Merge remote-tracking branch 'upstream/master'

* upstream/master: (1239 commits)
  Update ez.c
  removes planck/rev3 temporarily
  Move hand_swap_config to ez.c, removes error for infinity
  Update Makefile
  ergodox: Update algernon's keymap to v1.9
  Added VS Code dir to .gitignore
  Support the Pegasus Hoof controller.
  [Jack & Erez] Simplifies and documents TO
  add readme
  use wait_ms instead of _delay_ms
  add messenger
  init keymap
  Add example keymap
  Adding whiskey_tango_foxtrot_capslock ergodox keymap
  Unicode map framework. Allow unicode up to 0xFFFFF using separate mapping table
  CIE 1931 dim curve
  Apply the dim curve to the RGB output
  Update the Cluecard readme files
  Tune snake and knight intervals for Cluecard
  Tunable RGB light intervals
  ...

29 files changed, 3088 insertions, 3088 deletions

diff --git a/tmk_core/protocol/lufa/LUFA-git/LUFA/Build/HID_EEPROM_Loader/makefile b/tmk_core/protocol/lufa/LUFA-git/LUFA/Build/HID_EEPROM_Loader/makefile
index 9fd188c936..e839ba6b1d 100644
--- a/tmk_core/protocol/lufa/LUFA-git/LUFA/Build/HID_EEPROM_Loader/makefile
+++ b/tmk_core/protocol/lufa/LUFA-git/LUFA/Build/HID_EEPROM_Loader/makefile
@@ -1,42 +1,42 @@
-#

-#             LUFA Library

-#     Copyright (C) Dean Camera, 2014.

-#

-#  dean [at] fourwalledcubicle [dot] com

-#           www.lufa-lib.org

-#

-# --------------------------------------

-#         LUFA Project Makefile.

-# --------------------------------------

-

-# Run "make help" for target help.

-

-MCU          = at90usb1287

-ARCH         = AVR8

-F_CPU        = 1000000

-F_USB        = $(F_CPU)

-OPTIMIZATION = s

-TARGET       = HID_EEPROM_Loader

-SRC          = $(TARGET).c

-LUFA_PATH    = ../../../LUFA

-CC_FLAGS     =

-LD_FLAGS     =

-OBJECT_FILES = InputEEData.o

-

-# Default target

-all:

-

-# Determine the AVR sub-architecture of the build main application object file

-FIND_AVR_SUBARCH = avr$(shell avr-objdump -f $(TARGET).o | grep architecture | cut -d':' -f3 | cut -d',' -f1)

-

-# Create a linkable object file with the input binary EEPROM data stored in the FLASH section

-InputEEData.o: InputEEData.bin $(TARGET).o $(MAKEFILE_LIST)

-	@echo $(MSG_OBJCPY_CMD) Converting \"$<\" to a object file \"$@\"

-	avr-objcopy -I binary -O elf32-avr -B $(call FIND_AVR_SUBARCH) --rename-section .data=.progmem.data,contents,alloc,readonly,data $< $@

-

-# Include LUFA build script makefiles

-include $(LUFA_PATH)/Build/lufa_core.mk

-include $(LUFA_PATH)/Build/lufa_build.mk

-include $(LUFA_PATH)/Build/lufa_cppcheck.mk

-include $(LUFA_PATH)/Build/lufa_doxygen.mk

-include $(LUFA_PATH)/Build/lufa_hid.mk

+#
+#             LUFA Library
+#     Copyright (C) Dean Camera, 2014.
+#
+#  dean [at] fourwalledcubicle [dot] com
+#           www.lufa-lib.org
+#
+# --------------------------------------
+#         LUFA Project Makefile.
+# --------------------------------------
+
+# Run "make help" for target help.
+
+MCU          = at90usb1287
+ARCH         = AVR8
+F_CPU        = 1000000
+F_USB        = $(F_CPU)
+OPTIMIZATION = s
+TARGET       = HID_EEPROM_Loader
+SRC          = $(TARGET).c
+LUFA_PATH    = ../../../LUFA
+CC_FLAGS     =
+LD_FLAGS     =
+OBJECT_FILES = InputEEData.o
+
+# Default target
+all:
+
+# Determine the AVR sub-architecture of the build main application object file
+FIND_AVR_SUBARCH = avr$(shell avr-objdump -f $(TARGET).o | grep architecture | cut -d':' -f3 | cut -d',' -f1)
+
+# Create a linkable object file with the input binary EEPROM data stored in the FLASH section
+InputEEData.o: InputEEData.bin $(TARGET).o $(MAKEFILE_LIST)
+	@echo $(MSG_OBJCPY_CMD) Converting \"$<\" to a object file \"$@\"
+	avr-objcopy -I binary -O elf32-avr -B $(call FIND_AVR_SUBARCH) --rename-section .data=.progmem.data,contents,alloc,readonly,data $< $@
+
+# Include LUFA build script makefiles
+include $(LUFA_PATH)/Build/lufa_core.mk
+include $(LUFA_PATH)/Build/lufa_build.mk
+include $(LUFA_PATH)/Build/lufa_cppcheck.mk
+include $(LUFA_PATH)/Build/lufa_doxygen.mk
+include $(LUFA_PATH)/Build/lufa_hid.mk
diff --git a/tmk_core/protocol/lufa/LUFA-git/LUFA/CodeTemplates/DeviceTemplate/asf.xml b/tmk_core/protocol/lufa/LUFA-git/LUFA/CodeTemplates/DeviceTemplate/asf.xml
index fd65db283f..e952714e16 100644
--- a/tmk_core/protocol/lufa/LUFA-git/LUFA/CodeTemplates/DeviceTemplate/asf.xml
+++ b/tmk_core/protocol/lufa/LUFA-git/LUFA/CodeTemplates/DeviceTemplate/asf.xml
@@ -1,55 +1,55 @@
-<asf xmlversion="1.0">

-	<project caption="USB Device Template" id="lufa.templates.device.project.avr8">

-		<require idref="lufa.templates.device"/>

-		<require idref="lufa.boards.dummy.avr8"/>

-		<generator value="as5_8_template"/>

-

-		<device-support value="at90usb1287"/>

-		<config name="lufa.drivers.board.name" value="usbkey"/>

-

-		<build type="define" name="F_CPU" value="8000000UL"/>

-		<build type="define" name="F_USB" value="8000000UL"/>

-	</project>

-

-	<project caption="USB Device Template" id="lufa.templates.device.project.xmega">

-		<require idref="lufa.templates.device"/>

-		<require idref="lufa.boards.dummy.xmega"/>

-		<generator value="as5_8_template"/>

-

-		<device-support value="atxmega256a3bu"/>

-		<config name="lufa.drivers.board.name" value="a3bu_xplained"/>

-

-		<build type="define" name="F_CPU" value="32000000UL"/>

-		<build type="define" name="F_USB" value="48000000UL"/>

-	</project>

-

-	<module type="application" id="lufa.templates.device" caption="USB Device Template">

-		<info type="description" value="summary">

-		Template for a LUFA USB device mode application.

-		</info>

-

- 		<info type="gui-flag" value="move-to-root"/>

-

-		<info type="keyword" value="Technology">

-			<keyword value="USB Device"/>

-			<keyword value="Template Projects"/>

-		</info>

-

-		<device-support-alias value="lufa_avr8"/>

-		<device-support-alias value="lufa_xmega"/>

-		<device-support-alias value="lufa_uc3"/>

-

-		<build type="c-source" value="DeviceApplication.c"/>

-		<build type="c-source" value="Descriptors.c"/>

-		<build type="header-file" value="DeviceApplication.h"/>

-		<build type="header-file" value="Descriptors.h"/>

-

-		<build type="module-config" subtype="path" value=".."/>

-		<build type="header-file" value="../LUFAConfig.h"/>

-

-		<require idref="lufa.common"/>

-		<require idref="lufa.platform"/>

-		<require idref="lufa.drivers.usb"/>

-		<require idref="lufa.drivers.board"/>

-	</module>

-</asf>

+<asf xmlversion="1.0">
+	<project caption="USB Device Template" id="lufa.templates.device.project.avr8">
+		<require idref="lufa.templates.device"/>
+		<require idref="lufa.boards.dummy.avr8"/>
+		<generator value="as5_8_template"/>
+
+		<device-support value="at90usb1287"/>
+		<config name="lufa.drivers.board.name" value="usbkey"/>
+
+		<build type="define" name="F_CPU" value="8000000UL"/>
+		<build type="define" name="F_USB" value="8000000UL"/>
+	</project>
+
+	<project caption="USB Device Template" id="lufa.templates.device.project.xmega">
+		<require idref="lufa.templates.device"/>
+		<require idref="lufa.boards.dummy.xmega"/>
+		<generator value="as5_8_template"/>
+
+		<device-support value="atxmega256a3bu"/>
+		<config name="lufa.drivers.board.name" value="a3bu_xplained"/>
+
+		<build type="define" name="F_CPU" value="32000000UL"/>
+		<build type="define" name="F_USB" value="48000000UL"/>
+	</project>
+
+	<module type="application" id="lufa.templates.device" caption="USB Device Template">
+		<info type="description" value="summary">
+		Template for a LUFA USB device mode application.
+		</info>
+
+ 		<info type="gui-flag" value="move-to-root"/>
+
+		<info type="keyword" value="Technology">
+			<keyword value="USB Device"/>
+			<keyword value="Template Projects"/>
+		</info>
+
+		<device-support-alias value="lufa_avr8"/>
+		<device-support-alias value="lufa_xmega"/>
+		<device-support-alias value="lufa_uc3"/>
+
+		<build type="c-source" value="DeviceApplication.c"/>
+		<build type="c-source" value="Descriptors.c"/>
+		<build type="header-file" value="DeviceApplication.h"/>
+		<build type="header-file" value="Descriptors.h"/>
+
+		<build type="module-config" subtype="path" value=".."/>
+		<build type="header-file" value="../LUFAConfig.h"/>
+
+		<require idref="lufa.common"/>
+		<require idref="lufa.platform"/>
+		<require idref="lufa.drivers.usb"/>
+		<require idref="lufa.drivers.board"/>
+	</module>
+</asf>
diff --git a/tmk_core/protocol/lufa/LUFA-git/LUFA/CodeTemplates/HostTemplate/asf.xml b/tmk_core/protocol/lufa/LUFA-git/LUFA/CodeTemplates/HostTemplate/asf.xml
index c1996ec711..c3860c056d 100644
--- a/tmk_core/protocol/lufa/LUFA-git/LUFA/CodeTemplates/HostTemplate/asf.xml
+++ b/tmk_core/protocol/lufa/LUFA-git/LUFA/CodeTemplates/HostTemplate/asf.xml
@@ -1,41 +1,41 @@
-<asf xmlversion="1.0">

-	<project caption="USB Host Template" id="lufa.templates.host.project">

-		<require idref="lufa.templates.host"/>

-		<require idref="lufa.boards.dummy.avr8"/>

-		<generator value="as5_8_template"/>

-

-		<device-support value="at90usb1287"/>

-		<config name="lufa.drivers.board.name" value="usbkey"/>

-

-		<build type="define" name="F_CPU" value="8000000UL"/>

-		<build type="define" name="F_USB" value="8000000UL"/>

-	</project>

-

-	<module type="application" id="lufa.templates.host" caption="USB Host Template">

-		<info type="description" value="summary">

-		Template for a LUFA USB host mode application.

-		</info>

-

- 		<info type="gui-flag" value="move-to-root"/>

-

-		<info type="keyword" value="Technology">

-			<keyword value="USB Host"/>

-			<keyword value="Template Projects"/>

-		</info>

-

-		<device-support-alias value="lufa_avr8"/>

-		<device-support-alias value="lufa_xmega"/>

-		<device-support-alias value="lufa_uc3"/>

-

-		<build type="c-source" value="HostApplication.c"/>

-		<build type="header-file" value="HostApplication.h"/>

-

-		<build type="module-config" subtype="path" value=".."/>

-		<build type="header-file" value="../LUFAConfig.h"/>

-

-		<require idref="lufa.common"/>

-		<require idref="lufa.platform"/>

-		<require idref="lufa.drivers.usb"/>

-		<require idref="lufa.drivers.board"/>

-	</module>

-</asf>

+<asf xmlversion="1.0">
+	<project caption="USB Host Template" id="lufa.templates.host.project">
+		<require idref="lufa.templates.host"/>
+		<require idref="lufa.boards.dummy.avr8"/>
+		<generator value="as5_8_template"/>
+
+		<device-support value="at90usb1287"/>
+		<config name="lufa.drivers.board.name" value="usbkey"/>
+
+		<build type="define" name="F_CPU" value="8000000UL"/>
+		<build type="define" name="F_USB" value="8000000UL"/>
+	</project>
+
+	<module type="application" id="lufa.templates.host" caption="USB Host Template">
+		<info type="description" value="summary">
+		Template for a LUFA USB host mode application.
+		</info>
+
+ 		<info type="gui-flag" value="move-to-root"/>
+
+		<info type="keyword" value="Technology">
+			<keyword value="USB Host"/>
+			<keyword value="Template Projects"/>
+		</info>
+
+		<device-support-alias value="lufa_avr8"/>
+		<device-support-alias value="lufa_xmega"/>
+		<device-support-alias value="lufa_uc3"/>
+
+		<build type="c-source" value="HostApplication.c"/>
+		<build type="header-file" value="HostApplication.h"/>
+
+		<build type="module-config" subtype="path" value=".."/>
+		<build type="header-file" value="../LUFAConfig.h"/>
+
+		<require idref="lufa.common"/>
+		<require idref="lufa.platform"/>
+		<require idref="lufa.drivers.usb"/>
+		<require idref="lufa.drivers.board"/>
+	</module>
+</asf>
diff --git a/tmk_core/protocol/lufa/LUFA-git/LUFA/DoxygenPages/BuildSystem.txt b/tmk_core/protocol/lufa/LUFA-git/LUFA/DoxygenPages/BuildSystem.txt
index 7ddfa1be3f..0ae1dd678f 100644
--- a/tmk_core/protocol/lufa/LUFA-git/LUFA/DoxygenPages/BuildSystem.txt
+++ b/tmk_core/protocol/lufa/LUFA-git/LUFA/DoxygenPages/BuildSystem.txt
@@ -1,975 +1,975 @@
-/** \file

- *

- *  This file contains special DoxyGen information for the generation of the main page and other special

- *  documentation pages. It is not a project source file.

- */

-

-/** \page Page_BuildSystem The LUFA Build System

- *

- *  \section Sec_BuildSystem_Overview Overview of the LUFA Build System

- *  The LUFA build system is an attempt at making a set of re-usable, modular build make files which

- *  can be referenced in a LUFA powered project, to minimize the amount of code required in an

- *  application makefile. The system is written in GNU Make, and each module is independent of

- *  one-another.

- *

- *  For details on the prerequisites needed for Linux and Windows machines to be able to use the LUFA

- *  build system, see \ref Sec_CompilingApps_Prerequisites.

- *

- *  To use a LUFA build system module, simply add an include to your project makefile. All user projects

- *  should at a minimum include \ref Page_BuildModule_CORE for base functionality:

- *  \code

- *  include $(LUFA_PATH)/Build/lufa_core.mk

- *  \endcode

- *

- *  Once included in your project makefile, the associated build module targets will be added to your

- *  project's build makefile targets automatically. To call a build target, run <tt>make {TARGET_NAME}</tt>

- *  from the command line, substituting in the appropriate target name.

- *

- *  \see \ref Sec_ConfiguringApps_AppMakefileParams for a copy of the sample LUFA project makefile.

- *

- *  Each build module may have one or more mandatory parameters (GNU Make variables) which <i>must</i>

- *  be supplied in the project makefile for the module to work, and one or more optional parameters which

- *  may be defined and which will assume a sensible default if not.

- *

- *  \section SSec_BuildSystem_Modules Available Modules

- *

- *  The following modules are included in this LUFA release:

- *

- *  \li \subpage Page_BuildModule_ATPROGRAM - Device Programming

- *  \li \subpage Page_BuildModule_AVRDUDE - Device Programming

- *  \li \subpage Page_BuildModule_BUILD - Compiling/Assembling/Linking

- *  \li \subpage Page_BuildModule_CORE - Core Build System Functions

- *  \li \subpage Page_BuildModule_CPPCHECK - Static Code Analysis

- *  \li \subpage Page_BuildModule_DFU - Device Programming

- *  \li \subpage Page_BuildModule_DOXYGEN - Automated Source Code Documentation

- *  \li \subpage Page_BuildModule_HID - Device Programming

- *  \li \subpage Page_BuildModule_SOURCES - LUFA Module Source Code Variables

- *

- *  If you have problems building using the LUFA build system, see \subpage Page_BuildTroubleshooting for resolution steps.

- */

-

- /** \page Page_BuildModule_BUILD The BUILD build module

- *

- *  The BUILD LUFA build system module, providing targets for the compilation,

- *  assembling and linking of an application from source code into binary files

- *  suitable for programming into a target device, using the GCC compiler.

- *

- *  To use this module in your application makefile, add the following code:

- *  \code

- *  include $(LUFA_PATH)/Build/lufa_build.mk

- *  \endcode

- *

- *  \section SSec_BuildModule_BUILD_Requirements Requirements

- *  This module requires the the architecture appropriate binaries of the GCC compiler are available in your

- *  system's <b>PATH</b> variable. The GCC compiler and associated toolchain is distributed in Atmel AVR Studio

- *  5.x and Atmel Studio 6.x installation directories, as well as in many third party distribution packages.

- *

- *  \section SSec_BuildModule_BUILD_Targets Targets

- *

- *  <table>

- *   <tr>

- *    <td><tt>size</tt></td>

- *    <td>Display size of the compiled application FLASH and SRAM segments.</td>

- *   </tr>

- *   <tr>

- *    <td><tt>symbol-sizes</tt></td>

- *    <td>Display a size-sorted list of symbols from the compiled application, in decimal bytes.</td>

- *   </tr>

- *   <tr>

- *    <td><tt>lib</tt></td>

- *    <td>Build and archive all source files into a library A binary file.</td>

- *   </tr>

- *   <tr>

- *    <td><tt>all</tt></td>

- *    <td>Build and link the application into ELF debug and HEX binary files.</td>

- *   </tr>

- *   <tr>

- *    <td><tt>elf</tt></td>

- *    <td>Build and link the application into an ELF debug file.</td>

- *   </tr>

- *   <tr>

- *    <td><tt>bin</tt></td>

- *    <td>Build and link the application and produce a BIN binary file.</td>

- *   </tr>

- *   <tr>

- *    <td><tt>hex</tt></td>

- *    <td>Build and link the application and produce HEX and EEP binary files.</td>

- *   </tr>

- *   <tr>

- *    <td><tt>lss</tt></td>

- *    <td>Build and link the application and produce a LSS source code/assembly code mixed listing file.</td>

- *   </tr>

- *   <tr>

- *    <td><tt>clean</tt></td>

- *    <td>Remove all intermediary files and binary output files.</td>

- *   </tr>

- *   <tr>

- *    <td><tt>mostlyclean</tt></td>

- *    <td>Remove all intermediary files but preserve any binary output files.</td>

- *   </tr>

- *   <tr>

- *    <td><tt><i>&lt;filename&gt;</i>.s</tt></td>

- *    <td>Create an assembly listing of a given input C/C++ source file.</td>

- *   </tr>

- *  </table>

- *

- *  \section SSec_BuildModule_BUILD_MandatoryParams Mandatory Parameters

- *

- *  <table>

- *   <tr>

- *    <td><tt>TARGET</tt></td>

- *    <td>Name of the application output file prefix (e.g. <tt>TestApplication</tt>).</td>

- *   </tr>

- *   <tr>

- *    <td><tt>ARCH</tt></td>

- *    <td>Architecture of the target processor (see \ref Page_DeviceSupport).</td>

- *   </tr>

- *   <tr>

- *    <td><tt>MCU</tt></td>

- *    <td>Name of the Atmel processor model (e.g. <tt>at90usb1287</tt>).</td>

- *   </tr>

- *   <tr>

- *    <td><tt>SRC</tt></td>

- *    <td>List of relative or absolute paths to the application C (.c), C++ (.cpp) and Assembly (.S) source files.</td>

- *   </tr>

- *   <tr>

- *    <td><tt>F_USB</tt></td>

- *    <td>Speed in Hz of the input clock frequency to the target's USB controller.</td>

- *   </tr>

- *   <tr>

- *    <td><tt>LUFA_PATH</tt></td>

- *    <td>Path to the LUFA library core, either relative or absolute (e.g. <tt>../LUFA-000000/LUFA/</tt>).</td>

- *   </tr>

- *  </table>

- *

- *  \section SSec_BuildModule_BUILD_OptionalParams Optional Parameters

- *

- *  <table>

- *   <tr>

- *    <td><tt>BOARD</tt></td>

- *    <td>LUFA board hardware drivers to use (see \ref Page_DeviceSupport).</td>

- *   </tr>

- *   <tr>

- *    <td><tt>OPTIMIZATION</tt></td>

- *    <td>Optimization level to use when compiling source files (see GCC manual).</td>

- *   </tr>

- *   <tr>

- *    <td><tt>C_STANDARD</tt></td>

- *    <td>Version of the C standard to apply when compiling C++ source files (see GCC manual).</td>

- *   </tr>

- *   <tr>

- *    <td><tt>CPP_STANDARD</tt></td>

- *    <td>Version of the C++ standard to apply when compiling C++ source files (see GCC manual).</td>

- *   </tr>

- *   <tr>

- *    <td><tt>DEBUG_FORMAT</tt></td>

- *    <td>Format of the debug information to embed in the generated object files (see GCC manual).</td>

- *   </tr>

- *   <tr>

- *    <td><tt>DEBUG_LEVEL</tt></td>

- *    <td>Level of the debugging information to embed in the generated object files (see GCC manual).</td>

- *   </tr>

- *   <tr>

- *    <td><tt>F_CPU</tt></td>

- *    <td>Speed of the processor CPU clock, in Hz.</td>

- *   </tr>

- *   <tr>

- *    <td><tt>C_FLAGS</tt></td>

- *    <td>Flags to pass to the C compiler only, after the automatically generated flags.</td>

- *   </tr>

- *   <tr>

- *    <td><tt>CPP_FLAGS</tt></td>

- *    <td>Flags to pass to the C++ compiler only, after the automatically generated flags.</td>

- *   </tr>

- *   <tr>

- *    <td><tt>ASM_FLAGS</tt></td>

- *    <td>Flags to pass to the assembler only, after the automatically generated flags.</td>

- *   </tr>

- *   <tr>

- *    <td><tt>CC_FLAGS</tt></td>

- *    <td>Common flags to pass to the C/C++ compiler and assembler, after the automatically generated flags.</td>

- *   </tr>

- *   <tr>

- *    <td><tt>COMPILER_PATH</tt></td>

- *    <td>Directory where the C/C++ toolchain is located, if not available in the system <tt>PATH</tt>.</td>

- *   </tr>

- *   <tr>

- *    <td><tt>LD_FLAGS</tt></td>

- *    <td>Flags to pass to the linker, after the automatically generated flags.</td>

- *   </tr>

- *   <tr>

- *    <td><tt>LINKER_RELAXATIONS</tt></td>

- *    <td>Enables or disables linker relaxations when linking the application binary. This can reduce the total size

- *        of the application by replacing full \c CALL instructions with smaller \c RCALL instructions where possible.

- *        \note On some unpatched versions of binutils, this can cause link failures in some circumstances. If you

- *              receive a link error <tt>relocation truncated to fit: R_AVR_13_PCREL</tt>, disable this setting.</td>

- *   </tr>

- *   <tr>

- *    <td><tt>OBJDIR</tt></td>

- *    <td>Directory to place the generated object and dependency files. If set to "." the same folder as the source file will be used.

- *        \note When this option is enabled, all source filenames <b>must</b> be unique.</td>

- *   </tr>

- *   <tr>

- *    <td><tt>OBJECT_FILES</tt></td>

- *    <td>List of additional object files that should be linked into the resulting binary.</td>

- *   </tr>

- *  </table>

- *

- *  \section SSec_BuildModule_BUILD_ProvidedVariables Module Provided Variables

- *

- *  <table>

- *   <tr>

- *    <td><i>None</i></td>

- *   </tr>

- *  </table>

- *

- *  \section SSec_BuildModule_BUILD_ProvidedMacros Module Provided Macros

- *

- *  <table>

- *   <tr>

- *    <td><i>None</i></td>

- *   </tr>

- *  </table>

- */

-

-/** \page Page_BuildModule_CORE The CORE build module

- *

- *  The core LUFA build system module, providing common build system help and information targets.

- *

- *  To use this module in your application makefile, add the following code:

- *  \code

- *  include $(LUFA_PATH)/Build/lufa_core.mk

- *  \endcode

- *

- *  \section SSec_BuildModule_CORE_Requirements Requirements

- *  This module has no requirements outside a standard *nix shell like environment; the <tt>sh</tt>

- *  shell, GNU <tt>make</tt> and *nix CoreUtils (<tt>echo</tt>, <tt>printf</tt>, etc.).

- *

- *  \section SSec_BuildModule_CORE_Targets Targets

- *

- *  <table>

- *   <tr>

- *    <td><tt>help</tt></td>

- *    <td>Display build system help and configuration information.</td>

- *   </tr>

- *   <tr>

- *    <td><tt>list_targets</tt></td>

- *    <td>List all available build targets from the build system.</td>

- *   </tr>

- *   <tr>

- *    <td><tt>list_modules</tt></td>

- *    <td>List all available build modules from the build system.</td>

- *   </tr>

- *   <tr>

- *    <td><tt>list_mandatory</tt></td>

- *    <td>List all mandatory parameters required by the included modules.</td>

- *   </tr>

- *   <tr>

- *    <td><tt>list_optional</tt></td>

- *    <td>List all optional parameters required by the included modules.</td>

- *   </tr>

- *   <tr>

- *    <td><tt>list_provided</tt></td>

- *    <td>List all variables provided by the included modules.</td>

- *   </tr>

- *   <tr>

- *    <td><tt>list_macros</tt></td>

- *    <td>List all macros provided by the included modules.</td>

- *   </tr>

- *  </table>

- *

- *  \section SSec_BuildModule_CORE_MandatoryParams Mandatory Parameters

- *

- *  <table>

- *   <tr>

- *    <td><i>None</i></td>

- *   </tr>

- *  </table>

- *

- *  \section SSec_BuildModule_CORE_OptionalParams Optional Parameters

- *

- *  <table>

- *   <tr>

- *    <td><i>None</i></td>

- *   </tr>

- *  </table>

- *

- *  \section SSec_BuildModule_CORE_ProvidedVariables Module Provided Variables

- *

- *  <table>

- *   <tr>

- *    <td><i>None</i></td>

- *   </tr>

- *  </table>

- *

- *  \section SSec_BuildModule_CORE_ProvidedMacros Module Provided Macros

- *

- *  <table>

- *   <tr>

- *    <td><i>None</i></td>

- *   </tr>

- *  </table>

- */

-

-/** \page Page_BuildModule_ATPROGRAM The ATPROGRAM build module

- *

- *  The ATPROGRAM programming utility LUFA build system module, providing targets to reprogram an

- *  Atmel processor FLASH and EEPROM memories with a project's compiled binary output files.

- *

- *  To use this module in your application makefile, add the following code:

- *  \code

- *  include $(LUFA_PATH)/Build/lufa_atprogram.mk

- *  \endcode

- *

- *  \section SSec_BuildModule_ATPROGRAM_Requirements Requirements

- *  This module requires the <tt>atprogram.exe</tt> utility to be available in your system's <b>PATH</b>

- *  variable. The <tt>atprogram.exe</tt> utility is distributed in Atmel AVR Studio 5.x and Atmel Studio 6.x

- *  inside the application install folder's "\atbackend" subdirectory.

- *

- *  \section SSec_BuildModule_ATPROGRAM_Targets Targets

- *

- *  <table>

- *   <tr>

- *    <td><tt>atprogram</tt></td>

- *    <td>Program the device FLASH memory with the application's executable data.</td>

- *   </tr>

- *   <tr>

- *    <td><tt>atprogram-ee</tt></td>

- *    <td>Program the device EEPROM memory with the application's EEPROM data.</td>

- *   </tr>

- *  </table>

- *

- *  \section SSec_BuildModule_ATPROGRAM_MandatoryParams Mandatory Parameters

- *

- *  <table>

- *   <tr>

- *    <td><tt>MCU</tt></td>

- *    <td>Name of the Atmel processor model (e.g. <tt>at90usb1287</tt>).</td>

- *   </tr>

- *   <tr>

- *    <td><tt>TARGET</tt></td>

- *    <td>Name of the application output file prefix (e.g. <tt>TestApplication</tt>).</td>

- *   </tr>

- *  </table>

- *

- *  \section SSec_BuildModule_ATPROGRAM_OptionalParams Optional Parameters

- *

- *  <table>

- *   <tr>

- *    <td><tt>ATPROGRAM_PROGRAMMER</tt></td>

- *    <td>Name of the Atmel programmer or debugger tool to communicate with (e.g. <tt>jtagice3</tt>).</td>

- *   </tr>

- *   <tr>

- *    <td><tt>ATPROGRAM_INTERFACE</tt></td>

- *    <td>Name of the programming interface to use when programming the target (e.g. <tt>spi</tt>).</td>

- *   </tr>

- *   <tr>

- *    <td><tt>ATPROGRAM_PORT</tt></td>

- *    <td>Name of the communication port to use when when programming with a serially connected tool (e.g. <tt>COM2</tt>).</td>

- *   </tr>

- *  </table>

- *

- *  \section SSec_BuildModule_ATPROGRAM_ProvidedVariables Module Provided Variables

- *

- *  <table>

- *   <tr>

- *    <td><i>None</i></td>

- *   </tr>

- *  </table>

- *

- *  \section SSec_BuildModule_ATPROGRAM_ProvidedMacros Module Provided Macros

- *

- *  <table>

- *   <tr>

- *    <td><i>None</i></td>

- *   </tr>

- *  </table>

- */

-

-/** \page Page_BuildModule_AVRDUDE The AVRDUDE build module

- *

- *  The AVRDUDE programming utility LUFA build system module, providing targets to reprogram an

- *  Atmel processor FLASH and EEPROM memories with a project's compiled binary output files.

- *

- *  To use this module in your application makefile, add the following code:

- *  \code

- *  include $(LUFA_PATH)/Build/lufa_avrdude.mk

- *  \endcode

- *

- *  \section SSec_BuildModule_AVRDUDE_Requirements Requirements

- *  This module requires the <tt>avrdude</tt> utility to be available in your system's <b>PATH</b>

- *  variable. The <tt>avrdude</tt> utility is distributed in the old WinAVR project releases for

- *  Windows (<a>http://winavr.sourceforge.net</a>) or can be installed on *nix systems via the project's

- *  source code (<a>https://savannah.nongnu.org/projects/avrdude</a>) or through the package manager.

- *

- *  \section SSec_BuildModule_AVRDUDE_Targets Targets

- *

- *  <table>

- *   <tr>

- *    <td><tt>avrdude</tt></td>

- *    <td>Program the device FLASH memory with the application's executable data.</td>

- *   </tr>

- *   <tr>

- *    <td><tt>avrdude-ee</tt></td>

- *    <td>Program the device EEPROM memory with the application's EEPROM data.</td>

- *   </tr>

- *  </table>

- *

- *  \section SSec_BuildModule_AVRDUDE_MandatoryParams Mandatory Parameters

- *

- *  <table>

- *   <tr>

- *    <td><tt>MCU</tt></td>

- *    <td>Name of the Atmel processor model (e.g. <tt>at90usb1287</tt>).</td>

- *   </tr>

- *   <tr>

- *    <td><tt>TARGET</tt></td>

- *    <td>Name of the application output file prefix (e.g. <tt>TestApplication</tt>).</td>

- *   </tr>

- *  </table>

- *

- *  \section SSec_BuildModule_AVRDUDE_OptionalParams Optional Parameters

- *

- *  <table>

- *   <tr>

- *    <td><tt>AVRDUDE_PROGRAMMER</tt></td>

- *    <td>Name of the programmer or debugger tool to communicate with (e.g. <tt>jtagicemkii</tt>).</td>

- *   </tr>

- *   <tr>

- *    <td><tt>AVRDUDE_PORT</tt></td>

- *    <td>Name of the communication port to use when when programming with the connected tool (e.g. <tt>COM2</tt>, <tt>/dev/ttyUSB0</tt> or <tt>usb</tt>).</td>

- *   </tr>

- *   <tr>

- *    <td><tt>AVRDUDE_FLAGS</tt></td>

- *    <td>Additional flags to pass to avrdude when programming, applied after the automatically generated flags.</td>

- *   </tr>

- *  </table>

- *

- *  \section SSec_BuildModule_AVRDUDE_ProvidedVariables Module Provided Variables

- *

- *  <table>

- *   <tr>

- *    <td><i>None</i></td>

- *   </tr>

- *  </table>

- *

- *  \section SSec_BuildModule_AVRDUDE_ProvidedMacros Module Provided Macros

- *

- *  <table>

- *   <tr>

- *    <td><i>None</i></td>

- *   </tr>

- *  </table>

- */

-

- /** \page Page_BuildModule_CPPCHECK The CPPCHECK build module

- *

- *  The CPPCHECK programming utility LUFA build system module, providing targets to statically

- *  analyze C and C++ source code for errors and performance/style issues.

- *

- *  To use this module in your application makefile, add the following code:

- *  \code

- *  include $(LUFA_PATH)/Build/lufa_cppcheck.mk

- *  \endcode

- *

- *  \section SSec_BuildModule_CPPCHECK_Requirements Requirements

- *  This module requires the <tt>cppcheck</tt> utility to be available in your system's <b>PATH</b>

- *  variable. The <tt>cppcheck</tt> utility is distributed through the project's home page

- *  (<a>http://cppcheck.sourceforge.net</a>) for Windows, and can be installed on *nix systems via

- *  the project's source code or through the package manager.

- *

- *  \section SSec_BuildModule_CPPCHECK_Targets Targets

- *

- *  <table>

- *   <tr>

- *    <td><tt>cppcheck</tt></td>

- *    <td>Statically analyze the project source code for issues.</td>

- *   </tr>

- *   <tr>

- *    <td><tt>cppcheck-config</tt></td>

- *    <td>Check the <tt>cppcheck</tt> configuration - scan source code and warn about missing header files and other issues.</td>

- *   </tr>

- *  </table>

- *

- *  \section SSec_BuildModule_CPPCHECK_MandatoryParams Mandatory Parameters

- *

- *  <table>

- *   <tr>

- *    <td><tt>SRC</tt></td>

- *    <td>List of source files to statically analyze.</td>

- *   </tr>

- *  </table>

- *

- *  \section SSec_BuildModule_CPPCHECK_OptionalParams Optional Parameters

- *

- *  <table>

- *   <tr>

- *    <td><tt>CPPCHECK_INCLUDES</tt></td>

- *    <td>Path of extra directories to check when attemting to resolve C/C++ header file includes.</td>

- *   </tr>

- *   <tr>

- *    <td><tt>CPPCHECK_EXCLUDES</tt></td>

- *    <td>Paths or path fragments to exclude when analyzing.</td>

- *   </tr>

- *   <tr>

- *    <td><tt>CPPCHECK_MSG_TEMPLATE</tt></td>

- *    <td>Output message template to use when printing errors, warnings and information (see <tt>cppcheck</tt> documentation).</td>

- *   </tr>

- *   <tr>

- *    <td><tt>CPPCHECK_ENABLE</tt></td>

- *    <td>Analysis rule categories to enable (see <tt>cppcheck</tt> documentation).</td>

- *   </tr>

- *   <tr>

- *    <td><tt>CPPCHECK_SUPPRESS</tt></td>

- *    <td>Specific analysis rules to suppress (see <tt>cppcheck</tt> documentation).</td>

- *   </tr>

- *   <tr>

- *    <td><tt>CPPCHECK_FAIL_ON_WARNING</tt></td>

- *    <td>Set to <b>Y</b> to fail the analysis job with an error exit code if warnings are found, <b>N</b> to continue without failing.</td>

- *   </tr>

- *   <tr>

- *    <td><tt>CPPCHECK_QUIET</tt></td>

- *    <td>Set to <b>Y</b> to suppress all output except warnings and errors, <b>N</b> to show verbose output information.</td>

- *   </tr>

- *   <tr>

- *    <td><tt>CPPCHECK_FLAGS</tt></td>

- *    <td>Extra flags to pass to <tt>cppcheck</tt>, after the automatically generated flags.</td>

- *   </tr>

- *  </table>

- *

- *  \section SSec_BuildModule_CPPCHECK_ProvidedVariables Module Provided Variables

- *

- *  <table>

- *   <tr>

- *    <td><i>None</i></td>

- *   </tr>

- *  </table>

- *

- *  \section SSec_BuildModule_CPPCHECK_ProvidedMacros Module Provided Macros

- *

- *  <table>

- *   <tr>

- *    <td><i>None</i></td>

- *   </tr>

- *  </table>

- */

-

- /** \page Page_BuildModule_DFU The DFU build module

- *

- *  The DFU programming utility LUFA build system module, providing targets to reprogram an

- *  Atmel processor FLASH and EEPROM memories with a project's compiled binary output files.

- *  This module requires a DFU class bootloader to be running in the target, compatible with

- *  the DFU bootloader protocol as published by Atmel.

- *

- *  To use this module in your application makefile, add the following code:

- *  \code

- *  include $(LUFA_PATH)/Build/lufa_dfu.mk

- *  \endcode

- *

- *  \section SSec_BuildModule_DFU_Requirements Requirements

- *  This module requires either the <tt>batchisp</tt> utility from Atmel's FLIP utility, or the open

- *  source <tt>dfu-programmer</tt> utility (<a>http://dfu-programmer.sourceforge.net/</a>) to be

- *  available in your system's <b>PATH</b> variable. On *nix systems the <tt>dfu-programmer</tt> utility

- *  can be installed via the project's source code or through the package manager.

