diff options
| author | Ryan <fauxpark@gmail.com> | 2020-04-06 08:25:07 +1000 |
|---|---|---|
| committer | GitHub <noreply@github.com> | 2020-04-05 23:25:07 +0100 |
| commit | ca91dc594bb011f06f2e13018e74b6fd91c07c84 (patch) | |
| tree | 732a967fd58c648e0552439f835ab8a594ccf028 /tmk_core/protocol/vusb/usbconfig.h | |
| parent | 26cb83b8c04029f8882f5d3f537c520dde17126e (diff) | |
V-USB: Remove some stuff from usbconfig.h that should not be configurable (#8656)
* V-USB: Remove some stuff from usbconfig.h that should not be configurable
* Clean up some ifdefs
* And some more
* Even more
Diffstat (limited to 'tmk_core/protocol/vusb/usbconfig.h')
| -rw-r--r-- | tmk_core/protocol/vusb/usbconfig.h | 22 |
1 files changed, 0 insertions, 22 deletions
diff --git a/tmk_core/protocol/vusb/usbconfig.h b/tmk_core/protocol/vusb/usbconfig.h index f156163510..f118dc8ede 100644 --- a/tmk_core/protocol/vusb/usbconfig.h +++ b/tmk_core/protocol/vusb/usbconfig.h @@ -41,15 +41,6 @@ section at the end of this file). * interrupt, the USB interrupt will also be triggered at Start-Of-Frame * markers every millisecond.] */ -#define USB_CFG_CLOCK_KHZ (F_CPU/1000) -/* Clock rate of the AVR in kHz. Legal values are 12000, 12800, 15000, 16000, - * 16500, 18000 and 20000. The 12.8 MHz and 16.5 MHz versions of the code - * require no crystal, they tolerate +/- 1% deviation from the nominal - * frequency. All other rates require a precision of 2000 ppm and thus a - * crystal! - * Since F_CPU should be defined to your actual clock rate anyway, you should - * not need to modify this setting. - */ #define USB_CFG_CHECK_CRC 0 /* Define this to 1 if you want that the driver checks integrity of incoming * data packets (CRC checks). CRC checks cost quite a bit of code size and are @@ -227,19 +218,6 @@ section at the end of this file). * with libusb: 0x16c0/0x5dc. Use this VID/PID pair ONLY if you understand * the implications! */ -#define USB_CFG_DEVICE_CLASS 0 -#define USB_CFG_DEVICE_SUBCLASS 0 -/* See USB specification if you want to conform to an existing device class. - * Class 0xff is "vendor specific". - */ -#define USB_CFG_INTERFACE_CLASS 3 /* HID */ -#define USB_CFG_INTERFACE_SUBCLASS 1 /* Boot */ -#define USB_CFG_INTERFACE_PROTOCOL 1 /* Keyboard */ -/* See USB specification if you want to conform to an existing device class or - * protocol. The following classes must be set at interface level: - * HID class is 3, no subclass and protocol required (but may be useful!) - * CDC class is 2, use subclass 2 and protocol 1 for ACM - */ #define USB_CFG_HID_REPORT_DESCRIPTOR_LENGTH 0 /* Define this to the length of the HID report descriptor, if you implement * an HID device. Otherwise don't define it or define it to 0. |