Move USB Host Shield and Arduino core to `lib/` (#13973)

1 files changed, 0 insertions, 282 deletions

diff --git a/tmk_core/protocol/usb_hid/USB_Host_Shield_2.0/address.h b/tmk_core/protocol/usb_hid/USB_Host_Shield_2.0/address.h
deleted file mode 100644
index c3e1b3141f..0000000000
--- a/tmk_core/protocol/usb_hid/USB_Host_Shield_2.0/address.h
+++ /dev/null
@@ -1,282 +0,0 @@
-/* Copyright (C) 2011 Circuits At Home, LTD. All rights reserved.
-
-This software may be distributed and modified under the terms of the GNU
-General Public License version 2 (GPL2) as published by the Free Software
-Foundation and appearing in the file GPL2.TXT included in the packaging of
-this file. Please note that GPL2 Section 2[b] requires that all works based
-on this software must also be made publicly available under the terms of
-the GPL2 ("Copyleft").
-
-Contact information
--------------------
-
-Circuits At Home, LTD
-Web      :  http://www.circuitsathome.com
-e-mail   :  support@circuitsathome.com
- */
-
-#if !defined(_usb_h_) || defined(__ADDRESS_H__)
-#error "Never include address.h directly; include Usb.h instead"
-#else
-#define __ADDRESS_H__
-
-
-
-/* NAK powers. To save space in endpoint data structure, amount of retries before giving up and returning 0x4 is stored in */
-/* bmNakPower as a power of 2. The actual nak_limit is then calculated as nak_limit = ( 2^bmNakPower - 1) */
-#define USB_NAK_MAX_POWER               15              //NAK binary order maximum value
-#define USB_NAK_DEFAULT                 14              //default 32K-1 NAKs before giving up
-#define USB_NAK_NOWAIT                  1               //Single NAK stops transfer
-#define USB_NAK_NONAK                   0               //Do not count NAKs, stop retrying after USB Timeout
-
-struct EpInfo {
-        uint8_t epAddr; // Endpoint address
-        uint8_t maxPktSize; // Maximum packet size
-
-        union {
-                uint8_t epAttribs;
-
-                struct {
-                        uint8_t bmSndToggle : 1; // Send toggle, when zero bmSNDTOG0, bmSNDTOG1 otherwise
-                        uint8_t bmRcvToggle : 1; // Send toggle, when zero bmRCVTOG0, bmRCVTOG1 otherwise
-                        uint8_t bmNakPower : 6; // Binary order for NAK_LIMIT value
-                } __attribute__((packed));
-        };
-} __attribute__((packed));
-
-//        7   6   5   4   3   2   1   0
-//  ---------------------------------
-//  |   | H | P | P | P | A | A | A |
-//  ---------------------------------
-//
-// H - if 1 the address is a hub address
-// P - parent hub address
-// A - device address / port number in case of hub
-//
-
-struct UsbDeviceAddress {
-
-        union {
-
-                struct {
-                        uint8_t bmAddress : 3; // device address/port number
-                        uint8_t bmParent : 3; // parent hub address
-                        uint8_t bmHub : 1; // hub flag
-                        uint8_t bmReserved : 1; // reserved, must be zero
-                } __attribute__((packed));
-                uint8_t devAddress;
-        };
-} __attribute__((packed));
-
-#define bmUSB_DEV_ADDR_ADDRESS          0x07
-#define bmUSB_DEV_ADDR_PARENT           0x38
-#define bmUSB_DEV_ADDR_HUB              0x40
-
-struct UsbDevice {
-        EpInfo *epinfo; // endpoint info pointer
-        UsbDeviceAddress address;
-        uint8_t epcount; // number of endpoints
-        bool lowspeed; // indicates if a device is the low speed one
-        //      uint8_t devclass; // device class
-} __attribute__((packed));
-
-class AddressPool {
-public:
-        virtual UsbDevice* GetUsbDevicePtr(uint8_t addr) = 0;
-        virtual uint8_t AllocAddress(uint8_t parent, bool is_hub = false, uint8_t port = 0) = 0;
-        virtual void FreeAddress(uint8_t addr) = 0;
-};
-
-typedef void (*UsbDeviceHandleFunc)(UsbDevice *pdev);
-
-#define ADDR_ERROR_INVALID_INDEX                0xFF
-#define ADDR_ERROR_INVALID_ADDRESS              0xFF
-
-template <const uint8_t MAX_DEVICES_ALLOWED>
-class AddressPoolImpl : public AddressPool {
-        EpInfo dev0ep; //Endpoint data structure used during enumeration for uninitialized device
-
-        uint8_t hubCounter; // hub counter is kept
-        // in order to avoid hub address duplication
-
-        UsbDevice thePool[MAX_DEVICES_ALLOWED];
-
-        // Initializes address pool entry
-
-        void InitEntry(uint8_t index) {
-                thePool[index].address.devAddress = 0;
-                thePool[index].epcount = 1;
-                thePool[index].lowspeed = 0;
-                thePool[index].epinfo = &dev0ep;
-        };
-
-        // Returns thePool index for a given address
-
-        uint8_t FindAddressIndex(uint8_t address = 0) {
-                for(uint8_t i = 1; i < MAX_DEVICES_ALLOWED; i++) {
-                        if(thePool[i].address.devAddress == address)
-                                return i;
-                }
-                return 0;
-        };
-
-        // Returns thePool child index for a given parent
-
-        uint8_t FindChildIndex(UsbDeviceAddress addr, uint8_t start = 1) {
-                for(uint8_t i = (start < 1 || start >= MAX_DEVICES_ALLOWED) ? 1 : start; i < MAX_DEVICES_ALLOWED; i++) {
-                        if(thePool[i].address.bmParent == addr.bmAddress)
-                                return i;
-                }
-                return 0;
-        };
-
-        // Frees address entry specified by index parameter