- *

- *  \section SSec_BuildModule_DFU_Targets Targets

- *

- *  <table>

- *   <tr>

- *    <td><tt>dfu</tt></td>

- *    <td>Program the device FLASH memory with the application's executable data using <tt>dfu-programmer</tt>.</td>

- *   </tr>

- *   <tr>

- *    <td><tt>dfu-ee</tt></td>

- *    <td>Program the device EEPROM memory with the application's EEPROM data using <tt>dfu-programmer</tt>.</td>

- *   </tr>

- *   <tr>

- *    <td><tt>flip</tt></td>

- *    <td>Program the device FLASH memory with the application's executable data using <tt>batchisp</tt>.</td>

- *   </tr>

- *   <tr>

- *    <td><tt>flip-ee</tt></td>

- *    <td>Program the device EEPROM memory with the application's EEPROM data using <tt>batchisp</tt>.</td>

- *   </tr>

- *  </table>

- *

- *  \section SSec_BuildModule_DFU_MandatoryParams Mandatory Parameters

- *

- *  <table>

- *   <tr>

- *    <td><tt>MCU</tt></td>

- *    <td>Name of the Atmel processor model (e.g. <tt>at90usb1287</tt>).</td>

- *   </tr>

- *   <tr>

- *    <td><tt>TARGET</tt></td>

- *    <td>Name of the application output file prefix (e.g. <tt>TestApplication</tt>).</td>

- *   </tr>

- *  </table>

- *

- *  \section SSec_BuildModule_DFU_OptionalParams Optional Parameters

- *

- *  <table>

- *   <tr>

- *    <td><i>None</i></td>

- *   </tr>

- *  </table>

- *

- *  \section SSec_BuildModule_DFU_ProvidedVariables Module Provided Variables

- *

- *  <table>

- *   <tr>

- *    <td><i>None</i></td>

- *   </tr>

- *  </table>

- *

- *  \section SSec_BuildModule_DFU_ProvidedMacros Module Provided Macros

- *

- *  <table>

- *   <tr>

- *    <td><i>None</i></td>

- *   </tr>

- *  </table>

- */

-

- /** \page Page_BuildModule_DOXYGEN The DOXYGEN build module

- *

- *  The DOXYGEN code documentation utility LUFA build system module, providing targets to generate

- *  project HTML and other format documentation from a set of source files that include special

- *  Doxygen comments.

- *

- *  To use this module in your application makefile, add the following code:

- *  \code

- *  include $(LUFA_PATH)/Build/lufa_doxygen.mk

- *  \endcode

- *

- *  \section SSec_BuildModule_DOXYGEN_Requirements Requirements

- *  This module requires the <tt>doxygen</tt> utility from the Doxygen website

- *  (<a>http://www.doxygen.org/</a>) to be available in your system's <b>PATH</b> variable. On *nix

- *  systems the <tt>doxygen</tt> utility can be installed via the project's source code or through

- *  the package manager.

- *

- *  \section SSec_BuildModule_DOXYGEN_Targets Targets

- *

- *  <table>

- *   <tr>

- *    <td><tt>doxygen</tt></td>

- *    <td>Generate project documentation.</td>

- *   </tr>

- *   <tr>

- *    <td><tt>doxygen_create</tt></td>

- *    <td>Create a new Doxygen configuration file using the latest template.</td>

- *   </tr>

- *   <tr>

- *    <td><tt>doxygen_upgrade</tt></td>

- *    <td>Upgrade an existing Doxygen configuration file to the latest template</td>

- *   </tr>

- *  </table>

- *

- *  \section SSec_BuildModule_DOXYGEN_MandatoryParams Mandatory Parameters

- *

- *  <table>

- *   <tr>

- *    <td><tt>LUFA_PATH</tt></td>

- *    <td>Path to the LUFA library core, either relative or absolute (e.g. <tt>../LUFA-000000/LUFA/</tt>).</td>

- *   </tr>

- *  </table>

- *

- *  \section SSec_BuildModule_DOXYGEN_OptionalParams Optional Parameters

- *

- *  <table>

- *   <tr>

- *    <td><tt>DOXYGEN_CONF</tt></td>

- *    <td>Name and path of the base Doxygen configuration file for the project.</td>

- *   </tr>

- *   <tr>

- *    <td><tt>DOXYGEN_FAIL_ON_WARNING</tt></td>

- *    <td>Set to <b>Y</b> to fail the generation with an error exit code if warnings are found other than unsupported configuration parameters, <b>N</b> to continue without failing.</td>

- *   </tr>

- *   <tr>

- *    <td><tt>DOXYGEN_OVERRIDE_PARAMS</tt></td>

- *    <td>Extra Doxygen configuration parameters to apply, overriding the corresponding config entry in the project's configuration file (e.g. <tt>QUIET=YES</tt>).</td>

- *   </tr>

- *  </table>

- *

- *  \section SSec_BuildModule_DOXYGEN_ProvidedVariables Module Provided Variables

- *

- *  <table>

- *   <tr>

- *    <td><i>None</i></td>

- *   </tr>

- *  </table>

- *

- *  \section SSec_BuildModule_DOXYGEN_ProvidedMacros Module Provided Macros

- *

- *  <table>

- *   <tr>

- *    <td><i>None</i></td>

- *   </tr>

- *  </table>

- */

-

- /** \page Page_BuildModule_HID The HID build module

- *

- *  The HID programming utility LUFA build system module, providing targets to reprogram an

- *  Atmel processor's FLASH memory with a project's compiled binary output file. This module

- *  requires a HID class bootloader to be running in the target, using a protocol compatible

- *  with the PJRC "HalfKay" protocol (<a>http://www.pjrc.com/teensy/halfkay_protocol.html</a>).

- *

- *  To use this module in your application makefile, add the following code:

- *  \code

- *  include $(LUFA_PATH)/Build/lufa_hid.mk

- *  \endcode

- *

- *  \section SSec_BuildModule_HID_Requirements Requirements

- *  This module requires either the <tt>hid_bootloader_cli</tt> utility from the included LUFA HID

- *  class bootloader API subdirectory, or the <tt>teensy_loader_cli</tt> utility from PJRC

- *  (<a>http://www.pjrc.com/teensy/loader_cli.html</a>) to be available in your system's <b>PATH</b>

- *  variable.

- *

- *  \section SSec_BuildModule_HID_Targets Targets

- *

- *  <table>

- *   <tr>

- *    <td><tt>hid</tt></td>

- *    <td>Program the device FLASH memory with the application's executable data using <tt>hid_bootloader_cli</tt>.</td>

- *   </tr>

- *   <tr>

- *    <td><tt>hid-ee</tt></td>

- *    <td>Program the device EEPROM memory with the application's EEPROM data using <tt>hid_bootloader_cli</tt> and

- *        a temporary AVR application programmed into the target's FLASH.

- *        \note This will erase the currently loaded application in the target.</td>

- *   </tr>

- *   <tr>

- *    <td><tt>teensy</tt></td>

- *    <td>Program the device FLASH memory with the application's executable data using <tt>teensy_loader_cli</tt>.</td>

- *   </tr>

- *   <tr>

- *    <td><tt>teensy-ee</tt></td>

- *    <td>Program the device EEPROM memory with the application's EEPROM data using <tt>teensy_loader_cli</tt> and

- *        a temporary AVR application programmed into the target's FLASH.

- *        \note This will erase the currently loaded application in the target.</td>

- *   </tr>

- *  </table>

- *

- *  \section SSec_BuildModule_HID_MandatoryParams Mandatory Parameters

- *

- *  <table>

- *   <tr>

- *    <td><tt>MCU</tt></td>

- *    <td>Name of the Atmel processor model (e.g. <tt>at90usb1287</tt>).</td>

- *   </tr>

- *   <tr>

- *    <td><tt>TARGET</tt></td>

- *    <td>Name of the application output file prefix (e.g. <tt>TestApplication</tt>).</td>

- *   </tr>

- *  </table>

- *

- *  \section SSec_BuildModule_HID_OptionalParams Optional Parameters

- *

- *  <table>

- *   <tr>

- *    <td><i>None</i></td>

- *   </tr>

- *  </table>

- *

- *  \section SSec_BuildModule_HID_ProvidedVariables Module Provided Variables

- *

- *  <table>

- *   <tr>

- *    <td><i>None</i></td>

- *   </tr>

- *  </table>

- *

- *  \section SSec_BuildModule_HID_ProvidedMacros Module Provided Macros

- *

- *  <table>

- *   <tr>

- *    <td><i>None</i></td>

- *   </tr>

- *  </table>

- */

-

- /** \page Page_BuildModule_SOURCES The SOURCES build module

- *

- *  The SOURCES LUFA build system module, providing variables listing the various LUFA source files

- *  required to be build by a project for a given LUFA module. This module gives a way to reference

- *  LUFA source files symbolically, so that changes to the library structure do not break the library

- *  makefile.

- *

- *  To use this module in your application makefile, add the following code:

- *  \code

- *  include $(LUFA_PATH)/Build/lufa_sources.mk

- *  \endcode

- *

- *  \section SSec_BuildModule_SOURCES_Requirements Requirements

- *  None.

- *

- *  \section SSec_BuildModule_SOURCES_Targets Targets

- *

- *  <table>

- *   <tr>

- *    <td><i>None</i></td>

- *   </tr>

- *  </table>

- *

- *  \section SSec_BuildModule_SOURCES_MandatoryParams Mandatory Parameters

- *

- *  <table>

- *   <tr>

- *    <td><tt>LUFA_PATH</tt></td>

- *    <td>Path to the LUFA library core, either relative or absolute (e.g. <tt>../LUFA-000000/LUFA/</tt>).</td>

- *   </tr>

- *   <tr>

- *    <td><tt>ARCH</tt></td>

- *    <td>Architecture of the target processor (see \ref Page_DeviceSupport).</td>

- *   </tr>

- *  </table>

- *

- *  \section SSec_BuildModule_SOURCES_OptionalParams Optional Parameters

- *

- *  <table>

- *   <tr>

- *    <td><i>None</i></td>

- *   </tr>

- *  </table>

- *

- *  \section SSec_BuildModule_SOURCES_ProvidedVariables Module Provided Variables

- *

- *  <table>

- *   <tr>

- *    <td><tt>LUFA_SRC_USB</tt></td>

- *    <td>List of LUFA USB driver source files.</td>

- *   </tr>

- *   <tr>

- *    <td><tt>LUFA_SRC_USBCLASS</tt></td>

- *    <td>List of LUFA USB Class driver source files.</td>

- *   </tr>

- *   <tr>

- *    <td><tt>LUFA_SRC_TEMPERATURE</tt></td>

- *    <td>List of LUFA temperature sensor driver source files.</td>

- *   </tr>

- *   <tr>

- *    <td><tt>LUFA_SRC_SERIAL</tt></td>

- *    <td>List of LUFA Serial U(S)ART driver source files.</td>

- *   </tr>

- *   <tr>

- *    <td><tt>LUFA_SRC_TWI</tt></td>

- *    <td>List of LUFA TWI driver source files.</td>

- *   </tr>

- *   <tr>

- *    <td><tt>LUFA_SRC_PLATFORM</tt></td>

- *    <td>List of LUFA architecture specific platform management source files.</td>

- *   </tr>

- *  </table>

- *

- *  \section SSec_BuildModule_SOURCES_ProvidedMacros Module Provided Macros

- *

- *  <table>

- *   <tr>

- *    <td><i>None</i></td>

- *   </tr>

- *  </table>

- */

-

-/** \page Page_BuildTroubleshooting Troubleshooting Information

- *

- *  LUFA uses a lot of advanced features of the AVR-GCC compiler, linker, and surrounding binaries. This can sometimes lead to problems compiling applications if one of these

- *  features is buggy in the version of the tools used in a build environment. Missing utilities and incorrectly set makefile configuration options can also result in different

- *  errors being produced when compilation or other operations are attempted. The table below lists a set of commonly encountered errors and their resolutions.

- *

- *  <table>

- *    <tr>

- *    <th>Problem</th>

- *    <th>Resolution</th>

- *   </tr>

- *   <tr>

- *    <td>Error &quot;<b><tt>relocation truncated to fit: R_AVR_13_PCREL against symbol <i>{X}</i></tt></b>&quot; shown when compiling.</td>

- *    <td>Try compiling with the setting <tt>LINKER_RELAXATIONS=N</tt> in your LUFA Build System 2.0 makefile, or remove the line <tt>-Wl,--relax</tt>

- *        from other makefiles. Alternatively, make sure you have the latest version of the Atmel Toolchain installed for your system.</td>

- *   </tr>

- *   <tr>

- *    <td>Error &quot;<b><tt>error: ld terminated with signal 11 [Segmentation fault]</tt></b>&quot; shown when compiling.</td>

- *    <td>Try compiling with the setting <tt>DEBUG_LEVEL=2</tt> in your LUFA Build System 2.0 makefile, or make sure you are using <tt>binutils</tt> version 2.22 or later.</td>

- *   </tr>

- *   <tr>

- *    <td>Error &quot;<b><tt>EMERGENCY ABORT: INFINITE RECURSION DETECTED</tt></b>&quot; shown when compiling.</td>

- *    <td>Make sure you are using an up to date version of GNU Make when compiling. This error is a safety system added to the mid-level makefiles, to prevent an issue with

- *        GNU make or other variants of Make causing an infinitely recursive build.</td>

- *   </tr>

- *   <tr>

- *    <td>Error &quot;<b><tt>Unsupported architecture &quot;<i>{X}</i>&quot;</tt></b>&quot; shown when compiling.</td>

- *    <td>Ensure your makefile's <tt>ARCH</tt> setting is set to one of the architecture names (case-sensitive) supported by the version of LUFA you are compiling against.</td>

- *   </tr>

- *   <tr>

- *    <td>Error &quot;<b><tt>Makefile <i>{X}</i> value not set</tt></b>&quot; shown when compiling.</td>

- *    <td>The specified Makefile value was not configured in your project's makefile or on the command line, and the nominated setting is required by one or more LUFA

- *        build system modules. Define the value in your project makefile and try again.</td>

- *   </tr>

- *   <tr>

- *    <td>Error &quot;<b><tt>Makefile <i>{X}</i> option cannot be blank</tt></b>&quot; shown when compiling.</td>

- *    <td>The specified Makefile value was configured in your project's makefile or on the command line, but was set to an empty value. For the nominated configuration

- *        option, an empty value is not allowed. Define the nominated setting to a correct non-blank value and try again.</td>

- *   </tr>

- *   <tr>

- *    <td>Error &quot;<b><tt>Makefile <i>{X}</i> option must be Y or N</tt></b>&quot; shown when compiling.</td>

- *    <td>The specified Makefile value was configured in your project's makefile or on the command line, but was set to a value other than a Y (for "Yes") or "N" (for "No").

- *        This configuration option is required to be one of the aforementioned boolean values, and other values are invalid. Set this option to either Y or N and try again.</td>

- *   </tr>

- *   <tr>

- *    <td>Error &quot;<b><tt>Unknown input source file formats: <i>{X}</i></tt></b>&quot; shown when compiling.</td>

- *    <td>The nominated source files, specified in your project's makefile in the <tt>SRC</tt> configuration option, has an extension that the LUFA build system does not

- *        recognise. The file extensions are case sensitive, and must be one of the supported formats (<tt>*.c</tt>, <tt>*.cpp</tt> or <tt>*.S</tt>).</td>

- *   </tr>

- *   <tr>

- *    <td>Error &quot;<b><tt>Cannot build with OBJDIR parameter set - one or more object file name is not unique</tt></b>&quot; shown when compiling.</td>

- *    <td>When a project is built with a non-empty <tt>OBJDIR</tt> object directory name set, all input source files must have unique names, excluding extension and path.

- *        This means that input files that are named identically and differ only by their path or extension are invalid when this mode is used.</td>

- *   </tr>

- *   <tr>

- *    <td>Error &quot;<b><tt>Source file does not exist: <i>{X}</i></tt></b>&quot; shown when compiling.</td>

- *    <td>The nominated input source file, specified in the user project's <tt>SRC</tt> parameter, could not be found. Ensure the source file exists and the absolute or

- *        relative path given in the user project makefile is correct and try again.</td>

- *   </tr>

- *   <tr>

- *    <td>Error &quot;<b><tt>Doxygen configuration file <i>{X}</i> does not exist</tt></b>&quot; shown when upgrading a Doxygen configuration file.</td>

- *    <td>The nominated Doxygen configuration file, specified in the user project's <tt>DOXYGEN_CONF</tt> parameter, could not be found. Ensure the configuration file exists

- *        and the absolute or relative path given in the user project makefile is correct and try again, or run the appropriate makefile target to generate a new configuration

- *        file.</td>

- *   </tr>

- *   <tr>

- *    <td>Error &quot;<b><tt>avr-gcc: error: unrecognized option '<i>{X}</i>'</tt></b>&quot; shown when compiling.</td>

- *    <td>An unrecognised option was supplied to the compiler, usually in the <tt>C_FLAGS</tt>, <tt>CPP_FLAGS</tt>, <tt>ASM_FLAGS</tt> or <tt>CC_FLAGS</tt> configuration

- *        options. The nominated compiler switch may be invalid, or unsupported by the version of AVR-GCC on the host system. Remove the unrecognised flag if invalid, or

- *        upgrade to the latest AVR-GCC. If the option is a valid linker option, use the prefix "-Wl," to ensure it is passed to the linker correctly.</td>

- *   </tr>

- *   <tr>

- *    <td>Error &quot;<b><tt>makefile:{X}: {Y}.mk: No such file or directory</tt></b>&quot; shown when make is invoked.</td>

- *    <td>The path to the nominated makefile module was incorrect. This usually indicates that the makefile <tt>LUFA_PATH</tt> option is not set to a valid relative or

- *        absolute path to the LUFA library core.</td>

- *   </tr>

- *   <tr>

- *    <td>Error &quot;<b><tt>fatal error: LUFAConfig.h: No such file or directory</tt></b>&quot; shown when compiling.</td>

- *    <td>The <tt>USE_LUFA_CONFIG_HEADER</tt> compile time option was set in the user project makefile, but the user supplied <tt>LUFAConfig.h</tt> header could not be

- *        found. Ensure that the directory that contains this configuration file is correctly passed to the compiler via the -I switch in the makefile <tt>CC_FLAGS</tt>

- *        parameter.</td>

- *   </tr>

- *   <tr>

- *    <td>Error &quot;<b><tt>ld.exe: section .apitable_trampolines loaded at <i>{X}</i> overlaps section .text</tt></b>&quot; shown when compiling a bootloader.</td>

- *    <td>The bootloader is compiling too large for the given <tt>FLASH_SIZE_KB</tt> and <tt>BOOT_SECTION_SIZE_KB</tt> parameters set in the bootloader makefile. This

- *        usually indicates that these values are incorrect for the specified device the bootloader is targeting. If these values are correct, a newer version of the

- *        compiler may need to be used to ensure that the bootloader is built within the section size constraints of the target device.</td>

- *   </tr>

- *   <tr>

- *    <td>Error &quot;<b><tt>unknown MCU '<i>{X}</i>' specified</tt></b>&quot; shown when compiling.</td>

- *    <td>The specified microcontroller device model name set in the user application's makefile as the <tt>MCU</tt> parameter is incorrect, or unsupported by the

- *        version of the compiler being used. Make sure the model name is correct, or upgrade to the latest Atmel Toolchain to obtain newer device support.</td>

- *   </tr>

- *   <tr>

- *    <td>Error &quot;<b><tt>undefined reference to `<i>{X}</i>'</tt></b>&quot; shown when compiling.</td>

- *    <td>This is usually caused by a missing source file in the user application's <tt>SRC</tt> configuration parameter. If the indicated symbol is one from the LUFA

- *        library, you may be missing a LUFA source makefile module (see \ref Page_BuildModule_SOURCES).</td>

- *   </tr>

- *  </table>

- *

- *  For troubleshooting other errors you encounter, please see \ref Sec_ProjectHelp.

