate="0" /> - <pin15 - ID="" - Type="PushPull" - Level="High" - Speed="Maximum" - Resistor="PullUp" - Mode="Input" - Alternate="0" /> - </GPIOH> - <GPIOI> - <pin0 - ID="" - Type="PushPull" - Level="High" - Speed="Maximum" - Resistor="PullUp" - Mode="Input" - Alternate="0" /> - <pin1 - ID="" - Type="PushPull" - Level="High" - Speed="Maximum" - Resistor="PullUp" - Mode="Input" - Alternate="0" /> - <pin2 - ID="" - Type="PushPull" - Level="High" - Speed="Maximum" - Resistor="PullUp" - Mode="Input" - Alternate="0" /> - <pin3 - ID="" - Type="PushPull" - Level="High" - Speed="Maximum" - Resistor="PullUp" - Mode="Input" - Alternate="0" /> - <pin4 - ID="" - Type="PushPull" - Level="High" - Speed="Maximum" - Resistor="PullUp" - Mode="Input" - Alternate="0" /> - <pin5 - ID="" - Type="PushPull" - Level="High" - Speed="Maximum" - Resistor="PullUp" - Mode="Input" - Alternate="0" /> - <pin6 - ID="" - Type="PushPull" - Level="High" - Speed="Maximum" - Resistor="PullUp" - Mode="Input" - Alternate="0" /> - <pin7 - ID="" - Type="PushPull" - Level="High" - Speed="Maximum" - Resistor="PullUp" - Mode="Input" - Alternate="0" /> - <pin8 - ID="" - Type="PushPull" - Level="High" - Speed="Maximum" - Resistor="PullUp" - Mode="Input" - Alternate="0" /> - <pin9 - ID="" - Type="PushPull" - Level="High" - Speed="Maximum" - Resistor="PullUp" - Mode="Input" - Alternate="0" /> - <pin10 - ID="" - Type="PushPull" - Level="High" - Speed="Maximum" - Resistor="PullUp" - Mode="Input" - Alternate="0" /> - <pin11 - ID="" - Type="PushPull" - Level="High" - Speed="Maximum" - Resistor="PullUp" - Mode="Input" - Alternate="0" /> - <pin12 - ID="" - Type="PushPull" - Level="High" - Speed="Maximum" - Resistor="PullUp" - Mode="Input" - Alternate="0" /> - <pin13 - ID="" - Type="PushPull" - Level="High" - Speed="Maximum" - Resistor="PullUp" - Mode="Input" - Alternate="0" /> - <pin14 - ID="" - Type="PushPull" - Level="High" - Speed="Maximum" - Resistor="PullUp" - Mode="Input" - Alternate="0" /> - <pin15 - ID="" - Type="PushPull" - Level="High" - Speed="Maximum" - Resistor="PullUp" - Mode="Input" - Alternate="0" /> - </GPIOI> - </ports> -</board> diff --git a/drivers/boards/BLACKPILL_STM32_F401/cfg/board.fmpp b/drivers/boards/BLACKPILL_STM32_F401/cfg/board.fmpp deleted file mode 100644 index 41754c1414..0000000000 --- a/drivers/boards/BLACKPILL_STM32_F401/cfg/board.fmpp +++ /dev/null @@ -1,15 +0,0 @@ -sourceRoot: ../../../../../tools/ftl/processors/boards/stm32f4xx/templates -outputRoot: .. -dataRoot: . - -freemarkerLinks: { - lib: ../../../../../tools/ftl/libs -} - -data : { - doc1:xml ( - board.chcfg - { - } - ) -} diff --git a/drivers/boards/BLACKPILL_STM32_F411/board.c b/drivers/boards/BLACKPILL_STM32_F411/board.c deleted file mode 100644 index 330e06c8aa..0000000000 --- a/drivers/boards/BLACKPILL_STM32_F411/board.c +++ /dev/null @@ -1,250 +0,0 @@ -/* - ChibiOS - Copyright (C) 2006..2018 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/* - * This file has been automatically generated using ChibiStudio board - * generator plugin. Do not edit manually. - */ - -#include "hal.h" -#include "stm32_gpio.h" - -/*===========================================================================*/ -/* Driver local definitions. */ -/*===========================================================================*/ - -/*===========================================================================*/ -/* Driver exported variables. */ -/*===========================================================================*/ - -/*===========================================================================*/ -/* Driver local variables and types. */ -/*===========================================================================*/ - -/** - * @brief Type of STM32 GPIO port setup. - */ -typedef struct { - uint32_t moder; - uint32_t otyper; - uint32_t ospeedr; - uint32_t pupdr; - uint32_t odr; - uint32_t afrl; - uint32_t afrh; -} gpio_setup_t; - -/** - * @brief Type of STM32 GPIO initialization data. - */ -typedef struct { -#if STM32_HAS_GPIOA || defined(__DOXYGEN__) - gpio_setup_t PAData; -#endif -#if STM32_HAS_GPIOB || defined(__DOXYGEN__) - gpio_setup_t PBData; -#endif -#if STM32_HAS_GPIOC || defined(__DOXYGEN__) - gpio_setup_t PCData; -#endif -#if STM32_HAS_GPIOD || defined(__DOXYGEN__) - gpio_setup_t PDData; -#endif -#if STM32_HAS_GPIOE || defined(__DOXYGEN__) - gpio_setup_t PEData; -#endif -#if STM32_HAS_GPIOF || defined(__DOXYGEN__) - gpio_setup_t PFData; -#endif -#if STM32_HAS_GPIOG || defined(__DOXYGEN__) - gpio_setup_t PGData; -#endif -#if STM32_HAS_GPIOH || defined(__DOXYGEN__) - gpio_setup_t PHData; -#endif -#if STM32_HAS_GPIOI || defined(__DOXYGEN__) - gpio_setup_t PIData; -#endif -#if STM32_HAS_GPIOJ || defined(__DOXYGEN__) - gpio_setup_t PJData; -#endif -#if STM32_HAS_GPIOK || defined(__DOXYGEN__) - gpio_setup_t PKData; -#endif -} gpio_config_t; - -/** - * @brief STM32 GPIO static initialization data. - */ -static const gpio_config_t gpio_default_config = { -#if STM32_HAS_GPIOA - {VAL_GPIOA_MODER, VAL_GPIOA_OTYPER, VAL_GPIOA_OSPEEDR, VAL_GPIOA_PUPDR, VAL_GPIOA_ODR, VAL_GPIOA_AFRL, VAL_GPIOA_AFRH}, -#endif -#if STM32_HAS_GPIOB - {VAL_GPIOB_MODER, VAL_GPIOB_OTYPER, VAL_GPIOB_OSPEEDR, VAL_GPIOB_PUPDR, VAL_GPIOB_ODR, VAL_GPIOB_AFRL, VAL_GPIOB_AFRH}, -#endif -#if STM32_HAS_GPIOC - {VAL_GPIOC_MODER, VAL_GPIOC_OTYPER, VAL_GPIOC_OSPEEDR, VAL_GPIOC_PUPDR, VAL_GPIOC_ODR, VAL_GPIOC_AFRL, VAL_GPIOC_AFRH}, -#endif -#if STM32_HAS_GPIOD - {VAL_GPIOD_MODER, VAL_GPIOD_OTYPER, VAL_GPIOD_OSPEEDR, VAL_GPIOD_PUPDR, VAL_GPIOD_ODR, VAL_GPIOD_AFRL, VAL_GPIOD_AFRH}, -#endif -#if STM32_HAS_GPIOE - {VAL_GPIOE_MODER, VAL_GPIOE_OTYPER, VAL_GPIOE_OSPEEDR, VAL_GPIOE_PUPDR, VAL_GPIOE_ODR, VAL_GPIOE_AFRL, VAL_GPIOE_AFRH}, -#endif -#if STM32_HAS_GPIOF - {VAL_GPIOF_MODER, VAL_GPIOF_OTYPER, VAL_GPIOF_OSPEEDR, VAL_GPIOF_PUPDR, VAL_GPIOF_ODR, VAL_GPIOF_AFRL, VAL_GPIOF_AFRH}, -#endif -#if STM32_HAS_GPIOG - {VAL_GPIOG_MODER, VAL_GPIOG_OTYPER, VAL_GPIOG_OSPEEDR, VAL_GPIOG_PUPDR, VAL_GPIOG_ODR, VAL_GPIOG_AFRL, VAL_GPIOG_AFRH}, -#endif -#if STM32_HAS_GPIOH - {VAL_GPIOH_MODER, VAL_GPIOH_OTYPER, VAL_GPIOH_OSPEEDR, VAL_GPIOH_PUPDR, VAL_GPIOH_ODR, VAL_GPIOH_AFRL, VAL_GPIOH_AFRH}, -#endif -#if STM32_HAS_GPIOI - {VAL_GPIOI_MODER, VAL_GPIOI_OTYPER, VAL_GPIOI_OSPEEDR, VAL_GPIOI_PUPDR, VAL_GPIOI_ODR, VAL_GPIOI_AFRL, VAL_GPIOI_AFRH}, -#endif -#if STM32_HAS_GPIOJ - {VAL_GPIOJ_MODER, VAL_GPIOJ_OTYPER, VAL_GPIOJ_OSPEEDR, VAL_GPIOJ_PUPDR, VAL_GPIOJ_ODR, VAL_GPIOJ_AFRL, VAL_GPIOJ_AFRH}, -#endif -#if STM32_HAS_GPIOK - {VAL_GPIOK_MODER, VAL_GPIOK_OTYPER, VAL_GPIOK_OSPEEDR, VAL_GPIOK_PUPDR, VAL_GPIOK_ODR, VAL_GPIOK_AFRL, VAL_GPIOK_AFRH} -#endif -}; - -/*===========================================================================*/ -/* Driver local functions. */ -/*===========================================================================*/ - -static void gpio_init(stm32_gpio_t *gpiop, const gpio_setup_t *config) { - gpiop->OTYPER = config->otyper; - gpiop->OSPEEDR = config->ospeedr; - gpiop->PUPDR = config->pupdr; - gpiop->ODR = config->odr; - gpiop->AFRL = config->afrl; - gpiop->AFRH = config->afrh; - gpiop->MODER = config->moder; -} - -static void stm32_gpio_init(void) { - /* Enabling GPIO-related clocks, the mask comes from the - registry header file.*/ - rccResetAHB1(STM32_GPIO_EN_MASK); - rccEnableAHB1(STM32_GPIO_EN_MASK, true); - - /* Initializing all the defined GPIO ports.*/ -#if STM32_HAS_GPIOA - gpio_init(GPIOA, &gpio_default_config.PAData); -#endif -#if STM32_HAS_GPIOB - gpio_init(GPIOB, &gpio_default_config.PBData); -#endif -#if STM32_HAS_GPIOC - gpio_init(GPIOC, &gpio_default_config.PCData); -#endif -#if STM32_HAS_GPIOD - gpio_init(GPIOD, &gpio_default_config.PDData); -#endif -#if STM32_HAS_GPIOE - gpio_init(GPIOE, &gpio_default_config.PEData); -#endif -#if STM32_HAS_GPIOF - gpio_init(GPIOF, &gpio_default_config.PFData); -#endif -#if STM32_HAS_GPIOG - gpio_init(GPIOG, &gpio_default_config.PGData); -#endif -#if STM32_HAS_GPIOH - gpio_init(GPIOH, &gpio_default_config.PHData); -#endif -#if STM32_HAS_GPIOI - gpio_init(GPIOI, &gpio_default_config.PIData); -#endif -#if STM32_HAS_GPIOJ - gpio_init(GPIOJ, &gpio_default_config.PJData); -#endif -#if STM32_HAS_GPIOK - gpio_init(GPIOK, &gpio_default_config.PKData); -#endif -} - -/*===========================================================================*/ -/* Driver interrupt handlers. */ -/*===========================================================================*/ - -/*===========================================================================*/ -/* Driver exported functions. */ -/*===========================================================================*/ - -__attribute__((weak)) void enter_bootloader_mode_if_requested(void) {} - -/** - * @brief Early initialization code. - * @details GPIO ports and system clocks are initialized before everything - * else. - */ -void __early_init(void) { - enter_bootloader_mode_if_requested(); - - stm32_gpio_init(); - stm32_clock_init(); -} - -#if HAL_USE_SDC || defined(__DOXYGEN__) -/** - * @brief SDC card detection. - */ -bool sdc_lld_is_card_inserted(SDCDriver *sdcp) { - (void)sdcp; - /* TODO: Fill the implementation.*/ - return true; -} - -/** - * @brief SDC card write protection detection. - */ -bool sdc_lld_is_write_protected(SDCDriver *sdcp) { - (void)sdcp; - /* TODO: Fill the implementation.*/ - return false; -} -#endif /* HAL_USE_SDC */ - -#if HAL_USE_MMC_SPI || defined(__DOXYGEN__) -/** - * @brief MMC_SPI card detection. - */ -bool mmc_lld_is_card_inserted(MMCDriver *mmcp) { - (void)mmcp; - /* TODO: Fill the implementation.*/ - return true; -} - -/** - * @brief MMC_SPI card write protection detection. - */ -bool mmc_lld_is_write_protected(MMCDriver *mmcp) { - (void)mmcp; - /* TODO: Fill the implementation.*/ - return false; -} -#endif - -/** - * @brief Board-specific initialization code. - * @todo Add your board-specific code, if any. - */ -void boardInit(void) {} diff --git a/drivers/boards/BLACKPILL_STM32_F411/board.h b/drivers/boards/BLACKPILL_STM32_F411/board.h deleted file mode 100644 index c0613b4a71..0000000000 --- a/drivers/boards/BLACKPILL_STM32_F411/board.h +++ /dev/null @@ -1,583 +0,0 @@ -/* - ChibiOS - Copyright (C) 2006..2018 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/* - * This file has been automatically generated using ChibiStudio board - * generator plugin. Do not edit manually. - */ - -#ifndef BOARD_H -#define BOARD_H - -/*===========================================================================*/ -/* Driver constants. */ -/*===========================================================================*/ - -/* - * Setup for STM32F411CEU6 black pill board. - */ - -/* - * Board identifier. - */ -#define BOARD_BLACKPILL_STM32_F411 -#define BOARD_NAME "STM32F411CEU6 blackpill" - -/* - * Allow Board to boot USB without extra A9 hardware/software config - */ -#define BOARD_OTG_NOVBUSSENS 1 - -/* - * Board oscillators-related settings. - */ -#if !defined(STM32_LSECLK) -# define STM32_LSECLK 32768U -#endif - -#if !defined(STM32_HSECLK) -# define STM32_HSECLK 25000000U -#endif - -//#define STM32_HSE_BYPASS - -/* - * Board voltages. - * Required for performance limits calculation. - */ -#define STM32_VDD 300U - -/* - * MCU type as defined in the ST header. - */ -#define STM32F411xE - -/* - * IO pins assignments. - */ -#define GPIOA_ARD_A0 0U -#define GPIOA_ADC1_IN0 0U -#define GPIOA_ARD_A1 1U -#define GPIOA_ADC1_IN1 1U -#define GPIOA_ARD_D1 2U -#define GPIOA_USART2_TX 2U -#define GPIOA_ARD_D0 3U -#define GPIOA_USART2_RX 3U -#define GPIOA_ARD_A2 4U -#define GPIOA_ADC1_IN4 4U -#define GPIOA_LED_GREEN 5U -#define GPIOA_ARD_D13 5U -#define GPIOA_ARD_D12 6U -#define GPIOA_ARD_D11 7U -#define GPIOA_ARD_D7 8U -#define GPIOA_ARD_D8 9U -#define GPIOA_ARD_D2 10U -#define GPIOA_OTG_FS_DM 11U -#define GPIOA_OTG_FS_DP 12U -#define GPIOA_SWDIO 13U -#define GPIOA_SWCLK 14U -#define GPIOA_PIN15 15U - -#define GPIOB_ARD_A3 0U -#define GPIOB_ADC1_IN8 0U -#define GPIOB_PIN1 1U -#define GPIOB_PIN2 2U -#define GPIOB_SWO 3U -#define GPIOB_ARD_D3 3U -#define GPIOB_ARD_D5 4U -#define GPIOB_ARD_D4 5U -#define GPIOB_ARD_D10 6U -#define GPIOB_PIN7 7U -#define GPIOB_ARD_D15 8U -#define GPIOB_ARD_D14 9U -#define GPIOB_ARD_D6 10U -#define GPIOB_PIN11 11U -#define GPIOB_PIN12 12U -#define GPIOB_PIN13 13U -#define GPIOB_PIN14 14U -#define GPIOB_PIN15 15U - -#define GPIOC_ARD_A5 0U -#define GPIOC_ADC1_IN10 0U -#define GPIOC_ARD_A4 1U -#define GPIOC_ADC1_IN11 1U -#define GPIOC_PIN2 2U -#define GPIOC_PIN3 3U -#define GPIOC_PIN4 4U -#define GPIOC_PIN5 5U -#define GPIOC_PIN6 6U -#define GPIOC_ARD_D9 7U -#define GPIOC_PIN8 8U -#define GPIOC_PIN9 9U -#define GPIOC_PIN10 10U -#define GPIOC_PIN11 11U -#define GPIOC_PIN12 12U -#define GPIOC_BUTTON 13U -#define GPIOC_OSC32_IN 14U -#define GPIOC_OSC32_OUT 15U - -#define GPIOD_PIN0 0U -#define GPIOD_PIN1 1U -#define GPIOD_PIN2 2U -#define GPIOD_PIN3 3U -#define GPIOD_PIN4 4U -#define GPIOD_PIN5 5U -#define GPIOD_PIN6 6U -#define GPIOD_PIN7 7U -#define GPIOD_PIN8 8U -#define GPIOD_PIN9 9U -#define GPIOD_PIN10 10U -#define GPIOD_PIN11 11U -#define GPIOD_PIN12 12U -#define GPIOD_PIN13 13U -#define GPIOD_PIN14 14U -#define GPIOD_PIN15 15U - -#define GPIOE_PIN0 0U -#define GPIOE_PIN1 1U -#define GPIOE_PIN2 2U -#define GPIOE_PIN3 3U -#define GPIOE_PIN4 4U -#define GPIOE_PIN5 5U -#define GPIOE_PIN6 6U -#define GPIOE_PIN7 7U -#define GPIOE_PIN8 8U -#define GPIOE_PIN9 9U -#define GPIOE_PIN10 10U -#define GPIOE_PIN11 11U -#define GPIOE_PIN12 12U -#define GPIOE_PIN13 13U -#define GPIOE_PIN14 14U -#define GPIOE_PIN15 15U - -#define GPIOF_PIN0 0U -#define GPIOF_PIN1 1U -#define GPIOF_PIN2 2U -#define GPIOF_PIN3 3U -#define GPIOF_PIN4 4U -#define GPIOF_PIN5 5U -#define GPIOF_PIN6 6U -#define GPIOF_PIN7 7U -#define GPIOF_PIN8 8U -#define GPIOF_PIN9 9U -#define GPIOF_PIN10 10U -#define GPIOF_PIN11 11U -#define GPIOF_PIN12 12U -#define GPIOF_PIN13 13U -#define GPIOF_PIN14 14U -#define GPIOF_PIN15 15U - -#define GPIOG_PIN0 0U -#define GPIOG_PIN1 1U -#define GPIOG_PIN2 2U -#define GPIOG_PIN3 3U -#define GPIOG_PIN4 4U -#define GPIOG_PIN5 5U -#define GPIOG_PIN6 6U -#define GPIOG_PIN7 7U -#define GPIOG_PIN8 8U -#define GPIOG_PIN9 9U -#define GPIOG_PIN10 10U -#define GPIOG_PIN11 11U -#define GPIOG_PIN12 12U -#define GPIOG_PIN13 13U -#define GPIOG_PIN14 14U -#define GPIOG_PIN15 15U - -#define GPIOH_OSC_IN 0U -#define GPIOH_OSC_OUT 1U -#define GPIOH_PIN2 2U -#define GPIOH_PIN3 3U -#define GPIOH_PIN4 4U -#define GPIOH_PIN5 5U -#define GPIOH_PIN6 6U -#define GPIOH_PIN7 7U -#define GPIOH_PIN8 8U -#define GPIOH_PIN9 9U -#define GPIOH_PIN10 10U -#define GPIOH_PIN11 11U -#define GPIOH_PIN12 12U -#define GPIOH_PIN13 13U -#define GPIOH_PIN14 14U -#define GPIOH_PIN15 15U - -#define GPIOI_PIN0 0U -#define GPIOI_PIN1 1U -#define GPIOI_PIN2 2U -#define GPIOI_PIN3 3U -#define GPIOI_PIN4 4U -#define GPIOI_PIN5 5U -#define GPIOI_PIN6 6U -#define GPIOI_PIN7 7U -#define GPIOI_PIN8 8U -#define GPIOI_PIN9 9U -#define GPIOI_PIN10 10U -#define GPIOI_PIN11 11U -#define GPIOI_PIN12 12U -#define GPIOI_PIN13 13U -#define GPIOI_PIN14 14U -#define GPIOI_PIN15 15U - -/* - * IO lines assignments. - */ -#define LINE_ARD_A0 PAL_LINE(GPIOA, 0U) -#define LINE_ADC1_IN0 PAL_LINE(GPIOA, 0U) -#define LINE_ARD_A1 PAL_LINE(GPIOA, 1U) -#define LINE_ADC1_IN1 PAL_LINE(GPIOA, 1U) -#define LINE_ARD_D1 PAL_LINE(GPIOA, 2U) -#define LINE_USART2_TX PAL_LINE(GPIOA, 2U) -#define LINE_ARD_D0 PAL_LINE(GPIOA, 3U) -#define LINE_USART2_RX PAL_LINE(GPIOA, 3U) -#define LINE_ARD_A2 PAL_LINE(GPIOA, 4U) -#define LINE_ADC1_IN4 PAL_LINE(GPIOA, 4U) -#define LINE_LED_GREEN PAL_LINE(GPIOA, 5U) -#define LINE_ARD_D13 PAL_LINE(GPIOA, 5U) -#define LINE_ARD_D12 PAL_LINE(GPIOA, 6U) -#define LINE_ARD_D11 PAL_LINE(GPIOA, 7U) -#define LINE_ARD_D7 PAL_LINE(GPIOA, 8U) -#define LINE_ARD_D8 PAL_LINE(GPIOA, 9U) -#define LINE_ARD_D2 PAL_LINE(GPIOA, 10U) -#define LINE_OTG_FS_DM PAL_LINE(GPIOA, 11U) -#define LINE_OTG_FS_DP PAL_LINE(GPIOA, 12U) -#define LINE_SWDIO PAL_LINE(GPIOA, 13U) -#define LINE_SWCLK PAL_LINE(GPIOA, 14U) -#define LINE_ARD_A3 PAL_LINE(GPIOB, 0U) -#define LINE_ADC1_IN8 PAL_LINE(GPIOB, 0U) -#define LINE_SWO PAL_LINE(GPIOB, 3U) -#define LINE_ARD_D3 PAL_LINE(GPIOB, 3U) -#define LINE_ARD_D5 PAL_LINE(GPIOB, 4U) -#define LINE_ARD_D4 PAL_LINE(GPIOB, 5U) -#define LINE_ARD_D10 PAL_LINE(GPIOB, 6U) -#define LINE_ARD_D15 PAL_LINE(GPIOB, 8U) -#define LINE_ARD_D14 PAL_LINE(GPIOB, 9U) -#define LINE_ARD_D6 PAL_LINE(GPIOB, 10U) -#define LINE_ARD_A5 PAL_LINE(GPIOC, 0U) -#define LINE_ADC1_IN10 PAL_LINE(GPIOC, 0U) -#define LINE_ARD_A4 PAL_LINE(GPIOC, 1U) -#define LINE_ADC1_IN11 PAL_LINE(GPIOC, 1U) -#define LINE_ARD_D9 PAL_LINE(GPIOC, 7U) -#define LINE_BUTTON PAL_LINE(GPIOC, 13U) -#define LINE_OSC32_IN PAL_LINE(GPIOC, 14U) -#define LINE_OSC32_OUT PAL_LINE(GPIOC, 15U) -#define LINE_OSC_IN PAL_LINE(GPIOH, 0U) -#define LINE_OSC_OUT PAL_LINE(GPIOH, 1U) - -/*===========================================================================*/ -/* Driver pre-compile time settings. */ -/*===========================================================================*/ - -/*===========================================================================*/ -/* Derived constants and error checks. */ -/*===========================================================================*/ - -/*===========================================================================*/ -/* Driver data structures and types. */ -/*===========================================================================*/ - -/*===========================================================================*/ -/* Driver macros. */ -/*===========================================================================*/ - -/* - * I/O ports initial setup, this configuration is established soon after reset - * in the initialization code. - * Please refer to the STM32 Reference Manual for details. - */ -#define PIN_MODE_INPUT(n) (0U << ((n)*2U)) -#define PIN_MODE_OUTPUT(n) (1U << ((n)*2U)) -#define PIN_MODE_ALTERNATE(n) (2U << ((n)*2U)) -#define PIN_MODE_ANALOG(n) (3U << ((n)*2U)) -#define PIN_ODR_LOW(n) (0U << (n)) -#define PIN_ODR_HIGH(n) (1U << (n)) -#define PIN_OTYPE_PUSHPULL(n) (0U << (n)) -#define PIN_OTYPE_OPENDRAIN(n) (1U << (n)) -#define PIN_OSPEED_VERYLOW(n) (0U << ((n)*2U)) -#define PIN_OSPEED_LOW(n) (1U << ((n)*2U)) -#define PIN_OSPEED_MEDIUM(n) (2U << ((n)*2U)) -#define PIN_OSPEED_HIGH(n) (3U << ((n)*2U)) -#define PIN_PUPDR_FLOATING(n) (0U << ((n)*2U)) -#define PIN_PUPDR_PULLUP(n) (1U << ((n)*2U)) -#define PIN_PUPDR_PULLDOWN(n) (2U << ((n)*2U)) -#define PIN_AFIO_AF(n, v) ((v) << (((n) % 8U) * 4U)) - -/* - * GPIOA setup: - * - * PA0 - ARD_A0 ADC1_IN0 (input pullup). - * PA1 - ARD_A1 ADC1_IN1 (input pullup). - * PA2 - ARD_D1 USART2_TX (alternate 7). - * PA3 - ARD_D0 USART2_RX (alternate 7). - * PA4 - ARD_A2 ADC1_IN4 (input pullup). - * PA5 - LED_GREEN ARD_D13 (output pushpull high). - * PA6 - ARD_D12 (input pullup). - * PA7 - ARD_D11 (input pullup). - * PA8 - ARD_D7 (input pullup). - * PA9 - ARD_D8 (input pullup). - * PA10 - ARD_D2 (input pullup). - * PA11 - OTG_FS_DM (alternate 10). - * PA12 - OTG_FS_DP (alternate 10). - * PA13 - SWDIO (alternate 0). - * PA14 - SWCLK (alternate 0). - * PA15 - PIN15 (input pullup). - */ -#define VAL_GPIOA_MODER (PIN_MODE_INPUT(GPIOA_ARD_A0) | PIN_MODE_INPUT(GPIOA_ARD_A1) | PIN_MODE_ALTERNATE(GPIOA_ARD_D1) | PIN_MODE_ALTERNATE(GPIOA_ARD_D0) | PIN_MODE_INPUT(GPIOA_ARD_A2) | PIN_MODE_OUTPUT(GPIOA_LED_GREEN) | PIN_MODE_INPUT(GPIOA_ARD_D12) | PIN_MODE_INPUT(GPIOA_ARD_D11) | PIN_MODE_INPUT(GPIOA_ARD_D7) | PIN_MODE_INPUT(GPIOA_ARD_D8) | PIN_MODE_INPUT(GPIOA_ARD_D2) | PIN_MODE_ALTERNATE(GPIOA_OTG_FS_DM) | PIN_MODE_ALTERNATE(GPIOA_OTG_FS_DP) | PIN_MODE_ALTERNATE(GPIOA_SWDIO) | PIN_MODE_ALTERNATE(GPIOA_SWCLK) | PIN_MODE_INPUT(GPIOA_PIN15)) -#define VAL_GPIOA_OTYPER (PIN_OTYPE_PUSHPULL(GPIOA_ARD_A0) | PIN_OTYPE_PUSHPULL(GPIOA_ARD_A1) | PIN_OTYPE_PUSHPULL(GPIOA_ARD_D1) | PIN_OTYPE_PUSHPULL(GPIOA_ARD_D0) | PIN_OTYPE_PUSHPULL(GPIOA_ARD_A2) | PIN_OTYPE_PUSHPULL(GPIOA_LED_GREEN) | PIN_OTYPE_PUSHPULL(GPIOA_ARD_D12) | PIN_OTYPE_PUSHPULL(GPIOA_ARD_D11) | PIN_OTYPE_PUSHPULL(GPIOA_ARD_D7) | PIN_OTYPE_PUSHPULL(GPIOA_ARD_D8) | PIN_OTYPE_PUSHPULL(GPIOA_ARD_D2) | PIN_OTYPE_PUSHPULL(GPIOA_OTG_FS_DM) | PIN_OTYPE_PUSHPULL(GPIOA_OTG_FS_DP) | PIN_OTYPE_PUSHPULL(GPIOA_SWDIO) | PIN_OTYPE_PUSHPULL(GPIOA_SWCLK) | PIN_OTYPE_PUSHPULL(GPIOA_PIN15)) -#define VAL_GPIOA_OSPEEDR (PIN_OSPEED_HIGH(GPIOA_ARD_A0) | PIN_OSPEED_HIGH(GPIOA_ARD_A1) | PIN_OSPEED_MEDIUM(GPIOA_ARD_D1) | PIN_OSPEED_MEDIUM(GPIOA_ARD_D0) | PIN_OSPEED_HIGH(GPIOA_ARD_A2) | PIN_OSPEED_MEDIUM(GPIOA_LED_GREEN) | PIN_OSPEED_HIGH(GPIOA_ARD_D12) | PIN_OSPEED_HIGH(GPIOA_ARD_D11) | PIN_OSPEED_HIGH(GPIOA_ARD_D7) | PIN_OSPEED_HIGH(GPIOA_ARD_D8) | PIN_OSPEED_HIGH(GPIOA_ARD_D2) | PIN_OSPEED_HIGH(GPIOA_OTG_FS_DM) | PIN_OSPEED_HIGH(GPIOA_OTG_FS_DP) | PIN_OSPEED_HIGH(GPIOA_SWDIO) | PIN_OSPEED_HIGH(GPIOA_SWCLK) | PIN_OSPEED_HIGH(GPIOA_PIN15)) -#define VAL_GPIOA_PUPDR (PIN_PUPDR_PULLUP(GPIOA_ARD_A0) | PIN_PUPDR_PULLUP(GPIOA_ARD_A1) | PIN_PUPDR_FLOATING(GPIOA_ARD_D1) | PIN_PUPDR_FLOATING(GPIOA_ARD_D0) | PIN_PUPDR_PULLUP(GPIOA_ARD_A2) | PIN_PUPDR_FLOATING(GPIOA_LED_GREEN) | PIN_PUPDR_PULLUP(GPIOA_ARD_D12) | PIN_PUPDR_PULLUP(GPIOA_ARD_D11) | PIN_PUPDR_PULLUP(GPIOA_ARD_D7) | PIN_PUPDR_PULLUP(GPIOA_ARD_D8) | PIN_PUPDR_PULLUP(GPIOA_ARD_D2) | PIN_PUPDR_FLOATING(GPIOA_OTG_FS_DM) | PIN_PUPDR_FLOATING(GPIOA_OTG_FS_DP) | PIN_PUPDR_PULLUP(GPIOA_SWDIO) | PIN_PUPDR_PULLDOWN(GPIOA_SWCLK) | PIN_PUPDR_PULLUP(GPIOA_PIN15)) -#define VAL_GPIOA_ODR (PIN_ODR_HIGH(GPIOA_ARD_A0) | PIN_ODR_HIGH(GPIOA_ARD_A1) | PIN_ODR_HIGH(GPIOA_ARD_D1) | PIN_ODR_HIGH(GPIOA_ARD_D0) | PIN_ODR_HIGH(GPIOA_ARD_A2) | PIN_ODR_LOW(GPIOA_LED_GREEN) | PIN_ODR_HIGH(GPIOA_ARD_D12) | PIN_ODR_HIGH(GPIOA_ARD_D11) | PIN_ODR_HIGH(GPIOA_ARD_D7) | PIN_ODR_HIGH(GPIOA_ARD_D8) | PIN_ODR_HIGH(GPIOA_ARD_D2) | PIN_ODR_HIGH(GPIOA_OTG_FS_DM) | PIN_ODR_HIGH(GPIOA_OTG_FS_DP) | PIN_ODR_HIGH(GPIOA_SWDIO) | PIN_ODR_HIGH(GPIOA_SWCLK) | PIN_ODR_HIGH(GPIOA_PIN15)) -#define VAL_GPIOA_AFRL (PIN_AFIO_AF(GPIOA_ARD_A0, 0U) | PIN_AFIO_AF(GPIOA_ARD_A1, 0U) | PIN_AFIO_AF(GPIOA_ARD_D1, 7U) | PIN_AFIO_AF(GPIOA_ARD_D0, 7U) | PIN_AFIO_AF(GPIOA_ARD_A2, 0U) | PIN_AFIO_AF(GPIOA_LED_GREEN, 0U) | PIN_AFIO_AF(GPIOA_ARD_D12, 0U) | PIN_AFIO_AF(GPIOA_ARD_D11, 0U)) -#define VAL_GPIOA_AFRH (PIN_AFIO_AF(GPIOA_ARD_D7, 0U) | PIN_AFIO_AF(GPIOA_ARD_D8, 0U) | PIN_AFIO_AF(GPIOA_ARD_D2, 0U) | PIN_AFIO_AF(GPIOA_OTG_FS_DM, 10U) | PIN_AFIO_AF(GPIOA_OTG_FS_DP, 10U) | PIN_AFIO_AF(GPIOA_SWDIO, 0U) | PIN_AFIO_AF(GPIOA_SWCLK, 0U) | PIN_AFIO_AF(GPIOA_PIN15, 0U)) - -/* - * GPIOB setup: - * - * PB0 - ARD_A3 ADC1_IN8 (input pullup). - * PB1 - PIN1 (input pullup). - * PB2 - PIN2 (input pullup). - * PB3 - SWO ARD_D3 (alternate 0). - * PB4 - ARD_D5 (input pullup). - * PB5 - ARD_D4 (input pullup). - * PB6 - ARD_D10 (input pullup). - * PB7 - PIN7 (input pullup). - * PB8 - ARD_D15 (input pullup). - * PB9 - ARD_D14 (input pullup). - * PB10 - ARD_D6 (input pullup). - * PB11 - PIN11 (input pullup). - * PB12 - PIN12 (input pullup). - * PB13 - PIN13 (input pullup). - * PB14 - PIN14 (input pullup). - * PB15 - PIN15 (input pullup). - */ -#define VAL_GPIOB_MODER (PIN_MODE_INPUT(GPIOB_ARD_A3) | PIN_MODE_INPUT(GPIOB_PIN1) | PIN_MODE_INPUT(GPIOB_PIN2) | PIN_MODE_ALTERNATE(GPIOB_SWO) | PIN_MODE_INPUT(GPIOB_ARD_D5) | PIN_MODE_INPUT(GPIOB_ARD_D4) | PIN_MODE_INPUT(GPIOB_ARD_D10) | PIN_MODE_INPUT(GPIOB_PIN7) | PIN_MODE_INPUT(GPIOB_ARD_D15) | PIN_MODE_INPUT(GPIOB_ARD_D14) | PIN_MODE_INPUT(GPIOB_ARD_D6) | PIN_MODE_INPUT(GPIOB_PIN11) | PIN_MODE_INPUT(GPIOB_PIN12) | PIN_MODE_INPUT(GPIOB_PIN13) | PIN_MODE_INPUT(GPIOB_PIN14) | PIN_MODE_INPUT(GPIOB_PIN15)) -#define VAL_GPIOB_OTYPER (PIN_OTYPE_PUSHPULL(GPIOB_ARD_A3) | PIN_OTYPE_PUSHPULL(GPIOB_PIN1) | PIN_OTYPE_PUSHPULL(GPIOB_PIN2) | PIN_OTYPE_PUSHPULL(GPIOB_SWO) | PIN_OTYPE_PUSHPULL(GPIOB_ARD_D5) | PIN_OTYPE_PUSHPULL(GPIOB_ARD_D4) | PIN_OTYPE_PUSHPULL(GPIOB_ARD_D10) | PIN_OTYPE_PUSHPULL(GPIOB_PIN7) | PIN_OTYPE_PUSHPULL(GPIOB_ARD_D15) | PIN_OTYPE_PUSHPULL(GPIOB_ARD_D14) | PIN_OTYPE_PUSHPULL(GPIOB_ARD_D6) | PIN_OTYPE_PUSHPULL(GPIOB_PIN11) | PIN_OTYPE_PUSHPULL(GPIOB_PIN12) | PIN_OTYPE_PUSHPULL(GPIOB_PIN13) | PIN_OTYPE_PUSHPULL(GPIOB_PIN14) | PIN_OTYPE_PUSHPULL(GPIOB_PIN15)) -#define VAL_GPIOB_OSPEEDR (PIN_OSPEED_HIGH(GPIOB_ARD_A3) | PIN_OSPEED_HIGH(GPIOB_PIN1) | PIN_OSPEED_HIGH(GPIOB_PIN2) | PIN_OSPEED_HIGH(GPIOB_SWO) | PIN_OSPEED_HIGH(GPIOB_ARD_D5) | PIN_OSPEED_HIGH(GPIOB_ARD_D4) | PIN_OSPEED_HIGH(GPIOB_ARD_D10) | PIN_OSPEED_HIGH(GPIOB_PIN7) | PIN_OSPEED_HIGH(GPIOB_ARD_D15) | PIN_OSPEED_HIGH(GPIOB_ARD_D14) | PIN_OSPEED_HIGH(GPIOB_ARD_D6) | PIN_OSPEED_HIGH(GPIOB_PIN11) | PIN_OSPEED_HIGH(GPIOB_PIN12) | PIN_OSPEED_HIGH(GPIOB_PIN13) | PIN_OSPEED_HIGH(GPIOB_PIN14) | PIN_OSPEED_HIGH(GPIOB_PIN15)) -#define VAL_GPIOB_PUPDR (PIN_PUPDR_PULLUP(GPIOB_ARD_A3) | PIN_PUPDR_PULLUP(GPIOB_PIN1) | PIN_PUPDR_PULLUP(GPIOB_PIN2) | PIN_PUPDR_PULLUP(GPIOB_SWO) | PIN_PUPDR_PULLUP(GPIOB_ARD_D5) | PIN_PUPDR_PULLUP(GPIOB_ARD_D4) | PIN_PUPDR_PULLUP(GPIOB_ARD_D10) | PIN_PUPDR_PULLUP(GPIOB_PIN7) | PIN_PUPDR_PULLUP(GPIOB_ARD_D15) | PIN_PUPDR_PULLUP(GPIOB_ARD_D14) | PIN_PUPDR_PULLUP(GPIOB_ARD_D6) | PIN_PUPDR_PULLUP(GPIOB_PIN11) | PIN_PUPDR_PULLUP(GPIOB_PIN12) | PIN_PUPDR_PULLUP(GPIOB_PIN13) | PIN_PUPDR_PULLUP(GPIOB_PIN14) | PIN_PUPDR_PULLUP(GPIOB_PIN15)) -#define VAL_GPIOB_ODR (PIN_ODR_HIGH(GPIOB_ARD_A3) | PIN_ODR_HIGH(GPIOB_PIN1) | PIN_ODR_HIGH(GPIOB_PIN2) | PIN_ODR_HIGH(GPIOB_SWO) | PIN_ODR_HIGH(GPIOB_ARD_D5) | PIN_ODR_HIGH(GPIOB_ARD_D4) | PIN_ODR_HIGH(GPIOB_ARD_D10) | PIN_ODR_HIGH(GPIOB_PIN7) | PIN_ODR_HIGH(GPIOB_ARD_D15) | PIN_ODR_HIGH(GPIOB_ARD_D14) | PIN_ODR_HIGH(GPIOB_ARD_D6) | PIN_ODR_HIGH(GPIOB_PIN11) | PIN_ODR_HIGH(GPIOB_PIN12) | PIN_ODR_HIGH(GPIOB_PIN13) | PIN_ODR_HIGH(GPIOB_PIN14) | PIN_ODR_HIGH(GPIOB_PIN15)) -#define VAL_GPIOB_AFRL (PIN_AFIO_AF(GPIOB_ARD_A3, 0U) | PIN_AFIO_AF(GPIOB_PIN1, 0U) | PIN_AFIO_AF(GPIOB_PIN2, 0U) | PIN_AFIO_AF(GPIOB_SWO, 0U) | PIN_AFIO_AF(GPIOB_ARD_D5, 0U) | PIN_AFIO_AF(GPIOB_ARD_D4, 0U) | PIN_AFIO_AF(GPIOB_ARD_D10, 0U) | PIN_AFIO_AF(GPIOB_PIN7, 0U)) -#define VAL_GPIOB_AFRH (PIN_AFIO_AF(GPIOB_ARD_D15, 0U) | PIN_AFIO_AF(GPIOB_ARD_D14, 0U) | PIN_AFIO_AF(GPIOB_ARD_D6, 0U) | PIN_AFIO_AF(GPIOB_PIN11, 0U) | PIN_AFIO_AF(GPIOB_PIN12, 0U) | PIN_AFIO_AF(GPIOB_PIN13, 0U) | PIN_AFIO_AF(GPIOB_PIN14, 0U) | PIN_AFIO_AF(GPIOB_PIN15, 0U)) - -/* - * GPIOC setup: - * - * PC0 - ARD_A5 ADC1_IN10 (input pullup). - * PC1 - ARD_A4 ADC1_IN11 (input pullup). - * PC2 - PIN2 (input pullup). - * PC3 - PIN3 (input pullup). - * PC4 - PIN4 (input pullup). - * PC5 - PIN5 (input pullup). - * PC6 - PIN6 (input pullup). - * PC7 - ARD_D9 (input pullup). - * PC8 - PIN8 (input pullup). - * PC9 - PIN9 (input pullup). - * PC10 - PIN10 (input pullup). - * PC11 - PIN11 (input pullup). - * PC12 - PIN12 (input pullup). - * PC13 - BUTTON (input floating). - * PC14 - OSC32_IN (input floating). - * PC15 - OSC32_OUT (input floating). - */ -#define VAL_GPIOC_MODER (PIN_MODE_INPUT(GPIOC_ARD_A5) | PIN_MODE_INPUT(GPIOC_ARD_A4) | PIN_MODE_INPUT(GPIOC_PIN2) | PIN_MODE_INPUT(GPIOC_PIN3) | PIN_MODE_INPUT(GPIOC_PIN4) | PIN_MODE_INPUT(GPIOC_PIN5) | PIN_MODE_INPUT(GPIOC_PIN6) | PIN_MODE_INPUT(GPIOC_ARD_D9) | PIN_MODE_INPUT(GPIOC_PIN8) | PIN_MODE_INPUT(GPIOC_PIN9) | PIN_MODE_INPUT(GPIOC_PIN10) | PIN_MODE_INPUT(GPIOC_PIN11) | PIN_MODE_INPUT(GPIOC_PIN12) | PIN_MODE_INPUT(GPIOC_BUTTON) | PIN_MODE_INPUT(GPIOC_OSC32_IN) | PIN_MODE_INPUT(GPIOC_OSC32_OUT)) -#define VAL_GPIOC_OTYPER (PIN_OTYPE_PUSHPULL(GPIOC_ARD_A5) | PIN_OTYPE_PUSHPULL(GPIOC_ARD_A4) | PIN_OTYPE_PUSHPULL(GPIOC_PIN2) | PIN_OTYPE_PUSHPULL(GPIOC_PIN3) | PIN_OTYPE_PUSHPULL(GPIOC_PIN4) | PIN_OTYPE_PUSHPULL(GPIOC_PIN5) | PIN_OTYPE_PUSHPULL(GPIOC_PIN6) | PIN_OTYPE_PUSHPULL(GPIOC_ARD_D9) | PIN_OTYPE_PUSHPULL(GPIOC_PIN8) | PIN_OTYPE_PUSHPULL(GPIOC_PIN9) | PIN_OTYPE_PUSHPULL(GPIOC_PIN10) | PIN_OTYPE_PUSHPULL(GPIOC_PIN11) | PIN_OTYPE_PUSHPULL(GPIOC_PIN12) | PIN_OTYPE_PUSHPULL(GPIOC_BUTTON) | PIN_OTYPE_PUSHPULL(GPIOC_OSC32_IN) | PIN_OTYPE_PUSHPULL(GPIOC_OSC32_OUT)) -#define VAL_GPIOC_OSPEEDR (PIN_OSPEED_HIGH(GPIOC_ARD_A5) | PIN_OSPEED_HIGH(GPIOC_ARD_A4) | PIN_OSPEED_HIGH(GPIOC_PIN2) | PIN_OSPEED_HIGH(GPIOC_PIN3) | PIN_OSPEED_HIGH(GPIOC_PIN4) | PIN_OSPEED_HIGH(GPIOC_PIN5) | PIN_OSPEED_HIGH(GPIOC_PIN6) | PIN_OSPEED_HIGH(GPIOC_ARD_D9) | PIN_OSPEED_HIGH(GPIOC_PIN8) | PIN_OSPEED_HIGH(GPIOC_PIN9) | PIN_OSPEED_HIGH(GPIOC_PIN10) | PIN_OSPEED_HIGH(GPIOC_PIN11) | PIN_OSPEED_HIGH(GPIOC_PIN12) | PIN_OSPEED_HIGH(GPIOC_BUTTON) | PIN_OSPEED_HIGH(GPIOC_OSC32_IN) | PIN_OSPEED_HIGH(GPIOC_OSC32_OUT)) -#define VAL_GPIOC_PUPDR (PIN_PUPDR_PULLUP(GPIOC_ARD_A5) | PIN_PUPDR_PULLUP(GPIOC_ARD_A4) | PIN_PUPDR_PULLUP(GPIOC_PIN2) | PIN_PUPDR_PULLUP(GPIOC_PIN3) | PIN_PUPDR_PULLUP(GPIOC_PIN4) | PIN_PUPDR_PULLUP(GPIOC_PIN5) | PIN_PUPDR_PULLUP(GPIOC_PIN6) | PIN_PUPDR_PULLUP(GPIOC_ARD_D9) | PIN_PUPDR_PULLUP(GPIOC_PIN8) | PIN_PUPDR_PULLUP(GPIOC_PIN9) | PIN_PUPDR_PULLUP(GPIOC_PIN10) | PIN_PUPDR_PULLUP(GPIOC_PIN11) | PIN_PUPDR_PULLUP(GPIOC_PIN12) | PIN_PUPDR_FLOATING(GPIOC_BUTTON) | PIN_PUPDR_FLOATING(GPIOC_OSC32_IN) | PIN_PUPDR_FLOATING(GPIOC_OSC32_OUT)) -#define VAL_GPIOC_ODR (PIN_ODR_HIGH(GPIOC_ARD_A5) | PIN_ODR_HIGH(GPIOC_ARD_A4) | PIN_ODR_HIGH(GPIOC_PIN2) | PIN_ODR_HIGH(GPIOC_PIN3) | PIN_ODR_HIGH(GPIOC_PIN4) | PIN_ODR_HIGH(GPIOC_PIN5) | PIN_ODR_HIGH(GPIOC_PIN6) | PIN_ODR_HIGH(GPIOC_ARD_D9) | PIN_ODR_HIGH(GPIOC_PIN8) | PIN_ODR_HIGH(GPIOC_PIN9) | PIN_ODR_HIGH(GPIOC_PIN10) | PIN_ODR_HIGH(GPIOC_PIN11) | PIN_ODR_HIGH(GPIOC_PIN12) | PIN_ODR_HIGH(GPIOC_BUTTON) | PIN_ODR_HIGH(GPIOC_OSC32_IN) | PIN_ODR_HIGH(GPIOC_OSC32_OUT)) -#define VAL_GPIOC_AFRL (PIN_AFIO_AF(GPIOC_ARD_A5, 0U) | PIN_AFIO_AF(GPIOC_ARD_A4, 0U) | PIN_AFIO_AF(GPIOC_PIN2, 0U) | PIN_AFIO_AF(GPIOC_PIN3, 0U) | PIN_AFIO_AF(GPIOC_PIN4, 0U) | PIN_AFIO_AF(GPIOC_PIN5, 0U) | PIN_AFIO_AF(GPIOC_PIN6, 0U) | PIN_AFIO_AF(GPIOC_ARD_D9, 0U)) -#define VAL_GPIOC_AFRH (PIN_AFIO_AF(GPIOC_PIN8, 0U) | PIN_AFIO_AF(GPIOC_PIN9, 0U) | PIN_AFIO_AF(GPIOC_PIN10, 0U) | PIN_AFIO_AF(GPIOC_PIN11, 0U) | PIN_AFIO_AF(GPIOC_PIN12, 0U) | PIN_AFIO_AF(GPIOC_BUTTON, 0U) | PIN_AFIO_AF(GPIOC_OSC32_IN, 0U) | PIN_AFIO_AF(GPIOC_OSC32_OUT, 0U)) - -/* - * GPIOD setup: - * - * PD0 - PIN0 (input pullup). - * PD1 - PIN1 (input pullup). - * PD2 - PIN2 (input pullup). - * PD3 - PIN3 (input pullup). - * PD4 - PIN4 (input pullup). - * PD5 - PIN5 (input pullup). - * PD6 - PIN6 (input pullup). - * PD7 - PIN7 (input pullup). - * PD8 - PIN8 (input pullup). - * PD9 - PIN9 (input pullup). - * PD10 - PIN10 (input pullup). - * PD11 - PIN11 (input pullup). - * PD12 - PIN12 (input pullup). - * PD13 - PIN13 (input pullup). - * PD14 - PIN14 (input pullup). - * PD15 - PIN15 (input pullup). - */ -#define VAL_GPIOD_MODER (PIN_MODE_INPUT(GPIOD_PIN0) | PIN_MODE_INPUT(GPIOD_PIN1) | PIN_MODE_INPUT(GPIOD_PIN2) | PIN_MODE_INPUT(GPIOD_PIN3) | PIN_MODE_INPUT(GPIOD_PIN4) | PIN_MODE_INPUT(GPIOD_PIN5) | PIN_MODE_INPUT(GPIOD_PIN6) | PIN_MODE_INPUT(GPIOD_PIN7) | PIN_MODE_INPUT(GPIOD_PIN8) | PIN_MODE_INPUT(GPIOD_PIN9) | PIN_MODE_INPUT(GPIOD_PIN10) | PIN_MODE_INPUT(GPIOD_PIN11) | PIN_MODE_INPUT(GPIOD_PIN12) | PIN_MODE_INPUT(GPIOD_PIN13) | PIN_MODE_INPUT(GPIOD_PIN14) | PIN_MODE_INPUT(GPIOD_PIN15)) -#define VAL_GPIOD_OTYPER (PIN_OTYPE_PUSHPULL(GPIOD_PIN0) | PIN_OTYPE_PUSHPULL(GPIOD_PIN1) | PIN_OTYPE_PUSHPULL(GPIOD_PIN2) | PIN_OTYPE_PUSHPULL(GPIOD_PIN3) | PIN_OTYPE_PUSHPULL(GPIOD_PIN4) | PIN_OTYPE_PUSHPULL(GPIOD_PIN5) | PIN_OTYPE_PUSHPULL(GPIOD_PIN6) | PIN_OTYPE_PUSHPULL(GPIOD_PIN7) | PIN_OTYPE_PUSHPULL(GPIOD_PIN8) | PIN_OTYPE_PUSHPULL(GPIOD_PIN9) | PIN_OTYPE_PUSHPULL(GPIOD_PIN10) | PIN_OTYPE_PUSHPULL(GPIOD_PIN11) | PIN_OTYPE_PUSHPULL(GPIOD_PIN12) | PIN_OTYPE_PUSHPULL(GPIOD_PIN13) | PIN_OTYPE_PUSHPULL(GPIOD_PIN14) | PIN_OTYPE_PUSHPULL(GPIOD_PIN15)) -#define VAL_GPIOD_OSPEEDR (PIN_OSPEED_HIGH(GPIOD_PIN0) | PIN_OSPEED_HIGH(GPIOD_PIN1) | PIN_OSPEED_HIGH(GPIOD_PIN2) | PIN_OSPEED_HIGH(GPIOD_PIN3) | PIN_OSPEED_HIGH(GPIOD_PIN4) | PIN_OSPEED_HIGH(GPIOD_PIN5) | PIN_OSPEED_HIGH(GPIOD_PIN6) | PIN_OSPEED_HIGH(GPIOD_PIN7) | PIN_OSPEED_HIGH(GPIOD_PIN8) | PIN_OSPEED_HIGH(GPIOD_PIN9) | PIN_OSPEED_HIGH(GPIOD_PIN10) | PIN_OSPEED_HIGH(GPIOD_PIN11) | PIN_OSPEED_HIGH(GPIOD_PIN12) | PIN_OSPEED_HIGH(GPIOD_PIN13) | PIN_OSPEED_HIGH(GPIOD_PIN14) | PIN_OSPEED_HIGH(GPIOD_PIN15)) -#define VAL_GPIOD_PUPDR (PIN_PUPDR_PULLUP(GPIOD_PIN0) | PIN_PUPDR_PULLUP(GPIOD_PIN1) | PIN_PUPDR_PULLUP(GPIOD_PIN2) | PIN_PUPDR_PULLUP(GPIOD_PIN3) | PIN_PUPDR_PULLUP(GPIOD_PIN4) | PIN_PUPDR_PULLUP(GPIOD_PIN5) | PIN_PUPDR_PULLUP(GPIOD_PIN6) | PIN_PUPDR_PULLUP(GPIOD_PIN7) | PIN_PUPDR_PULLUP(GPIOD_PIN8) | PIN_PUPDR_PULLUP(GPIOD_PIN9) | PIN_PUPDR_PULLUP(GPIOD_PIN10) | PIN_PUPDR_PULLUP(GPIOD_PIN11) | PIN_PUPDR_PULLUP(GPIOD_PIN12) | PIN_PUPDR_PULLUP(GPIOD_PIN13) | PIN_PUPDR_PULLUP(GPIOD_PIN14) | PIN_PUPDR_PULLUP(GPIOD_PIN15)) -#define VAL_GPIOD_ODR (PIN_ODR_HIGH(GPIOD_PIN0) | PIN_ODR_HIGH(GPIOD_PIN1) | PIN_ODR_HIGH(GPIOD_PIN2) | PIN_ODR_HIGH(GPIOD_PIN3) | PIN_ODR_HIGH(GPIOD_PIN4) | PIN_ODR_HIGH(GPIOD_PIN5) | PIN_ODR_HIGH(GPIOD_PIN6) | PIN_ODR_HIGH(GPIOD_PIN7) | PIN_ODR_HIGH(GPIOD_PIN8) | PIN_ODR_HIGH(GPIOD_PIN9) | PIN_ODR_HIGH(GPIOD_PIN10) | PIN_ODR_HIGH(GPIOD_PIN11) | PIN_ODR_HIGH(GPIOD_PIN12) | PIN_ODR_HIGH(GPIOD_PIN13) | PIN_ODR_HIGH(GPIOD_PIN14) | PIN_ODR_HIGH(GPIOD_PIN15)) -#define VAL_GPIOD_AFRL (PIN_AFIO_AF(GPIOD_PIN0, 0U) | PIN_AFIO_AF(GPIOD_PIN1, 0U) | PIN_AFIO_AF(GPIOD_PIN2, 0U) | PIN_AFIO_AF(GPIOD_PIN3, 0U) | PIN_AFIO_AF(GPIOD_PIN4, 0U) | PIN_AFIO_AF(GPIOD_PIN5, 0U) | PIN_AFIO_AF(GPIOD_PIN6, 0U) | PIN_AFIO_AF(GPIOD_PIN7, 0U)) -#define VAL_GPIOD_AFRH (PIN_AFIO_AF(GPIOD_PIN8, 0U) | PIN_AFIO_AF(GPIOD_PIN9, 0U) | PIN_AFIO_AF(GPIOD_PIN10, 0U) | PIN_AFIO_AF(GPIOD_PIN11, 0U) | PIN_AFIO_AF(GPIOD_PIN12, 0U) | PIN_AFIO_AF(GPIOD_PIN13, 0U) | PIN_AFIO_AF(GPIOD_PIN14, 0U) | PIN_AFIO_AF(GPIOD_PIN15, 0U)) - -/* - * GPIOE setup: - * - * PE0 - PIN0 (input pullup). - * PE1 - PIN1 (input pullup). - * PE2 - PIN2 (input pullup). - * PE3 - PIN3 (input pullup). - * PE4 - PIN4 (input pullup). - * PE5 - PIN5 (input pullup). - * PE6 - PIN6 (input pullup). - * PE7 - PIN7 (input pullup). - * PE8 - PIN8 (input pullup). - * PE9 - PIN9 (input pullup). - * PE10 - PIN10 (input pullup). - * PE11 - PIN11 (input pullup). - * PE12 - PIN12 (input pullup). - * PE13 - PIN13 (input pullup). - * PE14 - PIN14 (input pullup). - * PE15 - PIN15 (input pullup). - */ -#define VAL_GPIOE_MODER (PIN_MODE_INPUT(GPIOE_PIN0) | PIN_MODE_INPUT(GPIOE_PIN1) | PIN_MODE_INPUT(GPIOE_PIN2) | PIN_MODE_INPUT(GPIOE_PIN3) | PIN_MODE_INPUT(GPIOE_PIN4) | PIN_MODE_INPUT(GPIOE_PIN5) | PIN_MODE_INPUT(GPIOE_PIN6) | PIN_MODE_INPUT(GPIOE_PIN7) | PIN_MODE_INPUT(GPIOE_PIN8) | PIN_MODE_INPUT(GPIOE_PIN9) | PIN_MODE_INPUT(GPIOE_PIN10) | PIN_MODE_INPUT(GPIOE_PIN11) | PIN_MODE_INPUT(GPIOE_PIN12) | PIN_MODE_INPUT(GPIOE_PIN13) | PIN_MODE_INPUT(GPIOE_PIN14) | PIN_MODE_INPUT(GPIOE_PIN15)) -#define VAL_GPIOE_OTYPER (PIN_OTYPE_PUSHPULL(GPIOE_PIN0) | PIN_OTYPE_PUSHPULL(GPIOE_PIN1) | PIN_OTYPE_PUSHPULL(GPIOE_PIN2) | PIN_OTYPE_PUSHPULL(GPIOE_PIN3) | PIN_OTYPE_PUSHPULL(GPIOE_PIN4) | PIN_OTYPE_PUSHPULL(GPIOE_PIN5) | PIN_OTYPE_PUSHPULL(GPIOE_PIN6) | PIN_OTYPE_PUSHPULL(GPIOE_PIN7) | PIN_OTYPE_PUSHPULL(GPIOE_PIN8) | PIN_OTYPE_PUSHPULL(GPIOE_PIN9) | PIN_OTYPE_PUSHPULL(GPIOE_PIN10) | PIN_OTYPE_PUSHPULL(GPIOE_PIN11) | PIN_OTYPE_PUSHPULL(GPIOE_PIN12) | PIN_OTYPE_PUSHPULL(GPIOE_PIN13) | PIN_OTYPE_PUSHPULL(GPIOE_PIN14) | PIN_OTYPE_PUSHPULL(GPIOE_PIN15)) -#define VAL_GPIOE_OSPEEDR (PIN_OSPEED_HIGH(GPIOE_PIN0) | PIN_OSPEED_HIGH(GPIOE_PIN1) | PIN_OSPEED_HIGH(GPIOE_PIN2) | PIN_OSPEED_HIGH(GPIOE_PIN3) | PIN_OSPEED_HIGH(GPIOE_PIN4) | PIN_OSPEED_HIGH(GPIOE_PIN5) | PIN_OSPEED_HIGH(GPIOE_PIN6) | PIN_OSPEED_HIGH(GPIOE_PIN7) | PIN_OSPEED_HIGH(GPIOE_PIN8) | PIN_OSPEED_HIGH(GPIOE_PIN9) | PIN_OSPEED_HIGH(GPIOE_PIN10) | PIN_OSPEED_HIGH(GPIOE_PIN11) | PIN_OSPEED_HIGH(GPIOE_PIN12) | PIN_OSPEED_HIGH(GPIOE_PIN13) | PIN_OSPEED_HIGH(GPIOE_PIN14) | PIN_OSPEED_HIGH(GPIOE_PIN15)) -#define VAL_GPIOE_PUPDR (PIN_PUPDR_PULLUP(GPIOE_PIN0) | PIN_PUPDR_PULLUP(GPIOE_PIN1) | PIN_PUPDR_PULLUP(GPIOE_PIN2) | PIN_PUPDR_PULLUP(GPIOE_PIN3) | PIN_PUPDR_PULLUP(GPIOE_PIN4) | PIN_PUPDR_PULLUP(GPIOE_PIN5) | PIN_PUPDR_PULLUP(GPIOE_PIN6) | PIN_PUPDR_PULLUP(GPIOE_PIN7) | PIN_PUPDR_PULLUP(GPIOE_PIN8) | PIN_PUPDR_PULLUP(GPIOE_PIN9) | PIN_PUPDR_PULLUP(GPIOE_PIN10) | PIN_PUPDR_PULLUP(GPIOE_PIN11) | PIN_PUPDR_PULLUP(GPIOE_PIN12) | PIN_PUPDR_PULLUP(GPIOE_PIN13) | PIN_PUPDR_PULLUP(GPIOE_PIN14) | PIN_PUPDR_PULLUP(GPIOE_PIN15)) -#define