-
-        void FreeAddressByIndex(uint8_t index) {
-                // Zero field is reserved and should not be affected
-                if(index == 0)
-                        return;
-
-                UsbDeviceAddress uda = thePool[index].address;
-                // If a hub was switched off all port addresses should be freed
-                if(uda.bmHub == 1) {
-                        for(uint8_t i = 1; (i = FindChildIndex(uda, i));)
-                                FreeAddressByIndex(i);
-
-                        // If the hub had the last allocated address, hubCounter should be decremented
-                        if(hubCounter == uda.bmAddress)
-                                hubCounter--;
-                }
-                InitEntry(index);
-        }
-
-        // Initializes the whole address pool at once
-
-        void InitAllAddresses() {
-                for(uint8_t i = 1; i < MAX_DEVICES_ALLOWED; i++)
-                        InitEntry(i);
-
-                hubCounter = 0;
-        };
-
-public:
-
-        AddressPoolImpl() : hubCounter(0) {
-                // Zero address is reserved
-                InitEntry(0);
-
-                thePool[0].address.devAddress = 0;
-                thePool[0].epinfo = &dev0ep;
-                dev0ep.epAddr = 0;
-                dev0ep.maxPktSize = 8;
-                dev0ep.epAttribs = 0; //set DATA0/1 toggles to 0
-                dev0ep.bmNakPower = USB_NAK_MAX_POWER;
-
-                InitAllAddresses();
-        };
-
-        // Returns a pointer to a specified address entry
-
-        virtual UsbDevice* GetUsbDevicePtr(uint8_t addr) {
-                if(!addr)
-                        return thePool;
-
-                uint8_t index = FindAddressIndex(addr);
-
-                return (!index) ? NULL : thePool + index;
-        };
-
-        // Performs an operation specified by pfunc for each addressed device
-
-        void ForEachUsbDevice(UsbDeviceHandleFunc pfunc) {
-                if(!pfunc)
-                        return;
-
-                for(uint8_t i = 1; i < MAX_DEVICES_ALLOWED; i++)
-                        if(thePool[i].address.devAddress)
-                                pfunc(thePool + i);
-        };
-
-        // Allocates new address
-
-        virtual uint8_t AllocAddress(uint8_t parent, bool is_hub = false, uint8_t port = 0) {
-                /* if (parent != 0 && port == 0)
-                        USB_HOST_SERIAL.println("PRT:0"); */
-                UsbDeviceAddress _parent;
-                _parent.devAddress = parent;
-                if(_parent.bmReserved || port > 7)
-                        //if(parent > 127 || port > 7)
-                        return 0;
-
-                if(is_hub && hubCounter == 7)
-                        return 0;
-
-                // finds first empty address entry starting from one
-                uint8_t index = FindAddressIndex(0);
-
-                if(!index) // if empty entry is not found
-                        return 0;
-
-                if(_parent.devAddress == 0) {
-                        if(is_hub) {
-                                thePool[index].address.devAddress = 0x41;
-                                hubCounter++;
-                        } else
-                                thePool[index].address.devAddress = 1;
-
-                        return thePool[index].address.devAddress;
-                }
-
-                UsbDeviceAddress addr;
-                addr.devAddress = 0; // Ensure all bits are zero
-                addr.bmParent = _parent.bmAddress;
-                if(is_hub) {
-                        addr.bmHub = 1;
-                        addr.bmAddress = ++hubCounter;
-                } else {
-                        addr.bmHub = 0;
-                        addr.bmAddress = port;
-                }
-                thePool[index].address = addr;
-                /*
-                                USB_HOST_SERIAL.print("Addr:");
-                                USB_HOST_SERIAL.print(addr.bmHub, HEX);
-                                USB_HOST_SERIAL.print(".");
-                                USB_HOST_SERIAL.print(addr.bmParent, HEX);
-                                USB_HOST_SERIAL.print(".");
-                                USB_HOST_SERIAL.println(addr.bmAddress, HEX);
-                 */
-                return thePool[index].address.devAddress;
-        };
-
-        // Empties pool entry
-
-        virtual void FreeAddress(uint8_t addr) {
-                // if the root hub is disconnected all the addresses should be initialized
-                if(addr == 0x41) {
-                        InitAllAddresses();
-                        return;
-                }
-                uint8_t index = FindAddressIndex(addr);
-                FreeAddressByIndex(index);
-        };
-
-        // Returns number of hubs attached
-        // It can be rather helpfull to find out if there are hubs attached than getting the exact number of hubs.
-        //uint8_t GetNumHubs()
-        //{
-        //        return hubCounter;
-        //};
-        //uint8_t GetNumDevices()
-        //{
-        //        uint8_t counter = 0;
-
-        //        for (uint8_t i=1; i<MAX_DEVICES_ALLOWED; i++)
-        //                if (thePool[i].address != 0);
-        //                        counter ++;
-
-        //        return counter;
-        //};
-};
-
-#endif // __ADDRESS_H__