- */

+/** \file
+ *
+ *  This file contains special DoxyGen information for the generation of the main page and other special
+ *  documentation pages. It is not a project source file.
+ */
+
+/** \page Page_BuildSystem The LUFA Build System
+ *
+ *  \section Sec_BuildSystem_Overview Overview of the LUFA Build System
+ *  The LUFA build system is an attempt at making a set of re-usable, modular build make files which
+ *  can be referenced in a LUFA powered project, to minimize the amount of code required in an
+ *  application makefile. The system is written in GNU Make, and each module is independent of
+ *  one-another.
+ *
+ *  For details on the prerequisites needed for Linux and Windows machines to be able to use the LUFA
+ *  build system, see \ref Sec_CompilingApps_Prerequisites.
+ *
+ *  To use a LUFA build system module, simply add an include to your project makefile. All user projects
+ *  should at a minimum include \ref Page_BuildModule_CORE for base functionality:
+ *  \code
+ *  include $(LUFA_PATH)/Build/lufa_core.mk
+ *  \endcode
+ *
+ *  Once included in your project makefile, the associated build module targets will be added to your
+ *  project's build makefile targets automatically. To call a build target, run <tt>make {TARGET_NAME}</tt>
+ *  from the command line, substituting in the appropriate target name.
+ *
+ *  \see \ref Sec_ConfiguringApps_AppMakefileParams for a copy of the sample LUFA project makefile.
+ *
+ *  Each build module may have one or more mandatory parameters (GNU Make variables) which <i>must</i>
+ *  be supplied in the project makefile for the module to work, and one or more optional parameters which
+ *  may be defined and which will assume a sensible default if not.
+ *
+ *  \section SSec_BuildSystem_Modules Available Modules
+ *
+ *  The following modules are included in this LUFA release:
+ *
+ *  \li \subpage Page_BuildModule_ATPROGRAM - Device Programming
+ *  \li \subpage Page_BuildModule_AVRDUDE - Device Programming
+ *  \li \subpage Page_BuildModule_BUILD - Compiling/Assembling/Linking
+ *  \li \subpage Page_BuildModule_CORE - Core Build System Functions
+ *  \li \subpage Page_BuildModule_CPPCHECK - Static Code Analysis
+ *  \li \subpage Page_BuildModule_DFU - Device Programming
+ *  \li \subpage Page_BuildModule_DOXYGEN - Automated Source Code Documentation
+ *  \li \subpage Page_BuildModule_HID - Device Programming
+ *  \li \subpage Page_BuildModule_SOURCES - LUFA Module Source Code Variables
+ *
+ *  If you have problems building using the LUFA build system, see \subpage Page_BuildTroubleshooting for resolution steps.
+ */
+
+ /** \page Page_BuildModule_BUILD The BUILD build module
+ *
+ *  The BUILD LUFA build system module, providing targets for the compilation,
+ *  assembling and linking of an application from source code into binary files
+ *  suitable for programming into a target device, using the GCC compiler.
+ *
+ *  To use this module in your application makefile, add the following code:
+ *  \code
+ *  include $(LUFA_PATH)/Build/lufa_build.mk
+ *  \endcode
+ *
+ *  \section SSec_BuildModule_BUILD_Requirements Requirements
+ *  This module requires the the architecture appropriate binaries of the GCC compiler are available in your
+ *  system's <b>PATH</b> variable. The GCC compiler and associated toolchain is distributed in Atmel AVR Studio
+ *  5.x and Atmel Studio 6.x installation directories, as well as in many third party distribution packages.
+ *
+ *  \section SSec_BuildModule_BUILD_Targets Targets
+ *
+ *  <table>
+ *   <tr>
+ *    <td><tt>size</tt></td>
+ *    <td>Display size of the compiled application FLASH and SRAM segments.</td>
+ *   </tr>
+ *   <tr>
+ *    <td><tt>symbol-sizes</tt></td>
+ *    <td>Display a size-sorted list of symbols from the compiled application, in decimal bytes.</td>
+ *   </tr>
+ *   <tr>
+ *    <td><tt>lib</tt></td>
+ *    <td>Build and archive all source files into a library A binary file.</td>
+ *   </tr>
+ *   <tr>
+ *    <td><tt>all</tt></td>
+ *    <td>Build and link the application into ELF debug and HEX binary files.</td>
+ *   </tr>
+ *   <tr>
+ *    <td><tt>elf</tt></td>
+ *    <td>Build and link the application into an ELF debug file.</td>
+ *   </tr>
+ *   <tr>
+ *    <td><tt>bin</tt></td>
+ *    <td>Build and link the application and produce a BIN binary file.</td>
+ *   </tr>
+ *   <tr>
+ *    <td><tt>hex</tt></td>
+ *    <td>Build and link the application and produce HEX and EEP binary files.</td>
+ *   </tr>
+ *   <tr>
+ *    <td><tt>lss</tt></td>
+ *    <td>Build and link the application and produce a LSS source code/assembly code mixed listing file.</td>
+ *   </tr>
+ *   <tr>
+ *    <td><tt>clean</tt></td>
+ *    <td>Remove all intermediary files and binary output files.</td>
+ *   </tr>
+ *   <tr>
+ *    <td><tt>mostlyclean</tt></td>
+ *    <td>Remove all intermediary files but preserve any binary output files.</td>
+ *   </tr>
+ *   <tr>
+ *    <td><tt><i>&lt;filename&gt;</i>.s</tt></td>
+ *    <td>Create an assembly listing of a given input C/C++ source file.</td>
+ *   </tr>
+ *  </table>
+ *
+ *  \section SSec_BuildModule_BUILD_MandatoryParams Mandatory Parameters
+ *
+ *  <table>
+ *   <tr>
+ *    <td><tt>TARGET</tt></td>
+ *    <td>Name of the application output file prefix (e.g. <tt>TestApplication</tt>).</td>
+ *   </tr>
+ *   <tr>
+ *    <td><tt>ARCH</tt></td>
+ *    <td>Architecture of the target processor (see \ref Page_DeviceSupport).</td>
+ *   </tr>
+ *   <tr>
+ *    <td><tt>MCU</tt></td>
+ *    <td>Name of the Atmel processor model (e.g. <tt>at90usb1287</tt>).</td>
+ *   </tr>
+ *   <tr>
+ *    <td><tt>SRC</tt></td>
+ *    <td>List of relative or absolute paths to the application C (.c), C++ (.cpp) and Assembly (.S) source files.</td>
+ *   </tr>
+ *   <tr>
+ *    <td><tt>F_USB</tt></td>
+ *    <td>Speed in Hz of the input clock frequency to the target's USB controller.</td>
+ *   </tr>
+ *   <tr>
+ *    <td><tt>LUFA_PATH</tt></td>
+ *    <td>Path to the LUFA library core, either relative or absolute (e.g. <tt>../LUFA-000000/LUFA/</tt>).</td>
+ *   </tr>
+ *  </table>
+ *
+ *  \section SSec_BuildModule_BUILD_OptionalParams Optional Parameters
+ *
+ *  <table>
+ *   <tr>
+ *    <td><tt>BOARD</tt></td>
+ *    <td>LUFA board hardware drivers to use (see \ref Page_DeviceSupport).</td>
+ *   </tr>
+ *   <tr>
+ *    <td><tt>OPTIMIZATION</tt></td>
+ *    <td>Optimization level to use when compiling source files (see GCC manual).</td>
+ *   </tr>
+ *   <tr>
+ *    <td><tt>C_STANDARD</tt></td>
+ *    <td>Version of the C standard to apply when compiling C++ source files (see GCC manual).</td>
+ *   </tr>
+ *   <tr>
+ *    <td><tt>CPP_STANDARD</tt></td>
+ *    <td>Version of the C++ standard to apply when compiling C++ source files (see GCC manual).</td>
+ *   </tr>
+ *   <tr>
+ *    <td><tt>DEBUG_FORMAT</tt></td>
+ *    <td>Format of the debug information to embed in the generated object files (see GCC manual).</td>
+ *   </tr>
+ *   <tr>
+ *    <td><tt>DEBUG_LEVEL</tt></td>
+ *    <td>Level of the debugging information to embed in the generated object files (see GCC manual).</td>
+ *   </tr>
+ *   <tr>
+ *    <td><tt>F_CPU</tt></td>
+ *    <td>Speed of the processor CPU clock, in Hz.</td>
+ *   </tr>
+ *   <tr>
+ *    <td><tt>C_FLAGS</tt></td>
+ *    <td>Flags to pass to the C compiler only, after the automatically generated flags.</td>
+ *   </tr>
+ *   <tr>
+ *    <td><tt>CPP_FLAGS</tt></td>
+ *    <td>Flags to pass to the C++ compiler only, after the automatically generated flags.</td>
+ *   </tr>
+ *   <tr>
+ *    <td><tt>ASM_FLAGS</tt></td>
+ *    <td>Flags to pass to the assembler only, after the automatically generated flags.</td>
+ *   </tr>
+ *   <tr>
+ *    <td><tt>CC_FLAGS</tt></td>
+ *    <td>Common flags to pass to the C/C++ compiler and assembler, after the automatically generated flags.</td>
+ *   </tr>
+ *   <tr>
+ *    <td><tt>COMPILER_PATH</tt></td>
+ *    <td>Directory where the C/C++ toolchain is located, if not available in the system <tt>PATH</tt>.</td>
+ *   </tr>
+ *   <tr>
+ *    <td><tt>LD_FLAGS</tt></td>
+ *    <td>Flags to pass to the linker, after the automatically generated flags.</td>
+ *   </tr>
+ *   <tr>
+ *    <td><tt>LINKER_RELAXATIONS</tt></td>
+ *    <td>Enables or disables linker relaxations when linking the application binary. This can reduce the total size
+ *        of the application by replacing full \c CALL instructions with smaller \c RCALL instructions where possible.
+ *        \note On some unpatched versions of binutils, this can cause link failures in some circumstances. If you
+ *              receive a link error <tt>relocation truncated to fit: R_AVR_13_PCREL</tt>, disable this setting.</td>
+ *   </tr>
+ *   <tr>
+ *    <td><tt>OBJDIR</tt></td>
+ *    <td>Directory to place the generated object and dependency files. If set to "." the same folder as the source file will be used.
+ *        \note When this option is enabled, all source filenames <b>must</b> be unique.</td>
+ *   </tr>
+ *   <tr>
+ *    <td><tt>OBJECT_FILES</tt></td>
+ *    <td>List of additional object files that should be linked into the resulting binary.</td>
+ *   </tr>
+ *  </table>
+ *
+ *  \section SSec_BuildModule_BUILD_ProvidedVariables Module Provided Variables
+ *
+ *  <table>
+ *   <tr>
+ *    <td><i>None</i></td>
+ *   </tr>
+ *  </table>
+ *
+ *  \section SSec_BuildModule_BUILD_ProvidedMacros Module Provided Macros
+ *
+ *  <table>
+ *   <tr>
+ *    <td><i>None</i></td>
+ *   </tr>
+ *  </table>
+ */
+
+/** \page Page_BuildModule_CORE The CORE build module
+ *
+ *  The core LUFA build system module, providing common build system help and information targets.
+ *
+ *  To use this module in your application makefile, add the following code:
+ *  \code
+ *  include $(LUFA_PATH)/Build/lufa_core.mk
+ *  \endcode
+ *
+ *  \section SSec_BuildModule_CORE_Requirements Requirements
+ *  This module has no requirements outside a standard *nix shell like environment; the <tt>sh</tt>
+ *  shell, GNU <tt>make</tt> and *nix CoreUtils (<tt>echo</tt>, <tt>printf</tt>, etc.).
+ *
+ *  \section SSec_BuildModule_CORE_Targets Targets
+ *
+ *  <table>
+ *   <tr>
+ *    <td><tt>help</tt></td>
+ *    <td>Display build system help and configuration information.</td>
+ *   </tr>
+ *   <tr>
+ *    <td><tt>list_targets</tt></td>
+ *    <td>List all available build targets from the build system.</td>
+ *   </tr>
+ *   <tr>
+ *    <td><tt>list_modules</tt></td>
+ *    <td>List all available build modules from the build system.</td>
+ *   </tr>
+ *   <tr>
+ *    <td><tt>list_mandatory</tt></td>
+ *    <td>List all mandatory parameters required by the included modules.</td>
+ *   </tr>
+ *   <tr>
+ *    <td><tt>list_optional</tt></td>
+ *    <td>List all optional parameters required by the included modules.</td>
+ *   </tr>
+ *   <tr>
+ *    <td><tt>list_provided</tt></td>
+ *    <td>List all variables provided by the included modules.</td>
+ *   </tr>
+ *   <tr>
+ *    <td><tt>list_macros</tt></td>
+ *    <td>List all macros provided by the included modules.</td>
+ *   </tr>
+ *  </table>
+ *
+ *  \section SSec_BuildModule_CORE_MandatoryParams Mandatory Parameters
+ *
+ *  <table>
+ *   <tr>
+ *    <td><i>None</i></td>
+ *   </tr>
+ *  </table>
+ *
+ *  \section SSec_BuildModule_CORE_OptionalParams Optional Parameters
+ *
+ *  <table>
+ *   <tr>
+ *    <td><i>None</i></td>
+ *   </tr>
+ *  </table>
+ *
+ *  \section SSec_BuildModule_CORE_ProvidedVariables Module Provided Variables
+ *
+ *  <table>
+ *   <tr>
+ *    <td><i>None</i></td>
+ *   </tr>
+ *  </table>
+ *
+ *  \section SSec_BuildModule_CORE_ProvidedMacros Module Provided Macros
+ *
+ *  <table>
+ *   <tr>
+ *    <td><i>None</i></td>
+ *   </tr>
+ *  </table>
+ */
+
+/** \page Page_BuildModule_ATPROGRAM The ATPROGRAM build module
+ *
+ *  The ATPROGRAM programming utility LUFA build system module, providing targets to reprogram an
+ *  Atmel processor FLASH and EEPROM memories with a project's compiled binary output files.
+ *
+ *  To use this module in your application makefile, add the following code:
+ *  \code
+ *  include $(LUFA_PATH)/Build/lufa_atprogram.mk
+ *  \endcode
+ *
+ *  \section SSec_BuildModule_ATPROGRAM_Requirements Requirements
+ *  This module requires the <tt>atprogram.exe</tt> utility to be available in your system's <b>PATH</b>
+ *  variable. The <tt>atprogram.exe</tt> utility is distributed in Atmel AVR Studio 5.x and Atmel Studio 6.x
+ *  inside the application install folder's "\atbackend" subdirectory.
+ *
+ *  \section SSec_BuildModule_ATPROGRAM_Targets Targets
+ *
+ *  <table>
+ *   <tr>
+ *    <td><tt>atprogram</tt></td>
+ *    <td>Program the device FLASH memory with the application's executable data.</td>
+ *   </tr>
+ *   <tr>
+ *    <td><tt>atprogram-ee</tt></td>
+ *    <td>Program the device EEPROM memory with the application's EEPROM data.</td>
+ *   </tr>
+ *  </table>
+ *
+ *  \section SSec_BuildModule_ATPROGRAM_MandatoryParams Mandatory Parameters
+ *
+ *  <table>
+ *   <tr>
+ *    <td><tt>MCU</tt></td>
+ *    <td>Name of the Atmel processor model (e.g. <tt>at90usb1287</tt>).</td>
+ *   </tr>
+ *   <tr>
+ *    <td><tt>TARGET</tt></td>
+ *    <td>Name of the application output file prefix (e.g. <tt>TestApplication</tt>).</td>
+ *   </tr>
+ *  </table>
+ *
+ *  \section SSec_BuildModule_ATPROGRAM_OptionalParams Optional Parameters
+ *
+ *  <table>
+ *   <tr>
+ *    <td><tt>ATPROGRAM_PROGRAMMER</tt></td>
+ *    <td>Name of the Atmel programmer or debugger tool to communicate with (e.g. <tt>jtagice3</tt>).</td>
+ *   </tr>
+ *   <tr>
+ *    <td><tt>ATPROGRAM_INTERFACE</tt></td>
+ *    <td>Name of the programming interface to use when programming the target (e.g. <tt>spi</tt>).</td>
+ *   </tr>
+ *   <tr>
+ *    <td><tt>ATPROGRAM_PORT</tt></td>
+ *    <td>Name of the communication port to use when when programming with a serially connected tool (e.g. <tt>COM2</tt>).</td>
+ *   </tr>
+ *  </table>
+ *
+ *  \section SSec_BuildModule_ATPROGRAM_ProvidedVariables Module Provided Variables
+ *
+ *  <table>
+ *   <tr>
+ *    <td><i>None</i></td>
+ *   </tr>
+ *  </table>
+ *
+ *  \section SSec_BuildModule_ATPROGRAM_ProvidedMacros Module Provided Macros
+ *
+ *  <table>
+ *   <tr>
+ *    <td><i>None</i></td>
+ *   </tr>
+ *  </table>
+ */
+
+/** \page Page_BuildModule_AVRDUDE The AVRDUDE build module
+ *
+ *  The AVRDUDE programming utility LUFA build system module, providing targets to reprogram an
+ *  Atmel processor FLASH and EEPROM memories with a project's compiled binary output files.
+ *
+ *  To use this module in your application makefile, add the following code:
+ *  \code
+ *  include $(LUFA_PATH)/Build/lufa_avrdude.mk
+ *  \endcode
+ *
+ *  \section SSec_BuildModule_AVRDUDE_Requirements Requirements
+ *  This module requires the <tt>avrdude</tt> utility to be available in your system's <b>PATH</b>
+ *  variable. The <tt>avrdude</tt> utility is distributed in the old WinAVR project releases for
+ *  Windows (<a>http://winavr.sourceforge.net</a>) or can be installed on *nix systems via the project's
+ *  source code (<a>https://savannah.nongnu.org/projects/avrdude</a>) or through the package manager.
+ *
+ *  \section SSec_BuildModule_AVRDUDE_Targets Targets
+ *
+ *  <table>
+ *   <tr>
+ *    <td><tt>avrdude</tt></td>
+ *    <td>Program the device FLASH memory with the application's executable data.</td>
+ *   </tr>
+ *   <tr>
+ *    <td><tt>avrdude-ee</tt></td>
+ *    <td>Program the device EEPROM memory with the application's EEPROM data.</td>
+ *   </tr>
+ *  </table>
+ *
+ *  \section SSec_BuildModule_AVRDUDE_MandatoryParams Mandatory Parameters
+ *
+ *  <table>
+ *   <tr>
+ *    <td><tt>MCU</tt></td>
+ *    <td>Name of the Atmel processor model (e.g. <tt>at90usb1287</tt>).</td>
+ *   </tr>
+ *   <tr>
+ *    <td><tt>TARGET</tt></td>
+ *    <td>Name of the application output file prefix (e.g. <tt>TestApplication</tt>).</td>
+ *   </tr>
+ *  </table>
+ *
+ *  \section SSec_BuildModule_AVRDUDE_OptionalParams Optional Parameters
+ *
+ *  <table>
+ *   <tr>
+ *    <td><tt>AVRDUDE_PROGRAMMER</tt></td>
+ *    <td>Name of the programmer or debugger tool to communicate with (e.g. <tt>jtagicemkii</tt>).</td>
+ *   </tr>
+ *   <tr>
+ *    <td><tt>AVRDUDE_PORT</tt></td>
+ *    <td>Name of the communication port to use when when programming with the connected tool (e.g. <tt>COM2</tt>, <tt>/dev/ttyUSB0</tt> or <tt>usb</tt>).</td>
+ *   </tr>
+ *   <tr>
+ *    <td><tt>AVRDUDE_FLAGS</tt></td>
+ *    <td>Additional flags to pass to avrdude when programming, applied after the automatically generated flags.</td>
+ *   </tr>
+ *  </table>
+ *
+ *  \section SSec_BuildModule_AVRDUDE_ProvidedVariables Module Provided Variables
+ *
+ *  <table>
+ *   <tr>
+ *    <td><i>None</i></td>
+ *   </tr>
+ *  </table>
+ *
+ *  \section SSec_BuildModule_AVRDUDE_ProvidedMacros Module Provided Macros
+ *
+ *  <table>
+ *   <tr>
+ *    <td><i>None</i></td>
+ *   </tr>
+ *  </table>
+ */
+
+ /** \page Page_BuildModule_CPPCHECK The CPPCHECK build module
+ *
+ *  The CPPCHECK programming utility LUFA build system module, providing targets to statically
+ *  analyze C and C++ source code for errors and performance/style issues.
+ *
+ *  To use this module in your application makefile, add the following code:
+ *  \code
+ *  include $(LUFA_PATH)/Build/lufa_cppcheck.mk
+ *  \endcode
+ *
+ *  \section SSec_BuildModule_CPPCHECK_Requirements Requirements
+ *  This module requires the <tt>cppcheck</tt> utility to be available in your system's <b>PATH</b>
+ *  variable. The <tt>cppcheck</tt> utility is distributed through the project's home page
+ *  (<a>http://cppcheck.sourceforge.net</a>) for Windows, and can be installed on *nix systems via
+ *  the project's source code or through the package manager.
+ *
+ *  \section SSec_BuildModule_CPPCHECK_Targets Targets
+ *
+ *  <table>
+ *   <tr>
+ *    <td><tt>cppcheck</tt></td>
+ *    <td>Statically analyze the project source code for issues.</td>
+ *   </tr>
+ *   <tr>
+ *    <td><tt>cppcheck-config</tt></td>
+ *    <td>Check the <tt>cppcheck</tt> configuration - scan source code and warn about missing header files and other issues.</td>
+ *   </tr>
+ *  </table>
+ *
+ *  \section SSec_BuildModule_CPPCHECK_MandatoryParams Mandatory Parameters
+ *
+ *  <table>
+ *   <tr>
+ *    <td><tt>SRC</tt></td>
+ *    <td>List of source files to statically analyze.</td>
+ *   </tr>
+ *  </table>
+ *
+ *  \section SSec_BuildModule_CPPCHECK_OptionalParams Optional Parameters
+ *
+ *  <table>
+ *   <tr>
+ *    <td><tt>CPPCHECK_INCLUDES</tt></td>
+ *    <td>Path of extra directories to check when attemting to resolve C/C++ header file includes.</td>
+ *   </tr>
+ *   <tr>
+ *    <td><tt>CPPCHECK_EXCLUDES</tt></td>
+ *    <td>Paths or path fragments to exclude when analyzing.</td>
+ *   </tr>
+ *   <tr>
+ *    <td><tt>CPPCHECK_MSG_TEMPLATE</tt></td>
+ *    <td>Output message template to use when printing errors, warnings and information (see <tt>cppcheck</tt> documentation).</td>
+ *   </tr>
+ *   <tr>
+ *    <td><tt>CPPCHECK_ENABLE</tt></td>
+ *    <td>Analysis rule categories to enable (see <tt>cppcheck</tt> documentation).</td>
+ *   </tr>
+ *   <tr>
+ *    <td><tt>CPPCHECK_SUPPRESS</tt></td>
+ *    <td>Specific analysis rules to suppress (see <tt>cppcheck</tt> documentation).</td>
+ *   </tr>
+ *   <tr>
+ *    <td><tt>CPPCHECK_FAIL_ON_WARNING</tt></td>
+ *    <td>Set to <b>Y</b> to fail the analysis job with an error exit code if warnings are found, <b>N</b> to continue without failing.</td>
+ *   </tr>
+ *   <tr>
+ *    <td><tt>CPPCHECK_QUIET</tt></td>
+ *    <td>Set to <b>Y</b> to suppress all output except warnings and errors, <b>N</b> to show verbose output information.</td>
+ *   </tr>
+ *   <tr>
+ *    <td><tt>CPPCHECK_FLAGS</tt></td>
+ *    <td>Extra flags to pass to <tt>cppcheck</tt>, after the automatically generated flags.</td>
+ *   </tr>
+ *  </table>
+ *
+ *  \section SSec_BuildModule_CPPCHECK_ProvidedVariables Module Provided Variables
+ *
+ *  <table>
+ *   <tr>
+ *    <td><i>None</i></td>
+ *   </tr>
+ *  </table>
+ *
+ *  \section SSec_BuildModule_CPPCHECK_ProvidedMacros Module Provided Macros
+ *
+ *  <table>
+ *   <tr>
+ *    <td><i>None</i></td>
+ *   </tr>
+ *  </table>
+ */
+
+ /** \page Page_BuildModule_DFU The DFU build module
+ *
+ *  The DFU programming utility LUFA build system module, providing targets to reprogram an
+ *  Atmel processor FLASH and EEPROM memories with a project's compiled binary output files.
+ *  This module requires a DFU class bootloader to be running in the target, compatible with
+ *  the DFU bootloader protocol as published by Atmel.
+ *
+ *  To use this module in your application makefile, add the following code:
+ *  \code
+ *  include $(LUFA_PATH)/Build/lufa_dfu.mk
+ *  \endcode
+ *
+ *  \section SSec_BuildModule_DFU_Requirements Requirements
+ *  This module requires either the <tt>batchisp</tt> utility from Atmel's FLIP utility, or the open
+ *  source <tt>dfu-programmer</tt> utility (<a>http://dfu-programmer.sourceforge.net/</a>) to be
+ *  available in your system's <b>PATH</b> variable. On *nix systems the <tt>dfu-programmer</tt> utility
+ *  can be installed via the project's source code or through the package manager.
+ *
+ *  \section SSec_BuildModule_DFU_Targets Targets
+ *
+ *  <table>
+ *   <tr>
+ *    <td><tt>dfu</tt></td>
+ *    <td>Program the device FLASH memory with the application's executable data using <tt>dfu-programmer</tt>.</td>
+ *   </tr>
+ *   <tr>
+ *    <td><tt>dfu-ee</tt></td>
+ *    <td>Program the device EEPROM memory with the application's EEPROM data using <tt>dfu-programmer</tt>.</td>
+ *   </tr>
+ *   <tr>
+ *    <td><tt>flip</tt></td>
+ *    <td>Program the device FLASH memory with the application's executable data using <tt>batchisp</tt>.</td>
+ *   </tr>
+ *   <tr>
+ *    <td><tt>flip-ee</tt></td>
+ *    <td>Program the device EEPROM memory with the application's EEPROM data using <tt>batchisp</tt>.</td>
+ *   </tr>
+ *  </table>
+ *
+ *  \section SSec_BuildModule_DFU_MandatoryParams Mandatory Parameters
+ *
+ *  <table>
+ *   <tr>
+ *    <td><tt>MCU</tt></td>
+ *    <td>Name of the Atmel processor model (e.g. <tt>at90usb1287</tt>).</td>
+ *   </tr>
+ *   <tr>
+ *    <td><tt>TARGET</tt></td>
+ *    <td>Name of the application output file prefix (e.g. <tt>TestApplication</tt>).</td>
+ *   </tr>
+ *  </table>
+ *
+ *  \section SSec_BuildModule_DFU_OptionalParams Optional Parameters
+ *
+ *  <table>
+ *   <tr>
+ *    <td><i>None</i></td>
+ *   </tr>
+ *  </table>
+ *
+ *  \section SSec_BuildModule_DFU_ProvidedVariables Module Provided Variables
+ *
+ *  <table>
+ *   <tr>
+ *    <td><i>None</i></td>
+ *   </tr>
+ *  </table>
+ *
+ *  \section SSec_BuildModule_DFU_ProvidedMacros Module Provided Macros
+ *
+ *  <table>
+ *   <tr>
+ *    <td><i>None</i></td>
+ *   </tr>
+ *  </table>
+ */
+
+ /** \page Page_BuildModule_DOXYGEN The DOXYGEN build module
+ *
+ *  The DOXYGEN code documentation utility LUFA build system module, providing targets to generate
+ *  project HTML and other format documentation from a set of source files that include special
+ *  Doxygen comments.
+ *
+ *  To use this module in your application makefile, add the following code:
+ *  \code
+ *  include $(LUFA_PATH)/Build/lufa_doxygen.mk
+ *  \endcode
+ *
+ *  \section SSec_BuildModule_DOXYGEN_Requirements Requirements
+ *  This module requires the <tt>doxygen</tt> utility from the Doxygen website
+ *  (<a>http://www.doxygen.org/</a>) to be available in your system's <b>PATH</b> variable. On *nix
+ *  systems the <tt>doxygen</tt> utility can be installed via the project's source code or through
+ *  the package manager.
+ *
+ *  \section SSec_BuildModule_DOXYGEN_Targets Targets
+ *
+ *  <table>
+ *   <tr>
+ *    <td><tt>doxygen</tt></td>
+ *    <td>Generate project documentation.</td>
+ *   </tr>
+ *   <tr>
+ *    <td><tt>doxygen_create</tt></td>
+ *    <td>Create a new Doxygen configuration file using the latest template.</td>
+ *   </tr>
+ *   <tr>
+ *    <td><tt>doxygen_upgrade</tt></td>
+ *    <td>Upgrade an existing Doxygen configuration file to the latest template</td>
+ *   </tr>
+ *  </table>
+ *
+ *  \section SSec_BuildModule_DOXYGEN_MandatoryParams Mandatory Parameters
+ *
+ *  <table>
+ *   <tr>
+ *    <td><tt>LUFA_PATH</tt></td>
+ *    <td>Path to the LUFA library core, either relative or absolute (e.g. <tt>../LUFA-000000/LUFA/</tt>).</td>
+ *   </tr>
+ *  </table>
+ *
+ *  \section SSec_BuildModule_DOXYGEN_OptionalParams Optional Parameters
+ *
+ *  <table>
+ *   <tr>
+ *    <td><tt>DOXYGEN_CONF</tt></td>
+ *    <td>Name and path of the base Doxygen configuration file for the project.</td>
+ *   </tr>
+ *   <tr>
+ *    <td><tt>DOXYGEN_FAIL_ON_WARNING</tt></td>
+ *    <td>Set to <b>Y</b> to fail the generation with an error exit code if warnings are found other than unsupported configuration parameters, <b>N</b> to continue without failing.</td>
+ *   </tr>
+ *   <tr>
+ *    <td><tt>DOXYGEN_OVERRIDE_PARAMS</tt></td>
+ *    <td>Extra Doxygen configuration parameters to apply, overriding the corresponding config entry in the project's configuration file (e.g. <tt>QUIET=YES</tt>).</td>
+ *   </tr>
+ *  </table>
+ *
+ *  \section SSec_BuildModule_DOXYGEN_ProvidedVariables Module Provided Variables
+ *
+ *  <table>
+ *   <tr>
+ *    <td><i>None</i></td>
+ *   </tr>
+ *  </table>
+ *
+ *  \section SSec_BuildModule_DOXYGEN_ProvidedMacros Module Provided Macros
+ *
+ *  <table>
+ *   <tr>
+ *    <td><i>None</i></td>
+ *   </tr>
+ *  </table>
+ */
+
+ /** \page Page_BuildModule_HID The HID build module
+ *
+ *  The HID programming utility LUFA build system module, providing targets to reprogram an
+ *  Atmel processor's FLASH memory with a project's compiled binary output file. This module
+ *  requires a HID class bootloader to be running in the target, using a protocol compatible
+ *  with the PJRC "HalfKay" protocol (<a>http://www.pjrc.com/teensy/halfkay_protocol.html</a>).
+ *
+ *  To use this module in your application makefile, add the following code:
+ *  \code
+ *  include $(LUFA_PATH)/Build/lufa_hid.mk
+ *  \endcode
+ *
+ *  \section SSec_BuildModule_HID_Requirements Requirements
+ *  This module requires either the <tt>hid_bootloader_cli</tt> utility from the included LUFA HID
+ *  class bootloader API subdirectory, or the <tt>teensy_loader_cli</tt> utility from PJRC
+ *  (<a>http://www.pjrc.com/teensy/loader_cli.html</a>) to be available in your system's <b>PATH</b>
+ *  variable.
+ *
+ *  \section SSec_BuildModule_HID_Targets Targets
+ *
+ *  <table>
+ *   <tr>
+ *    <td><tt>hid</tt></td>
+ *    <td>Program the device FLASH memory with the application's executable data using <tt>hid_bootloader_cli</tt>.</td>
+ *   </tr>
+ *   <tr>
+ *    <td><tt>hid-ee</tt></td>
+ *    <td>Program the device EEPROM memory with the application's EEPROM data using <tt>hid_bootloader_cli</tt> and
+ *        a temporary AVR application programmed into the target's FLASH.
+ *        \note This will erase the currently loaded application in the target.</td>
+ *   </tr>
+ *   <tr>
+ *    <td><tt>teensy</tt></td>
+ *    <td>Program the device FLASH memory with the application's executable data using <tt>teensy_loader_cli</tt>.</td>
+ *   </tr>
+ *   <tr>
+ *    <td><tt>teensy-ee</tt></td>
+ *    <td>Program the device EEPROM memory with the application's EEPROM data using <tt>teensy_loader_cli</tt> and
+ *        a temporary AVR application programmed into the target's FLASH.
+ *        \note This will erase the currently loaded application in the target.</td>
+ *   </tr>
+ *  </table>
+ *
+ *  \section SSec_BuildModule_HID_MandatoryParams Mandatory Parameters
+ *
+ *  <table>
+ *   <tr>
+ *    <td><tt>MCU</tt></td>
+ *    <td>Name of the Atmel processor model (e.g. <tt>at90usb1287</tt>).</td>
+ *   </tr>
+ *   <tr>
+ *    <td><tt>TARGET</tt></td>
+ *    <td>Name of the application output file prefix (e.g. <tt>TestApplication</tt>).</td>
+ *   </tr>
+ *  </table>
+ *
+ *  \section SSec_BuildModule_HID_OptionalParams Optional Parameters
+ *
+ *  <table>
+ *   <tr>
+ *    <td><i>None</i></td>
+ *   </tr>
+ *  </table>
+ *
+ *  \section SSec_BuildModule_HID_ProvidedVariables Module Provided Variables
+ *
+ *  <table>
+ *   <tr>
+ *    <td><i>None</i></td>
+ *   </tr>
+ *  </table>
+ *
+ *  \section SSec_BuildModule_HID_ProvidedMacros Module Provided Macros
+ *
+ *  <table>
+ *   <tr>
+ *    <td><i>None</i></td>
+ *   </tr>
+ *  </table>
+ */
+
+ /** \page Page_BuildModule_SOURCES The SOURCES build module
+ *
+ *  The SOURCES LUFA build system module, providing variables listing the various LUFA source files
+ *  required to be build by a project for a given LUFA module. This module gives a way to reference
+ *  LUFA source files symbolically, so that changes to the library structure do not break the library
+ *  makefile.
+ *
+ *  To use this module in your application makefile, add the following code:
+ *  \code
+ *  include $(LUFA_PATH)/Build/lufa_sources.mk
+ *  \endcode
+ *
+ *  \section SSec_BuildModule_SOURCES_Requirements Requirements
+ *  None.
+ *
+ *  \section SSec_BuildModule_SOURCES_Targets Targets
+ *
+ *  <table>
+ *   <tr>
+ *    <td><i>None</i></td>
+ *   </tr>
+ *  </table>
+ *
+ *  \section SSec_BuildModule_SOURCES_MandatoryParams Mandatory Parameters
+ *
+ *  <table>
+ *   <tr>
+ *    <td><tt>LUFA_PATH</tt></td>
+ *    <td>Path to the LUFA library core, either relative or absolute (e.g. <tt>../LUFA-000000/LUFA/</tt>).</td>
+ *   </tr>
+ *   <tr>
+ *    <td><tt>ARCH</tt></td>
+ *    <td>Architecture of the target processor (see \ref Page_DeviceSupport).</td>
+ *   </tr>
+ *  </table>
+ *
+ *  \section SSec_BuildModule_SOURCES_OptionalParams Optional Parameters
+ *
+ *  <table>
+ *   <tr>
+ *    <td><i>None</i></td>
+ *   </tr>
+ *  </table>
+ *
+ *  \section SSec_BuildModule_SOURCES_ProvidedVariables Module Provided Variables
+ *
+ *  <table>
+ *   <tr>
+ *    <td><tt>LUFA_SRC_USB</tt></td>
+ *    <td>List of LUFA USB driver source files.</td>
+ *   </tr>
+ *   <tr>
+ *    <td><tt>LUFA_SRC_USBCLASS</tt></td>
+ *    <td>List of LUFA USB Class driver source files.</td>
+ *   </tr>
+ *   <tr>
+ *    <td><tt>LUFA_SRC_TEMPERATURE</tt></td>
+ *    <td>List of LUFA temperature sensor driver source files.</td>
+ *   </tr>
+ *   <tr>
+ *    <td><tt>LUFA_SRC_SERIAL</tt></td>
+ *    <td>List of LUFA Serial U(S)ART driver source files.</td>
+ *   </tr>
+ *   <tr>
+ *    <td><tt>LUFA_SRC_TWI</tt></td>
+ *    <td>List of LUFA TWI driver source files.</td>
+ *   </tr>
+ *   <tr>
+ *    <td><tt>LUFA_SRC_PLATFORM</tt></td>
+ *    <td>List of LUFA architecture specific platform management source files.</td>
+ *   </tr>
+ *  </table>
+ *
+ *  \section SSec_BuildModule_SOURCES_ProvidedMacros Module Provided Macros
+ *
+ *  <table>
+ *   <tr>
+ *    <td><i>None</i></td>
+ *   </tr>
+ *  </table>
+ */
+
+/** \page Page_BuildTroubleshooting Troubleshooting Information
+ *
+ *  LUFA uses a lot of advanced features of the AVR-GCC compiler, linker, and surrounding binaries. This can sometimes lead to problems compiling applications if one of these
+ *  features is buggy in the version of the tools used in a build environment. Missing utilities and incorrectly set makefile configuration options can also result in different
+ *  errors being produced when compilation or other operations are attempted. The table below lists a set of commonly encountered errors and their resolutions.
+ *
+ *  <table>
+ *    <tr>
+ *    <th>Problem</th>
+ *    <th>Resolution</th>
+ *   </tr>
+ *   <tr>
+ *    <td>Error &quot;<b><tt>relocation truncated to fit: R_AVR_13_PCREL against symbol <i>{X}</i></tt></b>&quot; shown when compiling.</td>
+ *    <td>Try compiling with the setting <tt>LINKER_RELAXATIONS=N</tt> in your LUFA Build System 2.0 makefile, or remove the line <tt>-Wl,--relax</tt>
+ *        from other makefiles. Alternatively, make sure you have the latest version of the Atmel Toolchain installed for your system.</td>
+ *   </tr>
+ *   <tr>
+ *    <td>Error &quot;<b><tt>error: ld terminated with signal 11 [Segmentation fault]</tt></b>&quot; shown when compiling.</td>
+ *    <td>Try compiling with the setting <tt>DEBUG_LEVEL=2</tt> in your LUFA Build System 2.0 makefile, or make sure you are using <tt>binutils</tt> version 2.22 or later.</td>
+ *   </tr>
+ *   <tr>
+ *    <td>Error &quot;<b><tt>EMERGENCY ABORT: INFINITE RECURSION DETECTED</tt></b>&quot; shown when compiling.</td>
+ *    <td>Make sure you are using an up to date version of GNU Make when compiling. This error is a safety system added to the mid-level makefiles, to prevent an issue with
+ *        GNU make or other variants of Make causing an infinitely recursive build.</td>
+ *   </tr>
+ *   <tr>
+ *    <td>Error &quot;<b><tt>Unsupported architecture &quot;<i>{X}</i>&quot;</tt></b>&quot; shown when compiling.</td>
+ *    <td>Ensure your makefile's <tt>ARCH</tt> setting is set to one of the architecture names (case-sensitive) supported by the version of LUFA you are compiling against.</td>
+ *   </tr>
+ *   <tr>
+ *    <td>Error &quot;<b><tt>Makefile <i>{X}</i> value not set</tt></b>&quot; shown when compiling.</td>
+ *    <td>The specified Makefile value was not configured in your project's makefile or on the command line, and the nominated setting is required by one or more LUFA
+ *        build system modules. Define the value in your project makefile and try again.</td>
+ *   </tr>
+ *   <tr>
+ *    <td>Error &quot;<b><tt>Makefile <i>{X}</i> option cannot be blank</tt></b>&quot; shown when compiling.</td>
+ *    <td>The specified Makefile value was configured in your project's makefile or on the command line, but was set to an empty value. For the nominated configuration
+ *        option, an empty value is not allowed. Define the nominated setting to a correct non-blank value and try again.</td>
+ *   </tr>
+ *   <tr>
+ *    <td>Error &quot;<b><tt>Makefile <i>{X}</i> option must be Y or N</tt></b>&quot; shown when compiling.</td>
+ *    <td>The specified Makefile value was configured in your project's makefile or on the command line, but was set to a value other than a Y (for "Yes") or "N" (for "No").
+ *        This configuration option is required to be one of the aforementioned boolean values, and other values are invalid. Set this option to either Y or N and try again.</td>
+ *   </tr>
+ *   <tr>
+ *    <td>Error &quot;<b><tt>Unknown input source file formats: <i>{X}</i></tt></b>&quot; shown when compiling.</td>
+ *    <td>The nominated source files, specified in your project's makefile in the <tt>SRC</tt> configuration option, has an extension that the LUFA build system does not
+ *        recognise. The file extensions are case sensitive, and must be one of the supported formats (<tt>*.c</tt>, <tt>*.cpp</tt> or <tt>*.S</tt>).</td>
+ *   </tr>
+ *   <tr>
+ *    <td>Error &quot;<b><tt>Cannot build with OBJDIR parameter set - one or more object file name is not unique</tt></b>&quot; shown when compiling.</td>
+ *    <td>When a project is built with a non-empty <tt>OBJDIR</tt> object directory name set, all input source files must have unique names, excluding extension and path.
+ *        This means that input files that are named identically and differ only by their path or extension are invalid when this mode is used.</td>
+ *   </tr>
+ *   <tr>
+ *    <td>Error &quot;<b><tt>Source file does not exist: <i>{X}</i></tt></b>&quot; shown when compiling.</td>
+ *    <td>The nominated input source file, specified in the user project's <tt>SRC</tt> parameter, could not be found. Ensure the source file exists and the absolute or
+ *        relative path given in the user project makefile is correct and try again.</td>
+ *   </tr>
+ *   <tr>
+ *    <td>Error &quot;<b><tt>Doxygen configuration file <i>{X}</i> does not exist</tt></b>&quot; shown when upgrading a Doxygen configuration file.</td>
+ *    <td>The nominated Doxygen configuration file, specified in the user project's <tt>DOXYGEN_CONF</tt> parameter, could not be found. Ensure the configuration file exists
+ *        and the absolute or relative path given in the user project makefile is correct and try again, or run the appropriate makefile target to generate a new configuration
+ *        file.</td>
+ *   </tr>
+ *   <tr>
+ *    <td>Error &quot;<b><tt>avr-gcc: error: unrecognized option '<i>{X}</i>'</tt></b>&quot; shown when compiling.</td>
+ *    <td>An unrecognised option was supplied to the compiler, usually in the <tt>C_FLAGS</tt>, <tt>CPP_FLAGS</tt>, <tt>ASM_FLAGS</tt> or <tt>CC_FLAGS</tt> configuration
+ *        options. The nominated compiler switch may be invalid, or unsupported by the version of AVR-GCC on the host system. Remove the unrecognised flag if invalid, or
+ *        upgrade to the latest AVR-GCC. If the option is a valid linker option, use the prefix "-Wl," to ensure it is passed to the linker correctly.</td>
+ *   </tr>
+ *   <tr>
+ *    <td>Error &quot;<b><tt>makefile:{X}: {Y}.mk: No such file or directory</tt></b>&quot; shown when make is invoked.</td>
+ *    <td>The path to the nominated makefile module was incorrect. This usually indicates that the makefile <tt>LUFA_PATH</tt> option is not set to a valid relative or
+ *        absolute path to the LUFA library core.</td>
+ *   </tr>
+ *   <tr>
+ *    <td>Error &quot;<b><tt>fatal error: LUFAConfig.h: No such file or directory</tt></b>&quot; shown when compiling.</td>
+ *    <td>The <tt>USE_LUFA_CONFIG_HEADER</tt> compile time option was set in the user project makefile, but the user supplied <tt>LUFAConfig.h</tt> header could not be
+ *        found. Ensure that the directory that contains this configuration file is correctly passed to the compiler via the -I switch in the makefile <tt>CC_FLAGS</tt>
+ *        parameter.</td>
+ *   </tr>
+ *   <tr>
+ *    <td>Error &quot;<b><tt>ld.exe: section .apitable_trampolines loaded at <i>{X}</i> overlaps section .text</tt></b>&quot; shown when compiling a bootloader.</td>
+ *    <td>The bootloader is compiling too large for the given <tt>FLASH_SIZE_KB</tt> and <tt>BOOT_SECTION_SIZE_KB</tt> parameters set in the bootloader makefile. This
+ *        usually indicates that these values are incorrect for the specified device the bootloader is targeting. If these values are correct, a newer version of the
+ *        compiler may need to be used to ensure that the bootloader is built within the section size constraints of the target device.</td>
+ *   </tr>
+ *   <tr>
+ *    <td>Error &quot;<b><tt>unknown MCU '<i>{X}</i>' specified</tt></b>&quot; shown when compiling.</td>
+ *    <td>The specified microcontroller device model name set in the user application's makefile as the <tt>MCU</tt> parameter is incorrect, or unsupported by the
+ *        version of the compiler being used. Make sure the model name is correct, or upgrade to the latest Atmel Toolchain to obtain newer device support.</td>
+ *   </tr>
+ *   <tr>
+ *    <td>Error &quot;<b><tt>undefined reference to `<i>{X}</i>'</tt></b>&quot; shown when compiling.</td>
+ *    <td>This is usually caused by a missing source file in the user application's <tt>SRC</tt> configuration parameter. If the indicated symbol is one from the LUFA
+ *        library, you may be missing a LUFA source makefile module (see \ref Page_BuildModule_SOURCES).</td>
+ *   </tr>
+ *  </table>
+ *
+ *  For troubleshooting other errors you encounter, please see \ref Sec_ProjectHelp.
+ */
diff --git a/tmk_core/protocol/lufa/LUFA-git/LUFA/StudioIntegration/Docbook/mshelp/placeholder.txt b/tmk_core/protocol/lufa/LUFA-git/LUFA/StudioIntegration/Docbook/mshelp/placeholder.txt
index 486e9a4270..a34fd58dfa 100644
--- a/tmk_core/protocol/lufa/LUFA-git/LUFA/StudioIntegration/Docbook/mshelp/placeholder.txt
+++ b/tmk_core/protocol/lufa/LUFA-git/LUFA/StudioIntegration/Docbook/mshelp/placeholder.txt
@@ -1 +1 @@
-Copy the Microsoft HV1 Docbook transform contents into this directory (i.e. with the XSLT files in the current folder). The HV1 transform proposal can be found at http://sourceforge.net/tracker/?func=detail&aid=3610290&group_id=21935&atid=373750 .

+Copy the Microsoft HV1 Docbook transform contents into this directory (i.e. with the XSLT files in the current folder). The HV1 transform proposal can be found at http://sourceforge.net/tracker/?func=detail&aid=3610290&group_id=21935&atid=373750 .
diff --git a/tmk_core/protocol/lufa/LUFA-git/LUFA/StudioIntegration/Docbook/placeholder.txt b/tmk_core/protocol/lufa/LUFA-git/LUFA/StudioIntegration/Docbook/placeholder.txt
index c017acfd75..dd69b7e0bd 100644
--- a/tmk_core/protocol/lufa/LUFA-git/LUFA/StudioIntegration/Docbook/placeholder.txt
+++ b/tmk_core/protocol/lufa/LUFA-git/LUFA/StudioIntegration/Docbook/placeholder.txt
@@ -1 +1 @@
-Copy the Docbook XSLT docbook-xsl-1.78.1 release contents into this directory (i.e. with the root Docbook files in the current folder). The Docbook releases can be found at http://sourceforge.net/projects/docbook/files/docbook-xsl/ .

+Copy the Docbook XSLT docbook-xsl-1.78.1 release contents into this directory (i.e. with the root Docbook files in the current folder). The Docbook releases can be found at http://sourceforge.net/projects/docbook/files/docbook-xsl/ .
diff --git a/tmk_core/protocol/lufa/LUFA-git/LUFA/StudioIntegration/HV1/lufa_hv1_transform.xslt b/tmk_core/protocol/lufa/LUFA-git/LUFA/StudioIntegration/HV1/lufa_hv1_transform.xslt
index ee8a38340d..8aa4a9413e 100644
--- a/tmk_core/protocol/lufa/LUFA-git/LUFA/StudioIntegration/HV1/lufa_hv1_transform.xslt
+++ b/tmk_core/protocol/lufa/LUFA-git/LUFA/StudioIntegration/HV1/lufa_hv1_transform.xslt
@@ -1,45 +1,45 @@
-<!--

-             LUFA Library

-     Copyright (C) Dean Camera, 2013.

-

-  dean [at] fourwalledcubicle [dot] com

-           www.lufa-lib.org

--->

-

-<!-- Docbook XML to Microsoft Help Viewer 1.0 transform file -->

-

-<xsl:stylesheet xmlns:xsl="http://www.w3.org/1999/XSL/Transform" version="1.0">

-

-	<xsl:import href="../Docbook/mshelp/docbook.xsl"/>

-

-	<xsl:output method="xml" indent="no"/>

-

-	<xsl:template match="emphasis[@role = 'keyword' or @role = 'keywordtype' or @role = 'keywordflow']">

-		<span class="hl-keyword" style="color: #0079C1">

-			<xsl:apply-templates/>

-		</span>

-	</xsl:template>

-

-	<xsl:template match="emphasis[@role = 'stringliteral' or @role = 'charliteral']">

-		<span class="hl-string" style="color: #800000">

-			<xsl:apply-templates/>

-		</span>

-	</xsl:template>

-

-	<xsl:template match="emphasis[@role = 'comment']">

-		<em class="hl-comment" style="color: #008000">

-			<xsl:apply-templates/>

-		</em>

-	</xsl:template>

-

-	<xsl:template match="emphasis[@role = 'preprocessor']">

-		<span class="hl-preprocessor" style="color: #A000A0">

-			<xsl:apply-templates/>

-		</span>

-	</xsl:template>

-

-	<xsl:template match="emphasis[@role = 'normal' and ancestor::programlisting]">

-		<xsl:apply-templates />

-	</xsl:template>

-

-</xsl:stylesheet>

+<!--
+             LUFA Library
+     Copyright (C) Dean Camera, 2013.
+
+  dean [at] fourwalledcubicle [dot] com
+           www.lufa-lib.org
+-->
+
+<!-- Docbook XML to Microsoft Help Viewer 1.0 transform file -->
+
+<xsl:stylesheet xmlns:xsl="http://www.w3.org/1999/XSL/Transform" version="1.0">
+
+	<xsl:import href="../Docbook/mshelp/docbook.xsl"/>
+
+	<xsl:output method="xml" indent="no"/>
+
+	<xsl:template match="emphasis[@role = 'keyword' or @role = 'keywordtype' or @role = 'keywordflow']">
+		<span class="hl-keyword" style="color: #0079C1">
+			<xsl:apply-templates/>
+		</span>
+	</xsl:template>
+
+	<xsl:template match="emphasis[@role = 'stringliteral' or @role = 'charliteral']">
+		<span class="hl-string" style="color: #800000">
+			<xsl:apply-templates/>
+		</span>
+	</xsl:template>
+
+	<xsl:template match="emphasis[@role = 'comment']">
+		<em class="hl-comment" style="color: #008000">
+			<xsl:apply-templates/>
+		</em>
+	</xsl:template>
+
+	<xsl:template match="emphasis[@role = 'preprocessor']">
+		<span class="hl-preprocessor" style="color: #A000A0">
+			<xsl:apply-templates/>
+		</span>
+	</xsl:template>
+
+	<xsl:template match="emphasis[@role = 'normal' and ancestor::programlisting]">
+		<xsl:apply-templates />
+	</xsl:template>
+
+</xsl:stylesheet>
diff --git a/tmk_core/protocol/lufa/LUFA-git/LUFA/StudioIntegration/HV1/lufa_studio_help_styling.css b/tmk_core/protocol/lufa/LUFA-git/LUFA/StudioIntegration/HV1/lufa_studio_help_styling.css
index 49eb7e9706..0b6ccbd8c1 100644
--- a/tmk_core/protocol/lufa/LUFA-git/LUFA/StudioIntegration/HV1/lufa_studio_help_styling.css
+++ b/tmk_core/protocol/lufa/LUFA-git/LUFA/StudioIntegration/HV1/lufa_studio_help_styling.css
@@ -1,53 +1,53 @@
-/*

-             LUFA Library

-     Copyright (C) Dean Camera, 2013.

-

-  dean [at] fourwalledcubicle [dot] com

-           www.lufa-lib.org

-*/

-

-.programlisting {

- 	display: block;

- 	margin-left: 15px;

- 	padding: 10px;

- 	background-color: #f4f4f4;

- 	border: 1px solid #aaaaaa;

- 	font-family: "Consolas", "Courier New", sans-serif;

- }

-

- code {

- 	background-color: #f4f4f4;

- 	font-family: "Consolas", "Courier New", sans-serif;

- }

-

-.note, .warning, .tip {

-	display: block;

- 	margin-left: 15px;

- 	padding-left: 10px;

- 	padding-bottom: 5px;

- 	background-color: #f4f4f4;

- 	border: 1px solid #aaaaaa;

-}

-

-table {

-	border: 1px solid #aaaaaa;

-	border-collapse: collapse;

-	margin-left: 15px;

-	font-size: 10pt;

-}

-

-table thead {

- 	background-color: #f4f4f4;

-}

-

-table thead th {

-	padding: 5px;

-}

-

-table tbody td {

-	padding: 5px;

-}

-

-ul {

-	padding-left: 20px;

-}

+/*
+             LUFA Library
+     Copyright (C) Dean Camera, 2013.
+
+  dean [at] fourwalledcubicle [dot] com
+           www.lufa-lib.org
+*/
+
+.programlisting {
+ 	display: block;
+ 	margin-left: 15px;
+ 	padding: 10px;
+ 	background-color: #f4f4f4;
+ 	border: 1px solid #aaaaaa;
+ 	font-family: "Consolas", "Courier New", sans-serif;
+ }
+
+ code {
+ 	background-color: #f4f4f4;
+ 	font-family: "Consolas", "Courier New", sans-serif;
+ }
+
+.note, .warning, .tip {
+	display: block;
+ 	margin-left: 15px;
+ 	padding-left: 10px;
+ 	padding-bottom: 5px;
+ 	background-color: #f4f4f4;
+ 	border: 1px solid #aaaaaa;
+}
+
+table {
+	border: 1px solid #aaaaaa;
+	border-collapse: collapse;
+	margin-left: 15px;
+	font-size: 10pt;
+}
+
+table thead {
+ 	background-color: #f4f4f4;
+}
+
+table thead th {
+	padding: 5px;
+}
+
+table tbody td {
+	padding: 5px;
+}
+
+ul {
+	padding-left: 20px;
+}
diff --git a/tmk_core/protocol/lufa/LUFA-git/LUFA/StudioIntegration/VSIX/[Content_Types].xml b/tmk_core/protocol/lufa/LUFA-git/LUFA/StudioIntegration/VSIX/[Content_Types].xml
index 05ef8b6ba4..112d169942 100644
--- a/tmk_core/protocol/lufa/LUFA-git/LUFA/StudioIntegration/VSIX/[Content_Types].xml
+++ b/tmk_core/protocol/lufa/LUFA-git/LUFA/StudioIntegration/VSIX/[Content_Types].xml
@@ -1,13 +1,13 @@
-<Types xmlns="http://schemas.openxmlformats.org/package/2006/content-types">

-	<Default Extension="vsixmanifest" ContentType="text/xml"/>

-	<Default Extension="cache" ContentType="text/xml"/>

-	<Default Extension="png" ContentType="application/octet-stream"/>

-	<Default Extension="txt" ContentType="text/plain"/>

-	<Default Extension="xml" ContentType="text/xml"/>

-	<Default Extension="zip" ContentType="application/octet-stream"/>

-	<Default Extension="dll" ContentType="application/octet-stream" />

-	<Default Extension="pkgdef" ContentType="text/plain" />

-	<Default Extension="htm" ContentType="text/html" />

-	<Default Extension="msha" ContentType="text/html" />

-	<Default Extension="mshc" ContentType="application/octet-stream"/>

-</Types>

+<Types xmlns="http://schemas.openxmlformats.org/package/2006/content-types">
+	<Default Extension="vsixmanifest" ContentType="text/xml"/>
+	<Default Extension="cache" ContentType="text/xml"/>
+	<Default Extension="png" ContentType="application/octet-stream"/>
+	<Default Extension="txt" ContentType="text/plain"/>
+	<Default Extension="xml" ContentType="text/xml"/>
+	<Default Extension="zip" ContentType="application/octet-stream"/>
+	<Default Extension="dll" ContentType="application/octet-stream" />
+	<Default Extension="pkgdef" ContentType="text/plain" />
+	<Default Extension="htm" ContentType="text/html" />
+	<Default Extension="msha" ContentType="text/html" />
+	<Default Extension="mshc" ContentType="application/octet-stream"/>
+</Types>
diff --git a/tmk_core/protocol/lufa/LUFA-git/LUFA/StudioIntegration/VSIX/asf-manifest.xml b/tmk_core/protocol/lufa/LUFA-git/LUFA/StudioIntegration/VSIX/asf-manifest.xml
index 794fd689e1..bd969518a1 100644
--- a/tmk_core/protocol/lufa/LUFA-git/LUFA/StudioIntegration/VSIX/asf-manifest.xml
+++ b/tmk_core/protocol/lufa/LUFA-git/LUFA/StudioIntegration/VSIX/asf-manifest.xml
@@ -1,18 +1,18 @@
-<AsfContentProvider Version="1.0.0">

-	<Identifier Id="0e160d5c-e331-48d9-850b-e0387912171b">

-		<Org>FourWalledCubicle</Org>

-		<ShortName>LUFA</ShortName>

-		<Author>Dean Camera</Author>

-		<Description/>

-		<FollowFolderStructure>True</FollowFolderStructure>

-	</Identifier>

-	<AsfContent Type="zip" Path="contents.zip">

-		<Content>

-			<Version>0</Version>

-			<HelpURL/>

-			<Locator/>

-			<DbXMLPath>content.xml.cache</DbXMLPath>

-			<Description/>

-		</Content>

-	</AsfContent>

-</AsfContentProvider>

+<AsfContentProvider Version="1.0.0">
+	<Identifier Id="0e160d5c-e331-48d9-850b-e0387912171b">
+		<Org>FourWalledCubicle</Org>
+		<ShortName>LUFA</ShortName>
+		<Author>Dean Camera</Author>
+		<Description/>
+		<FollowFolderStructure>True</FollowFolderStructure>
+	</Identifier>
+	<AsfContent Type="zip" Path="contents.zip">
+		<Content>
+			<Version>0</Version>
+			<HelpURL/>
+			<Locator/>
+			<DbXMLPath>content.xml.cache</DbXMLPath>
+			<Description/>
+		</Content>
+	</AsfContent>
+</AsfContentProvider>
diff --git a/tmk_core/protocol/lufa/LUFA-git/LUFA/StudioIntegration/VSIX/extension.vsixmanifest b/tmk_core/protocol/lufa/LUFA-git/LUFA/StudioIntegration/VSIX/extension.vsixmanifest
index ea6edeb258..8475017443 100644
--- a/tmk_core/protocol/lufa/LUFA-git/LUFA/StudioIntegration/VSIX/extension.vsixmanifest
+++ b/tmk_core/protocol/lufa/LUFA-git/LUFA/StudioIntegration/VSIX/extension.vsixmanifest
@@ -1,33 +1,33 @@
-<?xml version="1.0" encoding="utf-8"?>

-

-<Vsix xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:xsd="http://www.w3.org/2001/XMLSchema" Version="1.0.0" xmlns="http://schemas.microsoft.com/developer/vsx-schema/2010">

-	<Identifier Id="FourWalledCubicle.LUFA.0e160d5c-e331-48d9-850b-e0387912171b">

-		<Name>LUFA Library</Name>

-		<Author>Dean Camera</Author>

-		<Version>0</Version>

-		<MoreInfoUrl>http://www.lufa-lib.org</MoreInfoUrl>

-		<Description xml:space="preserve">LUFA, the Lightweight USB Framework for AVRs.</Description>

-

-		<License>License.txt</License>

-		<Icon>LUFA_thumb.png</Icon>

-		<PreviewImage>LUFA.png</PreviewImage>

-

-		<SupportedProducts>

-			<IsolatedShell Version="6.1">AtmelStudio</IsolatedShell>

-			<IsolatedShell Version="6.2">AtmelStudio</IsolatedShell>

-		</SupportedProducts>

-

-		<SupportedFrameworkRuntimeEdition MinVersion="4.0" MaxVersion="4.5"/>

-		<Locale>1033</Locale>

-

-	    <AllUsers>false</AllUsers>

-	</Identifier>

-

-	<References/>

-

-	<Content>

-		<VsPackage>LUFA.pkgdef</VsPackage>

-	    <CustomExtension Type="MSHelp">helpcontentsetup.msha</CustomExtension>

-		<CustomExtension Type="asf-manifest">asf-manifest.xml</CustomExtension>

-	</Content>

-</Vsix>

+<?xml version="1.0" encoding="utf-8"?>
+
+<Vsix xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:xsd="http://www.w3.org/2001/XMLSchema" Version="1.0.0" xmlns="http://schemas.microsoft.com/developer/vsx-schema/2010">
+	<Identifier Id="FourWalledCubicle.LUFA.0e160d5c-e331-48d9-850b-e0387912171b">
+		<Name>LUFA Library</Name>
+		<Author>Dean Camera</Author>
+		<Version>0</Version>
+		<MoreInfoUrl>http://www.lufa-lib.org</MoreInfoUrl>
+		<Description xml:space="preserve">LUFA, the Lightweight USB Framework for AVRs.</Description>
+
+		<License>License.txt</License>
+		<Icon>LUFA_thumb.png</Icon>
+		<PreviewImage>LUFA.png</PreviewImage>
+
+		<SupportedProducts>
+			<IsolatedShell Version="6.1">AtmelStudio</IsolatedShell>
+			<IsolatedShell Version="6.2">AtmelStudio</IsolatedShell>
+		</SupportedProducts>
+
+		<SupportedFrameworkRuntimeEdition MinVersion="4.0" MaxVersion="4.5"/>
+		<Locale>1033</Locale>
+
+	    <AllUsers>false</AllUsers>
+	</Identifier>
+
+	<References/>
+
+	<Content>
+		<VsPackage>LUFA.pkgdef</VsPackage>
+	    <CustomExtension Type="MSHelp">helpcontentsetup.msha</CustomExtension>
+		<CustomExtension Type="asf-manifest">asf-manifest.xml</CustomExtension>
+	</Content>
+</Vsix>
diff --git a/tmk_core/protocol/lufa/LUFA-git/LUFA/StudioIntegration/VSIX/generate_caches.py b/tmk_core/protocol/lufa/LUFA-git/LUFA/StudioIntegration/VSIX/generate_caches.py
index c51cff400d..eb4b71efdf 100644
--- a/tmk_core/protocol/lufa/LUFA-git/LUFA/StudioIntegration/VSIX/generate_caches.py
+++ b/tmk_core/protocol/lufa/LUFA-git/LUFA/StudioIntegration/VSIX/generate_caches.py
@@ -1,38 +1,38 @@
-"""

-             LUFA Library

-     Copyright (C) Dean Camera, 2013.