VAL_GPIOE_ODR (PIN_ODR_HIGH(GPIOE_PIN0) | PIN_ODR_HIGH(GPIOE_PIN1) | PIN_ODR_HIGH(GPIOE_PIN2) | PIN_ODR_HIGH(GPIOE_PIN3) | PIN_ODR_HIGH(GPIOE_PIN4) | PIN_ODR_HIGH(GPIOE_PIN5) | PIN_ODR_HIGH(GPIOE_PIN6) | PIN_ODR_HIGH(GPIOE_PIN7) | PIN_ODR_HIGH(GPIOE_PIN8) | PIN_ODR_HIGH(GPIOE_PIN9) | PIN_ODR_HIGH(GPIOE_PIN10) | PIN_ODR_HIGH(GPIOE_PIN11) | PIN_ODR_HIGH(GPIOE_PIN12) | PIN_ODR_HIGH(GPIOE_PIN13) | PIN_ODR_HIGH(GPIOE_PIN14) | PIN_ODR_HIGH(GPIOE_PIN15)) -#define VAL_GPIOE_AFRL (PIN_AFIO_AF(GPIOE_PIN0, 0U) | PIN_AFIO_AF(GPIOE_PIN1, 0U) | PIN_AFIO_AF(GPIOE_PIN2, 0U) | PIN_AFIO_AF(GPIOE_PIN3, 0U) | PIN_AFIO_AF(GPIOE_PIN4, 0U) | PIN_AFIO_AF(GPIOE_PIN5, 0U) | PIN_AFIO_AF(GPIOE_PIN6, 0U) | PIN_AFIO_AF(GPIOE_PIN7, 0U)) -#define VAL_GPIOE_AFRH (PIN_AFIO_AF(GPIOE_PIN8, 0U) | PIN_AFIO_AF(GPIOE_PIN9, 0U) | PIN_AFIO_AF(GPIOE_PIN10, 0U) | PIN_AFIO_AF(GPIOE_PIN11, 0U) | PIN_AFIO_AF(GPIOE_PIN12, 0U) | PIN_AFIO_AF(GPIOE_PIN13, 0U) | PIN_AFIO_AF(GPIOE_PIN14, 0U) | PIN_AFIO_AF(GPIOE_PIN15, 0U)) - -/* - * GPIOF setup: - * - * PF0 - PIN0 (input pullup). - * PF1 - PIN1 (input pullup). - * PF2 - PIN2 (input pullup). - * PF3 - PIN3 (input pullup). - * PF4 - PIN4 (input pullup). - * PF5 - PIN5 (input pullup). - * PF6 - PIN6 (input pullup). - * PF7 - PIN7 (input pullup). - * PF8 - PIN8 (input pullup). - * PF9 - PIN9 (input pullup). - * PF10 - PIN10 (input pullup). - * PF11 - PIN11 (input pullup). - * PF12 - PIN12 (input pullup). - * PF13 - PIN13 (input pullup). - * PF14 - PIN14 (input pullup). - * PF15 - PIN15 (input pullup). - */ -#define VAL_GPIOF_MODER (PIN_MODE_INPUT(GPIOF_PIN0) | PIN_MODE_INPUT(GPIOF_PIN1) | PIN_MODE_INPUT(GPIOF_PIN2) | PIN_MODE_INPUT(GPIOF_PIN3) | PIN_MODE_INPUT(GPIOF_PIN4) | PIN_MODE_INPUT(GPIOF_PIN5) | PIN_MODE_INPUT(GPIOF_PIN6) | PIN_MODE_INPUT(GPIOF_PIN7) | PIN_MODE_INPUT(GPIOF_PIN8) | PIN_MODE_INPUT(GPIOF_PIN9) | PIN_MODE_INPUT(GPIOF_PIN10) | PIN_MODE_INPUT(GPIOF_PIN11) | PIN_MODE_INPUT(GPIOF_PIN12) | PIN_MODE_INPUT(GPIOF_PIN13) | PIN_MODE_INPUT(GPIOF_PIN14) | PIN_MODE_INPUT(GPIOF_PIN15)) -#define VAL_GPIOF_OTYPER (PIN_OTYPE_PUSHPULL(GPIOF_PIN0) | PIN_OTYPE_PUSHPULL(GPIOF_PIN1) | PIN_OTYPE_PUSHPULL(GPIOF_PIN2) | PIN_OTYPE_PUSHPULL(GPIOF_PIN3) | PIN_OTYPE_PUSHPULL(GPIOF_PIN4) | PIN_OTYPE_PUSHPULL(GPIOF_PIN5) | PIN_OTYPE_PUSHPULL(GPIOF_PIN6) | PIN_OTYPE_PUSHPULL(GPIOF_PIN7) | PIN_OTYPE_PUSHPULL(GPIOF_PIN8) | PIN_OTYPE_PUSHPULL(GPIOF_PIN9) | PIN_OTYPE_PUSHPULL(GPIOF_PIN10) | PIN_OTYPE_PUSHPULL(GPIOF_PIN11) | PIN_OTYPE_PUSHPULL(GPIOF_PIN12) | PIN_OTYPE_PUSHPULL(GPIOF_PIN13) | PIN_OTYPE_PUSHPULL(GPIOF_PIN14) | PIN_OTYPE_PUSHPULL(GPIOF_PIN15)) -#define VAL_GPIOF_OSPEEDR (PIN_OSPEED_HIGH(GPIOF_PIN0) | PIN_OSPEED_HIGH(GPIOF_PIN1) | PIN_OSPEED_HIGH(GPIOF_PIN2) | PIN_OSPEED_HIGH(GPIOF_PIN3) | PIN_OSPEED_HIGH(GPIOF_PIN4) | PIN_OSPEED_HIGH(GPIOF_PIN5) | PIN_OSPEED_HIGH(GPIOF_PIN6) | PIN_OSPEED_HIGH(GPIOF_PIN7) | PIN_OSPEED_HIGH(GPIOF_PIN8) | PIN_OSPEED_HIGH(GPIOF_PIN9) | PIN_OSPEED_HIGH(GPIOF_PIN10) | PIN_OSPEED_HIGH(GPIOF_PIN11) | PIN_OSPEED_HIGH(GPIOF_PIN12) | PIN_OSPEED_HIGH(GPIOF_PIN13) | PIN_OSPEED_HIGH(GPIOF_PIN14) | PIN_OSPEED_HIGH(GPIOF_PIN15)) -#define VAL_GPIOF_PUPDR (PIN_PUPDR_PULLUP(GPIOF_PIN0) | PIN_PUPDR_PULLUP(GPIOF_PIN1) | PIN_PUPDR_PULLUP(GPIOF_PIN2) | PIN_PUPDR_PULLUP(GPIOF_PIN3) | PIN_PUPDR_PULLUP(GPIOF_PIN4) | PIN_PUPDR_PULLUP(GPIOF_PIN5) | PIN_PUPDR_PULLUP(GPIOF_PIN6) | PIN_PUPDR_PULLUP(GPIOF_PIN7) | PIN_PUPDR_PULLUP(GPIOF_PIN8) | PIN_PUPDR_PULLUP(GPIOF_PIN9) | PIN_PUPDR_PULLUP(GPIOF_PIN10) | PIN_PUPDR_PULLUP(GPIOF_PIN11) | PIN_PUPDR_PULLUP(GPIOF_PIN12) | PIN_PUPDR_PULLUP(GPIOF_PIN13) | PIN_PUPDR_PULLUP(GPIOF_PIN14) | PIN_PUPDR_PULLUP(GPIOF_PIN15)) -#define VAL_GPIOF_ODR (PIN_ODR_HIGH(GPIOF_PIN0) | PIN_ODR_HIGH(GPIOF_PIN1) | PIN_ODR_HIGH(GPIOF_PIN2) | PIN_ODR_HIGH(GPIOF_PIN3) | PIN_ODR_HIGH(GPIOF_PIN4) | PIN_ODR_HIGH(GPIOF_PIN5) | PIN_ODR_HIGH(GPIOF_PIN6) | PIN_ODR_HIGH(GPIOF_PIN7) | PIN_ODR_HIGH(GPIOF_PIN8) | PIN_ODR_HIGH(GPIOF_PIN9) | PIN_ODR_HIGH(GPIOF_PIN10) | PIN_ODR_HIGH(GPIOF_PIN11) | PIN_ODR_HIGH(GPIOF_PIN12) | PIN_ODR_HIGH(GPIOF_PIN13) | PIN_ODR_HIGH(GPIOF_PIN14) | PIN_ODR_HIGH(GPIOF_PIN15)) -#define VAL_GPIOF_AFRL (PIN_AFIO_AF(GPIOF_PIN0, 0U) | PIN_AFIO_AF(GPIOF_PIN1, 0U) | PIN_AFIO_AF(GPIOF_PIN2, 0U) | PIN_AFIO_AF(GPIOF_PIN3, 0U) | PIN_AFIO_AF(GPIOF_PIN4, 0U) | PIN_AFIO_AF(GPIOF_PIN5, 0U) | PIN_AFIO_AF(GPIOF_PIN6, 0U) | PIN_AFIO_AF(GPIOF_PIN7, 0U)) -#define VAL_GPIOF_AFRH (PIN_AFIO_AF(GPIOF_PIN8, 0U) | PIN_AFIO_AF(GPIOF_PIN9, 0U) | PIN_AFIO_AF(GPIOF_PIN10, 0U) | PIN_AFIO_AF(GPIOF_PIN11, 0U) | PIN_AFIO_AF(GPIOF_PIN12, 0U) | PIN_AFIO_AF(GPIOF_PIN13, 0U) | PIN_AFIO_AF(GPIOF_PIN14, 0U) | PIN_AFIO_AF(GPIOF_PIN15, 0U)) - -/* - * GPIOG setup: - * - * PG0 - PIN0 (input pullup). - * PG1 - PIN1 (input pullup). - * PG2 - PIN2 (input pullup). - * PG3 - PIN3 (input pullup). - * PG4 - PIN4 (input pullup). - * PG5 - PIN5 (input pullup). - * PG6 - PIN6 (input pullup). - * PG7 - PIN7 (input pullup). - * PG8 - PIN8 (input pullup). - * PG9 - PIN9 (input pullup). - * PG10 - PIN10 (input pullup). - * PG11 - PIN11 (input pullup). - * PG12 - PIN12 (input pullup). - * PG13 - PIN13 (input pullup). - * PG14 - PIN14 (input pullup). - * PG15 - PIN15 (input pullup). - */ -#define VAL_GPIOG_MODER (PIN_MODE_INPUT(GPIOG_PIN0) | PIN_MODE_INPUT(GPIOG_PIN1) | PIN_MODE_INPUT(GPIOG_PIN2) | PIN_MODE_INPUT(GPIOG_PIN3) | PIN_MODE_INPUT(GPIOG_PIN4) | PIN_MODE_INPUT(GPIOG_PIN5) | PIN_MODE_INPUT(GPIOG_PIN6) | PIN_MODE_INPUT(GPIOG_PIN7) | PIN_MODE_INPUT(GPIOG_PIN8) | PIN_MODE_INPUT(GPIOG_PIN9) | PIN_MODE_INPUT(GPIOG_PIN10) | PIN_MODE_INPUT(GPIOG_PIN11) | PIN_MODE_INPUT(GPIOG_PIN12) | PIN_MODE_INPUT(GPIOG_PIN13) | PIN_MODE_INPUT(GPIOG_PIN14) | PIN_MODE_INPUT(GPIOG_PIN15)) -#define VAL_GPIOG_OTYPER (PIN_OTYPE_PUSHPULL(GPIOG_PIN0) | PIN_OTYPE_PUSHPULL(GPIOG_PIN1) | PIN_OTYPE_PUSHPULL(GPIOG_PIN2) | PIN_OTYPE_PUSHPULL(GPIOG_PIN3) | PIN_OTYPE_PUSHPULL(GPIOG_PIN4) | PIN_OTYPE_PUSHPULL(GPIOG_PIN5) | PIN_OTYPE_PUSHPULL(GPIOG_PIN6) | PIN_OTYPE_PUSHPULL(GPIOG_PIN7) | PIN_OTYPE_PUSHPULL(GPIOG_PIN8) | PIN_OTYPE_PUSHPULL(GPIOG_PIN9) | PIN_OTYPE_PUSHPULL(GPIOG_PIN10) | PIN_OTYPE_PUSHPULL(GPIOG_PIN11) | PIN_OTYPE_PUSHPULL(GPIOG_PIN12) | PIN_OTYPE_PUSHPULL(GPIOG_PIN13) | PIN_OTYPE_PUSHPULL(GPIOG_PIN14) | PIN_OTYPE_PUSHPULL(GPIOG_PIN15)) -#define VAL_GPIOG_OSPEEDR (PIN_OSPEED_HIGH(GPIOG_PIN0) | PIN_OSPEED_HIGH(GPIOG_PIN1) | PIN_OSPEED_HIGH(GPIOG_PIN2) | PIN_OSPEED_HIGH(GPIOG_PIN3) | PIN_OSPEED_HIGH(GPIOG_PIN4) | PIN_OSPEED_HIGH(GPIOG_PIN5) | PIN_OSPEED_HIGH(GPIOG_PIN6) | PIN_OSPEED_HIGH(GPIOG_PIN7) | PIN_OSPEED_HIGH(GPIOG_PIN8) | PIN_OSPEED_HIGH(GPIOG_PIN9) | PIN_OSPEED_HIGH(GPIOG_PIN10) | PIN_OSPEED_HIGH(GPIOG_PIN11) | PIN_OSPEED_HIGH(GPIOG_PIN12) | PIN_OSPEED_HIGH(GPIOG_PIN13) | PIN_OSPEED_HIGH(GPIOG_PIN14) | PIN_OSPEED_HIGH(GPIOG_PIN15)) -#define VAL_GPIOG_PUPDR (PIN_PUPDR_PULLUP(GPIOG_PIN0) | PIN_PUPDR_PULLUP(GPIOG_PIN1) | PIN_PUPDR_PULLUP(GPIOG_PIN2) | PIN_PUPDR_PULLUP(GPIOG_PIN3) | PIN_PUPDR_PULLUP(GPIOG_PIN4) | PIN_PUPDR_PULLUP(GPIOG_PIN5) | PIN_PUPDR_PULLUP(GPIOG_PIN6) | PIN_PUPDR_PULLUP(GPIOG_PIN7) | PIN_PUPDR_PULLUP(GPIOG_PIN8) | PIN_PUPDR_PULLUP(GPIOG_PIN9) | PIN_PUPDR_PULLUP(GPIOG_PIN10) | PIN_PUPDR_PULLUP(GPIOG_PIN11) | PIN_PUPDR_PULLUP(GPIOG_PIN12) | PIN_PUPDR_PULLUP(GPIOG_PIN13) | PIN_PUPDR_PULLUP(GPIOG_PIN14) | PIN_PUPDR_PULLUP(GPIOG_PIN15)) -#define VAL_GPIOG_ODR (PIN_ODR_HIGH(GPIOG_PIN0) | PIN_ODR_HIGH(GPIOG_PIN1) | PIN_ODR_HIGH(GPIOG_PIN2) | PIN_ODR_HIGH(GPIOG_PIN3) | PIN_ODR_HIGH(GPIOG_PIN4) | PIN_ODR_HIGH(GPIOG_PIN5) | PIN_ODR_HIGH(GPIOG_PIN6) | PIN_ODR_HIGH(GPIOG_PIN7) | PIN_ODR_HIGH(GPIOG_PIN8) | PIN_ODR_HIGH(GPIOG_PIN9) | PIN_ODR_HIGH(GPIOG_PIN10) | PIN_ODR_HIGH(GPIOG_PIN11) | PIN_ODR_HIGH(GPIOG_PIN12) | PIN_ODR_HIGH(GPIOG_PIN13) | PIN_ODR_HIGH(GPIOG_PIN14) | PIN_ODR_HIGH(GPIOG_PIN15)) -#define VAL_GPIOG_AFRL (PIN_AFIO_AF(GPIOG_PIN0, 0U) | PIN_AFIO_AF(GPIOG_PIN1, 0U) | PIN_AFIO_AF(GPIOG_PIN2, 0U) | PIN_AFIO_AF(GPIOG_PIN3, 0U) | PIN_AFIO_AF(GPIOG_PIN4, 0U) | PIN_AFIO_AF(GPIOG_PIN5, 0U) | PIN_AFIO_AF(GPIOG_PIN6, 0U) | PIN_AFIO_AF(GPIOG_PIN7, 0U)) -#define VAL_GPIOG_AFRH (PIN_AFIO_AF(GPIOG_PIN8, 0U) | PIN_AFIO_AF(GPIOG_PIN9, 0U) | PIN_AFIO_AF(GPIOG_PIN10, 0U) | PIN_AFIO_AF(GPIOG_PIN11, 0U) | PIN_AFIO_AF(GPIOG_PIN12, 0U) | PIN_AFIO_AF(GPIOG_PIN13, 0U) | PIN_AFIO_AF(GPIOG_PIN14, 0U) | PIN_AFIO_AF(GPIOG_PIN15, 0U)) - -/* - * GPIOH setup: - * - * PH0 - OSC_IN (input floating). - * PH1 - OSC_OUT (input floating). - * PH2 - PIN2 (input pullup). - * PH3 - PIN3 (input pullup). - * PH4 - PIN4 (input pullup). - * PH5 - PIN5 (input pullup). - * PH6 - PIN6 (input pullup). - * PH7 - PIN7 (input pullup). - * PH8 - PIN8 (input pullup). - * PH9 - PIN9 (input pullup). - * PH10 - PIN10 (input pullup). - * PH11 - PIN11 (input pullup). - * PH12 - PIN12 (input pullup). - * PH13 - PIN13 (input pullup). - * PH14 - PIN14 (input pullup). - * PH15 - PIN15 (input pullup). - */ -#define VAL_GPIOH_MODER (PIN_MODE_INPUT(GPIOH_OSC_IN) | PIN_MODE_INPUT(GPIOH_OSC_OUT) | PIN_MODE_INPUT(GPIOH_PIN2) | PIN_MODE_INPUT(GPIOH_PIN3) | PIN_MODE_INPUT(GPIOH_PIN4) | PIN_MODE_INPUT(GPIOH_PIN5) | PIN_MODE_INPUT(GPIOH_PIN6) | PIN_MODE_INPUT(GPIOH_PIN7) | PIN_MODE_INPUT(GPIOH_PIN8) | PIN_MODE_INPUT(GPIOH_PIN9) | PIN_MODE_INPUT(GPIOH_PIN10) | PIN_MODE_INPUT(GPIOH_PIN11) | PIN_MODE_INPUT(GPIOH_PIN12) | PIN_MODE_INPUT(GPIOH_PIN13) | PIN_MODE_INPUT(GPIOH_PIN14) | PIN_MODE_INPUT(GPIOH_PIN15)) -#define VAL_GPIOH_OTYPER (PIN_OTYPE_PUSHPULL(GPIOH_OSC_IN) | PIN_OTYPE_PUSHPULL(GPIOH_OSC_OUT) | PIN_OTYPE_PUSHPULL(GPIOH_PIN2) | PIN_OTYPE_PUSHPULL(GPIOH_PIN3) | PIN_OTYPE_PUSHPULL(GPIOH_PIN4) | PIN_OTYPE_PUSHPULL(GPIOH_PIN5) | PIN_OTYPE_PUSHPULL(GPIOH_PIN6) | PIN_OTYPE_PUSHPULL(GPIOH_PIN7) | PIN_OTYPE_PUSHPULL(GPIOH_PIN8) | PIN_OTYPE_PUSHPULL(GPIOH_PIN9) | PIN_OTYPE_PUSHPULL(GPIOH_PIN10) | PIN_OTYPE_PUSHPULL(GPIOH_PIN11) | PIN_OTYPE_PUSHPULL(GPIOH_PIN12) | PIN_OTYPE_PUSHPULL(GPIOH_PIN13) | PIN_OTYPE_PUSHPULL(GPIOH_PIN14) | PIN_OTYPE_PUSHPULL(GPIOH_PIN15)) -#define VAL_GPIOH_OSPEEDR (PIN_OSPEED_HIGH(GPIOH_OSC_IN) | PIN_OSPEED_HIGH(GPIOH_OSC_OUT) | PIN_OSPEED_HIGH(GPIOH_PIN2) | PIN_OSPEED_HIGH(GPIOH_PIN3) | PIN_OSPEED_HIGH(GPIOH_PIN4) | PIN_OSPEED_HIGH(GPIOH_PIN5) | PIN_OSPEED_HIGH(GPIOH_PIN6) | PIN_OSPEED_HIGH(GPIOH_PIN7) | PIN_OSPEED_HIGH(GPIOH_PIN8) | PIN_OSPEED_HIGH(GPIOH_PIN9) | PIN_OSPEED_HIGH(GPIOH_PIN10) | PIN_OSPEED_HIGH(GPIOH_PIN11) | PIN_OSPEED_HIGH(GPIOH_PIN12) | PIN_OSPEED_HIGH(GPIOH_PIN13) | PIN_OSPEED_HIGH(GPIOH_PIN14) | PIN_OSPEED_HIGH(GPIOH_PIN15)) -#define VAL_GPIOH_PUPDR (PIN_PUPDR_FLOATING(GPIOH_OSC_IN) | PIN_PUPDR_FLOATING(GPIOH_OSC_OUT) | PIN_PUPDR_PULLUP(GPIOH_PIN2) | PIN_PUPDR_PULLUP(GPIOH_PIN3) | PIN_PUPDR_PULLUP(GPIOH_PIN4) | PIN_PUPDR_PULLUP(GPIOH_PIN5) | PIN_PUPDR_PULLUP(GPIOH_PIN6) | PIN_PUPDR_PULLUP(GPIOH_PIN7) | PIN_PUPDR_PULLUP(GPIOH_PIN8) | PIN_PUPDR_PULLUP(GPIOH_PIN9) | PIN_PUPDR_PULLUP(GPIOH_PIN10) | PIN_PUPDR_PULLUP(GPIOH_PIN11) | PIN_PUPDR_PULLUP(GPIOH_PIN12) | PIN_PUPDR_PULLUP(GPIOH_PIN13) | PIN_PUPDR_PULLUP(GPIOH_PIN14) | PIN_PUPDR_PULLUP(GPIOH_PIN15)) -#define VAL_GPIOH_ODR (PIN_ODR_HIGH(GPIOH_OSC_IN) | PIN_ODR_HIGH(GPIOH_OSC_OUT) | PIN_ODR_HIGH(GPIOH_PIN2) | PIN_ODR_HIGH(GPIOH_PIN3) | PIN_ODR_HIGH(GPIOH_PIN4) | PIN_ODR_HIGH(GPIOH_PIN5) | PIN_ODR_HIGH(GPIOH_PIN6) | PIN_ODR_HIGH(GPIOH_PIN7) | PIN_ODR_HIGH(GPIOH_PIN8) | PIN_ODR_HIGH(GPIOH_PIN9) | PIN_ODR_HIGH(GPIOH_PIN10) | PIN_ODR_HIGH(GPIOH_PIN11) | PIN_ODR_HIGH(GPIOH_PIN12) | PIN_ODR_HIGH(GPIOH_PIN13) | PIN_ODR_HIGH(GPIOH_PIN14) | PIN_ODR_HIGH(GPIOH_PIN15)) -#define VAL_GPIOH_AFRL (PIN_AFIO_AF(GPIOH_OSC_IN, 0U) | PIN_AFIO_AF(GPIOH_OSC_OUT, 0U) | PIN_AFIO_AF(GPIOH_PIN2, 0U) | PIN_AFIO_AF(GPIOH_PIN3, 0U) | PIN_AFIO_AF(GPIOH_PIN4, 0U) | PIN_AFIO_AF(GPIOH_PIN5, 0U) | PIN_AFIO_AF(GPIOH_PIN6, 0U) | PIN_AFIO_AF(GPIOH_PIN7, 0U)) -#define VAL_GPIOH_AFRH (PIN_AFIO_AF(GPIOH_PIN8, 0U) | PIN_AFIO_AF(GPIOH_PIN9, 0U) | PIN_AFIO_AF(GPIOH_PIN10, 0U) | PIN_AFIO_AF(GPIOH_PIN11, 0U) | PIN_AFIO_AF(GPIOH_PIN12, 0U) | PIN_AFIO_AF(GPIOH_PIN13, 0U) | PIN_AFIO_AF(GPIOH_PIN14, 0U) | PIN_AFIO_AF(GPIOH_PIN15, 0U)) - -/* - * GPIOI setup: - * - * PI0 - PIN0 (input pullup). - * PI1 - PIN1 (input pullup). - * PI2 - PIN2 (input pullup). - * PI3 - PIN3 (input pullup). - * PI4 - PIN4 (input pullup). - * PI5 - PIN5 (input pullup). - * PI6 - PIN6 (input pullup). - * PI7 - PIN7 (input pullup). - * PI8 - PIN8 (input pullup). - * PI9 - PIN9 (input pullup). - * PI10 - PIN10 (input pullup). - * PI11 - PIN11 (input pullup). - * PI12 - PIN12 (input pullup). - * PI13 - PIN13 (input pullup). - * PI14 - PIN14 (input pullup). - * PI15 - PIN15 (input pullup). - */ -#define VAL_GPIOI_MODER (PIN_MODE_INPUT(GPIOI_PIN0) | PIN_MODE_INPUT(GPIOI_PIN1) | PIN_MODE_INPUT(GPIOI_PIN2) | PIN_MODE_INPUT(GPIOI_PIN3) | PIN_MODE_INPUT(GPIOI_PIN4) | PIN_MODE_INPUT(GPIOI_PIN5) | PIN_MODE_INPUT(GPIOI_PIN6) | PIN_MODE_INPUT(GPIOI_PIN7) | PIN_MODE_INPUT(GPIOI_PIN8) | PIN_MODE_INPUT(GPIOI_PIN9) | PIN_MODE_INPUT(GPIOI_PIN10) | PIN_MODE_INPUT(GPIOI_PIN11) | PIN_MODE_INPUT(GPIOI_PIN12) | PIN_MODE_INPUT(GPIOI_PIN13) | PIN_MODE_INPUT(GPIOI_PIN14) | PIN_MODE_INPUT(GPIOI_PIN15)) -#define VAL_GPIOI_OTYPER (PIN_OTYPE_PUSHPULL(GPIOI_PIN0) | PIN_OTYPE_PUSHPULL(GPIOI_PIN1) | PIN_OTYPE_PUSHPULL(GPIOI_PIN2) | PIN_OTYPE_PUSHPULL(GPIOI_PIN3) | PIN_OTYPE_PUSHPULL(GPIOI_PIN4) | PIN_OTYPE_PUSHPULL(GPIOI_PIN5) | PIN_OTYPE_PUSHPULL(GPIOI_PIN6) | PIN_OTYPE_PUSHPULL(GPIOI_PIN7) | PIN_OTYPE_PUSHPULL(GPIOI_PIN8) | PIN_OTYPE_PUSHPULL(GPIOI_PIN9) | PIN_OTYPE_PUSHPULL(GPIOI_PIN10) | PIN_OTYPE_PUSHPULL(GPIOI_PIN11) | PIN_OTYPE_PUSHPULL(GPIOI_PIN12) | PIN_OTYPE_PUSHPULL(GPIOI_PIN13) | PIN_OTYPE_PUSHPULL(GPIOI_PIN14) | PIN_OTYPE_PUSHPULL(GPIOI_PIN15)) -#define VAL_GPIOI_OSPEEDR (PIN_OSPEED_HIGH(GPIOI_PIN0) | PIN_OSPEED_HIGH(GPIOI_PIN1) | PIN_OSPEED_HIGH(GPIOI_PIN2) | PIN_OSPEED_HIGH(GPIOI_PIN3) | PIN_OSPEED_HIGH(GPIOI_PIN4) | PIN_OSPEED_HIGH(GPIOI_PIN5) | PIN_OSPEED_HIGH(GPIOI_PIN6) | PIN_OSPEED_HIGH(GPIOI_PIN7) | PIN_OSPEED_HIGH(GPIOI_PIN8) | PIN_OSPEED_HIGH(GPIOI_PIN9) | PIN_OSPEED_HIGH(GPIOI_PIN10) | PIN_OSPEED_HIGH(GPIOI_PIN11) | PIN_OSPEED_HIGH(GPIOI_PIN12) | PIN_OSPEED_HIGH(GPIOI_PIN13) | PIN_OSPEED_HIGH(GPIOI_PIN14) | PIN_OSPEED_HIGH(GPIOI_PIN15)) -#define VAL_GPIOI_PUPDR (PIN_PUPDR_PULLUP(GPIOI_PIN0) | PIN_PUPDR_PULLUP(GPIOI_PIN1) | PIN_PUPDR_PULLUP(GPIOI_PIN2) | PIN_PUPDR_PULLUP(GPIOI_PIN3) | PIN_PUPDR_PULLUP(GPIOI_PIN4) | PIN_PUPDR_PULLUP(GPIOI_PIN5) | PIN_PUPDR_PULLUP(GPIOI_PIN6) | PIN_PUPDR_PULLUP(GPIOI_PIN7) | PIN_PUPDR_PULLUP(GPIOI_PIN8) | PIN_PUPDR_PULLUP(GPIOI_PIN9) | PIN_PUPDR_PULLUP(GPIOI_PIN10) | PIN_PUPDR_PULLUP(GPIOI_PIN11) | PIN_PUPDR_PULLUP(GPIOI_PIN12) | PIN_PUPDR_PULLUP(GPIOI_PIN13) | PIN_PUPDR_PULLUP(GPIOI_PIN14) | PIN_PUPDR_PULLUP(GPIOI_PIN15)) -#define VAL_GPIOI_ODR (PIN_ODR_HIGH(GPIOI_PIN0) | PIN_ODR_HIGH(GPIOI_PIN1) | PIN_ODR_HIGH(GPIOI_PIN2) | PIN_ODR_HIGH(GPIOI_PIN3) | PIN_ODR_HIGH(GPIOI_PIN4) | PIN_ODR_HIGH(GPIOI_PIN5) | PIN_ODR_HIGH(GPIOI_PIN6) | PIN_ODR_HIGH(GPIOI_PIN7) | PIN_ODR_HIGH(GPIOI_PIN8) | PIN_ODR_HIGH(GPIOI_PIN9) | PIN_ODR_HIGH(GPIOI_PIN10) | PIN_ODR_HIGH(GPIOI_PIN11) | PIN_ODR_HIGH(GPIOI_PIN12) | PIN_ODR_HIGH(GPIOI_PIN13) | PIN_ODR_HIGH(GPIOI_PIN14) | PIN_ODR_HIGH(GPIOI_PIN15)) -#define VAL_GPIOI_AFRL (PIN_AFIO_AF(GPIOI_PIN0, 0U) | PIN_AFIO_AF(GPIOI_PIN1, 0U) | PIN_AFIO_AF(GPIOI_PIN2, 0U) | PIN_AFIO_AF(GPIOI_PIN3, 0U) | PIN_AFIO_AF(GPIOI_PIN4, 0U) | PIN_AFIO_AF(GPIOI_PIN5, 0U) | PIN_AFIO_AF(GPIOI_PIN6, 0U) | PIN_AFIO_AF(GPIOI_PIN7, 0U)) -#define VAL_GPIOI_AFRH (PIN_AFIO_AF(GPIOI_PIN8, 0U) | PIN_AFIO_AF(GPIOI_PIN9, 0U) | PIN_AFIO_AF(GPIOI_PIN10, 0U) | PIN_AFIO_AF(GPIOI_PIN11, 0U) | PIN_AFIO_AF(GPIOI_PIN12, 0U) | PIN_AFIO_AF(GPIOI_PIN13, 0U) | PIN_AFIO_AF(GPIOI_PIN14, 0U) | PIN_AFIO_AF(GPIOI_PIN15, 0U)) - -/*===========================================================================*/ -/* External declarations. */ -/*===========================================================================*/ - -#if !defined(_FROM_ASM_) -# ifdef __cplusplus -extern "C" { -# endif -void boardInit(void); -# ifdef __cplusplus -} -# endif -#endif /* _FROM_ASM_ */ - -#endif /* BOARD_H */ diff --git a/drivers/boards/BLACKPILL_STM32_F411/cfg/board.chcfg b/drivers/boards/BLACKPILL_STM32_F411/cfg/board.chcfg deleted file mode 100644 index 3095409cca..0000000000 --- a/drivers/boards/BLACKPILL_STM32_F411/cfg/board.chcfg +++ /dev/null @@ -1,1193 +0,0 @@ -<?xml version="1.0" encoding="UTF-8"?> -<!-- STM32F4xx board Template --> -<board - xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" - xsi:noNamespaceSchemaLocation="http://www.chibios.org/xml/schema/boards/stm32f4xx_board.xsd"> - <configuration_settings> - <templates_path>resources/gencfg/processors/boards/stm32f4xx/templates</templates_path> - <output_path>..</output_path> - <hal_version>5.0.x</hal_version> - </configuration_settings> - <board_name>STMicroelectronics STM32 Nucleo64-F411RE</board_name> - <board_id>ST_NUCLEO64_F411RE</board_id> - <board_functions></board_functions> - <subtype>STM32F411xE</subtype> - <clocks - HSEFrequency="8000000" - HSEBypass="true" - LSEFrequency="0" - LSEBypass="false" - VDD="300" /> - <ports> - <GPIOA> - <pin0 - ID="ARD_A0 ADC1_IN0" - Type="PushPull" - Level="High" - Speed="Maximum" - Resistor="PullUp" - Mode="Input" - Alternate="0" /> - <pin1 - ID="ARD_A1 ADC1_IN1" - Type="PushPull" - Level="High" - Speed="Maximum" - Resistor="PullUp" - Mode="Input" - Alternate="0" /> - <pin2 - ID="ARD_D1 USART2_TX" - Type="PushPull" - Level="High" - Speed="High" - Resistor="Floating" - Mode="Alternate" - Alternate="7" /> - <pin3 - ID="ARD_D0 USART2_RX" - Type="PushPull" - Level="High" - Speed="High" - Resistor="Floating" - Mode="Alternate" - Alternate="7" /> - <pin4 - ID="ARD_A2 ADC1_IN4" - Type="PushPull" - Level="High" - Speed="Maximum" - Resistor="PullUp" - Mode="Input" - Alternate="0" /> - <pin5 - ID="LED_GREEN ARD_D13" - Type="PushPull" - Level="Low" - Speed="High" - Resistor="Floating" - Mode="Output" - Alternate="0" /> - <pin6 - ID="ARD_D12" - Type="PushPull" - Level="High" - Speed="Maximum" - Resistor="PullUp" - Mode="Input" - Alternate="0" /> - <pin7 - ID="ARD_D11" - Type="PushPull" - Level="High" - Speed="Maximum" - Resistor="PullUp" - Mode="Input" - Alternate="0" /> - <pin8 - ID="ARD_D7" - Type="PushPull" - Level="High" - Speed="Maximum" - Resistor="PullUp" - Mode="Input" - Alternate="0" /> - <pin9 - ID="ARD_D8" - Type="PushPull" - Level="High" - Speed="Maximum" - Resistor="PullUp" - Mode="Input" - Alternate="0" /> - <pin10 - ID="ARD_D2" - Type="PushPull" - Level="High" - Speed="Maximum" - Resistor="PullUp" - Mode="Input" - Alternate="0" /> - <pin11 - ID="OTG_FS_DM" - Type="PushPull" - Level="High" - Speed="Maximum" - Resistor="Floating" - Mode="Alternate" - Alternate="10" /> - <pin12 - ID="OTG_FS_DP" - Type="PushPull" - Level="High" - Speed="Maximum" - Resistor="Floating" - Mode="Alternate" - Alternate="10" /> - <pin13 - ID="SWDIO" - Type="PushPull" - Level="High" - Speed="Maximum" - Resistor="PullUp" - Mode="Alternate" - Alternate="0" /> - <pin14 - ID="SWCLK" - Type="PushPull" - Level="High" - Speed="Maximum" - Resistor="PullDown" - Mode="Alternate" - Alternate="0" /> - <pin15 - ID="" - Type="PushPull" - Level="High" - Speed="Maximum" - Resistor="PullUp" - Mode="Input" - Alternate="0" /> - </GPIOA> - <GPIOB> - <pin0 - ID="ARD_A3 ADC1_IN8" - Type="PushPull" - Level="High" - Speed="Maximum" - Resistor="PullUp" - Mode="Input" - Alternate="0" /> - <pin1 - ID="" - Type="PushPull" - Level="High" - Speed="Maximum" - Resistor="PullUp" - Mode="Input" - Alternate="0" /> - <pin2 - ID="" - Type="PushPull" - Level="High" - Speed="Maximum" - Resistor="PullUp" - Mode="Input" - Alternate="0" /> - <pin3 - ID="SWO ARD_D3" - Type="PushPull" - Level="High" - Speed="Maximum" - Resistor="PullUp" - Mode="Alternate" - Alternate="0" /> - <pin4 - ID="ARD_D5" - Type="PushPull" - Level="High" - Speed="Maximum" - Resistor="PullUp" - Mode="Input" - Alternate="0" /> - <pin5 - ID="ARD_D4" - Type="PushPull" - Level="High" - Speed="Maximum" - Resistor="PullUp" - Mode="Input" - Alternate="0" /> - <pin6 - ID="ARD_D10" - Type="PushPull" - Level="High" - Speed="Maximum" - Resistor="PullUp" - Mode="Input" - Alternate="0" /> - <pin7 - ID="" - Type="PushPull" - Level="High" - Speed="Maximum" - Resistor="PullUp" - Mode="Input" - Alternate="0" /> - <pin8 - ID="ARD_D15" - Type="PushPull" - Level="High" - Speed="Maximum" - Resistor="PullUp" - Mode="Input" - Alternate="0" /> - <pin9 - ID="ARD_D14" - Type="PushPull" - Level="High" - Speed="Maximum" - Resistor="PullUp" - Mode="Input" - Alternate="0" /> - <pin10 - ID="ARD_D6" - Type="PushPull" - Level="High" - Speed="Maximum" - Resistor="PullUp" - Mode="Input" - Alternate="0" /> - <pin11 - ID="" - Type="PushPull" - Level="High" - Speed="Maximum" - Resistor="PullUp" - Mode="Input" - Alternate="0" /> - <pin12 - ID="" - Type="PushPull" - Level="High" - Speed="Maximum" - Resistor="PullUp" - Mode="Input" - Alternate="0" /> - <pin13 - ID="" - Type="PushPull" - Level="High" - Speed="Maximum" - Resistor="PullUp" - Mode="Input" - Alternate="0" /> - <pin14 - ID="" - Type="PushPull" - Level="High" - Speed="Maximum" - Resistor="PullUp" - Mode="Input" - Alternate="0" /> - <pin15 - ID="" - Type="PushPull" - Level="High" - Speed="Maximum" - Resistor="PullUp" - Mode="Input" - Alternate="0" /> - </GPIOB> - <GPIOC> - <pin0 - ID="ARD_A5 ADC1_IN10" - Type="PushPull" - Level="High" - Speed="Maximum" - Resistor="PullUp" - Mode="Input" - Alternate="0" /> - <pin1 - ID="ARD_A4 ADC1_IN11" - Type="PushPull" - Level="High" - Speed="Maximum" - Resistor="PullUp" - Mode="Input" - Alternate="0" /> - <pin2 - ID="" - Type="PushPull" - Level="High" - Speed="Maximum" - Resistor="PullUp" - Mode="Input" - Alternate="0" /> - <pin3 - ID="" - Type="PushPull" - Level="High" - Speed="Maximum" - Resistor="PullUp" - Mode="Input" - Alternate="0" /> - <pin4 - ID="" - Type="PushPull" - Level="High" - Speed="Maximum" - Resistor="PullUp" - Mode="Input" - Alternate="0" /> - <pin5 - ID="" - Type="PushPull" - Level="High" - Speed="Maximum" - Resistor="PullUp" - Mode="Input" - Alternate="0" /> - <pin6 - ID="" - Type="PushPull" - Level="High" - Speed="Maximum" - Resistor="PullUp" - Mode="Input" - Alternate="0" /> - <pin7 - ID="ARD_D9" - Type="PushPull" - Level="High" - Speed="Maximum" - Resistor="PullUp" - Mode="Input" - Alternate="0" /> - <pin8 - ID="" - Type="PushPull" - Level="High" - Speed="Maximum" - Resistor="PullUp" - Mode="Input" - Alternate="0" /> - <pin9 - ID="" - Type="PushPull" - Level="High" - Speed="Maximum" - Resistor="PullUp" - Mode="Input" - Alternate="0" /> - <pin10 - ID="" - Type="PushPull" - Level="High" - Speed="Maximum" - Resistor="PullUp" - Mode="Input" - Alternate="0" /> - <pin11 - ID="" - Type="PushPull" - Level="High" - Speed="Maximum" - Resistor="PullUp" - Mode="Input" - Alternate="0" /> - <pin12 - ID="" - Type="PushPull" - Level="High" - Speed="Maximum" - Resistor="PullUp" - Mode="Input" - Alternate="0" /> - <pin13 - ID="BUTTON" - Type="PushPull" - Level="High" - Speed="Maximum" - Resistor="Floating" - Mode="Input" - Alternate="0" /> - <pin14 - ID="OSC32_IN" - Type="PushPull" - Level="High" - Speed="Maximum" - Resistor="Floating" - Mode="Input" - Alternate="0" /> - <pin15 - ID="OSC32_OUT" - Type="PushPull" - Level="High" - Speed="Maximum" - Resistor="Floating" - Mode="Input" - Alternate="0" /> - </GPIOC> - <GPIOD> - <pin0 - ID="" - Type="PushPull" - Level="High" - Speed="Maximum" - Resistor="PullUp" - Mode="Input" - Alternate="0" /> - <pin1 - ID="" - Type="PushPull" - Level="High" - Speed="Maximum" - Resistor="PullUp" - Mode="Input" - Alternate="0" /> - <pin2 - ID="" - Type="PushPull" - Level="High" - Speed="Maximum" - Resistor="PullUp" - Mode="Input" - Alternate="0" /> - <pin3 - ID="" - Type="PushPull" - Level="High" - Speed="Maximum" - Resistor="PullUp" - Mode="Input" - Alternate="0" /> - <pin4 - ID="" - Type="PushPull" - Level="High" - Speed="Maximum" - Resistor="PullUp" - Mode="Input" - Alternate="0" /> - <pin5 - ID="" - Type="PushPull" - Level="High" - Speed="Maximum" - Resistor="PullUp" - Mode="Input" - Alternate="0" /> - <pin6 - ID="" - Type="PushPull" - Level="High" - Speed="Maximum" - Resistor="PullUp" - Mode="Input" - Alternate="0" /> - <pin7 - ID="" - Type="PushPull" - Level="High" - Speed="Maximum" - Resistor="PullUp" - Mode="Input" - Alternate="0" /> - <pin8 - ID="" - Type="PushPull" - Level="High" - Speed="Maximum" - Resistor="PullUp" - Mode="Input" - Alternate="0" /> - <pin9 - ID="" - Type="PushPull" - Level="High" - Speed="Maximum" - Resistor="PullUp" - Mode="Input" - Alternate="0" /> - <pin10 - ID="" - Type="PushPull" - Level="High" - Speed="Maximum" - Resistor="PullUp" - Mode="Input" - Alternate="0" /> - <pin11 - ID="" - Type="PushPull" - Level="High" - Speed="Maximum" - Resistor="PullUp" - Mode="Input" - Alternate="0" /> - <pin12 - ID="" - Type="PushPull" - Level="High" - Speed="Maximum" - Resistor="PullUp" - Mode="Input" - Alternate="0" /> - <pin13 - ID="" - Type="PushPull" - Level="High" - Speed="Maximum" - Resistor="PullUp" - Mode="Input" - Alternate="0" /> - <pin14 - ID="" - Type="PushPull" - Level="High" - Speed="Maximum" - Resistor="PullUp" - Mode="Input" - Alternate="0" /> - <pin15 - ID="" - Type="PushPull" - Level="High" - Speed="Maximum" - Resistor="PullUp" - Mode="Input" - Alternate="0" /> - </GPIOD> - <GPIOE> - <pin0 - ID="" - Type="PushPull" - Level="High" - Speed="Maximum" - Resistor="PullUp" - Mode="Input" - Alternate="0" /> - <pin1 - ID="" - Type="PushPull" - Level="High" - Speed="Maximum" - Resistor="PullUp" - Mode="Input" - Alternate="0" /> - <pin2 - ID="" - Type="PushPull" - Level="High" - Speed="Maximum" - Resistor="PullUp" - Mode="Input" - Alternate="0" /> - <pin3 - ID="" - Type="PushPull" - Level="High" - Speed="Maximum" - Resistor="PullUp" - Mode="Input" - Alternate="0" /> - <pin4 - ID="" - Type="PushPull" - Level="High" - Speed="Maximum" - Resistor="PullUp" - Mode="Input" - Alternate="0" /> - <pin5 - ID="" - Type="PushPull" - Level="High" - Speed="Maximum" - Resistor="PullUp" - Mode="Input" - Alternate="0" /> - <pin6 - ID="" - Type="PushPull" - Level="High" - Speed="Maximum" - Resistor="PullUp" - Mode="Input" - Alternate="0" /> - <pin7 - ID="" - Type="PushPull" - Level="High" - Speed="Maximum" - Resistor="PullUp" - Mode="Input" - Alternate="0" /> - <pin8 - ID="" - Type="PushPull" - Level="High" - Speed="Maximum" - Resistor="PullUp" - Mode="Input" - Alternate="0" /> - <pin9 - ID="" - Type="PushPull" - Level="High" - Speed="Maximum" - Resistor="PullUp" - Mode="Input" - Alternate="0" /> - <pin10 - ID="" - Type="PushPull" - Level="High" - Speed="Maximum" - Resistor="PullUp" - Mode="Input" - Alternate="0" /> - <pin11 - ID="" - Type="PushPull" - Level="High" - Speed="Maximum" - Resistor="PullUp" - Mode="Input" - Alternate="0" /> - <pin12 - ID="" - Type="PushPull" - Level="High" - Speed="Maximum" - Resistor="PullUp" - Mode="Input" - Alternate="0" /> - <pin13 - ID="" - Type="PushPull" - Level="High" - Speed="Maximum" - Resistor="PullUp" - Mode="Input" - Alternate="0" /> - <pin14 - ID="" - Type="PushPull" - Level="High" - Speed="Maximum" - Resistor="PullUp" - Mode="Input" - Alternate="0" /> - <pin15 - ID="" - Type="PushPull" - Level="High" - Speed="Maximum" - Resistor="PullUp" - Mode="Input" - Alternate="0" /> - </GPIOE> - <GPIOF> - <pin0 - ID="" - Type="PushPull" - Level="High" - Speed="Maximum" - Resistor="PullUp" - Mode="Input" - Alternate="0" /> - <pin1 - ID="" - Type="PushPull" - Level="High" - Speed="Maximum" - Resistor="PullUp" - Mode="Input" - Alternate="0" /> - <pin2 - ID="" - Type="PushPull" - Level="High" - Speed="Maximum" - Resistor="PullUp" - Mode="Input" - Alternate="0" /> - <pin3 - ID="" - Type="PushPull" - Level="High" - Speed="Maximum" - Resistor="PullUp" - Mode="Input" - Alternate="0" /> - <pin4 - ID="" - Type="PushPull" - Level="High" - Speed="Maximum" - Resistor="PullUp" - Mode="Input" - Alternate="0" /> - <pin5 - ID="" - Type="PushPull" - Level="High" - Speed="Maximum" - Resistor="PullUp" - Mode="Input" - Alternate="0" /> - <pin6 - ID="" - Type="PushPull" - Level="High" - Speed="Maximum" - Resistor="PullUp" - Mode="Input" - Alternate="0" /> - <pin7 - ID="" - Type="PushPull" - Level="High" - Speed="Maximum" - Resistor="PullUp" - Mode="Input" - Alternate="0" /> - <pin8 - ID="" - Type="PushPull" - Level="High" - Speed="Maximum" - Resistor="PullUp" - Mode="Input" - Alternate="0" /> - <pin9 - ID="" - Type="PushPull" - Level="High" - Speed="Maximum" - Resistor="PullUp" - Mode="Input" - Alternate="0" /> - <pin10 - ID="" - Type="PushPull" - Level="High" - Speed="Maximum" - Resistor="PullUp" - Mode="Input" - Alternate="0" /> - <pin11 - ID="" - Type="PushPull" - Level="High" - Speed="Maximum" - Resistor="PullUp" - Mode="Input" - Alternate="0" /> - <pin12 - ID="" - Type="PushPull" - Level="High" - Speed="Maximum" - Resistor="PullUp" - Mode="Input" - Alternate="0" /> - <pin13 - ID="" - Type="PushPull" - Level="High" - Speed="Maximum" - Resistor="PullUp" - Mode="Input" - Alternate="0" /> - <pin14 - ID="" - Type="PushPull" - Level="High" - Speed="Maximum" - Resistor="PullUp" - Mode="Input" - Alternate="0" /> - <pin15 - ID="" - Type="PushPull" - Level="High" - Speed="Maximum" - Resistor="PullUp" - Mode="Input" - Alternate="0" /> - </GPIOF> - <GPIOG> - <pin0 - ID="" - Type="PushPull" - Level="High" - Speed="Maximum" - Resistor="PullUp" - Mode="Input" - Alternate="0" /> - <pin1 - ID="" - Type="PushPull" - Level="High" - Speed="Maximum" - Resistor="PullUp" - Mode="Input" - Alternate="0" /> - <pin2 - ID="" - Type="PushPull" - Level="High" - Speed="Maximum" - Resistor="PullUp" - Mode="Input" - Alternate="0" /> - <pin3 - ID="" - Type="PushPull" - Level="High" - Speed="Maximum" - Resistor="PullUp" - Mode="Input" - Alternate="0" /> - <pin4 - ID="" - Type="PushPull" - Level="High" - Speed="Maximum" - Resistor="PullUp" - Mode="Input" - Alternate="0" /> - <pin5 - ID="" - Type="PushPull" - Level="High" - Speed="Maximum" - Resistor="PullUp" - Mode="Input" - Alternate="0" /> - <pin6 - ID="" - Type="PushPull" - Level="High" - Speed="Maximum" - Resistor="PullUp" - Mode="Input" - Alternate="0" /> - <pin7 - ID="" - Type="PushPull" - Level="High" - Speed="Maximum" - Resistor="PullUp" - Mode="Input" - Alternate="0" /> - <pin8 - ID="" - Type="PushPull" - Level="High" - Speed="Maximum" - Resistor="PullUp" - Mode="Input" - Alternate="0" /> - <pin9 - ID="" - Type="PushPull" - Level="High" - Speed="Maximum" - Resistor="PullUp" - Mode="Input" - Alternate="0" /> - <pin10 - ID="" - Type="PushPull" - Level="High" - Speed="Maximum" - Resistor="PullUp" - Mode="Input" - Alternate="0" /> - <pin11 - ID="" - Type="PushPull" - Level="High" - Speed="Maximum" - Resistor="PullUp" - Mode="Input" - Alternate="0" /> - <pin12 - ID="" - Type="PushPull" - Level="High" - Speed="Maximum" - Resistor="PullUp" - Mode="Input" - Alternate="0" /> - <pin13 - ID="" - Type="PushPull" - Level="High" - Speed="Maximum" - Resistor="PullUp" - Mode="Input" - Alternate="0" /> - <pin14 - ID="" - Type="PushPull" - Level="High" - Speed="Maximum" - Resistor="PullUp" - Mode="Input" - Alternate="0" /> - <pin15 - ID="" - Type="PushPull" - Level="High" - Speed="Maximum" - Resistor="PullUp" - Mode="Input" - Alternate="0" /> - </GPIOG> - <GPIOH> - <pin0 - ID="OSC_IN" - Type="PushPull" - Level="High" - Speed="Maximum" - Resistor="Floating" - Mode="Input" - Alternate="0" /> - <pin1 - ID="OSC_OUT" - Type="PushPull" - Level="High" - Speed="Maximum" - Resistor="Floating" - Mode="Input" - Alternate="0" /> - <pin2 - ID="" - Type="PushPull" - Level="High" - Speed="Maximum" - Resistor="PullUp" - Mode="Input" - Alternate="0" /> - <pin3 - ID="" - Type="PushPull" - Level="High" - Speed="Maximum" - Resistor="PullUp" - Mode="Input" - Alternate="0" /> - <pin4 - ID="" - Type="PushPull" - Level="High" - Speed="Maximum" - Resistor="PullUp" - Mode="Input" - Alternate="0" /> - <pin5 - ID="" - Type="PushPull" - Level="High" - Speed="Maximum" - Resistor="PullUp" - Mode="Input" - Alternate="0" /> - <pin6 - ID="" - Type="PushPull" - Level="High" - Speed="Maximum" - Resistor="PullUp" - Mode="Input" - Alternate="0" /> - <pin7 - ID="" - Type="PushPull" - Level="High" - Speed="Maximum" - Resistor="PullUp" - Mode="Input" - Alternate="0" /> - <pin8 - ID="" - Type="PushPull" - Level="High" - Speed="Maximum" - Resistor="PullUp" - Mode="Input" - Alternate="0" /> - <pin9 - ID="" - Type="PushPull" - Level="High" - Speed="Maximum" - Resistor="PullUp" - Mode="Input" - Alternate="0" /> - <pin10 - ID="" - Type="PushPull" - Level="High" - Speed="Maximum" - Resistor="PullUp" - Mode="Input" - Alternate="0" /> - <pin11 - ID="" - Type="PushPull" - Level="High" - Speed="Maximum" - Resistor="PullUp" - Mode="Input" - Alternate="0" /> - <pin12 - ID="" - Type="PushPull" - Level="High" - Speed="Maximum" - Resistor="PullUp" - Mode="Input" - Alternate="0" /> - <pin13 - ID="" - Type="PushPull" - Level="High" - Speed="Maximum" - Resistor="PullUp" - Mode="Input" - Alternate="0" /> - <pin14 - ID="" - Type="PushPull" - Level="High" - Speed="Maximum" - Resistor="PullUp" - Mode="Input" - Alternate="0" /> - <pin15 - ID="" - Type="PushPull" - Level="High" - Speed="Maximum" - Resistor="PullUp" - Mode="Input" - Alternate="0" /> - </GPIOH> - <GPIOI> - <pin0 - ID="" - Type="PushPull" - Level="High" - Speed="Maximum" - Resistor="PullUp" - Mode="Input" - Alternate="0" /> - <pin1 - ID="" - Type="PushPull" - Level="High" - Speed="Maximum" - Resistor="PullUp" - Mode="Input" - Alternate="0" /> - <pin2 - ID="" - Type="PushPull" - Level="High" - Speed="Maximum" - Resistor="PullUp" - Mode="Input" - Alternate="0" /> - <pin3 - ID="" - Type="PushPull" - Level="High" - Speed="Maximum" - Resistor="PullUp" - Mode="Input" - Alternate="0" /> - <pin4 - ID="" - Type="PushPull" - Level="High" - Speed="Maximum" - Resistor="PullUp" - Mode="Input" - Alternate="0" /> - <pin5 - ID="" - Type="PushPull" - Level="High" - Speed="Maximum" - Resistor="PullUp" - Mode="Input" - Alternate="0" /> - <pin6 - ID="" - Type="PushPull" - Level="High" - Speed="Maximum" - Resistor="PullUp" - Mode="Input" - Alternate="0" /> - <pin7 - ID="" - Type="PushPull" - Level="High" - Speed="Maximum" - Resistor="PullUp" - Mode="Input" - Alternate="0" /> - <pin8 - ID="" - Type="PushPull" - Level="High" - Speed="Maximum" - Resistor="PullUp" - Mode="Input" - Alternate="0" /> - <pin9 - ID="" - Type="PushPull" - Level="High" - Speed="Maximum" - Resistor="PullUp" - Mode="Input" - Alternate="0" /> - <pin10 - ID="" - Type="PushPull" - Level="High" - Speed="Maximum" - Resistor="PullUp" - Mode="Input" - Alternate="0" /> - <pin11 - ID="" - Type="PushPull" - Level="High" - Speed="Maximum" - Resistor="PullUp" - Mode="Input" - Alternate="0" /> - <pin12 - ID="" - Type="PushPull" - Level="High" - Speed="Maximum" - Resistor="PullUp" - Mode="Input" - Alternate="0" /> - <pin13 - ID="" - Type="PushPull" - Level="High" - Speed="Maximum" - Resistor="PullUp" - Mode="Input" - Alternate="0" /> - <pin14 - ID="" - Type="PushPull" - Level="High" - Speed="Maximum" - Resistor="PullUp" - Mode="Input" - Alternate="0" /> - <pin15 - ID="" - Type="PushPull" - Level="High" - Speed="Maximum" - Resistor="PullUp" - Mode="Input" - Alternate="0" /> - </GPIOI> - </ports> -</board> diff --git a/drivers/boards/BLACKPILL_STM32_F411/cfg/board.fmpp b/drivers/boards/BLACKPILL_STM32_F411/cfg/board.fmpp deleted file mode 100644 index 41754c1414..0000000000 --- a/drivers/boards/BLACKPILL_STM32_F411/cfg/board.fmpp +++ /dev/null @@ -1,15 +0,0 @@ -sourceRoot: ../../../../../tools/ftl/processors/boards/stm32f4xx/templates -outputRoot: .. -dataRoot: . - -freemarkerLinks: { - lib: ../../../../../tools/ftl/libs -} - -data : { - doc1:xml ( - board.chcfg - { - } - ) -} diff --git a/drivers/boards/GENERIC_STM32_F072XB/cfg/board.chcfg b/drivers/boards/GENERIC_STM32_F072XB/cfg/board.chcfg deleted file mode 100644 index e6ceecb62e..0000000000 --- a/drivers/boards/GENERIC_STM32_F072XB/cfg/board.chcfg +++ /dev/null @@ -1,703 +0,0 @@ -<?xml version="1.0" encoding="UTF-8"?> -<!-- STM32F0xx board Template --> -<board - xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" - xsi:noNamespaceSchemaLocation="http://www.chibios.org/xml/schema/boards/stm32f0xx_board.xsd"> - <configuration_settings> - <templates_path>resources/gencfg/processors/boards/stm32f0xx/templates</templates_path> - <output_path>..