summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
-rw-r--r--keyboards/hecomi/alpha/config.h23
-rw-r--r--keyboards/hecomi/alpha/rules.mk6
-rw-r--r--keyboards/hecomi/config.h246
-rw-r--r--keyboards/hecomi/keymaps/default/keymap.c23
4 files changed, 35 insertions, 263 deletions
diff --git a/keyboards/hecomi/alpha/config.h b/keyboards/hecomi/alpha/config.h
index 40bb8c2f05..8a65f146b0 100644
--- a/keyboards/hecomi/alpha/config.h
+++ b/keyboards/hecomi/alpha/config.h
@@ -45,7 +45,7 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
#define MATRIX_ROW_PINS { C6,D7,E6,B4,B5 }
#define MATRIX_COL_PINS { F4,F5,F6,F7,B1,B3,B2,B6 }
#define UNUSED_PINS
-#define SOFT_SERIAL_PIN D0 // or D1, D2, D3, E6
+#define SOFT_SERIAL_PIN D1 // or D1, D2, D3, E6
//#define USE_I2C
/* COL2ROW, ROW2COL, or CUSTOM_MATRIX */
@@ -62,20 +62,20 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
#define RGB_DI_PIN D4
#ifdef RGB_DI_PIN
- #define RGBLED_NUM 8
+ #define RGBLED_NUM 16
#define RGBLIGHT_HUE_STEP 8
#define RGBLIGHT_SAT_STEP 8
#define RGBLIGHT_VAL_STEP 8
/*== or choose animations ==*/
- #define RGBLIGHT_EFFECT_BREATHING
- #define RGBLIGHT_EFFECT_RAINBOW_MOOD
- #define RGBLIGHT_EFFECT_RAINBOW_SWIRL
- #define RGBLIGHT_EFFECT_SNAKE
- #define RGBLIGHT_EFFECT_KNIGHT
- #define RGBLIGHT_EFFECT_CHRISTMAS
- #define RGBLIGHT_EFFECT_STATIC_GRADIENT
- #define RGBLIGHT_EFFECT_RGB_TEST
- #define RGBLIGHT_EFFECT_ALTERNATING
+// #define RGBLIGHT_EFFECT_BREATHING
+// #define RGBLIGHT_EFFECT_RAINBOW_MOOD
+// #define RGBLIGHT_EFFECT_RAINBOW_SWIRL
+// #define RGBLIGHT_EFFECT_SNAKE
+// #define RGBLIGHT_EFFECT_KNIGHT
+// #define RGBLIGHT_EFFECT_CHRISTMAS
+// #define RGBLIGHT_EFFECT_STATIC_GRADIENT
+// #define RGBLIGHT_EFFECT_RGB_TEST
+// #define RGBLIGHT_EFFECT_ALTERNATING
#endif
/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
@@ -244,3 +244,4 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
#define MASTER_LEFT
#define EEHANDS
*/
+#define RGBLED_SPLIT {8,8}
diff --git a/keyboards/hecomi/alpha/rules.mk b/keyboards/hecomi/alpha/rules.mk
index ae9192be37..3e726f1d6c 100644
--- a/keyboards/hecomi/alpha/rules.mk
+++ b/keyboards/hecomi/alpha/rules.mk
@@ -62,8 +62,8 @@ BOOTLOADER = caterina
# Build Options
# change yes to no to disable
#
-BOOTMAGIC_ENABLE = yes # Virtual DIP switch configuration(+1000)
-MOUSEKEY_ENABLE = yes # Mouse keys(+4700)
+BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration(+1000)
+MOUSEKEY_ENABLE = no # Mouse keys(+4700)
EXTRAKEY_ENABLE = yes # Audio control and System control(+450)
CONSOLE_ENABLE = yes # Console for debug(+400)
COMMAND_ENABLE = yes # Commands for debug and configuration
@@ -72,7 +72,7 @@ SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend
# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
NKRO_ENABLE = no # USB Nkey Rollover
BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality on B7 by default
-RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow
+RGBLIGHT_ENABLE = yes # Enable keyboard RGB underglow
MIDI_ENABLE = no # MIDI support (+2400 to 4200, depending on config)
UNICODE_ENABLE = no # Unicode
BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID
diff --git a/keyboards/hecomi/config.h b/keyboards/hecomi/config.h
deleted file mode 100644
index 40bb8c2f05..0000000000
--- a/keyboards/hecomi/config.h
+++ /dev/null
@@ -1,246 +0,0 @@
-/*
-Copyright 2018 takashiski
-
-This program is free software: you can redistribute it and/or modify
-it under the terms of the GNU General Public License as published by
-the Free Software Foundation, either version 2 of the License, or
-(at your option) any later version.