-

-  dean [at] fourwalledcubicle [dot] com

-           www.lufa-lib.org

-"""

-

-import sys

-sys.path.append("ProjectGenerator")

-

-

-def show_message(message):

-    print("[Project Generator] %s" % message)

-    sys.stdout.flush()

-

-

-def main(lufa_root_path):

-    try:

-        from asf_avrstudio5_interface import PythonFacade

-    except ImportError:

-        print("Fatal Error: The ASF project generator is missing.")

-        return 1

-

-    p = PythonFacade(lufa_root_path)

-

-    show_message("Checking database sanity...")

-    p.check_extension_database_sanity(lufa_root_path)

-

-    show_message("Building cache files...")

-    p.generate_extension_cache_files(lufa_root_path)

-

-    show_message("Cache files created.")

-    return 0

-

-

-if __name__ == "__main__":

-    sys.exit(main(sys.argv[1]))

+"""
+             LUFA Library
+     Copyright (C) Dean Camera, 2013.
+
+  dean [at] fourwalledcubicle [dot] com
+           www.lufa-lib.org
+"""
+
+import sys
+sys.path.append("ProjectGenerator")
+
+
+def show_message(message):
+    print("[Project Generator] %s" % message)
+    sys.stdout.flush()
+
+
+def main(lufa_root_path):
+    try:
+        from asf_avrstudio5_interface import PythonFacade
+    except ImportError:
+        print("Fatal Error: The ASF project generator is missing.")
+        return 1
+
+    p = PythonFacade(lufa_root_path)
+
+    show_message("Checking database sanity...")
+    p.check_extension_database_sanity(lufa_root_path)
+
+    show_message("Building cache files...")
+    p.generate_extension_cache_files(lufa_root_path)
+
+    show_message("Cache files created.")
+    return 0
+
+
+if __name__ == "__main__":
+    sys.exit(main(sys.argv[1]))
diff --git a/tmk_core/protocol/lufa/LUFA-git/LUFA/StudioIntegration/lufa.xml b/tmk_core/protocol/lufa/LUFA-git/LUFA/StudioIntegration/lufa.xml
index 28afdda587..86cfc0409d 100644
--- a/tmk_core/protocol/lufa/LUFA-git/LUFA/StudioIntegration/lufa.xml
+++ b/tmk_core/protocol/lufa/LUFA-git/LUFA/StudioIntegration/lufa.xml
@@ -1,96 +1,96 @@
-<!--

-             LUFA Library

-     Copyright (C) Dean Camera, 2013.

-

-  dean [at] fourwalledcubicle [dot] com

-           www.lufa-lib.org

--->

-

-<!-- Atmel Studio framework integration file -->

-

-<lufa>

-	<extension-container>

-		<extension uuid="0e160d5c-e331-48d9-850b-e0387912171b" org="FourWalledCubicle" shortname="LUFA" version="" fullname="Lightweight USB Framework for AVRs (LUFA)">

-			<author name="Dean Camera" website="http://www.lufa-lib.org/" email="dean@fourwalledcubicle.com"/>

-			<description>Lightweight USB Framework for AVRs (LUFA), a USB software stack/framework.</description>

-			<icon-image path="LUFA/DoxygenPages/Images/LUFA_thumb.png"/>

-			<preview-image path="LUFA/DoxygenPages/Images/LUFA.png"/>

-			<license caption="LUFA License" path="LUFA/License.txt"/>

-			<release-notes caption="LUFA Information" url="http://www.lufa-lib.org"/>

-			<online-help>

-				<index-page caption="LUFA Documentation" url="http://www.lufa-lib.org/documentation/"/>

-				<module-help-page scheme="append" baseurl="http://www.lufa-lib.org/documentation/"/>

-				<module-guide-page scheme="append" baseurl="http://www.lufa-lib.org/documentation/"/>

-			</online-help>

-			<dependencies/>

-		</extension>

-	</extension-container>

-

-	<asf>

-		<device-alias-map name="lufa_avr8">

-			<device-support value="at90usb82"/>

-			<device-support value="atmega8u2"/>

-			<device-support value="at90usb162"/>

-			<device-support value="atmega16u2"/>

-			<device-support value="atmega16u4"/>

-			<device-support value="atmega32u2"/>

-			<device-support value="atmega32u4"/>

-			<device-support value="at90usb646"/>

-			<device-support value="at90usb647"/>

-			<device-support value="at90usb1286"/>

-			<device-support value="at90usb1287"/>

-		</device-alias-map>

-

-		<device-alias-map name="lufa_xmega">

-			<device-support value="atxmega16a4u"/>

-			<device-support value="atxmega32a4u"/>

-			<device-support value="atxmega64a4u"/>

-			<device-support value="atxmega128a4u"/>

-			<device-support value="atxmega64a3u"/>

-			<device-support value="atxmega128a3u"/>

-			<device-support value="atxmega192a3u"/>

-			<device-support value="atxmega256a3u"/>

-			<device-support value="atxmega256a3bu"/>

-			<device-support value="atxmega128a1u"/>

-			<device-support value="atxmega64b3"/>

-			<device-support value="atxmega128b3"/>

-			<device-support value="atxmega64b1"/>

-			<device-support value="atxmega128b1"/>

-			<device-support value="atxmega64c3"/>

-			<device-support value="atxmega128c3"/>

-			<!-- <device-support value="atxmega192c3"/> Wait for ASFP-3339 merge and release before enabling -->

-			<device-support value="atxmega256c3"/>

-			<device-support value="atxmega384c3"/>

-			<device-support value="atxmega16c4"/>

-		</device-alias-map>

-

-		<device-alias-map name="lufa_uc3">

-			<device-support value="at32uc3a364"/>

-			<device-support value="at32uc3a364s"/>

-			<device-support value="at32uc3a464"/>

-			<device-support value="at32uc3a464s"/>

-			<device-support value="at32uc3b064"/>

-			<device-support value="at32uc3b164"/>

-			<device-support value="at32uc3a0128"/>

-			<device-support value="at32uc3a1128"/>

-			<device-support value="at32uc3a3128"/>

-			<device-support value="at32uc3a3128s"/>

-			<device-support value="at32uc3a4128"/>

-			<device-support value="at32uc3a4128s"/>

-			<device-support value="at32uc3b0128"/>

-			<device-support value="at32uc3b1128"/>

-			<device-support value="at32uc3a0256"/>

-			<device-support value="at32uc3a1256"/>

-			<device-support value="at32uc3a3256"/>

-			<device-support value="at32uc3a3256s"/>

-			<device-support value="at32uc3a4256"/>

-			<device-support value="at32uc3a4256s"/>

-			<device-support value="at32uc3b0256"/>

-			<device-support value="at32uc3b1256"/>

-			<device-support value="at32uc3a0512"/>

-			<device-support value="at32uc3a1512"/>

-			<device-support value="at32uc3b0512"/>

-			<device-support value="at32uc3b1512"/>

-		</device-alias-map>

-	</asf>

-</lufa>

+<!--
+             LUFA Library
+     Copyright (C) Dean Camera, 2013.
+
+  dean [at] fourwalledcubicle [dot] com
+           www.lufa-lib.org
+-->
+
+<!-- Atmel Studio framework integration file -->
+
+<lufa>
+	<extension-container>
+		<extension uuid="0e160d5c-e331-48d9-850b-e0387912171b" org="FourWalledCubicle" shortname="LUFA" version="" fullname="Lightweight USB Framework for AVRs (LUFA)">
+			<author name="Dean Camera" website="http://www.lufa-lib.org/" email="dean@fourwalledcubicle.com"/>
+			<description>Lightweight USB Framework for AVRs (LUFA), a USB software stack/framework.</description>
+			<icon-image path="LUFA/DoxygenPages/Images/LUFA_thumb.png"/>
+			<preview-image path="LUFA/DoxygenPages/Images/LUFA.png"/>
+			<license caption="LUFA License" path="LUFA/License.txt"/>
+			<release-notes caption="LUFA Information" url="http://www.lufa-lib.org"/>
+			<online-help>
+				<index-page caption="LUFA Documentation" url="http://www.lufa-lib.org/documentation/"/>
+				<module-help-page scheme="append" baseurl="http://www.lufa-lib.org/documentation/"/>
+				<module-guide-page scheme="append" baseurl="http://www.lufa-lib.org/documentation/"/>
+			</online-help>
+			<dependencies/>
+		</extension>
+	</extension-container>
+
+	<asf>
+		<device-alias-map name="lufa_avr8">
+			<device-support value="at90usb82"/>
+			<device-support value="atmega8u2"/>
+			<device-support value="at90usb162"/>
+			<device-support value="atmega16u2"/>
+			<device-support value="atmega16u4"/>
+			<device-support value="atmega32u2"/>
+			<device-support value="atmega32u4"/>
+			<device-support value="at90usb646"/>
+			<device-support value="at90usb647"/>
+			<device-support value="at90usb1286"/>
+			<device-support value="at90usb1287"/>
+		</device-alias-map>
+
+		<device-alias-map name="lufa_xmega">
+			<device-support value="atxmega16a4u"/>
+			<device-support value="atxmega32a4u"/>
+			<device-support value="atxmega64a4u"/>
+			<device-support value="atxmega128a4u"/>
+			<device-support value="atxmega64a3u"/>
+			<device-support value="atxmega128a3u"/>
+			<device-support value="atxmega192a3u"/>
+			<device-support value="atxmega256a3u"/>
+			<device-support value="atxmega256a3bu"/>
+			<device-support value="atxmega128a1u"/>
+			<device-support value="atxmega64b3"/>
+			<device-support value="atxmega128b3"/>
+			<device-support value="atxmega64b1"/>
+			<device-support value="atxmega128b1"/>
+			<device-support value="atxmega64c3"/>
+			<device-support value="atxmega128c3"/>
+			<!-- <device-support value="atxmega192c3"/> Wait for ASFP-3339 merge and release before enabling -->
+			<device-support value="atxmega256c3"/>
+			<device-support value="atxmega384c3"/>
+			<device-support value="atxmega16c4"/>
+		</device-alias-map>
+
+		<device-alias-map name="lufa_uc3">
+			<device-support value="at32uc3a364"/>
+			<device-support value="at32uc3a364s"/>
+			<device-support value="at32uc3a464"/>
+			<device-support value="at32uc3a464s"/>
+			<device-support value="at32uc3b064"/>
+			<device-support value="at32uc3b164"/>
+			<device-support value="at32uc3a0128"/>
+			<device-support value="at32uc3a1128"/>
+			<device-support value="at32uc3a3128"/>
+			<device-support value="at32uc3a3128s"/>
+			<device-support value="at32uc3a4128"/>
+			<device-support value="at32uc3a4128s"/>
+			<device-support value="at32uc3b0128"/>
+			<device-support value="at32uc3b1128"/>
+			<device-support value="at32uc3a0256"/>
+			<device-support value="at32uc3a1256"/>
+			<device-support value="at32uc3a3256"/>
+			<device-support value="at32uc3a3256s"/>
+			<device-support value="at32uc3a4256"/>
+			<device-support value="at32uc3a4256s"/>
+			<device-support value="at32uc3b0256"/>
+			<device-support value="at32uc3b1256"/>
+			<device-support value="at32uc3a0512"/>
+			<device-support value="at32uc3a1512"/>
+			<device-support value="at32uc3b0512"/>
+			<device-support value="at32uc3b1512"/>
+		</device-alias-map>
+	</asf>
+</lufa>
diff --git a/tmk_core/protocol/lufa/LUFA-git/LUFA/StudioIntegration/lufa_common.xml b/tmk_core/protocol/lufa/LUFA-git/LUFA/StudioIntegration/lufa_common.xml
index 9e17b188be..c2ef7af4c7 100644
--- a/tmk_core/protocol/lufa/LUFA-git/LUFA/StudioIntegration/lufa_common.xml
+++ b/tmk_core/protocol/lufa/LUFA-git/LUFA/StudioIntegration/lufa_common.xml
@@ -1,34 +1,34 @@
-<!--

-             LUFA Library

-     Copyright (C) Dean Camera, 2013.

-

-  dean [at] fourwalledcubicle [dot] com

-           www.lufa-lib.org

--->

-

-<!-- Atmel Studio framework integration file -->

-

-<lufa>

-	<asf>

-		<module type="service" id="lufa.common" caption="LUFA Common Infrastructure">

-			<device-support-alias value="lufa_avr8"/>

-			<device-support-alias value="lufa_xmega"/>

-			<device-support-alias value="lufa_uc3"/>

-

-			<info type="gui-flag" value="hidden"/>

-			<build type="doxygen-entry-point" value="Group_Common"/>

-

-			<build type="include-path" value=".."/>

-			<build type="header-file" subtype="api" value="Version.h"/>

-			<build type="distribute" subtype="license" value="License.txt"/>

-

-			<build type="header-file" subtype="api" value="Common/Common.h"/>

-			<build type="header-file" value="Common/Architectures.h"/>

-			<build type="header-file" value="Common/ArchitectureSpecific.h"/>

-			<build type="header-file" value="Common/Attributes.h"/>

-			<build type="header-file" value="Common/BoardTypes.h"/>

-			<build type="header-file" value="Common/CompilerSpecific.h"/>

-			<build type="header-file" value="Common/Endianness.h"/>

-		</module>

-	</asf>

-</lufa>

+<!--
+             LUFA Library
+     Copyright (C) Dean Camera, 2013.
+
+  dean [at] fourwalledcubicle [dot] com
+           www.lufa-lib.org
+-->
+
+<!-- Atmel Studio framework integration file -->
+
+<lufa>
+	<asf>
+		<module type="service" id="lufa.common" caption="LUFA Common Infrastructure">
+			<device-support-alias value="lufa_avr8"/>
+			<device-support-alias value="lufa_xmega"/>
+			<device-support-alias value="lufa_uc3"/>
+
+			<info type="gui-flag" value="hidden"/>
+			<build type="doxygen-entry-point" value="Group_Common"/>
+
+			<build type="include-path" value=".."/>
+			<build type="header-file" subtype="api" value="Version.h"/>
+			<build type="distribute" subtype="license" value="License.txt"/>
+
+			<build type="header-file" subtype="api" value="Common/Common.h"/>
+			<build type="header-file" value="Common/Architectures.h"/>
+			<build type="header-file" value="Common/ArchitectureSpecific.h"/>
+			<build type="header-file" value="Common/Attributes.h"/>
+			<build type="header-file" value="Common/BoardTypes.h"/>
+			<build type="header-file" value="Common/CompilerSpecific.h"/>
+			<build type="header-file" value="Common/Endianness.h"/>
+		</module>
+	</asf>
+</lufa>
diff --git a/tmk_core/protocol/lufa/LUFA-git/LUFA/StudioIntegration/lufa_drivers_board.xml b/tmk_core/protocol/lufa/LUFA-git/LUFA/StudioIntegration/lufa_drivers_board.xml
index 3677d20036..e150aa6458 100644
--- a/tmk_core/protocol/lufa/LUFA-git/LUFA/StudioIntegration/lufa_drivers_board.xml
+++ b/tmk_core/protocol/lufa/LUFA-git/LUFA/StudioIntegration/lufa_drivers_board.xml
@@ -1,114 +1,114 @@
-<!--

-             LUFA Library

-     Copyright (C) Dean Camera, 2013.

-

-  dean [at] fourwalledcubicle [dot] com

-           www.lufa-lib.org

--->

-

-<!-- Atmel Studio framework integration file -->

-

-<lufa>

-	<asf>

-		<board id="lufa.boards.dummy.avr8" vendor="LUFA" caption="AVR8 Architecture">

-			<device-support value="mega"/>

-

-			<require idref="lufa.drivers.board"/>

-			<require idref="lufa.drivers.board.info"/>

-		</board>

-

-		<board id="lufa.boards.dummy.xmega" vendor="LUFA" caption="XMEGA Architecture">

-			<device-support value="xmega"/>

-

-			<require idref="lufa.drivers.board"/>

-			<require idref="lufa.drivers.board.info"/>

-		</board>

-

-		<board id="lufa.boards.dummy.uc3" vendor="LUFA" caption="UC3 Architecture">

-			<device-support value="uc3"/>

-

-			<require idref="lufa.drivers.board"/>

-			<require idref="lufa.drivers.board.info"/>

-		</board>

-

-		<module type="driver" id="lufa.drivers.board.info" caption="LUFA Board Hardware Information Driver">

-			<device-support-alias value="lufa_avr8"/>

-			<device-support-alias value="lufa_xmega"/>

-			<device-support-alias value="lufa_uc3"/>

-

-			<build type="doxygen-entry-point" value="Group_BoardInfo"/>

-

-			<require idref="lufa.common"/>

-

-			<build type="include-path" value=".."/>

-			<build type="header-file"  subtype="api" value="Drivers/Board/Board.h"/>

-		</module>

-

-		<module type="driver" id="lufa.drivers.board.leds" caption="LUFA Board LED Driver">

-			<device-support-alias value="lufa_avr8"/>

-			<device-support-alias value="lufa_xmega"/>

-			<device-support-alias value="lufa_uc3"/>

-

-			<build type="doxygen-entry-point" value="Group_LEDs"/>

-

-			<require idref="lufa.common"/>

-

-			<build type="include-path" value=".."/>

-			<build type="header-file"  subtype="api" value="Drivers/Board/LEDs.h"/>

-		</module>

-

-		<module type="driver" id="lufa.drivers.board.buttons" caption="LUFA Board Buttons Driver">

-			<device-support-alias value="lufa_avr8"/>

-			<device-support-alias value="lufa_xmega"/>

-			<device-support-alias value="lufa_uc3"/>

-

-			<build type="doxygen-entry-point" value="Group_Buttons"/>

-

-			<require idref="lufa.common"/>

-

-			<build type="include-path" value=".."/>

-			<build type="header-file"  subtype="api" value="Drivers/Board/Buttons.h"/>

-		</module>

-

-		<module type="driver" id="lufa.drivers.board.dataflash" caption="LUFA Board Dataflash Driver">

-			<device-support-alias value="lufa_avr8"/>

-			<device-support-alias value="lufa_xmega"/>

-			<device-support-alias value="lufa_uc3"/>

-

-			<build type="doxygen-entry-point" value="Group_Dataflash"/>

-

-			<require idref="lufa.common"/>

-

-			<build type="include-path" value=".."/>

-			<build type="header-file"  subtype="api" value="Drivers/Board/Dataflash.h"/>

-		</module>

-

-		<module type="driver" id="lufa.drivers.board.joystick" caption="LUFA Board Joystick Driver">

-			<device-support-alias value="lufa_avr8"/>

-			<device-support-alias value="lufa_xmega"/>

-			<device-support-alias value="lufa_uc3"/>

-

-			<build type="doxygen-entry-point" value="Group_Joystick"/>

-

-			<require idref="lufa.common"/>

-

-			<build type="include-path" value=".."/>

-			<build type="header-file"  subtype="api" value="Drivers/Board/Joystick.h"/>

-		</module>

-

-		<module type="driver" id="lufa.drivers.board.temperature" caption="LUFA Board Temperature Sensor Driver">

-			<device-support-alias value="lufa_avr8"/>

-			<device-support-alias value="lufa_xmega"/>

-			<device-support-alias value="lufa_uc3"/>

-

-			<build type="doxygen-entry-point" value="Group_Temperature"/>

-

-			<require idref="lufa.common"/>

-			<require idref="lufa.drivers.peripheral.adc"/>

-

-			<build type="c-source"     value="Drivers/Board/Temperature.c"/>

-			<build type="include-path" value=".."/>

-			<build type="header-file"  subtype="api" value="Drivers/Board/Temperature.h"/>

-		</module>

-	</asf>

-</lufa>

+<!--
+             LUFA Library
+     Copyright (C) Dean Camera, 2013.
+
+  dean [at] fourwalledcubicle [dot] com
+           www.lufa-lib.org
+-->
+
+<!-- Atmel Studio framework integration file -->
+
+<lufa>
+	<asf>
+		<board id="lufa.boards.dummy.avr8" vendor="LUFA" caption="AVR8 Architecture">
+			<device-support value="mega"/>
+
+			<require idref="lufa.drivers.board"/>
+			<require idref="lufa.drivers.board.info"/>
+		</board>
+
+		<board id="lufa.boards.dummy.xmega" vendor="LUFA" caption="XMEGA Architecture">
+			<device-support value="xmega"/>
+
+			<require idref="lufa.drivers.board"/>
+			<require idref="lufa.drivers.board.info"/>
+		</board>
+
+		<board id="lufa.boards.dummy.uc3" vendor="LUFA" caption="UC3 Architecture">
+			<device-support value="uc3"/>
+
+			<require idref="lufa.drivers.board"/>
+			<require idref="lufa.drivers.board.info"/>
+		</board>
+
+		<module type="driver" id="lufa.drivers.board.info" caption="LUFA Board Hardware Information Driver">
+			<device-support-alias value="lufa_avr8"/>
+			<device-support-alias value="lufa_xmega"/>
+			<device-support-alias value="lufa_uc3"/>
+
+			<build type="doxygen-entry-point" value="Group_BoardInfo"/>
+
+			<require idref="lufa.common"/>
+
+			<build type="include-path" value=".."/>
+			<build type="header-file"  subtype="api" value="Drivers/Board/Board.h"/>
+		</module>
+
+		<module type="driver" id="lufa.drivers.board.leds" caption="LUFA Board LED Driver">
+			<device-support-alias value="lufa_avr8"/>
+			<device-support-alias value="lufa_xmega"/>
+			<device-support-alias value="lufa_uc3"/>
+
+			<build type="doxygen-entry-point" value="Group_LEDs"/>
+
+			<require idref="lufa.common"/>
+
+			<build type="include-path" value=".."/>
+			<build type="header-file"  subtype="api" value="Drivers/Board/LEDs.h"/>
+		</module>
+
+		<module type="driver" id="lufa.drivers.board.buttons" caption="LUFA Board Buttons Driver">
+			<device-support-alias value="lufa_avr8"/>
+			<device-support-alias value="lufa_xmega"/>
+			<device-support-alias value="lufa_uc3"/>
+
+			<build type="doxygen-entry-point" value="Group_Buttons"/>
+
+			<require idref="lufa.common"/>
+
+			<build type="include-path" value=".."/>
+			<build type="header-file"  subtype="api" value="Drivers/Board/Buttons.h"/>
+		</module>
+
+		<module type="driver" id="lufa.drivers.board.dataflash" caption="LUFA Board Dataflash Driver">
+			<device-support-alias value="lufa_avr8"/>
+			<device-support-alias value="lufa_xmega"/>
+			<device-support-alias value="lufa_uc3"/>
+
+			<build type="doxygen-entry-point" value="Group_Dataflash"/>
+
+			<require idref="lufa.common"/>
+
+			<build type="include-path" value=".."/>
+			<build type="header-file"  subtype="api" value="Drivers/Board/Dataflash.h"/>
+		</module>
+
+		<module type="driver" id="lufa.drivers.board.joystick" caption="LUFA Board Joystick Driver">
+			<device-support-alias value="lufa_avr8"/>
+			<device-support-alias value="lufa_xmega"/>
+			<device-support-alias value="lufa_uc3"/>
+
+			<build type="doxygen-entry-point" value="Group_Joystick"/>
+
+			<require idref="lufa.common"/>
+
+			<build type="include-path" value=".."/>
+			<build type="header-file"  subtype="api" value="Drivers/Board/Joystick.h"/>
+		</module>
+
+		<module type="driver" id="lufa.drivers.board.temperature" caption="LUFA Board Temperature Sensor Driver">
+			<device-support-alias value="lufa_avr8"/>
+			<device-support-alias value="lufa_xmega"/>
+			<device-support-alias value="lufa_uc3"/>
+
+			<build type="doxygen-entry-point" value="Group_Temperature"/>
+
+			<require idref="lufa.common"/>
+			<require idref="lufa.drivers.peripheral.adc"/>
+
+			<build type="c-source"     value="Drivers/Board/Temperature.c"/>
+			<build type="include-path" value=".."/>
+			<build type="header-file"  subtype="api" value="Drivers/Board/Temperature.h"/>
+		</module>
+	</asf>
+</lufa>
diff --git a/tmk_core/protocol/lufa/LUFA-git/LUFA/StudioIntegration/lufa_drivers_board_names.xml b/tmk_core/protocol/lufa/LUFA-git/LUFA/StudioIntegration/lufa_drivers_board_names.xml
index 4b099920b7..ab7e03e4e9 100644
--- a/tmk_core/protocol/lufa/LUFA-git/LUFA/StudioIntegration/lufa_drivers_board_names.xml
+++ b/tmk_core/protocol/lufa/LUFA-git/LUFA/StudioIntegration/lufa_drivers_board_names.xml
@@ -1,853 +1,853 @@
-<!--

-             LUFA Library

-     Copyright (C) Dean Camera, 2013.

-

-  dean [at] fourwalledcubicle [dot] com

-           www.lufa-lib.org

--->

-

-<!-- Atmel Studio framework integration file -->

-

-<lufa>

-	<asf>

-		<select-by-config id="lufa.drivers.board" name="lufa.drivers.board.name" default="none" caption="LUFA Board Support">

-			<info type="description" value="summary">

-				Board hardware (LEDs, Buttons, etc.) drivers for the preconfigured LUFA boards. Note that only the boards

-				compatible with the currently selected device will be shown.

-

-				To disable all hardware drivers silently, use NONE. To supply customer drivers, use USER (see manual).

-			</info>

-

-			<module type="driver" id="lufa.drivers.board#none" caption="Board Support - None">

-				<device-support value="avr"/>

-				<build type="define" name="BOARD" value="BOARD_NONE"/>

-			</module>

-

-			<module type="driver" id="lufa.drivers.board#user" caption="Board Support - User Supplied">

-				<device-support value="avr"/>

-				<build type="define" name="BOARD" value="BOARD_USER"/>

-			</module>

-

-			<module type="driver" id="lufa.drivers.board#adafruit_u4" caption="Board Support - ADAFRUITU4">

-				<build type="doxygen-entry-point" value="Group_BoardInfo_ADAFRUITU4"/>

-

-				<device-support value="atmega32u4"/>

-				<build type="define" name="BOARD" value="BOARD_ADAFRUITU4"/>

-

-				<require idref="lufa.drivers.board.leds"/>

-

-				<build type="header-file" value="Drivers/Board/AVR8/ADAFRUITU4/Board.h"/>

-				<build type="header-file" value="Drivers/Board/AVR8/ADAFRUITU4/LEDs.h"/>

-			</module>

-

-			<module type="driver" id="lufa.drivers.board#atavrusbrf01" caption="Board Support - ATAVRUSBRF01">

-				<build type="doxygen-entry-point" value="Group_BoardInfo_ATAVRUSBRF01"/>

-

-				<device-support value="at90usb1287"/>

-				<build type="define" name="BOARD" value="BOARD_ATAVRUSBRF01"/>

-

-				<require idref="lufa.drivers.board.buttons"/>

-				<require idref="lufa.drivers.board.leds"/>

-

-				<build type="header-file" value="Drivers/Board/AVR8/ATAVRUSBRF01/Board.h"/>

-				<build type="header-file" value="Drivers/Board/AVR8/ATAVRUSBRF01/Buttons.h"/>

-				<build type="header-file" value="Drivers/Board/AVR8/ATAVRUSBRF01/LEDs.h"/>

-			</module>

-

-			<module type="driver" id="lufa.drivers.board#benito" caption="Board Support - BENITO">

-				<build type="doxygen-entry-point" value="Group_BoardInfo_BENITO"/>

-

-				<device-support value="at90usb162"/>

-				<build type="define" name="BOARD" value="BOARD_BENITO"/>

-

-				<require idref="lufa.drivers.board.buttons"/>

-				<require idref="lufa.drivers.board.leds"/>

-

-				<build type="header-file" value="Drivers/Board/AVR8/BENITO/Board.h"/>

-				<build type="header-file" value="Drivers/Board/AVR8/BENITO/Buttons.h"/>

-				<build type="header-file" value="Drivers/Board/AVR8/BENITO/LEDs.h"/>

-			</module>

-

-			<module type="driver" id="lufa.drivers.board#big_multio" caption="Board Support - BIGMULTIO">

-				<build type="doxygen-entry-point" value="Group_BoardInfo_BIGMULTIO"/>

-

-				<device-support value="atmega32u4"/>

-				<build type="define" name="BOARD" value="BOARD_BIGMULTIO"/>

-

-				<require idref="lufa.drivers.board.leds"/>

-

-				<build type="header-file" value="Drivers/Board/AVR8/BIGMULTIO/Board.h"/>

-				<build type="header-file" value="Drivers/Board/AVR8/BIGMULTIO/LEDs.h"/>

-			</module>

-

-			<module type="driver" id="lufa.drivers.board#blackcat" caption="Board Support - BLACKCAT">

-				<build type="doxygen-entry-point" value="Group_BoardInfo_BLACKCAT"/>

-

-				<device-support value="at90usb162"/>

-				<build type="define" name="BOARD" value="BOARD_BLACKCAT"/>

-

-				<require idref="lufa.drivers.board.leds"/>

-

-				<build type="header-file" value="Drivers/Board/AVR8/BLACKCAT/Board.h"/>

-				<build type="header-file" value="Drivers/Board/AVR8/BLACKCAT/LEDs.h"/>

-			</module>

-

-			<module type="driver" id="lufa.drivers.board#bui" caption="Board Support - BUI">

-				<build type="doxygen-entry-point" value="Group_BoardInfo_BUI"/>

-

-				<device-support value="at90usb646"/>

-				<build type="define" name="BOARD" value="BOARD_BUI"/>

-

-				<require idref="lufa.drivers.board.leds"/>

-

-				<build type="header-file" value="Drivers/Board/AVR8/BUI/Board.h"/>

-				<build type="header-file" value="Drivers/Board/AVR8/BUI/LEDs.h"/>

-			</module>

-

-			<module type="driver" id="lufa.drivers.board#bumbleb" caption="Board Support - BUMBLEB">

-				<build type="doxygen-entry-point" value="Group_BoardInfo_BUMBLEB"/>

-

-				<device-support value="at90usb162"/>

-				<build type="define" name="BOARD" value="BOARD_BUMBLEB"/>

-

-				<require idref="lufa.drivers.board.buttons"/>

-				<require idref="lufa.drivers.board.leds"/>

-				<require idref="lufa.drivers.board.joystick"/>

-

-				<build type="header-file" value="Drivers/Board/AVR8/BUMBLEB/Board.h"/>

-				<build type="header-file" value="Drivers/Board/AVR8/BUMBLEB/Buttons.h"/>

-				<build type="header-file" value="Drivers/Board/AVR8/BUMBLEB/Joystick.h"/>

-				<build type="header-file" value="Drivers/Board/AVR8/BUMBLEB/LEDs.h"/>

-			</module>

-

-			<module type="driver" id="lufa.drivers.board#culv3" caption="Board Support - CULV3">

-				<build type="doxygen-entry-point" value="Group_BoardInfo_CULV3"/>

-

-				<device-support value="atmega32u4"/>

-				<build type="define" name="BOARD" value="BOARD_CULV3"/>

-

-				<require idref="lufa.drivers.board.buttons"/>

-				<require idref="lufa.drivers.board.leds"/>

-

-				<build type="header-file" value="Drivers/Board/AVR8/CULV3/Board.h"/>

-				<build type="header-file" value="Drivers/Board/AVR8/CULV3/Buttons.h"/>

-				<build type="header-file" value="Drivers/Board/AVR8/CULV3/LEDs.h"/>

-			</module>

-

-			<module type="driver" id="lufa.drivers.board#duce" caption="Board Support - DUCE">

-				<build type="doxygen-entry-point" value="Group_BoardInfo_DUCE"/>

-

-				<device-support value="atmega32u2"/>

-				<build type="define" name="BOARD" value="BOARD_DUCE"/>

-

-				<require idref="lufa.drivers.board.leds"/>

-

-				<build type="header-file" value="Drivers/Board/AVR8/DUCE/Board.h"/>

-				<build type="header-file" value="Drivers/Board/AVR8/DUCE/LEDs.h"/>

-			</module>

-

-			<module type="driver" id="lufa.drivers.board#evk527" caption="Board Support - EVK527">

-				<build type="doxygen-entry-point" value="Group_BoardInfo_EVK527"/>

-

-				<device-support value="atmega32u4"/>

-				<build type="define" name="BOARD" value="BOARD_EVK527"/>

-

-				<require idref="lufa.drivers.misc.at45db321c"/>

-				<require idref="lufa.drivers.peripheral.spi"/>

-				<require idref="lufa.drivers.board.buttons"/>

-				<require idref="lufa.drivers.board.dataflash"/>

-				<require idref="lufa.drivers.board.joystick"/>

-				<require idref="lufa.drivers.board.leds"/>

-

-				<build type="header-file" value="Drivers/Board/AVR8/EVK527/Board.h"/>

-				<build type="header-file" value="Drivers/Board/AVR8/EVK527/Buttons.h"/>

-				<build type="header-file" value="Drivers/Board/AVR8/EVK527/Dataflash.h"/>

-				<build type="header-file" value="Drivers/Board/AVR8/EVK527/Joystick.h"/>

-				<build type="header-file" value="Drivers/Board/AVR8/EVK527/LEDs.h"/>

-			</module>

-

-			<module type="driver" id="lufa.drivers.board#jm_db_u2" caption="Board Support - JMDBU2">

-				<build type="doxygen-entry-point" value="Group_BoardInfo_JMDBU2"/>

-

-				<device-support value="atmega32u2"/>

-				<build type="define" name="BOARD" value="BOARD_JMDBU2"/>

-

-				<require idref="lufa.drivers.board.buttons"/>

-				<require idref="lufa.drivers.board.leds"/>

-

-				<build type="header-file" value="Drivers/Board/AVR8/JMDBU2/Board.h"/>

-				<build type="header-file" value="Drivers/Board/AVR8/JMDBU2/Buttons.h"/>

-				<build type="header-file" value="Drivers/Board/AVR8/JMDBU2/LEDs.h"/>

-			</module>

-

-			<module type="driver" id="lufa.drivers.board#leonardo" caption="Board Support - LEONARDO">

-				<build type="doxygen-entry-point" value="Group_BoardInfo_LEONARDO"/>

-

-				<device-support value="atmega32u4"/>

-				<build type="define" name="BOARD" value="BOARD_LEONARDO"/>

-

-				<require idref="lufa.drivers.board.leds"/>

-

-				<build type="header-file" value="Drivers/Board/AVR8/LEONARDO/Board.h"/>

-				<build type="header-file" value="Drivers/Board/AVR8/LEONARDO/LEDs.h"/>

-			</module>

-

-			<module type="driver" id="lufa.drivers.board#maximus" caption="Board Support - MAXIMUS">