</output_path> - <hal_version>5.0.x</hal_version> - </configuration_settings> - <board_name>ST STM32F072B-Discovery</board_name> - <board_id>ST_STM32F072B_DISCOVERY</board_id> - <board_functions></board_functions> - <subtype>STM32F072xB</subtype> - <clocks HSEFrequency="0" HSEBypass="true" LSEFrequency="0" - LSEBypass="false" LSEDrive="3 High Drive (default)" /> - <ports> - <GPIOA> - <pin0 - ID="BUTTON" - Type="PushPull" - Speed="Minimum" - Resistor="Floating" - Level="High" - Mode="Input" - Alternate="0" /> - <pin1 - ID="" - Type="PushPull" - Speed="Minimum" - Resistor="PullUp" - Level="High" - Mode="Input" - Alternate="0" /> - <pin2 - ID="" - Type="PushPull" - Speed="Minimum" - Resistor="PullUp" - Level="High" - Mode="Input" - Alternate="0" /> - <pin3 - ID="" - Type="PushPull" - Speed="Minimum" - Resistor="PullUp" - Level="High" - Mode="Input" - Alternate="0" /> - <pin4 - ID="" - Type="PushPull" - Speed="Minimum" - Resistor="PullUp" - Level="High" - Mode="Input" - Alternate="0" /> - <pin5 - ID="" - Type="PushPull" - Speed="Minimum" - Resistor="PullUp" - Level="High" - Mode="Input" - Alternate="0" /> - <pin6 - ID="" - Type="PushPull" - Speed="Minimum" - Resistor="PullUp" - Level="High" - Mode="Input" - Alternate="0" /> - <pin7 - ID="" - Type="PushPull" - Speed="Minimum" - Resistor="PullUp" - Level="High" - Mode="Input" - Alternate="0" /> - <pin8 - ID="" - Type="PushPull" - Speed="Minimum" - Resistor="PullUp" - Level="High" - Mode="Input" - Alternate="0" /> - <pin9 - ID="" - Type="PushPull" - Speed="Minimum" - Resistor="PullUp" - Level="High" - Mode="Input" - Alternate="0" /> - <pin10 - ID="" - Type="PushPull" - Speed="Minimum" - Resistor="PullUp" - Level="High" - Mode="Input" - Alternate="0" /> - <pin11 - ID="USB_DM" - Type="PushPull" - Speed="Minimum" - Resistor="Floating" - Level="High" - Mode="Input" - Alternate="0" /> - <pin12 - ID="USB_DP" - Type="PushPull" - Speed="Minimum" - Resistor="Floating" - Level="High" - Mode="Input" - Alternate="0" /> - <pin13 - ID="SWDIO" - Type="PushPull" - Speed="Maximum" - Resistor="PullUp" - Level="High" - Mode="Alternate" - Alternate="0" /> - <pin14 - ID="SWCLK" - Type="PushPull" - Speed="Maximum" - Resistor="PullDown" - Level="High" - Mode="Alternate" - Alternate="0" /> - <pin15 - ID="" - Type="PushPull" - Speed="Maximum" - Resistor="PullUp" - Level="High" - Mode="Input" - Alternate="0" /> - </GPIOA> - <GPIOB> - <pin0 - ID="" - Type="PushPull" - Speed="Minimum" - Resistor="PullUp" - Level="High" - Mode="Input" - Alternate="0" /> - <pin1 - ID="" - Type="PushPull" - Speed="Minimum" - Resistor="PullUp" - Level="High" - Mode="Input" - Alternate="0" /> - <pin2 - ID="" - Type="PushPull" - Speed="Maximum" - Resistor="PullUp" - Level="High" - Mode="Input" - Alternate="0" /> - <pin3 - ID="" - Type="PushPull" - Speed="Maximum" - Resistor="PullUp" - Level="High" - Mode="Input" - Alternate="0" /> - <pin4 - ID="" - Type="PushPull" - Speed="Maximum" - Resistor="PullUp" - Level="High" - Mode="Input" - Alternate="0" /> - <pin5 - ID="" - Type="PushPull" - Speed="Minimum" - Resistor="PullUp" - Level="High" - Mode="Input" - Alternate="0" /> - <pin6 - ID="" - Type="PushPull" - Speed="Minimum" - Resistor="PullUp" - Level="High" - Mode="Input" - Alternate="0" /> - <pin7 - ID="" - Type="PushPull" - Speed="Minimum" - Resistor="PullUp" - Level="High" - Mode="Input" - Alternate="0" /> - <pin8 - ID="" - Type="PushPull" - Speed="Minimum" - Resistor="PullUp" - Level="High" - Mode="Input" - Alternate="0" /> - <pin9 - ID="" - Type="PushPull" - Speed="Minimum" - Resistor="PullUp" - Level="High" - Mode="Input" - Alternate="0" /> - <pin10 - ID="" - Type="PushPull" - Speed="Minimum" - Resistor="PullUp" - Level="High" - Mode="Input" - Alternate="0" /> - <pin11 - ID="" - Type="PushPull" - Speed="Minimum" - Resistor="PullUp" - Level="High" - Mode="Input" - Alternate="0" /> - <pin12 - ID="" - Type="PushPull" - Speed="Minimum" - Resistor="PullUp" - Level="High" - Mode="Input" - Alternate="0" /> - <pin13 - ID="SPI2_SCK" - Type="PushPull" - Speed="Minimum" - Resistor="Floating" - Level="High" - Mode="Alternate" - Alternate="0" /> - <pin14 - ID="SPI2_MISO" - Type="PushPull" - Speed="Minimum" - Resistor="Floating" - Level="High" - Mode="Alternate" - Alternate="0" /> - <pin15 - ID="SPI2_MOSI" - Type="PushPull" - Speed="Minimum" - Resistor="Floating" - Level="High" - Mode="Alternate" - Alternate="0" /> - </GPIOB> - <GPIOC> - <pin0 - ID="MEMS_CS" - Type="PushPull" - Speed="Maximum" - Resistor="Floating" - Level="High" - Mode="Output" - Alternate="0" /> - <pin1 - ID="" - Type="PushPull" - Speed="Minimum" - Resistor="PullUp" - Level="High" - Mode="Input" - Alternate="0" /> - <pin2 - ID="" - Type="PushPull" - Speed="Minimum" - Resistor="PullUp" - Level="High" - Mode="Input" - Alternate="0" /> - <pin3 - ID="" - Type="PushPull" - Speed="Minimum" - Resistor="PullUp" - Level="High" - Mode="Input" - Alternate="0" /> - <pin4 - ID="" - Type="PushPull" - Speed="Minimum" - Resistor="PullUp" - Level="High" - Mode="Input" - Alternate="0" /> - <pin5 - ID="" - Type="PushPull" - Speed="Minimum" - Resistor="PullUp" - Level="High" - Mode="Input" - Alternate="0" /> - <pin6 - ID="LED_RED" - Type="PushPull" - Speed="Maximum" - Resistor="Floating" - Level="Low" - Mode="Output" - Alternate="0" /> - <pin7 - ID="LED_BLUE" - Type="PushPull" - Speed="Maximum" - Resistor="Floating" - Level="Low" - Mode="Output" - Alternate="0" /> - <pin8 - ID="LED_ORANGE" - Type="PushPull" - Speed="Maximum" - Resistor="Floating" - Level="Low" - Mode="Output" - Alternate="0" ></pin8> - <pin9 - ID="LED_GREEN" - Type="PushPull" - Speed="Maximum" - Resistor="Floating" - Level="Low" - Mode="Output" - Alternate="0" /> - <pin10 - ID="" - Type="PushPull" - Speed="Minimum" - Resistor="PullUp" - Level="High" - Mode="Input" - Alternate="0" /> - <pin11 - ID="" - Type="PushPull" - Speed="Minimum" - Resistor="PullUp" - Level="High" - Mode="Input" - Alternate="0" /> - <pin12 - ID="" - Type="PushPull" - Speed="Minimum" - Resistor="PullUp" - Level="High" - Mode="Input" - Alternate="0" /> - <pin13 - ID="" - Type="PushPull" - Speed="Minimum" - Resistor="PullUp" - Level="High" - Mode="Input" - Alternate="0" /> - <pin14 - ID="OSC32_IN" - Type="PushPull" - Speed="Maximum" - Resistor="Floating" - Level="High" - Mode="Input" - Alternate="0" /> - <pin15 - ID="OSC32_OUT" - Type="PushPull" - Speed="Maximum" - Resistor="Floating" - Level="High" - Mode="Input" - Alternate="0" /> - </GPIOC> - <GPIOD> - <pin0 - ID="" - Type="PushPull" - Speed="Minimum" - Resistor="PullUp" - Level="High" - Mode="Input" - Alternate="0" /> - <pin1 - ID="" - Type="PushPull" - Speed="Minimum" - Resistor="PullUp" - Level="High" - Mode="Input" - Alternate="0" /> - <pin2 - ID="" - Type="PushPull" - Speed="Minimum" - Resistor="PullUp" - Level="High" - Mode="Input" - Alternate="0" /> - <pin3 - ID="" - Type="PushPull" - Speed="Minimum" - Resistor="PullUp" - Level="High" - Mode="Input" - Alternate="0" /> - <pin4 - ID="" - Type="PushPull" - Speed="Minimum" - Resistor="PullUp" - Level="High" - Mode="Input" - Alternate="0" /> - <pin5 - ID="" - Type="PushPull" - Speed="Minimum" - Resistor="PullUp" - Level="High" - Mode="Input" - Alternate="0" /> - <pin6 - ID="" - Type="PushPull" - Speed="Minimum" - Resistor="PullUp" - Level="High" - Mode="Input" - Alternate="0" /> - <pin7 - ID="" - Type="PushPull" - Speed="Minimum" - Resistor="PullUp" - Level="High" - Mode="Input" - Alternate="0" /> - <pin8 - ID="" - Type="PushPull" - Speed="Minimum" - Resistor="PullUp" - Level="High" - Mode="Input" - Alternate="0" /> - <pin9 - ID="" - Type="PushPull" - Speed="Minimum" - Resistor="PullUp" - Level="High" - Mode="Input" - Alternate="0" /> - <pin10 - ID="" - Type="PushPull" - Speed="Minimum" - Resistor="PullUp" - Level="High" - Mode="Input" - Alternate="0" /> - <pin11 - ID="" - Type="PushPull" - Speed="Minimum" - Resistor="PullUp" - Level="High" - Mode="Input" - Alternate="0" /> - <pin12 - ID="" - Type="PushPull" - Speed="Minimum" - Resistor="PullUp" - Level="High" - Mode="Input" - Alternate="0" /> - <pin13 - ID="" - Type="PushPull" - Speed="Minimum" - Resistor="PullUp" - Level="High" - Mode="Input" - Alternate="0" /> - <pin14 - ID="" - Type="PushPull" - Speed="Minimum" - Resistor="PullUp" - Level="High" - Mode="Input" - Alternate="0" /> - <pin15 - ID="" - Type="PushPull" - Speed="Minimum" - Resistor="PullUp" - Level="High" - Mode="Input" - Alternate="0" /> - </GPIOD> - <GPIOE> - <pin0 ID="" Type="PushPull" Speed="Minimum" Resistor="PullUp" - Level="High" Mode="Input" Alternate="0" /> - <pin1 ID="" Type="PushPull" Speed="Minimum" Resistor="PullUp" - Level="High" Mode="Input" Alternate="0" /> - <pin2 ID="" Type="PushPull" Speed="Minimum" Resistor="PullUp" - Level="High" Mode="Input" Alternate="0" /> - <pin3 ID="" Type="PushPull" Speed="Minimum" Resistor="PullUp" - Level="High" Mode="Input" Alternate="0" /> - <pin4 ID="" Type="PushPull" Speed="Minimum" Resistor="PullUp" - Level="High" Mode="Input" Alternate="0" /> - <pin5 ID="" Type="PushPull" Speed="Minimum" Resistor="PullUp" - Level="High" Mode="Input" Alternate="0" /> - <pin6 ID="" Type="PushPull" Speed="Minimum" Resistor="PullUp" - Level="High" Mode="Input" Alternate="0" /> - <pin7 ID="" Type="PushPull" Speed="Minimum" Resistor="PullUp" - Level="High" Mode="Input" Alternate="0" /> - <pin8 ID="" Type="PushPull" Speed="Minimum" Resistor="PullUp" - Level="High" Mode="Input" Alternate="0" /> - <pin9 ID="" Type="PushPull" Speed="Minimum" Resistor="PullUp" - Level="High" Mode="Input" Alternate="0" /> - <pin10 ID="" Type="PushPull" Speed="Minimum" Resistor="PullUp" - Level="High" Mode="Input" Alternate="0" /> - <pin11 ID="" Type="PushPull" Speed="Minimum" Resistor="PullUp" - Level="High" Mode="Input" Alternate="0" /> - <pin12 ID="" Type="PushPull" Speed="Minimum" Resistor="PullUp" - Level="High" Mode="Input" Alternate="0" /> - <pin13 ID="" Type="PushPull" Speed="Minimum" Resistor="PullUp" - Level="High" Mode="Input" Alternate="0" /> - <pin14 ID="" Type="PushPull" Speed="Minimum" Resistor="PullUp" - Level="High" Mode="Input" Alternate="0" /> - <pin15 ID="" Type="PushPull" Speed="Minimum" Resistor="PullUp" - Level="High" Mode="Input" Alternate="0" /> - </GPIOE> - <GPIOF> - <pin0 - ID="OSC_IN" - Type="PushPull" - Speed="Minimum" - Resistor="Floating" - Level="High" - Mode="Input" - Alternate="0" /> - <pin1 - ID="OSC_OUT" - Type="PushPull" - Speed="Minimum" - Resistor="Floating" - Level="High" - Mode="Input" - Alternate="0" /> - <pin2 - ID="" - Type="PushPull" - Speed="Minimum" - Resistor="PullUp" - Level="High" - Mode="Input" - Alternate="0" /> - <pin3 - ID="" - Type="PushPull" - Speed="Minimum" - Resistor="PullUp" - Level="High" - Mode="Input" - Alternate="0" /> - <pin4 - ID="" - Type="PushPull" - Speed="Minimum" - Resistor="PullUp" - Level="High" - Mode="Input" - Alternate="0" /> - <pin5 - ID="" - Type="PushPull" - Speed="Minimum" - Resistor="PullUp" - Level="High" - Mode="Input" - Alternate="0" /> - <pin6 - ID="" - Type="PushPull" - Speed="Minimum" - Resistor="PullUp" - Level="High" - Mode="Input" - Alternate="0" /> - <pin7 - ID="" - Type="PushPull" - Speed="Minimum" - Resistor="PullUp" - Level="High" - Mode="Input" - Alternate="0" /> - <pin8 - ID="" - Type="PushPull" - Speed="Minimum" - Resistor="PullUp" - Level="High" - Mode="Input" - Alternate="0" /> - <pin9 - ID="" - Type="PushPull" - Speed="Minimum" - Resistor="PullUp" - Level="High" - Mode="Input" - Alternate="0" /> - <pin10 - ID="" - Type="PushPull" - Speed="Minimum" - Resistor="PullUp" - Level="High" - Mode="Input" - Alternate="0" /> - <pin11 - ID="" - Type="PushPull" - Speed="Minimum" - Resistor="PullUp" - Level="High" - Mode="Input" - Alternate="0" /> - <pin12 - ID="" - Type="PushPull" - Speed="Minimum" - Resistor="PullUp" - Level="High" - Mode="Input" - Alternate="0" /> - <pin13 - ID="" - Type="PushPull" - Speed="Minimum" - Resistor="PullUp" - Level="High" - Mode="Input" - Alternate="0" /> - <pin14 - ID="" - Type="PushPull" - Speed="Minimum" - Resistor="PullUp" - Level="High" - Mode="Input" - Alternate="0" /> - <pin15 - ID="" - Type="PushPull" - Speed="Minimum" - Resistor="PullUp" - Level="High" - Mode="Input" - Alternate="0" /> - </GPIOF> - </ports> -</board> diff --git a/drivers/boards/GENERIC_STM32_F072XB/cfg/board.fmpp b/drivers/boards/GENERIC_STM32_F072XB/cfg/board.fmpp deleted file mode 100644 index 55cd396e41..0000000000 --- a/drivers/boards/GENERIC_STM32_F072XB/cfg/board.fmpp +++ /dev/null @@ -1,15 +0,0 @@ -sourceRoot: ../../../../../tools/ftl/processors/boards/stm32f0xx/templates -outputRoot: .. -dataRoot: . - -freemarkerLinks: { - lib: ../../../../../tools/ftl/libs -} - -data : { - doc1:xml ( - board.chcfg - { - } - ) -} diff --git a/drivers/boards/GENERIC_STM32_F303XC/board.mk b/drivers/boards/GENERIC_STM32_F303XC/board.mk deleted file mode 100644 index 43377629a3..0000000000 --- a/drivers/boards/GENERIC_STM32_F303XC/board.mk +++ /dev/null @@ -1,5 +0,0 @@ -# List of all the board related files. -BOARDSRC = $(BOARD_PATH)/boards/GENERIC_STM32_F303XC/board.c - -# Required include directories -BOARDINC = $(BOARD_PATH)/boards/GENERIC_STM32_F303XC diff --git a/drivers/boards/IC_TEENSY_3_1/board.mk b/drivers/boards/IC_TEENSY_3_1/board.mk deleted file mode 100644 index 62f5b751c7..0000000000 --- a/drivers/boards/IC_TEENSY_3_1/board.mk +++ /dev/null @@ -1,5 +0,0 @@ -# List of all the board related files. -BOARDSRC = $(BOARD_PATH)/boards/IC_TEENSY_3_1/board.c - -# Required include directories -BOARDINC = $(BOARD_PATH)/boards/IC_TEENSY_3_1 diff --git a/drivers/boards/STM32_F103_STM32DUINO/board.mk b/drivers/boards/STM32_F103_STM32DUINO/board.mk deleted file mode 100644 index 81141bdfd9..0000000000 --- a/drivers/boards/STM32_F103_STM32DUINO/board.mk +++ /dev/null @@ -1,5 +0,0 @@ -# List of all the board related files. -BOARDSRC = $(BOARD_PATH)/boards/STM32_F103_STM32DUINO/board.c - -# Required include directories -BOARDINC = $(BOARD_PATH)/boards/STM32_F103_STM32DUINO diff --git a/keyboards/handwired/onekey/blackpill_f401/halconf.h b/keyboards/handwired/onekey/blackpill_f401/halconf.h index a8db392aaa..d73c214ec6 100644 --- a/keyboards/handwired/onekey/blackpill_f401/halconf.h +++ b/keyboards/handwired/onekey/blackpill_f401/halconf.h @@ -1,525 +1,20 @@ -/* - ChibiOS - Copyright (C) 2006..2018 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file templates/halconf.h - * @brief HAL configuration header. - * @details HAL configuration file, this file allows to enable or disable the - * various device drivers from your application. You may also use - * this file in order to override the device drivers default settings. +/* Copyright 2020 Nick Brassel (tzarc) * - * @addtogroup HAL_CONF - * @{ - */ - -#ifndef HALCONF_H -#define HALCONF_H - -#define _CHIBIOS_HAL_CONF_ -#define _CHIBIOS_HAL_CONF_VER_7_0_ - -#include "mcuconf.h" - -/** - * @brief Enables the PAL subsystem. - */ -#if !defined(HAL_USE_PAL) || defined(__DOXYGEN__) -#define HAL_USE_PAL TRUE -#endif - -/** - * @brief Enables the ADC subsystem. - */ -#if !defined(HAL_USE_ADC) || defined(__DOXYGEN__) -#define HAL_USE_ADC FALSE -#endif - -/** - * @brief Enables the CAN subsystem. - */ -#if !defined(HAL_USE_CAN) || defined(__DOXYGEN__) -#define HAL_USE_CAN FALSE -#endif - -/** - * @brief Enables the cryptographic subsystem. - */ -#if !defined(HAL_USE_CRY) || defined(__DOXYGEN__) -#define HAL_USE_CRY FALSE -#endif - -/** - * @brief Enables the DAC subsystem. - */ -#if !defined(HAL_USE_DAC) || defined(__DOXYGEN__) -#define HAL_USE_DAC FALSE -#endif - -/** - * @brief Enables the GPT subsystem. - */ -#if !defined(HAL_USE_GPT) || defined(__DOXYGEN__) -#define HAL_USE_GPT FALSE -#endif - -/** - * @brief Enables the I2C subsystem. - */ -#if !defined(HAL_USE_I2C) || defined(__DOXYGEN__) -#define HAL_USE_I2C FALSE -#endif - -/** - * @brief Enables the I2S subsystem. - */ -#if !defined(HAL_USE_I2S) || defined(__DOXYGEN__) -#define HAL_USE_I2S FALSE -#endif - -/** - * @brief Enables the ICU subsystem. - */ -#if !defined(HAL_USE_ICU) || defined(__DOXYGEN__) -#define HAL_USE_ICU FALSE -#endif - -/** - * @brief Enables the MAC subsystem. - */ -#if !defined(HAL_USE_MAC) || defined(__DOXYGEN__) -#define HAL_USE_MAC FALSE -#endif - -/** - * @brief Enables the MMC_SPI subsystem. - */ -#if !defined(HAL_USE_MMC_SPI) || defined(__DOXYGEN__) -#define HAL_USE_MMC_SPI FALSE -#endif - -/** - * @brief Enables the PWM subsystem. - */ -#if !defined(HAL_USE_PWM) || defined(__DOXYGEN__) -#define HAL_USE_PWM FALSE -#endif - -/** - * @brief Enables the RTC subsystem. - */ -#if !defined(HAL_USE_RTC) || defined(__DOXYGEN__) -#define HAL_USE_RTC FALSE -#endif - -/** - * @brief Enables the SDC subsystem. - */ -#if !defined(HAL_USE_SDC) || defined(__DOXYGEN__) -#define HAL_USE_SDC FALSE -#endif - -/** - * @brief Enables the SERIAL subsystem. - */ -#if !defined(HAL_USE_SERIAL) || defined(__DOXYGEN__) -#define HAL_USE_SERIAL FALSE -#endif - -/** - * @brief Enables the SERIAL over USB subsystem. - */ -#if !defined(HAL_USE_SERIAL_USB) || defined(__DOXYGEN__) -#define HAL_USE_SERIAL_USB FALSE -#endif - -/** - * @brief Enables the SIO subsystem. - */ -#if !defined(HAL_USE_SIO) || defined(__DOXYGEN__) -#define HAL_USE_SIO FALSE -#endif - -/** - * @brief Enables the SPI subsystem. - */ -#if !defined(HAL_USE_SPI) || defined(__DOXYGEN__) -#define HAL_USE_SPI FALSE -#endif - -/** - * @brief Enables the TRNG subsystem. - */ -#if !defined(HAL_USE_TRNG) || defined(__DOXYGEN__) -#define HAL_USE_TRNG FALSE -#endif - -/** - * @brief Enables the UART subsystem. - */ -#if !defined(HAL_USE_UART) || defined(__DOXYGEN__) -#define HAL_USE_UART FALSE -#endif - -/** - * @brief Enables the USB subsystem. - */ -#if !defined(HAL_USE_USB) || defined(__DOXYGEN__) -#define HAL_USE_USB TRUE -#endif - -/** - * @brief Enables the WDG subsystem. - */ -#if !defined(HAL_USE_WDG) || defined(__DOXYGEN__) -#define HAL_USE_WDG FALSE -#endif - -/** - * @brief Enables the WSPI subsystem. - */ -#if !defined(HAL_USE_WSPI) || defined(__DOXYGEN__) -#define HAL_USE_WSPI FALSE -#endif - -/*===========================================================================*/ -/* PAL driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(PAL_USE_CALLBACKS) || defined(__DOXYGEN__) -#define PAL_USE_CALLBACKS FALSE -#endif - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(PAL_USE_WAIT) || defined(__DOXYGEN__) -#define PAL_USE_WAIT FALSE -#endif - -/*===========================================================================*/ -/* ADC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(ADC_USE_WAIT) || defined(__DOXYGEN__) -#define ADC_USE_WAIT TRUE -#endif - -/** - * @brief Enables the @p adcAcquireBus() and @p adcReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(ADC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define ADC_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* CAN driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Sleep mode related APIs inclusion switch. - */ -#if !defined(CAN_USE_SLEEP_MODE) || defined(__DOXYGEN__) -#define CAN_USE_SLEEP_MODE TRUE -#endif - -/** - * @brief Enforces the driver to use direct callbacks rather than OSAL events. - */ -#if !defined(CAN_ENFORCE_USE_CALLBACKS) || defined(__DOXYGEN__) -#define CAN_ENFORCE_USE_CALLBACKS FALSE -#endif - -/*===========================================================================*/ -/* CRY driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables the SW fall-back of the cryptographic driver. - * @details When enabled, this option, activates a fall-back software - * implementation for algorithms not supported by the underlying - * hardware. - * @note Fall-back implementations may not be present for all algorithms. - */ -#if !defined(HAL_CRY_USE_FALLBACK) || defined(__DOXYGEN__) -#define HAL_CRY_USE_FALLBACK FALSE -#endif - -/** - * @brief Makes the driver forcibly use the fall-back implementations. - */ -#if !defined(HAL_CRY_ENFORCE_FALLBACK) || defined(__DOXYGEN__) -#define HAL_CRY_ENFORCE_FALLBACK FALSE -#endif - -/*===========================================================================*/ -/* DAC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(DAC_USE_WAIT) || defined(__DOXYGEN__) -#define DAC_USE_WAIT TRUE -#endif - -/** - * @brief Enables the @p dacAcquireBus() and @p dacReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(DAC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define DAC_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* I2C driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables the mutual exclusion APIs on the I2C bus. - */ -#if !defined(I2C_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define I2C_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* MAC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables the zero-copy API. - */ -#if !defined(MAC_USE_ZERO_COPY) || defined(__DOXYGEN__) -#define MAC_USE_ZERO_COPY FALSE -#endif - -/** - * @brief Enables an event sources for incoming packets. - */ -#if !defined(MAC_USE_EVENTS) || defined(__DOXYGEN__) -#define MAC_USE_EVENTS TRUE -#endif - -/*===========================================================================*/ -/* MMC_SPI driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Delays insertions. - * @details If enabled this options inserts delays into the MMC waiting - * routines releasing some extra CPU time for the threads with - * lower priority, this may slow down the driver a bit however. - * This option is recommended also if the SPI driver does not - * use a DMA channel and heavily loads the CPU. - */ -#if !defined(MMC_NICE_WAITING) || defined(__DOXYGEN__) -#define MMC_NICE_WAITING TRUE -#endif - -/*===========================================================================*/ -/* SDC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Number of initialization attempts before rejecting the card. - * @note Attempts are performed at 10mS intervals. - */ -#if !defined(SDC_INIT_RETRY) || defined(__DOXYGEN__) -#define SDC_INIT_RETRY 100 -#endif - -/** - * @brief Include support for MMC cards. - * @note MMC support is not yet implemented so this option must be kept - * at @p FALSE. - */ -#if !defined(SDC_MMC_SUPPORT) || defined(__DOXYGEN__) -#define SDC_MMC_SUPPORT FALSE -#endif - -/** - * @brief Delays insertions. - * @details If enabled this options inserts delays into the MMC waiting - * routines releasing some extra CPU time for the threads with - * lower priority, this may slow down the driver a bit however. - */ -#if !defined(SDC_NICE_WAITING) || defined(__DOXYGEN__) -#define SDC_NICE_WAITING TRUE -#endif - -/** - * @brief OCR initialization constant for V20 cards. - */ -#if !defined(SDC_INIT_OCR_V20) || defined(__DOXYGEN__) -#define SDC_INIT_OCR_V20 0x50FF8000U -#endif - -/** - * @brief OCR initialization constant for non-V20 cards. - */ -#if !defined(SDC_INIT_OCR) || defined(__DOXYGEN__) -#define SDC_INIT_OCR 0x80100000U -#endif - -/*===========================================================================*/ -/* SERIAL driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Default bit rate. - * @details Configuration parameter, this is the baud rate selected for the - * default configuration. - */ -#if !defined(SERIAL_DEFAULT_BITRATE) || defined(__DOXYGEN__) -#define SERIAL_DEFAULT_BITRATE 38400 -#endif - -/** - * @brief Serial buffers size. - * @details Configuration parameter, you can change the depth of the queue - * buffers depending on the requirements of your application. - * @note The default is 16 bytes for both the transmission and receive - * buffers. - */ -#if !defined(SERIAL_BUFFERS_SIZE) || defined(__DOXYGEN__) -#define SERIAL_BUFFERS_SIZE 16 -#endif - -/*===========================================================================*/ -/* SERIAL_USB driver related setting. */ -/*===========================================================================*/ - -/** - * @brief Serial over USB buffers size. - * @details Configuration parameter, the buffer size must be a multiple of - * the USB data endpoint maximum packet size. - * @note The default is 256 bytes for both the transmission and receive - * buffers. - */ -#if !defined(SERIAL_USB_BUFFERS_SIZE) || defined(__DOXYGEN__) -#define SERIAL_USB_BUFFERS_SIZE 256 -#endif - -/** - * @brief Serial over USB number of buffers. - * @note The default is 2 buffers. - */ -#if !defined(SERIAL_USB_BUFFERS_NUMBER) || defined(__DOXYGEN__) -#define SERIAL_USB_BUFFERS_NUMBER 2 -#endif - -/*===========================================================================*/ -/* SPI driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_USE_WAIT) || defined(__DOXYGEN__) -#define SPI_USE_WAIT TRUE -#endif - -/** - * @brief Enables circular transfers APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_USE_CIRCULAR) || defined(__DOXYGEN__) -#define SPI_USE_CIRCULAR FALSE -#endif - - -/** - * @brief Enables the @p spiAcquireBus() and @p spiReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define SPI_USE_MUTUAL_EXCLUSION TRUE -#endif - -/** - * @brief Handling method for SPI CS line. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_SELECT_MODE) || defined(__DOXYGEN__) -#define SPI_SELECT_MODE SPI_SELECT_MODE_PAD -#endif - -/*===========================================================================*/ -/* UART driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(UART_USE_WAIT) || defined(__DOXYGEN__) -#define UART_USE_WAIT FALSE -#endif - -/** - * @brief Enables the @p uartAcquireBus() and @p uartReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(UART_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define UART_USE_MUTUAL_EXCLUSION FALSE -#endif - -/*===========================================================================*/ -/* USB driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(USB_USE_WAIT) || defined(__DOXYGEN__) -#define USB_USE_WAIT TRUE -#endif - -/*===========================================================================*/ -/* WSPI driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(WSPI_USE_WAIT) || defined(__DOXYGEN__) -#define WSPI_USE_WAIT TRUE -#endif - -/** - * @brief Enables the @p wspiAcquireBus() and @p wspiReleaseBus() APIs. - * @note Disabling this option saves both code and data space. + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <https://www.gnu.org/licenses/>. */ -#if !defined(WSPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define WSPI_USE_MUTUAL_EXCLUSION TRUE -#endif +#pragma once -#endif /* HALCONF_H */ +#define HAL_USE_I2C TRUE -/** @} */ +#include_next "halconf.h" diff --git a/keyboards/handwired/onekey/blackpill_f401/mcuconf.h b/keyboards/handwired/onekey/blackpill_f401/mcuconf.h index ba6e934fe7..33e07847b4 100644 --- a/keyboards/handwired/onekey/blackpill_f401/mcuconf.h +++ b/keyboards/handwired/onekey/blackpill_f401/mcuconf.h @@ -1,253 +1,21 @@ -/* - ChibiOS - Copyright (C) 2006..2018 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -#ifndef MCUCONF_H -#define MCUCONF_H - -/* - * STM32F4xx drivers configuration. - * The following settings override the default settings present in - * the various device driver implementation headers. - * Note that the settings for each driver only have effect if the whole - * driver is enabled in halconf.h. +/* Copyright 2020 Nick Brassel (tzarc) * - * IRQ priorities: - * 15...0 Lowest...Highest. + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. * - * DMA priorities: - * 0...3 Lowest...Highest. - */ - -#define STM32F4xx_MCUCONF - -/* - * HAL driver system settings. - */ -#define STM32_NO_INIT FALSE -#define STM32_HSI_ENABLED TRUE -#define STM32_LSI_ENABLED TRUE -#define STM32_HSE_ENABLED TRUE -#define STM32_LSE_ENABLED FALSE -#define STM32_CLOCK48_REQUIRED TRUE -#define STM32_SW STM32_SW_PLL -#define STM32_PLLSRC STM32_PLLSRC_HSE -#define STM32_PLLM_VALUE 25 -#define STM32_PLLN_VALUE 336 -#define STM32_PLLP_VALUE 4 -#define STM32_PLLQ_VALUE 7 -#define STM32_HPRE STM32_HPRE_DIV1 -#define STM32_PPRE1 STM32_PPRE1_DIV4 -#define STM32_PPRE2 STM32_PPRE2_DIV2 -#define STM32_RTCSEL STM32_RTCSEL_LSI -#define STM32_RTCPRE_VALUE 8 -#define STM32_MCO1SEL STM32_MCO1SEL_HSI -#define STM32_MCO1PRE STM32_MCO1PRE_DIV1 -#define STM32_MCO2SEL STM32_MCO2SEL_SYSCLK -#define STM32_MCO2PRE STM32_MCO2PRE_DIV5 -#define STM32_I2SSRC STM32_I2SSRC_CKIN -#define STM32_PLLI2SN_VALUE 192 -#define STM32_PLLI2SR_VALUE 5 -#define STM32_PVD_ENABLE FALSE -#define STM32_PLS STM32_PLS_LEV0 -#define STM32_BKPRAM_ENABLE FALSE - -/* - * IRQ system settings. - */ -#define STM32_IRQ_EXTI0_PRIORITY 6 -#define STM32_IRQ_EXTI1_PRIORITY 6 -#define STM32_IRQ_EXTI2_PRIORITY 6 -#define STM32_IRQ_EXTI3_PRIORITY 6 -#define STM32_IRQ_EXTI4_PRIORITY 6 -#define STM32_IRQ_EXTI5_9_PRIORITY 6 -#define STM32_IRQ_EXTI10_15_PRIORITY 6 -#define STM32_IRQ_EXTI16_PRIORITY 6 -#define STM32_IRQ_EXTI17_PRIORITY 15 -#define STM32_IRQ_EXTI18_PRIORITY 6 -#define STM32_IRQ_EXTI19_PRIORITY 6 -#define STM32_IRQ_EXTI20_PRIORITY 6 -#define STM32_IRQ_EXTI21_PRIORITY 15 -#define STM32_IRQ_EXTI22_PRIORITY 15 - -/* - * ADC driver system settings. - */ -#define STM32_ADC_ADCPRE ADC_CCR_ADCPRE_DIV4 -#define STM32_ADC_USE_ADC1 FALSE -#define STM32_ADC_ADC1_DMA_STREAM STM32_DMA_STREAM_ID(2, 4) -#define STM32_ADC_ADC1_DMA_PRIORITY 2 -#define STM32_ADC_IRQ_PRIORITY 6 -#define STM32_ADC_ADC1_DMA_IRQ_PRIORITY 6 - -/* - * GPT driver system settings. - */ -#define STM32_GPT_USE_TIM1 FALSE -#define STM32_GPT_USE_TIM2 FALSE -#define STM32_GPT_USE_TIM3 FALSE -#define STM32_GPT_USE_TIM4 FALSE -#define STM32_GPT_USE_TIM5 FALSE -#define STM32_GPT_USE_TIM9 FALSE -#define STM32_GPT_USE_TIM11 FALSE -#define STM32_GPT_TIM1_IRQ_PRIORITY 7 -#define STM32_GPT_TIM2_IRQ_PRIORITY 7 -#define STM32_GPT_TIM3_IRQ_PRIORITY 7 -#define STM32_GPT_TIM4_IRQ_PRIORITY 7 -#define STM32_GPT_TIM5_IRQ_PRIORITY 7 -#define STM32_GPT_TIM9_IRQ_PRIORITY 7 -#define STM32_GPT_TIM11_IRQ_PRIORITY 7 - -/* - * I2C driver system settings. - */ -#define STM32_I2C_USE_I2C1 FALSE -#define STM32_I2C_USE_I2C2 FALSE -#define STM32_I2C_USE_I2C3 FALSE -#define STM32_I2C_BUSY_TIMEOUT 50 -#define STM32_I2C_I2C1_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 0) -#define STM32_I2C_I2C1_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 6) -#define STM32_I2C_I2C2_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 2) -#define STM32_I2C_I2C2_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 7) -#define STM32_I2C_I2C3_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 2) -#define STM32_I2C_I2C3_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 4) -#define STM32_I2C_I2C1_IRQ_PRIORITY 5 -#define STM32_I2C_I2C2_IRQ_PRIORITY 5 -#define STM32_I2C_I2C3_IRQ_PRIORITY 5 -#define STM32_I2C_I2C1_DMA_PRIORITY 3 -#define STM32_I2C_I2C2_DMA_PRIORITY 3 -#define STM32_I2C_I2C3_DMA_PRIORITY 3 -#define STM32_I2C_DMA_ERROR_HOOK(i2cp) osalSysHalt("DMA failure") - -/* - * I2S driver system settings. - */ -#define STM32_I2S_USE_SPI2 FALSE -#define STM32_I2S_USE_SPI3 FALSE -#define STM32_I2S_SPI2_IRQ_PRIORITY 10 -#define STM32_I2S_SPI3_IRQ_PRIORITY 10 -#define STM32_I2S_SPI2_DMA_PRIORITY 1 -#define STM32_I2S_SPI3_DMA_PRIORITY 1 -#define STM32_I2S_SPI2_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 3) -#define STM32_I2S_SPI2_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 4) -#define STM32_I2S_SPI3_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 0) -#define STM32_I2S_SPI3_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 7) -#define STM32_I2S_DMA_ERROR_HOOK(i2sp) osalSysHalt("DMA failure") - -/* - * ICU driver system settings. - */ -#define STM32_ICU_USE_TIM1 FALSE -#define STM32_ICU_USE_TIM2 FALSE -#define STM32_ICU_USE_TIM3 FALSE -#define STM32_ICU_USE_TIM4 FALSE -#define STM32_ICU_USE_TIM5 FALSE -#define STM32_ICU_USE_TIM9 FALSE -#define STM32_ICU_TIM1_IRQ_PRIORITY 7 -#define STM32_ICU_TIM2_IRQ_PRIORITY 7 -#define STM32_ICU_TIM3_IRQ_PRIORITY 7 -#define STM32_ICU_TIM4_IRQ_PRIORITY 7 -#define STM32_ICU_TIM5_IRQ_PRIORITY 7 -#define STM32_ICU_TIM9_IRQ_PRIORITY 7 - -/* - * PWM driver system settings. - */ -#define STM32_PWM_USE_ADVANCED FALSE -#define STM32_PWM_USE_TIM1 FALSE -#define STM32_PWM_USE_TIM2 FALSE -#define STM32_PWM_USE_TIM3 FALSE -#define STM32_PWM_USE_TIM4 FALSE -#define STM32_PWM_USE_TIM5 FALSE -#define STM32_PWM_USE_TIM9 FALSE -#define STM32_PWM_TIM1_IRQ_PRIORITY 7 -#define STM32_PWM_TIM2_IRQ_PRIORITY 7 -#define STM32_PWM_TIM3_IRQ_PRIORITY 7 -#define STM32_PWM_TIM4_IRQ_PRIORITY 7 -#define STM32_PWM_TIM5_IRQ_PRIORITY 7 -#define STM32_PWM_TIM9_IRQ_PRIORITY 7 - -/* - * SERIAL driver system settings. - */ -#define STM32_SERIAL_USE_USART1 FALSE -#define STM32_SERIAL_USE_USART2 FALSE -#define STM32_SERIAL_USE_USART6 FALSE -#define STM32_SERIAL_USART1_PRIORITY 12 -#define STM32_SERIAL_USART2_PRIORITY 12 -#define STM32_SERIAL_USART6_PRIORITY 12 - -/* - * SPI driver system settings. - */ -#define STM32_SPI_USE_SPI1 FALSE -#define STM32_SPI_USE_SPI2 FALSE -#define STM32_SPI_USE_SPI3 FALSE -#define STM32_SPI_SPI1_RX_DMA_STREAM STM32_DMA_STREAM_ID(2, 0) -#define STM32_SPI_SPI1_TX_DMA_STREAM STM32_DMA_STREAM_ID(2, 3) -#define STM32_SPI_SPI2_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 3) -#define STM32_SPI_SPI2_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 4) -#define STM32_SPI_SPI3_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 0) -#define STM32_SPI_SPI3_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 7) -#define STM32_SPI_SPI1_DMA_PRIORITY 1 -#define STM32_SPI_SPI2_DMA_PRIORITY 1 -#define STM32_SPI_SPI3_DMA_PRIORITY 1 -#define STM32_SPI_SPI1_IRQ_PRIORITY 10 -#define STM32_SPI_SPI2_IRQ_PRIORITY 10 -#define STM32_SPI_SPI3_IRQ_PRIORITY 10 -#define STM32_SPI_DMA_ERROR_HOOK(spip) osalSysHalt("DMA failure") - -/* - * ST driver system settings. - */ -#define STM32_ST_IRQ_PRIORITY 8 -#define STM32_ST_USE_TIMER 2 - -/* - * UART driver system settings. - */ -#define STM32_UART_USE_USART1 FALSE -#define STM32_UART_USE_USART2 FALSE -#define STM32_UART_USE_USART6 FALSE -#define STM32_UART_USART1_RX_DMA_STREAM STM32_DMA_STREAM_ID(2, 5) -#define STM32_UART_USART1_TX_DMA_STREAM STM32_DMA_STREAM_ID(2, 7) -#define STM32_UART_USART2_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 5) -#define STM32_UART_USART2_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 6) -#define STM32_UART_USART6_RX_DMA_STREAM STM32_DMA_STREAM_ID(2, 2) -#define STM32_UART_USART6_TX_DMA_STREAM STM32_DMA_STREAM_ID(2, 7) -#define STM32_UART_USART1_IRQ_PRIORITY 12 -#define STM32_UART_USART2_IRQ_PRIORITY 12 -#define STM32_UART_USART6_IRQ_PRIORITY 12 -#define STM32_UART_USART1_DMA_PRIORITY 0 -#define STM32_UART_USART2_DMA_PRIORITY 0 -#define STM32_UART_USART6_DMA_PRIORITY 0 -#define STM32_UART_DMA_ERROR_HOOK(uartp) osalSysHalt("DMA failure") - -/* - * USB driver system settings. + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <https://www.gnu.org/licenses/>. */ -#define STM32_USB_USE_OTG1 TRUE -#define STM32_USB_OTG1_IRQ_PRIORITY 14 -#define STM32_USB_OTG1_RX_FIFO_SIZE 512 -#define STM32_USB_OTG_THREAD_PRIO NORMALPRIO+1 -#define STM32_USB_OTG_THREAD_STACK_SIZE 128 -#define STM32_USB_OTGFIFO_FILL_BASEPRI 0 +#pragma once -/* - * WDG driver system settings. - */ -#define STM32_WDG_USE_IWDG FALSE +#include_next "mcuconf.h" -#endif /* MCUCONF_H */ +#undef STM32_I2C_USE_I2C1 +#define STM32_I2C_USE_I2C1 TRUE diff --git a/keyboards/handwired/onekey/blackpill_f411/halconf.h b/keyboards/handwired/onekey/blackpill_f411/halconf.h index a8db392aaa..d73c214ec6 100644 --- a/keyboards/handwired/onekey/blackpill_f411/halconf.h +++ b/keyboards/handwired/onekey/blackpill_f411/halconf.h @@ -1,525 +1,20 @@ -/* - ChibiOS - Copyright (C) 2006..2018 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file templates/halconf.h - * @brief HAL configuration header. - * @details HAL configuration file, this file allows to enable or disable the - * various device drivers from your application. You may also use - * this file in order to override the device drivers default settings. +/* Copyright 2020 Nick Brassel (tzarc) * - * @addtogroup HAL_CONF - * @{ - */ - -#ifndef HALCONF_H -#define HALCONF_H - -#define _CHIBIOS_HAL_CONF_ -#define _CHIBIOS_HAL_CONF_VER_7_0_ - -#include "mcuconf.h" - -/** - * @brief Enables the PAL subsystem. - */ -#if !defined(HAL_USE_PAL) || defined(__DOXYGEN__) -#define HAL_USE_PAL TRUE -#endif - -/** - * @brief Enables the ADC subsystem. - */ -#if !defined(HAL_USE_ADC) || defined(__DOXYGEN__) -#define HAL_USE_ADC FALSE -#endif - -/** - * @brief Enables the CAN subsystem. - */ -#if !defined(HAL_USE_CAN) || defined(__DOXYGEN__) -#define HAL_USE_CAN FALSE -#endif - -/** - * @brief Enables the cryptographic subsystem. - */ -#if !defined(HAL_USE_CRY) || defined(__DOXYGEN__) -#define HAL_USE_CRY FALSE -#endif - -/** - * @brief Enables the DAC subsystem. - */ -#if !defined(HAL_USE_DAC) || defined(__DOXYGEN__) -#define HAL_USE_DAC FALSE -#endif - -/** - * @brief Enables the GPT subsystem. - */ -#if !defined(HAL_USE_GPT) || defined(__DOXYGEN__) -#define HAL_USE_GPT FALSE -#endif - -/** - * @brief Enables the I2C subsystem. - */ -#if !defined(HAL_USE_I2C) || defined(__DOXYGEN__) -#define HAL_USE_I2C FALSE -#endif - -/** - * @brief Enables the I2S subsystem. - */ -#if !defined(HAL_USE_I2S) || defined(__DOXYGEN__) -#define HAL_USE_I2S FALSE -#endif - -/** - * @brief Enables the ICU subsystem. - */ -#if !defined(HAL_USE_ICU) || defined(__DOXYGEN__) -#define HAL_USE_ICU FALSE -#endif - -/** - * @brief Enables the MAC subsystem. - */ -#if !defined(HAL_USE_MAC) || defined(__DOXYGEN__) -#define HAL_USE_MAC FALSE -#endif - -/** - * @brief Enables the MMC_SPI subsystem. - */ -#if !defined(HAL_USE_MMC_SPI) || defined(__DOXYGEN__) -#define HAL_USE_MMC_SPI FALSE -#endif - -/** - * @brief Enables the PWM subsystem. - */ -#if !defined(HAL_USE_PWM) || defined(__DOXYGEN__) -#define HAL_USE_PWM FALSE -#endif - -/** - * @brief Enables the RTC subsystem. - */ -#if !defined(HAL_USE_RTC) || defined(__DOXYGEN__) -#define HAL_USE_RTC FALSE -#endif - -/** - * @brief Enables the SDC subsystem. - */ -#if !defined(HAL_USE_SDC) || defined(__DOXYGEN__) -#define HAL_USE_SDC FALSE -#endif - -/** - * @brief Enables the SERIAL subsystem. - */ -#if !defined(HAL_USE_SERIAL) || defined(__DOXYGEN__) -#define HAL_USE_SERIAL FALSE -#endif - -/** - * @brief Enables the SERIAL over USB subsystem. - */ -#if !defined(HAL_USE_SERIAL_USB) || defined(__DOXYGEN__) -#define HAL_USE_SERIAL_USB FALSE -#endif - -/** - * @brief Enables the SIO subsystem. - */ -#if !defined(HAL_USE_SIO) || defined(__DOXYGEN__) -#define HAL_USE_SIO FALSE -#endif - -/** - * @brief Enables the SPI subsystem. - */ -#if !defined(HAL_USE_SPI) || defined(__DOXYGEN__) -#define HAL_USE_SPI FALSE -#endif - -/** - * @brief Enables the TRNG subsystem. - */ -#if !defined(HAL_USE_TRNG) || defined(__DOXYGEN__) -#define HAL_USE_TRNG FALSE -#endif - -/** - * @brief Enables the UART subsystem. - */ -#if !defined(HAL_USE_UART) || defined(__DOXYGEN__) -#define HAL_USE_UART FALSE -#endif - -/** - * @brief Enables the USB subsystem. - */ -#if !defined(HAL_USE_USB) || defined(__DOXYGEN__) -#define HAL_USE_USB TRUE -#endif - -/** - * @brief Enables the WDG subsystem. - */ -#if !defined(HAL_USE_WDG) || defined(__DOXYGEN__) -#define HAL_USE_WDG FALSE -#endif - -/** - * @brief Enables the WSPI subsystem. - */ -#if !defined(HAL_USE_WSPI) || defined(__DOXYGEN__) -#define HAL_USE_WSPI FALSE -#endif - -/*===========================================================================*/ -/* PAL driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(PAL_USE_CALLBACKS) || defined(__DOXYGEN__) -#define PAL_USE_CALLBACKS FALSE -#endif - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(PAL_USE_WAIT) || defined(__DOXYGEN__) -#define PAL_USE_WAIT FALSE -#endif - -/*===========================================================================*/ -/* ADC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(ADC_USE_WAIT) || defined(__DOXYGEN__) -#define ADC_USE_WAIT TRUE -#endif - -/** - * @brief Enables the @p adcAcquireBus() and @p adcReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(ADC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define ADC_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* CAN driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Sleep mode related APIs inclusion switch. - */ -#if !defined(CAN_USE_SLEEP_MODE) || defined(__DOXYGEN__) -#define CAN_USE_SLEEP_MODE TRUE -#endif - -/** - * @brief Enforces the driver to use direct callbacks rather than OSAL events. - */ -#if !defined(CAN_ENFORCE_USE_CALLBACKS) || defined(__DOXYGEN__) -#define CAN_ENFORCE_USE_CALLBACKS FALSE -#endif - -/*===========================================================================*/ -/* CRY driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables the SW fall-back of the cryptographic driver. - * @details When enabled, this option, activates a fall-back software - * implementation for algorithms not supported by the underlying - * hardware. - * @note Fall-back implementations may not be present for all algorithms. - */ -#if !defined(HAL_CRY_USE_FALLBACK) || defined(__DOXYGEN__) -#define HAL_CRY_USE_FALLBACK FALSE -#endif - -/** - * @brief Makes the driver forcibly use the fall-back implementations. - */ -#if !defined(HAL_CRY_ENFORCE_FALLBACK) || defined(__DOXYGEN__) -#define HAL_CRY_ENFORCE_FALLBACK FALSE -#endif - -/*===========================================================================*/ -/* DAC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(DAC_USE_WAIT) || defined(__DOXYGEN__) -#define DAC_USE_WAIT TRUE -#endif - -/** - * @brief Enables the @p dacAcquireBus() and @p dacReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(DAC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define DAC_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* I2C driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables the mutual exclusion APIs on the I2C bus. - */ -#if !defined(I2C_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define I2C_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* MAC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables the zero-copy API. - */ -#if !defined(MAC_USE_ZERO_COPY) || defined(__DOXYGEN__) -#define MAC_USE_ZERO_COPY FALSE -#endif - -/** - * @brief Enables an event sources for incoming packets. - */ -#if !defined(MAC_USE_EVENTS) || defined(__DOXYGEN__) -#define MAC_USE_EVENTS TRUE -#endif - -/*===========================================================================*/ -/* MMC_SPI driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Delays insertions. - * @details If enabled this options inserts delays into the MMC waiting - * routines releasing some extra CPU time for the threads with - * lower priority, this may slow down the driver a bit however. - * This option is recommended also if the SPI driver does not - * use a DMA channel and heavily loads the CPU. - */ -#if !defined(MMC_NICE_WAITING) || defined(__DOXYGEN__) -#define MMC_NICE_WAITING TRUE -#endif - -/*===========================================================================*/ -/* SDC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Number of initialization attempts before rejecting the card. - * @note Attempts are performed at 10mS intervals. - */ -#if !defined(SDC_INIT_RETRY) || defined(__DOXYGEN__) -#define SDC_INIT_RETRY 100 -#endif - -/** - * @brief Include support for MMC cards. - * @note MMC support is not yet implemented so this option must be kept - * at @p FALSE. - */ -#if !defined(SDC_MMC_SUPPORT) || defined(__DOXYGEN__) -#define SDC_MMC_SUPPORT FALSE -#endif - -/** - * @brief Delays insertions. - * @details If enabled this options inserts delays into the MMC waiting - * routines releasing some extra CPU time for the threads with - * lower priority, this may slow down the driver a bit however. - */ -#if !defined(SDC_NICE_WAITING) || defined(__DOXYGEN__) -#define SDC_NICE_WAITING TRUE -#endif - -/** - * @brief OCR initialization constant for V20 cards. - */ -#if !defined(SDC_INIT_OCR_V20) || defined(__DOXYGEN__) -#define SDC_INIT_OCR_V20 0x50FF8000U -#endif - -/** - * @brief OCR initialization constant for non-V20 cards. - */ -#if !defined(SDC_INIT_OCR) || defined(__DOXYGEN__) -#define SDC_INIT_OCR 0x80100000U -#endif - -/*===========================================================================*/ -/* SERIAL driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Default bit rate. - * @details Configuration parameter, this is the baud rate selected for the - * default configuration. - */ -#if !defined(SERIAL_DEFAULT_BITRATE) || defined(__DOXYGEN__) -#define SERIAL_DEFAULT_BITRATE 38400 -#endif - -/** - * @brief Serial buffers size. - * @details Configuration parameter, you can change the depth of the queue - * buffers depending on the requirements of your application. - * @note The default is 16 bytes for both the transmission and receive - * buffers. - */ -#if !defined(SERIAL_BUFFERS_SIZE) || defined(__DOXYGEN__) -#define SERIAL_BUFFERS_SIZE 16 -#endif - -/*===========================================================================*/ -/* SERIAL_USB driver related setting. */ -/*===========================================================================*/ - -/** - * @brief Serial over USB buffers size. - * @details Configuration parameter, the buffer size must be a multiple of - * the USB data endpoint maximum packet size. - * @note The default is 256 bytes for both the transmission and receive - * buffers. - */ -#if !defined(SERIAL_USB_BUFFERS_SIZE) || defined(__DOXYGEN__) -#define SERIAL_USB_BUFFERS_SIZE 256 -#endif - -/** - * @brief Serial over USB number of buffers. - * @note The default is 2 buffers. - */ -#if !defined(SERIAL_USB_BUFFERS_NUMBER) || defined(__DOXYGEN__) -#define SERIAL_USB_BUFFERS_NUMBER 2 -#endif - -/*===========================================================================*/ -/* SPI driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_USE_WAIT) || defined(__DOXYGEN__) -#define SPI_USE_WAIT TRUE -#endif - -/** - * @brief Enables circular transfers APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_USE_CIRCULAR) || defined(__DOXYGEN__) -#define SPI_USE_CIRCULAR FALSE -#endif - - -/** - * @brief Enables the @p spiAcquireBus() and @p spiReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define SPI_USE_MUTUAL_EXCLUSION TRUE -#endif - -/** - * @brief Handling method for SPI CS line. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_SELECT_MODE) || defined(__DOXYGEN__) -#define SPI_SELECT_MODE SPI_SELECT_MODE_PAD -#endif - -/*===========================================================================*/ -/* UART driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(UART_USE_WAIT) || defined(__DOXYGEN__) -#define UART_USE_WAIT FALSE -#endif - -/** - * @brief Enables the @p uartAcquireBus() and @p uartReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(UART_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define UART_USE_MUTUAL_EXCLUSION FALSE -#endif - -/*===========================================================================*/ -/* USB driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(USB_USE_WAIT) || defined(__DOXYGEN__) -#define USB_USE_WAIT TRUE -#endif - -/*===========================================================================*/ -/* WSPI driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(WSPI_USE_WAIT) || defined(__DOXYGEN__) -#define WSPI_USE_WAIT TRUE -#endif - -/** - * @brief Enables the @p wspiAcquireBus() and @p wspiReleaseBus() APIs. - * @note Disabling this option saves both code and data space. + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <https://www.gnu.org/licenses/>. */ -#if !defined(WSPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define WSPI_USE_MUTUAL_EXCLUSION TRUE -#endif +#pragma once -#endif /* HALCONF_H */ +#define HAL_USE_I2C TRUE -/** @} */ +#include_next "halconf.h" diff --git a/keyboards/handwired/onekey/blackpill_f411/mcuconf.h b/keyboards/handwired/onekey/blackpill_f411/mcuconf.h index 0394ff56bb..33e07847b4 100644 --- a/keyboards/handwired/onekey/blackpill_f411/mcuconf.h +++ b/keyboards/handwired/onekey/blackpill_f411/mcuconf.h @@ -1,253 +1,21 @@ -/* - ChibiOS - Copyright (C) 2006..2018 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -#ifndef MCUCONF_H -#define MCUCONF_H - -/* - * STM32F4xx drivers configuration. - * The following settings override the default settings present in - * the various device driver implementation headers. - * Note that the settings for each driver only have effect if the whole - * driver is enabled in halconf.h. +/* Copyright 2020 Nick Brassel (tzarc) * - * IRQ priorities: - * 15...0 Lowest...Highest. + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. * - * DMA priorities: - * 0...3 Lowest...Highest. - */ - -#define STM32F4xx_MCUCONF - -/* - * HAL driver system settings. - */ -#define STM32_NO_INIT FALSE -#define STM32_HSI_ENABLED TRUE -#define STM32_LSI_ENABLED TRUE -#define STM32_HSE_ENABLED TRUE -#define STM32_LSE_ENABLED FALSE -#define STM32_CLOCK48_REQUIRED TRUE -#define STM32_SW STM32_SW_PLL -#define STM32_PLLSRC STM32_PLLSRC_HSE -#define STM32_PLLM_VALUE 25 -#define STM32_PLLN_VALUE 384 -#define STM32_PLLP_VALUE 4 -#define STM32_PLLQ_VALUE 8 -#define STM32_HPRE STM32_HPRE_DIV1 -#define STM32_PPRE1 STM32_PPRE1_DIV4 -#define STM32_PPRE2 STM32_PPRE2_DIV2 -#define STM32_RTCSEL STM32_RTCSEL_LSI -#define STM32_RTCPRE_VALUE 8 -#define STM32_MCO1SEL STM32_MCO1SEL_HSI -#define STM32_MCO1PRE STM32_MCO1PRE_DIV1 -#define STM32_MCO2SEL STM32_MCO2SEL_SYSCLK -#define STM32_MCO2PRE STM32_MCO2PRE_DIV5 -#define STM32_I2SSRC STM32_I2SSRC_CKIN -#define STM32_PLLI2SN_VALUE 192 -#define STM32_PLLI2SR_VALUE 5 -#define STM32_PVD_ENABLE FALSE -#define STM32_PLS STM32_PLS_LEV0 -#define STM32_BKPRAM_ENABLE FALSE - -/* - * IRQ system settings. - */ -#define STM32_IRQ_EXTI0_PRIORITY 6 -#define STM32_IRQ_EXTI1_PRIORITY 6 -#define STM32_IRQ_EXTI2_PRIORITY 6 -#define STM32_IRQ_EXTI3_PRIORITY 6 -#define STM32_IRQ_EXTI4_PRIORITY 6 -#define STM32_IRQ_EXTI5_9_PRIORITY 6 -#define STM32_IRQ_EXTI10_15_PRIORITY 6 -#define STM32_IRQ_EXTI16_PRIORITY 6 -#define STM32_IRQ_EXTI17_PRIORITY 15 -#define STM32_IRQ_EXTI18_PRIORITY 6 -#define STM32_IRQ_EXTI19_PRIORITY 6 -#define STM32_IRQ_EXTI20_PRIORITY 6 -#define STM32_IRQ_EXTI21_PRIORITY 15 -#define STM32_IRQ_EXTI22_PRIORITY 15 - -/* - * ADC driver system settings. - */ -#define STM32_ADC_ADCPRE ADC_CCR_ADCPRE_DIV4 -#define STM32_ADC_USE_ADC1 FALSE -#define STM32_ADC_ADC1_DMA_STREAM STM32_DMA_STREAM_ID(2, 4) -#define STM32_ADC_ADC1_DMA_PRIORITY 2 -#define STM32_ADC_IRQ_PRIORITY 6 -#define STM32_ADC_ADC1_DMA_IRQ_PRIORITY 6 - -/* - * GPT driver system settings. - */ -#define STM32_GPT_USE_TIM1 FALSE -#define STM32_GPT_USE_TIM2 FALSE -#define STM32_GPT_USE_TIM3 FALSE -#define STM32_GPT_USE_TIM4 FALSE -#define STM32_GPT_USE_TIM5 FALSE -#define STM32_GPT_USE_TIM9 FALSE -#define STM32_GPT_USE_TIM11 FALSE -#define STM32_GPT_TIM1_IRQ_PRIORITY 7 -#define STM32_GPT_TIM2_IRQ_PRIORITY 7 -#define STM32_GPT_TIM3_IRQ_PRIORITY 7 -#define STM32_GPT_TIM4_IRQ_PRIORITY 7 -#define STM32_GPT_TIM5_IRQ_PRIORITY 7 -#define STM32_GPT_TIM9_IRQ_PRIORITY 7 -#define STM32_GPT_TIM11_IRQ_PRIORITY 7 - -/* - * I2C driver system settings. - */ -#define STM32_I2C_USE_I2C1 FALSE -#define STM32_I2C_USE_I2C2 FALSE -#define STM32_I2C_USE_I2C3 FALSE -#define STM32_I2C_BUSY_TIMEOUT 50 -#define STM32_I2C_I2C1_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 0) -#define STM32_I2C_I2C1_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 6) -#define STM32_I2C_I2C2_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 2) -#define STM32_I2C_I2C2_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 7) -#define STM32_I2C_I2C3_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 2) -#define STM32_I2C_I2C3_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 4) -#define STM32_I2C_I2C1_IRQ_PRIORITY 5 -#define STM32_I2C_I2C2_IRQ_PRIORITY 5 -#define STM32_I2C_I2C3_IRQ_PRIORITY 5 -#define STM32_I2C_I2C1_DMA_PRIORITY 3 -#define STM32_I2C_I2C2_DMA_PRIORITY 3 -#define STM32_I2C_I2C3_DMA_PRIORITY 3 -#define STM32_I2C_DMA_ERROR_HOOK(i2cp) osalSysHalt("DMA failure") - -/* - * I2S driver system settings. - */ -#define STM32_I2S_USE_SPI2 FALSE -#define STM32_I2S_USE_SPI3 FALSE -#define STM32_I2S_SPI2_IRQ_PRIORITY 10 -#define STM32_I2S_SPI3_IRQ_PRIORITY 10 -#define STM32_I2S_SPI2_DMA_PRIORITY 1 -#define STM32_I2S_SPI3_DMA_PRIORITY 1 -#define STM32_I2S_SPI2_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 3) -#define STM32_I2S_SPI2_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 4) -#define STM32_I2S_SPI3_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 0) -#define STM32_I2S_SPI3_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 7) -#define STM32_I2S_DMA_ERROR_HOOK(i2sp) osalSysHalt("DMA failure") - -/* - * ICU driver system settings. - */ -#define STM32_ICU_USE_TIM1 FALSE -#define STM32_ICU_USE_TIM2 FALSE -#define STM32_ICU_USE_TIM3 FALSE -#define STM32_ICU_USE_TIM4 FALSE -#define STM32_ICU_USE_TIM5 FALSE -#define STM32_ICU_USE_TIM9 FALSE -#define STM32_ICU_TIM1_IRQ_PRIORITY 7 -#define STM32_ICU_TIM2_IRQ_PRIORITY 7 -#define STM32_ICU_TIM3_IRQ_PRIORITY 7 -#define STM32_ICU_TIM4_IRQ_PRIORITY 7 -#define STM32_ICU_TIM5_IRQ_PRIORITY 7 -#define STM32_ICU_TIM9_IRQ_PRIORITY 7 - -/* - * PWM driver system settings. - */ -#define STM32_PWM_USE_ADVANCED FALSE -#define STM32_PWM_USE_TIM1 FALSE -#define STM32_PWM_USE_TIM2 FALSE -#define STM32_PWM_USE_TIM3 FALSE -#define STM32_PWM_USE_TIM4 FALSE -#define STM32_PWM_USE_TIM5 FALSE -#define STM32_PWM_USE_TIM9 FALSE -#define STM32_PWM_TIM1_IRQ_PRIORITY 7 -#define STM32_PWM_TIM2_IRQ_PRIORITY 7 -#define STM32_PWM_TIM3_IRQ_PRIORITY 7 -#define STM32_PWM_TIM4_IRQ_PRIORITY 7 -#define STM32_PWM_TIM5_IRQ_PRIORITY 7 -#define STM32_PWM_TIM9_IRQ_PRIORITY 7 - -/* - * SERIAL driver system settings. - */ -#define STM32_SERIAL_USE_USART1 FALSE -#define STM32_SERIAL_USE_USART2 FALSE -#define STM32_SERIAL_USE_USART6 FALSE -#define STM32_SERIAL_USART1_PRIORITY 12 -#define STM32_SERIAL_USART2_PRIORITY 12 -#define STM32_SERIAL_USART6_PRIORITY 12 - -/* - * SPI driver system settings. - */ -#define STM32_SPI_USE_SPI1 FALSE -#define STM32_SPI_USE_SPI2 FALSE -#define STM32_SPI_USE_SPI3 FALSE -#define STM32_SPI_SPI1_RX_DMA_STREAM STM32_DMA_STREAM_ID(2, 0) -#define STM32_SPI_SPI1_TX_DMA_STREAM STM32_DMA_STREAM_ID(2, 3) -#define STM32_SPI_SPI2_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 3) -#define STM32_SPI_SPI2_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 4) -#define STM32_SPI_SPI3_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 0) -#define STM32_SPI_SPI3_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 7) -#define STM32_SPI_SPI1_DMA_PRIORITY 1 -#define STM32_SPI_SPI2_DMA_PRIORITY 1 -#define STM32_SPI_SPI3_DMA_PRIORITY 1 -#define STM32_SPI_SPI1_IRQ_PRIORITY 10 -#define STM32_SPI_SPI2_IRQ_PRIORITY 10 -#define STM32_SPI_SPI3_IRQ_PRIORITY 10 -#define STM32_SPI_DMA_ERROR_HOOK(spip) osalSysHalt("DMA failure") - -/* - * ST driver system settings. - */ -#define STM32_ST_IRQ_PRIORITY 8 -#define STM32_ST_USE_TIMER 2 - -/* - * UART driver system settings. - */ -#define STM32_UART_USE_USART1 FALSE -#define STM32_UART_USE_USART2 FALSE -#define STM32_UART_USE_USART6 FALSE -#define STM32_UART_USART1_RX_DMA_STREAM STM32_DMA_STREAM_ID(2, 5) -#define STM32_UART_USART1_TX_DMA_STREAM STM32_DMA_STREAM_ID(2, 7) -#define STM32_UART_USART2_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 5) -#define STM32_UART_USART2_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 6) -#define STM32_UART_USART6_RX_DMA_STREAM STM32_DMA_STREAM_ID(2, 2) -#define STM32_UART_USART6_TX_DMA_STREAM STM32_DMA_STREAM_ID(2, 7) -#define STM32_UART_USART1_IRQ_PRIORITY 12 -#define STM32_UART_USART2_IRQ_PRIORITY 12 -#define STM32_UART_USART6_IRQ_PRIORITY 12 -#define STM32_UART_USART1_DMA_PRIORITY 0 -#define STM32_UART_USART2_DMA_PRIORITY 0 -#define STM32_UART_USART6_DMA_PRIORITY 0 -#define STM32_UART_DMA_ERROR_HOOK(uartp) osalSysHalt("DMA failure") - -/* - * USB driver system settings. + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <https://www.gnu.org/licenses/>. */ -#define STM32_USB_USE_OTG1 TRUE -#define STM32_USB_OTG1_IRQ_PRIORITY 14 -#define STM32_USB_OTG1_RX_FIFO_SIZE 512 -#define STM32_USB_OTG_THREAD_PRIO NORMALPRIO+1 -#define STM32_USB_OTG_THREAD_STACK_SIZE 128 -#define STM32_USB_OTGFIFO_FILL_BASEPRI 0 +#pragma once -/* - * WDG driver system settings. - */ -#define STM32_WDG_USE_IWDG FALSE +#include_next "mcuconf.h" -#endif /* MCUCONF_H */ +#undef STM32_I2C_USE_I2C1 +#define STM32_I2C_USE_I2C1 TRUE diff --git a/keyboards/peiorisboards/ixora/boards/GENERIC_STM32_F042X6/board.c b/keyboards/peiorisboards/ixora/boards/GENERIC_STM32_F042X6/board.c deleted file mode 100644 index 754dc5c4dd..0000000000 --- a/keyboards/peiorisboards/ixora/boards/GENERIC_STM32_F042X6/board.c +++ /dev/null @@ -1,268 +0,0 @@ -/* - ChibiOS - Copyright (C) 2006..2018 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/* - * This file has been automatically generated using ChibiStudio board - * generator plugin. Do not edit manually. - */ - -#include "hal.h" -#include "stm32_gpio.h" - -/*===========================================================================*/ -/* Driver local definitions. */ -/*===========================================================================*/ - -/*===========================================================================*/ -/* Driver exported variables. */ -/*===========================================================================*/ - -/*===========================================================================*/ -/* Driver local variables and types. */ -/*===========================================================================*/ - -/** - * @brief Type of STM32 GPIO port setup. - */ -typedef struct { - uint32_t moder; - uint32_t otyper; - uint32_t ospeedr; - uint32_t pupdr; - uint32_t odr; - uint32_t afrl; - uint32_t afrh; -} gpio_setup_t; - -/** - * @brief Type of STM32 GPIO initialization data. - */ -typedef struct { -#if STM32_HAS_GPIOA || defined(__DOXYGEN__) - gpio_setup_t PAData; -#endif -#if STM32_HAS_GPIOB || defined(__DOXYGEN__) - gpio_setup_t PBData; -#endif -#if STM32_HAS_GPIOC || defined(__DOXYGEN__) - gpio_setup_t PCData; -#endif -#if STM32_HAS_GPIOD || defined(__DOXYGEN__) - gpio_setup_t PDData; -#endif -#if STM32_HAS_GPIOE || defined(__DOXYGEN__) - gpio_setup_t PEData; -#endif -#if STM32_HAS_GPIOF || defined(__DOXYGEN__) - gpio_setup_t PFData; -#endif -#if STM32_HAS_GPIOG || defined(__DOXYGEN__) - gpio_setup_t PGData; -#endif -#if STM32_HAS_GPIOH || defined(__DOXYGEN__) - gpio_setup_t PHData; -#endif -#if STM32_HAS_GPIOI || defined(__DOXYGEN__) - gpio_setup_t PIData; -#endif -#if STM32_HAS_GPIOJ || defined(__DOXYGEN__) - gpio_setup_t PJData; -#endif -#if STM32_HAS_GPIOK || defined(__DOXYGEN__) - gpio_setup_t PKData; -#endif -} gpio_config_t; - -/** - * @brief STM32 GPIO static initialization data. - */ -static const gpio_config_t gpio_default_config = { -#if STM32_HAS_GPIOA - {VAL_GPIOA_MODER, VAL_GPIOA_OTYPER, VAL_GPIOA_OSPEEDR, VAL_GPIOA_PUPDR, - VAL_GPIOA_ODR, VAL_GPIOA_AFRL, VAL_GPIOA_AFRH}, -#endif -#if STM32_HAS_GPIOB - {VAL_GPIOB_MODER, VAL_GPIOB_OTYPER, VAL_GPIOB_OSPEEDR, VAL_GPIOB_PUPDR, - VAL_GPIOB_ODR, VAL_GPIOB_AFRL, VAL_GPIOB_AFRH}, -#endif -#if STM32_HAS_GPIOC - {VAL_GPIOC_MODER, VAL_GPIOC_OTYPER, VAL_GPIOC_OSPEEDR, VAL_GPIOC_PUPDR, - VAL_GPIOC_ODR, VAL_GPIOC_AFRL, VAL_GPIOC_AFRH}, -#endif -#if STM32_HAS_GPIOD - {VAL_GPIOD_MODER, VAL_GPIOD_OTYPER, VAL_GPIOD_OSPEEDR, VAL_GPIOD_PUPDR, - VAL_GPIOD_ODR, VAL_GPIOD_AFRL, VAL_GPIOD_AFRH}, -#endif -#if STM32_HAS_GPIOE - {VAL_GPIOE_MODER, VAL_GPIOE_OTYPER, VAL_GPIOE_OSPEEDR, VAL_GPIOE_PUPDR, - VAL_GPIOE_ODR, VAL_GPIOE_AFRL, VAL_GPIOE_AFRH}, -#endif -#if STM32_HAS_GPIOF - {VAL_GPIOF_MODER, VAL_GPIOF_OTYPER, VAL_GPIOF_OSPEEDR, VAL_GPIOF_PUPDR, - VAL_GPIOF_ODR, VAL_GPIOF_AFRL, VAL_GPIOF_AFRH}, -#endif -#if STM32_HAS_GPIOG - {VAL_GPIOG_MODER, VAL_GPIOG_OTYPER, VAL_GPIOG_OSPEEDR, VAL_GPIOG_PUPDR, - VAL_GPIOG_ODR, VAL_GPIOG_AFRL, VAL_GPIOG_AFRH}, -#endif -#if STM32_HAS_GPIOH - {VAL_GPIOH_MODER, VAL_GPIOH_OTYPER, VAL_GPIOH_OSPEEDR, VAL_GPIOH_PUPDR, - VAL_GPIOH_ODR, VAL_GPIOH_AFRL, VAL_GPIOH_AFRH}, -#endif -#if STM32_HAS_GPIOI - {VAL_GPIOI_MODER, VAL_GPIOI_OTYPER, VAL_GPIOI_OSPEEDR, VAL_GPIOI_PUPDR, - VAL_GPIOI_ODR, VAL_GPIOI_AFRL, VAL_GPIOI_AFRH}, -#endif -#if STM32_HAS_GPIOJ - {VAL_GPIOJ_MODER, VAL_GPIOJ_OTYPER, VAL_GPIOJ_OSPEEDR, VAL_GPIOJ_PUPDR, - VAL_GPIOJ_ODR, VAL_GPIOJ_AFRL, VAL_GPIOJ_AFRH}, -#endif -#if STM32_HAS_GPIOK - {VAL_GPIOK_MODER, VAL_GPIOK_OTYPER, VAL_GPIOK_OSPEEDR, VAL_GPIOK_PUPDR, - VAL_GPIOK_ODR, VAL_GPIOK_AFRL, VAL_GPIOK_AFRH} -#endif -}; - -/*===========================================================================*/ -/* Driver local functions. */ -/*===========================================================================*/ - -static void gpio_init(stm32_gpio_t *gpiop, const gpio_setup_t *config) { - - gpiop->OTYPER = config->otyper; - gpiop->OSPEEDR = config->ospeedr; - gpiop->PUPDR = config->pupdr; - gpiop->ODR = config->odr; - gpiop->AFRL = config->afrl; - gpiop->AFRH = config->afrh; - gpiop->MODER = config->moder; -} - -static void stm32_gpio_init(void) { - - /* Enabling GPIO-related clocks, the mask comes from the - registry header file.*/ - rccResetAHB(STM32_GPIO_EN_MASK); - rccEnableAHB(STM32_GPIO_EN_MASK, true); - - /* Initializing all the defined GPIO ports.*/ -#if STM32_HAS_GPIOA - gpio_init(GPIOA, &gpio_default_config.PAData); -#endif -#if STM32_HAS_GPIOB - gpio_init(GPIOB, &gpio_default_config.PBData); -#endif -#if STM32_HAS_GPIOC - gpio_init(GPIOC, &gpio_default_config.PCData); -#endif -#if STM32_HAS_GPIOD - gpio_init(GPIOD, &gpio_default_config.PDData); -#endif -#if STM32_HAS_GPIOE - gpio_init(GPIOE, &gpio_default_config.PEData); -#endif -#if STM32_HAS_GPIOF - gpio_init(GPIOF, &gpio_default_config.PFData); -#endif -#if STM32_HAS_GPIOG - gpio_init(GPIOG, &gpio_default_config.PGData); -#endif -#if STM32_HAS_GPIOH - gpio_init(GPIOH, &gpio_default_config.PHData); -#endif -#if STM32_HAS_GPIOI - gpio_init(GPIOI, &gpio_default_config.PIData); -#endif -#if STM32_HAS_GPIOJ - gpio_init(GPIOJ, &gpio_default_config.PJData); -#endif -#if STM32_HAS_GPIOK - gpio_init(GPIOK, &gpio_default_config.PKData); -#endif -} - -/*===========================================================================*/ -/* Driver interrupt handlers. */ -/*===========================================================================*/ - -/*===========================================================================*/ -/* Driver exported functions. */ -/*===========================================================================*/ - -/** - * @brief Early initialization code. - * @details GPIO ports and system clocks are initialized before everything - * else. - */ -void __early_init(void) { - extern void enter_bootloader_mode_if_requested(void); - enter_bootloader_mode_if_requested(); - - stm32_gpio_init(); - stm32_clock_init(); -} - -#if HAL_USE_SDC || defined(__DOXYGEN__) -/** - * @brief SDC card detection. - */ -bool sdc_lld_is_card_inserted(SDCDriver *sdcp) { - - (void)sdcp; - /* TODO: Fill the implementation.*/ - return true; -} - -/** - * @brief SDC card write protection detection. - */ -bool sdc_lld_is_write_protected(SDCDriver *sdcp) { - - (void)sdcp; - /* TODO: Fill the implementation.*/ - return false; -} -#endif /* HAL_USE_SDC */ - -#if HAL_USE_MMC_SPI || defined(__DOXYGEN__) -/** - * @brief MMC_SPI card detection. - */ -bool mmc_lld_is_card_inserted(MMCDriver *mmcp) { - - (void)mmcp; - /* TODO: Fill the implementation.*/ - return true; -} - -/** - * @brief MMC_SPI card write protection detection. - */ -bool mmc_lld_is_write_protected(MMCDriver *mmcp) { - - (void)mmcp; - /* TODO: Fill the implementation.*/ - return false; -} -#endif - -/** - * @brief Board-specific initialization code. - * @todo Add your board-specific code, if any. - */ -void boardInit(void) { - -} diff --git a/keyboards/peiorisboards/ixora/boards/GENERIC_STM32_F042X6/board.mk b/keyboards/peiorisboards/ixora/boards/GENERIC_STM32_F042X6/board.mk deleted file mode 100644 index bbeb5bbff7..0000000000 --- a/keyboards/peiorisboards/ixora/boards/GENERIC_STM32_F042X6/board.mk +++ /dev/null @@ -1,5 +0,0 @@ -# List of all the board related files. -BOARDSRC = $(BOARD_PATH)/boards/GENERIC_STM32_F042X6/board.c - -# Required include directories -BOARDINC = $(BOARD_PATH)/boards/GENERIC_STM32_F042X6 diff --git a/keyboards/vinta/boards/GENERIC_STM32_F042X6/board.h b/keyboards/vinta/boards/GENERIC_STM32_F042X6/board.h deleted file mode 100644 index 241d566afa..0000000000 --- a/keyboards/vinta/boards/GENERIC_STM32_F042X6/board.h +++ /dev/null @@ -1,896 +0,0 @@ -/* - ChibiOS - Copyright (C) 2006..2016 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ -#ifndef _BOARD_H -#define _BOARD_H - -/* - * Setup for STMicroelectronics STM32 Nucleo32-F042K6 board. - */ - -/* - * Board identifier. - */ -#define BOARD_GENERIC_STM32_F042X6 -#define BOARD_NAME "Vinta PCB" - -/* - * Board oscillators-related settings. - * NOTE: LSE not fitted. - * NOTE: HSE not fitted. - */ -#if !defined(STM32_LSECLK) -#define STM32_LSECLK 0U -#endif - -#define STM32_LSEDRV (3U << 3U) - -#if !defined(STM32_HSECLK) -#define STM32_HSECLK 0U -#endif - -/* - * MCU type as defined in the ST header. - */ -#define STM32F042x6 - -/* - * IO pins assignments. - */ -#define GPIOA_PIN0 0U -#define GPIOA_PIN1 1U -#define GPIOA_PIN2 2U -#define GPIOA_PIN3 3U -#define GPIOA_PIN4 4U -#define GPIOA_PIN5 5U -#define GPIOA_PIN6 6U -#define GPIOA_PIN7 7U -#define GPIOA_PIN8 8U -#define GPIOA_PIN9 9U -#define GPIOA_PIN10 10U -#define GPIOA_PIN11 11U -#define GPIOA_PIN12 12U -#define GPIOA_PIN13 13U -#define GPIOA_PIN14 14U -#define GPIOA_PIN15 15U - -#define GPIOB_PIN0 0U -#define GPIOB_PIN1 1U -#define GPIOB_PIN2 2U -#define GPIOB_PIN3 3U -#define GPIOB_PIN4 4U -#define GPIOB_PIN5 5U -#define GPIOB_PIN6 6U -#define GPIOB_PIN7 7U -#define GPIOB_PIN8 8U -#define GPIOB_PIN9 9U -#define GPIOB_PIN10 10U -#define GPIOB_PIN11 11U -#define GPIOB_PIN12 12U -#define GPIOB_PIN13 13U -#define GPIOB_PIN14 14U -#define GPIOB_PIN15 15U - -#define GPIOC_PIN0 0U -#define GPIOC_PIN1 1U -#define GPIOC_PIN2 2U -#define GPIOC_PIN3 3U -#define GPIOC_PIN4 4U -#define GPIOC_PIN5 5U -#define GPIOC_PIN6 6U -#define GPIOC_PIN7 7U -#define GPIOC_PIN8 8U -#define GPIOC_PIN9 9U -#define GPIOC_PIN10 10U -#define GPIOC_PIN11 11U -#define GPIOC_PIN12 12U -#define GPIOC_PIN13 13U -#define GPIOC_PIN14 14U -#define GPIOC_PIN15 15U - -#define GPIOD_PIN0 0U -#define GPIOD_PIN1 1U -#define GPIOD_PIN2 2U -#define GPIOD_PIN3 3U -#define GPIOD_PIN4 4U -#define GPIOD_PIN5 5U -#define GPIOD_PIN6 6U -#define GPIOD_PIN7 7U -#define GPIOD_PIN8 8U -#define GPIOD_PIN9 9U -#define GPIOD_PIN10 10U -#define GPIOD_PIN11 11U -#define GPIOD_PIN12 12U -#define GPIOD_PIN13 13U -#define GPIOD_PIN14 14U -#define GPIOD_PIN15 15U - -#define GPIOE_PIN0 0U -#define GPIOE_PIN1 1U -#define GPIOE_PIN2 2U -#define GPIOE_PIN3 3U -#define GPIOE_PIN4 4U -#define GPIOE_PIN5 5U -#define GPIOE_PIN6 6U -#define GPIOE_PIN7 7U -#define GPIOE_PIN8 8U -#define GPIOE_PIN9 9U -#define GPIOE_PIN10 10U -#define GPIOE_PIN11 11U -#define GPIOE_PIN12 12U -#define GPIOE_PIN13 13U -#define GPIOE_PIN14 14U -#define GPIOE_PIN15 15U - -#define GPIOF_PIN0 0U -#define GPIOF_PIN1 1U -#define GPIOF_PIN2 2U -#define GPIOF_PIN3 3U -#define GPIOF_PIN4 4U -#define GPIOF_PIN5 5U -#define GPIOF_PIN6 6U -#define GPIOF_PIN7 7U -#define GPIOF_PIN8 8U -#define GPIOF_PIN9 9U -#define GPIOF_PIN10 10U -#define GPIOF_PIN11 11U -#define GPIOF_PIN12 12U -#define GPIOF_PIN13 13U -#define GPIOF_PIN14 14U -#define GPIOF_PIN15 15U - -/* - * IO lines assignments. - */ - -#define LINE_BOOT0 PAL_LINE(GPIOB, 8U) -#define LINE_SWCLK PAL_LINE(GPIOA, 14U) -#define LINE_SWDIO PAL_LINE(GPIOA, 13U) - -/* - * I/O ports initial setup, this configuration is established soon after reset - * in the initialization code. - * Please refer to the STM32 Reference Manual for details. - */ -#define PIN_MODE_INPUT(n) (0U << ((n) * 2U)) -#define PIN_MODE_OUTPUT(n) (1U << ((n) * 2U)) -#define PIN_MODE_ALTERNATE(n) (2U << ((n) * 2U)) -#define PIN_MODE_ANALOG(n) (3U << ((n) * 2U)) -#define PIN_ODR_LOW(n) (0U << (n)) -#define PIN_ODR_HIGH(n) (1U << (n)) -#define PIN_OTYPE_PUSHPULL(n) (0U << (n)) -#define PIN_OTYPE_OPENDRAIN(n) (1U << (n)) -#define PIN_OSPEED_VERYLOW(n) (0U << ((n) * 2U)) -#define PIN_OSPEED_LOW(n) (1U << ((n) * 2U)) -#define PIN_OSPEED_MEDIUM(n) (2U << ((n) * 2U)) -#define PIN_OSPEED_HIGH(n) (3U << ((n) * 2U)) -#define PIN_PUPDR_FLOATING(n) (0U << ((n) * 2U)) -#define PIN_PUPDR_PULLUP(n) (1U << ((n) * 2U)) -#define PIN_PUPDR_PULLDOWN(n) (2U << ((n) * 2U)) -#define PIN_AFIO_AF(n, v) ((v) << (((n) % 8U) * 4U)) - -/* - * GPIOA setup: - * - * PA0 - COL5 - * PA1 - COL4 - * PA2 - COL3 - * PA3 - COL2 - * PA4 - COL1 - * PA5 - COL0 - * PA6 - ROW4 - * PA7 - ROW3 - * PA8 - NC - * PA9 - ROW1 - * PA10 - ROW0 - * PA11 - USB_DM - * PA12 - USB_DP - * PA13 - COL15/SWDIO (for now, COL15) - * PA14 - COL14/SWCLK (for now, COL14) - * PA15 - COL13 - */ -#define VAL_GPIOA_MODER (PIN_MODE_INPUT(GPIOA_PIN0) | \ - PIN_MODE_INPUT(GPIOA_PIN1) | \ - PIN_MODE_INPUT(GPIOA_PIN2) | \ - PIN_MODE_INPUT(GPIOA_PIN3) | \ - PIN_MODE_INPUT(GPIOA_PIN4) | \ - PIN_MODE_INPUT(GPIOA_PIN5) | \ - PIN_MODE_INPUT(GPIOA_PIN6) | \ - PIN_MODE_INPUT(GPIOA_PIN7) | \ - PIN_MODE_INPUT(GPIOA_PIN8) | \ - PIN_MODE_INPUT(GPIOA_PIN9) | \ - PIN_MODE_INPUT(GPIOA_PIN10) | \ - PIN_MODE_INPUT(GPIOA_PIN11) | \ - PIN_MODE_INPUT(GPIOA_PIN12) | \ - PIN_MODE_INPUT(GPIOA_PIN13) | \ - PIN_MODE_INPUT(GPIOA_PIN14) | \ - PIN_MODE_INPUT(GPIOA_PIN15)) -#define VAL_GPIOA_OTYPER (PIN_OTYPE_PUSHPULL(GPIOA_PIN0) | \ - PIN_OTYPE_PUSHPULL(GPIOA_PIN1) | \ - PIN_OTYPE_PUSHPULL(GPIOA_PIN2) | \ - PIN_OTYPE_PUSHPULL(GPIOA_PIN3) | \ - PIN_OTYPE_PUSHPULL(GPIOA_PIN4) | \ - PIN_OTYPE_PUSHPULL(GPIOA_PIN5) | \ - PIN_OTYPE_PUSHPULL(GPIOA_PIN6) | \ - PIN_OTYPE_PUSHPULL(GPIOA_PIN7) | \ - PIN_OTYPE_PUSHPULL(GPIOA_PIN8) | \ - PIN_OTYPE_PUSHPULL(GPIOA_PIN9) | \ - PIN_OTYPE_PUSHPULL(GPIOA_PIN10) | \ - PIN_OTYPE_PUSHPULL(GPIOA_PIN11) | \ - PIN_OTYPE_PUSHPULL(GPIOA_PIN12) | \ - PIN_OTYPE_PUSHPULL(GPIOA_PIN13) | \ - PIN_OTYPE_PUSHPULL(GPIOA_PIN14) | \ - PIN_OTYPE_PUSHPULL(GPIOA_PIN15)) -#define VAL_GPIOA_OSPEEDR (PIN_OSPEED_VERYLOW(GPIOA_PIN0) | \ - PIN_OSPEED_VERYLOW(GPIOA_PIN1) | \ - PIN_OSPEED_VERYLOW(GPIOA_PIN2) | \ - PIN_OSPEED_VERYLOW(GPIOA_PIN3) | \ - PIN_OSPEED_VERYLOW(GPIOA_PIN4) | \ - PIN_OSPEED_VERYLOW(GPIOA_PIN5) | \ - PIN_OSPEED_VERYLOW(GPIOA_PIN6) | \ - PIN_OSPEED_VERYLOW(GPIOA_PIN7) | \ - PIN_OSPEED_VERYLOW(GPIOA_PIN8) | \ - PIN_OSPEED_VERYLOW(GPIOA_PIN9) | \ - PIN_OSPEED_VERYLOW(GPIOA_PIN10) | \ - PIN_OSPEED_HIGH(GPIOA_PIN11) | \ - PIN_OSPEED_VERYLOW(GPIOA_PIN12) | \ - PIN_OSPEED_VERYLOW(GPIOA_PIN13) | \ - PIN_OSPEED_VERYLOW(GPIOA_PIN14) | \ - PIN_OSPEED_VERYLOW(GPIOA_PIN15)) -#define VAL_GPIOA_PUPDR (PIN_PUPDR_PULLUP(GPIOA_PIN0) | \ - PIN_PUPDR_PULLUP(GPIOA_PIN1) | \ - PIN_PUPDR_PULLUP(GPIOA_PIN2) | \ - PIN_PUPDR_PULLUP(GPIOA_PIN3) | \ - PIN_PUPDR_PULLUP(GPIOA_PIN4) | \ - PIN_PUPDR_PULLUP(GPIOA_PIN5) | \ - PIN_PUPDR_PULLUP(GPIOA_PIN6) | \ - PIN_PUPDR_PULLUP(GPIOA_PIN7) | \ - PIN_PUPDR_PULLUP(GPIOA_PIN8) | \ - PIN_PUPDR_PULLUP(GPIOA_PIN9) | \ - PIN_PUPDR_PULLUP(GPIOA_PIN10) | \ - PIN_PUPDR_FLOATING(GPIOA_PIN11) | \ - PIN_PUPDR_FLOATING(GPIOA_PIN12) | \ - PIN_PUPDR_PULLUP(GPIOA_PIN13) | \ - PIN_PUPDR_PULLUP(GPIOA_PIN14) | \ - PIN_PUPDR_PULLUP(GPIOA_PIN15)) -#define VAL_GPIOA_ODR (PIN_ODR_HIGH(GPIOA_PIN0) | \ - PIN_ODR_HIGH(GPIOA_PIN1) | \ - PIN_ODR_HIGH(GPIOA_PIN2) | \ - PIN_ODR_HIGH(GPIOA_PIN3) | \ - PIN_ODR_HIGH(GPIOA_PIN4) | \ - PIN_ODR_HIGH(GPIOA_PIN5) | \ - PIN_ODR_HIGH(GPIOA_PIN6) | \ - PIN_ODR_HIGH(GPIOA_PIN7) | \ - PIN_ODR_HIGH(GPIOA_PIN8) | \ - PIN_ODR_HIGH(GPIOA_PIN9) | \ - PIN_ODR_HIGH(GPIOA_PIN10) | \ - PIN_ODR_HIGH(GPIOA_PIN11) | \ - PIN_ODR_HIGH(GPIOA_PIN12) | \ - PIN_ODR_HIGH(GPIOA_PIN13) | \ - PIN_ODR_HIGH(GPIOA_PIN14) | \ - PIN_ODR_HIGH(GPIOA_PIN15)) -#define VAL_GPIOA_AFRL (PIN_AFIO_AF(GPIOA_PIN0, 0U) | \ - PIN_AFIO_AF(GPIOA_PIN1, 0U) | \ - PIN_AFIO_AF(GPIOA_PIN2, 0U) | \ - PIN_AFIO_AF(GPIOA_PIN3, 0U) | \ - PIN_AFIO_AF(GPIOA_PIN4, 0U) | \ - PIN_AFIO_AF(GPIOA_PIN5, 0U) | \ - PIN_AFIO_AF(GPIOA_PIN6, 0U) | \ - PIN_AFIO_AF(GPIOA_PIN7, 0U)) -#define VAL_GPIOA_AFRH (PIN_AFIO_AF(GPIOA_PIN8, 0U) | \ - PIN_AFIO_AF(GPIOA_PIN9, 0U) | \ - PIN_AFIO_AF(GPIOA_PIN10, 0U) | \ - PIN_AFIO_AF(GPIOA_PIN11, 0U) | \ - PIN_AFIO_AF(GPIOA_PIN12, 0U) | \ - PIN_AFIO_AF(GPIOA_PIN13, 0U) | \ - PIN_AFIO_AF(GPIOA_PIN14, 