Merge remote-tracking branch 'upstream/master'

* upstream/master: (1239 commits)
  Update ez.c
  removes planck/rev3 temporarily
  Move hand_swap_config to ez.c, removes error for infinity
  Update Makefile
  ergodox: Update algernon's keymap to v1.9
  Added VS Code dir to .gitignore
  Support the Pegasus Hoof controller.
  [Jack & Erez] Simplifies and documents TO
  add readme
  use wait_ms instead of _delay_ms
  add messenger
  init keymap
  Add example keymap
  Adding whiskey_tango_foxtrot_capslock ergodox keymap
  Unicode map framework. Allow unicode up to 0xFFFFF using separate mapping table
  CIE 1931 dim curve
  Apply the dim curve to the RGB output
  Update the Cluecard readme files
  Tune snake and knight intervals for Cluecard
  Tunable RGB light intervals
  ...

7 files changed, 1304 insertions, 0 deletions

diff --git a/tmk_core/common/chibios/bootloader.c b/tmk_core/common/chibios/bootloader.c
new file mode 100644
index 0000000000..8a533ab6f6
--- /dev/null
+++ b/tmk_core/common/chibios/bootloader.c
@@ -0,0 +1,47 @@
+#include "bootloader.h"
+
+#include "ch.h"
+#include "hal.h"
+
+#ifdef STM32_BOOTLOADER_ADDRESS
+/* STM32 */
+
+#if defined(STM32F0XX)
+/* This code should be checked whether it runs correctly on platforms */
+#define SYMVAL(sym) (uint32_t)(((uint8_t *)&(sym)) - ((uint8_t *)0))
+extern uint32_t __ram0_end__;
+
+void bootloader_jump(void) {
+  *((unsigned long *)(SYMVAL(__ram0_end__) - 4)) = 0xDEADBEEF; // set magic flag => reset handler will jump into boot loader
+   NVIC_SystemReset();
+}
+
+#else /* defined(STM32F0XX) */
+#error Check that the bootloader code works on your platform and add it to bootloader.c!
+#endif /* defined(STM32F0XX) */
+
+#elif defined(KL2x) || defined(K20x) /* STM32_BOOTLOADER_ADDRESS */
+/* Kinetis */
+
+#if defined(KIIBOHD_BOOTLOADER)
+/* Kiibohd Bootloader (MCHCK and Infinity KB) */
+#define SCB_AIRCR_VECTKEY_WRITEMAGIC 0x05FA0000
+const uint8_t sys_reset_to_loader_magic[] = "\xff\x00\x7fRESET TO LOADER\x7f\x00\xff";
+void bootloader_jump(void) {
+  __builtin_memcpy((void *)VBAT, (const void *)sys_reset_to_loader_magic, sizeof(sys_reset_to_loader_magic));
+  // request reset
+  SCB->AIRCR = SCB_AIRCR_VECTKEY_WRITEMAGIC | SCB_AIRCR_SYSRESETREQ_Msk;
+}
+
+#else /* defined(KIIBOHD_BOOTLOADER) */
+/* Default for Kinetis - expecting an ARM Teensy */
+void bootloader_jump(void) {
+	chThdSleepMilliseconds(100);
+	__BKPT(0);
+}
+#endif /* defined(KIIBOHD_BOOTLOADER) */
+
+#else /* neither STM32 nor KINETIS */
+__attribute__((weak))
+void bootloader_jump(void) {}
+#endif
\ No newline at end of file
diff --git a/tmk_core/common/chibios/eeprom.c b/tmk_core/common/chibios/eeprom.c
new file mode 100644
index 0000000000..5ff8ee86f4
--- /dev/null
+++ b/tmk_core/common/chibios/eeprom.c
@@ -0,0 +1,588 @@
+#include "ch.h"
+#include "hal.h"
+
+#include "eeconfig.h"
+
+/*************************************/
+/*          Hardware backend         */
+/*                                   */
+/*    Code from PJRC/Teensyduino     */
+/*************************************/
+
+/* Teensyduino Core Library
+ * http://www.pjrc.com/teensy/
+ * Copyright (c) 2013 PJRC.COM, LLC.
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining
+ * a copy of this software and associated documentation files (the
+ * "Software"), to deal in the Software without restriction, including
+ * without limitation the rights to use, copy, modify, merge, publish,
+ * distribute, sublicense, and/or sell copies of the Software, and to
+ * permit persons to whom the Software is furnished to do so, subject to
+ * the following conditions:
+ *
+ * 1. The above copyright notice and this permission notice shall be 
+ * included in all copies or substantial portions of the Software.
+ *
+ * 2. If the Software is incorporated into a build system that allows 
+ * selection among a list of target devices, then similar target
+ * devices manufactured by PJRC.COM must be included in the list of
+ * target devices and selectable in the same manner.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
+ * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
+ * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
+ * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
+ * SOFTWARE.
+ */
+
+
+#if defined(K20x) /* chip selection */
+/* Teensy 3.0, 3.1, 3.2; mchck; infinity keyboard */
+
+// The EEPROM is really RAM with a hardware-based backup system to
+// flash memory.  Selecting a smaller size EEPROM allows more wear
+// leveling, for higher write endurance.  If you edit this file,
+// set this to the smallest size your application can use.  Also,
+// due to Freescale's implementation, writing 16 or 32 bit words
+// (aligned to 2 or 4 byte boundaries) has twice the endurance
+// compared to writing 8 bit bytes.
+//
+#define EEPROM_SIZE 32
+
+// Writing unaligned 16 or 32 bit data is handled automatically when
+// this is defined, but at a cost of extra code size.  Without this,
+// any unaligned write will cause a hard fault exception!  If you're
+// absolutely sure all 16 and 32 bit writes will be aligned, you can
+// remove the extra unnecessary code.