-				<build type="doxygen-entry-point" value="Group_BoardInfo_MAXIMUS"/>

-

-				<device-support value="at90usb162"/>

-				<build type="define" name="BOARD" value="BOARD_MAXIMUS"/>

-

-				<require idref="lufa.drivers.board.leds"/>

-

-				<build type="header-file" value="Drivers/Board/AVR8/MAXIMUS/Board.h"/>

-				<build type="header-file" value="Drivers/Board/AVR8/MAXIMUS/LEDs.h"/>

-			</module>

-

-			<module type="driver" id="lufa.drivers.board#micropendous_32u2" caption="Board Support - MICROPENDOUS_32U2">

-				<build type="doxygen-entry-point" value="Group_BoardInfo_MICROPENDOUS_32U2"/>

-

-				<device-support value="atmega32u2"/>

-				<build type="define" name="BOARD" value="BOARD_MICROPENDOUS_32U2"/>

-

-				<require idref="lufa.drivers.board.leds"/>

-				<require idref="lufa.drivers.board.buttons"/>

-

-				<build type="header-file" value="Drivers/Board/AVR8/MICROPENDOUS/Board.h"/>

-				<build type="header-file" value="Drivers/Board/AVR8/MICROPENDOUS/LEDs.h"/>

-				<build type="header-file" value="Drivers/Board/AVR8/MICROPENDOUS/Buttons.h"/>

-			</module>

-

-			<module type="driver" id="lufa.drivers.board#micropendous_a" caption="Board Support - MICROPENDOUS_A">

-				<build type="doxygen-entry-point" value="Group_BoardInfo_MICROPENDOUS_A"/>

-

-				<device-support value="at90usb1287"/>

-				<build type="define" name="BOARD" value="BOARD_MICROPENDOUS_A"/>

-

-				<require idref="lufa.drivers.board.buttons"/>

-

-				<build type="header-file" value="Drivers/Board/AVR8/MICROPENDOUS/Board.h"/>

-				<build type="header-file" value="Drivers/Board/AVR8/MICROPENDOUS/Buttons.h"/>

-			</module>

-

-			<module type="driver" id="lufa.drivers.board#micropendous_1" caption="Board Support - MICROPENDOUS_1">

-				<build type="doxygen-entry-point" value="Group_BoardInfo_MICROPENDOUS_1"/>

-

-				<device-support value="at90usb162"/>

-				<build type="define" name="BOARD" value="BOARD_MICROPENDOUS_1"/>

-

-				<require idref="lufa.drivers.board.buttons"/>

-

-				<build type="header-file" value="Drivers/Board/AVR8/MICROPENDOUS/Board.h"/>

-				<build type="header-file" value="Drivers/Board/AVR8/MICROPENDOUS/Buttons.h"/>

-			</module>

-

-			<module type="driver" id="lufa.drivers.board#micropendous_2" caption="Board Support - MICROPENDOUS_2">

-				<build type="doxygen-entry-point" value="Group_BoardInfo_MICROPENDOUS_2"/>

-

-				<device-support value="atmega32u4"/>

-				<build type="define" name="BOARD" value="BOARD_MICROPENDOUS_2"/>

-

-				<require idref="lufa.drivers.board.buttons"/>

-

-				<build type="header-file" value="Drivers/Board/AVR8/MICROPENDOUS/Board.h"/>

-				<build type="header-file" value="Drivers/Board/AVR8/MICROPENDOUS/Buttons.h"/>

-			</module>

-

-			<module type="driver" id="lufa.drivers.board#micropendous_3" caption="Board Support - MICROPENDOUS_3">

-				<build type="doxygen-entry-point" value="Group_BoardInfo_MICROPENDOUS_3"/>

-

-				<device-support value="at90usb1287"/>

-				<build type="define" name="BOARD" value="BOARD_MICROPENDOUS_3"/>

-

-				<require idref="lufa.drivers.board.buttons"/>

-

-				<build type="header-file" value="Drivers/Board/AVR8/MICROPENDOUS/Board.h"/>

-				<build type="header-file" value="Drivers/Board/AVR8/MICROPENDOUS/Buttons.h"/>

-			</module>

-

-			<module type="driver" id="lufa.drivers.board#micropendous_4" caption="Board Support - MICROPENDOUS_4">

-				<build type="doxygen-entry-point" value="Group_BoardInfo_MICROPENDOUS_4"/>

-

-				<device-support value="at90usb1287"/>

-				<build type="define" name="BOARD" value="BOARD_MICROPENDOUS_4"/>

-

-				<require idref="lufa.drivers.board.buttons"/>

-

-				<build type="header-file" value="Drivers/Board/AVR8/MICROPENDOUS/Board.h"/>

-				<build type="header-file" value="Drivers/Board/AVR8/MICROPENDOUS/Buttons.h"/>

-			</module>

-

-			<module type="driver" id="lufa.drivers.board#micropendous_dip" caption="Board Support - MICROPENDOUS_DIP">

-				<build type="doxygen-entry-point" value="Group_BoardInfo_MICROPENDOUS_DIP"/>

-

-				<device-support value="at90usb1287"/>

-				<build type="define" name="BOARD" value="BOARD_MICROPENDOUS_DIP"/>

-

-				<require idref="lufa.drivers.board.buttons"/>

-

-				<build type="header-file" value="Drivers/Board/AVR8/MICROPENDOUS/Board.h"/>

-				<build type="header-file" value="Drivers/Board/AVR8/MICROPENDOUS/Buttons.h"/>

-			</module>

-

-			<module type="driver" id="lufa.drivers.board#micropendous_rev1" caption="Board Support - MICROPENDOUS_REV1">

-				<build type="doxygen-entry-point" value="Group_BoardInfo_MICROPENDOUS_REV1"/>

-

-				<device-support value="at90usb1287"/>

-				<build type="define" name="BOARD" value="BOARD_MICROPENDOUS_REV1"/>

-

-				<require idref="lufa.drivers.board.leds"/>

-				<require idref="lufa.drivers.board.buttons"/>

-

-				<build type="header-file" value="Drivers/Board/AVR8/MICROPENDOUS/Board.h"/>

-				<build type="header-file" value="Drivers/Board/AVR8/MICROPENDOUS/LEDs.h"/>

-				<build type="header-file" value="Drivers/Board/AVR8/MICROPENDOUS/Buttons.h"/>

-			</module>

-

-			<module type="driver" id="lufa.drivers.board#micropendous_rev2" caption="Board Support - MICROPENDOUS_REV2">

-				<build type="doxygen-entry-point" value="Group_BoardInfo_MICROPENDOUS_REV2"/>

-

-				<device-support value="at90usb1287"/>

-				<build type="define" name="BOARD" value="BOARD_MICROPENDOUS_REV2"/>

-

-				<require idref="lufa.drivers.board.leds"/>

-				<require idref="lufa.drivers.board.buttons"/>

-

-				<build type="header-file" value="Drivers/Board/AVR8/MICROPENDOUS/Board.h"/>

-				<build type="header-file" value="Drivers/Board/AVR8/MICROPENDOUS/LEDs.h"/>

-				<build type="header-file" value="Drivers/Board/AVR8/MICROPENDOUS/Buttons.h"/>

-			</module>

-

-			<module type="driver" id="lufa.drivers.board#microsin_162" caption="Board Support - MICROSIN162">

-				<build type="doxygen-entry-point" value="Group_BoardInfo_MICROSIN162"/>

-

-				<device-support value="atmega162"/>

-				<build type="define" name="BOARD" value="BOARD_MICROSIN162"/>

-

-				<require idref="lufa.drivers.board.leds"/>

-				<require idref="lufa.drivers.board.buttons"/>

-

-				<build type="header-file" value="Drivers/Board/AVR8/MICROSIN162/Board.h"/>

-				<build type="header-file" value="Drivers/Board/AVR8/MICROSIN162/LEDs.h"/>

-				<build type="header-file" value="Drivers/Board/AVR8/MICROSIN162/Buttons.h"/>

-			</module>

-

-			<module type="driver" id="lufa.drivers.board#minimus" caption="Board Support - MINIMUS">

-				<build type="doxygen-entry-point" value="Group_BoardInfo_MINIMUS"/>

-

-				<device-support value="atmega32u2"/>

-				<build type="define" name="BOARD" value="BOARD_MINIMUS"/>

-

-				<require idref="lufa.drivers.board.leds"/>

-				<require idref="lufa.drivers.board.buttons"/>

-

-				<build type="header-file" value="Drivers/Board/AVR8/MINIMUS/Board.h"/>

-				<build type="header-file" value="Drivers/Board/AVR8/MINIMUS/LEDs.h"/>

-				<build type="header-file" value="Drivers/Board/AVR8/MINIMUS/Buttons.h"/>

-			</module>

-

-			<module type="driver" id="lufa.drivers.board#multio" caption="Board Support - MULTIO">

-				<build type="doxygen-entry-point" value="Group_BoardInfo_MULTIO"/>

-

-				<device-support value="at90usb162"/>

-				<build type="define" name="BOARD" value="BOARD_MULTIO"/>

-

-				<require idref="lufa.drivers.board.leds"/>

-

-				<build type="header-file" value="Drivers/Board/AVR8/MULTIO/Board.h"/>

-				<build type="header-file" value="Drivers/Board/AVR8/MULTIO/LEDs.h"/>

-			</module>

-

-			<module type="driver" id="lufa.drivers.board#olimex_162" caption="Board Support - OLIMEX162">

-				<build type="doxygen-entry-point" value="Group_BoardInfo_OLIMEX162"/>

-

-				<device-support value="at90usb162"/>

-				<build type="define" name="BOARD" value="BOARD_OLIMEX162"/>

-

-				<require idref="lufa.drivers.board.leds"/>

-				<require idref="lufa.drivers.board.buttons"/>

-

-				<build type="header-file" value="Drivers/Board/AVR8/OLIMEX162/Board.h"/>

-				<build type="header-file" value="Drivers/Board/AVR8/OLIMEX162/LEDs.h"/>

-				<build type="header-file" value="Drivers/Board/AVR8/OLIMEX162/Buttons.h"/>

-			</module>

-

-			<module type="driver" id="lufa.drivers.board#olimex_32u4" caption="Board Support - OLIMEX32U4">

-				<build type="doxygen-entry-point" value="Group_BoardInfo_OLIMEX32U4"/>

-

-				<device-support value="atmega32u4"/>

-				<build type="define" name="BOARD" value="BOARD_OLIMEX32U4"/>

-

-				<require idref="lufa.drivers.board.leds"/>

-				<require idref="lufa.drivers.board.buttons"/>

-

-				<build type="header-file" value="Drivers/Board/AVR8/OLIMEX32U4/Board.h"/>

-				<build type="header-file" value="Drivers/Board/AVR8/OLIMEX32U4/LEDs.h"/>

-				<build type="header-file" value="Drivers/Board/AVR8/OLIMEX32U4/Buttons.h"/>

-			</module>

-

-			<module type="driver" id="lufa.drivers.board#olimex_isp_mkii" caption="Board Support - OLIMEXISPMK2">

-				<build type="doxygen-entry-point" value="Group_BoardInfo_OLIMEXISPMK2"/>

-

-				<device-support value="at90usb162"/>

-				<build type="define" name="BOARD" value="BOARD_OLIMEXISPMK2"/>

-

-				<require idref="lufa.drivers.board.leds"/>

-				<require idref="lufa.drivers.board.buttons"/>

-

-				<build type="header-file" value="Drivers/Board/AVR8/OLIMEXISPMK2/Board.h"/>

-				<build type="header-file" value="Drivers/Board/AVR8/OLIMEXISPMK2/LEDs.h"/>

-				<build type="header-file" value="Drivers/Board/AVR8/OLIMEXISPMK2/Buttons.h"/>

-			</module>

-

-			<module type="driver" id="lufa.drivers.board#olimex_t32u4" caption="Board Support - OLIMEX_T32U4">

-				<build type="doxygen-entry-point" value="Group_BoardInfo_OLIMEXT32U4"/>

-

-				<device-support value="atmega32u4"/>

-				<build type="define" name="BOARD" value="BOARD_OLIMEXT32U4"/>

-

-				<require idref="lufa.drivers.board.leds"/>

-				<require idref="lufa.drivers.board.buttons"/>

-

-				<build type="header-file" value="Drivers/Board/AVR8/OLIMEXT32U4/Board.h"/>

-				<build type="header-file" value="Drivers/Board/AVR8/OLIMEXT32U4/LEDs.h"/>

-				<build type="header-file" value="Drivers/Board/AVR8/OLIMEXT32U4/Buttons.h"/>

-			</module>

-

-			<module type="driver" id="lufa.drivers.board#rzusbstick" caption="Board Support - RZUSBSTICK">

-				<build type="doxygen-entry-point" value="Group_BoardInfo_RZUSBSTICK"/>

-

-				<device-support value="at90usb1287"/>

-				<build type="define" name="BOARD" value="BOARD_RZUSBSTICK"/>

-

-				<require idref="lufa.drivers.board.leds"/>

-

-				<build type="header-file" value="Drivers/Board/AVR8/RZUSBSTICK/Board.h"/>

-				<build type="header-file" value="Drivers/Board/AVR8/RZUSBSTICK/LEDs.h"/>

-			</module>

-

-			<module type="driver" id="lufa.drivers.board#sparkfun_8u2" caption="Board Support - SPARKFUN8U2">

-				<build type="doxygen-entry-point" value="Group_BoardInfo_SPARKFUN8U2"/>

-

-				<device-support value="atmega8u2"/>

-				<build type="define" name="BOARD" value="BOARD_SPARKFUN8U2"/>

-

-				<require idref="lufa.drivers.board.leds"/>

-

-				<build type="header-file" value="Drivers/Board/AVR8/SPARKFUN8U2/Board.h"/>

-				<build type="header-file" value="Drivers/Board/AVR8/SPARKFUN8U2/LEDs.h"/>

-			</module>

-

-			<module type="driver" id="lufa.drivers.board#stk525" caption="Board Support - STK525">

-				<build type="doxygen-entry-point" value="Group_BoardInfo_STK525"/>

-

-				<device-support value="at90usb1287"/>

-				<device-support value="at90usb1286"/>

-				<device-support value="at90usb647"/>

-				<device-support value="at90usb646"/>

-				<build type="define" name="BOARD" value="BOARD_STK525"/>

-

-				<require idref="lufa.drivers.misc.at45db321c"/>

-				<require idref="lufa.drivers.peripheral.spi"/>

-				<require idref="lufa.drivers.board.buttons"/>

-				<require idref="lufa.drivers.board.dataflash"/>

-				<require idref="lufa.drivers.board.joystick"/>

-				<require idref="lufa.drivers.board.leds"/>

-

-				<build type="header-file" value="Drivers/Board/AVR8/STK525/Board.h"/>

-				<build type="header-file" value="Drivers/Board/AVR8/STK525/Buttons.h"/>

-				<build type="header-file" value="Drivers/Board/AVR8/STK525/Dataflash.h"/>

-				<build type="header-file" value="Drivers/Board/AVR8/STK525/Joystick.h"/>

-				<build type="header-file" value="Drivers/Board/AVR8/STK525/LEDs.h"/>

-			</module>

-

-			<module type="driver" id="lufa.drivers.board#stk526" caption="Board Support - STK526">

-				<build type="doxygen-entry-point" value="Group_BoardInfo_STK526"/>

-

-				<device-support value="at90usb162"/>

-				<device-support value="at90usb82"/>

-				<device-support value="atmega32u2"/>

-				<device-support value="atmega16u2"/>

-				<device-support value="atmega8u2"/>

-				<build type="define" name="BOARD" value="BOARD_STK526"/>

-

-				<require idref="lufa.drivers.misc.at45db642d"/>

-				<require idref="lufa.drivers.peripheral.spi"/>

-				<require idref="lufa.drivers.board.buttons"/>

-				<require idref="lufa.drivers.board.dataflash"/>

-				<require idref="lufa.drivers.board.joystick"/>

-				<require idref="lufa.drivers.board.leds"/>

-

-				<build type="header-file" value="Drivers/Board/AVR8/STK526/Board.h"/>

-				<build type="header-file" value="Drivers/Board/AVR8/STK526/Buttons.h"/>

-				<build type="header-file" value="Drivers/Board/AVR8/STK526/Dataflash.h"/>

-				<build type="header-file" value="Drivers/Board/AVR8/STK526/Joystick.h"/>

-				<build type="header-file" value="Drivers/Board/AVR8/STK526/LEDs.h"/>

-			</module>

-

-			<module type="driver" id="lufa.drivers.board#teensy" caption="Board Support - TEENSY">

-				<build type="doxygen-entry-point" value="Group_BoardInfo_TEENSY"/>

-

-				<device-support value="at90usb162"/>

-				<build type="define" name="BOARD" value="BOARD_TEENSY"/>

-

-				<require idref="lufa.drivers.board.leds"/>

-

-				<build type="header-file" value="Drivers/Board/AVR8/TEENSY/Board.h"/>

-				<build type="header-file" value="Drivers/Board/AVR8/TEENSY/LEDs.h"/>

-			</module>

-

-			<module type="driver" id="lufa.drivers.board#teensy2" caption="Board Support - TEENSY2">

-				<build type="doxygen-entry-point" value="Group_BoardInfo_TEENSY2"/>

-

-				<device-support value="at90usb646"/>

-				<build type="define" name="BOARD" value="BOARD_TEENSY2"/>

-

-				<require idref="lufa.drivers.board.leds"/>

-

-				<build type="header-file" value="Drivers/Board/AVR8/TEENSY/Board.h"/>

-				<build type="header-file" value="Drivers/Board/AVR8/TEENSY/LEDs.h"/>

-			</module>

-

-			<module type="driver" id="lufa.drivers.board#tul" caption="Board Support - TUL">

-				<build type="doxygen-entry-point" value="Group_BoardInfo_TUL"/>

-

-				<device-support value="atmega32u4"/>

-				<build type="define" name="BOARD" value="BOARD_TUL"/>

-

-				<require idref="lufa.drivers.board.buttons"/>

-				<require idref="lufa.drivers.board.leds"/>

-

-				<build type="header-file" value="Drivers/Board/AVR8/TUL/Board.h"/>

-				<build type="header-file" value="Drivers/Board/AVR8/TUL/Buttons.h"/>

-				<build type="header-file" value="Drivers/Board/AVR8/TUL/LEDs.h"/>

-			</module>

-

-			<module type="driver" id="lufa.drivers.board#udip" caption="Board Support - UDIP">

-				<build type="doxygen-entry-point" value="Group_BoardInfo_UDIP"/>

-

-				<device-support value="atmega32u2"/>

-				<build type="define" name="BOARD" value="BOARD_UDIP"/>

-

-				<require idref="lufa.drivers.board.buttons"/>

-				<require idref="lufa.drivers.board.leds"/>

-

-				<build type="header-file" value="Drivers/Board/AVR8/UDIP/Board.h"/>

-				<build type="header-file" value="Drivers/Board/AVR8/UDIP/Buttons.h"/>

-				<build type="header-file" value="Drivers/Board/AVR8/UDIP/LEDs.h"/>

-			</module>

-

-			<module type="driver" id="lufa.drivers.board#uno" caption="Board Support - UNO">

-				<build type="doxygen-entry-point" value="Group_BoardInfo_UNO"/>

-

-				<device-support value="atmega8u2"/>

-				<device-support value="atmega16u2"/>

-				<build type="define" name="BOARD" value="BOARD_UNO"/>

-

-				<require idref="lufa.drivers.board.leds"/>

-

-				<build type="header-file" value="Drivers/Board/AVR8/UNO/Board.h"/>

-				<build type="header-file" value="Drivers/Board/AVR8/UNO/LEDs.h"/>

-			</module>

-

-			<module type="driver" id="lufa.drivers.board#usb2ax" caption="Board Support - USB2AX">

-				<build type="doxygen-entry-point" value="Group_BoardInfo_USB2AX"/>

-

-				<device-support value="atmega32u2"/>

-				<build type="define" name="BOARD" value="BOARD_USB2AX"/>

-

-				<require idref="lufa.drivers.board.buttons"/>

-				<require idref="lufa.drivers.board.leds"/>

-

-				<build type="header-file" value="Drivers/Board/AVR8/USB2AX/Board.h"/>

-				<build type="header-file" value="Drivers/Board/AVR8/USB2AX/Buttons.h"/>

-				<build type="header-file" value="Drivers/Board/AVR8/USB2AX/LEDs.h"/>

-			</module>

-

-			<module type="driver" id="lufa.drivers.board#usb2ax_v3" caption="Board Support - USB2AX_V3">

-				<build type="doxygen-entry-point" value="Group_BoardInfo_USB2AX_V3"/>

-

-				<device-support value="atmega32u2"/>

-				<build type="define" name="BOARD" value="BOARD_USB2AX_V3"/>

-

-				<require idref="lufa.drivers.board.buttons"/>

-				<require idref="lufa.drivers.board.leds"/>

-

-				<build type="header-file" value="Drivers/Board/AVR8/USB2AX/Board.h"/>

-				<build type="header-file" value="Drivers/Board/AVR8/USB2AX/Buttons.h"/>

-				<build type="header-file" value="Drivers/Board/AVR8/USB2AX/LEDs.h"/>

-			</module>

-

-			<module type="driver" id="lufa.drivers.board#usb2ax_v3_1" caption="Board Support - USB2AX_V31">

-				<build type="doxygen-entry-point" value="Group_BoardInfo_USB2AX_V31"/>

-

-				<device-support value="atmega32u2"/>

-				<build type="define" name="BOARD" value="BOARD_USB2AX_V31"/>

-

-				<require idref="lufa.drivers.board.buttons"/>

-				<require idref="lufa.drivers.board.leds"/>

-

-				<build type="header-file" value="Drivers/Board/AVR8/USB2AX/Board.h"/>

-				<build type="header-file" value="Drivers/Board/AVR8/USB2AX/Buttons.h"/>

-				<build type="header-file" value="Drivers/Board/AVR8/USB2AX/LEDs.h"/>

-			</module>

-

-			<module type="driver" id="lufa.drivers.board#usbfoo" caption="Board Support - USBFOO">

-				<build type="doxygen-entry-point" value="Group_BoardInfo_USBFOO"/>

-

-				<device-support value="atmega162"/>

-				<build type="define" name="BOARD" value="BOARD_USBFOO"/>

-

-				<require idref="lufa.drivers.board.buttons"/>

-				<require idref="lufa.drivers.board.leds"/>

-

-				<build type="header-file" value="Drivers/Board/AVR8/USBFOO/Board.h"/>

-				<build type="header-file" value="Drivers/Board/AVR8/USBFOO/Buttons.h"/>

-				<build type="header-file" value="Drivers/Board/AVR8/USBFOO/LEDs.h"/>

-			</module>

-

-			<module type="driver" id="lufa.drivers.board#usbkey" caption="Board Support - USBKEY">

-				<build type="doxygen-entry-point" value="Group_BoardInfo_USBKEY"/>

-

-				<device-support value="at90usb1287"/>

-				<build type="define" name="BOARD" value="BOARD_USBKEY"/>

-

-				<require idref="lufa.drivers.misc.at45db642d"/>

-				<require idref="lufa.drivers.peripheral.spi"/>

-

-				<require idref="lufa.drivers.board.buttons"/>

-				<require idref="lufa.drivers.board.dataflash"/>

-				<require idref="lufa.drivers.board.joystick"/>

-				<require idref="lufa.drivers.board.leds"/>

-

-				<build type="header-file" value="Drivers/Board/AVR8/USBKEY/Board.h"/>

-				<build type="header-file" value="Drivers/Board/AVR8/USBKEY/Buttons.h"/>

-				<build type="header-file" value="Drivers/Board/AVR8/USBKEY/Dataflash.h"/>

-				<build type="header-file" value="Drivers/Board/AVR8/USBKEY/Joystick.h"/>

-				<build type="header-file" value="Drivers/Board/AVR8/USBKEY/LEDs.h"/>

-			</module>

-

-			<module type="driver" id="lufa.drivers.board#usbtiny_mkii" caption="Board Support - USBTINYMKII">

-				<build type="doxygen-entry-point" value="Group_BoardInfo_USBTINYMKII"/>

-

-				<device-support value="at90usb162"/>

-				<build type="define" name="BOARD" value="BOARD_USBTINYMKII"/>

-

-				<require idref="lufa.drivers.board.buttons"/>

-				<require idref="lufa.drivers.board.leds"/>

-

-				<build type="header-file" value="Drivers/Board/AVR8/USBTINYMKII/Board.h"/>

-				<build type="header-file" value="Drivers/Board/AVR8/USBTINYMKII/Buttons.h"/>

-				<build type="header-file" value="Drivers/Board/AVR8/USBTINYMKII/LEDs.h"/>

-			</module>

-

-			<module type="driver" id="lufa.drivers.board#xplain_rev1" caption="Board Support - XPLAIN (HW Rev 1)">

-				<build type="doxygen-entry-point" value="Group_BoardInfo_XPLAIN_REV1"/>

-

-				<device-support value="at90usb1287"/>

-

-				<require idref="lufa.drivers.misc.at45db642d"/>

-				<require idref="lufa.drivers.peripheral.spi"/>

-				<require idref="lufa.drivers.board.dataflash"/>

-				<require idref="lufa.drivers.board.leds"/>

-

-				<build type="header-file" value="Drivers/Board/AVR8/XPLAIN/Board.h"/>

-				<build type="header-file" value="Drivers/Board/AVR8/XPLAIN/Dataflash.h"/>

-				<build type="header-file" value="Drivers/Board/AVR8/XPLAIN/LEDs.h"/>

-

-				<build type="define" name="BOARD" value="BOARD_XPLAIN_REV1"/>

-			</module>

-

-			<module type="driver" id="lufa.drivers.board#xplain" caption="Board Support - XPLAIN (HW Rev 2+)">

-				<build type="doxygen-entry-point" value="Group_BoardInfo_XPLAIN"/>

-

-				<device-support value="at90usb1287"/>

-

-				<require idref="lufa.drivers.misc.at45db642d"/>

-				<require idref="lufa.drivers.peripheral.spi"/>

-				<require idref="lufa.drivers.board.dataflash"/>

-				<require idref="lufa.drivers.board.leds"/>

-

-				<build type="header-file" value="Drivers/Board/AVR8/XPLAIN/Board.h"/>

-				<build type="header-file" value="Drivers/Board/AVR8/XPLAIN/Dataflash.h"/>

-				<build type="header-file" value="Drivers/Board/AVR8/XPLAIN/LEDs.h"/>

-

-				<build type="define" name="BOARD" value="BOARD_XPLAIN"/>

-			</module>

-

-			<module type="driver" id="lufa.drivers.board#a3bu_xplained" caption="Board Support - A3BU_XPLAINED">

-				<build type="doxygen-entry-point" value="Group_BoardInfo_A3BU_XPLAINED"/>

-

-				<device-support value="atxmega256a3bu"/>

-

-				<require idref="lufa.drivers.misc.at45db642d"/>

-				<require idref="lufa.drivers.peripheral.usart_spi"/>

-

-				<require idref="lufa.drivers.board.buttons"/>

-				<require idref="lufa.drivers.board.dataflash"/>

-				<require idref="lufa.drivers.board.leds"/>

-

-				<build type="header-file" value="Drivers/Board/XMEGA/A3BU_XPLAINED/Board.h"/>

-				<build type="header-file" value="Drivers/Board/XMEGA/A3BU_XPLAINED/Buttons.h"/>

-				<build type="header-file" value="Drivers/Board/XMEGA/A3BU_XPLAINED/Dataflash.h"/>

-				<build type="header-file" value="Drivers/Board/XMEGA/A3BU_XPLAINED/LEDs.h"/>

-

-				<build type="define" name="BOARD" value="BOARD_A3BU_XPLAINED"/>

-			</module>

-

-			<module type="driver" id="lufa.drivers.board#b1_xplained" caption="Board Support - B1_XPLAINED">

-				<build type="doxygen-entry-point" value="Group_BoardInfo_B1_XPLAINED"/>

-

-				<device-support value="atxmega128b1"/>

-

-				<require idref="lufa.drivers.misc.at45db642d"/>

-				<require idref="lufa.drivers.peripheral.usart_spi"/>

-				<require idref="lufa.drivers.board.buttons"/>

-				<require idref="lufa.drivers.board.dataflash"/>

-				<require idref="lufa.drivers.board.leds"/>

-

-				<build type="header-file" value="Drivers/Board/XMEGA/B1_XPLAINED/Board.h"/>

-				<build type="header-file" value="Drivers/Board/XMEGA/B1_XPLAINED/Buttons.h"/>

-				<build type="header-file" value="Drivers/Board/XMEGA/B1_XPLAINED/Dataflash.h"/>

-				<build type="header-file" value="Drivers/Board/XMEGA/B1_XPLAINED/LEDs.h"/>

-

-				<build type="define" name="BOARD" value="BOARD_B1_XPLAINED"/>

-			</module>

-

-			<module type="driver" id="lufa.drivers.board#evk1100" caption="Board Support - EVK1100">

-				<build type="doxygen-entry-point" value="Group_BoardInfo_EVK1100"/>

-

-				<device-support value="at32uc3a0512"/>

-

-				<require idref="lufa.drivers.board.buttons"/>

-				<require idref="lufa.drivers.board.joystick"/>

-				<require idref="lufa.drivers.board.leds"/>

-

-				<build type="header-file" value="Drivers/Board/UC3/EVK1100/Board.h"/>

-				<build type="header-file" value="Drivers/Board/UC3/EVK1100/Buttons.h"/>

-				<build type="header-file" value="Drivers/Board/UC3/EVK1100/Joystick.h"/>

-				<build type="header-file" value="Drivers/Board/UC3/EVK1100/LEDs.h"/>

-

-				<build type="define" name="BOARD" value="BOARD_EVK1100"/>

-			</module>

-

-			<module type="driver" id="lufa.drivers.board#evk1101" caption="Board Support - EVK1101">

-				<build type="doxygen-entry-point" value="Group_BoardInfo_EVK1101"/>

-

-				<device-support value="at32uc3b0256"/>

-

-				<require idref="lufa.drivers.board.buttons"/>

-				<require idref="lufa.drivers.board.joystick"/>

-				<require idref="lufa.drivers.board.leds"/>

-

-				<build type="header-file" value="Drivers/Board/UC3/EVK1101/Board.h"/>

-				<build type="header-file" value="Drivers/Board/UC3/EVK1101/Buttons.h"/>

-				<build type="header-file" value="Drivers/Board/UC3/EVK1101/Joystick.h"/>

-				<build type="header-file" value="Drivers/Board/UC3/EVK1101/LEDs.h"/>

-

-				<build type="define" name="BOARD" value="BOARD_EVK1101"/>

-			</module>

-

-			<module type="driver" id="lufa.drivers.board#evk1104" caption="Board Support - EVK1104">

-				<build type="doxygen-entry-point" value="Group_BoardInfo_EVK1104"/>

-

-				<device-support value="at32uc3a3256"/>

-

-				<require idref="lufa.drivers.board.buttons"/>

-				<require idref="lufa.drivers.board.leds"/>

-

-				<build type="header-file" value="Drivers/Board/UC3/EVK1104/Board.h"/>

-				<build type="header-file" value="Drivers/Board/UC3/EVK1104/Buttons.h"/>

-				<build type="header-file" value="Drivers/Board/UC3/EVK1104/LEDs.h"/>

-

-				<build type="define" name="BOARD" value="BOARD_EVK1104"/>

-			</module>

-

-			<module type="driver" id="lufa.drivers.board#uc3a3_xplained" caption="Board Support - UC3A3_XPLAINED">

-				<build type="doxygen-entry-point" value="Group_BoardInfo_UC3_A3_XPLAINED"/>

-

-				<device-support value="at32uc3a3256"/>

-

-				<require idref="lufa.drivers.board.buttons"/>

-				<require idref="lufa.drivers.board.leds"/>

-

-				<build type="header-file" value="Drivers/Board/UC3/UC3A3_XPLAINED/Board.h"/>

-				<build type="header-file" value="Drivers/Board/UC3/UC3A3_XPLAINED/Buttons.h"/>

-				<build type="header-file" value="Drivers/Board/UC3/UC3A3_XPLAINED/LEDs.h"/>

-

-				<build type="define" name="BOARD" value="BOARD_UC3A3_XPLAINED"/>

-			</module>

-

-			<module type="driver" id="lufa.drivers.board#stange_isp" caption="Board Support - STANGE_ISP">

-				<build type="doxygen-entry-point" value="Group_BoardInfo_STANGE_ISP"/>

-

-				<device-support value="at90usb162"/>

-

-				<require idref="lufa.drivers.board.buttons"/>

-				<require idref="lufa.drivers.board.leds"/>

-

-				<build type="header-file" value="Drivers/Board/AVR8/STANGE_ISP/Board.h"/>

-				<build type="header-file" value="Drivers/Board/AVR8/STANGE_ISP/Buttons.h"/>

-				<build type="header-file" value="Drivers/Board/AVR8/STANGE_ISP/LEDs.h"/>

-

-				<build type="define" name="BOARD" value="BOARD_STANGE_ISP"/>

-			</module>

-

-			<module type="driver" id="lufa.drivers.board#c3_xplained" caption="Board Support - C3_XPLAINED">

-				<build type="doxygen-entry-point" value="Group_BoardInfo_C3_XPLAINED"/>

-

-				<device-support value="atxmega384c3"/>

-

-				<require idref="lufa.drivers.board.buttons"/>

-				<require idref="lufa.drivers.board.leds"/>

-

-				<build type="header-file" value="Drivers/Board/XMEGA/C3_XPLAINED/Board.h"/>

-				<build type="header-file" value="Drivers/Board/XMEGA/C3_XPLAINED/Buttons.h"/>

-				<build type="header-file" value="Drivers/Board/XMEGA/C3_XPLAINED/LEDs.h"/>

-

-				<build type="define" name="BOARD" value="BOARD_C3_XPLAINED"/>

-			</module>

-

-			<module type="driver" id="lufa.drivers.board#u2s" caption="Board Support - U2S">

-				<build type="doxygen-entry-point" value="Group_BoardInfo_U2S"/>

-

-				<device-support value="atmega32u2"/>

-

-				<require idref="lufa.drivers.board.buttons"/>

-				<require idref="lufa.drivers.board.leds"/>

-

-				<build type="header-file" value="Drivers/Board/AVR8/U2S/Board.h"/>

-				<build type="header-file" value="Drivers/Board/AVR8/U2S/Buttons.h"/>

-				<build type="header-file" value="Drivers/Board/AVR8/U2S/LEDs.h"/>

-

-				<build type="define" name="BOARD" value="BOARD_U2S"/>

-			</module>

-

-			<module type="driver" id="lufa.drivers.board#yun" caption="Board Support - YUN">

-				<build type="doxygen-entry-point" value="Group_BoardInfo_YUN"/>

-

-				<device-support value="atmega32u4"/>

-

-				<require idref="lufa.drivers.board.leds"/>

-

-				<build type="header-file" value="Drivers/Board/AVR8/YUN/Board.h"/>

-				<build type="header-file" value="Drivers/Board/AVR8/YUN/LEDs.h"/>

-

-				<build type="define" name="BOARD" value="BOARD_YUN"/>

-			</module>

-

-			<module type="driver" id="lufa.drivers.board#yun" caption="Board Support - MICRO">