0U) | \ - PIN_AFIO_AF(GPIOA_PIN15, 0U)) - -/* - * GPIOB setup: - * - * PB0 - ROW2 - * PB1 - RGB_D - * PB2 - PIN2 (input pullup). - * PB3 - COL12 - * PB4 - COL11 - * PB5 - COL10 - * PB6 - COL9 - * PB7 - COL8 - * PB8 - BOOT0 (set as output for STM32F042) - * PB9 - PIN9 (input pullup). - * PB10 - PIN10 (input pullup). - * PB11 - PIN11 (input pullup). - * PB12 - PIN12 (input pullup). - * PB13 - PIN13 (input pullup). - * PB14 - PIN14 (input pullup). - * PB15 - PIN15 (input pullup). - */ -#define VAL_GPIOB_MODER (PIN_MODE_INPUT(GPIOB_PIN0) | \ - PIN_MODE_OUTPUT(GPIOB_PIN1) | \ - PIN_MODE_INPUT(GPIOB_PIN2) | \ - PIN_MODE_INPUT(GPIOB_PIN3) | \ - PIN_MODE_INPUT(GPIOB_PIN4) | \ - PIN_MODE_INPUT(GPIOB_PIN5) | \ - PIN_MODE_INPUT(GPIOB_PIN6) | \ - PIN_MODE_INPUT(GPIOB_PIN7) | \ - PIN_MODE_OUTPUT(GPIOB_PIN8) | \ - PIN_MODE_INPUT(GPIOB_PIN9) | \ - PIN_MODE_INPUT(GPIOB_PIN10) | \ - PIN_MODE_INPUT(GPIOB_PIN11) | \ - PIN_MODE_INPUT(GPIOB_PIN12) | \ - PIN_MODE_INPUT(GPIOB_PIN13) | \ - PIN_MODE_INPUT(GPIOB_PIN14) | \ - PIN_MODE_INPUT(GPIOB_PIN15)) -#define VAL_GPIOB_OTYPER (PIN_OTYPE_PUSHPULL(GPIOB_PIN0) | \ - PIN_OTYPE_PUSHPULL(GPIOB_PIN1) | \ - PIN_OTYPE_PUSHPULL(GPIOB_PIN2) | \ - PIN_OTYPE_PUSHPULL(GPIOB_PIN3) | \ - PIN_OTYPE_PUSHPULL(GPIOB_PIN4) | \ - PIN_OTYPE_PUSHPULL(GPIOB_PIN5) | \ - PIN_OTYPE_PUSHPULL(GPIOB_PIN6) | \ - PIN_OTYPE_PUSHPULL(GPIOB_PIN7) | \ - PIN_OTYPE_PUSHPULL(GPIOB_PIN8) | \ - PIN_OTYPE_PUSHPULL(GPIOB_PIN9) | \ - PIN_OTYPE_PUSHPULL(GPIOB_PIN10) | \ - PIN_OTYPE_PUSHPULL(GPIOB_PIN11) | \ - PIN_OTYPE_PUSHPULL(GPIOB_PIN12) | \ - PIN_OTYPE_PUSHPULL(GPIOB_PIN13) | \ - PIN_OTYPE_PUSHPULL(GPIOB_PIN14) | \ - PIN_OTYPE_PUSHPULL(GPIOB_PIN15)) -#define VAL_GPIOB_OSPEEDR (PIN_OSPEED_VERYLOW(GPIOB_PIN0) | \ - PIN_OSPEED_HIGH(GPIOB_PIN1) | \ - PIN_OSPEED_HIGH(GPIOB_PIN2) | \ - PIN_OSPEED_VERYLOW(GPIOB_PIN3) | \ - PIN_OSPEED_VERYLOW(GPIOB_PIN4) | \ - PIN_OSPEED_VERYLOW(GPIOB_PIN5) | \ - PIN_OSPEED_VERYLOW(GPIOB_PIN6) | \ - PIN_OSPEED_VERYLOW(GPIOB_PIN7) | \ - PIN_OSPEED_VERYLOW(GPIOB_PIN8) | \ - PIN_OSPEED_HIGH(GPIOB_PIN9) | \ - PIN_OSPEED_HIGH(GPIOB_PIN10) | \ - PIN_OSPEED_HIGH(GPIOB_PIN11) | \ - PIN_OSPEED_HIGH(GPIOB_PIN12) | \ - PIN_OSPEED_HIGH(GPIOB_PIN13) | \ - PIN_OSPEED_HIGH(GPIOB_PIN14) | \ - PIN_OSPEED_HIGH(GPIOB_PIN15)) -#define VAL_GPIOB_PUPDR (PIN_PUPDR_PULLUP(GPIOB_PIN0) | \ - PIN_PUPDR_FLOATING(GPIOB_PIN1) | \ - PIN_PUPDR_PULLUP(GPIOB_PIN2) | \ - PIN_PUPDR_PULLUP(GPIOB_PIN3) | \ - PIN_PUPDR_PULLUP(GPIOB_PIN4) | \ - PIN_PUPDR_PULLUP(GPIOB_PIN5) | \ - PIN_PUPDR_PULLUP(GPIOB_PIN6) | \ - PIN_PUPDR_PULLUP(GPIOB_PIN7) | \ - PIN_PUPDR_PULLDOWN(GPIOB_PIN8) | \ - PIN_PUPDR_PULLUP(GPIOB_PIN9) | \ - PIN_PUPDR_PULLUP(GPIOB_PIN10) | \ - PIN_PUPDR_PULLUP(GPIOB_PIN11) | \ - PIN_PUPDR_PULLUP(GPIOB_PIN12) | \ - PIN_PUPDR_PULLUP(GPIOB_PIN13) | \ - PIN_PUPDR_PULLUP(GPIOB_PIN14) | \ - PIN_PUPDR_PULLUP(GPIOB_PIN15)) -#define VAL_GPIOB_ODR (PIN_ODR_HIGH(GPIOB_PIN0) | \ - PIN_ODR_HIGH(GPIOB_PIN1) | \ - PIN_ODR_HIGH(GPIOB_PIN2) | \ - PIN_ODR_HIGH(GPIOB_PIN3) | \ - PIN_ODR_HIGH(GPIOB_PIN4) | \ - PIN_ODR_HIGH(GPIOB_PIN5) | \ - PIN_ODR_HIGH(GPIOB_PIN6) | \ - PIN_ODR_HIGH(GPIOB_PIN7) | \ - PIN_ODR_HIGH(GPIOB_PIN8) | \ - PIN_ODR_HIGH(GPIOB_PIN9) | \ - PIN_ODR_HIGH(GPIOB_PIN10) | \ - PIN_ODR_HIGH(GPIOB_PIN11) | \ - PIN_ODR_HIGH(GPIOB_PIN12) | \ - PIN_ODR_HIGH(GPIOB_PIN13) | \ - PIN_ODR_HIGH(GPIOB_PIN14) | \ - PIN_ODR_HIGH(GPIOB_PIN15)) -#define VAL_GPIOB_AFRL (PIN_AFIO_AF(GPIOB_PIN0, 0U) | \ - PIN_AFIO_AF(GPIOB_PIN1, 0U) | \ - PIN_AFIO_AF(GPIOB_PIN2, 0U) | \ - PIN_AFIO_AF(GPIOB_PIN3, 0U) | \ - PIN_AFIO_AF(GPIOB_PIN4, 0U) | \ - PIN_AFIO_AF(GPIOB_PIN5, 0U) | \ - PIN_AFIO_AF(GPIOB_PIN6, 0U) | \ - PIN_AFIO_AF(GPIOB_PIN7, 0U)) -#define VAL_GPIOB_AFRH (PIN_AFIO_AF(GPIOB_PIN8, 0U) | \ - PIN_AFIO_AF(GPIOB_PIN9, 0U) | \ - PIN_AFIO_AF(GPIOB_PIN10, 0U) | \ - PIN_AFIO_AF(GPIOB_PIN11, 0U) | \ - PIN_AFIO_AF(GPIOB_PIN12, 0U) | \ - PIN_AFIO_AF(GPIOB_PIN13, 0U) | \ - PIN_AFIO_AF(GPIOB_PIN14, 0U) | \ - PIN_AFIO_AF(GPIOB_PIN15, 0U)) - -/* - * GPIOC setup: - * - * PC0 - PIN0 (input pullup). - * PC1 - PIN1 (input pullup). - * PC2 - PIN2 (input pullup). - * PC3 - PIN3 (input pullup). - * PC4 - PIN4 (input pullup). - * PC5 - PIN5 (input pullup). - * PC6 - PIN6 (input pullup). - * PC7 - PIN7 (input pullup). - * PC8 - PIN8 (input pullup). - * PC9 - PIN9 (input pullup). - * PC10 - PIN10 (input pullup). - * PC11 - PIN11 (input pullup). - * PC12 - PIN12 (input pullup). - * PC13 - PIN13 (input pullup). - * PC14 - PIN14 (input pullup). - * PC15 - PIN15 (input pullup). - */ -#define VAL_GPIOC_MODER (PIN_MODE_INPUT(GPIOC_PIN0) | \ - PIN_MODE_INPUT(GPIOC_PIN1) | \ - PIN_MODE_INPUT(GPIOC_PIN2) | \ - PIN_MODE_INPUT(GPIOC_PIN3) | \ - PIN_MODE_INPUT(GPIOC_PIN4) | \ - PIN_MODE_INPUT(GPIOC_PIN5) | \ - PIN_MODE_INPUT(GPIOC_PIN6) | \ - PIN_MODE_INPUT(GPIOC_PIN7) | \ - PIN_MODE_INPUT(GPIOC_PIN8) | \ - PIN_MODE_INPUT(GPIOC_PIN9) | \ - PIN_MODE_INPUT(GPIOC_PIN10) | \ - PIN_MODE_INPUT(GPIOC_PIN11) | \ - PIN_MODE_INPUT(GPIOC_PIN12) | \ - PIN_MODE_INPUT(GPIOC_PIN13) | \ - PIN_MODE_INPUT(GPIOC_PIN14) | \ - PIN_MODE_INPUT(GPIOC_PIN15)) -#define VAL_GPIOC_OTYPER (PIN_OTYPE_PUSHPULL(GPIOC_PIN0) | \ - PIN_OTYPE_PUSHPULL(GPIOC_PIN1) | \ - PIN_OTYPE_PUSHPULL(GPIOC_PIN2) | \ - PIN_OTYPE_PUSHPULL(GPIOC_PIN3) | \ - PIN_OTYPE_PUSHPULL(GPIOC_PIN4) | \ - PIN_OTYPE_PUSHPULL(GPIOC_PIN5) | \ - PIN_OTYPE_PUSHPULL(GPIOC_PIN6) | \ - PIN_OTYPE_PUSHPULL(GPIOC_PIN7) | \ - PIN_OTYPE_PUSHPULL(GPIOC_PIN8) | \ - PIN_OTYPE_PUSHPULL(GPIOC_PIN9) | \ - PIN_OTYPE_PUSHPULL(GPIOC_PIN10) | \ - PIN_OTYPE_PUSHPULL(GPIOC_PIN11) | \ - PIN_OTYPE_PUSHPULL(GPIOC_PIN12) | \ - PIN_OTYPE_PUSHPULL(GPIOC_PIN13) | \ - PIN_OTYPE_PUSHPULL(GPIOC_PIN14) | \ - PIN_OTYPE_PUSHPULL(GPIOC_PIN15)) -#define VAL_GPIOC_OSPEEDR (PIN_OSPEED_HIGH(GPIOC_PIN0) | \ - PIN_OSPEED_HIGH(GPIOC_PIN1) | \ - PIN_OSPEED_HIGH(GPIOC_PIN2) | \ - PIN_OSPEED_HIGH(GPIOC_PIN3) | \ - PIN_OSPEED_HIGH(GPIOC_PIN4) | \ - PIN_OSPEED_HIGH(GPIOC_PIN5) | \ - PIN_OSPEED_HIGH(GPIOC_PIN6) | \ - PIN_OSPEED_HIGH(GPIOC_PIN7) | \ - PIN_OSPEED_HIGH(GPIOC_PIN8) | \ - PIN_OSPEED_HIGH(GPIOC_PIN9) | \ - PIN_OSPEED_HIGH(GPIOC_PIN10) | \ - PIN_OSPEED_HIGH(GPIOC_PIN11) | \ - PIN_OSPEED_HIGH(GPIOC_PIN12) | \ - PIN_OSPEED_HIGH(GPIOC_PIN13) | \ - PIN_OSPEED_HIGH(GPIOC_PIN14) | \ - PIN_OSPEED_HIGH(GPIOC_PIN15)) -#define VAL_GPIOC_PUPDR (PIN_PUPDR_PULLUP(GPIOC_PIN0) | \ - PIN_PUPDR_PULLUP(GPIOC_PIN1) | \ - PIN_PUPDR_PULLUP(GPIOC_PIN2) | \ - PIN_PUPDR_PULLUP(GPIOC_PIN3) | \ - PIN_PUPDR_PULLUP(GPIOC_PIN4) | \ - PIN_PUPDR_PULLUP(GPIOC_PIN5) | \ - PIN_PUPDR_PULLUP(GPIOC_PIN6) | \ - PIN_PUPDR_PULLUP(GPIOC_PIN7) | \ - PIN_PUPDR_PULLUP(GPIOC_PIN8) | \ - PIN_PUPDR_PULLUP(GPIOC_PIN9) | \ - PIN_PUPDR_PULLUP(GPIOC_PIN10) | \ - PIN_PUPDR_PULLUP(GPIOC_PIN11) | \ - PIN_PUPDR_PULLUP(GPIOC_PIN12) | \ - PIN_PUPDR_PULLUP(GPIOC_PIN13) | \ - PIN_PUPDR_PULLUP(GPIOC_PIN14) | \ - PIN_PUPDR_PULLUP(GPIOC_PIN15)) -#define VAL_GPIOC_ODR (PIN_ODR_HIGH(GPIOC_PIN0) | \ - PIN_ODR_HIGH(GPIOC_PIN1) | \ - PIN_ODR_HIGH(GPIOC_PIN2) | \ - PIN_ODR_HIGH(GPIOC_PIN3) | \ - PIN_ODR_HIGH(GPIOC_PIN4) | \ - PIN_ODR_HIGH(GPIOC_PIN5) | \ - PIN_ODR_HIGH(GPIOC_PIN6) | \ - PIN_ODR_HIGH(GPIOC_PIN7) | \ - PIN_ODR_HIGH(GPIOC_PIN8) | \ - PIN_ODR_HIGH(GPIOC_PIN9) | \ - PIN_ODR_HIGH(GPIOC_PIN10) | \ - PIN_ODR_HIGH(GPIOC_PIN11) | \ - PIN_ODR_HIGH(GPIOC_PIN12) | \ - PIN_ODR_HIGH(GPIOC_PIN13) | \ - PIN_ODR_HIGH(GPIOC_PIN14) | \ - PIN_ODR_HIGH(GPIOC_PIN15)) -#define VAL_GPIOC_AFRL (PIN_AFIO_AF(GPIOC_PIN0, 0U) | \ - PIN_AFIO_AF(GPIOC_PIN1, 0U) | \ - PIN_AFIO_AF(GPIOC_PIN2, 0U) | \ - PIN_AFIO_AF(GPIOC_PIN3, 0U) | \ - PIN_AFIO_AF(GPIOC_PIN4, 0U) | \ - PIN_AFIO_AF(GPIOC_PIN5, 0U) | \ - PIN_AFIO_AF(GPIOC_PIN6, 0U) | \ - PIN_AFIO_AF(GPIOC_PIN7, 0U)) -#define VAL_GPIOC_AFRH (PIN_AFIO_AF(GPIOC_PIN8, 0U) | \ - PIN_AFIO_AF(GPIOC_PIN9, 0U) | \ - PIN_AFIO_AF(GPIOC_PIN10, 0U) | \ - PIN_AFIO_AF(GPIOC_PIN11, 0U) | \ - PIN_AFIO_AF(GPIOC_PIN12, 0U) | \ - PIN_AFIO_AF(GPIOC_PIN13, 0U) | \ - PIN_AFIO_AF(GPIOC_PIN14, 0U) | \ - PIN_AFIO_AF(GPIOC_PIN15, 0U)) - -/* - * GPIOD setup: - * - * PD0 - PIN0 (input pullup). - * PD1 - PIN1 (input pullup). - * PD2 - PIN2 (input pullup). - * PD3 - PIN3 (input pullup). - * PD4 - PIN4 (input pullup). - * PD5 - PIN5 (input pullup). - * PD6 - PIN6 (input pullup). - * PD7 - PIN7 (input pullup). - * PD8 - PIN8 (input pullup). - * PD9 - PIN9 (input pullup). - * PD10 - PIN10 (input pullup). - * PD11 - PIN11 (input pullup). - * PD12 - PIN12 (input pullup). - * PD13 - PIN13 (input pullup). - * PD14 - PIN14 (input pullup). - * PD15 - PIN15 (input pullup). - */ -#define VAL_GPIOD_MODER (PIN_MODE_INPUT(GPIOD_PIN0) | \ - PIN_MODE_INPUT(GPIOD_PIN1) | \ - PIN_MODE_INPUT(GPIOD_PIN2) | \ - PIN_MODE_INPUT(GPIOD_PIN3) | \ - PIN_MODE_INPUT(GPIOD_PIN4) | \ - PIN_MODE_INPUT(GPIOD_PIN5) | \ - PIN_MODE_INPUT(GPIOD_PIN6) | \ - PIN_MODE_INPUT(GPIOD_PIN7) | \ - PIN_MODE_INPUT(GPIOD_PIN8) | \ - PIN_MODE_INPUT(GPIOD_PIN9) | \ - PIN_MODE_INPUT(GPIOD_PIN10) | \ - PIN_MODE_INPUT(GPIOD_PIN11) | \ - PIN_MODE_INPUT(GPIOD_PIN12) | \ - PIN_MODE_INPUT(GPIOD_PIN13) | \ - PIN_MODE_INPUT(GPIOD_PIN14) | \ - PIN_MODE_INPUT(GPIOD_PIN15)) -#define VAL_GPIOD_OTYPER (PIN_OTYPE_PUSHPULL(GPIOD_PIN0) | \ - PIN_OTYPE_PUSHPULL(GPIOD_PIN1) | \ - PIN_OTYPE_PUSHPULL(GPIOD_PIN2) | \ - PIN_OTYPE_PUSHPULL(GPIOD_PIN3) | \ - PIN_OTYPE_PUSHPULL(GPIOD_PIN4) | \ - PIN_OTYPE_PUSHPULL(GPIOD_PIN5) | \ - PIN_OTYPE_PUSHPULL(GPIOD_PIN6) | \ - PIN_OTYPE_PUSHPULL(GPIOD_PIN7) | \ - PIN_OTYPE_PUSHPULL(GPIOD_PIN8) | \ - PIN_OTYPE_PUSHPULL(GPIOD_PIN9) | \ - PIN_OTYPE_PUSHPULL(GPIOD_PIN10) | \ - PIN_OTYPE_PUSHPULL(GPIOD_PIN11) | \ - PIN_OTYPE_PUSHPULL(GPIOD_PIN12) | \ - PIN_OTYPE_PUSHPULL(GPIOD_PIN13) | \ - PIN_OTYPE_PUSHPULL(GPIOD_PIN14) | \ - PIN_OTYPE_PUSHPULL(GPIOD_PIN15)) -#define VAL_GPIOD_OSPEEDR (PIN_OSPEED_HIGH(GPIOD_PIN0) | \ - PIN_OSPEED_HIGH(GPIOD_PIN1) | \ - PIN_OSPEED_HIGH(GPIOD_PIN2) | \ - PIN_OSPEED_HIGH(GPIOD_PIN3) | \ - PIN_OSPEED_HIGH(GPIOD_PIN4) | \ - PIN_OSPEED_HIGH(GPIOD_PIN5) | \ - PIN_OSPEED_HIGH(GPIOD_PIN6) | \ - PIN_OSPEED_HIGH(GPIOD_PIN7) | \ - PIN_OSPEED_HIGH(GPIOD_PIN8) | \ - PIN_OSPEED_HIGH(GPIOD_PIN9) | \ - PIN_OSPEED_HIGH(GPIOD_PIN10) | \ - PIN_OSPEED_HIGH(GPIOD_PIN11) | \ - PIN_OSPEED_HIGH(GPIOD_PIN12) | \ - PIN_OSPEED_HIGH(GPIOD_PIN13) | \ - PIN_OSPEED_HIGH(GPIOD_PIN14) | \ - PIN_OSPEED_HIGH(GPIOD_PIN15)) -#define VAL_GPIOD_PUPDR (PIN_PUPDR_PULLUP(GPIOD_PIN0) | \ - PIN_PUPDR_PULLUP(GPIOD_PIN1) | \ - PIN_PUPDR_PULLUP(GPIOD_PIN2) | \ - PIN_PUPDR_PULLUP(GPIOD_PIN3) | \ - PIN_PUPDR_PULLUP(GPIOD_PIN4) | \ - PIN_PUPDR_PULLUP(GPIOD_PIN5) | \ - PIN_PUPDR_PULLUP(GPIOD_PIN6) | \ - PIN_PUPDR_PULLUP(GPIOD_PIN7) | \ - PIN_PUPDR_PULLUP(GPIOD_PIN8) | \ - PIN_PUPDR_PULLUP(GPIOD_PIN9) | \ - PIN_PUPDR_PULLUP(GPIOD_PIN10) | \ - PIN_PUPDR_PULLUP(GPIOD_PIN11) | \ - PIN_PUPDR_PULLUP(GPIOD_PIN12) | \ - PIN_PUPDR_PULLUP(GPIOD_PIN13) | \ - PIN_PUPDR_PULLUP(GPIOD_PIN14) | \ - PIN_PUPDR_PULLUP(GPIOD_PIN15)) -#define VAL_GPIOD_ODR (PIN_ODR_HIGH(GPIOD_PIN0) | \ - PIN_ODR_HIGH(GPIOD_PIN1) | \ - PIN_ODR_HIGH(GPIOD_PIN2) | \ - PIN_ODR_HIGH(GPIOD_PIN3) | \ - PIN_ODR_HIGH(GPIOD_PIN4) | \ - PIN_ODR_HIGH(GPIOD_PIN5) | \ - PIN_ODR_HIGH(GPIOD_PIN6) | \ - PIN_ODR_HIGH(GPIOD_PIN7) | \ - PIN_ODR_HIGH(GPIOD_PIN8) | \ - PIN_ODR_HIGH(GPIOD_PIN9) | \ - PIN_ODR_HIGH(GPIOD_PIN10) | \ - PIN_ODR_HIGH(GPIOD_PIN11) | \ - PIN_ODR_HIGH(GPIOD_PIN12) | \ - PIN_ODR_HIGH(GPIOD_PIN13) | \ - PIN_ODR_HIGH(GPIOD_PIN14) | \ - PIN_ODR_HIGH(GPIOD_PIN15)) -#define VAL_GPIOD_AFRL (PIN_AFIO_AF(GPIOD_PIN0, 0U) | \ - PIN_AFIO_AF(GPIOD_PIN1, 0U) | \ - PIN_AFIO_AF(GPIOD_PIN2, 0U) | \ - PIN_AFIO_AF(GPIOD_PIN3, 0U) | \ - PIN_AFIO_AF(GPIOD_PIN4, 0U) | \ - PIN_AFIO_AF(GPIOD_PIN5, 0U) | \ - PIN_AFIO_AF(GPIOD_PIN6, 0U) | \ - PIN_AFIO_AF(GPIOD_PIN7, 0U)) -#define VAL_GPIOD_AFRH (PIN_AFIO_AF(GPIOD_PIN8, 0U) | \ - PIN_AFIO_AF(GPIOD_PIN9, 0U) | \ - PIN_AFIO_AF(GPIOD_PIN10, 0U) | \ - PIN_AFIO_AF(GPIOD_PIN11, 0U) | \ - PIN_AFIO_AF(GPIOD_PIN12, 0U) | \ - PIN_AFIO_AF(GPIOD_PIN13, 0U) | \ - PIN_AFIO_AF(GPIOD_PIN14, 0U) | \ - PIN_AFIO_AF(GPIOD_PIN15, 0U)) - -/* - * GPIOE setup: - * - * PE0 - PIN0 (input pullup). - * PE1 - PIN1 (input pullup). - * PE2 - PIN2 (input pullup). - * PE3 - PIN3 (input pullup). - * PE4 - PIN4 (input pullup). - * PE5 - PIN5 (input pullup). - * PE6 - PIN6 (input pullup). - * PE7 - PIN7 (input pullup). - * PE8 - PIN8 (input pullup). - * PE9 - PIN9 (input pullup). - * PE10 - PIN10 (input pullup). - * PE11 - PIN11 (input pullup). - * PE12 - PIN12 (input pullup). - * PE13 - PIN13 (input pullup). - * PE14 - PIN14 (input pullup). - * PE15 - PIN15 (input pullup). - */ -#define VAL_GPIOE_MODER (PIN_MODE_INPUT(GPIOE_PIN0) | \ - PIN_MODE_INPUT(GPIOE_PIN1) | \ - PIN_MODE_INPUT(GPIOE_PIN2) | \ - PIN_MODE_INPUT(GPIOE_PIN3) | \ - PIN_MODE_INPUT(GPIOE_PIN4) | \ - PIN_MODE_INPUT(GPIOE_PIN5) | \ - PIN_MODE_INPUT(GPIOE_PIN6) | \ - PIN_MODE_INPUT(GPIOE_PIN7) | \ - PIN_MODE_INPUT(GPIOE_PIN8) | \ - PIN_MODE_INPUT(GPIOE_PIN9) | \ - PIN_MODE_INPUT(GPIOE_PIN10) | \ - PIN_MODE_INPUT(GPIOE_PIN11) | \ - PIN_MODE_INPUT(GPIOE_PIN12) | \ - PIN_MODE_INPUT(GPIOE_PIN13) | \ - PIN_MODE_INPUT(GPIOE_PIN14) | \ - PIN_MODE_INPUT(GPIOE_PIN15)) -#define VAL_GPIOE_OTYPER (PIN_OTYPE_PUSHPULL(GPIOE_PIN0) | \ - PIN_OTYPE_PUSHPULL(GPIOE_PIN1) | \ - PIN_OTYPE_PUSHPULL(GPIOE_PIN2) | \ - PIN_OTYPE_PUSHPULL(GPIOE_PIN3) | \ - PIN_OTYPE_PUSHPULL(GPIOE_PIN4) | \ - PIN_OTYPE_PUSHPULL(GPIOE_PIN5) | \ - PIN_OTYPE_PUSHPULL(GPIOE_PIN6) | \ - PIN_OTYPE_PUSHPULL(GPIOE_PIN7) | \ - PIN_OTYPE_PUSHPULL(GPIOE_PIN8) | \ - PIN_OTYPE_PUSHPULL(GPIOE_PIN9) | \ - PIN_OTYPE_PUSHPULL(GPIOE_PIN10) | \ - PIN_OTYPE_PUSHPULL(GPIOE_PIN11) | \ - PIN_OTYPE_PUSHPULL(GPIOE_PIN12) | \ - PIN_OTYPE_PUSHPULL(GPIOE_PIN13) | \ - PIN_OTYPE_PUSHPULL(GPIOE_PIN14) | \ - PIN_OTYPE_PUSHPULL(GPIOE_PIN15)) -#define VAL_GPIOE_OSPEEDR (PIN_OSPEED_HIGH(GPIOE_PIN0) | \ - PIN_OSPEED_HIGH(GPIOE_PIN1) | \ - PIN_OSPEED_HIGH(GPIOE_PIN2) | \ - PIN_OSPEED_HIGH(GPIOE_PIN3) | \ - PIN_OSPEED_HIGH(GPIOE_PIN4) | \ - PIN_OSPEED_HIGH(GPIOE_PIN5) | \ - PIN_OSPEED_HIGH(GPIOE_PIN6) | \ - PIN_OSPEED_HIGH(GPIOE_PIN7) | \ - PIN_OSPEED_HIGH(GPIOE_PIN8) | \ - PIN_OSPEED_HIGH(GPIOE_PIN9) | \ - PIN_OSPEED_HIGH(GPIOE_PIN10) | \ - PIN_OSPEED_HIGH(GPIOE_PIN11) | \ - PIN_OSPEED_HIGH(GPIOE_PIN12) | \ - PIN_OSPEED_HIGH(GPIOE_PIN13) | \ - PIN_OSPEED_HIGH(GPIOE_PIN14) | \ - PIN_OSPEED_HIGH(GPIOE_PIN15)) -#define VAL_GPIOE_PUPDR (PIN_PUPDR_PULLUP(GPIOE_PIN0) | \ - PIN_PUPDR_PULLUP(GPIOE_PIN1) | \ - PIN_PUPDR_PULLUP(GPIOE_PIN2) | \ - PIN_PUPDR_PULLUP(GPIOE_PIN3) | \ - PIN_PUPDR_PULLUP(GPIOE_PIN4) | \ - PIN_PUPDR_PULLUP(GPIOE_PIN5) | \ - PIN_PUPDR_PULLUP(GPIOE_PIN6) | \ - PIN_PUPDR_PULLUP(GPIOE_PIN7) | \ - PIN_PUPDR_PULLUP(GPIOE_PIN8) | \ - PIN_PUPDR_PULLUP(GPIOE_PIN9) | \ - PIN_PUPDR_PULLUP(GPIOE_PIN10) | \ - PIN_PUPDR_PULLUP(GPIOE_PIN11) | \ - PIN_PUPDR_PULLUP(GPIOE_PIN12) | \ - PIN_PUPDR_PULLUP(GPIOE_PIN13) | \ - PIN_PUPDR_PULLUP(GPIOE_PIN14) | \ - PIN_PUPDR_PULLUP(GPIOE_PIN15)) -#define VAL_GPIOE_ODR (PIN_ODR_HIGH(GPIOE_PIN0) | \ - PIN_ODR_HIGH(GPIOE_PIN1) | \ - PIN_ODR_HIGH(GPIOE_PIN2) | \ - PIN_ODR_HIGH(GPIOE_PIN3) | \ - PIN_ODR_HIGH(GPIOE_PIN4) | \ - PIN_ODR_HIGH(GPIOE_PIN5) | \ - PIN_ODR_HIGH(GPIOE_PIN6) | \ - PIN_ODR_HIGH(GPIOE_PIN7) | \ - PIN_ODR_HIGH(GPIOE_PIN8) | \ - PIN_ODR_HIGH(GPIOE_PIN9) | \ - PIN_ODR_HIGH(GPIOE_PIN10) | \ - PIN_ODR_HIGH(GPIOE_PIN11) | \ - PIN_ODR_HIGH(GPIOE_PIN12) | \ - PIN_ODR_HIGH(GPIOE_PIN13) | \ - PIN_ODR_HIGH(GPIOE_PIN14) | \ - PIN_ODR_HIGH(GPIOE_PIN15)) -#define VAL_GPIOE_AFRL (PIN_AFIO_AF(GPIOE_PIN0, 0U) | \ - PIN_AFIO_AF(GPIOE_PIN1, 0U) | \ - PIN_AFIO_AF(GPIOE_PIN2, 0U) | \ - PIN_AFIO_AF(GPIOE_PIN3, 0U) | \ - PIN_AFIO_AF(GPIOE_PIN4, 0U) | \ - PIN_AFIO_AF(GPIOE_PIN5, 0U) | \ - PIN_AFIO_AF(GPIOE_PIN6, 0U) | \ - PIN_AFIO_AF(GPIOE_PIN7, 0U)) -#define VAL_GPIOE_AFRH (PIN_AFIO_AF(GPIOE_PIN8, 0U) | \ - PIN_AFIO_AF(GPIOE_PIN9, 0U) | \ - PIN_AFIO_AF(GPIOE_PIN10, 0U) | \ - PIN_AFIO_AF(GPIOE_PIN11, 0U) | \ - PIN_AFIO_AF(GPIOE_PIN12, 0U) | \ - PIN_AFIO_AF(GPIOE_PIN13, 0U) | \ - PIN_AFIO_AF(GPIOE_PIN14, 0U) | \ - PIN_AFIO_AF(GPIOE_PIN15, 0U)) - -/* - * GPIOF setup: - * - * PF0 - COL7 - * PF1 - COL6 - * PF2 - PIN2 (input pullup). - * PF3 - PIN3 (input pullup). - * PF4 - PIN4 (input pullup). - * PF5 - PIN5 (input pullup). - * PF6 - PIN6 (input pullup). - * PF7 - PIN7 (input pullup). - * PF8 - PIN8 (input pullup). - * PF9 - PIN9 (input pullup). - * PF10 - PIN10 (input pullup). - * PF11 - PIN11 (input pullup). - * PF12 - PIN12 (input pullup). - * PF13 - PIN13 (input pullup). - * PF14 - PIN14 (input pullup). - * PF15 - PIN15 (input pullup). - */ -#define VAL_GPIOF_MODER (PIN_MODE_INPUT(GPIOF_PIN0) | \ - PIN_MODE_INPUT(GPIOF_PIN1) | \ - PIN_MODE_INPUT(GPIOF_PIN2) | \ - PIN_MODE_INPUT(GPIOF_PIN3) | \ - PIN_MODE_INPUT(GPIOF_PIN4) | \ - PIN_MODE_INPUT(GPIOF_PIN5) | \ - PIN_MODE_INPUT(GPIOF_PIN6) | \ - PIN_MODE_INPUT(GPIOF_PIN7) | \ - PIN_MODE_INPUT(GPIOF_PIN8) | \ - PIN_MODE_INPUT(GPIOF_PIN9) | \ - PIN_MODE_INPUT(GPIOF_PIN10) | \ - PIN_MODE_INPUT(GPIOF_PIN11) | \ - PIN_MODE_INPUT(GPIOF_PIN12) | \ - PIN_MODE_INPUT(GPIOF_PIN13) | \ - PIN_MODE_INPUT(GPIOF_PIN14) | \ - PIN_MODE_INPUT(GPIOF_PIN15)) -#define VAL_GPIOF_OTYPER (PIN_OTYPE_PUSHPULL(GPIOF_PIN0) | \ - PIN_OTYPE_PUSHPULL(GPIOF_PIN1) | \ - PIN_OTYPE_PUSHPULL(GPIOF_PIN2) | \ - PIN_OTYPE_PUSHPULL(GPIOF_PIN3) | \ - PIN_OTYPE_PUSHPULL(GPIOF_PIN4) | \ - PIN_OTYPE_PUSHPULL(GPIOF_PIN5) | \ - PIN_OTYPE_PUSHPULL(GPIOF_PIN6) | \ - PIN_OTYPE_PUSHPULL(GPIOF_PIN7) | \ - PIN_OTYPE_PUSHPULL(GPIOF_PIN8) | \ - PIN_OTYPE_PUSHPULL(GPIOF_PIN9) | \ - PIN_OTYPE_PUSHPULL(GPIOF_PIN10) | \ - PIN_OTYPE_PUSHPULL(GPIOF_PIN11) | \ - PIN_OTYPE_PUSHPULL(GPIOF_PIN12) | \ - PIN_OTYPE_PUSHPULL(GPIOF_PIN13) | \ - PIN_OTYPE_PUSHPULL(GPIOF_PIN14) | \ - PIN_OTYPE_PUSHPULL(GPIOF_PIN15)) -#define VAL_GPIOF_OSPEEDR (PIN_OSPEED_VERYLOW(GPIOF_PIN0) | \ - PIN_OSPEED_VERYLOW(GPIOF_PIN1) | \ - PIN_OSPEED_HIGH(GPIOF_PIN2) | \ - PIN_OSPEED_HIGH(GPIOF_PIN3) | \ - PIN_OSPEED_HIGH(GPIOF_PIN4) | \ - PIN_OSPEED_HIGH(GPIOF_PIN5) | \ - PIN_OSPEED_HIGH(GPIOF_PIN6) | \ - PIN_OSPEED_HIGH(GPIOF_PIN7) | \ - PIN_OSPEED_HIGH(GPIOF_PIN8) | \ - PIN_OSPEED_HIGH(GPIOF_PIN9) | \ - PIN_OSPEED_HIGH(GPIOF_PIN10) | \ - PIN_OSPEED_HIGH(GPIOF_PIN11) | \ - PIN_OSPEED_HIGH(GPIOF_PIN12) | \ - PIN_OSPEED_HIGH(GPIOF_PIN13) | \ - PIN_OSPEED_HIGH(GPIOF_PIN14) | \ - PIN_OSPEED_HIGH(GPIOF_PIN15)) -#define VAL_GPIOF_PUPDR (PIN_PUPDR_PULLUP(GPIOF_PIN0) | \ - PIN_PUPDR_PULLUP(GPIOF_PIN1) | \ - PIN_PUPDR_PULLUP(GPIOF_PIN2) | \ - PIN_PUPDR_PULLUP(GPIOF_PIN3) | \ - PIN_PUPDR_PULLUP(GPIOF_PIN4) | \ - PIN_PUPDR_PULLUP(GPIOF_PIN5) | \ - PIN_PUPDR_PULLUP(GPIOF_PIN6) | \ - PIN_PUPDR_PULLUP(GPIOF_PIN7) | \ - PIN_PUPDR_PULLUP(GPIOF_PIN8) | \ - PIN_PUPDR_PULLUP(GPIOF_PIN9) | \ - PIN_PUPDR_PULLUP(GPIOF_PIN10) | \ - PIN_PUPDR_PULLUP(GPIOF_PIN11) | \ - PIN_PUPDR_PULLUP(GPIOF_PIN12) | \ - PIN_PUPDR_PULLUP(GPIOF_PIN13) | \ - PIN_PUPDR_PULLUP(GPIOF_PIN14) | \ - PIN_PUPDR_PULLUP(GPIOF_PIN15)) -#define VAL_GPIOF_ODR (PIN_ODR_HIGH(GPIOF_PIN0) | \ - PIN_ODR_HIGH(GPIOF_PIN1) | \ - PIN_ODR_HIGH(GPIOF_PIN2) | \ - PIN_ODR_HIGH(GPIOF_PIN3) | \ - PIN_ODR_HIGH(GPIOF_PIN4) | \ - PIN_ODR_HIGH(GPIOF_PIN5) | \ - PIN_ODR_HIGH(GPIOF_PIN6) | \ - PIN_ODR_HIGH(GPIOF_PIN7) | \ - PIN_ODR_HIGH(GPIOF_PIN8) | \ - PIN_ODR_HIGH(GPIOF_PIN9) | \ - PIN_ODR_HIGH(GPIOF_PIN10) | \ - PIN_ODR_HIGH(GPIOF_PIN11) | \ - PIN_ODR_HIGH(GPIOF_PIN12) | \ - PIN_ODR_HIGH(GPIOF_PIN13) | \ - PIN_ODR_HIGH(GPIOF_PIN14) | \ - PIN_ODR_HIGH(GPIOF_PIN15)) -#define VAL_GPIOF_AFRL (PIN_AFIO_AF(GPIOF_PIN0, 0U) | \ - PIN_AFIO_AF(GPIOF_PIN1, 0U) | \ - PIN_AFIO_AF(GPIOF_PIN2, 0U) | \ - PIN_AFIO_AF(GPIOF_PIN3, 0U) | \ - PIN_AFIO_AF(GPIOF_PIN4, 0U) | \ - PIN_AFIO_AF(GPIOF_PIN5, 0U) | \ - PIN_AFIO_AF(GPIOF_PIN6, 0U) | \ - PIN_AFIO_AF(GPIOF_PIN7, 0U)) -#define VAL_GPIOF_AFRH (PIN_AFIO_AF(GPIOF_PIN8, 0U) | \ - PIN_AFIO_AF(GPIOF_PIN9, 0U) | \ - PIN_AFIO_AF(GPIOF_PIN10, 0U) | \ - PIN_AFIO_AF(GPIOF_PIN11, 0U) | \ - PIN_AFIO_AF(GPIOF_PIN12, 0U) | \ - PIN_AFIO_AF(GPIOF_PIN13, 0U) | \ - PIN_AFIO_AF(GPIOF_PIN14, 0U) | \ - PIN_AFIO_AF(GPIOF_PIN15, 0U)) - -#if !defined(_FROM_ASM_) -#ifdef __cplusplus -extern "C" { -#endif - void boardInit(void); -#ifdef __cplusplus -} -#endif -#endif /* _FROM_ASM_ */ - -#endif /* _BOARD_H */ diff --git a/keyboards/vinta/boards/GENERIC_STM32_F042X6/board.mk b/keyboards/vinta/boards/GENERIC_STM32_F042X6/board.mk deleted file mode 100644 index bbeb5bbff7..0000000000 --- a/keyboards/vinta/boards/GENERIC_STM32_F042X6/board.mk +++ /dev/null @@ -1,5 +0,0 @@ -# List of all the board related files. -BOARDSRC = $(BOARD_PATH)/boards/GENERIC_STM32_F042X6/board.c - -# Required include directories -BOARDINC = $(BOARD_PATH)/boards/GENERIC_STM32_F042X6 diff --git a/keyboards/vinta/bootloader_defs.h b/keyboards/vinta/bootloader_defs.h deleted file mode 100644 index 4994be9c24..0000000000 --- a/keyboards/vinta/bootloader_defs.h +++ /dev/null @@ -1,7 +0,0 @@ -/* Address for jumping to bootloader on STM32 chips. */ -/* It is chip dependent, the correct number can be looked up here: - * http://www.st.com/web/en/resource/technical/document/application_note/CD00167594.pdf - * This also requires a patch to chibios: - * <tmk_dir>/tmk_core/tool/chibios/ch-bootloader-jump.patch - */ -#define STM32_BOOTLOADER_ADDRESS 0x1FFFC400
\ No newline at end of file diff --git a/lib/python/qmk/cli/cformat.py b/lib/python/qmk/cli/cformat.py index 600161c5c5..6bcd15a110 100644 --- a/lib/python/qmk/cli/cformat.py +++ b/lib/python/qmk/cli/cformat.py @@ -43,8 +43,8 @@ def cformat(cli): # Empty array for files files = [] # Core directories for formatting - core_dirs = ['drivers', 'quantum', 'tests', 'tmk_core'] - ignores = ['tmk_core/protocol/usb_hid', 'quantum/template'] + core_dirs = ['drivers', 'quantum', 'tests', 'tmk_core', 'platforms'] + ignores = ['tmk_core/protocol/usb_hid', 'quantum/template', 'platforms/chibios'] # Find the list of files to format if cli.args.files: files.extend(normpath(file) for file in cli.args.files) diff --git a/platforms/chibios/BLACKPILL_STM32_F401/board/board.mk b/platforms/chibios/BLACKPILL_STM32_F401/board/board.mk new file mode 100644 index 0000000000..fddf7dace4 --- /dev/null +++ b/platforms/chibios/BLACKPILL_STM32_F401/board/board.mk @@ -0,0 +1,9 @@ +# List of all the board related files. +BOARDSRC = $(CHIBIOS)/os/hal/boards/ST_STM32F401C_DISCOVERY/board.c + +# Required include directories +BOARDINC = $(CHIBIOS)/os/hal/boards/ST_STM32F401C_DISCOVERY + +# Shared variables +ALLCSRC += $(BOARDSRC) +ALLINC += $(BOARDINC) diff --git a/platforms/chibios/BLACKPILL_STM32_F401/configs/board.h b/platforms/chibios/BLACKPILL_STM32_F401/configs/board.h new file mode 100644 index 0000000000..30af6b0c86 --- /dev/null +++ b/platforms/chibios/BLACKPILL_STM32_F401/configs/board.h @@ -0,0 +1,20 @@ +/* Copyright 2020 Nick Brassel (tzarc) + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <https://www.gnu.org/licenses/>. + */ +#pragma once + +#include_next "board.h" + +#undef STM32_HSE_BYPASS diff --git a/keyboards/handwired/onekey/blackpill_f401/chconf.h b/platforms/chibios/BLACKPILL_STM32_F401/configs/chconf.h index 7dc4f84a8a..7dc4f84a8a 100644 --- a/keyboards/handwired/onekey/blackpill_f401/chconf.h +++ b/platforms/chibios/BLACKPILL_STM32_F401/configs/chconf.h diff --git a/platforms/chibios/BLACKPILL_STM32_F401/configs/config.h b/platforms/chibios/BLACKPILL_STM32_F401/configs/config.h new file mode 100644 index 0000000000..eb73e72ef2 --- /dev/null +++ b/platforms/chibios/BLACKPILL_STM32_F401/configs/config.h @@ -0,0 +1,23 @@ +/* Copyright 2020 Nick Brassel (tzarc) + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <https://www.gnu.org/licenses/>. + */ +#pragma once + +#define BOARD_OTG_NOVBUSSENS 1 + +#define STM32_LSECLK 32768U +#define STM32_HSECLK 25000000U + +#define EARLY_INIT_PERFORM_BOOTLOADER_JUMP TRUE diff --git a/platforms/chibios/BLACKPILL_STM32_F401/configs/halconf.h b/platforms/chibios/BLACKPILL_STM32_F401/configs/halconf.h new file mode 100644 index 0000000000..a8db392aaa --- /dev/null +++ b/platforms/chibios/BLACKPILL_STM32_F401/configs/halconf.h @@ -0,0 +1,525 @@ +/* + ChibiOS - Copyright (C) 2006..2018 Giovanni Di Sirio + + Licensed under the Apache License, Version 2.0 (the "License"); + you may not use this file except in compliance with the License. + You may obtain a copy of the License at + + http://www.apache.org/licenses/LICENSE-2.0 + + Unless required by applicable law or agreed to in writing, software + distributed under the License is distributed on an "AS IS" BASIS, + WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + See the License for the specific language governing permissions and + limitations under the License. +*/ + +/** + * @file templates/halconf.h + * @brief HAL configuration header. + * @details HAL configuration file, this file allows to enable or disable the + * various device drivers from your application. You may also use + * this file in order to override the device drivers default settings. + * + * @addtogroup HAL_CONF + * @{ + */ + +#ifndef HALCONF_H +#define HALCONF_H + +#define _CHIBIOS_HAL_CONF_ +#define _CHIBIOS_HAL_CONF_VER_7_0_ + +#include "mcuconf.h" + +/** + * @brief Enables the PAL subsystem. + */ +#if !defined(HAL_USE_PAL) || defined(__DOXYGEN__) +#define HAL_USE_PAL TRUE +#endif + +/** + * @brief Enables the ADC subsystem. + */ +#if !defined(HAL_USE_ADC) || defined(__DOXYGEN__) +#define HAL_USE_ADC FALSE +#endif + +/** + * @brief Enables the CAN subsystem. + */ +#if !defined(HAL_USE_CAN) || defined(__DOXYGEN__) +#define HAL_USE_CAN FALSE +#endif + +/** + * @brief Enables the cryptographic subsystem. + */ +#if !defined(HAL_USE_CRY) || defined(__DOXYGEN__) +#define HAL_USE_CRY FALSE +#endif + +/** + * @brief Enables the DAC subsystem. + */ +#if !defined(HAL_USE_DAC) || defined(__DOXYGEN__) +#define HAL_USE_DAC FALSE +#endif + +/** + * @brief Enables the GPT subsystem. + */ +#if !defined(HAL_USE_GPT) || defined(__DOXYGEN__) +#define HAL_USE_GPT FALSE +#endif + +/** + * @brief Enables the I2C subsystem. + */ +#if !defined(HAL_USE_I2C) || defined(__DOXYGEN__) +#define HAL_USE_I2C FALSE +#endif + +/** + * @brief Enables the I2S subsystem. + */ +#if !defined(HAL_USE_I2S) || defined(__DOXYGEN__) +#define HAL_USE_I2S FALSE +#endif + +/** + * @brief Enables the ICU subsystem. + */ +#if !defined(HAL_USE_ICU) || defined(__DOXYGEN__) +#define HAL_USE_ICU FALSE +#endif + +/** + * @brief Enables the MAC subsystem. + */ +#if !defined(HAL_USE_MAC) || defined(__DOXYGEN__) +#define HAL_USE_MAC FALSE +#endif + +/** + * @brief Enables the MMC_SPI subsystem. + */ +#if !defined(HAL_USE_MMC_SPI) || defined(__DOXYGEN__) +#define HAL_USE_MMC_SPI FALSE +#endif + +/** + * @brief Enables the PWM subsystem. + */ +#if !defined(HAL_USE_PWM) || defined(__DOXYGEN__) +#define HAL_USE_PWM FALSE +#endif + +/** + * @brief Enables the RTC subsystem. + */ +#if !defined(HAL_USE_RTC) || defined(__DOXYGEN__) +#define HAL_USE_RTC FALSE +#endif + +/** + * @brief Enables the SDC subsystem. + */ +#if !defined(HAL_USE_SDC) || defined(__DOXYGEN__) +#define HAL_USE_SDC FALSE +#endif + +/** + * @brief Enables the SERIAL subsystem. + */ +#if !defined(HAL_USE_SERIAL) || defined(__DOXYGEN__) +#define HAL_USE_SERIAL FALSE +#endif + +/** + * @brief Enables the SERIAL over USB subsystem. + */ +#if !defined(HAL_USE_SERIAL_USB) || defined(__DOXYGEN__) +#define HAL_USE_SERIAL_USB FALSE +#endif + +/** + * @brief Enables the SIO subsystem. + */ +#if !defined(HAL_USE_SIO) || defined(__DOXYGEN__) +#define HAL_USE_SIO FALSE +#endif + +/** + * @brief Enables the SPI subsystem. + */ +#if !defined(HAL_USE_SPI) || defined(__DOXYGEN__) +#define HAL_USE_SPI FALSE +#endif + +/** + * @brief Enables the TRNG subsystem. + */ +#if !defined(HAL_USE_TRNG) || defined(__DOXYGEN__) +#define HAL_USE_TRNG FALSE +#endif + +/** + * @brief Enables the UART subsystem. + */ +#if !defined(HAL_USE_UART) || defined(__DOXYGEN__) +#define HAL_USE_UART FALSE +#endif + +/** + * @brief Enables the USB subsystem. + */ +#if !defined(HAL_USE_USB) || defined(__DOXYGEN__) +#define HAL_USE_USB TRUE +#endif + +/** + * @brief Enables the WDG subsystem. + */ +#if !defined(HAL_USE_WDG) || defined(__DOXYGEN__) +#define HAL_USE_WDG FALSE +#endif + +/** + * @brief Enables the WSPI subsystem. + */ +#if !defined(HAL_USE_WSPI) || defined(__DOXYGEN__) +#define HAL_USE_WSPI FALSE +#endif + +/*===========================================================================*/ +/* PAL driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables synchronous APIs. + * @note Disabling this option saves both code and data space. + */ +#if !defined(PAL_USE_CALLBACKS) || defined(__DOXYGEN__) +#define PAL_USE_CALLBACKS FALSE +#endif + +/** + * @brief Enables synchronous APIs. + * @note Disabling this option saves both code and data space. + */ +#if !defined(PAL_USE_WAIT) || defined(__DOXYGEN__) +#define PAL_USE_WAIT FALSE +#endif + +/*===========================================================================*/ +/* ADC driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables synchronous APIs. + * @note Disabling this option saves both code and data space. + */ +#if !defined(ADC_USE_WAIT) || defined(__DOXYGEN__) +#define ADC_USE_WAIT TRUE +#endif + +/** + * @brief Enables the @p adcAcquireBus() and @p adcReleaseBus() APIs. + * @note Disabling this option saves both code and data space. + */ +#if !defined(ADC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) +#define ADC_USE_MUTUAL_EXCLUSION TRUE +#endif + +/*===========================================================================*/ +/* CAN driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Sleep mode related APIs inclusion switch. + */ +#if !defined(CAN_USE_SLEEP_MODE) || defined(__DOXYGEN__) +#define CAN_USE_SLEEP_MODE TRUE +#endif + +/** + * @brief Enforces the driver to use direct callbacks rather than OSAL events. + */ +#if !defined(CAN_ENFORCE_USE_CALLBACKS) || defined(__DOXYGEN__) +#define CAN_ENFORCE_USE_CALLBACKS FALSE +#endif + +/*===========================================================================*/ +/* CRY driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables the SW fall-back of the cryptographic driver. + * @details When enabled, this option, activates a fall-back software + * implementation for algorithms not supported by the underlying + * hardware. + * @note Fall-back implementations may not be present for all algorithms. + */ +#if !defined(HAL_CRY_USE_FALLBACK) || defined(__DOXYGEN__) +#define HAL_CRY_USE_FALLBACK FALSE +#endif + +/** + * @brief Makes the driver forcibly use the fall-back implementations. + */ +#if !defined(HAL_CRY_ENFORCE_FALLBACK) || defined(__DOXYGEN__) +#define HAL_CRY_ENFORCE_FALLBACK FALSE +#endif + +/*===========================================================================*/ +/* DAC driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables synchronous APIs. + * @note Disabling this option saves both code and data space. + */ +#if !defined(DAC_USE_WAIT) || defined(__DOXYGEN__) +#define DAC_USE_WAIT TRUE +#endif + +/** + * @brief Enables the @p dacAcquireBus() and @p dacReleaseBus() APIs. + * @note Disabling this option saves both code and data space. + */ +#if !defined(DAC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) +#define DAC_USE_MUTUAL_EXCLUSION TRUE +#endif + +/*===========================================================================*/ +/* I2C driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables the mutual exclusion APIs on the I2C bus. + */ +#if !defined(I2C_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) +#define I2C_USE_MUTUAL_EXCLUSION TRUE +#endif + +/*===========================================================================*/ +/* MAC driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables the zero-copy API. + */ +#if !defined(MAC_USE_ZERO_COPY) || defined(__DOXYGEN__) +#define MAC_USE_ZERO_COPY FALSE +#endif + +/** + * @brief Enables an event sources for incoming packets. + */ +#if !defined(MAC_USE_EVENTS) || defined(__DOXYGEN__) +#define MAC_USE_EVENTS TRUE +#endif + +/*===========================================================================*/ +/* MMC_SPI driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Delays insertions. + * @details If enabled this options inserts delays into the MMC waiting + * routines releasing some extra CPU time for the threads with + * lower priority, this may slow down the driver a bit however. + * This option is recommended also if the SPI driver does not + * use a DMA channel and heavily loads the CPU. + */ +#if !defined(MMC_NICE_WAITING) || defined(__DOXYGEN__) +#define MMC_NICE_WAITING TRUE +#endif + +/*===========================================================================*/ +/* SDC driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Number of initialization attempts before rejecting the card. + * @note Attempts are performed at 10mS intervals. + */ +#if !defined(SDC_INIT_RETRY) || defined(__DOXYGEN__) +#define SDC_INIT_RETRY 100 +#endif + +/** + * @brief Include support for MMC cards. + * @note MMC support is not yet implemented so this option must be kept + * at @p FALSE. + */ +#if !defined(SDC_MMC_SUPPORT) || defined(__DOXYGEN__) +#define SDC_MMC_SUPPORT FALSE +#endif + +/** + * @brief Delays insertions. + * @details If enabled this options inserts delays into the MMC waiting + * routines releasing some extra CPU time for the threads with + * lower priority, this may slow down the driver a bit however. + */ +#if !defined(SDC_NICE_WAITING) || defined(__DOXYGEN__) +#define SDC_NICE_WAITING TRUE +#endif + +/** + * @brief OCR initialization constant for V20 cards. + */ +#if !defined(SDC_INIT_OCR_V20) || defined(__DOXYGEN__) +#define SDC_INIT_OCR_V20 0x50FF8000U +#endif + +/** + * @brief OCR initialization constant for non-V20 cards. + */ +#if !defined(SDC_INIT_OCR) || defined(__DOXYGEN__) +#define SDC_INIT_OCR 0x80100000U +#endif + +/*===========================================================================*/ +/* SERIAL driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Default bit rate. + * @details Configuration parameter, this is the baud rate selected for the + * default configuration. + */ +#if !defined(SERIAL_DEFAULT_BITRATE) || defined(__DOXYGEN__) +#define SERIAL_DEFAULT_BITRATE 38400 +#endif + +/** + * @brief Serial buffers size. + * @details Configuration parameter, you can change the depth of the queue + * buffers depending on the requirements of your application. + * @note The default is 16 bytes for both the transmission and receive + * buffers. + */ +#if !defined(SERIAL_BUFFERS_SIZE) || defined(__DOXYGEN__) +#define SERIAL_BUFFERS_SIZE 16 +#endif + +/*===========================================================================*/ +/* SERIAL_USB driver related setting. */ +/*===========================================================================*/ + +/** + * @brief Serial over USB buffers size. + * @details Configuration parameter, the buffer size must be a multiple of + * the USB data endpoint maximum packet size. + * @note The default is 256 bytes for both the transmission and receive + * buffers. + */ +#if !defined(SERIAL_USB_BUFFERS_SIZE) || defined(__DOXYGEN__) +#define SERIAL_USB_BUFFERS_SIZE 256 +#endif + +/** + * @brief Serial over USB number of buffers. + * @note The default is 2 buffers. + */ +#if !defined(SERIAL_USB_BUFFERS_NUMBER) || defined(__DOXYGEN__) +#define SERIAL_USB_BUFFERS_NUMBER 2 +#endif + +/*===========================================================================*/ +/* SPI driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables synchronous APIs. + * @note Disabling this option saves both code and data space. + */ +#if !defined(SPI_USE_WAIT) || defined(__DOXYGEN__) +#define SPI_USE_WAIT TRUE +#endif + +/** + * @brief Enables circular transfers APIs. + * @note Disabling this option saves both code and data space. + */ +#if !defined(SPI_USE_CIRCULAR) || defined(__DOXYGEN__) +#define SPI_USE_CIRCULAR FALSE +#endif + + +/** + * @brief Enables the @p spiAcquireBus() and @p spiReleaseBus() APIs. + * @note Disabling this option saves both code and data space. + */ +#if !defined(SPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) +#define SPI_USE_MUTUAL_EXCLUSION TRUE +#endif + +/** + * @brief Handling method for SPI CS line. + * @note Disabling this option saves both code and data space. + */ +#if !defined(SPI_SELECT_MODE) || defined(__DOXYGEN__) +#define