-
-This program is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-GNU General Public License for more details.
-
-You should have received a copy of the GNU General Public License
-along with this program. If not, see <http://www.gnu.org/licenses/>.
-*/
-
-#pragma once
-
-#include "config_common.h"
-
-/* USB Device descriptor parameter */
-#define VENDOR_ID 0xFEED
-#define PRODUCT_ID 0x0000
-#define DEVICE_VER 0x0001
-#define MANUFACTURER takashiski
-#define PRODUCT hecomi_alpha
-#define DESCRIPTION asymmetric split keyboard
-
-/* key matrix size */
-//#define MATRIX_ROWS 5
-#define MATRIX_ROWS 10
-#define MATRIX_COLS 8
-
-/*
- * Keyboard Matrix Assignments
- *
- * Change this to how you wired your keyboard
- * COLS: AVR pins used for columns, left to right
- * ROWS: AVR pins used for rows, top to bottom
- * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
- * ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
- *
-*/
-#define MATRIX_ROW_PINS { C6,D7,E6,B4,B5 }
-#define MATRIX_COL_PINS { F4,F5,F6,F7,B1,B3,B2,B6 }
-#define UNUSED_PINS
-#define SOFT_SERIAL_PIN D0 // or D1, D2, D3, E6
-//#define USE_I2C
-
-/* COL2ROW, ROW2COL, or CUSTOM_MATRIX */
-#define DIODE_DIRECTION COL2ROW
-
-/*
- * Split Keyboard specific options, make sure you have 'SPLIT_KEYBOARD = yes' in your rules.mk, an3 define SOFT_SERIAL_PIN.
- */
-//#define SOFT_SERIAL_PIN D0 // or D1, D2, D3, E6
-
-// #define BACKLIGHT_PIN B7
-// #define BACKLIGHT_BREATHING
-// #define BACKLIGHT_LEVELS 3
-
- #define RGB_DI_PIN D4
- #ifdef RGB_DI_PIN
- #define RGBLED_NUM 8
- #define RGBLIGHT_HUE_STEP 8
- #define RGBLIGHT_SAT_STEP 8
- #define RGBLIGHT_VAL_STEP 8
- /*== or choose animations ==*/
- #define RGBLIGHT_EFFECT_BREATHING
- #define RGBLIGHT_EFFECT_RAINBOW_MOOD
- #define RGBLIGHT_EFFECT_RAINBOW_SWIRL
- #define RGBLIGHT_EFFECT_SNAKE
- #define RGBLIGHT_EFFECT_KNIGHT
- #define RGBLIGHT_EFFECT_CHRISTMAS
- #define RGBLIGHT_EFFECT_STATIC_GRADIENT
- #define RGBLIGHT_EFFECT_RGB_TEST
- #define RGBLIGHT_EFFECT_ALTERNATING
- #endif
-
-/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
-#define DEBOUNCING_DELAY 5
-
-/* define if matrix has ghost (lacks anti-ghosting diodes) */
-//#define MATRIX_HAS_GHOST
-
-/* number of backlight levels */
-
-/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
-#define LOCKING_SUPPORT_ENABLE
-/* Locking resynchronize hack */
-#define LOCKING_RESYNC_ENABLE
-
-/* If defined, GRAVE_ESC will always act as ESC when CTRL is held.
- * This is userful for the Windows task manager shortcut (ctrl+shift+esc).
- */
-// #define GRAVE_ESC_CTRL_OVERRIDE
-
-/*
- * Force NKRO
- *
- * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
- * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
- * makefile for this to work.)
- *
- * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
- * until the next keyboard reset.
- *
- * NKRO may prevent your keystrokes from being detected in the BIOS, but it is
- * fully operational during normal computer usage.
- *
- * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
- * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
- * bootmagic, NKRO mode will always be enabled until it is toggled again during a
- * power-up.
- *
- */
-//#define FORCE_NKRO
-
-/*
- * Magic Key Options
- *
- * Magic keys are hotkey commands that allow control over firmware functions of
- * the keyboard. They are best used in combination with the HID Listen program,
- * found here: https://www.pjrc.com/teensy/hid_listen.html
- *
- * The options below allow the magic key functionality to be changed. This is
- * useful if your keyboard/keypad is missing keys and you want magic key support.