-				<build type="doxygen-entry-point" value="Group_BoardInfo_MICRO"/>

-

-				<device-support value="atmega32u4"/>

-

-				<require idref="lufa.drivers.board.leds"/>

-

-				<build type="header-file" value="Drivers/Board/AVR8/MICRO/Board.h"/>

-				<build type="header-file" value="Drivers/Board/AVR8/MICRO/LEDs.h"/>

-

-				<build type="define" name="BOARD" value="BOARD_MICRO"/>

-			</module>

-		</select-by-config>

-	</asf>

-</lufa>

+<!--
+             LUFA Library
+     Copyright (C) Dean Camera, 2013.
+
+  dean [at] fourwalledcubicle [dot] com
+           www.lufa-lib.org
+-->
+
+<!-- Atmel Studio framework integration file -->
+
+<lufa>
+	<asf>
+		<select-by-config id="lufa.drivers.board" name="lufa.drivers.board.name" default="none" caption="LUFA Board Support">
+			<info type="description" value="summary">
+				Board hardware (LEDs, Buttons, etc.) drivers for the preconfigured LUFA boards. Note that only the boards
+				compatible with the currently selected device will be shown.
+
+				To disable all hardware drivers silently, use NONE. To supply customer drivers, use USER (see manual).
+			</info>
+
+			<module type="driver" id="lufa.drivers.board#none" caption="Board Support - None">
+				<device-support value="avr"/>
+				<build type="define" name="BOARD" value="BOARD_NONE"/>
+			</module>
+
+			<module type="driver" id="lufa.drivers.board#user" caption="Board Support - User Supplied">
+				<device-support value="avr"/>
+				<build type="define" name="BOARD" value="BOARD_USER"/>
+			</module>
+
+			<module type="driver" id="lufa.drivers.board#adafruit_u4" caption="Board Support - ADAFRUITU4">
+				<build type="doxygen-entry-point" value="Group_BoardInfo_ADAFRUITU4"/>
+
+				<device-support value="atmega32u4"/>
+				<build type="define" name="BOARD" value="BOARD_ADAFRUITU4"/>
+
+				<require idref="lufa.drivers.board.leds"/>
+
+				<build type="header-file" value="Drivers/Board/AVR8/ADAFRUITU4/Board.h"/>
+				<build type="header-file" value="Drivers/Board/AVR8/ADAFRUITU4/LEDs.h"/>
+			</module>
+
+			<module type="driver" id="lufa.drivers.board#atavrusbrf01" caption="Board Support - ATAVRUSBRF01">
+				<build type="doxygen-entry-point" value="Group_BoardInfo_ATAVRUSBRF01"/>
+
+				<device-support value="at90usb1287"/>
+				<build type="define" name="BOARD" value="BOARD_ATAVRUSBRF01"/>
+
+				<require idref="lufa.drivers.board.buttons"/>
+				<require idref="lufa.drivers.board.leds"/>
+
+				<build type="header-file" value="Drivers/Board/AVR8/ATAVRUSBRF01/Board.h"/>
+				<build type="header-file" value="Drivers/Board/AVR8/ATAVRUSBRF01/Buttons.h"/>
+				<build type="header-file" value="Drivers/Board/AVR8/ATAVRUSBRF01/LEDs.h"/>
+			</module>
+
+			<module type="driver" id="lufa.drivers.board#benito" caption="Board Support - BENITO">
+				<build type="doxygen-entry-point" value="Group_BoardInfo_BENITO"/>
+
+				<device-support value="at90usb162"/>
+				<build type="define" name="BOARD" value="BOARD_BENITO"/>
+
+				<require idref="lufa.drivers.board.buttons"/>
+				<require idref="lufa.drivers.board.leds"/>
+
+				<build type="header-file" value="Drivers/Board/AVR8/BENITO/Board.h"/>
+				<build type="header-file" value="Drivers/Board/AVR8/BENITO/Buttons.h"/>
+				<build type="header-file" value="Drivers/Board/AVR8/BENITO/LEDs.h"/>
+			</module>
+
+			<module type="driver" id="lufa.drivers.board#big_multio" caption="Board Support - BIGMULTIO">
+				<build type="doxygen-entry-point" value="Group_BoardInfo_BIGMULTIO"/>
+
+				<device-support value="atmega32u4"/>
+				<build type="define" name="BOARD" value="BOARD_BIGMULTIO"/>
+
+				<require idref="lufa.drivers.board.leds"/>
+
+				<build type="header-file" value="Drivers/Board/AVR8/BIGMULTIO/Board.h"/>
+				<build type="header-file" value="Drivers/Board/AVR8/BIGMULTIO/LEDs.h"/>
+			</module>
+
+			<module type="driver" id="lufa.drivers.board#blackcat" caption="Board Support - BLACKCAT">
+				<build type="doxygen-entry-point" value="Group_BoardInfo_BLACKCAT"/>
+
+				<device-support value="at90usb162"/>
+				<build type="define" name="BOARD" value="BOARD_BLACKCAT"/>
+
+				<require idref="lufa.drivers.board.leds"/>
+
+				<build type="header-file" value="Drivers/Board/AVR8/BLACKCAT/Board.h"/>
+				<build type="header-file" value="Drivers/Board/AVR8/BLACKCAT/LEDs.h"/>
+			</module>
+
+			<module type="driver" id="lufa.drivers.board#bui" caption="Board Support - BUI">
+				<build type="doxygen-entry-point" value="Group_BoardInfo_BUI"/>
+
+				<device-support value="at90usb646"/>
+				<build type="define" name="BOARD" value="BOARD_BUI"/>
+
+				<require idref="lufa.drivers.board.leds"/>
+
+				<build type="header-file" value="Drivers/Board/AVR8/BUI/Board.h"/>
+				<build type="header-file" value="Drivers/Board/AVR8/BUI/LEDs.h"/>
+			</module>
+
+			<module type="driver" id="lufa.drivers.board#bumbleb" caption="Board Support - BUMBLEB">
+				<build type="doxygen-entry-point" value="Group_BoardInfo_BUMBLEB"/>
+
+				<device-support value="at90usb162"/>
+				<build type="define" name="BOARD" value="BOARD_BUMBLEB"/>
+
+				<require idref="lufa.drivers.board.buttons"/>
+				<require idref="lufa.drivers.board.leds"/>
+				<require idref="lufa.drivers.board.joystick"/>
+
+				<build type="header-file" value="Drivers/Board/AVR8/BUMBLEB/Board.h"/>
+				<build type="header-file" value="Drivers/Board/AVR8/BUMBLEB/Buttons.h"/>
+				<build type="header-file" value="Drivers/Board/AVR8/BUMBLEB/Joystick.h"/>
+				<build type="header-file" value="Drivers/Board/AVR8/BUMBLEB/LEDs.h"/>
+			</module>
+
+			<module type="driver" id="lufa.drivers.board#culv3" caption="Board Support - CULV3">
+				<build type="doxygen-entry-point" value="Group_BoardInfo_CULV3"/>
+
+				<device-support value="atmega32u4"/>
+				<build type="define" name="BOARD" value="BOARD_CULV3"/>
+
+				<require idref="lufa.drivers.board.buttons"/>
+				<require idref="lufa.drivers.board.leds"/>
+
+				<build type="header-file" value="Drivers/Board/AVR8/CULV3/Board.h"/>
+				<build type="header-file" value="Drivers/Board/AVR8/CULV3/Buttons.h"/>
+				<build type="header-file" value="Drivers/Board/AVR8/CULV3/LEDs.h"/>
+			</module>
+
+			<module type="driver" id="lufa.drivers.board#duce" caption="Board Support - DUCE">
+				<build type="doxygen-entry-point" value="Group_BoardInfo_DUCE"/>
+
+				<device-support value="atmega32u2"/>
+				<build type="define" name="BOARD" value="BOARD_DUCE"/>
+
+				<require idref="lufa.drivers.board.leds"/>
+
+				<build type="header-file" value="Drivers/Board/AVR8/DUCE/Board.h"/>
+				<build type="header-file" value="Drivers/Board/AVR8/DUCE/LEDs.h"/>
+			</module>
+
+			<module type="driver" id="lufa.drivers.board#evk527" caption="Board Support - EVK527">
+				<build type="doxygen-entry-point" value="Group_BoardInfo_EVK527"/>
+
+				<device-support value="atmega32u4"/>
+				<build type="define" name="BOARD" value="BOARD_EVK527"/>
+
+				<require idref="lufa.drivers.misc.at45db321c"/>
+				<require idref="lufa.drivers.peripheral.spi"/>
+				<require idref="lufa.drivers.board.buttons"/>
+				<require idref="lufa.drivers.board.dataflash"/>
+				<require idref="lufa.drivers.board.joystick"/>
+				<require idref="lufa.drivers.board.leds"/>
+
+				<build type="header-file" value="Drivers/Board/AVR8/EVK527/Board.h"/>
+				<build type="header-file" value="Drivers/Board/AVR8/EVK527/Buttons.h"/>
+				<build type="header-file" value="Drivers/Board/AVR8/EVK527/Dataflash.h"/>
+				<build type="header-file" value="Drivers/Board/AVR8/EVK527/Joystick.h"/>
+				<build type="header-file" value="Drivers/Board/AVR8/EVK527/LEDs.h"/>
+			</module>
+
+			<module type="driver" id="lufa.drivers.board#jm_db_u2" caption="Board Support - JMDBU2">
+				<build type="doxygen-entry-point" value="Group_BoardInfo_JMDBU2"/>
+
+				<device-support value="atmega32u2"/>
+				<build type="define" name="BOARD" value="BOARD_JMDBU2"/>
+
+				<require idref="lufa.drivers.board.buttons"/>
+				<require idref="lufa.drivers.board.leds"/>
+
+				<build type="header-file" value="Drivers/Board/AVR8/JMDBU2/Board.h"/>
+				<build type="header-file" value="Drivers/Board/AVR8/JMDBU2/Buttons.h"/>
+				<build type="header-file" value="Drivers/Board/AVR8/JMDBU2/LEDs.h"/>
+			</module>
+
+			<module type="driver" id="lufa.drivers.board#leonardo" caption="Board Support - LEONARDO">
+				<build type="doxygen-entry-point" value="Group_BoardInfo_LEONARDO"/>
+
+				<device-support value="atmega32u4"/>
+				<build type="define" name="BOARD" value="BOARD_LEONARDO"/>
+
+				<require idref="lufa.drivers.board.leds"/>
+
+				<build type="header-file" value="Drivers/Board/AVR8/LEONARDO/Board.h"/>
+				<build type="header-file" value="Drivers/Board/AVR8/LEONARDO/LEDs.h"/>
+			</module>
+
+			<module type="driver" id="lufa.drivers.board#maximus" caption="Board Support - MAXIMUS">
+				<build type="doxygen-entry-point" value="Group_BoardInfo_MAXIMUS"/>
+
+				<device-support value="at90usb162"/>
+				<build type="define" name="BOARD" value="BOARD_MAXIMUS"/>
+
+				<require idref="lufa.drivers.board.leds"/>
+
+				<build type="header-file" value="Drivers/Board/AVR8/MAXIMUS/Board.h"/>
+				<build type="header-file" value="Drivers/Board/AVR8/MAXIMUS/LEDs.h"/>
+			</module>
+
+			<module type="driver" id="lufa.drivers.board#micropendous_32u2" caption="Board Support - MICROPENDOUS_32U2">
+				<build type="doxygen-entry-point" value="Group_BoardInfo_MICROPENDOUS_32U2"/>
+
+				<device-support value="atmega32u2"/>
+				<build type="define" name="BOARD" value="BOARD_MICROPENDOUS_32U2"/>
+
+				<require idref="lufa.drivers.board.leds"/>
+				<require idref="lufa.drivers.board.buttons"/>
+
+				<build type="header-file" value="Drivers/Board/AVR8/MICROPENDOUS/Board.h"/>
+				<build type="header-file" value="Drivers/Board/AVR8/MICROPENDOUS/LEDs.h"/>
+				<build type="header-file" value="Drivers/Board/AVR8/MICROPENDOUS/Buttons.h"/>
+			</module>
+
+			<module type="driver" id="lufa.drivers.board#micropendous_a" caption="Board Support - MICROPENDOUS_A">
+				<build type="doxygen-entry-point" value="Group_BoardInfo_MICROPENDOUS_A"/>
+
+				<device-support value="at90usb1287"/>
+				<build type="define" name="BOARD" value="BOARD_MICROPENDOUS_A"/>
+
+				<require idref="lufa.drivers.board.buttons"/>
+
+				<build type="header-file" value="Drivers/Board/AVR8/MICROPENDOUS/Board.h"/>
+				<build type="header-file" value="Drivers/Board/AVR8/MICROPENDOUS/Buttons.h"/>
+			</module>
+
+			<module type="driver" id="lufa.drivers.board#micropendous_1" caption="Board Support - MICROPENDOUS_1">
+				<build type="doxygen-entry-point" value="Group_BoardInfo_MICROPENDOUS_1"/>
+
+				<device-support value="at90usb162"/>
+				<build type="define" name="BOARD" value="BOARD_MICROPENDOUS_1"/>
+
+				<require idref="lufa.drivers.board.buttons"/>
+
+				<build type="header-file" value="Drivers/Board/AVR8/MICROPENDOUS/Board.h"/>
+				<build type="header-file" value="Drivers/Board/AVR8/MICROPENDOUS/Buttons.h"/>
+			</module>
+
+			<module type="driver" id="lufa.drivers.board#micropendous_2" caption="Board Support - MICROPENDOUS_2">
+				<build type="doxygen-entry-point" value="Group_BoardInfo_MICROPENDOUS_2"/>
+
+				<device-support value="atmega32u4"/>
+				<build type="define" name="BOARD" value="BOARD_MICROPENDOUS_2"/>
+
+				<require idref="lufa.drivers.board.buttons"/>
+
+				<build type="header-file" value="Drivers/Board/AVR8/MICROPENDOUS/Board.h"/>
+				<build type="header-file" value="Drivers/Board/AVR8/MICROPENDOUS/Buttons.h"/>
+			</module>
+
+			<module type="driver" id="lufa.drivers.board#micropendous_3" caption="Board Support - MICROPENDOUS_3">
+				<build type="doxygen-entry-point" value="Group_BoardInfo_MICROPENDOUS_3"/>
+
+				<device-support value="at90usb1287"/>
+				<build type="define" name="BOARD" value="BOARD_MICROPENDOUS_3"/>
+
+				<require idref="lufa.drivers.board.buttons"/>
+
+				<build type="header-file" value="Drivers/Board/AVR8/MICROPENDOUS/Board.h"/>
+				<build type="header-file" value="Drivers/Board/AVR8/MICROPENDOUS/Buttons.h"/>
+			</module>
+
+			<module type="driver" id="lufa.drivers.board#micropendous_4" caption="Board Support - MICROPENDOUS_4">
+				<build type="doxygen-entry-point" value="Group_BoardInfo_MICROPENDOUS_4"/>
+
+				<device-support value="at90usb1287"/>
+				<build type="define" name="BOARD" value="BOARD_MICROPENDOUS_4"/>
+
+				<require idref="lufa.drivers.board.buttons"/>
+
+				<build type="header-file" value="Drivers/Board/AVR8/MICROPENDOUS/Board.h"/>
+				<build type="header-file" value="Drivers/Board/AVR8/MICROPENDOUS/Buttons.h"/>
+			</module>
+
+			<module type="driver" id="lufa.drivers.board#micropendous_dip" caption="Board Support - MICROPENDOUS_DIP">
+				<build type="doxygen-entry-point" value="Group_BoardInfo_MICROPENDOUS_DIP"/>
+
+				<device-support value="at90usb1287"/>
+				<build type="define" name="BOARD" value="BOARD_MICROPENDOUS_DIP"/>
+
+				<require idref="lufa.drivers.board.buttons"/>
+
+				<build type="header-file" value="Drivers/Board/AVR8/MICROPENDOUS/Board.h"/>
+				<build type="header-file" value="Drivers/Board/AVR8/MICROPENDOUS/Buttons.h"/>
+			</module>
+
+			<module type="driver" id="lufa.drivers.board#micropendous_rev1" caption="Board Support - MICROPENDOUS_REV1">
+				<build type="doxygen-entry-point" value="Group_BoardInfo_MICROPENDOUS_REV1"/>
+
+				<device-support value="at90usb1287"/>
+				<build type="define" name="BOARD" value="BOARD_MICROPENDOUS_REV1"/>
+
+				<require idref="lufa.drivers.board.leds"/>
+				<require idref="lufa.drivers.board.buttons"/>
+
+				<build type="header-file" value="Drivers/Board/AVR8/MICROPENDOUS/Board.h"/>
+				<build type="header-file" value="Drivers/Board/AVR8/MICROPENDOUS/LEDs.h"/>
+				<build type="header-file" value="Drivers/Board/AVR8/MICROPENDOUS/Buttons.h"/>
+			</module>
+
+			<module type="driver" id="lufa.drivers.board#micropendous_rev2" caption="Board Support - MICROPENDOUS_REV2">
+				<build type="doxygen-entry-point" value="Group_BoardInfo_MICROPENDOUS_REV2"/>
+
+				<device-support value="at90usb1287"/>
+				<build type="define" name="BOARD" value="BOARD_MICROPENDOUS_REV2"/>
+
+				<require idref="lufa.drivers.board.leds"/>
+				<require idref="lufa.drivers.board.buttons"/>
+
+				<build type="header-file" value="Drivers/Board/AVR8/MICROPENDOUS/Board.h"/>
+				<build type="header-file" value="Drivers/Board/AVR8/MICROPENDOUS/LEDs.h"/>
+				<build type="header-file" value="Drivers/Board/AVR8/MICROPENDOUS/Buttons.h"/>
+			</module>
+
+			<module type="driver" id="lufa.drivers.board#microsin_162" caption="Board Support - MICROSIN162">
+				<build type="doxygen-entry-point" value="Group_BoardInfo_MICROSIN162"/>
+
+				<device-support value="atmega162"/>
+				<build type="define" name="BOARD" value="BOARD_MICROSIN162"/>
+
+				<require idref="lufa.drivers.board.leds"/>
+				<require idref="lufa.drivers.board.buttons"/>
+
+				<build type="header-file" value="Drivers/Board/AVR8/MICROSIN162/Board.h"/>
+				<build type="header-file" value="Drivers/Board/AVR8/MICROSIN162/LEDs.h"/>
+				<build type="header-file" value="Drivers/Board/AVR8/MICROSIN162/Buttons.h"/>
+			</module>
+
+			<module type="driver" id="lufa.drivers.board#minimus" caption="Board Support - MINIMUS">
+				<build type="doxygen-entry-point" value="Group_BoardInfo_MINIMUS"/>
+
+				<device-support value="atmega32u2"/>
+				<build type="define" name="BOARD" value="BOARD_MINIMUS"/>
+
+				<require idref="lufa.drivers.board.leds"/>
+				<require idref="lufa.drivers.board.buttons"/>
+
+				<build type="header-file" value="Drivers/Board/AVR8/MINIMUS/Board.h"/>
+				<build type="header-file" value="Drivers/Board/AVR8/MINIMUS/LEDs.h"/>
+				<build type="header-file" value="Drivers/Board/AVR8/MINIMUS/Buttons.h"/>
+			</module>
+
+			<module type="driver" id="lufa.drivers.board#multio" caption="Board Support - MULTIO">
+				<build type="doxygen-entry-point" value="Group_BoardInfo_MULTIO"/>
+
+				<device-support value="at90usb162"/>
+				<build type="define" name="BOARD" value="BOARD_MULTIO"/>
+
+				<require idref="lufa.drivers.board.leds"/>
+
+				<build type="header-file" value="Drivers/Board/AVR8/MULTIO/Board.h"/>
+				<build type="header-file" value="Drivers/Board/AVR8/MULTIO/LEDs.h"/>
+			</module>
+
+			<module type="driver" id="lufa.drivers.board#olimex_162" caption="Board Support - OLIMEX162">
+				<build type="doxygen-entry-point" value="Group_BoardInfo_OLIMEX162"/>
+
+				<device-support value="at90usb162"/>
+				<build type="define" name="BOARD" value="BOARD_OLIMEX162"/>
+
+				<require idref="lufa.drivers.board.leds"/>
+				<require idref="lufa.drivers.board.buttons"/>
+
+				<build type="header-file" value="Drivers/Board/AVR8/OLIMEX162/Board.h"/>
+				<build type="header-file" value="Drivers/Board/AVR8/OLIMEX162/LEDs.h"/>
+				<build type="header-file" value="Drivers/Board/AVR8/OLIMEX162/Buttons.h"/>
+			</module>
+
+			<module type="driver" id="lufa.drivers.board#olimex_32u4" caption="Board Support - OLIMEX32U4">
+				<build type="doxygen-entry-point" value="Group_BoardInfo_OLIMEX32U4"/>
+
+				<device-support value="atmega32u4"/>
+				<build type="define" name="BOARD" value="BOARD_OLIMEX32U4"/>
+
+				<require idref="lufa.drivers.board.leds"/>
+				<require idref="lufa.drivers.board.buttons"/>
+
+				<build type="header-file" value="Drivers/Board/AVR8/OLIMEX32U4/Board.h"/>
+				<build type="header-file" value="Drivers/Board/AVR8/OLIMEX32U4/LEDs.h"/>
+				<build type="header-file" value="Drivers/Board/AVR8/OLIMEX32U4/Buttons.h"/>
+			</module>
+
+			<module type="driver" id="lufa.drivers.board#olimex_isp_mkii" caption="Board Support - OLIMEXISPMK2">
+				<build type="doxygen-entry-point" value="Group_BoardInfo_OLIMEXISPMK2"/>
+
+				<device-support value="at90usb162"/>
+				<build type="define" name="BOARD" value="BOARD_OLIMEXISPMK2"/>
+
+				<require idref="lufa.drivers.board.leds"/>
+				<require idref="lufa.drivers.board.buttons"/>
+
+				<build type="header-file" value="Drivers/Board/AVR8/OLIMEXISPMK2/Board.h"/>
+				<build type="header-file" value="Drivers/Board/AVR8/OLIMEXISPMK2/LEDs.h"/>
+				<build type="header-file" value="Drivers/Board/AVR8/OLIMEXISPMK2/Buttons.h"/>
+			</module>
+
+			<module type="driver" id="lufa.drivers.board#olimex_t32u4" caption="Board Support - OLIMEX_T32U4">
+				<build type="doxygen-entry-point" value="Group_BoardInfo_OLIMEXT32U4"/>
+
+				<device-support value="atmega32u4"/>
+				<build type="define" name="BOARD" value="BOARD_OLIMEXT32U4"/>
+
+				<require idref="lufa.drivers.board.leds"/>
+				<require idref="lufa.drivers.board.buttons"/>
+
+				<build type="header-file" value="Drivers/Board/AVR8/OLIMEXT32U4/Board.h"/>
+				<build type="header-file" value="Drivers/Board/AVR8/OLIMEXT32U4/LEDs.h"/>
+				<build type="header-file" value="Drivers/Board/AVR8/OLIMEXT32U4/Buttons.h"/>
+			</module>
+
+			<module type="driver" id="lufa.drivers.board#rzusbstick" caption="Board Support - RZUSBSTICK">
+				<build type="doxygen-entry-point" value="Group_BoardInfo_RZUSBSTICK"/>
+
+				<device-support value="at90usb1287"/>
+				<build type="define" name="BOARD" value="BOARD_RZUSBSTICK"/>
+
+				<require idref="lufa.drivers.board.leds"/>
+
+				<build type="header-file" value="Drivers/Board/AVR8/RZUSBSTICK/Board.h"/>
+				<build type="header-file" value="Drivers/Board/AVR8/RZUSBSTICK/LEDs.h"/>
+			</module>
+
+			<module type="driver" id="lufa.drivers.board#sparkfun_8u2" caption="Board Support - SPARKFUN8U2">
+				<build type="doxygen-entry-point" value="Group_BoardInfo_SPARKFUN8U2"/>
+
+				<device-support value="atmega8u2"/>
+				<build type="define" name="BOARD" value="BOARD_SPARKFUN8U2"/>
+
+				<require idref="lufa.drivers.board.leds"/>
+
+				<build type="header-file" value="Drivers/Board/AVR8/SPARKFUN8U2/Board.h"/>
+				<build type="header-file" value="Drivers/Board/AVR8/SPARKFUN8U2/LEDs.h"/>
+			</module>
+
+			<module type="driver" id="lufa.drivers.board#stk525" caption="Board Support - STK525">
+				<build type="doxygen-entry-point" value="Group_BoardInfo_STK525"/>
+
+				<device-support value="at90usb1287"/>
+				<device-support value="at90usb1286"/>
+				<device-support value="at90usb647"/>
+				<device-support value="at90usb646"/>
+				<build type="define" name="BOARD" value="BOARD_STK525"/>
+
+				<require idref="lufa.drivers.misc.at45db321c"/>
+				<require idref="lufa.drivers.peripheral.spi"/>
+				<require idref="lufa.drivers.board.buttons"/>
+				<require idref="lufa.drivers.board.dataflash"/>
+				<require idref="lufa.drivers.board.joystick"/>
+				<require idref="lufa.drivers.board.leds"/>
+
+				<build type="header-file" value="Drivers/Board/AVR8/STK525/Board.h"/>
+				<build type="header-file" value="Drivers/Board/AVR8/STK525/Buttons.h"/>
+				<build type="header-file" value="Drivers/Board/AVR8/STK525/Dataflash.h"/>
+				<build type="header-file" value="Drivers/Board/AVR8/STK525/Joystick.h"/>
+				<build type="header-file" value="Drivers/Board/AVR8/STK525/LEDs.h"/>
+			</module>
+
+			<module type="driver" id="lufa.drivers.board#stk526" caption="Board Support - STK526">
+				<build type="doxygen-entry-point" value="Group_BoardInfo_STK526"/>
+
+				<device-support value="at90usb162"/>
+				<device-support value="at90usb82"/>
+				<device-support value="atmega32u2"/>
+				<device-support value="atmega16u2"/>
+				<device-support value="atmega8u2"/>
+				<build type="define" name="BOARD" value="BOARD_STK526"/>
+
+				<require idref="lufa.drivers.misc.at45db642d"/>
+				<require idref="lufa.drivers.peripheral.spi"/>
+				<require idref="lufa.drivers.board.buttons"/>
+				<require idref="lufa.drivers.board.dataflash"/>
+				<require idref="lufa.drivers.board.joystick"/>
+				<require idref="lufa.drivers.board.leds"/>
+
+				<build type="header-file" value="Drivers/Board/AVR8/STK526/Board.h"/>
+				<build type="header-file" value="Drivers/Board/AVR8/STK526/Buttons.h"/>
+				<build type="header-file" value="Drivers/Board/AVR8/STK526/Dataflash.h"/>
+				<build type="header-file" value="Drivers/Board/AVR8/STK526/Joystick.h"/>
+				<build type="header-file" value="Drivers/Board/AVR8/STK526/LEDs.h"/>
+			</module>
+
+			<module type="driver" id="lufa.drivers.board#teensy" caption="Board Support - TEENSY">
+				<build type="doxygen-entry-point" value="Group_BoardInfo_TEENSY"/>
+
+				<device-support value="at90usb162"/>
+				<build type="define" name="BOARD" value="BOARD_TEENSY"/>
+
+				<require idref="lufa.drivers.board.leds"/>
+
+				<build type="header-file" value="Drivers/Board/AVR8/TEENSY/Board.h"/>
+				<build type="header-file" value="Drivers/Board/AVR8/TEENSY/LEDs.h"/>
+			</module>
+
+			<module type="driver" id="lufa.drivers.board#teensy2" caption="Board Support - TEENSY2">
+				<build type="doxygen-entry-point" value="Group_BoardInfo_TEENSY2"/>
+
+				<device-support value="at90usb646"/>
+				<build type="define" name="BOARD" value="BOARD_TEENSY2"/>
+
+				<require idref="lufa.drivers.board.leds"/>
+
+				<build type="header-file" value="Drivers/Board/AVR8/TEENSY/Board.h"/>
+				<build type="header-file" value="Drivers/Board/AVR8/TEENSY/LEDs.h"/>
+			</module>
+
+			<module type="driver" id="lufa.drivers.board#tul" caption="Board Support - TUL">
+				<build type="doxygen-entry-point" value="Group_BoardInfo_TUL"/>
+
+				<device-support value="atmega32u4"/>
+				<build type="define" name="BOARD" value="BOARD_TUL"/>
+
+				<require idref="lufa.drivers.board.buttons"/>
+				<require idref="lufa.drivers.board.leds"/>
+
+				<build type="header-file" value="Drivers/Board/AVR8/TUL/Board.h"/>
+				<build type="header-file" value="Drivers/Board/AVR8/TUL/Buttons.h"/>
+				<build type="header-file" value="Drivers/Board/AVR8/TUL/LEDs.h"/>
+			</module>
+
+			<module type="driver" id="lufa.drivers.board#udip" caption="Board Support - UDIP">
+				<build type="doxygen-entry-point" value="Group_BoardInfo_UDIP"/>
+
+				<device-support value="atmega32u2"/>
+				<build type="define" name="BOARD" value="BOARD_UDIP"/>
+
+				<require idref="lufa.drivers.board.buttons"/>
+				<require idref="lufa.drivers.board.leds"/>
+
+				<build type="header-file" value="Drivers/Board/AVR8/UDIP/Board.h"/>
+				<build type="header-file" value="Drivers/Board/AVR8/UDIP/Buttons.h"/>
+				<build type="header-file" value="Drivers/Board/AVR8/UDIP/LEDs.h"/>
+			</module>
+
+			<module type="driver" id="lufa.drivers.board#uno" caption="Board Support - UNO">
+				<build type="doxygen-entry-point" value="Group_BoardInfo_UNO"/>
+
+				<device-support value="atmega8u2"/>
+				<device-support value="atmega16u2"/>
+				<build type="define" name="BOARD" value="BOARD_UNO"/>
+
+				<require idref="lufa.drivers.board.leds"/>
+
+				<build type="header-file" value="Drivers/Board/AVR8/UNO/Board.h"/>
+				<build type="header-file" value="Drivers/Board/AVR8/UNO/LEDs.h"/>
+			</module>
+
+			<module type="driver" id="lufa.drivers.board#usb2ax" caption="Board Support - USB2AX">
+				<build type="doxygen-entry-point" value="Group_BoardInfo_USB2AX"/>
+
+				<device-support value="atmega32u2"/>
+				<build type="define" name="BOARD" value="BOARD_USB2AX"/>
+
+				<require idref="lufa.drivers.board.buttons"/>
+				<require idref="lufa.drivers.board.leds"/>
+
+				<build type="header-file" value="Drivers/Board/AVR8/USB2AX/Board.h"/>
+				<build type="header-file" value="Drivers/Board/AVR8/USB2AX/Buttons.h"/>
+				<build type="header-file" value="Drivers/Board/AVR8/USB2AX/LEDs.h"/>
+			</module>
+
+			<module type="driver" id="lufa.drivers.board#usb2ax_v3" caption="Board Support - USB2AX_V3">
+				<build type="doxygen-entry-point" value="Group_BoardInfo_USB2AX_V3"/>
+
+				<device-support value="atmega32u2"/>
+				<build type="define" name="BOARD" value="BOARD_USB2AX_V3"/>
+
+				<require idref="lufa.drivers.board.buttons"/>
+				<require idref="lufa.drivers.board.leds"/>
+
+				<build type="header-file" value="Drivers/Board/AVR8/USB2AX/Board.h"/>
+				<build type="header-file" value="Drivers/Board/AVR8/USB2AX/Buttons.h"/>
+				<build type="header-file" value="Drivers/Board/AVR8/USB2AX/LEDs.h"/>
+			</module>
+
+			<module type="driver" id="lufa.drivers.board#usb2ax_v3_1" caption="Board Support - USB2AX_V31">
+				<build type="doxygen-entry-point" value="Group_BoardInfo_USB2AX_V31"/>
+
+				<device-support value="atmega32u2"/>
+				<build type="define" name="BOARD" value="BOARD_USB2AX_V31"/>
+
+				<require idref="lufa.drivers.board.buttons"/>
+				<require idref="lufa.drivers.board.leds"/>
+
+				<build type="header-file" value="Drivers/Board/AVR8/USB2AX/Board.h"/>
+				<build type="header-file" value="Drivers/Board/AVR8/USB2AX/Buttons.h"/>
+				<build type="header-file" value="Drivers/Board/AVR8/USB2AX/LEDs.h"/>
+			</module>
+
+			<module type="driver" id="lufa.drivers.board#usbfoo" caption="Board Support - USBFOO">
+				<build type="doxygen-entry-point" value="Group_BoardInfo_USBFOO"/>
+
+				<device-support value="atmega162"/>
+				<build type="define" name="BOARD" value="BOARD_USBFOO"/>
+
+				<require idref="lufa.drivers.board.buttons"/>
+				<require idref="lufa.drivers.board.leds"/>
+
+				<build type="header-file" value="Drivers/Board/AVR8/USBFOO/Board.h"/>
+				<build type="header-file" value="Drivers/Board/AVR8/USBFOO/Buttons.h"/>
+				<build type="header-file" value="Drivers/Board/AVR8/USBFOO/LEDs.h"/>
+			</module>
+
+			<module type="driver" id="lufa.drivers.board#usbkey" caption="Board Support - USBKEY">
+				<build type="doxygen-entry-point" value="Group_BoardInfo_USBKEY"/>
+
+				<device-support value="at90usb1287"/>
+				<build type="define" name="BOARD" value="BOARD_USBKEY"/>
+
+				<require idref="lufa.drivers.misc.at45db642d"/>
+				<require idref="lufa.drivers.peripheral.spi"/>
+
+				<require idref="lufa.drivers.board.buttons"/>
+				<require idref="lufa.drivers.board.dataflash"/>
+				<require idref="lufa.drivers.board.joystick"/>
+				<require idref="lufa.drivers.board.leds"/>
+
+				<build type="header-file" value="Drivers/Board/AVR8/USBKEY/Board.h"/>
+				<build type="header-file" value="Drivers/Board/AVR8/USBKEY/Buttons.h"/>
+				<build type="header-file" value="Drivers/Board/AVR8/USBKEY/Dataflash.h"/>
+				<build type="header-file" value="Drivers/Board/AVR8/USBKEY/Joystick.h"/>
+				<build type="header-file" value="Drivers/Board/AVR8/USBKEY/LEDs.h"/>
+			</module>
+
+			<module type="driver" id="lufa.drivers.board#usbtiny_mkii" caption="Board Support - USBTINYMKII">
+				<build type="doxygen-entry-point" value="Group_BoardInfo_USBTINYMKII"/>
+
+				<device-support value="at90usb162"/>
+				<build type="define" name="BOARD" value="BOARD_USBTINYMKII"/>
+
+				<require idref="lufa.drivers.board.buttons"/>
+				<require idref="lufa.drivers.board.leds"/>
+
+				<build type="header-file" value="Drivers/Board/AVR8/USBTINYMKII/Board.h"/>
+				<build type="header-file" value="Drivers/Board/AVR8/USBTINYMKII/Buttons.h"/>
+				<build type="header-file" value="Drivers/Board/AVR8/USBTINYMKII/LEDs.h"/>
+			</module>
+
+			<module type="driver" id="lufa.drivers.board#xplain_rev1" caption="Board Support - XPLAIN (HW Rev 1)">
+				<build type="doxygen-entry-point" value="Group_BoardInfo_XPLAIN_REV1"/>
+
+				<device-support value="at90usb1287"/>
+
+				<require idref="lufa.drivers.misc.at45db642d"/>
+				<require idref="lufa.drivers.peripheral.spi"/>
+				<require idref="lufa.drivers.board.dataflash"/>
+				<require idref="lufa.drivers.board.leds"/>
+
+				<build type="header-file" value="Drivers/Board/AVR8/XPLAIN/Board.h"/>
+				<build type="header-file" value="Drivers/Board/AVR8/XPLAIN/Dataflash.h"/>
+				<build type="header-file" value="Drivers/Board/AVR8/XPLAIN/LEDs.h"/>
+
+				<build type="define" name="BOARD" value="BOARD_XPLAIN_REV1"/>
+			</module>
+
+			<module type="driver" id="lufa.drivers.board#xplain" caption="Board Support - XPLAIN (HW Rev 2+)">
+				<build type="doxygen-entry-point" value="Group_BoardInfo_XPLAIN"/>
+
+				<device-support value="at90usb1287"/>
+
+				<require idref="lufa.drivers.misc.at45db642d"/>
+				<require idref="lufa.drivers.peripheral.spi"/>
+				<require idref="lufa.drivers.board.dataflash"/>
+				<require idref="lufa.drivers.board.leds"/>
+
+				<build type="header-file" value="Drivers/Board/AVR8/XPLAIN/Board.h"/>
+				<build type="header-file" value="Drivers/Board/AVR8/XPLAIN/Dataflash.h"/>
+				<build type="header-file" value="Drivers/Board/AVR8/XPLAIN/LEDs.h"/>
+
+				<build type="define" name="BOARD" value="BOARD_XPLAIN"/>
+			</module>
+
+			<module type="driver" id="lufa.drivers.board#a3bu_xplained" caption="Board Support - A3BU_XPLAINED">
+				<build type="doxygen-entry-point" value="Group_BoardInfo_A3BU_XPLAINED"/>
+
+				<device-support value="atxmega256a3bu"/>
+
+				<require idref="lufa.drivers.misc.at45db642d"/>
+				<require idref="lufa.drivers.peripheral.usart_spi"/>
+
+				<require idref="lufa.drivers.board.buttons"/>
+				<require idref="lufa.drivers.board.dataflash"/>
+				<require idref="lufa.drivers.board.leds"/>
+
+				<build type="header-file" value="Drivers/Board/XMEGA/A3BU_XPLAINED/Board.h"/>
+				<build type="header-file" value="Drivers/Board/XMEGA/A3BU_XPLAINED/Buttons.h"/>
+				<build type="header-file" value="Drivers/Board/XMEGA/A3BU_XPLAINED/Dataflash.h"/>
+				<build type="header-file" value="Drivers/Board/XMEGA/A3BU_XPLAINED/LEDs.h"/>
+
+				<build type="define" name="BOARD" value="BOARD_A3BU_XPLAINED"/>
+			</module>
+
+			<module type="driver" id="lufa.drivers.board#b1_xplained" caption="Board Support - B1_XPLAINED">
+				<build type="doxygen-entry-point" value="Group_BoardInfo_B1_XPLAINED"/>
+
+				<device-support value="atxmega128b1"/>
+
+				<require idref="lufa.drivers.misc.at45db642d"/>
+				<require idref="lufa.drivers.peripheral.usart_spi"/>
+				<require idref="lufa.drivers.board.buttons"/>
+				<require idref="lufa.drivers.board.dataflash"/>
+				<require idref="lufa.drivers.board.leds"/>
+
+				<build type="header-file" value="Drivers/Board/XMEGA/B1_XPLAINED/Board.h"/>
+				<build type="header-file" value="Drivers/Board/XMEGA/B1_XPLAINED/Buttons.h"/>
+				<build type="header-file" value="Drivers/Board/XMEGA/B1_XPLAINED/Dataflash.h"/>
+				<build type="header-file" value="Drivers/Board/XMEGA/B1_XPLAINED/LEDs.h"/>
+
+				<build type="define" name="BOARD" value="BOARD_B1_XPLAINED"/>
+			</module>
+
+			<module type="driver" id="lufa.drivers.board#evk1100" caption="Board Support - EVK1100">
+				<build type="doxygen-entry-point" value="Group_BoardInfo_EVK1100"/>
+
+				<device-support value="at32uc3a0512"/>
+
+				<require idref="lufa.drivers.board.buttons"/>
+				<require idref="lufa.drivers.board.joystick"/>
+				<require idref="lufa.drivers.board.leds"/>
+
+				<build type="header-file" value="Drivers/Board/UC3/EVK1100/Board.h"/>
+				<build type="header-file" value="Drivers/Board/UC3/EVK1100/Buttons.h"/>
+				<build type="header-file" value="Drivers/Board/UC3/EVK1100/Joystick.h"/>
+				<build type="header-file" value="Drivers/Board/UC3/EVK1100/LEDs.h"/>
+
+				<build type="define" name="BOARD" value="BOARD_EVK1100"/>
+			</module>
+
+			<module type="driver" id="lufa.drivers.board#evk1101" caption="Board Support - EVK1101">
+				<build type="doxygen-entry-point" value="Group_BoardInfo_EVK1101"/>
+
+				<device-support value="at32uc3b0256"/>
+
+				<require idref="lufa.drivers.board.buttons"/>
+				<require idref="lufa.drivers.board.joystick"/>
+				<require idref="lufa.drivers.board.leds"/>
+
+				<build type="header-file" value="Drivers/Board/UC3/EVK1101/Board.h"/>
+				<build type="header-file" value="Drivers/Board/UC3/EVK1101/Buttons.h"/>
+				<build type="header-file" value="Drivers/Board/UC3/EVK1101/Joystick.h"/>
+				<build type="header-file" value="Drivers/Board/UC3/EVK1101/LEDs.h"/>
+
+				<build type="define" name="BOARD" value="BOARD_EVK1101"/>
+			</module>
+
+			<module type="driver" id="lufa.drivers.board#evk1104" caption="Board Support - EVK1104">
+				<build type="doxygen-entry-point" value="Group_BoardInfo_EVK1104"/>
+
+				<device-support value="at32uc3a3256"/>
+
+				<require idref="lufa.drivers.board.buttons"/>
+				<require idref="lufa.drivers.board.leds"/>
+
+				<build type="header-file" value="Drivers/Board/UC3/EVK1104/Board.h"/>
+				<build type="header-file" value="Drivers/Board/UC3/EVK1104/Buttons.h"/>
+				<build type="header-file" value="Drivers/Board/UC3/EVK1104/LEDs.h"/>
+
+				<build type="define" name="BOARD" value="BOARD_EVK1104"/>
+			</module>
+
+			<module type="driver" id="lufa.drivers.board#uc3a3_xplained" caption="Board Support - UC3A3_XPLAINED">
+				<build type="doxygen-entry-point" value="Group_BoardInfo_UC3_A3_XPLAINED"/>
+
+				<device-support value="at32uc3a3256"/>
+
+				<require idref="lufa.drivers.board.buttons"/>
+				<require idref="lufa.drivers.board.leds"/>
+
+				<build type="header-file" value="Drivers/Board/UC3/UC3A3_XPLAINED/Board.h"/>
+				<build type="header-file" value="Drivers/Board/UC3/UC3A3_XPLAINED/Buttons.h"/>
+				<build type="header-file" value="Drivers/Board/UC3/UC3A3_XPLAINED/LEDs.h"/>
+
+				<build type="define" name="BOARD" value="BOARD_UC3A3_XPLAINED"/>
+			</module>
+
+			<module type="driver" id="lufa.drivers.board#stange_isp" caption="Board Support - STANGE_ISP">
+				<build type="doxygen-entry-point" value="Group_BoardInfo_STANGE_ISP"/>
+
+				<device-support value="at90usb162"/>
+
+				<require idref="lufa.drivers.board.buttons"/>
+				<require idref="lufa.drivers.board.leds"/>
+
+				<build type="header-file" value="Drivers/Board/AVR8/STANGE_ISP/Board.h"/>
+				<build type="header-file" value="Drivers/Board/AVR8/STANGE_ISP/Buttons.h"/>
+				<build type="header-file" value="Drivers/Board/AVR8/STANGE_ISP/LEDs.h"/>
+
+				<build type="define" name="BOARD" value="BOARD_STANGE_ISP"/>
+			</module>
+
+			<module type="driver" id="lufa.drivers.board#c3_xplained" caption="Board Support - C3_XPLAINED">
+				<build type="doxygen-entry-point" value="Group_BoardInfo_C3_XPLAINED"/>
+
+				<device-support value="atxmega384c3"/>
+
+				<require idref="lufa.drivers.board.buttons"/>
+				<require idref="lufa.drivers.board.leds"/>
+
+				<build type="header-file" value="Drivers/Board/XMEGA/C3_XPLAINED/Board.h"/>
+				<build type="header-file" value="Drivers/Board/XMEGA/C3_XPLAINED/Buttons.h"/>
+				<build type="header-file" value="Drivers/Board/XMEGA/C3_XPLAINED/LEDs.h"/>
+
+				<build type="define" name="BOARD" value="BOARD_C3_XPLAINED"/>
+			</module>
+
+			<module type="driver" id="lufa.drivers.board#u2s" caption="Board Support - U2S">
+				<build type="doxygen-entry-point" value="Group_BoardInfo_U2S"/>
+
+				<device-support value="atmega32u2"/>
+
+				<require idref="lufa.drivers.board.buttons"/>
+				<require idref="lufa.drivers.board.leds"/>
+
+				<build type="header-file" value="Drivers/Board/AVR8/U2S/Board.h"/>
+				<build type="header-file" value="Drivers/Board/AVR8/U2S/Buttons.h"/>
+				<build type="header-file" value="Drivers/Board/AVR8/U2S/LEDs.h"/>
+
+				<build type="define" name="BOARD" value="BOARD_U2S"/>
+			</module>
+
+			<module type="driver" id="lufa.drivers.board#yun" caption="Board Support - YUN">
+				<build type="doxygen-entry-point" value="Group_BoardInfo_YUN"/>
+
+				<device-support value="atmega32u4"/>
+
+				<require idref="lufa.drivers.board.leds"/>
+
+				<build type="header-file" value="Drivers/Board/AVR8/YUN/Board.h"/>
+				<build type="header-file" value="Drivers/Board/AVR8/YUN/LEDs.h"/>
+
+				<build type="define" name="BOARD" value="BOARD_YUN"/>
+			</module>
+
+			<module type="driver" id="lufa.drivers.board#yun" caption="Board Support - MICRO">
+				<build type="doxygen-entry-point" value="Group_BoardInfo_MICRO"/>
+
+				<device-support value="atmega32u4"/>
+
+				<require idref="lufa.drivers.board.leds"/>
+
+				<build type="header-file" value="Drivers/Board/AVR8/MICRO/Board.h"/>
+				<build type="header-file" value="Drivers/Board/AVR8/MICRO/LEDs.h"/>
+
+				<build type="define" name="BOARD" value="BOARD_MICRO"/>
+			</module>
+		</select-by-config>
+	</asf>
+</lufa>
diff --git a/tmk_core/protocol/lufa/LUFA-git/LUFA/StudioIntegration/lufa_drivers_misc.xml b/tmk_core/protocol/lufa/LUFA-git/LUFA/StudioIntegration/lufa_drivers_misc.xml
index 8680ca2dff..4311ae87b7 100644
--- a/tmk_core/protocol/lufa/LUFA-git/LUFA/StudioIntegration/lufa_drivers_misc.xml
+++ b/tmk_core/protocol/lufa/LUFA-git/LUFA/StudioIntegration/lufa_drivers_misc.xml
@@ -1,57 +1,57 @@
-<!--

-             LUFA Library

-     Copyright (C) Dean Camera, 2013.