+//
+#define HANDLE_UNALIGNED_WRITES
+
+// Minimum EEPROM Endurance
+// ------------------------
+#if (EEPROM_SIZE == 2048)	// 35000 writes/byte or 70000 writes/word
+  #define EEESIZE 0x33
+#elif (EEPROM_SIZE == 1024)	// 75000 writes/byte or 150000 writes/word
+  #define EEESIZE 0x34
+#elif (EEPROM_SIZE == 512)	// 155000 writes/byte or 310000 writes/word
+  #define EEESIZE 0x35
+#elif (EEPROM_SIZE == 256)	// 315000 writes/byte or 630000 writes/word
+  #define EEESIZE 0x36
+#elif (EEPROM_SIZE == 128)	// 635000 writes/byte or 1270000 writes/word
+  #define EEESIZE 0x37
+#elif (EEPROM_SIZE == 64)	// 1275000 writes/byte or 2550000 writes/word
+  #define EEESIZE 0x38
+#elif (EEPROM_SIZE == 32)	// 2555000 writes/byte or 5110000 writes/word
+  #define EEESIZE 0x39
+#endif
+
+void eeprom_initialize(void)
+{
+	uint32_t count=0;
+	uint16_t do_flash_cmd[] = {
+		0xf06f, 0x037f, 0x7003, 0x7803,
+		0xf013, 0x0f80, 0xd0fb, 0x4770};
+	uint8_t status;
+
+	if (FTFL->FCNFG & FTFL_FCNFG_RAMRDY) {
+		// FlexRAM is configured as traditional RAM
+		// We need to reconfigure for EEPROM usage
+		FTFL->FCCOB0 = 0x80; // PGMPART = Program Partition Command
+		FTFL->FCCOB4 = EEESIZE; // EEPROM Size
+		FTFL->FCCOB5 = 0x03; // 0K for Dataflash, 32K for EEPROM backup
+		__disable_irq();
+		// do_flash_cmd() must execute from RAM.  Luckily the C syntax is simple...
+		(*((void (*)(volatile uint8_t *))((uint32_t)do_flash_cmd | 1)))(&(FTFL->FSTAT));
+		__enable_irq();
+		status = FTFL->FSTAT;
+		if (status & (FTFL_FSTAT_RDCOLERR|FTFL_FSTAT_ACCERR|FTFL_FSTAT_FPVIOL)) {
+			FTFL->FSTAT = (status & (FTFL_FSTAT_RDCOLERR|FTFL_FSTAT_ACCERR|FTFL_FSTAT_FPVIOL));
+			return; // error
+		}
+	}
+	// wait for eeprom to become ready (is this really necessary?)
+	while (!(FTFL->FCNFG & FTFL_FCNFG_EEERDY)) {
+		if (++count > 20000) break;
+	}
+}
+
+#define FlexRAM ((uint8_t *)0x14000000)
+
+uint8_t eeprom_read_byte(const uint8_t *addr)
+{
+	uint32_t offset = (uint32_t)addr;
+	if (offset >= EEPROM_SIZE) return 0;
+	if (!(FTFL->FCNFG & FTFL_FCNFG_EEERDY)) eeprom_initialize();
+	return FlexRAM[offset];
+}
+
+uint16_t eeprom_read_word(const uint16_t *addr)
+{
+	uint32_t offset = (uint32_t)addr;
+	if (offset >= EEPROM_SIZE-1) return 0;
+	if (!(FTFL->FCNFG & FTFL_FCNFG_EEERDY)) eeprom_initialize();
+	return *(uint16_t *)(&FlexRAM[offset]);
+}
+
+uint32_t eeprom_read_dword(const uint32_t *addr)
+{
+	uint32_t offset = (uint32_t)addr;
+	if (offset >= EEPROM_SIZE-3) return 0;
+	if (!(FTFL->FCNFG & FTFL_FCNFG_EEERDY)) eeprom_initialize();
+	return *(uint32_t *)(&FlexRAM[offset]);
+}
+
+void eeprom_read_block(void *buf, const void *addr, uint32_t len)
+{
+	uint32_t offset = (uint32_t)addr;
+	uint8_t *dest = (uint8_t *)buf;
+	uint32_t end = offset + len;
+	
+	if (!(FTFL->FCNFG & FTFL_FCNFG_EEERDY)) eeprom_initialize();
+	if (end > EEPROM_SIZE) end = EEPROM_SIZE;
+	while (offset < end) {
+		*dest++ = FlexRAM[offset++];
+	}
+}
+
+int eeprom_is_ready(void)
+{
+	return (FTFL->FCNFG & FTFL_FCNFG_EEERDY) ? 1 : 0;
+}
+
+static void flexram_wait(void)
+{
+	while (!(FTFL->FCNFG & FTFL_FCNFG_EEERDY)) {
+		// TODO: timeout
+	}
+}
+
+void eeprom_write_byte(uint8_t *addr, uint8_t value)
+{
+	uint32_t offset = (uint32_t)addr;
+
+	if (offset >= EEPROM_SIZE) return;
+	if (!(FTFL->FCNFG & FTFL_FCNFG_EEERDY)) eeprom_initialize();
+	if (FlexRAM[offset] != value) {
+		FlexRAM[offset] = value;
+		flexram_wait();
+	}
+}
+
+void eeprom_write_word(uint16_t *addr, uint16_t value)
+{
+	uint32_t offset = (uint32_t)addr;
+
+	if (offset >= EEPROM_SIZE-1) return;
+	if (!(FTFL->FCNFG & FTFL_FCNFG_EEERDY)) eeprom_initialize();
+#ifdef HANDLE_UNALIGNED_WRITES
+	if ((offset & 1) == 0) {
+#endif
+		if (*(uint16_t *)(&FlexRAM[offset]) != value) {
+			*(uint16_t *)(&FlexRAM[offset]) = value;
+			flexram_wait();
+		}
+#ifdef HANDLE_UNALIGNED_WRITES
+	} else {
+		if (FlexRAM[offset] != value) {
+			FlexRAM[offset] = value;
+			flexram_wait();
+		}
+		if (FlexRAM[offset + 1] != (value >> 8)) {
+			FlexRAM[offset + 1] = value >> 8;