- *
- */
-
-
-/* control how magic key switches layers */
-//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS true
-//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS true
-//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM false
-
-/* override magic key keymap */
-//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS
-//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS
-//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM
-//#define MAGIC_KEY_HELP1 H
-//#define MAGIC_KEY_HELP2 SLASH
-//#define MAGIC_KEY_DEBUG D
-//#define MAGIC_KEY_DEBUG_MATRIX X
-//#define MAGIC_KEY_DEBUG_KBD K
-//#define MAGIC_KEY_DEBUG_MOUSE M
-//#define MAGIC_KEY_VERSION V
-//#define MAGIC_KEY_STATUS S
-//#define MAGIC_KEY_CONSOLE C
-//#define MAGIC_KEY_LAYER0_ALT1 ESC
-//#define MAGIC_KEY_LAYER0_ALT2 GRAVE
-//#define MAGIC_KEY_LAYER0 0
-//#define MAGIC_KEY_LAYER1 1
-//#define MAGIC_KEY_LAYER2 2
-//#define MAGIC_KEY_LAYER3 3
-//#define MAGIC_KEY_LAYER4 4
-//#define MAGIC_KEY_LAYER5 5
-//#define MAGIC_KEY_LAYER6 6
-//#define MAGIC_KEY_LAYER7 7
-//#define MAGIC_KEY_LAYER8 8
-//#define MAGIC_KEY_LAYER9 9
-//#define MAGIC_KEY_BOOTLOADER PAUSE
-//#define MAGIC_KEY_LOCK CAPS
-//#define MAGIC_KEY_EEPROM E
-//#define MAGIC_KEY_NKRO N
-//#define MAGIC_KEY_SLEEP_LED Z
-
-/*
- * Feature disable options
- * These options are also useful to firmware size reduction.
- */
-
-/* disable debug print */
-//#define NO_DEBUG
-
-/* disable print */
-//#define NO_PRINT
-
-/* disable action features */
-//#define NO_ACTION_LAYER
-//#define NO_ACTION_TAPPING
-//#define NO_ACTION_ONESHOT
-//#define NO_ACTION_MACRO
-//#define NO_ACTION_FUNCTION
-
-/*
- * MIDI options
- */
-
-/* Prevent use of disabled MIDI features in the keymap */
-//#define MIDI_ENABLE_STRICT 1
-
-/* enable basic MIDI features:
- - MIDI notes can be sent when in Music mode is on
-*/
-//#define MIDI_BASIC
-
-/* enable advanced MIDI features:
- - MIDI notes can be added to the keymap
- - Octave shift and transpose
- - Virtual sustain, portamento, and modulation wheel
- - etc.
-*/
-//#define MIDI_ADVANCED
-
-/* override number of MIDI tone keycodes (each octave adds 12 keycodes and allocates 12 bytes) */
-//#define MIDI_TONE_KEYCODE_OCTAVES 1
-
-/*
- * HD44780 LCD Display Configuration
- */
-/*
-#define LCD_LINES 2 //< number of visible lines of the display
-#define LCD_DISP_LENGTH 16 //< visibles characters per line of the display
-
-#define LCD_IO_MODE 1 //< 0: memory mapped mode, 1: IO port mode
-
-#if LCD_IO_MODE
-#define LCD_PORT PORTB //< port for the LCD lines
-#define LCD_DATA0_PORT LCD_PORT //< port for 4bit data bit 0
-#define LCD_DATA1_PORT LCD_PORT //< port for 4bit data bit 1
-#define LCD_DATA2_PORT LCD_PORT //< port for 4bit data bit 2