-

-  dean [at] fourwalledcubicle [dot] com

-           www.lufa-lib.org

--->

-

-<!-- Atmel Studio framework integration file -->

-

-<lufa>

-	<asf>

-		<module type="component" id="lufa.drivers.misc.at45db321c" caption="LUFA AT45DB321C Dataflash Commands">

-			<device-support-alias value="lufa_avr8"/>

-			<device-support-alias value="lufa_xmega"/>

-			<device-support-alias value="lufa_uc3"/>

-

-			<build type="doxygen-entry-point" value="Group_AT45DB321C"/>

-

-			<build type="include-path" value=".."/>

-			<build type="header-file" subtype="api" value="Drivers/Misc/AT45DB321C.h"/>

-		</module>

-

-		<module type="component" id="lufa.drivers.misc.at45db642d" caption="LUFA AT45DB642D Dataflash Commands">

-			<device-support-alias value="lufa_avr8"/>

-			<device-support-alias value="lufa_xmega"/>

-			<device-support-alias value="lufa_uc3"/>

-

-			<build type="doxygen-entry-point" value="Group_AT45DB321C"/>

-

-			<build type="include-path" value=".."/>

-			<build type="header-file" subtype="api" value="Drivers/Misc/AT45DB642D.h"/>

-		</module>

-

-		<module type="service" id="lufa.drivers.misc.ringbuffer" caption="LUFA Ring Buffer">

-			<device-support-alias value="lufa_avr8"/>

-			<device-support-alias value="lufa_xmega"/>

-			<device-support-alias value="lufa_uc3"/>

-

-			<build type="doxygen-entry-point" value="Group_RingBuff"/>

-

-			<build type="include-path" value=".."/>

-			<build type="header-file" subtype="api" value="Drivers/Misc/RingBuffer.h"/>

-		</module>

-

-		<module type="service" id="lufa.drivers.misc.ansi" caption="LUFA ANSI Terminal Commands">

-			<device-support-alias value="lufa_avr8"/>

-			<device-support-alias value="lufa_xmega"/>

-			<device-support-alias value="lufa_uc3"/>

-

-			<build type="doxygen-entry-point" value="Group_Terminal"/>

-

-			<build type="include-path" value=".."/>

-			<build type="header-file" subtype="api" value="Drivers/Misc/TerminalCodes.h"/>

-		</module>

-	</asf>

+<!--
+             LUFA Library
+     Copyright (C) Dean Camera, 2013.
+
+  dean [at] fourwalledcubicle [dot] com
+           www.lufa-lib.org
+-->
+
+<!-- Atmel Studio framework integration file -->
+
+<lufa>
+	<asf>
+		<module type="component" id="lufa.drivers.misc.at45db321c" caption="LUFA AT45DB321C Dataflash Commands">
+			<device-support-alias value="lufa_avr8"/>
+			<device-support-alias value="lufa_xmega"/>
+			<device-support-alias value="lufa_uc3"/>
+
+			<build type="doxygen-entry-point" value="Group_AT45DB321C"/>
+
+			<build type="include-path" value=".."/>
+			<build type="header-file" subtype="api" value="Drivers/Misc/AT45DB321C.h"/>
+		</module>
+
+		<module type="component" id="lufa.drivers.misc.at45db642d" caption="LUFA AT45DB642D Dataflash Commands">
+			<device-support-alias value="lufa_avr8"/>
+			<device-support-alias value="lufa_xmega"/>
+			<device-support-alias value="lufa_uc3"/>
+
+			<build type="doxygen-entry-point" value="Group_AT45DB321C"/>
+
+			<build type="include-path" value=".."/>
+			<build type="header-file" subtype="api" value="Drivers/Misc/AT45DB642D.h"/>
+		</module>
+
+		<module type="service" id="lufa.drivers.misc.ringbuffer" caption="LUFA Ring Buffer">
+			<device-support-alias value="lufa_avr8"/>
+			<device-support-alias value="lufa_xmega"/>
+			<device-support-alias value="lufa_uc3"/>
+
+			<build type="doxygen-entry-point" value="Group_RingBuff"/>
+
+			<build type="include-path" value=".."/>
+			<build type="header-file" subtype="api" value="Drivers/Misc/RingBuffer.h"/>
+		</module>
+
+		<module type="service" id="lufa.drivers.misc.ansi" caption="LUFA ANSI Terminal Commands">
+			<device-support-alias value="lufa_avr8"/>
+			<device-support-alias value="lufa_xmega"/>
+			<device-support-alias value="lufa_uc3"/>
+
+			<build type="doxygen-entry-point" value="Group_Terminal"/>
+
+			<build type="include-path" value=".."/>
+			<build type="header-file" subtype="api" value="Drivers/Misc/TerminalCodes.h"/>
+		</module>
+	</asf>
 </lufa>
\ No newline at end of file
diff --git a/tmk_core/protocol/lufa/LUFA-git/LUFA/StudioIntegration/lufa_drivers_peripheral.xml b/tmk_core/protocol/lufa/LUFA-git/LUFA/StudioIntegration/lufa_drivers_peripheral.xml
index 3a982e565f..76ea516dbc 100644
--- a/tmk_core/protocol/lufa/LUFA-git/LUFA/StudioIntegration/lufa_drivers_peripheral.xml
+++ b/tmk_core/protocol/lufa/LUFA-git/LUFA/StudioIntegration/lufa_drivers_peripheral.xml
@@ -1,198 +1,198 @@
-<!--

-             LUFA Library

-     Copyright (C) Dean Camera, 2013.

-

-  dean [at] fourwalledcubicle [dot] com

-           www.lufa-lib.org

--->

-

-<!-- Atmel Studio framework integration file -->

-

-<lufa>

-	<asf>

-		<select-by-device id="lufa.drivers.peripheral.usart" caption="LUFA USART Driver">

-			<module type="driver" id="lufa.drivers.peripheral.usart#avr8" caption="LUFA USART Driver - AVR8">

-				<device-support-alias value="lufa_avr8"/>

-

-				<build type="doxygen-entry-point" value="Group_Serial"/>

-

-				<require idref="lufa.common"/>

-				<require idref="lufa.drivers.misc.ansi"/>

-

-				<build type="c-source" value="Drivers/Peripheral/AVR8/Serial_AVR8.c"/>

-				<build type="header-file" value="Drivers/Peripheral/AVR8/Serial_AVR8.h"/>

-				<build type="include-path" value=".."/>

-				<build type="header-file" subtype="api" value="Drivers/Peripheral/Serial.h"/>

-			</module>

-

-			<module type="driver" id="lufa.drivers.peripheral.usart#xmega" caption="LUFA USART Driver - AVR8">

-				<device-support-alias value="lufa_xmega"/>

-

-				<build type="doxygen-entry-point" value="Group_Serial"/>

-

-				<require idref="lufa.common"/>

-				<require idref="lufa.drivers.misc.ansi"/>

-

-				<build type="c-source" value="Drivers/Peripheral/XMEGA/Serial_XMEGA.c"/>

-				<build type="header-file" value="Drivers/Peripheral/XMEGA/Serial_XMEGA.h"/>

-				<build type="include-path" value=".."/>

-				<build type="header-file" subtype="api" value="Drivers/Peripheral/Serial.h"/>

-			</module>

-

-			<module type="driver" id="lufa.drivers.peripheral.usart#uc3" caption="LUFA USART Driver - UC3">

-				<device-support-alias value="lufa_uc3"/>

-

-				<build type="doxygen-entry-point" value="Group_Serial"/>

-

-				<require idref="lufa.common"/>

-				<require idref="lufa.drivers.misc.ansi"/>

-

-				<info type="gui-flag" value="hidden"/>

-			</module>

-		</select-by-device>

-

-		<select-by-device id="lufa.drivers.peripheral.spi" caption="LUFA SPI Driver">

-			<module type="driver" id="lufa.drivers.peripheral.spi#avr8" caption="LUFA SPI Driver - AVR8">

-				<device-support-alias value="lufa_avr8"/>

-

-				<build type="doxygen-entry-point" value="Group_SPI"/>

-

-				<require idref="lufa.common"/>

-

-				<build type="header-file" value="Drivers/Peripheral/AVR8/SPI_AVR8.h"/>

-				<build type="include-path" value=".."/>

-				<build type="header-file" subtype="api" value="Drivers/Peripheral/SPI.h"/>

-			</module>

-

-			<module type="driver" id="lufa.drivers.peripheral.spi#xmega" caption="LUFA SPI Driver - XMEGA">

-				<device-support-alias value="lufa_xmega"/>

-

-				<build type="doxygen-entry-point" value="Group_SPI"/>

-

-				<require idref="lufa.common"/>

-

-				<build type="header-file" value="Drivers/Peripheral/XMEGA/SPI_XMEGA.h"/>

-				<build type="include-path" value=".."/>

-				<build type="header-file" subtype="api" value="Drivers/Peripheral/SPI.h"/>

-			</module>

-

-			<module type="driver" id="lufa.drivers.peripheral.spi#uc3" caption="LUFA SPI Driver - UC3">

-				<device-support-alias value="lufa_uc3"/>

-

-				<build type="doxygen-entry-point" value="Group_SPI"/>

-

-				<require idref="lufa.common"/>

-

-				<info type="gui-flag" value="hidden"/>

-			</module>

-		</select-by-device>

-

-		<select-by-device id="lufa.drivers.peripheral.usart_spi" caption="LUFA USART SPI Driver">

-			<module type="driver" id="lufa.drivers.peripheral.usart_spi#avr8" caption="LUFA USART SPI Driver - AVR8">

-				<device-support-alias value="lufa_avr8"/>

-

-				<build type="doxygen-entry-point" value="Group_SerialSPI"/>

-

-				<require idref="lufa.common"/>

-

-				<build type="header-file" value="Drivers/Peripheral/AVR8/SerialSPI_AVR8.h"/>

-				<build type="include-path" value=".."/>

-				<build type="header-file" subtype="api"  value="Drivers/Peripheral/SerialSPI.h"/>

-			</module>

-

-			<module type="driver" id="lufa.drivers.peripheral.usart_spi#xmega" caption="LUFA USART SPI Driver - XMEGA">

-				<device-support-alias value="lufa_xmega"/>

-

-				<build type="doxygen-entry-point" value="Group_SerialSPI"/>

-

-				<require idref="lufa.common"/>

-

-				<build type="header-file" value="Drivers/Peripheral/XMEGA/SerialSPI_XMEGA.h"/>

-				<build type="include-path" value=".."/>

-				<build type="header-file" subtype="api" value="Drivers/Peripheral/SerialSPI.h"/>

-			</module>

-

-			<module type="driver" id="lufa.drivers.peripheral.usart_spi#uc3" caption="LUFA USART SPI Driver - UC3">

-				<device-support-alias value="lufa_uc3"/>

-

-				<build type="doxygen-entry-point" value="Group_SerialSPI"/>

-

-				<require idref="lufa.common"/>

-

-				<info type="gui-flag" value="hidden"/>

-			</module>

-		</select-by-device>

-

-		<select-by-device id="lufa.drivers.peripheral.twi" caption="LUFA TWI Master Driver">

-			<module type="driver" id="lufa.drivers.peripheral.twi#avr8" caption="LUFA TWI Master Driver - AVR8">

-				<device-support-alias value="lufa_avr8"/>

-

-				<build type="doxygen-entry-point" value="Group_TWI"/>

-

-				<require idref="lufa.common"/>

-

-				<build type="c-source" value="Drivers/Peripheral/AVR8/TWI_AVR8.c"/>

-				<build type="header-file" value="Drivers/Peripheral/AVR8/TWI_AVR8.h"/>

-				<build type="include-path" value=".."/>

-				<build type="header-file" subtype="api" value="Drivers/Peripheral/TWI.h"/>

-			</module>

-

-			<module type="driver" id="lufa.drivers.peripheral.twi#xmega" caption="LUFA TWI Master Driver - XMEGA">

-				<device-support-alias value="lufa_xmega"/>

-

-				<build type="doxygen-entry-point" value="Group_TWI"/>

-

-				<require idref="lufa.common"/>

-

-				<build type="c-source" value="Drivers/Peripheral/XMEGA/TWI_XMEGA.c"/>

-				<build type="header-file" value="Drivers/Peripheral/XMEGA/TWI_XMEGA.h"/>

-				<build type="include-path" value=".."/>

-				<build type="header-file" subtype="api" value="Drivers/Peripheral/TWI.h"/>

-			</module>

-

-			<module type="driver" id="lufa.drivers.peripheral.twi#uc3" caption="LUFA TWI Master Driver - UC3">

-				<device-support-alias value="lufa_uc3"/>

-

-				<build type="doxygen-entry-point" value="Group_TWI"/>

-

-				<require idref="lufa.common"/>

-

-				<info type="gui-flag" value="hidden"/>

-			</module>

-		</select-by-device>

-

-		<select-by-device id="lufa.drivers.peripheral.adc" caption="LUFA ADC Driver">

-			<module type="driver" id="lufa.drivers.peripheral.adc#avr8" caption="LUFA ADC Driver - AVR8">

-				<device-support-alias value="lufa_avr8"/>

-

-				<build type="doxygen-entry-point" value="Group_ADC"/>

-

-				<require idref="lufa.common"/>

-

-				<build type="header-file" value="Drivers/Peripheral/AVR8/ADC_AVR8.h"/>

-				<build type="include-path" value=".."/>

-				<build type="header-file" subtype="api" value="Drivers/Peripheral/ADC.h"/>

-			</module>

-

-			<module type="driver" id="lufa.drivers.peripheral.adc#xmega" caption="LUFA ADC Driver - XMEGA">

-				<device-support-alias value="lufa_xmega"/>

-

-				<build type="doxygen-entry-point" value="Group_ADC"/>

-

-				<require idref="lufa.common"/>

-

-				<info type="gui-flag" value="hidden"/>

-			</module>

-

-			<module type="driver" id="lufa.drivers.peripheral.adc#uc3" caption="LUFA ADC Driver - UC3">

-				<device-support-alias value="lufa_uc3"/>

-

-				<build type="doxygen-entry-point" value="Group_ADC"/>

-

-				<require idref="lufa.common"/>

-

-				<info type="gui-flag" value="hidden"/>

-			</module>

-		</select-by-device>

-	</asf>

-</lufa>

+<!--
+             LUFA Library
+     Copyright (C) Dean Camera, 2013.
+
+  dean [at] fourwalledcubicle [dot] com
+           www.lufa-lib.org
+-->
+
+<!-- Atmel Studio framework integration file -->
+
+<lufa>
+	<asf>
+		<select-by-device id="lufa.drivers.peripheral.usart" caption="LUFA USART Driver">
+			<module type="driver" id="lufa.drivers.peripheral.usart#avr8" caption="LUFA USART Driver - AVR8">
+				<device-support-alias value="lufa_avr8"/>
+
+				<build type="doxygen-entry-point" value="Group_Serial"/>
+
+				<require idref="lufa.common"/>
+				<require idref="lufa.drivers.misc.ansi"/>
+
+				<build type="c-source" value="Drivers/Peripheral/AVR8/Serial_AVR8.c"/>
+				<build type="header-file" value="Drivers/Peripheral/AVR8/Serial_AVR8.h"/>
+				<build type="include-path" value=".."/>
+				<build type="header-file" subtype="api" value="Drivers/Peripheral/Serial.h"/>
+			</module>
+
+			<module type="driver" id="lufa.drivers.peripheral.usart#xmega" caption="LUFA USART Driver - AVR8">
+				<device-support-alias value="lufa_xmega"/>
+
+				<build type="doxygen-entry-point" value="Group_Serial"/>
+
+				<require idref="lufa.common"/>
+				<require idref="lufa.drivers.misc.ansi"/>
+
+				<build type="c-source" value="Drivers/Peripheral/XMEGA/Serial_XMEGA.c"/>
+				<build type="header-file" value="Drivers/Peripheral/XMEGA/Serial_XMEGA.h"/>
+				<build type="include-path" value=".."/>
+				<build type="header-file" subtype="api" value="Drivers/Peripheral/Serial.h"/>
+			</module>
+
+			<module type="driver" id="lufa.drivers.peripheral.usart#uc3" caption="LUFA USART Driver - UC3">
+				<device-support-alias value="lufa_uc3"/>
+
+				<build type="doxygen-entry-point" value="Group_Serial"/>
+
+				<require idref="lufa.common"/>
+				<require idref="lufa.drivers.misc.ansi"/>
+
+				<info type="gui-flag" value="hidden"/>
+			</module>
+		</select-by-device>
+
+		<select-by-device id="lufa.drivers.peripheral.spi" caption="LUFA SPI Driver">
+			<module type="driver" id="lufa.drivers.peripheral.spi#avr8" caption="LUFA SPI Driver - AVR8">
+				<device-support-alias value="lufa_avr8"/>
+
+				<build type="doxygen-entry-point" value="Group_SPI"/>
+
+				<require idref="lufa.common"/>
+
+				<build type="header-file" value="Drivers/Peripheral/AVR8/SPI_AVR8.h"/>
+				<build type="include-path" value=".."/>
+				<build type="header-file" subtype="api" value="Drivers/Peripheral/SPI.h"/>
+			</module>
+
+			<module type="driver" id="lufa.drivers.peripheral.spi#xmega" caption="LUFA SPI Driver - XMEGA">
+				<device-support-alias value="lufa_xmega"/>
+
+				<build type="doxygen-entry-point" value="Group_SPI"/>
+
+				<require idref="lufa.common"/>
+
+				<build type="header-file" value="Drivers/Peripheral/XMEGA/SPI_XMEGA.h"/>
+				<build type="include-path" value=".."/>
+				<build type="header-file" subtype="api" value="Drivers/Peripheral/SPI.h"/>
+			</module>
+
+			<module type="driver" id="lufa.drivers.peripheral.spi#uc3" caption="LUFA SPI Driver - UC3">
+				<device-support-alias value="lufa_uc3"/>
+
+				<build type="doxygen-entry-point" value="Group_SPI"/>
+
+				<require idref="lufa.common"/>
+
+				<info type="gui-flag" value="hidden"/>
+			</module>
+		</select-by-device>
+
+		<select-by-device id="lufa.drivers.peripheral.usart_spi" caption="LUFA USART SPI Driver">
+			<module type="driver" id="lufa.drivers.peripheral.usart_spi#avr8" caption="LUFA USART SPI Driver - AVR8">
+				<device-support-alias value="lufa_avr8"/>
+
+				<build type="doxygen-entry-point" value="Group_SerialSPI"/>
+
+				<require idref="lufa.common"/>
+
+				<build type="header-file" value="Drivers/Peripheral/AVR8/SerialSPI_AVR8.h"/>
+				<build type="include-path" value=".."/>
+				<build type="header-file" subtype="api"  value="Drivers/Peripheral/SerialSPI.h"/>
+			</module>
+
+			<module type="driver" id="lufa.drivers.peripheral.usart_spi#xmega" caption="LUFA USART SPI Driver - XMEGA">
+				<device-support-alias value="lufa_xmega"/>
+
+				<build type="doxygen-entry-point" value="Group_SerialSPI"/>
+
+				<require idref="lufa.common"/>
+
+				<build type="header-file" value="Drivers/Peripheral/XMEGA/SerialSPI_XMEGA.h"/>
+				<build type="include-path" value=".."/>
+				<build type="header-file" subtype="api" value="Drivers/Peripheral/SerialSPI.h"/>
+			</module>
+
+			<module type="driver" id="lufa.drivers.peripheral.usart_spi#uc3" caption="LUFA USART SPI Driver - UC3">
+				<device-support-alias value="lufa_uc3"/>
+
+				<build type="doxygen-entry-point" value="Group_SerialSPI"/>
+
+				<require idref="lufa.common"/>
+
+				<info type="gui-flag" value="hidden"/>
+			</module>
+		</select-by-device>
+
+		<select-by-device id="lufa.drivers.peripheral.twi" caption="LUFA TWI Master Driver">
+			<module type="driver" id="lufa.drivers.peripheral.twi#avr8" caption="LUFA TWI Master Driver - AVR8">
+				<device-support-alias value="lufa_avr8"/>
+
+				<build type="doxygen-entry-point" value="Group_TWI"/>
+
+				<require idref="lufa.common"/>
+
+				<build type="c-source" value="Drivers/Peripheral/AVR8/TWI_AVR8.c"/>
+				<build type="header-file" value="Drivers/Peripheral/AVR8/TWI_AVR8.h"/>
+				<build type="include-path" value=".."/>
+				<build type="header-file" subtype="api" value="Drivers/Peripheral/TWI.h"/>
+			</module>
+
+			<module type="driver" id="lufa.drivers.peripheral.twi#xmega" caption="LUFA TWI Master Driver - XMEGA">
+				<device-support-alias value="lufa_xmega"/>
+
+				<build type="doxygen-entry-point" value="Group_TWI"/>
+
+				<require idref="lufa.common"/>
+
+				<build type="c-source" value="Drivers/Peripheral/XMEGA/TWI_XMEGA.c"/>
+				<build type="header-file" value="Drivers/Peripheral/XMEGA/TWI_XMEGA.h"/>
+				<build type="include-path" value=".."/>
+				<build type="header-file" subtype="api" value="Drivers/Peripheral/TWI.h"/>
+			</module>
+
+			<module type="driver" id="lufa.drivers.peripheral.twi#uc3" caption="LUFA TWI Master Driver - UC3">
+				<device-support-alias value="lufa_uc3"/>
+
+				<build type="doxygen-entry-point" value="Group_TWI"/>
+
+				<require idref="lufa.common"/>
+
+				<info type="gui-flag" value="hidden"/>
+			</module>
+		</select-by-device>
+
+		<select-by-device id="lufa.drivers.peripheral.adc" caption="LUFA ADC Driver">
+			<module type="driver" id="lufa.drivers.peripheral.adc#avr8" caption="LUFA ADC Driver - AVR8">
+				<device-support-alias value="lufa_avr8"/>
+
+				<build type="doxygen-entry-point" value="Group_ADC"/>
+
+				<require idref="lufa.common"/>
+
+				<build type="header-file" value="Drivers/Peripheral/AVR8/ADC_AVR8.h"/>
+				<build type="include-path" value=".."/>
+				<build type="header-file" subtype="api" value="Drivers/Peripheral/ADC.h"/>
+			</module>
+
+			<module type="driver" id="lufa.drivers.peripheral.adc#xmega" caption="LUFA ADC Driver - XMEGA">
+				<device-support-alias value="lufa_xmega"/>
+
+				<build type="doxygen-entry-point" value="Group_ADC"/>
+
+				<require idref="lufa.common"/>
+
+				<info type="gui-flag" value="hidden"/>
+			</module>
+
+			<module type="driver" id="lufa.drivers.peripheral.adc#uc3" caption="LUFA ADC Driver - UC3">
+				<device-support-alias value="lufa_uc3"/>
+
+				<build type="doxygen-entry-point" value="Group_ADC"/>
+
+				<require idref="lufa.common"/>
+
+				<info type="gui-flag" value="hidden"/>
+			</module>
+		</select-by-device>
+	</asf>
+</lufa>
diff --git a/tmk_core/protocol/lufa/LUFA-git/LUFA/StudioIntegration/lufa_drivers_usb.xml b/tmk_core/protocol/lufa/LUFA-git/LUFA/StudioIntegration/lufa_drivers_usb.xml
index 7ff4b39492..263c411dff 100644
--- a/tmk_core/protocol/lufa/LUFA-git/LUFA/StudioIntegration/lufa_drivers_usb.xml
+++ b/tmk_core/protocol/lufa/LUFA-git/LUFA/StudioIntegration/lufa_drivers_usb.xml
@@ -1,32 +1,32 @@
-<!--

-             LUFA Library

-     Copyright (C) Dean Camera, 2013.

-

-  dean [at] fourwalledcubicle [dot] com

-           www.lufa-lib.org

--->

-

-<!-- Atmel Studio framework integration file -->

-

-<lufa>

-	<asf>

-		<module type="driver" id="lufa.drivers.usb" caption="LUFA USB Driver">

-			<device-support-alias value="lufa_avr8"/>

-			<device-support-alias value="lufa_xmega"/>

-			<device-support-alias value="lufa_uc3"/>

-

-			<build type="doxygen-entry-point" value="Group_USB"/>

-

-			<build type="define" name="USE_LUFA_CONFIG_HEADER" value=""/>

-			<build type="module-config" subtype="path" value="CodeTemplates"/>

-			<build type="module-config" subtype="required-header-file" value="LUFAConfig.h"/>

-

-			<build type="include-path" value=".."/>

-			<build type="header-file" subtype="api" value="Drivers/USB/USB.h"/>

-

-			<require idref="lufa.common"/>

-			<require idref="lufa.drivers.usb.class"/>

-			<require idref="lufa.drivers.usb.core"/>

-		</module>

-	</asf>

+<!--
+             LUFA Library
+     Copyright (C) Dean Camera, 2013.
+
+  dean [at] fourwalledcubicle [dot] com
+           www.lufa-lib.org
+-->
+
+<!-- Atmel Studio framework integration file -->
+
+<lufa>
+	<asf>
+		<module type="driver" id="lufa.drivers.usb" caption="LUFA USB Driver">
+			<device-support-alias value="lufa_avr8"/>
+			<device-support-alias value="lufa_xmega"/>
+			<device-support-alias value="lufa_uc3"/>
+
+			<build type="doxygen-entry-point" value="Group_USB"/>
+
+			<build type="define" name="USE_LUFA_CONFIG_HEADER" value=""/>
+			<build type="module-config" subtype="path" value="CodeTemplates"/>
+			<build type="module-config" subtype="required-header-file" value="LUFAConfig.h"/>
+
+			<build type="include-path" value=".."/>
+			<build type="header-file" subtype="api" value="Drivers/USB/USB.h"/>
+
+			<require idref="lufa.common"/>
+			<require idref="lufa.drivers.usb.class"/>
+			<require idref="lufa.drivers.usb.core"/>
+		</module>
+	</asf>
 </lufa>
\ No newline at end of file
diff --git a/tmk_core/protocol/lufa/LUFA-git/LUFA/StudioIntegration/lufa_drivers_usb_class.xml b/tmk_core/protocol/lufa/LUFA-git/LUFA/StudioIntegration/lufa_drivers_usb_class.xml
index cd18bf10e7..67ab760d33 100644
--- a/tmk_core/protocol/lufa/LUFA-git/LUFA/StudioIntegration/lufa_drivers_usb_class.xml
+++ b/tmk_core/protocol/lufa/LUFA-git/LUFA/StudioIntegration/lufa_drivers_usb_class.xml
@@ -1,32 +1,32 @@
-<!--

-             LUFA Library

-     Copyright (C) Dean Camera, 2013.

-

-  dean [at] fourwalledcubicle [dot] com

-           www.lufa-lib.org

--->

-

-<!-- Atmel Studio framework integration file -->

-

-<lufa>

-	<asf>

-		<module type="service" id="lufa.drivers.usb.class" caption="LUFA USB Class Drivers">

-			<device-support-alias value="lufa_avr8"/>

-			<device-support-alias value="lufa_xmega"/>

-			<device-support-alias value="lufa_uc3"/>

-

-			<info type="gui-flag" value="hidden"/>

-			<build type="doxygen-entry-point" value="Group_USBClassDrivers"/>

-

-			<require idref="lufa.drivers.usb.class.android"/>

-			<require idref="lufa.drivers.usb.class.audio"/>

-			<require idref="lufa.drivers.usb.class.cdc"/>

-			<require idref="lufa.drivers.usb.class.hid"/>

-			<require idref="lufa.drivers.usb.class.ms"/>

-			<require idref="lufa.drivers.usb.class.midi"/>

-			<require idref="lufa.drivers.usb.class.printer"/>

-			<require idref="lufa.drivers.usb.class.rndis"/>

-			<require idref="lufa.drivers.usb.class.si"/>

-		</module>

-	</asf>

-</lufa>

+<!--
+             LUFA Library
+     Copyright (C) Dean Camera, 2013.
+
+  dean [at] fourwalledcubicle [dot] com
+           www.lufa-lib.org
+-->
+
+<!-- Atmel Studio framework integration file -->
+
+<lufa>
+	<asf>
+		<module type="service" id="lufa.drivers.usb.class" caption="LUFA USB Class Drivers">
+			<device-support-alias value="lufa_avr8"/>
+			<device-support-alias value="lufa_xmega"/>
+			<device-support-alias value="lufa_uc3"/>
+
+			<info type="gui-flag" value="hidden"/>
+			<build type="doxygen-entry-point" value="Group_USBClassDrivers"/>
+
+			<require idref="lufa.drivers.usb.class.android"/>
+			<require idref="lufa.drivers.usb.class.audio"/>
+			<require idref="lufa.drivers.usb.class.cdc"/>
+			<require idref="lufa.drivers.usb.class.hid"/>
+			<require idref="lufa.drivers.usb.class.ms"/>
+			<require idref="lufa.drivers.usb.class.midi"/>
+			<require idref="lufa.drivers.usb.class.printer"/>
+			<require idref="lufa.drivers.usb.class.rndis"/>
+			<require idref="lufa.drivers.usb.class.si"/>
+		</module>
+	</asf>
+</lufa>
diff --git a/tmk_core/protocol/lufa/LUFA-git/LUFA/StudioIntegration/lufa_drivers_usb_core.xml b/tmk_core/protocol/lufa/LUFA-git/LUFA/StudioIntegration/lufa_drivers_usb_core.xml
index 58f8917ef4..58a0b388f6 100644
--- a/tmk_core/protocol/lufa/LUFA-git/LUFA/StudioIntegration/lufa_drivers_usb_core.xml
+++ b/tmk_core/protocol/lufa/LUFA-git/LUFA/StudioIntegration/lufa_drivers_usb_core.xml
@@ -1,85 +1,85 @@
-<!--

-             LUFA Library

-     Copyright (C) Dean Camera, 2013.

-

-  dean [at] fourwalledcubicle [dot] com

-           www.lufa-lib.org

--->

-

-<!-- Atmel Studio framework integration file -->

-

-<lufa>

-	<asf>

-		<module type="driver" id="lufa.drivers.usb.core.common" caption="LUFA USB Core Driver - Common">

-			<device-support-alias value="lufa_avr8"/>

-			<device-support-alias value="lufa_xmega"/>

-			<device-support-alias value="lufa_uc3"/>

-

-			<build type="doxygen-entry-point" value="Group_USBManagement"/>

-

-			<info type="gui-flag" value="hidden"/>

-

-			<build type="header-file" value="Drivers/USB/Core/Device.h"/>

-			<build type="header-file" value="Drivers/USB/Core/Endpoint.h"/>

-			<build type="header-file" value="Drivers/USB/Core/Host.h"/>

-			<build type="header-file" value="Drivers/USB/Core/Pipe.h"/>

-			<build type="header-file" value="Drivers/USB/Core/OTG.h"/>

-			<build type="header-file" value="Drivers/USB/Core/USBController.h"/>

-			<build type="header-file" value="Drivers/USB/Core/USBInterrupt.h"/>

-			<build type="header-file" value="Drivers/USB/Core/EndpointStream.h"/>

-			<build type="header-file" value="Drivers/USB/Core/PipeStream.h"/>

-	        <build type="c-source"    value="Drivers/USB/Core/ConfigDescriptors.c"/>

-			<build type="header-file" value="Drivers/USB/Core/ConfigDescriptors.h"/>

-	        <build type="c-source"    value="Drivers/USB/Core/DeviceStandardReq.c"/>

-			<build type="header-file" value="Drivers/USB/Core/DeviceStandardReq.h"/>

-	        <build type="c-source"    value="Drivers/USB/Core/Events.c"/>

-			<build type="header-file" value="Drivers/USB/Core/Events.h"/>

-	        <build type="c-source"    value="Drivers/USB/Core/HostStandardReq.c"/>

-			<build type="header-file" value="Drivers/USB/Core/HostStandardReq.h"/>

-	        <build type="c-source"    value="Drivers/USB/Core/USBTask.c"/>

-			<build type="header-file" value="Drivers/USB/Core/USBTask.h"/>

-			<build type="header-file" value="Drivers/USB/Core/USBMode.h"/>

-			<build type="header-file" value="Drivers/USB/Core/StdDescriptors.h"/>

-			<build type="header-file" value="Drivers/USB/Core/StdRequestType.h"/>

-

-	        <build type="c-source"    value="Drivers/USB/Class/Common/HIDParser.c"/>

-	        <build type="header-file" value="Drivers/USB/Class/Common/HIDParser.h"/>

-	        <build type="header-file" value="Drivers/USB/Class/Common/HIDReportData.h"/>

-	    </module>

-

-		<select-by-device id="lufa.drivers.usb.core" caption="LUFA USB Core Driver">

-			<module type="driver" id="lufa.drivers.usb.core#avr8" caption="LUFA USB Core Driver - AVR8">

-				<device-support-alias value="lufa_avr8"/>

-

-				<info type="gui-flag" value="hidden"/>

-

-				<build type="doxygen-entry-point" value="Group_USBManagement_AVR8"/>

-

-				<require idref="lufa.drivers.usb.core.common"/>

-				<require idref="lufa.drivers.usb.core.avr8"/>

-			</module>

-

-			<module type="driver" id="lufa.drivers.usb.core#xmega" caption="LUFA USB Core Driver - XMEGA">

-				<device-support-alias value="lufa_xmega"/>

-

-				<info type="gui-flag" value="hidden"/>

-

-				<build type="doxygen-entry-point" value="Group_USBManagement_XMEGA"/>

-

-				<require idref="lufa.drivers.usb.core.common"/>

-				<require idref="lufa.drivers.usb.core.xmega"/>

-			</module>

-

-			<module type="driver" id="lufa.drivers.usb.core#uc3" caption="LUFA USB Core Driver - UC3">

-				<device-support-alias value="lufa_uc3"/>

-

-				<info type="gui-flag" value="hidden"/>

-

-				<build type="doxygen-entry-point" value="Group_USBManagement_UC3"/>

-

-				<require idref="lufa.drivers.usb.core.common"/>

-				<require idref="lufa.drivers.usb.core.uc3"/>

-			</module>

-		</select-by-device>

-	</asf>

-</lufa>

+<!--
+             LUFA Library
+     Copyright (C) Dean Camera, 2013.
+
+  dean [at] fourwalledcubicle [dot] com
+           www.lufa-lib.org
+-->
+
+<!-- Atmel Studio framework integration file -->
+
+<lufa>
+	<asf>
+		<module type="driver" id="lufa.drivers.usb.core.common" caption="LUFA USB Core Driver - Common">
+			<device-support-alias value="lufa_avr8"/>
+			<device-support-alias value="lufa_xmega"/>
+			<device-support-alias value="lufa_uc3"/>
+
+			<build type="doxygen-entry-point" value="Group_USBManagement"/>
+
+			<info type="gui-flag" value="hidden"/>
+
+			<build type="header-file" value="Drivers/USB/Core/Device.h"/>
+			<build type="header-file" value="Drivers/USB/Core/Endpoint.h"/>
+			<build type="header-file" value="Drivers/USB/Core/Host.h"/>
+			<build type="header-file" value="Drivers/USB/Core/Pipe.h"/>
+			<build type="header-file" value="Drivers/USB/Core/OTG.h"/>
+			<build type="header-file" value="Drivers/USB/Core/USBController.h"/>
+			<build type="header-file" value="Drivers/USB/Core/USBInterrupt.h"/>
+			<build type="header-file" value="Drivers/USB/Core/EndpointStream.h"/>
+			<build type="header-file" value="Drivers/USB/Core/PipeStream.h"/>
+	        <build type="c-source"    value="Drivers/USB/Core/ConfigDescriptors.c"/>
+			<build type="header-file" value="Drivers/USB/Core/ConfigDescriptors.h"/>
+	        <build type="c-source"    value="Drivers/USB/Core/DeviceStandardReq.c"/>
+			<build type="header-file" value="Drivers/USB/Core/DeviceStandardReq.h"/>
+	        <build type="c-source"    value="Drivers/USB/Core/Events.c"/>
+			<build type="header-file" value="Drivers/USB/Core/Events.h"/>
+	        <build type="c-source"    value="Drivers/USB/Core/HostStandardReq.c"/>
+			<build type="header-file" value="Drivers/USB/Core/HostStandardReq.h"/>
+	        <build type="c-source"    value="Drivers/USB/Core/USBTask.c"/>
+			<build type="header-file" value="Drivers/USB/Core/USBTask.h"/>
+			<build type="header-file" value="Drivers/USB/Core/USBMode.h"/>
+			<build type="header-file" value="Drivers/USB/Core/StdDescriptors.h"/>
+			<build type="header-file" value="Drivers/USB/Core/StdRequestType.h"/>
+
+	        <build type="c-source"    value="Drivers/USB/Class/Common/HIDParser.c"/>
+	        <build type="header-file" value="Drivers/USB/Class/Common/HIDParser.h"/>
+	        <build type="header-file" value="Drivers/USB/Class/Common/HIDReportData.h"/>
+	    </module>
+
+		<select-by-device id="lufa.drivers.usb.core" caption="LUFA USB Core Driver">
+			<module type="driver" id="lufa.drivers.usb.core#avr8" caption="LUFA USB Core Driver - AVR8">
+				<device-support-alias value="lufa_avr8"/>
+
+				<info type="gui-flag" value="hidden"/>
+
+				<build type="doxygen-entry-point" value="Group_USBManagement_AVR8"/>
+
+				<require idref="lufa.drivers.usb.core.common"/>
+				<require idref="lufa.drivers.usb.core.avr8"/>
+			</module>
+
+			<module type="driver" id="lufa.drivers.usb.core#xmega" caption="LUFA USB Core Driver - XMEGA">
+				<device-support-alias value="lufa_xmega"/>
+
+				<info type="gui-flag" value="hidden"/>
+
+				<build type="doxygen-entry-point" value="Group_USBManagement_XMEGA"/>
+
+				<require idref="lufa.drivers.usb.core.common"/>
+				<require idref="lufa.drivers.usb.core.xmega"/>
+			</module>
+
+			<module type="driver" id="lufa.drivers.usb.core#uc3" caption="LUFA USB Core Driver - UC3">
+				<device-support-alias value="lufa_uc3"/>
+
+				<info type="gui-flag" value="hidden"/>
+
+				<build type="doxygen-entry-point" value="Group_USBManagement_UC3"/>
+
+				<require idref="lufa.drivers.usb.core.common"/>
+				<require idref="lufa.drivers.usb.core.uc3"/>
+			</module>
+		</select-by-device>
+	</asf>
+</lufa>
diff --git a/tmk_core/protocol/lufa/LUFA-git/LUFA/StudioIntegration/lufa_drivers_usb_core_avr8.xml b/tmk_core/protocol/lufa/LUFA-git/LUFA/StudioIntegration/lufa_drivers_usb_core_avr8.xml
index 166b9257aa..4688f05f91 100644
--- a/tmk_core/protocol/lufa/LUFA-git/LUFA/StudioIntegration/lufa_drivers_usb_core_avr8.xml
+++ b/tmk_core/protocol/lufa/LUFA-git/LUFA/StudioIntegration/lufa_drivers_usb_core_avr8.xml
@@ -1,43 +1,43 @@
-<!--

-             LUFA Library

-     Copyright (C) Dean Camera, 2013.

