Enable SLEEP_LED on ATmega32A (#8531)

* Port over some AVR backlight logic to SLEEP_LED

* Port over some AVR backlight logic to SLEEP_LED - add timer 3

* Port over some AVR backlight logic to SLEEP_LED - clang format

* Enable SLEEP_LED within vusb protocol

2 files changed, 44 insertions, 9 deletions

diff --git a/tmk_core/common/avr/sleep_led.c b/tmk_core/common/avr/sleep_led.c
index 61fa70dc3e..63dcc2afd9 100644
--- a/tmk_core/common/avr/sleep_led.c
+++ b/tmk_core/common/avr/sleep_led.c
@@ -5,6 +5,30 @@
 #include "led.h"
 #include "sleep_led.h"
 
+#ifndef SLEEP_LED_TIMER
+#    define SLEEP_LED_TIMER 1
+#endif
+
+#if SLEEP_LED_TIMER == 1
+#    define TCCRxB TCCR1B
+#    define TIMERx_COMPA_vect TIMER1_COMPA_vect
+#    if defined(__AVR_ATmega32A__)  // This MCU has only one TIMSK register
+#        define TIMSKx TIMSK
+#    else
+#        define TIMSKx TIMSK1
+#    endif
+#    define OCIExA OCIE1A
+#    define OCRxx OCR1A
+#elif SLEEP_LED_TIMER == 3
+#    define TCCRxB TCCR3B
+#    define TIMERx_COMPA_vect TIMER3_COMPA_vect
+#    define TIMSKx TIMSK3
+#    define OCIExA OCIE3A
+#    define OCRxx OCR3A
+#else
+error("Invalid SLEEP_LED_TIMER config")
+#endif
+
 /* Software PWM
  *  ______           ______           __
  * |  ON  |___OFF___|  ON  |___OFF___|   ....
@@ -25,15 +49,14 @@
 void sleep_led_init(void) {
     /* Timer1 setup */
     /* CTC mode */
-    TCCR1B |= _BV(WGM12);
+    TCCRxB |= _BV(WGM12);
     /* Clock selelct: clk/1 */
-    TCCR1B |= _BV(CS10);
+    TCCRxB |= _BV(CS10);
     /* Set TOP value */
     uint8_t sreg = SREG;
     cli();
-    OCR1AH = (SLEEP_LED_TIMER_TOP >> 8) & 0xff;
-    OCR1AL = SLEEP_LED_TIMER_TOP & 0xff;
-    SREG   = sreg;
+    OCRxx = SLEEP_LED_TIMER_TOP;
+    SREG  = sreg;
 }
 
 /** \brief Sleep LED enable
@@ -42,7 +65,7 @@ void sleep_led_init(void) {
  */
 void sleep_led_enable(void) {
     /* Enable Compare Match Interrupt */
-    TIMSK1 |= _BV(OCIE1A);
+    TIMSKx |= _BV(OCIExA);
 }
 
 /** \brief Sleep LED disable
@@ -51,7 +74,7 @@ void sleep_led_enable(void) {
  */
 void sleep_led_disable(void) {
     /* Disable Compare Match Interrupt */
-    TIMSK1 &= ~_BV(OCIE1A);
+    TIMSKx &= ~_BV(OCIExA);
 }
 
 /** \brief Sleep LED toggle
@@ -60,7 +83,7 @@ void sleep_led_disable(void) {
  */
 void sleep_led_toggle(void) {
     /* Disable Compare Match Interrupt */
-    TIMSK1 ^= _BV(OCIE1A);
+    TIMSKx ^= _BV(OCIExA);
 }
 
 /** \brief Breathing Sleep LED brighness(PWM On period) table
@@ -72,7 +95,7 @@ void sleep_led_toggle(void) {
  */
 static const uint8_t breathing_table[64] PROGMEM = {0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 2, 4, 6, 10, 15, 23, 32, 44, 58, 74, 93, 113, 135, 157, 179, 199, 218, 233, 245, 252, 255, 252, 245, 233, 218, 199, 179, 157, 135, 113, 93, 74, 58, 44, 32, 23, 15, 10, 6, 4, 2, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0};
 
-ISR(TIMER1_COMPA_vect) {
+ISR(TIMERx_COMPA_vect) {
     /* Software PWM
      * timer:1111 1111 1111 1111
      *       \_____/\/ \_______/____  count(0-255)
diff --git a/tmk_core/protocol/vusb/main.c b/tmk_core/protocol/vusb/main.c
index 068c4d8f3d..219989876c 100644
--- a/tmk_core/protocol/vusb/main.c
+++ b/tmk_core/protocol/vusb/main.c
@@ -20,6 +20,9 @@
 #include "timer.h"
 #include "uart.h"
 #include "debug.h"
+#ifdef SLEEP_LED_ENABLE
+#    include "sleep_led.h"
+#endif
 
 #define UART_BAUD_RATE 115200
 
@@ -59,6 +62,9 @@ int main(void) {
     initForUsbConnectivity();
 
     keyboard_init();
+#ifdef SLEEP_LED_ENABLE
+    sleep_led_init();
+#endif
 
     debug("main loop\n");
     while (1) {
@@ -67,10 +73,16 @@ int main(void) {
             suspended   = false;
             usbSofCount = 0;
             last_timer  = timer_read();
+#    ifdef SLEEP_LED_ENABLE
+            sleep_led_disable();
+#    endif
         } else {
             // Suspend when no SOF in 3ms-10ms(7.1.7.4 Suspending of USB1.1)
             if (timer_elapsed(last_timer) > 5) {
                 suspended = true;
+#    ifdef SLEEP_LED_ENABLE
+                sleep_led_enable();
+#    endif
                 /*
                                 uart_putchar('S');
                                 _delay_ms(1);