-#define LCD_DATA3_PORT LCD_PORT //< port for 4bit data bit 3
-#define LCD_DATA0_PIN 4 //< pin for 4bit data bit 0
-#define LCD_DATA1_PIN 5 //< pin for 4bit data bit 1
-#define LCD_DATA2_PIN 6 //< pin for 4bit data bit 2
-#define LCD_DATA3_PIN 7 //< pin for 4bit data bit 3
-#define LCD_RS_PORT LCD_PORT //< port for RS line
-#define LCD_RS_PIN 3 //< pin for RS line
-#define LCD_RW_PORT LCD_PORT //< port for RW line
-#define LCD_RW_PIN 2 //< pin for RW line
-#define LCD_E_PORT LCD_PORT //< port for Enable line
-#define LCD_E_PIN 1 //< pin for Enable line
-#endif
-*/
-
-/* Bootmagic Lite key configuration */
-// #define BOOTMAGIC_LITE_ROW 0
-// #define BOOTMAGIC_LITE_COLUMN 0
-//
-/*
-#define USE_I2C
-#define MASTER_LEFT
-#define EEHANDS
-*/
diff --git a/keyboards/hecomi/keymaps/default/keymap.c b/keyboards/hecomi/keymaps/default/keymap.c
index 25bddb7df2..505966fbeb 100644
--- a/keyboards/hecomi/keymaps/default/keymap.c
+++ b/keyboards/hecomi/keymaps/default/keymap.c
@@ -39,15 +39,15 @@ enum layers{
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
[DF]=LAYOUT(\
KC_ESC,KC_1,KC_2,KC_3,KC_4,KC_5,KC_6, KC_7,KC_8,KC_9,KC_0,KC_MINS,KC_EQL,KC_NUHS,KC_GRV,\
- KC_TAB ,KC_Q,KC_W,KC_E,KC_R,KC_T,KC_Y, KC_Y,KC_U,KC_I,KC_O,KC_P,KC_LBRC,KC_RBRC,KC_DEL,\
+ KC_TAB ,KC_Q,KC_W,KC_E,KC_R,KC_T,KC_Y, KC_Y,KC_U,KC_I,KC_O,KC_P,KC_LBRC,KC_RBRC,KC_BSPC,\
KC_LCTRL ,KC_A,KC_S,KC_D,KC_F,KC_G, KC_H,KC_J,KC_K,KC_L,KC_SCLN,KC_QUOT,KC_ENT,\
KC_LSFT ,KC_Z,KC_X,KC_C,KC_V,KC_B, KC_B,KC_N,KC_M,KC_COMM,KC_DOT,KC_SLSH,KC_RSFT,KC_FN,\
KC_LCTRL,KC_LGUI,KC_LALT,KC_MHEN,KC_BSPC,KC_SPC, KC_ENT,KC_ESC,KC_HENK,KC_RALT,KC_RGUI,KC_RCTRL\
),
[FN]=LAYOUT(\
KC_ESC,KC_F1,KC_F2,KC_F3,KC_F4,KC_F5,KC_F6, KC_F7,KC_F8,KC_F9,KC_F10,KC_F11,KC_F12,KC_INS,KC_DEL,\
- KC_TAB ,KC_Q,KC_W,KC_E,KC_R,KC_T,KC_Y, KC_Y,KC_U,KC_PSCR,KC_SLCK,KC_PAUSE,KC_UP,KC_RBRC,KC_BSPC,\
- KC_CAPS ,KC_A,KC_S,KC_D,KC_F,KC_G, KC_SFT(KC_8),KC_SLSH,KC_HOME,KC_PGUP,KC_LEFT,KC_RIGHT,KC_ENT,\
+ KC_TAB ,KC_9,KC_7,KC_5,KC_3,KC_1,KC_Y, KC_Y,KC_U,KC_PSCR,KC_SLCK,KC_PAUSE,KC_UP,KC_RBRC,KC_BSPC,\
+ KC_CAPS ,KC_8,KC_6,KC_4,KC_2,KC_0, KC_SFT(KC_8),KC_SLSH,KC_HOME,KC_PGUP,KC_LEFT,KC_RIGHT,KC_ENT,\
KC_LSFT ,KC_Z,KC_X,KC_C,KC_V,KC_B, KC_B,KC_SFT(KC_EQL),KC_MINS,KC_END,KC_PGDN,KC_DOWN,KC_RSFT,KC_TRNS,\
KC_LCTRL,KC_LGUI,KC_LALT,KC_MHEN,KC_BSPC,KC_SPC, KC_ENT,KC_ESC,KC_HENK,KC_RALT,KC_RGUI,KC_RCTRL\
),
@@ -75,6 +75,23 @@ bool process_record_user(uint16_t keycode, keyrecord_t *record) {
return true;
}
+uint32_t layer_state_set_user(uint32_t state)
+{
+ uint8_t layer=biton32(state);
+ switch(layer)
+ {
+ case DF:
+ rgblight_sethsv_noeeprom(180,255,255);
+ break;
+ case FN:
+ rgblight_sethsv_noeeprom(0,255,255);
+ break;
+ default:
+ break;
+ }
+ return state;
+}
+
void matrix_init_user(void) {
}