+			flexram_wait();
+		}
+	}
+#endif
+}
+
+void eeprom_write_dword(uint32_t *addr, uint32_t value)
+{
+	uint32_t offset = (uint32_t)addr;
+
+	if (offset >= EEPROM_SIZE-3) return;
+	if (!(FTFL->FCNFG & FTFL_FCNFG_EEERDY)) eeprom_initialize();
+#ifdef HANDLE_UNALIGNED_WRITES
+	switch (offset & 3) {
+	case 0:
+#endif
+		if (*(uint32_t *)(&FlexRAM[offset]) != value) {
+			*(uint32_t *)(&FlexRAM[offset]) = value;
+			flexram_wait();
+		}
+		return;
+#ifdef HANDLE_UNALIGNED_WRITES
+	case 2:
+		if (*(uint16_t *)(&FlexRAM[offset]) != value) {
+			*(uint16_t *)(&FlexRAM[offset]) = value;
+			flexram_wait();
+		}
+		if (*(uint16_t *)(&FlexRAM[offset + 2]) != (value >> 16)) {
+			*(uint16_t *)(&FlexRAM[offset + 2]) = value >> 16;
+			flexram_wait();
+		}
+		return;
+	default:
+		if (FlexRAM[offset] != value) {
+			FlexRAM[offset] = value;
+			flexram_wait();
+		}
+		if (*(uint16_t *)(&FlexRAM[offset + 1]) != (value >> 8)) {
+			*(uint16_t *)(&FlexRAM[offset + 1]) = value >> 8;
+			flexram_wait();
+		}
+		if (FlexRAM[offset + 3] != (value >> 24)) {
+			FlexRAM[offset + 3] = value >> 24;
+			flexram_wait();
+		}
+	}
+#endif
+}
+
+void eeprom_write_block(const void *buf, void *addr, uint32_t len)
+{
+	uint32_t offset = (uint32_t)addr;
+	const uint8_t *src = (const uint8_t *)buf;
+
+	if (offset >= EEPROM_SIZE) return;
+	if (!(FTFL->FCNFG & FTFL_FCNFG_EEERDY)) eeprom_initialize();
+	if (len >= EEPROM_SIZE) len = EEPROM_SIZE;
+	if (offset + len >= EEPROM_SIZE) len = EEPROM_SIZE - offset;
+	while (len > 0) {
+		uint32_t lsb = offset & 3;
+		if (lsb == 0 && len >= 4) {
+			// write aligned 32 bits
+			uint32_t val32;
+			val32 = *src++;
+			val32 |= (*src++ << 8);
+			val32 |= (*src++ << 16);
+			val32 |= (*src++ << 24);
+			if (*(uint32_t *)(&FlexRAM[offset]) != val32) {
+				*(uint32_t *)(&FlexRAM[offset]) = val32;
+				flexram_wait();
+			}
+			offset += 4;
+			len -= 4;
+		} else if ((lsb == 0 || lsb == 2) && len >= 2) {
+			// write aligned 16 bits
+			uint16_t val16;
+			val16 = *src++;
+			val16 |= (*src++ << 8);
+			if (*(uint16_t *)(&FlexRAM[offset]) != val16) {
+				*(uint16_t *)(&FlexRAM[offset]) = val16;
+				flexram_wait();
+			}
+			offset += 2;
+			len -= 2;
+		} else {
+			// write 8 bits
+			uint8_t val8 = *src++;
+			if (FlexRAM[offset] != val8) {
+				FlexRAM[offset] = val8;
+				flexram_wait();
+			}
+			offset++;
+			len--;
+		}
+	}
+}
+
+/*
+void do_flash_cmd(volatile uint8_t *fstat)
+{
+	*fstat = 0x80;
+	while ((*fstat & 0x80) == 0) ; // wait
+}
+00000000 <do_flash_cmd>:
+   0:	f06f 037f 	mvn.w	r3, #127	; 0x7f
+   4:	7003      	strb	r3, [r0, #0]
+   6:	7803      	ldrb	r3, [r0, #0]
+   8:	f013 0f80 	tst.w	r3, #128	; 0x80
+   c:	d0fb      	beq.n	6 <do_flash_cmd+0x6>
+   e:	4770      	bx	lr
+*/
+
+#elif defined(KL2x) /* chip selection */
+/* Teensy LC (emulated) */
+
+#define SYMVAL(sym) (uint32_t)(((uint8_t *)&(sym)) - ((uint8_t *)0))
+
+extern uint32_t __eeprom_workarea_start__;
+extern uint32_t __eeprom_workarea_end__;
+
+#define EEPROM_SIZE 128
+
+static uint32_t flashend = 0;
+
+void eeprom_initialize(void)
+{
+	const uint16_t *p = (uint16_t *)SYMVAL(__eeprom_workarea_start__);
+
+	do {
+		if (*p++ == 0xFFFF) {
+			flashend = (uint32_t)(p - 2);
+			return;
+		}
+	} while (p < (uint16_t *)SYMVAL(__eeprom_workarea_end__));
+	flashend = (uint32_t)((uint16_t *)SYMVAL(__eeprom_workarea_end__) - 1);
+}
+
+uint8_t eeprom_read_byte(const uint8_t *addr)
+{
+	uint32_t offset = (uint32_t)addr;
+	const uint16_t *p = (uint16_t *)SYMVAL(__eeprom_workarea_start__);
+	const uint16_t *end = (const uint16_t *)((uint32_t)flashend);
+	uint16_t val;
+	uint8_t data=0xFF;
+
+	if (!end) {
+		eeprom_initialize();
+		end = (const uint16_t *)((uint32_t)flashend);
+	}
+	if (offset < EEPROM_SIZE) {
+		while (p <= end) {
+			val = *p++;
+			if ((val & 255) == offset) data = val >> 8;
+		}
+	}
+	return data;
+}
+
+static void flash_write(const uint16_t *code, uint32_t addr, uint32_t data)
+{
+	// with great power comes great responsibility....