-

-  dean [at] fourwalledcubicle [dot] com

-           www.lufa-lib.org

--->

-

-<!-- Atmel Studio framework integration file -->

-

-<lufa>

-	<asf>

-		<module type="driver" id="lufa.drivers.usb.core.avr8" caption="LUFA USB Core Driver for AVR8">

-			<device-support-alias value="lufa_avr8"/>

-

-			<info type="gui-flag" value="hidden"/>

-

-			<build type="doxygen-entry-point" value="Group_USBManagement_AVR8"/>

-

-			<build type="c-source"    value="Drivers/USB/Core/AVR8/Template/Template_Endpoint_Control_R.c"/>

-			<build type="c-source"    value="Drivers/USB/Core/AVR8/Template/Template_Endpoint_Control_W.c"/>

-			<build type="c-source"    value="Drivers/USB/Core/AVR8/Template/Template_Endpoint_RW.c"/>

-			<build type="c-source"    value="Drivers/USB/Core/AVR8/Template/Template_Pipe_RW.c"/>

-			<build type="c-source"    value="Drivers/USB/Core/AVR8/Device_AVR8.c"/>

-			<build type="header-file" value="Drivers/USB/Core/AVR8/Device_AVR8.h"/>

-			<build type="c-source"    value="Drivers/USB/Core/AVR8/Endpoint_AVR8.c"/>

-			<build type="header-file" value="Drivers/USB/Core/AVR8/Endpoint_AVR8.h"/>

-			<build type="c-source"    value="Drivers/USB/Core/AVR8/Host_AVR8.c"/>

-			<build type="header-file" value="Drivers/USB/Core/AVR8/Host_AVR8.h"/>

-			<build type="c-source"    value="Drivers/USB/Core/AVR8/Pipe_AVR8.c"/>

-			<build type="header-file" value="Drivers/USB/Core/AVR8/Pipe_AVR8.h"/>

-			<build type="header-file" value="Drivers/USB/Core/AVR8/OTG_AVR8.h"/>

-			<build type="c-source"    value="Drivers/USB/Core/AVR8/USBController_AVR8.c"/>

-			<build type="header-file" value="Drivers/USB/Core/AVR8/USBController_AVR8.h"/>

-			<build type="c-source"    value="Drivers/USB/Core/AVR8/USBInterrupt_AVR8.c"/>

-			<build type="header-file" value="Drivers/USB/Core/AVR8/USBInterrupt_AVR8.h"/>

-			<build type="c-source"    value="Drivers/USB/Core/AVR8/EndpointStream_AVR8.c"/>

-			<build type="header-file" value="Drivers/USB/Core/AVR8/EndpointStream_AVR8.h"/>

-			<build type="c-source"    value="Drivers/USB/Core/AVR8/PipeStream_AVR8.c"/>

-			<build type="header-file" value="Drivers/USB/Core/AVR8/PipeStream_AVR8.h"/>

-		</module>

-	</asf>

-</lufa>

+<!--
+             LUFA Library
+     Copyright (C) Dean Camera, 2013.
+
+  dean [at] fourwalledcubicle [dot] com
+           www.lufa-lib.org
+-->
+
+<!-- Atmel Studio framework integration file -->
+
+<lufa>
+	<asf>
+		<module type="driver" id="lufa.drivers.usb.core.avr8" caption="LUFA USB Core Driver for AVR8">
+			<device-support-alias value="lufa_avr8"/>
+
+			<info type="gui-flag" value="hidden"/>
+
+			<build type="doxygen-entry-point" value="Group_USBManagement_AVR8"/>
+
+			<build type="c-source"    value="Drivers/USB/Core/AVR8/Template/Template_Endpoint_Control_R.c"/>
+			<build type="c-source"    value="Drivers/USB/Core/AVR8/Template/Template_Endpoint_Control_W.c"/>
+			<build type="c-source"    value="Drivers/USB/Core/AVR8/Template/Template_Endpoint_RW.c"/>
+			<build type="c-source"    value="Drivers/USB/Core/AVR8/Template/Template_Pipe_RW.c"/>
+			<build type="c-source"    value="Drivers/USB/Core/AVR8/Device_AVR8.c"/>
+			<build type="header-file" value="Drivers/USB/Core/AVR8/Device_AVR8.h"/>
+			<build type="c-source"    value="Drivers/USB/Core/AVR8/Endpoint_AVR8.c"/>
+			<build type="header-file" value="Drivers/USB/Core/AVR8/Endpoint_AVR8.h"/>
+			<build type="c-source"    value="Drivers/USB/Core/AVR8/Host_AVR8.c"/>
+			<build type="header-file" value="Drivers/USB/Core/AVR8/Host_AVR8.h"/>
+			<build type="c-source"    value="Drivers/USB/Core/AVR8/Pipe_AVR8.c"/>
+			<build type="header-file" value="Drivers/USB/Core/AVR8/Pipe_AVR8.h"/>
+			<build type="header-file" value="Drivers/USB/Core/AVR8/OTG_AVR8.h"/>
+			<build type="c-source"    value="Drivers/USB/Core/AVR8/USBController_AVR8.c"/>
+			<build type="header-file" value="Drivers/USB/Core/AVR8/USBController_AVR8.h"/>
+			<build type="c-source"    value="Drivers/USB/Core/AVR8/USBInterrupt_AVR8.c"/>
+			<build type="header-file" value="Drivers/USB/Core/AVR8/USBInterrupt_AVR8.h"/>
+			<build type="c-source"    value="Drivers/USB/Core/AVR8/EndpointStream_AVR8.c"/>
+			<build type="header-file" value="Drivers/USB/Core/AVR8/EndpointStream_AVR8.h"/>
+			<build type="c-source"    value="Drivers/USB/Core/AVR8/PipeStream_AVR8.c"/>
+			<build type="header-file" value="Drivers/USB/Core/AVR8/PipeStream_AVR8.h"/>
+		</module>
+	</asf>
+</lufa>
diff --git a/tmk_core/protocol/lufa/LUFA-git/LUFA/StudioIntegration/lufa_drivers_usb_core_uc3.xml b/tmk_core/protocol/lufa/LUFA-git/LUFA/StudioIntegration/lufa_drivers_usb_core_uc3.xml
index 7e0540cda7..2e7185f24a 100644
--- a/tmk_core/protocol/lufa/LUFA-git/LUFA/StudioIntegration/lufa_drivers_usb_core_uc3.xml
+++ b/tmk_core/protocol/lufa/LUFA-git/LUFA/StudioIntegration/lufa_drivers_usb_core_uc3.xml
@@ -1,42 +1,42 @@
-<!--

-             LUFA Library

-     Copyright (C) Dean Camera, 2013.

-

-  dean [at] fourwalledcubicle [dot] com

-           www.lufa-lib.org

--->

-

-<!-- Atmel Studio framework integration file -->

-

-<lufa>

-	<asf>

-		<module type="driver" id="lufa.drivers.usb.core.uc3" caption="LUFA USB Core Driver for UC3">

-			<device-support-alias value="lufa_uc3"/>

-

-			<info type="gui-flag" value="hidden"/>

-

-			<build type="doxygen-entry-point" value="Group_USBManagement_UC3"/>

-

-			<build type="c-source"    value="Drivers/USB/Core/UC3/Template/Template_Endpoint_Control_R.c"/>

-			<build type="c-source"    value="Drivers/USB/Core/UC3/Template/Template_Endpoint_Control_W.c"/>

-			<build type="c-source"    value="Drivers/USB/Core/UC3/Template/Template_Endpoint_RW.c"/>

-			<build type="c-source"    value="Drivers/USB/Core/UC3/Template/Template_Pipe_RW.c"/>

-			<build type="c-source"    value="Drivers/USB/Core/UC3/Device_UC3.c"/>

-			<build type="header-file" value="Drivers/USB/Core/UC3/Device_UC3.h"/>

-			<build type="c-source"    value="Drivers/USB/Core/UC3/Endpoint_UC3.c"/>

-			<build type="header-file" value="Drivers/USB/Core/UC3/Endpoint_UC3.h"/>

-			<build type="c-source"    value="Drivers/USB/Core/UC3/Host_UC3.c"/>

-			<build type="header-file" value="Drivers/USB/Core/UC3/Host_UC3.h"/>

-			<build type="c-source"    value="Drivers/USB/Core/UC3/Pipe_UC3.c"/>

-			<build type="header-file" value="Drivers/USB/Core/UC3/Pipe_UC3.h"/>

-			<build type="c-source"    value="Drivers/USB/Core/UC3/USBController_UC3.c"/>

-			<build type="header-file" value="Drivers/USB/Core/UC3/USBController_UC3.h"/>

-			<build type="c-source"    value="Drivers/USB/Core/UC3/USBInterrupt_UC3.c"/>

-			<build type="header-file" value="Drivers/USB/Core/UC3/USBInterrupt_UC3.h"/>

-			<build type="c-source"    value="Drivers/USB/Core/UC3/EndpointStream_UC3.c"/>

-			<build type="header-file" value="Drivers/USB/Core/UC3/EndpointStream_UC3.h"/>

-			<build type="c-source"    value="Drivers/USB/Core/UC3/PipeStream_UC3.c"/>

-			<build type="header-file" value="Drivers/USB/Core/UC3/PipeStream_UC3.h"/>

-		</module>

-	</asf>

-</lufa>

+<!--
+             LUFA Library
+     Copyright (C) Dean Camera, 2013.
+
+  dean [at] fourwalledcubicle [dot] com
+           www.lufa-lib.org
+-->
+
+<!-- Atmel Studio framework integration file -->
+
+<lufa>
+	<asf>
+		<module type="driver" id="lufa.drivers.usb.core.uc3" caption="LUFA USB Core Driver for UC3">
+			<device-support-alias value="lufa_uc3"/>
+
+			<info type="gui-flag" value="hidden"/>
+
+			<build type="doxygen-entry-point" value="Group_USBManagement_UC3"/>
+
+			<build type="c-source"    value="Drivers/USB/Core/UC3/Template/Template_Endpoint_Control_R.c"/>
+			<build type="c-source"    value="Drivers/USB/Core/UC3/Template/Template_Endpoint_Control_W.c"/>
+			<build type="c-source"    value="Drivers/USB/Core/UC3/Template/Template_Endpoint_RW.c"/>
+			<build type="c-source"    value="Drivers/USB/Core/UC3/Template/Template_Pipe_RW.c"/>
+			<build type="c-source"    value="Drivers/USB/Core/UC3/Device_UC3.c"/>
+			<build type="header-file" value="Drivers/USB/Core/UC3/Device_UC3.h"/>
+			<build type="c-source"    value="Drivers/USB/Core/UC3/Endpoint_UC3.c"/>
+			<build type="header-file" value="Drivers/USB/Core/UC3/Endpoint_UC3.h"/>
+			<build type="c-source"    value="Drivers/USB/Core/UC3/Host_UC3.c"/>
+			<build type="header-file" value="Drivers/USB/Core/UC3/Host_UC3.h"/>
+			<build type="c-source"    value="Drivers/USB/Core/UC3/Pipe_UC3.c"/>
+			<build type="header-file" value="Drivers/USB/Core/UC3/Pipe_UC3.h"/>
+			<build type="c-source"    value="Drivers/USB/Core/UC3/USBController_UC3.c"/>
+			<build type="header-file" value="Drivers/USB/Core/UC3/USBController_UC3.h"/>
+			<build type="c-source"    value="Drivers/USB/Core/UC3/USBInterrupt_UC3.c"/>
+			<build type="header-file" value="Drivers/USB/Core/UC3/USBInterrupt_UC3.h"/>
+			<build type="c-source"    value="Drivers/USB/Core/UC3/EndpointStream_UC3.c"/>
+			<build type="header-file" value="Drivers/USB/Core/UC3/EndpointStream_UC3.h"/>
+			<build type="c-source"    value="Drivers/USB/Core/UC3/PipeStream_UC3.c"/>
+			<build type="header-file" value="Drivers/USB/Core/UC3/PipeStream_UC3.h"/>
+		</module>
+	</asf>
+</lufa>
diff --git a/tmk_core/protocol/lufa/LUFA-git/LUFA/StudioIntegration/lufa_drivers_usb_core_xmega.xml b/tmk_core/protocol/lufa/LUFA-git/LUFA/StudioIntegration/lufa_drivers_usb_core_xmega.xml
index 9e9f4f6a1d..c79a0f5b52 100644
--- a/tmk_core/protocol/lufa/LUFA-git/LUFA/StudioIntegration/lufa_drivers_usb_core_xmega.xml
+++ b/tmk_core/protocol/lufa/LUFA-git/LUFA/StudioIntegration/lufa_drivers_usb_core_xmega.xml
@@ -1,36 +1,36 @@
-<!--

-             LUFA Library

-     Copyright (C) Dean Camera, 2013.

-

-  dean [at] fourwalledcubicle [dot] com

-           www.lufa-lib.org

--->

-

-<!-- Atmel Studio framework integration file -->

-

-<lufa>

-	<asf>

-		<module type="driver" id="lufa.drivers.usb.core.xmega" caption="LUFA USB Core Driver for XMEGA">

-			<device-support-alias value="lufa_xmega"/>

-

-			<info type="gui-flag" value="hidden"/>

-

-			<build type="doxygen-entry-point" value="Group_USBManagement_XMEGA"/>

-

-			<build type="c-source"    value="Drivers/USB/Core/XMEGA/Template/Template_Endpoint_Control_R.c"/>

-			<build type="c-source"    value="Drivers/USB/Core/XMEGA/Template/Template_Endpoint_Control_W.c"/>

-			<build type="c-source"    value="Drivers/USB/Core/XMEGA/Template/Template_Endpoint_RW.c"/>

-			<build type="c-source"    value="Drivers/USB/Core/XMEGA/Device_XMEGA.c"/>

-			<build type="header-file" value="Drivers/USB/Core/XMEGA/Device_XMEGA.h"/>

-			<build type="c-source"    value="Drivers/USB/Core/XMEGA/Endpoint_XMEGA.c"/>

-			<build type="header-file" value="Drivers/USB/Core/XMEGA/Endpoint_XMEGA.h"/>

-			<build type="c-source"    value="Drivers/USB/Core/XMEGA/Pipe_XMEGA.c"/>

-			<build type="c-source"    value="Drivers/USB/Core/XMEGA/USBController_XMEGA.c"/>

-			<build type="header-file" value="Drivers/USB/Core/XMEGA/USBController_XMEGA.h"/>

-			<build type="c-source"    value="Drivers/USB/Core/XMEGA/USBInterrupt_XMEGA.c"/>

-			<build type="header-file" value="Drivers/USB/Core/XMEGA/USBInterrupt_XMEGA.h"/>

-			<build type="c-source"    value="Drivers/USB/Core/XMEGA/EndpointStream_XMEGA.c"/>

-			<build type="header-file" value="Drivers/USB/Core/XMEGA/EndpointStream_XMEGA.h"/>

-		</module>

-	</asf>

-</lufa>

+<!--
+             LUFA Library
+     Copyright (C) Dean Camera, 2013.
+
+  dean [at] fourwalledcubicle [dot] com
+           www.lufa-lib.org
+-->
+
+<!-- Atmel Studio framework integration file -->
+
+<lufa>
+	<asf>
+		<module type="driver" id="lufa.drivers.usb.core.xmega" caption="LUFA USB Core Driver for XMEGA">
+			<device-support-alias value="lufa_xmega"/>
+
+			<info type="gui-flag" value="hidden"/>
+
+			<build type="doxygen-entry-point" value="Group_USBManagement_XMEGA"/>
+
+			<build type="c-source"    value="Drivers/USB/Core/XMEGA/Template/Template_Endpoint_Control_R.c"/>
+			<build type="c-source"    value="Drivers/USB/Core/XMEGA/Template/Template_Endpoint_Control_W.c"/>
+			<build type="c-source"    value="Drivers/USB/Core/XMEGA/Template/Template_Endpoint_RW.c"/>
+			<build type="c-source"    value="Drivers/USB/Core/XMEGA/Device_XMEGA.c"/>
+			<build type="header-file" value="Drivers/USB/Core/XMEGA/Device_XMEGA.h"/>
+			<build type="c-source"    value="Drivers/USB/Core/XMEGA/Endpoint_XMEGA.c"/>
+			<build type="header-file" value="Drivers/USB/Core/XMEGA/Endpoint_XMEGA.h"/>
+			<build type="c-source"    value="Drivers/USB/Core/XMEGA/Pipe_XMEGA.c"/>
+			<build type="c-source"    value="Drivers/USB/Core/XMEGA/USBController_XMEGA.c"/>
+			<build type="header-file" value="Drivers/USB/Core/XMEGA/USBController_XMEGA.h"/>
+			<build type="c-source"    value="Drivers/USB/Core/XMEGA/USBInterrupt_XMEGA.c"/>
+			<build type="header-file" value="Drivers/USB/Core/XMEGA/USBInterrupt_XMEGA.h"/>
+			<build type="c-source"    value="Drivers/USB/Core/XMEGA/EndpointStream_XMEGA.c"/>
+			<build type="header-file" value="Drivers/USB/Core/XMEGA/EndpointStream_XMEGA.h"/>
+		</module>
+	</asf>
+</lufa>
diff --git a/tmk_core/protocol/lufa/LUFA-git/LUFA/StudioIntegration/lufa_platform.xml b/tmk_core/protocol/lufa/LUFA-git/LUFA/StudioIntegration/lufa_platform.xml
index 02c7463ee5..4ee51f6ee0 100644
--- a/tmk_core/protocol/lufa/LUFA-git/LUFA/StudioIntegration/lufa_platform.xml
+++ b/tmk_core/protocol/lufa/LUFA-git/LUFA/StudioIntegration/lufa_platform.xml
@@ -1,60 +1,60 @@
-<!--

-             LUFA Library

-     Copyright (C) Dean Camera, 2013.

-

-  dean [at] fourwalledcubicle [dot] com

-           www.lufa-lib.org

--->

-

-<!-- Atmel Studio framework integration file -->

-

-<lufa>

-	<asf>

-		<select-by-device id="lufa.platform" caption="LUFA Platform Specific Support">

-			<module type="service" id="lufa.platform#avr8" caption="LUFA Platform Specific Support - AVR8">

-				<device-support-alias value="lufa_avr8"/>

-

-				<build type="define" name="ARCH" value="ARCH_AVR8"/>

-

-				<build type="doxygen-entry-point" value="Group_PlatformDrivers"/>

-

-				<build type="include-path" value=".."/>

-				<build type="header-file" subtype="api" value="Platform/Platform.h"/>

-

-				<require idref="lufa.common"/>

-			</module>

-

-			<module type="service" id="lufa.platform#xmega" caption="LUFA Platform Specific Support - XMEGA">

-				<device-support-alias value="lufa_xmega"/>

-

-				<build type="define" name="ARCH" value="ARCH_XMEGA"/>

-

-				<build type="doxygen-entry-point" value="Group_PlatformDrivers"/>

-

-				<build type="include-path" value=".."/>

-				<build type="header-file" subtype="api" value="Platform/Platform.h"/>

-

-				<build type="distribute" value="Platform/XMEGA/XMEGAExperimentalInfo.txt" subtype="license"/>

-

-				<require idref="lufa.platform.xmega"/>

-				<require idref="lufa.common"/>

-			</module>

-

-			<module type="service" id="lufa.platform#uc3" caption="LUFA Platform Specific Support - UC3">

-				<device-support-alias value="lufa_uc3"/>

-

-				<build type="define" name="ARCH" value="ARCH_UC3"/>

-

-				<build type="doxygen-entry-point" value="Group_PlatformDrivers"/>

-

-				<build type="include-path" value=".."/>

-				<build type="header-file" subtype="api" value="Platform/Platform.h"/>

-

-				<build type="distribute" value="Platform/UC3/UC3ExperimentalInfo.txt" subtype="license"/>

-

-				<require idref="lufa.platform.uc3"/>

-				<require idref="lufa.common"/>

-			</module>

-		</select-by-device>

-	</asf>

-</lufa>

+<!--
+             LUFA Library
+     Copyright (C) Dean Camera, 2013.
+
+  dean [at] fourwalledcubicle [dot] com
+           www.lufa-lib.org
+-->
+
+<!-- Atmel Studio framework integration file -->
+
+<lufa>
+	<asf>
+		<select-by-device id="lufa.platform" caption="LUFA Platform Specific Support">
+			<module type="service" id="lufa.platform#avr8" caption="LUFA Platform Specific Support - AVR8">
+				<device-support-alias value="lufa_avr8"/>
+
+				<build type="define" name="ARCH" value="ARCH_AVR8"/>
+
+				<build type="doxygen-entry-point" value="Group_PlatformDrivers"/>
+
+				<build type="include-path" value=".."/>
+				<build type="header-file" subtype="api" value="Platform/Platform.h"/>
+
+				<require idref="lufa.common"/>
+			</module>
+
+			<module type="service" id="lufa.platform#xmega" caption="LUFA Platform Specific Support - XMEGA">
+				<device-support-alias value="lufa_xmega"/>
+
+				<build type="define" name="ARCH" value="ARCH_XMEGA"/>
+
+				<build type="doxygen-entry-point" value="Group_PlatformDrivers"/>
+
+				<build type="include-path" value=".."/>
+				<build type="header-file" subtype="api" value="Platform/Platform.h"/>
+
+				<build type="distribute" value="Platform/XMEGA/XMEGAExperimentalInfo.txt" subtype="license"/>
+
+				<require idref="lufa.platform.xmega"/>
+				<require idref="lufa.common"/>
+			</module>
+
+			<module type="service" id="lufa.platform#uc3" caption="LUFA Platform Specific Support - UC3">
+				<device-support-alias value="lufa_uc3"/>
+
+				<build type="define" name="ARCH" value="ARCH_UC3"/>
+
+				<build type="doxygen-entry-point" value="Group_PlatformDrivers"/>
+
+				<build type="include-path" value=".."/>
+				<build type="header-file" subtype="api" value="Platform/Platform.h"/>
+
+				<build type="distribute" value="Platform/UC3/UC3ExperimentalInfo.txt" subtype="license"/>
+
+				<require idref="lufa.platform.uc3"/>
+				<require idref="lufa.common"/>
+			</module>
+		</select-by-device>
+	</asf>
+</lufa>
diff --git a/tmk_core/protocol/lufa/LUFA-git/LUFA/StudioIntegration/lufa_platform_uc3.xml b/tmk_core/protocol/lufa/LUFA-git/LUFA/StudioIntegration/lufa_platform_uc3.xml
index a488c4b83d..98017b08ad 100644
--- a/tmk_core/protocol/lufa/LUFA-git/LUFA/StudioIntegration/lufa_platform_uc3.xml
+++ b/tmk_core/protocol/lufa/LUFA-git/LUFA/StudioIntegration/lufa_platform_uc3.xml
@@ -1,26 +1,26 @@
-<!--

-             LUFA Library

-     Copyright (C) Dean Camera, 2013.

-

-  dean [at] fourwalledcubicle [dot] com

-           www.lufa-lib.org

--->

-

-<!-- Atmel Studio framework integration file -->

-

-<lufa>

-	<asf>

-		<module type="driver" id="lufa.platform.uc3" caption="LUFA UC3 Platform Drivers">

-			<device-support-alias value="lufa_uc3"/>

-

-			<info type="gui-flag" value="hidden"/>

-

-			<build type="doxygen-entry-point" value="Group_PlatformDrivers_UC3"/>

-

-			<build type="header-file" value="Platform/UC3/ClockManagement.h"/>

-			<build type="header-file" value="Platform/UC3/InterruptManagement.h"/>

-			<build type="c-source" value="Platform/UC3/InterruptManagement.c"/>

-			<build type="asm-source" value="Platform/UC3/Exception.S"/>

-		</module>

-	</asf>

-</lufa>

+<!--
+             LUFA Library
+     Copyright (C) Dean Camera, 2013.
+
+  dean [at] fourwalledcubicle [dot] com
+           www.lufa-lib.org
+-->
+
+<!-- Atmel Studio framework integration file -->
+
+<lufa>
+	<asf>
+		<module type="driver" id="lufa.platform.uc3" caption="LUFA UC3 Platform Drivers">
+			<device-support-alias value="lufa_uc3"/>
+
+			<info type="gui-flag" value="hidden"/>
+
+			<build type="doxygen-entry-point" value="Group_PlatformDrivers_UC3"/>
+
+			<build type="header-file" value="Platform/UC3/ClockManagement.h"/>
+			<build type="header-file" value="Platform/UC3/InterruptManagement.h"/>
+			<build type="c-source" value="Platform/UC3/InterruptManagement.c"/>
+			<build type="asm-source" value="Platform/UC3/Exception.S"/>
+		</module>
+	</asf>
+</lufa>
diff --git a/tmk_core/protocol/lufa/LUFA-git/LUFA/StudioIntegration/lufa_platform_xmega.xml b/tmk_core/protocol/lufa/LUFA-git/LUFA/StudioIntegration/lufa_platform_xmega.xml
index 1674a77b02..e613fe5206 100644
--- a/tmk_core/protocol/lufa/LUFA-git/LUFA/StudioIntegration/lufa_platform_xmega.xml
+++ b/tmk_core/protocol/lufa/LUFA-git/LUFA/StudioIntegration/lufa_platform_xmega.xml
@@ -1,23 +1,23 @@
-<!--

-             LUFA Library

-     Copyright (C) Dean Camera, 2013.

-

-  dean [at] fourwalledcubicle [dot] com

-           www.lufa-lib.org

--->

-

-<!-- Atmel Studio framework integration file -->

-

-<lufa>

-	<asf xmlversion="1.0">

-		<module type="driver" id="lufa.platform.xmega" caption="LUFA XMEGA Platform Drivers">

-			<device-support-alias value="lufa_xmega"/>

-

-			<info type="gui-flag" value="hidden"/>

-

-			<build type="doxygen-entry-point" value="Group_PlatformDrivers_XMEGA"/>

-

-			<build type="header-file" value="Platform/XMEGA/ClockManagement.h"/>

-		</module>

-	</asf>

-</lufa>

+<!--
+             LUFA Library
+     Copyright (C) Dean Camera, 2013.
+
+  dean [at] fourwalledcubicle [dot] com
+           www.lufa-lib.org
+-->
+
+<!-- Atmel Studio framework integration file -->
+
+<lufa>
+	<asf xmlversion="1.0">
+		<module type="driver" id="lufa.platform.xmega" caption="LUFA XMEGA Platform Drivers">
+			<device-support-alias value="lufa_xmega"/>
+
+			<info type="gui-flag" value="hidden"/>
+
+			<build type="doxygen-entry-point" value="Group_PlatformDrivers_XMEGA"/>
+
+			<build type="header-file" value="Platform/XMEGA/ClockManagement.h"/>
+		</module>
+	</asf>
+</lufa>
diff --git a/tmk_core/protocol/lufa/LUFA-git/LUFA/StudioIntegration/lufa_toolchain.xml b/tmk_core/protocol/lufa/LUFA-git/LUFA/StudioIntegration/lufa_toolchain.xml
index 031c8a2be6..a76b6d0d3b 100644
--- a/tmk_core/protocol/lufa/LUFA-git/LUFA/StudioIntegration/lufa_toolchain.xml
+++ b/tmk_core/protocol/lufa/LUFA-git/LUFA/StudioIntegration/lufa_toolchain.xml
@@ -1,43 +1,43 @@
-<!--

-             LUFA Library

-     Copyright (C) Dean Camera, 2013.

-

-  dean [at] fourwalledcubicle [dot] com

-           www.lufa-lib.org

--->

-

-<!-- Atmel Studio framework integration file -->

-

-<lufa>

-	<asf>

-		<select-by-device id="common.utils.toolchain_config" caption="Toolchain configuration defaults">

-			<module type="build-specific" id="common.utils.toolchain_config#avr" caption="Toolchain configuration defaults for 8-bit AVR">

-				<info type="gui-flag" value="hidden"/>

-				<device-support value="avr"/>

-

-				<toolchain-config name="avrgcc.compiler.general.ChangeDefaultBitFieldUnsigned" value="True" toolchain="avrgcc"/>

-				<toolchain-config name="avrgcc.compiler.general.ChangeDefaultCharTypeUnsigned" value="True" toolchain="avrgcc"/>

-				<toolchain-config name="avrgcc.compiler.optimization.OtherFlags" value="-fdata-sections" toolchain="avrgcc"/>

-				<toolchain-config name="avrgcc.compiler.optimization.PrepareFunctionsForGarbageCollection" value="True" toolchain="avrgcc"/>

-				<toolchain-config name="avrgcc.compiler.warnings.AllWarnings" value="True" toolchain="avrgcc"/>

-				<toolchain-config name="avrgcc.compiler.miscellaneous.OtherFlags" value="-mrelax -std=gnu99 -fno-strict-aliasing -fno-jump-tables" toolchain="avrgcc"/>

-				<toolchain-config name="avrgcc.linker.optimization.GarbageCollectUnusedSections" value="True" toolchain="avrgcc"/>

-				<toolchain-config name="avrgcc.linker.optimization.RelaxBranches" value="True" toolchain="avrgcc"/>

-			</module>

-		</select-by-device>

-

-		<module type="build-specific" id="common.utils.toolchain_config#uc3" caption="Toolchain configuration defaults for 32-bit AVR">

-			<info type="gui-flag" value="hidden"/>

-			<device-support value="uc3"/>

-

-			<toolchain-config name="avrgcc.compiler.general.ChangeDefaultBitFieldUnsigned" value="True" toolchain="avr32gcc"/>

-			<toolchain-config name="avrgcc.compiler.general.ChangeDefaultCharTypeUnsigned" value="True" toolchain="avr32gcc"/>

-			<toolchain-config name="avr32gcc.compiler.optimization.OtherFlags" value="-fdata-sections" toolchain="avr32gcc"/>

-			<toolchain-config name="avr32gcc.compiler.optimization.PrepareFunctionsForGarbageCollection" value="True" toolchain="avr32gcc"/>

-			<toolchain-config name="avr32gcc.compiler.warnings.AllWarnings" value="True" toolchain="avr32gcc"/>

-			<toolchain-config name="avr32gcc.compiler.miscellaneous.OtherFlags" value="-mrelax -std=gnu99 -fno-strict-aliasing -mno-cond-exec-before-reload" toolchain="avr32gcc"/>

-			<toolchain-config name="avr32gcc.linker.optimization.GarbageCollectUnusedSections" value="True" toolchain="avr32gcc"/>

-			<toolchain-config name="avr32gcc.linker.optimization.RelaxBranches" value="True" toolchain="avr32gcc"/>

-		</module>

-	</asf>

-</lufa>

+<!--
+             LUFA Library
+     Copyright (C) Dean Camera, 2013.
+
+  dean [at] fourwalledcubicle [dot] com
+           www.lufa-lib.org
+-->
+
+<!-- Atmel Studio framework integration file -->
+
+<lufa>
+	<asf>
+		<select-by-device id="common.utils.toolchain_config" caption="Toolchain configuration defaults">
+			<module type="build-specific" id="common.utils.toolchain_config#avr" caption="Toolchain configuration defaults for 8-bit AVR">
+				<info type="gui-flag" value="hidden"/>
+				<device-support value="avr"/>
+
+				<toolchain-config name="avrgcc.compiler.general.ChangeDefaultBitFieldUnsigned" value="True" toolchain="avrgcc"/>
+				<toolchain-config name="avrgcc.compiler.general.ChangeDefaultCharTypeUnsigned" value="True" toolchain="avrgcc"/>
+				<toolchain-config name="avrgcc.compiler.optimization.OtherFlags" value="-fdata-sections" toolchain="avrgcc"/>
+				<toolchain-config name="avrgcc.compiler.optimization.PrepareFunctionsForGarbageCollection" value="True" toolchain="avrgcc"/>
+				<toolchain-config name="avrgcc.compiler.warnings.AllWarnings" value="True" toolchain="avrgcc"/>
+				<toolchain-config name="avrgcc.compiler.miscellaneous.OtherFlags" value="-mrelax -std=gnu99 -fno-strict-aliasing -fno-jump-tables" toolchain="avrgcc"/>
+				<toolchain-config name="avrgcc.linker.optimization.GarbageCollectUnusedSections" value="True" toolchain="avrgcc"/>
+				<toolchain-config name="avrgcc.linker.optimization.RelaxBranches" value="True" toolchain="avrgcc"/>
+			</module>
+		</select-by-device>
+
+		<module type="build-specific" id="common.utils.toolchain_config#uc3" caption="Toolchain configuration defaults for 32-bit AVR">
+			<info type="gui-flag" value="hidden"/>
+			<device-support value="uc3"/>
+
+			<toolchain-config name="avrgcc.compiler.general.ChangeDefaultBitFieldUnsigned" value="True" toolchain="avr32gcc"/>
+			<toolchain-config name="avrgcc.compiler.general.ChangeDefaultCharTypeUnsigned" value="True" toolchain="avr32gcc"/>
+			<toolchain-config name="avr32gcc.compiler.optimization.OtherFlags" value="-fdata-sections" toolchain="avr32gcc"/>
+			<toolchain-config name="avr32gcc.compiler.optimization.PrepareFunctionsForGarbageCollection" value="True" toolchain="avr32gcc"/>
+			<toolchain-config name="avr32gcc.compiler.warnings.AllWarnings" value="True" toolchain="avr32gcc"/>
+			<toolchain-config name="avr32gcc.compiler.miscellaneous.OtherFlags" value="-mrelax -std=gnu99 -fno-strict-aliasing -mno-cond-exec-before-reload" toolchain="avr32gcc"/>
+			<toolchain-config name="avr32gcc.linker.optimization.GarbageCollectUnusedSections" value="True" toolchain="avr32gcc"/>
+			<toolchain-config name="avr32gcc.linker.optimization.RelaxBranches" value="True" toolchain="avr32gcc"/>
+		</module>
+	</asf>
+</lufa>
diff --git a/tmk_core/protocol/lufa/LUFA-git/LUFA/StudioIntegration/makefile b/tmk_core/protocol/lufa/LUFA-git/LUFA/StudioIntegration/makefile
index 2649598d9f..9d6329b5fe 100644
--- a/tmk_core/protocol/lufa/LUFA-git/LUFA/StudioIntegration/makefile
+++ b/tmk_core/protocol/lufa/LUFA-git/LUFA/StudioIntegration/makefile
@@ -109,7 +109,7 @@ generate_vsix: $(EXTENSION_OUTPUT_XML) $(MODULE_OUTPUT_XML) $(MSHELP_OUTPUT_XML)
 
 	@echo Archiving XDK content...
 	@rm -f contents.zip
-	@cd $(LUFA_ROOT)/../ && zip contents.zip -q -0 -r --exclude=*Documentation* --exclude=*StudioIntegration* LUFA Bootloaders Demos Projects README.txt
+	@cd $(LUFA_ROOT)/../ && zip contents.zip -q -0 -r --exclude=*Documentation* --exclude=*StudioIntegration* LUFA Bootloaders Demos Projects readme.txt
 
 	@echo Creating VSIX dependencies...
 	@cp $(VSIX_ASSETS) $(LUFA_ROOT)/..