Move USB Host Shield and Arduino core to `lib/` (#13973)

1 files changed, 0 insertions, 88 deletions

diff --git a/tmk_core/protocol/usb_hid/USB_Host_Shield_2.0/examples/pl2303/pl2303_gps/pl2303_gps.ino b/tmk_core/protocol/usb_hid/USB_Host_Shield_2.0/examples/pl2303/pl2303_gps/pl2303_gps.ino
deleted file mode 100644
index e8c8a02230..0000000000
--- a/tmk_core/protocol/usb_hid/USB_Host_Shield_2.0/examples/pl2303/pl2303_gps/pl2303_gps.ino
+++ /dev/null
@@ -1,88 +0,0 @@
-/* USB Host to PL2303-based USB GPS unit interface */
-/* Navibee GM720 receiver - Sirf Star III */
-/* USB support */
-#include <usbhub.h>
-/* CDC support */
-#include <cdcacm.h>
-#include <cdcprolific.h>
-
-// Satisfy the IDE, which needs to see the include statment in the ino too.
-#ifdef dobogusinclude
-#include <spi4teensy3.h>
-#include <SPI.h>
-#endif
-
-class PLAsyncOper : public CDCAsyncOper {
-public:
-        uint8_t OnInit(ACM *pacm);
-};
-
-uint8_t PLAsyncOper::OnInit(ACM *pacm) {
-        uint8_t rcode;
-
-        // Set DTR = 1
-        rcode = pacm->SetControlLineState(1);
-
-        if(rcode) {
-                ErrorMessage<uint8_t>(PSTR("SetControlLineState"), rcode);
-                return rcode;
-        }
-
-        LINE_CODING lc;
-        lc.dwDTERate = 4800; //default serial speed of GPS unit
-        lc.bCharFormat = 0;
-        lc.bParityType = 0;
-        lc.bDataBits = 8;
-
-        rcode = pacm->SetLineCoding(&lc);
-
-        if(rcode)
-                ErrorMessage<uint8_t>(PSTR("SetLineCoding"), rcode);
-
-        return rcode;
-}
-
-USB Usb;
-USBHub Hub(&Usb);
-PLAsyncOper AsyncOper;
-PL2303 Pl(&Usb, &AsyncOper);
-uint32_t read_delay;
-#define READ_DELAY 100
-
-void setup() {
-        Serial.begin(115200);
-#if !defined(__MIPSEL__)
-        while (!Serial); // Wait for serial port to connect - used on Leonardo, Teensy and other boards with built-in USB CDC serial connection
-#endif
-        Serial.println("Start");
-
-        if(Usb.Init() == -1)
-                Serial.println("OSCOKIRQ failed to assert");
-
-        delay(200);
-}
-
-void loop() {
-        uint8_t rcode;
-        uint8_t buf[64]; //serial buffer equals Max.packet size of bulk-IN endpoint
-        uint16_t rcvd = 64;
-
-        Usb.Task();
-
-        if(Pl.isReady()) {
-                /* reading the GPS */
-                if((long)(millis() - read_delay) >= 0L) {
-                        read_delay += READ_DELAY;
-                        rcode = Pl.RcvData(&rcvd, buf);
-                        if(rcode && rcode != hrNAK)
-                                ErrorMessage<uint8_t>(PSTR("Ret"), rcode);
-                        if(rcvd) { //more than zero bytes received
-                                for(uint16_t i = 0; i < rcvd; i++) {
-                                        Serial.print((char)buf[i]); //printing on the screen
-                                }//for( uint16_t i=0; i < rcvd; i++...
-                        }//if( rcvd
-                }//if( read_delay > millis()...
-        }//if( Usb.getUsbTaskState() == USB_STATE_RUNNING..
-}
-
-