+	uint32_t stat;
+	*(uint32_t *)&(FTFA->FCCOB3) = 0x06000000 | (addr & 0x00FFFFFC);
+	*(uint32_t *)&(FTFA->FCCOB7) = data;
+	__disable_irq();
+	(*((void (*)(volatile uint8_t *))((uint32_t)code | 1)))(&(FTFA->FSTAT));
+	__enable_irq();
+	stat = FTFA->FSTAT & (FTFA_FSTAT_RDCOLERR|FTFA_FSTAT_ACCERR|FTFA_FSTAT_FPVIOL);
+	if (stat) {
+		FTFA->FSTAT = stat;
+	}
+	MCM->PLACR |= MCM_PLACR_CFCC;
+}
+
+void eeprom_write_byte(uint8_t *addr, uint8_t data)
+{
+	uint32_t offset = (uint32_t)addr;
+	const uint16_t *p, *end = (const uint16_t *)((uint32_t)flashend);
+	uint32_t i, val, flashaddr;
+	uint16_t do_flash_cmd[] = {
+		0x2380, 0x7003, 0x7803, 0xb25b, 0x2b00, 0xdafb, 0x4770};
+	uint8_t buf[EEPROM_SIZE];
+
+	if (offset >= EEPROM_SIZE) return;
+	if (!end) {
+		eeprom_initialize();
+		end = (const uint16_t *)((uint32_t)flashend);
+	}
+	if (++end < (uint16_t *)SYMVAL(__eeprom_workarea_end__)) {
+		val = (data << 8) | offset;
+		flashaddr = (uint32_t)end;
+		flashend = flashaddr;
+		if ((flashaddr & 2) == 0) {
+			val |= 0xFFFF0000;
+		} else {
+			val <<= 16;
+			val |= 0x0000FFFF;
+		}
+		flash_write(do_flash_cmd, flashaddr, val);
+	} else {
+		for (i=0; i < EEPROM_SIZE; i++) {
+			buf[i] = 0xFF;
+		}
+		val = 0;
+		for (p = (uint16_t *)SYMVAL(__eeprom_workarea_start__); p < (uint16_t *)SYMVAL(__eeprom_workarea_end__); p++) {
+			val = *p;
+			if ((val & 255) < EEPROM_SIZE) {
+				buf[val & 255] = val >> 8;
+			}
+		}
+		buf[offset] = data;
+		for (flashaddr=(uint32_t)(uint16_t *)SYMVAL(__eeprom_workarea_start__); flashaddr < (uint32_t)(uint16_t *)SYMVAL(__eeprom_workarea_end__); flashaddr += 1024) {
+			*(uint32_t *)&(FTFA->FCCOB3) = 0x09000000 | flashaddr;
+			__disable_irq();
+			(*((void (*)(volatile uint8_t *))((uint32_t)do_flash_cmd | 1)))(&(FTFA->FSTAT));
+			__enable_irq();
+			val = FTFA->FSTAT & (FTFA_FSTAT_RDCOLERR|FTFA_FSTAT_ACCERR|FTFA_FSTAT_FPVIOL);;
+			if (val) FTFA->FSTAT = val;
+			MCM->PLACR |= MCM_PLACR_CFCC;
+		}
+		flashaddr=(uint32_t)(uint16_t *)SYMVAL(__eeprom_workarea_start__);
+		for (i=0; i < EEPROM_SIZE; i++) {
+			if (buf[i] == 0xFF) continue;
+			if ((flashaddr & 2) == 0) {
+				val = (buf[i] << 8) | i;
+			} else {
+				val = val | (buf[i] << 24) | (i << 16);
+				flash_write(do_flash_cmd, flashaddr, val);
+			}
+			flashaddr += 2;
+		}
+		flashend = flashaddr;
+		if ((flashaddr & 2)) {
+			val |= 0xFFFF0000;
+			flash_write(do_flash_cmd, flashaddr, val);
+		}
+	}
+}
+
+/*
+void do_flash_cmd(volatile uint8_t *fstat)
+{
+        *fstat = 0x80;
+        while ((*fstat & 0x80) == 0) ; // wait
+}
+00000000 <do_flash_cmd>:
+   0:	2380      	movs	r3, #128	; 0x80
+   2:	7003      	strb	r3, [r0, #0]
+   4:	7803      	ldrb	r3, [r0, #0]
+   6:	b25b      	sxtb	r3, r3
+   8:	2b00      	cmp	r3, #0
+   a:	dafb      	bge.n	4 <do_flash_cmd+0x4>
+   c:	4770      	bx	lr
+*/
+
+
+uint16_t eeprom_read_word(const uint16_t *addr)
+{
+	const uint8_t *p = (const uint8_t *)addr;
+	return eeprom_read_byte(p) | (eeprom_read_byte(p+1) << 8);
+}
+
+uint32_t eeprom_read_dword(const uint32_t *addr)
+{
+	const uint8_t *p = (const uint8_t *)addr;
+	return eeprom_read_byte(p) | (eeprom_read_byte(p+1) << 8)
+		| (eeprom_read_byte(p+2) << 16) | (eeprom_read_byte(p+3) << 24);
+}
+
+void eeprom_read_block(void *buf, const void *addr, uint32_t len)
+{
+	const uint8_t *p = (const uint8_t *)addr;
+	uint8_t *dest = (uint8_t *)buf;
+	while (len--) {
+		*dest++ = eeprom_read_byte(p++);
+	}
+}
+
+int eeprom_is_ready(void)
+{
+	return 1;
+}
+
+void eeprom_write_word(uint16_t *addr, uint16_t value)
+{
+	uint8_t *p = (uint8_t *)addr;
+	eeprom_write_byte(p++, value);
+	eeprom_write_byte(p, value >> 8);
+}
+
+void eeprom_write_dword(uint32_t *addr, uint32_t value)
+{
+	uint8_t *p = (uint8_t *)addr;
+	eeprom_write_byte(p++, value);
+	eeprom_write_byte(p++, value >> 8);
+	eeprom_write_byte(p++, value >> 16);
+	eeprom_write_byte(p, value >> 24);
+}
+
+void eeprom_write_block(const void *buf, void *addr, uint32_t len)
+{
+	uint8_t *p = (uint8_t *)addr;
+	const uint8_t *src = (const uint8_t *)buf;
+	while (len--) {
+		eeprom_write_byte(p++, *src++);
+	}
+}
+
+#else
+// No EEPROM supported, so emulate it
+
+#define EEPROM_SIZE 32
+static uint8_t buffer[EEPROM_SIZE];
+
+uint8_t eeprom_read_byte(const uint8_t *addr) {
+	uint32_t offset = (uint32_t)addr;
+	return buffer[offset];
+}
+
+void eeprom_write_byte(uint8_t *addr, uint8_t value) {
+	uint32_t offset = (uint32_t)addr;
+	buffer[offset] = value;
+}
+
+uint16_t eeprom_read_word(const uint16_t *addr) {
+	const uint8_t *p = (const uint8_t *)addr;
+	return eeprom_read_byte(p) | (eeprom_read_byte(p+1) << 8);
+}
+
+uint32_t eeprom_read_dword(const uint32_t *addr) {
+	const uint8_t *p = (const uint8_t *)addr;
+	return eeprom_read_byte(p) | (eeprom_read_byte(p+1) << 8)
+		| (eeprom_read_byte(p+2) << 16) | (eeprom_read_byte(p+3) << 24);
+}
+
+void eeprom_read_block(void *buf, const void *addr, uint32_t len) {
+	const uint8_t *p = (const uint8_t *)addr;
+	uint8_t *dest = (uint8_t *)buf;
+	while (len--) {
+		*dest++ = eeprom_read_byte(p++);
+	}
+}
+
+void eeprom_write_word(uint16_t *addr, uint16_t value) {
+	uint8_t *p = (uint8_t *)addr;
+	eeprom_write_byte(p++, value);
+	eeprom_write_byte(p, value >> 8);
+}
+
+void eeprom_write_dword(uint32_t *addr, uint32_t value) {
+	uint8_t *p = (uint8_t *)addr;
+	eeprom_write_byte(p++, value);
+	eeprom_write_byte(p++, value >> 8);
+	eeprom_write_byte(p++, value >> 16);
+	eeprom_write_byte(p, value >> 24);
+}
+
+void eeprom_write_block(const void *buf, void *addr, uint32_t len) {
+	uint8_t *p = (uint8_t *)addr;
+	const uint8_t *src = (const uint8_t *)buf;
+	while (len--) {
+		eeprom_write_byte(p++, *src++);
+	}
+}
+
+#endif /* chip selection */
+// The update functions just calls write for now, but could probably be optimized
+
+void eeprom_update_byte(uint8_t *addr, uint8_t value) {
+	eeprom_write_byte(addr, value);
+}
+
+void eeprom_update_word(uint16_t *addr, uint16_t value) {
+	uint8_t *p = (uint8_t *)addr;
+	eeprom_write_byte(p++, value);