SPI_SELECT_MODE SPI_SELECT_MODE_PAD +#endif + +/*===========================================================================*/ +/* UART driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables synchronous APIs. + * @note Disabling this option saves both code and data space. + */ +#if !defined(UART_USE_WAIT) || defined(__DOXYGEN__) +#define UART_USE_WAIT FALSE +#endif + +/** + * @brief Enables the @p uartAcquireBus() and @p uartReleaseBus() APIs. + * @note Disabling this option saves both code and data space. + */ +#if !defined(UART_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) +#define UART_USE_MUTUAL_EXCLUSION FALSE +#endif + +/*===========================================================================*/ +/* USB driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables synchronous APIs. + * @note Disabling this option saves both code and data space. + */ +#if !defined(USB_USE_WAIT) || defined(__DOXYGEN__) +#define USB_USE_WAIT TRUE +#endif + +/*===========================================================================*/ +/* WSPI driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables synchronous APIs. + * @note Disabling this option saves both code and data space. + */ +#if !defined(WSPI_USE_WAIT) || defined(__DOXYGEN__) +#define WSPI_USE_WAIT TRUE +#endif + +/** + * @brief Enables the @p wspiAcquireBus() and @p wspiReleaseBus() APIs. + * @note Disabling this option saves both code and data space. + */ +#if !defined(WSPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) +#define WSPI_USE_MUTUAL_EXCLUSION TRUE +#endif + +#endif /* HALCONF_H */ + +/** @} */ diff --git a/platforms/chibios/BLACKPILL_STM32_F401/configs/mcuconf.h b/platforms/chibios/BLACKPILL_STM32_F401/configs/mcuconf.h new file mode 100644 index 0000000000..ba6e934fe7 --- /dev/null +++ b/platforms/chibios/BLACKPILL_STM32_F401/configs/mcuconf.h @@ -0,0 +1,253 @@ +/* + ChibiOS - Copyright (C) 2006..2018 Giovanni Di Sirio + + Licensed under the Apache License, Version 2.0 (the "License"); + you may not use this file except in compliance with the License. + You may obtain a copy of the License at + + http://www.apache.org/licenses/LICENSE-2.0 + + Unless required by applicable law or agreed to in writing, software + distributed under the License is distributed on an "AS IS" BASIS, + WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + See the License for the specific language governing permissions and + limitations under the License. +*/ + +#ifndef MCUCONF_H +#define MCUCONF_H + +/* + * STM32F4xx drivers configuration. + * The following settings override the default settings present in + * the various device driver implementation headers. + * Note that the settings for each driver only have effect if the whole + * driver is enabled in halconf.h. + * + * IRQ priorities: + * 15...0 Lowest...Highest. + * + * DMA priorities: + * 0...3 Lowest...Highest. + */ + +#define STM32F4xx_MCUCONF + +/* + * HAL driver system settings. + */ +#define STM32_NO_INIT FALSE +#define STM32_HSI_ENABLED TRUE +#define STM32_LSI_ENABLED TRUE +#define STM32_HSE_ENABLED TRUE +#define STM32_LSE_ENABLED FALSE +#define STM32_CLOCK48_REQUIRED TRUE +#define STM32_SW STM32_SW_PLL +#define STM32_PLLSRC STM32_PLLSRC_HSE +#define STM32_PLLM_VALUE 25 +#define STM32_PLLN_VALUE 336 +#define STM32_PLLP_VALUE 4 +#define STM32_PLLQ_VALUE 7 +#define STM32_HPRE STM32_HPRE_DIV1 +#define STM32_PPRE1 STM32_PPRE1_DIV4 +#define STM32_PPRE2 STM32_PPRE2_DIV2 +#define STM32_RTCSEL STM32_RTCSEL_LSI +#define STM32_RTCPRE_VALUE 8 +#define STM32_MCO1SEL STM32_MCO1SEL_HSI +#define STM32_MCO1PRE STM32_MCO1PRE_DIV1 +#define STM32_MCO2SEL STM32_MCO2SEL_SYSCLK +#define STM32_MCO2PRE STM32_MCO2PRE_DIV5 +#define STM32_I2SSRC STM32_I2SSRC_CKIN +#define STM32_PLLI2SN_VALUE 192 +#define STM32_PLLI2SR_VALUE 5 +#define STM32_PVD_ENABLE FALSE +#define STM32_PLS STM32_PLS_LEV0 +#define STM32_BKPRAM_ENABLE FALSE + +/* + * IRQ system settings. + */ +#define STM32_IRQ_EXTI0_PRIORITY 6 +#define STM32_IRQ_EXTI1_PRIORITY 6 +#define STM32_IRQ_EXTI2_PRIORITY 6 +#define STM32_IRQ_EXTI3_PRIORITY 6 +#define STM32_IRQ_EXTI4_PRIORITY 6 +#define STM32_IRQ_EXTI5_9_PRIORITY 6 +#define STM32_IRQ_EXTI10_15_PRIORITY 6 +#define STM32_IRQ_EXTI16_PRIORITY 6 +#define STM32_IRQ_EXTI17_PRIORITY 15 +#define STM32_IRQ_EXTI18_PRIORITY 6 +#define STM32_IRQ_EXTI19_PRIORITY 6 +#define STM32_IRQ_EXTI20_PRIORITY 6 +#define STM32_IRQ_EXTI21_PRIORITY 15 +#define STM32_IRQ_EXTI22_PRIORITY 15 + +/* + * ADC driver system settings. + */ +#define STM32_ADC_ADCPRE ADC_CCR_ADCPRE_DIV4 +#define STM32_ADC_USE_ADC1 FALSE +#define STM32_ADC_ADC1_DMA_STREAM STM32_DMA_STREAM_ID(2, 4) +#define STM32_ADC_ADC1_DMA_PRIORITY 2 +#define STM32_ADC_IRQ_PRIORITY 6 +#define STM32_ADC_ADC1_DMA_IRQ_PRIORITY 6 + +/* + * GPT driver system settings. + */ +#define STM32_GPT_USE_TIM1 FALSE +#define STM32_GPT_USE_TIM2 FALSE +#define STM32_GPT_USE_TIM3 FALSE +#define STM32_GPT_USE_TIM4 FALSE +#define STM32_GPT_USE_TIM5 FALSE +#define STM32_GPT_USE_TIM9 FALSE +#define STM32_GPT_USE_TIM11 FALSE +#define STM32_GPT_TIM1_IRQ_PRIORITY 7 +#define STM32_GPT_TIM2_IRQ_PRIORITY 7 +#define STM32_GPT_TIM3_IRQ_PRIORITY 7 +#define STM32_GPT_TIM4_IRQ_PRIORITY 7 +#define STM32_GPT_TIM5_IRQ_PRIORITY 7 +#define STM32_GPT_TIM9_IRQ_PRIORITY 7 +#define STM32_GPT_TIM11_IRQ_PRIORITY 7 + +/* + * I2C driver system settings. + */ +#define STM32_I2C_USE_I2C1 FALSE +#define STM32_I2C_USE_I2C2 FALSE +#define STM32_I2C_USE_I2C3 FALSE +#define STM32_I2C_BUSY_TIMEOUT 50 +#define STM32_I2C_I2C1_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 0) +#define STM32_I2C_I2C1_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 6) +#define STM32_I2C_I2C2_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 2) +#define STM32_I2C_I2C2_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 7) +#define STM32_I2C_I2C3_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 2) +#define STM32_I2C_I2C3_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 4) +#define STM32_I2C_I2C1_IRQ_PRIORITY 5 +#define STM32_I2C_I2C2_IRQ_PRIORITY 5 +#define STM32_I2C_I2C3_IRQ_PRIORITY 5 +#define STM32_I2C_I2C1_DMA_PRIORITY 3 +#define STM32_I2C_I2C2_DMA_PRIORITY 3 +#define STM32_I2C_I2C3_DMA_PRIORITY 3 +#define STM32_I2C_DMA_ERROR_HOOK(i2cp) osalSysHalt("DMA failure") + +/* + * I2S driver system settings. + */ +#define STM32_I2S_USE_SPI2 FALSE +#define STM32_I2S_USE_SPI3 FALSE +#define STM32_I2S_SPI2_IRQ_PRIORITY 10 +#define STM32_I2S_SPI3_IRQ_PRIORITY 10 +#define STM32_I2S_SPI2_DMA_PRIORITY 1 +#define STM32_I2S_SPI3_DMA_PRIORITY 1 +#define STM32_I2S_SPI2_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 3) +#define STM32_I2S_SPI2_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 4) +#define STM32_I2S_SPI3_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 0) +#define STM32_I2S_SPI3_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 7) +#define STM32_I2S_DMA_ERROR_HOOK(i2sp) osalSysHalt("DMA failure") + +/* + * ICU driver system settings. + */ +#define STM32_ICU_USE_TIM1 FALSE +#define STM32_ICU_USE_TIM2 FALSE +#define STM32_ICU_USE_TIM3 FALSE +#define STM32_ICU_USE_TIM4 FALSE +#define STM32_ICU_USE_TIM5 FALSE +#define STM32_ICU_USE_TIM9 FALSE +#define STM32_ICU_TIM1_IRQ_PRIORITY 7 +#define STM32_ICU_TIM2_IRQ_PRIORITY 7 +#define STM32_ICU_TIM3_IRQ_PRIORITY 7 +#define STM32_ICU_TIM4_IRQ_PRIORITY 7 +#define STM32_ICU_TIM5_IRQ_PRIORITY 7 +#define STM32_ICU_TIM9_IRQ_PRIORITY 7 + +/* + * PWM driver system settings. + */ +#define STM32_PWM_USE_ADVANCED FALSE +#define STM32_PWM_USE_TIM1 FALSE +#define STM32_PWM_USE_TIM2 FALSE +#define STM32_PWM_USE_TIM3 FALSE +#define STM32_PWM_USE_TIM4 FALSE +#define STM32_PWM_USE_TIM5 FALSE +#define STM32_PWM_USE_TIM9 FALSE +#define STM32_PWM_TIM1_IRQ_PRIORITY 7 +#define STM32_PWM_TIM2_IRQ_PRIORITY 7 +#define STM32_PWM_TIM3_IRQ_PRIORITY 7 +#define STM32_PWM_TIM4_IRQ_PRIORITY 7 +#define STM32_PWM_TIM5_IRQ_PRIORITY 7 +#define STM32_PWM_TIM9_IRQ_PRIORITY 7 + +/* + * SERIAL driver system settings. + */ +#define STM32_SERIAL_USE_USART1 FALSE +#define STM32_SERIAL_USE_USART2 FALSE +#define STM32_SERIAL_USE_USART6 FALSE +#define STM32_SERIAL_USART1_PRIORITY 12 +#define STM32_SERIAL_USART2_PRIORITY 12 +#define STM32_SERIAL_USART6_PRIORITY 12 + +/* + * SPI driver system settings. + */ +#define STM32_SPI_USE_SPI1 FALSE +#define STM32_SPI_USE_SPI2 FALSE +#define STM32_SPI_USE_SPI3 FALSE +#define STM32_SPI_SPI1_RX_DMA_STREAM STM32_DMA_STREAM_ID(2, 0) +#define STM32_SPI_SPI1_TX_DMA_STREAM STM32_DMA_STREAM_ID(2, 3) +#define STM32_SPI_SPI2_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 3) +#define STM32_SPI_SPI2_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 4) +#define STM32_SPI_SPI3_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 0) +#define STM32_SPI_SPI3_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 7) +#define STM32_SPI_SPI1_DMA_PRIORITY 1 +#define STM32_SPI_SPI2_DMA_PRIORITY 1 +#define STM32_SPI_SPI3_DMA_PRIORITY 1 +#define STM32_SPI_SPI1_IRQ_PRIORITY 10 +#define STM32_SPI_SPI2_IRQ_PRIORITY 10 +#define STM32_SPI_SPI3_IRQ_PRIORITY 10 +#define STM32_SPI_DMA_ERROR_HOOK(spip) osalSysHalt("DMA failure") + +/* + * ST driver system settings. + */ +#define STM32_ST_IRQ_PRIORITY 8 +#define STM32_ST_USE_TIMER 2 + +/* + * UART driver system settings. + */ +#define STM32_UART_USE_USART1 FALSE +#define STM32_UART_USE_USART2 FALSE +#define STM32_UART_USE_USART6 FALSE +#define STM32_UART_USART1_RX_DMA_STREAM STM32_DMA_STREAM_ID(2, 5) +#define STM32_UART_USART1_TX_DMA_STREAM STM32_DMA_STREAM_ID(2, 7) +#define STM32_UART_USART2_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 5) +#define STM32_UART_USART2_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 6) +#define STM32_UART_USART6_RX_DMA_STREAM STM32_DMA_STREAM_ID(2, 2) +#define STM32_UART_USART6_TX_DMA_STREAM STM32_DMA_STREAM_ID(2, 7) +#define STM32_UART_USART1_IRQ_PRIORITY 12 +#define STM32_UART_USART2_IRQ_PRIORITY 12 +#define STM32_UART_USART6_IRQ_PRIORITY 12 +#define STM32_UART_USART1_DMA_PRIORITY 0 +#define STM32_UART_USART2_DMA_PRIORITY 0 +#define STM32_UART_USART6_DMA_PRIORITY 0 +#define STM32_UART_DMA_ERROR_HOOK(uartp) osalSysHalt("DMA failure") + +/* + * USB driver system settings. + */ +#define STM32_USB_USE_OTG1 TRUE +#define STM32_USB_OTG1_IRQ_PRIORITY 14 +#define STM32_USB_OTG1_RX_FIFO_SIZE 512 +#define STM32_USB_OTG_THREAD_PRIO NORMALPRIO+1 +#define STM32_USB_OTG_THREAD_STACK_SIZE 128 +#define STM32_USB_OTGFIFO_FILL_BASEPRI 0 + +/* + * WDG driver system settings. + */ +#define STM32_WDG_USE_IWDG FALSE + +#endif /* MCUCONF_H */ diff --git a/platforms/chibios/BLACKPILL_STM32_F411/board/board.mk b/platforms/chibios/BLACKPILL_STM32_F411/board/board.mk new file mode 100644 index 0000000000..bb00b1a2b0 --- /dev/null +++ b/platforms/chibios/BLACKPILL_STM32_F411/board/board.mk @@ -0,0 +1,9 @@ +# List of all the board related files. +BOARDSRC = $(CHIBIOS)/os/hal/boards/ST_NUCLEO64_F411RE/board.c + +# Required include directories +BOARDINC = $(CHIBIOS)/os/hal/boards/ST_NUCLEO64_F411RE + +# Shared variables +ALLCSRC += $(BOARDSRC) +ALLINC += $(BOARDINC) diff --git a/platforms/chibios/BLACKPILL_STM32_F411/configs/board.h b/platforms/chibios/BLACKPILL_STM32_F411/configs/board.h new file mode 100644 index 0000000000..30af6b0c86 --- /dev/null +++ b/platforms/chibios/BLACKPILL_STM32_F411/configs/board.h @@ -0,0 +1,20 @@ +/* Copyright 2020 Nick Brassel (tzarc) + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <https://www.gnu.org/licenses/>. + */ +#pragma once + +#include_next "board.h" + +#undef STM32_HSE_BYPASS diff --git a/keyboards/handwired/onekey/blackpill_f411/chconf.h b/platforms/chibios/BLACKPILL_STM32_F411/configs/chconf.h index 7dc4f84a8a..7dc4f84a8a 100644 --- a/keyboards/handwired/onekey/blackpill_f411/chconf.h +++ b/platforms/chibios/BLACKPILL_STM32_F411/configs/chconf.h diff --git a/platforms/chibios/BLACKPILL_STM32_F411/configs/config.h b/platforms/chibios/BLACKPILL_STM32_F411/configs/config.h new file mode 100644 index 0000000000..eb73e72ef2 --- /dev/null +++ b/platforms/chibios/BLACKPILL_STM32_F411/configs/config.h @@ -0,0 +1,23 @@ +/* Copyright 2020 Nick Brassel (tzarc) + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <https://www.gnu.org/licenses/>. + */ +#pragma once + +#define BOARD_OTG_NOVBUSSENS 1 + +#define STM32_LSECLK 32768U +#define STM32_HSECLK 25000000U + +#define EARLY_INIT_PERFORM_BOOTLOADER_JUMP TRUE diff --git a/platforms/chibios/BLACKPILL_STM32_F411/configs/halconf.h b/platforms/chibios/BLACKPILL_STM32_F411/configs/halconf.h new file mode 100644 index 0000000000..a8db392aaa --- /dev/null +++ b/platforms/chibios/BLACKPILL_STM32_F411/configs/halconf.h @@ -0,0 +1,525 @@ +/* + ChibiOS - Copyright (C) 2006..2018 Giovanni Di Sirio + + Licensed under the Apache License, Version 2.0 (the "License"); + you may not use this file except in compliance with the License. + You may obtain a copy of the License at + + http://www.apache.org/licenses/LICENSE-2.0 + + Unless required by applicable law or agreed to in writing, software + distributed under the License is distributed on an "AS IS" BASIS, + WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + See the License for the specific language governing permissions and + limitations under the License. +*/ + +/** + * @file templates/halconf.h + * @brief HAL configuration header. + * @details HAL configuration file, this file allows to enable or disable the + * various device drivers from your application. You may also use + * this file in order to override the device drivers default settings. + * + * @addtogroup HAL_CONF + * @{ + */ + +#ifndef HALCONF_H +#define HALCONF_H + +#define _CHIBIOS_HAL_CONF_ +#define _CHIBIOS_HAL_CONF_VER_7_0_ + +#include "mcuconf.h" + +/** + * @brief Enables the PAL subsystem. + */ +#if !defined(HAL_USE_PAL) || defined(__DOXYGEN__) +#define HAL_USE_PAL TRUE +#endif + +/** + * @brief Enables the ADC subsystem. + */ +#if !defined(HAL_USE_ADC) || defined(__DOXYGEN__) +#define HAL_USE_ADC FALSE +#endif + +/** + * @brief Enables the CAN subsystem. + */ +#if !defined(HAL_USE_CAN) || defined(__DOXYGEN__) +#define HAL_USE_CAN FALSE +#endif + +/** + * @brief Enables the cryptographic subsystem. + */ +#if !defined(HAL_USE_CRY) || defined(__DOXYGEN__) +#define HAL_USE_CRY FALSE +#endif + +/** + * @brief Enables the DAC subsystem. + */ +#if !defined(HAL_USE_DAC) || defined(__DOXYGEN__) +#define HAL_USE_DAC FALSE +#endif + +/** + * @brief Enables the GPT subsystem. + */ +#if !defined(HAL_USE_GPT) || defined(__DOXYGEN__) +#define HAL_USE_GPT FALSE +#endif + +/** + * @brief Enables the I2C subsystem. + */ +#if !defined(HAL_USE_I2C) || defined(__DOXYGEN__) +#define HAL_USE_I2C FALSE +#endif + +/** + * @brief Enables the I2S subsystem. + */ +#if !defined(HAL_USE_I2S) || defined(__DOXYGEN__) +#define HAL_USE_I2S FALSE +#endif + +/** + * @brief Enables the ICU subsystem. + */ +#if !defined(HAL_USE_ICU) || defined(__DOXYGEN__) +#define HAL_USE_ICU FALSE +#endif + +/** + * @brief Enables the MAC subsystem. + */ +#if !defined(HAL_USE_MAC) || defined(__DOXYGEN__) +#define HAL_USE_MAC FALSE +#endif + +/** + * @brief Enables the MMC_SPI subsystem. + */ +#if !defined(HAL_USE_MMC_SPI) || defined(__DOXYGEN__) +#define HAL_USE_MMC_SPI FALSE +#endif + +/** + * @brief Enables the PWM subsystem. + */ +#if !defined(HAL_USE_PWM) || defined(__DOXYGEN__) +#define HAL_USE_PWM FALSE +#endif + +/** + * @brief Enables the RTC subsystem. + */ +#if !defined(HAL_USE_RTC) || defined(__DOXYGEN__) +#define HAL_USE_RTC FALSE +#endif + +/** + * @brief Enables the SDC subsystem. + */ +#if !defined(HAL_USE_SDC) || defined(__DOXYGEN__) +#define HAL_USE_SDC FALSE +#endif + +/** + * @brief Enables the SERIAL subsystem. + */ +#if !defined(HAL_USE_SERIAL) || defined(__DOXYGEN__) +#define HAL_USE_SERIAL FALSE +#endif + +/** + * @brief Enables the SERIAL over USB subsystem. + */ +#if !defined(HAL_USE_SERIAL_USB) || defined(__DOXYGEN__) +#define HAL_USE_SERIAL_USB FALSE +#endif + +/** + * @brief Enables the SIO subsystem. + */ +#if !defined(HAL_USE_SIO) || defined(__DOXYGEN__) +#define HAL_USE_SIO FALSE +#endif + +/** + * @brief Enables the SPI subsystem. + */ +#if !defined(HAL_USE_SPI) || defined(__DOXYGEN__) +#define HAL_USE_SPI FALSE +#endif + +/** + * @brief Enables the TRNG subsystem. + */ +#if !defined(HAL_USE_TRNG) || defined(__DOXYGEN__) +#define HAL_USE_TRNG FALSE +#endif + +/** + * @brief Enables the UART subsystem. + */ +#if !defined(HAL_USE_UART) || defined(__DOXYGEN__) +#define HAL_USE_UART FALSE +#endif + +/** + * @brief Enables the USB subsystem. + */ +#if !defined(HAL_USE_USB) || defined(__DOXYGEN__) +#define HAL_USE_USB TRUE +#endif + +/** + * @brief Enables the WDG subsystem. + */ +#if !defined(HAL_USE_WDG) || defined(__DOXYGEN__) +#define HAL_USE_WDG FALSE +#endif + +/** + * @brief Enables the WSPI subsystem. + */ +#if !defined(HAL_USE_WSPI) || defined(__DOXYGEN__) +#define HAL_USE_WSPI FALSE +#endif + +/*===========================================================================*/ +/* PAL driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables synchronous APIs. + * @note Disabling this option saves both code and data space. + */ +#if !defined(PAL_USE_CALLBACKS) || defined(__DOXYGEN__) +#define PAL_USE_CALLBACKS FALSE +#endif + +/** + * @brief Enables synchronous APIs. + * @note Disabling this option saves both code and data space. + */ +#if !defined(PAL_USE_WAIT) || defined(__DOXYGEN__) +#define PAL_USE_WAIT FALSE +#endif + +/*===========================================================================*/ +/* ADC driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables synchronous APIs. + * @note Disabling this option saves both code and data space. + */ +#if !defined(ADC_USE_WAIT) || defined(__DOXYGEN__) +#define ADC_USE_WAIT TRUE +#endif + +/** + * @brief Enables the @p adcAcquireBus() and @p adcReleaseBus() APIs. + * @note Disabling this option saves both code and data space. + */ +#if !defined(ADC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) +#define ADC_USE_MUTUAL_EXCLUSION TRUE +#endif + +/*===========================================================================*/ +/* CAN driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Sleep mode related APIs inclusion switch. + */ +#if !defined(CAN_USE_SLEEP_MODE) || defined(__DOXYGEN__) +#define CAN_USE_SLEEP_MODE TRUE +#endif + +/** + * @brief Enforces the driver to use direct callbacks rather than OSAL events. + */ +#if !defined(CAN_ENFORCE_USE_CALLBACKS) || defined(__DOXYGEN__) +#define CAN_ENFORCE_USE_CALLBACKS FALSE +#endif + +/*===========================================================================*/ +/* CRY driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables the SW fall-back of the cryptographic driver. + * @details When enabled, this option, activates a fall-back software + * implementation for algorithms not supported by the underlying + * hardware. + * @note Fall-back implementations may not be present for all algorithms. + */ +#if !defined(HAL_CRY_USE_FALLBACK) || defined(__DOXYGEN__) +#define HAL_CRY_USE_FALLBACK FALSE +#endif + +/** + * @brief Makes the driver forcibly use the fall-back implementations. + */ +#if !defined(HAL_CRY_ENFORCE_FALLBACK) || defined(__DOXYGEN__) +#define HAL_CRY_ENFORCE_FALLBACK FALSE +#endif + +/*===========================================================================*/ +/* DAC driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables synchronous APIs. + * @note Disabling this option saves both code and data space. + */ +#if !defined(DAC_USE_WAIT) || defined(__DOXYGEN__) +#define DAC_USE_WAIT TRUE +#endif + +/** + * @brief Enables the @p dacAcquireBus() and @p dacReleaseBus() APIs. + * @note Disabling this option saves both code and data space. + */ +#if !defined(DAC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) +#define DAC_USE_MUTUAL_EXCLUSION TRUE +#endif + +/*===========================================================================*/ +/* I2C driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables the mutual exclusion APIs on the I2C bus. + */ +#if !defined(I2C_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) +#define I2C_USE_MUTUAL_EXCLUSION TRUE +#endif + +/*===========================================================================*/ +/* MAC driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables the zero-copy API. + */ +#if !defined(MAC_USE_ZERO_COPY) || defined(__DOXYGEN__) +#define MAC_USE_ZERO_COPY FALSE +#endif + +/** + * @brief Enables an event sources for incoming packets. + */ +#if !defined(MAC_USE_EVENTS) || defined(__DOXYGEN__) +#define MAC_USE_EVENTS TRUE +#endif + +/*===========================================================================*/ +/* MMC_SPI driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Delays insertions. + * @details If enabled this options inserts delays into the MMC waiting + * routines releasing some extra CPU time for the threads with + * lower priority, this may slow down the driver a bit however. + * This option is recommended also if the SPI driver does not + * use a DMA channel and heavily loads the CPU. + */ +#if !defined(MMC_NICE_WAITING) || defined(__DOXYGEN__) +#define MMC_NICE_WAITING TRUE +#endif + +/*===========================================================================*/ +/* SDC driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Number of initialization attempts before rejecting the card. + * @note Attempts are performed at 10mS intervals. + */ +#if !defined(SDC_INIT_RETRY) || defined(__DOXYGEN__) +#define SDC_INIT_RETRY 100 +#endif + +/** + * @brief Include support for MMC cards. + * @note MMC support is not yet implemented so this option must be kept + * at @p FALSE. + */ +#if !defined(SDC_MMC_SUPPORT) || defined(__DOXYGEN__) +#define SDC_MMC_SUPPORT FALSE +#endif + +/** + * @brief Delays insertions. + * @details If enabled this options inserts delays into the MMC waiting + * routines releasing some extra CPU time for the threads with + * lower priority, this may slow down the driver a bit however. + */ +#if !defined(SDC_NICE_WAITING) || defined(__DOXYGEN__) +#define SDC_NICE_WAITING TRUE +#endif + +/** + * @brief OCR initialization constant for V20 cards. + */ +#if !defined(SDC_INIT_OCR_V20) || defined(__DOXYGEN__) +#define SDC_INIT_OCR_V20 0x50FF8000U +#endif + +/** + * @brief OCR initialization constant for non-V20 cards. + */ +#if !defined(SDC_INIT_OCR) || defined(__DOXYGEN__) +#define SDC_INIT_OCR 0x80100000U +#endif + +/*===========================================================================*/ +/* SERIAL driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Default bit rate. + * @details Configuration parameter, this is the baud rate selected for the + * default configuration. + */ +#if !defined(SERIAL_DEFAULT_BITRATE) || defined(__DOXYGEN__) +#define SERIAL_DEFAULT_BITRATE 38400 +#endif + +/** + * @brief Serial buffers size. + * @details Configuration parameter, you can change the depth of the queue + * buffers depending on the requirements of your application. + * @note The default is 16 bytes for both the transmission and receive + * buffers. + */ +#if !defined(SERIAL_BUFFERS_SIZE) || defined(__DOXYGEN__) +#define SERIAL_BUFFERS_SIZE 16 +#endif + +/*===========================================================================*/ +/* SERIAL_USB driver related setting. */ +/*===========================================================================*/ + +/** + * @brief Serial over USB buffers size. + * @details Configuration parameter, the buffer size must be a multiple of + * the USB data endpoint maximum packet size. + * @note The default is 256 bytes for both the transmission and receive + * buffers. + */ +#if !defined(SERIAL_USB_BUFFERS_SIZE) || defined(__DOXYGEN__) +#define SERIAL_USB_BUFFERS_SIZE 256 +#endif + +/** + * @brief Serial over USB number of buffers. + * @note The default is 2 buffers. + */ +#if !defined(SERIAL_USB_BUFFERS_NUMBER) || defined(__DOXYGEN__) +#define SERIAL_USB_BUFFERS_NUMBER 2 +#endif + +/*===========================================================================*/ +/* SPI driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables synchronous APIs. + * @note Disabling this option saves both code and data space. + */ +#if !defined(SPI_USE_WAIT) || defined(__DOXYGEN__) +#define SPI_USE_WAIT TRUE +#endif + +/** + * @brief Enables circular transfers APIs. + * @note Disabling this option saves both code and data space. + */ +#if !defined(SPI_USE_CIRCULAR) || defined(__DOXYGEN__) +#define SPI_USE_CIRCULAR FALSE +#endif + + +/** + * @brief Enables the @p spiAcquireBus() and @p spiReleaseBus() APIs. + * @note Disabling this option saves both code and data space. + */ +#if !defined(SPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) +#define SPI_USE_MUTUAL_EXCLUSION TRUE +#endif + +/** + * @brief Handling method for SPI CS line. + * @note Disabling this option saves both code and data space. + */ +#if !defined(SPI_SELECT_MODE) || defined(__DOXYGEN__) +#define SPI_SELECT_MODE SPI_SELECT_MODE_PAD +#endif + +/*===========================================================================*/ +/* UART driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables synchronous APIs. + * @note Disabling this option saves both code and data space. + */ +#if !defined(UART_USE_WAIT) || defined(__DOXYGEN__) +#define UART_USE_WAIT FALSE +#endif + +/** + * @brief Enables the @p uartAcquireBus() and @p uartReleaseBus() APIs. + * @note Disabling this option saves both code and data space. + */ +#if !defined(UART_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) +#define UART_USE_MUTUAL_EXCLUSION FALSE +#endif + +/*===========================================================================*/ +/* USB driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables synchronous APIs. + * @note Disabling this option saves both code and data space. + */ +#if !defined(USB_USE_WAIT) || defined(__DOXYGEN__) +#define USB_USE_WAIT TRUE +#endif + +/*===========================================================================*/ +/* WSPI driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables synchronous APIs. + * @note Disabling this option saves both code and data space. + */ +#if !defined(WSPI_USE_WAIT) || defined(__DOXYGEN__) +#define WSPI_USE_WAIT TRUE +#endif + +/** + * @brief Enables the @p wspiAcquireBus() and @p wspiReleaseBus() APIs. + * @note Disabling this option saves both code and data space. + */ +#if !defined(WSPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) +#define WSPI_USE_MUTUAL_EXCLUSION TRUE +#endif + +#endif /* HALCONF_H */ + +/** @} */ diff --git a/platforms/chibios/BLACKPILL_STM32_F411/configs/mcuconf.h b/platforms/chibios/BLACKPILL_STM32_F411/configs/mcuconf.h new file mode 100644 index 0000000000..0394ff56bb --- /dev/null +++ b/platforms/chibios/BLACKPILL_STM32_F411/configs/mcuconf.h @@ -0,0 +1,253 @@ +/* + ChibiOS - Copyright (C) 2006..2018 Giovanni Di Sirio + + Licensed under the Apache License, Version 2.0 (the "License"); + you may not use this file except in compliance with the License. + You may obtain a copy of the License at + + http://www.apache.org/licenses/LICENSE-2.0 + + Unless required by applicable law or agreed to in writing, software + distributed under the License is distributed on an "AS IS" BASIS, + WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + See the License for the specific language governing permissions and + limitations under the License. +*/ + +#ifndef MCUCONF_H +#define MCUCONF_H + +/* + * STM32F4xx drivers configuration. + * The following settings override the default settings present in + * the various device driver implementation headers. + * Note that the settings for each driver only have effect if the whole + * driver is enabled in halconf.h. + * + * IRQ priorities: + * 15...0 Lowest...Highest. + * + * DMA priorities: + * 0...3 Lowest...Highest. + */ + +#define STM32F4xx_MCUCONF + +/* + * HAL driver system settings. + */ +#define STM32_NO_INIT FALSE +#define STM32_HSI_ENABLED TRUE +#define STM32_LSI_ENABLED TRUE +#define STM32_HSE_ENABLED TRUE +#define STM32_LSE_ENABLED FALSE +#define STM32_CLOCK48_REQUIRED TRUE +#define STM32_SW STM32_SW_PLL +#define STM32_PLLSRC STM32_PLLSRC_HSE +#define STM32_PLLM_VALUE 25 +#define STM32_PLLN_VALUE 384 +#define STM32_PLLP_VALUE 4 +#define STM32_PLLQ_VALUE 8 +#define STM32_HPRE STM32_HPRE_DIV1 +#define STM32_PPRE1 STM32_PPRE1_DIV4 +#define STM32_PPRE2 STM32_PPRE2_DIV2 +#define STM32_RTCSEL STM32_RTCSEL_LSI +#define STM32_RTCPRE_VALUE 8 +#define STM32_MCO1SEL STM32_MCO1SEL_HSI +#define STM32_MCO1PRE STM32_MCO1PRE_DIV1 +#define STM32_MCO2SEL STM32_MCO2SEL_SYSCLK +#define STM32_MCO2PRE STM32_MCO2PRE_DIV5 +#define STM32_I2SSRC STM32_I2SSRC_CKIN +#define STM32_PLLI2SN_VALUE 192 +#define STM32_PLLI2SR_VALUE 5 +#define STM32_PVD_ENABLE FALSE +#define STM32_PLS STM32_PLS_LEV0 +#define STM32_BKPRAM_ENABLE FALSE + +/* + * IRQ system settings. + */ +#define STM32_IRQ_EXTI0_PRIORITY 6 +#define STM32_IRQ_EXTI1_PRIORITY 6 +#define STM32_IRQ_EXTI2_PRIORITY 6 +#define STM32_IRQ_EXTI3_PRIORITY 6 +#define STM32_IRQ_EXTI4_PRIORITY 6 +#define STM32_IRQ_EXTI5_9_PRIORITY 6 +#define STM32_IRQ_EXTI10_15_PRIORITY 6 +#define STM32_IRQ_EXTI16_PRIORITY 6 +#define STM32_IRQ_EXTI17_PRIORITY 15 +#define STM32_IRQ_EXTI18_PRIORITY 6 +#define STM32_IRQ_EXTI19_PRIORITY 6 +#define STM32_IRQ_EXTI20_PRIORITY 6 +#define STM32_IRQ_EXTI21_PRIORITY 15 +#define STM32_IRQ_EXTI22_PRIORITY 15 + +/* + * ADC driver system settings. + */ +#define STM32_ADC_ADCPRE ADC_CCR_ADCPRE_DIV4 +#define STM32_ADC_USE_ADC1 FALSE +#define STM32_ADC_ADC1_DMA_STREAM STM32_DMA_STREAM_ID(2, 4) +#define STM32_ADC_ADC1_DMA_PRIORITY 2 +#define STM32_ADC_IRQ_PRIORITY 6 +#define STM32_ADC_ADC1_DMA_IRQ_PRIORITY 6 + +/* + * GPT driver system settings. + */ +#define STM32_GPT_USE_TIM1 FALSE +#define STM32_GPT_USE_TIM2 FALSE +#define STM32_GPT_USE_TIM3 FALSE +#define STM32_GPT_USE_TIM4 FALSE +#define STM32_GPT_USE_TIM5 FALSE +#define STM32_GPT_USE_TIM9 FALSE +#define STM32_GPT_USE_TIM11 FALSE +#define STM32_GPT_TIM1_IRQ_PRIORITY 7 +#define STM32_GPT_TIM2_IRQ_PRIORITY 7 +#define STM32_GPT_TIM3_IRQ_PRIORITY 7 +#define STM32_GPT_TIM4_IRQ_PRIORITY 7 +#define STM32_GPT_TIM5_IRQ_PRIORITY 7 +#define STM32_GPT_TIM9_IRQ_PRIORITY 7 +#define STM32_GPT_TIM11_IRQ_PRIORITY 7 + +/* + * I2C driver system settings. + */ +#define STM32_I2C_USE_I2C1 FALSE +#define STM32_I2C_USE_I2C2 FALSE +#define STM32_I2C_USE_I2C3 FALSE +#define STM32_I2C_BUSY_TIMEOUT 50 +#define STM32_I2C_I2C1_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 0) +#define STM32_I2C_I2C1_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 6) +#define STM32_I2C_I2C2_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 2) +#define STM32_I2C_I2C2_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 7) +#define STM32_I2C_I2C3_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 2) +#define STM32_I2C_I2C3_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 4) +#define STM32_I2C_I2C1_IRQ_PRIORITY 5 +#define STM32_I2C_I2C2_IRQ_PRIORITY 5 +#define STM32_I2C_I2C3_IRQ_PRIORITY 5 +#define STM32_I2C_I2C1_DMA_PRIORITY 3 +#define STM32_I2C_I2C2_DMA_PRIORITY 3 +#define STM32_I2C_I2C3_DMA_PRIORITY 3 +#define STM32_I2C_DMA_ERROR_HOOK(i2cp) osalSysHalt("DMA failure") + +/* + * I2S driver system settings. + */ +#define STM32_I2S_USE_SPI2 FALSE +#define STM32_I2S_USE_SPI3 FALSE +#define STM32_I2S_SPI2_IRQ_PRIORITY 10 +#define STM32_I2S_SPI3_IRQ_PRIORITY 10 +#define STM32_I2S_SPI2_DMA_PRIORITY 1 +#define STM32_I2S_SPI3_DMA_PRIORITY 1 +#define STM32_I2S_SPI2_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 3) +#define STM32_I2S_SPI2_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 4) +#define STM32_I2S_SPI3_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 0) +#define STM32_I2S_SPI3_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 7) +#define STM32_I2S_DMA_ERROR_HOOK(i2sp) osalSysHalt("DMA failure") + +/* + * ICU driver system settings. + */ +#define STM32_ICU_USE_TIM1 FALSE +#define STM32_ICU_USE_TIM2 FALSE +#define STM32_ICU_USE_TIM3 FALSE +#define STM32_ICU_USE_TIM4 FALSE +#define STM32_ICU_USE_TIM5 FALSE +#define STM32_ICU_USE_TIM9 FALSE +#define STM32_ICU_TIM1_IRQ_PRIORITY 7 +#define STM32_ICU_TIM2_IRQ_PRIORITY 7 +#define STM32_ICU_TIM3_IRQ_PRIORITY 7 +#define STM32_ICU_TIM4_IRQ_PRIORITY 7 +#define STM32_ICU_TIM5_IRQ_PRIORITY 7 +#define STM32_ICU_TIM9_IRQ_PRIORITY 7 + +/* + * PWM driver system settings. + */ +#define STM32_PWM_USE_ADVANCED FALSE +#define STM32_PWM_USE_TIM1 FALSE +#define STM32_PWM_USE_TIM2 FALSE +#define STM32_PWM_USE_TIM3 FALSE +#define STM32_PWM_USE_TIM4 FALSE +#define STM32_PWM_USE_TIM5 FALSE +#define STM32_PWM_USE_TIM9 FALSE +#define STM32_PWM_TIM1_IRQ_PRIORITY 7 +#define STM32_PWM_TIM2_IRQ_PRIORITY 7 +#define STM32_PWM_TIM3_IRQ_PRIORITY 7 +#define STM32_PWM_TIM4_IRQ_PRIORITY 7 +#define STM32_PWM_TIM5_IRQ_PRIORITY 7 +#define STM32_PWM_TIM9_IRQ_PRIORITY 7 + +/* + * SERIAL driver system settings. + */ +#define STM32_SERIAL_USE_USART1 FALSE +#define STM32_SERIAL_USE_USART2 FALSE +#define STM32_SERIAL_USE_USART6 FALSE +#define STM32_SERIAL_USART1_PRIORITY 12 +#define STM32_SERIAL_USART2_PRIORITY 12 +#define STM32_SERIAL_USART6_PRIORITY 12 + +/* + * SPI driver system settings. + */ +#define STM32_SPI_USE_SPI1 FALSE +#define STM32_SPI_USE_SPI2 FALSE +#define STM32_SPI_USE_SPI3 FALSE +#define STM32_SPI_SPI1_RX_DMA_STREAM STM32_DMA_STREAM_ID(2, 0) +#define STM32_SPI_SPI1_TX_DMA_STREAM STM32_DMA_STREAM_ID(2, 3) +#define STM32_SPI_SPI2_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 3) +#define STM32_SPI_SPI2_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 4) +#define STM32_SPI_SPI3_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 0) +#define STM32_SPI_SPI3_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 7) +#define STM32_SPI_SPI1_DMA_PRIORITY 1 +#define STM32_SPI_SPI2_DMA_PRIORITY 1 +#define STM32_SPI_SPI3_DMA_PRIORITY 1 +#define STM32_SPI_SPI1_IRQ_PRIORITY 10 +#define STM32_SPI_SPI2_IRQ_PRIORITY 10 +#define STM32_SPI_SPI3_IRQ_PRIORITY 10 +#define STM32_SPI_DMA_ERROR_HOOK(spip) osalSysHalt("DMA failure") + +/* + * ST driver system settings. + */ +#define STM32_ST_IRQ_PRIORITY 8 +#define STM32_ST_USE_TIMER 2 + +/* + * UART driver system settings. + */ +#define STM32_UART_USE_USART1 FALSE +#define STM32_UART_USE_USART2 FALSE +#define STM32_UART_USE_USART6 FALSE +#define STM32_UART_USART1_RX_DMA_STREAM STM32_DMA_STREAM_ID(2, 5) +#define STM32_UART_USART1_TX_DMA_STREAM STM32_DMA_STREAM_ID(2, 7) +#define STM32_UART_USART2_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 5) +#define STM32_UART_USART2_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 6) +#define STM32_UART_USART6_RX_DMA_STREAM STM32_DMA_STREAM_ID(2, 2) +#define STM32_UART_USART6_TX_DMA_STREAM STM32_DMA_STREAM_ID(2, 7) +#define STM32_UART_USART1_IRQ_PRIORITY 12 +#define STM32_UART_USART2_IRQ_PRIORITY 12 +#define STM32_UART_USART6_IRQ_PRIORITY 12 +#define STM32_UART_USART1_DMA_PRIORITY 0 +#define STM32_UART_USART2_DMA_PRIORITY 0 +#define STM32_UART_USART6_DMA_PRIORITY 0 +#define STM32_UART_DMA_ERROR_HOOK(uartp) osalSysHalt("DMA failure") + +/* + * USB driver system settings. + */ +#define STM32_USB_USE_OTG1 TRUE +#define STM32_USB_OTG1_IRQ_PRIORITY 14 +#define STM32_USB_OTG1_RX_FIFO_SIZE 512 +#define STM32_USB_OTG_THREAD_PRIO NORMALPRIO+1 +#define STM32_USB_OTG_THREAD_STACK_SIZE 128 +#define STM32_USB_OTGFIFO_FILL_BASEPRI 0 + +/* + * WDG driver system settings. + */ +#define STM32_WDG_USE_IWDG FALSE + +#endif /* MCUCONF_H */ diff --git a/keyboards/vinta/boards/GENERIC_STM32_F042X6/board.c b/platforms/chibios/GENERIC_STM32_F042X6/board/board.c index 754dc5c4dd..7d93b68f9c 100644 --- a/keyboards/vinta/boards/GENERIC_STM32_F042X6/board.c +++ b/platforms/chibios/GENERIC_STM32_F042X6/board/board.c @@ -202,13 +202,14 @@ static void stm32_gpio_init(void) { /* Driver exported functions. */ /*===========================================================================*/ +__attribute__((weak)) void enter_bootloader_mode_if_requested(void) {} + /** * @brief Early initialization code. * @details GPIO ports and system clocks are initialized before everything * else. */ void __early_init(void) { - extern void enter_bootloader_mode_if_requested(void); enter_bootloader_mode_if_requested(); stm32_gpio_init(); diff --git a/keyboards/peiorisboards/ixora/boards/GENERIC_STM32_F042X6/board.h b/platforms/chibios/GENERIC_STM32_F042X6/board/board.h index ee9d31e04a..ee9d31e04a 100644 --- a/keyboards/peiorisboards/ixora/boards/GENERIC_STM32_F042X6/board.h +++ b/platforms/chibios/GENERIC_STM32_F042X6/board/board.h diff --git a/drivers/boards/GENERIC_STM32_F072XB/board.mk b/platforms/chibios/GENERIC_STM32_F042X6/board/board.mk index bd6f878269..842e335905 100644 --- a/drivers/boards/GENERIC_STM32_F072XB/board.mk +++ b/platforms/chibios/GENERIC_STM32_F042X6/board/board.mk @@ -1,8 +1,8 @@ # List of all the board related files. -BOARDSRC = $(BOARD_PATH)/boards/GENERIC_STM32_F072XB/board.c +BOARDSRC = $(BOARD_PATH)/board/board.c # Required include directories -BOARDINC = $(BOARD_PATH)/boards/GENERIC_STM32_F072XB +BOARDINC = $(BOARD_PATH)/board # Shared variables ALLCSRC += $(BOARDSRC) diff --git a/keyboards/peiorisboards/ixora/bootloader_defs.h b/platforms/chibios/GENERIC_STM32_F042X6/configs/bootloader_defs.h index 4994be9c24..4994be9c24 100644 --- a/keyboards/peiorisboards/ixora/bootloader_defs.h +++ b/platforms/chibios/GENERIC_STM32_F042X6/configs/bootloader_defs.h diff --git a/drivers/boards/GENERIC_STM32_F072XB/board.c b/platforms/chibios/GENERIC_STM32_F072XB/board/board.c index c91136e8f6..c91136e8f6 100644 --- a/drivers/boards/GENERIC_STM32_F072XB/board.c +++ b/platforms/chibios/GENERIC_STM32_F072XB/board/board.c diff --git a/drivers/boards/GENERIC_STM32_F072XB/board.h b/platforms/chibios/GENERIC_STM32_F072XB/board/board.h index 87570e62d2..87570e62d2 100644 --- a/drivers/boards/GENERIC_STM32_F072XB/board.h +++ b/platforms/chibios/GENERIC_STM32_F072XB/board/board.h diff --git a/drivers/boards/BLACKPILL_STM32_F411/board.mk b/platforms/chibios/GENERIC_STM32_F072XB/board/board.mk index 93c1e62f5d..842e335905 100644 --- a/drivers/boards/BLACKPILL_STM32_F411/board.mk +++ b/platforms/chibios/GENERIC_STM32_F072XB/board/board.mk @@ -1,8 +1,8 @@ # List of all the board related files. -BOARDSRC = $(BOARD_PATH)/boards/BLACKPILL_STM32_F411/board.c +BOARDSRC = $(BOARD_PATH)/board/board.c # Required include directories -BOARDINC = $(BOARD_PATH)/boards/BLACKPILL_STM32_F411 +BOARDINC = $(BOARD_PATH)/board # Shared variables ALLCSRC += $(BOARDSRC) diff --git a/drivers/boards/GENERIC_STM32_F072XB/bootloader_defs.h b/platforms/chibios/GENERIC_STM32_F072XB/configs/bootloader_defs.h index 02c48c4e6d..02c48c4e6d 100644 --- a/drivers/boards/GENERIC_STM32_F072XB/bootloader_defs.h +++ b/platforms/chibios/GENERIC_STM32_F072XB/configs/bootloader_defs.h diff --git a/drivers/boards/GENERIC_STM32_F303XC/board.c b/platforms/chibios/GENERIC_STM32_F303XC/board/board.c index 9b0fc1b6b9..4722acd648 100644 --- a/drivers/boards/GENERIC_STM32_F303XC/board.c +++ b/platforms/chibios/GENERIC_STM32_F303XC/board/board.c @@ -181,7 +181,7 @@ static void stm32_gpio_init(void) { #endif } -void enter_bootloader_mode_if_requested(void); +__attribute__((weak)) void enter_bootloader_mode_if_requested(void) {} /** * @brief Early initialization code. diff --git a/drivers/boards/GENERIC_STM32_F303XC/board.h b/platforms/chibios/GENERIC_STM32_F303XC/board/board.h index 3579c82770..3579c82770 100644 --- a/drivers/boards/GENERIC_STM32_F303XC/board.h +++ b/platforms/chibios/GENERIC_STM32_F303XC/board/board.h diff --git a/drivers/boards/BLACKPILL_STM32_F401/board.mk b/platforms/chibios/GENERIC_STM32_F303XC/board/board.mk index 33473ed6b1..842e335905 100644 --- a/drivers/boards/BLACKPILL_STM32_F401/board.mk +++ b/platforms/chibios/GENERIC_STM32_F303XC/board/board.mk @@ -1,8 +1,8 @@ # List of all the board related files. -BOARDSRC = $(BOARD_PATH)/boards/BLACKPILL_STM32_F401/board.c +BOARDSRC = $(BOARD_PATH)/board/board.c # Required include directories -BOARDINC = $(BOARD_PATH)/boards/BLACKPILL_STM32_F401 +BOARDINC = $(BOARD_PATH)/board # Shared variables ALLCSRC += $(BOARDSRC) diff --git a/drivers/boards/GENERIC_STM32_F303XC/bootloader_defs.h b/platforms/chibios/GENERIC_STM32_F303XC/configs/bootloader_defs.h index 3b0e9d20a6..3b0e9d20a6 100644 --- a/drivers/boards/GENERIC_STM32_F303XC/bootloader_defs.h +++ b/platforms/chibios/GENERIC_STM32_F303XC/configs/bootloader_defs.h diff --git a/quantum/stm32/chconf.h b/platforms/chibios/GENERIC_STM32_F303XC/configs/chconf.h index b6e66f9e49..aac3303705 100644 --- a/quantum/stm32/chconf.h +++ b/platforms/chibios/GENERIC_STM32_F303XC/configs/chconf.h @@ -26,10 +26,10 @@ */ #ifndef CHCONF_H -# define CHCONF_H +#define CHCONF_H -# define _CHIBIOS_RT_CONF_ -# define _CHIBIOS_RT_CONF_VER_6_0_ +#define _CHIBIOS_RT_CONF_ +#define _CHIBIOS_RT_CONF_VER_6_0_ /*===========================================================================*/ /** @@ -42,34 +42,34 @@ * @brief System time counter resolution. * @note Allowed values are 16 or 32 bits. */ -# if !defined(CH_CFG_ST_RESOLUTION) -# define CH_CFG_ST_RESOLUTION 32 -# endif +#if !defined(CH_CFG_ST_RESOLUTION) +#define CH_CFG_ST_RESOLUTION 32 +#endif /** * @brief System tick frequency. * @details Frequency of the system timer that drives the system ticks. This * setting also defines the system tick time unit. */ -# if !defined(CH_CFG_ST_FREQUENCY) -# define CH_CFG_ST_FREQUENCY 100000 -# endif +#if !defined(CH_CFG_ST_FREQUENCY) +#define CH_CFG_ST_FREQUENCY 100000 +#endif /** * @brief Time intervals data size. * @note Allowed values are 16, 32 or 64 bits. */ -# if !defined(CH_CFG_INTERVALS_SIZE) -# define CH_CFG_INTERVALS_SIZE 32 -# endif +#if !defined(CH_CFG_INTERVALS_SIZE) +#define CH_CFG_INTERVALS_SIZE 32 +#endif /** * @brief Time types data size. * @note Allowed values are 16 or 32 bits. */ -# if !defined(CH_CFG_TIME_TYPES_SIZE) -# define CH_CFG_TIME_TYPES_SIZE 32 -# endif +#if !defined(CH_CFG_TIME_TYPES_SIZE) +#define CH_CFG_TIME_TYPES_SIZE 32 +#endif /** * @brief Time delta constant for the tick-less mode. @@ -79,9 +79,9 @@ * The value one is not valid, timeouts are rounded up to * this value. */ -# if !defined(CH_CFG_ST_TIMEDELTA) -# define CH_CFG_ST_TIMEDELTA 2 -# endif +#if !defined(CH_CFG_ST_TIMEDELTA) +#define CH_CFG_ST_TIMEDELTA 2 +#endif /** @} */ @@ -104,9 +104,9 @@ * @note The round robin preemption is not supported in tickless mode and * must be set to zero in that case. */ -# if !defined(CH_CFG_TIME_QUANTUM) -# define CH_CFG_TIME_QUANTUM 0 -# endif +#if !defined(CH_CFG_TIME_QUANTUM) +#define CH_CFG_TIME_QUANTUM 0 +#endif /** * @brief Managed RAM size. @@ -119,9 +119,9 @@ * provide the @p __heap_base__ and @p __heap_end__ symbols. * @note Requires @p CH_CFG_USE_MEMCORE. */ -# if !defined(CH_CFG_MEMCORE_SIZE) -# define CH_CFG_MEMCORE_SIZE 0 -# endif +#if !defined(CH_CFG_MEMCORE_SIZE) +#define CH_CFG_MEMCORE_SIZE 0 +#endif /** * @brief Idle thread automatic spawn suppression. @@ -130,9 +130,9 @@ * function becomes the idle thread and must implement an * infinite loop. */ -# if !defined(CH_CFG_NO_IDLE_THREAD) -# define CH_CFG_NO_IDLE_THREAD FALSE -# endif +#if !defined(CH_CFG_NO_IDLE_THREAD) +#define CH_CFG_NO_IDLE_THREAD FALSE +#endif /** @} */ @@ -151,9 +151,9 @@ * @note This is not related to the compiler optimization options. * @note The default is @p TRUE. */ -# if !defined(CH_CFG_OPTIMIZE_SPEED) -# define CH_CFG_OPTIMIZE_SPEED TRUE -# endif +#if !defined(CH_CFG_OPTIMIZE_SPEED) +#define CH_CFG_OPTIMIZE_SPEED TRUE +#endif /** @} */ @@ -171,9 +171,9 @@ * * @note The default is @p TRUE. */ -# if !defined(CH_CFG_USE_TM) -# define CH_CFG_USE_TM TRUE -# endif +#if !defined(CH_CFG_USE_TM) +#define CH_CFG_USE_TM TRUE +#endif /** * @brief Threads registry APIs. @@ -181,9 +181,9 @@ * * @note The default is @p TRUE. */ -# if !defined(CH_CFG_USE_REGISTRY) -# define CH_CFG_USE_REGISTRY TRUE -# endif +#if !defined(CH_CFG_USE_REGISTRY) +#define CH_CFG_USE_REGISTRY TRUE +#endif /** * @brief Threads synchronization APIs. @@ -192,9 +192,9 @@ * * @note The default is @p TRUE. */ -# if !defined(CH_CFG_USE_WAITEXIT) -# define CH_CFG_USE_WAITEXIT TRUE -# endif +#if !defined(CH_CFG_USE_WAITEXIT) +#define CH_CFG_USE_WAITEXIT TRUE +#endif /** * @brief Semaphores APIs. @@ -202,9 +202,9 @@ * * @note The default is @p TRUE. */ -# if !defined(CH_CFG_USE_SEMAPHORES) -# define CH_CFG_USE_SEMAPHORES TRUE -# endif +#if !defined(CH_CFG_USE_SEMAPHORES) +#define CH_CFG_USE_SEMAPHORES TRUE +#endif /** * @brief Semaphores queuing mode. @@ -215,9 +215,9 @@ * requirements. * @note Requires @p CH_CFG_USE_SEMAPHORES. */ -# if !defined(CH_CFG_USE_SEMAPHORES_PRIORITY) -# define CH_CFG_USE_SEMAPHORES_PRIORITY FALSE -# endif +#if !defined(CH_CFG_USE_SEMAPHORES_PRIORITY) +#define CH_CFG_USE_SEMAPHORES_PRIORITY FALSE +#endif /** * @brief Mutexes APIs. @@ -225,9 +225,9 @@ * * @note The default is @p TRUE. */ -# if !defined(CH_CFG_USE_MUTEXES) -# define CH_CFG_USE_MUTEXES TRUE -# endif +#if !defined(CH_CFG_USE_MUTEXES) +#define CH_CFG_USE_MUTEXES TRUE +#endif /** * @brief Enables recursive behavior on mutexes. @@ -237,9 +237,9 @@ * @note The default is @p FALSE. * @note Requires @p CH_CFG_USE_MUTEXES. */ -# if !defined(CH_CFG_USE_MUTEXES_RECURSIVE) -# define CH_CFG_USE_MUTEXES_RECURSIVE FALSE -# endif +#if !defined(CH_CFG_USE_MUTEXES_RECURSIVE) +#define CH_CFG_USE_MUTEXES_RECURSIVE FALSE +#endif /** * @brief Conditional Variables APIs. @@ -249,9 +249,9 @@ * @note The default is @p TRUE. * @note Requires @p CH_CFG_USE_MUTEXES. */ -# if !defined(CH_CFG_USE_CONDVARS) -# define CH_CFG_USE_CONDVARS TRUE -# endif +#if !defined(CH_CFG_USE_CONDVARS) +#define CH_CFG_USE_CONDVARS TRUE +#endif /** * @brief Conditional Variables APIs with timeout. @@ -261,9 +261,9 @@ * @note The default is @p TRUE. * @note Requires @p CH_CFG_USE_CONDVARS. */ -# if !defined(CH_CFG_USE_CONDVARS_TIMEOUT) -# define CH_CFG_USE_CONDVARS_TIMEOUT TRUE -# endif +#if !defined(CH_CFG_USE_CONDVARS_TIMEOUT) +#define CH_CFG_USE_CONDVARS_TIMEOUT TRUE +#endif /** * @brief Events Flags APIs. @@ -271,9 +271,9 @@ * * @note The default is @p TRUE. */ -# if !defined(CH_CFG_USE_EVENTS) -# define CH_CFG_USE_EVENTS TRUE -# endif +#if !defined(CH_CFG_USE_EVENTS) +#define CH_CFG_USE_EVENTS TRUE +#endif /** * @brief Events Flags APIs with timeout. @@ -283,9 +283,9 @@ * @note The default is @p TRUE. * @note Requires @p CH_CFG_USE_EVENTS. */ -# if !defined(CH_CFG_USE_EVENTS_TIMEOUT) -# define CH_CFG_USE_EVENTS_TIMEOUT TRUE -# endif +#if !defined(CH_CFG_USE_EVENTS_TIMEOUT) +#define CH_CFG_USE_EVENTS_TIMEOUT TRUE +#endif /** * @brief Synchronous Messages APIs. @@ -294,9 +294,9 @@ * * @note The default is @p TRUE. */ -# if !defined(CH_CFG_USE_MESSAGES) -# define CH_CFG_USE_MESSAGES TRUE -# endif +#if !defined(CH_CFG_USE_MESSAGES) +#define CH_CFG_USE_MESSAGES TRUE +#endif /** * @brief Synchronous Messages queuing mode. @@ -307,9 +307,9 @@ * requirements. * @note Requires @p CH_CFG_USE_MESSAGES. */ -# if !defined(CH_CFG_USE_MESSAGES_PRIORITY) -# define CH_CFG_USE_MESSAGES_PRIORITY TRUE -# endif +#if !defined(CH_CFG_USE_MESSAGES_PRIORITY) +#define CH_CFG_USE_MESSAGES_PRIORITY TRUE +#endif /** * @brief Mailboxes APIs. @@ -319,9 +319,9 @@ * @note The default is @p TRUE. * @note Requires @p CH_CFG_USE_SEMAPHORES. */ -# if !defined(CH_CFG_USE_MAILBOXES) -# define CH_CFG_USE_MAILBOXES TRUE -# endif +#if !defined(CH_CFG_USE_MAILBOXES) +#define CH_CFG_USE_MAILBOXES TRUE +#endif /** * @brief Core Memory Manager APIs. @@ -330,9 +330,9 @@ * * @note The default is @p TRUE. */ -# if !defined(CH_CFG_USE_MEMCORE) -# define CH_CFG_USE_MEMCORE TRUE -# endif +#if !defined(CH_CFG_USE_MEMCORE) +#define CH_CFG_USE_MEMCORE TRUE +#endif /** * @brief Heap Allocator APIs. @@ -344,9 +344,9 @@ * @p CH_CFG_USE_SEMAPHORES. * @note Mutexes are recommended. */ -# if !defined(CH_CFG_USE_HEAP) -# define CH_CFG_USE_HEAP TRUE -# endif +#if !defined(CH_CFG_USE_HEAP) +#define CH_CFG_USE_HEAP TRUE +#endif /** * @brief Memory Pools Allocator APIs. @@ -355,9 +355,9 @@ * * @note The default is @p TRUE. */ -# if !defined(CH_CFG_USE_MEMPOOLS) -# define CH_CFG_USE_MEMPOOLS TRUE -# endif +#if !defined(CH_CFG_USE_MEMPOOLS) +#define CH_CFG_USE_MEMPOOLS TRUE +#endif /** * @brief Objects FIFOs APIs. @@ -366,9 +366,9 @@ * * @note The default is @p TRUE. */ -# if !defined(CH_CFG_USE_OBJ_FIFOS) -# define CH_CFG_USE_OBJ_FIFOS TRUE -# endif +#if !defined(CH_CFG_USE_OBJ_FIFOS) +#define CH_CFG_USE_OBJ_FIFOS TRUE +#endif /** * @brief Pipes APIs. @@ -377,9 +377,9 @@ * * @note The default is @p TRUE. */ -# if !defined(CH_CFG_USE_PIPES) -# define CH_CFG_USE_PIPES TRUE -# endif +#if !defined(CH_CFG_USE_PIPES) +#define CH_CFG_USE_PIPES TRUE +#endif /** * @brief Dynamic Threads APIs. @@ -390,9 +390,9 @@ * @note Requires @p CH_CFG_USE_WAITEXIT. * @note Requires @p CH_CFG_USE_HEAP and/or @p CH_CFG_USE_MEMPOOLS. */ -# if !defined(CH_CFG_USE_DYNAMIC) -# define CH_CFG_USE_DYNAMIC TRUE -# endif +#if !defined(CH_CFG_USE_DYNAMIC) +#define CH_CFG_USE_DYNAMIC TRUE +#endif /** @} */ @@ -410,60 +410,60 @@ * * @note The default is @p FALSE. */ -# if !defined(CH_CFG_USE_FACTORY) -# define CH_CFG_USE_FACTORY TRUE -# endif +#if !defined(CH_CFG_USE_FACTORY) +#define CH_CFG_USE_FACTORY TRUE +#endif /** * @brief Maximum length for object names. * @details If the specified length is zero then the name is stored by * pointer but this could have unintended side effects. */ -# if !defined(CH_CFG_FACTORY_MAX_NAMES_LENGTH) -# define CH_CFG_FACTORY_MAX_NAMES_LENGTH 8 -# endif +#if !defined(CH_CFG_FACTORY_MAX_NAMES_LENGTH) +#define CH_CFG_FACTORY_MAX_NAMES_LENGTH 8 +#endif /** * @brief Enables the registry of generic objects. */ -# if !defined(CH_CFG_FACTORY_OBJECTS_REGISTRY) -# define CH_CFG_FACTORY_OBJECTS_REGISTRY TRUE -# endif +#if !defined(CH_CFG_FACTORY_OBJECTS_REGISTRY) +#define CH_CFG_FACTORY_OBJECTS_REGISTRY TRUE +#endif /** * @brief Enables factory for generic buffers. */ -# if !defined(CH_CFG_FACTORY_GENERIC_BUFFERS) -# define CH_CFG_FACTORY_GENERIC_BUFFERS TRUE -# endif +#if !defined(CH_CFG_FACTORY_GENERIC_BUFFERS) +#define CH_CFG_FACTORY_GENERIC_BUFFERS TRUE +#endif /** * @brief Enables factory for semaphores. */ -# if !defined(CH_CFG_FACTORY_SEMAPHORES) -# define CH_CFG_FACTORY_SEMAPHORES TRUE -# endif +#if !defined(CH_CFG_FACTORY_SEMAPHORES) +#define CH_CFG_FACTORY_SEMAPHORES TRUE +#endif /** * @brief Enables factory for mailboxes. */ -# if !defined(CH_CFG_FACTORY_MAILBOXES) -# define CH_CFG_FACTORY_MAILBOXES TRUE -# endif +#if !defined(CH_CFG_FACTORY_MAILBOXES) +#define CH_CFG_FACTORY_MAILBOXES TRUE +#endif /** * @brief Enables factory for objects FIFOs. */ -# if !defined(CH_CFG_FACTORY_OBJ_FIFOS) -# define CH_CFG_FACTORY_OBJ_FIFOS TRUE -# endif +#if !defined(CH_CFG_FACTORY_OBJ_FIFOS) +#define CH_CFG_FACTORY_OBJ_FIFOS TRUE +#endif /** * @brief Enables factory for Pipes. */ -# if !defined(CH_CFG_FACTORY_PIPES) || defined(__DOXYGEN__) -# define CH_CFG_FACTORY_PIPES TRUE -# endif +#if !defined(CH_CFG_FACTORY_PIPES) || defined(__DOXYGEN__) +#define CH_CFG_FACTORY_PIPES TRUE +#endif /** @} */ @@ -479,9 +479,9 @@ * * @note The default is @p FALSE. */ -# if !defined(CH_DBG_STATISTICS) -# define CH_DBG_STATISTICS FALSE -# endif +#if !defined(CH_DBG_STATISTICS) +#define CH_DBG_STATISTICS FALSE +#endif /** * @brief Debug option, system state check. @@ -490,9 +490,9 @@ * * @note The default is @p FALSE. */ -# if !defined(CH_DBG_SYSTEM_STATE_CHECK) -# define CH_DBG_SYSTEM_STATE_CHECK FALSE -# endif +#if !defined(CH_DBG_SYSTEM_STATE_CHECK) +#define CH_DBG_SYSTEM_STATE_CHECK FALSE +#endif /** * @brief Debug option, parameters checks. @@ -501,9 +501,9 @@ * * @note The default is @p FALSE. */ -# if !defined(CH_DBG_ENABLE_CHECKS) -# define CH_DBG_ENABLE_CHECKS FALSE -# endif +#if !defined(CH_DBG_ENABLE_CHECKS) +#define CH_DBG_ENABLE_CHECKS FALSE +#endif /** * @brief Debug option, consistency checks. @@ -513,9 +513,9 @@ * * @note The default is @p FALSE. */ -# if !defined(CH_DBG_ENABLE_ASSERTS) -# define CH_DBG_ENABLE_ASSERTS FALSE -# endif +#if !defined(CH_DBG_ENABLE_ASSERTS) +#define CH_DBG_ENABLE_ASSERTS FALSE +#endif /** * @brief Debug option, trace buffer. @@ -523,18 +523,18 @@ * * @note The default is @p CH_DBG_TRACE_MASK_DISABLED. */ -# if !defined(CH_DBG_TRACE_MASK) -# define CH_DBG_TRACE_MASK CH_DBG_TRACE_MASK_DISABLED -# endif +#if !defined(CH_DBG_TRACE_MASK) +#define CH_DBG_TRACE_MASK CH_DBG_TRACE_MASK_DISABLED +#endif /** * @brief Trace buffer entries. * @note The trace buffer is only allocated if @p CH_DBG_TRACE_MASK is * different from @p CH_DBG_TRACE_MASK_DISABLED. */ -# if !defined(CH_DBG_TRACE_BUFFER_SIZE) -# define CH_DBG_TRACE_BUFFER_SIZE 128 -# endif +#if !defined(CH_DBG_TRACE_BUFFER_SIZE) +#define CH_DBG_TRACE_BUFFER_SIZE 128 +#endif /** * @brief Debug option, stack checks. @@ -546,9 +546,9 @@ * @note The default failure mode is to halt the system with the global * @p panic_msg variable set to @p NULL. */ -# if !defined(CH_DBG_ENABLE_STACK_CHECK) -# define CH_DBG_ENABLE_STACK_CHECK TRUE -# endif +#if !defined(CH_DBG_ENABLE_STACK_CHECK) +#define CH_DBG_ENABLE_STACK_CHECK TRUE +#endif /** * @brief Debug option, stacks initialization. @@ -558,9 +558,9 @@ * * @note The default is @p FALSE. */ -# if !defined(CH_DBG_FILL_THREADS) -# define CH_DBG_FILL_THREADS FALSE -# endif +#if !defined(CH_DBG_FILL_THREADS) +#define CH_DBG_FILL_THREADS FALSE +#endif /** * @brief Debug option, threads profiling. @@ -571,9 +571,9 @@ * @note This debug option is not currently compatible with the * tickless mode. */ -# if !defined(CH_DBG_THREADS_PROFILING) -# define CH_DBG_THREADS_PROFILING FALSE -# endif +#if !defined(CH_DBG_THREADS_PROFILING) +#define CH_DBG_THREADS_PROFILING FALSE +#endif /** @} */ @@ -588,22 +588,24 @@ * @brief System structure extension. * @details User fields added to the end of the @p ch_system_t structure. */ -# define CH_CFG_SYSTEM_EXTRA_FIELDS /* Add threads custom fields here.*/ +#define CH_CFG_SYSTEM_EXTRA_FIELDS \ + /* Add threads custom fields here.*/ /** * @brief System initialization hook. * @details User initialization code added to the @p chSysInit() function * just before interrupts are enabled globally. */ -# define CH_CFG_SYSTEM_INIT_HOOK() \ - { /* Add threads initialization code here.*/ \ - } +#define CH_CFG_SYSTEM_INIT_HOOK() { \ + /* Add threads initialization code here.*/ \ +} /** * @brief Threads descriptor structure extension. * @details User fields added to the end of the @p thread_t structure. */ -# define CH_CFG_THREAD_EXTRA_FIELDS /* Add threads custom fields here.*/ +#define CH_CFG_THREAD_EXTRA_FIELDS \ + /* Add threads custom fields here.*/ /** * @brief Threads initialization hook. @@ -612,39 +614,39 @@ * @note It is invoked from within @p _thread_init() and implicitly from all * the threads creation APIs. */ -# define CH_CFG_THREAD_INIT_HOOK(tp) \ - { /* Add threads initialization code here.*/ \ - } +#define CH_CFG_THREAD_INIT_HOOK(tp) { \ + /* Add threads initialization code here.*/ \ +} /** * @brief Threads finalization hook. * @details User finalization code added to the @p chThdExit() API. */ -# define CH_CFG_THREAD_EXIT_HOOK(tp) \ - { /* Add threads finalization code here.*/ \ - } +#define CH_CFG_THREAD_EXIT_HOOK(tp) { \ + /* Add threads finalization code here.*/ \ +} /** * @brief Context switch hook. * @details This hook is invoked just before switching between threads. */ -# define CH_CFG_CONTEXT_SWITCH_HOOK(ntp, otp) \ - { /* Context switch code here.*/ \ - } +#define CH_CFG_CONTEXT_SWITCH_HOOK(ntp, otp) { \ + /* Context switch code here.*/ \ +} /** * @brief ISR enter hook. */ -# define CH_CFG_IRQ_PROLOGUE_HOOK() \ - { /* IRQ prologue code here.*/ \ - } +#define CH_CFG_IRQ_PROLOGUE_HOOK() { \ + /* IRQ prologue code here.*/ \ +} /** * @brief ISR exit hook. */ -# define CH_CFG_IRQ_EPILOGUE_HOOK() \ - { /* IRQ epilogue code here.*/ \ - } +#define CH_CFG_IRQ_EPILOGUE_HOOK() { \ + /* IRQ epilogue code here.*/ \ +} /** * @brief Idle thread enter hook. @@ -652,9 +654,9 @@ * should be invoked from here. * @note This macro can be used to activate a power saving mode. */ -# define CH_CFG_IDLE_ENTER_HOOK() \ - { /* Idle-enter code here.*/ \ - } +#define CH_CFG_IDLE_ENTER_HOOK() { \ + /* Idle-enter code here.*/ \ +} /** * @brief Idle thread leave hook. @@ -662,44 +664,44 @@ * should be invoked from here. * @note This macro can be used to deactivate a power saving mode. */ -# define CH_CFG_IDLE_LEAVE_HOOK() \ - { /* Idle-leave code here.*/ \ - } +#define CH_CFG_IDLE_LEAVE_HOOK() { \ + /* Idle-leave code here.*/ \ +} /** * @brief Idle Loop hook. * @details This hook is continuously invoked by the idle thread loop. */ -# define CH_CFG_IDLE_LOOP_HOOK() \ - { /* Idle loop code here.*/ \ - } +#define CH_CFG_IDLE_LOOP_HOOK() { \ + /* Idle loop code here.*/ \ +} /** * @brief System tick event hook. * @details This hook is invoked in the system tick handler immediately * after processing the virtual timers queue. */ -# define CH_CFG_SYSTEM_TICK_HOOK() \ - { /* System tick event code here.*/ \ - } +#define CH_CFG_SYSTEM_TICK_HOOK() { \ + /* System tick event code here.*/ \ +} /** * @brief System halt hook. * @details This hook is invoked in case to a system halting error before * the system is halted. */ -# define CH_CFG_SYSTEM_HALT_HOOK(reason) \ - { /* System halt code here.*/ \ - } +#define CH_CFG_SYSTEM_HALT_HOOK(reason) { \ + /* System halt code here.*/ \ +} /** * @brief Trace hook. * @details This hook is invoked each time a new record is written in the * trace buffer. */ -# define CH_CFG_TRACE_HOOK(tep) \ - { /* Trace code here.*/ \ - } +#define CH_CFG_TRACE_HOOK(tep) { \ + /* Trace code here.*/ \ +} /** @} */ @@ -707,6 +709,6 @@ /* Port-specific settings (override port settings defaulted in chcore.h). */ /*===========================================================================*/ -#endif /* CHCONF_H */ +#endif /* CHCONF_H */ /** @} */ diff --git a/quantum/stm32/halconf.h b/platforms/chibios/GENERIC_STM32_F303XC/configs/halconf.h index b6c7b392ca..6b48e289f9 100644 --- a/quantum/stm32/halconf.h +++ b/platforms/chibios/GENERIC_STM32_F303XC/configs/halconf.h @@ -26,173 +26,173 @@ */ #ifndef HALCONF_H -# define HALCONF_H +#define HALCONF_H -# define _CHIBIOS_HAL_CONF_ -# define _CHIBIOS_HAL_CONF_VER_7_0_ +#define _CHIBIOS_HAL_CONF_ +#define _CHIBIOS_HAL_CONF_VER_7_0_ -# include "mcuconf.h" +#include "mcuconf.h" /** * @brief Enables the PAL subsystem. */ -# if !defined(HAL_USE_PAL) || defined(__DOXYGEN__) -# define HAL_USE_PAL TRUE -# endif +#if !defined(HAL_USE_PAL) || defined(__DOXYGEN__) +#define HAL_USE_PAL TRUE +#endif /** * @brief Enables the ADC subsystem. */ -# if !defined(HAL_USE_ADC) || defined(__DOXYGEN__) -# define HAL_USE_ADC FALSE -# endif +#if !defined(HAL_USE_ADC) || defined(__DOXYGEN__) +#define HAL_USE_ADC FALSE +#endif /** * @brief Enables the CAN subsystem. */ -# if !defined(HAL_USE_CAN) || defined(__DOXYGEN__) -# define HAL_USE_CAN FALSE -# endif +#if !defined(HAL_USE_CAN) || defined(__DOXYGEN__) +#define HAL_USE_CAN FALSE +#endif /** * @brief Enables the cryptographic subsystem. */ -# if !defined(HAL_USE_CRY) || defined(__DOXYGEN__) -# define HAL_USE_CRY FALSE -# endif +#if !defined(HAL_USE_CRY) || defined(__DOXYGEN__) +#define HAL_USE_CRY FALSE +#endif /** * @brief Enables the DAC subsystem. */ -# if !defined(HAL_USE_DAC) || defined(__DOXYGEN__) -# define HAL_USE_DAC TRUE -# endif +#if !defined(HAL_USE_DAC) || defined(__DOXYGEN__) +#define HAL_USE_DAC TRUE +#endif /** * @brief Enables the GPT subsystem. */ -# if !defined(HAL_USE_GPT) || defined(__DOXYGEN__) -# define HAL_USE_GPT TRUE -# endif +#if !defined(HAL_USE_GPT) || defined(__DOXYGEN__) +#define HAL_USE_GPT TRUE +#endif /** * @brief Enables the I2C subsystem. */ -# if !defined(HAL_USE_I2C) || defined(__DOXYGEN__) -# define HAL_USE_I2C TRUE -# endif +#if !defined(HAL_USE_I2C) || defined(__DOXYGEN__) +#define HAL_USE_I2C TRUE +#endif /** * @brief Enables the I2S subsystem. */ -# if !defined(HAL_USE_I2S) || defined(__DOXYGEN__) -# define HAL_USE_I2S FALSE -# endif +#if !defined(HAL_USE_I2S) || defined(__DOXYGEN__) +#define HAL_USE_I2S FALSE +#endif /** * @brief Enables the ICU subsystem. */ -# if !defined(HAL_USE_ICU) || defined(__DOXYGEN__) -# define HAL_USE_ICU FALSE -# endif +#if !defined(HAL_USE_ICU) || defined(__DOXYGEN__) +#define HAL_USE_ICU FALSE +#endif /** * @brief Enables the MAC subsystem. */ -# if !defined(HAL_USE_MAC) || defined(__DOXYGEN__) -# define HAL_USE_MAC FALSE -# endif +#if !defined(HAL_USE_MAC) || defined(__DOXYGEN__) +#define HAL_USE_MAC FALSE +#endif /** * @brief Enables the MMC_SPI subsystem. */ -# if !defined(HAL_USE_MMC_SPI) || defined(__DOXYGEN__) -# define HAL_USE_MMC_SPI FALSE -# endif +#if !defined(HAL_USE_MMC_SPI) || defined(__DOXYGEN__) +#define HAL_USE_MMC_SPI FALSE +#endif /** * @brief Enables the PWM subsystem. */ -# if !defined(HAL_USE_PWM) || defined(__DOXYGEN__) -# define HAL_USE_PWM TRUE -# endif +#if !defined(HAL_USE_PWM) || defined(__DOXYGEN__) +#define HAL_USE_PWM TRUE +#endif /** * @brief Enables the RTC subsystem. */ -# if !defined(HAL_USE_RTC) || defined(__DOXYGEN__) -# define HAL_USE_RTC FALSE -# endif +#if !defined(HAL_USE_RTC) || defined(__DOXYGEN__) +#define HAL_USE_RTC FALSE +#endif /** * @brief Enables the SDC subsystem. */ -# if !defined(HAL_USE_SDC) || defined(__DOXYGEN__) -# define HAL_USE_SDC FALSE -# endif +#if !defined(HAL_USE_SDC) || defined(__DOXYGEN__) +#define HAL_USE_SDC FALSE +#endif /** * @brief Enables the SERIAL subsystem. */ -# if !defined(HAL_USE_SERIAL) || defined(__DOXYGEN__) -# define HAL_USE_SERIAL FALSE -# endif +#if !defined(HAL_USE_SERIAL) || defined(__DOXYGEN__) +#define HAL_USE_SERIAL FALSE +#endif /** * @brief Enables the SERIAL over USB subsystem. */ -# if !defined(HAL_USE_SERIAL_USB) || defined(__DOXYGEN__) -# define HAL_USE_SERIAL_USB TRUE -# endif +#if !defined(HAL_USE_SERIAL_USB) || defined(__DOXYGEN__) +#define HAL_USE_SERIAL_USB TRUE +#endif /** * @brief Enables the SIO subsystem. */ -# if !defined(HAL_USE_SIO) || defined(__DOXYGEN__) -# define HAL_USE_SIO FALSE -# endif +#if !defined(HAL_USE_SIO) || defined(__DOXYGEN__) +#define HAL_USE_SIO FALSE +#endif /** * @brief Enables the SPI subsystem. */ -# if !defined(HAL_USE_SPI) || defined(__DOXYGEN__) -# define HAL_USE_SPI TRUE -# endif +#if !defined(HAL_USE_SPI) || defined(__DOXYGEN__) +#define HAL_USE_SPI TRUE +#endif /** * @brief Enables the TRNG subsystem. */ -# if !defined(HAL_USE_TRNG) || defined(__DOXYGEN__) -# define HAL_USE_TRNG FALSE -# endif +#if !defined(HAL_USE_TRNG) || defined(__DOXYGEN__) +#define HAL_USE_TRNG FALSE +#endif /** * @brief Enables the UART subsystem. */ -# if !defined(HAL_USE_UART) || defined(__DOXYGEN__) -# define HAL_USE_UART FALSE -# endif +#if !defined(HAL_USE_UART) || defined(__DOXYGEN__) +#define HAL_USE_UART FALSE +#endif /** * @brief Enables the USB subsystem. */ -# if !defined(HAL_USE_USB) || defined(__DOXYGEN__) -# define HAL_USE_USB TRUE -# endif +#if !defined(HAL_USE_USB) || defined(__DOXYGEN__) +#define HAL_USE_USB TRUE +#endif /** * @brief Enables the WDG subsystem. */ -# if !defined(HAL_USE_WDG) || defined(__DOXYGEN__) -# define HAL_USE_WDG FALSE -# endif +#if !defined(HAL_USE_WDG) || defined(__DOXYGEN__) +#define HAL_USE_WDG FALSE +#endif /** * @brief Enables the WSPI subsystem. */ -# if !defined(HAL_USE_WSPI) || defined(__DOXYGEN__) -# define HAL_USE_WSPI FALSE -# endif +#if !defined(HAL_USE_WSPI) || defined(__DOXYGEN__) +#define HAL_USE_WSPI FALSE +#endif /*===========================================================================*/ /* PAL driver related settings. */ @@ -202,17 +202,17 @@ * @brief Enables synchronous APIs. * @note Disabling this option saves both code and data space. */ -# if !defined(PAL_USE_CALLBACKS) || defined(__DOXYGEN__) -# define PAL_USE_CALLBACKS TRUE -# endif +#if !defined(PAL_USE_CALLBACKS) || defined(__DOXYGEN__) +#define PAL_USE_CALLBACKS TRUE +#endif /** * @brief Enables synchronous APIs. * @note Disabling this option saves both code and data space. */ -# if !defined(PAL_USE_WAIT) || defined(__DOXYGEN__) -# define PAL_USE_WAIT TRUE -# endif +#if !defined(PAL_USE_WAIT) || defined(__DOXYGEN__) +#define PAL_USE_WAIT TRUE +#endif /*===========================================================================*/ /* ADC driver related settings. */ @@ -222,17 +222,17 @@ * @brief Enables synchronous APIs. * @note Disabling this option saves both code and data space. */ -# if !defined(ADC_USE_WAIT) || defined(__DOXYGEN__) -# define ADC_USE_WAIT TRUE -# endif +#if !defined(ADC_USE_WAIT) || defined(__DOXYGEN__) +#define ADC_USE_WAIT TRUE +#endif /** * @brief Enables the @p adcAcquireBus() and @p adcReleaseBus() APIs. * @note Disabling this option saves both code and data space. */ -# if !defined(ADC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -# define ADC_USE_MUTUAL_EXCLUSION TRUE -# endif +#if !defined(ADC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) +#define ADC_USE_MUTUAL_EXCLUSION TRUE +#endif /*===========================================================================*/ /* CAN driver related settings. */ @@ -241,16 +241,16 @@ /** * @brief Sleep mode related APIs inclusion switch. */ -# if !defined(CAN_USE_SLEEP_MODE) || defined(__DOXYGEN__) -# define CAN_USE_SLEEP_MODE TRUE -# endif +#if !defined(CAN_USE_SLEEP_MODE) || defined(__DOXYGEN__) +#define CAN_USE_SLEEP_MODE TRUE +#endif /** * @brief Enforces the driver to use direct callbacks rather than OSAL events. */ -# if !defined(CAN_ENFORCE_USE_CALLBACKS) || defined(__DOXYGEN__) -# define CAN_ENFORCE_USE_CALLBACKS FALSE -# endif +#if !defined(CAN_ENFORCE_USE_CALLBACKS) || defined(__DOXYGEN__) +#define CAN_ENFORCE_USE_CALLBACKS FALSE +#endif /*===========================================================================*/ /* CRY driver related settings. */ @@ -263,16 +263,16 @@ * hardware. * @note Fall-back implementations may not be present for all algorithms. */ -# if !defined(HAL_CRY_USE_FALLBACK) || defined(__DOXYGEN__) -# define HAL_CRY_USE_FALLBACK FALSE -# endif +#if !defined(HAL_CRY_USE_FALLBACK) || defined(__DOXYGEN__) +#define HAL_CRY_USE_FALLBACK FALSE +#endif /** * @brief Makes the driver forcibly use the fall-back implementations. */ -# if !defined(HAL_CRY_ENFORCE_FALLBACK) || defined(__DOXYGEN__) -# define HAL_CRY_ENFORCE_FALLBACK FALSE -# endif +#if !defined(HAL_CRY_ENFORCE_FALLBACK) || defined(__DOXYGEN__) +#define HAL_CRY_ENFORCE_FALLBACK FALSE +#endif /*===========================================================================*/ /* DAC driver related settings. */ @@ -282,17 +282,17 @@ * @brief Enables synchronous APIs. * @note Disabling this option saves both code and data space. */ -# if !defined(DAC_USE_WAIT) || defined(__DOXYGEN__) -# define DAC_USE_WAIT TRUE -# endif +#if !defined(DAC_USE_WAIT) || defined(__DOXYGEN__) +#define DAC_USE_WAIT TRUE +#endif /** * @brief Enables the @p dacAcquireBus() and @p dacReleaseBus() APIs. * @note Disabling this option saves both code and data space. */ -# if !defined(DAC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -# define DAC_USE_MUTUAL_EXCLUSION TRUE -# endif +#if !defined(DAC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) +#define DAC_USE_MUTUAL_EXCLUSION TRUE +#endif /*===========================================================================*/ /* I2C driver related settings. */ @@ -301,9 +301,9 @@ /** * @brief Enables the mutual exclusion APIs on the I2C bus. */ -# if !defined(I2C_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -# define I2C_USE_MUTUAL_EXCLUSION TRUE -# endif +#if !defined(I2C_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) +#define I2C_USE_MUTUAL_EXCLUSION TRUE +#endif /*===========================================================================*/ /* MAC driver related settings. */ @@ -312,16 +312,16 @@ /** * @brief Enables the zero-copy API. */ -# if !defined(MAC_USE_ZERO_COPY) || defined(__DOXYGEN__) -# define MAC_USE_ZERO_COPY FALSE -# endif +#if !defined(MAC_USE_ZERO_COPY) || defined(__DOXYGEN__) +#define MAC_USE_ZERO_COPY FALSE +#endif /** * @brief Enables an event sources for incoming packets. */ -# if !defined(MAC_USE_EVENTS) || defined(__DOXYGEN__) -# define MAC_USE_EVENTS TRUE -# endif +#if !defined(MAC_USE_EVENTS) || defined(__DOXYGEN__) +#define MAC_USE_EVENTS TRUE +#endif /*===========================================================================*/ /* MMC_SPI driver related settings. */ @@ -335,9 +335,9 @@ * This option is recommended also if the SPI driver does not * use a DMA channel and heavily loads the CPU. */ -# if !defined(MMC_NICE_WAITING) || defined(__DOXYGEN__) -# define MMC_NICE_WAITING TRUE -# endif +#if !defined(MMC_NICE_WAITING) || defined(__DOXYGEN__) +#define MMC_NICE_WAITING TRUE +#endif /*===========================================================================*/ /* SDC driver related settings. */ @@ -347,18 +347,18 @@ * @brief Number of initialization attempts before rejecting the card. * @note Attempts are performed at 10mS intervals. */ -# if !defined(SDC_INIT_RETRY) || defined(__DOXYGEN__) -# define SDC_INIT_RETRY 100 -# endif +#if !defined(SDC_INIT_RETRY) || defined(__DOXYGEN__) +#define SDC_INIT_RETRY 100 +#endif /** * @brief Include support for MMC cards. * @note MMC support is not yet implemented so this option must be kept * at @p FALSE. */ -# if !defined(SDC_MMC_SUPPORT) || defined(__DOXYGEN__) -# define SDC_MMC_SUPPORT FALSE -# endif +#if !defined(SDC_MMC_SUPPORT) || defined(__DOXYGEN__) +#define SDC_MMC_SUPPORT FALSE +#endif /** * @brief Delays insertions. @@ -366,23 +366,23 @@ * routines releasing some extra CPU time for the threads with * lower priority, this may slow down the driver a bit however. */ -# if !defined(SDC_NICE_WAITING) || defined(__DOXYGEN__) -# define SDC_NICE_WAITING TRUE -# endif +#if !defined(SDC_NICE_WAITING) || defined(__DOXYGEN__) +#define SDC_NICE_WAITING TRUE +#endif /** * @brief OCR initialization constant for V20 cards. */ -# if !defined(SDC_INIT_OCR_V20) || defined(__DOXYGEN__) -# define SDC_INIT_OCR_V20 0x50FF8000U -# endif +#if !defined(SDC_INIT_OCR_V20) || defined(__DOXYGEN__) +#define SDC_INIT_OCR_V20 0x50FF8000U +#endif /** * @brief OCR initialization constant for non-V20 cards. */ -# if !defined(SDC_INIT_OCR) || defined(__DOXYGEN__) -# define SDC_INIT_OCR 0x80100000U -# endif +#if !defined(SDC_INIT_OCR) || defined(__DOXYGEN__) +#define SDC_INIT_OCR 0x80100000U +#endif /*===========================================================================*/ /* SERIAL driver related settings. */ @@ -393,9 +393,9 @@ * @details Configuration parameter, this is the baud rate selected for the * default configuration. */ -# if !defined(SERIAL_DEFAULT_BITRATE) || defined(__DOXYGEN__) -# define SERIAL_DEFAULT_BITRATE 38400 -# endif +#if !defined(SERIAL_DEFAULT_BITRATE) || defined(__DOXYGEN__) +#define SERIAL_DEFAULT_BITRATE 38400 +#endif /** * @brief Serial buffers size. @@ -404,9 +404,9 @@ * @note The default is 16 bytes for both the transmission and receive * buffers. */ -# if !defined(SERIAL_BUFFERS_SIZE) || defined(__DOXYGEN__) -# define SERIAL_BUFFERS_SIZE 16 -# endif +#if !defined(SERIAL_BUFFERS_SIZE) || defined(__DOXYGEN__) +#define SERIAL_BUFFERS_SIZE 16 +#endif /*===========================================================================*/ /* SERIAL_USB driver related setting. */ @@ -419,17 +419,17 @@ * @note The default is 256 bytes for both the transmission and receive * buffers. */ -# if !defined(SERIAL_USB_BUFFERS_SIZE) || defined(__DOXYGEN__) -# define SERIAL_USB_BUFFERS_SIZE 1 -# endif +#if !defined(SERIAL_USB_BUFFERS_SIZE) || defined(__DOXYGEN__) +#define SERIAL_USB_BUFFERS_SIZE 1 +#endif /** * @brief Serial over USB number of buffers. * @note The default is 2 buffers. */ -# if !defined(SERIAL_USB_BUFFERS_NUMBER) || defined(__DOXYGEN__) -# define SERIAL_USB_BUFFERS_NUMBER 2 -# endif +#if !defined(SERIAL_USB_BUFFERS_NUMBER) || defined(__DOXYGEN__) +#define SERIAL_USB_BUFFERS_NUMBER 2 +#endif /*===========================================================================*/ /* SPI driver related settings. */ @@ -439,33 +439,34 @@ * @brief Enables synchronous APIs. * @note Disabling this option saves both code and data space. */ -# if !defined(SPI_USE_WAIT) || defined(__DOXYGEN__) -# define SPI_USE_WAIT TRUE -# endif +#if !defined(SPI_USE_WAIT) || defined(__DOXYGEN__) +#define SPI_USE_WAIT TRUE +#endif /** * @brief Enables circular transfers APIs. * @note Disabling this option saves both code and data space. */ -# if !defined(SPI_USE_CIRCULAR) || defined(__DOXYGEN__) -# define SPI_USE_CIRCULAR FALSE -# endif +#if !defined(SPI_USE_CIRCULAR) || defined(__DOXYGEN__) +#define SPI_USE_CIRCULAR FALSE +#endif + /** * @brief Enables the @p spiAcquireBus() and @p spiReleaseBus() APIs. * @note Disabling this option saves both code and data space. */ -# if !defined(SPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -# define SPI_USE_MUTUAL_EXCLUSION TRUE -# endif +#if !defined(SPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) +#define SPI_USE_MUTUAL_EXCLUSION TRUE +#endif /** * @brief Handling method for SPI CS line. * @note Disabling this option saves both code and data space. */ -# if !defined(SPI_SELECT_MODE) || defined(__DOXYGEN__) -# define SPI_SELECT_MODE SPI_SELECT_MODE_PAD -# endif +#if !defined(SPI_SELECT_MODE) || defined(__DOXYGEN__) +#define SPI_SELECT_MODE SPI_SELECT_MODE_PAD +#endif /*===========================================================================*/ /* UART driver related settings. */ @@ -475,17 +476,17 @@ * @brief Enables synchronous APIs. * @note Disabling this option saves both code and data space. */ -# if !defined(UART_USE_WAIT) || defined(__DOXYGEN__) -# define UART_USE_WAIT FALSE -# endif +#if !defined(UART_USE_WAIT) || defined(__DOXYGEN__) +#define UART_USE_WAIT FALSE +#endif /** * @brief Enables the @p uartAcquireBus() and @p uartReleaseBus() APIs. * @note Disabling this option saves both code and data space. */ -# if !defined(UART_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -# define UART_USE_MUTUAL_EXCLUSION FALSE -# endif +#if !defined(UART_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) +#define UART_USE_MUTUAL_EXCLUSION FALSE +#endif /*===========================================================================*/ /* USB driver related settings. */ @@ -495,9 +496,9 @@ * @brief Enables synchronous APIs. * @note Disabling this option saves both code and data space. */ -# if !defined(USB_USE_WAIT) || defined(__DOXYGEN__) -# define USB_USE_WAIT TRUE -# endif +#if !defined(USB_USE_WAIT) || defined(__DOXYGEN__) +#define USB_USE_WAIT TRUE +#endif /*===========================================================================*/ /* WSPI driver related settings. */ @@ -507,17 +508,17 @@ * @brief Enables synchronous APIs. * @note Disabling this option saves both code and data space. */ -# if !defined(WSPI_USE_WAIT) || defined(__DOXYGEN__) -# define WSPI_USE_WAIT TRUE -# endif +#if !defined(WSPI_USE_WAIT) || defined(__DOXYGEN__) +#define WSPI_USE_WAIT TRUE +#endif /** * @brief Enables the @p wspiAcquireBus() and @p wspiReleaseBus() APIs. * @note Disabling this option saves both code and data space. */ -# if !defined(WSPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -# define WSPI_USE_MUTUAL_EXCLUSION TRUE -# endif +#if !defined(WSPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) +#define WSPI_USE_MUTUAL_EXCLUSION TRUE +#endif #endif /* HALCONF_H */ diff --git a/platforms/chibios/GENERIC_STM32_F303XC/configs/mcuconf.h b/platforms/chibios/GENERIC_STM32_F303XC/configs/mcuconf.h new file mode 100644 index 0000000000..3b15883485 --- /dev/null +++ b/platforms/chibios/GENERIC_STM32_F303XC/configs/mcuconf.h @@ -0,0 +1,273 @@ +/* + ChibiOS - Copyright (C) 2006..2018 Giovanni Di Sirio + + Licensed under the Apache License, Version 2.0 (the "License"); + you may not use this file except in compliance with the License. + You may obtain a copy of the License at + + http://www.apache.org/licenses/LICENSE-2.0 + + Unless required by applicable law or agreed to in writing, software + distributed under the License is distributed on an "AS IS" BASIS, + WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + See the License for the specific language governing permissions and + limitations under the License. +*/ + +#ifndef MCUCONF_H +#define MCUCONF_H + +/* + * STM32F3xx drivers configuration. + * The following settings override the default settings present in + * the various device driver implementation headers. + * Note that the settings for each driver only have effect if the whole + * driver is enabled in halconf.h. + * + * IRQ priorities: + * 15...0 Lowest...Highest. + * + * DMA priorities: + * 0...3 Lowest...Highest. + */ + +#define STM32F3xx_MCUCONF +#define STM32F303_MCUCONF + +/* + * HAL driver system settings. + */ +#define STM32_NO_INIT FALSE +#define STM32_PVD_ENABLE FALSE +#define STM32_PLS STM32_PLS_LEV0 +#define STM32_HSI_ENABLED TRUE +#define STM32_LSI_ENABLED TRUE +#define STM32_HSE_ENABLED TRUE +#define STM32_LSE_ENABLED FALSE +#define STM32_SW STM32_SW_PLL +#define STM32_PLLSRC STM32_PLLSRC_HSE +#define STM32_PREDIV_VALUE 1 +#define STM32_PLLMUL_VALUE 9 +#define STM32_HPRE STM32_HPRE_DIV1 +#define STM32_PPRE1 STM32_PPRE1_DIV2 +#define STM32_PPRE2 STM32_PPRE2_DIV2 +#define STM32_MCOSEL STM32_MCOSEL_NOCLOCK +#define STM32_ADC12PRES STM32_ADC12PRES_DIV1 +#define STM32_ADC34PRES STM32_ADC34PRES_DIV1 +#define STM32_USART1SW STM32_USART1SW_PCLK +#define STM32_USART2SW STM32_USART2SW_PCLK +#define STM32_USART3SW STM32_USART3SW_PCLK +#define STM32_UART4SW STM32_UART4SW_PCLK +#define STM32_UART5SW STM32_UART5SW_PCLK +#define STM32_I2C1SW STM32_I2C1SW_SYSCLK +#define STM32_I2C2SW STM32_I2C2SW_SYSCLK +#define STM32_TIM1SW STM32_TIM1SW_PCLK2 +#define STM32_TIM8SW STM32_TIM8SW_PCLK2 +#define STM32_RTCSEL STM32_RTCSEL_LSI +#define STM32_USB_CLOCK_REQUIRED TRUE +#define STM32_USBPRE STM32_USBPRE_DIV1P5 + +/* + * IRQ system settings. + */ +#define STM32_IRQ_EXTI0_PRIORITY 6 +#define STM32_IRQ_EXTI1_PRIORITY 6 +#define STM32_IRQ_EXTI2_PRIORITY 6 +#define STM32_IRQ_EXTI3_PRIORITY 6 +#define STM32_IRQ_EXTI4_PRIORITY 6 +#define STM32_IRQ_EXTI5_9_PRIORITY 6 +#define STM32_IRQ_EXTI10_15_PRIORITY 6 +#define STM32_IRQ_EXTI16_PRIORITY 6 +#define STM32_IRQ_EXTI17_PRIORITY 15 +#define STM32_IRQ_EXTI18_PRIORITY 6 +#define STM32_IRQ_EXTI19_PRIORITY 15 +#define STM32_IRQ_EXTI20_PRIORITY 15 +#define STM32_IRQ_EXTI21_22_29_PRIORITY 6 +#define STM32_IRQ_EXTI30_32_PRIORITY 6 +#define STM32_IRQ_EXTI33_PRIORITY 6 +#define STM32_IRQ_TIM1_BRK_TIM15_PRIORITY 7 +#define STM32_IRQ_TIM1_UP_TIM16_PRIORITY 7 +#define STM32_IRQ_TIM1_TRGCO_TIM17_PRIORITY 7 +#define STM32_IRQ_TIM1_CC_PRIORITY 7 + +/* + * ADC driver system settings. + */ +#define STM32_ADC_DUAL_MODE FALSE +#define STM32_ADC_COMPACT_SAMPLES FALSE +#define STM32_ADC_USE_ADC1 FALSE +#define STM32_ADC_USE_ADC2 FALSE +#define STM32_ADC_USE_ADC3 FALSE +#define STM32_ADC_USE_ADC4 FALSE +#define STM32_ADC_ADC1_DMA_STREAM STM32_DMA_STREAM_ID(1, 1) +#define STM32_ADC_ADC2_DMA_STREAM STM32_DMA_STREAM_ID(2, 1) +#define STM32_ADC_ADC3_DMA_STREAM STM32_DMA_STREAM_ID(2, 5) +#define STM32_ADC_ADC4_DMA_STREAM STM32_DMA_STREAM_ID(2, 2) +#define STM32_ADC_ADC1_DMA_PRIORITY 2 +#define STM32_ADC_ADC2_DMA_PRIORITY 2 +#define STM32_ADC_ADC3_DMA_PRIORITY 2 +#define STM32_ADC_ADC4_DMA_PRIORITY 2 +#define STM32_ADC_ADC12_IRQ_PRIORITY 5 +#define STM32_ADC_ADC3_IRQ_PRIORITY 5 +#define STM32_ADC_ADC4_IRQ_PRIORITY 5 +#define STM32_ADC_ADC1_DMA_IRQ_PRIORITY 5 +#define STM32_ADC_ADC2_DMA_IRQ_PRIORITY 5 +#define STM32_ADC_ADC3_DMA_IRQ_PRIORITY 5 +#define STM32_ADC_ADC4_DMA_IRQ_PRIORITY 5 +#define STM32_ADC_ADC12_CLOCK_MODE ADC_CCR_CKMODE_AHB_DIV1 +#define STM32_ADC_ADC34_CLOCK_MODE ADC_CCR_CKMODE_AHB_DIV1 + +/* + * CAN driver system settings. + */ +#define STM32_CAN_USE_CAN1 FALSE +#define STM32_CAN_CAN1_IRQ_PRIORITY 11 + +/* + * DAC driver system settings. + */ +#define STM32_DAC_DUAL_MODE FALSE +#define STM32_DAC_USE_DAC1_CH1 TRUE +#define STM32_DAC_USE_DAC1_CH2 TRUE +#define STM32_DAC_DAC1_CH1_IRQ_PRIORITY 10 +#define STM32_DAC_DAC1_CH2_IRQ_PRIORITY 10 +#define STM32_DAC_DAC1_CH1_DMA_PRIORITY 2 +#define STM32_DAC_DAC1_CH2_DMA_PRIORITY 2 + +/* + * GPT driver system settings. + */ +#define STM32_GPT_USE_TIM1 FALSE +#define STM32_GPT_USE_TIM2 FALSE +#define STM32_GPT_USE_TIM3 FALSE +#define STM32_GPT_USE_TIM4 FALSE +#define STM32_GPT_USE_TIM6 TRUE +#define STM32_GPT_USE_TIM7 TRUE +#define STM32_GPT_USE_TIM8 TRUE +#define STM32_GPT_USE_TIM15 FALSE +#define STM32_GPT_USE_TIM16 FALSE +#define STM32_GPT_USE_TIM17 FALSE +#define STM32_GPT_TIM1_IRQ_PRIORITY 7 +#define STM32_GPT_TIM2_IRQ_PRIORITY 7 +#define STM32_GPT_TIM3_IRQ_PRIORITY 7 +#define STM32_GPT_TIM4_IRQ_PRIORITY 7 +#define STM32_GPT_TIM6_IRQ_PRIORITY 7 +#define STM32_GPT_TIM7_IRQ_PRIORITY 7 +#define STM32_GPT_TIM8_IRQ_PRIORITY 7 + +/* + * I2C driver system settings. + */ +#define STM32_I2C_USE_I2C1 TRUE +#define STM32_I2C_USE_I2C2 FALSE +#define STM32_I2C_BUSY_TIMEOUT 50 +#define STM32_I2C_I2C1_IRQ_PRIORITY 10 +#define STM32_I2C_I2C2_IRQ_PRIORITY 10 +#define STM32_I2C_USE_DMA TRUE +#define STM32_I2C_I2C1_DMA_PRIORITY 1 +#define STM32_I2C_I2C2_DMA_PRIORITY 1 +#define STM32_I2C_DMA_ERROR_HOOK(i2cp) osalSysHalt("DMA failure") + +/* + * ICU driver system settings. + */ +#define STM32_ICU_USE_TIM1 FALSE +#define STM32_ICU_USE_TIM2 FALSE +#define STM32_ICU_USE_TIM3 FALSE +#define STM32_ICU_USE_TIM4 FALSE +#define STM32_ICU_USE_TIM8 FALSE +#define STM32_ICU_USE_TIM15 FALSE +#define STM32_ICU_TIM1_IRQ_PRIORITY 7 +#define STM32_ICU_TIM2_IRQ_PRIORITY 7 +#define STM32_ICU_TIM3_IRQ_PRIORITY 7 +#define STM32_ICU_TIM4_IRQ_PRIORITY 7 +#define STM32_ICU_TIM8_IRQ_PRIORITY 7 + +/* + * PWM driver system settings. + */ +#define STM32_PWM_USE_ADVANCED FALSE +#define STM32_PWM_USE_TIM1 FALSE +#define STM32_PWM_USE_TIM2 FALSE +#define STM32_PWM_USE_TIM3 TRUE +#define STM32_PWM_USE_TIM4 TRUE +#define STM32_PWM_USE_TIM8 FALSE +#define STM32_PWM_USE_TIM15 FALSE +#define STM32_PWM_USE_TIM16 FALSE +#define STM32_PWM_USE_TIM17 FALSE +#define STM32_PWM_TIM1_IRQ_PRIORITY 7 +#define STM32_PWM_TIM2_IRQ_PRIORITY 7 +#define STM32_PWM_TIM3_IRQ_PRIORITY 7 +#define STM32_PWM_TIM4_IRQ_PRIORITY 7 +#define STM32_PWM_TIM8_IRQ_PRIORITY 7 + +/* + * RTC driver system settings. + */ +#define STM32_RTC_PRESA_VALUE 32 +#define STM32_RTC_PRESS_VALUE 1024 +#define STM32_RTC_CR_INIT 0 +#define STM32_RTC_TAMPCR_INIT 0 + +/* + * SERIAL driver system settings. + */ +#define STM32_SERIAL_USE_USART1 FALSE +#define STM32_SERIAL_USE_USART2 TRUE +#define STM32_SERIAL_USE_USART3 FALSE +#define STM32_SERIAL_USE_UART4 FALSE +#define STM32_SERIAL_USE_UART5 FALSE +#define STM32_SERIAL_USART1_PRIORITY 12 +#define STM32_SERIAL_USART2_PRIORITY 12 +#define STM32_SERIAL_USART3_PRIORITY 12 +#define STM32_SERIAL_UART4_PRIORITY 12 +#define STM32_SERIAL_UART5_PRIORITY 12 + +/* + * SPI driver system settings. + */ +#define STM32_SPI_USE_SPI1 FALSE +#define STM32_SPI_USE_SPI2 TRUE +#define STM32_SPI_USE_SPI3 FALSE +#define STM32_SPI_SPI1_DMA_PRIORITY 1 +#define STM32_SPI_SPI2_DMA_PRIORITY 1 +#define STM32_SPI_SPI3_DMA_PRIORITY 1 +#define STM32_SPI_SPI1_IRQ_PRIORITY 10 +#define STM32_SPI_SPI2_IRQ_PRIORITY 10 +#define STM32_SPI_SPI3_IRQ_PRIORITY 10 +#define STM32_SPI_DMA_ERROR_HOOK(spip) osalSysHalt("DMA failure") + +/* + * ST driver system settings. + */ +#define STM32_ST_IRQ_PRIORITY 8 +#define STM32_ST_USE_TIMER 2 + +/* + * UART driver system settings. + */ +#define STM32_UART_USE_USART1 FALSE +#define STM32_UART_USE_USART2 FALSE +#define STM32_UART_USE_USART3 FALSE +#define STM32_UART_USART1_IRQ_PRIORITY 12 +#define STM32_UART_USART2_IRQ_PRIORITY 12 +#define STM32_UART_USART3_IRQ_PRIORITY 12 +#define STM32_UART_USART1_DMA_PRIORITY 0 +#define STM32_UART_USART2_DMA_PRIORITY 0 +#define STM32_UART_USART3_DMA_PRIORITY 0 +#define STM32_UART_DMA_ERROR_HOOK(uartp) osalSysHalt("DMA failure") + +/* + * USB driver system settings. + */ +#define STM32_USB_USE_USB1 TRUE +#define STM32_USB_LOW_POWER_ON_SUSPEND FALSE +#define STM32_USB_USB1_HP_IRQ_PRIORITY 13 +#define STM32_USB_USB1_LP_IRQ_PRIORITY 14 + +/* + * WDG driver system settings. + */ +#define STM32_WDG_USE_IWDG FALSE + +#endif /* MCUCONF_H */ diff --git a/platforms/chibios/GENERIC_STM32_F303XC/configs/proton_c.mk b/platforms/chibios/GENERIC_STM32_F303XC/configs/proton_c.mk new file mode 100644 index 0000000000..23907c810a --- /dev/null +++ b/platforms/chibios/GENERIC_STM32_F303XC/configs/proton_c.mk @@ -0,0 +1,9 @@ +# Proton C MCU settings for converting AVR projects +MCU = STM32F303 + +# These are defaults based on what has been implemented for ARM boards +AUDIO_ENABLE = yes +WS2812_DRIVER = bitbang + +# Force task driven PWM until ARM can provide automatic configuration +BACKLIGHT_DRIVER = software diff --git a/drivers/boards/IC_TEENSY_3_1/board.c b/platforms/chibios/IC_TEENSY_3_1/board/board.c index 63e3f64929..63e3f64929 100644 --- a/drivers/boards/IC_TEENSY_3_1/board.c +++ b/platforms/chibios/IC_TEENSY_3_1/board/board.c diff --git a/drivers/boards/IC_TEENSY_3_1/board.h b/platforms/chibios/IC_TEENSY_3_1/board/board.h index c8259ab0c7..c8259ab0c7 100644 --- a/drivers/boards/IC_TEENSY_3_1/board.h +++ b/platforms/chibios/IC_TEENSY_3_1/board/board.h diff --git a/platforms/chibios/IC_TEENSY_3_1/board/board.mk b/platforms/chibios/IC_TEENSY_3_1/board/board.mk new file mode 100644 index 0000000000..842e335905 --- /dev/null +++ b/platforms/chibios/IC_TEENSY_3_1/board/board.mk @@ -0,0 +1,9 @@ +# List of all the board related files. +BOARDSRC = $(BOARD_PATH)/board/board.c + +# Required include directories +BOARDINC = $(BOARD_PATH)/board + +# Shared variables +ALLCSRC += $(BOARDSRC) +ALLINC += $(BOARDINC) diff --git a/drivers/boards/STM32_F103_STM32DUINO/board.c b/platforms/chibios/STM32_F103_STM32DUINO/board/board.c index 8c5a87f35f..9135f61364 100644 --- a/drivers/boards/STM32_F103_STM32DUINO/board.c +++ b/platforms/chibios/STM32_F103_STM32DUINO/board/board.c @@ -35,12 +35,15 @@ const PALConfig pal_default_config = }; #endif +__attribute__((weak)) void enter_bootloader_mode_if_requested(void) {} + /* * Early initialization code. * This initialization must be performed just after stack setup and before * any other initialization. */ void __early_init(void) { + enter_bootloader_mode_if_requested(); stm32_clock_init(); } diff --git a/drivers/boards/STM32_F103_STM32DUINO/board.h b/platforms/chibios/STM32_F103_STM32DUINO/board/board.h index 09d182d6ca..09d182d6ca 100644 --- a/drivers/boards/STM32_F103_STM32DUINO/board.h +++ b/platforms/chibios/STM32_F103_STM32DUINO/board/board.h diff --git a/platforms/chibios/STM32_F103_STM32DUINO/board/board.mk b/platforms/chibios/STM32_F103_STM32DUINO/board/board.mk new file mode 100644 index 0000000000..842e335905 --- /dev/null +++ b/platforms/chibios/STM32_F103_STM32DUINO/board/board.mk @@ -0,0 +1,9 @@ +# List of all the board related files. +BOARDSRC = $(BOARD_PATH)/board/board.c + +# Required include directories +BOARDINC = $(BOARD_PATH)/board + +# Shared variables +ALLCSRC += $(BOARDSRC) +ALLINC += $(BOARDINC) diff --git a/platforms/chibios/keyboard-config-templates/board.h b/platforms/chibios/keyboard-config-templates/board.h new file mode 100644 index 0000000000..967ec13a1c --- /dev/null +++ b/platforms/chibios/keyboard-config-templates/board.h @@ -0,0 +1,20 @@ +/* Copyright 2020 Nick Brassel (tzarc) + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <https://www.gnu.org/licenses/>. + */ +#pragma once + +#include_next "board.h" + +// #undef STM32_HSE_BYPASS diff --git a/platforms/chibios/keyboard-config-templates/chconf.h b/platforms/chibios/keyboard-config-templates/chconf.h new file mode 100644 index 0000000000..7c2af93f5e --- /dev/null +++ b/platforms/chibios/keyboard-config-templates/chconf.h @@ -0,0 +1,20 @@ +/* Copyright 2020 Nick Brassel (tzarc) + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <https://www.gnu.org/licenses/>. + */ +#pragma once + +// #define CH_CFG_OPTIMIZE_SPEED TRUE + +#include_next "chconf.h" diff --git a/platforms/chibios/keyboard-config-templates/halconf.h b/platforms/chibios/keyboard-config-templates/halconf.h new file mode 100644 index 0000000000..ab5f738f97 --- /dev/null +++ b/platforms/chibios/keyboard-config-templates/halconf.h @@ -0,0 +1,20 @@ +/* Copyright 2020 Nick Brassel (tzarc) + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <https://www.gnu.org/licenses/>. + */ +#pragma once + +// #define HAL_USE_DAC TRUE + +#include_next "halconf.h" diff --git a/platforms/chibios/keyboard-config-templates/mcuconf.h b/platforms/chibios/keyboard-config-templates/mcuconf.h new file mode 100644 index 0000000000..5b42747b95 --- /dev/null +++ b/platforms/chibios/keyboard-config-templates/mcuconf.h @@ -0,0 +1,21 @@ +/* Copyright 2020 Nick Brassel (tzarc) + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <https://www.gnu.org/licenses/>. + */ +#pragma once + +#include_next "mcuconf.h" + +// #undef STM32_HSE_ENABLED +// #define STM32_HSE_ENABLED FALSE diff --git a/drivers/boards/ld/MKL26Z64.ld b/platforms/chibios/ld/MKL26Z64.ld index c4ca8b874c..c4ca8b874c 100644 --- a/drivers/boards/ld/MKL26Z64.ld +++ b/platforms/chibios/ld/MKL26Z64.ld diff --git a/drivers/boards/ld/STM32F103x8_stm32duino_bootloader.ld b/platforms/chibios/ld/STM32F103x8_stm32duino_bootloader.ld index d0688ef601..d0688ef601 100644 --- a/drivers/boards/ld/STM32F103x8_stm32duino_bootloader.ld +++ b/platforms/chibios/ld/STM32F103x8_stm32duino_bootloader.ld diff --git a/quantum/stm32/mcuconf.h b/quantum/stm32/mcuconf.h deleted file mode 100644 index 71994a98e0..0000000000 --- a/quantum/stm32/mcuconf.h +++ /dev/null @@ -1,273 +0,0 @@ -/* - ChibiOS - Copyright (C) 2006..2018 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -#ifndef MCUCONF_H -#define MCUCONF_H - -/* - * STM32F3xx drivers configuration. - * The following settings override the default settings present in - * the various device driver implementation headers. - * Note that the settings for each driver only have effect if the whole - * driver is enabled in halconf.h. - * - * IRQ priorities: - * 15...0 Lowest...Highest. - * - * DMA priorities: - * 0...3 Lowest...Highest. - */ - -#define STM32F3xx_MCUCONF -#define STM32F303_MCUCONF - -/* - * HAL driver system settings. - */ -#define STM32_NO_INIT FALSE -#define STM32_PVD_ENABLE FALSE -#define STM32_PLS STM32_PLS_LEV0 -#define STM32_HSI_ENABLED TRUE -#define STM32_LSI_ENABLED TRUE -#define STM32_HSE_ENABLED TRUE -#define STM32_LSE_ENABLED FALSE -#define STM32_SW STM32_SW_PLL -#define STM32_PLLSRC STM32_PLLSRC_HSE -#define STM32_PREDIV_VALUE 1 -#define STM32_PLLMUL_VALUE 9 -#define STM32_HPRE STM32_HPRE_DIV1 -#define STM32_PPRE1 STM32_PPRE1_DIV2 -#define STM32_PPRE2 STM32_PPRE2_DIV2 -#define STM32_MCOSEL STM32_MCOSEL_NOCLOCK -#define STM32_ADC12PRES STM32_ADC12PRES_DIV1 -#define STM32_ADC34PRES STM32_ADC34PRES_DIV1 -#define STM32_USART1SW STM32_USART1SW_PCLK -#define STM32_USART2SW STM32_USART2SW_PCLK -#define STM32_USART3SW STM32_USART3SW_PCLK -#define STM32_UART4SW STM32_UART4SW_PCLK -#define STM32_UART5SW STM32_UART5SW_PCLK -#define STM32_I2C1SW STM32_I2C1SW_SYSCLK -#define STM32_I2C2SW STM32_I2C2SW_SYSCLK -#define STM32_TIM1SW STM32_TIM1SW_PCLK2 -#define STM32_TIM8SW STM32_TIM8SW_PCLK2 -#define STM32_RTCSEL STM32_RTCSEL_LSI -#define STM32_USB_CLOCK_REQUIRED TRUE -#define STM32_USBPRE STM32_USBPRE_DIV1P5 - -/* - * IRQ system settings. - */ -#define STM32_IRQ_EXTI0_PRIORITY 6 -#define STM32_IRQ_EXTI1_PRIORITY 6 -#define STM32_IRQ_EXTI2_PRIORITY 6 -#define STM32_IRQ_EXTI3_PRIORITY 6 -#define STM32_IRQ_EXTI4_PRIORITY 6 -#define STM32_IRQ_EXTI5_9_PRIORITY 6 -#define STM32_IRQ_EXTI10_15_PRIORITY 6 -#define STM32_IRQ_EXTI16_PRIORITY 6 -#define STM32_IRQ_EXTI17_PRIORITY 15 -#define STM32_IRQ_EXTI18_PRIORITY 6 -#define STM32_IRQ_EXTI19_PRIORITY 15 -#define STM32_IRQ_EXTI20_PRIORITY 15 -#define STM32_IRQ_EXTI21_22_29_PRIORITY 6 -#define STM32_IRQ_EXTI30_32_PRIORITY 6 -#define STM32_IRQ_EXTI33_PRIORITY 6 -#define STM32_IRQ_TIM1_BRK_TIM15_PRIORITY 7 -#define STM32_IRQ_TIM1_UP_TIM16_PRIORITY 7 -#define STM32_IRQ_TIM1_TRGCO_TIM17_PRIORITY 7 -#define STM32_IRQ_TIM1_CC_PRIORITY 7 - -/* - * ADC driver system settings. - */ -#define STM32_ADC_DUAL_MODE FALSE -#define STM32_ADC_COMPACT_SAMPLES FALSE -#define STM32_ADC_USE_ADC1 FALSE -#define STM32_ADC_USE_ADC2 FALSE -#define STM32_ADC_USE_ADC3 FALSE -#define STM32_ADC_USE_ADC4 FALSE -#define STM32_ADC_ADC1_DMA_STREAM STM32_DMA_STREAM_ID(1, 1) -#define STM32_ADC_ADC2_DMA_STREAM STM32_DMA_STREAM_ID(2, 1) -#define STM32_ADC_ADC3_DMA_STREAM STM32_DMA_STREAM_ID(2, 5) -#define STM32_ADC_ADC4_DMA_STREAM STM32_DMA_STREAM_ID(2, 2) -#define STM32_ADC_ADC1_DMA_PRIORITY 2 -#define STM32_ADC_ADC2_DMA_PRIORITY 2 -#define STM32_ADC_ADC3_DMA_PRIORITY 2 -#define STM32_ADC_ADC4_DMA_PRIORITY 2 -#define STM32_ADC_ADC12_IRQ_PRIORITY 5 -#define STM32_ADC_ADC3_IRQ_PRIORITY 5 -#define STM32_ADC_ADC4_IRQ_PRIORITY 5 -#define STM32_ADC_ADC1_DMA_IRQ_PRIORITY 5 -#define STM32_ADC_ADC2_DMA_IRQ_PRIORITY 5 -#define STM32_ADC_ADC3_DMA_IRQ_PRIORITY 5 -#define STM32_ADC_ADC4_DMA_IRQ_PRIORITY 5 -#define STM32_ADC_ADC12_CLOCK_MODE ADC_CCR_CKMODE_AHB_DIV1 -#define STM32_ADC_ADC34_CLOCK_MODE ADC_CCR_CKMODE_AHB_DIV1 - -/* - * CAN driver system settings. - */ -#define STM32_CAN_USE_CAN1 FALSE -#define STM32_CAN_CAN1_IRQ_PRIORITY 11 - -/* - * DAC driver system settings. - */ -#define STM32_DAC_DUAL_MODE FALSE -#define STM32_DAC_USE_DAC1_CH1 TRUE -#define STM32_DAC_USE_DAC1_CH2 TRUE -#define STM32_DAC_DAC1_CH1_IRQ_PRIORITY 10 -#define STM32_DAC_DAC1_CH2_IRQ_PRIORITY 10 -#define STM32_DAC_DAC1_CH1_DMA_PRIORITY 2 -#define STM32_DAC_DAC1_CH2_DMA_PRIORITY 2 - -/* - * GPT driver system settings. - */ -#define STM32_GPT_USE_TIM1 FALSE -#define STM32_GPT_USE_TIM2 FALSE -#define STM32_GPT_USE_TIM3 FALSE -#define STM32_GPT_USE_TIM4 FALSE -#define STM32_GPT_USE_TIM6 TRUE -#define STM32_GPT_USE_TIM7 TRUE -#define STM32_GPT_USE_TIM8 TRUE -#define STM32_GPT_USE_TIM15 FALSE -#define STM32_GPT_USE_TIM16 FALSE -#define STM32_GPT_USE_TIM17 FALSE -#define STM32_GPT_TIM1_IRQ_PRIORITY 7 -#define STM32_GPT_TIM2_IRQ_PRIORITY 7 -#define STM32_GPT_TIM3_IRQ_PRIORITY 7 -#define STM32_GPT_TIM4_IRQ_PRIORITY 7 -#define STM32_GPT_TIM6_IRQ_PRIORITY 7 -#define STM32_GPT_TIM7_IRQ_PRIORITY 7 -#define STM32_GPT_TIM8_IRQ_PRIORITY 7 - -/* - * I2C driver system settings. - */ -#define STM32_I2C_USE_I2C1 TRUE -#define STM32_I2C_USE_I2C2 FALSE -#define STM32_I2C_BUSY_TIMEOUT 50 -#define STM32_I2C_I2C1_IRQ_PRIORITY 10 -#define STM32_I2C_I2C2_IRQ_PRIORITY 10 -#define STM32_I2C_USE_DMA TRUE -#define STM32_I2C_I2C1_DMA_PRIORITY 1 -#define STM32_I2C_I2C2_DMA_PRIORITY 1 -#define STM32_I2C_DMA_ERROR_HOOK(i2cp) osalSysHalt("DMA failure") - -/* - * ICU driver system settings. - */ -#define STM32_ICU_USE_TIM1 FALSE -#define STM32_ICU_USE_TIM2 FALSE -#define STM32_ICU_USE_TIM3 FALSE -#define STM32_ICU_USE_TIM4 FALSE -#define STM32_ICU_USE_TIM8 FALSE -#define STM32_ICU_USE_TIM15 FALSE -#define STM32_ICU_TIM1_IRQ_PRIORITY 7 -#define STM32_ICU_TIM2_IRQ_PRIORITY 7 -#define STM32_ICU_TIM3_IRQ_PRIORITY 7 -#define STM32_ICU_TIM4_IRQ_PRIORITY 7 -#define STM32_ICU_TIM8_IRQ_PRIORITY 7 - -/* - * PWM driver system settings. - */ -#define STM32_PWM_USE_ADVANCED FALSE -#define STM32_PWM_USE_TIM1 FALSE -#define STM32_PWM_USE_TIM2 FALSE -#define STM32_PWM_USE_TIM3 TRUE -#define STM32_PWM_USE_TIM4 TRUE -#define STM32_PWM_USE_TIM8 FALSE -#define STM32_PWM_USE_TIM15 FALSE -#define STM32_PWM_USE_TIM16 FALSE -#define STM32_PWM_USE_TIM17 FALSE -#define STM32_PWM_TIM1_IRQ_PRIORITY 7 -#define STM32_PWM_TIM2_IRQ_PRIORITY 7 -#define STM32_PWM_TIM3_IRQ_PRIORITY 7 -#define STM32_PWM_TIM4_IRQ_PRIORITY 7 -#define STM32_PWM_TIM8_IRQ_PRIORITY 7 - -/* - * RTC driver system settings. - */ -#define STM32_RTC_PRESA_VALUE 32 -#define STM32_RTC_PRESS_VALUE 1024 -#define STM32_RTC_CR_INIT 0 -#define STM32_RTC_TAMPCR_INIT 0 - -/* - * SERIAL driver system settings. - */ -#define STM32_SERIAL_USE_USART1 FALSE -#define STM32_SERIAL_USE_USART2 TRUE -#define STM32_SERIAL_USE_USART3 FALSE -#define STM32_SERIAL_USE_UART4 FALSE -#define STM32_SERIAL_USE_UART5 FALSE -#define STM32_SERIAL_USART1_PRIORITY 12 -#define STM32_SERIAL_USART2_PRIORITY 12 -#define STM32_SERIAL_USART3_PRIORITY 12 -#define STM32_SERIAL_UART4_PRIORITY 12 -#define STM32_SERIAL_UART5_PRIORITY 12 - -/* - * SPI driver system settings. - */ -#define STM32_SPI_USE_SPI1 FALSE -#define STM32_SPI_USE_SPI2 TRUE -#define STM32_SPI_USE_SPI3 FALSE -#define STM32_SPI_SPI1_DMA_PRIORITY 1 -#define STM32_SPI_SPI2_DMA_PRIORITY 1 -#define STM32_SPI_SPI3_DMA_PRIORITY 1 -#define STM32_SPI_SPI1_IRQ_PRIORITY 10 -#define STM32_SPI_SPI2_IRQ_PRIORITY 10 -#define STM32_SPI_SPI3_IRQ_PRIORITY 10 -#define STM32_SPI_DMA_ERROR_HOOK(spip) osalSysHalt("DMA failure") - -/* - * ST driver system settings. - */ -#define STM32_ST_IRQ_PRIORITY 8 -#define STM32_ST_USE_TIMER 2 - -/* - * UART driver system settings. - */ -#define STM32_UART_USE_USART1 FALSE -#define STM32_UART_USE_USART2 FALSE -#define STM32_UART_USE_USART3 FALSE -#define STM32_UART_USART1_IRQ_PRIORITY 12 -#define STM32_UART_USART2_IRQ_PRIORITY 12 -#define STM32_UART_USART3_IRQ_PRIORITY 12 -#define STM32_UART_USART1_DMA_PRIORITY 0 -#define STM32_UART_USART2_DMA_PRIORITY 0 -#define STM32_UART_USART3_DMA_PRIORITY 0 -#define STM32_UART_DMA_ERROR_HOOK(uartp) osalSysHalt("DMA failure") - -/* - * USB driver system settings. - */ -#define STM32_USB_USE_USB1 TRUE -#define STM32_USB_LOW_POWER_ON_SUSPEND FALSE -#define STM32_USB_USB1_HP_IRQ_PRIORITY 13 -#define STM32_USB_USB1_LP_IRQ_PRIORITY 14 - -/* - * WDG driver system settings. - */ -#define STM32_WDG_USE_IWDG FALSE - -#endif /* MCUCONF_H */ diff --git a/quantum/stm32/proton_c.mk b/quantum/stm32/proton_c.mk deleted file mode 100644 index b25b555045..0000000000 --- a/quantum/stm32/proton_c.mk +++ /dev/null @@ -1,47 +0,0 @@ -# Proton C MCU settings for converting AVR projects - -# These are defaults based on what has been implemented for ARM boards -AUDIO_ENABLE = yes -WS2812_DRIVER = bitbang - -# Force task driven PWM until ARM can provide automatic configuration -BACKLIGHT_DRIVER = software - -# The rest of these settings shouldn't change - -## chip/board settings -# - the next two should match the directories in -# <chibios>/os/hal/ports/$(MCU_FAMILY)/$(MCU_SERIES) -MCU_FAMILY = STM32 -MCU_SERIES = STM32F3xx - -# Linker script to use -# - it should exist either in <chibios>/os/common/ports/ARMCMx/compilers/GCC/ld/ -# or <this_dir>/ld/ -MCU_LDSCRIPT = STM32F303xC - -# Startup code to use -# - it should exist in <chibios>/os/common/startup/ARMCMx/compilers/GCC/mk/ -MCU_STARTUP = stm32f3xx - -# Board: it should exist either in <chibios>/os/hal/boards/ -# or <this_dir>/boards -BOARD = GENERIC_STM32_F303XC - -# Cortex version -MCU = cortex-m4 - -# ARM version, CORTEX-M0/M1 are 6, CORTEX-M3/M4/M7 are 7 -ARMV = 7 - -USE_FPU = yes - -# Vector table for application -# 0x00000000-0x00001000 area is occupied by bootlaoder.*/ -# The CORTEX_VTOR... is needed only for MCHCK/Infinity KB -# OPT_DEFS = -DCORTEX_VTOR_INIT=0x08005000 -OPT_DEFS = - -# Options to pass to dfu-util when flashing -DFU_ARGS = -d 0483:df11 -a 0 -s 0x08000000:leave -DFU_SUFFIX_ARGS = -p df11 -v 0483 diff --git a/tmk_core/chibios.mk b/tmk_core/chibios.mk index 09aaddeef0..4e8abc9be6 100644 --- a/tmk_core/chibios.mk +++ b/tmk_core/chibios.mk @@ -50,11 +50,42 @@ PLATFORM_MK = $(CHIBIOS_CONTRIB)/os/hal/ports/$(MCU_FAMILY)/$(MCU_SERIES)/$(PLAT endif include $(PLATFORM_MK) +BOARD_MK := + +ifneq ("$(wildcard $(KEYBOARD_PATH_5)/boards/$(BOARD)/board.mk)","") + BOARD_PATH = $(KEYBOARD_PATH_5) + BOARD_MK += $(KEYBOARD_PATH_5)/boards/$(BOARD)/board.mk +else ifneq ("$(wildcard $(KEYBOARD_PATH_4)/boards/$(BOARD)/board.mk)","") + BOARD_PATH = $(KEYBOARD_PATH_4) + BOARD_MK += $(KEYBOARD_PATH_4)/boards/$(BOARD)/board.mk +else ifneq ("$(wildcard $(KEYBOARD_PATH_3)/boards/$(BOARD)/board.mk)","") + BOARD_PATH = $(KEYBOARD_PATH_3) + BOARD_MK += $(KEYBOARD_PATH_3)/boards/$(BOARD)/board.mk +else ifneq ("$(wildcard $(KEYBOARD_PATH_2)/boards/$(BOARD)/board.mk)","") + BOARD_PATH = $(KEYBOARD_PATH_2) + BOARD_MK += $(KEYBOARD_PATH_2)/boards/$(BOARD)/board.mk +else ifneq ("$(wildcard $(KEYBOARD_PATH_1)/boards/$(BOARD)/board.mk)","") + BOARD_PATH = $(KEYBOARD_PATH_1) + BOARD_MK += $(KEYBOARD_PATH_1)/boards/$(BOARD)/board.mk +else ifneq ("$(wildcard $(TOP_DIR)/platforms/chibios/$(BOARD)/board/board.mk)","") + BOARD_PATH = $(TOP_DIR)/platforms/chibios/$(BOARD) + BOARD_MK += $(TOP_DIR)/platforms/chibios/$(BOARD)/board/board.mk + KEYBOARD_PATHS += $(BOARD_PATH)/configs +endif + +ifeq ("$(wildcard $(BOARD_MK))","") + BOARD_MK = $(CHIBIOS)/os/hal/boards/$(BOARD)/board.mk + ifeq ("$(wildcard $(BOARD_MK))","") + BOARD_MK = $(CHIBIOS_CONTRIB)/os/hal/boards/$(BOARD)/board.mk + endif +endif + # Bootloader address ifdef STM32_BOOTLOADER_ADDRESS OPT_DEFS += -DSTM32_BOOTLOADER_ADDRESS=$(STM32_BOOTLOADER_ADDRESS) endif +# Work out if we need to set up the include for the bootloader definitions ifneq ("$(wildcard $(KEYBOARD_PATH_5)/bootloader_defs.h)","") OPT_DEFS += -include $(KEYBOARD_PATH_5)/bootloader_defs.h else ifneq ("$(wildcard $(KEYBOARD_PATH_5)/boards/$(BOARD)/bootloader_defs.h)","") @@ -75,38 +106,52 @@ else ifneq ("$(wildcard $(KEYBOARD_PATH_1)/bootloader_defs.h)","") OPT_DEFS += -include $(KEYBOARD_PATH_1)/bootloader_defs.h else ifneq ("$(wildcard $(KEYBOARD_PATH_1)/boards/$(BOARD)/bootloader_defs.h)","") OPT_DEFS += -include $(KEYBOARD_PATH_1)/boards/$(BOARD)/bootloader_defs.h -else ifneq ("$(wildcard $(TOP_DIR)/drivers/boards/$(BOARD)/bootloader_defs.h)","") - OPT_DEFS += -include $(TOP_DIR)/drivers/boards/$(BOARD)/bootloader_defs.h +else ifneq ("$(wildcard $(BOARD_PATH)/configs/bootloader_defs.h)","") + OPT_DEFS += -include $(BOARD_PATH)/configs/bootloader_defs.h endif -BOARD_MK := +# Work out the config file directories +ifneq ("$(wildcard $(KEYBOARD_PATH_5)/chconf.h)","") + CHCONFDIR = $(KEYBOARD_PATH_5) +else ifneq ("$(wildcard $(KEYBOARD_PATH_4)/chconf.h)","") + CHCONFDIR = $(KEYBOARD_PATH_4) +else ifneq ("$(wildcard $(KEYBOARD_PATH_3)/chconf.h)","") + CHCONFDIR = $(KEYBOARD_PATH_3) +else ifneq ("$(wildcard $(KEYBOARD_PATH_2)/chconf.h)","") + CHCONFDIR = $(KEYBOARD_PATH_2) +else ifneq ("$(wildcard $(KEYBOARD_PATH_1)/chconf.h)","") + CHCONFDIR = $(KEYBOARD_PATH_1) +else ifneq ("$(wildcard $(TOP_DIR)/platforms/chibios/$(BOARD)/configs/chconf.h)","") + CHCONFDIR = $(TOP_DIR)/platforms/chibios/$(BOARD)/configs +endif -ifneq ("$(wildcard $(KEYBOARD_PATH_5)/boards/$(BOARD)/board.mk)","") - BOARD_PATH = $(KEYBOARD_PATH_5) - BOARD_MK += $(KEYBOARD_PATH_5)/boards/$(BOARD)/board.mk -else ifneq ("$(wildcard $(KEYBOARD_PATH_4)/boards/$(BOARD)/board.mk)","") - BOARD_PATH = $(KEYBOARD_PATH_4) - BOARD_MK += $(KEYBOARD_PATH_4)/boards/$(BOARD)/board.mk -else ifneq ("$(wildcard $(KEYBOARD_PATH_3)/boards/$(BOARD)/board.mk)","") - BOARD_PATH = $(KEYBOARD_PATH_3) - BOARD_MK += $(KEYBOARD_PATH_3)/boards/$(BOARD)/board.mk -else ifneq ("$(wildcard $(KEYBOARD_PATH_2)/boards/$(BOARD)/board.mk)","") - BOARD_PATH = $(KEYBOARD_PATH_2) - BOARD_MK += $(KEYBOARD_PATH_2)/boards/$(BOARD)/board.mk -else ifneq ("$(wildcard $(KEYBOARD_PATH_1)/boards/$(BOARD)/board.mk)","") - BOARD_PATH = $(KEYBOARD_PATH_1) - BOARD_MK += $(KEYBOARD_PATH_1)/boards/$(BOARD)/board.mk -else ifneq ("$(wildcard $(TOP_DIR)/drivers/boards/$(BOARD)/board.mk)","") - BOARD_PATH = $(TOP_DIR)/drivers - BOARD_MK += $(TOP_DIR)/drivers/boards/$(BOARD)/board.mk +ifneq ("$(wildcard $(KEYBOARD_PATH_5)/halconf.h)","") + HALCONFDIR = $(KEYBOARD_PATH_5) +else ifneq ("$(wildcard $(KEYBOARD_PATH_4)/halconf.h)","") + HALCONFDIR = $(KEYBOARD_PATH_4) +else ifneq ("$(wildcard $(KEYBOARD_PATH_3)/halconf.h)","") + HALCONFDIR = $(KEYBOARD_PATH_3) +else ifneq ("$(wildcard $(KEYBOARD_PATH_2)/halconf.h)","") + HALCONFDIR = $(KEYBOARD_PATH_2) +else ifneq ("$(wildcard $(KEYBOARD_PATH_1)/halconf.h)","") + HALCONFDIR = $(KEYBOARD_PATH_1) +else ifneq ("$(wildcard $(TOP_DIR)/platforms/chibios/$(BOARD)/configs/halconf.h)","") + HALCONFDIR = $(TOP_DIR)/platforms/chibios/$(BOARD)/configs endif -ifeq ("$(wildcard $(BOARD_MK))","") - BOARD_MK = $(CHIBIOS)/os/hal/boards/$(BOARD)/board.mk - ifeq ("$(wildcard $(BOARD_MK))","") - BOARD_MK = $(CHIBIOS_CONTRIB)/os/hal/boards/$(BOARD)/board.mk - endif +# HAL-OSAL files (optional). +include $(CHIBIOS)/os/hal/hal.mk + +ifeq ("$(PLATFORM_NAME)","") + PLATFORM_NAME = platform +endif + +PLATFORM_MK = $(CHIBIOS)/os/hal/ports/$(MCU_FAMILY)/$(MCU_SERIES)/$(PLATFORM_NAME).mk +ifeq ("$(wildcard $(PLATFORM_MK))","") +PLATFORM_MK = $(CHIBIOS_CONTRIB)/os/hal/ports/$(MCU_FAMILY)/$(MCU_SERIES)/$(PLATFORM_NAME).mk endif +include $(PLATFORM_MK) + include $(BOARD_MK) -include $(CHIBIOS)/os/hal/osal/rt/osal.mk # ChibiOS <= 19.x @@ -138,8 +183,8 @@ else ifneq ("$(wildcard $(KEYBOARD_PATH_2)/ld/$(MCU_LDSCRIPT).ld)","") LDSCRIPT = $(KEYBOARD_PATH_2)/ld/$(MCU_LDSCRIPT).ld else ifneq ("$(wildcard $(KEYBOARD_PATH_1)/ld/$(MCU_LDSCRIPT).ld)","") LDSCRIPT = $(KEYBOARD_PATH_1)/ld/$(MCU_LDSCRIPT).ld -else ifneq ("$(wildcard $(TOP_DIR)/drivers/boards/ld/$(MCU_LDSCRIPT).ld)","") - LDSCRIPT = $(TOP_DIR)/drivers/boards/ld/$(MCU_LDSCRIPT).ld +else ifneq ("$(wildcard $(TOP_DIR)/platforms/chibios/ld/$(MCU_LDSCRIPT).ld)","") + LDSCRIPT = $(TOP_DIR)/platforms/chibios/ld/$(MCU_LDSCRIPT).ld else ifneq ("$(wildcard $(STARTUPLD_CONTRIB)/$(MCU_LDSCRIPT).ld)","") LDSCRIPT = $(STARTUPLD_CONTRIB)/$(MCU_LDSCRIPT).ld USE_CHIBIOS_CONTRIB = yes @@ -163,6 +208,7 @@ QUANTUM_LIB_SRC += $(STARTUPASM) $(PORTASM) $(OSALASM) CHIBISRC := $(patsubst $(TOP_DIR)/%,%,$(CHIBISRC)) EXTRAINCDIRS += $(CHIBIOS)/os/license $(CHIBIOS)/os/oslib/include \ + $(TOP_DIR)/platforms/chibios/$(BOARD)/configs \ $(STARTUPINC) $(KERNINC) $(PORTINC) $(OSALINC) \ $(HALINC) $(PLATFORMINC) $(BOARDINC) $(TESTINC) \ $(STREAMSINC) $(CHIBIOS)/os/various $(COMMON_VPATH) @@ -182,6 +228,8 @@ else ifneq ("$(wildcard $(KEYBOARD_PATH_2)/halconf_community.h)","") USE_CHIBIOS_CONTRIB = yes else ifneq ("$(wildcard $(KEYBOARD_PATH_1)/halconf_community.h)","") USE_CHIBIOS_CONTRIB = yes +else ifneq ("$(wildcard $(TOP_DIR)/platforms/chibios/$(BOARD)/configs/halconf_community.h)","") + USE_CHIBIOS_CONTRIB = yes endif ifeq ($(strip $(USE_CHIBIOS_CONTRIB)),yes) @@ -194,6 +242,15 @@ endif # Project, sources and paths ############################################################################## +############################################################################## +# Injected configs +# +ifneq ("$(wildcard $(BOARD_PATH)/configs/config.h)","") + CONFIG_H += $(BOARD_PATH)/configs/config.h +endif +ifneq ("$(wildcard $(BOARD_PATH)/configs/post_config.h)","") + POST_CONFIG_H += $(BOARD_PATH)/configs/post_config.h +endif ############################################################################## # Compiler settings diff --git a/util/chibios-upgrader.sh b/util/chibios-upgrader.sh index 2174da3cf1..ebc12abe7d 100755 --- a/util/chibios-upgrader.sh +++ b/util/chibios-upgrader.sh @@ -38,7 +38,11 @@ find_chibi_files() { local search_path="$1" shift local conditions=( "$@" ) - find -L "$search_path" -not -path '*/lib/chibios*' -and -not -path '*/lib/ugfx*' -and -not -path '*/util/*' -and \( "${conditions[@]}" \) | sort + for file in $(find -L "$search_path" -not -path '*/lib/chibios*' -and -not -path '*/lib/ugfx*' -and -not -path '*/util/*' -and \( "${conditions[@]}" \) | sort) ; do + if [ -z "$(grep 'include_next' "$file")" ] ; then + echo $file + fi + done } revert_chibi_files() { diff --git a/util/travis_compiled_push.sh b/util/travis_compiled_push.sh index 68f6d5c114..195a87208b 100755 --- a/util/travis_compiled_push.sh +++ b/util/travis_compiled_push.sh @@ -13,7 +13,7 @@ if [[ "$TRAVIS_BRANCH" == "master" && "$TRAVIS_PULL_REQUEST" == "false" ]] ; the # fix formatting git checkout master git diff --diff-filter=AM --name-only -n 1 -z ${TRAVIS_COMMIT_RANGE} | xargs -0 dos2unix -git diff --diff-filter=AM --name-only -n 1 -z ${TRAVIS_COMMIT_RANGE} '*.c' '*.h' '*.cpp' | grep -z -e '^drivers' -e '^quantum' -e '^tests' -e '^tmk_core' | grep -zv -e 'quantum/template' -e 'tmk_core/protocol/usb_hid' | xargs -0 clang-format-7 -i +git diff --diff-filter=AM --name-only -n 1 -z ${TRAVIS_COMMIT_RANGE} '*.c' '*.h' '*.cpp' | grep -z -e '^drivers' -e '^quantum' -e '^tests' -e '^tmk_core' | grep -zv -e 'quantum/template' -e 'tmk_core/protocol/usb_hid' -e 'platforms/chibios' | xargs -0 clang-format-7 -i git diff --diff-filter=AM --name-only -n 1 -z ${TRAVIS_COMMIT_RANGE} | xargs -0 git add git commit -m "format code according to conventions [skip ci]" && git push git@github.com:qmk/qmk_firmware.git master |