+	eeprom_write_byte(p, value >> 8);
+}
+
+void eeprom_update_dword(uint32_t *addr, uint32_t value) {
+	uint8_t *p = (uint8_t *)addr;
+	eeprom_write_byte(p++, value);
+	eeprom_write_byte(p++, value >> 8);
+	eeprom_write_byte(p++, value >> 16);
+	eeprom_write_byte(p, value >> 24);
+}
+
+void eeprom_update_block(const void *buf, void *addr, uint32_t len) {
+	uint8_t *p = (uint8_t *)addr;
+	const uint8_t *src = (const uint8_t *)buf;
+	while (len--) {
+		eeprom_write_byte(p++, *src++);
+	}
+}
diff --git a/tmk_core/common/chibios/printf.c b/tmk_core/common/chibios/printf.c
new file mode 100644
index 0000000000..72e3d4f8c4
--- /dev/null
+++ b/tmk_core/common/chibios/printf.c
@@ -0,0 +1,240 @@
+/*
+ * found at: http://www.sparetimelabs.com/tinyprintf/tinyprintf.php
+ * and:      http://www.sparetimelabs.com/printfrevisited/printfrevisited.php
+ */
+
+/*
+File: printf.c
+
+Copyright (C) 2004  Kustaa Nyholm
+
+This library is free software; you can redistribute it and/or
+modify it under the terms of the GNU Lesser General Public
+License as published by the Free Software Foundation; either
+version 2.1 of the License, or (at your option) any later version.
+
+This library is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+Lesser General Public License for more details.
+
+You should have received a copy of the GNU Lesser General Public
+License along with this library; if not, write to the Free Software
+Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+
+*/
+
+#include "printf.h"
+
+typedef void (*putcf) (void*,char);
+static putcf stdout_putf;
+static void* stdout_putp;
+
+// this adds cca 400 bytes
+#define PRINTF_LONG_SUPPORT
+
+#ifdef PRINTF_LONG_SUPPORT
+
+static void uli2a(unsigned long int num, unsigned int base, int uc,char * bf)
+    {
+    int n=0;
+    unsigned int d=1;
+    while (num/d >= base)
+        d*=base;         
+    while (d!=0) {
+        int dgt = num / d;
+        num%=d;
+        d/=base;
+        if (n || dgt>0|| d==0) {
+            *bf++ = dgt+(dgt<10 ? '0' : (uc ? 'A' : 'a')-10);
+            ++n;
+            }
+        }
+    *bf=0;
+    }
+
+static void li2a (long num, char * bf)
+    {
+    if (num<0) {
+        num=-num;
+        *bf++ = '-';
+        }
+    uli2a(num,10,0,bf);
+    }
+
+#endif
+
+static void ui2a(unsigned int num, unsigned int base, int uc,char * bf)
+    {
+    int n=0;
+    unsigned int d=1;
+    while (num/d >= base)
+        d*=base;        
+    while (d!=0) {
+        int dgt = num / d;
+        num%= d;
+        d/=base;
+        if (n || dgt>0 || d==0) {
+            *bf++ = dgt+(dgt<10 ? '0' : (uc ? 'A' : 'a')-10);
+            ++n;
+            }
+        }
+    *bf=0;
+    }
+
+static void i2a (int num, char * bf)
+    {
+    if (num<0) {
+        num=-num;
+        *bf++ = '-';
+        }
+    ui2a(num,10,0,bf);
+    }
+
+static int a2d(char ch)
+    {
+    if (ch>='0' && ch<='9') 
+        return ch-'0';
+    else if (ch>='a' && ch<='f')
+        return ch-'a'+10;
+    else if (ch>='A' && ch<='F')
+        return ch-'A'+10;
+    else return -1;
+    }
+
+static char a2i(char ch, char** src,int base,int* nump)
+    {
+    char* p= *src;
+    int num=0;
+    int digit;
+    while ((digit=a2d(ch))>=0) {
+        if (digit>base) break;
+        num=num*base+digit;
+        ch=*p++;
+        }
+    *src=p;
+    *nump=num;
+    return ch;
+    }
+
+static void putchw(void* putp,putcf putf,int n, char z, char* bf)
+    {
+    char fc=z? '0' : ' ';
+    char ch;
+    char* p=bf;
+    while (*p++ && n > 0)
+        n--;
+    while (n-- > 0) 
+        putf(putp,fc);
+    while ((ch= *bf++))
+        putf(putp,ch);
+    }
+
+void tfp_format(void* putp,putcf putf,char *fmt, va_list va)
+    {
+    char bf[12];
+    
+    char ch;
+
+
+    while ((ch=*(fmt++))) {
+        if (ch!='%') 
+            putf(putp,ch);
+        else {
+            char lz=0;
+#ifdef  PRINTF_LONG_SUPPORT
+            char lng=0;
+#endif
+            int w=0;
+            ch=*(fmt++);
+            if (ch=='0') {
+                ch=*(fmt++);
+                lz=1;
+                }
+            if (ch>='0' && ch<='9') {
+                ch=a2i(ch,&fmt,10,&w);
+                }
+#ifdef  PRINTF_LONG_SUPPORT
+            if (ch=='l') {
+                ch=*(fmt++);
+                lng=1;
+            }
+#endif
+            switch (ch) {
+                case 0: 
+                    goto abort;
+                case 'u' : {
+#ifdef  PRINTF_LONG_SUPPORT
+                    if (lng)
+                        uli2a(va_arg(va, unsigned long int),10,0,bf);
+                    else
+#endif
+                    ui2a(va_arg(va, unsigned int),10,0,bf);
+                    putchw(putp,putf,w,lz,bf);
+                    break;
+                    }
+                case 'd' :  {
+#ifdef  PRINTF_LONG_SUPPORT
+                    if (lng)
+                        li2a(va_arg(va, unsigned long int),bf);
+                    else
+#endif
+                    i2a(va_arg(va, int),bf);
+                    putchw(putp,putf,w,lz,bf);
+                    break;
+                    }
+                case 'x': case 'X' : 
+#ifdef  PRINTF_LONG_SUPPORT
+                    if (lng)
+                        uli2a(va_arg(va, unsigned long int),16,(ch=='X'),bf);
+                    else
+#endif
+                    ui2a(va_arg(va, unsigned int),16,(ch=='X'),bf);
+                    putchw(putp,putf,w,lz,bf);
+                    break;
+                case 'c' : 
+                    putf(putp,(char)(va_arg(va, int)));
+                    break;
+                case 's' : 
+                    putchw(putp,putf,w,0,va_arg(va, char*));
+                    break;
+                case '%' :
+                    putf(putp,ch);
+                default:
+                    break;
+                }
+            }
+        }
+    abort:;
+    }
+
+
+void init_printf(void* putp,void (*putf) (void*,char))
+    {
+    stdout_putf=putf;
+    stdout_putp=putp;
+    }
+
+void tfp_printf(char *fmt, ...)
+    {
+    va_list va;
+    va_start(va,fmt);
+    tfp_format(stdout_putp,stdout_putf,fmt,va);
+    va_end(va);
+    }
+
+static void putcp(void* p,char c)
+    {
+    *(*((char**)p))++ = c;
+    }
+
+
+
+void tfp_sprintf(char* s,char *fmt, ...)
+    {
+    va_list va;
+    va_start(va,fmt);
+    tfp_format(&s,putcp,fmt,va);
+    putcp(&s,0);
+    va_end(va);
+    }
diff --git a/tmk_core/common/chibios/printf.h b/tmk_core/common/chibios/printf.h
new file mode 100644
index 0000000000..678a100c6e
--- /dev/null
+++ b/tmk_core/common/chibios/printf.h
@@ -0,0 +1,111 @@
+/*
+ * found at: http://www.sparetimelabs.com/tinyprintf/tinyprintf.php
+ * and:      http://www.sparetimelabs.com/printfrevisited/printfrevisited.php
+ */
+
+/*
+File: printf.h
+
+Copyright (C) 2004  Kustaa Nyholm
+
+This library is free software; you can redistribute it and/or
+modify it under the terms of the GNU Lesser General Public
+License as published by the Free Software Foundation; either
+version 2.1 of the License, or (at your option) any later version.
+
+This library is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  
+See the GNU Lesser General Public License for more details.
+
+You should have received a copy of the GNU Lesser General Public
+License along with this library; if not, write to the Free Software
+Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+
+This library is realy just two files: 'printf.h' and 'printf.c'.
+
+They provide a simple and small (+200 loc) printf functionality to 
+be used in embedded systems.
+
+I've found them so usefull in debugging that I do not bother with a 
+debugger at all.
+
+They are distributed in source form, so to use them, just compile them 
+into your project. 
+
+Two printf variants are provided: printf and sprintf. 
+
+The formats supported by this implementation are: 'd' 'u' 'c' 's' 'x' 'X'.
+
+Zero padding and field width are also supported.
+
+If the library is compiled with 'PRINTF_SUPPORT_LONG' defined then the 
+long specifier is also
+supported. Note that this will pull in some long math routines (pun intended!)
+and thus make your executable noticably longer.
+
+The memory foot print of course depends on the target cpu, compiler and 
+compiler options, but a rough guestimate (based on a H8S target) is about 
+1.4 kB for code and some twenty 'int's and 'char's, say 60 bytes of stack space. 
+Not too bad. Your milage may vary. By hacking the source code you can 
+get rid of some hunred bytes, I'm sure, but personally I feel the balance of 
+functionality and flexibility versus  code size is close to optimal for
+many embedded systems.
+
+To use the printf you need to supply your own character output function, 
+something like :
+
+    void putc ( void* p, char c)
+        {
+        while (!SERIAL_PORT_EMPTY) ;
+        SERIAL_PORT_TX_REGISTER = c;
+        }
+
+Before you can call printf you need to initialize it to use your 
+character output function with something like:
+
+    init_printf(NULL,putc);
+
+Notice the 'NULL' in 'init_printf' and the parameter 'void* p' in 'putc', 
+the NULL (or any pointer) you pass into the 'init_printf' will eventually be 
+passed to your 'putc' routine. This allows you to pass some storage space (or 
+anything realy) to the character output function, if necessary. 
+This is not often needed but it was implemented like that because it made 
+implementing the sprintf function so neat (look at the source code).
+
+The code is re-entrant, except for the 'init_printf' function, so it 
+is safe to call it from interupts too, although this may result in mixed output. 
+If you rely on re-entrancy, take care that your 'putc' function is re-entrant!
+
+The printf and sprintf functions are actually macros that translate to 
+'tfp_printf' and 'tfp_sprintf'. This makes it possible
+to use them along with 'stdio.h' printf's in a single source file. 
+You just need to undef the names before you include the 'stdio.h'.
+Note that these are not function like macros, so if you have variables
+or struct members with these names, things will explode in your face.
+Without variadic macros this is the best we can do to wrap these
+fucnction. If it is a problem just give up the macros and use the
+functions directly or rename them.
+
+For further details see source code.
+
+regs Kusti, 23.10.2004
+*/
+
+
+#ifndef __TFP_PRINTF__
+#define __TFP_PRINTF__
+
+#include <stdarg.h>
+
+void init_printf(void* putp,void (*putf) (void*,char));
+
+void tfp_printf(char *fmt, ...);
+void tfp_sprintf(char* s,char *fmt, ...);
+
+void tfp_format(void* putp,void (*putf) (void*,char),char *fmt, va_list va);
+
+#define printf tfp_printf 
+#define sprintf tfp_sprintf 
+
+#endif
diff --git a/tmk_core/common/chibios/sleep_led.c b/tmk_core/common/chibios/sleep_led.c
new file mode 100644
index 0000000000..4c35cfcbac
--- /dev/null
+++ b/tmk_core/common/chibios/sleep_led.c
@@ -0,0 +1,226 @@
+#include "ch.h"
+#include "hal.h"
+
+#include "led.h"
+#include "sleep_led.h"
+
+/* All right, we go the "software" way: timer, toggle LED in interrupt.
+ * Based on hasu's code for AVRs.
+ * Use LP timer on Kinetises, TIM14 on STM32F0.
+ */
+
+#if defined(KL2x) || defined(K20x)
+
+/* Use Low Power Timer (LPTMR) */
+#define TIMER_INTERRUPT_VECTOR KINETIS_LPTMR0_IRQ_VECTOR
+#define RESET_COUNTER LPTMR0->CSR |= LPTMRx_CSR_TCF
+
+#elif defined(STM32F0XX)
+
+/* Use TIM14 manually */
+#define TIMER_INTERRUPT_VECTOR STM32_TIM14_HANDLER
+#define RESET_COUNTER STM32_TIM14->SR &= ~STM32_TIM_SR_UIF
+
+#endif
+
+#if defined(KL2x) || defined(K20x) || defined(STM32F0XX) /* common parts for timers/interrupts */
+
+/* Breathing Sleep LED brighness(PWM On period) table
+ * (64[steps] * 4[duration]) / 64[PWM periods/s] = 4 second breath cycle
+ *
+ * http://www.wolframalpha.com/input/?i=%28sin%28+x%2F64*pi%29**8+*+255%2C+x%3D0+to+63
+ * (0..63).each {|x| p ((sin(x/64.0*PI)**8)*255).to_i }
+ */
+static const uint8_t breathing_table[64] = {
+0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 2, 4, 6, 10,
+15, 23, 32, 44, 58, 74, 93, 113, 135, 157, 179, 199, 218, 233, 245, 252,
+255, 252, 245, 233, 218, 199, 179, 157, 135, 113, 93, 74, 58, 44, 32, 23,
+15, 10, 6, 4, 2, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
+};
+
+/* interrupt handler */
+OSAL_IRQ_HANDLER(TIMER_INTERRUPT_VECTOR) {
+    OSAL_IRQ_PROLOGUE();
+
+    /* Software PWM
+    * timer:1111 1111 1111 1111
+    *       \_____/\/ \_______/____  count(0-255)
+    *          \    \______________  duration of step(4)
+    *           \__________________  index of step table(0-63)
+    */
+
+    // this works for cca 65536 irqs/sec
+    static union {
+    uint16_t row;
+    struct {
+      uint8_t count:8;
+      uint8_t duration:2;
+      uint8_t index:6;
+    } pwm;
+    } timer = { .row = 0 };
+
+    timer.row++;
+
+    // LED on
+    if (timer.pwm.count == 0) {
+        led_set(1<<USB_LED_CAPS_LOCK);
+    }
+    // LED off
+    if (timer.pwm.count == breathing_table[timer.pwm.index]) {
+        led_set(0);
+    }
+
+    /* Reset the counter */
+    RESET_COUNTER;
+
+    OSAL_IRQ_EPILOGUE();
+}
+
+#endif /* common parts for known platforms */
+
+
+#if defined(KL2x) || defined(K20x) /* platform selection: familiar Kinetis chips */
+
+/* LPTMR clock options */
+#define LPTMR_CLOCK_MCGIRCLK 0 /* 4MHz clock */
+#define LPTMR_CLOCK_LPO      1 /* 1kHz clock */
+#define LPTMR_CLOCK_ERCLK32K 2 /* external 32kHz crystal */
+#define LPTMR_CLOCK_OSCERCLK 3 /* output from OSC */
+
+/* Work around inconsistencies in Freescale naming */
+#if !defined(SIM_SCGC5_LPTMR)
+#define SIM_SCGC5_LPTMR SIM_SCGC5_LPTIMER
+#endif
+
+/* Initialise the timer */
+void sleep_led_init(void) {
+    /* Make sure the clock to the LPTMR is enabled */
+    SIM->SCGC5 |= SIM_SCGC5_LPTMR;
+    /* Reset LPTMR settings */
+    LPTMR0->CSR = 0;
+    /* Set the compare value */
+    LPTMR0->CMR = 0;  // trigger on counter value (i.e. every time)
+
+    /* Set up clock source and prescaler */
+    /* Software PWM
+    *  ______           ______           __
+    * |  ON  |___OFF___|  ON  |___OFF___|   ....
+    * |<-------------->|<-------------->|<- ....
+    *     PWM period       PWM period
+    *
+    * R                interrupts/period[resolution]
+    * F                periods/second[frequency]
+    * R * F            interrupts/second
+    */
+
+    /* === OPTION 1 === */
+    #if 0
+    //  1kHz LPO
+    //  No prescaler => 1024 irqs/sec
+    //  Note: this is too slow for a smooth breathe
+    LPTMR0->PSR = LPTMRx_PSR_PCS(LPTMR_CLOCK_LPO)|LPTMRx_PSR_PBYP;
+    #endif /* OPTION 1 */
+
+    /* === OPTION 2 === */
+    #if 1
+    //  nMHz IRC (n=4 on KL25Z, KL26Z and K20x; n=2 or 8 on KL27Z)
+    MCG->C2 |= MCG_C2_IRCS; // fast (4MHz) internal ref clock
+    #if defined(KL27) // divide the 8MHz IRC by 2, to have the same MCGIRCLK speed as others
+    MCG->MC |= MCG_MC_LIRC_DIV2_DIV2;
+    #endif /* KL27 */
+    MCG->C1 |= MCG_C1_IRCLKEN; // enable internal ref clock
+    //  to work in stop mode, also MCG_C1_IREFSTEN
+    //  Divide 4MHz by 2^N (N=6) => 62500 irqs/sec =>
+    //  => approx F=61, R=256, duration = 4
+    LPTMR0->PSR = LPTMRx_PSR_PCS(LPTMR_CLOCK_MCGIRCLK)|LPTMRx_PSR_PRESCALE(6);
+    #endif /* OPTION 2 */
+
+    /* === OPTION 3 === */
+    #if 0
+    //  OSC output (external crystal), usually 8MHz or 16MHz
+    OSC0->CR |= OSC_CR_ERCLKEN; // enable ext ref clock
+    //  to work in stop mode, also OSC_CR_EREFSTEN
+    //  Divide by 2^N
+    LPTMR0->PSR = LPTMRx_PSR_PCS(LPTMR_CLOCK_OSCERCLK)|LPTMRx_PSR_PRESCALE(7);
+    #endif /* OPTION 3 */
+    /* === END OPTIONS === */
+
+    /* Interrupt on TCF set (compare flag) */
+    nvicEnableVector(LPTMR0_IRQn, 2); // vector, priority
+    LPTMR0->CSR |= LPTMRx_CSR_TIE;
+}
+
+void sleep_led_enable(void) {
+    /* Enable the timer */
+    LPTMR0->CSR |= LPTMRx_CSR_TEN;
+}
+
+void sleep_led_disable(void) {
+    /* Disable the timer */
+    LPTMR0->CSR &= ~LPTMRx_CSR_TEN;
+}
+
+void sleep_led_toggle(void) {
+    /* Toggle the timer */
+    LPTMR0->CSR ^= LPTMRx_CSR_TEN;
+}
+
+#elif defined(STM32F0XX) /* platform selection: STM32F0XX */
+
+/* Initialise the timer */
+void sleep_led_init(void) {
+    /* enable clock */
+    rccEnableTIM14(FALSE); /* low power enable = FALSE */
+    rccResetTIM14();
+
+    /* prescale */
+    /* Assuming 48MHz internal clock */
+    /* getting cca 65484 irqs/sec */
+    STM32_TIM14->PSC = 733;
+
+    /* auto-reload */
+    /* 0 => interrupt every time */
+    STM32_TIM14->ARR = 3;
+
+    /* enable counter update event interrupt */
+    STM32_TIM14->DIER |= STM32_TIM_DIER_UIE;
+
+    /* register interrupt vector */
+    nvicEnableVector(STM32_TIM14_NUMBER, 2); /* vector, priority */
+}
+
+void sleep_led_enable(void) {
+    /* Enable the timer */
+    STM32_TIM14->CR1 = STM32_TIM_CR1_CEN | STM32_TIM_CR1_URS;
+    /* URS => update event only on overflow; setting UG bit disabled */
+}
+
+void sleep_led_disable(void) {
+    /* Disable the timer */
+    STM32_TIM14->CR1 = 0;
+}
+
+void sleep_led_toggle(void) {
+    /* Toggle the timer */
+    STM32_TIM14->CR1 ^= STM32_TIM_CR1_CEN;
+}
+
+
+#else /* platform selection: not on familiar chips */
+
+void sleep_led_init(void) {
+}
+ 
+void sleep_led_enable(void) {
+    led_set(1<<USB_LED_CAPS_LOCK);
+}
+ 
+void sleep_led_disable(void) {
+    led_set(0);
+}
+ 
+void sleep_led_toggle(void) {
+    // not implemented
+}
+
+#endif /* platform selection */
\ No newline at end of file
diff --git a/tmk_core/common/chibios/suspend.c b/tmk_core/common/chibios/suspend.c
new file mode 100644
index 0000000000..6ca16034f3
--- /dev/null
+++ b/tmk_core/common/chibios/suspend.c
@@ -0,0 +1,65 @@
+/* TODO */
+
+#include "ch.h"
+#include "hal.h"
+
+#include "matrix.h"
+#include "action.h"
+#include "action_util.h"
+#include "mousekey.h"
+#include "host.h"
+#include "backlight.h"
+#include "suspend.h"
+
+void suspend_idle(uint8_t time) {
+	// TODO: this is not used anywhere - what units is 'time' in?
+	chThdSleepMilliseconds(time);
+}
+
+void suspend_power_down(void) {
+	// TODO: figure out what to power down and how
+	// shouldn't power down TPM/FTM if we want a breathing LED
+	// also shouldn't power down USB
+
+	// on AVR, this enables the watchdog for 15ms (max), and goes to
+	// SLEEP_MODE_PWR_DOWN
+
+	chThdSleepMilliseconds(17);
+}
+
+__attribute__ ((weak)) void matrix_power_up(void) {}
+__attribute__ ((weak)) void matrix_power_down(void) {}
+bool suspend_wakeup_condition(void)
+{
+    matrix_power_up();
+    matrix_scan();
+    matrix_power_down();
+    for (uint8_t r = 0; r < MATRIX_ROWS; r++) {
+        if (matrix_get_row(r)) return true;
+    }
+    return false;
+}
+
+// run immediately after wakeup
+void suspend_wakeup_init(void)
+{
+    // clear keyboard state
+    // need to do it manually, because we're running from ISR
+    //  and clear_keyboard() calls print
+    // so only clear the variables in memory
+    // the reports will be sent from main.c afterwards
+    // or if the PC asks for GET_REPORT
+    clear_mods();
+    clear_weak_mods();
+    clear_keys();
+#ifdef MOUSEKEY_ENABLE
+    mousekey_clear();
+#endif /* MOUSEKEY_ENABLE */
+#ifdef EXTRAKEY_ENABLE
+    host_system_send(0);
+    host_consumer_send(0);
+#endif /* EXTRAKEY_ENABLE */
+#ifdef BACKLIGHT_ENABLE
+    backlight_init();
+#endif /* BACKLIGHT_ENABLE */
+}
diff --git a/tmk_core/common/chibios/timer.c b/tmk_core/common/chibios/timer.c
new file mode 100644
index 0000000000..3de4cc368b
--- /dev/null
+++ b/tmk_core/common/chibios/timer.c
@@ -0,0 +1,27 @@
+#include "ch.h"
+
+#include "timer.h"
+
+void timer_init(void) {}
+
+void timer_clear(void) {}
+
+uint16_t timer_read(void)
+{
+    return (uint16_t)ST2MS(chVTGetSystemTime());
+}
+
+uint32_t timer_read32(void)
+{
+    return ST2MS(chVTGetSystemTime());
+}
+
+uint16_t timer_elapsed(uint16_t last)
+{
+    return (uint16_t)(ST2MS(chVTTimeElapsedSinceX(MS2ST(last))));
+}
+
+uint32_t timer_elapsed32(uint32_t last)
+{
+    return ST2MS(chVTTimeElapsedSinceX(MS2ST(last)));
+}